The download and homepage URL for this project have been
updated. The old site no longer works.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 2a547e2c42)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Django 5.0.7 fixes the following CVEs:
* CVE-2024-38875: Potential denial-of-service vulnerability in django.utils.html.urlize()
* CVE-2024-39329: Username enumeration through timing difference for users with unusable passwords
* CVE-2024-39330: Potential directory-traversal via Storage.save()
* CVE-2024-39614: Potential denial-of-service vulnerability in get_supported_language_variant()
Django 5.0.8 fixes the following CVEs:
* CVE-2024-41989: Memory exhaustion in django.utils.numberformat.floatformat()
* CVE-2024-41990: Potential denial-of-service vulnerability in django.utils.html.urlize()
* CVE-2024-41991: Potential denial-of-service vulnerability in django.utils.html.urlize() and AdminURLFieldWidget
* CVE-2024-42005: Potential SQL injection in QuerySet.values() and values_list()
Further release Notes: https://docs.djangoproject.com/en/5.0/releases/
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit f777ce1fd6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 9696d27756 "package/gpsd: condition python stuff to the proper
kconfig option" changed the condition in which the gpsd python scripts
are installed. After that change, the "gpsfake" command (which is a
python script) is no longer found and the runtime test is failing.
This commit fixes the issue by reflecting the change in the runtime
test Buildroot configuration.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b6f4d79df2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This didn't work out as planned, neither the restriction of muting
unregistered users, nor the exception for matrix users worked as planned.
The channel mode has been reverted to +R (meaning only registered users
are allowed to join) and an exception for *that* has been introduced for
matrix users via +e. The channel modes are documented in [1].
[1] https://www.oftc.net/ChannelModes/
This reverts commit d1e6d7845b.
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit bede54c774)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit allows the package patches to be applied with fuzz factor 0.
The fuzz factor specifies how many lines of the patch can be inexactly
matched, so the value 0 requires all lines to be exactly matched.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 06b5ce9f04)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The mysql virtual package was removed in commit 8708f3a23a
"package/mysql: drop virtual package".
The mariadb runtime test was authored before this mysql virtual
package removal, but was merged after it, in commit 5356754d1e
"support/testing: add mariadb runtime test". Due to this, this test
always failed with the error:
Makefile.legacy:9: *** "You have legacy configuration in your .config! Please check your configuration.". Stop.
This commit fixes the issue by removing the legacy
BR2_PACKAGE_MYSQL=y configuration directive.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7540345406
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 3da3361a1b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Maeva told me personally she will no longer contribute to Buildroot
for the time being. This commit removes all the associated DEVELOPERS
entries.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 92d652df48)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we have a Kconfig symbol to enable the python support in
gpsd, but the condition at configure time is based on whether the python
package is enabled. So, if a user does not enable python support in
gpsd, they still get it.
Switch to using the proper symbol.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Bernd Kuhls <bernd@kuhls.net>
Reviewed-by: Jan Havran <havran.jan@email.cz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 9696d27756)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Pass USE_LIBDRM=OFF to the wpewebkit CMake configuration step when the
libdrm package has not been selected.
WPE WebKit can be built without libdrm support, and it will still work
with backends that use other platform-specific methods to handle
graphics buffers and/or presenting content onto an output. For example
this is the case with wpebackend-rdk configured to use rpi-userland,
which uses dispmanx to produce the output instead of DRM/KMS.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 65f8174648)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With GCC 14.x as the host compiler, bcusdk fails to build as follows:
configure: error: Specified CC_FOR_BUILD doesn't seem to work
This is due to missing includes in the test programs used in the
configure script to check the host compiler. We fix this with patch
0003.
However, this patch requires to autoreconf the package, and autoreconf
would need the definition of AM_PATH_XML2, which would require libxml2
even though we don't have libxml2 as a dependency of this package (we
don't enable the features that requires libxml2). As it turns out that
the AM_PATH_XML2 macro is in fact deprecated, we replaced it by its
equivalent using PKG_CHECK_MODULES(), which is in fact exactly how
AM_PATH_XML2 is implemented in upstream libxml2.
Fixes:
http://autobuild.buildroot.net/results/458880bd6c207e5bb7afce1a1186f204c30c0941/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit e4109c1d2d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch 0001 has been submitted upstream, but the formatting of the
tag was not correct, let's fix this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 668867bfed)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mdio-tools depends on CONFIG_MDIO_DEVICE in order for mdiobus driver to
be built, but CONFIG_MDIO_DEVICE depends on CONFIG_NETDEVICES which we
are not enabling so on platforms without it enabled in kernel config
building mdio-tools will fail with:
ERROR: modpost: "mdio_find_bus" [output-1/build/mdio-tools-1.3.1/kernel/mdio-netlink.ko] undefined!
ERROR: modpost: "__mdiobus_c45_read" [output-1/build/mdio-tools-1.3.1/kernel/mdio-netlink.ko] undefined!
ERROR: modpost: "__mdiobus_read" [output-1/build/mdio-tools-1.3.1/kernel/mdio-netlink.ko] undefined!
ERROR: modpost: "__mdiobus_c45_write" [output-1/build/mdio-tools-1.3.1/kernel/mdio-netlink.ko] undefined!
ERROR: modpost: "__mdiobus_write" [output-1/build/mdio-tools-1.3.1/kernel/mdio-netlink.ko] undefined!
So enable CONFIG_NETDEVICES as well to make sure CONFIG_MDIO_DEVICE can be enabled.
Fixes: http://autobuild.buildroot.net/results/edf47df96cde6094c890c0b74034cced90335a39/
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b95fff0185)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
All patches of the odb package already contained relevant Upstream
information, just not formatted according to how we expect it. Let's
fix that, and drop the .checkpackageignore entries that are no longer
needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 84ae3b04fe)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On the architectures that supports libsanitizer (part of gcc), the
build is currently failing with BR2_TIME_BITS_64=y. This is because
some code in libsanitizer unsets _FILE_OFFSET_BITS, but building code
with _FILE_OFFSET_BITS unset, but _TIME_BITS set isn't legal.
To fix this, this commit backports two changes:
- One change to also unset _TIME_BITS in
sanitizer_platform_limits_posix.cpp. This change is upstream in
LLVM, and already part of GCC 14.x, so we only bringing it to GCC
12.x and GCC 13.x.
- A second change doing the same modification, but in
sanitizer_procmaps_solaris.cpp, which as crazy as it might sound,
also gets compiled on Linux platforms (but to basically an empty
file). This change has been submitted upstream to both LLVM and gcc.
Notes:
- the special PowerPC SPE version of GCC cannot be affected, as only
uClibc-ng is used for this architecture, and uClibc-ng doesn't use
_TIME_BITS=64 (but now default to 64-bit time_t on 32-bit
architectures, like musl does).
- the special ARC version doesn't need patching because libsanitizer
doesn't support the ARC architecture, so it doesn't get built
Fixes:
http://autobuild.buildroot.net/results/ff2dbfdabf0bb6a0d82ea8a80122ab97fd75bd3f/https://gitlab.com/buildroot.org/buildroot/-/issues/16
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 81a4b6e7b8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The kconfig infra defines a 'PKG_KCONFIG_MAKE' var that wraps all the
standard kconfig options. Switch to this so we aren't duplicating the
logic.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 009d31b438)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 'linux-diff-config' target fails with the below error when
PER_PACKAGE_DIRECTORIES is enabled and the 'host-finalize' target hasn't
run yet.
scripts/Kconfig.include:39: C compiler '.../buildroot/output/host/bin/arm-buildroot-linux-gnueabihf-gcc' not found
The 'PPD' variable isn't defined for this target, so 'BR_PATH' falls
back to the final host directory.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 641084bfb3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 'linux-savedefconfig' target fails with the below error when
PER_PACKAGE_DIRECTORIES is enabled and the 'host-finalize' target hasn't
run yet.
scripts/Kconfig.include:39: C compiler '.../buildroot/output/host/bin/arm-buildroot-linux-gnueabihf-gcc' not found
The 'PPD' variable isn't defined for this target, so 'BR_PATH' falls
back to the final host directory.
Reported-by: Nathaniel Roach <nroach44@gmail.com>
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit de11afaa34)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Runtime tests running on test runners are subject to a high
variability in term of performance and timing. Most or the runtime
test commands are executed with a timeout, in pexpect.
Slow or very loaded test runners can use the timeout_multiplier to
globally increase those timeouts.
Some runtime test commands sometimes needs to poll or query a state,
rather than having purely sequential actions. It is sometimes hard to
know, from the test writer point of view, the maximum timeout to set, or
if a retry logic is needed.
In order to help debugging runtime tests failing due very slow
execution, this commit adds extra information on the host test runner
about its load in the run log. Relevant information are: number of
cpus, the load average at the moment the emulator is started and the
current timeout_multiplier.
Note: this change was discussed in:
https://lists.buildroot.org/pipermail/buildroot/2024-July/759119.html
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 7a6edbc7b9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with gcc >= 14 which enables
-Werror=implicit-function-declaration
(https://gcc.gnu.org/gcc-14/porting_to.html):
nfs-stat.c: In function 'main':
nfs-stat.c:287:30: error: implicit declaration of function 'ctime' [-Wimplicit-function-declaration]
287 | printf("Access: %s", ctime( (const time_t *) &st.nfs_atime));
| ^~~~~
nfs-stat.c:177:1: note: 'ctime' is defined in header '<time.h>'; this is probably fixable by adding '#include <time.h>'
176 | #include <pwd.h>
+++ |+#include <time.h>
177 | char *uid_to_name(int uid)
Fixes:
- http://autobuild.buildroot.org/results/73c3828a4e5d275ca0dfdd5b314494e2b00393c8
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c19a417674)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The libpwquality package provides the pam_pwquality PAM module - the
replacement for pam_cracklib that was dropped from linux-pam back in
version 1.5.0. However, it currently installs it to the wrong place,
so passwd and friends fail to find it. This commit sets the security
directory path to /lib/security to match the corresponding setting in
linux-pam.mk.
Note that libpwquality has *always* installed pam_pwquality in the wrong
place, since version 1.3.0 was added to buildroot in 2017 in commit
462040443c. However, back then, linux-pam
version 1.3.0 still provided pam_cracklib for advanced password checking.
Linux-pam deprecated pam_cracklib in 1.4.0 but still built it for us when
linux-pam.mk set --enable-cracklib. Linux-PAM deleted pam_cracklib
altogether in 1.5.0, so it was not until our update to linux-pam-1.5.1
in commit 276f1e0a89 that pam_cracklib
became unavailable. After that point, pam_pwquality was the only
alternative for PAM-based password checking.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 541eb8bf7d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit allows the package patches to be applied with fuzz factor 0.
The fuzz factor specifies how many lines of the patch can be inexactly
matched, so the value 0 requires all lines to be exactly matched.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit f5226cd6b7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When using BR2_STATIC_LIBS=y, tinysshd's build was successful, but the
binary didn't work on the final target: this is because a dynamically
linked ELF was produced, on a target having no dynamic loader at all.
Using $(TARGET_CONFIGURE_OPTS) propagates all the options and not only
"CC", resulting in a correct static binary able to run on the target.
Without the patch:
> tinysshd: ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV),
> dynamically linked, interpreter /lib/ld-musl-armhf.so.1, stripped
With the patch:
> tinysshd: ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV),
> statically linked, stripped
Fixes: a7b3de8a3b
Signed-off-by: Martin Wetterwald <martin@wetterwald.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 90e22ff48b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ac_cv_func_strerror_r_char_p is hardcoded to no since commit
74b9bf9945 back in 2005 however strerror_r
only returns an int with musl. With glibc or uclibc, strerror_r returns
a char* or an int depending on _GNU_SOURCE value resulting in the
following build failure with gcc >= 14:
strerror_r.c: In function 'rpl_strerror_r':
strerror_r.c:207:9: error: assignment to 'int' from 'char *' makes integer from pointer without a cast [-Wint-conversion]
207 | ret = strerror_r (errnum, buf, buflen);
| ^
To fix this build failure, don't hardcode ac_cv_func_strerror_r_char_p
to let coreutils pick the correct value
Fixes:
- http://autobuild.buildroot.org/results/8bc649ca5490b0c29c90383edfa2e693f154ebc4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 2822fdd0bc)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This update addresses the issue of uClibc support by skipping ZFS tests
that require SEEK_DATA support.
This is a work-in-progress patch while we wait for an upstream fix.
Current upstream efforts can be followed here:
https://github.com/openzfs/zfs/pull/16169
Context:
- OpenZFS includes a test for a bug that occurs when copying a large
number of PUNCHED files.
- OpenZFS has backported this test to v2.2.x.
- uClibc does not support SEEK_DATA and SEEK_HOLE.
- The ZFS test `cp_stress` can not be compiled using uClibc.
This commit fix:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/7391793226
Signed-off-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit f17fa2c905)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Drop patches (already in version)
- libevent is mandatory since
https://github.com/ffainelli/faifa/commit/d2339c2a7680e7c87555650e19123e27e1f12031
- This bump will fix the following build failure with gcc >= 14:
hpav_cfg.c: In function 'pushbutton_request':
hpav_cfg.c:256:37: error: passing argument 2 of 'send_vendor_pkt' makes pointer from integer without a cast [-Wint-conversion]
256 | return send_vendor_pkt(ctx, mac, HPAV_MMTYPE_MS_PB_ENC,
| ^~~
| |
| uint8_t {aka unsigned char}
hpav_cfg.c:123:64: note: expected 'const uint8_t *' {aka 'const unsigned char *'} but argument is of type 'uint8_t' {aka 'unsigned char'}
123 | static int send_vendor_pkt(struct context *ctx, const uint8_t *to,
| ~~~~~~~~~~~~~~~^~
hpav_cfg.c: In function 'main':
hpav_cfg.c:406:48: error: passing argument 2 of 'pushbutton_request' makes integer from pointer without a cast [-Wint-conversion]
406 | ret = pushbutton_request(&ctx, mac);
| ^~~
| |
| uint8_t * {aka unsigned char *}
hpav_cfg.c:254:60: note: expected 'uint8_t' {aka 'unsigned char'} but argument is of type 'uint8_t *' {aka 'unsigned char *'}
254 | static int pushbutton_request(struct context *ctx, uint8_t mac)
| ~~~~~~~~^~~
Fixes:
- http://autobuild.buildroot.org/results/5a65337366e52c6234d8d154b7e9a0296e02f1dd
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 061b5806d1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised since bump of glibc to version
2.39 in commit b5680f53d6:
In file included from /home/buildroot/instance-0/output-1/build/sconeserver-8d1935919a2013358993a8e9dfa992cbde56e503/sconex/ScriptBase.h:25,
from /home/buildroot/instance-0/output-1/build/sconeserver-8d1935919a2013358993a8e9dfa992cbde56e503/http/AuthRealm.h:26,
from /home/buildroot/instance-0/output-1/build/sconeserver-8d1935919a2013358993a8e9dfa992cbde56e503/http/AuthRealm.cpp:23:
/home/buildroot/instance-0/output-1/build/sconeserver-8d1935919a2013358993a8e9dfa992cbde56e503/sconex/sconex.h:124:12: fatal error: crypt.h: No such file or directory
124 | # include <crypt.h>
| ^~~~~~~~~
Fixes: b5680f53d6
- http://autobuild.buildroot.org/results/24461bdb0a5d9a062b682ae3aeefa73c0408040b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 701cf686bd)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enable DES in openssl to avoid the following build failure raised since
commit a83d41867c:
crypto/apr_crypto_openssl.c: In function 'crypto_cipher_mechanism':
crypto/apr_crypto_openssl.c:385:27: error: implicit declaration of function 'EVP_des_ede3_cbc'; did you mean 'NID_des_ede3_cbc'? [-Wimplicit-function-declaration]
385 | key->cipher = EVP_des_ede3_cbc();
| ^~~~~~~~~~~~~~~~
| NID_des_ede3_cbc
Fixes: a83d41867c
- http://autobuild.buildroot.org/results/4b1088a705f8564f85e629316f5cfc92953f0047
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 8bb67c230b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Change the name from "Micro Python" (two words) to "MicroPython"
(camelcase), to match the official website and documentation.
Signed-off-by: J. Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 161c25aee1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with gcc >= 14:
termcap.c:45:14: error: conflicting types for 'boolcodes'; have 'char *[]'
45 | static char *boolcodes[] = {
| ^~~~~~~~~
In file included from ../../Src/zshterm.h:1,
from ../../Src/zsh_system.h:932,
from ../../Src/zsh.mdh:17,
from termcap.mdh:17,
from termcap.c:38:
/home/autobuild/autobuild/instance-0/output-1/host/or1k-buildroot-linux-uclibc/sysroot/usr/include/term.h:764:56: note: previous declaration of 'boolcodes' with type 'const char * const[]'
764 | extern NCURSES_EXPORT_VAR(NCURSES_CONST char * const ) boolcodes[];
| ^~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/fe2f7170465e96cc1de3dae139a25f615331f4b9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 910e91f3b0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with gcc >= 14:
libcli.c: In function 'cli_register_command':
libcli.c:430:27: error: 'calloc' sizes specified with 'sizeof' in the earlier argument and not in the later argument [-Werror=calloc-transposed-args]
430 | if (!(c = calloc(sizeof(struct cli_command), 1))) return NULL;
| ^~~~~~
libcli.c:430:27: note: earlier argument should specify number of elements, later size of each element
Fixes:
- http://autobuild.buildroot.org/results/a170d27689e069cf58f830bdd74f604364ee503b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a5466a4303)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Include stdio.h to avoid that __progname check wrongly returned that
the function is unavailable with gcc >= 14 which enables
-Werror=implicit-function-declaration
(https://gcc.gnu.org/gcc-14/porting_to.html):
configure:5231: checking if libc defines __progname
configure:5249: /home/autobuild/autobuild/instance-7/output-1/host/bin/sh4-buildroot-linux-musl-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -static -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5
conftest.c: In function 'main':
conftest.c:73:27: error: implicit declaration of function 'printf' [-Wimplicit-function-declaration]
73 | extern char *__progname; printf("%s", __progname);
| ^~~~~~
conftest.c:1:1: note: include '<stdio.h>' or provide a declaration of 'printf'
1 | /* confdefs.h */
conftest.c:73:27: warning: incompatible implicit declaration of built-in function 'printf' [-Wbuiltin-declaration-mismatch]
73 | extern char *__progname; printf("%s", __progname);
| ^~~~~~
conftest.c:73:27: note: include '<stdio.h>' or provide a declaration of 'printf'
resulting in the following static build failure:
/home/autobuild/autobuild/instance-7/output-1/host/lib/gcc/sh4-buildroot-linux-musl/14.1.0/../../../../sh4-buildroot-linux-musl/bin/ld: /home/autobuild/autobuild/instance-7/output-1/host/sh4-buildroot-linux-musl/sysroot/lib/libc.a(libc.o):(.bss.__progname+0x0): multiple definition of `__progname'; autossh.o:(.bss+0x120): first defined here
Fixes:
- http://autobuild.buildroot.org/results/5d80a8096d0f5529cbd86903a74f3bab3d230f4a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 65672b9cd0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with host gcc >= 14 which enables
-Werror=implicit-function-declaration
(https://gcc.gnu.org/gcc-14/porting_to.html):
configure:9998: checking build system compiler /usr/bin/gcc
configure:10011: /usr/bin/gcc conftest.c
conftest.c: In function 'main':
conftest.c:4:3: error: implicit declaration of function 'exit' [-Wimplicit-function-declaration]
4 | exit(0);
| ^~~~
conftest.c:1:1: note: include '<stdlib.h>' or provide a declaration of 'exit'
+++ |+#include <stdlib.h>
1 | int
conftest.c:4:3: warning: incompatible implicit declaration of built-in function 'exit' [-Wbuiltin-declaration-mismatch]
4 | exit(0);
| ^~~~
conftest.c:4:3: note: include '<stdlib.h>' or provide a declaration of 'exit'
configure:10014: $? = 1
configure:10021: result: no
configure:10026: error: Specified CC_FOR_BUILD doesn't seem to work
Fixes:
- http://autobuild.buildroot.org/results/3ab381f06d5dc030039b6f6f8d19feb55cf3367d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3bb426628c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the default (newest) kernel headers series changes the build can
break. Example error message:
Incorrect selection of kernel headers: expected 6.8.x, got 6.5.x
In the above case the defconfig used:
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.5.9"
The kernel headers were not specified, so the build defaulted to using
the kernel sources as header source and the default (newest) header
series. From .config:
BR2_KERNEL_HEADERS_AS_KERNEL=y
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_8=y
Signed-off-by: Gero Schwäricke <gero.schwaericke@posteo.de>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit eb519ad7cc)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
*ucontext functions are only implemented for a subset of
uClibc supported architectures. To allow the external library
libucontext to be used this small patch is required.
Tested for riscv64.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit f761a8c451)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When glibc was bumped to version 2.39 in commit
b5680f53d6, it removed the deprecated
libcrypt support.
Until the upgrade of glibc to 2.39, Busybox could rely on the libcrypt
provided by glibc. Since version 2.39, glibc no longer provides
libcrypt, causing a build failure with Busybox configurations that
have CONFIG_USE_BB_CRYPT disabled.
To fix this, add the libxcrypt dependency to Busybox when
BR2_PACKAGE_LIBXCRYPT is selected. The user is still responsible for
enabling BR2_PACKAGE_LIBXCRYPT when their Busybox configuration has
CONFIG_USE_BB_CRYPT disabled.
Signed-off-by: Fred Lefranc <fred.lefranc+evs@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a22f17881c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Release Notes: https://nodejs.org/en/blog/release/v20.15.1
Fixes the following CVE's:
CVE-2024-36138 - Bypass incomplete fix of CVE-2024-27980 (High)
CVE-2024-22020 - Bypass network import restriction via data URL (Medium)
CVE-2024-22018 - fs.lstat bypasses permission model (Low)
CVE-2024-36137 - fs.fchown/fchmod bypasses permission model (Low)
CVE-2024-37372 - Permission model improperly processes UNC paths (Low)
Also these additional CVE's were fixed in the v20.12.1 and v20.12.2 releases [1][2]:
CVE-2024-27983 - Assertion failed in node::http2::Http2Session::~Http2Session() leads to HTTP/2 server crash- (High)
CVE-2024-27982 - HTTP Request Smuggling via Content Length Obfuscation - (Medium)
CVE-2024-27980 - Command injection via args parameter of child_process.spawn without shell option enabled on Windows
NodeJS tests are passing:
$ ./support/testing/run-tests -o ./outputs/ -k tests.package.test_nodejs -d dl
12:02:58 TestNodeJSModuleHostSrc Starting
12:02:58 TestNodeJSModuleHostSrc Building
13:17:15 TestNodeJSModuleHostSrc Building done
13:17:23 TestNodeJSModuleHostSrc Cleaning up
.13:17:23 TestNodeJSModuleHostBin Starting
13:17:23 TestNodeJSModuleHostBin Building
14:06:15 TestNodeJSModuleHostBin Building done
14:06:20 TestNodeJSModuleHostBin Cleaning up
.14:06:20 TestNodeJSBasic Starting
14:06:20 TestNodeJSBasic Building
14:55:40 TestNodeJSBasic Building done
14:55:45 TestNodeJSBasic Cleaning up
LICENSE hash changed due to changes in vendored components:
* copyright year update and adding spdx identifier [1]
[1] https://nodejs.org/en/blog/release/v20.12.1
[2] https://nodejs.org/en/blog/release/v20.12.2
[3] https://github.com/nodejs/node/commit/d5a316f5ea3fade3140c2ae35c144b500fb5d758
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit bffb6a2339)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
GCC14 will give errors for missing function declarations and
missing return types :
dhry_1.c:75:1: error: return type defaults to ‘int’ [-Wimplicit-int]
75 | main(int argc, char *argv[])
| ^~~~
dhry_1.c: In function ‘main’:
dhry_1.c:159:5: error: implicit declaration of function ‘Proc_5’ [-Wimplicit-function-declaration]
159 | Proc_5();
| ^~~~~~
Fixes:
http://autobuild.buildroot.net/results/8e65ba30efd5a6bca197f24ced2db1f8226b2c51/
Signed-off-by: Steffen Persvold <spersvold@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3847a145c2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
dhrystone is basically a dead project, so there is no Git repo
available anywhere, no new release, nothing.
Despite that, let's reformat the patches with "git format-patch", keep
the original authorship but add my SoB since I'm reintroducing the
patches, and indicate the Upstream: status.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 95013777cf)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 9a66711be1 ("package/tar: fix
linking with libiconv") added two patches that patch Makefile.am
files, but it forgot to add TAR_AUTORECONF = YES.
However, a gotcha is that TAR_AUTORECONF = YES would apply to both the
target tar, but also the host tar. But for host-tar, we can't accept
to do an autoreconf, because this would cause host-tar to have a
dependency on host-{autoconf,automake,libtool}, which in turn would
have a dependency on host-tar.
Since anyway the patches 0002/0003 that modify Makefile.am are only
useful to fix a libiconv problem that occurs when building target tar,
we disable autoreconf for host-tar, and we prevent automatic
autoreconf by touching the right Makefile.in files. This mess can be
dropped next time we update tar, as 0002/0003 will be part of the next
tar release.
Fixes:
http://autobuild.buildroot.net/results/efdf7cf9ede810ed7f766cc4138b16054bc0c18a/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 69cbb563a1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- fix alphabetical ordering
- put one module per line
- add comment explaining why options are enabled
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 5c20804afa)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Lots of people are using broken text editors that 1. do not naturally
terminate text files with a final \n as is customary in UNIX text files,
and 2. do not respect our .editorconfig settings, which explicitly
require adding that final newline. See this nice summary of what a text
file is (with references to applicable standards):
https://stackoverflow.com/questions/12916352/shell-script-read-missing-last-line/12916758#12916758
So, it is not surprising that read does not read the last "line" of a
file, when said "line" does not end with a newline, because it is thus
not really a line.
Even though we do mandate actual text files, let's be a little bit lax
in this respect, because people may write packages, and their hash
files, in a br2-external tree, and they may not have our .editorconfig
in the directory heierarchy (e.g. if buildroot is a submodule of their
br2-external tree, or whatever).
mapfile does not suffer from this limitation, though, and correctly
reads all lines from a file, even the final line-that-is-not-a-line.
mapfile was introduced in bash 4.0, released on 2009-01-20, more than
15 years ago. Debian squeeze, released in 2011 already had bash 4.1.
Those are really ancient. So, it means we can indeed expect bash
version 4.0 or later; which means mapfile is available.
"It should be fine!"
Fixes: #15976
Reported-by: masonwardle@gmail.com
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit ac2e6b3927)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
According to https://spdx.org/licenses/, the correct license code for
the "Clarified Artistic License" is ClArtistic.
The only other package in Buildroot containing code under this license
is google-breakpad, and it is already using the ClArtistic SPDX code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 2ca698051c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
`b4` is a commandline tool to make patch-based development easier[1]. It
is primarily used for Linux kernel development, but can be configured to
support any project that has a public-inbox endpoint. Buildroot has a
public-inbox mirror at "https://lore.kernel.org/buildroot/".
We configure some basic settings that tell `b4` where to send patches
and how to use get-developers.
[1] https://b4.docs.kernel.org/en/latest/
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 322213e131)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
User may get confused when they see the current hint, and take that as
the proper replacement, while we're only reporting the stem of the
variable name:
.../foo.mk:16: possible typo: BLA -> *FOO*
There is usually no easy way to actually suggest the proper variable
name, though, so let's make it a little bit more obvious that we meant
the variable was improperly prefixed:
.../foo.mk:16: possible typo, variable not properly prefixed: BLA -> *FOO_XXX*
And while at it, throw in the URL to the corresponding manual entry.
Adapt the test accordingly.
Reported-by: "Frager, Neal" <neal.frager@amd.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@datacom.com.br>
Reviewed-by: Neal Frager <neal.frager@amd.com>
[Arnout: also update new test, scoped -> prefixed]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 5836b79762)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, when a package defines an unprefixed variable, but its value
contains a properly prefixed expansion (or even just the name of a
variable), there is not error reported (e.g. with the recently fixed
composer issue):
BASE_SITE = https://getcomposer.org/download/$(COMPOSER_VERSION)/composer.phar
The reason is that he check is done on the whole line, rather than on
the variable that is being set.
We fix that by really looking at the variable we found, instead of
looking in the whole line.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@datacom.com.br>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit b0964df557)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts (partial) commit
e39ad96136, and
26642e4cc0, but also fixed additional
sites where the !BR2_RISCV_32 dependency is no longer needed, thanks
to the recently added
0001-src-xshmfence_futex.h-fix-build-on-32-bit-architectu.patch in
xlib_libxshmfence.
Signed-off-by: Thomas Devoogdt <thomas@devoogdt.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit f30da3dc21)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There was an error in the pkg-cmake infra file regarding the selection
of the ASM compiler. Now that this has been fixed, overwriting the
ASM compiler selection is no longer necessary.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 6384744780)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CMAKE_ASM_COMPILER is supposed to point to a compiler wrapper (i.e.
gcc), _not_ to as directly. If it is not set, it will use the value of
CMAKE_C_COMPILER. That's exactly what we want, so there is no need to
set CMAKE_ASM_COMPILER at all.
For target, we don't set CMAKE_ASM_COMPILER either.
Setting CMAKE_ASM_COMPILER leads to build failures for any package that
actually tries to build .S files for the host - like llvm. This is why
llvm has an override for it.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 22af5f2939)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To give us a chance to catch runtime issues (such as missing
dependencies) more easily, add a test that writes a sample PDF file,
read it back and verify the text that was read.
Like similar packages that lead to a big
rootfs (e.g. python-botocore), this test requires a separate ext2
rootfs to avoid filling the default amount of RAM available
entirely (which would cause missing files from the root filesystem and
in turn, test failures).
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 115e9493b8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the mandatory dependency of MuPDF on X.org, we can also drop
this dependency from python-pymupdf.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit edfa6f2978)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It turns out that python-pymupdf doesn't require zlib directly, but it
does require the zlib python module.
This fixes the following runtime error:
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python3.11/site-packages/fitz/__init__.py", line 22, in <module>
File "/usr/lib/python3.11/site-packages/fitz/fitz.py", line 3402, in <module>
File "/usr/lib/python3.11/gzip.py", line 9, in <module>
ModuleNotFoundError: No module named 'zlib'
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ba6baa019b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The X11 support in mupdf is actually optional, and it does require
libXext in addition to libX11, so adjust the packaging accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 2c0d7b72c0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that MUPDF_CFLAGS and MUPDF_LDFLAGS are just TARGET_CFLAGS and
TARGET_LDFLAGS, drop them.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 90f0a48467)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default mupdf generates static libraries, shared libraries must be
enabled explicitely.
Also, when building shared libraries, mupdf's Makefile properly passes
-fPIC, so adding it manually to MUPDF_CFLAGS is not needed.
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 401162d4a9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This variable might have been needed in the very distant past to help
mupdf find libraries, but mupdf's Makefile now properly uses
pkg-config to find the 5 libraries freetype2, gumbo, harfbuzz, libjpeg
and zlib, so our code has become redundant: drop it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit f7deaa1330)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The build of gcc with Fortran support is broken on gcc 12.x and gcc
13.x, it fails with:
../../../libgfortran/generated/bessel_r8.c: In function 'bessel_yn_r8':
../../../libgfortran/generated/bessel_r8.c:178:1: internal compiler error: in gen_reg_rtx, at emit-rtl.cc:1167
This issue has been fixed in gcc 14.x, which builds a Microblaze
Fortran-capable toolchain successfully.
Since we're not really interested in figuring out the commit that
fixed the problem, let's simply disallow the selection of Fortran with
gcc12/13 on Microblaze.
Fixes:
http://autobuild.buildroot.net/results/5b4eee1d9b119c9f923f9518618f45a6482ddc85/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
(cherry picked from commit 41f2567618)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 809fdb3a7a ("package/gdb:
remove gdb 10.x") and
030497be18 ("package/gdb: remove support
for GDB 11.x"), we forgot to drop the no longer needed hashes from
gdb.hash. Let's do this now.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
(cherry picked from commit 538a99a33a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds a patch, which is already in Debian, fixing the build
with gcc 14.x:
/home/autobuild/autobuild/instance-7/output-1/build/host-cdrkit-1.1.11/genisoimage/genisoimage.c:1509:17: error: implicit declaration of function 'parse_checksum_algo' [-Wimplicit-function-declaration]
1509 | if (parse_checksum_algo(optarg, &checksum_algo_iso))
| ^~~~~~~~~~~~~~~~~~~
make[3]: *** [genisoimage/CMakeFiles/genisoimage.dir/build.make:76: genisoimage/CMakeFiles/genisoimage.dir/genisoimage.o] Error 1
Fixes:
http://autobuild.buildroot.net/results/a9cca8da22774ecafdbb382697aae71f78e348f4/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 0a0de4d86c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cdrkit.org no longer works, and there is no obvious homepage for this
dead project. Use the Wikipedia page as a replacement.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit aa549fb95f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
similar to previous problems with nios2 and not-available atomic ints
the build for Boost.Atomics also fails for ARC Targets which don't
have the ATOMICS_EXT flag set.
according to [0] "Boost.Atomic has a hard requirement of the native
atomic operations on bytes". The same tests mentioned there fail for
ARC without the atomic extension.
Disable BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS for BR2_arc
without BR2_ARC_ATOMIC_EXT.
Fixes:
http://autobuild.buildroot.net/results/4ca54a85672d7b9328b1909b457e548c6032a493
[0] https://github.com/boostorg/atomic/issues/42#issuecomment-734130348
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
[Arnout: add to BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS
instead of updating all packages]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit ad71b415c1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The build logic in source/cmake/FindNeon.cmake caused the x265 build
system to always think that the CPU supports neon: it was looking in
/proc/cpuinfo, which of course is wrong when cross-compilation, but
then the sequence of grep was interacting badly with CMake, causing
the build system to always conclude that the CPU supports NEON.
This causes runtime issues on ARMv6.
Setting -DCROSS_COMPILE_ARM=1 fixes this, as it tells the x265 build
system we are cross-compiling and it skips its bogus NEON check. So
for ARMv6, we pass -DCROSS_COMPILE_ARM=1.
But then, we still want NEON for ARMv7 processors with NEON, so this
commit adds a patch that allows to explicitly specify whether the CPU
supports NEON, in the -DCROSS_COMPILE_ARM=1 case, and we use this
option when BR2_ARM_CPU_HAS_NEON.
For those wondering why -DCROSS_COMPILE_ARM=1 is not passed for all
ARM platforms: it's because from the perspective of x265, only ARM >=
v6 is ARM: it has assembly code that needs at least ARMv6. Earlier ARM
platforms are not detected as ARM by the x265 build logic, and
therefore fallback on generic code.
This has been build-tested on:
- ARMv5: generic code is used, no assembly
- ARMv6: assembly code is used, but not with NEON support
- ARMv7 with NEON: assembly code is used, with NEON support
Reported-by: David Barbion <davidb@230ruedubac.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 1fbd26f831)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As we're about to do some other fixes in x265 ARM build, let's replace
the patch fixing gcc option by:
- A patch generated by git format-patch now that x265 upstream uses
Git
- Is re-submitted upstream
- Only drops the flags, and does not add bogus ARM architecture
aliases that don't exist in the CMake world.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 9d62687d00)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
GNU Octave supports the --with-sndfile configure option since v4.0.0.
For reference, commit 40ea68b4b2 "package/octave: new package"
introduced the package at v7.1.0.
This commits adds this optional support.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a5ce48fe45)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This allows uvw to be again in sync with the libuv package, following
the bump of libuv to v1.48 in commit
bd2f99246c ("package/libuv: security
bump to version 1.48")
The hash of the license file has changed due to a copyright year
update.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c54134bf69)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When build host has a many CPUs (more that 20) and GNU Make 4.4
(included for example in Fedora 40), fwts can randomly fail to build.
This commit adds a package patch to fix the issue.
Fixes:
mv: cannot stat 'dtcompilerparser.tab.c': No such file or directory
mv: cannot stat 'prparser.tab.c': No such file or directory
See also:
https://github.com/fwts/fwts/issues/7
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit f6d9fa3692)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This issue was introduced back in 2009 with commit
e11fe847b2 that created the generic
package infrastructure.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit bd0d5498ea)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When BR2_SHARED_LIBS=y (shared libraries only) and BR2_PIC_PIE=y
(Build code with PIC/PIE), the toolchain-wrapper will try to enable
position-independent code/executables. See [1]. This configuration
is a common default.
Xvisor was likely tested only with RISC-V gcc from [2], which will
not enable PIE by default. Since Xvisor is a Type 1 hypervisor, it
needs the same kind of special treatment as U-Boot or Kernel.
This commit adds a patch to explicitly force static linking and
disable PIE for RISC-V architecture.
[1] https://git.buildroot.org/buildroot/tree/toolchain/toolchain-wrapper.c?h=2023.05.1#n392
[2] https://github.com/riscv-collab/riscv-gnu-toolchain
Signed-off-by: Julien Olivain <ju.o@free.fr>
[Arnout: renumber patch]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 28925c6c86)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Integrate a patch, which was submitted upstream, to work-around an
issue with the SPARC kernel headers. The kernel headers have been
fixed in the upstream kernel (in the to-be-released 6.10 kernel), but
we need a workaround for the older toolchains, until we believe 6.10
is "old" enough to be able to drop the workaround.
Fixes:
http://autobuild.buildroot.net/results/272c464ed4f9392535fa3b7613218dbd03acf901/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b162aab7c6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Although the asciidoc toolchain accepts any number of ~ to delimit a
listing block (i.e. a code block), it is actually specified to be
exactly four, i.e. ~~~~. Currently, a mix of diffrent numbers of ~ are
being used - sometimes even a different number at the beginning and at
the end of the block.
Normalize this to always use exactly four ~ for the delimiter.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 447fa1fca4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently the text for each package infra that mentions the usage of
variables already provided by the generic infra diverge from each other:
- some (golang, kconfig, python) add a cross-referece to the generic
infra chapter;
- kconfig does not list any example;
- some mention _LICENSE as an example, others don't;
- some (cargo, golang, python) add an 'etc.' at the end of the examples,
giving the idea that can be more symbols provided by the generic
infra than the ones listed;
- most have the text 'works by defining a number of variables before
calling the +<macro-name>+ macro', except golang and kconfig;
- some actually list 'A few additional variables' but keep using some
old reference as 'An additional variable';
- some say 'First, all the package metadata' and other only 'All the
package metadata';
- most mention _SUBDIR as an example of variable supported by the
generic infra, even the generic infra manual not mentioning it.
Improve the correctness for the manual by standardizing the text among
the package infras:
- use the same text "All the package metadata information variables that
exist in the generic package infrastructure also exist in the
<name> infrastructure:" for all of them;
- add the cross-reference for all of them;
- remove the examples of variables inherited from the generic infra -
this also solves the _SUBDIR problem, there no longer is any reference
to _SUBDIR;
- wrap the modified text at 80 columns;
- add "macro" to golang and luarocks infra;
- use "A few additional variables" for qmake and waf.
At same time, add a missing format on golang manual for
BR2_PACKAGE_HOST_GO_HOST_ARCH_SUPPORTS.
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Arnout:
- remove the examples;
- add "the" where "macro" was added;
- rewrite the preceding paragraphs for kconfig to make it more
consistent.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 4286c89f9d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Each linux tool uses a fragment of a .mk file, named, for instance:
package/linux-tools/linux-tool-cpupower.mk.in
So currently check-package does not check these files.
Add the support in check-package script.
At the same time, factor out a function to derive package prefix from
the filename being checked, so the fix (calling os.path.splitext twice)
can be applied in a single place.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Arnout: add docstring and explain double splitext to
get_package_prefix_from_filename]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit ccc12c0f24)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following musl build failure with gcc 14:
daemon/old_main.c: In function 'old_main':
daemon/old_main.c:56:11: error: implicit declaration of function 'strcmp' [-Wimplicit-function-declaration]
56 | if(!strcmp((which_mouse->opt_dev),"-")) fd=0; /* use stdin */
| ^~~~~~
daemon/old_main.c:35:1: note: include '<string.h>' or provide a declaration of 'strcmp'
34 | #include "headers/gpmInt.h" /* daemon internals */
+++ |+#include <string.h>
35 |
While at it, add Upstream tags to other patches
Fixes:
- http://autobuild.buildroot.org/results/3192740863d57e72e90e622683e7b9fcc057fa8b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 50b18ed68c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, gpm fails to build with output:
Applying 0003-src-Makefile.in-Really-install-unversioned-solibrary.patch using patch:
patching file src/Makefile.in
Hunk #1 FAILED at 115.
1 out of 1 hunk FAILED -- saving rejects to file src/Makefile.in.rej
This commit refreshes the package patch on the current package version.
While we're at it, change to use a proper Upstream: tag and remove from
.checkpackageignore.
Fixes: 8f88a644ed
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit d47ae17adf)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When packaging data_files in a wheel, those files shall have the destination
path expressed as relative to the wheel installation.
The reason for that is the wheel installation shall be contained inside a
specific folder and/or in site-packages.
When building the wheel file by the bdist_wheel command, python will package
files with absolute paths as python files ending up installing them in
site-packages.
Fixes:
http://autobuild.buildroot.net/results/36ac5278d19195a21c3d02d087965e08f49228ef
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Tested-by: Fiona Klute <fiona.klute+wiwa@gmx.de>
[Arnout: add Upstream tag to the patch]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit c90b87156d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When installing a wheel in pep517 compatibility mode, the pyinstaller.py is
invoked with the --data parameter which point to the directory in which data
files should be installed.
Actually the --data parameter points to the /usr subdirectory which is indeed
wrong cause it shall point to the root directory where the wheel will be
installed.
This fixes the problem of having configuration files installed in /usr/etc
instead of /etc.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Tested-by: Fiona Klute <fiona.klute+wiwa@gmx.de>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 98f452f974)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since its inception in 146498d13c (package/bcc: new package), not all
the dependencies of bcc are mirrored in the comment to be displayed when
those dependencies are not met.
Fix that by adding the missing pieces:
- wchar,
- threads
- dynamic libs,
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Jugurtha BELKALEM <jugurtha.belkalem@smile.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 76051e6531)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes http://autobuild.buildroot.net/results/1d5804974153f96e80f5200793ec8cd12c9fa18a/
GCC 14 complains if the arguments to calloc (nmemb, size) are swapped
around, causing a build failure as dump1090 builds with -Werror:
net_io.c:107:34: error: 'calloc' sizes specified with 'sizeof' in the earlier argument and not in the later argument [-Werror=calloc-transposed-args]
107 | if (!(service = calloc(sizeof(*service), 1))) {
Add a patch from an upstream pull request to fix that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit fd358b97c0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commits 3988f2d923 and
0d91281d7b added hashes for the chromebook
defconfigs, but forgot to remove the exception from .checkpackageignore.
Regenerate .checkpackageignore, which removes those exceptions.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 5e36efd7ac)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch adds .hash files for Arm trusted firmware, Linux, Linux headers
and U-Boot and then enables BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we
can now drop the defconfig from .checkpackageignore.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 751228436a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
qt5webkit build currently breaks on the following error:
XSLStyleSheetLibxslt.cpp:148:129: error: invalid conversion from ‘void (*)(void*, xmlError*)’ {aka ‘void (*)(void*, _xmlError*)’} to ‘xmlStructuredErrorFunc’ {aka ‘void (*)(void*, const _xmlError*)’} [-fpermissive]
148 | XMLDocumentParserScope scope(cachedResourceLoader(), XSLTProcessor::genericErrorFunc, XSLTProcessor::parseErrorFunc, console);
| ^
| |
| void (*)(void*, xmlError*) {aka void (*)(void*, _xmlError*)}
This error is due to an API update in libxml2, enforcing const on more
struct in version 2.12.0 (see [1]). Buildroot now tracks v2.12.5.
Upstream Webkit project has already issued the corresponding fix ([2]),
which updates corresponding internal prototypes depending on libxml2
version, but the qt5webkit version tracked in buildroot does not integrate
the corresponding Webkit version.
Fix this build issue by bringing the upstream patch "as is" from Webkit
No autobuilder references because this build error was hidden by
another build error fixed in a previous patch.
[1] https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.12.0
[2] https://github.com/WebKit/WebKit/commit/1bad176b2496579d760852c80cff3ad9fb7c3a4b
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit e24a117388)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
qt5webkit build currently fails with the following error:
[...] parser.rb:587:in `block in parseSequence': undefined method `=~' for an instance of Annotation (NoMethodError)
from <internal:kernel>:187:in `loop'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:586:in `parseSequence'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:654:in `block in parseSequence'
from <internal:kernel>:187:in `loop'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:586:in `parseSequence'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:814:in `parseData'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:818:in `parse'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:780:in `block in parseSequence'
from <internal:kernel>:187:in `loop'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:586:in `parseSequence'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:625:in `block in parseSequence'
from <internal:kernel>:187:in `loop'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:586:in `parseSequence'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:814:in `parseData'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:818:in `parse'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/generate_offset_extractor.rb:68:in `<main>'
This issue is due to =~ being marked as deprecated since a few Ruby
versions, and finally removed in 3.2.0 [1]. This now breaks the build since
buildroot has moved to Ruby v3.3.0.
The corresponding fix has already been issued in upstream Webkit project
[2], but qt5webkit version tracked in buildroot does not have the
corresponding webkit version pulled. Fix this build error by bringing the upstream
patch. The patch is slightly modified (exclude part about Changelog file,
which is absent from qt5webkit)
Fixes:
http://autobuild.buildroot.net/results/21397b110fe02e5711ecb1d35be2108221751b0a/
[1] https://www.ruby-lang.org/en/news/2022/12/25/ruby-3-2-0-released/
[2] https://github.com/WebKit/WebKit/commit/c7d19a492d97f9282a546831beb918e03315f6ef
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 51ef6691ac)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, qt5webkit fails to build with output:
Applying 0004-Remove-invalid-g_object-declarations-to-fix-build-wi.patch using patch:
patching file Source/WTF/wtf/glib/GRefPtr.h
Hunk #1 FAILED at 29.
1 out of 1 hunk FAILED -- saving rejects to file Source/WTF/wtf/glib/GRefPtr.h.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 6d0cce7dab)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since there are no more packages using FTP-hosted files, we can drop
the --passive-ftp option from genrandconfig, as it would cause
problems on systems that use wget2.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 881a8f1346)
[Peter: slightly reword commit message, no curl backend here]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We're going to add hashes soon, so we'll need to have that directory
populated with hash files, and it would then be a bit confusing to not
have the patch file in the patches directory...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 552a8cec8c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Change download location as the new version is not available at the
old location.
Remove already upstreamed patch.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 0deb8c4c5d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Backport a patch from upstream that adds the magic number for the
bcachefs superblock. Otherwise, systemd 254.13 fails to compile with
the latest kernel versions.
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit f3c1f667dc)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following error when compiled against GCC 14.x:
tftp.c: In function ‘tftp_sendfile’:
tftp.c:88:5: error: implicit declaration of function ‘bsd_signal’; did
you mean ‘ssignal’? [-Wimplicit-function-declaration]
88 | bsd_signal(SIGALRM, timer);
| ^~~~~~~~~~
| ssignal
tftp.c:88:5: warning: nested extern declaration of ‘bsd_signal’ [-Wnested-externs]
main.c: In function ‘main’:
main.c:308:5: error: implicit declaration of function ‘bsd_signal’;
did you mean ‘ssignal’? [-Wimplicit-function-declaration]
308 | bsd_signal(SIGINT, intr);
| ^~~~~~~~~~
| ssignal
main.c:308:5: warning: nested extern declaration of ‘bsd_signal’ [-Wnested-externs]
Remove an upstreamed patch.
tftpd/tftpd.c has changed, hence, change its checksum.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit ee2b57e0c9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ENABLE_SYSTEMD option has been removed from ubus by upstream commit:
96ab0b3032f5 ubusd: remove systemd socket activation support
From a Buildroot perspective, this means that this systemd socket
activation feature no longer exists since Buildroot commit
130be80d34 ("ubus: bump version"), as we
bumped ubus from 259450f414d8c9ee41896e8e6d6bc57ec00e2b63 to
34c6e818e431cc53478a0f7c7c1eca07d194d692 in this commit, and the
96ab0b3032f5 ("ubusd: remove systemd socket activation support")
commit is in this range. It was therefore dropped upstream in 2016,
and in Buildroot in 2017.
Signed-off-by: Jan Havran <havran.jan@email.cz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 60c8807c69)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The package compilation for the raspberrypi3_qt5we_defconfig raises the
following error:
In file included from buildroot/output/build/snappy-1.1.10/snappy.cc:29:
buildroot/output/build/snappy-1.2.1/snappy-internal.h: In function ‘snappy::internal::V128 snappy::internal::V128_Shuffle(V128, V128)’:
buildroot/output/build/snappy-1.2.1/snappy-internal.h:109:10: error: ‘vqtbl1q_u8’ was not declared in this scope; did you mean ‘vtbl1_u8’?
109 | return vqtbl1q_u8(input, shuffle_mask);
| ^~~~~~~~~~
| vtbl1_u8
make[4]: *** [CMakeFiles/snappy.dir/build.make:118: CMakeFiles/snappy.dir/snappy.cc.o] Error 1
The issue was raised by commit b3fb0b5b4b076 ("Enable vector byte
shuffle optimizations on ARM NEON") contained in version 1.1.10.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 01f35f8875)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit
7efd75867c ("configs/ti_am64x_sk_defconfig:
update U-Boot to v2024.04") updated U-Boot and the ti-k3-r5-loader to
2024.04, but did not update the hash files in board/ti/am62x-sk/. It
ended up working for now, because the official versions of boot/uboot
and boot/ti-k3-r5-loader/ also use 2024.04 and therefore have this
hash, but it would have started failing as soon as boot/uboot and/or
boot/ti-k3-r5-loader official version were updated.
Signed-off-by: Gero Schwäricke <gero.schwaericke@grandcentrix.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 5654eca137)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit
cc2910a7db ("configs/ti_am62x_sk_defconfig:
update U-Boot to v2024.04") updated U-Boot and the ti-k3-r5-loader to
2024.04, but did not update the hash files in board/ti/am62x-sk/. It
ended up working for now, because the official versions of boot/uboot
and boot/ti-k3-r5-loader/ also use 2024.04 and therefore have this
hash, but it would have started failing as soon as boot/uboot and/or
boot/ti-k3-r5-loader official version were updated.
Signed-off-by: Gero Schwäricke <gero.schwaericke@grandcentrix.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3da51c9180)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add missing stdio.h include. Without this includes, the build fails
with the following error under GCC 14.x:
../../../com32/lib/syslinux/debug.c: In function ‘syslinux_debug’:
../../../com32/lib/syslinux/debug.c:91:5: error: implicit declaration of function ‘printf’ [-Wimplicit-function-declaration]
91 | printf("Dynamic debug unavailable\n");
Signed-off-by: Lance Fredrickson <lancethepants@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3b9d62dac5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
GNU Octave supports the --with-openssl configure option since v4.0.0.
For reference, commit 40ea68b4b2 "package/octave: new package"
introduced the package at v7.1.0.
This commits adds this optional support.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 0e2c2810dc)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 8f88a644ed "support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0" reduced the fuzz factor.
Due to this change, exim fails to build with output:
Applying 0004-exim_lock-fix-lstat-related-build-errors.patch using patch:
patching file src/exim_lock.c
Hunk #1 FAILED at 13.
Hunk #2 succeeded at 27 (offset 1 line).
1 out of 2 hunks FAILED -- saving rejects to file src/exim_lock.c.rej
This commit rebases the package patches on the current package version
when needed.
Fixes:
http://autobuild.buildroot.net/results/ff27d5ebd7f24ac8cb236b83c67c2c75255e51c6/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Yann E. MORIN <yann.morin@orange.com>
Tested-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 20973140c1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Mathieu privately informed me that he no longer has access to the
TS4900 board, he is therefore unable to maintain this board moving
forward. Let's drop his entry from the DEVELOPERS file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 39d23ce823)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Import a patch that has been backported by upstream to the 2.44 release
branch that fixes the build when the target is an ARM processor that
supports NEON instructions.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 8502ac71aa)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit e7f124e9b6 (package/openssh: disable async-signal-unsafe code in
sshsigdie()) add a patch for CVE-2024-6387 but forgot to add an _IGNORE_CVES
entry. Fix that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The "msd" (mass storage device) firmware files in 2021.07.01 don't
work with some newer CM4 based devices, the one I had issues with is a
RevPi Connect 4. Updating fixes the issue. Mass storage device mode is
required to flash the eMMC of CM4 devices.
Signed-off-by: Fiona Klute <fiona.klute+wiwa@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit fbd9a3f311)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the stmmac driver is configured as a module in the defconfig, which
means that the network functionality is not available until the driver module
is manually inserted.
Use extra config fragment to integrate it directly into the kernel, ensuring that network
functionality is available immediately upon boot.
Signed-off-by: Aleksandr Makarov <aleksandr.o.makarov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 54c82a2375)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit c366ecb95e.
While the change is correct, it causes quite some fallout from packages
using the ENGINE_* API functions without selecting
BR2_PACKAGE_LIBOPENSSL_ENGINES, so drop it from the stable branch.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
commit d9e6d2d081 "configs/visionfive2: update kernel to upstream
6.8.2" removed the config directive:
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
but forgot to add:
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_8=y
It was most likely generated with a "make savedefconfig", while Linux
kernel v6.8 was the default at that time. After commit aa70c331a2
"linux: bump latest version to 6.9", the defconfig failed to build
with error:
Incorrect selection of kernel headers: expected 6.9.x, got 6.8.x
This commit fixes the defconfig by adding back the kernel custom header
version.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7271150175
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 1da5466bab)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This introduces the default issue template, to help users provide issues
that are meaningful, and that will help reproduce the issue.
If needed, we can add more templates in the future.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Arnout:
- add link to mailing list;
- rephrase "pristine Buildroot";
- add a checklist item for "I'm using latest commit";
- add a checklist item for "make clean; make";
- add formal items for Buildroot commit sha1 and distro.]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 32aacc4737)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream has changed the archive for the 2.0.7 release since we bumped
in c1f820bd88 (package/daq: bump version to 2.0.7). Comparing the old
archive as it is on s.b.o. with the one currently available on upstream,
gives a few deltas, mostly;
- (C) years changed in comments
- version string changed from 2.0.6 to 2.0.7
- changes (that look legit) to autostuff
- a file dropped (Visual Studio related)
Of course, that means the hashes changed, and no longer match what we
have.
Downloading the file manually and letting wget set the timestamp on it,
reveals the archive is dated 2022-06-08T13:51:59. So, for more than two
years now, we've been relying on the archive we cached on s.b.o.
So, we can't just change the hashes to the new ones, nor can we replace
the archive on s.b.o.
Instead, we use the same trick as was used in c617ebbc97
(package/python-*: fix hashes for cargo-vendored python packages): we
use the actual, real URL with a query parameter as the _SITE, and we set
_SOURCE to a different name so as not to conflict with the previous
archive.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Yoann Congal <yoann.congal@smile.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 9e00cceb60)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The commit fixes the following compilation error:
i686-buildroot-linux-gnu-gcc.br_real: error: unrecognized command-line option ‘-fforce-mem’
From GCC 4.3 release notes [1]:
The -fforce-mem option has been removed because it has had no effect
in the last few GCC releases.
[1] https://gcc.gnu.org/gcc-4.3/changes.html
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 89ba9c5a0b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, libmad fails to build with output:
Applying mips-gcc4.4.diff using series:
patching file fixed.h
Hunk #1 FAILED at 297.
1 out of 1 hunk FAILED -- saving rejects to file fixed.h.rej
The package applied the patches in two steps, first the local ones and
then the official ones downloaded from the repository. The commit fixes
the issue by reversing the order of patch application steps.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit b21184a877)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even though the "no-engine" option effectively disables the compilation
of the engine, it still creates the installation directory, which ends up
being empty. For this reason, the patch does not remove the hook for
removing the directory if the BR2_PACKAGE_LIBOPENSSL_ENGINES option is
not enabled.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 623d3bbe43)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With version 3.2.0 of OpenSSL, the "no-apps" configuration option was
added, which does not build apps, e.g. the openssl program. This is
handy for minimization. This option also disables tests.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit e0bdc5ddb8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch expresses the same condition in positive logic, consistent
with what has been coded in other parts of the module and generally
in Buildroot.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit c2761b5266)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The bump to version 3.0.9 in commit 3c66f65a6a (package/libopenssl:
bump version to 3.0.9), and all subsequent updates, forgot to change
the directory name, which remained that of version 1.1. The patch
fixes the directory name to be consistent with the version.
In the case the library was not built with engine support, this resulted
in the presence of files in the root file system that should have been
removed.
Fixes: 3c66f65a6a
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 7f9291bfe4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit f77d698f83 changed apply-patches to
use $TAR instead of `tar`, but did not define a fallback if $TAR is not
defined. This results in an error when calling apply-patches.sh from
outside Buildroot's Makefile. Our team uses this script to setup local
checkouts of Buildroot package's with patches for development.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 118c824b56)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From the release notes:
================================================================================
Redis 7.2.5 Released Thu 16 May 2024 12:00:00 IST
================================================================================
Upgrade urgency MODERATE: Program an upgrade of the server, but it's not urgent.
Bug fixes
=========
* A single shard cluster leaves failed replicas in CLUSTER SLOTS instead of removing them (#12824)
* Crash in LSET command when replacing small items and exceeding 4GB (#12955)
* Blocking commands timeout is reset due to re-processing command (#13004)
* Conversion of numbers in Lua args to redis args can fail. Bug introduced in 7.2.0 (#13115)
Bug fixes in CLI tools
======================
* redis-cli: --count (for --scan, --bigkeys, etc) was ignored unless --pattern was also used (#13092)
* redis-check-aof: incorrectly considering data in manifest format as MP-AOF (#12958)
Signed-off-by: Titouan Christophe <titouanchristophe@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 61a7edc0c8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
GLIBC-SA-2024-0004:
ISO-2022-CN-EXT: fix out-of-bound writes when writing escape
sequence (CVE-2024-2961)
GLIBC-SA-2024-0005:
nscd: Stack-based buffer overflow in netgroup cache (CVE-2024-33599)
GLIBC-SA-2024-0006:
nscd: Null pointer crash after notfound response (CVE-2024-33600)
GLIBC-SA-2024-0007:
nscd: netgroup cache may terminate daemon on memory allocation
failure (CVE-2024-33601)
GLIBC-SA-2024-0008:
nscd: netgroup cache assumes NSS callback uses in-buffer strings
(CVE-2024-33602)
In addition, the following bugs are fixed:
[19622] network: Support aliasing with struct sockaddr
[30701] time: getutxent misbehaves on 32-bit x86 when _TIME_BITS=64
[30994] REP MOVSB performance suffers from page aliasing on Zen 4
[31339] libc: arm32 loader crash after cleanup in 2.36
[31325] mips: clone3 is wrong for o32
[31335] math: Compile glibc with -march=x86-64-v3 should disable FMA4
multi-arch version
[31402] libc: clone (NULL, NULL, ...) clobbers %r7 register on
s390{,x}
[31479] libc: Missing #include <sys/rseq.h> in sched_getcpu.c may
result in a loss of rseq acceleration
[31316] build: Fails test misc/tst-dirname "Didn't expect signal from
child: got `Illegal instruction'" on non SSE CPUs
[31371] x86-64: APX and Tile registers aren't preserved in ld.so
trampoline
[31372] dynamic-link: _dl_tlsdesc_dynamic doesn't preserve all caller-
saved registers
[31429] build: Glibc failed to build with -march=x86-64-v3
[31501] dynamic-link: _dl_tlsdesc_dynamic_xsavec may clobber %rbx
[31640] dynamic-link: POWER10 ld.so crashes in
elf_machine_load_address with GCC 14
[31676] Configuring with CC="gcc -march=x86-64-v3"
--with-rtld-early-cflags=-march=x86-64 results in linker failure
[31677] nscd: nscd: netgroup cache: invalid memcpy under low
memory/storage conditions
[31678] nscd: nscd: Null pointer dereferences after failed netgroup
cache insertion
[31679] nscd: nscd: netgroup cache may terminate daemon on memory
allocation failure
[31680] nscd: nscd: netgroup cache assumes NSS callback uses in-buffer
strings
[31686] dynamic-link: Stack-based buffer overflow in
parse_tunables_string
[31719] dynamic-link: --enable-hardcoded-path-in-tests doesn't work
with -Wl,--enable-new-dtags
[31782] Test build failure with recent GCC trunk
(x86/tst-cpu-features-supports.c:69:3: error: parameter to builtin
not valid: avx5124fmaps)
[31798] pidfd_getpid.c is miscompiled by GCC 6.4
[31867] build: "CPU ISA level is lower than required" on SSE2-free
CPUs
[31883] build: ISA level support configure check relies on bashism /
is otherwise broken for arithmetic
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 7bfea9372f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with gcc 14:
In file included from /home/autobuild/autobuild/instance-6/output-1/build/avro-c-1.11.3/src/avro/legacy.h:33,
from /home/autobuild/autobuild/instance-6/output-1/build/avro-c-1.11.3/src/avro/io.h:31,
from /home/autobuild/autobuild/instance-6/output-1/build/avro-c-1.11.3/src/avro/consumer.h:30,
from /home/autobuild/autobuild/instance-6/output-1/build/avro-c-1.11.3/src/avro.h:28,
from /home/autobuild/autobuild/instance-6/output-1/build/avro-c-1.11.3/examples/quickstop.c:18:
/home/autobuild/autobuild/instance-6/output-1/build/avro-c-1.11.3/examples/quickstop.c: In function 'print_person':
/home/autobuild/autobuild/instance-6/output-1/build/avro-c-1.11.3/examples/quickstop.c:123:61: error: passing argument 3 of 'first_value.iface->get_string' from incompatible pointer type [-Wincompatible-pointer-types]
123 | avro_value_get_string(&first_value, &p, &size);
| ^~
| |
| int32_t ** {aka int **}
Fixes:
- http://autobuild.buildroot.org/results/fdbc6a888ba8bb51f4e076a450919477d1378eb3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit b39dfdde33)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Instead of downloading a different version of the kernel for the headers as
for the runtime kernel itself, use the same one. By doing so, we now need
to add the hash file for linux-headers.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit a4d38ef61c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2024-06-16 12:30:44 +02:00
479 changed files with 7043 additions and 2277 deletions
conftest.c:73:27: note: include '<stdio.h>' or provide a declaration of 'printf'
resulting in the following static build failure:
/home/autobuild/autobuild/instance-7/output-1/host/lib/gcc/sh4-buildroot-linux-musl/14.1.0/../../../../sh4-buildroot-linux-musl/bin/ld: /home/autobuild/autobuild/instance-7/output-1/host/sh4-buildroot-linux-musl/sysroot/lib/libc.a(libc.o):(.bss.__progname+0x0): multiple definition of `__progname'; autossh.o:(.bss+0x120): first defined here
AC_CACHE_CHECK([for build system executable suffix],
gmp_cv_prog_exeext_for_build,
[cat >conftest.c <<EOF
+#include <stdlib.h>
int
main ()
{
--
2.45.2
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Peter Korsgaard