Update for 2023.11.1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
package/micropython: add MICROPYTHON_CPE_ID_VENDOR
2024-01-15 11:21:09 +01:00 · 2024-01-14 23:24:38 +01:00 · 2024-01-14 22:29:15 +01:00 · 2024-01-14 22:22:29 +01:00 · 2024-01-14 19:28:45 +01:00 · 2024-01-14 19:28:00 +01:00
5936 changed files with 63319 additions and 73757 deletions
@@ -1,7 +0,0 @@
-# Configuration for the `b4` tool
-# See https://b4.docs.kernel.org/en/latest/config.html
-[b4]
-    send-series-to = buildroot@buildroot.org
-    send-auto-cc-cmd = "./utils/get-developers -e -"
-
-# vim: set filetype=gitconfig:
@@ -29,9 +29,6 @@ indent_size = tab
 indent_style = tab
 indent_size = tab

-[*.patch]
-trim_trailing_whitespace = false
-
 [S{0..9}{0..9}*]
 indent_style = tab
 indent_size = tab
@@ -1,6 +0,0 @@
-Please do not submit a Pull Request via GitHub. Buildroot makes use of a
-[mailing list](http://lists.buildroot.org/mailman/listinfo/buildroot) for patch submission and review.
-See [submitting your own patches](http://buildroot.org/manual.html#submitting-patches) for more info.
-
-Thanks for your help!
-
@@ -1,25 +0,0 @@
-name: 'Repo Lockdown'
-
-on:
-  pull_request_target:
-    types: opened
-
-permissions:
-  pull-requests: write
-
-jobs:
-  action:
-    if: github.repository == 'buildroot/buildroot'
-    runs-on: ubuntu-latest
-    steps:
-      - uses: dessant/repo-lockdown@v4
-        with:
-          pr-comment: |
-            Please do not submit a Pull Request via GitHub. Buildroot makes use of a
-            [mailing list](http://lists.buildroot.org/mailman/listinfo/buildroot) for patch submission and review.
-            See [submitting your own patches](http://buildroot.org/manual.html#submitting-patches) for more info.
-
-            Thanks for your help!
-          lock-pr: true
-          close-pr: true
-
@@ -1,4 +1,4 @@
-/output*
+/output
 /dl
 /.auto.deps
 /.config.cmd
@@ -1,60 +0,0 @@
-Thank you for opening a new issue. To help solve it faster and more easily,
-please review this check-list, and fill in the sections below. Adapt as
-needed.
-
-Do not open an issue to request a new feature; instead, post a message to
-[the mailing list](https://lists.buildroot.org/mailman/listinfo/buildroot).
-
-_Note: issues missing any information may get closed without further ado._
-
---
-### Check-list
-
- [ ] I did not find the issue in the existing issues
- [ ] I can reproduce the issue with unmodified Buildroot from [this
-      repository](https://gitlab.com/buildroot.org/buildroot), not from a
-      fork somewhere else
- [ ] I can reproduce the issue on the latest commit of the branch I'm using:
-    - [ ] master
-    - [ ] stable (i.e. 20NN.MM.x - please specify)
-    - [ ] LTS (i.e. 20NN.02.x - please specify)
- [ ] I can reproduce the issue after running `make clean; make`
- [ ] I attached the full build log file (e.g. `make 2>&1 |tee build.log`)
- [ ] I attached a **minimal** defconfig file that can reproduce the
-      issue (`make BR2_DEFCONFIG=$(pwd)/issue_defconfig savedefconfig`)
- [ ] I also attached the configuration for kconfig-based packages that
-      are enabled (and necessary to reproduce the issue), most notably:
-    - [ ] busybox
-    - [ ] linux
-    - [ ] uclibc
-    - [ ] uboot
-    - [ ] …
-
---
-### What I did
-
- **Buildroot commit sha1**: _get this with `git describe HEAD`_
- **Distribution of the build machine**: _get this with `NAME` and `VERSION` from `/etc/os-release`_
-
-_Here, describe what you did:_
- _any special environment variables: CC, CXX, TARGET, CROSS_COMPILE, etc…_
- _the commands you ran:_
-    ```sh
-    $ make [...]
-    ```
- _anything else that you might think is important…_
-
---
-### What happens
-
-_Here, describe what happens that you believe was incorrect._
-
---
-### What was expected
-
-_Here, describe the behaviour you expected._
-
---
-### Extra information
-
-_Here, you may write additional information that does not fit above_
@@ -1,837 +1,3 @@
-2024.11-rc2, released November 23rd, 2024
-
-	Fixes all over the tree.
-
-	Updated/fixed packages: bmap-tools, go, intel-microcode,
-	libblockdev, libcurl, libkrb5, libnvme, libpng, php,
-	postgresql, python-sip, skopeo, tiff, util-linux-libs
-
-2024.11-rc1, released November 13th, 2024
-
-	Fixes all over the tree and package updates.
-
-	Toolchain:
-
-	- binutils 2.43 added, binutils 2.42 becomes the default.
-	- glibc updated to 2.40
-	- ARM, Bootlin and Synopsys external toolchains updated
-	- Support added for ARM FDPIC, which allows to use shared
-	  libraries on ARM noMMU targets
-
-	Go support: allow using a pre-built Go compiler, using the new
-	go-bin package.
-
-	New defconfigs: friendlyarm_nanopi_neo, nvidia_bf3,
-	stm32f746_disco_sd, ti_am62px_sk, versal_vek280
-
-	Removed defconfigs: qemu_nios2_10m50
-
-	New packages: andes-spi-burn, bfscripts, cpp-httplib, dlib,
-	dpdk, evilwm, go-bin, iana-assignments, iotools, lua-uuid,
-	oath-toolkit, perl-mime-base32, python-aiohappyeyeballs,
-	python-aiomqtt, python-argcomplete, python-dotenv,
-	python-dunamai, python-immutabledict, python-iterable-io,
-	python-path, python-poetry-dynamic-versioning,
-	python-propcache, python-proto-plus, python-psygnal,
-	python-pyaml, python-pydantic-settings, python-pyqt5-sip,
-	python-pysnmpcrypto, python-rgbmatrix, python-sdbus,
-	python-sdbus-networkmanager, python-simple-websocket,
-	python-tinyhtml5, python-zipstream-ng, qt6charts, qt6scxml,
-	superiotool, tailscale, tinyinit, uefisettings
-
-	Removed packages: bsdiff, popperjs
-
-	Added tests: erofs filesystem, audit, dosfstools, dtc,
-	exfatprogs, go-bin, iputils, oath-toolkit, parted, pppd, pv,
-	pyqt5, python-sdbus, python-sdbus-networkmanager, rrdtool,
-	unbound, which
-
-	Issues resolved:
-	- host rpath fixups misses needed directory
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/39
-	- procps-ng: build failure when linking to systemd
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/28
-	- ripgrep leaves /usr/crates2.json / .crates.toml files
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/17
-
-2024.08.2, released November 14th, 2024
-
-	Important / security related fixes.
-
-	Updated/fixed packages: apache, asterisk, bind, cmake, criu,
-	file, fluidsynth, ghostscript, heimdal, intel-microcode,
-	iproute2, jailhouse, jsoncpp, libarchive, libcurl, libldns,
-	libgit2, liblinear, libmdbx, libopenh264, libpng,
-	libtraceevent, libxml2, ltrace, nethogs, nghttp2, ntp,
-	openjdk, php, postgresql,procps-ng, python-pyqt5, python3,
-	qemu, ruby, sqlite, sysvinit, tor, trace-cmd, wpebackend-fdo
-
-	New packages: python-pyqt5-sip
-
-2024.08.1, released October 20th, 2024
-
-	Important / security related fixes.
-
-	Per-package-directories fixes for the .gdbinit file and RPATH
-	fixups for SDK.
-
-	Legal-info: Ensure host-tar and redist directory exists when
-	using override-srcdir, as otherwise the tarball generation
-	(silently) fails.
-
-	utils/check-package: Also check for correct indentation of
-	help lines.
-
-	A large number of typo fixes.
-
-	Defconfigs: imx6slevk: Bump Linux kernel to 6.6.51 to fix
-	build issue with GCC 13
-
-	Updated/fixed packages: asterisk, aubio, bind, busybox, cairo,
-	cryptsetup, cups, expat, ffmpeg, genpart, glibc, gnutls, go,
-	grub2, libarchive, libcurl, libilbc, libpcap, lighttpd, linux,
-	linux-pam, mosquitto, mtd, nginx, php, procps-ng, pure-ftpd,
-	python-django, python3, qt6core5compat, qt6svg, qt6tools,
-	rp-pppoe, samba4, sysklogd, wireplumber, wpewebkit, xenomai
-
-	Issues resolved:
-	- procps-ng: build failure when linking to systemd
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/28
-	- orange pi 2w does not boot
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/36
-	- glibc configure fails on aarch64 with mathvec SVE ACLE error
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/40
-	- Kernel Build from Custom Git Repo fails with hash-error
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/46
-	- package/linux-pam: Remove unneeded flex dependency
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/47
-
-2024.08, released September 6th, 2024
-
-	Various fixes.
-
-        Fixed defconfigs: imx8mqevk: Bump TF-A, U-Boot and Linux to
-        fix build with gcc 13.x
-
-	Removed defconfigs: pandaboard
-
-	Updated/fixed packages: aer-inject, arm-trusted-firmware,
-	armadillo, babeld, cache-calibrator, clamav, fbdump, gerbera,
-	libgtk4, libopenssl, mender, p910nd, tllist, wpa_supplicant
-
-        Removed packages: midori
-
-2024.08-rc3, released September 1st, 2024
-
-	Fixes all over the tree.
-
-	Removed defconfigs: mx25pdk
-
-	Updated/fixed packages: chicken, comix-cursors, dovecot,
-	dovecot-pigeonhole, elf2flt, enscript, fbset, freeipmi, gcc,
-	grub2, libcuefile, libcurl, libglob, libuecc, norm, php,
-	postgresql, proftpd, python-sqlparse, python3, sofia-sip,
-	szip, unbound, x264, xserver_xorg-server, zabbix
-
-	Removed packages: frotz
-
-2024.08-rc2, released August 22nd, 2024
-
-	Fixes all over the tree.
-
-	Infrastructure: use "-ztext" rather than "-z text" in LDFLAGS
-	to work around buggy build systems
-
-	Defconfigs: Beaglev fire / Microchip mpfs icicle: Correct
-	Linux/U-Boot tarballs, Raspberryi 5: Correct CPU setting,
-	Zynqmp zcu106: use v1.0 DDR config, Zynqmp zcu10* / kria*:
-	Correct U-Boot dependency
-
-	Updated/fixed packages: aer-inject, asterisk, atop, aumix,
-	avahi, botan, chicken, dc3dd, ffmpeg, flashrom, gnuradio,
-	gnu-efi, gnutls, hiawatha, iperf3, iproute2, ledmon, libffi,
-	libgpg-error, libkcapi, libpcap, mariadb, mdadm, ncurses,
-	nginx, ntpsec, python-huepy, python-tpm2-pytss,
-	python-unittest-xml-reporting, qt6base, qt6tools, skopeo,
-	strongswan, systemd, uboot, uclibc, unbound, vboot-utils,
-	wpa_supplicant, wpebackend-fdo
-
-	Removed packages: fan-ctrl
-
-2024.08-rc1, released August 8th, 2024
-
-	Fixes all over the tree (especially related to GCC 14.x
-	compatibility) and package updates.
-
-	Toolchains:
-	- uClibc updated to 1.0.49
-	- GDB 15.x added, GDB 14.x now the default
-	- GCC 14.x updated to GCC 14.2.0
-	- Support for Linux 6.9/6.10 headers added
-
-	Infrastructure:
-	- Patches on packages are now applied with -F0, which means no
-	  fuzz is accepted anymore.
-	- Improvements to the canonical example of SysV init script
-
-	New defconfigs: arm_fvp_ebbr, beagleplay, beaglev_fire,
-	cubieboard1, imx6ulz_bsh_smm_m2_defconfig, raspberrypi5,
-	spike_riscv32. ti_am62ax_sk, versal_vpk180
-
-	Removed defconfigs: beagleboardx15, beaglev, imx8mpico
-
-	New packages: blake3, chicken, cloudfared, docker-cli-buildx,
-	espflash, fd, freescale-imx/firmware-upower, fwupd, fwupd-efi,
-	gtkiostream, graphene, kmon, libavif, libdex, libgtk4,
-	libjcat, libopenmpt, libtpms, mxt-app, nethogs, openconnect,
-	parsec-tool, pico-sdk, picotool, python-aerich,
-	python-autocommand, python-betterproto, python-configobj,
-	python-grpclib, python-inflect, python-jaraco-collections,
-	python-jaraco-context, python-jaraco-text, python-pyasynchat,
-	python-pyasyncore, python-dictdiffer, python-pkgconfig,
-	python-pypika-tortoise, python-ruamel-yaml-clib,
-	python-tomlkit, python-tomli-w, python-tpm2-pytss,
-	python-tortoise-orm, python-uswid, qt6declarative,
-	qt6languageserver, qt6mqtt, qt6opcua, qt6shadertools,
-	qt6tools, qt6virtualkeyboard, qt6wayland, qt6websockets,
-	skopeo, sqlitecpp, swipl, swtpm, tig, tipidee, tpm2-openssl,
-	xilinx-prebuilt, zoxide
-
-	Removed packages: beaglev-ddrinit, beaglev-secondboot,
-	beecrypt, cgic, dvb-apps, gamin
-
-	New runtime tests: 4th, attr, atftp, bcc, btrfs, btrfsprogs,
-	dmidecode, go, gpsd, iproute2, kmod, lame, make, mariadb,
-	mawk, mosquitto, nmap, ntp, python-asn1crypto, python-pymupdf,
-	python-ruamel-yaml, rt-tests, swipl, vorbis-tools, xfsprogs
-
-	Issues resolved:
-	- Are there plans to add raspberrypizero2w_64_defconfig config?
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/1
-	- Some folders can't visit and some file is missing while running
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/2
-	- wpewebkit build fails on ARM Neon
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/3
-	- TAR-1.35 will not build for target (host-variant will build)
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/4
-	- package/xz without shared libraries breaks Python build
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/5
-	- unable to build - 404 at sources.buildroot.net
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/10
-	- OpenSSH 9.8 broken
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/11
-	- Update Openssh to Version 9.8p1 (CVE-2024-6387) in Long Term
-	  Support Release 2024.02.x
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/14
-	- Toolchain (host-gcc-final-14.1.0) build failure with
-	  y2038/BR2_TIME_BITS_64 enabled
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/16
-	- building go/golang gives error
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/18
-	- GCC 13.3 is missing
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/20
-	- package containerd update to avoid hanging docker exec
-	  commands
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/21
-	- "BR2_EXTERNAL broken missing srctree error Config.in"
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/24
-	- Can't subscribe buildroot mailing list
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/25
-
-2024.05.3, released September 9th, 2024
-
-	Important / security related fixes.
-
-        A large number of GCC 14.x compilation fixes and additional
-        runtime tests.
-
-        Infrastructure:
-        - Be more robust against text files (for package hashes and
-          users) incorrectly missing a terminating newline.
-
-        - Fix various issues with the pkg-kconfig infrastructure and
-          per-package-directories builds
-          (BR2_PER_PACKAGE_DIRECTORIES).
-
-	Updated/fixed packages: aer-inject, am335x-pru-package,
-	apache, apr, apr-util, attr, augeas, autossh, bandwidthd,
-	bcusdk, boost, brcm-patchram-plus, btrfs-progs, busybox,
-	can-utils, coreutils, cpuload, cryptsetup, cwiid, dhrystone,
-	dvb-apps, elfutils, faifa, fetchmail, ffmpeg, fluent-bit,
-	fluidsynth, freerdp, gcc, gcc-bare-metal, gdb, gnutls, gpsd,
-	hiawatha, hostapd, htop, ibm-sw-tpm2, intel-microcode, iperf3,
-	iproute2, ksmbd-tools, libcli, libcoap, libcurl, libest,
-	libfreefare, libgtk3, libngs, libpwquality, libressl, libupnp,
-	libxml2, libxslt, lrzsz, mdio-tools, micropython,
-	mjpg-streamer, mokutil, mpir, ncftp, nginx, nodejs, odb,
-	open-iscsi, openldap, openswan, openvpn, pistache, procps-ng,
-	python-django, quotatool, rtty, ruby, sconeserver, speex,
-	swaybg, tar, tftpd, tinyssh, uclibc, uclibc-ng-test, unbound,
-	uuu, vorbus-tools, wpewebkit, zfs, zsh
-
-        Issues resolved:
-	- TAR-1.35 will not build for target (host-variant will build)
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/4
-	- Toolchain (host-gcc-final-14.1.0) build failure with
-	  y2038/BR2_TIME_BITS_64 enabled
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/16
-
-2024.05.2, released August 14th, 2024
-
-	Important / security related fixes.
-
-	Various minor improvements to utils/check-package
-
-	Defconfigs: Add download hashes for chromebook-elm,
-	chromebook-snow and stm32mp157a_dk1
-
-	Updated/fixed packages: android-tools, bcc, bitcoin, boost,
-	btrfs-progs, c-ares, cdrkit, check, containerd, directfb,
-	dump1090, ed, exim, fail2ban, frotz, fwts, gcc, gdb, go, gpm,
-	kexec, libarchive, libgeos, libressl, llvm, mupdf, ncftp,
-	nodejs, ntpsec, octave, openssh, pppd, python-mupdf,
-	python-ruamel-yaml, qt5webkit, rawk-hawkbit-updater,
-	rtl8188eu, snappy, squid, sunxi-tools, syslinux, systemd,
-	tcf-agent, tftpd, ubus, util-linux, uvw, webkitgtk, wolfssl,
-	wpewebkit, x265, xlib_libxshmfence, xvisor
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#15231: gcc --help -v doesn't work correctly with gcc>=10 and..
-
-2024.05.1, released July 13th, 2024
-
-	Important / security related fixes.
-
-	Infrastructure: Ensure support/scripts/apply-patches can be
-	used outside Buildroot (regression in 2024.05).
-
-	Defconfig: Pine64 rockpro64: Build ethernet driver in kernel
-	rather than as module. QEMU sh4: Change to initramfs to
-	workaround regression in QEMU. Visionfive2: Correct kernel
-	headers version
-
-	Updated/fixed packages: apache, avro-c, daq, dav1d,
-	fluent-bit, ghostscript, glibc, libmad, libopenssl,
-	linux-firmware, mesa3d, network-manager, ntp, nut, octave,
-	openssh, openvpn, php, raspberrypi-usbboot, redis, sentry-cli,
-	tor, uuu, vlc, xmrig, znc
-
-2024.05, released June 12th, 2024
-
-	Various fixes.
-
-	Infrastructure: Ensure a custom tar program specified with
-	make TAR=/path/to/custom/tar is used everwhere.
-
-	Defconfigs: Fix build issues and runtime warnings for
-	Beaglebone qt5, Qemu ppc64/le pseries, TI am62x/am64x.
-
-	Add hashes for Beaglebone qt5, imx8mn bsh sm s2 / pro,
-	stm32f429 disco XIP, stm32f769 disco sd.
-
-	Updated/fixed packages: bc, collectd, composer, cvs,
-	docker-compose, flutter-engine, git, liblockfile, libzenoh-c,
-	lightning, nginx, p11-kit, python-lxml, python3, qt6base,
-	rrdtool, sofia-sip, syslog-ng, systemd, uclibc, unixodbc
-
-2024.05-rc2, released June 4th, 2024
-
-	Fixes all over the tree.
-
-	Download:
-	- Dropped the (noop) --passive-ftp option from default wget
-	  options for compatibility with wget2
-
-	- Fixed an issue with the generated archives (for
-	  git/svn/cargo/go) when multiple packages share an archive
-	  (E.G. linux vs linux-headers).
-
-	Defconfigs: Fix build issue with binutils 2.41+ for
-	Acmesystems Aria / Arietta, add download hashes for a number
-	of defconfigs. Fix FIT external position for i.MX8 boards
-
-	Updated/fixed packages: dnsmasq, docker-compose, doom-wad,
-	ebtables, esp-hosted, file, freeradius-client,
-	freeradius-server, go, kmod, libmnl, libnetfilter_acct,
-	libnetfilter_log, linux, luarocks, lynx, makedumpfile,
-	micropython, mtd, ncftp, newlib-bare-metal, nfacct, ntp,
-	octave, proftpd, qt5base, systemd, tpm2-tss, uboot-tools,
-	ulogd, vala, zip
-
-	Removed packages: at91bootstrap, at91dataflashboot,
-	on2-8170-libs, on2-8170-modules
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#15973: imx8m bootloader image generation broken since update..
-	#16093: kmod and gcc-14 build error
-
-2024.05-rc1, released May 30th, 2024
-
-	Fixes all over the tree and new features.
-
-        Toolchains:
-        - Binutils 2.24 added, 2.39 dropped, 2.41 is now default
-        - GCC 14.x added, 11.x dropped, 13.x is now default
-        - uClibc-ng bumped to 1.0.48
-        - Musl bumped to 1.2.5, adds riscv32 support
-        - Glibc bumped to 2.39, libcrypt no longer available (see
-          libxcrypt package)
-        - External glibc based toolchains no longer install libcrypt
-          files (except for libcrypt.so.1) to not conflict with the
-          libxcrypt package
-        - Bootlin external toolchains updated to 2024.02
-        - Support for external toolchains using GCC version 14
-        - Old external Codesourcery ARM/AARCH64 toolchains removed
-        - Old external Codesourcery niosII toolchain removed
-        - Old external Codescape mips toolchains removed
-        - Support for Linux 6.7 / 6.8 kernel headers added
-
-	Architecture:
-        - Support for riscv32 noMMU added
-        - Internal toolchains for SPARC (re-)added
-        - Support for the Motorola m68k specific shared library
-	  support for the FLAT binary format dropped, as support has
-	  been removed from the Linux kernel as of v5.19.
-
-        Download (notice, Buildroot generated tarballs have changed):
-        - Tar 1.35 is now required (will be automatically built if not
-          available on the host). Notice that tar 1.35 changes the way
-          devmajor/minor is stored, so tarballs created with 1.35 are
-          not binary identical to <1.35
-        - The tarball creation logic has now been extended to
-          correctly handle when ACLs are set on the download
-          directory.
-        - An issue with conflicting git tags between (different
-          versions of) a package has been fixes
-        - Git attributes are now handled correctly
-
-        Security:
-        - The /dev/shm entry in the default /etc/fstab used for
-          busybox and sysv init systems was missing the sticky bit,
-          allowing users to delete and replace other users files.
-
-        Infrastructure:
-        - kconfig/menuconfig can now be built with GCC 14.x
-        - Git is now used to to fetch CVE data from the FKIE
-	  repository to work around an issue with missing meta files
-	  in the releases.
-        - utils/check-package now also checks if defconfigs use
-          BR2_DOWNLOAD_FORCE_CHECK_HASHES to ensure custom
-          bootloader/kernels are correctly downloaded.
-
-        New defconfigs: Beagleboneai64, Orangepi Zero2w, Pine64 star64
-
-	New packages: basu, bats-assert, bats-file, bats-support, bcc,
-	bpftrace, export-subst, flutter-adaptive-scaffold-example,
-	flutter-animations-example, flutter-dynamic-layouts-example,
-	flutter-go-router-example, flutter-image-example,
-	flutter-markdown-example, flutter-packages,
-	flutter-rfw-local-example, go-bootstrap-stage3, igt-gpu-tools,
-	libgpiod2, libxmlb, libzenoh-c, lmdb, lua-lightningmdb,
-	lua-lsdbus, mokutil, python-email-validator,
-	python-expandvars, python-fastui, python-hid, python-jc,
-	python-mpmath, python-poetry-core, python-sympy,
-	python-yamllint, qbee-agent, starfive-spltool, ustreamer
-
-	Removed packages: flutter-gallery, omxplayer, ti-k3-image-gen
-
-	Issues resolved (http://bugs.uclibc.org):
-
-        #14416: Mesa3D missing DRI3 support for various Gallium drivers
-        #15766: BR2_PACKAGE_WESTON_XWAYLAND -- 12.0.1 -- fails to build..
-        #15997: Build Squid with GCC12.3 in Buildroot 2024.02 will fail
-        #16009: 'select' does not work with 'choice'
-        #16036: android-tools version is too old
-        #16075: Cannot use linux kernel extensions from external tree..
-
-2024.02.8, released November 14th, 2024
-
-	Important / security related fixes.
-
-	Updated/fixed packages: apache, asterisk, bind, bootgen, criu,
-	file, fluidsynth, ghostscript, heimdal, intel-microcode,
-	jailhouse, jsoncpp, libarchive, libcurl, libldns, liblinear,
-	libmdbx, libopenh264, ltrace, lightning, nghttp2, ntp, php,
-	postgresql, procps-ng, python-pyqt5, ruby, sysvinit, tor,
-	wpebackend-fdo
-
-	New packages: python-pyqt5-sip
-
-2024.02.7, released October 21th, 2024
-
-	Important / security related fixes.
-
-	Per-package-directories fixes for the .gdbinit file and RPATH
-	fixups for SDK.
-
-	utils/check-package: Also check for correct indentation of
-	help lines.
-
-	A large number of typo fixes.
-
-	Updated/fixed packages: aer-inject, armadillo, asterisk,
-	aumix, babeld, bind, botan, cache-calibrator, clamav,
-	comix-cursors, cryptsetup, cups, dovecot, dovecot-pigeonhole,
-	expat, fbset, genpart, glibc, gnu-efi, gnutls, go, grub2,
-	libarchive, libcuefile, libcurl, libglob, libgpg-error,
-	libilbc, libkcapi, libopenssl, libpcap, libuecc, linux-pam,
-	mosquitto, nginx, ntpsec, p910nd, php, postgresql, procps-ng,
-	proftpd, pure-ftpd, python-django, python-huepy,
-	python-sqlparse, python-unittest-xml-reporting, python3,
-	qt6base, qt6svg, rp-pppoe, sofia-sip, strongswan, szip,
-	tllist, unbound, wpebackend-fdo, wpewebkit, x264, xenomai,
-	xserver_xorg-server, zabbix
-
-	New packages: go-bootstrap-stage3
-
-	Issues resolved:
-	- procps-ng: build failure when linking to systemd
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/28
-	- orange pi 2w does not boot
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/36
-	- glibc configure fails on aarch64 with mathvec SVE ACLE error
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/40
-	- Kernel Build from Custom Git Repo fails with hash-error
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/46
-	- package/linux-pam: Remove unneeded flex dependency
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/47
-
-2024.02.6, released September 9th, 2024
-
-	Important / security related fixes.
-
-        Added a large number of additional runtime tests.
-
-        Infrastructure:
-        - Be more robust against text files (for package hashes and
-          users) incorrectly missing a terminating newline.
-
-        - Fix various issues with the pkg-kconfig infrastructure and
-          per-package-directories builds
-          (BR2_PER_PACKAGE_DIRECTORIES).
-
-	Updated/fixed packages: aer-inject, am335x-pru-package,
-	apache, apr, apr-util, attr, boost, btrfs-progs, busybox,
-	cryptsetup, dropbear, elfutils, fetchmail, ffmpeg, fluidsynth,
-	freerdp, gcc, gdb, gnutls, gpsd, hiawatha, hostapd, htop,
-	intel-microcode, iperf3, ksmbd-tools, libcoap, libcurl,
-	libest, libgtk3, libpwquality, libressl, libupnp, libxml2,
-	libxslt, lrzsz, mdio-tools, micropython, mjpg-streamer, mpir,
-	ncftp, nginx, nodejs, open-iscsi, openldap, openvpn, pistache,
-	procps-ng, python-django, ruby, speex, swaybg, tinyssh,
-	uclibc, uclibc-ng-test, unbound, uuu, wpewebkit, zfs
-
-        Issues resolved:
-	- Toolchain (host-gcc-final-14.1.0) build failure with
-	  y2038/BR2_TIME_BITS_64 enabled
-	  https://gitlab.com/buildroot.org/buildroot/-/issues/16
-
-2024.02.5, released August 14th, 2024
-
-	Important / security related fixes.
-
-	Various minor improvements to utils/check-package
-
-	Defconfigs: Add download hashes for chromebook-elm,
-	chromebook-snow and stm32mp157a_dk1
-
-	Updated/fixed packages: bitcoin, boost, btrfs-progs, c-ares,
-	cdrkit, check, containerd, directfb, ed, exim, fwts, gcc, gdb,
-	go, kexec, libarchive, libgeos, libressl, mupdf, nodejs,
-	ntpsec, octave, openssh, pppd, python-mupdf,
-	python-ruamel-yaml, qt5webkit, rauc-hawkbit-updater, snappy,
-	squid, sunxi-tools, syslinux, systemd, tcf-agent, ubus,
-	util-linux, uvw, webkitgtk, wolfssl, wpewebkit, x265,
-	xlib_libxshmfence, xvisor
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#15231: gcc --help -v doesn't work correctly with gcc>=10 and..
-
-2024.02.4, released July 13th, 2024
-
-	Important / security related fixes.
-
-	Infrastructure: Ensure a custom tar program specified with
-	make TAR=/path/to/custom/tar is used everwhere.
-
-	Defconfig: Pine64 rockpro64: Build ethernet driver in kernel
-	rather than as module.
-
-	Updated/fixed packages: apache, composer, daq, fluent-bit,
-	ghostscript, glibc, liblockfile, libmad, libopenssl, mesa3d,
-	network-manager, ntp, octave, openssh, openvpn, php, python3,
-	qt6base, raspberrypi-usbboot, redis, sentry-cli, systemd, tor,
-	vlc, xmrig, znc
-
-2024.02.3, released June 10th, 2024
-
-	Important / security related fixes.
-
-	Misc:
-	- Fixed a number of compilation issues for hosts using GCC
-          14.x, including for kconfig.
-
-	Download:
-	- Drop redundant --passive-ftp from default wget options and
-	  migrate a number of packages using FTP upstreams to HTTP(S)
-	  for compatibility with wget2 which does not have FTP support
-
-	- Ensure downloads are correctly shared for host packages that
-	  try to do so using <pkg>_DL_SUBDIR and ensure the correct
-	  toplevel directory name is used in generated tarballs when
-	  downloads are shared.
-
-	Arch: Enable SSE2 support for x86 Pentium M variant.
-
-	Defconfigs: Orangepi PC/R1, Raspberrypi zero2w, Sipeed
-	licheepi nano, Wandboard: Fix compilation issues. PC x86-64
-	bios/efi: add wireless regdb to fix kernel warning during
-	boot, iMX.8 boards: Adjust FIT external data position to match
-	imx-mkimage changes, fixing boot issues.
-
-	Updated/fixed packages: am33x-cm, apcupsd,
-	arm-trusted-firmware, binutils-bare-metal, bpftool, catch2,
-	ccache, cjson, clamav, cog, coreutils, cryptodev-linux,
-	dhcpcd, dmraid, dnsmasq, docker-cli, docker-compose,
-	docker-engine, doom-wad, duma, elf2flt, ebtables, elfutils,
-	evemu, file, fluidsynth, freeradius-client, freeradius-server,
-	freerdp, fwts, gcc, gcc-bare-metal, git, gnuplot, go,
-	gr-osmosdr, gst1-plugins-good, hidapi, imagemagick,
-	intel-gmmlib, ivi-homescreen, janus-gateway, kexec, kmod,
-	kodi, libarchive, libdrm, libedit, libffi, libglib2, libhtp,
-	libjwt, libkrb5, libmanette, libmdbx, libmnl,
-	libnetfilter_acct, libnetfilter_log, libnpth, libopenssl,
-	libpng, libuhttpd, liburiparser, libutempter, libvncserver,
-	libwpe, lightning, linux-firmware, linux-pam, lua-cffi,
-	luajit, lvm2, lynx, mariadb, mesa3d, micropython, minisign,
-	musl, mutt, ncftp, network-manager, newlib-bare-metal, nfacct,
-	nfs-utils, octave, openjpeg, openocd, oprofile,
-	perl-dbd-mysql, php, postgresql, pppd, privoxy, procps-ng,
-	proftpd, proj, putty, python-ml-dtypes, python-pillow,
-	python-rds-py, qemu, qt5base, redis-plus-plus, rtl8189fs,
-	ruby, samba4, shadow, smcroute, speech, squid, sscep,
-	suricata, swupdate, systemd, ti-sgx-km, tinycbor, tinyproxy,
-	tor, tpm2-tss, ttyd, uboot-tools, ulogd, vala, weston,
-	wpewebkit, x11vnc, zbar, zeromq, zfs, zip, zxing-cpp
-
-	Issues resolved (http://bugs.uclibc.org):
-
-        #15766: BR2_PACKAGE_WESTON_XWAYLAND -- 12.0.1 -- fails to build..
-	#15973: imx8m bootloader image generation broken since update..
-        #16075: Cannot use linux kernel extensions from external tree..
-	#16093: kmod and gcc-14 build error
-
-2024.02.2, released May 7th, 2024
-
-	Important / security related fixes.
-
-        Security: The /dev/shm entry in the default /etc/fstab used
-        for busybox and sysv init systems was missing the sticky bit,
-        allowing users to delete and replace other users files.
-
-        Defconfigs: Mangopi mq1rdw1: Lock kernel headers to 6.6.x.
-
-	Updated/fixed packages: apache, botan,
-	brcmfmac_sdio-firmware-rpi, clamav, cmake, containerd,
-	crucible, dmenu-wayland, dmraid, docker-cli, docker-engine,
-	domoticz, fmc, freeipmi, gdal, gdb, giflib, gnupg2, go,
-	google-breakpad, googlefontdirectory, imx-gpu-viv, inih,
-	libassuan, libblockdev, libcurl, libdrm, libgpg-error,
-	libksba, libnpth, libressl, libtracefs, lxc, mbedtls, mesa3d,
-	oatpp, opensc, oprofile, perl-net-ssleay, petitboot,
-	php-xdebug, psplash, python-pypng, python-segno,
-	python-service-identity, python3, skeleton-init-sysv, systemd,
-	tcf-agent, tiff, uuu, wolfssl, xmrig, zic
-
-	Issues resolved (http://bugs.uclibc.org):
-
-        #14416: Mesa3D missing DRI3 support for various Gallium drivers
-        #16009: 'select' does not work with 'choice'
-        #16036: android-tools version is too old
-
-2024.02.1, released March 26th, 2024
-
-	Important / security related fixes.
-
-	Toolchain: Dropped old Codesourcery ARM / AARCH64 and
-	Codescape MIPS external toolchains as they use old Glibc
-	versions not compatible with 64-bit time_t
-
-	Defconfigs: Starfive visionfive2: Use correct genimage
-	configuration. TI am62x_sk / am64_sk: Use correct optee-os
-	platform setting and use a fixed ti-k3-r5-loader version.
-
-	Infrastructure: Use git to fetch CVE data from the FKIE
-	repository to work around an issue with missing meta files in
-	the releases.
-
-	Updated/fixed packages: axel, bash, bitcoin, botan, busybox,
-	containerd, cryptsetup, cvs, docker-compose, docker-engine,
-	ell, expat, giflib, gmp, go, harfbuzz, intel-gmmlib,
-	intel-mediadriver, iwd, kodi, kodi-pvr-hts, libcgroup, libdrm,
-	libgit2, libkrb5, libnfs, libunwind, libvpl,
-	libtorrent-rasterbar, libxml2, linux, mariadb, mesa3d,
-	mmc-utils, msmtp, multipath-tools, neon, onevpl-intel-gpu,
-	openssh, openvpn, osm2pgsql, owfs, php, poco, policycoreutils,
-	postgis, privoxy, pulseaudio, pure-ftpd, putty,
-	python-configshell-fb, python-rtslib-fb, rauc, restorecond,
-	spice, squid, targetcli-fb, tzdata, util-linux, vdr, xmrig,
-	xvisor, zic
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#15997: Build Squid with GCC12.3 in Buildroot 2024.02 will fail
-
-2024.02, released March 5th, 2024
-
-	Various fixes.
-
-	Updated/fixed packages: botan, conmon, dash, efivar, expat,
-	fluent-bit, gcc, gst1-vaapi, libcoap, libselinux, liburing,
-	libva, libxml2, ltp-testsuite, luvi, newlib-bare-metal,
-	nginx-naxsi, octave, openblas, openvmtools, parted, poco,
-	powertop, python-aiohttp, python-cheroot, python-django,
-	python-grpcio, rauc, rauc-hawkbit-updater, rtl8822cs, rust,
-	sdl2, shadow, spirv-tools, strace, strongswan, tar, tllist,
-	vim
-
-	Removed packages: mysql (virtual), oracle-mysql,
-	python-setuptools-scm-git-archive
-
-2024.02-rc2, released March 1st, 2024
-
-	Fixes all over the tree.
-
-	Infrastructure: Various fixes for pkg-stats after moving to
-	the FKIE CVE feed and support for older python/ijson versions.
-
-	Updated/fixed packages: ccache, dracut, erlang, freetype,
-	libheif, libpthsem, micropython, newlib-bare-metal, openssh,
-	poco, python3, redis, rhash, shim, squid, syslinux
-
-2024.02-rc1, released February 25th, 2024
-
-	Fixes all over the tree and new features.
-
-	Toolchain:
-
-	- GDB: Add version 14.1, default to 13.2.
-
-	- uClibc-ng updated to 1.0.45
-
-	- Bootlin external toolchains updated to 2023.11-1, moving the
-          stable toolchains to GCC 12.3 / binutils 2.40 / GDB 13.2 /
-          glibc 2.38 / musl 1.2.4 / uClibc-ng 1.0.45
-
-	- Add support for building a bare metal toolchain suitable for
-	  building firmware for certain (co-)processors, possibly
-	  using a different CPU architecture than the main Buildroot
-	  configuration.
-
-	Default optimization level changed from optimize for size
-        (-Os) to optimize for speed (-O2).
-
-	Support: Use the Fraunhofer FKIE JSON files for CVE matching
-	now that NVD is about to deprecate its feeds.
-
-	New defconfigs: AMD Zynqmp kria kd240 and kr260, zcu104, Avnet
-	RZBoard V2L, Mangopi MQ1RDW2, NXP i.MX 93 11x11 EVK, QEMU
-	Riscv64 virt-efi, TI AM574x Industrial Development Kit
-
-	Removed defconfigs: Zynq qmtech
-
-	New packages: binutils-bare-metal, dmenu-wayland, fcft, foot,
-	firmware-ele-imx, ivi-homescreen, libjwt, libtraceevent,
-	libtracefs, libutempter, lua-ansicolors, lua-argparse,
-	lua-conciseserialization, lua-ubjson, minisign,
-	newlib-bare-metal, python-aiosqlite, python-annotated-types,
-	python-anyio, python-asyncssh, python-bitarray,
-	python-cachetools, python-contourpy, python-decouple,
-	python-fastapi-sessions, python-fastapi,
-	python-google-api-core, python-google-auth,
-	python-googleapis-common-protos, python-grpc-requests,
-	python-grpcio-reflection, python-grpcio, python-httpcore,
-	python-httpx, python-matplotlib-inline, python-ml-dtypes,
-	python-multipart, python-pydantic-core, python-pypng,
-	python-starlette, python-tcolorpy, python-trafaret,
-	python-urwid-readline, python-uvicorn, rlwrap, tllist
-
-	Removed packages: davinci-bootcount (renamed to
-	uboot-bootcount), flickcurl, gmpc, libmpd, micropython-lib,
-	python-crossbar, python-pygame, tinymembench
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#10096: SH4 toolchain does not build Linux kernel magicpanelr2_..
-	#15889: please update meson
-	#15898: Unable to boot syslinux.efi produced by buildroot (EFI 64-..
-	#15910: USB keyboard is not working by default "raspberrypicm4io_..
-	#15952: Grub fails to load large rootfs files
-
-2023.11.3, released March 26th, 2024
-
-	Important / security related fixes.
-
-	Defconfigs: Starfive visionfive2: Use correct genimage
-	configuration.
-
-	Updated/fixed packages: bind, bitcoin, botan, c-ares, clamav,
-	conmon, containerd, cvs, dash, dnsmasq, docker-engine, dracut,
-	ell, expat, fluent-bit, freetype, gcc, ghostscript, gmp,
-	gnupg2, go, google-breakpad, gst1-python, gst1-vaapi, iwd,
-	libcoap, libcurl, libdnet, libgit2, libheif, libkrb5,
-	libmodsecurity, libnfs, libopenssl, libselinux, libunwind,
-	liburing, libuv, libva, libxml2, ltris, lua-http, luvi,
-	mmc-utils, nginx-naxsi, nodejs, octave, openssh, openvmtools,
-	parted, petitboot, php, poco, postgresql, powertop, privoxy,
-	pure-ftpd, putty, python-cheroot, python-configshell-fb,
-	python-django, python-rtslib-fb, python3,
-	rauc-hawkbit-updater, redis, redis-plus-plus, rsync,
-	s390-tools, sdl2, shim, spice, spirv-tools, squid, strace,
-	strongswan, sudo, systemd, targetcli-fb, uhd, unbound,
-	util-linux, v4l2loopback, vim, webkitgtk, wpewebkit, xvisor,
-	zlib-ng
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#15997: Build Squid with GCC12.3 in Buildroot 2024.02 will fail
-
-2023.11.2, released March 1st, 2024
-
-	Important / security related fixes.
-
-	Added CPE identifiers for a large number of packages.
-
-	Updated/fixed packages: bayer2rgb-neon, brltty, c-ares, cog,
-	containerd, cpio, crda, criu, darkhttpd, davinci-bootcount,
-	dbus, depot-tools, dhcpcd, domoticz, environment-setup, expat,
-	faad2, falcosecurity-libs, flex, flutter-engine,
-	flutter-gallery, flutter-pi, flutter-sdk-bin,
-	freeradius-server, freerdp, frr, gesftpserver, glibc, gnutls,
-	go, gst1-devtools, gst1-libav, gst1-python, gst1-vaapi,
-	gst-omx, gstreamer1, haproxy, hiredis, joe, json-c, leptonica,
-	libcurl, libp11, libuwsc, libvips, libzenoh-pico,
-	linux-firmware, linux-headers, localedef, lua-http, lvm2,
-	lynx, mbedtls, micropython, minizip, mpfr, netatalk, ngrep,
-	onevpl, opencv4, opencv4-contrib, openssh, opus, petitboot,
-	php, python-aiohttp, python-bitarray, python-bitstring,
-	python-esptool, python-gunicorn, python-hpack,
-	python-html5lib, python-lmdb, python-mako, python-numpy,
-	python-oauthlib, python-sqlparse, python-wheel, qt5base,
-	qt6base, redis, runc, sdl2, sqlite, syslog-ng, sysstat,
-	util-linux, vulkan-loader, webkitgtk, weston, wireless-regdb,
-	wlroots, wpewebkit, xlib_libXpm, xterm, xwayland, yasm
-
-	New packages: python-bitarray
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#10096: SH4 toolchain does not build Linux kernel magicpa..
-	#15952: Grub fails to load large rootfs files
-
 2023.11.1, released January 15th, 2024

 	Important / security related fixes.
@@ -991,24 +157,6 @@
 	#15826: nodejs modules with native extensions fail to install
 	#15835: Incompatibility between network-manager and libcurl 8.4

-2023.08.4, released December 4th, 2023
-
-	Important / security related fixes.
-
-	Defconfigs: Raspberrypi: Fix DT overlay for autoproving of
-	bluetooth driver, Toradex apalis i.mx6: Add download hashes
-	for Linux and U-Boot.
-
-	Updated/fixed packages: gcc, erlang, exfatprogs, gsl,
-	imagemagick, intel-microcode, libde265, libmemcached,
-	libpjsip, libxml2, mariadb, memcached, motion, netsnmp, perl,
-	postgresql, putty, rtty, samba4, speechd, squid, vim, vlc,
-	xenomai, xtables-addons, zfs
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#15856: Using BR2_CONFIG= on a different file-system...
-
 2023.08.3, released November 14th, 2023

 	Important / security related fixes.
@@ -1382,105 +530,6 @@
 	#15376: Libiconv config
 	#15461: QtVirtualKeyboard segfaults

-2023.02.11, released March 26th, 2024
-
-	Important / security related fixes.
-
-	Defconfigs: Starfive visionfive2: Use correct genimage
-	configuration.
-
-	Updated/fixed packages: bind, bitcoin, botan, c-ares, clamav,
-	cvs, dash, dnsmasq, ell, exim, expat, freetype, ghostscript,
-	gnupg2, google-breakpad, gst1-python, gst1-vaapi, iwd,
-	libcoap, libcurl, libgit2, libkrb5, libmodsecurity, libunwind,
-	libuv, libxml2, lua-http, luvi, nginx-naxsi, nodejs, openssh,
-	openvmtools, parted, php, poco, postgresql, privoxy,
-	pure-ftpd, putty, python-cheroot, python-configshell-fb,
-	python-django, python-rtslib-fb, python3, rsync, sdl2, shim,
-	spice, squid, strace, strongswan, sudo, systemd, targetcli-fb,
-	unbound, uvw, v4l2loopback, vim, webkitgtk, wpewebkit, xvisor,
-	zlib-ng
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#15997: Build Squid with GCC12.3 in Buildroot 2024.02 will fail
-
-2023.02.10, released March 1st, 2024
-
-	Important / security related fixes.
-
-	Added CPE identifiers for a large number of packages.
-
-	Updated/fixed packages: bayer2rgb-neon, brltty, c-ares,
-	containerd, crda, darkhttpd, davinci-bootcount, dbus,
-	domoticz, environment-setup, expat, faad2, falcosecurity-libs,
-	flex, freeradius-server, freerdp, frr, gesftpserver, glibc,
-	gnutls, go, gst1-devtools, gst1-libav, gst1-python,
-	gst1-vaapi, gst-omx, gstreamer1, haproxy, joe, json-c,
-	leptonica, libcurl, libuwsc, libvips, linux-firmware,
-	linux-headers, localedef, lua-http, lvm2, lynx, mbedtls,
-	micropython, minizip, mpfr, netatalk, ngrep, opencv4,
-	opencv4-contrib, openssh, opus, php, python-aiohttp,
-	python-esptool, python-gunicorn, python-hpack,
-	python-html5lib, python-lmdb, python-mako, python-numpy,
-	python-oauthlib, python-sqlparse, qt5base, qt6base, redis,
-	runc, sdl2, sqlite, sysstat, uuu, webkitgtk, wireless-regdb,
-	wpewebkit, xlib_libXpm, xterm, xwayland, yasm
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#10096: SH4 toolchain does not build Linux kernel magicpa..
-	#15952: Grub fails to load large rootfs files
-
-2023.02.9, released January 15th, 2024
-
-	Important / security related fixes.
-
-	Infrastructure:
-
-	- Download: Revert a permission fixup step in the tarball
-	  creation logic, which lead to a hash mismatch issue in two
-	  cargo-vendored packages, ripgrep and sentry-cli.
-
-	- Build: Pass GIT_DIR=. in the environment (through
-	  HOST_MAKE_ENV/TARGET_MAKE_ENV) to the build steps to
-	  workaround packages trying to detect if they are building in
-	  a git checkout and getting confused when building in a sub
-	  directory of a Buildroot git checkout.
-
-	Updated/fixed packages: apcupsd, arm-trusted-firmware, botan,
-	cjson, cups, dropbear, duktape, edk2, exim, faad2, freeswitch,
-	gcc, gdal, gdb, giflib, glibc, go, google-breakpad, gst-omx,
-	gstd, gst1-devtools, gst1-libav, gst1-plugins-bad,
-	gst1-plugins-base, gst1-plugins-good, gst1-plugins-ugly,
-	gst1-python, gst1-rtsp-server, gst1-vaapi, gstreamer1,
-	gstreamer1-editing-services, ipcalc, jq, json-for-modern-cpp,
-	ksmbd-tools, libaio, libcamera, libcap-ng, libcurl, libebml,
-	libgtk3, libiec61850, libraw, libsigsegv, libssh, libssh2,
-	libuev, libwebsockets, liquid-dsp, lvm2, madplay, mesa3d,
-	micropython, mp4v2, opensc, openssh, orc, php, pipewire,
-	postgis, postgresql, proftpd, putty, python-sip,
-	python-werkzeug, rng-tools, shim, squid, strongswan, sway,
-	tinyssh, tor, tree, uftp, valijson, wireshark, wolfssl,
-	xserver_xorg-server, xwayland
-
-2023.02.8, released December 4th, 2023
-
-	Important / security related fixes.
-
-	Defconfigs: Raspberrypi: Fix DT overlay for autoproving of
-	bluetooth driver, Toradex apalis i.mx6: Add download hashes
-	for Linux and U-Boot.
-
-	Updated/fixed packages: exfatprogs, gcc, imagemagick,
-	intel-microcode, libpjsip, libxml2, mariadb, memcached,
-	motion, netsnmp, perl, postgresql, rtty, samba4, speech,
-	squid, vim, vlc, xenomai, xtables-addons, zfs
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#15856: Using BR2_CONFIG= on a different file-system...
-
 2023.02.7, released November 14th, 2023

 	Important / security related fixes.
@@ -103,13 +103,9 @@ menu "Build options"

 menu "Commands"

-config BR2_CURL
-	string "Curl command"
-	default "curl -q --ftp-pasv --retry 3"
-
 config BR2_WGET
 	string "Wget command"
-	default "wget -nd -t 3"
+	default "wget --passive-ftp -nd -t 3"

 config BR2_SVN
 	string "Subversion (svn) command"
@@ -177,13 +173,6 @@ config BR2_LZCAT
 	  Command to be used to extract a lzip'ed file to stdout.
 	  Default is "lzip -d -c"

-config BR2_ZSTDCAT
-	string "zstdcat command"
-	default "zstdcat"
-	help
-	  Command to be used to extract a zstd'ed file to stdout.
-	  Default is "zstdcat"
-
 config BR2_TAR_OPTIONS
 	string "Tar options"
 	default ""
@@ -329,12 +318,8 @@ config BR2_JLEVEL
 	  Number of jobs to run simultaneously. If 0, determine
 	  automatically according to number of CPUs on the host system.

-comment "ccache needs a host gcc >= 8"
-	depends on !BR2_HOST_GCC_AT_LEAST_8
-
 config BR2_CCACHE
 	bool "Enable compiler cache"
-	depends on BR2_HOST_GCC_AT_LEAST_8
 	help
 	  This option will enable the use of ccache, a compiler cache.
 	  It will cache the result of previous builds to speed up future
@@ -489,7 +474,7 @@ config BR2_STRIP_EXCLUDE_DIRS

 choice
 	prompt "gcc optimization level"
-	default BR2_OPTIMIZE_2
+	default BR2_OPTIMIZE_S
 	help
 	  Set the optimization level for gcc

@@ -535,7 +520,6 @@ config BR2_OPTIMIZE_2
 	  -falign-loops -falign-labels -ftree-vrp -ftree-pre. Please
 	  note the warning under -fgcse about invoking -O2 on programs
 	  that use computed gotos.
-	  This is the default.

 config BR2_OPTIMIZE_3
 	bool "optimization level 3"
@@ -564,6 +548,7 @@ config BR2_OPTIMIZE_S
 	  -falign-loops -falign-labels -freorder-blocks
 	  -freorder-blocks-and-partition -fprefetch-loop-arrays
 	  -ftree-vect-loop-version
+	  This is the default.

 config BR2_OPTIMIZE_FAST
 	bool "optimize for fast (may break packages!)"
@@ -601,7 +586,7 @@ config BR2_ENABLE_LTO
 config BR2_GOOGLE_BREAKPAD_ENABLE
 	bool "Enable google-breakpad support"
 	depends on BR2_INSTALL_LIBSTDCPP
-	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_7 # C++17
+	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 # C++11
 	depends on BR2_USE_WCHAR
 	depends on BR2_TOOLCHAIN_HAS_THREADS
 	depends on BR2_TOOLCHAIN_USES_GLIBC
@@ -144,440 +144,7 @@ endif

 ###############################################################################

-comment "Legacy options removed in 2024.11"
-
-config BR2_PACKAGE_BSDIFF
-	bool "bsdiff has been removed"
-	select BR2_LEGACY
-	help
-	  The bsdiff package was removed as it is not maintained
-	  anymore (no commit since 2014).
-
-config BR2_PACKAGE_PROCPS_NS_ORIGINAL_TOP
-	bool "BR2_PACKAGE_PROCPS_NS_ORIGINAL_TOP has been renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_PROCPS_NG_ORIGINAL_TOP
-	help
-	  The option has been renamed to
-	  BR2_PACKAGE_PROCPS_NG_ORIGINAL_TOP.
-
-config BR2_PACKAGE_QEMU_TARGET_NIOS2
-	bool "qemu nios2 support has been removed"
-	select BR2_LEGACY
-	help
-	  NIOS2 support has been removed since Qemu 9.1.0.
-
-config BR2_PACKAGE_POPPERJS
-	bool "popperjs has been removed"
-	select BR2_LEGACY
-	help
-	  The project has been renamed to floating-ui.
-
-config BR2_KERNEL_HEADERS_6_10
-	bool "kernel headers version 6.10.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 6.10.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_PACKAGE_IPMITOOL_PEN_REG_URI
-	string "IANA PEN registry moved to iana-assignment package"
-	help
-	  Installation of the IANA PEN is now handled by the
-	  iana-assignment package; to install a custom PEN,
-	  use a rootfs-overlay for example.
-
-config BR2_PACKAGE_IPMITOOL_PEN_REG_URI_WRAP
-	bool
-	default y if BR2_PACKAGE_IPMITOOL_PEN_REG_URI != ""
-	select BR2_LEGACY
-
-config BR2_PACKAGE_ERLANG_P1_YAML
-	bool "erlang-p1-yaml has been renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_ERLANG_FAST_YAML
-	help
-	  The erlang-p1-yaml package has been renamed to
-	  erlang-fast-yaml.
-
-config BR2_PACKAGE_ERLANG_P1_XMPP
-	bool "erlang-p1-xmpp has been renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_ERLANG_XMPP
-	help
-	  The erlang-p1-xmpp package has been renamed to erlang-xmpp.
-
-config BR2_PACKAGE_ERLANG_P1_XML
-	bool "erlang-p1-xml has been renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_ERLANG_FAST_XML
-	help
-	  The erlang-p1-xml package has been renamed to erlang-fast-xml.
-
-config BR2_PACKAGE_ERLANG_P1_STUN
-	bool "erlang-p1-stun has been renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_ERLANG_STUN
-	help
-	  The erlang-p1-stun package has been renamed to erlang-stun.
-
-config BR2_PACKAGE_FBV_GIF
-	bool "fbv GIF support has been removed"
-	select BR2_LEGACY
-	help
-	  Fbv GIF support has been removed, use PNG, BMP or JPEG.
-
-config BR2_BINUTILS_VERSION_2_40_X
-	bool "binutils 2.40 has been removed"
-	select BR2_LEGACY
-	help
-	  binutils 2.40 has been removed, use a newer version.
-
-comment "Legacy options removed in 2024.08"
-
-config BR2_PACKAGE_MIDORI
-	bool "midori has been removed"
-	select BR2_LEGACY
-	help
-	  The original WebKitGTK-based Midori is no longer maintained
-	  and doesn't build since WebKitGTK moved to libsoup3 as of
-	  commit 38a098df133aaa2ebf09742054b02db5a44f58e5.
-
-config BR2_PACKAGE_FROTZ
-	bool "frotz has been removed"
-	select BR2_LEGACY
-	help
-	  This package was causing build breakage, and was no longer
-	  maintained in Buildroot.
-
-config BR2_PACKAGE_FAN_CTRL
-	bool "fan-ctrl has been removed"
-	select BR2_LEGACY
-	help
-	  This package was no longer available from SourceForge, the
-	  upstream is completely dead.
-
-config BR2_PACKAGE_FLUTTER_DYNAMIC_LAYOUTS_EXAMPLE
-	bool "flutter-dynamic-layouts-example has been removed"
-	select BR2_LEGACY
-	help
-	  flutter-dynamic-layouts was removed from flutter-packages
-	  as of commit e35f29177495131f0f598fc7ae1ffd74d89edf15.
-
-config BR2_KERNEL_HEADERS_6_9
-	bool "kernel headers version 6.9.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 6.9.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_x86_knightslanding
-	bool "knightslanding x86 architecture support dropped"
-	select BR2_LEGACY
-	help
-	  GCC 14.x has marked this architecture as obsolete, and emits
-	  a warning causing build failures.
-
-config BR2_x86_knightsmill
-	bool "knightsmill x86 architecture support dropped"
-	select BR2_LEGACY
-	help
-	  GCC 14.x has marked this architecture as obsolete, and emits
-	  a warning causing build failures.
-
-config BR2_PACKAGE_DVB_APPS
-	bool "dvb-apps package removed"
-	select BR2_LEGACY
-	help
-	  The dvb-apps package was removed as it is not maintained
-	  anymore (no commit since 2014).
-
-config BR2_PACKAGE_GAMIN
-	bool "gamin package removed"
-	select BR2_LEGACY
-	help
-	  The gamin package was removed as it is not maintained
-	  anymore (no commit since 2016).
-
-config BR2_PACKAGE_CAIRO_SVG
-	bool "cairo svg support"
-	select BR2_LEGACY
-	select BR2_PACKAGE_CAIRO_PNG
-	help
-	  Cairo SVG is compiled together with PNG.
-
-config BR2_PACKAGE_CAIRO_SCRIPT
-	bool "cairo script support"
-	select BR2_LEGACY
-	select BR2_PACKAGE_CAIRO_ZLIB
-	help
-	  Cairo script got merged into cairo zlib.
-
-config BR2_PACKAGE_CAIRO_PS
-	bool "cairo postscript support"
-	select BR2_LEGACY
-	select BR2_PACKAGE_CAIRO_ZLIB
-	help
-	  Cairo PS got merged into cairo zlib.
-
-config BR2_PACKAGE_CAIRO_PDF
-	bool "cairo pdf support"
-	select BR2_LEGACY
-	select BR2_PACKAGE_CAIRO_ZLIB
-	help
-	  Cairo PDF got merged into cairo zlib.
-
-config BR2_PACKAGE_CAIRO_XML
-	bool "cairo xml support"
-	select BR2_LEGACY
-	select BR2_PACKAGE_CAIRO_ZLIB
-	help
-	  Cairo XML got merged into cairo zlib.
-
-config BR2_GDB_VERSION_12
-	bool "gdb 12.x has been removed"
-	select BR2_LEGACY
-	help
-	  GDB 12.x has been removed. The new default version of GDB
-	  14.x has been automatically selected instead.
-
-config BR2_TARGET_BEAGLEV_DDRINIT
-	bool "beaglev-ddrinit has been removed"
-	select BR2_LEGACY
-	help
-	  The beaglev-secondboot package has been removed after
-	  the beaglev_defconfig removal.
-
-config BR2_TARGET_BEAGLEV_SECONDBOOT
-	bool "beaglev-secondboot has been removed"
-	select BR2_LEGACY
-	help
-	  The beaglev-secondboot package has been removed after
-	  the beaglev_defconfig removal.
-
-config BR2_PACKAGE_ONEVPL_INTEL_GPU
-	bool "onevpl-intel-gpu has been renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_INTEL_VPL_GPU_RT
-	help
-	  The onevpl-intel-gpu package has been renamed to
-	  intel-vpl-gpu-rt.
-
-config BR2_PACKAGE_CGIC
-	bool "cgic has been removed"
-	select BR2_LEGACY
-	help
-	  the cgic upstream no longer exists.
-
-config BR2_PACKAGE_BEECRYPT
-	bool "beecrypt package removed"
-	select BR2_LEGACY
-	help
-	  The beecrypt package was removed as it is not maintained
-	  anymore (no release since 2015).
-
-config BR2_PACKAGE_VERSAL_FIRMWARE
-	bool "versal-firmware has been replaced by xilinx-prebuilt"
-	select BR2_TARGET_XILINX_PREBUILT
-	select BR2_LEGACY
-	help
-	  The versal-firmware package has been replaced by the more
-	  generic xilinx-prebuilt package.
-
-config BR2_KERNEL_HEADERS_6_8
-	bool "kernel headers version 6.8.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 6.8.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_TARGET_AT91BOOTSTRAP
-	bool "at91bootstrap removed"
-	select BR2_LEGACY
-	help
-	  Upstream for at91bootstrap 1.x is no longer available and
-	  has been replaced by at91bootstrap3.
-
-config BR2_TARGET_AT91DATAFLASHBOOT
-	bool "at91dataflashboot removed"
-	select BR2_LEGACY
-	help
-	  at91dataflashboot has been replaced by at91bootstrap3.
-
-config BR2_PACKAGE_ON2_8170_MODULES
-	bool "on2-8170-modules removed"
-	select BR2_LEGACY
-	help
-	  The corresponding library and gstreamer 0.10 plugin are no
-	  longer available.
-
-config BR2_PACKAGE_ON2_8170_LIBS
-	bool "on2-8170-libs removed"
-	select BR2_LEGACY
-	help
-	  Upstream for this binary only library is no longer available.
-
-config BR2_GCC_VERSION_11_X
-	bool "gcc 11.x support removed"
-	select BR2_LEGACY
-	help
-	  Support for gcc version 11.x has been removed. The current
-	  default version (13.x or later) has been selected instead.
-
-config BR2_BINFMT_FLAT_SHARED
-	bool "FLAT shared binary format removed"
-	select BR2_LEGACY
-	help
-	  Support for the FLAT shared binary format has been removed:
-	  its support was removed from the Linux kernel, and also from
-	  uClibc-ng, the only C library that supported it.
-
-config BR2_PACKAGE_OMXPLAYER
-	bool "omxplayer removed"
-	select BR2_LEGACY
-	help
-	  Package was deprecated in 2020 and is broken with ffmpeg 6.x
-
-config BR2_KERNEL_HEADERS_6_7
-	bool "kernel headers version 6.7.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 6.7.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_TARGET_TI_K3_IMAGE_GEN
-	bool "ti-k3-image-gen removed"
-	select BR2_LEGACY
-	help
-	  ti-k3-image-gen tool  has been removed and replaced by
-	  U-Boot binman tool (requires U-boot >= 2023.10).
-
-config BR2_TARGET_UBOOT_NEEDS_TI_K3_DM
-	bool "u-boot TI K3 DM option has been removed."
-	select BR2_LEGACY
-	help
-	  The TI K3 Device Manager is already included in
-	  ti-k3-boot-firmware.
-
-config BR2_PACKAGE_FLUTTER_GALLERY
-	bool "flutter-gallery removed"
-	select BR2_LEGACY
-	help
-	  flutter-gallery has been removed due to being abandoned
-	  and no longer working with flutter 3.19+. It is replaced by
-	  flutter-packages, where individual sub-packages (examples)
-	  must be selected for the build.
-
-config BR2_TOOLCHAIN_EXTERNAL_CODESCAPE_IMG_MIPS
-	bool "Codescape IMG GNU Linux Toolchain 2018.09 has been removed"
-	select BR2_LEGACY
-	help
-	  The Codescape IMG GNU Linux toolchain has been removed, use a
-	  Bootlin toolchain instead.
-
-config BR2_TOOLCHAIN_EXTERNAL_CODESCAPE_MTI_MIPS
-	bool "Codescape MTI GNU Linux Toolchain 2018.09 has been removed"
-	select BR2_LEGACY
-	help
-	  The Codescape MTI GNU Linux toolchain has been removed, use a
-	  Bootlin toolchain instead.
-
-config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_AARCH64
-	bool "CodeSourcery AArch64 2014.11 has been removed"
-	select BR2_LEGACY
-	help
-	  The Sourcery CodeBench AArch64 toolchain has been removed,
-	  use an ARM/Bootlin/Linaro toolchain instead.
-
-config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM
-	bool "Sourcery CodeBench ARM 2014.05 has been removed"
-	select BR2_LEGACY
-	help
-	  The Sourcery CodeBench ARM toolchain has been removed, use
-	  an ARM/Bootlin/Linaro toolchain instead.
-
-config BR2_BINUTILS_VERSION_2_39_X
-	bool "binutils 2.39 has been removed"
-	select BR2_LEGACY
-	help
-	  binutils 2.39 has been removed, use a newer version.
-
-comment "Legacy options removed in 2024.02"
-
-config BR2_PACKAGE_MYSQL
-	bool "mysql virtual package removed"
-	select BR2_LEGACY
-	help
-	  The mysql virtual package has been removed as mariadb is the
-	  only supported mysql variant. Use the mariadb package
-	  instead.
-
-config BR2_PACKAGE_ORACLE_MYSQL
-	bool "oracle mysql removed"
-	select BR2_LEGACY
-	help
-	  Oracle mysql has been removed as the package was
-	  unmaintained. Consider using mariadb instead.
-
-config BR2_PACKAGE_STRONGSWAN_SCEP
-	bool "strongswan SCEP client tool removed"
-	select BR2_LEGACY
-	help
-	  "ipsec scepclient" tool has been removed and replaced by the
-	  pki subcommands "pki --scep" and "pki --scepca" which
-	  implement the new SCEP RFC 8894 standard that was released in
-	  September 2020 and which supports trusted "certificate
-	  renewal" based on the existing client certificate.
-
-config BR2_PACKAGE_SHADOW_UTMPX
-	bool "shadow utmpx removed"
-	select BR2_LEGACY
-	help
-	  UTMPX has been dropped by upstream.
-
-config BR2_PACKAGE_TINYMEMBENCH
-	bool "tinymembench removed"
-	select BR2_LEGACY
-	help
-	  tinymembench has been removed due to being abandoned.
-
-config BR2_PACKAGE_DAVINCI_BOOTCOUNT
-	bool "davinci-bootcount has been renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_UBOOT_BOOTCOUNT
-	help
-	  The davinci-bootcount package has been renamed to
-	  uboot-bootcount.
-
-config BR2_PACKAGE_PYTHON_CROSSBAR
-	bool "python-crossbar removed"
-	select BR2_LEGACY
-	help
-	  python-crossbar has been removed. The current package has
-	  not received an update since Sat Oct 9 13:55:06 2021 commit:
-	  33ece2446e25e20929d1c7eefa9f3244a3b79a92 and is not python
-	  3.12.0 compatible.
-
-	  Furthermore, the current version requires at least 42 new
-	  packages worth of depedencies of which several require
-	  patches to be python 3.12.0 compatible. As nobody has
-	  stepped up to maintain the package and its ever-growing list
-	  of dependencies, along with the other problems, it was time
-	  to drop the package.
-
-config BR2_PACKAGE_PYTHON_PYGAME
-	bool "python-pygame removed"
-	select BR2_LEGACY
-	help
-	  python-pygame has been removed due to being abandoned and
-	  the old version no longer building with python 3.12.0.
-
-config BR2_KERNEL_HEADERS_4_14
-	bool "kernel headers version 4.14.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 4.14.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
+comment "Legacy options removed in 2023.11"

 config BR2_PACKAGE_LIBCAMERA_PIPELINE_RASPBERRYPI
 	bool "libcamera pipeline 'raspberrypi' was renamed to 'rpi/vc4'"
@@ -586,109 +153,8 @@ config BR2_PACKAGE_LIBCAMERA_PIPELINE_RASPBERRYPI
 	select BR2_LEGACY
 	select BR2_PACKAGE_LIBCAMERA_PIPELINE_RPI_VC4
 	help
-	  Since version 0.1.0, the pipeline option 'raspberrypi' was
-	  renamed to 'rpi/vc4'.
-
-config BR2_GDB_VERSION_11
-	bool "gdb 11.x removed"
-	select BR2_LEGACY
-	help
-	  GDB 11.x has been removed, use a newer version.
-
-config BR2_PACKAGE_LIBMPD
-	bool "libmpd package was removed"
-	select BR2_LEGACY
-	help
-	  The libmpd package was only used by gmpc, both of which are
-	  no longer maintained upstream.
-
-config BR2_PACKAGE_GMPC
-	bool "gmpc package was removed"
-	select BR2_LEGACY
-	help
-	  The gmpc package was removed because it was unmaintained,
-	  and still using the old libsoup2 library.
-
-config BR2_PACKAGE_FLICKCURL
-	bool "flickcurl package was removed"
-	select BR2_LEGACY
-	help
-	  The flickcurl package was removed because it was
-	  unmaintained upstream and causing build failures.
-
-config BR2_PACKAGE_ONEVPL
-	bool "onevpl package was renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_LIBVPL
-
-config BR2_KERNEL_HEADERS_6_5
-	bool "kernel headers version 6.5.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 6.5.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_PACKAGE_WATCHDOGD_GENERIC_POLL
-	int "watchdogd generic poll has been replaced"
-	default 0
-	help
-	  The generic script poll interval has been replaced upstream
-	  with a boolean on/off.  Your configuration has been migrated.
-
-	  Set this legacy option to 0 here to remove the warning.
-
-# Note: BR2_PACKAGE_WATCHDOGD_*_POLL_WRAP referenced in package/watchdogd/Config.in
-config BR2_PACKAGE_WATCHDOGD_GENERIC_POLL_WRAP
-	bool
-	default y if BR2_PACKAGE_WATCHDOGD_GENERIC_POLL != 0
-	select BR2_LEGACY
-
-config BR2_PACKAGE_WATCHDOGD_LOADAVG_POLL
-	int "watchdogd loadavg poll has been replaced"
-	default 0
-	help
-	  The CPU load average poll interval has been replaced upstream
-	  with a boolean on/off.  Your configuration has been migrated.
-
-	  Set this legacy option to 0 here to remove the warning.
-
-# Note: BR2_PACKAGE_WATCHDOGD_*_POLL_WRAP referenced in package/watchdogd/Config.in
-config BR2_PACKAGE_WATCHDOGD_LOADAVG_POLL_WRAP
-	bool
-	default y if BR2_PACKAGE_WATCHDOGD_LOADAVG_POLL != 0
-	select BR2_LEGACY
-
-config BR2_PACKAGE_WATCHDOGD_FILENR_POLL
-	int "watchdogd filenr poll has been replaced"
-	default 0
-	help
-	  The file descriptor leak poll has been replaced upstream with
-	  a boolean on/off.  Your configuration has been migrated.
-
-	  Set this legacy option to 0 here to remove the warning.
-
-# Note: BR2_PACKAGE_WATCHDOGD_*_POLL_WRAP referenced in package/watchdogd/Config.in
-config BR2_PACKAGE_WATCHDOGD_FILENR_POLL_WRAP
-	bool
-	default y if BR2_PACKAGE_WATCHDOGD_FILENR_POLL != 0
-	select BR2_LEGACY
-
-config BR2_PACKAGE_WATCHDOGD_MEMINFO_POLL
-	int "watchdogd meminfo poll has been replaced"
-	default 0
-	help
-	  The memleak detector poll interval has been replaced upstream
-	  with a boolean on/off.  Your configuration has been migrated.
-
-	  Set this legacy option to 0 here to remove the warning.
-
-# Note: BR2_PACKAGE_WATCHDOGD_*_POLL_WRAP referenced in package/watchdogd/Config.in
-config BR2_PACKAGE_WATCHDOGD_MEMINFO_POLL_WRAP
-	bool
-	default y if BR2_PACKAGE_WATCHDOGD_MEMINFO_POLL != 0
-	select BR2_LEGACY
-
-comment "Legacy options removed in 2023.11"
+	  Since version 0.1.0 the libcamera pipeline option
+	  'raspberrypi' was renamed to 'rpi/vc4'.

 config BR2_PACKAGE_PYTHON_PYXB
 	bool "python-pyxb removed"
@@ -1282,6 +748,12 @@ config BR2_PACKAGE_PYTHON_DIALOG
 	help
 	  Package was removed together with python 2.7 support.

+config BR2_PACKAGE_PYTHON_CONFIGOBJ
+	bool "python-configobj removed"
+	select BR2_LEGACY
+	help
+	  Package was removed together with python 2.7 support.
+
 config BR2_PACKAGE_PYTHON_YIELDFROM
 	bool "python-yieldfrom removed"
 	select BR2_LEGACY
@@ -66,14 +66,13 @@ endif
 CANONICAL_CURDIR = $(realpath $(CURDIR))

 REQ_UMASK = 0022
-CUR_UMASK := $(shell umask)

 # Make sure O= is passed (with its absolute canonical path) everywhere the
 # toplevel makefile is called back.
 EXTRAMAKEARGS := O=$(CANONICAL_O)

 # Check Buildroot execution pre-requisites here.
-ifneq ($(CUR_UMASK):$(CURDIR):$(O),$(REQ_UMASK):$(CANONICAL_CURDIR):$(CANONICAL_O))
+ifneq ($(shell umask):$(CURDIR):$(O),$(REQ_UMASK):$(CANONICAL_CURDIR):$(CANONICAL_O))
 .PHONY: _all $(MAKECMDGOALS)

 $(MAKECMDGOALS): _all
@@ -82,7 +81,6 @@ $(MAKECMDGOALS): _all
 _all:
 	@umask $(REQ_UMASK) && \
 		$(MAKE) -C $(CANONICAL_CURDIR) --no-print-directory \
-			BR_ORIG_UMASK=$(CUR_UMASK) \
 			$(MAKECMDGOALS) $(EXTRAMAKEARGS)

 else # umask / $(CURDIR) / $(O)
@@ -92,9 +90,9 @@ all:
 .PHONY: all

 # Set and export the version string
-export BR2_VERSION := 2024.11-rc2
+export BR2_VERSION := 2023.11.1
 # Actual time the release is cut (for reproducible builds)
-BR2_VERSION_EPOCH = 1732356000
+BR2_VERSION_EPOCH = 1705314000

 # Save running make version since it's clobbered by the make package
 RUNNING_MAKE_VERSION := $(MAKE_VERSION)
@@ -446,7 +444,6 @@ ZCAT := $(call qstrip,$(BR2_ZCAT))
 BZCAT := $(call qstrip,$(BR2_BZCAT))
 XZCAT := $(call qstrip,$(BR2_XZCAT))
 LZCAT := $(call qstrip,$(BR2_LZCAT))
-ZSTDCAT := $(call qstrip,$(BR2_ZSTDCAT))
 TAR_OPTIONS = $(call qstrip,$(BR2_TAR_OPTIONS)) -xf

 ifeq ($(BR2_PER_PACKAGE_DIRECTORIES),y)
@@ -587,17 +584,21 @@ $(BUILD_DIR)/buildroot-config/auto.conf: $(BR2_CONFIG)
 prepare: $(BUILD_DIR)/buildroot-config/auto.conf
 	@$(foreach s, $(call qstrip,$(BR2_ROOTFS_PRE_BUILD_SCRIPT)), \
 		$(call MESSAGE,"Executing pre-build script $(s)"); \
-		$(EXTRA_ENV) $(s) \
-			$(TARGET_DIR) \
-			$(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS)) \
-			$(call qstrip,$(BR2_ROOTFS_PRE_BUILD_SCRIPT_ARGS))$(sep))
+		$(EXTRA_ENV) $(s) $(TARGET_DIR) $(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS))$(sep))

 .PHONY: world
 world: target-post-image

 .PHONY: prepare-sdk
 prepare-sdk: world
-	@$(call MESSAGE,"Preparing the SDK")
+	@$(call MESSAGE,"Rendering the SDK relocatable")
+	PARALLEL_JOBS=$(PARALLEL_JOBS) \
+		PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) \
+		$(TOPDIR)/support/scripts/fix-rpath host
+	PARALLEL_JOBS=$(PARALLEL_JOBS) \
+		PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) \
+		$(TOPDIR)/support/scripts/fix-rpath staging
+	$(call ppd-fixup-paths,$(BASE_DIR))
 	$(INSTALL) -m 755 $(TOPDIR)/support/misc/relocate-sdk.sh $(HOST_DIR)/relocate-sdk.sh
 	mkdir -p $(HOST_DIR)/share/buildroot
 	echo $(HOST_DIR) > $(HOST_DIR)/share/buildroot/sdk-location
@@ -715,13 +716,6 @@ STAGING_DIR_FILES_LISTS = $(sort $(wildcard $(BUILD_DIR)/*/.files-list-staging.t
 host-finalize: $(PACKAGES) $(HOST_DIR) $(HOST_DIR_SYMLINK)
 	@$(call MESSAGE,"Finalizing host directory")
 	$(call per-package-rsync,$(sort $(PACKAGES)),host,$(HOST_DIR),copy)
-	$(Q)PARALLEL_JOBS=$(PARALLEL_JOBS) \
-		PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) \
-		$(TOPDIR)/support/scripts/fix-rpath host
-	$(Q)PARALLEL_JOBS=$(PARALLEL_JOBS) \
-		PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) \
-		$(TOPDIR)/support/scripts/fix-rpath staging
-	$(call ppd-fixup-paths,$(BASE_DIR))

 .PHONY: staging-finalize
 staging-finalize: $(STAGING_DIR_SYMLINK)
@@ -807,10 +801,7 @@ endif # merged /usr

 	$(foreach s, $(call qstrip,$(BR2_ROOTFS_POST_BUILD_SCRIPT)), \
 		@$(call MESSAGE,"Executing post-build script $(s)")$(sep) \
-		$(Q)$(EXTRA_ENV) $(s) \
-			$(TARGET_DIR) \
-			$(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS)) \
-			$(call qstrip,$(BR2_ROOTFS_POST_BUILD_SCRIPT_ARGS))$(sep))
+		$(Q)$(EXTRA_ENV) $(s) $(TARGET_DIR) $(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS))$(sep))

 	touch $(TARGET_DIR)/usr

@@ -828,10 +819,7 @@ target-post-image: $(TARGETS_ROOTFS) target-finalize staging-finalize
 	$(Q)mkdir -p $(BINARIES_DIR)
 	@$(foreach s, $(call qstrip,$(BR2_ROOTFS_POST_IMAGE_SCRIPT)), \
 		$(call MESSAGE,"Executing post-image script $(s)"); \
-		$(EXTRA_ENV) $(s) \
-			$(BINARIES_DIR) \
-			$(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS)) \
-			$(call qstrip,$(BR2_ROOTFS_POST_IMAGE_SCRIPT_ARGS))$(sep))
+		$(EXTRA_ENV) $(s) $(BINARIES_DIR) $(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS))$(sep))

 .PHONY: source
 source: $(foreach p,$(PACKAGES),$(p)-all-source)
@@ -1172,9 +1160,6 @@ help:
 	@echo '                         - Recursively list packages which have <pkg> as a dependency'
 	@echo '  <pkg>-graph-depends    - Generate a graph of <pkg>'\''s dependencies'
 	@echo '  <pkg>-graph-rdepends   - Generate a graph of <pkg>'\''s reverse dependencies'
-	@echo '  <pkg>-graph-both-depends'
-	@echo '                         - Generate a graph of both <pkg>'\''s forward and'
-	@echo '                           reverse dependencies.'
 	@echo '  <pkg>-dirclean         - Remove <pkg> build directory'
 	@echo '  <pkg>-reconfigure      - Restart the build from the configure step'
 	@echo '  <pkg>-rebuild          - Restart the build from the build step'
@@ -12,9 +12,6 @@ config BR2_SOFT_FLOAT
 config BR2_USE_MMU
 	bool

-config BR2_ARCH_HAS_FDPIC_SUPPORT
-	bool
-
 choice
 	prompt "Target Architecture"
 	default BR2_i386
@@ -219,6 +216,11 @@ config BR2_sh
 config BR2_sparc
 	bool "SPARC"
 	select BR2_USE_MMU
+	# uClibc-ng broken on sparc due to recent gcc changes
+	# that need to be reverted since gcc 8.4, 9.3 and 10.1.
+	# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98784
+	# gcc <= 10.x has been removed from Buildroot.
+	select BR2_ARCH_HAS_NO_TOOLCHAIN_BUILDROOT
 	help
 	  SPARC (from Scalable Processor Architecture) is a RISC
 	  instruction set architecture (ISA) developed by Sun
@@ -311,14 +313,6 @@ config BR2_ARCH_NEEDS_GCC_AT_LEAST_13
 	bool
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_12

-config BR2_ARCH_NEEDS_GCC_AT_LEAST_14
-	bool
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_13
-
-config BR2_ARCH_NEEDS_GCC_AT_LEAST_15
-	bool
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_14
-
 # The following string values are defined by the individual
 # Config.in.$ARCH files
 config BR2_ARCH
@@ -444,16 +438,6 @@ config BR2_BINFMT_ELF
 	  and executables used across different architectures and
 	  operating systems.

-config BR2_BINFMT_FDPIC
-	bool "FDPIC"
-	depends on BR2_ARCH_HAS_FDPIC_SUPPORT
-	select BR2_BINFMT_SUPPORTS_SHARED
-	help
-	  ELF FDPIC binaries are based on ELF, but allow the individual
-	  load segments of a binary to be located in memory
-	  independently of each other. This makes this format ideal for
-	  use in environments where no MMU is available.
-
 config BR2_BINFMT_FLAT
 	bool "FLAT"
 	depends on !BR2_USE_MMU
@@ -464,4 +448,29 @@ config BR2_BINFMT_FLAT

 endchoice

+# Set up flat binary type
+choice
+	prompt "FLAT Binary type"
+	default BR2_BINFMT_FLAT_ONE
+	depends on BR2_BINFMT_FLAT
+
+config BR2_BINFMT_FLAT_ONE
+	bool "One memory region"
+	help
+	  All segments are linked into one memory region.
+
+config BR2_BINFMT_FLAT_SHARED
+	bool "Shared binary"
+	depends on BR2_m68k
+	# Even though this really generates shared binaries, there is no libdl
+	# and dlopen() cannot be used. So packages that require shared
+	# libraries cannot be built. Therefore, we don't select
+	# BR2_BINFMT_SUPPORTS_SHARED and therefore force BR2_STATIC_LIBS.
+	# Although this adds -static to the compilation, that's not a problem
+	# because the -mid-shared-library option overrides it.
+	help
+	  Allow to load and link indiviual FLAT binaries at run time.
+
+endchoice
+
 endmenu # Target options
@@ -3,7 +3,7 @@ choice
 	default BR2_arc770d
 	depends on BR2_arc
 	help
-	  Specific CPU to use
+	    Specific CPU to use

 config BR2_arc750d
 	bool "ARC 750D"
@@ -40,12 +40,12 @@ config BR2_archs38_full
 config BR2_archs4x_rel31
 	bool "ARC HS48 rel 31"
 	help
-	  Build for HS48 release 3.1
+	   Build for HS48 release 3.1

 config BR2_archs4x
 	bool "ARC HS48"
 	help
-	  Latest release of HS48 processor
+	   Latest release of HS48 processor
 	   - Dual and Quad multiply and MAC operations
 	   - Double-precision FPU

@@ -89,7 +89,6 @@ config BR2_ARM_CPU_ARMV7A

 config BR2_ARM_CPU_ARMV7M
 	bool
-	select BR2_ARCH_HAS_FDPIC_SUPPORT

 config BR2_ARM_CPU_ARMV8A
 	bool
@@ -782,9 +781,6 @@ choice
 config BR2_ARM64_PAGE_SIZE_4K
 	bool "4KB"

-config BR2_ARM64_PAGE_SIZE_16K
-	bool "16KB"
-
 config BR2_ARM64_PAGE_SIZE_64K
 	bool "64KB"

@@ -793,7 +789,6 @@ endchoice
 config BR2_ARM64_PAGE_SIZE
 	string
 	default "4K" if BR2_ARM64_PAGE_SIZE_4K
-	default "16K" if BR2_ARM64_PAGE_SIZE_16K
 	default "64K" if BR2_ARM64_PAGE_SIZE_64K

 config BR2_ARCH
@@ -23,11 +23,6 @@ choice
 	help
 	  Specific CPU variant to use

-config BR2_m68k_68030
-	bool "68030"
-	select BR2_m68k_m68k
-	select BR2_USE_MMU
-
 config BR2_m68k_68040
 	bool "68040"
 	select BR2_m68k_m68k
@@ -41,7 +36,6 @@ config BR2_m68k_cf5208
 endchoice

 config BR2_GCC_TARGET_CPU
-	default "68030"		if BR2_m68k_68030
 	default "68040"		if BR2_m68k_68040
 	default "5208"		if BR2_m68k_cf5208

@@ -51,6 +51,7 @@ choice

 config BR2_RISCV_32
 	bool "32-bit"
+	select BR2_USE_MMU

 config BR2_RISCV_64
 	bool "64-bit"
@@ -61,6 +62,7 @@ endchoice
 config BR2_RISCV_USE_MMU
 	bool "MMU support"
 	default y
+	depends on BR2_RISCV_64
 	select BR2_USE_MMU
 	help
 	  Enable this option if your RISC-V core has a MMU (Memory
@@ -72,7 +72,6 @@ config BR2_x86_pentium_m
 	depends on !BR2_x86_64
 	select BR2_X86_CPU_HAS_MMX
 	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
 config BR2_x86_pentium2
 	bool "pentium2"
 	depends on !BR2_x86_64
@@ -379,6 +378,30 @@ config BR2_x86_grandridge
 	select BR2_X86_CPU_HAS_AVX
 	select BR2_X86_CPU_HAS_AVX2
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_13
+config BR2_x86_knightslanding
+	bool "knightslanding"
+	select BR2_X86_CPU_HAS_MMX
+	select BR2_X86_CPU_HAS_SSE
+	select BR2_X86_CPU_HAS_SSE2
+	select BR2_X86_CPU_HAS_SSE3
+	select BR2_X86_CPU_HAS_SSSE3
+	select BR2_X86_CPU_HAS_SSE4
+	select BR2_X86_CPU_HAS_SSE42
+	select BR2_X86_CPU_HAS_AVX
+	select BR2_X86_CPU_HAS_AVX2
+	select BR2_ARCH_NEEDS_GCC_AT_LEAST_5
+config BR2_x86_knightsmill
+	bool "knightsmill"
+	select BR2_X86_CPU_HAS_MMX
+	select BR2_X86_CPU_HAS_SSE
+	select BR2_X86_CPU_HAS_SSE2
+	select BR2_X86_CPU_HAS_SSE3
+	select BR2_X86_CPU_HAS_SSSE3
+	select BR2_X86_CPU_HAS_SSE4
+	select BR2_X86_CPU_HAS_SSE42
+	select BR2_X86_CPU_HAS_AVX
+	select BR2_X86_CPU_HAS_AVX2
+	select BR2_ARCH_NEEDS_GCC_AT_LEAST_8
 config BR2_x86_skylake_avx512
 	bool "skylake-avx512"
 	select BR2_X86_CPU_HAS_MMX
@@ -767,6 +790,8 @@ config BR2_GCC_TARGET_ARCH
 	default "tremont"	if BR2_x86_tremont
 	default "sierraforest"	if BR2_x86_sierraforest
 	default "grandridge"	if BR2_x86_grandridge
+	default "knl"		if BR2_x86_knightslanding
+	default "knm"		if BR2_x86_knightsmill
 	default "skylake-avx512" if BR2_x86_skylake_avx512
 	default "cannonlake"	if BR2_x86_cannonlake
 	default "icelake-client" if BR2_x86_icelake_client
@@ -23,7 +23,7 @@ ifeq ($(BR2_ARC_PAGE_SIZE_4K)$(BR2_ARM64_PAGE_SIZE_4K),y)
 ARCH_TOOLCHAIN_WRAPPER_OPTS += -Wl,-z,max-page-size=4096 -Wl,-z,common-page-size=4096
 else ifeq ($(BR2_ARC_PAGE_SIZE_8K),y)
 ARCH_TOOLCHAIN_WRAPPER_OPTS += -Wl,-z,max-page-size=8192 -Wl,-z,common-page-size=8192
-else ifeq ($(BR2_ARC_PAGE_SIZE_16K)$(BR2_ARM64_PAGE_SIZE_16K),y)
+else ifeq ($(BR2_ARC_PAGE_SIZE_16K),y)
 ARCH_TOOLCHAIN_WRAPPER_OPTS += -Wl,-z,max-page-size=16384 -Wl,-z,common-page-size=16384
 else ifeq ($(BR2_ARM64_PAGE_SIZE_64K),y)
 ARCH_TOOLCHAIN_WRAPPER_OPTS += -Wl,-z,max-page-size=65536 -Wl,-z,common-page-size=65536
@@ -1 +0,0 @@
-../linux/linux.hash
@@ -1,2 +0,0 @@
-# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc
-sha256  524858852f5869a9ef17de8b1e6e7faf05bcb2c462bc96b3c24dbf82ede373cf  linux-6.10.12.tar.xz
@@ -1,5 +1,5 @@
 #!/bin/sh

-BOARD_DIR=$(dirname "$0")
+BOARD_DIR="$(dirname $0)"

-cp -f "${BOARD_DIR}/grub.cfg" "${BINARIES_DIR}/efi-part/EFI/BOOT/grub.cfg"
+cp -f ${BOARD_DIR}/grub.cfg ${BINARIES_DIR}/efi-part/EFI/BOOT/grub.cfg
@@ -9,7 +9,7 @@
 * Licensed under GPLv2 or later.
 */
 /dts-v1/;
-#include "microchip/sama5d31.dtsi"
+#include "sama5d31.dtsi"

 / {
 	model = "Acme Systems Acqua SOM";
@@ -149,14 +149,8 @@
 					#address-cells = <1>;
 					#size-cells = <1>;

-					nvmem-layout {
-						compatible = "fixed-layout";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						eth0_addr: eth-mac-addr@9A {
-							reg = <0x0 0x06>;
-						};
+					eth0_addr: eth-mac-addr@9A {
+						reg = <0x0 0x06>;
 					};
 				};
 				
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  5ea2a8fed1ba0024229c6f6d77176679e1b24791bdbce8e285634013d4a93551  at91bootstrap3-v3.10.3-git4.tar.gz
@@ -1 +0,0 @@
-../linux/linux.hash
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  b66a5b863b0f8669448b74ca83bd641a856f164b29956e539bbcb5fdeeab9cc6  linux-6.6.30.tar.xz
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  5ea2a8fed1ba0024229c6f6d77176679e1b24791bdbce8e285634013d4a93551  at91bootstrap3-v3.10.3-git4.tar.gz
@@ -1 +0,0 @@
-../linux/linux.hash
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  6c5e4d3c87feadbfdb9f7d2e46f3f120b00286ba380491c5956708e0b94232c8  linux-4.19.315.tar.xz
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  5ea2a8fed1ba0024229c6f6d77176679e1b24791bdbce8e285634013d4a93551  at91bootstrap3-v3.10.3-git4.tar.gz
@@ -1 +0,0 @@
-../linux/linux.hash
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  6c5e4d3c87feadbfdb9f7d2e46f3f120b00286ba380491c5956708e0b94232c8  linux-4.19.315.tar.xz
@@ -1 +0,0 @@
-../linux/linux.hash
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  880ace63ca2291b8b639e9bd862cc828649d3e1e00ccfee5861473debd2e4dec  linux-6.1.91.tar.xz
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  50b4482a505bc281ba8470c399a3c26e145e29b23500bc35c50debd7fa46bdf8  u-boot-2022.10.tar.bz2
@@ -41,49 +41,6 @@ After building, you should obtain the following files:
  |-- u-boot-spl.bin
  `-- u-boot.itb

-How to update the bootloader and device-tree
-============================================
-
-To update the bootloader and device tree, make sure you have
-an ICEman (Andes OpenOCD [1]) and AICE [2] connection set up
-as below:
-
-  Local Host                 Local/Remote Host
- .-----------------.          .--------------.
- | buildroot images|          |              |
- |                 |         ICEman host <IP:PORT>
- | .----------.    |          |  .--------.  |
- | | SPI_burn |<---+--socket--+->| ICEman |  |
- | '----------'    |          |  '--.-----'  |
- '-----------------'          '-----|--------'
-                                    |
-                                    USB
-   .--------------.                 |
-   | target       |           .-----v-----.
-   | board        <----JTAG---| AICE      |
-   |              |           '-----------'
-   '--------------'
-
-[1] https://github.com/andestech/ICEman
-[2] https://www.andestech.com/en/products-solutions/andeshape-platforms/aice-micro/
-
-The Andes SPI_burn tool will be located in output/host/bin. Use
-the following commands to update the bootloader and device tree:
-
-  $ SPI_burn --host $ICE_IP --port $ICE_BURNER_PORT --addr 0x0     -i u-boot-spl.bin
-  $ SPI_burn --host $ICE_IP --port $ICE_BURNER_PORT --addr 0x10000 -i u-boot.itb
-  $ SPI_burn --host $ICE_IP --port $ICE_BURNER_PORT --addr 0xf0000 -i ae350_ax45mp.dtb
-
-Note that the --addr option specifies the offset starting from
-the flash base address 0x80000000 and set by U-Boot configurations.
-e.g.
-u-boot-spl.bin  : CONFIG_SPL_TEXT_BASE=0x80000000
-u-boot.itb      : CONFIG_SPL_LOAD_FIT_ADDRESS=0x80010000
-ae350_ax45mp.dtb: CONFIG_SYS_FDT_BASE=0x800f0000
-
-How to write the SD card
-========================
-
 Copy the sdcard.img to a SD card with "dd":

  $ sudo dd if=sdcard.img of=/dev/sdX bs=4096
@@ -1,5 +1,6 @@
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_MMC=y
+# CONFIG_SPL_RAM_SUPPORT is not set
 CONFIG_SPL_OPENSBI_LOAD_ADDR=0x0
 CONFIG_SPL_OPENSBI_SCRATCH_OPTIONS=0x0
 CONFIG_DISPLAY_CPUINFO=y
@@ -1 +0,0 @@
-../linux/linux.hash
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  b0bb92d982f88380e5b2059349c3a862e0afa712e0646eb0e082b9c2c5cb5176  linux-6.8.10.tar.xz
@@ -3,7 +3,7 @@ ARM software simulator of the AArch64 architecture.

 First, one has to download the AArch64 software simulator from:

-  https://developer.arm.com/-/media/Files/downloads/ecosystem-models/FM_11_25/Foundation_Platform_11.25_15_Linux64.tgz
+  https://armkeil.blob.core.windows.net/developer/Files/downloads/ecosystem-models/Foundation_Platform_11.20_15_Linux64.tgz

 Then, use the arm_foundationv8_defconfig configuration to build your
 Buildroot system.
@@ -1,15 +0,0 @@
-# Arm A-Profile Base RevC AEM FVP config
-bp.secure_memory=1
-bp.ve_sysregs.exit_on_shutdown=1
-cache_state_modelled=0
-cluster0.NUM_CORES=4
-cluster0.cpu0.enable_crc32=1
-cluster0.cpu1.enable_crc32=1
-cluster0.cpu2.enable_crc32=1
-cluster0.cpu3.enable_crc32=1
-cluster1.NUM_CORES=4
-cluster1.cpu0.enable_crc32=1
-cluster1.cpu1.enable_crc32=1
-cluster1.cpu2.enable_crc32=1
-cluster1.cpu3.enable_crc32=1
-pctl.startup=0.0.0.0
@@ -1,18 +0,0 @@
-/*
- * Copyright (c) 2024, ARM Limited and Contributors. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#include "fvp-base-gicv3-psci-1t.dts"
-
-/* The TF-A Devicetree does not have the OP-TEE node; let's add it. */
-
-/ {
-	firmware {
-		optee {
-			compatible = "linaro,optee-tz";
-			method = "smc";
-		};
-	};
-};
@@ -1,31 +0,0 @@
-image efi-part.vfat {
-	vfat {
-		file EFI {
-			image = "efi-part/EFI"
-		}
-
-		file Image {
-			image = "Image"
-		}
-	}
-
-	size = 128M
-}
-
-image disk.img {
-	hdimage {
-		partition-table-type = "gpt"
-	}
-
-	partition boot {
-		image = "efi-part.vfat"
-		partition-type-uuid = U
-		offset = 32K
-		bootable = true
-	}
-
-	partition root {
-		partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
-		image = "rootfs.ext2"
-	}
-}
@@ -1,6 +0,0 @@
-set default="0"
-set timeout="5"
-
-menuentry "Buildroot" {
-	linux /Image root=PARTLABEL=root rootwait
-}
@@ -1 +0,0 @@
-../linux/linux.hash
@@ -1,2 +0,0 @@
-# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc
-sha256  524858852f5869a9ef17de8b1e6e7faf05bcb2c462bc96b3c24dbf82ede373cf  linux-6.10.12.tar.xz
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  f591da9ab90ef3d6b3d173766d0ddff90c4ed7330680897486117df390d83c8f  u-boot-2024.07.tar.bz2
@@ -1,7 +0,0 @@
-#!/bin/sh
-set -eu
-
-BOARD_DIR=$(dirname "$0")
-
-# Override the default GRUB configuration file with our own.
-cp -f "${BOARD_DIR}/grub.cfg" "${BINARIES_DIR}/efi-part/EFI/BOOT/grub.cfg"
@@ -1,73 +0,0 @@
-Introduction
-============
-
-The arm_fvp_ebbr_defconfig is meant to illustrate some aspects of the Arm EBBR
-specification[1] and the Arm SystemReady IR[2] compliance program.
-It allows building an AArch64 U-Boot based firmware implementing the subset of
-UEFI defined by EBBR, as well as a Linux OS disk image booting with UEFI, to run
-on the Arm A-Profile Base RevC AEM FVP.
-
-Building
-========
-
-  $ make arm_fvp_ebbr_defconfig
-  $ make
-
-Generated files under output/images:
-
-* bl1.bin: A ROM image built from TF-A.
-* fip.bin: A firmware image comprising TF-A, OP-TEE and the U-Boot bootloader.
-* disk.img: An OS disk image comprising the GRUB bootloader, the Linux kernel
-  and the root filesystem.
-
-Running on the FVP
-==================
-
-Download the FVP from one of the following sources, corresponding to your host
-computer:
-
- https://developer.arm.com/-/cdn-downloads/permalink/Fixed-Virtual-Platforms/FM-11.27/FVP_Base_RevC-2xAEMvA_11.27_19_Linux64.tgz
- https://developer.arm.com/-/cdn-downloads/permalink/Fixed-Virtual-Platforms/FM-11.27/FVP_Base_RevC-2xAEMvA_11.27_19_Linux64_armv8l.tgz
-
-The FVP will be located under one of the corresponding folders:
-
- Base_RevC_AEMvA_pkg/models/Linux64_GCC-9.3
- Base_RevC_AEMvA_pkg/models/Linux64_armv8l_GCC-9.3
-
-Run the simulation with:
-
-  FVP_Base_RevC-2xAEMvA \
-      --config-file board/arm/fvp-ebbr/fvp-config.txt \
-      -C bp.secureflashloader.fname="output/images/bl1.bin" \
-      -C bp.flashloader0.fname="output/images/fip.bin" \
-      -C bp.virtioblockdevice.image_path="output/images/disk.img"
-
-The login prompt will appear in a new X terminal.
-
-Using the EBBR firmware to run another OS on the FVP
----------------------------------------------------
-
-It is possible to use the generated firmware binaries to run another OS
-supporting the EBBR specification.
-
-To run another OS on simulation using a live or pre-installed image, use the
-same FVP command line as for the generated OS but adapt the OS image path in the
-virtioblockdevice stanza.
-The image generated by the aarch64_efi_defconfig or the Arm ACS-IR images[3] are
-examples of pre-installed OS images.
-Linux distributions such as Debian, Fedora, openSUSE or Ubuntu provide a
-pre-installed OS image.
-
-Miscellaneous
-=============
-
-This configuration is inspired by the arm_foundationv8_defconfig, the
-qemu_aarch64_virt_defconfig and the Arm SystemReady IR IoT Integration, Test,
-and Certification Guide[4].
-
-Firmware update, MMC and network are currently not supported.
-
-[1]: https://github.com/ARM-software/ebbr
-[2]: https://developer.arm.com/Architectures/Arm%20SystemReady%20IR
-[3]: https://github.com/ARM-software/arm-systemready/tree/main/IR/prebuilt_images
-[4]: https://developer.arm.com/documentation/DUI1101/latest/
@@ -1,49 +0,0 @@
-# CONFIG_USE_BOOTCOMMAND is not set
-CONFIG_BOOTCOMMAND="bootflow scan -lb"
-CONFIG_BOOTMETH_DISTRO=y
-CONFIG_BOOTM_EFI=y
-CONFIG_BOOTSTD_BOOTCOMMAND=y
-CONFIG_BOOTSTD_DEFAULTS=y
-CONFIG_BOOTSTD_FULL=y
-CONFIG_CMD_BOOTDEV=y
-CONFIG_CMD_BOOTEFI=y
-CONFIG_CMD_BOOTEFI_HELLO=y
-CONFIG_CMD_BOOTEFI_HELLO_COMPILE=y
-CONFIG_CMD_BOOTEFI_SELFTEST=y
-CONFIG_CMD_BOOTMETH=y
-CONFIG_CMD_DM=y
-CONFIG_CMD_EFIDEBUG=y
-CONFIG_CMD_EFI_VARIABLE_FILE_STORE=y
-CONFIG_CMD_GETTIME=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_NVEDIT_EFI=y
-CONFIG_CMD_RNG=y
-CONFIG_CMD_RTC=y
-CONFIG_CMD_TIME=y
-CONFIG_DM_RNG=y
-CONFIG_DM_RTC=y
-CONFIG_EFI_DEVICE_PATH_TO_TEXT=y
-CONFIG_EFI_GET_TIME=y
-CONFIG_EFI_HAVE_RUNTIME_RESET=y
-CONFIG_EFI_LOADER=y
-CONFIG_EFI_LOADER_HII=y
-CONFIG_EFI_MM_COMM_TEE=y
-CONFIG_EFI_PARTITION=y
-CONFIG_EFI_SECURE_BOOT=y
-CONFIG_EFI_SET_TIME=y
-CONFIG_EFI_UNICODE_CAPITALIZATION=y
-CONFIG_EFI_UNICODE_COLLATION_PROTOCOL2=y
-CONFIG_EFI_VARIABLE_FILE_STORE=y
-CONFIG_FAT_WRITE=y
-CONFIG_FIT=y
-CONFIG_FS_FAT=y
-CONFIG_ISO_PARTITION=y
-CONFIG_MISC=y
-CONFIG_OF_CONTROL=y
-CONFIG_OF_LIBFDT=y
-CONFIG_OPTEE=y
-CONFIG_PARTITION_TYPE_GUID=y
-CONFIG_RNG_OPTEE=y
-CONFIG_TEE=y
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_VEXPRESS_CONFIG=y
@@ -3,26 +3,26 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CGROUPS=y
 CONFIG_EMBEDDED=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 CONFIG_PROFILING=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_MXC=y
-CONFIG_AEABI=y
-CONFIG_PM_DEBUG=y
 CONFIG_OPROFILE=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_MXC=y
 CONFIG_MACH_IMX27_DT=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_PM_DEBUG=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -30,8 +30,10 @@ CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
 CONFIG_CAN=m
 CONFIG_CAN_VCAN=m
 CONFIG_CAN_MCP251X=m
@@ -66,11 +68,6 @@ CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_AT25=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_CHR_DEV_SCH=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_CIRRUS is not set
@@ -101,7 +98,6 @@ CONFIG_KEYBOARD_IMX=m
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_JOYSTICK=y
 CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_TSC2102=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
@@ -127,20 +123,16 @@ CONFIG_USB_VIDEO_CLASS=m
 CONFIG_USB_PWC=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_SOC_CAMERA=m
-CONFIG_VIDEO_MX2=m
-CONFIG_V4L_MEM2MEM_DRIVERS=y
-CONFIG_VIDEO_CODA=m
-CONFIG_VIDEO_MX2_EMMAPRP=m
 # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
-CONFIG_SOC_CAMERA_MT9M111=m
-# CONFIG_DVB_AU8522_V4L is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-# CONFIG_DVB_TUNER_DIB0090 is not set
 CONFIG_FB=y
-CONFIG_FB_IMX=y
-CONFIG_LCD_L4F00242T03=y
+# CONFIG_FB_MX3 is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_SOUND=m
 CONFIG_SND=m
 CONFIG_SND_MIXER_OSS=m
@@ -158,16 +150,12 @@ CONFIG_USB_ACM=y
 CONFIG_USB_PRINTER=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_CHIPIDEA=y
-CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_CHIPIDEA_DEBUG=y
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_FTDI_SIO=y
 CONFIG_USB_SERIAL_PL2303=y
-CONFIG_NOP_USB_XCEIV=y
 CONFIG_USB_ULPI=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_FSL_USB2=y
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_MASS_STORAGE=m
@@ -195,6 +183,7 @@ CONFIG_IMX_SDMA=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_IIO=y
 CONFIG_MAX1027=y
+CONFIG_MAX5821=y
 CONFIG_PWM=y
 CONFIG_PWM_IMX=y
 CONFIG_EXT2_FS=y
@@ -215,8 +204,6 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=m
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_FS=y
@@ -225,3 +212,5 @@ CONFIG_DEBUG_FS=y
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
@@ -1 +0,0 @@
-../linux/linux.hash
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  879ca159c34ea9d3a6775f292cc59c2d3931d57dca00f0bebe2675ea0c82c6a9  linux-5.10.215.tar.xz
@@ -1,2 +0,0 @@
-# Locally computed
-sha256  839bf23cfe8ce613a77e583a60375179d0ad324e92c82fbdd07bebf0fd142268  u-boot-2018.09.tar.bz2
@@ -1,4 +1,4 @@
 label stm32mp157c-dk2-buildroot
  kernel /boot/zImage
  devicetree /boot/stm32mp157a-dhcor-avenger96.dtb
-  append root=/dev/mmcblk0p4 rootwait
+  append root=/dev/mmcblk1p4 rootwait
@@ -0,0 +1,51 @@
+From 336dc301e02d64507447f82020ce7a349797bef3 Mon Sep 17 00:00:00 2001
+From: Peter Korsgaard <peter@korsgaard.com>
+Date: Sun, 5 Nov 2023 14:59:16 +0100
+Subject: [PATCH] stm32mp157a-avenger96.dts: enable hash device to unbreak boot
+ issue
+
+The avenger96 board was forgotten when authentication support was added with
+commit 4bdb1a7a6a1325343 (stm32mp1: add authentication support for
+stm32image), causing a panic when stm32mp_init_auth() is called, so fix it
+similar to how it was done for the STM32MP157C-ED1 board with:
+
+commit b37b52ef8bc05bfd8dcca992d4ba84cd7c5d23bb
+Author: Yann Gautier <yann.gautier@st.com>
+Date:   Tue Oct 13 18:05:06 2020 +0200
+
+    fdts: add missing hash node in STM32MP157C-ED1 board DT
+
+    Without this node, the board fails to boot and panics in the function
+    stm32mp_init_auth().
+
+    Change-Id: Ia54924410dac2a8c94dd6e45d7e93977fe7d87e2
+    Signed-off-by: Yann Gautier <yann.gautier@st.com>
+
+Upstream: N/A - Upstream reworked authentication to skip it for MP157A
+ variant since v2.7, see "feat(st): disable authentication based on
+ part_number"
+ (https://github.com/ARM-software/arm-trusted-firmware/commit/49abdfd8cececb91a4bc7e7b29a30c09dce461c7)
+
+Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
+---
+ fdts/stm32mp157a-avenger96.dts | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/fdts/stm32mp157a-avenger96.dts b/fdts/stm32mp157a-avenger96.dts
+index b967736e4..76edecb83 100644
+--- a/fdts/stm32mp157a-avenger96.dts
+++ b/fdts/stm32mp157a-avenger96.dts
+@@ -271,6 +271,10 @@
+ 	};
+ };
+ 
+&hash1 {
+	status = "okay";
+};
+
+ &rng1 {
+ 	status = "okay";
+ };
+-- 
+2.39.2
+
@@ -1,4 +1,4 @@
 label Tinker linux
-  kernel /boot/zImage
+  kernel /boot/uImage
  devicetree /boot/rk3288-tinker-s.dtb
  append console=ttyS2,115200n8 root=179:1 rootwait
@@ -1,4 +1,4 @@
 label Tinker linux
-  kernel /boot/zImage
+  kernel /boot/uImage
  devicetree /boot/rk3288-tinker.dtb
  append console=ttyS2,115200n8 root=/dev/mmcblk0p1 rootwait
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  5ea2a8fed1ba0024229c6f6d77176679e1b24791bdbce8e285634013d4a93551  at91bootstrap3-v3.10.3-git4.tar.gz
@@ -1 +0,0 @@
-../linux/linux.hash
@@ -1,435 +0,0 @@
-From 762d2dcd9e233e3025f8627ea65f23e568045edb Mon Sep 17 00:00:00 2001
-From: Nick Desaulniers <ndesaulniers@google.com>
-Date: Mon, 4 Nov 2019 19:31:45 +0100
-Subject: [PATCH] ARM: 8933/1: replace Sun/Solaris style flag on section
- directive
-
-[ Upstream commit 790756c7e0229dedc83bf058ac69633045b1000e ]
-
-It looks like a section directive was using "Solaris style" to declare
-the section flags. Replace this with the GNU style so that Clang's
-integrated assembler can assemble this directive.
-
-The modified instances were identified via:
-$ ag \.section | grep #
-
-Link: https://ftp.gnu.org/old-gnu/Manuals/gas-2.9.1/html_chapter/as_7.html#SEC119
-Link: https://github.com/ClangBuiltLinux/linux/issues/744
-Link: https://bugs.llvm.org/show_bug.cgi?id=43759
-Link: https://reviews.llvm.org/D69296
-
-Acked-by: Nicolas Pitre <nico@fluxnic.net>
-Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
-Reviewed-by: Stefan Agner <stefan@agner.ch>
-Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
-Suggested-by: Fangrui Song <maskray@google.com>
-Suggested-by: Jian Cai <jiancai@google.com>
-Suggested-by: Peter Smith <peter.smith@linaro.org>
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Sasha Levin <sashal@kernel.org>
-Upstream: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=762d2dcd9e233e3025f8627ea65f23e568045edb
---
- arch/arm/boot/bootp/init.S            | 2 +-
- arch/arm/boot/compressed/big-endian.S | 2 +-
- arch/arm/boot/compressed/head.S       | 2 +-
- arch/arm/boot/compressed/piggy.S      | 2 +-
- arch/arm/mm/proc-arm1020.S            | 2 +-
- arch/arm/mm/proc-arm1020e.S           | 2 +-
- arch/arm/mm/proc-arm1022.S            | 2 +-
- arch/arm/mm/proc-arm1026.S            | 2 +-
- arch/arm/mm/proc-arm720.S             | 2 +-
- arch/arm/mm/proc-arm740.S             | 2 +-
- arch/arm/mm/proc-arm7tdmi.S           | 2 +-
- arch/arm/mm/proc-arm920.S             | 2 +-
- arch/arm/mm/proc-arm922.S             | 2 +-
- arch/arm/mm/proc-arm925.S             | 2 +-
- arch/arm/mm/proc-arm926.S             | 2 +-
- arch/arm/mm/proc-arm940.S             | 2 +-
- arch/arm/mm/proc-arm946.S             | 2 +-
- arch/arm/mm/proc-arm9tdmi.S           | 2 +-
- arch/arm/mm/proc-fa526.S              | 2 +-
- arch/arm/mm/proc-feroceon.S           | 2 +-
- arch/arm/mm/proc-mohawk.S             | 2 +-
- arch/arm/mm/proc-sa110.S              | 2 +-
- arch/arm/mm/proc-sa1100.S             | 2 +-
- arch/arm/mm/proc-v6.S                 | 2 +-
- arch/arm/mm/proc-v7.S                 | 2 +-
- arch/arm/mm/proc-v7m.S                | 4 ++--
- arch/arm/mm/proc-xsc3.S               | 2 +-
- arch/arm/mm/proc-xscale.S             | 2 +-
- 28 files changed, 29 insertions(+), 29 deletions(-)
-
-diff --git a/arch/arm/boot/bootp/init.S b/arch/arm/boot/bootp/init.S
-index 78b508075161..868eeeaaa46e 100644
--- a/arch/arm/boot/bootp/init.S
-+++ b/arch/arm/boot/bootp/init.S
-@@ -16,7 +16,7 @@
-  *  size immediately following the kernel, we could build this into
-  *  a binary blob, and concatenate the zImage using the cat command.
-  */
-		.section .start,#alloc,#execinstr
-+		.section .start, "ax"
- 		.type	_start, #function
- 		.globl	_start
- 
-diff --git a/arch/arm/boot/compressed/big-endian.S b/arch/arm/boot/compressed/big-endian.S
-index 88e2a88d324b..0e092c36da2f 100644
--- a/arch/arm/boot/compressed/big-endian.S
-+++ b/arch/arm/boot/compressed/big-endian.S
-@@ -6,7 +6,7 @@
-  *  Author: Nicolas Pitre
-  */
- 
-	.section ".start", #alloc, #execinstr
-+	.section ".start", "ax"
- 
- 	mrc	p15, 0, r0, c1, c0, 0	@ read control reg
- 	orr	r0, r0, #(1 << 7)	@ enable big endian mode
-diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
-index 69e661f574a0..e4d1b3d0b7d9 100644
--- a/arch/arm/boot/compressed/head.S
-+++ b/arch/arm/boot/compressed/head.S
-@@ -114,7 +114,7 @@
- #endif
- 		.endm
- 
-		.section ".start", #alloc, #execinstr
-+		.section ".start", "ax"
- /*
-  * sort out different calling conventions
-  */
-diff --git a/arch/arm/boot/compressed/piggy.S b/arch/arm/boot/compressed/piggy.S
-index 0284f84dcf38..27577644ee72 100644
--- a/arch/arm/boot/compressed/piggy.S
-+++ b/arch/arm/boot/compressed/piggy.S
-@@ -1,5 +1,5 @@
- /* SPDX-License-Identifier: GPL-2.0 */
-	.section .piggydata,#alloc
-+	.section .piggydata, "a"
- 	.globl	input_data
- input_data:
- 	.incbin	"arch/arm/boot/compressed/piggy_data"
-diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
-index 774ef1323554..4773490177c9 100644
--- a/arch/arm/mm/proc-arm1020.S
-+++ b/arch/arm/mm/proc-arm1020.S
-@@ -505,7 +505,7 @@ cpu_arm1020_name:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- 	.type	__arm1020_proc_info,#object
- __arm1020_proc_info:
-diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
-index ae3c27b71594..928e8ca58f40 100644
--- a/arch/arm/mm/proc-arm1020e.S
-+++ b/arch/arm/mm/proc-arm1020e.S
-@@ -463,7 +463,7 @@ arm1020e_crval:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- 	.type	__arm1020e_proc_info,#object
- __arm1020e_proc_info:
-diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
-index dbb2413fe04d..385584c3d222 100644
--- a/arch/arm/mm/proc-arm1022.S
-+++ b/arch/arm/mm/proc-arm1022.S
-@@ -448,7 +448,7 @@ arm1022_crval:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- 	.type	__arm1022_proc_info,#object
- __arm1022_proc_info:
-diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
-index 0b37b2cef9d3..29cc81857373 100644
--- a/arch/arm/mm/proc-arm1026.S
-+++ b/arch/arm/mm/proc-arm1026.S
-@@ -442,7 +442,7 @@ arm1026_crval:
- 	string	cpu_arm1026_name, "ARM1026EJ-S"
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- 	.type	__arm1026_proc_info,#object
- __arm1026_proc_info:
-diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
-index 3651cd70e418..c08cd1b0a1d0 100644
--- a/arch/arm/mm/proc-arm720.S
-+++ b/arch/arm/mm/proc-arm720.S
-@@ -186,7 +186,7 @@ arm720_crval:
-  * See <asm/procinfo.h> for a definition of this structure.
-  */
- 	
-		.section ".proc.info.init", #alloc
-+		.section ".proc.info.init", "a"
- 
- .macro arm720_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cpu_flush:req
- 		.type	__\name\()_proc_info,#object
-diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S
-index 024fb7732407..6eed87103b95 100644
--- a/arch/arm/mm/proc-arm740.S
-+++ b/arch/arm/mm/proc-arm740.S
-@@ -132,7 +132,7 @@ __arm740_setup:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 	.type	__arm740_proc_info,#object
- __arm740_proc_info:
- 	.long	0x41807400
-diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S
-index 25472d94426d..beb64a7ccb38 100644
--- a/arch/arm/mm/proc-arm7tdmi.S
-+++ b/arch/arm/mm/proc-arm7tdmi.S
-@@ -76,7 +76,7 @@ __arm7tdmi_setup:
- 
- 		.align
- 
-		.section ".proc.info.init", #alloc
-+		.section ".proc.info.init", "a"
- 
- .macro arm7tdmi_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, \
- 	extra_hwcaps=0
-diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
-index 7a14bd4414c9..5d4319708362 100644
--- a/arch/arm/mm/proc-arm920.S
-+++ b/arch/arm/mm/proc-arm920.S
-@@ -448,7 +448,7 @@ arm920_crval:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- 	.type	__arm920_proc_info,#object
- __arm920_proc_info:
-diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
-index edccfcdcd551..7e22ca780b36 100644
--- a/arch/arm/mm/proc-arm922.S
-+++ b/arch/arm/mm/proc-arm922.S
-@@ -426,7 +426,7 @@ arm922_crval:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- 	.type	__arm922_proc_info,#object
- __arm922_proc_info:
-diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
-index 32a47cc19076..d343e77b8456 100644
--- a/arch/arm/mm/proc-arm925.S
-+++ b/arch/arm/mm/proc-arm925.S
-@@ -491,7 +491,7 @@ arm925_crval:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- .macro arm925_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache
- 	.type	__\name\()_proc_info,#object
-diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
-index fb827c633693..8cf78c608c42 100644
--- a/arch/arm/mm/proc-arm926.S
-+++ b/arch/arm/mm/proc-arm926.S
-@@ -474,7 +474,7 @@ arm926_crval:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- 	.type	__arm926_proc_info,#object
- __arm926_proc_info:
-diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
-index ee5b66f847c4..631ae64eeccd 100644
--- a/arch/arm/mm/proc-arm940.S
-+++ b/arch/arm/mm/proc-arm940.S
-@@ -344,7 +344,7 @@ __arm940_setup:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- 	.type	__arm940_proc_info,#object
- __arm940_proc_info:
-diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
-index 7361837edc31..033ad7402d67 100644
--- a/arch/arm/mm/proc-arm946.S
-+++ b/arch/arm/mm/proc-arm946.S
-@@ -399,7 +399,7 @@ __arm946_setup:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 	.type	__arm946_proc_info,#object
- __arm946_proc_info:
- 	.long	0x41009460
-diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S
-index 7fac8c612134..2195468ccd76 100644
--- a/arch/arm/mm/proc-arm9tdmi.S
-+++ b/arch/arm/mm/proc-arm9tdmi.S
-@@ -70,7 +70,7 @@ __arm9tdmi_setup:
- 
- 		.align
- 
-		.section ".proc.info.init", #alloc
-+		.section ".proc.info.init", "a"
- 
- .macro arm9tdmi_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req
- 		.type	__\name\()_proc_info, #object
-diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S
-index 4001b73af4ee..fd3e5dd94e59 100644
--- a/arch/arm/mm/proc-fa526.S
-+++ b/arch/arm/mm/proc-fa526.S
-@@ -190,7 +190,7 @@ fa526_cr1_set:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- 	.type	__fa526_proc_info,#object
- __fa526_proc_info:
-diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
-index 92e08bf37aad..685d324a74d3 100644
--- a/arch/arm/mm/proc-feroceon.S
-+++ b/arch/arm/mm/proc-feroceon.S
-@@ -584,7 +584,7 @@ feroceon_crval:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- .macro feroceon_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache:req
- 	.type	__\name\()_proc_info,#object
-diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
-index 6f07d2ef4ff2..9182321a586a 100644
--- a/arch/arm/mm/proc-mohawk.S
-+++ b/arch/arm/mm/proc-mohawk.S
-@@ -429,7 +429,7 @@ mohawk_crval:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- 	.type	__88sv331x_proc_info,#object
- __88sv331x_proc_info:
-diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
-index ee2ce496239f..093ad2ceff28 100644
--- a/arch/arm/mm/proc-sa110.S
-+++ b/arch/arm/mm/proc-sa110.S
-@@ -199,7 +199,7 @@ sa110_crval:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- 	.type	__sa110_proc_info,#object
- __sa110_proc_info:
-diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
-index 222d5836f666..12b8fcab4b59 100644
--- a/arch/arm/mm/proc-sa1100.S
-+++ b/arch/arm/mm/proc-sa1100.S
-@@ -242,7 +242,7 @@ sa1100_crval:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- .macro sa1100_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req
- 	.type	__\name\()_proc_info,#object
-diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
-index 06d890a2342b..32f4df0915ef 100644
--- a/arch/arm/mm/proc-v6.S
-+++ b/arch/arm/mm/proc-v6.S
-@@ -264,7 +264,7 @@ v6_crval:
- 	string	cpu_elf_name, "v6"
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- 	/*
- 	 * Match any ARMv6 processor core.
-diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
-index 339eb17c9808..e351d682c2e3 100644
--- a/arch/arm/mm/proc-v7.S
-+++ b/arch/arm/mm/proc-v7.S
-@@ -637,7 +637,7 @@ __v7_setup_stack:
- 	string	cpu_elf_name, "v7"
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- 	/*
- 	 * Standard v7 proc info content
-diff --git a/arch/arm/mm/proc-v7m.S b/arch/arm/mm/proc-v7m.S
-index 9c2978c128d9..0be14b64879c 100644
--- a/arch/arm/mm/proc-v7m.S
-+++ b/arch/arm/mm/proc-v7m.S
-@@ -96,7 +96,7 @@ ENTRY(cpu_cm7_proc_fin)
- 	ret	lr
- ENDPROC(cpu_cm7_proc_fin)
- 
-	.section ".init.text", #alloc, #execinstr
-+	.section ".init.text", "ax"
- 
- __v7m_cm7_setup:
- 	mov	r8, #(V7M_SCB_CCR_DC | V7M_SCB_CCR_IC| V7M_SCB_CCR_BP)
-@@ -180,7 +180,7 @@ ENDPROC(__v7m_setup)
- 	string cpu_elf_name "v7m"
- 	string cpu_v7m_name "ARMv7-M"
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- .macro __v7m_proc name, initfunc, cache_fns = nop_cache_fns, hwcaps = 0,  proc_fns = v7m_processor_functions
- 	.long	0			/* proc_info_list.__cpu_mm_mmu_flags */
-diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
-index 293dcc2c441f..da96e4de1353 100644
--- a/arch/arm/mm/proc-xsc3.S
-+++ b/arch/arm/mm/proc-xsc3.S
-@@ -499,7 +499,7 @@ xsc3_crval:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- .macro xsc3_proc_info name:req, cpu_val:req, cpu_mask:req
- 	.type	__\name\()_proc_info,#object
-diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
-index 3d75b7972fd1..c7800c69921b 100644
--- a/arch/arm/mm/proc-xscale.S
-+++ b/arch/arm/mm/proc-xscale.S
-@@ -613,7 +613,7 @@ xscale_crval:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- .macro xscale_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache
- 	.type	__\name\()_proc_info,#object
-- 
-2.43.0
-
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  6cc67b3d2d550c3f0b201d7850bdb25503bc6a51e41b98d2c0fbd531b56f3a20  linux-linux4sam_6.1.tar.gz
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  c7c08f44487c97ade41966ed6cd639258d124e781580ea0a82d96b6b5ca230a5  uboot-linux4sam_6.1-git4.tar.gz
@@ -1,29 +0,0 @@
-# SD card image for RZBoard V2L
-
-image boot.vfat {
-	vfat {
-		files = {
-			"Image",
-			"rzboard.dtb",
-			"uEnv.txt"
-		}
-	}
-	size = 24M
-}
-
-image sdcard.img {
-	hdimage {
-		partition-table-type = "hybrid"
-	}
-
-	partition boot {
-		partition-type = "0xC"
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext2"
-	}
-}
@@ -1,5 +0,0 @@
-#!/usr/bin/env bash
-set -e
-
-cp board/avnet/rzboard_v2l/uEnv.txt "${BINARIES_DIR}"
-support/scripts/genimage.sh -c board/avnet/rzboard_v2l/genimage.cfg
@@ -1,71 +0,0 @@
-RZBoard V2L
-===========
-
-https://www.avnet.com/wps/portal/us/products/avnet-boards/avnet-board-families/rzboard-v2l/
-
-This board support creates a bootable sd card image for the AVNET RZBoard V2L.
-This board is shipped with a u-boot inside its eMMC. This board support uses
-that u-boot and only puts uEnv.txt, kernel image and rootfs onto the sd card.
-
-Build:
-======
-
-  $ make rzboard_v2l_defconfig
-  $ make
-
-Files created in output directory
-=================================
-
-output/images
-.
-├── Image
-├── boot.vfat
-├── rootfs.ext2
-├── rootfs.ext4
-├── rootfs.tar
-├── rzboard.dtb
-├── sdcard.img
-└── uEnv.txt
-
-Creating bootable SD card:
-==========================
-
-Simply invoke (as root)
-
-sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
-
-Where X is your SD card device.
-
-Booting:
-========
-
-Configure board for sd card boot:
---------------------------------
-Set the 'BOOT1' switch (next to the audio jack) to '1' (away from 'ON') in
-order to let the board boot kernel and rootfs from SD card.
-
-Serial console:
---------------
-The RZBoard V2L has a 4-pin header "J19" right next to the micro USB. Its
-layout can be seen in the Quick-Start Guide, or the Hardware User Guide,
-obtainable from:
-https://www.avnet.com/wps/portal/us/products/avnet-boards/avnet-board-families/rzboard-v2l/
-
-The uart pins are as follows (from left to right - orientation according to the
-board's labeling):
-
-pin 1: n/a  (most away from the board's corner)
-pin 2: tx
-pin 3: rx
-pin 4: gnd  (nearest to the board's corner)
-
-Baudrate for this board is 115200.
-
-Power-Up:
---------
-Plug in a suitable USB-C power supply and press the button 'S1' (next to the
-USB-C port) for 2 seconds until the LED goes on.
-
-Login:
------
-Enter 'root' as login user, and the prompt is ready.
@@ -1,3 +0,0 @@
-bootcmd=booti ${kernel_addr_r} - ${fdt_addr_r}
-uenvcmd=fatload mmc 0:1 ${kernel_addr_r} Image; fatload mmc 0:1 ${fdt_addr_r} rzboard.dtb
-bootargs=root=/dev/mmcblk0p2 rw rootfstype=ext4 earlyprintk console=ttyS0,115200 rootwait earlycon clk_ignore_unused debug
@@ -1,4 +1,4 @@
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p2 rootwait
+setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait

 mmc dev 0
 fatload mmc 0 $kernel_addr_r zImage
@@ -1 +0,0 @@
-../linux/linux.hash
@@ -1,432 +0,0 @@
-From 790756c7e0229dedc83bf058ac69633045b1000e Mon Sep 17 00:00:00 2001
-From: Nick Desaulniers <ndesaulniers@google.com>
-Date: Mon, 4 Nov 2019 19:31:45 +0100
-Subject: [PATCH] ARM: 8933/1: replace Sun/Solaris style flag on section
- directive
-
-It looks like a section directive was using "Solaris style" to declare
-the section flags. Replace this with the GNU style so that Clang's
-integrated assembler can assemble this directive.
-
-The modified instances were identified via:
-$ ag \.section | grep #
-
-Link: https://ftp.gnu.org/old-gnu/Manuals/gas-2.9.1/html_chapter/as_7.html#SEC119
-Link: https://github.com/ClangBuiltLinux/linux/issues/744
-Link: https://bugs.llvm.org/show_bug.cgi?id=43759
-Link: https://reviews.llvm.org/D69296
-
-Acked-by: Nicolas Pitre <nico@fluxnic.net>
-Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
-Reviewed-by: Stefan Agner <stefan@agner.ch>
-Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
-Suggested-by: Fangrui Song <maskray@google.com>
-Suggested-by: Jian Cai <jiancai@google.com>
-Suggested-by: Peter Smith <peter.smith@linaro.org>
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-Upstream: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=762d2dcd9e233e3025f8627ea65f23e568045edb
---
- arch/arm/boot/bootp/init.S            | 2 +-
- arch/arm/boot/compressed/big-endian.S | 2 +-
- arch/arm/boot/compressed/head.S       | 2 +-
- arch/arm/boot/compressed/piggy.S      | 2 +-
- arch/arm/mm/proc-arm1020.S            | 2 +-
- arch/arm/mm/proc-arm1020e.S           | 2 +-
- arch/arm/mm/proc-arm1022.S            | 2 +-
- arch/arm/mm/proc-arm1026.S            | 2 +-
- arch/arm/mm/proc-arm720.S             | 2 +-
- arch/arm/mm/proc-arm740.S             | 2 +-
- arch/arm/mm/proc-arm7tdmi.S           | 2 +-
- arch/arm/mm/proc-arm920.S             | 2 +-
- arch/arm/mm/proc-arm922.S             | 2 +-
- arch/arm/mm/proc-arm925.S             | 2 +-
- arch/arm/mm/proc-arm926.S             | 2 +-
- arch/arm/mm/proc-arm940.S             | 2 +-
- arch/arm/mm/proc-arm946.S             | 2 +-
- arch/arm/mm/proc-arm9tdmi.S           | 2 +-
- arch/arm/mm/proc-fa526.S              | 2 +-
- arch/arm/mm/proc-feroceon.S           | 2 +-
- arch/arm/mm/proc-mohawk.S             | 2 +-
- arch/arm/mm/proc-sa110.S              | 2 +-
- arch/arm/mm/proc-sa1100.S             | 2 +-
- arch/arm/mm/proc-v6.S                 | 2 +-
- arch/arm/mm/proc-v7.S                 | 2 +-
- arch/arm/mm/proc-v7m.S                | 4 ++--
- arch/arm/mm/proc-xsc3.S               | 2 +-
- arch/arm/mm/proc-xscale.S             | 2 +-
- 28 files changed, 29 insertions(+), 29 deletions(-)
-
-diff --git a/arch/arm/boot/bootp/init.S b/arch/arm/boot/bootp/init.S
-index 5c476bd2b4ce..b562da2f7040 100644
--- a/arch/arm/boot/bootp/init.S
-+++ b/arch/arm/boot/bootp/init.S
-@@ -13,7 +13,7 @@
-  *  size immediately following the kernel, we could build this into
-  *  a binary blob, and concatenate the zImage using the cat command.
-  */
-		.section .start,#alloc,#execinstr
-+		.section .start, "ax"
- 		.type	_start, #function
- 		.globl	_start
- 
-diff --git a/arch/arm/boot/compressed/big-endian.S b/arch/arm/boot/compressed/big-endian.S
-index 88e2a88d324b..0e092c36da2f 100644
--- a/arch/arm/boot/compressed/big-endian.S
-+++ b/arch/arm/boot/compressed/big-endian.S
-@@ -6,7 +6,7 @@
-  *  Author: Nicolas Pitre
-  */
- 
-	.section ".start", #alloc, #execinstr
-+	.section ".start", "ax"
- 
- 	mrc	p15, 0, r0, c1, c0, 0	@ read control reg
- 	orr	r0, r0, #(1 << 7)	@ enable big endian mode
-diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
-index ae70754d003d..ead21e5f2b80 100644
--- a/arch/arm/boot/compressed/head.S
-+++ b/arch/arm/boot/compressed/head.S
-@@ -140,7 +140,7 @@
- #endif
- 		.endm
- 
-		.section ".start", #alloc, #execinstr
-+		.section ".start", "ax"
- /*
-  * sort out different calling conventions
-  */
-diff --git a/arch/arm/boot/compressed/piggy.S b/arch/arm/boot/compressed/piggy.S
-index 0284f84dcf38..27577644ee72 100644
--- a/arch/arm/boot/compressed/piggy.S
-+++ b/arch/arm/boot/compressed/piggy.S
-@@ -1,5 +1,5 @@
- /* SPDX-License-Identifier: GPL-2.0 */
-	.section .piggydata,#alloc
-+	.section .piggydata, "a"
- 	.globl	input_data
- input_data:
- 	.incbin	"arch/arm/boot/compressed/piggy_data"
-diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
-index 4fa5371bc662..2785da387c91 100644
--- a/arch/arm/mm/proc-arm1020.S
-+++ b/arch/arm/mm/proc-arm1020.S
-@@ -491,7 +491,7 @@ cpu_arm1020_name:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- 	.type	__arm1020_proc_info,#object
- __arm1020_proc_info:
-diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
-index 5d8a8339e09a..e9ea237ed785 100644
--- a/arch/arm/mm/proc-arm1020e.S
-+++ b/arch/arm/mm/proc-arm1020e.S
-@@ -449,7 +449,7 @@ arm1020e_crval:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- 	.type	__arm1020e_proc_info,#object
- __arm1020e_proc_info:
-diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
-index b3dd95c345e4..920c279e7879 100644
--- a/arch/arm/mm/proc-arm1022.S
-+++ b/arch/arm/mm/proc-arm1022.S
-@@ -443,7 +443,7 @@ arm1022_crval:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- 	.type	__arm1022_proc_info,#object
- __arm1022_proc_info:
-diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
-index e927187157d7..0bdf25a95b10 100644
--- a/arch/arm/mm/proc-arm1026.S
-+++ b/arch/arm/mm/proc-arm1026.S
-@@ -437,7 +437,7 @@ arm1026_crval:
- 	string	cpu_arm1026_name, "ARM1026EJ-S"
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- 	.type	__arm1026_proc_info,#object
- __arm1026_proc_info:
-diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
-index c99d24363f32..39361e196d61 100644
--- a/arch/arm/mm/proc-arm720.S
-+++ b/arch/arm/mm/proc-arm720.S
-@@ -172,7 +172,7 @@ arm720_crval:
-  * See <asm/procinfo.h> for a definition of this structure.
-  */
- 	
-		.section ".proc.info.init", #alloc
-+		.section ".proc.info.init", "a"
- 
- .macro arm720_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cpu_flush:req
- 		.type	__\name\()_proc_info,#object
-diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S
-index 1b4a3838393f..1a94bbf6e53f 100644
--- a/arch/arm/mm/proc-arm740.S
-+++ b/arch/arm/mm/proc-arm740.S
-@@ -128,7 +128,7 @@ __arm740_setup:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 	.type	__arm740_proc_info,#object
- __arm740_proc_info:
- 	.long	0x41807400
-diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S
-index 17a4687065c7..52b66cf0259e 100644
--- a/arch/arm/mm/proc-arm7tdmi.S
-+++ b/arch/arm/mm/proc-arm7tdmi.S
-@@ -72,7 +72,7 @@ __arm7tdmi_setup:
- 
- 		.align
- 
-		.section ".proc.info.init", #alloc
-+		.section ".proc.info.init", "a"
- 
- .macro arm7tdmi_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, \
- 	extra_hwcaps=0
-diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
-index 298c76b47749..31ac8acc34dc 100644
--- a/arch/arm/mm/proc-arm920.S
-+++ b/arch/arm/mm/proc-arm920.S
-@@ -434,7 +434,7 @@ arm920_crval:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- 	.type	__arm920_proc_info,#object
- __arm920_proc_info:
-diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
-index 824be3a0bc23..ca2c7ca8af21 100644
--- a/arch/arm/mm/proc-arm922.S
-+++ b/arch/arm/mm/proc-arm922.S
-@@ -412,7 +412,7 @@ arm922_crval:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- 	.type	__arm922_proc_info,#object
- __arm922_proc_info:
-diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
-index d40cff8f102c..a381a0c9f109 100644
--- a/arch/arm/mm/proc-arm925.S
-+++ b/arch/arm/mm/proc-arm925.S
-@@ -477,7 +477,7 @@ arm925_crval:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- .macro arm925_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache
- 	.type	__\name\()_proc_info,#object
-diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
-index 4ef89e1d1127..1ba253c2bce1 100644
--- a/arch/arm/mm/proc-arm926.S
-+++ b/arch/arm/mm/proc-arm926.S
-@@ -460,7 +460,7 @@ arm926_crval:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- 	.type	__arm926_proc_info,#object
- __arm926_proc_info:
-diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
-index 1c26d991386d..4b8a00220cc9 100644
--- a/arch/arm/mm/proc-arm940.S
-+++ b/arch/arm/mm/proc-arm940.S
-@@ -340,7 +340,7 @@ __arm940_setup:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- 	.type	__arm940_proc_info,#object
- __arm940_proc_info:
-diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
-index 2dc1c75a4fd4..555becf9c758 100644
--- a/arch/arm/mm/proc-arm946.S
-+++ b/arch/arm/mm/proc-arm946.S
-@@ -395,7 +395,7 @@ __arm946_setup:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 	.type	__arm946_proc_info,#object
- __arm946_proc_info:
- 	.long	0x41009460
-diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S
-index 913c06e590af..ef517530130b 100644
--- a/arch/arm/mm/proc-arm9tdmi.S
-+++ b/arch/arm/mm/proc-arm9tdmi.S
-@@ -66,7 +66,7 @@ __arm9tdmi_setup:
- 
- 		.align
- 
-		.section ".proc.info.init", #alloc
-+		.section ".proc.info.init", "a"
- 
- .macro arm9tdmi_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req
- 		.type	__\name\()_proc_info, #object
-diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S
-index 8120b6f4dbb8..dddf833fe000 100644
--- a/arch/arm/mm/proc-fa526.S
-+++ b/arch/arm/mm/proc-fa526.S
-@@ -185,7 +185,7 @@ fa526_cr1_set:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- 	.type	__fa526_proc_info,#object
- __fa526_proc_info:
-diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
-index bb6dc34d42a3..b12b76bc8d30 100644
--- a/arch/arm/mm/proc-feroceon.S
-+++ b/arch/arm/mm/proc-feroceon.S
-@@ -571,7 +571,7 @@ feroceon_crval:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- .macro feroceon_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache:req
- 	.type	__\name\()_proc_info,#object
-diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
-index f08308578885..d47d6c5cee63 100644
--- a/arch/arm/mm/proc-mohawk.S
-+++ b/arch/arm/mm/proc-mohawk.S
-@@ -416,7 +416,7 @@ mohawk_crval:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- 	.type	__88sv331x_proc_info,#object
- __88sv331x_proc_info:
-diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
-index d5bc5d702563..baba503ba816 100644
--- a/arch/arm/mm/proc-sa110.S
-+++ b/arch/arm/mm/proc-sa110.S
-@@ -196,7 +196,7 @@ sa110_crval:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- 	.type	__sa110_proc_info,#object
- __sa110_proc_info:
-diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
-index be7b611c76c7..75ebacc8e4e5 100644
--- a/arch/arm/mm/proc-sa1100.S
-+++ b/arch/arm/mm/proc-sa1100.S
-@@ -239,7 +239,7 @@ sa1100_crval:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- .macro sa1100_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req
- 	.type	__\name\()_proc_info,#object
-diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
-index c1c85eb3484f..1dd0d5ca27da 100644
--- a/arch/arm/mm/proc-v6.S
-+++ b/arch/arm/mm/proc-v6.S
-@@ -261,7 +261,7 @@ v6_crval:
- 	string	cpu_elf_name, "v6"
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- 	/*
- 	 * Match any ARMv6 processor core.
-diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
-index c4e8006a1a8c..48e0ef6f0dcc 100644
--- a/arch/arm/mm/proc-v7.S
-+++ b/arch/arm/mm/proc-v7.S
-@@ -644,7 +644,7 @@ __v7_setup_stack:
- 	string	cpu_elf_name, "v7"
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- 	/*
- 	 * Standard v7 proc info content
-diff --git a/arch/arm/mm/proc-v7m.S b/arch/arm/mm/proc-v7m.S
-index 1a49d503eafc..84459c1d31b8 100644
--- a/arch/arm/mm/proc-v7m.S
-+++ b/arch/arm/mm/proc-v7m.S
-@@ -93,7 +93,7 @@ ENTRY(cpu_cm7_proc_fin)
- 	ret	lr
- ENDPROC(cpu_cm7_proc_fin)
- 
-	.section ".init.text", #alloc, #execinstr
-+	.section ".init.text", "ax"
- 
- __v7m_cm7_setup:
- 	mov	r8, #(V7M_SCB_CCR_DC | V7M_SCB_CCR_IC| V7M_SCB_CCR_BP)
-@@ -177,7 +177,7 @@ ENDPROC(__v7m_setup)
- 	string cpu_elf_name "v7m"
- 	string cpu_v7m_name "ARMv7-M"
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- .macro __v7m_proc name, initfunc, cache_fns = nop_cache_fns, hwcaps = 0,  proc_fns = v7m_processor_functions
- 	.long	0			/* proc_info_list.__cpu_mm_mmu_flags */
-diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
-index 1ac0fbbe9f12..42eaecc43cfe 100644
--- a/arch/arm/mm/proc-xsc3.S
-+++ b/arch/arm/mm/proc-xsc3.S
-@@ -496,7 +496,7 @@ xsc3_crval:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- .macro xsc3_proc_info name:req, cpu_val:req, cpu_mask:req
- 	.type	__\name\()_proc_info,#object
-diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
-index bdb2b7749b03..18ac5a1f8922 100644
--- a/arch/arm/mm/proc-xscale.S
-+++ b/arch/arm/mm/proc-xscale.S
-@@ -610,7 +610,7 @@ xscale_crval:
- 
- 	.align
- 
-	.section ".proc.info.init", #alloc
-+	.section ".proc.info.init", "a"
- 
- .macro xscale_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache
- 	.type	__\name\()_proc_info,#object
-- 
-2.43.0
-
@@ -1,80 +0,0 @@
-From 67a00c299c5c143817c948fbc7de1a2fa1af38fb Mon Sep 17 00:00:00 2001
-From: Kai-Heng Feng <kai.heng.feng@canonical.com>
-Date: Tue, 11 Oct 2022 10:46:17 +0800
-Subject: [PATCH] ata: ahci: Match EM_MAX_SLOTS with SATA_PMP_MAX_PORTS
-
-commit 1e41e693f458eef2d5728207dbd327cd3b16580a upstream.
-
-UBSAN complains about array-index-out-of-bounds:
-[ 1.980703] kernel: UBSAN: array-index-out-of-bounds in /build/linux-9H675w/linux-5.15.0/drivers/ata/libahci.c:968:41
-[ 1.980709] kernel: index 15 is out of range for type 'ahci_em_priv [8]'
-[ 1.980713] kernel: CPU: 0 PID: 209 Comm: scsi_eh_8 Not tainted 5.15.0-25-generic #25-Ubuntu
-[ 1.980716] kernel: Hardware name: System manufacturer System Product Name/P5Q3, BIOS 1102 06/11/2010
-[ 1.980718] kernel: Call Trace:
-[ 1.980721] kernel: <TASK>
-[ 1.980723] kernel: show_stack+0x52/0x58
-[ 1.980729] kernel: dump_stack_lvl+0x4a/0x5f
-[ 1.980734] kernel: dump_stack+0x10/0x12
-[ 1.980736] kernel: ubsan_epilogue+0x9/0x45
-[ 1.980739] kernel: __ubsan_handle_out_of_bounds.cold+0x44/0x49
-[ 1.980742] kernel: ahci_qc_issue+0x166/0x170 [libahci]
-[ 1.980748] kernel: ata_qc_issue+0x135/0x240
-[ 1.980752] kernel: ata_exec_internal_sg+0x2c4/0x580
-[ 1.980754] kernel: ? vprintk_default+0x1d/0x20
-[ 1.980759] kernel: ata_exec_internal+0x67/0xa0
-[ 1.980762] kernel: sata_pmp_read+0x8d/0xc0
-[ 1.980765] kernel: sata_pmp_read_gscr+0x3c/0x90
-[ 1.980768] kernel: sata_pmp_attach+0x8b/0x310
-[ 1.980771] kernel: ata_eh_revalidate_and_attach+0x28c/0x4b0
-[ 1.980775] kernel: ata_eh_recover+0x6b6/0xb30
-[ 1.980778] kernel: ? ahci_do_hardreset+0x180/0x180 [libahci]
-[ 1.980783] kernel: ? ahci_stop_engine+0xb0/0xb0 [libahci]
-[ 1.980787] kernel: ? ahci_do_softreset+0x290/0x290 [libahci]
-[ 1.980792] kernel: ? trace_event_raw_event_ata_eh_link_autopsy_qc+0xe0/0xe0
-[ 1.980795] kernel: sata_pmp_eh_recover.isra.0+0x214/0x560
-[ 1.980799] kernel: sata_pmp_error_handler+0x23/0x40
-[ 1.980802] kernel: ahci_error_handler+0x43/0x80 [libahci]
-[ 1.980806] kernel: ata_scsi_port_error_handler+0x2b1/0x600
-[ 1.980810] kernel: ata_scsi_error+0x9c/0xd0
-[ 1.980813] kernel: scsi_error_handler+0xa1/0x180
-[ 1.980817] kernel: ? scsi_unjam_host+0x1c0/0x1c0
-[ 1.980820] kernel: kthread+0x12a/0x150
-[ 1.980823] kernel: ? set_kthread_struct+0x50/0x50
-[ 1.980826] kernel: ret_from_fork+0x22/0x30
-[ 1.980831] kernel: </TASK>
-
-This happens because sata_pmp_init_links() initialize link->pmp up to
-SATA_PMP_MAX_PORTS while em_priv is declared as 8 elements array.
-
-I can't find the maximum Enclosure Management ports specified in AHCI
-spec v1.3.1, but "12.2.1 LED message type" states that "Port Multiplier
-Information" can utilize 4 bits, which implies it can support up to 16
-ports. Hence, use SATA_PMP_MAX_PORTS as EM_MAX_SLOTS to resolve the
-issue.
-
-BugLink: https://bugs.launchpad.net/bugs/1970074
-Cc: stable@vger.kernel.org
-Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
-Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Upstream: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=67a00c299c5c143817c948fbc7de1a2fa1af38fb
---
- drivers/ata/ahci.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
-index 9290e787abdc..d5b9f9689877 100644
--- a/drivers/ata/ahci.h
-+++ b/drivers/ata/ahci.h
-@@ -265,7 +265,7 @@ enum {
- 	PCS_7				= 0x94, /* 7+ port PCS (Denverton) */
- 
- 	/* em constants */
-	EM_MAX_SLOTS			= 8,
-+	EM_MAX_SLOTS			= SATA_PMP_MAX_PORTS,
- 	EM_MAX_RETRY			= 5,
- 
- 	/* em_ctl bits */
-- 
-2.43.0
-
@@ -1,357 +0,0 @@
-From ba6e23d2c9e3bcabda328467ba4eeca12f37e2ae Mon Sep 17 00:00:00 2001
-From: Arnd Bergmann <arnd@arndb.de>
-Date: Sat, 3 Dec 2022 11:54:25 +0100
-Subject: [PATCH] ata: ahci: fix enum constants for gcc-13
-
-commit f07788079f515ca4a681c5f595bdad19cfbd7b1d upstream.
-
-gcc-13 slightly changes the type of constant expressions that are defined
-in an enum, which triggers a compile time sanity check in libata:
-
-linux/drivers/ata/libahci.c: In function 'ahci_led_store':
-linux/include/linux/compiler_types.h:357:45: error: call to '__compiletime_assert_302' declared with attribute error: BUILD_BUG_ON failed: sizeof(_s) > sizeof(long)
-357 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
-
-The new behavior is that sizeof() returns the same value for the
-constant as it does for the enum type, which is generally more sensible
-and consistent.
-
-The problem in libata is that it contains a single enum definition for
-lots of unrelated constants, some of which are large positive (unsigned)
-integers like 0xffffffff, while others like (1<<31) are interpreted as
-negative integers, and this forces the enum type to become 64 bit wide
-even though most constants would still fit into a signed 32-bit 'int'.
-
-Fix this by changing the entire enum definition to use BIT(x) in place
-of (1<<x), which results in all values being seen as 'unsigned' and
-fitting into an unsigned 32-bit type.
-
-Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107917
-Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107405
-Reported-by: Luis Machado <luis.machado@arm.com>
-Cc: linux-ide@vger.kernel.org
-Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
-Cc: stable@vger.kernel.org
-Cc: Randy Dunlap <rdunlap@infradead.org>
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Tested-by: Luis Machado <luis.machado@arm.com>
-Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
-[Backport to linux-4.19.y]
-Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Upstream: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=4c3ddc06cedb62f2904e58fd95170bf206bee149
---
- drivers/ata/ahci.h | 232 +++++++++++++++++++++++----------------------
- 1 file changed, 117 insertions(+), 115 deletions(-)
-
-diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
-index d5b9f9689877..8cc6cb14767b 100644
--- a/drivers/ata/ahci.h
-+++ b/drivers/ata/ahci.h
-@@ -40,6 +40,7 @@
- #include <linux/libata.h>
- #include <linux/phy/phy.h>
- #include <linux/regulator/consumer.h>
-+#include <linux/bits.h>
- 
- /* Enclosure Management Control */
- #define EM_CTRL_MSG_TYPE              0x000f0000
-@@ -70,12 +71,12 @@ enum {
- 	AHCI_PORT_PRIV_FBS_DMA_SZ	= AHCI_CMD_SLOT_SZ +
- 					  AHCI_CMD_TBL_AR_SZ +
- 					  (AHCI_RX_FIS_SZ * 16),
-	AHCI_IRQ_ON_SG		= (1 << 31),
-	AHCI_CMD_ATAPI		= (1 << 5),
-	AHCI_CMD_WRITE		= (1 << 6),
-	AHCI_CMD_PREFETCH	= (1 << 7),
-	AHCI_CMD_RESET		= (1 << 8),
-	AHCI_CMD_CLR_BUSY	= (1 << 10),
-+	AHCI_IRQ_ON_SG		= BIT(31),
-+	AHCI_CMD_ATAPI		= BIT(5),
-+	AHCI_CMD_WRITE		= BIT(6),
-+	AHCI_CMD_PREFETCH	= BIT(7),
-+	AHCI_CMD_RESET		= BIT(8),
-+	AHCI_CMD_CLR_BUSY	= BIT(10),
- 
- 	RX_FIS_PIO_SETUP	= 0x20,	/* offset of PIO Setup FIS data */
- 	RX_FIS_D2H_REG		= 0x40,	/* offset of D2H Register FIS data */
-@@ -93,37 +94,37 @@ enum {
- 	HOST_CAP2		= 0x24, /* host capabilities, extended */
- 
- 	/* HOST_CTL bits */
-	HOST_RESET		= (1 << 0),  /* reset controller; self-clear */
-	HOST_IRQ_EN		= (1 << 1),  /* global IRQ enable */
-	HOST_MRSM		= (1 << 2),  /* MSI Revert to Single Message */
-	HOST_AHCI_EN		= (1 << 31), /* AHCI enabled */
-+	HOST_RESET		= BIT(0),  /* reset controller; self-clear */
-+	HOST_IRQ_EN		= BIT(1),  /* global IRQ enable */
-+	HOST_MRSM		= BIT(2),  /* MSI Revert to Single Message */
-+	HOST_AHCI_EN		= BIT(31), /* AHCI enabled */
- 
- 	/* HOST_CAP bits */
-	HOST_CAP_SXS		= (1 << 5),  /* Supports External SATA */
-	HOST_CAP_EMS		= (1 << 6),  /* Enclosure Management support */
-	HOST_CAP_CCC		= (1 << 7),  /* Command Completion Coalescing */
-	HOST_CAP_PART		= (1 << 13), /* Partial state capable */
-	HOST_CAP_SSC		= (1 << 14), /* Slumber state capable */
-	HOST_CAP_PIO_MULTI	= (1 << 15), /* PIO multiple DRQ support */
-	HOST_CAP_FBS		= (1 << 16), /* FIS-based switching support */
-	HOST_CAP_PMP		= (1 << 17), /* Port Multiplier support */
-	HOST_CAP_ONLY		= (1 << 18), /* Supports AHCI mode only */
-	HOST_CAP_CLO		= (1 << 24), /* Command List Override support */
-	HOST_CAP_LED		= (1 << 25), /* Supports activity LED */
-	HOST_CAP_ALPM		= (1 << 26), /* Aggressive Link PM support */
-	HOST_CAP_SSS		= (1 << 27), /* Staggered Spin-up */
-	HOST_CAP_MPS		= (1 << 28), /* Mechanical presence switch */
-	HOST_CAP_SNTF		= (1 << 29), /* SNotification register */
-	HOST_CAP_NCQ		= (1 << 30), /* Native Command Queueing */
-	HOST_CAP_64		= (1 << 31), /* PCI DAC (64-bit DMA) support */
-+	HOST_CAP_SXS		= BIT(5),  /* Supports External SATA */
-+	HOST_CAP_EMS		= BIT(6),  /* Enclosure Management support */
-+	HOST_CAP_CCC		= BIT(7),  /* Command Completion Coalescing */
-+	HOST_CAP_PART		= BIT(13), /* Partial state capable */
-+	HOST_CAP_SSC		= BIT(14), /* Slumber state capable */
-+	HOST_CAP_PIO_MULTI	= BIT(15), /* PIO multiple DRQ support */
-+	HOST_CAP_FBS		= BIT(16), /* FIS-based switching support */
-+	HOST_CAP_PMP		= BIT(17), /* Port Multiplier support */
-+	HOST_CAP_ONLY		= BIT(18), /* Supports AHCI mode only */
-+	HOST_CAP_CLO		= BIT(24), /* Command List Override support */
-+	HOST_CAP_LED		= BIT(25), /* Supports activity LED */
-+	HOST_CAP_ALPM		= BIT(26), /* Aggressive Link PM support */
-+	HOST_CAP_SSS		= BIT(27), /* Staggered Spin-up */
-+	HOST_CAP_MPS		= BIT(28), /* Mechanical presence switch */
-+	HOST_CAP_SNTF		= BIT(29), /* SNotification register */
-+	HOST_CAP_NCQ		= BIT(30), /* Native Command Queueing */
-+	HOST_CAP_64		= BIT(31), /* PCI DAC (64-bit DMA) support */
- 
- 	/* HOST_CAP2 bits */
-	HOST_CAP2_BOH		= (1 << 0),  /* BIOS/OS handoff supported */
-	HOST_CAP2_NVMHCI	= (1 << 1),  /* NVMHCI supported */
-	HOST_CAP2_APST		= (1 << 2),  /* Automatic partial to slumber */
-	HOST_CAP2_SDS		= (1 << 3),  /* Support device sleep */
-	HOST_CAP2_SADM		= (1 << 4),  /* Support aggressive DevSlp */
-	HOST_CAP2_DESO		= (1 << 5),  /* DevSlp from slumber only */
-+	HOST_CAP2_BOH		= BIT(0),  /* BIOS/OS handoff supported */
-+	HOST_CAP2_NVMHCI	= BIT(1),  /* NVMHCI supported */
-+	HOST_CAP2_APST		= BIT(2),  /* Automatic partial to slumber */
-+	HOST_CAP2_SDS		= BIT(3),  /* Support device sleep */
-+	HOST_CAP2_SADM		= BIT(4),  /* Support aggressive DevSlp */
-+	HOST_CAP2_DESO		= BIT(5),  /* DevSlp from slumber only */
- 
- 	/* registers for each SATA port */
- 	PORT_LST_ADDR		= 0x00, /* command list DMA addr */
-@@ -145,24 +146,25 @@ enum {
- 	PORT_DEVSLP		= 0x44, /* device sleep */
- 
- 	/* PORT_IRQ_{STAT,MASK} bits */
-	PORT_IRQ_COLD_PRES	= (1 << 31), /* cold presence detect */
-	PORT_IRQ_TF_ERR		= (1 << 30), /* task file error */
-	PORT_IRQ_HBUS_ERR	= (1 << 29), /* host bus fatal error */
-	PORT_IRQ_HBUS_DATA_ERR	= (1 << 28), /* host bus data error */
-	PORT_IRQ_IF_ERR		= (1 << 27), /* interface fatal error */
-	PORT_IRQ_IF_NONFATAL	= (1 << 26), /* interface non-fatal error */
-	PORT_IRQ_OVERFLOW	= (1 << 24), /* xfer exhausted available S/G */
-	PORT_IRQ_BAD_PMP	= (1 << 23), /* incorrect port multiplier */
-
-	PORT_IRQ_PHYRDY		= (1 << 22), /* PhyRdy changed */
-	PORT_IRQ_DEV_ILCK	= (1 << 7), /* device interlock */
-	PORT_IRQ_CONNECT	= (1 << 6), /* port connect change status */
-	PORT_IRQ_SG_DONE	= (1 << 5), /* descriptor processed */
-	PORT_IRQ_UNK_FIS	= (1 << 4), /* unknown FIS rx'd */
-	PORT_IRQ_SDB_FIS	= (1 << 3), /* Set Device Bits FIS rx'd */
-	PORT_IRQ_DMAS_FIS	= (1 << 2), /* DMA Setup FIS rx'd */
-	PORT_IRQ_PIOS_FIS	= (1 << 1), /* PIO Setup FIS rx'd */
-	PORT_IRQ_D2H_REG_FIS	= (1 << 0), /* D2H Register FIS rx'd */
-+	PORT_IRQ_COLD_PRES	= BIT(31), /* cold presence detect */
-+	PORT_IRQ_TF_ERR		= BIT(30), /* task file error */
-+	PORT_IRQ_HBUS_ERR	= BIT(29), /* host bus fatal error */
-+	PORT_IRQ_HBUS_DATA_ERR	= BIT(28), /* host bus data error */
-+	PORT_IRQ_IF_ERR		= BIT(27), /* interface fatal error */
-+	PORT_IRQ_IF_NONFATAL	= BIT(26), /* interface non-fatal error */
-+	PORT_IRQ_OVERFLOW	= BIT(24), /* xfer exhausted available S/G */
-+	PORT_IRQ_BAD_PMP	= BIT(23), /* incorrect port multiplier */
-+
-+	PORT_IRQ_PHYRDY		= BIT(22), /* PhyRdy changed */
-+	PORT_IRQ_DEV_ILCK	= BIT(7),  /* device interlock */
-+	PORT_IRQ_DMPS		= BIT(7),  /* mechanical presence status */
-+	PORT_IRQ_CONNECT	= BIT(6),  /* port connect change status */
-+	PORT_IRQ_SG_DONE	= BIT(5),  /* descriptor processed */
-+	PORT_IRQ_UNK_FIS	= BIT(4),  /* unknown FIS rx'd */
-+	PORT_IRQ_SDB_FIS	= BIT(3),  /* Set Device Bits FIS rx'd */
-+	PORT_IRQ_DMAS_FIS	= BIT(2),  /* DMA Setup FIS rx'd */
-+	PORT_IRQ_PIOS_FIS	= BIT(1),  /* PIO Setup FIS rx'd */
-+	PORT_IRQ_D2H_REG_FIS	= BIT(0),  /* D2H Register FIS rx'd */
- 
- 	PORT_IRQ_FREEZE		= PORT_IRQ_HBUS_ERR |
- 				  PORT_IRQ_IF_ERR |
-@@ -178,34 +180,34 @@ enum {
- 				  PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
- 
- 	/* PORT_CMD bits */
-	PORT_CMD_ASP		= (1 << 27), /* Aggressive Slumber/Partial */
-	PORT_CMD_ALPE		= (1 << 26), /* Aggressive Link PM enable */
-	PORT_CMD_ATAPI		= (1 << 24), /* Device is ATAPI */
-	PORT_CMD_FBSCP		= (1 << 22), /* FBS Capable Port */
-	PORT_CMD_ESP		= (1 << 21), /* External Sata Port */
-	PORT_CMD_HPCP		= (1 << 18), /* HotPlug Capable Port */
-	PORT_CMD_PMP		= (1 << 17), /* PMP attached */
-	PORT_CMD_LIST_ON	= (1 << 15), /* cmd list DMA engine running */
-	PORT_CMD_FIS_ON		= (1 << 14), /* FIS DMA engine running */
-	PORT_CMD_FIS_RX		= (1 << 4), /* Enable FIS receive DMA engine */
-	PORT_CMD_CLO		= (1 << 3), /* Command list override */
-	PORT_CMD_POWER_ON	= (1 << 2), /* Power up device */
-	PORT_CMD_SPIN_UP	= (1 << 1), /* Spin up device */
-	PORT_CMD_START		= (1 << 0), /* Enable port DMA engine */
-
-	PORT_CMD_ICC_MASK	= (0xf << 28), /* i/f ICC state mask */
-	PORT_CMD_ICC_ACTIVE	= (0x1 << 28), /* Put i/f in active state */
-	PORT_CMD_ICC_PARTIAL	= (0x2 << 28), /* Put i/f in partial state */
-	PORT_CMD_ICC_SLUMBER	= (0x6 << 28), /* Put i/f in slumber state */
-+	PORT_CMD_ASP		= BIT(27), /* Aggressive Slumber/Partial */
-+	PORT_CMD_ALPE		= BIT(26), /* Aggressive Link PM enable */
-+	PORT_CMD_ATAPI		= BIT(24), /* Device is ATAPI */
-+	PORT_CMD_FBSCP		= BIT(22), /* FBS Capable Port */
-+	PORT_CMD_ESP		= BIT(21), /* External Sata Port */
-+	PORT_CMD_HPCP		= BIT(18), /* HotPlug Capable Port */
-+	PORT_CMD_PMP		= BIT(17), /* PMP attached */
-+	PORT_CMD_LIST_ON	= BIT(15), /* cmd list DMA engine running */
-+	PORT_CMD_FIS_ON		= BIT(14), /* FIS DMA engine running */
-+	PORT_CMD_FIS_RX		= BIT(4),  /* Enable FIS receive DMA engine */
-+	PORT_CMD_CLO		= BIT(3),  /* Command list override */
-+	PORT_CMD_POWER_ON	= BIT(2),  /* Power up device */
-+	PORT_CMD_SPIN_UP	= BIT(1),  /* Spin up device */
-+	PORT_CMD_START		= BIT(0),  /* Enable port DMA engine */
-+
-+	PORT_CMD_ICC_MASK	= (0xfu << 28), /* i/f ICC state mask */
-+	PORT_CMD_ICC_ACTIVE	= (0x1u << 28), /* Put i/f in active state */
-+	PORT_CMD_ICC_PARTIAL	= (0x2u << 28), /* Put i/f in partial state */
-+	PORT_CMD_ICC_SLUMBER	= (0x6u << 28), /* Put i/f in slumber state */
- 
- 	/* PORT_FBS bits */
- 	PORT_FBS_DWE_OFFSET	= 16, /* FBS device with error offset */
- 	PORT_FBS_ADO_OFFSET	= 12, /* FBS active dev optimization offset */
- 	PORT_FBS_DEV_OFFSET	= 8,  /* FBS device to issue offset */
- 	PORT_FBS_DEV_MASK	= (0xf << PORT_FBS_DEV_OFFSET),  /* FBS.DEV */
-	PORT_FBS_SDE		= (1 << 2), /* FBS single device error */
-	PORT_FBS_DEC		= (1 << 1), /* FBS device error clear */
-	PORT_FBS_EN		= (1 << 0), /* Enable FBS */
-+	PORT_FBS_SDE		= BIT(2), /* FBS single device error */
-+	PORT_FBS_DEC		= BIT(1), /* FBS device error clear */
-+	PORT_FBS_EN		= BIT(0), /* Enable FBS */
- 
- 	/* PORT_DEVSLP bits */
- 	PORT_DEVSLP_DM_OFFSET	= 25,             /* DITO multiplier offset */
-@@ -213,45 +215,45 @@ enum {
- 	PORT_DEVSLP_DITO_OFFSET	= 15,             /* DITO offset */
- 	PORT_DEVSLP_MDAT_OFFSET	= 10,             /* Minimum assertion time */
- 	PORT_DEVSLP_DETO_OFFSET	= 2,              /* DevSlp exit timeout */
-	PORT_DEVSLP_DSP		= (1 << 1),       /* DevSlp present */
-	PORT_DEVSLP_ADSE	= (1 << 0),       /* Aggressive DevSlp enable */
-+	PORT_DEVSLP_DSP		= BIT(1),         /* DevSlp present */
-+	PORT_DEVSLP_ADSE	= BIT(0),         /* Aggressive DevSlp enable */
- 
- 	/* hpriv->flags bits */
- 
- #define AHCI_HFLAGS(flags)		.private_data	= (void *)(flags)
- 
-	AHCI_HFLAG_NO_NCQ		= (1 << 0),
-	AHCI_HFLAG_IGN_IRQ_IF_ERR	= (1 << 1), /* ignore IRQ_IF_ERR */
-	AHCI_HFLAG_IGN_SERR_INTERNAL	= (1 << 2), /* ignore SERR_INTERNAL */
-	AHCI_HFLAG_32BIT_ONLY		= (1 << 3), /* force 32bit */
-	AHCI_HFLAG_MV_PATA		= (1 << 4), /* PATA port */
-	AHCI_HFLAG_NO_MSI		= (1 << 5), /* no PCI MSI */
-	AHCI_HFLAG_NO_PMP		= (1 << 6), /* no PMP */
-	AHCI_HFLAG_SECT255		= (1 << 8), /* max 255 sectors */
-	AHCI_HFLAG_YES_NCQ		= (1 << 9), /* force NCQ cap on */
-	AHCI_HFLAG_NO_SUSPEND		= (1 << 10), /* don't suspend */
-	AHCI_HFLAG_SRST_TOUT_IS_OFFLINE	= (1 << 11), /* treat SRST timeout as
-							link offline */
-	AHCI_HFLAG_NO_SNTF		= (1 << 12), /* no sntf */
-	AHCI_HFLAG_NO_FPDMA_AA		= (1 << 13), /* no FPDMA AA */
-	AHCI_HFLAG_YES_FBS		= (1 << 14), /* force FBS cap on */
-	AHCI_HFLAG_DELAY_ENGINE		= (1 << 15), /* do not start engine on
-						        port start (wait until
-						        error-handling stage) */
-	AHCI_HFLAG_NO_DEVSLP		= (1 << 17), /* no device sleep */
-	AHCI_HFLAG_NO_FBS		= (1 << 18), /* no FBS */
-+	AHCI_HFLAG_NO_NCQ		= BIT(0),
-+	AHCI_HFLAG_IGN_IRQ_IF_ERR	= BIT(1), /* ignore IRQ_IF_ERR */
-+	AHCI_HFLAG_IGN_SERR_INTERNAL	= BIT(2), /* ignore SERR_INTERNAL */
-+	AHCI_HFLAG_32BIT_ONLY		= BIT(3), /* force 32bit */
-+	AHCI_HFLAG_MV_PATA		= BIT(4), /* PATA port */
-+	AHCI_HFLAG_NO_MSI		= BIT(5), /* no PCI MSI */
-+	AHCI_HFLAG_NO_PMP		= BIT(6), /* no PMP */
-+	AHCI_HFLAG_SECT255		= BIT(8), /* max 255 sectors */
-+	AHCI_HFLAG_YES_NCQ		= BIT(9), /* force NCQ cap on */
-+	AHCI_HFLAG_NO_SUSPEND		= BIT(10), /* don't suspend */
-+	AHCI_HFLAG_SRST_TOUT_IS_OFFLINE	= BIT(11), /* treat SRST timeout as
-+						      link offline */
-+	AHCI_HFLAG_NO_SNTF		= BIT(12), /* no sntf */
-+	AHCI_HFLAG_NO_FPDMA_AA		= BIT(13), /* no FPDMA AA */
-+	AHCI_HFLAG_YES_FBS		= BIT(14), /* force FBS cap on */
-+	AHCI_HFLAG_DELAY_ENGINE		= BIT(15), /* do not start engine on
-+						      port start (wait until
-+						      error-handling stage) */
-+	AHCI_HFLAG_NO_DEVSLP		= BIT(17), /* no device sleep */
-+	AHCI_HFLAG_NO_FBS		= BIT(18), /* no FBS */
- 
- #ifdef CONFIG_PCI_MSI
-	AHCI_HFLAG_MULTI_MSI		= (1 << 20), /* per-port MSI(-X) */
-+	AHCI_HFLAG_MULTI_MSI		= BIT(20), /* per-port MSI(-X) */
- #else
- 	/* compile out MSI infrastructure */
- 	AHCI_HFLAG_MULTI_MSI		= 0,
- #endif
-	AHCI_HFLAG_WAKE_BEFORE_STOP	= (1 << 22), /* wake before DMA stop */
-	AHCI_HFLAG_YES_ALPM		= (1 << 23), /* force ALPM cap on */
-	AHCI_HFLAG_NO_WRITE_TO_RO	= (1 << 24), /* don't write to read
-							only registers */
-	AHCI_HFLAG_IS_MOBILE		= (1 << 25), /* mobile chipset, use
-+	AHCI_HFLAG_WAKE_BEFORE_STOP	= BIT(22), /* wake before DMA stop */
-+	AHCI_HFLAG_YES_ALPM		= BIT(23), /* force ALPM cap on */
-+	AHCI_HFLAG_NO_WRITE_TO_RO	= BIT(24), /* don't write to read
-+						      only registers */
-+	AHCI_HFLAG_IS_MOBILE		= BIT(25), /* mobile chipset, use
- 							SATA_MOBILE_LPM_POLICY
- 							as default lpm_policy */
- 
-@@ -269,22 +271,22 @@ enum {
- 	EM_MAX_RETRY			= 5,
- 
- 	/* em_ctl bits */
-	EM_CTL_RST		= (1 << 9), /* Reset */
-	EM_CTL_TM		= (1 << 8), /* Transmit Message */
-	EM_CTL_MR		= (1 << 0), /* Message Received */
-	EM_CTL_ALHD		= (1 << 26), /* Activity LED */
-	EM_CTL_XMT		= (1 << 25), /* Transmit Only */
-	EM_CTL_SMB		= (1 << 24), /* Single Message Buffer */
-	EM_CTL_SGPIO		= (1 << 19), /* SGPIO messages supported */
-	EM_CTL_SES		= (1 << 18), /* SES-2 messages supported */
-	EM_CTL_SAFTE		= (1 << 17), /* SAF-TE messages supported */
-	EM_CTL_LED		= (1 << 16), /* LED messages supported */
-+	EM_CTL_RST		= BIT(9), /* Reset */
-+	EM_CTL_TM		= BIT(8), /* Transmit Message */
-+	EM_CTL_MR		= BIT(0), /* Message Received */
-+	EM_CTL_ALHD		= BIT(26), /* Activity LED */
-+	EM_CTL_XMT		= BIT(25), /* Transmit Only */
-+	EM_CTL_SMB		= BIT(24), /* Single Message Buffer */
-+	EM_CTL_SGPIO		= BIT(19), /* SGPIO messages supported */
-+	EM_CTL_SES		= BIT(18), /* SES-2 messages supported */
-+	EM_CTL_SAFTE		= BIT(17), /* SAF-TE messages supported */
-+	EM_CTL_LED		= BIT(16), /* LED messages supported */
- 
- 	/* em message type */
-	EM_MSG_TYPE_LED		= (1 << 0), /* LED */
-	EM_MSG_TYPE_SAFTE	= (1 << 1), /* SAF-TE */
-	EM_MSG_TYPE_SES2	= (1 << 2), /* SES-2 */
-	EM_MSG_TYPE_SGPIO	= (1 << 3), /* SGPIO */
-+	EM_MSG_TYPE_LED		= BIT(0), /* LED */
-+	EM_MSG_TYPE_SAFTE	= BIT(1), /* SAF-TE */
-+	EM_MSG_TYPE_SES2	= BIT(2), /* SES-2 */
-+	EM_MSG_TYPE_SGPIO	= BIT(3), /* SGPIO */
- };
- 
- struct ahci_cmd_hdr {
-- 
-2.43.0
-
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  394523e61eabf24bf920981ba967799ff90b6099a72dc1d1b92c918433439f61  linux-4.19.94-ti-r72.tar.gz
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  f591da9ab90ef3d6b3d173766d0ddff90c4ed7330680897486117df390d83c8f  u-boot-2024.07.tar.bz2
@@ -1 +0,0 @@
-../linux/linux.hash
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  f1ae7325c6c146e0f852866a3bfd3f90ae1b5f46e414bc99a38384ed677e3721  linux-6.6.32-ti-arm32-r7.tar.gz
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  b28daf4ac17e43156363078bf510297584137f6df50fced9b12df34f61a92fb0  u-boot-2024.10.tar.bz2
@@ -1 +0,0 @@
-../linux/linux.hash
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  c52bc1ffc396c11bce335c9ee5cd55fe4213cbc1fb4026ff62bb90c864c61f62  linux-5.10.217.tar.xz
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  0d438b1bb5cceb57a18ea2de4a0d51f7be5b05b98717df05938636e0aadfe11a  u-boot-2021.04.tar.bz2
@@ -1,4 +0,0 @@
-#!/bin/sh
-BOARD_DIR="$(dirname $0)"
-
-cp board/beagleboard/beagleboneai/uEnv.txt $BINARIES_DIR/uEnv.txt
@@ -1,5 +0,0 @@
-default buildroot
-label buildroot
-   kernel /Image
-   devicetreedir /
-append root=/dev/mmcblk1p2 rootwait rw console=ttyS2,115200n8
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  7efa89e1b4e4106ee05d68e876c8efbb146364d89cfd5d26bf4647b09c08f32b  arm-trusted-firmware-v2.10-git4.tar.gz
@@ -1 +0,0 @@
-../linux/linux.hash
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  b66a5b863b0f8669448b74ca83bd641a856f164b29956e539bbcb5fdeeab9cc6  linux-6.6.30.tar.xz
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  18a853fe39fad7ad03a90cc2d4275aeaed6da69735defac3492b80508843dd4a  u-boot-2024.04.tar.bz2
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  18a853fe39fad7ad03a90cc2d4275aeaed6da69735defac3492b80508843dd4a  u-boot-2024.04.tar.bz2
@@ -1,7 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname "$0")"
-
-ln -sf tispl.bin_unsigned "$BINARIES_DIR"/tispl.bin
-
-install -m 0644 -D "$BOARD_DIR"/extlinux.conf "$BINARIES_DIR"/extlinux/extlinux.conf
@@ -1,39 +0,0 @@
-BeagleBoard.org BeagleBone AI-64 Development Board
-
-Description
-===========
-
-This configuration will build a basic image for the BeagleBoard.org
-BeagleBone AI-64. For more details about the board, visit:
-
-https://www.beagleboard.org/boards/beaglebone-ai-64
-
-How to Build
-============
-
-Select the default configuration for the target:
-
-$ make beagleboneai64_defconfig
-
-Optional: modify the configuration:
-
-$ make menuconfig
-
-Build:
-
-$ make
-
-To copy the resultimg output image file to an SD card use dd:
-
-$ dd if=output/images/sdcard.img of=/dev/sdX bs=1M
-
-How to Run
-==========
-
-Insert the SD card into the BeagleBone AI-64 board, and power it up
-through the USB Type-C connector. The system should come up (make sure
-to boot from the SD card not from the eMMC). You can use a USB to
-serial adapter to connect to the connector labeled UART0 (J3) to
-communicate with the board.
-
-https://docs.beagleboard.org/latest/boards/beaglebone/ai-64/02-quick-start.html
@@ -1,5 +0,0 @@
-label beagleplay-buildroot
-    kernel /Image
-    fdtdir /
-    devicetree /k3-am625-beagleplay.dtb
-    append console=ttyS2,115200n8 root=/dev/mmcblk1p2 rw rootfstype=ext4 rootwait earlycon=ns16550a,mmio32,0x02800000
@@ -1,39 +0,0 @@
-image boot.vfat {
-        vfat {
-            files = {
-                    "Image",
-                    "k3-am625-beagleplay.dtb",
-                    "tiboot3.bin",
-            }
-
-            file tispl.bin {
-                    image = tispl.bin_unsigned
-            }
-
-            file u-boot.img {
-                    image = u-boot.img_unsigned
-            }
-
-            file extlinux/extlinux.conf {
-                    image = extlinux.conf
-            }
-        }
-
-        size = 64M
-}
-
-image sdcard.img {
-        hdimage {
-        }
-
-        partition u-boot {
-                partition-type = 0xC
-                bootable = "true"
-                image = "boot.vfat"
-        }
-
-        partition rootfs {
-                partition-type = 0x83
-                image = "rootfs.ext4"
-        }
-}
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  c0f23ccc71c49989e9ad238acf334473c17b7c88f79a20c829c3d443e3794a22  arm-trusted-firmware-v2.11-git4.tar.gz
@@ -1 +0,0 @@
-../linux/linux.hash
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  774698422ee54c5f1e704456f37c65c06b51b4e9a8b0866f34580d86fef8e226  linux-6.10.tar.xz
@@ -1 +0,0 @@
-../uboot/uboot.hash
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  f591da9ab90ef3d6b3d173766d0ddff90c4ed7330680897486117df390d83c8f  u-boot-2024.07.tar.bz2
@@ -1,5 +0,0 @@
-#!/bin/sh -x
-
-BOARD_DIR="$(dirname "$0")"
-
-install -m 0644 -D "$BOARD_DIR"/extlinux.conf "$BINARIES_DIR"/extlinux.conf
@@ -1,39 +0,0 @@
-BeagleBoard's BeaglePlay
-
-Description
-===========
-
-This configuration will build a complete image for the BeaglePlay
-board: https://www.beagleboard.org/boards/beagleplay
-
-How to Build
-============
-
-Select the default configuration for the target:
-
-    $ make beagleplay_defconfig
-
-Optional: modify the configuration:
-
-    $ make menuconfig
-
-NOTE: The AM625x processor has multiple security variants. You must
-ensure the matching tiboot3.bin is uses or the board will not boot.
-The BeaglePlay uses the General Purpose (GP) variant, ensure you use
-the tiboot3-am62x-gp-evm.bin
-
-Build:
-
-    $ make
-
-To copy the resultimg output image file to an SD card use dd:
-
-    $ dd if=output/images/sdcard.img of=/dev/sdX bs=1M
-
-How to Run
-==========
-
-This configuration has both the boot/ and root/ partitions which is
-capable of booting from the bootloaders embedded in the eMMC as well
-as when using holding the USR button to boot from the SD card.
-
@@ -1,134 +0,0 @@
-Beagle-V Fire
-==============
-
-BeagleV Fire is a low-cost RISC-V 64-bit based platform, powered by
-Microchip's PolarFire SoC. This file describes how to use the
-pre-defined Buildroot configuration for the Beagle-V Fire board.
-
-Further information about the Beagle-V Fire can be found at
-https://docs.beagleboard.org/latest/boards/beaglev/fire/index.html.
-
-
-Building
-========
-
-Configure Buildroot using the default board configuration:
-
-  '$ make beaglev_fire_defconfig'
-
-Customise the build as necessary:
-
-  '$ make menuconfig'
-
-Start the build:
-
-  '$ make'
-
-
-Result of the build
-===================
-
-Once the build has finished you will have the following files:
-
-    output/images/
-    +-- boot.scr
-    +-- boot.vfat
-    +-- Image
-    +-- Image.gz
-    +-- beaglev_fire.itb
-    +-- beaglev_fire.its
-    +-- mpfs-beaglev-fire.dtb
-    +-- payload.bin
-    +-- rootfs.ext2
-    +-- rootfs.ext4
-    +-- rootfs.tar
-    +-- sdcard.img
-    +-- u-boot.bin
-
-
-Flashing the image to your eMMC
-===============================
-
-By default Buildroot builds an image suitable for the eMMC. The first partition
-of this image contains a U-Boot binary, embedded in a Hart Software Services
-(HSS) payload. The second partition contains a FAT filesystem with a U-Boot env
-and an ITB file containing the kernel and the device tree. The third partition
-contains the file system. This image can be written directly to the eMMC.
-
-To do so, follow the below steps:
-
-1. Connect to BeagleV-Fire UART debug port using a 3.3v USB to UART bridge.
-
-2. Now you can run `tio <port>` in a terminal window to access the UART debug
-port connection.
-  e.g `tio /dev/ttyUSB4`
-
-3. Once you are connected properly, you can press the Reset button which will
-show you a progress bar.
-
-4. Press any key in the terminal application to stop the HSS from booting. This
-will give you access to the HSS command line interface and a ">>" for input
-will be displayed in the terminal.
-
-5. Type `usbdmsc` in the HSS command line interface. The HSS `usbdmsc` command
-exposes the eMMC as a USB mass storage device using the USB type C connector.
-If successful, a message saying "USB Host connected" will be displayed.
-
-6. The eMMC should now appear as mass storage device/drive on your host PC, as
-it is mounted through your USB type C connector.
-
-7. Now, all you need to do is dd the image to the eMMC, which can be done with
-the following command on your development host:
-
-  '$ sudo dd if=output/images/sdcard.img of=/dev/sdX bs=1M'
-
-You will have to replace /dev/sdX by the actual device name of your eMMC.
-Please, be especially cautious not to overwrite the wrong drive as this cannot
-be undone.
-
-8. Once the image transfer has completed you can type `CTRL+C` to disconnect
-your device.
-
-9. Finally, type `boot` or reset your board to boot your new Linux image.
-
-Customize BeagleV-Fire Cape Gateware Using Verilog (Optional)
-=============================================================
-
-To customize your Beagle-V Fire gateware please follow the guide below to
-create your custom bitstream (steps 1 - 6):
-https://docs.beagleboard.org/latest/boards/beaglev/fire/demos-and-tutorials/gateware/customize-cape-gateware-verilog.html
-
-
-  Program BeagleV-Fire With Your Custom Bitstream with Buildroot
-  ==============================================================
-
-  After following the steps 1-6 from the above tutorial, you should now have a
-  artifacts.zip file on your local host.
-
-  Unzip the downloaded artifacts.zip file.
-
-  Go to the custom FPGA design directory:
-    'cd artifacts/bitstreams/my_custom_fpga_design'
-
-  On your Linux host development computer, copy the bitstream to BeagleV-Fire
-  board, replacing </path/to/your/> with the path to your BeagleV-Fire root file
-  system.
-    'cp -r ./LinuxProgramming /path/to/your/buildroot/board/beagleboard/beaglev_fire/rootfs-overlay/etc/'
-
-  To apply these changes to your image, make sure to re-build it with:
-    `make`
-
-  Then, re-flash your image - to ensure you have the necessary firmware files - by
-  following the above section "Flashing the image to your eMMC".
-
-  On BeagleV-Fire,
-    1. Make your update gateware script executable
-      'chmod +x /usr/share/microchip/update-gateware.sh'
-    2. Create a firmware directory
-      'mkdir /lib/firmware'
-    3. Change to the directory of your gateware script
-      `cd /usr/share/microchip/`
-    3. initiate the reprogramming of the FPGA with your gateware bitstream:
-      './update-gateware.sh /etc/LinuxProgramming/'
-
-  Wait for a couple of minutes for the BeagleV-Fire to reprogram itself.
--- a/Show More
+++ b/Show More