We are currently using the fork by Adam, with support for duktape as a
JS engine. But upstream has finally merged that just a day ago. Woohoo!
Between the fork we were using and upstream, there are very little
changes, mostly centered around:
- translations
- buildsystem
- duktape
- CVE-2021-4034
So, we just switch to using the HEAD of the repo: it has not much more
than the two important changes: duktape and the CVE fix.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Marek Belisko <marek.belisko@open-nandra.com>
Cc: Adam Duskett <aduskett@gmail.com>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 4aecb964af)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is needed for polkit to work with SELinux.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit b89163a067)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Drop upstreamed patches
- change the location of polkit.its and polkit.loc to match their
new locations.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 079528bb9c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2021-20330: An attacker with basic CRUD permissions on a
replicated collection can run the applyOps command with specially
malformed oplog entries, resulting in a potential denial of service on
secondaries. This issue affects MongoDB Server v4.0 versions prior to
4.0.25; MongoDB Server v4.2 versions prior to 4.2.14; MongoDB Server
v4.4 versions prior to 4.4.6.
Drop third patch (already in version)
https://docs.mongodb.com/master/release-notes/4.2/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 49bbf644d4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CVE-2021-43816: "Unprivileged pod using `hostPath` can side-step active LSM when
it is SELinux"
Containers launched through containerd’s CRI implementation on Linux systems
which use the SELinux security module and containerd versions since v1.5.0 can
cause arbitrary files and directories on the host to be relabeled to match the
container process label through the use of specially-configured bind mounts in a
hostPath volume. This relabeling elevates permissions for the container,
granting full read/write access over the affected files and directories.
Kubernetes and crictl can both be configured to use containerd’s CRI
implementation.
https://github.com/advisories/GHSA-mvff-h3cj-wj9chttps://github.com/containerd/containerd/releases/tag/v1.5.9
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 935bd589a3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
pjsip:pjsip has been deprecated by teluu:pjsip since September 2021:
<cpe-23:cpe23-item name="cpe:2.3:a:pjsip:pjsip:2.7.1:*:*:*:*:*:*:*">
<cpe-23:deprecated-by name="cpe:2.3:a:teluu:pjsip:2.7.1:*:*:*:*:*:*:*" type="NAME_CORRECTION"/>
<cpe-item name="cpe:/a:pjsip:pjsip:2.7.2" deprecated="true" deprecation_date="2021-09-02T14:49:19.527Z">
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c99d84fb96)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changelog (since 1.1.7):
8b70f08 Add definition of new event GstAppSinkCallbacks for interpipesink element
ddaa9b5 Add conditional build according to GST_VERSION_MINOR
730dea6 Bump project version
8718b12 Add initialization for the GstAppSinkCallbacks struct
f015ff7 Remove redundant initialization of new_event callback
530da92 Update copyright year in README file
e8ce826 Add explanatory comment on the memset of GstAppSinkCallbacks struct
f0f3b8e Fix README copyright date to 2016-2022
814982e Merge branch 'hotfix/add-new-event-callback'
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 0872ac72b7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
TinyXML through 2.6.2 has an infinite loop in TiXmlParsingData::Stamp in
tinyxmlparser.cpp via the TIXML_UTF_LEAD_0 case. It can be triggered by
a crafted XML message and leads to a denial of service.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b23ef21029)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
5.15.2 is the last public release of 5.15 and does not contain this CVE
fix. However, >=6.1.2 and >5.12.12 all contain the necessary patches so
let's port them to 5.15.2.
Technically only the first two patches are required to patch the CVE.
However, the second patch introduces a regression that is fixed in the third
patch.
The patches are taken from KDE kde/5.15 git branch.
Cc: Quentin Schulz <foss+buildroot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 9151eab3c7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr: also change in Config.in]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit f6297befe1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
Improper handling of URI Subject Alternative Names (Medium)(CVE-2021-44531)
Accepting arbitrary Subject Alternative Name (SAN) types, unless a PKI is
specifically defined to use a particular SAN type, can result in bypassing
name-constrained intermediates. Node.js was accepting URI SAN types, which
PKIs are often not defined to use. Additionally, when a protocol allows URI
SANs, Node.js did not match the URI correctly.
Certificate Verification Bypass via String Injection (Medium)(CVE-2021-44532)
Node.js converts SANs (Subject Alternative Names) to a string format. It
uses this string to check peer certificates against hostnames when
validating connections. The string format was subject to an injection
vulnerability when name constraints were used within a certificate chain,
allowing the bypass of these name constraints.
Incorrect handling of certificate subject and issuer fields (Medium)(CVE-2021-44533)
Node.js did not handle multi-value Relative Distinguished Names correctly.
Attackers could craft certificate subjects containing a single-value
Relative Distinguished Name that would be interpreted as a multi-value
Relative Distinguished Name, for example, in order to inject a Common Name
that would allow bypassing the certificate subject verification.
Prototype pollution via console.table properties (Low)(CVE-2022-21824)
Due to the formatting logic of the console.table() function it was not safe
to allow user controlled input to be passed to the properties parameter
while simultaneously passing a plain object with at least one property as
the first parameter, which could be __proto__. The prototype pollution has
very limited control, in that it only allows an empty string to be assigned
numerical keys of the object prototype.
For details, see the advisory:
https://nodejs.org/en/blog/vulnerability/jan-2022-security-releases/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 9096036f00)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Ghostscript GhostPDL 9.50 through 9.54.0 has a heap-based buffer
overflow in sampled_data_finish (called from sampled_data_continue and
interp).
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit c817641331)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Ghostscript GhostPDL 9.50 through 9.53.3 has a use-after-free in
sampled_data_sample (called from sampled_data_continue and interp).
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 70910c4092)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2020-13867: Open-iSCSI targetcli-fb through 2.1.52 has weak
permissions for /etc/target (and for the backup directory and backup
files).
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 488f92a1c3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2021-4192: vim is vulnerable to Use After Free
Fix CVE-2021-4193: vim is vulnerable to Out-of-bounds Read
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 33a3f1f30d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The commit 2f50686401 added a patch for
util-linux, but forgot to create a symlink to util-linux-libs. This
results in inconsistent libblkid.so builds from util-linux and
util-linux-libs.
If you enable BR2_PER_PACKAGE_DIRECTORIES, you will find that different
libblkid.so is used in different
$(BASE_DIR)/per-package/$(PKG)_NAME/target.
Signed-off-by: TIAN Yuanhao <tianyuanhao3@163.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 93d23ef91f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with introspection:
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/riscv32-buildroot-linux-gnu/sysroot/usr/bin/g-ir-compiler gst/rtsp-server/GstRtspServer-1.0.gir --output gst/rtsp-server/GstRtspServer-1.0.typelib --includedir=/usr/share/gir-1.0
Could not find GIR file 'Gst-1.0.gir'; check XDG_DATA_DIRS or use --includedir
error parsing file gst/rtsp-server/GstRtspServer-1.0.gir: Failed to parse included gir Gst-1.0
If the above error message is about missing .so libraries, then setting up GIR_EXTRA_LIBS_PATH in the .mk file should help.
Typically like this: PKG_MAKE_ENV += GIR_EXTRA_LIBS_PATH="$(@D)/.libs"
Fixes:
- http://autobuild.buildroot.org/results/04af6b22cfa0cffb6a3109a3b32b27137ad2e0b0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit fa3e7a63b9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
He has privately requested to no longer be notified regarding this
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit f51be73f25)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 4dff1be05e (package/libvirt: libvirtd needs C++ for nmap-ncat)
introduce a recursive dependency (really: a circular dependency):
package/busybox/Config.in:33:error: recursive dependency detected!
package/busybox/Config.in:33: symbol BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is selected by BR2_PACKAGE_EBTABLES_UTILS_SAVE
package/ebtables/Config.in:11: symbol BR2_PACKAGE_EBTABLES_UTILS_SAVE depends on BR2_PACKAGE_EBTABLES
package/ebtables/Config.in:1: symbol BR2_PACKAGE_EBTABLES is selected by BR2_PACKAGE_LIBVIRT_DAEMON
package/libvirt/Config.in:44: symbol BR2_PACKAGE_LIBVIRT_DAEMON depends on BR2_PACKAGE_NETCAT_OPENBSD
package/netcat-openbsd/Config.in:1: symbol BR2_PACKAGE_NETCAT_OPENBSD depends on BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
As usual with this kind of circular depednency, it is not trivial to see
what the real cuplrit is, or where to cut the circle.
A simple solution in this case is to drop the C++ dependency, and switch
the netcat-openbsd and nmap-ncat dependencies conditions.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit f81242ae4f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised since commit
fbf25acfbf:
WARNING: unmet direct dependencies detected for BR2_PACKAGE_NMAP
Depends on [n]: BR2_INSTALL_LIBSTDCPP [=n] && BR2_USE_MMU [=y] && BR2_TOOLCHAIN_HAS_THREADS [=y]
Selected by [y]:
- BR2_PACKAGE_LIBVIRT_DAEMON [=y] && BR2_PACKAGE_LIBVIRT [=y] && !BR2_PACKAGE_NETCAT_OPENBSD [=n]
Fixes:
- No autobuilder failures (yet)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: C++ only needed without NETCAT_OPENBSD]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 4dff1be05e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
sasl depends on libsasl2 (https://github.com/cyrusimap/cyrus-sasl) which
is not packaged yet in buildroot and will result in the following build
failure raised since commit fbf25acfbf:
output/build/libvirt-7.7.0/meson.build:1212:2: ERROR: Dependency "libsasl2" not found, tried pkgconfig
Fixes:
- No autobuilder failures (yet)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit ba2016dc04)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
support/scripts/pkg-stats:1171:8: E713 test for membership should be 'not in'
support/scripts/pkg-stats:1175:8: E713 test for membership should be 'not in'
support/scripts/pkg-stats:1179:8: E713 test for membership should be 'not in'
3 E713 test for membership should be 'not in'
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/1955772278
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 02e679d8bf)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When debugging pkg-stats, it's quite useful to be able to disable some
features that are quite long (checking upstream URL, checking latest
version, checking CVE). This commit adds a --disable option, which can
take a comma-separated list of features to disable, such as:
./support/scripts/pkg-stats --disable url,upstream
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b102352b62)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The .affects() method of the CVE class in support/scripts/cve.py can
return 3 values: CVE_AFFECTS, CVE_DOESNT_AFFECT and CVE_UNKNOWN.
We of course properly account for CVEs where .affects() return
CVE_AFFECTS, but the ones for which CVE_UNKNOWN is returned are
currently ignored, and therefore treated as if they did not affect the
package.
However CVE_UNKNOWN in fact indicates that the v_start/v_end fields of
the CPE entry could not be parsed by
distutils.version.LooseVersion(). Instead of ignoring such cases, this
commit adds support for the concept of "unsure CVEs", which will be
listed next to CVEs known to affect the package, so that we are aware
of them and can investigate the version issue.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a206bbc5fe)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
s/interperter/interpreter/ and drop 'use use' / 'depend on use'.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 65054d1a19)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
riscv64gc was made available for BR2_riscv, but RISC-V can be 32-bit
or 64-bit, so we need to restrict it to BR2_RISCV_64. There's no need
to keep the BR2_riscv dependency, as BR2_RISCV_64 can only be true
when BR2_riscv is true.
Also, BR2_PACKAGE_HOST_RUSTC_ARCH needs to be set to riscv64gc to
allow rust-bin to download its pre-compiled standard library
correctly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 79c5639597)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_PACKAGE_HOST_RUSTC_ARCH only had a special value for
BR2_ARM_CPU_ARMV7A, but it also needs a special value for
BR2_ARM_CPU_ARMV5, as the pre-compiled Rust standard library for
ARMv5TE is identified with the "armv5te" architecture name, see
https://doc.rust-lang.org/nightly/rustc/platform-support.html.
We noticed this because Rust binaries wouldn't work on an ARMv5
platform (Illegal instruction). This was due to the usage of the
arm-unknown-linux-gnueabi variant of the Rust standard library, which
is for ARMv6. Thanks to this commit, we correctly use the
armv5te-unknown-linux-gnueabi variant, and Rust binaries work properly
on ARMv5TE.
A better approach would be to do the conversion from architecture
options to Rust tuples in a single string symbol that also defines the
supported architectures, similar to how it's done in e.g. openblas.
However, that's a much bigger change. So for now, just do the easy thing
and fix this one issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 1ed4147e76)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The comments were *after* the option they applied to, which was
confusing, so bring back the comments before the option they apply to.
In addition, instead of saying "this option", explicitly name the
option to clear any ambiguity.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 2b5f7ce292)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 1bf512e9ff wrongly added that
BR2_USE_WCHAR is due to flac dependency but flac is optional so remove
this comment and add boost instead
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 20584d1ef2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fixed: [CVE-2021-46141]
Fix a bug affecting both uriNormalizeSyntax* and uriMakeOwner*
functions where the text range in .hostText would not be duped using
malloc but remain unchanged (and hence "not owned") for URIs with
an IPv4 or IPv6 address hostname; depending on how an application
uses uriparser, this could lead the application into a use-after-free
situation.
As the second half, fix uriFreeUriMembers* functions that would not
free .hostText memory for URIs with an IPv4 or IPv6 address host;
also, calling uriFreeUriMembers* multiple times on a URI of this
very nature would result in trying to free pointers to stack
(rather than heap) memory.
- Fixed: [CVE-2021-46142]
Fix functions uriNormalizeSyntax* for out-of-memory situations
(i.e. malloc returning NULL) for URIs containing empty segments
(any of user info, host text, query, or fragment) where previously
pointers to stack (rather than heap) memory were freed.
https://github.com/uriparser/uriparser/blob/uriparser-0.9.6/ChangeLog
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit e00379361e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
pyqt5 uses qmake internally, but is python package rather than a qmake
package. Therefore, we need to manually apply the same fixup as for
qmake packages.
Without this, top-level parallel build may fail because dependencies are
looked for in the qt5 per-package staging directory instead of the
python-pyqt5 one.
Signed-off-by: Florent AUMAITRE <florent.aumaitre@medianesysteme.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 51c22b4ba9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Set PYTHON_EXECUTABLE to avoid the following build failure when
BR2_PACKAGE_PYTHON is enabled but libiio finds python3 without
setuptools on host:
-- Found Python: /usr/bin/python3.5 (found version "3.5.3") found components: Interpreter
-- new
-- Python_EXECUTABLE /usr/bin/python3.5
[...]
Traceback (most recent call last):
File "/home/buildroot/autobuild/instance-0/output-1/build/libiio-0.23/bindings/python/setup.py", line 15, in <module>
from setuptools import setup
ImportError: No module named 'setuptools'
Fixes:
- http://autobuild.buildroot.org/results/d80e56e4ad84c8e7f244cf6d1cb96c116e8eb734
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit f384de4f4e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 593683b45f (package/tpm2-tss: remove unused dependency)
removed the build-time dependency (in the .mk), but forgot to
remove it from the Config.in.
Signed-off-by: Tilman Keskinöz <arved@arved.at>
[yann.morin.1998@free.fr: reword commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit cbb70493af)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Make 4.3 is buggy and when parallel building host-libnss/libnss we end up
with a failure thrown by make itself. So let's work-around this by don't
parallel build the package if Make version is 4.3.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 540029eb45)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Flare games use OGG audio file format througt SDL2-mixer.
Without OGG support, flare-engine trigger a lot of errors in its
log and fail to start the game.
ERROR: SoundManager: ItemManager: Loading sound /usr/share/flare/mods/fantasycore/soundfx/inventory/inventory_gem.ogg (soundfx/inventory/inventory_gem.ogg) failed: Unrecognized audio format
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 1f66c3557a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_V4L2CODECS option has a
dependency on BR2_PACKAGE_HAS_UDEV, but no Config.in comment was added
about this dependency. This commit addresses that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 029a3c3ed7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Set HOSTCC_NOCCACHE and HOSTCXX_NOCCACHE only if they are not
set. This allows recursive calls to "make" to work as intended in the
presence of ccache. Such recursive calls to "make" can for example
happen if one calls "make legal-info" from within a post-build script,
to integrate some results of the legal-info output into the root
filesystem.
Without guarding these variables, a recursive invocation of make would
re-define
HOSTCC_NOCCACHE := $(HOSTCC)
and
HOSTCXX_NOCCACHE := $(HOSTCXX)
at a point in time when HOSTCC and HOSTCXX already point to ccache.
It used to work by "accident" until
ca6a2907c2 ("make: support: use `command
-v' instead of `which'"), due to how "which" was behaving when invoked
with multiple arguments. After switching to "command -v", which
behaves different with multiple arguments, this HOSTCC_NOCCACHE
redefinition problem surfaced. Even though
ca6a2907c2 has since then been reverted
for other reasons, it does make sense to guard the definition of
HOSTCC_NOCCACHE and HOSTCXX_NOCCACHE to not rely on a side-effect of
using "which".
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c5912e7db3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add patch to fix linking failure while creating shared library. As
explained in the patch itself, there is no specific variable for when we
link a shared library and rebar itself rely on the default LDFLAGS. Since
by default every CFLAGS is filled with -fPIC we need to make sure that
every LDFLAGS is the same, so not having any other *_LDFLAGS variable to
fille with -fPIC let's add it to the main LDFLAGS.
Fixes:
http://autobuild.buildroot.net/results/602/60296a48210e7ffc6bc9fa50ee586441a8957e85/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit b00c034fe5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following musl build failure raised since bump to version 6.14
in commit 5292d1cf9a:
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/i586-buildroot-linux-musl/9.3.0/../../../../i586-buildroot-linux-musl/bin/ld: rngd-rngd_jitter.o: in function `rngd_notime_start':
rngd_jitter.c:(.text+0xdc2): undefined reference to `pthread_attr_setaffinity_np'
Fixes:
- http://autobuild.buildroot.org/results/3ec7df86856aa9bee2f18a8faa44fd58bc8a6657
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit d94e2b6dd4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the gcc arc version was bumped to a version using gcc
10.x (arc-2020.09-release) in commit 0791abfba0 (toolchain: update ARC
tools to arc-2020.09-release), the select of BR2_GCC_VERSION_ARC on the
appropriate BR2_TOOLCHAIN_GCC_AT_LEAST_xyz was not updated.
Commit 0b4c7ba01c (toolchain: update option descriptions for ARC tools
arc-2020.09-release) fixed the prompt, but still forgot to update the
appropriate BR2_TOOLCHAIN_GCC_AT_LEAST_xyz.
This commit eventually fixes this issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 81662cf228)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As explained in the patch itself, there is a bug in the handling of
__pselect32() in glibc for the Microblaze architecture. There a
special Microblaze variant that was added to support kernels older
than < 3.15, but it "hides" a generic implementation that is needed to
support kernels newer than 3.15 but older than 5.1 (which is when the
time64 support for 32-bit architectures was added, making __pselect32
no longer needed).
This bug causes a glibc build failure for kernels >= 3.15 but < 5.1,
on Microblaze.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 17ebb6ffae)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When binutils 2.37 was introduced in commit
62f0232980 ("package/binutils: add
version 2.37"), the patch
0008-or1k-fix-pc-relative-relocation-against-dynamic-on-P.patch was
not properly updated. Indeed, between binutils 2.36 and 2.37, binutils
has switched to using the standard "bool" type, so instead of using
TRUE/FALSE, true/false must be used.
With this change, the binutils patch matches the one that was merged
upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit b032faa401)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Configuring coreutils with gl_cv_func_fstatat_zero_flag=no results in
non-functional lchmod library function which causes 'mkfifo -m' to
always complete with the message 'cannot set permissions of ...: Invalid
argument' and an error exit code. gl_cv_func_fstatat_zero_flag=no is not
needed when building coreutils-9.0 for linux and its setting should be
correctly determined by the configure script.
Drop gl_cv_func_fstatat_zero_flag=no from the coreutils configure
environment.
For more details see
https://lists.buildroot.org/pipermail/buildroot/2021-December/631388.html
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit fef5d9fbda)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
His e-mail address is bouncing (and we have some private information
that explains why):
Ryan Barnett (ryan.barnett@collins.com)<mailto:ryan.barnett@collins.com>
The recipient won't be able to receive this message because it's too large.
The maximum message size that's allowed is 1 KB. This message is 7 KB.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 287601459e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Cage requires wlroots to be built with X11 enabled
in order to enable XWayland, otherwise it will fail
with error:
"ERROR: Problem encountered: Cannot build Cage with
XWayland support: wlroots has been built without it"
Signed-off-by: Yunhao Tian <t123yh.xyz@gmail.com>
[yann.morin.1998@free.fr:
- drop explicit _XORG7, as _WLROOTS_X11 depends on it
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 3e4c2d6213)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
*) SECURITY: CVE-2021-44790: Possible buffer overflow when parsing
multipart content in mod_lua of Apache HTTP Server 2.4.51 and
earlier (cve.mitre.org)
A carefully crafted request body can cause a buffer overflow in
the mod_lua multipart parser (r:parsebody() called from Lua
scripts).
The Apache httpd team is not aware of an exploit for the
vulnerabilty though it might be possible to craft one.
This issue affects Apache HTTP Server 2.4.51 and earlier.
Credits: Chamal
*) SECURITY: CVE-2021-44224: Possible NULL dereference or SSRF in
forward proxy configurations in Apache HTTP Server 2.4.51 and
earlier (cve.mitre.org)
A crafted URI sent to httpd configured as a forward proxy
(ProxyRequests on) can cause a crash (NULL pointer dereference)
or, for configurations mixing forward and reverse proxy
declarations, can allow for requests to be directed to a
declared Unix Domain Socket endpoint (Server Side Request
Forgery).
This issue affects Apache HTTP Server 2.4.7 up to 2.4.51
(included).
For more details, see the changes file:
https://downloads.apache.org/httpd/CHANGES_2.4.52
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit bdc3f6888f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
janus-gateway is vulnerable to Improper Neutralization of Input During
Web Page Generation ('Cross-site Scripting')
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 2fd3c2cf43)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- A vulnerability (GHSL-2021-1038) in the HTML cleaner allowed sneaking
script content through SVG images (CVE-2021-43818).
- A vulnerability (GHSL-2021-1037) in the HTML cleaner allowed sneaking
script content through CSS imports and other crafted constructs
(CVE-2021-43818).
https://github.com/lxml/lxml/blob/lxml-4.6.5/CHANGES.txt
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit ad6321660c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Evan has privately requested to no longer receive e-mails related to
this Buildroot package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit acc0d51c53)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS dependency was wrongly added to
BR2_PACKAGE_HOST_IMAGEMAGICK by commit
df20e45463, indeed host-librsvg is only
needed by BR2_PACKAGE_HOST_IMAGEMAGICK_SVG
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 38f6b42d31)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2021-4048: An out-of-bounds read flaw was found in the CLARRV,
DLARRV, SLARRV, and ZLARRV functions in lapack through version 3.10.0,
as also used in OpenBLAS before version 0.3.18. Specially crafted inputs
passed to these functions could cause an application using lapack to
crash or possibly disclose portions of its memory.
It should be noted that commit 59a1fcc696
wrongly assumed that this CVE was fixed in version 3.10.0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 83134027a0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with glibc >= 2.34:
In file included from timerobj.c:32:
In function 'threadobj_set_current',
inlined from 'server_prologue' at timerobj.c:94:2:
../../include/copperplate/threadobj.h:252:9: error: 'pthread_setspecific' expecting 1 byte in a region of size 0 [-Werror=stringop-overread]
252 | pthread_setspecific(threadobj_tskey, thobj);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/ed93f916eda304b30f320816c85d1b0d4488c699
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 1b3055cc8d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current configuration fails to boot on the stm32f469-disco board.
Make it bootable again by reverting the DRAM patches.
Also change the kernel load address from 0x8010000 to 0x800C000 to
allocate more space to the kernel, since 32kB for the device tree is
enough.
Also clean up the rootfs a bit with the common stm32-post-build.sh
script.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Acked-by: Christophe Priouzeau <christophe.priouzeau@foss.st.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 82c1a43792)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
They are currently expressed as such:
depends on (BR2_ENABLE_LOCALE && BR2_USE_WCHAR)
which is not the common practice in Buildroot. We prefer to use:
depends on BR2_ENABLE_LOCALE
depends on BR2_USE_WCHAR
This commit ensures linux-pam is consistent with this best practice.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ac9261edec)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_PACKAGE_LINUX_PAM depends on BR2_USE_MMU, but this dependency is
not taken into account in the Config.in comment, which this commit
fixes.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 8f0df6609a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with help2man raised since bump to
version 1.26.0 in commit be76508af2:
FAILED: docs/man/mbimcli.1
/usr/bin/help2man --output=docs/man/mbimcli.1 '--name=Control MBIM devices' '--help-option="--help-all"' /home/peko/autobuild/instance-1/output-1/build/libmbim-1.26.0/build/src/mbimcli/mbimcli
help2man: can't get `"--help-all"' info from /home/peko/autobuild/instance-1/output-1/build/libmbim-1.26.0/build/src/mbimcli/mbimcli
Try `--no-discard-stderr' if option outputs to stderr
Fixes:
- http://autobuild.buildroot.org/results/eaa2ba54b9c74f07292d3cad4fa96c80e6079702
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit a315d7c98b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ICU build scripting adds some host libraries to LD_LIBRARY_PATH by
using constructs of the following form:
LD_LIBRARY_PATH="custom-path:${LD_LIBRARY_PATH}"
If the original LD_LIBRARY_PATH is empty, this causes the last search
directory be an empty string, i.e. the working directory.
ICU build runs some basic host commands (e.g. "rm") in $(TARGET_DIR)/lib
under such an LD_LIBRARY_PATH, causing target libraries (e.g. libc) to
possibly get loaded instead of host system libraries if they are
compatible enough (e.g. arch matches).
Since the target libraries may not actually be ABI compatible with host
system binaries (e.g. target has an old libc), this can cause crashes
or other errors.
Observed errors include:
(1) rm: libc.so.6: version `GLIBC_2.33' not found (required by rm)
(2) sh: line 1: 1362670 Segmentation fault (core dumped) rm -f libicudata.so.65
Workaround the issue by setting a dummy LD_LIBRARY_PATH when it would
otherwise be empty.
https://unicode-org.atlassian.net/browse/ICU-21417
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit ac1c781149)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised with help2man since bump to
version 1.30.0 in commit 50c5495f81:
FAILED: docs/man/qmicli.1
/usr/bin/help2man --output=docs/man/qmicli.1 '--name=Control QMI devices' '--help-option="--help-all"' /home/peko/autobuild/instance-1/output-1/build/libqmi-1.30.2/build/src/qmicli/qmicli
help2man: can't get `"--help-all"' info from /home/peko/autobuild/instance-1/output-1/build/libqmi-1.30.2/build/src/qmicli/qmicli
Try `--no-discard-stderr' if option outputs to stderr
Fixes:
- http://autobuild.buildroot.org/results/15818b6de7378cd75c59b1d6dc732ed9a20c092a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 7f38ce2103)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following vulnerabilities:
* CVE-2021-4008/ZDI-CAN-14192 SProcRenderCompositeGlyphs out-of-bounds
access
The handler for the CompositeGlyphs request of the Render extension does
not properly validate the request length leading to out of bounds memory
write.
* CVE-2021-4009/ZDI-CAN 14950 SProcXFixesCreatePointerBarrier out-of-bounds
access
The handler for the CreatePointerBarrier request of the XFixes extension
does not properly validate the request length leading to out of bounds
memory write.
* CVE-2021-4010/ZDI-CAN-14951 SProcScreenSaverSuspend out-of-bounds access
The handler for the Suspend request of the Screen Saver extension does not
properly validate the request length leading to out of bounds memory
write.
* CVE-2021-4011/ZDI-CAN-14952 SwapCreateRegister out-of-bounds access
The handlers for the RecordCreateContext and RecordRegisterClients
requests of the Record extension do not properly validate the request
length leading to out of bounds memory write.
For details, see the advisory:
https://lists.x.org/archives/xorg-announce/2021-December/003122.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition...
scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
Tested on beaglebone black and beaglebone white (A6)
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 7b55cb018d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Minor bugfix release:
Changes between 1.1.1l and 1.1.1m [14 Dec 2021]
*) Avoid loading of a dynamic engine twice.
[Bernd Edlinger]
*) Fixed building on Debian with kfreebsd kernels
[Mattias Ellert]
*) Prioritise DANE TLSA issuer certs over peer certs
[Viktor Dukhovni]
*) Fixed random API for MacOS prior to 10.12
These MacOS versions don't support the CommonCrypto APIs
[Lenny Primak]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 2b906b975a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- cgi_error_no_template(): Encode the template name to prevent
XSS (cross-site scripting) when Privoxy is configured to servce
the user-manual itself.
Commit 0e668e9409c. OVE-20211102-0001. CVE-2021-44543.
Reported by: Artem Ivanov
- get_url_spec_param(): Free memory of compiled pattern spec
before bailing.
Reported by Joshua Rogers (Opera) who also provided the fix.
Commit 652b4b7cb0. OVE-20211201-0003. CVE-2021-44540.
- process_encrypted_request_headers(): Free header memory when
failing to get the request destination.
Reported by Joshua Rogers (Opera) who also provided the fix.
Commit 0509c58045. OVE-20211201-0002. CVE-2021-44541.
- send_http_request(): Prevent memory leaks when handling errors
Reported by Joshua Rogers (Opera) who also provided the fix.
Commit c48d1d6d08. OVE-20211201-0001. CVE-2021-44542.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 44a97dcb93)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2021-44420: Potential bypass of an upstream access control based on
URL paths
HTTP requests for URLs with trailing newlines could bypass an upstream
access control based on URL paths.
This issue has low severity, according to the Django security policy.
https://www.djangoproject.com/weblog/2021/dec/07/security-releases/
In addition, 3.2.8 / 3.2.9 fixes a number of bugs.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 086d357dfb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
connman might depend on iptables or nftables, and those dependencies
are already selected later in this file as required.
Config.in already only selects iptables if BR2_PACKAGE_CONNMAN_IPTABLES.
Signed-off-by: Nuno Goncalves <nunojpg@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit edc46a56f6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop spurious "depends on WCHAR" added with commit
ccfc90e101 and adds missing wchar comment
While at it, drop BR2_USE_MMU from comment as it is already added by
BR2_PACKAGE_LIBVIRT_ARCH_SUPPORTS and fix indentation before
(BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_11 || !BR2_aarch64))
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 250e965803)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Beaglebone Black Wireless needs a specific DT, which u-boot tries to
load based on the board name. Make sure we ship the DT so that we can
boot on that platform.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 1984222c84)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
to monitor issues and changes.
Signed-off-by: Andreas Ziegler <br015@umbiko.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit f9ae224604)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Mutt 2.1.4 was released on December 11, 2021. This is a bug-fix release,
fixing a performance issue when used with DavMail.
Mutt 2.1.3 was released on September 10, 2021. This is a bug-fix
release, fixing some of the fixes in the last release. IMAP and
QRESYNC users are advised to upgrade.
Mutt 2.1.2 was released on August 24, 2021. This is an important bug-fix
release, fixing a potential data-loss IMAP bug, a couple QRESYNC bugs,
and a few other issues. IMAP users are strongly advised to upgrade.
http://www.mutt.orghttps://gitlab.com/muttmua/mutt/-/blob/mutt-2-1-4-rel/ChangeLog
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 7686a1382f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
<roman.gorbenkov@ens2m.org>: host mxd.relay.renater.fr[194.214.200.9] said: 550
5.5.0 Requested actions not taken as the mailbox is unavailable (in reply
to RCPT TO command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 656f4a3718)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go1.17.4 (released 2021-12-02) includes fixes to the compiler, linker, runtime,
and the go/types, net/http, and time packages.
go1.17.5 (released 2021-12-09) includes security fixes to the syscall and
net/http packages:
- CVE-2021-44716
- CVE-2021-44717
https://go.dev/doc/devel/release#go1.17
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit eb92bb01b3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The copy command for /usr/share/alsa missing an asterisk cause it to copy to
/usr/share/alsa/alsa instead of /usr/share/alsa where it should be.
Signed-off-by: Khoa Hoang <admin@khoahoang.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 6c71b52235)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In Keepalived through 2.2.4, the D-Bus policy does not sufficiently
restrict the message destination, allowing any user to inspect and
manipulate any property. This leads to access-control bypass in some
situations in which an unrelated D-Bus system service has a settable
(writable) property
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit e4464fabb6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some of the third party code is BSD-licensed. In addition, the roots.pem
certificate store is MPL-licensed.
This was probably already the case in earlier versions as well, but it
was only noticed while updating to 1.42.0 because the LICENSE file was
adapted for it.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 50c4fd9363)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is possible that some users of buildroot have put it in a repository
and call into it from another Makefile such as:
.DEFAULT:
$(MAKE) O=$(abspath $(O)) -C buildroot $(@)
This technique works well except that Make tells us that it changes into
the buildroot directory:
make[1]: Entering directory 'buildroot'
Because this line doesn't have an equals within it, python raises a
ValueError exception within pkg-stats.
This patch has python tell the invoked make not to print directories
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit c988867fd2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, by following the instructions in the manual and querying for
developers for a patch that changes path
package/foobar
the script reports both developers that have these entries in the
DEVELOPERS file:
F: package/foo/
F: package/foobar/
Starting from commit "afc112b0e4 utils/getdeveloperlib.py: fix issue
with hasfile()" get-developers script uses os.path.abspath() and
os.path.relpath().
The catch is that those functions return the absolute path and the
relative path without the trailing slash.
When the paths associated to a developer are then compared to the paths
a patch touches, using the string.startswith(), any substring returns
True, leading to developers for package/foo/ being wrongly reported
for package/foobar/ .
Fix this by re-adding the trailing slash after using relpath().
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Heiko Thiery <heiko.thiery@gmail.com>
Cc: James Knight <james.d.knight@live.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 29bb478a49)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2021-43784: runc is a CLI tool for spawning and running
containers on Linux according to the OCI specification. In runc, netlink
is used internally as a serialization system for specifying the relevant
container configuration to the `C` portion of the code (responsible for
the based namespace setup of containers). In all versions of runc prior
to 1.0.3, the encoder did not handle the possibility of an integer
overflow in the 16-bit length field for the byte array attribute type,
meaning that a large enough malicious byte array attribute could result
in the length overflowing and the attribute contents being parsed as
netlink messages for container configuration. This vulnerability
requires the attacker to have some control over the configuration of the
container and would allow the attacker to bypass the namespace
restrictions of the container by simply adding their own netlink payload
which disables all namespaces. The main users impacted are those who
allow untrusted images with untrusted configurations to run on their
machines (such as with shared cloud infrastructure). runc version 1.0.3
contains a fix for this bug. As a workaround, one may try disallowing
untrusted namespace paths from your container. It should be noted that
untrusted namespace paths would allow the attacker to disable namespace
protections entirely even in the absence of this bug.
https://github.com/opencontainers/runc/releases/tag/v1.0.3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 0acaad1be2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently this .mk snippet results in unexpected behavior from
check-package:
|VAR_1 = VALUE1
|ifeq (condition)
|VAR_1 := $(VAR_1), VALUE2
|endif
Fix commit "163f160a8e utils/{check-package, checkpackagelib}:
consistently use raw strings for re.compile" that ended up doing this:
- CONCATENATING = re.compile("^([A-Z0-9_]+)\s*(\+|:|)=\s*\$\(\\1\)")
+ CONCATENATING = re.compile(r"^([A-Z0-9_]+)\s*(\+|:|)=\s*\$\(\\1\)")
But raw strings do not expect escaping when referencing \1 and the
pattern ends up searching for a raw '\\1' instead of an occurrence of
the first pattern inside parenthesis.
|$ python3
|Python 3.8.10 (default, Sep 28 2021, 16:10:42)
|[GCC 9.3.0] on linux
|Type "help", "copyright", "credits" or "license" for more information.
|>>> import re
|>>> p1 = re.compile('(foo)bar\\1')
|>>> p2 = re.compile(r'(foo)bar\\1')
|>>> p3 = re.compile(r'(foo)bar\1')
|>>> s1 = 'foobarfoo'
|>>> s2 = 'foobar\\1'
|>>> print(p1.search(s1))
|<re.Match object; span=(0, 9), match='foobarfoo'>
|>>> print(p2.search(s1))
|None
|>>> print(p3.search(s1))
|<re.Match object; span=(0, 9), match='foobarfoo'>
|>>> print(p1.search(s2))
|None
|>>> print(p2.search(s2))
|<re.Match object; span=(0, 8), match='foobar\\1'>
|>>> print(p3.search(s2))
|None
|>>>
So use '\1' instead of '\\1' in the raw string.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 5bbedea9c2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As stated on www.pcre.org:
You can download the current release of the PCRE2 library from its
official home on GitHub
[...]
Note that the former ftp.pcre.org FTP site is no longer available.
Update _SITE URL to the official home on Github.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[yann.morin.1998@free.fr: use Github, not SourceForge]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit cc570eff96)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The following are runtime dependencies for host-python-requests:
host-python-certifi
host-python-charset-normalizer
host-python-idna
host-python-urllib3
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit b48d10f40a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A host variant of the python-urllib3 package will be needed for the
host-python-requests package.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit dccfefafd4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A host variant of the python-idna package will be needed for the
host-python-requests package.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 7c4a52e087)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A host variant of the python-charset-normalizer package will be needed
for the host-python-requests package.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 07fc2fb1a5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The message attribute does not exist in python3, see PEP-0352:
https://www.python.org/dev/peps/pep-0352/
Fixes:
Traceback (most recent call last):
File "utils/scanpypi", line 743, in <module>
main()
File "utils/scanpypi", line 693, in main
if 'buildutils' in err.message:
AttributeError: 'ImportError' object has no attribute 'message'
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit c3029878c5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2021-4048: An out-of-bounds read flaw was found in the CLARRV,
DLARRV, SLARRV, and ZLARRV functions in lapack through version 3.10.0,
as also used in OpenBLAS before version 0.3.18. Specially crafted
inputs passed to these functions could cause an application using
lapack to crash or possibly disclose portions of its memory.
- Drop first and second patches (already in version)
https://github.com/xianyi/OpenBLAS/blob/v0.3.18/Changelog.txt
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This bump is mainly to fix the header file nameclash problem with LiTE,
in package/lite. See the libite project's README for how to adapt to
this change, and the ChangeLog for details. In short, libite now use
the /usr/include/libite/*.h prefix.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This addresses the autobuilder failure for master as per 2021-11-27.
The root cause was a name clash in a dependency, the libite library,
clashing with the DirectFB LiTE library header files. Hence, this
update alone does not fix [1], libite also needs to be updated. To
provide a smooth transition though, watchdogd should be updated first.
[1]: http://autobuild.buildroot.net/results/185c753af2aa159b494b13f78b0826dddbe4aed6
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Do the same as commit "12c01079bd package/stress-ng: bump to version
0.13.05" did for 2022.02 but without the version bump.
The project URL returns 404 error because:
Quoting Coling King:
"Unfortunately when I left Canonical last week they removed my tarballs"
So use github and update hash.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Ricardo: do not bump the version.
There will be no version clash at sources.buildroot.net since the file
format changed]
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.com.br>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We define _DEFAULT_SOURCE in mkpasswd.c to suppress a compiler warning.
In file included from /usr/include/x86_64-linux-gnu/bits/libc-header-start.h:33,
from /usr/include/stdio.h:27,
from [...]/buildroot/output/arm64/build/host-mkpasswd/mkpasswd.c:24:
/usr/include/features.h:187:3:
187 | # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE"
| ^~~~~~~
As per GLIBC 2.20 release notes[1]:
The _BSD_SOURCE and _SVID_SOURCE feature test macros are no longer
supported; they now act the same as _DEFAULT_SOURCE (but generate a
warning). Except for cases where _BSD_SOURCE enabled BSD interfaces
that conflicted with POSIX (support for which was removed in 2.19),
the interfaces those macros enabled remain available when compiling
with _GNU_SOURCE defined, with _DEFAULT_SOURCE defined, or without
any feature test macros defined.
[1] https://lwn.net/Articles/611162/
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes:
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition of `yylloc';
scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Commit 82d1e8c628 (boot/grub2: use none platform when building for
host) changed host-grub2 to only install the tools, not the actual
bootloader or its modules, as they are of no use on the host.
It so happened that, when not instructed to built for a specific
platform, the grub2 buildsystem would default to build the legacy bios
platform (at least when the build happens on an x86 or x86_64 host).
However, because the host is more often than not an x86 or x86_64, when
the target was also an x68 or x86_64, the modules built for the host
could be re-used for the target, and this is what was done for our
pc_x86_64_bios_defconfig.
But now that we explicitly tell the grub2 buildsystem to not build any
platform when we build host-grub2, we no longer have access to the grub2
modules from the host directory, and the build fails when assembling the
final image.
We fix that in two ways:
First, we ensure that individual modules from the target grub2 get installed
in target/; we can only do that if the target grub2 tools are also
installed, so we enable that in the configuration.
Second, we fix the post-build script to look in target/ rather than in
host/.
All that, just for the 512-byte boot.img bootstrap, which pulls in all
the other modules (4.3MiB), the tools (8.8MiB)... But we are not going
to cherry-pick individual modules; this is error prone and
unmaintainable...
Reported-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Köry Maincent <kory.maincent@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some last-minute changes were made when applying commits 7a68960b68
(boot/grub2/Config.in: add symbols to represent legacy and EFI boot) and
4d5b209384 (package/mender-grubenv: fix grub module checks), and the
renaming of the BR2_TARGET_GRUB_LEGACY was not fully propagated.
This caused the path to the boot files to always be interpreted as being
the EFI one, and never the legacy one. In practice, that was not causing
any build failure, because the path was passed at build-time to
mender-grubenv, that would use it as the location where to install its
files, and finally as the location where our image-isntall commands
would look for them.
Still this is incorrect because it would not match where grub2 would
eventually end up lookig for its files at runtime...
To avoid further issue, drop the conditional block dedicated to setting
the path to the boot files, drop the intermediate variable, and move
setting the environment variable down into the existing conditional
block.
We do drop the intermediate variable, because there is no longer any
genericity needed: the installation commands are already duplicated for
the two cases anyway.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Adam Duskett <aduskett@gmail.com>
Cc: Köry Maincent <kory.maincent@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 0cfa165948 (package/pkg-utils.mk: introduce "name" field in
show-info output) did what it said, but did so in the generic show-info
part, thus it was also added to filesystems (rootfs), the other kind of
entity that show-info reports on.
Only packages have a "name"; filesystems do not. Instead, they already
have an 'image_name'.
Move the 'name' field to the package-related part of show-info.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The unmatched escaped single-quote lies in the middle of a few
function calls, so they too must be fake-closed to properly fix
colour highlighting in some editors.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some packages install nothing in target nor staging, but install images
(like the kernel vmlinux, or a bootloader boot blob...)
If we want to appropriately account for the files installed by each
package, we also need to take images/ into account.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When calling 'printvars', the 'suitable-host-package' macro is printed
(a macro is just a variable like the others, after all, just with some
parameters). Because it is printed as a variable, it is missing its
parameters, but it still tries to evaluate the $(shell) construct.
This causes spurious warning:
make[1]: support/dependencies/check-host-.sh: Command not found
Only try and call the script if there is actually a tool to check for.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When calling 'printvars' on a just-configured tree, the output contains
many spurious warnings about pkg-config being not found:
make[1]: [...]/host/bin/pkg-config: Command not found
This is partly because a few packages call pkg-config at the time the
Makefile is parsed (really, right when make evaluates the recipe before
executing it).
It is customary, instead, to defer the call to pkg-config to the actual
shell running the recipe's commands, like all our other packages do.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, the build_dir field is reported relative to $(BASE_DIR), to
avoid leaking local paths.
However, BASE_DIR is not a directory that is very convenient: for
in-tree builds, it is $(CONFIG_DIR)/output/, while for out-of-tree
builds, it is $(CONFIG_DIR). This difference is purely an idiosyncracy
of how out-of-tree builds have been implemented in Buildroot, and is
not under the control of the user.
What the user is in control of, however, is where the .config file is
located. This, really, is the directory we should base relative paths
on.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit b68810e70c (boot/grub2: add support to build multiple Grub2
configurations in the same build) broke mender-grubenv by splititng up
BR2_TARGET_GRUB2_BUILTIN_MODULES into two separate symbols, one for
legacy boot and one for EFI boot.
This change causes a systematic build failure now, as the legacy variable
BR2_TARGET_GRUB2_BUILTIN_MODULES is now always empty (during build).
We fix that by supplicating the missing modules to check: one for EFI and
one for legacy boot.
The EFI check is tricky: Indeed, there can be more than one EFI platform
enabled simultaneously; indeed, on x86_64, we can have both the 32-bit
and 64-bit EFI platforms enabled. So the check is inverted, and we check
that no platform is not enabled (yeah, double negation). For consistency,
we do the same for the legacy boot, even though in that case, there can
only ever be only one enabled at once at most.
Furthermore, mender-grubenv does not support multiple installations of
grub concurrently; it can only be installed for either legacy or EFI,
not both at the same time: /etc/mender-grubenv.cfg, its configuration
file, can only contain settings for one or the other, not both.
So we add a new check to Config.in to support only one grub installation
type at a time.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr:
- drop superfluous check on empty modules lists
- move EFI and legacy commands under same condition as checks
- variables were renamed
- misc eye-candy
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Köry Maincent <kory.maincent@bootlin.com>
The help was missing the regexp module.
The variable assignment was missing spaces around the equal sign.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr: split to its own patch, fix assignment too]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Köry Maincent <kory.maincent@bootlin.com>
There are cases to want a synthetic information whether the legacy BIOS
or U-Boot boot scheme, or the EFI boot scheme, are enabled, without
resorting to testing all and each platforms.
This is already the cae in grub2 itself, for the configuration of the
BIOS/U-Boot boot partition, and builtin modules and configuration on one
hand, and the EFI builtin modules and configuraiton on the other hand.
It is also the case for mender-grubenv, which will want to know if
either or both are enabled, but without having to resort to testing all
the cases.
Add two new symbols, that each represent those conditions:
* BR2_TARGET_GRUB2_HAS_LEGACY_BOOT
* BR2_TARGET_GRUB2_HAS_EFI_BOOT
Each target selects the appropriate bool, which makes it much more
simple for other packages such as mender-grubenv to check if grub legacy
or EFI is selected.
And of course, we also make use of those symbols in grub2 itself, to
simplify the conditions for showing.hiding legacy and EFI options.
Additionally (but that does not merit being in its own patch), add a
comment on the closing 'endif' for the EFI part.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr:
- s/BR2_TARGET_GRUB_/BR2_TARGET_GRUB2_/
- rename variables anyway
- use variables in grub2 itself
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Köry Maincent <kory.maincent@bootlin.com>
Fix CVE-2021-4020: janus-gateway is vulnerable to Improper
Neutralization of Input During Web Page Generation ('Cross-site
Scripting')
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As already done for libglib2 in commit
b094f88a4d, fix girdir to avoid the
following build failure with gst1-plugins-base and introspection:
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/riscv32-buildroot-linux-gnu/sysroot/usr/bin/g-ir-compiler gst-libs/gst/tag/GstTag-1.0.gir --output gst-libs/gst/tag/GstTag-1.0.typelib --includedir=/usr/share/gir-1.0
Could not find GIR file 'Gst-1.0.gir'; check XDG_DATA_DIRS or use --includedir
Fixes:
- http://autobuild.buildroot.org/results/d1e2bdde97777ff61c185d375ba412a93e7ca467
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2021-30535: Double free in ICU in Google Chrome prior to
91.0.4472.77 allowed a remote attacker to potentially exploit heap
corruption via a crafted HTML page.
https://nvd.nist.gov/vuln/detail/CVE-2021-30535
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
xz compresses better than bzip2, and is (getting) more popular, so build
release tarballs as .tar.xz (in addition to .tar.gz) instead of .tar.bz2,
similar to how the kernel did ~8 years ago:
https://www.kernel.org/happy-new-year-and-good-bye-bzip2.html
-rw-r--r-- 1 peko peko 5,1M Dec 2 17:55 buildroot-2021.11-rc3.tar.xz
-rw-r--r-- 1 peko peko 5,7M Nov 30 18:15 buildroot-2021.11-rc3.tar.bz2
-rw-r--r-- 1 peko peko 6,8M Nov 30 18:15 buildroot-2021.11-rc3.tar.gz
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with uclibc < 1.0.35 raised since bump
to version 3.8 in commit 1f89c80417:
In file included from ./sys/random.h:40,
from getrandom.c:22:
/home/giuliobenetti/autobuild/run/instance-0/output-1/host/x86_64-buildroot-linux-uclibc/sysroot/usr/include/sys/random.h:27:35: error: unknown type name 'size_t'
27 | extern int getrandom(void *__buf, size_t count, unsigned int flags)
| ^~~~~~
/home/giuliobenetti/autobuild/run/instance-0/output-1/host/x86_64-buildroot-linux-uclibc/sysroot/usr/include/sys/random.h:8:1: note: 'size_t' is defined in header '<stddef.h>'; did you forget to '#include <stddef.h>'?
7 | #include <features.h>
+++ |+#include <stddef.h>
8 |
Fixes:
- http://autobuild.buildroot.org/results/adecc3e5def140348dfff30961fe6514c9a8e7b5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Don't install compile_et as it raises the following build failure with
samba4 since, at least, bump to version 4.14.7 in commit
630e85f8f5:
source4/heimdal/lib/asn1/asn1_err.c:47:23: error: 'link' redeclared as different kind of symbol
47 | static struct et_list link = { 0, 0 };
| ^~~~
In file included from /home/giuliobenetti/autobuild/run/instance-1/output-1/host/s390x-buildroot-linux-gnu/sysroot/usr/include/bits/sigstksz.h:24,
from /home/giuliobenetti/autobuild/run/instance-1/output-1/host/s390x-buildroot-linux-gnu/sysroot/usr/include/signal.h:328,
from /home/giuliobenetti/autobuild/run/instance-1/output-1/host/s390x-buildroot-linux-gnu/sysroot/usr/include/sys/param.h:28,
from ../../lib/replace/../replace/replace.h:659,
from ../../source4/heimdal_build/config.h:10,
from source4/heimdal/lib/asn1/asn1_err.c:1:
/home/giuliobenetti/autobuild/run/instance-1/output-1/host/s390x-buildroot-linux-gnu/sysroot/usr/include/unistd.h:819:12: note: previous declaration of 'link' was here
819 | extern int link (const char *__from, const char *__to)
| ^~~~
Fixes:
- http://autobuild.buildroot.org/results/d6de6ed59c553f6f413d280f3c65184945bb3850
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use single space in LIBFOO_{DEVICES,PERMISSIONS} to be consistent with
LIBFOO_USERS, package/makedevs/README and most examples/packages
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This fixes build on an ARM64 host (and I assume also
other non-x86).
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update fourth patch to add girdir in gio-2.0.pc. This will fix the
following build failure with libnice raised since commit
aade2fd293:
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/riscv32-buildroot-linux-gnu/sysroot/usr/bin/g-ir-compiler nice/Nice-0.1.gir --output nice/Nice-0.1.typelib --includedir=/usr/share/gir-1.0
Could not find GIR file 'GObject-2.0.gir'; check XDG_DATA_DIRS or use --includedir
Fixes:
- http://autobuild.buildroot.org/results/3088ef32b03e0bb984291b1227b187f1ff816eb7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2021-3973: vim is vulnerable to Heap-based Buffer Overflow
- Fix CVE-2021-3974: vim is vulnerable to Use After Free
- Fix CVE-2021-3968: vim is vulnerable to Heap-based Buffer Overflow
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that our pipelines are using the Docker image from the Gitlab
registry, there is no longer any reason to push the image to the
Docker hub.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On a properly setup machine, it is totally useless to use sudo to run
docker; it is very bad practice. Instead, users really should add
themselves to the docker group.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In Pure-FTPd 1.0.49, an incorrect max_filesize quota mechanism in the
server allows attackers to upload files of unbounded size, which may
lead to denial of service or a server hang. This occurs because a
certain greater-than-zero test does not anticipate an initial -1 value.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
* In some situations the X.509 verifier would discard an error on an
unverified certificate chain, resulting in an authentication bypass.
Thanks to Ilya Shipitsin and Timo Steinlein for reporting.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
GNU Multiple Precision Arithmetic Library (GMP) through 6.2.1 has an
mpz/inp_raw.c integer overflow and resultant buffer overflow via crafted
input, leading to a segmentation fault on 32-bit platforms.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since the addition of
introspection in commit 3915e17e77:
/home/giuliobenetti/autobuild/run/instance-1/output-1/host/bin/../riscv32-buildroot-linux-gnu/sysroot/usr/bin/g-ir-compiler -l `/usr/bin/sed -nE "s/^dlname='([A-Za-z0-9.+-]+)'/\1/p" libgee-0.8.la` -o Gee-0.8.typelib Gee-0.8.gir libgee-0.8.la
Could not find GIR file 'GObject-2.0.gir'; check XDG_DATA_DIRS or use --includedir
error parsing file Gee-0.8.gir: Failed to parse included gir GObject-2.0
Fixes:
- http://autobuild.buildroot.org/results/884faa0f84c8dc43ed1ca6cde9caf21c731a4b35
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since upstream commit bb1d35dc1767 [1] (which is part of the bump to
version 1.4.60), configure.ac no longer checks for a specific C
standard. It will therefore use the "default" standard. With autoconf
2.69 (which is what is used to generate the configure script in the
tarball), the default standard is C89, which requires no option to be
passed to the compiler. However, that means that older compilers, e.g.
GCC 4.8, will indeed use C89 and not C99. This leads to the following
error.
array.c:140:2: error: 'for' loop initial declarations are only allowed in C99 mode
for (uint32_t i = 0; i < sz; ++i) {
^
In autoconf 2.71 (which is used by Buildroot), the default standard has
changed: it is now C11 if available, C99 failing that, and finally fall
back to C89. Since GCC 4.8 (and later) support C11, that's what will be
selected, so C99 is allowed as well. Thus, running autoreconf fixes the
build.
The issue was reported upstream [2].
Fixes:
- http://autobuild.buildroot.org/results/0349d8fed35b0766796dd9ba3b8de6ff8bd68fe7
[1] https://redmine.lighttpd.net/projects/lighttpd/repository/14/revisions/bb1d35dc17671bc308e25651b4f5fa0c3008cc69
[2] https://redmine.lighttpd.net/issues/3116
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Starting with uboot 2021.10, with upstream commit 473fc279c89 (kconfig /
kbuild: Re-sync with Linux 4.20), the kconfig in uboot now needs the
compiler to detect its features.
Like was done for linux in 3fc990a798 (linux: kconfig needs the
toolchain) and barebox in 1c1a629d81 (boot/barebox: kconfig needs the
toolchain), add the toolchain to the kconfig dependencies of uboot.
Reported-by: Davian on IRC
Reported-by: Xogium on IRC
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As stated on www.pcre.org:
"Note that the former ftp.pcre.org FTP site is no longer available."
Update _SITE URL to Sourceforge.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following per-package build failure with apache:
/home/buildroot/autobuild/instance-3/output-1/per-package/apparmor/host/aarch64-buildroot-linux-gnu/sysroot/usr/bin/../../usr/build-1/libtool --silent --mode=link /home/buildroot/autobuild/instance-3/output-1/per-package/apparmor/host/bin/aarch64-linux-gcc -o mod_apparmor.la -rpath /usr/modules -module -avoid-version mod_apparmor.lo -L/home/buildroot/autobuild/instance-3/output-1/per-package/apparmor/host/bin/../aarch64-buildroot-linux-gnu/sysroot/usr/lib -lapparmor
/home/buildroot/autobuild/instance-3/output-1/per-package/apache/host/opt/ext-toolchain/bin/../lib/gcc/aarch64-buildroot-linux-gnu/9.3.0/../../../../aarch64-buildroot-linux-gnu/bin/ld: cannot find /lib64/libc.so.6
This build failure is raised because the fix added by commit
3c836e5420 was incomplete as the apr
special libtool script was not patched (see commit
b747c29c4e for a detailled explanation)
Fixes:
- http://autobuild.buildroot.org/results/6747b1cb11b129ea4bcb1ecc9645e94fb8e095e8
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since bump to version 1.47 in
commit 710b0eaebe:
/home/buildroot/autobuild/instance-3/output-1/host/opt/ext-toolchain/arm-buildroot-uclinux-uclibcgnueabi/bin/ld.real: sg_dd.o: in function `sg_read_low.constprop.0':
sg_dd.c:(.text+0xc6c): undefined reference to `sg_chk_n_print3'
Fixes:
- http://autobuild.buildroot.org/results/38a0dfc70a21ce574368b7a485deb231f778b3e7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- fix getrandom compile for uclibc < v1.0.35, add missing stddef.h
include (fixed in uclibc since v1.0.35, see [1])
Fixes:
.../host/x86_64-buildroot-linux-uclibc/sysroot/usr/include/sys/random.h:27:35: error: unknown type name ‘size_t’
27 | extern int getrandom(void *__buf, size_t count, unsigned int flags)
| ^~~~~~
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We need to backport an upstream patch adding async_timeout 4.0.0
compatibility since we are still on aiohttp version 3.7.4.post0.
Fixes:
>>> import aiohttp
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python3.9/site-packages/aiohttp/__init__.py", line 6, in <module>
File "/usr/lib/python3.9/site-packages/aiohttp/client.py", line 35, in <module>
File "/usr/lib/python3.9/site-packages/aiohttp/http.py", line 7, in <module>
File "/usr/lib/python3.9/site-packages/aiohttp/http_parser.py", line 15, in <module>
File "/usr/lib/python3.9/site-packages/aiohttp/helpers.py", line 667, in <module>
TypeError: function() argument 'code' must be code, not str
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The server does not support TLS v1.2, causing dowloads to fall back to
sources.buildroot.net. Mail sent to the project owner bounces, so it
looks like this issue will not be solved anytime soon.
Switch to HTTP, like was done in commit 399ad854cc (package/mksh:
fix project URL in Config.in) for the homepage, and rely on our hashes
to verify the integrity and authenticity of the download.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
[yann.morin.1998@free.fr: slight rewording in the commit message]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As was just done for the target variant in commit 8d23bc990c
(package/luajit: fix LUAJIT_XCFLAGS), also fix the host variant
which uses the same flags.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, when BR2_LINUX_KERNEL_INSTALL_TARGET=y is selected, issuing
a "saveenv" command in the U-Boot prompt may lead to rootfs corruption.
When BR2_LINUX_KERNEL_INSTALL_TARGET is not selected, then
board/freescale/common/imx/genimage.cfg.template is used as per the logic
inside board/freescale/common/imx/post-image.sh.
board/freescale/common/imx/genimage.cfg.template correctly puts the
rootfs at a safe offset.
With BR2_LINUX_KERNEL_INSTALL_TARGET=y, then
board/freescale/common/imx/genimage.cfg.template_no_boot_part or
board/freescale/common/imx/genimage.cfg.template_no_boot_part_spl
are used and no offset to the rootfs is given, which may cause U-Boot
environment area to write into the rootfs area, causing the rootfs
corruption.
Avoid this problem by placing the rootfs at an 8MB offset, just like
it is done in board/freescale/common/imx/genimage.cfg.
Tested on a imx6qp-wandboard and also on a custom imx6ull based board.
"saveenv" does not corrupt the rootfs anymore after this change.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Build of coreutils with uclibc < 1.0.35 is broken since bump to version
9.0 in commit 2ee43bad85:
In file included from ./lib/sys/random.h:40,
from lib/getrandom.c:22:
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/x86_64-buildroot-linux-uclibc/sysroot/usr/include/sys/random.h:27:35: error: unknown type name 'size_t'
27 | extern int getrandom(void *__buf, size_t count, unsigned int flags)
| ^~~~~~
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/x86_64-buildroot-linux-uclibc/sysroot/usr/include/sys/random.h:8:1: note: 'size_t' is defined in header '<stddef.h>'; did you forget to '#include <stddef.h>'?
7 | #include <features.h>
+++ |+#include <stddef.h>
8 |
Fixes:
- http://autobuild.buildroot.org/results/c69f5c8b8e53ed3de753f0c6d2cdd99497504b49
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
genrandconfig is used by the Buildroot autobuilders to generate
semi-random configurations that we build test. As part of this, we use
"make randpackageconfig" to randomize the selection of packages,
together with a KCONFIG_PROBABILITY value, which indicates the
probabibility for each option to be enabled. This probability is
itself randomized, between 1% and 30% for every build.
However, with our increasing number of packages (over 2900), when we
use a 30% probability for options to be enabled, it means a *lot* of
options are enabled, causing very large configurations to be
tested. These configurations are not very realistic, and they take
ages to build on our autobuilders: we have builds that take 4, 5 or
even 7 hours to build.
In order to test a larger number of configurations and therefore a
larger variety of configurations, this commit reduces the maximum
probability to 20%.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Drop second patch (already in version)
- Fix CVE-2021-43400: An issue was discovered in gatt-database.c in BlueZ
5.61. A use-after-free can occur when a client disconnects during D-Bus
processing of a WriteValue call.
http://www.bluez.org/release-of-bluez-5-62
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As usual with cmake packages, static builds are not supported and result
in the following build failure:
/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/powerpc-buildroot-linux-uclibc/9.3.0/../../../../powerpc-buildroot-linux-uclibc/bin/ld: /home/buildroot/autobuild/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/lib/libcrypto.a(c_zlib.o): in function `zlib_stateful_expand_block':
c_zlib.c:(.text+0x54): undefined reference to `inflate'
Instead of patching CMakeLists.txt to add a call to pkg-config, add a
dependency on dynamic library
Fixes:
- http://autobuild.buildroot.org/results/16a89075e6a809a551e7155a64a4e6b6701428e1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add myself as co-maintainer of SMCRoute in Buildroot, handy since I'm
the upstream maintainer anyway.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The heuristic to extract the various variables of interest is pretty
crude: we filter on variables ending with certain suffixes (like
'%_VERSION' to get the version strings).
However, in doing so, we may dump variables that are not actual package
versions (especially with br2-external trees), and those may contain one
or more equal sign. And anyway, an actual package version string may
very well contain an equal sign too.
But the current situation is that the output of 'printvars' is split on
all equal signs, which will not fit in the 2-tuple we assign the result,
thus causing an exception.
Fix that by limiting to a single split.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 9c068b4be8 (package/glmark2: fix wayland build) extended the set
of required libraries for various "flavor" options by selecting those
libraries from the blind options.
However, those blind options are true as soon as their requirements are
met (the depends on), even when glmark2 itself is not enabled.
This means that extra libraries are pulled in to the build, even when
not required.
We fix that by moving the actual selects to the main symbol, along with
the proper conditions. This means that we have two lines that select
wayland-protocols, under two different conditions; we could make that a
single select, but the condition would need to be on two lines anyway,
so meh...
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure with glibc >= 2.34:
In file included from /home/giuliobenetti/autobuild/run/instance-0/output-1/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/signal.h:328,
from /home/giuliobenetti/autobuild/run/instance-0/output-1/host/arm-buildroot-linux-gnueabihf/include/c++/11.2.0/csignal:42,
from src/mongo/stdx/thread.h:33,
from src/mongo/db/client.h:46,
from src/mongo/db/operation_context.h:36,
from src/mongo/db/pipeline/variables.h:32,
from src/mongo/db/pipeline/dependencies.h:37,
from src/mongo/db/matcher/expression.h:38,
from src/mongo/db/matcher/expression_parser.h:34,
from src/mongo/db/pipeline/document_source_list_sessions.cpp:34:
src/mongo/stdx/thread.h:107:56: error: call to non-'constexpr' function 'long int sysconf(int)'
107 | std::max(kMongoMinSignalStackSize, std::size_t{MINSIGSTKSZ});
|
Fixes:
- http://autobuild.buildroot.org/results/6be8efb96547f8ec6e9b776abae8c1b51501e9ed
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As explained by Jörg [1], iteration with pairs() does not result in the
same order since luajit 2.1.
From [2]
"Table iteration with pairs() does not result in the same order?
The order of table iteration is explicitly undefined by the Lua
language standard. Different Lua implementations or versions may use
different orders for otherwise identical tables. Different ways of
constructing a table may result in different orders, too. Due to
improved VM security, LuaJIT 2.1 may even use a different order on
separate VM invocations or when string keys are newly interned.
If your program relies on a deterministic order, it has a bug.
Rewrite it, so it doesn't rely on the key order.
Or sort the table keys, if you must."
Note: The "luvi -v" return 255 even on success.
[1] http://lists.busybox.net/pipermail/buildroot/2021-November/627938.html
[2] https://luajit.org/faq.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Francois Perrad <francois.perrad@gadz.org>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Luvi uses the cross bytecode generation of host-luajit
the bytecode format has 2 flavors, depending of GC64 option.
Since the commit https://github.com/LuaJIT/LuaJIT/commit/bd00094c3b50e193fb32aad79b7ea8ea6b78ed25
GC64 mode is enable by default on all 64bits platform.
With this patch, luajit and host-luajit are built with the same option,
so the bytecode generated by host-luajit is valid on luajit.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Romain:
- update commit title
- add a comment about missing LUAJIT_ENABLE_GC64]
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit reworks how BR2_PACKAGE_LUAJIT_ARCH_SUPPORTS is
defined to follow the recommended syntax.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Francois Perrad <francois.perrad@gadz.org>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: alphabetical order]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Luajit package has been recently updated to the latest commit in the
master branch [1]. Since then LUAJIT_VERSION doesn't contain the luajit
version anymore but a commit hash:
LUAJIT_VERSION = 05f1984e1a862e4b3d3c3b370c773492e2edf84a
Use pkg-config --variable=version luajit in luvi package to set
LUA_PATH correctly.
Fixes:
luajit: unknown luaJIT command or jit.* modules not installed
https://gitlab.com/buildroot.org/buildroot/-/jobs/1710552605
[1] 9450b53c8e
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure with gcc 4.8 raised since the addition
of the package in commit c23612b5db:
In file included from /home/buildroot/autobuild/instance-3/output-1/build/opencv4-4.5.4/modules/videoio/src/cap_ffmpeg_impl.hpp:100:0,
from /home/buildroot/autobuild/instance-3/output-1/build/opencv4-4.5.4/modules/videoio/src/cap_ffmpeg.cpp:50:
/home/buildroot/autobuild/instance-3/output-1/build/opencv4-4.5.4/modules/videoio/src/cap_ffmpeg_hw.hpp: In constructor 'HWAccelIterator::HWAccelIterator(cv::VideoAccelerationType, bool, AVDictionary*)':
/home/buildroot/autobuild/instance-3/output-1/build/opencv4-4.5.4/modules/videoio/src/cap_ffmpeg_hw.hpp:939:23: error: use of deleted function 'std::basic_istringstream<char>& std::basic_istringstream<char>::operator=(const std::basic_istringstream<char>&)'
s_stream_ = std::istringstream(accel_list);
^
In file included from /home/buildroot/autobuild/instance-3/output-1/host/opt/ext-toolchain/arm-none-linux-gnueabi/include/c++/4.8.3/complex:45:0,
from /home/buildroot/autobuild/instance-3/output-1/build/opencv4-4.5.4/modules/core/include/opencv2/core/cvstd.inl.hpp:47,
from /home/buildroot/autobuild/instance-3/output-1/build/opencv4-4.5.4/modules/core/include/opencv2/core.hpp:3306,
from /home/buildroot/autobuild/instance-3/output-1/build/opencv4-4.5.4/modules/videoio/include/opencv2/videoio.hpp:46,
from /home/buildroot/autobuild/instance-3/output-1/build/opencv4-4.5.4/modules/videoio/src/precomp.hpp:57,
from /home/buildroot/autobuild/instance-3/output-1/build/opencv4-4.5.4/modules/videoio/src/cap_ffmpeg.cpp:42:
/home/buildroot/autobuild/instance-3/output-1/host/opt/ext-toolchain/arm-none-linux-gnueabi/include/c++/4.8.3/sstream:272:11: note: 'std::basic_istringstream<char>& std::basic_istringstream<char>::operator=(const std::basic_istringstream<char>&)' is implicitly deleted because the default definition would be ill-formed:
class basic_istringstream : public basic_istream<_CharT, _Traits>
^
/home/buildroot/autobuild/instance-3/output-1/host/opt/ext-toolchain/arm-none-linux-gnueabi/include/c++/4.8.3/sstream:272:11: error: use of deleted function 'std::basic_istream<char>& std::basic_istream<char>::operator=(const std::basic_istream<char>&)'
Fixes:
- http://autobuild.buildroot.org/results/60f8846b435dafda0ced412d59ffe15bdff0810d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure raised since bump to version 0.3.39 in
commit d9796f2db9:
/tmp/ccsZ6haQ.s:467: Error: selected processor does not support `vmrs r3,fpscr' in ARM mode
/tmp/ccsZ6haQ.s:469: Error: selected processor does not support `vmsr fpscr,r3' in ARM mode
/tmp/ccsZ6haQ.s:490: Error: selected processor does not support `vmrs r3,fpscr' in ARM mode
/tmp/ccsZ6haQ.s:492: Error: selected processor does not support `vmsr fpscr,r3' in ARM mode
Fixes:
- http://autobuild.buildroot.org/results/d449095c67b9477fc95ebbab5eb628e5eb4ea5c6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure on one mips toolchain with gcc 5.3
raised since bump to version 2.18.2 in commit
47fa16dffa:
src/lib/hash/sha3/sha3.cpp: In function 'std::tuple<long long unsigned int, long long unsigned int, long long unsigned int, long long unsigned int, long long unsigned int> Botan::{anonymous}::xor_CNs(const uint64_t*)':
src/lib/hash/sha3/sha3.cpp:41:42: error: converting to 'std::tuple<long long unsigned int, long long unsigned int, long long unsigned int, long long unsigned int, long long unsigned int>' from initializer list would use explicit constructor 'constexpr std::tuple< <template-parameter-1-1> >::tuple(_UElements&& ...) [with _UElements = {long long unsigned int, long long unsigned int, long long unsigned int, long long unsigned int, long long unsigned int}; <template-parameter-2-2> = void; _Elements = {long long unsigned int, long long unsigned int, long long unsigned int, long long unsigned int, long long unsigned int}]'
A[4] ^ A[9] ^ A[14] ^ A[19] ^ A[24]};
^
Upstream suggested to revert a commit while they work on a better fix.
The commit to revert was a fix for XCode on Clang 12, neither of which
apply to us in Buildroot, so we can indeed just carry that revert.
Fixes:
- http://autobuild.buildroot.org/results/4e86c3008aa70284a3002f426066fcc21d018e95
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: explain why we revert]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Fix CVE-2021-3928: vim is vulnerable to Stack-based Buffer Overflow
- Drop patch (already in version)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently when a tag is added to the Buildroot git tree, the gitlab-ci
create a pipeline with several hundred of jobs (~750) to build all
defconfigs and execute the Buildroot testsuite.
However, there is only a limited number of gitlab-ci runner (9 runners)
and some jobs reach the timeout limit (24h) while waiting for a runner
[1]. Indeed, the Buildroot project doesn't use the Gitlab's shared
runners.
In addition to the pipeline created when a new tag is added to the
git repository, two pipelines are created each weeks to execute the
Buildroot testsuite (on monday [2]) and build all defconfigs (on
Thursday [3]).
At some point there are too many jobs waiting in gitlab due board
defconfigs builds. Indded a board defconfig requires a lot of time
(~30min) compared to other jobs in order to build a toolchain and a
kernel linux along with a basic rootfs. There is currently 262
defconfigs.
This is even worse when several pipelines are trigged at the same
time (new git tag and scheduled pipeline trigger).
In order to reduce the number of long jobs, don't build board
defconfigs with pipelines trigged on tag, keeping only the runtime
tests and the Qemu's defconfigs.
[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/1758966541
[2] https://gitlab.com/buildroot.org/buildroot/-/pipelines/404035190
[3] https://gitlab.com/buildroot.org/buildroot/-/pipelines/401685550
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The pipewire-media-session has been moved into a separate package
which pipewire attempts to download via meson wraps if
session-managers are enabled, since we don't support meson wraps
we need to disable session-managers in the pipewire package and
create a new pipewire-media-session package.
We also need to add a patch removing an invalid session-managers
option check from pipewire-media-session.
There is an alsa with-module-sets option in pipewire-media-session,
however at the moment alsa is an unconditional dependency so
we need to always enable it and select alsa-lib.
Note: it was previously an option of the pipewire package, named
media-session, so the symbol was BR2_PACKAGE_PIPEWIRE_MEDIA_SESSION.
Now it is a package name pipewire-media-session, so the symbol is still
BR2_PACKAGE_PIPEWIRE_MEDIA_SESSION. So there is no legacy entry needed,
and users previously using that option will now get the package. Sneaky.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr:
- extend commit log with legacy handling
- first unconditional CONF_OPTS uses =, not +=; fits on one line
- slight reorder in variables assignments
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As found out by Yann [1], binutils will use its bundled copy of zlib,
whether it is already provided by the system or not, and unless
explicitly told to use the system zlib with --with-system-zlib, which
is available since version 2.21 and
https://github.com/bminor/binutils-gdb/commit/700d40ca16eb3ba1ecc1e602cb3eec175bdf70f0
This will fix the following build failure with oprofile when compiling
in a static configuration where zlib is not enabled:
checking for bfd_openr in -lbfd... no
checking for compress in -lz... no
configure: error: libz library not found; required by libbfd
As found out by Arnout [1], this fails infrequently because static is
already pretty rare, but in addition zlib is almost always selected by
some other package.
Fixes:
- http://autobuild.buildroot.org/results/0e1d16dfbb455a08db80ac5d35613908c3b4163f
[1] https://patchwork.ozlabs.org/project/buildroot/patch/20211030214734.2154583-1-fontaine.fabrice@gmail.com/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
- reword the explanations about the system zlib
- extend the oprofile example with static and !zlib
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We don't want to allow meson to download wrap dependencies as this
bypasses buildroot's dependency resolution.
This is badly documented in the meson manual, but there is at least
an FAQ that refers to it:
https://mesonbuild.com/FAQ.html#does-wrap-download-sources-behind-my-back
Meson has a option called wrap-mode which can be used to disable
wrap downloads altogether with --wrap-mode=nodownload.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr: add pointer to FAQ]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following lttng-tools build failure raised since bump of liburcu
to version 0.13.0 in commit 9cedbcf494 and
https://github.com/urcu/userspace-rcu/commit/109267f653502cf5ef5ada5d098167b9726daa2d:
In file included from ../../../src/common/error.h:16:0,
from directory-handle.c:9:
../../../src/common/error.h:44:25: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'struct'
extern DECLARE_URCU_TLS(struct log_time, error_log_time);
^
This is fixed by upstream
0003-Always-use-__thread-for-Thread-local-storage-except-on-MSVC.patch.
Also include upstream 0002-fix-don-t-use-C-thread_local-on-MacOs.patch
to avoid conflicts.
Fixes:
- http://autobuild.buildroot.org/results/70d645593c9e164d0d044da1b0128cda9c96e830
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
tpm2-tss is looking for systemd_sysusers and systemd_tmpfiles, but those
two are not mandatory. However, it might find those from the host.
But that is not an issue in the end, because they are only used to
instanciate the users and create the tmpfiles. At build time on the
host, we do not need them, and on the target, if systemd is being used,
then they will be instanciated/created at boot.
If they are not found, then the fallback paths are taken, and those
fallback paths are those using the setfacl and groupadd and useradd
tools, which we already know are going to fail but that we do not care.
So, we can safely force those two to =no to avoid the install trying to
use the system-wide tools, or even the ones we build as part of
host-systemd ourselves.
Eventually, when systemd-tmpfiles of systemd-sysusers are missing, the
fallback paths use useradd, and configure unconditionally checks for
it, so as for groupadd and setfacl in commits d9123dd799
(package/tpm2-tss: fix build on host without setfacl) and c8f847c4f4
(package/tpm2-tss: fix build on host without groupadd), we just fake the
detection of groupadd.
Fixes:
- http://autobuild.buildroot.org/results//97bfa8f7dcb12e36bd63c9d06fb39418070d840b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds the explanation for the genimage.cfg files coding standard.
A real standard is not defined upstream by the genimage utility
developers[1], but I try to give one here in Buildroot for consistency.
[1]: https://github.com/pengutronix/genimage
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes:
support/testing/tests/package/sample_python_unittest_xml_reporting.py:4:1: E302 expected 2 blank lines, found 1
support/testing/tests/package/sample_python_unittest_xml_reporting.py:8:1: E305 expected 2 blank lines after class or function definition, found 1
1 E302 expected 2 blank lines, found 1
1 E305 expected 2 blank lines after class or function definition, found 1
Signed-off-by: Pierre-Jean Texier <texier.pj2@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a defconfig for the Allwinner Nezha, a raspberrypi-style board built
around the RISC-V 64bit D1 SoC.
There is currently no upstream support, so use the git repos from Samuel
Holland as explained on the linux-sunxi wiki:
https://linux-sunxi.org/Allwinner_Nezha
The U-Boot DTB is also used by opensbi, but the two branches are
unfortunately not in sync at the moment, so add a patch to fix the
compatible for the PLIC so opensbi makes it available to S-Mode (Linux).
The use of the sun20i-d1-spl SPL bootloader / TOC1 file format also makes it
a bit more complicated to build the boot image. As this is expected to only
be a temporary issue, add a U-Boot patch to build the TOC1 image as part of
the build rather than adding explicit support in our U-Boot package to do
it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
U-Boot does not yet have SPL code to initialize the DDR controller on the
Allwinner D1 - So instead package the sun20i-d1-spl bootloader, which is
based on boot0 from the Allwinner BSP with some modifications to build it
separately from the BSP and boot mainline U-Boot as explained on the
linux-sunxi wiki:
https://linux-sunxi.org/Allwinner_Nezha
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For an unknown reason, the following build failure is raised on one of
the autobuilder with host gcc 6.3.0 since bump of autoconf to version
2.71 in commit ecd54b65c1:
icall.c: In function 'mono_create_icall_signatures':
icall.c:9513:20: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
gsize_a *types = (gsize*)(sig + 1);
^
Add an upstream patch to fix it.
Fixes:
- http://autobuild.buildroot.org/results/1d1d82b505abd16d014d754b6a4a48fb1271e3b6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
softhsm2 needs threads since the addition of the package in commit
53873b6dae to avoid the following build
failure:
osmutex.cpp:240:2: error: #error "There are no mutex implementations for your operating system yet"
240 | #error "There are no mutex implementations for your operating system yet"
| ^~~~~
While at it, fix a typo in comment
Fixes:
- http://autobuild.buildroot.org/results/40a8c2d9f58fbe490b6832754fdf8ac4ee0804fc
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised since the addition of the package
in commit 53873b6dae:
OSSLDES.cpp: In member function 'virtual const EVP_CIPHER* OSSLDES::getCipher() const':
OSSLDES.cpp:81:12: error: 'EVP_des_cbc' was not declared in this scope; did you mean 'EVP_sm4_cbc'?
81 | return EVP_des_cbc();
| ^~~~~~~~~~~
| EVP_sm4_cbc
Fixes:
- http://autobuild.buildroot.org/results/27d471c4ad1cdd5f2332b949f71cba86723d349f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.org/results/eab44622f8d8ff4fbf464b5a98856382f019c2cb/
Since the bump to 3.1.0 in commit 470e2e9bc5 (package/tpm2-tss: bump
version to 3.1.0), the install is borked because it is looking for
programs at configure time, so it finds those on the host if they exist,
or do not find any at all, which can very well differ from what will be
present on the target.
But this is not totally unreasonable: there is no way, at cross-configure
time, for a package to find the tools that will be present at runtime.
All that can be done in such a case is to force the path to such tools.
However, in this case, tpm2-tss only uses setfacl if systemd-tmpfiles is
not available. If the call to setfacl fails, the install does not fail
(split on two lines for readability):
@-$(call make_fapi_dirs) && $(call set_fapi_permissions) \
|| echo "WARNING Failed to create the FAPI directories with the correct permissions"
set_fapi_permissions is a macro that eventually expands to:
(chown -R tss:tss "$1") && \
(chmod -R 2775 "$1") && \
(setfacl -m default:group:tss:rwx "$1")
So the call to setfacl will not even be ever attempted, because the
chown will fail first. Furthermore, it would look for the 'tss' username
and groupname from the host, which could differ from those on the
target.
So we can just fake the fact that setfacl is available.
As for the permissions, they are to be set on a directory that is in
${runstatedir}, i.e. /run, which is a tmpfs, so there is no way we can
prepare them at build time. We'd need a startup script or systemd unit,
or proper systemd-tmpfiles support, either of which can be done in a
followup patch by an interested party...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Yair Ben-Avraham <yairba@protonmail.com>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
According to buildroot requirements set custom uboot
version instead of relying on the newest one.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure raised since bump to version 0.3.39 in
commit d9796f2db9:
In file included from /home/giuliobenetti/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/include/signal.h:318,
from ../spa/include/spa/utils/defs.h:34,
from ../spa/include/spa/utils/type.h:32,
from ../spa/include/spa/support/log.h:34,
from ../spa/plugins/support/cpu.c:37:
../spa/plugins/support/cpu.c: In function 'impl_init':
../spa/plugins/support/cpu.c:88:33: error: called object is not a function or function pointer
88 | #define impl_cpu_zero_denormals NULL
| ^~~~
Fixes:
- http://autobuild.buildroot.org/results/eaf255c46b10cbb6b8a629bc15acf7772d5e274b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This option only exists in main and is not in a release.
Fixes:
output/build/weston-9.0.0/meson.build:1:0: ERROR: Unknown options: "launcher-libseat"
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This package is the userspace daemon, client tool, and library for the
team device implementation in the Linux kernel. Team is an alternative
to the traditional bonding driver and provides more "runners", or modes,
of operation for aggregates. None of these modes are enabled by default
and need a custom kernel config.
Backported the three most relevant patches to fix musl build, revert of
a fix prior to 1.31 that can cause high CPU load, and a fix to prevent
failing to stop the daemon due to too short timeout for kill command.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
[yann.morin.1998@free.fr: slight reword in help text]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump U-Boot to 2021.10 and kernel to version 5.14.14.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop arm fix patch that is now upstream.
Dbus is now an optional dependency for pipewire.
Add pipewire-v4l2 config option.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Based on initial work from Nicolas Carrier
<nicolas.carrier@orolia.com>, with the following additions:
- Updated to a newer version
- Added proper license file handling
- Added runtime test case
- Restricted to Python 3.x
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
dahdi-linux needs a linux with CRC CCITT since the addition of the
package in commit d959966b41 as stated in
the README:
- CONFIG_CRC_CCITT must be enabled ('y' or 'm'). On 2.6 kernels this can
be selected These can be selected from the "Library Routines" submenu
during kernel configuration via "make menuconfig".
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2021-40114: Multiple Cisco products are affected by a
vulnerability in the way the Snort detection engine processes ICMP
traffic that could allow an unauthenticated, remote attacker to cause a
denial of service (DoS) condition on an affected device. The
vulnerability is due to improper memory resource management while the
Snort detection engine is processing ICMP packets. An attacker could
exploit this vulnerability by sending a series of ICMP packets through
an affected device. A successful exploit could allow the attacker to
exhaust resources on the affected device, causing the device to reload.
https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-snort-dos-s2R7W9UUhttps://www.snort.org/downloads/snort/changelog_2.9.18.1.txt
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
OpenJDK 17 is a new LTS release, which leaves the Buildroot Config option of
"LTS" and "LATEST" as a misnomer because both 11 and 17 are LTS releases.
There are two options in this case:
1) Remove "LATEST" and update OpenJDK 11 to 17, and only support 17.
2) Change "LTS" to "11" and "LATEST" to "17" and only support the latest 2 LTS
OpenJDK releases.
After some discussion with Thomas Petazzoni and Peter Korsgaard, and testing,
option 2 is the best course of action for a few reasons:
- OpenJDK 11 and 17 have very long support cycles:
- OpenJDK 11 has two years of Active and five years of security support left.
- OpenJDK 17 has five years of Active and ten years of security support left.
- Both OpenJDK versions build with the same parameters.
- The maintenance cost of both versions is meager.
- Both versions pass tests.package.test_openjdk without issue.
Changes:
- Change BR2_OPENJDK_VERSION_LATEST -> BR2_OPENJDK_VERSION_17
- Change BR2_OPENJDK_VERSION_LTS -> BR2_OPENJDK_VERSION_11
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Peter: add Config.in.legacy, use BR2_PACKAGE_OPENJDK_ prefix]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go1.17.3 (released 2021-11-04) includes security fixes to the archive/zip and
debug/macho packages, as well as bug fixes to the compiler, linker, runtime, the
go command, the misc/wasm directory, and to the net/http and syscall packages.
https://golang.org/doc/devel/release#go1.17.minor
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised since bump of autoconf to version
2.71 in commit ecd54b65c1 and
http://git.savannah.gnu.org/gitweb/?p=autoconf.git;a=commit;h=ec90049dfcf4538750e61d675d885157fa5ca7f8:
checking for /home/buildroot/autobuild/instance-0/output-1/host/bin/mips-linux-gnu-gcc options needed to detect all undeclared functions... cannot detect
configure: error: in `/home/buildroot/autobuild/instance-0/output-1/build/boinc-7.16.18':
configure: error: cannot make /home/buildroot/autobuild/instance-0/output-1/host/bin/mips-linux-gnu-gcc report undeclared builtins
This error raised because AC_CHECK_DECLS returns an error due to -mavx
flag:
mips-linux-gnu-gcc: error: unrecognized command line option '-mavx'
To fix this build failure, hard code ac_cv_c_undeclared_builtin_options
to 'none needed' as removing '-mavx' from CPPFLAGS will hinder the
detection of xgetbv, xgetbv, __xgetbv, cpuid, _cpuid and __cpuid
Fixes:
- http://autobuild.buildroot.org/results/4b468a5d3bfbff9638316ca930ef791867774aef
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the wrong assumption that six is not a dependency with python3 made
in commit 95a63a34ac to avoid the
following build failure with ca-certificates:
Traceback (most recent call last):
File "/home/buildroot/autobuild/instance-2/output-1/build/ca-certificates-20211016/mozilla/certdata2pem.py", line 31, in <module>
from cryptography import x509
File "/home/buildroot/autobuild/instance-2/output-1/host/lib/python3.9/site-packages/cryptography/x509/__init__.py", line 7, in <module>
from cryptography.x509 import certificate_transparency
File "/home/buildroot/autobuild/instance-2/output-1/host/lib/python3.9/site-packages/cryptography/x509/certificate_transparency.py", line 10, in <module>
import six
ModuleNotFoundError: No module named 'six'
Fixes:
- http://autobuild.buildroot.org/results/2b6872eec31362bf3edf88c69b67d681b2f016aa
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: James Hilliard <james.hilliard1@gmail.com>
Tested-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
His e-mail is no longer responding:
** Address not found **
Your message wasn't delivered to mirza.krak@northern.tech because the address couldn't be found, or is unable to receive mail.
Learn more here: https://support.google.com/mail/?p=NoSuchUser
The response from the remote server was:
550 5.1.1 The email account that you tried to reach does not exist. Please try double-checking the recipient's email address for typos or unnecessary spaces. Learn more at https://support.google.com/mail/?p=NoSuchUser bi21si292758edb.0 - gsmtp
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Build of nano with uclibc < 1.0.35 is broken since bump to version 5.9
in commit 3e62e9b14b:
In file included from ./sys/random.h:40,
from getrandom.c:22:
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/x86_64-buildroot-linux-uclibc/sysroot/usr/include/sys/random.h:27:35: error: unknown type name 'size_t'
27 | extern int getrandom(void *__buf, size_t count, unsigned int flags)
| ^~~~~~
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/x86_64-buildroot-linux-uclibc/sysroot/usr/include/sys/random.h:8:1: note: 'size_t' is defined in header '<stddef.h>'; did you forget to '#include <stddef.h>'?
7 | #include <features.h>
+++ |+#include <stddef.h>
8 |
Fixes:
- http://autobuild.buildroot.org/results/1932c524aa6b6a3337a0fc21b44adaac60972d30
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
p11-kit is an optional dependency which is enabled by default since the
addition of the package in commit
53873b6dae and softhsm2 needs help to
properly install files:
/usr/bin/install -c -m 644 softhsm2.module '/home/buildroot/autobuild/instance-0/output-1/host/nios2-buildroot-linux-gnu/sysroot/home/buildroot/autobuild/instance-0/output-1/host/bin/../nios2-buildroot-linux-gnu/sysroot/usr/share/p11-kit/modules'
[...]
softhsm2: installs files in /home/buildroot/autobuild/instance-0/output-1/host/nios2-buildroot-linux-gnu/sysroot//home/buildroot/autobuild/instance-0/output-1
package/pkg-generic.mk:330: recipe for target '/home/buildroot/autobuild/instance-0/output-1/build/softhsm2-2.6.1/.stamp_staging_installed' failed
Fixes:
- http://autobuild.buildroot.org/results/a05bb71cfe016f793c89b2a035835718836039c8
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Upstream has .sha256 checksums now, drop redundant .md5
- Upstream has dropped RSRR support, drop Config.in support
- Add BR2_PACKAGE_MROUTED_RSRR to Config.in.legacy
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add firmware for Realtek 8152/8153/8156 based USB Ethernet adapters.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Other changes:
- Drop depends on !BR2_PACKAGE_UBOOT_TOOLS_FWPRINTENV as mender-grubenv no
longer uses fw_printenv and fw_setenv and instead provides
grub-mender-grubenv-print and grub-mender-grubenv-set
- Update the LICENSE hash as the year has changed.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Other changes:
- Update license files hash due to the progressbar library changing versions
from v0.0.2 to v0.0.3
- Remove HOST_MENDER_ARTIFACT_BUILD_TARGETS = cli/mender-artifact as
commit a79edc3e7632f38de0dfeaa5a3c72567318e8079 removed the
cli/mender-artifact directory.
- Change -X main.Version= to
-X github.com/mendersoftware/mender-artifact/cli.Version
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This file adds a DBus endpoint for the UpdateControlMap, which allows a user
to set the ID and Priority of a given update process
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add Giulio Benetti to all Olimex Allwinner boards' defconfigs since I've
recently updated and tested them all and I'd like to receive possible
build failure from gitlab CI/CD.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since I'm the upstream maintainer, it'd be nice to get Cc:ed on any
issues with the package.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Change the comment so it doesn't need to be updated when changing the
version.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BLK_DEV_IDE_PMAC driver has been removed from the kernel, so use the
libata replacement PATA_MACIO. This requires enabling ATA and BLK_DEV_SD
for the disk to show up, and changing the command line to use /dev/sda.
YENTA depends on PCCARD, so enable it.
The UART does not show up in /dev without DEVTMPFS.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit
40bb37bd70 ("utils/getdeveloperlib.py:
use relative paths for files"), the Developer class was changed to use
relative paths, including for its .hasfile() method.
However the check_developers() function of getdeveloperlib.py was not
updated accordingly, and continued to pass absolute paths. This caused
"get-developers -c" to return the entire list of files in Buildroot as
being unmaintained, as none of them were matching the file listed in
the DEVELOPERS file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In Python 3.x, check_output() returns a "bytes" array, and not a
string. Its result needs to be decoded to be turned into a
string. Without this fix, "get-developers -c" bails out with:
Traceback (most recent call last):
File "/home/thomas/projets/buildroot/./utils/get-developers", line 105, in <module>
__main__()
File "/home/thomas/projets/buildroot/./utils/get-developers", line 53, in __main__
files = getdeveloperlib.check_developers(devs)
File "/home/thomas/projets/buildroot/utils/getdeveloperlib.py", line 280, in check_developers
files = subprocess.check_output(cmd).strip().split("\n")
TypeError: a bytes-like object is required, not 'str'
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues:
- CVE-2021-25219: Lame cache can be abused to severely degrade resolver
performance
For details, see the advisory:
https://kb.isc.org/docs/cve-2021-25219
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This option is only available in master and not any release.
Fixes:
output/build/libpsl-0.21.1/meson.build:1:0: ERROR: Unknown options: "docs"
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Acked-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add configuration switch BR2_PACKAGE_OPTEE_CLIENT_RPMB_EMU to define
whether RPMB emulation is enabled or not. It is default enabled for
backward compatibility.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Restore support for BR2_STATIC_LIBS in optee-client, removed by
[1] to overcome an issue introduced in OP-TEE 3.13.0 that mandates
support for shared libraries.
As OP-TEE expects to be functional on OSes without dynamic shared
library support, change [2] was merged in OP-TEE tag 3.15.0 to fix the
initial issue introducing new configuration switch CFG_TEE_SUPP_PLUGIN.
When disabled, optee-client plugin support is not embedded and
optee-client can built with static libraries support only.
Link: [1] commit 321a850bc7 ("package/optee-client: add dependency on !BR2_STATIC_LIBS")
Link: [2] https://github.com/OP-TEE/optee_client/commit/f59114370f267f0b3341870b6cf1e1c88d184b3f
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Remove efi-ldsdir meson config option which is no longer used.
Meson config variable systemd-analyze is renamed to analyze.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Remove python3-requests host package and combine with python-requests.
Make packages depending on host-python3-requests depend on
host-python-requests instead.
Drop idna patch that is now upstream.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch adds support for watchdogd, a watchdog daemon with built-in
process supervisor[1] as well as support for monitoring memory & file
descriptor leaks, and CPU load average. When a monitored resource
reaches a high watermark, a warning message is logged and when critical
level is reached, the cause is saved and the system is rebooted. On
reboot the reset cause can be retrieved to help locate the culprit.
Support for SysV init script in this patch, and systemd unit file is
installed from the one bundled with the package. Both files supoort
additional command line options in /etc/default/watchdogd.
The Config.in is slightly big, but allows for disabling or adjusting
the poll interval for each resource monitor.
For more information, see https://github.com/troglobit/watchdogd
[1]: processes must have their main loop instrumented for supervision.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The current documentation was poorly organized, with for example the
"Here is an example walk through of running a test case" sentence
followed by the explanation of how to list available test cases, but
not how to run one.
Many other aspects of the wording were confusing, or not really
accurate.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The directory that containts tests is "support/testing/tests/", not
"supporting/testing/test".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The current Gitlab CI mechanism allows to trigger all tests in a CI
pipeline by pushing a branch named <something>-runtime-tests, or to
trigger a single test in a CI pipeline by pushing a branch name
<something>-tests.<name of test>.
However, there are cases where it is useful to run a suite of tests,
for example to run all tests in tests.init.test_busybox.
This commit makes that possible by extending the current semantic of
<something>-tests.<name of test> to not expect a complete test name,
but instead to accept all tests that starts with the given pattern.
This allows to do:
git push gitlab HEAD:foobar-tests.init.test_busybox.TestInitSystemBusyboxRo
like it was the case before. But it now also allows to do:
git push gitlab HEAD:foobar-tests.init.test_busybox
to run all Busybox tests.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
kmscube requires a libgbm implementation, which until now, only Mesa3D
was providing, so kmscube had a direct dependency on Mesa3D.
However, now that we have a proper libgbm virtual package, so this
commit converts the kmscube package to use the libegl, libgbm and
libgles virtual packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
[ Kamel : add dependency on recent libgbm ]
[Arnout: fix syntax of Config.in comment; order depends alphabetically]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Introduce gbm features so that each packages depending
on it can choose which implementation is required.
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since 18.0-Leia, Kodi implements stand-alone gbm support alongside x11 &
wayland. To enable building libgbm in mesa3d without x11 & wayland we
need to create a virtual package for libgbm.
Also other packages besides mesa3d may provide libgbm.so, see
http://patchwork.ozlabs.org/patch/647235/http://patchwork.ozlabs.org/patch/939703/
It turns out that libgbm has seen several additions in its API over
time, and therefore not all libgbm implementations provide support for
all features. In order to account for this, this commit adds two hidden
boolean options that allow libgbm providers to indicate which optional
features they support:
BR2_PACKAGE_LIBGBM_HAS_FEATURE_FORMAT_MODIFIER_PLANE_COUNT and
BR2_PACKAGE_LIBGBM_HAS_FEATURE_DMA_BUF. These booleans must be selected
by the packages providing libgbm implementations, and depended on by
packages using libgbm.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
[ Kamel : introduce gbm api features ]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Linux supports No-MMU RISC-V 64-bits since kernel version 5.8. Make
MMU optional to enable building for RISC-V 64-bits boards that do not
have one. MMU use of RISC-V 32-bits builds remains mandatory for now.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using *-uclinux-* seems like an only partially followed convention.
And at least RISC-V 64-bits gcc does not know about uclinux tuples.
So switch back to the normal "linux" one for now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[Damien]
* Make the change conditional on BR2_RISCV_64 being "y".
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enable selecting elf2flt for RISC-V 64-bits no MMU builds and add
support for it in the form of an additional patch (upstream pull request
https://github.com/uclinux-dev/elf2flt/pull/22).
Also modify the package Makefile.in file to add the -fPIC option to
the target CFLAGS for RISC-V 64-bits no MMU builds.
This patch is based on initial work by Christoph Hellwig <hch@lst.de>.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When BR2_BINFMT_FLAT_ONE is selected, elf2flt must be invoked with the
"-r" option to ensure that a single contiguous binary image is created,
regardless of the architecture default image format implemented by
elf2flt.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch adds a package for softhsm2.
Signed-off-by: José Pekkarinen <jose.pekkarinen@unikie.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes:
output/build/pango-1.48.10/meson.build:1:0: ERROR: Unknown options: "use_fontconfig"
(WARNING for now, but will be an error in meson 0.60.0).
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes:
output/build/gst1-vaapi-1.18.5/meson.build:1:0: ERROR: Unknown options: "test"
(WARNING for now, but will be an error in meson 0.60.0).
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes:
output/build/gst1-plugins-ugly-1.18.5/meson.build:1:0: ERROR: Unknown options: "examples"
(WARNING for now, but will be an error in meson 0.60.0).
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix teletextdec name and remove vdpau which is no longer available.
Fixes:
output/build/gst1-plugins-bad-1.18.5/meson.build:1:0: ERROR: Unknown options: "teletextdec, vdpau"
(WARNING for now, but will be an error in meson 0.60.0).
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
During LTP and/or kernel development it's very rare that I want the
Open POSIX and the realtime tests. Open POSIX in particular takes
considerable time to build. So this adds the option of disabling them.
They default to on so as not to break existing test automation.
Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Cc: io@richiejp.com
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
While at it, remove the md5 hash as there is already a sha256 hash.
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a rudimentary test inspired from the "Using boto3" section in
the package README ([1]).
Note that it doesn't try to do anything with the instanciated
resource, as this would require a network connection when the test
runs.
[1]: https://github.com/boto/boto3
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
While at it, remove the md5 hash as there is already a sha256 hash.
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The newly-added test uncovered some missing core modules, so add them
now.
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a rudimentary test inspired from the "Using botocore" section in
the package README ([1]).
Note that it doesn't try to use the instantiated client, as this would
require a network connection when the test runs.
[1]: https://github.com/boto/botocore
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
On some developers machines, the default timeout (5 seconds) is not
enough for the test to succeed.
Increase it to 20 seconds, to let more time for the rsa keys to be
generated.
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The patch [1], which is required for DRM to work properly, has been
merged into Linux version 5.14-rc3. There's a 5.14.12 now in stable, so
I took that one.
After Linux boots, /dev/fb0 will be accessible. You can control the
brightness of the display after enabling the framebuffer by running the
following commands:
~ # echo 0 0 > /sys/class/graphics/fb0/pan
~ # echo 255 >/sys/class/backlight/40016c00.dsi.0/brightness
The brightness ranges from 0 to 255, as you can see running the
command:
~ # cat /sys/class/backlight/40016c00.dsi.0/max_brightness
[1] 24b5b1978cd5 ("clk: stm32f4: fix post divisor setup for I2S/SAI PLLs")
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Acked-by: Christophe Priouzeau <christophe.priouzeau@foss.st.com>
[Arnout: add explanation to readme.txt]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Fix CVE-2021-27347: Use after free in lzma_decompress_buf function in
stream.c in Irzip 0.631 allows attackers to cause Denial of Service
(DoS) via a crafted compressed file.
- Fix CVE-2021-27345: A null pointer dereference was discovered in
ucompthread in stream.c in Irzip 0.631 which allows attackers to cause
a denial of service (DOS) via a crafted compressed file.
- Fix CVE-2020-25467: A null pointer dereference was discovered
lzo_decompress_buf in stream.c in Irzip 0.621 which allows an attacker
to cause a denial of service (DOS) via a crafted compressed file.
- lz4 is a mandatory dependency since version 0.640 and
https://github.com/ckolivas/lrzip/commit/3345a239b7f5353a1c1296d6a5d6b90729d4b669https://github.com/ckolivas/lrzip/compare/7f3bf46203bf45ea115d8bd9f310ea219be88af4...v0.641
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
qemu now requires gcc >= 7.5, which was the last release in the 7.x
series. We do not have symbols for a gcc dot-version dependency, nor do
we want to add one.
So, add a dependency on gcc >= 8, for both the host and target variants.
In addition:
- Add a missing comment in package/qemu/Config.in.host explaining the
host gcc requirements if host gcc < 8.
Fixes:
http://autobuild.buildroot.org/results/32b7fee1f8cda2290fd4bd8ac9fe78bacb25b652
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr:
- target qemu also impacted
- propagate to libvirt, gst1-python
- reword commit log that 7.5 is the last 7.x release
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop second patch (already in version)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop python3-pip now that python3-cryptography has been removed
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
python3-cryptography is not needed anymore now that python-cryptography
has a host variant
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since commit 0c7e30b43a,
python-cryptography depends on python3. So python3-cryptography became
redundant at that point. As python3-cryptography is a host-only package,
while python-cryptography is a python-only package, add a host variant
to python-cryptography to be able to drop python3-cryptography.
Update ca-certificates to use host-python-cryptography instead of
host-python3-cryptography.
While at it, drop host-python3-pip and host-python3-six as these
dependencies are not needed. Indeed, pip was never a dependency of
cryptography and six is not a dependency with python3 and will be
dropped in version 3.4 and
https://github.com/pyca/cryptography/commit/e66db8079d3fbd0110e87ece1fd48f4bfd9e48b9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
squash! package/python-cryptography: add host variant
- Remove upstreamed patches
- Add BR2_PACKAGE_PYTHON_CERTIFI and BR2_PACKAGE_QHULL as dependencies
- make DEPENDENCIES one per line and sort alphabetically
- Add a new file: setup.cfg. This file is needed to force matplotlib to use
the system-provided freetype and qhull, and to disable lto.
The setup.cfg file is copied to the source directory before configuring.
LTO must be disabled or else compile errors such as:
"Relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `_ZSt3hexRSt8ios_base'
which may bind externally can not be used when making a shared object;
recompile with -fPIC"
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
LICENSE copyright year was updated.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Replace BR2_PYTHON3_HOST_DEPENDENCY by host-python3 to avoid the
following build failure raised since bump to version 1.17 in commit
32b2a03745:
Traceback (most recent call last):
File "../py/makeversionhdr.py", line 117, in <module>
make_version_header(sys.argv[1])
File "../py/makeversionhdr.py", line 79, in make_version_header
info = get_version_info_from_docs_conf()
File "../py/makeversionhdr.py", line 67, in get_version_info_from_docs_conf
for line in f:
File "/usr/lib/python3.5/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0xc2 in position 2154: ordinal not in range(128)
Indeed, this build failure is not reproduced by host-python3 (in version
3.9.7) so it is probably an issue with python 3.5 (which is 6-years old).
Fixes:
- http://autobuild.buildroot.org/results/96f7b81f5d14715b0b6673a8016a31e9e1552d0b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- disable doc generation (via sphinx) for host build
Reduces host-qemu build time from (on a system with sphinx installed):
real 2m5,522s
user 9m41,292s
sys 1m9,732s
to:
real 1m9,183s
user 8m40,131s
sys 1m9,533s
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
gnuradio suffers from gcc bug 43744 but gqrx that depends on it doesn't
take into account the gcc bug. So let's add it as:
'depends on !BR2_TOOLCHAIN_HAS_GCC_BUG_43744 # gnuradio'
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes the following security issues:
16.15.0:
- ASTERISK-29057: pjsip: Crash on call rejection during high load
16.15.1:
- AST-2020-003: Remote crash in res_pjsip_diversion
A crash can occur in Asterisk when a SIP message is received that has a
History-Info header, which contains a tel-uri.
https://downloads.asterisk.org/pub/security/AST-2020-003.pdf
- AST-2020-004: Remote crash in res_pjsip_diversion
A crash can occur in Asterisk when a SIP 181 response is received that has
a Diversion header, which contains a tel-uri.
https://downloads.asterisk.org/pub/security/AST-2020-004.pdf
16.16.0:
- ASTERISK-29219: res_pjsip_diversion: Crash if Tel URI contains History-Info
16.16.1:
- AST-2021-001: Remote crash in res_pjsip_diversion
If a registered user is tricked into dialing a malicious number that sends
lots of 181 responses to Asterisk, each one will cause a 181 to be sent
back to the original caller with an increasing number of entries in the
“Supported” header. Eventually the number of entries in the header
exceeds the size of the entry array and causes a crash.
https://downloads.asterisk.org/pub/security/AST-2021-001.pdf
- AST-2021-002: Remote crash possible when negotiating T.38
When re-negotiating for T.38 if the initial remote response was delayed
just enough Asterisk would send both audio and T.38 in the SDP. If this
happened, and the remote responded with a declined T.38 stream then
Asterisk would crash.
https://downloads.asterisk.org/pub/security/AST-2021-002.pdf
- AST-2021-003: Remote attacker could prematurely tear down SRTP calls
An unauthenticated remote attacker could replay SRTP packets which could
cause an Asterisk instance configured without strict RTP validation to
tear down calls prematurely.
https://downloads.asterisk.org/pub/security/AST-2021-003.pdf
- AST-2021-004: An unsuspecting user could crash Asterisk with multiple
hold/unhold requests
Due to a signedness comparison mismatch, an authenticated WebRTC client
could cause a stack overflow and Asterisk crash by sending multiple
hold/unhold requests in quick succession.
https://downloads.asterisk.org/pub/security/AST-2021-004.pdf
- AST-2021-005: Remote Crash Vulnerability in PJSIP channel driver
Given a scenario where an outgoing call is placed from Asterisk to a
remote SIP server it is possible for a crash to occur.
https://downloads.asterisk.org/pub/security/AST-2021-005.pdf
16.16.2:
- AST-2021-006: Crash when negotiating T.38 with a zero port
When Asterisk sends a re-invite initiating T.38 faxing and the endpoint
responds with a m=image line and zero port, a crash will occur in
Asterisk.
This is a reoccurrence of AST-2019-004.
https://downloads.asterisk.org/pub/security/AST-2021-006.pdf
16.17.0:
- ASTERISK-29203 / AST-2021-002 — Another scenario is causing a crash
- ASTERISK-29260: sRTP Replay Protection ignored; even tears down long calls
- ASTERISK-29227: res_pjsip_diversion: sending multiple 181 responses causes
memory corruption and crash
16.19.1:
- AST-2021-007: Remote Crash Vulnerability in PJSIP channel driver
When Asterisk receives a re-INVITE without SDP after having sent a BYE
request a crash will occur. This occurs due to the Asterisk channel no
longer being present while code assumes it is.
https://downloads.asterisk.org/pub/security/AST-2021-007.pdf
- AST-2021-008: Remote crash when using IAX2 channel driver
If the IAX2 channel driver receives a packet that contains an unsupported
media format it can cause a crash to occur in Asterisk.
https://downloads.asterisk.org/pub/security/AST-2021-008.pdf
- AST-2021-009: pjproject/pjsip: crash when SSL socket destroyed during
handshake
Depending on the timing, it’s possible for Asterisk to crash when using a
TLS connection if the underlying socket parent/listener gets destroyed
during the handshake.
https://downloads.asterisk.org/pub/security/AST-2021-009.pdf
16.20.0:
- ASTERISK-29415: Crash in PJSIP TLS transport
- ASTERISK-29381: chan_pjsip: Remote denial of service by an authenticated
user
In addition, a large number of bugfixes.
Drop now upstreamed
0006-AC_HEADER_STDC-causes-a-compile-failure-with-autoconf-2-70.patch.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bumps to linux 5.14.13, linux-headers 5.14 and u-boot version
2021.10 and drop local uboot patch where CONFIG_SYS_BOOTM_LEN was set to
16MB because on u-boot 2021.10 it's now set to 64MB as default to make
room for Linux images.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bumps to linux 5.14.13, linux-headers 5.14 and u-boot version
2021.10 and drop local uboot patch where CONFIG_SYS_BOOTM_LEN was set to
16MB because on u-boot 2021.10 it's now set to 64MB as default to make
room for Linux images.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- the last version bump of package/python-cffi (790c10d) ignored
the comment 'Please keep in sync with package/python3-cffi/python3-cffi.mk',
so catch up now
Fixes:
ERROR: No hash found for cffi-1.14.2.tar.gz
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When creating the image we are using the target modules. Building
the modules for host is then unnecessary.
Lets configure host Grub2 for the 'none' platform.
Note that this still installs a platform-dependent file:
.../host/lib/grub/i386-pc/config.h
This file does not seem to have much purpose, but it is harmless.
We did not care to provide a post-isntall hook to remove it.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch updates the location of cdboot.img used, to select the one
from the target directory and not from the host.
The host-grub2 is built only to have access to the Grub tools binaries.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds the calls to MESSAGE, to explicit the different step of
the per-platform builds, following the current tuple loop. Besides a
nicer output to the user, this can also help debug what step actualy
failed.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch cleans the code by removing unnecessary \-continuations.
It replaces the semi-colons by either && or separate lines.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The tools were not installed anymore since we move from autotools to
generic-package. This patch fixes their installation.
We have decided to implement the install tool process by running the "make
install" command for each tuple. This allows to have all different
platforms Grub modules installed in the target. The drawback is the
overwrite of Grub2 binaries tools during each "make install" command. This
drawback is absolutely not important as it happens in the same package. This is
the best option to avoid unnecessary and more complexity to this package.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A simple test that runs nmap twice to create the files scanme-1.xml and
scanme2.xml, then runs pyndiff on both files.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The ndiff package provided by Nmap relies on python2; moreover, there
have been pending pull requests to move ndiff to python3 for over two
years with very little engagement by the maintainers
(https://github.com/nmap/nmap/pull/1807).
Remove the option to select ndiff altogether, it is replaced by
python-pyndiff, which provides the same functionality (and more) as the
ndiff provided by nmap, and is compatible with python3.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This package is a dependency for pyndiff
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Canfestival hasn't seen a patch since November of 2017, and it requires python2
to build. Remove the package.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In addition:
- Remove upstream patch
- Update license hash to reflect license version bump from 0.92 to 0.93
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This fixes a regression introduced in 0.59.0 which prevents gcr from compiling
UI support with the following error:
meson.build:225:5: ERROR: Tried to create target "@BASENAME@_merge",
but a target of that name already exists.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Changes include:
- Remove the dependency on Python2, as nodejs 14 supports Python 3.
- Remove --without-snapshot as it's no longer a supported config
option.
- Remove /openssl to the shared-openssl-includes config option, as the
build system automatically appends /openssl to the includes path.
- License file changes:
- Removed deps/http_parser (MIT)
- Removed deps/node-inspect (MIT)
- Updated some URLs and license years
Since the removed parts are MIT like NodeJS itself, the license info
doesn't change.
- Add a qemu wrapper. V8's JIT infrastructure requires binaries such
as mksnapshot and mkpeephole to be run in the host during the build.
However, these binaries must have the same bit-width as the target
(e.g. a x86_64 host targeting ARMv6 needs to produce a 32-bit
binary). To work around this issue, cross-compile the binaries for
the target and run them on the host with QEMU, much like
gobject-introspection.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Arnout:
- use exec in qemu-wrapper script;
- remove s390x support - qemu doesn't have it.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The pkg-stats script queries release-monitoring.org to find the latest
upstream versions of our packages. However, up until recently,
release-monitoring.org had no notion of stable
vs. development/release-candidate versions, so for some packages the
"latest" version was in fact a development/release-candidate version
that we didn't want to package in Buildroot.
However, in recent time, release-monitoring.org has gained support for
differentiating stable vs. development releases of upstream
projects. See for example
https://release-monitoring.org/project/10024/ for the glib library,
which has a number of versions marked "Pre-release".
The JSON blurb returned by release-monitoring.org has 3 relevant
fields:
- "version", which we are using currently, which is a string
containing the reference of the latest version, including
pre-release.
- "versions", which is an array of strings listing all versions,
pre-release or not.
- "stable_versions", which is an array of string listing only
non-pre-release versions. It is ordered newest first to oldest
last.
So, this commit changes from using 'version' to using
'stable_versions[0]'.
As an example, before this change, pkg-stats reports that nfs-utils
needs to be bumped to 2.5.5rc3, while after this patch, it reports
that nfs-utils is already at 2.5.4, and that this is the latest stable
version (modulo an issue where Buildroot has 2.5.4 and
release-monitoring.org has 2-5-4, this will be addressed separately).
Note that part of this change was already done in commit f7b0e0860, but
it was incomplete.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The pkg-stats scripts tries to match packages against
release-monitoring.org in two ways:
- First by using the "Buildroot" distribution registered on
release-monitoring.org, in which we have added a lot of mappings
between Buildroot package names and release-monitoring.org package
names. If there is a match using this distribution, the package
status is RM_API_STATUS_FOUND_BY_DISTRO, which means that the
resulting HTML has a "found by distro" statement.
- Then, if the first solution didn't work, by using the pattern
matching, as done in the check_package_get_latest_version_by_guess()
function.
However, there is a bug in this later case: it sets the package status
to RM_API_STATUS_FOUND_BY_DISTRO as well, while it should have been
RM_API_STATUS_FOUND_BY_PATTERN. Due to this bug, in the resulting HTML
file from a pkg-stats run, all packages are marked as "found by
distro" even the ones that are "found by guess".
This commit fixes that by setting the correct package status.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Because upstream was inactive, we switched to the moonjit fork in commit
2ca0accc. Now, the moonjit fork is abandonned and Mike Pall resumed
their activity on LuaJIT. Therefore, we can move back to mainline.
There is no new upstream release yet, so take a commit from git. The
official site https://luajit.org/git/luajit.git doesn't offer tarball
downloads, so use the github mirror instead.
The moonjit part is no longer in the COPYRIGHT file (obviously). Also,
compared to the 2.0.5 release, the URLs in the file have been changes to
https. Therefore, the hash is updated.
Also, switch the hash file to two spaces.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In commit 689b9ac439 (package/rpi-firmware: rework boot/config file
handling), a last-minute fixup was made to handle the case where no
config.txt file was provided by the user.
However, the intermediate variable RPI_FIRMWARE_CONFIG_FILE was not used
consistently, and the old PACKAGE_RPI_FIRMWARE_CONFIG_FILE variable was
still used where RPI_FIRMWARE_CONFIG_FILE should have been used instead.
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr: blame myself for the mess; reword commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
For example with libpng: 1.6.37 instead of 1.7.0beta89
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[yann.morin.1998@free.fr: coalesce into a single line]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A new CPE ID was assigned by NIST and this whitelist can be
dropped as the package is setup to use the correct CPE (Not
to be confused with the other lightning-* packages which show
up when a free txt search is used to find the CVE.)
This reverts commit 613953f821.
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Matthew Weber <matthew.weber@collins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A recent update of flake8 in CI introduced a new check E741. It
basically checks that variables are at least 3 characters long. Up to
now, however, we have used shorter names in some places - all of them
turn out to be "l" for a line of text.
Replace all those "l" variables with "line".
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/1687009829
partially:
support/scripts/boot-qemu-image.py:47:21: E741 ambiguous variable name 'l'
support/scripts/check-dotconfig.py:20:38: E741 ambiguous variable name 'l'
support/scripts/size-stats:76:13: E741 ambiguous variable name 'l'
support/testing/tests/core/test_bad_arch.py:17:32: E741 ambiguous variable name 'l'
support/testing/tests/package/test_python_treq.py:10:30: E741 ambiguous variable name 'l'
support/testing/tests/toolchain/test_external.py:30:42: E741 ambiguous variable name 'l'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The dbus-next package uses the Python type annotation for dbus types. This is
not compatible with the python typing assumption that flake8 makes.
Exclude F821 from this line.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/1687009829
partially:
support/testing/tests/package/sample_python_dbus_next.py:17:36: F821 undefined name 's'
support/testing/tests/package/sample_python_dbus_next.py:17:48: F821 undefined name 's'
support/testing/tests/package/sample_python_dbus_next.py:17:56: F821 undefined name 's'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add knockd option to make libpcap and MMU optional and enable it by
default for backward compatibility
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues:
- CVE-2021-41089: Create parent directories inside a chroot during docker
cp to prevent a specially crafted container from changing permissions of
existing files in the host’s filesystem.
- CVE-2021-41091: Lock down file permissions to prevent unprivileged users
from discovering and executing programs in /var/lib/docker.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issue:
- CVE-2021-41092: Ensure default auth config has address field set, to
prevent credentials being sent to the default registry.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Drop backported patch for GCC 10 build problem, part of release
- Use upstream sha256 instead of locally computed
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
On Linux version >= 4.20 in order to have mali working we need to pass
drm_kms_helper.drm_leak_fbdev_smem=1 and at least
drm_kms_helper.drm_fbdev_overalloc=200 to have a double buffer fbdev.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changelog:
- 15346de client: Always close connection with request body in case of error
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changelog:
- 2537be0 cmake: add a possibility to set library version
- 4becbd6 ubusd: convert tx_queue to linked list
- c736e47 ubusd: add per-client tx queue limit
- a8cf678 ubusd: protect against too-short messages
- 4fc532c ubusd: fix tx_queue linked list usage
- b743a33 ubusd: log ACL init errors
- 2099bb3 libubus: use list_empty/list_first_entry in ubus_process_pending_msg
- ef03848 libubus: process pending messages in data handler if stack depth is 0
- a72457b libubus: increase stack depth for processing obj msgs
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There's a new feature to offload L2TP to the Linux kernel, which depends
on libmnl. A new menu option was introduced for that.
It's possible to link an internal version of libmnl
statically for smaller binary size on constraint targets, but this was
not added to the buildroot package for complexity reasons (both build
and licensing).
The COPYING file gained an additional paragraph for internal libmnl
which does not apply, because internal libmnl is not used in the
package.
Link: https://fastd.readthedocs.io/en/latest/releases/v22.html
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix CVE-2021-32765: Hiredis is a minimalistic C client library for the
Redis database. In affected versions Hiredis is vulnurable to integer
overflow if provided maliciously crafted or corrupted `RESP` `mult-bulk`
protocol data. When parsing `multi-bulk` (array-like) replies, hiredis
fails to check if `count * sizeof(redisReply*)` can be represented in
`SIZE_MAX`. If it can not, and the `calloc()` call doesn't itself make
this check, it would result in a short allocation and subsequent buffer
overflow.
https://github.com/redis/hiredis/blob/v1.0.2/CHANGELOG.md
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changelog (since 1.68):
- 1.69, 2021-03-30 Added link to Ada bindings by Tama McGlinn.
Fixed problem with undefined off_t on some compilers.
- 1.70, Patch to ensure compilation with gcc -std=c99, as reported by
John Blaiklock. Fix some inconsistencies in version numbers.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Provide convenience links for BCM43455/CYW43455 based RPi3A+, RPi3B+
and RPi4B WIFI firmware configuration files to avoid runtime firmware
loading warning in the kernel logs, e.g. (RPi3B+):
brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt failed with error -2
or (RP4B):
brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[me: slight rewording/rewrapping in commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add option for the debug set of start/fixup boot files.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Try to be less smart (focused on the one target/one use-case),
instead reduce the rpi-firmware package to a selectable list
of (verbatim) installed firmware files.
- change rpi-firmware config handling from rpi-variant/rpi-flavour
choices to bootcode.bin, pi-default/-extended/-cut-down and
pi4-/default/-extended/-cut-down selection
- add BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE option to select installable
config.txt file
- remove config.txt modify code/handling from raspberry post-image.sh
script
- add different customized config.txt files to the raspberry board
section
- change dtoverlay krnbt from 'dtoverlay=miniuart-bt,krnbt=on' to extra line
with explanation comment
- change raspberry defconfigs to select appropiate rpi-firmware
and config.txt files
- change genimage-raspberrypi4.cfg/genimage-raspberrypi4-64.cfg to
use start4.elf and fixup4.dat
- update board/raspberrypi/readme.txt (add optional files fixup4.dat,
start4.elf and zImage)
With this changes a better support for custom use-cases should
be possible, specially multi-target SD cards as suggested by
Stefan Agner ([1]).
[1] http://lists.busybox.net/pipermail/buildroot/2021-February/303318.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr: fix case of no config.txt provided]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since the ubi/ubifs test has been introduced, it's not possible to
boot the same ubi image twice [1]:
"TODO: if you boot Qemu twice on the same UBI image, it fails to
attach the image the second time, with "ubi0 error:
ubi_read_volume_table: the layout volume was not found"."
For some reason, the kernel corrupt the ubi image if the ubifs
rootfs is mounted with write access. Use a custom config file
to mount the rootfs readonly (vol_type=static). Doing so requires
to add the flash size (vol_size=64MiB).
At least it allows to boot several times the same ubi image.
[1] bf4a6490e4
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The current ubi/ubifs test (test_ubi.py) rely on a Qemu bug present in
2.8.0 that was fixed in Qemu 2.9.0 [1]. The ubi/ubifs settings is
updated to run with Qemu >= 2.9.0 using the new multiple chip handling.
If needed, the old behavior can be enabled using the pflash01 property
"old-multiple-chip-handling" [2].
The issue was not detected until now since we are sill using an old
qemu (2.8 from Debian stretch) for testing in gitlab (using the
Buildroot Docker image used by gitlab-ci.yml).
First the logical eraseblock size (LEB) must be updated to the value
0x3ff80 reported by the kernel when using qemu >= 2.9.0.
UBIFS (ubi0:0): Mounting in unauthenticated mode
UBIFS error (ubi0:0 pid 1): ubifs_read_superblock: LEB size mismatch: 524160 in superblock, 262016 real
UBIFS error (ubi0:0 pid 1): ubifs_read_superblock: bad superblock, error 1
But the system is still failing to boot:
UBIFS error (ubi0:0 pid 1): ubifs_scan: garbage
UBIFS error (ubi0:0 pid 1): ubifs_recover_master_node: failed to recover master node
ubifs is reading garbage since Qemu >= 2.9.0 report a sector
length per device divided by the number of devices (see commit [1]).
The kernel detect two flash devices (dmesg):
Concatenating MTD devices:
(0): "40000000.flash"
(1): "40000000.flash"
into device "40000000.flash"
Divide the physical eraseblock (PEB) size by two.
Tested with qemu 2.9.0, 5.1.0.
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/1543100932
[1] https://git.qemu.org/?p=qemu.git;a=commitdiff;h=feb0b1aa11f14ee71660aba46b46387d1f923c9e
[2] http://lists.busybox.net/pipermail/buildroot/2021-September/622069.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Adding the Image format on the Qemu command line avoid this warning:
"WARNING: Image format was not specified for 'output/TestUbi/images/rootfs.ubi' and probing guessed raw.
Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted.
Specify the 'raw' format explicitly to remove the restrictions."
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 71b8322712 updated the Dockerfile
to be used in CI tests. In order to actually use this new docker image,
update .gitlab-ci.yml to point to the docker image that was created with
the updated Dockerfile.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We are going to remove the gcc fork for csky since it doesn't build
with the latest compilers (gcc 8, 10, 11 tested) [1].
Removing theses defconfigs and the csky gcc fork has become unavoidable
since the Buildroot Docker image used by the gitlab CI will switch soon
to Debian bullseye soon [2].
The cksy gcc fork based on gcc 6 has not been updated since it has been
added to Buildroot [3]. Since then, csky has been added to binutils and
gcc but using the latest upstream version (binutils 2.37 and gcc 11) is
not yet possible due to build issue with glibc 2.34 [4].
Moreover, qemu_csky defconfigs was to be used with the csky qemu fork
(based on Qemu 3.x) added by commit [5] and removed by commit [6].
Since then it's not possible to do a runtime test with theses
defconfigs.
Theses defconfigs can be added back later if the csky toolchain support
is fixed and csky supported by upstream Qemu.
[1] http://lists.busybox.net/pipermail/buildroot/2021-August/621504.html
[2] 71b8322712
[3] 7873a5bd5e
[4] http://lists.busybox.net/pipermail/buildroot/2021-October/624596.html
[5] f816e5b276
[6] 58af9a70cc
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Guo Ren <ren_guo@c-sky.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Asked-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Buildroot CI has been failing due to 404 error on older U-Boot. Updating
the U-Boot version should fix it and it doesn't hurt to use the latest
U-Boot anyway.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure without C++ raised since bump to version
0.11.0 in commit c3a907a770:
../output-1/build/usbredir-0.11.0/meson.build:1:0: ERROR: Unknown compiler(s): [['/home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-g++']]
The following exception(s) were encountered:
Running "/home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-g++ --version" gave "[Errno 2] No such file or directory: '/home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-g++'"
Fixes:
- http://autobuild.buildroot.org/results/eca1d8a2b73a769354ab1d24c7996be30f152138
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes CVE-2021-37600 (although the CVE is disputed).
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr: add reference to the CVE]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
nftbles' --with-debug option enables both debugging symbols (with -g)
and debugging macros (with -DDEBUG).
The former are globally driven by the BR2_ENABLE_DEBUG and BR2_DEBUG_n
set of options, and enforced in our toolchain wrapper; the latter should
be driven by the BR2_ENABLE_RUNTIME_DEBUG, but nftables only uses it to
activate an assert-like macro in its json output generator, so we can
well live without that.
So we just unconditionally disable debug in nftables.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr: write a commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
CVE-2020-7747 applies to the Javascript lightning-server project, and
not to the GNU Lightning project:
https://nvd.nist.gov/vuln/detail/CVE-2020-7747
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
[yann.morin.1998@free.fr: reword commit log; add URL]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The hardware related pipelines are obviously not available on other
architectures.
As suggested by upstream [0], add a dependency on arm or aarch64 for
RaspberryPi pipeline, to avoid the following build failure with a
powerpc64 toolchain since commit c09f126f57 (package/libcamera: bump
to version e355ca0087cd93ef80f74c61018e9e9228a93313):
In file included from ../include/libcamera/base/log.h:10,
from ../src/ipa/raspberrypi/raspberrypi.cpp:18:
../src/ipa/raspberrypi/raspberrypi.cpp:64:53: in 'constexpr' expansion of 'std::chrono::operator/<long double, std::ratio<1>, double>(std::literals::chrono_literals::operator""s(1.0e+0l), 3.0e+1)'
/home/buildroot/autobuild/instance-2/output-1/host/opt/ext-toolchain/powerpc64-buildroot-linux-gnu/include/c++/9.3.0/chrono:502:32: error: '(1.0e+0l / 3.0e+1)' is not a constant expression
502 | return __cd(__cd(__d).count() / __s);
../src/ipa/raspberrypi/raspberrypi.cpp:73:56: in 'constexpr' expansion of 'std::chrono::operator/<long double, std::ratio<1>, double>(std::literals::chrono_literals::operator""s(1.0e+0l), 6.0e+1)'
/home/buildroot/autobuild/instance-2/output-1/host/opt/ext-toolchain/powerpc64-buildroot-linux-gnu/include/c++/9.3.0/chrono:502:32: error: '(1.0e+0l / 6.0e+1)' is not a constant expression
Fixes:
- http://autobuild.buildroot.org/results/49caebe7ef7e3d63de49e78d5d6839dd0aedf10c
Additionally, as Kieran puts it:
I'd go further and filter the IPU3 on only x86 for instance, and the
RKISP on (arm||aarch64).
So be it.
[0] https://lists.libcamera.org/pipermail/libcamera-devel/2021-October/025796.html:
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Suggested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: abide by Kieran's wish]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add an configuration to use personalized png image. If the configuration is
empty we keep the psplash default image.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[Arnout: use ifneq condition instead of $(if ...)]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This package provides a set of tools originally developed for the
OpenWrt project. They allow working with various firmware formats that
are required for flashing new images on embedded devices.
One of tools (mkhilinkfw) depends on OpenSSL and doesn't support any
other SSL library (like wolfSSL) directly. It can be used with wolfSSL
using its compatibility layer though.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
[Arnout: add comment about missing license files]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
There are currently three issues with the installation step:
1. it does not ensure the parent destination directory exists before
copying into it, so if /usr/share has not been created in the
dependency chain of edk2-platforms, the installation fails, which
may very well happen easily as edk2-plaforms has nothing in its
dependency chain (except the toolchain et al.);
2. all our dot-stampfiles and .files-list are also copied, as well as
the Readme, license files, and maintainers file. All of those are
useless on the target (and the .files-list introduce
non-reproduciiblity);
3. of a lesser importance, the construct to install, and specifically
to reinstall, does not match what we usually do in Buildroot
(removal of the directory to copy).
We fix all three in one fell swoop:
1. create the destination directory if needed;
2. copy just the directories with the actual platform descriptions
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Dick Olsson <hi@senzilla.io>
Cc: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add BR2_TARGET_EDK2_PLATFORM_OVMF_I386 for x86_64 architecture.
Update the management of EDK2_ARCH to follow the edk2 platform type in
place of BR2 architecture.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
wpewebkit builds without issue using host-python3.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Acked-By: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This release fixes two more bug introduced in release 3.10.0: the extended diagnostics triggered
assertions when used with update() or when inserting elements into arrays. All changes are
backward-compatible.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reworked existing patch to make it apply to this version
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Adding myself as co-maintainer of libuev alongside Peter Seiderer, his
initiative, and I am the upstream so seems logical.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Also change -Dpycairo=false to -Dpycairo=disabled as the option type has
changed to a feature.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The bzip2 module is needed to build the host variant of NodeJS 14.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* The package doesn't support python2 anymore.
* Indent with two spaces in the hash file.
* License file was updated to fully fit the Apache license format
(see: https://github.com/arrow-py/arrow/pull/679)
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Remove six dependency which is no longer required.
Add new bidict dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop python2 support and propagate reverse dependency.
Remove six dependency as it is no longer required.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Also bump linux headers version to 5.10.
Based on NXP 5.10.35-2.0.0 release.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
i.MX VC8000E Encoder library. Intended for the i.MX 8M Plus processor.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
To match NXP 5.10.35-2.0.0 release.
Various updates to the license files, but still NXP license.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
To match NXP 5.10.35-2.0.0 release.
Various updates to the license files, but still NXP license.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
To match NXP 5.10.35-2.0.0 release.
Refresh patch 0001.
Various updates to the license files, but still NXP license.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
To match NXP 5.10.35-2.0.0 release.
Various updates to the license files, but still NXP license.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Although the package claims to support both python2 and python3,
there are some places which contain python3-only code (mainly
asyncio-related).
We can try to tweak some of the files in order to make it work with
python2, but it doesn't worth the effort since python2 isn't maintained
for a long time.
Update the reverse recursive dependencies accordingly.
Fixes:
- http://autobuild.buildroot.net/results/356c6b09566c6020dc320eb89da791581571cb7f/
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
From the ChangeLog (see git history for full details):
- Fix suffix check regression on Windows with Large File Support
- Skip setting alternate interface when not needed
- Only clamp transfer size on Linux
- Quirk for GD32 leave request
- Improve status and error messages and exit codes
- dfuse: Process all alternate interfaces in a DfuSe file
- dfuse-pack.py: Fix alternate settings if first is 0
Link: https://lists.osmocom.org/pipermail/dfu-util/2021-September/000014.html
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since v0.8 a script 'dfuse-pack.py' is part of the package, which has a
different license.
Fixes: c212a90b61 ("package/dfu-util: bump version to 0.8, add hash, fix SITE url")
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
DFU 1.1 specification is also supported.
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Commit e6ee07f41a (package/python-flask-expects-json: new package)
added a non-functional test case that, as noticed by Edgar, fails with:
AssertionError: '%{http_code}' != '200'
That's because the % sign is self-escaped, à-la C, in the first part
of the command, probably to avoid its being %-formatted. But only the
second part of the command is %-formatted, so we do not need to
self-escape % in the first part.
Additionally, since eb3ee3078a (support/testing/infra/emulator.py:
prevent the commands from wrapping), we no longer need to play tricks
with commands that are too long to fit on the first line of the shell
prompt.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Edgar Bonet <bonet@grenoble.cnrs.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* The package doesn't support python2 anymore.
* Take also sha256 from pypi.
* License was updated with a year bump.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* The package doesn't support python2 anymore (so the POST_INSTALL
hook is not needed now).
* Indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Testing buildroot 2021.05 I observed that after first
boot I was having the following folders:
/context:
/system_u:object_r:auditd_log_t
The root of this problem turned to be a difference in the
output of $(selabel_lookup -b file -k /var/log/audit) called
by S02auditd that from this version on looks like:
$ selabel_lookup -b file -k /var/log/audit
Default context: system_u:object_r:auditd_log_t
This patch will cut it to retrieve the type piece only. Unfortunately,
audit has no options to create machine-readable output that is
guaranteed not to change, so that's the best we can do.
Signed-off-by: José Pekkarinen <jose.pekkarinen@unikie.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
dtbocfg, which stands for Device Tree Blob Overlay Configuration
File System, was developed to serve as a userspace API of Device
Tree Overlay.
https://github.com/ikwzm/dtbocfg
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The list of tests is as follows:
TestGdbHostOnlyDefault: build just minimal host-gdb, default version
TestGdbHostOnlyAllFeatures: build host-gdb, default version, with all
features enabled (TUI, Python, simulator)
TestGdbserverOnly: build just target gdbserver, default version
TestGdbFullTarget: build just target gdb, default version
TestGdbHostOnly9x: build minimal host-gdb, 9.x version
TestGdbHostGdbserver9x: build minimal host-gdb 9.x + gdbserver
TestGdbHostGdbTarget9x: build minimal host-gdb 9.x + full gdb
TestGdbHostOnly11x: build minimal host-gdb, 11.x version
TestGdbHostGdbserver11x: build minimal host-gdb 11.x + gdbserver
TestGdbHostGdbTarget11x: build minimal host-gdb 11.x + gdb
TestGdbArc: build minimal host-gdb + gdb + gdbserver, for the special
ARC architecture version
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now that gdb 11.x has been added, that 10.x is the default, we can
drop version 8.3.x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When doing this, we can simplify the RISC-V related logic. Indeed, as
there was no support for RISC-V in gdb 9.x, which was the current
default, we had some trickery in the Config.in file to ensure gdb 10.x
was used by default on RISC-V. However now that 10.x is the default
for everybody, this trickery is no longer needed.
Also, we now needs to enable BR2_PACKAGE_GDB_TOPLEVEL when host-gdb is
not built, as the default target gdb version is 10.x, and threfore
requires BR2_PACKAGE_GDB_TOPLEVEL=y.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
All patch from gdb 10.2 are kept.
Starting from version 11.x, gdb needs the gmp library. The target
variant needs a bit of care: if BR2_GDB_VERSION_11 is not set, either
the host gdb is not enabled, in which case the default for the target
gdb is 9.x, or the host gdb is enabled, and another version is selected.
Signed-off-by: Michael Fischer <mf@go-sys.de>
[Thomas:
- fix how the gmp dependency is handled
- set BR2_PACKAGE_GDB_TOPLEVEL to y for gdb 11.x
- fix how BR2_GDB_VERSION is set for gdb 11.x]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- only select target gmp if using gdb 11
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Repeat after me: "Forcing the value of <pkg>_DEPENDENCIES inside a
conditional is the root of all evil."
Repeat after me: "Forcing the value of <pkg>_DEPENDENCIES inside a
conditional is the root of all evil."
Repeat after me: "Forcing the value of <pkg>_DEPENDENCIES inside a
conditional is the root of all evil."
Repeat after me: "Forcing the value of <pkg>_DEPENDENCIES inside a
conditional is the root of all evil."
Enough? :-)
Due to this mistake, any other GDB_DEPENDENCIES defined before this
assignment were lost. For example, the host-flex host-bison added
inside the GDB_FROM_GIT==y condition were ignored if
BR2_PACKAGE_GDB_DEBUGGER.
Fixes the build of all ARC configurations that have
BR2_PACKAGE_GDB_DEBUGGER enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Changelog:
- Update CYW43455 bluetooth firmware,
Second Spectra fix for CYW43455 (CVE-2020-10370)
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changelog:
- Update CYW43455 bluetooth firmware,
Second Spectra fix for CYW43455 (CVE-2020-10370)
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Upstream now supplies sha256 hashes, so drop upstream md5 and locally
computed sha256 in favor of that.
The hash for LICENSE has changed due to the copyright years and author
last name being updated.
The hash for chomp.c and pidfile.c has been changed due to copyright
years and author last name being updated, as well as doxygen comments
being added to the files.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issue:
- SQUID-2020:12 Out-Of-Bounds memory access in WCCPv2
(CVE-2021-28116 aka ZDI-CAN-11610)
Due to an out of bounds memory access Squid is vulnerable to an
information leak vulnerability when processing WCCPv2 messages.
This problem allows a WCCPv2 sender to corrupt Squids list of
known WCCP routers and divert client traffic to attacker
controlled routers.
This attack is limited to Squid proxy with WCCPv2 enabled and
IP spoofing of a router IP address configured as trusted in
squid.conf.
For more details, see the advisory:
http://lists.squid-cache.org/pipermail/squid-announce/2021-October/000136.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go1.17.2 (released 2021-10-07) includes a security fix to the linker and
misc/wasm directory, as well as bug fixes to the compiler, the runtime, the go
command, and to the time and text/template packages.
https://golang.org/doc/devel/release#go1.17.minor
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changelog (since 2021.04.21):
47007d0 wireless-regdb: update regulatory database based on preceding changes
e983a25 Update regulatory rules for Ecuador (EC)
a0bcb88 wireless-regdb: Update regulatory rules for Norway (NO) on 6 and 60 GHz
cdf854d wireless-regdb: Update regulatory rules for Germany (DE) on 6GHz
a4468e8 wireless-regdb: update regulatory database based on preceding changes
86cba52 wireless-regdb: reduce bandwidth for 5730-5850 and 5850-5895 MHz in US
6fa2384 wireless-regdb: remove PTMP-ONLY from 5850-5895 MHz for US
9839e1e wireless-regdb: recent FCC report and order allows 5850-5895 immediately
42dfaf4 wireless-regdb: update 5725-5850 MHz rule for GB
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2021-41617: sshd in OpenSSH 6.2 through 8.x before 8.8, when
certain non-default configurations are used, allows privilege escalation
because supplemental groups are not initialized as expected. Helper
programs for AuthorizedKeysCommand and AuthorizedPrincipalsCommand may
run with privileges associated with group memberships of the sshd
process, if the configuration specifies running the command as a
different user.
https://www.openssh.com/txt/release-8.8https://www.openssh.com/txt/release-8.7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch removes unneeded redirections when
calling iptables-restore and iptables-save, and
it adds the save operation to the usage help.
Signed-off-by: José Pekkarinen <jose.pekkarinen@unikie.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package uses meson-package infrastracture, so we don't need to
explicitly pass its additional CFLAGS to some variable. The only thing we
need to pass them is to use MESA3D_CFLAGS, because in package/pkg-meson.mk
we have:
$(2)_CFLAGS ?= $$(TARGET_CFLAGS)
that makes the work automatically, where $(2) is exactly the package name,
though $(2)_CFLAGS expands to MESA3D_CFLAGS.
So let's remove the MESA3D_CONF_OPTS += -DCMAKE_C_FLAGS="$(MESA3D_CFLAGS)"
line that has been added by mistake.
Note: this doesn't fix any bug, but remove an unnecessary and ambiguos line
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Traditional VT-10x terminals (and their emulators) [0] have a "magic
margins" feature that enables the last character position to be updated
without scrolling the screen: whenever a character is printed on the
last column, the cursor stays over the character, instead of moving to
the next line.
The Busybox shell, ash, attempts to defeat this feature by printing
CR,LF right after echoing a character to the last column.[1] This
doesn't play well with emulator.py. The run() method of the Emulator
class captures the output of the emulated system and assumes the first
line it reads is the echo of the command, and all subsequent lines are
the command's output. If the line made by the command + shell prompt is
longer than 80 characters, then it is echoed as two or more lines, and
all but the first one are mistaken for the command's output.
We fix this by telling the emulated system that we are using an
ultra-wide terminal with 29999 columns. Larger values would be ignored
and replaced by the default, namely 80 columns.[2]
[0] https://vt100.net/docs/vt100-ug/chapter3.html - DECAWM
[1] https://git.busybox.net/busybox/tree/libbb/lineedit.c?h=1_34_0#n412
[2] https://git.busybox.net/busybox/tree/libbb/xfuncs.c?h=1_34_0#n258
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Co-authored-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Upstream has .sha256 checksum files, drop redundant .md5 checksum
- Backport upstream patch to silence bogus error message for loopback
- SMCRoute is useless w/o kernel support, use same fixups as mrouted
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure without wchar raised since bump to
version 0.12.0 in commit 83a0e8dea2:
/home/buildroot/autobuild/instance-0/output-1/build/log4cxx-0.12.0/src/main/include/log4cxx/helpers/transcoder.h:113:33: error: 'wstring' in namespace 'std' does not name a type
113 | static void decode(const std::wstring& src, LogString& dst);
| ^~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/7d0297b071df06bc312b9927396021aa6fe401f4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure without stack-protector raised since
bump to version 0.11.0 in commit
c3a907a770:
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/9.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: usbredirparser/libusbredirparser.so.1.1.0.p/usbredirparser.c.o: in function `va_log':
usbredirparser.c:(.text+0x1c4): undefined reference to `__stack_chk_guard'
Fixes:
- http://autobuild.buildroot.org/results/40de5443e98157ad50c6841ea70a835cd5ad4fe9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This has a compile time dependency on gst1-plugins-bad due to
the codecparsers dependency.
We need to prevent the wpe plugin from being selected when wpewebkit
media-stream support is enabled as the wpe plugin requires wpewebkit
which would create a circular dependency with gst1-plugins-bad.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Sadly the most recent version of Microchip's SAM-BA programming tool is no longer hosted
on GitHub. Therefore the package is downloaded from Microchip directly.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
mips_32 is not supported by ffmpeg and it tries to build with loongson3
SIMD support that leads to build failure due to:
/tmp/ccFO2LRa.s: Assembler messages:
/tmp/ccFO2LRa.s:15314: Error: opcode not supported on this processor: mips32 (mips32) `dmult $2,$6'
/tmp/ccFO2LRa.s:15316: Error: opcode not supported on this processor: mips32 (mips32) `dsrl $2,$2,32'
So let's --disable-asm to prevent using those unsupported opcodes for every
mips architecture according to Arnout.
Fixes:
http://autobuild.buildroot.net/results/f01/f01d9cedec8e1b371308d0f7af561a75883fa27c/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Compiling on Ubuntu 20.04 generates this:
./util.c: In function ‘file_write_dep’
./util.c:54:18: warning: ‘..config.tmp’ directive writing 12 bytes into a region of size between 1 and 4097 [-Wformat-overflow=]
54 | sprintf(buf, "%s..config.tmp", dir);
| ^~~~~~~~~~~~
./util.c:54:2: note: ‘sprintf’ output between 13 and 4109 bytes into a destination of size 4097
54 | sprintf(buf, "%s..config.tmp", dir);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
and similar warnings on confdata.c, lines 778, 989, 995, 1000, 1007,
1040, 1046 and 1054. Avoid the warnings by enlarging the destination
buffer of fprintf().
Normally, we want changes to kconfig to be reflected by patches in
support/kconfig/patches. This makes it easier to resync with upstream
kconfig. However, in this case, everything that is changed here is
already changed completely (and differently) upstream, so there is no
added value in keeping the patch.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update to syslog-ng-3.34.1. Drop patch that has been applied upstream.
Update version in config file.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
With some toolchains (e.g. mips64el), partial linking fails in the
following way:
/tmp/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/mips64el-buildroot-linux-uclibc/8.4.0/../../../../mips64el-buildroot-linux-uclibc/bin/ld: build/release/libmupdf.a(Dingbats.cff.o): ABI is incompatible with that of the selected emulation
/tmp/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/mips64el-buildroot-linux-uclibc/8.4.0/../../../../mips64el-buildroot-linux-uclibc/bin/ld: failed to merge target specific data of file build/release/libmupdf.a(Dingbats.cff.o)
Taking inspiration from commit
9eca4b9f84, fix it by using GCC instead
of LD for partial linking.
Note that on mips the build will now produce warnings similar to this
one:
buildroot/output/host/lib/gcc/mips64el-buildroot-linux-gnu/10.3.0/../../../../mips64el-buildroot-linux-gnu/bin/ld: build/release/libmupdf.a(NotoSansTaiTham-Regular.ttf.o): warning: linking abicalls files with non-abicalls files
During a runtime test on mips64el under qemu, mupdf-x11 was
nonetheless able to display a sample PDF file correctly.
Fixes:
- http://autobuild.buildroot.net/results/156fe9ee5f6dccdc98990f6c5de5562383bc2b74/
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Plus, indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Plus, indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The pacakge doesn't support python2 anymore. Therefore, we can remove
host-python3-decorator and add a host variant for python-decorator.
As a consequence of that, the python-networkx dependency was renamed from
host-python3-decorator to host-python-decorator.
In addition, indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* The package doesn't support python2 anymore.
* Hence, python-simplelogging now depends on python3.
* License was updated with a year bump.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Plus, indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* License was updated with a year bump.
* Indent with two spaces on the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Plus, indent with two spaces on the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure with musl raised since bump to version
1.18 in commit 1a7be12e1e:
src/netconfig.c: In function 'netconfig_ipv6_to_string':
src/netconfig.c:188:18: error: 'struct in6_addr' has no member named '__in6_u'; did you mean '__in6_union'?
188 | memcpy(in6_addr.__in6_u.__u6_addr8, addr, 16);
| ^~~~~~~
| __in6_union
Fixes:
- http://autobuild.buildroot.org/results/2c4e6cf22e6fb5582470930241904878070f1144
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Release Notes:
```
This release was focused on stability and hardening, notably fixing some
long-standing race conditions and memory leaks. Default mount options got
tweaked towards data safety.
All users are strongly advised to upgrade.
```
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* Update unsupported testcases for musl (process.c has been removed in
this release)
* refresh 0001-lapi-Add-sysinfo.h-to-fix-build-with-MUSL-libc.patch
(unfortunately still needed, it'd be great to update all toolchains)
* Backport fix after this release:
- 3 patches for build fix on sourcery-arm
- functional fix from e42149e28 ("lib: fix MemAvailable parsing")
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Updated COPYING file to remove the PLPA exemption (appendix 2)
With this change the license is now GPLv2 without any additional wording.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is only a runtime dependency, not a build dependency.
Based on a similar patch by James Hilliard for the wpewebkit
package.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* The package doesn't support python2 anymore.
* Update comment of reverse dependency
* Indent with two spaces in the hash file.
* License was changed with a year bump.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
[yann.morin.1998@free.fr: update comment of reverse dependency]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* Update dependency list (added python-jedi).
* The package is python3-only, and not because of pygments, so
the comment after the "depends on" can be removed.
* Indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* The package doesn't support python2 anymore.
* The only reverse dependency, ipython, already depends on python3
* Update URL in Config.in.
* Indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
[yann.morin.1998@free.fr:
- actually add dependency on python3
- add note about ipython
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* The package doesn't support python2 anymore.
* The two reverse dependencies, crossbar and twisted, already depend on
python3
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
[yann.morin.1998@free.fr: add note about crossbar and twisted]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* The package doesn't support python2 anymore.
* Update comment of reverse dependencies
* Indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
[yann.morin.1998@free.fr: update comment of reverse dependencies]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* License was updated with a year bump.
* Added md5 from pypi and reformat indentation with two spaces.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* The package doesn't support python2 anymore.
* SETUP_TYPE was changed to setuptools.
* Indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* Update URL on Config.in
* Indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
During the review of the lua-augeas package, it was pointed out that a
"select BR2_PACKAGE_AUGEAS" should be used instead of a "depends on
BR2_PACKAGE_AUGEAS". But, the same review pointed that python-augeas
used a "depends on BR2_PACKAGE_AUGEAS".
In order to make things consistent, let's switch to "select
BR2_PACKAGE_AUGEAS" as well for python-augeas.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We need to backport an ARM compilation build fix.
The optional pw-cli tool now depends on readline, so depend on it when
available.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The ISO9660 tests are only testing BIOS Legacy.
Add support to test an ISO9660 image based on EFI BIOS.
Add support to test an ISO9660 hybrid image based on Legacy and EFI BIOS.
Add dedicated Grub2 builtin config for the EFI compatible cases.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add support the build the firmware for QEMU i386 pc machine
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[yann.morin.1998@free.fr:
- do not make it available for BR2_x86_64
- introduce BR2_TARGET_EDK2_ARCH_SUPPORTS
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When booting under EFI, grub2 will output a nice and shiny boot menu,
using extended ASCII characters (in the [0x80..0xFF] range), namely
CP437 [0], on the assumption that the VGA BIOS is a real one and has the
corresponding (and only!) font, as is the case on real hardware.
However, when run in our runtime test infrastructure, this triggers the
infamous python UnicodeDecodeError exception:
Traceback (most recent call last):
[...]
emulator.login()
File "[...]/buildroot/support/testing/infra/emulator.py", line 89, in login
index = self.qemu.expect(["buildroot login:", pexpect.TIMEOUT],
File "/usr/lib/python3/dist-packages/pexpect/spawnbase.py", line 340, in expect
return self.expect_list(compiled_pattern_list,
File "/usr/lib/python3/dist-packages/pexpect/spawnbase.py", line 369, in expect_list
return exp.expect_loop(timeout)
File "/usr/lib/python3/dist-packages/pexpect/expect.py", line 111, in expect_loop
incoming = spawn.read_nonblocking(spawn.maxread, timeout)
File "/usr/lib/python3/dist-packages/pexpect/pty_spawn.py", line 485, in read_nonblocking
return super(spawn, self).read_nonblocking(size)
File "/usr/lib/python3/dist-packages/pexpect/spawnbase.py", line 178, in read_nonblocking
s = self._decoder.decode(s, final=False)
File "/usr/lib/python3.8/codecs.py", line 322, in decode
(result, consumed) = self._buffer_decode(data, self.errors, final)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xda in position 0: invalid continuation byte
Grub2 is not wrong in emitting those chars, and basically we should not
expect the packages we test to always emit correct UTF-8 sequences; at
the very least, this should not cause the test infra to fail.
We fix that by telling pexpect.spawn to "fix" such invalid sequences by
replacing them with the suitable Unicode character, U+FFFD REPLACEMENT
CHARACTER.
[0] https://en.wikipedia.org/wiki/Code_page_437
[1] https://docs.python.org/3/library/codecs.html#error-handlers
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[yann.morin.1998@free.fr:
- don't change encoding, use codec_errors
- rewrite commit log accordingly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* The package doesn't python2 anymore.
* Indent with two spaces in the hash file.
* License changes was a year bump.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* Indent with two spaces in the hash file.
* License change was a year bump.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* The package doesn't support python2 anymore.
* License was updated with a year bump.
* Indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* The package doesn't support python2 anymore.
* hash file: indent with two spaces and bring also sha256 from pypi.
* License was updated with a year bump.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* The package doesn't support python2 anymore.
* Indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* The package doesn't support python2 anymore.
* Indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure with python raised since its activation
by commit cfc80eeeb4:
In file included from /home/giuliobenetti/autobuild/run/instance-2/output-1/host/include/python3.9/Python.h:63,
from python/zbarmodule.h:24,
from python/zbarmodule.c:24:
/home/giuliobenetti/autobuild/run/instance-2/output-1/host/include/python3.9/pyport.h:741:2: error: #error "LONG_BIT definition appears wrong for platform (bad gcc/glibc config?)."
741 | #error "LONG_BIT definition appears wrong for platform (bad gcc/glibc config?)."
| ^~~~~
Fixes:
- http://autobuild.buildroot.org/results/43a8c8d5403c329f2d754ed09807a53772174397
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add support for building an hybrid ISO9660 image compatible with legacy
and UEFI BIOS. Note that this is not about an (iso)hybrid image, which
can boot from both a CDROM or a USB stick, but really about an image
being bootable from the legay BIOS or EFI; the two are orthognal.
The option -eltorito-alt-boot need to be used in the xorriso command
to generate the hybrid image. That option is a separator, meaning the
previous boot entry is done, and the following boot options define a new
boot entry.
The -no-emul-boot defines the type of the current boot image; that's why
it has to now be repeated in each of the BIOS and EFI options.
Finally, for symetry and consistency between the BIOS and EFI options,
we move the BIOS image option first.
Note: the BIOS boot image options have to be provided before the EFI
ones, or the system won't boot; the underlying reason is not known...
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[yann.morin.1998@free.fr:
- note about hybrid vs. (iso)hybrid
- explain -eltorito-alt-boot
- explain duplication of -no-emul-boot
- rename the variables
- note about the BIOS-EFI ordering
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add options to chose individual EAP plugins.
All the new plugins are enabled by default if the old single option was
enabled, for a seamless update from an older Buildroot config, but for
new configurations, they are not enabled by default.
BR2_PACKAGE_STRONGSWAN_EAP_AKA_3GPP2 is the only plugin requiring
libgmp; the selection of BR2_PACKAGE_GMP is moved down accordingly.
Signed-off-by: Martin Elshuber <martin.elshuber@theobroma-systems.com>
[yann.morin.1998@free.fr:
- move BR2_PACKAGE_STRONGSWAN_EAP to legacy
- extend commit log accordingly
- fix check-package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In commit 179ae068eb (fs/iso9660: add support to Grub EFI bootloader
in the image), we did a last-minute change when applying the patch, on
the flawed assumption that the commands were run in a standard Makefile
rule.
However, for filesystems, most commands are run in a script (so they run
under fakeroot). As such, we can't silence the commands with the usual
Makefile '@' construct.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add support to boot the Grub bootloader from an EFI BIOS in the ISO9660
image.
For that we need to create EFI System Partition (ESP). The ESP is a vfat
partition which contain the Grub2 binary at the /EFI/BOOT/ location.
xorriso command will generate the iso image including the ESP.
We notice Grub can not read and mount the ESP, therefore we place the Grub
configuration file in the ISO9660 partition. A Grub2 builtin configuration
need to be used to tell Grub2 to search automatically its configuration
file in the ISO9660 partition. Use 'set root=(cd0)' in the configuration
file passed to BR2_TARGET_GRUB2_BUILTIN_CONFIG_EFI.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[yann.morin.1998@free.fr: fix timestamp fixup hook]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When Grub2 is build it is configured only for one boot set-up, BIOS Legacy,
EFI 32 bit or EFI 64 bit. It can not deal with several boot set-up on the
same image.
This patch allows to build Grub2 for different configurations simultaneously.
To cover Grub2 configuration of legacy BIOS platforms (32-bit), 32-bit EFI
BIOS and 64-bit EFI BIOS in the same build, multi-build system felt much more
reasonable to just extend the grub2 package into 3 packages.
We can no longer use autotools-package as a consequence of this multi-build, and
we have to resort to generic-package and a partial duplication of
the autotools-infra. Grub2 was already using custom option like --prefix or
--exec-prefix so this won't add much more weirdness.
We use a GRUB2_TUPLES list to describe all the configurations selected.
For each boot case described in the GRUB2_TUPLES list, it configures and
builds Grub2 in a separate folder named build-$(tuple).
We use a foreach loop to make actions on each tuple selected.
We have to separate the BR2_TARGET_GRUB2_BUILTIN_MODULES and the
BR2_TARGET_GRUB2_BUILTIN_CONFIG for each BIOS or EFI boot cases.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[yann.morin.1998@free.fr:
- keep sub-options properly indented
- fix check-package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The startup.nsh file is useless to boot EFI payloads. We just need to
follow the naming detection specified in the UEFI spec.
The EFI payload need to be placed in the boot/efi folder in the EFI partition
and follow the architecture naming as described below:
32bit : bootia32.efi
x64 : bootx64.efi
aarch32 : bootarm.efi
aarch64 : bootaa64.efi
This naming is already right in the packages involved (systemd, grub2,
gummiboot), therefore we just need to drop the generation of the
startup.nsh file.
The usage of the startup.nsh in genimage is also dropped to avoid errors in
the image generation.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Tested-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When parsing and adding modules the refpolicy build system checks their
validity using xmllint. By default the host system version is used and
if not found an error is displayed but the build is not stopped. This
leads to interesting issues where modules are not added correctly to
modules.conf[1] (other possible issues are likely).
Fix this by adding a dependency on host-libxml2 and explicitly use the
xmllint binary built by Buildroot.
[1] https://lore.kernel.org/buildroot/20210830114531.2285178-1-jose.pekkarinen@unikie.com/
Tested-by: José Pekkarinen <jose.pekkarinen@unikie.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When building embedded systems, which buildroot targets, the system
often does not know the current time. However, when verifying X509
certificates this is often required.
The system-fix plugin is a handy tool to configure the behavior when
the current time is unknown.
Signed-off-by: Martin Elshuber <martin.elshuber@theobroma-systems.com>
The package is now standalone (no dependencies) and supports
only python3.
Plus, indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
python2 support has been removed since version 4.9.3 resulting in the
following build failure since bump to version 4.10.0 in commit
109ea1a4a2:
File "/tmp/instance-1/output-1/build/python-beautifulsoup4-4.10.0/bs4/__init__.py", line 36, in <module>
raise ImportError('You are trying to use a Python 3-specific version of Beautiful Soup under Python 2. This will not work. The final version of Beautiful Soup to support Python 2 was 4.9.3.')
Fixes:
- http://autobuild.buildroot.org/results/57e6677932f587c279cc0ed671895740d0cf2304
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Use the standard install for the host, so e.g. pvcreate is installed as
well. pvcreate is needed for libvirt.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
It's requirement has been removed in previous commit.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bugfix release, fixing a number of regressions:
- Fixed a regression in Django 3.2 that caused a crash validating "NaN"
input with a forms.DecimalField when additional constraints, e.g.
max_value, were specified (#32949).
- Fixed a bug in Django 3.2 where a system check would crash on a model with
a reverse many-to-many relation inherited from a parent class (#32947).
- Fixed a regression in Django 3.2 that caused the incorrect offset
extraction from fixed offset timezones (#32992).
https://docs.djangoproject.com/en/3.2/releases/3.2.6/https://docs.djangoproject.com/en/3.2/releases/3.2.7/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Changelog (since 1.17, from [1]):
ver 1.18:
Add support for Access Point FILS IP Address Assignment IE.
Add support for P2P GO-side 4-way handshake IP allocation.
Add support for forcing SAE group 19 if BSS requires it.
Fix issue with handling faulty SAE duplicate commits.
[1] https://git.kernel.org/pub/scm/network/wireless/iwd.git/tree/ChangeLog
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Changelog (since 0.43, from [1]):
ver 0.44:
Fix issue with allowing zero byte input for AEAD cipher.
Fix issue with filling in DNS info in DHCP lease objects.
Add support neighbor discovery utility helpers.
[1] https://git.kernel.org/pub/scm/libs/ell/ell.git/tree/ChangeLog
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop patches that are now upstream.
Enable python module when available as it should now work with
python3.9 as of this release.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update to micropython-1.17. The LICENSE text has been updated to reflect
the licenses used for various libraries and ports, update the hash
accordingly.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The various micropython ports may include code licensed under different
licenses compared to the core micropython. List these in MICROPYTHON_LICENSE.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Plus, indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since bump of protobuf to version
3.18.0 in commit c28924920d:
/home/giuliobenetti/autobuild/run/instance-0/output-1/build/opencv3-3.4.15/modules/dnn/src/caffe/caffe_io.cpp: In function 'bool cv::dnn::ReadProtoFromBinary(google::protobuf::io::ZeroCopyInputStream*, google::protobuf::Message*)':
/home/giuliobenetti/autobuild/run/instance-0/output-1/build/opencv3-3.4.15/modules/dnn/src/caffe/caffe_io.cpp:1114:67: error: no matching function for call to 'google::protobuf::io::CodedInputStream::SetTotalBytesLimit(const int&, int)'
1114 | coded_input.SetTotalBytesLimit(kProtoReadBytesLimit, 536870912);
| ^
In file included from /home/giuliobenetti/autobuild/run/instance-0/output-1/build/opencv3-3.4.15/modules/dnn/src/caffe/caffe_io.cpp:93:
/home/giuliobenetti/autobuild/run/instance-0/output-1/host/mipsel-buildroot-linux-gnu/sysroot/usr/include/google/protobuf/io/coded_stream.h:401:8: note: candidate: 'void google::protobuf::io::CodedInputStream::SetTotalBytesLimit(int)'
401 | void SetTotalBytesLimit(int total_bytes_limit);
| ^~~~~~~~~~~~~~~~~~
/home/giuliobenetti/autobuild/run/instance-0/output-1/host/mipsel-buildroot-linux-gnu/sysroot/usr/include/google/protobuf/io/coded_stream.h:401:8: note: candidate expects 1 argument, 2 provided
Fixes:
- http://autobuild.buildroot.org/results/2856060cb59250f4ef7ab75a848a3dc0be9b821b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Fix the following build failure raised since bump of protobuf to version
3.18.0 in commit c28924920d:
/home/giuliobenetti/autobuild/run/instance-0/output-1/build/opencv3-3.4.15/modules/dnn/src/caffe/caffe_io.cpp: In function 'bool cv::dnn::ReadProtoFromBinary(google::protobuf::io::ZeroCopyInputStream*, google::protobuf::Message*)':
/home/giuliobenetti/autobuild/run/instance-0/output-1/build/opencv3-3.4.15/modules/dnn/src/caffe/caffe_io.cpp:1114:67: error: no matching function for call to 'google::protobuf::io::CodedInputStream::SetTotalBytesLimit(const int&, int)'
1114 | coded_input.SetTotalBytesLimit(kProtoReadBytesLimit, 536870912);
| ^
In file included from /home/giuliobenetti/autobuild/run/instance-0/output-1/build/opencv3-3.4.15/modules/dnn/src/caffe/caffe_io.cpp:93:
/home/giuliobenetti/autobuild/run/instance-0/output-1/host/mipsel-buildroot-linux-gnu/sysroot/usr/include/google/protobuf/io/coded_stream.h:401:8: note: candidate: 'void google::protobuf::io::CodedInputStream::SetTotalBytesLimit(int)'
401 | void SetTotalBytesLimit(int total_bytes_limit);
| ^~~~~~~~~~~~~~~~~~
/home/giuliobenetti/autobuild/run/instance-0/output-1/host/mipsel-buildroot-linux-gnu/sysroot/usr/include/google/protobuf/io/coded_stream.h:401:8: note: candidate expects 1 argument, 2 provided
Fixes:
- http://autobuild.buildroot.org/results/4f2a4e769c826d44fdec61b049d3d30a7e39a4d2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
- Drop patch (already in version) and so autoreconf
- Update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Fix the following build failure with glibc >= 2.33:
src/client/linux/handler/exception_handler.cc: In function 'void google_breakpad::{anonymous}::InstallAlternateStackLocked()':
src/client/linux/handler/exception_handler.cc:147:49: error: no matching function for call to 'max(int, long int)'
147 | static const unsigned kSigStackSize = std::max(16384, SIGSTKSZ);
| ~~~~~~~~^~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/61a89fa954db16a7b5b9fcee55c545e489f8d489
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
python-attrs contains a file with API for python 3.6+.
Although we can make a "tweak" and remove this specific file
for python2, we prefer to make this package available only for
python3, because the day this package (and many others) will drop
support for python2 is probably very close.
In addition, update python-attrs recursive dependencies to
depend on python3 too (python-automat is the only one left).
Fixes:
- http://autobuild.buildroot.net/results/aa6/aa6889bc254eaa93adb4fc1a71bcee9f2f23cb33/
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
[yann.morin.1998@free.fr: fix check-package]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This release clears CVE-2021-40530 and fixes a problem with ChaCha20
AVX2 implementation. The CVE was due to ElGamal encryption using a work
estimate to size encryption exponents instead subgroup order. The
ChaCha20 issue was due to mishandling a carry in the AVX2 code path. The
ChaCha20 issue was difficult to duplicate, so most users should not
experience it.
https://github.com/weidai11/cryptopp/releases/tag/CRYPTOPP_8_6_0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Syslinux use some python scripts during the build and they
are using python interpreter by default. It fail to build
when there is no python interpreter on the host.
[...]/syslinux-6.03/com32/cmenu/menugen.py
make[6]: python: No such file or directory
Since Syslinux 5.00, we can override the python interpreter
used during the build:
https://repo.or.cz/syslinux.git/commitdiff/4dec62ce9c2c0d170f21b3ae2d7c618eb7a30c05
Add the missing host-python3 dependency and override
it in SYSLINUX_BUILD_CMDS.
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/1614446766
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr: fix check-package]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since v2.2 release (commits 8cc36aec912 "doc: De-duplicate readme and
license files" and 9f1622b018ab "doc: Move content out of readme and
create new index page "), the license.rst file at the root of the git
repo is only telling to look at docs/license.rst file.
Let's point the ARM_TRUSTED_FIRMWARE_LICENSE_FILES to the correct file
and modify the .hash file accordingly.
The comment has also been wrong since we bumped from version 1.4 to 2.2
in commit a757d173f1 (boot/arm-trusted-firmware: bump to version
2.2). Drop referencing an explicit version, so that is is never wrong
again.
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
[yann.morin.1998@free.fr: also fix the comment.]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The files added by this commit are associated both to Nicolas Carrier
and myself in the DEVELOPERS, as this commit is based on initial work
from Nicolas.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit adds a new package called python-flask-expects-json, which
also to validate the JSON blurbs submitted to a Flask web
application. A runtime test is added as well, making sure that the
package minimally works with an example Flask application.
The files added by this commit are associated both to Nicolas Carrier
and myself in the DEVELOPERS file, as Nicolas is also interested in
this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit adds a test for python-flask package. As we are about to
add python-flask-expects-json together with a test, it made sense to
also add a test for python-flask itself.
As far as the DEVELOPERS file is concerned, the test files are added
both to the existing maintainer of package/python-flask, as well as to
myself.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit bumps the python-smmap2 and python-gitdb2 packages in
lockstep, as the new version of gitdb2 requires a newer version of
smmap2, but the current version of gitdb2 cannot work with the newer
version of smmap2 (sigh).
Also, upstream the projects have been renamed: gitdb2 is now named
gitdb on PyPi (see https://pypi.org/project/gitdb2/) and smmap2 is now
named smmap (https://pypi.org/project/smmap2/). However, to avoid
needless churn, we don't rename the Buildroot packages, but that
rename is visible in the name of the tarballs being downloaded.
Also, since version 4.0.0, smmap supports only Python 3.x, so we add a
dependency on Python 3.x and drop the test case of gitdb2 on Python
2.x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In filesystems, variables must be prefixed with ROOTFS_, to avoid
ckashing with packages of the same name.
We do not have a package named 'ext2', so we currently have no clash,
but it is still ebtter that the variables be properly namespaced.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch will add an init script that allows
to set a ruleset in /etc/iptables.conf to be loaded
on boot, or flushed on stop, as well as a saving
command to generate a new file.
Signed-off-by: José Pekkarinen <jose.pekkarinen@unikie.com>
[Arnout: change handling of readonly filesystem]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
mpd 0.22.10 terminates with segmentation fault on graphical clients while
retrieving album information. This bug was fixed in version 0.22.11
Tested on x86_64 using M.A.L.P. Android client
Signed-off-by: Andreas Ziegler <br015@umbiko.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Static build with musl fails since bump to version 2020.04 in commit
fe97212976 because LDFLAGS, which contains
-static, is not passed resulting in the following build failure:
/tmp/instance-1/output-1/host/lib/gcc/arm-buildroot-linux-musleabihf/10.3.0/../../../../arm-buildroot-linux-musleabihf/bin/ld: /tmp/instance-1/output-1/host/lib/gcc/arm-buildroot-linux-musleabihf/10.3.0/libgcc.a(_dvmd_lnx.o): in function `__aeabi_ldiv0':
/tmp/instance-1/output-1/build/host-gcc-final-10.3.0/build/arm-buildroot-linux-musleabihf/libgcc/../../../libgcc/config/arm/lib1funcs.S:1499: undefined reference to `raise'
collect2: error: ld returned 1 exit status
Fixes:
- http://autobuild.buildroot.org/results/d71aba27ff0c7711f2cb67261183506f25217a5f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
On attempt to build ntp with glibc 2.34 the following error happens:
-------------------------------->8------------------------------
In file included from .../output/host/lib/gcc/i586-buildroot-linux-gnu/10.3.0/include-fixed/pthread.h:42,
from work_thread.c:13:
work_thread.c:45:57: error: missing binary operator before token "("
45 | #if defined(PTHREAD_STACK_MIN) && THREAD_MINSTACKSIZE < PTHREAD_STACK_MIN
| ^~~~~~~~~~~~~~~~~
-------------------------------->8------------------------------
That's because starting from glibc 2.34 PTHREAD_STACK_MIN gets determined
dynamically in runtime via sysconf(), see [1].
Original fix proposed by Khem Raj in OpenEmbedded, see [2].
[1] https://sourceware.org/git/?p=glibc.git;a=commit;h=5d98a7dae955bafa6740c26eaba9c86060ae0344
[2] https://github.com/openembedded/meta-openembedded/commit/7055c764c83150f9310ce04bcfb19330460582fc
Suggested-by: Artem Panfilov <artemp@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
ee8b680816 ("utils/scanpypi: use python3 explicitly") started to use python3,
thus compatibility can be removed:
from __future__ import print_function
from __future__ import absolute_import
Tested with python3 -m py_compile.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Python 2 is EOL sice 2020 [1], it's still available on distros, but may not
be installed by default (as being replaced by python3).
Thus remove compatibility imports:
from __future__ import print_function
from __future__ import absolute_import
Tested with python3 -m py_compile.
[1] https://www.python.org/doc/sunset-python-2/
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
A heap buffer overflow vulnerability in msadpcm_decode_block of libsndfile
1.0.30 allows attackers to execute arbitrary code via a crafted WAV file.
https://nvd.nist.gov/vuln/detail/CVE-2021-3246
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes the following security issues:
- CVE-2021-22945: UAF and double-free in MQTT sending
When sending data to an MQTT server, libcurl could in some circumstances
erroneously keep a pointer to an already freed memory area and both use
that again in a subsequent call to send data and also free it again.
https://curl.se/docs/CVE-2021-22945.html
- CVE-2021-22946: Protocol downgrade required TLS bypassed
A user can tell curl to require a successful upgrade to TLS when speaking
to an IMAP, POP3 or FTP server (--ssl-reqd on the command line or
CURLOPT_USE_SSL set to CURLUSESSL_CONTROL or CURLUSESSL_ALL with libcurl).
This requirement could be bypassed if the server would return a properly
crafted but perfectly legitimate response.
This flaw would then make curl silently continue its operations without
TLS contrary to the instructions and expectations, exposing possibly
sensitive data in clear text over the network.
https://curl.se/docs/CVE-2021-22946.html
- CVE-2021-22947: STARTTLS protocol injection via MITM
When curl connects to an IMAP, POP3, SMTP or FTP server to exchange data
securely using STARTTLS to upgrade the connection to TLS level, the server
can still respond and send back multiple responses before the TLS upgrade.
Such multiple "pipelined" responses are cached by curl. curl would then
upgrade to TLS but not flush the in-queue of cached responses and instead
use and trust the responses it got before the TLS handshake as if they
were authenticated.
Using this flaw, it allows a Man-In-The-Middle attacker to first inject
the fake responses, then pass-through the TLS traffic from the legitimate
server and trick curl into sending data back to the user thinking the
attacker's injected data comes from the TLS-protected server.
Over POP3 and IMAP an attacker can inject fake response data.
https://curl.se/docs/CVE-2021-22947.html
In addition, 7.79.1 fixes a number of regressions in 7.79.0:
https://daniel.haxx.se/blog/2021/09/22/curl-7-79-1-patched-up-and-ready/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The file access protection built into Ghostscript proved insufficient for
the "%pipe%" PostScript device, when combined with Ghostscript's requirement
to be able to create and control temporary files in the conventional
temporary file directories (for example, "/tmp" or "/temp). This exploit is
restricted to Unix-like systems (i.e., it doesn't affect Windows). The most
severe claimed results are only feasible if the exploit is run as a "high
privilege" user (root/superuser level) \u2013 a practice we would discourage
under any circumstances.
For more details, see the advisory:
https://ghostscript.com/CVE-2021-3781.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Lynx through 2.8.9 mishandles the userinfo subcomponent of a URI, which
allows remote attackers to discover cleartext credentials because they may
appear in SNI data.
https://lists.nongnu.org/archive/html/lynx-dev/2021-08/msg00002.html
Upstream unfortunately does not provide a public VCS (only source
snapshots), so fetch the security patch from Debian.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This is a minor release which provides fixes for CVE-2021-30858 and
a number of other potential security issues without an associated CVE.
Patch "0001-Add-ldp-and-stp-support-for-FP-registers-plus-some-b.patch"
is deleted as it has been included in this release.
Full release notes can be found at:
https://webkitgtk.org/2021/09/17/webkitgtk2.32.4-released.html
An accompanying security advisory has been published at:
https://webkitgtk.org/security/WSA-2021-0005.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This is a minor release which provides fixes for CVE-2021-30858 and
a number of other potential security issues without an associated CVE.
Patch "0001-Add-ldp-and-stp-support-for-FP-registers-plus-some-b.patch"
is deleted as it has been included in this release.
Full release notes can be found at:
https://wpewebkit.org/release/wpewebkit-2.32.4.html
An accompanying security advisory has been published at:
https://wpewebkit.org/security/WSA-2021-0005.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- SECURITY: Stop splitting on unicode separators in git references,
which could be maliciously used to install a different revision on the
repository. (#9827)
- Update hash of LICENSE.txt (update in year)
- Update indentation in hash file (two spaces)
https://pip.pypa.io/en/stable/news/#v21-2-4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
python-protobuf no longer supports python2, so depend on
BR2_PACKAGE_PYTHON3. Reverse dependencies already depend on
python3.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure with uclibc-ng raised since bump to
version 1.17 in commit 9badccc9d4:
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/lib/gcc/xtensa-buildroot-linux-uclibc/10.3.0/../../../../xtensa-buildroot-linux-uclibc/bin/ld: src/sae.o: in function `sae_rx_authenticate':
sae.c:(.text+0xd74): undefined reference to `reallocarray'
Fixes:
- http://autobuild.buildroot.org/results/c6d3f86282c44645b4f1c61882dc63ccfc8eb35a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The gdbinit supplied by Buildroot does two things:
A. specify the sysroot where gdb can find shared libraries
B. mark the sysroot as a 'safe path' for its auto-load feature, to make sure
that pretty printers for libstdc++.so are added automatically (see commit
6fb3216a80)
When debugging a core file, and the gdbinit file is specified via '-x'
rather than '-ix', then the order of these settings matters: If you first
set the sysroot, then gdb will immediately start finding the shared
libraries it needs for the core file, detect libstdc++ and its associated
libstdc++-gdb.py file, then give a big warning about safe paths:
warning: File ".../i686-buildroot-linux-gnu/sysroot/lib/libstdc++.so.6.0.24-gdb.py"
auto-loading has been declined by your `auto-load safe-path' set
to "$debugdir:$datadir/auto-load".
To enable execution of this file add
add-auto-load-safe-path .../i686-buildroot-linux-gnu/sysroot/lib/libstdc++.so.6.0.24-gdb.py
line to your configuration file "/home/me/.gdbinit".
To completely disable this security protection add
set auto-load safe-path /
line to your configuration file "/home/me/.gdbinit".
For more information about this security protection see the
"Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
info "(gdb)Auto-loading safe path"
and the pretty printing code is not loaded. This is because the second
line from the gdbinit file was not yet parsed at this point.
By changing the order (first configuring the safe path, then setting the
sysroot), this issue does not appear and everything is as expected.
Note that when '-ix' were used instead of '-x' to pass the gdbinit file to
gdb, then the order would not matter, because the entire gdbinit file would
be parsed before considering the core file.
However, even though the Buildroot manual now suggests '-ix', users may not
have noticed this change and continue to use '-x'.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
A gdbinit file passed via '-x' will be read _after_ parsing any
object/core file passed on the command-line. In cross-compilation context,
this is particularly a problem when loading a core file, because without the
'sysroot' specified in the gdbinit file, it will give a lot of warnings,
like:
warning: .dynamic section for "/lib/libstdc++.so.6" is not at the expected address (wrong library or version mismatch?)
warning: .dynamic section for "/lib/librt.so.1" is not at the expected address (wrong library or version mismatch?)
warning: .dynamic section for "/lib/libm.so.6" is not at the expected address (wrong library or version mismatch?)
warning: .dynamic section for "/lib/libgcc_s.so.1" is not at the expected address (wrong library or version mismatch?)
warning: .dynamic section for "/lib/libc.so.6" is not at the expected address (wrong library or version mismatch?)
warning: .dynamic section for "/lib/ld-linux.so.2" is not at the expected address (wrong library or version mismatch?)
warning: .dynamic section for "/lib/libanl.so.1" is not at the expected address (wrong library or version mismatch?)
warning: .dynamic section for "/lib/libdl.so.2" is not at the expected address (wrong library or version mismatch?)
warning: .dynamic section for "/lib/libpthread.so.0" is not at the expected address (wrong library or version mismatch?)
warning: .dynamic section for "/usr/lib/libz.so.1" is not at the expected address (wrong library or version mismatch?)
warning: .dynamic section for "/lib/libnss_files.so.2" is not at the expected address (wrong library or version mismatch?)
warning: Could not load shared library symbols for 17 libraries, e.g. [...]
Use the "info sharedlibrary" command to see the complete listing.
Do you need "set solib-search-path" or "set sysroot"?
In contrast, the '-ix' option will load the specified gdbinit file _before_
parsing object/core files. This will remove said warnings.
See also: https://sourceware.org/bugzilla/show_bug.cgi?id=28330
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The example media-session pipewire session manager requires
pipewire to be built with examples enabled, add support for
enabling this while depending on examples being enabled.
To simplify adding support for additional session managers in
the future such as wireplumber we pass a comma separated list
to the -Dsession-managers meson config option. This also will
ensure that systemd services that depend on media-session are
only installed if media-session support is enabled.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
To avoid spending some time to build the x86_64 toolchain (~20min),
switch to corei7 cpu (Nahalem) and use the prebuilt Bootlin toolchain.
We have to use the "stable" Bootlin toolchain to use the same kernel version
for the toolchain kernel headers and the running kernel.
With the "bleeding-edge" toolchain we have the "kernel too old" issue
(running kernel 4.19 vs kernel headers 5.4)
Runtime tested locally.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Switch from the Buildroot internal toolchain for armv5 to
the prebuilt Bootlin external toolchain.
The test doesn't require to build a toolchain, there was
no prebuilt glibc toolchain recent enough at the time this
test has been introduced.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This test already use builtin kernel provided by the testsuite infra:
self.emulator.boot(arch="armv7",
kernel="builtin",
options=["-initrd", img])
But a second kernel is build from the its defconfig. This second kernel
is not used by the test.
The TestRust (using BR2_PACKAGE_HOST_RUST=y) is really long to build,
save some cpu time by removing the kernel build.
This unused kernel (based on 4.11.3 release) doesn't even build with
host gcc >= 10.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The kernel 5.5.7 curently used by the test doesn't build with host
gcc >= 10 due the gcc default -fno-common. See GCC 10 porting guide [1].
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x20): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
But we can't just update this test to the next linux kernel LTS 5.10.y since
the minimum gcc version has been updated to gcc 4.9 since 5.8 kernel [2]
and the Sourcery CodeBench ARM 2014.05 is used (gcc 4.8 based).
Enable arm cortex A9 and VFP support to switch to the ARM arm prebuilt
toolchain (the Bootlin toolchain could be used).
While at it use the prebuilt buildin kernel for the vexpress target
recently updated to 5.10.7.
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/1564202094
[1] https://gcc.gnu.org/gcc-10/porting_to.html
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6ec4476ac82512f09c94aff5972654b70f3772b2
[3] 3cf2782906
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The kernel 4.16.7 curently used by the test doesn't build with host
gcc >= 10 due the gcc default -fno-common. See GCC 10 porting guide [1].
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x20): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
Bump to the next LTS release.
[1] https://gcc.gnu.org/gcc-10/porting_to.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The kernel 4.16.7 curently used by the test doesn't build with host
gcc >= 10 due the gcc default -fno-common. See GCC 10 porting guide [1].
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x20): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
Bump to the next LTS release.
[1] https://gcc.gnu.org/gcc-10/porting_to.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The kernel 4.11.3 curently used by the test doesn't build with host
gcc >= 10 due the gcc default -fno-common. See GCC 10 porting guide [1].
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x20): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
Bump to the next LTS release.
[1] https://gcc.gnu.org/gcc-10/porting_to.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The kernel 4.11.3 curently used by the test doesn't build with host
gcc >= 10 due the gcc default -fno-common. See GCC 10 porting guide [1].
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x20): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
Bump to the next LTS release.
[1] https://gcc.gnu.org/gcc-10/porting_to.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update to version 0.10.1, which fixes the build when the DRM platform
module is enabled, fixes handling of absolute pointer events, and makes
the headless platform optional.
Although the headless platform is optional, Buildroot keeps it enabled
unconditionally (as previously) because the wpebackend-fdo dependency
is always needed anyway because Buildroot does not include any other
WPE backend.
Release notes:
https://wpewebkit.org/release/cog-0.10.1.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Also create a pipewire user, which is used for systemd service. There is
no sysvinit start script at the moment, but if there were, it should
also take care of changing the uid to pipewire before starting the
daemon.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add simple mixer python bindings to build when "Python support for
alsa-lib" is active. smixer-python is the only python module which
exists in alsa-lib. It is compatible with Python2 and Python3.
Signed-off-by: Illia Bitkov <illia.bitkov@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Added patch fixes linkage of libgc with external libtomic-ops.
Mono uses bundeled bdwgc which doesn't link external libatomic-ops.
Patch is a fix cherry-picked from bdwgc upstream.
Problem found on ARMv5 processors, on newer ARM processors
it uses header based functions and doesn't need built library.
Error:
/home/buildroot/autobuild/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/9.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: ../../external/bdwgc/.libs/libgc.a(gc.o): in function `GC_steal_mark_stack':
gc.c:(.text+0x2020): undefined reference to `AO_store_full_emulation'
Fixes:
http://autobuild.buildroot.net/results/ebc54e5dea63aca21a4072d294fdede41de559c7http://autobuild.buildroot.net/results/6d10a4bd43fbc9c1d3fa26d5eef394c8023cb85f
Signed-off-by: Illia Bitkov <illia.bitkov@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
license is now LGPL-3.0+ for both talloc and pytalloc. Therefore, remove
pytalloc.h from the license files.
Signed-off-by: David GOUARIN <david.gouarin@thalesgroup.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
If the toolchain does not have threads (e.g. br-arm-full-nothread),
compilation fails:
In file included from /home/fail/br-test-pkg/br-arm-full-nothread/build/libressl-3.3.3/crypto/cryptlib.c:117:
/home/fail/br-test-pkg/br-arm-full-nothread/build/libressl-3.3.3/crypto/../include/compat/pthread.h:114:15: fatal error: pthread.h: No such file or directory
114 | #include_next <pthread.h>
| ^~~~~~~~~~~
compilation terminated.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
COPYING was updated with a copy of the openssl licence since libgit2 now
include openssl headers so it can dlopen it:
openssl: dynamically load libssl and symbols (optionally)
Provide an interface around OpenSSL to dynamically load the
libraries and symbols, so that users can distribute a libgit2
library that is not linked directly against OpenSSL. This enables
users to target multiple distributions with a single binary.
This mechanism is optional and disabled by default. Configure cmake
with -DUSE_HTTPS=OpenSSL-Dynamic to use it.
We do not use that option so the headers are not even used, plus the
headers are not installed on the target anyway, so this patch includes
no license changes.
Upstream also stopped providing release tarballs, relying on
github-generated tarballs instead.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Plus, use two spaces for indentation in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
License updated with a minor change at the copyright year.
SETUP_TYPE changed to setuptools.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Don't require wayland-scanner if tests are disabled to avoid the
following build failure raised since bump to version 1.23 in commit
7eedc9cc1e:
Build-time dependency wayland-scanner found: NO (tried pkgconfig and cmake)
../output-1/build/wayland-protocols-1.23/meson.build:11:0: ERROR: Dependency "wayland-scanner" not found, tried pkgconfig and cmake
Fixes:
- http://autobuild.buildroot.org/results/2744e50465a9cd9d3726d23298ad6c943ef49a21
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr:
- do not default to 'y'
- add comment
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
mesa3d uses very big switch statements, which causes the build to fail
on m68k, beause the offsets there are only 16-bit.
We fix that by using -mlong-jump-table-offsets on m68k, to use 32-bit
offsets for switch statements, but this is only available starting with
gcc 7 [0] [1].
Fixes:
http://autobuild.buildroot.net/results/60c4653c2a93125edbdd0beb43cd47301643464a/
Note: we have two packages that select mesa3d, but:
package/intel-mediadriver/
-> already depends on x86_64, so implies !m68k
package/x11r7/xdriver_xf86-video-imx-viv/
-> imx is an ARM, but xdriver_xf86-video-imx-viv is missing
a depends on BR2_arm (although the comments do have that
dependency). However, it depends on other imx related
packages, and they depend on either arm or aarch64, so
that implies !m68k.
As such, we do not need to propagate that new dependency.
[0] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=57583#c15
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=57583#c16
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr:
- add comment
- reword commit log, add BZ references, add non-propagation notes
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We need to backport a few upstream still-pending PRs, to fix
cross-compilation, out-of-tree installation, and to relax requirements
on some tools.
The python support PR is backported too, but because python support was
not tested, it is forcibly disabled.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr:
- expand commit log with explanations
- backport upstream 253 (python) too
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump libfuse3 to version 3.10.5 and remove local patch that has been
upstreamed.
Release notes:
Various improvements to make unit tests more robust.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure with glibc >= 2.34:
ulockmgr_server.c:127:12: error: conflicting types for 'closefrom'; have 'int(int)'
127 | static int closefrom(int minfd)
| ^~~~~~~~~
In file included from ulockmgr_server.c:14:
/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/unistd.h:363:13: note: previous declaration of 'closefrom' with type 'void(int)'
363 | extern void closefrom (int __lowfd) __THROW;
| ^~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/3769b18ca804fba3b5974af799972a7d889b39a6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The AKA backend for 3GPP2 requires libgmp (see
https://wiki.strongswan.org/projects/strongswan/wiki/Autoconf). Since
the AKA backend for 3GPP2 is included by BR2_PACKAGE_STRONGSWAN_EAP,
when selecting a crypto backend different from
BR2_PACKAGE_STRONGSWAN_GMP, there is no guarantee the gmp package is
selected as well. When doing so, make fails since the package is in the
dependency chain but not selected:
$ make
Makefile:585: *** gmp is in the dependency chain of strongswan that has added it to its _DEPENDENCIES variable without selecting it or depending on it from Config.in. Stop.
make: *** [Makefile:23: _all] Error 2
To fix this, select BR2_PACKAGE_GMP when selecting BR2_PACKAGE_STRONGSWAN_EAP.
Signed-off-by: Martin Elshuber <martin.elshuber@theobroma-systems.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following security issues:
- CVE-2021-28902: In function read_yin_container() in libyang <= v1.0.225,
it doesn't check whether the value of retval->ext[r] is NULL. In some
cases, it can be NULL, which leads to the operation of
retval->ext[r]->flags that results in a crash.
- CVE-2021-28903: A stack overflow in libyang <= v1.0.225 can cause a denial
of service through function lyxml_parse_mem(). lyxml_parse_elem()
function will be called recursively, which will consume stack space and
lead to crash.
- CVE-2021-28904: In function ext_get_plugin() in libyang <= v1.0.225, it
doesn't check whether the value of revision is NULL. If revision is NULL,
the operation of strcmp(revision, ext_plugins[u].revision) will lead to a
crash.
- CVE-2021-28905: In function lys_node_free() in libyang <= v1.0.225, it
asserts that the value of node->module can't be NULL. But in some cases,
node->module can be null, which triggers a reachable assertion (CWE-617).
- CVE-2021-28906: In function read_yin_leaf() in libyang <= v1.0.225, it
doesn't check whether the value of retval->ext[r] is NULL. In some cases,
it can be NULL, which leads to the operation of retval->ext[r]->flags that
results in a crash.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Changelog (since 1.14, from [1]):
ver 1.17:
Fix issue with sending additional and vendor IEs.
Fix issue with IE ordering for 802.11-2020 support.
Fix issue with frequency update on channel switch events.
Fix issue with drivers and handling of IF_OPER_UP setting.
ver 1.16:
Fix issue with writing provisioning files with a passphrase.
Add support for Authenticator & Supplicant RSN Extension elements.
Add support for handling Transition Disable info.
Add support for SAE Hash-to-Element feature.
ver 1.15:
Add support for FT-over-DS procedure with multiple BSS.
Add support for estimation of VHT RX data rate.
Add support for exporting Daemon information.
[1] https://git.kernel.org/pub/scm/network/wireless/iwd.git/tree/ChangeLog
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Changelog (since 0.41, from [1]):
ver 0.43:
Add support for DHCP Rapid Commit feature.
Add support for DHCP authoritative mode feature.
ver 0.42:
Add support for constant time security functions.
Add support for manipulating DHCP leases.
[1] https://git.kernel.org/pub/scm/libs/ell/ell.git/tree/ChangeLog
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure with glibc >= 2.34:
/tmp/instance-0/output-1/host/lib/gcc/s390x-buildroot-linux-gnu/10.3.0/../../../../s390x-buildroot-linux-gnu/bin/ld: CMakeFiles/egltrace.dir/dlsym.cpp.o: in function `dlsym':
dlsym.cpp:(.text+0x34): undefined reference to `__libc_dlopen_mode'
/tmp/instance-0/output-1/host/lib/gcc/s390x-buildroot-linux-gnu/10.3.0/../../../../s390x-buildroot-linux-gnu/bin/ld: dlsym.cpp:(.text+0x46): undefined reference to `__libc_dlsym'
Fixes:
- http://autobuild.buildroot.org/results/ac5e5b1e30249ae0fb8b9179338b47c60c026bcc
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
CVE-2021-29221 is a Windows specific issue:
A local privilege escalation vulnerability was discovered in Erlang/OTP
prior to version 23.2.3. By adding files to an existing installation's
directory, a local attacker could hijack accounts of other users running
Erlang programs or possibly coerce a service running with "erlsrv.exe" to
execute arbitrary code as Local System. This can occur only under specific
conditions on Windows with unsafe filesystem permissions.
So ignore it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following security issue:
- CVE-2021-40529: The ElGamal implementation in Botan through 2.18.1, as
used in Thunderbird and other products, allows plaintext recovery because,
during interaction between two cryptographic libraries, a certain
dangerous combination of the prime defined by the receiver's public key,
the generator defined by the receiver's public key, and the sender's
ephemeral exponents can lead to a cross-configuration attack against
OpenPGP
For more details, see the upstream bug and issue writeup:
- https://github.com/randombit/botan/pull/2790
- https://ibm.github.io/system-security-research-updates/2021/07/20/insecurity-elgamal-pt1
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following security issues:
- CVE-2021-37701: Arbitrary File Creation/Overwrite via insufficient symlink
protection due to directory cache poisoning using symbolic links
- CVE-2021-37712: Arbitrary File Creation/Overwrite via insufficient symlink
protection due to directory cache poisoning using symbolic links
- CVE-2021-37713: Arbitrary File Creation/Overwrite on Windows via
insufficient relative path sanitization
- CVE-2021-39134: UNIX Symbolic Link (Symlink) Following in @npmcli/arborist
- CVE-2021-39135: UNIX Symbolic Link (Symlink) Following in @npmcli/arborist
For more details, see the advisory:
https://nodejs.org/en/blog/vulnerability/aug-2021-security-releases2/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As the github repository has changed from github.com/AdoptOpenJDK/ to
github.com/adoptium, both versions are updated in the same patch.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
For the i.MX8 often an Image.gz is built. With these changes, if
BR2_LINUX_KERNEL_IMAGEGZ=y, the correct Image.gz file is now put into
the generated image instead of falling back to the non-existent zImage.
Signed-off-by: Hanspeter Portner <dev@open-music-kontrollers.ch>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The Key Distribution Center (KDC) in MIT Kerberos 5 (aka krb5) before
1.18.5 and 1.19.x before 1.19.3 has a NULL pointer dereference in
kdc/do_tgs_req.c via a FAST inner body that lacks a server field.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 148e695e37 (package/kodi: bump version to 19.0-Matrix) extended
the set of required libraries for various "platform" backends, by
selecting those libraries from the blind options. For example, we have:
config BR2_PACKAGE_KODI_PLATFORM_SUPPORTS_GBM
bool
default y
depends on [...]
select BR2_PACKAGE_LIBINPUT
[...]
However, that option is true as soon as the requirements are met (the
depends on), even when Kodi itself is not enabled.
This means that extra libraries are pulled in to the build, even when
not required.
We fix that by moving the actual selects to the main symbol, along with
the proper conditions. This means that we have two lines that select
libxbcommon, under two different conditions; we could make that a single
select, but the codition would need to be on two lines anyway, so meh...
This is not an ideal solution, because it is a bit ugly, but:
1) adding three new blind options just for the select is kinda extreme
and superfluous;
2) our Kodi packaging is already a bit ugly anyway.
Fixes: #14206
Reported-by: Thomas Ruschival <t.ruschival@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
In order to add support for EFI-compatible ISO9660 images in future
patches, this commit switch the ISO9660 logic to use xorriso instead of
cdrkit. Indeed the genimageiso tool from cdrkit doesn't have the
--efi-boot option needed to generate an image compatible with EFI BIOS.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[yann.morin.1998@free.fr: drop superfluous tool name from variable]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We will soon use xorriso in the ISO9660 image generation support, and
this requires having zlib support in host-xorriso.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure with gcc 4.8 raised since bump to
version 0.6.23 in commit e2f8050976:
exif-gps-ifd.c: In function 'exif_get_gps_tag_info':
exif-gps-ifd.c:62:3: error: 'for' loop initial declarations are only allowed in C99 mode
for (int i = 0; i < sizeof(exif_gps_ifd_tags) / sizeof(ExifGPSIfdTagInfo); ++i) {
^
exif-gps-ifd.c:62:3: note: use option -std=c99 or -std=gnu99 to compile your code
Fixes:
- http://autobuild.buildroot.org/results/7dd222e06d1e6611449fb8fe7516817c9ad43d65
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2021-3634: A flaw has been found in libssh in versions prior to
0.9.6. The SSH protocol keeps track of two shared secrets during the
lifetime of the session. One of them is called secret_hash and the other
session_id. Initially, both of them are the same, but after key
re-exchange, previous session_id is kept and used as an input to new
secret_hash. Historically, both of these buffers had shared length
variable, which worked as long as these buffers were same. But the key
re-exchange operation can also change the key exchange method, which can
be based on hash of different size, eventually creating "secret_hash" of
different size than the session_id has. This becomes an issue when the
session_id memory is zeroed or when it is used again during second key
re-exchange.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
protobuf moved from the google org to protocolbuffers in 2018.
There is a redirect but we should use the official url.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
pause() is defined in glibc since the very early times; it appears in
upstream commit 28f540f45bba (initial import) in 1995 [0].
Bluez has been defining a function named pause() for ages too, since
comit caab74c97542 (media: Implement new callbacks for pass-through
operations) in 2013 [1]
With the recent bump to glibc 2.34.xxx, the build now fails because the
two pause() clash:
profiles/audio/media.c:1284:13: error: conflicting types for 'pause'
1284 | static bool pause(void *user_data)
| ^~~~~
In file included from /tmp/instance-0/output-1/per-package/bluez5_utils/host/s390x-buildroot-linux-gnu/sysroot/usr/include/bits/sigstksz.h:24,
from /tmp/instance-0/output-1/per-package/bluez5_utils/host/s390x-buildroot-linux-gnu/sysroot/usr/include/signal.h:328,
from /tmp/instance-0/output-1/per-package/bluez5_utils/host/bin/../s390x-buildroot-linux-gnu/sysroot/usr/include/glib-2.0/glib/gbacktrace.h:36,
from /tmp/instance-0/output-1/per-package/bluez5_utils/host/bin/../s390x-buildroot-linux-gnu/sysroot/usr/include/glib-2.0/glib.h:34,
from profiles/audio/media.c:21:
/tmp/instance-0/output-1/per-package/bluez5_utils/host/s390x-buildroot-linux-gnu/sysroot/usr/include/unistd.h:489:12: note: previous declaration of 'pause' was here
489 | extern int pause (void);
| ^~~~~
The culprit is indeed glibc 2.34, as can be seen in this result matrix:
\ bluez5_utils
glibc \ 5.60 | 5.61
-------\-------+--------
2.33 | OK | OK
-------+-------+--------
2.34 | KO | KO
Even though we first bumped to glibc 2.34, then to blues5_utils 5.61,
we did not notice build issues with bluez5_utils 5.60 because the two
bumps were too close to each other for the failure to trigger in the
autobuilders.
The underlying reason that pause() is now causing issues with glibc 2.34
is not obvious: glibc is a big beast, and finding such issues is not
easy. However, we can see that the pause() provided by NPTL has been
dropped in favour of the generic one, so maybe this is causing symbol
visibility or weakness to change or something...
We fix that by renaming the local pause() in bluez5_utils with a
namespace-prefix, like some other functions there already have.
Fixes:
- http://autobuild.buildroot.org/results/c4f/c4fbface34be8815838fd7201621d7a8fddd32c5/
- http://autobuild.buildroot.org/results/62b/62b88740f19fbe4a1ad7959dc141d539eb88c1f8/
[0] https://sourceware.org/git/?p=glibc.git;a=commit;h=28f540f45bbacd939bfd07f213bcad2bf730b1bf
[1] https://github.com/bluez/bluez/commit/caab74c97542a56b591f0b16b44ab6ba4b40f0f5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: extend commit log with the glibc culprit]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* add changelog and Signed-off-by to patches
* use correct name for patch 0002
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
xdg is needed (and can't be make optional as it is unconditionally used
in pulseaudio.fc) to fix the following build failure raised since commit
bf44a11cf6:
Compiling targeted policy.33
env LD_LIBRARY_PATH="/tmp/instance-0/output-1/host/lib:/tmp/instance-0/output-1/host/usr/lib" /tmp/instance-0/output-1/host/usr/bin/checkpolicy -c 33 -U deny -S -O -E policy.conf -o policy.33
policy/modules/apps/pulseaudio.te:44:ERROR 'attribute xdg_config_type is not declared' at token ';' on line 317285:
#line 44
typeattribute pulseaudio_xdg_config_t xdg_config_type;
checkpolicy: error(s) encountered while parsing configuration
make[1]: *** [Rules.monolithic:79: policy.33] Error 1
Fixes:
- http://autobuild.buildroot.org/results/818219c0f722080d9f6ef778fdc50e34dd4187ab
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update download to use official gitlab source url.
Drop patches that are now upstream.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The mainline U-Boot can create an i.MX specific firmware image (e.g. flash.bin).
For this the i.MX firmware files (DDR, HDMI) must be in the toplevel directory.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
[yann.morin.1998@free.fr: simplify hook]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The version bump [1] for the rpm package to v4.17 added the newly
required dependency to Lua; however, the change limited support to only
v5.3 (and not higher). Correcting support for v5.3 or higher by making
a dependency on the Lua package and omitting older versions which are
not supported (specifically, the v5.1 series)
[1]: 429e247b86
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
openjdk needs host gcc >= 4.9 since bump to version 16.0.1+9 in commit
057e27029c and
https://github.com/openjdk/jdk/commit/2a8f92e7e71f7c1ed4010fa31f4b413758c8752a:
configure: Using gcc BuildC compiler version 4.8.5 [cc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44)]
configure: Using gcc BuildC++ compiler version 4.8.5 [g++ (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44)]
configure: Using gcc build linker version 2.27 [GNU ld version 2.27-44.base.el7]
[...]
g++: error: unrecognized command line option '-std=c++14'
Add a dependency on host gcc >= 4.9 for the OpenJDK 16 version only, so
that users can still use OpenJDK 11 on older distributions.
Fixes:
- http://autobuild.buildroot.org/results/7072308d148ccb8237180729551df65c87a76f11
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: limit the dependency to OpenJDK 16]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following recursive dependency added with commit
429e247b86:
package/openssl/Config.in:4:error: recursive dependency detected!
package/openssl/Config.in:4: symbol BR2_PACKAGE_OPENSSL is selected by BR2_PACKAGE_LIBGCRYPT
package/libgcrypt/Config.in:1: symbol BR2_PACKAGE_LIBGCRYPT is selected by BR2_PACKAGE_OPENSSL
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If the ATF binary is used by U-Boot, the file is expected to be in the
toplevel directory.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In mainline u-boot more and more imx8 boards are switched to binman
to create the imx specific image (flash.bin). To support this the
(lp)ddr firmware training files are needed. For this to work all files
should be made available to the U-Boot build.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Force relative file path resolution of DEVELOPERS file entries to use
forward-slash separators since pattern matching assumes forward slashes.
This is to help permit uses invoking `get-developers` on Platforms where
`os.sep` may not be a forward slash.
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Adjust the inclusion of the rpm2archive command as an option, to allow a
developer to opt-out of building/including the command if it is not
desired/needed for the target.
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix MKIMAGE_ARCH handling to avoid the following build failure:
/home/buildroot/autobuild/instance-0/output-1/build/host-uboot-tools-2021.07/tools/mkimage -C none -A openrisc -T script -d /home/buildroot/autobuild/instance-0/output-1/boot_script.txt /home/buildroot/autobuild/instance-0/output-1/build/host-uboot-tools-2021.07/tools/boot.scr
Invalid architecture, supported are:
alpha Alpha
arc ARC
arm ARM
arm64 AArch64
avr32 AVR32
blackfin Blackfin
ia64 IA64
invalid Invalid ARCH
m68k M68K
microblaze MicroBlaze
mips MIPS
mips64 MIPS 64 Bit
nds32 NDS32
nios2 NIOS II
or1k OpenRISC 1000
powerpc PowerPC
riscv RISC-V
s390 IBM S390
sandbox Sandbox
sh SuperH
sparc SPARC
sparc64 SPARC 64 Bit
x86 Intel x86
x86_64 AMD x86_64
xtensa Xtensa
Strangely enough, we only have autobuilder failures since July 2021 even
as or1k has been used since the addition of openriscv support in 2012:
https://github.com/u-boot/u-boot/commit/3ddcaccda3824e1c7f7266d543e4c0eb3ea9851c
For x86)64, we incorrectly mangle it to x86.
Finally, the comment about mips64 is wrong: mips64 *is* a valid
archtecture, and we anyway had no code to tweak that case.
Fixes:
- http://autobuild.buildroot.org/results/c3f0f2a3fb87d74bfdaccf9b94c66f0b5bae7520
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: extend commit log for mips64 and x86_64]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Build is broken since bump to version 3.0.0 in commit
45524f10cd because libxslt is needed
instead of expat since
https://github.com/arut/nginx-dav-ext-module/commit/37772c545314aa4a250066f4e7cbc8806d406fa8:
adding module in /tmp/instance-0/output-1/build/nginx-dav-ext-3.0.0
+ ngx_http_dav_ext_module was configured
checking for PCRE library ... found
checking for PCRE JIT support ... found
Package libxslt was not found in the pkg-config search path.
Perhaps you should add the directory containing `libxslt.pc'
to the PKG_CONFIG_PATH environment variable
Package 'libxslt', required by 'virtual:world', not found
Package libxslt was not found in the pkg-config search path.
Perhaps you should add the directory containing `libxslt.pc'
to the PKG_CONFIG_PATH environment variable
Package 'libxslt', required by 'virtual:world', not found
checking for libxslt ... not found
checking for libxslt in /usr/local/ ... not found
checking for libxslt in /usr/pkg/ ... not found
checking for libxslt in /opt/local/ ... not found
./configure: error: the HTTP XSLT module requires the libxml2/libxslt
libraries. You can either do not enable the module or install the libraries.
Fixes:
- http://autobuild.buildroot.org/results/8735d20ca7ccf4eda2f79f9400bed70474855b40
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that the qemu package has the BR2_PACKAGE_HOST_QEMU_USER_MODE_ARGS string,
the gobject-introspection g-ir-scanner-qemuwrapper script can pass that string
to qemu.
Add the QEMU_USERMODE_ARGS to g-ir-scanner-qemuwrapper.in and unconditionally
sed @QEMU_USERMODE_ARGS@ with BR2_PACKAGE_HOST_QEMU_USER_MODE_ARGS.
Fixes:
http://autobuild.buildroot.org/results/2e9dbc0d36600c09fa9e59ab1b1903c9f40661e8
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Arnout: don't add QEMU_USERMODE_ARGS variable to shell script]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
For specific architectures, running qemu in user mode without any additional
options may fail if the host processor does not have the necessary instructions
to properly run qemu in user mode, which results in the following error:
"qemu: uncaught target signal 4 (Illegal instruction) - core dumped"
CoreI7 is one such architecture that has had consistent auto-build failures.
Add a new string in qemu/Config.in.host: BR2_PACKAGE_HOST_QEMU_USER_MODE_ARGS.
The default for the Corei7 architecture is directly from the OpenEmbedded
project found in meta/conf/machine/include/x86/tune-corei7.inc:
"-cpu Nehalem,check=false." Other architectures may be added to this string at
a later date if other failures occure.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Add double quotes to prevent globbing and word splitting.
- Add indentations of continuation lines.
- Disable SC2181 and SC2016 as we explicitly do not want the variables
expanded in the echo.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
If GIR_EXTRA_LIBS_PATH is empty, the LD_LIBRARY_PATH variable is
":.libs:$(dirname $0)/../lib:$(dirname $0)/../../lib".
As discussed with Yann Morin, add a new variable, "GOI_LIBRARY_PATH" and
prepend ${GIR_EXTRA_LIBS_PATH:+${GIR_EXTRA_LIBS_PATH}:} to the path to fix the
above bug.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following static build failure on musl which is raised because
the "Check for directory libraries" in configure wrongly adds -DNO_DIR
when no directory library is needed:
/tmp/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc -c -D_FILE_OFFSET_BITS=64 -O2 -g0 -static -I. -DUNIX -DUIDGID_NOT_16BIT -DBZIP2_SUPPORT -DLARGE_FILE_SUPPORT -DUNICODE_SUPPORT -DNO_MKTIME -DNO_DIR -DHAVE_DIRENT_H -DHAVE_TERMIOS_H unix/unix.c
unix/unix.c:70:14: error: conflicting types for 'DIR'
70 | typedef FILE DIR;
| ^~~
Fixes:
- http://autobuild.buildroot.org/results/83a6e0c8c4ad026cb0261246e3b1a80d754454bd
Patch not sent upstream since upstream is dead.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update to gcc 10.3, gdb 10.2, binutils 2.36.1, glibc 2.33.
Remove BR2_TOOLCHAIN_HAS_NATIVE_RPC since the support for obsolete
RPC was finally dropped in glibc in 2.32 (2020-08-04).
See "Release Note":
https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads#
Tested with qemu_aarch64_virt_defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update to gcc 10.3, gdb 10.2, binutils 2.36.1, glibc 2.33.
Remove BR2_TOOLCHAIN_HAS_NATIVE_RPC since the support for obsolete
RPC was finally dropped in glibc in 2.32 (2020-08-04).
See "Release Note":
https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads#
Tested with qemu_arm_vexpress_defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Switch to meson-package to fix the following build failure raised since
bump of gobject-introspection to version 1.68.0 in commit
abc110e362:
Could not find GIR file 'Gio-2.0.gir'; check XDG_DATA_DIRS or use --includedir
error parsing file Polkit-1.0.gir: Failed to parse included gir Gio-2.0
If the above error message is about missing .so libraries, then setting up GIR_EXTRA_LIBS_PATH in the .mk file should help.
Typically like this: PKG_MAKE_ENV += GIR_EXTRA_LIBS_PATH="$(@D)/.libs"
Fixes:
- http://autobuild.buildroot.org/results/26bcb21900b403db690d6005dbef0a76ff494d6c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump the version to 1661 and remove the patch
0002-Remove-unused-global-variable-to-fix-compilation-with-GCC-10.patch.
This patch is no longer needed because the fix has been added upstream.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
environment-setup uses BASH_SOURCE which is bash specific. For other
shells, this variable is empty, leading to an error message and empty
SDK_PATH.
Zsh Uses $0. Unfortunately POSIX is not specifying how exactly $0
should behave when in sourced (or using special dot utility). So other
shell support have to be implemented in different manner.
Signed-off-by: Krzysztof Kanas <kkanas@fastmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Set includedir to $(STAGING_DIR)/usr/share/gir-1.0 instead of . in
Makefile.introspection or g-ir-compiler won't find .gir files resulting
in a build failure for autotools-based based programs such as gconf
since bump of gobject-introspection to version 1.68.0 in commit
abc110e362:
Could not find GIR file 'GObject-2.0.gir'; check XDG_DATA_DIRS or use --includedir
error parsing file GConf-2.0.gir: Failed to parse included gir GObject-2.0
Fixes:
- http://autobuild.buildroot.org/results/8180d893cbd27512915a7f8a3adb232b93a98ceb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Long ago, before SMCRoute had yet become a proper daemon and standalone
control tool, it was both. After the metamorphosis commands and options
had changed, a compat script was added to provide a smooth transition.
The compat script is still shipped in the tarball, and installed, but
only Debian still relies on it, so we prune it here to keep confusion
to a minimum, hopefully.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Same start order as mrouted, start after networking is up.
Custom command line options, like startup delay, or disable multicast
routing by default, can be added to the optional /etc/default/smcroute
env. file.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Upstream has changed to tar.gz
- Drop _SOURCE, fixes check-package warning
- setpgrp not used anymore, no need to override configure cache
- Makefile no longer uses CC?=, drop comment
- Enable MRDISC build option, must be activated per phyint in
smcroute.conf, so safe to enable as a default build option
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Also correct the comment about installing the minified js file, which
was changed with the update to 3.0.5 in commit 42bf38dca.
Signed-off-by: Thomas Claveirole <thomas.claveirole@green-communications.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Install progress/usb services for swupdate based on meta-swupdate
configs.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since the website depends on the webserver being enabled we should
add a config option for it and make the website depend on that.
We should also ensure that the mongoose(webserver) config is present.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This needs to be set properly so that services work correctly.
Enable disable automatically based on BR2_PACKAGE_SYSTEMD state.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This ensures all tools/libraries will be properly installed.
Update SWUPDATE_BUILD_CMDS param ordering for consistency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The swupdate services do not depend on
BR2_PACKAGE_SWUPDATE_INSTALL_WEBSITE, so install them unconditionally.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In buildroot, stripping for the target is configured and implemented
with the global `BR2_STRIP_strip` option that drive the stripping in
the target-finalize step.
So, we explicitly disable stripping at build time for swupdate.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure on uclibc-ng raised since bump to
version 6.0.0 in commit 6b86c9335f:
../block/export/fuse.c: In function 'fuse_lseek':
../block/export/fuse.c:641:19: error: 'SEEK_HOLE' undeclared (first use in this function)
641 | if (whence != SEEK_HOLE && whence != SEEK_DATA) {
| ^~~~~~~~~
../block/export/fuse.c:641:19: note: each undeclared identifier is reported only once for each function it appears in
../block/export/fuse.c:641:42: error: 'SEEK_DATA' undeclared (first use in this function); did you mean 'SEEK_SET'?
641 | if (whence != SEEK_HOLE && whence != SEEK_DATA) {
| ^~~~~~~~~
| SEEK_SET
Fixes:
- http://autobuild.buildroot.org/results/33c90ebf04997f4d3557cfa66abc9cf9a3076137
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch adds runtime testing of the OCI archive created by the
sloci scripting. It launches a containerd instance, imports, and
runs the OCI container.
The existing QEMU AARCH64 kernel config was extended to enable common
options used by a container runtime (cgroup and overlayfs).
Signed-off-by: Matthew Weber <matthew.weber@collins.com>
[Arnout: adapt file name which is arm64 now; add to DEVELOPERS]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add support to generate OCI (Open Container Initiative) images.
An OCI image consists of a manifest, an image index (optional), a set of
filesystem layers, and a configuration. The complete specification is
available in the link below:
https://github.com/opencontainers/image-spec/blob/master/spec.md
The image is generated with the host tool sloci-image, and config
options can be used to configure image parameters.
By default, the image is generated in a directory called rootfs-oci:
$ cd output/images
$ ls rootfs-oci/
blobs index.json oci-layout
Optionally, the image can be packed into a tar archive.
The image can be pushed to a registry using containers tools like
skopeo:
$ skopeo copy --dest-creds <user>:<pass> oci:rootfs-oci:<tag> \
docker://<user>/<image>[:tag]
And then we can pull/run the container image with tools like docker:
$ docker run -it <user>/<image>[:tag]
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Matthew Weber <matthew.weber@collins.com>
[Arnout:
- mention in help text that options are space separated;
- use GO_GOARCH and GO_GOARM for architecture;
- quote all arguments;
- don't cd to BINARIES_DIR;
- remove ROOTFS_OCI_IMAGE_NAME variable;
- remove wildcard from rm.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
sloci-image is a simple CLI tool for packing rootfs into a single-layer
OCI image.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Matthew Weber <matthew.weber@collins.com>
[Arnout: correctly set PREFIX, add Matt to DEVELOPERS, add additional
patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since commit
d39d8f7cee:
In file included from /home/buildroot/autobuild/instance-3/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/include/boost/math/common_factor.hpp:14,
from /home/buildroot/autobuild/instance-3/output-1/build/gnuradio-3.8.2.0/gr-digital/lib/symbol_sync_cc_impl.cc:30:
/home/buildroot/autobuild/instance-3/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/include/boost/math/common_factor_ct.hpp:17:68: error: _Pragma takes a parenthesized string literal
17 | BOOST_MATH_HEADER_DEPRECATED("<boost/integer/common_factor_ct.hpp>");
|
Fixes:
- http://autobuild.buildroot.org/results/7b4/7b46f51588144bca1d323230c378ce7f6ee999a8/build-end.log
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure with glibc >= 2.34:
In file included from /tmp/instance-0/output-1/host/arc-buildroot-linux-gnu/sysroot/usr/include/bits/local_lim.h:81,
from /tmp/instance-0/output-1/host/arc-buildroot-linux-gnu/sysroot/usr/include/bits/posix1_lim.h:161,
from /tmp/instance-0/output-1/host/arc-buildroot-linux-gnu/sysroot/usr/include/dirent.h:233,
from automount.c:22:
automount.c:87:37: error: initializer element is not constant
87 | size_t detached_thread_stack_size = PTHREAD_STACK_MIN * 144;
| ^~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/0c8ab8968b2adf6a5f8eeab00ce388968fa1c1d5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update SITE to be synced with bayer2rgb-neon.
Use git as METHOD because no tarball is available for this version.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
sox also provides one or more libraries with headers, so also install
sox to staging.
Signed-off-by: Adrian Amaglio <nainformatique@gresille.org>
[Giulio: reword commit log]
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr:
- further refine commit log
- move assignment in a more sensible location
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following security issues:
- CVE-2021-40346: An integer overflow exists in HAProxy 2.0 through 2.5 in
the htx_add_header() can be exploited to perform an HTTP request smuggling
attack, allowing an attacker to bypass all configured http-request HAProxy
ACLs and possibly other ACLs.
For more details, see the advisory:
https://www.mail-archive.com/haproxy@formilux.org/msg41114.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Version 1.46.3 had a regression, which meant the file that would store
the filesystem image had to pre-exist, or mkfs.ext2 would fail to
generate the filesystem:
mkfs.ext4: No such file or directory while trying to determine
filesystem size
The regression was fixed upstream, and is now part of the 1.46.4
release, so bump to that release.
Fixes: #14196
Additionally, as noticed by Romain, the defaults settings for generating
"small" filesystems have changed: the inode size has been increased fom
128 to 256 bytes in 1.46.4 [0]. This causes the number of inodes to
diverge slightly from the requested number; instead of 8 more inodes,
there are now 8 fewer than requested.
Adapt our test accordingly.
[0] https://github.com/tytso/e2fsprogs/commit/a23b50cdb55cb826b8745cbc37429c93f7b60c66
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Reported-by: Kevin Tomary <kevin.tomary@hotmail.com>
Reported-by: Leon de Rooij <leon@exquisip.nl>
Reported-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The fix for CVE-2021-33196 can be bypassed by crafted inputs. As a result, the
NewReader and OpenReader functions in archive/zip can still cause a panic or an
unrecoverable fatal error when reading an archive that claims to contain a large
number of files, regardless of its actual size.
This is CVE-2021-39293.
https://golang.org/doc/devel/release.html#go1.16.minor
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Explicitly indicate the file encoding to UTF-8 for the DEVELOPERS
document. This prevents Unicode decoding errors when printing E-Mail
entries with Unicode characters on systems using an alternative default
encoding (e.g. 'CP1252').
This corrects the following observed error:
$ ./utils/get-developers outgoing/*
Traceback (most recent call last):
File "utils\get-developers", line 105, in <module>
__main__()
File "utils\get-developers", line 47, in __main__
devs = getdeveloperlib.parse_developers()
File "...\buildroot\utils\getdeveloperlib.py", line 239, in parse_developers
for line in f:
File "...\Python<ver>\lib\encodings\cp1252.py", line 23, in decode
return codecs.charmap_decode(input,self.errors,decoding_table)[0]
UnicodeDecodeError: 'charmap' codec can't decode byte 0x81 in position 6659: character maps to <undefined>
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump to version 2.9.3:
This is a small bugfix release focusing on exfat and dosfstools upstream
changes, along with a couple of test fixes.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When BR2_PACKAGE_IMX_GPU_VIV_OUTPUT_FB is selected, the native windowing
will be set to vivante frame buffer.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changes since v2019.08.23:
- Some X11 improvements (fullscreen support)
- New EGL driver debug messages
- Wayland improvements (xdg_shell, fullscreen support)
- KMS/DRM/GBM improvements (use drmGetDevices2())
- Use eglGetPlatformDisplay() if available
- New "nullws" native windowing system
- License hash changed due to copyright date update
Fixes:
http://autobuild.buildroot.net/results/a950e90d5f8405534566df5c7a8875c293cf8845
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failures with gcc 11:
/home/buildroot/autobuild/instance-3/output-1/host/lib/gcc/arm-buildroot-linux-gnueabihf/11.1.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: /home/buildroot/autobuild/instance-3/output-1/build/xvisor-0.3.0/build/drivers/drivers.o: in function `psmouse_extensions':
/home/buildroot/autobuild/instance-3/output-1/build/xvisor-0.3.0/drivers/input/mouse/psmouse-base.c:783: undefined reference to `lifebook_detect'
/home/buildroot/autobuild/instance-3/output-1/host/lib/gcc/arm-buildroot-linux-gnueabihf/11.1.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: /home/buildroot/autobuild/instance-3/output-1/build/xvisor-0.3.0/drivers/input/mouse/psmouse-base.c:783: undefined reference to `alps_detect'
/home/buildroot/autobuild/instance-3/output-1/host/lib/gcc/arm-buildroot-linux-gnueabihf/11.1.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: /home/buildroot/autobuild/instance-3/output-1/build/xvisor-0.3.0/drivers/input/mouse/psmouse-base.c:783: undefined reference to `ps2pp_init'
/home/buildroot/autobuild/instance-3/output-1/host/lib/gcc/arm-buildroot-linux-gnueabihf/11.1.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: /home/buildroot/autobuild/instance-3/output-1/build/xvisor-0.3.0/drivers/input/mouse/psmouse-base.c:783: undefined reference to `trackpoint_detect'
/home/buildroot/autobuild/instance-3/output-1/host/lib/gcc/arm-buildroot-linux-gnueabihf/11.1.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: /home/buildroot/autobuild/instance-3/output-1/build/xvisor-0.3.0/drivers/input/mouse/psmouse-base.c:783: undefined reference to `fsp_detect'
Fixes:
- http://autobuild.buildroot.org/results/69062b9c80567d135edd48890165e69881cf7295
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following uclibc build failure raised since at least bump to
version 0.11.0 in commit 0bc9c89612:
In file included from ../include/wlr/types/wlr_data_device.h:13,
from ../types/data_device/wlr_drag.c:7:
../include/wlr/types/wlr_seat.h:221:18: error: field 'last_event' has incomplete type
221 | struct timespec last_event;
| ^~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/3501ceb4290638b2f6d70aaa4d8ce74feec3a525
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Fix the following build failure on riscv32:
In file included from thread/qmutex_linux.cpp:45,
from thread/qmutex.cpp:804:
thread/qfutex_p.h: In function 'int QtLinuxFutex::_q_futex(int*, int, int, quintptr, int*, int)':
thread/qfutex_p.h:116:30: error: '__NR_futex' was not declared in this scope; did you mean '_q_futex'?
116 | int result = syscall(__NR_futex, addr, op | FUTEX_PRIVATE_FLAG, val, val2, addr2, val3);
| ^~~~~~~~~~
| _q_futex
Fixes:
- http://autobuild.buildroot.org/results/ffedfc000029072d5d724e98ab4551fe973658ce
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Fix the following build failure raised since bump of libglib2 to version
2.68.1 in commit c72524fb1b:
../gstreamer/gstreamermm/register.h: In function 'GType Gst::register_mm_type(const gchar*)':
/home/buildroot/autobuild/run/instance-2/output-1/host/bin/../arm-buildroot-linux-gnueabihf/sysroot/usr/include/glib-2.0/glib/gatomic.h:117:19: error: argument 2 of '__atomic_load' must not be a pointer to a 'volatile' type
117 | __atomic_load (gapg_temp_atomic, &gapg_temp_newval, __ATOMIC_SEQ_CST); \
| ~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/1c75cdcc183642fd4c15d56825848b83f2ad11a5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
The configure script fails to detect libpcap in static build because it
does not take into account the libnl dependency on link. As a result the
configure script silently disables mausezahn build even when
BR2_PACKAGE_NETSNIFF_NG_MAUSEZAHN is enabled. Add upstream patch to use
pkg-config for libpcap link flags.
Cc: Joris Lijssens <joris.lijssens@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- bpo-42278: Replaced usage of tempfile.mktemp() with TemporaryDirectory to
avoid a potential race condition.
- bpo-41180: Add auditing events to the marshal module, and stop raising
code.__init__ events for every unmarshalled code object. Directly
instantiated code objects will continue to raise an event, and audit event
handlers should inspect or collect the raw marshal data. This reduces a
significant performance overhead when loading from .pyc files.
- bpo-44394: Update the vendored copy of libexpat to 2.4.1 (from 2.2.8) to
get the fix for the CVE-2013-0340 “Billion Laughs” vulnerability. This
copy is most used on Windows and macOS.
- bpo-43124: Made the internal putcmd function in smtplib sanitize input for
presence of \r and \n characters to avoid (unlikely) command injection.
https://www.python.org/downloads/release/python-397/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Though several cross-compilation patches exist in buildroot's nginx
package dir they do not seem to address endianness.
The test program generated by the configure script compiles but fails
to run (as it is built for another architecture) but the script does
not distinguish between the failure to run the program and an
indication of certain endianness. As such the fallback of big-endian
is used. This setting then causes http2 headers (anything not in the
static dictionary) to come out as undecipherable trash on 64bit
targets (see ngx_http_v2_huff_encode_buf()).
This commit includes a patch to the configure script to allow a
`--force-endianness=big|little` flag as well as setting that flag in
buildroot's package makefile.
Signed-off-by: Nevo Hed <nhed+buildroot@starry.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Find libxcryt through pkg-config to avoid the following build failure:
/home/buildroot/autobuild/run/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/riscv64-buildroot-linux-musl/10.2.0/../../../../riscv64-buildroot-linux-musl/bin/ld: .libs/passverify.o: in function `.L30':
passverify.c:(.text+0x368): undefined reference to `crypt_checksalt'
Fixes:
- http://autobuild.buildroot.org/results/20b14e222b35c2d1269960075832b784ba81aa1a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- NodeJS passes NULL for addr and 0 for addrlen to
ares_parse_ptr_reply() on systems where malloc(0) returns NULL. This
would cause a crash.
- If ares_getaddrinfo() was terminated by an ares_destroy(), it would
cause a crash
- Crash in sortaddrinfo() if the list size equals 0 due to an unexpected
DNS response
- Expand number of escaped characters in DNS replies as per RFC1035 5.1
to prevent spoofing follow-up
- Perform validation on hostnames to prevent possible XSS due to
applications not performing valiation themselves
https://c-ares.haxx.se/changelog.html#1_17_2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some 3rd party vendor toolchains have multiple files which match
these glob patterns. In this case, the shell script failed.
Switching to use find and xargs solves the issue.
Signed-off-by: Jonah Petri <jonah@petri.us>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
rwmem is small tool to read & write device registers. Some of the
features include:
- support mmaped and i2c devices
- addressing with 8/16/32/64 bit addresses
- accessing 8/16/32/64 bit memory locations
- little and big endian addressess and accesses
- bitfields
- address ranges
- register description database
Python bindings are disabled for now.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The Qt OPC UA module implements a Qt API to interact with OPC UA on
top of a 3rd party OPC UA stack.
The default is open62541, which is bundled by qt5opcua in version 1.0,
so we dont need to provide/depend on br's own open62541 package.
Another dependency is mbedtls, but it's optional.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Vue Router is the official router for Vue.js.
Signed-off-by: Thomas Claveirole <thomas.claveirole@green-communications.fr>
[Arnout: use comment instead of submenu]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This tests build a bogus package that installs a binary built for the
host architecture into $(TARGET_DIR), which should cause a build
failure, at least as long as the host architecture isn't ARM.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
[yann.morin.1998@free.fr: drop uneeded subprocess import to fix flake8]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some tests will need to grep through the build log to verify that some
features are working are expected. In order to allow them to open the
build log, we provide a new function called log_file_path(), which
returns the path to the log file if available.
We also use this function in open_log_file().
Note that open_log_file() cannot be used directly to grep through the
log file at the end of a build: because it opens in "a+" mode, it
greps starting from the end of the file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since commit 39d334faa5 (package/pkg-qmake: add <pkg>_SYNC_QT_HEADERS
support), the qmake-package infra recognises said variable but the
manual has the wrong variable name, which is missing the "_QT" part.
We fix that by amending the manual to document the proper variable name.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
QT5_QT_CONF_FIXUP tweaks files for per-package directory build.
This is typically the kind of operation expected to be in
post-prepare hook.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When using top level parallel build, independent qt5 packages may be
built in parallel. Because of their staging dirs being hardlinked, they
all use the same qt.conf file to manipulate during configure, while
another qt5 package might already use it. This leads to weird build failures
because the folders qmake is using are diverted in erratic ways.
Fix this by actually recreating a non-shared qt.conf file for every package.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This release includes the following changes:
- New features
- New 'sessionResume' service-level option to allow or disallow session resumption
- Added support for the new SSL_set_options() values.
- Download fresh ca-certs.pem for each new release.
- Bugfixes
- Fixed 'redirect' with 'protocol'. This combination is not supported by 'smtp', 'pop3' and 'imap' protocols.
- Enforced minimum WIN32 log window size.
- Fixed support for password-protected private keys with OpenSSL 3.0 (thx to Dmitry Belyavskiy).
- Added missing TLS options supported in OpenSSL 1.1.1k.
Signed-off-by: Pierre-Jean Texier <texier.pj2@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This release introduces meson build system support.
As meson files are only available in git, switch the location to
https://gitlab.freedesktop.org.
Add support for bash-completion.
Add an upstream patch fixing the compilation without gobject-intorspection.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Use BR2_PACKAGE_MESA3D_GBM instead of BR2_PACKAGE_MESA3D_OPENGL_EGL as
GBM can also be provided by a DRI driver
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The gitlab-ci support in test-pkg allows to parallelize the test-pkg
work into several gitlab jobs. It's much faster than local serialized
testing.
To trigger this, a developer will have to add, in the latest commit of
their branch, a token on its own line, followed by a configuration
fragment, e.g.:
test-pkg config:
SOME_OPTION=y
# OTHER_OPTION is not set
SOME_VARIABLE="some value"
This configuration fragment is used as input to test-pkg.
To be able to generate one job per test to run, we need the list of
tests in the parent pipeline, and the individual .config files (one per
test) in the child pipeline. We use the newly-introduced --prepare-only
mode to test-pkg, and collect all the generated .config files as
artefacts; those are inherited in the child pipeline via the
"needs::pipeline" and "needs::job" directives. This is a bit tricky,
and is best described by the Gitlab-CI documentation [0].
We also list those .config files to generate the actual list of jobs to
run in the child pipeline.
Notes:
- if the user provides an empty fragment, this is considered an error:
indeed, without a fragment (and the package name), there is no way
to know what to test;
- if that fragment yields an empty list of tests, then there is
nothing to test either, so that is also considered an error.
[0] https://docs.gitlab.com/ee/ci/yaml/README.html#artifact-downloads-to-child-pipelines
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr:
- split the change to test-pkg to its own patch
- generate the actual yml snippet in support/scripts/generate-gitlab-ci-yml,
listing the .config files created by test-pkg
- some code-style-candies...
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, running test-pkg is only done locally on the developers
machine.
In a follow up commit, we'll add the possibility to run test-pkg in a
gitlab-ci pipeline and, to speed things up, with one job per buildable
configuration.
As such, we will need to make sure that test-pkg only prepares the
configurations, and that it does not build them.
Add such a mode, with a new option, --prepare-only
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update STM32F469-disco configuration files to operate with new kernel.
Result of make tinyconfig was taken as a starting point to fit kernel
into flash memory.
Current setup kernel + rootfs fits in 1.6MB on-chip flash memory
Fixes:
- Move kernel to new flash bank due to growth of dtb size
- Fix kernel start address in bootloader
- Remove outdated path which doesn't affect normal operation mode
For better binary size optimization gcc LTO is turned on.
Signed-off-by: Yauheni Saldatsenka <eugentoo@gmail.com>
[Arnout:
- squash 3 patches into 1;
- remove unused dts file;
- move linux/linux.config to linux-xip.config;
- add a sentence to readme to say SD card is not needed.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixing _sysconfigdata*.{py,pyc} was previously done by python package
infrastructure. Some packages use python stuff without using python
package infrastructure.
These packages perform overwrites and need the specific python fixup
to fix them.
In order to be sure to fix all of these packages, the python fixup
is moved to the generic package infrastructure and applied to all
packages.
This follows the same principle as for the .la libtool files fixup.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
For per-package directories, we fixup the _sysconfigdata*.py files, so
that they get proper path pointing to the current package's direcotry
structure.
However, the corresponding, pre-compiled blobs _sysconfigdata*.pyc were
left around, and thus are inconsistent with their source. They might
also be regenerated when a package would install a python module; this
regeneration would trigger the soon-to-be-introduced overwrite
detection.
This commit simply removes _sysconfigdata*.pyc files; they will anyway
be regenerated by the PYTHON{,3}_CREATE_PYC_FILES target finalize hooks.
This is an efficient way to guarantee the consistency between the source
and precompiled versions, and to not trigger the overwrite detection.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
[yann.morin.1998@free.frs: reword the commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Find used by PKG_PYTHON_FIXUP_SYSCONFIGDATA can fail if directories
are not present. This failure is silently ignored because find is
on the LHS of a pipe.
This commit fixes the find failure. HOST_DIR is used as the starting
point and the search is filtered on the expected directories.
This commit also adds -print0 and the $(Q) verbosity flag as minor
changes.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
[yann.morin.1998@free.fr:
- split long line with the two -path options
- move "| xargs ..." onto its own line
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
With BR2_REPRODUCIBLE, our 'fakedate' wrapper script will end up in
host/bin/date. Currently, it iterates over all the 'date' found in PATH,
until it finds one that is not the script itself, in an attempt to avoid
infinite recursion by calling itself again and again.
This heuristic works OK in Buildroot, because host/bin/ is first in the
PATH, and so that means the first entry in the PATH is skipped.
However, this is going to fail as soon as our wrapper is not the first
in the PATH. Indeed, in that situation, the current heuristic will stop
on the first 'date' in the PATH, as it is not the script itself, and
since our script was executed, that probably means the first 'date' was
itself a wrapper that ended up calling us. So, calling it again will
eventually trickle to calling us again, and thus creating the loop our
heuristic was made to avoid.
This situation currently does not occur in Buildroot, because host/bin/
is first, *and* we have no package that provide their own 'date' wrapper
during their build steps.
But when we generate an SDK with BR2_REPRODUCIBLE, then our wrapper
script will be in sdk/bin/, and there is no longer any guarantee this
comes first in the PATH, thus opening the possibility that another
buildsystem based on our SDK, but which has its own 'date' wrapper, will
trigger this infinite recursion.
We fix that by iterating, in reverse order, over all the 'date' we can
find in PATH, and when we find ourselves, then we know the one we found
in the iteration just before is the one that we should call.
'which -a' is old enough that we can expect it to be always available;
it has been present at least since Debian Squeeze, released 2011.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix build of xen with 64 bites time_t:
/tmp/instance-0/output-1/build/xen-4.14.2/tools/qemu-xen/hw/input/virtio-input-host.c: In function 'virtio_input_host_handle_status':
/tmp/instance-0/output-1/build/xen-4.14.2/tools/qemu-xen/hw/input/virtio-input-host.c:198:28: error: 'struct input_event' has no member named 'time'
198 | if (gettimeofday(&evdev.time, NULL)) {
| ^
Fixes:
- http://autobuild.buildroot.org/results/136ce42f44bf48d3db4eda7b1548bf7ac1b97d51
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This version bump is needed to pass the ATF test with
hardening option enabled (-fstack-protector-strong)
With the version v2.2, ATF fail due to undefined references:
./build/juno/release/bl2u/arm_tzc400.o: In function `arm_tzc400_setup':
arm_tzc400.c:(.text.arm_tzc400_setup+0x10): undefined reference to `__stack_chk_guard'
arm_tzc400.c:(.text.arm_tzc400_setup+0x18): undefined reference to `__stack_chk_guard'
arm_tzc400.c:(.text.arm_tzc400_setup+0xb8): undefined reference to `__stack_chk_guard'
arm_tzc400.c:(.text.arm_tzc400_setup+0xcc): undefined reference to `__stack_chk_fail'
Since commit ccac9a5bbb, Buildroot no
longer forces ENABLE_STACK_PROTECTOR. However, we rely on the ATF build
system to handle it correctly, and this wasn't the case in v2.2.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/1524842591
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When BR2_REPRODUCIBLE is set and host-coreutils needs to be built, the
fakedate script installed to 'host/bin/date' will be overwritten by
host-coreutils.
Besides, we do not need our host-coreutils for 'date' at all; we really
rely on the host system to provide it.
Unconditionally disable installing the 'date' binary in host-coreutils.
Note that we explicitly request only ln and realpath to be installed,
but the coreutils buildsystem does not strictly obey to that, as was
already noticed in 885e6fdb8a (package/coreutils: introduce a host
variant), which added that comment above HOST_COREUTILS_CONF_OPTS:
# Explicitly install ln and realpath, which we *are* insterested in.
# A lot of other programs still get installed, however, but disabling
# them does not gain much at build time, and is a loooong list that is
# difficult to maintain...
So, we also update that comment to explain why we still anyway disable
installation of 'date'.
Signed-off-by: Conrad Ratschan <conrad.ratschan@collins.com>
[yann.morin.1998@free.fr:
- unconditionally disable installing date
- extend comment and commit log to explain why we need
--enable-no-install-program=date despite the existing
--enable-install-program=ln,realpath
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Sam Voss <sam.voss@collins.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr:
- introduce BUSYBOX_INSTALL_TELNET_SERVICE
- move _INSTALL_INIT_SYSTEMD alphabetically between openrc and sysv
- drop the comment about Type=simple (Arnout)
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since version 2.1.3 ubihealthd can be enabled without of ubifs-utils.
This also fixes usability of enabling BR2_PACKAGE_MTD_UBIHEALTHD.
BR2_PACKAGE_MTD_UBIFS_UTILS is a blind option. The only way to enable it
is to enable BR2_PACKAGE_MTD_MKFSUBIFS that selects it. ubihealthd
dependency on BR2_PACKAGE_MTD_UBIFS_UTILS makes enabling it unintuitive.
Cc: Markus Mayer <mmayer@broadcom.com>
Cc: Matt Weber <matthew.weber@collins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
resync the version with glibc package.
Dropped 2 patches (fixes backported from previous releases),
rebased 2 which are kept (only line numbers changed).
Suggested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
[Arnout: resolve conflicts]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
the nabble.com link is dead and lore has a good search.
So use lore for the search form.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure without /usr/bin/msgfmt raised since the
addition of ushare in commit 74097fd659:
make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/ushare-2.1/po'
/usr/bin/msgfmt -c --statistics -o fr.gmo fr.po
make[3]: /usr/bin/msgfmt: Command not found
To fix this build failure, set GMSGFMT to $(HOST_DIR)/bin/msgfmt and
don't build po files if NLS is disabled
Fixes:
- http://autobuild.buildroot.org/results/9f6b5b8f38386135bacd2d8f6e97c1fea77bbe69
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The beaglev kernel is based on the 5.13 branch, update
the expected linux-headers version to 5.13.
This has been wrong ever since the bump of the kernel version in commit
9a1bd7cc1c: the headers were bumped to
5.12 instead of 5.13.
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/1525740895
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Previously, alsa-plugins would not work if alsa-utils was installed
after it. This happened because:
1. alsa-plugins copies some files $(TARGET_DIR)/usr/share/alsa/alsa.conf.d
2. alsa-utils removes these files during installation ( rm -rf $(TARGET_DIR)/usr/share/alsa/;)
The `rm -rf` command was originally added as part of the fix for
https://bugs.buildroot.org/show_bug.cgi?id=1573 11 years ago.
The intention might have been to allow for unconfiguring some options
and then rebuilding alsa-utils. However, this is a scenario that does
not work anyway.
The simplest fix for the `alsa-plugins` compatibility issue appears to
be to remove the `rm -rf` command.
Signed-off-by: Gleb Mazovetskiy <glex.spb@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Maxime has not been contributing to Buildroot for several years, so it
doesn't make sense to keep him in the DEVELOPERS file and make us
think that those packages are being maintained and to Cc: him on
patches affecting those packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some 3rd party vendor toolchains have multiple files which match
these glob patterns. In this case, the shell script failed.
Switching to use find and xargs solves the issue.
Signed-off-by: Jonah Petri <jonah@petri.us>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add libxcrypt optional dependency and fix the following build failure
with libxcrypt and uclibc-ng raised since the addition of libxcrypt in
commit 464bbe26ff:
/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabihf/9.3.0/../../../../arm-buildroot-linux-uclibcgnueabihf/bin/ld: unix_chkpwd-passverify.o: in function `verify_pwd_hash':
passverify.c:(.text+0xab4): undefined reference to `crypt_checksalt'
Fixes:
- http://autobuild.buildroot.org/results/65d68b7c9c7de1c7cb0f941ff9982f93a49a56f8
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
resync the version with glibc package.
Remove upstream patches.
Rebase remaining patches for glibc 2.33.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The tests.package.test_docker_compose.TestDockerCompose is broken
since the python-idna version bump to 3.0 because python-requests needs
python-idna < 3.0.
# docker-compose up -d
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 583, in _build_master
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 900, in require
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 791, in resolve
pkg_resources.ContextualVersionConflict: (idna 3.2 (/usr/lib/python3.9/site-packages), Requirement.parse('idna<3,>=2.5'), {'requests'})
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/bin/docker-compose", line 6, in <module>
from pkg_resources import load_entry_point
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 3252, in <module>
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 3235, in _call_aside
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 3264, in _initialize_master_working_set
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 585, in _build_master
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 598, in _build_from_requirements
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 786, in resolve
pkg_resources.DistributionNotFound: The 'idna<3,>=2.5' distribution was not found and is required by requests
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/1522848327
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
gcc 10.x is now used by default but the kernel 4.19 used by
test_docker_compose doesn't build with it.
Bump the kernel to 4.19.204 release that contains a lot of
fixes for newer gcc.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In versions > 0.21, the CMake script doesn't auto-enable features
according to what it detects in the environment; options have to be
explicitely enabled. Update the libiio.mk script accordingly.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Upstream commit [1] introduced an invocation of objcopy to generat
loader.txt. However, objcopy, if not provided with an output file, will
overwrite the input file. This is usually harmless because it will be
identical, but the timestamp is updated. This may cause 'empty' to be
newer than 'loader.txt', which causes 'loader.txt' and its dependencies
to be rebuilt during 'make install'
We provide a different set of parameters during 'make install'. In
particular, we no longer pass in HOST_CONFIGURE_OPTS, so we no longer
set LDFLAGS. Thus, there is no -Wl,rpath option that is passed in, which
causes the resulting binaries to have an incorrect RPATH.
Fix this by adding /dev/null as the output file in the objcopy
invocation.
Patch was sent upstream, but there's no mailing list, just a single
person.
Fixes: http://autobuild.buildroot.net/results/600/600aff5b839b48db80751cace5fa9670b7a3d698
(hopefully)
[1] https://git.kernel.org/pub/scm/libs/libcap/libcap.git/commit/?id=efd293947f940180eedd8d0915b124f4aedccc08
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Upstream commit [1] introduced an invocation of objcopy to generat
loader.txt. However, objcopy, if not provided with an output file, will
overwrite the input file. This is usually harmless because it will be
identical, but the timestamp is updated. This may cause 'empty' to be
newer than 'loader.txt', which causes 'loader.txt' and its dependencies
to be rebuilt during 'make install'
We provide a different set of parameters during 'make install'. In
particular, we no longer pass in HOST_CONFIGURE_OPTS, so we no longer
set LDFLAGS. Thus, there is no -Wl,rpath option that is passed in, which
causes the resulting binaries to have an incorrect RPATH.
Fix this by adding /dev/null as the output file in the objcopy
invocation.
Patch was sent upstream, but there's no mailing list, just a single
person.
Fixes: http://autobuild.buildroot.net/results/600/600aff5b839b48db80751cace5fa9670b7a3d698
(hopefully)
[1] https://git.kernel.org/pub/scm/libs/libcap/libcap.git/commit/?id=efd293947f940180eedd8d0915b124f4aedccc08
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The python2 support has been removed since the python-idna bump to version 3.2 [1]
[1] 0c7e30b43a
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure on riscv32:
../src/util/futex.h: In function 'sys_futex':
../src/util/futex.h:39:19: error: 'SYS_futex' undeclared (first use in this function); did you mean 'sys_futex'?
39 | return syscall(SYS_futex, addr1, op, val1, timeout, addr2, val3);
| ^~~~~~~~~
| sys_futex
Fixes:
- http://autobuild.buildroot.org/results/692700a5f967760a0b8cd358b1712f1d5a7b681e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We generally prefer using make loops instead of shell loops. They
bring automatic error handling, as they abort the loop when there is
an error, without the need for "|| exit 1".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The IMX_GPU_VIV_FIXUP_PKGCONFIG fixup is defined conditionally
depending on the value of IMX_GPU_VIV_LIB_TARGET, which means that
obviously only one of the definitions is possible. Make this clear by
using a ifeq ... else ifeq ... else ifeq ... endif logic.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We manually install pkg-config files from
$(@D)/gpu-core/usr/lib/pkgconfig to the STAGING_DIR right after
copying the entire $(@D)/gpu-core/usr/* files to STAGING_DIR. This
makes the manual copying of pkg-config files pretty useless.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The fixup of the pkg-config files modifies files in the build
directory (@D) but is done in the staging installation step, which
doesn't make much sense, especially since the build step already has
some fixup logic. So we move the fixup logic of the pkg-config files
into the build step.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The current restorecond upstream init script is no good fit for the
user space generated by buildroot, so we provide our own one.
Signed-off-by: José Pekkarinen <jose.pekkarinen@unikie.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix added by commit c20d31baf4 is
incomplete as polkit.loc must also be added to
$(HOST_DIR)/share/gettext/its
Additionally, the destination path for "$(INSTALL) -D" must be a
fully-qualified filename, not just the destination directory.
Fixes:
- http://autobuild.buildroot.org/results/170e4802b7b4e8e7dafa95ade549e8fd05e43bfd
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: dest must be a filename, not a directory]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
GNU cpio through 2.13 allows attackers to execute arbitrary code via a
crafted pattern file, because of a dstring.c ds_fgetstr integer overflow
that triggers an out-of-bounds heap write. NOTE: it is unclear whether
there are common cases where the pattern file, associated with the -E
option, is untrusted data.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop libmcrypt which is a cryptographic package that is not maintained
anymore. Here is an extract of https://en.wikipedia.org/wiki/Mcrypt:
"The last update to libmcrypt was in 2007, despite years of unmerged
patches. These facts have led security experts to declare mcrypt
abandonware and discourage its use in new development.".
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop mcrypt which is a cryptographic package that is not maintained
anymore. Here is an extract of https://en.wikipedia.org/wiki/Mcrypt:
"The last update to libmcrypt was in 2007, despite years of unmerged
patches. These facts have led security experts to declare mcrypt
abandonware and discourage its use in new development."
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
d1fc0690ad (package/libvirt: fix dependencies on kernel headers)
forgot to update the conditions for the comment after the last-minute
changes by Yann.
Fix that.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In ccfc90e101 (package/libvirt: new package), last-minute changes
missed the depenecny on kernel headers; headers >= 3.12 are required for
all architectures, but AArch64, which requires 4.11 for HWCAP_CPUID:
../src/cpu/cpu_arm.c: In function 'virCPUarmCpuDataFromRegs':
../src/cpu/cpu_arm.c:562:20: error: 'HWCAP_CPUID' undeclared (first use in this function); did you mean 'HWCAP_PMULL'?
if (!(hwcaps & HWCAP_CPUID)) {
^~~~~~~~~~~
HWCAP_PMULL
Fixes:
- http://autobuild.buildroot.org/results/85bf7b4dad73a748bf439e63874eb64d9a53088f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
- move AArch64 4.11 req. from _ARCH_SUPPORTS to BR2_PACKAGE_LIBVIRT
- add missing dependency on headers 3.12 for the rest
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Similarly to Uboot, this patch adds the ability to copy in and build
out-of-source device tree sources during an ATF build.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Strip xbr contracts which are used only for the xbr feature which is
entirely unsupported by buildroot.
Add patch to fix some xbr assets getting accidentially included.
Enable the optimized nvx cffi extension module when available.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
MPV is not only an application, but also a library, which should be avaliable in staging.
Signed-off-by: Zeno Endemann <zeno.endemann@mailbox.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This folder includes the fixfiles script that is used
by selinux autorelabel feature. Currently it installs
it under /usr/sbin.
Signed-off-by: José Pekkarinen <jose.pekkarinen@unikie.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The heirloom-mailx package exhibits gcc bug 101916 when built for the
SH4 architecture with optimization enabled, which causes a build failure.
As done for other packages in Buildroot work around this gcc bug by
setting optimization to -O0 if BR2_TOOLCHAIN_HAS_GCC_BUG_101916=y.
Also introduce HEIRLOOM_MAILX_CFLAGS as done for other packages and move
the already present -fPIC CFLAG to it.
Fixes:
http://autobuild.buildroot.net/results/911/911f5c024834741754102ff1bbb05c4a64c54a0b/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Build of gdb on riscv without host-gdb is broken since commit
4ecd247ead because BR2_GDB_VERSION_10 is
never defined if BR2_PACKAGE_HOST_GDB is not selected resulting in the
following build failure:
/bin/bash: line 0: cd: /tmp/instance-0/output-1/build/gdb-10.1/gdb/gdbserver: No such file or directory
So add a BR2_PACKAGE_GDB_TOPLEVEL hidden option as suggested by Thomas
Petazzoni.
Fixes:
- http://autobuild.buildroot.org/results/ce47d616ee79d5f735779570ebc3b4a9c0f64c6a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This reverts commit 46b8fb7500 indeed if
libressl is selected as the openssl provider, the BR2_PACKAGE_OPENSSL
conditition will always be used and the BR2_PACKAGE_LIBRESSL condition
will never be triggered. Moreover, libressl provides a pkg-config file.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues:
- CVE-2021-39240: An issue was discovered in HAProxy 2.2 before 2.2.16, 2.3
before 2.3.13, and 2.4 before 2.4.3. It does not ensure that the scheme
and path portions of a URI have the expected characters. For example, the
authority field (as observed on a target HTTP/2 server) might differ from
what the routing rules were intended to achieve.
- CVE-2021-39241: An issue was discovered in HAProxy 2.0 before 2.0.24, 2.2
before 2.2.16, 2.3 before 2.3.13, and 2.4 before 2.4.3. An HTTP method
name may contain a space followed by the name of a protected resource. It
is possible that a server would interpret this as a request for that
protected resource, such as in the "GET /admin? HTTP/1.1 /static/images
HTTP/1.1" example.
- CVE-2021-39242: An issue was discovered in HAProxy 2.2 before 2.2.16, 2.3
before 2.3.13, and 2.4 before 2.4.3. It can lead to a situation with an
attacker-controlled HTTP Host header, because a mismatch between Host and
authority is mishandled.
For more details, see the advisory:
https://www.mail-archive.com/haproxy@formilux.org/msg41041.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package has had build failures for a very long time, and these
issues have not been fixed, and it is now the number 1 build failure
reason in our autobuilders. It is time to acknowledge that the package
needs to be removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure raised since the addition of the package
in commit ccfc90e101:
/tmp/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/i686-buildroot-linux-uclibc/9.3.0/../../../../i686-buildroot-linux-uclibc/bin/ld: src/util/libvirt_util.a(viralloc.c.o): in function `virInsertElementsN':
viralloc.c:(.text+0x167): undefined reference to `libintl_dgettext'
Fixes:
- http://autobuild.buildroot.net/results/2349c55a4a42f08ca52700c60cda3065b0c4bd88
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to AT91Bootstrap 4.0.0 version.
This package is now released under MIT license, and a license file was
added.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since I've dealt and deal with toolchain bugs and their work-around
very often add myself to toolchain topic(toolchain/) as well as
package/binutils and package/gcc.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The language detection is falling back to the host system
Fortran compiler. An example of this is in RHEL7.9
(gcc4.8.5 20150623 (Red Hat 4.8.5-44)).
This patch bypasses detection and points to the location
where the compiler would be installed (if present). In the
cases where it doesn't exist, the detection falls through
and leaves Fortran disabled.
Fixes:
http://autobuild.buildroot.net/results/8354da225d1e5e337aa7ea62a7e6524fb5f1135f/
Signed-off-by: Matthew Weber <matthew.weber@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Also adds patch to make the jemalloc feature optional on musl, due to
toolchains not being supported by upstream project.
Signed-off-by: Sam Voss <sam.voss@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This includes the following changes:
7.15
- Kernel part changes
- netfilter: ipset: Fix maximal range check in hash_ipportnet4_uadt() (Nathan Chancellor)
7.14
- Userspace changes
- Add missing function to libipset.map and bump library version (reported by Jan Engelhardt)
- Kernel part changes
- 64bit division isn't allowed on 32bit, replace it with shift
7.13
- Userspace changes
- When parsing protocols by number, do not check it in /etc/protocols.
- Add missing hunk to patch "Allow specifying protocols by number"
- Kernel part changes
- Limit the maximal range of consecutive elements to add/delete fix
7.12
- Userspace changes
- Allow specifying protocols by number (Haw Loeung)
- Fix example in ipset.8 manpage discovered by Pablo Neira Ayuso.
- tests: add tests ipset to nftables (Pablo Neira Ayuso)
- add ipset to nftables translation infrastructure (Pablo Neira Ayuso)
- lib: Detach restore routine from parser (Pablo Neira Ayuso)
- lib: split parser from command execution (Pablo Neira Ayuso)
- Fix patch "Parse port before trying by service name"
- Kernel part changes
- Limit the maximal range of consecutive elements to add/delete (reported by Brad Spengler)
- Backport "netfilter: use nfnetlink_unicast()"
- Backport "netfilter: nfnetlink: consolidate callback type"
- Backport "netfilter: nfnetlink: add struct nfnl_info and pass it to callbacks"
- Backport "netfilter: add helper function to set up the nfnetlink header and use it"
Signed-off-by: Pierre-Jean Texier <texier.pj2@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The latest Go release, version 1.17, arrives six months after Go 1.16.
Most of its changes are in the implementation of the toolchain,
runtime, and libraries.
https://golang.org/doc/go1.17
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop autoreconf; tarball now ships the configure script.
Rename license files and update hashes. Added SPDX markers. No license
change.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For MIPS64 architecture variants supported by Rust, we need to exclude
MIPS64R6, but due to a copy/paste mistake in commit
d69d40c029 ("package/rustc: add support
for Tier 1 and Tier 2 platform"), we used BR2_MIPS_CPU_MIPS32R6 for
both MIPS 32-bit and MIPS 64-bit configurations, while
BR2_MIPS_CPU_MIPS64R6 should be used on MIPS 64-bit.
Fixes:
http://autobuild.buildroot.net/8bab232eb98b164df300581ae019254bde7c8ca3/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When building protobuf for or1k -mcmodel=large is needed to link, so let's
add that gcc option in case we're building for or1k.
Upstream gcc doesn't have the -mcmodel=large option for or1k, but all
released Buildroot gcc versions have the patch to add it, so that's
fine.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When building libgeos for or1k -mcmodel=large is needed to link, so let's
add that gcc option in case we're building for or1k.
Upstream gcc doesn't have the -mcmodel=large option for or1k, but all
released Buildroot gcc versions have the patch to add it, so that's
fine.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
At the moment of gcc 11.1.0 release the OpenRisc patches for -mcmodel=large
were still pending. They have been upstreamed yesterday as pointed in gcc
bugzilla[1]. So they will be part of gcc 11.3.0 or maybe before on 11.2.
2. Anyway at the moment if we try to build packages libgeos and protobuf
with OpenRisc gcc 11.1.0 it fails due to missing -mcmodel=large. So let's
add OpenRisc patches for it as done for all the previous versions.
Fixes:
still not appeared on autobuilers
[1]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99783
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add TARGET_NLS_DEPENDENCIES and host-gettext dependency to avoid the
following build failure in a per-package-directorie build with
host-cairo raised because fontconfig installs its ITS files in the wrong
directory (i.e. outside of gettext-tiny symlink):
mkdir -p /tmp/instance-0/output-1/per-package/host-cairo/host
rsync -a --link-dest=/tmp/instance-0/output-1/per-package/host-fontconfig/host/ /tmp/instance-0/output-1/per-package/host-fontconfig/host/ /tmp/instance-0/output-1/per-package/host-cairo/host
rsync -a --link-dest=/tmp/instance-0/output-1/per-package/host-freetype/host/ /tmp/instance-0/output-1/per-package/host-freetype/host/ /tmp/instance-0/output-1/per-package/host-cairo/host
rsync -a --link-dest=/tmp/instance-0/output-1/per-package/host-libglib2/host/ /tmp/instance-0/output-1/per-package/host-libglib2/host/ /tmp/instance-0/output-1/per-package/host-cairo/host
cannot delete non-empty directory: share/gettext
could not make way for new symlink: share/gettext
This only happens with per-package directories because then the rsync is
done. Otherwise the fontconfig installation will simply follow the
symlink.
The error of course exists for target as well, but doesn't occur in
autobuilders since it already fails for host.
Fixes:
- http://autobuild.buildroot.org/results/00e29958cecfffa4e994ab549637117dd8f55c30
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
commit f79a420825 (package/busybox/udhcpc.script: support RFC3442
static routes) used 'set --' clobbering the positional arguments, causing
the action argument to not be correctly forwarded to hook scripts for the
renew / bound cases if static routes are provided by the server.
As a workaround, save the action argument at the beginning of the script and
use that when calling hook scripts.
Reported-by: 王琦 <wangwangqi2011@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 5f432df7e2 ("boot/arm-trusted-firmware: change
ENABLE_STACK_PROTECTOR value when disabled") set
ENABLE_STACK_PROTECTOR=0 when disabled. But since we pass this value as
MAKE_OPT, the internal ATF logic that sets ENABLE_STACK_PROTECTOR again
based on its initial value breaks. This leads to build failure:
make[1]: *** [/builds/buildroot.org/buildroot/output/build/arm-trusted-firmware-v2.4/build/a80x0_mcbin/release/libc/assert.o] Error 1
aarch64-buildroot-linux-uclibc-gcc.br_real: error: unrecognized command-line option ‘-fstack-protector-0’; did you mean ‘-fstack-protector’?
Move ENABLE_STACK_PROTECTOR to make environment instead to allow make to
change its value.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1497663294
Cc: Dick Olsson <hi@senzilla.io>
Cc: Sergey Matyukevich <geomatsi@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The release contains a bugfix to fix the make install of the python
module after build changes introduced in this release RC1.
This release contains a number of bug fixes. There is a crash fix for
broken internal structures in stream reuse, that is used when many TCP
or TLS upstream connections are made. Also a number of features are added.
https://github.com/NLnetLabs/unbound/releases/tag/release-1.13.2
Signed-off-by: Kyle Harding <kyle@balena.io>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go1.16.7 (released 2021-08-05) includes a security fix to the
net/http/httputil package, as well as bug fixes to the compiler, the
linker, the runtime, the go command, and the net/http package.
https://golang.org/doc/devel/release#go1.16
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
read_header_tga in gd_tga.c in the GD Graphics Library (aka LibGD)
through 2.3.2 allows remote attackers to cause a denial of service
(out-of-bounds read) via a crafted TGA file.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
textview_uri_security_check in textview.c in Claws Mail before 3.18.0,
and Sylpheed through 3.7.0, does not have sufficient link checks before
accepting a click.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure without x_forwarded_for raised since
bump to version 1.3 in commit 3335c8d868:
/home/buildroot/autobuild/instance-3/output-1/build/nginx-naxsi-1.3/naxsi_src/naxsi_runtime.c: In function 'ngx_http_naxsi_data_parse':
/home/buildroot/autobuild/instance-3/output-1/build/nginx-naxsi-1.3/naxsi_src/naxsi_runtime.c:2846:20: error: 'ngx_http_headers_in_t' has no member named 'x_forwarded_for'
if (r->headers_in.x_forwarded_for.nelts >= 1) {
^
Fixes:
- http://autobuild.buildroot.org/results/cdbc1536f6b5de3d4c836efa2f0dcaf0cdbb1462
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with gcc 11:
In file included from /tmp/instance-0/output-1/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/glib-2.0/glib/gthread.h:32,
from /tmp/instance-0/output-1/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/glib-2.0/glib/gasyncqueue.h:32,
from /tmp/instance-0/output-1/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/glib-2.0/glib.h:32,
from /tmp/instance-0/output-1/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/glib-2.0/gobject/gbinding.h:28,
from /tmp/instance-0/output-1/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/glib-2.0/glib-object.h:22,
from /tmp/instance-0/output-1/build/poppler-0.84.0/glib/poppler.h:22,
from /tmp/instance-0/output-1/build/poppler-0.84.0/glib/poppler-action.cc:19:
/tmp/instance-0/output-1/build/poppler-0.84.0/glib/poppler-action.cc: In function 'GType poppler_dest_get_type()':
/tmp/instance-0/output-1/build/poppler-0.84.0/glib/poppler-private.h:155:13: error: argument 2 of '__atomic_load' must not be a pointer to a 'volatile' type
155 | if (g_once_init_enter (&g_define_type_id__volatile)) { \
| ^~~~~~~~~~~~~~~~~
/tmp/instance-0/output-1/build/poppler-0.84.0/glib/poppler-action.cc:28:1: note: in expansion of macro 'POPPLER_DEFINE_BOXED_TYPE'
28 | POPPLER_DEFINE_BOXED_TYPE (PopplerDest, poppler_dest, poppler_dest_copy, poppler_dest_free)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/dfcaac6487aaeb10412c3fe72a23135f8a70fefe
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update Cage to version 0.1.4, which is a bug fix release that
supports using wlroots 0.14.x.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to version 0.14.1, and adapt to upstream changes:
- seatd/libseat is now used unconditionally, the logind/elogind build
options have been removed (which can be used through seatd, no
functionality is lost).
- Now wlroots includes a software-based renderer (which uses pixman),
and the OpenGL ES one is optional. For now it is left always enabled
(as it was before) but this could be changed in the future.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to version 1.21, which is required by newer wlroots releases.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This affects the package jszip before 3.7.0. Crafting a new zip file
with filenames set to Object prototype values (e.g __proto__, toString,
etc) results in a returned object with a modified prototype instance.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libfuse3 is an optional dependency which is enabled by default since
version 6.0.0 and
https://gitlab.com/qemu-project/qemu/-/commit/0c9b70d5900a5108e899edfdd6f3790f8cb6bdc2
So add this dependency and fix the following build failures on musl
raised since bump to version 6.0.0 in commit
6b86c9335f:
../block/export/fuse.c: In function 'fuse_fallocate':
../block/export/fuse.c:563:23: error: 'FALLOC_FL_ZERO_RANGE' undeclared (first use in this function)
563 | } else if (mode & FALLOC_FL_ZERO_RANGE) {
| ^~~~~~~~~~~~~~~~~~~~
../block/export/fuse.c:563:23: note: each undeclared identifier is reported only once for each function it appears in
../block/export/fuse.c: In function 'fuse_lseek':
../block/export/fuse.c:639:19: error: 'SEEK_HOLE' undeclared (first use in this function)
639 | if (whence != SEEK_HOLE && whence != SEEK_DATA) {
| ^~~~~~~~~
../block/export/fuse.c:639:42: error: 'SEEK_DATA' undeclared (first use in this function); did you mean 'SEEK_SET'?
639 | if (whence != SEEK_HOLE && whence != SEEK_DATA) {
| ^~~~~~~~~
| SEEK_SET
Fixes:
- http://autobuild.buildroot.org/results/0196609043bd37543e6a0d17ffc2254302ea7ba3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with gcc 4.8 raised since bump to
version 4.3.2 in commit 91aa6efa85:
lib/tpm2_eventlog_yaml.c: In function 'yaml_uefi_var_unicodename':
lib/tpm2_eventlog_yaml.c:130:5: error: 'for' loop initial declarations are only allowed in C99 mode
for(size_t i = 0; i < data->UnicodeNameLength; ++i, tmp += ret) {
^
lib/tpm2_eventlog_yaml.c:130:5: note: use option -std=c99 or -std=gnu99 to compile your code
lib/tpm2_eventlog_yaml.c: In function 'yaml_specid_algs':
lib/tpm2_eventlog_yaml.c:335:5: error: 'for' loop initial declarations are only allowed in C99 mode
for (size_t i = 0; i < count; ++i, ++alg) {
^
Fixes:
- http://autobuild.buildroot.org/results/018c75cfbb34006c0bca52dcc255ad6f9cc43b77
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with gcc 11:
In file included from src/mongo/db/query/plan_cache.h:36,
from src/mongo/db/catalog/collection_info_cache.h:33,
from src/mongo/db/catalog/collection.h:42,
from src/mongo/db/exec/requires_collection_stage.h:32,
from src/mongo/db/exec/delete.h:32,
from src/mongo/db/query/internal_plans.h:33,
from src/mongo/db/query/internal_plans.cpp:32:
src/mongo/db/exec/plan_stats.h:214:10: error: 'optional' in namespace 'std' does not name a template type
214 | std::optional<std::string> replanReason;
| ^~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/8c0875fa413923504515a83d8b679366418c2444
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
exec_prefix has been removed since version 1.66 and
https://gitlab.gnome.org/GNOME/gobject-introspection/-/commit/a88b1ac548516ab25140a2e9dea8cac894bbac93
resulting in the following build failure with rygel because libgee
installs Gee-0.8.gir in
output/host/aarch64-buildroot-linux-gnu/sysroot/share/gir-1.0/Gee-0.8.gir
instead of
output/host/aarch64-buildroot-linux-gnu/sysroot/usr/share/gir-1.0/Gee-0.8.gir:
Could not find GIR file 'Gee-0.8.gir'; check XDG_DATA_DIRS or use --includedir
error parsing file RygelCore-2.6.gir: Failed to parse included gir Gee-0.8
If the above error message is about missing .so libraries, then setting up GIR_EXTRA_LIBS_PATH in the .mk file should help.
Typically like this: PKG_MAKE_ENV += GIR_EXTRA_LIBS_PATH="$(@D)/.libs"
So replace exec_prefix by prefix
Fixes:
- http://autobuild.buildroot.org/results/b04b27bbb84fa6ab9a8441e7bd94aad45226dce9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with gcc 11:
In file included from ../sconex/sconex.h:229,
from ../sconex/Descriptor.h:63,
from Descriptor.cpp:22:
Descriptor.cpp: In member function 'void scx::Descriptor::add_stream(scx::Stream*)':
Descriptor.cpp:150:22: error: ordered comparison of pointer with integer zero ('scx::Stream*' and 'int')
150 | DEBUG_ASSERT(stream>=0,"add_stream() Invalid stream");
| ~~~~~~^~~
Descriptor.cpp: In member function 'bool scx::Descriptor::remove_stream(scx::Stream*)':
Descriptor.cpp:204:22: error: ordered comparison of pointer with integer zero ('scx::Stream*' and 'int')
204 | DEBUG_ASSERT(stream>=0,"remove_stream() Invalid stream");
| ~~~~~~^~~
Fixes:
- http://autobuild.buildroot.org/results/ccc9562e83fd2bd312d21b3124be42dfe4b7e850
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
usbguard needs std::future to avoid the following build failure raised
since the addition of the package in commit
fbff7d7289:
In file included from src/Library/IPCClientPrivate.hpp:37:0,
from src/Library/IPCClientPrivate.cpp:24:
/home/buildroot/autobuild/run/instance-0/output-1/host/opt/ext-toolchain/arm-none-linux-gnueabi/include/c++/4.8.3/future:122:11: error: declaration of 'class std::promise<std::unique_ptr<google::protobuf::Message> >'
class promise;
^
src/Library/IPCClientPrivate.cpp: In member function 'usbguard::IPC::MessagePointer usbguard::IPCClientPrivate::qbIPCSendRecvMessage(usbguard::IPC::MessageType&)':
src/Library/IPCClientPrivate.cpp:244:26: error: invalid use of incomplete type 'class std::promise<std::unique_ptr<google::protobuf::Message> >'
auto future = promise.get_future();
^
Fixes:
- http://autobuild.buildroot.org/results/1c4e0dab5917e5559a97f7cf7a99e30a2b561fc9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix locale indepdendent which is enabled on musl since version 1.11.0
and
https://github.com/google/flatbuffers/commit/5f32f948102e65eaeea461b44f3b43f96c7a7a5a
resulting in the following build failure on snort3 since bump to version
3.1.6 in commit e66f2fd310:
In file included from /tmp/instance-0/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/include/flatbuffers/flexbuffers.h:24,
from /tmp/instance-0/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/include/flatbuffers/idl.h:26,
from /tmp/instance-0/output-1/build/snort3-3.1.6.0/src/network_inspectors/perf_monitor/fbs_formatter.cc:29:
/tmp/instance-0/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/include/flatbuffers/util.h: In function 'void flatbuffers::strtoval_impl(int64_t*, const char*, char**, int)':
/tmp/instance-0/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/include/flatbuffers/util.h:258:12: error: 'strtoll_l' was not declared in this scope; did you mean 'strcoll_l'?
258 | *val = __strtoll_impl(str, endptr, base);
| ^~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/68045b83e94f8caa337b1af7ed5f493ac1a55c47
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
osm2pgsql needs std::future since its addition in commit
46c4204286 to avoid the following build
failure:
In file included from /home/buildroot/autobuild/run/instance-3/output-1/build/osm2pgsql-1.4.2/src/db-copy.cpp:12:0:
/home/buildroot/autobuild/run/instance-3/output-1/build/osm2pgsql-1.4.2/src/db-copy.hpp:218:24: error: field 'barrier' has incomplete type
std::promise<void> barrier;
^
/home/buildroot/autobuild/run/instance-3/output-1/build/osm2pgsql-1.4.2/src/db-copy.hpp: In constructor 'db_cmd_sync_t::db_cmd_sync_t(std::promise<void>&&)':
/home/buildroot/autobuild/run/instance-3/output-1/build/osm2pgsql-1.4.2/src/db-copy.hpp:221:37: error: class 'db_cmd_sync_t' does not have any field named 'barrier'
: db_cmd_t(db_cmd_t::Cmd_sync), barrier(std::move(b))
^
In file included from /home/buildroot/autobuild/run/instance-3/output-1/build/osm2pgsql-1.4.2/src/middle.hpp:18:0,
from /home/buildroot/autobuild/run/instance-3/output-1/build/osm2pgsql-1.4.2/src/dependency-manager.cpp:11:
/home/buildroot/autobuild/run/instance-3/output-1/build/osm2pgsql-1.4.2/src/thread-pool.hpp: In member function 'void thread_pool_t::check_for_exceptions()':
/home/buildroot/autobuild/run/instance-3/output-1/build/osm2pgsql-1.4.2/src/thread-pool.hpp:49:19: error: invalid use of incomplete type 'class std::future<void>'
result.get();
^
Fixes:
- http://autobuild.buildroot.org/results/69528232ceba128a2e60aa778bb0943fdefc2ed1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Install polkit.its in $(HOST_DIR)/share/gettext/its as suggested by
https://gitlab.gnome.org/GNOME/gvfs/-/issues/508 to avoid the following
build failure with gvfs because polkit installs polkit.its in
$(STAGING_DIR)/usr/share/gettext:
FAILED: daemon/org.gtk.vfs.file-operations.policy
/tmp/instance-3/output-1/host/bin/meson --internal msgfmthelper daemon/org.gtk.vfs.file-operations.policy.in daemon/org.gtk.vfs.file-operations.policy xml /tmp/instance-3/output-1/build/gvfs-1.44.1/po
msgfmt: cannot locate ITS rules for daemon/org.gtk.vfs.file-operations.policy.in
Fixes:
- http://autobuild.buildroot.org/results/ba9a8b31e6e275d4db1905241a9153a0513eb335
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failures on arc and riscv32:
latency.c: In function 'display':
latency.c:326:21: error: format '%ld' expects argument of type 'long int', but argument 2 has type 'time_t' {aka 'long long int'} [-Werror=format=]
326 | ("RTT| %.2ld:%.2ld:%.2ld (%s, %Ld us period, "
| ~~~~^
| |
| long int
| %.2lld
327 | "priority %d)\n", dt / 3600,
| ~~~~~~~~~
| |
| time_t {aka long long int}
altency.c: In function ‘display’:
altency.c:262:21: error: format ‘%ld’ expects argument of type ‘long int’, but argument 2 has type ‘time_t’ {aka ‘long long int’} [-Werror=format=]
262 | ("RTT| %.2ld:%.2ld:%.2ld (%s, %Ld us period, "
| ~~~~^
| |
| long int
| %.2lld
263 | "priority %d)\n", dt / 3600,
| ~~~~~~~~~
| |
| time_t {aka long long int}
Fixes:
- http://autobuild.buildroot.org/results/448efe22e8fe058a1b354a3c124874e30b9ce138
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Correct RUBY_VERSION_EXT after commit be9783951d (package/ruby: security
bump to version 3.0.1):
ls output/target/usr/lib/ruby/
3.0.0 site_ruby vendor_ruby
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Build with tslib is broken since bump to version 1.25.0 in commit
cf57eceabc:
/data/buildroot-autobuilder/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/powerpc-buildroot-linux-uclibc/9.3.0/../../../../powerpc-buildroot-linux-uclibc/bin/ld: src/lib/ecore_fb/libecore_fb.so.1.25.1.p/ecore_fb_ts.c.o: in function `_ecore_fb_ts_fd_handler':
ecore_fb_ts.c:(.text+0x4c): undefined reference to `ts_read_raw'
Fixes:
- http://autobuild.buildroot.org/results/fa111306b95316eed54771550474dae804fa261e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
-latomic was added to extralibs to fix static build of ffmpeg in commit
fc8798197b. However, extralibs is not
added to libavformat.pc resulting in the following static build failure
of motion:
/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/9.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: /home/buildroot/autobuild/instance-1/output-1/host/bin/../arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libavformat.a(fifo.o): in function `fifo_init':
/home/buildroot/autobuild/instance-1/output-1/build/ffmpeg-4.4/libavformat/fifo.c:519: undefined reference to `__atomic_store_8'
So add a patch to add extralibs (and so -latomic) to all pkg-config
files
Fixes:
- http://autobuild.buildroot.org/results/62ec618e40081a250b8129ec6f5a178eb06fba1d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure on musl raised since bump to version
3.0.9 in commit 28b4947ed8:
In file included from /tmp/instance-5/output-1/build/bullet-3.09/src/LinearMath/btScalar.h:289,
from /tmp/instance-5/output-1/build/bullet-3.09/src/LinearMath/btVector3.h:19,
from /tmp/instance-5/output-1/build/bullet-3.09/src/LinearMath/btConvexHullComputer.h:18,
from /tmp/instance-5/output-1/build/bullet-3.09/Extras/VHACD/src/VHACD.cpp:28:
/tmp/instance-5/output-1/build/bullet-3.09/Extras/BulletRobotics/../../Extras/VHACD/inc/vhacdMutex.h: In constructor 'VHACD::Mutex::Mutex()':
/tmp/instance-5/output-1/build/bullet-3.09/Extras/BulletRobotics/../../Extras/VHACD/inc/vhacdMutex.h:97:54: error: 'PTHREAD_MUTEX_RECURSIVE_NP' was not declared in this scope; did you mean 'PTHREAD_MUTEX_RECURSIVE'?
97 | VHACD_VERIFY(pthread_mutexattr_settype(&mutexAttr, PTHREAD_MUTEX_RECURSIVE_NP) == 0);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/79cd2024b3dfc8d3e896cdacf67fb891df81ca6e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure on musl raised since the addition of the
package in commit eb91fa730c:
/tmp/instance-1/output-1/build/ogre-1.12.0/OgreMain/src/OgreStringConverter.cpp: In static member function 'static bool Ogre::StringConverter::parse(const String&, Ogre::int32&)':
/tmp/instance-1/output-1/build/ogre-1.12.0/OgreMain/src/OgreStringConverter.cpp:253:22: error: 'strtol_l' was not declared in this scope; did you mean 'strtold_l'?
253 | ret = (int32)strtol_l(val.c_str(), &end, 0, _numLocale);
| ^~~~~~~~
| strtold_l
Fixes:
- http://autobuild.buildroot.org/results/491f89e45610a7752c0700ac02b80a92b7876ec3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
qt5declarative builds qmltyperegistrar for the host as part of its build
process.
When building qt target packages (which is the case for qt5declarative),
-spec devices/linux-buildroot-g++ is passed to qmake in QT5_QMAKE
variable and this spec currently has -latomic in its LIBS.
This -latomic makes it to the build of the host build of
qmltyperegistrar which is not useful.
This was discovered on Fedora 34 where libatomic is not pulled with gcc
package, therefore was missing on the host machine.
This makes sure that -latomic is not added for host build of qt
packages.
Fixes: 7d286be4f9 ("package/qt5base: link with -latomic when needed")
Cc: Quentin Schulz <foss@0leil.net>
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the folllowing build failure with uclibc-ng which is raised since
activation of uclibc-ng in commit
a4dc754178:
In file included from ./sys/random.h:40,
from getrandom.c:22:
/tmp/instance-0/output-1/host/x86_64-buildroot-linux-uclibc/sysroot/usr/include/sys/random.h:27:35: error: unknown type name 'size_t'
27 | extern int getrandom(void *__buf, size_t count, unsigned int flags)
| ^~~~~~
/tmp/instance-0/output-1/host/x86_64-buildroot-linux-uclibc/sysroot/usr/include/sys/random.h:8:1: note: 'size_t' is defined in header '<stddef.h>'; did you forget to '#include <stddef.h>'?
7 | #include <features.h>
+++ |+#include <stddef.h>
8 |
Fixes:
- http://autobuild.buildroot.org/results/30105094e39374ec6d4e47e2fb5e99696f7f7981
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the follownig build failure on ARM big endian raised since bump to
version 3.68 in commit 0a73b9b962:
Linux2.6_aarch64_aarch64_be-linux-gnu-gcc_glibc_PTH_64_DBG.OBJ/Linux_SINGLE_SHLIB/sha256-armv8.o: In function `SHA256_Compress_Native':
sha256-armv8.c:(.text.SHA256_Compress_Native+0x0): multiple definition of `SHA256_Compress_Native'
Linux2.6_aarch64_aarch64_be-linux-gnu-gcc_glibc_PTH_64_DBG.OBJ/Linux_SINGLE_SHLIB/sha512.o:sha512.c:(.text.SHA256_Compress_Native+0x0): first defined here
Linux2.6_aarch64_aarch64_be-linux-gnu-gcc_glibc_PTH_64_DBG.OBJ/Linux_SINGLE_SHLIB/sha256-armv8.o: In function `SHA256_Update_Native':
sha256-armv8.c:(.text.SHA256_Update_Native+0x0): multiple definition of `SHA256_Update_Native'
Linux2.6_aarch64_aarch64_be-linux-gnu-gcc_glibc_PTH_64_DBG.OBJ/Linux_SINGLE_SHLIB/sha512.o:sha512.c:(.text.SHA256_Update_Native+0x0): first defined here
Fixes:
- http://autobuild.buildroot.org/results/237aba0c16a34fec1b0fe50fe08cace438eda1bf
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the folllowing build failure with uclibc-ng which is raised since
bump to version 1.34 in commit 27fffea6db:
In file included from ./sys/random.h:40,
from getrandom.c:22:
/tmp/instance-0/output-1/per-package/tar/host/x86_64-buildroot-linux-uclibc/sysroot/usr/include/sys/random.h:27:35: error: unknown type name 'size_t'
27 | extern int getrandom(void *__buf, size_t count, unsigned int flags)
| ^~~~~~
/tmp/instance-0/output-1/per-package/tar/host/x86_64-buildroot-linux-uclibc/sysroot/usr/include/sys/random.h:8:1: note: 'size_t' is defined in header '<stddef.h>'; did you forget to '#include <stddef.h>'?
7 | #include <features.h>
+++ |+#include <stddef.h>
8 |
Fixes:
- http://autobuild.buildroot.org/results/f40e09d621ab5ba66dd97138dec174acfb7fda2a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with libglib >= 2.68 raised since commit
c72524fb1b:
In file included from /tmp/instance-0/output-1/host/mips64el-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0/glib/gatomic.h:31,
from /tmp/instance-0/output-1/host/mips64el-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0/glib/gthread.h:32,
from /tmp/instance-0/output-1/host/mips64el-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0/glib/gasyncqueue.h:32,
from /tmp/instance-0/output-1/host/mips64el-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0/glib.h:32,
from /tmp/instance-0/output-1/host/mips64el-buildroot-linux-uclibc/sysroot/usr/include/libsigrokdecode/libsigrokdecode.h:25,
from /tmp/instance-0/output-1/build/pulseview-0.4.2/pv/data/decode/annotation.cpp:21:
/tmp/instance-0/output-1/host/opt/ext-toolchain/mips64el-buildroot-linux-uclibc/include/c++/8.4.0/type_traits:56:3: error: template with C linkage
template<typename _Tp, _Tp __v>
^~~~~~~~
/tmp/instance-0/output-1/build/pulseview-0.4.2/pv/data/decode/annotation.cpp:20:1: note: 'extern "C"' linkage started here
extern "C" {
^~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/33cbaaeefd8637bac4ad0fbbfae7c369de4875d2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit
cf176128ec ("boot/arm-trusted-firmware:
add SSP option"), we are passing ENABLE_STACK_PROTECTOR=none when we
want to disable SSP usage in TF-A. While this works fine in recent
versions of TF-A, older versions such as TF-A will end up passing
-fstack-protector-none in this situation, which fails as this is not a
valid gcc option (the valid gcc option is -fno-stack-protector).
To solve this, we pass ENABLE_STACK_PROTECTOR=0 which was in older
TF-A versions used to say "don't do anything with SSP", and is also
still supported in newer versions of TF-A.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1478738580
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues:
- CVE-2021-31810: Trusting FTP PASV responses vulnerability in Net::FTP
- CVE-2021-32066: A StartTLS stripping vulnerability in Net::IMAP
- CVE-2021-31799: A command injection vulnerability in RDoc
For more details, see the announcement:
https://www.ruby-lang.org/en/news/2021/07/07/ruby-3-0-2-released/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2021-22930: Use after free on close http2 on stream canceling (High)
Node.js is vulnerable to a use after free attack where an attacker might
be able to exploit the memory corruption, to change process behavior.
Drop 0002-Fix-build-with-ICU-68.patch as this is now fixed upstream since
https://github.com/nodejs/node/commit/e459c79b02
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We can drop all the patches as they have been sorted out in upstream.
The wrapped fmt was dropped, so drop the corresponding option.
The option to use a system pybind11 was named differently upstream, as a
feature rather as a boolean. Adapt accordingly.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
[yann.morin.1998@free.fr: explain dropped/changed options]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, for a static-only build, we pass -Dstatic-libc=true. The
reason for that was not recorded when the package was converted to
meson.
The -Dstatic-libc=true option, despite its name, is not about linking
statically against libc, but against libgcc and libstdc++.
In Buildroot, we forcibly pass -static when calling the compiler and
linker, so everything is already linked statically.
For a shared build, -Dstatic-libc=false has no effect at all.
Drop this option altogether, as it is not needed, and is confusing.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
[yann.morin.1998@free.fr: expand commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Set warning_level to 1 instead of the default value of 2 to disable
stack-protector and avoid the following build failure since the addition
of the package in commit ccfc90e101:
/tmp/instance-5/output-1/host/opt/ext-toolchain/bin/../lib/gcc/i686-buildroot-linux-uclibc/9.3.0/../../../../i686-buildroot-linux-uclibc/bin/ld: tests/commandhelper.p/commandhelper.c.o: in function `printInput':
commandhelper.c:(.text+0xad): undefined reference to `__stack_chk_guard'
Fixes:
- http://autobuild.buildroot.org/results/a2657eb18b579752c8217ab356adcb52931f6785
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
- move to a separate assignment
- add a big fat comment to explain it
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since qemu started using ninja, they have the following fragment in the
Makefile:
MAKE.n = $(findstring n,$(firstword $(MAKEFLAGS)))
NINJAFLAGS = ... $(if $(MAKE.n), -n) ...
Buildroot's generated makefile in the O= directory invokes make in the
base buildroot with --no-print-directory. However, make's placement of
the --no-print-directory in MAKEFLAGS varies between the versions of
the host make; make 4.3 places that at the end while make 3.82 places
it at the beginning. As a result, if building on a system with an older
host make, qemu's makefile invokes `ninja -n` which does not generate
any outputs.
To reproduce, on a CentOS 7 machine or docker image:
mkdir /tmp/br-build && cd /tmp/br-build
make -C ~/buildroot pc_x86_64_bios_defconfig O=`pwd`
make menuconfig # Switch to glibc, enable "QEMU" and "QEMU tools"
make all # Build succeeds
find target -name qemu-img # No binary has been built
Pick up the fix commited in Qemu upstream.
Signed-off-by: Alexey Neyman <stilor@att.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This defconfig is download at91bootstrap3 using a tarball, not over
git.
Fixes:
configs/microchip_sama5d2_icp_mmc_dev_defconfig:63:warning: override: BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL changes choice state
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig is download at91bootstrap3 using a tarball, not over
git.
Fixes:
configs/microchip_sama5d2_icp_mmc_defconfig:20:warning: override: BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL changes choice state
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
RISC-V 32-bit was special cased to use glibc master as support was not
in a released version.
Recently 2.33 was released, so RV32 can now use the same glibc version
as other platforms.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Link with -latomic if needed to avoid the following build failure with
openssl:
configure:10549: checking for X509_STORE_CTX_new in -lcrypto
configure:10574: /tmp/instance-0/output-1/host/bin/sparc-linux-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I/tmp/instance-0/output-1/host/sparc-buildroot-linux-uclibc/sysroot/usr/include -static -L/tmp/instance-0/output-1/host/sparc-buildroot-linux-uclibc/sysroot/usr/lib conftest.c -lcrypto -lz >&5
/tmp/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/9.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: /tmp/instance-0/output-1/host/sparc-buildroot-linux-uclibc/sysroot/usr/lib/libcrypto.a(x509cset.o): in function `X509_CRL_up_ref':
x509cset.c:(.text+0xfc): undefined reference to `__atomic_fetch_add_4'
Ideally, mutt should use pkg-config but upstream don't want to use it:
https://gitlab.com/muttmua/mutt/-/merge_requests/25
Fixes:
- http://autobuild.buildroot.org/results/e357984853f8ca879156245717fadbeaa9b0dbae
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure with gcc 11:
linux.c:165:50: error: argument 7 of type 'const xen_pfn_t[]' {aka 'const long long unsigned int[]'} declared as an ordinary array [-Werror=vla-parameter]
165 | const xen_pfn_t arr[/*num*/], int err[/*num*/])
| ~~~~~~~~~~~~~~~~^~~~~~~~~~~~
In file included from linux.c:29:
private.h:35:50: note: previously declared as a variable length array 'const xen_pfn_t[num]' {aka 'const long long unsigned int[num]'}
35 | const xen_pfn_t arr[num], int err[num]);
| ~~~~~~~~~~~~~~~~^~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/f70d060cf50254694113f19f50a8ef96ef33dd1a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since bump to version 0.22.3 in commit b6576a458c (package/mpd: bump
to version 0.22.3), mpd needs gcc >= 8, as documented in their manual
[0], to avoid the following build failure with gcc 7.3.1:
/tmp/instance-7/output-1/host/opt/ext-toolchain/aarch64-linux-gnu/include/c++/7.3.1/bits/stl_tree.h:2091:28: error: no matching function for call to 'std::_Rb_tree<std::__cxx11::basic_string<char>, std::pair<const std::__cxx11::basic_string<char>, std::__cxx11::basic_string<char> >, std::_Select1st<std::pair<const std::__cxx11::basic_string<char>, std::__cxx11::basic_string<char> > >, std::less<std::__cxx11::basic_string<char> >, std::allocator<std::pair<const std::__cxx11::basic_string<char>, std::__cxx11::basic_string<char> > > >::_M_get_insert_unique_pos(std::pair<std::basic_string_view<char>, std::basic_string_view<char> >::first_type&)'
= _M_get_insert_unique_pos(_KeyOfValue()(__v));
~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/4888d99404cc4273349ab036035c5ff7e086b83e
[0] https://mpd.readthedocs.io/en/stable/user.html#compiling-from-source)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: reword commit log to reference the manual]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Disable vhost-user on uclibc-ng as it raises build failures since bump
to version 6.0.0 in commit 6b86c9335f and
https://github.com/qemu/qemu/commit/810033be083040591fee2fc09f2f294670ed1930
The issue is that F_ADD_SEALS and F_SEAL_xxx variables are not defined on
uclibc-ng (even if MFD_ALLOW_SEALING is defined) resulting in the
following build failure:
../subprojects/libvhost-user/libvhost-user.c:1637:22: error: 'F_ADD_SEALS' undeclared (first use in this function)
1637 | ret = fcntl(*fd, F_ADD_SEALS, flags);
| ^~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/9f393539931b51191cf7128e5c618c2398fc86c1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: use conditional block like for all other OPTS]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
After more than a decade, libESMTP version 1.0.6 is superceded. Despite
proving robust a little bitrot has occurred, especially regarding
OpenSSL support. The original application data APIs are prone to memory
leaks and are deprecated in favour of safer replacements. Version 1.1
updates libESMTP without breaking API and ABI compatibility and
provides a basis for future development.
In addition to updates to the codebase, documentation is modernised and
is more comprehensive.
All libESMTP users are encouraged to upgrade from version 1.0.6.
- Update license files
- Update indentation in hash file (two spaces)
- Switch to meson-package
- Handle threads and tls meson options
- libesmtp-config has been dropped:
https://github.com/libesmtp/libESMTP/issues/8
- Fix CVE-2019-19977: libESMTP through 1.0.6 mishandles domain copying
into a fixed-size buffer in ntlm_build_type_2 in ntlm/ntlmstruct.c, as
demonstrated by a stack-based buffer over-read.
https://github.com/libesmtp/libESMTP/releases/tag/v1.1.0https://libesmtp.github.io/changes-since-v1.0.6.html
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When the config fragment provided by the user is not usable with a
specific toolchain configuration, the resulting .config file was kept
around.
In a follow up commit, we'll need to know, from outside test-pkg, if a
specific configuration was indeed usable or not.
So, unless if the user actually requested to keep the build directories,
remove the .config file when it contains a configration that would be
skipped.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In a followup commit, the make command used to log and display the last
lines on error will be used in another job.
Factorize it by introducing .run_make template.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
If the libzstd DSO is available, then link the tool
against it.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Create libzstd.pc in the build step instead of triggering a
lazy build during installation when it is missing.
Move PREFIX=/usr to ZSTD_OPTS. It is needed for building libzstd.pc
during the build step; for consistency, make sure it's available in all
steps.
Attach '-release' to the targets, since the default is to
build lib-release and zstd-release. Its only effect is to clear
DEBUGFLAGS (which are just warning flags).
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[Arnout: add check-package disable]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This is based on Yann's and Arnout's experience with migrating
Buildroot.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: add "For more details, "]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The pixman package exhibits gcc bug 101737 when built for the SH4
architecture with optimization enabled, which causes a build failure.
As done for other packages in Buildroot work around this gcc bug by
setting optimization to -O0 if BR2_TOOLCHAIN_HAS_GCC_BUG_101737=y.
Also let's add PIXMAN_CFLAGS and pass the Codesourcery work around CFLAGS
to it for consistency like we do for the rest of the packages.
Fixes:
http://autobuild.buildroot.net/results/b20/b20869bbb48edb1f0a847ea9e2e1a0462d6350be/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
MuPDF through 1.18.1 has an out-of-bounds write because the cached color
converter does not properly consider the maximum key size of a hash
table. This can, for example, be seen with crafted "mutool draw" input.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
QPDF 9.x through 9.1.1 and 10.x through 10.0.4 has a heap-based buffer
overflow in Pl_ASCII85Decoder::write (called from Pl_AES_PDF::flush and
Pl_AES_PDF::finish) when a certain downstream write fails.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure with gcc 11:
In file included from /tmp/instance-4/output-1/build/uhd-3.15.0.0/host/lib/usrp/dboard/e3xx/e3xx_ad9361_iface.hpp:14,
from /tmp/instance-4/output-1/build/uhd-3.15.0.0/host/lib/usrp/dboard/e3xx/e3xx_ad9361_iface.cpp:7:
/tmp/instance-4/output-1/build/uhd-3.15.0.0/host/lib/include/uhdlib/utils/rpc.hpp: In function 'bool {anonymous}::await_rpc_connected_state(std::shared_ptr<rpc::client>, std::chrono::milliseconds)':
/tmp/instance-4/output-1/build/uhd-3.15.0.0/host/lib/include/uhdlib/utils/rpc.hpp:28:27: error: 'sleep_for' is not a member of 'std::this_thread'
28 | std::this_thread::sleep_for(std::chrono::milliseconds(1));
| ^~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/1591ff7fabb09e4eb79f3aa293fbb228c255c45b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
network-manager needs gcc >= 4.9 since bump to version 1.32.2 in commit
360d1aad84 to avoid the following build
failure:
src/libnm-core-impl/nm-setting-bond.c: At top level:
src/libnm-core-impl/nm-setting-bond.c:149:5: error: array initialized from non-constant array expression
NM_MAKE_STRV("stable", "bandwidth", "count");
^
Fixes:
- http://autobuild.buildroot.org/results/dc270ead82707f89d47616a0c18629715c6ea1a5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Existing patch is for 3.13.0 optee version but is located at the root
of optee-os folder, leading to error when applying it on more recent
version. Move it to a dedicated 3.13.0 folder.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure with gcc 11:
/tmp/instance-0/output-1/build/libebml-1.4.2/src/EbmlString.cpp: In member function 'virtual filepos_t libebml::EbmlString::ReadData(libebml::IOCallback&, libebml::ScopeMode)':
/tmp/instance-0/output-1/build/libebml-1.4.2/src/EbmlString.cpp:147:41: error: 'numeric_limits' is not a member of 'std'
147 | auto Buffer = (GetSize() + 1 < std::numeric_limits<std::size_t>::max()) ? new (std::nothrow) char[GetSize() + 1] : nullptr;
| ^~~~~~~~~~~~~~
/tmp/instance-0/output-1/build/libebml-1.4.2/src/EbmlString.cpp:147:67: error: expected primary-expression before '>' token
147 | auto Buffer = (GetSize() + 1 < std::numeric_limits<std::size_t>::max()) ? new (std::nothrow) char[GetSize() + 1] : nullptr;
| ^
/tmp/instance-0/output-1/build/libebml-1.4.2/src/EbmlString.cpp:147:70: error: '::max' has not been declared; did you mean 'std::max'?
147 | auto Buffer = (GetSize() + 1 < std::numeric_limits<std::size_t>::max()) ? new (std::nothrow) char[GetSize() + 1] : nullptr;
| ^~~
| std::max
Fixes:
- http://autobuild.buildroot.org/results/3a28507127eae47994ca62e2b656da32bd2fb1f8
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since its addition in commit fbff7d7289,
usbguard needs a crypto backend otherwise the build will fail on:
checking for sodium... no
checking for libcrypto... no
checking for powerpc-buildroot-linux-uclibc-libgcrypt-config... no
checking for libgcrypt-config... no
checking for LIBGCRYPT - version >= 1.5.0... no
configure: error: The selected crypto backend library is not available.
So select sodium as the default crypto backend as this is the default
choice in configure.ac.
Fixes:
- http://autobuild.buildroot.org/results/fb9865e2c65ea1dd9a657e1181a6c8c49481fda7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following static build failure with libsndfile raise since
commit dbc6e9e9f3:
/tmp/instance-3/output-1/host/lib/gcc/xtensa-buildroot-linux-uclibc/10.3.0/../../../../xtensa-buildroot-linux-uclibc/bin/ld: /tmp/instance-3/output-1/host/bin/../xtensa-buildroot-linux-uclibc/sysroot/usr/lib/libsndfile.a(libsndfile_la-flac.o): in function `flac_byterate':
flac.c:(.text+0xfc): undefined reference to `FLAC__StreamDecoderErrorStatusString'
Fixes:
- http://autobuild.buildroot.org/results/92ed30a6855ca11800b779718822bcba4a69c9a3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Use --without-foo options to disable unused features, as they have been
fixed since version 3.3.8
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure with gcc 11:
/tmp/instance-1/output-1/build/libuwsc-3.3.5/src/lua/uwsc_lua.c: In function 'uwsc_lua_on':
/tmp/instance-1/output-1/build/libuwsc-3.3.5/src/lua/uwsc_lua.c:177:5: error: this 'else' clause does not guard... [-Werror=misleading-indentation]
177 | else
| ^~~~
/tmp/instance-1/output-1/build/libuwsc-3.3.5/src/lua/uwsc_lua.c:180:9: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'else'
180 | return 0;
| ^~~~~~
Fixes:
- http://autobuild.buildroot.org/results/1b031667e6d184493ea55ea6630272af4e475375
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
-std=c++11 has been wrongly removed from CFLAGS since commit
c5ca521e23 resulting in the following
build failure:
In file included from /home/buildroot/autobuild/run/instance-1/output-1/build/openzwave-62444b0f979c337d2091d77d89cf63c2ae9775cf/cpp/src/Driver.h:38:0,
from /home/buildroot/autobuild/run/instance-1/output-1/build/openzwave-62444b0f979c337d2091d77d89cf63c2ae9775cf/cpp/src/Manager.h:39,
from Main.cpp:37:
/home/buildroot/autobuild/run/instance-1/output-1/build/openzwave-62444b0f979c337d2091d77d89cf63c2ae9775cf/cpp/src/Node.h:566:32: error: 'std::shared_ptr' has not been declared
void SetProductDetails(std::shared_ptr<Internal::ProductDescriptor> product);
^
Fixes:
- http://autobuild.buildroot.org/results/a7999ffe3b93391b9a20dcfa3ddd9d21daf0cace
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
opcache needs dynamic library since version 8.0.0 and
https://github.com/php/php-src/commit/9a06876072b9ccb023d4a14426ccb587f10882f3
otherwise the build will fail on:
/tmp/instance-4/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/9.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: /tmp/instance-4/output-1/host/bin/../arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libc.a(__uClibc_main.os): in function `__uClibc_fini':
__uClibc_main.c:(.text+0x15c): undefined reference to `__fini_array_start'
/tmp/instance-4/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/9.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: __uClibc_main.c:(.text+0x160): undefined reference to `__fini_array_end'
Fixes:
- http://autobuild.buildroot.org/results/526d2e3108ff2506482d1665bcc3ed083961430f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure with wolfssl raised since bump to
version 3.12.1 in commit 4d85defa71:
/tmp/instance-4/output-1/build/libuhttpd-3.12.1/src/ssl/openssl.c: In function 'ssl_context_new':
/tmp/instance-4/output-1/build/libuhttpd-3.12.1/src/ssl/openssl.c:174:33: error: 'tls13_ciphersuites' undeclared (first use in this function)
174 | SSL_CTX_set_ciphersuites(c, tls13_ciphersuites);
| ^~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/25db1e999950bbee069ba7364a228184a6a77808
Note: we have a reference to a pull request on the 'ssl' repository,
because it is a git submodule of libuhttpd.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: explain the reference to ssl/pull/1]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
"This release brings in some missing MQTT v5 features, support for
websocket headers and proxies, ALPN protocol lists, adds the builder
pattern for options, and fixes a number of bugs in both the C++ library
and the underlying C lib."
https://github.com/eclipse/paho.mqtt.cpp/releases/tag/v1.2.0
This also makes the patch obsolete, since these changes have been merged upstream.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Highly parallel host-python3 builds sometimes fail with:
Exception in thread Thread-1:
Traceback (most recent call last):
File "/tmp/instance-3/output-1/host/lib/python3.9/threading.py", line 973, in _bootstrap_inner
self.run()
File "/tmp/instance-3/output-1/host/lib/python3.9/concurrent/futures/process.py", line 317, in run
result_item, is_broken, cause = self.wait_result_broken_or_wakeup()
File "/tmp/instance-3/output-1/host/lib/python3.9/concurrent/futures/process.py", line 376, in wait_result_broken_or_wakeup
worker_sentinels = [p.sentinel for p in self.processes.values()]
File "/tmp/instance-3/output-1/host/lib/python3.9/concurrent/futures/process.py", line 376, in <listcomp>
worker_sentinels = [p.sentinel for p in self.processes.values()]
RuntimeError: dictionary changed size during iteration
During the compile_all.py step of host-python3. This issue is reported
upstream at https://bugs.python.org/issue43498, and while not yet
fixed upstream, a PR was proposed with a possible fix for it. Seems
the PR seems reasonable, let's give it a chance and see if it improves
the situation.
Hopefully Fixes:
http://autobuild.buildroot.net/results/ae6c4ab292589a4e4442dfb0a1286349a9bf4d29/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* drop CMakeLists.txt patch applied upstream.
* Update patch for wrap_memcpy.cc to match changed target file.
* update patch numbering.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for xserver_xorg-server is added by the services/xserver module
in the SELinux refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use Buildroot's setting for optimization, zstd's build system
overrides CFLAGS (adds -O3), but MOREFLAGS can override again.
Quick tests show that using -O2 (like buildroot)
is actually a little faster than -O3 on x86_64 Atoms.
Disable the legacy format, these are just needed for
decompressing files created with pre-release version.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Dynamic build without threads is broken since bump to version 1.5.0 in
commit aad8bbf588
Indeed, dynamic library is built with threads support since
https://github.com/facebook/zstd/commit/91465e23b2710de031a762874cafb417f8b7556e
To fix this build failure, add -nomt if needed however libzstd-nomt is a
"special target that builds a library in single-thread mode _and_
without zstdmt_compress.c". For an unknown reason, this target fails to
build and don't create any symlinks so replace libzstd-{mt,nomt} by
lib-{mt,nomt} even if this will have the side effect of building a
shared and a static version of the library.
Move the existing HAVE_THREAD setting in the same condition.
While at it, also replace "libzstd.a libzstd" by "lib"
Fixes:
- http://autobuild.buildroot.org/results/e609601a0fc91c44d88a12c35b29ce937381462f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Arnout: move HAVE_THREAD in the same condition]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since bump to version 3.4.7 in
commit bb75c4b541:
/tmp/instance-5/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/9.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: ui/qt/CMakeFiles/qtui.dir/sequence_diagram.cpp.o: undefined reference to symbol '__atomic_compare_exchange_4@@LIBATOMIC_1.0'
/tmp/instance-5/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/9.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: /tmp/instance-5/output-1/host/sparc-buildroot-linux-uclibc/sysroot/lib/libatomic.so.1: error adding symbols: DSO missing from command line
Fixes:
- http://autobuild.buildroot.org/results/6617ee0e0046a0452a1515b89e9c704b1c125ec4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Workaround for gcc bug 68485 doesn't work anymore since bump to version
3.21 in commit 5b3e721399 because CXXFLAGS
is appended after CFLAGS and does not contain -O0:
/tmp/instance-7/output-1/host/bin/microblazeel-linux-gcc -o rtcm2_json.os -c --sysroot=/tmp/instance-7/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot -pthread -Wall -Wcast-align -Wextra -Wimplicit-fallthrough -Wmissing-declarations -Wmissing-prototypes -Wno-missing-field-initializers -Wno-uninitialized -Wpointer-arith -Wreturn-type -Wstrict-prototypes -Wvla -O0 -Os -g0 -pthread -fPIC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I/tmp/instance-7/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/include/dbus-1.0 -I/tmp/instance-7/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/lib/dbus-1.0/include rtcm2_json.c
during RTL pass: reload
rtcm2_json.c: In function ‘json_rtcm2_read’:
rtcm2_json.c:267:1: internal compiler error: in gen_reg_rtx, at emit-rtl.c:1155
267 | }
| ^
It should be noted that GPSD_CXXFLAGS was added 5 years ago with commit
b4c050e9af but was not actually used in
that commit or any later.
Fixes:
- http://autobuild.buildroot.org/results/fab33f25b08fa218af91640fdbd8c0dcf1d07228
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Set back -fPIC in CFLAGS which was wrongly removed as a side effect of
commit c5ca521e23.
Another side-effect of that commit was to remove
-DSYSCONFDIR="\"$(PREFIX)/etc/openzwave/\"" - however, we don't need
SYSCONFDIR to be set, since /etc/openzwave is checked first anyway (see
cpp/src/Options.cpp).
Fixes:
- http://autobuild.buildroot.org/results/161f53574697016ab8bdb91aaaf4a2be5410ebb0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This restricts the Erlang RISC-V update from
0bab8c1089 to only enabling RISCV_64
rather than enabling builds on all platforms with toolchains that
include atomics.
This fixes build errors on SPARCv8 and other platforms that look like
this:
/tmp/ccD9Q9F7.s: Assembler messages:
/tmp/ccD9Q9F7.s:230: Error: Architecture mismatch on "cas [%g3],%g2,%g1".
/tmp/ccD9Q9F7.s:230: (Requires v9|v9a|v9b|v9c|v9d|v9e|v9v|v9m|m8; requested architecture is v8.)
Fixes:
http://autobuild.buildroot.net/results/a57/a5779e22c41eb63b8400409f26f96b924fdde1bc/
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
armadillo can use lapack or openblas as BLAS provider. LAPACK support is
optional.
This patch
- adds an _ARCH_SUPPORTS variable to check if one is available
- adds an option to choose lapack or openblas as BLAS provider
The choice is required since applications may potentially need lapack.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Force Release build to avoid the following build failure which is raised
since the addition of the package in commit
4634e84978:
/tmp/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/i586-buildroot-linux-musl/9.3.0/../../../../i586-buildroot-linux-musl/bin/ld: cannot find -lasan
/tmp/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/i586-buildroot-linux-musl/9.3.0/../../../../i586-buildroot-linux-musl/bin/ld: cannot find -lubsan
Fixes:
- http://autobuild.buildroot.org/results/83274082879f9599bc106e12a253f4b9229ea00b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Disable -Werror to avoid the following build failures raised since bump
to version 1.2.2 in commit b436b82411:
/tmp/instance-0/output-1/build/open62541-v1.2.2/arch/network_tcp.c: In function 'connection_recv':
/tmp/instance-0/output-1/build/open62541-v1.2.2/arch/network_tcp.c:96:5: error: conversion to 'unsigned int' from 'int' may change the sign of the result [-Werror=sign-conversion]
96 | UA_fd_set(connection->sockfd, &fdset);
| ^~~~~~~~~
/tmp/instance-6/output-1/build/open62541-v1.2.2/plugins/ua_pubsub_udp.c: In function 'UA_PubSubChannelUDPMC_receive':
/tmp/instance-6/output-1/build/open62541-v1.2.2/plugins/ua_pubsub_udp.c:477:21: error: conversion to '__suseconds_t' {aka 'int'} from 'UA_UInt32' {aka 'unsigned int'} may change the sign of the result [-Werror=sign-conversion]
477 | tmptv.tv_usec = (long int)(timeout % 1000000);
| ^
Fixes:
- http://autobuild.buildroot.org/results/911811de81d8abb2a31feb8f27af1592641c6fbc
- http://autobuild.buildroot.org/results/f0187b3f2d62e955fddeef4e90f84ba4fd642bd2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
To fix this bug we have to use an undocumented test variable to enable
the nightly target-applies-to-host feature so that the target linker
doesn't get used for host binaries like the build-script.
Fixes:
error: failed to run custom build command for `ripgrep v0.8.1 (/home/buildroot/buildroot/output/build/ripgrep-0.8.1)`
Caused by:
process didn't exit successfully: `/home/buildroot/buildroot/output/build/ripgrep-0.8.1/target/release/build/ripgrep-59eeb7069534e1ef/build-script-build` (exit status: 1)
--- stderr
/home/buildroot/buildroot/output/build/ripgrep-0.8.1/target/release/build/ripgrep-59eeb7069534e1ef/build-script-build: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.33' not found (required by /home/buildroot/buildroot/output/build/ripgrep-0.8.1/target/release/build/ripgrep-59eeb7069534e1ef/build-script-build)
Details:
https://github.com/rust-lang/cargo/issues/3349https://github.com/rust-lang/cargo/pull/9322
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Support for tpm2-tools is added by the services/tpm2 module in the
SELinux refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Support for tpm2-totp is added by the services/tpm2 module in the
SELinux refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Support for tpm2-abrmd is added by the services/tpm2 module in the
SELinux refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
GCC 11 defaults to C++17. Fix the following build failure with gcc 11:
In file included from _internal/Source/JSONDefs.h:12,
from _internal/Source/JSONDebug.h:4,
from _internal/Source/JSONNode.h:4,
from _internal/Source/JSONNode.cpp:1:
_internal/Source/JSONDefs/GNU_C.h:58:28: error: ISO C++17 does not allow dynamic exception specifications
58 | #define json_throws(x) throw(x)
| ^~~~~
Fixes:
- http://autobuild.buildroot.org/results/1e66dff705bbb38e7e0f0e5864ce794b4345dcc6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
OpenCV-4's buildsystem will try to detect ccache and use it if
available. This may yield a system-installed ccache.
However, in Buildroot, ccache is entirely hidden away and handled in the
toolchain wrapper.
Forcibly disable detection of ccache.
Commit 505e7f4771 already applied this
change to opencv3.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Build with libmaxminddb is broken since bump to version 3.0.5 in commit
464d0be380 because of
https://github.com/SpiderLabs/ModSecurity/commit/785958f9b5089b918c7d054cbcc2fe4a3c7b3788
So revert this commit until upstream answer to comment to
https://github.com/SpiderLabs/ModSecurity/issues/2131
Reverting this commit requires autoreconfiguring, which itself causes
lots of warnings as configure.ac queries git to know the version of
various parts of libmodsecurity. However, it turns out that those
versions are only used to be displayed in the output of the configure
script, which is quite useless. The only one that is referenced
elsewhere is LIBINJECTION_VERSION, but it's in fact a different thing:
it is defined by others/libinjection/src/libinjection_sqli.c.
The only variable that was AC_SUBST() and therefore visible elsewhere
was MSC_GIT_VERSION, but it is not used anywhere in the code base,
except in the configure script itself.
Note that one patch is 0001 and the other 0003, because there was
already a 0002 patch.
Fixes:
- http://autobuild.buildroot.org/results/4c639fd967faa06f8ae362bacd38f3409c47267c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since upstream commit 5da4da99e0bb3d694e93046207ae4ce3b5545043, in
3.13.0, OP-TEE client unconditionally uses the MMC_IOC_MULTI_CMD
ioctl(). But this ioctl() was only introduced in kernel 4.3, so
earlier kernels did not have this definition.
This was clearly known when upstream started using this ioctl. From
the upstream commit 5da4da99e0bb3d694e93046207ae4ce3b5545043 commit
log:
As MMC_IOC_MULTI_CMD is available since linux 4.3, we should be safe to
use it by default on read / write block operations.
So let's propagate this dependency into Buildroot.
Fixes:
http://autobuild.buildroot.net/results/bd270a6793df499d5f52959e3de17f8a92d88305/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use pkg-config to find numa to avoid the following build failure when
checking for numa_available:
configure:9667: checking for numa_available in -lnuma
configure:9692: /tmp/instance-7/output-1/host/bin/microblazeel-linux-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -static -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c -lnuma >&5
/tmp/instance-7/output-1/host/opt/ext-toolchain/bin/../lib/gcc/microblazeel-buildroot-linux-uclibc/9.3.0/../../../../microblazeel-buildroot-linux-uclibc/bin/ld: /tmp/instance-7/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/lib/libnuma.a(libnuma.o): in function `numa_node_to_cpus_v1':
(.text+0x2a80): undefined reference to `__atomic_fetch_and_1'
/tmp/instance-7/output-1/host/opt/ext-toolchain/bin/../lib/gcc/microblazeel-buildroot-linux-uclibc/9.3.0/../../../../microblazeel-buildroot-linux-uclibc/bin/ld: /tmp/instance-7/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/lib/libnuma.a(libnuma.o): in function `numa_node_to_cpus_v2':
(.text+0x2ddc): undefined reference to `__atomic_fetch_and_1'
collect2: error: ld returned 1 exit status
Fixes:
- http://autobuild.buildroot.org/results/577a63432fba2f9ae1ed2c6c2a77c5ce54ac5521
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
GCC 11 defaults to C++17. Fix the following build failure with gcc 11:
In file included from details/shared-ptr/base.cxx:5:
../odb/details/shared-ptr/base.hxx:38:49: error: ISO C++17 does not allow dynamic exception specifications
38 | operator new (std::size_t, odb::details::share) throw (std::bad_alloc);
| ^~~~~
Fixes:
- http://autobuild.buildroot.org/results/cfd5f92f0aa923815edba5fbfcd5b7b312d9d40e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When Bluetooth support is enabled ensure to enable the Audio and
HID plugins.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When BlueZ is enabled ensure to select the BlueZ HID Plugin for wiimote support.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When BlueZ is enabled ensure to select the BlueZ Audio Plugins.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When BlueZ is enabled ensure to select the BlueZ Audio Plugins.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When enabling the BlueZ plugin select the BlueZ Audio Plugins.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
brltty builds with bluetooth support when bluez is enabled.
Ensure the HID Plugin is enabled.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The A2DP/AVCRP plugins now have to be explicitly selected.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
the HID plugin now needs to be explictly enabled.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
as discussed on the mailinglist this drops the default y
entry for the now optional plugins and tools.
This might break backward compatibility but gives new users
a smaller initial footprint.
Further add a select for the options that required the HID
plugin at runtime.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The tools are currently always build and installed. In many cases
those tools are not needed in a production system. So make this
step optional. This saves up to 2MB on the target.
Further tweak the deprecated option. It has effects when the --enable-tools
is set as well as when --enable-client is set. So explain this in the
options description and update the install step for gatttool to only be
added when client is enabled.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since the bump to version 2.0.8 in commit
f5906644b4, bird uses a home-grown "GNU Autoconf
2.69e" instead of standard autoconf 2.69 to generate the configure
script. This fork seems to generate incorrect code: it uses
ac_test_CFLAGS=${CFLAGS+y}
to remember if CFLAGS was saved, while standard autoconf uses
ac_test_CFLAGS=${CFLAGS+set}
The configure.ac code itself, however, uses
if test "$ac_test_CFLAGS" != set ; then
to check if CFLAGS was overridden.
Thus, Buildroot's CFLAGS are not taken into account and this leads to
the following build failure:
checking for glob.h... no
configure: error: glob.h not found.
This build failure is raised because -g0 and -g are both passed to gcc:
configure:5207: checking for glob.h
configure:5230: /data/buildroot-autobuilder/instance-0/output-1/host/bin/mips64el-linux-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -pthread -fno-strict-aliasing -fno-strict-overflow -flto -Wall -Wextra -Wstrict-prototypes -Wno-parentheses -Wno-pointer-sign -Wno-missing-field-initializers -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pthread -flto=4 -g conftest.c >&5
/data/buildroot-autobuilder/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/mips64el-buildroot-linux-uclibc/8.4.0/../../../../mips64el-buildroot-linux-uclibc/bin/ld: /tmp/ccDboxph.ltrans0.ltrans.o:(.debug_info+0x2a): undefined reference to `conftest.c.0943dc99'
/data/buildroot-autobuilder/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/mips64el-buildroot-linux-uclibc/8.4.0/../../../../mips64el-buildroot-linux-uclibc/bin/ld: /tmp/ccDboxph.ltrans0.ltrans.o:(.debug_info+0x2f): undefined reference to `conftest.c.0943dc99'
-g0 is passed by buildroot and -g is passed by bird if
$ac_test_CFLAGS" != set (since version 2.0.7 and
https://gitlab.nic.cz/labs/bird/-/commit/cc95b4594ac924b40325a4f1adcae5312179db40)
To fix this, we can simply run autoreconf and generate a correct
configure script.
Fixes:
- http://autobuild.buildroot.org/results/1d2acc9f6b8830adc8b62d6b2e55837abae561a9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that we have 2.35, 2.36 and 2.37, with 2.36 as the default, we can
remove 2.34.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that we have added version 2.37, it's time to use the 2.36.x
series as the default version.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Arnout: also update default in binutils.mk]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
State of the patches:
- 0001-sh-conf.patch
Refreshed
- 0002-poison-system-directories.patch
Refreshed, but needed some adaptations as the bfd_boolean type no
longer exists, and the standard "bool" type is now used instead.
- 0003-or1k-Fix-issue-with-plt-link-failure-for-local-calls.patch
Drop, present in 2.37, merged upstream as
a76ef689b60405e494cb99e198acf3c82f467f7d
- 0004-or1k-Implement-relocation-R_OR1K_GOT_AHI16-for-gotha.patch
Drop, present in 2.37, merged upstream as
0b3e14c90283c5d234884d0ebe8510bc3c9bc687
- 0005-or1k-Avoid-R_OR1K_GOT16-overflow-failures-in-presenc.patch
Drop, present in 2.37, merged upstream as
3c3de29b048bca6b4aa4235c647b9328e71801b6
- 0006-or1k-Support-large-plt_relocs-when-generating-plt-en.patch
Drop, present in 2.37, merged upstream as
284a1309021a0ef4c29f198470d95652f02b13f0
- 0007-bfd-elf32-or1k-fix-building-with-gcc-version-5.patch
Refreshed
- 0008-or1k-fix-pc-relative-relocation-against-dynamic-on-P.patch
Refreshed
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Support for wireguard-tools is added by the services/wireguard module in
the SELinux refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for squid is added by the services/squid module in the SELinux
refpolicy.
Moreover, add apache module as for now it is unconditionally used in
squid.fc
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for tftpd is added by the services/tftp module in the SELinux
refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Support for proftpd is added by the services/ftp module in the SELinux
refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Support for vsftpd is added by the services/ftp module in the SELinux
refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Support for samba4 is added by the services/samba module in the SELinux
refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Set DEBUG_FLAGS and RELEASE_FLAGS to an empty value to remove -Werror
and fix the following build failure with gcc 11:
/tmp/instance-5/output-1/build/openzwave-62444b0f979c337d2091d77d89cf63c2ae9775cf/cpp/src/command_classes/AssociationCommandConfiguration.cpp: In member function 'virtual bool OpenZWave::Internal::CC::AssociationCommandConfiguration::HandleMsg(const uint8*, uint32, uint32)':
/tmp/instance-5/output-1/build/openzwave-62444b0f979c337d2091d77d89cf63c2ae9775cf/cpp/src/command_classes/AssociationCommandConfiguration.cpp:191:85: error: 'this' pointer is null [-Werror=nonnull]
191 | group->ClearCommands(nodeIdx);
| ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/05ad5cc1f593704ef032f3c5278695247450b94b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure with gcc 11:
In file included from Source/FreeImage/../OpenEXR/IlmImf/ImfHeader.h:51,
from Source/FreeImage/../OpenEXR/IlmImf/ImfOutputFile.h:46,
from Source/FreeImage/PluginEXR.cpp:33:
Source/OpenEXR/Imath/ImathVec.h:228:41: error: ISO C++17 does not allow dynamic exception specifications
228 | const Vec2 & normalizeExc () throw (IEX_NAMESPACE::MathExc);
| ^~~~~
Fixes:
- http://autobuild.buildroot.org/results/953cd07402fe2f99f2361a3b4a7b086a88e0d72d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure with gcc 11:
In file included from ../include/loki/SmartPtr.h:33,
from SmartPtr.cpp:20:
../include/loki/SmallObj.h: At global scope:
../include/loki/SmallObj.h:462:57: error: ISO C++17 does not allow dynamic exception specifications
462 | static void * operator new ( std::size_t size ) throw ( std::bad_alloc )
|
Fixes:
- http://autobuild.buildroot.org/results/768727160beaca5df3ef18be29cfbaa3ced67ad5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
rtl_433 (despite the name) is a generic data receiver, mainly for the
433.92 MHz, 868 MHz (SRD), 315 MHz, 345 MHz, and 915 MHz ISM bands.
https://github.com/merbanan/rtl_433
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: forcibly disable building docs and tests]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- [High] OCSP verification issue when response is for a certificate with
no relation to the chain in question BUT that response contains the
NoCheck extension which effectively disables ALL verification of that
one cert.
- [Low] OCSP request/response verification issue. In the case that the
serial number in the OCSP request differs from the serial number in
the OCSP response the error from the comparison was not resulting in a
failed verification.
- [Low] CVE-2021-24116: Side-Channel cache look up vulnerability in
base64 PEM decoding for versions of wolfSSL 4.5.0 and earlier.
Versions 4.6.0 and up contain a fix and do not need to be updated for
this report.
https://github.com/wolfSSL/wolfssl/blob/v4.8.1-stable/ChangeLog.md
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Support for vnstat is added by the services/vnstatd module in the
SELinux refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Support for quagga is added by the services/zebra module in the SELinux
refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Support for postgresql is added by the services/postgresql module in the
SELinux refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Support for ulogd is added by the services/ulogd module in the SELinux
refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Support for smstools3 is added by the services/smstools module in the
SELinux refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Support for smartmontools is added by the services/smartmon module in
the SELinux refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Support for rsync is added by the services/rsync module in the SELinux
refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Support for rpcbind is added by the services/rpcbind module in the
SELinux refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This package has some udev tools to assist with printer autodetection.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr:
- add missing dependency to host-pkgconf
- add patch for --with-cups-config
- use that to point to cups-config in staging
- append-assign in conditional blocks
- license to be GPL-2.0-or-later (not GPL-2.0-only)
- fix check-package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 9dfbbbb410 wrongly removed
dependency on host-python3 or host-python resulting in the following
build failure:
cp -rp /tmp/instance-2/output-1/build/host-gtest-1.11.0/googlemock/scripts/generator/cpp /tmp/instance-2/output-1/per-package/host-gtest/host/lib/python2.7/site-packages
cp: cannot create directory '/tmp/instance-2/output-1/per-package/host-gtest/host/lib/python2.7/site-packages': No such file or directory
Fixes:
- http://autobuild.buildroot.org/results/a1d2e100a65d7c1c39c20bdd5bf687a804c94305
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for rabbitmq-server is added by the services/rabbitmq module in
the SELinux refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with gcc 11:
In file included from ../../ibrdtn/data/PrimaryBlock.h:30,
from ../../ibrdtn/data/Serializer.h:27,
from ../../ibrdtn/data/Block.h:29,
from ../../ibrdtn/data/Bundle.h:27,
from ../../ibrdtn/api/Client.h:26,
from Client.cpp:22:
/tmp/instance-0/output-1/host/bin/../arm-buildroot-linux-gnueabihf/sysroot/usr/include/ibrcommon-1.0/ibrcommon/thread/Mutex.h:43:40: error: ISO C++17 does not allow dynamic exception specifications
43 | virtual void trylock() throw (MutexException) = 0;
| ^~~~~
Fixes:
- http://autobuild.buildroot.org/results/c2d9033c68b5c1407d2cf87b98dff61958b8e7b6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with gcc 11:
In file included from dumapp.cpp:39:
dumapp.h:88:49: error: ISO C++17 does not allow dynamic exception specifications
88 | void * DUMA_CDECL operator new(DUMA_SIZE_T) throw(std::bad_alloc);
| ^~~~~
While at it, also drop DUMA_CPP which does not seem to be set since the
addition of the package back in 2013 in commit
bda69bf4e4
Fixes:
- http://autobuild.buildroot.org/results/ed838a55f09841a643b05e5a7a7ca0a9d2882acd
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
01.org url is permission denied. There seems to be no project page
anymore. Use kernel.org repo with cleaner https url.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the update of gpsd to 3.21, olsr was failing to build with:
src/gpsdclient.c: In function 'nmeaInfoFromGpsd':
src/gpsdclient.c:373:14: error: 'struct gps_data_t' has no member named 'status'
373 | if (gpsdata->status == STATUS_NO_FIX) {
| ^~
This is due to an API change in gpsd. This commit fixes that by
backporting an upstream commit from olsr.
Fixes:
http://autobuild.buildroot.net/results/d8c5564b24ff5b646cdd786d07b3a45ce5fa01ea/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The foo-update-config and foo-update-defconfig targets only work if a
custom config file was defined. Remove those targets entirely if they
don't work to begin with.
This was originally handled with an error condition in the
kconfig-package-update-config macro. However, it makes more sense to
simply remove the target if it anyway can't be used.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr: move PHONY before corresponding rule]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When the savedefconfig target is not supported by a kconfig package,
(like is the case for busybox) it doesn't make sense to define
busybox-savedefconfig or busybox-update-defconfig. Calling these leads
to an error from busybox itself "No rule to make target
'savedefconfig'.", which may be confusing.
Only define the savedefconfig and update-defconfig target if
$(2)_KCONFIG_SUPPORTS_DEFCONFIG is YES.
Note that we also need to define it as phony in the condition, otherwise
'make busybox-update-defconfig' will just say "Nothing to be done" and
we really want the error "No rule to make target
'busybox-update-defconfig'".
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr: move PHONY before corresponding rule]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add apache module as for now it is unconditionally used in apcupsd.fc to
fix build failure raised since dc8b2905f1
Fixes:
- No autobuilder failures yet
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
These minor releases include a security fix according to the new security policy (#44918).
crypto/tls clients can panic when provided a certificate of the wrong type for the negotiated parameters.
net/http clients performing HTTPS requests are also affected. The panic can be triggered by an attacker
in a privileged network position without access to the server certificate's private key, as long as a trusted
ECDSA or Ed25519 certificate for the server exists (or can be issued), or the client is configured with
Config.InsecureSkipVerify. Clients that disable all TLS_RSA cipher suites (that is, TLS 1.0–1.2 cipher
suites without ECDHE), as well as TLS 1.3-only clients, are unaffected.
This is CVE-2021-34558.
View the release notes for more information:
https://golang.org/doc/devel/release.html#go1.16.minor
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Build is broken since commit f043646044
because services/mta module is mandatory with fetchmail
Fixes:
- No autobuilder failures yet
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
fail2ban is a daemon to ban hosts that cause multiple authentication
errors. In versions 0.9.7 and prior, 0.10.0 through 0.10.6, and 0.11.0
through 0.11.2, there is a vulnerability that leads to possible remote
code execution in the mailing action mail-whois. Command `mail` from
mailutils package used in mail actions like `mail-whois` can execute
command if unescaped sequences (`\n~`) are available in "foreign" input
(for instance in whois output). To exploit the vulnerability, an
attacker would need to insert malicious characters into the response
sent by the whois server, either via a MITM attack or by taking over a
whois server. The issue is patched in versions 0.10.7 and 0.11.3. As a
workaround, one may avoid the usage of action `mail-whois` or patch the
vulnerability manually.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
SDL2 autotools-provided sdl2-config.cmake uses the absolute /usr prefix.
For this reason, we previously removed it (as of d59261836a).
This commit fixes sdl2-config.cmake to use relative paths instead.
Signed-off-by: Gleb Mazovetskiy <glex.spb@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Change from makefile to makefile.unix:
- brings pkgconfig support (libtomcrypt.pc will be installed)
- remove NODOCS (legacy, not used anymore)
- remove INSTALL_USER/INSTALL_GROUP (not needed for makefile.unix)
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While Erlang will use it's own atomic operations, it can also use gcc
__atomic_* builtins. This is now listed in Erlang's HOWTO/INSTALL.md.
This change was necessary on RISC-V, since Erlang didn't have a built-in
implementation, but it was able to use gcc's __atomic_* functions.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
osm2pgsql is a tool for loading OpenStreetMap data into a
PostgreSQL / PostGIS database suitable for applications like
rendering into a map, geocoding with Nominatim, or general analysis.
https://osm2pgsql.org
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following static build failure with nginx raised since bump of
libmodsecurity to version 3.0.5 in commit
464d0be380:
/home/buildroot/autobuild/instance-2/output-1/host/lib/gcc/xtensa-buildroot-linux-uclibc/10.3.0/../../../../xtensa-buildroot-linux-uclibc/bin/ld: /home/buildroot/autobuild/instance-2/output-1/host/bin/../xtensa-buildroot-linux-uclibc/sysroot/usr/lib/libmodsecurity.a(libmodsecurity_la-transaction.o): in function `std::basic_streambuf<char, std::char_traits<char> >::sbumpc() [clone .isra.0]':
transaction.cc:(.text+0x40): undefined reference to `std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::_M_dispose()'
Fixes:
- http://autobuild.buildroot.org/results/e5a9eb8448980f1c5cafe97180b7d1f48ddf02ca
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Starting with nmap 7.91, ncat segfaults on an attempt to use it for a
Unix-domain socket (`ncat -U path`). The fix has been committed to nmap
in r38121.
Signed-off-by: Alexey Neyman <stilor@att.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add option that enables gpsd python support including modules, tools,
and gpsfake test harness. If python is enabled then install python
modules unconditionally. Note that gpsd python modules run compatibly
under Python 2 and 3.x for x >= 2. So enable gpsd python support when
any Python version is enabled in board configuration. If no Python is
enabled, but gpsd Python support is requested, then select Python 3.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[yann.morin.1998@free.fr: fix check-package]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update gpsd to latest release v3.21:
- bump version
- update checksums
- remove patch for v3.20: it is not needed for v3.21
- remove obsolete options and add them to Config.in.legacy
Signed-off-by: Olivier Dautricourt <olivier.dautricourt@orolia.com>
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We need to backport an aarch64 patch to prevent a crash.
Fixes:
==654== Conditional jump or move depends on uninitialised value(s)
==654== at 0x68CF9D0: contains (Range.h:115)
==654== by 0x68CF9D0: mark (JITStubRoutineSet.h:57)
==654== by 0x68CF9D0: mark (ConservativeRoots.cpp:127)
==654== by 0x68CF9D0: genericAddPointer<JSC::CompositeMarkHook> (ConservativeRoots.cpp:69)
==654== by 0x68CF9D0: genericAddSpan<JSC::CompositeMarkHook> (ConservativeRoots.cpp:101)
==654== by 0x68CF9D0: JSC::ConservativeRoots::add(void*, void*, JSC::JITStubRoutineSet&, JSC::CodeBlockSet&) (ConservativeRoots.cpp:147)
==654== by 0x68EA5BB: JSC::MachineThreads::gatherConservativeRoots(JSC::ConservativeRoots&, JSC::JITStubRoutineSet&, JSC::CodeBlockSet&, JSC::CurrentThreadState*, WTF::Thread*) (MachineStackMarker.cpp:202)
==654== by 0x68D885B: _ZZN3JSC4Heap18addCoreConstraintsEvENUlRT_E0_clINS_11SlotVisitorEEEDaS2_ (Heap.cpp:2740)
==654== by 0x68EFF7B: JSC::MarkingConstraint::execute(JSC::SlotVisitor&) (MarkingConstraint.cpp:58)
==654== by 0x68F3D83: JSC::MarkingConstraintSolver::runExecutionThread(JSC::SlotVisitor&, JSC::MarkingConstraintSolver::SchedulerPreference, WTF::ScopedLambda<WTF::Optional<unsigned int> ()>) (MarkingConstraintSolver.cpp:237)
==654== by 0x68D4413: JSC::Heap::runTaskInParallel(WTF::RefPtr<WTF::SharedTask<void (JSC::SlotVisitor&)>, WTF::RawPtrTraits<WTF::SharedTask<void (JSC::SlotVisitor&)> >, WTF::DefaultRefDerefTraits<WTF::SharedTask<void (JSC::SlotVisitor&)> > >) (Heap.cpp:3061)
==654== by 0x68F3E9F: runFunctionInParallel<JSC::MarkingConstraintSolver::execute(JSC::MarkingConstraintSolver::SchedulerPreference, WTF::ScopedLambda<WTF::Optional<unsigned int>()>)::<lambda(JSC::SlotVisitor&)> > (Heap.h:397)
==654== by 0x68F3E9F: JSC::MarkingConstraintSolver::execute(JSC::MarkingConstraintSolver::SchedulerPreference, WTF::ScopedLambda<WTF::Optional<unsigned int> ()>) (MarkingConstraintSolver.cpp:66)
==654== by 0x68F4033: JSC::MarkingConstraintSolver::drain(WTF::BitVector&) (MarkingConstraintSolver.cpp:97)
==654== by 0x68F4B2F: JSC::MarkingConstraintSet::executeConvergenceImpl(JSC::SlotVisitor&) (MarkingConstraintSet.cpp:114)
==654== by 0x68F4C6B: JSC::MarkingConstraintSet::executeConvergence(JSC::SlotVisitor&) (MarkingConstraintSet.cpp:83)
==654== by 0x68D9BC7: JSC::Heap::runFixpointPhase(JSC::GCConductor) (Heap.cpp:1378)
==654== by 0x68D9E93: runCurrentPhase (Heap.cpp:1208)
==654== by 0x68D9E93: JSC::Heap::runCurrentPhase(JSC::GCConductor, JSC::CurrentThreadState*) (Heap.cpp:1176)
==654== Uninitialised value was created by a stack allocation
==654== at 0x5AC3E80: JSC::ARM64Assembler::linkJump(JSC::AssemblerLabel, JSC::AssemblerLabel, JSC::ARM64Assembler::JumpType, JSC::ARM64Assembler::Condition) [clone .isra.0] (ARM64Assembler.h:2556)
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Acked-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with nios2 raised since bump to version
1.2.2 in commit b436b82411:
/home/buildroot/autobuild/instance-1/output-1/build/open62541-v1.2.2/src/ua_types_encoding_binary.c: In function 'unpack754':
/home/buildroot/autobuild/instance-1/output-1/build/open62541-v1.2.2/src/ua_types_encoding_binary.c:322:12: error: conversion to 'long double' from 'long long int' may alter its value [-Werror=conversion]
result /= (1LL<<significandbits);
^~
Fixes:
- http://autobuild.buildroot.org/results/c0a33dbada549c480bc741c1c8177b788ff053db
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Build of avrcp without a2dp is broken since commit
fb9fc969d9:
/home/buildroot/autobuild/run/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-buildroot-linux-uclibc/9.3.0/../../../../x86_64-buildroot-linux-uclibc/bin/ld: profiles/audio/bluetoothd-avrcp.o: in function `avrcp_handle_set_volume':
avrcp.c:(.text+0x9c4): undefined reference to `media_transport_update_device_volume'
However, build of a2dp without avrcp is also broken:
/data/buildroot-autobuilder/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/riscv32-buildroot-linux-gnu/10.2.0/../../../../riscv32-buildroot-linux-gnu/bin/ld: profiles/audio/bluetoothd-media.o: in function `.L50':
media.c:(.text+0x508): undefined reference to `avrcp_unregister_player'
/data/buildroot-autobuilder/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/riscv32-buildroot-linux-gnu/10.2.0/../../../../riscv32-buildroot-linux-gnu/bin/ld: profiles/audio/bluetoothd-media.o: in function `match_endpoint_by_path':
media.c:(.text+0x824): undefined reference to `avrcp_register_player'
Fixes:
- http://autobuild.buildroot.org/results/d54cdfc03212fff772a863d1bc8afd3cfb605831
- http://autobuild.buildroot.org/results/64d75af986a4d6e9c5a176efb6e22046f4d82350
So make a single audio option for a2dp and avrcp
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit e43c050944 introduced two flake8
errors:
utils/scanpypi:300:26: E231 missing whitespace after ','
utils/scanpypi:302:9: F841 local variable 'setup' is assigned to but never used
The first one is easily fixed. The second one needs a little bit of
explanation. Before commit e43c0509, the return value of
imp.load_module() was used to be able to explicitly call the 'setup'
function in it in case the metadata was not populated. Since that
commit, calling that function is no longer needed, since setup.py is
executed in exactly the same way as when it's run from the command line,
so if that doesn't work, it's completely broken anyway. Therefore, we
can simply discard the return value of imp.load_module().
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The rootfses, unlike packages, do not have stampfiles to represent
whether they are built or not. Indeed, we always rebuild the rootfs, and
there is a single step to do.
Hpwever, people (and scripts) who want to report on the build progress,
will want to know whether each rootfs has been built already or not.
Expose in show-info the name of the file that wil contain the rootfs
image.
$(1)_FINAL_IMAGE_NAME is set by the fs infrastructure, but initramfs
doesn't use the infrastructure. So to support that one as well, set
image_name to null if $(1)_FINAL_IMAGE_NAME is not set.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: eeppeliteloop@gmail.com
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Change sources location from bintray to github since bintray doesn't
work anymore.
Use commit hash for version instead of git tag to avoid breaking
existing source caches.
Signed-off-by: Daniil Stas <daniil.stas@posteo.net>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bug has been fixed upstream and backported to buildroot binutils
package. So let's remove it from toolchain/Config.in and from packages
that are affected by it:
- libgeos
- postgis
- protobuf
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
clapack has been unmaintained for a couple of years. It is
semi-automatically generated from lapack sources using the f2c
fortran-to-C converter, which itself is pretty much unmaintained.
Remove the package. Remove the dependency on !CLAPACK from lapack.
Automatically select lapack from legacy if possible.
Cc: Alexandre PAYEN <alexandre.payen@smile.fr>
Cc: Benjamin Kamath <kamath.ben@gmail.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BlueZ builds a lot of Classic BT profiles by default but allows
to disable them. This is especially handy when only BLE is needed
and enabled in the kernel.
Otherwise this yields warnings like this on bootup:
profiles/network/bnep.c:bnep_init() kernel lacks bnep-protocol support
src/plugin.c:plugin_init() System does not support network plugin
Also it allows to disable btmon which should not be needed on
production systems and is ~800KB in size.
Expose those options but default to 'y' to no break existing
configurations.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
From the release notes:
================================================================================
Redis 6.2.5 Released Wed Jul 21 16:32:19 IDT 2021
================================================================================
Upgrade urgency: SECURITY, contains fixes to security issues that affect
authenticated client connections on 32-bit versions. MODERATE otherwise.
Fix integer overflow in BITFIELD on 32-bit versions (CVE-2021-32761).
An integer overflow bug in Redis version 2.2 or newer can be exploited using the
BITFIELD command to corrupt the heap and potentially result with remote code
execution.
See https://github.com/redis/redis/blob/6.2.5/00-RELEASENOTES
Signed-off-by: Titouan Christophe <titouanchristophe@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for modem-manager is added by the services/modemmanager module
in the SELinux refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In case the setup.py file of a python package does not directly call the
'setup' method, utils/scanpypi was hoping there be a 'main' function which
would do the work, normally called via a construct like:
if __name__ == '__main__':
main()
However, this construct is nonstandard, and there are packages in PyPI which
call 'setup()' directly from the 'if' statement, without a main() method.
But scanpypi does not actually need to make such assumption: when loading
the module, it can decide the name to be '__main__', just as if setup.py
would be loaded interactively.
Additionally, remove some logic seemingly related to the previous trick of
calling 'main'. There should not be a problem in keeping already loaded
modules in sys.modules, as this is the purpose of sys.modules.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Even though the directory containing a package's setup.py was added to
sys.path, some setup.py implementations rely on the fact that it is placed
in sys.path[0].
An example package is 'cram' which failed to be added with scanpypi:
Traceback (most recent call last):
File "utils/scanpypi", line 756, in <module>
main()
File "utils/scanpypi", line 703, in main
package.load_setup()
File "utils/scanpypi", line 303, in load_setup
setup = imp.load_module('setup', s_file, s_path, s_desc)
File "/usr/lib/python3.8/imp.py", line 234, in load_module
return load_source(name, filename, file)
File "/usr/lib/python3.8/imp.py", line 171, in load_source
module = _load(spec)
File "<frozen importlib._bootstrap>", line 702, in _load
File "<frozen importlib._bootstrap>", line 671, in _load_unlocked
File "<frozen importlib._bootstrap_external>", line 783, in exec_module
File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
File "/tmp/scanpypi-2pzc5wb_/python-cram/cram-0.7/setup.py", line 44, in <module>
long_description=long_description(),
File "/tmp/scanpypi-2pzc5wb_/python-cram/cram-0.7/setup.py", line 20, in long_description
return open(os.path.join(sys.path[0], 'README.rst')).read()
FileNotFoundError: [Errno 2] No such file or directory: '.../buildroot/utils/README.rst'
The corresponding code from cram's setup.py is:
def long_description():
"""Get the long description from the README"""
return open(os.path.join(sys.path[0], 'README.rst')).read()
Indeed, the Python documentation says:
https://docs.python.org/3.8/library/sys.html#sys.path
"...
As initialized upon program startup, the first item of this list,
path[0], is the directory containing the script that was used to invoke
the Python interpreter.
..."
Fix this by inserting explicitly at index 0 instead of appending to
sys.path.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- change clock_gettime option from yes/no style to disable/enable one
(still omitting the explicit disable to keep the configure logic
defaulting to yes in case no rdtsc is available)
- change to set all available configure options:
* '--enable-daemon': previous default
* '--disable-diagnostic': previous default
* '-disable-init': do not install init files as buildroot ships its
own sysv/systemd init files
* '--disable-nistest': disable tests, previous default
* '--disable-enttest': new option, disable tests
* '--disable-olt': previous default was yes, disable builtin test
* '--enable-tune': previous default
- add patch to fix uclibc compile (disable dependency on sys/auxv.h
introduced with upstream commit [1])
Changelog ([2]):
- made enttest configurable
- havegecmd.c - new command added to close the communication socket
[Werner Fink]
[1] https://github.com/jirka-h/haveged/commit/26d35af198da01220ba4f7a1b987f17012476c00
[2] https://github.com/jirka-h/haveged/releases/tag/v1.9.14
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- add patch for qv4regexp_p to include c++ limits include (instead of plain
c limit.h)
Fixes:
In file included from jsruntime/qv4regexp_p.h:62,
from jsruntime/qv4regexp.cpp:40:
../3rdparty/masm/yarr/Yarr.h:46:44: error: ‘numeric_limits’ is not a member of ‘std’
46 | static const unsigned offsetNoMatch = std::numeric_limits<unsigned>::max();
| ^~~~~~~~~~~~~~
../3rdparty/masm/yarr/Yarr.h:46:59: error: expected primary-expression before ‘unsigned’
46 | static const unsigned offsetNoMatch = std::numeric_limits<unsigned>::max();
| ^~~~~~~~
- add patch for qqmlprofilerevent_p to include c++ limits include
Fixes:
In file included from qqmlprofilertypedevent_p.h:43,
from qqmlprofilertypedevent.cpp:40:
qqmlprofilerevent_p.h: In member function ‘void QQmlProfilerEvent::assignNumbers(const Container&)’:
qqmlprofilerevent_p.h:314:65: error: ‘numeric_limits’ is not a member of ‘std’
314 | static_cast<quint16>(numbers.size()) : std::numeric_limits<quint16>::max();
| ^~~~~~~~~~~~~~
qqmlprofilerevent_p.h:314:87: error: expected primary-expression before ‘>’ token
314 | static_cast<quint16>(numbers.size()) : std::numeric_limits<quint16>::max();
| ^
qqmlprofilerevent_p.h:314:90: error: ‘::max’ has not been declared; did you mean ‘std::max’?
314 | static_cast<quint16>(numbers.size()) : std::numeric_limits<quint16>::max();
| ^~~
| std::max
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
gdb can automatically load certain files as described in [1]. Such files
could install pretty-printers for complex data structures.
libstdcxx (C++ standard library) provided by gcc, is one example of a
library for which such auto-load file is available. But there are other
examples too, like libglib2.
However, gdb will only auto-load files if the file is located in one of the
locations treated as 'safe'. The Buildroot sysroot is not by default in that
list.
Provide a better debugging experience by adding the sysroot to the 'safe'
list, via the gdbinit file prepared by Buildroot.
[1] https://sourceware.org/gdb/onlinedocs/gdb/objfile_002dgdbdotext-file.html
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
gcc installs a libstdcxx-...so-gdb.py file that gdb will load automatically
when it loads libstdcxx.so, via the mechanism described at [1].
However, the auto-load file installed by gcc contains hardcoded paths
referring to the location where the (external) toolchain was built, which
are normally not available.
Fix up the paths in the load file so that the pretty printers can be loaded
automatically.
Note that gdb will only auto-load the file if its location is marked as
'safe'. A subsequent commit will take care of that.
Technically, there could be more than one load file, e.g. in lib and
usr/lib, so fix them all. This was for example observed in
BR2_TOOLCHAIN_EXTERNAL_ARM_AARCH64.
In a very specific case with a local custom toolchain, there were actually
two 'python' directories, which would break the sed command, so arbitrarily
limit to the first one encountered.
[1] https://sourceware.org/gdb/onlinedocs/gdb/objfile_002dgdbdotext-file.html
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When enabling Python 3 support in gdb < 10, gdb segfaults at startup.
The issue is was resolved by the following upstream gdb commit,
present since gdb 10.1:
commit c47bae859a5af0d95224d90000df0e529f7c5aa0
Author: Kevin Buettner <kevinb@redhat.com>
Date: Wed May 27 20:05:40 2020 -0700
Fix Python3.9 related runtime problems
[...]
This commit backports this fix to all relevant gdb versions supported
in Buildroot.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- overwrite cross-compiled mariadb_config executable (used from the
mysql_config script) by a native/host compiled one
Fixes (qt5base configure):
Trying source 0 (type mysqlConfig) of library mysql ...
+ .../host/aarch64-buildroot-linux-gnu/sysroot/usr/bin/mysql_config --version
> .../host/aarch64-buildroot-linux-gnu/sysroot/usr/bin/mysql_config: line 100: \
.../host/aarch64-buildroot-linux-gnu/sysroot/usr/bin/mariadb_config: cannot execute binary file: Exec format error
with
$ file host/aarch64-buildroot-linux-gnu/sysroot/usr/bin/mariadb_config
host/aarch64-buildroot-linux-gnu/sysroot/usr/bin/mariadb_config: ELF 64-bit LSB pie executable, ARM aarch64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-aarch64.so.1, for GNU/Linux 5.10.0, with debug_info, not stripped
Reported-by: Scott Bartolett <SBartolett@thorlabs.com>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Create a symlink for libglx.so and drop libnvidia-wfb.so (aka libwfb.so)
since all selectable xserver versions in Buildroot provide their own.
VDPAU libraries should be installed into /usr/lib/vdpau/
https://download.nvidia.com/XFree86/Linux-x86_64/390.67/README/installedcomponents.html
Also, allow specifying target subdirectory per library and respect it in
the install loop.
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Parallelizes locale generation based on `BR2_JLEVEL` setting.
Locale generation always runs during the finalize stage and can consume
a significant amount of time. Parallelizing it greatly reduces that time
on multi-core machines.
To parallelize it, we first invoke `localedef` for every locale in
parallel with the `--no-archive` option. This creates the intermediate
locale data instead of writing to the finally archive directly.
Then, we invoke `localedef` again once to create the archive from the
intermediate compiled locale data files.
We have to do it this way because `localedef` does not do any locking
when writing to the archive file, so calling it without `--no-archive`
concurrently could result in a corrupt archive file or an archive file
that is missing some locales.
While we're at it, make two additional improvements:
- Remove locale-archive before adding to it. Otherwise, repeated
applications of target-finalize will keep on growing the file.
- Sort the locales when creating locale-archive so its contents are
reproducible.
We use `find` to collect the installed locales rather than LOCALES. This
makes it possible for something else (skeleton, overlay, custom package)
to create and install additional locales and still have them added to
locale-archive.
Signed-off-by: Gleb Mazovetskiy <glex.spb@gmail.com>
[Arnout:
- Remove -j$(PARALLEL_JOBS), it's already part of $(MAKE)
- Remove HOST_DIR, TARGET_DIR, STAGING_DIR, they're already exported
- Extend commit message
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The nios2 architecture is already excluded from PIC/PIE due to issues,
and we're going to also exclude Microblaze, so let's introduce a
BR2_PIC_PIE_ARCH_SUPPORTS hidden boolean to facilitate adding this new
architecture exclusion.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit e6b3913cfc converted busybox to the generic kconfig help text
infrastructure, but set the wrong variable to flag that it doesn't
support defconfig files. Fix that.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some external packages call pg_config to determine the installed
PostgreSQL cflags_sl option. Add this output to Buildroots own
pg_config, so these packages correctly compile.
Default value is defined at src/template/linux as:
Extra CFLAGS for code that will go into a shared library
CFLAGS_SL="-fPIC"
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
python-paramiko has a dependency on C++ support, which was added in
commit 2d7b73cf75 in 2016.
When python-pysftp was added in commit
3b920487ba in 2020, this C++ dependency
was not propagated, even though python-pysftp selects python-paramiko.
This commit fixes this issue by propagating the dependency, which
fixes this warning:
WARNING: unmet direct dependencies detected for BR2_PACKAGE_PYTHON_PARAMIKO
Depends on [n]: (BR2_PACKAGE_PYTHON [=n] || BR2_PACKAGE_PYTHON3 [=y]) && BR2_PACKAGE_PYTHON3 [=y] && BR2_INSTALL_LIBSTDCPP [=n]
Selected by [y]:
- BR2_PACKAGE_PYTHON_PYSFTP [=y] && (BR2_PACKAGE_PYTHON [=n] || BR2_PACKAGE_PYTHON3 [=y]) && BR2_PACKAGE_PYTHON3 [=y]
That occurs with configuration with C++ disabled, but python-pysftp
enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As Thomas put it:
The <pkg>_HELP_CMDS variable allows packages using the
kconfig-package infrastructure to display their specific
targets related to the handling of their configuration.
However, it was not consistently used and handled by the
different packages.
So, this commit switches all the kconfig-based package to use the
generic help helper.
As a consequence:
- all kconfig packages now advetise their kconfig-related actions,
where some were previously missing: at91bootstrap3, linux-backports,
swupdate, xvisor;
- busybox advertises it does not support defconfig files;
- the 'foo-savedfconfig' action is no longer advertised: it is to be
considered an internal implementation detail.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, as Thomas pointed out [0], the help for kconfig packages is
not consistently used and handled by the different packages.
This commit introduces a generic help text for kconfig packages, that is
based on what the package declares:
- the list of kconfig editors it supports;
- whether it is possible to save back the configuration (impossible if
the package uses an in-tree defconfig file);
- whether the package actually supports (loading and saving) defconfig
files, by introducing a new variable a package can set if it does
not (only busybox is known to be in that case).
That new help helper is only used if the package does not already define
its own help, to be consistent with what we do for other _CMDS.
[0] http://lists.busybox.net/pipermail/buildroot/2021-July/313570.html
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, we define the default values for kconfig-specific variables
after we call into the generic package infrastructure.
So far, this was totally unconsequential, because there was no kconfig
variable that could influence the generic parts. But conversely, there
are generic variables that do influence the kconfig part (e.g. $(2)_DIR
that is used in some dependency definitions), but none that do influence
the kconfig variables.
However, we are going to add a new kconfig-related variable that will
have an impact on the generic parts, so we will want that kconfig
variable to be defined before calling into the generic infrastructure.
For consistency, move all the defaults before calling the generic infra.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Let's bump at to version 3.2.2 by:
- moving SITE to http://software.calhariz.com/at that is the official at
realease site while the actual(https://salsa.debian.org/debian/at)
doesn't provide consitent tarballs.
- rebasing 2 local patches(some some of them has not been accepted upstream
because of removing -g root -o root while installing, while other simply
has not been taken into account for 1 year.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This makes it easier for packages that depend on lapack to get
their dependencies correct.
The !uClibc dependency is also not sufficient: indeed, musl too does not
provide _fpu_control; only glibc does. This is the same situation as for
clapack. Add a comment about this, to mirror clapack.
Since the !glibc dependency only exists for PowerPC, treat it as
an architecture dependency.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr:
- fpu_control depends on glibc, not on !uclibc
- add or update comments accordingly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This makes it easier for packages that depend on clapack to get
their dependencies correct.
Since the glibc dependency only exists for PowerPC, treat it as
an architecture dependency.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This reverts commit 1ad3de2abd.
Indeed, the tarball changed, so its hash changed; this is going to
cause the traditional hash clash with the existing archive on s.b.o.
or on users machines...
Reported-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch replace matchpathcon calls in the auditd init script by
calls to selabel_lookup. Indeed, matchpathcon is now deprecated, and
this causes warning during the boot process.
Signed-off-by: José Pekkarinen <jose.pekkarinen@unikie.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that Spidermonkey is no longer required to build the polkit package, and
no other packages require Spidermonkey, and python2 is required to build the
package, it is safe to drop the package.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This test script tests polkit with and without systemd.
The Systemd test does the following:
- The brtest user attempts to restart the systemd-timesyncd service and is
denied.
- A systemd-timesyncd-restart.rules file provided by polkit-rules-test
is copied from /root/ to /etc/polkit-1/rules.d
- The brtest user attempts to restart the systemd-timesyncd service and should
now succeed.
The initd test does the following:
- The brtest user attempts to run the test application "hello-polkit" with the
command "pkexec hello-polkit" and is denied.
- A hello-polkit.rules file provided by polkit-rules-test is copied from /root/
to /etc/polkit-1/rules.d
- The brtest user attempts to re-run the test hello-polkit binary with
"pkexec hello-polkit" and succeeds.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Polkit source does not come with non-systemd init script. Add one that is
modeled after package/busybox/S01syslogd.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Unfortunately, as of commit 3e1d61868fa8bfc586099302e931433270e5d17d, polkit
requires mozjs >= 78, which means spidermonkey is too old. As such, this patch
is larger than usual.
Spidermonkey has a few major issues:
- The source directory after compilation is enormous (2.7G!)
- The shared library is 24MB stripped!
- It requires python2 to build, which is EOLed, and Buildroot is working
towards removing. See: https://elinux.org/Buildroot:Python2Packages
Instead of going through the arduous task of updating Spidermonkey, there is a
better solution: use duktape.
There has been a pending patch for over a year that incorporates duktape as an
optional backend for polkit found here:
https://gitlab.freedesktop.org/polkit/polkit/-/merge_requests/35
As Thomas Petazzoni put it:
"As I am subscribed to notifications on this merge request, I have been
following the intermittent discussions taking place on this topic.
And indeed, discussions have been sparse, and the polkit maintainer reaction
has not been very supportive. It even feels like they are trying to find
every possible argument or small issue not to merge the duktape integration."
Many people have come out to support using duktape, and many users, including
myself, have used polkit with duktape for as long as the above merge request has
been around without issues; merging in the above merge request is an acceptable
exception to the typical Buildroot package policies.
As Thomas also suggested, I have forked polkit on Github
(https://github.com/aduskett/polkit-duktape), with the above duktape
merge request applied, and a release made with the same tag as upstream (0.119).
I refrained from also adding 0001-make-netgroup-support-optional.patch as it is
outside of the scope of why the fork exists.
Changes:
- refactor 0001-make-netgroup-support-optional.patch to work with 0.119 and
duktape.
- Remove upstream incorporated 0002-jsauthority-memleak.patch
- Remove upstream 0003-polkit-0.116-pkttyagent-sigttou-bg-job.patch
- Remove any trace of spidermonkey from polkit, udisks, and systemd-polkit
- Add duktape as a dependency of polkit
- Change POLKIT_SITE to the above polkit-duktape GitHub repository.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Change sources location from bintray to github since bintray doesn't
work anymore
Signed-off-by: Daniil Stas <daniil.stas@posteo.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Python is removed as dependency.
gtest uses python for self-tests which are not run by buildroot,
and the remaining scripts are not used by the build, and aren't
maintained or supported.
Special handling for gtest-config and gmock-config is removed as well,
the CMake Buildsystem now does take care of those.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[Arnout: still install gmock_gen.py]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since bump to version 1.2.5.1 in
commit af19131543:
/home/buildroot/autobuild/run/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/9.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: ../src/.libs/libasound.a(control_symbols.o):(.data+0x4): undefined reference to `_snd_module_control_empty'
Fixes:
- http://autobuild.buildroot.org/results/a8fd791ba4c289cc4fc744a8ff9615bacd9558f3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We need to backport an aarch64 patch to prevent a crash.
Fixes:
==654== Conditional jump or move depends on uninitialised value(s)
==654== at 0x68CF9D0: contains (Range.h:115)
==654== by 0x68CF9D0: mark (JITStubRoutineSet.h:57)
==654== by 0x68CF9D0: mark (ConservativeRoots.cpp:127)
==654== by 0x68CF9D0: genericAddPointer<JSC::CompositeMarkHook> (ConservativeRoots.cpp:69)
==654== by 0x68CF9D0: genericAddSpan<JSC::CompositeMarkHook> (ConservativeRoots.cpp:101)
==654== by 0x68CF9D0: JSC::ConservativeRoots::add(void*, void*, JSC::JITStubRoutineSet&, JSC::CodeBlockSet&) (ConservativeRoots.cpp:147)
==654== by 0x68EA5BB: JSC::MachineThreads::gatherConservativeRoots(JSC::ConservativeRoots&, JSC::JITStubRoutineSet&, JSC::CodeBlockSet&, JSC::CurrentThreadState*, WTF::Thread*) (MachineStackMarker.cpp:202)
==654== by 0x68D885B: _ZZN3JSC4Heap18addCoreConstraintsEvENUlRT_E0_clINS_11SlotVisitorEEEDaS2_ (Heap.cpp:2740)
==654== by 0x68EFF7B: JSC::MarkingConstraint::execute(JSC::SlotVisitor&) (MarkingConstraint.cpp:58)
==654== by 0x68F3D83: JSC::MarkingConstraintSolver::runExecutionThread(JSC::SlotVisitor&, JSC::MarkingConstraintSolver::SchedulerPreference, WTF::ScopedLambda<WTF::Optional<unsigned int> ()>) (MarkingConstraintSolver.cpp:237)
==654== by 0x68D4413: JSC::Heap::runTaskInParallel(WTF::RefPtr<WTF::SharedTask<void (JSC::SlotVisitor&)>, WTF::RawPtrTraits<WTF::SharedTask<void (JSC::SlotVisitor&)> >, WTF::DefaultRefDerefTraits<WTF::SharedTask<void (JSC::SlotVisitor&)> > >) (Heap.cpp:3061)
==654== by 0x68F3E9F: runFunctionInParallel<JSC::MarkingConstraintSolver::execute(JSC::MarkingConstraintSolver::SchedulerPreference, WTF::ScopedLambda<WTF::Optional<unsigned int>()>)::<lambda(JSC::SlotVisitor&)> > (Heap.h:397)
==654== by 0x68F3E9F: JSC::MarkingConstraintSolver::execute(JSC::MarkingConstraintSolver::SchedulerPreference, WTF::ScopedLambda<WTF::Optional<unsigned int> ()>) (MarkingConstraintSolver.cpp:66)
==654== by 0x68F4033: JSC::MarkingConstraintSolver::drain(WTF::BitVector&) (MarkingConstraintSolver.cpp:97)
==654== by 0x68F4B2F: JSC::MarkingConstraintSet::executeConvergenceImpl(JSC::SlotVisitor&) (MarkingConstraintSet.cpp:114)
==654== by 0x68F4C6B: JSC::MarkingConstraintSet::executeConvergence(JSC::SlotVisitor&) (MarkingConstraintSet.cpp:83)
==654== by 0x68D9BC7: JSC::Heap::runFixpointPhase(JSC::GCConductor) (Heap.cpp:1378)
==654== by 0x68D9E93: runCurrentPhase (Heap.cpp:1208)
==654== by 0x68D9E93: JSC::Heap::runCurrentPhase(JSC::GCConductor, JSC::CurrentThreadState*) (Heap.cpp:1176)
==654== Uninitialised value was created by a stack allocation
==654== at 0x5AC3E80: JSC::ARM64Assembler::linkJump(JSC::AssemblerLabel, JSC::AssemblerLabel, JSC::ARM64Assembler::JumpType, JSC::ARM64Assembler::Condition) [clone .isra.0] (ARM64Assembler.h:2556)
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A flaw was found in mupdf 1.18.0. Double free of object during
linearization may lead to memory corruption and other potential
consequences.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes:
- http://autobuild.buildroot.net/results/24230242c15eb379d653c957a08621f8a1fac55e
ssl/qdtls_openssl.cpp: In member function ‘bool dtlsopenssl::DtlsState::initCtxAndConnection(QDtlsBasePrivate*)’:
ssl/qdtls_openssl.cpp:717:9: error: ‘q_SSL_set_psk_server_callback’ was not declared in this scope; did you mean ‘q_SSL_set_psk_use_session_callback’?
717 | q_SSL_set_psk_server_callback(newConnection.data(), dtlscallbacks::q_PSK_server_callback);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| q_SSL_set_psk_use_session_callback
ssl/qdtls_openssl.cpp:719:9: error: ‘q_SSL_set_psk_client_callback’ was not declared in this scope; did you mean ‘q_SSL_set_psk_use_session_callback’?
719 | q_SSL_set_psk_client_callback(newConnection.data(), dtlscallbacks::q_PSK_client_callback);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| q_SSL_set_psk_use_session_callback
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
diff in README:
- Copyright (c) 1997, 2000, 2002, 2013 Jay Rogers. All rights
+ Copyright (c) 1997, 2000, 2002, 2013, 2021 Jay Rogers. All rights
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
LICENSE was reformated, the copyright holder is unchanged:
This software is copyright (c) 2012 by John Scoles.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This release includes the following changes:
- Security bugfixes
OpenSSL DLLs updated to version 1.1.1k.
- New features
Client-side "protocol = ldap" support (thx to Bart Dopheide and Seth Grover).
- Bugfixes
The test suite fixed not to require external connectivity.
Fixed paths in generated manuals (thx to Tatsuki Makino).
Fixed configuration reload when compression is used.
Fixed compilation with early releases of OpenSSL 1.1.1.
Signed-off-by: Pierre-Jean Texier <texier.pj2@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to add lxc and qemu options for libvirt under the daemon
config option
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update to add the libvirtd daemon for libvirt
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
[Arnout: put all CONF_OPTS that depend on LIBVIRT_DAEMON together]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Libvirt is collection of software that provides a convenient way to
manage virtual machines and other virtualization functionality, such as
storage and network interface management. These software pieces include
an API library, a daemon (libvirtd), and a command line utility (virsh).
http://libvirt.org/
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
[Arnout:
- Re-introduce BR2_PACKAGE_LIBVIRT_ARCH_SUPPORTS
- Put all Config.in comments on one line
- Put the comment before the option itself (makes sure sub-option
indention is good)
- Remove spurious BR2_PACKAGE_NETCAT dependency
- Alphabetically order dependencies in Config.in
- Add select of libglib2
- Alphabetically order CONF_OPTS
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
rpcgen patches raise a build failure with host-libtirpc since commit
0a5a9741e0 because rpcgen is not provided
by modern glibc:
rpcgen -h -o tirpc/rpcsvc/crypt.h tirpc/rpcsvc/crypt.x
make[1]: rpcgen: No such file or directory
Those patches were added to build rpcbind back in 2012 with commit
18828103cd however they don't seem to be
needed anymore as rpcbind builds fine without them
So drop those patches and autoreconf as well as the host-nfs-utils
dependency from the target variant.
Fixes:
- http://autobuild.buildroot.org/results/6607cb9bec426b8c78e649484d5a149a1bf12a7f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changelog ([1], [2]):
- Build: fix bug: won't compile with --enable-libxml2, introduced with
Release 1.44 (December 2015).
- Build: update config.guess and config.sub so Configure can recognize
newer environments.
- Build: Fix link failure in several tools because they fail to link the
Curl library. Don't know how long this was broken.
- Build: Eliminate compiler warnings with GCC 6.3
- Code cleanups - trailing white space, compile warnings
- Abyss: fix bug: wild memory reference when server times out waiting for
request header. Introduced with Release 1.44 (December 2015).
[1] http://xmlrpc-c.sourceforge.net/change.html
[2] http://xmlrpc-c.sourceforge.net/change_advanced.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- change to SVN download (according to [1] only 1.51.x available
via Sourceforge download)
- remove 0001-use-correct-curl-config.patch
(upstream applied)
Changelog ([2], [3]):
- Build: Use 'curl-config' found at configure time, not at make time.
- Build: fix bug: ignores LDFLAGS_FOR_BUILD, LDFLAGS_PERSONAL, and
LDFLAGS_PTHREAD when building the build tool Gennmtab.
- Build: fix bug: won't compile with --enable-libxml2, introduced with
Release 1.44 (December 2015).
- Abyss: fix bug: wild memory reference when server times out waiting for
request header. Introduced with Release 1.44 (December 2015).
[1] http://xmlrpc-c.sourceforge.net/downloading.php
[2] http://xmlrpc-c.sourceforge.net/change.html
[3] http://xmlrpc-c.sourceforge.net/change_stable.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
See https://golang.org/doc/install/source#bootstrapFromSource
All Go compiler versions > 1.4.x (old) are written in Go, and require a existing
compiled Go version to use to build from source. Buildroot uses a 1.4.x version
in the "go-bootstrap" package to build a C-based Go compiler, and then uses that
compiler to build the main "host-go" compiler.
This commit updates to the latest 1.4.x go-bootstrap branch version recommended
in the documentation, which includes more compatibility fixes.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
gcc 11.1 is around, gcc 10.2 is the default version, so drop
8.4 in order to reduce the gcc choice.
For PowerPC SPE, introduce BR2_GCC_VERSION_POWERPC_SPE
to avoid removing defconfigs arcturus_ucp1020_defconfig,
freescale_p1025twr_defconfig and qemu_ppc_mpc8544ds_defconfig
that are still used by some users [1].
BR2_GCC_VERSION_POWERPC_SPE use the same gcc version (8.4), no
change expected.
[1] 96e80ad214
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Oleksandr Zhadan <oleks@arcturusnetworks.com>
Cc: Michael Durrant <mdurrant@ArcturusNetworks.com>
Cc: Matthew Weber <matthew.weber@collins.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
During testing of bluez-alsa in particular, there is no compilation
dependency - but, some configurations will request the load of a
particular plugin:
ALSA lib dlmisc.c:337:(snd_dlobj_cache_get0) \
Cannot open shared library libasound_module_rate_samplerate_best.so \
(/usr/lib/alsa-lib/libasound_module_rate_samplerate_best.so: \
cannot open shared object file: No such file or directory)
Adding in the alsa-plugins package allows to build build the
appropriate plugins.
Signed-off-by: Charles Hardin <ckhardin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This version bump is needed prior to the introduction of alsa-plugins
1.2.5.
As part of this bump, we drop 0002-dlmisc-the-snd_plugin_dir_set.patch
which was an upstream backport, and we introduce
0002-fix-build-with-disable-ucm.patch to fix the build of alsa-lib
when UCM support is disabled. This patch is also backported from
upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
In file included from ../gst-libs/gst/gl/gstglwindow.c:54:
../gst-libs/gst/gl/wayland/gstglwindow_wayland_egl.h:25:10: fatal error: xdg-shell-client-protocol.h: No such file or directory
25 | #include "xdg-shell-client-protocol.h"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Other changes:
- Change license to GPL-3.0 and BSD-3-Clause
- Change license file to LICENSE and naxsi_src/ext/libinjection/COPYING
- Update license hash's in nginx-naxsi.hash
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested with ./utils/test-pkg -p nginx -a on Fedora 34
45 builds, 6 skipped, 0 build failed, 0 legal-info failed
Other changes:
- Rebase needed patches.
- Update license hash due to year change.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The configure script uses pkg-config to detect the location of
tmpfiles.d but imposes an unspecified ordering dependency with systemd.
Instead of relying on systemd being built before cryptsetup, set the
directory path explcitly, and ensure it is not set when systemd-tmpfiles
is disabled.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Recent tarballs from PyPI use setuptools instead of distutils, so
change `PYTHON_PYMUPDF_SETUP_TYPE`.
They also include a license file, so include it and a hash for it.
This version also has a new dependency: freetype2.
PYTHON_PYMUPDF_REMOVE_PATHS is updated to take the new dependency into
account, but also the sed command are changed to delete include lines
instead of turning them into empty strings. Indeed, empty include
strings lead to using multiple `-I` flags which were not followed by
anything. Depending on the number of empty include strings (because
two successive `-I` "cancel" each other out), it would have failed to
compile.
Also, it turns out the patch version of python-pymupdf doesn't have to
match mupdf's version (e.g. python-pymupdf 1.18.14 is compatible with
mupdf 1.18.*) so while at it, remove the word "exactly" from the
comment.
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It turns out the patch version of python-pymupdf doesn't have to match
mupdf's version (i.e. python-pymupdf 1.18.14 is compatible with mupdf
1.18.*) so remove the word "exactly" from the comment.
mupdf now has a new dependency: gumbo-parser.
gumbo-parser is included when downloading the sources for mupdf, but
instead we use the version provided by Buildroot.
While at it, take the chance to (based on previous review comments):
- Fix indentation in the hash file (two spaces).
- Switch to using the ".xz" archive.
- Add a conditional on freeglut.
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gumbo is an implementation of the HTML5 parsing algorithm implemented
as a pure C99 library with no outside dependencies.
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Link with TARGET_NLS_LIBS if needed to avoid the following build
failure:
/home/buildroot/autobuild/run/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/xtensa-buildroot-linux-uclibc/9.3.0/../../../../xtensa-buildroot-linux-uclibc/bin/ld: lib/libgranite.so.5.4.0.p/meson-generated_Application.c.o: in function `_vala_array_free.constprop.0':
Application.c:(.text+0x340): undefined reference to `libintl_bindtextdomain'
Fixes:
- http://autobuild.buildroot.org/results/d754cb776a1e11031cef4e66d45619aad5c4575d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add rtl8812au-aircrack-ng (alternative to rtl8821au), recommended
e.g. for Alfa cards ([1]) and as opposed to rtl8821au does not crash
in case of configured for IBSS mode and supports iw set freq command in
monitor mode.
[1] https://docs.alfa.com.tw/Support/Linux/RTL8811AU
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- update hash of WHENCE file
- update BRCM_BCM43XX and BRCM_BCM43XXX entries (omitting the new ones with
spaces in the path name 'brcm/brcmfmac43430a0-sdio.ONDA-V80 PLUS.txt' and
'brcm/brcmfmac43455-sdio.MINIX-NEO Z83-4.txt') and convert to one
entry per line format (easier to parse and update)
- fix WHENCE evaluation for new link entries with spaces (otherwise
reports the following warning '/bin/sh: line 1: test: too many arguments'
and does not create the link), e.g.:
Link: brcm/brcmfmac43455-sdio.Raspberry\ Pi\ Foundation-Raspberry\ Pi\ 4\ Model\ B.txt -> brcmfmac43455-sdio.raspberrypi,4-model-b.txt
Link: brcm/brcmfmac43455-sdio.Raspberry\ Pi\ Foundation-Raspberry\ Pi\ Compute\ Module\ 4.txt -> brcmfmac43455-sdio.raspberrypi,4-model-b.txt
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove duplicated entries for brcmfmac4366b-pcie.bin and
brcmfmac4366c-pcie.bin (present since addition with
commit ca6e3f4b90)
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The default setting with miniuart-bt requires hciattach which is a
deprecated utility in BlueZ. Setting the krnbt parameter switches to
the modern method of using serdev in the kernel removing the need for
any userspace configuration to enable the Bluetooth controller.
This is documented as applying to all Raspberry Pi variants so just
enable it globally.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The overriden service files appear to have compatibility issues
with upstream rpcbind, don't replace the bundled service files.
We need to build with --enable-warmstarts as this is required
by the systemd service files.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove 0001-Move-README-to-reStructured-text.patch
since it has been merged upstream.
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump OP-TEE Client package version to OP-TEE release 3.13.0.
Remove patch since addressed in that release.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump OP-TEE OS package version to OP-TEE release 3.13.0.
Add a patch already merged OP-TEE to fix build issue seen with 3.13.0
on some BR toolchain.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently mx6cubox uses a custom boot.scr.txt script
and custom image generation scripts: genimage.cfg, post-build.sh
and post-image.sh.
Switch to using the more standard extlinux.conf solution
and remove the custom scripts in favor of the standard
board/freescale/common/imx/post-image.sh one.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
a10_olinuxino is not switched to extlinux.conf, so the broken symlinks
are replaced by the previous content from a20_olinuxino.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The urlify feature in the systemd pager is only supported by the full
less package and not busybox less, enable only for builds with full
less support.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
imx7d-sdb has been converted to use disto boot in U-Boot.
Add extlinux.conf support so that the board can boot correctly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Pierre-Jean Texier <texier.pj2@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, only SPL is supported when BR2_LINUX_KERNEL_INSTALL_TARGET=y
is selected.
Support non-SPL case too.
This is needed for booting imx7d-sabresd, for example.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Pierre-Jean Texier <texier.pj2@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
V4L cx231xx devices need a firmware to be useful. So this patch adds
a submenu for V4L firmwares and an option for cx231xx devices.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This new attempt to maintain p7zip is already picked up by Distributions.
It fixes CVE-2016-9296, CVE-2017-17969, CVE-2018-5996 and CVE-2018-10115.
Signed-off-by: André Zwing <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This enables EROFS big pcluster images for buildroot.
Signed-off-by: Gao Xiang <hsiangkao@aol.com>
[yann.morin.1998@free.fr: must be a multiple of 4KiB]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently wandboard uses a custom boot.scr.txt script
and custom image generation scripts, genimage.cfg and
post-build.sh.
Switch to using the more standard extlinux.conf solution
and remove the custom scripts in favor of the standard
board/freescale/common/imx/post-image.sh one.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Only 0600 rights are allowed for the rules.conf. This file is read when the
usbguard daemon starts and will prevent it to run otherwise.
As Git only tracks the executable bit, setting the right permissions in the
package makefile is the cleanest solution, in particular when providing this
file from a rootfs overlay.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
comment message for gqrx is always displayed. This is due to an invert
dependency: GQRX depends on !BR2_STATIC_LIBS so comment must depends
on BR2_STATIC_LIBS.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Change download location to the project's page so that
we still can get *.tar.gz file instead of *.zip.
The LICENSE file has changed the copyright year from 2015
to 2020.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
usbguard doesn't build on musl because it uses GNU version of strerror_r
as well as basename resulting in the following build failure:
In file included from ./src/Library/public/usbguard/Rule.hpp:24,
from src/CLI/usbguard-rule-parser.cpp:23:
./src/Library/public/usbguard/Exception.hpp: In static member function 'static std::string usbguard::ErrnoException::reasonFromErrno(int)':
./src/Library/public/usbguard/Exception.hpp:129:72: error: no matching function for call to 'std::__cxx11::basic_string<char>::basic_string(int)'
129 | return std::string(strerror_r(errno_value, buffer, sizeof buffer));
|
Fixes:
- http://autobuild.buildroot.org/results/ac1fd7b8c7bd65c73a9213a40c5ed1c39204dab0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update patch
This will fix the following build failure with gssdp 1.2.3 which is
raised since commit 7a2f73e993:
FAILED: vala/gssdp-1.2.vapi
/home/buildroot/autobuild/run/instance-1/output-1/host/bin/vapigen --quiet --library=gssdp-1.2 --directory=/home/buildroot/autobuild/run/instance-1/output-1/build/gssdp-1.2.3/build/vala --pkg=gio-2.0 --pkg=libsoup-2.4 --metadatadir=/home/buildroot/autobuild/run/instance-1/output-1/build/gssdp-1.2.3/vala /home/buildroot/autobuild/run/instance-1/output-1/build/gssdp-1.2.3/build/libgssdp/GSSDP-1.2.gir
GSSDP-1.2.gir:1656.5-1656.29: error: unknown child element `docsection' in `namespace'
https://github.com/GNOME/vala/blob/0.52.4/NEWS
Fixes:
- http://autobuild.buildroot.org/results/e531029f75c8d6886f797b5bd01795d16f6848f3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add missing stdarg.h include for va_list/va_start/va_end.
Fixes:
- http://autobuild.buildroot.net/results/88f4ea971875b1a5eb88662326d9343341eaaea2
microtek.c: In function ‘MDBG_INIT’:
microtek.c:163:3: error: unknown type name ‘va_list’
163 | va_list ap;
| ^~~~~~~
microtek.c:78:1: note: ‘va_list’ is defined in header ‘<stdarg.h>’; did you forget to ‘#include <stdarg.h>’?
77 | #include "microtek.h"
+++ |+#include <stdarg.h>
78 |
microtek.c:164:3: warning: implicit declaration of function ‘va_start’; did you mean ‘sane_start’? [-Wimplicit-function-declaration]
164 | va_start(ap, format);
| ^~~~~~~~
| sane_start
microtek.c:165:54: warning: passing argument 4 of ‘vsnprintf’ makes pointer from integer without a cast [-Wint-conversion]
165 | vsnprintf(_mdebug_string, MAX_MDBG_LENGTH, format, ap);
| ^~
| |
| int
In file included from ../include/sane/sanei_config.h:50,
from microtek.c:70:
.../host/x86_64-buildroot-linux-uclibc/sysroot/usr/include/stdio.h:359:57: note: expected ‘__va_list_tag *’ but argument is of type ‘int’
359 | const char *__restrict __format, __gnuc_va_list __arg)
| ~~~~~~~~~~~~~~~^~~~~
microtek.c:166:3: warning: implicit declaration of function ‘va_end’ [-Wimplicit-function-declaration]
166 | va_end(ap);
| ^~~~~~
and
sm3600-scanutil.c: In function ‘debug_printf’:
sm3600-scanutil.c:69:3: error: unknown type name ‘va_list’
69 | va_list ap;
| ^~~~~~~
sm3600-scanutil.c:48:1: note: ‘va_list’ is defined in header ‘<stdarg.h>’; did you forget to ‘#include <stdarg.h>’?
47 | #include "sm3600-scantool.h"
+++ |+#include <stdarg.h>
48 |
sm3600-scanutil.c:75:3: warning: implicit declaration of function ‘va_start’; did you mean ‘sane_start’? [-Wimplicit-function-decla
ration]
75 | va_start(ap,szFormat);
| ^~~~~~~~
| sane_start
sm3600-scanutil.c:76:28: warning: passing argument 3 of ‘vfprintf’ makes pointer from integer without a cast [-Wint-conversion]
76 | vfprintf(stderr,szFormat,ap);
| ^~
| |
| int
In file included from ../include/sane/sanei_config.h:50,
from sm3600.c:70:
.../host/x86_64-buildroot-linux-uclibc/sysroot/usr/include/stdio.h:339:23: note: expected ‘__va_list_tag *’ but argument is of type
‘int’
339 | __gnuc_va_list __arg);
| ~~~~~~~~~~~~~~~^~~~~
In file included from sm3600.c:94:
sm3600-scanutil.c:77:3: warning: implicit declaration of function ‘va_end’ [-Wimplicit-function-declaration]
77 | va_end(ap);
| ^~~~~~
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
CVE-2016-4983 is an issue in a postinstall script in the dovecot rpm,
which is part of the Red Hat packaging and not part of upstream dovecot
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
CVE-2019-15513 was fixed upstream in 2015 with commit
19e29ffc15dbd958e8e6a648ee0982c68353516f, which is older than the commit
we currently use in LIBUCI_VERSION.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: reword comment and commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- add upstream patch fixing gcc-11 compile failure (missing
limits include)
Fixes:
In file included from ../../../include/QtCore/5.15.2/QtCore/private/qoffsetstringarray_p.h:1,
from ../../dbus/qdbuserror.cpp:44:
../../../src/corelib/tools/qoffsetstringarray_p.h:70:22: error: ‘numeric_limits’ is not a member of ‘std’
70 | Last <= std::numeric_limits<quint8>::max(),
| ^~~~~~~~~~~~~~
../../../src/corelib/tools/qoffsetstringarray_p.h:70:43: error: wrong number of template arguments (1, should be 3)
70 | Last <= std::numeric_limits<quint8>::max(),
| ^
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This reverts commit b991962993, which was
incomplete and did not actually fix the issue it purported to fix, and
we'll soon commit a proper fix.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: explain the reason for reverting]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 2eaa6d0f36 (boot/uboot: fix uboot building host tools on x86
architecture) added use of $(PKG_CONFIG_HOST_BINARY), but forgot to add
the corresponding build-ordr dependency.
Add this missing depenency now.
Additionally, the associated test had an explicit host pkgconf enbled in
its configuration. This is superfluous now that uboot properly depends
on host-pkgconf, so drop that from the test.
Note: it hapenned to work, because host-pkgconf, when explicitly enabled
in the configuration, and without per-package directories, would build
before uboot and thus be available. This would fail with PPD, though,
and thus would break for TLPB.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Avahi 0.8 allows a local denial of service (NULL pointer dereference and
daemon crash) against avahi-daemon via the D-Bus interface or a "ping
.local" command.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
PuTTY through 0.75 proceeds with establishing an SSH session even if it
has never sent a substantive authentication response. This makes it
easier for an attacker-controlled SSH server to present a later spoofed
authentication prompt (that the attacker can use to capture credential
data, and use that data for purposes that are undesired by the client
user).
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 56b28d3ee1 (mpg123: bump to version 1.13.1) added the
--disable-lfs-alias option, without explaining why it was needed.
However, this causes undefined references for apps that want to link
against mpg123.
The help for that option is pretty explicit that this is a dangerous
option to use:
disable alias wrappers for largefile bitness (mpg123_seek_32 or
mpg123_seek_64 in addition to mpg123_seek, or the other way around;
It is a mess, do not play with this!)
The default is that it is enabled, so leave it at it.
Signed-off-by: Bruno Marie <gameblabla@protonmail.com>
[yann.morin.1998@free.fr: rework commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Most distributions include a duktape.pc file bundled with the duktape
development package. As the duktape source does not include a .pc file,
add one to the package/duktape directory and install it to the staging
directory. This is used by the polkit duktape patch later in the series.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix build failure with gcc 4.8 which is raised since bump to version
2.72.0 in commit 8e5f7f1cfc:
In file included from /tmp/instance-0/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/resolv.h:65:0,
from /tmp/instance-0/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/glib-2.0/gio/gnetworking.h:40,
from ../libsoup/soup-address.c:14:
/tmp/instance-0/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/arpa/nameser.h:115:2: error: unknown type name 'u_char'
const u_char *_msg, *_eom;
^
Fixes:
- http://autobuild.buildroot.org/results/56b9cb987e25b99d6fed16c537552f47c3376f21
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with gcc 11:
text/qbytearraymatcher.h:103:38: error: 'numeric_limits' is not a member of 'std'
103 | const auto uchar_max = (std::numeric_limits<uchar>::max)();
| ^~~~~~~~~~~~~~
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Tested-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add config option for systemd-sysext.
Add config option for systemd-oomd.
Add new host-python3-jinja2 dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix CVE-2021-33503: An issue was discovered in urllib3 before 1.26.5.
When provided with a URL containing many @ characters in the authority
component, the authority regular expression exhibits catastrophic
backtracking, causing a denial of service if a URL were passed as a
parameter or redirected to via an HTTP redirect.
https://github.com/urllib3/urllib3/blob/1.26.6/CHANGES.rst
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
NOTE: 0001-lib-fs-fix-issue-when-name-open-_to_handle_at-is-not.patch
will be merged in 5.14.0.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bugfix release, mainly solves a few issues with input events,
drag-and-drop, and a few crashes. Release notes:
https://webkitgtk.org/2021/07/09/webkitgtk2.32.2-released.html
The patch for building against uClibc has been included in this release,
therefore "0001-Support-building-against-uClibc.patch" is removed.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bugfix release, mainly solves a few issues with input events and a
few crashes. Release notes:
https://wpewebkit.org/release/wpewebkit-2.32.2.html
The patch for building against uClibc has been included in this release,
therefore "0001-Support-building-against-uClibc.patch" is removed.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Build with wolfssl is broken since bump to version 3.12.1 in commit
4d85defa71:
/data/buildroot-autobuilder/instance-0/output-1/build/libuhttpd-3.12.1/src/ssl/openssl.c: In function 'ssl_context_new':
/data/buildroot-autobuilder/instance-0/output-1/build/libuhttpd-3.12.1/src/ssl/openssl.c:180:32: error: 'SSL_OP_NO_SSLv3' undeclared (first use in this function); did you mean 'WOLFSSL_OP_NO_SSLv3'?
180 | SSL_CTX_set_options(c, SSL_OP_NO_SSLv3 | SSL_OP_NO_TLSv1 | SSL_OP_NO_TLSv1_1);
| ^~~~~~~~~~~~~~~
| WOLFSSL_OP_NO_SSLv3
This build failure is raised by
https://github.com/zhaojh329/libuhttpd/commit/0fb46935f0cd5f737c6f4e6053d62268aca793a7
as since this commit, libuhttpd expects that SSL_OP_NO_xxx are defined
by wolfssl
Fixes:
- http://autobuild.buildroot.org/results/79e3fa697537f2e33863e490b74ec881993eae73
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We have a chicken and egg problem: validation of DNSSEC signatures
doesn't work without a correct clock, but to set the correct clock we
need to contact NTP servers which requires resolving a hostname, which
would normally require DNSSEC validation.
Let's break the cycle by excluding NTP hostname resolution from
validation for now.
Details:
https://github.com/systemd/systemd/commit/abf4e5c1d3ad767bc0ed67883e8e4d916af095ec
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When building openal we were seeing the assert failure:
/home/buildroot/autobuild/run/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/or1k-buildroot-linux-uclibc/9.3.0/../../../../or1k-buildroot-linux-uclibc/bin/ld: CMakeFiles/OpenAL.dir/al/source.cpp.o:
pc-relative relocation against dynamic symbol alSourcePausev
/home/buildroot/autobuild/run/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/or1k-buildroot-linux-uclibc/9.3.0/../../../../or1k-buildroot-linux-uclibc/bin/ld: CMakeFiles/OpenAL.dir/al/source.cpp.o:
pc-relative relocation against dynamic symbol alSourceStopv
/home/buildroot/autobuild/run/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/or1k-buildroot-linux-uclibc/9.3.0/../../../../or1k-buildroot-linux-uclibc/bin/ld: CMakeFiles/OpenAL.dir/al/source.cpp.o:
pc-relative relocation against dynamic symbol alSourceRewindv
/home/buildroot/autobuild/run/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/or1k-buildroot-linux-uclibc/9.3.0/../../../../or1k-buildroot-linux-uclibc/bin/ld: CMakeFiles/OpenAL.dir/al/source.cpp.o:
pc-relative relocation against dynamic symbol alSourcePlayv
collect2: error: ld returned 1 exit status
So add patches to fix this binutils assert link failure on OpenRisc.
It's been suggested upstream and it's pending here:
https://sourceware.org/pipermail/binutils/2021-July/117334.html
Fixes:
http://autobuild.buildroot.net/results/c96/c96f2600f227d6c76114b9fbc41f74a57e40415a/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Running stm32mp1 watchdog is properly recognized and handled by kernel
watchdog framework since Linux v5.6. For details see the Linux commit
85fdc63fe256 ("drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at
probe"). So U-Boot config fragment can be safely removed without
adding userspace watchdog daemon.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The stm32mp157 images successfully boot only once. Subsequent boot
attempts fail to reach U-Boot. The root cause turns out to be in U-Boot
corruption during the first boot. The stm32mp1 U-Boot stores its
environment at the end of GPT partition named 'ssbl' since v2020.10-rc2.
However Buildroot genimage template for stm32mp157 boards creates 'ssbl'
partition w/o extra space for U-Boot primary and redundant environments.
This patch explicitly specifies 'ssbl' partition size that should be
enough for both u-boot.stm32 image (~1M) and both environments (16K).
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Tested-by: Pierre-Jean Texier <texier.pj2@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Unfortunately, this e-mail is boucing:
<ycardaillac@sepro-group.com>: host
seprogroup-com01c.mail.protection.outlook.com[104.47.9.36] said: 550 5.4.1
Recipient address rejected: Access denied. AS(201806281)
[VE1EUR03FT036.eop-EUR03.prod.protection.outlook.com] (in reply to RCPT TO
command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We need to backport a commit to fix a build failure on non-x86.
Also update hash file formatting (2 spaces)
Signed-off-by: Pierre-Jean Texier <texier.pj2@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In new kernels sunxi-mmc driver has been switched to asynchronous probe.
As a result, mmc (SD/eMMC) indexes can be shuffled breaking board boot.
Switch to GPT partitions to use partition labels instead of explicit
mmcblk device names. Note that the default GPT partition table location
conflicts with the SPL location, so move GPT table after bootloaders.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump Linux to 5.12.2 and U-Boot to 2021.04.
Introduce minor cleanup: use SPL options instead of custom image options
for combined SPL image.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump Linux to 5.12.2 and U-Boot to 2021.04.
Introduce minor cleanup: use SPL options instead of custom image options
for combined SPL image.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump Linux to 5.12.2 and U-Boot to 2021.04.
Introduce minor cleanup: use SPL options instead of custom image
options for combined SPL image.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Debug messages in rtl8189fs are enabled by default. Add patch
that disables debug messages to make driver less noisy.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update out-of-tree driver to make it work with Linux kernel v5.12.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Disable -Werror to avoid the following build failure which is raised
since the addition of the package in commit
daae311490
../seatd/seat.c: In function 'seat_activate_device':
../seatd/seat.c:374:48: error: unused parameter 'client' [-Werror=unused-parameter]
374 | static int seat_activate_device(struct client *client, struct seat_device *seat_device) {
| ~~~~~~~~~~~~~~~^~~~~~
Fixes:
- http://autobuild.buildroot.org/results/0ec925aab23d83c52684f5fea7a4395c93a674c4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
libbpf does not support all architectures, for example ARM is not
supported resulting in the following build failure:
bpf.c:53:4: error: #error __NR_bpf not defined. libbpf does not support your arch.
# error __NR_bpf not defined. libbpf does not support your arch.
^
Fixes:
- http://autobuild.buildroot.org/results/288d54100a2e736195a3a04a9e2e035d02ea5c16
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update the commit id for u-boot to include fixes from the starfive-tech
u-boot repository:
494e5ef7b807 jh7100: Enable full 2M L2 cache
4571f5a4e1e4 vic7100: enable cache ways (L2 cache)
abb06422a5cd Remove fdt_high and initrd_high for Starfive
93099a61c7b0 starfive: beaglev: Disable SIFIVE_CLINT and enable RISCV_TIMER
bfb5abac3d1f Revert "riscv: Enable the SiFive CLINT block driver in S-Mode(VIC7100 ONLY)"
7b70e1d44ba9 defconfig: enable cache_wayenable for better performance
7c585978616b configs: earlycon=sbi is deprecated
The commit abb06422a5cd ("Remove fdt_high and initrd_high for Starfive")
has removed the need for buildroot to patch the fdt_addr_r address.
Update linux from commit in the old 5.10 branch that Fedora image was
using to head of esmil_starlight branch [1] which is currently based
on 5.13-rc5 and represents the best kernel for this board [2]. This
commit was tagged as buildroot-20210609 because the branch gets rebased
regularly.
In addition, the updated kernel now has jh7100-beaglev-starlight.dtb so
buildroot no longer needs to copy the dtb from u-boot.
[1] https://github.com/starfive-tech/linux/tree/esmil_starlight
[2] https://github.com/starfive-tech/linux/issues/26
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[Arnout: add comment to refer to the tag in linux repo]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This causes build failure for the first host python package get built,
because the $(STAGING_DIR)/usr/lib/python* may not yet exist by tht
time, so find will whine and fail.
This was was alrady the case for the existing find call, a few lines
above, but that was ignored as find is a left-hand-side of a pipe, so
its return code was ignored.
Fixes:
http://autobuild.buildroot.org/results/860a188bd270c59b1fee2f56f31e73689f0e4979/build-end.log
... where we can see the two find error messages, but only the second
one causes the breakage.
This reverts commit 836528f03e.
Reported-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Herve Codina <herve.codina@bootlin.com>
For per-package directories, we fixup the _sysconfigdata*.py files, so
that they get proper path pointing to the current package's direcotry
structure.
However, the corresponding, pre-compiled blobs _sysconfigdata*.pyc were
left around, and thus are inconsistent with their source. They might
also be regenerated when a package would install a python module; this
regeneration would trigger the soon-to-be-introduced overwrite
detection.
This commit simply removes _sysconfigdata*.pyc files; they will anyway
be regenerated by the PYTHON{,3}_CREATE_PYC_FILES target finalize hooks.
This is an efficient way to guarantee the consistency between the source
and precompiled versions, and to not trigger the overwrite detection.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
[yann.morin.1998@free.frs: reword the commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
APACHE_FIXUP_APR_LIBTOOL tweaks files for per package directory build.
This is typically the kind of operation expected to be in
post-prepare hook.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Original APR_UTIL_FIX_RULES_MK_LIBTOOL tweaked libtool and rules.mk.
libtool is provided by a dependency (apr). It needs to be tweaked
and, as an apr-util external file, this tweak is relevant in
<PKG>_POST_PREPARE_HOOKS.
rules.mk is generated by apr-util configure step and it is private
to apr-util. The modification performed needs to be kept in
<PKG>_POST_CONFIGURE_HOOKS.
This commit splits original APR_UTIL_FIX_RULES_MK_LIBTOOL and
attaches each part to the correct hook.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, when a package needs to modify files it inherits from its
dependencies, because they contain paths, we can only do that in a
pre- or post-configure hook.
However, whatever is done as part of those hooks, will be accounted
to the package itself, and thus will trigger file-overwrite detection.
So, we need a way to be able to actually modify files before we
start monitoring changes in those files.
We introduce a new set of hooks that an individual package can set,
or that a package infra can set, and that are called right before
we snapshot the state of target, and host (to which staging belongs),
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
fixup-libtool-files was called on per-package STAGING_DIR.
Some host-xxxx packages have their .la files with directories
pointing outside their own per-package directory.
This commit, calling fixup-libtool-files on HOST_DIR, fixes this
issue.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some packages (autotools for instance) install documentation
files using install-info. This program adds an entry in
the Info directory file (share/info/dir) and this causes
TARGET_DIR and/or HOST_DIR overwrite.
In order to avoid this overwrite this patch removes the Info
directory file right after any installation.
In order to be as generic as possible, this patch introduces
a new tooling to remove useless and conflicting files based
on the file and/or directory list <PKG>_DROP_FILES_OR_DIRS.
share/info/dir file is added for every packages in this list.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
[yann.morin.1998@free.fr:
- don't expand when nothing to remove
- do not add '/' between $(1) and % as files' paths are
already absolute
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
host-e2fsprogs package overwrites the fsck program and some
manpages previously installed by host-util-linux package.
This patch simply disables fsck in host-e2fsprogs.
host-e2fsprogs is used to build final ext{2,3,4} images.
The missing host-e2fsprogs fsck tool (filesystem integrity check
tool) in HOST_DIR should not lead to issues.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Enabling -DNEBUG, although correct on the paper, causes a lot of
packages to fail to build because they explicitly require not building
with NDEBUG; they use assert() to check actual runtime errors and expect
it to not be elidded away (sometimes with side effects in the arguments
passed to assert().
This reverts commit 5a8c50fe05, as
discussed on the list:
http://lists.busybox.net/pipermail/buildroot/2021-July/313646.html
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Other changes:
- Rename 0034-lib-crypt-uClibc-ng-doesn-t-set-errno-when-encryptio.patch to
0035-lib-crypt-uClibc-ng-doesn-t-set-errno-when-encryptio.patch, as to not
overlap with 0034-Add-an-option-to-disable-the-berkeleydb-module.patch
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The build failed with gazillions of:
"gpg-error.h:1211:2: error: stray '\' in program"
This is already fixed by upstream commit
33593864cd54143db594c4237bba41e14179061c, which we backport. It is
backported as patch 0001, and the existing 0001 renamed to 0002, as it
appears later in the libgpg-error Git history.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix CVE-2021-33560: Libgcrypt before 1.8.8 and 1.9.x before 1.9.3
mishandles ElGamal encryption because it lacks exponent blinding to
address a side-channel attack against mpi_powm, and the window size is
not chosen appropriately. (There is also an interoperability problem
because the selection of the k integer value does not properly consider
the differences between basic ElGamal encryption and generalized ElGamal
encryption.) This, for example, affects use of ElGamal in OpenPGP.
https://dev.gnupg.org/T5305
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
PostGIS 3.1.2
2021/05/21
* Bug Fixes
- #4871, TopoGeometry::geometry cast returns NULL for empty
TopoGeometry objects (Sandro Santilli)
- #4826, postgis_tiger_geocoder Better answers when no zip is provided
(Regina Obe)
- #4817, handle more complex compound coordinate dystems (Paul Ramsey)
- #4842, Only do axis flips on CRS that have a "Lat" as the first column (Paul Ramsey)
- Support recent Proj versions that have removed pj_get_release (Paul Ramsey)
- #4835, Adjust tolerance for geodetic calculations (Paul Ramsey)
- #4840, Improper conversion of negative geographic azimuth to positive (Paul Ramsey)
- #4853, DBSCAN cluster not formed when recordset length equal to minPoints (Dan Baston)
- #4863, Update bboxes after scale/affine coordinate changes (Paul Ramsey)
- #4876, Fix raster issues related to PostgreSQL 14 tablefunc changes
(Paul Ramsey, Regina Obe)
- #4877, mingw64 PostGIS / PostgreSQL 14 compile (Regina Obe, Tom Lane)
- #4838, Update to support Tiger 2020 (Regina Obe)
- #4890, Change Proj cache lifetime to last as long as connection (Paul Ramsey)
- #4845, Add Pg14 build support (Paul Ramsey)
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the chromebook elm configuration to use v5.10 which is an LTS.
With v5.10, none of the patches previously needed to enable the display
are needed anymore. Deleting them and making minor updates to the linux
kernel configuration.
Signed-off-by: Bilal Wasim <bilal.wasim@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Other changes:
- Remove BR2_PACKAGE_PHP_EXT_JSON as the json extension is now an
integral part of PHP and is no longer optional. Due to this, it is
not added to Config.in.legacy.
- Move BR2_PACKAGE_PHP_EXT_XMLRPC to Config.in.legacy as the extension has
been removed. See https://wiki.php.net/rfc/unbundle_xmlprc for an
explination.
- Add a new patch that allows for opcache to cross-compile with PHP8.
- Explicitly disable opcache-jit when opcache is enabled, as the JIT fails
to cross-compile.
- --enable-maintainer-zts is now --enable-zts
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
These patches are necessary for compiling against php8. These patches also
retain the ability to compile against PHP7.2
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
These patches are necessary for compiling against php8. These patches also
retain the ability to compile against PHP7.2 and should be removed during the
next version bump.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Other changes:
- Change --with-gnupg=$(STAGING_DIR)/usr/include to
--with-gnupg=$(STAGING_DIR)/usr as the make system appends /include to the
gnupgp path now.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The make all command run the tools/makefile on the process.
This makefile use "pkg-config" command to support static link.
The issue is the use of pkg-config configured for crosscompiling
to build binaries tools for host architecture.
To fix it, I add pkg-config environment variable to configure it for host.
Add a test to avoid future regress on the build of U-boot.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[yann.morin.1998@free.fr:
- fix mixed space-TAB indentation
- fix check-package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop upstream patch.
Add another patch to fix build with musl.
Update COPYING hash because of date change.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Along with version bump, update hash file to two space format and
switch to HTTPS URL.
Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Note, that the download URL has changed for the new release.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[yann.morin.1998@free.fr: move 'v' out of _VERSION]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Remove patches that now are upstream.
Upstream changes:
- Implement p10 thread controls
- Update p10 sbefifo chip-ops
- For p10 switch default backend to sbefifo
- Separate sbe api into new header libpdbg_sbe.h
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr: drop "exit $?" in post-image.sh]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update to last version of gcnano-binaries compatible with kernel
from StMicroelectronics version 5.10
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
python2 contains a bundled copy of libffi which is currently out of sync with
the latest libffi release. There is an option to use a system libffi, buildroot
already uses it for the target python2 build and for python3. In python3, the
bundled copy doesn't exist anymore and the system-provided libffi is required.
The bundled copy currently fails to build on aarch64 host due to a missing
definition of AARCH64_CALL_CONTEXT_SIZE. This define was removed from the
headers in recent libffi releases and the host compiler might be including the
system headers before the bundled headers.
To solve this and since buildroot already relies on system libffi for target
python2 and python3 anyway, switch host python2 to use system libffi.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Christian Stewart <christian@paral.in>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 3cf2782906 (support/testing/infra/emulator.py: update pre-built
kernels) bumped the default kernels used by the testing infra.
However, the newer armv7 kernel (at least) no longer has support for
lz4-compressed squashfs filesystems.
This breaks the squashfs test:
Filesystem uses "lz4" compression. This is not supported
List of all partitions:
1f00 131072 mtdblock0
(driver?)
1f01 32768 mtdblock1
(driver?)
b300 2048 mmcblk0
driver: mmcblk
No filesystem could mount root, tried:
squashfs
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,0)
Updating the kernel again is a little bit cumbersome, while fixing the
actual test is relatively trivial, so this is what we do: we switch
over to lzo, which is supported by the new kernel:
# zcat /proc/config.gz |grep SQUA
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
# CONFIG_SQUASHFS_XZ is not set
While at it, also drop the superfluous line disabling gzip compression:
it is part of a choice, so enabling one (lzo here) forcibly disables the
others (of which gzip).
Fixes: 3cf2782906
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Will avoid the following warning:
WARNING: Image format was not specified for
'/home/thomas/projets/outputs/TestExt3/images/rootfs.ext3' and
probing guessed raw. Automatically detecting the format is
dangerous for raw images, write operations on block 0 will be
restricted. Specify the 'raw' format explicitly to remove the
restrictions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
All the tests that are using if=sd as a Qemu options are changed to
use infra.img_round_power2() instead of simply extending the size of
the image to the next MB boundary, which is not longer sufficient with
Qemu >= 5.1.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: drop now-useless imports]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since Qemu 5.1, SD card images must have a size that are a power of
two. While some filesystem (such as ext2/3/4) allow to specify the
expected size of the filesystem, others such as SquashFS do not have
this capability.
We were already extending the size of such images to the next 1 MB
boundary using "truncate -s %1M", but that is no longer sufficient. So
instead, we introduce a helper function that extends the size of an
image to the next power of two.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- use f.trunctate() rather than subprocess.call([truncate,...])
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since Qemu 5.1, the SD card size must be a power of two, so the
default size for ext2/3/4 filesystem images of 60 MB is not
suitable. Since 16 MB is used for the Ext4 test, let's use the same
value for the other tests as well (ext2, ext2r1, ext3). Without this
change, the ext2, ext2r1 and ext3 simply fail to run under Qemu >=
5.1.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The BRTest() class implements an assertRunOk() method that does the
very common work of running a command inside the emulator, and
checking that it is successful.
This commit changes all locations where this .assertRunOk() method can
be used, instead of open-coding the same logic.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump U-Boot and Linux kernel versions. Updating U-Boot to 2021.04
requires the following two changes.
First, after switching to binman, u-boot.itb is no more generated for
64-bit sunxi boards. Combined u-boot-sunxi-with-spl.bin image should
be used instead. This image contains SPL, U-Boot, and FIT image,
where FIT image contains other binaries such as BL31 and SCP.
Second, new U-Boot enables support for System Control Processor (SCP)
firmware. SCP firmware is included by default into FIT image in the
combined u-boot-sunxi-with-spl.bin binary. When SCP is not available
or not needed, it should be explicitly disabled by pointing to an
empty file. Support for Allwinner SCP firmware is not yet available
neither in Buildroot nor in mainline kernel. So disable it for now
using custom U-Boot build options.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Switch to mainline TF-A that provides basic support for H5 and A64.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump U-Boot version in TestATFAllwinner. Updating U-Boot version to
2021.04 requires the following two changes.
First, after switching to binman, u-boot.itb is no more generated for
64-bit sunxi boards. Combined u-boot-sunxi-with-spl.bin image should
be used instead. This image contains SPL, U-Boot, and FIT image,
where FIT image contains other binaries such as BL31 and SCP.
Second, new U-Boot enables support for System Control Processor (SCP)
firmware. SCP firmware is included by default into FIT image in the
combined u-boot-sunxi-with-spl.bin binary. When SCP is not available
or not needed, it should be explicitly disabled by pointing to an
empty file. Support for Allwinner SCP firmware is not yet available
neither in Buildroot nor in mainline kernel. So disable it for now
using custom U-Boot build options.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Switch to mainline TF-A that provides basic support for H5 and A64.
Note that Allwinner platform layer in TF-A does not provide support
for GCC stack protection, so make sure to disable this TF-A feature.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Buildroot sets appropriate ENABLE_STACK_PROTECTOR build flag value based
on the toolchain global BR2_SSP_* options, and all packages are built
with that setting.
However it might not be always convenient to automatically infer TF-A
stack protection from the toolchain features. For instance, secure
memory constraints may become an issue and all the extra TF-A features
need to be tuned or disabled in order to shrink TF-A firmware image.
Besides, for any value other than "none", TF-A platform specific hook
'plat_get_stack_protector_canary' must be implemented. However this hook
is not implemented by all the platforms supported by TF-A. For instance,
Allwinner currently does not provide such a hook.
Add an new option that a user can toggle to enable or disable SSP in
their ATF build. If enabled, the SSP level is automatically inherited
from the global setting.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[yann.morin.1998@free.fr: simplify logic with a single boolean]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As this version brings support for kernel up to 5.12, we update the
test cases to use the 5.12 kernel.
Signed-off-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Building with libgcrypt fails since the addition of the package in
commit fbff7d7289:
checking for sparc64-buildroot-linux-gnu-libgcrypt-config... no
checking for libgcrypt-config... no
checking for LIBGCRYPT - version >= 1.5.0... no
configure: error: The selected crypto backend library is not available.
Fix this build failure by helping usbguard to find libgcrypt-config
Fixes:
- http://autobuild.buildroot.org/results/4c19e50a2a5308cb31a62f1b4b538a30353022bb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Don't pass --disable-seccomp and --disable-systemd unconditionally
While at it, also add a space and a new line when needed, and split
the initial CONF_OPTS assignment to have one option per line.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The build of gesftserver in an environment without Python fails with:
checking for Python 2.4 or better... configure: error: cannot find Python 2.4 or better
However, it turns out that Python is only needed for tests, which we
don't run/use in Buildroot, so we can safely build gesftpserver
without Python.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: check the two files are identical]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch implements a simple test in which a dummy file system image
is created, then `bmaptool create` and `bmaptool copy` are used to copy
it to another file.
Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
[Thomas: several reworks, add myself to DEVELOPERS]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: check the two files are identical]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The pre-built vexpress kernel used by the testing infrastructure is a
4.0.0 kernel, which is getting old to be used with reasonably recent
toolchains.
This commit updates the pre-built kernels for both the versatile and
vexpress machines to 5.10.7 (they have already been put online).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
bmaptool allows to drastically reduce the amount of data to transfer
when writing to an SD card. Example with a 544 MiB sdcard.img:
$ bmaptool create sdcard.img > sdcard.bmap
$ gzip sdcard.img
$ bmaptool copy sdcard.img.gz /dev/sdc
bmaptool: info: discovered bmap file 'sdcard.bmap'
bmaptool: info: block map format version 2.0
bmaptool: info: 139265 blocks of size 4096 (544.0 MiB), mapped 23918 blocks (93.4 MiB or 17.2%)
bmaptool: info: copying image 'sdcard.img.gz' to block device '/dev/sdc' using bmap file 'sdcard.bmap'
bmaptool: info: 100% copied
bmaptool: info: synchronizing '/dev/sdc'
bmaptool: info: copying time: 7.7s, copying speed 12.1 MiB/sec
So it means that instead of writing 544 MiB, only 93.4 MiB had to be
written.
In terms of implementation details, compared to the target bmap-tools
package, there are fewer "selects" that are needed because:
- The dependency on setuptools is not needed, because the package
uses the setuptools SETUP_TYPE, so host-python-setuptools is
already a build dependency.
- host-python and host-python3 are always built with Expat XML
support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The br-arm-internal-glibc.config is generally used as a configuration
to test the bleeding edge versions of components. However, it has been
lagging behind somewhat, so let's bring it up-to-date:
- Binutils 2.36.x
- GCC 11.x
Let the fun begin in the autobuilders!
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We backport an upstream patch that fixes the loading of the native
library by the FFI logic. Without this, "import augeas" doesn't work
as it goes into the ctypes.utils.find_library() logic that tries to
use a compiler on the target to find the augeas native library.
Based on initial work from Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is to make sure that host packages that depend on `host-gawk` and that use
`awk` end up using `gawk`, instead of the `awk` symlink installed on the host
system.
On recent Debian-based distributions, `awk` is still symlinked to `mawk` [1].
[1] https://bugs.launchpad.net/ubuntu/+source/mawk/+bug/1841654
Signed-off-by: Hubert Lacote <hubert.lacote@youview.com>
Co-authored-by: Hubert Lacote <hubert.lacote@youview.com>
Co-authored-by: Vicente Olivert Riera <vincent.olivert.riera@youview.com>
[yann.morin.1998@free.fr: move after the target symlink hook]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 04a0094f0e (configs/stm32f469_disco: fix kernel bootup) changed
the defconfig to build a vfat image, but forgot to add dosfstools/mtools
host utilities needed for this.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From the release notes:
================================================================================
Redis 6.2.4 Released Tue July 1 12:00:00 IST 2021
================================================================================
Upgrade urgency: SECURITY, Contains fixes to security issues that affect
authenticated client connections. MODERATE otherwise.
Fix integer overflow in STRALGO LCS (CVE-2021-32625)
Read the whole release note on:
https://github.com/redis/redis/blob/6.2.4/00-RELEASENOTES
Signed-off-by: Titouan Christophe <titouanchristophe@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libressl defaults to $prefix/etc/ssl for its "openssldir" setting, E.G.
the location where configuration files and certificates are searched:
openssl version -d
OPENSSLDIR: "/usr/etc/ssl"
Change it to /etc/ssl so it matches openssl and the expectations of packages
dealing with certificates (ca-certificates, libcurl, p11-kit)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also, since tinyproxy no longer uses a2x, remove its explicit disabling.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even if gcc 9.x is still maintained for some time (gcc 9.5 will be the
last), switch to gcc 10.x since it has been released since 2020-05-07
and gcc 11.x is available since 2021-04-27.
We have been having toolchains in the autobuilders with gcc 10.x since
mid-January 2021, so the vast majority of the problems should have
already been solved.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch allows to use an external toolchain based on gcc 11.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In order to add gcc 11 support for internal and external toolchain in
follow-up commits, introduce BR2_TOOLCHAIN_GCC_AT_LEAST_11 symbol.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
gcc-11 warns about what appears to be an out-of-range array access but
stop the build due to -Werror added to cflags:
arch/sparc/kernel/mdesc.c: In function 'mdesc_node_by_name':
arch/sparc/kernel/mdesc.c:647:22: error: 'strcmp' reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread]
647 | if (!strcmp(names + ep[ret].name_offset, name))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/sparc/kernel/mdesc.c:77:33: note: at offset 16 into source object 'mdesc' of size 16
77 | struct mdesc_hdr mdesc;
| ^~~~~
arch/sparc/kernel/mdesc.c: In function 'mdesc_get_property':
arch/sparc/kernel/mdesc.c:692:22: error: 'strcmp' reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread]
692 | if (!strcmp(names + ep->name_offset, name)) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/sparc/kernel/mdesc.c:77:33: note: at offset 16 into source object 'mdesc' of size 16
77 | struct mdesc_hdr mdesc;
| ^~~~~
arch/sparc/kernel/mdesc.c: In function 'mdesc_next_arc':
arch/sparc/kernel/mdesc.c:719:21: error: 'strcmp' reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread]
719 | if (strcmp(names + ep->name_offset, arc_type))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/sparc/kernel/mdesc.c:77:33: note: at offset 16 into source object 'mdesc' of size 16
77 | struct mdesc_hdr mdesc;
| ^~~~~
cc1: all warnings being treated as errors
The issue was initially reported to gcc [1] where it was analized.
As suggested, change the struct mdesc_elem * accesses from the end
of mdesc to those from the beginning of the data array.
Update the prototype of node_block(), name_block() and data_block()
since the code really seems to want to do is to compute the address
somewhere into the chunk pointed to by hp.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100262
Upstream status: Pending
https://www.spinics.net/lists/sparclinux/msg26385.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
From this version, tests can be disabled, so we pass
"tests=false" as a Meson option.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Disable -Werror to avoid the following build failure with -DNDEBUG
raised since commit 5a8c50fe05
/srv/storage/autobuild/run/instance-2/output-1/build/openswan-3.0.0/programs/rsasigkey/rsasigkey.c:524:6: error: variable 'success' set but not used [-Werror=unused-but-set-variable]
524 | int success;
| ^~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/327a0f2b8f0c51bcbb3edb1c3671870d593e93b9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
CMake options have been renamed: UHTTPD_ prefix was dropped,
BUILD_STATIC_LIBS renamed to BUILD_STATIC.
Also fix handling of BUILD_STATIC: it should only be given when building
static libs, otherwise no dynamic lib is built.
Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Remove 0001-ws2811.c-fix-build-with-gcc-4.8.patch,
it has been merged upstream.
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop upstreamed patch fix-port-forwarding-with-ipv6.
Upstream commit: d29a55c6c344a536089d6b1bcd92be9cdea20641
Signed-off-by: Christian Stewart <christian@paral.in>
Tested-by: Christian Stewart <christian@paral.in>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
usbguard is a software framework to implement USB
device blacklisting and whitelisting based on their
attributes.
More info. on: https://usbguard.github.io/
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout:
- correct indirect dependencies from protobuf instead of libglib2;
- say in Config.in help text that rules.conf has to be created]
libqb is a library providing features for client-server architecture,
such as logging, tracing, inter-process communication (IPC) and polling.
see: https://github.com/ClusterLabs/libqb
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As described by [1], the kernel generated by the configuration for the
STM32f469 Discovery board is buggy. Using a newer kernel, as suggested
by [1], increases the dtb and Kernel image size. In particular, the
5.12 version of the kernel generates a dtb and a kernel image whose sum
exceeds the 2 MByte of the flash module.
So I decided to replace the afboot-stm32 bootloader in the flash with
U-boot to easily boot the system from sdcard without having to worry
about the size of dtb, kernel and rootfs generated by the configuration.
This solution allows you to fix the kernel boot issue and makes it
possible to use its future versions.
[1] http://buildroot-busybox.2317881.n4.nabble.com/Bug-11746-New-stm32f469-didn-t-work-correctly-td219644.html
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Acked-by: Christophe Priouzeau <christophe.priouzeau@foss.st.com>
Tested-by: Christophe Priouzeau <christophe.priouzeau@foss.st.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout:
- specify headers version explicitly, even though it's default;
- bump kernel to 5.12.11]
A (target [0]) package can independently declare installing in various
locations: target, staging, or images. The default is to only install
in target.
When a package opts out from installing to target, but does not opts
in to install in any other location, the package is not downloaded,
extracted, patched, configured, nor built at all. As a consequence, none
of the per-step instrumentation is executed, specifically the listing
of files before/after the package sequence.
Down the line, the package infra does not cope well with that situation,
because the gathering-install step, the one that synchronises all the
optional target, staging, or images install steps, still gets run.
And as #13836 shows, this does not go well:
/bin/sh: /home/tbuild/myboard/build/foo/.files-list.after: No such file or directory
make[1]: *** [/home/tbuild/myboard/build/foo/.stamp_installed] Error 1
make: *** [_all] Error 2
So, we should have ensured that the gathering-install step itself
depends on the build step, which would have solved the issue.
However, this bug really illustrates a more fundamental issue: does it
even make sense to have a package that installs nothing in any location?
Indeed, why even bother with that package to begin with if it will not
provide anything at all?
It turns out that yes, this makes sense. We have some packages, that
do not install anything at all, and do not even build anything; they are
there just to ensure that we can download something that will ultimately
be used by another package. This is the case for example for packages
that provide linux extensions, like aufs [1].
Additionally, some ugly out-of-tree packages could conceivably install
things during the build (or even configure!) steps. That's not unheard
of... [2]
So, the solution is to ensure that the gathering-install step does
depend on the build step, to trigger the proper dependency chain and
have the instrumentation hooks properly run even in that degenerate
case.
Fixes: #13836
[0] a host package can't opt out of installing anything.
[1] that one is actually missing AUFS_INSTALL_TARGET = NO, so this
hides the issue.
[2] even us are not 100% clean on that topic: gcc will install files in
staging and target as part of the same step (not the build, granted,
but still...)
Reported-by: "Weber, Matthew L Collins" <Matthew.Weber@collins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Matthew Weber <matthew.weber@collins.com
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Enable building Weston's libseat launcher, now that the seatd package
is available.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Enable selection of used weston shells. By default all available
shells are enabled to keep the old behavior. The new configuration
options enable the user to select them individually.
Signed-off-by: Martin Elshuber <martin.elshuber@theobroma-systems.com>
[yann.morin.1998@free.fr:
- ensure at least one shell is enabled; desktop arbitrarily chosen
- s/BR2_PACKAGE_WESTON_SHELL_SELECTED/BR2_PACKAGE_WESTON_HAS_SHELL/
- reword associated comment
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This module is only partially compatible with lzlib (which is no longer
maintained).
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[yann.morin.1998@free.fr: amend commit log about limited compatibility]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The descriptions in this package have grown pretty confusing over time.
Try to make this a bit more consistent and up-to-date.
* drop references to old kernel versions not supported by BR anymore
* Remove "Bluez 5.x" string from options
* consistently use the term "plugin" (plugins implement profiles)
* make mentioned profile appreviations upper-case
* make descriptions closer to the ones in BlueZ Readme [0]
* make clear that "tests" refers to the python test scripts
[0] https://git.kernel.org/pub/scm/bluetooth/bluez.git/tree/README?h=5.58
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout:
- remove more 5.x references;
- Use official spelling BlueZ in main help text]
1.5.0 uses Threads by default for cli tool and DSO,
should not be necessary to do anything special.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Commit d13b292cec introduced a patch for rpcbind but also changed the version number to a non-existing value.
Change rpcbind to last released version and adapt hash value.
Signed-off-by: Andreas Ziegler <br015@umbiko.net>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
[yann.morin.1998@free.fr: fix version in patch too, noticed by Baruch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
diff LICENSE:
- This software is copyright (c) 2014 by Graham Barr.
+ This software is copyright (c) 2021 by Graham Barr.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
ubihealthd is only being built, if mtd-utils are being built
--with-ubifs. Reflect that dependency within buildroot.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr: fix check-package]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit d72350e62a disabled boost::logs on
riscv32 due to the use of SYS_futex, which doesn't exist on riscv32.
Revert "package/boost: disable logs with riscv32" and add an upstream
patch that uses SYS_futex_time64 instead.
This reverts commit d72350e62a.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
perl-crypt-openssl-rsa inherits the dependency on openssl indirectly
from perl-crypt-openssl-random. Hwvere, perl-crypt-openssl-rsa needs
the openssl libraries for itself, so it must explicitly depend on it.
So far, this was totally unconsequential, but since commit a83d41867c
(package/libopenssl: add option to enable some features), features can
be configured out, of which RMD160 that perl-crypt-openssl-rsa needs.
If we were to add the select to that option (in a followup commit),
without a dependency to openssl, that would be very confusing in the
future.
So, add the explicit dependency now.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix tarball name for sha256 which is wrong since the addition of the
package in commit 71f7fc8a27
While at it, also update indentation to 2 spaces
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As suggested by Yann, let's avoid announcing the exact date of the
next course, as it gets outdated very often. Instead, use a more
generic wording and simply point to a Bootlin page that has all the
details.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A flaw was found in rsync in versions since 3.2.0pre1. Rsync improperly
validates certificate with host mismatch vulnerability. A remote,
unauthenticated attacker could exploit the flaw by performing a
man-in-the-middle attack using a valid certificate for another hostname
which could compromise confidentiality and integrity of data transmitted
using rsync-ssl. The highest threat from this vulnerability is to data
confidentiality and integrity. This flaw affects rsync versions before
3.2.4.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Peter: add a comment explaining what patch fixes this CVE]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bugfix release. From the release notes:
Some backports of important fixes to the 1.25 series, for very conservative
people.
libmpg123: Backport bit reservoir CRC fix from 1.26
libmpg123: Backport part2_3_length regression fix (bug 312).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_PACKAGE_UDISKS_LVM2 was dropped in commit eb251b3008 (package/lvm2:
drop BR2_PACKAGE_LVM2_APP_LIBRARY), but missed when merging next. Drop it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a python3 host variant since another downstream OSS component
(OP-TEE) uses buildroot and it will depend on a python3 host variant
of python-cryptography.
Signed-off-by: Donald Chan <hoiho@lab126.com>
[yann.morin.1998@free.fr:
- drop target _DEPENDENCIES since this is a host-only package
- instead, add host-openssl to dependencies
- add CPE variables
- also add sync comment for python-pip
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a python3 host variant since we are adding a python3 host variant of
python-cryptography and it is dependent on this.
Signed-off-by: Donald Chan <hoiho@lab126.com>
[yann.morin.1998@free.fr:
- drop target _DEPENDENCIES since this is a host-only package
- also add sync comment to python-cffi
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a python3 host variant since we are adding a python3 host variant of
python-cryptography and it is dependent on this.
Signed-off-by: Donald Chan <hoiho@lab126.com>
[yann.morin.1998@free.fr: also add sync comment to python-pycparser]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a python3 host variant since we are adding a python3 host variant of
python-cryptography and it is dependent on this.
Signed-off-by: Donald Chan <hoiho@lab126.com>
[yann.morin.1998@free.fr:
- add CPE variables
- also add sync comment for python-pip
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a python3 host variant since we are adding a python3 host variant of
python-cryptography and it is dependent on this.
Signed-off-by: Donald Chan <hoiho@lab126.com>
[yann.morin.1998@free.fr: also add sync comment in python-six]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following security issues:
- CVE-2021-33195: The LookupCNAME, LookupSRV, LookupMX, LookupNS, and
LookupAddr functions in net, and their respective methods on the Resolver
type may return arbitrary values retrieved from DNS which do not follow
the established RFC 1035 rules for domain names. If these names are used
without further sanitization, for instance unsafely included in HTML, they
may allow for injection of unexpected content. Note that LookupTXT may
still return arbitrary values that could require sanitization before
further use
- CVE-2021-33196: The NewReader and OpenReader functions in archive/zip can
cause a panic or an unrecoverable fatal error when reading an archive that
claims to contain a large number of files, regardless of its actual size
- CVE-2021-33197: ReverseProxy in net/http/httputil could be made to forward
certain hop-by-hop headers, including Connection. In case the target of
the ReverseProxy was itself a reverse proxy, this would let an attacker
drop arbitrary headers, including those set by the ReverseProxy.Director
- CVE-2021-33198: The SetString and UnmarshalText methods of math/big.Rat
may cause a panic or an unrecoverable fatal error if passed inputs with
very large exponents
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libmpv-static and libmpv-shared are disabled by default resulting in the
following build failure when building with gl but without rpi, wayland
or x11:
Checking for OpenGL without platform-specific code (e.g. for libmpv) : libmpv-shared not found
Checking for OpenGL context support : gl-cocoa not found
You manually enabled the feature 'gl', but the autodetection check failed.
Here is an extract of wscript:
} , {
'name': '--plain-gl',
'desc': 'OpenGL without platform-specific code (e.g. for libmpv)',
'deps': 'libmpv-shared || libmpv-static',
'func': check_true,
}, {
'name': '--gl',
'desc': 'OpenGL context support',
'deps': 'gl-cocoa || gl-x11 || egl-x11 || egl-drm || '
+ 'gl-win32 || gl-wayland || rpi || '
+ 'plain-gl',
'func': check_true,
'req': True,
'fmsg': "No OpenGL video output found or enabled. " +
"Aborting. If you really mean to compile without OpenGL " +
"video outputs use --disable-gl.",
}, {
Enabling both the shared and static libraries is not allowed by mpv, so
we consider the BR2_STATIC_LIBS to be static, and otherwise (i.e.
BR2_SHARED_LIBS and BR2_SHARED_STATIC_LIBS) to be shared.
Fixes:
- http://autobuild.buildroot.org/results/590d2a8b6746ef071dfb439e42b636f81dbdc35d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
- expand config log about shared/static icompatibility
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes https://gitlab.com/buildroot.org/buildroot/-/jobs/1297337965
Commit 15a2f9b819 (package/{mesa3d, mesa3d-headers}: bump
version to 21.0.2) marked BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST as legacy,
but forgot to update the defconfig. The SW rasterizer isn't really needed
with the Intel GPU, so just drop it.
In addition, X11 now needs some help with loading the modules in the correct
order, similar to how it was done for the test in commit 4a3639bad0
(support/testing: test_glxinfo load X11 modules in the right order).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update commit ID to include recent upstream fixes:
- Fix I and D cache synchronization issue (2e2f6faaf105)
- Add carriage return to correct menu formatting (2f6ea51dbb51)
- Add copyright info (7d3413d2ffd9)
- Expand the limit on the size of uboot when update it (623888127a0e)
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update the commit id to include upstream fixes:
- Fix print format in load_and_run_ddr(e976d186e69a)
- Update copyright info (f2b049b7fff2)
- Avoid chiplink address exception (86664be28e5d)
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Disable dc3dd on riscv32 because of the size of time_t (riscv32 has
never had a 32-bit time, and has always been 64-bit from the onset):
In file included from getdate.y:40:
verify.h:132:30: error: negative width in bit-field 'verify_error_if_negative_size__'
132 | (struct { unsigned int verify_error_if_negative_size__: (R) ? 1 : -1; }))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
verify.h:138:61: note: in expansion of macro 'verify_true'
138 | # define verify(R) extern int (* verify_function__ (void)) [verify_true (R)]
| ^~~~~~~~~~~
getdate.y:116:1: note: in expansion of macro 'verify'
116 | verify (LONG_MIN <= TYPE_MINIMUM (time_t) && TYPE_MAXIMUM (time_t) <= LONG_MAX);
| ^~~~~~
Fixes:
- http://autobuild.buildroot.org/results/267151dec9d2328a5f8c61ddf224219a4f617e5c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Parallel build is broken since bump to version 2.03.12 in commit
80997acd35. Commits 4526078d1b, 8a313b019c, and a7186cd1ea tried to fix
that by only installing systemd units when appropriate.
It turns out that there are more cases where parallel build still fails:
http://autobuild.buildroot.org/results/995/995f46ee0033e34261ba7b24b61c41e7a088602b/
>>> lvm2 2.03.12 Installing to staging directory
[...]
[INSTALL] ioctl/libdevmapper.so
[CC] dmsetup.c
/usr/bin/make -C lib install_device-mapper
[CC] dmsetup.c
[...]
[CC] dmsetup
[CC] dmsetup
/nvme/rc-buildroot-test/scripts/instance-0/output-1/host/lib/gcc/arm-buildroot-linux-gnueabihf/10.3.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: /nvme/rc-buildroot-test/scripts/instance-0/output-1/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/Scrt1.o: in function `_start':
(.text+0x54): undefined reference to `main'
collect2: error: ld returned 1 exit status
Makefile:60: recipe for target 'dmsetup' failed
Or:
http://autobuild.buildroot.org/results/a4e/a4ea87da502272dc2e677123b6fbcb0c23106f0b/
>>> lvm2 2.03.12 Installing to staging directory
[...]
[CC] dmsetup
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/lib/gcc/arm-buildroot-linux-musleabihf/9.3.0/../../../../arm-buildroot-linux-musleabihf/bin/ld: /home/giuliobenetti/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-musleabihf/sysroot/lib/Scrt1.o: in function `_start_c':
Scrt1.c:(.text._start_c+0x5c): undefined reference to `main'
collect2: error: ld returned 1 exit status
make[3]: *** [Makefile:61: dmsetup] Error 1
make[3]: Leaving directory '/home/giuliobenetti/autobuild/run/instance-3/output-1/build/lvm2-2.03.12/libdm/dm-tools'
make[2]: *** [../libdm/make.tmpl:315: dm-tools.device-mapper] Error 2
make[2]: *** Waiting for unfinished jobs....
[CC] dmsetup
[INSTALL] dmsetup
[...]
Similar traces in either case: it tries to build dmsetup twice, at
intall time instead of build time.
Fixes:
- http://autobuild.buildroot.org/results/995/995f46ee0033e34261ba7b24b61c41e7a088602b/
- http://autobuild.buildroot.org/results/a4e/a4ea87da502272dc2e677123b6fbcb0c23106f0b/
Note that this is just a workaround for a broken buildsystem anyway:
indeed, the build of dmsetup is done at install time, instead of build
time. More fixes should be worked on with upstream to properly fix the
issue...
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
- update after the three partial fix-commits
- extend commit log accordingly
- add new upstream failures
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Import a small patch from the upstream Bugzilla which is needed to allow
building WPE WebKit against uClibc.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[yann.morin.1998@free.fr: add upstream commit refs in backported patch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
WebKitGTK 2.32.1 includes fixes for building with the Musl libc, which
also makes it possible to use uClibc as well, therefore arrange
dependencies to allow selecting the package any of the C libraries is in
use. This is done by making the dependencies be more granular, basically
following what the wpewebkit package does.
In order to make make it build against uClibc a small patch that has
been submitted to the upstream's Bugzilla is needed.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[yann.morin.1998@free.fr: add upstream commit refs in backported patch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit ff0f55e381 (lvm2: replace !BR2_PACKAGE_LVM2_DMSETUP_ONLY by
BR2_PACKAGE_LVM2_STANDARD_INSTALL) changed a negative-logic option to a
positive-logic option.
However, it kept the ordering of the conditional block, which became a
negatice-logic condition.
This is confusing; let's fix that.
Reported-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump version to 2.92 by:
- removing local patches that have been upstreamed
- adding BR2_TOOLCHAIN_HAS_SYNC_4 dependency
- adding libblockdev dependencies
- adding libmount(contained in util-linux package) dependency
- moving download site to github since it's the new upstream address
- disabling all useless udisks's build option to shrink its size and t
use it as a daemon
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add Libs.private to libraw.pc to fix the following static build failure
with imagemagick which is raised since commit
2f47cfade4:
/home/giuliobenetti/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/9.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: /home/giuliobenetti/autobuild/run/instance-1/output-1/host/bin/../arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libjasper.a(jpg_enc.c.o): in function `jpg_encode':
jpg_enc.c:(.text+0x1f4): undefined reference to `jpeg_stdio_dest'
Fixes:
- http://autobuild.buildroot.org/results/88e43a1ea2059a684e50b0f5f2af407e8c6df2e1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Disabling tests will fix the following build failures on riscv32:
select_poll_epoll.c:408:16: note: each undeclared identifier is reported only once for each function it appears in
select_poll_epoll.c: In function 'ppoll_fds_ulong_max':
select_poll_epoll.c:440:16: error: 'SYS_ppoll' undeclared (first use in this function); did you mean 'SYS_tkill'?
440 | ret = syscall(SYS_ppoll, ufds, ULONG_MAX, NULL, NULL);
| ^~~~~~~~~
| SYS_tkill
select_poll_epoll.c: In function 'pselect_invalid_fd':
select_poll_epoll.c:488:16: error: 'SYS_pselect6' undeclared (first use in this function); did you mean 'SYS_semctl'?
488 | ret = syscall(SYS_pselect6, fd + 1, &rfds, NULL, NULL, NULL, NULL);
| ^~~~~~~~~~~~
| SYS_semctl
Fixes:
- http://autobuild.buildroot.org/results/dd39188a7191efa512a51f18f4c34d9ee711a6a7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
BR2_ENABLE_DEBUG should just steer the availability of debug symbols and
should have no negative effect on performance.
Introduction of 'assert' statements, 'debug'-type builds with additional
logging, etc. should be steered by BR2_ENABLE_RUNTIME_DEBUG instead.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
BR2_ENABLE_DEBUG should just steer the availability of debug symbols and
should have no negative effect on performance.
Introduction of 'assert' statements, 'debug'-type builds with additional
logging, etc. should be steered by BR2_ENABLE_RUNTIME_DEBUG instead.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Below are the flags set by zmqpp depending on the specified CONFIG variable:
CONFIG_FLAGS =
ifeq ($(CONFIG),debug)
CONFIG_FLAGS = -g -fno-inline -ftemplate-depth-1000
endif
ifeq ($(CONFIG),valgrind)
CONFIG_FLAGS = -g -O1 -DNO_DEBUG_LOG -DNO_TRACE_LOG
endif
ifeq ($(CONFIG),max)
CONFIG_FLAGS = -O3 -funroll-loops -ffast-math -finline-functions \
-fomit-frame-pointer -DNDEBUG
endif
ifneq (,$(findstring $(CONFIG),release loadtest))
CONFIG_FLAGS = -O3 -funroll-loops -ffast-math -finline-functions \
-fomit-frame-pointer -DNO_DEBUG_LOG -DNO_TRACE_LOG -DNDEBUG
endif
For the flags added with CONFIG=debug, '-g' is to be steered by the core
infrastructure (could be '-g1', '-g2' etc.)
The flag '-ftemplate-depth' is only a protection against incorrect code and
not really needed in Buildroot context.
Finally, the flag '-fno-inline' may be useful when really stepping through
zmqpp code, but is a very specific use case.
With the above in mind, not passing CONFIG=debug may actually be better.
Use 'CONFIG=buildroot' instead.
Note that we don't pass an empty 'CONFIG' to avoid confusion, as this
variable is also passed through to the variable BUILD_ENV, even though it is
currently unused.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
BR2_ENABLE_DEBUG should just steer the availability of debug symbols and
should have no negative effect on performance.
Introduction of 'assert' statements, 'debug'-type builds with additional
logging, etc. should be steered by BR2_ENABLE_RUNTIME_DEBUG instead.
The sofia-sip package was setting '--enable-ndebug' conditionally based on
BR2_ENABLE_DEBUG, and this would have to be updated to be based on
BR2_ENABLE_RUNTIME_DEBUG.
However, the sofia-sip option '--enable-ndebug' only sets the 'NDEBUG'
preprocessor macro, and the core package infrastructure already sets this
macro correctly based on BR2_ENABLE_RUNTIME_DEBUG.
This means that the explicit '--enable-ndebug' flag can be removed.
Suggested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The preprocessor option NDEBUG, triggered by the configure option
'--enable-ndebug', should be read as 'no-debug'. When NDEBUG is set, asserts
are _disabled_.
The sofia-sip package had inverted logic, and set '--enable-ndebug' when
BR2_ENABLE_DEBUG was enabled, while it should be the other way around.
Reported-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
BR2_ENABLE_DEBUG should just steer the availability of debug symbols and
should have no negative effect on performance.
Introduction of 'assert' statements, 'debug'-type builds with additional
logging, etc. should be steered by BR2_ENABLE_RUNTIME_DEBUG instead.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
BR2_ENABLE_DEBUG should just steer the availability of debug symbols and
should have no negative effect on performance.
Introduction of 'assert' statements, 'debug'-type builds with additional
logging, etc. should be steered by BR2_ENABLE_RUNTIME_DEBUG instead.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
BR2_ENABLE_DEBUG should just steer the availability of debug symbols and
should have no negative effect on performance.
Introduction of 'assert' statements, 'debug'-type builds with additional
logging, etc. should be steered by BR2_ENABLE_RUNTIME_DEBUG instead.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
BR2_ENABLE_DEBUG should just steer the availability of debug symbols and
should have no negative effect on performance.
Introduction of 'assert' statements, 'debug'-type builds with additional
logging, etc. should be steered by BR2_ENABLE_RUNTIME_DEBUG instead.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
sysrepo explicitly sets CMAKE_BUILD_TYPE=Release, ignoring any possible
value of BR2_ENABLE_DEBUG (previously) or BR2_ENABLE_RUNTIME_DEBUG (now).
With the introduction of BR2_ENABLE_RUNTIME_DEBUG, this change should no
longer be necessary. Users that do not wish to have additional runtime
debugging just keep BR2_ENABLE_RUNTIME_DEBUG disabled (default value).
As the 'Debug' build type enables tests, disable them explicitly.
As the 'Debug' build type uses a custom REPO_PATH which does not exist on
target, force /etc/sysrepo like in the 'Release' build type.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Use the default build type for host-sysrepo.
In the current version of sysrepo, this happens to be 'Debug'.
As 'Debug' also enables tests, explicitly disable them.
Suggested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
flare-engine enables profiling when CMAKE_BUILD_TYPE is 'Debug'. The
Buildroot package explicitly avoided that by forcing CMAKE_BUILD_TYPE to
'RelWithDebInfo' when pkg-cmake.mk would normally set it to 'Debug'. Until
recently, this was the case when BR2_ENABLE_DEBUG was enabled.
A previous commit changed the condition under which CMAKE_BUILD_TYPE=Debug
was set, from BR2_ENABLE_DEBUG=y to BR2_ENABLE_RUNTIME_DEBUG=y, so logically
the flare-engine package would have to be updated accordingly.
However, apart from the profiling flag, the flare-engine package only uses
CMAKE_BUILD_TYPE to determine flags that Buildroot wants to control itself,
like optimization and debugging flags.
This means we can fake CMAKE_BUILD_TYPE to a value that has no meaning for
flare-engine itself, without needing to check BR2_ENABLE_DEBUG nor
BR2_ENABLE_RUNTIME_DEBUG.
Incidentally, this trick was already done in case
BR2_TOOLCHAIN_HAS_GCC_BUG_85180 was true, so move that line out of this
condition.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The CMAKE_BUILD_TYPE is currently set as 'Debug' in case BR2_ENABLE_DEBUG is
set, and as 'Release' in other cases. However, while the description of
BR2_ENABLE_DEBUG is to enable debug symbols (no runtime impact), the 'Debug'
build type in CMake can actually have runtime impact. For one, because it
does not set -DNDEBUG like is done for 'Release', but also because packages
may do custom things based on it.
The question of which CMAKE_BUILD_TYPE Buildroot should set, be it 'Debug',
'Release', 'RelWithDebInfo' or others, has come up several times in the
past. See some references below:
- July 2016: switch from Debug to RelWithDebInfo:
https://git.buildroot.org/buildroot/commit/?id=4b0120183404913f7f7788ef4f0f6b51498ef363
- October 2016: switch from RelWithDebInfo back to Debug:
https://git.buildroot.org/buildroot/commit/?id=104bb29e0490bfb487e2e665448dd3ca07fcc2b5
and changes to make sure Buildroot's flags are respected:
https://git.buildroot.org/buildroot/commit/?id=12494ef48f893684d0800e7f6fe39a2ceaed0451
- August 2017: bug #10246 - "BR2_ENABLE_DEBUG does not have the expected
effect for cmake packages"
https://bugs.busybox.net/show_bug.cgi?id=10246
- August 2017: mail thread following bug #10246:
http://lists.busybox.net/pipermail/buildroot/2017-August/200778.html
In the last mail thread, Samuel Martin confirmed that the 'Release' build
type could be used in all cases, because Buildroot is actually making sure
that the optimization flags are those determined by Buildroot, not the
defaults of cmake, thanks to commit 12494ef48f.
But Arnout Vandecappelle objected to using always 'Release', stating that
users may actually want the extra assertions.
With the introduction of BR2_ENABLE_RUNTIME_DEBUG, Buildroot can now cater
for all cases:
- use CMAKE_BUILD_TYPE=Release by default. This makes sure that there is no
unexpected performance degradation triggered by enabling BR2_ENABLE_DEBUG.
- users can optionally enable BR2_ENABLE_RUNTIME_DEBUG if they want runtime
debug info like assertions, at the risk of introducing performance
degradation. In this case, we switch to CMAKE_BUILD_TYPE=Debug.
- orthogonally to the above, BR2_ENABLE_DEBUG still determines passing the
'-g' flag to enable debug symbols, and BR2_OPTIMIZE_X still determines the
used optimization flags.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The 'assert' statement in glibc honors the 'NDEBUG' preprocessor macro: if
it is set, then the assert statement is compiled away.
Define this 'NDEBUG' macro when BR2_ENABLE_RUNTIME_DEBUG is disabled (the
default case).
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some packages have optional runtime assertions, extra traces, or other
elements that can help in debugging problems. However, such runtime elements
can negatively influence performance.
In a test program performing 100K gRPC calls from a client to a local server
and receiving the returned response, we see following execution time:
- runtime debug enabled: 1065 seconds
- runtime debug disabled: 48 seconds
This is more than a factor 20 (!) difference. Analysis shows that the
problem mostly stems from libabseil-cpp (a dependency of gRPC) which enables
mutex deadlock analysis when the preprocessor flag 'NDEBUG' is not set,
which adds a 'backtrace()' call on every lock/unlock. Potentially worse,
when libunwind is enabled and linked with the test program, 'backtrace()' is
not provided by glibc but by libunwind itself.
For production systems, users expect good performance out-of-the-box. In the
example above, the difference is huge and unless explicitly tested and
analyzed, users may not realize that the performance could be much better.
Address this problem by introducing a new option BR2_ENABLE_RUNTIME_DEBUG,
which can be used by packages or package infrastructures to set the
necessary flags.
Note that BR2_ENABLE_RUNTIME_DEBUG is orthogonal to BR2_ENABLE_DEBUG: the
former changes runtime behavior, while the latter is only expected to add
debug symbols to the build. Today, the cmake build system does introduce a
runtime impact when BR2_ENABLE_DEBUG is set, but that will be rectified in a
subsequent commit.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
unscd unconditionally uses __NR_clock_gettime which will raise the
following build failure on riscv32:
nscd-0.54.c:339:14: error: '__NR_clock_gettime' undeclared (first use in this function); did you mean 'clock_gettime'?
339 | if (syscall(__NR_clock_gettime, CLOCK_MONOTONIC, &ts))
| ^~~~~~~~~~~~~~~~~~
| clock_gettime
Fixes:
- http://autobuild.buildroot.org/results/eb77b18f268d8e59c407f757662117a33d3f9ee3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add -std=c++11 to fix the following build failure with gcc 11:
In file included from shared-ptr/base.cxx:5:
../cutl/shared-ptr/base.hxx:34:41: error: ISO C++17 does not allow dynamic exception specifications
34 | operator new (std::size_t, cutl::share) throw (std::bad_alloc);
| ^~~~~
Fixes:
- http://autobuild.buildroot.org/results/60a39d402a0d051c92aa11421b7a14f7729a0380
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Recently in Buildroot the option BR2_PIC_PIE has been enabled by default along
with other hardening features [1]. Since then the nios2 defconfig
qemu_nios2_10m50_defconfig is failing to boot due to a segfault in init program:
Run /init as init process
with arguments:
/init
with environment:
HOME=/
TERM=linux
Failed to execute /init (error -12)
See Buildroot build log and Qemu runtime test log in build artifacts [2].
Analyzing one of the binary with strace show that the problem occur
very early when starting the new process:
# strace ./busybox
execve("./busybox", ["./busybox"], 0x7f91ce90 /* 10 vars */) = -1 ENOMEM
(Cannot allocate memory)
+++ killed by SIGSEGV +++
Several binutils/glibc/gcc version has been tested without any success.
The issue has been reported to the glibc mailing list but it can be a linker
or kernel bug [3].
For the Buildroot 2021.05 release, disable BR2_PIC_PIE until the problem is
found and fixed.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1285145889
[1] https://git.buildroot.net/buildroot/commit/?id=810ba387bec3c5b6904e8893fb4cb6f9d3717466
[2] https://gitlab.com/buildroot.org/buildroot/-/jobs/1285145889
[3] https://sourceware.org/pipermail/libc-alpha/2021-May/126912.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes the following:
- CVE-2021-27803: A vulnerability was discovered in how p2p/p2p_pd.c in
wpa_supplicant before 2.10 processes P2P (Wi-Fi Direct) provision
discovery requests. It could result in denial of service or other impact
(potentially execution of arbitrary code), for an attacker within radio
range.
Signed-off-by: Sam Voss <sam.voss@collins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the wlroots packaging by checking for the correct variable to
determine whether seatd is being built.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Hostapd/wpa_supplicant crypto backend assumes that openssl always
provides DES support. However DES support in openssl has become
optional since commit a83d41867c ("package/libopenssl: add
option to enable some features").
Select openssl DES support in hostapd Kconfig to avoid
build failures.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
MuPDF is a lightweight PDF, XPS, and E-book viewer.
Note: some packages, like PyMuPDF, depend on mupdf's libraries, hence
the patch.
Signed-off-by: Raphaël Mélotte <raphael.melotte@essensium.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout:
- propagate harfbuzz dependencies;
- correct version number in hash file;
- patch on post-patch hook instead of post-extract;
- nicer line splitting]
If BR2_ENABLE_DEBUG is not set, Buildroot did not pass any flag
to control debug level. This means that the build system of the package
itself would control it.
Instead, provide an explicit '-g0' (no debugging symbols) to get consistent
behavior across packages.
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
NTLM is an old authentication protocol depending on DES and MD4 and
its creator, Microsoft, discourage its use since 2010, because it is
weak and vulnerable to many attacks.
libgit2 has support for NTLM and it is enabled by default if openssl
is used, however, since commit a83d41867c ("package/libopenssl: add
option to enable some features"), support for DES and MD4 can be
disabled in openssl.
Since openssl is an optional dependency to libgit2 and getting rid of
NTLM is a goal in itself for many windows administrators, disable NTLM
by default.
Fixes: http://autobuild.buildroot.net/results/efb4ce2174cb6944558e895ce852182ba2738a70
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This update includes a build fix for the RaspberryPi 4 (from 1.5.7)
and a fix for the GL library loader when GLX is involved (from 1.5.6)
Release notes:
https://github.com/anholt/libepoxy/releases/tag/1.5.6https://github.com/anholt/libepoxy/releases/tag/1.5.7
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[francois.perrad@gadz.org: fix indent in hash file]
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[yann.morin.1998@free.fr: meld Adrian and François' patches together]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Among other fixes, switching to the current stable version plugs a few
memory leaks; solves many WebSocket bugs; makes NTLM authentication work;
allows building gobject-introspection data when cross-building (to be
enabled in a separate patch); fixes message cancellation; adds support
for HTTP 308 permanent redirects, same-site cookies, secure cookies,
HSTS, and Brotli compression.
This also removes the unneeded LIBSOUP_CONF_ENV which defined an
autoconf variable, and updates the Meson build configuration options
to follow the changes done by upstream.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[yann.morin.1998@free.fr:
- reorder options and move them one per line
- while at it, do the same for dependencies
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Change libsoup to version 2.66.5, which introduces many fixes. This
needs adding the libpsl dependency, and switching over to Meson as the
autotools based build system is no more. The existing patch is not
needed anymore.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Package libpsl is a new non-optional dependency of future libsoup
versions.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[yann.morin.1998@free.fr: reorder some variables]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: dependencies fit on a single line]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Hostapd/wpa_supplicant crypto backend assumes that openssl always
provides MD4 support. However MD4 support in openssl has become
optional since commit a83d41867c ("package/libopenssl: add
option to enable some features").
Select openssl MD4 support in wpa_supplicant Kconfig to avoid
build failures.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The GStreamer-GL usage in WebKitGTK is usable as long as GStreamer
is configured with a valid platform API (GLX+OpenGL, EGL+OpenGL,
EGL+GLES, etc.), which is exactly what the symbol
BR2_PACKAGE_GST1_PLUGINS_BASE_LIB_OPENGL_HAS_PLATFORM represents.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The GStreamer-GL usage in WPE WebKit is usable as long as GStreamer
is configured with a valid platform API (GLX+OpenGL, EGL+OpenGL,
EGL+GLES, etc.), which is exactly what the symbol
BR2_PACKAGE_GST1_PLUGINS_BASE_LIB_OPENGL_HAS_PLATFORM represents.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Select a few missing multimedia related dependencies:
- BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_AUTODETECT is needed for
"autoaudiosink"; not having this element can cause a crash as
it is used unconditionally.
- BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_MATROSKA and
BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_VPX are needed for
WebM video playback.
Note that BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_VPX depends on THREADS
(because of libvpx), but webktigtk already depend on libgtk3, which
depends on THREADS. The probability that GTK3 drops the dependency on
THREADS is sufficiently close to zero that we need not account for that.
So we do not propagate the THREADS dependency for this option.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Synchronize the list of architectures that have LinuxThreads support
with the ones from uClibc-ng.
Signed-off-by: Mircea GLIGA <mgliga@bitdefender.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Remove upstream patch 0001-remove-werror-flag-from-setup.patch
- Refactor Do-not-export-use-setools.InfoFlowAnalysis-and-setoo.patch to apply
to 4.4.0
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Tested-by: Matthew Weber <matthew.weber@collins.com>
Tested-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Release notes:
https://trustedfirmware-a.readthedocs.io/en/latest/change-log.html#version-2-5
The existing qemu_aarch64_sbsa_defconfig was using an unpinned version
of ATF, so to avoid any regression, it is pinned to the previous
version, 2.4.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr: pin ATF version in qemu_aarch64_sbsa_defconfig]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A mirror of bpf-next linux tree bpf-next/tools/lib/bpf
directory plus its supporting header files. The version
of the package reflects the version of ABI.
Signed-off-by: Jugurtha BELKALEM <jugurtha.belkalem@smile.fr>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Qais Yousef <qais.yousef@arm.com>
Reviewed-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: add hash file]
Other changes:
- Change -Dgi_cross_use_host_gi=true to -Dgi_cross_use_prebuilt_gi=true as the
option has changed.
- Explicitly define python3 in both the host and target builds of
g-ir-tool-template.in
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr:
- add hash for giscanner/scannerlexer.l used as license file
- two spaces in hash file
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Xattrs is required for SELinux. Explicitly enable the feature when the
libselinux package is selected.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Other changes:
- Drop 0002-allow-explicit-disabling-of-tests.patch as this patch has been
upstreamed and the option is now simply "tests."
- Add -Dglib_debug=disabled and -Dlibelf=disabled as defaults to both
HOST_LIBGLIB2_CONF_OPTS and LIBGLIB2_CONF_OPTS
- Refactor existing patches to apply to 2.68.1
Tested with test-pkg -p libglib2 -a.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The new branch "4.x" of at91bootstrap has dropped the contrib directory,
which holds the defconfigs used by the Acmesystems Acqua A5 boards. We
then cannot use the latest at91bootstrap anymore.
As commit e009816c67 introduced support
for at91bootstrap 4.x in the "next" branch, it had to work around this
by pinning these defconfigs to the "latest 3.x" version.
Avoid this and any future incompatibility problems by explicitly
requesting a tested version of at91bootstrap.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
[yann.morin.1998@free.fr: use a custom git, like other acme defconfigs]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Select mandatory libopenssl features (which are selectable since
commit a83d41867c):
- BR2_PACKAGE_LIBOPENSSL_ENABLE_BLOWFISH
- BR2_PACKAGE_LIBOPENSSL_ENABLE_CAST
- BR2_PACKAGE_LIBOPENSSL_ENABLE_DES
Fixes:
- http://autobuild.buildroot.net/results/7fdcaa337a7369673ac4580ff7a2bbccc895dca2
openssl.c:449:35: warning: implicit declaration of function 'EVP_bf_ecb'; did you mean 'EVP_sm4_ecb'? [-Wimplicit-function-declaration]
449 | if (!EVP_EncryptInit_ex(evp_ctx, EVP_bf_ecb(), NULL, NULL, NULL))
| ^~~~~~~~~~
| EVP_sm4_ecb
openssl.c:449:35: warning: passing argument 2 of 'EVP_EncryptInit_ex' makes pointer from integer without a cast [-Wint-conversion]
449 | if (!EVP_EncryptInit_ex(evp_ctx, EVP_bf_ecb(), NULL, NULL, NULL))
| ^~~~~~~~~~~~
| |
| int
In file included from openssl.c:34:
.../host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/include/openssl/evp.h:583:53: note: expected 'const EVP_CIPHER *' {aka 'const struct evp_cipher_st *'} but argument is of type 'int'
583 | const EVP_CIPHER *cipher, ENGINE *impl,
| ~~~~~~~~~~~~~~~~~~^~~~~~
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As spotted by Eugen, BR2_TARGET_AT91BOOTSTRAP3_NEEDS_PYTHON3 currently
is outside the at91bootstrap section, because it was inccorectly added
after the 'endif' statement rather than before, which makes the
menuconfig layout weird.
Move it around.
Reported-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some at91bootstrap3 configurations now use Python scripts on the host
for NAND/PMEC related utilities. In order to be able to use those
scripts, this commit adds a new
BR2_TARGET_AT91BOOTSTRAP3_NEEDS_PYTHON3 which allows to express the
need for host-python3 as a dependency to build at91bootstrap3.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
[Thomas: this was extracted from a patch from Eugen adding
at91bootstrap 4.x support.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The project at https://github.com/linux4sam/at91bootstrap was until
now releasing 3.x versions, which were packaged using
boot/at91bootstrap3/ in Buildroot. Microchip has now started a new
branch of at91bootstrap, called 4.x, which will only support the
following devices: sam9x60, sama5d2, sama5d3, sama5d4, sama7g5. A
number of older devices from Microchip will only be supported by the
existing 3.x series.
Therefore, we cannot simply remove support for the 3.x series, and
allow using only the 4.x series.
So what this commit does is extend the boot/at91bootstrap3 package to
support building both 3.x and 4.x versions. In detail, this implies:
* Having the BR2_TARGET_AT91BOOTSTRAP3_LATEST_VERSION symbol point to
the latest 4.x version. Indeed, we want
BR2_TARGET_AT91BOOTSTRAP3_LATEST_VERSION to really point to the
latest upstream version, even if that means potential breakage for
users. Users who want to use a fixed version of at91bootstrap
should anyway not be using
BR2_TARGET_AT91BOOTSTRAP3_LATEST_VERSION.
* Introduce BR2_TARGET_AT91BOOTSTRAP3_LATEST_VERSION_3X for users who
would like to use the latest 3.x series.
* Adjust the installation logic, as images to install are now in
build/binaries/*.bin instead of binaries/*.bin. In order to not
have to differentiate 3.x and 4.x, we simply use $(wildcard ...) to
expand the list of files to install.
* To make it clear that boot/at91bootstrap3 supports both 3.x and
4.x, we also update the prompt of the package.
at911bootstrap does not carry a license file; so far we were using
main.c as the license file, as it carries the license blurb. Now that we
have a known alternate version, we would need a per-version hash for
that file. However, this is a bit too cumbersome to handle, so just drop
using main.c as the license file. When upstream introduces a proper
license file, we can revisit the situation.
Update the two defconfigs that were using the upstream 3.9.3 version;
all other defconfigs are using custom tarballs or custom git trees.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
[Thomas: while this patch is based on previous work by Eugen, it was
reworked quite significantly.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- drop main.c as license file, explain why
- update the two defconfigs
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, patches with renames are refused, as they reqire patch 2.7
or newer. So far, we did not require that version because it was too
recent to be widely available.
But patch 2.7 has been released in 2012, almost 9 years ago now; it is
old enough that we can start relying on it.
Add a check that patch is GNU patch 2.7 or newer, and so drop the common
check for patch, and drop the check about renames in apply-patches.sh.
Signed-off-by: Ryota Kinukawa <pojiro.jp@gmail.com>
[yann.morin.1998@free.fr:
- drop common check
- shorten variable names
- drop now-incorrect comment about busybox w/desktop
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit reworks how BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS is
defined to more clearly map with the list of platforms supported by
Rust as listed at
https://doc.rust-lang.org/nightly/rustc/platform-support.html. Indeed,
the situation is not as simple as a list of architectures, all
supported for both glibc and musl.
So instead, we take the approach of directly mapping with what's
described at
https://doc.rust-lang.org/nightly/rustc/platform-support.html, which
means:
* A list of Tier 1 platforms (in fact just 3 platforms)
* A list of Tier 2 platforms with host tools (i.e where rustc and
cargo themselves are available for the target, something that isn't
relevant for Buildroot)
* A list of Tier 2 platforms with no host tools support.
For each platform, we add as a comment its Rust tuple name, as listed
at https://doc.rust-lang.org/nightly/rustc/platform-support.html, and
then the corresponding Buildroot architecture/libc dependency.
This is obviously more verbose than it was, but it is also a lot
easier to maintain.
With this, a total of 16 new platforms are supported, 13 of which are
musl-based. The additional non-musl platforms are ARMv5TE, RISC-V
64-bit and Sparc64.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The current rustc package only supports configurations based on glibc
and hardcodes this requirement. This patch prepares the addition of
support for musl-based platforms by using $(LIBC) instead of
hardcoding "gnu" as the C library specifier when defining
RUSTC_TARGET_NAME.
Signed-off-by: Nathaniel Husted <nathaniel.husted@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of passing -latomic through LDFLAGS as done in commit
4ed540ddf5, properly check for it in
configure.ac and add it to numa.pc or numactl users won't be able to get
it
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Qemu 6.0.0 no longer segfaults when running qemu-riscv32. As such, it's now
possible to allow riscv32 to compile gobject-introspection.
This partially reverts commit c94a212390.
The symbol BR2_PACKAGE_GOBJECT_INTROSPECTION_ARCH_SUPPORTS is kept, even
though it is now equivalent to BR2_PACKAGE_HOST_QEMU_ARCH_SUPPORTS,
because it's likely that architecture dependencies will pop up again in
the future.
The configuration of a previously failing autobuilder [1] now passes.
[1] http://autobuild.buildroot.org/results/668397b1df42297505e6fc8353c4752290a5628d
Signed-off-by: Adam Duskett <aduskett@rivian.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Other changes:
- Drop patch 0003-hw-usb-host-libusb.c-fix-build-with-kernel-5.0.patch as it
is part of 6.0.0.
- Rename 0004-meson-add-tests-option.patch to
0003-meson-add-tests-option.patch and refresh it for 6.0.0
Signed-off-by: Adam Duskett <aduskett@rivian.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
openblas has options 'NO_STATIC' and 'NO_SHARED' to steer the installation
of libopenblas.a and libopenblas.so. But this does not impact anything in
the build process, other than copying the respective file to the output
directory.
As openblas is very large (e.g. 3MB on ARM) but applications may only use a
small part of it, such applications may want to link statically with
openblas, even though the global BR2_STATIC_LIBS is not set and not desired.
One approach would have been to introduce options
BR2_PACKAGE_OPENBLAS_BUILD_SHARED_LIB and
BR2_PACKAGE_OPENBLAS_BUILD_STATIC_LIB which could be freely selected
regardless of BR2_STATIC_LIBS / BR2_SHARED_LIBS.
But since the installation of a static library does not have any negative
impact except for some disk space on the host system (.a files are removed
from the target in target-finalize anyway), change the installation rules to
install the static library unconditionally.
NO_SHARED is still passed for static-libs-only systems, because the
dynamic library would unnecessarily take up target disk space for such
systems.
Users that only need the static library would still need to remove the
shared library from a post-build script to actually save space.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The "fb" framebuffer driver needs GPM (mouse support) to compile,
but not DirectFB or Xorg.
The .mk file already has an optional dependency on GPM, so it doesn't
need to be added there.
Also added a Kconfig comment for easier discovery of the GPM
requirement.
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update to version 0.1.3, which is a matenance release which does not
add any new features but can be built against wlroots 0.13.0. A new
build option to toggle man pages is set to always disabled.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Enable using libseat for seat management when possible.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add commands to the seatd package to install the systemd unit included
in the source tarball and a SysV init script, and ensure that the
"video" group gets created.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[yann.morin.1998@free.fr:
- model the init script after package/busybox/S01syslogd
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Introduce a seatd package, which can be used by wlroots 0.12.0 and
newer. The package includes both a library (always built) and an
optional seat management daemon.
The library can use systemd-logind, the seatd daemon, or a simple
builtin in-process mode. Build options are introduced for the daemon
and the built-in mode, as to allow selecting the built-in mode as
default when both the daemon and systemd-logind are not being built.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update wlroots to version 0.13.0. This is a release which changes
API/ABI, applications which use wlroots need to be rebuilt. Currently in
Buildroot there is only cage, to be updated by a follow-up patch of the
series.
Additionally, remove usage of the xcb-icccm build option, which is no
longer available and update the dependencies needed by the X11 support.
Note that the dependencies neded by the X11 backend are a superset of
the ones needed for XWayland support, so we can make toggle both Meson
options at once.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
poke bundle gnulib that doesn't support the case where
host_os='linux-uclibc'. When cross-compiling, the guessed
answers are mostly wrong and gnulib will try to replace
snprintf with rpl_snprintf. This lead to "undefined reference
to `rpl_snprintf'" errors.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Bump kernel to version 5.10.30-ti-r3.
- Bump U-Boot to version 2021.04.
Add mdev to the beaglebone_defconfig. This gives us automatic USB support,
as the omap2plus kernel has most drivers as modules.
While at it, enable VFPv3 with 32 registers (instead of 16) and add a few
comments to the defconfig.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The getrandom() detection from meson.build failes with the following error
message:
.../host/x86_64-buildroot-linux-uclibc/sysroot/usr/include/sys/random.h:27:35: error: unknown type name 'size_t'
27 | extern int getrandom(void *__buf, size_t count, unsigned int flags)
| ^~~~~~
.../host/x86_64-buildroot-linux-uclibc/sysroot/usr/include/sys/random.h:8:1: note: 'size_t' is defined in header '<stddef.h>'; did you forget to '#include <stddef.h>'?
Fix it by adding stddef.h include to the meson getrandom() detection.
Fixes:
- http://autobuild.buildroot.net/results/7e131bec458bf5c263ee1858d38ed5dc3cf704a6
../src/pipewire/impl-core.c:54:9: error: conflicting types for ‘getrandom’
54 | ssize_t getrandom(void *buf, size_t buflen, unsigned int flags) {
| ^~~~~~~~~
In file included from ../src/pipewire/impl-core.c:34:
.../host/x86_64-buildroot-linux-uclibc/sysroot/usr/include/sys/random.h:27:12: note: previous declaration of ‘getrandom’ was here
27 | extern int getrandom(void *__buf, size_t count, unsigned int flags)
| ^~~~~~~~~
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds support for the Globalscale EspressoBin Ultra, which is
an evolution of the EspressoBin family. Same SoC and switchcore, more
Ethernet ports, including one PoE PD port.
Tested-by: Atallah Amine <amine_atallah@outlook.com>
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Backport from upstream mailing list patch from Heiko Thiery which fixes
missing {name_to,open_by}_handle_at() on uclibc-ng < 1.0.35.
Drop patch from v5.8.0.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Dick Olsson <hi@senzilla.io>
[yann.morin.1998@free.fr: drop files from patches not applied]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Boot a QEMU sbsa-ref machine with ATF, EDK2, GRUB2 and a minimal
kernel. This is a simple but effective test of a compliant setup.
Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This introduces a configuration for the SBSA reference machine under
QEMU that is intended for developing and testing firmware. It consists
of ATF that load EDK2 as BL33 which in turn will load GRUB2.
Included with the board files is a minimal kernel configuration, almost
identical to that of board/qemu/aarch64-virt/linux.config. The main
difference is the addition of ACPI which is preferred over DTB for
booting an UEFI system.
Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
EDK2 is a modern, feature-rich, cross-platform firmware development
environment for the UEFI and PI specifications.
The initial version of this bootloader package makes it possible to
build firmware for the following seven configurations:
* QEMU x86-64 pc machine
* QEMU aarch64 virt machine, booting directly from flash
* QEMU aarch64 virt machine, booting via the kernel protocol
* QEMU aarch64 sbsa-ref machine
* ARM FVP vexpress machine
* Socionext SynQuacer Developerbox
* SolidRun MacchiatoBin
Support the use of EDK2 UEFI payloads as BL33 in ARM Trusted Firmware.
Signed-off-by: Dick Olsson <hi@senzilla.io>
[yann.morin.1998@free.fr:
- duplicate defaults in Config.in
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
EDK2 firmware is usually built from two sources; the core EDK2
environment, and additional platform description files maintained
separately. This package adds the latter set of description files to
staging so that the core EDK2 package can build with these for certain
platforms during the building process.
Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Openssl implements lot of algorithms that are not required in some
emdedded devices and cyphers known as weak. Secure embedded systems
shall disable unused algorithms (and weak algo) in order to be
certified.
This patch allows to select weak algorithms and mecanims to enable
such as md5.
To ensure backward compatibility, all items are selected by default.
Signed-off-by: Erwan GAUTRON <erwan.gautron@bertin.fr>
[yann.morin.1998@free.fr:
- drop help texts that just repeat the prompts
- fix check-package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update wayland to version 1.19.0, which mostly includes bug fixes and is
the minimum version required by wlroots 0.13.0
Patch "0001-build-add-option-to-disable-tests.patch" is updated as an
actual backport from upstream. Since upstream has migrated to meson, and
we've already switched too, drop the autostuff hunks.
Patch "0002-meson-do-not-check-for-c.patch" is replaced by a newer one,
"0002-meson-only-require-cpp-for-tests.patch" which was accepted by
upstream as an improved version of it.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[yann.morin.1998@free.fr:
- do actual backports of upstream patches now they've been merged
- consequently, drop the legacy autostuff hunks from first patch
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
# default GPT location conflicts with bootloaders, move it after
gpt-location = 1M
}
partition u-boot {
in-partition-table="no"
image = "u-boot-sunxi-with-spl.bin"
offset = 8192
size = 1040384 # 1MB - 8192
offset = 8K
size = 1032K # 1MB - 8KB + 16KB(GPT)
}
partition boot {
@@ -28,6 +33,8 @@ image sdcard.img {
image = "boot.vfat"
}
# 'rootfs' will be used as the partition label, used
# with root=PARTLABEL=rootfs kernel command line
partition rootfs {
partition-type=0x83
image = "rootfs.ext4"
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Peter Korsgaard