Update for 2022.11.1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
fs/erofs: enable support for reproducible build
2023-01-18 09:04:16 +01:00 · 2023-01-17 10:25:59 +01:00 · 2023-01-17 10:24:23 +01:00 · 2023-01-17 10:24:15 +01:00 · 2023-01-16 15:52:10 +01:00 · 2023-01-16 15:44:32 +01:00
6021 changed files with 54039 additions and 84448 deletions
@@ -1,37 +0,0 @@
-root = true
-
-[*]
-charset = utf-8
-end_of_line = lf
-indent_style = space
-indent_size = 4
-tab_width = 8
-trim_trailing_whitespace = true
-insert_final_newline = true
-
-[DEVELOPERS]
-indent_style = tab
-indent_size = tab
-
-[Config*.in*]
-indent_style = tab
-indent_size = tab
-
-[linux/Config.ext.in]
-indent_style = tab
-indent_size = tab
-
-[Makefile*]
-indent_style = tab
-indent_size = tab
-
-[*.mk]
-indent_style = tab
-indent_size = tab
-
-[S{0..9}{0..9}*]
-indent_style = tab
-indent_size = tab
-
-[*.adoc]
-trim_trailing_whitespace = false
@@ -1,7 +1,7 @@
 # Configuration for Gitlab-CI.
 # Builds appear on https://gitlab.com/buildroot.org/buildroot/pipelines

-image: $CI_REGISTRY/buildroot.org/buildroot/base:20230207.1123
+image: $CI_REGISTRY/buildroot.org/buildroot/base:20220206.1756

 stages:
  - generate-gitlab-ci
@@ -10,11 +10,6 @@ stages:
 generate-gitlab-ci-yml:
  stage: generate-gitlab-ci
  script: ./support/scripts/generate-gitlab-ci-yml support/misc/gitlab-ci.yml.in > generated-gitlab-ci.yml
-  retry:
-    max: 2
-    when:
-      - runner_system_failure
-      - stuck_or_timeout_failure
  artifacts:
    when: always
    paths:
@@ -55,16 +55,6 @@ config BR2_HOST_GCC_AT_LEAST_9
 	default y if BR2_HOST_GCC_VERSION = "9"
 	select BR2_HOST_GCC_AT_LEAST_8

-config BR2_HOST_GCC_AT_LEAST_10
-	bool
-	default y if BR2_HOST_GCC_VERSION = "10"
-	select BR2_HOST_GCC_AT_LEAST_9
-
-config BR2_HOST_GCC_AT_LEAST_11
-	bool
-	default y if BR2_HOST_GCC_VERSION = "11"
-	select BR2_HOST_GCC_AT_LEAST_10
-
 # When adding new entries above, be sure to update
 # the HOSTCC_MAX_VERSION variable in the Makefile.

@@ -75,7 +65,7 @@ config BR2_NEEDS_HOST_JAVA

 # Hidden boolean selected by pre-built packages for x86, when they
 # need to run on x86-64 machines (example: pre-built external
-# toolchains, binary tools, etc.).
+# toolchains, binary tools like SAM-BA, etc.).
 config BR2_HOSTARCH_NEEDS_IA32_LIBS
 	bool

@@ -251,7 +241,7 @@ if !BR2_PRIMARY_SITE_ONLY

 config BR2_BACKUP_SITE
 	string "Backup download site"
-	default "https://sources.buildroot.net"
+	default "http://sources.buildroot.net"
 	help
 	  Backup site to download from. If this option is set then
 	  buildroot will fall back to download package sources from here
@@ -474,7 +464,7 @@ config BR2_STRIP_EXCLUDE_DIRS

 choice
 	prompt "gcc optimization level"
-	default BR2_OPTIMIZE_2
+	default BR2_OPTIMIZE_S
 	help
 	  Set the optimization level for gcc

@@ -520,7 +510,6 @@ config BR2_OPTIMIZE_2
 	  -falign-loops -falign-labels -ftree-vrp -ftree-pre. Please
 	  note the warning under -fgcse about invoking -O2 on programs
 	  that use computed gotos.
-	  This is the default.

 config BR2_OPTIMIZE_3
 	bool "optimization level 3"
@@ -549,6 +538,7 @@ config BR2_OPTIMIZE_S
 	  -falign-loops -falign-labels -freorder-blocks
 	  -freorder-blocks-and-partition -fprefetch-loop-arrays
 	  -ftree-vect-loop-version
+	  This is the default.

 config BR2_OPTIMIZE_FAST
 	bool "optimize for fast (may break packages!)"
@@ -589,7 +579,7 @@ config BR2_GOOGLE_BREAKPAD_ENABLE
 	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 # C++11
 	depends on BR2_USE_WCHAR
 	depends on BR2_TOOLCHAIN_HAS_THREADS
-	depends on BR2_TOOLCHAIN_USES_GLIBC
+	depends on (BR2_TOOLCHAIN_USES_GLIBC || BR2_TOOLCHAIN_USES_UCLIBC)
 	depends on BR2_PACKAGE_GOOGLE_BREAKPAD_ARCH_SUPPORTS
 	depends on BR2_PACKAGE_HOST_GOOGLE_BREAKPAD_ARCH_SUPPORTS
 	select BR2_PACKAGE_GOOGLE_BREAKPAD
@@ -674,12 +664,12 @@ config BR2_PACKAGE_OVERRIDE_FILE
 	  documentation for more details on this feature.

 config BR2_GLOBAL_PATCH_DIR
-	string "global patch and hash directories"
+	string "global patch directories"
 	help
 	  You may specify a space separated list of one or more
-	  directories containing global package patches and/or hashes.
-	  For a specific version <packageversion> of a specific package
-	  <packagename>, patches are looked up as follows:
+	  directories containing global package patches. For a specific
+	  version <packageversion> of a specific package <packagename>,
+	  patches are applied as follows:

 	  First, the default Buildroot patch set for the package is
 	  applied from the package's directory in Buildroot.
@@ -693,10 +683,26 @@ config BR2_GLOBAL_PATCH_DIR
 	  exists, then all *.patch files in the directory will be
 	  applied.

-	  The hash files are looked up similarly to the patches.
-
 menu "Advanced"

+config BR2_COMPILER_PARANOID_UNSAFE_PATH
+	bool "paranoid check of library/header paths"
+	default y
+	help
+	  By default, when this option is disabled, when the Buildroot
+	  cross-compiler will encounter an unsafe library or header path
+	  (such as /usr/include, or /usr/lib), the compiler will display
+	  a warning.
+
+	  By enabling this option, this warning is turned into an error,
+	  which will completely abort the build when such unsafe paths
+	  are encountered.
+
+	  Note that this mechanism is available for both the internal
+	  toolchain (through the toolchain wrapper and binutils patches)
+	  and external toolchain backends (through the toolchain
+	  wrapper).
+
 config BR2_FORCE_HOST_BUILD
 	bool "Force the building of host dependencies"
 	help
@@ -709,21 +715,6 @@ config BR2_FORCE_HOST_BUILD

 	  This option will increase build time.

-config BR2_DOWNLOAD_FORCE_CHECK_HASHES
-	bool "Force all downloads to have a valid hash"
-	help
-	  Say 'y' here to enforce downloads to have at least one valid
-	  hash (and of course, that all hashes be valid).
-
-	  By default, Buildroot checks hashes of all packages
-	  downloaded, except those for which a custom version is
-	  used.
-
-	  With this option turned on, Buildroot will check hashes of
-	  all packages, including those that use a custom version. In
-	  order to provide hashes for such packages, place additional
-	  hash files in BR2_GLOBAL_PATCH_DIR directories.
-
 config BR2_REPRODUCIBLE
 	bool "Make the build reproducible (experimental)"
 	# SOURCE_DATE_EPOCH support in toolchain-wrapper requires GCC 4.4
@@ -763,20 +754,6 @@ config BR2_PER_PACKAGE_DIRECTORIES

 endmenu

-config BR2_TIME_BITS_64
-	bool "Build Y2038-ready code"
-	depends on BR2_TOOLCHAIN_USES_GLIBC && !BR2_ARCH_IS_64
-	help
-	  This option will pass -D_TIME_BITS=64 in the compiler flags
-	  to ensure the glibc C library uses a 64-bit representation
-	  for time_t and other time types, which ensures that
-	  programs/libraries will correctly handle time past year
-	  2038.
-
-	  This option only has an effect with glibc >= 2.34, as
-	  earlier glibc versions did not have support for 64-bit
-	  time_t.
-
 comment "Security Hardening Options"

 config BR2_PIC_PIE_ARCH_SUPPORTS
@@ -953,15 +930,6 @@ config BR2_FORTIFY_SOURCE_2
 	  Also adds checks at run-time (detected buffer overflow
 	  terminates the program)

-config BR2_FORTIFY_SOURCE_3
-	bool "Extended"
-	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_12
-	help
-	  This option sets _FORTIFY_SOURCES to 3 and even more
-	  checking is added compared to level 2. Extends checks at
-	  run-time that can introduce an additional performance
-	  overhead.
-
 endchoice

 comment "Fortify Source needs a glibc toolchain and optimization"
@@ -144,500 +144,8 @@ endif

 ###############################################################################

-comment "Legacy options removed in 2024.02"
-
-config BR2_PACKAGE_MYSQL
-	bool "mysql virtual package removed"
-	select BR2_LEGACY
-	help
-	  The mysql virtual package has been removed as mariadb is the
-	  only supported mysql variant. Use the mariadb package
-	  instead.
-
-config BR2_PACKAGE_ORACLE_MYSQL
-	bool "oracle mysql removed"
-	select BR2_LEGACY
-	help
-	  Oracle mysql has been removed as the package was
-	  unmaintained. Consider using mariadb instead.
-
-config BR2_PACKAGE_STRONGSWAN_SCEP
-	bool "strongswan SCEP client tool removed"
-	select BR2_LEGACY
-	help
-	  "ipsec scepclient" tool has been removed and replaced by the
-	  pki subcommands "pki --scep" and "pki --scepca" which
-	  implement the new SCEP RFC 8894 standard that was released in
-	  September 2020 and which supports trusted "certificate
-	  renewal" based on the existing client certificate.
-
-config BR2_PACKAGE_SHADOW_UTMPX
-	bool "shadow utmpx removed"
-	select BR2_LEGACY
-	help
-	  UTMPX has been dropped by upstream.
-
-config BR2_PACKAGE_TINYMEMBENCH
-	bool "tinymembench removed"
-	select BR2_LEGACY
-	help
-	  tinymembench has been removed due to being abandoned.
-
-config BR2_PACKAGE_DAVINCI_BOOTCOUNT
-	bool "davinci-bootcount has been renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_UBOOT_BOOTCOUNT
-	help
-	  The davinci-bootcount package has been renamed to
-	  uboot-bootcount.
-
-config BR2_PACKAGE_PYTHON_CROSSBAR
-	bool "python-crossbar removed"
-	select BR2_LEGACY
-	help
-	  python-crossbar has been removed. The current package has
-	  not received an update since Sat Oct 9 13:55:06 2021 commit:
-	  33ece2446e25e20929d1c7eefa9f3244a3b79a92 and is not python
-	  3.12.0 compatible.
-
-	  Furthermore, the current version requires at least 42 new
-	  packages worth of depedencies of which several require
-	  patches to be python 3.12.0 compatible. As nobody has
-	  stepped up to maintain the package and its ever-growing list
-	  of dependencies, along with the other problems, it was time
-	  to drop the package.
-
-config BR2_PACKAGE_PYTHON_PYGAME
-	bool "python-pygame removed"
-	select BR2_LEGACY
-	help
-	  python-pygame has been removed due to being abandoned and
-	  the old version no longer building with python 3.12.0.
-
-config BR2_KERNEL_HEADERS_4_14
-	bool "kernel headers version 4.14.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 4.14.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_PACKAGE_LIBCAMERA_PIPELINE_RASPBERRYPI
-	bool "libcamera pipeline 'raspberrypi' was renamed to 'rpi/vc4'"
-	depends on BR2_arm || BR2_aarch64
-	depends on BR2_USE_WCHAR
-	select BR2_LEGACY
-	select BR2_PACKAGE_LIBCAMERA_PIPELINE_RPI_VC4
-	help
-	  Since version 0.1.0, the pipeline option 'raspberrypi' was
-	  renamed to 'rpi/vc4'.
-
-config BR2_GDB_VERSION_11
-	bool "gdb 11.x removed"
-	select BR2_LEGACY
-	help
-	  GDB 11.x has been removed, use a newer version.
-
-config BR2_PACKAGE_LIBMPD
-	bool "libmpd package was removed"
-	select BR2_LEGACY
-	help
-	  The libmpd package was only used by gmpc, both of which are
-	  no longer maintained upstream.
-
-config BR2_PACKAGE_GMPC
-	bool "gmpc package was removed"
-	select BR2_LEGACY
-	help
-	  The gmpc package was removed because it was unmaintained,
-	  and still using the old libsoup2 library.
-
-config BR2_PACKAGE_FLICKCURL
-	bool "flickcurl package was removed"
-	select BR2_LEGACY
-	help
-	  The flickcurl package was removed because it was
-	  unmaintained upstream and causing build failures.
-
-config BR2_PACKAGE_ONEVPL
-	bool "onevpl package was renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_LIBVPL
-
-config BR2_KERNEL_HEADERS_6_5
-	bool "kernel headers version 6.5.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 6.5.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_PACKAGE_WATCHDOGD_GENERIC_POLL
-	int "watchdogd generic poll has been replaced"
-	default 0
-	help
-	  The generic script poll interval has been replaced upstream
-	  with a boolean on/off.  Your configuration has been migrated.
-
-	  Set this legacy option to 0 here to remove the warning.
-
-# Note: BR2_PACKAGE_WATCHDOGD_*_POLL_WRAP referenced in package/watchdogd/Config.in
-config BR2_PACKAGE_WATCHDOGD_GENERIC_POLL_WRAP
-	bool
-	default y if BR2_PACKAGE_WATCHDOGD_GENERIC_POLL != 0
-	select BR2_LEGACY
-
-config BR2_PACKAGE_WATCHDOGD_LOADAVG_POLL
-	int "watchdogd loadavg poll has been replaced"
-	default 0
-	help
-	  The CPU load average poll interval has been replaced upstream
-	  with a boolean on/off.  Your configuration has been migrated.
-
-	  Set this legacy option to 0 here to remove the warning.
-
-# Note: BR2_PACKAGE_WATCHDOGD_*_POLL_WRAP referenced in package/watchdogd/Config.in
-config BR2_PACKAGE_WATCHDOGD_LOADAVG_POLL_WRAP
-	bool
-	default y if BR2_PACKAGE_WATCHDOGD_LOADAVG_POLL != 0
-	select BR2_LEGACY
-
-config BR2_PACKAGE_WATCHDOGD_FILENR_POLL
-	int "watchdogd filenr poll has been replaced"
-	default 0
-	help
-	  The file descriptor leak poll has been replaced upstream with
-	  a boolean on/off.  Your configuration has been migrated.
-
-	  Set this legacy option to 0 here to remove the warning.
-
-# Note: BR2_PACKAGE_WATCHDOGD_*_POLL_WRAP referenced in package/watchdogd/Config.in
-config BR2_PACKAGE_WATCHDOGD_FILENR_POLL_WRAP
-	bool
-	default y if BR2_PACKAGE_WATCHDOGD_FILENR_POLL != 0
-	select BR2_LEGACY
-
-config BR2_PACKAGE_WATCHDOGD_MEMINFO_POLL
-	int "watchdogd meminfo poll has been replaced"
-	default 0
-	help
-	  The memleak detector poll interval has been replaced upstream
-	  with a boolean on/off.  Your configuration has been migrated.
-
-	  Set this legacy option to 0 here to remove the warning.
-
-# Note: BR2_PACKAGE_WATCHDOGD_*_POLL_WRAP referenced in package/watchdogd/Config.in
-config BR2_PACKAGE_WATCHDOGD_MEMINFO_POLL_WRAP
-	bool
-	default y if BR2_PACKAGE_WATCHDOGD_MEMINFO_POLL != 0
-	select BR2_LEGACY
-
-comment "Legacy options removed in 2023.11"
-
-config BR2_PACKAGE_PYTHON_PYXB
-	bool "python-pyxb removed"
-	select BR2_LEGACY
-	help
-	  python-pyxb has been removed due to being abandoned and
-	  distutils no longer being supported in python 3.12.0.
-
-config BR2_PACKAGE_OPENJDK_VERSION_11
-	bool "openjdk 11 has been removed"
-	select BR2_LEGACY
-	help
-	  Version 11 of OpenJDK is no longer supported, version 17
-	  should now be used as the new LTS release.
-
-config BR2_KERNEL_HEADERS_6_4
-	bool "kernel headers version 6.4.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 6.4.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_PACKAGE_GOOGLE_MATERIAL_DESIGN_ICONS
-	bool "google-material-design-icons removed"
-	select BR2_LEGACY
-	help
-	  The google-material-design-icons package has been removed.
-
-config BR2_GDB_VERSION_10
-	bool "gdb 10.x removed"
-	select BR2_LEGACY
-	help
-	  gdb 10.x has been removed, use a newer version.
-
-comment "Legacy options removed in 2023.08"
-
-config BR2_TARGET_LPC32XXCDL
-	bool "lpc32xxcdl has been removed"
-	select BR2_LEGACY
-	help
-	  lpc32xxcdl has been removed, due to licensing concerns.
-
-config BR2_BINUTILS_VERSION_2_38_X
-	bool "binutils 2.38.x has been removed"
-	select BR2_LEGACY
-	help
-	  binutils 2.38 has been removed, use a newer version.
-
-config BR2_GCC_VERSION_10_X
-	bool "gcc 10.x support removed"
-	select BR2_LEGACY
-	help
-	  Support for gcc version 10.x has been removed. The current
-	  default version (12.x or later) has been selected instead.
-
-config BR2_KERNEL_HEADERS_6_3
-	bool "kernel headers version 6.3.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 6.3.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_PACKAGE_TOVID
-	bool "tovid removed"
-	select BR2_LEGACY
-	help
-	  tovid was removed
-
-config BR2_PACKAGE_LIBASPLIB
-	bool "libasplib removed"
-	select BR2_LEGACY
-	help
-	  libasplib is no longer needed.
-
-config BR2_PACKAGE_OCF_LINUX
-	bool "ocf-linux has been removed"
-	select BR2_LEGACY
-	help
-	  ocf-linux is incompatible with newer kernels.
-
-config BR2_BINUTILS_VERSION_2_37_X
-	bool "binutils 2.37.x has been removed"
-	select BR2_LEGACY
-	help
-	  binutils 2.37 has been removed, use a newer version.
-
-comment "Legacy options removed in 2023.05"
-
-config BR2_KERNEL_HEADERS_6_2
-	bool "kernel headers version 6.2.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 6.2.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_PACKAGE_ATK
-	bool "atk removed"
-	select BR2_LEGACY
-	help
-	  atk is now part of at-spi2-core.
-
-config BR2_PACKAGE_AT_SPI2_ATK
-	bool "at-spi2-atk removed"
-	select BR2_LEGACY
-	help
-	  at-spi2-atk is now part of at-spi2-core.
-
-config BR2_PACKAGE_OPTEE_BENCHMARK
-	bool "optee-benchmark has been removed"
-	select BR2_LEGACY
-	help
-	  optee-benchmark is no longer maintained upstream.
-
-config BR2_PACAKGE_OPENFPGALOADER_CMSIS
-	bool "openfpgaloader cmsis option name fixed"
-	select BR2_LEGACY
-	help
-	  A typo on BR2_PACAKGE_OPENFPGALOADER_CMSIS was fixed by
-	  renaming the option to BR2_PACKAGE_OPENFPGALOADER_CMSIS.
-
-comment "Legacy options removed in 2023.02"
-
-config BR2_PACKAGE_PUGIXML_HEADER_ONLY
-	bool "pugixml header-only removed"
-	select BR2_LEGACY
-	help
-	  The header-only version raises a build failure with gerbera.
-
-config BR2_PACKAGE_UCCP420WLAN
-	bool "uccp420wlan removed"
-	select BR2_LEGACY
-	help
-	  The uccp420wlan package is unmaintained and doesn't build
-	  with any "recent" kernel (e.g. >= 4.7).
-
-config BR2_PACKAGE_IMX_GPU_G2D_EXAMPLES
-	bool "imx-gpu-g2d examples removed"
-	select BR2_LEGACY
-	help
-	  The examples are not provided by NXP anymore.
-
-config BR2_KERNEL_HEADERS_6_0
-	bool "kernel headers version 6.0.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 6.0.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_KERNEL_HEADERS_4_9
-	bool "kernel headers version 4.9.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 4.9.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_PACKAGE_DOCKER_PROXY
-	bool "docker-proxy removed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_DOCKER_ENGINE
-	help
-	  docker-proxy has been dropped by upstream since version
-	  563fe8. it has been merged into docker-engine (moby).
-
-config BR2_PACKAGE_PYTHON_BUNCH
-	bool "python-bunch removed"
-	select BR2_LEGACY
-	help
-	  The python-bunch package is unmaintained and is replaced
-	  by the python-munch package.
-
-config BR2_TARGET_GUMMIBOOT
-	bool "gummiboot removed"
-	select BR2_LEGACY
-	help
-	  gummiboot has been deprecated since 2015, with no further
-	  updates. It became integrated into the systemd project as
-	  systemd-boot.
-
-config BR2_PACKAGE_IPUTILS_NINFOD
-	bool "iputils 20221126 removed ninfod"
-	select BR2_LEGACY
-	help
-	  iputils 20221126 removed ninfod.
-
-config BR2_PACKAGE_IPUTILS_RARPD
-	bool "iputils 20221126 removed rarpd"
-	select BR2_LEGACY
-	help
-	  iputils 20221126 removed rarpd.
-
-config BR2_PACKAGE_IPUTILS_RDISC
-	bool "iputils 20221126 removed rdisc"
-	select BR2_LEGACY
-	help
-	  iputils 20221126 removed rdisc.
-
-config BR2_PACKAGE_IPUTILS_RDISC_SERVER
-	bool "iputils 20221126 removed rdisc"
-	select BR2_LEGACY
-	help
-	  iputils 20221126 removed rdisc.
-
-config BR2_PACKAGE_GST1_PLUGINS_UGLY_PLUGIN_XINGMUX
-	bool "xingmux moved"
-	select BR2_LEGACY
-	select BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_XINGMUX
-	help
-	  The xingmux option has been moved to gst1-plugins-good.
-
-config BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_VIDEOSCALE
-	bool "videoscale removed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_VIDEOCONVERTSCALE
-	help
-	  The videoscale option has been combined with videoconvert.
-
-config BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_VIDEOCONVERT
-	bool "videoconvert removed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_VIDEOCONVERTSCALE
-	help
-	  The videoconvert option has been combined with videoscale.
-
-config BR2_PACKAGE_IMX_GPU_VIV_OUTPUT_X11
-	bool "imx-gpu-viv X11 output has been removed"
-	select BR2_LEGACY
-	help
-	  The X11 output was dropped by NXP.
-
-config BR2_PACKAGE_XDRIVER_XF86_VIDEO_IMX_VIV
-	bool "xf86-video-imx-viv has been removed"
-	select BR2_LEGACY
-	help
-	  The X11 output was dropped by NXP.
-
-config BR2_PACKAGE_QEMU_CUSTOM_TARGETS
-	string "the QEMU specific targets option has been removed"
-	help
-	  This option has been replaced by a list of individual targets
-	  for the many architectures supported by QEMU.
-
-config BR2_PACKAGE_QEMU_CUSTOM_TARGETS_WRAP
-	bool
-	default y if BR2_PACKAGE_QEMU_CUSTOM_TARGETS != ""
-	select BR2_LEGACY
-
-config BR2_PACKAGE_XDRIVER_XF86_INPUT_KEYBOARD
-	bool "xf86-input-keyboard removed"
-	select BR2_LEGACY
-	help
-	  The X.org keyboard input driver no longer support Linux.
-
-config BR2_TARGET_SUN20I_D1_SPL
-	bool "sun20-d1-spl removed"
-	select BR2_LEGACY
-	help
-	  U-Boot has gained SPL support for D1, so this temporary
-	  bootloader is no longer supported.
-
-config BR2_PACKAGE_PYTHON_M2R
-	bool "python-m2r removed"
-	select BR2_LEGACY
-	help
-	  The python-m2r package is unmaintained.
-
-config BR2_PACKAGE_MESA3D_XVMC
-	bool "mesa Gallium XvMC state tracker removed"
-	select BR2_LEGACY
-	help
-	  The Gallium XvMC state tracker was removed upstream.
-
-config BR2_KERNEL_HEADERS_5_19
-	bool "kernel headers version 5.19.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 5.19.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_PACKAGE_XDRIVER_XF86_VIDEO_TGA
-	bool "xf86-video-tga removed"
-	select BR2_LEGACY
-	help
-	  The X.org xf86-video-tga package was removed.
-
-config BR2_PACKAGE_XDRIVER_XF86_VIDEO_GLINT
-	bool "xf86-video-glint removed"
-	select BR2_LEGACY
-	help
-	  The X.org xf86-video-glint package no longer builds with
-	  Xserver 21 and is unmaintained.
-
-config BR2_PACKAGE_USBREDIR_SERVER
-	bool "usbredirserver removed"
-	select BR2_LEGACY
-	help
-	  usbredirserver has been dropped by upstream since version
-	  0.13.0. usbredir tools (which include usbredirect binary) can
-	  be used as a replacement.
-
 comment "Legacy options removed in 2022.11"

-config BR2_BINUTILS_VERSION_2_36_X
-	bool "binutils 2.36.x has been removed"
-	select BR2_LEGACY
-	help
-	  binutils 2.36 has been removed, use a newer version.
-
 config BR2_PACKAGE_RABBITMQ_SERVER
 	bool "rabbitmq-server removed"
 	select BR2_LEGACY
@@ -1137,22 +645,20 @@ config BR2_PACKAGE_SUNXI_MALI_MAINLINE
 config BR2_PACKAGE_SUNXI_MALI_MAINLINE_R6P2
 	bool "sunxi-mali-mainline-r6p2 was renamed"
 	select BR2_LEGACY
+	select BR2_PACKAGE_SUNXI_MALI_UTGARD_R6P2
 	help
 	  The sunxi-mali-mainline package has been renamed
 	  sunxi-mali-utgard, the suboptions of this package have also
 	  been renamed accordingly.
-# Note: BR2_PACKAGE_SUNXI_MALI_MAINLINE_R6P2 is still referenced from
-# package/sunxi-mali-utgard/Config.in

 config BR2_PACKAGE_SUNXI_MALI_MAINLINE_R8P1
 	bool "sunxi-mali-mainline-r8p1 was renamed"
 	select BR2_LEGACY
+	select BR2_PACKAGE_SUNXI_MALI_UTGARD_R8P1
 	help
 	  The sunxi-mali-mainline package has been renamed
 	  sunxi-mali-utgard, the suboptions of this package have also
 	  been renamed accordingly.
-# Note: BR2_PACKAGE_SUNXI_MALI_MAINLINE_R8P1 is still referenced from
-# package/sunxi-mali-utgard/Config.in

 config BR2_PACKAGE_QT5WEBKIT_EXAMPLES
 	bool "qt5webkit-examples removed"
@@ -1210,20 +716,18 @@ comment "Legacy options removed in 2021.11"
 config BR2_OPENJDK_VERSION_LTS
 	bool "OpenJDK LTS version was renamed to OpenJDK 11"
 	select BR2_LEGACY
+	select BR2_PACKAGE_OPENJDK_VERSION_11
 	help
 	  The LTS version option was renamed to OpenJDK 11 to make it
 	  clear what LTS version is.
-# Note: BR2_OPENJDK_VERSION_LTS is still referenced from
-# package/openjdk/Config.in

 config BR2_OPENJDK_VERSION_LATEST
 	bool "OpenJDK latest version (16.x) was removed"
 	select BR2_LEGACY
+	select BR2_PACKAGE_OPENJDK_VERSION_17
 	help
 	  OpenJDK 16.x is no longer mainted, so the option has been
 	  removed. Use OpenJDK 17.x instead.
-# Note: BR2_OPENJDK_VERSION_LATEST is still referenced from
-# package/openjdk/Config.in

 config BR2_PACKAGE_MPD_TIDAL
 	bool "mpd tidal option removed"
@@ -2139,35 +1643,6 @@ config BR2_PACKAGE_RPI_USERLAND_START_VCFILED
 	help
 	  The vcfiled support was removed upstream.

-config BR2_PACKAGE_TI_SGX_KM_AM335X
-	bool "ti-sgx-km AM335X option removed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_TI_SGX_KM
-	help
-	  Starting from buildroot release 2020.02, the buildroot package
-	  only supports the target am335x.
-
-config BR2_PACKAGE_TI_SGX_KM_AM437X
-	bool "ti-sgx-km AM437X option removed"
-	select BR2_LEGACY
-	help
-	  Starting from buildroot release 2020.02, the buildroot package
-	  only supports the target am335x.
-
-config BR2_PACKAGE_TI_SGX_KM_AM4430
-	bool "ti-sgx-km AM4430 option removed"
-	select BR2_LEGACY
-	help
-	  Starting from buildroot release 2020.02, the buildroot package
-	  only supports the target am335x.
-
-config BR2_PACKAGE_TI_SGX_KM_AM5430
-	bool "ti-sgx-km AM5430 option removed"
-	select BR2_LEGACY
-	help
-	  Starting from buildroot release 2020.02, the buildroot package
-	  only supports the target am335x.
-
 comment "Legacy options removed in 2019.11"

 config BR2_PACKAGE_OPENVMTOOLS_PROCPS
@@ -2633,9 +2108,9 @@ config BR2_PACKAGE_FFTW_PRECISION_QUAD
 config BR2_PACKAGE_LUA_5_2
 	bool "Lua 5.2.x version removed"
 	select BR2_LEGACY
+	select BR2_PACKAGE_LUA_5_3
 	help
 	  The Lua 5.2.x version was removed.
-# Note: BR2_PACKAGE_LUA_5_2 is still referenced from package/lua/Config.in

 config BR2_TARGET_GENERIC_PASSWD_MD5
 	bool "target passwd md5 format support has been removed"
@@ -3133,7 +2608,7 @@ config BR2_PACKAGE_MEDIAART_BACKEND_GDK_PIXBUF
 	  BR2_PACKAGE_MEDIAART_BACKEND_GDK_PIXBUF has been renamed to
 	  BR2_PACKAGE_LIBMEDIAART_BACKEND_GDK_PIXBUF

-config BR2_PACKAGE_MEDIAART_BACKEND_QT
+config BR2_PACKAGE_MEDIAART_BACKEND_GDK_PIXBUF
 	bool "libmediaart qt backend option renamed"
 	select BR2_LEGACY
 	help
@@ -3141,34 +2616,45 @@ config BR2_PACKAGE_MEDIAART_BACKEND_QT
 	  BR2_PACKAGE_MEDIAART_BACKEND_QT has been renamed to
 	  BR2_PACKAGE_LIBMEDIAART_BACKEND_QT

+# Note: BR2_PACKAGE_TI_SGX_AM335X is still referenced from
+# package/ti-sgx-km/Config.in
 config BR2_PACKAGE_TI_SGX_AM335X
-	bool "ti-sgx-km AM335X option removed"
+	bool "ti-sgx-km AM335X option renamed"
 	select BR2_LEGACY
-	select BR2_PACKAGE_TI_SGX_KM
 	help
-	  Starting from buildroot release 2020.02, the buildroot package
-	  only supports the target am335x.
+	  For consistency reasons, the option
+	  BR2_PACKAGE_TI_SGX_AM335X has been renamed to
+	  BR2_PACKAGE_TI_SGX_KM_AM335X.

+# Note: BR2_PACKAGE_TI_SGX_AM437X is still referenced from
+# package/ti-sgx-km/Config.in
 config BR2_PACKAGE_TI_SGX_AM437X
-	bool "ti-sgx-km AM437X option removed"
+	bool "ti-sgx-km AM437X option renamed"
 	select BR2_LEGACY
 	help
-	  Starting from buildroot release 2020.02, the buildroot package
-	  only supports the target am335x.
+	  For consistency reasons, the option
+	  BR2_PACKAGE_TI_SGX_AM437X has been renamed to
+	  BR2_PACKAGE_TI_SGX_KM_AM437X.

+# Note: BR2_PACKAGE_TI_SGX_AM4430 is still referenced from
+# package/ti-sgx-km/Config.in
 config BR2_PACKAGE_TI_SGX_AM4430
-	bool "ti-sgx-km AM4430 option removed"
+	bool "ti-sgx-km AM4430 option renamed"
 	select BR2_LEGACY
 	help
-	  Starting from buildroot release 2020.02, the buildroot package
-	  only supports the target am335x.
+	  For consistency reasons, the option
+	  BR2_PACKAGE_TI_SGX_AM4430 has been renamed to
+	  BR2_PACKAGE_TI_SGX_KM_AM4430.

+# Note: BR2_PACKAGE_TI_SGX_AM5430 is still referenced from
+# package/ti-sgx-km/Config.in
 config BR2_PACKAGE_TI_SGX_AM5430
-	bool "ti-sgx-km AM5430 option removed"
+	bool "ti-sgx-km AM5430 option renamed"
 	select BR2_LEGACY
 	help
-	  Starting from buildroot release 2020.02, the buildroot package
-	  only supports the target am335x.
+	  For consistency reasons, the option
+	  BR2_PACKAGE_TI_SGX_AM5430 has been renamed to
+	  BR2_PACKAGE_TI_SGX_KM_AM5430.

 config BR2_PACKAGE_JANUS_AUDIO_BRIDGE
 	bool "janus-gateway audio-bridge option renamed"
@@ -3768,7 +3254,7 @@ config BR2_PACKAGE_POLICYCOREUTILS_RESTORECOND
 	select BR2_PACKAGE_RESTORECOND
 	help
 	  The policycoreutils package no longer offers restorecond
-	  as a option.  This package has been moved into a separate
+	  as a option.  This package has been moved into a seperate
 	  package maintained by the SELinux maintainers.

 config BR2_PACKAGE_SEPOLGEN
@@ -4362,7 +3848,7 @@ config BR2_GDB_VERSION_7_9
 comment "Legacy options removed in 2016.11"

 config BR2_PACKAGE_PHP_SAPI_CLI_CGI
-	bool "PHP CGI and CLI options are now separate"
+	bool "PHP CGI and CLI options are now seperate"
 	select BR2_PACKAGE_PHP_SAPI_CLI
 	select BR2_PACKAGE_PHP_SAPI_CGI
 	select BR2_LEGACY
@@ -4498,11 +3984,10 @@ config BR2_LINUX_KERNEL_TOOL_SELFTESTS
 config BR2_GCC_VERSION_4_8_ARC
 	bool "gcc arc option renamed"
 	select BR2_LEGACY
+	select BR2_GCC_VERSION_ARC
 	help
 	  The option that selects the gcc version for the ARC
 	  architecture has been renamed to BR2_GCC_VERSION_ARC.
-# Note: BR2_GCC_VERSION_4_8_ARC is still referenced from
-# package/gcc/Config.in.host

 config BR2_KERNEL_HEADERS_4_0
 	bool "kernel headers version 4.0.x are no longer supported"
@@ -4842,21 +4327,19 @@ config BR2_PACKAGE_OPENPOWERLINK_DEBUG_LEVEL
 config BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE
 	bool "openpowerlink package has been updated"
 	select BR2_LEGACY
+	select BR2_PACKAGE_OPENPOWERLINK_STACK_KERNEL_STACK_LIB
 	help
 	  openpowerlink kernel modules are built if the
 	  kernel stack library is selected.
-# Note: BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE is still referenced from
-# package/openpowerlink/Config.in

 config BR2_PACKAGE_OPENPOWERLINK_LIBPCAP
 	bool "openpowerlink package has been updated"
 	select BR2_LEGACY
+	select BR2_PACKAGE_OPENPOWERLINK_STACK_USERSPACE_DAEMON_LIB
 	help
 	  The user space support has been split in two part:
-	  - a monolithic user space library
-	  - a user space daemon driver
-# Note: BR2_PACKAGE_OPENPOWERLINK_LIBPCAP is still referenced from
-# package/openpowerlink/Config.in
+	  - a monolitic user space library
+	  - a user spae deamon driver

 config BR2_LINUX_KERNEL_SAME_AS_HEADERS
 	bool "using the linux headers version for the kernel has been removed"
@@ -5395,7 +4878,7 @@ config BR2_PACKAGE_KODI_PVR_ADDONS
 	select BR2_PACKAGE_KODI_PVR_VUPLUS
 	select BR2_PACKAGE_KODI_PVR_WMC
 	help
-	  Kodi PVR addon was split into separate modules
+	  Kodi PVR addon was split into seperate modules

 config BR2_BINUTILS_VERSION_2_23_2
 	bool "binutils 2.23 option renamed"
@@ -1,6 +1,8 @@
 # Makefile for buildroot
 #
-# Copyright (C) the Buildroot developers <buildroot@buildroot.org>
+# Copyright (C) 1999-2005 by Erik Andersen <andersen@codepoet.org>
+# Copyright (C) 2006-2014 by the Buildroot developers <buildroot@uclibc.org>
+# Copyright (C) 2014-2020 by the Buildroot developers <buildroot@buildroot.org>
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -90,9 +92,9 @@ all:
 .PHONY: all

 # Set and export the version string
-export BR2_VERSION := 2024.02
+export BR2_VERSION := 2022.11.1
 # Actual time the release is cut (for reproducible builds)
-BR2_VERSION_EPOCH = 1709640000
+BR2_VERSION_EPOCH = 1674028000

 # Save running make version since it's clobbered by the make package
 RUNNING_MAKE_VERSION := $(MAKE_VERSION)
@@ -123,7 +125,7 @@ endif
 noconfig_targets := menuconfig nconfig gconfig xconfig config oldconfig randconfig \
 	defconfig %_defconfig allyesconfig allnoconfig alldefconfig syncconfig release \
 	randpackageconfig allyespackageconfig allnopackageconfig \
-	print-version olddefconfig distclean manual manual-% check-package
+	print-version olddefconfig distclean manual manual-% check-package check-flake8

 # Some global targets do not trigger a build, but are used to collect
 # metadata, or do various checks. When such targets are triggered,
@@ -227,6 +229,8 @@ LEGAL_MANIFEST_CSV_HOST = $(LEGAL_INFO_DIR)/host-manifest.csv
 LEGAL_WARNINGS = $(LEGAL_INFO_DIR)/.warnings
 LEGAL_REPORT = $(LEGAL_INFO_DIR)/README

+CPE_UPDATES_DIR = $(BASE_DIR)/cpe-updates
+
 BR2_CONFIG = $(CONFIG_DIR)/.config

 # Pull in the user's configuration file
@@ -351,7 +355,7 @@ export HOSTARCH := $(shell LC_ALL=C $(HOSTCC_NOCCACHE) -v 2>&1 | \

 # When adding a new host gcc version in Config.in,
 # update the HOSTCC_MAX_VERSION variable:
-HOSTCC_MAX_VERSION := 11
+HOSTCC_MAX_VERSION := 9

 HOSTCC_VERSION := $(shell V=$$($(HOSTCC_NOCCACHE) --version | \
 	sed -n -r 's/^.* ([0-9]*)\.([0-9]*)\.([0-9]*)[ ]*.*/\1 \2/p'); \
@@ -392,9 +396,6 @@ unexport DESTDIR
 # Causes breakage with packages that needs host-ruby
 unexport RUBYOPT

-# Compilation of perl-related packages will fail otherwise
-unexport PERL_MM_OPT
-
 include package/pkg-utils.mk
 include package/doc-asciidoc.mk

@@ -592,13 +593,8 @@ world: target-post-image
 .PHONY: prepare-sdk
 prepare-sdk: world
 	@$(call MESSAGE,"Rendering the SDK relocatable")
-	PARALLEL_JOBS=$(PARALLEL_JOBS) \
-		PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) \
-		$(TOPDIR)/support/scripts/fix-rpath host
-	PARALLEL_JOBS=$(PARALLEL_JOBS) \
-		PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) \
-		$(TOPDIR)/support/scripts/fix-rpath staging
-	$(call ppd-fixup-paths,$(BASE_DIR))
+	PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) $(TOPDIR)/support/scripts/fix-rpath host
+	PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) $(TOPDIR)/support/scripts/fix-rpath staging
 	$(INSTALL) -m 755 $(TOPDIR)/support/misc/relocate-sdk.sh $(HOST_DIR)/relocate-sdk.sh
 	mkdir -p $(HOST_DIR)/share/buildroot
 	echo $(HOST_DIR) > $(HOST_DIR)/share/buildroot/sdk-location
@@ -715,7 +711,7 @@ STAGING_DIR_FILES_LISTS = $(sort $(wildcard $(BUILD_DIR)/*/.files-list-staging.t
 .PHONY: host-finalize
 host-finalize: $(PACKAGES) $(HOST_DIR) $(HOST_DIR_SYMLINK)
 	@$(call MESSAGE,"Finalizing host directory")
-	$(call per-package-rsync,$(sort $(PACKAGES)),host,$(HOST_DIR),copy)
+	$(call per-package-rsync,$(sort $(PACKAGES)),host,$(HOST_DIR))

 .PHONY: staging-finalize
 staging-finalize: $(STAGING_DIR_SYMLINK)
@@ -723,7 +719,7 @@ staging-finalize: $(STAGING_DIR_SYMLINK)
 .PHONY: target-finalize
 target-finalize: $(PACKAGES) $(TARGET_DIR) host-finalize
 	@$(call MESSAGE,"Finalizing target directory")
-	$(call per-package-rsync,$(sort $(PACKAGES)),target,$(TARGET_DIR),copy)
+	$(call per-package-rsync,$(sort $(PACKAGES)),target,$(TARGET_DIR))
 	$(foreach hook,$(TARGET_FINALIZE_HOOKS),$($(hook))$(sep))
 	rm -rf $(TARGET_DIR)/usr/include $(TARGET_DIR)/usr/share/aclocal \
 		$(TARGET_DIR)/usr/lib/pkgconfig $(TARGET_DIR)/usr/share/pkgconfig \
@@ -768,9 +764,7 @@ endif
 	ln -sf ../usr/lib/os-release $(TARGET_DIR)/etc

 	@$(call MESSAGE,"Sanitizing RPATH in target tree")
-	PARALLEL_JOBS=$(PARALLEL_JOBS) \
-		PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) \
-		$(TOPDIR)/support/scripts/fix-rpath target
+	PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) $(TOPDIR)/support/scripts/fix-rpath target

 # For a merged /usr, ensure that /lib, /bin and /sbin and their /usr
 # counterparts are appropriately setup as symlinks ones to the others.
@@ -836,7 +830,7 @@ legal-info-clean:
 .PHONY: legal-info-prepare
 legal-info-prepare: $(LEGAL_INFO_DIR)
 	@$(call MESSAGE,"Buildroot $(BR2_VERSION_FULL) Collecting legal info")
-	@$(call legal-license-file,HOST,buildroot,buildroot,COPYING,COPYING,support/legal-info/buildroot.hash)
+	@$(call legal-license-file,buildroot,buildroot,support/legal-info/buildroot.hash,COPYING,COPYING,HOST)
 	@$(call legal-manifest,TARGET,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,SOURCE SITE,DEPENDENCIES WITH LICENSES)
 	@$(call legal-manifest,HOST,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,SOURCE SITE,DEPENDENCIES WITH LICENSES)
 	@$(call legal-manifest,HOST,buildroot,$(BR2_VERSION_FULL),GPL-2.0+,COPYING,not saved,not saved)
@@ -932,6 +926,14 @@ pkg-stats:
 		--html $(O)/pkg-stats.html \
 		--nvd-path $(DL_DIR)/buildroot-nvd

+.PHONY: missing-cpe
+missing-cpe:
+	$(Q)mkdir -p $(CPE_UPDATES_DIR)
+	$(Q)cd "$(CONFIG_DIR)" ; \
+	$(TOPDIR)/support/scripts/gen-missing-cpe \
+		--nvd-path $(DL_DIR)/buildroot-nvd \
+		--output $(CPE_UPDATES_DIR)
+
 else # ifeq ($(BR2_HAVE_DOT_CONFIG),y)

 # Some subdirectories are also package names. To avoid that "make linux"
@@ -1039,7 +1041,7 @@ savedefconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile

 # staging and target directories do NOT list these as
 # dependencies anywhere else
-$(BASE_DIR) $(BUILD_DIR) $(BASE_TARGET_DIR) $(HOST_DIR) $(BINARIES_DIR) $(LEGAL_INFO_DIR) $(REDIST_SOURCES_DIR_TARGET) $(REDIST_SOURCES_DIR_HOST) $(PER_PACKAGE_DIR):
+$(BUILD_DIR) $(BASE_TARGET_DIR) $(HOST_DIR) $(BINARIES_DIR) $(LEGAL_INFO_DIR) $(REDIST_SOURCES_DIR_TARGET) $(REDIST_SOURCES_DIR_HOST) $(PER_PACKAGE_DIR):
 	@mkdir -p $@

 # outputmakefile generates a Makefile in the output directory, if using a
@@ -1102,7 +1104,8 @@ show-vars:
 clean:
 	rm -rf $(BASE_TARGET_DIR) $(BINARIES_DIR) $(HOST_DIR) $(HOST_DIR_SYMLINK) \
 		$(BUILD_DIR) $(BASE_DIR)/staging \
-		$(LEGAL_INFO_DIR) $(GRAPHS_DIR) $(PER_PACKAGE_DIR) $(O)/pkg-stats.*
+		$(LEGAL_INFO_DIR) $(GRAPHS_DIR) $(PER_PACKAGE_DIR) $(CPE_UPDATES_DIR) \
+		$(O)/pkg-stats.*

 .PHONY: distclean
 distclean: clean
@@ -1187,6 +1190,7 @@ help:
 	@echo '  legal-info             - generate info about license compliance'
 	@echo '  show-info              - generate info about packages, as a JSON blurb'
 	@echo '  pkg-stats              - generate info about packages as JSON and HTML'
+	@echo '  missing-cpe            - generate XML snippets for missing CPE identifiers'
 	@echo '  printvars              - dump internal variables selected with VARS=...'
 	@echo '  show-vars              - dump all internal variables as a JSON blurb; use VARS=...'
 	@echo '                           to limit the list to variables names matching that pattern'
@@ -1244,21 +1248,21 @@ release:
 print-version:
 	@echo $(BR2_VERSION_FULL)

-check-package:
-	$(Q)./utils/check-package `git ls-tree -r --name-only HEAD` \
-		--ignore-list=$(TOPDIR)/.checkpackageignore
+check-flake8:
+	$(Q)git ls-tree -r --name-only HEAD \
+	| xargs file \
+	| grep 'Python script' \
+	| cut -d':' -f1 \
+	| xargs -- python3 -m flake8 --statistics

-.PHONY: .checkpackageignore
-.checkpackageignore:
-	$(Q)./utils/check-package --failed-only `git ls-tree -r --name-only HEAD` \
-		> .checkpackageignore
+check-package:
+	find $(TOPDIR) -type f \( -name '*.mk' -o -name '*.hash' -o -name 'Config.*' -o -name '*.patch' \) \
+		-a -not -name '*.orig' -a -not -name '*.rej' \
+		-exec ./utils/check-package --exclude=Sob {} +

 include docs/manual/manual.mk
 -include $(foreach dir,$(BR2_EXTERNAL_DIRS),$(sort $(wildcard $(dir)/docs/*/*.mk)))

 .PHONY: $(noconfig_targets)

-# .WAIT was introduced in make 4.4. For older make, define it as phony.
-.PHONY: .WAIT
-
 endif #umask / $(CURDIR) / $(O)
@@ -216,11 +216,6 @@ config BR2_sh
 config BR2_sparc
 	bool "SPARC"
 	select BR2_USE_MMU
-	# uClibc-ng broken on sparc due to recent gcc changes
-	# that need to be reverted since gcc 8.4, 9.3 and 10.1.
-	# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98784
-	# gcc <= 10.x has been removed from Buildroot.
-	select BR2_ARCH_HAS_NO_TOOLCHAIN_BUILDROOT
 	help
 	  SPARC (from Scalable Processor Architecture) is a RISC
 	  instruction set architecture (ISA) developed by Sun
@@ -309,14 +304,6 @@ config BR2_ARCH_NEEDS_GCC_AT_LEAST_12
 	bool
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_11

-config BR2_ARCH_NEEDS_GCC_AT_LEAST_13
-	bool
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_12
-
-config BR2_ARCH_NEEDS_GCC_AT_LEAST_14
-	bool
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_13
-
 # The following string values are defined by the individual
 # Config.in.$ARCH files
 config BR2_ARCH
@@ -781,9 +781,6 @@ choice
 config BR2_ARM64_PAGE_SIZE_4K
 	bool "4KB"

-config BR2_ARM64_PAGE_SIZE_16K
-	bool "16KB"
-
 config BR2_ARM64_PAGE_SIZE_64K
 	bool "64KB"

@@ -792,7 +789,6 @@ endchoice
 config BR2_ARM64_PAGE_SIZE
 	string
 	default "4K" if BR2_ARM64_PAGE_SIZE_4K
-	default "16K" if BR2_ARM64_PAGE_SIZE_16K
 	default "64K" if BR2_ARM64_PAGE_SIZE_64K

 config BR2_ARCH
@@ -40,8 +40,8 @@ choice
 	help
 	  Specific CPU variant to use

-	  64bit capable: mips4, 64, 64r2, 64r3, 64r5, 64r6
-	  non-64bit capable: mips4, 32, 32r2, 32r3, 32r5, 32r6
+	  64bit capable: 64, 64r2, 64r3, 64r5, 64r6
+	  non-64bit capable: 32, 32r2, 32r3, 32r5, 32r6

 config BR2_mips_32
 	bool "Generic MIPS32"
@@ -97,8 +97,6 @@ config BR2_mips_xburst
 	  to be used in order to prevent emitting these instructions.

 	  See http://www.ingenic.com/en/?xburst.html
-config BR2_mips4
-	bool "MIPS IV"
 config BR2_mips_64
 	bool "Generic MIPS64"
 	depends on BR2_ARCH_IS_64
@@ -264,7 +262,6 @@ config BR2_GCC_TARGET_ARCH
 	default "octeon2"	if BR2_mips_octeon2
 	default "octeon3"	if BR2_mips_octeon3
 	default "p6600"		if BR2_mips_p6600
-	default "mips4"		if BR2_mips4

 config BR2_MIPS_OABI32
 	bool
@@ -146,6 +146,21 @@ config BR2_powerpc_power9
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_6
 endchoice

+choice
+	prompt "Target ABI"
+	default BR2_powerpc_SPE if BR2_POWERPC_CPU_HAS_SPE
+	default BR2_powerpc_CLASSIC
+	help
+	  Application Binary Interface to use
+
+config BR2_powerpc_CLASSIC
+	bool "Classic"
+	depends on !BR2_POWERPC_CPU_HAS_SPE
+config BR2_powerpc_SPE
+	bool "SPE"
+	depends on BR2_POWERPC_CPU_HAS_SPE
+endchoice
+
 config BR2_POWERPC_SOFT_FLOAT
 	bool "Use soft-float"
 	select BR2_SOFT_FLOAT
@@ -1,5 +1,23 @@
 # RISC-V CPU ISA extensions.

+config BR2_RISCV_ISA_RVI
+	bool
+
+config BR2_RISCV_ISA_RVM
+	bool
+
+config BR2_RISCV_ISA_RVA
+	bool
+
+config BR2_RISCV_ISA_RVF
+	bool
+
+config BR2_RISCV_ISA_RVD
+	bool
+
+config BR2_RISCV_ISA_RVC
+	bool
+
 choice
 	prompt "Target Architecture Variant"
 	default BR2_riscv_g
@@ -17,33 +35,35 @@ config BR2_riscv_g
 config BR2_riscv_custom
 	bool "Custom architecture"
 	select BR2_RISCV_ISA_RVI
+	select BR2_RISCV_ISA_CUSTOM_RVA

 endchoice

+if BR2_riscv_custom
+
 comment "Instruction Set Extensions"

-config BR2_RISCV_ISA_RVI
-	bool "Base Integer (I)"
-
-config BR2_RISCV_ISA_RVM
+config BR2_RISCV_ISA_CUSTOM_RVM
 	bool "Integer Multiplication and Division (M)"
+	select BR2_RISCV_ISA_RVM

-config BR2_RISCV_ISA_RVA
+config BR2_RISCV_ISA_CUSTOM_RVA
 	bool "Atomic Instructions (A)"
+	select BR2_RISCV_ISA_RVA

-config BR2_RISCV_ISA_RVF
+config BR2_RISCV_ISA_CUSTOM_RVF
 	bool "Single-precision Floating-point (F)"
+	select BR2_RISCV_ISA_RVF

-config BR2_RISCV_ISA_RVD
+config BR2_RISCV_ISA_CUSTOM_RVD
 	bool "Double-precision Floating-point (D)"
 	depends on BR2_RISCV_ISA_RVF
+	select BR2_RISCV_ISA_RVD

-config BR2_RISCV_ISA_RVC
+config BR2_RISCV_ISA_CUSTOM_RVC
 	bool "Compressed Instructions (C)"
-
-config BR2_RISCV_ISA_RVV
-	bool "Vector Instructions (V)"
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_12
+	select BR2_RISCV_ISA_RVC
+endif

 choice
 	prompt "Target Architecture Size"
@@ -19,20 +19,12 @@ config BR2_X86_CPU_HAS_AVX
 	bool
 config BR2_X86_CPU_HAS_AVX2
 	bool
-
-# BR2_X86_CPU_HAS_AVX512 implies the following AVX512 extensions:
-#   AVX512F, AVX512BW, AVX512CD, AVX512DQ, AVX512VL
-# This subset is common to Intel Xeon (excl Xeon Phi), AMD Zen 4, and
-# the x86-64-v4 psABI.
-#
-# Only select BR2_X86_CPU_HAS_AVX512 if the CPU supports this entire
-# subset of extensions.
 config BR2_X86_CPU_HAS_AVX512
 	bool

 # This list of CPU architecture variant is (loosely) ordered according
 # to the gcc documentation at
-# https://gcc.gnu.org/onlinedocs/gcc-13.2.0/gcc/x86-Options.html
+# https://gcc.gnu.org/onlinedocs/gcc-11.2.0/gcc/x86-Options.html
 choice
 	prompt "Target Architecture Variant"
 	default BR2_x86_i586 if BR2_i386
@@ -235,17 +227,6 @@ config BR2_x86_sandybridge
 	select BR2_X86_CPU_HAS_SSE42
 	select BR2_X86_CPU_HAS_AVX
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_4_9
-config BR2_x86_ivybridge
-	bool "ivybridge"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_4_9
 config BR2_x86_core_avx2
 	bool "core-avx2"
 	select BR2_X86_CPU_HAS_MMX
@@ -354,54 +335,6 @@ config BR2_x86_tremont
 	select BR2_X86_CPU_HAS_SSE4
 	select BR2_X86_CPU_HAS_SSE42
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_9
-config BR2_x86_sierraforest
-	bool "sierraforest"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_13
-config BR2_x86_grandridge
-	bool "grandridge"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_13
-config BR2_x86_knightslanding
-	bool "knightslanding"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_5
-config BR2_x86_knightsmill
-	bool "knightsmill"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_8
 config BR2_x86_skylake_avx512
 	bool "skylake-avx512"
 	select BR2_X86_CPU_HAS_MMX
@@ -506,8 +439,6 @@ config BR2_x86_sapphirerapids
 	select BR2_X86_CPU_HAS_AVX2
 	select BR2_X86_CPU_HAS_AVX512
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_11
-	help
-	  Use for Sapphire Rapids, Emerald Rapids
 config BR2_x86_alderlake
 	bool "alderlake"
 	select BR2_X86_CPU_HAS_MMX
@@ -519,9 +450,8 @@ config BR2_x86_alderlake
 	select BR2_X86_CPU_HAS_SSE42
 	select BR2_X86_CPU_HAS_AVX
 	select BR2_X86_CPU_HAS_AVX2
+	select BR2_X86_CPU_HAS_AVX512
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_11
-	help
-	  Use for Alder Lake, Raptor Lake, Meteor Lake
 config BR2_x86_rocketlake
 	bool "rocketlake"
 	select BR2_X86_CPU_HAS_MMX
@@ -535,32 +465,6 @@ config BR2_x86_rocketlake
 	select BR2_X86_CPU_HAS_AVX2
 	select BR2_X86_CPU_HAS_AVX512
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_11
-config BR2_x86_graniterapids
-	bool "graniterapids"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_X86_CPU_HAS_AVX512
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_13
-config BR2_x86_graniterapids_d
-	bool "graniterapids-d"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_X86_CPU_HAS_AVX512
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_13
 config BR2_x86_k6
 	bool "k6"
 	depends on !BR2_x86_64
@@ -598,13 +502,6 @@ config BR2_x86_barcelona
 	select BR2_X86_CPU_HAS_SSE
 	select BR2_X86_CPU_HAS_SSE2
 	select BR2_X86_CPU_HAS_SSE3
-config BR2_x86_bobcat
-	bool "bobcat"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
 config BR2_x86_jaguar
 	bool "jaguar"
 	select BR2_X86_CPU_HAS_MMX
@@ -614,25 +511,6 @@ config BR2_x86_jaguar
 	select BR2_X86_CPU_HAS_SSSE3
 	select BR2_X86_CPU_HAS_SSE4
 	select BR2_X86_CPU_HAS_SSE42
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_4_8
-config BR2_x86_bulldozer
-	bool "bulldozer"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-config BR2_x86_piledriver
-	bool "piledriver"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
 config BR2_x86_steamroller
 	bool "steamroller"
 	select BR2_X86_CPU_HAS_MMX
@@ -642,73 +520,12 @@ config BR2_x86_steamroller
 	select BR2_X86_CPU_HAS_SSSE3
 	select BR2_X86_CPU_HAS_SSE4
 	select BR2_X86_CPU_HAS_SSE42
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_4_8
-config BR2_x86_excavator
-	bool "excavator"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_4_9
-config BR2_x86_zen
-	bool "zen"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_6
-config BR2_x86_zen2
-	bool "zen 2"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_9
-config BR2_x86_zen3
-	bool "zen 3"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_11
-config BR2_x86_zen4
-	bool "zen 4"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
-	select BR2_X86_CPU_HAS_AVX
-	select BR2_X86_CPU_HAS_AVX2
-	select BR2_X86_CPU_HAS_AVX512
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_13
 config BR2_x86_geode
-	bool "AMD Geode"
+	bool "geode"
+	# Don't include MMX support because there several variant of geode
+	# processor, some with MMX support, some without.
+	# See: http://en.wikipedia.org/wiki/Geode_%28processor%29
 	depends on !BR2_x86_64
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_3DNOW
 config BR2_x86_c3
 	bool "Via/Cyrix C3 (Samuel/Ezra cores)"
 	depends on !BR2_x86_64
@@ -776,7 +593,6 @@ config BR2_GCC_TARGET_ARCH
 	default "nehalem"	if BR2_x86_nehalem
 	default "corei7-avx"	if BR2_x86_corei7_avx
 	default "sandybridge"	if BR2_x86_sandybridge
-	default "ivybridge"	if BR2_x86_ivybridge
 	default "core-avx2"	if BR2_x86_core_avx2
 	default "haswell"	if BR2_x86_haswell
 	default "broadwell"	if BR2_x86_broadwell
@@ -788,10 +604,6 @@ config BR2_GCC_TARGET_ARCH
 	default "goldmont"	if BR2_x86_goldmont
 	default "goldmont-plus"	if BR2_x86_goldmont_plus
 	default "tremont"	if BR2_x86_tremont
-	default "sierraforest"	if BR2_x86_sierraforest
-	default "grandridge"	if BR2_x86_grandridge
-	default "knl"		if BR2_x86_knightslanding
-	default "knm"		if BR2_x86_knightsmill
 	default "skylake-avx512" if BR2_x86_skylake_avx512
 	default "cannonlake"	if BR2_x86_cannonlake
 	default "icelake-client" if BR2_x86_icelake_client
@@ -802,21 +614,11 @@ config BR2_GCC_TARGET_ARCH
 	default "sapphirerapids" if BR2_x86_sapphirerapids
 	default "alderlake"	if BR2_x86_alderlake
 	default "rocketlake"	if BR2_x86_rocketlake
-	default "graniterapids"	if BR2_x86_graniterapids
-	default "graniterapids-d"	if BR2_x86_graniterapids_d
 	default "k8"		if BR2_x86_opteron
 	default "k8-sse3"	if BR2_x86_opteron_sse3
 	default "barcelona"	if BR2_x86_barcelona
-	default "btver1"	if BR2_x86_bobcat
 	default "btver2"	if BR2_x86_jaguar
-	default "bdver1"	if BR2_x86_bulldozer
-	default "bdver2"	if BR2_x86_piledriver
 	default "bdver3"	if BR2_x86_steamroller
-	default "bdver4"	if BR2_x86_excavator
-	default "znver1"	if BR2_x86_zen
-	default "znver2"	if BR2_x86_zen2
-	default "znver3"	if BR2_x86_zen3
-	default "znver4"	if BR2_x86_zen4
 	default "k6"		if BR2_x86_k6
 	default "k6-2"		if BR2_x86_k6_2
 	default "athlon"	if BR2_x86_athlon
@@ -23,7 +23,7 @@ ifeq ($(BR2_ARC_PAGE_SIZE_4K)$(BR2_ARM64_PAGE_SIZE_4K),y)
 ARCH_TOOLCHAIN_WRAPPER_OPTS += -Wl,-z,max-page-size=4096 -Wl,-z,common-page-size=4096
 else ifeq ($(BR2_ARC_PAGE_SIZE_8K),y)
 ARCH_TOOLCHAIN_WRAPPER_OPTS += -Wl,-z,max-page-size=8192 -Wl,-z,common-page-size=8192
-else ifeq ($(BR2_ARC_PAGE_SIZE_16K)$(BR2_ARM64_PAGE_SIZE_16K),y)
+else ifeq ($(BR2_ARC_PAGE_SIZE_16K),y)
 ARCH_TOOLCHAIN_WRAPPER_OPTS += -Wl,-z,max-page-size=16384 -Wl,-z,common-page-size=16384
 else ifeq ($(BR2_ARM64_PAGE_SIZE_64K),y)
 ARCH_TOOLCHAIN_WRAPPER_OPTS += -Wl,-z,max-page-size=65536 -Wl,-z,common-page-size=65536
@@ -26,9 +26,6 @@ endif
 ifeq ($(BR2_RISCV_ISA_RVC),y)
 GCC_TARGET_ARCH := $(GCC_TARGET_ARCH)c
 endif
-ifeq ($(BR2_RISCV_ISA_RVV),y)
-GCC_TARGET_ARCH := $(GCC_TARGET_ARCH)v
-endif

 # Starting from gcc 12.x, csr and fence instructions have been
 # separated from the base I instruction set, and special -march
@@ -4,12 +4,12 @@
 *  Copyright (C) 2014 Atmel,
 *		  2014 Nicolas Ferre <nicolas.ferre@atmel.com>
 * 
- *	2022 Sergio Tanzilli <tanzilli@acmesystems.it>
+ *	2020 Sergio Tanzilli <tanzilli@acmesystems.it>
 *
 * Licensed under GPLv2 or later.
 */
 /dts-v1/;
-#include "microchip/sama5d31.dtsi"
+#include "sama5d31.dtsi"

 / {
 	model = "Acme Systems Acqua SOM";
@@ -17,7 +17,7 @@

 	chosen {
 		stdout-path = "serial0:115200n8";
-		bootargs = "mem=256M console=ttyS0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait net.ifnames=0";
+		bootargs = "mem=256M console=ttyS0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait consoleblank=0";
 	};

 	memory {
@@ -128,19 +128,15 @@

 			i2c3@ {
 				compatible = "i2c-gpio";
-
-				sda-gpios = <&pioE 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-				scl-gpios = <&pioE 2 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; 
-				
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c3_gpio>;
-				
-				i2c-gpio,delay-us = <4>; /* ~178 kHz */
+				gpios = <&pioE 1 0 /* SDA */
+						 &pioE 2 0 /* SCK */
+						>;
+				i2c-gpio,delay-us = <4>;    /* ~178 kHz */
 				#address-cells = <1>;
 				#size-cells = <0>;
-				
+			
 				/* EEPROM contains the eth0 MAC address */
-				
+				 
 				eeprom@58 {
 					compatible = "atmel,24mac402";
 					pagesize = <256>;
@@ -153,7 +149,6 @@
 						reg = <0x0 0x06>;
 					};
 				};
-				
 			};

 			pwm0: pwm@f002c000 {
@@ -209,17 +204,6 @@
 			};

 			pinctrl@fffff200 {
-
-				atmel,mux-mask = <
-					/*   A          B          C  */
-					0xffffffff 0xc0fc0000 0xc0ff0000	/* pioA */
-					0xffffffff 0x0ff8ffff 0x00000000	/* pioB */
-					0xffffffff 0xbc00f1ff 0x7c00fc00	/* pioC */
-					0xffffffff 0xc001c0e0 0x0001c1e0	/* pioD */
-					0xfffffff9 0xbf9f8000 0x18000000 	/* pioE */
-				/*	0xffffffff 0xb8000000 0x18000000 */	/* pioE */
-					>;
-
 				board {
 					pinctrl_i2c0_pu: i2c0_pu {
 						atmel,pins =
@@ -233,13 +217,6 @@
 							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
 					};

-					pinctrl_i2c3_gpio: i2c3-gpio {
-						atmel,pins =
-							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
-							 AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-
-
 					pinctrl_key_gpio: key_gpio_0 {
 						atmel,pins =
 							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
@@ -259,20 +236,12 @@
 						atmel,pins =
 							<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PE9, conflicts with A9 */
 					};
-					
-					pinctrl_gpio_leds: gpio_leds_default {
-						atmel,pins =
-							<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
-							 AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
-							 AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
-							 AT91_PIOE 6 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
 				};
 			};
 		};

        usb0: gadget@500000 {
-            status = "disabled";
+            status = "okay";
        };

        usb1: ohci@600000 {
@@ -303,8 +272,6 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;

 		led0 {
 			label = "led0";
@@ -0,0 +1,274 @@
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	compatible = "andestech,ae350";
+	model = "andestech,ax45";
+	aliases {
+		uart0 = &serial0;
+		spi0 = &spi;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,38400n8 earlycon=sbi debug loglevel=7";
+		stdout-path = "uart0:38400n8";
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		timebase-frequency = <60000000>;
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			reg = <0>;
+			status = "okay";
+			compatible = "riscv";
+			riscv,isa = "rv64i2p0m2p0a2p0f2p0d2p0c2p0xv5-1p1xdsp0p0";
+			riscv,priv-major = <1>;
+			riscv,priv-minor = <10>;
+			mmu-type = "riscv,sv48";
+			clock-frequency = <60000000>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <256>;
+			i-cache-block-size = <64>;
+			i-cache-line-size = <64>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <128>;
+			d-cache-block-size = <64>;
+			d-cache-line-size = <64>;
+			next-level-cache = <&L2>;
+			CPU0_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				compatible = "riscv,cpu-intc";
+			};
+		};
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			reg = <1>;
+			status = "okay";
+			compatible = "riscv";
+			riscv,isa = "rv64i2p0m2p0a2p0f2p0d2p0c2p0xv5-1p1xdsp0p0";
+			riscv,priv-major = <1>;
+			riscv,priv-minor = <10>;
+			mmu-type = "riscv,sv48";
+			clock-frequency = <60000000>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <256>;
+			i-cache-block-size = <64>;
+			i-cache-line-size = <64>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <128>;
+			d-cache-block-size = <64>;
+			d-cache-line-size = <64>;
+			next-level-cache = <&L2>;
+			CPU1_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				compatible = "riscv,cpu-intc";
+			};
+		};
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			reg = <2>;
+			status = "okay";
+			compatible = "riscv";
+			riscv,isa = "rv64i2p0m2p0a2p0f2p0d2p0c2p0xv5-1p1xdsp0p0";
+			riscv,priv-major = <1>;
+			riscv,priv-minor = <10>;
+			mmu-type = "riscv,sv48";
+			clock-frequency = <60000000>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <256>;
+			i-cache-block-size = <64>;
+			i-cache-line-size = <64>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <128>;
+			d-cache-block-size = <64>;
+			d-cache-line-size = <64>;
+			next-level-cache = <&L2>;
+			CPU2_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				compatible = "riscv,cpu-intc";
+			};
+		};
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			reg = <3>;
+			status = "okay";
+			compatible = "riscv";
+			riscv,isa = "rv64i2p0m2p0a2p0f2p0d2p0c2p0xv5-1p1xdsp0p0";
+			riscv,priv-major = <1>;
+			riscv,priv-minor = <10>;
+			mmu-type = "riscv,sv48";
+			clock-frequency = <60000000>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <256>;
+			i-cache-block-size = <64>;
+			i-cache-line-size = <64>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <128>;
+			d-cache-block-size = <64>;
+			d-cache-line-size = <64>;
+			next-level-cache = <&L2>;
+			CPU3_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				compatible = "riscv,cpu-intc";
+			};
+		};
+	};
+	L2: l2-cache@e0500000 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-size = <0x80000>;
+		reg = <0x00000000 0xe0500000 0x00000000 0x00001000>;
+		andes,inst-prefetch = <3>;
+		andes,data-prefetch = <3>;
+		// The value format is <XRAMOCTL XRAMICTL>
+		andes,tag-ram-ctl = <0 0>;
+		andes,data-ram-ctl = <0 0>;
+	};
+	memory@0 {
+		reg = <0x00000000 0x00000000 0x00000000 0x80000000>;
+		device_type = "memory";
+	};
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "andestech,riscv-ae350-soc", "simple-bus";
+		ranges;
+		plic0: interrupt-controller@e4000000 {
+			compatible = "riscv,plic0";
+			reg = <0x00000000 0xe4000000 0x00000000 0x02000000>;
+			interrupts-extended = < &CPU0_intc 11 &CPU0_intc 9 &CPU1_intc 11 &CPU1_intc 9 &CPU2_intc 11 &CPU2_intc 9 &CPU3_intc 11 &CPU3_intc 9>;
+			interrupt-controller;
+			#address-cells = <2>;
+			#interrupt-cells = <2>;
+			riscv,ndev = <71>;
+		};
+		plic1: interrupt-controller@e6400000 {
+			compatible = "riscv,plic1";
+			reg = <0x00000000 0xe6400000 0x00000000 0x00400000>;
+			interrupts-extended = < &CPU0_intc 3 &CPU1_intc 3 &CPU2_intc 3 &CPU3_intc 3>;
+			interrupt-controller;
+			#address-cells = <2>;
+			#interrupt-cells = <2>;
+			riscv,ndev = <4>;
+		};
+		plmt0: plmt0@e6000000 {
+			compatible = "riscv,plmt0";
+			reg = <0x00000000 0xe6000000 0x00000000 0x00100000>;
+			interrupts-extended = < &CPU0_intc 7 &CPU1_intc 7 &CPU2_intc 7 &CPU3_intc 7>;
+		};
+		spiclk: virt_100mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <100000000>;
+		};
+		timer0: timer@f0400000 {
+			compatible = "andestech,atcpit100";
+			reg = <0x00000000 0xf0400000 0x00000000 0x00001000>;
+			interrupts = <3 4>;
+			interrupt-parent = <&plic0>;
+			clock-frequency = <60000000>;
+		};
+		pwm: pwm@f0400000 {
+			compatible = "andestech,atcpit100-pwm";
+			reg = <0x00000000 0xf0400000 0x00000000 0x00001000>;
+			interrupts = <3 4>;
+			interrupt-parent = <&plic0>;
+			clock-frequency = <60000000>;
+			pwm-cells = <2>;
+		};
+		wdt: wdt@f0500000 {
+			compatible = "andestech,atcwdt200";
+			reg = <0x00000000 0xf0500000 0x00000000 0x00001000>;
+			interrupts = <3 4>;
+			interrupt-parent = <&plic0>;
+			clock-frequency = <15000000>;
+		};
+		serial0: serial@f0300000 {
+			compatible = "andestech,uart16550", "ns16550a";
+			reg = <0x00000000 0xf0300000 0x00000000 0x00001000>;
+			interrupts = <9 4>;
+			interrupt-parent = <&plic0>;
+			clock-frequency = <19660800>;
+			reg-shift = <2>;
+			reg-offset = <32>;
+			no-loopback-test = <1>;
+		};
+		rtc0: rtc@f0600000 {
+			compatible = "andestech,atcrtc100";
+			reg = <0x00000000 0xf0600000 0x00000000 0x00001000>;
+			interrupts = <1 4 2 4>;
+			interrupt-parent = <&plic0>;
+			wakeup-source;
+		};
+		gpio: gpio@f0700000 {
+			compatible = "andestech,atcgpio100";
+			reg = <0x00000000 0xf0700000 0x00000000 0x00001000>;
+			interrupts = <7 4>;
+			interrupt-parent = <&plic0>;
+			wakeup-source;
+		};
+		mac0: mac@e0100000 {
+			compatible = "andestech,atmac100";
+			reg = <0x00000000 0xe0100000 0x00000000 0x00001000>;
+			interrupts = <19 4>;
+			interrupt-parent = <&plic0>;
+			dma-coherent;
+		};
+		smu: smu@f0100000 {
+			compatible = "andestech,atcsmu";
+			reg = <0x00000000 0xf0100000 0x00000000 0x00001000>;
+		};
+		mmc0: mmc@f0e00000 {
+			compatible = "andestech,atfsdc010";
+			reg = <0x00000000 0xf0e00000 0x00000000 0x00001000>;
+			interrupts = <18 4>;
+			interrupt-parent = <&plic0>;
+			clock-freq-min-max = <400000 100000000>;
+			max-frequency = <100000000>;
+			fifo-depth = <16>;
+			cap-sd-highspeed;
+			dma-coherent;
+		};
+		dma0: dma@f0c00000 {
+			compatible = "andestech,atcdmac300";
+			reg = <0x00000000 0xf0c00000 0x00000000 0x00001000>;
+			interrupts = <10 4 64 4 65 4 66 4 67 4 68 4 69 4 70 4 71 4>;
+			interrupt-parent = <&plic0>;
+			dma-channels = <8>;
+		};
+		lcd0: lcd@e0200000 {
+			compatible = "andestech,atflcdc100";
+			reg = <0x00000000 0xe0200000 0x00000000 0x00001000>;
+			interrupts = <20 4>;
+			interrupt-parent = <&plic0>;
+			dma-coherent;
+		};
+		pmu: pmu {
+			compatible = "riscv,andes-pmu";
+			device_type = "pmu";
+		};
+		spi: spi@f0b00000 {
+			compatible = "andestech,atcspi200";
+			reg = <0x00000000 0xf0b00000 0x00000000 0x00001000>;
+			interrupts = <4 4>;
+			interrupt-parent = <&plic0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			num-cs = <1>;
+			clocks = <&spiclk>;
+			flash@0 {
+				compatible = "jedec,spi-nor";
+				reg = <0x00000000>;
+				spi-max-frequency = <50000000>;
+				spi-cpol;
+				spi-cpha;
+			};
+		};
+	};
+};
@@ -3,7 +3,7 @@ image boot.vfat {
 		files = {
 			"u-boot-spl.bin",
 			"u-boot.itb",
-			"ae350_ax45mp.dtb",
+			"ae350.dtb",
 		}
 	}
 	size = 2M
@@ -0,0 +1,29 @@
+From 3ccb71eeca42dbcd5e4d00ae1877a489ae82598d Mon Sep 17 00:00:00 2001
+From: Yu Chien Peter Lin <peterlin@andestech.com>
+Date: Wed, 29 Dec 2021 16:04:54 +0800
+Subject: [PATCH] Disable PIC explicitly for assembling
+
+This patch is necessary if the fw_dynamic load address
+is not equal to link address.
+However, they are equal currently, since we include an u-boot
+patch for preventing fw_dynamic relocation.
+
+Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
+---
+ Makefile | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/Makefile b/Makefile
+index d6f097d..441518d 100644
+--- a/Makefile
+++ b/Makefile
+@@ -225,6 +225,7 @@ ASFLAGS		+=	-mcmodel=$(PLATFORM_RISCV_CODE_MODEL)
+ ASFLAGS		+=	$(GENFLAGS)
+ ASFLAGS		+=	$(platform-asflags-y)
+ ASFLAGS		+=	$(firmware-asflags-y)
+ASFLAGS		+=	-fno-pic
+
+ ARFLAGS		=	rcs
+
+--
+2.25.1
@@ -0,0 +1,25 @@
+From 325328f4204b40b1fcc8db3b46c7c8805710d21c Mon Sep 17 00:00:00 2001
+From: Yu Chien Peter Lin <peterlin@andestech.com>
+Date: Thu, 30 Dec 2021 08:47:34 +0800
+Subject: [PATCH] Enable cache for opensbi jump mode
+
+Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
+---
+ firmware/fw_base.S | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/firmware/fw_base.S b/firmware/fw_base.S
+index ab33e11..155d230 100644
+--- a/firmware/fw_base.S
+++ b/firmware/fw_base.S
+@@ -46,6 +46,8 @@
+	.globl _start
+	.globl _start_warm
+ _start:
+	li t0, 0x80003
+	csrw  0x7ca, t0
+	/* Find preferred boot HART id */
+	MOV_3R	s0, a0, s1, a1, s2, a2
+	call	fw_boot_hart
+--
+2.25.1
@@ -0,0 +1,27 @@
+From ea4675215b53d16a72d29b8a6fc6a86cccf59cf0 Mon Sep 17 00:00:00 2001
+From: Yu Chien Peter Lin <peterlin@andestech.com>
+Date: Wed, 5 Jan 2022 11:00:59 +0800
+Subject: [PATCH] Fix mmc no partition table error
+
+Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
+---
+ drivers/mmc/ftsdc010_mci.c | 4 ----
+ 1 file changed, 4 deletions(-)
+
+diff --git a/drivers/mmc/ftsdc010_mci.c b/drivers/mmc/ftsdc010_mci.c
+index 570d54cf..3b1e0aa0 100644
+--- a/drivers/mmc/ftsdc010_mci.c
+++ b/drivers/mmc/ftsdc010_mci.c
+@@ -438,10 +438,6 @@ static int ftsdc010_mmc_probe(struct udevice *dev)
+		return ret;
+ #endif
+
+-	if (dev_read_bool(dev, "cap-mmc-highspeed") || \
+-		  dev_read_bool(dev, "cap-sd-highspeed"))
+-		chip->caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz;
+-
+	ftsdc_setup_cfg(&plat->cfg, dev->name, chip->buswidth, chip->caps,
+			priv->minmax[1] , priv->minmax[0]);
+	chip->mmc = &plat->mmc;
+--
+2.25.1
@@ -1,38 +0,0 @@
-From 16aad5594e08550295ea3c12c1c9ed6f64774748 Mon Sep 17 00:00:00 2001
-From: Rick Chen <rick@andestech.com>
-Date: Tue, 29 Mar 2022 13:41:10 +0800
-Subject: [PATCH] mmc: ftsdc010_mci: Support DTS of ftsdc010 driver for
- generic dma
-
-The ftsdc010 driver has been implemented for generic dma in Linux
-kernel. And its compatible is andestech,atfsdc010g to distinguish
-the legacy andestech,atfsdc010 which is not for generic dma.
-
-Althought the ftsdc010_mci driver in U-Boot does not use dma, but
-it still can work well with the mmc node for generic dma. So add
-the compatible string to support it.
-
-Signed-off-by: Rick Chen <rick@andestech.com>
-
-Upstream-Status: Pending
-
-Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
---
- drivers/mmc/ftsdc010_mci.c | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/drivers/mmc/ftsdc010_mci.c b/drivers/mmc/ftsdc010_mci.c
-index 570d54cf9d..65b1d447a8 100644
--- a/drivers/mmc/ftsdc010_mci.c
-+++ b/drivers/mmc/ftsdc010_mci.c
-@@ -460,6 +460,7 @@ int ftsdc010_mmc_bind(struct udevice *dev)
- 
- static const struct udevice_id ftsdc010_mmc_ids[] = {
- 	{ .compatible = "andestech,atfsdc010" },
-+	{ .compatible = "andestech,atfsdc010g" },
- 	{ }
- };
- 
-- 
-2.34.1
-
@@ -0,0 +1,27 @@
+From 4c0c5378d032f2f95577585935624baf7b4decf3 Mon Sep 17 00:00:00 2001
+From: Yu Chien Peter Lin <peterlin@andestech.com>
+Date: Wed, 5 Jan 2022 11:02:26 +0800
+Subject: [PATCH] Prevent fw_dynamic from relocation
+
+This patch prevents OpenSBI relocation, load fw_dynamic to link address
+
+Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
+---
+ board/AndesTech/ax25-ae350/Kconfig | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/board/AndesTech/ax25-ae350/Kconfig b/board/AndesTech/ax25-ae350/Kconfig
+index e50f505a..385c4c11 100644
+--- a/board/AndesTech/ax25-ae350/Kconfig
+++ b/board/AndesTech/ax25-ae350/Kconfig
+@@ -25,7 +25,7 @@ config SPL_TEXT_BASE
+	default 0x800000
+
+ config SPL_OPENSBI_LOAD_ADDR
+-	default 0x01000000
+	default 0x0
+
+ config BOARD_SPECIFIC_OPTIONS # dummy
+	def_bool y
+--
+2.25.1
@@ -1,42 +0,0 @@
-From 933ad8a59f7fd9b2088badc3e97167d750a40b5a Mon Sep 17 00:00:00 2001
-From: Bin Meng <bmeng.cn@gmail.com>
-Date: Mon, 12 Jul 2021 11:52:31 +0800
-Subject: [PATCH] spl: Align device tree blob address at 8-byte boundary
-
-Since libfdt v1.6.1, a new requirement on the device tree address via:
-
-  commit 5e735860c478 ("libfdt: Check for 8-byte address alignment in fdt_ro_probe_()")
-
-must be met that the device tree must be loaded in to memory at an
-8-byte aligned address.
-
-Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
-
-This patch was imported from U-boot patchwork:
-https://patchwork.ozlabs.org/project/uboot/patch/20210712035231.26475-1-bmeng.cn@gmail.com/
-
-Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
---
- common/spl/spl_fit.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
-diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
-index a35be529..a76ad14a 100644
--- a/common/spl/spl_fit.c
-+++ b/common/spl/spl_fit.c
-@@ -382,6 +382,12 @@ static int spl_fit_append_fdt(struct spl_image_info *spl_image,
- 	 */
- 	image_info.load_addr = spl_image->load_addr + spl_image->size;
- 
-+	/*
-+	 * Since libfdt v1.6.1, the device tree must be loaded in to memory
-+	 * at an 8-byte aligned address.
-+	 */
-+	image_info.load_addr = roundup(image_info.load_addr, 8);
-+
- 	/* Figure out which device tree the board wants to use */
- 	node = spl_fit_get_image_node(ctx, FIT_FDT_PROP, index++);
- 	if (node < 0) {
-- 
-2.34.1
-
@@ -0,0 +1,26 @@
+From 3d09501175ae6f5e3f6520b48b1358226a99ff16 Mon Sep 17 00:00:00 2001
+From: Yu Chien Peter Lin <peterlin@andestech.com>
+Date: Wed, 5 Jan 2022 18:17:39 +0800
+Subject: [PATCH] Fix u-boot proper booting issue
+
+Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
+---
+ arch/riscv/cpu/start.S | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S
+index 76850ec9..2ccda4f5 100644
+--- a/arch/riscv/cpu/start.S
+++ b/arch/riscv/cpu/start.S
+@@ -139,7 +139,9 @@ call_harts_early_init:
+	 * accesses gd).
+	 */
+	mv	gp, s0
+#if !CONFIG_IS_ENABLED(RISCV_SMODE)
+	bnez	tp, secondary_hart_loop
+#endif
+ #endif
+
+	jal	board_init_f_init_reserve
+--
+2.25.1
@@ -0,0 +1,25 @@
+From 3847a959ac4c07facbd80104ca5fa6a91fad5f35 Mon Sep 17 00:00:00 2001
+From: Yu Chien Peter Lin <peterlin@andestech.com>
+Date: Thu, 6 Jan 2022 13:50:07 +0800
+Subject: [PATCH] Enable printing OpenSBI boot logo
+
+Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
+---
+ include/opensbi.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/include/opensbi.h b/include/opensbi.h
+index d812cc8c..91fb8fd9 100644
+--- a/include/opensbi.h
+++ b/include/opensbi.h
+@@ -20,7 +20,7 @@
+
+ enum sbi_scratch_options {
+	/** Disable prints during boot */
+-	SBI_SCRATCH_NO_BOOT_PRINTS = (1 << 0),
+	SBI_SCRATCH_NO_BOOT_PRINTS = 0,
+ };
+
+ /** Representation dynamic info passed by previous booting stage */
+--
+2.25.1
@@ -1,3 +1,3 @@
 #!/bin/sh
 cp $BINARIES_DIR/Image $TARGET_DIR/boot
-cp $BINARIES_DIR/ae350_ax45mp.dtb $TARGET_DIR/boot
+cp $BINARIES_DIR/ae350.dtb $TARGET_DIR/boot
@@ -30,10 +30,12 @@ Result of the build
 After building, you should obtain the following files:

  output/images/
-  |-- ae350_ax45mp.dtb
+  |-- ae350.dtb
  |-- boot.vfat
  |-- fw_dynamic.bin
  |-- fw_dynamic.elf
+  |-- fw_jump.bin
+  |-- fw_jump.elf
  |-- Image
  |-- rootfs.ext2
  |-- rootfs.ext4 -> rootfs.ext2
@@ -1,4 +1,4 @@
 label linux
   kernel /boot/Image
-   fdt /boot/ae350_ax45mp.dtb
+   fdt /boot/ae350.dtb
   append earlycon=sbi root=/dev/mmcblk0p2 rootwait
@@ -1,7 +1,5 @@
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_MMC=y
 # CONFIG_SPL_RAM_SUPPORT is not set
-CONFIG_SPL_OPENSBI_LOAD_ADDR=0x0
-CONFIG_SPL_OPENSBI_SCRATCH_OPTIONS=0x0
-CONFIG_DISPLAY_CPUINFO=y
-CONFIG_DISPLAY_BOARDINFO=y
+# CONFIG_OF_BOARD is not set
+CONFIG_OF_SEPARATE=y
@@ -3,14 +3,14 @@ ARM software simulator of the AArch64 architecture.

 First, one has to download the AArch64 software simulator from:

-  https://armkeil.blob.core.windows.net/developer/Files/downloads/ecosystem-models/Foundation_Platform_11.20_15_Linux64.tgz
+  https://silver.arm.com/download/download.tm?pv=4807186

 Then, use the arm_foundationv8_defconfig configuration to build your
 Buildroot system.

 Finally, boot your system with:

- ${LOCATION_OF_FOUNDATIONV8_SIMULATOR}/models/Linux64_GCC-9.3/Foundation_Platform \
+ ${LOCATION_OF_FOUNDATIONV8_SIMULATOR}/models/Linux64_GCC-6.4/Foundation_Platform \
    --image output/images/linux-system.axf \
    --block-device output/images/rootfs.ext2 \
    --network=nat \
@@ -1,51 +0,0 @@
-From 336dc301e02d64507447f82020ce7a349797bef3 Mon Sep 17 00:00:00 2001
-From: Peter Korsgaard <peter@korsgaard.com>
-Date: Sun, 5 Nov 2023 14:59:16 +0100
-Subject: [PATCH] stm32mp157a-avenger96.dts: enable hash device to unbreak boot
- issue
-
-The avenger96 board was forgotten when authentication support was added with
-commit 4bdb1a7a6a1325343 (stm32mp1: add authentication support for
-stm32image), causing a panic when stm32mp_init_auth() is called, so fix it
-similar to how it was done for the STM32MP157C-ED1 board with:
-
-commit b37b52ef8bc05bfd8dcca992d4ba84cd7c5d23bb
-Author: Yann Gautier <yann.gautier@st.com>
-Date:   Tue Oct 13 18:05:06 2020 +0200
-
-    fdts: add missing hash node in STM32MP157C-ED1 board DT
-
-    Without this node, the board fails to boot and panics in the function
-    stm32mp_init_auth().
-
-    Change-Id: Ia54924410dac2a8c94dd6e45d7e93977fe7d87e2
-    Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
-Upstream: N/A - Upstream reworked authentication to skip it for MP157A
- variant since v2.7, see "feat(st): disable authentication based on
- part_number"
- (https://github.com/ARM-software/arm-trusted-firmware/commit/49abdfd8cececb91a4bc7e7b29a30c09dce461c7)
-
-Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
---
- fdts/stm32mp157a-avenger96.dts | 4 ++++
- 1 file changed, 4 insertions(+)
-
-diff --git a/fdts/stm32mp157a-avenger96.dts b/fdts/stm32mp157a-avenger96.dts
-index b967736e4..76edecb83 100644
--- a/fdts/stm32mp157a-avenger96.dts
-+++ b/fdts/stm32mp157a-avenger96.dts
-@@ -271,6 +271,10 @@
- 	};
- };
- 
-+&hash1 {
-+	status = "okay";
-+};
-+
- &rng1 {
- 	status = "okay";
- };
-- 
-2.39.2
-
@@ -1,4 +0,0 @@
-label Tinker linux
-  kernel /boot/zImage
-  devicetree /boot/rk3288-tinker-s.dtb
-  append console=ttyS2,115200n8 root=179:1 rootwait
@@ -1,9 +0,0 @@
-#!/bin/sh
-
-MKIMAGE=$HOST_DIR/bin/mkimage
-BOARD_DIR="$(dirname "$0")"
-
-$MKIMAGE -n rk3288 -T rksd -d "$BINARIES_DIR"/u-boot-tpl.bin "$BINARIES_DIR"/u-boot-tpl.img
-cat "$BINARIES_DIR"/u-boot-tpl.img "$BINARIES_DIR"/u-boot-spl-dtb.bin > "$BINARIES_DIR"/u-boot-tpl-spl-dtb.img
-
-install -m 0644 -D "$BOARD_DIR"/extlinux.conf "$TARGET_DIR"/boot/extlinux/extlinux.conf
@@ -1,43 +0,0 @@
-Tinker S RK3288
-=============
-
-Tinker Board is a Single Board Computer (SBC) in an ultra-small form
-factor that offers class-leading performance while leveraging outstanding
-mechanical compatibility. The "S" variant of the Tinker Board has eMMC
-
-Tinker link:
-https://www.asus.com/br/motherboards-components/single-board-computer/all-series/tinker-board-s/
-
-Wiki link:
-https://openedev.amarulasolutions.com/display/ODWIKI/Tinker+RK3288
-
-How to build it
-===============
-
-  $ make asus_tinker-s_rk3288_defconfig
-
-Then you can edit the build options using
-
-  $ make menuconfig
-
-Compile all and build rootfs image:
-
-  $ make
-
-Prepare your SDCard
-===================
-
-Buildroot generates a ready-to-use SD card image that you can flash directly to
-the card. The image will be in output/images/sdcard.img.
-You can write this image directly to an SD card device (i.e. /dev/xxx):
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/xxx
-  $ sudo sync
-
-Finally, you can insert the SD card to the Tinker RK3288 board and boot it.
-
-NOTE:
-USB power supply requires more than the standard 500mA USB current, so
-this board must be supplied from a capable port or from an external
-AC/DC adapter. Otherwise it will hang forever while loading the kernel
-image.
@@ -1,4 +1,4 @@
-label Tinker linux
-  kernel /boot/zImage
+label Tinker linux-next
+  kernel /boot/uImage
  devicetree /boot/rk3288-tinker.dtb
  append console=ttyS2,115200n8 root=/dev/mmcblk0p1 rootwait
@@ -2,19 +2,12 @@ image sdcard.img {
 	hdimage {
 	}

-	partition u-boot-tpl-spl-dtb {
+	partition u-boot-spl-dtb {
 		in-partition-table = "no"
-		image = "u-boot-tpl-spl-dtb.img"
+		image = "u-boot-spl-dtb.img"
 		offset = 32K
 	}

-	partition u-boot-dtb {
-		in-partition-table = "no"
-		image = "u-boot-dtb.img"
-		offset = 8M
-		size = 30M
-	}
-
 	partition rootfs {
 		partition-type = 0x83
 		image = "rootfs.ext4"
@@ -3,7 +3,7 @@
 MKIMAGE=$HOST_DIR/bin/mkimage
 BOARD_DIR="$(dirname $0)"

-$MKIMAGE -n rk3288 -T rksd -d $BINARIES_DIR/u-boot-tpl.bin $BINARIES_DIR/u-boot-tpl.img
-cat $BINARIES_DIR/u-boot-tpl.img $BINARIES_DIR/u-boot-spl-dtb.bin > $BINARIES_DIR/u-boot-tpl-spl-dtb.img
+$MKIMAGE -n rk3288 -T rksd -d $BINARIES_DIR/u-boot-spl-dtb.bin $BINARIES_DIR/u-boot-spl-dtb.img
+cat $BINARIES_DIR/u-boot-dtb.bin >> $BINARIES_DIR/u-boot-spl-dtb.img

 install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
@@ -35,9 +35,3 @@ You can write this image directly to an SD card device (i.e. /dev/xxx):
  $ sudo sync

 Finally, you can insert the SD card to the Tinker RK3288 board and boot it.
-
-NOTE:
-USB power supply requires more than the standard 500mA USB current, so
-this board must be supplied from a capable port or from an external
-AC/DC adapter. Otherwise it will hang forever while loading the kernel
-image.
@@ -1,29 +0,0 @@
-# SD card image for RZBoard V2L
-
-image boot.vfat {
-	vfat {
-		files = {
-			"Image",
-			"rzboard.dtb",
-			"uEnv.txt"
-		}
-	}
-	size = 24M
-}
-
-image sdcard.img {
-	hdimage {
-		partition-table-type = "hybrid"
-	}
-
-	partition boot {
-		partition-type = "0xC"
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext2"
-	}
-}
@@ -1,5 +0,0 @@
-#!/usr/bin/env bash
-set -e
-
-cp board/avnet/rzboard_v2l/uEnv.txt "${BINARIES_DIR}"
-support/scripts/genimage.sh -c board/avnet/rzboard_v2l/genimage.cfg
@@ -1,71 +0,0 @@
-RZBoard V2L
-===========
-
-https://www.avnet.com/wps/portal/us/products/avnet-boards/avnet-board-families/rzboard-v2l/
-
-This board support creates a bootable sd card image for the AVNET RZBoard V2L.
-This board is shipped with a u-boot inside its eMMC. This board support uses
-that u-boot and only puts uEnv.txt, kernel image and rootfs onto the sd card.
-
-Build:
-======
-
-  $ make rzboard_v2l_defconfig
-  $ make
-
-Files created in output directory
-=================================
-
-output/images
-.
-├── Image
-├── boot.vfat
-├── rootfs.ext2
-├── rootfs.ext4
-├── rootfs.tar
-├── rzboard.dtb
-├── sdcard.img
-└── uEnv.txt
-
-Creating bootable SD card:
-==========================
-
-Simply invoke (as root)
-
-sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
-
-Where X is your SD card device.
-
-Booting:
-========
-
-Configure board for sd card boot:
---------------------------------
-Set the 'BOOT1' switch (next to the audio jack) to '1' (away from 'ON') in
-order to let the board boot kernel and rootfs from SD card.
-
-Serial console:
---------------
-The RZBoard V2L has a 4-pin header "J19" right next to the micro USB. Its
-layout can be seen in the Quick-Start Guide, or the Hardware User Guide,
-obtainable from:
-https://www.avnet.com/wps/portal/us/products/avnet-boards/avnet-board-families/rzboard-v2l/
-
-The uart pins are as follows (from left to right - orientation according to the
-board's labeling):
-
-pin 1: n/a  (most away from the board's corner)
-pin 2: tx
-pin 3: rx
-pin 4: gnd  (nearest to the board's corner)
-
-Baudrate for this board is 115200.
-
-Power-Up:
---------
-Plug in a suitable USB-C power supply and press the button 'S1' (next to the
-USB-C port) for 2 seconds until the LED goes on.
-
-Login:
------
-Enter 'root' as login user, and the prompt is ready.
@@ -1,3 +0,0 @@
-bootcmd=booti ${kernel_addr_r} - ${fdt_addr_r}
-uenvcmd=fatload mmc 0:1 ${kernel_addr_r} Image; fatload mmc 0:1 ${fdt_addr_r} rzboard.dtb
-bootargs=root=/dev/mmcblk0p2 rw rootfstype=ext4 earlyprintk console=ttyS0,115200 rootwait earlycon clk_ignore_unused debug
@@ -1,4 +0,0 @@
-label Bananapi M2 Berry linux
-  kernel /boot/zImage
-  devicetree /boot/sun8i-v40-bananapi-m2-berry.dtb
-  append console=ttyS0,115200n8 root=/dev/mmcblk0p1 rootwait
@@ -1,16 +0,0 @@
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot-sunxi-with-spl.bin"
-		offset = 8K
-		size = 1016K # 1MB - 8KB
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
@@ -1,6 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname "$0")"
-
-install -m 644 -D "${BOARD_DIR}"/extlinux.conf \
-	"${TARGET_DIR}"/boot/extlinux/extlinux.conf
@@ -1,35 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Bananapi M2 Berry. With the current
-configuration it will bring-up the board, and allow access through the
-serial console.
-
-Bananapi M2 Berry link:
-https://wiki.banana-pi.org/Banana_Pi_BPI-M2_Berry
-
-This configuration uses U-Boot mainline and kernel mainline.
-
-How to build
-============
-
-    $ make bananapi_m2_berry_defconfig
-    $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
-  $ sudo sync
-
-Insert the micro SDcard in your Bananapi M2 Berry and power it up. The console
-is on the serial line, 115200 8N1.
@@ -1,5 +1,7 @@
-setenv fdt_high ffffffff
 setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
+
+mmc dev 0
 fatload mmc 0 $kernel_addr_r zImage
-fatload mmc 0 $fdt_addr_r sun7i-a20-icnova-a20-adb4006.dtb
+fatload mmc 0 $fdt_addr_r sun8i-r40-bananapi-m2-ultra.dtb
+
 bootz $kernel_addr_r - $fdt_addr_r
@@ -1,4 +0,0 @@
-label Bananapi M2 Ultra linux
-  kernel /boot/zImage
-  devicetree /boot/sun8i-r40-bananapi-m2-ultra.dtb
-  append console=ttyS0,115200n8 root=/dev/mmcblk0p1 rootwait
@@ -1,3 +1,15 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"zImage",
+			"sun8i-r40-bananapi-m2-ultra.dtb",
+			"boot.scr"
+		}
+	}
+
+	size = 64M
+}
+
 image sdcard.img {
 	hdimage {
 	}
@@ -9,6 +21,12 @@ image sdcard.img {
 		size = 1016K # 1MB - 8KB
 	}

+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
 	partition rootfs {
 		partition-type = 0x83
 		image = "rootfs.ext4"
@@ -1,6 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname "$0")"
-
-install -m 644 -D "${BOARD_DIR}"/extlinux.conf \
-	"${TARGET_DIR}"/boot/extlinux/extlinux.conf
@@ -1,4 +0,0 @@
-label beaglebone-buildroot
-  kernel /zImage
-  fdtdir /
-  append console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait
@@ -11,8 +11,6 @@ image boot.vfat {
 			"am335x-boneblack.dtb",
 			"am335x-bonegreen.dtb",
 			"am335x-boneblack-wireless.dtb",
-			"am335x-bonegreen-wireless.dtb",
-			"extlinux"
 		}
 	}

@@ -2,5 +2,3 @@
 BOARD_DIR="$(dirname $0)"

 cp $BOARD_DIR/uEnv.txt $BINARIES_DIR/uEnv.txt
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
@@ -28,10 +28,6 @@ Result of the build
 ===================
 output/images/
 +-- am335x-boneblack.dtb
-+-- am335x-boneblack-wireless.dtb
-+-- am335x-boneblue.dtb
-+-- am335x-bonegreen.dtb
-+-- am335x-bonegreen-wireless.dtb
 +-- am335x-bone.dtb
 +-- am335x-evm.dtb
 +-- am335x-evmsk.dtb
@@ -1,58 +0,0 @@
-From 0cf11f3c0478f4286adcfb09bf9137f8b00212e3 Mon Sep 17 00:00:00 2001
-From: Alexandre Ghiti <alexandre.ghiti@canonical.com>
-Date: Mon, 3 Oct 2022 18:07:54 +0200
-Subject: [PATCH] riscv: Fix build against binutils 2.38
-
-The following description is copied from the equivalent patch for the
-Linux Kernel proposed by Aurelien Jarno:
-
->From version 2.38, binutils default to ISA spec version 20191213. This
-means that the csr read/write (csrr*/csrw*) instructions and fence.i
-instruction has separated from the `I` extension, become two standalone
-extensions: Zicsr and Zifencei. As the kernel uses those instruction,
-this causes the following build failure:
-
-arch/riscv/cpu/mtrap.S: Assembler messages:
-arch/riscv/cpu/mtrap.S:65: Error: unrecognized opcode `csrr a0,scause'
-arch/riscv/cpu/mtrap.S:66: Error: unrecognized opcode `csrr a1,sepc'
-arch/riscv/cpu/mtrap.S:67: Error: unrecognized opcode `csrr a2,stval'
-arch/riscv/cpu/mtrap.S:70: Error: unrecognized opcode `csrw sepc,a0'
-
-Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
-Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
-Tested-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
-Tested-by: Heiko Stuebner <heiko@sntech.de>
-Tested-by: Christian Stewart <christian@paral.in>
-Reviewed-by: Rick Chen <rick@andestech.com>
-(cherry picked from commit 1dde977518f13824b847e23275001191139bc384)
-Upstream: https://gitlab.com/u-boot/u-boot/-/commit/1dde977518f13824b847e23275001191139bc384
-Signed-off-by: Romain Naour <romain.naour@gmail.com>
---
- arch/riscv/Makefile | 11 ++++++++++-
- 1 file changed, 10 insertions(+), 1 deletion(-)
-
-diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
-index 0b80eb8d864..53d1194ffb6 100644
--- a/arch/riscv/Makefile
-+++ b/arch/riscv/Makefile
-@@ -24,7 +24,16 @@ ifeq ($(CONFIG_CMODEL_MEDANY),y)
- 	CMODEL = medany
- endif
- 
-ARCH_FLAGS = -march=$(ARCH_BASE)$(ARCH_A)$(ARCH_C) -mabi=$(ABI) \
-+RISCV_MARCH = $(ARCH_BASE)$(ARCH_A)$(ARCH_C)
-+
-+# Newer binutils versions default to ISA spec version 20191213 which moves some
-+# instructions from the I extension to the Zicsr and Zifencei extensions.
-+toolchain-need-zicsr-zifencei := $(call cc-option-yn, -mabi=$(ABI) -march=$(RISCV_MARCH)_zicsr_zifencei)
-+ifeq ($(toolchain-need-zicsr-zifencei),y)
-+	RISCV_MARCH := $(RISCV_MARCH)_zicsr_zifencei
-+endif
-+
-+ARCH_FLAGS = -march=$(RISCV_MARCH) -mabi=$(ABI) \
- 	     -mcmodel=$(CMODEL)
- 
- PLATFORM_CPPFLAGS	+= $(ARCH_FLAGS)
-- 
-2.41.0
-
@@ -27,9 +27,8 @@ build_trx() {
 	rm -f $images/zImage.$device.lzma
 }

-devices="$(sed -n 's/^BR2_LINUX_KERNEL_INTREE_DTS_NAME="\([^"]*\)"$/\1/p' ${BR2_CONFIG})"
+devices="$(sed -n 's/^BR2_LINUX_KERNEL_INTREE_DTS_NAME="\([a-z0-9 \-]*\)"$/\1/p' ${BR2_CONFIG})"
 for device in $devices; do
-	device="${device#broadcom/}"
 	case "$device" in
 		"bcm4708-smartrg-sr400ac")
 			build_trx "$1" "$device"
@@ -1,895 +0,0 @@
-# CONFIG_BPF_SYSCALL is not set
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_CGROUP_FREEZER=y
-# CONFIG_CGROUP_BPF is not set
-CONFIG_RELAY=y
-# CONFIG_ARCH_ACTIONS is not set
-# CONFIG_ARCH_SUNXI is not set
-# CONFIG_ARCH_ALPINE is not set
-# CONFIG_ARCH_APPLE is not set
-# CONFIG_ARCH_BCM2835 is not set
-# CONFIG_ARCH_BCM4908 is not set
-# CONFIG_ARCH_BCM_IPROC is not set
-# CONFIG_ARCH_BERLIN is not set
-# CONFIG_ARCH_BRCMSTB is not set
-# CONFIG_ARCH_EXYNOS is not set
-# CONFIG_ARCH_K3 is not set
-# CONFIG_ARCH_LAYERSCAPE is not set
-# CONFIG_ARCH_LG1K is not set
-# CONFIG_ARCH_HISI is not set
-# CONFIG_ARCH_KEEMBAY is not set
-# CONFIG_ARCH_MEDIATEK is not set
-# CONFIG_ARCH_MESON is not set
-# CONFIG_ARCH_MVEBU is not set
-# CONFIG_ARCH_QCOM is not set
-# CONFIG_ARCH_RENESAS is not set
-# CONFIG_ARCH_ROCKCHIP is not set
-# CONFIG_ARCH_S32 is not set
-# CONFIG_ARCH_SEATTLE is not set
-# CONFIG_ARCH_INTEL_SOCFPGA is not set
-# CONFIG_ARCH_SYNQUACER is not set
-# CONFIG_ARCH_TEGRA is not set
-# CONFIG_ARCH_TESLA_FSD is not set
-# CONFIG_ARCH_SPRD is not set
-# CONFIG_ARCH_THUNDER is not set
-# CONFIG_ARCH_THUNDER2 is not set
-# CONFIG_ARCH_UNIPHIER is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_VISCONTI is not set
-# CONFIG_ARCH_XGENE is not set
-# CONFIG_ARCH_ZYNQMP is not set
-# CONFIG_KEXEC is not set
-# CONFIG_KEXEC_FILE is not set
-# CONFIG_XEN is not set
-# CONFIG_ARM64_PTR_AUTH is not set
-# CONFIG_ARM64_TLB_RANGE is not set
-# CONFIG_ARM64_MTE is not set
-CONFIG_PM_DEBUG=y
-CONFIG_PM_TEST_SUSPEND=y
-# CONFIG_HIBERNATION is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM is not set
-# CONFIG_ARM_ARMADA_37XX_CPUFREQ is not set
-CONFIG_ARM_IMX_CPUFREQ_DT=y
-# CONFIG_ARM_QCOM_CPUFREQ_NVMEM is not set
-# CONFIG_ARM_QCOM_CPUFREQ_HW is not set
-# CONFIG_ARM_RASPBERRYPI_CPUFREQ is not set
-# CONFIG_ARM_SCMI_CPUFREQ is not set
-# CONFIG_ARM_TEGRA186_CPUFREQ is not set
-# CONFIG_ARM_MEDIATEK_CPUFREQ is not set
-# CONFIG_QORIQ_CPUFREQ is not set
-# CONFIG_ACPI_APEI_PCIEAER is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_KVM is not set
-# CONFIG_GCC_PLUGINS is not set
-CONFIG_IPV6=y
-CONFIG_MODVERSIONS=y
-CONFIG_IPV6_SIT=m
-CONFIG_NET_DSA_TAG_OCELOT=m
-CONFIG_VLAN_8021Q=y
-CONFIG_LLC2=y
-CONFIG_NET_SCH_MULTIQ=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_PKTGEN=m
-CONFIG_BT=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=y
-# CONFIG_CAN_RCAR is not set
-# CONFIG_CAN_RCAR_CANFD is not set
-# CONFIG_CAN_MCP251XFD is not set
-CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_ATH3K=y
-CONFIG_BT_HCIUART_3WIRE=y
-CONFIG_BT_HCIVHCI=y
-CONFIG_CFG80211=y
-CONFIG_NL80211_TESTMODE=y
-CONFIG_CFG80211_WEXT=y
-CONFIG_MAC80211=y
-# CONFIG_BT_HCIUART_MRVL is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_BT_MRVL_SDIO is not set
-# CONFIG_BT_QCOMSMD is not set
-# CONFIG_RFKILL is not set
-# CONFIG_PCI is not set
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_PCIEAER is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCI_PASID is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HOTPLUG_PCI_ACPI is not set
-# CONFIG_PCI_AARDVARK is not set
-# CONFIG_PCI_TEGRA is not set
-# CONFIG_PCIE_RCAR_HOST is not set
-# CONFIG_PCIE_RCAR_EP is not set
-# CONFIG_PCI_HOST_GENERIC is not set
-# CONFIG_PCI_XGENE is not set
-# CONFIG_PCIE_ALTERA is not set
-# CONFIG_PCIE_ALTERA_MSI is not set
-# CONFIG_PCI_HOST_THUNDER_PEM is not set
-# CONFIG_PCI_HOST_THUNDER_ECAM is not set
-# CONFIG_PCIE_ROCKCHIP_HOST is not set
-# CONFIG_PCIE_BRCMSTB is not set
-# CONFIG_PCI_IMX6 is not set
-# CONFIG_PCI_LAYERSCAPE is not set
-# CONFIG_PCI_HISI is not set
-# CONFIG_PCIE_QCOM is not set
-# CONFIG_PCIE_ARMADA_8K is not set
-# CONFIG_PCIE_KIRIN is not set
-# CONFIG_PCIE_HISI_STB is not set
-# CONFIG_PCIE_TEGRA194_HOST is not set
-# CONFIG_PCIE_VISCONTI_HOST is not set
-# CONFIG_PCIE_LAYERSCAPE_GEN4 is not set
-# CONFIG_PCI_ENDPOINT is not set
-# CONFIG_PCI_ENDPOINT_CONFIGFS is not set
-# CONFIG_PCI_EPF_TEST is not set
-CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
-CONFIG_BRCMSTB_GISB_ARB=y
-CONFIG_VEXPRESS_CONFIG=y
-# CONFIG_HISILICON_LPC is not set
-# CONFIG_TEGRA_ACONNECT is not set
-# CONFIG_RASPBERRYPI_FIRMWARE is not set
-# CONFIG_INTEL_STRATIX10_SERVICE is not set
-# CONFIG_INTEL_STRATIX10_RSU is not set
-CONFIG_IMX_DSP=y
-# CONFIG_GNSS is not set
-# CONFIG_GNSS_MTK_SERIAL is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_NAND_BRCMNAND is not set
-CONFIG_MTD_NAND_GPMI_NAND=y
-# CONFIG_MTD_NAND_MARVELL is not set
-# CONFIG_MTD_NAND_FSL_IFC is not set
-# CONFIG_MTD_NAND_QCOM is not set
-# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
-CONFIG_MTD_UBI=y
-# CONFIG_BLK_DEV_NVME is not set
-# CONFIG_PCI_ENDPOINT_TEST is not set
-CONFIG_RAID_ATTRS=m
-# CONFIG_SCSI_HISI_SAS_PCI is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT3SAS is not set
-# CONFIG_SCSI_UFS_QCOM is not set
-# CONFIG_SCSI_UFS_HISI is not set
-# CONFIG_SCSI_UFS_EXYNOS is not set
-# CONFIG_SATA_AHCI is not set
-CONFIG_AHCI_IMX=y
-# CONFIG_AHCI_BRCM is not set
-# CONFIG_AHCI_MVEBU is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_RCAR is not set
-CONFIG_DM_CRYPT=m
-# CONFIG_NET_DSA_BCM_SF2 is not set
-# CONFIG_NET_DSA_MSCC_FELIX is not set
-# CONFIG_NET_XGENE is not set
-# CONFIG_ATL1C is not set
-# CONFIG_SYSTEMPORT is not set
-# CONFIG_BNX2X is not set
-# CONFIG_THUNDER_NIC_PF is not set
-CONFIG_FSL_XGMAC_MDIO=y
-CONFIG_FSL_ENETC_IERB=y
-# CONFIG_FSL_FMAN is not set
-# CONFIG_FSL_DPAA_ETH is not set
-# CONFIG_FSL_DPAA2_ETH is not set
-# CONFIG_FSL_ENETC is not set
-# CONFIG_FSL_ENETC_VF is not set
-# CONFIG_FSL_ENETC_QOS is not set
-CONFIG_MVMDIO=y
-CONFIG_MSCC_OCELOT_SWITCH=m
-# CONFIG_HNS3 is not set
-# CONFIG_HNS3_HCLGE is not set
-# CONFIG_HNS3_ENET is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_MVNETA is not set
-# CONFIG_MVPP2 is not set
-# CONFIG_SKY2 is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX5_CORE is not set
-# CONFIG_MLX5_CORE_EN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SH_ETH is not set
-# CONFIG_RAVB is not set
-CONFIG_STMMAC_ETH=y
-CONFIG_DWMAC_GENERIC=m
-CONFIG_MICROCHIP_PHY=y
-CONFIG_NXP_TJA11XX_PHY=y
-CONFIG_MDIO_BITBANG=y
-# CONFIG_SNI_AVE is not set
-# CONFIG_SNI_NETSEC is not set
-# CONFIG_TI_K3_AM65_CPSW_NUSS is not set
-# CONFIG_QCOM_IPA is not set
-# CONFIG_MESON_GXL_PHY is not set
-# CONFIG_AQUANTIA_PHY is not set
-# CONFIG_BCM54140_PHY is not set
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_MARVELL_10G_PHY is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_MICROSEMI_PHY is not set
-# CONFIG_AT803X_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_ROCKCHIP_PHY is not set
-# CONFIG_DP83867_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_USB_BRCMSTB is not set
-CONFIG_USB_RTL8152=y
-CONFIG_USB_USBNET=y
-CONFIG_BRCMFMAC=y
-CONFIG_HOSTAP=y
-# CONFIG_ATH10K is not set
-# CONFIG_ATH10K_PCI is not set
-# CONFIG_ATH10K_SNOC is not set
-# CONFIG_WCN36XX is not set
-# CONFIG_MWIFIEX is not set
-# CONFIG_MWIFIEX_SDIO is not set
-# CONFIG_MWIFIEX_PCIE is not set
-CONFIG_KEYBOARD_SNVS_PWRKEY=y
-# CONFIG_KEYBOARD_IMX_SC_KEY is not set
-# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
-# CONFIG_INPUT_PM8941_PWRKEY is not set
-# CONFIG_INPUT_PM8XXX_VIBRATOR is not set
-# CONFIG_INPUT_PWM_BEEPER is not set
-# CONFIG_INPUT_PWM_VIBRA is not set
-# CONFIG_INPUT_HISI_POWERKEY is not set
-# CONFIG_SERIAL_8250_BCM2835AUX is not set
-# CONFIG_SERIAL_8250_OMAP is not set
-# CONFIG_SERIAL_8250_MT6577 is not set
-# CONFIG_SERIAL_8250_UNIPHIER is not set
-# CONFIG_SERIAL_MESON is not set
-# CONFIG_SERIAL_MESON_CONSOLE is not set
-# CONFIG_SERIAL_SAMSUNG is not set
-# CONFIG_SERIAL_SAMSUNG_CONSOLE is not set
-# CONFIG_SERIAL_TEGRA is not set
-# CONFIG_SERIAL_TEGRA_TCU is not set
-# CONFIG_SERIAL_SH_SCI is not set
-# CONFIG_SERIAL_MSM is not set
-# CONFIG_SERIAL_MSM_CONSOLE is not set
-# CONFIG_SERIAL_QCOM_GENI is not set
-# CONFIG_SERIAL_QCOM_GENI_CONSOLE is not set
-# CONFIG_SERIAL_MVEBU_UART is not set
-# CONFIG_SERIAL_OWL is not set
-# CONFIG_I2C_MUX is not set
-# CONFIG_I2C_BCM2835 is not set
-# CONFIG_I2C_MESON is not set
-# CONFIG_I2C_MT65XX is not set
-# CONFIG_I2C_MV64XXX is not set
-# CONFIG_I2C_OMAP is not set
-# CONFIG_I2C_OWL is not set
-# CONFIG_I2C_PXA is not set
-# CONFIG_I2C_QCOM_CCI is not set
-# CONFIG_I2C_QCOM_GENI is not set
-# CONFIG_I2C_QUP is not set
-# CONFIG_I2C_RIIC is not set
-# CONFIG_I2C_S3C2410 is not set
-# CONFIG_I2C_SH_MOBILE is not set
-# CONFIG_I2C_TEGRA is not set
-# CONFIG_I2C_UNIPHIER_F is not set
-# CONFIG_I2C_RCAR is not set
-# CONFIG_SPI_ARMADA_3700 is not set
-# CONFIG_SPI_BCM2835 is not set
-# CONFIG_SPI_BCM2835AUX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-# CONFIG_SPI_DW_DMA is not set
-# CONFIG_SPI_DW_MMIO is not set
-CONFIG_SPI_IMX=y
-# CONFIG_SPI_FSL_DSPI is not set
-# CONFIG_SPI_MESON_SPICC is not set
-# CONFIG_SPI_MESON_SPIFC is not set
-# CONFIG_SPI_ORION is not set
-CONFIG_SPI_SPIDEV=y
-CONFIG_SPI_SLAVE=y
-CONFIG_SPI_SLAVE_TIME=y
-CONFIG_SPI_SLAVE_SYSTEM_CONTROL=y
-CONFIG_PINCTRL=y
-# CONFIG_SPI_RPCIF is not set
-# CONFIG_SPI_RSPI is not set
-# CONFIG_SPI_QCOM_QSPI is not set
-# CONFIG_SPI_QUP is not set
-# CONFIG_SPI_QCOM_GENI is not set
-# CONFIG_SPI_S3C64XX is not set
-# CONFIG_SPI_SH_MSIOF is not set
-# CONFIG_SPI_SUN6I is not set
-# CONFIG_SPMI is not set
-# CONFIG_PINCTRL_OWL is not set
-# CONFIG_PINCTRL_S700 is not set
-# CONFIG_PINCTRL_S900 is not set
-CONFIG_GPIOLIB=y
-# CONFIG_PINCTRL_MSM is not set
-# CONFIG_PINCTRL_IPQ8074 is not set
-# CONFIG_PINCTRL_IPQ6018 is not set
-# CONFIG_PINCTRL_MSM8916 is not set
-# CONFIG_PINCTRL_MSM8994 is not set
-# CONFIG_PINCTRL_MSM8996 is not set
-# CONFIG_PINCTRL_MSM8998 is not set
-# CONFIG_PINCTRL_QCS404 is not set
-# CONFIG_PINCTRL_QDF2XXX is not set
-# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
-# CONFIG_PINCTRL_SC7180 is not set
-# CONFIG_PINCTRL_SC7280 is not set
-# CONFIG_PINCTRL_SDM845 is not set
-# CONFIG_PINCTRL_SM8150 is not set
-# CONFIG_PINCTRL_SM8250 is not set
-# CONFIG_PINCTRL_SM8350 is not set
-# CONFIG_PINCTRL_SM8450 is not set
-# CONFIG_PINCTRL_LPASS_LPI is not set
-# CONFIG_GPIO_DAVINCI is not set
-# CONFIG_GPIO_MPC8XXX is not set
-# CONFIG_GPIO_RCAR is not set
-# CONFIG_GPIO_UNIPHIER is not set
-# CONFIG_GPIO_VISCONTI is not set
-# CONFIG_GPIO_XGENE_SB is not set
-CONFIG_POWER_RESET_BRCMSTB=y
-# CONFIG_GPIO_MAX77620 is not set
-# CONFIG_GPIO_SL28CPLD is not set
-# CONFIG_POWER_RESET_MSM is not set
-# CONFIG_POWER_RESET_QCOM_PON is not set
-# CONFIG_BATTERY_MAX17042 is not set
-# CONFIG_CHARGER_BQ25890 is not set
-# CONFIG_CHARGER_BQ25980 is not set
-# CONFIG_SENSORS_JC42 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_RASPBERRYPI_HWMON is not set
-# CONFIG_SENSORS_SL28CPLD is not set
-CONFIG_THERMAL_WRITABLE_TRIPS=y
-CONFIG_IMX_SC_THERMAL=y
-CONFIG_IMX8MM_THERMAL=y
-CONFIG_QORIQ_THERMAL=y
-# CONFIG_SUN8I_THERMAL is not set
-# CONFIG_ROCKCHIP_THERMAL is not set
-# CONFIG_RCAR_THERMAL is not set
-# CONFIG_RCAR_GEN3_THERMAL is not set
-# CONFIG_RZG2L_THERMAL is not set
-# CONFIG_ARMADA_THERMAL is not set
-# CONFIG_BCM2711_THERMAL is not set
-# CONFIG_BCM2835_THERMAL is not set
-# CONFIG_BRCMSTB_THERMAL is not set
-# CONFIG_EXYNOS_THERMAL is not set
-# CONFIG_TEGRA_SOCTHERM is not set
-# CONFIG_TEGRA_BPMP_THERMAL is not set
-# CONFIG_QCOM_TSENS is not set
-# CONFIG_QCOM_SPMI_TEMP_ALARM is not set
-# CONFIG_QCOM_LMH is not set
-# CONFIG_UNIPHIER_THERMAL is not set
-# CONFIG_SL28CPLD_WATCHDOG is not set
-# CONFIG_S3C2410_WATCHDOG is not set
-# CONFIG_BCM7038_WDT is not set
-# CONFIG_SUNXI_WATCHDOG is not set
-CONFIG_IMX_SC_WDT=y
-CONFIG_IMX7ULP_WDT=y
-# CONFIG_QCOM_WDT is not set
-# CONFIG_MESON_GXBB_WATCHDOG is not set
-# CONFIG_MESON_WATCHDOG is not set
-# CONFIG_RENESAS_WDT is not set
-# CONFIG_RENESAS_RZG2LWDT is not set
-# CONFIG_UNIPHIER_WATCHDOG is not set
-# CONFIG_BCM2835_WDT is not set
-# CONFIG_MFD_ALTERA_SYSMGR is not set
-# CONFIG_MFD_AXP20X_RSB is not set
-# CONFIG_MFD_EXYNOS_LPASS is not set
-# CONFIG_MFD_HI655X_PMIC is not set
-# CONFIG_MFD_MT6397 is not set
-# CONFIG_MFD_SPMI_PMIC is not set
-# CONFIG_MFD_SL28CPLD is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_HI655X is not set
-# CONFIG_REGULATOR_MP8859 is not set
-# CONFIG_REGULATOR_MT6358 is not set
-# CONFIG_REGULATOR_MT6397 is not set
-# CONFIG_REGULATOR_PF8X00 is not set
-# CONFIG_REGULATOR_QCOM_RPMH is not set
-# CONFIG_REGULATOR_QCOM_SMD_RPM is not set
-# CONFIG_REGULATOR_QCOM_SPMI is not set
-# CONFIG_REGULATOR_TPS65132 is not set
-CONFIG_MEDIA_SUPPORT=y
-# CONFIG_RC_CORE is not set
-# CONFIG_RC_DECODERS is not set
-# CONFIG_RC_DEVICES is not set
-# CONFIG_IR_MESON is not set
-# CONFIG_IR_SUNXI is not set
-CONFIG_SDR_PLATFORM_DRIVERS=y
-# CONFIG_VIDEO_QCOM_CAMSS is not set
-# CONFIG_VIDEO_RCAR_CSI2 is not set
-# CONFIG_VIDEO_RCAR_VIN is not set
-# CONFIG_VIDEO_SUN6I_CSI is not set
-# CONFIG_VIDEO_RCAR_ISP is not set
-# CONFIG_VIDEO_SAMSUNG_S5P_JPEG is not set
-# CONFIG_VIDEO_SAMSUNG_S5P_MFC is not set
-# CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC is not set
-# CONFIG_VIDEO_RENESAS_FDP1 is not set
-# CONFIG_VIDEO_RENESAS_FCP is not set
-# CONFIG_VIDEO_RENESAS_VSP1 is not set
-# CONFIG_VIDEO_QCOM_VENUS is not set
-# CONFIG_VIDEO_RCAR_DRIF is not set
-CONFIG_VIDEO_OV5640=y
-CONFIG_DRM=y
-CONFIG_DRM_I2C_CH7006=m
-CONFIG_DRM_I2C_SIL164=m
-# CONFIG_DRM_NOUVEAU is not set
-# CONFIG_DRM_EXYNOS is not set
-# CONFIG_DRM_EXYNOS5433_DECON is not set
-# CONFIG_DRM_EXYNOS7_DECON is not set
-# CONFIG_DRM_EXYNOS_DSI is not set
-# CONFIG_DRM_EXYNOS_DP is not set
-# CONFIG_DRM_EXYNOS_HDMI is not set
-# CONFIG_DRM_EXYNOS_MIC is not set
-# CONFIG_DRM_ROCKCHIP is not set
-# CONFIG_ROCKCHIP_ANALOGIX_DP is not set
-# CONFIG_ROCKCHIP_CDN_DP is not set
-# CONFIG_ROCKCHIP_DW_HDMI is not set
-# CONFIG_ROCKCHIP_DW_MIPI_DSI is not set
-# CONFIG_ROCKCHIP_INNO_HDMI is not set
-# CONFIG_ROCKCHIP_LVDS is not set
-# CONFIG_DRM_RCAR_DU is not set
-# CONFIG_DRM_RCAR_MIPI_DSI is not set
-# CONFIG_DRM_SUN4I is not set
-# CONFIG_DRM_SUN6I_DSI is not set
-# CONFIG_DRM_SUN8I_DW_HDMI is not set
-# CONFIG_DRM_SUN8I_MIXER is not set
-# CONFIG_DRM_MSM is not set
-# CONFIG_DRM_TEGRA is not set
-# CONFIG_DRM_PANEL_BOE_TV101WUM_NL6 is not set
-# CONFIG_DRM_PANEL_LVDS is not set
-# CONFIG_DRM_PANEL_SIMPLE is not set
-# CONFIG_DRM_PANEL_EDP is not set
-# CONFIG_DRM_PANEL_MANTIX_MLAF057WE51 is not set
-# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set
-# CONFIG_DRM_PANEL_SITRONIX_ST7703 is not set
-CONFIG_DRM_DISPLAY_CONNECTOR=m
-# CONFIG_DRM_LONTIUM_LT8912B is not set
-CONFIG_DRM_NWL_MIPI_DSI=y
-# CONFIG_DRM_LONTIUM_LT9611UXC is not set
-# CONFIG_DRM_PARADE_PS8640 is not set
-CONFIG_DRM_I2C_ADV7511=y
-CONFIG_DRM_DW_HDMI_I2S_AUDIO=m
-CONFIG_DRM_IMX_DCSS=y
-# CONFIG_DRM_VC4 is not set
-# CONFIG_DRM_HISI_HIBMC is not set
-CONFIG_DRM_MXSFB=y
-# CONFIG_DRM_MEDIATEK is not set
-# CONFIG_DRM_MEDIATEK_HDMI is not set
-# CONFIG_DRM_MESON is not set
-CONFIG_DRM_LEGACY=y
-# CONFIG_FB is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_EFI is not set
-# CONFIG_BACKLIGHT_PWM is not set
-# CONFIG_BACKLIGHT_LP855X is not set
-# CONFIG_LOGO is not set
-CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_ALOOP=m
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-# CONFIG_SND_HDA_TEGRA is not set
-# CONFIG_SND_HDA_CODEC_HDMI is not set
-CONFIG_SND_SOC_FSL_ASRC=y
-CONFIG_SND_SOC_FSL_EASRC=y
-CONFIG_SND_IMX_SOC=y
-CONFIG_SND_SOC_FSL_ASOC_CARD=y
-CONFIG_SND_SOC_SOF_TOPLEVEL=y
-CONFIG_SND_SOC_SOF_OF=m
-CONFIG_SND_SOC_SOF_IMX_TOPLEVEL=y
-CONFIG_SND_SOC_AK4458=y
-CONFIG_SND_SOC_AK5558=y
-CONFIG_SND_SOC_PCM512x_I2C=y
-CONFIG_SND_SIMPLE_CARD=y
-CONFIG_SND_AUDIO_GRAPH_CARD=y
-CONFIG_USB_CONN_GPIO=y
-# CONFIG_SND_BCM2835_SOC_I2S is not set
-# CONFIG_SND_SOC_FSL_MICFIL is not set
-# CONFIG_SND_SOC_IMX_SGTL5000 is not set
-# CONFIG_SND_SOC_IMX_SPDIF is not set
-# CONFIG_SND_SOC_IMX_AUDMIX is not set
-# CONFIG_SND_MESON_AXG_SOUND_CARD is not set
-# CONFIG_SND_MESON_GX_SOUND_CARD is not set
-# CONFIG_SND_SOC_QCOM is not set
-# CONFIG_SND_SOC_APQ8016_SBC is not set
-# CONFIG_SND_SOC_MSM8996 is not set
-# CONFIG_SND_SOC_SDM845 is not set
-# CONFIG_SND_SOC_SM8250 is not set
-# CONFIG_SND_SOC_ROCKCHIP is not set
-# CONFIG_SND_SOC_ROCKCHIP_SPDIF is not set
-# CONFIG_SND_SOC_ROCKCHIP_RT5645 is not set
-# CONFIG_SND_SOC_RK3399_GRU_SOUND is not set
-# CONFIG_SND_SOC_SAMSUNG is not set
-# CONFIG_SND_SOC_RCAR is not set
-# CONFIG_SND_SOC_RZ is not set
-# CONFIG_SND_SUN4I_I2S is not set
-# CONFIG_SND_SUN4I_SPDIF is not set
-# CONFIG_SND_SOC_TEGRA is not set
-# CONFIG_SND_SOC_TEGRA210_AHUB is not set
-# CONFIG_SND_SOC_TEGRA210_DMIC is not set
-# CONFIG_SND_SOC_TEGRA210_I2S is not set
-# CONFIG_SND_SOC_TEGRA186_DSPK is not set
-# CONFIG_SND_SOC_TEGRA210_ADMAIF is not set
-# CONFIG_SND_SOC_TEGRA210_MVC is not set
-# CONFIG_SND_SOC_TEGRA210_SFC is not set
-# CONFIG_SND_SOC_TEGRA210_AMX is not set
-# CONFIG_SND_SOC_TEGRA210_ADX is not set
-# CONFIG_SND_SOC_TEGRA210_MIXER is not set
-# CONFIG_SND_SOC_TEGRA_AUDIO_GRAPH_CARD is not set
-# CONFIG_SND_SOC_AK4613 is not set
-# CONFIG_SND_SOC_ES7134 is not set
-# CONFIG_SND_SOC_ES7241 is not set
-# CONFIG_SND_SOC_GTM601 is not set
-# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set
-# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
-# CONFIG_SND_SOC_PCM3168A_I2C is not set
-# CONFIG_SND_SOC_RT5659 is not set
-# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set
-# CONFIG_SND_SOC_SIMPLE_MUX is not set
-# CONFIG_SND_SOC_TAS571X is not set
-# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set
-# CONFIG_SND_SOC_WCD934X is not set
-# CONFIG_SND_SOC_WM8904 is not set
-# CONFIG_SND_SOC_WM8960 is not set
-# CONFIG_SND_SOC_WM8962 is not set
-# CONFIG_SND_SOC_WM8978 is not set
-# CONFIG_SND_SOC_WSA881X is not set
-# CONFIG_SND_SOC_NAU8822 is not set
-# CONFIG_SND_SOC_LPASS_WSA_MACRO is not set
-# CONFIG_SND_SOC_LPASS_VA_MACRO is not set
-# CONFIG_SND_AUDIO_GRAPH_CARD2 is not set
-# CONFIG_HID_MULTITOUCH is not set
-# CONFIG_I2C_HID_ACPI is not set
-# CONFIG_I2C_HID_OF is not set
-# CONFIG_USB_XHCI_PCI_RENESAS is not set
-# CONFIG_USB_XHCI_TEGRA is not set
-# CONFIG_USB_EHCI_EXYNOS is not set
-# CONFIG_USB_OHCI_EXYNOS is not set
-CONFIG_USB_HCD_TEST_MODE=y
-# CONFIG_USB_RENESAS_USBHS_HCD is not set
-# CONFIG_USB_RENESAS_USBHS is not set
-CONFIG_USB_UAS=y
-# CONFIG_USB_CDNS_SUPPORT is not set
-# CONFIG_USB_CDNS3 is not set
-# CONFIG_USB_CDNS3_GADGET is not set
-# CONFIG_USB_CDNS3_HOST is not set
-# CONFIG_USB_MTU3 is not set
-# CONFIG_USB_MUSB_SUNXI is not set
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_SIMPLE=y
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_TEST=m
-CONFIG_USB_EHSET_TEST_FIXTURE=y
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-CONFIG_USB_MXS_PHY=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_SNP_UDC_PLAT=y
-CONFIG_USB_BDC_UDC=y
-CONFIG_USB_CONFIGFS=y
-# CONFIG_USB_RENESAS_USBHS_UDC is not set
-# CONFIG_USB_RENESAS_USB3 is not set
-# CONFIG_USB_TEGRA_XUDC is not set
-CONFIG_USB_CONFIGFS_F_LB_SS=y
-CONFIG_USB_CONFIGFS_F_UAC1=y
-CONFIG_USB_CONFIGFS_F_UAC1_LEGACY=y
-CONFIG_USB_CONFIGFS_F_UAC2=y
-CONFIG_USB_CONFIGFS_F_MIDI=y
-CONFIG_USB_CONFIGFS_F_HID=y
-CONFIG_USB_CONFIGFS_F_UVC=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_AUDIO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_TYPEC=y
-CONFIG_TYPEC_TCPM=y
-CONFIG_TYPEC_TCPCI=y
-# CONFIG_TYPEC_TPS6598X is not set
-# CONFIG_MMC_SDHCI_ACPI is not set
-# CONFIG_MMC_SDHCI_TEGRA is not set
-# CONFIG_MMC_MESON_GX is not set
-# CONFIG_MMC_SDHCI_MSM is not set
-# CONFIG_MMC_SDHI is not set
-# CONFIG_MMC_UNIPHIER is not set
-# CONFIG_MMC_DW_ROCKCHIP is not set
-# CONFIG_MMC_SUNXI is not set
-# CONFIG_MMC_BCM2835 is not set
-# CONFIG_MMC_MTK is not set
-# CONFIG_MMC_OWL is not set
-# CONFIG_LEDS_LM3692X is not set
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_EDAC_LAYERSCAPE is not set
-# CONFIG_RTC_DRV_HYM8563 is not set
-# CONFIG_RTC_DRV_PCF85063 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_RV3028 is not set
-# CONFIG_RTC_DRV_FSL_FTM_ALARM is not set
-# CONFIG_RTC_DRV_S3C is not set
-CONFIG_RTC_DRV_SNVS=y
-CONFIG_RTC_DRV_IMX_SC=y
-# CONFIG_RTC_DRV_SUN6I is not set
-# CONFIG_RTC_DRV_ARMADA38X is not set
-# CONFIG_RTC_DRV_PM8XXX is not set
-# CONFIG_RTC_DRV_TEGRA is not set
-# CONFIG_RTC_DRV_XGENE is not set
-# CONFIG_RTC_DRV_MT6397 is not set
-CONFIG_BCM_SBA_RAID=m
-# CONFIG_DMA_BCM2835 is not set
-# CONFIG_DMA_SUN6I is not set
-CONFIG_FSL_QDMA=m
-CONFIG_IMX_SDMA=y
-# CONFIG_K3_DMA is not set
-# CONFIG_MV_XOR is not set
-CONFIG_MXS_DMA=y
-# CONFIG_OWL_DMA is not set
-# CONFIG_TEGRA186_GPC_DMA is not set
-# CONFIG_TEGRA20_APB_DMA is not set
-# CONFIG_TEGRA210_ADMA is not set
-# CONFIG_QCOM_BAM_DMA is not set
-CONFIG_DMATEST=y
-CONFIG_DMABUF_HEAPS=y
-CONFIG_DMABUF_HEAPS_SYSTEM=y
-CONFIG_DMABUF_HEAPS_CMA=y
-# CONFIG_RCAR_DMAC is not set
-# CONFIG_RENESAS_USB_DMAC is not set
-# CONFIG_RZ_DMAC is not set
-# CONFIG_TI_K3_UDMA is not set
-# CONFIG_TI_K3_UDMA_GLUE_LAYER is not set
-# CONFIG_VFIO_PCI is not set
-# CONFIG_VIRTIO_PCI is not set
-# CONFIG_XEN_GNTDEV is not set
-# CONFIG_XEN_GRANT_DEV_ALLOC is not set
-# CONFIG_VIDEO_HANTRO is not set
-# CONFIG_VIDEO_IMX_MEDIA is not set
-# CONFIG_COMMON_CLK_SCMI is not set
-# CONFIG_COMMON_CLK_FSL_SAI is not set
-CONFIG_COMMON_CLK_XGENE=y
-# CONFIG_COMMON_CLK_BD718XX is not set
-# CONFIG_CLK_RASPBERRYPI is not set
-# CONFIG_CLK_IMX8MM is not set
-# CONFIG_CLK_IMX8MP is not set
-# CONFIG_CLK_IMX8MQ is not set
-# CONFIG_CLK_IMX8QXP is not set
-# CONFIG_CLK_IMX8ULP is not set
-# CONFIG_TI_SCI_CLK is not set
-# CONFIG_COMMON_CLK_QCOM is not set
-# CONFIG_QCOM_A53PLL is not set
-# CONFIG_QCOM_CLK_APCS_MSM8916 is not set
-# CONFIG_QCOM_CLK_APCC_MSM8996 is not set
-# CONFIG_QCOM_CLK_SMD_RPM is not set
-# CONFIG_QCOM_CLK_RPMH is not set
-# CONFIG_IPQ_GCC_6018 is not set
-# CONFIG_IPQ_GCC_8074 is not set
-# CONFIG_MSM_GCC_8916 is not set
-# CONFIG_MSM_GCC_8994 is not set
-# CONFIG_MSM_MMCC_8996 is not set
-# CONFIG_MSM_GCC_8998 is not set
-# CONFIG_QCS_GCC_404 is not set
-# CONFIG_SC_GCC_7180 is not set
-# CONFIG_SC_GCC_7280 is not set
-# CONFIG_SDM_CAMCC_845 is not set
-# CONFIG_SDM_GPUCC_845 is not set
-# CONFIG_SDM_VIDEOCC_845 is not set
-# CONFIG_SDM_DISPCC_845 is not set
-# CONFIG_SM_GCC_8350 is not set
-# CONFIG_SM_GCC_8450 is not set
-# CONFIG_SM_GPUCC_8150 is not set
-# CONFIG_SM_GPUCC_8250 is not set
-# CONFIG_QCOM_HFPLL is not set
-# CONFIG_CLK_GFM_LPASS_SM8250 is not set
-# CONFIG_CLK_RCAR_USB2_CLOCK_SEL is not set
-# CONFIG_HWSPINLOCK_QCOM is not set
-# CONFIG_RENESAS_OSTM is not set
-# CONFIG_BCM2835_MBOX is not set
-# CONFIG_QCOM_APCS_IPC is not set
-# CONFIG_QCOM_IPCC is not set
-# CONFIG_ROCKCHIP_IOMMU is not set
-# CONFIG_TEGRA_IOMMU_SMMU is not set
-# CONFIG_MTK_IOMMU is not set
-# CONFIG_QCOM_IOMMU is not set
-CONFIG_IMX_REMOTEPROC=y
-CONFIG_IMX_DSP_REMOTEPROC=y
-CONFIG_RPMSG_CHAR=y
-# CONFIG_QCOM_Q6V5_MSS is not set
-# CONFIG_QCOM_Q6V5_PAS is not set
-# CONFIG_QCOM_SYSMON is not set
-# CONFIG_QCOM_WCNSS_PIL is not set
-# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set
-# CONFIG_RPMSG_QCOM_SMD is not set
-CONFIG_SOC_BRCMSTB=y
-# CONFIG_OWL_PM_DOMAINS is not set
-# CONFIG_RASPBERRYPI_POWER is not set
-# CONFIG_FSL_DPAA is not set
-# CONFIG_FSL_MC_DPIO is not set
-CONFIG_SOC_TI=y
-# CONFIG_MTK_DEVAPC is not set
-# CONFIG_MTK_PMIC_WRAP is not set
-# CONFIG_QCOM_AOSS_QMP is not set
-# CONFIG_QCOM_COMMAND_DB is not set
-# CONFIG_QCOM_CPR is not set
-# CONFIG_QCOM_GENI_SE is not set
-# CONFIG_QCOM_RMTFS_MEM is not set
-# CONFIG_QCOM_RPMH is not set
-# CONFIG_QCOM_RPMHPD is not set
-# CONFIG_QCOM_RPMPD is not set
-# CONFIG_QCOM_SMEM is not set
-# CONFIG_QCOM_SMD_RPM is not set
-# CONFIG_QCOM_SMP2P is not set
-# CONFIG_QCOM_SMSM is not set
-# CONFIG_QCOM_SOCINFO is not set
-# CONFIG_QCOM_STATS is not set
-# CONFIG_QCOM_WCNSS_CTRL is not set
-# CONFIG_QCOM_APR is not set
-# CONFIG_ARCH_R8A77995 is not set
-# CONFIG_ARCH_R8A77990 is not set
-# CONFIG_ARCH_R8A77950 is not set
-# CONFIG_ARCH_R8A77951 is not set
-# CONFIG_ARCH_R8A77965 is not set
-# CONFIG_ARCH_R8A77960 is not set
-# CONFIG_ARCH_R8A77961 is not set
-# CONFIG_ARCH_R8A779F0 is not set
-# CONFIG_ARCH_R8A77980 is not set
-# CONFIG_ARCH_R8A77970 is not set
-# CONFIG_ARCH_R8A779A0 is not set
-# CONFIG_ARCH_R8A774C0 is not set
-# CONFIG_ARCH_R8A774E1 is not set
-# CONFIG_ARCH_R8A774A1 is not set
-# CONFIG_ARCH_R8A774B1 is not set
-# CONFIG_ARCH_R9A07G044 is not set
-# CONFIG_ROCKCHIP_IODOMAIN is not set
-# CONFIG_ROCKCHIP_PM_DOMAINS is not set
-# CONFIG_ARCH_TEGRA_132_SOC is not set
-# CONFIG_ARCH_TEGRA_210_SOC is not set
-# CONFIG_ARCH_TEGRA_186_SOC is not set
-# CONFIG_ARCH_TEGRA_194_SOC is not set
-# CONFIG_ARCH_TEGRA_234_SOC is not set
-# CONFIG_TI_SCI_PM_DOMAINS is not set
-# CONFIG_ARM_IMX_BUS_DEVFREQ is not set
-# CONFIG_ARM_IMX8M_DDRC_DEVFREQ is not set
-CONFIG_MEMORY=y
-# CONFIG_RENESAS_RPCIF is not set
-CONFIG_IMX8QXP_ADC=y
-# CONFIG_EXYNOS_ADC is not set
-# CONFIG_QCOM_SPMI_VADC is not set
-# CONFIG_QCOM_SPMI_ADC5 is not set
-# CONFIG_ROCKCHIP_SARADC is not set
-# CONFIG_RZG2L_ADC is not set
-# CONFIG_TI_ADS1015 is not set
-CONFIG_IIO_ST_LSM6DSX=y
-# CONFIG_SENSORS_ISL29018 is not set
-# CONFIG_VCNL4000 is not set
-# CONFIG_IIO_ST_MAGN_3AXIS is not set
-# CONFIG_MPL3115 is not set
-# CONFIG_PWM_BCM2835 is not set
-# CONFIG_PWM_BRCMSTB is not set
-CONFIG_PWM_FSL_FTM=m
-CONFIG_PWM_IMX27=y
-# CONFIG_PWM_MESON is not set
-# CONFIG_PWM_MTK_DISP is not set
-# CONFIG_PWM_MEDIATEK is not set
-# CONFIG_PWM_RCAR is not set
-# CONFIG_PWM_RENESAS_TPU is not set
-# CONFIG_PWM_ROCKCHIP is not set
-# CONFIG_PWM_SAMSUNG is not set
-# CONFIG_PWM_SL28CPLD is not set
-# CONFIG_PWM_SUN4I is not set
-# CONFIG_PWM_TEGRA is not set
-# CONFIG_PWM_VISCONTI is not set
-# CONFIG_SL28CPLD_INTC is not set
-# CONFIG_QCOM_PDC is not set
-# CONFIG_RESET_QCOM_AOSS is not set
-# CONFIG_RESET_QCOM_PDC is not set
-# CONFIG_RESET_RZG2L_USBPHY_CTRL is not set
-# CONFIG_RESET_TI_SCI is not set
-CONFIG_PHY_CADENCE_SALVO=y
-CONFIG_PHY_MIXEL_MIPI_DPHY=y
-# CONFIG_PHY_SUN4I_USB is not set
-# CONFIG_PHY_CADENCE_SIERRA is not set
-# CONFIG_PHY_FSL_IMX8M_PCIE is not set
-# CONFIG_PHY_HI6220_USB is not set
-# CONFIG_PHY_HISTB_COMBPHY is not set
-# CONFIG_PHY_HISI_INNO_USB2 is not set
-# CONFIG_PHY_MVEBU_CP110_COMPHY is not set
-# CONFIG_PHY_MTK_TPHY is not set
-# CONFIG_PHY_QCOM_QMP is not set
-# CONFIG_PHY_QCOM_QUSB2 is not set
-CONFIG_PHY_SAMSUNG_USB2=y
-# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
-# CONFIG_PHY_RCAR_GEN3_PCIE is not set
-# CONFIG_PHY_RCAR_GEN3_USB2 is not set
-# CONFIG_PHY_RCAR_GEN3_USB3 is not set
-# CONFIG_PHY_ROCKCHIP_EMMC is not set
-# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
-# CONFIG_PHY_ROCKCHIP_INNO_USB2 is not set
-# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
-# CONFIG_PHY_ROCKCHIP_PCIE is not set
-# CONFIG_PHY_ROCKCHIP_TYPEC is not set
-# CONFIG_PHY_SAMSUNG_UFS is not set
-# CONFIG_PHY_UNIPHIER_USB2 is not set
-# CONFIG_PHY_UNIPHIER_USB3 is not set
-# CONFIG_PHY_TEGRA_XUSB is not set
-# CONFIG_PHY_AM654_SERDES is not set
-# CONFIG_PHY_J721E_WIZ is not set
-CONFIG_FSL_IMX8_DDR_PMU=y
-# CONFIG_QCOM_L2_PMU is not set
-# CONFIG_QCOM_L3_PMU is not set
-# CONFIG_MTK_EFUSE is not set
-# CONFIG_QCOM_QFPROM is not set
-# CONFIG_ROCKCHIP_EFUSE is not set
-# CONFIG_NVMEM_SUNXI_SID is not set
-# CONFIG_UNIPHIER_EFUSE is not set
-# CONFIG_MESON_EFUSE is not set
-# CONFIG_NVMEM_RMEM is not set
-# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
-# CONFIG_FPGA_MGR_ALTERA_CVP is not set
-# CONFIG_FPGA_MGR_STRATIX10_SOC is not set
-# CONFIG_SLIMBUS is not set
-# CONFIG_SLIM_QCOM_NGD_CTRL is not set
-# CONFIG_INTERCONNECT_IMX is not set
-# CONFIG_INTERCONNECT_IMX8MM is not set
-# CONFIG_INTERCONNECT_IMX8MN is not set
-# CONFIG_INTERCONNECT_IMX8MQ is not set
-# CONFIG_INTERCONNECT_QCOM is not set
-# CONFIG_INTERCONNECT_QCOM_MSM8916 is not set
-# CONFIG_INTERCONNECT_QCOM_OSM_L3 is not set
-# CONFIG_INTERCONNECT_QCOM_SC7280 is not set
-# CONFIG_INTERCONNECT_QCOM_SDM845 is not set
-# CONFIG_INTERCONNECT_QCOM_SM8150 is not set
-# CONFIG_INTERCONNECT_QCOM_SM8250 is not set
-# CONFIG_INTERCONNECT_QCOM_SM8350 is not set
-# CONFIG_INTERCONNECT_QCOM_SM8450 is not set
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_UBIFS_FS=y
-CONFIG_SQUASHFS_XZ=y
-CONFIG_CRYPTO_USER=y
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_DH=m
-CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_CFB=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_OFB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_STREEBOG=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_USER_API_HASH=m
-CONFIG_CRYPTO_USER_API_SKCIPHER=m
-CONFIG_CRYPTO_USER_API_AEAD=m
-# CONFIG_CRYPTO_DEV_SUN8I_CE is not set
-# CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM is not set
-# CONFIG_CRYPTO_DEV_QCOM_RNG is not set
-CONFIG_CRYPTO_DEV_AMLOGIC_GXL=m
-CONFIG_INDIRECT_PIO=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRYPTO_DEV_HISI_SEC2 is not set
-# CONFIG_CRYPTO_DEV_HISI_ZIP is not set
-# CONFIG_CRYPTO_DEV_HISI_HPRE is not set
-# CONFIG_CRYPTO_DEV_HISI_TRNG is not set
-CONFIG_IRQ_POLL=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_INFO_REDUCED is not set
-CONFIG_CORESIGHT=y
-CONFIG_CORESIGHT_LINK_AND_SINK_TMC=y
-CONFIG_CORESIGHT_SOURCE_ETM4X=y
@@ -1,4 +0,0 @@
-label buildroot
-  kernel /boot/Image
-  devicetree /boot/freescale/imx8mn-bsh-smm-s2pro.dtb
-  append root=PARTUUID=%PARTUUID% rootwait rw
@@ -1,23 +0,0 @@
-#!/bin/bash
-
-if [ $# -eq 0 ]; then
-    OUTPUT_DIR=output
-else
-    OUTPUT_DIR=$1
-fi
-
-if ! test -d "${OUTPUT_DIR}" ; then
-    echo "ERROR: no output directory specified."
-    echo "Usage: $0 OUTPUT_DIR"
-    echo ""
-    echo "Arguments:"
-    echo "    OUTPUT_DIR    The Buildroot output directory."
-    exit 1
-fi
-
-IMAGES_DIR=${OUTPUT_DIR}/images
-
-${OUTPUT_DIR}/host/bin/uuu -v -b emmc_all \
-  ${IMAGES_DIR}/flash.bin \
-  ${IMAGES_DIR}/sdcard.img
-
@@ -1,17 +0,0 @@
-image sdcard.img {
-	hdimage {
-		partition-table-type = "gpt"
-	}
-
-	partition imx-boot {
-		in-partition-table = "no"
-		image = "flash.bin"
-		offset = 32K
-	}
-
-	partition rootfs {
-		offset = 8M
-		image = "rootfs.ext4"
-		partition-uuid = %PARTUUID%
-	}
-}
@@ -1,7 +0,0 @@
-#!/bin/sh
-BOARD_DIR="$(dirname $0)"
-PARTUUID="$($HOST_DIR/bin/uuidgen)"
-
-install -d "$TARGET_DIR/boot/extlinux/"
-sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/extlinux.conf" > "$TARGET_DIR/boot/extlinux/extlinux.conf"
-sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/genimage.cfg" > "$BINARIES_DIR/genimage.cfg"
@@ -1,3 +0,0 @@
-#!/bin/sh
-
-support/scripts/genimage.sh -c ${BINARIES_DIR}/genimage.cfg
@@ -1,73 +0,0 @@
-i.MX8MN BSH SMM S2 PRO
-======================
-
-How to build it
---------------
-
-Configure buildroot:
-
-  $ make imx8mn_bsh_smm_s2_pro_defconfig
-
-Change settings to fit your needs (optional):
-
-  $ make menuconfig
-
-Compile everything and build the rootfs image:
-
-  $ make
-
-
-Result of the build
-------------------
-
-After building, the output/images directory contains:
-
-  output/images/
-    ├── bl31.bin
-    ├── Image
-    ├── flash.bin
-    ├── ddr3*
-    ├── rootfs.ext2
-    ├── rootfs.ext4 -> rootfs.ext2
-    ├── rootfs.tar
-    ├── sdcard.img
-    ├── u-boot.bin
-    ├── u-boot-nodtb.bin
-    └── u-boot-spl.bin
-
-
-Preparing the board
-------------------
-
-Plug the USB type A to micro B cable into the USB Debug
-Connector (DBG UART). Use serial port settings 115200 8N1
-to access the debug console.
-
-Plug another USB type A to micro B cable into the USB-OTG
-Connector (USB1). This connection is used to flash the board
-firmware using the Freescale/NXP UUU tool.
-
-Connect the power supply/adaptor to the DC Power Jack (labelled
-+5V).
-
-
-Flashing the emmc card image
----------------------------
-
-Power up the board by switching on the Power ON Switch, which is
-placed right next to the DC Jack.
-
-Enter the following U-Boot commands on the debug serial console:
-
-  $ fastboot usb 0
-
-Flash the images on eMMC. On your computer, run:
-
-  $ board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh output/
-
-
-Booting the board
-----------------
-
-By default the bootloader will search for the first valid image,
-starting with the internal eMMC.
@@ -1,26 +0,0 @@
-#!/bin/bash
-
-if [ $# -eq 0 ]; then
-    OUTPUT_DIR=output
-else
-    OUTPUT_DIR=$1
-fi
-
-if ! test -d "${OUTPUT_DIR}" ; then
-    echo "ERROR: no output directory specified."
-    echo "Usage: $0 OUTPUT_DIR"
-    echo ""
-    echo "Arguments:"
-    echo "    OUTPUT_DIR    The Buildroot output directory."
-    exit 1
-fi
-
-IMAGES_DIR=${OUTPUT_DIR}/images
-
-${OUTPUT_DIR}/host/bin/uuu -v -b ${IMAGES_DIR}/nand-full.lst \
-  ${IMAGES_DIR}/flash.bin \
-  ${IMAGES_DIR}/flash.bin \
-  ${IMAGES_DIR}/rootfs.ubifs \
-  ${IMAGES_DIR}/Image \
-  ${IMAGES_DIR}/freescale/imx8mn-bsh-smm-s2.dtb
-
@@ -1,29 +0,0 @@
-# @_flash.bin            | bootloader
-# @_image   [_flash.bin] | image burn to nand, default is the same as bootloader
-# @_filesystem           | filesystem to burn
-# @_kernel               | kernel image
-# @_dtb                  | dtb image
-
-# This command will be run when ROM support stream mode
-# i.MX8QXP, i.MX8QM
-SDPS: boot -f _flash.bin
-
-FB: ucmd setenv fastboot_buffer ${loadaddr}
-FB: download -f _image
-# Burn image to nandfit partition if needed
-FB: ucmd if env exists nandfit_part; then nand erase.part nandfit; nand write ${fastboot_buffer} nandfit ${filesize}; else true; fi;
-FB: ucmd nandbcb init ${fastboot_buffer} nandboot ${filesize}
-
-FB[-t 10000]: ucmd ubi part nandrootfs
-FB[-t 10000]: ucmd ubi create root -
-FB: download -f _filesystem
-FB[-t 60000]: ucmd ubi write ${loadaddr} root ${filesize}
-
-FB: download -f _kernel
-FB[-t 10000]: ucmd nand write ${loadaddr} nandkernel ${filesize}
-
-FB: download -f _dtb
-FB[-t 8000]: ucmd nand write ${loadaddr} nanddtb ${filesize}
-
-FB: reboot
-FB: done
@@ -1,4 +0,0 @@
-#!/bin/sh
-BOARD_DIR="$(dirname $0)"
-
-cp ${BOARD_DIR}/nand-full.lst ${BINARIES_DIR}
@@ -1,75 +0,0 @@
-i.MX8MN BSH SMM S2
-==================
-
-This tutorial describes how to use the predefined Buildroot
-configuration for the i.MX8MN BSH SMM S2 board.
-
-Building
--------
-
-Configure buildroot:
-
-  $ make imx8mn_bsh_smm_s2_defconfig
-
-Change settings to fit your needs (optional):
-
-  $ make menuconfig
-
-Compile everything and build the rootfs image:
-
-  $ make
-
-
-Result of the build
-------------------
-
-After building, the output/images directory contains:
-
-  output/images/
-    ├── bl31.bin
-    ├── ddr3*
-    ├── flash.bin
-    ├── freescale/imx8mn-bsh-smm-s2.dtb
-    ├── Image
-    ├── nand-full.lst
-    ├── rootfs.ext2
-    ├── rootfs.ext4 -> rootfs.ext2
-    ├── rootfs.tar
-    ├── rootfs.ubifs
-    ├── u-boot.bin
-    └── u-boot-spl.bin
-
-
-Preparing the board
-------------------
-
-Plug the USB type A to micro B cable into the USB Debug
-Connector (DBG UART). Use serial port settings 115200 8N1
-to access the debug console.
-
-Plug another USB type A to micro B cable into the USB-OTG
-Connector (USB1). This connection is used to flash the board
-firmware using the Freescale/NXP UUU tool.
-
-Connect the power supply/adaptor to the DC Power Jack (labelled
-+5V).
-
-
-Flashing
--------
-
-Power up the board by switching on the Power ON Switch, which is
-placed right next to the DC Jack.
-
-Enter the following U-Boot commands on the debug serial console:
-
-  $ nand erase.chip
-  $ reset
-
-Flash the built images directly to board’s memory. On your computer,
-run:
-
-  $ board/bsh/imx8mn-bsh-smm-s2/flash.sh output/
-
-It will flash the bootloader, the Device Tree Blob, the kernel image
-and the UBI root file system.
@@ -1,58 +0,0 @@
-From 0cf11f3c0478f4286adcfb09bf9137f8b00212e3 Mon Sep 17 00:00:00 2001
-From: Alexandre Ghiti <alexandre.ghiti@canonical.com>
-Date: Mon, 3 Oct 2022 18:07:54 +0200
-Subject: [PATCH] riscv: Fix build against binutils 2.38
-
-The following description is copied from the equivalent patch for the
-Linux Kernel proposed by Aurelien Jarno:
-
->From version 2.38, binutils default to ISA spec version 20191213. This
-means that the csr read/write (csrr*/csrw*) instructions and fence.i
-instruction has separated from the `I` extension, become two standalone
-extensions: Zicsr and Zifencei. As the kernel uses those instruction,
-this causes the following build failure:
-
-arch/riscv/cpu/mtrap.S: Assembler messages:
-arch/riscv/cpu/mtrap.S:65: Error: unrecognized opcode `csrr a0,scause'
-arch/riscv/cpu/mtrap.S:66: Error: unrecognized opcode `csrr a1,sepc'
-arch/riscv/cpu/mtrap.S:67: Error: unrecognized opcode `csrr a2,stval'
-arch/riscv/cpu/mtrap.S:70: Error: unrecognized opcode `csrw sepc,a0'
-
-Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
-Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
-Tested-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
-Tested-by: Heiko Stuebner <heiko@sntech.de>
-Tested-by: Christian Stewart <christian@paral.in>
-Reviewed-by: Rick Chen <rick@andestech.com>
-(cherry picked from commit 1dde977518f13824b847e23275001191139bc384)
-Upstream: https://gitlab.com/u-boot/u-boot/-/commit/1dde977518f13824b847e23275001191139bc384
-Signed-off-by: Romain Naour <romain.naour@gmail.com>
---
- arch/riscv/Makefile | 11 ++++++++++-
- 1 file changed, 10 insertions(+), 1 deletion(-)
-
-diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
-index 0b80eb8d864..53d1194ffb6 100644
--- a/arch/riscv/Makefile
-+++ b/arch/riscv/Makefile
-@@ -24,7 +24,16 @@ ifeq ($(CONFIG_CMODEL_MEDANY),y)
- 	CMODEL = medany
- endif
- 
-ARCH_FLAGS = -march=$(ARCH_BASE)$(ARCH_A)$(ARCH_C) -mabi=$(ABI) \
-+RISCV_MARCH = $(ARCH_BASE)$(ARCH_A)$(ARCH_C)
-+
-+# Newer binutils versions default to ISA spec version 20191213 which moves some
-+# instructions from the I extension to the Zicsr and Zifencei extensions.
-+toolchain-need-zicsr-zifencei := $(call cc-option-yn, -mabi=$(ABI) -march=$(RISCV_MARCH)_zicsr_zifencei)
-+ifeq ($(toolchain-need-zicsr-zifencei),y)
-+	RISCV_MARCH := $(RISCV_MARCH)_zicsr_zifencei
-+endif
-+
-+ARCH_FLAGS = -march=$(RISCV_MARCH) -mabi=$(ABI) \
- 	     -mcmodel=$(CMODEL)
- 
- PLATFORM_CPPFLAGS	+= $(ARCH_FLAGS)
-- 
-2.41.0
-
@@ -1,4 +0,0 @@
-label RK3399RocPC linux
-  kernel /boot/Image
-  devicetree /boot/rk3399-roc-pc.dtb
-  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk0p1 rootwait
@@ -1,22 +0,0 @@
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot-tpl-spl-dtb {
-		in-partition-table = "no"
-		image = "idbloader.img"
-		offset = 32K
-	}
-
-	partition u-boot-dtb {
-		in-partition-table = "no"
-		image = "u-boot.itb"
-		offset = 8M
-		size = 30M
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname "$0")"
-
-install -m 0644 -D "$BOARD_DIR"/extlinux.conf "$TARGET_DIR"/boot/extlinux/extlinux.conf
@@ -1,40 +0,0 @@
-Libre Computer Board ROC-RK3399-PC
-===================================
-
-Build:
-
-  $ make roc_pc_rk3399_defconfig
-  $ make
-
-Files created in output directory
-=================================
-
-output/images
-
-├── bl31.elf
-├── idbloader.img
-├── Image
-├── rk3399-roc-pc.dtb
-├── rootfs.ext2
-├── rootfs.ext4 -> rootfs.ext2
-├── rootfs.tar
-├── sdcard.img
-├── u-boot.bin
-└── u-boot.itb
-
-Creating bootable SD card:
-==========================
-
-Simply invoke (as root)
-
-sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
-
-Where X is your SD card device
-
-Serial console
--------------
-
-Baudrate for this board is 1500000
-
-Wiki link:
-https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/roc-rk3399-pc.html
@@ -1,42 +0,0 @@
-# Minimal SD card image for the NXP i.MX9 boards
-#
-# We mimic the .sdcard NXP's image format:
-# * the SD card must have 32 kB free space at the beginning,
-# * U-Boot is integrated into imx9-boot-sd.bin and is dumped as is,
-# * a FAT partition at offset 8MB is containing Image and DTB files
-# * a single root filesystem partition is required (ext2, ext3 or ext4)
-#
-
-image boot.vfat {
-	vfat {
-		label = "boot"
-		files = {
-			%FILES%
-		}
-	}
-
-	size = 64M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition imx-boot {
-		in-partition-table = "no"
-		image = "imx9-boot-sd.bin"
-		offset = %IMXOFFSET%
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-		offset = 8M
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext2"
-	}
-}
@@ -63,8 +63,6 @@ main ()
 		dd if=${BINARIES_DIR}/u-boot-hash.bin of=${BINARIES_DIR}/u-boot-atf.bin bs=1K seek=128
 		if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8=y$" ${BR2_CONFIG}; then
 			${HOST_DIR}/bin/mkimage_imx8 -soc QM -rev B0 -append ${BINARIES_DIR}/ahab-container.img -c -scfw ${BINARIES_DIR}/mx8qm-mek-scfw-tcm.bin -ap ${BINARIES_DIR}/u-boot-atf.bin a53 0x80000000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
-	        elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8DXL=y$" ${BR2_CONFIG}; then
-			${HOST_DIR}/bin/mkimage_imx8 -soc DXL -rev B0 -append ${BINARIES_DIR}/ahab-container.img -c -scfw ${BINARIES_DIR}/mx8dxl-evk-scfw-tcm.bin -ap ${BINARIES_DIR}/u-boot-atf.bin a35 0x80000000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
 		else
 			${HOST_DIR}/bin/mkimage_imx8 -soc QX -rev B0 -append ${BINARIES_DIR}/ahab-container.img -c -scfw ${BINARIES_DIR}/mx8qx-mek-scfw-tcm.bin -ap ${BINARIES_DIR}/u-boot-atf.bin a35 0x80000000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
 		fi
@@ -1,43 +0,0 @@
-#!/usr/bin/env bash
-
-main ()
-{
-	SPL_LOAD_ADDR=0x2049A000
-	ATF_LOAD_ADDR=0x204E0000
-	if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX91=y$" "${BR2_CONFIG}"; then
-		SPL_LOAD_ADDR=0x204A0000
-		ATF_LOAD_ADDR=0x204C0000
-	fi
-
-	dd if="${BINARIES_DIR}/u-boot-spl.bin" of="${BINARIES_DIR}/u-boot-spl-padded.bin" bs=4 conv=sync
-	cat "${BINARIES_DIR}/u-boot-spl-padded.bin" "${BINARIES_DIR}/ddr_fw.bin" > "${BINARIES_DIR}/u-boot-spl-ddr.bin"
-
-	"${HOST_DIR}/bin/mkimage_imx8" -commit > "${BINARIES_DIR}/mkimg.commit"
-	cat "${BINARIES_DIR}/u-boot.bin" "${BINARIES_DIR}/mkimg.commit" > "${BINARIES_DIR}/u-boot-hash.bin"
-	rm -f "${BINARIES_DIR}/mkimg.commit"
-
-	if grep -Eq "^BR2_TARGET_OPTEE_OS=y$" "${BR2_CONFIG}"; then
-		"${HOST_DIR}/bin/mkimage_imx8" -soc IMX9 -c \
-			-ap "${BINARIES_DIR}/bl31.bin" a35 ${ATF_LOAD_ADDR} \
-			-ap "${BINARIES_DIR}/u-boot-hash.bin" a35 0x80200000 \
-			-ap "${BINARIES_DIR}/tee.bin" a35 0x96000000 \
-			-out "${BINARIES_DIR}/u-boot-atf-container.img"
-	else
-		"${HOST_DIR}/bin/mkimage_imx8" -soc IMX9 -c \
-			-ap "${BINARIES_DIR}/bl31.bin" a35 ${ATF_LOAD_ADDR} \
-			-ap "${BINARIES_DIR}/u-boot-hash.bin" a35 0x80200000 \
-			-out "${BINARIES_DIR}/u-boot-atf-container.img"
-	fi
-
-	"${HOST_DIR}/bin/mkimage_imx8" -soc IMX9 -append "${BINARIES_DIR}/ahab-container.img" -c \
-		-ap "${BINARIES_DIR}/u-boot-spl-ddr.bin" a35 ${SPL_LOAD_ADDR} \
-		-out "${BINARIES_DIR}/imx9-boot-sd.bin"
-
-	flashbin_size="$(wc -c "${BINARIES_DIR}/imx9-boot-sd.bin" | awk '{print $1}')"
-	pad_cnt=$(($((flashbin_size + 0x400 - 1)) / 0x400))
-	dd if="${BINARIES_DIR}/u-boot-atf-container.img" of="${BINARIES_DIR}/imx9-boot-sd.bin" bs=1K seek=${pad_cnt}
-
-	exit $?
-}
-
-main "$@"
@@ -7,12 +7,10 @@
 #
 dtb_list()
 {
-	local DTB_LIST
-
-	DTB_LIST="$(sed -n 's/^BR2_LINUX_KERNEL_INTREE_DTS_NAME="\([\/a-z0-9 \-]*\)"$/\1/p' "${BR2_CONFIG}")"
+	local DTB_LIST="$(sed -n 's/^BR2_LINUX_KERNEL_INTREE_DTS_NAME="\([\/a-z0-9 \-]*\)"$/\1/p' ${BR2_CONFIG})"

 	for dt in $DTB_LIST; do
-		echo -n "\"$(basename "${dt}").dtb\", "
+		echo -n "\"`basename $dt`.dtb\", "
 	done
 }

@@ -23,11 +21,11 @@ dtb_list()
 #
 linux_image()
 {
-	if grep -Eq "^BR2_LINUX_KERNEL_UIMAGE=y$" "${BR2_CONFIG}"; then
+	if grep -Eq "^BR2_LINUX_KERNEL_UIMAGE=y$" ${BR2_CONFIG}; then
 		echo "\"uImage\""
-	elif grep -Eq "^BR2_LINUX_KERNEL_IMAGE=y$" "${BR2_CONFIG}"; then
+	elif grep -Eq "^BR2_LINUX_KERNEL_IMAGE=y$" ${BR2_CONFIG}; then
 		echo "\"Image\""
-	elif grep -Eq "^BR2_LINUX_KERNEL_IMAGEGZ=y$" "${BR2_CONFIG}"; then
+	elif grep -Eq "^BR2_LINUX_KERNEL_IMAGEGZ=y$" ${BR2_CONFIG}; then
 		echo "\"Image.gz\""
 	else
 		echo "\"zImage\""
@@ -36,31 +34,25 @@ linux_image()

 genimage_type()
 {
-	if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8=y$" "${BR2_CONFIG}"; then
+	if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8=y$" ${BR2_CONFIG}; then
 		echo "genimage.cfg.template_imx8"
-	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M=y$" "${BR2_CONFIG}"; then
+	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M=y$" ${BR2_CONFIG}; then
 		echo "genimage.cfg.template_imx8"
-	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM=y$" "${BR2_CONFIG}"; then
+	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM=y$" ${BR2_CONFIG}; then
 		echo "genimage.cfg.template_imx8"
-	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y$" "${BR2_CONFIG}"; then
+	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y$" ${BR2_CONFIG}; then
 		echo "genimage.cfg.template_imx8"
-	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MP=y$" "${BR2_CONFIG}"; then
+	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MP=y$" ${BR2_CONFIG}; then
 		echo "genimage.cfg.template_imx8"
-	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X=y$" "${BR2_CONFIG}"; then
+	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X=y$" ${BR2_CONFIG}; then
 		echo "genimage.cfg.template_imx8"
-	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8DXL=y$" "${BR2_CONFIG}"; then
-		echo "genimage.cfg.template_imx8"
-	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX91=y$" "${BR2_CONFIG}"; then
-		echo "genimage.cfg.template_imx9"
-	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX93=y$" "${BR2_CONFIG}"; then
-		echo "genimage.cfg.template_imx9"
-	elif grep -Eq "^BR2_LINUX_KERNEL_INSTALL_TARGET=y$" "${BR2_CONFIG}"; then
-		if grep -Eq "^BR2_TARGET_UBOOT_SPL=y$" "${BR2_CONFIG}"; then
+	elif grep -Eq "^BR2_LINUX_KERNEL_INSTALL_TARGET=y$" ${BR2_CONFIG}; then
+		if grep -Eq "^BR2_TARGET_UBOOT_SPL=y$" ${BR2_CONFIG}; then
 		    echo "genimage.cfg.template_no_boot_part_spl"
 		else
 		    echo "genimage.cfg.template_no_boot_part"
 		fi
-	elif grep -Eq "^BR2_TARGET_UBOOT_SPL=y$" "${BR2_CONFIG}"; then
+	elif grep -Eq "^BR2_TARGET_UBOOT_SPL=y$" ${BR2_CONFIG}; then
 		echo "genimage.cfg.template_spl"
 	else
 		echo "genimage.cfg.template"
@@ -69,9 +61,9 @@ genimage_type()

 imx_offset()
 {
-	if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M=y$" "${BR2_CONFIG}"; then
+	if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M=y$" ${BR2_CONFIG}; then
 		echo "33K"
-	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM=y$" "${BR2_CONFIG}"; then
+	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM=y$" ${BR2_CONFIG}; then
 		echo "33K"
 	else
 		echo "32K"
@@ -80,30 +72,29 @@ imx_offset()

 uboot_image()
 {
-	if grep -Eq "^BR2_TARGET_UBOOT_FORMAT_DTB_IMX=y$" "${BR2_CONFIG}"; then
+	if grep -Eq "^BR2_TARGET_UBOOT_FORMAT_DTB_IMX=y$" ${BR2_CONFIG}; then
 		echo "u-boot-dtb.imx"
-	elif grep -Eq "^BR2_TARGET_UBOOT_FORMAT_IMX=y$" "${BR2_CONFIG}"; then
+	elif grep -Eq "^BR2_TARGET_UBOOT_FORMAT_IMX=y$" ${BR2_CONFIG}; then
 		echo "u-boot.imx"
-	elif grep -Eq "^BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y$" "${BR2_CONFIG}"; then
+	elif grep -Eq "^BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y$" ${BR2_CONFIG}; then
 	    echo "u-boot-dtb.img"
-	elif grep -Eq "^BR2_TARGET_UBOOT_FORMAT_IMG=y$" "${BR2_CONFIG}"; then
+	elif grep -Eq "^BR2_TARGET_UBOOT_FORMAT_IMG=y$" ${BR2_CONFIG}; then
 	    echo "u-boot.img"
 	fi
 }

 main()
 {
-	local FILES IMXOFFSET UBOOTBIN GENIMAGE_CFG GENIMAGE_TMP
-	FILES="$(dtb_list) $(linux_image)"
-	IMXOFFSET="$(imx_offset)"
-	UBOOTBIN="$(uboot_image)"
-	GENIMAGE_CFG="$(mktemp --suffix genimage.cfg)"
-	GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+	local FILES="$(dtb_list) $(linux_image)"
+	local IMXOFFSET="$(imx_offset)"
+	local UBOOTBIN="$(uboot_image)"
+	local GENIMAGE_CFG="$(mktemp --suffix genimage.cfg)"
+	local GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"

 	sed -e "s/%FILES%/${FILES}/" \
 		-e "s/%IMXOFFSET%/${IMXOFFSET}/" \
 		-e "s/%UBOOTBIN%/${UBOOTBIN}/" \
-		"board/freescale/common/imx/$(genimage_type)" > "${GENIMAGE_CFG}"
+		board/freescale/common/imx/$(genimage_type) > ${GENIMAGE_CFG}

 	rm -rf "${GENIMAGE_TMP}"

@@ -114,9 +105,9 @@ main()
 		--outputpath "${BINARIES_DIR}" \
 		--config "${GENIMAGE_CFG}"

-	rm -f "${GENIMAGE_CFG}"
+	rm -f ${GENIMAGE_CFG}

 	exit $?
 }

-main "$@"
+main $@
@@ -1,61 +0,0 @@
-From 0f75b03c008eacb9818af3a56dc088e72a623d17 Mon Sep 17 00:00:00 2001
-From: Marco Felsch <m.felsch@pengutronix.de>
-Date: Wed, 9 Nov 2022 12:59:09 +0100
-Subject: [PATCH] feat(build): add support for new binutils versions
-
-Users of GNU ld (BPF) from binutils 2.39+ will observe multiple instaces
-of a new warning when linking the bl*.elf in the form:
-
-  ld.bfd: warning: stm32mp1_helper.o: missing .note.GNU-stack section implies executable stack
-  ld.bfd: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
-  ld.bfd: warning: bl2.elf has a LOAD segment with RWX permissions
-  ld.bfd: warning: bl32.elf has a LOAD segment with RWX permissions
-
-These new warnings are enbaled by default to secure elf binaries:
- - https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ba951afb99912da01a6e8434126b8fac7aa75107
- - https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=0d38576a34ec64a1b4500c9277a8e9d0f07e6774
-
-Fix it in a similar way to what the Linux kernel does, see:
-https://lore.kernel.org/all/20220810222442.2296651-1-ndesaulniers@google.com/
-
-Following the reasoning there, we set "-z noexecstack" for all linkers
-(although LLVM's LLD defaults to it) and optional add
--no-warn-rwx-segments since this a ld.bfd related.
-
-Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
-Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
-Change-Id: I9430f5fa5036ca88da46cd3b945754d62616b617
-Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
-Upstream: https://github.com/ARM-software/arm-trusted-firmware/commit/1f49db5f25cdd4e43825c9bcc0575070b80f628c
---
- Makefile | 7 ++++++-
- 1 file changed, 6 insertions(+), 1 deletion(-)
-
-diff --git a/Makefile b/Makefile
-index 1ddb7b844..470956b19 100644
--- a/Makefile
-+++ b/Makefile
-@@ -416,6 +416,8 @@ endif
- 
- GCC_V_OUTPUT		:=	$(shell $(CC) -v 2>&1)
- 
-+TF_LDFLAGS		+=	-z noexecstack
-+
- # LD = armlink
- ifneq ($(findstring armlink,$(notdir $(LD))),)
- TF_LDFLAGS		+=	--diag_error=warning --lto_level=O1
-@@ -442,7 +444,10 @@ TF_LDFLAGS		+=	$(subst --,-Xlinker --,$(TF_LDFLAGS_$(ARCH)))
- 
- # LD = gcc-ld (ld) or llvm-ld (ld.lld) or other
- else
-TF_LDFLAGS		+=	--fatal-warnings -O1
-+# With ld.bfd version 2.39 and newer new warnings are added. Skip those since we
-+# are not loaded by a elf loader.
-+TF_LDFLAGS		+=	$(call ld_option, --no-warn-rwx-segments)
-+TF_LDFLAGS		+=	-O1
- TF_LDFLAGS		+=	--gc-sections
- # ld.lld doesn't recognize the errata flags,
- # therefore don't add those in that case
-- 
-2.30.2
-
@@ -1,51 +0,0 @@
-From b2a94de52ae4a940a87d569815b19d3fa92dd32a Mon Sep 17 00:00:00 2001
-From: Tom Hochstein <tom.hochstein@nxp.com>
-Date: Mon, 16 May 2022 13:45:16 -0500
-Subject: [PATCH] LF-7968-01 fix(Makefile): Suppress array-bounds error
-
-The array-bounds error is triggered now in cases where it was silent
-before, causing errors like:
-
-```
-plat/imx/imx8m/hab.c: In function 'imx_hab_handler':
-plat/imx/imx8m/hab.c:64:57: error: array subscript 0 is outside array bounds of 'uint32_t[0]' {aka 'unsigned int[]'} [-Werror=array-bounds]
-   64 | #define HAB_RVT_CHECK_TARGET_ARM64      ((unsigned long)*(uint32_t *)(HAB_RVT_BASE + 0x18))
-      |                                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-```
-
-The error is a false-positive and is entered as a bug [1]. The problem
-is fixed partially in GCC 12 and fully in GCC 13 [2].
-
-The partial fix does not work here because the constant addresses used
-are less than the 4kB boundary chosen for the partial fix, so suppress
-the error until GCC is upgraded to 13.
-
-[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578
-[2] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578#c39
-
-Upstream-Status: Inappropriate [other]
-Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
-Signed-off-by: Jacky Bai <ping.bai@nxp.com>
-Reviewed-by: Ye Li <ye.li@nxp.com>
-Signed-off-by: Brandon Maier <brandon.maier@collins.com>
-Upstream: https://github.com/nxp-imx/imx-atf/commit/058bf0f104115037d03e277f079825ef3659c5b9
---
- Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/Makefile b/Makefile
-index c87c3ae08..2d6b90f47 100644
--- a/Makefile
-+++ b/Makefile
-@@ -346,7 +346,7 @@ WARNINGS	+=		-Wshift-overflow -Wshift-sign-overflow \
- endif
- 
- ifneq (${E},0)
-ERRORS := -Werror
-+ERRORS := -Werror -Wno-error=array-bounds
- endif
- 
- CPPFLAGS		=	${DEFINES} ${INCLUDES} ${MBEDTLS_INC} -nostdinc	\
-- 
-2.41.0
-
@@ -1 +0,0 @@
-CONFIG_IMX_SDMA=m
@@ -1,69 +0,0 @@
-******************************
-Freescale i.MX8DXL WEVK board
-******************************
-
-This file documents the Buildroot support for the Freescale i.MX8DXL WEVK
-board.
-
-Build
-=====
-
-First, configure Buildroot for the i.MX8DXL WEVK board:
-
-  make freescale_imx8dxlevk_defconfig
-
-Build all components:
-
-  make
-
-You will find in output/images/ the following files:
-  - ahab-container.img
-  - bl31.bin
-  - boot.vfat
-  - Image
-  - imx8-boot-sd.bin
-  - imx8dxl-evk.dtb
-  - mkimg.commit
-  - mx8dxl-ddr3-evk-scfw-tcm.bin
-  - mx8dxl-evk-scfw-tcm.bin
-  - mx8dxl-phantom-mek-scfw-tcm.bin
-  - mx8dxl-val-scfw-tcm.bin
-  - rootfs.ext2
-  - rootfs.ext4
-  - rootfs.tar
-  - sdcard.img
-  - u-boot-atf.bin
-  - u-boot.bin
-  - u-boot-hash.bin
-
-Create a bootable SD card
-=========================
-
-To determine the device associated to the SD card have a look in the
-/proc/partitions file:
-
-  cat /proc/partitions
-
-Buildroot prepares a bootable "sdcard.img" image in the output/images/
-directory, ready to be dumped on a SD card. Launch the following
-command as root:
-
-  dd if=output/images/sdcard.img of=/dev/<your-sd-device>
-
-*** WARNING! This will destroy all the card content. Use with care! ***
-
-For details about the medium image layout, see the definition in
-board/freescale/common/imx/genimage.cfg.template_imx8.
-
-Boot the i.MX8DXL WEVK board
-============================
-
-To boot your newly created system:
- insert the SD card in the SD slot of the board;
- Configure the boot switch as follows:
-SW1:	ON	ON	OFF	OFF
- put a micro USB cable into the Debug USB Port and connect using a terminal
-  emulator at 115200 bps, 8n1;
- power on the board.
-
-Enjoy!
@@ -1,3 +0,0 @@
-# Use the upstream devicetree name for EVK board
-# Revert https://github.com/nxp-imx/uboot-imx/commit/a60e787a6e35b9c14c391e03d41468e4ad63d598
-CONFIG_DEFAULT_FDT_FILE="imx8mp-evk.dtb"
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  cfb927722272897f850681c78d5f129b0883a8efaba9c52d30e029086524f7ff  imx-atf-lf-6.1.55-2.2.0.tar.gz
@@ -1 +0,0 @@
-../linux/linux.hash
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  eb94414f952444289c0af8ad82afa0dc2d07e08f9000ccd2cc39f11da5b494ea  linux-imx-lf-6.1.55-2.2.0.tar.gz
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  64441ee5bf3d5011e7853c028d06211b6f0439d21e147a8f36972c95a07ae9ac  uboot-imx-lf-6.1.55-2.2.0.tar.gz
@@ -1,77 +0,0 @@
-*********************
-NXP i.MX93 EVK board
-*********************
-
-This file documents the Buildroot support for the i.MX 93 EVK board.
-
-Build
-=====
-
-First, configure Buildroot for the i.MX 93 EVK board:
-
-  make freescale_imx93evk_defconfig
-
-Build all components:
-
-  make
-
-You will find in output/images/ the following files:
-  - ahab-container.img
-  - bl31.bin
-  - boot.vfat
-  - ddr_fw.bin
-  - Image
-  - imx93-11x11-evk.dtb
-  - imx9-boot-sd.bin
-  - lpddr4_pmu_train_fw.bin
-  - rootfs.ext2
-  - rootfs.ext4
-  - rootfs.tar
-  - sdcard.img
-  - u-boot-atf-container.img
-  - u-boot.bin
-  - u-boot-hash.bin
-  - u-boot-spl.bin
-  - u-boot-spl-ddr.bin
-  - u-boot-spl-padded.bin
-
-Create a bootable SD card
-=========================
-
-To determine the device associated to the SD card have a look in the
-/proc/partitions file:
-
-  cat /proc/partitions
-
-Buildroot prepares a bootable "sdcard.img" image in the output/images/
-directory, ready to be dumped on a SD card. Launch the following
-command as root:
-
-  dd if=output/images/sdcard.img of=/dev/<your-sd-device>
-
-*** WARNING! This will destroy all the card content. Use with care! ***
-
-For details about the medium image layout, see the definition in
-board/freescale/common/imx/genimage.cfg.template_imx9.
-
-Boot the i.MX 93 EVK board
-===============================
-
-To boot your newly created system (refer to the i.MX 93 EVK Documentation
-[1] for guidance):
- insert the SD card in the SD slot of the board;
- Configure the switches as follows:
-SW1301: 0100 SW1301[1-4]
- put a micro USB cable into the Debug USB Port and connect using a terminal
-  emulator at 115200 bps, 8n1;
- power on the board.
-
-Note: the debug USB connector presents 4 UARTs (for example /dev/ttyUSB[0-3]),
-the Cortex-A55 UART should be the 3rd one (in the previous example, /dev/ttyUSB2).
-Refer to the documentation [1] for more details.
-
-Enjoy!
-
-References
-==========
-[1] https://www.nxp.com/document/guide/getting-started-with-the-i-mx93-evk:GS-IMX93EVK
@@ -1,40 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"imxrt1050-evk.dtb",
-		}
-	}
-
-	size = 8M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition SPL {
-		in-partition-table = "no"
-		image = "SPL"
-		offset = 1K
-		size = 127K
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot.img"
-		offset = 128K
-		size = 512K
-	}
-
-	partition boot {
-		partition-type = 0xc
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
@@ -1,30 +0,0 @@
-NXP i.MXRT1050 EVK board
------------------------
-
-i.MX RT1050 are NXP's crossover MCUs. They combine the high performance and high
-level of integration of an applications processors with the ease-of-use and
-real-time functionality of a microcontroller. The i.MX RT1050 MCU runs on the Arm
-Cortex-M7 core at 600 MHz.
-https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/i-mx-rt1050-evaluation-kit:MIMXRT1050-EVK
-
-To build a minimal support for this board:
-
-$ make imxrt1050-evk_defconfig
-$ make
-
-Buildroot prepares a bootable "sdcard.img" image in the output/images/
-directory, ready to be flashed into the SD card:
-
-$ dd if=output/images/sdcard.img of=/dev/sdX
-Where 'sdX' is the device node of the uSD.
-
-Jumper settings:
-
-   SW7: 1 0 1 0
-
-Where 0 means bottom position and 1 means top position (from the
-switch label numbers reference).
-
-Connect the USB cable between the EVK and the PC for the console.
-
-Insert the micro SD card in the board, power it up and U-Boot messages should come up.
@@ -1,2 +0,0 @@
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="setenv bootargs console=ttyLP0 root=/dev/mmcblk0p2 rw earlycon rootwait;load mmc 0:1 0x80800000 imxrt1050-evk.dtb;load mmc 0:1 0x80000000 zImage;bootz 0x80000000 - 0x80800000"
@@ -8,16 +8,6 @@ for more details about the board and the QorIQ Layerscape SoC, see the following
  - https://www.nxp.com/design/qoriq-developer-resources/layerscape-ls1028a-reference-design-board:LS1028ARDB
  - https://www.nxp.com/LS1028A

-for the software NXP LSDK (Layerscape Software Development Kit), see
-  - https://www.nxp.com/docs/en/user-guide/LSDKUG_Rev21.08.pdf
-
-the components from NXP are:
-  - rcw, LSDK 21.08
-  - atf (fork), LSDK 21.08
-  - uboot (fork), LSDK 21.08
-  - cadence-dp-firmware (blob), LSDK 20.12
-  - linux (fork), LSDK 21.08
-
 Build
 =====

@@ -68,20 +58,3 @@ To boot your newly created system:
 - put a DB9F cable into the UART1 Port and connect using a terminal
  emulator at 115200 bps, 8n1;
 - power on the board.
-
-The Cadence DP (Display Port) firmware must loaded from uboot with the following commands:
-
-  => ext2load mmc 0 0x80000000 /boot/ls1028a-dp-fw.bin
-  102464 bytes read in 24 ms (4.1 MiB/s)
-  => hdp load 0x80000000 0x2000
-  Loading hdp firmware from 0x0000000080000000 offset 0x0000000000002000
-  Loading hdp firmware Complete
-  => boot
-
-The interfaces of Ethernet switch (Felix DSA) are bring up with the following commands:
-
-  ip link set eno2 up
-  ip link set swp0 up
-  ip link set swp1 up
-  ip link set swp2 up
-  ip link set swp3 up
@@ -1,4 +1,4 @@
 label ls1028ardb-buildroot
  kernel /boot/Image
  devicetree /boot/fsl-ls1028a-rdb.dtb
-  append root=/dev/mmcblk0p1 rootwait video=1920x1080-32@60 cma=256M
+  append root=/dev/mmcblk0p1 rootwait
@@ -1,29 +0,0 @@
-image sdcard.img {
-	hdimage {
-	}
-
-	partition fsbl {
-		offset = 4K
-		in-partition-table = "no"
-		image = "bl2_sd.pbl"
-	}
-
-	partition ssbl {
-		offset = 1M
-		in-partition-table = "no"
-		image = "fip.bin"
-	}
-
-	partition fman {
-		offset = 9M
-		in-partition-table = "no"
-		image = "fsl_fman_ucode_ls1046_r1.0_106_4_18.bin"
-	}
-
-	partition rootfs {
-		offset = 16M
-		partition-type = 0x83
-		bootable = "true"
-		image = "rootfs.ext4"
-	}
-}
@@ -1,90 +0,0 @@
-**************
-NXP LS1046A-FRWY
-**************
-
-This file documents the Buildroot support for the LS1046A Freeway Board.
-
-for more details about the board and the QorIQ Layerscape SoC, see the following pages:
-  - https://www.nxp.com/design/software/qoriq-developer-resources/ls1046a-freeway-board:FRWY-LS1046A
-  - https://www.nxp.com/FRWY-LS1046A
-  - https://www.nxp.com/docs/en/quick-reference-guide/FRWY-LS1046AGSG.pdf
-
-for the software NXP LSDK (Layerscape Software Development Kit), see
-  - https://www.nxp.com/docs/en/user-guide/LSDKUG_Rev21.08.pdf
-
-the components from NXP are:
-  - rcw, LSDK 21.08
-  - atf (fork), LSDK 21.08
-  - uboot (fork), LSDK 21.08
-  - qoriq-fm-ucode (blob), LSDK 21.08
-  - linux (fork), LSDK 21.08
-
-Build
-=====
-
-First, configure Buildroot for the LS1046A-FRWY board:
-
-  make ls1046a-frwy_defconfig
-
-Build all components:
-
-  make
-
-You will find in output/images/ the following files:
-  - bl2_sd.pbl
-  - fip.bin
-  - fsl_fman_ucode_ls1046_r1.0_106_4_18.bin
-  - fsl_fman_ucode_ls1046_r1.0_108_4_9.bin
-  - fsl-ls1046a-frwy.dtb
-  - fsl-ls1046a-frwy-sdk.dtb
-  - Image
-  - PBL.bin
-  - rootfs.ext2
-  - rootfs.ext4
-  - sdcard.img
-  - u-boot.bin
-
-Create a bootable SD card
-=========================
-
-To determine the device associated to the SD card have a look in the
-/proc/partitions file:
-
-  cat /proc/partitions
-
-Buildroot prepares a bootable "sdcard.img" image in the output/images/
-directory, ready to be dumped on a SD card. Launch the following
-command as root:
-
-  dd if=output/images/sdcard.img of=/dev/sdX
-
-*** WARNING! This will destroy all the card content. Use with care! ***
-
-For details about the medium image layout, see the definition in
-board/freescale/ls1046a-frwy/genimage.cfg.
-
-Boot the LS1046A-FRWY board
-=========================
-
-To boot your newly created system:
- insert the SD card in the SD slot of the board;
- Configure the switches SW1[1:9] = 0_0100_0000 (select SD Card boot option)
- put a Micro-USB cable into UART1 Port and connect using a terminal emulator
-  at 115200 bps, 8n1. Or remove the jumper on J72, connect a USB to TTL cable
-  to J73, and connect using a terminal emualtor at 115200 bps, 8n1.
- power on the board.
-
-The front panel Ethernet connectors are off at boot, to bring them up run the
-following commands.
-
-1G PORT1
-  ip link set eth1 up
-
-1G PORT2
-  ip link set eth2 up
-
-1G PORT3
-  ip link set eth0 up
-
-1G PORT4
-  ip link set eth3 up
@@ -1,4 +0,0 @@
-label ls1046afrwy-buildroot
-  kernel /boot/Image
-  devicetree /boot/fsl-ls1046a-frwy-sdk.dtb
-  append console=ttyS0,115200 root=/dev/mmcblk0p1 earlycon=uart8250,mmio,0x21c0500 rootwait
@@ -1,38 +0,0 @@
-# Minimal SD card image for the ICnova A20 SomPi on ADB4006
-# Based in the Cubieboard2 genimage.cfg
-
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"sun7i-a20-icnova-a20-adb4006.dtb",
-			"boot.scr"
-		}
-	}
-
-	size = 10M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot-sunxi-with-spl.bin"
-		offset = 8K
-		size = 1016K # 1MB - 8KB
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}
@@ -1 +0,0 @@
-CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
@@ -154,9 +154,9 @@ CONFIG_TUN=y
 # CONFIG_NET_VENDOR_SILAN is not set
 # CONFIG_NET_VENDOR_SIS is not set
 # CONFIG_NET_VENDOR_SMSC is not set
-CONFIG_STMMAC_ETH=y
+CONFIG_STMMAC_ETH=m
 # CONFIG_STMMAC_PLATFORM is not set
-CONFIG_STMMAC_PCI=y
+CONFIG_STMMAC_PCI=m
 # CONFIG_NET_VENDOR_SUN is not set
 # CONFIG_NET_VENDOR_TEHUTI is not set
 # CONFIG_NET_VENDOR_TI is not set
@@ -306,6 +306,3 @@ CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_VIRTUALIZATION is not set
 CONFIG_CRC_T10DIF=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_IP_PNP=y
@@ -1,5 +0,0 @@
-default buildroot
-label buildroot
-   kernel /Image
-   devicetree /meson-g12b-a311d-khadas-vim3.dtb
-append root=/dev/mmcblk0p2 rootwait console=ttyAML0,115200
--- a/Show More
+++ b/Show More