Also known as the AOpen Chromebase Mini.
tiger and fievel are share the same board, tiger has a display and
touchscreen, fievel not. Use the fievel .dts as base and add the
extra bits.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
veyron jaq, jerry, minnie and speedy have mostly redundant regulator
and pinctrl configurations for the panel/backlight. Consolidate these
pieces in the eDP .dtsi.
Also change the default power supply for the panel to
'panel_regulator', instead of overriding it in all the board files.
pinky is the only device that uses 'vcc33_lcd' (the prior default),
so overwrite it in this case. pinky doesn't have a complete display
configuration, to keep things as they were delete the common nodes
that didn't exist previously in pinky's board file.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The chromebook .dtsi file contains common settings for veyron
Chromebooks with eDP displays. Some veyron devices with a display
aren't Chromebooks (e.g. 'tiger' aka 'AOpen Chromebase Mini'), move
display related bits from the chromebook .dtsi into a separate file
to avoid redundant DT settings.
The new file is included from the chromebook .dtsi and can be
included by non-Chromebook devices with a display.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The downstream Chrome OS 3.14 kernel for jerry limits WiFi TX power
through calibration data in the device tree [1]. Add a DT node for
the WiFi chip and use the downstream calibration data.
Not all calibration data entries have the length specified in the
binding (Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt),
however this is the data used by the downstream ('official') kernel
and the binding mentions that "the length can vary between hw
versions".
[1] https://crrev.com/c/271237
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The assigned register ranges for UART, SPI and I2C were too wasteful.
In order to avoid overlapping with the new functions on BCM2711
reduce the ranges.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Eric Anholt <eric@anholt.net>
Since A31, memory mapping of the IR driver has changed.
Prefer the A31 bindings instead of A13.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Sean Young <sean@mess.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Since A31, memory mapping of the IR driver has changed.
Prefer the A31 bindings instead of A13.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Sean Young <sean@mess.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
We are currently using a wrong register for dcan revision. Although
this is currently only used for detecting the dcan module, let's
fix it to avoid confusion.
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The ti,no-idle-on-init and ti,no-reset-on-init flags need to be at
the interconnect target module level for the modules that have it
defined. Otherwise we get the following warnings:
dts flag should be at module level for ti,no-idle-on-init
dts flag should be at module level for ti,no-reset-on-init
Reviewed-by: Suman Anna <s-anna@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
i.MX fixes for 5.3:
- Fix i.MX8MM SAI3 RXC/TXFS pinmux configuration.
- Fix i.MX7ULP usb-phy unit address to drop extra '0x' notation.
- Fix typo of clock frequency property name in a few i.MX6UL board
I2C buses.
- Drop "fsl,imx6sx-sai" from i.MX8M SAI device, as it's not compatible
with i.MX6SX SAI.
* tag 'imx-fixes-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mq: fix SAI compatible
arm64: dts: imx8mm: Correct SAI3 RXC/TXFS pin's mux option #1
ARM: dts: imx6ul: fix clock frequency property name of I2C buses
ARM: dts: imx7ulp: Fix usb-phy unit address format
Link: https://lore.kernel.org/r/20190723090827.GU15632@dragon
Signed-off-by: Olof Johansson <olof@lixom.net>
Even though the binding mentions that the PHY name must be "phy", it turns
out that all our DTs had "hdmi-phy" instead.
The code doesn't care about the phy-names property, so we can just change
our DTs to match the binding, without any side effect.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
simple-panel based bindings need only the display compatible, and
simple-panel isn't documented anywhere. Remove it.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
GIC is inside of SoC from architecture perspective, it should
be located inside of soc node in DT.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
GIC is inside of SoC from architecture perspective, it should
be located inside of soc node in DT.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
GIC is inside of SoC from architecture perspective, it should
be located inside of soc node in DT.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
GIC is inside of SoC from architecture perspective, it should
be located inside of soc node in DT.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The thermal driver for the DB8500 was never properly converted
to device tree, the node should definitely be activated for
all board variants so move this down into the main SoC
DTSI, and default on.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
CoreSight DT bindings have been updated, thus the old compatible strings
are obsolete and the drivers will report warning if DTS uses these
obsolete strings.
This patch switches to the new bindings for CoreSight dynamic funnel and
static replicator, so can dismiss warning during initialisation.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In addition to the PHYTEC phyCORE-i.MX 6UL the PHYTEC phyBOARD-Segin is
also available with the PHYTEC phyCORE-i.MX 6ULL. So this adds support
for this SOM and its baseboards.
It comes in a full featured option with either NAND flash or eMMC and in
a low cost option only available with NAND flash.
The hardware specs are:
- Full featured with NAND or eMMC:
* i.MX 6ULL Y2
* 512MB DDR3 memory
* 512MB NAND flash or 4GB/8GB eMMC
* Dual 10/100 Ethernet
* USB Host and USB OTG
* RS232
* MicroSD external storage
* Audio, RS232, I2C, SPI, CAN headers
* Further I/O options via A/V and Expansion headers
- Low cost with NAND:
* i.MX 6ULL Y0
* 256MB DDR3 memory
* 128MB NAND flash
* Single 10/100 Ethernet
* USB OTG
* RS232
* MicroSD external storage
* I2C
* Further I/O options via Expansion headers
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Move the imx6ul.dtsi include to the dts files so it is easier to reuse
the SOM dtsi for e.g. an i.MX 6ULL SOM.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The ECSPI interface is available on the expansion connector of every
PHYTEC phyBOARD-Segin. Move its definition to the board include file
for better reuse.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The phyCORE-i.MX 6UL/ULL now can have eMMC instead of the NAND flash
memory. Add the eMMC node and disable it by default so it can be enabled
in case it is populated.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The phyCORE-i.MX 6UL/ULL now comes either with NAND flash or eMMC. We
have to configure the populated memory type in the device tree files. So
the GPMI node gets disabled by default and only enabled if populated.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
To disable Ethernet interfaces in case they are not populated
make the FEC and Ethernet PHY status configurable in the dts files.
Also change the Ethernet PHYs labels to make them correspond to
the MDIO address.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fix node name for the user LEDs to prevent the pinctrl of the phyCORE's
leds node from being overwritten. Also use more generic names for user
LEDs.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Reduce the drive strength for the MDC, MDIO and TX pins of FEC1 and FEC2
on the phyBOARD-Segin to improve signal quality and EMC. Also disable
internal pull-ups on the MDC and MDIO pins.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There is now a PHYTEC phyCORE-i.MX 6UL with eMMC instead of NAND flash
available. The dts filename needs to reflect that to differentiate both.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Use the same name scheme for the phyBOARD-Segin and the phyCORE-i.MX
6UL as is used for the PHYTEC phyBOARD-Mira and phyCORE-i.MX 6.
This is only a cosmetic change and there is no functional change
intended.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add SGPM pinmux to ast2500-pinctrl function and group, to prepare for
supporting SGPIO in AST2500 SoC.
Signed-off-by: Hongwei Zhang <hongweiz@ami.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Adds voltage regulators Infineon pxe1610 devices to Facebook
tiogapass platform.
Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Initial introduction of Lenovo Hr855xg2 family equipped with
Aspeed 2500 BMC SoC. Hr855xg2 is a x86 server development kit
with a ASPEED ast2500 BMC manufactured by Lenovo.
This adds the Hr855xg2 platform device tree file used by the Hr855xg2
BMC machines.
Signed-off-by: Andrew Peng <pengms1@lenovo.com>
Signed-off-by: Yonghui Liu <liuyh21@lenovo.com>
Signed-off-by: Lisa Liu <liuyj19@lenovo.com>
Signed-off-by: Harry Sung <hsung1@lenovo.com>
Signed-off-by: Derek Lin <dlin23@lenovo.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add initial version of device tree for Facebook Minipack ast2500 BMC.
Signed-off-by: Tao Ren <taoren@fb.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
The DE2 bus takes two clocks, named bus and mod according to the binding.
However, the order of these clocks change from one SoC to another. Even
though it might not be an issue in most cases, having consistency will help
if we ever need to have some code to deal with deprecated bindings, and in
general it's just better.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
A few boards set clock frequency of their I2C buses with
"clock_frequency" property. The right property is "clock-frequency".
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The phy device tree property has been deprecated in favor of phy-handle,
let's replace it.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The DWMAC specific properties to manage the PHY have been superseeded by
the generic PHY properties. Let's move to it.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
To make use of the new eLCDIF DRM driver OF graph description is
required. Describe the display using OF graph nodes.
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The following warning is seen when building with W=1:
arch/arm/boot/dts/imx7ulp.dtsi:189.31-195.5: Warning (simple_bus_reg): /bus@40000000/usb-phy@0x40350000: simple-bus unit address format error, expected "40350000"
Fix it as suggested by removing the extra "0x" notation.
Fixes: 5b7bd45631 ("ARM: dts: imx7ulp: add imx7ulp USBOTG1 support")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Since commit 4664179fe6 ("ARM: dts: imx7s: Enable SNVS power key
according to board design") snvs_pwrkey is disabled by default, so there
is no need for disabling it explicitly in the board dts anymore.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Matthias Kaehlcke