Update for 2024.08.1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
package/libcurl: fix build failure with verbose disabled
2024-10-20 15:41:51 +02:00 · 2024-10-20 14:12:32 +02:00 · 2024-10-19 22:13:21 +02:00 · 2024-10-19 22:11:43 +02:00 · 2024-10-19 22:10:23 +02:00 · 2024-10-19 22:07:38 +02:00
2261 changed files with 29685 additions and 17713 deletions
@@ -1,3 +1,4 @@
+board/aarch64-efi/post-image.sh Shellcheck
 board/amarula/vyasa/post-build.sh Shellcheck
 board/andes/ae350/patches/uboot/0001-mmc-ftsdc010_mci-Support-DTS-of-ftsdc010-driver-for-.patch lib_patch.Upstream
 board/andes/ae350/patches/uboot/0002-spl-Align-device-tree-blob-address-at-8-byte-boundar.patch lib_patch.Upstream
@@ -21,6 +22,7 @@ board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh Shellcheck
 board/bsh/imx8mn-bsh-smm-s2/flash.sh Shellcheck lib_shellscript.EmptyLastLine
 board/bsh/imx8mn-bsh-smm-s2/post-build.sh Shellcheck
 board/canaan/k210-soc/post-build.sh Shellcheck
+board/canaan/k210-soc/rootfs_overlay/sbin/init Shellcheck
 board/chromebook/elm/sign.sh Shellcheck
 board/chromebook/mksd.sh Shellcheck
 board/chromebook/snow/sign.sh Shellcheck
@@ -43,6 +45,7 @@ board/lego/ev3/post-image.sh Shellcheck
 board/lemaker/bananapro/patches/linux/0001-arch-arm-boot-dts-sun7i-a20-bananapro.dts-disable-00.patch lib_patch.Upstream
 board/lemaker/bananapro/post-build.sh Shellcheck
 board/lemaker/bananapro/post-image.sh Shellcheck
+board/mender/x86_64/post-image-efi.sh lib_shellscript.ConsecutiveEmptyLines
 board/minnowboard/post-build.sh Shellcheck
 board/nexbox/a95x/post-build.sh Shellcheck
 board/nexbox/a95x/post-image.sh Shellcheck
@@ -63,6 +66,7 @@ board/orangepi/orangepi-zero/patches/linux/0003-ARM-dts-orange-pi-zero-enable-sp
 board/orangepi/orangepi-zero/patches/linux/0004-ARM-dts-orange-pi-zero-enable-uart.patch lib_patch.Upstream
 board/pine64/rock64/patches/uboot/0001-Makefile-rk3328-needs-itb-image-to-boot-properly.patch lib_patch.Upstream
 board/pine64/rock64/post-build.sh Shellcheck
+board/pine64/rockpro64/post-build.sh Shellcheck
 board/qemu/aarch64-sbsa/assemble-flash-images Shellcheck
 board/qemu/x86/post-build.sh Shellcheck
 board/qemu/x86_64/post-build.sh Shellcheck
@@ -78,14 +82,16 @@ board/solidrun/clearfog/post-build.sh Shellcheck
 board/solidrun/macchiatobin/post-build-mainline.sh Shellcheck
 board/solidrun/macchiatobin/post-build.sh Shellcheck
 board/stmicroelectronics/common/stm32f4xx/stm32-post-build.sh Shellcheck
-board/stmicroelectronics/common/stm32mp1xx/post-image.sh Shellcheck
+board/stmicroelectronics/common/stm32mp157/post-image.sh Shellcheck
 board/stmicroelectronics/stm32f429-disco/flash.sh Shellcheck
 board/stmicroelectronics/stm32f469-disco/flash_sd.sh Shellcheck
 board/stmicroelectronics/stm32f469-disco/flash_xip.sh Shellcheck
+board/stmicroelectronics/stm32f469-disco/post-build.sh Shellcheck
 board/synopsys/axs10x/post-build.sh Shellcheck
 board/technologic/ts4900/post-image.sh Shellcheck
 board/toradex/apalis-imx6/post-image.sh Shellcheck
 board/udoo/common/post-build.sh Shellcheck
+board/udoo/mx6qdl/patches/linux/0000-udoo-disable-usbh1.patch lib_patch.Upstream
 boot/afboot-stm32/0003-Makefile-disable-stack-protector.patch lib_patch.Upstream
 boot/optee-os/3.13.0/0001-core-zlib-fix-build-warning-when-_LFS64_LARGEFILE-is.patch lib_patch.Upstream
 boot/syslinux/0001-bios-Fix-alignment-change-with-gcc-5.patch lib_patch.Upstream
@@ -102,6 +108,7 @@ boot/syslinux/0013-Fix-build-with-gnu-efi-version-3.0.9.patch lib_patch.Upstream
 boot/syslinux/0014-Fix-build-with-binutils-note-gnu-property-section.patch lib_patch.Upstream
 boot/syslinux/0016-Workaround-multiple-definition-of-symbol-errors.patch lib_patch.Upstream
 boot/syslinux/0017-Replace-builtin-strlen-that-appears-to-get-optimized.patch lib_patch.Upstream
+configs/aarch64_efi_defconfig lib_defconfig.ForceCheckHash
 configs/am574x_idk_defconfig lib_defconfig.ForceCheckHash
 configs/andes_ae350_45_defconfig lib_defconfig.ForceCheckHash
 configs/arcturus_ucls1012a_defconfig lib_defconfig.ForceCheckHash
@@ -153,6 +160,7 @@ configs/globalscale_espressobin_defconfig lib_defconfig.ForceCheckHash
 configs/grinn_chiliboard_defconfig lib_defconfig.ForceCheckHash
 configs/grinn_liteboard_defconfig lib_defconfig.ForceCheckHash
 configs/hifive_unleashed_defconfig lib_defconfig.ForceCheckHash
+configs/icnova-a20-adb4006_defconfig lib_defconfig.ForceCheckHash
 configs/imx23evk_defconfig lib_defconfig.ForceCheckHash
 configs/imx6-sabreauto_defconfig lib_defconfig.ForceCheckHash
 configs/imx6-sabresd_defconfig lib_defconfig.ForceCheckHash
@@ -171,6 +179,7 @@ configs/kontron_bl_imx8mm_defconfig lib_defconfig.ForceCheckHash
 configs/kontron_pitx_imx8m_defconfig lib_defconfig.ForceCheckHash
 configs/kontron_smarc_sal28_defconfig lib_defconfig.ForceCheckHash
 configs/linksprite_pcduino_defconfig lib_defconfig.ForceCheckHash
+configs/ls1046a-frwy_defconfig lib_defconfig.ForceCheckHash
 configs/mangopi_mq1rdw2_defconfig lib_defconfig.ForceCheckHash
 configs/mender_x86_64_efi_defconfig lib_defconfig.ForceCheckHash
 configs/microchip_sam9x60ek_mmc_defconfig lib_defconfig.ForceCheckHash
@@ -223,6 +232,7 @@ configs/riotboard_defconfig lib_defconfig.ForceCheckHash
 configs/roc_pc_rk3399_defconfig lib_defconfig.ForceCheckHash
 configs/rock64_defconfig lib_defconfig.ForceCheckHash
 configs/rock_pi_n8_defconfig lib_defconfig.ForceCheckHash
+configs/rockpro64_defconfig lib_defconfig.ForceCheckHash
 configs/roseapplepi_defconfig lib_defconfig.ForceCheckHash
 configs/s6lx9_microboard_defconfig lib_defconfig.ForceCheckHash
 configs/sipeed_lichee_rv_defconfig lib_defconfig.ForceCheckHash
@@ -243,6 +253,7 @@ configs/snps_archs38_axs103_defconfig lib_defconfig.ForceCheckHash
 configs/snps_archs38_haps_defconfig lib_defconfig.ForceCheckHash
 configs/snps_archs38_hsdk_defconfig lib_defconfig.ForceCheckHash
 configs/socrates_cyclone5_defconfig lib_defconfig.ForceCheckHash
+configs/solidrun_clearfog_defconfig lib_defconfig.ForceCheckHash
 configs/solidrun_clearfog_gt_8k_defconfig lib_defconfig.ForceCheckHash
 configs/solidrun_macchiatobin_defconfig lib_defconfig.ForceCheckHash
 configs/stm32mp157c_odyssey_defconfig lib_defconfig.ForceCheckHash
@@ -271,11 +282,12 @@ package/am33x-cm3/0004-Makefile-add-fno-builtin.patch lib_patch.Upstream
 package/am33x-cm3/S93-am335x-pm-firmware-load lib_sysv.Variables
 package/android-tools/0001-Fix-makefiles-for-out-of-tree-build.patch lib_patch.Upstream
 package/android-tools/0002-Fix-adbd-for-non-Ubuntu-systems.patch lib_patch.Upstream
+package/android-tools/0003-Fix-build-issue-with-uclibc.patch lib_patch.Upstream
 package/android-tools/0004-Fix-build-issue-with-musl.patch lib_patch.Upstream
-package/android-tools/0005-makefiles-use-pkgconf-to-get-libs-deps.patch lib_patch.Upstream
-package/android-tools/0006-Fix-build-on-big-endian-systems.patch lib_patch.Upstream
-package/android-tools/0007-Include-cdefs.h-wherever-it-is-needed.patch lib_patch.Upstream
-package/android-tools/0008-usb_linux.c-fix-minor-major-build-failure-due-to-gli.patch lib_patch.Upstream
+package/android-tools/0005-Use-pkgconf-to-get-libs-deps.patch lib_patch.Upstream
+package/android-tools/0006-fix-big-endian-build.patch lib_patch.Upstream
+package/android-tools/0007-include-cdefs-h-when-needed.patch lib_patch.Upstream
+package/android-tools/0008-Include-sysmacros.h-to-compile-with-glibc-2.28.patch lib_patch.Sob lib_patch.Upstream
 package/android-tools/0009-Fix-makefiles-for-out-of-tree-ext4_utils-build.patch lib_patch.Upstream
 package/android-tools/0010-adb-added-patch-for-openssl-1.1.0-compatibility.patch lib_patch.Upstream
 package/aoetools/0001-Change-shell-script-interpreter-from-bin-bash-to-bin.patch lib_patch.Upstream
@@ -334,6 +346,7 @@ package/brickd/S70brickd Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/bridge-utils/0001-fix-build-on-musl.patch lib_patch.Upstream
 package/brltty/0001-Fix-linking-error-on-mips64el.patch lib_patch.Upstream
 package/brltty/S10brltty Shellcheck lib_sysv.Indent lib_sysv.Variables
+package/bsdiff/0001-Add-missing-header-for-u_char.patch lib_patch.Upstream
 package/bustle/0001-Makefile-fix-pcap-config-call.patch lib_patch.Upstream
 package/busybox/0001-networking-libiproute-use-linux-if_packet.h-instead-.patch lib_patch.Upstream
 package/busybox/0002-Makefile.flags-strip-non-l-arguments-returned-by-pkg.patch lib_patch.Upstream
@@ -358,7 +371,7 @@ package/cfm/S65cfm lib_sysv.Indent lib_sysv.Variables
 package/cgroupfs-mount/S30cgroupfs Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/chipmunk/0001-Fix-build-failure-on-musl.patch lib_patch.Upstream
 package/chocolate-doom/0001-Remove-redundant-demoextend-definition.patch lib_patch.Upstream
-package/chrony/S49chronyd lib_sysv.Variables
+package/chrony/S49chrony Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/cmake/0001-rename-cmake-rootfile.patch lib_patch.Upstream
 package/cmocka/0001-Don-t-redefine-uintptr_t.patch lib_patch.Upstream
 package/collectd/0001-src-netlink.c-remove-REG_NOERROR.patch lib_patch.Upstream
@@ -424,6 +437,7 @@ package/dmalloc/0004-Makefile-use-the-configure-detected-or-user-supplied.patch
 package/dmalloc/0005-configure-use-LD-instead-of-hard-coding-ld.patch lib_patch.Upstream
 package/dmraid/0001-fix-compilation-under-musl.patch lib_patch.Upstream
 package/dmraid/S20dmraid lib_sysv.Variables
+package/docker-engine/S60dockerd Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/docopt-cpp/0001-only-build-one-target-use-BUILD_SHARED_LIBS-where-appropriate.patch lib_patch.Upstream
 package/domoticz/S99domoticz Shellcheck
 package/dovecot/0001-auth-Fix-handling-passdbs-with-identical-driver-args.patch lib_patch.Upstream
@@ -441,6 +455,8 @@ package/dvdrw-tools/0002-Include-sysmacros.h-to-compile-with-newer-gcc.patch lib
 package/earlyoom/0001-main.c-fix-build-with-kernel-4.3.patch lib_patch.Upstream
 package/earlyoom/S02earlyoom Shellcheck lib_sysv.Indent
 package/ebtables/0001-replace-ebtables-save-perl-script-with-bash.patch lib_patch.Upstream
+package/ebtables/0002-ebtables.h-restore-KERNEL_64_USERSPACE_32-checks.patch lib_patch.Upstream
+package/ebtables/0003-configure.ac-add-option-enable-kernel-64-userland-32.patch lib_patch.Upstream
 package/ecryptfs-utils/0001-musl.patch lib_patch.Upstream
 package/ecryptfs-utils/0002-openssl110.patch lib_patch.Upstream
 package/ecryptfs-utils/0003-fix-parallel-build-issue.patch lib_patch.Upstream
@@ -448,10 +464,17 @@ package/efl/0001-ecore_evas-engines-drm-meson.build-use-gl_deps-as-en.patch lib_
 package/efl/0002-ecore_evas-engines-drm-meson.build-fix-gl_drm-includ.patch lib_patch.Upstream
 package/efl/0003-ecore_fb-fix-build-with-tslib.patch lib_patch.Upstream
 package/eigen/0001-Adds-new-CMake-Options-for-controlling-build-compone.patch lib_patch.Upstream
+package/ejabberd/0001-Makefile.in-do-not-download-or-compile-dependencies.patch lib_patch.Upstream
+package/ejabberd/0002-fix-ejabberdctl.patch lib_patch.Upstream
+package/ejabberd/0003-correct-includes.patch lib_patch.Upstream
+package/ejabberd/S50ejabberd Shellcheck lib_sysv.Indent lib_sysv.Variables
+package/ejabberd/check-erlang-lib Shellcheck
 package/elftosb/0001-fixes-includes.patch lib_patch.Upstream
 package/elftosb/0002-force-cxx-compiler.patch lib_patch.Upstream
 package/elfutils/0001-Add-a-enable-disable-progs-configure-option.patch lib_patch.Upstream
 package/elfutils/0002-Really-make-Werror-conditional-to-BUILD_WERROR.patch lib_patch.Upstream
+package/erlang-p1-sip/0001-correct-include.patch lib_patch.Upstream
+package/erlang-p1-xmpp/0001-fix-includes.patch lib_patch.Upstream
 package/erlang-rebar/0001-src-rebar_port_compiler-add-fPIC-to-LDFLAGS-by-defau.patch lib_patch.Upstream
 package/espeak/0001-Fix-build-of-shared-library-on-architectures-needing.patch lib_patch.Upstream
 package/espeak/0002-tr_languages-cast-string_ordinal-init-values.patch lib_patch.Upstream
@@ -475,6 +498,13 @@ package/fbterm/0001-fbio.cpp-improxy.cpp-fbterm.cpp-fix-musl-compile.patch lib_p
 package/fbterm/0002-mouse.cpp-fix-musl-compile.patch lib_patch.Upstream
 package/fbterm/0003-C++11-compliance.patch lib_patch.Upstream
 package/fbterm/0004-iconv.patch lib_patch.Upstream
+package/fbv/0001-cross.patch lib_patch.Sob lib_patch.Upstream
+package/fbv/0002-fix-24bpp-support-on-big-endian.patch lib_patch.Sob lib_patch.Upstream
+package/fbv/0003-fix-bgr555.patch lib_patch.Upstream
+package/fbv/0004-giflib.patch lib_patch.Upstream
+package/fbv/0005-include.patch lib_patch.Sob lib_patch.Upstream
+package/fbv/0006-libpng15.patch lib_patch.Upstream
+package/fbv/0007-gif.c-fic-build-with-gcc-10.patch lib_patch.Upstream
 package/fcgiwrap/0001-use-LIBS-from-configure.patch lib_patch.Upstream
 package/fcgiwrap/0002-link-with-libsystemd-instead-of-libsystemd-daemon.patch lib_patch.Upstream
 package/ffmpeg/0001-swscale-x86-yuv2rgb-Fix-build-without-SSSE3.patch lib_patch.Upstream
@@ -553,6 +583,7 @@ package/go/go-src/0001-build.go-explicit-option-for-crosscompilation.patch lib_p
 package/gob2/0001-dont-include-from-prefix.patch lib_patch.Upstream
 package/gobject-introspection/0001-disable-tests.patch lib_patch.Upstream
 package/gobject-introspection/0002-Add-rpath-links-to-ccompiler.patch lib_patch.Upstream
+package/gobject-introspection/0003-giscanner-ignore-error-return-codes-from-ldd-wrapper.patch lib_patch.Upstream
 package/gpsd/S50gpsd Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/gptfdisk/0001-gptcurses-partially-revert-Tweaks-for-building-on-th.patch lib_patch.Upstream
 package/graphite2/0001-don-t-install-a-libtool-file-with-static-library.patch lib_patch.Upstream
@@ -572,6 +603,8 @@ package/heirloom-mailx/0001-fix-libressl-support.patch lib_patch.Upstream
 package/hplip/0001-build-use-pkg-config-to-discover-libusb.patch lib_patch.Upstream
 package/hplip/0002-configure.in-fix-AM_INIT_AUTOMAKE-call.patch lib_patch.Upstream
 package/htpdate/S43htpdate Shellcheck
+package/httping/0001-fix-math-library-linking.patch lib_patch.Upstream
+package/httping/0002-Makefile-allow-build-without-gettext.patch lib_patch.Upstream
 package/i2pd/S99i2pd Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/i7z/0001-fix-build-with-gcc-10.patch lib_patch.Upstream
 package/ibm-sw-tpm2/0001-Use-LONG_BIT-to-define-RADIX_BITS.patch lib_patch.Upstream
@@ -678,6 +711,7 @@ package/libftdi1/0003-CMakeLists.txt-fix-static-build-with-libusb-and-lato.patch
 package/libfuse/0001-fix-aarch64-build.patch lib_patch.Upstream
 package/libfuse/0002-util-ulockmgr_server-c-conditionally-define-closefrom-fix-glibc-2-34.patch lib_patch.Upstream
 package/libgcrypt/0001-configure.ac-add-an-option-to-disable-tests.patch lib_patch.Upstream
+package/libglfw/0001-Wayland-Remove-extra-cmake-modules-dependency.patch lib_patch.Upstream
 package/libgpiod/0001-build-add-a-configure-switch-for-building-examples.patch lib_patch.Upstream
 package/libgsm/0001-Misc-fixes-from-Archlinux.patch lib_patch.Upstream
 package/libgtk2/0001-reduce-dependencies.patch lib_patch.Upstream
@@ -824,6 +858,7 @@ package/lugaru/0001-ImageIO-fix-invalid-conversion.patch lib_patch.Upstream
 package/lugaru/0002-Fix-mismatched-usage-length-build-fail-on-g.patch lib_patch.Upstream
 package/lvm2/0001-cmdline-use-freopen-to-reopen-standard-streams.patch lib_patch.Upstream
 package/lvm2/0002-log-use-freopen-to-reopen-standard-streams.patch lib_patch.Upstream
+package/lz4/0001-build-Support-BUILD_SHARED-no.patch lib_patch.Upstream
 package/lzma/0001-Remove-static-from-LDFLAGS.patch lib_patch.Upstream
 package/lzop/0001-allow-overriding-modification-time.patch lib_patch.Upstream
 package/macchanger/0001-Fix-missing-include-for-caddr_t.patch lib_patch.Upstream
@@ -935,6 +970,7 @@ package/nss-pam-ldapd/S45nslcd Shellcheck lib_sysv.EmptyLastLine lib_sysv.Indent
 package/ntp/0001-ntp-syscalls-fallback.patch lib_patch.Upstream
 package/ntp/S49ntp.in lib_sysv.Variables
 package/ntpsec/0001-wscript-remove-checks-for-bsd-string.h-fixes-host-co.patch lib_patch.Upstream
+package/numactl/0001-link-with-latomic-if-needed-again.patch lib_patch.Upstream
 package/nuttcp/0001-susv3-legacy.patch lib_patch.Upstream
 package/nvidia-driver/0001-use-LDFLAGS.patch lib_patch.Upstream
 package/octave/0001-Fix-BLAS-library-integer-size-detection.patch lib_patch.Upstream
@@ -1022,6 +1058,7 @@ package/pistache/0001-src-common-transport.cc-fallback-value-for-RUSAGE_TH.patch
 package/pistache/0002-src-server-listener.cc-fix-libressl-build.patch lib_patch.Upstream
 package/pixman/0001-Disable-tests.patch lib_patch.Upstream
 package/pkgconf/0001-Only-prefix-with-the-sysroot-a-subset-of-variables.patch lib_patch.Upstream
+package/pkgconf/0002-Revert-main-assume-modversion-insted-of-version-if-o.patch lib_patch.Upstream
 package/pkgconf/pkg-config.in Shellcheck
 package/poke/0001-configure.ac-HELP2MAN-replace-by-true-when-cross-com.patch lib_patch.Upstream
 package/policycoreutils/0001-Add-DESTDIR-to-all-paths-that-use-an-absolute-path.patch lib_patch.Upstream
@@ -1048,6 +1085,9 @@ package/pulseaudio/0001-shm.c-use-_Static_assert-instead-of-static_assert-fo.pat
 package/pulseaudio/S50pulseaudio lib_sysv.ConsecutiveEmptyLines lib_sysv.EmptyLastLine lib_sysv.Indent lib_sysv.Variables
 package/pulseview/0001-Replace-obsolete-deprecated-Qt-methods.patch lib_patch.Upstream
 package/pulseview/0002-Fix-broken-build-due-to-C-template-behind-C-linkage.patch lib_patch.Upstream
+package/python-aiohttp-remotes/0001-Fix-flit_core-build-requires-backend.patch lib_patch.Upstream
+package/python-automat/0001-Remove-uneeded-dependency-to-wheel.patch lib_patch.Upstream
+package/python-daphne/0001-remove-pytest-runner-requirement.patch lib_patch.Upstream
 package/python-pybind/0001-pybind11-commands.py-support-STAGING_DIR.patch lib_patch.Upstream
 package/python-pylibftdi/0001-do-not-use-find-library.patch lib_patch.Upstream
 package/python-pyqt5/0001-configure-skip-qtdetail.patch lib_patch.Upstream
@@ -1116,6 +1156,7 @@ package/ripgrep/0001-puts-jemalloc-allocator-behind-a-cargo-feature-flag.patch l
 package/riscv-isa-sim/0001-riscv-disable-precompiled-headers.patch lib_patch.Upstream
 package/rng-tools/S21rngd Shellcheck lib_sysv.Variables
 package/rocksdb/0001-build_tools-build_detect_platform-fix-C-tests.patch lib_patch.Upstream
+package/rp-pppoe/0001-src-pppoe.h-fix-build-with-musl-libc.patch lib_patch.Upstream
 package/rpcbind/0001-Remove-yellow-pages-support.patch lib_patch.Upstream
 package/rpcbind/S30rpcbind lib_sysv.EmptyLastLine lib_sysv.Indent lib_sysv.Variables
 package/rpi-userland/0001-Add-.pc-files-for-the-OpenGLESv2-EGL-and-bcm_host-li.patch lib_patch.Upstream
@@ -1136,10 +1177,13 @@ package/samba4/0001-build-find-pre-built-heimdal-build-tools-in-case-of-.patch l
 package/samba4/0002-ldap_message_test.c-include-stdint.h-before-cmoka.h.patch lib_patch.Upstream
 package/samba4/S91smb Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/sane-backends/0001-sane_backend-add-missing-config.h.patch lib_patch.Upstream
-package/screen/0001-Do-not-create-backup-of-old-installed-binary.patch lib_patch.Upstream
-package/screen/0002-Change-binary-permission-flags-even-if-chown-fails.patch lib_patch.Upstream
-package/screen/0003-Support-overriding-SCREEN-to-get-a-non-versioned-bin.patch lib_patch.Upstream
-package/screen/0004-Renamed-sched.h-to-eventqueue.h.patch lib_patch.Upstream
+package/screen/0001-Do-not-use-memcpy-as-an-alternative-for-bcopy-memmov.patch lib_patch.Upstream
+package/screen/0002-Do-not-create-backup-of-old-installed-binary.patch lib_patch.Upstream
+package/screen/0003-Change-binary-permission-flags-even-if-chown-fails.patch lib_patch.Upstream
+package/screen/0004-Support-overriding-SCREEN-to-get-a-non-versioned-bin.patch lib_patch.Upstream
+package/screen/0005-Renamed-sched.h-to-eventqueue.h.patch lib_patch.Upstream
+package/screen/0006-comm.h-now-depends-on-term.h.patch lib_patch.Upstream
+package/screen/0007-comm.h-needed-for-list_-display-generic-.o.patch lib_patch.Upstream
 package/scrub/0001-configure-ac-make-sure-m4-macros-are-included-in-the-build.patch lib_patch.Upstream
 package/sdl/0001-use-correct-directfb-config.patch lib_patch.Upstream
 package/sdl/0002-fix-compilation-with-libx11.patch lib_patch.Upstream
@@ -1257,6 +1301,7 @@ package/uemacs/01-clear-ixon-termios-flag.patch lib_patch.Upstream
 package/uhd/0001-host-CMakeLists-add-boost-unit_test_framework-requir.patch lib_patch.Upstream
 package/uhttpd/0001-Remove-Werror.patch lib_patch.Upstream
 package/uhttpd/0002-Fix-TCP_FASTOPEN-related-compile-error.patch lib_patch.Upstream
+package/umtprd/0001-Fix-output_dir-make-dependency.patch lib_patch.Upstream
 package/unbound/S70unbound Shellcheck
 package/unifdef/0001-Makefile-fix-error-on-install.patch lib_patch.Upstream
 package/unscd/S46unscd Shellcheck lib_sysv.Indent lib_sysv.Variables
@@ -1324,6 +1369,7 @@ package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.pa
 package/wilc-driver/0005-Fix-cast-warnings.patch lib_patch.Upstream
 package/wipe/0001-musl.patch lib_patch.Upstream
 package/wireless_tools/0001-remove-bzero.patch lib_patch.Upstream
+package/wireshark/0001-cmake-lemon-wipe-CMAKE_-EXE_LINKER_FLAGS-SYSROOT-if-.patch lib_patch.Upstream
 package/woff2/0001-CMake-Handle-multiple-libraries-being-returned-for-B.patch lib_patch.Upstream
 package/wpa_supplicant/ifupdown.sh Shellcheck
 package/x11r7/xapp_luit/0001-posix-openpt.patch lib_patch.Upstream
@@ -1350,10 +1396,15 @@ package/x11r7/xdriver_xf86-video-nouveau/0001-nouveau-fixup-driver-for-new-X-ser
 package/x11r7/xdriver_xf86-video-tdfx/0001-cross.patch lib_patch.Upstream
 package/x11r7/xserver_xorg-server/0001-include-misc.h-fix-uClibc-build.patch lib_patch.Upstream
 package/x11r7/xserver_xorg-server/S40xorg Shellcheck lib_sysv.Variables
+package/x11vnc/0001-Fix-build-on-32bit-arches-with-64bit-time_t.patch lib_patch.Upstream
+package/x11vnc/0002-scan-limit-access-to-shared-memory-segments-to-current-user.patch lib_patch.Upstream
 package/xen/0001-9pfs-include-linux-limits.h-for-XATTR_SIZE_MAX.patch lib_patch.Upstream
 package/xen/0002-Fix-build-with-64-bits-time_t.patch lib_patch.Upstream
 package/xen/0003-libs-light-fix-tv_sec-printf-format.patch lib_patch.Upstream
 package/xen/0004-libs-light-fix-tv_sec-fprintf-format.patch lib_patch.Upstream
+package/xenomai/3.0.10/0001-lib-boilerplate-iniparser-Allow-building-with-GCC-10-2-2020101.patch lib_patch.Upstream
+package/xenomai/3.0.10/0002-Add-disable-demo-testsuite-options.patch lib_patch.Upstream
+package/xenomai/3.0.10/0003-lib-cobalt-copperplate-Use-valid-addresses-for-pthread_setspecific.patch lib_patch.Upstream
 package/xinetd/0001-ar.patch lib_patch.Upstream
 package/xinetd/0002-destdir.patch lib_patch.Upstream
 package/xinetd/0003-rpc-fix.patch lib_patch.Upstream
@@ -1,82 +1,3 @@
-2024.11-rc3, released Decemmber 5th, 2024
-
-	Fixes all over the tree.
-
-	Updated/fixed packages: alsa-lib, android-tools, bats-core,
-	doxygen, frr, gnutls, libvpl, linux-tools, lmbench, lrzsz,
-	musl, nfs-utils, opkg, polkit, postgresql, procps-ng,
-	python-psycopg2, quagga, rt-tests, rust, sexpect
-
-2024.11-rc2, released November 23rd, 2024
-
-	Fixes all over the tree.
-
-	Updated/fixed packages: bmap-tools, go, intel-microcode,
-	libblockdev, libcurl, libkrb5, libnvme, libpng, php,
-	postgresql, python-sip, skopeo, tiff, util-linux-libs
-
-2024.11-rc1, released November 13th, 2024
-
-	Fixes all over the tree and package updates.
-
-	Toolchain:
-
-	- binutils 2.43 added, binutils 2.42 becomes the default.
-	- glibc updated to 2.40
-	- ARM, Bootlin and Synopsys external toolchains updated
-	- Support added for ARM FDPIC, which allows to use shared
-	  libraries on ARM noMMU targets
-
-	Go support: allow using a pre-built Go compiler, using the new
-	go-bin package.
-
-	New defconfigs: friendlyarm_nanopi_neo, nvidia_bf3,
-	stm32f746_disco_sd, ti_am62px_sk, versal_vek280
-
-	Removed defconfigs: qemu_nios2_10m50
-
-	New packages: andes-spi-burn, bfscripts, cpp-httplib, dlib,
-	dpdk, evilwm, go-bin, iana-assignments, iotools, lua-uuid,
-	oath-toolkit, perl-mime-base32, python-aiohappyeyeballs,
-	python-aiomqtt, python-argcomplete, python-dotenv,
-	python-dunamai, python-immutabledict, python-iterable-io,
-	python-path, python-poetry-dynamic-versioning,
-	python-propcache, python-proto-plus, python-psygnal,
-	python-pyaml, python-pydantic-settings, python-pyqt5-sip,
-	python-pysnmpcrypto, python-rgbmatrix, python-sdbus,
-	python-sdbus-networkmanager, python-simple-websocket,
-	python-tinyhtml5, python-zipstream-ng, qt6charts, qt6scxml,
-	superiotool, tailscale, tinyinit, uefisettings
-
-	Removed packages: bsdiff, popperjs
-
-	Added tests: erofs filesystem, audit, dosfstools, dtc,
-	exfatprogs, go-bin, iputils, oath-toolkit, parted, pppd, pv,
-	pyqt5, python-sdbus, python-sdbus-networkmanager, rrdtool,
-	unbound, which
-
-	Issues resolved:
-	- host rpath fixups misses needed directory
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/39
-	- procps-ng: build failure when linking to systemd
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/28
-	- ripgrep leaves /usr/crates2.json / .crates.toml files
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/17
-
-2024.08.2, released November 14th, 2024
-
-	Important / security related fixes.
-
-	Updated/fixed packages: apache, asterisk, bind, cmake, criu,
-	file, fluidsynth, ghostscript, heimdal, intel-microcode,
-	iproute2, jailhouse, jsoncpp, libarchive, libcurl, libldns,
-	libgit2, liblinear, libmdbx, libopenh264, libpng,
-	libtraceevent, libxml2, ltrace, nethogs, nghttp2, ntp,
-	openjdk, php, postgresql,procps-ng, python-pyqt5, python3,
-	qemu, ruby, sqlite, sysvinit, tor, trace-cmd, wpebackend-fdo
-
-	New packages: python-pyqt5-sip
-
 2024.08.1, released October 20th, 2024

 	Important / security related fixes.
@@ -247,44 +168,6 @@
 	- Can't subscribe buildroot mailing list
 	  https://gitlab.com/buildroot.org/buildroot/-/issues/25

-2024.05.3, released September 9th, 2024
-
-	Important / security related fixes.
-
-        A large number of GCC 14.x compilation fixes and additional
-        runtime tests.
-
-        Infrastructure:
-        - Be more robust against text files (for package hashes and
-          users) incorrectly missing a terminating newline.
-
-        - Fix various issues with the pkg-kconfig infrastructure and
-          per-package-directories builds
-          (BR2_PER_PACKAGE_DIRECTORIES).
-
-	Updated/fixed packages: aer-inject, am335x-pru-package,
-	apache, apr, apr-util, attr, augeas, autossh, bandwidthd,
-	bcusdk, boost, brcm-patchram-plus, btrfs-progs, busybox,
-	can-utils, coreutils, cpuload, cryptsetup, cwiid, dhrystone,
-	dvb-apps, elfutils, faifa, fetchmail, ffmpeg, fluent-bit,
-	fluidsynth, freerdp, gcc, gcc-bare-metal, gdb, gnutls, gpsd,
-	hiawatha, hostapd, htop, ibm-sw-tpm2, intel-microcode, iperf3,
-	iproute2, ksmbd-tools, libcli, libcoap, libcurl, libest,
-	libfreefare, libgtk3, libngs, libpwquality, libressl, libupnp,
-	libxml2, libxslt, lrzsz, mdio-tools, micropython,
-	mjpg-streamer, mokutil, mpir, ncftp, nginx, nodejs, odb,
-	open-iscsi, openldap, openswan, openvpn, pistache, procps-ng,
-	python-django, quotatool, rtty, ruby, sconeserver, speex,
-	swaybg, tar, tftpd, tinyssh, uclibc, uclibc-ng-test, unbound,
-	uuu, vorbus-tools, wpewebkit, zfs, zsh
-
-        Issues resolved:
-	- TAR-1.35 will not build for target (host-variant will build)
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/4
-	- Toolchain (host-gcc-final-14.1.0) build failure with
-	  y2038/BR2_TIME_BITS_64 enabled
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/16
-
 2024.05.2, released August 14th, 2024

 	Important / security related fixes.
@@ -455,88 +338,6 @@
        #16036: android-tools version is too old
        #16075: Cannot use linux kernel extensions from external tree..

-2024.02.8, released November 14th, 2024
-
-	Important / security related fixes.
-
-	Updated/fixed packages: apache, asterisk, bind, bootgen, criu,
-	file, fluidsynth, ghostscript, heimdal, intel-microcode,
-	jailhouse, jsoncpp, libarchive, libcurl, libldns, liblinear,
-	libmdbx, libopenh264, ltrace, lightning, nghttp2, ntp, php,
-	postgresql, procps-ng, python-pyqt5, ruby, sysvinit, tor,
-	wpebackend-fdo
-
-	New packages: python-pyqt5-sip
-
-2024.02.7, released October 21th, 2024
-
-	Important / security related fixes.
-
-	Per-package-directories fixes for the .gdbinit file and RPATH
-	fixups for SDK.
-
-	utils/check-package: Also check for correct indentation of
-	help lines.
-
-	A large number of typo fixes.
-
-	Updated/fixed packages: aer-inject, armadillo, asterisk,
-	aumix, babeld, bind, botan, cache-calibrator, clamav,
-	comix-cursors, cryptsetup, cups, dovecot, dovecot-pigeonhole,
-	expat, fbset, genpart, glibc, gnu-efi, gnutls, go, grub2,
-	libarchive, libcuefile, libcurl, libglob, libgpg-error,
-	libilbc, libkcapi, libopenssl, libpcap, libuecc, linux-pam,
-	mosquitto, nginx, ntpsec, p910nd, php, postgresql, procps-ng,
-	proftpd, pure-ftpd, python-django, python-huepy,
-	python-sqlparse, python-unittest-xml-reporting, python3,
-	qt6base, qt6svg, rp-pppoe, sofia-sip, strongswan, szip,
-	tllist, unbound, wpebackend-fdo, wpewebkit, x264, xenomai,
-	xserver_xorg-server, zabbix
-
-	New packages: go-bootstrap-stage3
-
-	Issues resolved:
-	- procps-ng: build failure when linking to systemd
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/28
-	- orange pi 2w does not boot
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/36
-	- glibc configure fails on aarch64 with mathvec SVE ACLE error
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/40
-	- Kernel Build from Custom Git Repo fails with hash-error
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/46
-	- package/linux-pam: Remove unneeded flex dependency
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/47
-
-2024.02.6, released September 9th, 2024
-
-	Important / security related fixes.
-
-        Added a large number of additional runtime tests.
-
-        Infrastructure:
-        - Be more robust against text files (for package hashes and
-          users) incorrectly missing a terminating newline.
-
-        - Fix various issues with the pkg-kconfig infrastructure and
-          per-package-directories builds
-          (BR2_PER_PACKAGE_DIRECTORIES).
-
-	Updated/fixed packages: aer-inject, am335x-pru-package,
-	apache, apr, apr-util, attr, boost, btrfs-progs, busybox,
-	cryptsetup, dropbear, elfutils, fetchmail, ffmpeg, fluidsynth,
-	freerdp, gcc, gdb, gnutls, gpsd, hiawatha, hostapd, htop,
-	intel-microcode, iperf3, ksmbd-tools, libcoap, libcurl,
-	libest, libgtk3, libpwquality, libressl, libupnp, libxml2,
-	libxslt, lrzsz, mdio-tools, micropython, mjpg-streamer, mpir,
-	ncftp, nginx, nodejs, open-iscsi, openldap, openvpn, pistache,
-	procps-ng, python-django, ruby, speex, swaybg, tinyssh,
-	uclibc, uclibc-ng-test, unbound, uuu, wpewebkit, zfs
-
-        Issues resolved:
-	- Toolchain (host-gcc-final-14.1.0) build failure with
-	  y2038/BR2_TIME_BITS_64 enabled
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/16
-
 2024.02.5, released August 14th, 2024

 	Important / security related fixes.
@@ -963,7 +963,7 @@ config BR2_FORTIFY_SOURCE_2
 	# gcc bug https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61164
 	depends on !BR2_TOOLCHAIN_BUILDROOT || BR2_TOOLCHAIN_GCC_AT_LEAST_6
 	help
-	  This option sets _FORTIFY_SOURCE to 2 and some more
+	  This option sets _FORTIFY_SOURCES to 2 and some more
 	  checking is added, but some conforming programs might fail.
 	  Also adds checks at run-time (detected buffer overflow
 	  terminates the program)
@@ -972,7 +972,7 @@ config BR2_FORTIFY_SOURCE_3
 	bool "Extended"
 	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_12
 	help
-	  This option sets _FORTIFY_SOURCE to 3 and even more
+	  This option sets _FORTIFY_SOURCES to 3 and even more
 	  checking is added compared to level 2. Extends checks at
 	  run-time that can introduce an additional performance
 	  overhead.
@@ -144,95 +144,6 @@ endif

 ###############################################################################

-comment "Legacy options removed in 2024.11"
-
-config BR2_PACKAGE_BSDIFF
-	bool "bsdiff has been removed"
-	select BR2_LEGACY
-	help
-	  The bsdiff package was removed as it is not maintained
-	  anymore (no commit since 2014).
-
-config BR2_PACKAGE_PROCPS_NS_ORIGINAL_TOP
-	bool "BR2_PACKAGE_PROCPS_NS_ORIGINAL_TOP has been renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_PROCPS_NG_ORIGINAL_TOP
-	help
-	  The option has been renamed to
-	  BR2_PACKAGE_PROCPS_NG_ORIGINAL_TOP.
-
-config BR2_PACKAGE_QEMU_TARGET_NIOS2
-	bool "qemu nios2 support has been removed"
-	select BR2_LEGACY
-	help
-	  NIOS2 support has been removed since Qemu 9.1.0.
-
-config BR2_PACKAGE_POPPERJS
-	bool "popperjs has been removed"
-	select BR2_LEGACY
-	help
-	  The project has been renamed to floating-ui.
-
-config BR2_KERNEL_HEADERS_6_10
-	bool "kernel headers version 6.10.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 6.10.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_PACKAGE_IPMITOOL_PEN_REG_URI
-	string "IANA PEN registry moved to iana-assignment package"
-	help
-	  Installation of the IANA PEN is now handled by the
-	  iana-assignment package; to install a custom PEN,
-	  use a rootfs-overlay for example.
-
-config BR2_PACKAGE_IPMITOOL_PEN_REG_URI_WRAP
-	bool
-	default y if BR2_PACKAGE_IPMITOOL_PEN_REG_URI != ""
-	select BR2_LEGACY
-
-config BR2_PACKAGE_ERLANG_P1_YAML
-	bool "erlang-p1-yaml has been renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_ERLANG_FAST_YAML
-	help
-	  The erlang-p1-yaml package has been renamed to
-	  erlang-fast-yaml.
-
-config BR2_PACKAGE_ERLANG_P1_XMPP
-	bool "erlang-p1-xmpp has been renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_ERLANG_XMPP
-	help
-	  The erlang-p1-xmpp package has been renamed to erlang-xmpp.
-
-config BR2_PACKAGE_ERLANG_P1_XML
-	bool "erlang-p1-xml has been renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_ERLANG_FAST_XML
-	help
-	  The erlang-p1-xml package has been renamed to erlang-fast-xml.
-
-config BR2_PACKAGE_ERLANG_P1_STUN
-	bool "erlang-p1-stun has been renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_ERLANG_STUN
-	help
-	  The erlang-p1-stun package has been renamed to erlang-stun.
-
-config BR2_PACKAGE_FBV_GIF
-	bool "fbv GIF support has been removed"
-	select BR2_LEGACY
-	help
-	  Fbv GIF support has been removed, use PNG, BMP or JPEG.
-
-config BR2_BINUTILS_VERSION_2_40_X
-	bool "binutils 2.40 has been removed"
-	select BR2_LEGACY
-	help
-	  binutils 2.40 has been removed, use a newer version.
-
 comment "Legacy options removed in 2024.08"

 config BR2_PACKAGE_MIDORI
@@ -81,9 +81,6 @@ F:	package/libmbim/
 F:	package/libqmi/
 F:	package/modem-manager/

-N:	Aleksandr Makarov <aleksandr.o.makarov@gmail.com>
-F:	package/cpp-httplib/
-
 N:	Alessandro Partesotti <a.partesotti@gmail.com>
 F:	package/oatpp/

@@ -242,7 +239,11 @@ F:	package/sysdig/

 N:	Andy Shevchenko <andy.shevchenko@gmail.com>
 F:	package/fb-test-app/
-F:	package/iotools/
+
+N:	Anisse Astier <anisse@astier.eu>
+F:	package/go/
+F:	package/nghttp2/
+F:	package/pkg-golang.mk

 N:	Anthony Viallard <viallard@syscom-instruments.com>
 F:	package/gnuplot/
@@ -282,6 +283,18 @@ F:	package/python-bottle/
 F:	package/sqlcipher/
 F:	package/stress/

+N:	Asaf Kahlon <asafka7@gmail.com>
+F:	package/collectd/
+F:	package/libfuse3/
+F:	package/libuv/
+F:	package/python*
+F:	package/snmpclitools/
+F:	package/spdlog/
+F:	package/uftp/
+F:	package/uftrace/
+F:	package/uvw/
+F:	package/zeromq/
+
 N:	Ash Charles <ashcharles@gmail.com>
 F:	package/pru-software-support/
 F:	package/ti-cgt-pru/
@@ -406,6 +419,7 @@ F:	package/libfreeglut/
 F:	package/libfribidi/
 F:	package/libg7221/
 F:	package/libglew/
+F:	package/libglfw/
 F:	package/libglu/
 F:	package/libhdhomerun/
 F:	package/libheif/
@@ -545,10 +559,6 @@ F:	package/vmtouch/
 F:	support/testing/tests/package/test_atftp.py
 F:	support/testing/tests/package/test_zip.py

-N:	Brandon Maier <brandon.maier@gmail.com>
-F:	package/dtc/
-F:	support/testing/tests/package/test_dtc*
-
 N:	Brock Williams <brock@cottonwoodcomputer.com>
 F:	package/pdmenu/

@@ -559,7 +569,6 @@ F:	boot/ti-k3-boot-firmware/
 F:	boot/ti-k3-r5-loader/
 F:	configs/beagleplay_defconfig
 F:	configs/ti_am62ax_sk_defconfig
-F:	configs/ti_am62px_sk_defconfig
 F:	configs/ti_am62x_sk_defconfig
 F:	configs/ti_am64x_sk_defconfig

@@ -600,9 +609,6 @@ F:	package/gstreamer1/gst1-shark/
 F:	package/micropython/
 F:	package/syslog-ng/

-N:	Christian Hitz <christian@klarinett.li>
-F:	package/qt6/qt6scxml/
-
 N:	Christian Kellermann <christian.kellermann@solectrix.de>
 F:	package/python-pylibftdi/

@@ -779,19 +785,14 @@ F:	package/xinetd/

 N:	Dario Binacchi <dario.binacchi@amarulasolutions.com>
 F:	board/bsh/
-F:	board/stmicroelectronics/stm32f746-disco/
 F:	board/stmicroelectronics/stm32f769-disco/
 F:	configs/imx6ulz_bsh_smm_m2_defconfig
 F:	configs/imx8mn_bsh_smm_s2_defconfig
 F:	configs/imx8mn_bsh_smm_s2_pro_defconfig
-F:	configs/stm32f746_disco_sd_defconfig
 F:	configs/stm32f769_disco_sd_defconfig
-F:	package/aespipe/
 F:	package/armadillo/
 F:	package/babeld/
-F:	package/iana-assignments/
 F:	package/sscep/
-F:	package/tinyinit/
 F:	package/uuu/

 N:	Dario Binacchi <dariobin@libero.it>
@@ -869,10 +870,6 @@ F:	package/logsurfer/
 N:	Dominik Michael Rauh <dmrauh@posteo.de>
 F:	package/gdal/

-N:	Dong Wang <wangdong115@foxmail.com>
-F:	board/friendlyarm/nanopi-neo/
-F:	configs/friendlyarm_nanopi_neo_defconfig
-
 N:	Doug Kehn <rdkehn@gmail.com>
 F:	package/nss-pam-ldapd/
 F:	package/sp-oops-extract/
@@ -922,6 +919,18 @@ N:	Eric Limpens <limpens@gmail.com>
 F:	package/pifmrds/
 F:	package/ympd/

+N:	Erico Nunes <nunes.erico@gmail.com>
+F:	board/aarch64-efi/
+F:	configs/aarch64_efi_defconfig
+F:	package/acpica/
+F:	package/acpitool/
+F:	package/efibootmgr/
+F:	package/efivar/
+F:	package/fwts/
+F:	package/spi-tools/
+F:	package/xdotool/
+F:	configs/pc_x86_64_*
+
 N:	Erik Larsson <karl.erik.larsson@gmail.com>
 F:	package/imx-mkimage/

@@ -1093,10 +1102,6 @@ N:	Falco Hyfing <hyfinglists@gmail.com>
 F:	package/python-pymodbus/

 N:	Fiona Klute <fiona.klute@gmx.de>
-F:	package/*/S*
-F:	package/python-aiomqtt/
-F:	package/python-dunamai/
-F:	package/python-poetry-dynamic-versioning/
 F:	package/python-pyasynchat/
 F:	package/python-pyasyncore/

@@ -1445,18 +1450,7 @@ F:	package/axel/
 F:	package/mawk/

 N:	J. Neuschäfer <j.neuschaefer@gmx.net>
-F:	package/execline/
-F:	package/mdevd/
-F:	package/python-rgbmatrix/
-F:	package/rpi-rgb-led-matrix/
-F:	package/s6/
-F:	package/s6-linux-init/
-F:	package/s6-linux-utils/
-F:	package/s6-networking/
-F:	package/s6-portable-utils/
-F:	package/s6-rc/
-F:	package/skalibs/
-F:	package/tipidee/
+F:	package/tipidee

 N:	Jagan Teki <jagan@amarulasolutions.com>
 F:	board/amarula/
@@ -1510,9 +1504,6 @@ F:	package/serd/
 F:	package/sord/
 F:	package/sratom/
 F:	package/stb/
-F:	package/superiotool/
-F:	package/tailscale/
-F:	package/uefisettings/
 F:	package/zchunk/
 F:	support/testing/tests/package/sample_python_rtoml.py
 F:	support/testing/tests/package/test_python_rtoml.py
@@ -1659,8 +1650,6 @@ N:	Johan Oudinet <johan.oudinet@gmail.com>
 F:	package/ejabberd/
 F:	package/erlang-base64url/
 F:	package/erlang-eimp/
-F:	package/erlang-fast-xml/
-F:	package/erlang-fast-yaml/
 F:	package/erlang-goldrush/
 F:	package/erlang-idna/
 F:	package/erlang-jiffy/
@@ -1673,12 +1662,14 @@ F:	package/erlang-p1-oauth2/
 F:	package/erlang-p1-pkix/
 F:	package/erlang-p1-sip/
 F:	package/erlang-p1-stringprep/
+F:	package/erlang-p1-stun/
 F:	package/erlang-p1-tls/
 F:	package/erlang-p1-utils/
+F:	package/erlang-p1-xml/
+F:	package/erlang-p1-xmpp/
+F:	package/erlang-p1-yaml/
 F:	package/erlang-p1-yconf/
 F:	package/erlang-p1-zlib/
-F:	package/erlang-stun/
-F:	package/erlang-xmpp/
 F:	package/forge/
 F:	package/nginx-dav-ext/
 F:	package/vis-network/
@@ -1801,7 +1792,6 @@ F:	package/kexec/
 F:	package/libjxl/
 F:	package/libopenmpt/
 F:	package/mokutil/
-F:	package/oath-toolkit/
 F:	package/octave/
 F:	package/ola/
 F:	package/openblas/
@@ -1849,7 +1839,6 @@ F:	support/testing/tests/package/test_acpica/
 F:	support/testing/tests/package/test_apache.py
 F:	support/testing/tests/package/test_attr.py
 F:	support/testing/tests/package/test_audio_codec_base.py
-F:	support/testing/tests/package/test_audit.py
 F:	support/testing/tests/package/test_bc.py
 F:	support/testing/tests/package/test_bcc.py
 F:	support/testing/tests/package/test_bcc/
@@ -1866,8 +1855,6 @@ F:	support/testing/tests/package/test_ddrescue.py
 F:	support/testing/tests/package/test_ddrescue/
 F:	support/testing/tests/package/test_dmidecode.py
 F:	support/testing/tests/package/test_dos2unix.py
-F:	support/testing/tests/package/test_dosfstools.py
-F:	support/testing/tests/package/test_dosfstools/
 F:	support/testing/tests/package/test_ed.py
 F:	support/testing/tests/package/test_ethtool.py
 F:	support/testing/tests/package/test_ethtool/
@@ -1899,7 +1886,6 @@ F:	support/testing/tests/package/test_iperf.py
 F:	support/testing/tests/package/test_iperf3.py
 F:	support/testing/tests/package/test_iproute2.py
 F:	support/testing/tests/package/test_iptables.py
-F:	support/testing/tests/package/test_iputils.py
 F:	support/testing/tests/package/test_jailhouse.py
 F:	support/testing/tests/package/test_jq.py
 F:	support/testing/tests/package/test_jq/
@@ -1948,18 +1934,14 @@ F:	support/testing/tests/package/test_ntp.py
 F:	support/testing/tests/package/test_ntp/
 F:	support/testing/tests/package/test_numactl.py
 F:	support/testing/tests/package/test_numactl/
-F:	support/testing/tests/package/test_oath_toolkit.py
 F:	support/testing/tests/package/test_octave.py
 F:	support/testing/tests/package/test_ola.py
 F:	support/testing/tests/package/test_ola/
 F:	support/testing/tests/package/test_openblas.py
-F:	support/testing/tests/package/test_parted.py
 F:	support/testing/tests/package/test_pciutils.py
 F:	support/testing/tests/package/test_perftest.py
 F:	support/testing/tests/package/test_pigz.py
 F:	support/testing/tests/package/test_postgresql.py
-F:	support/testing/tests/package/test_pppd.py
-F:	support/testing/tests/package/test_pppd/
 F:	support/testing/tests/package/test_pv.py
 F:	support/testing/tests/package/test_python_distro.py
 F:	support/testing/tests/package/test_python_gnupg.py
@@ -1970,13 +1952,10 @@ F:	support/testing/tests/package/test_python_midiutil.py
 F:	support/testing/tests/package/test_python_ml_dtypes.py
 F:	support/testing/tests/package/test_python_mpmath.py
 F:	support/testing/tests/package/test_python_pyalsa.py
-F:	support/testing/tests/package/test_python_pyqt5.py
-F:	support/testing/tests/package/test_python_pyqt5/
 F:	support/testing/tests/package/test_python_spake2.py
 F:	support/testing/tests/package/test_python_sympy.py
 F:	support/testing/tests/package/test_rdma_core.py
 F:	support/testing/tests/package/test_rdma_core/
-F:	support/testing/tests/package/test_rrdtool.py
 F:	support/testing/tests/package/test_rt_tests.py
 F:	support/testing/tests/package/test_screen.py
 F:	support/testing/tests/package/test_sed.py
@@ -1994,14 +1973,11 @@ F:	support/testing/tests/package/test_tesseract_ocr.py
 F:	support/testing/tests/package/test_thttpd.py
 F:	support/testing/tests/package/test_trace_cmd.py
 F:	support/testing/tests/package/test_trace_cmd/
-F:	support/testing/tests/package/test_unbound.py
-F:	support/testing/tests/package/test_unbound/
 F:	support/testing/tests/package/test_usbutils.py
 F:	support/testing/tests/package/test_usbutils/
 F:	support/testing/tests/package/test_vorbis_tools.py
 F:	support/testing/tests/package/test_weston.py
 F:	support/testing/tests/package/test_weston/
-F:	support/testing/tests/package/test_which.py
 F:	support/testing/tests/package/test_wine.py
 F:	support/testing/tests/package/test_xfsprogs.py
 F:	support/testing/tests/package/test_xfsprogs/
@@ -2119,6 +2095,11 @@ F:	package/python-huepy/
 F:	package/python-tqdm/
 F:	package/rtl8189es/

+N:	Louis-Paul Cordier <lpdev@cordier.org>
+F:	package/intel-gmmlib/
+F:	package/intel-mediadriver/
+F:	package/intel-mediasdk/
+
 N:	Luca Ceresoli <luca.ceresoli@bootlin.com>
 F:	board/olimex/a20_olinuxino/
 F:	board/zynq/
@@ -2232,7 +2213,6 @@ N:	Marcus Hoffmann <bubu@bubu1.eu>
 F:	package/nethogs/
 F:	package/pico-sdk/
 F:	package/picotool/
-F:	package/python-immutabledict/
 F:	package/python-jc/
 F:	package/python-ruamel-yaml-clib/
 F:	support/testing/tests/package/test_python_fastapi.py
@@ -2262,7 +2242,7 @@ F:	configs/qemu_riscv32_virt_defconfig
 F:	configs/qemu_riscv64_virt_defconfig

 N:	Marleen Vos <marleen.vos@mind.be>
-F:	board/stmicroelectronics/common/stm32mp1xx/
+F:	board/stmicroelectronics/common/stm32mp157/
 F:	configs/avenger96_defconfig
 F:	configs/stm32mp157a_dk1_defconfig
 F:	configs/stm32mp157c_dk2_defconfig
@@ -2428,7 +2408,6 @@ F:	board/zynq/
 F:	board/zynqmp/
 F:	boot/xilinx-prebuilt/
 F:	configs/versal_vck190_defconfig
-F:	configs/versal_vek280_defconfig
 F:	configs/versal_vpk180_defconfig
 F:	configs/zynq_zc702_defconfig
 F:	configs/zynq_zc706_defconfig
@@ -2484,7 +2463,6 @@ F:	support/testing/tests/package/test_python_git.py
 F:	support/testing/tests/package/test_python_unittest_xml_reporting.py

 N:	Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
-F:	package/bluez-alsa/
 F:	package/libgit2/

 N:	Nicolas Serafini <nicolas.serafini@ik.me>
@@ -2510,10 +2488,9 @@ F:	package/dbus-broker/
 F:	package/systemd/
 F:	package/tcf-agent/

-N:	Leo Yu-Chi Liang <ycliang@andestech.com>
+N:	Yu Chien Peter Lin <peterlin@andestech.com>
 F:	board/andes
 F:	configs/andes_ae350_45_defconfig
-F:	package/andes-spi-burn/
 F:	package/kmon/

 N:	Olaf Rempel <razzor@kopf-tisch.de>
@@ -2743,9 +2720,6 @@ F:	package/gupnp-av/
 F:	package/let-me-create/
 F:	package/nanomsg/

-N:	Ralf Dragon <hypnotoad@lindra.de>
-F:	package/python-pyqt5-sip/
-
 N:	Ramon Fried <rfried.dev@gmail.com>
 F:	package/bitwise/

@@ -2759,20 +2733,14 @@ F:	package/python-jmespath/
 F:	package/python-pymupdf/
 F:	package/python-rsa/
 F:	package/python-s3transfer/
-F:	package/python-sdbus/
-F:	package/python-sdbus-networkmanager/
 F:	support/testing/tests/package/sample_python_jmespath.py
 F:	support/testing/tests/package/sample_python_pymupdf.py
 F:	support/testing/tests/package/sample_python_rsa.py
 F:	support/testing/tests/package/sample_python_s3transfer.py
-F:	support/testing/tests/package/sample_python_sdbus.py
-F:	support/testing/tests/package/sample_python_sdbus_networkmanager.py
 F:	support/testing/tests/package/test_python_jmespath.py
 F:	support/testing/tests/package/test_python_pymupdf.py
 F:	support/testing/tests/package/test_python_rsa.py
 F:	support/testing/tests/package/test_python_s3transfer.py
-F:	support/testing/tests/package/test_python_sdbus.py
-F:	support/testing/tests/package/test_python_sdbus_networkmanager.py

 N:	Raphael Pavlidis <raphael.pavlidis@gmail.com>
 F:	package/nvidia-persistenced/
@@ -2894,7 +2862,6 @@ F:	support/testing/tests/package/test_python_mako.py
 F:	toolchain/

 N:	Roy Kollen Svendsen <roykollensvendsen@gmail.com>
-F:	package/dlib/
 F:	package/qt6/

 N:	Rufus Segar <rhs@riseup.net>
@@ -3210,8 +3177,6 @@ F:	support/testing/tests/package/test_python_flask.py
 F:	support/testing/tests/package/test_python_flask_expects_json.py
 F:	support/testing/tests/package/test_python_git.py
 F:	support/testing/tests/package/test_python_unittest_xml_reporting.py
-F:	support/testing/tests/toolchain/test_external_arm.py
-F:	support/testing/tests/toolchain/test_external_synopsys.py
 F:	toolchain/

 N:	Timo Ketola <timo.ketola@exertus.fi>
@@ -3263,12 +3228,6 @@ F:	package/rtl8822cs/
 N:	Victor Huesca <victor.huesca@bootlin.com>
 F:	support/testing/tests/core/test_root_password.py

-N:	Vincent Jardin <vjardin@free.fr>
-F:	board/nvidia/bf3/
-F:	configs/nvidia_bf3_defconfig
-F:	package/bfscripts/
-F:	package/dpdk/
-
 N:	Vincent Prince <vincent.prince.fr@gmail.com>
 F:	package/nss-myhostname/
 F:	package/utp_com/
@@ -3310,18 +3269,13 @@ F:	package/ngrep/

 N:	Waldemar Brodkorb <wbx@openadk.org>
 F:	board/qemu/riscv32-virt/
-F:	board/stmicroelectronics/stm32f746-disco/
 F:	configs/qemu_riscv32_nommu_virt_defconfig
-F:	configs/stm32f746_disco_sd_defconfig
 F:	package/asterisk/
-F:	package/evilwm/
-F:	package/fbv/
 F:	package/libjwt/
 F:	package/mksh/
 F:	package/ruby/
 F:	package/uclibc/
 F:	package/uclibc-ng-test/
-F:	package/zabbix/
 F:	support/testing/tests/package/test_ruby.py

 N:	Will Newton <will.newton@gmail.com>
@@ -3365,6 +3319,54 @@ F:	package/casync/
 F:	package/gloox/
 F:	package/tpm2-pkcs11/

+N:	Yann E. MORIN <yann.morin.1998@free.fr>
+F:	fs/squashfs/
+F:	package/asterisk/
+F:	package/cegui/
+F:	package/dahdi-linux/
+F:	package/dahdi-tools/
+F:	package/dbus-broker/
+F:	package/dtc/
+F:	package/dtv-scan-tables/
+F:	package/freerdp/
+F:	package/keyutils/
+F:	package/libbsd/
+F:	package/libedit/
+F:	package/libgsm/
+F:	package/libiberty/
+F:	package/libinput/
+F:	package/libiscsi/
+F:	package/libpri/
+F:	package/libseccomp/
+F:	package/libss7/
+F:	package/linux-firmware/
+F:	package/linux-tools/
+F:	package/matchbox*
+F:	package/mesa3d-headers/
+F:	package/nbd/
+F:	package/nut/
+F:	package/nvidia-driver/
+F:	package/python-pyparsing/
+F:	package/pkg-download.mk
+F:	package/pkg-waf.mk
+F:	package/slirp/
+F:	package/snappy/
+F:	package/spice/
+F:	package/spice-protocol/
+F:	package/systemd/
+F:	package/systemd-bootchart/
+F:	package/tmux/
+F:	package/tvheadend/
+F:	package/usbredir/
+F:	package/vde2/
+F:	package/w_scan/
+F:	package/wayland/
+F:	package/weston/
+F:	package/wtfutil/
+F:	package/zisofs-tools/
+F:	support/download/
+F:	support/testing/tests/graphics_base.py
+
 N:	Yann E. MORIN <yann.morin@orange.com>
 F:	.editorconfig
 F:	package/gpsd/
@@ -92,9 +92,9 @@ all:
 .PHONY: all

 # Set and export the version string
-export BR2_VERSION := 2024.11-rc3
+export BR2_VERSION := 2024.08.1
 # Actual time the release is cut (for reproducible builds)
-BR2_VERSION_EPOCH = 1733418000
+BR2_VERSION_EPOCH = 1729431000

 # Save running make version since it's clobbered by the make package
 RUNNING_MAKE_VERSION := $(MAKE_VERSION)
@@ -12,9 +12,6 @@ config BR2_SOFT_FLOAT
 config BR2_USE_MMU
 	bool

-config BR2_ARCH_HAS_FDPIC_SUPPORT
-	bool
-
 choice
 	prompt "Target Architecture"
 	default BR2_i386
@@ -315,10 +312,6 @@ config BR2_ARCH_NEEDS_GCC_AT_LEAST_14
 	bool
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_13

-config BR2_ARCH_NEEDS_GCC_AT_LEAST_15
-	bool
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_14
-
 # The following string values are defined by the individual
 # Config.in.$ARCH files
 config BR2_ARCH
@@ -444,16 +437,6 @@ config BR2_BINFMT_ELF
 	  and executables used across different architectures and
 	  operating systems.

-config BR2_BINFMT_FDPIC
-	bool "FDPIC"
-	depends on BR2_ARCH_HAS_FDPIC_SUPPORT
-	select BR2_BINFMT_SUPPORTS_SHARED
-	help
-	  ELF FDPIC binaries are based on ELF, but allow the individual
-	  load segments of a binary to be located in memory
-	  independently of each other. This makes this format ideal for
-	  use in environments where no MMU is available.
-
 config BR2_BINFMT_FLAT
 	bool "FLAT"
 	depends on !BR2_USE_MMU
@@ -89,7 +89,6 @@ config BR2_ARM_CPU_ARMV7A

 config BR2_ARM_CPU_ARMV7M
 	bool
-	select BR2_ARCH_HAS_FDPIC_SUPPORT

 config BR2_ARM_CPU_ARMV8A
 	bool
@@ -23,11 +23,6 @@ choice
 	help
 	  Specific CPU variant to use

-config BR2_m68k_68030
-	bool "68030"
-	select BR2_m68k_m68k
-	select BR2_USE_MMU
-
 config BR2_m68k_68040
 	bool "68040"
 	select BR2_m68k_m68k
@@ -41,7 +36,6 @@ config BR2_m68k_cf5208
 endchoice

 config BR2_GCC_TARGET_CPU
-	default "68030"		if BR2_m68k_68030
 	default "68040"		if BR2_m68k_68040
 	default "5208"		if BR2_m68k_cf5208

@@ -1,2 +0,0 @@
-# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc
-sha256  524858852f5869a9ef17de8b1e6e7faf05bcb2c462bc96b3c24dbf82ede373cf  linux-6.10.12.tar.xz
@@ -1,5 +1,5 @@
 #!/bin/sh

-BOARD_DIR=$(dirname "$0")
+BOARD_DIR="$(dirname $0)"

-cp -f "${BOARD_DIR}/grub.cfg" "${BINARIES_DIR}/efi-part/EFI/BOOT/grub.cfg"
+cp -f ${BOARD_DIR}/grub.cfg ${BINARIES_DIR}/efi-part/EFI/BOOT/grub.cfg
@@ -149,14 +149,8 @@
 					#address-cells = <1>;
 					#size-cells = <1>;

-					nvmem-layout {
-						compatible = "fixed-layout";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						eth0_addr: eth-mac-addr@9A {
-							reg = <0x0 0x06>;
-						};
+					eth0_addr: eth-mac-addr@9A {
+						reg = <0x0 0x06>;
 					};
 				};
 				
@@ -41,49 +41,6 @@ After building, you should obtain the following files:
  |-- u-boot-spl.bin
  `-- u-boot.itb

-How to update the bootloader and device-tree
-============================================
-
-To update the bootloader and device tree, make sure you have
-an ICEman (Andes OpenOCD [1]) and AICE [2] connection set up
-as below:
-
-  Local Host                 Local/Remote Host
- .-----------------.          .--------------.
- | buildroot images|          |              |
- |                 |         ICEman host <IP:PORT>
- | .----------.    |          |  .--------.  |
- | | SPI_burn |<---+--socket--+->| ICEman |  |
- | '----------'    |          |  '--.-----'  |
- '-----------------'          '-----|--------'
-                                    |
-                                    USB
-   .--------------.                 |
-   | target       |           .-----v-----.
-   | board        <----JTAG---| AICE      |
-   |              |           '-----------'
-   '--------------'
-
-[1] https://github.com/andestech/ICEman
-[2] https://www.andestech.com/en/products-solutions/andeshape-platforms/aice-micro/
-
-The Andes SPI_burn tool will be located in output/host/bin. Use
-the following commands to update the bootloader and device tree:
-
-  $ SPI_burn --host $ICE_IP --port $ICE_BURNER_PORT --addr 0x0     -i u-boot-spl.bin
-  $ SPI_burn --host $ICE_IP --port $ICE_BURNER_PORT --addr 0x10000 -i u-boot.itb
-  $ SPI_burn --host $ICE_IP --port $ICE_BURNER_PORT --addr 0xf0000 -i ae350_ax45mp.dtb
-
-Note that the --addr option specifies the offset starting from
-the flash base address 0x80000000 and set by U-Boot configurations.
-e.g.
-u-boot-spl.bin  : CONFIG_SPL_TEXT_BASE=0x80000000
-u-boot.itb      : CONFIG_SPL_LOAD_FIT_ADDRESS=0x80010000
-ae350_ax45mp.dtb: CONFIG_SYS_FDT_BASE=0x800f0000
-
-How to write the SD card
-========================
-
 Copy the sdcard.img to a SD card with "dd":

  $ sudo dd if=sdcard.img of=/dev/sdX bs=4096
@@ -1,5 +1,6 @@
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_MMC=y
+# CONFIG_SPL_RAM_SUPPORT is not set
 CONFIG_SPL_OPENSBI_LOAD_ADDR=0x0
 CONFIG_SPL_OPENSBI_SCRATCH_OPTIONS=0x0
 CONFIG_DISPLAY_CPUINFO=y
@@ -0,0 +1,45 @@
+From 8c30a0c7fe0162de0618b26fb34cc91ea582e5f7 Mon Sep 17 00:00:00 2001
+From: Debbie Martin <Debbie.Martin@arm.com>
+Date: Wed, 27 Sep 2023 18:05:26 +0100
+Subject: [PATCH] feat(fvp): add stdout-path
+
+Add stdout-path to the fvp-base devicetree to be passed to BL33 (U-Boot)
+and then to the Linux kernel to be compliant to Arm SystemReady IR:
+https://developer.arm.com/documentation/DUI1101/2-0/
+Configure-U-Boot-for-SystemReady/Adapt-the-Devicetree
+
+This has been tested by booting fvp-base to Linux and ensuring the
+console is accessible.
+
+Change-Id: Iae98630f18f735ce344c1158f41f358c2a49eeb6
+Signed-off-by: Diego Sueiro <Diego.Sueiro@arm.com>
+Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
+Upstream: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/+/8c30a0c7fe0162de0618b26fb34cc91ea582e5f7%5E!/
+Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
+---
+ fdts/fvp-base-psci-common.dtsi | 7 ++++---
+ 1 file changed, 4 insertions(+), 3 deletions(-)
+
+diff --git a/fdts/fvp-base-psci-common.dtsi b/fdts/fvp-base-psci-common.dtsi
+index 79cf37d3b0..ff31ba7616 100644
+--- a/fdts/fvp-base-psci-common.dtsi
+++ b/fdts/fvp-base-psci-common.dtsi
+@@ -27,11 +27,12 @@
+ 	#address-cells = <2>;
+ 	#size-cells = <2>;
+ 
+	chosen {
+		stdout-path = "serial0:115200n8";
+ #if (ENABLE_RME == 1)
+-	chosen { bootargs = "console=ttyAMA0 earlycon=pl011,0x1c090000 root=/dev/vda ip=on";};
+-#else
+-	chosen {};
+		bootargs = "console=ttyAMA0 earlycon=pl011,0x1c090000 root=/dev/vda ip=on";
+ #endif
+	};
+ 
+ 	aliases {
+ 		serial0 = &v2m_serial0;
+-- 
+2.43.0
+
@@ -0,0 +1,2 @@
+# Locally calculated
+sha256  7efa89e1b4e4106ee05d68e876c8efbb146364d89cfd5d26bf4647b09c08f32b  arm-trusted-firmware-v2.10-git4.tar.gz
@@ -1,2 +1,2 @@
-# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc
-sha256  524858852f5869a9ef17de8b1e6e7faf05bcb2c462bc96b3c24dbf82ede373cf  linux-6.10.12.tar.xz
+# Locally calculated
+sha256  b78dcd09f6b725872a2c0c87a70a064b0fbbcccfe5ce60aa46c669934a9e28b6  linux-6.8.11.tar.xz
@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  f591da9ab90ef3d6b3d173766d0ddff90c4ed7330680897486117df390d83c8f  u-boot-2024.07.tar.bz2
+sha256  077cf8ca283411103ad274a3724dacb5068ede824de749beff9c9e5b531b43ea  u-boot-2024.07-rc3.tar.bz2
@@ -26,8 +26,8 @@ Running on the FVP
 Download the FVP from one of the following sources, corresponding to your host
 computer:

- https://developer.arm.com/-/cdn-downloads/permalink/Fixed-Virtual-Platforms/FM-11.27/FVP_Base_RevC-2xAEMvA_11.27_19_Linux64.tgz
- https://developer.arm.com/-/cdn-downloads/permalink/Fixed-Virtual-Platforms/FM-11.27/FVP_Base_RevC-2xAEMvA_11.27_19_Linux64_armv8l.tgz
+- https://developer.arm.com/-/media/Files/downloads/ecosystem-models/FM_11_25/FVP_Base_RevC-2xAEMvA_11.25_15_Linux64.tgz
+- https://developer.arm.com/-/media/Files/downloads/ecosystem-models/FM_11_25/FVP_Base_RevC-2xAEMvA_11.25_15_Linux64_armv8l.tgz

 The FVP will be located under one of the corresponding folders:

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  b28daf4ac17e43156363078bf510297584137f6df50fced9b12df34f61a92fb0  u-boot-2024.10.tar.bz2
+sha256  f591da9ab90ef3d6b3d173766d0ddff90c4ed7330680897486117df390d83c8f  u-boot-2024.07.tar.bz2
@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  c0f23ccc71c49989e9ad238acf334473c17b7c88f79a20c829c3d443e3794a22  arm-trusted-firmware-v2.11-git4.tar.gz
+sha256  7efa89e1b4e4106ee05d68e876c8efbb146364d89cfd5d26bf4647b09c08f32b  arm-trusted-firmware-v2.10-git4.tar.gz
@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  774698422ee54c5f1e704456f37c65c06b51b4e9a8b0866f34580d86fef8e226  linux-6.10.tar.xz
+sha256  24fa01fb989c7a3e28453f117799168713766e119c5381dac30115f18f268149  linux-6.9.tar.xz
@@ -1 +0,0 @@
-../uboot/uboot.hash
@@ -0,0 +1,2 @@
+# Locally calculated
+sha256  18a853fe39fad7ad03a90cc2d4275aeaed6da69735defac3492b80508843dd4a  u-boot-2024.04.tar.bz2
@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  f591da9ab90ef3d6b3d173766d0ddff90c4ed7330680897486117df390d83c8f  u-boot-2024.07.tar.bz2
+sha256  18a853fe39fad7ad03a90cc2d4275aeaed6da69735defac3492b80508843dd4a  u-boot-2024.04.tar.bz2
@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  7bd234a93bc6351d6a830f9ef18e9e780d70c478d280a6513a30bc2f945fb050  linux-linux4microchip+fpga-2024.09.1.tar.gz
+sha256  dcb7b41fd363729675c34545fcb514d5a94dbb3714ee10f527a26ca7716c2579  linux-linux4microchip+fpga-2024.06.tar.gz
@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  a2fad7fe7f933fa4679b070e952e1e7a21dbd8b586d7a9a11bfcb99e75ae7ad6  uboot-linux4microchip+fpga-2024.09.tar.gz
+sha256  d461c45a9c5acd019776cdcf8ab2b571315282a880dd6580431f7dd5bfac3889  uboot-linux4microchip+fpga-2024.06.tar.gz
@@ -0,0 +1 @@
+/sbin/init
@@ -11,7 +11,7 @@
 # When the kernel is directly booted, devtmpfs is not automatically mounted.
 # Manually mount it if needed.
 devmnt=$(mount | grep -c devtmpfs)
-if [ "${devmnt}" -eq 0 ]; then
+if [ ${devmnt} -eq 0 ]; then
    /bin/mount -t devtmpfs devtmpfs /dev
 fi

@@ -28,5 +28,14 @@ fi
 # Clear memory to reduce page fragmentation
 echo 3 > /proc/sys/vm/drop_caches

+# Print a fun logo :)
+echo "          __  _"
+echo "         / / (_) ____   _   _ __  __"
+echo "        / /  | ||  _ \\ | | | |\\ \\/ /"
+echo "       / /___| || | | || |_| | >  < "
+echo "      /_____/|_||_| |_| \\____|/_/\\_\\"
+echo "    64-bits RISC-V Kendryte K210 NOMMU"
+echo ""
+
 # Finally, let's start an interactive shell
 exec /bin/sh
@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  c954f60197008f1e1f32a1e77293903cf3801d2543ec4bf521f5651eb7f133ce  linux-6.11.6.tar.xz
+sha256  19b31956d229b5b9ca5671fa1c74320179682a3d8d00fc86794114b21da86039  linux-6.8.12.tar.xz
@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  b28daf4ac17e43156363078bf510297584137f6df50fced9b12df34f61a92fb0  u-boot-2024.10.tar.bz2
+sha256  18a853fe39fad7ad03a90cc2d4275aeaed6da69735defac3492b80508843dd4a  u-boot-2024.04.tar.bz2
@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  4f4dc78bfb5b7391a65ae0f83856661071f666ac2bf6a9380fddbe376a8bdaaa  atf-lf-6.6.23-2.0.0.tar.gz
+sha256  0dda154c335e1a50c727601e698b6a0827e3f92308873b373449fb888df5acfd  atf-LSDK-21.08.tar.gz
@@ -1,2 +1,2 @@
 # Locally computed
-sha256  6d592722e004516309f8ce33e654f1322e4d1f0f33567acb86ca19229176fd9e  linux-lf-6.6.23-2.0.0.tar.gz
+sha256  6db58cf91b98f7fc279f341279a5d43d4069fb56a660a34209aba6af53ea2b57  linux-LSDK-21.08.tar.gz
@@ -1,2 +1,2 @@
 # Locally computed
-sha256  a2bcd7a34d4908ffbadfea731d0f0fd20f19a31cff6ff6310980e7f6743ceb24  u-boot-lf-6.6.23-2.0.0.tar.gz
+sha256  6279c161ad8a218b549e6631be969b74f358cf01a20103953ccaf3bb14185ac2  u-boot-LSDK-21.08.tar.gz
@@ -12,11 +12,11 @@ for the software NXP LSDK (Layerscape Software Development Kit), see
  - https://www.nxp.com/docs/en/user-guide/LSDKUG_Rev21.08.pdf

 the components from NXP are:
-  - rcw, lf-6.6.23-2.0.0
-  - atf (fork), lf-6.6.23-2.0.0
-  - uboot (fork), lf-6.6.23-2.0.0
+  - rcw, LSDK 21.08
+  - atf (fork), LSDK 21.08
+  - uboot (fork), LSDK 21.08
  - cadence-dp-firmware (blob), LSDK 20.12
-  - linux (fork), lf-6.6.23-2.0.0
+  - linux (fork), LSDK 21.08

 Build
 =====
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  4f4dc78bfb5b7391a65ae0f83856661071f666ac2bf6a9380fddbe376a8bdaaa  atf-lf-6.6.23-2.0.0.tar.gz
@@ -1 +0,0 @@
-../linux/linux.hash
@@ -1,2 +0,0 @@
-# Locally computed
-sha256  6d592722e004516309f8ce33e654f1322e4d1f0f33567acb86ca19229176fd9e  linux-lf-6.6.23-2.0.0.tar.gz
@@ -1,2 +0,0 @@
-# Locally computed
-sha256  a2bcd7a34d4908ffbadfea731d0f0fd20f19a31cff6ff6310980e7f6743ceb24  u-boot-lf-6.6.23-2.0.0.tar.gz
@@ -13,11 +13,11 @@ for the software NXP LSDK (Layerscape Software Development Kit), see
  - https://www.nxp.com/docs/en/user-guide/LSDKUG_Rev21.08.pdf

 the components from NXP are:
-  - rcw, lf-6.6.23-2.0.0
-  - atf (fork), lf-6.6.23-2.0.0
-  - uboot (fork), lf-6.6.23-2.0.0
-  - qoriq-fm-ucode (blob), lf-6.6.23-2.0.0
-  - linux (fork), lf-6.6.23-2.0.0
+  - rcw, LSDK 21.08
+  - atf (fork), LSDK 21.08
+  - uboot (fork), LSDK 21.08
+  - qoriq-fm-ucode (blob), LSDK 21.08
+  - linux (fork), LSDK 21.08

 Build
 =====
@@ -1,4 +0,0 @@
-label NanoPi NEO linux
-  kernel /boot/zImage
-  devicetree /boot/sun8i-h3-nanopi-neo.dtb
-  append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p1 rootwait panic=10
@@ -1,17 +0,0 @@
-# Minimal SD card image for the NanoPi NEO.
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot {
-		in-partition-table = false
-		image = "u-boot-sunxi-with-spl.bin"
-		offset = 8K
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		offset = 1M
-	}
-}
@@ -1 +0,0 @@
-../linux/linux.hash
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  93218296934915636fe6ba08e125948424cc270fd8948502c0ab91087a9fccd8  linux-6.6.44.tar.xz
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname "$0")"
-
-install -m 0644 -D "$BOARD_DIR"/extlinux.conf "$TARGET_DIR"/boot/extlinux/extlinux.conf
@@ -1,41 +0,0 @@
-Nanopi NEO
-
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the NanoPi NEO. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-FriendlyARM Nanopi NEO link:
-https://wiki.friendlyelec.com/wiki/index.php/NanoPi_NEO
-
-How to build
-============
-
-    $ make friendlyarm_nanopi_neo_defconfig
-    $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
-  $ sudo sync
-
-Insert the micro SD card in your Nanopi NEO and power it up. The console
-is on the debug TTL UART, 115200 8N1.
-
-Ethernet
-==========
-
-  # udhcpc -i eth0
-
-Enjoy!
@@ -1 +0,0 @@
-../linux/linux.hash
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  f74812f78e88992c416434cb107639e13a551dbaff36bb90d6346ab16ab71a95  linux-6.6.56.tar.xz
@@ -1,48 +0,0 @@
-From 3cdf8aa3ff45e35a237285c107785bc3d2c6976a Mon Sep 17 00:00:00 2001
-From: Ludwig Kormann <ludwig.kormann@ict42.de>
-Date: Wed, 31 Jan 2024 11:28:19 +0100
-Subject: [PATCH] sunxi: sun4i: Reduce cpu clock at SPL initialization to 144
- MHz
-
-Up until now cpu clock gets initialized at 384 MHz, which is
-the highest supported cpu clock.
-
-Recent A20 batches show an increased percentage of modules
-reacting very sensitive to operating conditions outside the
-specifications.
-
-The cpu dies very shortly after PLLs, core frequency or cpu
-voltage are missconfigured. E.g.:
- uboot SPL selects 384 MHz as cpu clock which requires a cpu
-  voltage of at least 1.1 V.
- Linux CPU Frequency scaling with most sun7i dts will reduce
-  cpu voltage down to 1.0 V.
- When intiating a reboot or reset from linux the cpu voltage
-  may keep the 1.0 V configuration and the cpu dies during SPL
-  initialization.
-
-Therefore reduce cpu clock at uboot SPL initialization down
-to 144 MHz from 384 MHz.
-
-Signed-off-by: Ludwig Kormann <ludwig.kormann@ict42.de>
-Upstream: Not Applicable
---
- arch/arm/include/asm/arch-sunxi/clock_sun4i.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h
-index 2cec91cb20..252c4c693e 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h
-+++ b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h
-@@ -141,7 +141,7 @@ struct sunxi_ccm_reg {
- #define CCM_PLL1_CFG_SIG_DELT_PAT_EN_SHIFT	2
- #define CCM_PLL1_CFG_FACTOR_M_SHIFT		0
- 
-#define PLL1_CFG_DEFAULT	0xa1005000
-+#define PLL1_CFG_DEFAULT	0xa1004c01
- 
- #if defined CONFIG_OLD_SUNXI_KERNEL_COMPAT && defined CONFIG_MACH_SUN5I
- /*
-- 
-2.39.2
-
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  b28daf4ac17e43156363078bf510297584137f6df50fced9b12df34f61a92fb0  u-boot-2024.10.tar.bz2
@@ -3,7 +3,7 @@ set -e
 DEVICE_TYPE="buildroot-x86_64"
 ARTIFACT_NAME="1.0"

-parse_args() {
+function parse_args {
    local o O opts
    o='a:o:d:'
    O='artifact-name:,data-part-size:,device-type:'
@@ -28,8 +28,8 @@ parse_args() {
    done
 }

-# Create a persistent directory to mount the data partition at.
-mender_fixup() {
+  # Create a persistent directory to mount the data partition at.
+function mender_fixup {
    pushd "${TARGET_DIR}"
    if [[ -L var/lib/mender ]]; then
        rm var/lib/mender
@@ -44,7 +44,7 @@ mender_fixup() {
    popd
 }

-main() {
+function main {
    parse_args "${@}"
    mender_fixup
    echo "device_type=${DEVICE_TYPE}" > "${TARGET_DIR}/etc/mender/device_type"
@@ -5,8 +5,9 @@ DATA_PART_SIZE="32M"
 DEVICE_TYPE="buildroot-x86_64"
 ARTIFACT_NAME="1.0"

+
 # Parse arguments.
-parse_args() {
+function parse_args {
    local o O opts
    o='a:o:d:'
    O='artifact-name:,data-part-size:,device-type:'
@@ -31,7 +32,7 @@ parse_args() {
 }

 # Create the data partition
-make_data_partition() {
+function make_data_partition {
    "${HOST_DIR}/sbin/mkfs.ext4" \
        -F \
        -r 1 \
@@ -41,8 +42,9 @@ make_data_partition() {
        "${BINARIES_DIR}/data-part.ext4" "${DATA_PART_SIZE}"
 }

+
 # Create a mender image.
-generate_mender_image() {
+function generate_mender_image {
    echo "Creating ${BINARIES_DIR}/${DEVICE_TYPE}-${ARTIFACT_NAME}.mender"
    "${HOST_DIR}/bin/mender-artifact" \
        --compression lzma \
@@ -53,12 +55,13 @@ generate_mender_image() {
        -o "${BINARIES_DIR}/${DEVICE_TYPE}-${ARTIFACT_NAME}.mender"
 }

-generate_image() {
-    support/scripts/genimage.sh -c "${BOARD_DIR}/genimage-efi.cfg"
+
+function generate_image {
+    sh support/scripts/genimage.sh -c "${BOARD_DIR}/genimage-efi.cfg"
 }

 # Main function.
-main() {
+function main {
    parse_args "${@}"
    make_data_partition
    generate_image
@@ -1,163 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_TASKSTATS=y
-CONFIG_MEMCG=y
-CONFIG_BLK_CGROUP=y
-CONFIG_CPUSETS=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_SCHED_AUTOGROUP=y
-CONFIG_PROFILING=y
-CONFIG_ARCH_VEXPRESS=y
-CONFIG_COMPAT=y
-CONFIG_ACPI=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_BLK_DEV_BSGLIB=y
-CONFIG_BINFMT_MISC=y
-CONFIG_TRANSPARENT_HUGEPAGE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_PACKET_DIAG=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_BRIDGE=y
-CONFIG_NET_SCHED=y
-CONFIG_VSOCKETS=y
-CONFIG_PCI=y
-CONFIG_PCI_HOST_GENERIC=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_FW_CFG_SYSFS=y
-CONFIG_FW_CFG_SYSFS_CMDLINE=y
-CONFIG_VIRTIO_BLK=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_VIRTIO=y
-CONFIG_ATA=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_MACVLAN=y
-CONFIG_VIRTIO_NET=y
-CONFIG_NLMON=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_VIRTIO_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_VIRTIO=y
-CONFIG_TCG_TPM=y
-CONFIG_TCG_TIS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PL031=y
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_INPUT=y
-CONFIG_VIRTIO_MMIO=y
-CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
-CONFIG_MAILBOX=y
-CONFIG_PL320_MBOX=y
-CONFIG_ARM_SMMU_V3=y
-CONFIG_EXT4_FS=y
-CONFIG_FUSE_FS=y
-CONFIG_VIRTIO_FS=y
-CONFIG_OVERLAY_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_RAS=y
-CONFIG_EDAC=y
-CONFIG_EDAC_LEGACY_SYSFS=y
-CONFIG_EDAC_BLUEFIELD=y
-CONFIG_I2C=y
-CONFIG_MELLANOX_PLATFORM=y
-CONFIG_REGMAP_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_GPIO_MLXBF2=y
-CONFIG_GPIO_MLXBF3=y
-CONFIG_GPIO_MLXBF=y
-CONFIG_I2C_MLXBF=y
-CONFIG_I2C_MLXCPLD=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_MLXCPLD=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_MLXCPLD=y
-CONFIG_LEDS_MLXREG=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_MLX5_BRIDGE=y
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_TC_SKB_EXT=y
-CONFIG_CONFIG_NET_CLS_ACT=y
-CONFIG_MLX5_CLS_ACT=y
-CONFIG_DCB=y
-CONFIG_MLX5_CORE_EN_DCB=y
-CONFIG_MLX5_CORE_EN=y
-CONFIG_MLX5_CORE=y
-CONFIG_MLX5_DPLL=y
-CONFIG_MLX5_EN_ARFS=y
-CONFIG_INET_ESP=y
-CONFIG_INET6_ESP=y
-CONFIG_XFRM_OFFLOAD=y
-CONFIG_INET_ESP_OFFLOAD=y
-CONFIG_INET6_ESP_OFFLOAD=y
-CONFIG_MLX5_EN_IPSEC=y
-CONFIG_MLX5_EN_RXNFC=y
-CONFIG_TLS_DEVICE=y
-CONFIG_TLS=y
-CONFIG_MLX5_EN_TLS=y
-CONFIG_MLX5_ESWITCH=y
-CONFIG_MLX5_FPGA_IPSEC=y
-CONFIG_MLX5_FPGA_TLS=y
-CONFIG_MLX5_FPGA=y
-CONFIG_MLX5_IPSEC=y
-CONFIG_MACSEC=y
-CONFIG_MLX5_MACSEC=y
-CONFIG_MLX5_MPFS=y
-CONFIG_MLX5_SF_MANAGER=y
-CONFIG_MLX5_SF=y
-CONFIG_MLX5_SW_STEERING=y
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_INGRESS=y
-CONFIG_NF_CONNTRACK=y
-CONFIG_NF_TABLES=y
-CONFIG_NF_FLOW_TABLE=y
-CONFIG_NET_ACT_CT=y
-CONFIG_MLX5_TC_CT=y
-CONFIG_MLX5_TC_SAMPLE=y
-CONFIG_MLX5_TLS=y
-CONFIG_VDPA=y
-CONFIG_VHOST_IOTLB=y
-CONFIG_MLX5_VDPA_NET=y
-CONFIG_MLX5_VDPA_STEERING_DEBUG=y
-CONFIG_MLX5_VDPA=y
-CONFIG_IOMMUFD=y
-CONFIG_IOMMU_SUPPORT=y
-CONFIG_VFIO=y
-CONFIG_MLX5_VFIO_PCI=y
-CONFIG_MLXBF_BOOTCTL=y
-CONFIG_MLXBF_GIGE=y
-CONFIG_MLXBF_PMC=y
-CONFIG_MLXBF_TMFIFO=y
-CONFIG_MLXFW=y
-CONFIG_MLXREG_HOTPLUG=y
-CONFIG_MLXREG_IO=y
-CONFIG_WATCHDOG=y
-CONFIG_MLX_WDT=y
-CONFIG_MMC=y
-CONFIG_MMC_DW=y
-CONFIG_MMC_DW_BLUEFIELD=y
-CONFIG_NET_VENDOR_MELLANOX=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_MLXBF3=y
-CONFIG_POWER_MLXBF=y
-CONFIG_SENSORS_MLXREG_FAN=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_RD_GZIP=y
-CONFIG_INITRAMFS_COMPRESSION_GZIP=y
@@ -1 +0,0 @@
-../linux/linux.hash
@@ -1,4 +0,0 @@
-# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc
-# After checking with pgp with using key
-# B8868C80BA62A1FFFAF5FDA9632D3A06589DA6B1
-sha256  c954f60197008f1e1f32a1e77293903cf3801d2543ec4bf521f5651eb7f133ce  linux-6.11.6.tar.xz
@@ -1,70 +0,0 @@
-*****************
-BlueField 3 Board
-*****************
-
-The BlueField 3 board is provided "as-is" without official support
-from NVIDIA.
-
-For a detailed description of this board, please refer to the official
-website:
-https://www.nvidia.com/en-us/networking/products/data-processing-unit/
-
-
-Missing Kernel Modules
-======================
-
-Please note that the following kernel modules are unavailable as they
-are not included in the Linux upstream repository:
-  - CONFIG_MLXBF_PTM (module: mlxbf-ptm)
-  - CONFIG_MLXBF_PKA (module: mlxbf-pka)
-
-For further details on these kernel modules and their usage, please
-refer to the NVIDIA documentation:
-https://docs.nvidia.com/networking/display/bluefielddpuosv470/installing+popular+linux+distributions+on+bluefield
-
-
-Boot loader
-===========
-
-NVIDIA does not provide information for rebuilding the ARM BL1, BL2,
-BL3, UEFI, or other components in the boot stages. Therefore, we
-assume the BF3 board is already running the pre-built Ubuntu image
-provided in the BFB installation format.
-
-Since there are no available details on the BF3's BFB format or the
-ARM Trusted Firmware (ATF) needed to rebuild BL1, BL2, BL3, UEFI, or
-GRUB, these components are assumed to remain unmodified.
-
-
-Grub Configuration and Image Loading
-====================================
-
-The board's image is loaded from the BF3's GRUB, with the following
-GRUB settings, assuming the console is set to `hvc0` to provide access
-thru `/dev/rshimN/console` from the root CPU since the root CPU's
-rshim exposes a virtio console over the PCIe bus to the BR3 board.
-
-To update GRUB settings, boot using the built-in BF3 Ubuntu image.
-
-Extract of /etc/default/grub:
-
-    GRUB_DEFAULT=0
-    GRUB_TIMEOUT_STYLE=menu
-    GRUB_TIMEOUT=-1
-    GRUB_RECORDFAIL_TIMEOUT=5
-    GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
-    GRUB_CMDLINE_LINUX_DEFAULT=""
-    GRUB_CMDLINE_LINUX="console=hvc0 earlyprintk=hvc0 earlycon=hvc0 loglevel=7 fixrtc net.ifnames=0 biosdevname=0 iommu.passthrough=1"
-
-
-Uploading Buildroot Images
--------------------------
-
-After configuring GRUB, you can upload your Buildroot images to the
-BF3’s GRUB boot folder:
-
-    scp build_folder/images/Image BF3:/boot/vmlinuz-buildroot-xyz
-
-Finally, run `update-grub` on the BF3 board to apply the updated GRUB settings.
-
-Enjoy!
@@ -1,2 +1,2 @@
 # Locally computed
-sha256  5fae869d6a24055c16ffc2d92669e3fb2b258e34d36c850bb8cf9def417ecfa0  linux-6.6.54.tar.xz
+sha256  b9676828b737e8fb8eaa5198303d35d35e8df019550be153c8a42c99afe0cdd5  linux-6.6.36.tar.xz
@@ -1,2 +1,2 @@
 # Locally computed
-sha256  b28daf4ac17e43156363078bf510297584137f6df50fced9b12df34f61a92fb0  u-boot-2024.10.tar.bz2
+sha256  f591da9ab90ef3d6b3d173766d0ddff90c4ed7330680897486117df390d83c8f  u-boot-2024.07.tar.bz2
@@ -42,8 +42,8 @@ Emulation in qemu (BIOS)
 1. Edit grub-bios.cfg

  Since the driver will show up in the virtual machine as /dev/vda,
-  change board/pc/grub-bios.cfg to use root=/dev/vda1 instead of
-  root=/dev/sda1. Then rebuild grub2 and the image.
+  change board/pc/grub-bios.cfg to use root=/dev/vda2 instead of
+  root=/dev/sda2. Then rebuild grub2 and the image.

 2. Run the emulation with:

@@ -14,17 +14,23 @@ image sdcard.img {
 	hdimage {
 	}

+	partition spl {
+		in-partition-table = "no"
+		image = "sunxi-spl.bin"
+		offset = 8K
+	}
+
 	partition u-boot {
 		in-partition-table = "no"
-		image = "u-boot-sunxi-with-spl.bin"
-		offset = 8K
+		image = "u-boot.itb"
+		offset = 40K
+		size = 1M # 1MB - 40KB
 	}

 	partition boot {
 		partition-type = 0xC
 		bootable = "true"
 		image = "boot.vfat"
-		offset = 1M
 	}

 	partition rootfs {
@@ -1 +0,0 @@
-../linux/linux.hash
@@ -1,2 +0,0 @@
-# From https://cdn.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc
-sha256  55e5bcbc68d66776fc46896291f0a24844beb57817345a854d65e3d055fa423e  linux-6.10.14.tar.xz
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  b28daf4ac17e43156363078bf510297584137f6df50fced9b12df34f61a92fb0  u-boot-2024.10.tar.bz2
@@ -1,5 +1,5 @@
 #!/bin/sh

-BOARD_DIR=$(dirname "$0")
+BOARD_DIR="$(dirname $0)"

-install -m 0644 -D "$BOARD_DIR/extlinux.conf" "$BINARIES_DIR/extlinux/extlinux.conf"
+install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
@@ -17,7 +17,7 @@ Run the emulation with:

  qemu-system-aarch64 \
    -M sbsa-ref \
-    -cpu neoverse-n1 \
+    -cpu cortex-a57 \
    -smp 4 \
    -m 1024 \
    -nographic \
@@ -0,0 +1,3 @@
+# Embed the DTB in the kernel image
+CONFIG_NIOS2_DTB_SOURCE_BOOL=y
+CONFIG_NIOS2_DTB_SOURCE="10m50_devboard.dts"
@@ -0,0 +1,5 @@
+Run the emulation with:
+
+  qemu-system-nios2 -kernel output/images/vmlinux -nographic # qemu_nios2_10m50_defconfig
+
+The login prompt will appear in the terminal that started Qemu.
@@ -1,4 +1,3 @@
 # Locally computed:
 sha256  c9f0d0bf967d690edbf34b621728a6271856f2e26ed46081a285b6d627a358c5  arm-trusted-firmware-v2.7-git4.tar.gz
 sha256  7efa89e1b4e4106ee05d68e876c8efbb146364d89cfd5d26bf4647b09c08f32b  arm-trusted-firmware-v2.10-git4.tar.gz
-sha256  c0f23ccc71c49989e9ad238acf334473c17b7c88f79a20c829c3d443e3794a22  arm-trusted-firmware-v2.11-git4.tar.gz
@@ -1,7 +1,7 @@
 Run Linux in emulation with:

-  qemu-system-riscv32 -M virt -bios output/images/fw_jump.elf -kernel output/images/Image -append "rootwait root=/dev/vda ro" -drive file=output/images/rootfs.ext2,format=raw -netdev user,id=net0 -device virtio-net-device,netdev=net0 -nographic # qemu_riscv32_virt_defconfig
+  qemu-system-riscv32 -M virt -bios output/images/fw_jump.elf -kernel output/images/Image -append "rootwait root=/dev/vda ro" -drive file=output/images/rootfs.ext2,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 -netdev user,id=net0 -device virtio-net-device,netdev=net0 -nographic # qemu_riscv32_virt_defconfig

-  qemu-system-riscv32 -M virt -bios none -kernel output/images/Image -append "rootwait root=/dev/vda ro" -drive file=output/images/rootfs.ext2,format=raw,id=hd0,if=none -device virtio-blk-device,drive=hd0 -nographic -cpu rv32,mmu=off -netdev user,id=eth0 -device virtio-net-device,netdev=eth0 # qemu_riscv32_nommu_virt_defconfig
+  qemu-system-riscv32 -M virt -bios none -kernel output/images/Image -append "rootwait root=/dev/vda ro" -drive file=output/images/rootfs.ext2,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 -nographic -cpu rv32,mmu=off -netdev user,id=eth0 -device virtio-net-device,netdev=eth0 # qemu_riscv32_nommu_virt_defconfig

 The login prompt will appear in the terminal that started Qemu.
@@ -22,7 +22,8 @@ Run the emulation with:
        -blockdev node-name=pflash0,driver=file,read-only=on,filename=output/images/RISCV_VIRT_CODE.fd \
        -blockdev node-name=pflash1,driver=file,filename=output/images/RISCV_VIRT_VARS.fd \
        \
-        -drive file=output/images/disk.img,format=raw \
+        -drive file=output/images/disk.img,format=raw,id=hd0 \
+        -device virtio-blk-device,drive=hd0 \
        \
        -netdev user,id=net0 \
        -device virtio-net-device,netdev=net0 # qemu_riscv64_virt_efi_defconfig
@@ -1,7 +1,7 @@
 Run Linux in emulation with:

-  qemu-system-riscv64 -M virt -bios output/images/fw_jump.elf -kernel output/images/Image -append "rootwait root=/dev/vda ro" -drive file=output/images/rootfs.ext2,format=raw -netdev user,id=net0 -device virtio-net-device,netdev=net0 -nographic # qemu_riscv64_virt_defconfig
+  qemu-system-riscv64 -M virt -bios output/images/fw_jump.elf -kernel output/images/Image -append "rootwait root=/dev/vda ro" -drive file=output/images/rootfs.ext2,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 -netdev user,id=net0 -device virtio-net-device,netdev=net0 -nographic # qemu_riscv64_virt_defconfig

-  qemu-system-riscv64 -M virt -bios none -kernel output/images/Image -append "rootwait root=/dev/vda ro" -drive file=output/images/rootfs.ext2,format=raw,id=hd0,if=none -device virtio-blk-device,drive=hd0 -nographic -cpu rv64,mmu=off -netdev user,id=net0 -device virtio-net-device,netdev=net0 # qemu_riscv64_nommu_virt_defconfig
+  qemu-system-riscv64 -M virt -bios none -kernel output/images/Image -append "rootwait root=/dev/vda ro" -drive file=output/images/rootfs.ext2,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 -nographic -cpu rv64,mmu=off -netdev user,id=net0 -device virtio-net-device,netdev=net0 # qemu_riscv64_nommu_virt_defconfig

 The login prompt will appear in the terminal that started Qemu.
@@ -1,4 +1,4 @@
 label Radxa Rock 5b Linux
  kernel /boot/Image
  devicetree /boot/rk3588-rock-5b.dtb
-  append root=PARTLABEL=rootfs earlycon rootwait
+  append root=/dev/mmcblk1p1 rw rootfstype=ext4 earlycon rootwait
@@ -2,7 +2,7 @@

 image sdcard.img {
 	hdimage {
-		partition-table-type = "gpt"
+		partition-table-type = "hybrid"
 	}

 	partition uboot {
@@ -11,15 +11,8 @@ image sdcard.img {
 		offset = 32K
 	}

-	partition uboot-env {
-		partition-type-uuid = 3de21764-95bd-54bd-a5c3-4abe786f38a8
-		offset = 16M
-		size = 64K
-	}
-
 	partition rootfs {
-		partition-type-uuid = L
+		partition-type = 0x83
 		image = "rootfs.ext2"
-		bootable = true
 	}
 }
@@ -1,2 +1,2 @@
-# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc
-sha256  057263d0afc17d5253794afd3d239ba4da4aa734b22fa36c1665f41b95449b73  linux-6.11.3.tar.xz
+# Locally calculated
+sha256  f68d9f5ffc0a24f850699b86c8aea8b8687de7384158d5ed3bede37de098d60c  linux-6.7.4.tar.xz
@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  b28daf4ac17e43156363078bf510297584137f6df50fced9b12df34f61a92fb0  u-boot-2024.10.tar.bz2
+sha256  b99611f1ed237bf3541bdc8434b68c96a6e05967061f992443cb30aabebef5b3  u-boot-2024.01.tar.bz2
@@ -1,5 +0,0 @@
-CONFIG_ENV_SIZE=0x10000
-CONFIG_PARTITION_TYPE_GUID=y
-# CONFIG_ENV_IS_NOWHERE is not set
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_MMC_ENV_DEV=1
@@ -4,7 +4,7 @@ image sdcard.img {

 	partition u-boot {
 		in-partition-table = "no"
-		image = "u-boot-with-spl.kwb"
+		image = "u-boot-spl.kwb"
 		offset = 512
 	}

@@ -1 +0,0 @@
-../linux/linux.hash
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  0ad83b1a1a780a1aad948d55aa55ee63c50c626f2d46910b9d2180028d100a5e  linux-6.6.43.tar.xz
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  f591da9ab90ef3d6b3d173766d0ddff90c4ed7330680897486117df390d83c8f  u-boot-2024.07.tar.bz2
@@ -22,7 +22,7 @@ main()
 	GENIMAGE_CFG="$(mktemp --suffix genimage.cfg)"

 	sed -e "s/%ATFBIN%/${ATFBIN}/" \
-		board/stmicroelectronics/common/stm32mp1xx/genimage.cfg.template > ${GENIMAGE_CFG}
+		board/stmicroelectronics/common/stm32mp157/genimage.cfg.template > ${GENIMAGE_CFG}

 	support/scripts/genimage.sh -c ${GENIMAGE_CFG}

@@ -1 +0,0 @@
-../linux/linux.hash
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  f591da9ab90ef3d6b3d173766d0ddff90c4ed7330680897486117df390d83c8f  u-boot-2024.07.tar.bz2
@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  8bd8de3562fb006653e550a934e66ed9f80b7576258a03e2caa2e3ce1c1f9f24  linux-6.1.112.tar.xz
+sha256  97cdc9127c7700556ea0891267a0c24cf372f4b81636fb8203a914f3a69f3406  linux-6.1.98.tar.xz
@@ -1,4 +1,4 @@
 label stm32f469-disco-buildroot
-  kernel /boot/zImage
-  devicetree /boot/stm32f469-disco.dtb
-  append console=ttySTM0,115200 root=/dev/mmcblk0p1 rw rootfstype=ext2 rootwait earlyprintk consoleblank=0 ignore_loglevel
+  kernel /zImage
+  devicetree /stm32f469-disco.dtb
+  append console=ttySTM0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext2 rootwait earlyprintk consoleblank=0 ignore_loglevel
@@ -1,7 +1,24 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"zImage",
+			"stm32f469-disco.dtb",
+			"extlinux"
+		}
+	}
+
+	size = 16M
+}
+
 image sdcard.img {
 	hdimage {
 	}

+	partition u-boot {
+		partition-type = 0xC
+		image = "boot.vfat"
+	}
+
 	partition rootfs {
 		partition-type = 0x83
 		image = "rootfs.ext2"
@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  b1751f18ece3df08d502dd87a9ab1a317dc0f9486355bf8ee62ba6af0b35da30  linux-5.15.167.tar.xz
+sha256  91bfc0ea152ce7b102a0b79d35a7c92843874ebf085c99d2ba8b4d85e62b1a7c  linux-5.15.162.tar.xz
@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  b28daf4ac17e43156363078bf510297584137f6df50fced9b12df34f61a92fb0  u-boot-2024.10.tar.bz2
+sha256  f591da9ab90ef3d6b3d173766d0ddff90c4ed7330680897486117df390d83c8f  u-boot-2024.07.tar.bz2
@@ -1,4 +1,4 @@
 #!/bin/sh
-BOARD_DIR="$(dirname "$0")"
+BOARD_DIR="$(dirname $0)"

-install -m 0644 -D "${BOARD_DIR}"/extlinux.conf "${TARGET_DIR}"/boot/extlinux/extlinux.conf
+install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
@@ -1,4 +0,0 @@
-label stm32f746-disco-buildroot
-  kernel /boot/zImage
-  devicetree /boot/stm32f746-disco.dtb
-  append console=ttySTM0,115200 root=/dev/mmcblk0p1 rw rootwait consoleblank=0 ignore_loglevel
@@ -1,22 +0,0 @@
-#!/bin/bash
-
-if [ $# -eq 0 ]; then
-    OUTPUT_DIR=output
-else
-    OUTPUT_DIR=$1
-fi
-
-if ! test -d "${OUTPUT_DIR}" ; then
-    echo "ERROR: no output directory specified."
-    echo "Usage: $0 OUTPUT_DIR"
-    exit 1
-fi
-
-"${OUTPUT_DIR}"/host/bin/openocd -f board/stm32f746g-disco.cfg \
-    -c "init" \
-    -c "reset init" \
-    -c "flash probe 0" \
-    -c "flash info 0" \
-    -c "flash write_image erase ${OUTPUT_DIR}/images/u-boot.bin 0x08000000" \
-    -c "reset run" \
-    -c "shutdown"
@@ -1,10 +0,0 @@
-image sdcard.img {
-	hdimage {
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext2"
-		size = 32M
-	}
-}
@@ -1,13 +0,0 @@
-# CONFIG_PREEMPT is not set
-# CONFIG_MULTIUSER is not set
-# CONFIG_TIMERFD is not set
-CONFIG_SET_MEM_PARAM=y
-CONFIG_DRAM_BASE=0xC0000000
-CONFIG_DRAM_SIZE=0x01000000
-# CONFIG_GCC_PLUGINS is not set
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_PROC_SYSCTL is not set
-# CONFIG_CRYPTO is not set
-CONFIG_RCU_TRACE=y
@@ -1 +0,0 @@
-../linux/linux.hash
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  b1751f18ece3df08d502dd87a9ab1a317dc0f9486355bf8ee62ba6af0b35da30  linux-5.15.167.tar.xz
--- a/Show More
+++ b/Show More