We are currently using the fork by Adam, with support for duktape as a
JS engine. But upstream has finally merged that just a day ago. Woohoo!
Between the fork we were using and upstream, there are very little
changes, mostly centered around:
- translations
- buildsystem
- duktape
- CVE-2021-4034
So, we just switch to using the HEAD of the repo: it has not much more
than the two important changes: duktape and the CVE fix.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Marek Belisko <marek.belisko@open-nandra.com>
Cc: Adam Duskett <aduskett@gmail.com>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 4aecb964af)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is needed for polkit to work with SELinux.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit b89163a067)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Drop upstreamed patches
- change the location of polkit.its and polkit.loc to match their
new locations.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 079528bb9c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2021-20330: An attacker with basic CRUD permissions on a
replicated collection can run the applyOps command with specially
malformed oplog entries, resulting in a potential denial of service on
secondaries. This issue affects MongoDB Server v4.0 versions prior to
4.0.25; MongoDB Server v4.2 versions prior to 4.2.14; MongoDB Server
v4.4 versions prior to 4.4.6.
Drop third patch (already in version)
https://docs.mongodb.com/master/release-notes/4.2/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 49bbf644d4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CVE-2021-43816: "Unprivileged pod using `hostPath` can side-step active LSM when
it is SELinux"
Containers launched through containerd’s CRI implementation on Linux systems
which use the SELinux security module and containerd versions since v1.5.0 can
cause arbitrary files and directories on the host to be relabeled to match the
container process label through the use of specially-configured bind mounts in a
hostPath volume. This relabeling elevates permissions for the container,
granting full read/write access over the affected files and directories.
Kubernetes and crictl can both be configured to use containerd’s CRI
implementation.
https://github.com/advisories/GHSA-mvff-h3cj-wj9chttps://github.com/containerd/containerd/releases/tag/v1.5.9
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 935bd589a3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
pjsip:pjsip has been deprecated by teluu:pjsip since September 2021:
<cpe-23:cpe23-item name="cpe:2.3:a:pjsip:pjsip:2.7.1:*:*:*:*:*:*:*">
<cpe-23:deprecated-by name="cpe:2.3:a:teluu:pjsip:2.7.1:*:*:*:*:*:*:*" type="NAME_CORRECTION"/>
<cpe-item name="cpe:/a:pjsip:pjsip:2.7.2" deprecated="true" deprecation_date="2021-09-02T14:49:19.527Z">
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c99d84fb96)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changelog (since 1.1.7):
8b70f08 Add definition of new event GstAppSinkCallbacks for interpipesink element
ddaa9b5 Add conditional build according to GST_VERSION_MINOR
730dea6 Bump project version
8718b12 Add initialization for the GstAppSinkCallbacks struct
f015ff7 Remove redundant initialization of new_event callback
530da92 Update copyright year in README file
e8ce826 Add explanatory comment on the memset of GstAppSinkCallbacks struct
f0f3b8e Fix README copyright date to 2016-2022
814982e Merge branch 'hotfix/add-new-event-callback'
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 0872ac72b7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
TinyXML through 2.6.2 has an infinite loop in TiXmlParsingData::Stamp in
tinyxmlparser.cpp via the TIXML_UTF_LEAD_0 case. It can be triggered by
a crafted XML message and leads to a denial of service.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b23ef21029)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
5.15.2 is the last public release of 5.15 and does not contain this CVE
fix. However, >=6.1.2 and >5.12.12 all contain the necessary patches so
let's port them to 5.15.2.
Technically only the first two patches are required to patch the CVE.
However, the second patch introduces a regression that is fixed in the third
patch.
The patches are taken from KDE kde/5.15 git branch.
Cc: Quentin Schulz <foss+buildroot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 9151eab3c7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr: also change in Config.in]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit f6297befe1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
Improper handling of URI Subject Alternative Names (Medium)(CVE-2021-44531)
Accepting arbitrary Subject Alternative Name (SAN) types, unless a PKI is
specifically defined to use a particular SAN type, can result in bypassing
name-constrained intermediates. Node.js was accepting URI SAN types, which
PKIs are often not defined to use. Additionally, when a protocol allows URI
SANs, Node.js did not match the URI correctly.
Certificate Verification Bypass via String Injection (Medium)(CVE-2021-44532)
Node.js converts SANs (Subject Alternative Names) to a string format. It
uses this string to check peer certificates against hostnames when
validating connections. The string format was subject to an injection
vulnerability when name constraints were used within a certificate chain,
allowing the bypass of these name constraints.
Incorrect handling of certificate subject and issuer fields (Medium)(CVE-2021-44533)
Node.js did not handle multi-value Relative Distinguished Names correctly.
Attackers could craft certificate subjects containing a single-value
Relative Distinguished Name that would be interpreted as a multi-value
Relative Distinguished Name, for example, in order to inject a Common Name
that would allow bypassing the certificate subject verification.
Prototype pollution via console.table properties (Low)(CVE-2022-21824)
Due to the formatting logic of the console.table() function it was not safe
to allow user controlled input to be passed to the properties parameter
while simultaneously passing a plain object with at least one property as
the first parameter, which could be __proto__. The prototype pollution has
very limited control, in that it only allows an empty string to be assigned
numerical keys of the object prototype.
For details, see the advisory:
https://nodejs.org/en/blog/vulnerability/jan-2022-security-releases/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 9096036f00)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Ghostscript GhostPDL 9.50 through 9.54.0 has a heap-based buffer
overflow in sampled_data_finish (called from sampled_data_continue and
interp).
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit c817641331)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Ghostscript GhostPDL 9.50 through 9.53.3 has a use-after-free in
sampled_data_sample (called from sampled_data_continue and interp).
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 70910c4092)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2020-13867: Open-iSCSI targetcli-fb through 2.1.52 has weak
permissions for /etc/target (and for the backup directory and backup
files).
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 488f92a1c3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2021-4192: vim is vulnerable to Use After Free
Fix CVE-2021-4193: vim is vulnerable to Out-of-bounds Read
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 33a3f1f30d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The commit 2f50686401 added a patch for
util-linux, but forgot to create a symlink to util-linux-libs. This
results in inconsistent libblkid.so builds from util-linux and
util-linux-libs.
If you enable BR2_PER_PACKAGE_DIRECTORIES, you will find that different
libblkid.so is used in different
$(BASE_DIR)/per-package/$(PKG)_NAME/target.
Signed-off-by: TIAN Yuanhao <tianyuanhao3@163.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 93d23ef91f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with introspection:
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/riscv32-buildroot-linux-gnu/sysroot/usr/bin/g-ir-compiler gst/rtsp-server/GstRtspServer-1.0.gir --output gst/rtsp-server/GstRtspServer-1.0.typelib --includedir=/usr/share/gir-1.0
Could not find GIR file 'Gst-1.0.gir'; check XDG_DATA_DIRS or use --includedir
error parsing file gst/rtsp-server/GstRtspServer-1.0.gir: Failed to parse included gir Gst-1.0
If the above error message is about missing .so libraries, then setting up GIR_EXTRA_LIBS_PATH in the .mk file should help.
Typically like this: PKG_MAKE_ENV += GIR_EXTRA_LIBS_PATH="$(@D)/.libs"
Fixes:
- http://autobuild.buildroot.org/results/04af6b22cfa0cffb6a3109a3b32b27137ad2e0b0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit fa3e7a63b9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
He has privately requested to no longer be notified regarding this
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit f51be73f25)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 4dff1be05e (package/libvirt: libvirtd needs C++ for nmap-ncat)
introduce a recursive dependency (really: a circular dependency):
package/busybox/Config.in:33:error: recursive dependency detected!
package/busybox/Config.in:33: symbol BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is selected by BR2_PACKAGE_EBTABLES_UTILS_SAVE
package/ebtables/Config.in:11: symbol BR2_PACKAGE_EBTABLES_UTILS_SAVE depends on BR2_PACKAGE_EBTABLES
package/ebtables/Config.in:1: symbol BR2_PACKAGE_EBTABLES is selected by BR2_PACKAGE_LIBVIRT_DAEMON
package/libvirt/Config.in:44: symbol BR2_PACKAGE_LIBVIRT_DAEMON depends on BR2_PACKAGE_NETCAT_OPENBSD
package/netcat-openbsd/Config.in:1: symbol BR2_PACKAGE_NETCAT_OPENBSD depends on BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
As usual with this kind of circular depednency, it is not trivial to see
what the real cuplrit is, or where to cut the circle.
A simple solution in this case is to drop the C++ dependency, and switch
the netcat-openbsd and nmap-ncat dependencies conditions.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit f81242ae4f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised since commit
fbf25acfbf:
WARNING: unmet direct dependencies detected for BR2_PACKAGE_NMAP
Depends on [n]: BR2_INSTALL_LIBSTDCPP [=n] && BR2_USE_MMU [=y] && BR2_TOOLCHAIN_HAS_THREADS [=y]
Selected by [y]:
- BR2_PACKAGE_LIBVIRT_DAEMON [=y] && BR2_PACKAGE_LIBVIRT [=y] && !BR2_PACKAGE_NETCAT_OPENBSD [=n]
Fixes:
- No autobuilder failures (yet)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: C++ only needed without NETCAT_OPENBSD]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 4dff1be05e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
sasl depends on libsasl2 (https://github.com/cyrusimap/cyrus-sasl) which
is not packaged yet in buildroot and will result in the following build
failure raised since commit fbf25acfbf:
output/build/libvirt-7.7.0/meson.build:1212:2: ERROR: Dependency "libsasl2" not found, tried pkgconfig
Fixes:
- No autobuilder failures (yet)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit ba2016dc04)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
support/scripts/pkg-stats:1171:8: E713 test for membership should be 'not in'
support/scripts/pkg-stats:1175:8: E713 test for membership should be 'not in'
support/scripts/pkg-stats:1179:8: E713 test for membership should be 'not in'
3 E713 test for membership should be 'not in'
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/1955772278
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 02e679d8bf)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When debugging pkg-stats, it's quite useful to be able to disable some
features that are quite long (checking upstream URL, checking latest
version, checking CVE). This commit adds a --disable option, which can
take a comma-separated list of features to disable, such as:
./support/scripts/pkg-stats --disable url,upstream
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b102352b62)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The .affects() method of the CVE class in support/scripts/cve.py can
return 3 values: CVE_AFFECTS, CVE_DOESNT_AFFECT and CVE_UNKNOWN.
We of course properly account for CVEs where .affects() return
CVE_AFFECTS, but the ones for which CVE_UNKNOWN is returned are
currently ignored, and therefore treated as if they did not affect the
package.
However CVE_UNKNOWN in fact indicates that the v_start/v_end fields of
the CPE entry could not be parsed by
distutils.version.LooseVersion(). Instead of ignoring such cases, this
commit adds support for the concept of "unsure CVEs", which will be
listed next to CVEs known to affect the package, so that we are aware
of them and can investigate the version issue.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a206bbc5fe)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
s/interperter/interpreter/ and drop 'use use' / 'depend on use'.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 65054d1a19)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
riscv64gc was made available for BR2_riscv, but RISC-V can be 32-bit
or 64-bit, so we need to restrict it to BR2_RISCV_64. There's no need
to keep the BR2_riscv dependency, as BR2_RISCV_64 can only be true
when BR2_riscv is true.
Also, BR2_PACKAGE_HOST_RUSTC_ARCH needs to be set to riscv64gc to
allow rust-bin to download its pre-compiled standard library
correctly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 79c5639597)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_PACKAGE_HOST_RUSTC_ARCH only had a special value for
BR2_ARM_CPU_ARMV7A, but it also needs a special value for
BR2_ARM_CPU_ARMV5, as the pre-compiled Rust standard library for
ARMv5TE is identified with the "armv5te" architecture name, see
https://doc.rust-lang.org/nightly/rustc/platform-support.html.
We noticed this because Rust binaries wouldn't work on an ARMv5
platform (Illegal instruction). This was due to the usage of the
arm-unknown-linux-gnueabi variant of the Rust standard library, which
is for ARMv6. Thanks to this commit, we correctly use the
armv5te-unknown-linux-gnueabi variant, and Rust binaries work properly
on ARMv5TE.
A better approach would be to do the conversion from architecture
options to Rust tuples in a single string symbol that also defines the
supported architectures, similar to how it's done in e.g. openblas.
However, that's a much bigger change. So for now, just do the easy thing
and fix this one issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 1ed4147e76)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The comments were *after* the option they applied to, which was
confusing, so bring back the comments before the option they apply to.
In addition, instead of saying "this option", explicitly name the
option to clear any ambiguity.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 2b5f7ce292)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 1bf512e9ff wrongly added that
BR2_USE_WCHAR is due to flac dependency but flac is optional so remove
this comment and add boost instead
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 20584d1ef2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fixed: [CVE-2021-46141]
Fix a bug affecting both uriNormalizeSyntax* and uriMakeOwner*
functions where the text range in .hostText would not be duped using
malloc but remain unchanged (and hence "not owned") for URIs with
an IPv4 or IPv6 address hostname; depending on how an application
uses uriparser, this could lead the application into a use-after-free
situation.
As the second half, fix uriFreeUriMembers* functions that would not
free .hostText memory for URIs with an IPv4 or IPv6 address host;
also, calling uriFreeUriMembers* multiple times on a URI of this
very nature would result in trying to free pointers to stack
(rather than heap) memory.
- Fixed: [CVE-2021-46142]
Fix functions uriNormalizeSyntax* for out-of-memory situations
(i.e. malloc returning NULL) for URIs containing empty segments
(any of user info, host text, query, or fragment) where previously
pointers to stack (rather than heap) memory were freed.
https://github.com/uriparser/uriparser/blob/uriparser-0.9.6/ChangeLog
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit e00379361e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
pyqt5 uses qmake internally, but is python package rather than a qmake
package. Therefore, we need to manually apply the same fixup as for
qmake packages.
Without this, top-level parallel build may fail because dependencies are
looked for in the qt5 per-package staging directory instead of the
python-pyqt5 one.
Signed-off-by: Florent AUMAITRE <florent.aumaitre@medianesysteme.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 51c22b4ba9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Set PYTHON_EXECUTABLE to avoid the following build failure when
BR2_PACKAGE_PYTHON is enabled but libiio finds python3 without
setuptools on host:
-- Found Python: /usr/bin/python3.5 (found version "3.5.3") found components: Interpreter
-- new
-- Python_EXECUTABLE /usr/bin/python3.5
[...]
Traceback (most recent call last):
File "/home/buildroot/autobuild/instance-0/output-1/build/libiio-0.23/bindings/python/setup.py", line 15, in <module>
from setuptools import setup
ImportError: No module named 'setuptools'
Fixes:
- http://autobuild.buildroot.org/results/d80e56e4ad84c8e7f244cf6d1cb96c116e8eb734
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit f384de4f4e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 593683b45f (package/tpm2-tss: remove unused dependency)
removed the build-time dependency (in the .mk), but forgot to
remove it from the Config.in.
Signed-off-by: Tilman Keskinöz <arved@arved.at>
[yann.morin.1998@free.fr: reword commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit cbb70493af)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Make 4.3 is buggy and when parallel building host-libnss/libnss we end up
with a failure thrown by make itself. So let's work-around this by don't
parallel build the package if Make version is 4.3.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 540029eb45)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Flare games use OGG audio file format througt SDL2-mixer.
Without OGG support, flare-engine trigger a lot of errors in its
log and fail to start the game.
ERROR: SoundManager: ItemManager: Loading sound /usr/share/flare/mods/fantasycore/soundfx/inventory/inventory_gem.ogg (soundfx/inventory/inventory_gem.ogg) failed: Unrecognized audio format
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 1f66c3557a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_V4L2CODECS option has a
dependency on BR2_PACKAGE_HAS_UDEV, but no Config.in comment was added
about this dependency. This commit addresses that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 029a3c3ed7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Set HOSTCC_NOCCACHE and HOSTCXX_NOCCACHE only if they are not
set. This allows recursive calls to "make" to work as intended in the
presence of ccache. Such recursive calls to "make" can for example
happen if one calls "make legal-info" from within a post-build script,
to integrate some results of the legal-info output into the root
filesystem.
Without guarding these variables, a recursive invocation of make would
re-define
HOSTCC_NOCCACHE := $(HOSTCC)
and
HOSTCXX_NOCCACHE := $(HOSTCXX)
at a point in time when HOSTCC and HOSTCXX already point to ccache.
It used to work by "accident" until
ca6a2907c2 ("make: support: use `command
-v' instead of `which'"), due to how "which" was behaving when invoked
with multiple arguments. After switching to "command -v", which
behaves different with multiple arguments, this HOSTCC_NOCCACHE
redefinition problem surfaced. Even though
ca6a2907c2 has since then been reverted
for other reasons, it does make sense to guard the definition of
HOSTCC_NOCCACHE and HOSTCXX_NOCCACHE to not rely on a side-effect of
using "which".
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c5912e7db3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add patch to fix linking failure while creating shared library. As
explained in the patch itself, there is no specific variable for when we
link a shared library and rebar itself rely on the default LDFLAGS. Since
by default every CFLAGS is filled with -fPIC we need to make sure that
every LDFLAGS is the same, so not having any other *_LDFLAGS variable to
fille with -fPIC let's add it to the main LDFLAGS.
Fixes:
http://autobuild.buildroot.net/results/602/60296a48210e7ffc6bc9fa50ee586441a8957e85/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit b00c034fe5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following musl build failure raised since bump to version 6.14
in commit 5292d1cf9a:
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/i586-buildroot-linux-musl/9.3.0/../../../../i586-buildroot-linux-musl/bin/ld: rngd-rngd_jitter.o: in function `rngd_notime_start':
rngd_jitter.c:(.text+0xdc2): undefined reference to `pthread_attr_setaffinity_np'
Fixes:
- http://autobuild.buildroot.org/results/3ec7df86856aa9bee2f18a8faa44fd58bc8a6657
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit d94e2b6dd4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the gcc arc version was bumped to a version using gcc
10.x (arc-2020.09-release) in commit 0791abfba0 (toolchain: update ARC
tools to arc-2020.09-release), the select of BR2_GCC_VERSION_ARC on the
appropriate BR2_TOOLCHAIN_GCC_AT_LEAST_xyz was not updated.
Commit 0b4c7ba01c (toolchain: update option descriptions for ARC tools
arc-2020.09-release) fixed the prompt, but still forgot to update the
appropriate BR2_TOOLCHAIN_GCC_AT_LEAST_xyz.
This commit eventually fixes this issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 81662cf228)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As explained in the patch itself, there is a bug in the handling of
__pselect32() in glibc for the Microblaze architecture. There a
special Microblaze variant that was added to support kernels older
than < 3.15, but it "hides" a generic implementation that is needed to
support kernels newer than 3.15 but older than 5.1 (which is when the
time64 support for 32-bit architectures was added, making __pselect32
no longer needed).
This bug causes a glibc build failure for kernels >= 3.15 but < 5.1,
on Microblaze.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 17ebb6ffae)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When binutils 2.37 was introduced in commit
62f0232980 ("package/binutils: add
version 2.37"), the patch
0008-or1k-fix-pc-relative-relocation-against-dynamic-on-P.patch was
not properly updated. Indeed, between binutils 2.36 and 2.37, binutils
has switched to using the standard "bool" type, so instead of using
TRUE/FALSE, true/false must be used.
With this change, the binutils patch matches the one that was merged
upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit b032faa401)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Configuring coreutils with gl_cv_func_fstatat_zero_flag=no results in
non-functional lchmod library function which causes 'mkfifo -m' to
always complete with the message 'cannot set permissions of ...: Invalid
argument' and an error exit code. gl_cv_func_fstatat_zero_flag=no is not
needed when building coreutils-9.0 for linux and its setting should be
correctly determined by the configure script.
Drop gl_cv_func_fstatat_zero_flag=no from the coreutils configure
environment.
For more details see
https://lists.buildroot.org/pipermail/buildroot/2021-December/631388.html
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit fef5d9fbda)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
His e-mail address is bouncing (and we have some private information
that explains why):
Ryan Barnett (ryan.barnett@collins.com)<mailto:ryan.barnett@collins.com>
The recipient won't be able to receive this message because it's too large.
The maximum message size that's allowed is 1 KB. This message is 7 KB.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 287601459e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Cage requires wlroots to be built with X11 enabled
in order to enable XWayland, otherwise it will fail
with error:
"ERROR: Problem encountered: Cannot build Cage with
XWayland support: wlroots has been built without it"
Signed-off-by: Yunhao Tian <t123yh.xyz@gmail.com>
[yann.morin.1998@free.fr:
- drop explicit _XORG7, as _WLROOTS_X11 depends on it
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 3e4c2d6213)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
*) SECURITY: CVE-2021-44790: Possible buffer overflow when parsing
multipart content in mod_lua of Apache HTTP Server 2.4.51 and
earlier (cve.mitre.org)
A carefully crafted request body can cause a buffer overflow in
the mod_lua multipart parser (r:parsebody() called from Lua
scripts).
The Apache httpd team is not aware of an exploit for the
vulnerabilty though it might be possible to craft one.
This issue affects Apache HTTP Server 2.4.51 and earlier.
Credits: Chamal
*) SECURITY: CVE-2021-44224: Possible NULL dereference or SSRF in
forward proxy configurations in Apache HTTP Server 2.4.51 and
earlier (cve.mitre.org)
A crafted URI sent to httpd configured as a forward proxy
(ProxyRequests on) can cause a crash (NULL pointer dereference)
or, for configurations mixing forward and reverse proxy
declarations, can allow for requests to be directed to a
declared Unix Domain Socket endpoint (Server Side Request
Forgery).
This issue affects Apache HTTP Server 2.4.7 up to 2.4.51
(included).
For more details, see the changes file:
https://downloads.apache.org/httpd/CHANGES_2.4.52
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit bdc3f6888f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
janus-gateway is vulnerable to Improper Neutralization of Input During
Web Page Generation ('Cross-site Scripting')
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 2fd3c2cf43)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- A vulnerability (GHSL-2021-1038) in the HTML cleaner allowed sneaking
script content through SVG images (CVE-2021-43818).
- A vulnerability (GHSL-2021-1037) in the HTML cleaner allowed sneaking
script content through CSS imports and other crafted constructs
(CVE-2021-43818).
https://github.com/lxml/lxml/blob/lxml-4.6.5/CHANGES.txt
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit ad6321660c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Evan has privately requested to no longer receive e-mails related to
this Buildroot package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit acc0d51c53)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS dependency was wrongly added to
BR2_PACKAGE_HOST_IMAGEMAGICK by commit
df20e45463, indeed host-librsvg is only
needed by BR2_PACKAGE_HOST_IMAGEMAGICK_SVG
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 38f6b42d31)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2021-4048: An out-of-bounds read flaw was found in the CLARRV,
DLARRV, SLARRV, and ZLARRV functions in lapack through version 3.10.0,
as also used in OpenBLAS before version 0.3.18. Specially crafted inputs
passed to these functions could cause an application using lapack to
crash or possibly disclose portions of its memory.
It should be noted that commit 59a1fcc696
wrongly assumed that this CVE was fixed in version 3.10.0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 83134027a0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with glibc >= 2.34:
In file included from timerobj.c:32:
In function 'threadobj_set_current',
inlined from 'server_prologue' at timerobj.c:94:2:
../../include/copperplate/threadobj.h:252:9: error: 'pthread_setspecific' expecting 1 byte in a region of size 0 [-Werror=stringop-overread]
252 | pthread_setspecific(threadobj_tskey, thobj);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/ed93f916eda304b30f320816c85d1b0d4488c699
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 1b3055cc8d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current configuration fails to boot on the stm32f469-disco board.
Make it bootable again by reverting the DRAM patches.
Also change the kernel load address from 0x8010000 to 0x800C000 to
allocate more space to the kernel, since 32kB for the device tree is
enough.
Also clean up the rootfs a bit with the common stm32-post-build.sh
script.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Acked-by: Christophe Priouzeau <christophe.priouzeau@foss.st.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 82c1a43792)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
They are currently expressed as such:
depends on (BR2_ENABLE_LOCALE && BR2_USE_WCHAR)
which is not the common practice in Buildroot. We prefer to use:
depends on BR2_ENABLE_LOCALE
depends on BR2_USE_WCHAR
This commit ensures linux-pam is consistent with this best practice.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ac9261edec)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_PACKAGE_LINUX_PAM depends on BR2_USE_MMU, but this dependency is
not taken into account in the Config.in comment, which this commit
fixes.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 8f0df6609a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with help2man raised since bump to
version 1.26.0 in commit be76508af2:
FAILED: docs/man/mbimcli.1
/usr/bin/help2man --output=docs/man/mbimcli.1 '--name=Control MBIM devices' '--help-option="--help-all"' /home/peko/autobuild/instance-1/output-1/build/libmbim-1.26.0/build/src/mbimcli/mbimcli
help2man: can't get `"--help-all"' info from /home/peko/autobuild/instance-1/output-1/build/libmbim-1.26.0/build/src/mbimcli/mbimcli
Try `--no-discard-stderr' if option outputs to stderr
Fixes:
- http://autobuild.buildroot.org/results/eaa2ba54b9c74f07292d3cad4fa96c80e6079702
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit a315d7c98b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ICU build scripting adds some host libraries to LD_LIBRARY_PATH by
using constructs of the following form:
LD_LIBRARY_PATH="custom-path:${LD_LIBRARY_PATH}"
If the original LD_LIBRARY_PATH is empty, this causes the last search
directory be an empty string, i.e. the working directory.
ICU build runs some basic host commands (e.g. "rm") in $(TARGET_DIR)/lib
under such an LD_LIBRARY_PATH, causing target libraries (e.g. libc) to
possibly get loaded instead of host system libraries if they are
compatible enough (e.g. arch matches).
Since the target libraries may not actually be ABI compatible with host
system binaries (e.g. target has an old libc), this can cause crashes
or other errors.
Observed errors include:
(1) rm: libc.so.6: version `GLIBC_2.33' not found (required by rm)
(2) sh: line 1: 1362670 Segmentation fault (core dumped) rm -f libicudata.so.65
Workaround the issue by setting a dummy LD_LIBRARY_PATH when it would
otherwise be empty.
https://unicode-org.atlassian.net/browse/ICU-21417
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit ac1c781149)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised with help2man since bump to
version 1.30.0 in commit 50c5495f81:
FAILED: docs/man/qmicli.1
/usr/bin/help2man --output=docs/man/qmicli.1 '--name=Control QMI devices' '--help-option="--help-all"' /home/peko/autobuild/instance-1/output-1/build/libqmi-1.30.2/build/src/qmicli/qmicli
help2man: can't get `"--help-all"' info from /home/peko/autobuild/instance-1/output-1/build/libqmi-1.30.2/build/src/qmicli/qmicli
Try `--no-discard-stderr' if option outputs to stderr
Fixes:
- http://autobuild.buildroot.org/results/15818b6de7378cd75c59b1d6dc732ed9a20c092a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 7f38ce2103)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following vulnerabilities:
* CVE-2021-4008/ZDI-CAN-14192 SProcRenderCompositeGlyphs out-of-bounds
access
The handler for the CompositeGlyphs request of the Render extension does
not properly validate the request length leading to out of bounds memory
write.
* CVE-2021-4009/ZDI-CAN 14950 SProcXFixesCreatePointerBarrier out-of-bounds
access
The handler for the CreatePointerBarrier request of the XFixes extension
does not properly validate the request length leading to out of bounds
memory write.
* CVE-2021-4010/ZDI-CAN-14951 SProcScreenSaverSuspend out-of-bounds access
The handler for the Suspend request of the Screen Saver extension does not
properly validate the request length leading to out of bounds memory
write.
* CVE-2021-4011/ZDI-CAN-14952 SwapCreateRegister out-of-bounds access
The handlers for the RecordCreateContext and RecordRegisterClients
requests of the Record extension do not properly validate the request
length leading to out of bounds memory write.
For details, see the advisory:
https://lists.x.org/archives/xorg-announce/2021-December/003122.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition...
scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
Tested on beaglebone black and beaglebone white (A6)
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 7b55cb018d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Minor bugfix release:
Changes between 1.1.1l and 1.1.1m [14 Dec 2021]
*) Avoid loading of a dynamic engine twice.
[Bernd Edlinger]
*) Fixed building on Debian with kfreebsd kernels
[Mattias Ellert]
*) Prioritise DANE TLSA issuer certs over peer certs
[Viktor Dukhovni]
*) Fixed random API for MacOS prior to 10.12
These MacOS versions don't support the CommonCrypto APIs
[Lenny Primak]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 2b906b975a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- cgi_error_no_template(): Encode the template name to prevent
XSS (cross-site scripting) when Privoxy is configured to servce
the user-manual itself.
Commit 0e668e9409c. OVE-20211102-0001. CVE-2021-44543.
Reported by: Artem Ivanov
- get_url_spec_param(): Free memory of compiled pattern spec
before bailing.
Reported by Joshua Rogers (Opera) who also provided the fix.
Commit 652b4b7cb0. OVE-20211201-0003. CVE-2021-44540.
- process_encrypted_request_headers(): Free header memory when
failing to get the request destination.
Reported by Joshua Rogers (Opera) who also provided the fix.
Commit 0509c58045. OVE-20211201-0002. CVE-2021-44541.
- send_http_request(): Prevent memory leaks when handling errors
Reported by Joshua Rogers (Opera) who also provided the fix.
Commit c48d1d6d08. OVE-20211201-0001. CVE-2021-44542.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 44a97dcb93)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2021-44420: Potential bypass of an upstream access control based on
URL paths
HTTP requests for URLs with trailing newlines could bypass an upstream
access control based on URL paths.
This issue has low severity, according to the Django security policy.
https://www.djangoproject.com/weblog/2021/dec/07/security-releases/
In addition, 3.2.8 / 3.2.9 fixes a number of bugs.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 086d357dfb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
connman might depend on iptables or nftables, and those dependencies
are already selected later in this file as required.
Config.in already only selects iptables if BR2_PACKAGE_CONNMAN_IPTABLES.
Signed-off-by: Nuno Goncalves <nunojpg@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit edc46a56f6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop spurious "depends on WCHAR" added with commit
ccfc90e101 and adds missing wchar comment
While at it, drop BR2_USE_MMU from comment as it is already added by
BR2_PACKAGE_LIBVIRT_ARCH_SUPPORTS and fix indentation before
(BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_11 || !BR2_aarch64))
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 250e965803)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Beaglebone Black Wireless needs a specific DT, which u-boot tries to
load based on the board name. Make sure we ship the DT so that we can
boot on that platform.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 1984222c84)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
to monitor issues and changes.
Signed-off-by: Andreas Ziegler <br015@umbiko.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit f9ae224604)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Mutt 2.1.4 was released on December 11, 2021. This is a bug-fix release,
fixing a performance issue when used with DavMail.
Mutt 2.1.3 was released on September 10, 2021. This is a bug-fix
release, fixing some of the fixes in the last release. IMAP and
QRESYNC users are advised to upgrade.
Mutt 2.1.2 was released on August 24, 2021. This is an important bug-fix
release, fixing a potential data-loss IMAP bug, a couple QRESYNC bugs,
and a few other issues. IMAP users are strongly advised to upgrade.
http://www.mutt.orghttps://gitlab.com/muttmua/mutt/-/blob/mutt-2-1-4-rel/ChangeLog
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 7686a1382f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
<roman.gorbenkov@ens2m.org>: host mxd.relay.renater.fr[194.214.200.9] said: 550
5.5.0 Requested actions not taken as the mailbox is unavailable (in reply
to RCPT TO command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 656f4a3718)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go1.17.4 (released 2021-12-02) includes fixes to the compiler, linker, runtime,
and the go/types, net/http, and time packages.
go1.17.5 (released 2021-12-09) includes security fixes to the syscall and
net/http packages:
- CVE-2021-44716
- CVE-2021-44717
https://go.dev/doc/devel/release#go1.17
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit eb92bb01b3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The copy command for /usr/share/alsa missing an asterisk cause it to copy to
/usr/share/alsa/alsa instead of /usr/share/alsa where it should be.
Signed-off-by: Khoa Hoang <admin@khoahoang.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 6c71b52235)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In Keepalived through 2.2.4, the D-Bus policy does not sufficiently
restrict the message destination, allowing any user to inspect and
manipulate any property. This leads to access-control bypass in some
situations in which an unrelated D-Bus system service has a settable
(writable) property
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit e4464fabb6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some of the third party code is BSD-licensed. In addition, the roots.pem
certificate store is MPL-licensed.
This was probably already the case in earlier versions as well, but it
was only noticed while updating to 1.42.0 because the LICENSE file was
adapted for it.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 50c4fd9363)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is possible that some users of buildroot have put it in a repository
and call into it from another Makefile such as:
.DEFAULT:
$(MAKE) O=$(abspath $(O)) -C buildroot $(@)
This technique works well except that Make tells us that it changes into
the buildroot directory:
make[1]: Entering directory 'buildroot'
Because this line doesn't have an equals within it, python raises a
ValueError exception within pkg-stats.
This patch has python tell the invoked make not to print directories
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit c988867fd2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, by following the instructions in the manual and querying for
developers for a patch that changes path
package/foobar
the script reports both developers that have these entries in the
DEVELOPERS file:
F: package/foo/
F: package/foobar/
Starting from commit "afc112b0e4 utils/getdeveloperlib.py: fix issue
with hasfile()" get-developers script uses os.path.abspath() and
os.path.relpath().
The catch is that those functions return the absolute path and the
relative path without the trailing slash.
When the paths associated to a developer are then compared to the paths
a patch touches, using the string.startswith(), any substring returns
True, leading to developers for package/foo/ being wrongly reported
for package/foobar/ .
Fix this by re-adding the trailing slash after using relpath().
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Heiko Thiery <heiko.thiery@gmail.com>
Cc: James Knight <james.d.knight@live.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 29bb478a49)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2021-43784: runc is a CLI tool for spawning and running
containers on Linux according to the OCI specification. In runc, netlink
is used internally as a serialization system for specifying the relevant
container configuration to the `C` portion of the code (responsible for
the based namespace setup of containers). In all versions of runc prior
to 1.0.3, the encoder did not handle the possibility of an integer
overflow in the 16-bit length field for the byte array attribute type,
meaning that a large enough malicious byte array attribute could result
in the length overflowing and the attribute contents being parsed as
netlink messages for container configuration. This vulnerability
requires the attacker to have some control over the configuration of the
container and would allow the attacker to bypass the namespace
restrictions of the container by simply adding their own netlink payload
which disables all namespaces. The main users impacted are those who
allow untrusted images with untrusted configurations to run on their
machines (such as with shared cloud infrastructure). runc version 1.0.3
contains a fix for this bug. As a workaround, one may try disallowing
untrusted namespace paths from your container. It should be noted that
untrusted namespace paths would allow the attacker to disable namespace
protections entirely even in the absence of this bug.
https://github.com/opencontainers/runc/releases/tag/v1.0.3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 0acaad1be2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently this .mk snippet results in unexpected behavior from
check-package:
|VAR_1 = VALUE1
|ifeq (condition)
|VAR_1 := $(VAR_1), VALUE2
|endif
Fix commit "163f160a8e utils/{check-package, checkpackagelib}:
consistently use raw strings for re.compile" that ended up doing this:
- CONCATENATING = re.compile("^([A-Z0-9_]+)\s*(\+|:|)=\s*\$\(\\1\)")
+ CONCATENATING = re.compile(r"^([A-Z0-9_]+)\s*(\+|:|)=\s*\$\(\\1\)")
But raw strings do not expect escaping when referencing \1 and the
pattern ends up searching for a raw '\\1' instead of an occurrence of
the first pattern inside parenthesis.
|$ python3
|Python 3.8.10 (default, Sep 28 2021, 16:10:42)
|[GCC 9.3.0] on linux
|Type "help", "copyright", "credits" or "license" for more information.
|>>> import re
|>>> p1 = re.compile('(foo)bar\\1')
|>>> p2 = re.compile(r'(foo)bar\\1')
|>>> p3 = re.compile(r'(foo)bar\1')
|>>> s1 = 'foobarfoo'
|>>> s2 = 'foobar\\1'
|>>> print(p1.search(s1))
|<re.Match object; span=(0, 9), match='foobarfoo'>
|>>> print(p2.search(s1))
|None
|>>> print(p3.search(s1))
|<re.Match object; span=(0, 9), match='foobarfoo'>
|>>> print(p1.search(s2))
|None
|>>> print(p2.search(s2))
|<re.Match object; span=(0, 8), match='foobar\\1'>
|>>> print(p3.search(s2))
|None
|>>>
So use '\1' instead of '\\1' in the raw string.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 5bbedea9c2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As stated on www.pcre.org:
You can download the current release of the PCRE2 library from its
official home on GitHub
[...]
Note that the former ftp.pcre.org FTP site is no longer available.
Update _SITE URL to the official home on Github.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[yann.morin.1998@free.fr: use Github, not SourceForge]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit cc570eff96)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The following are runtime dependencies for host-python-requests:
host-python-certifi
host-python-charset-normalizer
host-python-idna
host-python-urllib3
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit b48d10f40a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A host variant of the python-urllib3 package will be needed for the
host-python-requests package.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit dccfefafd4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A host variant of the python-idna package will be needed for the
host-python-requests package.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 7c4a52e087)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A host variant of the python-charset-normalizer package will be needed
for the host-python-requests package.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 07fc2fb1a5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The message attribute does not exist in python3, see PEP-0352:
https://www.python.org/dev/peps/pep-0352/
Fixes:
Traceback (most recent call last):
File "utils/scanpypi", line 743, in <module>
main()
File "utils/scanpypi", line 693, in main
if 'buildutils' in err.message:
AttributeError: 'ImportError' object has no attribute 'message'
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit c3029878c5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2021-4048: An out-of-bounds read flaw was found in the CLARRV,
DLARRV, SLARRV, and ZLARRV functions in lapack through version 3.10.0,
as also used in OpenBLAS before version 0.3.18. Specially crafted
inputs passed to these functions could cause an application using
lapack to crash or possibly disclose portions of its memory.
- Drop first and second patches (already in version)
https://github.com/xianyi/OpenBLAS/blob/v0.3.18/Changelog.txt
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This bump is mainly to fix the header file nameclash problem with LiTE,
in package/lite. See the libite project's README for how to adapt to
this change, and the ChangeLog for details. In short, libite now use
the /usr/include/libite/*.h prefix.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This addresses the autobuilder failure for master as per 2021-11-27.
The root cause was a name clash in a dependency, the libite library,
clashing with the DirectFB LiTE library header files. Hence, this
update alone does not fix [1], libite also needs to be updated. To
provide a smooth transition though, watchdogd should be updated first.
[1]: http://autobuild.buildroot.net/results/185c753af2aa159b494b13f78b0826dddbe4aed6
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Do the same as commit "12c01079bd package/stress-ng: bump to version
0.13.05" did for 2022.02 but without the version bump.
The project URL returns 404 error because:
Quoting Coling King:
"Unfortunately when I left Canonical last week they removed my tarballs"
So use github and update hash.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Ricardo: do not bump the version.
There will be no version clash at sources.buildroot.net since the file
format changed]
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.com.br>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We define _DEFAULT_SOURCE in mkpasswd.c to suppress a compiler warning.
In file included from /usr/include/x86_64-linux-gnu/bits/libc-header-start.h:33,
from /usr/include/stdio.h:27,
from [...]/buildroot/output/arm64/build/host-mkpasswd/mkpasswd.c:24:
/usr/include/features.h:187:3:
187 | # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE"
| ^~~~~~~
As per GLIBC 2.20 release notes[1]:
The _BSD_SOURCE and _SVID_SOURCE feature test macros are no longer
supported; they now act the same as _DEFAULT_SOURCE (but generate a
warning). Except for cases where _BSD_SOURCE enabled BSD interfaces
that conflicted with POSIX (support for which was removed in 2.19),
the interfaces those macros enabled remain available when compiling
with _GNU_SOURCE defined, with _DEFAULT_SOURCE defined, or without
any feature test macros defined.
[1] https://lwn.net/Articles/611162/
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes:
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition of `yylloc';
scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Commit 82d1e8c628 (boot/grub2: use none platform when building for
host) changed host-grub2 to only install the tools, not the actual
bootloader or its modules, as they are of no use on the host.
It so happened that, when not instructed to built for a specific
platform, the grub2 buildsystem would default to build the legacy bios
platform (at least when the build happens on an x86 or x86_64 host).
However, because the host is more often than not an x86 or x86_64, when
the target was also an x68 or x86_64, the modules built for the host
could be re-used for the target, and this is what was done for our
pc_x86_64_bios_defconfig.
But now that we explicitly tell the grub2 buildsystem to not build any
platform when we build host-grub2, we no longer have access to the grub2
modules from the host directory, and the build fails when assembling the
final image.
We fix that in two ways:
First, we ensure that individual modules from the target grub2 get installed
in target/; we can only do that if the target grub2 tools are also
installed, so we enable that in the configuration.
Second, we fix the post-build script to look in target/ rather than in
host/.
All that, just for the 512-byte boot.img bootstrap, which pulls in all
the other modules (4.3MiB), the tools (8.8MiB)... But we are not going
to cherry-pick individual modules; this is error prone and
unmaintainable...
Reported-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Köry Maincent <kory.maincent@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some last-minute changes were made when applying commits 7a68960b68
(boot/grub2/Config.in: add symbols to represent legacy and EFI boot) and
4d5b209384 (package/mender-grubenv: fix grub module checks), and the
renaming of the BR2_TARGET_GRUB_LEGACY was not fully propagated.
This caused the path to the boot files to always be interpreted as being
the EFI one, and never the legacy one. In practice, that was not causing
any build failure, because the path was passed at build-time to
mender-grubenv, that would use it as the location where to install its
files, and finally as the location where our image-isntall commands
would look for them.
Still this is incorrect because it would not match where grub2 would
eventually end up lookig for its files at runtime...
To avoid further issue, drop the conditional block dedicated to setting
the path to the boot files, drop the intermediate variable, and move
setting the environment variable down into the existing conditional
block.
We do drop the intermediate variable, because there is no longer any
genericity needed: the installation commands are already duplicated for
the two cases anyway.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Adam Duskett <aduskett@gmail.com>
Cc: Köry Maincent <kory.maincent@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 0cfa165948 (package/pkg-utils.mk: introduce "name" field in
show-info output) did what it said, but did so in the generic show-info
part, thus it was also added to filesystems (rootfs), the other kind of
entity that show-info reports on.
Only packages have a "name"; filesystems do not. Instead, they already
have an 'image_name'.
Move the 'name' field to the package-related part of show-info.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The unmatched escaped single-quote lies in the middle of a few
function calls, so they too must be fake-closed to properly fix
colour highlighting in some editors.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some packages install nothing in target nor staging, but install images
(like the kernel vmlinux, or a bootloader boot blob...)
If we want to appropriately account for the files installed by each
package, we also need to take images/ into account.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When calling 'printvars', the 'suitable-host-package' macro is printed
(a macro is just a variable like the others, after all, just with some
parameters). Because it is printed as a variable, it is missing its
parameters, but it still tries to evaluate the $(shell) construct.
This causes spurious warning:
make[1]: support/dependencies/check-host-.sh: Command not found
Only try and call the script if there is actually a tool to check for.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When calling 'printvars' on a just-configured tree, the output contains
many spurious warnings about pkg-config being not found:
make[1]: [...]/host/bin/pkg-config: Command not found
This is partly because a few packages call pkg-config at the time the
Makefile is parsed (really, right when make evaluates the recipe before
executing it).
It is customary, instead, to defer the call to pkg-config to the actual
shell running the recipe's commands, like all our other packages do.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, the build_dir field is reported relative to $(BASE_DIR), to
avoid leaking local paths.
However, BASE_DIR is not a directory that is very convenient: for
in-tree builds, it is $(CONFIG_DIR)/output/, while for out-of-tree
builds, it is $(CONFIG_DIR). This difference is purely an idiosyncracy
of how out-of-tree builds have been implemented in Buildroot, and is
not under the control of the user.
What the user is in control of, however, is where the .config file is
located. This, really, is the directory we should base relative paths
on.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit b68810e70c (boot/grub2: add support to build multiple Grub2
configurations in the same build) broke mender-grubenv by splititng up
BR2_TARGET_GRUB2_BUILTIN_MODULES into two separate symbols, one for
legacy boot and one for EFI boot.
This change causes a systematic build failure now, as the legacy variable
BR2_TARGET_GRUB2_BUILTIN_MODULES is now always empty (during build).
We fix that by supplicating the missing modules to check: one for EFI and
one for legacy boot.
The EFI check is tricky: Indeed, there can be more than one EFI platform
enabled simultaneously; indeed, on x86_64, we can have both the 32-bit
and 64-bit EFI platforms enabled. So the check is inverted, and we check
that no platform is not enabled (yeah, double negation). For consistency,
we do the same for the legacy boot, even though in that case, there can
only ever be only one enabled at once at most.
Furthermore, mender-grubenv does not support multiple installations of
grub concurrently; it can only be installed for either legacy or EFI,
not both at the same time: /etc/mender-grubenv.cfg, its configuration
file, can only contain settings for one or the other, not both.
So we add a new check to Config.in to support only one grub installation
type at a time.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr:
- drop superfluous check on empty modules lists
- move EFI and legacy commands under same condition as checks
- variables were renamed
- misc eye-candy
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Köry Maincent <kory.maincent@bootlin.com>
The help was missing the regexp module.
The variable assignment was missing spaces around the equal sign.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr: split to its own patch, fix assignment too]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Köry Maincent <kory.maincent@bootlin.com>
There are cases to want a synthetic information whether the legacy BIOS
or U-Boot boot scheme, or the EFI boot scheme, are enabled, without
resorting to testing all and each platforms.
This is already the cae in grub2 itself, for the configuration of the
BIOS/U-Boot boot partition, and builtin modules and configuration on one
hand, and the EFI builtin modules and configuraiton on the other hand.
It is also the case for mender-grubenv, which will want to know if
either or both are enabled, but without having to resort to testing all
the cases.
Add two new symbols, that each represent those conditions:
* BR2_TARGET_GRUB2_HAS_LEGACY_BOOT
* BR2_TARGET_GRUB2_HAS_EFI_BOOT
Each target selects the appropriate bool, which makes it much more
simple for other packages such as mender-grubenv to check if grub legacy
or EFI is selected.
And of course, we also make use of those symbols in grub2 itself, to
simplify the conditions for showing.hiding legacy and EFI options.
Additionally (but that does not merit being in its own patch), add a
comment on the closing 'endif' for the EFI part.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr:
- s/BR2_TARGET_GRUB_/BR2_TARGET_GRUB2_/
- rename variables anyway
- use variables in grub2 itself
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Köry Maincent <kory.maincent@bootlin.com>
Fix CVE-2021-4020: janus-gateway is vulnerable to Improper
Neutralization of Input During Web Page Generation ('Cross-site
Scripting')
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As already done for libglib2 in commit
b094f88a4d, fix girdir to avoid the
following build failure with gst1-plugins-base and introspection:
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/riscv32-buildroot-linux-gnu/sysroot/usr/bin/g-ir-compiler gst-libs/gst/tag/GstTag-1.0.gir --output gst-libs/gst/tag/GstTag-1.0.typelib --includedir=/usr/share/gir-1.0
Could not find GIR file 'Gst-1.0.gir'; check XDG_DATA_DIRS or use --includedir
Fixes:
- http://autobuild.buildroot.org/results/d1e2bdde97777ff61c185d375ba412a93e7ca467
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2021-30535: Double free in ICU in Google Chrome prior to
91.0.4472.77 allowed a remote attacker to potentially exploit heap
corruption via a crafted HTML page.
https://nvd.nist.gov/vuln/detail/CVE-2021-30535
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
xz compresses better than bzip2, and is (getting) more popular, so build
release tarballs as .tar.xz (in addition to .tar.gz) instead of .tar.bz2,
similar to how the kernel did ~8 years ago:
https://www.kernel.org/happy-new-year-and-good-bye-bzip2.html
-rw-r--r-- 1 peko peko 5,1M Dec 2 17:55 buildroot-2021.11-rc3.tar.xz
-rw-r--r-- 1 peko peko 5,7M Nov 30 18:15 buildroot-2021.11-rc3.tar.bz2
-rw-r--r-- 1 peko peko 6,8M Nov 30 18:15 buildroot-2021.11-rc3.tar.gz
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with uclibc < 1.0.35 raised since bump
to version 3.8 in commit 1f89c80417:
In file included from ./sys/random.h:40,
from getrandom.c:22:
/home/giuliobenetti/autobuild/run/instance-0/output-1/host/x86_64-buildroot-linux-uclibc/sysroot/usr/include/sys/random.h:27:35: error: unknown type name 'size_t'
27 | extern int getrandom(void *__buf, size_t count, unsigned int flags)
| ^~~~~~
/home/giuliobenetti/autobuild/run/instance-0/output-1/host/x86_64-buildroot-linux-uclibc/sysroot/usr/include/sys/random.h:8:1: note: 'size_t' is defined in header '<stddef.h>'; did you forget to '#include <stddef.h>'?
7 | #include <features.h>
+++ |+#include <stddef.h>
8 |
Fixes:
- http://autobuild.buildroot.org/results/adecc3e5def140348dfff30961fe6514c9a8e7b5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Don't install compile_et as it raises the following build failure with
samba4 since, at least, bump to version 4.14.7 in commit
630e85f8f5:
source4/heimdal/lib/asn1/asn1_err.c:47:23: error: 'link' redeclared as different kind of symbol
47 | static struct et_list link = { 0, 0 };
| ^~~~
In file included from /home/giuliobenetti/autobuild/run/instance-1/output-1/host/s390x-buildroot-linux-gnu/sysroot/usr/include/bits/sigstksz.h:24,
from /home/giuliobenetti/autobuild/run/instance-1/output-1/host/s390x-buildroot-linux-gnu/sysroot/usr/include/signal.h:328,
from /home/giuliobenetti/autobuild/run/instance-1/output-1/host/s390x-buildroot-linux-gnu/sysroot/usr/include/sys/param.h:28,
from ../../lib/replace/../replace/replace.h:659,
from ../../source4/heimdal_build/config.h:10,
from source4/heimdal/lib/asn1/asn1_err.c:1:
/home/giuliobenetti/autobuild/run/instance-1/output-1/host/s390x-buildroot-linux-gnu/sysroot/usr/include/unistd.h:819:12: note: previous declaration of 'link' was here
819 | extern int link (const char *__from, const char *__to)
| ^~~~
Fixes:
- http://autobuild.buildroot.org/results/d6de6ed59c553f6f413d280f3c65184945bb3850
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use single space in LIBFOO_{DEVICES,PERMISSIONS} to be consistent with
LIBFOO_USERS, package/makedevs/README and most examples/packages
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This fixes build on an ARM64 host (and I assume also
other non-x86).
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update fourth patch to add girdir in gio-2.0.pc. This will fix the
following build failure with libnice raised since commit
aade2fd293:
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/riscv32-buildroot-linux-gnu/sysroot/usr/bin/g-ir-compiler nice/Nice-0.1.gir --output nice/Nice-0.1.typelib --includedir=/usr/share/gir-1.0
Could not find GIR file 'GObject-2.0.gir'; check XDG_DATA_DIRS or use --includedir
Fixes:
- http://autobuild.buildroot.org/results/3088ef32b03e0bb984291b1227b187f1ff816eb7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2021-3973: vim is vulnerable to Heap-based Buffer Overflow
- Fix CVE-2021-3974: vim is vulnerable to Use After Free
- Fix CVE-2021-3968: vim is vulnerable to Heap-based Buffer Overflow
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that our pipelines are using the Docker image from the Gitlab
registry, there is no longer any reason to push the image to the
Docker hub.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On a properly setup machine, it is totally useless to use sudo to run
docker; it is very bad practice. Instead, users really should add
themselves to the docker group.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In Pure-FTPd 1.0.49, an incorrect max_filesize quota mechanism in the
server allows attackers to upload files of unbounded size, which may
lead to denial of service or a server hang. This occurs because a
certain greater-than-zero test does not anticipate an initial -1 value.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
* In some situations the X.509 verifier would discard an error on an
unverified certificate chain, resulting in an authentication bypass.
Thanks to Ilya Shipitsin and Timo Steinlein for reporting.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
GNU Multiple Precision Arithmetic Library (GMP) through 6.2.1 has an
mpz/inp_raw.c integer overflow and resultant buffer overflow via crafted
input, leading to a segmentation fault on 32-bit platforms.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since the addition of
introspection in commit 3915e17e77:
/home/giuliobenetti/autobuild/run/instance-1/output-1/host/bin/../riscv32-buildroot-linux-gnu/sysroot/usr/bin/g-ir-compiler -l `/usr/bin/sed -nE "s/^dlname='([A-Za-z0-9.+-]+)'/\1/p" libgee-0.8.la` -o Gee-0.8.typelib Gee-0.8.gir libgee-0.8.la
Could not find GIR file 'GObject-2.0.gir'; check XDG_DATA_DIRS or use --includedir
error parsing file Gee-0.8.gir: Failed to parse included gir GObject-2.0
Fixes:
- http://autobuild.buildroot.org/results/884faa0f84c8dc43ed1ca6cde9caf21c731a4b35
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since upstream commit bb1d35dc1767 [1] (which is part of the bump to
version 1.4.60), configure.ac no longer checks for a specific C
standard. It will therefore use the "default" standard. With autoconf
2.69 (which is what is used to generate the configure script in the
tarball), the default standard is C89, which requires no option to be
passed to the compiler. However, that means that older compilers, e.g.
GCC 4.8, will indeed use C89 and not C99. This leads to the following
error.
array.c:140:2: error: 'for' loop initial declarations are only allowed in C99 mode
for (uint32_t i = 0; i < sz; ++i) {
^
In autoconf 2.71 (which is used by Buildroot), the default standard has
changed: it is now C11 if available, C99 failing that, and finally fall
back to C89. Since GCC 4.8 (and later) support C11, that's what will be
selected, so C99 is allowed as well. Thus, running autoreconf fixes the
build.
The issue was reported upstream [2].
Fixes:
- http://autobuild.buildroot.org/results/0349d8fed35b0766796dd9ba3b8de6ff8bd68fe7
[1] https://redmine.lighttpd.net/projects/lighttpd/repository/14/revisions/bb1d35dc17671bc308e25651b4f5fa0c3008cc69
[2] https://redmine.lighttpd.net/issues/3116
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Starting with uboot 2021.10, with upstream commit 473fc279c89 (kconfig /
kbuild: Re-sync with Linux 4.20), the kconfig in uboot now needs the
compiler to detect its features.
Like was done for linux in 3fc990a798 (linux: kconfig needs the
toolchain) and barebox in 1c1a629d81 (boot/barebox: kconfig needs the
toolchain), add the toolchain to the kconfig dependencies of uboot.
Reported-by: Davian on IRC
Reported-by: Xogium on IRC
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As stated on www.pcre.org:
"Note that the former ftp.pcre.org FTP site is no longer available."
Update _SITE URL to Sourceforge.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2021-11-19 17:03:36 +01:00
418 changed files with 4118 additions and 1528 deletions
ld: otp/lib/erl_interface/obj/x86_64-unknown-linux-gnu/libei.a(eirecv.o):otp/lib/erl_interface/src/misc/ei_portio.h:50: multiple definition of `ei_default_socket_callbacks'; otp/lib/erl_interface/obj/x86_64-unknown-linux-gnu/libei.a(ei_connect.o):otp/lib/erl_interface/src/misc/ei_portio.h:50: first defined here
ld: otp/lib/erl_interface/obj/x86_64-unknown-linux-gnu/libei.a(send.o):otp/lib/erl_interface/src/misc/ei_portio.h:50: multiple definition of `ei_default_socket_callbacks'; otp/lib/erl_interface/obj/x86_64-unknown-linux-gnu/libei.a(ei_connect.o):otp/lib/erl_interface/src/misc/ei_portio.h:50: first defined here
ld: otp/lib/erl_interface/obj/x86_64-unknown-linux-gnu/libei.a(send_reg.o):otp/lib/erl_interface/src/misc/ei_portio.h:50: multiple definition of `ei_default_socket_callbacks'; otp/lib/erl_interface/obj/x86_64-unknown-linux-gnu/libei.a(ei_connect.o):otp/lib/erl_interface/src/misc/ei_portio.h:50: first defined here
ld: otp/lib/erl_interface/obj/x86_64-unknown-linux-gnu/libei.a(epmd_port.o):otp/lib/erl_interface/src/misc/ei_portio.h:50: multiple definition of `ei_default_socket_callbacks'; otp/lib/erl_interface/obj/x86_64-unknown-linux-gnu/libei.a(ei_connect.o):otp/lib/erl_interface/src/misc/ei_portio.h:50: first defined here
ld: otp/lib/erl_interface/obj/x86_64-unknown-linux-gnu/libei.a(ei_portio.o):otp/lib/erl_interface/src/misc/ei_portio.h:50: multiple definition of `ei_default_socket_callbacks'; otp/lib/erl_interface/obj/x86_64-unknown-linux-gnu/libei.a(ei_connect.o):otp/lib/erl_interface/src/misc/ei_portio.h:50: first defined here
/home/buildroot/autobuild/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/i586-buildroot-linux-musl/9.3.0/../../../../i586-buildroot-linux-musl/bin/ld: gdbsupport/tdesc-ipa.o: in function `print_xml_feature::visit(tdesc_type_builtin const*)':
/home/buildroot/autobuild/instance-2/output-1/build/gdb-10.2/build/gdbserver/../../gdbserver/../gdbsupport/tdesc.cc:310: undefined reference to `libintl_gettext'
/home/buildroot/autobuild/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/i586-buildroot-linux-musl/9.3.0/../../../../i586-buildroot-linux-musl/bin/ld: gdbsupport/tdesc-ipa.o: in function `print_xml_feature::visit(tdesc_type_builtin const*)':
/home/buildroot/autobuild/instance-2/output-1/build/gdb-10.2/build/gdbserver/../../gdbserver/../gdbsupport/tdesc.cc:310: undefined reference to `libintl_gettext'
In commit a92f4e6299fe0e3cb6f77e79de00817aece501ce ("linux: Add time64
pselect support"), a Microblaze specific implementation of
__pselect32() was added to cover the case of kernels < 3.15 which lack
the pselect6 system call.
This new file sysdeps/unix/sysv/linux/microblaze/pselect32.c takes
precedence over the default implementation
sysdeps/unix/sysv/linux/pselect32.c.
However sysdeps/unix/sysv/linux/pselect32.c provides an implementation
of __pselect32() which is needed when __ASSUME_TIME64_SYSCALLS is not
defined. On Microblaze, which is a 32-bit architecture,
__ASSUME_TIME64_SYSCALLS is only true for kernels >= 5.1.
Due to sysdeps/unix/sysv/linux/microblaze/pselect32.c taking
precedence over sysdeps/unix/sysv/linux/pselect32.c, it means that
when we are with a kernel >= 3.15 but < 5.1, we need a __pselect32()
implementation, but sysdeps/unix/sysv/linux/microblaze/pselect32.c
doesn't provide it, and sysdeps/unix/sysv/linux/pselect32.c which
would provide it is not compiled in.
This causes the following build failure on Microblaze with for example
Linux kernel headers 4.9:
/home/thomas/buildroot/buildroot/output/host/lib/gcc/microblazeel-buildroot-linux-gnu/10.3.0/../../../../microblazeel-buildroot-linux-gnu/bin/ld: /home/thomas/buildroot/buildroot/output/build/glibc-2.34-9-g9acab0bba6a5a57323b1f94bf95b21618a9e5aa4/build/libc_pic.os: in function `__pselect64':
(.text+0x120b44): undefined reference to `__pselect32'
collect2: error: ld returned 1 exit status
To fix this, we take a crude approach: replicate in
sysdeps/unix/sysv/linux/microblaze/pselect32.c the
!__ASSUME_TIME64_SYSCALLS implementation that is already in
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Peter Korsgaard