Update for 2012.02

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

.defconfig

@@ -1,64 +1,54 @@
 #
 # Automatically generated make config: don't edit
+# Mon Feb 18 09:11:56 2008
 #
 BR2_HAVE_DOT_CONFIG=y
+# BR2_alpha is not set
 # BR2_arm is not set
 # BR2_armeb is not set
+# BR2_avr32 is not set
 # BR2_cris is not set
+# BR2_ia64 is not set
 BR2_i386=y
 # BR2_m68k is not set
 # BR2_mips is not set
 # BR2_mipsel is not set
+# BR2_nios2 is not set
 # BR2_powerpc is not set
 # BR2_sh is not set
+# BR2_sh64 is not set
 # BR2_sparc is not set
-BR2_ARCH="i386"
-BR2_WGET="wget --passive-ftp"
+# BR2_sparc64 is not set
+# BR2_x86_64 is not set
+# BR2_x86_i386 is not set
+# BR2_x86_i486 is not set
+# BR2_x86_i586 is not set
+BR2_x86_i686=y
+# BR2_x86_pentiumpro is not set
+# BR2_x86_pentium_mmx is not set
+# BR2_x86_pentium_m is not set
+# BR2_x86_pentium2 is not set
+# BR2_x86_pentium3 is not set
+# BR2_x86_pentium4 is not set
+# BR2_x86_prescott is not set
+# BR2_x86_nocona is not set
+# BR2_x86_core2 is not set
+# BR2_x86_k6 is not set
+# BR2_x86_k6_2 is not set
+# BR2_x86_athlon is not set
+# BR2_x86_athlon_4 is not set
+# BR2_x86_opteron is not set
+# BR2_x86_opteron_sse3 is not set
+# BR2_x86_barcelona is not set
+# BR2_x86_geode is not set
+# BR2_x86_c3 is not set
+# BR2_x86_winchip_c6 is not set
+# BR2_x86_winchip2 is not set
+BR2_ARCH="i686"
+BR2_ENDIAN="LITTLE"
+BR2_GCC_TARGET_TUNE="i686"
+BR2_GCC_TARGET_ARCH="i686"
 
 #
-# Toolchain Options
+# Target options
 #
-BR2_KERNEL_HEADERS_2_6_19_2=y
-BR2_DEFAULT_KERNEL_HEADERS="2.6.19.2"
-# BR2_UCLIBC_VERSION_SNAPSHOT is not set
-BR2_UCLIBC_VERSION_0_9_28_1=y
-# BR2_ENABLE_LOCALE is not set
-# BR2_BINUTILS_VERSION_2_14_90_0_8 is not set
-# BR2_BINUTILS_VERSION_2_15 is not set
-# BR2_BINUTILS_VERSION_2_15_94_0_2_2 is not set
-# BR2_BINUTILS_VERSION_2_16_1 is not set
-# BR2_BINUTILS_VERSION_2_16_90_0_3 is not set
-# BR2_BINUTILS_VERSION_2_16_91_0_5 is not set
-# BR2_BINUTILS_VERSION_2_16_91_0_6 is not set
-# BR2_BINUTILS_VERSION_2_16_91_0_7 is not set
-BR2_BINUTILS_VERSION_2_17=y
-# BR2_BINUTILS_VERSION_2_17_50_0_2 is not set
-# BR2_BINUTILS_VERSION_2_17_50_0_3 is not set
-# BR2_BINUTILS_VERSION_2_17_50_0_4 is not set
-# BR2_BINUTILS_VERSION_2_17_50_0_5 is not set
-# BR2_BINUTILS_VERSION_2_17_50_0_6 is not set
-# BR2_BINUTILS_VERSION_2_17_50_0_7 is not set
-# BR2_BINUTILS_VERSION_2_17_50_0_8 is not set
-# BR2_BINUTILS_VERSION_2_17_50_0_9 is not set
-# BR2_BINUTILS_VERSION is not set
-# BR2_GCC_VERSION_3_3_5 is not set
-# BR2_GCC_VERSION_3_3_6 is not set
-# BR2_GCC_VERSION_3_4_2 is not set
-# BR2_GCC_VERSION_3_4_3 is not set
-# BR2_GCC_VERSION_3_4_4 is not set
-# BR2_GCC_VERSION_3_4_5 is not set
-# BR2_GCC_VERSION_3_4_6 is not set
-# BR2_GCC_VERSION_4_0_0 is not set
-# BR2_GCC_VERSION_4_0_1 is not set
-# BR2_GCC_VERSION_4_0_2 is not set
-# BR2_GCC_VERSION_4_0_3 is not set
-# BR2_GCC_VERSION_4_1_0 is not set
-BR2_GCC_VERSION_4_1_1=y
-BR2_GCC_USE_SJLJ_EXCEPTIONS="--enable-sjlj-exceptions"
-BR2_EXTRA_GCC_CONFIG_OPTIONS=""
-# BR2_INSTALL_LIBSTDCPP is not set
-# BR2_PACKAGE_GDB is not set
-# BR2_PACKAGE_GDB_SERVER is not set
-# BR2_ENABLE_MULTILIB is not set
-BR2_LARGEFILE=y
-BR2_TARGET_OPTIMIZATION="-Os -pipe"

.gitignore

@@ -0,0 +1,14 @@
+/output
+/dl
+/.auto.deps
+/.config.cmd
+/.config.old
+/..config.tmp
+/.config
+*.depend
+*.o
+/*.patch
+/*.diff
+*.orig
+*.rej
+*~

COPYING

@@ -0,0 +1,339 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Lesser General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License along
+    with this program; if not, write to the Free Software Foundation, Inc.,
+    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.

Config.in

@@ -1,220 +1,52 @@
 #
 
-mainmenu "Buildroot2 Configuration"
+mainmenu "Buildroot $BR2_VERSION Configuration"
 
 config BR2_HAVE_DOT_CONFIG
 	bool
 	default y
 
-choice
-	prompt "Target Architecture"
-	default BR2_i386
-	help
-	  Select the target architecture family to build for.
-
-config BR2_alpha
-	bool "alpha"
-config BR2_arm
-	bool "arm"
-config BR2_armeb
-	bool "armeb"
-config BR2_avr32
-	bool "avr32"
-config BR2_cris
-	bool "cris"
-config BR2_i386
-	bool "i386"
-config BR2_m68k
-	bool "m68k"
-config BR2_mips
-	bool "mips"
-config BR2_mipsel
-	bool "mipsel"
-config BR2_nios2
-	bool "nios2"
-config BR2_powerpc
-	bool "powerpc"
-config BR2_sh
-	bool "superh"
-config BR2_sh64
-	bool "superh64"
-config BR2_sparc
-	bool "sparc"
-config BR2_x86_64
-	bool "x86_64"
-endchoice
-
-#
-# Keep the variants separate, there's no need to clutter everything else.
-# sh is fairly "special" in this regard, as virtually everyone else has
-# things kept down to a _sensible_ number of target variants. No such
-# luck for sh..
-#
-choice
-	prompt "Target Architecture Variant"
-	depends BR2_arm || BR2_armeb
-	default BR2_generic_arm
-	help
-	  Specific CPU variant to use
-
-config BR2_generic_arm
-	bool "generic_arm"
-config BR2_arm610
-	bool "arm610"
-config BR2_arm710
-	bool "arm710"
-config BR2_arm720t
-	bool "arm720t"
-config BR2_arm920t
-	bool "arm920t"
-config BR2_arm922t
-	bool "arm922t"
-config BR2_arm926t
-	bool "arm926t"
-config BR2_arm1136jf_s
-	bool "arm1136jf_s"
-config BR2_arm1176jz_s
-	bool "arm1176jz-s"
-config BR2_arm1176jzf_s
-	bool "arm1176jzf-s"
-config BR2_sa110
-	bool "sa110"
-config BR2_sa1100
-	bool "sa1100"
-config BR2_xscale
-	bool "xscale"
-config BR2_iwmmxt
-	bool "iwmmxt"
-endchoice
-
-config BR2_ARM_TYPE
+config BR2_VERSION
 	string
-	default ARM610		if BR2_arm610
-	default ARM710		if BR2_arm710
-	default ARM720T		if BR2_arm720t
-	default ARM920T		if BR2_arm920t
-	default ARM922T		if BR2_arm922t
-	default ARM926T		if BR2_arm926t
-	default ARM1136JF_S 	if BR2_arm1136jf_s
-	default ARM1176JZ_S	if BR2_arm1176jz_s
-	default ARM1176JZF_S	if BR2_arm1176jzf_s
-	default ARM_SA110	if BR2_sa110
-	default ARM_SA1100	if BR2_sa1100
-	default ARM_XSCALE	if BR2_xscale
-	default ARM_IWMMXT	if BR2_iwmmxt
-	default GENERIC_ARM	if BR2_generic_arm
+	option env="BR2_VERSION_FULL"
 
-choice
-	prompt "Target ABI"
-	depends BR2_arm || BR2_armeb
-	default BR2_ARM_OABI
-	help
-	  Application Binary Interface to use
-
-config BR2_ARM_OABI
-	bool "OABI"
-config BR2_ARM_EABI
-	bool "EABI"
-endchoice
-
-choice
-	prompt "Target Architecture Variant"
-	depends BR2_avr32
-config BR2_ap7000
-	bool "AP7000"
-config BR2_ap7010
-	bool "AP7010"
-config BR2_ap7020
-	bool "AP7020"
-endchoice
-
-
-choice
-	prompt "Target Architecture Variant"
-	depends BR2_sh
-	default BR2_sh4
-	help
-	  Specific CPU variant to use
-
-config BR2_sh2a_nofpueb
-	bool "sh2a_nofpueb"
-config BR2_sh2eb
-	bool "sh2eb"
-config BR2_sh3
-	bool "sh3"
-config BR2_sh3eb
-	bool "sh3eb"
-config BR2_sh4
-	bool "sh4"
-config BR2_sh4eb
-	bool "sh4eb"
-endchoice
-
-#
-# gcc builds libstdc++ differently depending on the
-# host tuplet given to it, so let people choose
-#
-choice
-	prompt "Target Architecture Variant"
-	depends BR2_i386
-	default BR2_x86_i686
-	help
-	  Specific CPU variant to use
-
-config BR2_x86_i386
-	bool "i386"
-config BR2_x86_i486
-	bool "i486"
-config BR2_x86_i586
-	bool "i586"
-config BR2_x86_i686
-	bool "i686"
-endchoice
-
-config BR2_ARCH
-	string
-	default "alpha"		if BR2_alpha
-	default "arm"		if BR2_arm
-	default "armeb"		if BR2_armeb
-	default "avr32"		if BR2_avr32
-	default "cris"		if BR2_cris
-	default "i386"		if BR2_x86_i386
-	default "i486"		if BR2_x86_i486
-	default "i586"		if BR2_x86_i586
-	default "i686"		if BR2_x86_i686
-	default "m68k"		if BR2_m68k
-	default "mips"		if BR2_mips
-	default "mipsel"	if BR2_mipsel
-	default "nios2"		if BR2_nios2
-	default "powerpc"	if BR2_powerpc
-	default "sh2a_nofpueb"	if BR2_sh2a_nofpueb
-	default "sh2eb"		if BR2_sh2eb
-	default "sh3"		if BR2_sh3
-	default "sh3eb"		if BR2_sh3eb
-	default "sh4"		if BR2_sh4
-	default "sh4eb"		if BR2_sh4eb
-	default "sh64"		if BR2_sh64
-	default "sparc"		if BR2_sparc
-	default "x86_64"	if BR2_x86_64
-
-config BR2_ENDIAN
-	string
-	default "LITTLE" if BR2_arm || BR2_cris || BR2_i386 || BR2_mipsel || \
-	                    BR2_sh3 || BR2_sh4 || BR2_x86_64 || BR2_nios2 || \
-			    BR2_sh64
-	default "BIG"    if BR2_alpha || BR2_armeb || BR2_avr32 || BR2_m68k || BR2_mips || \
-	                    BR2_powerpc || BR2_sh2a_nofpueb || BR2_sh2eb || \
-	                    BR2_sh3eb || BR2_sh4eb || BR2_sparc
+source "target/Config.in.arch"
 
 menu "Build options"
 
+menu "Commands"
+
 config BR2_WGET
 	string "Wget command"
-	default "wget --passive-ftp -nd"
+	default "wget --passive-ftp -nd -t 3"
 
 config BR2_SVN
-	string "Subversion (svn) checkout command"
-	default "svn co"
+	string "Subversion (svn) command"
+	default "svn"
+
+config BR2_BZR
+	string "Bazaar (bzr) command"
+	default "bzr"
+
+config BR2_GIT
+	string "Git command"
+	default "git"
+
+config BR2_LOCALFILES
+	string "Local files retrieval command"
+	default "cp"
+
+config BR2_SCP
+	string "Secure copy (scp) command"
+	default "scp"
+
+config BR2_SSH
+	string "Secure shell (ssh) command"
+	default "ssh"
+
+config BR2_HG
+	string "Mercurial (hg) command"
+	default "hg"
 
 config BR2_ZCAT
 	string "zcat command"
@@ -236,6 +68,13 @@ config BR2_BZCAT
 	  Default is "bzcat"
 	  Other possible values include "bunzip2 -c" or "bzip2 -d -c".
 
+config BR2_XZCAT
+	string "xzcat command"
+	default "xzcat"
+	help
+	  Command to be used to extract a xz'ed file to stdout.
+	  Default is "xzcat"
+
 config BR2_TAR_OPTIONS
 	string "Tar options"
 	default ""
@@ -244,139 +83,298 @@ config BR2_TAR_OPTIONS
 	  E.g. " -v --exclude='*.svn*'" to exclude all .svn internal files
 	  and to be verbose.
 
+endmenu
+
 config BR2_DL_DIR
 	string "Download dir"
-	default "$(BASE_DIR)/dl"
+	default "$(TOPDIR)/dl"
 	help
 	  Directory to store all the source files that we need to fetch.
+	  If the Linux shell environment has defined the BUILDROOT_DL_DIR
+	  environment variable, then this overrides this configuration item.
+
+	  The default is $(TOPDIR)/dl
+
+config BR2_HOST_DIR
+	string "Host dir"
+	default "$(BASE_DIR)/host"
+	help
+	  Directory to store all the binary files that are built for the host.
+	  This includes the cross compilation toolchain when building the
+	  internal buildroot toolchain.
+
+	  The default is $(BASE_DIR)/host
+
+menu "Mirrors and Download locations"
+
+config BR2_PRIMARY_SITE
+	string "Primary download site"
+	default ""
+	help
+	  Primary site to download from. If this option is set then buildroot
+	  will try to download package source first from this site and try the
+	  default if the file is not found.
+	  Valid URIs are URIs recognized by $(WGET) and scp URIs of the form
+	  scp://[user@]host:path.
+	  NOTE: This works for all packages using the central package
+	  infrastructure (generic, autotools, cmake, ...)
+
+config BR2_BACKUP_SITE
+	string "Backup download site"
+	default "http://sources.buildroot.net/"
+	help
+	  Backup site to download from. If this option is set then buildroot
+	  will fall back to download package sources from here if the
+	  normal location fails.
 
 config BR2_SOURCEFORGE_MIRROR
 	string "Sourceforge mirror site"
-	default "easynews"
+	default "kent"
 	help
-	  Sourceforge has a system of mirror sites.  Some sites may be closer
-	  to your location, and sometimes mirror sites go down and are no longer
-	  available.  This option allows you to select your preferred Sourceforge
-	  mirror site.
+	  Sourceforge has a system of mirror sites.  Some sites may be
+	  closer to your location, and sometimes mirror sites go down
+	  and are no longer available.  This option allows you to select
+	  your preferred Sourceforge mirror site.
 
 	  The list of mirrors is available here:
-	  http://prdownloads.sourceforge.net/index-sf.html?download
+	  http://sourceforge.net/apps/trac/sourceforge/wiki/Mirrors
 
-config BR2_ATMEL_MIRROR
-	depends BR2_avr32 || BR2_arm
-	string "Atmel AVR32/AT91 download site"
-	default "ftp://at91dist:distrib@81.80.104.162/AT91_Third_Party_Design_Flow/Linux_Host/"
+config BR2_KERNEL_MIRROR
+	string "Kernel.org mirror"
+	default "http://www.kernel.org/pub/"
 	help
-	  Unofficial site for AVR32/AT91 Buildroot patches, or your local mirror.
-	  Atmel does not currently support buildroot, but this site makes
-	  available neccessary patches and prepatched packages useful
-	  to extend a buildroot for AVR32 or AT91 ARM based boards.
-	  Issues with contents of this server needs to be highlighted
-	  on the buildroot mailing list and
-	  should not be addressed directly to Atmel
-	  Atmel provides support for their AVR32 chips on 
-	  http://avr32linux.org/ or http://www.avrfreaks.net/
-	  Atmel provides support for AT91 chips on www.at91.com.
-	  Commercial AT91 Linux support is through www.timesys.com
-	  Community  AT91 Linux support is through http://maxim.org.za/AT91_26.html
+	  kernel.org is mirrored on a number of servers around the world.
+	  The following allows you to select your preferred mirror.
 
-config BR2_AT91_PATCH_MIRROR
-	depends BR2_arm
-	string "Atmel AT91 Linux Patch download site"
-	default "http://maxim.org.za/AT91RM9200/2.6/"
+	  Have a look on the kernel.org site for a list of mirrors, then enter
+	  the URL to the base directory.  Examples:
+
+	     http://www.XX.kernel.org/pub (XX = country code)
+	     http://mirror.aarnet.edu.au/pub/ftp.kernel.org
+
+config BR2_GNU_MIRROR
+	string "GNU Software mirror"
+	default "http://ftp.gnu.org/pub/gnu"
 	help
-	  Patches for the AT91 generated by the Linux community
-	  usually ends up here, courtesy of Andrew Victor
-	  
-config BR2_STAGING_DIR
-	string "Toolchain and header file location?"
-	default "$(BUILD_DIR)/staging_dir"
+	  GNU has multiple software mirrors scattered around the world.
+	  The following allows you to select your preferred mirror.
+
+	  Have a look on the gnu.org site for a list of mirrors, then enter
+	  the URL to the base directory.  Examples:
+
+	     http://ftp.gnu.org/pub/gnu
+	     http://mirror.aarnet.edu.au/pub/gnu
+
+config BR2_DEBIAN_MIRROR
+	string "Debian Software mirror"
+	default "http://ftp.debian.org"
 	help
-	  This is the location where the toolchain will be installed.  The
-	  toolchain will not work if it is moved from this location.
-	  Therefore, if you wish to package up a uClibc toolchain, it is
-	  important that is is set to the final location where the toolchain
-	  will be used.
+	  Debian has multiple software mirrors scattered around the world.
+	  The following allows you to select your preferred mirror.
 
-	  Most people will leave this set to the default value of
-	  "$(BUILD_DIR)/staging_dir".
+	  Usually, just add your country code like XX here:
+	  http://ftp.XX.debian.org
 
-config BR2_TOPDIR_PREFIX
-	string "Custom build dir prefix"
-	default ""
-	help
-	  Add a custom string to the beginning of the build directories.
-
-	  build_ARCH -> [PREFIX]_build_ARCH
-	  toolchain_build_ARCH -> [PREFIX]_toolchain_build_ARCH
-
-config BR2_TOPDIR_SUFFIX
-	string "Custom build dir suffix"
-	default ""
-	help
-	  Add a custom string to the end of the build directories.
-
-	  build_ARCH -> build_ARCH_[SUFFIX]
-	  toolchain_build_ARCH -> toolchain_build_ARCH_[SUFFIX] 
-
-config BR2_GNU_BUILD_SUFFIX
-	string "GNU build hostname suffix"
-	default "pc-linux-gnu"
-	help
-	  The string used to pass to configure scripts via the
-	  --build= option.  Just specify the suffix here, the leading
-	  arch will be filled in automatically.
-
-	  Here's some copy and paste build host options for you:
-	      linux:   pc-linux-gnu
-	      cygwin:  pc-cygwin
-	      os x:    apple-darwin7 / apple-darwin8
-
-config BR2_GNU_TARGET_SUFFIX
-	string "GNU target suffix"
-	default "linux-uclibcgnueabi" if BR2_ARM_EABI
-	default "linux-uclibc"
-	help
-	  The string used to pass to configure scripts via the
-	  --target= option.  Just specify the suffix here, the leading
-	  arch will be filled in automatically.
-
-	  Most users will want to stick with the default setting, though
-	  other users (most notably ARM EABI) like to add on to this in
-	  order to stay in line with gcc conventions.
-
-	  Default options are:
-	      linux-uclibcgnueabi for ARM EABI
-	      linux-uclibc for the rest
+endmenu
 
 config BR2_JLEVEL
 	int "Number of jobs to run simultaneously"
-	default "1"
+	default "2"
 	help
 	  Number of jobs to run simultaneously
 
-config BR2_PREFER_IMA
-	bool "prefer IMA compiles"
-	default n
+config BR2_CCACHE
+	bool "Enable compiler cache"
 	help
-	  Where possible, compile package with Inter Module Analysis.
-	  This potentially uses alot of system resources on your compile
-	  host with the benefit of creating smaller binaries for the target.
-
-	  If unsure, say No.
-
-	  WARNING: This is highly experimental at the moment.
+	  This option will enable the use of ccache, a compiler
+	  cache. It will cache the result of previous builds to speed
+	  up future builds. The cache is stored in
+	  $HOME/.buildroot-ccache.
 
 config BR2_DEPRECATED
 	bool "Show packages that are deprecated or obsolete"
-	default n
 	help
 	  This option hides outdated/obsolete versions of packages.
 
+config BR2_ENABLE_DEBUG
+	bool "build packages with debugging symbols"
+	select BR2_PACKAGE_GDB_SERVER
+	help
+	  Build packages with debugging symbols
+	  enabled
+
+if BR2_ENABLE_DEBUG
+choice
+	prompt "gcc debug level"
+	default BR2_DEBUG_2
+	help
+	  Set the debug level for gcc
+
+config BR2_DEBUG_1
+	bool "debug level 1"
+	help
+	  Debug level 1 produces minimal information, enough
+	  for making backtraces in parts of the program that
+	  you don't plan to debug. This includes descriptions
+	  of functions and external variables, but no information
+	  about local variables and no line numbers.
+
+config BR2_DEBUG_2
+	bool "debug level 2"
+	help
+	  The default gcc debug level is 2
+
+config BR2_DEBUG_3
+	bool "debug level 3"
+	help
+	  Level 3 includes extra information, such as all the
+	  macro definitions present in the program. Some debuggers
+	  support macro expansion when you use -g3.
+endchoice
+endif
+
+choice
+	prompt "strip"
+	default BR2_STRIP_strip
+	help
+	  Select whether to strip binaries and libraries for the target
+	  or not.
+	  strip   is the normal strip command
+	  sstrip  is a strip that discards more than the normal strip
+	  none    do not strip (only for debugging!)
+
+config BR2_STRIP_strip
+	bool "strip"
+	depends on !BR2_ELF2FLT
+	help
+	  strip   is the normal strip command
+
+config BR2_STRIP_sstrip
+	bool "sstrip"
+	select BR2_PACKAGE_SSTRIP_HOST
+	depends on !BR2_ELF2FLT
+	help
+	  sstrip  is a strip that discards more than the normal strip
+
+config BR2_STRIP_none
+	bool "none"
+	help
+	  none    do not strip (only for debugging!)
+endchoice
+
+choice
+	prompt "gcc optimization level"
+	default BR2_OPTIMIZE_S
+	help
+	  Set the optimization level for gcc
+
+config BR2_OPTIMIZE_0
+	bool "optimization level 0"
+	help
+	  Do not optimize. This is the default.
+
+config BR2_OPTIMIZE_1
+	bool "optimization level 1"
+	help
+	  Optimize. Optimizing compilation takes somewhat more time,
+	  and a lot more memory for a large function. With -O, the
+	  compiler tries to reduce code size and execution time,
+	  without performing any optimizations that take a great deal
+	  of compilation time. -O turns on the following optimization
+	  flags: -fdefer-pop -fdelayed-branch -fguess-branch-probability
+	  -fcprop-registers -floop-optimize -fif-conversion
+	  -fif-conversion2 -ftree-ccp -ftree-dce -ftree-dominator-opts
+	  -ftree-dse -ftree-ter -ftree-lrs -ftree-sra -ftree-copyrename
+	  -ftree-fre -ftree-ch -funit-at-a-time -fmerge-constants
+	  -O also turns on -fomit-frame-pointer on machines where doing
+	  so does not interfere with debugging.
+
+config BR2_OPTIMIZE_2
+	bool "optimization level 2"
+	help
+	  Optimize even more. GCC performs nearly all supported optimizations
+	  that do not involve a space-speed tradeoff. The compiler does not
+	  perform loop unrolling or function inlining when you specify -O2.
+	  As compared to -O, this option increases both compilation time and
+	  the performance of the generated code. -O2 turns on all optimization
+	  flags specified by -O. It also turns on the following optimization
+	  flags: -fthread-jumps -fcrossjumping -foptimize-sibling-calls
+	  -fcse-follow-jumps -fcse-skip-blocks -fgcse  -fgcse-lm
+	  -fexpensive-optimizations -fstrength-reduce -frerun-cse-after-loop
+	  -frerun-loop-opt -fcaller-saves -fpeephole2 -fschedule-insns
+	  -fschedule-insns2 -fsched-interblock -fsched-spec -fregmove
+	  -fstrict-aliasing -fdelete-null-pointer-checks -freorder-blocks
+	  -freorder-functions -falign-functions -falign-jumps -falign-loops
+	  -falign-labels -ftree-vrp -ftree-pre
+	  Please note the warning under -fgcse about invoking -O2 on programs
+	  that use computed gotos.
+
+config BR2_OPTIMIZE_3
+	bool "optimization level 3"
+	help
+	  Optimize yet more. -O3 turns on all optimizations specified by -O2
+	  and also turns on the -finline-functions, -funswitch-loops and
+	  -fgcse-after-reload options.
+
+config BR2_OPTIMIZE_S
+	bool "optimize for size"
+	help
+	  Optimize for size. -Os enables all -O2 optimizations that do not
+	  typically increase code size. It also performs further optimizations
+	  designed to reduce code size. -Os disables the following optimization
+	  flags: -falign-functions -falign-jumps -falign-loops -falign-labels
+	  -freorder-blocks -freorder-blocks-and-partition -fprefetch-loop-arrays
+	  -ftree-vect-loop-version
+
+endchoice
+
+config BR2_PREFER_STATIC_LIB
+	bool "prefer static libraries"
+	help
+	  Where possible, build and use static libraries for the target.
+	  This potentially increases your code size and should only be
+	  used if you know what you do.
+	  The default is to build dynamic libraries and use those on
+	  the target filesystem.
+
+	  WARNING: This is highly experimental at the moment.
+
+config BR2_HAVE_DOCUMENTATION
+	bool "documentation on the target"
+	help
+	  Install the documentation, including manual pages and info
+	  pages, on the target.
+	  If you say n here, your target will not contain any
+	  documentation.
+
+config BR2_HAVE_DEVFILES
+	bool "development files in target filesystem"
+	help
+	  Install headers and static libraries in the
+	  target filesystem
+
+config BR2_PACKAGE_OVERRIDE_FILE
+	string "location of a package override file"
+	default "$(TOPDIR)/local.mk"
+	help
+	  A package override file is a short makefile that contains
+	  variable definitions of the form <pkg>_OVERRIDE_SRCDIR,
+	  which allows to tell Buildroot to use an existing directory
+	  as the source directory for a particular package. See the
+	  Buildroot documentation for more details on this feature.
+
 endmenu
 
 source "toolchain/Config.in"
 
+source "target/generic/Config.in"
+
 source "package/Config.in"
 
-source "target/Config.in"
+source "package/Config.in.host"
+
+source "fs/Config.in"
+
+source "boot/Config.in"
+
+source "linux/Config.in"

Makefile

@@ -1,6 +1,7 @@
 # Makefile for buildroot2
 #
 # Copyright (C) 1999-2005 by Erik Andersen <andersen@codepoet.org>
+# Copyright (C) 2006-2011 by the Buildroot developers <buildroot@uclibc.org>
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -21,41 +22,275 @@
 # Just run 'make menuconfig', configure stuff, then run 'make'.
 # You shouldn't need to mess with anything beyond this point...
 #--------------------------------------------------------------
-TOPDIR=./
-CONFIG_CONFIG_IN = Config.in
-CONFIG_DEFCONFIG = .defconfig
-CONFIG = package/config
 
-noconfig_targets := menuconfig config oldconfig randconfig \
-	defconfig allyesconfig allnoconfig release tags    \
+# Set and export the version string
+export BR2_VERSION:=2012.02
 
-#	$(shell find . -name *_defconfig |sed 's/.*\///')
+# Check for minimal make version (note: this check will break at make 10.x)
+MIN_MAKE_VERSION=3.81
+ifneq ($(firstword $(sort $(MAKE_VERSION) $(MIN_MAKE_VERSION))),$(MIN_MAKE_VERSION))
+$(error You have make '$(MAKE_VERSION)' installed. GNU make >= $(MIN_MAKE_VERSION) is required)
+endif
+
+# This top-level Makefile can *not* be executed in parallel
+.NOTPARALLEL:
+
+# absolute path
+TOPDIR:=$(shell pwd)
+CONFIG_CONFIG_IN=Config.in
+CONFIG=support/kconfig
+DATE:=$(shell date +%Y%m%d)
+
+# Compute the full local version string so packages can use it as-is
+# Need to export it, so it can be got from environment in children (eg. mconf)
+export BR2_VERSION_FULL:=$(BR2_VERSION)$(shell $(TOPDIR)/support/scripts/setlocalversion)
+
+noconfig_targets:=menuconfig nconfig gconfig xconfig config oldconfig randconfig \
+	defconfig %_defconfig savedefconfig allyesconfig allnoconfig silentoldconfig release \
+	randpackageconfig allyespackageconfig allnopackageconfig \
+	source-check
+
+# Strip quotes and then whitespaces
+qstrip=$(strip $(subst ",,$(1)))
+#"))
+
+# Variables for use in Make constructs
+comma:=,
+empty:=
+space:=$(empty) $(empty)
+
+ifneq ("$(origin O)", "command line")
+O:=output
+CONFIG_DIR:=$(TOPDIR)
+NEED_WRAPPER=
+else
+# other packages might also support Linux-style out of tree builds
+# with the O=<dir> syntax (E.G. Busybox does). As make automatically
+# forwards command line variable definitions those packages get very
+# confused. Fix this by telling make to not do so
+MAKEOVERRIDES =
+# strangely enough O is still passed to submakes with MAKEOVERRIDES
+# (with make 3.81 atleast), the only thing that changes is the output
+# of the origin function (command line -> environment).
+# Unfortunately some packages don't look at origin (E.G. uClibc 0.9.31+)
+# To really make O go away, we have to override it.
+override O:=$(O)
+CONFIG_DIR:=$(O)
+# we need to pass O= everywhere we call back into the toplevel makefile
+EXTRAMAKEARGS = O=$(O)
+NEED_WRAPPER=y
+endif
 
 # Pull in the user's configuration file
 ifeq ($(filter $(noconfig_targets),$(MAKECMDGOALS)),)
--include $(TOPDIR).config
+-include $(CONFIG_DIR)/.config
 endif
 
-ifeq ($(strip $(BR2_HAVE_DOT_CONFIG)),y)
+# Override BR2_DL_DIR if shell variable defined
+ifneq ($(BUILDROOT_DL_DIR),)
+BR2_DL_DIR:=$(BUILDROOT_DL_DIR)
+endif
+
+# To put more focus on warnings, be less verbose as default
+# Use 'make V=1' to see the full commands
+ifdef V
+  ifeq ("$(origin V)", "command line")
+    KBUILD_VERBOSE=$(V)
+  endif
+endif
+ifndef KBUILD_VERBOSE
+  KBUILD_VERBOSE=0
+endif
+
+ifeq ($(KBUILD_VERBOSE),1)
+  quiet=
+  Q=
+ifndef VERBOSE
+  VERBOSE=1
+endif
+else
+  quiet=quiet_
+  Q=@
+endif
+
+# we want bash as shell
+SHELL:=$(shell if [ -x "$$BASH" ]; then echo $$BASH; \
+	else if [ -x /bin/bash ]; then echo /bin/bash; \
+	else echo sh; fi; fi)
+
+# kconfig uses CONFIG_SHELL
+CONFIG_SHELL:=$(SHELL)
+
+export SHELL CONFIG_SHELL quiet Q KBUILD_VERBOSE VERBOSE
+
+ifndef HOSTAR
+HOSTAR:=ar
+endif
+ifndef HOSTAS
+HOSTAS:=as
+endif
+ifndef HOSTCC
+HOSTCC:=gcc
+HOSTCC:=$(shell which $(HOSTCC) || type -p $(HOSTCC) || echo gcc)
+endif
+HOSTCC_NOCCACHE:=$(HOSTCC)
+ifndef HOSTCXX
+HOSTCXX:=g++
+HOSTCXX:=$(shell which $(HOSTCXX) || type -p $(HOSTCXX) || echo g++)
+endif
+HOSTCXX_NOCCACHE:=$(HOSTCXX)
+ifndef HOSTFC
+HOSTFC:=gfortran
+endif
+ifndef HOSTCPP
+HOSTCPP:=cpp
+endif
+ifndef HOSTLD
+HOSTLD:=ld
+endif
+ifndef HOSTLN
+HOSTLN:=ln
+endif
+ifndef HOSTNM
+HOSTNM:=nm
+endif
+HOSTAR:=$(shell which $(HOSTAR) || type -p $(HOSTAR) || echo ar)
+HOSTAS:=$(shell which $(HOSTAS) || type -p $(HOSTAS) || echo as)
+HOSTFC:=$(shell which $(HOSTLD) || type -p $(HOSTLD) || echo || which g77 || type -p g77 || echo gfortran)
+HOSTCPP:=$(shell which $(HOSTCPP) || type -p $(HOSTCPP) || echo cpp)
+HOSTLD:=$(shell which $(HOSTLD) || type -p $(HOSTLD) || echo ld)
+HOSTLN:=$(shell which $(HOSTLN) || type -p $(HOSTLN) || echo ln)
+HOSTNM:=$(shell which $(HOSTNM) || type -p $(HOSTNM) || echo nm)
+
+export HOSTAR HOSTAS HOSTCC HOSTCXX HOSTFC HOSTLD
+export HOSTCC_NOCCACHE HOSTCXX_NOCCACHE
+
+# bash prints the name of the directory on 'cd <dir>' if CDPATH is
+# set, so unset it here to not cause problems. Notice that the export
+# line doesn't affect the environment of $(shell ..) calls, so
+# explictly throw away any output from 'cd' here.
+export CDPATH:=
+BASE_DIR := $(shell mkdir -p $(O) && cd $(O) >/dev/null && pwd)
+$(if $(BASE_DIR),, $(error output directory "$(O)" does not exist))
+
+BUILD_DIR:=$(BASE_DIR)/build
+
+
+ifeq ($(BR2_HAVE_DOT_CONFIG),y)
 
 # cc-option
-# Usage: cflags-y += $(call cc-option, -march=winchip-c6, -march=i586)
+# Usage: cflags-y+=$(call cc-option, -march=winchip-c6, -march=i586)
 # sets -march=winchip-c6 if supported else falls back to -march=i586
 # without checking the latter.
-cc-option = $(shell if $(TARGET_CC) $(TARGET_CFLAGS) $(1) -S -o /dev/null -xc /dev/null \
+cc-option=$(shell if $(TARGET_CC) $(TARGET_CFLAGS) $(1) -S -o /dev/null -xc /dev/null \
 	> /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi ;)
 
 #############################################################
 #
+# Hide troublesome environment variables from sub processes
+#
+#############################################################
+unexport CROSS_COMPILE
+unexport ARCH
+unexport CC
+unexport CXX
+unexport CPP
+unexport CFLAGS
+unexport CXXFLAGS
+unexport GREP_OPTIONS
+unexport CONFIG_SITE
+
+GNU_HOST_NAME:=$(shell support/gnuconfig/config.guess)
+
+#############################################################
+#
+# Setup the proper filename extensions for the host
+#
+##############################################################
+ifneq ($(findstring linux,$(GNU_HOST_NAME)),)
+HOST_EXEEXT:=
+HOST_LIBEXT:=.a
+HOST_SHREXT:=.so
+endif
+ifneq ($(findstring apple,$(GNU_HOST_NAME)),)
+HOST_EXEEXT:=
+HOST_LIBEXT:=.a
+HOST_SHREXT:=.dylib
+endif
+ifneq ($(findstring cygwin,$(GNU_HOST_NAME)),)
+HOST_EXEEXT:=.exe
+HOST_LIBEXT:=.lib
+HOST_SHREXT:=.dll
+HOST_LOADLIBES=-lcurses -lintl
+export HOST_LOADLIBES
+endif
+ifneq ($(findstring mingw,$(GNU_HOST_NAME)),)
+HOST_EXEEXT:=.exe
+HOST_LIBEXT:=.lib
+HOST_SHREXT:=.dll
+endif
+
+##############################################################
+#
 # The list of stuff to build for the target toolchain
 # along with the packages to build for the target.
 #
 ##############################################################
-ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y)
-TARGETS:=uclibc-configured binutils gcc uclibc-target-utils
-else
-TARGETS:=uclibc
+
+ifeq ($(BR2_CCACHE),y)
+BASE_TARGETS += host-ccache
 endif
+
+ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y)
+BASE_TARGETS += uclibc-configured host-binutils cross_compiler uclibc-target-utils kernel-headers
+else
+BASE_TARGETS += uclibc
+endif
+TARGETS:=
+
+# silent mode requested?
+QUIET:=$(if $(findstring s,$(MAKEFLAGS)),-q)
+
+# Strip off the annoying quoting
+ARCH:=$(call qstrip,$(BR2_ARCH))
+ifeq ($(ARCH),xtensa)
+ARCH:=$(ARCH)_$(call qstrip,$(BR2_xtensa_core_name))
+endif
+
+KERNEL_ARCH:=$(shell echo "$(ARCH)" | sed -e "s/-.*//" \
+	-e s/i.86/i386/ -e s/sun4u/sparc64/ \
+	-e s/arm.*/arm/ -e s/sa110/arm/ \
+	-e s/bfin/blackfin/ \
+	-e s/parisc64/parisc/ \
+	-e s/powerpc64/powerpc/ \
+	-e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
+	-e s/sh.*/sh/)
+
+ZCAT:=$(call qstrip,$(BR2_ZCAT))
+BZCAT:=$(call qstrip,$(BR2_BZCAT))
+XZCAT:=$(call qstrip,$(BR2_XZCAT))
+TAR_OPTIONS=$(call qstrip,$(BR2_TAR_OPTIONS)) -xf
+
+GNU_TARGET_SUFFIX:=-$(call qstrip,$(BR2_GNU_TARGET_SUFFIX))
+
+# packages compiled for the host go here
+HOST_DIR:=$(call qstrip,$(BR2_HOST_DIR))
+
+# stamp (dependency) files go here
+STAMP_DIR:=$(BASE_DIR)/stamps
+
+BINARIES_DIR:=$(BASE_DIR)/images
+TARGET_DIR:=$(BASE_DIR)/target
+TOOLCHAIN_DIR=$(BASE_DIR)/toolchain
+TARGET_SKELETON=$(TOPDIR)/fs/skeleton
+
+ifeq ($(BR2_CCACHE),y)
+CCACHE:=$(HOST_DIR)/usr/bin/ccache
+CCACHE_CACHE_DIR=$(HOME)/.buildroot-ccache
+HOSTCC  := $(CCACHE) $(HOSTCC)
+HOSTCXX := $(CCACHE) $(HOSTCXX)
+endif
+
 include toolchain/Makefile.in
 include package/Makefile.in
 
@@ -66,32 +301,103 @@ include package/Makefile.in
 #
 #############################################################
 
+all: world
 
-
-all:   world
-
-# In this section, we need .config
-include .config.cmd
+include support/dependencies/dependencies.mk
 
 # We also need the various per-package makefiles, which also add
 # each selected package to TARGETS if that package was selected
 # in the .config file.
-include toolchain/*/*.mk
+ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y)
+include toolchain/toolchain-buildroot.mk
+else ifeq ($(BR2_TOOLCHAIN_EXTERNAL),y)
+include toolchain/toolchain-external.mk
+else ifeq ($(BR2_TOOLCHAIN_CTNG),y)
+include toolchain/toolchain-crosstool-ng.mk
+endif
+
+# Include the package override file if one has been provided in the
+# configuration.
+PACKAGE_OVERRIDE_FILE=$(call qstrip,$(BR2_PACKAGE_OVERRIDE_FILE))
+ifneq ($(PACKAGE_OVERRIDE_FILE),)
+-include $(PACKAGE_OVERRIDE_FILE)
+endif
+
 include package/*/*.mk
 
-# target stuff is last so it can override anything else
+include boot/common.mk
 include target/Makefile.in
+include linux/linux.mk
+
+TARGETS+=target-finalize
+
+ifeq ($(BR2_ENABLE_LOCALE_PURGE),y)
+TARGETS+=target-purgelocales
+endif
+
+include fs/common.mk
+
+TARGETS+=erase-fakeroots
 
 TARGETS_CLEAN:=$(patsubst %,%-clean,$(TARGETS))
-TARGETS_SOURCE:=$(patsubst %,%-source,$(TARGETS))
+TARGETS_SOURCE:=$(patsubst %,%-source,$(TARGETS) $(BASE_TARGETS))
 TARGETS_DIRCLEAN:=$(patsubst %,%-dirclean,$(TARGETS))
+TARGETS_ALL:=$(patsubst %,__real_tgt_%,$(TARGETS))
 
-world: $(DL_DIR) $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) $(TARGETS)
-dirs: $(DL_DIR) $(BUILD_DIR) $(STAGING_DIR)
+# host-* dependencies have to be handled specially, as those aren't
+# visible in Kconfig and hence not added to a variable like TARGETS.
+# instead, find all the host-* targets listed in each <PKG>_DEPENDENCIES
+# variable for each enabled target.
+# Notice: this only works for newstyle gentargets/autotargets packages
+TARGETS_HOST_DEPS = $(sort $(filter host-%,$(foreach dep,\
+		$(addsuffix _DEPENDENCIES,$(call UPPERCASE,$(TARGETS))),\
+		$($(dep)))))
+# Host packages can in turn have their own dependencies. Likewise find
+# all the package names listed in the HOST_<PKG>_DEPENDENCIES for each
+# host package found above. Ideally this should be done recursively until
+# no more packages are found, but that's hard to do in make, so limit to
+# 1 level for now.
+HOST_DEPS = $(sort $(foreach dep,\
+		$(addsuffix _DEPENDENCIES,$(call UPPERCASE,$(TARGETS_HOST_DEPS))),\
+		$($(dep))))
+HOST_SOURCE += $(addsuffix -source,$(sort $(TARGETS_HOST_DEPS) $(HOST_DEPS)))
 
-.PHONY: all world dirs clean dirclean distclean source $(TARGETS) \
+# all targets depend on the crosscompiler and it's prerequisites
+$(TARGETS_ALL): __real_tgt_%: $(BASE_TARGETS) %
+
+dirs: $(DL_DIR) $(TOOLCHAIN_DIR) $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
+	$(HOST_DIR) $(BINARIES_DIR) $(STAMP_DIR)
+
+$(BASE_TARGETS): dirs $(O)/toolchainfile.cmake
+
+$(BUILD_DIR)/buildroot-config/auto.conf: $(CONFIG_DIR)/.config
+	$(MAKE) $(EXTRAMAKEARGS) HOSTCC="$(HOSTCC_NOCCACHE)" HOSTCXX="$(HOSTCXX_NOCCACHE)" silentoldconfig
+
+prepare: $(BUILD_DIR)/buildroot-config/auto.conf
+
+world: prepare dirs dependencies $(BASE_TARGETS) $(TARGETS_ALL)
+
+$(O)/toolchainfile.cmake:
+	@echo -en "\
+	set(CMAKE_SYSTEM_NAME Linux)\n\
+	set(CMAKE_C_COMPILER $(TARGET_CC_NOCCACHE))\n\
+	set(CMAKE_CXX_COMPILER $(TARGET_CXX_NOCCACHE))\n\
+	set(CMAKE_C_FLAGS \"\$${CMAKE_C_FLAGS} $(TARGET_CFLAGS)\" CACHE STRING \"Buildroot CFLAGS\" FORCE)\n\
+	set(CMAKE_CXX_FLAGS \"\$${CMAKE_CXX_FLAGS} $(TARGET_CXXFLAGS)\" CACHE STRING \"Buildroot CXXFLAGS\" FORCE)\n\
+	set(CMAKE_INSTALL_SO_NO_EXE 0)\n\
+	set(CMAKE_PROGRAM_PATH \"$(HOST_DIR)/usr/bin\")\n\
+	set(CMAKE_FIND_ROOT_PATH \"$(STAGING_DIR)\")\n\
+	set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER)\n\
+	set(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY)\n\
+	set(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY)\n\
+	set(ENV{PKG_CONFIG_SYSROOT_DIR} \"$(STAGING_DIR)\")\n\
+	" > $@
+
+.PHONY: all world dirs clean distclean source outputmakefile \
+	$(BASE_TARGETS) $(TARGETS) $(TARGETS_ALL) \
 	$(TARGETS_CLEAN) $(TARGETS_DIRCLEAN) $(TARGETS_SOURCE) \
-	$(DL_DIR) $(BUILD_DIR) $(TOOL_BUILD_DIR) $(STAGING_DIR)
+	$(DL_DIR) $(TOOLCHAIN_DIR) $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
+	$(HOST_DIR) $(BINARIES_DIR) $(STAMP_DIR)
 
 #############################################################
 #
@@ -99,117 +405,362 @@ dirs: $(DL_DIR) $(BUILD_DIR) $(STAGING_DIR)
 # dependencies anywhere else
 #
 #############################################################
-$(DL_DIR) $(BUILD_DIR) $(TOOL_BUILD_DIR):
+$(DL_DIR) $(TOOLCHAIN_DIR) $(BUILD_DIR) $(HOST_DIR) $(BINARIES_DIR) $(STAMP_DIR):
 	@mkdir -p $@
 
 $(STAGING_DIR):
 	@mkdir -p $(STAGING_DIR)/bin
 	@mkdir -p $(STAGING_DIR)/lib
-	@mkdir -p $(STAGING_DIR)/include
-	@mkdir -p $(STAGING_DIR)/usr
-	@mkdir -p $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)
-	@ln -snf ../include $(STAGING_DIR)/usr/include
-	@ln -snf ../lib $(STAGING_DIR)/usr/lib
-	@ln -snf ../lib $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib
+	@mkdir -p $(STAGING_DIR)/usr/lib
+	@mkdir -p $(STAGING_DIR)/usr/include
+	@mkdir -p $(STAGING_DIR)/usr/bin
+	@ln -snf $(STAGING_DIR) $(BASE_DIR)/staging
 
-$(TARGET_DIR):
-	mkdir -p $(TARGET_DIR)
-	if [ -d "$(TARGET_SKELETON)" ] ; then \
-		cp -fa $(TARGET_SKELETON)/* $(TARGET_DIR)/; \
-	fi;
-	touch $(STAGING_DIR)/.fakeroot.00000
-	-find $(TARGET_DIR) -type d -name CVS | xargs rm -rf
-	-find $(TARGET_DIR) -type d -name .svn | xargs rm -rf
-
-source: $(TARGETS_SOURCE) $(HOST_SOURCE)
-
-#############################################################
-#
-# Cleanup and misc junk
-#
-#############################################################
-clean: $(TARGETS_CLEAN)
-	rm -rf $(STAGING_DIR) $(TARGET_DIR) $(IMAGE)
-
-dirclean: $(TARGETS_DIRCLEAN)
-	rm -rf $(STAGING_DIR) $(TARGET_DIR) $(IMAGE)
-
-distclean:
-ifeq ($(DL_DIR),$(BASE_DIR)/dl)
-	rm -rf $(DL_DIR)
+ifeq ($(BR2_ROOTFS_SKELETON_CUSTOM),y)
+TARGET_SKELETON=$(BR2_ROOTFS_SKELETON_CUSTOM_PATH)
 endif
-	rm -rf $(BUILD_DIR) $(LINUX_KERNEL) $(IMAGE)
-	$(MAKE) -C $(CONFIG) clean
 
-sourceball:
-	rm -rf $(BUILD_DIR)
-	set -e; \
-	cd ..; \
-	rm -f buildroot.tar.bz2; \
-	tar -cvf buildroot.tar buildroot; \
-	bzip2 -9 buildroot.tar; \
+$(BUILD_DIR)/.root:
+	mkdir -p $(TARGET_DIR)
+	if ! [ -d "$(TARGET_DIR)/bin" ]; then \
+		if [ -d "$(TARGET_SKELETON)" ]; then \
+			cp -fa $(TARGET_SKELETON)/* $(TARGET_DIR)/; \
+		fi; \
+		touch $(STAGING_DIR)/.fakeroot.00000; \
+	fi
+	-find $(TARGET_DIR) -type d -name CVS -print0 -o -name .svn -print0 | xargs -0 rm -rf
+	-find $(TARGET_DIR) -type f \( -name .empty -o -name '*~' \) -print0 | xargs -0 rm -rf
+	touch $@
 
+$(TARGET_DIR): $(BUILD_DIR)/.root
 
-else # ifeq ($(strip $(BR2_HAVE_DOT_CONFIG)),y)
+erase-fakeroots:
+	rm -f $(BUILD_DIR)/.fakeroot*
+
+target-finalize:
+ifeq ($(BR2_HAVE_DEVFILES),y)
+	( support/scripts/copy.sh $(STAGING_DIR) $(TARGET_DIR) )
+else
+	rm -rf $(TARGET_DIR)/usr/include $(TARGET_DIR)/usr/lib/pkgconfig $(TARGET_DIR)/usr/share/aclocal
+	find $(TARGET_DIR)/lib \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f
+	find $(TARGET_DIR)/usr/lib \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f
+endif
+ifneq ($(BR2_PACKAGE_GDB),y)
+	rm -rf $(TARGET_DIR)/usr/share/gdb
+endif
+ifneq ($(BR2_HAVE_DOCUMENTATION),y)
+	rm -rf $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/man
+	rm -rf $(TARGET_DIR)/usr/info $(TARGET_DIR)/usr/share/info
+	rm -rf $(TARGET_DIR)/usr/doc $(TARGET_DIR)/usr/share/doc
+	rm -rf $(TARGET_DIR)/usr/share/gtk-doc
+	-rmdir $(TARGET_DIR)/usr/share 2>/dev/null
+endif
+ifeq ($(BR2_PACKAGE_PYTHON_PY_ONLY),y)
+	find $(TARGET_DIR)/usr/lib/ -name '*.pyc' -print0 | xargs -0 rm -f
+endif
+ifeq ($(BR2_PACKAGE_PYTHON_PYC_ONLY),y)
+	find $(TARGET_DIR)/usr/lib/ -name '*.py' -print0 | xargs -0 rm -f
+endif
+	find $(TARGET_DIR) -type f -perm +111 '!' -name 'libthread_db*.so*' | \
+		xargs $(STRIPCMD) 2>/dev/null || true
+	find $(TARGET_DIR)/lib/modules -type f -name '*.ko' | \
+		xargs -r $(KSTRIPCMD) || true
+
+	mkdir -p $(TARGET_DIR)/etc
+	# Mandatory configuration file and auxilliary cache directory
+	# for recent versions of ldconfig
+	touch $(TARGET_DIR)/etc/ld.so.conf
+	mkdir -p $(TARGET_DIR)/var/cache/ldconfig
+	if [ -x "$(TARGET_CROSS)ldconfig" ]; \
+	then \
+		$(TARGET_CROSS)ldconfig -r $(TARGET_DIR); \
+	else \
+		/sbin/ldconfig -r $(TARGET_DIR); \
+	fi
+	echo $(BR2_VERSION_FULL) > $(TARGET_DIR)/etc/br-version
+
+ifneq ($(BR2_ROOTFS_POST_BUILD_SCRIPT),"")
+	$(BR2_ROOTFS_POST_BUILD_SCRIPT) $(TARGET_DIR)
+endif
+
+ifeq ($(BR2_ENABLE_LOCALE_PURGE),y)
+LOCALE_WHITELIST=$(BUILD_DIR)/locales.nopurge
+LOCALE_NOPURGE=$(call qstrip,$(BR2_ENABLE_LOCALE_WHITELIST))
+
+target-purgelocales:
+	rm -f $(LOCALE_WHITELIST)
+	for i in $(LOCALE_NOPURGE); do echo $$i >> $(LOCALE_WHITELIST); done
+
+	for dir in $(wildcard $(addprefix $(TARGET_DIR),/usr/share/locale /usr/share/X11/locale /usr/man /usr/share/man)); \
+	do \
+		for lang in $$(cd $$dir; ls .|grep -v man); \
+		do \
+			grep -qx $$lang $(LOCALE_WHITELIST) || rm -rf $$dir/$$lang; \
+		done; \
+	done
+endif
+
+source: dirs $(TARGETS_SOURCE) $(HOST_SOURCE)
+
+external-deps:
+	@$(MAKE) -Bs DL_MODE=SHOW_EXTERNAL_DEPS $(EXTRAMAKEARGS) source | sort -u
+
+show-targets:
+	@echo $(TARGETS)
+
+else # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
 
 all: menuconfig
 
 # configuration
 # ---------------------------------------------------------------------------
 
-$(CONFIG)/conf:
-	$(MAKE) -C $(CONFIG) conf
-	-@if [ ! -f .config ] ; then \
-		cp $(CONFIG_DEFCONFIG) .config; \
-	fi
-$(CONFIG)/mconf:
-	$(MAKE) -C $(CONFIG) ncurses conf mconf
-	-@if [ ! -f .config ] ; then \
-		cp $(CONFIG_DEFCONFIG) .config; \
-	fi
+HOSTCFLAGS=$(CFLAGS_FOR_BUILD)
+export HOSTCFLAGS
 
-menuconfig: $(CONFIG)/mconf
-	@$(CONFIG)/mconf $(CONFIG_CONFIG_IN)
+$(BUILD_DIR)/buildroot-config/%onf:
+	mkdir -p $(@D)/lxdialog
+	$(MAKE) CC="$(HOSTCC_NOCCACHE)" HOSTCC="$(HOSTCC_NOCCACHE)" obj=$(@D) -C $(CONFIG) -f Makefile.br $(@F)
 
-config: $(CONFIG)/conf
-	@$(CONFIG)/conf $(CONFIG_CONFIG_IN)
+COMMON_CONFIG_ENV = \
+	KCONFIG_AUTOCONFIG=$(BUILD_DIR)/buildroot-config/auto.conf \
+	KCONFIG_AUTOHEADER=$(BUILD_DIR)/buildroot-config/autoconf.h \
+	KCONFIG_TRISTATE=$(BUILD_DIR)/buildroot-config/tristate.config \
+	BUILDROOT_CONFIG=$(CONFIG_DIR)/.config
 
-oldconfig: $(CONFIG)/conf
-	@$(CONFIG)/conf -o $(CONFIG_CONFIG_IN)
+xconfig: $(BUILD_DIR)/buildroot-config/qconf outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	@$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
 
-randconfig: $(CONFIG)/conf
-	@$(CONFIG)/conf -r $(CONFIG_CONFIG_IN)
+gconfig: $(BUILD_DIR)/buildroot-config/gconf outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	@$(COMMON_CONFIG_ENV) srctree=$(TOPDIR) $< $(CONFIG_CONFIG_IN)
 
-allyesconfig: $(CONFIG)/conf
-	#@$(CONFIG)/conf -y $(CONFIG_CONFIG_IN)
-	#sed -i -e "s/^CONFIG_DEBUG.*/# CONFIG_DEBUG is not set/" .config
-	@$(CONFIG)/conf -o $(CONFIG_CONFIG_IN)
+menuconfig: $(BUILD_DIR)/buildroot-config/mconf outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	@$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
 
-allnoconfig: $(CONFIG)/conf
-	@$(CONFIG)/conf -n $(CONFIG_CONFIG_IN)
+nconfig: $(BUILD_DIR)/buildroot-config/nconf outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	@$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
 
-defconfig: $(CONFIG)/conf
-	@$(CONFIG)/conf -d $(CONFIG_CONFIG_IN)
+config: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	@$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
 
-%_defconfig: $(CONFIG)/conf
-	cp $(shell find . -name $@) .config
-	@$(CONFIG)/conf -o $(CONFIG_CONFIG_IN)
+oldconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	mkdir -p $(BUILD_DIR)/buildroot-config
+	@$(COMMON_CONFIG_ENV) $< --oldconfig $(CONFIG_CONFIG_IN)
+
+randconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	@$(COMMON_CONFIG_ENV) $< --randconfig $(CONFIG_CONFIG_IN)
+
+allyesconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	@$(COMMON_CONFIG_ENV) $< --allyesconfig $(CONFIG_CONFIG_IN)
+
+allnoconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	@$(COMMON_CONFIG_ENV) $< --allnoconfig $(CONFIG_CONFIG_IN)
+
+randpackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	@grep -v BR2_PACKAGE_ $(CONFIG_DIR)/.config > $(CONFIG_DIR)/.config.nopkg
+	@$(COMMON_CONFIG_ENV) \
+		KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
+		$< --randconfig $(CONFIG_CONFIG_IN)
+	@rm -f $(CONFIG_DIR)/.config.nopkg
+
+allyespackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	@grep -v BR2_PACKAGE_ $(CONFIG_DIR)/.config > $(CONFIG_DIR)/.config.nopkg
+	@$(COMMON_CONFIG_ENV) \
+		KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
+		$< --allyesconfig $(CONFIG_CONFIG_IN)
+	@rm -f $(CONFIG_DIR)/.config.nopkg
+
+allnopackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	@grep -v BR2_PACKAGE_ $(CONFIG_DIR)/.config > $(CONFIG_DIR)/.config.nopkg
+	@$(COMMON_CONFIG_ENV) \
+		KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
+		$< --allnoconfig $(CONFIG_CONFIG_IN)
+	@rm -f $(CONFIG_DIR)/.config.nopkg
+
+silentoldconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	$(COMMON_CONFIG_ENV) $< --silentoldconfig $(CONFIG_CONFIG_IN)
+
+defconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	@$(COMMON_CONFIG_ENV) $< --defconfig $(CONFIG_CONFIG_IN)
+
+%_defconfig: $(BUILD_DIR)/buildroot-config/conf $(TOPDIR)/configs/%_defconfig outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	@$(COMMON_CONFIG_ENV) $< --defconfig=$(TOPDIR)/configs/$@ $(CONFIG_CONFIG_IN)
+
+savedefconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	@$(COMMON_CONFIG_ENV) $< --savedefconfig=$(CONFIG_DIR)/defconfig $(CONFIG_CONFIG_IN)
+
+# check if download URLs are outdated
+source-check: allyesconfig
+	$(MAKE) DL_MODE=SOURCE_CHECK $(EXTRAMAKEARGS) source
+
+endif # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
 
 #############################################################
 #
 # Cleanup and misc junk
 #
 #############################################################
+
+# outputmakefile generates a Makefile in the output directory, if using a
+# separate output directory. This allows convenient use of make in the
+# output directory.
+outputmakefile:
+ifeq ($(NEED_WRAPPER),y)
+	$(Q)$(TOPDIR)/support/scripts/mkmakefile $(TOPDIR) $(O)
+endif
+
 clean:
-	rm -f .config .config.old .config.cmd .tmpconfig.h
-	- $(MAKE) -C $(CONFIG) clean
+	rm -rf $(STAGING_DIR) $(TARGET_DIR) $(BINARIES_DIR) $(HOST_DIR) \
+		$(STAMP_DIR) $(BUILD_DIR) $(TOOLCHAIN_DIR) $(BASE_DIR)/staging
 
 distclean: clean
-	rm -rf sources/*
+ifeq ($(DL_DIR),$(TOPDIR)/dl)
+	rm -rf $(DL_DIR)
+endif
+ifeq ($(O),output)
+	rm -rf $(O)
+endif
+	rm -rf $(CONFIG_DIR)/.config $(CONFIG_DIR)/.config.old $(CONFIG_DIR)/.auto.deps
 
-endif # ifeq ($(strip $(BR2_HAVE_DOT_CONFIG)),y)
+cross: $(BASE_TARGETS)
 
-.PHONY: dummy subdirs release distclean clean config oldconfig \
-	menuconfig tags check test depend defconfig
+help:
+	@echo 'Cleaning:'
+	@echo '  clean                  - delete all files created by build'
+	@echo '  distclean              - delete all non-source files (including .config)'
+	@echo
+	@echo 'Build:'
+	@echo '  all                    - make world'
+	@echo
+	@echo 'Configuration:'
+	@echo '  menuconfig             - interactive curses-based configurator'
+	@echo '  nconfig                - interactive ncurses-based configurator'
+	@echo '  xconfig                - interactive Qt-based configurator'
+	@echo '  gconfig                - interactive GTK-based configurator'
+	@echo '  oldconfig              - resolve any unresolved symbols in .config'
+	@echo '  randconfig             - New config with random answer to all options'
+	@echo '  defconfig              - New config with default answer to all options'
+	@echo '  savedefconfig          - Save current config as ./defconfig (minimal config)'
+	@echo '  allyesconfig           - New config where all options are accepted with yes'
+	@echo '  allnoconfig            - New config where all options are answered with no'
+	@echo '  randpackageconfig      - New config with random answer to package options'
+	@echo '  allyespackageconfig    - New config where pkg options are accepted with yes'
+	@echo '  allnopackageconfig     - New config where package options are answered with no'
+ifeq ($(BR2_PACKAGE_BUSYBOX),y)
+	@echo '  busybox-menuconfig     - Run BusyBox menuconfig'
+endif
+ifeq ($(BR2_LINUX_KERNEL),y)
+	@echo '  linux-menuconfig       - Run Linux kernel menuconfig'
+	@echo '  linux-savedefconfig    - Run Linux kernel savedefconfig'
+endif
+ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y)
+	@echo '  uclibc-menuconfig      - Run uClibc menuconfig'
+endif
+ifeq ($(BR2_TOOLCHAIN_CTNG),y)
+	@echo '  ctng-menuconfig        - Run crosstool-NG menuconfig'
+endif
+ifeq ($(BR2_TARGET_BAREBOX),y)
+	@echo '  barebox-menuconfig     - Run barebox menuconfig'
+	@echo '  barebox-savedefconfig  - Run barebox savedefconfig'
+endif
+	@echo
+	@echo 'Documentation:'
+	@echo '  manual                 - build manual in HTML, split HTML, PDF and txt'
+	@echo '  manual-html            - build manual in HTML'
+	@echo '  manual-split-html      - build manual in split HTML'
+	@echo '  manual-pdf             - build manual in PDF'
+	@echo '  manual-txt             - build manual in txt'
+	@echo '  manual-epub            - build manual in ePub'
+	@echo
+	@echo 'Miscellaneous:'
+	@echo '  source                 - download all sources needed for offline-build'
+	@echo '  source-check           - check all packages for valid download URLs'
+	@echo '  external-deps          - list external packages used'
+	@echo
+	@echo '  make V=0|1             - 0 => quiet build (default), 1 => verbose build'
+	@echo '  make O=dir             - Locate all output files in "dir", including .config'
+	@echo
+	@$(foreach b, $(sort $(notdir $(wildcard $(TOPDIR)/configs/*_defconfig))), \
+	  printf "  %-35s - Build for %s\\n" $(b) $(b:_defconfig=);)
+	@echo
+	@echo 'See docs/README, or generate the Buildroot manual for further details'
+	@echo
 
+release: OUT=buildroot-$(BR2_VERSION)
+
+# Create release tarballs. We need to fiddle a bit to add the generated
+# documentation to the git output
+release:
+	git archive --format=tar --prefix=$(OUT)/ master > $(OUT).tar
+	$(MAKE) O=$(OUT) manual-html manual-txt manual-pdf
+	tar rf $(OUT).tar $(OUT)
+	gzip -9 -c < $(OUT).tar > $(OUT).tar.gz
+	bzip2 -9 -c < $(OUT).tar > $(OUT).tar.bz2
+	rm -rf $(OUT) $(OUT).tar
+
+################################################################################
+# GENDOC -- generates the make targets needed to build a specific type of
+#           asciidoc documentation.
+#
+#  argument 1 is the name of the document and must be a subdirectory of docs/;
+#             the top-level asciidoc file must have the same name
+#  argument 2 is the type of document to generate (-f argument of a2x)
+#  argument 3 is the document type as used in the make target
+#  argument 4 is the output file extension for the document type
+#  argument 5 is the human text for the document type
+#  argument 6 (optional) are extra arguments for a2x
+#
+# The variable <DOCUMENT_NAME>_SOURCES defines the dependencies.
+################################################################################
+define GENDOC_INNER
+$(1): $(1)-$(3)
+.PHONY: $(1)-$(3)
+$(1)-$(3): $$(O)/docs/$(1)/$(1).$(4)
+
+$$(O)/docs/$(1)/$(1).$(4): docs/$(1)/$(1).txt $$($(call UPPERCASE,$(1))_SOURCES)
+	@echo "Generating $(5) $(1)..."
+	$(Q)mkdir -p $$(@D)
+	$(Q)a2x $(6) -f $(2) -d book -L -r $(TOPDIR)/docs/images \
+	  -D $$(@D) $$<
+endef
+
+################################################################################
+# GENDOC -- generates the make targets needed to build asciidoc documentation.
+#
+#  argument 1 is the name of the document and must be a subdirectory of docs/;
+#             the top-level asciidoc file must have the same name
+#
+# The variable <DOCUMENT_NAME>_SOURCES defines the dependencies.
+################################################################################
+define GENDOC
+$(call GENDOC_INNER,$(1),xhtml,html,html,HTML)
+$(call GENDOC_INNER,$(1),chunked,split-html,chunked,Split HTML)
+$(call GENDOC_INNER,$(1),pdf,pdf,pdf,PDF,--dblatex-opts "-P latex.output.revhistory=0")
+$(call GENDOC_INNER,$(1),text,txt,text,Text)
+$(call GENDOC_INNER,$(1),epub,epub,epub,EPUB)
+clean: clean-$(1)
+clean-$(1):
+	$(Q)$(RM) -rf $(O)/docs/$(1)
+.PHONY: $(1) clean-$(1)
+endef
+
+MANUAL_SOURCES = $(wildcard docs/manual/*.txt) $(wildcard docs/images/*)
+$(eval $(call GENDOC,manual))
+
+.PHONY: $(noconfig_targets)
 

board/armadeus/apf9328/linux-3.1.1-0001-fixes_arm_mach-types_for_apf9328.patch

@@ -0,0 +1,26 @@
+From 053ba505eb0d40287ac5750daf454af0aed2ce75 Mon Sep 17 00:00:00 2001
+From: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
+Date: Tue, 4 Oct 2011 14:19:58 +0200
+Subject: [PATCH 1/2] [ARM] mach-types: Re-add apf9328
+
+
+Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
+---
+ arch/arm/tools/mach-types |    1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
+index fff68d0..07811a7 100644
+--- a/arch/arm/tools/mach-types
++++ b/arch/arm/tools/mach-types
+@@ -188,6 +188,7 @@ omap_2430sdp		MACH_OMAP_2430SDP	OMAP_2430SDP		900
+ davinci_evm		MACH_DAVINCI_EVM	DAVINCI_EVM		901
+ palmz72			MACH_PALMZ72		PALMZ72			904
+ nxdb500			MACH_NXDB500		NXDB500			905
++apf9328			MACH_APF9328		APF9328			906
+ palmt5			MACH_PALMT5		PALMT5			917
+ palmtc			MACH_PALMTC		PALMTC			918
+ omap_apollon		MACH_OMAP_APOLLON	OMAP_APOLLON		919
+-- 
+1.7.3.4
+

board/armadeus/apf9328/linux-3.1.1-0002-add_missing_config_option_for_apf9328.patch

@@ -0,0 +1,16 @@
+APF9328 needs CONFIG_MTD_CFI_INTELEXT to boot on its NOR FLASH.
+
+Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
+
+Index: linux-3.1.1/arch/arm/mach-imx/Kconfig
+===================================================================
+--- linux-3.1.1.orig/arch/arm/mach-imx/Kconfig	2011-11-16 14:45:55.000000000 +0100
++++ linux-3.1.1/arch/arm/mach-imx/Kconfig	2011-11-16 14:47:20.000000000 +0100
+@@ -84,6 +84,7 @@
+ 	bool "APF9328"
+ 	select SOC_IMX1
+ 	select IMX_HAVE_PLATFORM_IMX_UART
++	select MTD_CFI_INTELEXT
+ 	help
+ 	  Say Yes here if you are using the Armadeus APF9328 development board
+ 

board/qemu/arm-versatile/linux-3.2.config

@@ -0,0 +1,89 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MACH_VERSATILE_AB=y
+CONFIG_PCI=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=1f03 mem=32M"
+CONFIG_VFP=y
+CONFIG_PM=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_ARM_INTEGRATOR=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMC91X=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_AMBAKMI=y
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=m
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_ACORN_8x8=y
+CONFIG_SOUND=y
+CONFIG_SND=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_ARMAACI=m
+CONFIG_MMC=y
+CONFIG_MMC_ARMMMCI=m
+CONFIG_EXT2_FS=y
+CONFIG_VFAT_FS=m
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_CRAMFS=y
+CONFIG_MINIX_FS=y
+CONFIG_ROMFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y

board/qemu/arm-versatile/readme.txt

@@ -0,0 +1,6 @@
+Run the emulation with:
+
+  qemu-system-arm -M versatilepb -kernel output/images/zImage -drive file=output/images/rootfs.ext2,if=scsi -append "root=/dev/sda console=ttyAMA0,115200" -serial stdio -net nic,model=smc91c111 -net user
+
+The login prompt will appear in the terminal that started Qemu. The
+graphical window is the framebuffer.

board/qemu/mips-malta/linux-3.2.config

@@ -0,0 +1,76 @@
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_HZ_100=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_PID_NS=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PCI=y
+CONFIG_PM=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_MISC_DEVICES is not set
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO_I8042 is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_QUOTA=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set

board/qemu/mips-malta/readme.txt

@@ -0,0 +1,7 @@
+Run the emulation with:
+
+ qemu-system-mips -M malta -kernel output/images/vmlinux -serial stdio -hda output/images/rootfs.ext2 -append "root=/dev/hda"
+
+The login prompt will appear in the terminal that started Qemu. The
+graphical window is the framebuffer. No keyboard support has been
+enabled.

board/qemu/mipsel-malta/linux-3.2.config

@@ -0,0 +1,77 @@
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_HZ_100=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_PID_NS=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PCI=y
+CONFIG_PM=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_MISC_DEVICES is not set
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO_I8042 is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_QUOTA=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set

board/qemu/mipsel-malta/readme.txt

@@ -0,0 +1,7 @@
+Run the emulation with:
+
+ qemu-system-mipsel -M malta -kernel output/images/vmlinux -serial stdio -hda output/images/rootfs.ext2 -append "root=/dev/hda"
+
+The login prompt will appear in the terminal that started Qemu. The
+graphical window is the framebuffer. No keyboard support has been
+enabled.

board/qemu/powerpc-g3beige/linux-3.2.config

@@ -0,0 +1,86 @@
+CONFIG_ALTIVEC=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+CONFIG_LBDAF=y
+CONFIG_PPC_PMAC=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
+CONFIG_PPC601_SYNC_FIX=y
+CONFIG_HIGHMEM=y
+CONFIG_NO_HZ=y
+CONFIG_BINFMT_ELF=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_PM=y
+CONFIG_SECCOMP=y
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_YENTA=y
+CONFIG_ADVANCED_OPTIONS=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_INET_LRO=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_IDE=y
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_PROC_FS=y
+CONFIG_BLK_DEV_CMD64X=y
+CONFIG_BLK_DEV_IDE_PMAC=y
+CONFIG_IEEE1394=y
+CONFIG_IEEE1394_OHCI1394=y
+CONFIG_IEEE1394_ETH1394=y
+CONFIG_IEEE1394_RAWIO=y
+CONFIG_IEEE1394_VIDEO1394=y
+CONFIG_IEEE1394_DV1394=y
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_ADB=y
+CONFIG_ADB_CUDA=y
+CONFIG_ADB_PMU=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MACE=y
+CONFIG_BMAC=y
+CONFIG_HAPPYMEAL=y
+CONFIG_SUNGEM=y
+CONFIG_CASSINI=y
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+CONFIG_NE2K_PCI=y
+CONFIG_8139CP=y
+CONFIG_8139TOO=y
+CONFIG_8139TOO_PIO=y
+CONFIG_SERIO=y
+CONFIG_SERIAL_PMACZILOG=y
+CONFIG_SERIAL_PMACZILOG_TTYS=y
+CONFIG_SERIAL_PMACZILOG_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_SSB=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_SQUASHFS=y
+CONFIG_LIBCRC32C=y
+CONFIG_BOOTX_TEXT=y
+CONFIG_CRYPTO_HW=y

board/qemu/powerpc-g3beige/readme.txt

@@ -0,0 +1,6 @@
+Run the emulation with:
+
+  qemu-system-ppc -M g3beige -kernel output/images/vmlinux -hda output/images/rootfs.ext2 -append "console=ttyS0 root=/dev/hdc" -serial stdio
+
+The login prompt will appear in the terminal that started Qemu. The
+graphical window is the framebuffer.

board/qemu/sh4-r2d/linux-3.2.config

@@ -0,0 +1,105 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7751R=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_RTS7751R2D=y
+CONFIG_RTS7751R2D_PLUS=y
+CONFIG_HEARTBEAT=y
+CONFIG_PCI=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_FW_LOADER=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_8139CP=y
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_WLAN is not set
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_SPI=y
+CONFIG_SPI_SH_SCI=y
+CONFIG_MFD_SM501=y
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FB_SH_MOBILE_LCDC=m
+CONFIG_FB_SH_MOBILE_HDMI=m
+CONFIG_FB_SM501=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=m
+CONFIG_SND_YMFPCI=m
+CONFIG_SOUND_PRIME=m
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_LIBUSUAL=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_R9701=y
+CONFIG_EXT2_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_MINIX_FS=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_DEBUG_FS=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_T10DIF=y

board/qemu/sh4-r2d/readme.txt

@@ -0,0 +1,7 @@
+Run the emulation with:
+
+  qemu-system-sh4 -M r2d -kernel output/images/zImage -drive file=output/images/rootfs.ext2,if=ide -append "root=/dev/sda console=ttySC1,115200 noiotrap" -serial null -serial stdio
+
+The login prompt will appear in the terminal that started Qemu.
+The graphical window is the framebuffer.
+

board/qemu/sparc-ss10/readme.txt

@@ -0,0 +1,7 @@
+Run the emulation with:
+
+  qemu-system-sparc -M SS-10 -kernel output/images/zImage -drive file=output/images/rootfs.ext2 -append "root=/dev/sda console=ttyS0,115200" -serial stdio
+
+The login prompt will appear in the terminal that started Qemu.
+The graphical window is the framebuffer.
+

board/qemu/x86/linux-3.2.config

@@ -0,0 +1,67 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
+# CONFIG_MTRR_SANITIZER is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_RELOCATABLE is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_BLK_DEV is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_NE2K_PCI=y
+CONFIG_8139CP=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_HDA_INTEL=y
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_X86_PLATFORM_DEVICES is not set
+# CONFIG_DMIID is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_X86_VERBOSE_BOOTUP is not set
+# CONFIG_VIRTUALIZATION is not set

board/qemu/x86/readme.txt

@@ -0,0 +1,5 @@
+Run the emulation with:
+
+  qemu-system-x86_64 -M pc -kernel output/images/bzImage -drive file=output/images/rootfs.ext2,if=ide -append root=/dev/sda
+
+The login prompt will appear in the graphical window.

board/qemu/x86_64/linux-3.2.config

@@ -0,0 +1,67 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
+# CONFIG_MTRR_SANITIZER is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_RELOCATABLE is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_BLK_DEV is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_NE2K_PCI=y
+CONFIG_8139CP=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_HDA_INTEL=y
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_X86_PLATFORM_DEVICES is not set
+# CONFIG_DMIID is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_X86_VERBOSE_BOOTUP is not set
+# CONFIG_VIRTUALIZATION is not set

board/qemu/x86_64/readme.txt

@@ -0,0 +1,5 @@
+Run the emulation with:
+
+  qemu-system-x86_64 -M pc -kernel output/images/bzImage -drive file=output/images/rootfs.ext2,if=ide -append root=/dev/sda
+
+The login prompt will appear in the graphical window.

boot/Config.in

@@ -0,0 +1,13 @@
+menu "Bootloaders"
+
+source "boot/at91bootstrap/Config.in"
+source "boot/at91dataflashboot/Config.in"
+source "boot/barebox/Config.in"
+source "boot/grub/Config.in"
+source "boot/lpc32xxcdl/Config.in"
+source "boot/syslinux/Config.in"
+source "boot/uboot/Config.in"
+source "boot/xloader/Config.in"
+
+endmenu
+

boot/at91bootstrap/Config.in

@@ -0,0 +1,50 @@
+config BR2_TARGET_AT91BOOTSTRAP
+	depends on BR2_arm926t
+	bool "AT91 Bootstrap"
+	help
+	  AT91Bootstrap is a first level bootloader for the Atmel AT91
+	  devices. It integrates algorithms for:
+	  - Device initialization such as clock configuration, PIO settings...
+	  - Peripheral drivers such as PIO, PMC or SDRAMC...
+	  - Physical media algorithm such as DataFlash, NandFlash, NOR Flash...
+
+if	BR2_TARGET_AT91BOOTSTRAP
+
+config BR2_TARGET_AT91BOOTSTRAP_CUSTOM_PATCH_DIR
+	string "custom patch dir"
+	help
+	  If your board requires custom patches, add the path to the
+	  directory containing the patches here. The patches must be
+	  named at91bootstrap-<version>-<something>.patch.
+
+	  Most users may leave this empty
+
+config BR2_TARGET_AT91BOOTSTRAP_BOARD
+	string "Bootstrap board"
+	default ""
+	help
+	  This is used to do a make <board>_config
+
+choice
+	prompt "Boot Memory"
+	default BR2_TARGET_AT91BOOTSTRAP_DATAFLASH
+	help
+	  Select Chip for which AT91 bootstrap should be built
+
+config BR2_TARGET_AT91BOOTSTRAP_DATAFLASH
+	bool "Data Flash"
+
+config BR2_TARGET_AT91BOOTSTRAP_NANDFLASH
+	bool "NAND Flash"
+
+endchoice
+
+config BR2_TARGET_AT91BOOTSTRAP_MEMORY
+	string
+	default	"dataflash"	if	BR2_TARGET_AT91BOOTSTRAP_DATAFLASH
+	default	"nandflash"	if	BR2_TARGET_AT91BOOTSTRAP_NANDFLASH
+
+endif
+
+
+

boot/at91bootstrap/at91bootstrap-1.16-eabi-fix.patch

@@ -0,0 +1,334 @@
+When using an EABI toolchain, the default compilation generates
+references to __aeabi_unwind_cpp_pr0(). This symbol is defined in
+libgcc, but we don't want to use it for a bootloader.
+
+Therefore, this patch passes some additional CFLAGS to disable the
+generation of such references by avoiding unwind tables, exceptions,
+etc.
+
+Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+---
+ board/at91cap9adk/dataflash/Makefile      |    2 +-
+ board/at91cap9adk/norflash/Makefile       |    2 +-
+ board/at91cap9stk/nandflash/Makefile      |    2 +-
+ board/at91sam9260ek/dataflash/Makefile    |    2 +-
+ board/at91sam9260ek/nandflash/Makefile    |    2 +-
+ board/at91sam9261ek/dataflash/Makefile    |    2 +-
+ board/at91sam9261ek/nandflash/Makefile    |    2 +-
+ board/at91sam9263ek/dataflash/Makefile    |    2 +-
+ board/at91sam9263ek/nandflash/Makefile    |    2 +-
+ board/at91sam9g10ek/dataflash/Makefile    |    2 +-
+ board/at91sam9g10ek/nandflash/Makefile    |    2 +-
+ board/at91sam9g20ek/dataflash/Makefile    |    2 +-
+ board/at91sam9g20ek/nandflash/Makefile    |    2 +-
+ board/at91sam9g45ekes/nandflash/Makefile  |    2 +-
+ board/at91sam9m10ekes/dataflash/Makefile  |    2 +-
+ board/at91sam9m10ekes/nandflash/Makefile  |    2 +-
+ board/at91sam9m10g45ek/dataflash/Makefile |    2 +-
+ board/at91sam9m10g45ek/nandflash/Makefile |    2 +-
+ board/at91sam9rlek/dataflash/Makefile     |    2 +-
+ board/at91sam9rlek/nandflash/Makefile     |    2 +-
+ board/at91sam9xeek/dataflash/Makefile     |    2 +-
+ board/at91sam9xeek/nandflash/Makefile     |    2 +-
+ lib/Makefile                              |    2 +-
+ 23 files changed, 23 insertions(+), 23 deletions(-)
+
+Index: Bootstrap-v1.16/board/at91cap9adk/dataflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91cap9adk/dataflash/Makefile
++++ Bootstrap-v1.16/board/at91cap9adk/dataflash/Makefile
+@@ -34,7 +34,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91cap9adk/norflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91cap9adk/norflash/Makefile
++++ Bootstrap-v1.16/board/at91cap9adk/norflash/Makefile
+@@ -34,7 +34,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91cap9stk/nandflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91cap9stk/nandflash/Makefile
++++ Bootstrap-v1.16/board/at91cap9stk/nandflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ 
+Index: Bootstrap-v1.16/board/at91sam9260ek/dataflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9260ek/dataflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9260ek/dataflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9260ek/nandflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9260ek/nandflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9260ek/nandflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9261ek/dataflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9261ek/dataflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9261ek/dataflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9261ek/nandflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9261ek/nandflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9261ek/nandflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9263ek/dataflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9263ek/dataflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9263ek/dataflash/Makefile
+@@ -34,7 +34,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9263ek/nandflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9263ek/nandflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9263ek/nandflash/Makefile
+@@ -33,7 +33,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm9 -O0 -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm9 -O0 -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9g10ek/dataflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9g10ek/dataflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9g10ek/dataflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9g10ek/nandflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9g10ek/nandflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9g10ek/nandflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9g20ek/dataflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9g20ek/dataflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9g20ek/dataflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9g20ek/nandflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9g20ek/nandflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9g20ek/nandflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9g45ekes/nandflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9g45ekes/nandflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9g45ekes/nandflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm926ej-s -c -O2 -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9m10ekes/dataflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9m10ekes/dataflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9m10ekes/dataflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm926ej-s -c -O2 -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9m10ekes/nandflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9m10ekes/nandflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9m10ekes/nandflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm926ej-s -c -O2 -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9m10g45ek/dataflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9m10g45ek/dataflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9m10g45ek/dataflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm926ej-s -c -O2 -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9m10g45ek/nandflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9m10g45ek/nandflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9m10g45ek/nandflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm926ej-s -c -O2 -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9rlek/dataflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9rlek/dataflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9rlek/dataflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9rlek/nandflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9rlek/nandflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9rlek/nandflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9xeek/dataflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9xeek/dataflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9xeek/dataflash/Makefile
+@@ -38,7 +38,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9xeek/nandflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9xeek/nandflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9xeek/nandflash/Makefile
+@@ -38,7 +38,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/lib/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/lib/Makefile
++++ Bootstrap-v1.16/lib/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.

boot/at91bootstrap/at91bootstrap-1.16-u-boot-relocation-fix.patch

@@ -0,0 +1,299 @@
+Every AT91SAM plaforms were broken between 2010.12 and 2011.03 because
+of the relocation changes.
+
+We have to get JUMP_ADDR consistant with what is used by u-boot
+(CONFIG_SYS_TEXT_BASE).
+
+I didn't know what to do with at91sam9m10g45ek as it doesn't seems to be
+converted yet. But anyway, that means that it is either not working or
+doesn't care so changing it here shouldn't harm.
+
+I also chose to "repartition" the dataflash. u-boot is now living at
+0x4000, letting 16kB for the bootstrap. We also have to increase the
+IMG_SIZE as u-boot as grown larger than the default value.
+As requested on the u-boot ML, we assume that it could be up to 512kB
+big.
+
+It means that now, you have to flash your kernel at 0x0008C000 instead
+of 0x00042000. And so you also have to load it from that adress from
+u-boot.
+
+Then, remember that you could decrease IMG_SIZE to boot faster.
+
+Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net>
+---
+ board/at91sam9260ek/dataflash/at91sam9260ek.h      |    6 +++---
+ board/at91sam9260ek/nandflash/at91sam9260ek.h      |    2 +-
+ board/at91sam9261ek/dataflash/at91sam9261ek.h      |    6 +++---
+ board/at91sam9261ek/nandflash/at91sam9261ek.h      |    2 +-
+ board/at91sam9263ek/dataflash/at91sam9263ek.h      |    6 +++---
+ board/at91sam9263ek/nandflash/at91sam9263ek.h      |    2 +-
+ board/at91sam9g10ek/dataflash/at91sam9g10ek.h      |    6 +++---
+ board/at91sam9g10ek/nandflash/at91sam9g10ek.h      |    2 +-
+ board/at91sam9g20ek/dataflash/at91sam9g20ek.h      |    6 +++---
+ board/at91sam9g20ek/nandflash/at91sam9g20ek.h      |    2 +-
+ board/at91sam9m10ekes/dataflash/at91sam9m10ekes.h  |    4 ++--
+ .../at91sam9m10g45ek/dataflash/at91sam9m10g45ek.h  |    4 ++--
+ board/at91sam9rlek/dataflash/at91sam9rlek.h        |    6 +++---
+ board/at91sam9rlek/nandflash/at91sam9rlek.h        |    2 +-
+ board/at91sam9xeek/dataflash/at91sam9xeek.h        |    6 +++---
+ board/at91sam9xeek/nandflash/at91sam9xeek.h        |    2 +-
+ 16 files changed, 32 insertions(+), 32 deletions(-)
+
+diff --git a/board/at91sam9260ek/dataflash/at91sam9260ek.h b/board/at91sam9260ek/dataflash/at91sam9260ek.h
+index 1834246..5c52bc6 100644
+--- a/board/at91sam9260ek/dataflash/at91sam9260ek.h
++++ b/board/at91sam9260ek/dataflash/at91sam9260ek.h
+@@ -73,11 +73,11 @@
+ /* ******************************************************************* */
+ #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS1_DATAFLASH	/* Boot on SPI NCS0 */
+ 
+-#define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
+-#define	IMG_SIZE		0x33900			/* Image Size in DataFlash    */
++#define IMG_ADDRESS 		0x4000			/* Image Address in DataFlash */
++#define	IMG_SIZE		0x80000			/* Image Size in DataFlash    */
+ 
+ #define MACH_TYPE       0x44B       /* AT91SAM9260-EK */
+-#define JUMP_ADDR		0x23F00000		/* Final Jump Address 	      */
++#define JUMP_ADDR		0x21F00000		/* Final Jump Address 	      */
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff --git a/board/at91sam9260ek/nandflash/at91sam9260ek.h b/board/at91sam9260ek/nandflash/at91sam9260ek.h
+index 2cac601..f8fdff2 100644
+--- a/board/at91sam9260ek/nandflash/at91sam9260ek.h
++++ b/board/at91sam9260ek/nandflash/at91sam9260ek.h
+@@ -92,7 +92,7 @@
+ #define	IMG_SIZE		0x40000		/* Image Size in NandFlash    */
+ 
+ #define MACH_TYPE       	0x44B		/* AT91SAM9260-EK */
+-#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
++#define JUMP_ADDR		0x21F00000	/* Final Jump Address 	      */
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff --git a/board/at91sam9261ek/dataflash/at91sam9261ek.h b/board/at91sam9261ek/dataflash/at91sam9261ek.h
+index 8ce30e9..675f80b 100644
+--- a/board/at91sam9261ek/dataflash/at91sam9261ek.h
++++ b/board/at91sam9261ek/dataflash/at91sam9261ek.h
+@@ -96,11 +96,11 @@
+ /* ******************************************************************* */
+ #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
+ 
+-#define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
+-#define	IMG_SIZE		0x33900			/* Image Size in DataFlash    */
++#define IMG_ADDRESS 		0x4000			/* Image Address in DataFlash */
++#define	IMG_SIZE		0x80000			/* Image Size in DataFlash    */
+ 
+ #define MACH_TYPE       0x350       /* AT91SAM9261-EK */
+-#define JUMP_ADDR		0x23F00000		/* Final Jump Address 	      */
++#define JUMP_ADDR		0x21F00000		/* Final Jump Address 	      */
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff --git a/board/at91sam9261ek/nandflash/at91sam9261ek.h b/board/at91sam9261ek/nandflash/at91sam9261ek.h
+index badc3ac..e628c97 100644
+--- a/board/at91sam9261ek/nandflash/at91sam9261ek.h
++++ b/board/at91sam9261ek/nandflash/at91sam9261ek.h
+@@ -114,7 +114,7 @@
+ #define	IMG_SIZE		0x40000		/* Image Size in NandFlash    */
+ 
+ #define MACH_TYPE       	0x350		/* AT91SAM9261-EK */
+-#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
++#define JUMP_ADDR		0x21F00000	/* Final Jump Address 	      */
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff --git a/board/at91sam9263ek/dataflash/at91sam9263ek.h b/board/at91sam9263ek/dataflash/at91sam9263ek.h
+index 5c9da4b..d07b5d1 100644
+--- a/board/at91sam9263ek/dataflash/at91sam9263ek.h
++++ b/board/at91sam9263ek/dataflash/at91sam9263ek.h
+@@ -95,11 +95,11 @@
+ /* ******************************************************************* */
+ #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
+ 
+-#define IMG_ADDRESS 			0x8400			/* Image Address in DataFlash */
+-#define	IMG_SIZE			0x33900			/* Image Size in DataFlash    */
++#define IMG_ADDRESS 			0x4000			/* Image Address in DataFlash */
++#define	IMG_SIZE			0x80000			/* Image Size in DataFlash    */
+ 
+ #define MACH_TYPE       		0x4B2       		/* AT91SAM9263-EK */
+-#define JUMP_ADDR			0x23F00000		/* Final Jump Address 	      */
++#define JUMP_ADDR			0x21F00000		/* Final Jump Address 	      */
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff --git a/board/at91sam9263ek/nandflash/at91sam9263ek.h b/board/at91sam9263ek/nandflash/at91sam9263ek.h
+index 505afc7..8ab4f46 100644
+--- a/board/at91sam9263ek/nandflash/at91sam9263ek.h
++++ b/board/at91sam9263ek/nandflash/at91sam9263ek.h
+@@ -108,7 +108,7 @@
+ #define	IMG_SIZE	0x40000		/* Image Size in NandFlash    */
+ 
+ #define MACH_TYPE       1202       	/* AT91SAM9263-EK */
+-#define JUMP_ADDR	0x23F00000	/* Final Jump Address 	      */
++#define JUMP_ADDR	0x21F00000	/* Final Jump Address 	      */
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff --git a/board/at91sam9g10ek/dataflash/at91sam9g10ek.h b/board/at91sam9g10ek/dataflash/at91sam9g10ek.h
+index b2faf44..0882644 100644
+--- a/board/at91sam9g10ek/dataflash/at91sam9g10ek.h
++++ b/board/at91sam9g10ek/dataflash/at91sam9g10ek.h
+@@ -97,11 +97,11 @@
+ /* ******************************************************************* */
+ #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
+ 
+-#define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
+-#define	IMG_SIZE		0x33900			/* Image Size in DataFlash    */
++#define IMG_ADDRESS 		0x4000			/* Image Address in DataFlash */
++#define	IMG_SIZE		0x80000			/* Image Size in DataFlash    */
+ 
+ #define MACH_TYPE       0x350       /* AT91SAM9261-EK */
+-#define JUMP_ADDR		0x23F00000		/* Final Jump Address 	      */
++#define JUMP_ADDR		0x21F00000		/* Final Jump Address 	      */
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff --git a/board/at91sam9g10ek/nandflash/at91sam9g10ek.h b/board/at91sam9g10ek/nandflash/at91sam9g10ek.h
+index 66c40a3..6c3ecda 100644
+--- a/board/at91sam9g10ek/nandflash/at91sam9g10ek.h
++++ b/board/at91sam9g10ek/nandflash/at91sam9g10ek.h
+@@ -115,7 +115,7 @@
+ #define	IMG_SIZE		0x40000		/* Image Size in NandFlash    */
+ 
+ #define MACH_TYPE       	0x350		/* AT91SAM9G10-EK */
+-#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
++#define JUMP_ADDR		0x21F00000	/* Final Jump Address 	      */
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff --git a/board/at91sam9g20ek/dataflash/at91sam9g20ek.h b/board/at91sam9g20ek/dataflash/at91sam9g20ek.h
+index eea0439..44bd578 100644
+--- a/board/at91sam9g20ek/dataflash/at91sam9g20ek.h
++++ b/board/at91sam9g20ek/dataflash/at91sam9g20ek.h
+@@ -74,11 +74,11 @@
+ /* ******************************************************************* */
+ #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS1_DATAFLASH	/* Boot on SPI NCS1 */
+ 
+-#define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
+-#define	IMG_SIZE		0x33900			/* Image Size in DataFlash */
++#define IMG_ADDRESS 		0x4000			/* Image Address in DataFlash */
++#define	IMG_SIZE		0x80000			/* Image Size in DataFlash */
+ 
+ #define MACH_TYPE		0x658			/* AT91SAM9G20-EK */
+-#define JUMP_ADDR		0x23F00000		/* Final Jump Address */
++#define JUMP_ADDR		0x21F00000		/* Final Jump Address */
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff --git a/board/at91sam9g20ek/nandflash/at91sam9g20ek.h b/board/at91sam9g20ek/nandflash/at91sam9g20ek.h
+index 31bd499..e797e4d 100644
+--- a/board/at91sam9g20ek/nandflash/at91sam9g20ek.h
++++ b/board/at91sam9g20ek/nandflash/at91sam9g20ek.h
+@@ -93,7 +93,7 @@
+ #define	IMG_SIZE		0x40000			/* Image Size in NandFlash */
+ 
+ #define MACH_TYPE		0x658			/* AT91SAM9G20-EK */
+-#define JUMP_ADDR		0x23F00000		/* Final Jump Address */
++#define JUMP_ADDR		0x21F00000		/* Final Jump Address */
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff --git a/board/at91sam9m10ekes/dataflash/at91sam9m10ekes.h b/board/at91sam9m10ekes/dataflash/at91sam9m10ekes.h
+index a60fd41..144dd6d 100644
+--- a/board/at91sam9m10ekes/dataflash/at91sam9m10ekes.h
++++ b/board/at91sam9m10ekes/dataflash/at91sam9m10ekes.h
+@@ -88,8 +88,8 @@
+ /* ******************************************************************* */
+ #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
+ 
+-#define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
+-#define	IMG_SIZE		0x33900			/* Image Size in DataFlash */
++#define IMG_ADDRESS 		0x4000			/* Image Address in DataFlash */
++#define	IMG_SIZE		0x80000			/* Image Size in DataFlash */
+ 
+ #define MACH_TYPE		0x9CD			/* AT91SAM9M10-EKES */
+ #define JUMP_ADDR		0x73F00000		/* Final Jump Address */
+diff --git a/board/at91sam9m10g45ek/dataflash/at91sam9m10g45ek.h b/board/at91sam9m10g45ek/dataflash/at91sam9m10g45ek.h
+index 5c726b5..3152b79 100644
+--- a/board/at91sam9m10g45ek/dataflash/at91sam9m10g45ek.h
++++ b/board/at91sam9m10g45ek/dataflash/at91sam9m10g45ek.h
+@@ -84,8 +84,8 @@
+ /* ******************************************************************* */
+ #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
+ 
+-#define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
+-#define	IMG_SIZE		0x33900			/* Image Size in DataFlash */
++#define IMG_ADDRESS 		0x4000			/* Image Address in DataFlash */
++#define	IMG_SIZE		0x80000			/* Image Size in DataFlash */
+ 
+ #define MACH_TYPE		0x726			/* AT91SAM9M10G45-EK */
+ #define JUMP_ADDR		0x73F00000		/* Final Jump Address */
+diff --git a/board/at91sam9rlek/dataflash/at91sam9rlek.h b/board/at91sam9rlek/dataflash/at91sam9rlek.h
+index 05c42dc..be277b6 100644
+--- a/board/at91sam9rlek/dataflash/at91sam9rlek.h
++++ b/board/at91sam9rlek/dataflash/at91sam9rlek.h
+@@ -88,11 +88,11 @@
+ /* ******************************************************************* */
+ #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
+ 
+-#define IMG_ADDRESS 	0x8400		/* Image Address in DataFlash */
+-#define	IMG_SIZE	0x33900		/* Image Size in DataFlash    */
++#define IMG_ADDRESS 	0x4000		/* Image Address in DataFlash */
++#define	IMG_SIZE	0x80000		/* Image Size in DataFlash    */
+ 
+ #define MACH_TYPE       1326       	/* AT91SAM9RL-EK */
+-#define JUMP_ADDR	0x23F00000	/* Final Jump Address 	      */
++#define JUMP_ADDR	0x21F00000	/* Final Jump Address 	      */
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff --git a/board/at91sam9rlek/nandflash/at91sam9rlek.h b/board/at91sam9rlek/nandflash/at91sam9rlek.h
+index 656b4ba..594db8f 100644
+--- a/board/at91sam9rlek/nandflash/at91sam9rlek.h
++++ b/board/at91sam9rlek/nandflash/at91sam9rlek.h
+@@ -112,7 +112,7 @@
+ #define	IMG_SIZE		0x40000		/* Image Size in NandFlash    */
+ 
+ #define MACH_TYPE       1326       		/* AT91SAM9RL-EK */
+-#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
++#define JUMP_ADDR		0x21F00000	/* Final Jump Address 	      */
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff --git a/board/at91sam9xeek/dataflash/at91sam9xeek.h b/board/at91sam9xeek/dataflash/at91sam9xeek.h
+index 27d1822..e3172da 100644
+--- a/board/at91sam9xeek/dataflash/at91sam9xeek.h
++++ b/board/at91sam9xeek/dataflash/at91sam9xeek.h
+@@ -73,11 +73,11 @@
+ /* ******************************************************************* */
+ #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS1_DATAFLASH	/* Boot on SPI NCS1 */
+ 
+-#define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
+-#define	IMG_SIZE		0x33900			/* Image Size in DataFlash    */
++#define IMG_ADDRESS 		0x4000			/* Image Address in DataFlash */
++#define	IMG_SIZE		0x80000			/* Image Size in DataFlash    */
+ 
+ #define MACH_TYPE		0x44B			/* AT91SAM9XE-EK same id as AT91SAM9260-EK*/
+-#define JUMP_ADDR		0x23F00000		/* Final Jump Address 	      */
++#define JUMP_ADDR		0x21F00000		/* Final Jump Address 	      */
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff --git a/board/at91sam9xeek/nandflash/at91sam9xeek.h b/board/at91sam9xeek/nandflash/at91sam9xeek.h
+index 5dbc63e..9fac7cb 100644
+--- a/board/at91sam9xeek/nandflash/at91sam9xeek.h
++++ b/board/at91sam9xeek/nandflash/at91sam9xeek.h
+@@ -94,7 +94,7 @@
+ #define	IMG_SIZE		0x40000		/* Image Size in NandFlash    */
+ 
+ #define MACH_TYPE		0x44B			/* AT91SAM9XE-EK same id as AT91SAM9260-EK*/
+-#define JUMP_ADDR		0x23F00000		/* Final Jump Address 	      */
++#define JUMP_ADDR		0x21F00000		/* Final Jump Address 	      */
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+-- 
+1.7.5.4
+

boot/at91bootstrap/at91bootstrap.mk

@@ -0,0 +1,50 @@
+#############################################################
+#
+# at91bootstrap
+#
+#############################################################
+AT91BOOTSTRAP_VERSION = 1.16
+AT91BOOTSTRAP_SITE = http://www.atmel.com/dyn/resources/prod_documents/
+AT91BOOTSTRAP_SOURCE = AT91Bootstrap$(AT91BOOTSTRAP_VERSION).zip
+
+AT91BOOTSTRAP_BOARD = $(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP_BOARD))
+AT91BOOTSTRAP_MEMORY = $(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP_MEMORY))
+AT91BOOTSTRAP_MAKE_SUBDIR = board/$(AT91BOOTSTRAP_BOARD)/$(AT91BOOTSTRAP_MEMORY)
+AT91BOOTSTRAP_BINARY = $(AT91BOOTSTRAP_MAKE_SUBDIR)/$(AT91BOOTSTRAP_MEMORY)_$(AT91BOOTSTRAP_BOARD).bin
+
+AT91BOOTSTRAP_INSTALL_IMAGES = YES
+AT91BOOTSTRAP_INSTALL_TARGET = NO
+
+define AT91BOOTSTRAP_EXTRACT_CMDS
+	unzip -d $(BUILD_DIR) $(DL_DIR)/$(AT91BOOTSTRAP_SOURCE)
+	mv $(BUILD_DIR)/Bootstrap-v$(AT91BOOTSTRAP_VERSION)/* $(@D)
+	rmdir $(BUILD_DIR)/Bootstrap-v$(AT91BOOTSTRAP_VERSION)
+endef
+
+ifneq ($(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP_CUSTOM_PATCH_DIR)),)
+define AT91BOOTSTRAP_APPLY_CUSTOM_PATCHES
+	support/scripts/apply-patches.sh $(@D) $(BR2_TARGET_AT91BOOTSTRAP_CUSTOM_PATCH_DIR) \
+		at91bootstrap-$(AT91BOOTSTRAP_VERSION)-\*.patch
+endef
+
+AT91BOOTSTRAP_POST_PATCH_HOOKS += AT91BOOTSTRAP_APPLY_CUSTOM_PATCHES
+endif
+
+define AT91BOOTSTRAP_BUILD_CMDS
+	$(MAKE) CROSS_COMPILE=$(TARGET_CROSS) -C $(@D)/$(AT91BOOTSTRAP_MAKE_SUBDIR)
+endef
+
+define AT91BOOTSTRAP_INSTALL_IMAGES_CMDS
+	cp $(@D)/$(AT91BOOTSTRAP_BINARY) $(BINARIES_DIR)
+endef
+
+$(eval $(call GENTARGETS))
+
+ifeq ($(BR2_TARGET_AT91BOOTSTRAP),y)
+# we NEED a board name unless we're at make source
+ifeq ($(filter source,$(MAKECMDGOALS)),)
+ifeq ($(AT91BOOTSTRAP_BOARD),)
+$(error No AT91Bootstrap board name set. Check your BR2_TARGET_AT91BOOTSTRAP_BOARD setting)
+endif
+endif
+endif

boot/at91dataflashboot/Config.in

@@ -0,0 +1,3 @@
+config BR2_TARGET_AT91DATAFLASHBOOT
+       depends on BR2_arm926t
+       bool "AT91 DataFlashBoot"

boot/at91dataflashboot/at91dataflashboot-1.05-do-not-install.patch

@@ -0,0 +1,22 @@
+Disable the automatic installation of at91dataflashboot since it tries
+to install things to /tftpboot, which is not possible when not
+building as root.
+
+Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+---
+ Makefile |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+Index: at91dataflashboot-1.05/Makefile
+===================================================================
+--- at91dataflashboot-1.05.orig/Makefile
++++ at91dataflashboot-1.05/Makefile
+@@ -40,7 +40,7 @@
+ 
+ I=config.h com.h dataflash.h embedded_services.h main.h stdio.h include/AT91RM9200.h include/lib_AT91RM9200.h 
+ 
+-all: 	clean $(BINNAME) $(LSSNAME) install
++all: 	clean $(BINNAME) $(LSSNAME)
+ 	$(SIZE) $(OUTNAME)
+ 
+ # C objects here

boot/at91dataflashboot/at91dataflashboot-1.05-eabi-fixes.patch

@@ -0,0 +1,43 @@
+Get at91dataflashboot to build with EABI toolchains, by providing the
+__aeabi_uidiv and __aeabi_uidivmod symbols. The code is based on
+U-Boot's code.
+
+Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+---
+ _udivsi3.S |   14 ++++++++++++++
+ 1 file changed, 14 insertions(+)
+
+Index: DataflashBoot-1.05/_udivsi3.S
+===================================================================
+--- DataflashBoot-1.05.orig/_udivsi3.S
++++ DataflashBoot-1.05/_udivsi3.S
+@@ -12,8 +12,11 @@
+ 	.text
+ 	.globl	 __udivsi3
+ 	.type  __udivsi3       ,function
++        .globl  __aeabi_uidiv
++        .type   __aeabi_uidiv ,function
+ 	.align	0
+  __udivsi3      :
++ __aeabi_uidiv:
+ 	cmp	divisor, #0
+ 	beq	Ldiv0
+ 	mov	curbit, #1
+@@ -68,6 +71,17 @@
+ 	mov	r0, #0			@ about as wrong as it could be
+ 	ldmia	sp!, {pc}
+ 	.size  __udivsi3       , . -  __udivsi3
++
++.globl __aeabi_uidivmod
++__aeabi_uidivmod:
++
++        stmfd   sp!, {r0, r1, ip, lr}
++        bl      __aeabi_uidiv
++        ldmfd   sp!, {r1, r2, ip, lr}
++        mul     r3, r0, r2
++        sub     r1, r1, r3
++        mov     pc, lr
++
+ /* # 235 "libgcc1.S" */
+ /* # 320 "libgcc1.S" */
+ /* # 421 "libgcc1.S" */

boot/at91dataflashboot/at91dataflashboot.mk

@@ -0,0 +1,22 @@
+#############################################################
+#
+# DataFlashBoot
+#
+#############################################################
+
+AT91DATAFLASHBOOT_VERSION = 1.05
+AT91DATAFLASHBOOT_SOURCE = DataflashBoot-$(AT91DATAFLASHBOOT_VERSION).tar.bz2
+AT91DATAFLASHBOOT_SITE = ftp://www.at91.com/pub/buildroot/
+
+AT91DATAFLASHBOOT_INSTALL_TARGET = NO
+AT91DATAFLASHBOOT_INSTALL_IMAGES = YES
+
+define AT91DATAFLASHBOOT_BUILD_CMDS
+	make -C $(@D) CROSS_COMPILE=$(TARGET_CROSS)
+endef
+
+define AT91DATAFLASHBOOT_INSTALL_IMAGES_CMDS
+	cp $(@D)/DataflashBoot-$(AT91DATAFLASHBOOT_VERSION).bin $(BINARIES_DIR)
+endef
+
+$(eval $(call GENTARGETS))

boot/barebox/Config.in

@@ -0,0 +1,78 @@
+config BR2_TARGET_BAREBOX
+	bool "Barebox"
+	help
+	  The Barebox bootloader, formerly known as U-Boot v2.
+
+	  http://www.barebox.org
+
+if BR2_TARGET_BAREBOX
+choice
+	prompt "version"
+	default BR2_TARGET_BAREBOX_2012_02
+	help
+	  Select the specific Barebox version you want to use
+
+config BR2_TARGET_BAREBOX_2011_12
+	depends on BR2_DEPRECATED
+	bool "2011.12"
+
+config BR2_TARGET_BAREBOX_2012_01
+	bool "2012.01"
+
+config BR2_TARGET_BAREBOX_2012_02
+	bool "2012.02"
+
+config BR2_TARGET_BAREBOX_CUSTOM_TARBALL
+	bool "Custom tarball"
+
+config BR2_TARGET_BAREBOX_CUSTOM_GIT
+	bool "Custom Git repository"
+
+endchoice
+
+if BR2_TARGET_BAREBOX_CUSTOM_TARBALL
+
+config BR2_TARGET_BAREBOX_CUSTOM_TARBALL_LOCATION
+	string "URL of custom Barebox tarball"
+
+endif
+
+config BR2_TARGET_BAREBOX_VERSION
+	string
+	default "2011.12.0"	if BR2_TARGET_BAREBOX_2011_12
+	default "2012.01.0"	if BR2_TARGET_BAREBOX_2012_01
+	default "2012.02.0"	if BR2_TARGET_BAREBOX_2012_02
+	default "custom"	if BR2_TARGET_BAREBOX_CUSTOM_TARBALL
+	default $BR2_TARGET_BAREBOX_CUSTOM_GIT_VERSION if BR2_TARGET_BAREBOX_CUSTOM_GIT
+
+config BR2_TARGET_BAREBOX_CUSTOM_PATCH_DIR
+	string "custom patch dir"
+	help
+	  If your board requires custom patches, add the path to the
+	  directory containing the patches here. The patches must be
+	  named barebox-<version>-<something>.patch.
+
+	  Most users may leave this empty
+
+if BR2_TARGET_BAREBOX_CUSTOM_GIT
+
+config BR2_TARGET_BAREBOX_CUSTOM_GIT_REPO_URL
+	string "URL of custom Git repository"
+
+config BR2_TARGET_BAREBOX_CUSTOM_GIT_VERSION
+	string "Custom Git version"
+
+endif
+
+config BR2_TARGET_BAREBOX_BOARD_DEFCONFIG
+	string "board defconfig"
+	help
+	  Name of the board for which Barebox should be built, without
+	  the _defconfig suffix.
+
+config BR2_TARGET_BAREBOX_BAREBOXENV
+	bool "bareboxenv tool in target"
+	help
+	  Install bareboxenv tool in target.
+
+endif

boot/barebox/barebox.mk

@@ -0,0 +1,94 @@
+#############################################################
+#
+# Barebox
+#
+#############################################################
+
+BAREBOX_VERSION    = $(call qstrip,$(BR2_TARGET_BAREBOX_VERSION))
+
+ifeq ($(BAREBOX_VERSION),custom)
+# Handle custom Barebox tarballs as specified by the configuration
+BAREBOX_TARBALL = $(call qstrip,$(BR2_TARGET_BAREBOX_CUSTOM_TARBALL_LOCATION))
+BAREBOX_SITE    = $(dir $(BAREBOX_TARBALL))
+BAREBOX_SOURCE  = $(notdir $(BAREBOX_TARBALL))
+else ifeq ($(BR2_TARGET_BAREBOX_CUSTOM_GIT),y)
+BAREBOX_SITE        = $(call qstrip,$(BR2_TARGET_BAREBOX_CUSTOM_GIT_REPO_URL))
+BAREBOX_SITE_METHOD = git
+else
+# Handle stable official Barebox versions
+BAREBOX_SOURCE = barebox-$(BAREBOX_VERSION).tar.bz2
+BAREBOX_SITE = http://www.barebox.org/download/
+endif
+
+ifneq ($(call qstrip,$(BR2_TARGET_BAREBOX_CUSTOM_PATCH_DIR)),)
+define BAREBOX_APPLY_CUSTOM_PATCHES
+	support/scripts/apply-patches.sh $(@D) $(BR2_TARGET_BAREBOX_CUSTOM_PATCH_DIR) \
+		barebox-$(BAREBOX_VERSION)-\*.patch
+endef
+
+BAREBOX_POST_PATCH_HOOKS += BAREBOX_APPLY_CUSTOM_PATCHES
+endif
+
+BAREBOX_INSTALL_IMAGES = YES
+ifneq ($(BR2_TARGET_BAREBOX_BAREBOXENV),y)
+BAREBOX_INSTALL_TARGET = NO
+endif
+
+BAREBOX_BOARD_DEFCONFIG = $(call qstrip,$(BR2_TARGET_BAREBOX_BOARD_DEFCONFIG))
+
+ifeq ($(KERNEL_ARCH),i386)
+BAREBOX_ARCH=x86
+else ifeq ($(KERNEL_ARCH),powerpc)
+BAREBOX_ARCH=ppc
+else
+BAREBOX_ARCH=$(KERNEL_ARCH)
+endif
+
+BAREBOX_MAKE_FLAGS = ARCH=$(BAREBOX_ARCH) CROSS_COMPILE="$(CCACHE) $(TARGET_CROSS)"
+
+define BAREBOX_CONFIGURE_CMDS
+	$(MAKE) $(BAREBOX_MAKE_FLAGS) -C $(@D) $(BAREBOX_BOARD_DEFCONFIG)_defconfig
+endef
+
+ifeq ($(BR2_TARGET_BAREBOX_BAREBOXENV),y)
+define BAREBOX_BUILD_BAREBOXENV_CMDS
+	$(TARGET_CC) $(TARGET_CFLAGS) $(TARGET_LDFLAGS) -o $(@D)/bareboxenv \
+		$(@D)/scripts/bareboxenv.c
+endef
+endif
+
+define BAREBOX_BUILD_CMDS
+	$(BAREBOX_BUILD_BAREBOXENV_CMDS)
+	$(MAKE) $(BAREBOX_MAKE_FLAGS) -C $(@D)
+endef
+
+define BAREBOX_INSTALL_IMAGES_CMDS
+	cp $(@D)/barebox.bin $(BINARIES_DIR)
+endef
+
+ifeq ($(BR2_TARGET_BAREBOX_BAREBOXENV),y)
+define BAREBOX_INSTALL_TARGET_CMDS
+	cp $(@D)/bareboxenv $(TARGET_DIR)/usr/bin
+endef
+endif
+
+$(eval $(call GENTARGETS))
+
+ifeq ($(BR2_TARGET_BAREBOX),y)
+# we NEED a board defconfig file unless we're at make source
+ifeq ($(filter source,$(MAKECMDGOALS)),)
+ifeq ($(BAREBOX_BOARD_DEFCONFIG),)
+$(error No Barebox defconfig file. Check your BR2_TARGET_BAREBOX_BOARD_DEFCONFIG setting)
+endif
+endif
+
+barebox-menuconfig barebox-xconfig barebox-gconfig barebox-nconfig: barebox-configure
+	$(MAKE) $(BAREBOX_MAKE_FLAGS) -C $(BAREBOX_DIR) \
+		$(subst barebox-,,$@)
+	rm -f $(BAREBOX_DIR)/.stamp_{built,target_installed,images_installed}
+
+barebox-savedefconfig: barebox-configure
+	$(MAKE) $(BAREBOX_MAKE_FLAGS) -C $(BAREBOX_DIR) \
+		$(subst barebox-,,$@)
+
+endif

boot/common.mk

@@ -0,0 +1 @@
+include boot/*/*.mk

boot/grub/Config.in

@@ -0,0 +1,146 @@
+config BR2_TARGET_GRUB
+	bool "grub"
+	depends on BR2_i386 || BR2_x86_64
+	help
+	  The GRand Unified Bootloader for x86 systems.
+
+config BR2_TARGET_GRUB_SPLASH
+	bool "Splashimage support"
+	depends on BR2_TARGET_GRUB
+	help
+	  Add support for splashimage.
+
+	  A splashimage is a 14-color indexed .xpm picture which
+	  is displayed as background for the grub menu.
+
+config BR2_TARGET_GRUB_DISKLESS
+	bool "diskless support"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable diskless support
+
+config BR2_TARGET_GRUB_3c595
+	bool "3Com595 driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable 3Com595 driver
+
+config BR2_TARGET_GRUB_3c90x
+	bool "3Com90x driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable 3Com90x driver
+
+config BR2_TARGET_GRUB_davicom
+	bool "Davicom driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable Davicom driver
+
+config BR2_TARGET_GRUB_e1000
+	bool "Etherexpress Pro/1000 driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable Etherexpress Pro/1000 driver
+
+config BR2_TARGET_GRUB_eepro100
+	bool "Etherexpress Pro/100 driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable Etherexpress Pro/100 driver
+
+config BR2_TARGET_GRUB_epic100
+	bool "SMC 83c170 EPIC/100 driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable SMC 83c170 EPIC/100 driver
+
+config BR2_TARGET_GRUB_forcedeth
+	bool "Nvidia Geforce driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable Nvidia Geforce driver
+
+config BR2_TARGET_GRUB_natsemi
+	bool "NatSemi DP8381x driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable NatSemi DP8381x driver
+
+config BR2_TARGET_GRUB_ns83820
+	bool "NS83820 driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable NS83820 driver
+
+config BR2_TARGET_GRUB_ns8390
+	bool "NE2000 PCI driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable NE2000 PCI driver
+
+config BR2_TARGET_GRUB_pcnet32
+	bool "AMD Lance/PCI PCNet/32 driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable AMD Lance/PCI PCNet/32 driver
+
+config BR2_TARGET_GRUB_pnic
+	bool "Bochs Pseudo Nic driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable Bochs Pseudo Nic driver
+
+config BR2_TARGET_GRUB_rtl8139
+	bool "Realtek 8139 driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable Realtek 8139 driver
+
+config BR2_TARGET_GRUB_r8169
+	bool "Realtek 8169 driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable Realtek 8169 driver
+
+config BR2_TARGET_GRUB_sis900
+	bool "SIS 900 and SIS 7016 driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable SIS 900 and SIS 7016 driver
+
+config BR2_TARGET_GRUB_tg3
+	bool "Broadcom Tigon3 driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable Broadcom Tigon3 driver
+
+config BR2_TARGET_GRUB_tulip
+	bool "Tulip driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable Tulip driver
+
+config BR2_TARGET_GRUB_tlan
+	bool "TI ThunderLAN driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable TI ThunderLAN driver
+
+config BR2_TARGET_GRUB_undi
+	bool "PXE UNDI driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable PXE UNDI driver
+
+config BR2_TARGET_GRUB_via_rhine
+	bool "Rhine-I/II driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable Rhine-I/II driver
+
+config BR2_TARGET_GRUB_w89c840
+	bool "Winbond W89c840 driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable Winbond W89c840 driver

boot/grub/grub.mk

@@ -0,0 +1,85 @@
+#############################################################
+#
+# grub
+#
+#############################################################
+
+GRUB_VERSION = 0.97
+GRUB_SOURCE = grub_$(GRUB_VERSION).orig.tar.gz
+GRUB_PATCH  = grub_$(GRUB_VERSION)-35.diff.gz
+GRUB_SITE   = http://snapshot.debian.org/archive/debian/20080329T000000Z/pool/main/g/grub/
+
+GRUB_CFLAGS=-DSUPPORT_LOOPDEV
+ifeq ($(BR2_LARGEFILE),)
+GRUB_CFLAGS+=-U_FILE_OFFSET_BITS
+endif
+
+GRUB_CONFIG-$(BR2_TARGET_GRUB_SPLASH) += --enable-graphics
+GRUB_CONFIG-$(BR2_TARGET_GRUB_DISKLESS) += --enable-diskless
+GRUB_CONFIG-$(BR2_TARGET_GRUB_3c595) += --enable-3c595
+GRUB_CONFIG-$(BR2_TARGET_GRUB_3c90x) += --enable-3c90x
+GRUB_CONFIG-$(BR2_TARGET_GRUB_davicom) += --enable-davicom
+GRUB_CONFIG-$(BR2_TARGET_GRUB_e1000) += --enable-e1000
+GRUB_CONFIG-$(BR2_TARGET_GRUB_eepro100) += --enable-eepro100
+GRUB_CONFIG-$(BR2_TARGET_GRUB_epic100) += --enable-epic100
+GRUB_CONFIG-$(BR2_TARGET_GRUB_forcedeth) += --enable-forcedeth
+GRUB_CONFIG-$(BR2_TARGET_GRUB_natsemi) += --enable-natsemi
+GRUB_CONFIG-$(BR2_TARGET_GRUB_ns83820) += --enable-ns83820
+GRUB_CONFIG-$(BR2_TARGET_GRUB_ns8390) += --enable-ns8390
+GRUB_CONFIG-$(BR2_TARGET_GRUB_pcnet32) += --enable-pcnet32
+GRUB_CONFIG-$(BR2_TARGET_GRUB_pnic) += --enable-pnic
+GRUB_CONFIG-$(BR2_TARGET_GRUB_rtl8139) += --enable-rtl8139
+GRUB_CONFIG-$(BR2_TARGET_GRUB_r8169) += --enable-r8169
+GRUB_CONFIG-$(BR2_TARGET_GRUB_sis900) += --enable-sis900
+GRUB_CONFIG-$(BR2_TARGET_GRUB_tg3) += --enable-tg3
+GRUB_CONFIG-$(BR2_TARGET_GRUB_tulip) += --enable-tulip
+GRUB_CONFIG-$(BR2_TARGET_GRUB_tlan) += --enable-tlan
+GRUB_CONFIG-$(BR2_TARGET_GRUB_undi) += --enable-undi
+GRUB_CONFIG-$(BR2_TARGET_GRUB_via_rhine) += --enable-via-rhine
+GRUB_CONFIG-$(BR2_TARGET_GRUB_w89c840) += --enable-w89c840
+
+define GRUB_DEBIAN_PATCHES
+	# Apply the patches from the Debian patch
+	(cd $(@D) ; for f in `cat debian/patches/00list | grep -v ^#` ; do \
+		cat debian/patches/$$f | patch -g0 -p1 ; \
+	done)
+endef
+
+GRUB_POST_PATCH_HOOKS += GRUB_DEBIAN_PATCHES
+
+GRUB_CONF_ENV = \
+	CFLAGS="$(TARGET_CFLAGS) $(GRUB_CFLAGS)"
+
+GRUB_CONF_OPT = \
+	--disable-auto-linux-mem-opt \
+	$(GRUB_CONFIG-y)
+
+define GRUB_INSTALL_STAGING_CMDS
+	install -m 0755 -D $(@D)/grub/grub $(STAGING_DIR)/sbin/grub
+endef
+
+ifeq ($(BR2_TARGET_GRUB_SPLASH),y)
+define GRUB_INSTALL_SPLASH
+	cp boot/grub/splash.xpm.gz $(TARGET_DIR)/boot/grub/
+endef
+endif
+
+define GRUB_INSTALL_TARGET_CMDS
+	install -m 0755 -D $(@D)/grub/grub $(TARGET_DIR)/sbin/grub
+	mkdir -p $(TARGET_DIR)/boot/grub
+	cp $(@D)/stage1/stage1 $(TARGET_DIR)/boot/grub
+	cp $(@D)/stage2/*1_5   $(TARGET_DIR)/boot/grub
+	cp $(@D)/stage2/stage2 $(TARGET_DIR)/boot/grub
+	$(GRUB_INSTALL_SPLASH)
+endef
+
+define GRUB_UNINSTALL_STAGING_CMDS
+	rm -f $(STAGING_DIR)/sbin/grub
+endef
+
+define GRUB_UNINSTALL_TARGET_CMDS
+	rm -f $(TARGET_DIR)/sbin/grub
+	rm -rf $(TARGET_DIR)/boot/grub
+endef
+
+$(eval $(call AUTOTARGETS))

boot/grub/menu.lst

@@ -0,0 +1,7 @@
+default=0
+timeout=5
+splashimage=(hd0,0)/boot/grub/splash.xpm.gz
+hiddenmenu
+title Buildroot
+	root (hd0,0)
+	kernel /boot/bzImage rw root=/dev/hda1 vga=791 

boot/lpc32xxcdl/Config.in

@@ -0,0 +1,10 @@
+config BR2_TARGET_LPC32XXCDL
+	depends on BR2_arm926t
+	bool "LPC32XX CDL (kickstart and S1L)"
+
+if BR2_TARGET_LPC32XXCDL
+
+config BR2_TARGET_LPC32XXCDL_BOARDNAME
+	string "LPC32xx board name"
+
+endif #BR2_TARGET_LPC32XXCDL

boot/lpc32xxcdl/lpc32xxcdl-2.11-compiler_name.patch

@@ -0,0 +1,52 @@
+Use CROSS_COMPILE as compiler name and stop using libc
+
+Signed-off-by: Alexandre Belloni <abelloni@adeneo-embedded.com>
+---
+ makerule/lpc32xx/make.lpc32xx.gnu |   22 +++++++++++-----------
+ 1 files changed, 11 insertions(+), 11 deletions(-)
+
+diff --git a/makerule/lpc32xx/make.lpc32xx.gnu b/makerule/lpc32xx/make.lpc32xx.gnu
+index 1014c28..3277d99 100644
+--- a/makerule/lpc32xx/make.lpc32xx.gnu
++++ b/makerule/lpc32xx/make.lpc32xx.gnu
+@@ -27,19 +27,19 @@ CFLAGS   += -mno-sched-prolog -fno-hosted -mno-thumb-interwork -ffunction-sectio
+ CFLAGS   += -I$(CSP_INC_DIR) -I$(BSP_INC_DIR) -I$(GEN_INC_DIR)
+ AFLAGS   = -mcpu=arm926ej-s
+ AFLAGS   += -I$(CSP_INC_DIR) -I$(BSP_INC_DIR) -I$(GEN_INC_DIR)
+-CC       = arm-none-eabi-gcc
+-AS       = arm-none-eabi-as
+-AR       = arm-none-eabi-ar -r
+-LD       = arm-none-eabi-gcc
+-NM       = arm-none-eabi-nm
+-OBJDUMP  = arm-none-eabi-objdump
+-OBJCOPY  = arm-none-eabi-objcopy
+-READELF  = arm-none-eabi-readelf
++CC       = $(CROSS_COMPILE)gcc
++AS       = $(CROSS_COMPILE)as
++AR       = $(CROSS_COMPILE)ar -r
++LD       = $(CROSS_COMPILE)gcc
++NM       = $(CROSS_COMPILE)nm
++OBJDUMP  = $(CROSS_COMPILE)objdump
++OBJCOPY  = $(CROSS_COMPILE)objcopy
++READELF  = $(CROSS_COMPILE)readelf
+ LDFLAGS  += -Wl,--gc-sections
+ 
+ LK       =  -static
+ LK       += -Wl,--start-group $(TARGET_CSP_LIB) $(TARGET_BSP_LIB) $(TARGET_GEN_LIB)
+-LK       +=  -lgcc -lc -lg -lm -lstdc++ -lsupc++ 
++LK       +=  -nostdlib -lgcc #-lc -lg -lm -lstdc++ -lsupc++ 
+ LK       += -Wl,--end-group
+ MAP      = -Xlinker -Map -Xlinker
+ LDESC    = -Xlinker -T  
+@@ -47,6 +47,6 @@ ENTRY    = -e
+ BIN      = -bin
+ EXT      = .elf
+ LEXT     = 
+-ELFTOREC =arm-none-eabi-objcopy -O srec --strip-all --verbose
+-ELFTOBIN =arm-none-eabi-objcopy -I elf32-littlearm -O binary --strip-all --verbose
++ELFTOREC = $(OBJCOPY) -O srec --strip-all --verbose
++ELFTOBIN = $(OBJCOPY) -I elf32-littlearm -O binary --strip-all --verbose
+ REC      =.srec
+-- 
+1.7.7.3
+

boot/lpc32xxcdl/lpc32xxcdl-2.11-delete_redundant_files.patch

@@ -0,0 +1,969 @@
+Remove duplicated files to stop the linker from complaining about duplicate
+symbols
+
+Signed-off-by: Alexandre Belloni <abelloni@adeneo-embedded.com>
+---
+--- a/csps/lpc32xx/bsps/fdi3250/startup/examples/s1l/sysapi_timer.c	2011-10-05 19:10:37.000000000 +0200
++++ /dev/null	2012-01-01 16:39:47.918907000 +0100
+@@ -1,212 +0,0 @@
+-/***********************************************************************
+- * $Id:: sysapi_timer.c 3394 2010-05-06 17:56:27Z usb10132             $
+- *
+- * Project: Time support functions
+- *
+- * Description:
+- *     Implements the following functions required for the S1L API
+- *         time_init
+- *         time_reset
+- *         time_start
+- *         time_stop
+- *         time_get
+- *         time_get_rate
+- *
+- ***********************************************************************
+- * Software that is described herein is for illustrative purposes only  
+- * which provides customers with programming information regarding the  
+- * products. This software is supplied "AS IS" without any warranties.  
+- * NXP Semiconductors assumes no responsibility or liability for the 
+- * use of the software, conveys no license or title under any patent, 
+- * copyright, or mask work right to the product. NXP Semiconductors 
+- * reserves the right to make changes in the software without 
+- * notification. NXP Semiconductors also make no representation or 
+- * warranty that such application will be suitable for the specified 
+- * use without further testing or modification. 
+- **********************************************************************/
+-
+-#include "s1l_sys_inf.h"
+-#include "lpc32xx_intc_driver.h"
+-#include "lpc32xx_timer_driver.h"
+-
+-static UNS_64 base_rate;
+-static INT_32 tdev = 0;
+-
+-/***********************************************************************
+- *
+- * Function: time_init
+- *
+- * Purpose: Initializes time system
+- *
+- * Processing: Initializes the system timer.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: 0 if the init failed, otherwise non-zero
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-INT_32 time_init(void)
+-{
+-	TMR_PSCALE_SETUP_T pscale;
+-
+-	/* Open timer driver */
+-	if (tdev == 0)
+-	{
+-		tdev = timer_open((void *) TIMER_CNTR0, 0);
+-		if (tdev != 0)
+-		{
+-			/* Use a prescale count to 100000 */
+-			pscale.ps_tick_val = 100000;
+-			pscale.ps_us_val = 0; /* Not needed when ps_tick_val != 0 */
+-			timer_ioctl(tdev, TMR_SETUP_PSCALE, (INT_32) &pscale);
+-
+-			/* Get timer clock rate */
+-			base_rate = (UNS_64) timer_ioctl(tdev, TMR_GET_STATUS,
+-				TMR_GET_CLOCK);
+-		}
+-	}
+-
+-	return tdev;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: time_reset
+- *
+- * Purpose: Resets system timer
+- *
+- * Processing:
+- *     See function.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: Nothing
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-void time_reset(void)
+-{
+-	if (tdev != 0)
+-	{
+-		timer_ioctl(tdev, TMR_RESET, 1);
+-	}
+-}
+-
+-/***********************************************************************
+- *
+- * Function: time_start
+- *
+- * Purpose: Starts system timer
+- *
+- * Processing:
+- *     See function.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: Nothing
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-void time_start(void)
+-{
+-	if (tdev != 0)
+-	{
+-		timer_ioctl(tdev, TMR_ENABLE, 1);
+-	}
+-}
+-
+-/***********************************************************************
+- *
+- * Function: time_stop
+- *
+- * Purpose: Stops system timer
+- *
+- * Processing:
+- *     See function.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: Nothing
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-void time_stop(void)
+-{
+-	if (tdev != 0)
+-	{
+-		timer_ioctl(tdev, TMR_ENABLE, 0);
+-	}
+-}
+-
+-/***********************************************************************
+- *
+- * Function: time_get
+- *
+- * Purpose: Returns current system time value
+- *
+- * Processing:
+- *     See function.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: The number of ticks of the timer counter
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-UNS_64 time_get(void)
+-{
+-	TMR_COUNTS_T tcounts;
+-	UNS_64 ticks = 0;
+-
+-	if (tdev != 0)
+-	{
+-		timer_ioctl(tdev, TMR_GET_COUNTS, (INT_32) &tcounts);
+-
+-		/* Compute number of timer ticks */
+-		ticks = (UNS_64) tcounts.count_val * 100000;
+-		ticks = ticks + (UNS_64) tcounts.ps_count_val;
+-	}
+-
+-	return ticks;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: time_get_rate
+- *
+- * Purpose:
+- *     Returns base tick rate (ticks per second) of the time counter
+- *
+- * Processing:
+- *     See function.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: The timer tick rate (in ticks per second)
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-UNS_64 time_get_rate(void)
+-{
+-	return base_rate;
+-}
+-
+--- a/csps/lpc32xx/bsps/fdi3250/startup/examples/s1l/sys_mmu_cmd_group.c	2011-10-05 19:10:37.000000000 +0200
++++ /dev/null	2012-01-01 16:39:47.918907000 +0100
+@@ -1,746 +0,0 @@
+-/***********************************************************************
+- * $Id:: sys_mmu_cmd_group.c 3430 2010-05-07 17:39:08Z usb10132        $
+- *
+- * Project: Command processor for peek, poke, dump, and fill
+- *
+- * Description:
+- *     Processes commands from the command prompt
+- *
+- ***********************************************************************
+- * Software that is described herein is for illustrative purposes only  
+- * which provides customers with programming information regarding the  
+- * products. This software is supplied "AS IS" without any warranties.  
+- * NXP Semiconductors assumes no responsibility or liability for the 
+- * use of the software, conveys no license or title under any patent, 
+- * copyright, or mask work right to the product. NXP Semiconductors 
+- * reserves the right to make changes in the software without 
+- * notification. NXP Semiconductors also make no representation or 
+- * warranty that such application will be suitable for the specified 
+- * use without further testing or modification. 
+- **********************************************************************/
+-
+-#include "lpc_arm922t_cp15_driver.h"
+-#include "lpc_string.h"
+-#include "startup.h"
+-#include "s1l_cmds.h"
+-#include "s1l_sys_inf.h"
+-
+-/* dcache command */
+-BOOL_32 cmd_dcache(void);
+-static UNS_32 cmd_dcache_plist[] =
+-{
+-	(PARSE_TYPE_STR), /* The "dcache" command */
+-	(PARSE_TYPE_DEC | PARSE_TYPE_END)
+-};
+-static CMD_ROUTE_T core_dcache_cmd =
+-{
+-	(UNS_8 *) "dcache",
+-	cmd_dcache,
+-	(UNS_8 *) "Enables, disables, or flushes data cache",
+-	(UNS_8 *) "dcache [0(disable), 1(enable), 2(flush)]",
+-	cmd_dcache_plist,
+-	NULL
+-};
+-
+-/* icache command */
+-BOOL_32 cmd_icache(void);
+-static UNS_32 cmd_icache_plist[] =
+-{
+-	(PARSE_TYPE_STR), /* The "icache" command */
+-	(PARSE_TYPE_DEC | PARSE_TYPE_END)
+-};
+-static CMD_ROUTE_T core_icache_cmd =
+-{
+-	(UNS_8 *) "icache",
+-	cmd_icache,
+-	(UNS_8 *) "Enables or disables instruction cache",
+-	(UNS_8 *) "icache [0(disable), 1(enable)]",
+-	cmd_icache_plist,
+-	NULL
+-};
+-
+-/* inval command */
+-BOOL_32 cmd_inval(void);
+-static UNS_32 cmd_inval_plist[] =
+-{
+-	(PARSE_TYPE_STR | PARSE_TYPE_END) /* The "inval" command */
+-};
+-static CMD_ROUTE_T core_inval_cmd =
+-{
+-	(UNS_8 *) "inval",
+-	cmd_inval,
+-	(UNS_8 *) "Flushes data cache and invalidates instruction cache",
+-	(UNS_8 *) "inval",
+-	cmd_inval_plist,
+-	NULL
+-};
+-
+-/* mmuenab command */
+-BOOL_32 cmd_mmuenab(void);
+-static UNS_32 cmd_mmuenab_plist[] =
+-{
+-	(PARSE_TYPE_STR), /* The "mmuenab" command */
+-	(PARSE_TYPE_DEC | PARSE_TYPE_END)
+-};
+-static CMD_ROUTE_T core_mmuenab_cmd =
+-{
+-	(UNS_8 *) "mmuenab",
+-	cmd_mmuenab,
+-	(UNS_8 *) "Enables or disables the MMU",
+-	(UNS_8 *) "mmuenab [0(disable), 1(enable)]",
+-	cmd_mmuenab_plist,
+-	NULL
+-};
+-
+-/* map command */
+-BOOL_32 cmd_map(void);
+-static UNS_32 cmd_map_plist[] =
+-{
+-	(PARSE_TYPE_STR), /* The "map" command */
+-	(PARSE_TYPE_HEX),
+-	(PARSE_TYPE_HEX),
+-	(PARSE_TYPE_DEC),
+-	(PARSE_TYPE_DEC | PARSE_TYPE_END),
+-};
+-static CMD_ROUTE_T core_map_cmd =
+-{
+-	(UNS_8 *) "map",
+-	cmd_map,
+-	(UNS_8 *) "Maps a range of physical address sections to virtual addresses",
+-	(UNS_8 *) "map [virt hex addr][phy hex addr][sections][0(uncached), 1(cached), 2(unmap)]",
+-	cmd_map_plist,
+-	NULL
+-};
+-
+-/* mmuinfo command */
+-static BOOL_32 cmd_mmuinfo(void);
+-static UNS_32 cmd_mmuinfo_plist[] =
+-{
+-	(PARSE_TYPE_STR | PARSE_TYPE_END) /* The "mmuinfo" command */
+-};
+-static CMD_ROUTE_T core_mmuinfo_cmd =
+-{
+-	(UNS_8 *) "mmuinfo",
+-	cmd_mmuinfo,
+-	(UNS_8 *) "Dumps page table and MMU info",
+-	(UNS_8 *) "mmuinfo",
+-	cmd_mmuinfo_plist,
+-	NULL
+-};
+-
+-/* MMU group */
+-static GROUP_LIST_T mmu_group =
+-{
+-	(UNS_8 *) "mmu", /* mmu group */
+-	(UNS_8 *) "MMU command group",
+-	NULL,
+-	NULL
+-};
+-
+-static UNS_8 enabled_msg [] =" enabled";
+-static UNS_8 disabled_msg [] =" disabled";
+-static UNS_8 dcache_msg[] = "Data cache";
+-static UNS_8 icache_msg[] = "Instruction cache";
+-static UNS_8 pagetab_msg[] = "Page table at address: ";
+-static UNS_8 slist_msg[] = "Type        Virt       Phy        fl Size";
+-static UNS_8 mmu_msg [] ="MMU";
+-static UNS_8 cpage_msg[] = "Coarse page:";
+-static UNS_8 fpage_msg[] = "Fine page  :";
+-static UNS_8 sect_msg[] =  "Section    :";
+-static UNS_8 mbytes_msg[] = "M";
+-static UNS_8 map1_err_msg[] =
+-	"Error : section addresses must be aligned on a 32-bit boundary";
+-static UNS_8 map2_err_msg[] =
+-	"Error : Number of sections exceeds address range of device";
+-static UNS_8 phya_msg[] = "Virtual address ";
+-static UNS_8 mapped_msg[] = " mapped to physical address ";
+-static UNS_8 unmapped_msg[] = " unmapped from physical address ";
+-static UNS_8 cached_msg[] = " (cached)";
+-static UNS_8 inval_msg[] = " invalidated";
+-static UNS_8 caches_msg [] ="Caches";
+-static UNS_8 flushed_msg[] = " flushed";
+-
+-/***********************************************************************
+- *
+- * Function: show_section
+- *
+- * Purpose: Display section information
+- *
+- * Processing:
+- *     See function.
+- *
+- * Parameters:
+- *     mmu_reg   : MMU settings for this section
+- *     virt_addr : Starting virtual address for this section
+- *     segs      : Number of 1M segments for this section
+- *
+- * Outputs: None
+- *
+- * Returns: Nothing
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-static void show_section(UNS_32 mmu_reg,
+-						 UNS_32 virt_addr,
+-						 UNS_32 segs) 
+-{
+-	UNS_8 straddr [16];
+-	UNS_32 mmu_phy;
+-
+-	if ((mmu_reg & ARM922T_L1D_TYPE_PG_SN_MASK) !=
+-		ARM922T_L1D_TYPE_FAULT) 
+-	{
+-		if ((mmu_reg & ARM922T_L1D_TYPE_PG_SN_MASK) ==
+-			ARM922T_L1D_TYPE_CPAGE) 
+-		{
+-			term_dat_out(cpage_msg);
+-		}
+-		else if ((mmu_reg & ARM922T_L1D_TYPE_PG_SN_MASK) ==
+-			ARM922T_L1D_TYPE_FPAGE) 
+-		{
+-			term_dat_out(fpage_msg);
+-		}
+-		else
+-		{
+-			term_dat_out(sect_msg);
+-		}
+-
+-		/* Compute virtual address */
+-		str_makehex(straddr, virt_addr, 8);
+-		term_dat_out(straddr);
+-		term_dat_out((UNS_8 *) " ");
+-
+-		/* Compute mapped physical address */
+-		if ((mmu_reg & ARM922T_L1D_TYPE_PG_SN_MASK) ==
+-		ARM922T_L1D_TYPE_SECTION) 
+-		{
+-			mmu_phy = mmu_reg & 0xFFF00000;
+-		}
+-		else 
+-		{
+-			/* Don't compute addresses for non-sections */
+-			mmu_phy = 0;
+-		}
+-		str_makehex(straddr, mmu_phy, 8);
+-		term_dat_out(straddr);
+-		term_dat_out((UNS_8 *) " ");
+-
+-		/* MMU flags */
+-		if ((mmu_reg & ARM922T_L1D_BUFFERABLE) != 0) 
+-		{
+-			term_dat_out((UNS_8 *) "b");
+-		}
+-		else 
+-		{
+-			term_dat_out((UNS_8 *) " ");
+-		}
+-		if ((mmu_reg & ARM922T_L1D_CACHEABLE) != 0) 
+-		{
+-			term_dat_out((UNS_8 *) "c");
+-		}
+-		else 
+-		{
+-			term_dat_out((UNS_8 *) " ");
+-		}
+-		term_dat_out((UNS_8 *) " ");
+-
+-		/* Displays used megabytes */
+-		str_makedec(straddr, segs);
+-		term_dat_out(straddr);
+-		term_dat_out_crlf(mbytes_msg);
+-	}
+-}
+-
+-/***********************************************************************
+- *
+- * Function: mmu_dumpinfo
+- *
+- * Purpose: Display MMU info
+- *
+- * Processing:
+- *     Display the MMU information, including enable status, cache
+- *     status, and page table.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-static BOOL_32 mmu_dumpinfo(void) 
+-{
+-	UNS_32 segsz, last_mmu_reg, mmu_vrt, mmu_reg, mmu_vrtsav = 0, *pt;
+-	UNS_32 mlast_mmu_reg, mmmu_reg;
+-	int idx;
+-	UNS_8 hexaddr [16];
+-
+-	term_dat_out(mmu_msg);
+-	if (cp15_mmu_enabled() == FALSE) 
+-	{
+-		term_dat_out_crlf(disabled_msg);
+-	}
+-	else 
+-	{
+-		term_dat_out_crlf(enabled_msg);
+-
+-	    /* Get MMU control register word */
+-  		mmu_reg = cp15_get_mmu_control_reg();
+-
+-		/* Instruction cache status */
+-		term_dat_out(icache_msg);
+-		if ((mmu_reg & ARM922T_MMU_CONTROL_I) == 0) 
+-		{
+-			term_dat_out_crlf(disabled_msg);
+-		}
+-		else 
+-		{
+-			term_dat_out_crlf(enabled_msg);
+-		}
+-
+-		/* Data cache status */
+-		term_dat_out(dcache_msg);
+-		if ((mmu_reg & ARM922T_MMU_CONTROL_C) == 0) 
+-		{
+-			term_dat_out_crlf(disabled_msg);
+-		}
+-		else 
+-		{
+-			term_dat_out_crlf(enabled_msg);
+-		}
+-
+-		term_dat_out(pagetab_msg);
+-		mmu_reg = (UNS_32) cp15_get_ttb();
+-		str_makehex(hexaddr, mmu_reg, 8);
+-		term_dat_out_crlf(hexaddr);
+-		term_dat_out_crlf(slist_msg);
+-
+-		/* Process MMU table - assume that the physical and
+-		   virtual locations of table are the same */
+-		pt = (UNS_32 *) mmu_reg;
+-		mmu_vrt = 0x0;
+-		segsz = 0xFFFFFFFF;
+-		last_mmu_reg = mlast_mmu_reg = 0xFFFFFFFF;
+-		for (idx = 0; idx < 4096; idx++) 
+-		{
+-			mmu_reg = *pt;
+-			mmmu_reg = (mmu_reg & (ARM922T_L1D_TYPE_PG_SN_MASK |
+-				ARM922T_L1D_BUFFERABLE | ARM922T_L1D_CACHEABLE));
+-			segsz = segsz + 1;
+-
+-			if ((last_mmu_reg != 0xFFFFFFFF) &&
+-				(mlast_mmu_reg != mmmu_reg))
+-			{
+-				show_section(last_mmu_reg, mmu_vrtsav, segsz);
+-				segsz = 0;
+-			}
+-
+-			if (mlast_mmu_reg != mmmu_reg) 
+-			{
+-				mmu_vrtsav = mmu_vrt;
+-				last_mmu_reg = mmu_reg;
+-				mlast_mmu_reg = mmmu_reg;
+-			}
+-
+-			pt++;
+-			mmu_vrt += 0x00100000;
+-		}
+-	}
+-
+-	return TRUE;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: mmu_dumpmap
+- *
+- * Purpose: Map a virtual address range to a physical range
+- *
+- * Processing:
+- *     From the input addresses and number of sections, generate the
+- *     appropriate entries in the page table.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-static BOOL_32 mmu_dumpmap(UNS_32 vrt,
+-						   UNS_32 phy,
+-						   UNS_32 sections,
+-						   UNS_32 cache) 
+-{
+-	BOOL_32 processed = FALSE;
+-	UNS_32 mmu_phy, mmu_vrt, tmp1 = 0, tmp2, *pt;
+-	UNS_8 hexaddr [16];
+-
+-	/* Verify address boundaries are sectional */
+-	mmu_vrt = vrt & ~ARM922T_L2D_SN_BASE_MASK;
+-	mmu_phy = phy & ~ARM922T_L2D_SN_BASE_MASK;
+-	if ((mmu_vrt != 0) || (mmu_phy != 0)) 
+-	{
+-		term_dat_out_crlf(map1_err_msg);
+-	}
+-	else 
+-	{
+-		/* Verify that address range and section count will not
+-		   exceed address range of device */
+-		tmp1 = vrt >> 20;
+-		tmp1 = (tmp1 + sections) - 1;
+-		tmp2 = phy >> 20;
+-		tmp2 = (tmp2 + sections) - 1;
+-		if ((tmp1 < 4096) && (tmp2 < 4096)) 
+-		{
+-			/* Good address range and good section count */
+-			processed = TRUE;
+-		}
+-		else 
+-		{
+-			term_dat_out_crlf(map2_err_msg);
+-		}
+-	}
+-	
+-	/* Generate static part of MMU word */
+-	if (cache == 0) 
+-	{
+-		/* Section mapped with cache disabled */
+-		tmp1 = ARM922T_L1D_TYPE_SECTION;
+-	}
+-	else if (cache == 1)
+-	{
+-		/* Section mapped with cache enabled */
+-		tmp1 = (ARM922T_L1D_BUFFERABLE | ARM922T_L1D_CACHEABLE |
+-			ARM922T_L1D_TYPE_SECTION);
+-	}
+-	else if (cache == 2)
+-	{
+-		/* Section unmapped */
+-		tmp1 = ARM922T_L1D_TYPE_FAULT;
+-	}
+-	tmp1 |= ARM922T_L1D_AP_ALL;
+-
+-	/* Offset into page table for virtual address */
+-	tmp2 = (vrt >> 20);
+-	pt = cp15_get_ttb() + tmp2;
+-
+-	/* Loop until all sections are complete */
+-	while ((sections > 0) && (processed == TRUE)) 
+-	{
+-		/* Add in physical address */
+-		tmp2 = tmp1 | (phy & ARM922T_L2D_SN_BASE_MASK);
+-
+-		/* Save new section descriptor for virtual address */
+-		*pt = tmp2;
+-
+-		/* Output message shown the map */
+-		term_dat_out(phya_msg);
+-		str_makehex(hexaddr, phy, 8);
+-		term_dat_out(hexaddr);
+-		if (cache == 2) 
+-		{
+-			term_dat_out(unmapped_msg);
+-		}
+-		else 
+-		{
+-			term_dat_out(mapped_msg);
+-		}
+-		str_makehex(hexaddr, vrt, 8);
+-		term_dat_out(hexaddr);
+-		if (cache == 1) 
+-		{
+-			term_dat_out(cached_msg);
+-		}
+-		term_dat_out_crlf((UNS_8 *) "");
+-
+-		/* Next section and page table entry*/
+-		phy += 0x00100000;
+-		vrt += 0x00100000;
+-		pt++;
+-		sections--;
+-	}
+-
+-	return processed;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: cmd_mmuinfo
+- *
+- * Purpose: Display MMU information
+- *
+- * Processing:
+- *     See function. 
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-static BOOL_32 cmd_mmuinfo(void) 
+-{
+-	mmu_dumpinfo();
+-
+-	return TRUE;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: cmd_map
+- *
+- * Purpose: Map a physical address region to a virtual region
+- *
+- * Processing:
+- *     See function. 
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-BOOL_32 cmd_map(void) 
+-{
+-	UNS_32 phy, virt, sects, ce = 0;
+-
+-	/* Get arguments */
+-	virt = cmd_get_field_val(1);
+-	phy = cmd_get_field_val(2);
+-	sects = cmd_get_field_val(3);
+-	ce = cmd_get_field_val(4);
+-
+-	if (ce <= 2) 
+-	{
+-		mmu_dumpmap(virt, phy, sects, ce);
+-	}
+-
+-	return TRUE;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: cmd_inval
+- *
+- * Purpose: MMU cache flush and invalidate
+- *
+- * Processing:
+- *     See function. 
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-BOOL_32 cmd_inval(void) 
+-{
+-	dcache_flush();
+-	icache_inval();
+-	term_dat_out(caches_msg);
+-	term_dat_out(inval_msg);
+-
+-	return TRUE;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: cmd_dcache
+- *
+- * Purpose: MMU data cache enable and disable
+- *
+- * Processing:
+- *     If the value passed in the parser is 1, enable the data cache,
+- *     otherwise disable the data cache.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-BOOL_32 cmd_dcache(void) 
+-{
+-	UNS_32 cenable;
+-	UNS_8 *ppar;
+-
+-	/* Get argument */
+-	cenable = cmd_get_field_val(1);
+-
+-	switch (cenable)
+-	{
+-		case 0:
+-			dcache_flush();
+-			cp15_set_dcache(0);
+-			ppar = disabled_msg;
+-			break;
+-
+-		case 1:
+-			cp15_invalidate_cache();
+-			cp15_set_dcache(1);
+-			ppar = enabled_msg;
+-			break;
+-
+-		case 2:
+-		default:
+-			dcache_flush();
+-			ppar = flushed_msg;
+-			break;
+-	}
+-
+-	term_dat_out(dcache_msg);
+-	term_dat_out_crlf(ppar);
+-
+-	return TRUE;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: cmd_icache
+- *
+- * Purpose: MMU instruction cache enable and disable
+- *
+- * Processing:
+- *     If the value passed in the parser is 1, enable the instruction
+- *     cache, otherwise disable the instruction cache.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-BOOL_32 cmd_icache(void)
+-{
+-	UNS_32 cenable;
+-	UNS_8 *ppar;
+-
+-	/* Get argument */
+-	cenable = cmd_get_field_val(1);
+-
+-	if (cenable == 1) 
+-	{
+-		dcache_flush();
+-		cp15_invalidate_cache();
+-		cp15_set_icache(1);
+-		ppar = enabled_msg;
+-	}
+-	else
+-	{
+-		cp15_set_icache(0);
+-		ppar = disabled_msg;
+-	}
+-
+-	term_dat_out(icache_msg);
+-	term_dat_out_crlf(ppar);
+-
+-	return TRUE;
+-}
+-
+-
+-/***********************************************************************
+- *
+- * Function: cmd_mmuenab
+- *
+- * Purpose: Enable or disable MMU
+- *
+- * Processing:
+- *     See function. 
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-BOOL_32 cmd_mmuenab(void) 
+-{
+-	UNS_8 *ppar;
+-	UNS_32 cenable;
+-
+-	term_dat_out_crlf((UNS_8 *) "Warning: Changing MMU status on "
+-		" cached and buffered code can cause system crashes.");
+-
+-	/* Get argument */
+-	cenable = cmd_get_field_val(1);
+-
+-	if (cenable == 1) 
+-	{
+-		if ((cp15_get_mmu_control_reg() & ARM922T_MMU_CONTROL_C) != 0)
+-		{
+-			cp15_invalidate_cache();
+-		}
+-
+-		cp15_set_mmu(1);
+-		ppar = enabled_msg;
+-	}
+-	else
+-	{
+-		cp15_dcache_flush();
+-		cp15_write_buffer_flush();
+-		cp15_invalidate_cache();
+-		cp15_set_mmu(0);
+-		ppar = disabled_msg;
+-	}
+-
+-	term_dat_out(mmu_msg);
+-	term_dat_out_crlf(ppar);
+-
+-	return TRUE;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: mmu_cmd_group_init
+- *
+- * Purpose: Initialize MMU command group
+- *
+- * Processing:
+- *     See function. 
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: Nothin
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-void mmu_cmd_group_init(void)
+-{
+-	/* Add MMU group */
+-	cmd_add_group(&mmu_group);
+-
+-	/* Add commands to the MMU group */
+-	cmd_add_new_command(&mmu_group, &core_dcache_cmd);
+-	cmd_add_new_command(&mmu_group, &core_icache_cmd);
+-	cmd_add_new_command(&mmu_group, &core_inval_cmd);
+-	cmd_add_new_command(&mmu_group, &core_mmuenab_cmd);
+-	cmd_add_new_command(&mmu_group, &core_map_cmd);
+-	cmd_add_new_command(&mmu_group, &core_mmuinfo_cmd);
+-}

boot/lpc32xxcdl/lpc32xxcdl-2.11-libnosys_gnu.patch

@@ -0,0 +1,188 @@
+Fix compilation and eabi issues
+
+Since we are not linking with libc anymore, we need to define our own memset,
+strlen and memcpy. Also, as we are using a *libc compiler, we need to "handle"
+exceptions (mostly division by 0) by defining raise() and
+__aeabi_unwind_cpp_pr0.
+
+Signed-off-by: Alexandre Belloni <abelloni@adeneo-embedded.com>
+---
+ csps/lpc32xx/bsps/ea3250/source/libnosys_gnu.c  |   41 +++++++++++++++++++++++
+ csps/lpc32xx/bsps/fdi3250/source/libnosys_gnu.c |   41 +++++++++++++++++++++++
+ csps/lpc32xx/bsps/phy3250/source/libnosys_gnu.c |   41 +++++++++++++++++++++++
+ 3 files changed, 123 insertions(+), 0 deletions(-)
+
+diff --git a/csps/lpc32xx/bsps/ea3250/source/libnosys_gnu.c b/csps/lpc32xx/bsps/ea3250/source/libnosys_gnu.c
+index 385b0ab..f1f0a0a 100644
+--- a/csps/lpc32xx/bsps/ea3250/source/libnosys_gnu.c
++++ b/csps/lpc32xx/bsps/ea3250/source/libnosys_gnu.c
+@@ -25,6 +25,7 @@
+ #include <errno.h>
+ #include <sys/times.h>
+ #include <sys/stat.h>
++#include <sys/types.h>
+ 
+ /* errno definition */
+ #undef errno
+@@ -125,4 +126,44 @@ int _write(int file, char *ptr, int len){
+     return 0;
+ }
+ 
++void * memset(void * s,int c,size_t count)
++{
++        char *xs = (char *) s;
++
++        while (count--)
++                *xs++ = c;
++
++        return s;
++}
++
++
++size_t strlen(const char * s)
++{
++        const char *sc;
++
++        for (sc = s; *sc != '\0'; ++sc)
++                /* nothing */;
++        return sc - s;
++}
++
++void * memcpy(void * dest,const void *src,size_t count)
++{
++        char *tmp = (char *) dest, *s = (char *) src;
++
++        while (count--)
++                *tmp++ = *s++;
++
++        return dest;
++}
++
++
++/* Dummy functions to avoid linker complaints */
++void __aeabi_unwind_cpp_pr0(void)
++{
++};
++
++void raise(void)
++{
++};
++
+ #endif /*__GNUC__*/
+diff --git a/csps/lpc32xx/bsps/fdi3250/source/libnosys_gnu.c b/csps/lpc32xx/bsps/fdi3250/source/libnosys_gnu.c
+index 385b0ab..f1f0a0a 100644
+--- a/csps/lpc32xx/bsps/fdi3250/source/libnosys_gnu.c
++++ b/csps/lpc32xx/bsps/fdi3250/source/libnosys_gnu.c
+@@ -25,6 +25,7 @@
+ #include <errno.h>
+ #include <sys/times.h>
+ #include <sys/stat.h>
++#include <sys/types.h>
+ 
+ /* errno definition */
+ #undef errno
+@@ -125,4 +126,44 @@ int _write(int file, char *ptr, int len){
+     return 0;
+ }
+ 
++void * memset(void * s,int c,size_t count)
++{
++        char *xs = (char *) s;
++
++        while (count--)
++                *xs++ = c;
++
++        return s;
++}
++
++
++size_t strlen(const char * s)
++{
++        const char *sc;
++
++        for (sc = s; *sc != '\0'; ++sc)
++                /* nothing */;
++        return sc - s;
++}
++
++void * memcpy(void * dest,const void *src,size_t count)
++{
++        char *tmp = (char *) dest, *s = (char *) src;
++
++        while (count--)
++                *tmp++ = *s++;
++
++        return dest;
++}
++
++
++/* Dummy functions to avoid linker complaints */
++void __aeabi_unwind_cpp_pr0(void)
++{
++};
++
++void raise(void)
++{
++};
++
+ #endif /*__GNUC__*/
+diff --git a/csps/lpc32xx/bsps/phy3250/source/libnosys_gnu.c b/csps/lpc32xx/bsps/phy3250/source/libnosys_gnu.c
+index cfdb674..6b50c60 100644
+--- a/csps/lpc32xx/bsps/phy3250/source/libnosys_gnu.c
++++ b/csps/lpc32xx/bsps/phy3250/source/libnosys_gnu.c
+@@ -25,6 +25,7 @@
+ #include <errno.h>
+ #include <sys/times.h>
+ #include <sys/stat.h>
++#include <sys/types.h>
+ 
+ /* errno definition */
+ #undef errno
+@@ -125,4 +126,44 @@ int _write(int file, char *ptr, int len){
+     return 0;
+ }
+ 
++void * memset(void * s,int c,size_t count)
++{
++        char *xs = (char *) s;
++
++        while (count--)
++                *xs++ = c;
++
++        return s;
++}
++
++
++size_t strlen(const char * s)
++{
++        const char *sc;
++
++        for (sc = s; *sc != '\0'; ++sc)
++                /* nothing */;
++        return sc - s;
++}
++
++void * memcpy(void * dest,const void *src,size_t count)
++{
++        char *tmp = (char *) dest, *s = (char *) src;
++
++        while (count--)
++                *tmp++ = *s++;
++
++        return dest;
++}
++
++
++/* Dummy functions to avoid linker complaints */
++void __aeabi_unwind_cpp_pr0(void)
++{
++};
++
++void raise(void)
++{
++};
++
+ #endif /*__GNUC__*/
+-- 
+1.7.7.3
+

boot/lpc32xxcdl/lpc32xxcdl-2.11-slashes.patch

@@ -0,0 +1,521 @@
+Use slashes instead of backslashes
+
+Signed-off-by: Alexandre Belloni <abelloni@adeneo-embedded.com>
+---
+ .../bsps/common/examples/buildfiles/makefile       |   10 +++---
+ .../startup/examples/burners/makefile.burner       |   16 +++++-----
+ csps/lpc32xx/bsps/ea3250/source/makefile           |   10 +++---
+ csps/lpc32xx/bsps/fdi3250/source/makefile          |   12 ++++----
+ csps/lpc32xx/bsps/phy3250/examples/makefile        |    2 +-
+ csps/lpc32xx/bsps/phy3250/source/makefile          |    2 +-
+ .../examples/Burners/nor/kickstart/makefile        |    2 +-
+ .../startup/examples/Burners/nor/norerase/makefile |    2 +-
+ .../startup/examples/Burners/nor/s1lapp/makefile   |    2 +-
+ .../examples/Burners/spi/kickstart/makefile        |    2 +-
+ csps/lpc32xx/source/makefile                       |   10 +++---
+ lpc/source/makefile                                |   10 +++---
+ makefile                                           |    2 +-
+ makerule/common/make.rules.environment             |   30 ++++++++++----------
+ makerule/lpc32xx/make.lpc32xx.gnu                  |    2 +-
+ makerule/lpc32xx/make.lpc32xx.iar                  |   12 ++++----
+ makerule/lpc32xx/make.lpc32xx.keil                 |    6 ++--
+ makerule/lpc32xx/make.lpc32xx.rvw                  |    2 +-
+ 18 files changed, 67 insertions(+), 67 deletions(-)
+
+diff --git a/csps/lpc32xx/bsps/common/examples/buildfiles/makefile b/csps/lpc32xx/bsps/common/examples/buildfiles/makefile
+index cf4977c..1da2201 100644
+--- a/csps/lpc32xx/bsps/common/examples/buildfiles/makefile
++++ b/csps/lpc32xx/bsps/common/examples/buildfiles/makefile
+@@ -25,16 +25,16 @@
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\$(CSP)\make.$(CSP).$(TOOL)
++include $(NXPMCU_SOFTWARE)/makerule/$(CSP)/make.$(CSP).$(TOOL)
+ 
+ ########################################################################
+ #
+ # Pick up the assembler and C source files in the directory  
+ #
+ ########################################################################
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.ftypes
+-AFLAGS +=-I..\Include
+-CFLAGS +=-I..\Include
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.ftypes
++AFLAGS +=-I../Include
++CFLAGS +=-I../Include
+ 
+ ########################################################################
+ #
+@@ -42,6 +42,6 @@ CFLAGS +=-I..\Include
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.build
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.build
+ 
+ 
+diff --git a/csps/lpc32xx/bsps/common/startup/examples/burners/makefile.burner b/csps/lpc32xx/bsps/common/startup/examples/burners/makefile.burner
+index fca3947..18bd703 100644
+--- a/csps/lpc32xx/bsps/common/startup/examples/burners/makefile.burner
++++ b/csps/lpc32xx/bsps/common/startup/examples/burners/makefile.burner
+@@ -22,9 +22,9 @@
+ #
+ ########################################################################
+ 
+-COMMON_BASE := $(NXPMCU_SOFTWARE)\csps\$(CSP)\bsps\common
+-include $(NXPMCU_SOFTWARE)\makerule\$(CSP)\make.$(CSP).$(TOOL)
+-include $(COMMON_BASE)\startup\examples\buildfiles\make.env
++COMMON_BASE := $(NXPMCU_SOFTWARE)/csps/$(CSP)/bsps/common
++include $(NXPMCU_SOFTWARE)/makerule/$(CSP)/make.$(CSP).$(TOOL)
++include $(COMMON_BASE)/startup/examples/buildfiles/make.env
+ 
+ ########################################################################
+ # ARM Realview
+@@ -38,7 +38,7 @@ AFLAGS += --predefine "USE_ALL_STACKS SETL {TRUE}"
+ #AFLAGS += --predefine "RW_RELOC SETL {TRUE}"
+ 
+ # This runs from IRAM
+-LDSCRIPT =$(COMMON_BASE)\startup\examples\buildfiles\ldscript_iram_rvw.ld
++LDSCRIPT =$(COMMON_BASE)/startup/examples/buildfiles/ldscript_iram_rvw.ld
+ LDFLAGS = --remove
+ MAP = --map --info=totals,sizes,unused --symbols --list
+ endif
+@@ -55,7 +55,7 @@ AFLAGS += --predefine "USE_ALL_STACKS SETL {TRUE}"
+ #AFLAGS += --predefine "RW_RELOC SETL {TRUE}"
+ 
+ # This runs from IRAM
+-LDSCRIPT =$(COMMON_BASE)\startup\examples\buildfiles\ldscript_iram_rvw.ld
++LDSCRIPT =$(COMMON_BASE)/startup/examples/buildfiles/ldscript_iram_rvw.ld
+ LDFLAGS = --remove
+ MAP = --map --info=totals,sizes,unused --symbols --list
+ endif
+@@ -72,7 +72,7 @@ AFLAGS += --defsym USE_ALL_STACKS=1
+ #AFLAGS += --defsym RW_RELOC=1
+ 
+ # This runs from IRAM
+-LDSCRIPT =$(COMMON_BASE)\startup\examples\buildfiles\ldscript_iram_gnu.ld
++LDSCRIPT =$(COMMON_BASE)/startup/examples/buildfiles/ldscript_iram_gnu.ld
+ 
+ endif
+ 
+@@ -108,7 +108,7 @@ endif
+ # Pick up the assembler and C source files in the directory  
+ #
+ ########################################################################
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.ftypes
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.ftypes
+ 
+ ########################################################################
+ #
+@@ -157,6 +157,6 @@ endif
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.build
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.build
+ 
+ .PHONY: debug bin
+diff --git a/csps/lpc32xx/bsps/ea3250/source/makefile b/csps/lpc32xx/bsps/ea3250/source/makefile
+index 7cada25..2899b20 100644
+--- a/csps/lpc32xx/bsps/ea3250/source/makefile
++++ b/csps/lpc32xx/bsps/ea3250/source/makefile
+@@ -22,16 +22,16 @@
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\$(CSP)\make.$(CSP).$(TOOL)
++include $(NXPMCU_SOFTWARE)/makerule/$(CSP)/make.$(CSP).$(TOOL)
+ 
+ ########################################################################
+ #
+ # Pick up the assembler and C source files in the directory  
+ #
+ ########################################################################
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.ftypes
+-AFLAGS +=-I..\Include
+-CFLAGS +=-I..\Include
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.ftypes
++AFLAGS +=-I../Include
++CFLAGS +=-I../Include
+ 
+ ########################################################################
+ #
+@@ -64,7 +64,7 @@ realclean: lib_realclean
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.build
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.build
+ 
+ .PHONY: all lib_clean lib_realclean
+ 
+diff --git a/csps/lpc32xx/bsps/fdi3250/source/makefile b/csps/lpc32xx/bsps/fdi3250/source/makefile
+index 4e153bb..11e4b63 100644
+--- a/csps/lpc32xx/bsps/fdi3250/source/makefile
++++ b/csps/lpc32xx/bsps/fdi3250/source/makefile
+@@ -22,16 +22,16 @@
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\$(CSP)\make.$(CSP).$(TOOL)
++include $(NXPMCU_SOFTWARE)/makerule/$(CSP)/make.$(CSP).$(TOOL)
+ 
+ ########################################################################
+ #
+ # Pick up the assembler and C source files in the directory  
+ #
+ ########################################################################
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.ftypes
+-AFLAGS +=-I..\Include
+-CFLAGS +=-I..\Include
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.ftypes
++AFLAGS +=-I../Include
++CFLAGS +=-I../Include
+ 
+ ########################################################################
+ #
+@@ -53,7 +53,7 @@ lib_clean:
+ # delete all targets this Makefile can make and all built libraries
+ # linked in
+ lib_realclean: 
+-	-@$(RM) $(BSP_LIB_DIR)\*.a
++	-@$(RM) $(BSP_LIB_DIR)/*.a
+ 	-@$(RMDIR) $(BSP_LIB_DIR)
+ 	
+ clean: lib_clean
+@@ -65,7 +65,7 @@ realclean: lib_realclean
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.build
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.build
+ 
+ .PHONY: all lib_clean lib_realclean
+ 
+diff --git a/csps/lpc32xx/bsps/phy3250/examples/makefile b/csps/lpc32xx/bsps/phy3250/examples/makefile
+index b939252..e7feaa6 100644
+--- a/csps/lpc32xx/bsps/phy3250/examples/makefile
++++ b/csps/lpc32xx/bsps/phy3250/examples/makefile
+@@ -25,7 +25,7 @@
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\$(CSP)\make.$(CSP).$(TOOL)
++include $(NXPMCU_SOFTWARE)/makerule/$(CSP)/make.$(CSP).$(TOOL)
+ 
+ SUBDIRS = adc dram_self_refresh hstimer hsuart i2c kscan lcd_colorbars
+ SUBDIRS += lcd_tsc mi2c mstimer pwm pwm_simple rtc sdcard sdcard_dma
+diff --git a/csps/lpc32xx/bsps/phy3250/source/makefile b/csps/lpc32xx/bsps/phy3250/source/makefile
+index 7c48e7d..750b776 100644
+--- a/csps/lpc32xx/bsps/phy3250/source/makefile
++++ b/csps/lpc32xx/bsps/phy3250/source/makefile
+@@ -32,7 +32,7 @@ include $(NXPMCU_SOFTWARE)/makerule/$(CSP)/make.$(CSP).$(TOOL)
+ # Pick up the assembler and C source files in the directory  
+ #
+ ########################################################################
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.ftypes
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.ftypes
+ AFLAGS +=-I../Include
+ CFLAGS +=-I../Include
+ 
+diff --git a/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/kickstart/makefile b/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/kickstart/makefile
+index 01e2b38..526d6cc 100644
+--- a/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/kickstart/makefile
++++ b/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/kickstart/makefile
+@@ -78,7 +78,7 @@ endif
+ 
+ ########################################################################
+ #
+-# Compiler\linker specific stuff
++# Compiler/linker specific stuff
+ #
+ ########################################################################
+ 
+diff --git a/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/norerase/makefile b/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/norerase/makefile
+index ce329f5..e81b8db 100644
+--- a/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/norerase/makefile
++++ b/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/norerase/makefile
+@@ -77,7 +77,7 @@ endif
+ 
+ ########################################################################
+ #
+-# Compiler\linker specific stuff
++# Compiler/linker specific stuff
+ #
+ ########################################################################
+ 
+diff --git a/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/s1lapp/makefile b/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/s1lapp/makefile
+index 4426fc7..196faec 100644
+--- a/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/s1lapp/makefile
++++ b/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/s1lapp/makefile
+@@ -77,7 +77,7 @@ endif
+ 
+ ########################################################################
+ #
+-# Compiler\linker specific stuff
++# Compiler/linker specific stuff
+ #
+ ########################################################################
+ 
+diff --git a/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/spi/kickstart/makefile b/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/spi/kickstart/makefile
+index dc73b64..39fc304 100644
+--- a/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/spi/kickstart/makefile
++++ b/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/spi/kickstart/makefile
+@@ -78,7 +78,7 @@ endif
+ 
+ ########################################################################
+ #
+-# Compiler\linker specific stuff
++# Compiler/linker specific stuff
+ #
+ ########################################################################
+ 
+diff --git a/csps/lpc32xx/source/makefile b/csps/lpc32xx/source/makefile
+index 8e05456..16bd944 100644
+--- a/csps/lpc32xx/source/makefile
++++ b/csps/lpc32xx/source/makefile
+@@ -25,16 +25,16 @@
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\$(CSP)\make.$(CSP).$(TOOL)
++include $(NXPMCU_SOFTWARE)/makerule/$(CSP)/make.$(CSP).$(TOOL)
+ 
+ ########################################################################
+ #
+ # Pick up the assembler and C source files in the directory  
+ #
+ ########################################################################
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.ftypes
+-AFLAGS +=-I..\Include
+-CFLAGS +=-I..\Include
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.ftypes
++AFLAGS +=-I../Include
++CFLAGS +=-I../Include
+ 
+ 
+ ########################################################################
+@@ -68,7 +68,7 @@ realclean: lib_realclean
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.build
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.build
+ 
+ .PHONY: all lib_clean lib_realclean
+ 
+diff --git a/lpc/source/makefile b/lpc/source/makefile
+index 2860db9..ae7d612 100644
+--- a/lpc/source/makefile
++++ b/lpc/source/makefile
+@@ -25,16 +25,16 @@
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\$(CSP)\make.$(CSP).$(TOOL)
++include $(NXPMCU_SOFTWARE)/makerule/$(CSP)/make.$(CSP).$(TOOL)
+ 
+ ########################################################################
+ #
+ # Pick up the assembler and C source files in the directory  
+ #
+ ########################################################################
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.ftypes
+-AFLAGS +=-I..\Include
+-CFLAGS +=-I..\Include
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.ftypes
++AFLAGS +=-I../Include
++CFLAGS +=-I../Include
+ 
+ ########################################################################
+ #
+@@ -67,7 +67,7 @@ realclean: lib_realclean
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.build
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.build
+ 
+ .PHONY: all lib_clean lib_realclean
+ 
+diff --git a/makefile b/makefile
+index 8645fcc..86fa6bc 100644
+--- a/makefile
++++ b/makefile
+@@ -34,7 +34,7 @@ TARGETS_CLN	=gen_clean csp_clean bsp_clean
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\$(CSP)\make.$(CSP).$(TOOL)
++include $(NXPMCU_SOFTWARE)/makerule/$(CSP)/make.$(CSP).$(TOOL)
+ 
+ ########################################################################
+ #
+diff --git a/makerule/common/make.rules.environment b/makerule/common/make.rules.environment
+index d5737fe..4e6df48 100644
+--- a/makerule/common/make.rules.environment
++++ b/makerule/common/make.rules.environment
+@@ -52,7 +52,7 @@ ASTYLE          =astyle --options=$(BUILD_ROOT)/tools/astyle.cfg
+ #
+ ########################################################################
+   
+-CSP_LIB_DIR  =$(BUILD_ROOT)\csps\$(CSP)\lib
++CSP_LIB_DIR  =$(BUILD_ROOT)/csps/$(CSP)/lib
+ 
+ ########################################################################
+ #
+@@ -60,7 +60,7 @@ CSP_LIB_DIR  =$(BUILD_ROOT)\csps\$(CSP)\lib
+ #
+ ########################################################################
+ 
+-BSP_LIB_DIR =$(BUILD_ROOT)\csps\$(CSP)\bsps\$(BSP)\lib
++BSP_LIB_DIR =$(BUILD_ROOT)/csps/$(CSP)/bsps/$(BSP)/lib
+ 
+ ########################################################################
+ #
+@@ -68,7 +68,7 @@ BSP_LIB_DIR =$(BUILD_ROOT)\csps\$(CSP)\bsps\$(BSP)\lib
+ #
+ ########################################################################
+ 
+-GEN_LIB_DIR =$(BUILD_ROOT)\$(GEN)\lib
++GEN_LIB_DIR =$(BUILD_ROOT)/$(GEN)/lib
+ 
+ ########################################################################
+ # 
+@@ -76,9 +76,9 @@ GEN_LIB_DIR =$(BUILD_ROOT)\$(GEN)\lib
+ # 
+ ########################################################################
+ 
+-CSP_DIR     =$(BUILD_ROOT)\csps\$(CSP)
+-CSP_SRC_DIR =$(CSP_DIR)\source
+-CSP_INC_DIR =$(CSP_DIR)\include
++CSP_DIR     =$(BUILD_ROOT)/csps/$(CSP)
++CSP_SRC_DIR =$(CSP_DIR)/source
++CSP_INC_DIR =$(CSP_DIR)/include
+ 
+ ########################################################################
+ # 
+@@ -86,9 +86,9 @@ CSP_INC_DIR =$(CSP_DIR)\include
+ # 
+ ########################################################################
+ 
+-BSP_DIR     =$(BUILD_ROOT)\csps\$(CSP)\bsps\$(BSP)
+-BSP_SRC_DIR =$(BSP_DIR)\source
+-BSP_INC_DIR =$(BSP_DIR)\include
++BSP_DIR     =$(BUILD_ROOT)/csps/$(CSP)/bsps/$(BSP)
++BSP_SRC_DIR =$(BSP_DIR)/source
++BSP_INC_DIR =$(BSP_DIR)/include
+ 
+ ########################################################################
+ # 
+@@ -96,9 +96,9 @@ BSP_INC_DIR =$(BSP_DIR)\include
+ # 
+ ########################################################################
+ 
+-GEN_DIR     =$(BUILD_ROOT)\$(GEN)
+-GEN_SRC_DIR =$(GEN_DIR)\source
+-GEN_INC_DIR =$(GEN_DIR)\include
++GEN_DIR     =$(BUILD_ROOT)/$(GEN)
++GEN_SRC_DIR =$(GEN_DIR)/source
++GEN_INC_DIR =$(GEN_DIR)/include
+ 
+ ########################################################################
+ #
+@@ -151,6 +151,6 @@ endif
+ # 
+ ########################################################################
+ 
+-TARGET_CSP_LIB =$(CSP_LIB_DIR)\$(CSP_ARCHIVE)
+-TARGET_BSP_LIB =$(BSP_LIB_DIR)\$(BSP_ARCHIVE)
+-TARGET_GEN_LIB =$(GEN_LIB_DIR)\$(GEN_ARCHIVE)
++TARGET_CSP_LIB =$(CSP_LIB_DIR)/$(CSP_ARCHIVE)
++TARGET_BSP_LIB =$(BSP_LIB_DIR)/$(BSP_ARCHIVE)
++TARGET_GEN_LIB =$(GEN_LIB_DIR)/$(GEN_ARCHIVE)
+diff --git a/makerule/lpc32xx/make.lpc32xx.gnu b/makerule/lpc32xx/make.lpc32xx.gnu
+index 3277d99..d80b98d 100644
+--- a/makerule/lpc32xx/make.lpc32xx.gnu
++++ b/makerule/lpc32xx/make.lpc32xx.gnu
+@@ -19,7 +19,7 @@
+ # use without further testing or modification. 
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.environment
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.environment
+ 
+ CPU      = arm926ej-s
+ CFLAGS   = -mcpu=arm926ej-s -Wall -Os
+diff --git a/makerule/lpc32xx/make.lpc32xx.iar b/makerule/lpc32xx/make.lpc32xx.iar
+index 238ebbf..27d163f 100644
+--- a/makerule/lpc32xx/make.lpc32xx.iar
++++ b/makerule/lpc32xx/make.lpc32xx.iar
+@@ -19,12 +19,12 @@
+ # use without further testing or modification. 
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.environment
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.environment
+ 
+-IARBASE   = $(IAR_ROOT)\ARM
+-IARTOOLS  = $(IARBASE)\bin
+-IAR_LIB   = $(IARBASE)\lib
+-IAR_INC   = $(IARBASE)\inc
++IARBASE   = $(IAR_ROOT)/ARM
++IARTOOLS  = $(IARBASE)/bin
++IAR_LIB   = $(IARBASE)/lib
++IAR_INC   = $(IARBASE)/inc
+ CC        = iccarm
+ CCP       = iccarm
+ AS        = iasmarm
+@@ -36,7 +36,7 @@ CFLAGS    += -I"$(IAR_INC)"
+ AFLAGS    = --cpu 5TEJ
+ LDFLAGS   = 
+ LK        = "$(TARGET_GEN_LIB)" "$(TARGET_CSP_LIB)" "$(TARGET_BSP_LIB)"
+-;LK        += "$(IAR_LIB)\dl4tpannl8f.r79"
++;LK        += "$(IAR_LIB)/dl4tpannl8f.r79"
+ MAP       = --map
+ LDESC     = --config
+ ENTRY     = --entry
+diff --git a/makerule/lpc32xx/make.lpc32xx.keil b/makerule/lpc32xx/make.lpc32xx.keil
+index dd27583..7334d3f 100644
+--- a/makerule/lpc32xx/make.lpc32xx.keil
++++ b/makerule/lpc32xx/make.lpc32xx.keil
+@@ -19,7 +19,7 @@
+ # use without further testing or modification. 
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.environment
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.environment
+ 
+ CC        =armcc
+ CCP       =armcc
+@@ -27,11 +27,11 @@ AS        =armasm
+ LD        =armlink
+ AR        =armar -r -s
+ CFLAGS    =--arm -O3 -g --device DARMP3 -D__MICROLIB 
+-CFLAGS    +=-I$(KEIL_RVCT)\inc -I$(CSP_INC_DIR) -I$(BSP_INC_DIR) -I$(GEN_INC_DIR) 
++CFLAGS    +=-I$(KEIL_RVCT)/inc -I$(CSP_INC_DIR) -I$(BSP_INC_DIR) -I$(GEN_INC_DIR) 
+ AFLAGS    =--arm --device=DARMP3 
+ AFLAGS    +=-I$(CSP_INC_DIR) -I$(BSP_INC_DIR) -I$(GEN_INC_DIR)
+ LDFLAGS   =--noremove
+-LK        =--device DARMP3 --libpath $(KEIL_RVCT)\lib --scan $(TARGET_CSP_LIB)
++LK        =--device DARMP3 --libpath $(KEIL_RVCT)/lib --scan $(TARGET_CSP_LIB)
+ LK        +=--scan $(TARGET_BSP_LIB) 
+ LK        +=--scan $(TARGET_GEN_LIB)
+ MAP       =--map --list
+diff --git a/makerule/lpc32xx/make.lpc32xx.rvw b/makerule/lpc32xx/make.lpc32xx.rvw
+index 59961dd..2419976 100644
+--- a/makerule/lpc32xx/make.lpc32xx.rvw
++++ b/makerule/lpc32xx/make.lpc32xx.rvw
+@@ -19,7 +19,7 @@
+ # use without further testing or modification. 
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.environment
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.environment
+ 
+ CC        =armcc
+ CCP       =armcpp
+-- 
+1.7.7.3
+

boot/lpc32xxcdl/lpc32xxcdl.mk

@@ -0,0 +1,70 @@
+#############################################################
+#
+# LPC32XX CDL
+#
+#############################################################
+
+LPC32XXCDL_VERSION = lpc32xx_cdl_v2.11
+LPC32XXCDL_SITE = http://git.lpcware.com/lpc3xxx_cdl.git
+LPC32XXCDL_SITE_METHOD = git
+
+LPC32XXCDL_INSTALL_TARGET = NO
+LPC32XXCDL_INSTALL_IMAGES = YES
+
+ifeq ($(BR2_TARGET_LPC32XXCDL_BOARDNAME),"ea3250")
+LPC32XXCDL_KICKSTART = kickstart/nand
+LPC32XXCDL_KICKSTART_BURNER = nand/kickstart
+LPC32XXCDL_S1L = s1l
+LPC32XXCDL_S1L_BURNER = nand/s1lapp
+endif
+
+ifeq ($(BR2_TARGET_LPC32XXCDL_BOARDNAME),"phy3250")
+LPC32XXCDL_KICKSTART = kickstart/kickstart_nand
+LPC32XXCDL_KICKSTART_BURNER = nand/kickstart
+LPC32XXCDL_S1L = s1l/s1l_nand_boot
+LPC32XXCDL_S1L_BURNER = nand/s1lapp
+endif
+
+ifeq ($(BR2_TARGET_LPC32XXCDL_BOARDNAME),"fdi3250")
+LPC32XXCDL_KICKSTART = kickstart/nand
+LPC32XXCDL_KICKSTART_BURNER = nand/kickstart_jtag
+LPC32XXCDL_S1L = s1l
+LPC32XXCDL_S1L_BURNER = nand/s1lapp_jtag
+endif
+
+LPC32XXCDL_BUILD_FLAGS = \
+	CROSS_COMPILE=$(TARGET_CROSS)           \
+	NXPMCU_WINBASE=$(@D)                    \
+	NXPMCU_SOFTWARE=$(@D)                   \
+	BSP=$(BR2_TARGET_LPC32XXCDL_BOARDNAME)  \
+	CSP=lpc32xx TOOL=gnu GEN=lpc
+
+LPC32XXCDL_BOARD_STARTUP_DIR = \
+	csps/lpc32xx/bsps/$(BR2_TARGET_LPC32XXCDL_BOARDNAME)/startup/examples/
+
+# Source files are with dos newlines, which our patch infrastructure doesn't
+# handle. Work around it by converting the affected files to unix newlines
+# before patching
+define LPC32XXCDL_DOS2UNIX_FOR_PATCH
+	sed -n 's|^[+-]\{3\} [^/]\+\([^ \t]*\)\(.*\)|$(@D)\1|p' \
+		boot/lpc32xxcdl/*.patch| sort -u | xargs $(SED) 's/\x0D$$//'
+endef
+
+LPC32XXCDL_POST_EXTRACT_HOOKS += LPC32XXCDL_DOS2UNIX_FOR_PATCH
+
+define LPC32XXCDL_BUILD_CMDS
+	$(MAKE1) $(LPC32XXCDL_BUILD_FLAGS) -C $(@D)
+	$(MAKE1) $(LPC32XXCDL_BUILD_FLAGS) -C $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/Burners/$(LPC32XXCDL_KICKSTART_BURNER)
+	$(MAKE1) $(LPC32XXCDL_BUILD_FLAGS) -C $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/$(LPC32XXCDL_KICKSTART)
+	$(MAKE1) $(LPC32XXCDL_BUILD_FLAGS) -C $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/Burners/$(LPC32XXCDL_S1L_BURNER)
+	$(MAKE1) $(LPC32XXCDL_BUILD_FLAGS) -C $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/$(LPC32XXCDL_S1L)
+endef
+
+define LPC32XXCDL_INSTALL_IMAGES_CMDS
+	cp $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/Burners/$(LPC32XXCDL_KICKSTART_BURNER)/*gnu.bin $(BINARIES_DIR)
+	cp $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/$(LPC32XXCDL_KICKSTART)/*gnu.bin $(BINARIES_DIR)
+	cp $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/Burners/$(LPC32XXCDL_S1L_BURNER)/*gnu.bin $(BINARIES_DIR)
+	cp $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/$(LPC32XXCDL_S1L)/*gnu.bin $(BINARIES_DIR)
+endef
+
+$(eval $(call GENTARGETS))

boot/syslinux/Config.in

@@ -0,0 +1,16 @@
+config BR2_TARGET_SYSLINUX
+	bool "syslinux"
+	depends on BR2_i386 || BR2_x86_64
+	help
+	  The syslinux bootloader for x86 systems.
+	  This includes: syslinux, pxelinux, extlinux.
+
+config BR2_TARGET_SYSLINUX_ISOLINUX
+	bool "Install isolinux"
+	depends on BR2_TARGET_SYSLINUX
+	default y
+
+config BR2_TARGET_SYSLINUX_PXELINUX
+	bool "Install pxelinux"
+	depends on BR2_TARGET_SYSLINUX
+	default y

boot/syslinux/syslinux.mk

@@ -0,0 +1,43 @@
+#############################################################
+#
+# syslinux to make target msdos/iso9660 filesystems bootable
+#
+#############################################################
+
+SYSLINUX_VERSION = 4.04
+SYSLINUX_SOURCE  = syslinux-$(SYSLINUX_VERSION).tar.bz2
+SYSLINUX_SITE    = $(BR2_KERNEL_MIRROR)/linux/utils/boot/syslinux/4.xx/
+
+SYSLINUX_INSTALL_TARGET = NO
+SYSLINUX_INSTALL_IMAGES = YES
+
+SYSLINUX_DEPENDENCIES = host-nasm
+
+define SYSLINUX_BUILD_CMDS
+	$(TARGET_MAKE_ENV) $(MAKE) CC="$(HOSTCC)" AR="$(HOSTAR)" -C $(@D)
+endef
+
+SYSLINUX_IMAGES-$(BR2_TARGET_SYSLINUX_ISOLINUX) += isolinux.bin
+SYSLINUX_IMAGES-$(BR2_TARGET_SYSLINUX_PXELINUX) += pxelinux.bin
+
+define SYSLINUX_INSTALL_IMAGES_CMDS
+	for i in $(SYSLINUX_IMAGES-y); do \
+		$(INSTALL) -D -m 0755 $(@D)/core/$$i $(BINARIES_DIR)/$$i; \
+	done
+endef
+
+
+define HOST_SYSLINUX_BUILD_CMDS
+	$(HOST_MAKE_ENV) $(MAKE) -C $(@D)
+endef
+
+define HOST_SYSLINUX_INSTALL_CMDS
+	$(HOST_MAKE_ENV) $(MAKE) -C $(@D) INSTALLROOT=$(HOST_DIR) install
+endef
+
+define HOST_SYSLINUX_CLEAN_CMDS
+	$(HOST_MAKE_ENV) $(MAKE) -C $(@D) clean
+endef
+
+$(eval $(call GENTARGETS))
+$(eval $(call GENTARGETS,host))

boot/uboot/Config.in

@@ -0,0 +1,140 @@
+config BR2_TARGET_UBOOT
+	bool "U-Boot"
+	help
+	  Build "Das U-Boot" Boot Monitor
+
+if BR2_TARGET_UBOOT
+config BR2_TARGET_UBOOT_BOARDNAME
+	string "U-Boot board name"
+	help
+	  One of U-Boot supported boards to be built.
+	  This will be suffixed with _config to meet U-Boot standard naming.
+
+choice
+	prompt "U-Boot Version"
+	default BR2_TARGET_UBOOT_2011_12
+	help
+	  Select the specific U-Boot version you want to use
+
+config BR2_TARGET_UBOOT_2011_12
+	bool "2011.12"
+
+config BR2_TARGET_UBOOT_2011_09
+	bool "2011.09"
+
+config BR2_TARGET_UBOOT_2011_06
+	bool "2011.06"
+	depends on BR2_DEPRECATED
+
+config BR2_TARGET_UBOOT_2011_03
+	bool "2011.03"
+	depends on BR2_DEPRECATED
+
+config BR2_TARGET_UBOOT_CUSTOM_TARBALL
+	bool "Custom tarball"
+
+config BR2_TARGET_UBOOT_CUSTOM_GIT
+	bool "Custom Git repository"
+
+endchoice
+
+if BR2_TARGET_UBOOT_CUSTOM_TARBALL
+
+config BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION
+	string "URL of custom U-Boot tarball"
+
+endif
+
+config BR2_TARGET_UBOOT_VERSION
+	string
+	default "2011.12"	if BR2_TARGET_UBOOT_2011_12
+	default "2011.09"	if BR2_TARGET_UBOOT_2011_09
+	default "2011.06"	if BR2_TARGET_UBOOT_2011_06
+	default "2011.03"	if BR2_TARGET_UBOOT_2011_03
+	default "custom"	if BR2_TARGET_UBOOT_CUSTOM_TARBALL
+	default $BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION if BR2_TARGET_UBOOT_CUSTOM_GIT
+
+config BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR
+	string "custom patch dir"
+	help
+	  If your board requires custom patches, add the path to the
+	  directory containing the patches here. The patches must be
+	  named uboot-<version>-<something>.patch.
+
+	  Most users may leave this empty
+
+if BR2_TARGET_UBOOT_CUSTOM_GIT
+
+config BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL
+	string "URL of custom Git repository"
+
+config BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION
+	string "Custom Git version"
+
+endif
+
+choice
+	prompt "U-Boot binary format"
+
+config BR2_TARGET_UBOOT_FORMAT_BIN
+	bool "u-boot.bin"
+
+config BR2_TARGET_UBOOT_FORMAT_NAND_BIN
+	bool "u-boot-nand.bin"
+
+config BR2_TARGET_UBOOT_FORMAT_KWB
+	depends on BR2_arm
+	bool "u-boot.kwb (Marvell)"
+
+config BR2_TARGET_UBOOT_FORMAT_LDR
+	depends on BR2_bfin
+	bool "u-boot.ldr"
+
+endchoice
+
+menuconfig BR2_TARGET_UBOOT_NETWORK
+	bool "Custom Network Settings"
+	help
+	  Custom network settings for U-boot
+
+if BR2_TARGET_UBOOT_NETWORK
+
+config BR2_TARGET_UBOOT_SERVERIP
+	string "server ip"
+	default "10.175.196.221"
+	help
+	  TFTP server ip address
+
+config BR2_TARGET_UBOOT_IPADDR
+	string "ip address"
+	default "10.175.196.18"
+	help
+	  Target ip address
+
+config BR2_TARGET_UBOOT_GATEWAY
+	string "gateway ip"
+	default "10.175.196.1"
+	help
+	  Gateway ip address
+
+config BR2_TARGET_UBOOT_NETMASK
+	string "netmask"
+	default "255.255.255.0"
+	help
+	  Network Mask
+
+config BR2_TARGET_UBOOT_ETHADDR
+	string "ethernet address"
+	default "04:25:fe:ed:00:18"
+	help
+	  Target MAC address for the ethernet interface.
+	  This should be changed for production units
+
+config BR2_TARGET_UBOOT_ETH1ADDR
+	string "ethernet 2 address"
+	help
+	  Target MAC address for the second ethernet interface.
+
+endif # BR2_TARGET_UBOOT_NETWORK
+
+endif # BR2_TARGET_UBOOT

boot/uboot/uboot-2011.12/uboot-2011.12-change-kernel-address-in-dataflash.patch

@@ -0,0 +1,181 @@
+From 9fc4787c7a6c797db649831f86e49c4bf9780b4e Mon Sep 17 00:00:00 2001
+From: Alexandre Belloni <alexandre.belloni@piout.net>
+Date: Mon, 2 Jan 2012 03:51:11 +0100
+Subject: [PATCH] Change kernel address in dataflash to match u-boot's size
+
+On at91sam platforms, u-boot grew larger than the allocated size in
+dataflash, the layout was:
+bootstrap  0x00000000
+ubootenv   0x00004200
+uboot      0x00008400
+kernel     0x00042000
+
+u-boot with the defconfig doesn't seem to fit in 0x42000 - 0x8400 =
+0x39C00 bytes anymore.
+
+Now, the layout is:
+bootstrap  0x00000000
+uboot      0x00004000
+ubootenv   0x00084000
+ubootenv2  0x00088000
+kernel     0x0008C000
+
+Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net>
+---
+ include/configs/at91sam9260ek.h |   18 ++++++++++++------
+ include/configs/at91sam9261ek.h |   18 ++++++++++++------
+ include/configs/at91sam9263ek.h |   10 +++++++---
+ include/configs/at91sam9rlek.h  |   10 +++++++---
+ 4 files changed, 38 insertions(+), 18 deletions(-)
+
+diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
+index db52ee6..b537760 100644
+--- a/include/configs/at91sam9260ek.h
++++ b/include/configs/at91sam9260ek.h
+@@ -185,10 +185,12 @@
+ /* bootstrap + u-boot + env + linux in dataflash on CS0 */
+ #define CONFIG_ENV_IS_IN_DATAFLASH	1
+ #define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
+-#define CONFIG_ENV_OFFSET		0x4200
++#define CONFIG_ENV_OFFSET		0x84000
+ #define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
+-#define CONFIG_ENV_SIZE		0x4200
+-#define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
++#define CONFIG_ENV_SIZE		0x4000
++#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR+CONFIG_ENV_SIZE)
++#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
++#define CONFIG_BOOTCOMMAND	"cp.b 0xC008C000 0x22000000 0x210000; bootm"
+ #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
+ 				"root=/dev/mtdblock0 "			\
+ 				"mtdparts=atmel_nand:-(root) "		\
+@@ -199,10 +201,12 @@
+ /* bootstrap + u-boot + env + linux in dataflash on CS1 */
+ #define CONFIG_ENV_IS_IN_DATAFLASH	1
+ #define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400)
+-#define CONFIG_ENV_OFFSET		0x4200
++#define CONFIG_ENV_OFFSET		0x84000
+ #define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET)
+-#define CONFIG_ENV_SIZE		0x4200
+-#define CONFIG_BOOTCOMMAND	"cp.b 0xD0042000 0x22000000 0x210000; bootm"
++#define CONFIG_ENV_SIZE		0x4000
++#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR+CONFIG_ENV_SIZE)
++#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
++#define CONFIG_BOOTCOMMAND	"cp.b 0xD008C000 0x22000000 0x210000; bootm"
+ #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
+ 				"root=/dev/mtdblock0 "			\
+ 				"mtdparts=atmel_nand:-(root) "		\
+@@ -231,6 +235,8 @@
+ #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+ #define CONFIG_SYS_LONGHELP		1
+ #define CONFIG_CMDLINE_EDITING	1
++#define CONFIG_AUTO_COMPLETE
++#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+ 
+ /*
+  * Size of malloc() pool
+diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
+index 5140b26..fa461da 100644
+--- a/include/configs/at91sam9261ek.h
++++ b/include/configs/at91sam9261ek.h
+@@ -187,10 +187,12 @@
+ /* bootstrap + u-boot + env + linux in dataflash on CS0 */
+ #define CONFIG_ENV_IS_IN_DATAFLASH
+ #define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
+-#define CONFIG_ENV_OFFSET	0x4200
++#define CONFIG_ENV_OFFSET	0x84000
+ #define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
+-#define CONFIG_ENV_SIZE		0x4200
+-#define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
++#define CONFIG_ENV_SIZE		0x4000
++#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR+CONFIG_ENV_SIZE)
++#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
++#define CONFIG_BOOTCOMMAND	"cp.b 0xC008C000 0x22000000 0x210000; bootm"
+ #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
+ 				"root=/dev/mtdblock0 "			\
+ 				"mtdparts=atmel_nand:-(root) "		\
+@@ -201,10 +203,12 @@
+ /* bootstrap + u-boot + env + linux in dataflash on CS3 */
+ #define CONFIG_ENV_IS_IN_DATAFLASH
+ #define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + 0x8400)
+-#define CONFIG_ENV_OFFSET	0x4200
++#define CONFIG_ENV_OFFSET	0x84000
+ #define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + CONFIG_ENV_OFFSET)
+-#define CONFIG_ENV_SIZE		0x4200
+-#define CONFIG_BOOTCOMMAND	"cp.b 0xD0042000 0x22000000 0x210000; bootm"
++#define CONFIG_ENV_SIZE		0x4000
++#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR+CONFIG_ENV_SIZE)
++#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
++#define CONFIG_BOOTCOMMAND	"cp.b 0xD008C000 0x22000000 0x210000; bootm"
+ #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
+ 				"root=/dev/mtdblock0 "			\
+ 				"mtdparts=atmel_nand:-(root) "		\
+@@ -233,6 +237,8 @@
+ #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+ #define CONFIG_SYS_LONGHELP
+ #define CONFIG_CMDLINE_EDITING
++#define CONFIG_AUTO_COMPLETE
++#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+ 
+ /*
+  * Size of malloc() pool
+diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
+index 8399246..253bee4 100644
+--- a/include/configs/at91sam9263ek.h
++++ b/include/configs/at91sam9263ek.h
+@@ -314,10 +314,12 @@
+ /* bootstrap + u-boot + env + linux in dataflash on CS0 */
+ #define CONFIG_ENV_IS_IN_DATAFLASH	1
+ #define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
+-#define CONFIG_ENV_OFFSET		0x4200
++#define CONFIG_ENV_OFFSET		0x84000
+ #define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
+-#define CONFIG_ENV_SIZE		0x4200
+-#define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
++#define CONFIG_ENV_SIZE		0x4000
++#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR+CONFIG_ENV_SIZE)
++#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
++#define CONFIG_BOOTCOMMAND	"cp.b 0xC008C000 0x22000000 0x210000; bootm"
+ #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
+ 				"root=/dev/mtdblock0 " \
+ 				"mtdparts=atmel_nand:-(root) "\
+@@ -347,6 +349,8 @@
+ #define CONFIG_AUTO_COMPLETE
+ #define CONFIG_SYS_HUSH_PARSER
+ #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
++#define CONFIG_AUTO_COMPLETE
++#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+ 
+ /*
+  * Size of malloc() pool
+diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
+index 79ea1f2..423f523 100644
+--- a/include/configs/at91sam9rlek.h
++++ b/include/configs/at91sam9rlek.h
+@@ -153,10 +153,12 @@
+ /* bootstrap + u-boot + env + linux in dataflash on CS0 */
+ #define CONFIG_ENV_IS_IN_DATAFLASH	1
+ #define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
+-#define CONFIG_ENV_OFFSET		0x4200
++#define CONFIG_ENV_OFFSET		0x84000
+ #define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
+-#define CONFIG_ENV_SIZE		0x4200
+-#define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
++#define CONFIG_ENV_SIZE		0x4000
++#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR+CONFIG_ENV_SIZE)
++#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
++#define CONFIG_BOOTCOMMAND	"cp.b 0xC008C000 0x22000000 0x210000; bootm"
+ #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
+ 				"root=/dev/mtdblock0 " \
+ 				"mtdparts=atmel_nand:-(root) "\
+@@ -183,6 +185,8 @@
+ #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+ #define CONFIG_SYS_LONGHELP		1
+ #define CONFIG_CMDLINE_EDITING		1
++#define CONFIG_AUTO_COMPLETE
++#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+ 
+ /*
+  * Size of malloc() pool
+-- 
+1.7.5.4
+

boot/uboot/uboot.mk

@@ -0,0 +1,102 @@
+#############################################################
+#
+# U-Boot
+#
+#############################################################
+UBOOT_VERSION    = $(call qstrip,$(BR2_TARGET_UBOOT_VERSION))
+UBOOT_BOARD_NAME = $(call qstrip,$(BR2_TARGET_UBOOT_BOARDNAME))
+
+UBOOT_INSTALL_IMAGES = YES
+
+ifeq ($(UBOOT_VERSION),custom)
+# Handle custom U-Boot tarballs as specified by the configuration
+UBOOT_TARBALL = $(call qstrip,$(BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION))
+UBOOT_SITE    = $(dir $(UBOOT_TARBALL))
+UBOOT_SOURCE  = $(notdir $(UBOOT_TARBALL))
+else ifeq ($(BR2_TARGET_UBOOT_CUSTOM_GIT),y)
+UBOOT_SITE        = $(call qstrip,$(BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL))
+UBOOT_SITE_METHOD = git
+else
+# Handle stable official U-Boot versions
+UBOOT_SITE    = ftp://ftp.denx.de/pub/u-boot
+UBOOT_SOURCE  = u-boot-$(UBOOT_VERSION).tar.bz2
+endif
+
+ifeq ($(BR2_TARGET_UBOOT_FORMAT_KWB),y)
+UBOOT_BIN          = u-boot.kwb
+UBOOT_MAKE_TARGET  = $(UBOOT_BIN)
+else ifeq ($(BR2_TARGET_UBOOT_FORMAT_LDR),y)
+UBOOT_BIN          = u-boot.ldr
+else ifeq ($(BR2_TARGET_UBOOT_FORMAT_NAND_BIN),y)
+UBOOT_BIN          = u-boot-nand.bin
+else
+UBOOT_BIN          = u-boot.bin
+endif
+
+UBOOT_ARCH=$(KERNEL_ARCH)
+
+UBOOT_CONFIGURE_OPTS += CONFIG_NOSOFTFLOAT=1
+UBOOT_MAKE_OPTS += \
+	CROSS_COMPILE="$(CCACHE) $(TARGET_CROSS)" \
+	ARCH=$(UBOOT_ARCH)
+
+# Helper function to fill the U-Boot config.h file.
+# Argument 1: option name
+# Argument 2: option value
+# If the option value is empty, this function does nothing.
+define insert_define
+$(if $(call qstrip,$(2)),
+	@echo "#ifdef $(strip $(1))" >> $(@D)/include/config.h
+	@echo "#undef $(strip $(1))" >> $(@D)/include/config.h
+	@echo "#endif" >> $(@D)/include/config.h
+	@echo '#define $(strip $(1)) $(call qstrip,$(2))' >> $(@D)/include/config.h)
+endef
+
+ifneq ($(call qstrip,$(BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR)),)
+define UBOOT_APPLY_CUSTOM_PATCHES
+	support/scripts/apply-patches.sh $(@D) $(BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR) \
+		uboot-$(UBOOT_VERSION)-\*.patch
+endef
+
+UBOOT_POST_PATCH_HOOKS += UBOOT_APPLY_CUSTOM_PATCHES
+endif
+
+define UBOOT_CONFIGURE_CMDS
+	$(TARGET_CONFIGURE_OPTS) $(UBOOT_CONFIGURE_OPTS) 	\
+		$(MAKE) -C $(@D) $(UBOOT_MAKE_OPTS)		\
+		$(UBOOT_BOARD_NAME)_config
+	@echo >> $(@D)/include/config.h
+	@echo "/* Add a wrapper around the values Buildroot sets. */" >> $(@D)/include/config.h
+	@echo "#ifndef __BR2_ADDED_CONFIG_H" >> $(@D)/include/config.h
+	@echo "#define __BR2_ADDED_CONFIG_H" >> $(@D)/include/config.h
+	$(call insert_define,DATE,$(DATE))
+	$(call insert_define,CONFIG_LOAD_SCRIPTS,1)
+	$(call insert_define,CONFIG_IPADDR,$(BR2_TARGET_UBOOT_IPADDR))
+	$(call insert_define,CONFIG_GATEWAYIP,$(BR2_TARGET_UBOOT_GATEWAY))
+	$(call insert_define,CONFIG_NETMASK,$(BR2_TARGET_UBOOT_NETMASK))
+	$(call insert_define,CONFIG_SERVERIP,$(BR2_TARGET_UBOOT_SERVERIP))
+	$(call insert_define,CONFIG_ETHADDR,$(BR2_TARGET_UBOOT_ETHADDR))
+	$(call insert_define,CONFIG_ETH1ADDR,$(BR2_TARGET_UBOOT_ETH1ADDR))
+	@echo "#endif /* __BR2_ADDED_CONFIG_H */" >> $(@D)/include/config.h
+endef
+
+define UBOOT_BUILD_CMDS
+	$(TARGET_CONFIGURE_OPTS) $(UBOOT_CONFIGURE_OPTS) 	\
+		$(MAKE) -C $(@D) $(UBOOT_MAKE_OPTS) 		\
+		$(UBOOT_MAKE_TARGET)
+endef
+
+define UBOOT_INSTALL_IMAGES_CMDS
+	cp -dpf $(@D)/$(UBOOT_BIN) $(BINARIES_DIR)/
+endef
+
+$(eval $(call GENTARGETS))
+
+ifeq ($(BR2_TARGET_UBOOT),y)
+# we NEED a board name unless we're at make source
+ifeq ($(filter source,$(MAKECMDGOALS)),)
+ifeq ($(UBOOT_BOARD_NAME),)
+$(error NO U-Boot board name set. Check your BR2_TARGET_UBOOT_BOARDNAME setting)
+endif
+endif
+endif

boot/xloader/Config.in

@@ -0,0 +1,15 @@
+config BR2_TARGET_XLOADER
+	bool "X-loader"
+	depends on BR2_cortex_a8 || BR2_cortex_a9
+	help
+	  The x-loader bootloader. It is mainly used on OMAP-based
+	  platforms.
+
+if BR2_TARGET_XLOADER
+config BR2_TARGET_XLOADER_BOARDNAME
+	string "x-loader board name"
+	help
+	  One of x-loader supported boards to be built.
+	  This will be suffixed with _config to meet x-loader
+	  standard naming.
+endif

boot/xloader/xloader.mk

@@ -0,0 +1,37 @@
+#############################################################
+#
+# x-loader
+#
+#############################################################
+XLOADER_VERSION    = 6f3a26101303051e0f91b6213735b68ce804e94e
+XLOADER_SITE       = git://gitorious.org/x-loader/x-loader.git
+XLOADER_BOARD_NAME = $(call qstrip,$(BR2_TARGET_XLOADER_BOARDNAME))
+
+XLOADER_INSTALL_IMAGES = YES
+
+define XLOADER_BUILD_CMDS
+	$(MAKE) CROSS_COMPILE="$(TARGET_CROSS)" -C $(@D) $(XLOADER_BOARD_NAME)_config
+	$(MAKE) CROSS_COMPILE="$(TARGET_CROSS)" -C $(@D) all
+	$(MAKE) CROSS_COMPILE="$(TARGET_CROSS)" -C $(@D) ift
+endef
+
+define XLOADER_INSTALL_IMAGES_CMDS
+	$(INSTALL) -D -m 0755 $(@D)/MLO $(BINARIES_DIR)/
+endef
+
+$(eval $(call GENTARGETS))
+
+#############################################################
+#
+# Toplevel Makefile options
+#
+#############################################################
+ifeq ($(BR2_TARGET_XLOADER),y)
+# we NEED a board name unless we're at make source
+ifeq ($(filter source,$(MAKECMDGOALS)),)
+ifeq ($(XLOADER_BOARD_NAME),)
+$(error NO x-loader board name set. Check your BR2_BOOT_XLOADER_BOARDNAME setting)
+endif
+endif
+
+endif

configs/armadeus_apf9328_defconfig

@@ -0,0 +1,31 @@
+# Architecture
+BR2_arm=y
+BR2_arm920t=y
+
+# Toolchain
+BR2_STRIP_sstrip=y
+BR2_GCC_VERSION_4_4_X=y
+BR2_PACKAGE_GDB=y
+BR2_PACKAGE_GDB_HOST=y
+BR2_ENABLE_LOCALE_PURGE=y
+BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
+BR2_TOOLCHAIN_BUILDROOT_INET_IPV6=y
+BR2_TOOLCHAIN_BUILDROOT_INET_RPC=y
+BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
+BR2_TOOLCHAIN_BUILDROOT_CXX=y
+
+# System
+BR2_TARGET_GENERIC_HOSTNAME="apf9328"
+BR2_TARGET_GENERIC_ISSUE="Welcome to Armadeus development platform !"
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
+
+# Filesystem
+BR2_TARGET_ROOTFS_JFFS2=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.1.1"
+BR2_LINUX_KERNEL_PATCH="board/armadeus/apf9328"
+BR2_LINUX_KERNEL_DEFCONFIG="mx1"

configs/at91rm9200df_defconfig

@@ -0,0 +1,23 @@
+# Architecture
+BR2_arm=y
+
+# Filesystem
+BR2_TARGET_ROOTFS_JFFS2=y
+BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_1056=y
+BR2_TARGET_ROOTFS_JFFS2_PAGESIZE=0x420
+BR2_TARGET_ROOTFS_JFFS2_EBSIZE=0x2100
+BR2_TARGET_ROOTFS_JFFS2_NOCLEANMARKER=y
+BR2_TARGET_ROOTFS_JFFS2_LE=y
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="at91rm9200ek"
+BR2_TARGET_UBOOT_2010_06=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="2.6.33"
+BR2_LINUX_KERNEL_PATCH="http://maxim.org.za/AT91RM9200/2.6/2.6.33-at91.patch.gz"
+BR2_LINUX_KERNEL_USE_DEFCONFIG=y
+BR2_LINUX_KERNEL_DEFCONFIG="at91rm9200ek"

configs/at91sam9260dfc_defconfig

@@ -0,0 +1,21 @@
+# Architecture
+BR2_arm=y
+BR2_arm926t=y
+
+# First stage bootloader
+BR2_TARGET_AT91BOOTSTRAP=y
+BR2_TARGET_AT91BOOTSTRAP_BOARD="at91sam9260ek"
+BR2_TARGET_AT91BOOTSTRAP_DATAFLASH=y
+
+# Second stage bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="at91sam9260ek_dataflash_cs0"
+BR2_TARGET_UBOOT_2011_12=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_USE_DEFCONFIG=y
+BR2_LINUX_KERNEL_DEFCONFIG="at91sam9260ek"
+
+# Filesystem
+BR2_TARGET_ROOTFS_TAR=y

configs/at91sam9261ek_defconfig

@@ -0,0 +1,21 @@
+# Architecture
+BR2_arm=y
+BR2_arm926t=y
+
+# First stage bootloader
+BR2_TARGET_AT91BOOTSTRAP=y
+BR2_TARGET_AT91BOOTSTRAP_BOARD="at91sam9261ek"
+BR2_TARGET_AT91BOOTSTRAP_DATAFLASH=y
+
+# Second stage bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="at91sam9261ek_dataflash_cs0"
+BR2_TARGET_UBOOT_2011_12=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_USE_DEFCONFIG=y
+BR2_LINUX_KERNEL_DEFCONFIG="at91sam9261"
+
+# Filesystem
+BR2_TARGET_ROOTFS_TAR=y

configs/at91sam9263ek_defconfig

@@ -0,0 +1,21 @@
+# Architecture
+BR2_arm=y
+BR2_arm926t=y
+
+# First stage bootloader
+BR2_TARGET_AT91BOOTSTRAP=y
+BR2_TARGET_AT91BOOTSTRAP_BOARD="at91sam9263ek"
+BR2_TARGET_AT91BOOTSTRAP_DATAFLASH=y
+
+# Second stage bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="at91sam9263ek_dataflash_cs0"
+BR2_TARGET_UBOOT_2011_12=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_USE_DEFCONFIG=y
+BR2_LINUX_KERNEL_DEFCONFIG="at91sam9263"
+
+# Filesystem
+BR2_TARGET_ROOTFS_TAR=y

configs/at91sam9g20dfc_defconfig

@@ -0,0 +1,22 @@
+# Architecture
+BR2_arm=y
+BR2_arm926t=y
+
+# First stage bootloader
+BR2_TARGET_AT91BOOTSTRAP=y
+BR2_TARGET_AT91BOOTSTRAP_BOARD="at91sam9g20ek"
+BR2_TARGET_AT91BOOTSTRAP_DATAFLASHCARD=y
+
+# Second stage bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="at91sam9g20ek_nandflash"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.1.6"
+BR2_LINUX_KERNEL_USE_DEFCONFIG=y
+BR2_LINUX_KERNEL_DEFCONFIG="at91sam9g20ek"
+
+# Filesystem
+BR2_TARGET_ROOTFS_TAR=y

configs/atngw100_defconfig

@@ -0,0 +1,24 @@
+# Architecture
+BR2_avr32=y
+
+# Filesystems
+BR2_TARGET_ROOTFS_JFFS2=y
+BR2_TARGET_ROOTFS_JFFS2_FLASH_128=y
+BR2_TARGET_ROOTFS_JFFS2_PAGESIZE=0x1000
+BR2_TARGET_ROOTFS_JFFS2_EBSIZE=0x20000
+BR2_TARGET_ROOTFS_JFFS2_NOCLEANMARKER=y
+BR2_TARGET_ROOTFS_JFFS2_BE=y
+BR2_TARGET_ROOTFS_TAR=y
+BR2_TARGET_ROOTFS_TAR_NONE=y
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="atngw100"
+BR2_TARGET_UBOOT_2010_09=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="2.6.35"
+BR2_LINUX_KERNEL_USE_DEFCONFIG=y
+BR2_LINUX_KERNEL_DEFCONFIG="atngw100"

configs/atstk100x_defconfig

@@ -0,0 +1,19 @@
+# Architecture
+BR2_avr32=y
+
+# U-Boot
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="atstk1002"
+BR2_TARGET_UBOOT_2010_09=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="2.6.35"
+BR2_LINUX_KERNEL_USE_DEFCONFIG=y
+BR2_LINUX_KERNEL_DEFCONFIG="atstk1002"
+
+# Filesystem
+BR2_TARGET_ROOTFS_TAR=y
+
+

configs/ea3250_defconfig

@@ -0,0 +1,39 @@
+# Architecture
+BR2_arm=y
+BR2_arm926t=y
+
+BR2_ARM_TYPE="ARM926T"
+BR2_ARM_EABI=y
+
+#
+# GCC Options
+# We need to force GCC 4.3.x because it is the last version
+# that will compile a kernel with ethernet working correctly
+BR2_GCC_VERSION_4_3_X=y
+
+
+# Bootloaders
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="ea3250"
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_VERSION="master"
+BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL="git://git.lpclinux.com/uboot-2009.03-lpc32xx"
+BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION="master"
+BR2_TARGET_UBOOT_FORMAT_BIN=y
+BR2_TARGET_LPC32XXCDL=y
+BR2_TARGET_LPC32XXCDL_BOARDNAME="ea3250"
+
+
+#
+# Kernel
+#
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://git.lpclinux.com/linux-2.6.34-lpc32xx"
+BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="master"
+BR2_LINUX_KERNEL_VERSION="master"
+BR2_LINUX_KERNEL_PATCH=""
+BR2_LINUX_KERNEL_USE_DEFCONFIG=y
+BR2_LINUX_KERNEL_DEFCONFIG="ea3250"
+BR2_LINUX_KERNEL_UIMAGE=y
+

configs/fdi3250_defconfig

@@ -0,0 +1,39 @@
+# Architecture
+BR2_arm=y
+BR2_arm926t=y
+
+BR2_ARM_TYPE="ARM926T"
+BR2_ARM_EABI=y
+
+#
+# GCC Options
+# We need to force GCC 4.3.x because it is the last version
+# that will compile a kernel with ethernet working correctly
+BR2_GCC_VERSION_4_3_X=y
+
+
+# Bootloaders
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="fdi3250"
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_VERSION="master"
+BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL="git://git.lpclinux.com/uboot-2009.03-lpc32xx"
+BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION="master"
+BR2_TARGET_UBOOT_FORMAT_BIN=y
+BR2_TARGET_LPC32XXCDL=y
+BR2_TARGET_LPC32XXCDL_BOARDNAME="fdi3250"
+
+
+#
+# Kernel
+#
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://git.lpclinux.com/linux-2.6.34-lpc32xx"
+BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="master"
+BR2_LINUX_KERNEL_VERSION="master"
+BR2_LINUX_KERNEL_PATCH=""
+BR2_LINUX_KERNEL_USE_DEFCONFIG=y
+BR2_LINUX_KERNEL_DEFCONFIG="fdi3250"
+BR2_LINUX_KERNEL_UIMAGE=y
+

configs/integrator926_defconfig

@@ -0,0 +1,17 @@
+# Architecture
+BR2_arm=y
+BR2_arm926t=y
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="cp926ejs"
+BR2_TARGET_UBOOT_2010_06=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_2_6_35=
+BR2_LINUX_KERNEL_USE_DEFCONFIG=y
+BR2_LINUX_KERNEL_DEFCONFIG="integrator"
+
+# Filesystem
+BR2_TARGET_ROOTFS_TAR=y

configs/kb9202_defconfig

@@ -0,0 +1,14 @@
+# Architecture
+BR2_arm=y
+BR2_arm920t=y
+
+# Filesystem
+BR2_TARGET_ROOTFS_TAR=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="2.6.33"
+BR2_LINUX_KERNEL_PATCH="http://maxim.org.za/AT91RM9200/2.6/2.6.33-at91.patch.gz"
+BR2_LINUX_KERNEL_USE_DEFCONFIG=y
+BR2_LINUX_KERNEL_DEFCONFIG="kb9202"

configs/mini2440_defconfig

@@ -0,0 +1,31 @@
+# Architecture
+BR2_arm=y
+BR2_arm920t=y
+
+# Serial port
+BR2_TARGET_GENERIC_GETTY=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttySAC0"
+
+# Filesystem
+BR2_TARGET_ROOTFS_JFFS2=y
+BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_2K_128K=y
+BR2_TARGET_ROOTFS_JFFS2_PAGESIZE=0x800
+BR2_TARGET_ROOTFS_JFFS2_EBSIZE=0x20000
+BR2_TARGET_ROOTFS_JFFS2_NOCLEANMARKER=y
+BR2_TARGET_ROOTFS_JFFS2_LE=y
+BR2_TARGET_ROOTFS_TAR=y
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="mini2440"
+BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="http://repo.or.cz/w/u-boot-openmoko/mini2440.git/snapshot/dev-mini2440-stable.tar.gz"
+
+#
+# Kernel
+#
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.0.4"
+BR2_LINUX_KERNEL_DEFCONFIG="mini2440"
+BR2_LINUX_KERNEL_UIMAGE=y

configs/phy3250_defconfig

@@ -0,0 +1,39 @@
+# Architecture
+BR2_arm=y
+BR2_arm926t=y
+
+BR2_ARM_TYPE="ARM926T"
+BR2_ARM_EABI=y
+
+#
+# GCC Options
+# We need to force GCC 4.3.x because it is the last version
+# that will compile a kernel with ethernet working correctly
+BR2_GCC_VERSION_4_3_X=y
+
+
+# Bootloaders
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="phy3250"
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_VERSION="master"
+BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL="git://git.lpclinux.com/uboot-2009.03-lpc32xx"
+BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION="master"
+BR2_TARGET_UBOOT_FORMAT_BIN=y
+BR2_TARGET_LPC32XXCDL=y
+BR2_TARGET_LPC32XXCDL_BOARDNAME="phy3250"
+
+
+#
+# Kernel
+#
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://git.lpclinux.com/linux-2.6.34-lpc32xx"
+BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="master"
+BR2_LINUX_KERNEL_VERSION="master"
+BR2_LINUX_KERNEL_PATCH=""
+BR2_LINUX_KERNEL_USE_DEFCONFIG=y
+BR2_LINUX_KERNEL_DEFCONFIG="phy3250"
+BR2_LINUX_KERNEL_UIMAGE=y
+

configs/qemu_arm_versatile_defconfig

@@ -0,0 +1,19 @@
+# Architecture
+BR2_arm=y
+BR2_arm926t=y
+
+# system
+BR2_TARGET_GENERIC_GETTY=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
+
+# filesystem
+BR2_TARGET_ROOTFS_EXT2=y
+# BR2_TARGET_ROOTFS_TAR is not set
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.6"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-3.2.config"
+BR2_LINUX_KERNEL_ZIMAGE=y

configs/qemu_mips_malta_defconfig

@@ -0,0 +1,19 @@
+# Architecture
+BR2_mips=y
+BR2_mips_32r2=y
+
+# filesystem
+BR2_TARGET_ROOTFS_EXT2=y
+# BR2_TARGET_ROOTFS_TAR is not set
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.6"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-3.2.config"
+BR2_LINUX_KERNEL_VMLINUX=y
+
+# Serial port config
+BR2_TARGET_GENERIC_GETTY=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"

configs/qemu_mipsel_malta_defconfig

@@ -0,0 +1,19 @@
+# Architecture
+BR2_mipsel=y
+BR2_mips_32r2=y
+
+# filesystem
+BR2_TARGET_ROOTFS_EXT2=y
+# BR2_TARGET_ROOTFS_TAR is not set
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.6"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-3.2.config"
+BR2_LINUX_KERNEL_VMLINUX=y
+
+# Serial port config
+BR2_TARGET_GENERIC_GETTY=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"

configs/qemu_ppc_g3beige_defconfig

@@ -0,0 +1,19 @@
+# Architecture
+BR2_powerpc=y
+BR2_powerpc_440fp=y
+
+# filesystem
+BR2_TARGET_ROOTFS_EXT2=y
+# BR2_TARGET_ROOTFS_TAR is not set
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.6"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/powerpc-g3beige/linux-3.2.config"
+BR2_LINUX_KERNEL_VMLINUX=y
+
+# Serial port config
+BR2_TARGET_GENERIC_GETTY=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"

configs/qemu_sh4_r2d_defconfig

@@ -0,0 +1,24 @@
+# Architecture
+BR2_sh=y
+BR2_sh4=y
+
+# system
+BR2_TARGET_GENERIC_GETTY=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttySC1"
+
+# filesystem
+BR2_TARGET_ROOTFS_EXT2=y
+# BR2_TARGET_ROOTFS_TAR is not set
+
+# The kernel wants to use the -m4-nofpu option to make sure that it
+# doesn't use floating point operations.
+BR2_GCC_VERSION_4_5_X=y
+BR2_EXTRA_GCC_CONFIG_OPTIONS="--with-multilib-list=m4,m4-nofpu"
+
+# Linux kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.6"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-3.2.config"
+BR2_LINUX_KERNEL_ZIMAGE=y

configs/qemu_sparc_ss10_defconfig

@@ -0,0 +1,14 @@
+# Architecture
+BR2_sparc=y
+BR2_sparc_supersparc=y
+
+# filesystem
+BR2_TARGET_ROOTFS_EXT2=y
+# BR2_TARGET_ROOTFS_TAR is not set
+
+# Linux kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.6"
+BR2_LINUX_KERNEL_DEFCONFIG="sparc32"
+BR2_LINUX_KERNEL_ZIMAGE=y

configs/qemu_x86_64_defconfig

@@ -0,0 +1,17 @@
+# Architecture
+BR2_x86_64=y
+
+# system
+BR2_TARGET_GENERIC_GETTY=y
+BR2_TARGET_GENERIC_GETTY_PORT="tty1"
+
+# filesystem
+BR2_TARGET_ROOTFS_EXT2=y
+# BR2_TARGET_ROOTFS_TAR is not set
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.6"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-3.2.config"

configs/qemu_x86_defconfig

@@ -0,0 +1,18 @@
+# Architecture
+BR2_i386=y
+BR2_x86_pentiumpro=y
+
+# system
+BR2_TARGET_GENERIC_GETTY=y
+BR2_TARGET_GENERIC_GETTY_PORT="tty1"
+
+# filesystem
+BR2_TARGET_ROOTFS_EXT2=y
+# BR2_TARGET_ROOTFS_TAR is not set
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.6"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-3.2.config"

configs/sheevaplug_defconfig

@@ -0,0 +1,24 @@
+# Architecture
+BR2_arm=y
+BR2_arm926t=y
+
+# system
+BR2_TARGET_GENERIC_GETTY=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
+
+# filesystem
+BR2_TARGET_ROOTFS_JFFS2=y
+BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_2K_128K=y
+
+# bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="sheevaplug"
+BR2_TARGET_UBOOT_FORMAT_KWB=y
+# BR2_TARGET_UBOOT_NETWORK is not set
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="2.6.39.4"
+BR2_LINUX_KERNEL_DEFCONFIG="kirkwood"
+BR2_LINUX_KERNEL_UIMAGE=y

docs/README

@@ -1,18 +1,16 @@
 To build and use the buildroot stuff, do the following:
 
-1) run 'make'
+1) run 'make menuconfig'
 2) select the packages you wish to compile
 3) run 'make'
 4) wait while it compiles
-5) Use your shiny new root filesystem.  Depending on which sortof
+5) Use your shiny new root filesystem. Depending on which sort of
     root filesystem you selected, you may want to loop mount it,
     chroot into it, nfs mount it on your target device, burn it
     to flash, or whatever is appropriate for your target system.
 
 You do not need to be root to build or run buildroot.  Have fun!
 
- -Erik
-
 Offline build:
 ==============
 
@@ -26,23 +24,36 @@ and your toplevel .config to a machine that has an internet-connection
 and issue "make source" there, then copy the content of your dl/ dir to
 the build-host.
 
+Building out-of-tree:
+=====================
+
+Buildroot supports building out of tree with a syntax similar
+to the Linux kernel. To use it, add O=<directory> to the
+make command line, E.G.:
+
+$ make O=/tmp/build
+
+And all the output files (including .config) will be located under /tmp/build.
+
 More finegrained configuration:
 ===============================
 
 You can specify a config-file for uClibc:
 $ make UCLIBC_CONFIG_FILE=/my/uClibc.config
 
-To use a non-standart host-compiler (if you do not have 'gcc'),
+And you can specify a config-file for busybox:
+$ make BUSYBOX_CONFIG_FILE=/my/busybox.config
+
+To use a non-standard host-compiler (if you do not have 'gcc'),
 make sure that the compiler is in your PATH and that the library paths are
 setup properly, if your compiler is built dynamically:
 $ make HOSTCC=gcc-4.3.orig HOSTCXX=gcc-4.3-mine
 
 Depending on your configuration, there are some targets you can use to
 use menuconfig of certain packages. This includes:
-$ make HOSTCC=gcc-4.3 linux26-menuconfig
+$ make HOSTCC=gcc-4.3 linux-menuconfig
 $ make HOSTCC=gcc-4.3 uclibc-menuconfig
 $ make HOSTCC=gcc-4.3 busybox-menuconfig
 
-Please feed suggestions, bug reports, insults, and bribes back to:
-	Erik Andersen <andersen@codepoet.org>
-or the buildroot mailing list.
+Please feed suggestions, bug reports, insults, and bribes back to the
+buildroot mailing list: buildroot@uclibc.org

docs/about.html

@@ -3,24 +3,62 @@
 
 <!-- Begin Introduction section -->
 
-<h3>buildroot: making Embedded Linux easy</h3>
+<h3>Buildroot: making Embedded Linux easy</h3>
 
+<div align="center">
+<a href="images/menuconfig.png">
+ <img src="images/menuconfig_small.png" width="340" height="220"
+ alt="Buildroot menuconfig" border="0">
+</a>
+</div>
 
-Buildroot is a set of Makefiles and patches that makes it easy generate a
-cross-compilation toolchain and root filesystem for your target Linux
-system using the <a href= "http://www.uclibc.org/">uClibc C library</a>.
-Buildroot is useful mainly for people working with small or embedded
-systems.  Embedded systems often use processors that are not the regular
-x86 processors everyone is used to using on their PC. It can be PowerPC
-processors, MIPS processors, ARM processors, etc.  And to be extra safe,
-you do not need to be root to build or run buildroot.
+<p>Buildroot is a set of Makefiles and patches that makes it easy to
+generate a complete embedded Linux system. Buildroot can generate any
+or all of a cross-compilation toolchain, a root filesystem, a kernel
+image and a bootloader image. Buildroot is useful mainly for people
+working with small or embedded systems, using various CPU
+architectures (x86, ARM, MIPS, PowerPC, etc.) : it automates the
+building process of your embedded system and eases the
+cross-compilation process.</p>
 
-<p>
+<p>The major Buildroot features are:</p>
 
-buildroot is maintained by <a href=
-"http://codepoet.org/andersen/erik/erik.html">Erik Andersen</a>, and
-licensed under the
-<a href="http://www.gnu.org/copyleft/lgpl.html">GNU LIBRARY GENERAL PUBLIC LICENSE</a>.
+<ul>
+
+  <li>Can <b>handle everything</b> in your embedded system development
+  project: cross-compiling toolchain, root filesystem generation,
+  kernel image compilation and bootloader compilation. Buildroot is
+  also sufficiently flexible that it can also be used for only one or
+  several of these steps.</li>
+
+  <li>Is <b>very easy</b> to set up, thanks to its menuconfig, gconfig
+  and xconfig configuration interfaces, familiar to all embedded Linux
+  developers. Building a basic embedded Linux system with Buildroot
+  typically takes 15-30 minutes.</li>
+
+  <li>Supports <b>several hundreds of packages</b> for userspace
+  applications and libraries: X.org stack, Gtk2, Qt, DirectFB, SDL,
+  GStreamer and a large number of network-related and system-related
+  utilities and libraries are supported.</li>
+
+  <li>Supports <b>multiple filesystem types</b> for the root
+  filesystem image: JFFS2, UBIFS, tarballs, romfs, cramfs, squashfs
+  and more.</li>
+
+  <li>Can generate an uClibc cross-compilation toolchain, or re-use
+  your existing glibc, eglibc or uClibc cross-compilation
+  toolchain</li>
+
+  <li>Has a <b>simple structure</b> that makes it easy to understand
+  and extend. It relies only on the well-known Makefile language.</li>
+
+</ul>
+
+<p>Buildroot is maintained by <a href=
+"mailto:jacmet@uclibc.org">Peter Korsgaard</a>, and licensed under the
+<a href="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html">GNU
+GENERAL PUBLIC LICENSE V2 (Or later)</a>. Stable releases are
+delivered every three months.</p>
 
 
 <!--#include file="footer.html" -->

docs/copyright.txt

@@ -1,6 +1,7 @@
 
 The code and graphics on this website (and it's mirror sites, if any) are
-Copyright (c) 1999-2005 by Erik Andersen.  All rights reserved.
+Copyright (c) 1999-2005 by Erik Andersen, 2006-2011 The Buildroot
+developers. All rights reserved.
 
 Documents on this Web site including their graphical elements, design, and
 layout are protected by trade dress and other laws and MAY BE COPIED OR
@@ -24,6 +25,6 @@ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
 
 You have been warned.
 
-You can contact the webmaster at <andersen@codepoet.org> if you have some sort
+You can contact the webmaster at <buildroot@uclibc.org> if you have some sort
 of problem with this.
 

docs/developer.html

@@ -1,63 +1,46 @@
 <!--#include file="header.html" -->
 
 
-<h3>Subversion Read/Write Access</h3>
+<h3>Developer Access</h3>
 
-If you want to be able to commit things to Subversion, first contribute some
-stuff to show you are serious.  Then, very nicely ask <a
-href="mailto:andersen@codepoet.org">Erik Andersen</a> if he will set you up
-with an commit access to the Subversion repository.  To access Subversion, you
-will want to add the following to set up your environment:
+Because we use Git for version control, you don't need developer (ssh)
+access on uclibc.org to contribute to Buildroot, but you can request
+it if needed.
 
 <p>
 
-To obtain commit access, you will need to demonstrate you are serious by
-submitting a few good patches first.  Then, you will need to select a username
-to use when committing changes to SVN, you will need to send me the username
-you have selected, you must send me your preferred contact email address, and
-finally, you must send me an ssh version 2 DSA key with 1024 bits (the default)
-or more.  If you do not currently have an ssh version 2 DSA key, you can
-generate a key using the command<pre>ssh-keygen -t dsa</pre>  This will
-create the files <pre>/home/&lt;USERNAME&gt;/ssh/id_dsa
-/home/&lt;USERNAME&gt;/.ssh/id_dsa.pub</pre>  You must then send the content
-of 'id_dsa.pub' to me so I can setup your account.  The content of 'id_dsa'
-should of course be kept secret.
+To obtain developer access, you will need to demonstrate you are
+serious by submitting a few good patches first.  Then, you will need
+to select a username to use when logging in, you will need to send me
+the username you have selected, you must send me your preferred
+contact email address, and finally, you must send me an ssh version 2
+DSA key with 1024 bits (the default) or more.  If you do not currently
+have an ssh version 2 DSA key, you can generate a key using the
+command<pre>ssh-keygen -t dsa</pre> This will create the
+files <pre>/home/&lt;USERNAME&gt;/ssh/id_dsa
+/home/&lt;USERNAME&gt;/.ssh/id_dsa.pub</pre> It is recommended that
+you generate a key with a "passphrase" for security reasons.
+
+<p>
+Make the file known to the system by running
+
+<pre>ssh-add ~/.ssh/id_dsa</pre>
+
+You must then send the content of 'id_dsa.pub' to me so I can setup your account.
+The content of 'id_dsa' should of course be kept secret.
 
 <p>
 
-Note that if you would prefer to keep your communications with me
-private, you can encrypt your email using my
-<a href="http://www.codepoet.org/andersen/erik/gpg.asc">public key</a>.
+Once you have an account, you can use it to store Git
+repositories. Simply put them in subdirectories of your ~/git, and
+touch ~/git/<repo>/git-daemon-export-ok, after which the hourly
+cronjob will pick them up and show them in cgit. They are also
+available though git-daemon:
 
-<p>
-
-Once you are setup with an account, you will need to use your account to
-checkout a copy of buildroot from Subversion:
-
-<pre>
-svn list svn+ssh://username@svn.uclibc.org/svn/trunk/buildroot</pre>
-<br>
-It goes without saying you must change <em>username</em> to your own
-username...
-<p>
-
-You can then enter the newly checked out buildroot directory, make changes, check
-your changes, diff your changes, revert your changes, and and commit your
-changes usine commands such as:
-
-<pre>
-svn diff
-svn status
-svn revert
-svn commit</pre>
-
-<p>
-
-For additional detail on how to use Subversion, please visit the
-<a href="http://subversion.tigris.org/">the Subversion website</a>.
-You might also want to read online or buy a copy of <a
-href="http://svnbook.red-bean.com/">the Subversion Book</a>...
+<pre>git clone git://git.buildroot.net/~&lt;USERNAME&gt/git/&lt;REPO&gt;</pre>
 
+For additional detail on how to use Git, please visit the
+<a href="http://git-scm.org/">the Git website</a>.
 
 <!--#include file="footer.html" -->
 

docs/docs.html

@@ -1,29 +1,32 @@
 <!--#include file="header.html" -->
 
-
 <h3>Documentation</h3>
-Current documentation for buildroot includes:
+
+<p>Our document "Buildroot usage and documentation" is where you want
+to start reading if you wish to understand how Buildroot work, or wish
+to change/extend/fix things. If you find any errors (factual,
+grammatical, whatever) please report them. Choose between:</p>
+
+<ul>
+  <li><a href="/downloads/buildroot.html">Latest stable release</a></li>
+  <li><a href="buildroot.html">GIT head revision</a></li>
+</ul>
+
+<p>If you find that you need help with Buildroot, you can ask for
+help:</p>
 
 <ul>
 
-  <li>
-    <a href= "buildroot.html">Buildroot - Usage and
-    documentation</a> is where you want to start reading if you wish to
-    understand how buildroot work, or wish to change/extend/fix things.  If you
-    find any errors (factual, grammatical, whatever) please report them.
-  </li>
+  <li>On the <a href="lists.html">buildroot mailing list</a>
+  at <code>buildroot at uclibc.org</code></li>
 
-  <li>
-    <a href="README">README</a>. This is the README file included in the
-    buildroot source release.
-  </li>
+  <li>On the <a href="irc://freenode.net/#buildroot">Buildroot IRC
+  channel</a>, <code>#buildroot</code> on Freenode</li>
 
-  <li>
-    If you find that you need help with buildroot, you can ask for help on the
-    <a href= "lists/uClibc/">buildroot mailing list</a> at buildroot at mail.uclibc.org.
-    In addition the BusyBox, uClibc, and buildroot developers are also known to
-    hang out on the uClibc IRC channel: #uclibc on irc.freenode.net.
-  </li>
+  <li>On our <a href="https://bugs.uclibc.org">bugtracker</a>.</li>
+
+  <li>Through the various companies offering commercial Buildroot
+  support.</li>
 
 </ul>
 

docs/download.html

@@ -6,26 +6,40 @@
 
 <p>
 
-The best way to obtain and update your own copy of buildroot is to fetch the
-latest version using <a href="subversion.html">Subversion</a>.  You can also
-obtain <a href= "downloads/snapshots/">Daily Snapshots</a> of the latest
-buildroot source tree but cannot or do not wish to use Subversion (svn).
+The latest stable release is <b>2012.02</b>, which can be downloaded
+here:<p>
+
+<a href="/downloads/buildroot-2012.02.tar.gz">buildroot-2012.02.tar.gz</a>
+or
+<a href="/downloads/buildroot-2012.02.tar.bz2">buildroot-2012.02.tar.bz2</a>.
+<p>
+<!--
+The latest release candidate is <b>2012.02-rc3</b>, which can be
+downloaded here:<p>
+
+<a href="/downloads/buildroot-2012.02-rc3.tar.gz">buildroot-2012.02-rc3.tar.gz</a>
+or
+<a href="/downloads/buildroot-2012.02-rc3.tar.bz2">buildroot-2012.02-rc3.tar.bz2</a>.
+<p>
+-->
+This and earlier releases can always be downloaded from
+<a href="/downloads/">http://buildroot.net/downloads/</a>.
+
+<p>
+
+You can also obtain <a href="/downloads/snapshots/">Daily
+Snapshots</a> of the latest Buildroot source tree if you want to to
+follow development, but cannot or do not wish to use Git.
 
 <ul>
 	<li> Click here to <a href="downloads/snapshots/">Daily Snapshots</a>.
 	</li>
 
-	<li> Click here to <a href="/cgi-bin/viewcvs.cgi/trunk/buildroot/">browse the source tree</a>.
+	<li> Click here to <a href="http://git.buildroot.net/buildroot">browse the source tree</a>.
 	</li>
 
-	<li>Anonymous <a href="subversion.html">Subversion access</a> is available.
+	<li>Anonymous <a href="git.html">Git access</a> is available.
 	</li>
-
-	<li>For those that are actively contributing obtaining
-		<a href="developer.html">Subversion read/write access</a> is also possible.
-	</li>
-
 </ul>
 
 <!--#include file="footer.html" -->
-

docs/footer.html

@@ -9,11 +9,12 @@
 
     <p>
     <font face="arial, helvetica, sans-serif" size="-1">
-	<a HREF="/copyright.txt">Copyright &copy; 1999-2005 Erik Andersen</a>
+	<a HREF="/copyright.txt">Copyright &copy; 1999-2005 Erik Andersen,
+	2006-2011 The Buildroot developers</a>
 	<br>
 	Mail all comments, insults, suggestions and bribes to
 	<br>
-	Erik Andersen <A HREF="mailto:andersen@codepoet.org">andersen@codepoet.org</A><BR>
+	The Buildroot developers <A HREF="mailto:buildroot@uclibc.org">buildroot@uclibc.org</A><BR>
     </font>
 
   </body>

docs/git.html

@@ -0,0 +1,44 @@
+<!--#include file="header.html" -->
+
+
+<h3>Git Access</h3>
+
+The buildroot repository can be browsed online through cgit at
+<a href="http://git.buildroot.net/buildroot/">http://git.buildroot.net/buildroot</a>.
+To grab a copy of the repository use
+
+<pre>
+git clone git://git.buildroot.net/buildroot</pre>
+
+Or if you're behind a firewall blocking git:
+
+<pre>
+git clone http://git.buildroot.net/git/buildroot.git</pre>
+
+<p>
+
+Please use the native git protocol if at all possible, as it's a lot
+more efficient than HTTP.
+
+<p>
+
+If you are not already familiar with using Git, we recommend you visit <a
+href="http://git-scm.org">the Git website</a>.
+
+<p>
+
+Once you've checked out a copy of the source tree, you can update your source
+tree at any time so it is in sync with the latest and greatest by entering your
+buildroot directory and running the command:
+
+<pre>
+git pull
+</pre>
+
+Because you've only been granted anonymous access to the tree, you won't be
+able to commit any changes. Changes can be submitted for inclusion by posting
+them to the buildroot mailing list or to the <a
+href="https://bugs.uclibc.org/">Bug and Patch Tracking System</a>.
+
+<!--#include file="footer.html" -->
+

docs/header.html

@@ -15,6 +15,21 @@
      td.c2 {font-family: arial, helvetica, sans-serif; font-size: 80%}
      td.c1 {font-family: lucida, helvetica; font-size: 248%}
     </style>
+<script type="text/javascript">
+
+  var _gaq = _gaq || [];
+  _gaq.push(['_setAccount', 'UA-21761074-1']);
+  _gaq.push(['_setDomainName', 'none']);
+  _gaq.push(['_setAllowLinker', true]);
+  _gaq.push(['_trackPageview']);
+
+  (function() {
+    var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true;
+    ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js';
+    var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s);
+  })();
+
+</script>
   </head>
 
   <body>
@@ -27,28 +42,16 @@
 
 
 <tr>
-<td>
-    <div class="c3">
-      <table border="0" cellspacing="1" cellpadding="2">
-        <tr>
-          <td class="c1">BUILDROOT</td>
-        </tr>
-      </table>
-    </div>
-
-  <a href="/"><IMG SRC="images/busybox1.png" alt="Buildroot" border="0"></a><BR>
-</td>
-</tr>
-
-<tr>
-
 <td valign="TOP">
+  <a href="/"><IMG SRC="images/logo_small.png" alt="Buildroot"
+  border="0" width="200" height="100"></a><BR>
+
     <br><a href="/about.html">About</a>
     <br><a href="/news.html">Latest News</a>
     <br><a href="/download.html">Download</a>
-    <br><a href="/cgi-bin/viewcvs.cgi/trunk/buildroot/">Browse Source</a>
-    <br><a href="/subversion.html">Accessing Source</a>
-    <br><a href="http://bugs.uclibc.org/">Bug Tracking</a>
+    <br><a href="http://git.buildroot.net/buildroot/">Browse Source</a>
+    <br><a href="/git.html">Accessing Source</a>
+    <br><a href="https://bugs.uclibc.org/">Bug Tracking</a>
     <br><a href="/docs.html">Documentation</a>
     <br><a href="/lists.html">Mailing Lists</a>
 

docs/index.html

@@ -1 +1 @@
-<!--#include file="news.html" -->
+<!--#include file="about.html" -->

docs/lists.html

@@ -5,10 +5,12 @@
 <h3>Mailing List Information</h3>
 Buildroot has a <a href="/lists/buildroot/">mailing list</a> for discussion and
 development.  You can subscribe by visiting
-<a href="/mailman/listinfo/buildroot">this page</a>.
+<a href="http://lists.busybox.net/mailman/listinfo/buildroot">this page</a>.
 Only subscribers to the Buildroot mailing list are allowed to post
 to this list.
-
+<p>
+The list is also available through <a
+href="http://gmane.org">Gmane</a> at <a href="http://dir.gmane.org/gmane.comp.lib.uclibc.buildroot">gmane.comp.lib.uclibc.buildroot</a>.
 <p>
 
 <h3>Search the List Archives</h3>
@@ -19,16 +21,20 @@ list with frequently asked questions...
 <p>
 
 <center>
-<form method="GET" action="http://www.google.com/custom">
-<input type="hidden" name="domains" value="buildroot.uclibc.org">
-<input type="hidden" name="sitesearch" value="buildroot.uclibc.org">
-<input type="text" name="q" size="31" maxlength="255" value="">
-<br>
-<input type="submit" name="sa" value="search the mailing list archives">
-<br>
-<a href="http://www.google.com/"><img src="http://www.google.com/logos/Logo_25wht.gif" border="0" alt="Google" height="32" width="75" align="middle"></a>
-<br>
-</form>
+<div id="cse" style="width: 100%;">Loading</div>
+<script src="http://www.google.com/jsapi" type="text/javascript"></script>
+<script type="text/javascript">
+	google.load('search', '1', {language : 'en'});
+	google.setOnLoadCallback(function() {
+		var customSearchControl = new google.search.CustomSearchControl(
+					      '009810735161915413714:3rfmqierl8s');
+		customSearchControl.setResultSetSize(google.search.Search.FILTERED_CSE_RESULTSET);
+		var customSearchOptions = new google.search.DrawOptions();
+		customSearchOptions.enableSearchboxOnly("http://google.com/cse?cx=009810735161915413714:3rfmqierl8s");
+		customSearchControl.draw('cse', customSearchOptions);
+	}, true);
+</script>
+<link rel="stylesheet" href="http://www.google.com/cse/style/look/default.css" type="text/css" />
 </center>
 
 <!--#include file="footer.html" -->

docs/manual/adding-packages-autotargets.txt

@@ -0,0 +1,171 @@
+Infrastructure for autotools-based packages
+-------------------------------------------
+
+[[autotargets-tutorial]]
+
++AUTOTARGETS+ tutorial
+~~~~~~~~~~~~~~~~~~~~~~
+
+First, let's see how to write a +.mk+ file for an autotools-based
+package, with an example :
+
+------------------------
+01: #############################################################
+02: #
+03: # libfoo
+04: #
+05: #############################################################
+06: LIBFOO_VERSION = 1.0
+07: LIBFOO_SOURCE = libfoo-$(LIBFOO_VERSION).tar.gz
+08: LIBFOO_SITE = http://www.foosoftware.org/download
+09: LIBFOO_INSTALL_STAGING = YES
+10: LIBFOO_INSTALL_TARGET = YES
+11: LIBFOO_CONF_OPT = --enable-shared
+12: LIBFOO_DEPENDENCIES = libglib2 host-pkg-config
+13:
+14: $(eval $(call AUTOTARGETS))
+------------------------
+
+On line 6, we declare the version of the package.
+
+On line 7 and 8, we declare the name of the tarball and the location
+of the tarball on the Web. Buildroot will automatically download the
+tarball from this location.
+
+On line 9, we tell Buildroot to install the package to the staging
+directory. The staging directory, located in +output/staging/+
+is the directory where all the packages are installed, including their
+development files, etc. By default, packages are not installed to the
+staging directory, since usually, only libraries need to be installed in
+the staging directory: their development files are needed to compile
+other libraries or applications depending on them. Also by default, when
+staging installation is enabled, packages are installed in this location
+using the +make install+ command.
+
+On line 10, we tell Buildroot to also install the package to the
+target directory. This directory contains what will become the root
+filesystem running on the target. Usually, we try not to install header
+files and to install stripped versions of the binary. By default, target
+installation is enabled, so in fact, this line is not strictly
+necessary. Also by default, packages are installed in this location
+using the +make install+ command.
+
+On line 11, we tell Buildroot to pass a custom configure option, that
+will be passed to the +./configure+ script before configuring
+and building the package.
+
+On line 12, we declare our dependencies, so that they are built
+before the build process of our package starts.
+
+Finally, on line line 14, we invoke the +AUTOTARGETS+
+macro that generates all the Makefile rules that actually allows the
+package to be built.
+
+[[autotargets-reference]]
+
++AUTOTARGETS+ reference
+~~~~~~~~~~~~~~~~~~~~~~~
+
+The main macro of the autotools package infrastructure is
++AUTOTARGETS+. It has the same number of arguments and the
+same semantic as the +GENTARGETS+ macro, which is the main
+macro of the generic package infrastructure. For autotools packages, the
+ability to have target and host packages is also available (and is
+actually widely used).
+
+Just like the generic infrastructure, the autotools infrastructure
+works by defining a number of variables before calling the
++AUTOTARGETS+ macro.
+
+First, all the package metadata information variables that exist in the
+generic infrastructure also exist in the autotools infrastructure:
++LIBFOO_VERSION+, +LIBFOO_SOURCE+,
++LIBFOO_PATCH+, +LIBFOO_SITE+,
++LIBFOO_SUBDIR+, +LIBFOO_DEPENDENCIES+,
++LIBFOO_INSTALL_STAGING+, +LIBFOO_INSTALL_TARGET+.
+
+A few additional variables, specific to the autotools infrastructure,
+can also be defined. Many of them are only useful in very specific
+cases, typical packages will therefore only use a few of them.
+
+* +LIBFOO_SUBDIR+ may contain the name of a subdirectory
+  inside the package that contains the configure script. This is useful,
+  if for example, the main configure script is not at the root of the
+  tree extracted by the tarball. If +HOST_LIBFOO_SUBDIR+ is
+  not specified, it defaults to +LIBFOO_SUBDIR+.
+
+* +LIBFOO_CONF_ENV+, to specify additional environment
+  variables to pass to the configure script. By default, empty.
+
+* +LIBFOO_CONF_OPT+, to specify additional configure
+  options to pass to the configure script. By default, empty.
+
+* +LIBFOO_MAKE+, to specify an alternate +make+
+  command. This is typically useful when parallel make is enabled in
+  the configuration (using +BR2_JLEVEL+) but that this
+  feature should be disabled for the given package, for one reason or
+  another. By default, set to +$(MAKE)+. If parallel building
+  is not supported by the package, then it should be set to
+  +LIBFOO_MAKE=$(MAKE1)+.
+
+* +LIBFOO_MAKE_ENV+, to specify additional environment
+  variables to pass to make in the build step. These are passed before
+  the +make+ command. By default, empty.
+
+* +LIBFOO_MAKE_OPT+, to specify additional variables to
+  pass to make in the build step. These are passed after the
+  +make+ command. By default, empty.
+
+* +LIBFOO_AUTORECONF+, tells whether the package should
+  be autoreconfigured or not (i.e, if the configure script and
+  Makefile.in files should be re-generated by re-running autoconf,
+  automake, libtool, etc.). Valid values are +YES+ and
+  +NO+. By default, the value is +NO+
+
+* +LIBFOO_AUTORECONF_OPT+ to specify additional options
+  passed to the 'autoreconf' program if
+  +LIBFOO_AUTORECONF=YES+. By default, empty.
+
+* +LIBFOO_LIBTOOL_PATCH+ tells whether the Buildroot
+  patch to fix libtool cross-compilation issues should be applied or
+  not. Valid values are +YES+ and +NO+. By
+  default, the value is +YES+
+
+* +LIBFOO_INSTALL_STAGING_OPT+ contains the make options
+  used to install the package to the staging directory. By default, the
+  value is +DESTDIR=$$(STAGING_DIR) install+, which is
+  correct for most autotools packages. It is still possible to override
+  it.
+
+* +LIBFOO_INSTALL_TARGET_OPT+ contains the make options
+  used to install the package to the target directory. By default, the
+  value is +DESTDIR=$$(TARGET_DIR) install+. The default
+  value is correct for most autotools packages, but it is still possible
+  to override it if needed.
+
+* +LIBFOO_CLEAN_OPT+ contains the make options used to
+  clean the package. By default, the value is +clean+.
+
+* +LIBFOO_UNINSTALL_STAGING_OPT+, contains the make
+  options used to uninstall the package from the staging directory. By
+  default, the value is +DESTDIR=$$(STAGING_DIR) uninstall+.
+
+* +LIBFOO_UNINSTALL_TARGET_OPT+, contains the make
+  options used to uninstall the package from the target directory. By
+  default, the value is +DESTDIR=$$(TARGET_DIR) uninstall+.
+
+With the autotools infrastructure, all the steps required to build
+and install the packages are already defined, and they generally work
+well for most autotools-based packages. However, when required, it is
+still possible to customize what is done in any particular step:
+
+* By adding a post-operation hook (after extract, patch, configure,
+  build or install). See the reference documentation of the generic
+  infrastructure for details.
+
+* By overriding one of the steps. For example, even if the autotools
+  infrastructure is used, if the package +.mk+ file defines its
+  own +LIBFOO_CONFIGURE_CMDS+ variable, it will be used
+  instead of the default autotools one. However, using this method
+  should be restricted to very specific cases. Do not use it in the
+  general case.

docs/manual/adding-packages-cmaketargets.txt

@@ -0,0 +1,142 @@
+Infrastructure for CMake-based packages
+---------------------------------------
+
+[[cmaketargets-tutorial]]
+
++CMAKETARGETS+ tutorial
+~~~~~~~~~~~~~~~~~~~~~~~
+
+First, let's see how to write a +.mk+ file for a CMake-based package,
+with an example :
+
+------------------------
+01: #############################################################
+02: #
+03: # libfoo
+04: #
+05: #############################################################
+06: LIBFOO_VERSION = 1.0
+07: LIBFOO_SOURCE = libfoo-$(LIBFOO_VERSION).tar.gz
+08: LIBFOO_SITE = http://www.foosoftware.org/download
+09: LIBFOO_INSTALL_STAGING = YES
+10: LIBFOO_INSTALL_TARGET = YES
+11: LIBFOO_CONF_OPT = -DBUILD_DEMOS=ON
+12: LIBFOO_DEPENDENCIES = libglib2 host-pkg-config
+13:
+14: $(eval $(call CMAKETARGETS))
+------------------------
+
+On line 6, we declare the version of the package.
+
+On line 7 and 8, we declare the name of the tarball and the location
+of the tarball on the Web. Buildroot will automatically download the
+tarball from this location.
+
+On line 9, we tell Buildroot to install the package to the staging
+directory. The staging directory, located in +output/staging/+
+is the directory where all the packages are installed, including their
+development files, etc. By default, packages are not installed to the
+staging directory, since usually, only libraries need to be installed in
+the staging directory: their development files are needed to compile
+other libraries or applications depending on them. Also by default, when
+staging installation is enabled, packages are installed in this location
+using the +make install+ command.
+
+On line 10, we tell Buildroot to also install the package to the
+target directory. This directory contains what will become the root
+filesystem running on the target. Usually, we try not to install header
+files and to install stripped versions of the binary. By default, target
+installation is enabled, so in fact, this line is not strictly
+necessary. Also by default, packages are installed in this location
+using the +make install+ command.
+
+On line 11, we tell Buildroot to pass custom options to CMake when it is
+configuring the package.
+
+On line 12, we declare our dependencies, so that they are built
+before the build process of our package starts.
+
+Finally, on line line 14, we invoke the +CMAKETARGETS+
+macro that generates all the Makefile rules that actually allows the
+package to be built.
+
+[[cmaketargets-reference]]
+
++CMAKETARGETS+ reference
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+The main macro of the CMake package infrastructure is
++CMAKETARGETS+. It has the same number of arguments and the same
+semantic as the +GENTARGETS+ macro, which is the main macro of the
+generic package infrastructure. For CMake packages, the ability to
+have target and host packages is also available.
+
+Just like the generic infrastructure, the CMake infrastructure works
+by defining a number of variables before calling the +CMAKETARGETS+
+macro.
+
+First, all the package metadata information variables that exist in
+the generic infrastructure also exist in the CMake infrastructure:
++LIBFOO_VERSION+, +LIBFOO_SOURCE+, +LIBFOO_PATCH+, +LIBFOO_SITE+,
++LIBFOO_SUBDIR+, +LIBFOO_DEPENDENCIES+, +LIBFOO_INSTALL_STAGING+,
++LIBFOO_INSTALL_TARGET+.
+
+A few additional variables, specific to the CMake infrastructure, can
+also be defined. Many of them are only useful in very specific cases,
+typical packages will therefore only use a few of them.
+
+* +LIBFOO_SUBDIR+ may contain the name of a subdirectory inside the
+  package that contains the main CMakeLists.txt file. This is useful,
+  if for example, the main CMakeLists.txt file is not at the root of
+  the tree extracted by the tarball. If +HOST_LIBFOO_SUBDIR+ is not
+  specified, it defaults to +LIBFOO_SUBDIR+.
+
+* +LIBFOO_CONF_ENV+, to specify additional environment variables to
+  pass to CMake. By default, empty.
+
+* +LIBFOO_CONF_OPT+, to specify additional configure options to pass
+  to CMake. By default, empty.
+
+* +LIBFOO_MAKE+, to specify an alternate +make+ command. This is
+  typically useful when parallel make is enabled in the configuration
+  (using +BR2_JLEVEL+) but that this feature should be disabled for
+  the given package, for one reason or another. By default, set to
+  +$(MAKE)+. If parallel building is not supported by the package,
+  then it should be set to +LIBFOO_MAKE=$(MAKE1)+.
+
+* +LIBFOO_MAKE_ENV+, to specify additional environment variables to
+  pass to make in the build step. These are passed before the +make+
+  command. By default, empty.
+
+* +LIBFOO_MAKE_OPT+, to specify additional variables to pass to make
+  in the build step. These are passed after the +make+ command. By
+  default, empty.
+
+* +LIBFOO_INSTALL_STAGING_OPT+ contains the make options used to
+  install the package to the staging directory. By default, the value
+  is +DESTDIR=$$(STAGING_DIR) install+, which is correct for most
+  CMake packages. It is still possible to override it.
+
+* +LIBFOO_INSTALL_TARGET_OPT+ contains the make options used to
+  install the package to the target directory. By default, the value
+  is +DESTDIR=$$(TARGET_DIR) install+. The default value is correct
+  for most CMake packages, but it is still possible to override it if
+  needed.
+
+* +LIBFOO_CLEAN_OPT+ contains the make options used to clean the
+  package. By default, the value is +clean+.
+
+With the CMake infrastructure, all the steps required to build and
+install the packages are already defined, and they generally work well
+for most CMake-based packages. However, when required, it is still
+possible to customize what is done in any particular step:
+
+* By adding a post-operation hook (after extract, patch, configure,
+  build or install). See the reference documentation of the generic
+  infrastructure for details.
+
+* By overriding one of the steps. For example, even if the CMake
+  infrastructure is used, if the package +.mk+ file defines its own
+  +LIBFOO_CONFIGURE_CMDS+ variable, it will be used instead of the
+  default CMake one. However, using this method should be restricted
+  to very specific cases. Do not use it in the general case.