Update for 2023.05.1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

.checkpackageignore

@@ -99,6 +99,9 @@ board/technologic/ts4900/post-image.sh Shellcheck
 board/toradex/apalis-imx6/post-image.sh Shellcheck
 board/udoo/common/post-build.sh Shellcheck
 board/udoo/mx6qdl/patches/linux/0000-udoo-disable-usbh1.patch Upstream
+board/versal/post-build.sh Shellcheck
+board/versal/post-image.sh Shellcheck TrailingSpace
+board/zynqmp/kria/patches/uboot/v1-0001-makefile-add-multi_dtb_fit-dep.patch ApplyOrder Upstream
 boot/afboot-stm32/0003-Makefile-disable-stack-protector.patch Upstream
 boot/at91bootstrap/0001-eabi-fix.patch Upstream
 boot/at91bootstrap/0002-gcc-4.6.x-ldscript-fix.patch Upstream
@@ -106,6 +109,12 @@ boot/at91bootstrap/0003-u-boot-relocation-fix.patch Upstream
 boot/at91dataflashboot/0001-do-not-install.patch Upstream
 boot/at91dataflashboot/0002-eabi-fixes.patch Upstream
 boot/grub2/0001-Makefile-Make-grub_fstest.pp-depend-on-config-util.h.patch Upstream
+boot/grub2/0002-grub-mkconfig-Restore-umask-for-the-grub.cfg.patch Upstream
+boot/lpc32xxcdl/0001-compiler_name.patch Upstream
+boot/lpc32xxcdl/0002-delete_redundant_files.patch Upstream
+boot/lpc32xxcdl/0003-libnosys_gnu.patch Upstream
+boot/lpc32xxcdl/0004-slashes.patch Upstream
+boot/mv-ddr-marvell/0001-Makefile-disable-stack-protection.patch Upstream
 boot/optee-os/3.13.0/0001-core-zlib-fix-build-warning-when-_LFS64_LARGEFILE-is.patch Upstream
 boot/syslinux/0001-bios-Fix-alignment-change-with-gcc-5.patch Upstream
 boot/syslinux/0002-Disable-PIE-to-avoid-FTBFS-on-amd64.patch Upstream
@@ -124,7 +133,10 @@ boot/syslinux/0017-Replace-builtin-strlen-that-appears-to-get-optimized.patch Up
 linux/5.10.162-cip24-rt10/0001-arch-microblaze-mm-init.c-fix-build.patch Upstream
 package/18xx-ti-utils/0001-plt.h-fix-build-with-gcc-10.patch Upstream
 package/4th/0001-avoid-regen-during-install.patch Upstream
+package/ace/0001-ACE-ace-SSL-SSL_Asynch_BIO.cpp-fix-build-with-libres.patch Upstream
+package/ace/0002-ACE-ace-SSL-SSL_Asynch_BIO.cpp-fix-build-with-libres.patch Upstream
 package/acl/0001-Build-with-old-GCC-versions.patch Upstream
+package/acpica/0001-build-do-not-use-Werror.patch Upstream
 package/acpid/0001-dont-use-isfdtype.patch Upstream
 package/alchemy/0001-toolchains-remove-hash-style-management.patch Upstream
 package/alsamixergui/0001-misc-fixes.patch Sob Upstream
@@ -202,6 +214,18 @@ package/berkeleydb/0001-cwd-db_config.patch Upstream
 package/berkeleydb/0002-atomic_compare_exchange.patch Upstream
 package/bind/0001-cross.patch Upstream
 package/bind/S81named Indent Shellcheck Variables
+package/binutils/2.37/0001-sh-conf.patch Upstream
+package/binutils/2.37/0002-poison-system-directories.patch Upstream
+package/binutils/2.37/0003-bfd-elf32-or1k-fix-building-with-gcc-version-5.patch Upstream
+package/binutils/2.37/0004-or1k-fix-pc-relative-relocation-against-dynamic-on-P.patch Upstream
+package/binutils/2.37/0005-or1k-Avoid-R_OR1K_GOT16-signed-overflow-by-using-spe.patch Upstream
+package/binutils/2.37/0006-bfd-Close-the-file-descriptor-if-there-is-no-archive.patch Upstream
+package/binutils/2.37/0007-i386-Allow-GOT32-relocations-against-ABS-symbols.patch Upstream
+package/binutils/2.38/0001-sh-conf.patch Upstream
+package/binutils/2.38/0002-poison-system-directories.patch Upstream
+package/binutils/2.38/0003-bfd-elf32-or1k-fix-building-with-gcc-version-5.patch Upstream
+package/binutils/2.38/0004-or1k-Avoid-R_OR1K_GOT16-signed-overflow-by-using-spe.patch Upstream
+package/binutils/2.38/0005-binutils-2.38-vs.-ppc32-linux-kernel.patch Upstream
 package/binutils/2.39/0001-sh-conf.patch Upstream
 package/binutils/2.39/0002-poison-system-directories.patch Upstream
 package/binutils/2.39/0003-bfd-elf32-or1k-fix-building-with-gcc-version-5.patch Upstream
@@ -212,12 +236,16 @@ package/bmx7/0001-Fix-schedule.c-378-36-error-SIOCGSTAMP-undeclared.patch Upstre
 package/bmx7/0002-Fix-linking-error.patch Upstream
 package/bmx7/0003-Reorder-includes-to-avoid-ethhdr-collision.patch Upstream
 package/boinc/S99boinc-client Indent Shellcheck Variables
+package/bootgen/0001-Fix-build-on-machines-with-modern-flex.patch Upstream
 package/botan/0001-Add-superh-alias-needed-by-Debian.patch Upstream
 package/botan/0002-src-build-data-arch-superh.txt-add-sh4-eb-aeb.patch Upstream
 package/brickd/S70brickd Indent Shellcheck Variables
 package/bridge-utils/0001-fix-build-on-musl.patch Upstream
 package/brltty/0001-Fix-linking-error-on-mips64el.patch Upstream
+package/brltty/0002-shell-prologue-runProgramTerminationCommands-used-a-.patch Upstream
 package/brltty/S10brltty Indent Shellcheck Variables
+package/brotli/0001-CMake-Allow-using-BUILD_SHARED_LIBS-to-choose-static.patch Upstream
+package/brotli/0002-Revert-Add-runtime-linker-path-to-pkg-config-files.patch Upstream
 package/bsdiff/0001-Add-missing-header-for-u_char.patch Upstream
 package/bustle/0001-Makefile-fix-pcap-config-call.patch Upstream
 package/busybox/0001-networking-libiproute-use-linux-if_packet.h-instead-.patch Upstream
@@ -235,6 +263,7 @@ package/c-icap/0001-Required-fixes-to-compile-and-run-under-cygwin.patch Upstrea
 package/c-icap/S96cicap Indent Shellcheck Variables
 package/ca-certificates/0001-mozilla-certdata2pem.py-make-cryptography-module-opt.patch Upstream
 package/cache-calibrator/0001-Fix-conflicting-round-function.patch Upstream
+package/cage/0001-Upgrade-to-wlroots-0.15.patch Upstream
 package/cairo/0001-fix-nofork-build.patch Upstream
 package/cairo/0002-ft-Use-FT_Done_MM_Var-instead-of-free-when-available-in-cairo_ft_apply_variation.patch Upstream
 package/cairo/0003-_arc_max_angle_for_tolerance_normalized-fix-infinite.patch Upstream
@@ -252,9 +281,13 @@ package/cgroupfs-mount/S30cgroupfs Indent Shellcheck Variables
 package/chipmunk/0001-Fix-build-failure-on-musl.patch Upstream
 package/chocolate-doom/0001-Remove-redundant-demoextend-definition.patch Upstream
 package/chrony/S49chrony Indent Shellcheck Variables
+package/clang/0001-lib-Driver-ToolChains-Gnu-Use-GCC_INSTALL_PREFIX-in-.patch Upstream
 package/cmake/0001-rename-cmake-rootfile.patch Upstream
 package/cmocka/0001-Don-t-redefine-uintptr_t.patch Upstream
 package/collectd/0001-src-netlink.c-remove-REG_NOERROR.patch Upstream
+package/connman/0001-gweb-Fix-OOB-write-in-received_data.patch Upstream
+package/connman/0002-wispr-Add-reference-counter-to-portal-context.patch Upstream
+package/connman/0003-wispr-Update-portal-context-references.patch Upstream
 package/connman/S45connman Variables
 package/copas/0001-Do-not-load-coxpcall-for-LuaJIT.patch Upstream
 package/coremark-pro/coremark-pro.sh.in Shellcheck
@@ -327,7 +360,7 @@ package/dmalloc/0004-Makefile-use-the-configure-detected-or-user-supplied.patch
 package/dmalloc/0005-configure-use-LD-instead-of-hard-coding-ld.patch Upstream
 package/dmraid/0001-fix-compilation-under-musl.patch Upstream
 package/dmraid/S20dmraid Variables
-package/dnsmasq/S80dnsmasq Shellcheck
+package/dnsmasq/S80dnsmasq Shellcheck Variables
 package/docker-engine/S60dockerd Indent Shellcheck Variables
 package/docopt-cpp/0001-only-build-one-target-use-BUILD_SHARED_LIBS-where-appropriate.patch Upstream
 package/domoticz/S99domoticz Shellcheck
@@ -353,6 +386,7 @@ package/dvblast/0002-fix-int-types.patch Upstream
 package/dvbsnoop/0001-musl-types-h.patch Upstream
 package/dvdrw-tools/0001-limits.h.patch Upstream
 package/dvdrw-tools/0002-Include-sysmacros.h-to-compile-with-newer-gcc.patch Upstream
+package/e2fsprogs/0001-libext2fs-add-sanity-check-to-extent-manipulation.patch Upstream
 package/earlyoom/0001-main.c-fix-build-with-kernel-4.3.patch Upstream
 package/earlyoom/S02earlyoom Indent Shellcheck
 package/ebtables/0001-replace-ebtables-save-perl-script-with-bash.patch Upstream
@@ -374,6 +408,12 @@ package/ejabberd/0002-fix-ejabberdctl.patch Upstream
 package/ejabberd/0003-correct-includes.patch Upstream
 package/ejabberd/S50ejabberd Indent Shellcheck Variables
 package/ejabberd/check-erlang-lib Shellcheck
+package/elf2flt/0001-elf2flt-handle-binutils-2.34.patch Upstream
+package/elf2flt/0002-elf2flt.ld-reinstate-32-byte-alignment-for-.data-sec.patch Upstream
+package/elf2flt/0003-elf2flt-add-riscv-64-bits-support.patch Upstream
+package/elf2flt/0004-elf2flt-create-a-common-helper-function.patch Upstream
+package/elf2flt/0005-elf2flt-fix-fatal-error-regression-on-m68k-xtensa-ri.patch Upstream
+package/elf2flt/0006-elf2flt-xtensa-fix-text-relocations.patch Upstream
 package/elftosb/0001-fixes-includes.patch Upstream
 package/elftosb/0002-force-cxx-compiler.patch Upstream
 package/elfutils/0001-Add-a-enable-disable-progs-configure-option.patch Upstream
@@ -382,8 +422,12 @@ package/empty/0001-respect-LDFLAGS.patch Upstream
 package/erlang-p1-sip/0001-correct-include.patch Upstream
 package/erlang-p1-xmpp/0001-fix-includes.patch Upstream
 package/erlang-rebar/0001-src-rebar_port_compiler-add-fPIC-to-LDFLAGS-by-defau.patch Upstream
+package/erlang/0001-erts-ethread-instruct-libatomic_ops-we-do-require-CA.patch Upstream
+package/erlang/0002-erts-emulator-reorder-inclued-headers-paths.patch Upstream
+package/erlang/0003-crypto-Fixes-for-LibreSSL-3-5-0.patch Upstream
 package/espeak/0001-Fix-build-of-shared-library-on-architectures-needing.patch Upstream
 package/espeak/0002-tr_languages-cast-string_ordinal-init-values.patch Upstream
+package/eudev/0001-Only-use-pragma-for-ignoring-diagnostics-if-.patch Upstream
 package/eudev/S10udev ConsecutiveEmptyLines Indent Shellcheck Variables
 package/evemu/0001-Include-limits.h-for-PATH_MAX.patch Upstream
 package/evemu/0002-evemu-Update-struct-input_event.patch Upstream
@@ -401,6 +445,8 @@ package/exim/0009-Fix-non-WITH_CONTENT_SCAN-build-3.patch Upstream
 package/exim/S86exim Indent Variables
 package/expect/0001-enable-cross-compilation.patch Upstream
 package/expect/0002-allow-tcl-build-directory.patch Upstream
+package/f2fs-tools/0001-configure-ac-fix-cross-compilation.patch Upstream
+package/f2fs-tools/0002-f2fs-tools-fix-build-error-on-lz4-1-9-4.patch Upstream
 package/faifa/0001-sha2.c-explicitly-include-endian.h-for-BYTE_ORDER-ma.patch Upstream
 package/faifa/0002-hpav_cfg.c-do-not-include-linux-if_ether.h-for-musl-.patch Upstream
 package/faifa/0003-Makefile.in-fix-asbolute-symlink-of-libfaifa.so.patch Upstream
@@ -428,17 +474,23 @@ package/ffmpeg/0003-libavutil-Fix-mips-build.patch Upstream
 package/ffmpeg/0004-configure-add-extralibs-to-extralibs_xxx.patch Upstream
 package/ficl/0001-fix-Makefile.patch Upstream
 package/ficl/0002-Makefile.linux-pass-LDFLAGS.patch Upstream
+package/file/0001-src-file.c-fix-build-without-wide-support.patch Upstream
 package/flatbuffers/0001-include-flatbuffers-base.h-fix-build-on-musl.patch Upstream
 package/flex/0001-build-AC_USE_SYSTEM_EXTENSIONS-in-configure.ac.patch Upstream
 package/flex/0002-build-make-it-possible-to-disable-the-build-of-the-f.patch Upstream
 package/flex/0003-build-make-it-possible-to-disable-the-build-of-the-d.patch Upstream
 package/flite/0001-fix-alsa-static.patch Upstream
 package/fltk/0001-disable-tests.patch Upstream
+package/fluent-bit/0001-lib-cfl-fixup-static_assert.patch Upstream
+package/fluent-bit/0002-lib-c-ares-fixup-static_assert.patch Upstream
+package/fluent-bit/0003-fix-build-without-C.patch Upstream
 package/fluxbox/0001-fixes-bug-1138.patch Upstream
+package/freeipmi/0001-add-disable-doc.patch Upstream
 package/freeradius-client/0001-fix-for-nettle.patch Upstream
 package/freerdp/0001-Fix-variable-declaration-in-loop.patch Upstream
 package/freerdp/0002-Fixed-variable-declaration-in-loop.patch Upstream
 package/freerdp/0003-winpr-include-winpr-file.h-fix-build-on-uclibc.patch Upstream
+package/freerdp/0004-Fix-8702-Disable-sha3-and-shake-hashes-for-libressl.patch Upstream
 package/freescale-imx/imx-kobs/0001-Fix-musl-build.patch Upstream
 package/freescale-imx/imx-kobs/0002-Fix-build-for-recent-toolchains.patch Upstream
 package/freescale-imx/imx-uuc/S80imx-uuc Indent Shellcheck Variables
@@ -455,10 +507,15 @@ package/fxload/0001-fix-static-build.patch Upstream
 package/gamin/0001-no-abstract-sockets.patch Upstream
 package/gamin/0002-no-const-return.patch Sob Upstream
 package/gamin/0003-fix-missing-PTHREAD_MUTEX_RECURSIVE_NP.patch Upstream
+package/gawk/0001-Fix-a-bug-with-Node_elem_new.patch Upstream
+package/gcc/10.4.0/0001-Revert-re-PR-target-92095-internal-error-with-O1-mcp.patch Upstream
+package/gcc/10.4.0/0002-or1k-Add-mcmodel-option-to-handle-large-GOTs.patch Upstream
+package/gcc/10.4.0/0003-or1k-Use-cmodel-large-when-building-crtstuff.patch Upstream
+package/gcc/10.4.0/0004-gcc-define-_REENTRANT-for-OpenRISC-when-pthread-is-p.patch Upstream
+package/gcc/10.4.0/0005-disable-split-stack-for-non-thread-builds.patch Upstream
 package/gcc/11.4.0/0001-or1k-Add-mcmodel-option-to-handle-large-GOTs.patch Upstream
 package/gcc/11.4.0/0004-disable-split-stack-for-non-thread-builds.patch Upstream
 package/gcc/12.3.0/0001-disable-split-stack-for-non-thread-builds.patch Upstream
-package/gcc/13.2.0/0001-disable-split-stack-for-non-thread-builds.patch Upstream
 package/gcc/8.4.0/0001-xtensa-fix-PR-target-91880.patch Upstream
 package/gcc/8.4.0/0002-Revert-re-PR-target-92095-internal-error-with-O1-mcp.patch Upstream
 package/gcc/8.4.0/0003-libsanitizer-Remove-cyclades-from-libsanitizer.patch Upstream
@@ -468,6 +525,15 @@ package/gcc/arc-2020.09-release/0002-libsanitizer-Remove-cyclades-from-libsaniti
 package/gcc/arc-2020.09-release/0100-uclibc-conf.patch Upstream
 package/gcr/0001-meson-Fix-unknown-kw-argument-in-gnome.generate_gir.patch Upstream
 package/gdal/0001-fix-uclibc-build-without-NPTL.patch Upstream
+package/gdb/10.2/0001-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch Upstream
+package/gdb/10.2/0002-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch Upstream
+package/gdb/10.2/0003-use-asm-sgidefs.h.patch Upstream
+package/gdb/10.2/0004-gdbserver-fix-build-for-m68k.patch Upstream
+package/gdb/10.2/0005-nat-fork-inferior-include-linux-ptrace.h.patch Upstream
+package/gdb/10.2/0006-Fix-getrandom-compile-for-uclibc-v1.0.35.patch Upstream
+package/gdb/10.2/0007-fix-musl-build-on-riscv.patch Upstream
+package/gdb/10.2/0008-gdbserver-Makefile.in-fix-NLS-build.patch Upstream
+package/gdb/10.2/0009-gdb-Fix-native-build-on-xtensa.patch Upstream
 package/gdb/11.2/0001-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch Upstream
 package/gdb/11.2/0002-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch Upstream
 package/gdb/11.2/0003-use-asm-sgidefs.h.patch Upstream
@@ -486,20 +552,14 @@ package/gdb/12.1/0006-Fix-getrandom-compile-for-uclibc-v1.0.35.patch Upstream
 package/gdb/12.1/0007-fix-musl-build-on-riscv.patch Upstream
 package/gdb/12.1/0008-gdbserver-Makefile.in-fix-NLS-build.patch Upstream
 package/gdb/12.1/0009-gdb-Fix-native-build-on-xtensa.patch Upstream
-package/gdb/13.2/0001-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch Upstream
-package/gdb/13.2/0002-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch Upstream
-package/gdb/13.2/0003-use-asm-sgidefs.h.patch Upstream
-package/gdb/13.2/0004-gdbserver-fix-build-for-m68k.patch Upstream
-package/gdb/13.2/0005-nat-fork-inferior-include-linux-ptrace.h.patch Upstream
-package/gdb/13.2/0006-Fix-getrandom-compile-for-uclibc-v1.0.35.patch Upstream
-package/gdb/13.2/0007-fix-musl-build-on-riscv.patch Upstream
-package/gdb/13.2/0008-gdbserver-Makefile.in-fix-NLS-build.patch Upstream
-package/gdb/13.2/0009-gdb-Fix-native-build-on-xtensa.patch Upstream
 package/gengetopt/0001-configure.ac-add-disable-doc-option.patch Upstream
 package/genpart/0001-fix-return-code.patch Upstream
 package/genromfs/0001-build-system.patch Sob Upstream
 package/gensio/0001-Fix-missing-EVP_PKEY_ED25519-build-error-on-libressl.patch Upstream
+package/gerbera/0001-Fix-build-with-fmt-9-0.patch Upstream
 package/gerbera/S99gerbera Indent
+package/gettext-gnu/0001-error_print_progname.patch Upstream
+package/gettext-gnu/0002-restore-the-ability-to-buld-gettext-tools-seperately-part1.patch Upstream
 package/giblib/0001-fix-imlib2-detection.patch Upstream
 package/giflib/0001-Makefile-add-targets-to-manage-static-building.patch Upstream
 package/git-crypt/0001-fix-build-with-libressl-3.5.0.patch Upstream
@@ -507,9 +567,12 @@ package/gli/0001-Optional-building-tests.patch Upstream
 package/glog/0001-added-emscripten-support.patch Upstream
 package/glorytun/0001-Add-support-for-Apple-silicon.patch Upstream
 package/glorytun/0002-aegis256.c-fix-aarch64-build-with-uclibc.patch Upstream
+package/gmp/0001-mpz-inp_raw.c-Avoid-bit-size-overflows.patch Upstream
 package/gnu-efi/0001-Make.defaults-don-t-override-ARCH-when-cross-compili.patch Upstream
 package/gnupg/0001-build-Always-use-EXTERN_UNLESS_MAIN_MODULE-pattern.patch Upstream
 package/gnuplot/0001-configure-add-without-demo-option.patch Upstream
+package/gnuradio/0001-blocks-Including-missing-vector-in-blockinterleaver.patch Upstream
+package/gnuradio/0002-blocks-blockinterleaving.h-add-missing-cstddef-heade.patch Upstream
 package/go/0001-build.go-explicit-option-for-crosscompilation.patch Upstream
 package/gob2/0001-dont-include-from-prefix.patch Upstream
 package/gobject-introspection/0001-disable-tests.patch Upstream
@@ -543,6 +606,7 @@ package/haveged/S21haveged Shellcheck Variables
 package/heirloom-mailx/0001-fix-libressl-support.patch Upstream
 package/highway/0001-Fix-compilation-for-armv7-with-gcc-8.patch Upstream
 package/highway/0002-Fix-compilation-for-armv7-targets-with-vfp-v4-and-gc.patch Upstream
+package/hiredis/0001-CMakeLists.txt-respect-BUILD_SHARED_LIBS.patch Upstream
 package/hplip/0001-build-use-pkg-config-to-discover-libusb.patch Upstream
 package/hplip/0002-configure.in-fix-AM_INIT_AUTOMAKE-call.patch Upstream
 package/htpdate/S43htpdate Shellcheck
@@ -572,7 +636,10 @@ package/ifupdown-scripts/nfs_check Shellcheck
 package/ifupdown/0001-archcommon-define-GNU-only-FNM_EXTMATCH-to-zero-on-n.patch Upstream
 package/ifupdown/0001-dont-use-dpkg-architecture.patch Upstream
 package/igd2-for-linux/S99upnpd Indent Shellcheck Variables
-package/imx-mkimage/0001-Add-unused-fake-version.patch Upstream
+package/imx-mkimage/0001-Add-support-for-overriding-BL32-and-BL33-not-only-BL.patch Upstream
+package/imx-mkimage/0002-Add-LDFLAGS-to-link-step.patch Upstream
+package/imx-mkimage/0003-Add-unused-fake-version.patch Upstream
+package/imx-mkimage/0004-Add-support-for-overriding-BL31-BL32-and-BL33.patch Upstream
 package/inadyn/S70inadyn Indent NotExecutable
 package/initscripts/init.d/rcK ConsecutiveEmptyLines EmptyLastLine Shellcheck
 package/initscripts/init.d/rcS ConsecutiveEmptyLines EmptyLastLine Shellcheck
@@ -580,6 +647,7 @@ package/input-event-daemon/S99input-event-daemon ConsecutiveEmptyLines Indent Va
 package/intel-gmmlib/0001-Drop-hardening-related-flags.patch Upstream
 package/intel-mediasdk/0001-Don-t-force-fstack-protector.patch Upstream
 package/intltool/0001-perl-5.26-compatibility.patch Upstream
+package/iodine/0001-disable-systemd-and-selinux.patch Upstream
 package/iotop/0001-Fix-build-error-with-Python-3.patch Upstream
 package/iozone/0001-Add-new-targets-for-iozone.patch Upstream
 package/iperf/0001-fix-single-threaded-compile-breakage.patch Upstream
@@ -599,10 +667,14 @@ package/irrlicht/0002-makefile-override-LDFLAGS-and-remove-obsolete-X11R6-.patch
 package/iucode-tool/S00iucode-tool Variables
 package/iwd/S40iwd Shellcheck Variables
 package/jack2/0001-Remove-usage-of-U-mode-bit-for-opening-files-in-pyth.patch Upstream
+package/janet/0001-Update-for-more-minimal-builds.patch Upstream
 package/janus-gateway/0001-disable-ssp.patch Upstream
 package/janus-gateway/0002-Add-test-for-Wunused-but-set-variable.patch Upstream
 package/jose/0001-lib-hsh.c-rename-hsh-local-variable.patch Upstream
 package/jose/0002-man-add-option-to-skip-building-man-pages.patch Upstream
+package/keepalived/0001-vrrp-nft-didn-t-support-meta-l4proro-until-Linux-3-14.patch Upstream
+package/keepalived/0002-ipvs-nft-didn-t-support-meta-l4proro-until-Linux-3-14.patch Upstream
+package/keepalived/0003-fix-build-with-libressl.patch Upstream
 package/kexec-lite/0001-clean-restart.patch Upstream
 package/keyutils/0001-fix-install-rule.patch Upstream
 package/keyutils/0002-cifs.patch Sob Upstream
@@ -616,6 +688,7 @@ package/lcdproc/0001-LCDd.conf.patch Upstream
 package/lcdproc/0002-Add-missing-ioctl-header.patch Upstream
 package/lcdproc/0003-Fixcompilation-with-GCC-10-x.patch Upstream
 package/leafnode2/0001-cross_makefile.patch Upstream
+package/less/0001-End-OSC8-hyperlink-on-invalid-embedded-escape-sequence.patch Upstream
 package/let-me-create/0001-fix-build-with-musl-C-library.patch Upstream
 package/leveldb/0001-Fix-compilation-with-g-4.8.2.patch Upstream
 package/leveldb/0002-CMake-install-libmemenv.a.patch Upstream
@@ -623,25 +696,34 @@ package/leveldb/0003-CMakeLists.txt-check-for-atomic-library.patch Upstream
 package/lftp/0001-Fix-build-with-LibreSSL-following-commit-537f37898.patch Upstream
 package/lftp/0002-src-lftp_ssl.c-fix-build-with-libressl-2.7.0.patch Upstream
 package/libabseil-cpp/0001-force-position-independent-code.patch Upstream
+package/libarchive/0001-autotools-do-not-add-iconv-for-Requires.private.patch Upstream
 package/libargon2/0001-libargon2-dont-fail-on-existing-symlink.patch Upstream
 package/libart/0001-art-config-cross.patch Sob Upstream
+package/libasplib/0001-asplib_CPUTimer.h-Fix-time.h-include.patch Upstream
 package/libatasmart/0001-strpool-cross-flags.patch Upstream
 package/libavl/0001-fix-makefile.patch Upstream
 package/libb64/0001-Integer-overflows.patch Upstream
 package/libb64/0002-Initialize-C++-objects.patch Upstream
 package/libblockdev/0001-Provide-replacement-function-for-strerror_l.patch Upstream
+package/libbsd/0001-src-local-elf.h-fix-big-endian-sh.patch Upstream
 package/libcdaudio/0001-libcdaudio-enable-autoreconf.patch Upstream
 package/libcec/0001-cecloader-h-fix-null-return.patch Upstream
 package/libcgi/0001-CMakeLists.txt-honour-BUILD_TESTING.patch Upstream
 package/libcgicc/0001-disable-documentation-option.patch Sob Upstream
+package/libclc/0001-support-out-of-tree-build.patch Upstream
+package/libcodec2/0001-update-cmake.patch Upstream
 package/libconfuse/0001-Fix-163-unterminated-username-used-with-getpwnam.patch Upstream
 package/libcorrect/0002-CMakeLists.txt-conditionally-use-fsanitize-address.patch Upstream
 package/libcuefile/0001-fix-static-link.patch Upstream
 package/libdaemon/0001-testd-use-unistd-h-instead-of-sys-unistd-h.patch Upstream
+package/libdeflate/0001-lib-arm-crc32-use-crypto-target-when-required-due-to-gcc-bug.patch Upstream
+package/libdeflate/0002-lib-arm-cpu_features-fix-build-error-due-to-PMULL-enabled-without-NEON.patch Upstream
 package/libdnet/0001-python-makefile.patch Upstream
+package/libdnet/0002-Correct-path-to-string-h-from-bsd.patch Upstream
 package/libdrm/0001-tests-meson.build-disable-nouveau-tests-for-static-b.patch Upstream
 package/libdvbcsa/0001-altivec-powerpc64.patch Upstream
 package/libeXosip2/0001-src-eXtl_dtls.c-fix-build-with-libressl-3.4.1.patch Upstream
+package/libebml/0001-include-appropriate-header-files-for-std-numeric_limits.patch Upstream
 package/libedit/0001-check-bsd-functions-in-libbsd.patch Upstream
 package/libevent/0001-Don-t-define-BIO_get_init-for-LibreSSL-3-5.patch Upstream
 package/libfcgi/0001-link-against-math.patch Upstream
@@ -661,9 +743,12 @@ package/libftdi1/0002-CMakeLists.txt-fix-paths-when-FTDIPP-is-set.patch Upstream
 package/libftdi1/0003-CMakeLists.txt-fix-static-build-with-libusb-and-lato.patch Upstream
 package/libfuse/0001-fix-aarch64-build.patch Upstream
 package/libfuse/0002-util-ulockmgr_server-c-conditionally-define-closefrom-fix-glibc-2-34.patch Upstream
+package/libfuse3/0001-Fix-MS_LAZYTIME-not-defined-on-uclibc.patch Upstream
 package/libgcrypt/0001-configure.ac-add-an-option-to-disable-tests.patch Upstream
+package/libgdiplus/0001-Build-unit-tests-only-when-enable-unit-tests-is-pass.patch Upstream
 package/libglfw/0001-Wayland-Remove-extra-cmake-modules-dependency.patch Upstream
 package/libglfw/0002-src-CMakeLists.txt-allow-override-of-wayland-pkgdata.patch Upstream
+package/libgpgme/0001-Fix-build-without-threads.patch Upstream
 package/libgpiod/0001-build-add-a-configure-switch-for-building-examples.patch Upstream
 package/libgsm/0001-misc-fixes-from-archlinux.patch Upstream
 package/libgtk2/0001-reduce-dependencies.patch Upstream
@@ -674,6 +759,7 @@ package/libhid/0002-no-newline-in-ldflags.patch Upstream
 package/libhid/0003-uclinux.patch Upstream
 package/libical/0001-no-tests.patch Upstream
 package/libical/0002-icaltypes-c-icalreqstattype_from_string-copy-the-reqstattype.patch Upstream
+package/libiio/0001-iiod-serial.c-fix-sparc-build.patch Upstream
 package/libiio/S99iiod Shellcheck Variables
 package/libiqrf/0001-cmake-handle-static-library-and-find-required-thread.patch Upstream
 package/libiqrf/0002-use-only-c-language.patch Upstream
@@ -695,6 +781,11 @@ package/libloki/0002-use-ln-snf.patch Upstream
 package/libmad/0001-mips-h-constraint-removal.patch Sob Upstream
 package/libmad/0002-configure-ac-automake-foreign.patch Upstream
 package/libmanette/0001-Meson-Un-hardcode-building-a-shared-library.patch Upstream
+package/libmemcached/0001-disable-tests.patch Upstream
+package/libmemcached/0002-disable-sanitizer.patch Upstream
+package/libmemcached/0003-move-ac_config_aux_dir.patch Upstream
+package/libmemcached/0004-disable-doc-and-man.patch Upstream
+package/libmemcached/0005-fix-pointer-comparaison.patch Upstream
 package/libmng/0001-jpeg-9a.patch Upstream
 package/libmodsecurity/0001-configure.ac-drop-usage-of-git-at-configure-time.patch Upstream
 package/libmodsecurity/0002-modsecurity.pc.in-add-lstdc.patch Upstream
@@ -703,8 +794,10 @@ package/libmpeg2/0001-altivec.patch Upstream
 package/libmpeg2/0002-armv4l.patch Upstream
 package/libmpeg2/0003-fix-arm-detection.patch Upstream
 package/libmpeg2/0004-fix-sparc.patch Upstream
+package/libnet/0001-Use-standard-int64_t-instead-of-__int64_t-for-mingw-cross-build.patch Upstream
 package/libnetfilter_conntrack/0001-conntrack-fix-build-with-kernel-5-15-and-musl.patch Upstream
 package/libnfc/0001-autotools-make-example-build-optional.patch Upstream
+package/libnfs/0001-Fix-include-sys-time.h.patch Upstream
 package/libnids/0001-libpcap-use-pkg-config.patch Upstream
 package/libnl/0001-Add-musl-workaround-to-the-libc-compat.h-copy.patch Upstream
 package/libnss/0001-Bug-1801182-Allow-overriding-OS_ARCH-OS_TEST-and-OS_.patch Upstream
@@ -714,18 +807,26 @@ package/libodb-mysql/0002-mariadb-FTBFS-fix.patch Upstream
 package/libopenssl/0001-Dont-waste-time-building-manpages-if-we-re-not-going.patch Upstream
 package/libopenssl/0002-Reproducible-build-do-not-leak-compiler-path.patch Upstream
 package/libopenssl/0004-Configure-use-ELFv2-ABI-on-some-ppc64-big-endian-sys.patch Upstream
+package/libopenssl/0005-crypto-perlasm-ppc-xlate.pl-add-linux64v2-flavour.patch Upstream
+package/libopenssl/0006-Add-support-for-io_pgetevents_time64-syscall.patch Upstream
+package/libopenssl/0007-Fixup-support-for-io_pgetevents_time64-syscall.patch Upstream
 package/liboping/0001-fix-utf8-support.patch Upstream
 package/liboping/0002-Open-raw-sockets-when-adding-hosts-not-when-doing-th.patch Upstream
 package/liboping/0003-Fix-compile-break-with-GCC-7-buffer-overflow-with-snprintf.patch Upstream
 package/liboping/0004-Fix-compile-error-on-GCC-7.patch Upstream
 package/liboping/0005-src-oping.c-always-use-s-style-format-for-printf-sty.patch Upstream
 package/libp11/0001-src-p11_attr.c-fix-build-with-gcc-4.8.patch Upstream
+package/libpam-tacplus/0001-Add-an-option-to-disable-Werror.patch Upstream
+package/libpjsip/0001-Merge-pull-request-from-GHSA-9pfh-r8x4-w26w.patch Upstream
+package/libpjsip/0002-Merge-pull-request-from-GHSA-cxwq-5g9x-x7fr.patch Upstream
 package/libplatform/0001-cmake-require-c-11-as-the-minimum-standard.patch Upstream
 package/libpng/0001-Disable-pngfix-and-png-fix-itxt.patch Upstream
 package/libpthsem/0001-fix-build-on-linux-3.x-host.patch Upstream
+package/libqb/0001-Add-disable-tests-option.patch Upstream
 package/libressl/0001-always-expose-SSL_OP_NO_TLSv1_3.patch Upstream
 package/libroxml/0001-src-roxml_mem.h-add-missing-extern.patch Upstream
 package/librsvg/0001-gdk-pixbuf-loader-Makefile.am-set-GDK_PIXBUF_MODULED.patch Upstream
+package/librtas/0001-configure.ac-remove-LOCAL_CHECK_FLAGS.patch Upstream
 package/librtlsdr/0001-Makefile.am-respect-DESTDIR-with-install-udev-rules.patch Upstream
 package/libselinux/0001-fix-musl-build.patch Upstream
 package/libselinux/0002-Do-not-use-PYCEXT-and-rely-on-the-installed-file-nam.patch Upstream
@@ -742,11 +843,14 @@ package/libsigrok/0001-Support-glibmm-2.68.patch Upstream
 package/libsigrokdecode/0001-configure-ac-Add-support-for-Python-3-9.patch Upstream
 package/libsigrokdecode/0002-configure-Add-python-3-10-support.patch Upstream
 package/libsigrokdecode/0003-configure-ac-Use-python3-embed-pc-as-a-fallback.patch Upstream
+package/libsolv/0001-Fix-build-without-C.patch Upstream
 package/libsoup/0001-meson.build-set-c_std-to-gnu99.patch Upstream
 package/libsoxr/0001-Add-Libs.private-for-static-linking.patch Upstream
 package/libspatialindex/0001-allow-building-static-libs.patch Upstream
 package/libspatialindex/0002-CMakeLists.txt-fix-CMAKE_BUILD_TYPE.patch Upstream
 package/libsquish/0001-Makefile-add-f-option-for-ln-to-remove-existing-dest.patch Upstream
+package/libsrtp/0001-Remove-compatibility-code-for-legacy-OpenSSL-to-fix-LibreSSL-build.patch Upstream
+package/libssh2/0001-Opaque-structs-in-LibreSSL-3-5.patch Upstream
 package/libsvg/0001-fix-expat-static-declaration.patch Upstream
 package/libsvg/0002-Fix-undefined-symbol-png_set_gray_1_2_4_to_8.patch Upstream
 package/libsvgtiny/0001-disable-debug-printfs.patch Upstream
@@ -754,6 +858,9 @@ package/libsvgtiny/0002-Remove-Werror.patch Upstream
 package/libsvgtiny/0003-Hopefully-silence-warnings-about-inlines-and-non-inlines-calling-one.patch Upstream
 package/libsvgtiny/0004-Build-Include-gperf-generated-code-directly.patch Upstream
 package/libtalloc/0001-buildtools-wafsamba-add-disable-stack-protector-opti.patch Upstream
+package/libteam/0001-revert-disregard-current-state.patch Upstream
+package/libteam/0002-fix-build-on-openwrt-musl-libc.patch Upstream
+package/libteam/0003-increase-wait-time-for-daemon-kill.patch Upstream
 package/libtelnet/0001-fix-compilation-without-zlib.patch Upstream
 package/libtheora/0001-link-libtheoradec.patch Upstream
 package/libtheora/0002-fix-autoreconf.patch Upstream
@@ -764,6 +871,9 @@ package/libubootenv/0001-src-CMakeLists.txt-do-not-force-the-build-of-a-share.pa
 package/libuhttpd/0001-add-compatibility-for-wolfssl-5-0.patch Upstream
 package/libuio/0001-configure.ac-set-automake-strictness-to-foreign.patch Upstream
 package/liburcu/0001-Only-blacklist-ARM-gcc-4.8.0-and-4.8.1.patch Upstream
+package/liburcu/0002-fix-don-t-use-C-thread_local-on-MacOs.patch Upstream
+package/liburcu/0003-Always-use-__thread-for-Thread-local-storage-except-on-MSVC.patch Upstream
+package/libusb-compat/0001-fix-a-build-issue-on-linux.patch Upstream
 package/libusbgx/0001-Add-include-of-sys-sysmacro.h.patch Upstream
 package/libuwsc/0001-CMakeLists.txt-add-BUILD_EXAMPLE.patch Upstream
 package/libuwsc/0002-fix-bad-indentation.patch Upstream
@@ -773,6 +883,7 @@ package/libwebsock/0002-fix-ssl.patch Upstream
 package/libwebsock/0003-fix-incorrect-inline.patch Upstream
 package/libwebsockets/0001-lib-tls-CMakeLists.txt-fix-build-without-threads.patch Upstream
 package/libyuv/0001-i386-sse2.patch Upstream
+package/lightning/0001-lib-jit_disasm.c-fix-build.patch Upstream
 package/lighttpd/0001-Modify-the-default-lighttpd-configuration-file-to-ha.patch Upstream
 package/lighttpd/S50lighttpd EmptyLastLine Indent Shellcheck Variables
 package/linknx/0001-configure-ac-tweak-CPPUNIT-conditional.patch Upstream
@@ -782,8 +893,11 @@ package/linux-fusion/0001-fix-for-linux-4-and-above.patch Upstream
 package/linux-fusion/0002-Fix-mismatched-conversion-spec-and-value-in-printk.patch Upstream
 package/linux-fusion/0003-Fix-fusion-Unknown-symbol-tasklist_lock-err-0.patch Upstream
 package/linux-fusion/0004-Port-one-one_udp.c-to-Linux-4.1.patch Upstream
+package/linux-tools/S10hyperv Variables
 package/linux-zigbee/0001-test-serial-Remove-test-serial.patch Upstream
 package/linux-zigbee/0002-addrdb-coord-config-parse.y-add-missing-time.h-inclu.patch Upstream
+package/linuxptp/0001-missing.h-drop-clock_nanosleep-replacement.patch Upstream
+package/linuxptp/0002-makefile-use-conditional-assignment-for-KBUILD_OUTPUT.patch Upstream
 package/linuxptp/S65ptp4l Indent Shellcheck
 package/linuxptp/S66phc2sys Indent Shellcheck
 package/lirc-tools/0001-plugins-devinput.c-fix-build-with-musl-1.2.0.patch Upstream
@@ -794,8 +908,7 @@ package/lite/0002-no-tests.patch Sob Upstream
 package/lite/0003-pkg-config.patch Sob Upstream
 package/live555/0001-Add-a-pkg-config-file-for-the-shared-libraries.patch Upstream
 package/lldpd/S60lldpd Indent Shellcheck Variables
-package/llvm-project/clang/0001-lib-Driver-ToolChains-Gnu-Use-GCC_INSTALL_PREFIX-in-.patch Upstream
-package/llvm-project/libclc/0001-support-out-of-tree-build.patch Upstream
+package/llvm/0001-nfc-Fix-missing-include.patch Upstream
 package/lm-sensors/0001-static-build.patch Upstream
 package/lm-sensors/0002-no-host-ldconfig.patch Upstream
 package/lmbench/0001-scripts-build-use-bin-bash-as-shell.patch Upstream
@@ -809,6 +922,7 @@ package/lshw/0001-solve-Compile-error-when-g-version-is-less-than-5.patch Upstre
 package/ltrace/0001-arm-plt.patch Upstream
 package/ltrace/0002-sparc-add-missing-library.h-include.patch Upstream
 package/ltrace/0003-configure.ac-fix-autoreconf-with-autoconf-2.70.patch Upstream
+package/ltris/0001-fix-build-with-gcc-4.8.patch Upstream
 package/lttng-babeltrace/0001-tests-lib-Makefile.am-remove-unneeded-static-flag.patch Upstream
 package/lttng-babeltrace/0002-configure.ac-fix-popt-static-build.patch Upstream
 package/lttng-libust/0001-configure.ac-add-disable-tests.patch Upstream
@@ -845,8 +959,11 @@ package/madplay/0001-switch-to-new-alsa-api.patch Sob Upstream
 package/madplay/0002-configure-ac-automake-foreign.patch Upstream
 package/madplay/0003-configure-ac-use-pkg-config-to-find-id3tag.patch Upstream
 package/madplay/0004-configure-ac-call-AM_MKINSTALLDIRS.patch Upstream
+package/make/0001-configure.ac-Support-GLIBC-glob-interface-version-2.patch Upstream
+package/make/0001-glob-Do-not-assume-glibc-glob-internals.patch Upstream
 package/makedumpfile/0002-Handle-__mips64.patch Upstream
 package/mariadb/0001-add-extra-check-for-librt.patch Upstream
+package/mariadb/0002-include-ssl_compat.h-fix-build-with-libressl-3.5.0.patch Upstream
 package/mariadb/S97mysqld Indent Shellcheck Variables
 package/matchbox-keyboard/mb-applet-kbd-wrapper.sh Shellcheck TrailingSpace
 package/matchbox-lib/0001-index-is-legacy.patch Upstream
@@ -856,8 +973,12 @@ package/matchbox-panel/0003-mb-applet-battery.patch Upstream
 package/matchbox-startup-monitor/0001-true-false.patch Upstream
 package/matchbox/0001-defaulttheme.patch Upstream
 package/matchbox/0002-src-Fix-build-with-gcc-10.patch Upstream
+package/mbw/0001-CMakeLists.txt-fix-build-without-C.patch Upstream
 package/mediastreamer/0001-src-videofilters-nowebcam.c-fix-build-without-ffmpeg.patch Upstream
 package/mediastreamer/0002-Use-AV_INPUT_BUFFER_PADDING_SIZE-to-determine-paddin.patch Upstream
+package/memcached/0001-logger.c-initialize-rport.patch Upstream
+package/memcached/0002-check-for-sys-auxv.h.patch Upstream
+package/memcached/0003-configure.ac-add-disable-werror.patch Upstream
 package/memstat/0001-PATH_MAX.patch Upstream
 package/mender-connect/S43mender-connect Shellcheck
 package/menu-cache/0001-Support-gcc10-compilation.patch Upstream
@@ -906,6 +1027,7 @@ package/musepack/0004-missing-sys-select.patch Upstream
 package/musepack/0005-fix-build-with-gcc-10.patch Upstream
 package/musl/0001-avoid-kernel-if_ether.h.patch Upstream
 package/musl/0002-package-musl-Make-scheduler-functions-Linux-compatib.patch Upstream
+package/musl/0003-fix-incorrect-parameter-name-in-internal-netlink.h-R.patch Upstream
 package/nano/0001-lib-getrandom.c-fix-build-with-uclibc-1.0.35.patch Upstream
 package/nanocom/0001-fix-build-with-gcc-10.patch Upstream
 package/ncftp/0001-fix-gcc-10.patch Upstream
@@ -914,6 +1036,10 @@ package/ne10/0001-CMakeLists-don-t-hard-code-thumb-code-generation.patch Upstrea
 package/ne10/0002-fix-build-without-C.patch Upstream
 package/neard/S53neard Indent Shellcheck Variables
 package/neardal/0001-lib-neardal.h-fix-build-with-gcc-10.patch Upstream
+package/neon/0001-Revert-Advertise-TS_SSL-feature-with-OpenSSL-1.1.0.patch Upstream
+package/neon/0002-configure.ac-fix-autoreconf.patch Upstream
+package/netatalk/0001-Fix-setting-of-LD_LIBRARY_FLAGS-shlibpath_var.patch Upstream
+package/netatalk/0002-etc-uams-openssl_compat.h-fix-build-with-libressl-2..patch Upstream
 package/netatalk/S50netatalk EmptyLastLine Indent Variables
 package/netcat/0001-signed-bit-counting.patch Sob Upstream
 package/netopeer2/S52netopeer2 Shellcheck Variables
@@ -930,6 +1056,8 @@ package/netsurf/0002-do-not-cross-compile-nsgenbind.patch Upstream
 package/netsurf/0003-fix-compilation-without-curl.patch Upstream
 package/netsurf/0004-framebuffer-Fix-internal-font-generated-source-for-GCC-10.patch Upstream
 package/nettle/0001-disable-testsuite-examples.patch Upstream
+package/network-manager/0001-build-meson-add-option-to-set-the-mobile-broadband-p.patch Upstream
+package/network-manager/0002-meson.build-fix-build-failure-with-Dmodem_manager-fa.patch Upstream
 package/network-manager/S45network-manager ConsecutiveEmptyLines EmptyLastLine Shellcheck Variables
 package/nfs-utils/S60nfs ConsecutiveEmptyLines Shellcheck Variables
 package/nginx-modsecurity/0001-config-use-pkg-config.patch Upstream
@@ -949,10 +1077,10 @@ package/ngrep/0002-Check-for-libnet_init-in-configure-in.patch Upstream
 package/ngrep/0003-fix-disable-tcpkill.patch Upstream
 package/nilfs-utils/0001-nilfs_cleanerd-link-dynamically.patch Upstream
 package/nmap/0001-libdnet-wrapper-configure.patch Upstream
-package/nodejs/nodejs-src/0001-add-qemu-wrapper-support.patch Upstream
-package/nodejs/nodejs-src/0002-check-if-uclibc-has-backtrace-support.patch Upstream
-package/nodejs/nodejs-src/0003-include-obj-name-in-shared-intermediate.patch Upstream
-package/nodejs/nodejs-src/0004-lib-internal-modules-cjs-loader.js-adjust-default-pa.patch Upstream
+package/nodejs/0001-add-qemu-wrapper-support.patch Upstream
+package/nodejs/0002-check-if-uclibc-has-backtrace-support.patch Upstream
+package/nodejs/0003-include-obj-name-in-shared-intermediate.patch Upstream
+package/nodejs/0004-lib-internal-modules-cjs-loader.js-adjust-default-pa.patch Upstream
 package/nodm/S90nodm Indent Shellcheck Variables
 package/norm/0001-protolib-drop-linux-version-check.patch Upstream
 package/norm/0002-Use-print-as-function-call-for-Python3-compatibility.patch Upstream
@@ -960,10 +1088,13 @@ package/norm/0003-Fix-mixed-tabs-spaces-in-protolib-wscript.patch Upstream
 package/nss-pam-ldapd/S45nslcd EmptyLastLine Indent Shellcheck Variables
 package/ntp/0001-nano.patch Upstream
 package/ntp/0002-ntp-syscalls-fallback.patch Upstream
+package/ntp/0003-override-shell.patch Upstream
+package/ntp/0004-libntp-Do-not-use-PTHREAD_STACK_MIN-on-glibc.patch Upstream
 package/ntp/S49ntp.in Variables
 package/ntpsec/0001-wscript-remove-checks-for-bsd-string.h-fixes-host-co.patch Upstream
 package/ntpsec/0002-wscript-fix-build-without-stack-protector.patch Upstream
 package/numactl/0001-link-with-latomic-if-needed-again.patch Upstream
+package/nut/0001-clients-upsclient-h-ensure-time_t-is-defined.patch Upstream
 package/nuttcp/0001-susv3-legacy.patch Upstream
 package/nvidia-driver/0001-use-LDFLAGS.patch Upstream
 package/octave/0001-Fix-BLAS-library-integer-size-detection.patch Upstream
@@ -987,15 +1118,17 @@ package/olsr/0001-olsrd-migrate-to-using-bison-3.7.1.patch Upstream
 package/olsr/0002-lib-pud-Makefile-fix-parallel-build.patch Upstream
 package/olsr/0003-pud-adapt-to-API-changes-in-gpsd-3-20.patch Upstream
 package/olsr/0005-lib-pud-src-gpsdclient.c-drop-handling-of-gpsdata-fi.patch Upstream
-package/olsr/0006-build-patch-for-gpsd-3-25.patch Upstream
 package/olsr/S50olsr Indent Shellcheck Variables
 package/omxplayer/0001-Update-Makefile-to-be-compatible-with-buildroot.patch Upstream
+package/open-iscsi/0001-SHA3-is-not-supported-by-libressl.patch Upstream
 package/open-plc-utils/0001-Remove-OWNER-and-GROUPS-parameters-to-install.patch Upstream
+package/open-plc-utils/0002-plc-plc.h-fix-build-with-gcc-10.patch Upstream
 package/open2300/0001-fix-makefile.patch Upstream
-package/openjdk/17.0.9+9/0001-Add-ARCv2-ISA-processors-support-to-Zero.patch Upstream
-package/openjdk/21.0.1+12/0001-Add-ARCv2-ISA-processors-support-to-Zero.patch Upstream
-package/openldap/0001-fix-bignum.patch Upstream
-package/openldap/0002-disable-docs.patch Upstream
+package/openjdk/17.0.7+7/0001-Add-ARCv2-ISA-processors-support-to-Zero.patch Upstream
+package/openldap/0001-fix_cross_strip.patch Upstream
+package/openldap/0002-fix-bignum.patch Upstream
+package/openldap/0003-disable-docs.patch Upstream
+package/openldap/0004-revert-ITS-3977-fix-libtool-static-behavior-to-match.patch Upstream
 package/openntpd/S49ntp Shellcheck Variables
 package/openocd/0001-configure-enable-build-on-uclinux.patch Upstream
 package/openpgm/0001-Rename-openpgm-5.2.pc.in.patch Upstream
@@ -1010,6 +1143,8 @@ package/openrc/0003-init.d-agetty-replace-sbin-agetty-by-sbin-getty.patch Upstre
 package/openrc/0004-init.d-agetty-start-agetty-after-all-sevices.patch Upstream
 package/openrc/0005-runlevels-do-not-add-agetty.tty-1-6-if-MKSYSVINIT-ye.patch Upstream
 package/openrc/0006-Also-create-run-lock-subsys-directory.patch Upstream
+package/opensc/0002-added-compatibility-with-LibreSSL.patch Upstream
+package/opensc/0003-Fix-build-with-libressl-3.5.0.patch Upstream
 package/openssh/S50sshd EmptyLastLine Indent Variables
 package/openswan/0001-lib-libopenswan-constants.c-workaround-missing-ns_t_.patch Upstream
 package/opentyrian/0001-Move-definitions-that-don-t-need-to-be-exposed-from-opl-h-to-opl-c.patch Upstream
@@ -1059,7 +1194,10 @@ package/pdmenu/0002-Makefile-autoconf-makeinfo.in-support-build-install-.patch U
 package/perl-net-ssleay/0001-fix-build-system.patch Upstream
 package/perl-sys-cpu/0001-remove-extraneous-include.patch Upstream
 package/perl-xml-libxml/0001-Makefile-PL.patch Upstream
+package/php-amqp/0001-add-build-support-for-php-8.patch Upstream
+package/php-amqp/0002-more-work-for-php-8.patch Upstream
 package/php-geoip/0001-add-build-support-for-php8.patch Upstream
+package/php-gnupg/0001-Remove-inlining-_phpc_res_close.patch Upstream
 package/php-lua/0001-ZEND_ACC_ALLOW_STATIC-ZEND_ACC_STATIC-for-static-met.patch Upstream
 package/php-lua/0002-php8-explicitly-declare-arginfo.patch Upstream
 package/php-zmq/0001-updates-for-php7.4-and-php8.0.patch Upstream
@@ -1082,11 +1220,17 @@ package/pkcs11-helper/0001-openssl-libressl-3-5-0-does-not-have-DSA_meth_set1_na
 package/pkgconf/0001-Only-prefix-with-the-sysroot-a-subset-of-variables.patch Upstream
 package/pkgconf/0002-Revert-main-assume-modversion-insted-of-version-if-o.patch Upstream
 package/pkgconf/pkg-config.in Shellcheck
+package/poco/0001-Fix-optional-JSON-support-for-MySQL-3753.patch Sob Upstream
 package/poke/0001-configure.ac-HELP2MAN-replace-by-true-when-cross-com.patch Upstream
 package/poke/0002-lib-getrandom.c-fix-build-with-uclibc-1.0.35.patch Upstream
 package/policycoreutils/0001-Add-DESTDIR-to-all-paths-that-use-an-absolute-path.patch Upstream
 package/policycoreutils/0002-Add-PREFIX-to-host-paths.patch Upstream
 package/postgresql/S50postgresql Variables
+package/pound/0001-fix-openssl-1.0.2.patch Upstream
+package/pound/0002-fix-openssl-1.1.0.patch Upstream
+package/powertop/0001-dont-force-stack-smashing-protection.patch Upstream
+package/pppd/0001-pppd-Fix-compilation-with-older-glibc-or-kernel-headers.patch Upstream
+package/pppd/0002-pppd-eap-tls.c-fix-build-with-libressl.patch Upstream
 package/pptp-linux/0001-susv3-legacy.patch Upstream
 package/pptp-linux/0002-fix-parallel-build.patch Upstream
 package/prboom/0001-libpng-1.4.patch Upstream
@@ -1115,12 +1259,16 @@ package/pulseaudio/S50pulseaudio ConsecutiveEmptyLines EmptyLastLine Indent Vari
 package/pulseview/0001-Replace-obsolete-deprecated-Qt-methods.patch Upstream
 package/pulseview/0002-Fix-broken-build-due-to-C-template-behind-C-linkage.patch Upstream
 package/pulseview/0003-Support-glibmm-2.68.patch Upstream
+package/putty/0001-unix-uxutils.h-fix-build-on-uclibc.patch Upstream
 package/python-aiohttp-remotes/0001-Fix-flit_core-build-requires-backend.patch Upstream
 package/python-automat/0001-Remove-uneeded-dependency-to-wheel.patch Upstream
 package/python-crossbar/0001-Avoid-intentional-syntax-error.patch Upstream
 package/python-crossbar/0002-requirements-min.txt-drop-indirect-dependencies.patch Upstream
 package/python-crossbar/0003-crossbar-webservice-wap-use-markupsafe-instead-of-we.patch Upstream
 package/python-daphne/0001-remove-pytest-runner-requirement.patch Upstream
+package/python-dnspython/0001-Remove-spurious-wheel-build-dependency.patch Upstream
+package/python-hiredis/0001-setup.py-fix-build-with-gcc-4.8.patch Upstream
+package/python-m2crypto/0001-Mitigate-the-Bleichenbacher-timing-attacks-in-the-RSA-decryption-API-CVE-2020-25657.patch Upstream
 package/python-pybind/0001-pybind11-commands.py-support-STAGING_DIR.patch Upstream
 package/python-pylibftdi/0001-do-not-use-find-library.patch Upstream
 package/python-pyqt5/0001-configure-skip-qtdetail.patch Upstream
@@ -1181,6 +1329,7 @@ package/qt5/qt5enginio/0001-Do-not-use-deprecated-QLinkedList.patch Upstream
 package/qt5/qt5location/0001-3rdparty-mapbox-gl-native-fix-musl-compile-pthread_g.patch Upstream
 package/qt5/qt5script/0001-Detect-32-bits-armv8-a-architecture.patch Upstream
 package/qt5/qt5tools/0001-Disable-designer-tool-fixes-configure-error.patch Upstream
+package/qt5/qt5wayland/0001-Add-missing-define-guards.patch Upstream
 package/qt5/qt5webengine-chromium/0001-Add-python3-build-support.patch Upstream
 package/qt5/qt5webengine-chromium/0002-Don-t-rebase-sysroot-path.patch Upstream
 package/qt5/qt5webengine/0001-gn.pro-don-t-link-statically-with-libstc.patch Upstream
@@ -1197,7 +1346,10 @@ package/quagga/0002-lib-prefix.h-fix-build-with-gcc-10.patch Upstream
 package/quagga/0003-Fix-build-with-gcc-10.patch Upstream
 package/quotatool/0001-fix-missing-__P-definition-for-musl-compile.patch Upstream
 package/racehound/0001-Fix-module-install-path-lib-instead-of-usr-lib-prefi.patch Upstream
+package/ranger/0001-colorscheme-check-for-compiled-python-files.patch Upstream
 package/rapidxml/0001-ensure-internal-print-operations-are-declared-before.patch Upstream
+package/raptor/0002-Calcualte-max-nspace-declarations-correctly-for-XML-.patch Upstream
+package/raptor/0003-XML-Writer-compare-namespace-declarations-correctly.patch Upstream
 package/raspberrypi-usbboot/0001-Makefile-allow-passing-CFLAGS-LDFLAGS.patch Upstream
 package/rdesktop/0001-8bit-colors.patch Sob Upstream
 package/read-edid/0001-Fix-install-file-list.patch Upstream
@@ -1208,6 +1360,7 @@ package/redis/0001-uclibc.patch Upstream
 package/redis/0002-largefile-conditional-define.patch Upstream
 package/redis/0003-redis.conf-adjust-defauts-for-buildroot.patch Upstream
 package/redis/S50redis Shellcheck Variables
+package/resiprocate/0001-Fix-some-issue-compiling-with-Visual-Studio.patch Upstream
 package/restorecond/S02restorecond Shellcheck
 package/ripgrep/0001-puts-jemalloc-allocator-behind-a-cargo-feature-flag.patch Upstream
 package/riscv-isa-sim/0001-riscv-disable-precompiled-headers.patch Upstream
@@ -1225,6 +1378,7 @@ package/rpi-userland/0006-interface-vcos-pthreads-CMakeLists.txt-fix-build-wit.p
 package/rpi-userland/0007-GLES2-gl2ext.h-add-GLint64-GLuint64-and-GLsync-typed.patch Upstream
 package/rt-tests/0001-Fix-a-build-issue-with-uClibc-ng.patch Upstream
 package/rt-tests/0002-Makefile-drop-explicit-undefine-PYLIB-for-compatibil.patch Upstream
+package/rtl8192eu/0002-Fix-conflicting-get_ra-on-PowerPC.patch Upstream
 package/rtl_433/0001-CMakeLists.txt-use-pkg-config-to-detect-openssl-when.patch Upstream
 package/rtl_433/0002-minor-Fix-mongoose-build-without-threads.patch Upstream
 package/rtmpdump/0001-include-limits.h.patch Upstream
@@ -1244,12 +1398,12 @@ package/samba4/0002-build-find-pre-built-heimdal-build-tools-in-case-of-.patch U
 package/samba4/0003-ldap_message_test.c-include-stdint.h-before-cmoka.h.patch Upstream
 package/samba4/S91smb Indent Shellcheck Variables
 package/sane-backends/0001-sane_backend-add-missing-config.h.patch Upstream
-package/screen/0001-Do-not-use-memcpy-as-an-alternative-for-bcopy-memmov.patch Upstream
-package/screen/0002-Do-not-create-backup-of-old-installed-binary.patch Upstream
-package/screen/0003-Change-binary-permission-flags-even-if-chown-fails.patch Upstream
-package/screen/0004-Support-overriding-SCREEN-to-get-a-non-versioned-bin.patch Upstream
-package/screen/0005-Renamed-sched.h-to-eventqueue.h.patch Upstream
-package/screen/0006-comm.h-now-depends-on-term.h.patch Upstream
+package/screen/0001-no-memcpy-fallback.patch Upstream
+package/screen/0002-install-no-backup-binary.patch Upstream
+package/screen/0003-install-always-chmod.patch Upstream
+package/screen/0004-install-nonversioned-binary.patch Upstream
+package/screen/0005-rename-sched_h.patch Upstream
+package/screen/0006-comm-h-now-depends-on-term-h.patch Upstream
 package/screen/0007-comm.h-needed-for-list_-display-generic-.o.patch Upstream
 package/scrub/0001-configure-ac-make-sure-m4-macros-are-included-in-the-build.patch Upstream
 package/sdl/0001-use-correct-directfb-config.patch Upstream
@@ -1268,6 +1422,8 @@ package/ser2net/S50ser2net Indent Shellcheck Variables
 package/setools/0001-Do-not-export-use-setools.InfoFlowAnalysis-and-setoo.patch Upstream
 package/setserial/0001-build-system-fix.patch Upstream
 package/setserial/0002-tiocghayesesp-build-fix.patch Upstream
+package/sg3_utils/0001-src-sg_dd.c-fix-musl-build.patch Upstream
+package/sg3_utils/0002-configure.ac-fix-uclibc-ng-build.patch Upstream
 package/shadowsocks-libev/0001-configure.ac-use-pkg-config-to-find-netfilter_conntr.patch Upstream
 package/shadowsocks-libev/0002-fix-maybe-uninitialized-errors.patch Upstream
 package/shadowsocks-libev/0003-lib-Makefile.am-remove-static-from-LDFLAGS.patch Upstream
@@ -1283,6 +1439,7 @@ package/smcroute/S41smcroute Indent NotExecutable Variables
 package/smstools3/0001-fix-Makefile.patch Upstream
 package/smstools3/0002-fix-build-with-gcc-10.x.patch Upstream
 package/smstools3/S50smsd Shellcheck Variables
+package/snappy/0001-Add-inline-with-SNAPPY_ATTRIBUTE_ALWAYS_INLINE.patch Upstream
 package/snmppp/0001-fix-build-without-v3.patch Upstream
 package/snort/0001-configure.in-Avoid-path-poisoning-with-libpcap.patch Upstream
 package/snort/0002-configure.in-Allow-to-override-the-INADDR_NONE-check.patch Upstream
@@ -1314,6 +1471,7 @@ package/sox/0005-configure.ac-fix-static-linking-with-sndfile.patch Upstream
 package/sp-oops-extract/0001-Make-the-Makefile-more-cross-compiler-friendly.patch Upstream
 package/sp-oops-extract/0002-stdint-cleanup.patch Upstream
 package/spandsp/0001-configure.ac-fix-AVX-SSE-and-MMX-options.patch Upstream
+package/speechd/0001-add-disable-doc.patch Upstream
 package/speex/0001-thumb2-support.patch Upstream
 package/squid/S97squid Indent Shellcheck Variables
 package/sredird/0001-termio.patch Upstream
@@ -1323,15 +1481,20 @@ package/sslh/S35sslh Indent Shellcheck Variables
 package/start-stop-daemon/0001-add-uclibc-alias-and-musl.patch Upstream
 package/start-stop-daemon/0002-just-warn-on-missing-arch.patch Upstream
 package/statserial/0001-ncurses-link.patch Upstream
+package/stellarium/0001-add-missing-include.patch Upstream
 package/stunnel/S50stunnel Indent Shellcheck Variables
 package/sudo/0001-configure.ac-fix-openssl-static-build.patch Upstream
 package/supervisor/S99supervisord Variables
-package/suricata/0001-configure.ac-allow-the-user-to-override-RUST_TARGET.patch Upstream
+package/suricata/0001-python-ensure-proper-shabang-on-python-scripts.patch Upstream
+package/suricata/0002-configure.ac-allow-the-user-to-override-RUST_TARGET.patch Upstream
 package/suricata/S99suricata Shellcheck
 package/swupdate/swupdate.sh Shellcheck
 package/sylpheed/0001-harden-link-checker-before-accepting-click.patch Upstream
+package/syslog-ng/0001-fix-build-on-uclibc.patch Upstream
 package/sysprof/0001-define-NT_GNU_BUILD_ID.patch Upstream
 package/sysrepo/S51sysrepo-plugind Indent Shellcheck
+package/system-config-printer/0001-Add-option-to-disable-xmlto-manual-generation.patch Upstream
+package/system-config-printer/0002-configure-accept-non-system-cups-config.patch Upstream
 package/sysvinit/0001-Makefile-disable-stack-protector-strong.patch Upstream
 package/tar/0001-lib-getrandom.c-fix-build-with-uclibc-1.0.35.patch Upstream
 package/targetcli-fb/S50target Shellcheck Variables
@@ -1339,7 +1502,7 @@ package/taskd/0001-Fix-missing-cmakedefine-HAVE_GET_CURRENT_DIR_NAME.patch Upstr
 package/taskd/0002-Use-correct-variables-for-GnuTLS-detection.patch Upstream
 package/taskd/0003-CMakeLists-use-pkg-config-uuid-detection.patch Upstream
 package/tcf-agent/S55tcf-agent Shellcheck Variables
-package/tcl/0001-Disable-tcl-compatibility-layers.patch Upstream
+package/tcl/0001-dont-build-compat.patch Upstream
 package/tesseract-ocr/0001-Check-if-platform-supports-feenableexcept.patch Upstream
 package/tesseract-ocr/0002-configure.ac-fix-build-on-aarch64_be.patch Upstream
 package/tftpd/0001-Use-extern-qualifier-to-fix-gcc-10.x-build.patch Upstream
@@ -1359,6 +1522,10 @@ package/tinydtls/0001-sha2-sha2.c-fix-build-on-big-endian.patch Upstream
 package/tinymembench/0001-arm-fix-build-on-Thumb-only-architectures.patch Upstream
 package/tinyproxy/0001-prevent-junk-from-showing-up-in-error-page-in-invalid-requests.patch Upstream
 package/tinyxml/0001-In-stamp-always-advance-the-pointer-if-p-0xef.patch Upstream
+package/tor/0001-patch-src_lib_crypt_ops_crypto_dh_openssl_c.patch Upstream
+package/tor/0002-patch-src_lib_crypt_ops_crypto_rsa_openssl_c.patch Upstream
+package/tor/0003-patch-src_lib_tls_x509_openssl_c.patch Upstream
+package/tovid/0001-manpage.patch Upstream
 package/tpm2-abrmd/S80tpm2-abrmd Indent Shellcheck Variables
 package/tpm2-tss/0001-Temporary-fix-for-build-without-C.patch Upstream
 package/transmission/S92transmission ConsecutiveEmptyLines Indent Shellcheck Variables
@@ -1379,12 +1546,14 @@ package/uboot-tools/0003-tools-Makefile-fix-C-LD-FLAGS-with-CROSS_BUILD_TOOLS.pa
 package/ubus/0001-Install-server-and-client-examples.patch Upstream
 package/udpcast/0001-fix-musl-build.patch Upstream
 package/uemacs/01-clear-ixon-termios-flag.patch Upstream
+package/uftrace/0001-cmds-records-replace-ADDR_NO_RANDOMIZE-by-its-value.patch Upstream
 package/uhd/0001-host-CMakeLists-add-boost-unit_test_framework-requir.patch Upstream
 package/uhttpd/0001-Remove-Werror.patch Upstream
 package/uhttpd/0002-Fix-TCP_FASTOPEN-related-compile-error.patch Upstream
 package/umtprd/0001-Fix-output_dir-make-dependency.patch Upstream
 package/unbound/S70unbound Shellcheck
 package/unifdef/0001-Makefile-fix-error-on-install.patch Upstream
+package/unixodbc/0001-DriverManager-drivermanager.h-fix-build-without-thre.patch Upstream
 package/unscd/S46unscd Indent Shellcheck Variables
 package/unzip/0001-Add-a-CMakeFile.txt-to-ease-cross-compilation.patch Upstream
 package/upmpdcli/S99upmpdcli Indent Shellcheck Variables
@@ -1399,6 +1568,7 @@ package/ushare/0001-Don-t-build-po-files-if-NLS-is-disabled.patch Upstream
 package/ussp-push/0001-fix-build-against-bluez-4.patch Upstream
 package/ussp-push/0002-fix-build-again-obex-bluez.patch Upstream
 package/ussp-push/0003-add-OBEX_CharToUnicode.patch Upstream
+package/util-linux/0001-lsns-improve-dependence-on-NS_GET_-ioctls.patch Upstream
 package/vala/0001-dont-add-dirty-to-valac-version.patch Upstream
 package/vala/vala-wrapper Shellcheck
 package/valgrind/0001-workaround-SIGSEGV-on-PPC.patch Upstream
@@ -1410,6 +1580,9 @@ package/vboot-utils/0004-Disable-static-futility.patch Upstream
 package/vboot-utils/0005-include-sys-sysmacros.h-for-major.patch Upstream
 package/vboot-utils/0006-Update-for-openssl-1.1.patch Upstream
 package/vboot-utils/0007-Make-vboot_version-extern-in-header.patch Upstream
+package/vde2/0001-no-cxx.patch Upstream
+package/vde2/0002-fstp-Add-static-to-inline-functions.patch Upstream
+package/vde2/0003-vde_l3-Add-static-to-inline-functions.patch Upstream
 package/vdr/0001-getloadavg.patch Upstream
 package/vlc/0001-Disable-building-of-statically-linked-vlc-binary.patch Upstream
 package/vlc/0002-automake-add-subdir-objects-option.patch Upstream
@@ -1448,7 +1621,10 @@ package/wampcc/0001-Add-RISC-V-endian-detection.patch Upstream
 package/wampcc/0002-include-wampcc-platform.h-fix-build-with-musl-1.2.0.patch Upstream
 package/wampcc/0003-Broken-build-on-Windows.patch Upstream
 package/watchdogd/S01watchdogd Indent NotExecutable
+package/wavemon/0001-iw_if.h-don-t-include-linux-if.h.patch Upstream
+package/wayland-utils/0001-wayland-info-Fix-build-without-libdrm.patch Upstream
 package/webrtc-audio-processing/0001-Proper-detection-of-cxxabi.h-and-execinfo.h.patch Upstream
+package/weston/0001-tests-Add-dependency-on-screenshooter-client-protocol.patch Upstream
 package/wget/0001-lib-getrandom.c-fix-build-with-uclibc-1.0.35.patch Upstream
 package/wilc-driver/0001-cfg80211.c-fix-missing-prandom_u32-with-Linux-6.1.0.patch Upstream
 package/wilc-driver/0002-spi.c-fix-build-failure-on-remove-callback.patch Upstream
@@ -1499,6 +1675,7 @@ package/xenomai/3.0.10/0002-Add-disable-demo-testsuite-options.patch Upstream
 package/xenomai/3.0.10/0003-lib-cobalt-copperplate-Use-valid-addresses-for-pthread_setspecific.patch Upstream
 package/xfsprogs/0001-mdrestore-do-not-do-dynamic-linking-of-libtool-libra.patch Upstream
 package/xfsprogs/0002-libxfs-do-not-try-to-run-the-crc32selftest.patch Upstream
+package/xfsprogs/0003-libxfs-stop-overriding-MAP_SYNC-in-publicly-exported.patch Upstream
 package/xinetd/0001-ar.patch Upstream
 package/xinetd/0002-destdir.patch Upstream
 package/xinetd/0003-rpc-fix.patch Upstream
@@ -1506,15 +1683,23 @@ package/xinetd/0004-configure-rlim_t.patch Upstream
 package/xinetd/0005-CVE-2013-4342-xinetd-ignores-user-and-group-directiv.patch Upstream
 package/xl2tp/xl2tpd TrailingSpace
 package/xml-security-c/0001-fix-build-with-libressl-3.5.0.patch Upstream
+package/xvisor/0001-psmouse-back.c-fix-build-with-gcc-11.patch Upstream
+package/xxhash/0001-fix-man-page-installation.patch Upstream
+package/xxhash/0002-Makefile-add-dedicated-install-targets.patch Upstream
+package/xxhash/0003-do-no-longer-depend-on-assert-h-for-XXH_STATIC_ASSERT.patch Upstream
+package/xxhash/0004-Makefile-add-install_libxxhash.includes-target.patch Upstream
 package/yajl/0001-Let-the-shared-and-the-static-library-have-the-same-.patch Upstream
 package/yajl/0002-cmake-disable-shared-library-build-when-BUILD_SHARED.patch Upstream
 package/yajl/0003-Link-with-shared-libyajl-in-a-shared-build.patch Upstream
 package/yajl/0004-Link-libyajl-_s-with-libm-when-isnan-is-not-brought-.patch Upstream
 package/ympd/0001-only-c-language.patch Upstream
 package/ympd/0002-added-forward-declarations.patch Upstream
+package/ytree/0001-fix-musl.patch Upstream
 package/zabbix/0001-m4-netsnmp.m4-fix-shared-netsnmp-build.patch Upstream
 package/zabbix/0002-fix-build-with-libressl-3.5.0.patch Upstream
 package/zbar/0001-python-enum-fix-build-for-Python-3.11.patch Upstream
+package/zchunk/0001-meson-fix-argp-standalone-wrap-and-find_library.patch Upstream
+package/zchunk/0002-zck-declare-write_data-as-static.patch Upstream
 package/zic/0001-remove-dependency-check-on-version-file.patch Upstream
 package/zip/0001-configure-Remove-Check-C-compiler-type-optimization-.patch Upstream
 package/zip/0002-configure-Don-t-use-host-CPP.patch Upstream
@@ -1524,6 +1709,9 @@ package/zip/0005-unix-configure-remove-GID-UID-size-check.patch Upstream
 package/zip/0006-unix-configure-borrow-the-LFS-test-from-autotools.patch Upstream
 package/zip/0007-timezone.c-needs-time.h-fixes-musl-compile.patch Upstream
 package/zip/0008-fix-musl-static-build.patch Upstream
+package/zlib-ng/0001-Use-static-keyword-for-vec_sumsu-to-prevent-undefine.patch Upstream
+package/zlib-ng/0002-CMakeLists.txt-fix-version-in-zlib.pc-when-building-.patch Upstream
+package/zlib-ng/0003-zlib-ng-check-that-sys-auxv.h-exists-at-configure-time.patch Upstream
 package/zmqpp/0001-Allow-building-shared-or-static-library-only.patch Upstream
 package/znc/0001-LibreSSL-3.5-opaqued-structures.patch Upstream
 package/znc/0002-Fix-build-with-libressl.patch Upstream
@@ -1544,10 +1732,12 @@ support/download/check-hash Shellcheck
 support/download/cvs Shellcheck
 support/download/dl-wrapper Shellcheck
 support/download/file Shellcheck
+support/download/git Shellcheck
 support/download/go-post-process Shellcheck
 support/download/hg Shellcheck
 support/download/scp Shellcheck
 support/download/sftp Shellcheck
+support/download/svn Shellcheck
 support/download/wget Shellcheck
 support/gnuconfig/update Shellcheck
 support/libtool/buildroot-libtool-v1.5.patch ApplyOrder Sob Upstream
@@ -1561,6 +1751,7 @@ support/scripts/check-bin-arch Shellcheck
 support/scripts/check-host-rpath Shellcheck
 support/scripts/expunge-gconv-modules Shellcheck
 support/scripts/fix-configure-powerpc64.sh EmptyLastLine
+support/scripts/fix-rpath Shellcheck
 support/scripts/generate-gitlab-ci-yml Shellcheck
 support/scripts/mkmakefile ConsecutiveEmptyLines Shellcheck
 support/scripts/mkusers Shellcheck

.editorconfig

@@ -1,29 +0,0 @@
-root = true
-
-[*]
-charset = utf-8
-end_of_line = lf
-indent_style = space
-indent_size = 4
-tab_width = 8
-trim_trailing_whitespace = true
-insert_final_newline = true
-
-[DEVELOPERS]
-indent_style = tab
-indent_size = tab
-
-[{Config*.in*,linux/Config.ext.in}]
-indent_style = tab
-indent_size = tab
-
-[{Makefile*,*.mk}]
-indent_style = tab
-indent_size = tab
-
-[S{0..9}{0..9}*]
-indent_style = tab
-indent_size = tab
-
-[*.adoc]
-trim_trailing_whitespace = false

.gitlab-ci.yml

@@ -10,11 +10,6 @@ stages:
 generate-gitlab-ci-yml:
   stage: generate-gitlab-ci
   script: ./support/scripts/generate-gitlab-ci-yml support/misc/gitlab-ci.yml.in > generated-gitlab-ci.yml
-  retry:
-    max: 2
-    when:
-      - runner_system_failure
-      - stuck_or_timeout_failure
   artifacts:
     when: always
     paths:

CHANGES

@@ -1,310 +1,3 @@
-2023.11-rc1, released November 14th, 2023
-
-	Fixes all over the tree and new features.
-
-	Architecture: MIPS IV (re-)added. The mutually exclusive ABI
-	selection dropped for PowerPC.
-
-	Toolchain:
-
-	- Support for GDB 13.2, make GDB 12.x the default
-
-	- Glibc bumped to 2.38
-
-	- Bootlin external toolchains updated to 2023.08, bringing
-          support for Aarch64 BE with musl.
-
-	- Motorola 68K w/MMU support added for glibc and musl.
-
-	- License info added for GCC
-
-	Infrastructure:
-
-	- The CMake infrastructure now supports building packages with
-          ninja instead of make (based on <pkg>_CMAKE_BACKEND).
-
-	- The RPATH fixup done at the end of the build is now done in
-          parallel (according to BR2_JLEVEL).
-
-	- Packages downloaded from Subversion repos no longer
-          retrieves svn:externals unless <pkg>_SVN_EXTERNALS is set to
-          YES.
-
-	- Packages where a free-form version/site can be specified
-          (E.G. Linux, U-Boot, ..) can now have the corresponding
-          tarballs of these custom downloads checked by the download
-          infrastructure based on .hash files in the global patch
-          directory. These hashes are optional unless
-          BR2_DOWNLOAD_FORCE_CHECK_HASHES is enabled.
-
-	  A utils/add-custom-hashes helper script has been added to
-          assist in managing such hash files.
-
-	- Various improvements to utils/docker-run to handle external
-          (BR2_DL_DIR defined in environment) download directory,
-          proxy configuration, SELinux and out of tree (O=) builds.
-
-	New defconfigs: AMD Zynq ZC702, ASUS Tinker-s rk3288, ICnova
-	A20-adb4006, Khadas vim3, Libre Computer ROC-RK3399-PC,
-	Microchip PolarFire SoC Icicle Kit, NXP imxrt1050-evk, Pine64
-	pinecube, Sipeed LicheePi Nano, Synopsys ARC700 nSIM, TI
-	SK-AM62 and TI SK-AM64
-
-	New packages: ti-k3-boot-firmware, ti-k3-image-gen,
-	amlogic-boot-fip, criu, cutekeyboard, depot-tools, fft-eval,
-	firewalld, flutter-engine, flutter-gallery, flutter-pi,
-	flutter-sdk-bin, ledmon, libcanberra, libnvme, libsoup3,
-	libspdm, libucontext, libzenoh-pico,
-	microchip-hss-payload-generator, nodejs-bin, nushell,
-	nvidia-persistenced, oatpp, onevpl-intel-gpu, onevpl,
-	python-calver, python-distlib, python-jeepney,
-	python-jsonschema-specifications, python-kmod,
-	python-pysensors, python-referencing, python-segno,
-	python-tftpy, python-trove-classifiers,
-	python-types-python-dateutil, python-versioneer,
-	qoriq-fm-ucode, qt6core5compat, rauc-hawkbit-updater,
-	rust-bindgen, spirv-headers, spirv-tools, vulkan-loader,
-	vulkan-tools
-
-	Removed packages: google-material-design-icons, libtextstyle,
-	python-pyxb
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#14366: Nodejs fails with "version `GLIBC_2.34' not found"..
-	#14741: e2fsck is failing during cronjob build where fail...
-	#15628: Missing dependencies in BR2_PACKAGE_PYTHON_MAKO
-	#15733: xfsprogs outdated
-	#15772: lz4 failed to compile with gcc 10.4.0
-	#15778: strace comilation fails on Fedora39/gcc13
-	#15787: atmel_sama5d3_xplained_mmc_defconfig: Missing...
-	#15790: at91sam9x5ek_dev_defconfig: Missing...
-	#15808: connman is not supported on musl
-	#15814: C++ not supported by bootlin toolchain
-	#15820: make linux-menuconfig does not modify correct .config..
-	#15823: Installing nodejs modules with native extensions ...
-	#15826: nodejs modules with native extensions fail to install
-	#15835: Incompatibility between network-manager and libcurl 8.4
-
-2023.08.2, released October 15th, 2023
-
-	Important / security related fixes.
-
-	Defconfigs: Freescale ARM: Add ATF patch to fix build issue
-	with binutils 2.39+.  QEMU Aarch64-virt: Enable ACPI support
-	for EDK2. Visionfive2: Bump kernel to fix build issue with GCC
-	13.
-
-	Per-package builds: Do not use hard links for host / target
-	dirs, fixing issues with package rebuilds or post-build
-	scripts modifications.
-
-	Infrastructure: Explicitly disable shuffle mode for Make >=
-	4.4 where needed.
-
-	Urandom-scripts: Move seedrng init script to S01 for earlier
-	random number entrophy initialization.
-
-	Updated/fixed packages: at91bootstrap, batman-adv, bind, cups,
-	efl, enlightenment, exim, gcc, glibc, gnu-efi, go, gptfdisk,
-	grub2, gst-omx, gst1-devtools, gst1-libav, gst1-plugins-bad,
-	gst1-plugins-base, gst1-plugins-good, gst1-plugins-ugly,
-	gst1-python, gst1-rstp-server, gst1-rtsp-vaapi, gstreamer1,
-	gstreamer1-editing-services, gtkmm3, libcue, libcurl,
-	libfastjson, libhtp, libmodplug, librsvg, libvpx, libyang,
-	linux-pam, linux-tools, mbedtls, mosquitto, mutt, neon,
-	netsnmp, nmap, nodejs, olsr, openblas, opkg-utils, php, pound,
-	powertop, python-mako, python3, rauc, rockchip-mali, samba4,
-	sslh, stress-ng, suricata, syslog-ng, systemd, tar, unifdef,
-	urandom-scripts, usbguard, webkitgtk, wilc-driver,
-	wireless-regdb, wpewebkit
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#15628: Missing dependencies in BR2_PACKAGE_PYTHON_MAKO
-	#15808: connman is not supported on musl
-	#15814: C++ not supported by bootlin toolchain
-
-2023.08.1, released September 27th, 2023
-
-	Important / security related fixes.
-
-	Updated/fixed packages: agentpp, asterisk, bind, binutils,
-	conmon, cpio, docker-cli, docker-engine, e2fsprogs, erlang,
-	esp-hosted, expect, fail2ban, fio, freerdp, fstrcmp, gcc, gdb,
-	ghostscript, go, haproxy, hwloc, icu, irssi, libcoap, libcurl,
-	libde265, libheif, libiec61850, libjxl, libopenssl, libpjsip,
-	libqb, libraw, libssh, libuv, lldpd, mdadm, mutt, ne10,
-	netatalk, nodejs, nut, openblas, opensc, openvpn, petitboot,
-	php, pound, pppd, python-pytest, python3, qt5,
-	rtl8812au-aircrack-ng, sngrep, stress-ng, strongswan, sysstat,
-	tar, tcl, timescaledb, util-linux, vim, webkitgtk, webp,
-	wireshark, xserver_xorg-server, xterm, zbar, zxing-cpp,
-	zynaddsubfx
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#14366: Nodejs fails with "version `GLIBC_2.34' not found"..
-	#15787: atmel_sama5d3_xplained_mmc_defconfig: Missing...
-	#15790: at91sam9x5ek_dev_defconfig: Missing...
-
-2023.08, released September 6th, 2023
-
-	Various fixes.
-
-	Defconfigs: BeagleV: Fix build issue with binutils >=
-	2.38. Hifive unleashed: U-Boot needs OpenSSL
-
-	Updated/fixed packages: dt, grub2, heirloom-mailx, libgpgme,
-	libtommath, libxcrypt, log4cxx, mesa3d-demos, openjdk,
-	openjdk-bin, pam, pcm-tools, pixman, poppler, python-django,
-	python-ipython, python-pip, python-tornado, zeromq
-
-	New packages: libdecor
-
-2023.08-rc3, released August 29th, 2023
-
-	Fixes all over the tree.
-
-	Defconfigs: Avenger96: Bump ATF to 2.9 to fix build warnings
-	with binutils >= 2.39. CI20: Bump kernel to 5.4.254 to fix
-	build issue with GCC 12. Hifive unleashed: Add missing
-	pylibfdt dependency / bump kernel to 5.10.109 to fix build
-	issue GCC 12. PC x86-64 bios/elf: Add missing libelf
-	dependency. Sipeed maix sdcard: Fix build issues with
-	binutils >= 2.38
-
-	Updated/fixed packages: check, clamav, cups, esp-hosted,
-	f2fs-tools, freeswitch, gcc, gmp, libks, libmodsecurity,
-	mosquitto, mpg123, network-manager, php, postgresql, python3,
-	ramspeed, rtl8189fs, rust, rust-bin, samba4, screen, zlib-ng
-
-2023.08-rc2, released August 20th, 2023
-
-	Fixes all over the tree.
-
-	Toolchains: Only show external toolchains based on a GCC
-	version supporting the selected architecture
-	variant. Correctly mark Codescape MIPS external toolchains as
-	not providing a gdbserver.
-
-	Defconfigs: Andes ae350_45: Drop custom U-Boot march setting,
-	breaking builds with GCC 12. Nitrogen*: Bump
-	U-Boot/Linux. Nitrogen8*: Use ATF 2.8, fixing array bounds
-	errors. QEMU m68k: Add Linux patch to fix build issue with
-	binutils >= 2.41. Raspberrypi*: Enable console on HDMI when
-	using systemd as well.
-
-	Updated/fixed packages: at91dataflashboot, aubio, berkeleydb,
-	bwm-ng, ccache, check, chocolate-doom, compiler-rt, composer,
-	conmon, connman, dav1d, diffutils, dracut, e2fsprogs, elf2flt,
-	esp-hosted, flite, gcc, gdb, go-bootstrap-stage2,
-	intel-microcode, kodi-imagedecoder-heif, less, libcoap,
-	libedit, libglib2, libksba, liblo, libserial, log4cxx, lsof,
-	luvi, meson, mosquitto, mpd, mpv, mv-ddr-marvell, nftables,
-	ntpsec, openssh, optee-test, perftest, python-botocore,
-	python-docker, python-pylibfdt, python3, screenfetch,
-	sentry-cli, sngrep, stellarium, trinity, tvheadend, uboot,
-	uclibc, util-linux, xfsprogs, yajl
-
-	New packages: nftables-python, xlib_libXpresent
-
-	Removed packages: lpc32xxcdl
-
-2023.08-rc1, released August 5, 2023
-
-	Numerous package updates and fixes, additional runtime tests.
-
-	Toolchain:
-	- Toolchains from ARM (for ARM, AArch64 and AArch64 BE)
-          updated to 12.2.
-	- Support for binutils 2.40 and 2.41 added, binutils 2.37 and
-          2.38 removed, binutils 2.40 is now the default
-	- Support for gcc 13 added, gcc 10 removed, gcc 12 is now the
-          default
-
-	Architectures:
-	- Additional x86-64 variants added
-	- RISC-V vector extension support added
-
-	Infrastructure:
-	- Go now built in 3 stages to be able to update to Go 1.20.x.
-
-	New defconfigs: rock5b
-
-	Removed defconfigs: qemu_sparc_ss10
-
-	New packages: composer, conmon, dfu-programmer, esp-hosted,
-	kodi-imagedecoder-heif, kodi-imagedecoder-raw, libde2654,
-	libdisplay-info, libheif, llvm-cmake, llvm-libunwind,
-	lua-dkjson, mbpoll, mdnsd, mhz, opencsd, python-libconf,
-	python-blinker, python-midiutil, python-rdps-py, python-wheel,
-	qt6svg, redis-plus-plus, rockchip-rkbin, rtl8822cs, swaybg,
-	swugenerator
-
-	Removed packages: libasplib, ocf-linux, tovid
-
-2023.05.3, released September 26th, 2023
-
-	Important / security related fixes.
-
-	Defconfigs: PC x86-64 bios/efi: Needs libelf. Raspberrypi:
-	Also enable HDMI console when systemd is used.
-
-	Updated/fixed packages: agentpp, asterisk, at91dataflashboot,
-	aubio, berkeleydb, bind, bwm-ng, chocolate-doom, clamav,
-	compiler-rt, connman, cpio, cups, dav1d, diffutils, dracut,
-	dt, expect, fail2ban, fio, flite, freerdp, freeswitch,
-	fstrcmp, gcc, gdb, ghostscript, gmp, go, grub2, haproxy,
-	heirloom-mailx, hwloc, icu, intel-microcode, irssi, less,
-	libcoap, libcurl, libglib2, libiec61850, libjxl, libks,
-	libksba, libmodsecurity, libpjsip, libqb, libraw, libssh,
-	libtommath, lldpd, log4cxx, lsof, mdadm, mosquitto, mpd, mpv,
-	mutt, mv-ddr-marvell, ne10, netatalk, network-manager,
-	nftables, nodejs, ntpsec, nut, openblas, openjdk, openjdk-bin,
-	opensc, openssh, pcm-tools, perftest, petitboot, php, pixman,
-	poppler, postgresql, python-django, python-ipython,
-	python-pip, python-pylibfdt, python-tornado, python3, qt5,
-	ramspeed, rtl8189fs, rtl8812au-aircrack-ng, samba4, screen,
-	screenfetch, sngrep, sofia-sip, stellarium, stress-ng,
-	strongswan, sysstat, tar, tcl, uboot, uclibc, vim, webkitgtk,
-	webp, wireshark, xfsprogs, xserver_xorg-server, xterm, yajl,
-	zbar, zxing-cpp
-
-	New packages: xlib_libXpresent
-
-2023.05.2, released August 31th, 2023
-
-	Important / security related fixes.
-
-	Toolchains: Correctly mark Bootlin external toolchains as
-	having OpenMP support.
-
-	Arch: Mark Alderlake x86 variants as no AVX512 support.
-
-	Utils: Ensure utils/docker-run correctly supports git
-	worktrees.
-
-	Defconfigs: Beaglebone: U-Boot needs OpenSSL. Beaglebone qt5:
-	Enable support for green wireless variant.
-
-	Updated/fixed packages: arm-trusted-firmware, bind, cairo,
-	cmocka, containerd, crudini, cryptodev-linux, dmidecode,
-	ffmpeg, firmware-imx, gcc, gdb, ghostscript, gkrellm,
-	gnuradio, go, igh-ethercat, iperf3, kodi, libcurl, libopenssl,
-	libssh, libubootenv, libuhttpd, linux-tools, mali-driver,
-	nfs-utils, ntp, openssh, php, pipewire, python-pysmb,
-	python-iniparse, python-iptables, rtl8189es, rtl8189fs,
-	sam-ba, samba4, seatd, shadow, speex,
-	sunxi-mali-utgard-driver, supertuxkart, sysdig, systemd, tor,
-	tpm2-tss, transmission, uboot, unzip, webkitgtk,
-	wireless-regdb, wolfssl, wpebackend-fdo, wpewebkit, xenomai,
-	yaml-cpp, yavta
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#15634: fluidsynths refers to missing libgomp.so.1
-
 2023.05.1, released July 17th, 2023
 
 	Important / security related fixes.
@@ -410,165 +103,6 @@
 	#15376: Libiconv config
 	#15461: QtVirtualKeyboard segfaults
 
-2023.02.6, released October 16th, 2023
-
-	Important / security related fixes.
-
-	Per-package builds: Do not use hard links for host / target
-	dirs, fixing issues with package rebuilds or post-build
-	scripts modifications.
-
-	Infrastructure: Explicitly disable shuffle mode for Make >=
-	4.4 where needed.
-
-	Urandom-scripts: Move seedrng init script to S01 for earlier
-	random number entrophy initialization.
-
-	Go: Bump to 1.20.x as 1.19.x is now EOL and affected by
-	security issues.
-
-	Updated/fixed packages: at91bootstrap, bind, cups, efl,
-	enlightenment, exim, gcc, glibc, gnu-efi, go, go-bootstrap,
-	gptfdisk, gst-omx, gst1-devtools, gst1-libav,
-	gst1-plugins-bad, gst1-plugins-base, gst1-plugins-good,
-	gst1-plugins-ugly, gst1-python, gst1-rstp-server,
-	gst1-rtsp-vaapi, gstreamer1, gstreamer1-editing-services,
-	libcue, libcurl, libfastjson, libhtp, libmodplug, librsvg,
-	libvpx, libyang, linux-tools, mbedtls, mosquitto, mutt, neon,
-	netsnmp, nmap, nodejs, olsr, openblas, opkg-utils, php,
-	powertop, python-mako, python3, rockchip-mali, samba4, sslh,
-	suricata, tar, unifdef, unrandom-scripts, webkitgtk,
-	wireless-regdb, wpewebkit
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#15628: Missing dependencies in BR2_PACKAGE_PYTHON_MAKO
-	#15808: connman is not supported on musl
-	#15814: C++ not supported by bootlin toolchain
-
-2023.02.5, released September 27th, 2023
-
-	Important / security related fixes.
-
-	Updated/fixed packages: agentpp, asterisk, at91dataflashboot,
-	aubio, berkeleydb, bind, bwm-ng, chocolate-doom, clamav,
-	compiler-rt, connman, cups, dav1d, diffutils, dracut, dt,
-	expect, fail2ban, fio, flite, freerdp, freeswitch, fstrcmp,
-	gcc, gdb, ghostscript, gmp, go, grub2, haproxy,
-	heirloom-mailx, hwloc, icu, intel-microcode, irssi, libcoap,
-	libcurl, libiec61850, libjxl, libks, libksba, libmodsecurity,
-	libpjsip, libqb, libraw, libssh, libtommath, less, lldpd,
-	log4cxx, lsof, mdadm, mosquitto, mpd, mutt, mv-ddr-marvell,
-	ne10, netatalk, network-manager, nftables, nodejs, ntpsec,
-	nut, openblas, openjdk, openjdk-bin, opensc, openssh,
-	pcm-tools, perftest, php, pixman, poppler, postgresql, pppd,
-	python-django, python-ipython, python-pip, python-pylibfdt,
-	python-tornado, python3, qt5, ramspeed, rtl8189fs, samba4,
-	screen, screenfetch, sngrep, sofia-sip, stellarium,
-	strongswan, sysstat, tar, tcl, uboot, uclibc, vim, webkitgtk,
-	webp, wireshark, xfsprogs, xserver_xorg-server, xterm, yajl,
-	zbar, zxing-cpp
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#14366: Nodejs fails with "version `GLIBC_2.34' not found"..
-	#15754: The docker-engine and docker-cli versions are not...
-	#15787: atmel_sama5d3_xplained_mmc_defconfig: Missing...
-	#15790: at91sam9x5ek_dev_defconfig: Missing...
-
-2023.02.4, released August 31th, 2023
-
-	Important / security related fixes.
-
-	Toolchains: Correctly mark Bootlin external toolchains as
-	having OpenMP support.
-
-	Arch: Mark Alderlake x86 variants as having no AVX512 support.
-
-	Utils: Ensure utils/docker-run correctly supports git
-	worktrees.
-
-	Defconfigs: Beaglebone qt5: Enable support for green wireless
-	variant.
-
-	Updated/fixed packages: arm-trusted-firmware, bind, cairo,
-	cmocka, containerd, crudini, dmidecode, ffmpeg, freescale-imx,
-	gcc, gdb, ghostscript, gkrellm, gnuradio, go, heimdall,
-	iperf3, libcurl, libmodsecurity, libopenssl, libssh,
-	libubootenv, libuhttpd, linux-tools, ntp, openssh, php,
-	pipewire, python-iniparse, python-iptables, python-pysmb,
-	rtl8189fs, sam-ba, samba4, seatd, speex, supertuxkart, sysdig,
-	tor, tpm2-tss, uboot, unzip, webkitgtk, wireless-regdb,
-	wolfssl, wpebackend-fdo wpewebkit, xenomai, yaml-cpp, yavta
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#15634: fluidsynths refers to missing libgomp.so.1
-
-2023.02.3, released July 17th, 2023
-
-	Important / security related fixes.
-
-	Defconfigs: Chiliboard: fix build on hosts without openssl
-	development headers.
-	Nitrogen*: fix build on hosts without openssl or pylibfdt.
-	Raspberrypi: Handle DTB overlays for all variants
-
-	Updated/fixed packages: agentpp, alsa-plugins, assimp, bind,
-	busybox, dbus, c-ares, check, dav1d, fluidsynth, fftw, fwts,
-	ghostscript, gnupg2, gnuradio, gupnp, haproxy, heimdal,
-	hwdata, jhead, libcap, libgcrypt, libgpg-error, libgtk3,
-	libxslt, mesa3d-demos, mpir, nodejs, php, pkgconf,
-	python-cryptography, python-dbus-fast, python-django,
-	python-pyicu, python-requests, python3, qt6, quickjs,
-	sconeserver, taglib, tiff, wireshark, xdriver_xf86-video-dummy
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#15643: ERROR: No hash found for linux-6.3.8.tar.xz
-	#15673: PKGCONF_SITE in pkgconf.mk points to parked domain
-	#15682: pkgconf: no longer able to download source from...
-
-2023.02.2, released June 16th, 2023
-
-	Important / security related fixes.
-
-	Infrastructure: Add BR2_HOST_CMAKE_AT_LEAST_* for packages
-	needing a newer host-cmake than what is currently enforced
-	(3.18) - Up to the version provided by the cmake package (3.22).
-
-	utils/docker-run: Now correctly handles git
-	workdirs/worktrees.
-
-	Defconfigs: QEMU s390x: Bump rootfs size to make room for
-	kernel modules, Stm32f4xx: Tweak config to save RAM, Xilinx
-	Versal vck190: Use correct (A72) CPU variant
-
-	Updated/fixed packages: atkmm, bird, busybox, cairomm1_14,
-	cmake, containerd, crudini, cups, delve, docker-cli,
-	docker-engine, earlyoom, edid-decode, fluent-bit, freeswitch,
-	gcc, gdb, glibmm_2_66, gnupg2, go, gptfdisk, graphicsmagick,
-	intel-microcode, libass, libcurl, libdeflate, libgeos,
-	libgtk3, libjxl, libnftl, libopenssl, libressl, libssh, llvm,
-	lua, mesa3d, micropython, minidlna, moby-buildkit, mpd, mupdf,
-	ncurses, nftables, openjdk, openjdk-bin, php, postgresql,
-	python-can, python-django, python-django, python-ipython,
-	python-matplotlib, python-mupdf, python-requests, python3,
-	qemu, redis, rpm, runc, sdl2_mixer, tzdata, uclibc, vdr,
-	wilc-firmware, xapp_xcalc, xapp_xdpyinfo, xapp_xinput,
-	xapp_xwininfo, xdata_xbitmaps, xdata_xcursor-themes,
-	xdriver_xf86-input-mouse, xdriver_xf86-video-ark,
-	xdriver_xf86-video-geode, xdriver_xf86-video-neomagic,
-	xfont_encodings, xlib_libX11, xlib_libXaw, xlib_libXi,
-	xlib_libXfixes, xlib_libXft, xlib_libXpm, zfs, znc
-
-	New packages: perl-clone, perl-http-message, python-asttokens,
-	python-executing, python-pure-eval, python-stack-data
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#15421: qemu_aarch64_ebbr_defconfig: Missing Linux kernel source code
-
 2023.02.1, released May 9th, 2023
 
 	Important / security related fixes.

Config.in

@@ -55,16 +55,6 @@ config BR2_HOST_GCC_AT_LEAST_9
 	default y if BR2_HOST_GCC_VERSION = "9"
 	select BR2_HOST_GCC_AT_LEAST_8
 
-config BR2_HOST_GCC_AT_LEAST_10
-	bool
-	default y if BR2_HOST_GCC_VERSION = "10"
-	select BR2_HOST_GCC_AT_LEAST_9
-
-config BR2_HOST_GCC_AT_LEAST_11
-	bool
-	default y if BR2_HOST_GCC_VERSION = "11"
-	select BR2_HOST_GCC_AT_LEAST_10
-
 # When adding new entries above, be sure to update
 # the HOSTCC_MAX_VERSION variable in the Makefile.
 
@@ -75,7 +65,7 @@ config BR2_NEEDS_HOST_JAVA
 
 # Hidden boolean selected by pre-built packages for x86, when they
 # need to run on x86-64 machines (example: pre-built external
-# toolchains, binary tools, etc.).
+# toolchains, binary tools like SAM-BA, etc.).
 config BR2_HOSTARCH_NEEDS_IA32_LIBS
 	bool
 
@@ -251,7 +241,7 @@ if !BR2_PRIMARY_SITE_ONLY
 
 config BR2_BACKUP_SITE
 	string "Backup download site"
-	default "https://sources.buildroot.net"
+	default "http://sources.buildroot.net"
 	help
 	  Backup site to download from. If this option is set then
 	  buildroot will fall back to download package sources from here
@@ -674,12 +664,12 @@ config BR2_PACKAGE_OVERRIDE_FILE
 	  documentation for more details on this feature.
 
 config BR2_GLOBAL_PATCH_DIR
-	string "global patch and hash directories"
+	string "global patch directories"
 	help
 	  You may specify a space separated list of one or more
-	  directories containing global package patches and/or hashes.
-	  For a specific version <packageversion> of a specific package
-	  <packagename>, patches are looked up as follows:
+	  directories containing global package patches. For a specific
+	  version <packageversion> of a specific package <packagename>,
+	  patches are applied as follows:
 
 	  First, the default Buildroot patch set for the package is
 	  applied from the package's directory in Buildroot.
@@ -693,8 +683,6 @@ config BR2_GLOBAL_PATCH_DIR
 	  exists, then all *.patch files in the directory will be
 	  applied.
 
-	  The hash files are looked up similarly to the patches.
-
 menu "Advanced"
 
 config BR2_FORCE_HOST_BUILD
@@ -709,23 +697,6 @@ config BR2_FORCE_HOST_BUILD
 
 	  This option will increase build time.
 
-config BR2_DOWNLOAD_FORCE_CHECK_HASHES
-	bool "Force all downloads to have a valid hash"
-	depends on BR2_GLOBAL_PATCH_DIR != ""
-	help
-	  For packages where a custom version or location can be set,
-	  Buildroot does not carry a hash for those custom versions or
-	  locations, so the integrity of such downloads is not verified.
-
-	  Say 'y' here to enforce downloads to have at least one valid
-	  hash (and of course, that all hashes be valid).
-
-	  Those hashes are looked in files in BR2_GLOBAL_PATCH_DIR,
-	  see above.
-
-comment "Forcing all downloads to have a valid hash needs a global patch and hash directory"
-	depends on BR2_GLOBAL_PATCH_DIR = ""
-
 config BR2_REPRODUCIBLE
 	bool "Make the build reproducible (experimental)"
 	# SOURCE_DATE_EPOCH support in toolchain-wrapper requires GCC 4.4
@@ -765,20 +736,6 @@ config BR2_PER_PACKAGE_DIRECTORIES
 
 endmenu
 
-config BR2_TIME_BITS_64
-	bool "Build Y2038-ready code"
-	depends on BR2_TOOLCHAIN_USES_GLIBC && !BR2_ARCH_IS_64
-	help
-	  This option will pass -D_TIME_BITS=64 in the compiler flags
-	  to ensure the glibc C library uses a 64-bit representation
-	  for time_t and other time types, which ensures that
-	  programs/libraries will correctly handle time past year
-	  2038.
-
-	  This option only has an effect with glibc >= 2.34, as
-	  earlier glibc versions did not have support for 64-bit
-	  time_t.
-
 comment "Security Hardening Options"
 
 config BR2_PIC_PIE_ARCH_SUPPORTS

Config.in.legacy

@@ -144,93 +144,6 @@ endif
 
 ###############################################################################
 
-comment "Legacy options removed in 2023.11"
-
-config BR2_PACKAGE_PYTHON_PYXB
-	bool "python-pyxb removed"
-	select BR2_LEGACY
-	help
-	  python-pyxb has been removed due to being abandoned and
-	  distutils no longer being supported in python 3.12.0.
-
-config BR2_PACKAGE_OPENJDK_VERSION_11
-	bool "openjdk 11 has been removed"
-	select BR2_LEGACY
-	help
-	  Version 11 of OpenJDK is no longer supported, version 17
-	  should now be used as the new LTS release.
-
-config BR2_KERNEL_HEADERS_6_4
-	bool "kernel headers version 6.4.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 6.4.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_PACKAGE_GOOGLE_MATERIAL_DESIGN_ICONS
-	bool "google-material-design-icons removed"
-	select BR2_LEGACY
-	help
-	  The google-material-design-icons package has been removed.
-
-config BR2_GDB_VERSION_10
-	bool "gdb 10.x removed"
-	select BR2_LEGACY
-	help
-	  gdb 10.x has been removed, use a newer version.
-
-comment "Legacy options removed in 2023.08"
-
-config BR2_TARGET_LPC32XXCDL
-	bool "lpc32xxcdl has been removed"
-	select BR2_LEGACY
-	help
-	  lpc32xxcdl has been removed, due to licensing concerns.
-
-config BR2_BINUTILS_VERSION_2_38_X
-	bool "binutils 2.38.x has been removed"
-	select BR2_LEGACY
-	help
-	  binutils 2.38 has been removed, use a newer version.
-
-config BR2_GCC_VERSION_10_X
-	bool "gcc 10.x support removed"
-	select BR2_LEGACY
-	help
-	  Support for gcc version 10.x has been removed. The current
-	  default version (12.x or later) has been selected instead.
-
-config BR2_KERNEL_HEADERS_6_3
-	bool "kernel headers version 6.3.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 6.3.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_PACKAGE_TOVID
-	bool "tovid removed"
-	select BR2_LEGACY
-	help
-	  tovid was removed
-
-config BR2_PACKAGE_LIBASPLIB
-	bool "libasplib removed"
-	select BR2_LEGACY
-	help
-	  libasplib is no longer needed.
-
-config BR2_PACKAGE_OCF_LINUX
-	bool "ocf-linux has been removed"
-	select BR2_LEGACY
-	help
-	  ocf-linux is incompatible with newer kernels.
-
-config BR2_BINUTILS_VERSION_2_37_X
-	bool "binutils 2.37.x has been removed"
-	select BR2_LEGACY
-	help
-	  binutils 2.37 has been removed, use a newer version.
-
 comment "Legacy options removed in 2023.05"
 
 config BR2_KERNEL_HEADERS_6_2

DEVELOPERS

@@ -26,22 +26,6 @@
 #   infrastructure, and will be CC'ed on all patches that add or
 #   modify packages that use this infrastructure.
 
-N:	Adam Duskett <aduskett@gmail.com>
-F:	package/firewalld/
-F:	package/vulkan-loader/
-F:	package/vulkan-tools/
-
-N:	Adam Duskett <adam.duskett@amarulasolutions.com>
-F:	package/depot-tools/
-F:	package/flutter-engine/
-F:	package/flutter-gallery/
-F:	package/flutter-pi/
-F:	package/flutter-sdk-bin/
-F:	package/python-kmod/
-F:	package/python-versioneer/
-F:	support/testing/tests/package/test_firewalld.py
-F:	support/testing/tests/package/test_flutter.py
-
 N:	Adam Heinrich <adam@adamh.cz>
 F:	package/jack1/
 
@@ -74,11 +58,7 @@ F:	package/libmbim/
 F:	package/libqmi/
 F:	package/modem-manager/
 
-N:      Alessandro Partesotti <a.partesotti@gmail.com>
-F:      package/oatpp/
-
 N:	Alex Michel <alex.michel@wiedemann-group.com>
-F:	package/libzenoh-pico/
 F:	package/network-manager-openvpn/
 
 N:	Alex Suykov <alex.suykov@gmail.com>
@@ -141,7 +121,6 @@ N:	Alistair Francis <alistair@alistair23.me>
 F:	board/sifive/
 F:	boot/opensbi/
 F:	configs/hifive_unleashed_defconfig
-F:	package/libspdm/
 F:	package/xen/
 
 N:	Alvaro G. M <alvaro.gamez@hazent.com>
@@ -150,13 +129,7 @@ F:	package/libxmlrpc/
 F:	package/python-docopt/
 
 N:	Anand Gadiyar <gadiyar@ti.com>
-F:	board/ti/am62x-sk/
-F:	board/ti/am64x-sk/
-F:	boot/ti-k3-boot-firmware/
-F:	boot/ti-k3-image-gen/
 F:	boot/ti-k3-r5-loader/
-F:	configs/ti_am62x_sk_defconfig
-F:	configs/ti_am64x_sk_defconfig
 
 N:	André Zwing <nerv@dawncrow.de>
 F:	package/libkrb5/
@@ -190,7 +163,6 @@ F:	package/apparmor/
 F:	package/corkscrew/
 F:	package/cups/
 F:	package/cups-filters/
-F:	package/cutekeyboard/
 F:	package/fail2ban/
 F:	package/grep/
 F:	package/htpdate/
@@ -349,19 +321,19 @@ F:	package/apr-util/
 F:	package/bcg729/
 F:	package/bento4/
 F:	package/bitcoin/
+F:	package/bluez-tools/
+F:	package/boinc/
 F:	package/clamav/
 F:	package/dav1d/
 F:	package/dht/
 F:	package/dovecot/
 F:	package/dovecot-pigeonhole/
 F:	package/dtv-scan-tables/
-F:	package/ethtool/
 F:	package/eudev/
 F:	package/exim/
 F:	package/fetchmail/
 F:	package/ffmpeg/
 F:	package/flac/
-F:	package/flatbuffers/
 F:	package/freeswitch/
 F:	package/freeswitch-mod-bcg729/
 F:	package/freetype/
@@ -369,10 +341,13 @@ F:	package/fstrcmp/
 F:	package/ghostscript/
 F:	package/giflib/
 F:	package/gkrellm/
+F:	package/gli/
+F:	package/glmark2/
 F:	package/gpsd/
 F:	package/gptfdisk/
-F:	package/hddtemp/
 F:	package/hdparm/
+F:	package/hddtemp/
+F:	package/inih/
 F:	package/intel-gmmlib/
 F:	package/intel-mediadriver/
 F:	package/intel-mediasdk/
@@ -380,22 +355,18 @@ F:	package/intel-microcode/
 F:	package/jsoncpp/
 F:	package/kodi*
 F:	package/lame/
-F:	package/lcms2/
 F:	package/leafnode2/
 F:	package/libaacs/
+F:	package/libasplib/
 F:	package/libass/
 F:	package/libbdplus/
 F:	package/libbluray/
 F:	package/libbroadvoice/
-F:	package/libcap/
 F:	package/libcdio/
 F:	package/libcec/
 F:	package/libcodec2/
 F:	package/libcrossguid/
-F:	package/libde265/
-F:	package/libdecor/
 F:	package/libdeflate/
-F:	package/libdisplay-info/
 F:	package/libdrm/
 F:	package/libdvbcsa/
 F:	package/libdvdcss/
@@ -403,13 +374,11 @@ F:	package/libdvdnav/
 F:	package/libdvdread/
 F:	package/libebur128/
 F:	package/libfreeglut/
-F:	package/libfribidi/
 F:	package/libg7221/
 F:	package/libglew/
 F:	package/libglfw/
 F:	package/libglu/
 F:	package/libhdhomerun/
-F:	package/libheif/
 F:	package/libilbc/
 F:	package/libks/
 F:	package/libldns/
@@ -427,29 +396,21 @@ F:	package/libsidplay2/
 F:	package/libsilk/
 F:	package/libsndfile/
 F:	package/libsoundtouch/
+F:	package/libsquish/
 F:	package/libudfread/
 F:	package/libunibreak/
 F:	package/liburiparser/
 F:	package/libutp/
-F:	package/libuv/
 F:	package/libva/
 F:	package/libva-intel-driver/
 F:	package/libva-utils/
 F:	package/libvorbis/
 F:	package/libvpx/
 F:	package/libyuv/
-F:	package/linux-firmware/
-F:	package/mc/
 F:	package/mesa3d/
 F:	package/minidlna/
 F:	package/mjpg-streamer/
-F:	package/mpg123/
-F:	package/ntp/
 F:	package/nut/
-F:	package/onevpl/
-F:	package/onevpl-intel-gpu/
-F:	package/opus/
-F:	package/pciutils/
 F:	package/perl-crypt-openssl-guess/
 F:	package/perl-crypt-openssl-random/
 F:	package/perl-crypt-openssl-rsa/
@@ -468,34 +429,33 @@ F:	package/perl-io-html/
 F:	package/perl-lwp-mediatypes/
 F:	package/perl-mail-dkim/
 F:	package/perl-mailtools/
-F:	package/perl-netaddr-ip/
 F:	package/perl-net-dns/
 F:	package/perl-net-http/
+F:	package/perl-netaddr-ip/
 F:	package/perl-timedate/
 F:	package/perl-uri/
 F:	package/perl-www-robotrules/
 F:	package/php/
+F:	package/pixman/
 F:	package/pngquant/
-F:	package/pppd/
-F:	package/privoxy/
+F:	package/pound/
 F:	package/pure-ftpd/
 F:	package/python-couchdb/
 F:	package/python-cssutils/
 F:	package/python-glslang/
-F:	package/python-mako/
 F:	package/python-mwclient/
 F:	package/python-mwscrape/
 F:	package/python-mwscrape2slob/
+F:	package/python-mako/
 F:	package/python-oauthlib/
 F:	package/python-pyicu/
 F:	package/python-pylru/
 F:	package/python-requests-oauthlib/
 F:	package/python-slob/
-F:	package/rrdtool/
 F:	package/rsync/
 F:	package/rtmpdump/
 F:	package/samba4/
-F:	package/sofia-sip/
+F:	package/softether/
 F:	package/spandsp/
 F:	package/sqlite/
 F:	package/stellarium/
@@ -505,10 +465,12 @@ F:	package/tor/
 F:	package/transmission/
 F:	package/tvheadend/
 F:	package/unixodbc/
+F:	package/utf8proc/
+F:	package/vdr/
+F:	package/vdr-plugin-vnsiserver/
 F:	package/vlc/
-F:	package/wget/
-F:	package/wireless-regdb/
-F:	package/wireless_tools/
+F:	package/vnstat/
+F:	package/waylandpp/
 F:	package/x264/
 F:	package/x265/
 F:	package/xmrig/
@@ -529,11 +491,6 @@ F:	package/iftop/
 F:	package/ncdu/
 
 N:	Brandon Maier <brandon.maier@collins.com>
-F:	board/freescale/ls1046a-frwy/
-F:	configs/ls1046a-frwy_defconfig
-F:	package/python-pysensors/
-F:	package/qoriq-fm-ucode/
-F:	package/unifdef/
 F:	package/vmtouch/
 
 N:	Brock Williams <brock@cottonwoodcomputer.com>
@@ -585,7 +542,6 @@ F:	package/balena-engine/
 F:	package/batman-adv/
 F:	package/catatonit/
 F:	package/cni-plugins/
-F:	package/conmon/
 F:	package/containerd/
 F:	package/crun/
 F:	package/delve/
@@ -595,8 +551,6 @@ F:	package/docker-engine/
 F:	package/embiggen-disk/
 F:	package/fuse-overlayfs/
 F:	package/go/
-F:	package/go-bootstrap-stage1/
-F:	package/go-bootstrap-stage2/
 F:	package/gocryptfs/
 F:	package/mbpfan/
 F:	package/moby-buildkit/
@@ -672,10 +626,6 @@ N:	Clément Péron <peron.clem@gmail.com>
 F:	board/beelink/gs1/
 F:	configs/beelink_gs1_defconfig
 
-N:	Colin Foster <colin.foster@in-advantage.com>
-F:	package/python-tftpy/
-F:	package/rauc-hawkbit-updater/
-
 N:	Corentin Guillevic <corentin.guillevic@smile.fr>
 F:	package/libloki/
 
@@ -692,7 +642,7 @@ F:	package/odroidc2-firmware/
 N:	Daniel J. Leach <dleach@belcan.com>
 F:	package/dacapo/
 
-N:	Daniel Lang <dalang@gmx.at>
+N:	Daniel Lang <d.lang@abatec.at>
 F:	package/atkmm/
 F:	package/atkmm2_28/
 F:	package/cairomm/
@@ -703,11 +653,9 @@ F:	package/glibmm2_66/
 F:	package/gtkmm3/
 F:	package/libsigc/
 F:	package/libsigc2/
-F:	package/llvm-project/
 F:	package/paho-mqtt-cpp/
 F:	package/pangomm/
 F:	package/pangomm2_46/
-F:	package/sam-ba/
 
 N:	Damien Lanson <damien@kal-host.com>
 F:	package/libvdpau/
@@ -861,7 +809,7 @@ F:	package/bayer2rgb-neon/
 F:	package/gstreamer1/gst1-plugins-bayer2rgb-neon/
 
 N:	Eric Le Bihan <eric.le.bihan.dev@free.fr>
-F:	docs/manual/adding-packages-meson.adoc
+F:	docs/manual/adding-packages-meson.txt
 F:	package/adwaita-icon-theme/
 F:	package/darkhttpd/
 F:	package/eudev/
@@ -1065,7 +1013,6 @@ F:	package/tinycbor/
 F:	package/tinydtls/
 F:	package/tinymembench/
 F:	package/whois/
-F:	package/x11r7/xlib_libXpresent/
 F:	package/zeek/
 
 N:	Fabrice Goucem <fabrice.goucem@oss.nxp.com>
@@ -1075,10 +1022,6 @@ F:	configs/freescale_imx6ullevk_defconfig
 N:	Falco Hyfing <hyfinglists@gmail.com>
 F:	package/python-pymodbus/
 
-N:	Flávio Tapajós <flavio.tapajos@newtesc.com.br>
-F:	configs/asus_tinker-s_rk3288_defconfig
-F:	board/asus/tinker-s/
-
 N:	Florian Fainelli <f.fainelli@gmail.com>
 F:	package/cpulimit/
 
@@ -1096,9 +1039,7 @@ N:	Francisco Gonzalez <gzmorell@gmail.com>
 F:	package/ser2net/
 
 N:	Francois Dugast <francois.dugast.foss@gmail.com>
-F:	board/sipeed/licheepi_nano/
 F:	board/visionfive2/
-F:	configs/sipeed_licheepi_nano_defconfig
 F:	configs/visionfive2_defconfig
 
 N:	Francois Perrad <francois.perrad@gadz.org>
@@ -1210,36 +1151,26 @@ F:	package/xapian/
 N:	Giulio Benetti <giulio.benetti@benettiengineering.com>
 F:	board/bananapi/bananapi-m2-ultra/
 F:	board/freescale/imx6ullevk/
-F:	board/freescale/imxrt1050evk/
 F:	board/olimex/a*
-F:	board/pine64/rockpro64
 F:	configs/amarula_vyasa_rk3288_defconfig
 F:	configs/asus_tinker_rk3288_defconfig
-F:	configs/bananapi_m2_berry_defconfig
 F:	configs/bananapi_m2_ultra_defconfig
 F:	configs/freescale_imx6ullevk_defconfig
 F:	configs/imx6ullevk_defconfig
-F:	configs/imxrt1050-evk_defconfig
 F:	configs/olimex_a*
-F:	configs/rockpro64_defconfig
 F:	package/at/
 F:	package/binutils/
 F:	package/cryptsetup/
 F:	package/erlang-jiffy/
-F:	package/esp-hosted/
 F:	package/gcc/
 F:	package/harfbuzz/
-F:	package/libblockdev/
 F:	package/libfuse3/
 F:	package/libnspr/
 F:	package/libnss/
-F:	package/libnvme/
 F:	package/mali-driver/
 F:	package/minicom/
-F:	package/mongoose/
 F:	package/mmc-utils/
 F:	package/nfs-utils/
-F:	package/python-libconf/
 F:	package/python-uvloop/
 F:	package/qt5/
 F:	package/rockchip-mali/
@@ -1254,8 +1185,6 @@ F:	package/rtl8821cu/
 F:	package/sunxi-mali-utgard/
 F:	package/sunxi-mali-utgard-driver/
 F:	package/sunxi-tools/
-F:	package/swugenerator/
-F:	package/swupdate/
 F:	package/trace-cmd/
 F:	package/udisks/
 F:	package/wilc-driver/
@@ -1431,12 +1360,78 @@ F:	package/fxdiv/
 F:	package/gensio/
 F:	package/lua-std-debug/
 F:	package/lua-std-normalize/
-F:	package/libucontext/
 F:	package/lilv/
 F:	package/lv2/
 F:	package/neon-2-sse/
 F:	package/pipewire/
-F:	package/python*
+F:	package/python-aioconsole/
+F:	package/python-aiodns/
+F:	package/python-aiohttp/
+F:	package/python-aiohttp-cors/
+F:	package/python-aiohttp-debugtoolbar/
+F:	package/python-aiohttp-jinja2/
+F:	package/python-aiohttp-mako/
+F:	package/python-aiohttp-remotes/
+F:	package/python-aiohttp-security/
+F:	package/python-aiohttp-session/
+F:	package/python-aiohttp-sse/
+F:	package/python-aiologstash/
+F:	package/python-aiomonitor/
+F:	package/python-aiojobs/
+F:	package/python-aioprocessing/
+F:	package/python-aiorwlock/
+F:	package/python-aiosignal/
+F:	package/python-aiozipkin/
+F:	package/python-argon2-cffi/
+F:	package/python-argon2-cffi-bindings/
+F:	package/python-async-generator/
+F:	package/python-async-lru/
+F:	package/python-async-timeout/
+F:	package/python-bidict/
+F:	package/python-brotli/
+F:	package/python-cbor2/
+F:	package/python-cchardet/
+F:	package/python-charset-normalizer/
+F:	package/python-cssselect2/
+F:	package/python-editables/
+F:	package/python-flatbuffers/
+F:	package/python-fonttools/
+F:	package/python-frozenlist/
+F:	package/python-greenlet/
+F:	package/python-h11/
+F:	package/python-hatchling/
+F:	package/python-hatch-fancy-pypi-readme/
+F:	package/python-hatch-vcs/
+F:	package/python-installer/
+F:	package/python-janus/
+F:	package/python-logstash/
+F:	package/python-maturin/
+F:	package/python-multidict/
+F:	package/python-mypy-extensions/
+F:	package/python-outcome/
+F:	package/python-pathspec/
+F:	package/python-pycares/
+F:	package/python-pydyf/
+F:	package/python-pypa-build/
+F:	package/python-pyphen/
+F:	package/python-pyproject-hooks/
+F:	package/python-rtoml/
+F:	package/python-selenium/
+F:	package/python-snappy/
+F:	package/python-sniffio/
+F:	package/python-sockjs/
+F:	package/python-terminaltables/
+F:	package/python-tinycss2/
+F:	package/python-tomli/
+F:	package/python-trio/
+F:	package/python-trio-websocket/
+F:	package/python-typeguard/
+F:	package/python-typing-inspect/
+F:	package/python-uhid/
+F:	package/python-weasyprint/
+F:	package/python-wsproto/
+F:	package/python-yarl/
+F:	package/python-zopfli/
 F:	package/rtl8192eu/
 F:	package/serd/
 F:	package/sord/
@@ -1449,23 +1444,14 @@ F:	support/testing/tests/package/test_python_rtoml.py
 N:	James Knight <james.knight@collins.com>
 F:	package/atkmm/
 F:	package/cairomm/
+F:	package/google-material-design-icons/
 F:	package/glibmm/
 F:	package/gtkmm3/
 F:	package/libpqxx/
 F:	package/pangomm/
 F:	package/rpm/
-F:	package/swaybg/
 F:	package/yad/
 
-N:	Jamie Gibbons <jamie.gibbons@microchip.com>
-F:	board/microchip/mpfs_icicle/
-F:	configs/microchip_mpfs_icicle_defconfig
-F:	package/microchip-hss-payload-generator/
-
-N:	Jan Havran <havran.jan@email.cz>
-F:	board/pine64/pinecube/
-F:	configs/pine64_pinecube_defconfig
-
 N:	Jan Heylen <jan.heylen@nokia.com>
 F:	package/opentracing-cpp/
 
@@ -1492,10 +1478,6 @@ F:	package/quota/
 N:	Jason Pruitt <jrspruitt@gmail.com>
 F:	package/librtlsdr/
 
-N:	Javad Rahimi <javad321javad@gmail.com>
-F:	board/orangepi/orangepi-pc2
-F:	configs/orangepi_pc2_defconfig
-
 N:	Jean Burgat <jeanburgat33@gmail.com>
 F:	package/openfpgaloader/
 
@@ -1524,10 +1506,6 @@ F:	package/strongswan/
 F:	package/wmctrl/
 F:	package/x11r7/xdriver_xf86-video-imx/
 
-N:	Jesse Taube <Mr.Bossman075@gmail.com>
-F:	board/freescale/imxrt1050evk/
-F:	configs/imxrt1050-evk_defconfig
-
 N:	Jesse Van Gavere <jesseevg@gmail.com>
 F:	package/qt6/
 
@@ -1546,7 +1524,6 @@ F:	package/libnet/
 F:	package/libteam/
 F:	package/libuev/
 F:	package/mg/
-F:	package/mdnsd/
 F:	package/mini-snmpd/
 F:	package/mrouted/
 F:	package/netcalc/
@@ -1616,9 +1593,6 @@ N:	John Faith <jfaith@impinj.com>
 F:	package/python-inflection/
 F:	package/sdbusplus/
 
-N:	Jon Ringle <jringle@gridpoint.com>
-F:	package/mbpoll/
-
 N:	Jonathan Ben Avraham <yba@tkos.co.il>
 F:	arch/Config.in.xtensa
 F:	package/autofs/
@@ -1646,12 +1620,12 @@ F:	support/testing/tests/package/test_zfs.py
 
 N:	Joseph Kogut <joseph.kogut@gmail.com>
 F:	package/at-spi2-core/
+F:	package/clang/
 F:	package/earlyoom/
 F:	package/gconf/
 F:	package/libnss/
-F:	package/llvm-project/clang/
-F:	package/llvm-project/lld/
-F:	package/llvm-project/llvm/
+F:	package/lld/
+F:	package/llvm/
 F:	package/python-cython/
 F:	package/python-pycups/
 F:	package/python-raven/
@@ -1725,7 +1699,6 @@ F:	package/libjxl/
 F:	package/octave/
 F:	package/ola/
 F:	package/openblas/
-F:	package/opencsd/
 F:	package/openmpi/
 F:	package/perftest/
 F:	package/ptm2human/
@@ -1736,7 +1709,6 @@ F:	package/python-hwdata/
 F:	package/python-magic-wormhole/
 F:	package/python-magic-wormhole-mailbox-server/
 F:	package/python-magic-wormhole-transit-relay/
-F:	package/python-midiutil/
 F:	package/python-pyalsa/
 F:	package/python-spake2/
 F:	package/rdma-core/
@@ -1747,72 +1719,37 @@ F:	package/zynaddsubfx/
 F:	support/testing/tests/package/sample_python_distro.py
 F:	support/testing/tests/package/sample_python_gnupg.py
 F:	support/testing/tests/package/sample_python_hwdata.py
-F:	support/testing/tests/package/sample_python_midiutil.py
 F:	support/testing/tests/package/sample_python_pyalsa.py
 F:	support/testing/tests/package/sample_python_spake2.py
-F:	support/testing/tests/package/test_acpica.py
-F:	support/testing/tests/package/test_acpica/
-F:	support/testing/tests/package/test_brotli.py
-F:	support/testing/tests/package/test_bzip2.py
-F:	support/testing/tests/package/test_compressor_base.py
 F:	support/testing/tests/package/test_ddrescue.py
 F:	support/testing/tests/package/test_ddrescue/
-F:	support/testing/tests/package/test_dos2unix.py
-F:	support/testing/tests/package/test_fluidsynth.py
-F:	support/testing/tests/package/test_fluidsynth/
-F:	support/testing/tests/package/test_gawk.py
-F:	support/testing/tests/package/test_glslsandbox_player.py
-F:	support/testing/tests/package/test_glslsandbox_player/
 F:	support/testing/tests/package/test_gnupg2.py
-F:	support/testing/tests/package/test_gnuradio.py
-F:	support/testing/tests/package/test_gnuradio/
-F:	support/testing/tests/package/test_gzip.py
 F:	support/testing/tests/package/test_highway.py
 F:	support/testing/tests/package/test_hwloc.py
 F:	support/testing/tests/package/test_iperf3.py
 F:	support/testing/tests/package/test_kexec.py
 F:	support/testing/tests/package/test_kexec/
-F:	support/testing/tests/package/test_kmscube.py
-F:	support/testing/tests/package/test_kmscube/
-F:	support/testing/tests/package/test_less.py
-F:	support/testing/tests/package/test_libgpgme.py
 F:	support/testing/tests/package/test_libjxl.py
-F:	support/testing/tests/package/test_lrzip.py
-F:	support/testing/tests/package/test_lzip.py
 F:	support/testing/tests/package/test_lsof.py
-F:	support/testing/tests/package/test_lz4.py
-F:	support/testing/tests/package/test_lzop.py
 F:	support/testing/tests/package/test_mtools.py
 F:	support/testing/tests/package/test_ncdu.py
-F:	support/testing/tests/package/test_nftables.py
-F:	support/testing/tests/package/test_nftables/
 F:	support/testing/tests/package/test_octave.py
 F:	support/testing/tests/package/test_ola.py
 F:	support/testing/tests/package/test_ola/
 F:	support/testing/tests/package/test_openblas.py
 F:	support/testing/tests/package/test_perftest.py
-F:	support/testing/tests/package/test_pigz.py
 F:	support/testing/tests/package/test_python_distro.py
 F:	support/testing/tests/package/test_python_gnupg.py
 F:	support/testing/tests/package/test_python_hkdf.py
 F:	support/testing/tests/package/test_python_hwdata.py
 F:	support/testing/tests/package/test_python_magic_wormhole.py
-F:	support/testing/tests/package/test_python_midiutil.py
 F:	support/testing/tests/package/test_python_pyalsa.py
 F:	support/testing/tests/package/test_python_spake2.py
 F:	support/testing/tests/package/test_rdma_core.py
 F:	support/testing/tests/package/test_rdma_core/
-F:	support/testing/tests/package/test_screen.py
 F:	support/testing/tests/package/test_stress_ng.py
-F:	support/testing/tests/package/test_tcl.py
-F:	support/testing/tests/package/test_tcl/
-F:	support/testing/tests/package/test_weston.py
-F:	support/testing/tests/package/test_weston/
-F:	support/testing/tests/package/test_xz.py
 F:	support/testing/tests/package/test_z3.py
 F:	support/testing/tests/package/test_z3/
-F:	support/testing/tests/package/test_zchunk.py
-F:	support/testing/tests/package/test_zstd.py
 
 N:	Julien Viard de Galbert <julien@vdg.name>
 F:	package/dieharder/
@@ -1839,11 +1776,6 @@ F:	package/ramsmp/
 N:	Kieran Bingham <kieran.bingham@ideasonboard.com>
 F:	package/libcamera/
 
-N:	Kilian Zinnecker <kilian.zinnecker@mail.de>
-F:	package/rockchip-rkbin/
-F:	configs/rock5b_defconfig
-F:	board/radxa/rock5b/
-
 N:	Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
 F:	package/wqy-zenhei/
 
@@ -1962,10 +1894,6 @@ F:	package/python-simplejson/
 F:	package/python-versiontools/
 F:	package/wilc-firmware/
 
-N:	Ludwig Kormann <ludwig.kormann@ict42.de>
-F:	board/in-circuit/
-F:	configs/icnova*
-
 N:	Maeva Manuel <maeva.manuel@oss.nxp.com>
 F:	board/freescale/imx8qmmek/
 F:	configs/freescale_imx8qmmek_defconfig
@@ -1985,10 +1913,8 @@ F:	package/ecryptfs-utils/
 N:	Marcin Niestroj <m.niestroj@grinn-global.com>
 F:	board/grinn/
 F:	board/orangepi/orangepi-zero-plus/
-F:	board/orangepi/orangepi-zero3/
 F:	configs/grinn_*
 F:	configs/orangepi_zero_plus_defconfig
-F:	configs/orangepi_zero3_defconfig
 F:	package/argparse/
 F:	package/dt-utils/
 F:	package/easydbus/
@@ -2022,7 +1948,6 @@ F:	support/testing/tests/package/test_python_pytest.py
 F:	support/testing/tests/package/test_python_pytest_asyncio.py
 
 N:	Marcus Folkesson <marcus.folkesson@gmail.com>
-F:	package/criu/
 F:	package/libcamera/
 F:	package/libcamera-apps/
 F:	package/libostree/
@@ -2112,9 +2037,6 @@ F:	package/python-txaio/
 F:	package/python-ujson/
 F:	package/python-wsaccel/
 
-N:	Maksim Kiselev <bigunclemax@gmail.com>
-F:	package/ledmon/
-
 N:	Max Filippov <jcmvbkbc@gmail.com>
 F:	arch/Config.in.xtensa
 
@@ -2149,6 +2071,11 @@ F:	package/protobuf/
 F:	package/re2/
 F:	package/spdlog/
 
+N:	Michael Rommel <rommel@layer-7.net>
+F:	package/knock/
+F:	package/python-crc16/
+F:	package/python-pyzmq/
+
 N:	Michael Trimarchi <michael@amarulasolutions.com>
 F:	board/bsh/
 F:	configs/imx8mn_bsh_smm_s2_defconfig
@@ -2175,8 +2102,8 @@ F:	package/openrc/
 F:	package/skeleton-init-openrc/
 
 N:	Michel Stempin <michel.stempin@wanadoo.fr>
-F:	board/sipeed/licheepi_zero/
-F:	configs/sipeed_licheepi_zero_defconfig
+F:	board/licheepi/
+F:	configs/licheepi_zero_defconfig
 
 N:	Mike Frampton <mikeframpo@gmail.com>
 F:	package/qcom-db410c-firmware/
@@ -2208,12 +2135,12 @@ N:	Neal Frager <neal.frager@amd.com>
 F:	board/versal/
 F:	board/zynq/
 F:	board/zynqmp/
+F:	board/zynqmp/kria/
 F:	configs/versal_vck190_defconfig
-F:	configs/zynq_zc702_defconfig
 F:	configs/zynq_zc706_defconfig
-F:	configs/zynqmp_kria_kv260_defconfig
 F:	configs/zynqmp_zcu102_defconfig
 F:	configs/zynqmp_zcu106_defconfig
+F:	configs/zynqmp_kria_kv260_defconfig
 F:	package/bootgen/
 F:	package/versal-firmware/
 
@@ -2226,7 +2153,6 @@ F:	configs/galileo_defconfig
 
 N:	Nicolas Carrier <nicolas.carrier@orolia.com>
 F:	package/bmap-tools/
-F:	package/composer/
 F:	package/libdbi/
 F:	package/libdbi-drivers/
 F:	package/lua-augeas/
@@ -2368,7 +2294,6 @@ F:	configs/roseapplepi_defconfig
 F:	configs/sheevaplug_defconfig
 F:	configs/visionfive_defconfig
 F:	package/bats-core/
-F:	package/dfu-programmer/
 F:	package/docker-compose/
 F:	package/dump1090/
 F:	package/fatcat/
@@ -2403,8 +2328,6 @@ F:	support/testing/tests/package/test_docker_compose.py
 
 N:	Peter Seiderer <ps.report@gmx.net>
 F:	package/dotconf/
-F:	package/fft-eval/
-F:	package/python-blinker/
 F:	package/qt5/qt5speech/
 F:	package/speechd/
 
@@ -2481,14 +2404,11 @@ F:	package/tree/
 N:	Pieter De Gendt <pieter.degendt@gmail.com>
 F:	package/libvips/
 
-N:	Pieterjan Camerlynck <pieterjanca@gmail.com>
+N:	Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com>
 F:	package/libdvbpsi/
 F:	package/mraa/
 F:	package/synergy/
 
-N:	Prabhu Sannachi <prabhu.sannachi@collins.com>
-F:	package/redis-plus-plus/
-
 N:	Rafal Susz <rafal.susz@gmail.com>
 F:	board/avnet/s6lx9_microboard/
 F:	configs/s6lx9_microboard_defconfig
@@ -2529,7 +2449,6 @@ F:	support/testing/tests/package/test_python_rsa.py
 F:	support/testing/tests/package/test_python_s3transfer.py
 
 N:	Raphael Pavlidis <raphael.pavlidis@gmail.com>
-F:	package/nvidia-persistenced/
 F:	package/shadow/
 F:	package/slirp4netns/
 F:	package/sway/
@@ -2569,15 +2488,10 @@ F:	package/azmq/
 
 N:	Robert Marko <robimarko@gmail.com>
 F:	package/mdio-tools/
-F:	package/mhz/
 
 N:	Robert Rose <robertroyrose@gmail.com>
 F:	package/grpc/
 
-N:	Roberto Medina <robertoxmed@gmail.com>
-F:	board/firefly/roc-rk3399-pc/
-F:	configs/roc_pc_rk3399_defconfig
-
 N:	Rodrigo Rebello <rprebello@gmail.com>
 F:	package/chocolate-doom/
 F:	package/irssi/
@@ -2590,6 +2504,7 @@ F:	package/alure/
 F:	package/aubio/
 F:	package/binutils/
 F:	package/bullet/
+F:	package/clang/
 F:	package/clinfo/
 F:	package/efl/
 F:	package/enet/
@@ -2603,13 +2518,12 @@ F:	package/irrlicht/
 F:	package/liblinear/
 F:	package/lensfun/
 F:	package/libbpf/
+F:	package/libclc/
 F:	package/libgta/
 F:	package/libiec61850/
 F:	package/libspatialindex/
 F:	package/linux-syscall-support/
-F:	package/llvm-project/clang/
-F:	package/llvm-project/libclc/
-F:	package/llvm-project/llvm/
+F:	package/llvm/
 F:	package/lugaru/
 F:	package/mcelog/
 F:	package/mesa3d/
@@ -2631,11 +2545,8 @@ F:	package/upower/
 F:	package/waffle/
 F:	package/xenomai/
 F:	package/zziplib/
-F:	support/testing/tests/package/sample_python_mako.py
-F:	support/testing/tests/package/sample_python_mako_ext.py
 F:	support/testing/tests/package/test_glxinfo.py
 F:	support/testing/tests/package/test_openssh.py
-F:	support/testing/tests/package/test_python_mako.py
 F:	toolchain/
 
 N:	Rufus Segar <rhs@riseup.net>
@@ -2644,10 +2555,6 @@ F:	package/agent-proxy/
 N:	Ryan Wilkins <ryan@deadfrog.net>
 F:	package/biosdevname/
 
-N:	Saeed Kazemi <kazemi.ms@gmail.com>
-F:	package/eza/
-F:	package/procs/
-
 N:	Sam Lancia <sam@gpsm.co.uk>
 F:	package/lrzip/
 
@@ -2668,14 +2575,6 @@ F:	support/misc/toolchainfile.cmake.in
 N:	Sam Voss <sam.voss@gmail.com>
 F:	package/ripgrep/
 
-N:	Sebastian Weyer <sebastian.weyer@smile.fr>
-F:      package/amlogic-boot-fip/
-F:	package/nushell/
-F:	package/rust-bindgen/
-F:	package/spirv-headers/
-F:	support/testing/tests/package/sample_nu.nu
-F:	support/testing/tests/package/test_nu.py
-
 N:	Sébastien Szymanski <sebastien.szymanski@armadeus.com>
 F:	package/mmc-utils/
 F:	package/python-flask-jsonrpc/
@@ -2713,10 +2612,6 @@ F:	package/rtl8189fs/
 F:	package/wpa_supplicant/
 F:	package/xr819-xradio/
 
-N:	Sergey Matyukevich <sergey.matyukevich@synopsys.com>
-F:	board/synopsys/nsim/
-F:	configs/snps_arc700_nsim_defconfig
-
 N:	Sergio Prado <sergio.prado@e-labworks.com>
 F:	board/toradex/apalis-imx6/
 F:	configs/toradex_apalis_imx6_defconfig
@@ -2782,10 +2677,6 @@ F:	package/libvpx/
 F:	package/mesa3d-demos/
 F:	package/ti-gfx/
 
-N:	Stefan Nickl <Stefan.Nickl@gmail.com>
-F:	board/freescale/imx8dxlevk/
-F:	configs/freescale_imx8dxlevk_defconfig
-
 N:	Stefan Ott <stefan@ott.net>
 F:	package/unbound/
 
@@ -2819,6 +2710,7 @@ F:	package/dvdauthor/
 F:	package/dvdrw-tools/
 F:	package/memtest86/
 F:	package/mjpegtools/
+F:	package/tovid/
 F:	package/udftools/
 F:	package/xorriso/
 
@@ -2845,10 +2737,6 @@ F:	package/reproc/
 F:	package/termcolor/
 F:	package/tl-expected/
 
-N:	Takumi Takahashi <takumiiinn@gmail.com>
-F:	package/gsettings-desktop-schemas/
-F:	package/libcanberra/
-
 N:	Tan En De <ende.tan@starfivetech.com>
 F:	package/libkcapi/
 
@@ -2914,7 +2802,6 @@ F:	toolchain/
 
 N:	Thomas Devoogdt <thomas@devoogdt.com>
 F:	package/fluent-bit/
-F:	package/libsoup3/
 
 N:	Thomas Huth <huth@tuxfamily.org>
 F:	board/qemu/m68k-mcf5208/
@@ -2972,7 +2859,6 @@ F:	package/msmtp/
 F:	package/musl/
 F:	package/musl-fts/
 F:	package/ne10/
-F:	package/nodejs/
 F:	package/pkg-python.mk
 F:	package/pkg-autotools.mk
 F:	package/pkg-generic.mk
@@ -3045,17 +2931,14 @@ F:	package/gettext-tiny/
 F:	package/tinyssh/
 
 N:	Valentin Korenblit <valentinkorenblit@gmail.com>
+F:	package/clang/
 F:	package/clinfo/
-F:	package/llvm-project/clang/
-F:	package/llvm-project/libclc/
-F:	package/llvm-project/llvm/
+F:	package/libclc/
+F:	package/llvm/
 
 N:	Vanya Sergeev <vsergeev@gmail.com>
 F:	package/lua-periphery/
 
-N:	Viacheslav Bocharov <adeep@lexina.in>
-F:	package/rtl8822cs/
-
 N:	Victor Huesca <victor.huesca@bootlin.com>
 F:	support/testing/tests/core/test_root_password.py
 
@@ -3101,7 +2984,6 @@ F:	package/mksh/
 F:	package/ruby/
 F:	package/uclibc/
 F:	package/uclibc-ng-test/
-F:	support/testing/tests/package/test_ruby.py
 
 N:	Will Newton <will.newton@gmail.com>
 F:	package/enchant/
@@ -3113,11 +2995,6 @@ F:	package/time/
 N:	Will Wagner <will_wagner@carallon.com>
 F:	package/yaffs2utils/
 
-N:	Witold Lipieta <witold.lipieta@thaumatec.com>
-F:	package/python-segno/
-F:	support/testing/tests/package/sample_python_segno.py
-F:	support/testing/tests/package/test_python_segno.py
-
 N:	Wojciech M. Zabolotny <wzab01@gmail.com>
 F:	package/avrdude/
 F:	package/jack2/
@@ -3127,18 +3004,8 @@ F:	package/python-pyusb/
 N:	Wojciech Niziński <niziak@spox.org>
 F:	package/fwup/
 
-N:	Woodrow Douglass <wdouglass@carnegierobotics.com>
-F:	package/opencv4
-F:	package/opencv4-contrib
-
 N:	Xuanhao Shi <X15000177@gmail.com>
-F:	board/ti/am62x-sk/
-F:	board/ti/am64x-sk/
-F:	boot/ti-k3-boot-firmware/
-F:	boot/ti-k3-image-gen/
 F:	boot/ti-k3-r5-loader/
-F:	configs/ti_am62x_sk_defconfig
-F:	configs/ti_am64x_sk_defconfig
 
 N:	Yair Ben Avraham <yairba@protonmail.com>
 F:	package/casync/
@@ -3195,7 +3062,6 @@ F:	package/zisofs-tools/
 F:	support/download/
 
 N:	Yann E. MORIN <yann.morin@orange.com>
-F:	.editorconfig
 F:	package/gpsd/
 
 N:	Yegor Yefremov <yegorslists@googlemail.com>
@@ -3250,13 +3116,11 @@ F:	package/zlog/
 F:	support/testing/tests/package/sample_python_dicttoxml2.py
 F:	support/testing/tests/package/sample_python_dtschema.py
 F:	support/testing/tests/package/sample_python_munch.py
-F:	support/testing/tests/package/sample_python_pysmb.py
 F:	support/testing/tests/package/test_libftdi1.py
 F:	support/testing/tests/package/test_python_can.py
 F:	support/testing/tests/package/test_python_dicttoxml2.py
 F:	support/testing/tests/package/test_python_dtschema.py
 F:	support/testing/tests/package/test_python_munch.py
-F:	support/testing/tests/package/test_python_pysmb.py
 F:	utils/scanpypi
 
 N:	Yunhao Tian <t123yh.xyz@gmail.com>
@@ -3270,7 +3134,6 @@ F:	package/libusb-compat/
 F:	package/proj/
 F:	package/python-iniparse/
 F:	package/qjson/
-F:	package/qt6/qt6core5compat/
 F:	package/quazip/
 F:	package/shapelib/
 F:	package/simple-mail/

Makefile

@@ -90,9 +90,9 @@ all:
 .PHONY: all
 
 # Set and export the version string
-export BR2_VERSION := 2023.11-rc1
+export BR2_VERSION := 2023.05.1
 # Actual time the release is cut (for reproducible builds)
-BR2_VERSION_EPOCH = 1699946000
+BR2_VERSION_EPOCH = 1689606300
 
 # Save running make version since it's clobbered by the make package
 RUNNING_MAKE_VERSION := $(MAKE_VERSION)
@@ -227,6 +227,8 @@ LEGAL_MANIFEST_CSV_HOST = $(LEGAL_INFO_DIR)/host-manifest.csv
 LEGAL_WARNINGS = $(LEGAL_INFO_DIR)/.warnings
 LEGAL_REPORT = $(LEGAL_INFO_DIR)/README
 
+CPE_UPDATES_DIR = $(BASE_DIR)/cpe-updates
+
 BR2_CONFIG = $(CONFIG_DIR)/.config
 
 # Pull in the user's configuration file
@@ -351,7 +353,7 @@ export HOSTARCH := $(shell LC_ALL=C $(HOSTCC_NOCCACHE) -v 2>&1 | \
 
 # When adding a new host gcc version in Config.in,
 # update the HOSTCC_MAX_VERSION variable:
-HOSTCC_MAX_VERSION := 11
+HOSTCC_MAX_VERSION := 9
 
 HOSTCC_VERSION := $(shell V=$$($(HOSTCC_NOCCACHE) --version | \
 	sed -n -r 's/^.* ([0-9]*)\.([0-9]*)\.([0-9]*)[ ]*.*/\1 \2/p'); \
@@ -592,13 +594,8 @@ world: target-post-image
 .PHONY: prepare-sdk
 prepare-sdk: world
 	@$(call MESSAGE,"Rendering the SDK relocatable")
-	PARALLEL_JOBS=$(PARALLEL_JOBS) \
-		PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) \
-		$(TOPDIR)/support/scripts/fix-rpath host
-	PARALLEL_JOBS=$(PARALLEL_JOBS) \
-		PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) \
-		$(TOPDIR)/support/scripts/fix-rpath staging
-	$(call ppd-fixup-paths,$(BASE_DIR))
+	PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) $(TOPDIR)/support/scripts/fix-rpath host
+	PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) $(TOPDIR)/support/scripts/fix-rpath staging
 	$(INSTALL) -m 755 $(TOPDIR)/support/misc/relocate-sdk.sh $(HOST_DIR)/relocate-sdk.sh
 	mkdir -p $(HOST_DIR)/share/buildroot
 	echo $(HOST_DIR) > $(HOST_DIR)/share/buildroot/sdk-location
@@ -715,7 +712,7 @@ STAGING_DIR_FILES_LISTS = $(sort $(wildcard $(BUILD_DIR)/*/.files-list-staging.t
 .PHONY: host-finalize
 host-finalize: $(PACKAGES) $(HOST_DIR) $(HOST_DIR_SYMLINK)
 	@$(call MESSAGE,"Finalizing host directory")
-	$(call per-package-rsync,$(sort $(PACKAGES)),host,$(HOST_DIR),copy)
+	$(call per-package-rsync,$(sort $(PACKAGES)),host,$(HOST_DIR))
 
 .PHONY: staging-finalize
 staging-finalize: $(STAGING_DIR_SYMLINK)
@@ -723,7 +720,7 @@ staging-finalize: $(STAGING_DIR_SYMLINK)
 .PHONY: target-finalize
 target-finalize: $(PACKAGES) $(TARGET_DIR) host-finalize
 	@$(call MESSAGE,"Finalizing target directory")
-	$(call per-package-rsync,$(sort $(PACKAGES)),target,$(TARGET_DIR),copy)
+	$(call per-package-rsync,$(sort $(PACKAGES)),target,$(TARGET_DIR))
 	$(foreach hook,$(TARGET_FINALIZE_HOOKS),$($(hook))$(sep))
 	rm -rf $(TARGET_DIR)/usr/include $(TARGET_DIR)/usr/share/aclocal \
 		$(TARGET_DIR)/usr/lib/pkgconfig $(TARGET_DIR)/usr/share/pkgconfig \
@@ -768,9 +765,7 @@ endif
 	ln -sf ../usr/lib/os-release $(TARGET_DIR)/etc
 
 	@$(call MESSAGE,"Sanitizing RPATH in target tree")
-	PARALLEL_JOBS=$(PARALLEL_JOBS) \
-		PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) \
-		$(TOPDIR)/support/scripts/fix-rpath target
+	PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) $(TOPDIR)/support/scripts/fix-rpath target
 
 # For a merged /usr, ensure that /lib, /bin and /sbin and their /usr
 # counterparts are appropriately setup as symlinks ones to the others.
@@ -836,7 +831,7 @@ legal-info-clean:
 .PHONY: legal-info-prepare
 legal-info-prepare: $(LEGAL_INFO_DIR)
 	@$(call MESSAGE,"Buildroot $(BR2_VERSION_FULL) Collecting legal info")
-	@$(call legal-license-file,HOST,buildroot,buildroot,COPYING,COPYING,support/legal-info/buildroot.hash)
+	@$(call legal-license-file,buildroot,buildroot,support/legal-info/buildroot.hash,COPYING,COPYING,HOST)
 	@$(call legal-manifest,TARGET,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,SOURCE SITE,DEPENDENCIES WITH LICENSES)
 	@$(call legal-manifest,HOST,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,SOURCE SITE,DEPENDENCIES WITH LICENSES)
 	@$(call legal-manifest,HOST,buildroot,$(BR2_VERSION_FULL),GPL-2.0+,COPYING,not saved,not saved)
@@ -932,6 +927,14 @@ pkg-stats:
 		--html $(O)/pkg-stats.html \
 		--nvd-path $(DL_DIR)/buildroot-nvd
 
+.PHONY: missing-cpe
+missing-cpe:
+	$(Q)mkdir -p $(CPE_UPDATES_DIR)
+	$(Q)cd "$(CONFIG_DIR)" ; \
+	$(TOPDIR)/support/scripts/gen-missing-cpe \
+		--nvd-path $(DL_DIR)/buildroot-nvd \
+		--output $(CPE_UPDATES_DIR)
+
 else # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
 
 # Some subdirectories are also package names. To avoid that "make linux"
@@ -1102,7 +1105,8 @@ show-vars:
 clean:
 	rm -rf $(BASE_TARGET_DIR) $(BINARIES_DIR) $(HOST_DIR) $(HOST_DIR_SYMLINK) \
 		$(BUILD_DIR) $(BASE_DIR)/staging \
-		$(LEGAL_INFO_DIR) $(GRAPHS_DIR) $(PER_PACKAGE_DIR) $(O)/pkg-stats.*
+		$(LEGAL_INFO_DIR) $(GRAPHS_DIR) $(PER_PACKAGE_DIR) $(CPE_UPDATES_DIR) \
+		$(O)/pkg-stats.*
 
 .PHONY: distclean
 distclean: clean
@@ -1187,6 +1191,7 @@ help:
 	@echo '  legal-info             - generate info about license compliance'
 	@echo '  show-info              - generate info about packages, as a JSON blurb'
 	@echo '  pkg-stats              - generate info about packages as JSON and HTML'
+	@echo '  missing-cpe            - generate XML snippets for missing CPE identifiers'
 	@echo '  printvars              - dump internal variables selected with VARS=...'
 	@echo '  show-vars              - dump all internal variables as a JSON blurb; use VARS=...'
 	@echo '                           to limit the list to variables names matching that pattern'
@@ -1258,7 +1263,4 @@ include docs/manual/manual.mk
 
 .PHONY: $(noconfig_targets)
 
-# .WAIT was introduced in make 4.4. For older make, define it as phony.
-.PHONY: .WAIT
-
 endif #umask / $(CURDIR) / $(O)

arch/Config.in

@@ -216,11 +216,6 @@ config BR2_sh
 config BR2_sparc
 	bool "SPARC"
 	select BR2_USE_MMU
-	# uClibc-ng broken on sparc due to recent gcc changes
-	# that need to be reverted since gcc 8.4, 9.3 and 10.1.
-	# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98784
-	# gcc <= 10.x has been removed from Buildroot.
-	select BR2_ARCH_HAS_NO_TOOLCHAIN_BUILDROOT
 	help
 	  SPARC (from Scalable Processor Architecture) is a RISC
 	  instruction set architecture (ISA) developed by Sun
@@ -309,10 +304,6 @@ config BR2_ARCH_NEEDS_GCC_AT_LEAST_12
 	bool
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_11
 
-config BR2_ARCH_NEEDS_GCC_AT_LEAST_13
-	bool
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_12
-
 # The following string values are defined by the individual
 # Config.in.$ARCH files
 config BR2_ARCH

arch/Config.in.mips

@@ -40,8 +40,8 @@ choice
 	help
 	  Specific CPU variant to use
 
-	  64bit capable: mips4, 64, 64r2, 64r3, 64r5, 64r6
-	  non-64bit capable: mips4, 32, 32r2, 32r3, 32r5, 32r6
+	  64bit capable: 64, 64r2, 64r3, 64r5, 64r6
+	  non-64bit capable: 32, 32r2, 32r3, 32r5, 32r6
 
 config BR2_mips_32
 	bool "Generic MIPS32"
@@ -97,8 +97,6 @@ config BR2_mips_xburst
 	  to be used in order to prevent emitting these instructions.
 
 	  See http://www.ingenic.com/en/?xburst.html
-config BR2_mips4
-	bool "MIPS IV"
 config BR2_mips_64
 	bool "Generic MIPS64"
 	depends on BR2_ARCH_IS_64
@@ -264,7 +262,6 @@ config BR2_GCC_TARGET_ARCH
 	default "octeon2"	if BR2_mips_octeon2
 	default "octeon3"	if BR2_mips_octeon3
 	default "p6600"		if BR2_mips_p6600
-	default "mips4"		if BR2_mips4
 
 config BR2_MIPS_OABI32
 	bool

arch/Config.in.powerpc

@@ -146,6 +146,21 @@ config BR2_powerpc_power9
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_6
 endchoice
 
+choice
+	prompt "Target ABI"
+	default BR2_powerpc_SPE if BR2_POWERPC_CPU_HAS_SPE
+	default BR2_powerpc_CLASSIC
+	help
+	  Application Binary Interface to use
+
+config BR2_powerpc_CLASSIC
+	bool "Classic"
+	depends on !BR2_POWERPC_CPU_HAS_SPE
+config BR2_powerpc_SPE
+	bool "SPE"
+	depends on BR2_POWERPC_CPU_HAS_SPE
+endchoice
+
 config BR2_POWERPC_SOFT_FLOAT
 	bool "Use soft-float"
 	select BR2_SOFT_FLOAT

arch/Config.in.riscv

@@ -1,5 +1,23 @@
 # RISC-V CPU ISA extensions.
 
+config BR2_RISCV_ISA_RVI
+	bool
+
+config BR2_RISCV_ISA_RVM
+	bool
+
+config BR2_RISCV_ISA_RVA
+	bool
+
+config BR2_RISCV_ISA_RVF
+	bool
+
+config BR2_RISCV_ISA_RVD
+	bool
+
+config BR2_RISCV_ISA_RVC
+	bool
+
 choice
 	prompt "Target Architecture Variant"
 	default BR2_riscv_g
@@ -17,33 +35,35 @@ config BR2_riscv_g
 config BR2_riscv_custom
 	bool "Custom architecture"
 	select BR2_RISCV_ISA_RVI
+	select BR2_RISCV_ISA_CUSTOM_RVA
 
 endchoice
 
+if BR2_riscv_custom
+
 comment "Instruction Set Extensions"
 
-config BR2_RISCV_ISA_RVI
-	bool "Base Integer (I)"
-
-config BR2_RISCV_ISA_RVM
+config BR2_RISCV_ISA_CUSTOM_RVM
 	bool "Integer Multiplication and Division (M)"
+	select BR2_RISCV_ISA_RVM
 
-config BR2_RISCV_ISA_RVA
+config BR2_RISCV_ISA_CUSTOM_RVA
 	bool "Atomic Instructions (A)"
+	select BR2_RISCV_ISA_RVA
 
-config BR2_RISCV_ISA_RVF
+config BR2_RISCV_ISA_CUSTOM_RVF
 	bool "Single-precision Floating-point (F)"
+	select BR2_RISCV_ISA_RVF
 
-config BR2_RISCV_ISA_RVD
+config BR2_RISCV_ISA_CUSTOM_RVD
 	bool "Double-precision Floating-point (D)"
 	depends on BR2_RISCV_ISA_RVF
+	select BR2_RISCV_ISA_RVD
 
-config BR2_RISCV_ISA_RVC
+config BR2_RISCV_ISA_CUSTOM_RVC
 	bool "Compressed Instructions (C)"
-
-config BR2_RISCV_ISA_RVV
-	bool "Vector Instructions (V)"
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_12
+	select BR2_RISCV_ISA_RVC
+endif
 
 choice
 	prompt "Target Architecture Size"

arch/Config.in.x86

@@ -19,20 +19,12 @@ config BR2_X86_CPU_HAS_AVX
 	bool
 config BR2_X86_CPU_HAS_AVX2
 	bool
-
-# BR2_X86_CPU_HAS_AVX512 implies the following AVX512 extensions:
-#   AVX512F, AVX512BW, AVX512CD, AVX512DQ, AVX512VL
-# This subset is common to Intel Xeon (excl Xeon Phi), AMD Zen 4, and
-# the x86-64-v4 psABI.
-#
-# Only select BR2_X86_CPU_HAS_AVX512 if the CPU supports this entire
-# subset of extensions.
 config BR2_X86_CPU_HAS_AVX512
 	bool
 
 # This list of CPU architecture variant is (loosely) ordered according
 # to the gcc documentation at
-# https://gcc.gnu.org/onlinedocs/gcc-13.2.0/gcc/x86-Options.html
+# https://gcc.gnu.org/onlinedocs/gcc-11.2.0/gcc/x86-Options.html
 choice
 	prompt "Target Architecture Variant"
 	default BR2_x86_i586 if BR2_i386
@@ -235,17 +227,6 @@ config BR2_x86_sandybridge
 	select BR2_X86_CPU_HAS_SSE42
 	select BR2_X86_CPU_HAS_AVX
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_4_9
-config BR2_x86_ivybridge
-	bool "ivybridge"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_4_9
 config BR2_x86_core_avx2
 	bool "core-avx2"
 	select BR2_X86_CPU_HAS_MMX
@@ -354,54 +335,6 @@ config BR2_x86_tremont
 	select BR2_X86_CPU_HAS_SSE4
 	select BR2_X86_CPU_HAS_SSE42
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_9
-config BR2_x86_sierraforest
-	bool "sierraforest"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_13
-config BR2_x86_grandridge
-	bool "grandridge"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_13
-config BR2_x86_knightslanding
-	bool "knightslanding"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_5
-config BR2_x86_knightsmill
-	bool "knightsmill"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_8
 config BR2_x86_skylake_avx512
 	bool "skylake-avx512"
 	select BR2_X86_CPU_HAS_MMX
@@ -506,8 +439,6 @@ config BR2_x86_sapphirerapids
 	select BR2_X86_CPU_HAS_AVX2
 	select BR2_X86_CPU_HAS_AVX512
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_11
-	help
-	  Use for Sapphire Rapids, Emerald Rapids
 config BR2_x86_alderlake
 	bool "alderlake"
 	select BR2_X86_CPU_HAS_MMX
@@ -519,9 +450,8 @@ config BR2_x86_alderlake
 	select BR2_X86_CPU_HAS_SSE42
 	select BR2_X86_CPU_HAS_AVX
 	select BR2_X86_CPU_HAS_AVX2
+	select BR2_X86_CPU_HAS_AVX512
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_11
-	help
-	  Use for Alder Lake, Raptor Lake, Meteor Lake
 config BR2_x86_rocketlake
 	bool "rocketlake"
 	select BR2_X86_CPU_HAS_MMX
@@ -535,32 +465,6 @@ config BR2_x86_rocketlake
 	select BR2_X86_CPU_HAS_AVX2
 	select BR2_X86_CPU_HAS_AVX512
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_11
-config BR2_x86_graniterapids
-	bool "graniterapids"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_X86_CPU_HAS_AVX512
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_13
-config BR2_x86_graniterapids_d
-	bool "graniterapids-d"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_X86_CPU_HAS_AVX512
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_13
 config BR2_x86_k6
 	bool "k6"
 	depends on !BR2_x86_64
@@ -598,13 +502,6 @@ config BR2_x86_barcelona
 	select BR2_X86_CPU_HAS_SSE
 	select BR2_X86_CPU_HAS_SSE2
 	select BR2_X86_CPU_HAS_SSE3
-config BR2_x86_bobcat
-	bool "bobcat"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
 config BR2_x86_jaguar
 	bool "jaguar"
 	select BR2_X86_CPU_HAS_MMX
@@ -614,25 +511,6 @@ config BR2_x86_jaguar
 	select BR2_X86_CPU_HAS_SSSE3
 	select BR2_X86_CPU_HAS_SSE4
 	select BR2_X86_CPU_HAS_SSE42
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_4_8
-config BR2_x86_bulldozer
-	bool "bulldozer"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-config BR2_x86_piledriver
-	bool "piledriver"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
 config BR2_x86_steamroller
 	bool "steamroller"
 	select BR2_X86_CPU_HAS_MMX
@@ -642,73 +520,12 @@ config BR2_x86_steamroller
 	select BR2_X86_CPU_HAS_SSSE3
 	select BR2_X86_CPU_HAS_SSE4
 	select BR2_X86_CPU_HAS_SSE42
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_4_8
-config BR2_x86_excavator
-	bool "excavator"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_4_9
-config BR2_x86_zen
-	bool "zen"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_6
-config BR2_x86_zen2
-	bool "zen 2"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_9
-config BR2_x86_zen3
-	bool "zen 3"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_11
-config BR2_x86_zen4
-	bool "zen 4"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_X86_CPU_HAS_AVX512
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_13
 config BR2_x86_geode
-	bool "AMD Geode"
+	bool "geode"
+	# Don't include MMX support because there several variant of geode
+	# processor, some with MMX support, some without.
+	# See: http://en.wikipedia.org/wiki/Geode_%28processor%29
 	depends on !BR2_x86_64
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_3DNOW
 config BR2_x86_c3
 	bool "Via/Cyrix C3 (Samuel/Ezra cores)"
 	depends on !BR2_x86_64
@@ -776,7 +593,6 @@ config BR2_GCC_TARGET_ARCH
 	default "nehalem"	if BR2_x86_nehalem
 	default "corei7-avx"	if BR2_x86_corei7_avx
 	default "sandybridge"	if BR2_x86_sandybridge
-	default "ivybridge"	if BR2_x86_ivybridge
 	default "core-avx2"	if BR2_x86_core_avx2
 	default "haswell"	if BR2_x86_haswell
 	default "broadwell"	if BR2_x86_broadwell
@@ -788,10 +604,6 @@ config BR2_GCC_TARGET_ARCH
 	default "goldmont"	if BR2_x86_goldmont
 	default "goldmont-plus"	if BR2_x86_goldmont_plus
 	default "tremont"	if BR2_x86_tremont
-	default "sierraforest"	if BR2_x86_sierraforest
-	default "grandridge"	if BR2_x86_grandridge
-	default "knl"		if BR2_x86_knightslanding
-	default "knm"		if BR2_x86_knightsmill
 	default "skylake-avx512" if BR2_x86_skylake_avx512
 	default "cannonlake"	if BR2_x86_cannonlake
 	default "icelake-client" if BR2_x86_icelake_client
@@ -802,21 +614,11 @@ config BR2_GCC_TARGET_ARCH
 	default "sapphirerapids" if BR2_x86_sapphirerapids
 	default "alderlake"	if BR2_x86_alderlake
 	default "rocketlake"	if BR2_x86_rocketlake
-	default "graniterapids"	if BR2_x86_graniterapids
-	default "graniterapids-d"	if BR2_x86_graniterapids_d
 	default "k8"		if BR2_x86_opteron
 	default "k8-sse3"	if BR2_x86_opteron_sse3
 	default "barcelona"	if BR2_x86_barcelona
-	default "btver1"	if BR2_x86_bobcat
 	default "btver2"	if BR2_x86_jaguar
-	default "bdver1"	if BR2_x86_bulldozer
-	default "bdver2"	if BR2_x86_piledriver
 	default "bdver3"	if BR2_x86_steamroller
-	default "bdver4"	if BR2_x86_excavator
-	default "znver1"	if BR2_x86_zen
-	default "znver2"	if BR2_x86_zen2
-	default "znver3"	if BR2_x86_zen3
-	default "znver4"	if BR2_x86_zen4
 	default "k6"		if BR2_x86_k6
 	default "k6-2"		if BR2_x86_k6_2
 	default "athlon"	if BR2_x86_athlon

arch/arch.mk.riscv

@@ -26,9 +26,6 @@ endif
 ifeq ($(BR2_RISCV_ISA_RVC),y)
 GCC_TARGET_ARCH := $(GCC_TARGET_ARCH)c
 endif
-ifeq ($(BR2_RISCV_ISA_RVV),y)
-GCC_TARGET_ARCH := $(GCC_TARGET_ARCH)v
-endif
 
 # Starting from gcc 12.x, csr and fence instructions have been
 # separated from the base I instruction set, and special -march

board/arrow/avenger96/patches/arm-trusted-firmware/0001-stm32mp157a-avenger96.dts-enable-hash-device-to-unbr.patch

@@ -1,51 +0,0 @@
-From 336dc301e02d64507447f82020ce7a349797bef3 Mon Sep 17 00:00:00 2001
-From: Peter Korsgaard <peter@korsgaard.com>
-Date: Sun, 5 Nov 2023 14:59:16 +0100
-Subject: [PATCH] stm32mp157a-avenger96.dts: enable hash device to unbreak boot
- issue
-
-The avenger96 board was forgotten when authentication support was added with
-commit 4bdb1a7a6a1325343 (stm32mp1: add authentication support for
-stm32image), causing a panic when stm32mp_init_auth() is called, so fix it
-similar to how it was done for the STM32MP157C-ED1 board with:
-
-commit b37b52ef8bc05bfd8dcca992d4ba84cd7c5d23bb
-Author: Yann Gautier <yann.gautier@st.com>
-Date:   Tue Oct 13 18:05:06 2020 +0200
-
-    fdts: add missing hash node in STM32MP157C-ED1 board DT
-
-    Without this node, the board fails to boot and panics in the function
-    stm32mp_init_auth().
-
-    Change-Id: Ia54924410dac2a8c94dd6e45d7e93977fe7d87e2
-    Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
-Upstream: N/A - Upstream reworked authentication to skip it for MP157A
- variant since v2.7, see "feat(st): disable authentication based on
- part_number"
- (https://github.com/ARM-software/arm-trusted-firmware/commit/49abdfd8cececb91a4bc7e7b29a30c09dce461c7)
-
-Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
----
- fdts/stm32mp157a-avenger96.dts | 4 ++++
- 1 file changed, 4 insertions(+)
-
-diff --git a/fdts/stm32mp157a-avenger96.dts b/fdts/stm32mp157a-avenger96.dts
-index b967736e4..76edecb83 100644
---- a/fdts/stm32mp157a-avenger96.dts
-+++ b/fdts/stm32mp157a-avenger96.dts
-@@ -271,6 +271,10 @@
- 	};
- };
- 
-+&hash1 {
-+	status = "okay";
-+};
-+
- &rng1 {
- 	status = "okay";
- };
--- 
-2.39.2
-

board/asus/tinker-s/extlinux.conf

@@ -1,4 +0,0 @@
-label Tinker linux
-  kernel /boot/uImage
-  devicetree /boot/rk3288-tinker-s.dtb
-  append console=ttyS2,115200n8 root=179:1 rootwait

board/asus/tinker-s/post-build.sh

@@ -1,9 +0,0 @@
-#!/bin/sh
-
-MKIMAGE=$HOST_DIR/bin/mkimage
-BOARD_DIR="$(dirname "$0")"
-
-$MKIMAGE -n rk3288 -T rksd -d "$BINARIES_DIR"/u-boot-tpl.bin "$BINARIES_DIR"/u-boot-tpl.img
-cat "$BINARIES_DIR"/u-boot-tpl.img "$BINARIES_DIR"/u-boot-spl-dtb.bin > "$BINARIES_DIR"/u-boot-tpl-spl-dtb.img
-
-install -m 0644 -D "$BOARD_DIR"/extlinux.conf "$TARGET_DIR"/boot/extlinux/extlinux.conf

board/asus/tinker-s/readme.txt

@@ -1,43 +0,0 @@
-Tinker S RK3288
-=============
-
-Tinker Board is a Single Board Computer (SBC) in an ultra-small form
-factor that offers class-leading performance while leveraging outstanding
-mechanical compatibility. The "S" variant of the Tinker Board has eMMC
-
-Tinker link:
-https://www.asus.com/br/motherboards-components/single-board-computer/all-series/tinker-board-s/
-
-Wiki link:
-https://openedev.amarulasolutions.com/display/ODWIKI/Tinker+RK3288
-
-How to build it
-===============
-
-  $ make asus_tinker-s_rk3288_defconfig
-
-Then you can edit the build options using
-
-  $ make menuconfig
-
-Compile all and build rootfs image:
-
-  $ make
-
-Prepare your SDCard
-===================
-
-Buildroot generates a ready-to-use SD card image that you can flash directly to
-the card. The image will be in output/images/sdcard.img.
-You can write this image directly to an SD card device (i.e. /dev/xxx):
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/xxx
-  $ sudo sync
-
-Finally, you can insert the SD card to the Tinker RK3288 board and boot it.
-
-NOTE:
-USB power supply requires more than the standard 500mA USB current, so
-this board must be supplied from a capable port or from an external
-AC/DC adapter. Otherwise it will hang forever while loading the kernel
-image.

board/bananapi/bananapi-m2-berry/extlinux.conf

@@ -1,4 +0,0 @@
-label Bananapi M2 Berry linux
-  kernel /boot/zImage
-  devicetree /boot/sun8i-v40-bananapi-m2-berry.dtb
-  append console=ttyS0,115200n8 root=/dev/mmcblk0p1 rootwait

board/bananapi/bananapi-m2-berry/genimage.cfg

@@ -1,16 +0,0 @@
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot-sunxi-with-spl.bin"
-		offset = 8K
-		size = 1016K # 1MB - 8KB
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}

board/bananapi/bananapi-m2-berry/post-build.sh

@@ -1,6 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname "$0")"
-
-install -m 644 -D "${BOARD_DIR}"/extlinux.conf \
-	"${TARGET_DIR}"/boot/extlinux/extlinux.conf

board/bananapi/bananapi-m2-berry/readme.txt

@@ -1,35 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Bananapi M2 Berry. With the current
-configuration it will bring-up the board, and allow access through the
-serial console.
-
-Bananapi M2 Berry link:
-https://wiki.banana-pi.org/Banana_Pi_BPI-M2_Berry
-
-This configuration uses U-Boot mainline and kernel mainline.
-
-How to build
-============
-
-    $ make bananapi_m2_berry_defconfig
-    $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
-  $ sudo sync
-
-Insert the micro SDcard in your Bananapi M2 Berry and power it up. The console
-is on the serial line, 115200 8N1.

board/bananapi/bananapi-m2-ultra/boot.cmd

@@ -1,5 +1,7 @@
-setenv fdt_high ffffffff
 setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
+
+mmc dev 0
 fatload mmc 0 $kernel_addr_r zImage
-fatload mmc 0 $fdt_addr_r sun7i-a20-icnova-a20-adb4006.dtb
+fatload mmc 0 $fdt_addr_r sun8i-r40-bananapi-m2-ultra.dtb
+
 bootz $kernel_addr_r - $fdt_addr_r

board/bananapi/bananapi-m2-ultra/extlinux.conf

@@ -1,4 +0,0 @@
-label Bananapi M2 Ultra linux
-  kernel /boot/zImage
-  devicetree /boot/sun8i-r40-bananapi-m2-ultra.dtb
-  append console=ttyS0,115200n8 root=/dev/mmcblk0p1 rootwait

board/bananapi/bananapi-m2-ultra/genimage.cfg

@@ -1,3 +1,15 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"zImage",
+			"sun8i-r40-bananapi-m2-ultra.dtb",
+			"boot.scr"
+		}
+	}
+
+	size = 64M
+}
+
 image sdcard.img {
 	hdimage {
 	}
@@ -9,6 +21,12 @@ image sdcard.img {
 		size = 1016K # 1MB - 8KB
 	}
 
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
 	partition rootfs {
 		partition-type = 0x83
 		image = "rootfs.ext4"

board/bananapi/bananapi-m2-ultra/post-build.sh

@@ -1,6 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname "$0")"
-
-install -m 644 -D "${BOARD_DIR}"/extlinux.conf \
-	"${TARGET_DIR}"/boot/extlinux/extlinux.conf

board/beaglev/patches/uboot/0001-riscv-Fix-build-against-binutils-2.38.patch

@@ -1,58 +0,0 @@
-From 0cf11f3c0478f4286adcfb09bf9137f8b00212e3 Mon Sep 17 00:00:00 2001
-From: Alexandre Ghiti <alexandre.ghiti@canonical.com>
-Date: Mon, 3 Oct 2022 18:07:54 +0200
-Subject: [PATCH] riscv: Fix build against binutils 2.38
-
-The following description is copied from the equivalent patch for the
-Linux Kernel proposed by Aurelien Jarno:
-
->From version 2.38, binutils default to ISA spec version 20191213. This
-means that the csr read/write (csrr*/csrw*) instructions and fence.i
-instruction has separated from the `I` extension, become two standalone
-extensions: Zicsr and Zifencei. As the kernel uses those instruction,
-this causes the following build failure:
-
-arch/riscv/cpu/mtrap.S: Assembler messages:
-arch/riscv/cpu/mtrap.S:65: Error: unrecognized opcode `csrr a0,scause'
-arch/riscv/cpu/mtrap.S:66: Error: unrecognized opcode `csrr a1,sepc'
-arch/riscv/cpu/mtrap.S:67: Error: unrecognized opcode `csrr a2,stval'
-arch/riscv/cpu/mtrap.S:70: Error: unrecognized opcode `csrw sepc,a0'
-
-Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
-Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
-Tested-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
-Tested-by: Heiko Stuebner <heiko@sntech.de>
-Tested-by: Christian Stewart <christian@paral.in>
-Reviewed-by: Rick Chen <rick@andestech.com>
-(cherry picked from commit 1dde977518f13824b847e23275001191139bc384)
-Upstream: https://gitlab.com/u-boot/u-boot/-/commit/1dde977518f13824b847e23275001191139bc384
-Signed-off-by: Romain Naour <romain.naour@gmail.com>
----
- arch/riscv/Makefile | 11 ++++++++++-
- 1 file changed, 10 insertions(+), 1 deletion(-)
-
-diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
-index 0b80eb8d864..53d1194ffb6 100644
---- a/arch/riscv/Makefile
-+++ b/arch/riscv/Makefile
-@@ -24,7 +24,16 @@ ifeq ($(CONFIG_CMODEL_MEDANY),y)
- 	CMODEL = medany
- endif
- 
--ARCH_FLAGS = -march=$(ARCH_BASE)$(ARCH_A)$(ARCH_C) -mabi=$(ABI) \
-+RISCV_MARCH = $(ARCH_BASE)$(ARCH_A)$(ARCH_C)
-+
-+# Newer binutils versions default to ISA spec version 20191213 which moves some
-+# instructions from the I extension to the Zicsr and Zifencei extensions.
-+toolchain-need-zicsr-zifencei := $(call cc-option-yn, -mabi=$(ABI) -march=$(RISCV_MARCH)_zicsr_zifencei)
-+ifeq ($(toolchain-need-zicsr-zifencei),y)
-+	RISCV_MARCH := $(RISCV_MARCH)_zicsr_zifencei
-+endif
-+
-+ARCH_FLAGS = -march=$(RISCV_MARCH) -mabi=$(ABI) \
- 	     -mcmodel=$(CMODEL)
- 
- PLATFORM_CPPFLAGS	+= $(ARCH_FLAGS)
--- 
-2.41.0
-

board/bsh/imx8mn-bsh-smm-s2/readme.txt

@@ -2,7 +2,7 @@ i.MX8MN BSH SMM S2
 ==================
 
 This tutorial describes how to use the predefined Buildroot
-configuration for the i.MX8MN BSH SMM S2 board.
+configuration for the i.MX8MN BSH SMM S2 PRO board.
 
 Building
 --------

board/canaan/k210-soc/patches/uboot/0001-riscv-Fix-build-against-binutils-2.38.patch

@@ -1,58 +0,0 @@
-From 0cf11f3c0478f4286adcfb09bf9137f8b00212e3 Mon Sep 17 00:00:00 2001
-From: Alexandre Ghiti <alexandre.ghiti@canonical.com>
-Date: Mon, 3 Oct 2022 18:07:54 +0200
-Subject: [PATCH] riscv: Fix build against binutils 2.38
-
-The following description is copied from the equivalent patch for the
-Linux Kernel proposed by Aurelien Jarno:
-
->From version 2.38, binutils default to ISA spec version 20191213. This
-means that the csr read/write (csrr*/csrw*) instructions and fence.i
-instruction has separated from the `I` extension, become two standalone
-extensions: Zicsr and Zifencei. As the kernel uses those instruction,
-this causes the following build failure:
-
-arch/riscv/cpu/mtrap.S: Assembler messages:
-arch/riscv/cpu/mtrap.S:65: Error: unrecognized opcode `csrr a0,scause'
-arch/riscv/cpu/mtrap.S:66: Error: unrecognized opcode `csrr a1,sepc'
-arch/riscv/cpu/mtrap.S:67: Error: unrecognized opcode `csrr a2,stval'
-arch/riscv/cpu/mtrap.S:70: Error: unrecognized opcode `csrw sepc,a0'
-
-Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
-Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
-Tested-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
-Tested-by: Heiko Stuebner <heiko@sntech.de>
-Tested-by: Christian Stewart <christian@paral.in>
-Reviewed-by: Rick Chen <rick@andestech.com>
-(cherry picked from commit 1dde977518f13824b847e23275001191139bc384)
-Upstream: https://gitlab.com/u-boot/u-boot/-/commit/1dde977518f13824b847e23275001191139bc384
-Signed-off-by: Romain Naour <romain.naour@gmail.com>
----
- arch/riscv/Makefile | 11 ++++++++++-
- 1 file changed, 10 insertions(+), 1 deletion(-)
-
-diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
-index 0b80eb8d864..53d1194ffb6 100644
---- a/arch/riscv/Makefile
-+++ b/arch/riscv/Makefile
-@@ -24,7 +24,16 @@ ifeq ($(CONFIG_CMODEL_MEDANY),y)
- 	CMODEL = medany
- endif
- 
--ARCH_FLAGS = -march=$(ARCH_BASE)$(ARCH_A)$(ARCH_C) -mabi=$(ABI) \
-+RISCV_MARCH = $(ARCH_BASE)$(ARCH_A)$(ARCH_C)
-+
-+# Newer binutils versions default to ISA spec version 20191213 which moves some
-+# instructions from the I extension to the Zicsr and Zifencei extensions.
-+toolchain-need-zicsr-zifencei := $(call cc-option-yn, -mabi=$(ABI) -march=$(RISCV_MARCH)_zicsr_zifencei)
-+ifeq ($(toolchain-need-zicsr-zifencei),y)
-+	RISCV_MARCH := $(RISCV_MARCH)_zicsr_zifencei
-+endif
-+
-+ARCH_FLAGS = -march=$(RISCV_MARCH) -mabi=$(ABI) \
- 	     -mcmodel=$(CMODEL)
- 
- PLATFORM_CPPFLAGS	+= $(ARCH_FLAGS)
--- 
-2.41.0
-

board/firefly/roc-rk3399-pc/extlinux.conf

@@ -1,4 +0,0 @@
-label RK3399RocPC linux
-  kernel /boot/Image
-  devicetree /boot/rk3399-roc-pc.dtb
-  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk0p1 rootwait

board/firefly/roc-rk3399-pc/genimage.cfg

@@ -1,22 +0,0 @@
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot-tpl-spl-dtb {
-		in-partition-table = "no"
-		image = "idbloader.img"
-		offset = 32K
-	}
-
-	partition u-boot-dtb {
-		in-partition-table = "no"
-		image = "u-boot.itb"
-		offset = 8M
-		size = 30M
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}

board/firefly/roc-rk3399-pc/post-build.sh

@@ -1,5 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname "$0")"
-
-install -m 0644 -D "$BOARD_DIR"/extlinux.conf "$TARGET_DIR"/boot/extlinux/extlinux.conf

board/firefly/roc-rk3399-pc/readme.txt

@@ -1,40 +0,0 @@
-Libre Computer Board ROC-RK3399-PC
-===================================
-
-Build:
-
-  $ make roc_pc_rk3399_defconfig
-  $ make
-
-Files created in output directory
-=================================
-
-output/images
-
-├── bl31.elf
-├── idbloader.img
-├── Image
-├── rk3399-roc-pc.dtb
-├── rootfs.ext2
-├── rootfs.ext4 -> rootfs.ext2
-├── rootfs.tar
-├── sdcard.img
-├── u-boot.bin
-└── u-boot.itb
-
-Creating bootable SD card:
-==========================
-
-Simply invoke (as root)
-
-sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
-
-Where X is your SD card device
-
-Serial console
---------------
-
-Baudrate for this board is 1500000
-
-Wiki link:
-https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/roc-rk3399-pc.html

board/freescale/common/imx/imx8-bootloader-prepare.sh

@@ -63,8 +63,6 @@ main ()
 		dd if=${BINARIES_DIR}/u-boot-hash.bin of=${BINARIES_DIR}/u-boot-atf.bin bs=1K seek=128
 		if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8=y$" ${BR2_CONFIG}; then
 			${HOST_DIR}/bin/mkimage_imx8 -soc QM -rev B0 -append ${BINARIES_DIR}/ahab-container.img -c -scfw ${BINARIES_DIR}/mx8qm-mek-scfw-tcm.bin -ap ${BINARIES_DIR}/u-boot-atf.bin a53 0x80000000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
-	        elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8DXL=y$" ${BR2_CONFIG}; then
-			${HOST_DIR}/bin/mkimage_imx8 -soc DXL -rev B0 -append ${BINARIES_DIR}/ahab-container.img -c -scfw ${BINARIES_DIR}/mx8dxl-evk-scfw-tcm.bin -ap ${BINARIES_DIR}/u-boot-atf.bin a35 0x80000000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
 		else
 			${HOST_DIR}/bin/mkimage_imx8 -soc QX -rev B0 -append ${BINARIES_DIR}/ahab-container.img -c -scfw ${BINARIES_DIR}/mx8qx-mek-scfw-tcm.bin -ap ${BINARIES_DIR}/u-boot-atf.bin a35 0x80000000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
 		fi

board/freescale/common/imx/post-image.sh

@@ -46,8 +46,6 @@ genimage_type()
 		echo "genimage.cfg.template_imx8"
 	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X=y$" ${BR2_CONFIG}; then
 		echo "genimage.cfg.template_imx8"
-	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8DXL=y$" ${BR2_CONFIG}; then
-		echo "genimage.cfg.template_imx8"
 	elif grep -Eq "^BR2_LINUX_KERNEL_INSTALL_TARGET=y$" ${BR2_CONFIG}; then
 		if grep -Eq "^BR2_TARGET_UBOOT_SPL=y$" ${BR2_CONFIG}; then
 		    echo "genimage.cfg.template_no_boot_part_spl"

board/freescale/common/patches/arm-trusted-firmware/0001-feat-build-add-support-for-new-binutils-versions.patch

@@ -1,61 +0,0 @@
-From 0f75b03c008eacb9818af3a56dc088e72a623d17 Mon Sep 17 00:00:00 2001
-From: Marco Felsch <m.felsch@pengutronix.de>
-Date: Wed, 9 Nov 2022 12:59:09 +0100
-Subject: [PATCH] feat(build): add support for new binutils versions
-
-Users of GNU ld (BPF) from binutils 2.39+ will observe multiple instaces
-of a new warning when linking the bl*.elf in the form:
-
-  ld.bfd: warning: stm32mp1_helper.o: missing .note.GNU-stack section implies executable stack
-  ld.bfd: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
-  ld.bfd: warning: bl2.elf has a LOAD segment with RWX permissions
-  ld.bfd: warning: bl32.elf has a LOAD segment with RWX permissions
-
-These new warnings are enbaled by default to secure elf binaries:
- - https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ba951afb99912da01a6e8434126b8fac7aa75107
- - https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=0d38576a34ec64a1b4500c9277a8e9d0f07e6774
-
-Fix it in a similar way to what the Linux kernel does, see:
-https://lore.kernel.org/all/20220810222442.2296651-1-ndesaulniers@google.com/
-
-Following the reasoning there, we set "-z noexecstack" for all linkers
-(although LLVM's LLD defaults to it) and optional add
---no-warn-rwx-segments since this a ld.bfd related.
-
-Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
-Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
-Change-Id: I9430f5fa5036ca88da46cd3b945754d62616b617
-Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
-Upstream: https://github.com/ARM-software/arm-trusted-firmware/commit/1f49db5f25cdd4e43825c9bcc0575070b80f628c
----
- Makefile | 7 ++++++-
- 1 file changed, 6 insertions(+), 1 deletion(-)
-
-diff --git a/Makefile b/Makefile
-index 1ddb7b844..470956b19 100644
---- a/Makefile
-+++ b/Makefile
-@@ -416,6 +416,8 @@ endif
- 
- GCC_V_OUTPUT		:=	$(shell $(CC) -v 2>&1)
- 
-+TF_LDFLAGS		+=	-z noexecstack
-+
- # LD = armlink
- ifneq ($(findstring armlink,$(notdir $(LD))),)
- TF_LDFLAGS		+=	--diag_error=warning --lto_level=O1
-@@ -442,7 +444,10 @@ TF_LDFLAGS		+=	$(subst --,-Xlinker --,$(TF_LDFLAGS_$(ARCH)))
- 
- # LD = gcc-ld (ld) or llvm-ld (ld.lld) or other
- else
--TF_LDFLAGS		+=	--fatal-warnings -O1
-+# With ld.bfd version 2.39 and newer new warnings are added. Skip those since we
-+# are not loaded by a elf loader.
-+TF_LDFLAGS		+=	$(call ld_option, --no-warn-rwx-segments)
-+TF_LDFLAGS		+=	-O1
- TF_LDFLAGS		+=	--gc-sections
- # ld.lld doesn't recognize the errata flags,
- # therefore don't add those in that case
--- 
-2.30.2
-

board/freescale/common/patches/arm-trusted-firmware/0002-LF-7968-01-fix-Makefile-Suppress-array-bounds-error.patch

@@ -1,51 +0,0 @@
-From b2a94de52ae4a940a87d569815b19d3fa92dd32a Mon Sep 17 00:00:00 2001
-From: Tom Hochstein <tom.hochstein@nxp.com>
-Date: Mon, 16 May 2022 13:45:16 -0500
-Subject: [PATCH] LF-7968-01 fix(Makefile): Suppress array-bounds error
-
-The array-bounds error is triggered now in cases where it was silent
-before, causing errors like:
-
-```
-plat/imx/imx8m/hab.c: In function 'imx_hab_handler':
-plat/imx/imx8m/hab.c:64:57: error: array subscript 0 is outside array bounds of 'uint32_t[0]' {aka 'unsigned int[]'} [-Werror=array-bounds]
-   64 | #define HAB_RVT_CHECK_TARGET_ARM64      ((unsigned long)*(uint32_t *)(HAB_RVT_BASE + 0x18))
-      |                                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-```
-
-The error is a false-positive and is entered as a bug [1]. The problem
-is fixed partially in GCC 12 and fully in GCC 13 [2].
-
-The partial fix does not work here because the constant addresses used
-are less than the 4kB boundary chosen for the partial fix, so suppress
-the error until GCC is upgraded to 13.
-
-[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578
-[2] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578#c39
-
-Upstream-Status: Inappropriate [other]
-Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
-Signed-off-by: Jacky Bai <ping.bai@nxp.com>
-Reviewed-by: Ye Li <ye.li@nxp.com>
-Signed-off-by: Brandon Maier <brandon.maier@collins.com>
-Upstream: https://github.com/nxp-imx/imx-atf/commit/058bf0f104115037d03e277f079825ef3659c5b9
----
- Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/Makefile b/Makefile
-index c87c3ae08..2d6b90f47 100644
---- a/Makefile
-+++ b/Makefile
-@@ -346,7 +346,7 @@ WARNINGS	+=		-Wshift-overflow -Wshift-sign-overflow \
- endif
- 
- ifneq (${E},0)
--ERRORS := -Werror
-+ERRORS := -Werror -Wno-error=array-bounds
- endif
- 
- CPPFLAGS		=	${DEFINES} ${INCLUDES} ${MBEDTLS_INC} -nostdinc	\
--- 
-2.41.0
-

board/freescale/imx8dxlevk/readme.txt

@@ -1,69 +0,0 @@
-******************************
-Freescale i.MX8DXL WEVK board
-******************************
-
-This file documents the Buildroot support for the Freescale i.MX8DXL WEVK
-board.
-
-Build
-=====
-
-First, configure Buildroot for the i.MX8DXL WEVK board:
-
-  make freescale_imx8dxlevk_defconfig
-
-Build all components:
-
-  make
-
-You will find in output/images/ the following files:
-  - ahab-container.img
-  - bl31.bin
-  - boot.vfat
-  - Image
-  - imx8-boot-sd.bin
-  - imx8dxl-evk.dtb
-  - mkimg.commit
-  - mx8dxl-ddr3-evk-scfw-tcm.bin
-  - mx8dxl-evk-scfw-tcm.bin
-  - mx8dxl-phantom-mek-scfw-tcm.bin
-  - mx8dxl-val-scfw-tcm.bin
-  - rootfs.ext2
-  - rootfs.ext4
-  - rootfs.tar
-  - sdcard.img
-  - u-boot-atf.bin
-  - u-boot.bin
-  - u-boot-hash.bin
-
-Create a bootable SD card
-=========================
-
-To determine the device associated to the SD card have a look in the
-/proc/partitions file:
-
-  cat /proc/partitions
-
-Buildroot prepares a bootable "sdcard.img" image in the output/images/
-directory, ready to be dumped on a SD card. Launch the following
-command as root:
-
-  dd if=output/images/sdcard.img of=/dev/<your-sd-device>
-
-*** WARNING! This will destroy all the card content. Use with care! ***
-
-For details about the medium image layout, see the definition in
-board/freescale/common/imx/genimage.cfg.template_imx8.
-
-Boot the i.MX8DXL WEVK board
-============================
-
-To boot your newly created system:
-- insert the SD card in the SD slot of the board;
-- Configure the boot switch as follows:
-SW1:	ON	ON	OFF	OFF
-- put a micro USB cable into the Debug USB Port and connect using a terminal
-  emulator at 115200 bps, 8n1;
-- power on the board.
-
-Enjoy!

board/freescale/imx8mpevk/uboot-fragment.config

@@ -1,3 +0,0 @@
-# Use the upstream devicetree name for EVK board
-# Revert https://github.com/nxp-imx/uboot-imx/commit/a60e787a6e35b9c14c391e03d41468e4ad63d598
-CONFIG_DEFAULT_FDT_FILE="imx8mp-evk.dtb"

board/freescale/imxrt1050evk/genimage.cfg

@@ -1,40 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"uImage",
-			"imxrt1050-evk.dtb",
-		}
-	}
-
-	size = 8M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition SPL {
-		in-partition-table = "no"
-		image = "SPL"
-		offset = 1K
-		size = 127K
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot.img"
-		offset = 128K
-		size = 512K
-	}
-
-	partition boot {
-		partition-type = 0xc
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}

board/freescale/imxrt1050evk/readme.txt

@@ -1,30 +0,0 @@
-NXP i.MXRT1050 EVK board
-------------------------
-
-i.MX RT1050 are NXP's crossover MCUs. They combine the high performance and high
-level of integration of an applications processors with the ease-of-use and
-real-time functionality of a microcontroller. The i.MX RT1050 MCU runs on the Arm
-Cortex-M7 core at 600 MHz.
-https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/i-mx-rt1050-evaluation-kit:MIMXRT1050-EVK
-
-To build a minimal support for this board:
-
-$ make imxrt1050-evk_defconfig
-$ make
-
-Buildroot prepares a bootable "sdcard.img" image in the output/images/
-directory, ready to be flashed into the SD card:
-
-$ dd if=output/images/sdcard.img of=/dev/sdX
-Where 'sdX' is the device node of the uSD.
-
-Jumper settings:
-
-   SW7: 1 0 1 0
-
-Where 0 means bottom position and 1 means top position (from the
-switch label numbers reference).
-
-Connect the USB cable between the EVK and the PC for the console.
-
-Insert the micro SD card in the board, power it up and U-Boot messages should come up.

board/freescale/imxrt1050evk/uboot.fragment

@@ -1,2 +0,0 @@
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="setenv bootargs console=ttyLP0 root=/dev/mmcblk0p2 rw earlycon rootwait;load mmc 0:1 0x80800000 imxrt1050-evk.dtb;load mmc 0:1 0x80000000 uImage;bootm 0x80000000 - 0x80800000"

board/freescale/ls1046a-frwy/genimage.cfg

@@ -1,29 +0,0 @@
-image sdcard.img {
-	hdimage {
-	}
-
-	partition fsbl {
-		offset = 4K
-		in-partition-table = "no"
-		image = "bl2_sd.pbl"
-	}
-
-	partition ssbl {
-		offset = 1M
-		in-partition-table = "no"
-		image = "fip.bin"
-	}
-
-	partition fman {
-		offset = 9M
-		in-partition-table = "no"
-		image = "fsl_fman_ucode_ls1046_r1.0_106_4_18.bin"
-	}
-
-	partition rootfs {
-		offset = 16M
-		partition-type = 0x83
-		bootable = "true"
-		image = "rootfs.ext4"
-	}
-}

board/freescale/ls1046a-frwy/readme.txt

@@ -1,90 +0,0 @@
-**************
-NXP LS1046A-FRWY
-**************
-
-This file documents the Buildroot support for the LS1046A Freeway Board.
-
-for more details about the board and the QorIQ Layerscape SoC, see the following pages:
-  - https://www.nxp.com/design/software/qoriq-developer-resources/ls1046a-freeway-board:FRWY-LS1046A
-  - https://www.nxp.com/FRWY-LS1046A
-  - https://www.nxp.com/docs/en/quick-reference-guide/FRWY-LS1046AGSG.pdf
-
-for the software NXP LSDK (Layerscape Software Development Kit), see
-  - https://www.nxp.com/docs/en/user-guide/LSDKUG_Rev21.08.pdf
-
-the components from NXP are:
-  - rcw, LSDK 21.08
-  - atf (fork), LSDK 21.08
-  - uboot (fork), LSDK 21.08
-  - qoriq-fm-ucode (blob), LSDK 21.08
-  - linux (fork), LSDK 21.08
-
-Build
-=====
-
-First, configure Buildroot for the LS1046A-FRWY board:
-
-  make ls1046a-frwy_defconfig
-
-Build all components:
-
-  make
-
-You will find in output/images/ the following files:
-  - bl2_sd.pbl
-  - fip.bin
-  - fsl_fman_ucode_ls1046_r1.0_106_4_18.bin
-  - fsl_fman_ucode_ls1046_r1.0_108_4_9.bin
-  - fsl-ls1046a-frwy.dtb
-  - fsl-ls1046a-frwy-sdk.dtb
-  - Image
-  - PBL.bin
-  - rootfs.ext2
-  - rootfs.ext4
-  - sdcard.img
-  - u-boot.bin
-
-Create a bootable SD card
-=========================
-
-To determine the device associated to the SD card have a look in the
-/proc/partitions file:
-
-  cat /proc/partitions
-
-Buildroot prepares a bootable "sdcard.img" image in the output/images/
-directory, ready to be dumped on a SD card. Launch the following
-command as root:
-
-  dd if=output/images/sdcard.img of=/dev/sdX
-
-*** WARNING! This will destroy all the card content. Use with care! ***
-
-For details about the medium image layout, see the definition in
-board/freescale/ls1046a-frwy/genimage.cfg.
-
-Boot the LS1046A-FRWY board
-=========================
-
-To boot your newly created system:
-- insert the SD card in the SD slot of the board;
-- Configure the switches SW1[1:9] = 0_0100_0000 (select SD Card boot option)
-- put a Micro-USB cable into UART1 Port and connect using a terminal emulator
-  at 115200 bps, 8n1. Or remove the jumper on J72, connect a USB to TTL cable
-  to J73, and connect using a terminal emualtor at 115200 bps, 8n1.
-- power on the board.
-
-The front panel Ethernet connectors are off at boot, to bring them up run the
-following commands.
-
-1G PORT1
-  ip link set eth1 up
-
-1G PORT2
-  ip link set eth2 up
-
-1G PORT3
-  ip link set eth0 up
-
-1G PORT4
-  ip link set eth3 up

board/freescale/ls1046a-frwy/rootfs_overlay/boot/extlinux/extlinux.conf

@@ -1,4 +0,0 @@
-label ls1046afrwy-buildroot
-  kernel /boot/Image
-  devicetree /boot/fsl-ls1046a-frwy-sdk.dtb
-  append console=ttyS0,115200 root=/dev/mmcblk0p1 earlycon=uart8250,mmio,0x21c0500 rootwait

board/in-circuit/icnova-a20-adb4006/genimage.cfg

@@ -1,38 +0,0 @@
-# Minimal SD card image for the ICnova A20 SomPi on ADB4006
-# Based in the Cubieboard2 genimage.cfg
-
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"sun7i-a20-icnova-a20-adb4006.dtb",
-			"boot.scr"
-		}
-	}
-
-	size = 10M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot-sunxi-with-spl.bin"
-		offset = 8K
-		size = 1016K # 1MB - 8KB
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}

board/in-circuit/icnova-a20-adb4006/linux.fragment

@@ -1 +0,0 @@
-CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y

board/in-circuit/icnova-a20-adb4006/sun7i-a20-icnova-a20-adb4006.dts

@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-// Copyright (C) 2023 In-Circuit GmbH
-
-/dts-v1/;
-
-#include "sun7i-a20-icnova-a20.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	model = "In-Circuit ICnova A20 ADB4006";
-	compatible = "incircuit,icnova-a20-adb4006", "incircuit,icnova-a20",
-		     "allwinner,sun7i-a20";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	hdmi-connector {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con_in: endpoint {
-				remote-endpoint = <&hdmi_out_con>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-0 {
-			function = LED_FUNCTION_POWER;
-			color = <LED_COLOR_ID_YELLOW>;
-			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */
-			default-state = "on";
-		};
-
-		led-1 {
-			function = LED_FUNCTION_HEARTBEAT;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&ahci {
-	target-supply = <&reg_ahci_5v>;
-	status = "okay";
-};
-
-&codec {
-	status = "okay";
-};
-
-&de {
-	status = "okay";
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-&hdmi_out {
-	hdmi_out_con: endpoint {
-		remote-endpoint = <&hdmi_con_in>;
-	};
-};
-
-&mmc0 {
-	vmmc-supply = <&reg_vcc3v3>;
-	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
-	status = "okay";
-};
-
-&ohci0 {
-	status = "okay";
-};
-
-&ohci1 {
-	status = "okay";
-};
-
-&otg_sram {
-	status = "okay";
-};
-
-&reg_ahci_5v {
-	status = "okay";
-};
-
-&ac_power_supply {
-	status = "okay";
-};
-
-&reg_usb1_vbus {
-	status = "okay";
-};
-
-&reg_usb2_vbus {
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pb_pins>;
-	status = "okay";
-};
-
-&usb_otg {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usbphy {
-	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
-	usb1_vbus-supply = <&reg_usb1_vbus>;
-	usb2_vbus-supply = <&reg_usb2_vbus>;
-	status = "okay";
-};

board/in-circuit/icnova-a20-adb4006/sun7i-a20-icnova-a20-adb4006_uboot_defconfig

@@ -1,20 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-icnova-a20-adb4006"
-CONFIG_SPL=y
-CONFIG_MACH_SUN7I=y
-CONFIG_DRAM_CLK=384
-CONFIG_AHCI=y
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SYS_I2C_MVTWSI=y
-CONFIG_SYS_I2C_SLAVE=0x7f
-CONFIG_SYS_I2C_SPEED=400000
-CONFIG_ETH_DESIGNWARE=y
-CONFIG_MII=y
-CONFIG_SUN7I_GMAC=y
-CONFIG_AXP_ALDO4_VOLT=2800
-CONFIG_SCSI=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y

board/in-circuit/icnova-a20-adb4006/sun7i-a20-icnova-a20.dtsi

@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-// Copyright (C) 2023 In-Circuit GmbH
-
-#include "sun7i-a20.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-&cpu0 {
-	cpu-supply = <&reg_dcdc2>;
-};
-
-&gmac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_mii_pins>;
-	phy-handle = <&phy1>;
-	phy-mode = "mii";
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	axp209: pmic@34 {
-		reg = <0x34>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&gmac_mdio {
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-#include "axp209.dtsi"
-
-&reg_dcdc2 {
-	regulator-always-on;
-	regulator-min-microvolt = <1000000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-cpu";
-};
-
-&reg_dcdc3 {
-	regulator-always-on;
-	regulator-min-microvolt = <1000000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-int-dll";
-};
-
-&reg_ldo1 {
-	regulator-name = "vdd-rtc";
-};
-
-&reg_ldo2 {
-	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "avcc";
-};

board/intel/galileo/linux-3.14.config

@@ -154,9 +154,9 @@ CONFIG_TUN=y
 # CONFIG_NET_VENDOR_SILAN is not set
 # CONFIG_NET_VENDOR_SIS is not set
 # CONFIG_NET_VENDOR_SMSC is not set
-CONFIG_STMMAC_ETH=y
+CONFIG_STMMAC_ETH=m
 # CONFIG_STMMAC_PLATFORM is not set
-CONFIG_STMMAC_PCI=y
+CONFIG_STMMAC_PCI=m
 # CONFIG_NET_VENDOR_SUN is not set
 # CONFIG_NET_VENDOR_TEHUTI is not set
 # CONFIG_NET_VENDOR_TI is not set
@@ -306,6 +306,3 @@ CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_VIRTUALIZATION is not set
 CONFIG_CRC_T10DIF=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_IP_PNP=y

board/khadas/vim3/extlinux.conf

@@ -1,4 +0,0 @@
-default buildroot
-label buildroot
-   kernel /Image
-append root=/dev/mmcblk0p2 rootwait console=ttyAML0,115200

board/khadas/vim3/genimage.cfg

@@ -1,33 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"Image",
-			"meson-g12b-a311d-khadas-vim3.dtb",
-			"extlinux"
-		}
-
-		label = "boot"
-	}
-
-	size = 64M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image="boot.vfat"
-		size = 64M
-		offset = 2M
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext2"
-		size = 128M
-		offset = 0
-	}
-}

board/khadas/vim3/post-build.sh

@@ -1,5 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname "$0")"
-
-install -m 0644 -D "$BOARD_DIR"/extlinux.conf "$BINARIES_DIR"/extlinux/extlinux.conf

board/khadas/vim3/post-image.sh

@@ -1,23 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname "$0")"
-
-support/scripts/genimage.sh -c "${BOARD_DIR}/genimage.cfg"
-
-AMLOGIC_DIR=${BINARIES_DIR}/amlogic-boot-fip
-FIP_DIR=${BINARIES_DIR}/fip
-
-mkdir -p "${FIP_DIR}"
-
-(cd "${AMLOGIC_DIR}" && \
-	./build-fip.sh khadas-vim3 \
-	"${BINARIES_DIR}"/u-boot.bin \
-	"${FIP_DIR}")
-
-dd if="${FIP_DIR}"/u-boot.bin.sd.bin \
-   of="${BINARIES_DIR}"/sdcard.img \
-   conv=fsync,notrunc bs=1 count=444
-
-dd if="${FIP_DIR}"/u-boot.bin.sd.bin \
-   of="${BINARIES_DIR}"/sdcard.img \
-   conv=fsync,notrunc bs=512 skip=1 seek=1

board/khadas/vim3/readme.txt

@@ -1,71 +0,0 @@
-Khadas VIM3
-
-Description
-===========
-
-This configuration builds a complete image for the Khadas VIM3 to be flashed
-on an SD-card.
-
-How to build it
-===============
-
-Select the default configuration for the target:
-$ make khadas_vim3_defconfig
-
-Optional: modify the configuration:
-$ make menuconfig
-
-Build:
-$ make
-
-Result of the build
-===================
-output/images/
-+-- amlogic-boot-fip
-+   +-- build-fip.sh
-+   +-- g12a.inc
-+   `-- khadas-vim3
-+       +-- acs.bin
-+       +-- acs_tool.py
-+       +-- aml_ddr.fw
-+       +-- aml_encrypt_g12b
-+       +-- bl2.bin
-+       +-- bl301.bin
-+       +-- bl30.bin
-+       +-- bl31.bin
-+       +-- bl31.img
-+       +-- blx_fix.sh
-+       +-- ddr3_1d.fw
-+       +-- ddr4_1d.fw
-+       +-- ddr4_2d.fw
-+       +-- diag_lpddr4.fw
-+       +-- lpddr3_1d.fw
-+       +-- lpddr4_1d.fw
-+       +-- lpddr4_2d.fw
-+       +-- Makefile
-+       `-- piei.fw
-+-- boot.vfat
-+-- extlinux
-+   `-- extlinux.conf
-+-- fip
-+   +-- u-boot.bin
-+   +-- u-boot.bin.sd.bin
-+   +-- u-boot.bin.usb.bl2
-+   `-- u-boot.bin.usb.tpl
-+-- Image
-+-- meson-g12b-a311d-khadas-vim3.dtb
-+-- rootfs.ext2
-+-- rootfs.ext4 -> rootfs.ext2
-+-- rootfs.tar
-+-- sdcard.img
-`-- u-boot.bin
-
-The post-image script uses the files in the amlogic-boot-fip folder to sign
-the bootloader image before integrating it into the sdcard image.
-
-To copy the image file to the sdcard use dd:
-$ dd if=output/images/sdcard.img of=/dev/sdX
-
-Tested hardware
-===============
-Khadas vim3 (rev. 14)

board/licheepi/readme.txt

@@ -10,7 +10,7 @@ How to build it
 Configure Buildroot
 -------------------
 
-  $ make sipeed_licheepi_zero_defconfig
+  $ make licheepi_zero_defconfig
 
 Build the rootfs
 ----------------

board/microchip/mpfs_icicle/README.txt

@@ -1,62 +0,0 @@
-Microchip PolarFire SoC Icicle Kit
-==================================
-
-This file describes how to use the pre-defined Buildroot
-configuration for Microchip's PolarFire SoC Icicle Kit.
-
-Further information about the PolarFire SoC Icicle Kit can be found
-at https://github.com/polarfire-soc/polarfire-soc-documentation
-
-Building
-========
-
-Configure Buildroot using the default board configuration:
-
-  '$ make microchip_mpfs_icicle_defconfig'
-
-Customise the build as necessary:
-
-  '$ make menuconfig'
-
-Start the build:
-
-  '$ make'
-
-Result of the build
-===================
-
-Once the build has finished you will have the following files:
-
-    output/images/
-    +-- boot.scr
-    +-- boot.vfat
-    +-- Image
-    +-- mpfs_icicle.itb
-    +-- mpfs_icicle.its
-    +-- mpfs-icicle-kit.dtb
-    +-- payload.bin
-    +-- rootfs.ext2
-    +-- rootfs.ext4
-    +-- rootfs.tar
-    +-- sdcard.img
-    +-- u-boot.bin
-
-
-Creating a bootable SD card with genimage
-=========================================
-
-By default Buildroot builds a SD card image for you. The first partition
-of this image contains a U-Boot binary, embedded in a Hart Software
-Services (HSS) payload. The second partition contains a FAT filesystem
-with a U-Boot env and an ITB file containing the kernel and the device
-tree. The third partition contains the file system. This image can be
-written directly to the eMMC or an SD card. All you need to do is dd the
-image to the eMMC or your SD card, which can be done with the following
-command on your development host:
-
-  '$ sudo dd if=output/images/sdcard.img of=/dev/sdb bs=1M'
-
-For instructions on how to transfer the image to the eMMC/SD, please refer to
-the "Programming the Linux image" section of our guide on updating
-PolarFire SoC dev kits:
-https://github.com/polarfire-soc/polarfire-soc-documentation/blob/master/reference-designs-fpga-and-development-kits/updating-mpfs-kit.md.

board/microchip/mpfs_icicle/config.yaml

@@ -1,28 +0,0 @@
-#
-# HSS Payload Generator - buildroot configuration file
-#
-
-# First, we can optionally set a name for our image, otherwise one will be created dynamically
-set-name: 'PolarFire-SoC-HSS::U-Boot'
-
-#
-# Next, we'll define the entry point addresses for each hart, as follows:
-#
-hart-entry-points: {u54_1: '0x80200000', u54_2: '0x80200000', u54_3: '0x80200000', u54_4: '0x80200000'}
-#
-# Finally, we'll define a payloads (source binary file) that will be placed at certain regions in memory
-# The payload section is defined with the keyword payloads, and then a number of individual
-# payload descriptors.
-#
-# Each payload has a name (path to its ELF/bin file), an owner-hart, and optionally 1-3 secondary-harts.
-#
-# Additionally, it has a privilege mode in which it will start execution.
-#  * Valid privilege modes are PRV_M, PRV_S and PRV_U.
-#
-#
-# In this case, the only payload is the u-boot s-mode binary.
-#
-# Case only matters for the ELF path names, not the keywords.
-#
-payloads:
-  u-boot.bin: {exec-addr: '0x80200000', owner-hart: u54_1, secondary-hart: u54_2, secondary-hart: u54_3, secondary-hart: u54_4, priv-mode: prv_s}

board/microchip/mpfs_icicle/genimage.cfg

@@ -1,34 +0,0 @@
-# Image for eMMC or SDCard boot on the Microchip PolarFire SOC Icicle Board
-#
-image boot.vfat {
-	vfat {
-		files = {
-			 "mpfs_icicle.itb",
-		}
-
-		file boot.scr {
-			image = "boot.scr"
-		}
-	}
-	size = 60M
-}
-
-image sdcard.img {
-	hdimage {
-		gpt = true
-	}
-
-	partition uboot {
-		partition-type-uuid = 21686148-6449-6E6F-744E-656564454649
-		image = "payload.bin"
-	}
-
-	partition kernel {
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition root {
-		image = "rootfs.ext4"
-	}
-}

board/microchip/mpfs_icicle/linux.fragment

@@ -1 +0,0 @@
-CONFIG_POLARFIRE_SOC_DMA_NONCOHERENT=y

board/microchip/mpfs_icicle/mpfs_icicle.its

@@ -1,53 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Flattened Image Tree file for Icicle Kit
- *
- */
-
-/dts-v1/;
-
-/ {
-	description = "U-Boot fitImage for the MPFS";
-	address-cells = <1>;
-
-		images {
-			kernel {
-				description = "Linux kernel";
-				data = /incbin/("./Image");
-				type = "kernel";
-				arch = "riscv";
-				os = "linux";
-				compression = "none";
-				load = <0x80200000>;
-				entry = <0x80200000>;
-				hash-1 {
-					algo = "sha256";
-				};
-			};
-			base_fdt {
-				description = "Flattened Device Tree blob";
-				data = /incbin/("./mpfs-icicle-kit.dtb");
-				type = "flat_dt";
-				arch = "riscv";
-				compression = "none";
-				load = <0x8a000000>;
-				hash-1 {
-					algo = "sha256";
-				};
-			};
-		};
-
-		configurations {
-			default = "kernel_dtb";
-			kernel_dtb {
-				description = "1 Linux kernel, FDT blob";
-				kernel = "kernel";
-				fdt = "base_fdt";
-			};
-
-			base_dtb {
-				description = "Base FDT blob for MPFS Icicle board";
-				fdt = "base_fdt";
-			};
-		};
-};

board/microchip/mpfs_icicle/post-image.sh

@@ -1,13 +0,0 @@
-#!/bin/bash
-set -e
-
-HSS_PAYLOAD_GENERATOR="${HOST_DIR}"/bin/hss-payload-generator
-MKIMAGE="${HOST_DIR}"/bin/mkimage
-BOARD_DIR="$(pwd)"/"${0%/*}"
-
-pushd "${BINARIES_DIR}"
-"${HSS_PAYLOAD_GENERATOR}" -c "${BOARD_DIR}"/config.yaml payload.bin
-cp "${BOARD_DIR}"/mpfs_icicle.its "${BINARIES_DIR}"/mpfs_icicle.its
-"${MKIMAGE}" -f mpfs_icicle.its mpfs_icicle.itb
-popd
-support/scripts/genimage.sh -c "${BOARD_DIR}"/genimage.cfg

board/microchip/mpfs_icicle/uboot-env.txt

@@ -1,16 +0,0 @@
-# this assumes ${scriptaddr} is already set!!
-
-# Try to boot a fitImage from eMMC/SD
-
-setenv fdt_high 0xffffffffffffffff
-setenv initrd_high 0xffffffffffffffff
-
-load mmc 0:${distro_bootpart} ${scriptaddr} mpfs_icicle.itb;
-bootm start ${scriptaddr}#kernel_dtb;
-bootm loados ${scriptaddr};
-# Try to load a ramdisk if available inside fitImage
-bootm ramdisk;
-bootm prep;
-fdt set /soc/ethernet@20112000 mac-address ${icicle_mac_addr0};
-fdt set /soc/ethernet@20110000 mac-address ${icicle_mac_addr1};
-bootm go;

board/microchip/mpfs_icicle/uboot-fragment-rootfs.config

@@ -1,3 +0,0 @@
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="root=/dev/mmcblk0p3 rootwait uio_pdrv_genirq.of_id=generic-uio"
-CONFIG_MPFS_PRIORITISE_QSPI_BOOT=n

board/orangepi/orangepi-lite2/readme.txt

@@ -6,7 +6,7 @@ buildroot environment for the Orangepi Lite2. With the current configuration
 it will bring-up the board, and allow access through the serial console.
 
 Orangepi Lite2 link:
-http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Lite-2.html
+http://www.orangepi.org/Orange%20Pi%20Lite%202/
 
 Wiki link:
 https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+Lite2

board/orangepi/orangepi-one-plus/readme.txt

@@ -6,7 +6,7 @@ buildroot environment for the Orangepi One Plus. With the current configuration
 it will bring-up the board, and allow access through the serial console.
 
 Orangepi One Plus link:
-http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-One-Plus.html
+http://www.orangepi.org/OrangePiOneplus/
 
 Wiki link:
 https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+One+Plus

board/orangepi/orangepi-pc2/readme.txt

@@ -1,37 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Orangepi PC2. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-Orangepi PC2 link:
-http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-PC-2.html
-
-Sunxi Wiki link:
-https://linux-sunxi.org/Xunlong_Orange_Pi_PC_2
-
-This configuration uses U-Boot mainline and kernel mainline.
-
-How to build
-============
-
-    $ make orangepi_pc2_defconfig
-    $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
-  $ sudo sync
-
-Insert the micro SDcard in your Orangepi PC2 and power it up. The console
-is on the serial line, 115200 8N1.

board/orangepi/orangepi-zero-plus/readme.txt

@@ -6,7 +6,7 @@ buildroot environment for the Orangepi Zero Plus. With the current configuration
 it will bring-up the board, and allow access through the serial console.
 
 Orangepi Zero Plus link:
-http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-Plus.html
+http://www.orangepi.org/OrangePiZeroPlus/
 
 This configuration uses U-Boot mainline and kernel mainline.
 

board/orangepi/orangepi-zero-plus2/readme.txt

@@ -6,7 +6,7 @@ buildroot environment for the Orangepi Zero Plus2. With the current configuratio
 it will bring-up the board, and allow access through the serial console.
 
 Orangepi Zero Plus2 link:
-http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-Plus-2.html
+http://www.orangepi.org/OrangePiZeroPlus2/
 
 Wiki link:
 https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+Zero+Plus2

board/orangepi/orangepi-zero3/linux.config

@@ -1 +0,0 @@
-CONFIG_MFD_AC200=y

board/orangepi/orangepi-zero3/readme.txt

@@ -1,34 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Orangepi Zero3. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-Orangepi Zero3 link:
-http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-3.html
-
-This configuration uses Orangepi's fork of U-Boot and Linux kernel.
-
-How to build
-============
-
-    $ make orangepi_zero3_defconfig
-    $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
-  $ sudo sync
-
-Insert the micro SDcard in your Orangepi Zero3 and power it up. The console
-is on the serial line, 115200 8N1.

board/pine64/pinecube/extlinux.conf

@@ -1,4 +0,0 @@
-label buildroot
-  kernel /zImage
-  devicetree /sun8i-s3-pinecube.dtb
-  append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait rw

board/pine64/pinecube/post-build.sh

@@ -1,5 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname "$0")"
-
-install -m 0644 -D "$BOARD_DIR"/extlinux.conf "$BINARIES_DIR"/extlinux/extlinux.conf

board/pine64/pinecube/readme.txt

@@ -1,31 +0,0 @@
-Intro
-=====
-
-This directory contains a Buildroot configuration for building a
-Pine64 PineCube.
-
-Board homepage: https://www.pine64.org/cube/
-Board wiki:     https://wiki.pine64.org/wiki/PineCube
-
-How to build it
-===============
-
-  $ make pine64_pinecube_defconfig
-  $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
-  $ sudo sync
-
-Insert the micro SDcard in your PineCube and power it up. The console
-is on the serial port 2, 115200 8N1 (check Wiki for board pinout).

board/pine64/rockpro64/extlinux.conf

@@ -1,4 +1,4 @@
 label RK3399_ROCKPRO64 linux
   kernel /Image
   devicetree /rk3399-rockpro64.dtb
-  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p4 rw rootwait
+  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk0p4 rw rootwait

board/qemu/aarch64-ebbr/readme.txt

@@ -33,7 +33,7 @@ Run the emulation with:
       -device virtio-net-device,netdev=eth0 \
       -device virtio-rng-device,rng=rng0 \
       -drive file=output/images/disk.img,if=none,format=raw,id=hd0 \
-      -m 2048 \
+      -m 1024 \
       -netdev user,id=eth0 \
       -no-acpi \
       -nographic \
@@ -72,7 +72,7 @@ Then run the OS installer iso image on emulation with:
       -device virtio-rng-device,rng=rng0 \
       -drive file=<iso>,if=none,format=raw,readonly=on,id=hd0 \
       -drive file=disk.qcow2,if=none,id=hd1 \
-      -m 2048 \
+      -m 1024 \
       -netdev user,id=eth0 \
       -no-acpi \
       -nographic \
@@ -100,4 +100,4 @@ Firmware update is currently not supported.
 [1]: https://github.com/ARM-software/ebbr
 [2]: https://developer.arm.com/Architectures/Arm%20SystemReady%20IR
 [3]: https://github.com/ARM-software/arm-systemready/tree/main/IR/prebuilt_images
-[4]: https://developer.arm.com/documentation/DUI1101/latest/
+[4]: https://developer.arm.com/documentation/DUI1101/1-1/?lang=en

board/qemu/aarch64-virt/linux.config

@@ -12,7 +12,8 @@ CONFIG_SCHED_AUTOGROUP=y
 CONFIG_PROFILING=y
 CONFIG_ARCH_VEXPRESS=y
 CONFIG_COMPAT=y
-CONFIG_ACPI=y
+CONFIG_FW_CFG_SYSFS=y
+CONFIG_FW_CFG_SYSFS_CMDLINE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_BLK_DEV_BSGLIB=y
@@ -33,8 +34,6 @@ CONFIG_PCI=y
 CONFIG_PCI_HOST_GENERIC=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_FW_CFG_SYSFS=y
-CONFIG_FW_CFG_SYSFS_CMDLINE=y
 CONFIG_VIRTIO_BLK=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y

board/qemu/arm-ebbr/readme.txt

@@ -68,4 +68,4 @@ Firmware update is currently not supported.
 [1]: https://github.com/ARM-software/ebbr
 [2]: https://developer.arm.com/Architectures/Arm%20SystemReady%20IR
 [3]: https://github.com/ARM-software/arm-systemready/tree/main/IR/prebuilt_images
-[4]: https://developer.arm.com/documentation/DUI1101/latest/
+[4]: https://developer.arm.com/documentation/DUI1101/1-1/?lang=en

board/qemu/arm-vexpress-tz/readme.txt

@@ -62,7 +62,7 @@ consoles over telnet connections:
 	-serial telnet:127.0.0.1:1235,server \
 	-serial telnet:127.0.0.1:1236,server \
 	-netdev user,id=vmnic -device virtio-net-device,netdev=vmnic \
-	-semihosting-config enable=on,target=native \
+	-semihosting-config enable,target=native \
 	-bios flash.bin
 
 QEMU is now waiting for the telnet connection. From another shell, open a
@@ -91,7 +91,7 @@ From a first shell:
 	-smp 1 -s -m 1024 -d unimp \
 	-serial stdio \
 	-netdev user,id=vmnic -device virtio-net-device,netdev=vmnic \
-	-semihosting-config enable=on,target=native \
+	-semihosting-config enable,target=native \
 	-bios flash.bin \
 	-S
 
@@ -123,7 +123,7 @@ Emulation has started, TF-A has loaded OP-TEE and U-boot images in memory and
 has booted OP-TEE. Emulation stopped at OP-TEE core entry.
 
 Note: QEMU hosts a GDB service listening to TCP port 1234, as set through
-qemu-system-arm command line option -S.
+qemu-system-arm command line option -s.
 
 Note: To build the GDB server, the following extra options have to be added to
 the Buildroot configuration:

board/qemu/m68k-mcf5208/0001-m68k-Fix-invalid-.section-syntax.patch

@@ -1,97 +0,0 @@
-From 0bb6b7477f5dcfafbdd76eea9c7aa7a5f78d7613 Mon Sep 17 00:00:00 2001
-From: Ben Hutchings <benh@debian.org>
-Date: Fri, 16 Jun 2023 17:36:10 +0200
-Subject: [PATCH] m68k: Fix invalid .section syntax
-
-gas supports several different forms for .section for ELF targets,
-including:
-    .section NAME [, "FLAGS"[, @TYPE[,FLAG_SPECIFIC_ARGUMENTS]]]
-and:
-    .section "NAME"[, #FLAGS...]
-
-In several places we use a mix of these two forms:
-    .section NAME, #FLAGS...
-
-A current development snapshot of binutils (2.40.50.20230611) treats
-this mixed syntax as an error.
-
-Change to consistently use:
-    .section NAME, "FLAGS"
-as is used elsewhere in the kernel.
-
-Link: https://buildd.debian.org/status/fetch.php?pkg=linux&arch=m68k&ver=6.4%7Erc6-1%7Eexp1&stamp=1686907300&raw=1
-Signed-off-by: Ben Hutchings <benh@debian.org>
-Tested-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
-Link: https://lore.kernel.org/r/ZIyBaueWT9jnTwRC@decadent.org.uk
-Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
-Upstream: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=922a9bd138101e3e5718f0f4d40dba68ef89bb43
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
----
- arch/m68k/fpsp040/skeleton.S       | 4 ++--
- arch/m68k/ifpsp060/os.S            | 4 ++--
- arch/m68k/kernel/relocate_kernel.S | 4 ++--
- 3 files changed, 6 insertions(+), 6 deletions(-)
-
-diff --git a/arch/m68k/fpsp040/skeleton.S b/arch/m68k/fpsp040/skeleton.S
-index 439395aa6fb4..081922c72daa 100644
---- a/arch/m68k/fpsp040/skeleton.S
-+++ b/arch/m68k/fpsp040/skeleton.S
-@@ -499,13 +499,13 @@ in_ea:
- 	dbf	%d0,morein
- 	rts
- 
--	.section .fixup,#alloc,#execinstr
-+	.section .fixup,"ax"
- 	.even
- 1:
- 	jbsr	fpsp040_die
- 	jbra	.Lnotkern
- 
--	.section __ex_table,#alloc
-+	.section __ex_table,"a"
- 	.align	4
- 
- 	.long	in_ea,1b
-diff --git a/arch/m68k/ifpsp060/os.S b/arch/m68k/ifpsp060/os.S
-index 7a0d6e428066..89e2ec224ab6 100644
---- a/arch/m68k/ifpsp060/os.S
-+++ b/arch/m68k/ifpsp060/os.S
-@@ -379,11 +379,11 @@ _060_real_access:
- 
- 
- | Execption handling for movs access to illegal memory
--	.section .fixup,#alloc,#execinstr
-+	.section .fixup,"ax"
- 	.even
- 1:	moveq		#-1,%d1
- 	rts
--.section __ex_table,#alloc
-+.section __ex_table,"a"
- 	.align 4
- 	.long	dmrbuae,1b
- 	.long	dmrwuae,1b
-diff --git a/arch/m68k/kernel/relocate_kernel.S b/arch/m68k/kernel/relocate_kernel.S
-index ab0f1e7d4653..f7667079e08e 100644
---- a/arch/m68k/kernel/relocate_kernel.S
-+++ b/arch/m68k/kernel/relocate_kernel.S
-@@ -26,7 +26,7 @@ ENTRY(relocate_new_kernel)
- 	lea %pc@(.Lcopy),%a4
- 2:	addl #0x00000000,%a4		/* virt_to_phys() */
- 
--	.section ".m68k_fixup","aw"
-+	.section .m68k_fixup,"aw"
- 	.long M68K_FIXUP_MEMOFFSET, 2b+2
- 	.previous
- 
-@@ -49,7 +49,7 @@ ENTRY(relocate_new_kernel)
- 	lea %pc@(.Lcont040),%a4
- 5:	addl #0x00000000,%a4		/* virt_to_phys() */
- 
--	.section ".m68k_fixup","aw"
-+	.section .m68k_fixup,"aw"
- 	.long M68K_FIXUP_MEMOFFSET, 5b+2
- 	.previous
- 
--- 
-2.41.0
-

board/qemu/m68k-q800/0001-m68k-Fix-invalid-.section-syntax.patch

@@ -1,97 +0,0 @@
-From 0bb6b7477f5dcfafbdd76eea9c7aa7a5f78d7613 Mon Sep 17 00:00:00 2001
-From: Ben Hutchings <benh@debian.org>
-Date: Fri, 16 Jun 2023 17:36:10 +0200
-Subject: [PATCH] m68k: Fix invalid .section syntax
-
-gas supports several different forms for .section for ELF targets,
-including:
-    .section NAME [, "FLAGS"[, @TYPE[,FLAG_SPECIFIC_ARGUMENTS]]]
-and:
-    .section "NAME"[, #FLAGS...]
-
-In several places we use a mix of these two forms:
-    .section NAME, #FLAGS...
-
-A current development snapshot of binutils (2.40.50.20230611) treats
-this mixed syntax as an error.
-
-Change to consistently use:
-    .section NAME, "FLAGS"
-as is used elsewhere in the kernel.
-
-Link: https://buildd.debian.org/status/fetch.php?pkg=linux&arch=m68k&ver=6.4%7Erc6-1%7Eexp1&stamp=1686907300&raw=1
-Signed-off-by: Ben Hutchings <benh@debian.org>
-Tested-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
-Link: https://lore.kernel.org/r/ZIyBaueWT9jnTwRC@decadent.org.uk
-Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
-Upstream: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=922a9bd138101e3e5718f0f4d40dba68ef89bb43
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
----
- arch/m68k/fpsp040/skeleton.S       | 4 ++--
- arch/m68k/ifpsp060/os.S            | 4 ++--
- arch/m68k/kernel/relocate_kernel.S | 4 ++--
- 3 files changed, 6 insertions(+), 6 deletions(-)
-
-diff --git a/arch/m68k/fpsp040/skeleton.S b/arch/m68k/fpsp040/skeleton.S
-index 439395aa6fb4..081922c72daa 100644
---- a/arch/m68k/fpsp040/skeleton.S
-+++ b/arch/m68k/fpsp040/skeleton.S
-@@ -499,13 +499,13 @@ in_ea:
- 	dbf	%d0,morein
- 	rts
- 
--	.section .fixup,#alloc,#execinstr
-+	.section .fixup,"ax"
- 	.even
- 1:
- 	jbsr	fpsp040_die
- 	jbra	.Lnotkern
- 
--	.section __ex_table,#alloc
-+	.section __ex_table,"a"
- 	.align	4
- 
- 	.long	in_ea,1b
-diff --git a/arch/m68k/ifpsp060/os.S b/arch/m68k/ifpsp060/os.S
-index 7a0d6e428066..89e2ec224ab6 100644
---- a/arch/m68k/ifpsp060/os.S
-+++ b/arch/m68k/ifpsp060/os.S
-@@ -379,11 +379,11 @@ _060_real_access:
- 
- 
- | Execption handling for movs access to illegal memory
--	.section .fixup,#alloc,#execinstr
-+	.section .fixup,"ax"
- 	.even
- 1:	moveq		#-1,%d1
- 	rts
--.section __ex_table,#alloc
-+.section __ex_table,"a"
- 	.align 4
- 	.long	dmrbuae,1b
- 	.long	dmrwuae,1b
-diff --git a/arch/m68k/kernel/relocate_kernel.S b/arch/m68k/kernel/relocate_kernel.S
-index ab0f1e7d4653..f7667079e08e 100644
---- a/arch/m68k/kernel/relocate_kernel.S
-+++ b/arch/m68k/kernel/relocate_kernel.S
-@@ -26,7 +26,7 @@ ENTRY(relocate_new_kernel)
- 	lea %pc@(.Lcopy),%a4
- 2:	addl #0x00000000,%a4		/* virt_to_phys() */
- 
--	.section ".m68k_fixup","aw"
-+	.section .m68k_fixup,"aw"
- 	.long M68K_FIXUP_MEMOFFSET, 2b+2
- 	.previous
- 
-@@ -49,7 +49,7 @@ ENTRY(relocate_new_kernel)
- 	lea %pc@(.Lcont040),%a4
- 5:	addl #0x00000000,%a4		/* virt_to_phys() */
- 
--	.section ".m68k_fixup","aw"
-+	.section .m68k_fixup,"aw"
- 	.long M68K_FIXUP_MEMOFFSET, 5b+2
- 	.previous
- 
--- 
-2.41.0
-

board/qemu/or1k/readme.txt

@@ -3,3 +3,5 @@ Run the emulation with:
  qemu-system-or1k -kernel output/images/vmlinux -nographic # qemu_or1k_defconfig
 
 The login prompt will appear in the terminal that started Qemu.
+
+Ethernet support is not working, yet.

board/qemu/ppc64le-powernv8/readme.txt

@@ -1,5 +1,5 @@
 Run the emulation with:
 
-qemu-system-ppc64 -M powernv9 -kernel output/images/vmlinux -append "console=hvc0 rootwait root=/dev/nvme0n1" -device nvme,bus=pcie.3,addr=0x0,drive=drive0,serial=1234 -drive file=output/images/rootfs.ext2,if=none,id=drive0,format=raw,cache=none -device e1000e,netdev=net0,mac=C0:FF:EE:00:01:03,bus=pcie.1,addr=0x0  -netdev user,id=net0 -serial mon:stdio -nographic # qemu_ppc64le_powernv8_defconfig
+qemu-system-ppc64 -M powernv9 -kernel vmlinux -append "console=hvc0 rootwait root=/dev/nvme0n1" -device nvme,bus=pcie.3,addr=0x0,drive=drive0,serial=1234 -drive file=./rootfs.ext2,if=none,id=drive0,format=raw,cache=none -device e1000e,netdev=net0,mac=C0:FF:EE:00:01:03,bus=pcie.1,addr=0x0  -netdev user,id=net0 -serial mon:stdio -nographic # qemu_ppc64le_powernv8_defconfig
 
 The login prompt will appear in the terminal window.

board/radxa/rock5b/boot.cmd

@@ -1,3 +0,0 @@
-setenv bootargs root=/dev/mmcblk0p2 rw rootfstype=ext4 clkin_hz=(25000000) earlycon clk_ignore_unused earlyprintk console=ttyS2,1500000n8 rootwait
-fatload mmc 1:1 ${loadaddr} image.itb
-bootm ${loadaddr}

board/radxa/rock5b/genimage.cfg

@@ -1,34 +0,0 @@
-# SD card image for Radxa Rock 5b
-
-image boot.vfat {
-	vfat {
-		files = {
-			"image.itb",
-			"boot.scr"
-		}
-	}
-	size = 16M
-}
-
-image sdcard.img {
-	hdimage {
-		partition-table-type = "hybrid"
-	}
-
-	partition uboot {
-		in-partition-table = "false"
-		image = "u-boot-rockchip.bin"
-		offset = 32K
-	}
-
-	partition boot {
-		partition-type = "0xC"
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext2"
-	}
-}

board/radxa/rock5b/linux.fragment

@@ -1,4 +0,0 @@
-CONFIG_R8169=y
-# Disable Rockchip specific WiFi drivers, as the kernel
-# code cannot be build with GCC 12 due to several Werrors
-# CONFIG_WL_ROCKCHIP is not set

board/radxa/rock5b/patches/linux/0001-etherdevice-Adjust-ether_addr-prototypes-to-silence-.patch

@@ -1,64 +0,0 @@
-From 2618a0dae09ef37728dab89ff60418cbe25ae6bd Mon Sep 17 00:00:00 2001
-From: Kees Cook <keescook@chromium.org>
-Date: Sat, 12 Feb 2022 09:14:49 -0800
-Subject: etherdevice: Adjust ether_addr* prototypes to silence
- -Wstringop-overead
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-With GCC 12, -Wstringop-overread was warning about an implicit cast from
-char[6] to char[8]. However, the extra 2 bytes are always thrown away,
-alignment doesn't matter, and the risk of hitting the edge of unallocated
-memory has been accepted, so this prototype can just be converted to a
-regular char *. Silences:
-
-net/core/dev.c: In function ‘bpf_prog_run_generic_xdp’: net/core/dev.c:4618:21: warning: ‘ether_addr_equal_64bits’ reading 8 bytes from a region of size 6 [-Wstringop-overread]
- 4618 |         orig_host = ether_addr_equal_64bits(eth->h_dest, > skb->dev->dev_addr);
-      |                     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-net/core/dev.c:4618:21: note: referencing argument 1 of type ‘const u8[8]’ {aka ‘const unsigned char[8]’}
-net/core/dev.c:4618:21: note: referencing argument 2 of type ‘const u8[8]’ {aka ‘const unsigned char[8]’}
-In file included from net/core/dev.c:91: include/linux/etherdevice.h:375:20: note: in a call to function ‘ether_addr_equal_64bits’
-  375 | static inline bool ether_addr_equal_64bits(const u8 addr1[6+2],
-      |                    ^~~~~~~~~~~~~~~~~~~~~~~
-
-Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
-Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
-Link: https://lore.kernel.org/netdev/20220212090811.uuzk6d76agw2vv73@pengutronix.de
-Cc: Jakub Kicinski <kuba@kernel.org>
-Cc: "David S. Miller" <davem@davemloft.net>
-Cc: netdev@vger.kernel.org
-Signed-off-by: Kees Cook <keescook@chromium.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Upstream: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2618a0dae09ef37728dab89ff60418cbe25ae6bd
-Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
----
- include/linux/etherdevice.h | 5 ++---
- 1 file changed, 2 insertions(+), 3 deletions(-)
-
-diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
-index 2ad71cc90b37d..92b10e67d5f87 100644
---- a/include/linux/etherdevice.h
-+++ b/include/linux/etherdevice.h
-@@ -134,7 +134,7 @@ static inline bool is_multicast_ether_addr(const u8 *addr)
- #endif
- }
- 
--static inline bool is_multicast_ether_addr_64bits(const u8 addr[6+2])
-+static inline bool is_multicast_ether_addr_64bits(const u8 *addr)
- {
- #if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) && BITS_PER_LONG == 64
- #ifdef __BIG_ENDIAN
-@@ -372,8 +372,7 @@ static inline bool ether_addr_equal(const u8 *addr1, const u8 *addr2)
-  * Please note that alignment of addr1 & addr2 are only guaranteed to be 16 bits.
-  */
- 
--static inline bool ether_addr_equal_64bits(const u8 addr1[6+2],
--					   const u8 addr2[6+2])
-+static inline bool ether_addr_equal_64bits(const u8 *addr1, const u8 *addr2)
- {
- #if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) && BITS_PER_LONG == 64
- 	u64 fold = (*(const u64 *)addr1) ^ (*(const u64 *)addr2);
--- 
-cgit 
-

board/radxa/rock5b/patches/linux/0002-mm-page_alloc-fix-building-error-on-Werror-array-com.patch

@@ -1,43 +0,0 @@
-From ca831f29f8f25c97182e726429b38c0802200c8f Mon Sep 17 00:00:00 2001
-From: Xiongwei Song <sxwjean@gmail.com>
-Date: Fri, 14 Jan 2022 14:07:24 -0800
-Subject: mm: page_alloc: fix building error on -Werror=array-compare
-
-Arthur Marsh reported we would hit the error below when building kernel
-with gcc-12:
-
-  CC      mm/page_alloc.o
-  mm/page_alloc.c: In function `mem_init_print_info':
-  mm/page_alloc.c:8173:27: error: comparison between two arrays [-Werror=array-compare]
-   8173 |                 if (start <= pos && pos < end && size > adj) \
-        |
-
-In C++20, the comparision between arrays should be warned.
-
-Link: https://lkml.kernel.org/r/20211125130928.32465-1-sxwjean@me.com
-Signed-off-by: Xiongwei Song <sxwjean@gmail.com>
-Reported-by: Arthur Marsh <arthur.marsh@internode.on.net>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-Upstream: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ca831f29f8f25c97182e726429b38c0802200c8f
-Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
----
- mm/page_alloc.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/mm/page_alloc.c b/mm/page_alloc.c
-index 806f317c2e7e2..c4ef450ac4428 100644
---- a/mm/page_alloc.c
-+++ b/mm/page_alloc.c
-@@ -8228,7 +8228,7 @@ void __init mem_init_print_info(void)
- 	 */
- #define adj_init_size(start, end, size, pos, adj) \
- 	do { \
--		if (start <= pos && pos < end && size > adj) \
-+		if (&start[0] <= &pos[0] && &pos[0] < &end[0] && size > adj) \
- 			size -= adj; \
- 	} while (0)
- 
--- 
-cgit 
-

board/radxa/rock5b/post-image.sh

@@ -1,7 +0,0 @@
-#!/usr/bin/env bash
-set -e
-
-gzip -fk "${BINARIES_DIR}/Image"
-cp board/radxa/rock5b/rock5b.its "${BINARIES_DIR}"
-(cd "${BINARIES_DIR}" && mkimage -f rock5b.its image.itb)
-support/scripts/genimage.sh -c board/radxa/rock5b/genimage.cfg

board/radxa/rock5b/readme.txt

@@ -1,82 +0,0 @@
-RADXA ROCK 5B
-==============
-https://wiki.radxa.com/Rock5/hardware/5b
-
-Build:
-======
-  $ make rock5b_defconfig
-  $ make
-
-Files created in output directory
-=================================
-
-output/images
-.
-├── Image
-├── Image.gz
-├── boot.scr
-├── boot.vfat
-├── image.itb
-├── rk3588-rock-5b.dtb
-├── rk3588_bl31_v1.40.elf
-├── rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.12.bin
-├── rock5b.its
-├── rootfs.ext2
-├── rootfs.ext4
-├── rootfs.tar
-├── sdcard.img
-├── u-boot-rockchip.bin
-└── u-boot.bin
-
-Creating bootable SD card:
-==========================
-
-Simply invoke (as root)
-
-sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
-
-Where X is your SD card device.
-
-Booting:
-========
-
-Serial console:
----------------
-The Rock 5B has a 40-pin GPIO header. Its layout can be seen here:
-https://wiki.radxa.com/Rock5/hardware/5b/gpio
-
-The Uart pins are as follows:
-
-pin 6:  gnd
-pin 8:  tx
-pin 10: rx
-
-Baudrate for this board is 1500000.
-
-Login:
-------
-Enter 'root' as login user, and the prompt is ready.
-
-wiki link:
-----------
-https://forum.radxa.com/c/rock5
-
-Issues:
-=======
-
-The custom Radxa kernel provides custom code to support WiFi. However,
-that code does not compile with GCC 12, which is the current default
-version in buildroot. Hence, the WiFi kernel drivers are disabled, until
-the issues get fixed (if ever). If they are desperately needed, one may
-apply the following workaround, as long as buildroot still supports GCC
-version 11:
-
-1. Set GCC version 11, by adding the following line to
-configs/rock5b_defconfig:
-
-BR2_GCC_VERSION_11_X=y
-
-2. Re-enable custom WiFi drivers by removing the following line from
-board/radxa/rock5b/linux.fragment:
-
-# CONFIG_WL_ROCKCHIP is not set

board/radxa/rock5b/rock5b.its

@@ -1,46 +0,0 @@
-/dts-v1/;
-
-/ {
-	description = "Rock 5B FIT Image";
-	#address-cells = <1>;
-
-	images {
-		kernel {
-			description = "Kernel";
-			data = /incbin/("Image.gz");
-			type = "kernel";
-			arch = "arm64";
-			os = "linux";
-			compression = "gzip";
-			load = <0x0a200000>;
-			entry = <0x0a200000>;
-			hash {
-				algo = "sha256";
-			};
-		};
-		fdt {
-			description = "Device Tree";
-			data = /incbin/("rk3588-rock-5b.dtb");
-			type = "flat_dt";
-			arch = "arm64";
-			compression = "none";
-			load = <0x0e000000>;
-			entry = <0x0e000000>;
-			hash {
-				algo = "sha256";
-			};
-		};
-	};
-
-	configurations {
-		default = "standard";
-		standard {
-			description = "Standard Boot";
-			kernel = "kernel";
-			fdt = "fdt";
-			hash {
-				algo = "sha256";
-			};
-		};
-	};
-};

board/raspberrypi/genimage-raspberrypi.cfg

@@ -0,0 +1,33 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"bcm2708-rpi-b.dtb",
+			"bcm2708-rpi-b-plus.dtb",
+			"bcm2708-rpi-cm.dtb",
+			"rpi-firmware/bootcode.bin",
+			"rpi-firmware/cmdline.txt",
+			"rpi-firmware/config.txt",
+			"rpi-firmware/fixup.dat",
+			"rpi-firmware/start.elf",
+			"zImage"
+		}
+	}
+
+	size = 32M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}

board/raspberrypi/genimage-raspberrypi0.cfg

@@ -0,0 +1,32 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"bcm2708-rpi-zero.dtb",
+			"rpi-firmware/bootcode.bin",
+			"rpi-firmware/cmdline.txt",
+			"rpi-firmware/config.txt",
+			"rpi-firmware/fixup.dat",
+			"rpi-firmware/start.elf",
+			"rpi-firmware/overlays",
+			"zImage"
+		}
+	}
+
+	size = 32M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}

board/raspberrypi/genimage-raspberrypi0w.cfg

@@ -0,0 +1,32 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"bcm2708-rpi-zero-w.dtb",
+			"rpi-firmware/bootcode.bin",
+			"rpi-firmware/cmdline.txt",
+			"rpi-firmware/config.txt",
+			"rpi-firmware/fixup.dat",
+			"rpi-firmware/start.elf",
+			"rpi-firmware/overlays",
+			"zImage"
+		}
+	}
+
+	size = 32M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}

board/raspberrypi/genimage-raspberrypi2.cfg

@@ -0,0 +1,32 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"bcm2709-rpi-2-b.dtb",
+			"rpi-firmware/bootcode.bin",
+			"rpi-firmware/cmdline.txt",
+			"rpi-firmware/config.txt",
+			"rpi-firmware/fixup.dat",
+			"rpi-firmware/start.elf",
+			"rpi-firmware/overlays",
+			"zImage"
+		}
+	}
+
+	size = 32M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}

board/raspberrypi/genimage-raspberrypi3-64.cfg

@@ -0,0 +1,34 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"bcm2710-rpi-3-b.dtb",
+			"bcm2710-rpi-3-b-plus.dtb",
+			"bcm2837-rpi-3-b.dtb",
+			"rpi-firmware/bootcode.bin",
+			"rpi-firmware/cmdline.txt",
+			"rpi-firmware/config.txt",
+			"rpi-firmware/fixup.dat",
+			"rpi-firmware/start.elf",
+			"rpi-firmware/overlays",
+			"Image"
+		}
+	}
+
+	size = 32M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}

board/raspberrypi/genimage-raspberrypi3.cfg

@@ -0,0 +1,34 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"bcm2710-rpi-3-b.dtb",
+			"bcm2710-rpi-3-b-plus.dtb",
+			"bcm2710-rpi-cm3.dtb",
+			"rpi-firmware/bootcode.bin",
+			"rpi-firmware/cmdline.txt",
+			"rpi-firmware/config.txt",
+			"rpi-firmware/fixup.dat",
+			"rpi-firmware/start.elf",
+			"rpi-firmware/overlays",
+			"zImage"
+		}
+	}
+
+	size = 32M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}