Compare commits

...
79 Commits
Author SHA1 Message Date
Michael Roth fcf75ad007 Update version for 2.6.1 release
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-17 10:24:53 -05:00
Gonglei 5125bef25a timer: set vm_clock disabled default
(commit 80dcfb8532)
Upon migration, the code use a timer based on vm_clock for 1ns
in the future from post_load to do the event send in case host_connected
differs between migration source and target.

However, it's not guaranteed that the apic is ready to inject irqs into
the guest, and the irq line remained high, resulting in any future interrupts
going unnoticed by the guest as well.

That's because 1) the migration coroutine is not blocked when it get EAGAIN
while reading QEMUFile. 2) The vm_clock is enabled default currently, it doesn't
rely on the calling of vm_start(), that means vm_clock timers can run before
VCPUs are running.

So, let's set the vm_clock disabled default, keep the initial intention of
design for vm_clock timers.

Meanwhile, change the test-aio usecase, using QEMU_CLOCK_REALTIME instead of
QEMU_CLOCK_VIRTUAL as the block code does.

CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Message-Id: <1470728955-90600-1-git-send-email-arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 3fdd0ee393)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-15 08:57:36 -05:00
Bruce Rogers beeff749f6 Xen PCI passthrough: fix passthrough failure when no interrupt pin
Commit 5a11d0f7 mistakenly converted a log message into an error
condition when no pin interrupt is found for the pci device being
passed through. Revert that part of the commit.

Signed-off-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
(cherry picked from commit 0968c91ce0)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-15 08:57:24 -05:00
Laurent Vivier 1f1b96a1df ppc64: fix compressed dump with pseries kernel
If we don't provide the page size in target-ppc:cpu_get_dump_info(),
the default one (TARGET_PAGE_SIZE, 4KB) is used to create
the compressed dump. It works fine with Macintosh, but not with
pseries as the kernel default page size is 64KB.

Without this patch, if we generate a compressed dump in the QEMU monitor:

    (qemu) dump-guest-memory -z qemu.dump

This dump cannot be read by crash:

    # crash vmlinux qemu.dump
    ...
    WARNING: cannot translate vmemmap kernel virtual addresses:
             commands requiring page structure contents will fail
    ...

Page_size is used to determine the dumpfile's block size. The
block size needs to be at least the page size, but a multiple of page
size works fine too. For PPC64, linux supports either 4KB or 64KB software
page size. So we define the page_size to 64KB.

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(cherry picked from commit 760d88d1d0)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-15 08:55:58 -05:00
Prasad J Pandit 236039b89d scsi: esp: check TI buffer index before read/write
The 53C9X Fast SCSI Controller(FSC) comes with internal 16-byte
FIFO buffers. One is used to handle commands and other is for
information transfer. Three control variables 'ti_rptr',
'ti_wptr' and 'ti_size' are used to control r/w access to the
information transfer buffer ti_buf[TI_BUFSZ=16]. In that,

'ti_rptr' is used as read index, where read occurs.
'ti_wptr' is a write index, where write would occur.
'ti_size' indicates total bytes to be read from the buffer.

While reading/writing to this buffer, index could exceed its
size. Add check to avoid OOB r/w access.

Reported-by: Huawei PSIRT <psirt@huawei.com>
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1465230883-22303-1-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit ff589551c8)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 16:01:08 -05:00
Prasad J Pandit 407fb6fce9 scsi: megasas: null terminate bios version buffer
While reading information via 'megasas_ctrl_get_info' routine,
a local bios version buffer isn't null terminated. Add the
terminating null byte to avoid any OOB access.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 844864fbae)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:31:33 -05:00
Prasad J Pandit 27fa5e735a scsi: esp: make cmdbuf big enough for maximum CDB size
While doing DMA read into ESP command buffer 's->cmdbuf', it could
write past the 's->cmdbuf' area, if it was transferring more than 16
bytes.  Increase the command buffer size to 32, which is maximum when
's->do_cmd' is set, and add a check on 'len' to avoid OOB access.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 926cde5f3e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:31:04 -05:00
Paolo Bonzini 8c04a291c9 scsi: esp: clean up handle_ti/esp_do_dma if s->do_cmd
Avoid duplicated code between esp_do_dma and handle_ti.  esp_do_dma
has the same code that handle_ti contains after the call to esp_do_dma;
but the code in handle_ti is never reached because it is in an "else if".
Remove the else and also the pointless return.

esp_do_dma also has a partially dead assignment of the to_device
variable.  Sink it to the point where it's actually used.

Finally, assert that the other caller of esp_do_dma (esp_transfer_data)
only transfers data and not a command.  This is true because get_cmd
cancels the old request synchronously before its caller handle_satn_stop
sets do_cmd to 1.

Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 7f0b6e114a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:30:50 -05:00
Paolo Bonzini aa6905db96 scsi: esp: respect FIFO invariant after message phase
The FIFO contains two bytes; hence the write ptr should be two bytes ahead
of the read pointer.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit d020aa504c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:30:39 -05:00
Prasad J Pandit e5c4e642be scsi: esp: check buffer length before reading scsi command
The 53C9X Fast SCSI Controller(FSC) comes with an internal 16-byte
FIFO buffer. It is used to handle command and data transfer.
Routine get_cmd() in non-DMA mode, uses 'ti_size' to read scsi
command into a buffer. Add check to validate command length against
buffer size to avoid any overrun.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1464717207-7549-1-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit d3cdc49138)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:30:23 -05:00
Prasad J Pandit 80eb9b8c44 scsi: megasas: check 'read_queue_head' index value
While doing MegaRAID SAS controller command frame lookup, routine
'megasas_lookup_frame' uses 'read_queue_head' value as an index
into 'frames[MEGASAS_MAX_FRAMES=2048]' array. Limit its value
within array bounds to avoid any OOB access.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1464179110-18593-1-git-send-email-ppandit@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit b60bdd1f1e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:30:08 -05:00
Prasad J Pandit 19dcd481ac scsi: megasas: initialise local configuration data buffer
When reading MegaRAID SAS controller configuration via MegaRAID
Firmware Interface(MFI) commands, routine megasas_dcmd_cfg_read
uses an uninitialised local data buffer. Initialise this buffer
to avoid stack information leakage.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1464178304-12831-1-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit d37af74073)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:29:51 -05:00
Prasad J Pandit 1467b936d9 scsi: megasas: use appropriate property buffer size
When setting MegaRAID SAS controller properties via MegaRAID
Firmware Interface(MFI) commands, a user supplied size parameter
is used to set property value. Use appropriate size value to avoid
OOB access issues.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1464172291-2856-2-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 1b85898025)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:28:56 -05:00
Prasad J Pandit 7a2c32ec06 net: mipsnet: check packet length against buffer
When receiving packets over MIPSnet network device, it uses
receive buffer of size 1514 bytes. In case the controller
accepts large(MTU) packets, it could lead to memory corruption.
Add check to avoid it.

Reported by: Oleksandr Bazhaniuk <oleksandr.bazhaniuk@intel.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>

(cherry picked from commit 3af9187fc6)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:28:45 -05:00
Cole Robinson 780d8317c8 hw/arm/virt: Reject gic-version=host for non-KVM
If you try to gic-version=host with TCG on a KVM aarch64 host,
qemu segfaults, since host requires KVM APIs.

Explicitly reject gic-version=host if KVM is not enabled

https://bugzilla.redhat.com/show_bug.cgi?id=1339977
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-id: b1b3b0dd143b7995a7f4062966b80a2cf3e3c71e.1464273085.git.crobinso@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 0bf8039dca)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:28:21 -05:00
Cole Robinson c5ba71b6b9 ui: spice: Exit if gl=on EGL init fails
The user explicitly requested spice GL, so if we know it isn't
going to work we should exit

Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: e3789e35b16f9e3cc6f2652f91c52d88ba6d6936.1463588606.git.crobinso@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit daafc661cc)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:27:59 -05:00
Gerd Hoffmann 84da2c6701 sdl2: skip init without outputs
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Cole Robinson <crobinso@redhat.com>
Message-id: 1464790116-32405-1-git-send-email-kraxel@redhat.com
(cherry picked from commit 8efa5f29f8)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:27:37 -05:00
Cole Robinson ccecdf758d ui: sdl2: Release grab before opening console window
sdl 2.0.4 currently has a bug which causes our UI shortcuts to fire
rapidly in succession:

  https://bugzilla.libsdl.org/show_bug.cgi?id=3287

It's a toss up whether ctrl+alt+f or ctrl+alt+2 will fire an
odd or even number of times, thus determining whether the action
succeeds or fails.

Opening monitor/serial windows is doubly broken, since it will often
lock the UI trying to grab the pointer:

  0x00007fffef3720a5 in SDL_Delay_REAL () at /lib64/libSDL2-2.0.so.0
  0x00007fffef3688ba in X11_SetWindowGrab () at /lib64/libSDL2-2.0.so.0
  0x00007fffef2f2da7 in SDL_SendWindowEvent () at /lib64/libSDL2-2.0.so.0
  0x00007fffef2f080b in SDL_SetKeyboardFocus () at /lib64/libSDL2-2.0.so.0
  0x00007fffef35d784 in X11_DispatchFocusIn.isra.8 () at /lib64/libSDL2-2.0.so.0
  0x00007fffef35dbce in X11_DispatchEvent () at /lib64/libSDL2-2.0.so.0
  0x00007fffef35ee4a in X11_PumpEvents () at /lib64/libSDL2-2.0.so.0
  0x00007fffef2eea6a in SDL_PumpEvents_REAL () at /lib64/libSDL2-2.0.so.0
  0x00007fffef2eeab5 in SDL_WaitEventTimeout_REAL () at /lib64/libSDL2-2.0.so.0
  0x000055555597eed0 in sdl2_poll_events (scon=0x55555876f928) at ui/sdl2.c:593

We can work around that hang by ungrabbing the pointer before launching
a new window. This roughly matches what our sdl1 code does

Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-id: 31c9ab6540b031f7a614c59edcecea9877685612.1462557436.git.crobinso@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 56f289f383)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:25:57 -05:00
Cole Robinson 0f9745afaa ui: gtk: fix crash when terminal inner-border is NULL
VTE terminal inner-border can be NULL. The vte-0.36 (API 2.90)
code checks for the condition too so I assume it's not just a bug

Fixes a crash on Fedora 24 with gtk 3.20

Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-id: 2b2e85d403e8760ea53afd735a170500d5c17716.1462557436.git.crobinso@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 4fd811a6bd)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:25:53 -05:00
Marc-André Lureau 94c8340d93 ahci: free irqs array
Each irq is referenced by the IDEBus in ide_init2(), thus we can free
the no longer used array.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
(cherry picked from commit 9d324b0e67)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:25:31 -05:00
Marc-André Lureau 3d34297e9c ahci: fix sglist leak on retry
ahci-test /x86_64/ahci/io/dma/lba28/retry triggers the following leak:

Direct leak of 16 byte(s) in 1 object(s) allocated from:
    #0 0x7fc4b2a25e20 in malloc (/lib64/libasan.so.3+0xc6e20)
    #1 0x7fc4993bce58 in g_malloc (/lib64/libglib-2.0.so.0+0x4ee58)
    #2 0x556a187d4b34 in ahci_populate_sglist hw/ide/ahci.c:896
    #3 0x556a187d8237 in ahci_dma_prepare_buf hw/ide/ahci.c:1367
    #4 0x556a187b5a1a in ide_dma_cb hw/ide/core.c:844
    #5 0x556a187d7eec in ahci_start_dma hw/ide/ahci.c:1333
    #6 0x556a187b650b in ide_start_dma hw/ide/core.c:921
    #7 0x556a187b61e6 in ide_sector_start_dma hw/ide/core.c:911
    #8 0x556a187b9e26 in cmd_write_dma hw/ide/core.c:1486
    #9 0x556a187bd519 in ide_exec_cmd hw/ide/core.c:2027
    #10 0x556a187d71c5 in handle_reg_h2d_fis hw/ide/ahci.c:1204
    #11 0x556a187d7681 in handle_cmd hw/ide/ahci.c:1254
    #12 0x556a187d168a in check_cmd hw/ide/ahci.c:510
    #13 0x556a187d0afc in ahci_port_write hw/ide/ahci.c:314
    #14 0x556a187d105d in ahci_mem_write hw/ide/ahci.c:435
    #15 0x556a1831d959 in memory_region_write_accessor /home/elmarco/src/qemu/memory.c:525
    #16 0x556a1831dc35 in access_with_adjusted_size /home/elmarco/src/qemu/memory.c:591
    #17 0x556a18323ce3 in memory_region_dispatch_write /home/elmarco/src/qemu/memory.c:1262
    #18 0x556a1828cf67 in address_space_write_continue /home/elmarco/src/qemu/exec.c:2578
    #19 0x556a1828d20b in address_space_write /home/elmarco/src/qemu/exec.c:2635
    #20 0x556a1828d92b in address_space_rw /home/elmarco/src/qemu/exec.c:2737
    #21 0x556a1828daf7 in cpu_physical_memory_rw /home/elmarco/src/qemu/exec.c:2746
    #22 0x556a183068d3 in cpu_physical_memory_write /home/elmarco/src/qemu/include/exec/cpu-common.h:72
    #23 0x556a18308194 in qtest_process_command /home/elmarco/src/qemu/qtest.c:382
    #24 0x556a18309999 in qtest_process_inbuf /home/elmarco/src/qemu/qtest.c:573
    #25 0x556a18309a4a in qtest_read /home/elmarco/src/qemu/qtest.c:585
    #26 0x556a18598b85 in qemu_chr_be_write_impl /home/elmarco/src/qemu/qemu-char.c:387
    #27 0x556a18598c52 in qemu_chr_be_write /home/elmarco/src/qemu/qemu-char.c:399
    #28 0x556a185a2afa in tcp_chr_read /home/elmarco/src/qemu/qemu-char.c:2902
    #29 0x556a18cbaf52 in qio_channel_fd_source_dispatch io/channel-watch.c:84

Follow John Snow recommendation:
  Everywhere else ncq_err is used, it is accompanied by a list cleanup
  except for ncq_cb, which is the case you are fixing here.

  Move the sglist destruction inside of ncq_err and then delete it from
  the other two locations to keep it tidy.

  Call dma_buf_commit in ide_dma_cb after the early return. Though, this
  is also a little wonky because this routine does more than clear the
  list, but it is at the moment the centralized "we're done with the
  sglist" function and none of the other side effects that occur in
  dma_buf_commit will interfere with the reset that occurs from
  ide_restart_bh, I think

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
(cherry picked from commit 5839df7b71)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:25:23 -05:00
Mark Cave-Ayland ff71767e06 macio: set res_count value to 0 after non-block ATAPI DMA transfers
res_count should be set to the number of outstanding bytes after a DBDMA
request. Unfortunately this wasn't being set to zero by the non-block
transfer codepath meaning drivers that checked the descriptor result for
such requests (e.g reading the CDROM TOC) would assume from a non-zero result
that the transfer had failed.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

(cherry picked from commit 16275edb34)
Conflicts:
	hw/ide/macio.c

* removed context dependancy on ddd495e5

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:24:25 -05:00
John Snow ec211e7426 atapi: fix halted DMA reset
Followup to 87ac25fd, this time for ATAPI DMA.

Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1470164128-28158-1-git-send-email-jsnow@redhat.com
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
(cherry picked from commit 7f951b2d77)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-09 14:16:18 -05:00
John Snow 16a87c4a5d ide: fix halted IO segfault at reset
If one attempts to perform a system_reset after a failed IO request
that causes the VM to enter a paused state, QEMU will segfault trying
to free up the pending IO requests.

These requests have already been completed and freed, though, so all
we need to do is NULL them before we enter the paused state.

Existing AHCI tests verify that halted requests are still resumed
successfully after a STOP event.

Analyzed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1469635201-11918-2-git-send-email-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
(cherry picked from commit 87ac25fd1f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 16:59:20 -05:00
Stefan Hajnoczi 86cc089aa7 virtio: error out if guest exceeds virtqueue size
A broken or malicious guest can submit more requests than the virtqueue
size permits, causing unbounded memory allocation in QEMU.

The guest can submit requests without bothering to wait for completion
and is therefore not bound by virtqueue size.  This requires reusing
vring descriptors in more than one request, which is not allowed by the
VIRTIO 1.0 specification.

In "3.2.1 Supplying Buffers to The Device", the VIRTIO 1.0 specification
says:

  1. The driver places the buffer into free descriptor(s) in the
     descriptor table, chaining as necessary

and

  Note that the above code does not take precautions against the
  available ring buffer wrapping around: this is not possible since the
  ring buffer is the same size as the descriptor table, so step (1) will
  prevent such a condition.

This implies that placing more buffers into the virtqueue than the
descriptor table size is not allowed.

QEMU is missing the check to prevent this case.  Processing a request
allocates a VirtQueueElement leading to unbounded memory allocation
controlled by the guest.

Exit with an error if the guest provides more requests than the
virtqueue size permits.  This bounds memory allocation and makes the
buggy guest visible to the user.

This patch fixes CVE-2016-5403 and was reported by Zhenhao Hong from 360
Marvel Team, China.

Reported-by: Zhenhao Hong <hongzhenhao@360.cn>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit afd9096eb1)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 16:56:53 -05:00
Dave Hansen 502c8e86ea target-i386: fix typo in xsetbv implementation
QEMU 2.6 added support for the XSAVE family of instructions, which
includes the XSETBV instruction which allows setting the XCR0
register.

But, when booting Linux kernels with XSAVE support enabled, I was
getting very early crashes where the instruction pointer was set
to 0x3.  I tracked it down to a jump instruction generated by this:

        gen_jmp_im(s->pc - pc_start);

where s->pc is pointing to the instruction after XSETBV and pc_start
is pointing _at_ XSETBV.  Subtract the two and you get 0x3.  Whoops.

The fix is to replace this typo with the pattern found everywhere
else in the file when folks want to end the translation buffer.

Richard Henderson confirmed that this is a bug and that this is the
correct fix.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: qemu-stable@nongnu.org
Cc: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit ba03584f4f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 16:56:11 -05:00
Michael S. Tsirkin a87cef825a pcie: fix link active status bit migration
We changed link status register in pci express endpoint capability
over time. Specifically,

commit b2101eae63 ("pcie: Set the "link
active" in the link status register") set data link layer link active
bit in this register without adding compatibility to old machine types.

When migrating from qemu 2.3 and older this affects xhci devices which
under machine type 2.0 and older have a pci express endpoint capability
even if they are on a pci bus.

Add compatibility flags to make this bit value match what it was under
2.3.

Additionally, to avoid breaking migration from qemu 2.3 and up,
suppress checking link status during migration: this seems sane
since hardware can change link status at any time.

https://bugzilla.redhat.com/show_bug.cgi?id=1352860

Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Fixes: b2101eae63
    ("pcie: Set the "link active" in the link status register")
Cc: qemu-stable@nongnu.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

(cherry picked from commit 6b4495401b)
Conflicts:
	hw/pci/pcie.c

* removed functional dependency on 6383292

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 16:45:19 -05:00
Eric Blake 97b5a97f2f nbd: Limit nbdflags to 16 bits
Rather than asserting that nbdflags is within range, just give
it the correct type to begin with :)  nbdflags corresponds to
the per-export portion of NBD Protocol "transmission flags", which
is 16 bits in response to NBD_OPT_EXPORT_NAME and NBD_OPT_GO.

Furthermore, upstream NBD has never passed the global flags to
the kernel via ioctl(NBD_SET_FLAGS) (the ioctl was first
introduced in NBD 2.9.22; then a latent bug in NBD 3.1 actually
tried to OR the global flags with the transmission flags, with
the disaster that the addition of NBD_FLAG_NO_ZEROES in 3.9
caused all earlier NBD 3.x clients to treat every export as
read-only; NBD 3.10 and later intentionally clip things to 16
bits to pass only transmission flags).  Qemu should follow suit,
since the current two global flags (NBD_FLAG_FIXED_NEWSTYLE
and NBD_FLAG_NO_ZEROES) have no impact on the kernel's behavior
during transmission.

CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>

Message-Id: <1469129688-22848-3-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 7423f41782)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 16:19:20 -05:00
Peter Maydell 2317b328bc nbd: Don't use *_to_cpup() functions
The *_to_cpup() functions are not very useful, as they simply do
a pointer dereference and then a *_to_cpu(). Instead use either:
 * ld*_*_p(), if the data is at an address that might not be
   correctly aligned for the load
 * a local dereference and *_to_cpu(), if the pointer is
   the correct type and known to be correctly aligned

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1465570836-22211-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 773dce3c72)
* context prereq for 7423f417
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 16:19:04 -05:00
Eric Blake ce00e529bc nbd: More debug typo fixes, use correct formats
Clean up some debug message oddities missed earlier; this includes
some typos, and recognizing that %d is not necessarily compatible
with uint32_t. Also add a couple messages that I found useful
while debugging things.

Signed-off-by: Eric Blake <eblake@redhat.com>

Message-Id: <1463006384-7734-3-git-send-email-eblake@redhat.com>
[Do not use PRIx16, clang complains. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

(cherry picked from commit 2cb347493c)
* context prereq for 7423f41
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 16:15:11 -05:00
Stefan Weil 28eae0af65 Fix some typos found by codespell
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit cb8d4c8f54)
* context prereq for 2cb34749
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 16:14:47 -05:00
Peter Lieven 5634eb8ffb block/iscsi: fix rounding in iscsi_allocationmap_set
when setting clusters as alloacted the boundaries have
to be expanded. As Paolo pointed out the calculation of
the number of clusters is wrong:

Suppose cluster_sectors is 2, sector_num = 1, nb_sectors = 6:

In the "mark allocated" case, you want to set 0..8, i.e.
cluster_num=0, nb_clusters=4.

   0--.--2--.--4--.--6--.--8
   <--|_________________|-->  (<--> = expanded)

Instead you are setting nb_clusters=3, so that 6..8 is not marked.

   0--.--2--.--4--.--6--.--8
   <--|______________|!!!     (! = wrong)

Cc: qemu-stable@nongnu.org
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1468831940-15556-2-git-send-email-pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit eb36b953e0)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 16:03:41 -05:00
Fam Zheng b6ece2c6f3 util: Fix MIN_NON_ZERO
MIN_NON_ZERO(1, 0) is evaluated to 0. Rewrite the macro to fix it.

Reported-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1468306113-847-1-git-send-email-famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit d27ba624aa)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 16:03:16 -05:00
Alberto Garcia 8d7d7764d5 qemu-iotests: Test naming of throttling groups
Throttling groups are named using the 'group' parameter of the
block_set_io_throttle command and the throttling.group command-line
option. If that parameter is unspecified the groups get the name of
the block device.

This patch adds a new test to check the naming of throttling groups.

Signed-off-by: Alberto Garcia <berto@igalia.com>
* backport of 435d5ee
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 16:01:24 -05:00
Alberto Garcia 704ab2fce4 blockdev: Fix regression with the default naming of throttling groups
When I/O limits are set for a block device, the name of the throttling
group is taken from the BlockBackend if the user doesn't specify one.

Commit efaa7c4eeb moved the naming of the BlockBackend in
blockdev_init() to the end of the function, after I/O limits are set.
The consequence is that the throttling group gets an empty name.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-stable@nongnu.org
* backport of ff356ee
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 16:01:21 -05:00
David Hildenbrand 025c4e39f4 s390x/ipl: fix reboots for migration from different bios
When migrating from a different QEMU version, the start_address and
bios_start_address may differ. During migration these values are migrated
and overwrite the values that were detected by QEMU itself.

On a reboot, QEMU will reload its own BIOS, but use the migrated start
addresses, which does not work if the values differ.

Fix this by not relying on the migrated values anymore, but still
provide them during migration, so existing QEMUs continue to work.

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
(cherry picked from commit bb0995468a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 15:26:37 -05:00
Michael S. Tsirkin 82c8516779 Revert "virtio-net: unbreak self announcement and guest offloads after migration"
This reverts commit 1f8828ef57.

Cc: qemu-stable@nongnu.org
Reported-by: Robin Geuze <robing@transip.nl>
Tested-by: Robin Geuze <robing@transip.nl>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 6c6668232e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 15:23:40 -05:00
Michael S. Tsirkin 909d87d347 virtio: set low features early on load
virtio migrates the low 32 feature bits twice, the first copy is there
for compatibility but ever since
019a3edbb2: ("virtio: make features 64bit
wide") it's ignored on load. This is wrong since virtio_net_load tests
self announcement and guest offloads before the second copy including
high feature bits is loaded.  This means that self announcement, control
vq and guest offloads are all broken after migration.

Fix it up by loading low feature bits: somewhat ugly since high and low
bits become out of sync temporarily, but seems unavoidable for
compatibility.  The right thing to do for new features is probably to
test the host features, anyway.

Fixes: 019a3edbb2
    ("virtio: make features 64bit wide")
Cc: qemu-stable@nongnu.org
Reported-by: Robin Geuze <robing@transip.nl>
Tested-by: Robin Geuze <robing@transip.nl>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

(cherry picked from commit 62cee1a28a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 15:23:27 -05:00
Artyom Tarasenko 9566ceeef4 target-sparc: fix register corruption in ldstub if there is no write permission
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
(cherry picked from commit b64d2e57e7)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 15:10:07 -05:00
Eric Blake 44152ece75 scsi: Advertise limits by blocksize, not 512
s->blocksize may be larger than 512, in which case our
tweaks to max_xfer_len and opt_xfer_len must be scaled
appropriately.

CC: qemu-stable@nongnu.org
Reported-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit efaf4781a9)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 15:09:13 -05:00
Fam Zheng c9fb07ba56 scsi-generic: Merge block max xfer len in INQUIRY response
The rationale is similar to the above mode sense response interception:
this is practically the only channel to communicate restraints from
elsewhere such as host and block driver.

The scsi bus we attach onto can have a larger max xfer len than what is
accepted by the host file system (guarding between the host scsi LUN and
QEMU), in which case the SG_IO we generate would get -EINVAL.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1464243305-10661-3-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 063143d5b1)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 15:08:54 -05:00
Eric Blake ab2aac59e8 nbd: Allow larger requests
The NBD layer was breaking up request at a limit of 2040 sectors
(just under 1M) to cater to old qemu-nbd. But the server limit
was raised to 32M in commit 2d8214885 to match the kernel, more
than three years ago; and the upstream NBD Protocol is proposing
documentation that without any explicit communication to state
otherwise, a client should be able to safely assume that a 32M
transaction will work.  It is time to rely on the larger sizing,
and any downstream distro that cares about maximum
interoperability to older qemu-nbd servers can just tweak the
value of #define NBD_MAX_SECTORS.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

(cherry picked from commit 476b923c32)
Conflicts:
	include/block/nbd.h

* removed context dependency on 943cec86

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 14:34:45 -05:00
Alex Williamson e19b9ad27c vfio/pci: Fix VGA quirks
Commit 2d82f8a3cd ("vfio/pci: Convert all MemoryRegion to dynamic
alloc and consistent functions") converted VFIOPCIDevice.vga to be
dynamically allocted, negating the need for VFIOPCIDevice.has_vga.
Unfortunately not all of the has_vga users were converted, nor was
the field removed from the structure.  Correct these oversights.

Reported-by: Peter Maloney <peter.maloney@brockmann-consult.de>
Tested-by: Peter Maloney <peter.maloney@brockmann-consult.de>
Fixes: 2d82f8a3cd ("vfio/pci: Convert all MemoryRegion to dynamic alloc and consistent functions")
Fixes: https://bugs.launchpad.net/qemu/+bug/1591628
Cc: qemu-stable@nongnu.org
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
(cherry picked from commit 4d3fc4fdc6)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 14:30:32 -05:00
Lin Ma 4f696c8533 pci-assign: Move "Invalid ROM" error message to pci-assign-load-rom.c
In function pci_assign_dev_load_option_rom, For those pci devices don't
have 'rom' file under sysfs or if loading ROM from external file, The
function returns NULL, and won't set the passed 'size' variable.

In these 2 cases, qemu still reports "Invalid ROM" error message, Users
may be confused by it.

Signed-off-by: Lin Ma <lma@suse.com>
Message-Id: <1466010327-22368-1-git-send-email-lma@suse.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit be968c721e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 14:29:49 -05:00
Eric Blake a50bb5fd5f qapi: Fix crash on missing alternate member of QAPI struct
If a QAPI struct has a mandatory alternate member which is not
present on input, the input visitor reports an error for the
missing alternate without setting the discriminator, but the
cleanup code for the struct still tries to use the dealloc
visitor to clean up the alternate.

Commit dbf11922 changed visit_start_alternate to set *obj to NULL
when an error occurs, where it was previously left untouched.
Thus, before the patch, the dealloc visitor is blindly trying to
cleanup whatever branch corresponds to (*obj)->type == 0 (that is,
QTYPE_NONE, because *obj still pointed to zeroed memory), which
selects the default branch of the switch and sets an error, but
this second error is ignored by the way the dealloc visitor is
used; but after the patch, the attempt to switch dereferences NULL.

When cleaning up after a partial object parse, we specifically
check for !*obj after visit_start_struct() (see gen_visit_object());
doing the same for alternates fixes the crash. Enhance the testsuite
to give coverage for both missing struct and missing alternate
members.

Also add an abort - we expect visit_start_alternate() to either set an
error or to set (*obj)->type to a valid QType that corresponds to
actual user input, and QTYPE_NONE should never be reachable from valid
input.  Had the abort() been in place earlier, we might have noticed
the dealloc visitor dereferencing bogus zeroed memory prior to when
commit dbf11922 forced our hand by setting *obj to NULL and causing a
fault.

Test case:

{'execute':'blockdev-add', 'arguments':{'options':{'driver':'raw'}}}

The choice of 'driver':'raw' selects a BlockdevOptionsGenericFormat
struct, which has a mandatory 'file':'BlockdevRef' in QAPI.  Since
'file' is missing as a sibling of 'driver', this should report a
graceful error rather than fault.  After this patch, we are back to:

{"error": {"class": "GenericError", "desc": "Parameter 'file' is missing"}}

Generated code in qapi-visit.c changes as:

|@@ -2444,6 +2444,9 @@ void visit_type_BlockdevRef(Visitor *v,
|     if (err) {
|         goto out;
|     }
|+    if (!*obj) {
|+        goto out_obj;
|+    }
|     switch ((*obj)->type) {
|     case QTYPE_QDICT:
|         visit_start_struct(v, name, NULL, 0, &err);
|@@ -2459,10 +2462,13 @@ void visit_type_BlockdevRef(Visitor *v,
|     case QTYPE_QSTRING:
|         visit_type_str(v, name, &(*obj)->u.reference, &err);
|         break;
|+    case QTYPE_NONE:
|+        abort();
|     default:
|         error_setg(&err, QERR_INVALID_PARAMETER_TYPE, name ? name : "null",
|                    "BlockdevRef");
|     }
|+out_obj:
|     visit_end_alternate(v);

Reported by Kashyap Chamarthy <kchamart@redhat.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1466012271-5204-1-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>

(cherry picked from commit 9b4e38fe6a)
Conflicts:
	tests/test-qmp-input-visitor.c

* removed contexual/functional dependencies on 68ab47e

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 14:28:18 -05:00
Max Reitz 4bfe16ba7b qcow2: Avoid making the L1 table too big
We refuse to open images whose L1 table we deem "too big". Consequently,
we should not produce such images ourselves.

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20160615153630.2116-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
[mreitz: Added QEMU_BUILD_BUG_ON()]
Signed-off-by: Max Reitz <mreitz@redhat.com>

(cherry picked from commit 84c26520d3)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:55:23 -05:00
Kevin Wolf 683c1c5ea5 backup: Don't leak BackupBlockJob in error path
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
(cherry picked from commit 91ab688379)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:54:51 -05:00
Peter Lieven 45f4e4be09 net: fix qemu_announce_self not emitting packets
commit fefe2a78 accidently dropped the code path for injecting
raw packets. This feature is needed for sending gratuitous ARPs
after an incoming migration has completed. The result is increased
network downtime for vservers where the network card is not virtio-net
with the VIRTIO_NET_F_GUEST_ANNOUNCE feature.

Fixes: fefe2a78ab
Cc: qemu-stable@nongnu.org
Cc: hongyang.yang@easystack.cn
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit ca1ee3d6b5)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:45:18 -05:00
Daniel P. Berrange d1911a6fa7 ui: fix regression in printing VNC host/port on startup
If VNC is chosen as the compile time default display backend,
QEMU will print the host/port it listens on at startup.
Previously this would look like

  VNC server running on '::1:5900'

but in 04d2529da2 the ':' was
accidentally replaced with a ';'. This the ':' back.

Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1465382576-25552-1-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 83cf07b0b5)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:44:54 -05:00
Daniel P. Berrange 510531ea44 io: remove mistaken call to object_ref on QTask
The QTask struct is just a standalone struct, not a QOM Object,
so calling object_ref() on it is not appropriate. This results
in mangling the 'destroy' field in the QTask struct, causing
the later call to qtask_free() to try to call the function
at address 0x1, with predictably segfault happy results.

There is in fact no need for ref counting with QTask, as the
call to qtask_abort() or qtask_complete() will automatically
free associated memory.

This fixes the crash shown in

  https://bugs.launchpad.net/qemu/+bug/1589923

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit bc35d51077)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:44:29 -05:00
Gerd Hoffmann d59d37dea4 vmsvga: don't process more than 1024 fifo commands at once
vmsvga_fifo_run is called in regular intervals (on each display update)
and will resume where it left off.  So we can simply exit the loop,
without having to worry about how processing will continue.

Fixes: CVE-2016-4453
Cc: qemu-stable@nongnu.org
Cc: P J P <ppandit@redhat.com>
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1464592161-18348-5-git-send-email-kraxel@redhat.com
(cherry picked from commit 4e68a0ee17)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:37:49 -05:00
Gerd Hoffmann 71798fda8b vmsvga: shadow fifo registers
The fifo is normal ram.  So kvm vcpu threads and qemu iothread can
access the fifo in parallel without syncronization.  Which in turn
implies we can't use the fifo pointers in-place because the guest
can try changing them underneath us.  So add shadows for them, to
make sure the guest can't modify them after we've applied sanity
checks.

Fixes: CVE-2016-4454
Cc: qemu-stable@nongnu.org
Cc: P J P <ppandit@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1464592161-18348-4-git-send-email-kraxel@redhat.com
(cherry picked from commit 7e486f7577)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:37:40 -05:00
Gerd Hoffmann 3141be668f vmsvga: add more fifo checks
Make sure all fifo ptrs are within range.

Fixes: CVE-2016-4454
Cc: qemu-stable@nongnu.org
Cc: P J P <ppandit@redhat.com>
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1464592161-18348-3-git-send-email-kraxel@redhat.com
(cherry picked from commit c2e3c54d39)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:37:21 -05:00
Gerd Hoffmann 394647d711 vmsvga: move fifo sanity checks to vmsvga_fifo_length
Sanity checks are applied when the fifo is enabled by the guest
(SVGA_REG_CONFIG_DONE write).  Which doesn't help much if the guest
changes the fifo registers afterwards.  Move the checks to
vmsvga_fifo_length so they are done each time qemu is about to read
from the fifo.

Fixes: CVE-2016-4454
Cc: qemu-stable@nongnu.org
Cc: P J P <ppandit@redhat.com>
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1464592161-18348-2-git-send-email-kraxel@redhat.com
(cherry picked from commit 5213602678)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:37:08 -05:00
Fam Zheng 63a396d151 block: Drop bdrv_ioctl_bh_cb
Similar to the "!drv || !drv->bdrv_aio_ioctl" case above, here it is
okay to set co.ret and return. As pointed out by Paolo, a BH will be
created as necessary by the caller (bdrv_co_maybe_schedule_bh).
Besides, as pointed out by Kevin, "data" was leaked before.

Reported-by: Kevin Wolf <kwolf@redhat.com>
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20160601015223.19277-1-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit c8a9fd8071)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:33:39 -05:00
Prasad J Pandit f882993a8c scsi: mptsas: infinite loop while fetching requests
The LSI SAS1068 Host Bus Adapter emulator in Qemu, periodically
looks for requests and fetches them. A loop doing that in
mptsas_fetch_requests() could run infinitely if 's->state' was
not operational. Move check to avoid such a loop.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Cc: qemu-stable@nongnu.org
Message-Id: <1464077264-25473-1-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 06630554cc)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:32:04 -05:00
Prasad J Pandit 8b95d8e1d5 scsi: pvscsi: check command descriptor ring buffer size (CVE-2016-4952)
Vmware Paravirtual SCSI emulation uses command descriptors to
process SCSI commands. These descriptors come with their ring
buffers. A guest could set the ring buffer size to an arbitrary
value leading to OOB access issue. Add check to avoid it.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Cc: qemu-stable@nongnu.org
Message-Id: <1464000485-27041-1-git-send-email-ppandit@redhat.com>
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 3e831b40e0)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:31:47 -05:00
Steven Luo 54eb4cf5fc Fix configure test for PBKDF2 in nettle
On my Debian jessie system, including nettle/pbkdf2.h does not cause
NULL to be defined, which causes the test to fail to compile.  Include
stddef.h to bring in a definition of NULL.

Cc: qemu-trivial@nongnu.org
Cc: qemu-stable@nongnu.org
Signed-off-by: Steven Luo <steven+qemu@steven676.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 9e87a691bd)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:30:59 -05:00
Greg Kurz e81a24a748 savevm: fail if migration blockers are present
QEMU has currently two ways to prevent migration to occur:
- migration blocker when it depends on runtime state
- VMStateDescription.unmigratable when migration is not supported at all

This patch gathers all the logic into a single function to be called from
both the savevm and the migrate paths.

This fixes a bug with 9p, at least, where savevm would succeed and the
following would happen in the guest after loadvm:

$ ls /host
ls: cannot access /host: Protocol error

With this patch:

(qemu) savevm foo
Migration is disabled when VirtFS export path '/' is mounted in the guest
using mount_tag 'host'

Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <146239057139.11271.9011797645454781543.stgit@bahia.huguette.org>

[Update subject according to Paolo's suggestion - Amit]

Signed-off-by: Amit Shah <amit.shah@redhat.com>
(cherry picked from commit 24f3902b08)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:29:25 -05:00
Eric Blake fb26337641 nbd: Don't trim unrequested bytes
Similar to commit df7b97ff, we are mishandling clients that
give an unaligned NBD_CMD_TRIM request, and potentially
trimming bytes that occur before their request; which in turn
can cause potential unintended data loss (unlikely in
practice, since most clients are sane and issue aligned trim
requests).  However, while we fixed read and write by switching
to the byte interfaces of blk_, we don't yet have a byte
interface for discard.  On the other hand, trim is advisory, so
rounding the user's request to simply ignore the first and last
unaligned sectors (or the entire request, if it is sub-sector
in length) is just fine.

CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1464173965-9694-1-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 353ab96973)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:28:06 -05:00
Peter Lieven 509e13298f block/iscsi: avoid potential overflow of acb->task->cdb
at least in the path via virtio-blk the maximum size is not
restricted.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1464080368-29584-1-git-send-email-pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit a6b3167fa0)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:24:41 -05:00
Gavin Shan 6e7ee9862b vfio: Fix broken EEH
vfio_eeh_container_op() is the backend that communicates with
host kernel to support EEH functionality in QEMU. However, the
functon should return the value from host kernel instead of 0
unconditionally.

dwg: Specifically the problem occurs for the handful of EEH
sub-operations which can return a non-zero, non-error result.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
[dwg: clarification to commit message]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

(cherry picked from commit d917e88d85)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-05 13:23:19 -05:00
Gerd Hoffmann 7ff5dc445d vga: add sr_vbe register set
Commit "fd3c136 vga: make sure vga register setup for vbe stays intact
(CVE-2016-3712)." causes a regression.  The win7 installer is unhappy
because it can't freely modify vga registers any more while in vbe mode.

This patch introduces a new sr_vbe register set.  The vbe_update_vgaregs
will fill sr_vbe[] instead of sr[].  Normal vga register reads and
writes go to sr[].  Any sr register read access happens through a new
sr() helper function which will read from sr_vbe[] with vbe active and
from sr[] otherwise.

This way we can allow guests update sr[] registers as they want, without
allowing them disrupt vbe video modes that way.

Cc: qemu-stable@nongnu.org
Reported-by: Thomas Lamprecht <thomas@lamprecht.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1463475294-14119-1-git-send-email-kraxel@redhat.com
(cherry picked from commit 94ef4f337f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:46:46 -05:00
Thomas Huth a1f006fe93 usb/ohci: Fix crash with when specifying too many num-ports
QEMU currently crashes when an OHCI controller is instantiated with
too many ports, e.g. "-device pci-ohci,num-ports=100,masterbus=1".
Thus add a proper check in usb_ohci_init() to make sure that we
do not use more than OHCI_MAX_PORTS = 15 ports here.

Ticket: https://bugs.launchpad.net/qemu/+bug/1581308
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1463995387-11710-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit d400fc018b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:43:40 -05:00
Peter Lieven cba9a8042f block/nfs: refuse readahead if cache.direct is on
if we open a NFS export with disabled cache we should refuse
the readahead feature as it will cache data inside libnfs.

If a export was opened with readahead enabled it should
futher not be allowed to disable the cache while running.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1463662083-20814-2-git-send-email-pl@kamp.de
Signed-off-by: Jeff Cody <jcody@redhat.com>
(cherry picked from commit 38f8d5e025)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:42:32 -05:00
Prasad J Pandit 9b28a7fc88 esp: check dma length before reading scsi command(CVE-2016-4441)
The 53C9X Fast SCSI Controller(FSC) comes with an internal 16-byte
FIFO buffer. It is used to handle command and data transfer.
Routine get_cmd() uses DMA to read scsi commands into this buffer.
Add check to validate DMA length against buffer size to avoid any
overrun.

Fixes CVE-2016-4441.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Cc: qemu-stable@nongnu.org
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1463654371-11169-3-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 6c1fef6b59)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:42:05 -05:00
Prasad J Pandit 0a5e3685ea esp: check command buffer length before write(CVE-2016-4439)
The 53C9X Fast SCSI Controller(FSC) comes with an internal 16-byte
FIFO buffer. It is used to handle command and data transfer. While
writing to this command buffer 's->cmdbuf[TI_BUFSZ=16]', a check
was missing to validate input length. Add check to avoid OOB write
access.

Fixes CVE-2016-4439.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Cc: qemu-stable@nongnu.org
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1463654371-11169-2-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit c98c6c105f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:41:59 -05:00
Paolo Bonzini 2522f0fcd1 json-streamer: fix double-free on exiting during a parse
Now that json-streamer tries not to leak tokens on incomplete parse,
the tokens can be freed twice if QEMU destroys the json-streamer
object during the parser->emit call.  To fix this, create the new
empty GQueue earlier, so that it is already in place when the old
one is passed to parser->emit.

Reported-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1467636059-12557-1-git-send-email-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit a942d8fa01)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:34:29 -05:00
Eric Blake ebe0376e8c json-streamer: Don't leak tokens on incomplete parse
Valgrind complained about a number of leaks in
tests/check-qobject-json:

==12657==    definitely lost: 17,247 bytes in 1,234 blocks

All of which had the same root cause: on an incomplete parse,
we were abandoning the token queue without cleaning up the
allocated data within each queue element.  Introduced in
commit 95385fe, when we switched from QList (which recursively
frees contents) to g_queue (which does not).

We don't yet require glib 2.32 with its g_queue_free_full(),
so open-code it instead.

CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1463608012-12760-1-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
(cherry picked from commit ba4dba5434)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:34:10 -05:00
Greg Kurz 9520c6cb1f migration: regain control of images when migration fails to complete
We currently have an error path during migration that can cause
the source QEMU to abort:

migration_thread()
  migration_completion()
    runstate_is_running() ----------------> true if guest is running
    bdrv_inactivate_all() ----------------> inactivate images
    qemu_savevm_state_complete_precopy()
     ... qemu_fflush()
           socket_writev_buffer() --------> error because destination fails
         qemu_fflush() -------------------> set error on migration stream
  migration_completion() -----------------> set migrate state to FAILED
migration_thread() -----------------------> break migration loop
  vm_start() -----------------------------> restart guest with inactive
                                            images

and you get:

qemu-system-ppc64: socket_writev_buffer: Got err=104 for (32768/18446744073709551615)
qemu-system-ppc64: /home/greg/Work/qemu/qemu-master/block/io.c:1342:bdrv_co_do_pwritev: Assertion `!(bs->open_flags & 0x0800)' failed.
Aborted (core dumped)

If we try postcopy with a similar scenario, we also get the writev error
message but QEMU leaves the guest paused because entered_postcopy is true.

We could possibly do the same with precopy and leave the guest paused.
But since the historical default for migration errors is to restart the
source, this patch adds a call to bdrv_invalidate_cache_all() instead.

Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Message-Id: <146357896785.6003.11983081732454362715.stgit@bahia.huguette.org>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
(cherry picked from commit fe904ea824)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:31:03 -05:00
Stefan Weil dbbadeb48c configure: Allow builds with extra warnings
The clang compiler supports a useful compiler option -Weverything,
and GCC also has other warnings not enabled by -Wall.

If glib header files trigger a warning, however, testing glib with
-Werror will always fail. A size mismatch is also detected without
-Werror, so simply remove it.

Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <1461879221-13338-1-git-send-email-sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 5919e0328b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:30:30 -05:00
Paolo Bonzini bd5d278668 target-i386: key sfence availability on CPUID_SSE, not CPUID_SSE2
sfence was introduced before lfence and mfence.  This fixes Linux
2.4's measurement of checksumming speeds for the pIII_sse
algorithm:

md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
   8regs     :   384.400 MB/sec
   32regs    :   259.200 MB/sec
invalid operand: 0000
CPU:    0
EIP:    0010:[<c0240b2a>]    Not tainted
EFLAGS: 00000246
eax: c15d8000   ebx: 00000000   ecx: 00000000   edx: c15d5000
esi: 8005003b   edi: 00000004   ebp: 00000000   esp: c15bdf50
ds: 0018   es: 0018   ss: 0018
Process swapper (pid: 1, stackpage=c15bd000)
Stack: 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000
       00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000
       00000000 00000206 c0241c6c 00001000 c15d4000 c15d7000 c15d4000
c15d4000
Call Trace:    [<c0241c6c>] [<c0105000>] [<c0241db4>] [<c010503b>]
[<c0105000>]
  [<c0107416>] [<c0105030>]

Code: 0f ae f8 0f 10 04 24 0f 10 4c 24 10 0f 10 54 24 20 0f 10 5c
 <0>Kernel panic: Attempted to kill init!

Reported-by: Stefan Weil <sw@weilnetz.de>
Fixes: 121f315788
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 14cb949a3e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:29:06 -05:00
Aurelien Jarno a525decfaa target-mips: fix call to memset in soft reset code
Recent versions of GCC report the following error when compiling
target-mips/helper.c:

  qemu/target-mips/helper.c:542:9: warning: ‘memset’ used with length
  equal to number of elements without multiplication by element size
  [-Wmemset-elt-size]

This is indeed correct and due to a wrong usage of sizeof(). Fix that.

Cc: Stefan Weil <sw@weilnetz.de>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: qemu-stable@nongnu.org
LP: https://bugs.launchpad.net/qemu/+bug/1577841
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
(cherry picked from commit 9d989c732b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:27:40 -05:00
Roman Kagan 2cf1a1223b usb:xhci: no DMA on HC reset
This patch is a rough fix to a memory corruption we are observing when
running VMs with xhci USB controller and OVMF firmware.

Specifically, on the following call chain

xhci_reset
  xhci_disable_slot
    xhci_disable_ep
      xhci_set_ep_state

QEMU overwrites guest memory using stale guest addresses.

This doesn't happen when the guest (firmware) driver sets up xhci for
the first time as there are no slots configured yet.  However when the
firmware hands over the control to the OS some slots and endpoints are
already set up with their context in the guest RAM.  Now the OS' driver
resets the controller again and xhci_set_ep_state then reads and writes
that memory which is now owned by the OS.

As a quick fix, skip calling xhci_set_ep_state in xhci_disable_ep if the
device context base address array pointer is zero (indicating we're in
the HC reset and no DMA is possible).

Cc: qemu-stable@nongnu.org
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-id: 1462384435-1034-1-git-send-email-rkagan@virtuozzo.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 491d68d938)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:26:45 -05:00
Dominik Dingel ea819be42b exec.c: Ensure right alignment also for file backed ram
While in the anonymous ram case we already take care of the right alignment
such an alignment gurantee does not exist for file backed ram allocation.

Instead, pagesize is used for alignment. On s390 this is not enough for gmap,
as we need to satisfy an alignment up to segments.

Reported-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>

Message-Id: <1461585338-45863-1-git-send-email-dingel@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit d2f39add72)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:24:41 -05:00
Hemant Kumar 5a908cb1a8 tools: kvm_stat: Powerpc related fixes
kvm_stat script is failing to execute on powerpc :
 # ./kvm_stat
Traceback (most recent call last):
  File "./kvm_stat", line 825, in <module>
    main()
  File "./kvm_stat", line 813, in main
    providers = get_providers(options)
  File "./kvm_stat", line 778, in get_providers
    providers.append(TracepointProvider())
  File "./kvm_stat", line 416, in __init__
    self.filters = get_filters()
  File "./kvm_stat", line 315, in get_filters
    if ARCH.exit_reasons:
AttributeError: 'ArchPPC' object has no attribute 'exit_reasons'

This is because, its trying to access a non-defined attribute.

Also, the IOCTL number of RESET is incorrect for powerpc. The correct
number has been added.

Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* cherry-picked from linux commit c7d4fb5a
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:23:35 -05:00
Li Zhijian 07a3a482c3 vl: change runstate only if new state is different from current state
Previously, qemu will abort at following scenario:
(qemu) stop
(qemu) system_reset
(qemu) system_reset
(qemu) 2016-04-13T20:54:38.979158Z qemu-system-x86_64: invalid runstate transition: 'prelaunch' -> 'prelaunch'

Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1460604352-18630-1-git-send-email-lizhijian@cn.fujitsu.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit e92a2d9cb3)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:01:36 -05:00
Gerd Hoffmann 5b6c12e245 spice/gl: add & use qemu_spice_gl_monitor_config
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
(cherry picked from commit 39414ef4e9)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 16:00:18 -05:00
Prasad J Pandit d00ba3fa9b i386: kvmvapic: initialise imm32 variable
When processing Task Priorty Register(TPR) access, it could leak
automatic stack variable 'imm32' in patch_instruction().
Initialise the variable to avoid it.

Reported by: Donghai Zdh <donghai.zdh@alibaba-inc.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1460013608-16670-1-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

(cherry picked from commit 691a02e2ce)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-08-04 15:52:54 -05:00
105 changed files with 695 additions and 347 deletions
+1 -1
View File
@@ -1 +1 @@
2.6.0
2.6.1
+1 -1
View File
@@ -270,7 +270,7 @@ f_sample *mixeng_clip[2][2][2][3] = {
* August 21, 1998
* Copyright 1998 Fabrice Bellard.
*
* [Rewrote completly the code of Lance Norskog And Sundry
* [Rewrote completely the code of Lance Norskog And Sundry
* Contributors with a more efficient algorithm.]
*
* This source code is freely redistributable and may be used for
+1 -1
View File
@@ -898,7 +898,7 @@ static struct audio_option oss_options[] = {
.name = "EXCLUSIVE",
.tag = AUD_OPT_BOOL,
.valp = &glob_conf.exclusive,
.descr = "Open device in exclusive mode (vmix wont work)"
.descr = "Open device in exclusive mode (vmix won't work)"
},
#ifdef USE_DSP_POLICY
{
+5 -2
View File
@@ -504,6 +504,7 @@ void backup_start(BlockDriverState *bs, BlockDriverState *target,
{
int64_t len;
BlockDriverInfo bdi;
BackupBlockJob *job = NULL;
int ret;
assert(bs);
@@ -568,8 +569,7 @@ void backup_start(BlockDriverState *bs, BlockDriverState *target,
goto error;
}
BackupBlockJob *job = block_job_create(&backup_job_driver, bs, speed,
cb, opaque, errp);
job = block_job_create(&backup_job_driver, bs, speed, cb, opaque, errp);
if (!job) {
goto error;
}
@@ -610,4 +610,7 @@ void backup_start(BlockDriverState *bs, BlockDriverState *target,
if (sync_bitmap) {
bdrv_reclaim_dirty_bitmap(bs, sync_bitmap, NULL);
}
if (job) {
block_job_unref(&job->common);
}
}
+2 -18
View File
@@ -2595,19 +2595,6 @@ int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors)
return rwco.ret;
}
typedef struct {
CoroutineIOCompletion *co;
QEMUBH *bh;
} BdrvIoctlCompletionData;
static void bdrv_ioctl_bh_cb(void *opaque)
{
BdrvIoctlCompletionData *data = opaque;
bdrv_co_io_em_complete(data->co, -ENOTSUP);
qemu_bh_delete(data->bh);
}
static int bdrv_co_do_ioctl(BlockDriverState *bs, int req, void *buf)
{
BlockDriver *drv = bs->drv;
@@ -2625,11 +2612,8 @@ static int bdrv_co_do_ioctl(BlockDriverState *bs, int req, void *buf)
acb = drv->bdrv_aio_ioctl(bs, req, buf, bdrv_co_io_em_complete, &co);
if (!acb) {
BdrvIoctlCompletionData *data = g_new(BdrvIoctlCompletionData, 1);
data->bh = aio_bh_new(bdrv_get_aio_context(bs),
bdrv_ioctl_bh_cb, data);
data->co = &co;
qemu_bh_schedule(data->bh);
co.ret = -ENOTSUP;
goto out;
}
qemu_coroutine_yield();
out:
+12 -3
View File
@@ -425,12 +425,14 @@ static unsigned long *iscsi_allocationmap_init(IscsiLun *iscsilun)
static void iscsi_allocationmap_set(IscsiLun *iscsilun, int64_t sector_num,
int nb_sectors)
{
int64_t cluster_num, nb_clusters;
if (iscsilun->allocationmap == NULL) {
return;
}
bitmap_set(iscsilun->allocationmap,
sector_num / iscsilun->cluster_sectors,
DIV_ROUND_UP(nb_sectors, iscsilun->cluster_sectors));
cluster_num = sector_num / iscsilun->cluster_sectors;
nb_clusters = DIV_ROUND_UP(sector_num + nb_sectors,
iscsilun->cluster_sectors) - cluster_num;
bitmap_set(iscsilun->allocationmap, cluster_num, nb_clusters);
}
static void iscsi_allocationmap_clear(IscsiLun *iscsilun, int64_t sector_num,
@@ -837,6 +839,13 @@ static BlockAIOCB *iscsi_aio_ioctl(BlockDriverState *bs,
return &acb->common;
}
if (acb->ioh->cmd_len > SCSI_CDB_MAX_SIZE) {
error_report("iSCSI: ioctl error CDB exceeds max size (%d > %d)",
acb->ioh->cmd_len, SCSI_CDB_MAX_SIZE);
qemu_aio_unref(acb);
return NULL;
}
acb->task = malloc(sizeof(struct scsi_task));
if (acb->task == NULL) {
error_report("iSCSI: Failed to allocate task for scsi command. %s",
-4
View File
@@ -269,10 +269,6 @@ static int nbd_co_writev_1(BlockDriverState *bs, int64_t sector_num,
return -reply.error;
}
/* qemu-nbd has a limit of slightly less than 1M per request. Try to
* remain aligned to 4K. */
#define NBD_MAX_SECTORS 2040
int nbd_client_co_readv(BlockDriverState *bs, int64_t sector_num,
int nb_sectors, QEMUIOVector *qiov)
{
+1 -1
View File
@@ -20,7 +20,7 @@
typedef struct NbdClientSession {
QIOChannelSocket *sioc; /* The master data channel */
QIOChannel *ioc; /* The current I/O channel which may differ (eg TLS) */
uint32_t nbdflags;
uint16_t nbdflags;
off_t size;
CoMutex send_mutex;
+16 -4
View File
@@ -1,7 +1,7 @@
/*
* QEMU Block driver for native access to files on NFS shares
*
* Copyright (c) 2014 Peter Lieven <pl@kamp.de>
* Copyright (c) 2014-2016 Peter Lieven <pl@kamp.de>
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
@@ -47,6 +47,7 @@ typedef struct NFSClient {
bool has_zero_init;
AioContext *aio_context;
blkcnt_t st_blocks;
bool cache_used;
} NFSClient;
typedef struct NFSRPC {
@@ -278,7 +279,7 @@ static void nfs_file_close(BlockDriverState *bs)
}
static int64_t nfs_client_open(NFSClient *client, const char *filename,
int flags, Error **errp)
int flags, Error **errp, int open_flags)
{
int ret = -EINVAL, i;
struct stat st;
@@ -330,12 +331,18 @@ static int64_t nfs_client_open(NFSClient *client, const char *filename,
nfs_set_tcp_syncnt(client->context, val);
#ifdef LIBNFS_FEATURE_READAHEAD
} else if (!strcmp(qp->p[i].name, "readahead")) {
if (open_flags & BDRV_O_NOCACHE) {
error_setg(errp, "Cannot enable NFS readahead "
"if cache.direct = on");
goto fail;
}
if (val > QEMU_NFS_MAX_READAHEAD_SIZE) {
error_report("NFS Warning: Truncating NFS readahead"
" size to %d", QEMU_NFS_MAX_READAHEAD_SIZE);
val = QEMU_NFS_MAX_READAHEAD_SIZE;
}
nfs_set_readahead(client->context, val);
client->cache_used = true;
#endif
#ifdef LIBNFS_FEATURE_DEBUG
} else if (!strcmp(qp->p[i].name, "debug")) {
@@ -418,7 +425,7 @@ static int nfs_file_open(BlockDriverState *bs, QDict *options, int flags,
}
ret = nfs_client_open(client, qemu_opt_get(opts, "filename"),
(flags & BDRV_O_RDWR) ? O_RDWR : O_RDONLY,
errp);
errp, bs->open_flags);
if (ret < 0) {
goto out;
}
@@ -454,7 +461,7 @@ static int nfs_file_create(const char *url, QemuOpts *opts, Error **errp)
total_size = ROUND_UP(qemu_opt_get_size_del(opts, BLOCK_OPT_SIZE, 0),
BDRV_SECTOR_SIZE);
ret = nfs_client_open(client, url, O_CREAT, errp);
ret = nfs_client_open(client, url, O_CREAT, errp, 0);
if (ret < 0) {
goto out;
}
@@ -516,6 +523,11 @@ static int nfs_reopen_prepare(BDRVReopenState *state,
return -EACCES;
}
if ((state->flags & BDRV_O_NOCACHE) && client->cache_used) {
error_setg(errp, "Cannot disable cache if libnfs readahead is enabled");
return -EINVAL;
}
/* Update cache for read-only reopens */
if (!(state->flags & BDRV_O_RDWR)) {
ret = nfs_fstat(client->context, client->fh, &st);
+2 -1
View File
@@ -64,7 +64,8 @@ int qcow2_grow_l1_table(BlockDriverState *bs, uint64_t min_size,
}
}
if (new_l1_size > INT_MAX / sizeof(uint64_t)) {
QEMU_BUILD_BUG_ON(QCOW_MAX_L1_SIZE > INT_MAX);
if (new_l1_size > QCOW_MAX_L1_SIZE / sizeof(uint64_t)) {
return -EFBIG;
}
+6 -3
View File
@@ -481,6 +481,7 @@ static BlockBackend *blockdev_init(const char *file, QDict *bs_opts,
const char *id;
BlockdevDetectZeroesOptions detect_zeroes =
BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF;
const char *blk_id;
const char *throttling_group = NULL;
/* Check common options by copying from bs_opts to opts, all other options
@@ -510,6 +511,8 @@ static BlockBackend *blockdev_init(const char *file, QDict *bs_opts,
writethrough = !qemu_opt_get_bool(opts, BDRV_OPT_CACHE_WB, true);
blk_id = qemu_opts_id(opts);
qdict_extract_subqdict(bs_opts, &interval_dict, "stats-intervals.");
qdict_array_split(interval_dict, &interval_list);
@@ -579,7 +582,7 @@ static BlockBackend *blockdev_init(const char *file, QDict *bs_opts,
if (throttle_enabled(&cfg)) {
if (!throttling_group) {
throttling_group = blk_name(blk);
throttling_group = blk_id;
}
blk_rs->throttle_group = g_strdup(throttling_group);
blk_rs->throttle_state = throttle_group_incref(throttling_group);
@@ -614,7 +617,7 @@ static BlockBackend *blockdev_init(const char *file, QDict *bs_opts,
/* disk I/O throttling */
if (throttle_enabled(&cfg)) {
if (!throttling_group) {
throttling_group = blk_name(blk);
throttling_group = blk_id;
}
bdrv_io_limits_enable(bs, throttling_group);
bdrv_set_io_limits(bs, &cfg);
@@ -636,7 +639,7 @@ static BlockBackend *blockdev_init(const char *file, QDict *bs_opts,
blk_set_enable_write_cache(blk, !writethrough);
blk_set_on_error(blk, on_read_error, on_write_error);
if (!monitor_add_blk(blk, qemu_opts_id(opts), errp)) {
if (!monitor_add_blk(blk, blk_id, errp)) {
blk_unref(blk);
blk = NULL;
goto err_no_bs_opts;
Vendored
+2 -1
View File
@@ -2342,6 +2342,7 @@ if test "$nettle" != "no"; then
nettle="yes"
cat > $TMPC << EOF
#include <stddef.h>
#include <nettle/pbkdf2.h>
int main(void) {
pbkdf2_hmac_sha256(8, NULL, 1000, 8, NULL, 8, NULL);
@@ -2967,7 +2968,7 @@ int main(void) {
}
EOF
if ! compile_prog "-Werror $CFLAGS" "$LIBS" ; then
if ! compile_prog "$CFLAGS" "$LIBS" ; then
error_exit "sizeof(size_t) doesn't match GLIB_SIZEOF_SIZE_T."\
"You probably need to set PKG_CONFIG_LIBDIR"\
"to point to the right pkg-config files for your"\
+1 -1
View File
@@ -15,7 +15,7 @@
* unix socket. For each client, the server will create some eventfd
* (see EVENTFD(2)), one per vector. These fd are transmitted to all
* clients using the SCM_RIGHTS cmsg message. Therefore, each client is
* able to send a notification to another client without beeing
* able to send a notification to another client without being
* "profixied" by the server.
*
* We use this mechanism to send interruptions between guests.
+1 -1
View File
@@ -303,7 +303,7 @@ Endianness
----------
Device registers are hard-coded to little-endian (LE). The driver should
convert to/from host endianess to LE for device register accesses.
convert to/from host endianness to LE for device register accesses.
Descriptors are LE. Descriptor buffer TLVs will have LE type and length
fields, but the value field can either be LE or network-byte-order, depending
+1 -1
View File
@@ -10,7 +10,7 @@ Introduction
------------
QEMU includes a throttling module that can be used to set limits to
I/O operations. The code itself is generic and independent of the I/O
units, but it is currenly used to limit the number of bytes per second
units, but it is currently used to limit the number of bytes per second
and operations per second (IOPS) when performing disk I/O.
This document explains how to use the throttling code in QEMU, and how
+3 -2
View File
@@ -1296,7 +1296,7 @@ static void *file_ram_alloc(RAMBlock *block,
}
page_size = qemu_fd_getpagesize(fd);
block->mr->align = page_size;
block->mr->align = MAX(page_size, QEMU_VMALLOC_ALIGN);
if (memory < page_size) {
error_setg(errp, "memory size 0x" RAM_ADDR_FMT " must be equal to "
@@ -1317,7 +1317,8 @@ static void *file_ram_alloc(RAMBlock *block,
perror("ftruncate");
}
area = qemu_ram_mmap(fd, memory, page_size, block->flags & RAM_SHARED);
area = qemu_ram_mmap(fd, memory, block->mr->align,
block->flags & RAM_SHARED);
if (area == MAP_FAILED) {
error_setg_errno(errp, errno,
"unable to map backing store for guest RAM");
+5 -1
View File
@@ -1114,10 +1114,14 @@ static void machvirt_init(MachineState *machine)
* KVM is not available yet
*/
if (!gic_version) {
if (!kvm_enabled()) {
error_report("gic-version=host requires KVM");
exit(1);
}
gic_version = kvm_arm_vgic_probe();
if (!gic_version) {
error_report("Unable to determine GIC version supported by host");
error_printf("KVM acceleration is probably not supported\n");
exit(1);
}
}
+28 -22
View File
@@ -149,6 +149,11 @@ static inline bool vbe_enabled(VGACommonState *s)
return s->vbe_regs[VBE_DISPI_INDEX_ENABLE] & VBE_DISPI_ENABLED;
}
static inline uint8_t sr(VGACommonState *s, int idx)
{
return vbe_enabled(s) ? s->sr_vbe[idx] : s->sr[idx];
}
static void vga_update_memory_access(VGACommonState *s)
{
hwaddr base, offset, size;
@@ -163,8 +168,8 @@ static void vga_update_memory_access(VGACommonState *s)
s->has_chain4_alias = false;
s->plane_updated = 0xf;
}
if ((s->sr[VGA_SEQ_PLANE_WRITE] & VGA_SR02_ALL_PLANES) ==
VGA_SR02_ALL_PLANES && s->sr[VGA_SEQ_MEMORY_MODE] & VGA_SR04_CHN_4M) {
if ((sr(s, VGA_SEQ_PLANE_WRITE) & VGA_SR02_ALL_PLANES) ==
VGA_SR02_ALL_PLANES && sr(s, VGA_SEQ_MEMORY_MODE) & VGA_SR04_CHN_4M) {
offset = 0;
switch ((s->gr[VGA_GFX_MISC] >> 2) & 3) {
case 0:
@@ -234,7 +239,7 @@ static void vga_precise_update_retrace_info(VGACommonState *s)
((s->cr[VGA_CRTC_OVERFLOW] >> 6) & 2)) << 8);
vretr_end_line = s->cr[VGA_CRTC_V_SYNC_END] & 0xf;
clocking_mode = (s->sr[VGA_SEQ_CLOCK_MODE] >> 3) & 1;
clocking_mode = (sr(s, VGA_SEQ_CLOCK_MODE) >> 3) & 1;
clock_sel = (s->msr >> 2) & 3;
dots = (s->msr & 1) ? 8 : 9;
@@ -486,7 +491,6 @@ void vga_ioport_write(void *opaque, uint32_t addr, uint32_t val)
printf("vga: write SR%x = 0x%02x\n", s->sr_index, val);
#endif
s->sr[s->sr_index] = val & sr_mask[s->sr_index];
vbe_update_vgaregs(s);
if (s->sr_index == VGA_SEQ_CLOCK_MODE) {
s->update_retrace_info(s);
}
@@ -680,13 +684,13 @@ static void vbe_update_vgaregs(VGACommonState *s)
if (s->vbe_regs[VBE_DISPI_INDEX_BPP] == 4) {
shift_control = 0;
s->sr[VGA_SEQ_CLOCK_MODE] &= ~8; /* no double line */
s->sr_vbe[VGA_SEQ_CLOCK_MODE] &= ~8; /* no double line */
} else {
shift_control = 2;
/* set chain 4 mode */
s->sr[VGA_SEQ_MEMORY_MODE] |= VGA_SR04_CHN_4M;
s->sr_vbe[VGA_SEQ_MEMORY_MODE] |= VGA_SR04_CHN_4M;
/* activate all planes */
s->sr[VGA_SEQ_PLANE_WRITE] |= VGA_SR02_ALL_PLANES;
s->sr_vbe[VGA_SEQ_PLANE_WRITE] |= VGA_SR02_ALL_PLANES;
}
s->gr[VGA_GFX_MODE] = (s->gr[VGA_GFX_MODE] & ~0x60) |
(shift_control << 5);
@@ -836,7 +840,7 @@ uint32_t vga_mem_readb(VGACommonState *s, hwaddr addr)
break;
}
if (s->sr[VGA_SEQ_MEMORY_MODE] & VGA_SR04_CHN_4M) {
if (sr(s, VGA_SEQ_MEMORY_MODE) & VGA_SR04_CHN_4M) {
/* chain 4 mode : simplest access */
assert(addr < s->vram_size);
ret = s->vram_ptr[addr];
@@ -904,11 +908,11 @@ void vga_mem_writeb(VGACommonState *s, hwaddr addr, uint32_t val)
break;
}
if (s->sr[VGA_SEQ_MEMORY_MODE] & VGA_SR04_CHN_4M) {
if (sr(s, VGA_SEQ_MEMORY_MODE) & VGA_SR04_CHN_4M) {
/* chain 4 mode : simplest access */
plane = addr & 3;
mask = (1 << plane);
if (s->sr[VGA_SEQ_PLANE_WRITE] & mask) {
if (sr(s, VGA_SEQ_PLANE_WRITE) & mask) {
assert(addr < s->vram_size);
s->vram_ptr[addr] = val;
#ifdef DEBUG_VGA_MEM
@@ -921,7 +925,7 @@ void vga_mem_writeb(VGACommonState *s, hwaddr addr, uint32_t val)
/* odd/even mode (aka text mode mapping) */
plane = (s->gr[VGA_GFX_PLANE_READ] & 2) | (addr & 1);
mask = (1 << plane);
if (s->sr[VGA_SEQ_PLANE_WRITE] & mask) {
if (sr(s, VGA_SEQ_PLANE_WRITE) & mask) {
addr = ((addr & ~1) << 1) | plane;
if (addr >= s->vram_size) {
return;
@@ -996,7 +1000,7 @@ void vga_mem_writeb(VGACommonState *s, hwaddr addr, uint32_t val)
do_write:
/* mask data according to sr[2] */
mask = s->sr[VGA_SEQ_PLANE_WRITE];
mask = sr(s, VGA_SEQ_PLANE_WRITE);
s->plane_updated |= mask; /* only used to detect font change */
write_mask = mask16[mask];
if (addr * sizeof(uint32_t) >= s->vram_size) {
@@ -1152,10 +1156,10 @@ static void vga_get_text_resolution(VGACommonState *s, int *pwidth, int *pheight
/* total width & height */
cheight = (s->cr[VGA_CRTC_MAX_SCAN] & 0x1f) + 1;
cwidth = 8;
if (!(s->sr[VGA_SEQ_CLOCK_MODE] & VGA_SR01_CHAR_CLK_8DOTS)) {
if (!(sr(s, VGA_SEQ_CLOCK_MODE) & VGA_SR01_CHAR_CLK_8DOTS)) {
cwidth = 9;
}
if (s->sr[VGA_SEQ_CLOCK_MODE] & 0x08) {
if (sr(s, VGA_SEQ_CLOCK_MODE) & 0x08) {
cwidth = 16; /* NOTE: no 18 pixel wide */
}
width = (s->cr[VGA_CRTC_H_DISP] + 1);
@@ -1197,7 +1201,7 @@ static void vga_draw_text(VGACommonState *s, int full_update)
int64_t now = qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL);
/* compute font data address (in plane 2) */
v = s->sr[VGA_SEQ_CHARACTER_MAP];
v = sr(s, VGA_SEQ_CHARACTER_MAP);
offset = (((v >> 4) & 1) | ((v << 1) & 6)) * 8192 * 4 + 2;
if (offset != s->font_offsets[0]) {
s->font_offsets[0] = offset;
@@ -1506,11 +1510,11 @@ static void vga_draw_graphic(VGACommonState *s, int full_update)
}
if (shift_control == 0) {
if (s->sr[VGA_SEQ_CLOCK_MODE] & 8) {
if (sr(s, VGA_SEQ_CLOCK_MODE) & 8) {
disp_width <<= 1;
}
} else if (shift_control == 1) {
if (s->sr[VGA_SEQ_CLOCK_MODE] & 8) {
if (sr(s, VGA_SEQ_CLOCK_MODE) & 8) {
disp_width <<= 1;
}
}
@@ -1574,7 +1578,7 @@ static void vga_draw_graphic(VGACommonState *s, int full_update)
if (shift_control == 0) {
full_update |= update_palette16(s);
if (s->sr[VGA_SEQ_CLOCK_MODE] & 8) {
if (sr(s, VGA_SEQ_CLOCK_MODE) & 8) {
v = VGA_DRAW_LINE4D2;
} else {
v = VGA_DRAW_LINE4;
@@ -1582,7 +1586,7 @@ static void vga_draw_graphic(VGACommonState *s, int full_update)
bits = 4;
} else if (shift_control == 1) {
full_update |= update_palette16(s);
if (s->sr[VGA_SEQ_CLOCK_MODE] & 8) {
if (sr(s, VGA_SEQ_CLOCK_MODE) & 8) {
v = VGA_DRAW_LINE2D2;
} else {
v = VGA_DRAW_LINE2;
@@ -1629,7 +1633,7 @@ static void vga_draw_graphic(VGACommonState *s, int full_update)
#if 0
printf("w=%d h=%d v=%d line_offset=%d cr[0x09]=0x%02x cr[0x17]=0x%02x linecmp=%d sr[0x01]=0x%02x\n",
width, height, v, line_offset, s->cr[9], s->cr[VGA_CRTC_MODE],
s->line_compare, s->sr[VGA_SEQ_CLOCK_MODE]);
s->line_compare, sr(s, VGA_SEQ_CLOCK_MODE));
#endif
addr1 = (s->start_addr * 4);
bwidth = (width * bits + 7) / 8;
@@ -1781,6 +1785,7 @@ void vga_common_reset(VGACommonState *s)
{
s->sr_index = 0;
memset(s->sr, '\0', sizeof(s->sr));
memset(s->sr_vbe, '\0', sizeof(s->sr_vbe));
s->gr_index = 0;
memset(s->gr, '\0', sizeof(s->gr));
s->ar_index = 0;
@@ -1883,10 +1888,10 @@ static void vga_update_text(void *opaque, console_ch_t *chardata)
/* total width & height */
cheight = (s->cr[VGA_CRTC_MAX_SCAN] & 0x1f) + 1;
cw = 8;
if (!(s->sr[VGA_SEQ_CLOCK_MODE] & VGA_SR01_CHAR_CLK_8DOTS)) {
if (!(sr(s, VGA_SEQ_CLOCK_MODE) & VGA_SR01_CHAR_CLK_8DOTS)) {
cw = 9;
}
if (s->sr[VGA_SEQ_CLOCK_MODE] & 0x08) {
if (sr(s, VGA_SEQ_CLOCK_MODE) & 0x08) {
cw = 16; /* NOTE: no 18 pixel wide */
}
width = (s->cr[VGA_CRTC_H_DISP] + 1);
@@ -2053,6 +2058,7 @@ static int vga_common_post_load(void *opaque, int version_id)
/* force refresh */
s->graphic_mode = -1;
vbe_update_vgaregs(s);
return 0;
}
+1
View File
@@ -98,6 +98,7 @@ typedef struct VGACommonState {
MemoryRegion chain4_alias;
uint8_t sr_index;
uint8_t sr[256];
uint8_t sr_vbe[256];
uint8_t gr_index;
uint8_t gr[256];
uint8_t ar_index;
+41 -37
View File
@@ -66,17 +66,11 @@ struct vmsvga_state_s {
uint8_t *fifo_ptr;
unsigned int fifo_size;
union {
uint32_t *fifo;
struct QEMU_PACKED {
uint32_t min;
uint32_t max;
uint32_t next_cmd;
uint32_t stop;
/* Add registers here when adding capabilities. */
uint32_t fifo[0];
} *cmd;
};
uint32_t *fifo;
uint32_t fifo_min;
uint32_t fifo_max;
uint32_t fifo_next;
uint32_t fifo_stop;
#define REDRAW_FIFO_LEN 512
struct vmsvga_rect_s {
@@ -198,7 +192,7 @@ enum {
*/
SVGA_FIFO_MIN = 0,
SVGA_FIFO_MAX, /* The distance from MIN to MAX must be at least 10K */
SVGA_FIFO_NEXT_CMD,
SVGA_FIFO_NEXT,
SVGA_FIFO_STOP,
/*
@@ -546,8 +540,6 @@ static inline void vmsvga_cursor_define(struct vmsvga_state_s *s,
}
#endif
#define CMD(f) le32_to_cpu(s->cmd->f)
static inline int vmsvga_fifo_length(struct vmsvga_state_s *s)
{
int num;
@@ -555,21 +547,45 @@ static inline int vmsvga_fifo_length(struct vmsvga_state_s *s)
if (!s->config || !s->enable) {
return 0;
}
num = CMD(next_cmd) - CMD(stop);
s->fifo_min = le32_to_cpu(s->fifo[SVGA_FIFO_MIN]);
s->fifo_max = le32_to_cpu(s->fifo[SVGA_FIFO_MAX]);
s->fifo_next = le32_to_cpu(s->fifo[SVGA_FIFO_NEXT]);
s->fifo_stop = le32_to_cpu(s->fifo[SVGA_FIFO_STOP]);
/* Check range and alignment. */
if ((s->fifo_min | s->fifo_max | s->fifo_next | s->fifo_stop) & 3) {
return 0;
}
if (s->fifo_min < sizeof(uint32_t) * 4) {
return 0;
}
if (s->fifo_max > SVGA_FIFO_SIZE ||
s->fifo_min >= SVGA_FIFO_SIZE ||
s->fifo_stop >= SVGA_FIFO_SIZE ||
s->fifo_next >= SVGA_FIFO_SIZE) {
return 0;
}
if (s->fifo_max < s->fifo_min + 10 * 1024) {
return 0;
}
num = s->fifo_next - s->fifo_stop;
if (num < 0) {
num += CMD(max) - CMD(min);
num += s->fifo_max - s->fifo_min;
}
return num >> 2;
}
static inline uint32_t vmsvga_fifo_read_raw(struct vmsvga_state_s *s)
{
uint32_t cmd = s->fifo[CMD(stop) >> 2];
uint32_t cmd = s->fifo[s->fifo_stop >> 2];
s->cmd->stop = cpu_to_le32(CMD(stop) + 4);
if (CMD(stop) >= CMD(max)) {
s->cmd->stop = s->cmd->min;
s->fifo_stop += 4;
if (s->fifo_stop >= s->fifo_max) {
s->fifo_stop = s->fifo_min;
}
s->fifo[SVGA_FIFO_STOP] = cpu_to_le32(s->fifo_stop);
return cmd;
}
@@ -581,15 +597,15 @@ static inline uint32_t vmsvga_fifo_read(struct vmsvga_state_s *s)
static void vmsvga_fifo_run(struct vmsvga_state_s *s)
{
uint32_t cmd, colour;
int args, len;
int args, len, maxloop = 1024;
int x, y, dx, dy, width, height;
struct vmsvga_cursor_definition_s cursor;
uint32_t cmd_start;
len = vmsvga_fifo_length(s);
while (len > 0) {
while (len > 0 && --maxloop > 0) {
/* May need to go back to the start of the command if incomplete */
cmd_start = s->cmd->stop;
cmd_start = s->fifo_stop;
switch (cmd = vmsvga_fifo_read(s)) {
case SVGA_CMD_UPDATE:
@@ -748,7 +764,8 @@ static void vmsvga_fifo_run(struct vmsvga_state_s *s)
break;
rewind:
s->cmd->stop = cmd_start;
s->fifo_stop = cmd_start;
s->fifo[SVGA_FIFO_STOP] = cpu_to_le32(s->fifo_stop);
break;
}
}
@@ -1005,19 +1022,6 @@ static void vmsvga_value_write(void *opaque, uint32_t address, uint32_t value)
case SVGA_REG_CONFIG_DONE:
if (value) {
s->fifo = (uint32_t *) s->fifo_ptr;
/* Check range and alignment. */
if ((CMD(min) | CMD(max) | CMD(next_cmd) | CMD(stop)) & 3) {
break;
}
if (CMD(min) < (uint8_t *) s->cmd->fifo - (uint8_t *) s->fifo) {
break;
}
if (CMD(max) > SVGA_FIFO_SIZE) {
break;
}
if (CMD(max) < CMD(min) + 10 * 1024) {
break;
}
vga_dirty_log_stop(&s->vga);
}
s->config = !!value;
+1 -1
View File
@@ -247,7 +247,7 @@ static void imx_i2c_write(void *opaque, hwaddr offset,
if (s->address == ADDR_RESET) {
if (i2c_start_transfer(s->bus, extract32(s->i2dr_write, 1, 7),
extract32(s->i2dr_write, 0, 1))) {
/* if non zero is returned, the adress is not valid */
/* if non zero is returned, the address is not valid */
s->i2sr |= I2SR_RXAK;
} else {
s->address = s->i2dr_write;
-4
View File
@@ -1891,8 +1891,4 @@ static void assigned_dev_load_option_rom(AssignedDevice *dev)
pci_assign_dev_load_option_rom(&dev->dev, OBJECT(dev), &size,
dev->host.domain, dev->host.bus,
dev->host.slot, dev->host.function);
if (!size) {
error_report("pci-assign: Invalid ROM.");
}
}
+1 -1
View File
@@ -394,7 +394,7 @@ static void patch_instruction(VAPICROMState *s, X86CPU *cpu, target_ulong ip)
CPUX86State *env = &cpu->env;
VAPICHandlers *handlers;
uint8_t opcode[2];
uint32_t imm32;
uint32_t imm32 = 0;
target_ulong current_pc = 0;
target_ulong current_cs_base = 0;
int current_flags = 0;
+3
View File
@@ -40,6 +40,9 @@ void *pci_assign_dev_load_option_rom(PCIDevice *dev, struct Object *owner,
domain, bus, slot, function);
if (stat(rom_file, &st)) {
if (errno != ENOENT) {
error_report("pci-assign: Invalid ROM.");
}
return NULL;
}
+2 -2
View File
@@ -919,6 +919,7 @@ static void ncq_err(NCQTransferState *ncq_tfs)
ide_state->error = ABRT_ERR;
ide_state->status = READY_STAT | ERR_STAT;
ncq_tfs->drive->port_regs.scr_err |= (1 << ncq_tfs->tag);
qemu_sglist_destroy(&ncq_tfs->sglist);
ncq_tfs->used = 0;
}
@@ -1023,7 +1024,6 @@ static void execute_ncq_command(NCQTransferState *ncq_tfs)
default:
DPRINTF(port, "error: unsupported NCQ command (0x%02x) received\n",
ncq_tfs->cmd);
qemu_sglist_destroy(&ncq_tfs->sglist);
ncq_err(ncq_tfs);
}
}
@@ -1090,7 +1090,6 @@ static void process_ncq_command(AHCIState *s, int port, uint8_t *cmd_fis,
error_report("ahci: PRDT length for NCQ command (0x%zx) "
"is smaller than the requested size (0x%zx)",
ncq_tfs->sglist.size, size);
qemu_sglist_destroy(&ncq_tfs->sglist);
ncq_err(ncq_tfs);
ahci_trigger_irq(ad->hba, ad, PORT_IRQ_OVERFLOW);
return;
@@ -1476,6 +1475,7 @@ void ahci_realize(AHCIState *s, DeviceState *qdev, AddressSpace *as, int ports)
ad->port.dma->ops = &ahci_dma_ops;
ide_register_restart_cb(&ad->port);
}
g_free(irqs);
}
void ahci_uninit(AHCIState *s)
+1
View File
@@ -383,6 +383,7 @@ static void ide_atapi_cmd_read_dma_cb(void *opaque, int ret)
if (ret < 0) {
if (ide_handle_rw_error(s, -ret, ide_dma_cmd_to_retry(s->dma_cmd))) {
if (s->bus->error_status) {
s->bus->dma->aiocb = NULL;
return;
}
goto eot;
+2
View File
@@ -806,6 +806,8 @@ static void ide_dma_cb(void *opaque, int ret)
}
if (ret < 0) {
if (ide_handle_rw_error(s, -ret, ide_dma_cmd_to_retry(s->dma_cmd))) {
s->bus->dma->aiocb = NULL;
dma_buf_commit(s, 0);
return;
}
}
+1
View File
@@ -275,6 +275,7 @@ static void pmac_ide_atapi_transfer_cb(void *opaque, int ret)
/* Non-block ATAPI transfer - just copy to RAM */
s->io_buffer_size = MIN(s->io_buffer_size, io->len);
cpu_physical_memory_write(io->addr, s->io_buffer, s->io_buffer_size);
io->len = 0;
ide_atapi_cmd_ok(s);
m->dma_active = false;
goto done;
+3
View File
@@ -83,6 +83,9 @@ static ssize_t mipsnet_receive(NetClientState *nc, const uint8_t *buf, size_t si
if (!mipsnet_can_receive(nc))
return 0;
if (size >= sizeof(s->rx_buffer)) {
return 0;
}
s->busy = 1;
/* Just accept everything. */
+17 -23
View File
@@ -1542,33 +1542,11 @@ static int virtio_net_load(QEMUFile *f, void *opaque, int version_id)
{
VirtIONet *n = opaque;
VirtIODevice *vdev = VIRTIO_DEVICE(n);
int ret;
if (version_id < 2 || version_id > VIRTIO_NET_VM_VERSION)
return -EINVAL;
ret = virtio_load(vdev, f, version_id);
if (ret) {
return ret;
}
if (virtio_vdev_has_feature(vdev, VIRTIO_NET_F_CTRL_GUEST_OFFLOADS)) {
n->curr_guest_offloads = qemu_get_be64(f);
} else {
n->curr_guest_offloads = virtio_net_supported_guest_offloads(n);
}
if (peer_has_vnet_hdr(n)) {
virtio_net_apply_guest_offloads(n);
}
if (virtio_vdev_has_feature(vdev, VIRTIO_NET_F_GUEST_ANNOUNCE) &&
virtio_vdev_has_feature(vdev, VIRTIO_NET_F_CTRL_VQ)) {
n->announce_counter = SELF_ANNOUNCE_ROUNDS;
timer_mod(n->announce_timer, qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL));
}
return 0;
return virtio_load(vdev, f, version_id);
}
static int virtio_net_load_device(VirtIODevice *vdev, QEMUFile *f,
@@ -1665,6 +1643,16 @@ static int virtio_net_load_device(VirtIODevice *vdev, QEMUFile *f,
}
}
if (virtio_vdev_has_feature(vdev, VIRTIO_NET_F_CTRL_GUEST_OFFLOADS)) {
n->curr_guest_offloads = qemu_get_be64(f);
} else {
n->curr_guest_offloads = virtio_net_supported_guest_offloads(n);
}
if (peer_has_vnet_hdr(n)) {
virtio_net_apply_guest_offloads(n);
}
virtio_net_set_queues(n);
/* Find the first multicast entry in the saved MAC filter */
@@ -1682,6 +1670,12 @@ static int virtio_net_load_device(VirtIODevice *vdev, QEMUFile *f,
qemu_get_subqueue(n->nic, i)->link_down = link_down;
}
if (virtio_vdev_has_feature(vdev, VIRTIO_NET_F_GUEST_ANNOUNCE) &&
virtio_vdev_has_feature(vdev, VIRTIO_NET_F_CTRL_VQ)) {
n->announce_counter = SELF_ANNOUNCE_ROUNDS;
timer_mod(n->announce_timer, qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL));
}
return 0;
}
+2 -2
View File
@@ -37,7 +37,7 @@
#define VMXNET3_MSIX_BAR_SIZE 0x2000
#define MIN_BUF_SIZE 60
/* Compatability flags for migration */
/* Compatibility flags for migration */
#define VMXNET3_COMPAT_FLAG_OLD_MSI_OFFSETS_BIT 0
#define VMXNET3_COMPAT_FLAG_OLD_MSI_OFFSETS \
(1 << VMXNET3_COMPAT_FLAG_OLD_MSI_OFFSETS_BIT)
@@ -341,7 +341,7 @@ typedef struct {
uint32_t mcast_list_len;
uint32_t mcast_list_buff_size; /* needed for live migration. */
/* Compatability flags for migration */
/* Compatibility flags for migration */
uint32_t compat_flags;
} VMXNET3State;
+1 -1
View File
@@ -40,7 +40,7 @@
*
* Setting this flag to false will remove MSI/MSI-X capability from all devices.
*
* It is preferrable for controllers to set this to true (non-broken) even if
* It is preferable for controllers to set this to true (non-broken) even if
* they do not actually support MSI/MSI-X: guests normally probe the controller
* type and do not attempt to enable MSI/MSI-X with interrupt controllers not
* supporting such, so removing the capability is not required, and
+2
View File
@@ -62,6 +62,8 @@ static Property pci_props[] = {
QEMU_PCI_CAP_MULTIFUNCTION_BITNR, false),
DEFINE_PROP_BIT("command_serr_enable", PCIDevice, cap_present,
QEMU_PCI_CAP_SERR_BITNR, true),
DEFINE_PROP_BIT("x-pcie-lnksta-dllla", PCIDevice, cap_present,
QEMU_PCIE_LNKSTA_DLLLA_BITNR, true),
DEFINE_PROP_END_OF_LIST()
};
+1 -1
View File
@@ -116,7 +116,7 @@ pcibus_t pci_bridge_get_base(const PCIDevice *bridge, uint8_t type)
return base;
}
/* accessor funciton to get bridge filtering limit */
/* accessor function to get bridge filtering limit */
pcibus_t pci_bridge_get_limit(const PCIDevice *bridge, uint8_t type)
{
pcibus_t limit;
+14 -1
View File
@@ -47,6 +47,7 @@ int pcie_cap_init(PCIDevice *dev, uint8_t offset, uint8_t type, uint8_t port)
{
int pos;
uint8_t *exp_cap;
uint8_t *cmask;
assert(pci_is_express(dev));
@@ -57,6 +58,7 @@ int pcie_cap_init(PCIDevice *dev, uint8_t offset, uint8_t type, uint8_t port)
}
dev->exp.exp_cap = pos;
exp_cap = dev->config + pos;
cmask = dev->cmask + pos;
/* capability register
interrupt message number defaults to 0 */
@@ -80,7 +82,18 @@ int pcie_cap_init(PCIDevice *dev, uint8_t offset, uint8_t type, uint8_t port)
PCI_EXP_LNK_LS_25);
pci_set_word(exp_cap + PCI_EXP_LNKSTA,
PCI_EXP_LNK_MLW_1 | PCI_EXP_LNK_LS_25 |PCI_EXP_LNKSTA_DLLLA);
PCI_EXP_LNK_MLW_1 | PCI_EXP_LNK_LS_25);
if (dev->cap_present & QEMU_PCIE_LNKSTA_DLLLA) {
pci_word_test_and_set_mask(exp_cap + PCI_EXP_LNKSTA,
PCI_EXP_LNKSTA_DLLLA);
}
/* We changed link status bits over time, and changing them across
* migrations is generally fine as hardware changes them too.
* Let's not bother checking.
*/
pci_set_word(cmask + PCI_EXP_LNKSTA, 0);
pci_set_long(exp_cap + PCI_EXP_DEVCAP2,
PCI_EXP_DEVCAP2_EFF | PCI_EXP_DEVCAP2_EETLPP);
+9 -2
View File
@@ -47,8 +47,8 @@ static const VMStateDescription vmstate_ipl = {
.version_id = 0,
.minimum_version_id = 0,
.fields = (VMStateField[]) {
VMSTATE_UINT64(start_addr, S390IPLState),
VMSTATE_UINT64(bios_start_addr, S390IPLState),
VMSTATE_UINT64(compat_start_addr, S390IPLState),
VMSTATE_UINT64(compat_bios_start_addr, S390IPLState),
VMSTATE_STRUCT(iplb, S390IPLState, 0, vmstate_iplb, IplParameterBlock),
VMSTATE_BOOL(iplb_valid, S390IPLState),
VMSTATE_UINT8(cssid, S390IPLState),
@@ -170,6 +170,13 @@ static void s390_ipl_realize(DeviceState *dev, Error **errp)
stq_p(rom_ptr(INITRD_PARM_SIZE), initrd_size);
}
}
/*
* Don't ever use the migrated values, they could come from a different
* BIOS and therefore don't work. But still migrate the values, so
* QEMUs relying on it don't break.
*/
ipl->compat_start_addr = ipl->start_addr;
ipl->compat_bios_start_addr = ipl->bios_start_addr;
qemu_register_reset(qdev_reset_all_fn, dev);
error:
error_propagate(errp, err);
+2
View File
@@ -33,7 +33,9 @@ struct S390IPLState {
/*< private >*/
DeviceState parent_obj;
uint64_t start_addr;
uint64_t compat_start_addr;
uint64_t bios_start_addr;
uint64_t compat_bios_start_addr;
bool enforce_bios;
IplParameterBlock iplb;
bool iplb_valid;
+32 -25
View File
@@ -82,7 +82,7 @@ void esp_request_cancelled(SCSIRequest *req)
}
}
static uint32_t get_cmd(ESPState *s, uint8_t *buf)
static uint32_t get_cmd(ESPState *s, uint8_t *buf, uint8_t buflen)
{
uint32_t dmalen;
int target;
@@ -92,9 +92,15 @@ static uint32_t get_cmd(ESPState *s, uint8_t *buf)
dmalen = s->rregs[ESP_TCLO];
dmalen |= s->rregs[ESP_TCMID] << 8;
dmalen |= s->rregs[ESP_TCHI] << 16;
if (dmalen > buflen) {
return 0;
}
s->dma_memory_read(s->dma_opaque, buf, dmalen);
} else {
dmalen = s->ti_size;
if (dmalen > TI_BUFSZ) {
return 0;
}
memcpy(buf, s->ti_buf, dmalen);
buf[0] = buf[2] >> 5;
}
@@ -166,7 +172,7 @@ static void handle_satn(ESPState *s)
s->dma_cb = handle_satn;
return;
}
len = get_cmd(s, buf);
len = get_cmd(s, buf, sizeof(buf));
if (len)
do_cmd(s, buf);
}
@@ -180,7 +186,7 @@ static void handle_s_without_atn(ESPState *s)
s->dma_cb = handle_s_without_atn;
return;
}
len = get_cmd(s, buf);
len = get_cmd(s, buf, sizeof(buf));
if (len) {
do_busid_cmd(s, buf, 0);
}
@@ -192,7 +198,7 @@ static void handle_satn_stop(ESPState *s)
s->dma_cb = handle_satn_stop;
return;
}
s->cmdlen = get_cmd(s, s->cmdbuf);
s->cmdlen = get_cmd(s, s->cmdbuf, sizeof(s->cmdbuf));
if (s->cmdlen) {
trace_esp_handle_satn_stop(s->cmdlen);
s->do_cmd = 1;
@@ -216,7 +222,7 @@ static void write_response(ESPState *s)
} else {
s->ti_size = 2;
s->ti_rptr = 0;
s->ti_wptr = 0;
s->ti_wptr = 2;
s->rregs[ESP_RFLAGS] = 2;
}
esp_raise_irq(s);
@@ -239,15 +245,12 @@ static void esp_do_dma(ESPState *s)
uint32_t len;
int to_device;
to_device = (s->ti_size < 0);
len = s->dma_left;
if (s->do_cmd) {
trace_esp_do_dma(s->cmdlen, len);
assert (s->cmdlen <= sizeof(s->cmdbuf) &&
len <= sizeof(s->cmdbuf) - s->cmdlen);
s->dma_memory_read(s->dma_opaque, &s->cmdbuf[s->cmdlen], len);
s->ti_size = 0;
s->cmdlen = 0;
s->do_cmd = 0;
do_cmd(s, s->cmdbuf);
return;
}
if (s->async_len == 0) {
@@ -257,6 +260,7 @@ static void esp_do_dma(ESPState *s)
if (len > s->async_len) {
len = s->async_len;
}
to_device = (s->ti_size < 0);
if (to_device) {
s->dma_memory_read(s->dma_opaque, s->async_buf, len);
} else {
@@ -312,6 +316,7 @@ void esp_transfer_data(SCSIRequest *req, uint32_t len)
{
ESPState *s = req->hba_private;
assert(!s->do_cmd);
trace_esp_transfer_data(s->dma_left, s->ti_size);
s->async_len = len;
s->async_buf = scsi_req_get_buf(req);
@@ -342,7 +347,7 @@ static void handle_ti(ESPState *s)
s->dma_counter = dmalen;
if (s->do_cmd)
minlen = (dmalen < 32) ? dmalen : 32;
minlen = (dmalen < ESP_CMDBUF_SZ) ? dmalen : ESP_CMDBUF_SZ;
else if (s->ti_size < 0)
minlen = (dmalen < -s->ti_size) ? dmalen : -s->ti_size;
else
@@ -352,13 +357,13 @@ static void handle_ti(ESPState *s)
s->dma_left = minlen;
s->rregs[ESP_RSTAT] &= ~STAT_TC;
esp_do_dma(s);
} else if (s->do_cmd) {
}
if (s->do_cmd) {
trace_esp_handle_ti_cmd(s->cmdlen);
s->ti_size = 0;
s->cmdlen = 0;
s->do_cmd = 0;
do_cmd(s, s->cmdbuf);
return;
}
}
@@ -397,19 +402,17 @@ uint64_t esp_reg_read(ESPState *s, uint32_t saddr)
trace_esp_mem_readb(saddr, s->rregs[saddr]);
switch (saddr) {
case ESP_FIFO:
if (s->ti_size > 0) {
if ((s->rregs[ESP_RSTAT] & STAT_PIO_MASK) == 0) {
/* Data out. */
qemu_log_mask(LOG_UNIMP, "esp: PIO data read not implemented\n");
s->rregs[ESP_FIFO] = 0;
esp_raise_irq(s);
} else if (s->ti_rptr < s->ti_wptr) {
s->ti_size--;
if ((s->rregs[ESP_RSTAT] & STAT_PIO_MASK) == 0) {
/* Data out. */
qemu_log_mask(LOG_UNIMP,
"esp: PIO data read not implemented\n");
s->rregs[ESP_FIFO] = 0;
} else {
s->rregs[ESP_FIFO] = s->ti_buf[s->ti_rptr++];
}
s->rregs[ESP_FIFO] = s->ti_buf[s->ti_rptr++];
esp_raise_irq(s);
}
if (s->ti_size == 0) {
if (s->ti_rptr == s->ti_wptr) {
s->ti_rptr = 0;
s->ti_wptr = 0;
}
@@ -448,8 +451,12 @@ void esp_reg_write(ESPState *s, uint32_t saddr, uint64_t val)
break;
case ESP_FIFO:
if (s->do_cmd) {
s->cmdbuf[s->cmdlen++] = val & 0xff;
} else if (s->ti_size == TI_BUFSZ - 1) {
if (s->cmdlen < ESP_CMDBUF_SZ) {
s->cmdbuf[s->cmdlen++] = val & 0xff;
} else {
trace_esp_error_fifo_overrun();
}
} else if (s->ti_wptr == TI_BUFSZ - 1) {
trace_esp_error_fifo_overrun();
} else {
s->ti_size++;
+5 -2
View File
@@ -650,7 +650,9 @@ static int megasas_init_firmware(MegasasState *s, MegasasCmd *cmd)
pa_hi = le32_to_cpu(initq->pi_addr_hi);
s->producer_pa = ((uint64_t) pa_hi << 32) | pa_lo;
s->reply_queue_head = ldl_le_pci_dma(pcid, s->producer_pa);
s->reply_queue_head %= MEGASAS_MAX_FRAMES;
s->reply_queue_tail = ldl_le_pci_dma(pcid, s->consumer_pa);
s->reply_queue_tail %= MEGASAS_MAX_FRAMES;
flags = le32_to_cpu(initq->flags);
if (flags & MFI_QUEUE_FLAG_CONTEXT64) {
s->flags |= MEGASAS_MASK_USE_QUEUE64;
@@ -771,6 +773,7 @@ static int megasas_ctrl_get_info(MegasasState *s, MegasasCmd *cmd)
ptr = memory_region_get_ram_ptr(&pci_dev->rom);
memcpy(biosver, ptr + 0x41, 31);
biosver[31] = 0;
memcpy(info.image_component[1].name, "BIOS", 4);
memcpy(info.image_component[1].version, biosver,
strlen((const char *)biosver));
@@ -1293,7 +1296,7 @@ static int megasas_dcmd_ld_get_info(MegasasState *s, MegasasCmd *cmd)
static int megasas_dcmd_cfg_read(MegasasState *s, MegasasCmd *cmd)
{
uint8_t data[4096];
uint8_t data[4096] = { 0 };
struct mfi_config_data *info;
int num_pd_disks = 0, array_offset, ld_offset;
BusChild *kid;
@@ -1446,7 +1449,7 @@ static int megasas_dcmd_set_properties(MegasasState *s, MegasasCmd *cmd)
dcmd_size);
return MFI_STAT_INVALID_PARAMETER;
}
dma_buf_write((uint8_t *)&info, cmd->iov_size, &cmd->qsg);
dma_buf_write((uint8_t *)&info, dcmd_size, &cmd->qsg);
trace_megasas_dcmd_unsupported(cmd->index, cmd->iov_size);
return MFI_STAT_OK;
}
+4 -5
View File
@@ -754,11 +754,6 @@ static void mptsas_fetch_request(MPTSASState *s)
hwaddr addr;
int size;
if (s->state != MPI_IOC_STATE_OPERATIONAL) {
mptsas_set_fault(s, MPI_IOCSTATUS_INVALID_STATE);
return;
}
/* Read the message header from the guest first. */
addr = s->host_mfa_high_addr | MPTSAS_FIFO_GET(s, request_post);
pci_dma_read(pci, addr, req, sizeof(hdr));
@@ -789,6 +784,10 @@ static void mptsas_fetch_requests(void *opaque)
{
MPTSASState *s = opaque;
if (s->state != MPI_IOC_STATE_OPERATIONAL) {
mptsas_set_fault(s, MPI_IOCSTATUS_INVALID_STATE);
return;
}
while (!MPTSAS_FIFO_EMPTY(s, request_post)) {
mptsas_fetch_request(s);
}
+13
View File
@@ -222,6 +222,19 @@ static void scsi_read_complete(void * opaque, int ret)
r->buf[3] |= 0x80;
}
}
if (s->type == TYPE_DISK &&
r->req.cmd.buf[0] == INQUIRY &&
r->req.cmd.buf[2] == 0xb0) {
uint32_t max_xfer_len = blk_get_max_transfer_length(s->conf.blk) /
(s->blocksize / BDRV_SECTOR_SIZE);
if (max_xfer_len) {
stl_be_p(&r->buf[8], max_xfer_len);
/* Also take care of the opt xfer len. */
if (ldl_be_p(&r->buf[12]) > max_xfer_len) {
stl_be_p(&r->buf[12], max_xfer_len);
}
}
}
scsi_req_data(&r->req, len);
scsi_req_unref(&r->req);
}
+1 -1
View File
@@ -698,7 +698,7 @@ static void vscsi_inquiry_no_target(VSCSIState *s, vscsi_req *req)
uint8_t resp_data[36];
int rc, len, alen;
/* We dont do EVPD. Also check that page_code is 0 */
/* We don't do EVPD. Also check that page_code is 0 */
if ((cdb[1] & 0x01) || cdb[2] != 0) {
/* Send INVALID FIELD IN CDB */
vscsi_makeup_sense(s, req, ILLEGAL_REQUEST, 0x24, 0);
+21 -5
View File
@@ -63,7 +63,7 @@ typedef struct PVSCSIClass {
#define PVSCSI_DEVICE_GET_CLASS(obj) \
OBJECT_GET_CLASS(PVSCSIClass, (obj), TYPE_PVSCSI)
/* Compatability flags for migration */
/* Compatibility flags for migration */
#define PVSCSI_COMPAT_OLD_PCI_CONFIGURATION_BIT 0
#define PVSCSI_COMPAT_OLD_PCI_CONFIGURATION \
(1 << PVSCSI_COMPAT_OLD_PCI_CONFIGURATION_BIT)
@@ -153,7 +153,7 @@ pvscsi_log2(uint32_t input)
return log;
}
static void
static int
pvscsi_ring_init_data(PVSCSIRingInfo *m, PVSCSICmdDescSetupRings *ri)
{
int i;
@@ -161,6 +161,10 @@ pvscsi_ring_init_data(PVSCSIRingInfo *m, PVSCSICmdDescSetupRings *ri)
uint32_t req_ring_size, cmp_ring_size;
m->rs_pa = ri->ringsStatePPN << VMW_PAGE_SHIFT;
if ((ri->reqRingNumPages > PVSCSI_SETUP_RINGS_MAX_NUM_PAGES)
|| (ri->cmpRingNumPages > PVSCSI_SETUP_RINGS_MAX_NUM_PAGES)) {
return -1;
}
req_ring_size = ri->reqRingNumPages * PVSCSI_MAX_NUM_REQ_ENTRIES_PER_PAGE;
cmp_ring_size = ri->cmpRingNumPages * PVSCSI_MAX_NUM_CMP_ENTRIES_PER_PAGE;
txr_len_log2 = pvscsi_log2(req_ring_size - 1);
@@ -192,15 +196,20 @@ pvscsi_ring_init_data(PVSCSIRingInfo *m, PVSCSICmdDescSetupRings *ri)
/* Flush ring state page changes */
smp_wmb();
return 0;
}
static void
static int
pvscsi_ring_init_msg(PVSCSIRingInfo *m, PVSCSICmdDescSetupMsgRing *ri)
{
int i;
uint32_t len_log2;
uint32_t ring_size;
if (ri->numPages > PVSCSI_SETUP_MSG_RING_MAX_NUM_PAGES) {
return -1;
}
ring_size = ri->numPages * PVSCSI_MAX_NUM_MSG_ENTRIES_PER_PAGE;
len_log2 = pvscsi_log2(ring_size - 1);
@@ -220,6 +229,8 @@ pvscsi_ring_init_msg(PVSCSIRingInfo *m, PVSCSICmdDescSetupMsgRing *ri)
/* Flush ring state page changes */
smp_wmb();
return 0;
}
static void
@@ -770,7 +781,10 @@ pvscsi_on_cmd_setup_rings(PVSCSIState *s)
trace_pvscsi_on_cmd_arrived("PVSCSI_CMD_SETUP_RINGS");
pvscsi_dbg_dump_tx_rings_config(rc);
pvscsi_ring_init_data(&s->rings, rc);
if (pvscsi_ring_init_data(&s->rings, rc) < 0) {
return PVSCSI_COMMAND_PROCESSING_FAILED;
}
s->rings_info_valid = TRUE;
return PVSCSI_COMMAND_PROCESSING_SUCCEEDED;
}
@@ -850,7 +864,9 @@ pvscsi_on_cmd_setup_msg_ring(PVSCSIState *s)
}
if (s->rings_info_valid) {
pvscsi_ring_init_msg(&s->rings, rc);
if (pvscsi_ring_init_msg(&s->rings, rc) < 0) {
return PVSCSI_COMMAND_PROCESSING_FAILED;
}
s->msg_ring_info_valid = TRUE;
}
return sizeof(PVSCSICmdDescSetupMsgRing) / sizeof(uint32_t);
+1 -1
View File
@@ -184,7 +184,7 @@ static void a9_gtimer_write(void *opaque, hwaddr addr, uint64_t value,
case R_COUNTER_LO:
/*
* Keep it simple - ARM docco explicitly says to disable timer before
* modding it, so dont bother trying to do all the difficult on the fly
* modding it, so don't bother trying to do all the difficult on the fly
* timer modifications - (if they even work in real hardware??).
*/
if (s->control & R_CONTROL_TIMER_ENABLE) {
+2 -2
View File
@@ -187,7 +187,7 @@ static void aspeed_timer_set_value(AspeedTimerCtrlState *s, int timer, int reg,
}
/* Control register operations are broken out into helpers that can be
* explictly called on aspeed_timer_reset(), but also from
* explicitly called on aspeed_timer_reset(), but also from
* aspeed_timer_ctrl_op().
*/
@@ -380,7 +380,7 @@ static void aspeed_timer_reset(DeviceState *dev)
for (i = 0; i < ASPEED_TIMER_NR_TIMERS; i++) {
AspeedTimer *t = &s->timers[i];
/* Explictly call helpers to avoid any conditional behaviour through
/* Explicitly call helpers to avoid any conditional behaviour through
* aspeed_timer_set_ctrl().
*/
aspeed_timer_ctrl_enable(t, false);
+6
View File
@@ -1848,6 +1848,12 @@ static void usb_ohci_init(OHCIState *ohci, DeviceState *dev,
ohci->as = as;
if (num_ports > OHCI_MAX_PORTS) {
error_setg(errp, "OHCI num-ports=%d is too big (limit is %d ports)",
num_ports, OHCI_MAX_PORTS);
return;
}
if (usb_frame_time == 0) {
#ifdef OHCI_TIME_WARP
usb_frame_time = NANOSECONDS_PER_SECOND;
+4 -1
View File
@@ -1531,7 +1531,10 @@ static TRBCCode xhci_disable_ep(XHCIState *xhci, unsigned int slotid,
usb_packet_cleanup(&epctx->transfers[i].packet);
}
xhci_set_ep_state(xhci, epctx, NULL, EP_DISABLED);
/* only touch guest RAM if we're not resetting the HC */
if (xhci->dcbaap_low || xhci->dcbaap_high) {
xhci_set_ep_state(xhci, epctx, NULL, EP_DISABLED);
}
timer_free(epctx->kick_timer);
g_free(epctx);
+1 -1
View File
@@ -1147,7 +1147,7 @@ static int vfio_eeh_container_op(VFIOContainer *container, uint32_t op)
return -errno;
}
return 0;
return ret;
}
static VFIOContainer *vfio_eeh_as_container(AddressSpace *as)
+4 -4
View File
@@ -315,7 +315,7 @@ static void vfio_probe_ati_bar4_quirk(VFIOPCIDevice *vdev, int nr)
/* This windows doesn't seem to be used except by legacy VGA code */
if (!vfio_pci_is(vdev, PCI_VENDOR_ID_ATI, PCI_ANY_ID) ||
!vdev->has_vga || nr != 4) {
!vdev->vga || nr != 4) {
return;
}
@@ -363,7 +363,7 @@ static void vfio_probe_ati_bar2_quirk(VFIOPCIDevice *vdev, int nr)
/* Only enable on newer devices where BAR2 is 64bit */
if (!vfio_pci_is(vdev, PCI_VENDOR_ID_ATI, PCI_ANY_ID) ||
!vdev->has_vga || nr != 2 || !vdev->bars[2].mem64) {
!vdev->vga || nr != 2 || !vdev->bars[2].mem64) {
return;
}
@@ -657,7 +657,7 @@ static void vfio_probe_nvidia_bar5_quirk(VFIOPCIDevice *vdev, int nr)
VFIOConfigWindowQuirk *window;
if (!vfio_pci_is(vdev, PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID) ||
!vdev->has_vga || nr != 5) {
!vdev->vga || nr != 5) {
return;
}
@@ -773,7 +773,7 @@ static void vfio_probe_nvidia_bar0_quirk(VFIOPCIDevice *vdev, int nr)
QLIST_INSERT_HEAD(&vdev->bars[nr].quirks, quirk, next);
/* The 0x1800 offset mirror only seems to get used by legacy VGA */
if (vdev->has_vga) {
if (vdev->vga) {
quirk = g_malloc0(sizeof(*quirk));
mirror = quirk->data = g_malloc0(sizeof(*mirror));
mirror->mem = quirk->mem = g_new0(MemoryRegion, 1);
-1
View File
@@ -130,7 +130,6 @@ typedef struct VFIOPCIDevice {
#define VFIO_FEATURE_ENABLE_REQ (1 << VFIO_FEATURE_ENABLE_REQ_BIT)
int32_t bootindex;
uint8_t pm_cap;
bool has_vga;
bool pci_aer;
bool req_enabled;
bool has_flr;
+15
View File
@@ -561,6 +561,11 @@ void *virtqueue_pop(VirtQueue *vq, size_t sz)
max = vq->vring.num;
if (vq->inuse >= vq->vring.num) {
error_report("Virtqueue size exceeded");
exit(1);
}
i = head = virtqueue_get_head(vq, vq->last_avail_idx++);
if (virtio_vdev_has_feature(vdev, VIRTIO_RING_F_EVENT_IDX)) {
vring_set_avail_event(vq, vq->last_avail_idx);
@@ -1506,6 +1511,16 @@ int virtio_load(VirtIODevice *vdev, QEMUFile *f, int version_id)
}
qemu_get_be32s(f, &features);
/*
* Temporarily set guest_features low bits - needed by
* virtio net load code testing for VIRTIO_NET_F_CTRL_GUEST_OFFLOADS
* VIRTIO_NET_F_GUEST_ANNOUNCE and VIRTIO_NET_F_CTRL_VQ.
*
* Note: devices should always test host features in future - don't create
* new dependencies like this.
*/
vdev->guest_features = features;
config_len = qemu_get_be32(f);
/*
+1 -1
View File
@@ -842,7 +842,7 @@ static void xen_pt_realize(PCIDevice *d, Error **errp)
goto err_out;
}
if (!scratch) {
error_setg(errp, "no pin interrupt");
XEN_PT_LOG(d, "no pin interrupt\n");
goto out;
}
+4 -3
View File
@@ -76,6 +76,7 @@ enum {
/* Maximum size of a single READ/WRITE data buffer */
#define NBD_MAX_BUFFER_SIZE (32 * 1024 * 1024)
#define NBD_MAX_SECTORS (NBD_MAX_BUFFER_SIZE / BDRV_SECTOR_SIZE)
ssize_t nbd_wr_syncv(QIOChannel *ioc,
struct iovec *iov,
@@ -83,11 +84,11 @@ ssize_t nbd_wr_syncv(QIOChannel *ioc,
size_t offset,
size_t length,
bool do_read);
int nbd_receive_negotiate(QIOChannel *ioc, const char *name, uint32_t *flags,
int nbd_receive_negotiate(QIOChannel *ioc, const char *name, uint16_t *flags,
QCryptoTLSCreds *tlscreds, const char *hostname,
QIOChannel **outioc,
off_t *size, Error **errp);
int nbd_init(int fd, QIOChannelSocket *sioc, uint32_t flags, off_t size);
int nbd_init(int fd, QIOChannelSocket *sioc, uint16_t flags, off_t size);
ssize_t nbd_send_request(QIOChannel *ioc, struct nbd_request *request);
ssize_t nbd_receive_reply(QIOChannel *ioc, struct nbd_reply *reply);
int nbd_client(int fd);
@@ -97,7 +98,7 @@ typedef struct NBDExport NBDExport;
typedef struct NBDClient NBDClient;
NBDExport *nbd_export_new(BlockBackend *blk, off_t dev_offset, off_t size,
uint32_t nbdflags, void (*close)(NBDExport *),
uint16_t nbdflags, void (*close)(NBDExport *),
Error **errp);
void nbd_export_close(NBDExport *exp);
void nbd_export_get(NBDExport *exp);
+1 -1
View File
@@ -34,7 +34,7 @@
* Fill @buf with @buflen bytes of cryptographically strong
* random data
*
* Returns 0 on sucess, -1 on error
* Returns 0 on success, -1 on error
*/
int qcrypto_random_bytes(uint8_t *buf,
size_t buflen,
+4
View File
@@ -73,6 +73,10 @@
.driver = "virtio-rng-pci",\
.property = "any_layout",\
.value = "off",\
},{\
.driver = TYPE_PCI_DEVICE,\
.property = "x-pcie-lnksta-dllla",\
.value = "off",\
},
#define HW_COMPAT_2_2 \
+3
View File
@@ -173,6 +173,9 @@ enum {
/* PCI Express capability - Power Controller Present */
#define QEMU_PCIE_SLTCAP_PCP_BITNR 7
QEMU_PCIE_SLTCAP_PCP = (1 << QEMU_PCIE_SLTCAP_PCP_BITNR),
/* Link active status in endpoint capability is always set */
#define QEMU_PCIE_LNKSTA_DLLLA_BITNR 8
QEMU_PCIE_LNKSTA_DLLLA = (1 << QEMU_PCIE_LNKSTA_DLLLA_BITNR),
};
#define TYPE_PCI_DEVICE "pci-device"
+2 -1
View File
@@ -14,6 +14,7 @@ void esp_init(hwaddr espaddr, int it_shift,
#define ESP_REGS 16
#define TI_BUFSZ 16
#define ESP_CMDBUF_SZ 32
typedef struct ESPState ESPState;
@@ -31,7 +32,7 @@ struct ESPState {
SCSIBus bus;
SCSIDevice *current_dev;
SCSIRequest *current_req;
uint8_t cmdbuf[TI_BUFSZ];
uint8_t cmdbuf[ESP_CMDBUF_SZ];
uint32_t cmdlen;
uint32_t do_cmd;
+1 -1
View File
@@ -26,7 +26,7 @@
* We don't support Xen prior to 4.2.0.
*/
/* Xen 4.2 thru 4.6 */
/* Xen 4.2 through 4.6 */
#if CONFIG_XEN_CTRL_INTERFACE_VERSION < 471
typedef xc_interface xenforeignmemory_handle;
+1 -1
View File
@@ -219,7 +219,7 @@ void qio_task_run_in_thread(QIOTask *task,
* qio_task_complete:
* @task: the task struct
*
* Mark the operation as succesfully completed
* Mark the operation as successfully completed
* and free the memory for @task.
*/
void qio_task_complete(QIOTask *task);
+1
View File
@@ -210,6 +210,7 @@ int migrate_fd_close(MigrationState *s);
void add_migration_state_change_notifier(Notifier *notify);
void remove_migration_state_change_notifier(Notifier *notify);
MigrationState *migrate_init(const MigrationParams *params);
bool migration_is_blocked(Error **errp);
bool migration_in_setup(MigrationState *);
bool migration_has_finished(MigrationState *);
bool migration_has_failed(MigrationState *);
+16 -2
View File
@@ -149,7 +149,8 @@ extern int daemon(int, int);
/* Minimum function that returns zero only iff both values are zero.
* Intended for use with unsigned values only. */
#ifndef MIN_NON_ZERO
#define MIN_NON_ZERO(a, b) (((a) != 0 && (a) < (b)) ? (a) : (b))
#define MIN_NON_ZERO(a, b) ((a) == 0 ? (b) : \
((b) == 0 ? (a) : (MIN(a, b))))
#endif
/* Round number down to multiple */
@@ -247,6 +248,19 @@ void qemu_anon_ram_free(void *ptr, size_t size);
#endif
#if defined(__linux__) && \
(defined(__x86_64__) || defined(__arm__) || defined(__aarch64__))
/* Use 2 MiB alignment so transparent hugepages can be used by KVM.
Valgrind does not support alignments larger than 1 MiB,
therefore we need special code which handles running on Valgrind. */
# define QEMU_VMALLOC_ALIGN (512 * 4096)
#elif defined(__linux__) && defined(__s390x__)
/* Use 1 MiB (segment size) alignment so gmap can be used by KVM. */
# define QEMU_VMALLOC_ALIGN (256 * 4096)
#else
# define QEMU_VMALLOC_ALIGN getpagesize()
#endif
int qemu_madvise(void *addr, size_t len, int advice);
int qemu_open(const char *name, int flags, ...);
@@ -299,7 +313,7 @@ static inline void qemu_timersub(const struct timeval *val1,
void qemu_set_cloexec(int fd);
/* QEMU "hardware version" setting. Used to replace code that exposed
* QEMU_VERSION to guests in the past and need to keep compatibilty.
* QEMU_VERSION to guests in the past and need to keep compatibility.
* Do not use qemu_hw_version() in new code.
*/
void qemu_set_hw_version(const char *);
+1
View File
@@ -71,6 +71,7 @@ typedef struct QXLCookie {
QXLRect area;
int redraw;
} render;
void *data;
} u;
} QXLCookie;
+1 -2
View File
@@ -316,14 +316,13 @@ static gboolean qio_channel_websock_handshake_io(QIOChannel *ioc,
return TRUE;
}
object_ref(OBJECT(task));
trace_qio_channel_websock_handshake_reply(ioc);
qio_channel_add_watch(
wioc->master,
G_IO_OUT,
qio_channel_websock_handshake_send,
task,
(GDestroyNotify)object_unref);
NULL);
return FALSE;
}
+1 -1
View File
@@ -413,7 +413,7 @@ static int kvm_physical_sync_dirty_bitmap(KVMMemoryListener *kml,
* userspace memory corruption (which is not detectable by valgrind
* too, in most cases).
* So for now, let's align to 64 instead of HOST_LONG_BITS here, in
* a hope that sizeof(long) wont become >8 any time soon.
* a hope that sizeof(long) won't become >8 any time soon.
*/
size = ALIGN(((mem->memory_size) >> TARGET_PAGE_BITS),
/*HOST_LONG_BITS*/ 64) / 8;
+31 -9
View File
@@ -278,7 +278,7 @@ static void deferred_incoming_migration(Error **errp)
void migrate_send_rp_req_pages(MigrationIncomingState *mis, const char *rbname,
ram_addr_t start, size_t len)
{
uint8_t bufc[12 + 1 + 255]; /* start (8), len (4), rbname upto 256 */
uint8_t bufc[12 + 1 + 255]; /* start (8), len (4), rbname up to 256 */
size_t msglen = 12; /* start + len */
*(uint64_t *)bufc = cpu_to_be64((uint64_t)start);
@@ -992,6 +992,20 @@ void qmp_migrate_incoming(const char *uri, Error **errp)
once = false;
}
bool migration_is_blocked(Error **errp)
{
if (qemu_savevm_state_blocked(errp)) {
return true;
}
if (migration_blockers) {
*errp = error_copy(migration_blockers->data);
return true;
}
return false;
}
void qmp_migrate(const char *uri, bool has_blk, bool blk,
bool has_inc, bool inc, bool has_detach, bool detach,
Error **errp)
@@ -1014,12 +1028,7 @@ void qmp_migrate(const char *uri, bool has_blk, bool blk,
return;
}
if (qemu_savevm_state_blocked(errp)) {
return;
}
if (migration_blockers) {
*errp = error_copy(migration_blockers->data);
if (migration_is_blocked(errp)) {
return;
}
@@ -1597,19 +1606,32 @@ static void migration_completion(MigrationState *s, int current_active_state,
rp_error = await_return_path_close_on_source(s);
trace_migration_completion_postcopy_end_after_rp(rp_error);
if (rp_error) {
goto fail;
goto fail_invalidate;
}
}
if (qemu_file_get_error(s->to_dst_file)) {
trace_migration_completion_file_err();
goto fail;
goto fail_invalidate;
}
migrate_set_state(&s->state, current_active_state,
MIGRATION_STATUS_COMPLETED);
return;
fail_invalidate:
/* If not doing postcopy, vm_start() will be called: let's regain
* control on images.
*/
if (s->state == MIGRATION_STATUS_ACTIVE) {
Error *local_err = NULL;
bdrv_invalidate_cache_all(&local_err);
if (local_err) {
error_report_err(local_err);
}
}
fail:
migrate_set_state(&s->state, current_active_state,
MIGRATION_STATUS_FAILED);
+1 -1
View File
@@ -1272,7 +1272,7 @@ static int ram_save_target_page(MigrationState *ms, QEMUFile *f,
}
/**
* ram_save_host_page: Starting at *offset send pages upto the end
* ram_save_host_page: Starting at *offset send pages up to the end
* of the current host page. It's valid for the initial
* offset to point into the middle of a host page
* in which case the remainder of the hostpage is sent.
+1 -1
View File
@@ -1169,7 +1169,7 @@ static int qemu_savevm_state(QEMUFile *f, Error **errp)
MigrationState *ms = migrate_init(&params);
ms->to_dst_file = f;
if (qemu_savevm_state_blocked(errp)) {
if (migration_is_blocked(errp)) {
return -EINVAL;
}
+39 -34
View File
@@ -109,25 +109,27 @@ static int nbd_handle_reply_err(QIOChannel *ioc, uint32_t opt, uint32_t type,
switch (type) {
case NBD_REP_ERR_UNSUP:
TRACE("server doesn't understand request %d, attempting fallback",
opt);
TRACE("server doesn't understand request %" PRIx32
", attempting fallback", opt);
result = 0;
goto cleanup;
case NBD_REP_ERR_POLICY:
error_setg(errp, "Denied by server for option %x", opt);
error_setg(errp, "Denied by server for option %" PRIx32, opt);
break;
case NBD_REP_ERR_INVALID:
error_setg(errp, "Invalid data length for option %x", opt);
error_setg(errp, "Invalid data length for option %" PRIx32, opt);
break;
case NBD_REP_ERR_TLS_REQD:
error_setg(errp, "TLS negotiation required before option %x", opt);
error_setg(errp, "TLS negotiation required before option %" PRIx32,
opt);
break;
default:
error_setg(errp, "Unknown error code when asking for option %x", opt);
error_setg(errp, "Unknown error code when asking for option %" PRIx32,
opt);
break;
}
@@ -165,7 +167,7 @@ static int nbd_receive_list(QIOChannel *ioc, char **name, Error **errp)
}
opt = be32_to_cpu(opt);
if (opt != NBD_OPT_LIST) {
error_setg(errp, "Unexpected option type %x expected %x",
error_setg(errp, "Unexpected option type %" PRIx32 " expected %x",
opt, NBD_OPT_LIST);
return -1;
}
@@ -207,7 +209,7 @@ static int nbd_receive_list(QIOChannel *ioc, char **name, Error **errp)
return -1;
}
if (namelen > 255) {
error_setg(errp, "export name length too long %d", namelen);
error_setg(errp, "export name length too long %" PRIu32, namelen);
return -1;
}
@@ -234,7 +236,7 @@ static int nbd_receive_list(QIOChannel *ioc, char **name, Error **errp)
g_free(buf);
}
} else {
error_setg(errp, "Unexpected reply type %x expected %x",
error_setg(errp, "Unexpected reply type %" PRIx32 " expected %x",
type, NBD_REP_SERVER);
return -1;
}
@@ -349,7 +351,7 @@ static QIOChannel *nbd_receive_starttls(QIOChannel *ioc,
}
opt = be32_to_cpu(opt);
if (opt != NBD_OPT_STARTTLS) {
error_setg(errp, "Unexpected option type %x expected %x",
error_setg(errp, "Unexpected option type %" PRIx32 " expected %x",
opt, NBD_OPT_STARTTLS);
return NULL;
}
@@ -361,7 +363,7 @@ static QIOChannel *nbd_receive_starttls(QIOChannel *ioc,
}
type = be32_to_cpu(type);
if (type != NBD_REP_ACK) {
error_setg(errp, "Server rejected request to start TLS %x",
error_setg(errp, "Server rejected request to start TLS %" PRIx32,
type);
return NULL;
}
@@ -373,7 +375,7 @@ static QIOChannel *nbd_receive_starttls(QIOChannel *ioc,
}
length = be32_to_cpu(length);
if (length != 0) {
error_setg(errp, "Start TLS reponse was not zero %x",
error_setg(errp, "Start TLS response was not zero %" PRIu32,
length);
return NULL;
}
@@ -384,7 +386,7 @@ static QIOChannel *nbd_receive_starttls(QIOChannel *ioc,
return NULL;
}
data.loop = g_main_loop_new(g_main_context_default(), FALSE);
TRACE("Starting TLS hanshake");
TRACE("Starting TLS handshake");
qio_channel_tls_handshake(tioc,
nbd_tls_handshake,
&data,
@@ -404,7 +406,7 @@ static QIOChannel *nbd_receive_starttls(QIOChannel *ioc,
}
int nbd_receive_negotiate(QIOChannel *ioc, const char *name, uint32_t *flags,
int nbd_receive_negotiate(QIOChannel *ioc, const char *name, uint16_t *flags,
QCryptoTLSCreds *tlscreds, const char *hostname,
QIOChannel **outioc,
off_t *size, Error **errp)
@@ -464,7 +466,6 @@ int nbd_receive_negotiate(QIOChannel *ioc, const char *name, uint32_t *flags,
uint32_t opt;
uint32_t namesize;
uint16_t globalflags;
uint16_t exportflags;
bool fixedNewStyle = false;
if (read_sync(ioc, &globalflags, sizeof(globalflags)) !=
@@ -473,8 +474,7 @@ int nbd_receive_negotiate(QIOChannel *ioc, const char *name, uint32_t *flags,
goto fail;
}
globalflags = be16_to_cpu(globalflags);
*flags = globalflags << 16;
TRACE("Global flags are %x", globalflags);
TRACE("Global flags are %" PRIx32, globalflags);
if (globalflags & NBD_FLAG_FIXED_NEWSTYLE) {
fixedNewStyle = true;
TRACE("Server supports fixed new style");
@@ -541,17 +541,15 @@ int nbd_receive_negotiate(QIOChannel *ioc, const char *name, uint32_t *flags,
goto fail;
}
*size = be64_to_cpu(s);
TRACE("Size is %" PRIu64, *size);
if (read_sync(ioc, &exportflags, sizeof(exportflags)) !=
sizeof(exportflags)) {
if (read_sync(ioc, flags, sizeof(*flags)) != sizeof(*flags)) {
error_setg(errp, "Failed to read export flags");
goto fail;
}
exportflags = be16_to_cpu(exportflags);
*flags |= exportflags;
TRACE("Export flags are %x", exportflags);
be16_to_cpus(flags);
} else if (magic == NBD_CLIENT_MAGIC) {
uint32_t oldflags;
if (name) {
error_setg(errp, "Server does not support export names");
goto fail;
@@ -568,16 +566,22 @@ int nbd_receive_negotiate(QIOChannel *ioc, const char *name, uint32_t *flags,
*size = be64_to_cpu(s);
TRACE("Size is %" PRIu64, *size);
if (read_sync(ioc, flags, sizeof(*flags)) != sizeof(*flags)) {
if (read_sync(ioc, &oldflags, sizeof(oldflags)) != sizeof(oldflags)) {
error_setg(errp, "Failed to read export flags");
goto fail;
}
*flags = be32_to_cpup(flags);
be32_to_cpus(&oldflags);
if (oldflags & ~0xffff) {
error_setg(errp, "Unexpected export flags %0x" PRIx32, oldflags);
goto fail;
}
*flags = oldflags;
} else {
error_setg(errp, "Bad magic received");
goto fail;
}
TRACE("Size is %" PRIu64 ", export flags %" PRIx16, *size, *flags);
if (read_sync(ioc, &buf, 124) != 124) {
error_setg(errp, "Failed to read reserved block");
goto fail;
@@ -589,7 +593,7 @@ fail:
}
#ifdef __linux__
int nbd_init(int fd, QIOChannelSocket *sioc, uint32_t flags, off_t size)
int nbd_init(int fd, QIOChannelSocket *sioc, uint16_t flags, off_t size)
{
TRACE("Setting NBD socket");
@@ -666,7 +670,7 @@ int nbd_client(int fd)
return ret;
}
#else
int nbd_init(int fd, QIOChannelSocket *ioc, uint32_t flags, off_t size)
int nbd_init(int fd, QIOChannelSocket *ioc, uint16_t flags, off_t size)
{
return -ENOTSUP;
}
@@ -683,7 +687,8 @@ ssize_t nbd_send_request(QIOChannel *ioc, struct nbd_request *request)
ssize_t ret;
TRACE("Sending request to server: "
"{ .from = %" PRIu64", .len = %u, .handle = %" PRIu64", .type=%i}",
"{ .from = %" PRIu64", .len = %" PRIu32 ", .handle = %" PRIu64
", .type=%" PRIu16 " }",
request->from, request->len, request->handle, request->type);
cpu_to_be32w((uint32_t*)buf, NBD_REQUEST_MAGIC);
@@ -726,18 +731,18 @@ ssize_t nbd_receive_reply(QIOChannel *ioc, struct nbd_reply *reply)
[ 7 .. 15] handle
*/
magic = be32_to_cpup((uint32_t*)buf);
reply->error = be32_to_cpup((uint32_t*)(buf + 4));
reply->handle = be64_to_cpup((uint64_t*)(buf + 8));
magic = ldl_be_p(buf);
reply->error = ldl_be_p(buf + 4);
reply->handle = ldq_be_p(buf + 8);
reply->error = nbd_errno_to_system_errno(reply->error);
TRACE("Got reply: "
"{ magic = 0x%x, .error = %d, handle = %" PRIu64" }",
TRACE("Got reply: { magic = 0x%" PRIx32 ", .error = % " PRId32
", handle = %" PRIu64" }",
magic, reply->error, reply->handle);
if (magic != NBD_REPLY_MAGIC) {
LOG("invalid magic (got 0x%x)", magic);
LOG("invalid magic (got 0x%" PRIx32 ")", magic);
return -EINVAL;
}
return 0;
+50 -38
View File
@@ -62,7 +62,7 @@ struct NBDExport {
char *name;
off_t dev_offset;
off_t size;
uint32_t nbdflags;
uint16_t nbdflags;
QTAILQ_HEAD(, NBDClient) clients;
QTAILQ_ENTRY(NBDExport) next;
@@ -196,7 +196,7 @@ static int nbd_negotiate_send_rep(QIOChannel *ioc, uint32_t type, uint32_t opt)
uint64_t magic;
uint32_t len;
TRACE("Reply opt=%x type=%x", type, opt);
TRACE("Reply opt=%" PRIx32 " type=%" PRIx32, type, opt);
magic = cpu_to_be64(NBD_REP_MAGIC);
if (nbd_negotiate_write(ioc, &magic, sizeof(magic)) != sizeof(magic)) {
@@ -226,7 +226,7 @@ static int nbd_negotiate_send_rep_list(QIOChannel *ioc, NBDExport *exp)
uint64_t magic, name_len;
uint32_t opt, type, len;
TRACE("Advertizing export name '%s'", exp->name ? exp->name : "");
TRACE("Advertising export name '%s'", exp->name ? exp->name : "");
name_len = strlen(exp->name);
magic = cpu_to_be64(NBD_REP_MAGIC);
if (nbd_negotiate_write(ioc, &magic, sizeof(magic)) != sizeof(magic)) {
@@ -392,12 +392,12 @@ static int nbd_negotiate_options(NBDClient *client)
TRACE("Checking client flags");
be32_to_cpus(&flags);
if (flags & NBD_FLAG_C_FIXED_NEWSTYLE) {
TRACE("Support supports fixed newstyle handshake");
TRACE("Client supports fixed newstyle handshake");
fixedNewstyle = true;
flags &= ~NBD_FLAG_C_FIXED_NEWSTYLE;
}
if (flags != 0) {
TRACE("Unknown client flags 0x%x received", flags);
TRACE("Unknown client flags 0x%" PRIx32 " received", flags);
return -EIO;
}
@@ -431,12 +431,12 @@ static int nbd_negotiate_options(NBDClient *client)
}
length = be32_to_cpu(length);
TRACE("Checking option 0x%x", clientflags);
TRACE("Checking option 0x%" PRIx32, clientflags);
if (client->tlscreds &&
client->ioc == (QIOChannel *)client->sioc) {
QIOChannel *tioc;
if (!fixedNewstyle) {
TRACE("Unsupported option 0x%x", clientflags);
TRACE("Unsupported option 0x%" PRIx32, clientflags);
return -EINVAL;
}
switch (clientflags) {
@@ -455,7 +455,8 @@ static int nbd_negotiate_options(NBDClient *client)
return -EINVAL;
default:
TRACE("Option 0x%x not permitted before TLS", clientflags);
TRACE("Option 0x%" PRIx32 " not permitted before TLS",
clientflags);
if (nbd_negotiate_drop_sync(client->ioc, length) != length) {
return -EIO;
}
@@ -493,7 +494,7 @@ static int nbd_negotiate_options(NBDClient *client)
}
break;
default:
TRACE("Unsupported option 0x%x", clientflags);
TRACE("Unsupported option 0x%" PRIx32, clientflags);
if (nbd_negotiate_drop_sync(client->ioc, length) != length) {
return -EIO;
}
@@ -511,7 +512,7 @@ static int nbd_negotiate_options(NBDClient *client)
return nbd_negotiate_handle_export_name(client, length);
default:
TRACE("Unsupported option 0x%x", clientflags);
TRACE("Unsupported option 0x%" PRIx32, clientflags);
return -EINVAL;
}
}
@@ -528,8 +529,8 @@ static coroutine_fn int nbd_negotiate(NBDClientNewData *data)
NBDClient *client = data->client;
char buf[8 + 8 + 8 + 128];
int rc;
const int myflags = (NBD_FLAG_HAS_FLAGS | NBD_FLAG_SEND_TRIM |
NBD_FLAG_SEND_FLUSH | NBD_FLAG_SEND_FUA);
const uint16_t myflags = (NBD_FLAG_HAS_FLAGS | NBD_FLAG_SEND_TRIM |
NBD_FLAG_SEND_FLUSH | NBD_FLAG_SEND_FUA);
bool oldStyle;
/* Old style negotiation header without options
@@ -559,7 +560,8 @@ static coroutine_fn int nbd_negotiate(NBDClientNewData *data)
oldStyle = client->exp != NULL && !client->tlscreds;
if (oldStyle) {
assert ((client->exp->nbdflags & ~65535) == 0);
TRACE("advertising size %" PRIu64 " and flags %x",
client->exp->size, client->exp->nbdflags | myflags);
stq_be_p(buf + 8, NBD_CLIENT_MAGIC);
stq_be_p(buf + 16, client->exp->size);
stw_be_p(buf + 26, client->exp->nbdflags | myflags);
@@ -588,7 +590,8 @@ static coroutine_fn int nbd_negotiate(NBDClientNewData *data)
goto fail;
}
assert ((client->exp->nbdflags & ~65535) == 0);
TRACE("advertising size %" PRIu64 " and flags %x",
client->exp->size, client->exp->nbdflags | myflags);
stq_be_p(buf + 18, client->exp->size);
stw_be_p(buf + 26, client->exp->nbdflags | myflags);
if (nbd_negotiate_write(client->ioc, buf + 18, sizeof(buf) - 18) !=
@@ -646,18 +649,18 @@ static ssize_t nbd_receive_request(QIOChannel *ioc, struct nbd_request *request)
[24 .. 27] len
*/
magic = be32_to_cpup((uint32_t*)buf);
request->type = be32_to_cpup((uint32_t*)(buf + 4));
request->handle = be64_to_cpup((uint64_t*)(buf + 8));
request->from = be64_to_cpup((uint64_t*)(buf + 16));
request->len = be32_to_cpup((uint32_t*)(buf + 24));
magic = ldl_be_p(buf);
request->type = ldl_be_p(buf + 4);
request->handle = ldq_be_p(buf + 8);
request->from = ldq_be_p(buf + 16);
request->len = ldl_be_p(buf + 24);
TRACE("Got request: "
"{ magic = 0x%x, .type = %d, from = %" PRIu64" , len = %u }",
TRACE("Got request: { magic = 0x%" PRIx32 ", .type = %" PRIx32
", from = %" PRIu64 " , len = %" PRIu32 " }",
magic, request->type, request->from, request->len);
if (magic != NBD_REQUEST_MAGIC) {
LOG("invalid magic (got 0x%x)", magic);
LOG("invalid magic (got 0x%" PRIx32 ")", magic);
return -EINVAL;
}
return 0;
@@ -670,7 +673,8 @@ static ssize_t nbd_send_reply(QIOChannel *ioc, struct nbd_reply *reply)
reply->error = system_errno_to_nbd_errno(reply->error);
TRACE("Sending response to client: { .error = %d, handle = %" PRIu64 " }",
TRACE("Sending response to client: { .error = %" PRId32
", handle = %" PRIu64 " }",
reply->error, reply->handle);
/* Reply
@@ -807,7 +811,7 @@ static void nbd_eject_notifier(Notifier *n, void *data)
}
NBDExport *nbd_export_new(BlockBackend *blk, off_t dev_offset, off_t size,
uint32_t nbdflags, void (*close)(NBDExport *),
uint16_t nbdflags, void (*close)(NBDExport *),
Error **errp)
{
NBDExport *exp = g_malloc0(sizeof(NBDExport));
@@ -999,7 +1003,7 @@ static ssize_t nbd_co_receive_request(NBDRequest *req, struct nbd_request *reque
command = request->type & NBD_CMD_MASK_COMMAND;
if (command == NBD_CMD_READ || command == NBD_CMD_WRITE) {
if (request->len > NBD_MAX_BUFFER_SIZE) {
LOG("len (%u) is larger than max len (%u)",
LOG("len (%" PRIu32" ) is larger than max len (%u)",
request->len, NBD_MAX_BUFFER_SIZE);
rc = -EINVAL;
goto out;
@@ -1012,7 +1016,7 @@ static ssize_t nbd_co_receive_request(NBDRequest *req, struct nbd_request *reque
}
}
if (command == NBD_CMD_WRITE) {
TRACE("Reading %u byte(s)", request->len);
TRACE("Reading %" PRIu32 " byte(s)", request->len);
if (read_sync(client->ioc, req->data, request->len) != request->len) {
LOG("reading from socket failed");
@@ -1062,10 +1066,10 @@ static void nbd_trip(void *opaque)
}
command = request.type & NBD_CMD_MASK_COMMAND;
if (command != NBD_CMD_DISC && (request.from + request.len) > exp->size) {
LOG("From: %" PRIu64 ", Len: %u, Size: %" PRIu64
", Offset: %" PRIu64 "\n",
request.from, request.len,
(uint64_t)exp->size, (uint64_t)exp->dev_offset);
LOG("From: %" PRIu64 ", Len: %" PRIu32", Size: %" PRIu64
", Offset: %" PRIu64 "\n",
request.from, request.len,
(uint64_t)exp->size, (uint64_t)exp->dev_offset);
LOG("requested operation past EOF--bad client?");
goto invalid_request;
}
@@ -1099,7 +1103,7 @@ static void nbd_trip(void *opaque)
goto error_reply;
}
TRACE("Read %u byte(s)", request.len);
TRACE("Read %" PRIu32" byte(s)", request.len);
if (nbd_co_send_reply(req, &reply, request.len) < 0)
goto out;
break;
@@ -1153,19 +1157,27 @@ static void nbd_trip(void *opaque)
break;
case NBD_CMD_TRIM:
TRACE("Request type is TRIM");
ret = blk_co_discard(exp->blk, (request.from + exp->dev_offset)
/ BDRV_SECTOR_SIZE,
request.len / BDRV_SECTOR_SIZE);
if (ret < 0) {
LOG("discard failed");
reply.error = -ret;
/* Ignore unaligned head or tail, until block layer adds byte
* interface */
if (request.len >= BDRV_SECTOR_SIZE) {
request.len -= (request.from + request.len) % BDRV_SECTOR_SIZE;
ret = blk_co_discard(exp->blk,
DIV_ROUND_UP(request.from + exp->dev_offset,
BDRV_SECTOR_SIZE),
request.len / BDRV_SECTOR_SIZE);
if (ret < 0) {
LOG("discard failed");
reply.error = -ret;
}
} else {
TRACE("trim request too small, ignoring");
}
if (nbd_co_send_reply(req, &reply, 0) < 0) {
goto out;
}
break;
default:
LOG("invalid request type (%u) received", request.type);
LOG("invalid request type (%" PRIu32 ") received", request.type);
invalid_request:
reply.error = EINVAL;
error_reply:
+1 -1
View File
@@ -724,7 +724,7 @@ ssize_t qemu_deliver_packet_iov(NetClientState *sender,
return 0;
}
if (nc->info->receive_iov) {
if (nc->info->receive_iov && !(flags & QEMU_NET_PACKET_FLAG_RAW)) {
ret = nc->info->receive_iov(nc, iov, iovcnt);
} else {
ret = nc_sendv_compat(nc, iov, iovcnt, flags);
+4 -4
View File
@@ -151,8 +151,8 @@ static void read_partition(uint8_t *p, struct partition_record *r)
r->end_cylinder = p[7] | ((p[6] << 2) & 0x300);
r->end_sector = p[6] & 0x3f;
r->start_sector_abs = le32_to_cpup((uint32_t *)(p + 8));
r->nb_sectors_abs = le32_to_cpup((uint32_t *)(p + 12));
r->start_sector_abs = ldl_le_p(p + 8);
r->nb_sectors_abs = ldl_le_p(p + 12);
}
static int find_partition(BlockBackend *blk, int partition,
@@ -241,7 +241,7 @@ static void *nbd_client_thread(void *arg)
{
char *device = arg;
off_t size;
uint32_t nbdflags;
uint16_t nbdflags;
QIOChannelSocket *sioc;
int fd;
int ret;
@@ -455,7 +455,7 @@ int main(int argc, char **argv)
BlockBackend *blk;
BlockDriverState *bs;
off_t dev_offset = 0;
uint32_t nbdflags = 0;
uint16_t nbdflags = 0;
bool disconnect = false;
const char *bindto = "0.0.0.0";
const char *port = NULL;
+1 -1
View File
@@ -129,7 +129,7 @@ static void qemu_clock_init(QEMUClockType type)
assert(main_loop_tlg.tl[type] == NULL);
clock->type = type;
clock->enabled = true;
clock->enabled = (type == QEMU_CLOCK_VIRTUAL ? false : true);
clock->last = INT64_MIN;
QLIST_INIT(&clock->timerlists);
notifier_list_init(&clock->reset_notifiers);
+1 -1
View File
@@ -77,7 +77,7 @@ static gboolean ga_channel_prepare(GSource *source, gint *timeout_ms)
}
out:
/* dont block forever, iterate the main loop every once and a while */
/* don't block forever, iterate the main loop every once in a while */
*timeout_ms = 500;
/* if there's data in the read buffer, or another event is pending,
* skip polling and issue user cb.
+2 -2
View File
@@ -182,8 +182,8 @@ GuestExecStatus *qmp_guest_exec_status(int64_t pid, Error **err)
*/
#ifdef G_OS_WIN32
/* Additionally WIN32 does not provide any additional information
* on whetherthe child exited or terminated via signal.
* We use this simple range check to distingish application exit code
* on whether the child exited or terminated via signal.
* We use this simple range check to distinguish application exit code
* (usually value less then 256) and unhandled exception code with
* ntstatus (always value greater then 0xC0000005). */
if ((uint32_t)gei->status < 0xC0000000U) {
+12 -2
View File
@@ -20,9 +20,15 @@
#define MAX_TOKEN_COUNT (2ULL << 20)
#define MAX_NESTING (1ULL << 10)
static void json_message_free_token(void *token, void *opaque)
{
g_free(token);
}
static void json_message_free_tokens(JSONMessageParser *parser)
{
if (parser->tokens) {
g_queue_foreach(parser->tokens, json_message_free_token, NULL);
g_queue_free(parser->tokens);
parser->tokens = NULL;
}
@@ -33,6 +39,7 @@ static void json_message_process_token(JSONLexer *lexer, GString *input,
{
JSONMessageParser *parser = container_of(lexer, JSONMessageParser, lexer);
JSONToken *token;
GQueue *tokens;
switch (type) {
case JSON_LCURLY:
@@ -90,9 +97,12 @@ out_emit:
/* send current list of tokens to parser and reset tokenizer */
parser->brace_count = 0;
parser->bracket_count = 0;
/* parser->emit takes ownership of parser->tokens. */
parser->emit(parser, parser->tokens);
/* parser->emit takes ownership of parser->tokens. Remove our own
* reference to parser->tokens before handing it out to parser->emit.
*/
tokens = parser->tokens;
parser->tokens = g_queue_new();
parser->emit(parser, tokens);
parser->token_size = 0;
}
+1 -1
View File
@@ -363,7 +363,7 @@ sub sanitise_line {
for ($off = 1; $off < length($line); $off++) {
$c = substr($line, $off, 1);
# Comments we are wacking completly including the begin
# Comments we are wacking completely including the begin
# and end, all to $;.
if ($sanitise_quote eq '' && substr($line, $off, 2) eq '/*') {
$sanitise_quote = '*/';
+2
View File
@@ -256,11 +256,13 @@ class ArchPPC(Arch):
self.ioctl_numbers = IOCTL_NUMBERS
self.ioctl_numbers['ENABLE'] = 0x20002400
self.ioctl_numbers['DISABLE'] = 0x20002401
self.ioctl_numbers['RESET'] = 0x20002403
# PPC comes in 32 and 64 bit and some generated ioctl
# numbers depend on the wordsize.
char_ptr_size = ctypes.sizeof(ctypes.c_char_p)
self.ioctl_numbers['SET_FILTER'] = 0x80002406 | char_ptr_size << 16
self.exit_reasons = {}
class ArchA64(Arch):
def __init__(self):
+6
View File
@@ -170,6 +170,9 @@ void visit_type_%(c_name)s(Visitor *v, const char *name, %(c_name)s **obj, Error
if (err) {
goto out;
}
if (!*obj) {
goto out_obj;
}
switch ((*obj)->type) {
''',
c_name=c_name(name), promote_int=promote_int)
@@ -203,10 +206,13 @@ void visit_type_%(c_name)s(Visitor *v, const char *name, %(c_name)s **obj, Error
''')
ret += mcgen('''
case QTYPE_NONE:
abort();
default:
error_setg(&err, QERR_INVALID_PARAMETER_TYPE, name ? name : "null",
"%(name)s");
}
out_obj:
visit_end_alternate(v);
out:
error_propagate(errp, err);
+1 -1
View File
@@ -206,7 +206,7 @@ soread(struct socket *so)
* We don't test for <= 0 this time, because there legitimately
* might not be any more data (since the socket is non-blocking),
* a close will be detected on next iteration.
* A return of -1 wont (shouldn't) happen, since it didn't happen above
* A return of -1 won't (shouldn't) happen, since it didn't happen above
*/
if (n == 2 && nn == iov[0].iov_len) {
int ret;
+2 -2
View File
@@ -3049,7 +3049,7 @@ static unsigned int crisv32_decoder(CPUCRISState *env, DisasContext *dc)
*
* When the software returns from an exception, the branch will re-execute.
* On QEMU care needs to be taken when a branch+delayslot sequence is broken
* and the branch and delayslot dont share pages.
* and the branch and delayslot don't share pages.
*
* The TB contaning the branch insn will set up env->btarget and evaluate
* env->btaken. When the translation loop exits we will note that the branch
@@ -3238,7 +3238,7 @@ void gen_intermediate_code(CPUCRISState *env, struct TranslationBlock *tb)
}
/* If we are rexecuting a branch due to exceptions on
delay slots dont break. */
delay slots don't break. */
if (!(tb->pc & 1) && cs->singlestep_enabled) {
break;
}
+1 -1
View File
@@ -130,7 +130,7 @@ static void cris_set_prefix(DisasContext *dc)
dc->tb_flags |= PFIX_FLAG;
tcg_gen_ori_tl(cpu_PR[PR_CCS], cpu_PR[PR_CCS], PFIX_FLAG);
/* prefix insns dont clear the x flag. */
/* prefix insns don't clear the x flag. */
dc->clear_x = 0;
cris_lock_irq(dc);
}
+1 -1
View File
@@ -2523,7 +2523,7 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,
/* The Linux kernel checks for the CMPLegacy bit and
* discards multiple thread information if it is set.
* So dont set it here for Intel to make Linux guests happy.
* So don't set it here for Intel to make Linux guests happy.
*/
if (cs->nr_cores * cs->nr_threads > 1) {
if (env->cpuid_vendor1 != CPUID_VENDOR_INTEL_1 ||
+1 -1
View File
@@ -1366,7 +1366,7 @@ void cpu_report_tpr_access(CPUX86State *env, TPRAccess access);
* If value is NULL, no default will be set and the original
* value from the CPU model table will be kept.
*
* It is valid to call this funciton only for properties that
* It is valid to call this function only for properties that
* are already present in the kvm_default_props table.
*/
void x86_cpu_change_kvm_default(const char *prop, const char *value);
+6 -1
View File
@@ -7170,7 +7170,7 @@ static target_ulong disas_insn(CPUX86State *env, DisasContext *s,
tcg_gen_trunc_tl_i32(cpu_tmp2_i32, cpu_regs[R_ECX]);
gen_helper_xsetbv(cpu_env, cpu_tmp2_i32, cpu_tmp1_i64);
/* End TB because translation flags may change. */
gen_jmp_im(s->pc - pc_start);
gen_jmp_im(s->pc - s->cs_base);
gen_eob(s);
break;
@@ -8002,6 +8002,11 @@ static target_ulong disas_insn(CPUX86State *env, DisasContext *s,
}
/* fallthru */
case 0xf9 ... 0xff: /* sfence */
if (!(s->cpuid_features & CPUID_SSE)
|| (prefixes & PREFIX_LOCK)) {
goto illegal_op;
}
break;
case 0xe8 ... 0xef: /* lfence */
case 0xf0 ... 0xf7: /* mfence */
if (!(s->cpuid_features & CPUID_SSE2)
+1 -1
View File
@@ -539,7 +539,7 @@ void mips_cpu_do_interrupt(CPUState *cs)
break;
case EXCP_SRESET:
env->CP0_Status |= (1 << CP0St_SR);
memset(env->CP0_WatchLo, 0, sizeof(*env->CP0_WatchLo));
memset(env->CP0_WatchLo, 0, sizeof(env->CP0_WatchLo));
goto set_error_EPC;
case EXCP_NMI:
env->CP0_Status |= (1 << CP0St_NMI);
+1 -1
View File
@@ -581,7 +581,7 @@ static bool mips_vp_is_wfi(MIPSCPU *c)
static inline void mips_vpe_wake(MIPSCPU *c)
{
/* Dont set ->halted = 0 directly, let it be done via cpu_has_work
/* Don't set ->halted = 0 directly, let it be done via cpu_has_work
because there might be other conditions that state that c should
be sleeping. */
cpu_interrupt(CPU(c), CPU_INTERRUPT_WAKE);
+5
View File
@@ -220,6 +220,11 @@ int cpu_get_dump_info(ArchDumpInfo *info,
} else {
info->d_endian = ELFDATA2LSB;
}
/* 64KB is the max page size for pseries kernel */
if (strncmp(object_get_typename(qdev_get_machine()),
"pseries-", 8) == 0) {
info->page_size = (1U << 16);
}
return 0;
}
+4 -1
View File
@@ -4668,12 +4668,15 @@ static void disas_sparc_insn(DisasContext * dc, unsigned int insn)
case 0xd: /* ldstub -- XXX: should be atomically */
{
TCGv r_const;
TCGv tmp = tcg_temp_new();
gen_address_mask(dc, cpu_addr);
tcg_gen_qemu_ld8u(cpu_val, cpu_addr, dc->mem_idx);
tcg_gen_qemu_ld8u(tmp, cpu_addr, dc->mem_idx);
r_const = tcg_const_tl(0xff);
tcg_gen_qemu_st8(r_const, cpu_addr, dc->mem_idx);
tcg_gen_mov_tl(cpu_val, tmp);
tcg_temp_free(r_const);
tcg_temp_free(tmp);
}
break;
case 0x0f:
+1 -1
View File
@@ -2858,7 +2858,7 @@ static void gen_shaci(TCGv ret, TCGv r1, int32_t shift_count)
} else if (shift_count == -32) {
/* set PSW.C */
tcg_gen_mov_tl(cpu_PSW_C, r1);
/* fill ret completly with sign bit */
/* fill ret completely with sign bit */
tcg_gen_sari_tl(ret, r1, 31);
/* clear PSW.V */
tcg_gen_movi_tl(cpu_PSW_V, 0);
+1 -1
View File
@@ -473,7 +473,7 @@ On a 32 bit target, all 64 bit operations are converted to 32 bits. A
few specific operations must be implemented to allow it (see add2_i32,
sub2_i32, brcond2_i32).
On a 64 bit target, the values are transfered between 32 and 64-bit
On a 64 bit target, the values are transferred between 32 and 64-bit
registers using the following ops:
- trunc_shr_i64_i32
- ext_i32_i64
+98
View File
@@ -184,5 +184,103 @@ class ThrottleTestCase(iotests.QMPTestCase):
class ThrottleTestCoroutine(ThrottleTestCase):
test_img = "null-co://"
class ThrottleTestGroupNames(iotests.QMPTestCase):
test_img = "null-aio://"
max_drives = 3
def setUp(self):
self.vm = iotests.VM()
for i in range(0, self.max_drives):
self.vm.add_drive(self.test_img, "throttling.iops-total=100")
self.vm.launch()
def tearDown(self):
self.vm.shutdown()
def set_io_throttle(self, device, params):
params["device"] = device
result = self.vm.qmp("block_set_io_throttle", conv_keys=False, **params)
self.assert_qmp(result, 'return', {})
def verify_name(self, device, name):
result = self.vm.qmp("query-block")
for r in result["return"]:
if r["device"] == device:
info = r["inserted"]
if name:
self.assertEqual(info["group"], name)
else:
self.assertFalse(info.has_key('group'))
return
raise Exception("No group information found for '%s'" % device)
def test_group_naming(self):
params = {"bps": 0,
"bps_rd": 0,
"bps_wr": 0,
"iops": 0,
"iops_rd": 0,
"iops_wr": 0}
# Check the drives added using the command line.
# The default throttling group name is the device name.
for i in range(self.max_drives):
devname = "drive%d" % i
self.verify_name(devname, devname)
# Clear throttling settings => the group name is gone.
for i in range(self.max_drives):
devname = "drive%d" % i
self.set_io_throttle(devname, params)
self.verify_name(devname, None)
# Set throttling settings using block_set_io_throttle and
# check the default group names.
params["iops"] = 10
for i in range(self.max_drives):
devname = "drive%d" % i
self.set_io_throttle(devname, params)
self.verify_name(devname, devname)
# Set a custom group name for each device
for i in range(3):
devname = "drive%d" % i
groupname = "group%d" % i
params['group'] = groupname
self.set_io_throttle(devname, params)
self.verify_name(devname, groupname)
# Put drive0 in group1 and check that all other devices remain
# unchanged
params['group'] = 'group1'
self.set_io_throttle('drive0', params)
self.verify_name('drive0', 'group1')
for i in range(1, self.max_drives):
devname = "drive%d" % i
groupname = "group%d" % i
self.verify_name(devname, groupname)
# Put drive0 in group2 and check that all other devices remain
# unchanged
params['group'] = 'group2'
self.set_io_throttle('drive0', params)
self.verify_name('drive0', 'group2')
for i in range(1, self.max_drives):
devname = "drive%d" % i
groupname = "group%d" % i
self.verify_name(devname, groupname)
# Clear throttling settings from drive0 check that all other
# devices remain unchanged
params["iops"] = 0
self.set_io_throttle('drive0', params)
self.verify_name('drive0', None)
for i in range(1, self.max_drives):
devname = "drive%d" % i
groupname = "group%d" % i
self.verify_name(devname, groupname)
if __name__ == '__main__':
iotests.main(supported_fmts=["raw"])
+2 -2
View File
@@ -1,5 +1,5 @@
....
.....
----------------------------------------------------------------------
Ran 4 tests
Ran 5 tests
OK
+7 -7
View File
@@ -51,7 +51,7 @@ int main(void)
t = (unsigned char *)x;
t -= 32768;
p = (unsigned char *) &y.v1;
mb(); /* dont reorder anything beyond here. */
mb(); /* don't reorder anything beyond here. */
cris_tst_cc_init();
asm volatile ("setf\tzvnc\n");
cris_addo_pi_d(p, t);
@@ -62,7 +62,7 @@ int main(void)
t += 32770;
mb(); /* dont reorder anything beyond here. */
mb(); /* don't reorder anything beyond here. */
cris_tst_cc_init();
asm volatile ("setf\tzvnc\n");
cris_addo_pi_w(p, t);
@@ -71,7 +71,7 @@ int main(void)
if (*r != 0x4455aa77)
err();
mb(); /* dont reorder anything beyond here. */
mb(); /* don't reorder anything beyond here. */
cris_tst_cc_init();
asm volatile ("setf\tzvnc\n");
cris_addo_d(p, r);
@@ -81,7 +81,7 @@ int main(void)
if (*r != 0xee19ccff)
err();
mb(); /* dont reorder anything beyond here. */
mb(); /* don't reorder anything beyond here. */
cris_tst_cc_init();
asm volatile ("setf\tzvnc\n");
cris_addo_pi_b(p, t);
@@ -90,7 +90,7 @@ int main(void)
if (*(uint16_t*)r != 0xff22)
err();
mb(); /* dont reorder anything beyond here. */
mb(); /* don't reorder anything beyond here. */
cris_tst_cc_init();
asm volatile ("setf\tzvnc\n");
cris_addo_b(p, r);
@@ -100,7 +100,7 @@ int main(void)
if (*r != 0x4455aa77)
err();
mb(); /* dont reorder anything beyond here. */
mb(); /* don't reorder anything beyond here. */
cris_tst_cc_init();
asm volatile ("setf\tzvnc\n");
cris_addo_w(p, r);
@@ -110,7 +110,7 @@ int main(void)
if (*r != 0xff224455)
err();
mb(); /* dont reorder anything beyond here. */
mb(); /* don't reorder anything beyond here. */
cris_tst_cc_init();
asm volatile ("setf\tzvnc\n");
cris_addo_pi_d(p, t);
+2 -2
View File
@@ -453,7 +453,7 @@ static void test_timer_schedule(void)
{
TimerTestData data = { .n = 0, .ctx = ctx, .ns = SCALE_MS * 750LL,
.max = 2,
.clock_type = QEMU_CLOCK_VIRTUAL };
.clock_type = QEMU_CLOCK_REALTIME };
EventNotifier e;
/* aio_poll will not block to wait for timers to complete unless it has
@@ -783,7 +783,7 @@ static void test_source_timer_schedule(void)
{
TimerTestData data = { .n = 0, .ctx = ctx, .ns = SCALE_MS * 750LL,
.max = 2,
.clock_type = QEMU_CLOCK_VIRTUAL };
.clock_type = QEMU_CLOCK_REALTIME };
EventNotifier e;
int64_t expiry;
+14
View File
@@ -739,6 +739,8 @@ static void test_visitor_in_errors(TestInputVisitorData *data,
Error *err = NULL;
Visitor *v;
strList *q = NULL;
UserDefTwo *r = NULL;
WrapAlternate *s = NULL;
v = visitor_input_test_init(data, "{ 'integer': false, 'boolean': 'foo', "
"'string': -42 }");
@@ -757,6 +759,18 @@ static void test_visitor_in_errors(TestInputVisitorData *data,
error_free_or_abort(&err);
assert(q);
qapi_free_strList(q);
v = visitor_input_test_init(data, "{ 'str':'hi' }");
visit_type_UserDefTwo(v, NULL, &r, &err);
error_free_or_abort(&err);
assert(r);
qapi_free_UserDefTwo(r);
v = visitor_input_test_init(data, "{ }");
visit_type_WrapAlternate(v, NULL, &s, &err);
error_free_or_abort(&err);
assert(s);
qapi_free_WrapAlternate(s);
}
static void test_visitor_in_wrong_type(TestInputVisitorData *data,
+2 -2
View File
@@ -108,7 +108,7 @@ static bool get_trace_record(unsigned int idx, TraceRecord **recordptr)
smp_rmb(); /* read memory barrier before accessing record */
/* read the record header to know record length */
read_from_buffer(idx, &record, sizeof(TraceRecord));
*recordptr = malloc(record.length); /* dont use g_malloc, can deadlock when traced */
*recordptr = malloc(record.length); /* don't use g_malloc, can deadlock when traced */
/* make a copy of record to avoid being overwritten */
read_from_buffer(idx, *recordptr, record.length);
smp_rmb(); /* memory barrier before clearing valid flag */
@@ -180,7 +180,7 @@ static gpointer writeout_thread(gpointer opaque)
while (get_trace_record(idx, &recordptr)) {
unused = fwrite(recordptr, recordptr->length, 1, trace_fp);
writeout_idx += recordptr->length;
free(recordptr); /* dont use g_free, can deadlock when traced */
free(recordptr); /* don't use g_free, can deadlock when traced */
idx = writeout_idx % TRACE_BUF_LEN;
}
+1 -1
View File
@@ -1394,7 +1394,7 @@ static void addRemovableDevicesMenuItems(void)
[menuItem setEnabled: NO];
[menu addItem: menuItem];
/* Loop thru all the block devices in the emulator */
/* Loop through all the block devices in the emulator */
while (currentDevice) {
deviceName = [[NSString stringWithFormat: @"%s", currentDevice->value->device] retain];
+6 -4
View File
@@ -340,10 +340,12 @@ static void gd_update_geometry_hints(VirtualConsole *vc)
geo.min_height = geo.height_inc * VC_TERM_Y_MIN;
mask |= GDK_HINT_MIN_SIZE;
gtk_widget_style_get(vc->vte.terminal, "inner-border", &ib, NULL);
geo.base_width += ib->left + ib->right;
geo.base_height += ib->top + ib->bottom;
geo.min_width += ib->left + ib->right;
geo.min_height += ib->top + ib->bottom;
if (ib) {
geo.base_width += ib->left + ib->right;
geo.base_height += ib->top + ib->bottom;
geo.min_width += ib->left + ib->right;
geo.min_height += ib->top + ib->bottom;
}
geo_widget = vc->vte.terminal;
#endif
}
+7
View File
@@ -357,6 +357,10 @@ static void handle_keydown(SDL_Event *ev)
case SDL_SCANCODE_7:
case SDL_SCANCODE_8:
case SDL_SCANCODE_9:
if (gui_grab) {
sdl_grab_end(scon);
}
win = ev->key.keysym.scancode - SDL_SCANCODE_1;
if (win < sdl2_num_outputs) {
sdl2_console[win].hidden = !sdl2_console[win].hidden;
@@ -790,6 +794,9 @@ void sdl_display_init(DisplayState *ds, int full_screen, int no_frame)
}
}
sdl2_num_outputs = i;
if (sdl2_num_outputs == 0) {
return;
}
sdl2_console = g_new0(struct sdl2_console, sdl2_num_outputs);
for (i = 0; i < sdl2_num_outputs; i++) {
QemuConsole *con = qemu_console_lookup_by_index(i);
+4 -2
View File
@@ -833,9 +833,11 @@ void qemu_spice_init(void)
"incompatible with -spice port/tls-port");
exit(1);
}
if (egl_rendernode_init() == 0) {
display_opengl = 1;
if (egl_rendernode_init() != 0) {
error_report("Failed to initialize EGL render node for SPICE GL");
exit(1);
}
display_opengl = 1;
}
#endif
}

Some files were not shown because too many files have changed in this diff Show More