Update for 2024.08.3

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

.b4-config

@@ -3,6 +3,5 @@
 [b4]
     send-series-to = buildroot@buildroot.org
     send-auto-cc-cmd = "./utils/get-developers -e -"
-    prep-perpatch-check-cmd = "./utils/check-package -q -p -"
 
 # vim: set filetype=gitconfig:

.checkpackageignore

@@ -1,6 +1,8 @@
+board/aarch64-efi/post-image.sh Shellcheck
 board/amarula/vyasa/post-build.sh Shellcheck
 board/andes/ae350/patches/uboot/0001-mmc-ftsdc010_mci-Support-DTS-of-ftsdc010-driver-for-.patch lib_patch.Upstream
 board/andes/ae350/patches/uboot/0002-spl-Align-device-tree-blob-address-at-8-byte-boundar.patch lib_patch.Upstream
+board/andes/ae350/post-build.sh Shellcheck
 board/arcturus/aarch64-ucls1012a/post-build.sh Shellcheck
 board/arcturus/aarch64-ucls1012a/post-image.sh Shellcheck
 board/aspeed/common/post-image.sh Shellcheck
@@ -8,6 +10,9 @@ board/asus/tinker/post-build.sh Shellcheck
 board/atmel/flasher.sh Shellcheck
 board/beagleboard/beaglebone-qt5/patches/linux/0001-keep-jtag-clock-alive-for-debugger.patch lib_patch.Upstream
 board/beagleboard/beaglebone/post-build.sh Shellcheck
+board/beagleboard/beagleboneai/patches/uboot/0001-am57xx_evm-fixes.patch lib_patch.Upstream
+board/beagleboard/beagleboneai/post-build.sh Shellcheck
+board/beelink/gs1/post-build.sh Shellcheck
 board/boundarydevices/common/post-build.sh Shellcheck
 board/boundarydevices/common/post-image.sh Shellcheck
 board/broadcom/northstar/post-image.sh Shellcheck
@@ -17,17 +22,29 @@ board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh Shellcheck
 board/bsh/imx8mn-bsh-smm-s2/flash.sh Shellcheck lib_shellscript.EmptyLastLine
 board/bsh/imx8mn-bsh-smm-s2/post-build.sh Shellcheck
 board/canaan/k210-soc/post-build.sh Shellcheck
+board/canaan/k210-soc/rootfs_overlay/sbin/init Shellcheck
 board/chromebook/elm/sign.sh Shellcheck
 board/chromebook/mksd.sh Shellcheck
+board/chromebook/snow/sign.sh Shellcheck
 board/ci20/patches/uboot/0001-mips-Remove-default-endiannes.patch lib_patch.Upstream
+board/cubietech/cubieboard2/post-image.sh Shellcheck
 board/freescale/common/imx/imx8-bootloader-prepare.sh Shellcheck
 board/freescale/common/mxs/post-image.sh Shellcheck
 board/friendlyarm/nanopi-r2s/post-build.sh Shellcheck
 board/hardkernel/odroidc2/post-image.sh Shellcheck
 board/hardkernel/odroidc2/rootfs_overlay/etc/init.d/S09modload Shellcheck lib_sysv.Variables
+board/hardkernel/odroidxu4/post-image.sh Shellcheck lib_shellscript.EmptyLastLine
+board/intel/galileo/patches/linux/0001-x86-relocs-Make-per_cpu_load_addr-static.patch lib_patch.Upstream
+board/intel/galileo/post-build.sh Shellcheck
+board/intel/galileo/rootfs_overlay/etc/init.d/S09modload Shellcheck lib_sysv.Variables
 board/kontron/bl-imx8mm/post-build.sh Shellcheck
+board/kontron/pitx-imx8m/patches/uboot/2022.04/0001-tools-mkeficapsule-use-pkg-config-to-get-luuid-and-l.patch lib_patch.NumberedSubject lib_patch.Upstream
+board/kontron/pitx-imx8m/post-build.sh Shellcheck
 board/kontron/smarc-sal28/post-build.sh Shellcheck
 board/lego/ev3/post-image.sh Shellcheck
+board/lemaker/bananapro/patches/linux/0001-arch-arm-boot-dts-sun7i-a20-bananapro.dts-disable-00.patch lib_patch.Upstream
+board/lemaker/bananapro/post-build.sh Shellcheck
+board/lemaker/bananapro/post-image.sh Shellcheck
 board/minnowboard/post-build.sh Shellcheck
 board/nexbox/a95x/post-build.sh Shellcheck
 board/nexbox/a95x/post-image.sh Shellcheck
@@ -40,26 +57,40 @@ board/olimex/a20_olinuxino/post-build.sh Shellcheck
 board/olimex/a33_olinuxino/post-build.sh Shellcheck
 board/olpc/post-build.sh Shellcheck
 board/orangepi/common/post-build.sh Shellcheck
+board/orangepi/orangepi-lite2/post-build.sh Shellcheck
+board/orangepi/orangepi-one-plus/post-build.sh Shellcheck
 board/orangepi/orangepi-zero/patches/linux/0001-ARM-dts-orange-pi-zero-interrupt-triggering-xr819.patch lib_patch.Upstream
 board/orangepi/orangepi-zero/patches/linux/0002-ARM-dts-orange-pi-zero-enable-spi-nor.patch lib_patch.Upstream
 board/orangepi/orangepi-zero/patches/linux/0003-ARM-dts-orange-pi-zero-enable-spidev.patch lib_patch.Upstream
 board/orangepi/orangepi-zero/patches/linux/0004-ARM-dts-orange-pi-zero-enable-uart.patch lib_patch.Upstream
+board/pine64/rock64/patches/uboot/0001-Makefile-rk3328-needs-itb-image-to-boot-properly.patch lib_patch.Upstream
+board/pine64/rock64/post-build.sh Shellcheck
+board/pine64/rockpro64/post-build.sh Shellcheck
 board/qemu/aarch64-sbsa/assemble-flash-images Shellcheck
+board/qemu/x86/post-build.sh Shellcheck
+board/qemu/x86_64/post-build.sh Shellcheck
+board/radxa/rockpi-n8/post-build.sh Shellcheck
 board/raspberrypi/post-build.sh Shellcheck
 board/raspberrypi/post-image.sh Shellcheck
+board/roseapplepi/patches/uboot/0001-compiler-.h-sync-include-linux-compiler-.h-with-Linu.patch lib_patch.Upstream
+board/roseapplepi/post-build.sh Shellcheck
 board/seeed/stm32mp157c-odyssey/patches/linux/0001-ARM-dts-stm32-fix-stm32mp157c-odyssey-card-detect.patch lib_patch.Upstream
 board/sheevaplug/patches/uboot/0001-Remove-redundant-YYLOC-global-declaration.patch lib_patch.Upstream
+board/sifive/hifive-unleashed/post-build.sh Shellcheck
 board/solidrun/clearfog/post-build.sh Shellcheck
 board/solidrun/macchiatobin/post-build-mainline.sh Shellcheck
 board/solidrun/macchiatobin/post-build.sh Shellcheck
 board/stmicroelectronics/common/stm32f4xx/stm32-post-build.sh Shellcheck
-board/stmicroelectronics/common/stm32mp1xx/post-image.sh Shellcheck
+board/stmicroelectronics/common/stm32mp157/post-image.sh Shellcheck
 board/stmicroelectronics/stm32f429-disco/flash.sh Shellcheck
 board/stmicroelectronics/stm32f469-disco/flash_sd.sh Shellcheck
 board/stmicroelectronics/stm32f469-disco/flash_xip.sh Shellcheck
+board/stmicroelectronics/stm32f469-disco/post-build.sh Shellcheck
 board/synopsys/axs10x/post-build.sh Shellcheck
 board/technologic/ts4900/post-image.sh Shellcheck
+board/toradex/apalis-imx6/post-image.sh Shellcheck
 board/udoo/common/post-build.sh Shellcheck
+board/udoo/mx6qdl/patches/linux/0000-udoo-disable-usbh1.patch lib_patch.Upstream
 boot/afboot-stm32/0003-Makefile-disable-stack-protector.patch lib_patch.Upstream
 boot/optee-os/3.13.0/0001-core-zlib-fix-build-warning-when-_LFS64_LARGEFILE-is.patch lib_patch.Upstream
 boot/syslinux/0001-bios-Fix-alignment-change-with-gcc-5.patch lib_patch.Upstream
@@ -76,14 +107,20 @@ boot/syslinux/0013-Fix-build-with-gnu-efi-version-3.0.9.patch lib_patch.Upstream
 boot/syslinux/0014-Fix-build-with-binutils-note-gnu-property-section.patch lib_patch.Upstream
 boot/syslinux/0016-Workaround-multiple-definition-of-symbol-errors.patch lib_patch.Upstream
 boot/syslinux/0017-Replace-builtin-strlen-that-appears-to-get-optimized.patch lib_patch.Upstream
+configs/aarch64_efi_defconfig lib_defconfig.ForceCheckHash
 configs/am574x_idk_defconfig lib_defconfig.ForceCheckHash
 configs/andes_ae350_45_defconfig lib_defconfig.ForceCheckHash
 configs/arcturus_ucls1012a_defconfig lib_defconfig.ForceCheckHash
 configs/arcturus_ucp1020_defconfig lib_defconfig.ForceCheckHash
+configs/arm_foundationv8_defconfig lib_defconfig.ForceCheckHash
 configs/aspeed_ast2500evb_defconfig lib_defconfig.ForceCheckHash
 configs/aspeed_ast2600evb_defconfig lib_defconfig.ForceCheckHash
 configs/asus_tinker-s_rk3288_defconfig lib_defconfig.ForceCheckHash
 configs/asus_tinker_rk3288_defconfig lib_defconfig.ForceCheckHash
+configs/at91sam9260eknf_defconfig lib_defconfig.ForceCheckHash
+configs/at91sam9g20dfc_defconfig lib_defconfig.ForceCheckHash
+configs/at91sam9g45m10ek_defconfig lib_defconfig.ForceCheckHash
+configs/at91sam9rlek_defconfig lib_defconfig.ForceCheckHash
 configs/atmel_sama5d27_som1_ek_mmc_dev_defconfig lib_defconfig.ForceCheckHash
 configs/atmel_sama5d2_xplained_mmc_defconfig lib_defconfig.ForceCheckHash
 configs/atmel_sama5d2_xplained_mmc_dev_defconfig lib_defconfig.ForceCheckHash
@@ -91,6 +128,7 @@ configs/atmel_sama5d3_xplained_defconfig lib_defconfig.ForceCheckHash
 configs/atmel_sama5d3_xplained_dev_defconfig lib_defconfig.ForceCheckHash
 configs/atmel_sama5d3_xplained_mmc_defconfig lib_defconfig.ForceCheckHash
 configs/atmel_sama5d3_xplained_mmc_dev_defconfig lib_defconfig.ForceCheckHash
+configs/atmel_sama5d3xek_defconfig lib_defconfig.ForceCheckHash
 configs/atmel_sama5d4_xplained_defconfig lib_defconfig.ForceCheckHash
 configs/atmel_sama5d4_xplained_dev_defconfig lib_defconfig.ForceCheckHash
 configs/atmel_sama5d4_xplained_mmc_defconfig lib_defconfig.ForceCheckHash
@@ -100,14 +138,28 @@ configs/avnet_rzboard_v2l_defconfig lib_defconfig.ForceCheckHash
 configs/bananapi_m2_berry_defconfig lib_defconfig.ForceCheckHash
 configs/bananapi_m2_ultra_defconfig lib_defconfig.ForceCheckHash
 configs/bananapi_m2_zero_defconfig lib_defconfig.ForceCheckHash
+configs/bananapro_defconfig lib_defconfig.ForceCheckHash
+configs/beelink_gs1_defconfig lib_defconfig.ForceCheckHash
 configs/broadcom_northstar_defconfig lib_defconfig.ForceCheckHash
 configs/canaan_kd233_defconfig lib_defconfig.ForceCheckHash
 configs/ci20_defconfig lib_defconfig.ForceCheckHash
+configs/cubieboard2_defconfig lib_defconfig.ForceCheckHash
+configs/engicam_imx6qdl_icore_defconfig lib_defconfig.ForceCheckHash
+configs/engicam_imx6qdl_icore_qt5_defconfig lib_defconfig.ForceCheckHash
+configs/engicam_imx6qdl_icore_rqs_defconfig lib_defconfig.ForceCheckHash
+configs/engicam_imx6ul_geam_defconfig lib_defconfig.ForceCheckHash
+configs/engicam_imx6ul_isiot_defconfig lib_defconfig.ForceCheckHash
+configs/freescale_imx28evk_defconfig lib_defconfig.ForceCheckHash
 configs/freescale_p1025twr_defconfig lib_defconfig.ForceCheckHash
 configs/freescale_t1040d4rdb_defconfig lib_defconfig.ForceCheckHash
 configs/freescale_t2080_qds_rdb_defconfig lib_defconfig.ForceCheckHash
 configs/friendlyarm_nanopi_r2s_defconfig lib_defconfig.ForceCheckHash
+configs/galileo_defconfig lib_defconfig.ForceCheckHash
 configs/globalscale_espressobin_defconfig lib_defconfig.ForceCheckHash
+configs/grinn_chiliboard_defconfig lib_defconfig.ForceCheckHash
+configs/grinn_liteboard_defconfig lib_defconfig.ForceCheckHash
+configs/hifive_unleashed_defconfig lib_defconfig.ForceCheckHash
+configs/icnova-a20-adb4006_defconfig lib_defconfig.ForceCheckHash
 configs/imx23evk_defconfig lib_defconfig.ForceCheckHash
 configs/imx6-sabreauto_defconfig lib_defconfig.ForceCheckHash
 configs/imx6-sabresd_defconfig lib_defconfig.ForceCheckHash
@@ -117,12 +169,16 @@ configs/imx6sx-sdb_defconfig lib_defconfig.ForceCheckHash
 configs/imx6ulevk_defconfig lib_defconfig.ForceCheckHash
 configs/imx6ullevk_defconfig lib_defconfig.ForceCheckHash
 configs/imx6ulpico_defconfig lib_defconfig.ForceCheckHash
+configs/imx7d-sdb_defconfig lib_defconfig.ForceCheckHash
 configs/imx7dpico_defconfig lib_defconfig.ForceCheckHash
 configs/imx8mqevk_defconfig lib_defconfig.ForceCheckHash
 configs/imxrt1050-evk_defconfig lib_defconfig.ForceCheckHash
 configs/khadas_vim3_defconfig lib_defconfig.ForceCheckHash
 configs/kontron_bl_imx8mm_defconfig lib_defconfig.ForceCheckHash
+configs/kontron_pitx_imx8m_defconfig lib_defconfig.ForceCheckHash
 configs/kontron_smarc_sal28_defconfig lib_defconfig.ForceCheckHash
+configs/linksprite_pcduino_defconfig lib_defconfig.ForceCheckHash
+configs/ls1046a-frwy_defconfig lib_defconfig.ForceCheckHash
 configs/mangopi_mq1rdw2_defconfig lib_defconfig.ForceCheckHash
 configs/mender_x86_64_efi_defconfig lib_defconfig.ForceCheckHash
 configs/microchip_sam9x60ek_mmc_defconfig lib_defconfig.ForceCheckHash
@@ -144,7 +200,10 @@ configs/nitrogen8m_defconfig lib_defconfig.ForceCheckHash
 configs/nitrogen8mm_defconfig lib_defconfig.ForceCheckHash
 configs/nitrogen8mn_defconfig lib_defconfig.ForceCheckHash
 configs/nitrogen8mp_defconfig lib_defconfig.ForceCheckHash
+configs/octavo_osd32mp1_brk_defconfig lib_defconfig.ForceCheckHash
+configs/octavo_osd32mp1_red_defconfig lib_defconfig.ForceCheckHash
 configs/odroidc2_defconfig lib_defconfig.ForceCheckHash
+configs/odroidxu4_defconfig lib_defconfig.ForceCheckHash
 configs/olimex_a10_olinuxino_lime_defconfig lib_defconfig.ForceCheckHash
 configs/olimex_a13_olinuxino_defconfig lib_defconfig.ForceCheckHash
 configs/olimex_a20_olinuxino_micro_defconfig lib_defconfig.ForceCheckHash
@@ -152,17 +211,33 @@ configs/olimex_a33_olinuxino_defconfig lib_defconfig.ForceCheckHash
 configs/olimex_a64_olinuxino_defconfig lib_defconfig.ForceCheckHash
 configs/olpc_xo175_defconfig lib_defconfig.ForceCheckHash
 configs/olpc_xo1_defconfig lib_defconfig.ForceCheckHash
+configs/orangepi_lite2_defconfig lib_defconfig.ForceCheckHash
+configs/orangepi_one_defconfig lib_defconfig.ForceCheckHash
+configs/orangepi_one_plus_defconfig lib_defconfig.ForceCheckHash
 configs/orangepi_pc2_defconfig lib_defconfig.ForceCheckHash
+configs/orangepi_pc_plus_defconfig lib_defconfig.ForceCheckHash
+configs/orangepi_zero3_defconfig lib_defconfig.ForceCheckHash
+configs/orangepi_zero_defconfig lib_defconfig.ForceCheckHash
+configs/orangepi_zero_plus2_defconfig lib_defconfig.ForceCheckHash
 configs/orangepi_zero_plus_defconfig lib_defconfig.ForceCheckHash
 configs/pc_x86_64_bios_defconfig lib_defconfig.ForceCheckHash
 configs/pc_x86_64_efi_defconfig lib_defconfig.ForceCheckHash
+configs/pcengines_apu2_defconfig lib_defconfig.ForceCheckHash
 configs/pine64_defconfig lib_defconfig.ForceCheckHash
 configs/pine64_pinecube_defconfig lib_defconfig.ForceCheckHash
+configs/pine64_sopine_defconfig lib_defconfig.ForceCheckHash
 configs/pine64_star64_defconfig lib_defconfig.ForceCheckHash
+configs/riotboard_defconfig lib_defconfig.ForceCheckHash
+configs/roc_pc_rk3399_defconfig lib_defconfig.ForceCheckHash
+configs/rock64_defconfig lib_defconfig.ForceCheckHash
+configs/rock_pi_n8_defconfig lib_defconfig.ForceCheckHash
+configs/rockpro64_defconfig lib_defconfig.ForceCheckHash
+configs/roseapplepi_defconfig lib_defconfig.ForceCheckHash
 configs/s6lx9_microboard_defconfig lib_defconfig.ForceCheckHash
 configs/sipeed_lichee_rv_defconfig lib_defconfig.ForceCheckHash
 configs/sipeed_lichee_rv_dock_defconfig lib_defconfig.ForceCheckHash
 configs/sipeed_licheepi_nano_defconfig lib_defconfig.ForceCheckHash
+configs/sipeed_licheepi_zero_defconfig lib_defconfig.ForceCheckHash
 configs/sipeed_maix_bit_defconfig lib_defconfig.ForceCheckHash
 configs/sipeed_maix_bit_sdcard_defconfig lib_defconfig.ForceCheckHash
 configs/sipeed_maix_dock_defconfig lib_defconfig.ForceCheckHash
@@ -176,12 +251,16 @@ configs/snps_arc700_nsim_defconfig lib_defconfig.ForceCheckHash
 configs/snps_archs38_axs103_defconfig lib_defconfig.ForceCheckHash
 configs/snps_archs38_haps_defconfig lib_defconfig.ForceCheckHash
 configs/snps_archs38_hsdk_defconfig lib_defconfig.ForceCheckHash
+configs/socrates_cyclone5_defconfig lib_defconfig.ForceCheckHash
+configs/solidrun_clearfog_defconfig lib_defconfig.ForceCheckHash
 configs/solidrun_clearfog_gt_8k_defconfig lib_defconfig.ForceCheckHash
 configs/solidrun_macchiatobin_defconfig lib_defconfig.ForceCheckHash
 configs/stm32mp157c_odyssey_defconfig lib_defconfig.ForceCheckHash
 configs/terasic_de10nano_cyclone5_defconfig lib_defconfig.ForceCheckHash
+configs/toradex_apalis_imx6_defconfig lib_defconfig.ForceCheckHash
 configs/ts4900_defconfig lib_defconfig.ForceCheckHash
 configs/ts5500_defconfig lib_defconfig.ForceCheckHash
+configs/ts7680_defconfig lib_defconfig.ForceCheckHash
 configs/uevm5432_defconfig lib_defconfig.ForceCheckHash
 configs/visionfive_defconfig lib_defconfig.ForceCheckHash
 configs/wandboard_defconfig lib_defconfig.ForceCheckHash
@@ -211,6 +290,7 @@ package/android-tools/0009-Fix-makefiles-for-out-of-tree-ext4_utils-build.patch
 package/android-tools/0010-adb-added-patch-for-openssl-1.1.0-compatibility.patch lib_patch.Upstream
 package/aoetools/0001-Change-shell-script-interpreter-from-bin-bash-to-bin.patch lib_patch.Upstream
 package/apache/0001-cross-compile.patch lib_patch.Upstream
+package/apache/0002-nios2_is_not_os2.patch lib_patch.Upstream
 package/apache/S50apache Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/apitrace/0001-thirdparty-libbacktrace-backtrace-h-include-config.h.patch lib_patch.Upstream
 package/apitrace/0002-gltrace-Avoid-__libc_dlsym-and-__libc_dlopen_mode-on-GLIBC-2-34.patch lib_patch.Upstream
@@ -227,6 +307,7 @@ package/asterisk/0004-install-samples-need-the-data-files.patch lib_patch.Upstre
 package/at/0001-Makefile.in-fix-make-install-for-non-root-don-t-stri.patch lib_patch.Upstream
 package/at/S99at lib_sysv.Indent lib_sysv.Variables
 package/attr/0001-build-with-older-GCCs.patch lib_patch.Upstream
+package/audit/S02auditd Shellcheck lib_sysv.Variables
 package/aufs-util/0001-remove-user-settings.patch lib_patch.Upstream
 package/aufs-util/0002-no-check-ver.patch lib_patch.Upstream
 package/aufs-util/0003-no-strip-lib.patch lib_patch.Upstream
@@ -240,11 +321,13 @@ package/babeld/S50babeld Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/babeltrace2/0001-configure-simplify-warning-flags-detection.patch lib_patch.Upstream
 package/bash/0001-input.h-add-missing-include-on-stdio.h.patch lib_patch.Upstream
 package/bash/0002-parse.y-fix-compilation-for-non-multibyte-builds.patch lib_patch.Upstream
+package/bash/0003-configure-invert-condition-for-strtoimax-builtin.patch lib_patch.Upstream
 package/bc/0001-bc-use-MAKEINFO-variable-for-docs.patch lib_patch.Upstream
 package/bc/0002-notice-read-and-write-errors-on-input-and-output.patch lib_patch.Upstream
 package/bc/0003-dc-fix-exit-code-of-q-command.patch lib_patch.Upstream
 package/bc/0004-no-gen-libmath.patch lib_patch.Upstream
 package/bcache-tools/0001-Don-t-inline-crc64-for-gcc-5-compatability.patch lib_patch.Upstream
+package/bctoolbox/0001-Fix-Libs.private-flags-for-mbedtls.patch lib_patch.Upstream
 package/bcusdk/0002-eibd-fix-endless-recursion-when-using-USB-backends.patch lib_patch.Upstream
 package/bearssl/0001-Fix-missing-objdir-dependency.patch lib_patch.Upstream
 package/benejson/0001-c-std.patch lib_patch.Upstream
@@ -261,6 +344,7 @@ package/brickd/S70brickd Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/bridge-utils/0001-fix-build-on-musl.patch lib_patch.Upstream
 package/brltty/0001-Fix-linking-error-on-mips64el.patch lib_patch.Upstream
 package/brltty/S10brltty Shellcheck lib_sysv.Indent lib_sysv.Variables
+package/bsdiff/0001-Add-missing-header-for-u_char.patch lib_patch.Upstream
 package/bustle/0001-Makefile-fix-pcap-config-call.patch lib_patch.Upstream
 package/busybox/0001-networking-libiproute-use-linux-if_packet.h-instead-.patch lib_patch.Upstream
 package/busybox/0002-Makefile.flags-strip-non-l-arguments-returned-by-pkg.patch lib_patch.Upstream
@@ -284,7 +368,8 @@ package/cdrkit/0003-Add-extern-to-char-outfile-declaration-to-fix-build-.patch l
 package/cfm/S65cfm lib_sysv.Indent lib_sysv.Variables
 package/cgroupfs-mount/S30cgroupfs Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/chipmunk/0001-Fix-build-failure-on-musl.patch lib_patch.Upstream
-package/chrony/S49chronyd lib_sysv.Variables
+package/chocolate-doom/0001-Remove-redundant-demoextend-definition.patch lib_patch.Upstream
+package/chrony/S49chrony Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/cmake/0001-rename-cmake-rootfile.patch lib_patch.Upstream
 package/cmocka/0001-Don-t-redefine-uintptr_t.patch lib_patch.Upstream
 package/collectd/0001-src-netlink.c-remove-REG_NOERROR.patch lib_patch.Upstream
@@ -333,15 +418,24 @@ package/dhcp/S80dhcp-relay Shellcheck lib_sysv.Variables
 package/dhcp/S80dhcp-server Shellcheck lib_sysv.Variables
 package/dhcp/dhclient-script Shellcheck lib_shellscript.TrailingSpace
 package/dhcpcd/S41dhcpcd lib_sysv.Indent lib_sysv.Variables
+package/dht/0001-cmake.patch lib_patch.Upstream
 package/dillo/0001-usr-local-include.patch lib_patch.Upstream
 package/dillo/0002-Fix-openssl-detection.patch lib_patch.Upstream
 package/dillo/0004-fix-build-with-gcc-10.patch lib_patch.Upstream
+package/directfb-examples/0001-remove-bzero.patch lib_patch.Sob lib_patch.Upstream
+package/directfb/0001-fix-missing-davinci-voodoo-header.patch lib_patch.Upstream
+package/directfb/0002-imlib2-config.patch lib_patch.Upstream
+package/directfb/0003-setregion-lock.patch lib_patch.Upstream
+package/directfb/0004-use-gcc-link.patch lib_patch.Upstream
+package/directfb/0005-add-missing-idivine-header.patch lib_patch.Upstream
+package/directfb/0006-fix-client-gfx_state-initialisation.patch lib_patch.Upstream
 package/dmalloc/0001-configure-fix-build-on-mips.patch lib_patch.Upstream
 package/dmalloc/0003-configure-allow-overriding-some-tests.patch lib_patch.Upstream
 package/dmalloc/0004-Makefile-use-the-configure-detected-or-user-supplied.patch lib_patch.Upstream
 package/dmalloc/0005-configure-use-LD-instead-of-hard-coding-ld.patch lib_patch.Upstream
 package/dmraid/0001-fix-compilation-under-musl.patch lib_patch.Upstream
 package/dmraid/S20dmraid lib_sysv.Variables
+package/docker-engine/S60dockerd Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/docopt-cpp/0001-only-build-one-target-use-BUILD_SHARED_LIBS-where-appropriate.patch lib_patch.Upstream
 package/domoticz/S99domoticz Shellcheck
 package/dovecot/0001-auth-Fix-handling-passdbs-with-identical-driver-args.patch lib_patch.Upstream
@@ -366,13 +460,21 @@ package/efl/0001-ecore_evas-engines-drm-meson.build-use-gl_deps-as-en.patch lib_
 package/efl/0002-ecore_evas-engines-drm-meson.build-fix-gl_drm-includ.patch lib_patch.Upstream
 package/efl/0003-ecore_fb-fix-build-with-tslib.patch lib_patch.Upstream
 package/eigen/0001-Adds-new-CMake-Options-for-controlling-build-compone.patch lib_patch.Upstream
+package/ejabberd/0001-Makefile.in-do-not-download-or-compile-dependencies.patch lib_patch.Upstream
+package/ejabberd/0002-fix-ejabberdctl.patch lib_patch.Upstream
+package/ejabberd/0003-correct-includes.patch lib_patch.Upstream
+package/ejabberd/S50ejabberd Shellcheck lib_sysv.Indent lib_sysv.Variables
+package/ejabberd/check-erlang-lib Shellcheck
 package/elftosb/0001-fixes-includes.patch lib_patch.Upstream
 package/elftosb/0002-force-cxx-compiler.patch lib_patch.Upstream
 package/elfutils/0001-Add-a-enable-disable-progs-configure-option.patch lib_patch.Upstream
 package/elfutils/0002-Really-make-Werror-conditional-to-BUILD_WERROR.patch lib_patch.Upstream
+package/erlang-p1-sip/0001-correct-include.patch lib_patch.Upstream
+package/erlang-p1-xmpp/0001-fix-includes.patch lib_patch.Upstream
 package/erlang-rebar/0001-src-rebar_port_compiler-add-fPIC-to-LDFLAGS-by-defau.patch lib_patch.Upstream
 package/espeak/0001-Fix-build-of-shared-library-on-architectures-needing.patch lib_patch.Upstream
 package/espeak/0002-tr_languages-cast-string_ordinal-init-values.patch lib_patch.Upstream
+package/eudev/S10udev Shellcheck lib_sysv.ConsecutiveEmptyLines lib_sysv.Indent lib_sysv.Variables
 package/evemu/0001-Include-limits.h-for-PATH_MAX.patch lib_patch.Upstream
 package/evemu/0002-evemu-Update-struct-input_event.patch lib_patch.Upstream
 package/evemu/0003-src-evemu.c-fix-build-with-kernels-4.16.patch lib_patch.Upstream
@@ -392,6 +494,13 @@ package/fbterm/0001-fbio.cpp-improxy.cpp-fbterm.cpp-fix-musl-compile.patch lib_p
 package/fbterm/0002-mouse.cpp-fix-musl-compile.patch lib_patch.Upstream
 package/fbterm/0003-C++11-compliance.patch lib_patch.Upstream
 package/fbterm/0004-iconv.patch lib_patch.Upstream
+package/fbv/0001-cross.patch lib_patch.Sob lib_patch.Upstream
+package/fbv/0002-fix-24bpp-support-on-big-endian.patch lib_patch.Sob lib_patch.Upstream
+package/fbv/0003-fix-bgr555.patch lib_patch.Upstream
+package/fbv/0004-giflib.patch lib_patch.Upstream
+package/fbv/0005-include.patch lib_patch.Sob lib_patch.Upstream
+package/fbv/0006-libpng15.patch lib_patch.Upstream
+package/fbv/0007-gif.c-fic-build-with-gcc-10.patch lib_patch.Upstream
 package/fcgiwrap/0001-use-LIBS-from-configure.patch lib_patch.Upstream
 package/fcgiwrap/0002-link-with-libsystemd-instead-of-libsystemd-daemon.patch lib_patch.Upstream
 package/ffmpeg/0001-swscale-x86-yuv2rgb-Fix-build-without-SSSE3.patch lib_patch.Upstream
@@ -420,14 +529,23 @@ package/ftop/0001-overflow.patch lib_patch.Upstream
 package/fwts/0001-build-do-not-use-Werror.patch lib_patch.Upstream
 package/fxdiv/0001-CMake-don-t-enable-CXX-unless-building-tests-benchma.patch lib_patch.Upstream
 package/fxload/0001-fix-static-build.patch lib_patch.Upstream
-package/gcc/13.4.0/0001-disable-split-stack-for-non-thread-builds.patch lib_patch.Upstream
-package/gcc/14.3.0/0001-disable-split-stack-for-non-thread-builds.patch lib_patch.Upstream
-package/gcc/15.2.0/0001-disable-split-stack-for-non-thread-builds.patch lib_patch.Upstream
+package/gcc/12.4.0/0001-disable-split-stack-for-non-thread-builds.patch lib_patch.Upstream
+package/gcc/13.3.0/0001-disable-split-stack-for-non-thread-builds.patch lib_patch.Upstream
+package/gcc/14.2.0/0001-disable-split-stack-for-non-thread-builds.patch lib_patch.Upstream
 package/gcc/8.4.0/0001-xtensa-fix-PR-target-91880.patch lib_patch.Upstream
 package/gcc/8.4.0/0002-Revert-re-PR-target-92095-internal-error-with-O1-mcp.patch lib_patch.Upstream
 package/gcc/8.4.0/0003-libsanitizer-Remove-cyclades-from-libsanitizer.patch lib_patch.Upstream
 package/gcc/8.4.0/0004-disable-split-stack-for-non-thread-builds.patch lib_patch.Upstream
 package/gcr/0001-meson-Fix-unknown-kw-argument-in-gnome.generate_gir.patch lib_patch.Upstream
+package/gdb/13.2/0001-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch lib_patch.Upstream
+package/gdb/13.2/0002-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch lib_patch.Upstream
+package/gdb/13.2/0003-use-asm-sgidefs.h.patch lib_patch.Upstream
+package/gdb/13.2/0004-gdbserver-fix-build-for-m68k.patch lib_patch.Upstream
+package/gdb/13.2/0005-nat-fork-inferior-include-linux-ptrace.h.patch lib_patch.Upstream
+package/gdb/13.2/0006-Fix-getrandom-compile-for-uclibc-v1.0.35.patch lib_patch.Upstream
+package/gdb/13.2/0007-fix-musl-build-on-riscv.patch lib_patch.Upstream
+package/gdb/13.2/0008-gdbserver-Makefile.in-fix-NLS-build.patch lib_patch.Upstream
+package/gdb/13.2/0009-gdb-Fix-native-build-on-xtensa.patch lib_patch.Upstream
 package/gdb/14.2/0001-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch lib_patch.Upstream
 package/gdb/14.2/0002-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch lib_patch.Upstream
 package/gdb/14.2/0003-use-asm-sgidefs.h.patch lib_patch.Upstream
@@ -437,27 +555,20 @@ package/gdb/14.2/0006-Fix-getrandom-compile-for-uclibc-v1.0.35.patch lib_patch.U
 package/gdb/14.2/0007-fix-musl-build-on-riscv.patch lib_patch.Upstream
 package/gdb/14.2/0008-gdbserver-Makefile.in-fix-NLS-build.patch lib_patch.Upstream
 package/gdb/14.2/0009-gdb-Fix-native-build-on-xtensa.patch lib_patch.Upstream
-package/gdb/15.2/0001-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch lib_patch.Upstream
-package/gdb/15.2/0002-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch lib_patch.Upstream
-package/gdb/15.2/0003-use-asm-sgidefs.h.patch lib_patch.Upstream
-package/gdb/15.2/0004-gdbserver-fix-build-for-m68k.patch lib_patch.Upstream
-package/gdb/15.2/0005-nat-fork-inferior-include-linux-ptrace.h.patch lib_patch.Upstream
-package/gdb/15.2/0006-Fix-getrandom-compile-for-uclibc-v1.0.35.patch lib_patch.Upstream
-package/gdb/15.2/0007-fix-musl-build-on-riscv.patch lib_patch.Upstream
-package/gdb/15.2/0008-gdbserver-Makefile.in-fix-NLS-build.patch lib_patch.Upstream
-package/gdb/15.2/0009-gdb-Fix-native-build-on-xtensa.patch lib_patch.Upstream
-package/gdb/16.3/0001-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch lib_patch.Upstream
-package/gdb/16.3/0002-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch lib_patch.Upstream
-package/gdb/16.3/0003-use-asm-sgidefs.h.patch lib_patch.Upstream
-package/gdb/16.3/0004-gdbserver-fix-build-for-m68k.patch lib_patch.Upstream
-package/gdb/16.3/0005-nat-fork-inferior-include-linux-ptrace.h.patch lib_patch.Upstream
-package/gdb/16.3/0006-Fix-getrandom-compile-for-uclibc-v1.0.35.patch lib_patch.Upstream
-package/gdb/16.3/0007-fix-musl-build-on-riscv.patch lib_patch.Upstream
-package/gdb/16.3/0008-gdbserver-Makefile.in-fix-NLS-build.patch lib_patch.Upstream
-package/gdb/16.3/0009-gdb-Fix-native-build-on-xtensa.patch lib_patch.Upstream
+package/gdb/15.1/0001-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch lib_patch.Upstream
+package/gdb/15.1/0002-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch lib_patch.Upstream
+package/gdb/15.1/0003-use-asm-sgidefs.h.patch lib_patch.Upstream
+package/gdb/15.1/0004-gdbserver-fix-build-for-m68k.patch lib_patch.Upstream
+package/gdb/15.1/0005-nat-fork-inferior-include-linux-ptrace.h.patch lib_patch.Upstream
+package/gdb/15.1/0006-Fix-getrandom-compile-for-uclibc-v1.0.35.patch lib_patch.Upstream
+package/gdb/15.1/0007-fix-musl-build-on-riscv.patch lib_patch.Upstream
+package/gdb/15.1/0008-gdbserver-Makefile.in-fix-NLS-build.patch lib_patch.Upstream
+package/gdb/15.1/0009-gdb-Fix-native-build-on-xtensa.patch lib_patch.Upstream
 package/genpart/0001-fix-return-code.patch lib_patch.Upstream
+package/genromfs/0001-build-system.patch lib_patch.Sob lib_patch.Upstream
 package/gensio/0001-Fix-missing-EVP_PKEY_ED25519-build-error-on-libressl.patch lib_patch.Upstream
 package/gerbera/S99gerbera lib_sysv.Indent
+package/giblib/0001-fix-imlib2-detection.patch lib_patch.Upstream
 package/git-crypt/0001-fix-build-with-libressl-3.5.0.patch lib_patch.Upstream
 package/glorytun/0001-Add-support-for-Apple-silicon.patch lib_patch.Upstream
 package/glorytun/0002-aegis256.c-fix-aarch64-build-with-uclibc.patch lib_patch.Upstream
@@ -466,23 +577,30 @@ package/gnupg/0001-build-Always-use-EXTERN_UNLESS_MAIN_MODULE-pattern.patch lib_
 package/gnuplot/0001-configure-add-without-demo-option.patch lib_patch.Upstream
 package/go/go-src/0001-build.go-explicit-option-for-crosscompilation.patch lib_patch.Upstream
 package/gob2/0001-dont-include-from-prefix.patch lib_patch.Upstream
-package/gobject-introspection/0001-Add-rpath-links-to-ccompiler.patch lib_patch.Upstream
+package/gobject-introspection/0001-disable-tests.patch lib_patch.Upstream
+package/gobject-introspection/0002-Add-rpath-links-to-ccompiler.patch lib_patch.Upstream
+package/gobject-introspection/0003-giscanner-ignore-error-return-codes-from-ldd-wrapper.patch lib_patch.Upstream
 package/gpsd/S50gpsd Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/gptfdisk/0001-gptcurses-partially-revert-Tweaks-for-building-on-th.patch lib_patch.Upstream
 package/graphite2/0001-don-t-install-a-libtool-file-with-static-library.patch lib_patch.Upstream
-package/grpc/0003-disable-unconditionally-downloading-api-repos.patch lib_patch.Upstream
+package/grpc/0002-wrap_memcpy.cc-add-GPR_DISABLE_WRAPPED_MEMCPY.patch lib_patch.Upstream
+package/grpc/0004-disable-unconditionally-downloading-api-repos.patch lib_patch.Upstream
 package/gstreamer1/gstd/0001-Don-t-require-gstd-check-user-xenv.sh-for-systemd-se.patch lib_patch.Upstream
 package/guile/0001-calculate-csqrt_manually.patch lib_patch.Upstream
 package/guile/0002-Makefile.am-fix-build-without-makeinfo.patch lib_patch.Upstream
 package/gumbo-parser/0001-configure.ac-fix-build-without-C.patch lib_patch.Upstream
 package/gutenprint/0001-use-pregen-xmli18n-header.patch lib_patch.Upstream
 package/gutenprint/0002-cups-support-replaces-static-with-static-libtool-lib.patch lib_patch.Upstream
+package/gvfs/0001-build-Remove-incorrect-i18n.merge_file-argument.patch lib_patch.Upstream
 package/harfbuzz/0001-meson.build-check-for-pthread.h.patch lib_patch.Upstream
 package/haserl/0001-add-haserl_lualib.inc.patch lib_patch.Upstream
 package/haveged/S21haveged Shellcheck lib_sysv.Variables
 package/heirloom-mailx/0001-fix-libressl-support.patch lib_patch.Upstream
 package/hplip/0001-build-use-pkg-config-to-discover-libusb.patch lib_patch.Upstream
 package/hplip/0002-configure.in-fix-AM_INIT_AUTOMAKE-call.patch lib_patch.Upstream
+package/htpdate/S43htpdate Shellcheck
+package/httping/0001-fix-math-library-linking.patch lib_patch.Upstream
+package/httping/0002-Makefile-allow-build-without-gettext.patch lib_patch.Upstream
 package/i2pd/S99i2pd Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/i7z/0001-fix-build-with-gcc-10.patch lib_patch.Upstream
 package/ibm-sw-tpm2/0001-Use-LONG_BIT-to-define-RADIX_BITS.patch lib_patch.Upstream
@@ -522,6 +640,7 @@ package/ipmitool/0002-Fix-enterprise-numbers-URL.patch lib_patch.Upstream
 package/ipmitool/0003-Do-not-require-the-IANA-PEN-registry-file.patch lib_patch.Upstream
 package/ipmitool/0004-configure.ac-allow-disabling-registry-downloads.patch lib_patch.Upstream
 package/iprutils/0001-configure.ac-add-AC_USE_SYSTEM_EXTENSIONS.patch lib_patch.Upstream
+package/iptables/S35iptables Shellcheck
 package/irda-utils/0001-daemon.patch lib_patch.Sob lib_patch.Upstream
 package/irda-utils/0002-nommu.patch lib_patch.Sob lib_patch.Upstream
 package/irda-utils/0003-subdir.patch lib_patch.Sob lib_patch.Upstream
@@ -530,13 +649,16 @@ package/irqbalance/S13irqbalance Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/irrlicht/0001-override-CPPFLAGS-CXXFLAGS-and-CFLAGS-in-Makefile.patch lib_patch.Upstream
 package/irrlicht/0002-makefile-override-LDFLAGS-and-remove-obsolete-X11R6-.patch lib_patch.Upstream
 package/iucode-tool/S00iucode-tool lib_sysv.Variables
-package/iwd/S40iwd Shellcheck
+package/iwd/S40iwd Shellcheck lib_sysv.Variables
 package/janus-gateway/0001-disable-ssp.patch lib_patch.Upstream
+package/jose/0001-lib-hsh.c-rename-hsh-local-variable.patch lib_patch.Upstream
+package/jose/0002-man-add-option-to-skip-building-man-pages.patch lib_patch.Upstream
 package/kexec-lite/0001-clean-restart.patch lib_patch.Upstream
 package/keyutils/0001-fix-install-rule.patch lib_patch.Upstream
 package/keyutils/0002-cifs.patch lib_patch.Sob lib_patch.Upstream
 package/kmod/0001-fix-O_CLOEXEC.patch lib_patch.Upstream
 package/kodi/S50kodi Shellcheck lib_sysv.Variables
+package/latencytop/0001-makefile.patch lib_patch.Upstream
 package/lbase64/0001-retro-compatible-with-Lua-5.1.patch lib_patch.Upstream
 package/lcdproc/0001-LCDd.conf.patch lib_patch.Upstream
 package/lcdproc/0002-Add-missing-ioctl-header.patch lib_patch.Upstream
@@ -556,6 +678,7 @@ package/libavl/0001-fix-makefile.patch lib_patch.Upstream
 package/libb64/0001-Integer-overflows.patch lib_patch.Upstream
 package/libb64/0002-Initialize-C++-objects.patch lib_patch.Upstream
 package/libcdaudio/0001-libcdaudio-enable-autoreconf.patch lib_patch.Upstream
+package/libcec/0001-cecloader-h-fix-null-return.patch lib_patch.Upstream
 package/libcgi/0001-CMakeLists.txt-honour-BUILD_TESTING.patch lib_patch.Upstream
 package/libcgicc/0001-disable-documentation-option.patch lib_patch.Sob lib_patch.Upstream
 package/libconfuse/0001-Fix-163-unterminated-username-used-with-getpwnam.patch lib_patch.Upstream
@@ -568,6 +691,8 @@ package/libdvbcsa/0001-altivec-powerpc64.patch lib_patch.Upstream
 package/libeXosip2/0001-src-eXtl_dtls.c-fix-build-with-libressl-3.4.1.patch lib_patch.Upstream
 package/libedit/0001-check-bsd-functions-in-libbsd.patch lib_patch.Upstream
 package/libevent/0001-Don-t-define-BIO_get_init-for-LibreSSL-3-5.patch lib_patch.Upstream
+package/libfcgi/0001-link-against-math.patch lib_patch.Upstream
+package/libfcgi/0002-disable-examples.patch lib_patch.Upstream
 package/libffi/0001-Fix-use-of-compact-eh-frames-on-MIPS.patch lib_patch.Upstream
 package/libfm/0001-modules-fix-cross-compilation.patch lib_patch.Upstream
 package/libfreeimage/0001-no-root-install.patch lib_patch.Upstream
@@ -576,14 +701,23 @@ package/libfreeimage/0003-fix-big-endian-os.patch lib_patch.Upstream
 package/libfreeimage/0004-fixed-C-11-warnings.patch lib_patch.Upstream
 package/libftdi/0001-pkgconfig_libusb.patch lib_patch.Sob lib_patch.Upstream
 package/libftdi/0002-libftdi.pc-requires-libusb-fix-static-build.patch lib_patch.Sob lib_patch.Upstream
+package/libftdi1/0001-cmake-use-the-standard-CMake-flag-to-drive-the-share.patch lib_patch.Upstream
+package/libftdi1/0002-CMakeLists.txt-fix-paths-when-FTDIPP-is-set.patch lib_patch.Upstream
+package/libftdi1/0003-CMakeLists.txt-fix-static-build-with-libusb-and-lato.patch lib_patch.Upstream
 package/libfuse/0001-fix-aarch64-build.patch lib_patch.Upstream
 package/libfuse/0002-util-ulockmgr_server-c-conditionally-define-closefrom-fix-glibc-2-34.patch lib_patch.Upstream
 package/libgcrypt/0001-configure.ac-add-an-option-to-disable-tests.patch lib_patch.Upstream
+package/libglfw/0001-Wayland-Remove-extra-cmake-modules-dependency.patch lib_patch.Upstream
 package/libgpiod/0001-build-add-a-configure-switch-for-building-examples.patch lib_patch.Upstream
 package/libgsm/0001-Misc-fixes-from-Archlinux.patch lib_patch.Upstream
 package/libgtk2/0001-reduce-dependencies.patch lib_patch.Upstream
 package/libgtk3/0001-Remove-Gdk-dependency-from-gtk-encode-symbolic-svg.patch lib_patch.Upstream
 package/libhdhomerun/0001-dont-strip.patch lib_patch.Upstream
+package/libhid/0001-dont-fiddle-with-debug-flags.patch lib_patch.Upstream
+package/libhid/0002-no-newline-in-ldflags.patch lib_patch.Upstream
+package/libhid/0003-uclinux.patch lib_patch.Upstream
+package/libical/0001-no-tests.patch lib_patch.Upstream
+package/libical/0002-icaltypes-c-icalreqstattype_from_string-copy-the-reqstattype.patch lib_patch.Upstream
 package/libiio/S99iiod Shellcheck lib_sysv.Variables
 package/libiqrf/0001-cmake-handle-static-library-and-find-required-thread.patch lib_patch.Upstream
 package/libiqrf/0002-use-only-c-language.patch lib_patch.Upstream
@@ -601,7 +735,8 @@ package/libloki/0002-use-ln-snf.patch lib_patch.Upstream
 package/libmad/0001-mips-h-constraint-removal.patch lib_patch.Sob lib_patch.Upstream
 package/libmad/0002-configure-ac-automake-foreign.patch lib_patch.Upstream
 package/libmng/0001-jpeg-9a.patch lib_patch.Upstream
-package/libmodsecurity/0001-modsecurity.pc.in-add-lstdc.patch lib_patch.Upstream
+package/libmodsecurity/0001-configure.ac-drop-usage-of-git-at-configure-time.patch lib_patch.Upstream
+package/libmodsecurity/0002-modsecurity.pc.in-add-lstdc.patch lib_patch.Upstream
 package/libmpeg2/0001-altivec.patch lib_patch.Upstream
 package/libmpeg2/0002-armv4l.patch lib_patch.Upstream
 package/libmpeg2/0003-fix-arm-detection.patch lib_patch.Upstream
@@ -610,6 +745,7 @@ package/libnetfilter_conntrack/0001-conntrack-fix-build-with-kernel-5-15-and-mus
 package/libnfc/0001-autotools-make-example-build-optional.patch lib_patch.Upstream
 package/libnids/0001-libpcap-use-pkg-config.patch lib_patch.Upstream
 package/libnss/0001-Bug-1801182-Allow-overriding-OS_ARCH-OS_TEST-and-OS_.patch lib_patch.Upstream
+package/liboauth/0001-Fixes-build-issue-with-OpenSSL-1.1.0.patch lib_patch.Upstream
 package/libodb-mysql/0001-fix-syntax-issue-while-checking-ldflags.patch lib_patch.Upstream
 package/libodb-mysql/0002-mariadb-FTBFS-fix.patch lib_patch.Upstream
 package/libopenssl/0001-Reproducible-build-do-not-leak-compiler-path.patch lib_patch.Upstream
@@ -620,14 +756,17 @@ package/liboping/0003-Fix-compile-break-with-GCC-7-buffer-overflow-with-snprintf
 package/liboping/0004-Fix-compile-error-on-GCC-7.patch lib_patch.Upstream
 package/liboping/0005-src-oping.c-always-use-s-style-format-for-printf-sty.patch lib_patch.Upstream
 package/libp11/0001-src-p11_attr.c-fix-build-with-gcc-4.8.patch lib_patch.Upstream
+package/libplatform/0001-cmake-require-c-11-as-the-minimum-standard.patch lib_patch.Upstream
 package/libpthsem/0001-fix-build-on-linux-3.x-host.patch lib_patch.Upstream
 package/libressl/0001-always-expose-SSL_OP_NO_TLSv1_3.patch lib_patch.Upstream
+package/libroxml/0001-src-roxml_mem.h-add-missing-extern.patch lib_patch.Upstream
 package/librsvg/0001-gdk-pixbuf-loader-Makefile.am-set-GDK_PIXBUF_MODULED.patch lib_patch.Upstream
 package/librtlsdr/0001-Makefile.am-respect-DESTDIR-with-install-udev-rules.patch lib_patch.Upstream
 package/libselinux/0001-Do-not-use-PYCEXT-and-rely-on-the-installed-file-nam.patch lib_patch.Upstream
 package/libsepol/0001-support-static-only.patch lib_patch.Upstream
 package/libserial/0001-SerialPort.cpp-fix-build-when-size_t-is-an-unsigned-.patch lib_patch.Upstream
 package/libserial/0002-SerialPort.cpp-don-t-use-high-baudrates-when-not-ava.patch lib_patch.Upstream
+package/libserialport/0001-uclinux-detection.patch lib_patch.Upstream
 package/libshdata/0001-backend-Add-missing-include-files.patch lib_patch.Upstream
 package/libshdata/0002-examples-stress_test-Fix-build-with-musl-libc.patch lib_patch.Upstream
 package/libsidplay2/0001-sidplay2-libs-2.1.1.patch lib_patch.Upstream
@@ -637,11 +776,17 @@ package/libsigrok/0001-Support-glibmm-2.68.patch lib_patch.Upstream
 package/libsigrokdecode/0001-configure-ac-Add-support-for-Python-3-9.patch lib_patch.Upstream
 package/libsigrokdecode/0002-configure-Add-python-3-10-support.patch lib_patch.Upstream
 package/libsigrokdecode/0003-configure-ac-Use-python3-embed-pc-as-a-fallback.patch lib_patch.Upstream
+package/libsoup/0001-meson.build-set-c_std-to-gnu99.patch lib_patch.Upstream
+package/libsoxr/0001-Add-Libs.private-for-static-linking.patch lib_patch.Upstream
 package/libspatialindex/0001-allow-building-static-libs.patch lib_patch.Upstream
 package/libspatialindex/0002-CMakeLists.txt-fix-CMAKE_BUILD_TYPE.patch lib_patch.Upstream
 package/libsquish/0001-Makefile-add-f-option-for-ln-to-remove-existing-dest.patch lib_patch.Upstream
 package/libsvg/0001-fix-expat-static-declaration.patch lib_patch.Upstream
 package/libsvg/0002-Fix-undefined-symbol-png_set_gray_1_2_4_to_8.patch lib_patch.Upstream
+package/libsvgtiny/0001-disable-debug-printfs.patch lib_patch.Upstream
+package/libsvgtiny/0002-Remove-Werror.patch lib_patch.Upstream
+package/libsvgtiny/0003-Hopefully-silence-warnings-about-inlines-and-non-inlines-calling-one.patch lib_patch.Upstream
+package/libsvgtiny/0004-Build-Include-gperf-generated-code-directly.patch lib_patch.Upstream
 package/libtalloc/0001-buildtools-wafsamba-add-disable-stack-protector-opti.patch lib_patch.Upstream
 package/libtelnet/0001-fix-compilation-without-zlib.patch lib_patch.Upstream
 package/libtheora/0001-link-libtheoradec.patch lib_patch.Upstream
@@ -649,14 +794,23 @@ package/libtomcrypt/0001-fix-CVE-2019-17362.patch lib_patch.Upstream
 package/libtommath/0001-Build-test-bn_mp_set_double-c-on-more-platforms.patch lib_patch.Upstream
 package/libtorrent/0001-libtorrent.pc.in-add-Libs.Private.patch lib_patch.Upstream
 package/libubootenv/0001-src-CMakeLists.txt-do-not-force-the-build-of-a-share.patch lib_patch.Upstream
+package/libuhttpd/0001-add-compatibility-for-wolfssl-5-0.patch lib_patch.Upstream
 package/libuio/0001-configure.ac-set-automake-strictness-to-foreign.patch lib_patch.Upstream
 package/liburcu/0001-Only-blacklist-ARM-gcc-4.8.0-and-4.8.1.patch lib_patch.Upstream
 package/libvpx/0001-vpx_mem-vpx_mem.h-Fix-compilation-with-uClibc.patch lib_patch.Upstream
+package/libwebsock/0001-Switch-to-use-pkg-config-to-detect-libevent-and-open.patch lib_patch.Upstream
+package/libwebsock/0002-fix-ssl.patch lib_patch.Upstream
+package/libwebsock/0003-fix-incorrect-inline.patch lib_patch.Upstream
 package/libyuv/0001-i386-sse2.patch lib_patch.Upstream
 package/lighttpd/0001-Modify-the-default-lighttpd-configuration-file-to-ha.patch lib_patch.Upstream
 package/lighttpd/S50lighttpd Shellcheck lib_sysv.EmptyLastLine lib_sysv.Indent lib_sysv.Variables
 package/linknx/0001-configure-ac-tweak-CPPUNIT-conditional.patch lib_patch.Upstream
 package/linknx/0002-src-Makefile.am-fix-linking-with-log4cpp.patch lib_patch.Upstream
+package/linphone/0001-src-core-paths-paths.cpp-fix-powerpc-build.patch lib_patch.Upstream
+package/linux-fusion/0001-fix-for-linux-4-and-above.patch lib_patch.Upstream
+package/linux-fusion/0002-Fix-mismatched-conversion-spec-and-value-in-printk.patch lib_patch.Upstream
+package/linux-fusion/0003-Fix-fusion-Unknown-symbol-tasklist_lock-err-0.patch lib_patch.Upstream
+package/linux-fusion/0004-Port-one-one_udp.c-to-Linux-4.1.patch lib_patch.Upstream
 package/linux-zigbee/0001-test-serial-Remove-test-serial.patch lib_patch.Upstream
 package/linux-zigbee/0002-addrdb-coord-config-parse.y-add-missing-time.h-inclu.patch lib_patch.Upstream
 package/linuxptp/S65ptp4l Shellcheck lib_sysv.Indent
@@ -664,8 +818,13 @@ package/linuxptp/S66phc2sys Shellcheck lib_sysv.Indent
 package/lirc-tools/0001-plugins-devinput.c-fix-build-with-musl-1.2.0.patch lib_patch.Upstream
 package/lirc-tools/0002-configure-add-disable-doc-option.patch lib_patch.Upstream
 package/lirc-tools/S25lircd lib_sysv.Indent lib_sysv.Variables
+package/lite/0001-dfbspy-stat.patch lib_patch.Sob lib_patch.Upstream
+package/lite/0002-no-tests.patch lib_patch.Sob lib_patch.Upstream
+package/lite/0003-pkg-config.patch lib_patch.Sob lib_patch.Upstream
 package/live555/0001-Add-a-pkg-config-file-for-the-shared-libraries.patch lib_patch.Upstream
 package/lldpd/S60lldpd Shellcheck lib_sysv.Indent lib_sysv.Variables
+package/llvm-project/clang/0001-lib-Driver-ToolChains-Gnu-Use-GCC_INSTALL_PREFIX-in-.patch lib_patch.Upstream
+package/llvm-project/libclc/0001-support-out-of-tree-build.patch lib_patch.Upstream
 package/lm-sensors/0001-static-build.patch lib_patch.Upstream
 package/lm-sensors/0002-no-host-ldconfig.patch lib_patch.Upstream
 package/lmbench/0001-scripts-build-use-bin-bash-as-shell.patch lib_patch.Upstream
@@ -695,6 +854,7 @@ package/lugaru/0001-ImageIO-fix-invalid-conversion.patch lib_patch.Upstream
 package/lugaru/0002-Fix-mismatched-usage-length-build-fail-on-g.patch lib_patch.Upstream
 package/lvm2/0001-cmdline-use-freopen-to-reopen-standard-streams.patch lib_patch.Upstream
 package/lvm2/0002-log-use-freopen-to-reopen-standard-streams.patch lib_patch.Upstream
+package/lz4/0001-build-Support-BUILD_SHARED-no.patch lib_patch.Upstream
 package/lzma/0001-Remove-static-from-LDFLAGS.patch lib_patch.Upstream
 package/lzop/0001-allow-overriding-modification-time.patch lib_patch.Upstream
 package/macchanger/0001-Fix-missing-include-for-caddr_t.patch lib_patch.Upstream
@@ -713,10 +873,13 @@ package/matchbox-panel/0003-mb-applet-battery.patch lib_patch.Upstream
 package/matchbox-startup-monitor/0001-true-false.patch lib_patch.Upstream
 package/matchbox/0001-defaulttheme.patch lib_patch.Upstream
 package/matchbox/0002-src-Fix-build-with-gcc-10.patch lib_patch.Upstream
+package/mediastreamer/0001-src-videofilters-nowebcam.c-fix-build-without-ffmpeg.patch lib_patch.Upstream
+package/mediastreamer/0002-Use-AV_INPUT_BUFFER_PADDING_SIZE-to-determine-paddin.patch lib_patch.Upstream
 package/memstat/0001-PATH_MAX.patch lib_patch.Upstream
 package/mender-connect/S43mender-connect Shellcheck
 package/menu-cache/0001-Support-gcc10-compilation.patch lib_patch.Upstream
 package/mesa3d-demos/0001-demos-makes-opengl-an-optional-component.patch lib_patch.Upstream
+package/mesa3d/0001-meson-Set-proper-value-for-LIBCLC_INCLUDEDIR.patch lib_patch.Upstream
 package/meson-tools/0001-amlbootenc-gxl-remove-non-std-C-convention-in-for.patch lib_patch.Upstream
 package/meson/0001-Prefer-ext-static-libs-when-default-library-static.patch lib_patch.Upstream
 package/meson/0002-mesonbuild-dependencies-base.py-add-pkg_config_stati.patch lib_patch.Upstream
@@ -725,17 +888,25 @@ package/metacity/0002-gconf.patch lib_patch.Upstream
 package/metacity/0003-mag-add-libm-reference.patch lib_patch.Upstream
 package/mfgtools/0001-lnx_def.h-fix-conflicting-declaration-of-__time64_t.patch lib_patch.Upstream
 package/mii-diag/0001-strchr.patch lib_patch.Sob lib_patch.Upstream
+package/mimic/0001-Fix-linking-on-gcc-10.2.0-or-newer.patch lib_patch.Upstream
 package/mini-snmpd/0001-linux.c-fix-musl-build.patch lib_patch.Upstream
 package/minidlna/S60minidlnad Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/minissdpd/S50minissdpd Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/modem-manager/S44modem-manager Shellcheck lib_sysv.Variables
-package/monit/0001-Do-not-force-building-a-statically-linked-binary.patch lib_patch.Upstream
+package/mongodb/0001-ssl_manager.cpp-fix-build-with-gcc-7-and-fpermissive.patch lib_patch.Upstream
+package/mongodb/0002-src-mongo-db-exec-plan_stats.h-fix-build-with-gcc-11.patch lib_patch.Upstream
+package/mongrel2/0001-Do-not-run-tests.patch lib_patch.Upstream
+package/mongrel2/0002-Fix-Makefiles-for-cross-compilation.patch lib_patch.Upstream
+package/monit/0001-no-force-static.patch lib_patch.Upstream
 package/mono-gtksharp3/0001-Fixes-MONO_PROFILE_ENTER_LEAVE-undeclared.patch lib_patch.Upstream
 package/mono-gtksharp3/0002-Mono-compilation-error-branch.patch lib_patch.Upstream
 package/mono/0001-Fix-linkage-with-a-system-libatomic_ops-shared-library.patch lib_patch.Upstream
 package/mono/0002-Ongoing-work-on-the-cmake-build.patch lib_patch.Upstream
+package/mosquitto/S50mosquitto Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/motion/S99motion Shellcheck lib_sysv.Indent lib_sysv.Variables
+package/mpd/0001-src-event-meson.build-add-atomic-dependency-for-spar.patch lib_patch.Upstream
 package/mpir/0001-mpn-arm-udiv.asm-workaround-binutils-bug-14887.patch lib_patch.Upstream
+package/mpv/0001-fix-powerpc64-altivec.patch lib_patch.Upstream
 package/mraa/0001-include-Declare-gVERSION-global-as-extern.patch lib_patch.Upstream
 package/mrouted/S41mrouted NotExecutable
 package/mrp/S65mrp lib_sysv.Indent lib_sysv.Variables
@@ -756,12 +927,14 @@ package/neard/S53neard Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/neardal/0001-lib-neardal.h-fix-build-with-gcc-10.patch lib_patch.Upstream
 package/netatalk/S50netatalk lib_sysv.EmptyLastLine lib_sysv.Indent lib_sysv.Variables
 package/netcat/0001-signed-bit-counting.patch lib_patch.Sob lib_patch.Upstream
+package/netopeer2/S52netopeer2 Shellcheck lib_sysv.Variables
 package/netperf/0001-src-nettest_omni.c-fix-compilation-with-GCC10.patch lib_patch.Upstream
 package/netplug/0001-makefile-flags.patch lib_patch.Sob lib_patch.Upstream
 package/netplug/0002-add-missing-time-include.patch lib_patch.Upstream
 package/netplug/0003-remove-assert-fail.patch lib_patch.Upstream
 package/netplug/S29netplug Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/netplug/netplug-script Shellcheck lib_shellscript.ConsecutiveEmptyLines
+package/netsniff-ng/0001-Detect-libpcap-dependencies-using-pkg-config.patch lib_patch.Upstream
 package/netsnmp/S59snmpd Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/netsurf/0001-avoid-system-perl-dependencies.patch lib_patch.Upstream
 package/netsurf/0002-do-not-cross-compile-nsgenbind.patch lib_patch.Upstream
@@ -790,11 +963,14 @@ package/norm/0001-protolib-drop-linux-version-check.patch lib_patch.Upstream
 package/norm/0002-Use-print-as-function-call-for-Python3-compatibility.patch lib_patch.Upstream
 package/norm/0003-Fix-mixed-tabs-spaces-in-protolib-wscript.patch lib_patch.Upstream
 package/nss-pam-ldapd/S45nslcd Shellcheck lib_sysv.EmptyLastLine lib_sysv.Indent lib_sysv.Variables
+package/ntp/0001-ntp-syscalls-fallback.patch lib_patch.Upstream
 package/ntp/S49ntp.in lib_sysv.Variables
 package/ntpsec/0001-wscript-remove-checks-for-bsd-string.h-fixes-host-co.patch lib_patch.Upstream
+package/numactl/0001-link-with-latomic-if-needed-again.patch lib_patch.Upstream
 package/nuttcp/0001-susv3-legacy.patch lib_patch.Upstream
 package/nvidia-driver/0001-use-LDFLAGS.patch lib_patch.Upstream
 package/octave/0001-Fix-BLAS-library-integer-size-detection.patch lib_patch.Upstream
+package/ofono/0001-uclibc-backtrace.patch lib_patch.Upstream
 package/ofono/S46ofono lib_sysv.Variables
 package/ola/0001-ola-fix-compilation-with-musl-1-2-3.patch lib_patch.Upstream
 package/olsr/0001-olsrd-migrate-to-using-bison-3.7.1.patch lib_patch.Upstream
@@ -876,7 +1052,9 @@ package/pifmrds/0003-Makefile-fix-static-link.patch lib_patch.Upstream
 package/pigpio/S50pigpio Shellcheck lib_sysv.Variables
 package/pistache/0001-src-common-transport.cc-fallback-value-for-RUSAGE_TH.patch lib_patch.Upstream
 package/pistache/0002-src-server-listener.cc-fix-libressl-build.patch lib_patch.Upstream
+package/pixman/0001-Disable-tests.patch lib_patch.Upstream
 package/pkgconf/0001-Only-prefix-with-the-sysroot-a-subset-of-variables.patch lib_patch.Upstream
+package/pkgconf/0002-Revert-main-assume-modversion-insted-of-version-if-o.patch lib_patch.Upstream
 package/pkgconf/pkg-config.in Shellcheck
 package/poke/0001-configure.ac-HELP2MAN-replace-by-true-when-cross-com.patch lib_patch.Upstream
 package/policycoreutils/0001-Add-DESTDIR-to-all-paths-that-use-an-absolute-path.patch lib_patch.Upstream
@@ -886,11 +1064,13 @@ package/pptp-linux/0001-susv3-legacy.patch lib_patch.Upstream
 package/pptp-linux/0002-fix-parallel-build.patch lib_patch.Upstream
 package/prboom/0001-libpng-1.4.patch lib_patch.Upstream
 package/prboom/0002-configure-remove-predefined-O2-optimization-flag.patch lib_patch.Upstream
+package/prelink-cross/0001-src-rtld-dl-tls.c-Fix-TLS-offsets-computation-for-s3.patch lib_patch.Upstream
 package/procps-ng/S02sysctl lib_sysv.Variables
 package/proftpd/S50proftpd Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/prosody/0001-enable-syslog.patch lib_patch.Upstream
 package/prosody/0002-add-pidfile.patch lib_patch.Upstream
 package/prosody/S50prosody Shellcheck lib_sysv.Indent lib_sysv.Variables
+package/protozero/0001-CMakeLists.txt-protobuf-is-only-needed-for-tests.patch lib_patch.Upstream
 package/proxychains-ng/0001-add-configure-check-for-non-POSIX-compliant-getnameinfo-signature.patch lib_patch.Upstream
 package/ptpd/S65ptpd Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/ptpd2/0001-musl.patch lib_patch.Upstream
@@ -901,6 +1081,9 @@ package/pulseaudio/0001-shm.c-use-_Static_assert-instead-of-static_assert-fo.pat
 package/pulseaudio/S50pulseaudio lib_sysv.ConsecutiveEmptyLines lib_sysv.EmptyLastLine lib_sysv.Indent lib_sysv.Variables
 package/pulseview/0001-Replace-obsolete-deprecated-Qt-methods.patch lib_patch.Upstream
 package/pulseview/0002-Fix-broken-build-due-to-C-template-behind-C-linkage.patch lib_patch.Upstream
+package/python-aiohttp-remotes/0001-Fix-flit_core-build-requires-backend.patch lib_patch.Upstream
+package/python-automat/0001-Remove-uneeded-dependency-to-wheel.patch lib_patch.Upstream
+package/python-daphne/0001-remove-pytest-runner-requirement.patch lib_patch.Upstream
 package/python-pybind/0001-pybind11-commands.py-support-STAGING_DIR.patch lib_patch.Upstream
 package/python-pylibftdi/0001-do-not-use-find-library.patch lib_patch.Upstream
 package/python-pyqt5/0001-configure-skip-qtdetail.patch lib_patch.Upstream
@@ -911,6 +1094,18 @@ package/python-scipy/0001-build-sh4-FE.patch lib_patch.Upstream
 package/python-setuptools/0001-add-executable.patch lib_patch.Upstream
 package/python-sip/0001-remove-join-from-sip-h-files-string.patch lib_patch.Upstream
 package/python-web2py/S51web2py Shellcheck lib_sysv.Variables
+package/python-ws4py/0001-Adjust-ws4py-for-Python-3.7-syntax.patch lib_patch.Upstream
+package/python3/0001-Make-the-build-of-pyc-files-conditional.patch lib_patch.Upstream
+package/python3/0002-Disable-buggy_getaddrinfo-configure-test-when-cross-.patch lib_patch.Upstream
+package/python3/0003-Add-an-option-to-disable-pydoc.patch lib_patch.Upstream
+package/python3/0004-Add-an-option-to-disable-lib2to3.patch lib_patch.Upstream
+package/python3/0005-Add-an-option-to-disable-IDLE.patch lib_patch.Upstream
+package/python3/0006-configure.ac-move-PY_STDLIB_MOD_SET_NA-further-up.patch lib_patch.Upstream
+package/python3/0007-Add-option-to-disable-the-sqlite3-module.patch lib_patch.Upstream
+package/python3/0008-Add-an-option-to-disable-the-tk-module.patch lib_patch.Upstream
+package/python3/0009-Add-an-option-to-disable-the-curses-module.patch lib_patch.Upstream
+package/python3/0010-Add-an-option-to-disable-expat.patch lib_patch.Upstream
+package/python3/0011-configure.ac-fixup-CC-print-multiarch-output-for-mus.patch lib_patch.Upstream
 package/qextserialport/0001-Create-a-main-include-file-QExtSerialPort.patch lib_patch.Upstream
 package/qextserialport/0002-Tell-qmake-to-add-a-pkgconfig-file-to-ease-usage-wit.patch lib_patch.Upstream
 package/qt5/qt5base/0001-qtbase-Fix-build-error-when-using-EGL.patch lib_patch.Upstream
@@ -938,11 +1133,16 @@ package/qt5/qt5webkit/0004-Remove-invalid-g_object-declarations-to-fix-build-wi.
 package/qt5/qt5webkit/0005-Add-support-for-ARC-processors.patch lib_patch.Upstream
 package/qt5/qt5webkit/0006-Warnings-due-to-AppSinkCallbacks-struct-growth-https.patch lib_patch.Upstream
 package/qt5cinex/0001-Fix-execution-problem-with-Qt5.3.patch lib_patch.Upstream
+package/quagga/0001-fix-ipctl-forwarding.patch lib_patch.Upstream
+package/quagga/0002-lib-prefix.h-fix-build-with-gcc-10.patch lib_patch.Upstream
+package/quagga/0003-Fix-build-with-gcc-10.patch lib_patch.Upstream
 package/racehound/0001-Fix-module-install-path-lib-instead-of-usr-lib-prefi.patch lib_patch.Upstream
 package/rapidxml/0001-ensure-internal-print-operations-are-declared-before.patch lib_patch.Upstream
+package/raspberrypi-usbboot/0001-Makefile-allow-passing-CFLAGS-LDFLAGS.patch lib_patch.Upstream
 package/read-edid/0001-Fix-install-file-list.patch lib_patch.Upstream
 package/read-edid/0002-Fix-compiler-check.patch lib_patch.Upstream
 package/read-edid/0003-fix-build-with-gcc-10.patch lib_patch.Upstream
+package/readline/0001-curses-link.patch lib_patch.Upstream
 package/redis/0001-uclibc.patch lib_patch.Upstream
 package/redis/0002-largefile-conditional-define.patch lib_patch.Upstream
 package/redis/0003-redis.conf-adjust-defauts-for-buildroot.patch lib_patch.Upstream
@@ -952,6 +1152,7 @@ package/ripgrep/0001-puts-jemalloc-allocator-behind-a-cargo-feature-flag.patch l
 package/riscv-isa-sim/0001-riscv-disable-precompiled-headers.patch lib_patch.Upstream
 package/rng-tools/S21rngd Shellcheck lib_sysv.Variables
 package/rocksdb/0001-build_tools-build_detect_platform-fix-C-tests.patch lib_patch.Upstream
+package/rp-pppoe/0001-src-pppoe.h-fix-build-with-musl-libc.patch lib_patch.Upstream
 package/rpcbind/0001-Remove-yellow-pages-support.patch lib_patch.Upstream
 package/rpcbind/S30rpcbind lib_sysv.EmptyLastLine lib_sysv.Indent lib_sysv.Variables
 package/rpi-userland/0001-Add-.pc-files-for-the-OpenGLESv2-EGL-and-bcm_host-li.patch lib_patch.Upstream
@@ -972,11 +1173,17 @@ package/samba4/0001-build-find-pre-built-heimdal-build-tools-in-case-of-.patch l
 package/samba4/0002-ldap_message_test.c-include-stdint.h-before-cmoka.h.patch lib_patch.Upstream
 package/samba4/S91smb Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/sane-backends/0001-sane_backend-add-missing-config.h.patch lib_patch.Upstream
-package/screen/0001-Do-not-create-backup-of-old-installed-binary.patch lib_patch.Upstream
-package/screen/0002-Change-binary-permission-flags-even-if-chown-fails.patch lib_patch.Upstream
-package/screen/0003-Support-overriding-SCREEN-to-get-a-non-versioned-bin.patch lib_patch.Upstream
-package/screen/0004-Renamed-sched.h-to-eventqueue.h.patch lib_patch.Upstream
+package/screen/0001-Do-not-use-memcpy-as-an-alternative-for-bcopy-memmov.patch lib_patch.Upstream
+package/screen/0002-Do-not-create-backup-of-old-installed-binary.patch lib_patch.Upstream
+package/screen/0003-Change-binary-permission-flags-even-if-chown-fails.patch lib_patch.Upstream
+package/screen/0004-Support-overriding-SCREEN-to-get-a-non-versioned-bin.patch lib_patch.Upstream
+package/screen/0005-Renamed-sched.h-to-eventqueue.h.patch lib_patch.Upstream
+package/screen/0006-comm.h-now-depends-on-term.h.patch lib_patch.Upstream
+package/screen/0007-comm.h-needed-for-list_-display-generic-.o.patch lib_patch.Upstream
 package/scrub/0001-configure-ac-make-sure-m4-macros-are-included-in-the-build.patch lib_patch.Upstream
+package/sdl/0001-use-correct-directfb-config.patch lib_patch.Upstream
+package/sdl/0002-fix-compilation-with-libx11.patch lib_patch.Upstream
+package/sdl/0003-SDL_x11yuv.c-fix-possible-use-after-free.patch lib_patch.Upstream
 package/sdl_mixer/0001-Add-Libs.private-field-to-pkg-config-file.patch lib_patch.Upstream
 package/sdl_mixer/0002-configure__set_macro_directory.patch lib_patch.Upstream
 package/sdl_mixer/0003-configure.ac-fix-static-linking-with-tremor.patch lib_patch.Upstream
@@ -989,6 +1196,7 @@ package/sentry-native/0001-sentry.h-include-ucontext.h.patch lib_patch.Upstream
 package/ser2net/S50ser2net Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/setools/0001-Do-not-export-use-setools.InfoFlowAnalysis-and-setoo.patch lib_patch.Upstream
 package/setserial/0001-build-system-fix.patch lib_patch.Upstream
+package/setserial/0002-tiocghayesesp-build-fix.patch lib_patch.Upstream
 package/shadowsocks-libev/0001-configure.ac-use-pkg-config-to-find-netfilter_conntr.patch lib_patch.Upstream
 package/shadowsocks-libev/0002-fix-maybe-uninitialized-errors.patch lib_patch.Upstream
 package/shadowsocks-libev/0003-lib-Makefile.am-remove-static-from-LDFLAGS.patch lib_patch.Upstream
@@ -1010,6 +1218,7 @@ package/snort/0005-fix-sparc.patch lib_patch.Upstream
 package/snort/0006-Fix-compile-error-when-building-against-uclibc-or-mu.patch lib_patch.Upstream
 package/snort/0007-Fix-error-when-building-on-a-Fedora-host-machine.patch lib_patch.Upstream
 package/snort/0008-Fix-NO-OPTIMIZE.patch lib_patch.Upstream
+package/socketcand/0001-Fix-GCC10-build-failure.patch lib_patch.Upstream
 package/softether/0001-Create-autotools-plumbing-for-SoftEther.patch lib_patch.Upstream
 package/softether/0002-Create-libsoftether.so-and-dynamically-link.patch lib_patch.Upstream
 package/softether/0003-use-fhs-install-directories.patch lib_patch.Upstream
@@ -1044,6 +1253,7 @@ package/suricata/0001-configure.ac-allow-the-user-to-override-RUST_TARGET.patch
 package/suricata/S99suricata Shellcheck
 package/swupdate/swupdate.sh Shellcheck
 package/sylpheed/0001-harden-link-checker-before-accepting-click.patch lib_patch.Upstream
+package/sysrepo/S51sysrepo-plugind Shellcheck lib_sysv.Indent
 package/sysvinit/0001-Makefile-disable-stack-protector-strong.patch lib_patch.Upstream
 package/tar/0001-lib-getrandom.c-fix-build-with-uclibc-1.0.35.patch lib_patch.Upstream
 package/targetcli-fb/S50target Shellcheck lib_sysv.Variables
@@ -1065,6 +1275,7 @@ package/tinycbor/0001-Makefile-add-DISABLE_WERROR.patch lib_patch.Upstream
 package/tinycompress/0001-wave-add-time.h-missing-header-inclusion.patch lib_patch.Upstream
 package/tinydtls/0001-sha2-sha2.c-fix-build-on-big-endian.patch lib_patch.Upstream
 package/tinyxml/0001-In-stamp-always-advance-the-pointer-if-p-0xef.patch lib_patch.Upstream
+package/tpm2-abrmd/S80tpm2-abrmd Shellcheck lib_sysv.Indent lib_sysv.Variables
 package/tpm2-tss/0001-Temporary-fix-for-build-without-C.patch lib_patch.Upstream
 package/transmission/S92transmission Shellcheck lib_sysv.ConsecutiveEmptyLines lib_sysv.Indent lib_sysv.Variables
 package/triggerhappy/S10triggerhappy Shellcheck lib_sysv.Indent lib_sysv.Variables
@@ -1086,6 +1297,7 @@ package/uemacs/01-clear-ixon-termios-flag.patch lib_patch.Upstream
 package/uhd/0001-host-CMakeLists-add-boost-unit_test_framework-requir.patch lib_patch.Upstream
 package/uhttpd/0001-Remove-Werror.patch lib_patch.Upstream
 package/uhttpd/0002-Fix-TCP_FASTOPEN-related-compile-error.patch lib_patch.Upstream
+package/umtprd/0001-Fix-output_dir-make-dependency.patch lib_patch.Upstream
 package/unbound/S70unbound Shellcheck
 package/unifdef/0001-Makefile-fix-error-on-install.patch lib_patch.Upstream
 package/unscd/S46unscd Shellcheck lib_sysv.Indent lib_sysv.Variables
@@ -1136,12 +1348,15 @@ package/vte/0002-build-Fix-check-for-fstack-protector-compiler-support.patch lib
 package/vtun/0001-fix-installation.patch lib_patch.Upstream
 package/vtun/0002-fix-ssl-headers-checks.patch lib_patch.Upstream
 package/vtun/0003-openssl11.patch lib_patch.Upstream
+package/w_scan/0001-musl.patch lib_patch.Upstream
+package/w_scan/0002-si_types-h-fix-build-with-gcc-10.patch lib_patch.Upstream
 package/waffle/0001-cmake-forward-cflags-from-.pc-files-to-waffle-cflags.patch lib_patch.Upstream
 package/waffle/0002-wayland-fix-build-against-version-1-20.patch lib_patch.Upstream
 package/waffle/0003-drop-C-dependency.patch lib_patch.Upstream
 package/wampcc/0001-Add-RISC-V-endian-detection.patch lib_patch.Upstream
 package/wampcc/0002-include-wampcc-platform.h-fix-build-with-musl-1.2.0.patch lib_patch.Upstream
 package/wampcc/0003-Broken-build-on-Windows.patch lib_patch.Upstream
+package/watchdogd/S01watchdogd NotExecutable lib_sysv.Indent
 package/wget/0001-lib-getrandom.c-fix-build-with-uclibc-1.0.35.patch lib_patch.Upstream
 package/wilc-driver/0001-cfg80211.c-fix-missing-prandom_u32-with-Linux-6.1.0.patch lib_patch.Upstream
 package/wilc-driver/0002-spi.c-fix-build-failure-on-remove-callback.patch lib_patch.Upstream
@@ -1150,6 +1365,7 @@ package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.pa
 package/wilc-driver/0005-Fix-cast-warnings.patch lib_patch.Upstream
 package/wipe/0001-musl.patch lib_patch.Upstream
 package/wireless_tools/0001-remove-bzero.patch lib_patch.Upstream
+package/wireshark/0001-cmake-lemon-wipe-CMAKE_-EXE_LINKER_FLAGS-SYSROOT-if-.patch lib_patch.Upstream
 package/woff2/0001-CMake-Handle-multiple-libraries-being-returned-for-B.patch lib_patch.Upstream
 package/wpa_supplicant/ifupdown.sh Shellcheck
 package/x11r7/xapp_luit/0001-posix-openpt.patch lib_patch.Upstream
@@ -1180,6 +1396,9 @@ package/xen/0001-9pfs-include-linux-limits.h-for-XATTR_SIZE_MAX.patch lib_patch.
 package/xen/0002-Fix-build-with-64-bits-time_t.patch lib_patch.Upstream
 package/xen/0003-libs-light-fix-tv_sec-printf-format.patch lib_patch.Upstream
 package/xen/0004-libs-light-fix-tv_sec-fprintf-format.patch lib_patch.Upstream
+package/xenomai/3.0.10/0001-lib-boilerplate-iniparser-Allow-building-with-GCC-10-2-2020101.patch lib_patch.Upstream
+package/xenomai/3.0.10/0002-Add-disable-demo-testsuite-options.patch lib_patch.Upstream
+package/xenomai/3.0.10/0003-lib-cobalt-copperplate-Use-valid-addresses-for-pthread_setspecific.patch lib_patch.Upstream
 package/xinetd/0001-ar.patch lib_patch.Upstream
 package/xinetd/0002-destdir.patch lib_patch.Upstream
 package/xinetd/0003-rpc-fix.patch lib_patch.Upstream

.defconfig

@@ -12,6 +12,7 @@ BR2_i386=y
 # BR2_m68k is not set
 # BR2_mips is not set
 # BR2_mipsel is not set
+# BR2_nios2 is not set
 # BR2_powerpc is not set
 # BR2_sh is not set
 # BR2_sparc is not set

.gitlab-ci.yml

@@ -1,7 +1,7 @@
 # Configuration for Gitlab-CI.
 # Builds appear on https://gitlab.com/buildroot.org/buildroot/pipelines
 
-image: $CI_REGISTRY/buildroot.org/buildroot/base:20250218.2110
+image: $CI_REGISTRY/buildroot.org/buildroot/base:20230207.1123
 
 stages:
   - generate-gitlab-ci

Config.in

@@ -6,15 +6,6 @@ config BR2_HAVE_DOT_CONFIG
 	bool
 	default y
 
-# Hidden symbol kept to false, to temporarily mark a configuration
-# known to be broken (by depending on it). Ideally, we don't want to
-# keep broken parts for too long. The intended use of this symbol is
-# to give some time to a developer to fix the feature. Features marked
-# as broken will be removed if they are not fixed in a reasonable
-# amount of time.
-config BR2_BROKEN
-	bool
-
 config BR2_VERSION
 	string
 	option env="BR2_VERSION_FULL"
@@ -74,26 +65,6 @@ config BR2_HOST_GCC_AT_LEAST_11
 	default y if BR2_HOST_GCC_VERSION = "11"
 	select BR2_HOST_GCC_AT_LEAST_10
 
-config BR2_HOST_GCC_AT_LEAST_12
-	bool
-	default y if BR2_HOST_GCC_VERSION = "12"
-	select BR2_HOST_GCC_AT_LEAST_11
-
-config BR2_HOST_GCC_AT_LEAST_13
-	bool
-	default y if BR2_HOST_GCC_VERSION = "13"
-	select BR2_HOST_GCC_AT_LEAST_12
-
-config BR2_HOST_GCC_AT_LEAST_14
-	bool
-	default y if BR2_HOST_GCC_VERSION = "14"
-	select BR2_HOST_GCC_AT_LEAST_13
-
-config BR2_HOST_GCC_AT_LEAST_15
-	bool
-	default y if BR2_HOST_GCC_VERSION = "15"
-	select BR2_HOST_GCC_AT_LEAST_14
-
 # When adding new entries above, be sure to update
 # the HOSTCC_MAX_VERSION variable in the Makefile.
 
@@ -134,15 +105,15 @@ menu "Commands"
 
 config BR2_CURL
 	string "Curl command"
-	default "curl -q --ftp-pasv --retry 3 --connect-timeout 10"
+	default "curl -q --ftp-pasv --retry 3"
 
 config BR2_WGET
 	string "Wget command"
-	default "wget -nd -t 3 --connect-timeout=10"
+	default "wget -nd -t 3"
 
 config BR2_SVN
 	string "Subversion (svn) command"
-	default "svn --non-interactive --config-option servers:global:http-timeout=10"
+	default "svn --non-interactive"
 
 config BR2_BZR
 	string "Bazaar (bzr) command"
@@ -162,11 +133,11 @@ config BR2_LOCALFILES
 
 config BR2_SCP
 	string "Secure copy (scp) command"
-	default "scp -o ConnectTimeout=10"
+	default "scp"
 
 config BR2_SFTP
 	string "Secure file transfer (sftp) command"
-	default "sftp -o ConnectTimeout=10"
+	default "sftp"
 
 config BR2_HG
 	string "Mercurial (hg) command"
@@ -314,7 +285,7 @@ config BR2_KERNEL_MIRROR
 
 config BR2_GNU_MIRROR
 	string "GNU Software mirror"
-	default "https://ftpmirror.gnu.org"
+	default "http://ftpmirror.gnu.org"
 	help
 	  GNU has multiple software mirrors scattered around the
 	  world. The following allows you to select your preferred
@@ -828,6 +799,8 @@ config BR2_PIC_PIE_ARCH_SUPPORTS
 	default y
 	# Microblaze glibc toolchains don't work with PIC/PIE enabled
 	depends on !BR2_microblaze
+	# Nios2 toolchains produce non working binaries with -fPIC
+	depends on !BR2_nios2
 
 config BR2_PIC_PIE
 	bool "Build code with PIC/PIE"

Config.in.legacy

@@ -144,532 +144,6 @@ endif
 
 ###############################################################################
 
-comment "Legacy options removed in 2025.08.3"
-
-config BR2_PACKAGE_MONGREL2
-	bool "mongrel2 has been removed"
-	select BR2_LEGACY
-	help
-	  mongrel2 is incompatible with MbedTLS 3.6 and has been removed
-
-config BR2_PACKAGE_BCTOOLBOX
-	bool "bctoolbox has been removed"
-	select BR2_LEGACY
-	help
-	  This package has been removed as part of the linphone
-	  removal. In addition, newer version of linphone directly
-	  bundle bctoolbox making a separate package unnecessary.
-
-config BR2_PACKAGE_ORTP
-	bool "ortp has been removed"
-	select BR2_LEGACY
-	help
-	  This package has been removed as part of the linphone
-	  removal. In addition, newer version of linphone directly
-	  bundle ortp making a separate package unnecessary.
-
-config BR2_PACKAGE_MEDIASTREAMER
-	bool "mediastreamer has been removed"
-	select BR2_LEGACY
-	help
-	  This package has been removed as part of the linphone
-	  removal. In addition, newer version of linphone directly
-	  bundle mediastreamer making a separate package unnecessary.
-
-config BR2_PACKAGE_BELR
-	bool "belr has been removed"
-	select BR2_LEGACY
-	help
-	  This package has been removed as part of the linphone
-	  removal. In addition, newer version of linphone directly
-	  bundle belr making a separate package unnecessary.
-
-config BR2_PACKAGE_BELLE_SIP
-	bool "belle-sip has been removed"
-	select BR2_LEGACY
-	help
-	  This package has been removed as part of the linphone
-	  removal. In addition, newer version of linphone directly
-	  bundle belle-sip making a separate package unnecessary.
-
-config BR2_PACKAGE_LINPHONE
-	bool "linphone has been removed"
-	select BR2_LEGACY
-	help
-	  This package was no longer maintained in Buildroot and was
-	  no longer building. It can be re-added if someone volunteers
-	  to fix the issues, update the package and maintain it.
-
-comment "Legacy options removed in 2025.08.2"
-
-config BR2_PACKAGE_RAMSPEED
-	bool "ramspeed has been removed"
-	select BR2_LEGACY
-	help
-	  The ramspeed package was removed as it is not maintained
-	  anymore and the upstream repo is gone.
-
-comment "Legacy options removed in 2025.08"
-
-config BR2_PACKAGE_NETSTAT_NAT
-	bool "netstat-nat has been removed"
-	select BR2_LEGACY
-	help
-	  The upstream URL is gone and netstat-nat has been removed
-	  from Buildroot.
-
-config BR2_PACKAGE_LIGHTTPD_LIBEV
-	bool "lighttpd removed libev support"
-	select BR2_LEGACY
-	help
-	  Lighttpd 1.4.80 removed optional libev support.
-
-config BR2_PACKAGE_LIBSVGTINY
-	bool "libsvgtiny has been removed"
-	select BR2_LEGACY
-	help
-	  Libsvgtiny has been removed from Buildroot.
-
-config BR2_PACKAGE_THTTPD
-	bool "thttpd has been removed"
-	select BR2_LEGACY
-	help
-	  thttpd is no longer maintained actively by upstream and has
-	  been removed from Buildroot.
-
-config BR2_KERNEL_HEADERS_6_15
-	bool "kernel headers version 6.15.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 6.15.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_PACKAGE_LIBCURL_BEARSSL
-	bool "libcurl removed BearSSL support"
-	select BR2_LEGACY
-	help
-	  Libcurl removed optional BearSSL support.
-
-config BR2_PACKAGE_LIBOLM
-	bool "libolm has been removed"
-	select BR2_LEGACY
-	help
-	  libolm is deprecated and has been removed from Buildroot.
-	  https://gitlab.matrix.org/matrix-org/olm#important-libolm-is-now-deprecated
-
-config BR2_PACKAGE_LIBWEBSOCK
-	bool "libwebsock has been removed"
-	select BR2_LEGACY
-	help
-	  The upstream Github repository payden/libwebsock is no
-	  longer available, and has been removed from Buildroot.
-
-config BR2_TARGET_EDK2_PLATFORM_SOCIONEXT_DEVELOPERBOX
-	bool "EDK2 Socionext DeveloperBox support has been removed"
-	select BR2_LEGACY
-	help
-	  The Socionext DeveloperBox support has been removed upstream
-	  in EDK2 version edk2-stable202505.
-
-config BR2_PACKAGE_LIBEBUR128
-	bool "libebur128 has been removed"
-	select BR2_LEGACY
-	help
-	  The libebur128 package has been removed from Buildroot.
-
-config BR2_KERNEL_HEADERS_6_14
-	bool "kernel headers version 6.14.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 6.14.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_PACKAGE_GPSD_OCEANSERVER
-	bool "gpsd OceanServer removed upstream"
-	select BR2_LEGACY
-	help
-	  Support for OceanServer has been removed upstream in gpsd
-	  v3.26.
-
-config BR2_PACKAGE_MESA3D_OSMESA_GALLIUM
-	bool "mesa3d OSMesa (Gallium) library support removed"
-	select BR2_LEGACY
-	help
-	  Mesa3d removed the OSMesa (Off-Screen) interface library.
-
-config BR2_PACKAGE_ALSA_LIB_ALISP
-	bool "alsa-lib alisp support removed"
-	select BR2_LEGACY
-	help
-	  Support for alisp was removed from alsa-lib v1.12.14.
-
-comment "Legacy options removed in 2025.05"
-
-config BR2_GCC_VERSION_12_X
-	bool "gcc 12.x support removed"
-	select BR2_LEGACY
-	help
-	  Support for building a toolchain based on GCC 12.x has been
-	  removed, chose a newer GCC version instead.
-
-config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SWRAST
-	bool "mesa Gallium swrast driver was replaced by softpipe"
-	select BR2_LEGACY
-	select BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SOFTPIPE
-	help
-	  The Gallium swrast driver was replaced by softpipe.
-
-config BR2_PACKAGE_MBEDTLS_COMPRESSION
-	bool "mbedtls compression support removed"
-	select BR2_LEGACY
-	help
-	  MbedTLS has dropped support for TLS record-level
-	  compression.
-
-config BR2_KERNEL_HEADERS_6_13
-	bool "kernel headers version 6.13.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 6.13.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_PACKAGE_MPD_SOUNDCLOUD
-	bool "mpd soundcloud support has been removed"
-	select BR2_LEGACY
-	help
-	  MPD SoundCloud support has been removed.
-
-# BR2_PACKAGE_DOCKER_ENGINE_DOCKER_INIT is still referenced in docker-engine
-config BR2_PACKAGE_DOCKER_ENGINE_DOCKER_INIT
-	bool "docker-engine init support is now a choice"
-	select BR2_LEGACY
-	help
-	  docker-engine init support is now a choice. The original
-	  setting has been adapted; be sure to review it in the
-	  docker-engine package.
-
-comment "Legacy options removed in 2025.02"
-
-config BR2_PACKAGE_SQLITE_ENABLE_JSON1
-	bool "Enable the JSON extensions for SQLite has been removed"
-	select BR2_LEGACY
-	help
-	  Since SQLite 3.38 the JSON Extension is enabled by default.
-
-config BR2_PACKAGE_ANGULARJS
-	bool "angularjs has been removed"
-	select BR2_LEGACY
-	help
-	  The angularjs package was removed as the upstream
-	  project has been archived.
-
-config BR2_PACKAGE_ANGULAR_WEBSOCKET
-	bool "angular-websocket has been removed"
-	select BR2_LEGACY
-	help
-	  The angular-websocket package was removed as the upstream
-	  project has been archived.
-
-config BR2_PACKAGE_LATENCYTOP
-	bool "latencytop has been removed"
-	select BR2_LEGACY
-	help
-	  The latencytop package is no longer available for download.
-
-config BR2_PACKAGE_OBSIDIAN_CURSORS
-	bool "obsidian-cursors has been removed"
-	select BR2_LEGACY
-	help
-	  The obsidian cursors package is no longer available for
-	  direct download.
-
-config BR2_PACKAGE_W_SCAN
-	bool "w_scan has been removed"
-	select BR2_LEGACY
-	help
-	  The w_scan package was removed as it is not maintained
-	  anymore and the upstream URL is gone.
-
-config BR2_PACKAGE_GENROMFS
-	bool "genromfs"
-	select BR2_LEGACY
-	help
-	  Romfs root filesystem support has been removed.
-
-config BR2_TARGET_ROOTFS_ROMFS
-	bool "romfs root filesystem has been removed"
-	select BR2_LEGACY
-	help
-	  Romfs root filesystem support has been removed.
-
-config BR2_BINUTILS_VERSION_2_41_X
-	bool "binutils 2.41 has been removed"
-	select BR2_LEGACY
-	help
-	  binutils 2.41 has been removed, use a newer version.
-
-config BR2_TARGET_ROOTFS_EXT2_2r0
-	bool "ext2 rev0 support been removed"
-	select BR2_LEGACY
-	help
-	  Support for ext2 revision 0 format has been removed and
-	  revision 1 is now unconditionally used.
-
-config BR2_GDB_VERSION_13
-	bool "gdb 13.x has been removed"
-	select BR2_LEGACY
-	help
-	  GDB 13.x support has been removed, a newer version should be
-	  used instead.
-
-config BR2_nios2
-	bool "nios2 architecture removed"
-	select BR2_LEGACY
-	help
-	  The nios2 architecture was removed, by lack of toolchain
-	  support.
-
-config BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_NIOS2_GLIBC_BLEEDING_EDGE
-	bool "Bootlin nios2 glibc bleeding-edge toolchain removed"
-	select BR2_LEGACY
-	help
-	  The nios2 Bootlin toolchains have been removed.
-
-config BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_NIOS2_GLIBC_STABLE
-	bool "Bootlin nios2 glibc stable toolchain removed"
-	select BR2_LEGACY
-	help
-	  The nios2 Bootlin toolchains have been removed.
-
-config BR2_PACKAGE_DIRECTFB
-	bool "directfb has been removed"
-	select BR2_LEGACY
-	help
-	  This package was no longer maintained upstream, so it was
-	  dropped from Buildroot.
-
-config BR2_PACKAGE_GST_OMX
-	bool "gst-omx has been removed"
-	select BR2_LEGACY
-	help
-	  The gst-omx module has been removed from Gstreamer in
-	  release 1.24 in favor of Video4Linux-based video encoders.
-
-config BR2_PACKAGE_MIMIC
-	bool "mimic has been removed"
-	select BR2_LEGACY
-	help
-	  The mimic package has been removed from Buildroot.
-
-config BR2_PACKAGE_SDL2_DIRECTFB
-	bool "sdl2 directfb support removed"
-	select BR2_LEGACY
-	help
-	  The directfb support from SDL2 is no longer available, as
-	  directfb is no longer packaged in Buildroot.
-
-config BR2_PACKAGE_SDL_DIRECTFB
-	bool "sdl directfb support removed"
-	select BR2_LEGACY
-	help
-	  The directfb support from SDL is no longer available, as
-	  directfb is no longer packaged in Buildroot.
-
-config BR2_PACKAGE_QT5BASE_DIRECTFB
-	bool "qt5base directfb support removed"
-	select BR2_LEGACY
-	help
-	  The directfb support from qt5base is no longer available, as
-	  directfb is no longer packaged in Buildroot.
-
-config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_DIRECTFB
-	bool "gstreamer directfb plugin removed"
-	select BR2_LEGACY
-	help
-	  The directfb plugin from GStreamer is no longer supported,
-	  as directfb is no longer packaged in Buildroot.
-
-config BR2_PACKAGE_LITE
-	bool "lite has been removed"
-	select BR2_LEGACY
-	help
-	  This package was no longer maintained upstream, so it was
-	  dropped from Buildroot.
-
-config BR2_PACKAGE_LINUX_FUSION
-	bool "linux-fusion has been removed"
-	select BR2_LEGACY
-	help
-	  This package was no longer maintained upstream, so it was
-	  dropped from Buildroot.
-
-config BR2_PACKAGE_DIRECTFB_EXAMPLES
-	bool "directfb-examples has been removed"
-	select BR2_LEGACY
-	help
-	  This package was no longer maintained upstream, so it was
-	  dropped from Buildroot.
-
-config BR2_PACKAGE_HIAWATHA
-	bool "hiwatha has been removed"
-	select BR2_LEGACY
-	help
-	  This package is no longer maintained upstream, has no bug
-	  tracker, and the latest versions cause build
-	  failures. Therefore, it has been removed.
-
-config BR2_PACKAGE_MONGODB
-	bool "mongodb has been removed"
-	select BR2_LEGACY
-	help
-	  The mongodb package has been removed as it was unmaintained.
-
-config BR2_PACKAGE_PYTHON_M2CRYPTO
-	bool "python-m2crypto has been removed"
-	select BR2_LEGACY
-	help
-	  The python-m2crypto package was removed as it is in maintained
-	  only mode and is not recommended for new projects.
-
-config BR2_KERNEL_HEADERS_4_19
-	bool "kernel headers version 4.19.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 4.19.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_KERNEL_HEADERS_6_11
-	bool "kernel headers version 6.11.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 6.11.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_PACKAGE_GIBLIB
-	bool "giblib has been removed"
-	select BR2_LEGACY
-	help
-	  The giblib package was removed as it is not maintained
-	  anymore and the upstream URL is gone.
-
-config BR2_PACKAGE_FCONFIG
-	bool "fconfig has been removed"
-	select BR2_LEGACY
-	help
-	  The fconfig package was removed as it is not maintained
-	  anymore and the upstream URL is gone.
-
-config BR2_PACKAGE_LIBHID
-	bool "libhid has been removed"
-	select BR2_LEGACY
-	help
-	  The libhid package was removed as it is not maintained
-	  anymore and the upstream URL is gone. Consider using hidapi
-	  instead.
-
-config BR2_PACKAGE_QUAGGA
-	bool "quagga has been removed"
-	select BR2_LEGACY
-	help
-	  The quagga package was removed as it is not maintained
-	  anymore and the upstream repo is gone.
-
-config BR2_PACKAGE_RAMSMP
-	bool "ramsmp has been removed"
-	select BR2_LEGACY
-	help
-	  The ramsmp package was removed as it is not maintained
-	  anymore and the upstream repo is gone.
-
-comment "Legacy options removed in 2024.11"
-
-config BR2_PACKAGE_BSDIFF
-	bool "bsdiff has been removed"
-	select BR2_LEGACY
-	help
-	  The bsdiff package was removed as it is not maintained
-	  anymore (no commit since 2014).
-
-config BR2_PACKAGE_PROCPS_NS_ORIGINAL_TOP
-	bool "BR2_PACKAGE_PROCPS_NS_ORIGINAL_TOP has been renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_PROCPS_NG_ORIGINAL_TOP
-	help
-	  The option has been renamed to
-	  BR2_PACKAGE_PROCPS_NG_ORIGINAL_TOP.
-
-config BR2_PACKAGE_QEMU_TARGET_NIOS2
-	bool "qemu nios2 support has been removed"
-	select BR2_LEGACY
-	help
-	  NIOS2 support has been removed since Qemu 9.1.0.
-
-config BR2_PACKAGE_POPPERJS
-	bool "popperjs has been removed"
-	select BR2_LEGACY
-	help
-	  The project has been renamed to floating-ui.
-
-config BR2_KERNEL_HEADERS_6_10
-	bool "kernel headers version 6.10.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 6.10.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_PACKAGE_IPMITOOL_PEN_REG_URI
-	string "IANA PEN registry moved to iana-assignment package"
-	help
-	  Installation of the IANA PEN is now handled by the
-	  iana-assignment package; to install a custom PEN,
-	  use a rootfs-overlay for example.
-
-config BR2_PACKAGE_IPMITOOL_PEN_REG_URI_WRAP
-	bool
-	default y if BR2_PACKAGE_IPMITOOL_PEN_REG_URI != ""
-	select BR2_LEGACY
-
-config BR2_PACKAGE_ERLANG_P1_YAML
-	bool "erlang-p1-yaml has been renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_ERLANG_FAST_YAML
-	help
-	  The erlang-p1-yaml package has been renamed to
-	  erlang-fast-yaml.
-
-config BR2_PACKAGE_ERLANG_P1_XMPP
-	bool "erlang-p1-xmpp has been renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_ERLANG_XMPP
-	help
-	  The erlang-p1-xmpp package has been renamed to erlang-xmpp.
-
-config BR2_PACKAGE_ERLANG_P1_XML
-	bool "erlang-p1-xml has been renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_ERLANG_FAST_XML
-	help
-	  The erlang-p1-xml package has been renamed to erlang-fast-xml.
-
-config BR2_PACKAGE_ERLANG_P1_STUN
-	bool "erlang-p1-stun has been renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_ERLANG_STUN
-	help
-	  The erlang-p1-stun package has been renamed to erlang-stun.
-
-config BR2_PACKAGE_FBV_GIF
-	bool "fbv GIF support has been removed"
-	select BR2_LEGACY
-	help
-	  Fbv GIF support has been removed, use PNG, BMP or JPEG.
-
-config BR2_BINUTILS_VERSION_2_40_X
-	bool "binutils 2.40 has been removed"
-	select BR2_LEGACY
-	help
-	  binutils 2.40 has been removed, use a newer version.
-
 comment "Legacy options removed in 2024.08"
 
 config BR2_PACKAGE_MIDORI
@@ -6144,6 +5618,7 @@ config BR2_PACKAGE_KOBS_NG
 config BR2_PACKAGE_SAWMAN
 	bool "sawman package removed"
 	select BR2_LEGACY
+	select BR2_PACKAGE_DIRECTFB_SAWMAN
 	help
 	  This option has been removed because the sawman package no
 	  longer exists: it was merged inside DirectFB itself. This
@@ -6153,6 +5628,7 @@ config BR2_PACKAGE_SAWMAN
 config BR2_PACKAGE_DIVINE
 	bool "divine package removed"
 	select BR2_LEGACY
+	select BR2_PACKAGE_DIRECTFB_DIVINE
 	help
 	  This option has been removed because the divine package no
 	  longer exists: it was merged inside DirectFB itself. This

Makefile

@@ -92,9 +92,9 @@ all:
 .PHONY: all
 
 # Set and export the version string
-export BR2_VERSION := 2025.08.3
+export BR2_VERSION := 2024.08.3
 # Actual time the release is cut (for reproducible builds)
-BR2_VERSION_EPOCH = 1765441500
+BR2_VERSION_EPOCH = 1733673000
 
 # Save running make version since it's clobbered by the make package
 RUNNING_MAKE_VERSION := $(MAKE_VERSION)
@@ -353,7 +353,7 @@ export HOSTARCH := $(shell LC_ALL=C $(HOSTCC_NOCCACHE) -v 2>&1 | \
 
 # When adding a new host gcc version in Config.in,
 # update the HOSTCC_MAX_VERSION variable:
-HOSTCC_MAX_VERSION := 15
+HOSTCC_MAX_VERSION := 11
 
 HOSTCC_VERSION := $(shell V=$$($(HOSTCC_NOCCACHE) --version | \
 	sed -n -r 's/^.* ([0-9]*)\.([0-9]*)\.([0-9]*)[ ]*.*/\1 \2/p'); \
@@ -407,28 +407,27 @@ ifeq ($(BR2_HAVE_DOT_CONFIG),y)
 # Hide troublesome environment variables from sub processes
 #
 ################################################################################
-unexport AR
+unexport CROSS_COMPILE
 unexport ARCH
 unexport CC
-unexport CFLAGS
-unexport CONFIG_SITE
-unexport CPP
-unexport CROSS_COMPILE
-unexport CXX
-unexport CXXFLAGS
-unexport DEVICE_TREE
-unexport GCC_COLORS
-unexport GREP_OPTIONS
 unexport LD
+unexport AR
+unexport CXX
+unexport CPP
+unexport RANLIB
+unexport CFLAGS
+unexport CXXFLAGS
+unexport GREP_OPTIONS
+unexport TAR_OPTIONS
+unexport CONFIG_SITE
+unexport QMAKESPEC
+unexport TERMINFO
 unexport MACHINE
 unexport O
-unexport OS
+unexport GCC_COLORS
 unexport PLATFORM
-unexport QMAKESPEC
-unexport RANLIB
-unexport TAR_OPTIONS
-unexport TERMINFO
-unexport TOPDIR
+unexport OS
+unexport DEVICE_TREE
 
 GNU_HOST_NAME := $(shell support/gnuconfig/config.guess)
 
@@ -1219,17 +1218,17 @@ help:
 # $(2): br2-external name, empty for bundled
 define list-defconfigs
 	@first=true; \
-	for defconfig in $$([ -d $(1)/configs ] && find $(1)/configs -name '*_defconfig' |sort); do \
+	for defconfig in $(1)/configs/*_defconfig; do \
 		[ -f "$${defconfig}" ] || continue; \
 		if $${first}; then \
 			if [ "$(2)" ]; then \
-				printf 'External configs in "%s":\n' "$(call qstrip,$(2))"; \
+				printf 'External configs in "$(call qstrip,$(2))":\n'; \
 			else \
 				printf "Built-in configs:\n"; \
 			fi; \
 			first=false; \
 		fi; \
-		defconfig="$${defconfig#$(1)/configs/}"; \
+		defconfig="$${defconfig##*/}"; \
 		printf "  %-35s - Build for %s\n" "$${defconfig}" "$${defconfig%_defconfig}"; \
 	done; \
 	$${first} || printf "\n"
@@ -1250,12 +1249,10 @@ release: OUT = buildroot-$(BR2_VERSION)
 # documentation to the git output
 release:
 	git archive --format=tar --prefix=$(OUT)/ HEAD > $(OUT).tar
-	SOURCE_DATE_EPOCH=$$(git log -1 --format=%at 2> /dev/null) \
-		$(MAKE) O=$(OUT) manual-html manual-text manual-pdf
+	$(MAKE) O=$(OUT) manual-html manual-text manual-pdf
 	$(MAKE) O=$(OUT) distclean
-	tar rf $(OUT).tar --owner=0 --group=0 \
-		--mtime="$$(git log -1 --pretty=format:%ci)" $(OUT)
-	gzip -9 -n -c < $(OUT).tar > $(OUT).tar.gz
+	tar rf $(OUT).tar $(OUT)
+	gzip -9 -c < $(OUT).tar > $(OUT).tar.gz
 	xz -9 -c < $(OUT).tar > $(OUT).tar.xz
 	rm -rf $(OUT) $(OUT).tar
 

arch/Config.in

@@ -12,9 +12,6 @@ config BR2_SOFT_FLOAT
 config BR2_USE_MMU
 	bool
 
-config BR2_ARCH_HAS_FDPIC_SUPPORT
-	bool
-
 choice
 	prompt "Target Architecture"
 	default BR2_i386
@@ -80,16 +77,6 @@ config BR2_i386
 	  Intel i386 architecture compatible microprocessor
 	  http://en.wikipedia.org/wiki/I386
 
-config BR2_loongarch64
-	bool "LoongArch64"
-	select BR2_USE_MMU
-	select BR2_ARCH_IS_64
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_12
-	help
-	  LoongArch64 is 64-bit architecture developed by Loongson.
-	  http://www.loongson.cn/
-	  https://en.wikipedia.org/wiki/Loongson
-
 config BR2_m68k
 	bool "m68k"
 	# MMU support is set by the subarchitecture file, arch/Config.in.m68k
@@ -153,6 +140,14 @@ config BR2_mips64el
 	  http://www.mips.com/
 	  http://en.wikipedia.org/wiki/MIPS_Technologies
 
+config BR2_nios2
+	bool "Nios II"
+	select BR2_USE_MMU
+	help
+	  Nios II is a soft core processor from Altera Corporation.
+	  http://www.altera.com/
+	  http://en.wikipedia.org/wiki/Nios_II
+
 config BR2_or1k
 	bool "OpenRISC"
 	select BR2_USE_MMU
@@ -317,14 +312,6 @@ config BR2_ARCH_NEEDS_GCC_AT_LEAST_14
 	bool
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_13
 
-config BR2_ARCH_NEEDS_GCC_AT_LEAST_15
-	bool
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_14
-
-config BR2_ARCH_NEEDS_GCC_AT_LEAST_16
-	bool
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_15
-
 # The following string values are defined by the individual
 # Config.in.$ARCH files
 config BR2_ARCH
@@ -363,12 +350,6 @@ config BR2_GCC_TARGET_FPU
 config BR2_GCC_TARGET_FLOAT_ABI
 	string
 
-# The value of this option will be passed as --with-simd=<value> when
-# building gcc (internal backend) or -simd=<value> in the toolchain
-# wrapper (external toolchain)
-config BR2_GCC_TARGET_SIMD
-	string
-
 # The value of this option will be passed as --with-mode=<value> when
 # building gcc (internal backend) or -m<value> in the toolchain
 # wrapper (external toolchain)
@@ -393,10 +374,6 @@ if BR2_arm || BR2_armeb || BR2_aarch64 || BR2_aarch64_be
 source "arch/Config.in.arm"
 endif
 
-if BR2_loongarch64
-source "arch/Config.in.loongarch"
-endif
-
 if BR2_m68k
 source "arch/Config.in.m68k"
 endif
@@ -409,6 +386,10 @@ if BR2_mips || BR2_mips64 || BR2_mipsel || BR2_mips64el
 source "arch/Config.in.mips"
 endif
 
+if BR2_nios2
+source "arch/Config.in.nios2"
+endif
+
 if BR2_or1k
 source "arch/Config.in.or1k"
 endif
@@ -456,16 +437,6 @@ config BR2_BINFMT_ELF
 	  and executables used across different architectures and
 	  operating systems.
 
-config BR2_BINFMT_FDPIC
-	bool "FDPIC"
-	depends on BR2_ARCH_HAS_FDPIC_SUPPORT
-	select BR2_BINFMT_SUPPORTS_SHARED
-	help
-	  ELF FDPIC binaries are based on ELF, but allow the individual
-	  load segments of a binary to be located in memory
-	  independently of each other. This makes this format ideal for
-	  use in environments where no MMU is available.
-
 config BR2_BINFMT_FLAT
 	bool "FLAT"
 	depends on !BR2_USE_MMU

arch/Config.in.arm

@@ -89,20 +89,11 @@ config BR2_ARM_CPU_ARMV7A
 
 config BR2_ARM_CPU_ARMV7M
 	bool
-	select BR2_ARCH_HAS_FDPIC_SUPPORT
 
 config BR2_ARM_CPU_ARMV8A
 	bool
 	select BR2_USE_MMU
 
-# Armv9.0-A base specification is a super-set of Armv8.5-A. It is
-# fully compatible with Armv8. This symbol is defined to allow checks
-# for doing Armv9 optimization. Armv8 is also selected for
-# compatibility.
-config BR2_ARM_CPU_ARMV9A
-	bool
-	select BR2_ARM_CPU_ARMV8A
-
 choice
 	prompt "Target Architecture Variant"
 	default BR2_cortex_a53 if BR2_ARCH_IS_64
@@ -474,14 +465,6 @@ config BR2_cortex_a76_a55
 	select BR2_ARM_CPU_HAS_FP_ARMV8
 	select BR2_ARM_CPU_ARMV8A
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_9
-config BR2_cortex_a78
-	bool "cortex-A78"
-	select BR2_ARM_CPU_HAS_ARM if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_NEON if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_THUMB2 if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_11
 config BR2_neoverse_n1
 	bool "neoverse-N1 (aka ares)"
 	select BR2_ARM_CPU_HAS_ARM if !BR2_ARCH_IS_64
@@ -504,28 +487,6 @@ config BR2_saphira
 	select BR2_ARM_CPU_HAS_FP_ARMV8
 	select BR2_ARM_CPU_ARMV8A
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_8
-
-comment "armv9.0a cores"
-config BR2_cortex_a710
-	bool "Cortex-A710 (aka matterhorn)"
-	depends on BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV9A
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_12
-config BR2_neoverse_n2
-	bool "neoverse-N2 (aka perseus)"
-	depends on BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV9A
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_11
-
-comment "armv9.2a cores"
-config BR2_cortex_a720
-	bool "Cortex-A720 (aka hunter)"
-	depends on BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV9A
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_14
 endchoice
 
 config BR2_ARM_ENABLE_NEON
@@ -785,7 +746,7 @@ config BR2_ARM_INSTRUCTIONS_THUMB
 	# Thumb-1 and VFP are not compatible
 	depends on BR2_ARM_SOFT_FLOAT
 	help
-	  This option instructs the compiler to generate Thumb
+	  This option instructions the compiler to generate Thumb
 	  instructions, which allows to mix 16 bits instructions and
 	  32 bits instructions. This generally provides a much smaller
 	  compiled binary size.
@@ -798,7 +759,7 @@ config BR2_ARM_INSTRUCTIONS_THUMB2
 	bool "Thumb2"
 	depends on BR2_ARM_CPU_HAS_THUMB2
 	help
-	  This option instructs the compiler to generate Thumb2
+	  This option instructions the compiler to generate Thumb2
 	  instructions, which allows to mix 16 bits instructions and
 	  32 bits instructions. This generally provides a much smaller
 	  compiled binary size.
@@ -914,16 +875,10 @@ config BR2_GCC_TARGET_CPU
 	default "cortex-a75.cortex-a55"	if BR2_cortex_a75_a55
 	default "cortex-a76"	if BR2_cortex_a76
 	default "cortex-a76.cortex-a55"	if BR2_cortex_a76_a55
-	default "cortex-a78"	if BR2_cortex_a78
 	default "neoverse-n1"	if BR2_neoverse_n1
 	default "tsv110"	if BR2_tsv110
 	# armv8.4a
 	default "saphira"	if BR2_saphira
-	# armv9.0a
-	default "cortex-a710"	if BR2_cortex_a710
-	default "neoverse-n2"	if BR2_neoverse_n2
-	# armv9.2a
-	default "cortex-a720"	if BR2_cortex_a720
 
 config BR2_GCC_TARGET_ABI
 	default "aapcs-linux"	if BR2_arm || BR2_armeb

arch/Config.in.loongarch

@@ -1,138 +0,0 @@
-# LoongArch CPU
-
-choice
-	prompt "Target Architecture Variant"
-	default BR2_loongarch64_generic if BR2_ARCH_IS_64
-
-config BR2_loongarch64_generic
-	bool "Generic LoongArch 64-bit"
-	depends on BR2_ARCH_IS_64
-	help
-	  Generic LoongArch 64-bit processor.
-
-config BR2_loongarch64_v1_0
-	bool "LoongArch64 ISA version 1.0"
-	depends on BR2_ARCH_IS_64
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_14
-	help
-	  LoongArch64 ISA version 1.0 processor.
-
-config BR2_loongarch64_v1_1
-	bool "LoongArch64 ISA version 1.1"
-	depends on BR2_ARCH_IS_64
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_14
-	help
-	  LoongArch64 ISA version 1.1 processor.
-
-endchoice
-
-choice
-	prompt "FPU Type"
-	default BR2_LOONGARCH_FPU_64
-
-config BR2_LOONGARCH_FPU_64
-	bool "64"
-	help
-	  Allow the use of hardware floating-point instructions for
-	  32-bit and 64-bit operations.
-
-config BR2_LOONGARCH_FPU_32
-	bool "32"
-	# Only supported by lp64s and lp64f ABIs which are marked as broken
-	depends on BR2_BROKEN
-	help
-	  Allow the use of hardware floating-point instructions for
-	  32-bit operations only.
-
-config BR2_LOONGARCH_FPU_NONE
-	bool "none"
-	# Only supported by lp64s ABI which is marked as broken
-	depends on BR2_BROKEN
-	help
-	  Prevent the use of hardware floating-point instructions.
-endchoice
-
-choice
-	prompt "SIMD Type"
-	default BR2_LOONGARCH_SIMD_NONE
-
-config BR2_LOONGARCH_SIMD_NONE
-	bool "none"
-	help
-	  Prevent the use of hardware SIMD instructions.
-
-config BR2_LOONGARCH_SIMD_LSX
-	bool "LSX"
-	depends on BR2_LOONGARCH_FPU_64
-	help
-	  Enable generating instructions from the 128-bit LoongArch SIMD
-	  Extension (LSX).
-
-config BR2_LOONGARCH_SIMD_LASX
-	bool "LASX"
-	depends on BR2_LOONGARCH_FPU_64
-	help
-	  Enable generating instructions from the 256-bit LoongArch
-	  Advanced SIMD Extension (LASX) and the 128-bit LoongArch
-	  SIMD Extension (LSX).
-endchoice
-
-choice
-	prompt "Target ABI"
-	default BR2_LOONGARCH_ABI_LP64D if BR2_ARCH_IS_64 && BR2_LOONGARCH_FPU_64
-	default BR2_LOONGARCH_ABI_LP64F if BR2_ARCH_IS_64 && BR2_LOONGARCH_FPU_32
-	default BR2_LOONGARCH_ABI_LP64S if BR2_ARCH_IS_64 && BR2_LOONGARCH_SIMD_NONE
-
-config BR2_LOONGARCH_ABI_LP64D
-	bool "lp64d"
-	depends on BR2_ARCH_IS_64
-	depends on BR2_LOONGARCH_FPU_64
-
-config BR2_LOONGARCH_ABI_LP64F
-	bool "lp64f"
-	depends on BR2_ARCH_IS_64
-	# Failed to build host GCC initial, pending investigation
-	depends on BR2_BROKEN
-	depends on BR2_LOONGARCH_FPU_64 || BR2_LOONGARCH_FPU_32
-
-config BR2_LOONGARCH_ABI_LP64S
-	bool "lp64s"
-	depends on BR2_ARCH_IS_64
-	# GCC can't find libraries, pending investigation
-	depends on BR2_BROKEN
-endchoice
-
-config BR2_ARCH
-	default "loongarch64" if BR2_ARCH_IS_64
-
-config BR2_NORMALIZED_ARCH
-	default "loongarch"
-
-config BR2_ENDIAN
-	default "LITTLE"
-
-config BR2_GCC_TARGET_ARCH
-	default "loongarch64" if BR2_loongarch64_generic
-	default "la64v1.0" if BR2_loongarch64_v1_0
-	default "la64v1.1" if BR2_loongarch64_v1_1
-
-config BR2_GCC_TARGET_FPU
-	default "64" if BR2_LOONGARCH_FPU_64
-	default "32" if BR2_LOONGARCH_FPU_32
-	default "none" if BR2_LOONGARCH_FPU_NONE
-
-config BR2_GCC_TARGET_SIMD
-	default "lasx" if BR2_LOONGARCH_SIMD_LASX
-	default "lsx" if BR2_LOONGARCH_SIMD_LSX
-	default "none" if BR2_LOONGARCH_FPU_NONE
-
-config BR2_GCC_TARGET_ABI
-	default "lp64d" if BR2_LOONGARCH_ABI_LP64D
-	default "lp64f" if BR2_LOONGARCH_ABI_LP64F
-	default "lp64s" if BR2_LOONGARCH_ABI_LP64S
-
-config BR2_READELF_ARCH_NAME
-	default "LoongArch"
-
-# vim: ft=kconfig
-# -*- mode:kconfig; -*-

arch/Config.in.m68k

@@ -23,11 +23,6 @@ choice
 	help
 	  Specific CPU variant to use
 
-config BR2_m68k_68030
-	bool "68030"
-	select BR2_m68k_m68k
-	select BR2_USE_MMU
-
 config BR2_m68k_68040
 	bool "68040"
 	select BR2_m68k_m68k
@@ -41,7 +36,6 @@ config BR2_m68k_cf5208
 endchoice
 
 config BR2_GCC_TARGET_CPU
-	default "68030"		if BR2_m68k_68030
 	default "68040"		if BR2_m68k_68040
 	default "5208"		if BR2_m68k_cf5208
 

arch/Config.in.nios2

@@ -0,0 +1,14 @@
+config BR2_ARCH
+	default "nios2"
+
+config BR2_NORMALIZED_ARCH
+	default "nios2"
+
+config BR2_ENDIAN
+	default "LITTLE"
+
+config BR2_READELF_ARCH_NAME
+	default "Altera Nios II"
+
+# vim: ft=kconfig
+# -*- mode:kconfig; -*-

arch/arch.mk

@@ -16,7 +16,6 @@ GCC_TARGET_FP32_MODE := $(call qstrip,$(BR2_GCC_TARGET_FP32_MODE))
 GCC_TARGET_CPU := $(call qstrip,$(BR2_GCC_TARGET_CPU))
 GCC_TARGET_FPU := $(call qstrip,$(BR2_GCC_TARGET_FPU))
 GCC_TARGET_FLOAT_ABI := $(call qstrip,$(BR2_GCC_TARGET_FLOAT_ABI))
-GCC_TARGET_SIMD := $(call qstrip,$(BR2_GCC_TARGET_SIMD))
 GCC_TARGET_MODE := $(call qstrip,$(BR2_GCC_TARGET_MODE))
 
 # Explicitly set LD's "max-page-size" instead of relying on some defaults

board/aarch64-efi/patches/linux/linux.hash

@@ -1,2 +0,0 @@
-# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc
-sha256  62148e7e17f54c4a5ab5e75ad4882682c54bee818948be61a5963234fc0849fc  linux-6.11.11.tar.xz

board/aarch64-efi/post-image.sh

@@ -1,5 +1,5 @@
 #!/bin/sh
 
-BOARD_DIR=$(dirname "$0")
+BOARD_DIR="$(dirname $0)"
 
-cp -f "${BOARD_DIR}/grub.cfg" "${BINARIES_DIR}/efi-part/EFI/BOOT/grub.cfg"
+cp -f ${BOARD_DIR}/grub.cfg ${BINARIES_DIR}/efi-part/EFI/BOOT/grub.cfg

board/acmesystems/acqua-a5/at91-sama5d3_acqua.dts

@@ -9,7 +9,7 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-#include "sama5d31.dtsi"
+#include "microchip/sama5d31.dtsi"
 
 / {
 	model = "Acme Systems Acqua SOM";
@@ -149,14 +149,8 @@
 					#address-cells = <1>;
 					#size-cells = <1>;
 
-					nvmem-layout {
-						compatible = "fixed-layout";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						eth0_addr: eth-mac-addr@9A {
-							reg = <0x0 0x06>;
-						};
+					eth0_addr: eth-mac-addr@9A {
+						reg = <0x0 0x06>;
 					};
 				};
 				

board/acmesystems/acqua-a5/patches/linux/linux.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  6b19a3ae99423de2416964d67251d745910277af258b4c4c63e88fd87dbf0e27  linux-6.12.41.tar.xz
+sha256  b66a5b863b0f8669448b74ca83bd641a856f164b29956e539bbcb5fdeeab9cc6  linux-6.6.30.tar.xz

board/altera/socrates_cyclone5/boot-env.txt

@@ -0,0 +1,8 @@
+linux_load_address=0x100000
+linux_dtb_load_address=0x100
+linux_dtb=socfpga_cyclone5_socrates.dtb
+linux_load=mmc rescan; fatload mmc 0:1 ${linux_load_address} zImage; fatload mmc 0:1 ${linux_dtb_load_address} ${linux_dtb}
+bootargs=console=ttyS0,115200 root=/dev/mmcblk0p3 ro rootwait
+source_env=fatload mmc 0:1 0x2000000 boot.scr; source 0x2000000
+bootcmd=run linux_load; bootz ${linux_load_address} - ${linux_dtb_load_address}
+bootdelay=1

board/altera/socrates_cyclone5/genimage.cfg

@@ -0,0 +1,59 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"zImage",
+			"socfpga_cyclone5_socrates.dtb"
+		}
+	}
+
+	size = 8M
+}
+
+image uboot.img {
+	hdimage {
+		partition-table = "no"
+	}
+
+	partition spl {
+		in-partition-table = "no"
+		image = "u-boot-spl.bin.crc"
+		offset = 0
+		size = 64K
+	}
+
+	partition uboot-full {
+		in-partition-table = "no"
+		image = "u-boot.img"
+		offset = 256K
+	}
+
+	size = 1M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition uboot-env {
+		in-partition-table = "no"
+		image = "uboot-env.bin"
+		offset = 17K # 512 * 34 -> just after gpt
+	}
+
+	partition boot {
+		partition-type = 0xc
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
+	partition uboot {
+		partition-type = 0xa2
+		image = "uboot.img"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext2"
+		size = 500M
+	}
+}

board/altera/socrates_cyclone5/readme.txt

@@ -0,0 +1,52 @@
+EBV SoCrates Evaluation Board
+
+Intro
+=====
+
+More information about this board can be found here:
+https://rocketboards.org/foswiki/Documentation/EBVSoCratesEvaluationBoard
+
+Build
+=====
+
+First, load socrates config for buildroot
+
+    make socrates_cyclone5_defconfig
+
+Build everything
+
+    make
+
+Following files will be generated in output/images
+
+.
+├── boot.vfat
+├── rootfs.ext2
+├── rootfs.ext4 -> rootfs.ext2
+├── rootfs.tar
+├── sdcard.img
+├── socfpga_cyclone5_socrates.dtb
+├── u-boot-spl.bin
+├── u-boot-spl.bin.crc
+├── u-boot.bin
+├── u-boot.img
+├── uboot-env.bin
+├── uboot.img
+└── zImage
+
+
+Creating bootable SD card
+=========================
+
+Simply invoke
+
+dd if=output/images/sdcard.img of=/dev/sdX
+
+Where X is your SD card device (not partition)
+
+Booting
+=======
+
+Pins 6:8 on P18 selector is used to determine boot device. To boot socrates from
+sdcard set these pins to value 0x5 (101b). Remaining pins are used to determine
+how to configure FPGA and are not associated with booting into Linux kernel.

board/andes/ae350/post-build.sh

@@ -1,3 +1,3 @@
 #!/bin/sh
-cp "$BINARIES_DIR"/Image "$TARGET_DIR"/boot
-cp "$BINARIES_DIR"/ae350_ax45mp.dtb "$TARGET_DIR"/boot
+cp $BINARIES_DIR/Image $TARGET_DIR/boot
+cp $BINARIES_DIR/ae350_ax45mp.dtb $TARGET_DIR/boot

board/andes/ae350/readme.txt

@@ -41,49 +41,6 @@ After building, you should obtain the following files:
   |-- u-boot-spl.bin
   `-- u-boot.itb
 
-How to update the bootloader and device-tree
-============================================
-
-To update the bootloader and device tree, make sure you have
-an ICEman (Andes OpenOCD [1]) and AICE [2] connection set up
-as below:
-
-  Local Host                 Local/Remote Host
- .-----------------.          .--------------.
- | buildroot images|          |              |
- |                 |         ICEman host <IP:PORT>
- | .----------.    |          |  .--------.  |
- | | SPI_burn |<---+--socket--+->| ICEman |  |
- | '----------'    |          |  '--.-----'  |
- '-----------------'          '-----|--------'
-                                    |
-                                    USB
-   .--------------.                 |
-   | target       |           .-----v-----.
-   | board        <----JTAG---| AICE      |
-   |              |           '-----------'
-   '--------------'
-
-[1] https://github.com/andestech/ICEman
-[2] https://www.andestech.com/en/products-solutions/andeshape-platforms/aice-micro/
-
-The Andes SPI_burn tool will be located in output/host/bin. Use
-the following commands to update the bootloader and device tree:
-
-  $ SPI_burn --host $ICE_IP --port $ICE_BURNER_PORT --addr 0x0     -i u-boot-spl.bin
-  $ SPI_burn --host $ICE_IP --port $ICE_BURNER_PORT --addr 0x10000 -i u-boot.itb
-  $ SPI_burn --host $ICE_IP --port $ICE_BURNER_PORT --addr 0xf0000 -i ae350_ax45mp.dtb
-
-Note that the --addr option specifies the offset starting from
-the flash base address 0x80000000 and set by U-Boot configurations.
-e.g.
-u-boot-spl.bin  : CONFIG_SPL_TEXT_BASE=0x80000000
-u-boot.itb      : CONFIG_SPL_LOAD_FIT_ADDRESS=0x80010000
-ae350_ax45mp.dtb: CONFIG_SYS_FDT_BASE=0x800f0000
-
-How to write the SD card
-========================
-
 Copy the sdcard.img to a SD card with "dd":
 
   $ sudo dd if=sdcard.img of=/dev/sdX bs=4096

board/andes/ae350/uboot.config.fragment

@@ -1,5 +1,6 @@
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_MMC=y
+# CONFIG_SPL_RAM_SUPPORT is not set
 CONFIG_SPL_OPENSBI_LOAD_ADDR=0x0
 CONFIG_SPL_OPENSBI_SCRATCH_OPTIONS=0x0
 CONFIG_DISPLAY_CPUINFO=y

board/arm/foundation-v8/patches/linux/linux.hash

@@ -1,2 +1,2 @@
-# From https://cdn.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc
-sha256  3507dd105b0a0e1101bd43d294472fccf853429a259a5fa7c67467bba318f8e9  linux-6.15.7.tar.xz
+# Locally calculated
+sha256  b0bb92d982f88380e5b2059349c3a862e0afa712e0646eb0e082b9c2c5cb5176  linux-6.8.10.tar.xz

board/arm/foundation-v8/readme.txt

@@ -1,39 +1,16 @@
-Introduction
-============
-
 This is the support for the ARM Foundation v8 machine emulated by the
 ARM software simulator of the AArch64 architecture.
 
-Building
-========
+First, one has to download the AArch64 software simulator from:
 
-  $ make arm_foundationv8_defconfig
-  $ make
+  https://developer.arm.com/-/media/Files/downloads/ecosystem-models/FM_11_25/Foundation_Platform_11.25_15_Linux64.tgz
 
-Generated files under output/images:
-
-* linux-system.axf: An image comprising the boot-wrapper-aarch64 minimal
-                    firmware and bootloader, a Devicetree and the Linux kernel.
-* rootfs.ext2:      The OS root filesystem.
-
-Running on the simulator
-========================
-
-Download the AArch64 software simulator from one of the following sources,
-corresponding to your host computer:
-
-- https://developer.arm.com/-/cdn-downloads/permalink/FVPs-Architecture/FM-11.29/Foundation_Platform_11.29_27_Linux64.tgz
-- https://developer.arm.com/-/cdn-downloads/permalink/FVPs-Architecture/FM-11.29/Foundation_Platform_11.29_27_Linux64_armv8l.tgz
-
-The model will be located under one of the corresponding folders:
-
-- Foundation_Platformpkg/models/Linux64_GCC-9.3
-- Foundation_Platformpkg/models/Linux64_armv8l_GCC-9.3
+Then, use the arm_foundationv8_defconfig configuration to build your
+Buildroot system.
 
 Finally, boot your system with:
 
- Foundation_Platform \
-    --arm-v8.0 \
+ ${LOCATION_OF_FOUNDATIONV8_SIMULATOR}/models/Linux64_GCC-9.3/Foundation_Platform \
     --image output/images/linux-system.axf \
     --block-device output/images/rootfs.ext2 \
     --network=nat \

board/arm/fvp-ebbr/patches/arm-trusted-firmware/0001-feat-fvp-add-stdout-path.patch

@@ -0,0 +1,45 @@
+From 8c30a0c7fe0162de0618b26fb34cc91ea582e5f7 Mon Sep 17 00:00:00 2001
+From: Debbie Martin <Debbie.Martin@arm.com>
+Date: Wed, 27 Sep 2023 18:05:26 +0100
+Subject: [PATCH] feat(fvp): add stdout-path
+
+Add stdout-path to the fvp-base devicetree to be passed to BL33 (U-Boot)
+and then to the Linux kernel to be compliant to Arm SystemReady IR:
+https://developer.arm.com/documentation/DUI1101/2-0/
+Configure-U-Boot-for-SystemReady/Adapt-the-Devicetree
+
+This has been tested by booting fvp-base to Linux and ensuring the
+console is accessible.
+
+Change-Id: Iae98630f18f735ce344c1158f41f358c2a49eeb6
+Signed-off-by: Diego Sueiro <Diego.Sueiro@arm.com>
+Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
+Upstream: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/+/8c30a0c7fe0162de0618b26fb34cc91ea582e5f7%5E!/
+Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
+---
+ fdts/fvp-base-psci-common.dtsi | 7 ++++---
+ 1 file changed, 4 insertions(+), 3 deletions(-)
+
+diff --git a/fdts/fvp-base-psci-common.dtsi b/fdts/fvp-base-psci-common.dtsi
+index 79cf37d3b0..ff31ba7616 100644
+--- a/fdts/fvp-base-psci-common.dtsi
++++ b/fdts/fvp-base-psci-common.dtsi
+@@ -27,11 +27,12 @@
+ 	#address-cells = <2>;
+ 	#size-cells = <2>;
+ 
++	chosen {
++		stdout-path = "serial0:115200n8";
+ #if (ENABLE_RME == 1)
+-	chosen { bootargs = "console=ttyAMA0 earlycon=pl011,0x1c090000 root=/dev/vda ip=on";};
+-#else
+-	chosen {};
++		bootargs = "console=ttyAMA0 earlycon=pl011,0x1c090000 root=/dev/vda ip=on";
+ #endif
++	};
+ 
+ 	aliases {
+ 		serial0 = &v2m_serial0;
+-- 
+2.43.0
+

board/arm/fvp-ebbr/patches/arm-trusted-firmware/arm-trusted-firmware.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  c0f23ccc71c49989e9ad238acf334473c17b7c88f79a20c829c3d443e3794a22  arm-trusted-firmware-v2.11-git4.tar.gz
+sha256  7efa89e1b4e4106ee05d68e876c8efbb146364d89cfd5d26bf4647b09c08f32b  arm-trusted-firmware-v2.10-git4.tar.gz

board/arm/fvp-ebbr/patches/linux/linux.hash

@@ -1,2 +1,2 @@
-# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc
-sha256  524858852f5869a9ef17de8b1e6e7faf05bcb2c462bc96b3c24dbf82ede373cf  linux-6.10.12.tar.xz
+# Locally calculated
+sha256  b78dcd09f6b725872a2c0c87a70a064b0fbbcccfe5ce60aa46c669934a9e28b6  linux-6.8.11.tar.xz

board/arm/fvp-ebbr/patches/uboot/uboot.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  f591da9ab90ef3d6b3d173766d0ddff90c4ed7330680897486117df390d83c8f  u-boot-2024.07.tar.bz2
+sha256  077cf8ca283411103ad274a3724dacb5068ede824de749beff9c9e5b531b43ea  u-boot-2024.07-rc3.tar.bz2

board/arm/fvp-ebbr/readme.txt

@@ -26,8 +26,8 @@ Running on the FVP
 Download the FVP from one of the following sources, corresponding to your host
 computer:
 
-- https://developer.arm.com/-/cdn-downloads/permalink/Fixed-Virtual-Platforms/FM-11.27/FVP_Base_RevC-2xAEMvA_11.27_19_Linux64.tgz
-- https://developer.arm.com/-/cdn-downloads/permalink/Fixed-Virtual-Platforms/FM-11.27/FVP_Base_RevC-2xAEMvA_11.27_19_Linux64_armv8l.tgz
+- https://developer.arm.com/-/media/Files/downloads/ecosystem-models/FM_11_25/FVP_Base_RevC-2xAEMvA_11.25_15_Linux64.tgz
+- https://developer.arm.com/-/media/Files/downloads/ecosystem-models/FM_11_25/FVP_Base_RevC-2xAEMvA_11.25_15_Linux64_armv8l.tgz
 
 The FVP will be located under one of the corresponding folders:
 

board/beagleboard/beaglebone/patches/linux/linux.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  1db327d0743e97ec725fefe05065a6fb779abe3063845fc3b551a4a716247c0a  linux-6.12.34-ti-arm32-r12.tar.gz
+sha256  f1ae7325c6c146e0f852866a3bfd3f90ae1b5f46e414bc99a38384ed677e3721  linux-6.6.32-ti-arm32-r7.tar.gz

board/beagleboard/beaglebone/patches/uboot/uboot.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  0f933f6c5a426895bf306e93e6ac53c60870e4b54cda56d95211bec99e63bec7  u-boot-2025.07.tar.bz2
+sha256  f591da9ab90ef3d6b3d173766d0ddff90c4ed7330680897486117df390d83c8f  u-boot-2024.07.tar.bz2

board/beagleboard/beagleboneai/patches/linux/linux.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  c435bd74d1c21fc5a950781a50d78bae2b93944144694843359948ad3afc72a5  linux-6.12.50.tar.xz
+sha256  c52bc1ffc396c11bce335c9ee5cd55fe4213cbc1fb4026ff62bb90c864c61f62  linux-5.10.217.tar.xz

board/beagleboard/beagleboneai/patches/uboot/0001-am57xx-board.c-assume-on-failure-its-a-BBONE-AI.patch

@@ -1,31 +0,0 @@
-From 0b161f8e89a411fe54059cf1d0ba61354ee1e8a2 Mon Sep 17 00:00:00 2001
-From: Robert Nelson <robertcnelson@gmail.com>
-Date: Wed, 3 Aug 2022 11:28:10 -0500
-Subject: [PATCH] am57xx/board.c: assume on failure its a BBONE-AI
-
-Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
-Upstream: https://github.com/beagleboard/u-boot/commit/0b161f8e89a411fe54059cf1d0ba61354ee1e8a2
-Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
----
- board/ti/am57xx/board.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
-diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
-index cfc825e52a3..f369693f382 100644
---- a/board/ti/am57xx/board.c
-+++ b/board/ti/am57xx/board.c
-@@ -529,8 +529,10 @@ void do_board_detect(void)
- 
- 	rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
- 				  CONFIG_EEPROM_CHIP_ADDRESS);
--	if (rc)
-+	if (rc) {
- 		printf("ti_i2c_eeprom_init failed %d\n", rc);
-+		ti_i2c_eeprom_am_set("BBONE-AI", "A");
-+	};
- 
- #ifdef CONFIG_SUPPORT_EMMC_BOOT
- 	rc = board_bootmode_has_emmc();
--- 
-2.39.5
-

board/beagleboard/beagleboneai/patches/uboot/0001-am57xx_evm-fixes.patch

@@ -0,0 +1,839 @@
+From 702ea30b462ba06f4fbee3393f0e6c19531f1e5f Mon Sep 17 00:00:00 2001
+From: Robert Nelson <robertcnelson@gmail.com>
+Date: Fri, 25 Jun 2021 11:33:25 -0500
+Subject: [PATCH] am57xx_evm-fixes
+
+Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
+[Patch from https://github.com/beagleboard/u-boot/commit/702ea30b462ba06f4fbee3393f0e6c19531f1e5f]
+Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
+---
+ arch/arm/mach-omap2/omap5/hw_data.c |   1 +
+ board/ti/am57xx/board.c             | 167 +++++++++++-
+ configs/am57xx_evm_defconfig        |  15 +-
+ include/configs/ti_armv7_common.h   | 407 ++++++++++++++++++++++++++++
+ include/configs/ti_omap5_common.h   |   5 +
+ include/environment/ti/boot.h       |  32 ++-
+ include/environment/ti/mmc.h        |  49 +++-
+ 7 files changed, 651 insertions(+), 25 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/omap5/hw_data.c b/arch/arm/mach-omap2/omap5/hw_data.c
+index fa4e27063c..d5192b1671 100644
+--- a/arch/arm/mach-omap2/omap5/hw_data.c
++++ b/arch/arm/mach-omap2/omap5/hw_data.c
+@@ -421,6 +421,7 @@ void enable_basic_clocks(void)
+ 		(*prcm)->cm_l4per_uart1_clkctrl,
+ 		(*prcm)->cm_l4per_uart3_clkctrl,
+ 		(*prcm)->cm_l4per_i2c1_clkctrl,
++		(*prcm)->cm_l4per_i2c4_clkctrl,
+ #ifdef CONFIG_DRIVER_TI_CPSW
+ 		(*prcm)->cm_gmac_gmac_clkctrl,
+ #endif
+diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
+index 73063faee6..ad05c41f22 100644
+--- a/board/ti/am57xx/board.c
++++ b/board/ti/am57xx/board.c
+@@ -41,6 +41,7 @@
+ #include <mmc.h>
+ #include <dm/uclass.h>
+ #include <hang.h>
++#include <i2c.h>
+ 
+ #include "../common/board_detect.h"
+ #include "mux_data.h"
+@@ -528,8 +529,10 @@ void do_board_detect(void)
+ 
+ 	rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
+ 				  CONFIG_EEPROM_CHIP_ADDRESS);
+-	if (rc)
++	if (rc) {
+ 		printf("ti_i2c_eeprom_init failed %d\n", rc);
++		ti_i2c_eeprom_am_set("BBONE-AI", "A");
++	};
+ 
+ #ifdef CONFIG_SUPPORT_EMMC_BOOT
+ 	rc = board_bootmode_has_emmc();
+@@ -579,6 +582,164 @@ void do_board_detect(void)
+ 			 "Board: %s REV %s\n", bname, board_ti_get_rev());
+ }
+ 
++struct am335x_cape_eeprom_id {
++	unsigned int header;
++	char eeprom_rev[2];
++	char board_name[32];
++	char version[4];
++	char manufacture[16];
++	char part_number[16];
++	char number_of_pins[2];
++	char serial_number[12];
++	char pin_usage[140];
++	char vdd_3v3exp[ 2];
++	char vdd_5v[ 2];
++	char sys_5v[2];
++	char dc_supplied[2];
++};
++
++#define CAPE_EEPROM_BUS_NUM 3
++#define CAPE_EEPROM_ADDR0	0x54
++#define CAPE_EEPROM_ADDR1	0x55
++#define CAPE_EEPROM_ADDR2	0x56
++#define CAPE_EEPROM_ADDR3	0x57
++
++#define CAPE_EEPROM_ADDR_LEN 0x10
++
++static int probe_cape_eeprom(struct am335x_cape_eeprom_id *cape_header)
++{
++	int ret;
++	struct udevice *dev;
++	unsigned char addr;
++	/* /lib/firmware/BB-CAPE-DISP-CT4-00A0.dtbo */
++	/* 14 + 16 + 1 + 4 + 5 = 40 */
++	char hash_cape_overlay[40];
++	char cape_overlay[26];
++	char process_cape_part_number[16];
++	char process_cape_version[4];
++	char end_part_number;
++	char cape_overlay_pass_to_kernel[18];
++
++	strlcpy(cape_overlay_pass_to_kernel, "", 1);
++
++	for ( addr = CAPE_EEPROM_ADDR0; addr <= CAPE_EEPROM_ADDR3; addr++ ) {
++		ret = i2c_get_chip_for_busnum(CAPE_EEPROM_BUS_NUM, addr, 1, &dev);
++		if (ret) {
++			printf("BeagleBone Cape EEPROM: no EEPROM at address: 0x%x\n", addr);
++		} else {
++			printf("BeagleBone Cape EEPROM: found EEPROM at address: 0x%x\n", addr);
++
++			ret = i2c_set_chip_offset_len(dev, 2);
++			if (ret) {
++				printf("BeagleBone Cape EEPROM: i2c_set_chip_offset_len failure\n");
++			}
++
++			ret = dm_i2c_read(dev, 0, (uchar *)cape_header, sizeof(struct am335x_cape_eeprom_id));
++			if (ret) {
++				printf("BeagleBone Cape EEPROM: Cannot read eeprom params\n");
++			}
++
++			if (cape_header->header == 0xEE3355AA) {
++				strlcpy(hash_cape_overlay, "/lib/firmware/", 14 + 1);
++				strlcpy(cape_overlay, "", 2);
++				strlcpy(cape_overlay_pass_to_kernel, "", 2);
++				strlcpy(process_cape_part_number, "...............", 16 + 1);
++				strlcpy(process_cape_version, "...", 4 + 1);
++
++				strlcpy(process_cape_part_number, cape_header->part_number, 16 + 1);
++				printf("BeagleBone Cape EEPROM: debug part_number field:[%s]\n", process_cape_part_number);
++
++				//FIXME: some capes end with '.'
++				if ( process_cape_part_number[15] == 0x2E ) {
++					puts("debug: fixup, extra . in eeprom field\n");
++					process_cape_part_number[15] = 0x00;
++					if ( process_cape_part_number[14] == 0x2E ) {
++						process_cape_part_number[14] = 0x00;
++					}
++				}
++
++				//Find ending 0x00 or 0xFF
++				puts("BeagleBone Cape EEPROM: debug part_number field HEX:[");
++				end_part_number=16;
++				for ( int i=0; i <= 16; i++ ) {
++					if (( process_cape_part_number[i] == 0x00 ) || ( process_cape_part_number[i] == 0xFF )) {
++						end_part_number=i;
++						i=17;
++					} else {
++						printf("%x", process_cape_part_number[i]);
++					}
++				}
++				puts("]\n");
++
++				strncat(cape_overlay_pass_to_kernel, process_cape_part_number, end_part_number);
++				strncat(cape_overlay_pass_to_kernel, ",", 1);
++				//printf("debug: %s\n", cape_overlay_pass_to_kernel);
++
++				strncat(hash_cape_overlay, process_cape_part_number, end_part_number);
++				strncat(cape_overlay, process_cape_part_number, end_part_number);
++				//printf("debug: %s %s\n", hash_cape_overlay, cape_overlay);
++
++				strncat(hash_cape_overlay, "-", 1);
++				strncat(cape_overlay, "-", 1);
++				//printf("debug: %s %s\n", hash_cape_overlay, cape_overlay);
++
++				strlcpy(process_cape_version, cape_header->version, 4 + 1);
++				//printf("debug: version field:[%s]\n", process_cape_version);
++
++				//Find invalid 0xFF -> 0x30 BBAI FAN Cape...
++				puts("BeagleBone Cape EEPROM: debug version field HEX:[");
++				for ( int i=0; i <= 3; i++ ) {
++					printf("%x", process_cape_version[i]);
++					if ( process_cape_version[i] == 0xFF ) {
++						process_cape_version[i] = 0x30;
++					}
++				}
++				puts("]\n");
++
++				strncat(hash_cape_overlay, process_cape_version, 4);
++				strncat(cape_overlay, process_cape_version, 4);
++				//printf("debug: %s %s\n", hash_cape_overlay, cape_overlay);
++
++				strncat(hash_cape_overlay, ".dtbo", 5);
++				strncat(cape_overlay, ".dtbo", 5);
++				//printf("debug: %s %s\n", hash_cape_overlay, cape_overlay);
++
++				printf("BeagleBone Cape EEPROM: 0x%x %s\n", addr, cape_overlay);
++
++				switch(addr) {
++					case CAPE_EEPROM_ADDR0:
++						env_set("uboot_overlay_addr0", cape_overlay);
++						env_set("uboot_detected_capes_addr0", cape_overlay_pass_to_kernel);
++						break;
++					case CAPE_EEPROM_ADDR1:
++						env_set("uboot_overlay_addr1", cape_overlay);
++						env_set("uboot_detected_capes_addr1", cape_overlay_pass_to_kernel);
++						break;
++					case CAPE_EEPROM_ADDR2:
++						env_set("uboot_overlay_addr2", cape_overlay);
++						env_set("uboot_detected_capes_addr2", cape_overlay_pass_to_kernel);
++						break;
++					case CAPE_EEPROM_ADDR3:
++						env_set("uboot_overlay_addr3", cape_overlay);
++						env_set("uboot_detected_capes_addr3", cape_overlay_pass_to_kernel);
++						break;
++				}
++				env_set("uboot_detected_capes", "1");
++			} else {
++				printf("BeagleBone Cape EEPROM: EEPROM contents not valid (or blank) on address: 0x%x\n", addr);
++			}
++		}
++	}
++	return 0;
++}
++
++void do_cape_detect(void)
++{
++	struct am335x_cape_eeprom_id cape_header;
++
++	probe_cape_eeprom(&cape_header);
++}
++
+ static void setup_board_eeprom_env(void)
+ {
+ 	char *name = "beagle_x15";
+@@ -782,8 +943,10 @@ int board_late_init(void)
+ 	/* Just probe the potentially supported cdce913 device */
+ 	uclass_get_device(UCLASS_CLK, 0, &dev);
+ 
+-	if (board_is_bbai())
++	if (board_is_bbai()) {
+ 		env_set("console", "ttyS0,115200n8");
++		do_cape_detect();
++	}
+ 
+ #if !defined(CONFIG_SPL_BUILD)
+ 	board_ti_set_ethaddr(2);
+diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig
+index 4da4aaa1c7..ed5b8aec16 100644
+--- a/configs/am57xx_evm_defconfig
++++ b/configs/am57xx_evm_defconfig
+@@ -10,16 +10,20 @@ CONFIG_SPL_TEXT_BASE=0x40300000
+ CONFIG_OMAP54XX=y
+ CONFIG_TARGET_AM57XX_EVM=y
+ CONFIG_SPL=y
+-CONFIG_ENV_OFFSET_REDUND=0x280000
+ CONFIG_SPL_SPI_FLASH_SUPPORT=y
+ CONFIG_SPL_SPI_SUPPORT=y
+ CONFIG_ARMV7_LPAE=y
+-CONFIG_DEFAULT_DEVICE_TREE="am572x-idk"
++CONFIG_DEFAULT_DEVICE_TREE="am57xx-beagle-x15-revc"
+ CONFIG_AHCI=y
+ CONFIG_DISTRO_DEFAULTS=y
+ CONFIG_SPL_LOAD_FIT=y
+ # CONFIG_USE_SPL_FIT_GENERATOR is not set
+ CONFIG_OF_BOARD_SETUP=y
++CONFIG_BOOTDELAY=1
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
++CONFIG_AUTOBOOT_DELAY_STR="d"
++CONFIG_AUTOBOOT_STOP_STR=" "
+ CONFIG_USE_BOOTARGS=y
+ CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS2,115200 androidboot.console=ttyS2 androidboot.hardware=beagle_x15board"
+ # CONFIG_USE_BOOTCOMMAND is not set
+@@ -48,13 +52,12 @@ CONFIG_BOOTP_DNS2=y
+ CONFIG_CMD_AVB=y
+ CONFIG_OF_CONTROL=y
+ CONFIG_SPL_OF_CONTROL=y
+-CONFIG_OF_LIST="am57xx-beagle-x15 am57xx-beagle-x15-revb1 am57xx-beagle-x15-revc am5729-beagleboneai am572x-idk am571x-idk am574x-idk"
++CONFIG_OF_LIST="am57xx-beagle-x15 am57xx-beagle-x15-revb1 am57xx-beagle-x15-revc am5729-beagleboneai"
+ CONFIG_ENV_OVERWRITE=y
+-CONFIG_ENV_IS_IN_MMC=y
+-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++# CONFIG_ENV_IS_IN_FAT is not set
+ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+-CONFIG_SYS_MMC_ENV_DEV=1
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++# CONFIG_SPL_ENV_IS_NOWHERE is not set
+ CONFIG_VERSION_VARIABLE=y
+ CONFIG_BOOTP_SEND_HOSTNAME=y
+ CONFIG_DM=y
+diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
+index f13e9e5264..eabd03e27d 100644
+--- a/include/configs/ti_armv7_common.h
++++ b/include/configs/ti_armv7_common.h
+@@ -92,6 +92,413 @@
+ #define CONFIG_SYS_I2C
+ #endif
+ 
++#define EEPROM_PROGRAMMING \
++	"eeprom_dump=i2c dev 0; " \
++		"i2c md 0x50 0x00.2 20; " \
++		"\0" \
++	"eeprom_blank=i2c dev 0; " \
++		"i2c mw 0x50 0x00.2 ff; " \
++		"i2c mw 0x50 0x01.2 ff; " \
++		"i2c mw 0x50 0x02.2 ff; " \
++		"i2c mw 0x50 0x03.2 ff; " \
++		"i2c mw 0x50 0x04.2 ff; " \
++		"i2c mw 0x50 0x05.2 ff; " \
++		"i2c mw 0x50 0x06.2 ff; " \
++		"i2c mw 0x50 0x07.2 ff; " \
++		"i2c mw 0x50 0x08.2 ff; " \
++		"i2c mw 0x50 0x09.2 ff; " \
++		"i2c mw 0x50 0x0a.2 ff; " \
++		"i2c mw 0x50 0x0b.2 ff; " \
++		"i2c mw 0x50 0x0c.2 ff; " \
++		"i2c mw 0x50 0x0d.2 ff; " \
++		"i2c mw 0x50 0x0e.2 ff; " \
++		"i2c mw 0x50 0x0f.2 ff; " \
++		"i2c mw 0x50 0x10.2 ff; " \
++		"i2c mw 0x50 0x11.2 ff; " \
++		"i2c mw 0x50 0x12.2 ff; " \
++		"i2c mw 0x50 0x13.2 ff; " \
++		"i2c mw 0x50 0x14.2 ff; " \
++		"i2c mw 0x50 0x15.2 ff; " \
++		"i2c mw 0x50 0x16.2 ff; " \
++		"i2c mw 0x50 0x17.2 ff; " \
++		"i2c mw 0x50 0x18.2 ff; " \
++		"i2c mw 0x50 0x19.2 ff; " \
++		"i2c mw 0x50 0x1a.2 ff; " \
++		"i2c mw 0x50 0x1b.2 ff; " \
++		"i2c mw 0x50 0x1c.2 ff; " \
++		"i2c mw 0x50 0x1d.2 ff; " \
++		"i2c mw 0x50 0x1e.2 ff; " \
++		"i2c mw 0x50 0x1f.2 ff; " \
++		"i2c md 0x50 0x00.2 20; " \
++		"\0" \
++	"eeprom_x15_b1=i2c dev 0; " \
++		"i2c mw 0x50 0x00.2 aa; " \
++		"i2c mw 0x50 0x01.2 55; " \
++		"i2c mw 0x50 0x02.2 33; " \
++		"i2c mw 0x50 0x03.2 ee; " \
++		"i2c mw 0x50 0x04.2 42; " \
++		"i2c mw 0x50 0x05.2 42; " \
++		"i2c mw 0x50 0x06.2 52; " \
++		"i2c mw 0x50 0x07.2 44; " \
++		"i2c mw 0x50 0x08.2 58; " \
++		"i2c mw 0x50 0x09.2 31; " \
++		"i2c mw 0x50 0x0a.2 35; " \
++		"i2c mw 0x50 0x0b.2 5f; " \
++		"i2c mw 0x50 0x0c.2 42; " \
++		"i2c mw 0x50 0x0d.2 2e; " \
++		"i2c mw 0x50 0x0e.2 31; " \
++		"i2c mw 0x50 0x0f.2 30; " \
++		"i2c mw 0x50 0x10.2 57; " \
++		"i2c mw 0x50 0x11.2 57; " \
++		"i2c mw 0x50 0x12.2 59; " \
++		"i2c mw 0x50 0x13.2 59; " \
++		"i2c mw 0x50 0x14.2 34; " \
++		"i2c mw 0x50 0x15.2 50; " \
++		"i2c mw 0x50 0x16.2 35; " \
++		"i2c mw 0x50 0x17.2 35; " \
++		"i2c mw 0x50 0x18.2 30; " \
++		"i2c mw 0x50 0x19.2 30; " \
++		"i2c mw 0x50 0x1a.2 30; " \
++		"i2c mw 0x50 0x1b.2 30; " \
++		"i2c mw 0x50 0x1c.2 ff; " \
++		"i2c mw 0x50 0x1d.2 ff; " \
++		"i2c mw 0x50 0x1e.2 ff; " \
++		"i2c mw 0x50 0x1f.2 ff; " \
++		"i2c md 0x50 0x00.2 20; " \
++		"\0" \
++	"eeprom_x15_c=i2c dev 0; " \
++		"i2c mw 0x50 0x00.2 aa; " \
++		"i2c mw 0x50 0x01.2 55; " \
++		"i2c mw 0x50 0x02.2 33; " \
++		"i2c mw 0x50 0x03.2 ee; " \
++		"i2c mw 0x50 0x04.2 42; " \
++		"i2c mw 0x50 0x05.2 42; " \
++		"i2c mw 0x50 0x06.2 52; " \
++		"i2c mw 0x50 0x07.2 44; " \
++		"i2c mw 0x50 0x08.2 58; " \
++		"i2c mw 0x50 0x09.2 31; " \
++		"i2c mw 0x50 0x0a.2 35; " \
++		"i2c mw 0x50 0x0b.2 5f; " \
++		"i2c mw 0x50 0x0c.2 43; " \
++		"i2c mw 0x50 0x0d.2 2e; " \
++		"i2c mw 0x50 0x0e.2 30; " \
++		"i2c mw 0x50 0x0f.2 30; " \
++		"i2c mw 0x50 0x10.2 79; " \
++		"i2c mw 0x50 0x11.2 79; " \
++		"i2c mw 0x50 0x12.2 77; " \
++		"i2c mw 0x50 0x13.2 77; " \
++		"i2c mw 0x50 0x14.2 50; " \
++		"i2c mw 0x50 0x15.2 58; " \
++		"i2c mw 0x50 0x16.2 31; " \
++		"i2c mw 0x50 0x17.2 35; " \
++		"i2c mw 0x50 0x18.2 6e; " \
++		"i2c mw 0x50 0x19.2 6e; " \
++		"i2c mw 0x50 0x1a.2 6e; " \
++		"i2c mw 0x50 0x1b.2 6e; " \
++		"i2c mw 0x50 0x1c.2 ff; " \
++		"i2c mw 0x50 0x1d.2 ff; " \
++		"i2c mw 0x50 0x1e.2 ff; " \
++		"i2c mw 0x50 0x1f.2 ff; " \
++		"i2c md 0x50 0x00.2 20; " \
++	"eeprom_bbai_a2=i2c dev 0; " \
++		"i2c mw 0x50 0x00.2 aa; " \
++		"i2c mw 0x50 0x01.2 55; " \
++		"i2c mw 0x50 0x02.2 33; " \
++		"i2c mw 0x50 0x03.2 ee; " \
++		"i2c mw 0x50 0x04.2 42; " \
++		"i2c mw 0x50 0x05.2 42; " \
++		"i2c mw 0x50 0x06.2 4F; " \
++		"i2c mw 0x50 0x07.2 4E; " \
++		"i2c mw 0x50 0x08.2 45; " \
++		"i2c mw 0x50 0x09.2 2D; " \
++		"i2c mw 0x50 0x0a.2 41; " \
++		"i2c mw 0x50 0x0b.2 49; " \
++		"i2c mw 0x50 0x0c.2 30; " \
++		"i2c mw 0x50 0x0d.2 30; " \
++		"i2c mw 0x50 0x0e.2 41; " \
++		"i2c mw 0x50 0x0f.2 32; " \
++		"i2c mw 0x50 0x10.2 57; " \
++		"i2c mw 0x50 0x11.2 57; " \
++		"i2c mw 0x50 0x12.2 59; " \
++		"i2c mw 0x50 0x13.2 59; " \
++		"i2c mw 0x50 0x14.2 53; " \
++		"i2c mw 0x50 0x15.2 42; " \
++		"i2c mw 0x50 0x16.2 41; " \
++		"i2c mw 0x50 0x17.2 49; " \
++		"i2c mw 0x50 0x18.2 30; " \
++		"i2c mw 0x50 0x19.2 30; " \
++		"i2c mw 0x50 0x1a.2 30; " \
++		"i2c mw 0x50 0x1b.2 30; " \
++		"i2c mw 0x50 0x1c.2 30; " \
++		"i2c mw 0x50 0x1d.2 30; " \
++		"i2c mw 0x50 0x1e.2 ff; " \
++		"i2c mw 0x50 0x1f.2 ff; " \
++		"i2c md 0x50 0x00.2 20; " \
++		"\0" \
++
++#define EEWIKI_MMC_BOOT \
++	"mmc_boot=${devtype} dev ${mmcdev}; ${devtype} part; " \
++		"if ${devtype} rescan; then " \
++			"echo Scanning ${devtype} device ${mmcdev};" \
++			"setenv bootpart ${mmcdev}:1; " \
++			"echo Checking for: /uEnv.txt ...;" \
++			"if test -e ${devtype} ${bootpart} /uEnv.txt; then " \
++				"load ${devtype} ${bootpart} ${loadaddr} /uEnv.txt;" \
++				"env import -t ${loadaddr} ${filesize};" \
++				"echo Loaded environment from /uEnv.txt;" \
++				"echo Checking if uenvcmd is set ...;" \
++				"if test -n ${uenvcmd}; then " \
++					"echo Running uenvcmd ...;" \
++					"run uenvcmd;" \
++				"fi;" \
++			"fi; " \
++			"echo Checking for: /boot/uEnv.txt ...;" \
++			"for i in 1 2 3 4 5 6 7 ; do " \
++				"setenv mmcpart ${i};" \
++				"setenv bootpart ${mmcdev}:${mmcpart};" \
++				"if test -e ${devtype} ${bootpart} /boot/uEnv.txt; then " \
++					"load ${devtype} ${bootpart} ${loadaddr} /boot/uEnv.txt;" \
++					"env import -t ${loadaddr} ${filesize};" \
++					"echo Loaded environment from /boot/uEnv.txt;" \
++					"if test -n ${dtb}; then " \
++						"setenv fdtfile ${dtb};" \
++						"echo debug: [dtb=${fdtfile}] ...;" \
++					"fi;" \
++					"echo Checking if uname_r is set in /boot/uEnv.txt ...;" \
++					"if test -n ${uname_r}; then " \
++						"echo debug: [uname_r=${uname_r}] ...;" \
++						"setenv oldroot /dev/mmcblk${mmcdev}p${mmcpart};" \
++						"run uname_boot;" \
++					"fi;" \
++				"fi;" \
++			"done;" \
++		"fi;\0" \
++
++#define EEWIKI_SCSI_BOOT \
++	"scsi_boot=${devtype} reset ; " \
++		"if ${devtype} dev ${mmcdev}; then " \
++			"echo Scanning ${devtype} device ${mmcdev};" \
++			"setenv bootpart ${mmcdev}:1; " \
++			"echo Checking for: /uEnv.txt ...;" \
++			"if test -e ${devtype} ${bootpart} /uEnv.txt; then " \
++				"load ${devtype} ${bootpart} ${loadaddr} /uEnv.txt;" \
++				"env import -t ${loadaddr} ${filesize};" \
++				"echo Loaded environment from /uEnv.txt;" \
++				"echo Checking if uenvcmd is set ...;" \
++				"if test -n ${uenvcmd}; then " \
++					"echo Running uenvcmd ...;" \
++					"run uenvcmd;" \
++				"fi;" \
++			"fi; " \
++			"echo Checking for: /boot/uEnv.txt ...;" \
++			"for i in 1 2 3 4 ; do " \
++				"setenv mmcpart ${i};" \
++				"setenv bootpart ${mmcdev}:${mmcpart};" \
++				"if test -e ${devtype} ${bootpart} /boot/uEnv.txt; then " \
++					"load ${devtype} ${bootpart} ${loadaddr} /boot/uEnv.txt;" \
++					"env import -t ${loadaddr} ${filesize};" \
++					"echo Loaded environment from /boot/uEnv.txt;" \
++					"if test -n ${dtb}; then " \
++						"setenv fdtfile ${dtb};" \
++						"echo debug: [dtb=${fdtfile}] ...;" \
++					"fi;" \
++					"echo Checking if uname_r is set in /boot/uEnv.txt ...;" \
++					"if test -n ${uname_r}; then " \
++						"echo debug: [uname_r=${uname_r}] ...;" \
++						"setenv oldroot /dev/sda${mmcpart};" \
++						"run uname_boot;" \
++					"fi;" \
++				"fi;" \
++			"done;" \
++		"fi;\0" \
++
++#define EEWIKI_USB_BOOT \
++	"usb_boot=${devtype} reset ; " \
++		"if ${devtype} dev ${mmcdev}; then " \
++			"echo Scanning ${devtype} device ${mmcdev};" \
++			"setenv bootpart ${mmcdev}:1; " \
++			"echo Checking for: /uEnv.txt ...;" \
++			"if test -e ${devtype} ${bootpart} /uEnv.txt; then " \
++				"load ${devtype} ${bootpart} ${loadaddr} /uEnv.txt;" \
++				"env import -t ${loadaddr} ${filesize};" \
++				"echo Loaded environment from /uEnv.txt;" \
++				"echo Checking if uenvcmd is set in /uEnv.txt ...;" \
++				"if test -n ${uenvcmd}; then " \
++					"echo Running uenvcmd ...;" \
++					"run uenvcmd;" \
++				"fi;" \
++			"fi; " \
++			"echo Checking for: /boot/uEnv.txt ...;" \
++			"for i in 1 2 3 4 ; do " \
++				"setenv mmcpart ${i};" \
++				"setenv bootpart ${mmcdev}:${mmcpart};" \
++				"if test -e ${devtype} ${bootpart} /boot/uEnv.txt; then " \
++					"load ${devtype} ${bootpart} ${loadaddr} /boot/uEnv.txt;" \
++					"env import -t ${loadaddr} ${filesize};" \
++					"echo Loaded environment from /boot/uEnv.txt;" \
++					"if test -n ${dtb}; then " \
++						"setenv fdtfile ${dtb};" \
++						"echo debug: [dtb=${fdtfile}] ...;" \
++					"fi;" \
++					"echo Checking if uname_r is set in /boot/uEnv.txt ...;" \
++					"if test -n ${uname_r}; then " \
++						"echo debug: [uname_r=${uname_r}] ...;" \
++						"setenv oldroot /dev/sda${mmcpart};" \
++						"run uname_boot;" \
++					"fi;" \
++				"fi;" \
++			"done;" \
++		"fi;\0" \
++
++#define EEWIKI_UNAME_BOOT \
++	"uname_boot="\
++		"setenv bootdir /boot; " \
++		"setenv bootfile vmlinuz-${uname_r}; " \
++		"if test -e ${devtype} ${bootpart} ${bootdir}/${bootfile}; then " \
++			"echo loading ${bootdir}/${bootfile} ...; "\
++			"run loadimage;" \
++			"setenv fdtdir /boot/dtbs/${uname_r}; " \
++			"if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtfile}; then " \
++				"run loadfdt;" \
++			"else " \
++				"setenv fdtdir /usr/lib/linux-image-${uname_r}; " \
++				"if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtfile}; then " \
++					"run loadfdt;" \
++				"else " \
++					"setenv fdtdir /lib/firmware/${uname_r}/device-tree; " \
++					"if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtfile}; then " \
++						"run loadfdt;" \
++					"else " \
++						"setenv fdtdir /boot/dtb-${uname_r}; " \
++						"if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtfile}; then " \
++							"run loadfdt;" \
++						"else " \
++							"setenv fdtdir /boot/dtbs; " \
++							"if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtfile}; then " \
++								"run loadfdt;" \
++							"else " \
++								"setenv fdtdir /boot/dtb; " \
++								"if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtfile}; then " \
++									"run loadfdt;" \
++								"else " \
++									"setenv fdtdir /boot; " \
++									"if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtfile}; then " \
++										"run loadfdt;" \
++									"else " \
++										"echo; echo unable to find ${fdtfile} ...; echo booting legacy ...;"\
++										"run args_mmc;" \
++										"echo debug: [${bootargs}] ... ;" \
++										"echo debug: [bootz ${loadaddr}] ... ;" \
++										"bootz ${loadaddr}; " \
++									"fi;" \
++								"fi;" \
++							"fi;" \
++						"fi;" \
++					"fi;" \
++				"fi;" \
++			"fi; " \
++			"if test -n ${enable_uboot_overlays}; then " \
++				"setenv fdt_buffer 0x60000;" \
++				"if test -n ${uboot_fdt_buffer}; then " \
++					"setenv fdt_buffer ${uboot_fdt_buffer};" \
++				"fi;" \
++				"echo uboot_overlays: [fdt_buffer=${fdt_buffer}] ... ;" \
++				"if test -n ${uboot_overlay_addr0}; then " \
++					"if test -n ${disable_uboot_overlay_addr0}; then " \
++						"echo uboot_overlays: uboot loading of [${uboot_overlay_addr0}] disabled by /boot/uEnv.txt [disable_uboot_overlay_addr0=1]...;" \
++					"else " \
++						"setenv uboot_overlay ${uboot_overlay_addr0}; " \
++						"run virtualloadoverlay;" \
++					"fi;" \
++				"fi;" \
++				"if test -n ${uboot_overlay_addr1}; then " \
++					"if test -n ${disable_uboot_overlay_addr1}; then " \
++						"echo uboot_overlays: uboot loading of [${uboot_overlay_addr1}] disabled by /boot/uEnv.txt [disable_uboot_overlay_addr1=1]...;" \
++					"else " \
++						"setenv uboot_overlay ${uboot_overlay_addr1}; " \
++						"run virtualloadoverlay;" \
++					"fi;" \
++				"fi;" \
++				"if test -n ${uboot_overlay_addr2}; then " \
++					"if test -n ${disable_uboot_overlay_addr2}; then " \
++						"echo uboot_overlays: uboot loading of [${uboot_overlay_addr2}] disabled by /boot/uEnv.txt [disable_uboot_overlay_addr2=1]...;" \
++					"else " \
++						"setenv uboot_overlay ${uboot_overlay_addr2}; " \
++						"run virtualloadoverlay;" \
++					"fi;" \
++				"fi;" \
++				"if test -n ${uboot_overlay_addr3}; then " \
++					"if test -n ${disable_uboot_overlay_addr3}; then " \
++						"echo uboot_overlays: uboot loading of [${uboot_overlay_addr3}] disabled by /boot/uEnv.txt [disable_uboot_overlay_addr3=1]...;" \
++					"else " \
++						"setenv uboot_overlay ${uboot_overlay_addr3}; " \
++						"run virtualloadoverlay;" \
++					"fi;" \
++				"fi;" \
++				"if test -n ${uboot_overlay_addr4}; then " \
++					"setenv uboot_overlay ${uboot_overlay_addr4}; " \
++					"run virtualloadoverlay;" \
++				"fi;" \
++				"if test -n ${uboot_overlay_addr5}; then " \
++					"setenv uboot_overlay ${uboot_overlay_addr5}; " \
++					"run virtualloadoverlay;" \
++				"fi;" \
++				"if test -n ${uboot_overlay_addr6}; then " \
++					"setenv uboot_overlay ${uboot_overlay_addr6}; " \
++					"run virtualloadoverlay;" \
++				"fi;" \
++				"if test -n ${uboot_overlay_addr7}; then " \
++					"setenv uboot_overlay ${uboot_overlay_addr7}; " \
++					"run virtualloadoverlay;" \
++				"fi;" \
++				"if test -n ${uboot_overlay_pru}; then " \
++					"setenv uboot_overlay ${uboot_overlay_pru}; " \
++					"run virtualloadoverlay;" \
++				"fi;" \
++			"else " \
++				"echo uboot_overlays: add [enable_uboot_overlays=1] to /boot/uEnv.txt to enable...;" \
++			"fi;" \
++			"setenv rdfile initrd.img-${uname_r}; " \
++			"if test -e ${devtype} ${bootpart} ${bootdir}/${rdfile}; then " \
++				"echo loading ${bootdir}/${rdfile} ...; "\
++				"run loadrd;" \
++				"if test -n ${netinstall_enable}; then " \
++					"run args_netinstall; run message;" \
++					"echo debug: [${bootargs}] ... ;" \
++					"echo debug: [bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}] ... ;" \
++					"bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}; " \
++				"fi;" \
++				"if test -n ${uenv_root}; then " \
++					"run args_uenv_root;" \
++					"echo debug: [${bootargs}] ... ;" \
++					"echo debug: [bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}] ... ;" \
++					"bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}; " \
++				"fi;" \
++				"if test -n ${uuid}; then " \
++					"run args_mmc_uuid;" \
++					"echo debug: [${bootargs}] ... ;" \
++					"echo debug: [bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}] ... ;" \
++					"bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}; " \
++				"else " \
++					"run args_mmc_old;" \
++					"echo debug: [${bootargs}] ... ;" \
++					"echo debug: [bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}] ... ;" \
++					"bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}; " \
++				"fi;" \
++			"else " \
++				"if test -n ${uenv_root}; then " \
++					"run args_uenv_root;" \
++					"echo debug: [${bootargs}] ... ;" \
++					"echo debug: [bootz ${loadaddr} - ${fdtaddr}] ... ;" \
++					"bootz ${loadaddr} - ${fdtaddr}; " \
++				"fi;" \
++				"run args_mmc_old;" \
++				"echo debug: [${bootargs}] ... ;" \
++				"echo debug: [bootz ${loadaddr} - ${fdtaddr}] ... ;" \
++				"bootz ${loadaddr} - ${fdtaddr}; " \
++			"fi;" \
++		"fi;\0" \
++
+ /*
+  * The following are general good-enough settings for U-Boot.  We set a
+  * large malloc pool as we generally have a lot of DDR, and we opt for
+diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
+index de0a6af2fd..0cd2ccea03 100644
+--- a/include/configs/ti_omap5_common.h
++++ b/include/configs/ti_omap5_common.h
+@@ -64,6 +64,11 @@
+ 	DEFAULT_FIT_TI_ARGS \
+ 	DEFAULT_COMMON_BOOT_TI_ARGS \
+ 	DEFAULT_FDT_TI_ARGS \
++	EEWIKI_USB_BOOT \
++	EEWIKI_SCSI_BOOT \
++	EEWIKI_MMC_BOOT \
++	EEWIKI_UNAME_BOOT \
++	EEPROM_PROGRAMMING \
+ 	DFUARGS \
+ 	NETARGS \
+ 	NANDARGS \
+diff --git a/include/environment/ti/boot.h b/include/environment/ti/boot.h
+index a9d8f28d46..1480b6e3df 100644
+--- a/include/environment/ti/boot.h
++++ b/include/environment/ti/boot.h
+@@ -132,6 +132,7 @@
+ 	"bootpart=0:2\0" \
+ 	"bootdir=/boot\0" \
+ 	"bootfile=zImage\0" \
++	"board_eeprom_header=undefined\0" \
+ 	"usbtty=cdc_acm\0" \
+ 	"vram=16M\0" \
+ 	AVB_VERIFY_CMD \
+@@ -183,7 +184,14 @@
+ 		"else " \
+ 			"echo $apart partition not found; " \
+ 			"exit; " \
+-		"fi;\0"
++		"fi;\0 " \
++	"read_board_eeprom=" \
++		"if test $board_eeprom_header = beagle_x15_revb1_blank; then " \
++			"run eeprom_dump; run eeprom_x15_b1; reset; fi; " \
++		"if test $board_eeprom_header = beagle_x15_revc_blank; then " \
++			"run eeprom_dump; run eeprom_x15_c; reset; fi; " \
++		"if test $board_eeprom_header = bbai_a2_blank; then " \
++			"run eeprom_dump; run eeprom_bbai_a2; reset; fi;  \0 "
+ 
+ #ifdef CONFIG_OMAP54XX
+ 
+@@ -223,19 +231,17 @@
+ 			"echo WARNING: Could not determine device tree to use; fi; \0"
+ 
+ #define CONFIG_BOOTCOMMAND \
+-	"if test ${dofastboot} -eq 1; then " \
+-		"echo Boot fastboot requested, resetting dofastboot ...;" \
+-		"setenv dofastboot 0; saveenv;" \
+-		FASTBOOT_CMD \
+-	"fi;" \
+-	"if test ${boot_fit} -eq 1; then "	\
+-		"run update_to_fit;"	\
+-	"fi;"	\
++	"run read_board_eeprom; " \
+ 	"run findfdt; " \
+-	"run envboot; " \
+-	"run mmcboot;" \
+-	"run emmc_linux_boot; " \
+-	"run emmc_android_boot; " \
++	"setenv mmcdev 0; " \
++	"setenv devtype usb; " \
++	"echo usb_boot is currently disabled;" \
++	"setenv devtype scsi; " \
++	"echo scsi_boot is currently disabled;" \
++	"setenv devtype mmc; " \
++	"run mmc_boot;" \
++	"setenv mmcdev 1; " \
++	"run mmc_boot;" \
+ 	""
+ 
+ #endif /* CONFIG_OMAP54XX */
+diff --git a/include/environment/ti/mmc.h b/include/environment/ti/mmc.h
+index b86c8dc7a4..0ec09f279a 100644
+--- a/include/environment/ti/mmc.h
++++ b/include/environment/ti/mmc.h
+@@ -11,11 +11,31 @@
+ #define DEFAULT_MMC_TI_ARGS \
+ 	"mmcdev=0\0" \
+ 	"mmcrootfstype=ext4 rootwait\0" \
+-	"finduuid=part uuid mmc ${bootpart} uuid\0" \
++	"finduuid=part uuid ${devtype} ${bootpart} uuid\0" \
+ 	"args_mmc=run finduuid;setenv bootargs console=${console} " \
+ 		"${optargs} " \
+-		"root=PARTUUID=${uuid} rw " \
+-		"rootfstype=${mmcrootfstype}\0" \
++		"root=PARTUUID=${uuid} ro " \
++		"rootfstype=${mmcrootfstype} " \
++		"${cmdline}\0" \
++	"args_mmc_old=setenv bootargs console=${console} " \
++		"${optargs} " \
++		"root=${oldroot} ro " \
++		"rootfstype=${mmcrootfstype} " \
++		"${cmdline}\0" \
++	"args_mmc_uuid=setenv bootargs console=${console} " \
++		"${optargs} " \
++		"root=UUID=${uuid} ro " \
++		"rootfstype=${mmcrootfstype} " \
++		"${cmdline}\0" \
++	"args_uenv_root=setenv bootargs console=${console} " \
++		"${optargs} " \
++		"root=${uenv_root} ro " \
++		"rootfstype=${mmcrootfstype} " \
++		"${musb} ${cmdline}\0" \
++	"args_netinstall=setenv bootargs ${netinstall_bootargs} " \
++		"${optargs} " \
++		"root=/dev/ram rw " \
++		"${cmdline}\0" \
+ 	"loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+ 	"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
+ 		"source ${loadaddr}\0" \
+@@ -24,7 +44,28 @@
+ 		"env import -t ${loadaddr} ${filesize}\0" \
+ 	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile}\0" \
+ 	"loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+-	"loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
++	"loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}; setenv rdsize ${filesize}\0" \
++	"loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
++	"loadoverlay=echo uboot_overlays: loading ${actual_uboot_overlay} ...; " \
++		"load ${devtype} ${bootpart} ${rdaddr} ${actual_uboot_overlay}; " \
++		"fdt addr ${fdtaddr}; fdt resize ${fdt_buffer}; " \
++		"fdt apply ${rdaddr}; fdt resize ${fdt_buffer};\0" \
++	"virtualloadoverlay=if test -e ${devtype} ${bootpart} ${fdtdir}/overlays/${uboot_overlay}; then " \
++				"setenv actual_uboot_overlay ${fdtdir}/overlays/${uboot_overlay}; " \
++				"run loadoverlay;" \
++			"else " \
++				"if test -e ${devtype} ${bootpart} /lib/firmware/${uboot_overlay}; then " \
++					"setenv actual_uboot_overlay /lib/firmware/${uboot_overlay}; " \
++					"run loadoverlay;" \
++				"else " \
++					"if test -e ${devtype} ${bootpart} ${uboot_overlay}; then " \
++						"setenv actual_uboot_overlay ${uboot_overlay}; " \
++						"run loadoverlay;" \
++					"else " \
++						"echo uboot_overlays: unable to find [${devtype} ${bootpart} ${uboot_overlay}]...;" \
++					"fi;" \
++				"fi;" \
++			"fi;\0" \
+ 	"envboot=mmc dev ${mmcdev}; " \
+ 		"if mmc rescan; then " \
+ 			"echo SD/MMC found on device ${mmcdev};" \
+-- 
+2.20.1
+

board/beagleboard/beagleboneai/patches/uboot/uboot.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  439d3bef296effd54130be6a731c5b118be7fddd7fcc663ccbc5fb18294d8718  u-boot-2025.04.tar.bz2
+sha256  0d438b1bb5cceb57a18ea2de4a0d51f7be5b05b98717df05938636e0aadfe11a  u-boot-2021.04.tar.bz2

board/beagleboard/beagleboneai/post-build.sh

@@ -1,3 +1,4 @@
 #!/bin/sh
+BOARD_DIR="$(dirname $0)"
 
-cp board/beagleboard/beagleboneai/uEnv.txt "$BINARIES_DIR/uEnv.txt"
+cp board/beagleboard/beagleboneai/uEnv.txt $BINARIES_DIR/uEnv.txt

board/beagleboard/beagleplay/patches/arm-trusted-firmware/arm-trusted-firmware.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  c0f23ccc71c49989e9ad238acf334473c17b7c88f79a20c829c3d443e3794a22  arm-trusted-firmware-v2.11-git4.tar.gz
+sha256  7efa89e1b4e4106ee05d68e876c8efbb146364d89cfd5d26bf4647b09c08f32b  arm-trusted-firmware-v2.10-git4.tar.gz

board/beagleboard/beagleplay/patches/linux/linux.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  774698422ee54c5f1e704456f37c65c06b51b4e9a8b0866f34580d86fef8e226  linux-6.10.tar.xz
+sha256  24fa01fb989c7a3e28453f117799168713766e119c5381dac30115f18f268149  linux-6.9.tar.xz

board/beagleboard/beagleplay/patches/ti-k3-r5-loader/ti-k3-r5-loader.hash

@@ -1 +0,0 @@
-../uboot/uboot.hash

board/beagleboard/beagleplay/patches/ti-k3-r5-loader/ti-k3-r5-loader.hash

@@ -0,0 +1,2 @@
+# Locally calculated
+sha256  18a853fe39fad7ad03a90cc2d4275aeaed6da69735defac3492b80508843dd4a  u-boot-2024.04.tar.bz2

board/beagleboard/beagleplay/patches/uboot/uboot.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  f591da9ab90ef3d6b3d173766d0ddff90c4ed7330680897486117df390d83c8f  u-boot-2024.07.tar.bz2
+sha256  18a853fe39fad7ad03a90cc2d4275aeaed6da69735defac3492b80508843dd4a  u-boot-2024.04.tar.bz2

board/beagleboard/beaglev_fire/README.txt

@@ -108,12 +108,12 @@ https://docs.beagleboard.org/latest/boards/beaglev/fire/demos-and-tutorials/gate
   Unzip the downloaded artifacts.zip file.
 
   Go to the custom FPGA design directory:
-    'cd artifacts/bitstreams/my_custom_fpga_design/LinuxProgramming/'
+    'cd artifacts/bitstreams/my_custom_fpga_design'
 
   On your Linux host development computer, copy the bitstream to BeagleV-Fire
   board, replacing </path/to/your/> with the path to your BeagleV-Fire root file
   system.
-    'cp ./* /path/to/your/buildroot/board/beagleboard/beaglev_fire/rootfs-overlay/lib/firmware/'
+    'cp -r ./LinuxProgramming /path/to/your/buildroot/board/beagleboard/beaglev_fire/rootfs-overlay/etc/'
 
   To apply these changes to your image, make sure to re-build it with:
     `make`
@@ -121,7 +121,14 @@ https://docs.beagleboard.org/latest/boards/beaglev/fire/demos-and-tutorials/gate
   Then, re-flash your image - to ensure you have the necessary firmware files - by
   following the above section "Flashing the image to your eMMC".
 
-  On BeagleV-Fire initiate the reprogramming of the FPGA with your gateware bitstream:
-    `/usr/share/microchip/update-gateware.sh`
+  On BeagleV-Fire,
+    1. Make your update gateware script executable
+      'chmod +x /usr/share/microchip/update-gateware.sh'
+    2. Create a firmware directory
+      'mkdir /lib/firmware'
+    3. Change to the directory of your gateware script
+      `cd /usr/share/microchip/`
+    3. initiate the reprogramming of the FPGA with your gateware bitstream:
+      './update-gateware.sh /etc/LinuxProgramming/'
 
   Wait for a couple of minutes for the BeagleV-Fire to reprogram itself.

board/beagleboard/beaglev_fire/boot.cmd

@@ -12,5 +12,4 @@ bootm loados ${scriptaddr};
 bootm ramdisk;
 bootm prep;
 fdt set /soc/ethernet@20110000 mac-address ${beaglevfire_mac_addr0};
-run design_overlays;
 bootm go;

board/beagleboard/beaglev_fire/patches/linux/linux.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  7bd234a93bc6351d6a830f9ef18e9e780d70c478d280a6513a30bc2f945fb050  linux-linux4microchip+fpga-2024.09.1.tar.gz
+sha256  dcb7b41fd363729675c34545fcb514d5a94dbb3714ee10f527a26ca7716c2579  linux-linux4microchip+fpga-2024.06.tar.gz

board/beagleboard/beaglev_fire/patches/uboot/uboot.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  a2fad7fe7f933fa4679b070e952e1e7a21dbd8b586d7a9a11bfcb99e75ae7ad6  uboot-linux4microchip+fpga-2024.09.tar.gz
+sha256  d461c45a9c5acd019776cdcf8ab2b571315282a880dd6580431f7dd5bfac3889  uboot-linux4microchip+fpga-2024.06.tar.gz

board/beagleboard/beaglev_fire/rootfs-overlay/usr/share/microchip/update-gateware.sh

@@ -1,66 +1,32 @@
 #!/bin/sh
 
-if [ $# -eq 0 ]; then
-    echo "No gateware location provided. Checking default location."
-    if [ ! -e /lib/firmware/mpfs_bitstream.spi ]; then
+if [ ! -e "$1"/mpfs_bitstream.spi ]; then
         echo "No gateware file found."
         exit 1
-    fi
-else
-    echo "Gateware location provided: $1"
-    if [ ! -e "$1"/mpfs_bitstream.spi ]; then
-        echo "No gateware file found."
-        exit 1
-    else
-        if [ ! -d /lib/firmware ]; then
-            mkdir /lib/firmware
-        fi
-        cp "$1"/mpfs_dtbo.spi /lib/firmware/mpfs_dtbo.spi
-        cp "$1"/mpfs_bitstream.spi /lib/firmware/mpfs_bitstream.spi
-    fi
 fi
 
+if [ ! -d /lib/firmware ]
+then
+    mkdir /lib/firmware
+fi
+
+cp "$1"/mpfs_dtbo.spi /lib/firmware/mpfs_dtbo.spi
+cp "$1"/mpfs_bitstream.spi /lib/firmware/mpfs_bitstream.spi
+
+mount -t debugfs none /sys/kernel/debug
+
 # Trash existing device tree overlay in case the rest of the process fails:
-flash_erase /dev/mtd0 0 16
+flash_erase /dev/mtd0 0 1024
 
-# Initiate FPGA update for dtbo
-echo 1 > /sys/class/firmware/mpfs-auto-update/loading
-
-# Write device tree overlay
-cat /lib/firmware/mpfs_dtbo.spi > /sys/class/firmware/mpfs-auto-update/data
-
-# Signal completion for dtbo load
-echo 0 > /sys/class/firmware/mpfs-auto-update/loading
-
-while [ "$(cat /sys/class/firmware/mpfs-auto-update/status)" != "idle" ]; do
-    # Do nothing, just keep checking
-    sleep 1
-done
+# # Write device tree overlay
+dd if=/lib/firmware/mpfs_dtbo.spi of=/dev/mtd0 seek=1024
 
 # Fake the presence of a golden image for now.
-dd if=/dev/zero of=/dev/mtd0 count=1 bs=4
+dd if=/dev/zero of=/dev/mtd0 count=4 bs=1
 
-# Initiate FPGA update for bitstream
-echo 1 > /sys/class/firmware/mpfs-auto-update/loading
+# Initiate FPGA update.
+echo 1 > /sys/kernel/debug/fpga/microchip_exec_update
 
-# Write the firmware image to the data sysfs file
-cat /lib/firmware/mpfs_bitstream.spi > /sys/class/firmware/mpfs-auto-update/data
-
-# Signal completion for bitstream load
-echo 0 > /sys/class/firmware/mpfs-auto-update/loading
-
-while [ "$(cat /sys/class/firmware/mpfs-auto-update/status)" != "idle" ]; do
-    # Do nothing, just keep checking
-    sleep 1
-done
-
-# When the status is 'idle' and no error has occured, reboot the system for
-# the gateware update to take effect. FPGA reprogramming takes places between
-# Linux shut-down and HSS restarting the board.
-if [ "$(cat /sys/class/firmware/mpfs-auto-update/error)" = "" ]; then
-    echo "FPGA update ready. Rebooting."
-    reboot
-else
-    echo "FPGA update failed with status: $(cat /sys/class/firmware/mpfs-auto-update/error)"
-    exit 1
-fi
+# Reboot Linux for the gateware update to take effect.
+# FPGA reprogramming takes places between Linux shut-down and HSS restarting the board.
+reboot

board/beagleboard/beagley-ai/extlinux.conf

@@ -1,5 +0,0 @@
-default buildroot
-label buildroot
-   kernel /Image
-   devicetreedir /
-append root=/dev/mmcblk1p2 rootwait rw console=ttyS2,115200n8

board/beagleboard/beagley-ai/patches/linux/linux.hash

@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  2bb586c954277d070c8fdf6d7275faa93b4807d9bf3353b491d8149cca02b4fc  linux-6.15.6.tar.xz

board/beagleboard/beagley-ai/patches/ti-k3-r5-loader/ti-k3-r5-loader.hash

@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  0f933f6c5a426895bf306e93e6ac53c60870e4b54cda56d95211bec99e63bec7  u-boot-2025.07.tar.bz2

board/beagleboard/beagley-ai/patches/uboot/uboot.hash

@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  0f933f6c5a426895bf306e93e6ac53c60870e4b54cda56d95211bec99e63bec7  u-boot-2025.07.tar.bz2

board/beagleboard/beagley-ai/post-build.sh

@@ -1,5 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname "$0")"
-
-install -m 0644 -D "$BOARD_DIR"/extlinux.conf "$BINARIES_DIR"/extlinux/extlinux.conf

board/beagleboard/beagley-ai/readme.txt

@@ -1,38 +0,0 @@
-BeagleBoard.org BeagleY-AI Development Board
-
-Description
-===========
-
-This configuration will build a basic image for the BeagleBoard.org
-BeagleY-AI. For more details about the board, visit:
-
-https://www.beagleboard.org/boards/beagley-ai
-
-How to Build
-============
-
-Select the default configuration for the target:
-
-$ make beagley_ai_defconfig
-
-Optional: modify the configuration:
-
-$ make menuconfig
-
-Build:
-
-$ make
-
-To copy the resulting output image file to an SD card use dd:
-
-$ dd if=output/images/sdcard.img of=/dev/sdX bs=1M
-
-How to Run
-==========
-
-Insert the SD card into the BeagleY-AI board, and power it up
-through the USB Type-C connector. The system should come up.
-You can use a USB to serial adapter to connect to the connector
-labeled UART0 (J13) to communicate with the board.
-
-https://docs.beagle.cc/boards/beagley/ai/02-quick-start.html

board/beelink/gs1/extlinux.conf

@@ -0,0 +1,4 @@
+label linux
+  kernel /Image
+  devicetree /sun50i-h6-beelink-gs1.dtb
+  append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait

board/beelink/gs1/genimage.cfg

@@ -1,15 +1,10 @@
 image boot.vfat {
 	vfat {
 		files = {
-			"tiboot3.bin",
-			"tispl.bin",
-			"u-boot.img",
 			"Image",
-			"ti",
-			"extlinux",
+			"sun50i-h6-beelink-gs1.dtb",
+			"extlinux"
 		}
-
-		label = "boot"
 	}
 
 	size = 64M
@@ -20,6 +15,13 @@ image sdcard.img {
 	}
 
 	partition u-boot {
+		in-partition-table = "no"
+		image = "u-boot-sunxi-with-spl.bin"
+		offset = 8K
+		size = 1016K # 1MB - 8KB
+	}
+
+	partition boot {
 		partition-type = 0xC
 		bootable = "true"
 		image = "boot.vfat"

board/beelink/gs1/post-build.sh

@@ -0,0 +1,4 @@
+#!/bin/sh
+BOARD_DIR="$(dirname $0)"
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf

board/bsh/common/imx8mn-bsh-smm-s2/patches/arm-trusted-firmware/arm-trusted-firmware.hash

@@ -0,0 +1,2 @@
+# Locally calculated
+sha256  7efa89e1b4e4106ee05d68e876c8efbb146364d89cfd5d26bf4647b09c08f32b  arm-trusted-firmware-v2.10-git4.tar.gz

board/bsh/common/imx8mn-bsh-smm-s2/patches/linux/linux.hash

@@ -1,2 +1,2 @@
-# From https://cdn.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc
-sha256  55432b2af352f7bf3053c348d8549df2f2deeaa4a361c65d638c2f3b2ca7ec96  linux-6.12.56.tar.xz
+# Locally calculated
+sha256  774698422ee54c5f1e704456f37c65c06b51b4e9a8b0866f34580d86fef8e226  linux-6.10.tar.xz

board/bsh/common/imx8mn-bsh-smm-s2/patches/uboot/uboot.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  0f933f6c5a426895bf306e93e6ac53c60870e4b54cda56d95211bec99e63bec7  u-boot-2025.07.tar.bz2
+sha256  f591da9ab90ef3d6b3d173766d0ddff90c4ed7330680897486117df390d83c8f  u-boot-2024.07.tar.bz2

board/bsh/imx6ulz-bsh-smm-m2/nand-full.lst

@@ -25,8 +25,6 @@ SDPV: jump
 
 FB: ucmd setenv fastboot_buffer ${loadaddr}
 FB[-t 60000]: ucmd nand erase.chip
-FB: download -f _image
-FB: ucmd nandbcb init ${fastboot_buffer} nandboot ${filesize}
 FB[-t 60000]: ucmd ubi part rootfs
 FB[-t 60000]: ucmd ubi create root -
 FB: download -f _filesystem

board/bsh/imx6ulz-bsh-smm-m2/patches/linux/linux.hash

@@ -1,2 +1,2 @@
-# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc
-sha256  55432b2af352f7bf3053c348d8549df2f2deeaa4a361c65d638c2f3b2ca7ec96  linux-6.12.56.tar.xz
+# Locally calculated
+sha256  365ff26a30e206de9b18489f45d38582a0a61b7c5919f8ab89295a47316784e1  linux-6.1.68.tar.xz

board/bsh/imx6ulz-bsh-smm-m2/patches/uboot/uboot.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  0f933f6c5a426895bf306e93e6ac53c60870e4b54cda56d95211bec99e63bec7  u-boot-2025.07.tar.bz2
+sha256  e00e6c6f014e046101739d08d06f328811cebcf5ae101348f409cbbd55ce6900  u-boot-2023.10.tar.bz2

board/bsh/imx8mn-bsh-smm-s2/nand-full.lst

@@ -10,8 +10,6 @@ SDPS: boot -f _flash.bin
 
 FB: ucmd setenv fastboot_buffer ${loadaddr}
 FB: download -f _image
-FB[-t 10000]: ucmd nand erase.chip
-
 # Burn image to nandfit partition if needed
 FB: ucmd if env exists nandfit_part; then nand erase.part nandfit; nand write ${fastboot_buffer} nandfit ${filesize}; else true; fi;
 FB: ucmd nandbcb init ${fastboot_buffer} nandboot ${filesize}

board/canaan/k210-soc/rootfs_overlay/init

@@ -0,0 +1 @@
+/sbin/init

board/canaan/k210-soc/rootfs_overlay/sbin/init

@@ -11,7 +11,7 @@
 # When the kernel is directly booted, devtmpfs is not automatically mounted.
 # Manually mount it if needed.
 devmnt=$(mount | grep -c devtmpfs)
-if [ "${devmnt}" -eq 0 ]; then
+if [ ${devmnt} -eq 0 ]; then
     /bin/mount -t devtmpfs devtmpfs /dev
 fi
 
@@ -28,5 +28,14 @@ fi
 # Clear memory to reduce page fragmentation
 echo 3 > /proc/sys/vm/drop_caches
 
+# Print a fun logo :)
+echo "          __  _"
+echo "         / / (_) ____   _   _ __  __"
+echo "        / /  | ||  _ \\ | | | |\\ \\/ /"
+echo "       / /___| || | | || |_| | >  < "
+echo "      /_____/|_||_| |_| \\____|/_/\\_\\"
+echo "    64-bits RISC-V Kendryte K210 NOMMU"
+echo ""
+
 # Finally, let's start an interactive shell
 exec /bin/sh

board/chromebook/snow/kernel.args

@@ -0,0 +1 @@
+console=tty1 clk_ignore_unused root=/dev/mmcblk1p2 rootfstype=ext4 ro

board/chromebook/snow/kernel.its

@@ -0,0 +1,37 @@
+/dts-v1/;
+
+/ {
+    description = "Buildroot kernel for Chromebook Snow";
+    images {
+        kernel@1 {
+            description = "kernel";
+            data = /incbin/("zImage");
+            type = "kernel_noload";
+            arch = "arm";
+            os = "linux";
+            compression = "none";
+            load = <0>;
+            entry = <0>;
+            hash@1 {
+                algo = "sha1";
+            };
+        };
+        fdt@1{
+            description = "exynos5250-snow.dtb";
+            data = /incbin/("exynos5250-snow.dtb");
+            type = "flat_dt";
+            arch = "arm";
+            compression = "none";
+            hash@1 {
+                algo = "sha1";
+            };
+        };
+    };
+    configurations {
+        default = "conf@1";
+        conf@1{
+            kernel = "kernel@1";
+            fdt = "fdt@1";
+        };
+    };
+};

board/chromebook/snow/linux-4.15.fragment

@@ -0,0 +1,2 @@
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m

board/chromebook/snow/patches/linux/0001-linux-4.15-dts-tpm.patch

@@ -0,0 +1,30 @@
+Some versions of u-boot for this Chromebook check for tpm node
+in the device tree and fail badly (reboot) if it is not found.
+
+While not exactly correct, it is much easier to patch the mainline
+device tree to match u-boot expectations than to fix u-boot on
+this device.
+
+See https://code.google.com/p/chromium/issues/detail?id=220169
+and https://lkml.org/lkml/2013/3/4/242
+
+Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
+Upstream: Not Applicable
+[yann.morin.1998@free.fr: add Upstream tag]
+Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
+
+--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
++++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+@@ -466,6 +466,11 @@
+ 	status = "okay";
+ 	samsung,i2c-sda-delay = <100>;
+ 	samsung,i2c-max-bus-freq = <66000>;
++
++	tpm {
++		compatible = "infineon,slb9635tt";
++		reg = <0x20>;
++	};
+ };
+ 
+ &i2c_5 {
+

board/chromebook/snow/patches/linux/linux.hash

@@ -0,0 +1,2 @@
+# Localy computed
+sha256  5a26478906d5005f4f809402e981518d2b8844949199f60c4b6e1f986ca2a769  linux-4.15.tar.xz

board/chromebook/snow/readme.txt

@@ -0,0 +1,137 @@
+Samsung XE303C12 aka Chromebook Snow
+====================================
+
+This file describes booting the Chromebook from an SD card containing
+Buildroot kernel and rootfs, using the original bootloader. This is
+the least invasive way to get Buildroot onto the devices and a good
+starting point.
+
+The bootloader will only boot a kernel from a GPT partition marked
+bootable with cgpt tool from vboot-utils package.
+The kernel image must be signed using futility from the same package.
+The signing part is done by sign.sh script in this directory.
+
+It does not really matter where rootfs is as long as the kernel is able
+to find it, but this particular configuration assumes the kernel is on
+partition 1 and rootfs is on partition 2 of the SD card.
+Make sure to check kernel.args if you change this.
+
+Making the boot media
+---------------------
+Start by configuring and building the images.
+
+	make chromebook_snow_defconfig
+	make menuconfig # if necessary
+	make
+
+The important files are:
+
+	uImage.kpart (kernel and device tree, signed)
+	rootfs.tar
+	bootsd.img (SD card image containing both kernel and rootfs)
+
+Write the image directly to some SD card.
+WARNING: make sure there is nothing important on that card,
+and double-check the device name!
+
+	SD=/dev/mmcblk1		# may be /dev/sdX on some hosts
+	dd if=output/images/bootsd.img of=$SD
+
+Switching to developer mode and booting from SD
+-----------------------------------------------
+Power Chromebook down, then power it up while holding Esc+F3.
+BEWARE: switching to developer mode deletes all user data.
+Create backups if you need them.
+
+While in developer mode, Chromebook will boot into a white screen saying
+"OS verification is off".
+
+Press Ctrl-D at this screen to boot Chromium OS from eMMC.
+Press Ctrl-U at this screen to boot from SD (or USB)
+Press Power to power it off.
+Do NOT press Space unless you mean it.
+This will switch it back to normal mode.
+
+The is no way to get rid of the white screen without re-flashing the bootloader.
+
+Troubleshooting
+---------------
+Loud *BEEP* after pressing Ctrl-U means there's no valid partition to boot from.
+Which in turn means either bad GPT or improperly signed kernel.
+
+Return to the OS verification screen without any sounds means the code managed
+to reboot the board. May indicate properly signed but invalid image.
+
+Blank screen means the image is valid and properly signed but cannot boot
+for some reason, like missing or incorrect DT.
+
+In case the board becomes unresponsive:
+
+* Press Esc+F3+Power. The board should reboot instantly.
+  Remove SD card to prevent it from attempting a system recovery.
+
+* Hold Power button for around 10s. The board should shut down into
+  its soft-off mode. Press Power button again or open the lid to turn in on.
+
+* If that does not work, disconnect the charger and push a hidden
+  button on the underside with a pin of some sort. The board should shut
+  down completely. Opening the lid and pressing Power button will not work.
+  To turn it back on, connect the charger.
+
+Partitioning SD card manually
+-----------------------------
+Check mksd.sh for partitioning commands.
+
+Use parted and cgpt on a real device, and calculate the partition
+sizes properly. The kernel partition may be as small as 4MB, but
+you will probably want the rootfs to occupy the whole remaining space.
+
+cgpt may be used to check current layout:
+
+	output/host/bin/cgpt show $SD
+
+All sizes and all offsets are in 512-byte blocks.
+
+Writing kernel and rootfs to a partitioned SD card
+--------------------------------------------------
+Write .kpart directly to the bootable partition:
+
+	dd if=output/images/uImage.kpart of=${SD}1
+
+Make a new filesystem on the rootfs partition, and unpack rootfs.tar there:
+
+	mkfs.ext4 ${SD}2
+	mount ${SD2} /mnt/<ROOTFS-PARTITION>
+	tar -xvf output/images/rootfs.tar -C /mnt/<ROOTFS-PARTITION>
+	umount /mnt/<ROOTFS-PARTITION>
+
+This will require root permissions even if you can write to $SD.
+
+Kernel command line
+-------------------
+The command line is taken from board/chromebook/snow/kernel.args and stored
+in the vboot header (which also holds the signature).
+
+The original bootloader prepends "cros_secure console= " to the supplied
+command line. The only way to suppress this is to enable CMDLINE_FORCE
+in the kernel config, disabling external command line completely.
+
+That's not necessary however. The mainline kernel ignores cros_secure,
+and supplying console=tty1 in kernel.args undoes the effect of console=
+
+Booting with console= suppresses all kernel output.
+As a side effect, it makes /dev/console unusable, which the init in use must
+be able to handle.
+
+WiFi card
+---------
+Run modprobe mwifiex_sdio to load the driver.
+The name of the device should be mlan0.
+
+Further reading
+---------------
+https://www.chromium.org/chromium-os/developer-information-for-chrome-os-devices/samsung-arm-chromebook
+http://linux-exynos.org/wiki/Samsung_Chromebook_XE303C12/Installing_Linux
+http://archlinuxarm.org/platforms/armv7/samsung/samsung-chromebook
+http://www.de7ec7ed.com/2013/05/application-processor-ap-uart-samsung.html
+http://www.de7ec7ed.com/2013/05/embedded-controller-ec-uart-samsung.html

board/chromebook/snow/sign.sh

@@ -0,0 +1,41 @@
+#!/bin/sh
+
+# This script creates u-boot FIT image containing the kernel and the DT,
+# then signs it using futility from vboot-utils.
+# The resulting file is called uImage.kpart.
+
+BOARD_DIR=$(dirname $0)
+mkimage=$HOST_DIR/bin/mkimage
+futility=$HOST_DIR/bin/futility
+devkeys=$HOST_DIR/share/vboot/devkeys
+
+run() { echo "$@"; "$@"; }
+die() { echo "$@" >&2; exit 1; }
+test -f $BINARIES_DIR/zImage || \
+	die "No kernel image found"
+test -x $mkimage || \
+	die "No mkimage found (host-uboot-tools has not been built?)"
+test -x $futility || \
+	die "No futility found (host-vboot-utils has not been built?)"
+
+# kernel.its references zImage and exynos5250-snow.dtb, and all three
+# files must be in current directory for mkimage.
+run cp $BOARD_DIR/kernel.its $BINARIES_DIR/kernel.its || exit 1
+echo "# entering $BINARIES_DIR for the next command"
+(cd $BINARIES_DIR && run $mkimage -f kernel.its uImage.itb) || exit 1
+
+# futility requires non-empty file to be supplied with --bootloader
+# even if it does not make sense for the target platform.
+echo > $BINARIES_DIR/dummy.txt
+
+run $futility vbutil_kernel \
+	--keyblock $devkeys/kernel.keyblock \
+	--signprivate $devkeys/kernel_data_key.vbprivk \
+	--arch arm \
+	--version 1 \
+	--config $BOARD_DIR/kernel.args \
+	--vmlinuz $BINARIES_DIR/uImage.itb \
+	--bootloader $BINARIES_DIR/dummy.txt \
+	--pack $BINARIES_DIR/uImage.kpart || exit 1
+
+rm -f $BINARIES_DIR/kernel.its $BINARIES_DIR/dummy.txt

board/coolpi/coolpi-4b/extlinux.conf

@@ -1,4 +0,0 @@
-label coolpi-4b-buildroot
-  kernel /Image.gz
-  devicetree /rk3588s-coolpi-4b.dtb
-  append root=/dev/mmcblk1p2 rw rootfstype=ext4 earlycon earlyprintk console=ttyS2,1500000n8 rootwait

board/coolpi/coolpi-4b/genimage.cfg

@@ -1,35 +0,0 @@
-# SD card image for Cool PI 4b
-
-image boot.vfat {
-	vfat {
-		files = {
-			"Image.gz",
-			"rk3588s-coolpi-4b.dtb",
-			"extlinux"
-		}
-	}
-	size = 32M
-}
-
-image sdcard.img {
-	hdimage {
-		partition-table-type = "hybrid"
-	}
-
-	partition uboot {
-		in-partition-table = "false"
-		image = "u-boot-rockchip.bin"
-		offset = 32K
-	}
-
-	partition boot {
-		partition-type = "0xC"
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext2"
-	}
-}

board/coolpi/coolpi-4b/patches/linux/linux.hash

@@ -1,2 +0,0 @@
-# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc
-sha256  de8b97cfeae74c22f832ee4ca2333c157cc978d98baa122f0ee9c01796a2fe43  linux-6.14.10.tar.xz

board/coolpi/coolpi-4b/patches/uboot/uboot.hash

@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  439d3bef296effd54130be6a731c5b118be7fddd7fcc663ccbc5fb18294d8718  u-boot-2025.04.tar.bz2

board/coolpi/coolpi-4b/post-image.sh

@@ -1,7 +0,0 @@
-#!/usr/bin/env bash
-set -e
-
-BOARD_DIR="$(dirname "$0")"
-gzip -fk "${BINARIES_DIR}/Image"
-install -m 0644 -D "$BOARD_DIR/extlinux.conf" "$BINARIES_DIR/extlinux/extlinux.conf"
-support/scripts/genimage.sh -c board/coolpi/coolpi-4b/genimage.cfg

board/coolpi/coolpi-4b/readme.txt

@@ -1,57 +0,0 @@
-Cool Pi 4B
-==============
-https://www.cool-pi.com/product/cp4b/
-
-Build:
-======
-  $ make coolpi_4b_defconfig
-  $ make
-
-Files created in output directory
-=================================
-
-output/images
-.
-output/images/
-├── boot.vfat
-├── extlinux
-│   └── extlinux.conf
-├── Image
-├── Image.gz
-├── rk3588_bl31_v1.40.elf
-├── rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.12.bin
-├── rk3588s-coolpi-4b.dtb
-├── rootfs.ext2
-├── rootfs.ext4 -> rootfs.ext2
-├── rootfs.tar
-├── sdcard.img
-├── u-boot.bin
-└── u-boot-rockchip.bin
-
-Creating bootable SD card:
-==========================
-
-Simply invoke (as root)
-
-sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
-
-Where X is your SD card device.
-
-Booting:
-========
-
-Serial console:
----------------
-The Cool Pi 4B has a 40-pin GPIO header.
-
-The Uart pins are as follows:
-
-pin 6:  gnd
-pin 8:  tx
-pin 10: rx
-
-Baudrate for this board is 1500000.
-
-Login:
-------
-Enter 'root' as login user, and the prompt is ready.

board/cubietech/cubieboard1/patches/linux/linux.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  b4850cf670a032c70f38b713a27d62046c5f747caf028c5f50b18f98606a9eb1  linux-6.12.52.tar.xz
+sha256  19b31956d229b5b9ca5671fa1c74320179682a3d8d00fc86794114b21da86039  linux-6.8.12.tar.xz

board/cubietech/cubieboard1/patches/uboot/uboot.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  439d3bef296effd54130be6a731c5b118be7fddd7fcc663ccbc5fb18294d8718  u-boot-2025.04.tar.bz2
+sha256  18a853fe39fad7ad03a90cc2d4275aeaed6da69735defac3492b80508843dd4a  u-boot-2024.04.tar.bz2

board/cubietech/cubieboard1/rootfs_overlay/boot/extlinux/extlinux.conf

@@ -1,4 +1,5 @@
-label cubieboard-buildroot
-  kernel /boot/zImage
-  devicetree /boot/sun4i-a10-cubieboard.dtb
-  append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p1 rootwait
+DEFAULT linux
+LABEL linux
+  KERNEL /boot/zImage
+  DEVICETREE /boot/sun4i-a10-cubieboard.dtb
+  APPEND console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p1 rootwait

board/cubietech/cubieboard2/boot.cmd

@@ -0,0 +1,5 @@
+setenv fdt_high ffffffff
+setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
+fatload mmc 0 $kernel_addr_r zImage
+fatload mmc 0 $fdt_addr_r sun7i-a20-cubieboard2.dtb
+bootz $kernel_addr_r - $fdt_addr_r

board/cubietech/cubieboard2/genimage.cfg

@@ -1,3 +1,18 @@
+# Minimal SD card image for the Cubieboard2
+# Based in the Orange Pi genimage.cfg
+
+image boot.vfat {
+	vfat {
+		files = {
+			"zImage",
+			"sun7i-a20-cubieboard2.dtb",
+			"boot.scr"
+		}
+	}
+
+	size = 10M
+}
+
 image sdcard.img {
 	hdimage {
 	}
@@ -9,8 +24,15 @@ image sdcard.img {
 		size = 1016K # 1MB - 8KB
 	}
 
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
 	partition rootfs {
 		partition-type = 0x83
 		image = "rootfs.ext4"
+		size = 512M
 	}
 }

board/cubietech/cubieboard2/patches/linux-headers/linux-headers.hash

@@ -1 +0,0 @@
-../linux/linux.hash

board/cubietech/cubieboard2/patches/linux/linux.hash

@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  b4850cf670a032c70f38b713a27d62046c5f747caf028c5f50b18f98606a9eb1  linux-6.12.52.tar.xz

board/cubietech/cubieboard2/patches/uboot/uboot.hash

@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  439d3bef296effd54130be6a731c5b118be7fddd7fcc663ccbc5fb18294d8718  u-boot-2025.04.tar.bz2

board/cubietech/cubieboard2/post-image.sh

@@ -0,0 +1,16 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname $0)"
+GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage                           \
+	--rootpath "${TARGET_DIR}"     \
+	--tmppath "${GENIMAGE_TMP}"    \
+	--inputpath "${BINARIES_DIR}"  \
+	--outputpath "${BINARIES_DIR}" \
+	--config "${GENIMAGE_CFG}"
+
+exit $?

board/cubietech/cubieboard2/rootfs_overlay/boot/extlinux/extlinux.conf

@@ -1,4 +0,0 @@
-label cubieboard-buildroot
-  kernel /boot/zImage
-  devicetree /boot/sun7i-a20-cubieboard2.dtb
-  append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p1 rootwait

board/embest/riotboard/genimage.cfg

@@ -0,0 +1,17 @@
+image sdcard.img {
+	hdimage {
+	}
+
+	partition u-boot {
+		in-partition-table = "no"
+		image = "u-boot.imx"
+		offset = 1K
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext2"
+		offset = 1M
+		size = 60M
+	}
+}

board/embest/riotboard/readme.txt

@@ -0,0 +1,38 @@
+Buildroot for Embest RIoTboard
+==============================
+
+This is a small development board, based on Freescale IMX6 Solo SoC
+(single core ARM Cortex-A9).
+
+More details about the board can be found at:
+
+  http://www.embest-tech.com/riotboard
+
+1. Compiling buildroot
+----------------------
+
+$ make riotboard_defconfig
+$ make
+
+2. Installing buildroot
+-----------------------
+
+Prepare an SD-card and plug it into your card reader. Always double
+check the block device before writing to it, as writing to the wrong
+block device can cause irrecoverable data loss. Now you can write the
+image to your SD-card:
+
+sudo dd if=output/images/sdcard.img of=/dev/<sdcard-block-device> bs=1M
+
+3. Running buildroot
+--------------------
+
+Position the board so you can read the label "RIoTboard" on the right
+side of SW1 DIP switches. Configure the SW1 swiches like this:
+
+1   0  1   0   0  1   0  1
+ON OFF ON OFF OFF ON OFF ON
+
+Now plug your prepared SD-card in slot J6. Connect a serial console
+(115200, 8, N, 1) to header J18. Connect a 5V/1A power supply to the
+board and enjoy.

board/embest/riotboard/rootfs_overlay/boot/extlinux/extlinux.conf

@@ -0,0 +1,6 @@
+default buildroot
+
+label buildroot
+kernel /boot/zImage
+devicetree /boot/imx6dl-riotboard.dtb
+append console=ttymxc1,115200 root=/dev/mmcblk1p1 rw

board/engicam/geam6ul/genimage.cfg

@@ -0,0 +1,39 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"uImage",
+			"imx6ul-geam-kit.dtb"
+		}
+	}
+
+	size = 64M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition SPL {
+		in-partition-table = "no"
+		image = "SPL"
+		offset = 1K
+	}
+
+	partition u-boot-dtb {
+		in-partition-table = "no"
+		image = "u-boot-dtb.img"
+		offset = 69K
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+		offset = 8M
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext2"
+	}
+}

board/engicam/geam6ul/readme.txt

@@ -0,0 +1,66 @@
+********************************************
+Buildroot for Engicam GEAM6UL SOM platforms:
+********************************************
+
+This file documents the Buildroot support for all Engicam GEAM6UL
+SOM platform boards.
+
+GEAM6UL SOM Starter kits:
+https://www.engicam.com/vis-prod/101115
+
+This configuration uses U-Boot mainline and kernel mainline.
+
+Build
+=====
+
+First, configure Buildroot for the Engicam GEAM6UL SOM:
+
+- for GEAM6UL SOM:
+
+  make engicam_imx6ul_geam_defconfig
+
+Build all components:
+
+  make
+
+You will find the following files in output/images/:
+  - imx6ul-geam-kit.dtb
+  - rootfs.ext4
+  - rootfs.tar
+  - sdcard.img
+  - SPL
+  - u-boot-dtb.img
+  - uImage
+
+Create a bootable SD card
+=========================
+
+To determine the device associated to the SD card have a look in the
+/proc/partitions file:
+
+  cat /proc/partitions
+
+Buildroot prepares a bootable "sdcard.img" image in the output/images/
+directory, ready to be dumped on a SD card. Launch the following
+command as root:
+
+  dd if=output/images/sdcard.img of=/dev/<your-sd-device>
+  sync
+
+*** WARNING! This will destroy all the card content. Use with care! ***
+
+For details about the medium image layout, see the definition in
+board/engicam/geam6ul/genimage.cfg
+
+Boot the GEAM6UL boards with SD boot:
+====================================
+
+To boot your newly created system:
+- insert the SD card in the SD slot of the board;
+- connect 3-wire RS232 serial port J28 on board, and connect with other
+  serial end or USB cable(if serial-to-usb converter used) using
+  a terminal emulator at 115200 bps, 8n1;
+- close JM3 for sd boot.
+- power on the board.
+
+Enjoy!

board/engicam/icorem6/genimage.cfg

@@ -0,0 +1,42 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"uImage",
+			"imx6dl-icore.dtb",
+			"imx6q-icore.dtb",
+			"imx6q-icore-ofcap10.dtb",
+			"imx6q-icore-ofcap12.dtb"
+		}
+	}
+
+	size = 64M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition SPL {
+		in-partition-table = "no"
+		image = "SPL"
+		offset = 1K
+	}
+
+	partition u-boot-dtb {
+		in-partition-table = "no"
+		image = "u-boot-dtb.img"
+		offset = 69K
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+		offset = 8M
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext2"
+	}
+}

board/engicam/icorem6/linux_qt5.fragment

@@ -0,0 +1,4 @@
+# Currently kernel mainline exhibits issues when running cpufreq as ondemand
+# governor on mx6.
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y

board/engicam/icorem6/readme.txt

@@ -0,0 +1,93 @@
+*********************************************
+Buildroot for Engicam i.CoreM6 SOM platforms:
+*********************************************
+
+This file documents the Buildroot support for Engicam i.CoreM6
+platform boards.
+
+i.CoreM6 Quad/Dual/DualLite/Solo SOM Starter kits:
+https://www.engicam.com/vis-prod/101120
+i.CoreM6 Quad/Dual/DualLite/Solo Open Frame 10.1 C.TOUCH kits:
+https://www.engicam.com/vis-prod/101133
+
+This configuration uses U-Boot mainline and kernel mainline.
+
+Build
+=====
+
+First, configure Buildroot for the Engicam i.CoreM6:
+
+  make engicam_imx6qdl_icore_defconfig
+
+Build all components:
+
+  make
+
+You will find the following files in output/images/:
+  - imx6q-icore.dtb (for i.CoreM6 Quad/Dual)
+  - imx6dl-icore.dtb (for i.CoreM6 DualLite/Solo)
+  - imx6q-icore-ofcap10.dtb (for i.CoreM6 Quad/Dual ofcap 10)
+  - imx6q-icore-ofcap12.dtb (for i.CoreM6 Quad/Dual ofcap 12)
+  - rootfs.ext4
+  - rootfs.tar
+  - sdcard.img
+  - SPL
+  - u-boot-dtb.img
+  - uImage
+
+Create a bootable SD card
+=========================
+
+To determine the device associated to the SD card have a look in the
+/proc/partitions file:
+
+  cat /proc/partitions
+
+Buildroot prepares a bootable "sdcard.img" image in the output/images/
+directory, ready to be dumped on a SD card. Launch the following
+command as root:
+
+  dd if=output/images/sdcard.img of=/dev/<your-sd-device>
+  sync
+
+*** WARNING! This will destroy all the card content. Use with care! ***
+
+For details about the medium image layout, see the definition in
+board/engicam/icorem6/genimage.cfg
+
+Boot the i.CoreM6 boards with SD boot:
+=====================================
+
+To boot your newly created system:
+- insert the SD card in the SD slot of the board;
+- connect 3-wire RS232 serial port J28 on board, and connect with other
+  serial end or USB cable(if serial-to-usb converter used) using
+  a terminal emulator at 115200 bps, 8n1;
+- close JM3 for sd boot.
+- power on the board.
+
+Testing graphics on i.CoreM6:
+============================
+
+Build with support for Etnaviv, Qt5 and demo applications:
+
+  make engicam_imx6qdl_icore_qt5_defconfig
+  make
+
+Running kmscube
+# kmscube -D /dev/dri/card1
+
+Running glmark2-es2-drm
+# glmark2-es2-drm
+
+Running Qt5 Cinematic Demo:
+- for i.CoreM6 Starter Kit
+# export QT_QPA_EGLFS_KMS_CONFIG=/root/imx6qdl-icore.json
+- for i.CoreM6 ofcap10
+# export QT_QPA_EGLFS_KMS_CONFIG=/root/imx6qdl-icore-ofcap10.json
+- for i.CoreM6 ofcap12
+# export QT_QPA_EGLFS_KMS_CONFIG=/root/imx6qdl-icore-ofcap12.json
+
+# CinematicExperience-demo
+
+Enjoy!

board/engicam/icorem6/rootfs_overlay/root/imx6qdl-icore-ofcap10.json

@@ -0,0 +1,11 @@
+{
+  "device": "/dev/dri/card1",
+  "hwcursor": false,
+  "pbuffers": true,
+  "outputs": [
+    {
+      "name": "LVDS1",
+      "mode": "1280x800"
+    }
+  ]
+}