Update for 2024.08.1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

.b4-config

@@ -3,6 +3,5 @@
 [b4]
     send-series-to = buildroot@buildroot.org
     send-auto-cc-cmd = "./utils/get-developers -e -"
-    prep-perpatch-check-cmd = "./utils/check-package -q -p -"
 
 # vim: set filetype=gitconfig:

.checkpackageignore

@@ -1,3 +1,4 @@
+board/aarch64-efi/post-image.sh Shellcheck
 board/amarula/vyasa/post-build.sh Shellcheck
 board/andes/ae350/patches/uboot/0001-mmc-ftsdc010_mci-Support-DTS-of-ftsdc010-driver-for-.patch lib_patch.Upstream
 board/andes/ae350/patches/uboot/0002-spl-Align-device-tree-blob-address-at-8-byte-boundar.patch lib_patch.Upstream
@@ -21,10 +22,12 @@ board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh Shellcheck
 board/bsh/imx8mn-bsh-smm-s2/flash.sh Shellcheck lib_shellscript.EmptyLastLine
 board/bsh/imx8mn-bsh-smm-s2/post-build.sh Shellcheck
 board/canaan/k210-soc/post-build.sh Shellcheck
+board/canaan/k210-soc/rootfs_overlay/sbin/init Shellcheck
 board/chromebook/elm/sign.sh Shellcheck
 board/chromebook/mksd.sh Shellcheck
 board/chromebook/snow/sign.sh Shellcheck
 board/ci20/patches/uboot/0001-mips-Remove-default-endiannes.patch lib_patch.Upstream
+board/cubietech/cubieboard2/post-image.sh Shellcheck
 board/freescale/common/imx/imx8-bootloader-prepare.sh Shellcheck
 board/freescale/common/mxs/post-image.sh Shellcheck
 board/friendlyarm/nanopi-r2s/post-build.sh Shellcheck
@@ -42,6 +45,7 @@ board/lego/ev3/post-image.sh Shellcheck
 board/lemaker/bananapro/patches/linux/0001-arch-arm-boot-dts-sun7i-a20-bananapro.dts-disable-00.patch lib_patch.Upstream
 board/lemaker/bananapro/post-build.sh Shellcheck
 board/lemaker/bananapro/post-image.sh Shellcheck
+board/mender/x86_64/post-image-efi.sh lib_shellscript.ConsecutiveEmptyLines
 board/minnowboard/post-build.sh Shellcheck
 board/nexbox/a95x/post-build.sh Shellcheck
 board/nexbox/a95x/post-image.sh Shellcheck
@@ -62,6 +66,7 @@ board/orangepi/orangepi-zero/patches/linux/0003-ARM-dts-orange-pi-zero-enable-sp
 board/orangepi/orangepi-zero/patches/linux/0004-ARM-dts-orange-pi-zero-enable-uart.patch lib_patch.Upstream
 board/pine64/rock64/patches/uboot/0001-Makefile-rk3328-needs-itb-image-to-boot-properly.patch lib_patch.Upstream
 board/pine64/rock64/post-build.sh Shellcheck
+board/pine64/rockpro64/post-build.sh Shellcheck
 board/qemu/aarch64-sbsa/assemble-flash-images Shellcheck
 board/qemu/x86/post-build.sh Shellcheck
 board/qemu/x86_64/post-build.sh Shellcheck
@@ -72,18 +77,21 @@ board/roseapplepi/patches/uboot/0001-compiler-.h-sync-include-linux-compiler-.h-
 board/roseapplepi/post-build.sh Shellcheck
 board/seeed/stm32mp157c-odyssey/patches/linux/0001-ARM-dts-stm32-fix-stm32mp157c-odyssey-card-detect.patch lib_patch.Upstream
 board/sheevaplug/patches/uboot/0001-Remove-redundant-YYLOC-global-declaration.patch lib_patch.Upstream
+board/sifive/hifive-unleashed/post-build.sh Shellcheck
 board/solidrun/clearfog/post-build.sh Shellcheck
 board/solidrun/macchiatobin/post-build-mainline.sh Shellcheck
 board/solidrun/macchiatobin/post-build.sh Shellcheck
 board/stmicroelectronics/common/stm32f4xx/stm32-post-build.sh Shellcheck
-board/stmicroelectronics/common/stm32mp1xx/post-image.sh Shellcheck
+board/stmicroelectronics/common/stm32mp157/post-image.sh Shellcheck
 board/stmicroelectronics/stm32f429-disco/flash.sh Shellcheck
 board/stmicroelectronics/stm32f469-disco/flash_sd.sh Shellcheck
 board/stmicroelectronics/stm32f469-disco/flash_xip.sh Shellcheck
+board/stmicroelectronics/stm32f469-disco/post-build.sh Shellcheck
 board/synopsys/axs10x/post-build.sh Shellcheck
 board/technologic/ts4900/post-image.sh Shellcheck
 board/toradex/apalis-imx6/post-image.sh Shellcheck
 board/udoo/common/post-build.sh Shellcheck
+board/udoo/mx6qdl/patches/linux/0000-udoo-disable-usbh1.patch lib_patch.Upstream
 boot/afboot-stm32/0003-Makefile-disable-stack-protector.patch lib_patch.Upstream
 boot/optee-os/3.13.0/0001-core-zlib-fix-build-warning-when-_LFS64_LARGEFILE-is.patch lib_patch.Upstream
 boot/syslinux/0001-bios-Fix-alignment-change-with-gcc-5.patch lib_patch.Upstream
@@ -100,10 +108,12 @@ boot/syslinux/0013-Fix-build-with-gnu-efi-version-3.0.9.patch lib_patch.Upstream
 boot/syslinux/0014-Fix-build-with-binutils-note-gnu-property-section.patch lib_patch.Upstream
 boot/syslinux/0016-Workaround-multiple-definition-of-symbol-errors.patch lib_patch.Upstream
 boot/syslinux/0017-Replace-builtin-strlen-that-appears-to-get-optimized.patch lib_patch.Upstream
+configs/aarch64_efi_defconfig lib_defconfig.ForceCheckHash
 configs/am574x_idk_defconfig lib_defconfig.ForceCheckHash
 configs/andes_ae350_45_defconfig lib_defconfig.ForceCheckHash
 configs/arcturus_ucls1012a_defconfig lib_defconfig.ForceCheckHash
 configs/arcturus_ucp1020_defconfig lib_defconfig.ForceCheckHash
+configs/arm_foundationv8_defconfig lib_defconfig.ForceCheckHash
 configs/aspeed_ast2500evb_defconfig lib_defconfig.ForceCheckHash
 configs/aspeed_ast2600evb_defconfig lib_defconfig.ForceCheckHash
 configs/asus_tinker-s_rk3288_defconfig lib_defconfig.ForceCheckHash
@@ -134,17 +144,23 @@ configs/beelink_gs1_defconfig lib_defconfig.ForceCheckHash
 configs/broadcom_northstar_defconfig lib_defconfig.ForceCheckHash
 configs/canaan_kd233_defconfig lib_defconfig.ForceCheckHash
 configs/ci20_defconfig lib_defconfig.ForceCheckHash
+configs/cubieboard2_defconfig lib_defconfig.ForceCheckHash
 configs/engicam_imx6qdl_icore_defconfig lib_defconfig.ForceCheckHash
 configs/engicam_imx6qdl_icore_qt5_defconfig lib_defconfig.ForceCheckHash
 configs/engicam_imx6qdl_icore_rqs_defconfig lib_defconfig.ForceCheckHash
 configs/engicam_imx6ul_geam_defconfig lib_defconfig.ForceCheckHash
 configs/engicam_imx6ul_isiot_defconfig lib_defconfig.ForceCheckHash
+configs/freescale_imx28evk_defconfig lib_defconfig.ForceCheckHash
 configs/freescale_p1025twr_defconfig lib_defconfig.ForceCheckHash
 configs/freescale_t1040d4rdb_defconfig lib_defconfig.ForceCheckHash
 configs/freescale_t2080_qds_rdb_defconfig lib_defconfig.ForceCheckHash
 configs/friendlyarm_nanopi_r2s_defconfig lib_defconfig.ForceCheckHash
 configs/galileo_defconfig lib_defconfig.ForceCheckHash
 configs/globalscale_espressobin_defconfig lib_defconfig.ForceCheckHash
+configs/grinn_chiliboard_defconfig lib_defconfig.ForceCheckHash
+configs/grinn_liteboard_defconfig lib_defconfig.ForceCheckHash
+configs/hifive_unleashed_defconfig lib_defconfig.ForceCheckHash
+configs/icnova-a20-adb4006_defconfig lib_defconfig.ForceCheckHash
 configs/imx23evk_defconfig lib_defconfig.ForceCheckHash
 configs/imx6-sabreauto_defconfig lib_defconfig.ForceCheckHash
 configs/imx6-sabresd_defconfig lib_defconfig.ForceCheckHash
@@ -154,6 +170,7 @@ configs/imx6sx-sdb_defconfig lib_defconfig.ForceCheckHash
 configs/imx6ulevk_defconfig lib_defconfig.ForceCheckHash
 configs/imx6ullevk_defconfig lib_defconfig.ForceCheckHash
 configs/imx6ulpico_defconfig lib_defconfig.ForceCheckHash
+configs/imx7d-sdb_defconfig lib_defconfig.ForceCheckHash
 configs/imx7dpico_defconfig lib_defconfig.ForceCheckHash
 configs/imx8mqevk_defconfig lib_defconfig.ForceCheckHash
 configs/imxrt1050-evk_defconfig lib_defconfig.ForceCheckHash
@@ -161,6 +178,8 @@ configs/khadas_vim3_defconfig lib_defconfig.ForceCheckHash
 configs/kontron_bl_imx8mm_defconfig lib_defconfig.ForceCheckHash
 configs/kontron_pitx_imx8m_defconfig lib_defconfig.ForceCheckHash
 configs/kontron_smarc_sal28_defconfig lib_defconfig.ForceCheckHash
+configs/linksprite_pcduino_defconfig lib_defconfig.ForceCheckHash
+configs/ls1046a-frwy_defconfig lib_defconfig.ForceCheckHash
 configs/mangopi_mq1rdw2_defconfig lib_defconfig.ForceCheckHash
 configs/mender_x86_64_efi_defconfig lib_defconfig.ForceCheckHash
 configs/microchip_sam9x60ek_mmc_defconfig lib_defconfig.ForceCheckHash
@@ -182,6 +201,8 @@ configs/nitrogen8m_defconfig lib_defconfig.ForceCheckHash
 configs/nitrogen8mm_defconfig lib_defconfig.ForceCheckHash
 configs/nitrogen8mn_defconfig lib_defconfig.ForceCheckHash
 configs/nitrogen8mp_defconfig lib_defconfig.ForceCheckHash
+configs/octavo_osd32mp1_brk_defconfig lib_defconfig.ForceCheckHash
+configs/octavo_osd32mp1_red_defconfig lib_defconfig.ForceCheckHash
 configs/odroidc2_defconfig lib_defconfig.ForceCheckHash
 configs/odroidxu4_defconfig lib_defconfig.ForceCheckHash
 configs/olimex_a10_olinuxino_lime_defconfig lib_defconfig.ForceCheckHash
@@ -192,8 +213,13 @@ configs/olimex_a64_olinuxino_defconfig lib_defconfig.ForceCheckHash
 configs/olpc_xo175_defconfig lib_defconfig.ForceCheckHash
 configs/olpc_xo1_defconfig lib_defconfig.ForceCheckHash
 configs/orangepi_lite2_defconfig lib_defconfig.ForceCheckHash
+configs/orangepi_one_defconfig lib_defconfig.ForceCheckHash
 configs/orangepi_one_plus_defconfig lib_defconfig.ForceCheckHash
 configs/orangepi_pc2_defconfig lib_defconfig.ForceCheckHash
+configs/orangepi_pc_plus_defconfig lib_defconfig.ForceCheckHash
+configs/orangepi_zero3_defconfig lib_defconfig.ForceCheckHash
+configs/orangepi_zero_defconfig lib_defconfig.ForceCheckHash
+configs/orangepi_zero_plus2_defconfig lib_defconfig.ForceCheckHash
 configs/orangepi_zero_plus_defconfig lib_defconfig.ForceCheckHash
 configs/pc_x86_64_bios_defconfig lib_defconfig.ForceCheckHash
 configs/pc_x86_64_efi_defconfig lib_defconfig.ForceCheckHash
@@ -203,8 +229,10 @@ configs/pine64_pinecube_defconfig lib_defconfig.ForceCheckHash
 configs/pine64_sopine_defconfig lib_defconfig.ForceCheckHash
 configs/pine64_star64_defconfig lib_defconfig.ForceCheckHash
 configs/riotboard_defconfig lib_defconfig.ForceCheckHash
+configs/roc_pc_rk3399_defconfig lib_defconfig.ForceCheckHash
 configs/rock64_defconfig lib_defconfig.ForceCheckHash
 configs/rock_pi_n8_defconfig lib_defconfig.ForceCheckHash
+configs/rockpro64_defconfig lib_defconfig.ForceCheckHash
 configs/roseapplepi_defconfig lib_defconfig.ForceCheckHash
 configs/s6lx9_microboard_defconfig lib_defconfig.ForceCheckHash
 configs/sipeed_lichee_rv_defconfig lib_defconfig.ForceCheckHash
@@ -225,6 +253,7 @@ configs/snps_archs38_axs103_defconfig lib_defconfig.ForceCheckHash
 configs/snps_archs38_haps_defconfig lib_defconfig.ForceCheckHash
 configs/snps_archs38_hsdk_defconfig lib_defconfig.ForceCheckHash
 configs/socrates_cyclone5_defconfig lib_defconfig.ForceCheckHash
+configs/solidrun_clearfog_defconfig lib_defconfig.ForceCheckHash
 configs/solidrun_clearfog_gt_8k_defconfig lib_defconfig.ForceCheckHash
 configs/solidrun_macchiatobin_defconfig lib_defconfig.ForceCheckHash
 configs/stm32mp157c_odyssey_defconfig lib_defconfig.ForceCheckHash
@@ -253,15 +282,17 @@ package/am33x-cm3/0004-Makefile-add-fno-builtin.patch lib_patch.Upstream
 package/am33x-cm3/S93-am335x-pm-firmware-load lib_sysv.Variables
 package/android-tools/0001-Fix-makefiles-for-out-of-tree-build.patch lib_patch.Upstream
 package/android-tools/0002-Fix-adbd-for-non-Ubuntu-systems.patch lib_patch.Upstream
+package/android-tools/0003-Fix-build-issue-with-uclibc.patch lib_patch.Upstream
 package/android-tools/0004-Fix-build-issue-with-musl.patch lib_patch.Upstream
-package/android-tools/0005-makefiles-use-pkgconf-to-get-libs-deps.patch lib_patch.Upstream
-package/android-tools/0006-Fix-build-on-big-endian-systems.patch lib_patch.Upstream
-package/android-tools/0007-Include-cdefs.h-wherever-it-is-needed.patch lib_patch.Upstream
-package/android-tools/0008-usb_linux.c-fix-minor-major-build-failure-due-to-gli.patch lib_patch.Upstream
+package/android-tools/0005-Use-pkgconf-to-get-libs-deps.patch lib_patch.Upstream
+package/android-tools/0006-fix-big-endian-build.patch lib_patch.Upstream
+package/android-tools/0007-include-cdefs-h-when-needed.patch lib_patch.Upstream
+package/android-tools/0008-Include-sysmacros.h-to-compile-with-glibc-2.28.patch lib_patch.Sob lib_patch.Upstream
 package/android-tools/0009-Fix-makefiles-for-out-of-tree-ext4_utils-build.patch lib_patch.Upstream
 package/android-tools/0010-adb-added-patch-for-openssl-1.1.0-compatibility.patch lib_patch.Upstream
 package/aoetools/0001-Change-shell-script-interpreter-from-bin-bash-to-bin.patch lib_patch.Upstream
 package/apache/0001-cross-compile.patch lib_patch.Upstream
+package/apache/0002-nios2_is_not_os2.patch lib_patch.Upstream
 package/apache/S50apache Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/apitrace/0001-thirdparty-libbacktrace-backtrace-h-include-config.h.patch lib_patch.Upstream
 package/apitrace/0002-gltrace-Avoid-__libc_dlsym-and-__libc_dlopen_mode-on-GLIBC-2-34.patch lib_patch.Upstream
@@ -278,6 +309,7 @@ package/asterisk/0004-install-samples-need-the-data-files.patch lib_patch.Upstre
 package/at/0001-Makefile.in-fix-make-install-for-non-root-don-t-stri.patch lib_patch.Upstream
 package/at/S99at lib_sysv.Indent lib_sysv.Variables
 package/attr/0001-build-with-older-GCCs.patch lib_patch.Upstream
+package/audit/S02auditd Shellcheck lib_sysv.Variables
 package/aufs-util/0001-remove-user-settings.patch lib_patch.Upstream
 package/aufs-util/0002-no-check-ver.patch lib_patch.Upstream
 package/aufs-util/0003-no-strip-lib.patch lib_patch.Upstream
@@ -291,6 +323,7 @@ package/babeld/S50babeld Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/babeltrace2/0001-configure-simplify-warning-flags-detection.patch lib_patch.Upstream
 package/bash/0001-input.h-add-missing-include-on-stdio.h.patch lib_patch.Upstream
 package/bash/0002-parse.y-fix-compilation-for-non-multibyte-builds.patch lib_patch.Upstream
+package/bash/0003-configure-invert-condition-for-strtoimax-builtin.patch lib_patch.Upstream
 package/bc/0001-bc-use-MAKEINFO-variable-for-docs.patch lib_patch.Upstream
 package/bc/0002-notice-read-and-write-errors-on-input-and-output.patch lib_patch.Upstream
 package/bc/0003-dc-fix-exit-code-of-q-command.patch lib_patch.Upstream
@@ -313,6 +346,7 @@ package/brickd/S70brickd Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/bridge-utils/0001-fix-build-on-musl.patch lib_patch.Upstream
 package/brltty/0001-Fix-linking-error-on-mips64el.patch lib_patch.Upstream
 package/brltty/S10brltty Shellcheck lib_sysv.Indent lib_sysv.Variables
+package/bsdiff/0001-Add-missing-header-for-u_char.patch lib_patch.Upstream
 package/bustle/0001-Makefile-fix-pcap-config-call.patch lib_patch.Upstream
 package/busybox/0001-networking-libiproute-use-linux-if_packet.h-instead-.patch lib_patch.Upstream
 package/busybox/0002-Makefile.flags-strip-non-l-arguments-returned-by-pkg.patch lib_patch.Upstream
@@ -337,7 +371,7 @@ package/cfm/S65cfm lib_sysv.Indent lib_sysv.Variables
 package/cgroupfs-mount/S30cgroupfs Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/chipmunk/0001-Fix-build-failure-on-musl.patch lib_patch.Upstream
 package/chocolate-doom/0001-Remove-redundant-demoextend-definition.patch lib_patch.Upstream
-package/chrony/S49chronyd lib_sysv.Variables
+package/chrony/S49chrony Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/cmake/0001-rename-cmake-rootfile.patch lib_patch.Upstream
 package/cmocka/0001-Don-t-redefine-uintptr_t.patch lib_patch.Upstream
 package/collectd/0001-src-netlink.c-remove-REG_NOERROR.patch lib_patch.Upstream
@@ -390,12 +424,20 @@ package/dht/0001-cmake.patch lib_patch.Upstream
 package/dillo/0001-usr-local-include.patch lib_patch.Upstream
 package/dillo/0002-Fix-openssl-detection.patch lib_patch.Upstream
 package/dillo/0004-fix-build-with-gcc-10.patch lib_patch.Upstream
+package/directfb-examples/0001-remove-bzero.patch lib_patch.Sob lib_patch.Upstream
+package/directfb/0001-fix-missing-davinci-voodoo-header.patch lib_patch.Upstream
+package/directfb/0002-imlib2-config.patch lib_patch.Upstream
+package/directfb/0003-setregion-lock.patch lib_patch.Upstream
+package/directfb/0004-use-gcc-link.patch lib_patch.Upstream
+package/directfb/0005-add-missing-idivine-header.patch lib_patch.Upstream
+package/directfb/0006-fix-client-gfx_state-initialisation.patch lib_patch.Upstream
 package/dmalloc/0001-configure-fix-build-on-mips.patch lib_patch.Upstream
 package/dmalloc/0003-configure-allow-overriding-some-tests.patch lib_patch.Upstream
 package/dmalloc/0004-Makefile-use-the-configure-detected-or-user-supplied.patch lib_patch.Upstream
 package/dmalloc/0005-configure-use-LD-instead-of-hard-coding-ld.patch lib_patch.Upstream
 package/dmraid/0001-fix-compilation-under-musl.patch lib_patch.Upstream
 package/dmraid/S20dmraid lib_sysv.Variables
+package/docker-engine/S60dockerd Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/docopt-cpp/0001-only-build-one-target-use-BUILD_SHARED_LIBS-where-appropriate.patch lib_patch.Upstream
 package/domoticz/S99domoticz Shellcheck
 package/dovecot/0001-auth-Fix-handling-passdbs-with-identical-driver-args.patch lib_patch.Upstream
@@ -413,6 +455,8 @@ package/dvdrw-tools/0002-Include-sysmacros.h-to-compile-with-newer-gcc.patch lib
 package/earlyoom/0001-main.c-fix-build-with-kernel-4.3.patch lib_patch.Upstream
 package/earlyoom/S02earlyoom Shellcheck lib_sysv.Indent
 package/ebtables/0001-replace-ebtables-save-perl-script-with-bash.patch lib_patch.Upstream
+package/ebtables/0002-ebtables.h-restore-KERNEL_64_USERSPACE_32-checks.patch lib_patch.Upstream
+package/ebtables/0003-configure.ac-add-option-enable-kernel-64-userland-32.patch lib_patch.Upstream
 package/ecryptfs-utils/0001-musl.patch lib_patch.Upstream
 package/ecryptfs-utils/0002-openssl110.patch lib_patch.Upstream
 package/ecryptfs-utils/0003-fix-parallel-build-issue.patch lib_patch.Upstream
@@ -420,10 +464,17 @@ package/efl/0001-ecore_evas-engines-drm-meson.build-use-gl_deps-as-en.patch lib_
 package/efl/0002-ecore_evas-engines-drm-meson.build-fix-gl_drm-includ.patch lib_patch.Upstream
 package/efl/0003-ecore_fb-fix-build-with-tslib.patch lib_patch.Upstream
 package/eigen/0001-Adds-new-CMake-Options-for-controlling-build-compone.patch lib_patch.Upstream
+package/ejabberd/0001-Makefile.in-do-not-download-or-compile-dependencies.patch lib_patch.Upstream
+package/ejabberd/0002-fix-ejabberdctl.patch lib_patch.Upstream
+package/ejabberd/0003-correct-includes.patch lib_patch.Upstream
+package/ejabberd/S50ejabberd Shellcheck lib_sysv.Indent lib_sysv.Variables
+package/ejabberd/check-erlang-lib Shellcheck
 package/elftosb/0001-fixes-includes.patch lib_patch.Upstream
 package/elftosb/0002-force-cxx-compiler.patch lib_patch.Upstream
 package/elfutils/0001-Add-a-enable-disable-progs-configure-option.patch lib_patch.Upstream
 package/elfutils/0002-Really-make-Werror-conditional-to-BUILD_WERROR.patch lib_patch.Upstream
+package/erlang-p1-sip/0001-correct-include.patch lib_patch.Upstream
+package/erlang-p1-xmpp/0001-fix-includes.patch lib_patch.Upstream
 package/erlang-rebar/0001-src-rebar_port_compiler-add-fPIC-to-LDFLAGS-by-defau.patch lib_patch.Upstream
 package/espeak/0001-Fix-build-of-shared-library-on-architectures-needing.patch lib_patch.Upstream
 package/espeak/0002-tr_languages-cast-string_ordinal-init-values.patch lib_patch.Upstream
@@ -447,6 +498,13 @@ package/fbterm/0001-fbio.cpp-improxy.cpp-fbterm.cpp-fix-musl-compile.patch lib_p
 package/fbterm/0002-mouse.cpp-fix-musl-compile.patch lib_patch.Upstream
 package/fbterm/0003-C++11-compliance.patch lib_patch.Upstream
 package/fbterm/0004-iconv.patch lib_patch.Upstream
+package/fbv/0001-cross.patch lib_patch.Sob lib_patch.Upstream
+package/fbv/0002-fix-24bpp-support-on-big-endian.patch lib_patch.Sob lib_patch.Upstream
+package/fbv/0003-fix-bgr555.patch lib_patch.Upstream
+package/fbv/0004-giflib.patch lib_patch.Upstream
+package/fbv/0005-include.patch lib_patch.Sob lib_patch.Upstream
+package/fbv/0006-libpng15.patch lib_patch.Upstream
+package/fbv/0007-gif.c-fic-build-with-gcc-10.patch lib_patch.Upstream
 package/fcgiwrap/0001-use-LIBS-from-configure.patch lib_patch.Upstream
 package/fcgiwrap/0002-link-with-libsystemd-instead-of-libsystemd-daemon.patch lib_patch.Upstream
 package/ffmpeg/0001-swscale-x86-yuv2rgb-Fix-build-without-SSSE3.patch lib_patch.Upstream
@@ -483,6 +541,15 @@ package/gcc/8.4.0/0002-Revert-re-PR-target-92095-internal-error-with-O1-mcp.patc
 package/gcc/8.4.0/0003-libsanitizer-Remove-cyclades-from-libsanitizer.patch lib_patch.Upstream
 package/gcc/8.4.0/0004-disable-split-stack-for-non-thread-builds.patch lib_patch.Upstream
 package/gcr/0001-meson-Fix-unknown-kw-argument-in-gnome.generate_gir.patch lib_patch.Upstream
+package/gdb/13.2/0001-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch lib_patch.Upstream
+package/gdb/13.2/0002-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch lib_patch.Upstream
+package/gdb/13.2/0003-use-asm-sgidefs.h.patch lib_patch.Upstream
+package/gdb/13.2/0004-gdbserver-fix-build-for-m68k.patch lib_patch.Upstream
+package/gdb/13.2/0005-nat-fork-inferior-include-linux-ptrace.h.patch lib_patch.Upstream
+package/gdb/13.2/0006-Fix-getrandom-compile-for-uclibc-v1.0.35.patch lib_patch.Upstream
+package/gdb/13.2/0007-fix-musl-build-on-riscv.patch lib_patch.Upstream
+package/gdb/13.2/0008-gdbserver-Makefile.in-fix-NLS-build.patch lib_patch.Upstream
+package/gdb/13.2/0009-gdb-Fix-native-build-on-xtensa.patch lib_patch.Upstream
 package/gdb/14.2/0001-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch lib_patch.Upstream
 package/gdb/14.2/0002-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch lib_patch.Upstream
 package/gdb/14.2/0003-use-asm-sgidefs.h.patch lib_patch.Upstream
@@ -492,27 +559,20 @@ package/gdb/14.2/0006-Fix-getrandom-compile-for-uclibc-v1.0.35.patch lib_patch.U
 package/gdb/14.2/0007-fix-musl-build-on-riscv.patch lib_patch.Upstream
 package/gdb/14.2/0008-gdbserver-Makefile.in-fix-NLS-build.patch lib_patch.Upstream
 package/gdb/14.2/0009-gdb-Fix-native-build-on-xtensa.patch lib_patch.Upstream
-package/gdb/15.2/0001-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch lib_patch.Upstream
-package/gdb/15.2/0002-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch lib_patch.Upstream
-package/gdb/15.2/0003-use-asm-sgidefs.h.patch lib_patch.Upstream
-package/gdb/15.2/0004-gdbserver-fix-build-for-m68k.patch lib_patch.Upstream
-package/gdb/15.2/0005-nat-fork-inferior-include-linux-ptrace.h.patch lib_patch.Upstream
-package/gdb/15.2/0006-Fix-getrandom-compile-for-uclibc-v1.0.35.patch lib_patch.Upstream
-package/gdb/15.2/0007-fix-musl-build-on-riscv.patch lib_patch.Upstream
-package/gdb/15.2/0008-gdbserver-Makefile.in-fix-NLS-build.patch lib_patch.Upstream
-package/gdb/15.2/0009-gdb-Fix-native-build-on-xtensa.patch lib_patch.Upstream
-package/gdb/16.3/0001-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch lib_patch.Upstream
-package/gdb/16.3/0002-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch lib_patch.Upstream
-package/gdb/16.3/0003-use-asm-sgidefs.h.patch lib_patch.Upstream
-package/gdb/16.3/0004-gdbserver-fix-build-for-m68k.patch lib_patch.Upstream
-package/gdb/16.3/0005-nat-fork-inferior-include-linux-ptrace.h.patch lib_patch.Upstream
-package/gdb/16.3/0006-Fix-getrandom-compile-for-uclibc-v1.0.35.patch lib_patch.Upstream
-package/gdb/16.3/0007-fix-musl-build-on-riscv.patch lib_patch.Upstream
-package/gdb/16.3/0008-gdbserver-Makefile.in-fix-NLS-build.patch lib_patch.Upstream
-package/gdb/16.3/0009-gdb-Fix-native-build-on-xtensa.patch lib_patch.Upstream
+package/gdb/15.1/0001-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch lib_patch.Upstream
+package/gdb/15.1/0002-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch lib_patch.Upstream
+package/gdb/15.1/0003-use-asm-sgidefs.h.patch lib_patch.Upstream
+package/gdb/15.1/0004-gdbserver-fix-build-for-m68k.patch lib_patch.Upstream
+package/gdb/15.1/0005-nat-fork-inferior-include-linux-ptrace.h.patch lib_patch.Upstream
+package/gdb/15.1/0006-Fix-getrandom-compile-for-uclibc-v1.0.35.patch lib_patch.Upstream
+package/gdb/15.1/0007-fix-musl-build-on-riscv.patch lib_patch.Upstream
+package/gdb/15.1/0008-gdbserver-Makefile.in-fix-NLS-build.patch lib_patch.Upstream
+package/gdb/15.1/0009-gdb-Fix-native-build-on-xtensa.patch lib_patch.Upstream
 package/genpart/0001-fix-return-code.patch lib_patch.Upstream
+package/genromfs/0001-build-system.patch lib_patch.Sob lib_patch.Upstream
 package/gensio/0001-Fix-missing-EVP_PKEY_ED25519-build-error-on-libressl.patch lib_patch.Upstream
 package/gerbera/S99gerbera lib_sysv.Indent
+package/giblib/0001-fix-imlib2-detection.patch lib_patch.Upstream
 package/git-crypt/0001-fix-build-with-libressl-3.5.0.patch lib_patch.Upstream
 package/glorytun/0001-Add-support-for-Apple-silicon.patch lib_patch.Upstream
 package/glorytun/0002-aegis256.c-fix-aarch64-build-with-uclibc.patch lib_patch.Upstream
@@ -523,10 +583,12 @@ package/go/go-src/0001-build.go-explicit-option-for-crosscompilation.patch lib_p
 package/gob2/0001-dont-include-from-prefix.patch lib_patch.Upstream
 package/gobject-introspection/0001-disable-tests.patch lib_patch.Upstream
 package/gobject-introspection/0002-Add-rpath-links-to-ccompiler.patch lib_patch.Upstream
+package/gobject-introspection/0003-giscanner-ignore-error-return-codes-from-ldd-wrapper.patch lib_patch.Upstream
 package/gpsd/S50gpsd Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/gptfdisk/0001-gptcurses-partially-revert-Tweaks-for-building-on-th.patch lib_patch.Upstream
 package/graphite2/0001-don-t-install-a-libtool-file-with-static-library.patch lib_patch.Upstream
-package/grpc/0003-disable-unconditionally-downloading-api-repos.patch lib_patch.Upstream
+package/grpc/0002-wrap_memcpy.cc-add-GPR_DISABLE_WRAPPED_MEMCPY.patch lib_patch.Upstream
+package/grpc/0004-disable-unconditionally-downloading-api-repos.patch lib_patch.Upstream
 package/gstreamer1/gstd/0001-Don-t-require-gstd-check-user-xenv.sh-for-systemd-se.patch lib_patch.Upstream
 package/guile/0001-calculate-csqrt_manually.patch lib_patch.Upstream
 package/guile/0002-Makefile.am-fix-build-without-makeinfo.patch lib_patch.Upstream
@@ -541,6 +603,8 @@ package/heirloom-mailx/0001-fix-libressl-support.patch lib_patch.Upstream
 package/hplip/0001-build-use-pkg-config-to-discover-libusb.patch lib_patch.Upstream
 package/hplip/0002-configure.in-fix-AM_INIT_AUTOMAKE-call.patch lib_patch.Upstream
 package/htpdate/S43htpdate Shellcheck
+package/httping/0001-fix-math-library-linking.patch lib_patch.Upstream
+package/httping/0002-Makefile-allow-build-without-gettext.patch lib_patch.Upstream
 package/i2pd/S99i2pd Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/i7z/0001-fix-build-with-gcc-10.patch lib_patch.Upstream
 package/ibm-sw-tpm2/0001-Use-LONG_BIT-to-define-RADIX_BITS.patch lib_patch.Upstream
@@ -580,6 +644,7 @@ package/ipmitool/0002-Fix-enterprise-numbers-URL.patch lib_patch.Upstream
 package/ipmitool/0003-Do-not-require-the-IANA-PEN-registry-file.patch lib_patch.Upstream
 package/ipmitool/0004-configure.ac-allow-disabling-registry-downloads.patch lib_patch.Upstream
 package/iprutils/0001-configure.ac-add-AC_USE_SYSTEM_EXTENSIONS.patch lib_patch.Upstream
+package/iptables/S35iptables Shellcheck
 package/irda-utils/0001-daemon.patch lib_patch.Sob lib_patch.Upstream
 package/irda-utils/0002-nommu.patch lib_patch.Sob lib_patch.Upstream
 package/irda-utils/0003-subdir.patch lib_patch.Sob lib_patch.Upstream
@@ -597,6 +662,7 @@ package/keyutils/0001-fix-install-rule.patch lib_patch.Upstream
 package/keyutils/0002-cifs.patch lib_patch.Sob lib_patch.Upstream
 package/kmod/0001-fix-O_CLOEXEC.patch lib_patch.Upstream
 package/kodi/S50kodi Shellcheck lib_sysv.Variables
+package/latencytop/0001-makefile.patch lib_patch.Upstream
 package/lbase64/0001-retro-compatible-with-Lua-5.1.patch lib_patch.Upstream
 package/lcdproc/0001-LCDd.conf.patch lib_patch.Upstream
 package/lcdproc/0002-Add-missing-ioctl-header.patch lib_patch.Upstream
@@ -616,6 +682,7 @@ package/libavl/0001-fix-makefile.patch lib_patch.Upstream
 package/libb64/0001-Integer-overflows.patch lib_patch.Upstream
 package/libb64/0002-Initialize-C++-objects.patch lib_patch.Upstream
 package/libcdaudio/0001-libcdaudio-enable-autoreconf.patch lib_patch.Upstream
+package/libcec/0001-cecloader-h-fix-null-return.patch lib_patch.Upstream
 package/libcgi/0001-CMakeLists.txt-honour-BUILD_TESTING.patch lib_patch.Upstream
 package/libcgicc/0001-disable-documentation-option.patch lib_patch.Sob lib_patch.Upstream
 package/libconfuse/0001-Fix-163-unterminated-username-used-with-getpwnam.patch lib_patch.Upstream
@@ -628,6 +695,8 @@ package/libdvbcsa/0001-altivec-powerpc64.patch lib_patch.Upstream
 package/libeXosip2/0001-src-eXtl_dtls.c-fix-build-with-libressl-3.4.1.patch lib_patch.Upstream
 package/libedit/0001-check-bsd-functions-in-libbsd.patch lib_patch.Upstream
 package/libevent/0001-Don-t-define-BIO_get_init-for-LibreSSL-3-5.patch lib_patch.Upstream
+package/libfcgi/0001-link-against-math.patch lib_patch.Upstream
+package/libfcgi/0002-disable-examples.patch lib_patch.Upstream
 package/libffi/0001-Fix-use-of-compact-eh-frames-on-MIPS.patch lib_patch.Upstream
 package/libfm/0001-modules-fix-cross-compilation.patch lib_patch.Upstream
 package/libfreeimage/0001-no-root-install.patch lib_patch.Upstream
@@ -642,11 +711,17 @@ package/libftdi1/0003-CMakeLists.txt-fix-static-build-with-libusb-and-lato.patch
 package/libfuse/0001-fix-aarch64-build.patch lib_patch.Upstream
 package/libfuse/0002-util-ulockmgr_server-c-conditionally-define-closefrom-fix-glibc-2-34.patch lib_patch.Upstream
 package/libgcrypt/0001-configure.ac-add-an-option-to-disable-tests.patch lib_patch.Upstream
+package/libglfw/0001-Wayland-Remove-extra-cmake-modules-dependency.patch lib_patch.Upstream
 package/libgpiod/0001-build-add-a-configure-switch-for-building-examples.patch lib_patch.Upstream
 package/libgsm/0001-Misc-fixes-from-Archlinux.patch lib_patch.Upstream
 package/libgtk2/0001-reduce-dependencies.patch lib_patch.Upstream
 package/libgtk3/0001-Remove-Gdk-dependency-from-gtk-encode-symbolic-svg.patch lib_patch.Upstream
 package/libhdhomerun/0001-dont-strip.patch lib_patch.Upstream
+package/libhid/0001-dont-fiddle-with-debug-flags.patch lib_patch.Upstream
+package/libhid/0002-no-newline-in-ldflags.patch lib_patch.Upstream
+package/libhid/0003-uclinux.patch lib_patch.Upstream
+package/libical/0001-no-tests.patch lib_patch.Upstream
+package/libical/0002-icaltypes-c-icalreqstattype_from_string-copy-the-reqstattype.patch lib_patch.Upstream
 package/libiio/S99iiod Shellcheck lib_sysv.Variables
 package/libiqrf/0001-cmake-handle-static-library-and-find-required-thread.patch lib_patch.Upstream
 package/libiqrf/0002-use-only-c-language.patch lib_patch.Upstream
@@ -664,7 +739,8 @@ package/libloki/0002-use-ln-snf.patch lib_patch.Upstream
 package/libmad/0001-mips-h-constraint-removal.patch lib_patch.Sob lib_patch.Upstream
 package/libmad/0002-configure-ac-automake-foreign.patch lib_patch.Upstream
 package/libmng/0001-jpeg-9a.patch lib_patch.Upstream
-package/libmodsecurity/0001-modsecurity.pc.in-add-lstdc.patch lib_patch.Upstream
+package/libmodsecurity/0001-configure.ac-drop-usage-of-git-at-configure-time.patch lib_patch.Upstream
+package/libmodsecurity/0002-modsecurity.pc.in-add-lstdc.patch lib_patch.Upstream
 package/libmpeg2/0001-altivec.patch lib_patch.Upstream
 package/libmpeg2/0002-armv4l.patch lib_patch.Upstream
 package/libmpeg2/0003-fix-arm-detection.patch lib_patch.Upstream
@@ -694,6 +770,7 @@ package/libselinux/0001-Do-not-use-PYCEXT-and-rely-on-the-installed-file-nam.pat
 package/libsepol/0001-support-static-only.patch lib_patch.Upstream
 package/libserial/0001-SerialPort.cpp-fix-build-when-size_t-is-an-unsigned-.patch lib_patch.Upstream
 package/libserial/0002-SerialPort.cpp-don-t-use-high-baudrates-when-not-ava.patch lib_patch.Upstream
+package/libserialport/0001-uclinux-detection.patch lib_patch.Upstream
 package/libshdata/0001-backend-Add-missing-include-files.patch lib_patch.Upstream
 package/libshdata/0002-examples-stress_test-Fix-build-with-musl-libc.patch lib_patch.Upstream
 package/libsidplay2/0001-sidplay2-libs-2.1.1.patch lib_patch.Upstream
@@ -734,6 +811,10 @@ package/lighttpd/S50lighttpd Shellcheck lib_sysv.EmptyLastLine lib_sysv.Indent l
 package/linknx/0001-configure-ac-tweak-CPPUNIT-conditional.patch lib_patch.Upstream
 package/linknx/0002-src-Makefile.am-fix-linking-with-log4cpp.patch lib_patch.Upstream
 package/linphone/0001-src-core-paths-paths.cpp-fix-powerpc-build.patch lib_patch.Upstream
+package/linux-fusion/0001-fix-for-linux-4-and-above.patch lib_patch.Upstream
+package/linux-fusion/0002-Fix-mismatched-conversion-spec-and-value-in-printk.patch lib_patch.Upstream
+package/linux-fusion/0003-Fix-fusion-Unknown-symbol-tasklist_lock-err-0.patch lib_patch.Upstream
+package/linux-fusion/0004-Port-one-one_udp.c-to-Linux-4.1.patch lib_patch.Upstream
 package/linux-zigbee/0001-test-serial-Remove-test-serial.patch lib_patch.Upstream
 package/linux-zigbee/0002-addrdb-coord-config-parse.y-add-missing-time.h-inclu.patch lib_patch.Upstream
 package/linuxptp/S65ptp4l Shellcheck lib_sysv.Indent
@@ -741,6 +822,9 @@ package/linuxptp/S66phc2sys Shellcheck lib_sysv.Indent
 package/lirc-tools/0001-plugins-devinput.c-fix-build-with-musl-1.2.0.patch lib_patch.Upstream
 package/lirc-tools/0002-configure-add-disable-doc-option.patch lib_patch.Upstream
 package/lirc-tools/S25lircd lib_sysv.Indent lib_sysv.Variables
+package/lite/0001-dfbspy-stat.patch lib_patch.Sob lib_patch.Upstream
+package/lite/0002-no-tests.patch lib_patch.Sob lib_patch.Upstream
+package/lite/0003-pkg-config.patch lib_patch.Sob lib_patch.Upstream
 package/live555/0001-Add-a-pkg-config-file-for-the-shared-libraries.patch lib_patch.Upstream
 package/lldpd/S60lldpd Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/llvm-project/clang/0001-lib-Driver-ToolChains-Gnu-Use-GCC_INSTALL_PREFIX-in-.patch lib_patch.Upstream
@@ -774,6 +858,7 @@ package/lugaru/0001-ImageIO-fix-invalid-conversion.patch lib_patch.Upstream
 package/lugaru/0002-Fix-mismatched-usage-length-build-fail-on-g.patch lib_patch.Upstream
 package/lvm2/0001-cmdline-use-freopen-to-reopen-standard-streams.patch lib_patch.Upstream
 package/lvm2/0002-log-use-freopen-to-reopen-standard-streams.patch lib_patch.Upstream
+package/lz4/0001-build-Support-BUILD_SHARED-no.patch lib_patch.Upstream
 package/lzma/0001-Remove-static-from-LDFLAGS.patch lib_patch.Upstream
 package/lzop/0001-allow-overriding-modification-time.patch lib_patch.Upstream
 package/macchanger/0001-Fix-missing-include-for-caddr_t.patch lib_patch.Upstream
@@ -807,18 +892,23 @@ package/metacity/0002-gconf.patch lib_patch.Upstream
 package/metacity/0003-mag-add-libm-reference.patch lib_patch.Upstream
 package/mfgtools/0001-lnx_def.h-fix-conflicting-declaration-of-__time64_t.patch lib_patch.Upstream
 package/mii-diag/0001-strchr.patch lib_patch.Sob lib_patch.Upstream
+package/mimic/0001-Fix-linking-on-gcc-10.2.0-or-newer.patch lib_patch.Upstream
 package/mini-snmpd/0001-linux.c-fix-musl-build.patch lib_patch.Upstream
 package/minidlna/S60minidlnad Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/minissdpd/S50minissdpd Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/modem-manager/S44modem-manager Shellcheck lib_sysv.Variables
+package/mongodb/0001-ssl_manager.cpp-fix-build-with-gcc-7-and-fpermissive.patch lib_patch.Upstream
+package/mongodb/0002-src-mongo-db-exec-plan_stats.h-fix-build-with-gcc-11.patch lib_patch.Upstream
 package/mongrel2/0001-Do-not-run-tests.patch lib_patch.Upstream
 package/mongrel2/0002-Fix-Makefiles-for-cross-compilation.patch lib_patch.Upstream
-package/monit/0001-Do-not-force-building-a-statically-linked-binary.patch lib_patch.Upstream
+package/monit/0001-no-force-static.patch lib_patch.Upstream
 package/mono-gtksharp3/0001-Fixes-MONO_PROFILE_ENTER_LEAVE-undeclared.patch lib_patch.Upstream
 package/mono-gtksharp3/0002-Mono-compilation-error-branch.patch lib_patch.Upstream
 package/mono/0001-Fix-linkage-with-a-system-libatomic_ops-shared-library.patch lib_patch.Upstream
 package/mono/0002-Ongoing-work-on-the-cmake-build.patch lib_patch.Upstream
+package/mosquitto/S50mosquitto Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/motion/S99motion Shellcheck lib_sysv.Indent lib_sysv.Variables
+package/mpd/0001-src-event-meson.build-add-atomic-dependency-for-spar.patch lib_patch.Upstream
 package/mpir/0001-mpn-arm-udiv.asm-workaround-binutils-bug-14887.patch lib_patch.Upstream
 package/mpv/0001-fix-powerpc64-altivec.patch lib_patch.Upstream
 package/mraa/0001-include-Declare-gVERSION-global-as-extern.patch lib_patch.Upstream
@@ -841,6 +931,7 @@ package/neard/S53neard Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/neardal/0001-lib-neardal.h-fix-build-with-gcc-10.patch lib_patch.Upstream
 package/netatalk/S50netatalk lib_sysv.EmptyLastLine lib_sysv.Indent lib_sysv.Variables
 package/netcat/0001-signed-bit-counting.patch lib_patch.Sob lib_patch.Upstream
+package/netopeer2/S52netopeer2 Shellcheck lib_sysv.Variables
 package/netperf/0001-src-nettest_omni.c-fix-compilation-with-GCC10.patch lib_patch.Upstream
 package/netplug/0001-makefile-flags.patch lib_patch.Sob lib_patch.Upstream
 package/netplug/0002-add-missing-time-include.patch lib_patch.Upstream
@@ -879,6 +970,7 @@ package/nss-pam-ldapd/S45nslcd Shellcheck lib_sysv.EmptyLastLine lib_sysv.Indent
 package/ntp/0001-ntp-syscalls-fallback.patch lib_patch.Upstream
 package/ntp/S49ntp.in lib_sysv.Variables
 package/ntpsec/0001-wscript-remove-checks-for-bsd-string.h-fixes-host-co.patch lib_patch.Upstream
+package/numactl/0001-link-with-latomic-if-needed-again.patch lib_patch.Upstream
 package/nuttcp/0001-susv3-legacy.patch lib_patch.Upstream
 package/nvidia-driver/0001-use-LDFLAGS.patch lib_patch.Upstream
 package/octave/0001-Fix-BLAS-library-integer-size-detection.patch lib_patch.Upstream
@@ -964,7 +1056,9 @@ package/pifmrds/0003-Makefile-fix-static-link.patch lib_patch.Upstream
 package/pigpio/S50pigpio Shellcheck lib_sysv.Variables
 package/pistache/0001-src-common-transport.cc-fallback-value-for-RUSAGE_TH.patch lib_patch.Upstream
 package/pistache/0002-src-server-listener.cc-fix-libressl-build.patch lib_patch.Upstream
+package/pixman/0001-Disable-tests.patch lib_patch.Upstream
 package/pkgconf/0001-Only-prefix-with-the-sysroot-a-subset-of-variables.patch lib_patch.Upstream
+package/pkgconf/0002-Revert-main-assume-modversion-insted-of-version-if-o.patch lib_patch.Upstream
 package/pkgconf/pkg-config.in Shellcheck
 package/poke/0001-configure.ac-HELP2MAN-replace-by-true-when-cross-com.patch lib_patch.Upstream
 package/policycoreutils/0001-Add-DESTDIR-to-all-paths-that-use-an-absolute-path.patch lib_patch.Upstream
@@ -974,11 +1068,13 @@ package/pptp-linux/0001-susv3-legacy.patch lib_patch.Upstream
 package/pptp-linux/0002-fix-parallel-build.patch lib_patch.Upstream
 package/prboom/0001-libpng-1.4.patch lib_patch.Upstream
 package/prboom/0002-configure-remove-predefined-O2-optimization-flag.patch lib_patch.Upstream
+package/prelink-cross/0001-src-rtld-dl-tls.c-Fix-TLS-offsets-computation-for-s3.patch lib_patch.Upstream
 package/procps-ng/S02sysctl lib_sysv.Variables
 package/proftpd/S50proftpd Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/prosody/0001-enable-syslog.patch lib_patch.Upstream
 package/prosody/0002-add-pidfile.patch lib_patch.Upstream
 package/prosody/S50prosody Shellcheck lib_sysv.Indent lib_sysv.Variables
+package/protozero/0001-CMakeLists.txt-protobuf-is-only-needed-for-tests.patch lib_patch.Upstream
 package/proxychains-ng/0001-add-configure-check-for-non-POSIX-compliant-getnameinfo-signature.patch lib_patch.Upstream
 package/ptpd/S65ptpd Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/ptpd2/0001-musl.patch lib_patch.Upstream
@@ -989,6 +1085,9 @@ package/pulseaudio/0001-shm.c-use-_Static_assert-instead-of-static_assert-fo.pat
 package/pulseaudio/S50pulseaudio lib_sysv.ConsecutiveEmptyLines lib_sysv.EmptyLastLine lib_sysv.Indent lib_sysv.Variables
 package/pulseview/0001-Replace-obsolete-deprecated-Qt-methods.patch lib_patch.Upstream
 package/pulseview/0002-Fix-broken-build-due-to-C-template-behind-C-linkage.patch lib_patch.Upstream
+package/python-aiohttp-remotes/0001-Fix-flit_core-build-requires-backend.patch lib_patch.Upstream
+package/python-automat/0001-Remove-uneeded-dependency-to-wheel.patch lib_patch.Upstream
+package/python-daphne/0001-remove-pytest-runner-requirement.patch lib_patch.Upstream
 package/python-pybind/0001-pybind11-commands.py-support-STAGING_DIR.patch lib_patch.Upstream
 package/python-pylibftdi/0001-do-not-use-find-library.patch lib_patch.Upstream
 package/python-pyqt5/0001-configure-skip-qtdetail.patch lib_patch.Upstream
@@ -999,6 +1098,18 @@ package/python-scipy/0001-build-sh4-FE.patch lib_patch.Upstream
 package/python-setuptools/0001-add-executable.patch lib_patch.Upstream
 package/python-sip/0001-remove-join-from-sip-h-files-string.patch lib_patch.Upstream
 package/python-web2py/S51web2py Shellcheck lib_sysv.Variables
+package/python-ws4py/0001-Adjust-ws4py-for-Python-3.7-syntax.patch lib_patch.Upstream
+package/python3/0001-Make-the-build-of-pyc-files-conditional.patch lib_patch.Upstream
+package/python3/0002-Disable-buggy_getaddrinfo-configure-test-when-cross-.patch lib_patch.Upstream
+package/python3/0003-Add-an-option-to-disable-pydoc.patch lib_patch.Upstream
+package/python3/0004-Add-an-option-to-disable-lib2to3.patch lib_patch.Upstream
+package/python3/0005-Add-an-option-to-disable-IDLE.patch lib_patch.Upstream
+package/python3/0006-configure.ac-move-PY_STDLIB_MOD_SET_NA-further-up.patch lib_patch.Upstream
+package/python3/0007-Add-option-to-disable-the-sqlite3-module.patch lib_patch.Upstream
+package/python3/0008-Add-an-option-to-disable-the-tk-module.patch lib_patch.Upstream
+package/python3/0009-Add-an-option-to-disable-the-curses-module.patch lib_patch.Upstream
+package/python3/0010-Add-an-option-to-disable-expat.patch lib_patch.Upstream
+package/python3/0011-configure.ac-fixup-CC-print-multiarch-output-for-mus.patch lib_patch.Upstream
 package/qextserialport/0001-Create-a-main-include-file-QExtSerialPort.patch lib_patch.Upstream
 package/qextserialport/0002-Tell-qmake-to-add-a-pkgconfig-file-to-ease-usage-wit.patch lib_patch.Upstream
 package/qt5/qt5base/0001-qtbase-Fix-build-error-when-using-EGL.patch lib_patch.Upstream
@@ -1026,8 +1137,12 @@ package/qt5/qt5webkit/0004-Remove-invalid-g_object-declarations-to-fix-build-wi.
 package/qt5/qt5webkit/0005-Add-support-for-ARC-processors.patch lib_patch.Upstream
 package/qt5/qt5webkit/0006-Warnings-due-to-AppSinkCallbacks-struct-growth-https.patch lib_patch.Upstream
 package/qt5cinex/0001-Fix-execution-problem-with-Qt5.3.patch lib_patch.Upstream
+package/quagga/0001-fix-ipctl-forwarding.patch lib_patch.Upstream
+package/quagga/0002-lib-prefix.h-fix-build-with-gcc-10.patch lib_patch.Upstream
+package/quagga/0003-Fix-build-with-gcc-10.patch lib_patch.Upstream
 package/racehound/0001-Fix-module-install-path-lib-instead-of-usr-lib-prefi.patch lib_patch.Upstream
 package/rapidxml/0001-ensure-internal-print-operations-are-declared-before.patch lib_patch.Upstream
+package/raspberrypi-usbboot/0001-Makefile-allow-passing-CFLAGS-LDFLAGS.patch lib_patch.Upstream
 package/read-edid/0001-Fix-install-file-list.patch lib_patch.Upstream
 package/read-edid/0002-Fix-compiler-check.patch lib_patch.Upstream
 package/read-edid/0003-fix-build-with-gcc-10.patch lib_patch.Upstream
@@ -1041,6 +1156,7 @@ package/ripgrep/0001-puts-jemalloc-allocator-behind-a-cargo-feature-flag.patch l
 package/riscv-isa-sim/0001-riscv-disable-precompiled-headers.patch lib_patch.Upstream
 package/rng-tools/S21rngd Shellcheck lib_sysv.Variables
 package/rocksdb/0001-build_tools-build_detect_platform-fix-C-tests.patch lib_patch.Upstream
+package/rp-pppoe/0001-src-pppoe.h-fix-build-with-musl-libc.patch lib_patch.Upstream
 package/rpcbind/0001-Remove-yellow-pages-support.patch lib_patch.Upstream
 package/rpcbind/S30rpcbind lib_sysv.EmptyLastLine lib_sysv.Indent lib_sysv.Variables
 package/rpi-userland/0001-Add-.pc-files-for-the-OpenGLESv2-EGL-and-bcm_host-li.patch lib_patch.Upstream
@@ -1061,13 +1177,17 @@ package/samba4/0001-build-find-pre-built-heimdal-build-tools-in-case-of-.patch l
 package/samba4/0002-ldap_message_test.c-include-stdint.h-before-cmoka.h.patch lib_patch.Upstream
 package/samba4/S91smb Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/sane-backends/0001-sane_backend-add-missing-config.h.patch lib_patch.Upstream
-package/screen/0001-Do-not-create-backup-of-old-installed-binary.patch lib_patch.Upstream
-package/screen/0002-Change-binary-permission-flags-even-if-chown-fails.patch lib_patch.Upstream
-package/screen/0003-Support-overriding-SCREEN-to-get-a-non-versioned-bin.patch lib_patch.Upstream
-package/screen/0004-Renamed-sched.h-to-eventqueue.h.patch lib_patch.Upstream
+package/screen/0001-Do-not-use-memcpy-as-an-alternative-for-bcopy-memmov.patch lib_patch.Upstream
+package/screen/0002-Do-not-create-backup-of-old-installed-binary.patch lib_patch.Upstream
+package/screen/0003-Change-binary-permission-flags-even-if-chown-fails.patch lib_patch.Upstream
+package/screen/0004-Support-overriding-SCREEN-to-get-a-non-versioned-bin.patch lib_patch.Upstream
+package/screen/0005-Renamed-sched.h-to-eventqueue.h.patch lib_patch.Upstream
+package/screen/0006-comm.h-now-depends-on-term.h.patch lib_patch.Upstream
+package/screen/0007-comm.h-needed-for-list_-display-generic-.o.patch lib_patch.Upstream
 package/scrub/0001-configure-ac-make-sure-m4-macros-are-included-in-the-build.patch lib_patch.Upstream
-package/sdl/0001-fix-compilation-with-libx11.patch lib_patch.Upstream
-package/sdl/0002-SDL_x11yuv.c-fix-possible-use-after-free.patch lib_patch.Upstream
+package/sdl/0001-use-correct-directfb-config.patch lib_patch.Upstream
+package/sdl/0002-fix-compilation-with-libx11.patch lib_patch.Upstream
+package/sdl/0003-SDL_x11yuv.c-fix-possible-use-after-free.patch lib_patch.Upstream
 package/sdl_mixer/0001-Add-Libs.private-field-to-pkg-config-file.patch lib_patch.Upstream
 package/sdl_mixer/0002-configure__set_macro_directory.patch lib_patch.Upstream
 package/sdl_mixer/0003-configure.ac-fix-static-linking-with-tremor.patch lib_patch.Upstream
@@ -1137,6 +1257,7 @@ package/suricata/0001-configure.ac-allow-the-user-to-override-RUST_TARGET.patch
 package/suricata/S99suricata Shellcheck
 package/swupdate/swupdate.sh Shellcheck
 package/sylpheed/0001-harden-link-checker-before-accepting-click.patch lib_patch.Upstream
+package/sysrepo/S51sysrepo-plugind Shellcheck lib_sysv.Indent
 package/sysvinit/0001-Makefile-disable-stack-protector-strong.patch lib_patch.Upstream
 package/tar/0001-lib-getrandom.c-fix-build-with-uclibc-1.0.35.patch lib_patch.Upstream
 package/targetcli-fb/S50target Shellcheck lib_sysv.Variables
@@ -1180,6 +1301,7 @@ package/uemacs/01-clear-ixon-termios-flag.patch lib_patch.Upstream
 package/uhd/0001-host-CMakeLists-add-boost-unit_test_framework-requir.patch lib_patch.Upstream
 package/uhttpd/0001-Remove-Werror.patch lib_patch.Upstream
 package/uhttpd/0002-Fix-TCP_FASTOPEN-related-compile-error.patch lib_patch.Upstream
+package/umtprd/0001-Fix-output_dir-make-dependency.patch lib_patch.Upstream
 package/unbound/S70unbound Shellcheck
 package/unifdef/0001-Makefile-fix-error-on-install.patch lib_patch.Upstream
 package/unscd/S46unscd Shellcheck lib_sysv.Indent lib_sysv.Variables
@@ -1230,12 +1352,15 @@ package/vte/0002-build-Fix-check-for-fstack-protector-compiler-support.patch lib
 package/vtun/0001-fix-installation.patch lib_patch.Upstream
 package/vtun/0002-fix-ssl-headers-checks.patch lib_patch.Upstream
 package/vtun/0003-openssl11.patch lib_patch.Upstream
+package/w_scan/0001-musl.patch lib_patch.Upstream
+package/w_scan/0002-si_types-h-fix-build-with-gcc-10.patch lib_patch.Upstream
 package/waffle/0001-cmake-forward-cflags-from-.pc-files-to-waffle-cflags.patch lib_patch.Upstream
 package/waffle/0002-wayland-fix-build-against-version-1-20.patch lib_patch.Upstream
 package/waffle/0003-drop-C-dependency.patch lib_patch.Upstream
 package/wampcc/0001-Add-RISC-V-endian-detection.patch lib_patch.Upstream
 package/wampcc/0002-include-wampcc-platform.h-fix-build-with-musl-1.2.0.patch lib_patch.Upstream
 package/wampcc/0003-Broken-build-on-Windows.patch lib_patch.Upstream
+package/watchdogd/S01watchdogd NotExecutable lib_sysv.Indent
 package/wget/0001-lib-getrandom.c-fix-build-with-uclibc-1.0.35.patch lib_patch.Upstream
 package/wilc-driver/0001-cfg80211.c-fix-missing-prandom_u32-with-Linux-6.1.0.patch lib_patch.Upstream
 package/wilc-driver/0002-spi.c-fix-build-failure-on-remove-callback.patch lib_patch.Upstream
@@ -1244,6 +1369,7 @@ package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.pa
 package/wilc-driver/0005-Fix-cast-warnings.patch lib_patch.Upstream
 package/wipe/0001-musl.patch lib_patch.Upstream
 package/wireless_tools/0001-remove-bzero.patch lib_patch.Upstream
+package/wireshark/0001-cmake-lemon-wipe-CMAKE_-EXE_LINKER_FLAGS-SYSROOT-if-.patch lib_patch.Upstream
 package/woff2/0001-CMake-Handle-multiple-libraries-being-returned-for-B.patch lib_patch.Upstream
 package/wpa_supplicant/ifupdown.sh Shellcheck
 package/x11r7/xapp_luit/0001-posix-openpt.patch lib_patch.Upstream
@@ -1270,10 +1396,15 @@ package/x11r7/xdriver_xf86-video-nouveau/0001-nouveau-fixup-driver-for-new-X-ser
 package/x11r7/xdriver_xf86-video-tdfx/0001-cross.patch lib_patch.Upstream
 package/x11r7/xserver_xorg-server/0001-include-misc.h-fix-uClibc-build.patch lib_patch.Upstream
 package/x11r7/xserver_xorg-server/S40xorg Shellcheck lib_sysv.Variables
+package/x11vnc/0001-Fix-build-on-32bit-arches-with-64bit-time_t.patch lib_patch.Upstream
+package/x11vnc/0002-scan-limit-access-to-shared-memory-segments-to-current-user.patch lib_patch.Upstream
 package/xen/0001-9pfs-include-linux-limits.h-for-XATTR_SIZE_MAX.patch lib_patch.Upstream
 package/xen/0002-Fix-build-with-64-bits-time_t.patch lib_patch.Upstream
 package/xen/0003-libs-light-fix-tv_sec-printf-format.patch lib_patch.Upstream
 package/xen/0004-libs-light-fix-tv_sec-fprintf-format.patch lib_patch.Upstream
+package/xenomai/3.0.10/0001-lib-boilerplate-iniparser-Allow-building-with-GCC-10-2-2020101.patch lib_patch.Upstream
+package/xenomai/3.0.10/0002-Add-disable-demo-testsuite-options.patch lib_patch.Upstream
+package/xenomai/3.0.10/0003-lib-cobalt-copperplate-Use-valid-addresses-for-pthread_setspecific.patch lib_patch.Upstream
 package/xinetd/0001-ar.patch lib_patch.Upstream
 package/xinetd/0002-destdir.patch lib_patch.Upstream
 package/xinetd/0003-rpc-fix.patch lib_patch.Upstream

.defconfig

@@ -12,6 +12,7 @@ BR2_i386=y
 # BR2_m68k is not set
 # BR2_mips is not set
 # BR2_mipsel is not set
+# BR2_nios2 is not set
 # BR2_powerpc is not set
 # BR2_sh is not set
 # BR2_sparc is not set

.gitlab-ci.yml

@@ -1,7 +1,7 @@
 # Configuration for Gitlab-CI.
 # Builds appear on https://gitlab.com/buildroot.org/buildroot/pipelines
 
-image: $CI_REGISTRY/buildroot.org/buildroot/base:20250218.2110
+image: $CI_REGISTRY/buildroot.org/buildroot/base:20230207.1123
 
 stages:
   - generate-gitlab-ci

CHANGES

@@ -1,546 +1,3 @@
-2025.05-rc1, released May 19th, 2025
-
-	Fixes all over the tree and package updates.
-
-	Download:
-
-	- Rust updated to version 1.86.0, which has slightly changed
-	  the cargo fetching behaviour, so the generated tarballs now
-	  use a -cargo4 suffix to reflect that.
-
-	- Subversion download logic is now reproducible with non-US
-	  locales
-
-	- Sources can now be fetched from a smb:// location (using
-	  curl).
-
-	Dependencies:
-
-	- AWK is now required on the build host.
-
-	Toolchains:
-
-	- Bootlin ARMv7-A toolchains are now also available for
-	  ARMv8-A CPUs in 32bit mode
-
-	Misc:
-
-	- /etc/resolv.conf symlink now points to /run rather than /tmp
-
-	- support/scripts/pkg-stats can now report stale CVE entries,
-	  E.G. entries in <PKG>_IGNORE_CVES that are no longer needed
-	  after a NVD update.
-
-	New defconfigs: Engicam PX30 SOM, Freescale i.IM 91 EVK and 93
-	Freedom, HiFive Unmatched, Pine64 ROCKPro64 EBBR boot,
-	Raspberrypi 2 in 64bit mode, Sipeed LicheePi 4A
-
-	New packages: aardvark-dns, amazon-ecr-credential-helper,
-	casync-nano, cgroupfs-v2-mount, docker-credential-acr-env,
-	docker-credential-gcr, grout, lowdown, lpac,
-	mender-update-modules, netavark, passt, podman,
-	python-aniso8601, python-cachelib, python-emailproxy,
-	python-flask-caching, python-flask-restx, python-mypy,
-	python-pyproj, python-simple-pid, python-smbus2,
-	python-types-psutil, python-types-setuptools,
-	python-typing-inspection, python-tzlocal,
-	qoriq-ddr-phy-binary, qoriq-firmware-inphi, qoriq-mc-binary,
-	qoriq-mc-utils, sane-airscan, sipeed-lpi4abin, ufs-utils,
-	xilinx-fpgautil
-
-	Issues resolved:
-
-	- openh264's build/ should not be removed
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/64
-
-	- package/dbus: incorrect session bus configuration file..
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/67
-
-	- Update pkcs11-tool to v1.9.1
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/109
-
-	- netsnmp: unexpected header length in /proc/net/snmp...
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/110
-
-2025.02.3, released May 19th, 2025
-	Build issues and other problems solved for packages:
-
-        libcap
-
-2025.02.2, released May 18th, 2025
-
-	Important / security related fixes:
-
-	- openvpn: CVE-2025-2704
-	- ghostscript: CVE-2025-27830, CVE-2025-27831, CVE-2025-27832,
-		CVE-2025-27833, CVE-2025-27834, CVE-2025-27835,
-		CVE-2025-27836, CVE-2025-27837,
-	- libfcgi: CVE-2025-23016
-	- perl: CVE-2024-56406
-	- mosquitto: CVE-2023-28366
-	- c-ares: CVE-2025-31498
-	- graphicsmagick: CVE-2025-32460, CVE-2025-27795
-	- libxml2: CVE-2025-32414, CVE-2025-32415
-	- wireshark: CVE-2025-1492
-	- yam: CVE-2021-33454
-	- sqlite: CVE-2025-29087
-	- xz: CVE-2025-31115
-	- python-django: CVE-2025-32873
-	- libraw: CVE-2025-43961, CVE-2025-43962, CVE-2025-43963,
-	    CVE-2025-43964
-	- dropbear: CVE-2025-47203
-	- intel-microcode: CVE-2025-24495, CVE-2024-28956, CVE-2024-43420,
-	    CVE-2025-20103
-	- openssh: CVE-2025-32728
-	- screen: CVE-2025-23395, CVE-2025-46802, CVE-2025-46803,
-	    CVE-2025-46804, CVE-2025-46805
-	- python-flask: CVE-2025-47278
-	- python-h11: CVE-2025-43859
-	- postgresql: CVE-2025-4207
-
-	Updated / fixed packages: sysklogd, libfcgi, double-conversion,
-	igh-ethercat, c-periphery, socat, lua-periphery, fluent-bit,
-	samba4, ca-certificates, dbus-cxx, atkmm2_28, pangomm2_46,
-	cairomm1_14, glibmm2_66, gtkmm3, file, opencsd, libopenmpt,
-	fwts, libtracefs, iproute2, ripgrep, bat, dust, trace-cmd,
-	libubootenv, micropython, python-cryptography, dnsmasq,
-	wireless-regdb, python-setuptools, libuci, libubox, ubus, waf,
-	armadillo, ncftp, expat, libxml2, wireshark, hiredis, zfs,
-	sunxi-mali-utgard-driver, ruby, mtools, hwdata, traceroute,
-	zic, tzdata, jo, gdb, tpm2-pkcs11, nss-pam-ldapd, ghostscript,
-	dropbear, intel-microcode, screen, python-flask, python-h11,
-	mariadb, ffmpeg, postgresql
-
-	Test Improvements:
-
-	- test_edk2: add a few build tests
-	- weston: fix the weston shutdown test
-	- lighttpd: runtime test
-	- openocd: runtime test
-	- hyperfine: runtime test
-	- python-urllib3: runtime test
-	- test_edk2: add macchiatobin build test
-	- bat: runtime test
-	- dust: runtime test
-
-	Infrastructure updates / fixes:
-
-	- libopenh264: ignore CVE-2025-27091
-	- edk2: drop dependency on tf-a for macchiatobin
-	- vim: extend comment about vi symlink
-	- board/raspberrypi/readme.txt: various improvements
-	- raspberrypi5: install Raspberry Pi 500 device-tree blob
-	- gen-bootlin-toolchains: allows armv8-a CPU to use armv7-a toolchains
-	- libsigrokdecode: needs python3 w/ zlib support
-	- dejavu: update homepage
-	- pulseview: fix, update, and reorganise dependencies
-	- boost: move host variables closer together
-	- boost: move target library selection variables closer together
-	- support/download/git: use FOO_DL_OPTS
-	- stm32mp135f_dk: fix optee hash
-	- libcamera: various fixes
-	- apparmor don't reference libapparmor variables
-	- rpi-firmware: add note to keep in sync with kernel
-	- python-sdbus: fix upstream url
-	- qt5webengine: drop unused file
-	- warp7: Improve Wifi instructions
-	- cryptopp: add upstream URL in help text
-	- dpdk: fixup Config.in comment about dependencies
-	- ffmpeg: add support for libopenmpt
-	- pkg-stats: fix typo in --disable help text
-	- imx28evk: enable BR2_DOWNLOAD_FORCE_CHECK_HASHES
-	- friendlyarm_nanopi_r3s: fix host linux headers custom version
-	- support/dependencies/dependencies.sh: awk is needed by Buildroot
-	- Config.in: introduce BR2_HOST_GCC_AT_LEAST_{12..15}
-	- dbus: set session-socket-dir to /tmp
-	- fs/erofs: unbreak custom compression handling
-	- nodejs: make target nodejs package virtual
-	- mpd: update CPE/CVE information
-	- Various fix for GCC15 host
-
-	Build issues and other problems solved for packages:
-
-	sqlite, pahole, libv4l, arm-trusted-firmware, libopenmpt, iptables,
-	tailscale, wilc-driver, rtl8188eu, rtl8723ds, lmbench, fluent-bit,
-	mosquitto, iproutes2, pixman, linux-tools, libcoap, libcamera,
-	strongswan, mpv, hiredis, zfs, bird, netsnmp, libcap, musepack,
-	ffmpeg, libqrencode
-
-2025.02.1, released April 22nd, 2025
-
-	Changes with potentially large impact:
-
-	- gstreamer1 and related packages: updated from 1.22.x to 1.24.x.
-	  1.22.x was already EOL when Buildroot 2025.02 was released, so
-	  GStreamer should really already have been udpated to 1.24.x.
-	  This update was needed to fix a lot of vulnerabilities.
-	- frr: updated from 9.1.3 to 10.3. Version 9 is no longer
-	  maintained upstream, and not in any distro either. This update
-	  was needed to fix a vulernability.
-
-	Important / security related fixes:
-
-	- libmodsecurity: CVE-2025-27110.
-	- tinyxml2: CVE-2024-50615.
-	- xserver_xorg-server & xwayland: CVE-2024-9632, CVE-2025-26594,
-	    CVE-2025-26595, CVE-2025-26596, CVE-2025-26597,  CVE-2025-26598,
-	    CVE-2025-26599, CVE-2025-26600, CVE-2025-26601.
-	- exim: CVE-2025-30232.
-	- mbedtls: CVE-2025-27809, CVE-2025-27810.
-	- libfreeglut: CVE-2024-24258, CVE-2024-24259.
-	- libopenh264: CVE-2025-27091.
-	- gstreamer1: CVE-2024-47834, CVE-2024-47835, CVE-2024-47778,
-	    CVE-2024-47777 CVE-2024-47776, CVE-2024-47775, CVE-2024-47774,
-	    CVE-2024-47615, CVE-2024-47613, CVE-2024-47607, CVE-2024-47606,
-	    CVE-2024-47603, CVE-2024-47602, CVE-2024-47601, CVE-2024-47600,
-	    CVE-2024-47599, CVE-2024-47598, CVE-2024-47597, CVE-2024-47596,
-	    CVE-2024-47546, CVE-2024-47545, CVE-2024-47544, CVE-2024-47543,
-	    CVE-2024-47542, CVE-2024-47541, CVE-2024-47540, CVE-2024-47539,
-	    CVE-2024-47538, CVE-2024-47537.
-	- augeas: CVE-2025-2588.
-	- libndp: CVE-2024-5564.
-	- python-jinja2: CVE-2025-27516.
-	- python-django: CVE-2025-26699.
-	- libarchive: CVE-2024-57970, CVE-2025-1632.
-	- frr: CVE-2024-55553.
-
-	Updated / fixed packages: libmodsecurity, intel-mediadriver,
-	intel-vpl-gpu-rt, python-aerich, python-aiohttp, python-maturin,
-	python-tortoise-orm, python-sqlalchemy, kodi-pvr-waipu, tor, mc,
-	tinyxml2, libgeos, intel-vpl-gpu-rt, intel-mediadriver, ruby,
-	ncftp, xserver_xorg-server, exim, mbedtls, gdb, freerdp, uclibc,
-	libsoup3, cairo, zabbix, armadillo, spdlog, go, linux, linux-tools,
-	gstreamer, linux-header, ethtool, apr, mali-driver, libcoap, libcap
-	python-fastapi, python-twisted.
-
-	Test Improvements:
-
-	- linux-tools: selftests: Add path containing BPF binary.
-	- testing: make time setting portable.
-	- testing: set date in emulated machine.
-	- testing: add git runtime test.
-	- test_gstreamer1: fix test by using bootlin toolchain.
-
-	Infrastructure updates/fixes:
-
-	- kconfig: Handle backspace (^H) key.
-	- xilinx-embeddedsw: fix menuconfig visualization.
-	- DEVELOPERS: change arnout's address.
-	- support/download/svn: use 'svn info' whith LC_ALL=C
-	- glibc: disable on RISC-V ilp32f and lp64f, not supported.
-	- dillo: Fix an issue related to _SITE url for make show-info.
-	- pkg-stats: add -v/--verbose option
-
-	Build issues/problems solved for packages:
-
-	dillo, freerdp, freeswitch, gdb, glibc, linux-tools,
-	mesa3d-demos, ncftp, tesseract-ocr,
-	v4l2loopback, zabbix
-
-2025.02, released March 17th, 2025
-
-	Various fixes.
-
-	Updated/fixed packages: expat, fio, libopenssl, php, rauc,
-	rt-tests
-
-2025.02-rc2, released March 13th 28th, 2025
-
-	Fixes all over the tree.
-
-        Linux: Support device tree overlays and support custom device
-        tree files with Linux >= 6.12, which changed the build
-        logic. For this a new BR2_LINUX_KERNEL_CUSTOM_DTS_DIR option
-        has been introduced and the existing _CUSTOM_DTS_PATH option
-        deprecated.
-
-	Updated/fixed packages: compiler-rt, elfutils, fluidsynth,
-	freescale-imx, go, jbig2dec, libcamera, libcdio, libjxl, musl,
-	optee-os, postgresql, prboom, sqlite, systemd, util-linux,
-	webkitgtk
-
-2025.02-rc1, released February 28th, 2025
-
-	Fixes all over the tree and new features.
-
-        Nios2 architecture support removed.
-
-	Toolchain:
-
-        - binutils 2.44 added, binutils 2.43.1 becomes the default.
-
-        - gdb 16.1 added, gdb 15.1 becomes the default.
-
-        - glibc 2.41, uclibc-ng 1.0.51
-
-        - Synopsys external ARC toolchains marked as broken as they
-          are not "bare" toolchains, causing various build issues
-
-        - ARM external toolchains bumped to 12.4.rel1 and are now also
-          available for Aarch64 build machines
-
-        Infrastructure:
-
-        - utils/generate-cyclonedx script added to generate SBOM in
-          CycloneDX format. To use it, run
-
-            make show-info | utils/generate-cyclonedx > sbom.json
-
-        new defconfigs: FriendlyARM NanoPi R3S, NXP imx8mm-evk /
-        imx8mm-ddr4 /imx8mp-evk / imx93-evk / ls1043a-rdb /
-        ls1046a-rdb, Orangepi 5 plus, Polyhex Debix model A,
-        Raspberrypi zero 2w 64bit, Raxda rock 4SE, STM STM32MP135F-DK
-
-	New packages: bmap-writer, cpuinfo, cross-ldd, farmhash,
-	fft2d, fp16, gemmlowp, libecoli, libglib2-bootstrap, lynis,
-	nxp-bt-wifi-firmware, nxp-mwifiex, panel-mipi-dbi-firmware,
-	parsec, psimd, pthreadpool, python-aiohttp-sse-client,
-	python-asyncclick, python-changelog-chug, python-telnetlib3,
-	python-waitress, qt6graphs, qt6multimedia, qt6quick3d,
-	rnnoise, ruy, snooze, tensorflow-lite, usbip, utfcpp,
-	wlr-randr, xilinx-embeddedsw, xnnpack
-
-        Removed packages: angularjs, angular-websocket, directfb,
-        directfb-examples, fconfig, genromfs, giblib, gst-omx,
-        hiwatha, latencytop, libhid, linux-fusion, lite, mimic,
-        mongodb, obsidian-cursors, python-m2crypto, quagga, ramsmp,
-        w_scan
-
-	Issues resolved:
-	- bluetooth.service cannot connect to D-BUS
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/65
-        - gdb package doesn't have a licence hash in the gdb.hash file
-          https://gitlab.com/buildroot.org/buildroot/-/issues/66
-	- package/libsha1: Build failure with GCC 14 [-Wimplicit-int]
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/69
-	- samba4 build failed in master
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/86
-
-2024.11.4, released April 22nd, 2025
-
-	Important / security related fixes:
-
-	- xserver_xorg-server & xwayland: CVE-2024-9632, CVE-2025-26594,
-	    CVE-2025-26595, CVE-2025-26596, CVE-2025-26597,  CVE-2025-26598
-	    CVE-2025-26599, CVE-2025-26600, CVE-2025-26601.
-	- exim: CVE-2025-30232.
-	- mbedtls: CVE-2025-27809, CVE-2025-27810.
-	- augeas: CVE-2025-2588.
-	- libarchive: CVE-2024-57970, CVE-2025-1632, CVE-2025-25724.
-	- xwayland: CVE-2024-31081, CVE-2024-31083, CVE-2024-9632,
-	    CVE-2025-26594, CVE-2025-26595, CVE-2025-26596,
-	    CVE-2025-26597, CVE-2025-26598, CVE-2025-26599,
-	    CVE-2025-26600, CVE-2025-26601
-	- libopenh264: CVE-2025-27091.
-	- libmodsecurity: CVE-2025-27110.
-	- tinyxml2: CVE-2024-50615.
-
-	Updated/fixed packages:
-
-	libgeos, freerdp, libsoup3, cairo, linux, apr, mali-driver,
-	libcoap, python-fastapi, python-twisted, tor, mc, linux-header,
-	linux-tools.
-
-	Test Improvements:
-
-	- linux-tools: selftests: Add path containing BPF binary.
-	- testing: add git runtime test.
-
-	Infrastructure updates/fixes:
-
-	- DEVELOPERS: change arnout's address.
-	- DEVELOPERS: add Dario Binacchi for ti-k3-boot-firmware.
-	- support/download/svn: use 'svn info' whith LC_ALL=C**.
-	- dillo: Fix an issue related to _SITE url for make show-info.
-	- kconfig: Handle backspace (^H) key.
-	- pkg-stats: add -v/--verbose option
-
-	Build issues/problems solved for:
-
-	freeswitch, glibc, v4l2loopback, ls1028ardb, ls1028ardb,
-	mesa3d-demos.
-
-2024.11.3, released March 24st, 2025
-
-	Important / security related fixes.
-
-	Defconfigs: Octavo osd23mp1: Fix TF-A/Linux compilation after
-	move to newer toolchain versions.
-
-	Updated/fixed packages: compiler-rt, exim, expat, fio, foot,
-	go, jbig2dec, libcamera, libjxl, libopenssl, libxml2, mokutil,
-	musl, optee-os, php, pkgconf, postgresql, prboom,
-	python-typing-extensions, rauc, systemd, util-linux,
-	watchdogd, webkitgtk
-
-2024.11.2, released February 21st, 2025
-
-	Important / security related fixes.
-
-	Infrastructure: support/script/genimage.sh: exit on errors
-
-	Defconfigs: ti_am62ax_sk: Include PMIC driver to fix boot
-	issue
-
-	Updated/fixed packages: acpica, apache, assimp, asterisk,
-	bind, busybox, clamav, curlpp, dillo, elfutils, fakeroot,
-	ffmpeg, freetype, git, glibc, gnu-efi, gnutls, go, gpsd,
-	heimdal, imagemagick, intel-microcode, kodi, libbsd, libcurl,
-	libopenssl, libtasn1, libxml2, mdnsd, mpg123, musl, nettle,
-	nginx, nodejs, openjpeg, openssh, openvpn, php, pipewire,
-	postgresql, python-django, python3, redis, rsync, socat,
-	swipl, syslinux, tor, tzdata, uclibc, uemacs, unbound,
-	usbutils, util-linux, webkitgtk, xen, zic, zlog, zstd,
-	zxing-cpp
-
-	Issues resolved:
-	- samba4 build failed in master
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/86
-
-2024.11.1, released January 9th, 2025
-
-	Important / security related fixes.
-
-        Infrastructure:
-
-        - Ensure CONFIG_TRIM_UNUSED_KSYMS is disabled when building
-          external Linux kernel modules
-
-	Updated/fixed packages: apr, bc, bluez5_utils, c-icap,
-	cryptodev-linux, dahdi-linux, dpdk, freeipmi, gdb, gnupg2,
-	gnuplot, gnutls, go, gobject-introspection, grub2, gst-omx,
-	gst1-devtools, gst1-libav, gst1-plugins-bad,
-	gst1-plugins-base, gst1-plugins-good, gst1-plugins-ugly,
-	gst1-python, gst1-rtsp-server, gst1-vaapi, gstreamer1,
-	gstreamer1-editing-services, igt-gpu-tools, iperf3, libcurl,
-	libsha1, libsndfile, libsoup3, libvirt, libxcrypt, libxml2,
-	libzenoh-pico, linux, linux-pam, netatalk, nettle, octave,
-	opensc, perl, php, pixman, polkit, procps-ng,
-	python-autocommand, python-django, python3, quickjs, samba4,
-	skeleton, subversion, ti-k3-r5-loader, tzdata, v4l2loopback,
-	wayland, webkitgtk, weston, wget, wireshark, wpewebkit,
-	xr819-xradio, xxhash, zfs, zic
-
-	Issues resolved:
-	- bluetooth.service cannot connect to D-BUS
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/65
-        - gdb package doesn't have a licence hash in the gdb.hash file
-          https://gitlab.com/buildroot.org/buildroot/-/issues/66
-	- package/libsha1: Build failure with GCC 14 [-Wimplicit-int]
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/69
-
-2024.11, released December 8th, 2024
-
-	Various fixes.
-
-	Updated/fixed packages: eza, foot, gnutls, ibm-sw-tpm2,
-	mosquitto, pixman
-
-	Issues resolved:
-        - procps-ng: builderror in 2024.08
-          https://gitlab.com/buildroot.org/buildroot/-/issues/38
-
-2024.11-rc3, released Decemmber 5th, 2024
-
-	Fixes all over the tree.
-
-	Updated/fixed packages: alsa-lib, android-tools, bats-core,
-	doxygen, frr, gnutls, libvpl, linux-tools, lmbench, lrzsz,
-	musl, nfs-utils, opkg, polkit, postgresql, procps-ng,
-	python-psycopg2, quagga, rt-tests, rust, sexpect
-
-2024.11-rc2, released November 23rd, 2024
-
-	Fixes all over the tree.
-
-	Updated/fixed packages: bmap-tools, go, intel-microcode,
-	libblockdev, libcurl, libkrb5, libnvme, libpng, php,
-	postgresql, python-sip, skopeo, tiff, util-linux-libs
-
-2024.11-rc1, released November 13th, 2024
-
-	Fixes all over the tree and package updates.
-
-	Toolchain:
-
-	- binutils 2.43 added, binutils 2.42 becomes the default.
-	- glibc updated to 2.40
-	- ARM, Bootlin and Synopsys external toolchains updated
-	- Support added for ARM FDPIC, which allows to use shared
-	  libraries on ARM noMMU targets
-
-	Go support: allow using a pre-built Go compiler, using the new
-	go-bin package.
-
-	New defconfigs: friendlyarm_nanopi_neo, nvidia_bf3,
-	stm32f746_disco_sd, ti_am62px_sk, versal_vek280
-
-	Removed defconfigs: qemu_nios2_10m50
-
-	New packages: andes-spi-burn, bfscripts, cpp-httplib, dlib,
-	dpdk, evilwm, go-bin, iana-assignments, iotools, lua-uuid,
-	oath-toolkit, perl-mime-base32, python-aiohappyeyeballs,
-	python-aiomqtt, python-argcomplete, python-dotenv,
-	python-dunamai, python-immutabledict, python-iterable-io,
-	python-path, python-poetry-dynamic-versioning,
-	python-propcache, python-proto-plus, python-psygnal,
-	python-pyaml, python-pydantic-settings, python-pyqt5-sip,
-	python-pysnmpcrypto, python-rgbmatrix, python-sdbus,
-	python-sdbus-networkmanager, python-simple-websocket,
-	python-tinyhtml5, python-zipstream-ng, qt6charts, qt6scxml,
-	superiotool, tailscale, tinyinit, uefisettings
-
-	Removed packages: bsdiff, popperjs
-
-	Added tests: erofs filesystem, audit, dosfstools, dtc,
-	exfatprogs, go-bin, iputils, oath-toolkit, parted, pppd, pv,
-	pyqt5, python-sdbus, python-sdbus-networkmanager, rrdtool,
-	unbound, which
-
-	Issues resolved:
-	- host rpath fixups misses needed directory
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/39
-	- procps-ng: build failure when linking to systemd
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/28
-	- ripgrep leaves /usr/crates2.json / .crates.toml files
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/17
-
-2024.08.3, released December 8th, 2024
-
-	Important / security related fixes.
-
-	Defconfigs: fix mender_x86_64_efi_defconfig build on setups
-	where /bin/sh is not bash.
-
-	Updated/fixed packages: alsa-lib, android-tools, bats-core,
-	bluez-alsa, bmap-tools, boost, checksec, ebtables, expat, fbv,
-	ffmpeg, foot, frr, gnuplot, gnutls, intel-microcode, irssi,
-	libcurl, libgit2, libkrb5, libmodbus, libpng, libvpl,
-	linux-pam, linux-tools, lmbench, mbedtls, mosquitto, musl,
-	musl-compat-headers, nfs-utils, ntp, php, picotool,
-	postgresql, procps-ng, python-psycopg2, python-sip, qt6base,
-	quagga, rt-tests, sexpect, sshguard, systemd, tiff, x11vnc
-
-	Issues resolved:
-	- procps-ng: builderror in 2024.08
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/38
-	- fbv package download link is broken in long term support branch
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/73
-
-2024.08.2, released November 14th, 2024
-
-	Important / security related fixes.
-
-	Updated/fixed packages: apache, asterisk, bind, cmake, criu,
-	file, fluidsynth, ghostscript, heimdal, intel-microcode,
-	iproute2, jailhouse, jsoncpp, libarchive, libcurl, libldns,
-	libgit2, liblinear, libmdbx, libopenh264, libpng,
-	libtraceevent, libxml2, ltrace, nethogs, nghttp2, ntp,
-	openjdk, php, postgresql,procps-ng, python-pyqt5, python3,
-	qemu, ruby, sqlite, sysvinit, tor, trace-cmd, wpebackend-fdo
-
-	New packages: python-pyqt5-sip
-
 2024.08.1, released October 20th, 2024
 
 	Important / security related fixes.
@@ -711,44 +168,6 @@
 	- Can't subscribe buildroot mailing list
 	  https://gitlab.com/buildroot.org/buildroot/-/issues/25
 
-2024.05.3, released September 9th, 2024
-
-	Important / security related fixes.
-
-        A large number of GCC 14.x compilation fixes and additional
-        runtime tests.
-
-        Infrastructure:
-        - Be more robust against text files (for package hashes and
-          users) incorrectly missing a terminating newline.
-
-        - Fix various issues with the pkg-kconfig infrastructure and
-          per-package-directories builds
-          (BR2_PER_PACKAGE_DIRECTORIES).
-
-	Updated/fixed packages: aer-inject, am335x-pru-package,
-	apache, apr, apr-util, attr, augeas, autossh, bandwidthd,
-	bcusdk, boost, brcm-patchram-plus, btrfs-progs, busybox,
-	can-utils, coreutils, cpuload, cryptsetup, cwiid, dhrystone,
-	dvb-apps, elfutils, faifa, fetchmail, ffmpeg, fluent-bit,
-	fluidsynth, freerdp, gcc, gcc-bare-metal, gdb, gnutls, gpsd,
-	hiawatha, hostapd, htop, ibm-sw-tpm2, intel-microcode, iperf3,
-	iproute2, ksmbd-tools, libcli, libcoap, libcurl, libest,
-	libfreefare, libgtk3, libngs, libpwquality, libressl, libupnp,
-	libxml2, libxslt, lrzsz, mdio-tools, micropython,
-	mjpg-streamer, mokutil, mpir, ncftp, nginx, nodejs, odb,
-	open-iscsi, openldap, openswan, openvpn, pistache, procps-ng,
-	python-django, quotatool, rtty, ruby, sconeserver, speex,
-	swaybg, tar, tftpd, tinyssh, uclibc, uclibc-ng-test, unbound,
-	uuu, vorbus-tools, wpewebkit, zfs, zsh
-
-        Issues resolved:
-	- TAR-1.35 will not build for target (host-variant will build)
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/4
-	- Toolchain (host-gcc-final-14.1.0) build failure with
-	  y2038/BR2_TIME_BITS_64 enabled
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/16
-
 2024.05.2, released August 14th, 2024
 
 	Important / security related fixes.
@@ -919,210 +338,6 @@
         #16036: android-tools version is too old
         #16075: Cannot use linux kernel extensions from external tree..
 
-2024.02.13, released April 22nd, 2025
-
-	Important / security related fixes:
-
-	- xserver_xorg-server & xwayland: CVE-2024-9632, CVE-2025-26594,
-	    CVE-2025-26595, CVE-2025-26596, CVE-2025-26597,  CVE-2025-26598,
-	    CVE-2025-26599, CVE-2025-26600, CVE-2025-26601.
-	- exim: CVE-2025-30232.
-	- mbedtls: CVE-2025-27809, CVE-2025-27810.
-	- augeas: CVE-2025-2588.
-	- libarchive: CVE-2024-57970, CVE-2025-1632, CVE-2025-25724.
-	- libopenh264: CVE-2025-27091.
-	- libmodsecurity: CVE-2025-27110.
-	- tinyxml2: CVE-2024-50615.
-	- libndp: CVE-2024-5564.
-	- xwayland: CVE-2024-31080, CVE-2024-31081, CVE-2024-31083,
-	    CVE-2024-9632, CVE-2025-26594, CVE-2025-26595,
-	    CVE-2025-26596, CVE-2025-26597, CVE-2025-26598,
-	    CVE-2025-26599, CVE-2025-26600, CVE-2025-26601.
-	- libfreeglut: CVE-2024-24258, CVE-2024-24259.
-
-	Updated/fixed packages:
-
-	libsoup3, linux, apr, mali-driver,
-	libcoap, python-fastapi, python-twisted, tor, linux-header,
-	linux-tools, libmodsecurity
-
-	Test Improvements:
-
-	- linux-tools: selftests: Add path containing BPF binary.
-	- testing: add git runtime test.
-
-	Infrastructure updates/fixes:
-
-	- DEVELOPERS: change arnout's address.
-	- DEVELOPERS: add Dario Binacchi for ti-k3-boot-firmware.
-	- support/download/svn: use 'svn info' whith LC_ALL=C.
-	- dillo: Fix an issue related to _SITE url for make show-info.
-	- kconfig: Handle backspace (^H) key.
-	- pkg-stats: add -v/--verbose option
-
-	Build issues/problems solved for:
-	glibc, mesa3d-demos.
-
-2024.02.12, released March 24st, 2025
-
-	Important / security related fixes.
-
-	Defconfigs: Octavo osd23mp1: Fix TF-A/Linux compilation after
-	move to newer toolchain versions.
-
-	Updated/fixed packages: compiler-rt, exim, expat, fio, foot,
-	jbig2dec, libjxl, libxml2, musl, optee-os, php, postgresql,
-	prboom, python-typing-extensions, systemd, util-linux,
-	watchdogd, webkitgtk
-
-2024.02.11, released February 21st, 2025
-
-	Important / security related fixes.
-
-	Updated/fixed packages: acpica, apache, assimp, asterisk,
-	bind, busybox, clamav, curlpp, dillo, elfutils, ffmpeg, foot,
-	freetype, git, gnutls, go, gpsd, heimdal, imagemagick,
-	intel-microcode, libbsd, libcurl, libopenssl, libtasn1, mdnsd,
-	mpg123, musl, nginx, nodejs, openjpeg, openssh, openvpn,
-	postgresql, python-django, redis, rsync, sdbus-cpp, socat,
-	tor, tzdata, uemacs, unbound, usbutils, webkitgtk, xen, zic,
-	zlog, zmqpp, zstd
-
-	Issues resolved:
-        - OpenSSH 9.8 broken
-          https://gitlab.com/buildroot.org/buildroot/-/issues/11
-        - samba4 build failed in master
-          https://gitlab.com/buildroot.org/buildroot/-/issues/86
-
-2024.02.10, released January 9th, 2025
-
-	Important / security related fixes.
-
-        Infrastructure:
-
-        - Ensure CONFIG_TRIM_UNUSED_KSYMS is disabled when building
-          external Linux kernel modules
-
-	Updated/fixed packages: apr, bc, cdrkit, cryptodev-linux,
-	freeipmi, gdb, gnupg2, gnutls, go, gobject-introspection,
-	grub2, gst-omx, gst1-devtools, gst1-libav, gst1-plugins-bad,
-	gst1-plugins-base, gst1-plugins-good, gst1-plugins-ugly,
-	gst1-python, gst1-rtsp-server, gst1-vaapi, gstreamer1,
-	gstreamer1-editing-services, iperf3, libcurl, libsha1,
-	libsndfile, libsoup3, libvirt, libxcrypt, linux, linux-pam,
-	mosquitto, netatalk, nettle, octave, opensc, perl, pixman,
-	procps-ng, python-django, python3, qt6base, samba4, skeleton,
-	subversion, tzdata, v4l2loopback, webkitgtk, wget, wireshark,
-	wpewebkit, zic
-
-	Issues resolved:
-        - gdb package doesn't have a licence hash in the gdb.hash file
-          https://gitlab.com/buildroot.org/buildroot/-/issues/66
-	- package/libsha1: Build failure with GCC 14 [-Wimplicit-int]
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/69
-	- [2024.02.9] Mosquitto doesn't build
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/78
-
-2024.02.9, released December 8th, 2024
-
-	Important / security related fixes.
-
-	Updated/fixed packages: alsa-lib, android-tools, babeld,
-	bmap-tools, boost, ebtables, expat, fbv, foot, frr, gamin,
-	gnutls, intel-microcode, irssi, libcurl, libkrb5, libmodbus,
-	libvpl, linux-tools, lmbench, mbedtls, mosquitto, musl,
-	musl-compat-headers, nfs-utils, ntp, php, postgresql,
-	procps-ng, python-psycopg2, python-sip, qt6base, quagga,
-	rt-tests, sshguard, systemd, tiff, x11vnc
-
-	Issues resolved:
-	- procps-ng: builderror in 2024.08
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/38
-	- fbv package download link is broken in long term support branch
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/73
-
-2024.02.8, released November 14th, 2024
-
-	Important / security related fixes.
-
-	Updated/fixed packages: apache, asterisk, bind, bootgen, criu,
-	file, fluidsynth, ghostscript, heimdal, intel-microcode,
-	jailhouse, jsoncpp, libarchive, libcurl, libldns, liblinear,
-	libmdbx, libopenh264, ltrace, lightning, nghttp2, ntp, php,
-	postgresql, procps-ng, python-pyqt5, ruby, sysvinit, tor,
-	wpebackend-fdo
-
-	New packages: python-pyqt5-sip
-
-2024.02.7, released October 21th, 2024
-
-	Important / security related fixes.
-
-	Per-package-directories fixes for the .gdbinit file and RPATH
-	fixups for SDK.
-
-	utils/check-package: Also check for correct indentation of
-	help lines.
-
-	A large number of typo fixes.
-
-	Updated/fixed packages: aer-inject, armadillo, asterisk,
-	aumix, babeld, bind, botan, cache-calibrator, clamav,
-	comix-cursors, cryptsetup, cups, dovecot, dovecot-pigeonhole,
-	expat, fbset, genpart, glibc, gnu-efi, gnutls, go, grub2,
-	libarchive, libcuefile, libcurl, libglob, libgpg-error,
-	libilbc, libkcapi, libopenssl, libpcap, libuecc, linux-pam,
-	mosquitto, nginx, ntpsec, p910nd, php, postgresql, procps-ng,
-	proftpd, pure-ftpd, python-django, python-huepy,
-	python-sqlparse, python-unittest-xml-reporting, python3,
-	qt6base, qt6svg, rp-pppoe, sofia-sip, strongswan, szip,
-	tllist, unbound, wpebackend-fdo, wpewebkit, x264, xenomai,
-	xserver_xorg-server, zabbix
-
-	New packages: go-bootstrap-stage3
-
-	Issues resolved:
-	- procps-ng: build failure when linking to systemd
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/28
-	- orange pi 2w does not boot
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/36
-	- glibc configure fails on aarch64 with mathvec SVE ACLE error
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/40
-	- Kernel Build from Custom Git Repo fails with hash-error
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/46
-	- package/linux-pam: Remove unneeded flex dependency
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/47
-
-2024.02.6, released September 9th, 2024
-
-	Important / security related fixes.
-
-        Added a large number of additional runtime tests.
-
-        Infrastructure:
-        - Be more robust against text files (for package hashes and
-          users) incorrectly missing a terminating newline.
-
-        - Fix various issues with the pkg-kconfig infrastructure and
-          per-package-directories builds
-          (BR2_PER_PACKAGE_DIRECTORIES).
-
-	Updated/fixed packages: aer-inject, am335x-pru-package,
-	apache, apr, apr-util, attr, boost, btrfs-progs, busybox,
-	cryptsetup, dropbear, elfutils, fetchmail, ffmpeg, fluidsynth,
-	freerdp, gcc, gdb, gnutls, gpsd, hiawatha, hostapd, htop,
-	intel-microcode, iperf3, ksmbd-tools, libcoap, libcurl,
-	libest, libgtk3, libpwquality, libressl, libupnp, libxml2,
-	libxslt, lrzsz, mdio-tools, micropython, mjpg-streamer, mpir,
-	ncftp, nginx, nodejs, open-iscsi, openldap, openvpn, pistache,
-	procps-ng, python-django, ruby, speex, swaybg, tinyssh,
-	uclibc, uclibc-ng-test, unbound, uuu, wpewebkit, zfs
-
-        Issues resolved:
-	- Toolchain (host-gcc-final-14.1.0) build failure with
-	  y2038/BR2_TIME_BITS_64 enabled
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/16
-
 2024.02.5, released August 14th, 2024
 
 	Important / security related fixes.

Config.in

@@ -6,15 +6,6 @@ config BR2_HAVE_DOT_CONFIG
 	bool
 	default y
 
-# Hidden symbol kept to false, to temporarily mark a configuration
-# known to be broken (by depending on it). Ideally, we don't want to
-# keep broken parts for too long. The intended use of this symbol is
-# to give some time to a developer to fix the feature. Features marked
-# as broken will be removed if they are not fixed in a reasonable
-# amount of time.
-config BR2_BROKEN
-	bool
-
 config BR2_VERSION
 	string
 	option env="BR2_VERSION_FULL"
@@ -74,26 +65,6 @@ config BR2_HOST_GCC_AT_LEAST_11
 	default y if BR2_HOST_GCC_VERSION = "11"
 	select BR2_HOST_GCC_AT_LEAST_10
 
-config BR2_HOST_GCC_AT_LEAST_12
-	bool
-	default y if BR2_HOST_GCC_VERSION = "12"
-	select BR2_HOST_GCC_AT_LEAST_11
-
-config BR2_HOST_GCC_AT_LEAST_13
-	bool
-	default y if BR2_HOST_GCC_VERSION = "13"
-	select BR2_HOST_GCC_AT_LEAST_12
-
-config BR2_HOST_GCC_AT_LEAST_14
-	bool
-	default y if BR2_HOST_GCC_VERSION = "14"
-	select BR2_HOST_GCC_AT_LEAST_13
-
-config BR2_HOST_GCC_AT_LEAST_15
-	bool
-	default y if BR2_HOST_GCC_VERSION = "15"
-	select BR2_HOST_GCC_AT_LEAST_14
-
 # When adding new entries above, be sure to update
 # the HOSTCC_MAX_VERSION variable in the Makefile.
 
@@ -134,15 +105,15 @@ menu "Commands"
 
 config BR2_CURL
 	string "Curl command"
-	default "curl -q --ftp-pasv --retry 3 --connect-timeout 10"
+	default "curl -q --ftp-pasv --retry 3"
 
 config BR2_WGET
 	string "Wget command"
-	default "wget -nd -t 3 --connect-timeout=10"
+	default "wget -nd -t 3"
 
 config BR2_SVN
 	string "Subversion (svn) command"
-	default "svn --non-interactive --config-option servers:global:http-timeout=10"
+	default "svn --non-interactive"
 
 config BR2_BZR
 	string "Bazaar (bzr) command"
@@ -162,11 +133,11 @@ config BR2_LOCALFILES
 
 config BR2_SCP
 	string "Secure copy (scp) command"
-	default "scp -o ConnectTimeout=10"
+	default "scp"
 
 config BR2_SFTP
 	string "Secure file transfer (sftp) command"
-	default "sftp -o ConnectTimeout=10"
+	default "sftp"
 
 config BR2_HG
 	string "Mercurial (hg) command"
@@ -314,7 +285,7 @@ config BR2_KERNEL_MIRROR
 
 config BR2_GNU_MIRROR
 	string "GNU Software mirror"
-	default "https://ftpmirror.gnu.org"
+	default "http://ftpmirror.gnu.org"
 	help
 	  GNU has multiple software mirrors scattered around the
 	  world. The following allows you to select your preferred
@@ -828,6 +799,8 @@ config BR2_PIC_PIE_ARCH_SUPPORTS
 	default y
 	# Microblaze glibc toolchains don't work with PIC/PIE enabled
 	depends on !BR2_microblaze
+	# Nios2 toolchains produce non working binaries with -fPIC
+	depends on !BR2_nios2
 
 config BR2_PIC_PIE
 	bool "Build code with PIC/PIE"
@@ -990,7 +963,7 @@ config BR2_FORTIFY_SOURCE_2
 	# gcc bug https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61164
 	depends on !BR2_TOOLCHAIN_BUILDROOT || BR2_TOOLCHAIN_GCC_AT_LEAST_6
 	help
-	  This option sets _FORTIFY_SOURCE to 2 and some more
+	  This option sets _FORTIFY_SOURCES to 2 and some more
 	  checking is added, but some conforming programs might fail.
 	  Also adds checks at run-time (detected buffer overflow
 	  terminates the program)
@@ -999,7 +972,7 @@ config BR2_FORTIFY_SOURCE_3
 	bool "Extended"
 	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_12
 	help
-	  This option sets _FORTIFY_SOURCE to 3 and even more
+	  This option sets _FORTIFY_SOURCES to 3 and even more
 	  checking is added compared to level 2. Extends checks at
 	  run-time that can introduce an additional performance
 	  overhead.

Config.in.legacy

@@ -144,366 +144,6 @@ endif
 
 ###############################################################################
 
-comment "Legacy options removed in 2025.05"
-
-config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SWRAST
-	bool "mesa Gallium swrast driver was replaced by softpipe"
-	select BR2_LEGACY
-	select BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SOFTPIPE
-	help
-	  The Gallium swrast driver was replaced by softpipe.
-
-config BR2_PACKAGE_MBEDTLS_COMPRESSION
-	bool "mbedtls compression support removed"
-	select BR2_LEGACY
-	help
-	  MbedTLS has dropped support for TLS record-level
-	  compression.
-
-config BR2_KERNEL_HEADERS_6_13
-	bool "kernel headers version 6.13.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 6.13.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_PACKAGE_MPD_SOUNDCLOUD
-	bool "mpd soundcloud support has been removed"
-	select BR2_LEGACY
-	help
-	  MPD SoundCloud support has been removed.
-
-# BR2_PACKAGE_DOCKER_ENGINE_DOCKER_INIT is still referenced in docker-engine
-config BR2_PACKAGE_DOCKER_ENGINE_DOCKER_INIT
-	bool "docker-engine init support is now a choice"
-	select BR2_LEGACY
-	help
-	  docker-engine init support is now a choice. The original
-	  setting has been adapted; be sure to review it in the
-	  docker-engine package.
-
-comment "Legacy options removed in 2025.02"
-
-config BR2_PACKAGE_SQLITE_ENABLE_JSON1
-	bool "Enable the JSON extensions for SQLite has been removed"
-	select BR2_LEGACY
-	help
-	  Since SQLite 3.38 the JSON Extension is enabled by default.
-
-config BR2_PACKAGE_ANGULARJS
-	bool "angularjs has been removed"
-	select BR2_LEGACY
-	help
-	  The angularjs package was removed as the upstream
-	  project has been archived.
-
-config BR2_PACKAGE_ANGULAR_WEBSOCKET
-	bool "angular-websocket has been removed"
-	select BR2_LEGACY
-	help
-	  The angular-websocket package was removed as the upstream
-	  project has been archived.
-
-config BR2_PACKAGE_LATENCYTOP
-	bool "latencytop has been removed"
-	select BR2_LEGACY
-	help
-	  The latencytop package is no longer available for download.
-
-config BR2_PACKAGE_OBSIDIAN_CURSORS
-	bool "obsidian-cursors has been removed"
-	select BR2_LEGACY
-	help
-	  The obsidian cursors package is no longer available for
-	  direct download.
-
-config BR2_PACKAGE_W_SCAN
-	bool "w_scan has been removed"
-	select BR2_LEGACY
-	help
-	  The w_scan package was removed as it is not maintained
-	  anymore and the upstream URL is gone.
-
-config BR2_PACKAGE_GENROMFS
-	bool "genromfs"
-	select BR2_LEGACY
-	help
-	  Romfs root filesystem support has been removed.
-
-config BR2_TARGET_ROOTFS_ROMFS
-	bool "romfs root filesystem has been removed"
-	select BR2_LEGACY
-	help
-	  Romfs root filesystem support has been removed.
-
-config BR2_BINUTILS_VERSION_2_41_X
-	bool "binutils 2.41 has been removed"
-	select BR2_LEGACY
-	help
-	  binutils 2.41 has been removed, use a newer version.
-
-config BR2_TARGET_ROOTFS_EXT2_2r0
-	bool "ext2 rev0 support been removed"
-	select BR2_LEGACY
-	help
-	  Support for ext2 revision 0 format has been removed and
-	  revision 1 is now unconditionally used.
-
-config BR2_GDB_VERSION_13
-	bool "gdb 13.x has been removed"
-	select BR2_LEGACY
-	help
-	  GDB 13.x support has been removed, a newer version should be
-	  used instead.
-
-config BR2_nios2
-	bool "nios2 architecture removed"
-	select BR2_LEGACY
-	help
-	  The nios2 architecture was removed, by lack of toolchain
-	  support.
-
-config BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_NIOS2_GLIBC_BLEEDING_EDGE
-	bool "Bootlin nios2 glibc bleeding-edge toolchain removed"
-	select BR2_LEGACY
-	help
-	  The nios2 Bootlin toolchains have been removed.
-
-config BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_NIOS2_GLIBC_STABLE
-	bool "Bootlin nios2 glibc stable toolchain removed"
-	select BR2_LEGACY
-	help
-	  The nios2 Bootlin toolchains have been removed.
-
-config BR2_PACKAGE_DIRECTFB
-	bool "directfb has been removed"
-	select BR2_LEGACY
-	help
-	  This package was no longer maintained upstream, so it was
-	  dropped from Buildroot.
-
-config BR2_PACKAGE_GST_OMX
-	bool "gst-omx has been removed"
-	select BR2_LEGACY
-	help
-	  The gst-omx module has been removed from Gstreamer in
-	  release 1.24 in favor of Video4Linux-based video encoders.
-
-config BR2_PACKAGE_MIMIC
-	bool "mimic has been removed"
-	select BR2_LEGACY
-	help
-	  The mimic package has been removed from Buildroot.
-
-config BR2_PACKAGE_SDL2_DIRECTFB
-	bool "sdl2 directfb support removed"
-	select BR2_LEGACY
-	help
-	  The directfb support from SDL2 is no longer available, as
-	  directfb is no longer packaged in Buildroot.
-
-config BR2_PACKAGE_SDL_DIRECTFB
-	bool "sdl directfb support removed"
-	select BR2_LEGACY
-	help
-	  The directfb support from SDL is no longer available, as
-	  directfb is no longer packaged in Buildroot.
-
-config BR2_PACKAGE_QT5BASE_DIRECTFB
-	bool "qt5base directfb support removed"
-	select BR2_LEGACY
-	help
-	  The directfb support from qt5base is no longer available, as
-	  directfb is no longer packaged in Buildroot.
-
-config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_DIRECTFB
-	bool "gstreamer directfb plugin removed"
-	select BR2_LEGACY
-	help
-	  The directfb plugin from GStreamer is no longer supported,
-	  as directfb is no longer packaged in Buildroot.
-
-config BR2_PACKAGE_LITE
-	bool "lite has been removed"
-	select BR2_LEGACY
-	help
-	  This package was no longer maintained upstream, so it was
-	  dropped from Buildroot.
-
-config BR2_PACKAGE_LINUX_FUSION
-	bool "linux-fusion has been removed"
-	select BR2_LEGACY
-	help
-	  This package was no longer maintained upstream, so it was
-	  dropped from Buildroot.
-
-config BR2_PACKAGE_DIRECTFB_EXAMPLES
-	bool "directfb-examples has been removed"
-	select BR2_LEGACY
-	help
-	  This package was no longer maintained upstream, so it was
-	  dropped from Buildroot.
-
-config BR2_PACKAGE_HIAWATHA
-	bool "hiwatha has been removed"
-	select BR2_LEGACY
-	help
-	  This package is no longer maintained upstream, has no bug
-	  tracker, and the latest versions cause build
-	  failures. Therefore, it has been removed.
-
-config BR2_PACKAGE_MONGODB
-	bool "mongodb has been removed"
-	select BR2_LEGACY
-	help
-	  The mongodb package has been removed as it was unmaintained.
-
-config BR2_PACKAGE_PYTHON_M2CRYPTO
-	bool "python-m2crypto has been removed"
-	select BR2_LEGACY
-	help
-	  The python-m2crypto package was removed as it is in maintained
-	  only mode and is not recommended for new projects.
-
-config BR2_KERNEL_HEADERS_4_19
-	bool "kernel headers version 4.19.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 4.19.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_KERNEL_HEADERS_6_11
-	bool "kernel headers version 6.11.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 6.11.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_PACKAGE_GIBLIB
-	bool "giblib has been removed"
-	select BR2_LEGACY
-	help
-	  The giblib package was removed as it is not maintained
-	  anymore and the upstream URL is gone.
-
-config BR2_PACKAGE_FCONFIG
-	bool "fconfig has been removed"
-	select BR2_LEGACY
-	help
-	  The fconfig package was removed as it is not maintained
-	  anymore and the upstream URL is gone.
-
-config BR2_PACKAGE_LIBHID
-	bool "libhid has been removed"
-	select BR2_LEGACY
-	help
-	  The libhid package was removed as it is not maintained
-	  anymore and the upstream URL is gone. Consider using hidapi
-	  instead.
-
-config BR2_PACKAGE_QUAGGA
-	bool "quagga has been removed"
-	select BR2_LEGACY
-	help
-	  The quagga package was removed as it is not maintained
-	  anymore and the upstream repo is gone.
-
-config BR2_PACKAGE_RAMSMP
-	bool "ramsmp has been removed"
-	select BR2_LEGACY
-	help
-	  The ramsmp package was removed as it is not maintained
-	  anymore and the upstream repo is gone.
-
-comment "Legacy options removed in 2024.11"
-
-config BR2_PACKAGE_BSDIFF
-	bool "bsdiff has been removed"
-	select BR2_LEGACY
-	help
-	  The bsdiff package was removed as it is not maintained
-	  anymore (no commit since 2014).
-
-config BR2_PACKAGE_PROCPS_NS_ORIGINAL_TOP
-	bool "BR2_PACKAGE_PROCPS_NS_ORIGINAL_TOP has been renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_PROCPS_NG_ORIGINAL_TOP
-	help
-	  The option has been renamed to
-	  BR2_PACKAGE_PROCPS_NG_ORIGINAL_TOP.
-
-config BR2_PACKAGE_QEMU_TARGET_NIOS2
-	bool "qemu nios2 support has been removed"
-	select BR2_LEGACY
-	help
-	  NIOS2 support has been removed since Qemu 9.1.0.
-
-config BR2_PACKAGE_POPPERJS
-	bool "popperjs has been removed"
-	select BR2_LEGACY
-	help
-	  The project has been renamed to floating-ui.
-
-config BR2_KERNEL_HEADERS_6_10
-	bool "kernel headers version 6.10.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 6.10.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_PACKAGE_IPMITOOL_PEN_REG_URI
-	string "IANA PEN registry moved to iana-assignment package"
-	help
-	  Installation of the IANA PEN is now handled by the
-	  iana-assignment package; to install a custom PEN,
-	  use a rootfs-overlay for example.
-
-config BR2_PACKAGE_IPMITOOL_PEN_REG_URI_WRAP
-	bool
-	default y if BR2_PACKAGE_IPMITOOL_PEN_REG_URI != ""
-	select BR2_LEGACY
-
-config BR2_PACKAGE_ERLANG_P1_YAML
-	bool "erlang-p1-yaml has been renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_ERLANG_FAST_YAML
-	help
-	  The erlang-p1-yaml package has been renamed to
-	  erlang-fast-yaml.
-
-config BR2_PACKAGE_ERLANG_P1_XMPP
-	bool "erlang-p1-xmpp has been renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_ERLANG_XMPP
-	help
-	  The erlang-p1-xmpp package has been renamed to erlang-xmpp.
-
-config BR2_PACKAGE_ERLANG_P1_XML
-	bool "erlang-p1-xml has been renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_ERLANG_FAST_XML
-	help
-	  The erlang-p1-xml package has been renamed to erlang-fast-xml.
-
-config BR2_PACKAGE_ERLANG_P1_STUN
-	bool "erlang-p1-stun has been renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_ERLANG_STUN
-	help
-	  The erlang-p1-stun package has been renamed to erlang-stun.
-
-config BR2_PACKAGE_FBV_GIF
-	bool "fbv GIF support has been removed"
-	select BR2_LEGACY
-	help
-	  Fbv GIF support has been removed, use PNG, BMP or JPEG.
-
-config BR2_BINUTILS_VERSION_2_40_X
-	bool "binutils 2.40 has been removed"
-	select BR2_LEGACY
-	help
-	  binutils 2.40 has been removed, use a newer version.
-
 comment "Legacy options removed in 2024.08"
 
 config BR2_PACKAGE_MIDORI
@@ -5978,6 +5618,7 @@ config BR2_PACKAGE_KOBS_NG
 config BR2_PACKAGE_SAWMAN
 	bool "sawman package removed"
 	select BR2_LEGACY
+	select BR2_PACKAGE_DIRECTFB_SAWMAN
 	help
 	  This option has been removed because the sawman package no
 	  longer exists: it was merged inside DirectFB itself. This
@@ -5987,6 +5628,7 @@ config BR2_PACKAGE_SAWMAN
 config BR2_PACKAGE_DIVINE
 	bool "divine package removed"
 	select BR2_LEGACY
+	select BR2_PACKAGE_DIRECTFB_DIVINE
 	help
 	  This option has been removed because the divine package no
 	  longer exists: it was merged inside DirectFB itself. This

DEVELOPERS

@@ -43,7 +43,6 @@ F:	package/flutter-pi/
 F:	package/flutter-sdk-bin/
 F:	package/ivi-homescreen/
 F:	package/libutempter/
-F:	package/mender-update-modules/
 F:	package/tllist/
 F:	support/testing/tests/package/test_flutter.py
 
@@ -73,12 +72,6 @@ N:	Adrien Gallouët <adrien@gallouet.fr>
 F:	package/bird/
 F:	package/glorytun/
 
-N:	Akhilesh Nema <nemaakhilesh@gmail.com>
-F:	board/freescale/ls1046a-rdb/
-F:	configs/ls1046a-rdb_defconfig
-F:	board/freescale/ls1043a-rdb/
-F:	configs/ls1043a-rdb_defconfig
-
 N:	Alejandro González <alejandro.gonzalez.correo@gmail.com>
 F:	package/qprint/
 F:	package/watchdog/
@@ -88,9 +81,6 @@ F:	package/libmbim/
 F:	package/libqmi/
 F:	package/modem-manager/
 
-N:	Aleksandr Makarov <aleksandr.o.makarov@gmail.com>
-F:	package/cpp-httplib/
-
 N:	Alessandro Partesotti <a.partesotti@gmail.com>
 F:	package/oatpp/
 
@@ -132,6 +122,10 @@ F:	package/openpgm/
 N:	Aleksandr Makarov <aleksandr.o.makarov@gmail.com>
 F:	package/libest/
 
+N:	Alexander Mukhin <alexander.i.mukhin@gmail.com>
+F:	package/tinyproxy/
+F:	package/zfs/
+
 N:	Alexander Sverdlin <alexander.sverdlin@gmail.com>
 F:	package/mini-snmpd/
 
@@ -180,7 +174,7 @@ F:	package/wine/
 N:	Andreas Klinger <ak@it-klinger.de>
 F:	package/ply/
 
-N:	Andreas Naumann <dev@andin.de>
+N:	Andreas Naumann <ANaumann@ultratronik.de>
 F:	package/evemu/
 F:	package/libevdev/
 F:	package/pkg-qmake.mk
@@ -245,7 +239,11 @@ F:	package/sysdig/
 
 N:	Andy Shevchenko <andy.shevchenko@gmail.com>
 F:	package/fb-test-app/
-F:	package/iotools/
+
+N:	Anisse Astier <anisse@astier.eu>
+F:	package/go/
+F:	package/nghttp2/
+F:	package/pkg-golang.mk
 
 N:	Anthony Viallard <viallard@syscom-instruments.com>
 F:	package/gnuplot/
@@ -272,10 +270,7 @@ F:	configs/snps_archs38_hsdk_defconfig
 N:	Arnaud Aujon <arnaud@intelibre.fr>
 F:	package/espeak/
 
-N:	Arno Messiaen <arnomessiaen@gmail.com>
-F:	package/python-aiohttp-sse-client/
-
-N:	Arnout Vandecappelle <arnout@rnout.be>
+N:	Arnout Vandecappelle <arnout@mind.be>
 F:	package/arp-scan/
 F:	package/dehydrated/
 F:	package/dracut/
@@ -288,6 +283,18 @@ F:	package/python-bottle/
 F:	package/sqlcipher/
 F:	package/stress/
 
+N:	Asaf Kahlon <asafka7@gmail.com>
+F:	package/collectd/
+F:	package/libfuse3/
+F:	package/libuv/
+F:	package/python*
+F:	package/snmpclitools/
+F:	package/spdlog/
+F:	package/uftp/
+F:	package/uftrace/
+F:	package/uvw/
+F:	package/zeromq/
+
 N:	Ash Charles <ashcharles@gmail.com>
 F:	package/pru-software-support/
 F:	package/ti-cgt-pru/
@@ -304,15 +311,13 @@ F:	package/orbit/
 N:	Attila Wagner <attila.wagner@onyxinsight.com>
 F:	package/python-canopen/
 
-N:	Ayoub Zaki <ayoub.zaki@embetrix.com>
-F:	package/bmap-writer/
-
 N:	Bagas Sanjaya <bagasdotme@gmail.com>
 F:	package/git/
 
 N:	Bartosz Bilas <b.bilas@grinn-global.com>
 F:	board/stmicroelectronics/stm32mp157a-dk1/
 F:	configs/stm32mp157a_dk1_defconfig
+F:	package/cegui/
 F:	package/log4qt/
 F:	package/python-esptool/
 F:	package/python-pyaes/
@@ -338,9 +343,6 @@ F:	package/tcpdump/
 F:	package/ti-uim/
 F:	package/uhubctl/
 
-N:	Baxiche Su <baxiche@gmail.com>
-F:	package/qt6/qt6multimedia/
-
 N:	Ben Boeckel <mathstuf@gmail.com>
 F:	package/taskd/
 
@@ -417,6 +419,7 @@ F:	package/libfreeglut/
 F:	package/libfribidi/
 F:	package/libg7221/
 F:	package/libglew/
+F:	package/libglfw/
 F:	package/libglu/
 F:	package/libhdhomerun/
 F:	package/libheif/
@@ -491,7 +494,6 @@ F:	package/privoxy/
 F:	package/pure-ftpd/
 F:	package/python-couchdb/
 F:	package/python-cssutils/
-F:	package/python-emailproxy/
 F:	package/python-glslang/
 F:	package/python-mako/
 F:	package/python-mwclient/
@@ -516,7 +518,6 @@ F:	package/tor/
 F:	package/transmission/
 F:	package/tvheadend/
 F:	package/unixodbc/
-F:	package/utfcpp/
 F:	package/vlc/
 F:	package/wget/
 F:	package/wireless-regdb/
@@ -558,10 +559,6 @@ F:	package/vmtouch/
 F:	support/testing/tests/package/test_atftp.py
 F:	support/testing/tests/package/test_zip.py
 
-N:	Brandon Maier <brandon.maier@gmail.com>
-F:	package/dtc/
-F:	support/testing/tests/package/test_dtc*
-
 N:	Brock Williams <brock@cottonwoodcomputer.com>
 F:	package/pdmenu/
 
@@ -572,7 +569,6 @@ F:	boot/ti-k3-boot-firmware/
 F:	boot/ti-k3-r5-loader/
 F:	configs/beagleplay_defconfig
 F:	configs/ti_am62ax_sk_defconfig
-F:	configs/ti_am62px_sk_defconfig
 F:	configs/ti_am62x_sk_defconfig
 F:	configs/ti_am64x_sk_defconfig
 
@@ -603,6 +599,9 @@ F:	package/alsa-plugins/
 N:	Changming Huang <jerry.huang@nxp.com>
 F:	package/qoriq-cadence-dp-firmware/
 
+N:	Chris Dimich <chris.dimich@boundarydevices.com>
+F:	package/freescale-imx/imx-vpu-hantro-daemon/
+
 N:	Chris Packham <judge.packham@gmail.com>
 F:	package/coremark/
 F:	package/coremark-pro/
@@ -610,9 +609,6 @@ F:	package/gstreamer1/gst1-shark/
 F:	package/micropython/
 F:	package/syslog-ng/
 
-N:	Christian Hitz <christian@klarinett.li>
-F:	package/qt6/qt6scxml/
-
 N:	Christian Kellermann <christian.kellermann@solectrix.de>
 F:	package/python-pylibftdi/
 
@@ -725,15 +721,6 @@ F:	configs/odroidc2_defconfig
 F:	package/meson-tools/
 F:	package/odroidc2-firmware/
 
-N:	Daniel Crowe <daniel.crowe@maxmine.com.au>
-F:	package/python-aniso8601/
-F:	package/python-cachelib/
-F:	package/python-flask-caching/
-F:	package/python-flask-restx/
-F:	package/python-pyproj/
-F:	support/testing/tests/package/sample_python_pyproj.py
-F:	support/testing/tests/package/test_python_pyproj.py
-
 N:	Daniel J. Leach <dleach@belcan.com>
 F:	package/dacapo/
 
@@ -798,22 +785,14 @@ F:	package/xinetd/
 
 N:	Dario Binacchi <dario.binacchi@amarulasolutions.com>
 F:	board/bsh/
-F:	board/stmicroelectronics/stm32f746-disco/
 F:	board/stmicroelectronics/stm32f769-disco/
-F:	boot/ti-k3-boot-firmware/
 F:	configs/imx6ulz_bsh_smm_m2_defconfig
 F:	configs/imx8mn_bsh_smm_s2_defconfig
 F:	configs/imx8mn_bsh_smm_s2_pro_defconfig
-F:	configs/stm32f746_disco_sd_defconfig
 F:	configs/stm32f769_disco_sd_defconfig
-F:	package/aespipe/
 F:	package/armadillo/
 F:	package/babeld/
-F:	package/iana-assignments/
-F:	package/inih/
 F:	package/sscep/
-F:	package/tinyinit/
-F:	package/ufs-utils/
 F:	package/uuu/
 
 N:	Dario Binacchi <dariobin@libero.it>
@@ -891,10 +870,6 @@ F:	package/logsurfer/
 N:	Dominik Michael Rauh <dmrauh@posteo.de>
 F:	package/gdal/
 
-N:	Dong Wang <wangdong115@foxmail.com>
-F:	board/friendlyarm/nanopi-neo/
-F:	configs/friendlyarm_nanopi_neo_defconfig
-
 N:	Doug Kehn <rdkehn@gmail.com>
 F:	package/nss-pam-ldapd/
 F:	package/sp-oops-extract/
@@ -944,6 +919,18 @@ N:	Eric Limpens <limpens@gmail.com>
 F:	package/pifmrds/
 F:	package/ympd/
 
+N:	Erico Nunes <nunes.erico@gmail.com>
+F:	board/aarch64-efi/
+F:	configs/aarch64_efi_defconfig
+F:	package/acpica/
+F:	package/acpitool/
+F:	package/efibootmgr/
+F:	package/efivar/
+F:	package/fwts/
+F:	package/spi-tools/
+F:	package/xdotool/
+F:	configs/pc_x86_64_*
+
 N:	Erik Larsson <karl.erik.larsson@gmail.com>
 F:	package/imx-mkimage/
 
@@ -973,9 +960,11 @@ F:	package/tcf-agent/
 N:	Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
 F:	board/ci20/
 F:	configs/ci20_defconfig
+F:	arch/Config.in.nios2
 F:	package/fio/
 F:	package/iptraf-ng/
 F:	package/jimtcl/
+F:	package/mimic/
 F:	package/nodm/
 F:	package/openbox/
 F:	package/supertuxkart/
@@ -1080,6 +1069,7 @@ F:	package/mbedtls/
 F:	package/minissdpd/
 F:	package/minizip/
 F:	package/minizip-zlib/
+F:	package/mongodb/
 F:	package/motion/
 F:	package/mutt/
 F:	package/ncmpc/
@@ -1112,16 +1102,8 @@ N:	Falco Hyfing <hyfinglists@gmail.com>
 F:	package/python-pymodbus/
 
 N:	Fiona Klute <fiona.klute@gmx.de>
-F:	package/*/S*
-F:	package/panel-mipi-dbi-firmware/
-F:	package/python-aiomqtt/
-F:	package/python-dunamai/
-F:	package/python-poetry-dynamic-versioning/
 F:	package/python-pyasynchat/
 F:	package/python-pyasyncore/
-F:	support/testing/tests/package/sample_python_networkmanager_goi.py
-F:	support/testing/tests/package/test_nftables.py
-F:	support/testing/tests/package/test_python_networkmanager_goi.py
 
 N:	Flávio Tapajós <flavio.tapajos@newtesc.com.br>
 F:	configs/asus_tinker-s_rk3288_defconfig
@@ -1133,9 +1115,6 @@ F:	package/rsyslog/
 N:	Florian Fainelli <f.fainelli@gmail.com>
 F:	package/cpulimit/
 
-N:	Florian Larysch <fl@n621.de>
-F:	package/casync-nano/
-
 N:	Floris Bos <bos@je-eigen-domein.nl>
 F:	package/ipmitool/
 F:	package/odhcploc/
@@ -1188,7 +1167,6 @@ F:	package/lpty/
 F:	package/lrandom/
 F:	package/lsqlite3/
 F:	package/lua*
-F:	package/lynis/
 F:	package/lzlib/
 F:	package/moarvm/
 F:	package/mstpd/
@@ -1206,7 +1184,6 @@ F:	package/wsapi-fcgi/
 F:	package/wsapi-xavante/
 F:	package/xavante/
 F:	support/testing/tests/package/test_lua*
-F:	support/testing/tests/package/test_lynis.py
 F:	utils/scancpan
 
 N:	Frank Hunleth <fhunleth@troodon-software.com>
@@ -1224,10 +1201,6 @@ N:	Frank Vanbever <frank.vanbever@mind.be>
 F:	package/libmodsecurity/
 F:	package/nginx-modsecurity/
 
-N:	Gaël PORTAY <gael.portay+rtone@gmail.com>
-F:	board/raspberrypi/
-F:	configs/raspberrypi*
-
 N:	Gao Xiang <hsiangkao@aol.com>
 F:	package/erofs-utils/
 
@@ -1235,7 +1208,6 @@ N:	Gary Bisson <bisson.gary@gmail.com>
 F:	board/boundarydevices/
 F:	configs/nitrogen*
 F:	package/freescale-imx/
-F:	package/freescale-imx/imx-vpu-hantro-daemon/
 F:	package/gstreamer1/gst1-imx/
 F:	package/libimxvpuapi/
 F:	package/mfgtools/
@@ -1366,9 +1338,6 @@ F:	package/python-rpi-ws281x/
 F:	package/python-wtforms/
 F:	package/rpi-rgb-led-matrix/
 
-N:	Guillaume Chaye <guillaume.chaye@zeetim.com>
-F:	package/sane-airscan/
-
 N:	Guillaume William Brs <guillaume.bressaix@gmail.com>
 F:	package/libnids/
 F:	package/libxcrypt/
@@ -1387,6 +1356,9 @@ F:	support/testing/tests/package/sample_python_scipy.py
 F:	support/testing/tests/package/test_python_pybind.py
 F:	support/testing/tests/package/test_python_scipy.py
 
+N:	Gustavo Heinz <gustavo@gsthnz.com>
+F:	package/python-m2crypto/
+
 N:	Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
 F:	board/terasic/de10nano_cyclone5/
 F:	configs/terasic_de10nano_cyclone5_defconfig
@@ -1464,6 +1436,9 @@ F:	package/gcc-bare-metal/
 F:	package/newlib-bare-metal/
 F:	toolchain/toolchain-bare-metal-buildroot/
 
+N:	Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
+F:	package/angularjs/
+
 N:	Ilias Apalodimas <apalos@gmail.com>
 F:	package/keepalived/
 
@@ -1475,19 +1450,7 @@ F:	package/axel/
 F:	package/mawk/
 
 N:	J. Neuschäfer <j.neuschaefer@gmx.net>
-F:	package/execline/
-F:	package/mdevd/
-F:	package/python-rgbmatrix/
-F:	package/rpi-rgb-led-matrix/
-F:	package/s6/
-F:	package/s6-linux-init/
-F:	package/s6-linux-utils/
-F:	package/s6-networking/
-F:	package/s6-portable-utils/
-F:	package/s6-rc/
-F:	package/skalibs/
-F:	package/snooze/
-F:	package/tipidee/
+F:	package/tipidee
 
 N:	Jagan Teki <jagan@amarulasolutions.com>
 F:	board/amarula/
@@ -1541,9 +1504,6 @@ F:	package/serd/
 F:	package/sord/
 F:	package/sratom/
 F:	package/stb/
-F:	package/superiotool/
-F:	package/tailscale/
-F:	package/uefisettings/
 F:	package/zchunk/
 F:	support/testing/tests/package/sample_python_rtoml.py
 F:	support/testing/tests/package/test_python_rtoml.py
@@ -1651,7 +1611,6 @@ F:	package/libite/
 F:	package/libnet/
 F:	package/libteam/
 F:	package/libuev/
-F:	package/lowdown/
 F:	package/mg/
 F:	package/mdnsd/
 F:	package/mini-snmpd/
@@ -1691,8 +1650,6 @@ N:	Johan Oudinet <johan.oudinet@gmail.com>
 F:	package/ejabberd/
 F:	package/erlang-base64url/
 F:	package/erlang-eimp/
-F:	package/erlang-fast-xml/
-F:	package/erlang-fast-yaml/
 F:	package/erlang-goldrush/
 F:	package/erlang-idna/
 F:	package/erlang-jiffy/
@@ -1705,12 +1662,14 @@ F:	package/erlang-p1-oauth2/
 F:	package/erlang-p1-pkix/
 F:	package/erlang-p1-sip/
 F:	package/erlang-p1-stringprep/
+F:	package/erlang-p1-stun/
 F:	package/erlang-p1-tls/
 F:	package/erlang-p1-utils/
+F:	package/erlang-p1-xml/
+F:	package/erlang-p1-xmpp/
+F:	package/erlang-p1-yaml/
 F:	package/erlang-p1-yconf/
 F:	package/erlang-p1-zlib/
-F:	package/erlang-stun/
-F:	package/erlang-xmpp/
 F:	package/forge/
 F:	package/nginx-dav-ext/
 F:	package/vis-network/
@@ -1776,6 +1735,15 @@ F:	package/unclutter-xfixes/
 N:	Joshua Henderson <joshua.henderson@microchip.com>
 F:	package/qt5/qt5wayland/
 
+N:	Jugurtha BELKALEM <jugurtha.belkalem@smile.fr>
+F:	package/bcc/
+F:	package/python-aiofiles/
+F:	package/python-crayons/
+F:	package/python-cycler/
+F:	package/python-matplotlib/
+F:	package/python-opcua-asyncio/
+F:	package/python-piexif/
+
 N:	Juha Rantanen <juha@codercoded.com>
 F:	package/acsccid/
 
@@ -1808,11 +1776,9 @@ F:	configs/ts7680_defconfig
 F:	package/paho-mqtt-c
 
 N:	Julien Olivain <ju.o@free.fr>
-F:	board/freescale/imx93frdm/
 F:	board/qemu/riscv64-virt-efi/
 F:	board/spike/
 F:	board/technexion/imx8mmpico/
-F:	configs/freescale_imx93frdm_defconfig
 F:	configs/imx8mmpico_defconfig
 F:	configs/qemu_riscv64_virt_efi_defconfig
 F:	configs/spike_riscv32_defconfig
@@ -1826,7 +1792,6 @@ F:	package/kexec/
 F:	package/libjxl/
 F:	package/libopenmpt/
 F:	package/mokutil/
-F:	package/oath-toolkit/
 F:	package/octave/
 F:	package/ola/
 F:	package/openblas/
@@ -1874,7 +1839,6 @@ F:	support/testing/tests/package/test_acpica/
 F:	support/testing/tests/package/test_apache.py
 F:	support/testing/tests/package/test_attr.py
 F:	support/testing/tests/package/test_audio_codec_base.py
-F:	support/testing/tests/package/test_audit.py
 F:	support/testing/tests/package/test_bc.py
 F:	support/testing/tests/package/test_bcc.py
 F:	support/testing/tests/package/test_bcc/
@@ -1889,12 +1853,8 @@ F:	support/testing/tests/package/test_cryptsetup.py
 F:	support/testing/tests/package/test_cryptsetup/
 F:	support/testing/tests/package/test_ddrescue.py
 F:	support/testing/tests/package/test_ddrescue/
-F:	support/testing/tests/package/test_dieharder.py
 F:	support/testing/tests/package/test_dmidecode.py
 F:	support/testing/tests/package/test_dos2unix.py
-F:	support/testing/tests/package/test_dosfstools.py
-F:	support/testing/tests/package/test_dosfstools/
-F:	support/testing/tests/package/test_dpdk.py
 F:	support/testing/tests/package/test_ed.py
 F:	support/testing/tests/package/test_ethtool.py
 F:	support/testing/tests/package/test_ethtool/
@@ -1909,7 +1869,6 @@ F:	support/testing/tests/package/test_fwts.py
 F:	support/testing/tests/package/test_gawk.py
 F:	support/testing/tests/package/test_ghostscript.py
 F:	support/testing/tests/package/test_ghostscript/
-F:	support/testing/tests/package/test_git.py
 F:	support/testing/tests/package/test_glslsandbox_player.py
 F:	support/testing/tests/package/test_glslsandbox_player/
 F:	support/testing/tests/package/test_gnupg2.py
@@ -1919,17 +1878,14 @@ F:	support/testing/tests/package/test_gnuradio.py
 F:	support/testing/tests/package/test_gnuradio/
 F:	support/testing/tests/package/test_gpsd.py
 F:	support/testing/tests/package/test_gpsd/
-F:	support/testing/tests/package/test_gstreamer1.py
 F:	support/testing/tests/package/test_gzip.py
 F:	support/testing/tests/package/test_highway.py
 F:	support/testing/tests/package/test_hwloc.py
-F:	support/testing/tests/package/test_hyperfine.py
 F:	support/testing/tests/package/test_iozone.py
 F:	support/testing/tests/package/test_iperf.py
 F:	support/testing/tests/package/test_iperf3.py
 F:	support/testing/tests/package/test_iproute2.py
 F:	support/testing/tests/package/test_iptables.py
-F:	support/testing/tests/package/test_iputils.py
 F:	support/testing/tests/package/test_jailhouse.py
 F:	support/testing/tests/package/test_jq.py
 F:	support/testing/tests/package/test_jq/
@@ -1943,15 +1899,12 @@ F:	support/testing/tests/package/test_lame.py
 F:	support/testing/tests/package/test_less.py
 F:	support/testing/tests/package/test_libcamera.py
 F:	support/testing/tests/package/test_libcamera/
-F:	support/testing/tests/package/test_libcurl.py
 F:	support/testing/tests/package/test_libgpgme.py
 F:	support/testing/tests/package/test_libjxl.py
-F:	support/testing/tests/package/test_lighttpd.py
 F:	support/testing/tests/package/test_links.py
 F:	support/testing/tests/package/test_links/
 F:	support/testing/tests/package/test_lrzip.py
 F:	support/testing/tests/package/test_lrzsz.py
-F:	support/testing/tests/package/test_ltp_testsuite.py
 F:	support/testing/tests/package/test_ltrace.py
 F:	support/testing/tests/package/test_lvm2.py
 F:	support/testing/tests/package/test_lzip.py
@@ -1981,22 +1934,14 @@ F:	support/testing/tests/package/test_ntp.py
 F:	support/testing/tests/package/test_ntp/
 F:	support/testing/tests/package/test_numactl.py
 F:	support/testing/tests/package/test_numactl/
-F:	support/testing/tests/package/test_oath_toolkit.py
 F:	support/testing/tests/package/test_octave.py
 F:	support/testing/tests/package/test_ola.py
 F:	support/testing/tests/package/test_ola/
 F:	support/testing/tests/package/test_openblas.py
-F:	support/testing/tests/package/test_openocd.py
-F:	support/testing/tests/package/test_parted.py
-F:	support/testing/tests/package/test_patch.py
-F:	support/testing/tests/package/test_patch/
 F:	support/testing/tests/package/test_pciutils.py
 F:	support/testing/tests/package/test_perftest.py
 F:	support/testing/tests/package/test_pigz.py
 F:	support/testing/tests/package/test_postgresql.py
-F:	support/testing/tests/package/test_pppd.py
-F:	support/testing/tests/package/test_pppd/
-F:	support/testing/tests/package/test_proj.py
 F:	support/testing/tests/package/test_pv.py
 F:	support/testing/tests/package/test_python_distro.py
 F:	support/testing/tests/package/test_python_gnupg.py
@@ -2007,13 +1952,10 @@ F:	support/testing/tests/package/test_python_midiutil.py
 F:	support/testing/tests/package/test_python_ml_dtypes.py
 F:	support/testing/tests/package/test_python_mpmath.py
 F:	support/testing/tests/package/test_python_pyalsa.py
-F:	support/testing/tests/package/test_python_pyqt5.py
-F:	support/testing/tests/package/test_python_pyqt5/
 F:	support/testing/tests/package/test_python_spake2.py
 F:	support/testing/tests/package/test_python_sympy.py
 F:	support/testing/tests/package/test_rdma_core.py
 F:	support/testing/tests/package/test_rdma_core/
-F:	support/testing/tests/package/test_rrdtool.py
 F:	support/testing/tests/package/test_rt_tests.py
 F:	support/testing/tests/package/test_screen.py
 F:	support/testing/tests/package/test_sed.py
@@ -2031,22 +1973,14 @@ F:	support/testing/tests/package/test_tesseract_ocr.py
 F:	support/testing/tests/package/test_thttpd.py
 F:	support/testing/tests/package/test_trace_cmd.py
 F:	support/testing/tests/package/test_trace_cmd/
-F:	support/testing/tests/package/test_unbound.py
-F:	support/testing/tests/package/test_unbound/
-F:	support/testing/tests/package/test_usbip.py
-F:	support/testing/tests/package/test_usbip/
 F:	support/testing/tests/package/test_usbutils.py
 F:	support/testing/tests/package/test_usbutils/
 F:	support/testing/tests/package/test_vorbis_tools.py
 F:	support/testing/tests/package/test_weston.py
 F:	support/testing/tests/package/test_weston/
-F:	support/testing/tests/package/test_wget.py
-F:	support/testing/tests/package/test_which.py
 F:	support/testing/tests/package/test_wine.py
 F:	support/testing/tests/package/test_xfsprogs.py
 F:	support/testing/tests/package/test_xfsprogs/
-F:	support/testing/tests/package/test_xvisor.py
-F:	support/testing/tests/package/test_xxhash.py
 F:	support/testing/tests/package/test_xz.py
 F:	support/testing/tests/package/test_z3.py
 F:	support/testing/tests/package/test_z3/
@@ -2070,11 +2004,6 @@ F:	package/libodb-mysql/
 F:	package/libqb/
 F:	package/usbguard/
 
-N:	Kanak Shilledar <kanakshilledar@gmail.com>
-F:	board/sipeed/licheepi_4a/
-F:	configs/sipeed_licheepi_4a_defconfig
-F:	package/sipeed-lpi4abin/
-
 N:	Karoly Kasza <kaszak@gmail.com>
 F:	package/irqbalance/
 F:	package/openvmtools/
@@ -2082,6 +2011,7 @@ F:	package/openvmtools/
 N:	Kelvin Cheung <keguang.zhang@gmail.com>
 F:	package/cpuload/
 F:	package/bwm-ng/
+F:	package/ramsmp/
 
 N:	Kieran Bingham <kieran.bingham@ideasonboard.com>
 F:	package/libcamera/
@@ -2165,6 +2095,11 @@ F:	package/python-huepy/
 F:	package/python-tqdm/
 F:	package/rtl8189es/
 
+N:	Louis-Paul Cordier <lpdev@cordier.org>
+F:	package/intel-gmmlib/
+F:	package/intel-mediadriver/
+F:	package/intel-mediasdk/
+
 N:	Luca Ceresoli <luca.ceresoli@bootlin.com>
 F:	board/olimex/a20_olinuxino/
 F:	board/zynq/
@@ -2278,24 +2213,11 @@ N:	Marcus Hoffmann <bubu@bubu1.eu>
 F:	package/nethogs/
 F:	package/pico-sdk/
 F:	package/picotool/
-F:	package/python-immutabledict/
 F:	package/python-jc/
-F:	package/python-pydantic/
-F:	package/python-pydantic-core/
-F:	package/python-pydantic-settings/
 F:	package/python-ruamel-yaml-clib/
-F:	package/python-typing-inspection/
-F:	package/python-tzlocal/
-F:	package/python-waitress/
 F:	support/testing/tests/package/test_python_fastapi.py
-F:	support/testing/tests/package/test_python_pydantic.py
-F:	support/testing/tests/package/test_python_pydantic_settings.py
 F:	support/testing/tests/package/test_python_ruamel_yaml.py
-F:	support/testing/tests/package/test_python_tzlocal.py
-F:	support/testing/tests/package/test_python_waitress.py
 F:	support/testing/tests/package/sample_python_fastapi.py
-F:	support/testing/tests/package/sample_python_pydantic.py
-F:	support/testing/tests/package/sample_python_pydantic_settings.py
 F:	support/testing/tests/package/sample_python_ruamel_yaml.py
 
 N:	Marek Belisko <marek.belisko@open-nandra.com>
@@ -2320,7 +2242,7 @@ F:	configs/qemu_riscv32_virt_defconfig
 F:	configs/qemu_riscv64_virt_defconfig
 
 N:	Marleen Vos <marleen.vos@mind.be>
-F:	board/stmicroelectronics/common/stm32mp1xx/
+F:	board/stmicroelectronics/common/stm32mp157/
 F:	configs/avenger96_defconfig
 F:	configs/stm32mp157a_dk1_defconfig
 F:	configs/stm32mp157c_dk2_defconfig
@@ -2403,13 +2325,6 @@ F:	package/libtraceevent/
 F:	package/libtracefs
 F:	package/linux-tools/linux-tool-rtla.mk.in
 
-N:	Maxime Leroy <maxime@leroys.fr>
-F:	package/grout/
-
-N:	Meena Murthy <meena.murthy@amarulasolutions.com>
-F:	board/engicam/px30core/
-F:	configs/engicam_px30_core_defconfig
-
 N:	Michael Durrant <mdurrant@arcturusnetworks.com>
 F:	board/arcturus/
 F:	configs/arcturus_ucp1020_defconfig
@@ -2491,10 +2406,8 @@ F:	board/versal/
 F:	board/xilinx/
 F:	board/zynq/
 F:	board/zynqmp/
-F:	boot/xilinx-embeddedsw/
 F:	boot/xilinx-prebuilt/
 F:	configs/versal_vck190_defconfig
-F:	configs/versal_vek280_defconfig
 F:	configs/versal_vpk180_defconfig
 F:	configs/zynq_zc702_defconfig
 F:	configs/zynq_zc706_defconfig
@@ -2508,7 +2421,6 @@ F:	package/binutils-bare-metal/
 F:	package/bootgen/
 F:	package/gcc-bare-metal/
 F:	package/newlib-bare-metal/
-F:	package/xilinx-fpgautil/
 F:	toolchain/toolchain-bare-metal-buildroot/
 
 N:	Nicola Di Lieto <nicola.dilieto@gmail.com>
@@ -2551,7 +2463,6 @@ F:	support/testing/tests/package/test_python_git.py
 F:	support/testing/tests/package/test_python_unittest_xml_reporting.py
 
 N:	Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
-F:	package/bluez-alsa/
 F:	package/libgit2/
 
 N:	Nicolas Serafini <nicolas.serafini@ik.me>
@@ -2577,10 +2488,9 @@ F:	package/dbus-broker/
 F:	package/systemd/
 F:	package/tcf-agent/
 
-N:	Leo Yu-Chi Liang <ycliang@andestech.com>
+N:	Yu Chien Peter Lin <peterlin@andestech.com>
 F:	board/andes
 F:	configs/andes_ae350_45_defconfig
-F:	package/andes-spi-burn/
 F:	package/kmon/
 
 N:	Olaf Rempel <razzor@kopf-tisch.de>
@@ -2631,10 +2541,6 @@ F:	support/testing/tests/package/test_lxc/
 N:	Patrick Oppenlander <patrick.oppenlander@gmail.com>
 F:	package/minisign/
 
-N:	Patrik Olsson <johan.patrik.olsson@gmail.com>
-F:	board/radxa/rock4se
-F:	configs/rock4se_defconfig
-
 N:	Paul Cercueil <paul@crapouillou.net>
 F:	package/libiio/
 F:	package/lightning/
@@ -2696,7 +2602,6 @@ F:	package/python-texttable/
 F:	package/python-validators/
 F:	package/python-webob/
 F:	package/python-websocket-client/
-F:	package/rnnoise/
 F:	package/sedutil/
 F:	package/tpm2-totp/
 F:	package/triggerhappy/
@@ -2815,9 +2720,6 @@ F:	package/gupnp-av/
 F:	package/let-me-create/
 F:	package/nanomsg/
 
-N:	Ralf Dragon <hypnotoad@lindra.de>
-F:	package/python-pyqt5-sip/
-
 N:	Ramon Fried <rfried.dev@gmail.com>
 F:	package/bitwise/
 
@@ -2831,22 +2733,14 @@ F:	package/python-jmespath/
 F:	package/python-pymupdf/
 F:	package/python-rsa/
 F:	package/python-s3transfer/
-F:	package/python-sdbus/
-F:	package/python-sdbus-networkmanager/
 F:	support/testing/tests/package/sample_python_jmespath.py
 F:	support/testing/tests/package/sample_python_pymupdf.py
 F:	support/testing/tests/package/sample_python_rsa.py
 F:	support/testing/tests/package/sample_python_s3transfer.py
-F:	support/testing/tests/package/sample_python_sdbus.py
-F:	support/testing/tests/package/sample_python_sdbus_networkmanager.py
-F:	support/testing/tests/package/sample_python_urllib3.py
 F:	support/testing/tests/package/test_python_jmespath.py
 F:	support/testing/tests/package/test_python_pymupdf.py
 F:	support/testing/tests/package/test_python_rsa.py
 F:	support/testing/tests/package/test_python_s3transfer.py
-F:	support/testing/tests/package/test_python_sdbus.py
-F:	support/testing/tests/package/test_python_sdbus_networkmanager.py
-F:	support/testing/tests/package/test_python_urllib3.py
 
 N:	Raphael Pavlidis <raphael.pavlidis@gmail.com>
 F:	package/nvidia-persistenced/
@@ -2968,7 +2862,6 @@ F:	support/testing/tests/package/test_python_mako.py
 F:	toolchain/
 
 N:	Roy Kollen Svendsen <roykollensvendsen@gmail.com>
-F:	package/dlib/
 F:	package/qt6/
 
 N:	Rufus Segar <rhs@riseup.net>
@@ -2980,7 +2873,6 @@ F:	package/biosdevname/
 N:	Saeed Kazemi <kazemi.ms@gmail.com>
 F:	package/eza/
 F:	package/fd/
-F:	package/parsec/
 F:	package/parsec-tool/
 F:	package/procs/
 F:	package/mxt-app/
@@ -2995,13 +2887,10 @@ F:	package/ripgrep/
 N:	Sébastien Szymanski <sebastien.szymanski@armadeus.com>
 F:	board/armadeus/
 F:	configs/armadeus*
-F:	package/nxp-bt-wifi-firmware/
-F:	package/nxp-mwifiex/
 F:	package/mmc-utils/
 F:	package/python-flask-jsonrpc/
 F:	package/python-flask-login/
 F:	package/qt5/qt5charts/
-F:	package/wlr-randr/
 
 N:	Semyon Kolganov <semenak94@mail.ru>
 F:	package/fmt/
@@ -3020,14 +2909,12 @@ F:	package/sdbus-cpp/
 N:	Sergey Matyukevich <geomatsi@gmail.com>
 F:	boot/arm-trusted-firmware/
 F:	board/linksprite/pcduino
-F:	board/orangepi/orangepi-5-plus
 F:	board/orangepi/orangepi-zero
 F:	board/orangepi/orangepi-one
 F:	board/orangepi/orangepi-pc-plus/
 F:	board/orangepi/orangepi-zero-plus2/
 F:	board/orangepi/orangepi-zero2w/
 F:	configs/linksprite_pcduino_defconfig
-F:	configs/orangepi_5_plus_defconfig
 F:	configs/orangepi_one_defconfig
 F:	configs/orangepi_pc_plus_defconfig
 F:	configs/orangepi_zero_defconfig
@@ -3103,18 +2990,6 @@ F:	package/libvpx/
 F:	package/mesa3d-demos/
 F:	package/ti-gfx/
 
-N:	Stefan Hager <stefan.hager@ginzinger.com>
-F:	package/cpuinfo/
-F:	package/farmhash/
-F:	package/fp16/
-F:	package/fft2d/
-F:	package/gemmlowp/
-F:	package/psimd/
-F:	package/pthreadpool/
-F:	package/ruy/
-F:	package/tensorflow-lite/
-F:	package/xnnpack/
-
 N:	Stefan Nickl <Stefan.Nickl@gmail.com>
 F:	board/freescale/imx8dxlevk/
 F:	configs/freescale_imx8dxlevk_defconfig
@@ -3218,7 +3093,6 @@ F:	package/xorcurses/
 
 N:	Thomas Perale <thomas.perale@mind.be>
 F:	package/go/
-F:	utils/generate-cyclonedx
 
 N:	Thomas Petazzoni <thomas.petazzoni@bootlin.com>
 F:	arch/Config.in.arm
@@ -3236,15 +3110,16 @@ F:	package/cifs-utils/
 F:	package/cloop/
 F:	package/cmake/
 F:	package/cramfs/
-F:	package/cross-ldd/
 F:	package/dmidecode/
 F:	package/double-conversion/
 F:	package/flashrom/
 F:	package/gcc/
 F:	package/genext2fs/
+F:	package/genromfs/
 F:	package/getent/
 F:	package/gnu-efi/
 F:	package/heirloom-mailx/
+F:	package/hiawatha/
 F:	package/igh-ethercat/
 F:	package/intltool/
 F:	package/jh71xx-tools/
@@ -3302,13 +3177,12 @@ F:	support/testing/tests/package/test_python_flask.py
 F:	support/testing/tests/package/test_python_flask_expects_json.py
 F:	support/testing/tests/package/test_python_git.py
 F:	support/testing/tests/package/test_python_unittest_xml_reporting.py
-F:	support/testing/tests/toolchain/test_external_arm.py
 F:	toolchain/
 
 N:	Timo Ketola <timo.ketola@exertus.fi>
 F:	package/fbgrab/
 
-N:	Titouan Christophe <titouan.christophe@mind.be>
+N:	Titouan Christophe <titouanchristophe@gmail.com>
 F:	package/avro-c/
 F:	package/mosquitto/
 F:	package/python-avro/
@@ -3354,33 +3228,21 @@ F:	package/rtl8822cs/
 N:	Victor Huesca <victor.huesca@bootlin.com>
 F:	support/testing/tests/core/test_root_password.py
 
-N:	Vincent Jardin <vjardin@free.fr>
-F:	board/nvidia/bf3/
-F:	configs/nvidia_bf3_defconfig
-F:	package/bfscripts/
-F:	package/dpdk/
-F:	package/libecoli/
-
 N:	Vincent Prince <vincent.prince.fr@gmail.com>
 F:	package/nss-myhostname/
 F:	package/utp_com/
 
 N:	Vincent Stehlé <vincent.stehle@arm.com>
 F:	board/arm/fvp-ebbr/
-F:	board/pine64/rockpro64-ebbr/
 F:	board/qemu/aarch64-ebbr/
 F:	board/qemu/arm-ebbr/
 F:	configs/arm_fvp_ebbr_defconfig
 F:	configs/qemu_aarch64_ebbr_defconfig
 F:	configs/qemu_arm_ebbr_defconfig
-F:	configs/rockpro64_ebbr_defconfig
 F:	package/edk2-non-osi/
-F:	support/testing/tests/boot/test_edk2.py
 
 N:	Vincent Stehlé <vincent.stehle@laposte.net>
-F:	board/arm/foundation-v8/
 F:	board/bananapi/bananapi-m2-zero/
-F:	configs/arm_foundationv8_defconfig
 F:	configs/bananapi_m2_zero_defconfig
 F:	configs/uevm5432_defconfig
 F:	package/i7z/
@@ -3389,8 +3251,6 @@ F:	package/pixz/
 F:	package/zerofree/
 F:	support/testing/tests/package/test_msr_tools*
 F:	support/testing/tests/package/test_pixz.py
-F:	support/testing/tests/package/test_xen.py
-F:	support/testing/tests/package/test_xen/
 F:	support/testing/tests/package/test_zerofree.py
 
 N:	Vinicius Tinti <viniciustinti@gmail.com>
@@ -3400,12 +3260,6 @@ N:	Vivien Didelot <vivien.didelot@gmail.com>
 F:	board/technologic/ts5500/
 F:	configs/ts5500_defconfig
 
-N:	Vladimir Oltean <olteanv@gmail.com>
-F:	package/qoriq-ddr-phy-binary/
-F:	package/qoriq-firmware-inphi/
-F:	package/qoriq-mc-binary/
-F:	package/qoriq-mc-utils/
-
 N:	Volkov Viacheslav <sv99@inbox.ru>
 F:	package/v4l2grab/
 F:	package/zbar/
@@ -3415,18 +3269,13 @@ F:	package/ngrep/
 
 N:	Waldemar Brodkorb <wbx@openadk.org>
 F:	board/qemu/riscv32-virt/
-F:	board/stmicroelectronics/stm32f746-disco/
 F:	configs/qemu_riscv32_nommu_virt_defconfig
-F:	configs/stm32f746_disco_sd_defconfig
 F:	package/asterisk/
-F:	package/evilwm/
-F:	package/fbv/
 F:	package/libjwt/
 F:	package/mksh/
 F:	package/ruby/
 F:	package/uclibc/
 F:	package/uclibc-ng-test/
-F:	package/zabbix/
 F:	support/testing/tests/package/test_ruby.py
 
 N:	Will Newton <will.newton@gmail.com>
@@ -3470,6 +3319,54 @@ F:	package/casync/
 F:	package/gloox/
 F:	package/tpm2-pkcs11/
 
+N:	Yann E. MORIN <yann.morin.1998@free.fr>
+F:	fs/squashfs/
+F:	package/asterisk/
+F:	package/cegui/
+F:	package/dahdi-linux/
+F:	package/dahdi-tools/
+F:	package/dbus-broker/
+F:	package/dtc/
+F:	package/dtv-scan-tables/
+F:	package/freerdp/
+F:	package/keyutils/
+F:	package/libbsd/
+F:	package/libedit/
+F:	package/libgsm/
+F:	package/libiberty/
+F:	package/libinput/
+F:	package/libiscsi/
+F:	package/libpri/
+F:	package/libseccomp/
+F:	package/libss7/
+F:	package/linux-firmware/
+F:	package/linux-tools/
+F:	package/matchbox*
+F:	package/mesa3d-headers/
+F:	package/nbd/
+F:	package/nut/
+F:	package/nvidia-driver/
+F:	package/python-pyparsing/
+F:	package/pkg-download.mk
+F:	package/pkg-waf.mk
+F:	package/slirp/
+F:	package/snappy/
+F:	package/spice/
+F:	package/spice-protocol/
+F:	package/systemd/
+F:	package/systemd-bootchart/
+F:	package/tmux/
+F:	package/tvheadend/
+F:	package/usbredir/
+F:	package/vde2/
+F:	package/w_scan/
+F:	package/wayland/
+F:	package/weston/
+F:	package/wtfutil/
+F:	package/zisofs-tools/
+F:	support/download/
+F:	support/testing/tests/graphics_base.py
+
 N:	Yann E. MORIN <yann.morin@orange.com>
 F:	.editorconfig
 F:	package/gpsd/
@@ -3488,6 +3385,7 @@ F:	package/can-utils/
 F:	package/circus/
 F:	package/dhcpcd/
 F:	package/feh/
+F:	package/giblib/
 F:	package/hostapd/
 F:	package/imlib2/
 F:	package/jquery-datetimepicker/
@@ -3507,7 +3405,6 @@ F:	package/libuci/
 F:	package/libxmlb/
 F:	package/linux-firmware/
 F:	package/linux-serial-test/
-F:	package/lpac/
 F:	package/modem-manager/
 F:	package/ncftp/
 F:	package/nftables/

Makefile

@@ -92,9 +92,9 @@ all:
 .PHONY: all
 
 # Set and export the version string
-export BR2_VERSION := 2025.05-rc1
+export BR2_VERSION := 2024.08.1
 # Actual time the release is cut (for reproducible builds)
-BR2_VERSION_EPOCH = 1747650000
+BR2_VERSION_EPOCH = 1729431000
 
 # Save running make version since it's clobbered by the make package
 RUNNING_MAKE_VERSION := $(MAKE_VERSION)
@@ -353,7 +353,7 @@ export HOSTARCH := $(shell LC_ALL=C $(HOSTCC_NOCCACHE) -v 2>&1 | \
 
 # When adding a new host gcc version in Config.in,
 # update the HOSTCC_MAX_VERSION variable:
-HOSTCC_MAX_VERSION := 15
+HOSTCC_MAX_VERSION := 11
 
 HOSTCC_VERSION := $(shell V=$$($(HOSTCC_NOCCACHE) --version | \
 	sed -n -r 's/^.* ([0-9]*)\.([0-9]*)\.([0-9]*)[ ]*.*/\1 \2/p'); \
@@ -1218,7 +1218,7 @@ help:
 # $(2): br2-external name, empty for bundled
 define list-defconfigs
 	@first=true; \
-	for defconfig in $$(find $(1)/configs -name '*_defconfig' |sort); do \
+	for defconfig in $(1)/configs/*_defconfig; do \
 		[ -f "$${defconfig}" ] || continue; \
 		if $${first}; then \
 			if [ "$(2)" ]; then \
@@ -1228,7 +1228,7 @@ define list-defconfigs
 			fi; \
 			first=false; \
 		fi; \
-		defconfig="$${defconfig#$(1)/configs/}"; \
+		defconfig="$${defconfig##*/}"; \
 		printf "  %-35s - Build for %s\n" "$${defconfig}" "$${defconfig%_defconfig}"; \
 	done; \
 	$${first} || printf "\n"

arch/Config.in

@@ -12,9 +12,6 @@ config BR2_SOFT_FLOAT
 config BR2_USE_MMU
 	bool
 
-config BR2_ARCH_HAS_FDPIC_SUPPORT
-	bool
-
 choice
 	prompt "Target Architecture"
 	default BR2_i386
@@ -143,6 +140,14 @@ config BR2_mips64el
 	  http://www.mips.com/
 	  http://en.wikipedia.org/wiki/MIPS_Technologies
 
+config BR2_nios2
+	bool "Nios II"
+	select BR2_USE_MMU
+	help
+	  Nios II is a soft core processor from Altera Corporation.
+	  http://www.altera.com/
+	  http://en.wikipedia.org/wiki/Nios_II
+
 config BR2_or1k
 	bool "OpenRISC"
 	select BR2_USE_MMU
@@ -307,10 +312,6 @@ config BR2_ARCH_NEEDS_GCC_AT_LEAST_14
 	bool
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_13
 
-config BR2_ARCH_NEEDS_GCC_AT_LEAST_15
-	bool
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_14
-
 # The following string values are defined by the individual
 # Config.in.$ARCH files
 config BR2_ARCH
@@ -385,6 +386,10 @@ if BR2_mips || BR2_mips64 || BR2_mipsel || BR2_mips64el
 source "arch/Config.in.mips"
 endif
 
+if BR2_nios2
+source "arch/Config.in.nios2"
+endif
+
 if BR2_or1k
 source "arch/Config.in.or1k"
 endif
@@ -432,16 +437,6 @@ config BR2_BINFMT_ELF
 	  and executables used across different architectures and
 	  operating systems.
 
-config BR2_BINFMT_FDPIC
-	bool "FDPIC"
-	depends on BR2_ARCH_HAS_FDPIC_SUPPORT
-	select BR2_BINFMT_SUPPORTS_SHARED
-	help
-	  ELF FDPIC binaries are based on ELF, but allow the individual
-	  load segments of a binary to be located in memory
-	  independently of each other. This makes this format ideal for
-	  use in environments where no MMU is available.
-
 config BR2_BINFMT_FLAT
 	bool "FLAT"
 	depends on !BR2_USE_MMU

arch/Config.in.arm

@@ -89,20 +89,11 @@ config BR2_ARM_CPU_ARMV7A
 
 config BR2_ARM_CPU_ARMV7M
 	bool
-	select BR2_ARCH_HAS_FDPIC_SUPPORT
 
 config BR2_ARM_CPU_ARMV8A
 	bool
 	select BR2_USE_MMU
 
-# Armv9.0-A base specification is a super-set of Armv8.5-A. It is
-# fully compatible with Armv8. This symbol is defined to allow checks
-# for doing Armv9 optimization. Armv8 is also selected for
-# compatibility.
-config BR2_ARM_CPU_ARMV9A
-	bool
-	select BR2_ARM_CPU_ARMV8A
-
 choice
 	prompt "Target Architecture Variant"
 	default BR2_cortex_a53 if BR2_ARCH_IS_64
@@ -474,14 +465,6 @@ config BR2_cortex_a76_a55
 	select BR2_ARM_CPU_HAS_FP_ARMV8
 	select BR2_ARM_CPU_ARMV8A
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_9
-config BR2_cortex_a78
-	bool "cortex-A78"
-	select BR2_ARM_CPU_HAS_ARM if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_NEON if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_THUMB2 if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_11
 config BR2_neoverse_n1
 	bool "neoverse-N1 (aka ares)"
 	select BR2_ARM_CPU_HAS_ARM if !BR2_ARCH_IS_64
@@ -504,20 +487,6 @@ config BR2_saphira
 	select BR2_ARM_CPU_HAS_FP_ARMV8
 	select BR2_ARM_CPU_ARMV8A
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_8
-
-comment "armv9.0a cores"
-config BR2_cortex_a710
-	bool "Cortex-A710 (aka matterhorn)"
-	depends on BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV9A
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_12
-config BR2_neoverse_n2
-	bool "neoverse-N2 (aka perseus)"
-	depends on BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV9A
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_11
 endchoice
 
 config BR2_ARM_ENABLE_NEON
@@ -906,14 +875,10 @@ config BR2_GCC_TARGET_CPU
 	default "cortex-a75.cortex-a55"	if BR2_cortex_a75_a55
 	default "cortex-a76"	if BR2_cortex_a76
 	default "cortex-a76.cortex-a55"	if BR2_cortex_a76_a55
-	default "cortex-a78"	if BR2_cortex_a78
 	default "neoverse-n1"	if BR2_neoverse_n1
 	default "tsv110"	if BR2_tsv110
 	# armv8.4a
 	default "saphira"	if BR2_saphira
-	# armv9.0a
-	default "cortex-a710"	if BR2_cortex_a710
-	default "neoverse-n2"	if BR2_neoverse_n2
 
 config BR2_GCC_TARGET_ABI
 	default "aapcs-linux"	if BR2_arm || BR2_armeb

arch/Config.in.m68k

@@ -23,11 +23,6 @@ choice
 	help
 	  Specific CPU variant to use
 
-config BR2_m68k_68030
-	bool "68030"
-	select BR2_m68k_m68k
-	select BR2_USE_MMU
-
 config BR2_m68k_68040
 	bool "68040"
 	select BR2_m68k_m68k
@@ -41,7 +36,6 @@ config BR2_m68k_cf5208
 endchoice
 
 config BR2_GCC_TARGET_CPU
-	default "68030"		if BR2_m68k_68030
 	default "68040"		if BR2_m68k_68040
 	default "5208"		if BR2_m68k_cf5208
 

arch/Config.in.nios2

@@ -0,0 +1,14 @@
+config BR2_ARCH
+	default "nios2"
+
+config BR2_NORMALIZED_ARCH
+	default "nios2"
+
+config BR2_ENDIAN
+	default "LITTLE"
+
+config BR2_READELF_ARCH_NAME
+	default "Altera Nios II"
+
+# vim: ft=kconfig
+# -*- mode:kconfig; -*-

board/aarch64-efi/patches/linux/linux.hash

@@ -1,2 +0,0 @@
-# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc
-sha256  62148e7e17f54c4a5ab5e75ad4882682c54bee818948be61a5963234fc0849fc  linux-6.11.11.tar.xz

board/aarch64-efi/post-image.sh

@@ -1,5 +1,5 @@
 #!/bin/sh
 
-BOARD_DIR=$(dirname "$0")
+BOARD_DIR="$(dirname $0)"
 
-cp -f "${BOARD_DIR}/grub.cfg" "${BINARIES_DIR}/efi-part/EFI/BOOT/grub.cfg"
+cp -f ${BOARD_DIR}/grub.cfg ${BINARIES_DIR}/efi-part/EFI/BOOT/grub.cfg

board/acmesystems/acqua-a5/at91-sama5d3_acqua.dts

@@ -9,7 +9,7 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-#include "sama5d31.dtsi"
+#include "microchip/sama5d31.dtsi"
 
 / {
 	model = "Acme Systems Acqua SOM";
@@ -149,14 +149,8 @@
 					#address-cells = <1>;
 					#size-cells = <1>;
 
-					nvmem-layout {
-						compatible = "fixed-layout";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						eth0_addr: eth-mac-addr@9A {
-							reg = <0x0 0x06>;
-						};
+					eth0_addr: eth-mac-addr@9A {
+						reg = <0x0 0x06>;
 					};
 				};
 				

board/acmesystems/acqua-a5/patches/linux/linux.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  87be0360df0931b340d2bac35161a548070fbc3a8c352c49e21e96666c26aeb4  linux-6.12.9.tar.xz
+sha256  b66a5b863b0f8669448b74ca83bd641a856f164b29956e539bbcb5fdeeab9cc6  linux-6.6.30.tar.xz

board/andes/ae350/readme.txt

@@ -41,49 +41,6 @@ After building, you should obtain the following files:
   |-- u-boot-spl.bin
   `-- u-boot.itb
 
-How to update the bootloader and device-tree
-============================================
-
-To update the bootloader and device tree, make sure you have
-an ICEman (Andes OpenOCD [1]) and AICE [2] connection set up
-as below:
-
-  Local Host                 Local/Remote Host
- .-----------------.          .--------------.
- | buildroot images|          |              |
- |                 |         ICEman host <IP:PORT>
- | .----------.    |          |  .--------.  |
- | | SPI_burn |<---+--socket--+->| ICEman |  |
- | '----------'    |          |  '--.-----'  |
- '-----------------'          '-----|--------'
-                                    |
-                                    USB
-   .--------------.                 |
-   | target       |           .-----v-----.
-   | board        <----JTAG---| AICE      |
-   |              |           '-----------'
-   '--------------'
-
-[1] https://github.com/andestech/ICEman
-[2] https://www.andestech.com/en/products-solutions/andeshape-platforms/aice-micro/
-
-The Andes SPI_burn tool will be located in output/host/bin. Use
-the following commands to update the bootloader and device tree:
-
-  $ SPI_burn --host $ICE_IP --port $ICE_BURNER_PORT --addr 0x0     -i u-boot-spl.bin
-  $ SPI_burn --host $ICE_IP --port $ICE_BURNER_PORT --addr 0x10000 -i u-boot.itb
-  $ SPI_burn --host $ICE_IP --port $ICE_BURNER_PORT --addr 0xf0000 -i ae350_ax45mp.dtb
-
-Note that the --addr option specifies the offset starting from
-the flash base address 0x80000000 and set by U-Boot configurations.
-e.g.
-u-boot-spl.bin  : CONFIG_SPL_TEXT_BASE=0x80000000
-u-boot.itb      : CONFIG_SPL_LOAD_FIT_ADDRESS=0x80010000
-ae350_ax45mp.dtb: CONFIG_SYS_FDT_BASE=0x800f0000
-
-How to write the SD card
-========================
-
 Copy the sdcard.img to a SD card with "dd":
 
   $ sudo dd if=sdcard.img of=/dev/sdX bs=4096

board/andes/ae350/uboot.config.fragment

@@ -1,5 +1,6 @@
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_MMC=y
+# CONFIG_SPL_RAM_SUPPORT is not set
 CONFIG_SPL_OPENSBI_LOAD_ADDR=0x0
 CONFIG_SPL_OPENSBI_SCRATCH_OPTIONS=0x0
 CONFIG_DISPLAY_CPUINFO=y

board/arm/foundation-v8/patches/linux/linux.hash

@@ -1,2 +1,2 @@
-# From https://cdn.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc
-sha256  5ff5bd84ea0e22c53437302db5d394d0a92d8b8b1a88ce20d1098298e9f7630a  linux-6.12.15.tar.xz
+# Locally calculated
+sha256  b0bb92d982f88380e5b2059349c3a862e0afa712e0646eb0e082b9c2c5cb5176  linux-6.8.10.tar.xz

board/arm/foundation-v8/readme.txt

@@ -1,34 +1,16 @@
-Introduction
-============
-
 This is the support for the ARM Foundation v8 machine emulated by the
 ARM software simulator of the AArch64 architecture.
 
-Building
-========
+First, one has to download the AArch64 software simulator from:
 
-  $ make arm_foundationv8_defconfig
-  $ make
+  https://developer.arm.com/-/media/Files/downloads/ecosystem-models/FM_11_25/Foundation_Platform_11.25_15_Linux64.tgz
 
-Generated files under output/images:
-
-* linux-system.axf: An image comprising the boot-wrapper-aarch64 minimal
-                    firmware and bootloader, a Devicetree and the Linux kernel.
-* rootfs.ext2:      The OS root filesystem.
-
-Running on the simulator
-========================
-
-Download the AArch64 software simulator from one of the following sources,
-corresponding to your host computer:
-
-- https://developer.arm.com/-/cdn-downloads/permalink/FVPs-Architecture/FM-11.27/Foundation_Platform_11.27_19_Linux64.tgz
-- https://developer.arm.com/-/cdn-downloads/permalink/FVPs-Architecture/FM-11.27/Foundation_Platform_11.27_19_Linux64_armv8l.tgz
+Then, use the arm_foundationv8_defconfig configuration to build your
+Buildroot system.
 
 Finally, boot your system with:
 
  ${LOCATION_OF_FOUNDATIONV8_SIMULATOR}/models/Linux64_GCC-9.3/Foundation_Platform \
-    --arm-v8.0 \
     --image output/images/linux-system.axf \
     --block-device output/images/rootfs.ext2 \
     --network=nat \

board/arm/fvp-ebbr/patches/arm-trusted-firmware/0001-feat-fvp-add-stdout-path.patch

@@ -0,0 +1,45 @@
+From 8c30a0c7fe0162de0618b26fb34cc91ea582e5f7 Mon Sep 17 00:00:00 2001
+From: Debbie Martin <Debbie.Martin@arm.com>
+Date: Wed, 27 Sep 2023 18:05:26 +0100
+Subject: [PATCH] feat(fvp): add stdout-path
+
+Add stdout-path to the fvp-base devicetree to be passed to BL33 (U-Boot)
+and then to the Linux kernel to be compliant to Arm SystemReady IR:
+https://developer.arm.com/documentation/DUI1101/2-0/
+Configure-U-Boot-for-SystemReady/Adapt-the-Devicetree
+
+This has been tested by booting fvp-base to Linux and ensuring the
+console is accessible.
+
+Change-Id: Iae98630f18f735ce344c1158f41f358c2a49eeb6
+Signed-off-by: Diego Sueiro <Diego.Sueiro@arm.com>
+Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
+Upstream: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/+/8c30a0c7fe0162de0618b26fb34cc91ea582e5f7%5E!/
+Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
+---
+ fdts/fvp-base-psci-common.dtsi | 7 ++++---
+ 1 file changed, 4 insertions(+), 3 deletions(-)
+
+diff --git a/fdts/fvp-base-psci-common.dtsi b/fdts/fvp-base-psci-common.dtsi
+index 79cf37d3b0..ff31ba7616 100644
+--- a/fdts/fvp-base-psci-common.dtsi
++++ b/fdts/fvp-base-psci-common.dtsi
+@@ -27,11 +27,12 @@
+ 	#address-cells = <2>;
+ 	#size-cells = <2>;
+ 
++	chosen {
++		stdout-path = "serial0:115200n8";
+ #if (ENABLE_RME == 1)
+-	chosen { bootargs = "console=ttyAMA0 earlycon=pl011,0x1c090000 root=/dev/vda ip=on";};
+-#else
+-	chosen {};
++		bootargs = "console=ttyAMA0 earlycon=pl011,0x1c090000 root=/dev/vda ip=on";
+ #endif
++	};
+ 
+ 	aliases {
+ 		serial0 = &v2m_serial0;
+-- 
+2.43.0
+

board/arm/fvp-ebbr/patches/arm-trusted-firmware/arm-trusted-firmware.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  c0f23ccc71c49989e9ad238acf334473c17b7c88f79a20c829c3d443e3794a22  arm-trusted-firmware-v2.11-git4.tar.gz
+sha256  7efa89e1b4e4106ee05d68e876c8efbb146364d89cfd5d26bf4647b09c08f32b  arm-trusted-firmware-v2.10-git4.tar.gz

board/arm/fvp-ebbr/patches/linux/linux.hash

@@ -1,2 +1,2 @@
-# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc
-sha256  524858852f5869a9ef17de8b1e6e7faf05bcb2c462bc96b3c24dbf82ede373cf  linux-6.10.12.tar.xz
+# Locally calculated
+sha256  b78dcd09f6b725872a2c0c87a70a064b0fbbcccfe5ce60aa46c669934a9e28b6  linux-6.8.11.tar.xz

board/arm/fvp-ebbr/patches/uboot/uboot.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  f591da9ab90ef3d6b3d173766d0ddff90c4ed7330680897486117df390d83c8f  u-boot-2024.07.tar.bz2
+sha256  077cf8ca283411103ad274a3724dacb5068ede824de749beff9c9e5b531b43ea  u-boot-2024.07-rc3.tar.bz2

board/arm/fvp-ebbr/readme.txt

@@ -26,8 +26,8 @@ Running on the FVP
 Download the FVP from one of the following sources, corresponding to your host
 computer:
 
-- https://developer.arm.com/-/cdn-downloads/permalink/Fixed-Virtual-Platforms/FM-11.27/FVP_Base_RevC-2xAEMvA_11.27_19_Linux64.tgz
-- https://developer.arm.com/-/cdn-downloads/permalink/Fixed-Virtual-Platforms/FM-11.27/FVP_Base_RevC-2xAEMvA_11.27_19_Linux64_armv8l.tgz
+- https://developer.arm.com/-/media/Files/downloads/ecosystem-models/FM_11_25/FVP_Base_RevC-2xAEMvA_11.25_15_Linux64.tgz
+- https://developer.arm.com/-/media/Files/downloads/ecosystem-models/FM_11_25/FVP_Base_RevC-2xAEMvA_11.25_15_Linux64_armv8l.tgz
 
 The FVP will be located under one of the corresponding folders:
 

board/beagleboard/beaglebone/patches/linux/linux.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  203743e32c9fba3bb9f965c1b3799977961a9d25071d6d482d96d74adfdbaadb  linux-6.12.17-ti-arm32-r9.tar.gz
+sha256  f1ae7325c6c146e0f852866a3bfd3f90ae1b5f46e414bc99a38384ed677e3721  linux-6.6.32-ti-arm32-r7.tar.gz

board/beagleboard/beaglebone/patches/uboot/uboot.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  439d3bef296effd54130be6a731c5b118be7fddd7fcc663ccbc5fb18294d8718  u-boot-2025.04.tar.bz2
+sha256  f591da9ab90ef3d6b3d173766d0ddff90c4ed7330680897486117df390d83c8f  u-boot-2024.07.tar.bz2

board/beagleboard/beagleplay/patches/arm-trusted-firmware/arm-trusted-firmware.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  c0f23ccc71c49989e9ad238acf334473c17b7c88f79a20c829c3d443e3794a22  arm-trusted-firmware-v2.11-git4.tar.gz
+sha256  7efa89e1b4e4106ee05d68e876c8efbb146364d89cfd5d26bf4647b09c08f32b  arm-trusted-firmware-v2.10-git4.tar.gz

board/beagleboard/beagleplay/patches/linux/linux.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  774698422ee54c5f1e704456f37c65c06b51b4e9a8b0866f34580d86fef8e226  linux-6.10.tar.xz
+sha256  24fa01fb989c7a3e28453f117799168713766e119c5381dac30115f18f268149  linux-6.9.tar.xz

board/beagleboard/beagleplay/patches/ti-k3-r5-loader/ti-k3-r5-loader.hash

@@ -1 +0,0 @@
-../uboot/uboot.hash

board/beagleboard/beagleplay/patches/ti-k3-r5-loader/ti-k3-r5-loader.hash

@@ -0,0 +1,2 @@
+# Locally calculated
+sha256  18a853fe39fad7ad03a90cc2d4275aeaed6da69735defac3492b80508843dd4a  u-boot-2024.04.tar.bz2

board/beagleboard/beagleplay/patches/uboot/uboot.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  f591da9ab90ef3d6b3d173766d0ddff90c4ed7330680897486117df390d83c8f  u-boot-2024.07.tar.bz2
+sha256  18a853fe39fad7ad03a90cc2d4275aeaed6da69735defac3492b80508843dd4a  u-boot-2024.04.tar.bz2

board/beagleboard/beaglev_fire/README.txt

@@ -108,12 +108,12 @@ https://docs.beagleboard.org/latest/boards/beaglev/fire/demos-and-tutorials/gate
   Unzip the downloaded artifacts.zip file.
 
   Go to the custom FPGA design directory:
-    'cd artifacts/bitstreams/my_custom_fpga_design/LinuxProgramming/'
+    'cd artifacts/bitstreams/my_custom_fpga_design'
 
   On your Linux host development computer, copy the bitstream to BeagleV-Fire
   board, replacing </path/to/your/> with the path to your BeagleV-Fire root file
   system.
-    'cp ./* /path/to/your/buildroot/board/beagleboard/beaglev_fire/rootfs-overlay/lib/firmware/'
+    'cp -r ./LinuxProgramming /path/to/your/buildroot/board/beagleboard/beaglev_fire/rootfs-overlay/etc/'
 
   To apply these changes to your image, make sure to re-build it with:
     `make`
@@ -121,7 +121,14 @@ https://docs.beagleboard.org/latest/boards/beaglev/fire/demos-and-tutorials/gate
   Then, re-flash your image - to ensure you have the necessary firmware files - by
   following the above section "Flashing the image to your eMMC".
 
-  On BeagleV-Fire initiate the reprogramming of the FPGA with your gateware bitstream:
-    `/usr/share/microchip/update-gateware.sh`
+  On BeagleV-Fire,
+    1. Make your update gateware script executable
+      'chmod +x /usr/share/microchip/update-gateware.sh'
+    2. Create a firmware directory
+      'mkdir /lib/firmware'
+    3. Change to the directory of your gateware script
+      `cd /usr/share/microchip/`
+    3. initiate the reprogramming of the FPGA with your gateware bitstream:
+      './update-gateware.sh /etc/LinuxProgramming/'
 
   Wait for a couple of minutes for the BeagleV-Fire to reprogram itself.

board/beagleboard/beaglev_fire/boot.cmd

@@ -12,5 +12,4 @@ bootm loados ${scriptaddr};
 bootm ramdisk;
 bootm prep;
 fdt set /soc/ethernet@20110000 mac-address ${beaglevfire_mac_addr0};
-run design_overlays;
 bootm go;

board/beagleboard/beaglev_fire/patches/linux/linux.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  7bd234a93bc6351d6a830f9ef18e9e780d70c478d280a6513a30bc2f945fb050  linux-linux4microchip+fpga-2024.09.1.tar.gz
+sha256  dcb7b41fd363729675c34545fcb514d5a94dbb3714ee10f527a26ca7716c2579  linux-linux4microchip+fpga-2024.06.tar.gz

board/beagleboard/beaglev_fire/patches/uboot/uboot.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  a2fad7fe7f933fa4679b070e952e1e7a21dbd8b586d7a9a11bfcb99e75ae7ad6  uboot-linux4microchip+fpga-2024.09.tar.gz
+sha256  d461c45a9c5acd019776cdcf8ab2b571315282a880dd6580431f7dd5bfac3889  uboot-linux4microchip+fpga-2024.06.tar.gz

board/beagleboard/beaglev_fire/rootfs-overlay/usr/share/microchip/update-gateware.sh

@@ -1,66 +1,32 @@
 #!/bin/sh
 
-if [ $# -eq 0 ]; then
-    echo "No gateware location provided. Checking default location."
-    if [ ! -e /lib/firmware/mpfs_bitstream.spi ]; then
+if [ ! -e "$1"/mpfs_bitstream.spi ]; then
         echo "No gateware file found."
         exit 1
-    fi
-else
-    echo "Gateware location provided: $1"
-    if [ ! -e "$1"/mpfs_bitstream.spi ]; then
-        echo "No gateware file found."
-        exit 1
-    else
-        if [ ! -d /lib/firmware ]; then
-            mkdir /lib/firmware
-        fi
-        cp "$1"/mpfs_dtbo.spi /lib/firmware/mpfs_dtbo.spi
-        cp "$1"/mpfs_bitstream.spi /lib/firmware/mpfs_bitstream.spi
-    fi
 fi
 
+if [ ! -d /lib/firmware ]
+then
+    mkdir /lib/firmware
+fi
+
+cp "$1"/mpfs_dtbo.spi /lib/firmware/mpfs_dtbo.spi
+cp "$1"/mpfs_bitstream.spi /lib/firmware/mpfs_bitstream.spi
+
+mount -t debugfs none /sys/kernel/debug
+
 # Trash existing device tree overlay in case the rest of the process fails:
-flash_erase /dev/mtd0 0 16
+flash_erase /dev/mtd0 0 1024
 
-# Initiate FPGA update for dtbo
-echo 1 > /sys/class/firmware/mpfs-auto-update/loading
-
-# Write device tree overlay
-cat /lib/firmware/mpfs_dtbo.spi > /sys/class/firmware/mpfs-auto-update/data
-
-# Signal completion for dtbo load
-echo 0 > /sys/class/firmware/mpfs-auto-update/loading
-
-while [ "$(cat /sys/class/firmware/mpfs-auto-update/status)" != "idle" ]; do
-    # Do nothing, just keep checking
-    sleep 1
-done
+# # Write device tree overlay
+dd if=/lib/firmware/mpfs_dtbo.spi of=/dev/mtd0 seek=1024
 
 # Fake the presence of a golden image for now.
-dd if=/dev/zero of=/dev/mtd0 count=1 bs=4
+dd if=/dev/zero of=/dev/mtd0 count=4 bs=1
 
-# Initiate FPGA update for bitstream
-echo 1 > /sys/class/firmware/mpfs-auto-update/loading
+# Initiate FPGA update.
+echo 1 > /sys/kernel/debug/fpga/microchip_exec_update
 
-# Write the firmware image to the data sysfs file
-cat /lib/firmware/mpfs_bitstream.spi > /sys/class/firmware/mpfs-auto-update/data
-
-# Signal completion for bitstream load
-echo 0 > /sys/class/firmware/mpfs-auto-update/loading
-
-while [ "$(cat /sys/class/firmware/mpfs-auto-update/status)" != "idle" ]; do
-    # Do nothing, just keep checking
-    sleep 1
-done
-
-# When the status is 'idle' and no error has occured, reboot the system for
-# the gateware update to take effect. FPGA reprogramming takes places between
-# Linux shut-down and HSS restarting the board.
-if [ "$(cat /sys/class/firmware/mpfs-auto-update/error)" = "" ]; then
-    echo "FPGA update ready. Rebooting."
-    reboot
-else
-    echo "FPGA update failed with status: $(cat /sys/class/firmware/mpfs-auto-update/error)"
-    exit 1
-fi
+# Reboot Linux for the gateware update to take effect.
+# FPGA reprogramming takes places between Linux shut-down and HSS restarting the board.
+reboot

board/bsh/common/imx8mn-bsh-smm-s2/patches/arm-trusted-firmware/arm-trusted-firmware.hash

@@ -0,0 +1,2 @@
+# Locally calculated
+sha256  7efa89e1b4e4106ee05d68e876c8efbb146364d89cfd5d26bf4647b09c08f32b  arm-trusted-firmware-v2.10-git4.tar.gz

board/bsh/common/imx8mn-bsh-smm-s2/patches/linux/linux.hash

@@ -1,2 +1,2 @@
-# From https://cdn.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc
-sha256  d8d95404f8deeb7ff6992c0df855025062e9e8182bca6daa27ef2e9275d27749  linux-6.12.23.tar.xz
+# Locally calculated
+sha256  774698422ee54c5f1e704456f37c65c06b51b4e9a8b0866f34580d86fef8e226  linux-6.10.tar.xz

board/bsh/common/imx8mn-bsh-smm-s2/patches/uboot/uboot.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  439d3bef296effd54130be6a731c5b118be7fddd7fcc663ccbc5fb18294d8718  u-boot-2025.04.tar.bz2
+sha256  f591da9ab90ef3d6b3d173766d0ddff90c4ed7330680897486117df390d83c8f  u-boot-2024.07.tar.bz2

board/bsh/imx6ulz-bsh-smm-m2/nand-full.lst

@@ -25,8 +25,6 @@ SDPV: jump
 
 FB: ucmd setenv fastboot_buffer ${loadaddr}
 FB[-t 60000]: ucmd nand erase.chip
-FB: download -f _image
-FB: ucmd nandbcb init ${fastboot_buffer} nandboot ${filesize}
 FB[-t 60000]: ucmd ubi part rootfs
 FB[-t 60000]: ucmd ubi create root -
 FB: download -f _filesystem

board/bsh/imx6ulz-bsh-smm-m2/patches/linux/linux.hash

@@ -1,2 +1,2 @@
-# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc
-sha256  e8a099182562aecff781de72ce769461e706d97af42d740dff20eb450dd5771e  linux-6.12.28.tar.xz
+# Locally calculated
+sha256  365ff26a30e206de9b18489f45d38582a0a61b7c5919f8ab89295a47316784e1  linux-6.1.68.tar.xz

board/bsh/imx6ulz-bsh-smm-m2/patches/uboot/uboot.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  439d3bef296effd54130be6a731c5b118be7fddd7fcc663ccbc5fb18294d8718  u-boot-2025.04.tar.bz2
+sha256  e00e6c6f014e046101739d08d06f328811cebcf5ae101348f409cbbd55ce6900  u-boot-2023.10.tar.bz2

board/bsh/imx8mn-bsh-smm-s2/nand-full.lst

@@ -10,8 +10,6 @@ SDPS: boot -f _flash.bin
 
 FB: ucmd setenv fastboot_buffer ${loadaddr}
 FB: download -f _image
-FB[-t 10000]: ucmd nand erase.chip
-
 # Burn image to nandfit partition if needed
 FB: ucmd if env exists nandfit_part; then nand erase.part nandfit; nand write ${fastboot_buffer} nandfit ${filesize}; else true; fi;
 FB: ucmd nandbcb init ${fastboot_buffer} nandboot ${filesize}

board/canaan/k210-soc/rootfs_overlay/init

@@ -0,0 +1 @@
+/sbin/init

board/canaan/k210-soc/rootfs_overlay/sbin/init

@@ -11,7 +11,7 @@
 # When the kernel is directly booted, devtmpfs is not automatically mounted.
 # Manually mount it if needed.
 devmnt=$(mount | grep -c devtmpfs)
-if [ "${devmnt}" -eq 0 ]; then
+if [ ${devmnt} -eq 0 ]; then
     /bin/mount -t devtmpfs devtmpfs /dev
 fi
 
@@ -28,5 +28,14 @@ fi
 # Clear memory to reduce page fragmentation
 echo 3 > /proc/sys/vm/drop_caches
 
+# Print a fun logo :)
+echo "          __  _"
+echo "         / / (_) ____   _   _ __  __"
+echo "        / /  | ||  _ \\ | | | |\\ \\/ /"
+echo "       / /___| || | | || |_| | >  < "
+echo "      /_____/|_||_| |_| \\____|/_/\\_\\"
+echo "    64-bits RISC-V Kendryte K210 NOMMU"
+echo ""
+
 # Finally, let's start an interactive shell
 exec /bin/sh

board/cubietech/cubieboard1/patches/linux/linux.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  643142c1b5991560dd12f950825cc19e4497b95b82641918ecff1177f4130c1d  linux-6.12.24.tar.xz
+sha256  19b31956d229b5b9ca5671fa1c74320179682a3d8d00fc86794114b21da86039  linux-6.8.12.tar.xz

board/cubietech/cubieboard1/patches/uboot/uboot.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  439d3bef296effd54130be6a731c5b118be7fddd7fcc663ccbc5fb18294d8718  u-boot-2025.04.tar.bz2
+sha256  18a853fe39fad7ad03a90cc2d4275aeaed6da69735defac3492b80508843dd4a  u-boot-2024.04.tar.bz2

board/cubietech/cubieboard1/rootfs_overlay/boot/extlinux/extlinux.conf

@@ -1,4 +1,5 @@
-label cubieboard-buildroot
-  kernel /boot/zImage
-  devicetree /boot/sun4i-a10-cubieboard.dtb
-  append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p1 rootwait
+DEFAULT linux
+LABEL linux
+  KERNEL /boot/zImage
+  DEVICETREE /boot/sun4i-a10-cubieboard.dtb
+  APPEND console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p1 rootwait

board/cubietech/cubieboard2/boot.cmd

@@ -0,0 +1,5 @@
+setenv fdt_high ffffffff
+setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
+fatload mmc 0 $kernel_addr_r zImage
+fatload mmc 0 $fdt_addr_r sun7i-a20-cubieboard2.dtb
+bootz $kernel_addr_r - $fdt_addr_r

board/cubietech/cubieboard2/genimage.cfg

@@ -1,3 +1,18 @@
+# Minimal SD card image for the Cubieboard2
+# Based in the Orange Pi genimage.cfg
+
+image boot.vfat {
+	vfat {
+		files = {
+			"zImage",
+			"sun7i-a20-cubieboard2.dtb",
+			"boot.scr"
+		}
+	}
+
+	size = 10M
+}
+
 image sdcard.img {
 	hdimage {
 	}
@@ -9,8 +24,15 @@ image sdcard.img {
 		size = 1016K # 1MB - 8KB
 	}
 
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
 	partition rootfs {
 		partition-type = 0x83
 		image = "rootfs.ext4"
+		size = 512M
 	}
 }

board/cubietech/cubieboard2/patches/linux-headers/linux-headers.hash

@@ -1 +0,0 @@
-../linux/linux.hash

board/cubietech/cubieboard2/patches/linux/linux.hash

@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  643142c1b5991560dd12f950825cc19e4497b95b82641918ecff1177f4130c1d  linux-6.12.24.tar.xz

board/cubietech/cubieboard2/patches/uboot/uboot.hash

@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  439d3bef296effd54130be6a731c5b118be7fddd7fcc663ccbc5fb18294d8718  u-boot-2025.04.tar.bz2

board/cubietech/cubieboard2/post-image.sh

@@ -0,0 +1,16 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname $0)"
+GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage                           \
+	--rootpath "${TARGET_DIR}"     \
+	--tmppath "${GENIMAGE_TMP}"    \
+	--inputpath "${BINARIES_DIR}"  \
+	--outputpath "${BINARIES_DIR}" \
+	--config "${GENIMAGE_CFG}"
+
+exit $?

board/cubietech/cubieboard2/rootfs_overlay/boot/extlinux/extlinux.conf

@@ -1,4 +0,0 @@
-label cubieboard-buildroot
-  kernel /boot/zImage
-  devicetree /boot/sun7i-a20-cubieboard2.dtb
-  append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p1 rootwait

board/engicam/px30core/extlinux.conf

@@ -1,4 +0,0 @@
-label Engicam-EDIMM linux
-  kernel /boot/Image
-  devicetree /boot/px30-engicam-px30-core-ctouch2-of10.dtb
-  append earlycon=uart8250,mmio32,0xff160000 root=/dev/mmcblk1p1 rootwait

board/engicam/px30core/genimage.cfg

@@ -1,22 +0,0 @@
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot-tpl-spl-dtb {
-		in-partition-table = "no"
-		image = "idbloader.img"
-		offset = 32K
-	}
-
-	partition u-boot-dtb {
-		in-partition-table = "no"
-		image = "u-boot.itb"
-		offset = 8M
-		size = 30M
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}

board/engicam/px30core/patches/linux-headers/linux-headers.hash

@@ -1 +0,0 @@
-../linux/linux.hash

board/engicam/px30core/patches/linux/linux.hash

@@ -1,2 +0,0 @@
-# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc
-sha256  ab48800ab49985a78d2318ae8ac5f28fd3e123ea17357ef21498105a53337336  linux-6.12.22.tar.xz

board/engicam/px30core/patches/uboot/uboot.hash

@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  439d3bef296effd54130be6a731c5b118be7fddd7fcc663ccbc5fb18294d8718  u-boot-2025.04.tar.bz2

board/engicam/px30core/post-build.sh

@@ -1,5 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname "$0")"
-
-install -m 0644 -D "$BOARD_DIR"/extlinux.conf "$TARGET_DIR"/boot/extlinux/extlinux.conf

board/engicam/px30core/readme.txt

@@ -1,60 +0,0 @@
-ENGICAM PX30-EDIMM2.2 carrier board
-===================================
-
-Build:
-
-  $ make engicam_px30_core_defconfig
-  $ make
-
-Files created in output directory
----------------------------------
-
-output/images
-
-├── bl31.elf
-├── idbloader.img
-├── Image
-├── px30-engicam-px30-core-ctouch2-of10.dtb
-├── rootfs.ext2
-├── rootfs.ext4 -> rootfs.ext2
-├── rootfs.tar
-├── sdcard.img
-├── u-boot.bin
-└── u-boot.itb
-
-How to connect the board and get started:
------------------------------------------
-Ensure that the power supply is stable and provides enough current to handle
-the board's needs, especially when peripherals are connected.
-
-Insert micro SD card on the board micro SD slot J17
-
-Creating bootable SD card:
---------------------------
-sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
-
-/dev/sdX is the path in host via which SD card is detected
-Where X is your SD card device
-
-Connect UART port on the board J26
-
-Serial console
---------------
-Launch minicom at host with 1152008N1
-
-Power on the kit using J4
-
-Refer link on checking board booting
-
-Program eMMC
-------------
-Connect USB otg cable A-type to host pc, Micro USB end to board.
-
-Close Jumper JM5.
-
-Boot the Kit with SD boot.
-
-Program eMMC in U-Boot. (Refer link for the steps)
-
-Wiki link:
-https://wiki.amarulasolutions.com/bsp/rockchip/px30/engicam-px30-edimm2.2.html

board/firefly/roc-rk3399-pc/patches/arm-trusted-firmware/arm-trusted-firmware.hash

@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  c0f23ccc71c49989e9ad238acf334473c17b7c88f79a20c829c3d443e3794a22  arm-trusted-firmware-v2.11-git4.tar.gz

board/firefly/roc-rk3399-pc/patches/linux-headers/linux-headers.hash

@@ -1 +0,0 @@
-../linux/linux.hash

board/firefly/roc-rk3399-pc/patches/linux/linux.hash

@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  f74812f78e88992c416434cb107639e13a551dbaff36bb90d6346ab16ab71a95  linux-6.6.56.tar.xz

board/freescale/common/imx/imx9-bootloader-prepare.sh

@@ -18,19 +18,19 @@ main ()
 
 	if grep -Eq "^BR2_TARGET_OPTEE_OS=y$" "${BR2_CONFIG}"; then
 		"${HOST_DIR}/bin/mkimage_imx8" -soc IMX9 -c \
-			-ap "${BINARIES_DIR}/bl31.bin" a55 ${ATF_LOAD_ADDR} \
-			-ap "${BINARIES_DIR}/u-boot-hash.bin" a55 0x80200000 \
-			-ap "${BINARIES_DIR}/tee.bin" a55 0x96000000 \
+			-ap "${BINARIES_DIR}/bl31.bin" a35 ${ATF_LOAD_ADDR} \
+			-ap "${BINARIES_DIR}/u-boot-hash.bin" a35 0x80200000 \
+			-ap "${BINARIES_DIR}/tee.bin" a35 0x96000000 \
 			-out "${BINARIES_DIR}/u-boot-atf-container.img"
 	else
 		"${HOST_DIR}/bin/mkimage_imx8" -soc IMX9 -c \
-			-ap "${BINARIES_DIR}/bl31.bin" a55 ${ATF_LOAD_ADDR} \
-			-ap "${BINARIES_DIR}/u-boot-hash.bin" a55 0x80200000 \
+			-ap "${BINARIES_DIR}/bl31.bin" a35 ${ATF_LOAD_ADDR} \
+			-ap "${BINARIES_DIR}/u-boot-hash.bin" a35 0x80200000 \
 			-out "${BINARIES_DIR}/u-boot-atf-container.img"
 	fi
 
 	"${HOST_DIR}/bin/mkimage_imx8" -soc IMX9 -append "${BINARIES_DIR}/ahab-container.img" -c \
-		-ap "${BINARIES_DIR}/u-boot-spl-ddr.bin" a55 ${SPL_LOAD_ADDR} \
+		-ap "${BINARIES_DIR}/u-boot-spl-ddr.bin" a35 ${SPL_LOAD_ADDR} \
 		-out "${BINARIES_DIR}/imx9-boot-sd.bin"
 
 	flashbin_size="$(wc -c "${BINARIES_DIR}/imx9-boot-sd.bin" | awk '{print $1}')"

board/freescale/imx28evk/patches/linux-headers/linux-headers.hash

@@ -1 +0,0 @@
-../linux/linux.hash

board/freescale/imx28evk/patches/linux/linux.hash

@@ -1,2 +0,0 @@
-# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc
-sha256  af54b449f4fb93b8e8daa346144a7309e8e95174bd962c4b5917cf56120456d9  linux-6.6.26.tar.xz

board/freescale/imx28evk/patches/uboot/uboot.hash

@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  18a853fe39fad7ad03a90cc2d4275aeaed6da69735defac3492b80508843dd4a  u-boot-2024.04.tar.bz2

board/freescale/imx28evk/readme.txt

@@ -12,7 +12,7 @@ Build
 
 First, configure Buildroot for your i.MX28 EVK board:
 
-  make imx28evk_defconfig
+  make freescale_imx28evk_defconfig
 
 Build all components:
 

board/freescale/imx6sabre/patches/linux/linux.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  4c1147a9bbe4bf36fbcbd8b1e6b0d73ec0da3c454821c58a61d32d3879afc146  linux-imx-lf-6.12.3-1.0.0.tar.gz
+sha256  c70adedadce88f8685cb26d9703b930292c1349138e2c55ed9b4cd6e277de3bd  linux-imx-lf-6.6.23-2.0.0.tar.gz

board/freescale/imx6sabre/patches/uboot/uboot.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  18a32d6c79538e4f90746674873b196f9c48be24caef0ab5c1bec920a1816825  uboot-imx-lf-6.12.3-1.0.0.tar.gz
+sha256  179b6531ef1d4ce681d139741ac7b4144220c90b7223297df28b61e98e8d37fc  uboot-imx-lf-6.6.23-2.0.0.tar.gz

board/freescale/imx6ullevk/patches/linux/linux.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  4c1147a9bbe4bf36fbcbd8b1e6b0d73ec0da3c454821c58a61d32d3879afc146  linux-imx-lf-6.12.3-1.0.0.tar.gz
+sha256  c70adedadce88f8685cb26d9703b930292c1349138e2c55ed9b4cd6e277de3bd  linux-imx-lf-6.6.23-2.0.0.tar.gz

board/freescale/imx6ullevk/patches/uboot/uboot.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  18a32d6c79538e4f90746674873b196f9c48be24caef0ab5c1bec920a1816825  uboot-imx-lf-6.12.3-1.0.0.tar.gz
+sha256  179b6531ef1d4ce681d139741ac7b4144220c90b7223297df28b61e98e8d37fc  uboot-imx-lf-6.6.23-2.0.0.tar.gz

board/freescale/imx7dsdb/patches/linux/linux.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  4c1147a9bbe4bf36fbcbd8b1e6b0d73ec0da3c454821c58a61d32d3879afc146  linux-imx-lf-6.12.3-1.0.0.tar.gz
+sha256  c70adedadce88f8685cb26d9703b930292c1349138e2c55ed9b4cd6e277de3bd  linux-imx-lf-6.6.23-2.0.0.tar.gz

board/freescale/imx7dsdb/patches/uboot/uboot.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  18a32d6c79538e4f90746674873b196f9c48be24caef0ab5c1bec920a1816825  uboot-imx-lf-6.12.3-1.0.0.tar.gz
+sha256  179b6531ef1d4ce681d139741ac7b4144220c90b7223297df28b61e98e8d37fc  uboot-imx-lf-6.6.23-2.0.0.tar.gz

board/freescale/imx8dxlevk/patches/arm-trusted-firmware/arm-trusted-firmware.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  a696ee1c75140cd5ddb9d4349c921952f80e2a8a21bc6bd92f905959a6b1798f  imx-atf-lf-6.12.3-1.0.0.tar.gz
+sha256  37f0dee8b3b52d6c7f8a46c3bdd4138b528f9cc607015400e7cad0c206df41d7  imx-atf-lf-6.6.23-2.0.0.tar.gz

board/freescale/imx8dxlevk/patches/linux/linux.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  4c1147a9bbe4bf36fbcbd8b1e6b0d73ec0da3c454821c58a61d32d3879afc146  linux-imx-lf-6.12.3-1.0.0.tar.gz
+sha256  c70adedadce88f8685cb26d9703b930292c1349138e2c55ed9b4cd6e277de3bd  linux-imx-lf-6.6.23-2.0.0.tar.gz

board/freescale/imx8dxlevk/patches/uboot/uboot.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  18a32d6c79538e4f90746674873b196f9c48be24caef0ab5c1bec920a1816825  uboot-imx-lf-6.12.3-1.0.0.tar.gz
+sha256  179b6531ef1d4ce681d139741ac7b4144220c90b7223297df28b61e98e8d37fc  uboot-imx-lf-6.6.23-2.0.0.tar.gz

board/freescale/imx8mm-evk/extlinux.conf.in

@@ -1,4 +0,0 @@
-label buildroot
-  kernel /boot/Image
-  devicetree /boot/freescale/imx8mm-evk.dtb
-  append root=PARTUUID=%PARTUUID% rootwait rw

board/freescale/imx8mm-evk/genimage.cfg.in

@@ -1,17 +0,0 @@
-image sdcard.img {
-	hdimage {
-		partition-table-type = "gpt"
-	}
-
-	partition imx-boot {
-		in-partition-table = "no"
-		image = "flash.bin"
-		offset = 33K
-	}
-
-	partition rootfs {
-		offset = 8M
-		image = "rootfs.ext4"
-		partition-uuid = %PARTUUID%
-	}
-}

board/freescale/imx8mm-evk/patches/arm-trusted-firmware/arm-trusted-firmware.hash

@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  06b35a3596b8417bf66f7bfdd7acd181bcb53fc36dc13216227b5cae154e0219  arm-trusted-firmware-v2.12-git4.tar.gz

board/freescale/imx8mm-evk/patches/linux-headers/linux-headers.hash

@@ -1 +0,0 @@
-../linux/linux.hash

board/freescale/imx8mm-evk/patches/linux/linux.hash

@@ -1,2 +0,0 @@
-# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc
-sha256  5f81362a694f51520bff9faecb73f1cc9bc7bece6fdd10d5c27e348df39d7dc4  linux-6.12.16.tar.xz

board/freescale/imx8mm-evk/patches/uboot/uboot.hash

@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  cdef7d507c93f1bbd9f015ea9bc21fa074268481405501945abc6f854d5b686f  u-boot-2025.01.tar.bz2

board/freescale/imx8mm-evk/post-build.sh

@@ -1,7 +0,0 @@
-#!/bin/sh
-BOARD_DIR="$(dirname "$0")"
-PARTUUID="$("$HOST_DIR"/bin/uuidgen)"
-
-install -d "$TARGET_DIR/boot/extlinux/"
-sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/extlinux.conf.in" > "$TARGET_DIR/boot/extlinux/extlinux.conf"
-sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/genimage.cfg.in" > "$BINARIES_DIR/genimage.cfg"

board/freescale/imx8mm-evk/readme.txt

@@ -1,31 +0,0 @@
-NXP i.MX8MM EVK
-===============
-
-This is a Buildroot target for building an image for the imx8mm-evk
-board using upstream components: TF-A, U-Boot and kernel.
-
-How to build it
-===============
-
-Configure Buildroot and build it:
-
-  $ make imx8mm-evk_defconfig
-  $ make
-
-Flashing the SD card image
-==========================
-
-Copy the sdcard.img file into the SD card:
-
-  $ sudo dd if=output/images/sdcard.img of=<your-sd-device>; sync
-
-
-Booting the board
-=================
-
-To boot your newly created system:
-
-- Insert the SD card in the MicroSD slot of the board.
-- Connect a serial to USB cable to the DEBUG port.
-- Open a terminal on the ttyUSB1 port. For example: sudo picocom -b 115200 /dev/ttyUSB1
-- Power on the board.

board/freescale/imx8mmevk/patches/arm-trusted-firmware/arm-trusted-firmware.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  a696ee1c75140cd5ddb9d4349c921952f80e2a8a21bc6bd92f905959a6b1798f  imx-atf-lf-6.12.3-1.0.0.tar.gz
+sha256  37f0dee8b3b52d6c7f8a46c3bdd4138b528f9cc607015400e7cad0c206df41d7  imx-atf-lf-6.6.23-2.0.0.tar.gz

board/freescale/imx8mmevk/patches/linux/linux.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  4c1147a9bbe4bf36fbcbd8b1e6b0d73ec0da3c454821c58a61d32d3879afc146  linux-imx-lf-6.12.3-1.0.0.tar.gz
+sha256  c70adedadce88f8685cb26d9703b930292c1349138e2c55ed9b4cd6e277de3bd  linux-imx-lf-6.6.23-2.0.0.tar.gz

board/freescale/imx8mmevk/patches/uboot/uboot.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  18a32d6c79538e4f90746674873b196f9c48be24caef0ab5c1bec920a1816825  uboot-imx-lf-6.12.3-1.0.0.tar.gz
+sha256  179b6531ef1d4ce681d139741ac7b4144220c90b7223297df28b61e98e8d37fc  uboot-imx-lf-6.6.23-2.0.0.tar.gz

board/freescale/imx8mn-evk/extlinux.conf.in

@@ -1,4 +0,0 @@
-label buildroot
-  kernel /boot/Image
-  devicetree /boot/freescale/imx8mn-ddr4-evk.dtb
-  append root=PARTUUID=%PARTUUID% rootwait rw

board/freescale/imx8mn-evk/genimage.cfg.in

@@ -1,17 +0,0 @@
-image sdcard.img {
-	hdimage {
-		partition-table-type = "gpt"
-	}
-
-	partition imx-boot {
-		in-partition-table = "no"
-		image = "flash.bin"
-		offset = 32K
-	}
-
-	partition rootfs {
-		offset = 8M
-		image = "rootfs.ext4"
-		partition-uuid = %PARTUUID%
-	}
-}

board/freescale/imx8mn-evk/patches/arm-trusted-firmware/arm-trusted-firmware.hash

@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  06b35a3596b8417bf66f7bfdd7acd181bcb53fc36dc13216227b5cae154e0219  arm-trusted-firmware-v2.12-git4.tar.gz

board/freescale/imx8mn-evk/patches/linux-headers/linux-headers.hash

@@ -1 +0,0 @@
-../linux/linux.hash

board/freescale/imx8mn-evk/patches/linux/linux.hash

@@ -1,2 +0,0 @@
-# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc
-sha256  5f81362a694f51520bff9faecb73f1cc9bc7bece6fdd10d5c27e348df39d7dc4  linux-6.12.16.tar.xz

board/freescale/imx8mn-evk/patches/uboot/uboot.hash

@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  cdef7d507c93f1bbd9f015ea9bc21fa074268481405501945abc6f854d5b686f  u-boot-2025.01.tar.bz2

board/freescale/imx8mn-evk/post-build.sh

@@ -1,7 +0,0 @@
-#!/bin/sh
-BOARD_DIR="$(dirname "$0")"
-PARTUUID="$("$HOST_DIR"/bin/uuidgen)"
-
-install -d "$TARGET_DIR/boot/extlinux/"
-sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/extlinux.conf.in" > "$TARGET_DIR/boot/extlinux/extlinux.conf"
-sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/genimage.cfg.in" > "$BINARIES_DIR/genimage.cfg"

board/freescale/imx8mn-evk/readme.txt

@@ -1,31 +0,0 @@
-NXP i.MX8MN DDR4 EVK
-====================
-
-This is a Buildroot target for building an image for the imx8mn-ddr4-evk
-board using upstream components: TF-A, U-Boot and kernel.
-
-How to build it
-===============
-
-Configure Buildroot and build it:
-
-  $ make imx8mn-ddr4-evk_defconfig
-  $ make
-
-Flashing the SD card image
-==========================
-
-Copy the sdcard.img file into the SD card:
-
-  $ sudo dd if=output/images/sdcard.img of=<your-sd-device>; sync
-
-
-Booting the board
-=================
-
-To boot your newly created system:
-
-- Insert the SD card in the MicroSD slot of the board.
-- Connect a serial to USB cable to the DEBUG port.
-- Open a terminal on ttyUSB2 port. For example: sudo picocom -b 115200 /dev/ttyUSB1
-- Power on the board.