Update for 2023.05.1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

.checkpackageignore

@@ -99,6 +99,8 @@ board/technologic/ts4900/post-image.sh Shellcheck
 board/toradex/apalis-imx6/post-image.sh Shellcheck
 board/udoo/common/post-build.sh Shellcheck
 board/udoo/mx6qdl/patches/linux/0000-udoo-disable-usbh1.patch Upstream
+board/versal/post-build.sh Shellcheck
+board/versal/post-image.sh Shellcheck TrailingSpace
 board/zynqmp/kria/patches/uboot/v1-0001-makefile-add-multi_dtb_fit-dep.patch ApplyOrder Upstream
 boot/afboot-stm32/0003-Makefile-disable-stack-protector.patch Upstream
 boot/at91bootstrap/0001-eabi-fix.patch Upstream
@@ -108,6 +110,11 @@ boot/at91dataflashboot/0001-do-not-install.patch Upstream
 boot/at91dataflashboot/0002-eabi-fixes.patch Upstream
 boot/grub2/0001-Makefile-Make-grub_fstest.pp-depend-on-config-util.h.patch Upstream
 boot/grub2/0002-grub-mkconfig-Restore-umask-for-the-grub.cfg.patch Upstream
+boot/lpc32xxcdl/0001-compiler_name.patch Upstream
+boot/lpc32xxcdl/0002-delete_redundant_files.patch Upstream
+boot/lpc32xxcdl/0003-libnosys_gnu.patch Upstream
+boot/lpc32xxcdl/0004-slashes.patch Upstream
+boot/mv-ddr-marvell/0001-Makefile-disable-stack-protection.patch Upstream
 boot/optee-os/3.13.0/0001-core-zlib-fix-build-warning-when-_LFS64_LARGEFILE-is.patch Upstream
 boot/syslinux/0001-bios-Fix-alignment-change-with-gcc-5.patch Upstream
 boot/syslinux/0002-Disable-PIE-to-avoid-FTBFS-on-amd64.patch Upstream
@@ -129,6 +136,7 @@ package/4th/0001-avoid-regen-during-install.patch Upstream
 package/ace/0001-ACE-ace-SSL-SSL_Asynch_BIO.cpp-fix-build-with-libres.patch Upstream
 package/ace/0002-ACE-ace-SSL-SSL_Asynch_BIO.cpp-fix-build-with-libres.patch Upstream
 package/acl/0001-Build-with-old-GCC-versions.patch Upstream
+package/acpica/0001-build-do-not-use-Werror.patch Upstream
 package/acpid/0001-dont-use-isfdtype.patch Upstream
 package/alchemy/0001-toolchains-remove-hash-style-management.patch Upstream
 package/alsamixergui/0001-misc-fixes.patch Sob Upstream
@@ -206,6 +214,18 @@ package/berkeleydb/0001-cwd-db_config.patch Upstream
 package/berkeleydb/0002-atomic_compare_exchange.patch Upstream
 package/bind/0001-cross.patch Upstream
 package/bind/S81named Indent Shellcheck Variables
+package/binutils/2.37/0001-sh-conf.patch Upstream
+package/binutils/2.37/0002-poison-system-directories.patch Upstream
+package/binutils/2.37/0003-bfd-elf32-or1k-fix-building-with-gcc-version-5.patch Upstream
+package/binutils/2.37/0004-or1k-fix-pc-relative-relocation-against-dynamic-on-P.patch Upstream
+package/binutils/2.37/0005-or1k-Avoid-R_OR1K_GOT16-signed-overflow-by-using-spe.patch Upstream
+package/binutils/2.37/0006-bfd-Close-the-file-descriptor-if-there-is-no-archive.patch Upstream
+package/binutils/2.37/0007-i386-Allow-GOT32-relocations-against-ABS-symbols.patch Upstream
+package/binutils/2.38/0001-sh-conf.patch Upstream
+package/binutils/2.38/0002-poison-system-directories.patch Upstream
+package/binutils/2.38/0003-bfd-elf32-or1k-fix-building-with-gcc-version-5.patch Upstream
+package/binutils/2.38/0004-or1k-Avoid-R_OR1K_GOT16-signed-overflow-by-using-spe.patch Upstream
+package/binutils/2.38/0005-binutils-2.38-vs.-ppc32-linux-kernel.patch Upstream
 package/binutils/2.39/0001-sh-conf.patch Upstream
 package/binutils/2.39/0002-poison-system-directories.patch Upstream
 package/binutils/2.39/0003-bfd-elf32-or1k-fix-building-with-gcc-version-5.patch Upstream
@@ -216,6 +236,7 @@ package/bmx7/0001-Fix-schedule.c-378-36-error-SIOCGSTAMP-undeclared.patch Upstre
 package/bmx7/0002-Fix-linking-error.patch Upstream
 package/bmx7/0003-Reorder-includes-to-avoid-ethhdr-collision.patch Upstream
 package/boinc/S99boinc-client Indent Shellcheck Variables
+package/bootgen/0001-Fix-build-on-machines-with-modern-flex.patch Upstream
 package/botan/0001-Add-superh-alias-needed-by-Debian.patch Upstream
 package/botan/0002-src-build-data-arch-superh.txt-add-sh4-eb-aeb.patch Upstream
 package/brickd/S70brickd Indent Shellcheck Variables
@@ -260,9 +281,13 @@ package/cgroupfs-mount/S30cgroupfs Indent Shellcheck Variables
 package/chipmunk/0001-Fix-build-failure-on-musl.patch Upstream
 package/chocolate-doom/0001-Remove-redundant-demoextend-definition.patch Upstream
 package/chrony/S49chrony Indent Shellcheck Variables
+package/clang/0001-lib-Driver-ToolChains-Gnu-Use-GCC_INSTALL_PREFIX-in-.patch Upstream
 package/cmake/0001-rename-cmake-rootfile.patch Upstream
 package/cmocka/0001-Don-t-redefine-uintptr_t.patch Upstream
 package/collectd/0001-src-netlink.c-remove-REG_NOERROR.patch Upstream
+package/connman/0001-gweb-Fix-OOB-write-in-received_data.patch Upstream
+package/connman/0002-wispr-Add-reference-counter-to-portal-context.patch Upstream
+package/connman/0003-wispr-Update-portal-context-references.patch Upstream
 package/connman/S45connman Variables
 package/copas/0001-Do-not-load-coxpcall-for-LuaJIT.patch Upstream
 package/coremark-pro/coremark-pro.sh.in Shellcheck
@@ -335,7 +360,7 @@ package/dmalloc/0004-Makefile-use-the-configure-detected-or-user-supplied.patch
 package/dmalloc/0005-configure-use-LD-instead-of-hard-coding-ld.patch Upstream
 package/dmraid/0001-fix-compilation-under-musl.patch Upstream
 package/dmraid/S20dmraid Variables
-package/dnsmasq/S80dnsmasq Shellcheck
+package/dnsmasq/S80dnsmasq Shellcheck Variables
 package/docker-engine/S60dockerd Indent Shellcheck Variables
 package/docopt-cpp/0001-only-build-one-target-use-BUILD_SHARED_LIBS-where-appropriate.patch Upstream
 package/domoticz/S99domoticz Shellcheck
@@ -361,6 +386,7 @@ package/dvblast/0002-fix-int-types.patch Upstream
 package/dvbsnoop/0001-musl-types-h.patch Upstream
 package/dvdrw-tools/0001-limits.h.patch Upstream
 package/dvdrw-tools/0002-Include-sysmacros.h-to-compile-with-newer-gcc.patch Upstream
+package/e2fsprogs/0001-libext2fs-add-sanity-check-to-extent-manipulation.patch Upstream
 package/earlyoom/0001-main.c-fix-build-with-kernel-4.3.patch Upstream
 package/earlyoom/S02earlyoom Indent Shellcheck
 package/ebtables/0001-replace-ebtables-save-perl-script-with-bash.patch Upstream
@@ -387,7 +413,7 @@ package/elf2flt/0002-elf2flt.ld-reinstate-32-byte-alignment-for-.data-sec.patch
 package/elf2flt/0003-elf2flt-add-riscv-64-bits-support.patch Upstream
 package/elf2flt/0004-elf2flt-create-a-common-helper-function.patch Upstream
 package/elf2flt/0005-elf2flt-fix-fatal-error-regression-on-m68k-xtensa-ri.patch Upstream
-package/elf2flt/0006-xtensa-fix-text-relocations.patch Upstream
+package/elf2flt/0006-elf2flt-xtensa-fix-text-relocations.patch Upstream
 package/elftosb/0001-fixes-includes.patch Upstream
 package/elftosb/0002-force-cxx-compiler.patch Upstream
 package/elfutils/0001-Add-a-enable-disable-progs-configure-option.patch Upstream
@@ -396,8 +422,12 @@ package/empty/0001-respect-LDFLAGS.patch Upstream
 package/erlang-p1-sip/0001-correct-include.patch Upstream
 package/erlang-p1-xmpp/0001-fix-includes.patch Upstream
 package/erlang-rebar/0001-src-rebar_port_compiler-add-fPIC-to-LDFLAGS-by-defau.patch Upstream
+package/erlang/0001-erts-ethread-instruct-libatomic_ops-we-do-require-CA.patch Upstream
+package/erlang/0002-erts-emulator-reorder-inclued-headers-paths.patch Upstream
+package/erlang/0003-crypto-Fixes-for-LibreSSL-3-5-0.patch Upstream
 package/espeak/0001-Fix-build-of-shared-library-on-architectures-needing.patch Upstream
 package/espeak/0002-tr_languages-cast-string_ordinal-init-values.patch Upstream
+package/eudev/0001-Only-use-pragma-for-ignoring-diagnostics-if-.patch Upstream
 package/eudev/S10udev ConsecutiveEmptyLines Indent Shellcheck Variables
 package/evemu/0001-Include-limits.h-for-PATH_MAX.patch Upstream
 package/evemu/0002-evemu-Update-struct-input_event.patch Upstream
@@ -415,6 +445,8 @@ package/exim/0009-Fix-non-WITH_CONTENT_SCAN-build-3.patch Upstream
 package/exim/S86exim Indent Variables
 package/expect/0001-enable-cross-compilation.patch Upstream
 package/expect/0002-allow-tcl-build-directory.patch Upstream
+package/f2fs-tools/0001-configure-ac-fix-cross-compilation.patch Upstream
+package/f2fs-tools/0002-f2fs-tools-fix-build-error-on-lz4-1-9-4.patch Upstream
 package/faifa/0001-sha2.c-explicitly-include-endian.h-for-BYTE_ORDER-ma.patch Upstream
 package/faifa/0002-hpav_cfg.c-do-not-include-linux-if_ether.h-for-musl-.patch Upstream
 package/faifa/0003-Makefile.in-fix-asbolute-symlink-of-libfaifa.so.patch Upstream
@@ -449,6 +481,9 @@ package/flex/0002-build-make-it-possible-to-disable-the-build-of-the-f.patch Ups
 package/flex/0003-build-make-it-possible-to-disable-the-build-of-the-d.patch Upstream
 package/flite/0001-fix-alsa-static.patch Upstream
 package/fltk/0001-disable-tests.patch Upstream
+package/fluent-bit/0001-lib-cfl-fixup-static_assert.patch Upstream
+package/fluent-bit/0002-lib-c-ares-fixup-static_assert.patch Upstream
+package/fluent-bit/0003-fix-build-without-C.patch Upstream
 package/fluxbox/0001-fixes-bug-1138.patch Upstream
 package/freeipmi/0001-add-disable-doc.patch Upstream
 package/freeradius-client/0001-fix-for-nettle.patch Upstream
@@ -472,10 +507,15 @@ package/fxload/0001-fix-static-build.patch Upstream
 package/gamin/0001-no-abstract-sockets.patch Upstream
 package/gamin/0002-no-const-return.patch Sob Upstream
 package/gamin/0003-fix-missing-PTHREAD_MUTEX_RECURSIVE_NP.patch Upstream
+package/gawk/0001-Fix-a-bug-with-Node_elem_new.patch Upstream
+package/gcc/10.4.0/0001-Revert-re-PR-target-92095-internal-error-with-O1-mcp.patch Upstream
+package/gcc/10.4.0/0002-or1k-Add-mcmodel-option-to-handle-large-GOTs.patch Upstream
+package/gcc/10.4.0/0003-or1k-Use-cmodel-large-when-building-crtstuff.patch Upstream
+package/gcc/10.4.0/0004-gcc-define-_REENTRANT-for-OpenRISC-when-pthread-is-p.patch Upstream
+package/gcc/10.4.0/0005-disable-split-stack-for-non-thread-builds.patch Upstream
 package/gcc/11.4.0/0001-or1k-Add-mcmodel-option-to-handle-large-GOTs.patch Upstream
 package/gcc/11.4.0/0004-disable-split-stack-for-non-thread-builds.patch Upstream
 package/gcc/12.3.0/0001-disable-split-stack-for-non-thread-builds.patch Upstream
-package/gcc/13.2.0/0001-disable-split-stack-for-non-thread-builds.patch Upstream
 package/gcc/8.4.0/0001-xtensa-fix-PR-target-91880.patch Upstream
 package/gcc/8.4.0/0002-Revert-re-PR-target-92095-internal-error-with-O1-mcp.patch Upstream
 package/gcc/8.4.0/0003-libsanitizer-Remove-cyclades-from-libsanitizer.patch Upstream
@@ -516,6 +556,7 @@ package/gengetopt/0001-configure.ac-add-disable-doc-option.patch Upstream
 package/genpart/0001-fix-return-code.patch Upstream
 package/genromfs/0001-build-system.patch Sob Upstream
 package/gensio/0001-Fix-missing-EVP_PKEY_ED25519-build-error-on-libressl.patch Upstream
+package/gerbera/0001-Fix-build-with-fmt-9-0.patch Upstream
 package/gerbera/S99gerbera Indent
 package/gettext-gnu/0001-error_print_progname.patch Upstream
 package/gettext-gnu/0002-restore-the-ability-to-buld-gettext-tools-seperately-part1.patch Upstream
@@ -530,6 +571,8 @@ package/gmp/0001-mpz-inp_raw.c-Avoid-bit-size-overflows.patch Upstream
 package/gnu-efi/0001-Make.defaults-don-t-override-ARCH-when-cross-compili.patch Upstream
 package/gnupg/0001-build-Always-use-EXTERN_UNLESS_MAIN_MODULE-pattern.patch Upstream
 package/gnuplot/0001-configure-add-without-demo-option.patch Upstream
+package/gnuradio/0001-blocks-Including-missing-vector-in-blockinterleaver.patch Upstream
+package/gnuradio/0002-blocks-blockinterleaving.h-add-missing-cstddef-heade.patch Upstream
 package/go/0001-build.go-explicit-option-for-crosscompilation.patch Upstream
 package/gob2/0001-dont-include-from-prefix.patch Upstream
 package/gobject-introspection/0001-disable-tests.patch Upstream
@@ -563,6 +606,7 @@ package/haveged/S21haveged Shellcheck Variables
 package/heirloom-mailx/0001-fix-libressl-support.patch Upstream
 package/highway/0001-Fix-compilation-for-armv7-with-gcc-8.patch Upstream
 package/highway/0002-Fix-compilation-for-armv7-targets-with-vfp-v4-and-gc.patch Upstream
+package/hiredis/0001-CMakeLists.txt-respect-BUILD_SHARED_LIBS.patch Upstream
 package/hplip/0001-build-use-pkg-config-to-discover-libusb.patch Upstream
 package/hplip/0002-configure.in-fix-AM_INIT_AUTOMAKE-call.patch Upstream
 package/htpdate/S43htpdate Shellcheck
@@ -623,6 +667,7 @@ package/irrlicht/0002-makefile-override-LDFLAGS-and-remove-obsolete-X11R6-.patch
 package/iucode-tool/S00iucode-tool Variables
 package/iwd/S40iwd Shellcheck Variables
 package/jack2/0001-Remove-usage-of-U-mode-bit-for-opening-files-in-pyth.patch Upstream
+package/janet/0001-Update-for-more-minimal-builds.patch Upstream
 package/janus-gateway/0001-disable-ssp.patch Upstream
 package/janus-gateway/0002-Add-test-for-Wunused-but-set-variable.patch Upstream
 package/jose/0001-lib-hsh.c-rename-hsh-local-variable.patch Upstream
@@ -643,6 +688,7 @@ package/lcdproc/0001-LCDd.conf.patch Upstream
 package/lcdproc/0002-Add-missing-ioctl-header.patch Upstream
 package/lcdproc/0003-Fixcompilation-with-GCC-10-x.patch Upstream
 package/leafnode2/0001-cross_makefile.patch Upstream
+package/less/0001-End-OSC8-hyperlink-on-invalid-embedded-escape-sequence.patch Upstream
 package/let-me-create/0001-fix-build-with-musl-C-library.patch Upstream
 package/leveldb/0001-Fix-compilation-with-g-4.8.2.patch Upstream
 package/leveldb/0002-CMake-install-libmemenv.a.patch Upstream
@@ -653,19 +699,25 @@ package/libabseil-cpp/0001-force-position-independent-code.patch Upstream
 package/libarchive/0001-autotools-do-not-add-iconv-for-Requires.private.patch Upstream
 package/libargon2/0001-libargon2-dont-fail-on-existing-symlink.patch Upstream
 package/libart/0001-art-config-cross.patch Sob Upstream
+package/libasplib/0001-asplib_CPUTimer.h-Fix-time.h-include.patch Upstream
 package/libatasmart/0001-strpool-cross-flags.patch Upstream
 package/libavl/0001-fix-makefile.patch Upstream
 package/libb64/0001-Integer-overflows.patch Upstream
 package/libb64/0002-Initialize-C++-objects.patch Upstream
 package/libblockdev/0001-Provide-replacement-function-for-strerror_l.patch Upstream
+package/libbsd/0001-src-local-elf.h-fix-big-endian-sh.patch Upstream
 package/libcdaudio/0001-libcdaudio-enable-autoreconf.patch Upstream
 package/libcec/0001-cecloader-h-fix-null-return.patch Upstream
 package/libcgi/0001-CMakeLists.txt-honour-BUILD_TESTING.patch Upstream
 package/libcgicc/0001-disable-documentation-option.patch Sob Upstream
+package/libclc/0001-support-out-of-tree-build.patch Upstream
+package/libcodec2/0001-update-cmake.patch Upstream
 package/libconfuse/0001-Fix-163-unterminated-username-used-with-getpwnam.patch Upstream
 package/libcorrect/0002-CMakeLists.txt-conditionally-use-fsanitize-address.patch Upstream
 package/libcuefile/0001-fix-static-link.patch Upstream
 package/libdaemon/0001-testd-use-unistd-h-instead-of-sys-unistd-h.patch Upstream
+package/libdeflate/0001-lib-arm-crc32-use-crypto-target-when-required-due-to-gcc-bug.patch Upstream
+package/libdeflate/0002-lib-arm-cpu_features-fix-build-error-due-to-PMULL-enabled-without-NEON.patch Upstream
 package/libdnet/0001-python-makefile.patch Upstream
 package/libdnet/0002-Correct-path-to-string-h-from-bsd.patch Upstream
 package/libdrm/0001-tests-meson.build-disable-nouveau-tests-for-static-b.patch Upstream
@@ -691,6 +743,7 @@ package/libftdi1/0002-CMakeLists.txt-fix-paths-when-FTDIPP-is-set.patch Upstream
 package/libftdi1/0003-CMakeLists.txt-fix-static-build-with-libusb-and-lato.patch Upstream
 package/libfuse/0001-fix-aarch64-build.patch Upstream
 package/libfuse/0002-util-ulockmgr_server-c-conditionally-define-closefrom-fix-glibc-2-34.patch Upstream
+package/libfuse3/0001-Fix-MS_LAZYTIME-not-defined-on-uclibc.patch Upstream
 package/libgcrypt/0001-configure.ac-add-an-option-to-disable-tests.patch Upstream
 package/libgdiplus/0001-Build-unit-tests-only-when-enable-unit-tests-is-pass.patch Upstream
 package/libglfw/0001-Wayland-Remove-extra-cmake-modules-dependency.patch Upstream
@@ -728,6 +781,11 @@ package/libloki/0002-use-ln-snf.patch Upstream
 package/libmad/0001-mips-h-constraint-removal.patch Sob Upstream
 package/libmad/0002-configure-ac-automake-foreign.patch Upstream
 package/libmanette/0001-Meson-Un-hardcode-building-a-shared-library.patch Upstream
+package/libmemcached/0001-disable-tests.patch Upstream
+package/libmemcached/0002-disable-sanitizer.patch Upstream
+package/libmemcached/0003-move-ac_config_aux_dir.patch Upstream
+package/libmemcached/0004-disable-doc-and-man.patch Upstream
+package/libmemcached/0005-fix-pointer-comparaison.patch Upstream
 package/libmng/0001-jpeg-9a.patch Upstream
 package/libmodsecurity/0001-configure.ac-drop-usage-of-git-at-configure-time.patch Upstream
 package/libmodsecurity/0002-modsecurity.pc.in-add-lstdc.patch Upstream
@@ -749,6 +807,9 @@ package/libodb-mysql/0002-mariadb-FTBFS-fix.patch Upstream
 package/libopenssl/0001-Dont-waste-time-building-manpages-if-we-re-not-going.patch Upstream
 package/libopenssl/0002-Reproducible-build-do-not-leak-compiler-path.patch Upstream
 package/libopenssl/0004-Configure-use-ELFv2-ABI-on-some-ppc64-big-endian-sys.patch Upstream
+package/libopenssl/0005-crypto-perlasm-ppc-xlate.pl-add-linux64v2-flavour.patch Upstream
+package/libopenssl/0006-Add-support-for-io_pgetevents_time64-syscall.patch Upstream
+package/libopenssl/0007-Fixup-support-for-io_pgetevents_time64-syscall.patch Upstream
 package/liboping/0001-fix-utf8-support.patch Upstream
 package/liboping/0002-Open-raw-sockets-when-adding-hosts-not-when-doing-th.patch Upstream
 package/liboping/0003-Fix-compile-break-with-GCC-7-buffer-overflow-with-snprintf.patch Upstream
@@ -789,6 +850,7 @@ package/libspatialindex/0001-allow-building-static-libs.patch Upstream
 package/libspatialindex/0002-CMakeLists.txt-fix-CMAKE_BUILD_TYPE.patch Upstream
 package/libsquish/0001-Makefile-add-f-option-for-ln-to-remove-existing-dest.patch Upstream
 package/libsrtp/0001-Remove-compatibility-code-for-legacy-OpenSSL-to-fix-LibreSSL-build.patch Upstream
+package/libssh2/0001-Opaque-structs-in-LibreSSL-3-5.patch Upstream
 package/libsvg/0001-fix-expat-static-declaration.patch Upstream
 package/libsvg/0002-Fix-undefined-symbol-png_set_gray_1_2_4_to_8.patch Upstream
 package/libsvgtiny/0001-disable-debug-printfs.patch Upstream
@@ -821,6 +883,7 @@ package/libwebsock/0002-fix-ssl.patch Upstream
 package/libwebsock/0003-fix-incorrect-inline.patch Upstream
 package/libwebsockets/0001-lib-tls-CMakeLists.txt-fix-build-without-threads.patch Upstream
 package/libyuv/0001-i386-sse2.patch Upstream
+package/lightning/0001-lib-jit_disasm.c-fix-build.patch Upstream
 package/lighttpd/0001-Modify-the-default-lighttpd-configuration-file-to-ha.patch Upstream
 package/lighttpd/S50lighttpd EmptyLastLine Indent Shellcheck Variables
 package/linknx/0001-configure-ac-tweak-CPPUNIT-conditional.patch Upstream
@@ -833,6 +896,8 @@ package/linux-fusion/0004-Port-one-one_udp.c-to-Linux-4.1.patch Upstream
 package/linux-tools/S10hyperv Variables
 package/linux-zigbee/0001-test-serial-Remove-test-serial.patch Upstream
 package/linux-zigbee/0002-addrdb-coord-config-parse.y-add-missing-time.h-inclu.patch Upstream
+package/linuxptp/0001-missing.h-drop-clock_nanosleep-replacement.patch Upstream
+package/linuxptp/0002-makefile-use-conditional-assignment-for-KBUILD_OUTPUT.patch Upstream
 package/linuxptp/S65ptp4l Indent Shellcheck
 package/linuxptp/S66phc2sys Indent Shellcheck
 package/lirc-tools/0001-plugins-devinput.c-fix-build-with-musl-1.2.0.patch Upstream
@@ -843,8 +908,7 @@ package/lite/0002-no-tests.patch Sob Upstream
 package/lite/0003-pkg-config.patch Sob Upstream
 package/live555/0001-Add-a-pkg-config-file-for-the-shared-libraries.patch Upstream
 package/lldpd/S60lldpd Indent Shellcheck Variables
-package/llvm-project/clang/0001-lib-Driver-ToolChains-Gnu-Use-GCC_INSTALL_PREFIX-in-.patch Upstream
-package/llvm-project/libclc/0001-support-out-of-tree-build.patch Upstream
+package/llvm/0001-nfc-Fix-missing-include.patch Upstream
 package/lm-sensors/0001-static-build.patch Upstream
 package/lm-sensors/0002-no-host-ldconfig.patch Upstream
 package/lmbench/0001-scripts-build-use-bin-bash-as-shell.patch Upstream
@@ -895,8 +959,11 @@ package/madplay/0001-switch-to-new-alsa-api.patch Sob Upstream
 package/madplay/0002-configure-ac-automake-foreign.patch Upstream
 package/madplay/0003-configure-ac-use-pkg-config-to-find-id3tag.patch Upstream
 package/madplay/0004-configure-ac-call-AM_MKINSTALLDIRS.patch Upstream
+package/make/0001-configure.ac-Support-GLIBC-glob-interface-version-2.patch Upstream
+package/make/0001-glob-Do-not-assume-glibc-glob-internals.patch Upstream
 package/makedumpfile/0002-Handle-__mips64.patch Upstream
 package/mariadb/0001-add-extra-check-for-librt.patch Upstream
+package/mariadb/0002-include-ssl_compat.h-fix-build-with-libressl-3.5.0.patch Upstream
 package/mariadb/S97mysqld Indent Shellcheck Variables
 package/matchbox-keyboard/mb-applet-kbd-wrapper.sh Shellcheck TrailingSpace
 package/matchbox-lib/0001-index-is-legacy.patch Upstream
@@ -906,6 +973,7 @@ package/matchbox-panel/0003-mb-applet-battery.patch Upstream
 package/matchbox-startup-monitor/0001-true-false.patch Upstream
 package/matchbox/0001-defaulttheme.patch Upstream
 package/matchbox/0002-src-Fix-build-with-gcc-10.patch Upstream
+package/mbw/0001-CMakeLists.txt-fix-build-without-C.patch Upstream
 package/mediastreamer/0001-src-videofilters-nowebcam.c-fix-build-without-ffmpeg.patch Upstream
 package/mediastreamer/0002-Use-AV_INPUT_BUFFER_PADDING_SIZE-to-determine-paddin.patch Upstream
 package/memcached/0001-logger.c-initialize-rport.patch Upstream
@@ -959,6 +1027,7 @@ package/musepack/0004-missing-sys-select.patch Upstream
 package/musepack/0005-fix-build-with-gcc-10.patch Upstream
 package/musl/0001-avoid-kernel-if_ether.h.patch Upstream
 package/musl/0002-package-musl-Make-scheduler-functions-Linux-compatib.patch Upstream
+package/musl/0003-fix-incorrect-parameter-name-in-internal-netlink.h-R.patch Upstream
 package/nano/0001-lib-getrandom.c-fix-build-with-uclibc-1.0.35.patch Upstream
 package/nanocom/0001-fix-build-with-gcc-10.patch Upstream
 package/ncftp/0001-fix-gcc-10.patch Upstream
@@ -1019,6 +1088,8 @@ package/norm/0003-Fix-mixed-tabs-spaces-in-protolib-wscript.patch Upstream
 package/nss-pam-ldapd/S45nslcd EmptyLastLine Indent Shellcheck Variables
 package/ntp/0001-nano.patch Upstream
 package/ntp/0002-ntp-syscalls-fallback.patch Upstream
+package/ntp/0003-override-shell.patch Upstream
+package/ntp/0004-libntp-Do-not-use-PTHREAD_STACK_MIN-on-glibc.patch Upstream
 package/ntp/S49ntp.in Variables
 package/ntpsec/0001-wscript-remove-checks-for-bsd-string.h-fixes-host-co.patch Upstream
 package/ntpsec/0002-wscript-fix-build-without-stack-protector.patch Upstream
@@ -1051,6 +1122,7 @@ package/olsr/S50olsr Indent Shellcheck Variables
 package/omxplayer/0001-Update-Makefile-to-be-compatible-with-buildroot.patch Upstream
 package/open-iscsi/0001-SHA3-is-not-supported-by-libressl.patch Upstream
 package/open-plc-utils/0001-Remove-OWNER-and-GROUPS-parameters-to-install.patch Upstream
+package/open-plc-utils/0002-plc-plc.h-fix-build-with-gcc-10.patch Upstream
 package/open2300/0001-fix-makefile.patch Upstream
 package/openjdk/17.0.7+7/0001-Add-ARCv2-ISA-processors-support-to-Zero.patch Upstream
 package/openldap/0001-fix_cross_strip.patch Upstream
@@ -1071,6 +1143,8 @@ package/openrc/0003-init.d-agetty-replace-sbin-agetty-by-sbin-getty.patch Upstre
 package/openrc/0004-init.d-agetty-start-agetty-after-all-sevices.patch Upstream
 package/openrc/0005-runlevels-do-not-add-agetty.tty-1-6-if-MKSYSVINIT-ye.patch Upstream
 package/openrc/0006-Also-create-run-lock-subsys-directory.patch Upstream
+package/opensc/0002-added-compatibility-with-LibreSSL.patch Upstream
+package/opensc/0003-Fix-build-with-libressl-3.5.0.patch Upstream
 package/openssh/S50sshd EmptyLastLine Indent Variables
 package/openswan/0001-lib-libopenswan-constants.c-workaround-missing-ns_t_.patch Upstream
 package/opentyrian/0001-Move-definitions-that-don-t-need-to-be-exposed-from-opl-h-to-opl-c.patch Upstream
@@ -1146,11 +1220,14 @@ package/pkcs11-helper/0001-openssl-libressl-3-5-0-does-not-have-DSA_meth_set1_na
 package/pkgconf/0001-Only-prefix-with-the-sysroot-a-subset-of-variables.patch Upstream
 package/pkgconf/0002-Revert-main-assume-modversion-insted-of-version-if-o.patch Upstream
 package/pkgconf/pkg-config.in Shellcheck
+package/poco/0001-Fix-optional-JSON-support-for-MySQL-3753.patch Sob Upstream
 package/poke/0001-configure.ac-HELP2MAN-replace-by-true-when-cross-com.patch Upstream
 package/poke/0002-lib-getrandom.c-fix-build-with-uclibc-1.0.35.patch Upstream
 package/policycoreutils/0001-Add-DESTDIR-to-all-paths-that-use-an-absolute-path.patch Upstream
 package/policycoreutils/0002-Add-PREFIX-to-host-paths.patch Upstream
 package/postgresql/S50postgresql Variables
+package/pound/0001-fix-openssl-1.0.2.patch Upstream
+package/pound/0002-fix-openssl-1.1.0.patch Upstream
 package/powertop/0001-dont-force-stack-smashing-protection.patch Upstream
 package/pppd/0001-pppd-Fix-compilation-with-older-glibc-or-kernel-headers.patch Upstream
 package/pppd/0002-pppd-eap-tls.c-fix-build-with-libressl.patch Upstream
@@ -1182,6 +1259,7 @@ package/pulseaudio/S50pulseaudio ConsecutiveEmptyLines EmptyLastLine Indent Vari
 package/pulseview/0001-Replace-obsolete-deprecated-Qt-methods.patch Upstream
 package/pulseview/0002-Fix-broken-build-due-to-C-template-behind-C-linkage.patch Upstream
 package/pulseview/0003-Support-glibmm-2.68.patch Upstream
+package/putty/0001-unix-uxutils.h-fix-build-on-uclibc.patch Upstream
 package/python-aiohttp-remotes/0001-Fix-flit_core-build-requires-backend.patch Upstream
 package/python-automat/0001-Remove-uneeded-dependency-to-wheel.patch Upstream
 package/python-crossbar/0001-Avoid-intentional-syntax-error.patch Upstream
@@ -1189,6 +1267,7 @@ package/python-crossbar/0002-requirements-min.txt-drop-indirect-dependencies.pat
 package/python-crossbar/0003-crossbar-webservice-wap-use-markupsafe-instead-of-we.patch Upstream
 package/python-daphne/0001-remove-pytest-runner-requirement.patch Upstream
 package/python-dnspython/0001-Remove-spurious-wheel-build-dependency.patch Upstream
+package/python-hiredis/0001-setup.py-fix-build-with-gcc-4.8.patch Upstream
 package/python-m2crypto/0001-Mitigate-the-Bleichenbacher-timing-attacks-in-the-RSA-decryption-API-CVE-2020-25657.patch Upstream
 package/python-pybind/0001-pybind11-commands.py-support-STAGING_DIR.patch Upstream
 package/python-pylibftdi/0001-do-not-use-find-library.patch Upstream
@@ -1250,6 +1329,7 @@ package/qt5/qt5enginio/0001-Do-not-use-deprecated-QLinkedList.patch Upstream
 package/qt5/qt5location/0001-3rdparty-mapbox-gl-native-fix-musl-compile-pthread_g.patch Upstream
 package/qt5/qt5script/0001-Detect-32-bits-armv8-a-architecture.patch Upstream
 package/qt5/qt5tools/0001-Disable-designer-tool-fixes-configure-error.patch Upstream
+package/qt5/qt5wayland/0001-Add-missing-define-guards.patch Upstream
 package/qt5/qt5webengine-chromium/0001-Add-python3-build-support.patch Upstream
 package/qt5/qt5webengine-chromium/0002-Don-t-rebase-sysroot-path.patch Upstream
 package/qt5/qt5webengine/0001-gn.pro-don-t-link-statically-with-libstc.patch Upstream
@@ -1268,6 +1348,8 @@ package/quotatool/0001-fix-missing-__P-definition-for-musl-compile.patch Upstrea
 package/racehound/0001-Fix-module-install-path-lib-instead-of-usr-lib-prefi.patch Upstream
 package/ranger/0001-colorscheme-check-for-compiled-python-files.patch Upstream
 package/rapidxml/0001-ensure-internal-print-operations-are-declared-before.patch Upstream
+package/raptor/0002-Calcualte-max-nspace-declarations-correctly-for-XML-.patch Upstream
+package/raptor/0003-XML-Writer-compare-namespace-declarations-correctly.patch Upstream
 package/raspberrypi-usbboot/0001-Makefile-allow-passing-CFLAGS-LDFLAGS.patch Upstream
 package/rdesktop/0001-8bit-colors.patch Sob Upstream
 package/read-edid/0001-Fix-install-file-list.patch Upstream
@@ -1278,6 +1360,7 @@ package/redis/0001-uclibc.patch Upstream
 package/redis/0002-largefile-conditional-define.patch Upstream
 package/redis/0003-redis.conf-adjust-defauts-for-buildroot.patch Upstream
 package/redis/S50redis Shellcheck Variables
+package/resiprocate/0001-Fix-some-issue-compiling-with-Visual-Studio.patch Upstream
 package/restorecond/S02restorecond Shellcheck
 package/ripgrep/0001-puts-jemalloc-allocator-behind-a-cargo-feature-flag.patch Upstream
 package/riscv-isa-sim/0001-riscv-disable-precompiled-headers.patch Upstream
@@ -1295,6 +1378,7 @@ package/rpi-userland/0006-interface-vcos-pthreads-CMakeLists.txt-fix-build-wit.p
 package/rpi-userland/0007-GLES2-gl2ext.h-add-GLint64-GLuint64-and-GLsync-typed.patch Upstream
 package/rt-tests/0001-Fix-a-build-issue-with-uClibc-ng.patch Upstream
 package/rt-tests/0002-Makefile-drop-explicit-undefine-PYLIB-for-compatibil.patch Upstream
+package/rtl8192eu/0002-Fix-conflicting-get_ra-on-PowerPC.patch Upstream
 package/rtl_433/0001-CMakeLists.txt-use-pkg-config-to-detect-openssl-when.patch Upstream
 package/rtl_433/0002-minor-Fix-mongoose-build-without-threads.patch Upstream
 package/rtmpdump/0001-include-limits.h.patch Upstream
@@ -1314,12 +1398,12 @@ package/samba4/0002-build-find-pre-built-heimdal-build-tools-in-case-of-.patch U
 package/samba4/0003-ldap_message_test.c-include-stdint.h-before-cmoka.h.patch Upstream
 package/samba4/S91smb Indent Shellcheck Variables
 package/sane-backends/0001-sane_backend-add-missing-config.h.patch Upstream
-package/screen/0001-Do-not-use-memcpy-as-an-alternative-for-bcopy-memmov.patch Upstream
-package/screen/0002-Do-not-create-backup-of-old-installed-binary.patch Upstream
-package/screen/0003-Change-binary-permission-flags-even-if-chown-fails.patch Upstream
-package/screen/0004-Support-overriding-SCREEN-to-get-a-non-versioned-bin.patch Upstream
-package/screen/0005-Renamed-sched.h-to-eventqueue.h.patch Upstream
-package/screen/0006-comm.h-now-depends-on-term.h.patch Upstream
+package/screen/0001-no-memcpy-fallback.patch Upstream
+package/screen/0002-install-no-backup-binary.patch Upstream
+package/screen/0003-install-always-chmod.patch Upstream
+package/screen/0004-install-nonversioned-binary.patch Upstream
+package/screen/0005-rename-sched_h.patch Upstream
+package/screen/0006-comm-h-now-depends-on-term-h.patch Upstream
 package/screen/0007-comm.h-needed-for-list_-display-generic-.o.patch Upstream
 package/scrub/0001-configure-ac-make-sure-m4-macros-are-included-in-the-build.patch Upstream
 package/sdl/0001-use-correct-directfb-config.patch Upstream
@@ -1397,6 +1481,7 @@ package/sslh/S35sslh Indent Shellcheck Variables
 package/start-stop-daemon/0001-add-uclibc-alias-and-musl.patch Upstream
 package/start-stop-daemon/0002-just-warn-on-missing-arch.patch Upstream
 package/statserial/0001-ncurses-link.patch Upstream
+package/stellarium/0001-add-missing-include.patch Upstream
 package/stunnel/S50stunnel Indent Shellcheck Variables
 package/sudo/0001-configure.ac-fix-openssl-static-build.patch Upstream
 package/supervisor/S99supervisord Variables
@@ -1405,6 +1490,7 @@ package/suricata/0002-configure.ac-allow-the-user-to-override-RUST_TARGET.patch
 package/suricata/S99suricata Shellcheck
 package/swupdate/swupdate.sh Shellcheck
 package/sylpheed/0001-harden-link-checker-before-accepting-click.patch Upstream
+package/syslog-ng/0001-fix-build-on-uclibc.patch Upstream
 package/sysprof/0001-define-NT_GNU_BUILD_ID.patch Upstream
 package/sysrepo/S51sysrepo-plugind Indent Shellcheck
 package/system-config-printer/0001-Add-option-to-disable-xmlto-manual-generation.patch Upstream
@@ -1439,6 +1525,7 @@ package/tinyxml/0001-In-stamp-always-advance-the-pointer-if-p-0xef.patch Upstrea
 package/tor/0001-patch-src_lib_crypt_ops_crypto_dh_openssl_c.patch Upstream
 package/tor/0002-patch-src_lib_crypt_ops_crypto_rsa_openssl_c.patch Upstream
 package/tor/0003-patch-src_lib_tls_x509_openssl_c.patch Upstream
+package/tovid/0001-manpage.patch Upstream
 package/tpm2-abrmd/S80tpm2-abrmd Indent Shellcheck Variables
 package/tpm2-tss/0001-Temporary-fix-for-build-without-C.patch Upstream
 package/transmission/S92transmission ConsecutiveEmptyLines Indent Shellcheck Variables
@@ -1481,6 +1568,7 @@ package/ushare/0001-Don-t-build-po-files-if-NLS-is-disabled.patch Upstream
 package/ussp-push/0001-fix-build-against-bluez-4.patch Upstream
 package/ussp-push/0002-fix-build-again-obex-bluez.patch Upstream
 package/ussp-push/0003-add-OBEX_CharToUnicode.patch Upstream
+package/util-linux/0001-lsns-improve-dependence-on-NS_GET_-ioctls.patch Upstream
 package/vala/0001-dont-add-dirty-to-valac-version.patch Upstream
 package/vala/vala-wrapper Shellcheck
 package/valgrind/0001-workaround-SIGSEGV-on-PPC.patch Upstream
@@ -1534,7 +1622,9 @@ package/wampcc/0002-include-wampcc-platform.h-fix-build-with-musl-1.2.0.patch Up
 package/wampcc/0003-Broken-build-on-Windows.patch Upstream
 package/watchdogd/S01watchdogd Indent NotExecutable
 package/wavemon/0001-iw_if.h-don-t-include-linux-if.h.patch Upstream
+package/wayland-utils/0001-wayland-info-Fix-build-without-libdrm.patch Upstream
 package/webrtc-audio-processing/0001-Proper-detection-of-cxxabi.h-and-execinfo.h.patch Upstream
+package/weston/0001-tests-Add-dependency-on-screenshooter-client-protocol.patch Upstream
 package/wget/0001-lib-getrandom.c-fix-build-with-uclibc-1.0.35.patch Upstream
 package/wilc-driver/0001-cfg80211.c-fix-missing-prandom_u32-with-Linux-6.1.0.patch Upstream
 package/wilc-driver/0002-spi.c-fix-build-failure-on-remove-callback.patch Upstream
@@ -1593,6 +1683,7 @@ package/xinetd/0004-configure-rlim_t.patch Upstream
 package/xinetd/0005-CVE-2013-4342-xinetd-ignores-user-and-group-directiv.patch Upstream
 package/xl2tp/xl2tpd TrailingSpace
 package/xml-security-c/0001-fix-build-with-libressl-3.5.0.patch Upstream
+package/xvisor/0001-psmouse-back.c-fix-build-with-gcc-11.patch Upstream
 package/xxhash/0001-fix-man-page-installation.patch Upstream
 package/xxhash/0002-Makefile-add-dedicated-install-targets.patch Upstream
 package/xxhash/0003-do-no-longer-depend-on-assert-h-for-XXH_STATIC_ASSERT.patch Upstream
@@ -1618,6 +1709,9 @@ package/zip/0005-unix-configure-remove-GID-UID-size-check.patch Upstream
 package/zip/0006-unix-configure-borrow-the-LFS-test-from-autotools.patch Upstream
 package/zip/0007-timezone.c-needs-time.h-fixes-musl-compile.patch Upstream
 package/zip/0008-fix-musl-static-build.patch Upstream
+package/zlib-ng/0001-Use-static-keyword-for-vec_sumsu-to-prevent-undefine.patch Upstream
+package/zlib-ng/0002-CMakeLists.txt-fix-version-in-zlib.pc-when-building-.patch Upstream
+package/zlib-ng/0003-zlib-ng-check-that-sys-auxv.h-exists-at-configure-time.patch Upstream
 package/zmqpp/0001-Allow-building-shared-or-static-library-only.patch Upstream
 package/znc/0001-LibreSSL-3.5-opaqued-structures.patch Upstream
 package/znc/0002-Fix-build-with-libressl.patch Upstream

.gitlab-ci.yml

@@ -10,11 +10,6 @@ stages:
 generate-gitlab-ci-yml:
   stage: generate-gitlab-ci
   script: ./support/scripts/generate-gitlab-ci-yml support/misc/gitlab-ci.yml.in > generated-gitlab-ci.yml
-  retry:
-    max: 2
-    when:
-      - runner_system_failure
-      - stuck_or_timeout_failure
   artifacts:
     when: always
     paths:

CHANGES

@@ -1,85 +1,3 @@
-2023.08-rc3, released August 29th, 2023
-
-	Fixes all over the tree.
-
-	Defconfigs: Avenger96: Bump ATF to 2.9 to fix build warnings
-	with binutils >= 2.39. CI20: Bump kernel to 5.4.254 to fix
-	build issue with GCC 12. Hifive unleashed: Add missing
-	pylibfdt dependency / bump kernel to 5.10.109 to fix build
-	issue GCC 12. PC x86-64 bios/elf: Add missing libelf
-	dependency. Sipeed maix sdcard: Fix build issues with
-	binutils >= 2.38
-
-	Updated/fixed packages: check, clamav, cups, esp-hosted,
-	f2fs-tools, freeswitch, gcc, gmp, libks, libmodsecurity,
-	mosquitto, mpg123, network-manager, php, postgresql, python3,
-	ramspeed, rtl8189fs, rust, rust-bin, samba4, screen, zlib-ng
-
-2023.08-rc2, released August 20th, 2023
-
-	Fixes all over the tree.
-
-	Toolchains: Only show external toolchains based on a GCC
-	version supporting the selected architecture
-	variant. Correctly mark Codescape MIPS external toolchains as
-	not providing a gdbserver.
-
-	Defconfigs: Andes ae350_45: Drop custom U-Boot march setting,
-	breaking builds with GCC 12. Nitrogen*: Bump
-	U-Boot/Linux. Nitrogen8*: Use ATF 2.8, fixing array bounds
-	errors. QEMU m68k: Add Linux patch to fix build issue with
-	binutils >= 2.41. Raspberrypi*: Enable console on HDMI when
-	using systemd as well.
-
-	Updated/fixed packages: at91dataflashboot, aubio, berkeleydb,
-	bwm-ng, ccache, check, chocolate-doom, compiler-rt, composer,
-	conmon, connman, dav1d, diffutils, dracut, e2fsprogs, elf2flt,
-	esp-hosted, flite, gcc, gdb, go-bootstrap-stage2,
-	intel-microcode, kodi-imagedecoder-heif, less, libcoap,
-	libedit, libglib2, libksba, liblo, libserial, log4cxx, lsof,
-	luvi, meson, mosquitto, mpd, mpv, mv-ddr-marvell, nftables,
-	ntpsec, openssh, optee-test, perftest, python-botocore,
-	python-docker, python-pylibfdt, python3, screenfetch,
-	sentry-cli, sngrep, stellarium, trinity, tvheadend, uboot,
-	uclibc, util-linux, xfsprogs, yajl
-
-	New packages: nftables-python, xlib_libXpresent
-
-	Removed packages: lpc32xxcdl
-
-2023.08-rc1, released August 5, 2023
-
-	Numerous package updates and fixes, additional runtime tests.
-
-	Toolchain:
-	- Toolchains from ARM (for ARM, AArch64 and AArch64 BE)
-          updated to 12.2.
-	- Support for binutils 2.40 and 2.41 added, binutils 2.37 and
-          2.38 removed, binutils 2.40 is now the default
-	- Support for gcc 13 added, gcc 10 removed, gcc 12 is now the
-          default
-
-	Architectures:
-	- Additional x86-64 variants added
-	- RISC-V vector extension support added
-
-	Infrastructure:
-	- Go now built in 3 stages to be able to update to Go 1.20.x.
-
-	New defconfigs: rock5b
-
-	Removed defconfigs: qemu_sparc_ss10
-
-	New packages: composer, conmon, dfu-programmer, esp-hosted,
-	kodi-imagedecoder-heif, kodi-imagedecoder-raw, libde2654,
-	libdisplay-info, libheif, llvm-cmake, llvm-libunwind,
-	lua-dkjson, mbpoll, mdnsd, mhz, opencsd, python-libconf,
-	python-blinker, python-midiutil, python-rdps-py, python-wheel,
-	qt6svg, redis-plus-plus, rockchip-rkbin, rtl8822cs, swaybg,
-	swugenerator
-
-	Removed packages: libasplib, ocf-linux, tovid
-
 2023.05.1, released July 17th, 2023
 
 	Important / security related fixes.
@@ -185,70 +103,6 @@
 	#15376: Libiconv config
 	#15461: QtVirtualKeyboard segfaults
 
-2023.02.3, released July 17th, 2023
-
-	Important / security related fixes.
-
-	Defconfigs: Chiliboard: fix build on hosts without openssl
-	development headers.
-	Nitrogen*: fix build on hosts without openssl or pylibfdt.
-	Raspberrypi: Handle DTB overlays for all variants
-
-	Updated/fixed packages: agentpp, alsa-plugins, assimp, bind,
-	busybox, dbus, c-ares, check, dav1d, fluidsynth, fftw, fwts,
-	ghostscript, gnupg2, gnuradio, gupnp, haproxy, heimdal,
-	hwdata, jhead, libcap, libgcrypt, libgpg-error, libgtk3,
-	libxslt, mesa3d-demos, mpir, nodejs, php, pkgconf,
-	python-cryptography, python-dbus-fast, python-django,
-	python-pyicu, python-requests, python3, qt6, quickjs,
-	sconeserver, taglib, tiff, wireshark, xdriver_xf86-video-dummy
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#15643: ERROR: No hash found for linux-6.3.8.tar.xz
-	#15673: PKGCONF_SITE in pkgconf.mk points to parked domain
-	#15682: pkgconf: no longer able to download source from...
-
-2023.02.2, released June 16th, 2023
-
-	Important / security related fixes.
-
-	Infrastructure: Add BR2_HOST_CMAKE_AT_LEAST_* for packages
-	needing a newer host-cmake than what is currently enforced
-	(3.18) - Up to the version provided by the cmake package (3.22).
-
-	utils/docker-run: Now correctly handles git
-	workdirs/worktrees.
-
-	Defconfigs: QEMU s390x: Bump rootfs size to make room for
-	kernel modules, Stm32f4xx: Tweak config to save RAM, Xilinx
-	Versal vck190: Use correct (A72) CPU variant
-
-	Updated/fixed packages: atkmm, bird, busybox, cairomm1_14,
-	cmake, containerd, crudini, cups, delve, docker-cli,
-	docker-engine, earlyoom, edid-decode, fluent-bit, freeswitch,
-	gcc, gdb, glibmm_2_66, gnupg2, go, gptfdisk, graphicsmagick,
-	intel-microcode, libass, libcurl, libdeflate, libgeos,
-	libgtk3, libjxl, libnftl, libopenssl, libressl, libssh, llvm,
-	lua, mesa3d, micropython, minidlna, moby-buildkit, mpd, mupdf,
-	ncurses, nftables, openjdk, openjdk-bin, php, postgresql,
-	python-can, python-django, python-django, python-ipython,
-	python-matplotlib, python-mupdf, python-requests, python3,
-	qemu, redis, rpm, runc, sdl2_mixer, tzdata, uclibc, vdr,
-	wilc-firmware, xapp_xcalc, xapp_xdpyinfo, xapp_xinput,
-	xapp_xwininfo, xdata_xbitmaps, xdata_xcursor-themes,
-	xdriver_xf86-input-mouse, xdriver_xf86-video-ark,
-	xdriver_xf86-video-geode, xdriver_xf86-video-neomagic,
-	xfont_encodings, xlib_libX11, xlib_libXaw, xlib_libXi,
-	xlib_libXfixes, xlib_libXft, xlib_libXpm, zfs, znc
-
-	New packages: perl-clone, perl-http-message, python-asttokens,
-	python-executing, python-pure-eval, python-stack-data
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#15421: qemu_aarch64_ebbr_defconfig: Missing Linux kernel source code
-
 2023.02.1, released May 9th, 2023
 
 	Important / security related fixes.

Config.in

@@ -65,7 +65,7 @@ config BR2_NEEDS_HOST_JAVA
 
 # Hidden boolean selected by pre-built packages for x86, when they
 # need to run on x86-64 machines (example: pre-built external
-# toolchains, binary tools, etc.).
+# toolchains, binary tools like SAM-BA, etc.).
 config BR2_HOSTARCH_NEEDS_IA32_LIBS
 	bool
 

Config.in.legacy

@@ -144,58 +144,6 @@ endif
 
 ###############################################################################
 
-comment "Legacy options removed in 2023.08"
-
-config BR2_TARGET_LPC32XXCDL
-	bool "lpc32xxcdl has been removed"
-	select BR2_LEGACY
-	help
-	  lpc32xxcdl has been removed, due to licensing concerns.
-
-config BR2_BINUTILS_VERSION_2_38_X
-	bool "binutils 2.38.x has been removed"
-	select BR2_LEGACY
-	help
-	  binutils 2.38 has been removed, use a newer version.
-
-config BR2_GCC_VERSION_10_X
-	bool "gcc 10.x support removed"
-	select BR2_LEGACY
-	help
-	  Support for gcc version 10.x has been removed. The current
-	  default version (12.x or later) has been selected instead.
-
-config BR2_KERNEL_HEADERS_6_3
-	bool "kernel headers version 6.3.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 6.3.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_PACKAGE_TOVID
-	bool "tovid removed"
-	select BR2_LEGACY
-	help
-	  tovid was removed
-
-config BR2_PACKAGE_LIBASPLIB
-	bool "libasplib removed"
-	select BR2_LEGACY
-	help
-	  libasplib is no longer needed.
-
-config BR2_PACKAGE_OCF_LINUX
-	bool "ocf-linux has been removed"
-	select BR2_LEGACY
-	help
-	  ocf-linux is incompatible with newer kernels.
-
-config BR2_BINUTILS_VERSION_2_37_X
-	bool "binutils 2.37.x has been removed"
-	select BR2_LEGACY
-	help
-	  binutils 2.37 has been removed, use a newer version.
-
 comment "Legacy options removed in 2023.05"
 
 config BR2_KERNEL_HEADERS_6_2

DEVELOPERS

@@ -321,19 +321,19 @@ F:	package/apr-util/
 F:	package/bcg729/
 F:	package/bento4/
 F:	package/bitcoin/
+F:	package/bluez-tools/
+F:	package/boinc/
 F:	package/clamav/
 F:	package/dav1d/
 F:	package/dht/
 F:	package/dovecot/
 F:	package/dovecot-pigeonhole/
 F:	package/dtv-scan-tables/
-F:	package/ethtool/
 F:	package/eudev/
 F:	package/exim/
 F:	package/fetchmail/
 F:	package/ffmpeg/
 F:	package/flac/
-F:	package/flatbuffers/
 F:	package/freeswitch/
 F:	package/freeswitch-mod-bcg729/
 F:	package/freetype/
@@ -341,10 +341,13 @@ F:	package/fstrcmp/
 F:	package/ghostscript/
 F:	package/giflib/
 F:	package/gkrellm/
+F:	package/gli/
+F:	package/glmark2/
 F:	package/gpsd/
 F:	package/gptfdisk/
-F:	package/hddtemp/
 F:	package/hdparm/
+F:	package/hddtemp/
+F:	package/inih/
 F:	package/intel-gmmlib/
 F:	package/intel-mediadriver/
 F:	package/intel-mediasdk/
@@ -352,21 +355,18 @@ F:	package/intel-microcode/
 F:	package/jsoncpp/
 F:	package/kodi*
 F:	package/lame/
-F:	package/lcms2/
 F:	package/leafnode2/
 F:	package/libaacs/
+F:	package/libasplib/
 F:	package/libass/
 F:	package/libbdplus/
 F:	package/libbluray/
 F:	package/libbroadvoice/
-F:	package/libcap/
 F:	package/libcdio/
 F:	package/libcec/
 F:	package/libcodec2/
 F:	package/libcrossguid/
-F:	package/libde265/
 F:	package/libdeflate/
-F:	package/libdisplay-info/
 F:	package/libdrm/
 F:	package/libdvbcsa/
 F:	package/libdvdcss/
@@ -374,13 +374,11 @@ F:	package/libdvdnav/
 F:	package/libdvdread/
 F:	package/libebur128/
 F:	package/libfreeglut/
-F:	package/libfribidi/
 F:	package/libg7221/
 F:	package/libglew/
 F:	package/libglfw/
 F:	package/libglu/
 F:	package/libhdhomerun/
-F:	package/libheif/
 F:	package/libilbc/
 F:	package/libks/
 F:	package/libldns/
@@ -398,27 +396,21 @@ F:	package/libsidplay2/
 F:	package/libsilk/
 F:	package/libsndfile/
 F:	package/libsoundtouch/
+F:	package/libsquish/
 F:	package/libudfread/
 F:	package/libunibreak/
 F:	package/liburiparser/
 F:	package/libutp/
-F:	package/libuv/
 F:	package/libva/
 F:	package/libva-intel-driver/
 F:	package/libva-utils/
 F:	package/libvorbis/
 F:	package/libvpx/
 F:	package/libyuv/
-F:	package/linux-firmware/
-F:	package/mc/
 F:	package/mesa3d/
 F:	package/minidlna/
 F:	package/mjpg-streamer/
-F:	package/mpg123/
-F:	package/ntp/
 F:	package/nut/
-F:	package/opus/
-F:	package/pciutils/
 F:	package/perl-crypt-openssl-guess/
 F:	package/perl-crypt-openssl-random/
 F:	package/perl-crypt-openssl-rsa/
@@ -437,34 +429,33 @@ F:	package/perl-io-html/
 F:	package/perl-lwp-mediatypes/
 F:	package/perl-mail-dkim/
 F:	package/perl-mailtools/
-F:	package/perl-netaddr-ip/
 F:	package/perl-net-dns/
 F:	package/perl-net-http/
+F:	package/perl-netaddr-ip/
 F:	package/perl-timedate/
 F:	package/perl-uri/
 F:	package/perl-www-robotrules/
 F:	package/php/
+F:	package/pixman/
 F:	package/pngquant/
-F:	package/pppd/
-F:	package/privoxy/
+F:	package/pound/
 F:	package/pure-ftpd/
 F:	package/python-couchdb/
 F:	package/python-cssutils/
 F:	package/python-glslang/
-F:	package/python-mako/
 F:	package/python-mwclient/
 F:	package/python-mwscrape/
 F:	package/python-mwscrape2slob/
+F:	package/python-mako/
 F:	package/python-oauthlib/
 F:	package/python-pyicu/
 F:	package/python-pylru/
 F:	package/python-requests-oauthlib/
 F:	package/python-slob/
-F:	package/rrdtool/
 F:	package/rsync/
 F:	package/rtmpdump/
 F:	package/samba4/
-F:	package/sofia-sip/
+F:	package/softether/
 F:	package/spandsp/
 F:	package/sqlite/
 F:	package/stellarium/
@@ -474,10 +465,12 @@ F:	package/tor/
 F:	package/transmission/
 F:	package/tvheadend/
 F:	package/unixodbc/
+F:	package/utf8proc/
+F:	package/vdr/
+F:	package/vdr-plugin-vnsiserver/
 F:	package/vlc/
-F:	package/wget/
-F:	package/wireless-regdb/
-F:	package/wireless_tools/
+F:	package/vnstat/
+F:	package/waylandpp/
 F:	package/x264/
 F:	package/x265/
 F:	package/xmrig/
@@ -549,7 +542,6 @@ F:	package/balena-engine/
 F:	package/batman-adv/
 F:	package/catatonit/
 F:	package/cni-plugins/
-F:	package/conmon/
 F:	package/containerd/
 F:	package/crun/
 F:	package/delve/
@@ -559,8 +551,6 @@ F:	package/docker-engine/
 F:	package/embiggen-disk/
 F:	package/fuse-overlayfs/
 F:	package/go/
-F:	package/go-bootstrap-stage1/
-F:	package/go-bootstrap-stage2/
 F:	package/gocryptfs/
 F:	package/mbpfan/
 F:	package/moby-buildkit/
@@ -652,7 +642,7 @@ F:	package/odroidc2-firmware/
 N:	Daniel J. Leach <dleach@belcan.com>
 F:	package/dacapo/
 
-N:	Daniel Lang <dalang@gmx.at>
+N:	Daniel Lang <d.lang@abatec.at>
 F:	package/atkmm/
 F:	package/atkmm2_28/
 F:	package/cairomm/
@@ -663,11 +653,9 @@ F:	package/glibmm2_66/
 F:	package/gtkmm3/
 F:	package/libsigc/
 F:	package/libsigc2/
-F:	package/llvm-project/
 F:	package/paho-mqtt-cpp/
 F:	package/pangomm/
 F:	package/pangomm2_46/
-F:	package/sam-ba/
 
 N:	Damien Lanson <damien@kal-host.com>
 F:	package/libvdpau/
@@ -1025,7 +1013,6 @@ F:	package/tinycbor/
 F:	package/tinydtls/
 F:	package/tinymembench/
 F:	package/whois/
-F:	package/x11r7/xlib_libXpresent/
 F:	package/zeek/
 
 N:	Fabrice Goucem <fabrice.goucem@oss.nxp.com>
@@ -1175,7 +1162,6 @@ F:	package/at/
 F:	package/binutils/
 F:	package/cryptsetup/
 F:	package/erlang-jiffy/
-F:	package/esp-hosted/
 F:	package/gcc/
 F:	package/harfbuzz/
 F:	package/libfuse3/
@@ -1185,7 +1171,6 @@ F:	package/mali-driver/
 F:	package/minicom/
 F:	package/mmc-utils/
 F:	package/nfs-utils/
-F:	package/python-libconf/
 F:	package/python-uvloop/
 F:	package/qt5/
 F:	package/rockchip-mali/
@@ -1200,7 +1185,6 @@ F:	package/rtl8821cu/
 F:	package/sunxi-mali-utgard/
 F:	package/sunxi-mali-utgard-driver/
 F:	package/sunxi-tools/
-F:	package/swugenerator/
 F:	package/trace-cmd/
 F:	package/udisks/
 F:	package/wilc-driver/
@@ -1431,7 +1415,6 @@ F:	package/python-pydyf/
 F:	package/python-pypa-build/
 F:	package/python-pyphen/
 F:	package/python-pyproject-hooks/
-F:	package/python-rpds-py/
 F:	package/python-rtoml/
 F:	package/python-selenium/
 F:	package/python-snappy/
@@ -1467,7 +1450,6 @@ F:	package/gtkmm3/
 F:	package/libpqxx/
 F:	package/pangomm/
 F:	package/rpm/
-F:	package/swaybg/
 F:	package/yad/
 
 N:	Jan Heylen <jan.heylen@nokia.com>
@@ -1542,7 +1524,6 @@ F:	package/libnet/
 F:	package/libteam/
 F:	package/libuev/
 F:	package/mg/
-F:	package/mdnsd/
 F:	package/mini-snmpd/
 F:	package/mrouted/
 F:	package/netcalc/
@@ -1612,9 +1593,6 @@ N:	John Faith <jfaith@impinj.com>
 F:	package/python-inflection/
 F:	package/sdbusplus/
 
-N:	Jon Ringle <jringle@gridpoint.com>
-F:	package/mbpoll/
-
 N:	Jonathan Ben Avraham <yba@tkos.co.il>
 F:	arch/Config.in.xtensa
 F:	package/autofs/
@@ -1642,12 +1620,12 @@ F:	support/testing/tests/package/test_zfs.py
 
 N:	Joseph Kogut <joseph.kogut@gmail.com>
 F:	package/at-spi2-core/
+F:	package/clang/
 F:	package/earlyoom/
 F:	package/gconf/
 F:	package/libnss/
-F:	package/llvm-project/clang/
-F:	package/llvm-project/lld/
-F:	package/llvm-project/llvm/
+F:	package/lld/
+F:	package/llvm/
 F:	package/python-cython/
 F:	package/python-pycups/
 F:	package/python-raven/
@@ -1721,7 +1699,6 @@ F:	package/libjxl/
 F:	package/octave/
 F:	package/ola/
 F:	package/openblas/
-F:	package/opencsd/
 F:	package/openmpi/
 F:	package/perftest/
 F:	package/ptm2human/
@@ -1732,7 +1709,6 @@ F:	package/python-hwdata/
 F:	package/python-magic-wormhole/
 F:	package/python-magic-wormhole-mailbox-server/
 F:	package/python-magic-wormhole-transit-relay/
-F:	package/python-midiutil/
 F:	package/python-pyalsa/
 F:	package/python-spake2/
 F:	package/rdma-core/
@@ -1743,63 +1719,37 @@ F:	package/zynaddsubfx/
 F:	support/testing/tests/package/sample_python_distro.py
 F:	support/testing/tests/package/sample_python_gnupg.py
 F:	support/testing/tests/package/sample_python_hwdata.py
-F:	support/testing/tests/package/sample_python_midiutil.py
 F:	support/testing/tests/package/sample_python_pyalsa.py
 F:	support/testing/tests/package/sample_python_spake2.py
-F:	support/testing/tests/package/test_acpica.py
-F:	support/testing/tests/package/test_acpica/
-F:	support/testing/tests/package/test_brotli.py
-F:	support/testing/tests/package/test_bzip2.py
-F:	support/testing/tests/package/test_compressor_base.py
 F:	support/testing/tests/package/test_ddrescue.py
 F:	support/testing/tests/package/test_ddrescue/
-F:	support/testing/tests/package/test_dos2unix.py
-F:	support/testing/tests/package/test_fluidsynth.py
-F:	support/testing/tests/package/test_fluidsynth/
-F:	support/testing/tests/package/test_gawk.py
-F:	support/testing/tests/package/test_glslsandbox_player.py
-F:	support/testing/tests/package/test_glslsandbox_player/
 F:	support/testing/tests/package/test_gnupg2.py
-F:	support/testing/tests/package/test_gnuradio.py
-F:	support/testing/tests/package/test_gnuradio/
-F:	support/testing/tests/package/test_gzip.py
 F:	support/testing/tests/package/test_highway.py
 F:	support/testing/tests/package/test_hwloc.py
 F:	support/testing/tests/package/test_iperf3.py
 F:	support/testing/tests/package/test_kexec.py
 F:	support/testing/tests/package/test_kexec/
 F:	support/testing/tests/package/test_libjxl.py
-F:	support/testing/tests/package/test_lrzip.py
-F:	support/testing/tests/package/test_lzip.py
 F:	support/testing/tests/package/test_lsof.py
-F:	support/testing/tests/package/test_lz4.py
-F:	support/testing/tests/package/test_lzop.py
 F:	support/testing/tests/package/test_mtools.py
 F:	support/testing/tests/package/test_ncdu.py
-F:	support/testing/tests/package/test_nftables.py
-F:	support/testing/tests/package/test_nftables/
 F:	support/testing/tests/package/test_octave.py
 F:	support/testing/tests/package/test_ola.py
 F:	support/testing/tests/package/test_ola/
 F:	support/testing/tests/package/test_openblas.py
 F:	support/testing/tests/package/test_perftest.py
-F:	support/testing/tests/package/test_pigz.py
 F:	support/testing/tests/package/test_python_distro.py
 F:	support/testing/tests/package/test_python_gnupg.py
 F:	support/testing/tests/package/test_python_hkdf.py
 F:	support/testing/tests/package/test_python_hwdata.py
 F:	support/testing/tests/package/test_python_magic_wormhole.py
-F:	support/testing/tests/package/test_python_midiutil.py
 F:	support/testing/tests/package/test_python_pyalsa.py
 F:	support/testing/tests/package/test_python_spake2.py
 F:	support/testing/tests/package/test_rdma_core.py
 F:	support/testing/tests/package/test_rdma_core/
 F:	support/testing/tests/package/test_stress_ng.py
-F:	support/testing/tests/package/test_xz.py
 F:	support/testing/tests/package/test_z3.py
 F:	support/testing/tests/package/test_z3/
-F:	support/testing/tests/package/test_zchunk.py
-F:	support/testing/tests/package/test_zstd.py
 
 N:	Julien Viard de Galbert <julien@vdg.name>
 F:	package/dieharder/
@@ -1826,11 +1776,6 @@ F:	package/ramsmp/
 N:	Kieran Bingham <kieran.bingham@ideasonboard.com>
 F:	package/libcamera/
 
-N:	Kilian Zinnecker <kilian.zinnecker@mail.de>
-F:	package/rockchip-rkbin/
-F:	configs/rock5b_defconfig
-F:	board/radxa/rock5b/
-
 N:	Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
 F:	package/wqy-zenhei/
 
@@ -2126,6 +2071,11 @@ F:	package/protobuf/
 F:	package/re2/
 F:	package/spdlog/
 
+N:	Michael Rommel <rommel@layer-7.net>
+F:	package/knock/
+F:	package/python-crc16/
+F:	package/python-pyzmq/
+
 N:	Michael Trimarchi <michael@amarulasolutions.com>
 F:	board/bsh/
 F:	configs/imx8mn_bsh_smm_s2_defconfig
@@ -2185,11 +2135,12 @@ N:	Neal Frager <neal.frager@amd.com>
 F:	board/versal/
 F:	board/zynq/
 F:	board/zynqmp/
+F:	board/zynqmp/kria/
 F:	configs/versal_vck190_defconfig
 F:	configs/zynq_zc706_defconfig
-F:	configs/zynqmp_kria_kv260_defconfig
 F:	configs/zynqmp_zcu102_defconfig
 F:	configs/zynqmp_zcu106_defconfig
+F:	configs/zynqmp_kria_kv260_defconfig
 F:	package/bootgen/
 F:	package/versal-firmware/
 
@@ -2202,7 +2153,6 @@ F:	configs/galileo_defconfig
 
 N:	Nicolas Carrier <nicolas.carrier@orolia.com>
 F:	package/bmap-tools/
-F:	package/composer/
 F:	package/libdbi/
 F:	package/libdbi-drivers/
 F:	package/lua-augeas/
@@ -2344,7 +2294,6 @@ F:	configs/roseapplepi_defconfig
 F:	configs/sheevaplug_defconfig
 F:	configs/visionfive_defconfig
 F:	package/bats-core/
-F:	package/dfu-programmer/
 F:	package/docker-compose/
 F:	package/dump1090/
 F:	package/fatcat/
@@ -2379,7 +2328,6 @@ F:	support/testing/tests/package/test_docker_compose.py
 
 N:	Peter Seiderer <ps.report@gmx.net>
 F:	package/dotconf/
-F:	package/python-blinker/
 F:	package/qt5/qt5speech/
 F:	package/speechd/
 
@@ -2456,14 +2404,11 @@ F:	package/tree/
 N:	Pieter De Gendt <pieter.degendt@gmail.com>
 F:	package/libvips/
 
-N:	Pieterjan Camerlynck <pieterjanca@gmail.com>
+N:	Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com>
 F:	package/libdvbpsi/
 F:	package/mraa/
 F:	package/synergy/
 
-N:	Prabhu Sannachi <prabhu.sannachi@collins.com>
-F:	package/redis-plus-plus/
-
 N:	Rafal Susz <rafal.susz@gmail.com>
 F:	board/avnet/s6lx9_microboard/
 F:	configs/s6lx9_microboard_defconfig
@@ -2543,7 +2488,6 @@ F:	package/azmq/
 
 N:	Robert Marko <robimarko@gmail.com>
 F:	package/mdio-tools/
-F:	package/mhz/
 
 N:	Robert Rose <robertroyrose@gmail.com>
 F:	package/grpc/
@@ -2560,6 +2504,7 @@ F:	package/alure/
 F:	package/aubio/
 F:	package/binutils/
 F:	package/bullet/
+F:	package/clang/
 F:	package/clinfo/
 F:	package/efl/
 F:	package/enet/
@@ -2573,13 +2518,12 @@ F:	package/irrlicht/
 F:	package/liblinear/
 F:	package/lensfun/
 F:	package/libbpf/
+F:	package/libclc/
 F:	package/libgta/
 F:	package/libiec61850/
 F:	package/libspatialindex/
 F:	package/linux-syscall-support/
-F:	package/llvm-project/clang/
-F:	package/llvm-project/libclc/
-F:	package/llvm-project/llvm/
+F:	package/llvm/
 F:	package/lugaru/
 F:	package/mcelog/
 F:	package/mesa3d/
@@ -2766,6 +2710,7 @@ F:	package/dvdauthor/
 F:	package/dvdrw-tools/
 F:	package/memtest86/
 F:	package/mjpegtools/
+F:	package/tovid/
 F:	package/udftools/
 F:	package/xorriso/
 
@@ -2986,17 +2931,14 @@ F:	package/gettext-tiny/
 F:	package/tinyssh/
 
 N:	Valentin Korenblit <valentinkorenblit@gmail.com>
+F:	package/clang/
 F:	package/clinfo/
-F:	package/llvm-project/clang/
-F:	package/llvm-project/libclc/
-F:	package/llvm-project/llvm/
+F:	package/libclc/
+F:	package/llvm/
 
 N:	Vanya Sergeev <vsergeev@gmail.com>
 F:	package/lua-periphery/
 
-N:	Viacheslav Bocharov <adeep@lexina.in>
-F:	package/rtl8822cs/
-
 N:	Victor Huesca <victor.huesca@bootlin.com>
 F:	support/testing/tests/core/test_root_password.py
 
@@ -3174,13 +3116,11 @@ F:	package/zlog/
 F:	support/testing/tests/package/sample_python_dicttoxml2.py
 F:	support/testing/tests/package/sample_python_dtschema.py
 F:	support/testing/tests/package/sample_python_munch.py
-F:	support/testing/tests/package/sample_python_pysmb.py
 F:	support/testing/tests/package/test_libftdi1.py
 F:	support/testing/tests/package/test_python_can.py
 F:	support/testing/tests/package/test_python_dicttoxml2.py
 F:	support/testing/tests/package/test_python_dtschema.py
 F:	support/testing/tests/package/test_python_munch.py
-F:	support/testing/tests/package/test_python_pysmb.py
 F:	utils/scanpypi
 
 N:	Yunhao Tian <t123yh.xyz@gmail.com>

Makefile

@@ -90,9 +90,9 @@ all:
 .PHONY: all
 
 # Set and export the version string
-export BR2_VERSION := 2023.08-rc3
+export BR2_VERSION := 2023.05.1
 # Actual time the release is cut (for reproducible builds)
-BR2_VERSION_EPOCH = 1693313000
+BR2_VERSION_EPOCH = 1689606300
 
 # Save running make version since it's clobbered by the make package
 RUNNING_MAKE_VERSION := $(MAKE_VERSION)

arch/Config.in

@@ -216,11 +216,6 @@ config BR2_sh
 config BR2_sparc
 	bool "SPARC"
 	select BR2_USE_MMU
-	# uClibc-ng broken on sparc due to recent gcc changes
-	# that need to be reverted since gcc 8.4, 9.3 and 10.1.
-	# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98784
-	# gcc <= 10.x has been removed from Buildroot.
-	select BR2_ARCH_HAS_NO_TOOLCHAIN_BUILDROOT
 	help
 	  SPARC (from Scalable Processor Architecture) is a RISC
 	  instruction set architecture (ISA) developed by Sun
@@ -309,10 +304,6 @@ config BR2_ARCH_NEEDS_GCC_AT_LEAST_12
 	bool
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_11
 
-config BR2_ARCH_NEEDS_GCC_AT_LEAST_13
-	bool
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_12
-
 # The following string values are defined by the individual
 # Config.in.$ARCH files
 config BR2_ARCH

arch/Config.in.riscv

@@ -18,9 +18,6 @@ config BR2_RISCV_ISA_RVD
 config BR2_RISCV_ISA_RVC
 	bool
 
-config BR2_RISCV_ISA_RVV
-	bool
-
 choice
 	prompt "Target Architecture Variant"
 	default BR2_riscv_g
@@ -38,6 +35,7 @@ config BR2_riscv_g
 config BR2_riscv_custom
 	bool "Custom architecture"
 	select BR2_RISCV_ISA_RVI
+	select BR2_RISCV_ISA_CUSTOM_RVA
 
 endchoice
 
@@ -65,12 +63,6 @@ config BR2_RISCV_ISA_CUSTOM_RVD
 config BR2_RISCV_ISA_CUSTOM_RVC
 	bool "Compressed Instructions (C)"
 	select BR2_RISCV_ISA_RVC
-
-config BR2_RISCV_ISA_CUSTOM_RVV
-	bool "Vector Instructions (V)"
-	select BR2_RISCV_ISA_RVV
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_12
-
 endif
 
 choice

arch/Config.in.x86

@@ -19,20 +19,12 @@ config BR2_X86_CPU_HAS_AVX
 	bool
 config BR2_X86_CPU_HAS_AVX2
 	bool
-
-# BR2_X86_CPU_HAS_AVX512 implies the following AVX512 extensions:
-#   AVX512F, AVX512BW, AVX512CD, AVX512DQ, AVX512VL
-# This subset is common to Intel Xeon (excl Xeon Phi), AMD Zen 4, and
-# the x86-64-v4 psABI.
-#
-# Only select BR2_X86_CPU_HAS_AVX512 if the CPU supports this entire
-# subset of extensions.
 config BR2_X86_CPU_HAS_AVX512
 	bool
 
 # This list of CPU architecture variant is (loosely) ordered according
 # to the gcc documentation at
-# https://gcc.gnu.org/onlinedocs/gcc-13.2.0/gcc/x86-Options.html
+# https://gcc.gnu.org/onlinedocs/gcc-11.2.0/gcc/x86-Options.html
 choice
 	prompt "Target Architecture Variant"
 	default BR2_x86_i586 if BR2_i386
@@ -235,17 +227,6 @@ config BR2_x86_sandybridge
 	select BR2_X86_CPU_HAS_SSE42
 	select BR2_X86_CPU_HAS_AVX
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_4_9
-config BR2_x86_ivybridge
-	bool "ivybridge"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_4_9
 config BR2_x86_core_avx2
 	bool "core-avx2"
 	select BR2_X86_CPU_HAS_MMX
@@ -354,54 +335,6 @@ config BR2_x86_tremont
 	select BR2_X86_CPU_HAS_SSE4
 	select BR2_X86_CPU_HAS_SSE42
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_9
-config BR2_x86_sierraforest
-	bool "sierraforest"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_13
-config BR2_x86_grandridge
-	bool "grandridge"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_13
-config BR2_x86_knightslanding
-	bool "knightslanding"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_5
-config BR2_x86_knightsmill
-	bool "knightsmill"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_8
 config BR2_x86_skylake_avx512
 	bool "skylake-avx512"
 	select BR2_X86_CPU_HAS_MMX
@@ -506,8 +439,6 @@ config BR2_x86_sapphirerapids
 	select BR2_X86_CPU_HAS_AVX2
 	select BR2_X86_CPU_HAS_AVX512
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_11
-	help
-	  Use for Sapphire Rapids, Emerald Rapids
 config BR2_x86_alderlake
 	bool "alderlake"
 	select BR2_X86_CPU_HAS_MMX
@@ -519,9 +450,8 @@ config BR2_x86_alderlake
 	select BR2_X86_CPU_HAS_SSE42
 	select BR2_X86_CPU_HAS_AVX
 	select BR2_X86_CPU_HAS_AVX2
+	select BR2_X86_CPU_HAS_AVX512
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_11
-	help
-	  Use for Alder Lake, Raptor Lake, Meteor Lake
 config BR2_x86_rocketlake
 	bool "rocketlake"
 	select BR2_X86_CPU_HAS_MMX
@@ -535,32 +465,6 @@ config BR2_x86_rocketlake
 	select BR2_X86_CPU_HAS_AVX2
 	select BR2_X86_CPU_HAS_AVX512
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_11
-config BR2_x86_graniterapids
-	bool "graniterapids"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_X86_CPU_HAS_AVX512
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_13
-config BR2_x86_graniterapids_d
-	bool "graniterapids-d"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_X86_CPU_HAS_AVX512
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_13
 config BR2_x86_k6
 	bool "k6"
 	depends on !BR2_x86_64
@@ -598,13 +502,6 @@ config BR2_x86_barcelona
 	select BR2_X86_CPU_HAS_SSE
 	select BR2_X86_CPU_HAS_SSE2
 	select BR2_X86_CPU_HAS_SSE3
-config BR2_x86_bobcat
-	bool "bobcat"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
 config BR2_x86_jaguar
 	bool "jaguar"
 	select BR2_X86_CPU_HAS_MMX
@@ -614,25 +511,6 @@ config BR2_x86_jaguar
 	select BR2_X86_CPU_HAS_SSSE3
 	select BR2_X86_CPU_HAS_SSE4
 	select BR2_X86_CPU_HAS_SSE42
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_4_8
-config BR2_x86_bulldozer
-	bool "bulldozer"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-config BR2_x86_piledriver
-	bool "piledriver"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
 config BR2_x86_steamroller
 	bool "steamroller"
 	select BR2_X86_CPU_HAS_MMX
@@ -642,73 +520,12 @@ config BR2_x86_steamroller
 	select BR2_X86_CPU_HAS_SSSE3
 	select BR2_X86_CPU_HAS_SSE4
 	select BR2_X86_CPU_HAS_SSE42
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_4_8
-config BR2_x86_excavator
-	bool "excavator"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_4_9
-config BR2_x86_zen
-	bool "zen"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_6
-config BR2_x86_zen2
-	bool "zen 2"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_9
-config BR2_x86_zen3
-	bool "zen 3"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_11
-config BR2_x86_zen4
-	bool "zen 4"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_X86_CPU_HAS_AVX512
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_13
 config BR2_x86_geode
-	bool "AMD Geode"
+	bool "geode"
+	# Don't include MMX support because there several variant of geode
+	# processor, some with MMX support, some without.
+	# See: http://en.wikipedia.org/wiki/Geode_%28processor%29
 	depends on !BR2_x86_64
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_3DNOW
 config BR2_x86_c3
 	bool "Via/Cyrix C3 (Samuel/Ezra cores)"
 	depends on !BR2_x86_64
@@ -776,7 +593,6 @@ config BR2_GCC_TARGET_ARCH
 	default "nehalem"	if BR2_x86_nehalem
 	default "corei7-avx"	if BR2_x86_corei7_avx
 	default "sandybridge"	if BR2_x86_sandybridge
-	default "ivybridge"	if BR2_x86_ivybridge
 	default "core-avx2"	if BR2_x86_core_avx2
 	default "haswell"	if BR2_x86_haswell
 	default "broadwell"	if BR2_x86_broadwell
@@ -788,10 +604,6 @@ config BR2_GCC_TARGET_ARCH
 	default "goldmont"	if BR2_x86_goldmont
 	default "goldmont-plus"	if BR2_x86_goldmont_plus
 	default "tremont"	if BR2_x86_tremont
-	default "sierraforest"	if BR2_x86_sierraforest
-	default "grandridge"	if BR2_x86_grandridge
-	default "knl"		if BR2_x86_knightslanding
-	default "knm"		if BR2_x86_knightsmill
 	default "skylake-avx512" if BR2_x86_skylake_avx512
 	default "cannonlake"	if BR2_x86_cannonlake
 	default "icelake-client" if BR2_x86_icelake_client
@@ -802,21 +614,11 @@ config BR2_GCC_TARGET_ARCH
 	default "sapphirerapids" if BR2_x86_sapphirerapids
 	default "alderlake"	if BR2_x86_alderlake
 	default "rocketlake"	if BR2_x86_rocketlake
-	default "graniterapids"	if BR2_x86_graniterapids
-	default "graniterapids-d"	if BR2_x86_graniterapids_d
 	default "k8"		if BR2_x86_opteron
 	default "k8-sse3"	if BR2_x86_opteron_sse3
 	default "barcelona"	if BR2_x86_barcelona
-	default "btver1"	if BR2_x86_bobcat
 	default "btver2"	if BR2_x86_jaguar
-	default "bdver1"	if BR2_x86_bulldozer
-	default "bdver2"	if BR2_x86_piledriver
 	default "bdver3"	if BR2_x86_steamroller
-	default "bdver4"	if BR2_x86_excavator
-	default "znver1"	if BR2_x86_zen
-	default "znver2"	if BR2_x86_zen2
-	default "znver3"	if BR2_x86_zen3
-	default "znver4"	if BR2_x86_zen4
 	default "k6"		if BR2_x86_k6
 	default "k6-2"		if BR2_x86_k6_2
 	default "athlon"	if BR2_x86_athlon

arch/arch.mk.riscv

@@ -26,9 +26,6 @@ endif
 ifeq ($(BR2_RISCV_ISA_RVC),y)
 GCC_TARGET_ARCH := $(GCC_TARGET_ARCH)c
 endif
-ifeq ($(BR2_RISCV_ISA_RVV),y)
-GCC_TARGET_ARCH := $(GCC_TARGET_ARCH)v
-endif
 
 # Starting from gcc 12.x, csr and fence instructions have been
 # separated from the base I instruction set, and special -march

board/bsh/imx8mn-bsh-smm-s2/readme.txt

@@ -2,7 +2,7 @@ i.MX8MN BSH SMM S2
 ==================
 
 This tutorial describes how to use the predefined Buildroot
-configuration for the i.MX8MN BSH SMM S2 board.
+configuration for the i.MX8MN BSH SMM S2 PRO board.
 
 Building
 --------

board/canaan/k210-soc/patches/uboot/0001-riscv-Fix-build-against-binutils-2.38.patch

@@ -1,58 +0,0 @@
-From 0cf11f3c0478f4286adcfb09bf9137f8b00212e3 Mon Sep 17 00:00:00 2001
-From: Alexandre Ghiti <alexandre.ghiti@canonical.com>
-Date: Mon, 3 Oct 2022 18:07:54 +0200
-Subject: [PATCH] riscv: Fix build against binutils 2.38
-
-The following description is copied from the equivalent patch for the
-Linux Kernel proposed by Aurelien Jarno:
-
->From version 2.38, binutils default to ISA spec version 20191213. This
-means that the csr read/write (csrr*/csrw*) instructions and fence.i
-instruction has separated from the `I` extension, become two standalone
-extensions: Zicsr and Zifencei. As the kernel uses those instruction,
-this causes the following build failure:
-
-arch/riscv/cpu/mtrap.S: Assembler messages:
-arch/riscv/cpu/mtrap.S:65: Error: unrecognized opcode `csrr a0,scause'
-arch/riscv/cpu/mtrap.S:66: Error: unrecognized opcode `csrr a1,sepc'
-arch/riscv/cpu/mtrap.S:67: Error: unrecognized opcode `csrr a2,stval'
-arch/riscv/cpu/mtrap.S:70: Error: unrecognized opcode `csrw sepc,a0'
-
-Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
-Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
-Tested-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
-Tested-by: Heiko Stuebner <heiko@sntech.de>
-Tested-by: Christian Stewart <christian@paral.in>
-Reviewed-by: Rick Chen <rick@andestech.com>
-(cherry picked from commit 1dde977518f13824b847e23275001191139bc384)
-Upstream: https://gitlab.com/u-boot/u-boot/-/commit/1dde977518f13824b847e23275001191139bc384
-Signed-off-by: Romain Naour <romain.naour@gmail.com>
----
- arch/riscv/Makefile | 11 ++++++++++-
- 1 file changed, 10 insertions(+), 1 deletion(-)
-
-diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
-index 0b80eb8d864..53d1194ffb6 100644
---- a/arch/riscv/Makefile
-+++ b/arch/riscv/Makefile
-@@ -24,7 +24,16 @@ ifeq ($(CONFIG_CMODEL_MEDANY),y)
- 	CMODEL = medany
- endif
- 
--ARCH_FLAGS = -march=$(ARCH_BASE)$(ARCH_A)$(ARCH_C) -mabi=$(ABI) \
-+RISCV_MARCH = $(ARCH_BASE)$(ARCH_A)$(ARCH_C)
-+
-+# Newer binutils versions default to ISA spec version 20191213 which moves some
-+# instructions from the I extension to the Zicsr and Zifencei extensions.
-+toolchain-need-zicsr-zifencei := $(call cc-option-yn, -mabi=$(ABI) -march=$(RISCV_MARCH)_zicsr_zifencei)
-+ifeq ($(toolchain-need-zicsr-zifencei),y)
-+	RISCV_MARCH := $(RISCV_MARCH)_zicsr_zifencei
-+endif
-+
-+ARCH_FLAGS = -march=$(RISCV_MARCH) -mabi=$(ABI) \
- 	     -mcmodel=$(CMODEL)
- 
- PLATFORM_CPPFLAGS	+= $(ARCH_FLAGS)
--- 
-2.41.0
-

board/qemu/m68k-mcf5208/0001-m68k-Fix-invalid-.section-syntax.patch

@@ -1,97 +0,0 @@
-From 0bb6b7477f5dcfafbdd76eea9c7aa7a5f78d7613 Mon Sep 17 00:00:00 2001
-From: Ben Hutchings <benh@debian.org>
-Date: Fri, 16 Jun 2023 17:36:10 +0200
-Subject: [PATCH] m68k: Fix invalid .section syntax
-
-gas supports several different forms for .section for ELF targets,
-including:
-    .section NAME [, "FLAGS"[, @TYPE[,FLAG_SPECIFIC_ARGUMENTS]]]
-and:
-    .section "NAME"[, #FLAGS...]
-
-In several places we use a mix of these two forms:
-    .section NAME, #FLAGS...
-
-A current development snapshot of binutils (2.40.50.20230611) treats
-this mixed syntax as an error.
-
-Change to consistently use:
-    .section NAME, "FLAGS"
-as is used elsewhere in the kernel.
-
-Link: https://buildd.debian.org/status/fetch.php?pkg=linux&arch=m68k&ver=6.4%7Erc6-1%7Eexp1&stamp=1686907300&raw=1
-Signed-off-by: Ben Hutchings <benh@debian.org>
-Tested-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
-Link: https://lore.kernel.org/r/ZIyBaueWT9jnTwRC@decadent.org.uk
-Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
-Upstream: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=922a9bd138101e3e5718f0f4d40dba68ef89bb43
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
----
- arch/m68k/fpsp040/skeleton.S       | 4 ++--
- arch/m68k/ifpsp060/os.S            | 4 ++--
- arch/m68k/kernel/relocate_kernel.S | 4 ++--
- 3 files changed, 6 insertions(+), 6 deletions(-)
-
-diff --git a/arch/m68k/fpsp040/skeleton.S b/arch/m68k/fpsp040/skeleton.S
-index 439395aa6fb4..081922c72daa 100644
---- a/arch/m68k/fpsp040/skeleton.S
-+++ b/arch/m68k/fpsp040/skeleton.S
-@@ -499,13 +499,13 @@ in_ea:
- 	dbf	%d0,morein
- 	rts
- 
--	.section .fixup,#alloc,#execinstr
-+	.section .fixup,"ax"
- 	.even
- 1:
- 	jbsr	fpsp040_die
- 	jbra	.Lnotkern
- 
--	.section __ex_table,#alloc
-+	.section __ex_table,"a"
- 	.align	4
- 
- 	.long	in_ea,1b
-diff --git a/arch/m68k/ifpsp060/os.S b/arch/m68k/ifpsp060/os.S
-index 7a0d6e428066..89e2ec224ab6 100644
---- a/arch/m68k/ifpsp060/os.S
-+++ b/arch/m68k/ifpsp060/os.S
-@@ -379,11 +379,11 @@ _060_real_access:
- 
- 
- | Execption handling for movs access to illegal memory
--	.section .fixup,#alloc,#execinstr
-+	.section .fixup,"ax"
- 	.even
- 1:	moveq		#-1,%d1
- 	rts
--.section __ex_table,#alloc
-+.section __ex_table,"a"
- 	.align 4
- 	.long	dmrbuae,1b
- 	.long	dmrwuae,1b
-diff --git a/arch/m68k/kernel/relocate_kernel.S b/arch/m68k/kernel/relocate_kernel.S
-index ab0f1e7d4653..f7667079e08e 100644
---- a/arch/m68k/kernel/relocate_kernel.S
-+++ b/arch/m68k/kernel/relocate_kernel.S
-@@ -26,7 +26,7 @@ ENTRY(relocate_new_kernel)
- 	lea %pc@(.Lcopy),%a4
- 2:	addl #0x00000000,%a4		/* virt_to_phys() */
- 
--	.section ".m68k_fixup","aw"
-+	.section .m68k_fixup,"aw"
- 	.long M68K_FIXUP_MEMOFFSET, 2b+2
- 	.previous
- 
-@@ -49,7 +49,7 @@ ENTRY(relocate_new_kernel)
- 	lea %pc@(.Lcont040),%a4
- 5:	addl #0x00000000,%a4		/* virt_to_phys() */
- 
--	.section ".m68k_fixup","aw"
-+	.section .m68k_fixup,"aw"
- 	.long M68K_FIXUP_MEMOFFSET, 5b+2
- 	.previous
- 
--- 
-2.41.0
-

board/qemu/m68k-q800/0001-m68k-Fix-invalid-.section-syntax.patch

@@ -1,97 +0,0 @@
-From 0bb6b7477f5dcfafbdd76eea9c7aa7a5f78d7613 Mon Sep 17 00:00:00 2001
-From: Ben Hutchings <benh@debian.org>
-Date: Fri, 16 Jun 2023 17:36:10 +0200
-Subject: [PATCH] m68k: Fix invalid .section syntax
-
-gas supports several different forms for .section for ELF targets,
-including:
-    .section NAME [, "FLAGS"[, @TYPE[,FLAG_SPECIFIC_ARGUMENTS]]]
-and:
-    .section "NAME"[, #FLAGS...]
-
-In several places we use a mix of these two forms:
-    .section NAME, #FLAGS...
-
-A current development snapshot of binutils (2.40.50.20230611) treats
-this mixed syntax as an error.
-
-Change to consistently use:
-    .section NAME, "FLAGS"
-as is used elsewhere in the kernel.
-
-Link: https://buildd.debian.org/status/fetch.php?pkg=linux&arch=m68k&ver=6.4%7Erc6-1%7Eexp1&stamp=1686907300&raw=1
-Signed-off-by: Ben Hutchings <benh@debian.org>
-Tested-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
-Link: https://lore.kernel.org/r/ZIyBaueWT9jnTwRC@decadent.org.uk
-Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
-Upstream: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=922a9bd138101e3e5718f0f4d40dba68ef89bb43
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
----
- arch/m68k/fpsp040/skeleton.S       | 4 ++--
- arch/m68k/ifpsp060/os.S            | 4 ++--
- arch/m68k/kernel/relocate_kernel.S | 4 ++--
- 3 files changed, 6 insertions(+), 6 deletions(-)
-
-diff --git a/arch/m68k/fpsp040/skeleton.S b/arch/m68k/fpsp040/skeleton.S
-index 439395aa6fb4..081922c72daa 100644
---- a/arch/m68k/fpsp040/skeleton.S
-+++ b/arch/m68k/fpsp040/skeleton.S
-@@ -499,13 +499,13 @@ in_ea:
- 	dbf	%d0,morein
- 	rts
- 
--	.section .fixup,#alloc,#execinstr
-+	.section .fixup,"ax"
- 	.even
- 1:
- 	jbsr	fpsp040_die
- 	jbra	.Lnotkern
- 
--	.section __ex_table,#alloc
-+	.section __ex_table,"a"
- 	.align	4
- 
- 	.long	in_ea,1b
-diff --git a/arch/m68k/ifpsp060/os.S b/arch/m68k/ifpsp060/os.S
-index 7a0d6e428066..89e2ec224ab6 100644
---- a/arch/m68k/ifpsp060/os.S
-+++ b/arch/m68k/ifpsp060/os.S
-@@ -379,11 +379,11 @@ _060_real_access:
- 
- 
- | Execption handling for movs access to illegal memory
--	.section .fixup,#alloc,#execinstr
-+	.section .fixup,"ax"
- 	.even
- 1:	moveq		#-1,%d1
- 	rts
--.section __ex_table,#alloc
-+.section __ex_table,"a"
- 	.align 4
- 	.long	dmrbuae,1b
- 	.long	dmrwuae,1b
-diff --git a/arch/m68k/kernel/relocate_kernel.S b/arch/m68k/kernel/relocate_kernel.S
-index ab0f1e7d4653..f7667079e08e 100644
---- a/arch/m68k/kernel/relocate_kernel.S
-+++ b/arch/m68k/kernel/relocate_kernel.S
-@@ -26,7 +26,7 @@ ENTRY(relocate_new_kernel)
- 	lea %pc@(.Lcopy),%a4
- 2:	addl #0x00000000,%a4		/* virt_to_phys() */
- 
--	.section ".m68k_fixup","aw"
-+	.section .m68k_fixup,"aw"
- 	.long M68K_FIXUP_MEMOFFSET, 2b+2
- 	.previous
- 
-@@ -49,7 +49,7 @@ ENTRY(relocate_new_kernel)
- 	lea %pc@(.Lcont040),%a4
- 5:	addl #0x00000000,%a4		/* virt_to_phys() */
- 
--	.section ".m68k_fixup","aw"
-+	.section .m68k_fixup,"aw"
- 	.long M68K_FIXUP_MEMOFFSET, 5b+2
- 	.previous
- 
--- 
-2.41.0
-

board/qemu/ppc64le-powernv8/readme.txt

@@ -1,5 +1,5 @@
 Run the emulation with:
 
-qemu-system-ppc64 -M powernv9 -kernel output/images/vmlinux -append "console=hvc0 rootwait root=/dev/nvme0n1" -device nvme,bus=pcie.3,addr=0x0,drive=drive0,serial=1234 -drive file=output/images/rootfs.ext2,if=none,id=drive0,format=raw,cache=none -device e1000e,netdev=net0,mac=C0:FF:EE:00:01:03,bus=pcie.1,addr=0x0  -netdev user,id=net0 -serial mon:stdio -nographic # qemu_ppc64le_powernv8_defconfig
+qemu-system-ppc64 -M powernv9 -kernel vmlinux -append "console=hvc0 rootwait root=/dev/nvme0n1" -device nvme,bus=pcie.3,addr=0x0,drive=drive0,serial=1234 -drive file=./rootfs.ext2,if=none,id=drive0,format=raw,cache=none -device e1000e,netdev=net0,mac=C0:FF:EE:00:01:03,bus=pcie.1,addr=0x0  -netdev user,id=net0 -serial mon:stdio -nographic # qemu_ppc64le_powernv8_defconfig
 
 The login prompt will appear in the terminal window.

board/radxa/rock5b/boot.cmd

@@ -1,3 +0,0 @@
-setenv bootargs root=/dev/mmcblk0p2 rw rootfstype=ext4 clkin_hz=(25000000) earlycon clk_ignore_unused earlyprintk console=ttyS2,1500000n8 rootwait
-fatload mmc 1:1 ${loadaddr} image.itb
-bootm ${loadaddr}

board/radxa/rock5b/genimage.cfg

@@ -1,34 +0,0 @@
-# SD card image for Radxa Rock 5b
-
-image boot.vfat {
-	vfat {
-		files = {
-			"image.itb",
-			"boot.scr"
-		}
-	}
-	size = 16M
-}
-
-image sdcard.img {
-	hdimage {
-		partition-table-type = "hybrid"
-	}
-
-	partition uboot {
-		in-partition-table = "false"
-		image = "u-boot-rockchip.bin"
-		offset = 32K
-	}
-
-	partition boot {
-		partition-type = "0xC"
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext2"
-	}
-}

board/radxa/rock5b/linux.fragment

@@ -1,4 +0,0 @@
-CONFIG_R8169=y
-# Disable Rockchip specific WiFi drivers, as the kernel
-# code cannot be build with GCC 12 due to several Werrors
-# CONFIG_WL_ROCKCHIP is not set

board/radxa/rock5b/patches/linux/0001-etherdevice-Adjust-ether_addr-prototypes-to-silence-.patch

@@ -1,64 +0,0 @@
-From 2618a0dae09ef37728dab89ff60418cbe25ae6bd Mon Sep 17 00:00:00 2001
-From: Kees Cook <keescook@chromium.org>
-Date: Sat, 12 Feb 2022 09:14:49 -0800
-Subject: etherdevice: Adjust ether_addr* prototypes to silence
- -Wstringop-overead
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-With GCC 12, -Wstringop-overread was warning about an implicit cast from
-char[6] to char[8]. However, the extra 2 bytes are always thrown away,
-alignment doesn't matter, and the risk of hitting the edge of unallocated
-memory has been accepted, so this prototype can just be converted to a
-regular char *. Silences:
-
-net/core/dev.c: In function ‘bpf_prog_run_generic_xdp’: net/core/dev.c:4618:21: warning: ‘ether_addr_equal_64bits’ reading 8 bytes from a region of size 6 [-Wstringop-overread]
- 4618 |         orig_host = ether_addr_equal_64bits(eth->h_dest, > skb->dev->dev_addr);
-      |                     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-net/core/dev.c:4618:21: note: referencing argument 1 of type ‘const u8[8]’ {aka ‘const unsigned char[8]’}
-net/core/dev.c:4618:21: note: referencing argument 2 of type ‘const u8[8]’ {aka ‘const unsigned char[8]’}
-In file included from net/core/dev.c:91: include/linux/etherdevice.h:375:20: note: in a call to function ‘ether_addr_equal_64bits’
-  375 | static inline bool ether_addr_equal_64bits(const u8 addr1[6+2],
-      |                    ^~~~~~~~~~~~~~~~~~~~~~~
-
-Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
-Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
-Link: https://lore.kernel.org/netdev/20220212090811.uuzk6d76agw2vv73@pengutronix.de
-Cc: Jakub Kicinski <kuba@kernel.org>
-Cc: "David S. Miller" <davem@davemloft.net>
-Cc: netdev@vger.kernel.org
-Signed-off-by: Kees Cook <keescook@chromium.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Upstream: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2618a0dae09ef37728dab89ff60418cbe25ae6bd
-Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
----
- include/linux/etherdevice.h | 5 ++---
- 1 file changed, 2 insertions(+), 3 deletions(-)
-
-diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
-index 2ad71cc90b37d..92b10e67d5f87 100644
---- a/include/linux/etherdevice.h
-+++ b/include/linux/etherdevice.h
-@@ -134,7 +134,7 @@ static inline bool is_multicast_ether_addr(const u8 *addr)
- #endif
- }
- 
--static inline bool is_multicast_ether_addr_64bits(const u8 addr[6+2])
-+static inline bool is_multicast_ether_addr_64bits(const u8 *addr)
- {
- #if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) && BITS_PER_LONG == 64
- #ifdef __BIG_ENDIAN
-@@ -372,8 +372,7 @@ static inline bool ether_addr_equal(const u8 *addr1, const u8 *addr2)
-  * Please note that alignment of addr1 & addr2 are only guaranteed to be 16 bits.
-  */
- 
--static inline bool ether_addr_equal_64bits(const u8 addr1[6+2],
--					   const u8 addr2[6+2])
-+static inline bool ether_addr_equal_64bits(const u8 *addr1, const u8 *addr2)
- {
- #if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) && BITS_PER_LONG == 64
- 	u64 fold = (*(const u64 *)addr1) ^ (*(const u64 *)addr2);
--- 
-cgit 
-

board/radxa/rock5b/patches/linux/0002-mm-page_alloc-fix-building-error-on-Werror-array-com.patch

@@ -1,43 +0,0 @@
-From ca831f29f8f25c97182e726429b38c0802200c8f Mon Sep 17 00:00:00 2001
-From: Xiongwei Song <sxwjean@gmail.com>
-Date: Fri, 14 Jan 2022 14:07:24 -0800
-Subject: mm: page_alloc: fix building error on -Werror=array-compare
-
-Arthur Marsh reported we would hit the error below when building kernel
-with gcc-12:
-
-  CC      mm/page_alloc.o
-  mm/page_alloc.c: In function `mem_init_print_info':
-  mm/page_alloc.c:8173:27: error: comparison between two arrays [-Werror=array-compare]
-   8173 |                 if (start <= pos && pos < end && size > adj) \
-        |
-
-In C++20, the comparision between arrays should be warned.
-
-Link: https://lkml.kernel.org/r/20211125130928.32465-1-sxwjean@me.com
-Signed-off-by: Xiongwei Song <sxwjean@gmail.com>
-Reported-by: Arthur Marsh <arthur.marsh@internode.on.net>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-Upstream: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ca831f29f8f25c97182e726429b38c0802200c8f
-Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
----
- mm/page_alloc.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/mm/page_alloc.c b/mm/page_alloc.c
-index 806f317c2e7e2..c4ef450ac4428 100644
---- a/mm/page_alloc.c
-+++ b/mm/page_alloc.c
-@@ -8228,7 +8228,7 @@ void __init mem_init_print_info(void)
- 	 */
- #define adj_init_size(start, end, size, pos, adj) \
- 	do { \
--		if (start <= pos && pos < end && size > adj) \
-+		if (&start[0] <= &pos[0] && &pos[0] < &end[0] && size > adj) \
- 			size -= adj; \
- 	} while (0)
- 
--- 
-cgit 
-

board/radxa/rock5b/post-image.sh

@@ -1,7 +0,0 @@
-#!/usr/bin/env bash
-set -e
-
-gzip -fk "${BINARIES_DIR}/Image"
-cp board/radxa/rock5b/rock5b.its "${BINARIES_DIR}"
-(cd "${BINARIES_DIR}" && mkimage -f rock5b.its image.itb)
-support/scripts/genimage.sh -c board/radxa/rock5b/genimage.cfg

board/radxa/rock5b/readme.txt

@@ -1,82 +0,0 @@
-RADXA ROCK 5B
-==============
-https://wiki.radxa.com/Rock5/hardware/5b
-
-Build:
-======
-  $ make rock5b_defconfig
-  $ make
-
-Files created in output directory
-=================================
-
-output/images
-.
-├── Image
-├── Image.gz
-├── boot.scr
-├── boot.vfat
-├── image.itb
-├── rk3588-rock-5b.dtb
-├── rk3588_bl31_v1.40.elf
-├── rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.12.bin
-├── rock5b.its
-├── rootfs.ext2
-├── rootfs.ext4
-├── rootfs.tar
-├── sdcard.img
-├── u-boot-rockchip.bin
-└── u-boot.bin
-
-Creating bootable SD card:
-==========================
-
-Simply invoke (as root)
-
-sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
-
-Where X is your SD card device.
-
-Booting:
-========
-
-Serial console:
----------------
-The Rock 5B has a 40-pin GPIO header. Its layout can be seen here:
-https://wiki.radxa.com/Rock5/hardware/5b/gpio
-
-The Uart pins are as follows:
-
-pin 6:  gnd
-pin 8:  tx
-pin 10: rx
-
-Baudrate for this board is 1500000.
-
-Login:
-------
-Enter 'root' as login user, and the prompt is ready.
-
-wiki link:
-----------
-https://forum.radxa.com/c/rock5
-
-Issues:
-=======
-
-The custom Radxa kernel provides custom code to support WiFi. However,
-that code does not compile with GCC 12, which is the current default
-version in buildroot. Hence, the WiFi kernel drivers are disabled, until
-the issues get fixed (if ever). If they are desperately needed, one may
-apply the following workaround, as long as buildroot still supports GCC
-version 11:
-
-1. Set GCC version 11, by adding the following line to
-configs/rock5b_defconfig:
-
-BR2_GCC_VERSION_11_X=y
-
-2. Re-enable custom WiFi drivers by removing the following line from
-board/radxa/rock5b/linux.fragment:
-
-# CONFIG_WL_ROCKCHIP is not set

board/radxa/rock5b/rock5b.its

@@ -1,46 +0,0 @@
-/dts-v1/;
-
-/ {
-	description = "Rock 5B FIT Image";
-	#address-cells = <1>;
-
-	images {
-		kernel {
-			description = "Kernel";
-			data = /incbin/("Image.gz");
-			type = "kernel";
-			arch = "arm64";
-			os = "linux";
-			compression = "gzip";
-			load = <0x0a200000>;
-			entry = <0x0a200000>;
-			hash {
-				algo = "sha256";
-			};
-		};
-		fdt {
-			description = "Device Tree";
-			data = /incbin/("rk3588-rock-5b.dtb");
-			type = "flat_dt";
-			arch = "arm64";
-			compression = "none";
-			load = <0x0e000000>;
-			entry = <0x0e000000>;
-			hash {
-				algo = "sha256";
-			};
-		};
-	};
-
-	configurations {
-		default = "standard";
-		standard {
-			description = "Standard Boot";
-			kernel = "kernel";
-			fdt = "fdt";
-			hash {
-				algo = "sha256";
-			};
-		};
-	};
-};

board/raspberrypi/post-build.sh

@@ -8,11 +8,6 @@ if [ -e ${TARGET_DIR}/etc/inittab ]; then
     grep -qE '^tty1::' ${TARGET_DIR}/etc/inittab || \
 	sed -i '/GENERIC_SERIAL/a\
 tty1::respawn:/sbin/getty -L  tty1 0 vt100 # HDMI console' ${TARGET_DIR}/etc/inittab
-# systemd doesn't use /etc/inittab, enable getty.tty1.service instead
-elif [ -d ${TARGET_DIR}/etc/systemd ]; then
-    mkdir -p "${TARGET_DIR}/etc/systemd/system/getty.target.wants"
-    ln -sf /lib/systemd/system/getty@.service \
-       "${TARGET_DIR}/etc/systemd/system/getty.target.wants/getty@tty1.service"
 fi
 
 # exnsure overlays exists for genimage

board/stmicroelectronics/common/stm32f4xx/busybox.fragment

@@ -1,21 +0,0 @@
-# CONFIG_FEATURE_HWIB is not set
-# CONFIG_HOSTNAME is not set
-# CONFIG_DNSDOMAINNAME is not set
-# CONFIG_FEATURE_HTTPD_PORT_DEFAULT is not set
-# CONFIG_IFCONFIG is not set
-# CONFIG_FEATURE_IFCONFIG_HW is not set
-# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set
-# CONFIG_IFUP is not set
-# CONFIG_IFDOWN is not set
-# CONFIG_IP is not set
-# CONFIG_IPADDR is not set
-# CONFIG_IPLINK is not set
-# CONFIG_IPROUTE is not set
-# CONFIG_NC is not set
-# CONFIG_NETSTAT is not set
-# CONFIG_PING is not set
-# CONFIG_ROUTE is not set
-# CONFIG_TC is not set
-# CONFIG_TELNET is not set
-# CONFIG_WGET is not set
-# CONFIG_UDHCPC is not set

board/stmicroelectronics/common/stm32f4xx/stm32-post-build.sh

@@ -1,7 +1,4 @@
 #!/bin/sh
 
-# Busybox is built without network support
-sed -i '/hostname/d' ${TARGET_DIR}/etc/inittab
-
 # Kernel is built without devpts support
 sed -i '/^devpts/d' ${TARGET_DIR}/etc/fstab

board/versal/patches/arm-trusted-firmware/0001-feat-build-add-support-for-new-binutils-versions.patch

@@ -1 +0,0 @@
-../../../../boot/arm-trusted-firmware/v2.6/0001-feat-build-add-support-for-new-binutils-versions.patch

board/versal/post-build.sh

@@ -3,8 +3,9 @@
 # genimage will need to find the extlinux.conf
 # in the binaries directory
 
-CONSOLE="$2"
-ROOT="$3"
+BOARD_DIR="$(dirname $0)"
+CONSOLE=$2
+ROOT=$3
 
 mkdir -p "${BINARIES_DIR}"
 cat <<-__HEADER_EOF > "${BINARIES_DIR}/extlinux.conf"

board/versal/post-image.sh

@@ -6,12 +6,12 @@
 
 FIRST_DT=$(sed -nr \
                -e 's|^BR2_LINUX_KERNEL_INTREE_DTS_NAME="(xilinx/)?([-_/[:alnum:]\\.]*).*"$|\2|p' \
-               "${BR2_CONFIG}")
+               ${BR2_CONFIG})
 
-[ -z "${FIRST_DT}" ] || ln -fs "${FIRST_DT}.dtb" "${BINARIES_DIR}/system.dtb"
+[ -z "${FIRST_DT}" ] || ln -fs ${FIRST_DT}.dtb ${BINARIES_DIR}/system.dtb
 
-BOARD_DIR="$(dirname "$0")"
-BOARD_NAME="$4"
+BOARD_DIR="$(dirname $0)"
+BOARD_NAME=$4
 
 mkdir -p "${BINARIES_DIR}"
 cat <<-__HEADER_EOF > "${BINARIES_DIR}/bootgen.bif"
@@ -23,7 +23,7 @@ cat <<-__HEADER_EOF > "${BINARIES_DIR}/bootgen.bif"
 	    { core=psm, file=${BINARIES_DIR}/${BOARD_NAME}_psmfw.elf }
 	  }
 	  image {
-	    id = 0x1c000000, name=apu_subsystem
+	    id = 0x1c000000, name=apu_subsystem 
 	    { type=raw, load=0x00001000, file=${BINARIES_DIR}/u-boot.dtb }
 	    { core=a72-0, exception_level=el-3, trustzone, file=${BINARIES_DIR}/bl31.elf }
 	    { core=a72-0, exception_level=el-2, file=${BINARIES_DIR}/u-boot.elf }
@@ -31,5 +31,5 @@ cat <<-__HEADER_EOF > "${BINARIES_DIR}/bootgen.bif"
 	}
 	__HEADER_EOF
 
-"${HOST_DIR}/bin/bootgen" -arch versal -image "${BINARIES_DIR}/bootgen.bif" -o "${BINARIES_DIR}/boot.bin" -w on
-support/scripts/genimage.sh -c "${BOARD_DIR}/genimage.cfg"
+${HOST_DIR}/bin/bootgen -arch versal -image ${BINARIES_DIR}/bootgen.bif -o ${BINARIES_DIR}/boot.bin -w on
+support/scripts/genimage.sh -c ${BOARD_DIR}/genimage.cfg

board/zynq/post-image.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# By default U-Boot loads DTB from a file named "system.dtb", so
+# By default U-Boot loads DTB from a file named "devicetree.dtb", so
 # let's use a symlink with that name that points to the *first*
 # devicetree listed in the config.
 

board/zynqmp/patches/arm-trusted-firmware/0001-feat-build-add-support-for-new-binutils-versions.patch

@@ -1 +0,0 @@
-../../../../boot/arm-trusted-firmware/v2.6/0001-feat-build-add-support-for-new-binutils-versions.patch

boot/Config.in

@@ -12,6 +12,7 @@ source "boot/binaries-marvell/Config.in"
 source "boot/boot-wrapper-aarch64/Config.in"
 source "boot/edk2/Config.in"
 source "boot/grub2/Config.in"
+source "boot/lpc32xxcdl/Config.in"
 source "boot/mv-ddr-marvell/Config.in"
 source "boot/mxs-bootlets/Config.in"
 source "boot/optee-os/Config.in"

boot/arm-trusted-firmware/v2.2/0001-PATCH-feat-build-add-support-for-new-binutils-versio.patch

@@ -1,59 +0,0 @@
-From 5e1beb793c06352e87c46eca1144ff1fe8555103 Mon Sep 17 00:00:00 2001
-From: Heiko Thiery <heiko.thiery@gmail.com>
-Date: Mon, 10 Jul 2023 10:43:03 +0200
-Subject: [PATCH] [PATCH] feat(build): add support for new binutils versions
-
-Users of GNU ld (BPF) from binutils 2.39+ will observe multiple instaces
-of a new warning when linking the bl*.elf in the form:
-
-  ld.bfd: warning: stm32mp1_helper.o: missing .note.GNU-stack section implies executable stack
-  ld.bfd: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
-  ld.bfd: warning: bl2.elf has a LOAD segment with RWX permissions
-  ld.bfd: warning: bl32.elf has a LOAD segment with RWX permissions
-
-These new warnings are enbaled by default to secure elf binaries:
- - https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ba951afb99912da01a6e8434126b8fac7aa75107
- - https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=0d38576a34ec64a1b4500c9277a8e9d0f07e6774
-
-Fix it in a similar way to what the Linux kernel does, see:
-https://lore.kernel.org/all/20220810222442.2296651-1-ndesaulniers@google.com/
-
-Following the reasoning there, we set "-z noexecstack" for all linkers
-(although LLVM's LLD defaults to it) and optional add
---no-warn-rwx-segments since this a ld.bfd related.
-
-Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
-Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
-Change-Id: I9430f5fa5036ca88da46cd3b945754d62616b617
-
-Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
-Upstream: https://github.com/ARM-software/arm-trusted-firmware/commit/1f49db5f25cdd4e43825c9bcc0575070b80f628c
----
- Makefile | 7 ++++++-
- 1 file changed, 6 insertions(+), 1 deletion(-)
-
-diff --git a/Makefile b/Makefile
-index 721246d51..5893cf422 100644
---- a/Makefile
-+++ b/Makefile
-@@ -297,11 +297,16 @@ endif
- 
- GCC_V_OUTPUT		:=	$(shell $(CC) -v 2>&1)
- 
-+TF_LDFLAGS              +=      -z noexecstack
-+
- ifneq ($(findstring armlink,$(notdir $(LD))),)
- TF_LDFLAGS		+=	--diag_error=warning --lto_level=O1
- TF_LDFLAGS		+=	--remove --info=unused,unusedsymbols
- else
--TF_LDFLAGS		+=	--fatal-warnings -O1
-+# With ld.bfd version 2.39 and newer new warnings are added. Skip those since we
-+# are not loaded by a elf loader.
-+TF_LDFLAGS              +=      $(call ld_option, --no-warn-rwx-segments)
-+TF_LDFLAGS              +=      -O1
- TF_LDFLAGS		+=	--gc-sections
- endif
- TF_LDFLAGS		+=	$(TF_LDFLAGS_$(ARCH))
--- 
-2.30.2
-

boot/arm-trusted-firmware/v2.3/0001-feat-build-add-support-for-new-binutils-versions.patch

@@ -1,61 +0,0 @@
-From 0f75b03c008eacb9818af3a56dc088e72a623d17 Mon Sep 17 00:00:00 2001
-From: Marco Felsch <m.felsch@pengutronix.de>
-Date: Wed, 9 Nov 2022 12:59:09 +0100
-Subject: [PATCH] feat(build): add support for new binutils versions
-
-Users of GNU ld (BPF) from binutils 2.39+ will observe multiple instaces
-of a new warning when linking the bl*.elf in the form:
-
-  ld.bfd: warning: stm32mp1_helper.o: missing .note.GNU-stack section implies executable stack
-  ld.bfd: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
-  ld.bfd: warning: bl2.elf has a LOAD segment with RWX permissions
-  ld.bfd: warning: bl32.elf has a LOAD segment with RWX permissions
-
-These new warnings are enbaled by default to secure elf binaries:
- - https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ba951afb99912da01a6e8434126b8fac7aa75107
- - https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=0d38576a34ec64a1b4500c9277a8e9d0f07e6774
-
-Fix it in a similar way to what the Linux kernel does, see:
-https://lore.kernel.org/all/20220810222442.2296651-1-ndesaulniers@google.com/
-
-Following the reasoning there, we set "-z noexecstack" for all linkers
-(although LLVM's LLD defaults to it) and optional add
---no-warn-rwx-segments since this a ld.bfd related.
-
-Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
-Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
-Change-Id: I9430f5fa5036ca88da46cd3b945754d62616b617
-Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
-Upstream: https://github.com/ARM-software/arm-trusted-firmware/commit/1f49db5f25cdd4e43825c9bcc0575070b80f628c
----
- Makefile | 7 ++++++-
- 1 file changed, 6 insertions(+), 1 deletion(-)
-
-diff --git a/Makefile b/Makefile
-index 1ddb7b844..470956b19 100644
---- a/Makefile
-+++ b/Makefile
-@@ -416,6 +416,8 @@ endif
- 
- GCC_V_OUTPUT		:=	$(shell $(CC) -v 2>&1)
- 
-+TF_LDFLAGS		+=	-z noexecstack
-+
- # LD = armlink
- ifneq ($(findstring armlink,$(notdir $(LD))),)
- TF_LDFLAGS		+=	--diag_error=warning --lto_level=O1
-@@ -442,7 +444,10 @@ TF_LDFLAGS		+=	$(subst --,-Xlinker --,$(TF_LDFLAGS_$(ARCH)))
- 
- # LD = gcc-ld (ld) or llvm-ld (ld.lld) or other
- else
--TF_LDFLAGS		+=	--fatal-warnings -O1
-+# With ld.bfd version 2.39 and newer new warnings are added. Skip those since we
-+# are not loaded by a elf loader.
-+TF_LDFLAGS		+=	$(call ld_option, --no-warn-rwx-segments)
-+TF_LDFLAGS		+=	-O1
- TF_LDFLAGS		+=	--gc-sections
- # ld.lld doesn't recognize the errata flags,
- # therefore don't add those in that case
--- 
-2.30.2
-

boot/arm-trusted-firmware/v2.4/0001-feat-build-add-support-for-new-binutils-versions.patch

@@ -1,61 +0,0 @@
-From 0f75b03c008eacb9818af3a56dc088e72a623d17 Mon Sep 17 00:00:00 2001
-From: Marco Felsch <m.felsch@pengutronix.de>
-Date: Wed, 9 Nov 2022 12:59:09 +0100
-Subject: [PATCH] feat(build): add support for new binutils versions
-
-Users of GNU ld (BPF) from binutils 2.39+ will observe multiple instaces
-of a new warning when linking the bl*.elf in the form:
-
-  ld.bfd: warning: stm32mp1_helper.o: missing .note.GNU-stack section implies executable stack
-  ld.bfd: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
-  ld.bfd: warning: bl2.elf has a LOAD segment with RWX permissions
-  ld.bfd: warning: bl32.elf has a LOAD segment with RWX permissions
-
-These new warnings are enbaled by default to secure elf binaries:
- - https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ba951afb99912da01a6e8434126b8fac7aa75107
- - https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=0d38576a34ec64a1b4500c9277a8e9d0f07e6774
-
-Fix it in a similar way to what the Linux kernel does, see:
-https://lore.kernel.org/all/20220810222442.2296651-1-ndesaulniers@google.com/
-
-Following the reasoning there, we set "-z noexecstack" for all linkers
-(although LLVM's LLD defaults to it) and optional add
---no-warn-rwx-segments since this a ld.bfd related.
-
-Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
-Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
-Change-Id: I9430f5fa5036ca88da46cd3b945754d62616b617
-Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
-Upstream: https://github.com/ARM-software/arm-trusted-firmware/commit/1f49db5f25cdd4e43825c9bcc0575070b80f628c
----
- Makefile | 7 ++++++-
- 1 file changed, 6 insertions(+), 1 deletion(-)
-
-diff --git a/Makefile b/Makefile
-index 1ddb7b844..470956b19 100644
---- a/Makefile
-+++ b/Makefile
-@@ -416,6 +416,8 @@ endif
- 
- GCC_V_OUTPUT		:=	$(shell $(CC) -v 2>&1)
- 
-+TF_LDFLAGS		+=	-z noexecstack
-+
- # LD = armlink
- ifneq ($(findstring armlink,$(notdir $(LD))),)
- TF_LDFLAGS		+=	--diag_error=warning --lto_level=O1
-@@ -442,7 +444,10 @@ TF_LDFLAGS		+=	$(subst --,-Xlinker --,$(TF_LDFLAGS_$(ARCH)))
- 
- # LD = gcc-ld (ld) or llvm-ld (ld.lld) or other
- else
--TF_LDFLAGS		+=	--fatal-warnings -O1
-+# With ld.bfd version 2.39 and newer new warnings are added. Skip those since we
-+# are not loaded by a elf loader.
-+TF_LDFLAGS		+=	$(call ld_option, --no-warn-rwx-segments)
-+TF_LDFLAGS		+=	-O1
- TF_LDFLAGS		+=	--gc-sections
- # ld.lld doesn't recognize the errata flags,
- # therefore don't add those in that case
--- 
-2.30.2
-

boot/arm-trusted-firmware/v2.5/0001-feat-build-add-support-for-new-binutils-versions.patch

@@ -1,61 +0,0 @@
-From 0f75b03c008eacb9818af3a56dc088e72a623d17 Mon Sep 17 00:00:00 2001
-From: Marco Felsch <m.felsch@pengutronix.de>
-Date: Wed, 9 Nov 2022 12:59:09 +0100
-Subject: [PATCH] feat(build): add support for new binutils versions
-
-Users of GNU ld (BPF) from binutils 2.39+ will observe multiple instaces
-of a new warning when linking the bl*.elf in the form:
-
-  ld.bfd: warning: stm32mp1_helper.o: missing .note.GNU-stack section implies executable stack
-  ld.bfd: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
-  ld.bfd: warning: bl2.elf has a LOAD segment with RWX permissions
-  ld.bfd: warning: bl32.elf has a LOAD segment with RWX permissions
-
-These new warnings are enbaled by default to secure elf binaries:
- - https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ba951afb99912da01a6e8434126b8fac7aa75107
- - https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=0d38576a34ec64a1b4500c9277a8e9d0f07e6774
-
-Fix it in a similar way to what the Linux kernel does, see:
-https://lore.kernel.org/all/20220810222442.2296651-1-ndesaulniers@google.com/
-
-Following the reasoning there, we set "-z noexecstack" for all linkers
-(although LLVM's LLD defaults to it) and optional add
---no-warn-rwx-segments since this a ld.bfd related.
-
-Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
-Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
-Change-Id: I9430f5fa5036ca88da46cd3b945754d62616b617
-Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
-Upstream: https://github.com/ARM-software/arm-trusted-firmware/commit/1f49db5f25cdd4e43825c9bcc0575070b80f628c
----
- Makefile | 7 ++++++-
- 1 file changed, 6 insertions(+), 1 deletion(-)
-
-diff --git a/Makefile b/Makefile
-index 1ddb7b844..470956b19 100644
---- a/Makefile
-+++ b/Makefile
-@@ -416,6 +416,8 @@ endif
- 
- GCC_V_OUTPUT		:=	$(shell $(CC) -v 2>&1)
- 
-+TF_LDFLAGS		+=	-z noexecstack
-+
- # LD = armlink
- ifneq ($(findstring armlink,$(notdir $(LD))),)
- TF_LDFLAGS		+=	--diag_error=warning --lto_level=O1
-@@ -442,7 +444,10 @@ TF_LDFLAGS		+=	$(subst --,-Xlinker --,$(TF_LDFLAGS_$(ARCH)))
- 
- # LD = gcc-ld (ld) or llvm-ld (ld.lld) or other
- else
--TF_LDFLAGS		+=	--fatal-warnings -O1
-+# With ld.bfd version 2.39 and newer new warnings are added. Skip those since we
-+# are not loaded by a elf loader.
-+TF_LDFLAGS		+=	$(call ld_option, --no-warn-rwx-segments)
-+TF_LDFLAGS		+=	-O1
- TF_LDFLAGS		+=	--gc-sections
- # ld.lld doesn't recognize the errata flags,
- # therefore don't add those in that case
--- 
-2.30.2
-

boot/arm-trusted-firmware/v2.6/0001-feat-build-add-support-for-new-binutils-versions.patch

@@ -1,61 +0,0 @@
-From 0f75b03c008eacb9818af3a56dc088e72a623d17 Mon Sep 17 00:00:00 2001
-From: Marco Felsch <m.felsch@pengutronix.de>
-Date: Wed, 9 Nov 2022 12:59:09 +0100
-Subject: [PATCH] feat(build): add support for new binutils versions
-
-Users of GNU ld (BPF) from binutils 2.39+ will observe multiple instaces
-of a new warning when linking the bl*.elf in the form:
-
-  ld.bfd: warning: stm32mp1_helper.o: missing .note.GNU-stack section implies executable stack
-  ld.bfd: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
-  ld.bfd: warning: bl2.elf has a LOAD segment with RWX permissions
-  ld.bfd: warning: bl32.elf has a LOAD segment with RWX permissions
-
-These new warnings are enbaled by default to secure elf binaries:
- - https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ba951afb99912da01a6e8434126b8fac7aa75107
- - https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=0d38576a34ec64a1b4500c9277a8e9d0f07e6774
-
-Fix it in a similar way to what the Linux kernel does, see:
-https://lore.kernel.org/all/20220810222442.2296651-1-ndesaulniers@google.com/
-
-Following the reasoning there, we set "-z noexecstack" for all linkers
-(although LLVM's LLD defaults to it) and optional add
---no-warn-rwx-segments since this a ld.bfd related.
-
-Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
-Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
-Change-Id: I9430f5fa5036ca88da46cd3b945754d62616b617
-Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
-Upstream: https://github.com/ARM-software/arm-trusted-firmware/commit/1f49db5f25cdd4e43825c9bcc0575070b80f628c
----
- Makefile | 7 ++++++-
- 1 file changed, 6 insertions(+), 1 deletion(-)
-
-diff --git a/Makefile b/Makefile
-index 1ddb7b844..470956b19 100644
---- a/Makefile
-+++ b/Makefile
-@@ -416,6 +416,8 @@ endif
- 
- GCC_V_OUTPUT		:=	$(shell $(CC) -v 2>&1)
- 
-+TF_LDFLAGS		+=	-z noexecstack
-+
- # LD = armlink
- ifneq ($(findstring armlink,$(notdir $(LD))),)
- TF_LDFLAGS		+=	--diag_error=warning --lto_level=O1
-@@ -442,7 +444,10 @@ TF_LDFLAGS		+=	$(subst --,-Xlinker --,$(TF_LDFLAGS_$(ARCH)))
- 
- # LD = gcc-ld (ld) or llvm-ld (ld.lld) or other
- else
--TF_LDFLAGS		+=	--fatal-warnings -O1
-+# With ld.bfd version 2.39 and newer new warnings are added. Skip those since we
-+# are not loaded by a elf loader.
-+TF_LDFLAGS		+=	$(call ld_option, --no-warn-rwx-segments)
-+TF_LDFLAGS		+=	-O1
- TF_LDFLAGS		+=	--gc-sections
- # ld.lld doesn't recognize the errata flags,
- # therefore don't add those in that case
--- 
-2.30.2
-

boot/arm-trusted-firmware/v2.7/0001-feat-build-add-support-for-new-binutils-versions.patch

@@ -1,61 +0,0 @@
-From 0f75b03c008eacb9818af3a56dc088e72a623d17 Mon Sep 17 00:00:00 2001
-From: Marco Felsch <m.felsch@pengutronix.de>
-Date: Wed, 9 Nov 2022 12:59:09 +0100
-Subject: [PATCH] feat(build): add support for new binutils versions
-
-Users of GNU ld (BPF) from binutils 2.39+ will observe multiple instaces
-of a new warning when linking the bl*.elf in the form:
-
-  ld.bfd: warning: stm32mp1_helper.o: missing .note.GNU-stack section implies executable stack
-  ld.bfd: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
-  ld.bfd: warning: bl2.elf has a LOAD segment with RWX permissions
-  ld.bfd: warning: bl32.elf has a LOAD segment with RWX permissions
-
-These new warnings are enbaled by default to secure elf binaries:
- - https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ba951afb99912da01a6e8434126b8fac7aa75107
- - https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=0d38576a34ec64a1b4500c9277a8e9d0f07e6774
-
-Fix it in a similar way to what the Linux kernel does, see:
-https://lore.kernel.org/all/20220810222442.2296651-1-ndesaulniers@google.com/
-
-Following the reasoning there, we set "-z noexecstack" for all linkers
-(although LLVM's LLD defaults to it) and optional add
---no-warn-rwx-segments since this a ld.bfd related.
-
-Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
-Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
-Change-Id: I9430f5fa5036ca88da46cd3b945754d62616b617
-Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
-Upstream: https://github.com/ARM-software/arm-trusted-firmware/commit/1f49db5f25cdd4e43825c9bcc0575070b80f628c
----
- Makefile | 7 ++++++-
- 1 file changed, 6 insertions(+), 1 deletion(-)
-
-diff --git a/Makefile b/Makefile
-index 1ddb7b844..470956b19 100644
---- a/Makefile
-+++ b/Makefile
-@@ -416,6 +416,8 @@ endif
- 
- GCC_V_OUTPUT		:=	$(shell $(CC) -v 2>&1)
- 
-+TF_LDFLAGS		+=	-z noexecstack
-+
- # LD = armlink
- ifneq ($(findstring armlink,$(notdir $(LD))),)
- TF_LDFLAGS		+=	--diag_error=warning --lto_level=O1
-@@ -442,7 +444,10 @@ TF_LDFLAGS		+=	$(subst --,-Xlinker --,$(TF_LDFLAGS_$(ARCH)))
- 
- # LD = gcc-ld (ld) or llvm-ld (ld.lld) or other
- else
--TF_LDFLAGS		+=	--fatal-warnings -O1
-+# With ld.bfd version 2.39 and newer new warnings are added. Skip those since we
-+# are not loaded by a elf loader.
-+TF_LDFLAGS		+=	$(call ld_option, --no-warn-rwx-segments)
-+TF_LDFLAGS		+=	-O1
- TF_LDFLAGS		+=	--gc-sections
- # ld.lld doesn't recognize the errata flags,
- # therefore don't add those in that case
--- 
-2.30.2
-

boot/arm-trusted-firmware/v2.8/0001-feat-build-add-support-for-new-binutils-versions.patch

@@ -1,61 +0,0 @@
-From 0f75b03c008eacb9818af3a56dc088e72a623d17 Mon Sep 17 00:00:00 2001
-From: Marco Felsch <m.felsch@pengutronix.de>
-Date: Wed, 9 Nov 2022 12:59:09 +0100
-Subject: [PATCH] feat(build): add support for new binutils versions
-
-Users of GNU ld (BPF) from binutils 2.39+ will observe multiple instaces
-of a new warning when linking the bl*.elf in the form:
-
-  ld.bfd: warning: stm32mp1_helper.o: missing .note.GNU-stack section implies executable stack
-  ld.bfd: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
-  ld.bfd: warning: bl2.elf has a LOAD segment with RWX permissions
-  ld.bfd: warning: bl32.elf has a LOAD segment with RWX permissions
-
-These new warnings are enbaled by default to secure elf binaries:
- - https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ba951afb99912da01a6e8434126b8fac7aa75107
- - https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=0d38576a34ec64a1b4500c9277a8e9d0f07e6774
-
-Fix it in a similar way to what the Linux kernel does, see:
-https://lore.kernel.org/all/20220810222442.2296651-1-ndesaulniers@google.com/
-
-Following the reasoning there, we set "-z noexecstack" for all linkers
-(although LLVM's LLD defaults to it) and optional add
---no-warn-rwx-segments since this a ld.bfd related.
-
-Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
-Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
-Change-Id: I9430f5fa5036ca88da46cd3b945754d62616b617
-Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
-Upstream: https://github.com/ARM-software/arm-trusted-firmware/commit/1f49db5f25cdd4e43825c9bcc0575070b80f628c
----
- Makefile | 7 ++++++-
- 1 file changed, 6 insertions(+), 1 deletion(-)
-
-diff --git a/Makefile b/Makefile
-index 1ddb7b844..470956b19 100644
---- a/Makefile
-+++ b/Makefile
-@@ -416,6 +416,8 @@ endif
- 
- GCC_V_OUTPUT		:=	$(shell $(CC) -v 2>&1)
- 
-+TF_LDFLAGS		+=	-z noexecstack
-+
- # LD = armlink
- ifneq ($(findstring armlink,$(notdir $(LD))),)
- TF_LDFLAGS		+=	--diag_error=warning --lto_level=O1
-@@ -442,7 +444,10 @@ TF_LDFLAGS		+=	$(subst --,-Xlinker --,$(TF_LDFLAGS_$(ARCH)))
- 
- # LD = gcc-ld (ld) or llvm-ld (ld.lld) or other
- else
--TF_LDFLAGS		+=	--fatal-warnings -O1
-+# With ld.bfd version 2.39 and newer new warnings are added. Skip those since we
-+# are not loaded by a elf loader.
-+TF_LDFLAGS		+=	$(call ld_option, --no-warn-rwx-segments)
-+TF_LDFLAGS		+=	-O1
- TF_LDFLAGS		+=	--gc-sections
- # ld.lld doesn't recognize the errata flags,
- # therefore don't add those in that case
--- 
-2.30.2
-

boot/arm-trusted-firmware/v2.8/0002-build-tools-avoid-unnecessary-link.patch

@@ -1,77 +0,0 @@
-From aa57ce632c629fe72ff417e261e0f5bfd8db6bab Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Vincent=20Stehl=C3=A9?= <vincent.stehle@arm.com>
-Date: Tue, 4 Jul 2023 16:14:02 +0200
-Subject: [PATCH] build(tools): avoid unnecessary link
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-In their respective makefiles, cert_create, encrypt_fw and fiptool
-depend on the --openssl phony target as a prerequisite. This forces
-those tools to be re-linked each time.
-
-Move the dependencies on the --openssl target from the tools to their
-makefiles all targets, to avoid unnecessary linking while preserving the
-OpenSSL version printing done in the --openssl targets when in debug.
-
-Fixes: cf2dd17ddda2 ("refactor(security): add OpenSSL 1.x compatibility")
-Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
-Change-Id: I98a3ab30f36dffc253cecaaf3a57d2712522135d
-Upstream: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=aa57ce632c629fe72ff417e261e0f5bfd8db6bab
----
- tools/cert_create/Makefile | 4 ++--
- tools/encrypt_fw/Makefile  | 4 ++--
- tools/fiptool/Makefile     | 4 ++--
- 3 files changed, 6 insertions(+), 6 deletions(-)
-
-diff --git a/tools/cert_create/Makefile b/tools/cert_create/Makefile
-index 042e844626..b911d19d2b 100644
---- a/tools/cert_create/Makefile
-+++ b/tools/cert_create/Makefile
-@@ -85,9 +85,9 @@ HOSTCC ?= gcc
- 
- .PHONY: all clean realclean --openssl
- 
--all: ${BINARY}
-+all: --openssl ${BINARY}
- 
--${BINARY}: --openssl ${OBJECTS} Makefile
-+${BINARY}: ${OBJECTS} Makefile
- 	@echo "  HOSTLD  $@"
- 	@echo 'const char build_msg[] = "Built : "__TIME__", "__DATE__; \
-                 const char platform_msg[] = "${PLAT_MSG}";' | \
-diff --git a/tools/encrypt_fw/Makefile b/tools/encrypt_fw/Makefile
-index 2939b142be..924e5febab 100644
---- a/tools/encrypt_fw/Makefile
-+++ b/tools/encrypt_fw/Makefile
-@@ -65,9 +65,9 @@ HOSTCC ?= gcc
- 
- .PHONY: all clean realclean --openssl
- 
--all: ${BINARY}
-+all: --openssl ${BINARY}
- 
--${BINARY}: --openssl ${OBJECTS} Makefile
-+${BINARY}: ${OBJECTS} Makefile
- 	@echo "  HOSTLD  $@"
- 	@echo 'const char build_msg[] = "Built : "__TIME__", "__DATE__;' | \
-                 ${HOSTCC} -c ${HOSTCCFLAGS} -xc - -o src/build_msg.o
-diff --git a/tools/fiptool/Makefile b/tools/fiptool/Makefile
-index 2ebee33931..4bdebd9235 100644
---- a/tools/fiptool/Makefile
-+++ b/tools/fiptool/Makefile
-@@ -68,9 +68,9 @@ DEPS := $(patsubst %.o,%.d,$(OBJECTS))
- 
- .PHONY: all clean distclean --openssl
- 
--all: ${PROJECT}
-+all: --openssl ${PROJECT}
- 
--${PROJECT}: --openssl ${OBJECTS} Makefile
-+${PROJECT}: ${OBJECTS} Makefile
- 	@echo "  HOSTLD  $@"
- 	${Q}${HOSTCC} ${OBJECTS} -o $@ ${LDLIBS}
- 	@${ECHO_BLANK_LINE}
--- 
-2.25.1
-

boot/arm-trusted-firmware/v2.9/0001-build-tools-avoid-unnecessary-link.patch

@@ -1,77 +0,0 @@
-From aa57ce632c629fe72ff417e261e0f5bfd8db6bab Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Vincent=20Stehl=C3=A9?= <vincent.stehle@arm.com>
-Date: Tue, 4 Jul 2023 16:14:02 +0200
-Subject: [PATCH] build(tools): avoid unnecessary link
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-In their respective makefiles, cert_create, encrypt_fw and fiptool
-depend on the --openssl phony target as a prerequisite. This forces
-those tools to be re-linked each time.
-
-Move the dependencies on the --openssl target from the tools to their
-makefiles all targets, to avoid unnecessary linking while preserving the
-OpenSSL version printing done in the --openssl targets when in debug.
-
-Fixes: cf2dd17ddda2 ("refactor(security): add OpenSSL 1.x compatibility")
-Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
-Change-Id: I98a3ab30f36dffc253cecaaf3a57d2712522135d
-Upstream: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=aa57ce632c629fe72ff417e261e0f5bfd8db6bab
----
- tools/cert_create/Makefile | 4 ++--
- tools/encrypt_fw/Makefile  | 4 ++--
- tools/fiptool/Makefile     | 4 ++--
- 3 files changed, 6 insertions(+), 6 deletions(-)
-
-diff --git a/tools/cert_create/Makefile b/tools/cert_create/Makefile
-index 042e844626..b911d19d2b 100644
---- a/tools/cert_create/Makefile
-+++ b/tools/cert_create/Makefile
-@@ -85,9 +85,9 @@ HOSTCC ?= gcc
- 
- .PHONY: all clean realclean --openssl
- 
--all: ${BINARY}
-+all: --openssl ${BINARY}
- 
--${BINARY}: --openssl ${OBJECTS} Makefile
-+${BINARY}: ${OBJECTS} Makefile
- 	@echo "  HOSTLD  $@"
- 	@echo 'const char build_msg[] = "Built : "__TIME__", "__DATE__; \
-                 const char platform_msg[] = "${PLAT_MSG}";' | \
-diff --git a/tools/encrypt_fw/Makefile b/tools/encrypt_fw/Makefile
-index 2939b142be..924e5febab 100644
---- a/tools/encrypt_fw/Makefile
-+++ b/tools/encrypt_fw/Makefile
-@@ -65,9 +65,9 @@ HOSTCC ?= gcc
- 
- .PHONY: all clean realclean --openssl
- 
--all: ${BINARY}
-+all: --openssl ${BINARY}
- 
--${BINARY}: --openssl ${OBJECTS} Makefile
-+${BINARY}: ${OBJECTS} Makefile
- 	@echo "  HOSTLD  $@"
- 	@echo 'const char build_msg[] = "Built : "__TIME__", "__DATE__;' | \
-                 ${HOSTCC} -c ${HOSTCCFLAGS} -xc - -o src/build_msg.o
-diff --git a/tools/fiptool/Makefile b/tools/fiptool/Makefile
-index 2ebee33931..4bdebd9235 100644
---- a/tools/fiptool/Makefile
-+++ b/tools/fiptool/Makefile
-@@ -68,9 +68,9 @@ DEPS := $(patsubst %.o,%.d,$(OBJECTS))
- 
- .PHONY: all clean distclean --openssl
- 
--all: ${PROJECT}
-+all: --openssl ${PROJECT}
- 
--${PROJECT}: --openssl ${OBJECTS} Makefile
-+${PROJECT}: ${OBJECTS} Makefile
- 	@echo "  HOSTLD  $@"
- 	${Q}${HOSTCC} ${OBJECTS} -o $@ ${LDLIBS}
- 	@${ECHO_BLANK_LINE}
--- 
-2.25.1
-

boot/at91dataflashboot/at91dataflashboot.mk

@@ -11,14 +11,9 @@ AT91DATAFLASHBOOT_SITE = ftp://www.at91.com/pub/buildroot
 AT91DATAFLASHBOOT_INSTALL_TARGET = NO
 AT91DATAFLASHBOOT_INSTALL_IMAGES = YES
 
-AT91DATAFLASHBOOT_CFLAGS = $(TARGET_CFLAGS) -fno-stack-protector
-ifeq ($(BR2_ARM_INSTRUCTIONS_THUMB),y)
-AT91DATAFLASHBOOT_CFLAGS += -marm
-endif
-
 define AT91DATAFLASHBOOT_BUILD_CMDS
 	make -C $(@D) CROSS_COMPILE=$(TARGET_CROSS) \
-		CFLAGS="$(AT91DATAFLASHBOOT_CFLAGS)"
+		CFLAGS="$(TARGET_CFLAGS) -fno-stack-protector"
 endef
 
 define AT91DATAFLASHBOOT_INSTALL_IMAGES_CMDS

boot/barebox/Config.in

@@ -54,18 +54,6 @@ config BR2_TARGET_BAREBOX_CUSTOM_PATCH_DIR
 
 	  Most users may leave this empty
 
-config BR2_TARGET_BAREBOX_NEEDS_OPENSSL
-	bool "Barebox needs OpenSSL"
-	help
-	  Select this option if your Barebox board configuration
-	  requires OpenSSL to be available on the host.
-
-config BR2_TARGET_BAREBOX_NEEDS_LIBUSB
-	bool "Barebox needs LibUSB"
-	help
-	  Select this option if your Barebox board configuration
-	  requires libUSB to be available on the host.
-
 if BR2_TARGET_BAREBOX_CUSTOM_GIT
 
 config BR2_TARGET_BAREBOX_CUSTOM_GIT_REPO_URL

boot/barebox/barebox.mk

@@ -43,14 +43,6 @@ ifeq ($(BR2_TARGET_BAREBOX_LATEST_VERSION),y)
 $(1)_LICENSE_FILES = COPYING
 endif
 
-ifeq ($(BR2_TARGET_BAREBOX_NEEDS_OPENSSL),y)
-BAREBOX_DEPENDENCIES += host-openssl host-pkgconf
-endif
-
-ifeq ($(BR2_TARGET_BAREBOX_NEEDS_LIBUSB),y)
-BAREBOX_DEPENDENCIES += host-libusb host-pkgconf
-endif
-
 $(1)_CUSTOM_EMBEDDED_ENV_PATH = $$(call qstrip,$$(BR2_TARGET_$(1)_CUSTOM_EMBEDDED_ENV_PATH))
 
 ifneq ($$(call qstrip,$$(BR2_TARGET_BAREBOX_CUSTOM_PATCH_DIR)),)
@@ -81,12 +73,6 @@ endif
 
 $(1)_MAKE_FLAGS = ARCH=$$($(1)_ARCH) CROSS_COMPILE="$$(TARGET_CROSS)"
 $(1)_MAKE_ENV = $$(TARGET_MAKE_ENV)
-$(1)_MAKE_ENV += \
-	PKG_CONFIG="$(PKG_CONFIG_HOST_BINARY)" \
-	PKG_CONFIG_SYSROOT_DIR="/" \
-	PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 \
-	PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 \
-	PKG_CONFIG_LIBDIR="$(HOST_DIR)/lib/pkgconfig:$(HOST_DIR)/share/pkgconfig"
 
 ifeq ($$(BR2_REPRODUCIBLE),y)
 $(1)_MAKE_ENV += \

boot/edk2/Config.in

@@ -108,21 +108,6 @@ comment "QEMU SBSA depends on ATF not using EDK2 as BL33"
 
 endchoice
 
-config BR2_TARGET_EDK2_OVMF_DEBUG_ON_SERIAL
-	bool "OVMF Debug on Serial"
-	depends on BR2_ENABLE_DEBUG
-	depends on BR2_TARGET_EDK2_PLATFORM_OVMF_I386 || \
-		BR2_TARGET_EDK2_PLATFORM_OVMF_X64
-	help
-	  When EDK2 OVMF is built with debug, messages are printed to
-	  IO port 0x402. Those messages are not shown in the normal
-	  Qemu emulated serial port. Enabling this option will print
-	  debug messages on the emulated serial port, potentially
-	  mixing messages with UEFI serial console output.
-
-	  See OVMF README:
-	  https://github.com/tianocore/edk2/blob/master/OvmfPkg/README
-
 config BR2_TARGET_EDK2_FD_NAME
 	string
 	default "OVMF" if BR2_TARGET_EDK2_PLATFORM_OVMF_I386

boot/edk2/edk2.hash

@@ -1,3 +1,3 @@
 # Locally calculated
-sha256  ca55351913e6258ebd8c08106f369ac71073d9cfaa80427fc5f131b06d808940  edk2-edk2-stable202305-br1.tar.gz
+sha256  c10520f269557d566e35fe8104141aa2865f9085ad2b3a30aae8a7e78a3ca5aa  edk2-edk2-stable202208-br1.tar.gz
 sha256  50ce20c9cfdb0e19ee34fe0a51fc0afe961f743697b068359ab2f862b494df80  License.txt

boot/edk2/edk2.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-EDK2_VERSION = edk2-stable202305
+EDK2_VERSION = edk2-stable202208
 EDK2_SITE = https://github.com/tianocore/edk2
 EDK2_SITE_METHOD = git
 EDK2_LICENSE = BSD-2-Clause-Patent
@@ -16,15 +16,8 @@ EDK2_INSTALL_IMAGES = YES
 
 ifeq ($(BR2_ENABLE_DEBUG),y)
 EDK2_BUILD_TYPE = DEBUG
-ifeq ($(BR2_TARGET_EDK2_OVMF_DEBUG_ON_SERIAL),y)
-# DEBUG_ON_SERIAL_PORT is only tested to be set, so don't disable it, as
-# it would still be set.
-EDK2_BUILD_OPTS += -DDEBUG_ON_SERIAL_PORT
-endif
 else
 EDK2_BUILD_TYPE = RELEASE
-# DEBUG_ON_SERIAL_PORT is only valid in debug builds, so useless to set
-# it (enabled or disabled) on a relase build.
 endif
 
 # Build system notes.

boot/lpc32xxcdl/0001-compiler_name.patch

@@ -0,0 +1,52 @@
+Use CROSS_COMPILE as compiler name and stop using libc
+
+Signed-off-by: Alexandre Belloni <abelloni@adeneo-embedded.com>
+---
+ makerule/lpc32xx/make.lpc32xx.gnu |   22 +++++++++++-----------
+ 1 files changed, 11 insertions(+), 11 deletions(-)
+
+diff --git a/makerule/lpc32xx/make.lpc32xx.gnu b/makerule/lpc32xx/make.lpc32xx.gnu
+index 1014c28..3277d99 100644
+--- a/makerule/lpc32xx/make.lpc32xx.gnu
++++ b/makerule/lpc32xx/make.lpc32xx.gnu
+@@ -27,19 +27,19 @@ CFLAGS   += -mno-sched-prolog -fno-hosted -mno-thumb-interwork -ffunction-sectio
+ CFLAGS   += -I$(CSP_INC_DIR) -I$(BSP_INC_DIR) -I$(GEN_INC_DIR)
+ AFLAGS   = -mcpu=arm926ej-s
+ AFLAGS   += -I$(CSP_INC_DIR) -I$(BSP_INC_DIR) -I$(GEN_INC_DIR)
+-CC       = arm-none-eabi-gcc
+-AS       = arm-none-eabi-as
+-AR       = arm-none-eabi-ar -r
+-LD       = arm-none-eabi-gcc
+-NM       = arm-none-eabi-nm
+-OBJDUMP  = arm-none-eabi-objdump
+-OBJCOPY  = arm-none-eabi-objcopy
+-READELF  = arm-none-eabi-readelf
++CC       = $(CROSS_COMPILE)gcc
++AS       = $(CROSS_COMPILE)as
++AR       = $(CROSS_COMPILE)ar -r
++LD       = $(CROSS_COMPILE)gcc
++NM       = $(CROSS_COMPILE)nm
++OBJDUMP  = $(CROSS_COMPILE)objdump
++OBJCOPY  = $(CROSS_COMPILE)objcopy
++READELF  = $(CROSS_COMPILE)readelf
+ LDFLAGS  += -Wl,--gc-sections
+ 
+ LK       =  -static
+ LK       += -Wl,--start-group $(TARGET_CSP_LIB) $(TARGET_BSP_LIB) $(TARGET_GEN_LIB)
+-LK       +=  -lgcc -lc -lg -lm -lstdc++ -lsupc++ 
++LK       +=  -nostdlib -lgcc #-lc -lg -lm -lstdc++ -lsupc++ 
+ LK       += -Wl,--end-group
+ MAP      = -Xlinker -Map -Xlinker
+ LDESC    = -Xlinker -T  
+@@ -47,6 +47,6 @@ ENTRY    = -e
+ BIN      = -bin
+ EXT      = .elf
+ LEXT     = 
+-ELFTOREC =arm-none-eabi-objcopy -O srec --strip-all --verbose
+-ELFTOBIN =arm-none-eabi-objcopy -I elf32-littlearm -O binary --strip-all --verbose
++ELFTOREC = $(OBJCOPY) -O srec --strip-all --verbose
++ELFTOBIN = $(OBJCOPY) -I elf32-littlearm -O binary --strip-all --verbose
+ REC      =.srec
+-- 
+1.7.7.3
+

boot/lpc32xxcdl/0002-delete_redundant_files.patch

@@ -0,0 +1,969 @@
+Remove duplicated files to stop the linker from complaining about duplicate
+symbols
+
+Signed-off-by: Alexandre Belloni <abelloni@adeneo-embedded.com>
+---
+--- a/csps/lpc32xx/bsps/fdi3250/startup/examples/s1l/sysapi_timer.c	2011-10-05 19:10:37.000000000 +0200
++++ /dev/null	2012-01-01 16:39:47.918907000 +0100
+@@ -1,212 +0,0 @@
+-/***********************************************************************
+- * $Id:: sysapi_timer.c 3394 2010-05-06 17:56:27Z usb10132             $
+- *
+- * Project: Time support functions
+- *
+- * Description:
+- *     Implements the following functions required for the S1L API
+- *         time_init
+- *         time_reset
+- *         time_start
+- *         time_stop
+- *         time_get
+- *         time_get_rate
+- *
+- ***********************************************************************
+- * Software that is described herein is for illustrative purposes only  
+- * which provides customers with programming information regarding the  
+- * products. This software is supplied "AS IS" without any warranties.  
+- * NXP Semiconductors assumes no responsibility or liability for the 
+- * use of the software, conveys no license or title under any patent, 
+- * copyright, or mask work right to the product. NXP Semiconductors 
+- * reserves the right to make changes in the software without 
+- * notification. NXP Semiconductors also make no representation or 
+- * warranty that such application will be suitable for the specified 
+- * use without further testing or modification. 
+- **********************************************************************/
+-
+-#include "s1l_sys_inf.h"
+-#include "lpc32xx_intc_driver.h"
+-#include "lpc32xx_timer_driver.h"
+-
+-static UNS_64 base_rate;
+-static INT_32 tdev = 0;
+-
+-/***********************************************************************
+- *
+- * Function: time_init
+- *
+- * Purpose: Initializes time system
+- *
+- * Processing: Initializes the system timer.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: 0 if the init failed, otherwise non-zero
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-INT_32 time_init(void)
+-{
+-	TMR_PSCALE_SETUP_T pscale;
+-
+-	/* Open timer driver */
+-	if (tdev == 0)
+-	{
+-		tdev = timer_open((void *) TIMER_CNTR0, 0);
+-		if (tdev != 0)
+-		{
+-			/* Use a prescale count to 100000 */
+-			pscale.ps_tick_val = 100000;
+-			pscale.ps_us_val = 0; /* Not needed when ps_tick_val != 0 */
+-			timer_ioctl(tdev, TMR_SETUP_PSCALE, (INT_32) &pscale);
+-
+-			/* Get timer clock rate */
+-			base_rate = (UNS_64) timer_ioctl(tdev, TMR_GET_STATUS,
+-				TMR_GET_CLOCK);
+-		}
+-	}
+-
+-	return tdev;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: time_reset
+- *
+- * Purpose: Resets system timer
+- *
+- * Processing:
+- *     See function.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: Nothing
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-void time_reset(void)
+-{
+-	if (tdev != 0)
+-	{
+-		timer_ioctl(tdev, TMR_RESET, 1);
+-	}
+-}
+-
+-/***********************************************************************
+- *
+- * Function: time_start
+- *
+- * Purpose: Starts system timer
+- *
+- * Processing:
+- *     See function.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: Nothing
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-void time_start(void)
+-{
+-	if (tdev != 0)
+-	{
+-		timer_ioctl(tdev, TMR_ENABLE, 1);
+-	}
+-}
+-
+-/***********************************************************************
+- *
+- * Function: time_stop
+- *
+- * Purpose: Stops system timer
+- *
+- * Processing:
+- *     See function.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: Nothing
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-void time_stop(void)
+-{
+-	if (tdev != 0)
+-	{
+-		timer_ioctl(tdev, TMR_ENABLE, 0);
+-	}
+-}
+-
+-/***********************************************************************
+- *
+- * Function: time_get
+- *
+- * Purpose: Returns current system time value
+- *
+- * Processing:
+- *     See function.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: The number of ticks of the timer counter
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-UNS_64 time_get(void)
+-{
+-	TMR_COUNTS_T tcounts;
+-	UNS_64 ticks = 0;
+-
+-	if (tdev != 0)
+-	{
+-		timer_ioctl(tdev, TMR_GET_COUNTS, (INT_32) &tcounts);
+-
+-		/* Compute number of timer ticks */
+-		ticks = (UNS_64) tcounts.count_val * 100000;
+-		ticks = ticks + (UNS_64) tcounts.ps_count_val;
+-	}
+-
+-	return ticks;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: time_get_rate
+- *
+- * Purpose:
+- *     Returns base tick rate (ticks per second) of the time counter
+- *
+- * Processing:
+- *     See function.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: The timer tick rate (in ticks per second)
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-UNS_64 time_get_rate(void)
+-{
+-	return base_rate;
+-}
+-
+--- a/csps/lpc32xx/bsps/fdi3250/startup/examples/s1l/sys_mmu_cmd_group.c	2011-10-05 19:10:37.000000000 +0200
++++ /dev/null	2012-01-01 16:39:47.918907000 +0100
+@@ -1,746 +0,0 @@
+-/***********************************************************************
+- * $Id:: sys_mmu_cmd_group.c 3430 2010-05-07 17:39:08Z usb10132        $
+- *
+- * Project: Command processor for peek, poke, dump, and fill
+- *
+- * Description:
+- *     Processes commands from the command prompt
+- *
+- ***********************************************************************
+- * Software that is described herein is for illustrative purposes only  
+- * which provides customers with programming information regarding the  
+- * products. This software is supplied "AS IS" without any warranties.  
+- * NXP Semiconductors assumes no responsibility or liability for the 
+- * use of the software, conveys no license or title under any patent, 
+- * copyright, or mask work right to the product. NXP Semiconductors 
+- * reserves the right to make changes in the software without 
+- * notification. NXP Semiconductors also make no representation or 
+- * warranty that such application will be suitable for the specified 
+- * use without further testing or modification. 
+- **********************************************************************/
+-
+-#include "lpc_arm922t_cp15_driver.h"
+-#include "lpc_string.h"
+-#include "startup.h"
+-#include "s1l_cmds.h"
+-#include "s1l_sys_inf.h"
+-
+-/* dcache command */
+-BOOL_32 cmd_dcache(void);
+-static UNS_32 cmd_dcache_plist[] =
+-{
+-	(PARSE_TYPE_STR), /* The "dcache" command */
+-	(PARSE_TYPE_DEC | PARSE_TYPE_END)
+-};
+-static CMD_ROUTE_T core_dcache_cmd =
+-{
+-	(UNS_8 *) "dcache",
+-	cmd_dcache,
+-	(UNS_8 *) "Enables, disables, or flushes data cache",
+-	(UNS_8 *) "dcache [0(disable), 1(enable), 2(flush)]",
+-	cmd_dcache_plist,
+-	NULL
+-};
+-
+-/* icache command */
+-BOOL_32 cmd_icache(void);
+-static UNS_32 cmd_icache_plist[] =
+-{
+-	(PARSE_TYPE_STR), /* The "icache" command */
+-	(PARSE_TYPE_DEC | PARSE_TYPE_END)
+-};
+-static CMD_ROUTE_T core_icache_cmd =
+-{
+-	(UNS_8 *) "icache",
+-	cmd_icache,
+-	(UNS_8 *) "Enables or disables instruction cache",
+-	(UNS_8 *) "icache [0(disable), 1(enable)]",
+-	cmd_icache_plist,
+-	NULL
+-};
+-
+-/* inval command */
+-BOOL_32 cmd_inval(void);
+-static UNS_32 cmd_inval_plist[] =
+-{
+-	(PARSE_TYPE_STR | PARSE_TYPE_END) /* The "inval" command */
+-};
+-static CMD_ROUTE_T core_inval_cmd =
+-{
+-	(UNS_8 *) "inval",
+-	cmd_inval,
+-	(UNS_8 *) "Flushes data cache and invalidates instruction cache",
+-	(UNS_8 *) "inval",
+-	cmd_inval_plist,
+-	NULL
+-};
+-
+-/* mmuenab command */
+-BOOL_32 cmd_mmuenab(void);
+-static UNS_32 cmd_mmuenab_plist[] =
+-{
+-	(PARSE_TYPE_STR), /* The "mmuenab" command */
+-	(PARSE_TYPE_DEC | PARSE_TYPE_END)
+-};
+-static CMD_ROUTE_T core_mmuenab_cmd =
+-{
+-	(UNS_8 *) "mmuenab",
+-	cmd_mmuenab,
+-	(UNS_8 *) "Enables or disables the MMU",
+-	(UNS_8 *) "mmuenab [0(disable), 1(enable)]",
+-	cmd_mmuenab_plist,
+-	NULL
+-};
+-
+-/* map command */
+-BOOL_32 cmd_map(void);
+-static UNS_32 cmd_map_plist[] =
+-{
+-	(PARSE_TYPE_STR), /* The "map" command */
+-	(PARSE_TYPE_HEX),
+-	(PARSE_TYPE_HEX),
+-	(PARSE_TYPE_DEC),
+-	(PARSE_TYPE_DEC | PARSE_TYPE_END),
+-};
+-static CMD_ROUTE_T core_map_cmd =
+-{
+-	(UNS_8 *) "map",
+-	cmd_map,
+-	(UNS_8 *) "Maps a range of physical address sections to virtual addresses",
+-	(UNS_8 *) "map [virt hex addr][phy hex addr][sections][0(uncached), 1(cached), 2(unmap)]",
+-	cmd_map_plist,
+-	NULL
+-};
+-
+-/* mmuinfo command */
+-static BOOL_32 cmd_mmuinfo(void);
+-static UNS_32 cmd_mmuinfo_plist[] =
+-{
+-	(PARSE_TYPE_STR | PARSE_TYPE_END) /* The "mmuinfo" command */
+-};
+-static CMD_ROUTE_T core_mmuinfo_cmd =
+-{
+-	(UNS_8 *) "mmuinfo",
+-	cmd_mmuinfo,
+-	(UNS_8 *) "Dumps page table and MMU info",
+-	(UNS_8 *) "mmuinfo",
+-	cmd_mmuinfo_plist,
+-	NULL
+-};
+-
+-/* MMU group */
+-static GROUP_LIST_T mmu_group =
+-{
+-	(UNS_8 *) "mmu", /* mmu group */
+-	(UNS_8 *) "MMU command group",
+-	NULL,
+-	NULL
+-};
+-
+-static UNS_8 enabled_msg [] =" enabled";
+-static UNS_8 disabled_msg [] =" disabled";
+-static UNS_8 dcache_msg[] = "Data cache";
+-static UNS_8 icache_msg[] = "Instruction cache";
+-static UNS_8 pagetab_msg[] = "Page table at address: ";
+-static UNS_8 slist_msg[] = "Type        Virt       Phy        fl Size";
+-static UNS_8 mmu_msg [] ="MMU";
+-static UNS_8 cpage_msg[] = "Coarse page:";
+-static UNS_8 fpage_msg[] = "Fine page  :";
+-static UNS_8 sect_msg[] =  "Section    :";
+-static UNS_8 mbytes_msg[] = "M";
+-static UNS_8 map1_err_msg[] =
+-	"Error : section addresses must be aligned on a 32-bit boundary";
+-static UNS_8 map2_err_msg[] =
+-	"Error : Number of sections exceeds address range of device";
+-static UNS_8 phya_msg[] = "Virtual address ";
+-static UNS_8 mapped_msg[] = " mapped to physical address ";
+-static UNS_8 unmapped_msg[] = " unmapped from physical address ";
+-static UNS_8 cached_msg[] = " (cached)";
+-static UNS_8 inval_msg[] = " invalidated";
+-static UNS_8 caches_msg [] ="Caches";
+-static UNS_8 flushed_msg[] = " flushed";
+-
+-/***********************************************************************
+- *
+- * Function: show_section
+- *
+- * Purpose: Display section information
+- *
+- * Processing:
+- *     See function.
+- *
+- * Parameters:
+- *     mmu_reg   : MMU settings for this section
+- *     virt_addr : Starting virtual address for this section
+- *     segs      : Number of 1M segments for this section
+- *
+- * Outputs: None
+- *
+- * Returns: Nothing
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-static void show_section(UNS_32 mmu_reg,
+-						 UNS_32 virt_addr,
+-						 UNS_32 segs) 
+-{
+-	UNS_8 straddr [16];
+-	UNS_32 mmu_phy;
+-
+-	if ((mmu_reg & ARM922T_L1D_TYPE_PG_SN_MASK) !=
+-		ARM922T_L1D_TYPE_FAULT) 
+-	{
+-		if ((mmu_reg & ARM922T_L1D_TYPE_PG_SN_MASK) ==
+-			ARM922T_L1D_TYPE_CPAGE) 
+-		{
+-			term_dat_out(cpage_msg);
+-		}
+-		else if ((mmu_reg & ARM922T_L1D_TYPE_PG_SN_MASK) ==
+-			ARM922T_L1D_TYPE_FPAGE) 
+-		{
+-			term_dat_out(fpage_msg);
+-		}
+-		else
+-		{
+-			term_dat_out(sect_msg);
+-		}
+-
+-		/* Compute virtual address */
+-		str_makehex(straddr, virt_addr, 8);
+-		term_dat_out(straddr);
+-		term_dat_out((UNS_8 *) " ");
+-
+-		/* Compute mapped physical address */
+-		if ((mmu_reg & ARM922T_L1D_TYPE_PG_SN_MASK) ==
+-		ARM922T_L1D_TYPE_SECTION) 
+-		{
+-			mmu_phy = mmu_reg & 0xFFF00000;
+-		}
+-		else 
+-		{
+-			/* Don't compute addresses for non-sections */
+-			mmu_phy = 0;
+-		}
+-		str_makehex(straddr, mmu_phy, 8);
+-		term_dat_out(straddr);
+-		term_dat_out((UNS_8 *) " ");
+-
+-		/* MMU flags */
+-		if ((mmu_reg & ARM922T_L1D_BUFFERABLE) != 0) 
+-		{
+-			term_dat_out((UNS_8 *) "b");
+-		}
+-		else 
+-		{
+-			term_dat_out((UNS_8 *) " ");
+-		}
+-		if ((mmu_reg & ARM922T_L1D_CACHEABLE) != 0) 
+-		{
+-			term_dat_out((UNS_8 *) "c");
+-		}
+-		else 
+-		{
+-			term_dat_out((UNS_8 *) " ");
+-		}
+-		term_dat_out((UNS_8 *) " ");
+-
+-		/* Displays used megabytes */
+-		str_makedec(straddr, segs);
+-		term_dat_out(straddr);
+-		term_dat_out_crlf(mbytes_msg);
+-	}
+-}
+-
+-/***********************************************************************
+- *
+- * Function: mmu_dumpinfo
+- *
+- * Purpose: Display MMU info
+- *
+- * Processing:
+- *     Display the MMU information, including enable status, cache
+- *     status, and page table.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-static BOOL_32 mmu_dumpinfo(void) 
+-{
+-	UNS_32 segsz, last_mmu_reg, mmu_vrt, mmu_reg, mmu_vrtsav = 0, *pt;
+-	UNS_32 mlast_mmu_reg, mmmu_reg;
+-	int idx;
+-	UNS_8 hexaddr [16];
+-
+-	term_dat_out(mmu_msg);
+-	if (cp15_mmu_enabled() == FALSE) 
+-	{
+-		term_dat_out_crlf(disabled_msg);
+-	}
+-	else 
+-	{
+-		term_dat_out_crlf(enabled_msg);
+-
+-	    /* Get MMU control register word */
+-  		mmu_reg = cp15_get_mmu_control_reg();
+-
+-		/* Instruction cache status */
+-		term_dat_out(icache_msg);
+-		if ((mmu_reg & ARM922T_MMU_CONTROL_I) == 0) 
+-		{
+-			term_dat_out_crlf(disabled_msg);
+-		}
+-		else 
+-		{
+-			term_dat_out_crlf(enabled_msg);
+-		}
+-
+-		/* Data cache status */
+-		term_dat_out(dcache_msg);
+-		if ((mmu_reg & ARM922T_MMU_CONTROL_C) == 0) 
+-		{
+-			term_dat_out_crlf(disabled_msg);
+-		}
+-		else 
+-		{
+-			term_dat_out_crlf(enabled_msg);
+-		}
+-
+-		term_dat_out(pagetab_msg);
+-		mmu_reg = (UNS_32) cp15_get_ttb();
+-		str_makehex(hexaddr, mmu_reg, 8);
+-		term_dat_out_crlf(hexaddr);
+-		term_dat_out_crlf(slist_msg);
+-
+-		/* Process MMU table - assume that the physical and
+-		   virtual locations of table are the same */
+-		pt = (UNS_32 *) mmu_reg;
+-		mmu_vrt = 0x0;
+-		segsz = 0xFFFFFFFF;
+-		last_mmu_reg = mlast_mmu_reg = 0xFFFFFFFF;
+-		for (idx = 0; idx < 4096; idx++) 
+-		{
+-			mmu_reg = *pt;
+-			mmmu_reg = (mmu_reg & (ARM922T_L1D_TYPE_PG_SN_MASK |
+-				ARM922T_L1D_BUFFERABLE | ARM922T_L1D_CACHEABLE));
+-			segsz = segsz + 1;
+-
+-			if ((last_mmu_reg != 0xFFFFFFFF) &&
+-				(mlast_mmu_reg != mmmu_reg))
+-			{
+-				show_section(last_mmu_reg, mmu_vrtsav, segsz);
+-				segsz = 0;
+-			}
+-
+-			if (mlast_mmu_reg != mmmu_reg) 
+-			{
+-				mmu_vrtsav = mmu_vrt;
+-				last_mmu_reg = mmu_reg;
+-				mlast_mmu_reg = mmmu_reg;
+-			}
+-
+-			pt++;
+-			mmu_vrt += 0x00100000;
+-		}
+-	}
+-
+-	return TRUE;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: mmu_dumpmap
+- *
+- * Purpose: Map a virtual address range to a physical range
+- *
+- * Processing:
+- *     From the input addresses and number of sections, generate the
+- *     appropriate entries in the page table.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-static BOOL_32 mmu_dumpmap(UNS_32 vrt,
+-						   UNS_32 phy,
+-						   UNS_32 sections,
+-						   UNS_32 cache) 
+-{
+-	BOOL_32 processed = FALSE;
+-	UNS_32 mmu_phy, mmu_vrt, tmp1 = 0, tmp2, *pt;
+-	UNS_8 hexaddr [16];
+-
+-	/* Verify address boundaries are sectional */
+-	mmu_vrt = vrt & ~ARM922T_L2D_SN_BASE_MASK;
+-	mmu_phy = phy & ~ARM922T_L2D_SN_BASE_MASK;
+-	if ((mmu_vrt != 0) || (mmu_phy != 0)) 
+-	{
+-		term_dat_out_crlf(map1_err_msg);
+-	}
+-	else 
+-	{
+-		/* Verify that address range and section count will not
+-		   exceed address range of device */
+-		tmp1 = vrt >> 20;
+-		tmp1 = (tmp1 + sections) - 1;
+-		tmp2 = phy >> 20;
+-		tmp2 = (tmp2 + sections) - 1;
+-		if ((tmp1 < 4096) && (tmp2 < 4096)) 
+-		{
+-			/* Good address range and good section count */
+-			processed = TRUE;
+-		}
+-		else 
+-		{
+-			term_dat_out_crlf(map2_err_msg);
+-		}
+-	}
+-	
+-	/* Generate static part of MMU word */
+-	if (cache == 0) 
+-	{
+-		/* Section mapped with cache disabled */
+-		tmp1 = ARM922T_L1D_TYPE_SECTION;
+-	}
+-	else if (cache == 1)
+-	{
+-		/* Section mapped with cache enabled */
+-		tmp1 = (ARM922T_L1D_BUFFERABLE | ARM922T_L1D_CACHEABLE |
+-			ARM922T_L1D_TYPE_SECTION);
+-	}
+-	else if (cache == 2)
+-	{
+-		/* Section unmapped */
+-		tmp1 = ARM922T_L1D_TYPE_FAULT;
+-	}
+-	tmp1 |= ARM922T_L1D_AP_ALL;
+-
+-	/* Offset into page table for virtual address */
+-	tmp2 = (vrt >> 20);
+-	pt = cp15_get_ttb() + tmp2;
+-
+-	/* Loop until all sections are complete */
+-	while ((sections > 0) && (processed == TRUE)) 
+-	{
+-		/* Add in physical address */
+-		tmp2 = tmp1 | (phy & ARM922T_L2D_SN_BASE_MASK);
+-
+-		/* Save new section descriptor for virtual address */
+-		*pt = tmp2;
+-
+-		/* Output message shown the map */
+-		term_dat_out(phya_msg);
+-		str_makehex(hexaddr, phy, 8);
+-		term_dat_out(hexaddr);
+-		if (cache == 2) 
+-		{
+-			term_dat_out(unmapped_msg);
+-		}
+-		else 
+-		{
+-			term_dat_out(mapped_msg);
+-		}
+-		str_makehex(hexaddr, vrt, 8);
+-		term_dat_out(hexaddr);
+-		if (cache == 1) 
+-		{
+-			term_dat_out(cached_msg);
+-		}
+-		term_dat_out_crlf((UNS_8 *) "");
+-
+-		/* Next section and page table entry*/
+-		phy += 0x00100000;
+-		vrt += 0x00100000;
+-		pt++;
+-		sections--;
+-	}
+-
+-	return processed;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: cmd_mmuinfo
+- *
+- * Purpose: Display MMU information
+- *
+- * Processing:
+- *     See function. 
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-static BOOL_32 cmd_mmuinfo(void) 
+-{
+-	mmu_dumpinfo();
+-
+-	return TRUE;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: cmd_map
+- *
+- * Purpose: Map a physical address region to a virtual region
+- *
+- * Processing:
+- *     See function. 
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-BOOL_32 cmd_map(void) 
+-{
+-	UNS_32 phy, virt, sects, ce = 0;
+-
+-	/* Get arguments */
+-	virt = cmd_get_field_val(1);
+-	phy = cmd_get_field_val(2);
+-	sects = cmd_get_field_val(3);
+-	ce = cmd_get_field_val(4);
+-
+-	if (ce <= 2) 
+-	{
+-		mmu_dumpmap(virt, phy, sects, ce);
+-	}
+-
+-	return TRUE;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: cmd_inval
+- *
+- * Purpose: MMU cache flush and invalidate
+- *
+- * Processing:
+- *     See function. 
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-BOOL_32 cmd_inval(void) 
+-{
+-	dcache_flush();
+-	icache_inval();
+-	term_dat_out(caches_msg);
+-	term_dat_out(inval_msg);
+-
+-	return TRUE;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: cmd_dcache
+- *
+- * Purpose: MMU data cache enable and disable
+- *
+- * Processing:
+- *     If the value passed in the parser is 1, enable the data cache,
+- *     otherwise disable the data cache.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-BOOL_32 cmd_dcache(void) 
+-{
+-	UNS_32 cenable;
+-	UNS_8 *ppar;
+-
+-	/* Get argument */
+-	cenable = cmd_get_field_val(1);
+-
+-	switch (cenable)
+-	{
+-		case 0:
+-			dcache_flush();
+-			cp15_set_dcache(0);
+-			ppar = disabled_msg;
+-			break;
+-
+-		case 1:
+-			cp15_invalidate_cache();
+-			cp15_set_dcache(1);
+-			ppar = enabled_msg;
+-			break;
+-
+-		case 2:
+-		default:
+-			dcache_flush();
+-			ppar = flushed_msg;
+-			break;
+-	}
+-
+-	term_dat_out(dcache_msg);
+-	term_dat_out_crlf(ppar);
+-
+-	return TRUE;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: cmd_icache
+- *
+- * Purpose: MMU instruction cache enable and disable
+- *
+- * Processing:
+- *     If the value passed in the parser is 1, enable the instruction
+- *     cache, otherwise disable the instruction cache.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-BOOL_32 cmd_icache(void)
+-{
+-	UNS_32 cenable;
+-	UNS_8 *ppar;
+-
+-	/* Get argument */
+-	cenable = cmd_get_field_val(1);
+-
+-	if (cenable == 1) 
+-	{
+-		dcache_flush();
+-		cp15_invalidate_cache();
+-		cp15_set_icache(1);
+-		ppar = enabled_msg;
+-	}
+-	else
+-	{
+-		cp15_set_icache(0);
+-		ppar = disabled_msg;
+-	}
+-
+-	term_dat_out(icache_msg);
+-	term_dat_out_crlf(ppar);
+-
+-	return TRUE;
+-}
+-
+-
+-/***********************************************************************
+- *
+- * Function: cmd_mmuenab
+- *
+- * Purpose: Enable or disable MMU
+- *
+- * Processing:
+- *     See function. 
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-BOOL_32 cmd_mmuenab(void) 
+-{
+-	UNS_8 *ppar;
+-	UNS_32 cenable;
+-
+-	term_dat_out_crlf((UNS_8 *) "Warning: Changing MMU status on "
+-		" cached and buffered code can cause system crashes.");
+-
+-	/* Get argument */
+-	cenable = cmd_get_field_val(1);
+-
+-	if (cenable == 1) 
+-	{
+-		if ((cp15_get_mmu_control_reg() & ARM922T_MMU_CONTROL_C) != 0)
+-		{
+-			cp15_invalidate_cache();
+-		}
+-
+-		cp15_set_mmu(1);
+-		ppar = enabled_msg;
+-	}
+-	else
+-	{
+-		cp15_dcache_flush();
+-		cp15_write_buffer_flush();
+-		cp15_invalidate_cache();
+-		cp15_set_mmu(0);
+-		ppar = disabled_msg;
+-	}
+-
+-	term_dat_out(mmu_msg);
+-	term_dat_out_crlf(ppar);
+-
+-	return TRUE;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: mmu_cmd_group_init
+- *
+- * Purpose: Initialize MMU command group
+- *
+- * Processing:
+- *     See function. 
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: Nothin
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-void mmu_cmd_group_init(void)
+-{
+-	/* Add MMU group */
+-	cmd_add_group(&mmu_group);
+-
+-	/* Add commands to the MMU group */
+-	cmd_add_new_command(&mmu_group, &core_dcache_cmd);
+-	cmd_add_new_command(&mmu_group, &core_icache_cmd);
+-	cmd_add_new_command(&mmu_group, &core_inval_cmd);
+-	cmd_add_new_command(&mmu_group, &core_mmuenab_cmd);
+-	cmd_add_new_command(&mmu_group, &core_map_cmd);
+-	cmd_add_new_command(&mmu_group, &core_mmuinfo_cmd);
+-}

boot/lpc32xxcdl/0003-libnosys_gnu.patch

@@ -0,0 +1,188 @@
+Fix compilation and eabi issues
+
+Since we are not linking with libc anymore, we need to define our own memset,
+strlen and memcpy. Also, as we are using a *libc compiler, we need to "handle"
+exceptions (mostly division by 0) by defining raise() and
+__aeabi_unwind_cpp_pr0.
+
+Signed-off-by: Alexandre Belloni <abelloni@adeneo-embedded.com>
+---
+ csps/lpc32xx/bsps/ea3250/source/libnosys_gnu.c  |   41 +++++++++++++++++++++++
+ csps/lpc32xx/bsps/fdi3250/source/libnosys_gnu.c |   41 +++++++++++++++++++++++
+ csps/lpc32xx/bsps/phy3250/source/libnosys_gnu.c |   41 +++++++++++++++++++++++
+ 3 files changed, 123 insertions(+), 0 deletions(-)
+
+diff --git a/csps/lpc32xx/bsps/ea3250/source/libnosys_gnu.c b/csps/lpc32xx/bsps/ea3250/source/libnosys_gnu.c
+index 385b0ab..f1f0a0a 100644
+--- a/csps/lpc32xx/bsps/ea3250/source/libnosys_gnu.c
++++ b/csps/lpc32xx/bsps/ea3250/source/libnosys_gnu.c
+@@ -25,6 +25,7 @@
+ #include <errno.h>
+ #include <sys/times.h>
+ #include <sys/stat.h>
++#include <sys/types.h>
+ 
+ /* errno definition */
+ #undef errno
+@@ -125,4 +126,44 @@ int _write(int file, char *ptr, int len){
+     return 0;
+ }
+ 
++void * memset(void * s,int c,size_t count)
++{
++        char *xs = (char *) s;
++
++        while (count--)
++                *xs++ = c;
++
++        return s;
++}
++
++
++size_t strlen(const char * s)
++{
++        const char *sc;
++
++        for (sc = s; *sc != '\0'; ++sc)
++                /* nothing */;
++        return sc - s;
++}
++
++void * memcpy(void * dest,const void *src,size_t count)
++{
++        char *tmp = (char *) dest, *s = (char *) src;
++
++        while (count--)
++                *tmp++ = *s++;
++
++        return dest;
++}
++
++
++/* Dummy functions to avoid linker complaints */
++void __aeabi_unwind_cpp_pr0(void)
++{
++};
++
++void raise(void)
++{
++};
++
+ #endif /*__GNUC__*/
+diff --git a/csps/lpc32xx/bsps/fdi3250/source/libnosys_gnu.c b/csps/lpc32xx/bsps/fdi3250/source/libnosys_gnu.c
+index 385b0ab..f1f0a0a 100644
+--- a/csps/lpc32xx/bsps/fdi3250/source/libnosys_gnu.c
++++ b/csps/lpc32xx/bsps/fdi3250/source/libnosys_gnu.c
+@@ -25,6 +25,7 @@
+ #include <errno.h>
+ #include <sys/times.h>
+ #include <sys/stat.h>
++#include <sys/types.h>
+ 
+ /* errno definition */
+ #undef errno
+@@ -125,4 +126,44 @@ int _write(int file, char *ptr, int len){
+     return 0;
+ }
+ 
++void * memset(void * s,int c,size_t count)
++{
++        char *xs = (char *) s;
++
++        while (count--)
++                *xs++ = c;
++
++        return s;
++}
++
++
++size_t strlen(const char * s)
++{
++        const char *sc;
++
++        for (sc = s; *sc != '\0'; ++sc)
++                /* nothing */;
++        return sc - s;
++}
++
++void * memcpy(void * dest,const void *src,size_t count)
++{
++        char *tmp = (char *) dest, *s = (char *) src;
++
++        while (count--)
++                *tmp++ = *s++;
++
++        return dest;
++}
++
++
++/* Dummy functions to avoid linker complaints */
++void __aeabi_unwind_cpp_pr0(void)
++{
++};
++
++void raise(void)
++{
++};
++
+ #endif /*__GNUC__*/
+diff --git a/csps/lpc32xx/bsps/phy3250/source/libnosys_gnu.c b/csps/lpc32xx/bsps/phy3250/source/libnosys_gnu.c
+index cfdb674..6b50c60 100644
+--- a/csps/lpc32xx/bsps/phy3250/source/libnosys_gnu.c
++++ b/csps/lpc32xx/bsps/phy3250/source/libnosys_gnu.c
+@@ -25,6 +25,7 @@
+ #include <errno.h>
+ #include <sys/times.h>
+ #include <sys/stat.h>
++#include <sys/types.h>
+ 
+ /* errno definition */
+ #undef errno
+@@ -125,4 +126,44 @@ int _write(int file, char *ptr, int len){
+     return 0;
+ }
+ 
++void * memset(void * s,int c,size_t count)
++{
++        char *xs = (char *) s;
++
++        while (count--)
++                *xs++ = c;
++
++        return s;
++}
++
++
++size_t strlen(const char * s)
++{
++        const char *sc;
++
++        for (sc = s; *sc != '\0'; ++sc)
++                /* nothing */;
++        return sc - s;
++}
++
++void * memcpy(void * dest,const void *src,size_t count)
++{
++        char *tmp = (char *) dest, *s = (char *) src;
++
++        while (count--)
++                *tmp++ = *s++;
++
++        return dest;
++}
++
++
++/* Dummy functions to avoid linker complaints */
++void __aeabi_unwind_cpp_pr0(void)
++{
++};
++
++void raise(void)
++{
++};
++
+ #endif /*__GNUC__*/
+-- 
+1.7.7.3
+

boot/lpc32xxcdl/0004-slashes.patch

@@ -0,0 +1,521 @@
+Use slashes instead of backslashes
+
+Signed-off-by: Alexandre Belloni <abelloni@adeneo-embedded.com>
+---
+ .../bsps/common/examples/buildfiles/makefile       |   10 +++---
+ .../startup/examples/burners/makefile.burner       |   16 +++++-----
+ csps/lpc32xx/bsps/ea3250/source/makefile           |   10 +++---
+ csps/lpc32xx/bsps/fdi3250/source/makefile          |   12 ++++----
+ csps/lpc32xx/bsps/phy3250/examples/makefile        |    2 +-
+ csps/lpc32xx/bsps/phy3250/source/makefile          |    2 +-
+ .../examples/Burners/nor/kickstart/makefile        |    2 +-
+ .../startup/examples/Burners/nor/norerase/makefile |    2 +-
+ .../startup/examples/Burners/nor/s1lapp/makefile   |    2 +-
+ .../examples/Burners/spi/kickstart/makefile        |    2 +-
+ csps/lpc32xx/source/makefile                       |   10 +++---
+ lpc/source/makefile                                |   10 +++---
+ makefile                                           |    2 +-
+ makerule/common/make.rules.environment             |   30 ++++++++++----------
+ makerule/lpc32xx/make.lpc32xx.gnu                  |    2 +-
+ makerule/lpc32xx/make.lpc32xx.iar                  |   12 ++++----
+ makerule/lpc32xx/make.lpc32xx.keil                 |    6 ++--
+ makerule/lpc32xx/make.lpc32xx.rvw                  |    2 +-
+ 18 files changed, 67 insertions(+), 67 deletions(-)
+
+diff --git a/csps/lpc32xx/bsps/common/examples/buildfiles/makefile b/csps/lpc32xx/bsps/common/examples/buildfiles/makefile
+index cf4977c..1da2201 100644
+--- a/csps/lpc32xx/bsps/common/examples/buildfiles/makefile
++++ b/csps/lpc32xx/bsps/common/examples/buildfiles/makefile
+@@ -25,16 +25,16 @@
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\$(CSP)\make.$(CSP).$(TOOL)
++include $(NXPMCU_SOFTWARE)/makerule/$(CSP)/make.$(CSP).$(TOOL)
+ 
+ ########################################################################
+ #
+ # Pick up the assembler and C source files in the directory  
+ #
+ ########################################################################
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.ftypes
+-AFLAGS +=-I..\Include
+-CFLAGS +=-I..\Include
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.ftypes
++AFLAGS +=-I../Include
++CFLAGS +=-I../Include
+ 
+ ########################################################################
+ #
+@@ -42,6 +42,6 @@ CFLAGS +=-I..\Include
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.build
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.build
+ 
+ 
+diff --git a/csps/lpc32xx/bsps/common/startup/examples/burners/makefile.burner b/csps/lpc32xx/bsps/common/startup/examples/burners/makefile.burner
+index fca3947..18bd703 100644
+--- a/csps/lpc32xx/bsps/common/startup/examples/burners/makefile.burner
++++ b/csps/lpc32xx/bsps/common/startup/examples/burners/makefile.burner
+@@ -22,9 +22,9 @@
+ #
+ ########################################################################
+ 
+-COMMON_BASE := $(NXPMCU_SOFTWARE)\csps\$(CSP)\bsps\common
+-include $(NXPMCU_SOFTWARE)\makerule\$(CSP)\make.$(CSP).$(TOOL)
+-include $(COMMON_BASE)\startup\examples\buildfiles\make.env
++COMMON_BASE := $(NXPMCU_SOFTWARE)/csps/$(CSP)/bsps/common
++include $(NXPMCU_SOFTWARE)/makerule/$(CSP)/make.$(CSP).$(TOOL)
++include $(COMMON_BASE)/startup/examples/buildfiles/make.env
+ 
+ ########################################################################
+ # ARM Realview
+@@ -38,7 +38,7 @@ AFLAGS += --predefine "USE_ALL_STACKS SETL {TRUE}"
+ #AFLAGS += --predefine "RW_RELOC SETL {TRUE}"
+ 
+ # This runs from IRAM
+-LDSCRIPT =$(COMMON_BASE)\startup\examples\buildfiles\ldscript_iram_rvw.ld
++LDSCRIPT =$(COMMON_BASE)/startup/examples/buildfiles/ldscript_iram_rvw.ld
+ LDFLAGS = --remove
+ MAP = --map --info=totals,sizes,unused --symbols --list
+ endif
+@@ -55,7 +55,7 @@ AFLAGS += --predefine "USE_ALL_STACKS SETL {TRUE}"
+ #AFLAGS += --predefine "RW_RELOC SETL {TRUE}"
+ 
+ # This runs from IRAM
+-LDSCRIPT =$(COMMON_BASE)\startup\examples\buildfiles\ldscript_iram_rvw.ld
++LDSCRIPT =$(COMMON_BASE)/startup/examples/buildfiles/ldscript_iram_rvw.ld
+ LDFLAGS = --remove
+ MAP = --map --info=totals,sizes,unused --symbols --list
+ endif
+@@ -72,7 +72,7 @@ AFLAGS += --defsym USE_ALL_STACKS=1
+ #AFLAGS += --defsym RW_RELOC=1
+ 
+ # This runs from IRAM
+-LDSCRIPT =$(COMMON_BASE)\startup\examples\buildfiles\ldscript_iram_gnu.ld
++LDSCRIPT =$(COMMON_BASE)/startup/examples/buildfiles/ldscript_iram_gnu.ld
+ 
+ endif
+ 
+@@ -108,7 +108,7 @@ endif
+ # Pick up the assembler and C source files in the directory  
+ #
+ ########################################################################
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.ftypes
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.ftypes
+ 
+ ########################################################################
+ #
+@@ -157,6 +157,6 @@ endif
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.build
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.build
+ 
+ .PHONY: debug bin
+diff --git a/csps/lpc32xx/bsps/ea3250/source/makefile b/csps/lpc32xx/bsps/ea3250/source/makefile
+index 7cada25..2899b20 100644
+--- a/csps/lpc32xx/bsps/ea3250/source/makefile
++++ b/csps/lpc32xx/bsps/ea3250/source/makefile
+@@ -22,16 +22,16 @@
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\$(CSP)\make.$(CSP).$(TOOL)
++include $(NXPMCU_SOFTWARE)/makerule/$(CSP)/make.$(CSP).$(TOOL)
+ 
+ ########################################################################
+ #
+ # Pick up the assembler and C source files in the directory  
+ #
+ ########################################################################
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.ftypes
+-AFLAGS +=-I..\Include
+-CFLAGS +=-I..\Include
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.ftypes
++AFLAGS +=-I../Include
++CFLAGS +=-I../Include
+ 
+ ########################################################################
+ #
+@@ -64,7 +64,7 @@ realclean: lib_realclean
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.build
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.build
+ 
+ .PHONY: all lib_clean lib_realclean
+ 
+diff --git a/csps/lpc32xx/bsps/fdi3250/source/makefile b/csps/lpc32xx/bsps/fdi3250/source/makefile
+index 4e153bb..11e4b63 100644
+--- a/csps/lpc32xx/bsps/fdi3250/source/makefile
++++ b/csps/lpc32xx/bsps/fdi3250/source/makefile
+@@ -22,16 +22,16 @@
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\$(CSP)\make.$(CSP).$(TOOL)
++include $(NXPMCU_SOFTWARE)/makerule/$(CSP)/make.$(CSP).$(TOOL)
+ 
+ ########################################################################
+ #
+ # Pick up the assembler and C source files in the directory  
+ #
+ ########################################################################
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.ftypes
+-AFLAGS +=-I..\Include
+-CFLAGS +=-I..\Include
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.ftypes
++AFLAGS +=-I../Include
++CFLAGS +=-I../Include
+ 
+ ########################################################################
+ #
+@@ -53,7 +53,7 @@ lib_clean:
+ # delete all targets this Makefile can make and all built libraries
+ # linked in
+ lib_realclean: 
+-	-@$(RM) $(BSP_LIB_DIR)\*.a
++	-@$(RM) $(BSP_LIB_DIR)/*.a
+ 	-@$(RMDIR) $(BSP_LIB_DIR)
+ 	
+ clean: lib_clean
+@@ -65,7 +65,7 @@ realclean: lib_realclean
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.build
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.build
+ 
+ .PHONY: all lib_clean lib_realclean
+ 
+diff --git a/csps/lpc32xx/bsps/phy3250/examples/makefile b/csps/lpc32xx/bsps/phy3250/examples/makefile
+index b939252..e7feaa6 100644
+--- a/csps/lpc32xx/bsps/phy3250/examples/makefile
++++ b/csps/lpc32xx/bsps/phy3250/examples/makefile
+@@ -25,7 +25,7 @@
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\$(CSP)\make.$(CSP).$(TOOL)
++include $(NXPMCU_SOFTWARE)/makerule/$(CSP)/make.$(CSP).$(TOOL)
+ 
+ SUBDIRS = adc dram_self_refresh hstimer hsuart i2c kscan lcd_colorbars
+ SUBDIRS += lcd_tsc mi2c mstimer pwm pwm_simple rtc sdcard sdcard_dma
+diff --git a/csps/lpc32xx/bsps/phy3250/source/makefile b/csps/lpc32xx/bsps/phy3250/source/makefile
+index 7c48e7d..750b776 100644
+--- a/csps/lpc32xx/bsps/phy3250/source/makefile
++++ b/csps/lpc32xx/bsps/phy3250/source/makefile
+@@ -32,7 +32,7 @@ include $(NXPMCU_SOFTWARE)/makerule/$(CSP)/make.$(CSP).$(TOOL)
+ # Pick up the assembler and C source files in the directory  
+ #
+ ########################################################################
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.ftypes
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.ftypes
+ AFLAGS +=-I../Include
+ CFLAGS +=-I../Include
+ 
+diff --git a/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/kickstart/makefile b/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/kickstart/makefile
+index 01e2b38..526d6cc 100644
+--- a/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/kickstart/makefile
++++ b/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/kickstart/makefile
+@@ -78,7 +78,7 @@ endif
+ 
+ ########################################################################
+ #
+-# Compiler\linker specific stuff
++# Compiler/linker specific stuff
+ #
+ ########################################################################
+ 
+diff --git a/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/norerase/makefile b/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/norerase/makefile
+index ce329f5..e81b8db 100644
+--- a/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/norerase/makefile
++++ b/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/norerase/makefile
+@@ -77,7 +77,7 @@ endif
+ 
+ ########################################################################
+ #
+-# Compiler\linker specific stuff
++# Compiler/linker specific stuff
+ #
+ ########################################################################
+ 
+diff --git a/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/s1lapp/makefile b/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/s1lapp/makefile
+index 4426fc7..196faec 100644
+--- a/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/s1lapp/makefile
++++ b/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/s1lapp/makefile
+@@ -77,7 +77,7 @@ endif
+ 
+ ########################################################################
+ #
+-# Compiler\linker specific stuff
++# Compiler/linker specific stuff
+ #
+ ########################################################################
+ 
+diff --git a/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/spi/kickstart/makefile b/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/spi/kickstart/makefile
+index dc73b64..39fc304 100644
+--- a/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/spi/kickstart/makefile
++++ b/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/spi/kickstart/makefile
+@@ -78,7 +78,7 @@ endif
+ 
+ ########################################################################
+ #
+-# Compiler\linker specific stuff
++# Compiler/linker specific stuff
+ #
+ ########################################################################
+ 
+diff --git a/csps/lpc32xx/source/makefile b/csps/lpc32xx/source/makefile
+index 8e05456..16bd944 100644
+--- a/csps/lpc32xx/source/makefile
++++ b/csps/lpc32xx/source/makefile
+@@ -25,16 +25,16 @@
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\$(CSP)\make.$(CSP).$(TOOL)
++include $(NXPMCU_SOFTWARE)/makerule/$(CSP)/make.$(CSP).$(TOOL)
+ 
+ ########################################################################
+ #
+ # Pick up the assembler and C source files in the directory  
+ #
+ ########################################################################
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.ftypes
+-AFLAGS +=-I..\Include
+-CFLAGS +=-I..\Include
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.ftypes
++AFLAGS +=-I../Include
++CFLAGS +=-I../Include
+ 
+ 
+ ########################################################################
+@@ -68,7 +68,7 @@ realclean: lib_realclean
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.build
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.build
+ 
+ .PHONY: all lib_clean lib_realclean
+ 
+diff --git a/lpc/source/makefile b/lpc/source/makefile
+index 2860db9..ae7d612 100644
+--- a/lpc/source/makefile
++++ b/lpc/source/makefile
+@@ -25,16 +25,16 @@
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\$(CSP)\make.$(CSP).$(TOOL)
++include $(NXPMCU_SOFTWARE)/makerule/$(CSP)/make.$(CSP).$(TOOL)
+ 
+ ########################################################################
+ #
+ # Pick up the assembler and C source files in the directory  
+ #
+ ########################################################################
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.ftypes
+-AFLAGS +=-I..\Include
+-CFLAGS +=-I..\Include
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.ftypes
++AFLAGS +=-I../Include
++CFLAGS +=-I../Include
+ 
+ ########################################################################
+ #
+@@ -67,7 +67,7 @@ realclean: lib_realclean
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.build
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.build
+ 
+ .PHONY: all lib_clean lib_realclean
+ 
+diff --git a/makefile b/makefile
+index 8645fcc..86fa6bc 100644
+--- a/makefile
++++ b/makefile
+@@ -34,7 +34,7 @@ TARGETS_CLN	=gen_clean csp_clean bsp_clean
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\$(CSP)\make.$(CSP).$(TOOL)
++include $(NXPMCU_SOFTWARE)/makerule/$(CSP)/make.$(CSP).$(TOOL)
+ 
+ ########################################################################
+ #
+diff --git a/makerule/common/make.rules.environment b/makerule/common/make.rules.environment
+index d5737fe..4e6df48 100644
+--- a/makerule/common/make.rules.environment
++++ b/makerule/common/make.rules.environment
+@@ -52,7 +52,7 @@ ASTYLE          =astyle --options=$(BUILD_ROOT)/tools/astyle.cfg
+ #
+ ########################################################################
+   
+-CSP_LIB_DIR  =$(BUILD_ROOT)\csps\$(CSP)\lib
++CSP_LIB_DIR  =$(BUILD_ROOT)/csps/$(CSP)/lib
+ 
+ ########################################################################
+ #
+@@ -60,7 +60,7 @@ CSP_LIB_DIR  =$(BUILD_ROOT)\csps\$(CSP)\lib
+ #
+ ########################################################################
+ 
+-BSP_LIB_DIR =$(BUILD_ROOT)\csps\$(CSP)\bsps\$(BSP)\lib
++BSP_LIB_DIR =$(BUILD_ROOT)/csps/$(CSP)/bsps/$(BSP)/lib
+ 
+ ########################################################################
+ #
+@@ -68,7 +68,7 @@ BSP_LIB_DIR =$(BUILD_ROOT)\csps\$(CSP)\bsps\$(BSP)\lib
+ #
+ ########################################################################
+ 
+-GEN_LIB_DIR =$(BUILD_ROOT)\$(GEN)\lib
++GEN_LIB_DIR =$(BUILD_ROOT)/$(GEN)/lib
+ 
+ ########################################################################
+ # 
+@@ -76,9 +76,9 @@ GEN_LIB_DIR =$(BUILD_ROOT)\$(GEN)\lib
+ # 
+ ########################################################################
+ 
+-CSP_DIR     =$(BUILD_ROOT)\csps\$(CSP)
+-CSP_SRC_DIR =$(CSP_DIR)\source
+-CSP_INC_DIR =$(CSP_DIR)\include
++CSP_DIR     =$(BUILD_ROOT)/csps/$(CSP)
++CSP_SRC_DIR =$(CSP_DIR)/source
++CSP_INC_DIR =$(CSP_DIR)/include
+ 
+ ########################################################################
+ # 
+@@ -86,9 +86,9 @@ CSP_INC_DIR =$(CSP_DIR)\include
+ # 
+ ########################################################################
+ 
+-BSP_DIR     =$(BUILD_ROOT)\csps\$(CSP)\bsps\$(BSP)
+-BSP_SRC_DIR =$(BSP_DIR)\source
+-BSP_INC_DIR =$(BSP_DIR)\include
++BSP_DIR     =$(BUILD_ROOT)/csps/$(CSP)/bsps/$(BSP)
++BSP_SRC_DIR =$(BSP_DIR)/source
++BSP_INC_DIR =$(BSP_DIR)/include
+ 
+ ########################################################################
+ # 
+@@ -96,9 +96,9 @@ BSP_INC_DIR =$(BSP_DIR)\include
+ # 
+ ########################################################################
+ 
+-GEN_DIR     =$(BUILD_ROOT)\$(GEN)
+-GEN_SRC_DIR =$(GEN_DIR)\source
+-GEN_INC_DIR =$(GEN_DIR)\include
++GEN_DIR     =$(BUILD_ROOT)/$(GEN)
++GEN_SRC_DIR =$(GEN_DIR)/source
++GEN_INC_DIR =$(GEN_DIR)/include
+ 
+ ########################################################################
+ #
+@@ -151,6 +151,6 @@ endif
+ # 
+ ########################################################################
+ 
+-TARGET_CSP_LIB =$(CSP_LIB_DIR)\$(CSP_ARCHIVE)
+-TARGET_BSP_LIB =$(BSP_LIB_DIR)\$(BSP_ARCHIVE)
+-TARGET_GEN_LIB =$(GEN_LIB_DIR)\$(GEN_ARCHIVE)
++TARGET_CSP_LIB =$(CSP_LIB_DIR)/$(CSP_ARCHIVE)
++TARGET_BSP_LIB =$(BSP_LIB_DIR)/$(BSP_ARCHIVE)
++TARGET_GEN_LIB =$(GEN_LIB_DIR)/$(GEN_ARCHIVE)
+diff --git a/makerule/lpc32xx/make.lpc32xx.gnu b/makerule/lpc32xx/make.lpc32xx.gnu
+index 3277d99..d80b98d 100644
+--- a/makerule/lpc32xx/make.lpc32xx.gnu
++++ b/makerule/lpc32xx/make.lpc32xx.gnu
+@@ -19,7 +19,7 @@
+ # use without further testing or modification. 
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.environment
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.environment
+ 
+ CPU      = arm926ej-s
+ CFLAGS   = -mcpu=arm926ej-s -Wall -Os
+diff --git a/makerule/lpc32xx/make.lpc32xx.iar b/makerule/lpc32xx/make.lpc32xx.iar
+index 238ebbf..27d163f 100644
+--- a/makerule/lpc32xx/make.lpc32xx.iar
++++ b/makerule/lpc32xx/make.lpc32xx.iar
+@@ -19,12 +19,12 @@
+ # use without further testing or modification. 
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.environment
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.environment
+ 
+-IARBASE   = $(IAR_ROOT)\ARM
+-IARTOOLS  = $(IARBASE)\bin
+-IAR_LIB   = $(IARBASE)\lib
+-IAR_INC   = $(IARBASE)\inc
++IARBASE   = $(IAR_ROOT)/ARM
++IARTOOLS  = $(IARBASE)/bin
++IAR_LIB   = $(IARBASE)/lib
++IAR_INC   = $(IARBASE)/inc
+ CC        = iccarm
+ CCP       = iccarm
+ AS        = iasmarm
+@@ -36,7 +36,7 @@ CFLAGS    += -I"$(IAR_INC)"
+ AFLAGS    = --cpu 5TEJ
+ LDFLAGS   = 
+ LK        = "$(TARGET_GEN_LIB)" "$(TARGET_CSP_LIB)" "$(TARGET_BSP_LIB)"
+-;LK        += "$(IAR_LIB)\dl4tpannl8f.r79"
++;LK        += "$(IAR_LIB)/dl4tpannl8f.r79"
+ MAP       = --map
+ LDESC     = --config
+ ENTRY     = --entry
+diff --git a/makerule/lpc32xx/make.lpc32xx.keil b/makerule/lpc32xx/make.lpc32xx.keil
+index dd27583..7334d3f 100644
+--- a/makerule/lpc32xx/make.lpc32xx.keil
++++ b/makerule/lpc32xx/make.lpc32xx.keil
+@@ -19,7 +19,7 @@
+ # use without further testing or modification. 
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.environment
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.environment
+ 
+ CC        =armcc
+ CCP       =armcc
+@@ -27,11 +27,11 @@ AS        =armasm
+ LD        =armlink
+ AR        =armar -r -s
+ CFLAGS    =--arm -O3 -g --device DARMP3 -D__MICROLIB 
+-CFLAGS    +=-I$(KEIL_RVCT)\inc -I$(CSP_INC_DIR) -I$(BSP_INC_DIR) -I$(GEN_INC_DIR) 
++CFLAGS    +=-I$(KEIL_RVCT)/inc -I$(CSP_INC_DIR) -I$(BSP_INC_DIR) -I$(GEN_INC_DIR) 
+ AFLAGS    =--arm --device=DARMP3 
+ AFLAGS    +=-I$(CSP_INC_DIR) -I$(BSP_INC_DIR) -I$(GEN_INC_DIR)
+ LDFLAGS   =--noremove
+-LK        =--device DARMP3 --libpath $(KEIL_RVCT)\lib --scan $(TARGET_CSP_LIB)
++LK        =--device DARMP3 --libpath $(KEIL_RVCT)/lib --scan $(TARGET_CSP_LIB)
+ LK        +=--scan $(TARGET_BSP_LIB) 
+ LK        +=--scan $(TARGET_GEN_LIB)
+ MAP       =--map --list
+diff --git a/makerule/lpc32xx/make.lpc32xx.rvw b/makerule/lpc32xx/make.lpc32xx.rvw
+index 59961dd..2419976 100644
+--- a/makerule/lpc32xx/make.lpc32xx.rvw
++++ b/makerule/lpc32xx/make.lpc32xx.rvw
+@@ -19,7 +19,7 @@
+ # use without further testing or modification. 
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.environment
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.environment
+ 
+ CC        =armcc
+ CCP       =armcpp
+-- 
+1.7.7.3
+

boot/lpc32xxcdl/Config.in

@@ -0,0 +1,10 @@
+config BR2_TARGET_LPC32XXCDL
+	bool "LPC32XX CDL (kickstart and S1L)"
+	depends on BR2_arm926t
+
+if BR2_TARGET_LPC32XXCDL
+
+config BR2_TARGET_LPC32XXCDL_BOARDNAME
+	string "LPC32xx board name"
+
+endif #BR2_TARGET_LPC32XXCDL

boot/lpc32xxcdl/lpc32xxcdl.hash

@@ -0,0 +1,2 @@
+# Locally computed
+sha256  ded3fa936a96d3fb8188ca6214f57b5208bd49e5416bd69f38bfc810b34197bc  lpc32xx_cdl-v2.11.zip

boot/lpc32xxcdl/lpc32xxcdl.mk

@@ -0,0 +1,71 @@
+################################################################################
+#
+# lpc32xxcdl
+#
+################################################################################
+
+LPC32XXCDL_VERSION = 2.11
+LPC32XXCDL_SOURCE = lpc32xx_cdl-v$(LPC32XXCDL_VERSION).zip
+LPC32XXCDL_SITE = https://community.nxp.com/pwmxy87654/attachments/pwmxy87654/lpcware-archive/61/2
+
+LPC32XXCDL_INSTALL_TARGET = NO
+LPC32XXCDL_INSTALL_IMAGES = YES
+
+ifeq ($(BR2_TARGET_LPC32XXCDL_BOARDNAME),"ea3250")
+LPC32XXCDL_KICKSTART = kickstart/nand
+LPC32XXCDL_KICKSTART_BURNER = nand/kickstart
+LPC32XXCDL_S1L = s1l
+LPC32XXCDL_S1L_BURNER = nand/s1lapp
+endif
+
+ifeq ($(BR2_TARGET_LPC32XXCDL_BOARDNAME),"phy3250")
+LPC32XXCDL_KICKSTART = kickstart/kickstart_nand
+LPC32XXCDL_KICKSTART_BURNER = nand/kickstart
+LPC32XXCDL_S1L = s1l/s1l_nand_boot
+LPC32XXCDL_S1L_BURNER = nand/s1lapp
+endif
+
+ifeq ($(BR2_TARGET_LPC32XXCDL_BOARDNAME),"fdi3250")
+LPC32XXCDL_KICKSTART = kickstart/nand
+LPC32XXCDL_KICKSTART_BURNER = nand/kickstart_jtag
+LPC32XXCDL_S1L = s1l
+LPC32XXCDL_S1L_BURNER = nand/s1lapp_jtag
+endif
+
+LPC32XXCDL_BUILD_FLAGS = \
+	CROSS_COMPILE=$(TARGET_CROSS) \
+	NXPMCU_WINBASE=$(@D) \
+	NXPMCU_SOFTWARE=$(@D) \
+	BSP=$(BR2_TARGET_LPC32XXCDL_BOARDNAME) \
+	CSP=lpc32xx TOOL=gnu GEN=lpc
+
+LPC32XXCDL_BOARD_STARTUP_DIR = \
+	csps/lpc32xx/bsps/$(BR2_TARGET_LPC32XXCDL_BOARDNAME)/startup/examples/
+
+# Source files are with dos newlines, which our patch infrastructure doesn't
+# handle. Work around it by converting the affected files to unix newlines
+# before patching
+define LPC32XXCDL_EXTRACT_CMDS
+	unzip $(LPC32XXCDL_DL_DIR)/$(LPC32XXCDL_SOURCE) -d $(@D)
+	mv $(@D)/lpc3xxx_cdl/* $(@D)
+	rmdir $(@D)/lpc3xxx_cdl/
+	sed -n 's|^[+-]\{3\} [^/]\+\([^ \t]*\)\(.*\)|$(@D)\1|p' \
+		boot/lpc32xxcdl/*.patch| sort -u | xargs $(SED) 's/\x0D$$//'
+endef
+
+define LPC32XXCDL_BUILD_CMDS
+	$(MAKE1) $(LPC32XXCDL_BUILD_FLAGS) -C $(@D)
+	$(MAKE1) $(LPC32XXCDL_BUILD_FLAGS) -C $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/Burners/$(LPC32XXCDL_KICKSTART_BURNER)
+	$(MAKE1) $(LPC32XXCDL_BUILD_FLAGS) -C $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/$(LPC32XXCDL_KICKSTART)
+	$(MAKE1) $(LPC32XXCDL_BUILD_FLAGS) -C $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/Burners/$(LPC32XXCDL_S1L_BURNER)
+	$(MAKE1) $(LPC32XXCDL_BUILD_FLAGS) -C $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/$(LPC32XXCDL_S1L)
+endef
+
+define LPC32XXCDL_INSTALL_IMAGES_CMDS
+	cp $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/Burners/$(LPC32XXCDL_KICKSTART_BURNER)/*gnu.bin $(BINARIES_DIR)
+	cp $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/$(LPC32XXCDL_KICKSTART)/*gnu.bin $(BINARIES_DIR)
+	cp $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/Burners/$(LPC32XXCDL_S1L_BURNER)/*gnu.bin $(BINARIES_DIR)
+	cp $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/$(LPC32XXCDL_S1L)/*gnu.bin $(BINARIES_DIR)
+endef
+
+$(eval $(generic-package))

boot/mv-ddr-marvell/0001-Allow-access-to-low-addresses-with-gcc-12.patch

@@ -1,49 +0,0 @@
-From 4796a1eacc6a5ccb623e7d2e46a5196f8335e496 Mon Sep 17 00:00:00 2001
-From: Baruch Siach <baruch@tkos.co.il>
-Date: Fri, 11 Aug 2023 11:19:49 +0300
-Subject: [PATCH] Allow access to low addresses with gcc 12
-
-gcc 12 added a warning that triggers on access to low addresses. Add a
-compile option that allows access to lower addresses.
-
-Add the 'cc_option' macro to avoid the compile option when the compiler
-does not support it.
-
-This fixes build with TF-A. TF-A added a similar fix in commit
-dea23e245fb89.
-
-See some more details in
-https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105523
-
-Upstream: https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell/pull/42
-Signed-off-by: Baruch Siach <baruch@tkos.co.il>
----
- Makefile | 5 +++++
- 1 file changed, 5 insertions(+)
-
-diff --git a/Makefile b/Makefile
-index 3f0dd89a7381..045284c30cbc 100644
---- a/Makefile
-+++ b/Makefile
-@@ -108,6 +108,10 @@ MV_DDR_VER_CSRC = mv_ddr_build_message.c
- # create mv_ddr build message and version string source file
- $(shell $(MV_DDR_ROOT)/scripts/localversion.sh $(MV_DDR_ROOT) $(MV_DDR_VER_CSRC) 2> /dev/null)
- 
-+define cc_option
-+	$(shell if $(CC) $(1) -c -x c /dev/null -o /dev/null >/dev/null 2>&1; then echo $(1); fi )
-+endef
-+
- # ******************
- # U-BOOT SPL SUPPORT
- # ******************
-@@ -331,6 +335,7 @@ OBJ_DIR ?= $(MV_DDR_ROOT)
- CFLAGS = -DMV_DDR_ATF -DCONFIG_DDR4
- CFLAGS += -Wall -Werror -Os -ffreestanding -mlittle-endian -g -gdwarf-2 -nostdinc
- CFLAGS += -march=armv8-a -fpie
-+CFLAGS += $(call cc_option, --param=min-pagesize=0)
- 
- # PLATFORM is set in ble/ble.mk
- ifneq ($(findstring a80x0,$(PLATFORM)),)
--- 
-2.40.1
-

boot/mv-ddr-marvell/0001-Makefile-disable-stack-protection.patch

@@ -10,24 +10,25 @@ routines.
 The mv-ddr-marvell Makefile provides no way to add custom CFLAGS. Patch
 Makefile to disable stack protection.
 
-Upstream: not applicable; Buildroot specific
 Signed-off-by: Baruch Siach <baruch@tkos.co.il>
+---
+Upstream status: not applicable; Buildroot specific
 ---
  Makefile | 1 +
  1 file changed, 1 insertion(+)
 
 diff --git a/Makefile b/Makefile
-index 045284c30cbc..9641354bcf86 100644
+index 3f0dd89a7381..feae75cc16e4 100644
 --- a/Makefile
 +++ b/Makefile
-@@ -336,6 +336,7 @@ CFLAGS = -DMV_DDR_ATF -DCONFIG_DDR4
+@@ -331,6 +331,7 @@ OBJ_DIR ?= $(MV_DDR_ROOT)
+ CFLAGS = -DMV_DDR_ATF -DCONFIG_DDR4
  CFLAGS += -Wall -Werror -Os -ffreestanding -mlittle-endian -g -gdwarf-2 -nostdinc
  CFLAGS += -march=armv8-a -fpie
- CFLAGS += $(call cc_option, --param=min-pagesize=0)
 +CFLAGS += -fno-stack-protector
  
  # PLATFORM is set in ble/ble.mk
  ifneq ($(findstring a80x0,$(PLATFORM)),)
 -- 
-2.40.1
+2.35.1
 

boot/opensbi/Config.in

@@ -19,7 +19,7 @@ choice
 	  Select the specific OpenSBI version you want to use
 
 config BR2_TARGET_OPENSBI_LATEST_VERSION
-	bool "1.3"
+	bool "1.2"
 
 config BR2_TARGET_OPENSBI_CUSTOM_VERSION
 	bool "Custom version"
@@ -57,10 +57,10 @@ endif
 
 config BR2_TARGET_OPENSBI_VERSION
 	string
-	default "1.3" if BR2_TARGET_OPENSBI_LATEST_VERSION
+	default "1.2"	if BR2_TARGET_OPENSBI_LATEST_VERSION
 	default BR2_TARGET_OPENSBI_CUSTOM_VERSION_VALUE \
 		if BR2_TARGET_OPENSBI_CUSTOM_VERSION
-	default "custom" if BR2_TARGET_OPENSBI_CUSTOM_TARBALL
+	default "custom"	if BR2_TARGET_OPENSBI_CUSTOM_TARBALL
 	default BR2_TARGET_OPENSBI_CUSTOM_REPO_VERSION \
 		if BR2_TARGET_OPENSBI_CUSTOM_GIT
 

boot/opensbi/opensbi.hash

@@ -1,3 +1,3 @@
 # locally computed
-sha256  2c0501eb3475f463b15f5b8531996f64604ea49e0e3ed040ecbd1fc27ecd8c5c  opensbi-1.3.tar.gz
+sha256  8fcbce598a73acc2c7f7d5607d46b9d5107d3ecbede8f68f42631dcfc25ef2b2  opensbi-1.2.tar.gz
 sha256  82d13fb1bf6bb162629deeea9eb9c117e74548d3b707e478967691fe79a68e21  COPYING.BSD

boot/uboot/Config.in

@@ -262,15 +262,6 @@ config BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE
 	  This option makes sure that the i.MX firmwares are copied into
 	  the U-Boot source directory.
 
-config BR2_TARGET_UBOOT_NEEDS_ROCKCHIP_RKBIN
-	bool "U-Boot needs rockchip-rkbin"
-	depends on BR2_PACKAGE_ROCKCHIP_RKBIN
-	help
-	  For some Rockchip SoCs U-Boot needs binary blobs from
-	  Rockchip.
-	  This option makes sure that the needed binary blobs are copied
-	  into the U-Boot source directory.
-
 menu "U-Boot binary format"
 
 config BR2_TARGET_UBOOT_FORMAT_AIS
@@ -404,16 +395,6 @@ config BR2_TARGET_UBOOT_FORMAT_STM32
 	bool "u-boot.stm32"
 	depends on BR2_arm
 
-if BR2_TARGET_UBOOT_FORMAT_STM32
-config BR2_TARGET_UBOOT_BUILD_FORMAT_STM32_LEGACY
-	bool "Legacy build (u-boot.stm32 target)"
-	help
-	  Select this option if you use U-Boot with version older than
-	  2022.01), so that we use the old build target. Otherwise,
-	  binman application is called to create the stm32 binary
-	  format.
-endif
-
 config BR2_TARGET_UBOOT_FORMAT_CUSTOM
 	bool "Custom (specify below)"
 	help

boot/uboot/uboot.mk

@@ -133,10 +133,8 @@ endif
 
 ifeq ($(BR2_TARGET_UBOOT_FORMAT_STM32),y)
 UBOOT_BINS += u-boot.stm32
-ifeq ($(BR2_TARGET_UBOOT_BUILD_FORMAT_STM32_LEGACY),y)
 UBOOT_MAKE_TARGET += u-boot.stm32
 endif
-endif
 
 ifeq ($(BR2_TARGET_UBOOT_FORMAT_CUSTOM),y)
 UBOOT_BINS += $(call qstrip,$(BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME))
@@ -209,26 +207,8 @@ endef
 UBOOT_PRE_BUILD_HOOKS += UBOOT_COPY_IMX_FW_FILES
 endif
 
-ifeq ($(BR2_TARGET_UBOOT_NEEDS_ROCKCHIP_RKBIN),y)
-UBOOT_DEPENDENCIES += rockchip-rkbin
-define UBOOT_INSTALL_UBOOT_ROCKCHIP_BIN
-	$(INSTALL) -D -m 0644 $(@D)/u-boot-rockchip.bin $(BINARIES_DIR)/u-boot-rockchip.bin
-endef
-UBOOT_POST_INSTALL_IMAGES_HOOKS += UBOOT_INSTALL_UBOOT_ROCKCHIP_BIN
-ifneq ($(ROCKCHIP_RKBIN_BL31_FILENAME),)
-UBOOT_MAKE_OPTS += BL31=$(BINARIES_DIR)/$(notdir $(ROCKCHIP_RKBIN_BL31_FILENAME))
-endif
-ifneq ($(ROCKCHIP_RKBIN_TPL_FILENAME),)
-UBOOT_MAKE_OPTS += ROCKCHIP_TPL=$(BINARIES_DIR)/$(notdir $(ROCKCHIP_RKBIN_TPL_FILENAME))
-endif
-ifneq ($(ROCKCHIP_RKBIN_TEE_FILENAME),)
-UBOOT_MAKE_OPTS += TEE=$(BINARIES_DIR)/$(notdir $(ROCKCHIP_RKBIN_TEE_FILENAME))
-endif
-endif
-
 ifeq ($(BR2_TARGET_UBOOT_NEEDS_DTC),y)
 UBOOT_DEPENDENCIES += host-dtc
-UBOOT_MAKE_OPTS += DTC=$(HOST_DIR)/bin/dtc
 endif
 
 ifeq ($(BR2_TARGET_UBOOT_NEEDS_PYTHON3),y)
@@ -236,7 +216,7 @@ UBOOT_DEPENDENCIES += host-python3 host-python-setuptools
 endif
 
 ifeq ($(BR2_TARGET_UBOOT_NEEDS_PYLIBFDT),y)
-UBOOT_DEPENDENCIES += host-python-pylibfdt
+UBOOT_DEPENDENCIES += host-swig
 endif
 
 ifeq ($(BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS),y)

configs/andes_ae350_45_defconfig

@@ -38,6 +38,7 @@ BR2_TARGET_UBOOT_NEEDS_OPENSBI=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
 BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="ARCH_FLAGS=-march=rv64imafdc"
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y

configs/avenger96_defconfig

@@ -17,7 +17,7 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.9"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.2"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="stm32mp1"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="STM32MP_SDMMC=1 AARCH32_SP=sp_min DTB_FILE_NAME=stm32mp157a-avenger96.dtb"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_DEBUG=y
@@ -30,6 +30,5 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.07"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="stm32mp15_trusted"
 # BR2_TARGET_UBOOT_FORMAT_BIN is not set
 BR2_TARGET_UBOOT_FORMAT_STM32=y
-BR2_TARGET_UBOOT_BUILD_FORMAT_STM32_LEGACY=y
 BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=stm32mp15xx-dhcor-avenger96"
 BR2_PACKAGE_HOST_GENIMAGE=y

configs/beaglebone_defconfig

@@ -37,7 +37,6 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.04"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="am335x_evm"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 # BR2_TARGET_UBOOT_FORMAT_BIN is not set
 BR2_TARGET_UBOOT_FORMAT_IMG=y
 BR2_TARGET_UBOOT_SPL=y

configs/beaglebone_qt5_defconfig

@@ -15,7 +15,7 @@ BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,beagleboard,linux,4.19.7
 BR2_LINUX_KERNEL_DEFCONFIG="omap2plus"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/beaglebone/linux-sgx.fragment"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="am335x-evm am335x-bone am335x-boneblack am335x-bonegreen am335x-evmsk am335x-boneblue am335x-boneblack-wireless am335x-bonegreen-wireless"
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="am335x-evm am335x-bone am335x-boneblack am335x-bonegreen am335x-evmsk am335x-boneblue am335x-boneblack-wireless"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_PACKAGE_FBV=y
 BR2_PACKAGE_QT5=y

configs/beaglev_defconfig

@@ -1,7 +1,6 @@
 BR2_riscv=y
 BR2_riscv_custom=y
 BR2_RISCV_ISA_CUSTOM_RVM=y
-BR2_RISCV_ISA_CUSTOM_RVA=y
 BR2_RISCV_ISA_CUSTOM_RVF=y
 BR2_RISCV_ISA_CUSTOM_RVD=y
 BR2_RISCV_ISA_CUSTOM_RVC=y

configs/ci20_defconfig

@@ -15,7 +15,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/ci20/genimage.cfg"
 # kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.254"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.58"
 BR2_LINUX_KERNEL_DEFCONFIG="ci20"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 

configs/freescale_imx6qsabresd_defconfig

@@ -37,6 +37,7 @@ BR2_PACKAGE_HOST_MTOOLS=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="mx6qsabresd"
 BR2_TARGET_UBOOT_FORMAT_IMX=y
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,uboot-imx,lf-5.10.y-1.0.0)/uboot-imx-lf-5.10.y-1.0.0.tar.gz"
 BR2_TARGET_UBOOT_NEEDS_DTC=y

configs/hifive_unleashed_defconfig

@@ -2,7 +2,6 @@
 BR2_riscv=y
 BR2_riscv_custom=y
 BR2_RISCV_ISA_CUSTOM_RVM=y
-BR2_RISCV_ISA_CUSTOM_RVA=y
 BR2_RISCV_ISA_CUSTOM_RVF=y
 BR2_RISCV_ISA_CUSTOM_RVD=y
 BR2_RISCV_ISA_CUSTOM_RVC=y
@@ -28,7 +27,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.190"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10"
 BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/sifive/hifive-unleashed/linux.config.fragment"
 BR2_LINUX_KERNEL_IMAGE=y
@@ -43,14 +42,12 @@ BR2_TARGET_OPENSBI_CUSTOM_VERSION_VALUE="1.2"
 BR2_TARGET_OPENSBI_PLAT="generic"
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.04"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.01"
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sifive_unleashed"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sifive_fu540"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_NEEDS_OPENSBI=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
+BR2_TARGET_UBOOT_FORMAT_ITB=y
 BR2_TARGET_UBOOT_SPL=y
 
 # Host tools

configs/imx7d-sdb_defconfig

@@ -3,8 +3,8 @@ BR2_arm=y
 BR2_cortex_a7=y
 BR2_ARM_FPU_NEON_VFPV4=y
 
-# Linux headers same as kernel, a 6.1 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
+# Linux headers same as kernel, a 5.13 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_13=y
 
 # system
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
@@ -12,7 +12,7 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.34"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.13"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx7d-sdb"

configs/nitrogen6sx_defconfig

@@ -17,15 +17,15 @@ BR2_PACKAGE_HOST_UBOOT_TOOLS=y
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 
-# Linux headers same as kernel, a 6.1 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
+# Linux headers same as kernel, a 5.15 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
 
 # bootloader
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 # Latest revision of branch boundary-v2022.04
-BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot/archive/7e7eff74.tar.gz"
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot/archive/c2042594.tar.gz"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nitrogen6sx"
 BR2_TARGET_UBOOT_FORMAT_IMX=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
@@ -36,8 +36,8 @@ BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/boundarydevices/common/bo
 # kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-# Latest revision  of branch boundary-imx_6.1.y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux/archive/4470b050.tar.gz"
+# Latest revision  of branch boundary-imx_5.15.y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux/archive/97cc67c4.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="boundary"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y

configs/nitrogen6x_defconfig

@@ -16,15 +16,15 @@ BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 
-# Linux headers same as kernel, a 6.1 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
+# Linux headers same as kernel, a 5.15 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
 
 # bootloader
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 # Latest revision of branch boundary-v2022.04
-BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot/archive/7e7eff74.tar.gz"
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot/archive/c2042594.tar.gz"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nitrogen6q"
 BR2_TARGET_UBOOT_FORMAT_IMX=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
@@ -35,8 +35,8 @@ BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/boundarydevices/common/bo
 # kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-# Latest revision  of branch boundary-imx_6.1.y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux/archive/4470b050.tar.gz"
+# Latest revision  of branch boundary-imx_5.15.y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux/archive/97cc67c4.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="boundary"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y

configs/nitrogen7_defconfig

@@ -16,15 +16,15 @@ BR2_PACKAGE_HOST_UBOOT_TOOLS=y
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 
-# Linux headers same as kernel, a 6.1 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
+# Linux headers same as kernel, a 5.15 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
 
 # bootloader
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 # Latest revision of branch boundary-v2022.04
-BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot/archive/7e7eff74.tar.gz"
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot/archive/c2042594.tar.gz"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nitrogen7"
 BR2_TARGET_UBOOT_FORMAT_IMX=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
@@ -35,8 +35,8 @@ BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/boundarydevices/common/bo
 # kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-# Latest revision  of branch boundary-imx_6.1.y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux/archive/4470b050.tar.gz"
+# Latest revision  of branch boundary-imx_5.15.y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux/archive/97cc67c4.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="boundary"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y

configs/nitrogen8m_defconfig

@@ -18,8 +18,8 @@ BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 
-# Linux headers same as kernel, a 6.1 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
+# Linux headers same as kernel, a 5.15 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
 
 # DDR training binaries
 BR2_PACKAGE_FREESCALE_IMX=y
@@ -29,8 +29,8 @@ BR2_PACKAGE_FIRMWARE_IMX=y
 # ARM Trusted Firmware
 BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y
-# Latest revision of branch boundary-lf-6.1.22-2.0.0
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/imx-atf/archive/7e3484cc.tar.gz"
+# Latest revision of branch boundary-lf-5.15.52-2.1.0
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/imx-atf/archive/697a8319.tar.gz"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mq"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
 
@@ -40,7 +40,7 @@ BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nitrogen8m"
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 # Latest revision of branch boundary-v2022.04
-BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot/archive/7e7eff74.tar.gz"
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot/archive/c2042594.tar.gz"
 BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-nodtb.bin"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
@@ -51,8 +51,8 @@ BR2_TARGET_UBOOT_SPL=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-# Latest revision  of branch boundary-imx_6.1.y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux/archive/4470b050.tar.gz"
+# Latest revision  of branch boundary-imx_5.15.y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux/archive/97cc67c4.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="boundary"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INSTALL_TARGET=y

configs/nitrogen8mm_defconfig

@@ -18,8 +18,8 @@ BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 
-# Linux headers same as kernel, a 6.1 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
+# Linux headers same as kernel, a 5.15 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
 
 # DDR training binaries
 BR2_PACKAGE_FREESCALE_IMX=y
@@ -29,8 +29,8 @@ BR2_PACKAGE_FIRMWARE_IMX=y
 # ARM Trusted Firmware
 BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y
-# Latest revision of branch boundary-lf-6.1.22-2.0.0
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/imx-atf/archive/7e3484cc.tar.gz"
+# Latest revision of branch boundary-lf-5.15.52-2.1.0
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/imx-atf/archive/697a8319.tar.gz"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mm"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
 
@@ -40,7 +40,7 @@ BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nitrogen8mm_2g"
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 # Latest revision of branch boundary-v2022.04
-BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot/archive/7e7eff74.tar.gz"
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot/archive/c2042594.tar.gz"
 BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-nodtb.bin"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
@@ -51,8 +51,8 @@ BR2_TARGET_UBOOT_SPL=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-# Latest revision  of branch boundary-imx_6.1.y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux/archive/4470b050.tar.gz"
+# Latest revision  of branch boundary-imx_5.15.y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux/archive/97cc67c4.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="boundary"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INSTALL_TARGET=y

configs/nitrogen8mn_defconfig

@@ -18,8 +18,8 @@ BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 
-# Linux headers same as kernel, a 6.1 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
+# Linux headers same as kernel, a 5.15 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
 
 # DDR training binaries
 BR2_PACKAGE_FREESCALE_IMX=y
@@ -29,8 +29,8 @@ BR2_PACKAGE_FIRMWARE_IMX=y
 # ARM Trusted Firmware
 BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y
-# Latest revision of branch boundary-lf-6.1.22-2.0.0
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/imx-atf/archive/7e3484cc.tar.gz"
+# Latest revision of branch boundary-lf-5.15.52-2.1.0
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/imx-atf/archive/697a8319.tar.gz"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mn"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
 
@@ -40,7 +40,7 @@ BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nitrogen8_nano_8mn1gr0"
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 # Latest revision of branch boundary-v2022.04
-BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot/archive/7e7eff74.tar.gz"
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot/archive/c2042594.tar.gz"
 BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-nodtb.bin"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
@@ -51,8 +51,8 @@ BR2_TARGET_UBOOT_SPL=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-# Latest revision  of branch boundary-imx_6.1.y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux/archive/4470b050.tar.gz"
+# Latest revision  of branch boundary-imx_5.15.y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux/archive/97cc67c4.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="boundary"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INSTALL_TARGET=y

configs/nitrogen8mp_defconfig

@@ -18,8 +18,8 @@ BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 
-# Linux headers same as kernel, a 6.1 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
+# Linux headers same as kernel, a 5.15 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
 
 # DDR training binaries
 BR2_PACKAGE_FREESCALE_IMX=y
@@ -29,8 +29,8 @@ BR2_PACKAGE_FIRMWARE_IMX=y
 # ARM Trusted Firmware
 BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y
-# Latest revision of branch boundary-lf-6.1.22-2.0.0
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/imx-atf/archive/7e3484cc.tar.gz"
+# Latest revision of branch boundary-lf-5.15.52-2.1.0
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/imx-atf/archive/697a8319.tar.gz"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mp"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
 
@@ -40,7 +40,7 @@ BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nitrogen8mp_2gr0"
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 # Latest revision of branch boundary-v2022.04
-BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot/archive/7e7eff74.tar.gz"
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot/archive/c2042594.tar.gz"
 BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-nodtb.bin"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
@@ -51,10 +51,10 @@ BR2_TARGET_UBOOT_SPL=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-# Latest revision  of branch boundary-imx_6.1.y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux/archive/4470b050.tar.gz"
+# Latest revision  of branch boundary-imx_5.15.y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux/archive/97cc67c4.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="boundary"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mp-nitrogen_smarc freescale/imx8mp-nitrogen8mp freescale/imx8mp-nitrogen8mp-m4 freescale/imx8mp-nitrogen8mp-enc freescale/imx8mp-nitrogen8mp-enc-tc358743"
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mp-nitrogen8mp freescale/imx8mp-nitrogen8mp-m4 freescale/imx8mp-nitrogen8mp-enc freescale/imx8mp-nitrogen8mp-enc-tc358743"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y

configs/olimex_a20_olinuxino_lime2_defconfig

@@ -23,7 +23,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/olimex/a20_olinuxino/genimage.cfg"
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.38"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.22"
 BR2_LINUX_KERNEL_USE_DEFCONFIG=y
 BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/olimex/a20_olinuxino/linux-disable-lima.fragment"
@@ -45,7 +45,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.07"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.04"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="A20-OLinuXino-Lime2"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_NEEDS_PYTHON3=y

configs/olimex_a20_olinuxino_lime_defconfig

@@ -23,7 +23,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/olimex/a20_olinuxino/genimage.cfg"
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.38"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.22"
 BR2_LINUX_KERNEL_USE_DEFCONFIG=y
 BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/olimex/a20_olinuxino/linux-disable-lima.fragment"
@@ -45,7 +45,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.07"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.04"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="A20-OLinuXino-Lime"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_NEEDS_PYTHON3=y

configs/olimex_stmp157_olinuxino_lime_defconfig

@@ -17,8 +17,8 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/olimex/stmp1_olinuxino/genimage.cfg"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/OLIMEX/linux-olimex.git"
-# branch release-20230622-v5.10.180
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="fc74113e14d76aea9482264ff42e07397b94553d"
+# branch release-20230217-v5.10.105
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="c5a31724bdfaac894553b51c5a0fb92c1f10f3db"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/olimex/stmp1_olinuxino/linux.config"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
@@ -35,13 +35,12 @@ BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_GIT=y
 BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/OLIMEX/u-boot-olinuxino.git"
-# release-20230515, based on 2021.04
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="efadf793a0a5924e2c96362dc1df3e56622ebb97"
+# release-20230110, based on 2021.04
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="9a49a20f71c698f538defbb69a6c6cb657d4315f"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="STM32-OLinuXino-LIME"
 # BR2_TARGET_UBOOT_FORMAT_BIN is not set
 BR2_TARGET_UBOOT_FORMAT_IMG=y
 BR2_TARGET_UBOOT_FORMAT_STM32=y
-BR2_TARGET_UBOOT_BUILD_FORMAT_STM32_LEGACY=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl.stm32"
 

configs/pc_x86_64_bios_defconfig

@@ -32,7 +32,6 @@ BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/pc/linux.config"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y
 
 # Firmware
 BR2_PACKAGE_LINUX_FIRMWARE=y

configs/pc_x86_64_efi_defconfig

@@ -33,7 +33,6 @@ BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/pc/linux.config"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y
 
 # Firmware
 BR2_PACKAGE_LINUX_FIRMWARE=y

configs/qemu_m68k_mcf5208_defconfig

@@ -22,7 +22,6 @@ BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.26"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-mcf5208/linux.config"
-BR2_LINUX_KERNEL_PATCH="board/qemu/m68k-mcf5208/0001-m68k-Fix-invalid-.section-syntax.patch"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_m68k_q800_defconfig

@@ -22,7 +22,6 @@ BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.26"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-q800/linux.config"
-BR2_LINUX_KERNEL_PATCH="board/qemu/m68k-q800/0001-m68k-Fix-invalid-.section-syntax.patch"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_ppc64_e5500_defconfig

@@ -3,6 +3,7 @@ BR2_powerpc64=y
 BR2_powerpc_e5500=y
 
 # System
+BR2_BINUTILS_VERSION_2_38_X=y
 BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
 

configs/qemu_ppc64_pseries_defconfig

@@ -3,6 +3,7 @@ BR2_powerpc64=y
 BR2_powerpc_power7=y
 
 # System
+BR2_BINUTILS_VERSION_2_38_X=y
 BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_GENERIC_GETTY_PORT="hvc0"
 

configs/qemu_ppc64le_powernv8_defconfig

@@ -3,6 +3,7 @@ BR2_powerpc64le=y
 BR2_powerpc_power8=y
 
 # System
+BR2_BINUTILS_VERSION_2_38_X=y
 BR2_TARGET_GENERIC_GETTY_PORT="hvc0"
 BR2_SYSTEM_DHCP="eth0"
 

configs/qemu_ppc64le_pseries_defconfig

@@ -3,6 +3,7 @@ BR2_powerpc64le=y
 BR2_powerpc_power8=y
 
 # System
+BR2_BINUTILS_VERSION_2_38_X=y
 BR2_TARGET_GENERIC_GETTY_PORT="hvc0"
 BR2_SYSTEM_DHCP="eth0"
 

configs/qemu_sparc_ss10_defconfig

@@ -0,0 +1,28 @@
+# Architecture
+BR2_sparc=y
+BR2_sparc_v8=y
+
+# System
+BR2_SYSTEM_DHCP="eth0"
+
+# Filesystem
+BR2_TARGET_ROOTFS_EXT2=y
+# BR2_TARGET_ROOTFS_TAR is not set
+
+# Image
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)"
+
+# Linux headers same as kernel
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
+
+# Linux kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.26"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux.config"
+
+# host-qemu for gitlab testing
+BR2_PACKAGE_HOST_QEMU=y
+BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE=y

configs/rock5b_defconfig

@@ -1,41 +0,0 @@
-BR2_aarch64=y
-BR2_cortex_a76_a55=y
-BR2_KERNEL_HEADERS_5_10=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/radxa/rock5b/post-image.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS=""
-BR2_TARGET_GENERIC_HOSTNAME="rock5b"
-BR2_TARGET_GENERIC_ISSUE="Welcome to the rock5b board"
-BR2_GLOBAL_PATCH_DIR="board/radxa/rock5b/patches"
-BR2_SYSTEM_DHCP="eth0"
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/radxa/kernel.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="52f51a2b5ba178f331af62260d2da86d7472c14b"
-BR2_LINUX_KERNEL_DEFCONFIG="rockchip_linux"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3588-rock-5b"
-BR2_LINUX_KERNEL_DTB_OVERLAY_SUPPORT=y
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/radxa/rock5b/linux.fragment"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_TARGET_ROOTFS_EXT2_SIZE="250M"
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.07"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rock5b-rk3588"
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
-BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS=y
-BR2_TARGET_UBOOT_NEEDS_ROCKCHIP_RKBIN=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/radxa/rock5b/boot.cmd"
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_DTC=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_PACKAGE_ROCKCHIP_RKBIN=y
-BR2_PACKAGE_ROCKCHIP_RKBIN_TPL_FILENAME="bin/rk35/rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.12.bin"
-BR2_PACKAGE_ROCKCHIP_RKBIN_BL31_FILENAME="bin/rk35/rk3588_bl31_v1.40.elf"

configs/sipeed_maix_bit_sdcard_defconfig

@@ -17,7 +17,6 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y
 BR2_BINFMT_FLAT=y
 BR2_BINFMT_FLAT_ONE=y
 # BR2_TARGET_ENABLE_ROOT_LOGIN is not set
-BR2_GLOBAL_PATCH_DIR="board/canaan/k210-soc/patches"
 
 # Kernel
 BR2_LINUX_KERNEL=y

configs/sipeed_maix_dock_sdcard_defconfig

@@ -17,7 +17,6 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y
 BR2_BINFMT_FLAT=y
 BR2_BINFMT_FLAT_ONE=y
 # BR2_TARGET_ENABLE_ROOT_LOGIN is not set
-BR2_GLOBAL_PATCH_DIR="board/canaan/k210-soc/patches"
 
 # Kernel
 BR2_LINUX_KERNEL=y

configs/sipeed_maix_go_sdcard_defconfig

@@ -17,7 +17,6 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y
 BR2_BINFMT_FLAT=y
 BR2_BINFMT_FLAT_ONE=y
 # BR2_TARGET_ENABLE_ROOT_LOGIN is not set
-BR2_GLOBAL_PATCH_DIR="board/canaan/k210-soc/patches"
 
 # Kernel
 BR2_LINUX_KERNEL=y

configs/sipeed_maixduino_sdcard_defconfig

@@ -17,7 +17,6 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y
 BR2_BINFMT_FLAT=y
 BR2_BINFMT_FLAT_ONE=y
 # BR2_TARGET_ENABLE_ROOT_LOGIN is not set
-BR2_GLOBAL_PATCH_DIR="board/canaan/k210-soc/patches"
 
 # Kernel
 BR2_LINUX_KERNEL=y

configs/stm32f429_disco_xip_defconfig

@@ -14,7 +14,6 @@ BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="xipImage"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="stm32f429-disco"
 BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-minimal.config"
-BR2_PACKAGE_BUSYBOX_CONFIG_FRAGMENT_FILES="board/stmicroelectronics/common/stm32f4xx/busybox.fragment"
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 # BR2_TARGET_ROOTFS_TAR is not set

configs/stm32f469_disco_sd_defconfig

@@ -14,7 +14,6 @@ BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="zImage"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="stm32f469-disco"
 BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-minimal.config"
-BR2_PACKAGE_BUSYBOX_CONFIG_FRAGMENT_FILES="board/stmicroelectronics/common/stm32f4xx/busybox.fragment"
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_SIZE="32M"

configs/stm32f469_disco_xip_defconfig

@@ -14,7 +14,6 @@ BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="xipImage"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="stm32f469-disco"
 BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-minimal.config"
-BR2_PACKAGE_BUSYBOX_CONFIG_FRAGMENT_FILES="board/stmicroelectronics/common/stm32f4xx/busybox.fragment"
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 # BR2_TARGET_ROOTFS_TAR is not set

configs/stm32mp157a_dk1_defconfig

@@ -36,11 +36,10 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_DTC=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.04"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.10"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="stm32mp15_trusted"
 # BR2_TARGET_UBOOT_FORMAT_BIN is not set
 BR2_TARGET_UBOOT_FORMAT_STM32=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=stm32mp157a-dk1"
 

configs/stm32mp157c_dk2_defconfig

@@ -36,11 +36,10 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_DTC=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.04"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.10"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="stm32mp15_trusted"
 # BR2_TARGET_UBOOT_FORMAT_BIN is not set
 BR2_TARGET_UBOOT_FORMAT_STM32=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=stm32mp157c-dk2"
 

configs/stm32mp157c_odyssey_defconfig

@@ -29,7 +29,6 @@ BR2_TARGET_UBOOT_BOARD_DEFCONFIG="stm32mp15_trusted"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 # BR2_TARGET_UBOOT_FORMAT_BIN is not set
 BR2_TARGET_UBOOT_FORMAT_STM32=y
-BR2_TARGET_UBOOT_BUILD_FORMAT_STM32_LEGACY=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=stm32mp157c-odyssey"
 BR2_PACKAGE_HOST_GENIMAGE=y