Fixes CVE-2024-6387: Unauthenticated root login because of signal
handler race condition.
Drop upstream patch and autoreconf.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 4ac2cc5bee)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Previously, these tests had the potential for timing out with the
default 5 second timeout value if initializing /dev/urandom took too
long.
Now the tests use a 10 second timeout value.
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 9bc3bbce38)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Prior to b7d251293a, txaio would test both asyncio and twisted.
Add back the twisted sample and include the twisted package in the
config so both modes of the package are tested.
Fixes: b7d251293a ("package/python-txaio: drop python 2 support")
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 41b08a779b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerability:
CVE-2024-10573: An out-of-bounds write flaw was found in mpg123 when
handling crafted streams. When decoding PCM, the libmpg123 may write past
the end of a heap-located buffer. Consequently, heap corruption may happen,
and arbitrary code execution is not discarded. The complexity required to
exploit this flaw is considered high as the payload must be validated by the
MPEG decoder and the PCM synth before execution. Additionally, to
successfully execute the attack, the user must scan through the stream,
making web live stream content (such as web radios) a very unlikely attack
vector.
https://www.openwall.com/lists/oss-security/2024/10/30/2
Release notes:
https://sourceforge.net/p/mpg123/mailman/message/58834094/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 35d2880e33)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerability:
CVE-2024-8508: A vulnerability has been discovered in Unbound when handling
replies with very large RRsets that Unbound needs to perform name
compression for.
https://nlnetlabs.nl/downloads/unbound/CVE-2024-8508.txt
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Julien: update pgp key id in hash file]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 3f98b643fb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The error was introduced by the libcurl bump to 8.12.0 with buildroot
commit 2da031c2e5.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit e85cd58fc5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 52154e5206 (package/zstd: build multithreaded library if
supported) added an override of a previously defined variable, so an
explicit check-package exception was added in 0f0e913f10
(package/zstd: rework build and install). Eventually, in 253a951c4f
(package/zstd: fix build without threads) the variable override was
removed.
However, the check-package exception was left out during the rework in
253a951c4f, so it now excludes nothing.
Drop this exception now.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit ad25dd6159)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As pointed out by shellcheck, the exit code of the start/stop/restart/reload
command is clobbered by the 'echo "FAIL'" statement:
In package/mdnsd/S50mdnsd line 52:
exit $?
^-- SC2320 (warning): This $? refers to echo/printf, not a previous command. Assign to variable to avoid it being overwritten.
So introduce a $status variable to keep track of it, similar to how it is
done in S40iwd.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit be20c12e15)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As host-heimdal is only used by samba4, and samba4 already depends on
host-flex and host-bison, the build issue fixed by this commit is not
directly visible, but can be reproduced by doing "make host-heimdal"
for example in our official Buildroot Docker container:
/home/thomas/projets/buildroot/outputs/foo/build/host-heimdal-f4faaeaba371fff3f8d1bc14389f5e6d70ca8e17/missing: line 81: flex: command not found
WARNING: 'flex' is missing on your system.
You should only need it if you modified a '.l' file.
You may want to install the Fast Lexical Analyzer package:
<https://github.com/westes/flex>
make[4]: *** [Makefile:753: lex.c] Error 127
[...]
updating lex.yylex.c
../../ylwrap: line 176: -d: command not found
make[4]: *** [Makefile:756: parse.c] Error 127
Fix this by adding the missing dependencies.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 44e739d031)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Buildroot fails to build Linux kernel configurations where BTF support
is enabled together with zstd compression of debugging information.
The reason is in host-elfutils zstd support being explicitly disabled.
So enable zstd support in host-elfutils by default to fix such builds.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 315672feec)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Chris email address at boundarydevices is bouncing:
Chris Dimich is no longer with Ezurio. Please contact Gary Bisson by
email at Gary.Bisson@ezurio.com. Thank you!"
Move his package to Gary Bisson as suggested.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
(cherry picked from commit 892d1ae27f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go1.22.12 (released 2025-02-04) includes security fixes to the
crypto/elliptic package, as well as bug fixes to the compiler and the go
command.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Take a patch from meta-riscv, which was submitted upstream by Khem Raj
to fix a build issue on RISC-V 32-bit musl configurations. This issue
has been discussed with musl developers who believe this is a Busybox
issue. The patch from Khem works around the issue by making it a
runtime failure just affecting hwclock on RISC-V 32-bit musl instead
of a build failure. The correct fix is not really clear, as there
seems to be a disagreement between Busybox people and musl people on
what the C library settimeofday() function should do, and that's why
Busybox is bypassing settimeofday() on musl by making a direct system
call, except this system call doesn't exist on RISC-V 32-bit.
In the mean time, this patch fixes the long standing Gitlab CI issue:
- tests.toolchain.test_external_bootlin.TestExternalToolchainBootlinRiscv32ilp32dMuslStable
https://gitlab.com/buildroot.org/buildroot/-/jobs/8954291684
- tests.toolchain.test_external_bootlin.TestExternalToolchainBootlinRiscv32ilp32dMuslBleedingEdge
https://gitlab.com/buildroot.org/buildroot/-/jobs/8954291683
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit a956eeb96b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds patches, which were all backported from upstream, or
submitted upstream, and that fix various CVEs. To facilitate the
backporting work, we took the backports from openembedded-core.
CVE-2021-42380: this one is not marked by NVD as affecting 1.36.1, but
its fix was merged after 1.36.1, so it seems like the NVD data is
incorrect. Therefore, no need for a BUSYBOX_IGNORE_CVES entry. Patch
is upstream, backport taken from openembedded-core.
CVE-2023-42363, CVE-2023-42364, CVE-2023-42365: patches are upstream,
backports taken from openembedded-core.
CVE-2023-42366: patch has been submitted upstream but not merged,
patch taken from openembedded-core.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 75c594d446)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cuserid is deprecated and breaks the compilation on some new toolchains.
This patch fixes this issue.
Fixes:
#81
Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit a141b117e0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It fixes an arbitrary file overwrite vulnerability in the readline.sh.
(CVE-2024-54661)
see - http://www.dest-unreach.org/socat/contrib/socat-secadv9.html
README hash changed due to version update.
Note: Buildroot is not impacted by this vulnerability as the
readline.sh is not installed on target.
Quoting changelog [1]:
Mitigating factors: readline.sh is usually neither installed in a bin
directory nor is it documented. Major Linux distributions install it in
examples/ or doc/; however it is invoked by test.sh script.
[1] https://repo.or.cz/socat.git/blob/refs/tags/tag-1.8.0.2:/CHANGES
Signed-off-by: Akhilesh Nema <nemaakhilesh@gmail.com>
[Julien: add note that Buildroot is not impacted in commit log]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit d70df3ab44)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
7.2.6:
- (CVE-2024-31449) Lua library commands may lead to stack overflow and
potential RCE
- (CVE-2024-31227) Potential Denial-of-service due to malformed ACL
selectors
- (CVE-2024-31228) Potential Denial-of-service due to unbounded pattern
matching
7.2.7:
- (CVE-2024-46981) Lua script commands may lead to remote code execution
- (CVE-2024-51741) Denial-of-service due to malformed ACL selectors
https://github.com/redis/redis/releases/tag/7.2.6https://github.com/redis/redis/releases/tag/7.2.7
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit f3e99436ee)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go1.22.11 (released 2025-01-16) includes security fixes to the crypto/x509
and net/http packages, as well as bug fixes to the compiler, the runtime,
and the net package.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerabilities:
Worker permission bypass via InternalWorker leak in diagnostics
(CVE-2025-23083) - (high)
With the aid of the diagnostics_channel utility, an event can be hooked into
whenever a worker thread is created. This is not limited only to workers
but also exposes internal workers, where an instance of them can be fetched,
and its constructor can be grabbed and reinstated for malicious usage.
This vulnerability affects Permission Model users (--permission) on Node.js
v20, v22, and v23.
GOAWAY HTTP/2 frames cause memory leak outside heap (CVE-2025-23085) - (medium)
A memory leak could occur when a remote peer abruptly closes the socket
without sending a GOAWAY notification. Additionally, if an invalid header
was detected by nghttp2, causing the connection to be terminated by the
peer, the same leak was triggered. This flaw could lead to increased memory
consumption and potential denial of service under certain conditions.
This vulnerability affects HTTP/2 Server users on Node.js v18.x, v20.x, v22.x and v23.x.
For more details, see the announcement:
https://nodejs.org/en/blog/vulnerability/january-2025-security-releases
Update the LICENSE hash for a reformatting and removal of the highlight.js license:
https://github.com/nodejs/node/commit/6ca0cfc6026aee0788132476215ec48d035ad633https://github.com/nodejs/node/commit/1dfd238781bc7ac0f8e0be14bf88a9c61abeb0e9
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Fixes the following security issues:
- CVE-2024-56826: A flaw was found in the OpenJPEG project. A heap buffer
overflow condition may be triggered when certain options are specified
while using the opj_decompress utility. This can lead to an application
crash or other undefined behavior.
https://access.redhat.com/security/cve/CVE-2024-56826
- CVE-2024-56827: A flaw was found in the OpenJPEG project. A heap buffer
overflow condition may be triggered when certain options are specified
while using the opj_decompress utility. This can lead to an application
crash or other undefined behavior.
https://access.redhat.com/security/cve/CVE-2024-56827
Release notes: https://github.com/uclouvain/openjpeg/blob/v2.5.3/NEWS.md
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 3bfa5ebcbf)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the Xen tools are built, a number of init scripts are installed to
the target.
Some of those Xen scripts require bash to run:
- /etc/init.d/S50xencommons
- /etc/init.d/S50xen-watchdog
- /etc/init.d/S60xendomains
- /etc/xen/scripts/launch-xenstore
- /usr/lib/xen/bin/xendomains
Make sure to select bash when the Xen tools are selected (we need to
select "busybox show others" for that, too).
Suggested-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit bf18fd4cd1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following vulnerability:
CVE-2024-56374: Potential denial-of-service vulnerability in IPv6 validation
Lack of upper bound limit enforcement in strings passed when performing IPv6
validation could lead to a potential denial-of-service attack. The
undocumented and private functions clean_ipv6_address and
is_valid_ipv6_address were vulnerable, as was the
django.forms.GenericIPAddressField form field, which has now been updated to
define a max_length of 39 characters.
The django.db.models.GenericIPAddressField model field was not affected.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The legal manifest currently stores the $(PKG)_VERSION variable.
However, that variable undergoes a set of changes so that it is
suitable for creating files and Makefile rules; that new value
is purely a technical, internal detail of how Buildroot handles
things.
In the legal manifest, we need access to the real value for the
version, as this is what will allow actual references to the
upstream package. If the version string is mangled, like slashes
replaced with underscores, this introduces ambiguities as to what
exactly the version is.
In Buildroot, there is no package, with a constant version, that
exhibits that issue; for those packages where it is possible to
set a custom git tree and version, like linux or uboot, such a
custom tree can have tags with a slash (not a colon or a space,
forbidden by git); packages in a br2-external can also use such
version strings as well.
The packages that do have such versions are not legion, but they
do exist. For example, Apache's ant buildsystem does use a slash
in their reelase tags, like rel/1.10.15:
https://github.com/apache/ant/tags
Change the legal manifest to include the actual, original value
as was set in the .mk file.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 686694792b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit d10d22221f (utils/get-developers: read patch from stdin
when it's not a tty), get-developers accepts to read a patch fromn its
stdin when it is not a tty.
Add a test for this.
Reported-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 29e1af8430)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
get-developers will check its stdin to decide whether it is a tty or
not, and behave differently whether it is or not. So, when we run the
tests, we need an actual tty.
However, when running in a CI pipeline, like on Gitlab-CI, there is no
tty available on stdin.
Fake one. We don't need anything too fancy, so just a slave pty will
suffice.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/8830671800
Fixes: d10d22221f (utils/get-developers: read patch from stdin when
it's not a tty)
Reported-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 3778f704cd)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following vulnerabilities:
- CVE-2024-50349:
Printing unsanitized URLs when asking for credentials made the
user susceptible to crafted URLs (e.g. in recursive clones) that
mislead the user into typing in passwords for trusted sites that
would then be sent to untrusted sites instead.
- CVE-2024-52006
Git may pass on Carriage Returns via the credential protocol to
credential helpers which use line-reading functions that
interpret said Carriage Returns as line endings, even though Git
did not intend that.
For more details, see the announcement:
https://lore.kernel.org/git/xmqq5xmh46oc.fsf@gitster.g/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bugfix release fixing regressions in 3.4.0:
- fixed handling of -H flag with conflict in internal flag values
- fixed a use after free in logging of failed rename
- fixed build on systems without openat()
- removed dependency on alloca() in bundled popt
For more details, see:
https://download.samba.org/pub/rsync/NEWS#3.4.1
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 593755f527)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Release note:
https://download.samba.org/pub/rsync/NEWS#3.4.0
Fixes the following vulnerabilities:
CVE-2024-12084: Heap Buffer Overflow in Rsync due to Improper Checksum
Length Handling
Description: A heap-based buffer overflow flaw was found in the rsync
daemon. This issue is due to improper handling of attacker-controlled
checksum lengths (s2length) in the code. When MAX_DIGEST_LEN exceeds the
fixed SUM_LENGTH (16 bytes), an attacker can write out of bounds in the
sum2 buffer.
CVE-2024-12085: Info Leak via Uninitialized Stack Contents
Description: A flaw was found in the rsync daemon which could be triggered
when rsync compares file checksums. This flaw allows an attacker to
manipulate the checksum length (s2length) to cause a comparison between a
checksum and uninitialized memory and leak one byte of uninitialized stack
data at a time.
CVE-2024-12086: Rsync Server Leaks Arbitrary Client Files
Description: A flaw was found in rsync. It could allow a server to
enumerate the contents of an arbitrary file from the client's machine. This
issue occurs when files are being copied from a client to a server. During
this process, the rsync server will send checksums of local data to the
client to compare with in order to determine what data needs to be sent to
the server. By sending specially constructed checksum values for arbitrary
files, an attacker may be able to reconstruct the data of those files
byte-by-byte based on the responses from the client.
CVE-2024-12087: Path Traversal Vulnerability in Rsync
Description: A path traversal vulnerability exists in rsync. It stems from
behavior enabled by the `--inc-recursive` option, a default-enabled option
for many client options and can be enabled by the server even if not
explicitly enabled by the client. When using the `--inc-recursive` option,
a lack of proper symlink verification coupled with deduplication checks
occurring on a per-file-list basis could allow a server to write files
outside of the client's intended destination directory. A malicious server
could write malicious files to arbitrary locations named after valid
directories/paths on the client.
CVE-2024-12088: --safe-links Option Bypass Leads to Path Traversal
Description: A flaw was found in rsync. When using the `--safe-links`
option, rsync fails to properly verify if a symbolic link destination
contains another symbolic link within it. This results in a path traversal
vulnerability, which may lead to arbitrary file write outside the desired
directory.
CVE-2024-12747: Race Condition in Rsync Handling Symbolic Links
Description: A flaw was found in rsync. This vulnerability arises from a
race condition during rsync's handling of symbolic links. Rsync's default
behavior when encountering symbolic links is to skip them. If an attacker
replaced a regular file with a symbolic link at the right time, it was
possible to bypass the default behavior and traverse symbolic links.
Depending on the privileges of the rsync process, an attacker could leak
sensitive information, potentially leading to privilege escalation.
For more details, see the advisory:
https://www.openwall.com/lists/oss-security/2025/01/14/3
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Julien: add link to release note]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 017d74c943)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_ARCH_NEEDS_GCC_AT_LEAST_X guards has been introduced by [1] to
prevent selecting an external toolchain that did not support the GCC
arch tuning the user had selected.
But it was not changed while updating to version 13.2-rel1.
Fixes: 50ae5ea963
[1] eed1670d8a
Cc: Antoine Coutant <antoine.coutant@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 7ffc6ae7d9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_ARCH_NEEDS_GCC_AT_LEAST_X guards has been introduced by [1] to
prevent selecting an external toolchain that did not support the GCC
arch tuning the user had selected.
But it was not changed while updating to version 13.2-rel1.
Fixes: 7b4b3c2c78
[1] eed1670d8a
Cc: Antoine Coutant <antoine.coutant@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 2999677233)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_ARCH_NEEDS_GCC_AT_LEAST_X guards has been introduced by [1] to
prevent selecting an external toolchain that did not support the GCC
arch tuning the user had selected.
But it was not updated while updating to version 13.2-rel1.
Fixes: 0dd599d171
[1] eed1670d8a
Cc: Antoine Coutant <antoine.coutant@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 203abefcf6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Usually, ubxtool, a python-based tool to drive u-blox devices, connects
to a gpsd instance and delegates to it the responsibility to write to
and read from the actual device. This is sane, because a serial device
can only be opened once, and if gpsd is running, it has that device
open.
However, in some cases, ubxtool can be used to directly talk to the
device, to pre-configure it before gpsd runs, or even in the absence of
gpsd altogether. This is not used very often, except when setting up an
RTK base, where gpsd is not needed.
In that case, ubxtool will directly talk to the serial device. It uses
the pyserial python module. Since this is not the traditional way to
talk to the device, failure to import the module is ignored, and the
error reporting is deferred until it is actually needed, which is why we
did not catch the issue earlier. See [1] and [2].
Fixes: f3ef0723cf (package/gpsd: enable python support and modules)
[1] https://gitlab.com/gpsd/gpsd/-/blob/release-3.25/clients/ubxtool.py.in#L47
[2] https://gitlab.com/gpsd/gpsd/-/blob/release-3.25/gps/gps.py.in#L36
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Bernd Kuhls <bernd@kuhls.net>
[Julien: add link to described code portion]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 5d2f3737a1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libxcrypt has been added as a replacement for the libcrypt
implementation that was part of glibc, but dropped from glibc starting
from version 2.39.
However, libxcrypt was made available for all C libraries, and this is
unfortunately causing some problems as it can clash with the libcrypt
implementation provided by the C library.
In particular, linux-pam has been consistently failing with uclibc, in
BR2_PER_PACKAGE_DIRECTORIES=y builds, with the following build
failure:
opasswd.c: In function 'compare_password':
opasswd.c:133:27: error: invalid application of 'sizeof' to incomplete type 'struct crypt_data'
What happens is relatively tricky, but let's try to break it down:
- uclibc-ng install a stub libcrypt.a (no shared variant, as for
shared libraries, everything is in libc.so), and crypt.h
- libxcrypt installs libcrypt.so.* and crypt.h
So there is no "clash" on the library itself, but there is a clash on
the header file.
Since we're using BR2_PER_PACKAGE_DIRECTORIES=y, when building
linux-pam, we are creating the per-package STAGING_DIR by copying the
STAGING_DIR of linux-pam dependencies, i.e both the libxcrypt
STAGING_DIR and the uclibc-ng STAGING_DIR. But the latter ends up
being copied last, which means that at the end of the day, we have in
the per-package STAGING_DIR of linux-pam:
- The libcrypt.so from libxcrypt
- The crypt.h header from uclibc-ng
- The libcrypt.a from uclibc-ng
When the ./configure script of linux-pam tests whether the library has
crypt_r(), it concludes that yes it's available: and indeed
libcrypt.so from libxcrypt has it.
So it tries to use 'struct crypt_data' and 'crypt_r()', but those are
not supported in uClibc-ng, and so cannot be found in the <crypt.h>
header. So even if the ./configure script and the linux-pam code has
some logic to fallback to crypt() if crypt_r() isn't available, this
fallback doesn't trigger because the installed libcrypt.so does have
crypt_r().
Basically what happens is that uclibc-ng + libxcrypt is a combo that
violates a golden rule of our BR2_PER_PACKAGE_DIRECTORIES=y
implementation: packages shouldn't overwrite files from each other.
To avoid this situation, we make libxcrypt only installable on
glibc. This isn't a problem because as of today, BR2_PACKAGE_LIBXCRYPT
is always selected "if BR2_TOOLCHAIN_USES_GLIBC".
It should be noted though that the case of an older glibc (which still
had its own internal libcrypt) + libxcrypt continues to exist. It's
less likely to cause trouble though, as the libcrypt implementations
are much more similar.
Fixes:
http://autobuild.buildroot.net/results/560f66b0311d02dc884732221d6870ae3c38067c/
Note: we do not add a Config.in comment for this glibc dependency,
because libxcrypt really is a "replacement" library to fill in the
void left by libcrypt's removal from glibc. There isn't realy a point
showing "libxcrypt needs a toolchain w/ glibc", because with musl or
uclibc-ng, the libcrypt functionality is directly part of the C
library.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 5c0a91f729)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We are seeing build issues with linux-pam in the autobuilders such as:
md5_crypt.c: In function 'Goodcrypt_md5':
md5_crypt.c:145:13: error: implicit declaration of function 'asprintf'; did you mean 'vsprintf'? [-Wimplicit-function-declaration]
145 | if (asprintf(&passwd, "%s%.*s$%s", magic, sl, sp, buf) < 0)
| ^~~~~~~~
| vsprintf
This is due to the fact that <stdio.h> gets included without
_GNU_SOURCE being defined, and so the prototype of asprintf() is not
accessible, at least with uclibc-ng.
The _GNU_SOURCE definition is properly in linux-pam's config.h, but
config.h doesn't get properly included first everywhere. This issue
has been fixed upstream in the mean time, so we simply backport the
upstream patch.
Fixes:
http://autobuild.buildroot.net/results/49b190b3fbae3cdca4c7a08b3ab5100a937ede9e/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 001e777d50)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Buildroot commit
1f4b4ccde7 ("package/opensc: security
bump to version 0.26.0") bumped opensc from 0.24 to 0.26, and the
build started failing with:
pkcs11-tool.c:7854:45: warning: implicit declaration of function 'EVP_bf_cbc'; did you mean 'EVP_sm4_cbc'? [-Wimplicit-function-declaration]
on configurations that have BR2_PACKAGE_LIBOPENSSL_ENABLE_BLOWFISH
disabled (it is not explicitly selected by this package).
Our initial fix was to simply select
BR2_PACKAGE_LIBOPENSSL_ENABLE_BLOWFISH, but when investigating when
EVP_bf_cbc() started being used in OpenSC, we discovered it has been
in use for a while... but in code that kept being disabled from
version to version as it was broken (upstream bug
https://github.com/OpenSC/OpenSC/issues/1796), but it was apparently
forgotten to be disabled again for 0.26 (the issue is still
open). Therefore, we opted to continue disabling this known broken
part of the code, and submit an upstream PR for that
https://github.com/OpenSC/OpenSC/pull/3303, which ultimately will
clarify what is the right fix.
In the mean time, this allows to fix the build issue.
Fixes:
http://autobuild.buildroot.net/results/ca51b3e8e3ac83e2a69814caa84d9862385b956f/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 5d7ab604d2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 9c0c7846cd (support/dependencies: don't check for python
on the host), we no longer check for a host python interpreter installed
on the system.
Drop the comment in support/dependencies/check-host-python3.sh, as it is
now confusing.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 3722998a3d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit ed12e2fbed (package/libvirt: add lxc and qemu options)
introduced the definition of the 'qemu' user when the libvirt daemon
is enabled, but unconditionally uses that user in its permissions
table.
When enabling libvirt without its qemu support, for example with the
commands:
cat <<EOF >.config
BR2_aarch64=y
BR2_PACKAGE_LIBVIRT=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_TARGET_ROOTFS_EXT2=y
BR2_TOOLCHAIN_EXTERNAL=y
EOF
make olddefconfig
make
The build fails with output:
>>> Generating filesystem image rootfs.ext2
...
makedevs: unknown user name: qemu
Move the permissions needing the 'qemu' user under the same condition
the 'qemu' user is defined under. It means that a few permissions
needing root must also be moved, as they belong under a directory
needing the 'qemu' user. It also moves a few qemu-related permissions
introduced in that same commit. The list of qemu permissions is
reordered alphabetically (the others are left unchanged).
Of course, it also requires that the qemu-related directory and symlink
be moved under the same condition as well.
Reported-by: Alessandro <alex@0x65c.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Jared Bents <jared.bents@rockwellcollins.com>
[Julien: add the commands to reproduce the issue]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit da9adec149)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is very common to use the output of get-developers to add cc: lines
in the commit log.
Add an option so that get-developers reports Cc: lines ready to be
pasted in a commit log. That new option behaves similarly to the
existing -e option: it only affects the output when parsing a patch.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Julien Olivain <ju.o@free.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 717f1fdaeb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The list of reported developers is not ordered: that may leave the
impression (when receiving a patch) that a Cc is more important than
another, by virtue of being earlier in the list.
Also, the ordering changes on every call.
Report the developers in an alphabetically order, so that there is no
confusion anymore, and so the ordering is reproducible across calls.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 3177ecd260)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is very common that get-developers be used with its stdin a pipe from
git-show:
git show |./utils-get-developers -
In this case, the '-' is superfluous: we can very easily deduce that the
user wants to read stdin as the patch.
So, if no other action was requested, and stdin is not a tty, use it as
the source of the patch, and thus '-' is then no longer required.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit d10d22221f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
parser.error() reports a nice error message, that also displays a short
reminder of the available options.
Adapt the test-suite accordingly: previously, the error string was an
exact string in the stdout list, while it now is a substring in one of
the strings in stderr. The exit code changes, too.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Julien Olivain <ju.o@free.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 35f381b93e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Offloading parser.parse_args() to a helper function does not bring much,
if at all; it even is restrictive: indeed, we can't use parser.error()
to report errors and thus have to resort to a canned print+return
sequence...
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit cdcb3f56e8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The variable <pkg>_LINUX_CONFIG_FIXUPS defined in the
cryptodev-linux... has no effect. Indeed, the variable is only named
CRYPTODEV_LINUX_CONFIG_FIXUPS.
But the variable name being <pkg>_LINUX_CONFIG_FIXUPS and the package
name being CRYPTODEV_LINUX, the correct variable name is
CRYPTODEV_LINUX_LINUX_CONFIG_FIXUPS.
Prior to this commit, a configuration with cryptodev-linux enabled
would result in:
$ make VARS=PACKAGES_LINUX_CONFIG_FIXUPS printvars
$
Aka, empty, while PACKAGES_LINUX_CONFIG_FIXUPS collects in
package/pkg-generic.mk the value of the <pkg>_LINUX_CONFIG_FIXUPS
variables from all enabled packages.
With this patch applied:
$ make VARS=PACKAGES_LINUX_CONFIG_FIXUPS printvars
PACKAGES_LINUX_CONFIG_FIXUPS= @if ! grep -q '^CONFIG_CRYPTO=[my]' /; then /usr/bin/sed -i -e '/^\(# \)\?CONFIG_CRYPTO\>/d' / && echo 'CONFIG_CRYPTO=y' >> /; fi
@if ! grep -q '^CONFIG_CRYPTO_USER_API_AEAD=[my]' /; then /usr/bin/sed -i -e '/^\(# \)\?CONFIG_CRYPTO_USER_API_AEAD\>/d' / && echo 'CONFIG_CRYPTO_USER_API_AEAD=y' >> /; fi
$
As one would expect.
Fixes: 4b12336d1f ("package/cryptodev-linux: needs CONFIG_CRYPTO_USER_API_AEAD")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 9114d48b31)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
pixman fails to build with -Og or -O3 due to forced inlining
statements:
pixman-combine-float.c:370:5: error: inlining failed in call to 'always_inline' 'combine_soft_light_c': function not considered for inlining
The first occurence in the autobuilders is on May 12, 2024, but the
problem already existed before as we haven't updated pixman in a long
time. Therefore, the issue started occurring because we started
testing more random configurations.
Fixes:
https://autobuild.buildroot.org/results/2f3df7961b3181d9eef79893439ae7ebbe4415ad/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 696de595e0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Setting CONFIG_VIDEO_DEV is no sufficient as drivers/media/Kconfig has
some very convoluted logic to hide some options behind a
CONFIG_MEDIA_SUPPORT_FILTER option, unless CONFIG_EXPERT is
enabled. Due to this, several arch defconfigs don't have
CONFIG_VIDEO_DEV enabled when doing $(call
KCONFIG_ENABLE_OPT,CONFIG_VIDEO_DEV).
To fix this, we enable one of the possible options that ensures
CONFIG_VIDEO_DEV is enabled, and we've more or less arbitrarily chosen
CONFIG_MEDIA_CAMERA_SUPPORT.
Fixes:
http://autobuild.buildroot.net/results/2a337d29e7870564027bcd42bd0addd228eb6a24/
We've tried to track down which kernel version introduced this
exactly, but it's been introduced a while ago and step by step making
it difficult to pin-point which version version exactly introduced
this. But the issue has been appearing for quite some time in the
autobuilders, so it's clearly not a recent issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 75d418b59d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
HOST_CFLAGS and HOST_LDFLAGS are currently not accounted for when
building host-perl. In particular, it means that executables
built/installed by host-perl do not have a RPATH pointing to
HOST_DIR/lib, which can cause issues as libcrypt.so can now be
provided by host-libxcrypt.
This was causing check-host-rpath to complain in the situation where:
1. host-perl was built, with no RPATH, linked against the system
libcrypt.so
2. host-libxcrypt was built afterwards, installed as
HOST_DIR/lib/libcrypt.so, which made check-host-rpath complain as
HOST_DIR/bin/perl is linked against a library present in
HOST_DIR/lib but doesn't have a RPATH to HOST_DIR/lib
Fixes:
http://autobuild.buildroot.net/results/d4348d7f872ccd734795a1d071960a696148ed6a/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 65127a8a77)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The handling of BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG is currently
not doing a proper job: it is selecting ppc64le_defconfig if
BR2_powerpc64le, and using the default of "defconfig" for everything
else.
However:
- Since upstream commit 22f17b02f88b48c01d3ac38d40d2b0b695ab2d10,
which landed in Linux 6.8, the default defconfig is
ppc64le_defconfig and no longer ppc64_defconfig. This means that
despite the condition in linux.mk, we are in fact now always
building ppc64le_defconfig.
- It doesn't handle the 32-bit case, as a 64-bit defconfig gets used
by default. This causes build failures in the autobuilders.
To fix this we explicitly handle BR2_powerpc64le, BR2_powerpc64 and
BR2_powerpc, and use appropriate defconfigs for each case.
Fixes:
http://autobuild.buildroot.net/results/c15eaf2e7455aa265cc045e6d8be7cac5348d925/ (powerpc)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 82326a3d83)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 13250bf4aa)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a basic test for Xvisor RISC-V 64bit. It is running few
management and status commands. It does not start a Linux kernel.
RISC-V 64bit was chosen for this test because it was the simplest
solution to run xvisor in a qemu emulator.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit e14380b3c4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building on a s390x host, we currently end up with:
output/host/lib
output/host/lib32 -> lib
output/host/lib64
host-libopenssl installs to lib64, but since the kernel build doesn't
explicitly search there, it breaks:
>>> linux 6.6.32 Building
[...]
HOSTCC scripts/sign-file
/usr/bin/ld: cannot find -lcrypto: No such file or directory
collect2: error: ld returned 1 exit status
Fix this by creating a lib64 link instead of lib32, so we get:
output/host/lib
output/host/lib64 -> lib
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 66a5f9bc74)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit
a9aa11544a ("package/qt6/qt6svg:
backport fix for CVE-2023-32573"), a fix for security issue
CVE-2023-32573 was added to qt6svg, with the appropriate
QT6SVG_IGNORE_CVES entry.
However, all CVEs against Qt are reported by the NVD on the qt:qt
vendor/product CPE. For example:
https://nvd.nist.gov/vuln/detail/CVE-2023-32573
Therefore, the QT6SVG_IGNORE_CVES entry added has no effect, and
CVE-2023-32573 continues to be reported against our qt6base package.
The only reasonable option is to collect all such CVE ignore entries
for Qt modules into the qt6base package, which is the one that matches
with the qt:qt CPE identifier. This commit does just that, with an
hopefully appropriate comment in qt6base.mk that explains what's going
on.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 4009842cba ("package/qt6/qt6base:
backport fix for CVE-2023-51714") brought in a fix for CVE-2023-51714,
but got the QT6BASE_IGNORE_CVES update wrong, due to a copy/paste
error with the previous QT6BASE_IGNORE_CVES entry. Due to this
CVE-2023-51714 is still reported as affecting qt6base, while the
security fix is already there.
Fixes: 4009842cba ("package/qt6/qt6base: backport fix for CVE-2023-51714")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerabilities:
CVE-2022-33065: Multiple signed integers overflow in function au_read_header
in src/au.c and in functions mat4_open and mat4_read_header in src/mat4.c in
Libsndfile, allows an attacker to cause Denial of Service or other
unspecified impacts.
CVE-2024-50612: libsndfile through 1.2.2 has an ogg_vorbis.c
vorbis_analysis_wrote out-of-bounds read.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit e675ffd964)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2023-49582: Lax permissions set by the Apache Portable Runtime
library on Unix platforms would allow local users read access to named
shared memory segments, potentially revealing sensitive application data.
This issue does not affect non-Unix platforms, or builds with
APR_USE_SHMEM_SHMGET=1 (apr.h) Users are recommended to upgrade to APR
version 1.7.5, which fixes this issue.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit a60c38b381)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes build error
/home/buildroot/buildroot/output/build/wpewebkit-2.44.4/Source/WTF/wtf/StackBounds.cpp: In static member function 'static WTF::StackBounds WTF::StackBounds::newThreadStackBounds(WTF::PlatformThreadHandle)':
/home/buildroot/buildroot/output/build/wpewebkit-2.44.4/Source/WTF/wtf/StackBounds.cpp:117:5: error: 'pthread_getattr_np' was not declared in this scope; did you mean 'pthread_attr_t'?
117 | pthread_getattr_np(thread, &sattr);
using this defconfig (and libvpx bump to 1.15.0 reverted)
BR2_arm=y
BR2_TOOLCHAIN_BUILDROOT_UCLIBC=y
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_PTHREADS=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PER_PACKAGE_DIRECTORIES=y
BR2_PACKAGE_RPI_USERLAND=y
BR2_PACKAGE_LIBGTK3=y
BR2_PACKAGE_WPEWEBKIT=y
A backport of this patch should be considered because the code is
present since 2011:
https://github.com/WebKit/WebKit/blame/03f678fac7076e4d69318bfaae065e4c0eab0f9e/Source/WTF/wtf/StackBounds.cpp#L117
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 9f4a95e5c6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes build error
/home/buildroot/buildroot/output/build/webkitgtk-2.44.2/Source/WTF/wtf/StackBounds.cpp: In static member function 'static WTF::StackBounds WTF::StackBounds::newThreadStackBounds(WTF::PlatformThreadHandle)':
/home/buildroot/buildroot/output/build/webkitgtk-2.44.2/Source/WTF/wtf/StackBounds.cpp:117:5: error: 'pthread_getattr_np' was not declared in this scope; did you mean 'pthread_attr_t'?
117 | pthread_getattr_np(thread, &sattr);
using this defconfig (and libvpx bump to 1.15.0 reverted)
BR2_arm=y
BR2_TOOLCHAIN_BUILDROOT_UCLIBC=y
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_PTHREADS=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PER_PACKAGE_DIRECTORIES=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_RPI_USERLAND=y
BR2_PACKAGE_LIBGTK3=y
BR2_PACKAGE_WEBKITGTK=y
A backport of this patch should be considered because the code is
present since 2011:
https://github.com/WebKit/WebKit/blame/03f678fac7076e4d69318bfaae065e4c0eab0f9e/Source/WTF/wtf/StackBounds.cpp#L117
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 054e5c4d22)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes build error
-- Could NOT find LibDRM (missing: LibDRM_INCLUDE_DIR LibDRM_LIBRARY)
CMake Error at Source/cmake/OptionsGTK.cmake:320 (message):
libdrm is required for USE_LIBDRM
Call Stack (most recent call first):
Source/cmake/WebKitCommon.cmake:237 (include)
CMakeLists.txt:21 (include)
with this defconfig:
BR2_arm=y
BR2_TOOLCHAIN_BUILDROOT_UCLIBC=y
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_PTHREADS=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PER_PACKAGE_DIRECTORIES=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_RPI_USERLAND=y
BR2_PACKAGE_LIBGTK3=y
BR2_PACKAGE_WEBKITGTK=y
due to libdrm being enabled by default:
https://github.com/WebKit/WebKit/blob/f736325e66bfa8e85f85387299448476f3e1fb3c/Source/cmake/OptionsGTK.cmake#L59
This is a port of buildroot commit 65f8174648
for the wpewebkit package, quoting its commit message:
Pass USE_LIBDRM=OFF to the wpewebkit CMake configuration step when the
libdrm package has not been selected.
WPE WebKit can be built without libdrm support, and it will still work
with backends that use other platform-specific methods to handle
graphics buffers and/or presenting content onto an output. For example
this is the case with wpebackend-rdk configured to use rpi-userland,
which uses dispmanx to produce the output instead of DRM/KMS.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 865457e762)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds a patch, which is already in Debian, fixing the build
with gcc 14.x:
/home/autobuild/autobuild/instance-7/output-1/build/host-cdrkit-1.1.11/genisoimage/genisoimage.c:1509:17: error: implicit declaration of function 'parse_checksum_algo' [-Wimplicit-function-declaration]
1509 | if (parse_checksum_algo(optarg, &checksum_algo_iso))
| ^~~~~~~~~~~~~~~~~~~
make[3]: *** [genisoimage/CMakeFiles/genisoimage.dir/build.make:76: genisoimage/CMakeFiles/genisoimage.dir/genisoimage.o] Error 1
Fixes:
http://autobuild.buildroot.net/results/a9cca8da22774ecafdbb382697aae71f78e348f4/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 0a0de4d86c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2024-53907: Potential denial-of-service in
django.utils.html.strip_tags()
The strip_tags() method and striptags template filter are subject to a
potential denial-of-service attack via certain inputs containing large
sequences of nested incomplete HTML entities.
CVE-2024-53908: Potential SQL injection in HasKey(lhs, rhs) on Oracle
Direct usage of the django.db.models.fields.json.HasKey lookup on Oracle is
subject to SQL injection if untrusted data is used as a lhs value.
Applications that use the jsonfield.has_key lookup through the __ syntax are
unaffected.
https://www.djangoproject.com/weblog/2024/dec/04/security-releases/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Release notes:
https://lists.gnu.org/archive/html/bug-wget/2024-11/msg00002.html
Fixes the following vulnerabilities:
- CVE-2024-38428: url.c in GNU Wget through 1.24.5 mishandles semicolons in
the userinfo subcomponent of a URI, and thus there may be insecure
behavior in which data that was supposed to be in the userinfo
subcomponent is misinterpreted to be part of the host subcomponent.
https://nvd.nist.gov/vuln/detail/CVE-2024-38428
- CVE-2024-10524: Applications that use Wget to access a remote resource
using shorthand URLs and pass arbitrary user credentials in the URL are
vulnerable. In these cases attackers can enter crafted credentials which
will cause Wget to access an arbitrary host.
https://www.openwall.com/lists/oss-security/2024/11/18/6
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 295b2c4f8e)
[Peter: mark as security bump]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gh-122792: Changed IPv4-mapped ipaddress.IPv6Address to consistently use the
mapped IPv4 address value for deciding properties. Properties which have
their behavior fixed are is_multicast, is_reserved, is_link_local,
is_global, and is_unspecified.
https://github.com/python/cpython/issues/122792
CVE-2024-9287, gh-124651: Properly quote template strings in venv activation
scripts.
https://github.com/python/cpython/issues/124651
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go1.22.9 (released 2024-11-06) includes fixes to the linker.
go1.22.10 (released 2024-12-03) includes fixes to the runtime and the
syscall package.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The lmbench package (largely unmaintained upstream, last release in
2006) uses a home-grown build system. The scripts/build script sets
LDLIBS to -lm and Buildroot's makefile changes that to:
LDLIBS+=-lm
Except that when Buildroot passes LDLIBS="`$(PKG_CONFIG_HOST_BINARY)
--libs libtirpc`", the LDLIBS variable ends up being equal to:
-ltirpc-lm
Yes, without any space between -ltirpc and -lm.
Due to this, the checks in scripts/build that use ${LDLIBS} all fail,
and in particular the test that checks when socklen_t is a known type
fails, causing lmbench to provide its own definition, which clashes
with the C library headers definition, and therefore causing build
failures such as:
bench.h:81:13: error: conflicting types for 'socklen_t'; have 'int'
This commit fixes that by adjusting scripts/build using a patch to
properly allow passing additional ${LDLIBS} value, with the needed
space to separate the value from -lm.
Fixes:
http://autobuild.buildroot.net/results/f1715de95b46a1d08143e529bd4574bc7dbcfb3e/
We have been unable to determine exactly when this issue was
introduced. The first build failure we could find is the one
referenced above, which dates back from Aug 19, 2024. Since this date,
lmbench has been consistently failing on a very regular
basis. However, prior to Aug 19, 2024, the previous failure was from
December 2022, and was unrelated. It is unclear what changed in Aug
2024 to cause this issue to surface. The one thing that changed right
before commit ce3dedc2 (first failing commit) are changes to
genrandconfig, which ensures all autobuilders now generated fully
random configurations instead of configurations based on a
well-defined list of arch/toolchain configurations. But even with
this, this lmbench issue should have appeared earlier, and we have
been unable to find a scientific explanation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 80f25d4706)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The android-tools code base uses the __b64_pton() function, which
isn't provided by all C libraries. So the Debian patch
debian/patches/add_adbd.patch adds an implementation of b64_pton(),
but doesn't actually use it, nor defines a prototype for it. Our
existing patch 0003-Fix-build-issue-with-uclibc.patch switches the
code to use the b64_pton() function... but still without providing a
prototype, causing the following build failures with GCC >= 14.x:
adb_auth_client.c:75:15: error: implicit declaration of function 'b64_pton'
To fix this, we rework 0003-Fix-build-issue-with-uclibc.patch into a
patch that:
(1) Renames b64_pton() to adb_b64_pton() to make sure it won't clash
with implementations provided by some C libraries, and adjusts
the call sites accordingly.
(2) Adds a prototype definition of adb_b64_pton() in places where
this function is used.
Fixes:
http://autobuild.buildroot.net/results/b25b25337c7ad89c33f8bd20b646850bd993ec53ae9/
Even though GCC 14.x support was merged in Buildroot in May 2024, this
particular b64_pton() only started appearing on July 15 2024, with the
first occurrence being:
http://autobuild.buildroot.net/results/1cbe87bbe3c56f28444b3aaba1ba1d05f947d36e/
Indeed, it's not before July 15 2024 that we merged commit
d201f2f5cd ("package/android-tools: add
patches to fix build with GCC 14.x"), which fixed other GCC 14.x
issues, which were hiding this b64_pton() problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 1eec67d164)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The kernel headers on mips64 and powerpc64 were historically "broken",
defining u64 as an "unsigned long" instead of "unsigned long
long". This has been fixed in the upstream Linux kernel by introducing
the __SANE_USERSPACE_TYPES__ definition.
Our commit a2e178d6b4 ("android-tools:
disable on some architecture with old kernel headers") already
disabled building fastboot on powerpc64 and mips64 systems that have
too old kernel headers. However, it turns out that even with the new
kernel headers, there are build issues because
__SANE_USERSPACE_TYPES__ isn't defined everywhere it should be in the
android-tools code base. The Debian patche
debian/patches/ppc64el-ftbfs.patch adds some definitions, but it's
missing one file, and in another the definition comes too late.
This commit adds an extra patch that fixes this up, and makes fastboot
build properly on mips64 and powerpc64.
Fixes:
http://autobuild.buildroot.net/results/8528ff876e695f79bdfe64f5330d9d51eeef66cb/ (powerpc64)
http://autobuild.buildroot.net/results/36ac6af73b618c28d1636093da333f7ebd9d6cfe/ (mips64)
This issue has been occurring as far as Feb 2021, with the first
occurence apparently being:
http://autobuild.buildroot.net/results/d9521b4bfeafb1140c21745dbfe28d476a9b71ec/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit ee65a2119a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This will make it easier to modify the patch series moving forward. No
functional changes.
On one patch, we added the SoB from Giulio, which was missing. Giulio
was the original contributor of the patch, and nobody touched it since
it was introduced.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 3ee745782a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
losetup -f returns the next free loop device, which may not be
/dev/loop0. If you blindly follow the readmy you may end up destroying
an existing device.
Make it more robust with a variable to store the loop device.
Signed-off-by: Cherniaev Andrei <dungeonlords789@naver.com>
[Arnout: keep the actual losetup atomic]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 7dd56b6cd9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
nfs-utils configure script uses "systemd-escape" to determine the
rpc_pipefs mount point unit name in the non-default case.
If the host build system has no systemd this will silently result in an
empty name, causing rpc_pipefs.target to incorrectly depend on ".mount".
Fix that by depending on host-systemd for build.
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Acked-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 4c9b13b8dd)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As it happens, I am unable to keep maintaining those entries, and it is
misleading to others about whether they should Cc me on their changes.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 773a89d414)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When halting the boot process in u-boot, the 'usb start' command does not
automatically run. Since the SD card is connected over a USB to SD card
bridge on the kd240 and kr260 boards, the readme.txt instructions should
document that the 'usb start' command needs to be manually enterred when
following the reflashing instructions. Otherwise, the command to read the
boot.bin and u-boot.itb files from the SD card will fail.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit e02e59d124)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The mosquitto runtime test can randomly fail on slow
runners, see [1].
This commit improves this test in the following ways:
- the mosquitto_sub subscriber process is now started in a subshell
to suppress the job control messages (to prevent any spurious
messages when the job stops),
- the standard error is redirected to /dev/null, to prevent the
printing of any messages,
- the mosquitto_pub publisher process is started later, by increasing
the sleep time,
- finally, a new sleep time is introduced between the mosquitto_pub
publisher process and the check of the mosquitto_sub subscriber, to
make sure it will have time to write its output and exit.
Fixes: [1]
[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/8453386454
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 07a444d088)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Host bmap-tools runs using host-python3, but did not select it,
leading to the confusing situation that BR2_PACKAGE_HOST_PYTHON3=n
even though it was built and working.
Signed-off-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit dbb019db73)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 29409c9d34 ("package/systemd: fix
build with recent kernels") added a patch from upstream that adds the
BCACHEFS_SUPER_MAGIC definition if not provided by the kernel headers.
However, this commit from upstream was bogus: in the case
BCACHEFS_SUPER_MAGIC was defined, it does an assert_cc() to verify
that the value matches what we expect, but this assert_cc() statement
lacks the final semi-colon, causing build breakage on host systems
that do have BCACHEFS_SUPER_MAGIC defined in their kernel headers,
with a weird error occuring in another header file... because only the
next statement after assert_cc() was considered as having a syntax
error.
Fixes:
http://autobuild.buildroot.net/results/9f99a97df2efd5e4ae4ad5cc5882607f0c8766bc/
This issue only exists in 2024.02.x at this point, because in master
we have moved to systemd 256.x, which has dropped entirely this piece
of code related to defining BCACHEFS_SUPER_MAGIC (and we wonder how
systemd can then build with slightly older kernel headers, as
BCACHEFS_SUPER_MAGIC is only in the public kernel headers since Linux
6.10).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This test started failing at commit
0cad947b96
"support/testing/infra/emulator.py: fix qemu prompt detection" with the
error message
AttributeError: 'NoneType' object has no attribute 'run_command'
This is because we changed emulator.run() so that emulator.login() must
be called first. But this test skips the login and goes directly to a
shell. Use the new emulator.connect_shell() function which prepares the
shell without logging in.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 5ed1fab018)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The TestInitSystemNone bypasses the normal init and instead launches
directly into a shell. So it needs to bypass the login code and go
directly to a shell.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 95e1043013)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Asaf has privately requested to be removed from the DEVELOPERS file as
he will no longer be contributing to Buildroot in the forseeable
future.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 353a37b04d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The rootfs partition is the first partition, not the second one: the
Grub configuration file already contains root=/dev/sda1 by default,
and it should be changed to root=/dev/vda1 if Qemu emulation is used.
Signed-off-by: Cherniaev Andrei <dungeonlords789@naver.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 9e3d572ff5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The systemd service deployed to the target is derived from an example
hardcoded for the /usr/local/sbin/ path, but we install sshguard at
/usr/sbin/. Thus, by default we get this error message:
$ journalctl -b -u sshguard.service -f
systemd[1]: Started SSHGuard - blocks brute-force login attempts.
(sshguard)[612]: sshguard.service: Unable to locate executable '/usr/local/sbin/sshguard': No such file or directory
(sshguard)[612]: sshguard.service: Failed at step EXEC spawning /usr/local/sbin/sshguard: No such file or directory
systemd[1]: sshguard.service: Main process exited, code=exited, status=203/EXEC
systemd[1]: sshguard.service: Failed with result 'exit-code'.
systemd[1]: sshguard.service: Scheduled restart job, restart counter is at 5.
systemd[1]: sshguard.service: Start request repeated too quickly.
systemd[1]: sshguard.service: Failed with result 'exit-code'.
systemd[1]: Failed to start SSHGuard - blocks brute-force login attempts.
Fix up the path in the service after the $(INSTALL) command has run.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 750d0e377d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes a regression [1] introduced in ntpd 4.2.8p18 [2].
ntpd[200]: Listen normally on 3 lo [::1]:123
ntpd[200]: bind(20) AF_INET6 [fe80::bf3d:254d:dee0:d345%3]:123 flags 0x811 failed: Cannot assign requested address
ntpd[200]: unable to create socket on enp0s3 (4) for [fe80::bf3d:254d:dee0:d345%3]:123
ntpd[192]: daemon control: got EOF
ntpd[192]: daemon child died with signal 11
systemd[1]: ntpd.service: Control process exited, code=exited, status=70/SOFTWARE
systemd[1]: ntpd.service: Failed with result 'exit-code'.
systemd[1]: Failed to start Network Time Service.
If the IPv6 link-local interface was not ready for binding on the first
attempt, ntpd would segfault in update_interfaces(). The segfault would
only occur when ntpd was started as part of the boot sequence. Most
- but not all - boots were affected. Evidently it could happen that the
timing of ntpd's start up was delayed enough that the IPv6 link-local
interface was ready for the bind() call when it was first issued by
open_socket() via create_interface().
[1]: https://bugs.ntp.org/show_bug.cgi?id=3928
[2]: https://bugs.ntp.org/show_bug.cgi?id=3913
Signed-off-by: TIAN Yuanhao <tianyuanhao3@163.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 489e38fd2c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit
a39e0b95e1 ("package/qt6/qt6base: add
support for concurrent module"), we have an explicit option that
enables/disables concurrent support, so it no longer makes sense to
explicitly disable it unconditionally first.
Signed-off-by: Hannah Kiekens <hannah.kiekens@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 2de79d7065)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The homepage has moved, the previous one links to the new URL.
Signed-off-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
[yann.morin.1998@free.fr: split into its own patch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3ee7c891a0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When compiling jailhouse with BR2_PACKAGE_JAILHOUSE_HELPER_SCRIPTS=y,
build is failing with error:
Traceback (most recent call last):
File "/buildroot/output/build/jailhouse-e57d1eff6d55aeed5f977fe4e2acfb6ccbdd7560/setup.py", line 18, in <module>
setup(name="pyjailhouse", version=version,
File "/buildroot/output/host/lib/python3.12/site-packages/setuptools/__init__.py", line 108, in setup
return distutils.core.setup(**attrs)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...
File "/buildroot/output/host/lib/python3.12/sysconfig.py", line 549, in _init_posix
_temp = __import__(name, globals(), locals(), ['build_time_vars'], 0)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
ValueError: Empty module name
This is due to a missing dependency on the target python3 package.
Jailhouse Python scripts are using setuptools with host-python3 which
reads its sysconfig data from the target-python3. See:
https://gitlab.com/buildroot.org/buildroot/-/blob/2024.08.1/package/pkg-python.mk?ref_type=tags#L33
If the target python3 is not installed, this get expanded as an empty
string, leading to this "ValueError: Empty module name" error.
Pure Python packages which are using the python-package infrastructure
usually get this dependency automatically from:
https://gitlab.com/buildroot.org/buildroot/-/blob/2024.08.1/package/pkg-python.mk?ref_type=tags#L295
Here, the jailhouse package rather uses the generic-package
infrastructure, then installs the Python scripts (if enabled) with
dedicated macros. This is why the target python3 is needed.
This commit fixes the issue by adding this missing dependency.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c808e271e3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
0001-nano.patch: both MOD_NANO and MOD_TAI were added to glibc 2.12
on 2011-03-30 in commit 83fe108b0a9bc4f2deb14695bb0c8b2011e79f28.
They were added to musl 0.7.5 in commit f5ba2bc9c on 2011-03-18. And
they were added to uClibc 1.0.23 in commit 2d8ea0524b on 2017-03-17. We
consider all of these old enough to assume they always exist.
Renumber the remaining patches.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit eee73d0cc0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix pthread_detach() detection that is broken when building
with GCC 14.x:
checking for pthread_kill... yes
checking for pthread_rwlock_destroy with <pthread.h>... yes
checking for pthread_detach with <pthread.h>... no
configure: error: could not locate pthread_detach()
make[1]: *** [package/pkg-generic.mk:273:
/home/user/buildroot/bsp-barebox/build/ntp-4.2.8p17/.stamp_configured]
Error 1
make: *** [Makefile:82: _all] Error 2
Reference: https://bugs.ntp.org/show_bug.cgi?id=3926
Additionally, refresh patch 0002 to fix the offset of hunk 1.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 40d0797027)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is bugfix release of stable libmdbx branch.
The most significant fixes since v0.12.10 (the previous version pinned to
buildroot):
- Fixed the possibility of `SIGSEGV` inside the `coherence_check()` after
changing the geometry by another process with an increase in the upper
DB size above the previous in-process limit.
- Fixed cursor(s) handling opened in parent transactions and closed before
the completion of nested/child transactions. In such case, closed
cursors were "resurrected", which led to a leak of memory allocated for
such cursors.
- Fixed a possibility of `SIGSEGV` when enabling logging of the
`MDBX_LOG_TRACE` level in debug builds.
- Correction of the missing `TXN_END_EOTDONE` in the case the start of
a reading transaction fails. The mentioned bit-flag was missing in the
transaction destruction/shutdown path on error its launch. Because of
this, an attempt was made to destroy the cursors, which led to crash
debug builds, since the corresponding array is intentionally filled
with poison pointers.
- Modification of `mdbx_close_by()` to return an error when trying to
close the dbi descriptor of a table created and/or modified in a
still-running transaction. Such premature closure of the descriptor is
an incorrect use of the API and a violation of the contract/preconditions
formulated in the description of `mdbx_close_dbi()`.
However, instead of returning an error, an incorrect closure of the
descriptor was performed, which could lead to the creation of a table
with an empty name, leakage of database pages and/or corruption of a
b-tree structure (wrong reference to the root of a table).
The complete ChangeLog:
https://gitflic.ru/project/erthink/libmdbx/blob?file=ChangeLog.md
Signed-off-by: Леонид Юрьев (Leonid Yuriev) <leo@yuriev.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 81e7806b93)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
in e97fc89e7b a dependency on host-gcc >= 7 was added but
for the comment the condition was not correctly inverted.
Fixes: e97fc89e7b ("package/protobuf-c: bump to version 1.5.0")
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 84ef9bede6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y,
BR2_LINUX_KERNEL_IMAGE_TARGET_NAME is supposed to be non-empty. But in
the context of genraconfig, we don't know to what value
BR2_LINUX_KERNEL_IMAGE_TARGET_NAME can be set, so let's avoid cases
where BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y. By dropping this option,
kconfig will revert back to the default image format for the selected
architecture.
Fixes:
http://autobuild.buildroot.net/results/1d104a051c83bb31e98565369a2ec7badfa21eca/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b07d21ab98)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Generating Bitcoins to an address can take longer than the current
timeout, on slow runners. This commit fixes this issue by increasing
the timeout on specific commands. This issue was also observed more
frequently on newer bitcoin-core version 28.0.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7782083081
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 859c4ea5f7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit: https://git.postgresql.org/gitweb/?p=postgresql.git;a=commit;h=52afe563206e753f4c45c014fee2459ad0855826
postgrsql fails to build with toolchains without threads support:
misc.c: In function 'ecpg_gettext':
misc.c:541:51: error: 'PTHREAD_MUTEX_INITIALIZER' undeclared (first use in this function)
541 | static pthread_mutex_t binddomain_mutex = PTHREAD_MUTEX_INITIALIZER;
| ^~~~~~~~~~~~~~~~~~~~~~~~~
misc.c:541:51: note: each undeclared identifier is reported only once for each function it appears in
misc.c:552:24: warning: implicit declaration of function 'pthread_mutex_lock' [-Wimplicit-function-declaration]
552 | (void) pthread_mutex_lock(&binddomain_mutex);
| ^~~~~~~~~~~~~~~~~~
misc.c:569:24: warning: implicit declaration of function 'pthread_mutex_unlock' [-Wimplicit-function-declaration]
569 | (void) pthread_mutex_unlock(&binddomain_mutex);
| ^~~~~~~~~~~~~~~~~~~~
Option "--disable-thread-safety" will be dropped in PG 17, so
this patch is needed only for 16.x branch.
Fixes: 73dd1d6b96 ("package/postgresql: security bump version to 16.3")
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 747a41c19c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The package homepage http url redirects to https. This commit updates
this url to directly use https.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 5440d6c446)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The package _SITE url only contains the latest version at a given point
in time. When a new version is published, it is replacing the old one.
This issue was not detected because the archive was downloaded from the
sources.buildroot.org backup mirror, when the primary source became
unavailable.
Since commit 559bb33ae "support/testing: do not use s.b.o" [1], the
runtime test infrastructure is disabling this backup mirror. This
makes the nmap runtime test failing [2], which is using liblinear as
a dependency.
The liblinear package author confirmed in a private email that all the
releases, including the latest version, are all kept in the "oldfiles"
directory.
This commit fixes this download issue by updating the _SITE url to that
location. While at it, this commit also change the url to use https
(since the http equivalent redirects to https).
Fixes:
- [2]
[1] https://gitlab.com/buildroot.org/buildroot/-/commit/559bb33ae71dd2358ca2314ccb24b56cc3809fc1
[2] https://gitlab.com/buildroot.org/buildroot/-/jobs/7948008007
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 8b18c67f26)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This fixes the following runtime error when importing PyQt5 in python:
from PyQt5.QtCore import *
ModuleNotFoundError: No module named 'PyQt5.sip'
The problem was likely triggered by the atomic upgrade from 5.7 to
5.15 in b36ce7e. This commit is part of the 2022-2024 LTS.
Signed-off-by: Ralf Dragon <hypnotoad@lindra.de>
Tested-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit ba09a448f1)
[Peter: reword commit summary]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Version environment variable VERSION=$(VERSION) is set in the top level
Makefile of the sysvinit:
$(MAKE) VERSION=$(VERSION) -C src $@
Build command SYSVINIT_BUILD_CMDS doesn't use the top level Makefile, but
src/Makefile instead without setting the VERSION variable, which leads to
undefined VERSION macro in src/init.c.
Add VERSION=$(SYSVINIT_VERSION) to SYSVINIT_MAKE_OPTS to make the VERSION
environment variable available in the src/Makefile.
Signed-off-by: Cody Green <cody@londelec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 954098b142)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The check-package tool requires some PyPi package to be installed before
it can run. This is typically done by manually installing them into the
user's global Python environment or setting up a virtual environment,
then manually installing each dependency.
Python recently defined a format for managing script dependencies as
inline metadata[1]. This can be used with the `uv` tool to run a Python
script and automatically install the minimum required version of Python
and PyPi dependencies.
With this change, it's now possible to run check-package with
uv run -s ./utils/check-package
Note that, because check-package does not have the '.py' file extension
we must specify the `-s` or `--script` argument. That argument was added
very recently in release 0.4.19[2].
I set the minimum python to 3.9 as that is the oldest version still
supported[3]. I verified 3.9 works by running
uv run -p 3.9 -s ./utils/check-package `git ls-tree -r --name-only HEAD` --ignore-list=.checkpackageignore
[1] https://packaging.python.org/en/latest/specifications/inline-script-metadata/#script-type
[2] https://github.com/astral-sh/uv/releases/tag/0.4.19
[3] https://devguide.python.org/versions/
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 6ffcdb52e8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Call out the requirements to run check-package and mention that Docker
can be used to run check-package without installing dependencies.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 68de69c4d7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When compiling jailhouse with BR2_PACKAGE_JAILHOUSE_HELPER_SCRIPTS=y,
installation is failing with error:
/bin/sh: -c: line 1: syntax error near unexpected token ')'
This error is due to an extra ')' character in the macro
JAILHOUSE_INSTALL_HELPER_SCRIPTS.
This commit fixes this typo.
Signed-off-by: Raimundo Sagarzazu <rai.sagarzazu@outlook.com>
[Julien: reworded the commit log]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 10d25d98ed)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I still follow Buildroot development and use it for some personal
projects, but no longer have the time to be an active contributor.
Some of these are important defconfigs and packages to have up-to-date
in Buildroot, and mostly other developers have been doing that work, so
I am dropping them so that someone from the active contributors can be
the maintainer contact for them.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 1dc370cc90)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This vulnerability only affects libcurl deployments in Nest products
because of incorrect use.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 7e739d49b2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When I initially made the CVE cells collapsible, I neglected to
count the unsure CVEs. This patch adds unsure CVEs to the cell collapsing
calcualation to ensure that cells with lots of unsure CVEs actually get collapsed.
This patch also removes the "+ 1" from the cve_total calculation,
which fixes the cve_total being off-by-one.
I'm not sure *why* I did that in the first place.
demo:
https://sen-h.codeberg.page/pkg-stats-demos/@pages/add-unsure_cves-to-cve_total-calc.html
Signed-off-by: Sen Hastings <sen@hastings.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 87b8428c40)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Security fixes:
- gzip: prevent a hang when processing a malformed gzip inside a gzip
(#2366, OSS-Fuzz)
- tar: don't crash on truncated tar archives (#2364, OSS-Fuzz)
- tar: fix two leaks in tar header parsing (#2377)
Important bugfixes:
- 7-zip: read/write symlink paths as UTF-8 (#2252)
- cpio: exit with an error code if an entry could not be extracted (#2371)
- rar5: report encrypted entries (#2096)
- tar: fix truncation of entry pathnames in specific archives (#2360)
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 55d0c9a9a6)
[Peter: mark as security bump]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The denx.de/wiki/U-Boot link now redirects to docs.u-boot.org/en/latest
Replace the link to the new location for the U-Boot documentation
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 164d9f0546)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a test that runs the dtc commandline tools. To test devicetree
compilation, we use an example devicetree from the dtc project. The
example source is GPL-2.0+ licensed.
Signed-off-by: Brandon Maier <brandon.maier@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 9b69034160)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
linux-pam 1.2.0 removed the use of yywrap, so the flex dependency is not
needed now (host-flex is still needed).
Fixes: #47
Signed-off-by: Damien Thébault <damien.thebault@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 600e273487)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
3.7.5 fixed a number of security issues:
fix multiple vulnerabilities identified by SAST (#2251, #2256)
cpio: ignore out-of-range gid/uid/size/ino and harden AFIO parsing (#2258)
lzop: prevent integer overflow (#2174)
rar4: protect copy_from_lzss_window_to_unp() (#2172, CVE-2024-20696)
rar4: fix CVE-2024-26256 (#2269, CVS-2024-26256)
rar4: fix OOB in delta and audio filter (#2148, #2149)
rar4: fix out of boundary access with large files (#2179)
rar4: add boundary checks to rgb filter (#2210)
rar4: fix OOB access with unicode filenames (#2203)
rar5: clear 'data ready' cache on window buffer reallocs (#2265)
rpm: calculate huge header sizes correctly (#2158)
unzip: unify EOF handling (#2175)
util: fix out of boundary access in mktemp functions (#2160)
uu: stop processing if lines are too long (#2168)
And 3.7.6 fixed a tar regression introduced in 3.7.5
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ab3c84e5e2)
[Peter: mark as security bump]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Doctoring a defconfig is tedious, and it is not easy to update a
defconfig, as it requires manual copy-pasting, adding comments and so
on...
Instead, just require defconfigs to be generated with 'savedefconfig'.
Any details can/must be provided in the commit log.
Reported-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 17bdd10cb3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Release notes: https://www.python.org/downloads/release/python-31110/
Fixes CVE-2024-4032, CVE-2024-6232, CVE-2024-6923, CVE-2024-7592,
CVE-2024-8088 and CVE-2023-27043.
The fixes for bundled libexpat are irrelevant for us because external expat
is used.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This version fixes an out-of-bound reads in the MLSD command, so upgrading is recommended.
It also improves compatibility with various systems.
Update the COPYING hash because of a change in copyright year
Signed-off-by: Michael Fischer <mf@go-sys.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 5271e90a6a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also add a missing article one line above.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Arnout: fix additional typo]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 4390361bb5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream curl commit f057de5a1a950 ("libcurl.pc: add `Requires.private`,
`Requires` for static linking") deals with proper pkg-config
configuration since version 8.9.0.
Our local libcurl.pc modification we added back in commit 61d322c3d2
(package/cURL: fix static link whith openSSL) is no longer needed.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[yann.morin.1998@free.fr: this is not a "revert", reword commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit a5cef5339b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 89d39fc7a3 "initscripts: new package" moved the inittab
packaged for Busybox init from system/skeleton/etc to package/busybox.
The manual, however, still points to the old location, so let's fix it.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 99b1685fd8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr: s/contents/content/]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit aa79ae24a8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit a87abcf6da (Makefile: run PPD and RPATH fixup in host-fialize)
(sic) moved the fixups peviously done in prepare-sdk, to host-finalize.
This exposed a bug in fix-rpath, when RPATH contains multiple entries,
like: /PPD/host-foo/host/lib:/PPD/host-foo/host/lib/foo
In that situation, we want to get rid of /PPD/host-foo and replace it
with the finale HOST_DIR, so we mangle the RPATH with a sed expression.
However, that sed expression only ever replaces the first match, as it
is missing the 'g' option. Thus, the second (and following) parts of
RPATH are still referring to the PPD, and thus patchelf does not find it
relative to the final HOST_DIR, amd rops it. This eventually lead to a
final RPATH set as $ORIGIN/../lib instead of the expected
$ORIGIN/../lib:$ORIGIN/../lib/foo
This is the case for host-systemd, which installs some of its libraries
in $PREFIX/lib/systemd/ and adds an RPATH set appropriately to
/PPD/host-systemd/host/lib:/PPD/host-systemd/host/lib/systemd and that
gets incorrectly mangled.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/issues/39
Also fix a typo in the comment just above.
Reported-by: José Luis Salvador Rufo @jlsalvador
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Reviewed-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Tested-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Reviewed-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 2100a76d9e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Browsers nowadays complain about HTTP downloads (E.G. manual.pdf) from a
site served over HTTPS, so also use HTTPS for the nightly.buildroot.org
manual links.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 06397d26a0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The behaviour of asciidoc on my laptop (Debian 10.2.0-1) changed at the end
of last year, causing the BR2_VERSION logic to no longer work:
grep 'manual generated' buildroot-2023.02.*/docs/manual/manual.text
buildroot-2023.02.6/docs/manual/manual.text:Buildroot 2023.02.6 manual generated on 2023-10-16 08:41:26 UTC from
buildroot-2023.02.7/docs/manual/manual.text:Buildroot ${BR2_VERSION%%-git*} manual generated on 2023-11-14
buildroot-2023.02.8/docs/manual/manual.text:Buildroot ${BR2_VERSION%%-git*} manual generated on 2023-12-04
We don't really NEED to strip the -git suffix; indeed, for a git tag, there
would be not -git suffix, while for any other commit there will be one
and we want to see it (e.g. in the nightly manual, or on a development
branch locally).
So just drop that to unbreak the version output.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr: explain why wew don't want to drop it]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit ec270a0815)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The qemu.run() method can break when a command happens to output the
string "# " to stdout. This is because qemu.run() detects when a command
has completed by searching for the shell prompt, which by default is
"# ". It then captures everything before the "# " as the commands
output, causing the rest of output to be lost.
Instead use the pexpect libraries REPLWrapper to handle running
commands. It has hooks to set a custom prompt and avoid some other
pitfalls of wrapping a shell.
We unfortunately can't reuse replwrap._repl_sh directly, because it
tries to spawn a command while we already have a qemu started. So we
need to copy that code into _repl_sh_child. While we're at it, also
define our own prompt strings.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
[Arnout:
- Make all arguments to _repl_sh_spawn non-optional.
- Move non_printable_insert to a local variable instead of an argument,
we don't need to override it.
- Copy the comment from _repl_sh that explains why non_printable_insert
is needed.
- Add a comment about timeouts.
- Rename spawn to child (we don't actually spawn anything so this felt
more natural, even though the class
- Use single quotes instead of triple quotes, and explicitly escape the
nested quotes.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 0cad947b96)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the build host does not have a Python interpreter installed,
host-grub2 is failing to configure due to this missing interpreter.
Note that host-grub2 is the first package to fail because it is a
dependency of grub2. The grub2 target package has the same dependency
requirement.
The issue can be quickly reproduced on a host without Python with the
commands:
cat <<EOF >.config
BR2_aarch64=y
BR2_TARGET_GRUB2=y
BR2_TOOLCHAIN_EXTERNAL=y
EOF
make olddefconfig
make grub2
grub2 autotools configure.ac search for a Python interpreter since
upstream commit [1] 8b467844e "python: Use AM_PATH_PYTHON to determine
interpreter for gentpl.py", first included in grub v2.04 released
on 2019-07-04. For reference, grub2 has been updated to that version
in commit [2] ea7ec41c "boot/grub2: bump to verson 2.04".
This commit fixes the issue by adding the host-python3 dependency to
host-grub2 and grub2.
Fixes:
checking for a Python interpreter with version >= 2.6... none
configure: error: no suitable Python interpreter found
[1] https://git.savannah.gnu.org/gitweb/?p=grub.git;a=commitdiff;h=8b467844e11170077c8ca727c39d2bd36eeb5f08
[2] https://gitlab.com/buildroot.org/buildroot/-/commit/ea7ec41cf64e86a692ac45e0d012c6e8199ef110
Reported-by: Vincent Stehlé <vincent.stehle@arm.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 86bb1b2360)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Samuel Martin has not been around in the Buildroot community for many,
many years. His last posting on the mailing list was on July 2018. So
let's not pretend those packages are actually maintained, and let's
stop spamming Samuel with lots of patches and autobuilder failures.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit d8b83b861c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following CVEs:
CVE-2024-24789: archive/zip: mishandling of corrupt central directory record
CVE-2024-24790: net/netip: unexpected behavior from Is methods for IPv4-mapped IPv6 addresses
View the release notes for more information:
https://go.dev/doc/devel/release#go1.22.4
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit d6e0f1b622)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a third bootstrap stage with Go1.21.x necessary for go1.22 bootstrap.
go-bootstrap-stage1 is Go1.4.x, the final version to support bootstrap using a C
compiler (later versions require the Go compiler for bootstrapping).
See: https://go.dev/doc/install/source#bootstrapFromSource
go-bootstrap-stage2 is Go 1.19.13, the last version to support bootstrap using
the Go1.4.x compiler.
go-bootstrap-stage3 is Go 1.21.8, the last version to support bootstrap using
the Go1.19.13 compiler. Go 1.20 requires a minimum of go 1.17.13 to bootstrap.
See: https://go.dev/doc/go1.20#bootstrap
This patch is in preparation for bumping the host-go package to >go1.22.x, which
requires a minimum of Go1.20.x for bootstrap.
See: https://go.dev/doc/go1.22#bootstrap
Signed-off-by: Christian Stewart <christian@aperture.us>
[Arnout: add GOCACHE definition]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit f00eb37de9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rewrap the whole help text as with the typo fix the line is a bit
longer and no longer fits within the limits defined by our
check-package coding style checking.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 08926081d8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
WirePlumber is a PipeWire session manager, essential to the operation
of PipeWire in most use cases. It is not a graphical application,
nor does it support graphics in any way. It is only there to support
PipeWire and it should be kept together with PipeWire in the menus.
Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 14b1b8ca8d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The two lines with the Buildroot version and the system os-release
details are rendered on a single line, "because Markdown".
Make that a two-item list, to be sure they are on properly rendered.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 6a1e297a31)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr: also fix grammar]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit e009783505)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the gdbinit is generated and installed during post install
hooks, either from the gdb package, or from the external-toolchain
package. When using per-package directories (PPD), the staging directory
of the either package is stored in the generated gdbinit, which is not
going to be valid when all the PPD staging dirs get merged into the
final staging: it would lack any library installed afterwards, i.e.
mostly everything would be missing (but the libraries from the C
toolchain in the case of an external toolchain).
Similarly, all the RPATH will point to various PPD drectories. This
does not cause any issue when the final host is aggregated, because the
PPD directories still exist when we call programs from there (e.g. from
the fs infra, or from post-image scripts).
However, we knew that would not always be possible to keep the PPD
directories: we have the prepare-sdk rule that runs a cleanup pass on
the RPATH, and also applies the generic PPD fixups.
When we introduced prepare-sdk in c32ad51cbf (core/sdk: generate the
SDK tarball ourselves), we did not yet have support for PPD for the host
directory, and especially, we did not have the host-finalize rule, which
was only introduced in d0f4f95e39 (Makefile: rework main directory
creation logic) which kick-started the introduction of PPD.
At that point, we did not realise that the rpath fixups from
prepare-sdk, would be better moved to the new host-finalize rule,
because that had no impact unless one would need an SDK.
Later, in 25e60fbe1c (Makefile: fix SDK relocation for
per-package-dirs), we eventually introduced the PPD generic fixups in
the prepare-sdk rule. Again, we did not realise that those fixups would
be better placed in the host-finalize rule rather than the prepare-sdk.
While fixing the RPATH in host-finalize is not critical, fixing up the
PPD paths actually is, as the gdbinit case demonstrate.
As such, move the PPD fixups to the host-finalize step, and while at it,
also move the RPATH fixups.
This now does not leave much to do in the prepare-sdk step, and that
could very well be moved to the host-finalize rule as well. However,
some people may have started to rely on prepare-sdk in its 6 years of
existence, and the little script it installs is not needed unless one
really needs an SDK. So leave it as it is for now.
Reported-by: Casey Reeves <casey@xogium.me>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Casey Reeves <casey@xogium.me>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Brandon Maier <Brandon.Maier@collins.com>
Tested-by: Brandon Maier <brandon.maier@collins.com>
Acked-by: TIAN Yuanhao <tianyuanhao3@163.com>
(cherry picked from commit a87abcf6da)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following an email exchange with Conrad Sand, one of the maintainers of
the project, I learned that version 9.900.2 has been moved to
https://sourceforge.net/projects/arma/files/retired/.
This patch fixes the package download error, waiting for a subsequent
patch that will restore the previous URL to bump to a more recent
version.
Adding the .RETIRED suffix to the downloaded tarball generated the
following error:
armadillo-9.900.2.tar.xz.RETIRED: OK (sha256: d78658c9442addf7f718eb05881150ee3ec25604d06dd3af4942422b3ce26d05)
>>> armadillo 9.900.2 Extracting
buildroot/dl/armadillo/armadillo-9.900.2.tar.xz.RETIRED | buildroot/output/host/bin/tar --strip-components=1 -C buildroot/output/build/armadillo-9.900.2 -xf -
/bin/bash: line 1: buildroot/dl/armadillo/armadillo-9.900.2.tar.xz.RETIRED: Permission denied
buildroot/output/host/bin/tar: This does not look like a tar archive
buildroot/output/host/bin/tar: Exiting with failure status due to previous errors
make[1]: *** [package/pkg-generic.mk:213: buildroot/output/build/armadillo-9.900.2/.stamp_extracted] Error 2
which required the addition of ARMADILLO_EXTRACT_CMDS to be fixed.
Finally, it was also necessary to modify the tarball's hash.
Fixes:
- http://autobuild.buildroot.org/results/d4e9e7b453960a4f62a199344b30b729a4f235bc
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit f69fe48404)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patch v1 not set to 'superseded' when replying to <message-id> with v2.
I'm using git version 2.46.0. The manual says the following is the
correct way to use the '--in-reply-to' option:
git send-email --in-reply-to=<message-id>
Signed-off-by: Roy Kollen Svendsen <roykollensvendsen@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 6677d9c4e1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Replace the group name 'nogroup' with 'nobody' in the default ProFTPD
configuration file. This fixes the following error when starting the
server:
proftpd[110]: fatal: Group: Unknown group 'nogroup' on line 30 of '/etc/proftpd.conf'
Fixes: 0d887cc2b4 ("system: replace nogroup with nobody")
Signed-off-by: Mattia Narducci <mattianarducci1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 2383768cdf)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2024-31080: Heap buffer overread/data leakage in ProcXIGetSelectedEvents
- CVE-2024-31081: Heap buffer overread/data leakage in ProcXIPassiveGrabDevice
- CVE-2024-31082: Heap buffer overread/data leakage in ProcAppleDRICreatePixmap
- CVE-2024-31083: User-after-free in ProcRenderAddGlyphs
For more details, see thee security page of Xorg:
https://www.x.org/wiki/Development/Security/
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Peter: add actual list of CVEs]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit e33db30aab)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I lack the time (and interest) to properly keep these entries up to
date, so drop them from my section.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 6fdbab87a2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The following build failure on xtensa:
Waf: Entering directory `/home/buildroot/instance-0/output-1/build/ntpsec-1.2.3/build/host'
[1/2] Processing ntpd/ntp_parser.y
[2/2] Compiling build/host/ntpd/ntp_parser.tab.c
gcc: error: unrecognized command-line option '-mlongcalls'
gcc: error: unrecognized command-line option '-mauto-litpools'
reveals that the target's CFLAGS are being used for host compilation.
The patch fixes the host compilation by correctly setting the CFLAGS to
be used.
It should be noted that the build script used by ntpsec applies CFLAGS
for host compilation and --cross-cflags for target compilation.
Fixes:
- http://autobuild.buildroot.org/results/9321a637f2c340ce8dcb24249676bb6c44d0dfc6
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 064e4c09fa)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable RNG support so that following build failure does not happen:
In file included from ../../../../src/libstrongswan/plugins/plugin.h:28,
from wolfssl_plugin.h:34,
from wolfssl_plugin.c:29:
wolfssl_plugin.c: In function 'get_features':
../../../../src/libstrongswan/plugins/plugin_feature.h:321:119: error: 'FEATURE_WC_RNG' undeclared (first use in this function); did you mean 'FEATURE_RNG'?
321 | #define __PLUGIN_FEATURE_REGISTER(type, _f) (plugin_feature_t){ FEATURE_REGISTER, FEATURE_##type, .arg.reg.f = _f }
| ^~~~~~~~
../../../../src/libstrongswan/plugins/plugin_feature.h:332:73: note: in expansion of macro '__PLUGIN_FEATURE_REGISTER'
332 | #define _PLUGIN_FEATURE_REGISTER_RNG(type, f) __PLUGIN_FEATURE_REGISTER(type, f)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
../../../../src/libstrongswan/plugins/plugin_feature.h:248:39: note: in expansion of macro '_PLUGIN_FEATURE_REGISTER_RNG'
248 | #define PLUGIN_REGISTER(type, f, ...) _PLUGIN_FEATURE_REGISTER_##type(type, f, ##__VA_ARGS__)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
wolfssl_plugin.c:510:17: note: in expansion of macro 'PLUGIN_REGISTER'
510 | PLUGIN_REGISTER(RNG, wolfssl_rng_create),
| ^~~~~~~~~~~~~~~
../../../../src/libstrongswan/plugins/plugin_feature.h:321:119: note: each undeclared identifier is reported only once for each function it appears in
321 | #define __PLUGIN_FEATURE_REGISTER(type, _f) (plugin_feature_t){ FEATURE_REGISTER, FEATURE_##type, .arg.reg.f = _f }
| ^~~~~~~~
../../../../src/libstrongswan/plugins/plugin_feature.h:332:73: note: in expansion of macro '__PLUGIN_FEATURE_REGISTER'
332 | #define _PLUGIN_FEATURE_REGISTER_RNG(type, f) __PLUGIN_FEATURE_REGISTER(type, f)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
../../../../src/libstrongswan/plugins/plugin_feature.h:248:39: note: in expansion of macro '_PLUGIN_FEATURE_REGISTER_RNG'
248 | #define PLUGIN_REGISTER(type, f, ...) _PLUGIN_FEATURE_REGISTER_##type(type, f, ##__VA_ARGS__)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
wolfssl_plugin.c:510:17: note: in expansion of macro 'PLUGIN_REGISTER'
510 | PLUGIN_REGISTER(RNG, wolfssl_rng_create),
| ^~~~~~~~~~~~~~~
make[6]: *** [Makefile:659: wolfssl_plugin.lo] Error 1
Reported Upstream:
https://github.com/strongswan/strongswan/issues/2410
This build failure started since 5.9.11 update in commit
78959665b9.
Fixes:
http://autobuild.buildroot.net/results/278b3f74c48c858ae368d59069752adb69c05246
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 89d512729c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 8f88a644ed "support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0" reduced the fuzz factor.
Due to this change, asterisk fails to build with output:
Applying 0004-install-samples-need-the-data-files.patch using patch:
patching file Makefile
Hunk #1 FAILED at 779.
1 out of 1 hunk FAILED -- saving rejects to file Makefile.rej
This commit rebase the package patches on the current package version.
Note: the patch 0005 is unchanged, as it is correct in its current
state.
Fixes:
- http://autobuild.buildroot.org/results/92d/92d58ecb67f11a6eb74695bc1efcc672f69a57a9
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit a6fabd9610)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 2f260084d5 (utils/genrandconfig: remove support for toolchain
CSV) kept the --no-toolchains-csv option, but in the rework forgot to
keep it as a bool, while argparse default is to expect a string.
Rather than re-introduce the action="store_true" which implies the
argument is a bool, explicit make it a bool.
Fixes: 2f260084d5
Reported-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 4dbb87bb66)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Right now, genrandconfig just spits out the random messages from the
different make invocations, which isn't terribly useful. Instead,
let's redirect the output of make invocations to oblivion, and add
some more high level logging.
As part of this logging, we're interested to see how many iterations
were needed to find a valid configuration, so changed the loop logic
to count from 0 to 100 instead of from 100 to 0 so that we can easily
show the iteration number.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit ce3dedc26b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to test that upstream sites are still working, we need to NOT
fallback to sources.buildroot.net for some builds.
As there is anyway a local cache in the autobuilder instances, we need
to do quite a lot of builds without any BR2_BACKUP_SITE configured to
have a chance to catch issues, which is why a 50% chance is used to
unset BR2_BACKUP_SITE.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit da5c25c9f9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Before calling randpackageconfig/randconfig, we were pre-generating a
snippet of .config with:
(1) minimal.config
(2) BR2_CURL/BR2_WGET settings
(3) some random selection of init system, debug, runtime debug, etc
(4) enabling BR2_REPRODUCIBLE=y when diffoscope was found
Now that we only use randconfig, this whole fine-tuning is completely
irrelevant, as it gets overridden by "make randconfig".
(1) and (3) above are useless, as randconfig does all the
randomization that is needed.
However, we want to preserve (2) and (4) above, so we re-implement
those fixups, but *after* randconfig has done its job.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 3d33d394c2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the support for generating a fully random configuration has
been well-tested, the whole mechanism based on a toolchain CSV isn't
really useful anymore, so let's drop it to simplify the logic.
Note that the autobuilder code still uses --{,no-}toolchains-csv, so we
can't remove those or the autobuilders would fail. Once all supported
branches no longer use those argumetns, we can drop them from the
autobuilder code, then ask people to update their runners, and we will
finally be able to drop those arguments. Eventually.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: keep --{,no-}toolchains-csv and explain why]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 2f260084d5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We have accumulated a whole bunch of very old fixups to avoid issues
with super old CT-NG toolchains, which we are not testing anymore, so
remove those fixups.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 9e33882568)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The LICENSE file gets installed directly to the root of $(TARGET_DIR),
which clashes with other packages:
FileExistsError: File already exists: /home/autobuild/autobuild/instance-3/output-1/target/LICENSE
This commit fixes this issue for the python-unittest-xml-reporting
package. Other fixes will be needed for the other patches.
The issue in python-unittest-xml-reporting was introduced in upstream
commit c43427611390fba83ca13fbb5311bd8fece5048f, which first appeared
in v3.1.0. We switched from a pre-3.1.0 version to 3.2.0 in Buildroot
in commit 69ba1562d5, which was merged
in 2023.02.
Fixes:
http://autobuild.buildroot.net/results/2c91243b440087bbc7d051d65f553f59d05dd207/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 182d3556a6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The python-huepy has an incorrect data_files statement in its
setup.py, causing the LICENSE file to be installed directly as
$(TARGET_DIR)/LICENSE. This was detected because several packages were
doing this, and the second package doing
it (python-unittest-xml-reporting, fixed separately) was erroring out
when trying to overwrite this already existing file.
This commit fixes the case of python-huepy by adding a patch that has
been submitted upstream.
There are no autobuilder failures related to python-huepy, but this
was detected while fixing
http://autobuild.buildroot.net/results/2c91243b440087bbc7d051d65f553f59d05dd207/
for python-unittest-xml-reporting.
This bug has been in huepy since at least 2018, so this patch can be
backported to previous Buildroot versions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 4e78b2c8b1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
lib/print.c in gnu-efi contains some floating point computation. On
ARM soft-float configurations, these floating point operations
generate calls to __eabi_*() functions that are provided by
gcc. However, gnu-efi builds some freestanding code, so it doesn't
link with libgcc, and therefore the build fails with:
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1431:(.text+0x78c): undefined reference to `__aeabi_i2d'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1431:(.text+0x7a0): undefined reference to `__aeabi_dsub'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1431:(.text+0x7a4): undefined reference to `__aeabi_d2f'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1432:(.text+0x7b4): undefined reference to `__aeabi_fcmplt'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1438:(.text+0x7c8): undefined reference to `__aeabi_fmul'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1440:(.text+0x7d4): undefined reference to `__aeabi_fcmpeq'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1444:(.text+0x7f8): undefined reference to `__aeabi_fmul'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1440:(.text+0x808): undefined reference to `__aeabi_fcmpeq'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1440:(.text+0x818): undefined reference to `__aeabi_f2iz'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1451:(.text+0x834): undefined reference to `__aeabi_i2f'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1451:(.text+0x840): undefined reference to `__aeabi_fcmpeq'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1453:(.text+0x858): undefined reference to `__aeabi_fmul'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1451:(.text+0x860): undefined reference to `__aeabi_f2iz'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1451:(.text+0x868): undefined reference to `__aeabi_i2f'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1451:(.text+0x870): undefined reference to `__aeabi_fcmpeq'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1451:(.text+0x89c): undefined reference to `__aeabi_f2iz'
Since we don't care about gnu-efi support on ARM soft-float
configurations, let's disable such configurations.
Note that we have chosen to use BR2_ARM_SOFT_FLOAT as we're for now
making this specific to ARM as we're not sure what is the situation on
other CPU architectures (for example RISC-V without FPU maybe). This
can be revisited once we get more data on the behavior on other CPU
architectures that can support soft-float.
Fixes:
http://autobuild.buildroot.net/results/98d955fd2fcf4a3db1ab46e4f553447031a23b92/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit b62f2f7f12)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the bump of gnu-efi to version 3.0.17 in Buildroot commit
fa9893ad8f, the build of gnu-efi fails
on ARM big endian and AArch64 big endian.
Indeed, since that bump, gnu-efi builds some "apps", using a special
linker file part of gnu-efi that explicitly sets the architecture:
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
OUTPUT_FORMAT("elf64-littleaarch64", "elf64-littleaarch64", "elf64-littleaarch64")
Due to this, big endian builds are now failing:
armeb-buildroot-linux-gnueabi-ld: ../gnuefi/crt0-efi-arm.o: compiled for a big endian system and target is little endian
armeb-buildroot-linux-gnueabi-ld: failed to merge target specific data of file ../gnuefi/crt0-efi-arm.o
Since we are not really interested in supporting gnu-efi on ARM big
endian and AArch64 big endian and it is not supported upstream, let's
disabled on those architectures.
Fixes:
http://autobuild.buildroot.org/results/4d385d6759346e19664d0bded1e419f004f82b47/ (ARM big endian)
http://autobuild.buildroot.net/results/b6df43408ca4cd469962c96d49d9ac7935b6dbe9/ (AArch64 big endian)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 308d2c9927)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changes with nginx 1.26.2 14 Aug 2024
*) Security: processing of a specially crafted mp4 file by the
ngx_http_mp4_module might cause a worker process crash
(CVE-2024-7347).
Thanks to Nils Bars.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 8f31fea6d0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- gh-115398: Allow controlling Expat >=2.6.0 reparse deferral
(CVE-2023-52425) by adding five new methods:
xml.etree.ElementTree.XMLParser.flush()
xml.etree.ElementTree.XMLPullParser.flush()
xml.parsers.expat.xmlparser.GetReparseDeferralEnabled()
xml.parsers.expat.xmlparser.SetReparseDeferralEnabled()
xml.sax.expatreader.ExpatParser.flush()
- gh-115243: Fix possible crashes in collections.deque.index() when the
deque is concurrently modified.
- gh-114572: ssl.SSLContext.cert_store_stats() and
ssl.SSLContext.get_ca_certs() now correctly lock access to the certificate
store, when the ssl.SSLContext is shared across multiple threads.
For more details, see the changelog:
https://docs.python.org/release/3.11.9/whatsnew/changelog.html#python-3-11-9
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit backports two upstream patches needed to fix
CVE-2023-34410. According to the CVE details, both patches are needed
for the fix.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit backports upstream patches that are needed to fix
CVE-2023-37369. The second one is the actual CVE fix, the first one is
needed to only backporting the second patch in a reasonable way.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit backports upstream patches that are needed to fix
CVE-2023-51714. The second one is the actual CVE fix, the first one is
needed to only backporting the second patch in a reasonable way.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit backports an upstream patch to fix CVE-2023-38197, which
requires 3 other patches to be backported in order to work properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit backports some upstream commits to fix CVE-2023-32763.
To backport the CVE fix, we had to backport two other related patches
to make the backport reasonably clean/straightforward.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/94fd27ea48c4128033ad10cf0dc5dba3f5d97a02/
Commit 4aff9fae45 (package/am335x-pru-package: fix download
issue) updated the filename and hash of the package, but something went
wrong when adjusting the hash for 2024.02.x.
Investigating the local tarball shows that the permissions in the tarball were
were wrong:
diffoscope old-dl/am335x-pru-package/am335x-pru-package-5f374*-br1.tar.gz \
dl/am335x-pru-package/am335x-pru-package-5f374*-br1.tar.gz | \
grep 96/.gitignore
│ │ --rw-rw-rw- 0 0 0 199 2016-02-10 20:56:25.000000 am335x-pru-package-5f374ad57cc195f28bf5e585c3d446aba6ee7096/.gitignore
│ │ +-rw-r--r-- 0 0 0 199 2016-02-10 20:56:25.000000 am335x-pru-package-5f374ad57cc195f28bf5e585c3d446aba6ee7096/.gitignore
And indeed, the file does have mode 666 in the git repo:
ls -lah old-dl/am335x-pru-package/git/.gitignore
-rw-rw-rw- 1 peko peko 199 Aug 31 18:16 old-dl/am335x-pru-package/git/.gitignore
It is unclear how this happened, maybe an issue with switching between
master/2024.05.x/2024.02.x.
Adjust the hash to match what is should have been instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The download and homepage URL for this project have been
updated. The old site no longer works.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 2a547e2c42)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 9f94b3b354 "package/iperf3: bump to version 3.16" updated
the package but forgot to reflect a breaking change mentioned in
the release note [1], "iperf3 now requires pthreads and C atomic
variables to compile and run".
When the toolchain has no atomic support, or the libatomic is not
added in the linker flags, the compilation now fail with output:
arm-buildroot-linux-gnueabi/bin/ld: ./.libs/libiperf.so: undefined reference to '__atomic_load_8'
This issue can be seen when running the iperf3 runtime test, with
command:
support/testing/run-tests \
-d dl -o output_test \
tests.package.test_iperf3
This commit fixes the issue by adding a dependency on
BR2_TOOLCHAIN_HAS_ATOMIC and by adding an upstream patch to detect
if linking to libatomic is needed.
Fixes: [2]
[1] https://github.com/esnet/iperf/releases/tag/3.16
[2] https://gitlab.com/buildroot.org/buildroot/-/jobs/6466933622
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit f10488a411)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Django 5.0.7 fixes the following CVEs:
* CVE-2024-38875: Potential denial-of-service vulnerability in django.utils.html.urlize()
* CVE-2024-39329: Username enumeration through timing difference for users with unusable passwords
* CVE-2024-39330: Potential directory-traversal via Storage.save()
* CVE-2024-39614: Potential denial-of-service vulnerability in get_supported_language_variant()
Django 5.0.8 fixes the following CVEs:
* CVE-2024-41989: Memory exhaustion in django.utils.numberformat.floatformat()
* CVE-2024-41990: Potential denial-of-service vulnerability in django.utils.html.urlize()
* CVE-2024-41991: Potential denial-of-service vulnerability in django.utils.html.urlize() and AdminURLFieldWidget
* CVE-2024-42005: Potential SQL injection in QuerySet.values() and values_list()
Further release Notes: https://docs.djangoproject.com/en/5.0/releases/
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit f777ce1fd6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 9696d27756 "package/gpsd: condition python stuff to the proper
kconfig option" changed the condition in which the gpsd python scripts
are installed. After that change, the "gpsfake" command (which is a
python script) is no longer found and the runtime test is failing.
This commit fixes the issue by reflecting the change in the runtime
test Buildroot configuration.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b6f4d79df2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This didn't work out as planned, neither the restriction of muting
unregistered users, nor the exception for matrix users worked as planned.
The channel mode has been reverted to +R (meaning only registered users
are allowed to join) and an exception for *that* has been introduced for
matrix users via +e. The channel modes are documented in [1].
[1] https://www.oftc.net/ChannelModes/
This reverts commit d1e6d7845b.
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit bede54c774)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building with GCC 14 fails at the configure step with:
./configure: error: libatomic_ops library was not found.
The error is not caused by a missing library, but by an unrelated
"incompatible pointer type" error in the test program:
...
checking for atomic_ops library
objs/autotest.c: In function 'main':
objs/autotest.c:9:48: error: passing argument 1 of 'AO_compare_and_swap' from incompatible pointer type [-Wincompatible-pointer-types]
This used to be a warning, but it is an error since GCC 14.[1]
Fix this by patching the test program in order to use the correct
pointer types.
Fixes: http://autobuild.buildroot.net/results/a3d/a3d8c6fd631b31e272e4d8cc6c3318f2e4151882
[1] https://gcc.gnu.org/gcc-14/porting_to.html#incompatible-pointer-types
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 7d249dab51)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The mysql virtual package was removed in commit 8708f3a23a
"package/mysql: drop virtual package".
The mariadb runtime test was authored before this mysql virtual
package removal, but was merged after it, in commit 5356754d1e
"support/testing: add mariadb runtime test". Due to this, this test
always failed with the error:
Makefile.legacy:9: *** "You have legacy configuration in your .config! Please check your configuration.". Stop.
This commit fixes the issue by removing the legacy
BR2_PACKAGE_MYSQL=y configuration directive.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7540345406
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 3da3361a1b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Maeva told me personally she will no longer contribute to Buildroot
for the time being. This commit removes all the associated DEVELOPERS
entries.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 92d652df48)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we have a Kconfig symbol to enable the python support in
gpsd, but the condition at configure time is based on whether the python
package is enabled. So, if a user does not enable python support in
gpsd, they still get it.
Switch to using the proper symbol.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Bernd Kuhls <bernd@kuhls.net>
Reviewed-by: Jan Havran <havran.jan@email.cz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 9696d27756)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Pass USE_LIBDRM=OFF to the wpewebkit CMake configuration step when the
libdrm package has not been selected.
WPE WebKit can be built without libdrm support, and it will still work
with backends that use other platform-specific methods to handle
graphics buffers and/or presenting content onto an output. For example
this is the case with wpebackend-rdk configured to use rpi-userland,
which uses dispmanx to produce the output instead of DRM/KMS.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 65f8174648)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mdio-tools depends on CONFIG_MDIO_DEVICE in order for mdiobus driver to
be built, but CONFIG_MDIO_DEVICE depends on CONFIG_NETDEVICES which we
are not enabling so on platforms without it enabled in kernel config
building mdio-tools will fail with:
ERROR: modpost: "mdio_find_bus" [output-1/build/mdio-tools-1.3.1/kernel/mdio-netlink.ko] undefined!
ERROR: modpost: "__mdiobus_c45_read" [output-1/build/mdio-tools-1.3.1/kernel/mdio-netlink.ko] undefined!
ERROR: modpost: "__mdiobus_read" [output-1/build/mdio-tools-1.3.1/kernel/mdio-netlink.ko] undefined!
ERROR: modpost: "__mdiobus_c45_write" [output-1/build/mdio-tools-1.3.1/kernel/mdio-netlink.ko] undefined!
ERROR: modpost: "__mdiobus_write" [output-1/build/mdio-tools-1.3.1/kernel/mdio-netlink.ko] undefined!
So enable CONFIG_NETDEVICES as well to make sure CONFIG_MDIO_DEVICE can be enabled.
Fixes: http://autobuild.buildroot.net/results/edf47df96cde6094c890c0b74034cced90335a39/
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b95fff0185)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On the architectures that supports libsanitizer (part of gcc), the
build is currently failing with BR2_TIME_BITS_64=y. This is because
some code in libsanitizer unsets _FILE_OFFSET_BITS, but building code
with _FILE_OFFSET_BITS unset, but _TIME_BITS set isn't legal.
To fix this, this commit backports two changes:
- One change to also unset _TIME_BITS in
sanitizer_platform_limits_posix.cpp. This change is upstream in
LLVM, and already part of GCC 14.x, so we only bringing it to GCC
12.x and GCC 13.x.
- A second change doing the same modification, but in
sanitizer_procmaps_solaris.cpp, which as crazy as it might sound,
also gets compiled on Linux platforms (but to basically an empty
file). This change has been submitted upstream to both LLVM and gcc.
Notes:
- the special PowerPC SPE version of GCC cannot be affected, as only
uClibc-ng is used for this architecture, and uClibc-ng doesn't use
_TIME_BITS=64 (but now default to 64-bit time_t on 32-bit
architectures, like musl does).
- the special ARC version doesn't need patching because libsanitizer
doesn't support the ARC architecture, so it doesn't get built
Fixes:
http://autobuild.buildroot.net/results/ff2dbfdabf0bb6a0d82ea8a80122ab97fd75bd3f/https://gitlab.com/buildroot.org/buildroot/-/issues/16
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 81a4b6e7b8)
[Peter: drop 14.1.0 patch]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The kconfig infra defines a 'PKG_KCONFIG_MAKE' var that wraps all the
standard kconfig options. Switch to this so we aren't duplicating the
logic.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 009d31b438)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 'linux-diff-config' target fails with the below error when
PER_PACKAGE_DIRECTORIES is enabled and the 'host-finalize' target hasn't
run yet.
scripts/Kconfig.include:39: C compiler '.../buildroot/output/host/bin/arm-buildroot-linux-gnueabihf-gcc' not found
The 'PPD' variable isn't defined for this target, so 'BR_PATH' falls
back to the final host directory.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 641084bfb3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 'linux-savedefconfig' target fails with the below error when
PER_PACKAGE_DIRECTORIES is enabled and the 'host-finalize' target hasn't
run yet.
scripts/Kconfig.include:39: C compiler '.../buildroot/output/host/bin/arm-buildroot-linux-gnueabihf-gcc' not found
The 'PPD' variable isn't defined for this target, so 'BR_PATH' falls
back to the final host directory.
Reported-by: Nathaniel Roach <nroach44@gmail.com>
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit de11afaa34)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Runtime tests running on test runners are subject to a high
variability in term of performance and timing. Most or the runtime
test commands are executed with a timeout, in pexpect.
Slow or very loaded test runners can use the timeout_multiplier to
globally increase those timeouts.
Some runtime test commands sometimes needs to poll or query a state,
rather than having purely sequential actions. It is sometimes hard to
know, from the test writer point of view, the maximum timeout to set, or
if a retry logic is needed.
In order to help debugging runtime tests failing due very slow
execution, this commit adds extra information on the host test runner
about its load in the run log. Relevant information are: number of
cpus, the load average at the moment the emulator is started and the
current timeout_multiplier.
Note: this change was discussed in:
https://lists.buildroot.org/pipermail/buildroot/2024-July/759119.html
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 7a6edbc7b9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The libpwquality package provides the pam_pwquality PAM module - the
replacement for pam_cracklib that was dropped from linux-pam back in
version 1.5.0. However, it currently installs it to the wrong place,
so passwd and friends fail to find it. This commit sets the security
directory path to /lib/security to match the corresponding setting in
linux-pam.mk.
Note that libpwquality has *always* installed pam_pwquality in the wrong
place, since version 1.3.0 was added to buildroot in 2017 in commit
462040443c. However, back then, linux-pam
version 1.3.0 still provided pam_cracklib for advanced password checking.
Linux-pam deprecated pam_cracklib in 1.4.0 but still built it for us when
linux-pam.mk set --enable-cracklib. Linux-PAM deleted pam_cracklib
altogether in 1.5.0, so it was not until our update to linux-pam-1.5.1
in commit 276f1e0a89 that pam_cracklib
became unavailable. After that point, pam_pwquality was the only
alternative for PAM-based password checking.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 541eb8bf7d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit allows the package patches to be applied with fuzz factor 0.
The fuzz factor specifies how many lines of the patch can be inexactly
matched, so the value 0 requires all lines to be exactly matched.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit f5226cd6b7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When using BR2_STATIC_LIBS=y, tinysshd's build was successful, but the
binary didn't work on the final target: this is because a dynamically
linked ELF was produced, on a target having no dynamic loader at all.
Using $(TARGET_CONFIGURE_OPTS) propagates all the options and not only
"CC", resulting in a correct static binary able to run on the target.
Without the patch:
> tinysshd: ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV),
> dynamically linked, interpreter /lib/ld-musl-armhf.so.1, stripped
With the patch:
> tinysshd: ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV),
> statically linked, stripped
Fixes: a7b3de8a3b
Signed-off-by: Martin Wetterwald <martin@wetterwald.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 90e22ff48b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This update addresses the issue of uClibc support by skipping ZFS tests
that require SEEK_DATA support.
This is a work-in-progress patch while we wait for an upstream fix.
Current upstream efforts can be followed here:
https://github.com/openzfs/zfs/pull/16169
Context:
- OpenZFS includes a test for a bug that occurs when copying a large
number of PUNCHED files.
- OpenZFS has backported this test to v2.2.x.
- uClibc does not support SEEK_DATA and SEEK_HOLE.
- The ZFS test `cp_stress` can not be compiled using uClibc.
This commit fix:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/7391793226
Signed-off-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit f17fa2c905)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enable DES in openssl to avoid the following build failure raised since
commit a83d41867c:
crypto/apr_crypto_openssl.c: In function 'crypto_cipher_mechanism':
crypto/apr_crypto_openssl.c:385:27: error: implicit declaration of function 'EVP_des_ede3_cbc'; did you mean 'NID_des_ede3_cbc'? [-Wimplicit-function-declaration]
385 | key->cipher = EVP_des_ede3_cbc();
| ^~~~~~~~~~~~~~~~
| NID_des_ede3_cbc
Fixes: a83d41867c
- http://autobuild.buildroot.org/results/4b1088a705f8564f85e629316f5cfc92953f0047
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 8bb67c230b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Change the name from "Micro Python" (two words) to "MicroPython"
(camelcase), to match the official website and documentation.
Signed-off-by: J. Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 161c25aee1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with host gcc >= 14 which enables
-Werror=implicit-function-declaration
(https://gcc.gnu.org/gcc-14/porting_to.html):
configure:9998: checking build system compiler /usr/bin/gcc
configure:10011: /usr/bin/gcc conftest.c
conftest.c: In function 'main':
conftest.c:4:3: error: implicit declaration of function 'exit' [-Wimplicit-function-declaration]
4 | exit(0);
| ^~~~
conftest.c:1:1: note: include '<stdlib.h>' or provide a declaration of 'exit'
+++ |+#include <stdlib.h>
1 | int
conftest.c:4:3: warning: incompatible implicit declaration of built-in function 'exit' [-Wbuiltin-declaration-mismatch]
4 | exit(0);
| ^~~~
conftest.c:4:3: note: include '<stdlib.h>' or provide a declaration of 'exit'
configure:10014: $? = 1
configure:10021: result: no
configure:10026: error: Specified CC_FOR_BUILD doesn't seem to work
Fixes:
- http://autobuild.buildroot.org/results/3ab381f06d5dc030039b6f6f8d19feb55cf3367d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3bb426628c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the default (newest) kernel headers series changes the build can
break. Example error message:
Incorrect selection of kernel headers: expected 6.8.x, got 6.5.x
In the above case the defconfig used:
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.5.9"
The kernel headers were not specified, so the build defaulted to using
the kernel sources as header source and the default (newest) header
series. From .config:
BR2_KERNEL_HEADERS_AS_KERNEL=y
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_8=y
Signed-off-by: Gero Schwäricke <gero.schwaericke@posteo.de>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit eb519ad7cc)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
*ucontext functions are only implemented for a subset of
uClibc supported architectures. To allow the external library
libucontext to be used this small patch is required.
Tested for riscv64.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit f761a8c451)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Release Notes: https://nodejs.org/en/blog/release/v20.15.1
Fixes the following CVE's:
CVE-2024-36138 - Bypass incomplete fix of CVE-2024-27980 (High)
CVE-2024-22020 - Bypass network import restriction via data URL (Medium)
CVE-2024-22018 - fs.lstat bypasses permission model (Low)
CVE-2024-36137 - fs.fchown/fchmod bypasses permission model (Low)
CVE-2024-37372 - Permission model improperly processes UNC paths (Low)
Also these additional CVE's were fixed in the v20.12.1 and v20.12.2 releases [1][2]:
CVE-2024-27983 - Assertion failed in node::http2::Http2Session::~Http2Session() leads to HTTP/2 server crash- (High)
CVE-2024-27982 - HTTP Request Smuggling via Content Length Obfuscation - (Medium)
CVE-2024-27980 - Command injection via args parameter of child_process.spawn without shell option enabled on Windows
NodeJS tests are passing:
$ ./support/testing/run-tests -o ./outputs/ -k tests.package.test_nodejs -d dl
12:02:58 TestNodeJSModuleHostSrc Starting
12:02:58 TestNodeJSModuleHostSrc Building
13:17:15 TestNodeJSModuleHostSrc Building done
13:17:23 TestNodeJSModuleHostSrc Cleaning up
.13:17:23 TestNodeJSModuleHostBin Starting
13:17:23 TestNodeJSModuleHostBin Building
14:06:15 TestNodeJSModuleHostBin Building done
14:06:20 TestNodeJSModuleHostBin Cleaning up
.14:06:20 TestNodeJSBasic Starting
14:06:20 TestNodeJSBasic Building
14:55:40 TestNodeJSBasic Building done
14:55:45 TestNodeJSBasic Cleaning up
LICENSE hash changed due to changes in vendored components:
* copyright year update and adding spdx identifier [1]
[1] https://nodejs.org/en/blog/release/v20.12.1
[2] https://nodejs.org/en/blog/release/v20.12.2
[3] https://github.com/nodejs/node/commit/d5a316f5ea3fade3140c2ae35c144b500fb5d758
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit bffb6a2339)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- fix alphabetical ordering
- put one module per line
- add comment explaining why options are enabled
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 5c20804afa)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Lots of people are using broken text editors that 1. do not naturally
terminate text files with a final \n as is customary in UNIX text files,
and 2. do not respect our .editorconfig settings, which explicitly
require adding that final newline. See this nice summary of what a text
file is (with references to applicable standards):
https://stackoverflow.com/questions/12916352/shell-script-read-missing-last-line/12916758#12916758
So, it is not surprising that read does not read the last "line" of a
file, when said "line" does not end with a newline, because it is thus
not really a line.
Even though we do mandate actual text files, let's be a little bit lax
in this respect, because people may write packages, and their hash
files, in a br2-external tree, and they may not have our .editorconfig
in the directory heierarchy (e.g. if buildroot is a submodule of their
br2-external tree, or whatever).
mapfile does not suffer from this limitation, though, and correctly
reads all lines from a file, even the final line-that-is-not-a-line.
mapfile was introduced in bash 4.0, released on 2009-01-20, more than
15 years ago. Debian squeeze, released in 2011 already had bash 4.1.
Those are really ancient. So, it means we can indeed expect bash
version 4.0 or later; which means mapfile is available.
"It should be fine!"
Fixes: #15976
Reported-by: masonwardle@gmail.com
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit ac2e6b3927)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
According to https://spdx.org/licenses/, the correct license code for
the "Clarified Artistic License" is ClArtistic.
The only other package in Buildroot containing code under this license
is google-breakpad, and it is already using the ClArtistic SPDX code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 2ca698051c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
`b4` is a commandline tool to make patch-based development easier[1]. It
is primarily used for Linux kernel development, but can be configured to
support any project that has a public-inbox endpoint. Buildroot has a
public-inbox mirror at "https://lore.kernel.org/buildroot/".
We configure some basic settings that tell `b4` where to send patches
and how to use get-developers.
[1] https://b4.docs.kernel.org/en/latest/
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 322213e131)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
User may get confused when they see the current hint, and take that as
the proper replacement, while we're only reporting the stem of the
variable name:
.../foo.mk:16: possible typo: BLA -> *FOO*
There is usually no easy way to actually suggest the proper variable
name, though, so let's make it a little bit more obvious that we meant
the variable was improperly prefixed:
.../foo.mk:16: possible typo, variable not properly prefixed: BLA -> *FOO_XXX*
And while at it, throw in the URL to the corresponding manual entry.
Adapt the test accordingly.
Reported-by: "Frager, Neal" <neal.frager@amd.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@datacom.com.br>
Reviewed-by: Neal Frager <neal.frager@amd.com>
[Arnout: also update new test, scoped -> prefixed]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 5836b79762)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, when a package defines an unprefixed variable, but its value
contains a properly prefixed expansion (or even just the name of a
variable), there is not error reported (e.g. with the recently fixed
composer issue):
BASE_SITE = https://getcomposer.org/download/$(COMPOSER_VERSION)/composer.phar
The reason is that he check is done on the whole line, rather than on
the variable that is being set.
We fix that by really looking at the variable we found, instead of
looking in the whole line.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@datacom.com.br>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit b0964df557)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts (partial) commit
e39ad96136, and
26642e4cc0, but also fixed additional
sites where the !BR2_RISCV_32 dependency is no longer needed, thanks
to the recently added
0001-src-xshmfence_futex.h-fix-build-on-32-bit-architectu.patch in
xlib_libxshmfence.
Signed-off-by: Thomas Devoogdt <thomas@devoogdt.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit f30da3dc21)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There was an error in the pkg-cmake infra file regarding the selection
of the ASM compiler. Now that this has been fixed, overwriting the
ASM compiler selection is no longer necessary.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 6384744780)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CMAKE_ASM_COMPILER is supposed to point to a compiler wrapper (i.e.
gcc), _not_ to as directly. If it is not set, it will use the value of
CMAKE_C_COMPILER. That's exactly what we want, so there is no need to
set CMAKE_ASM_COMPILER at all.
For target, we don't set CMAKE_ASM_COMPILER either.
Setting CMAKE_ASM_COMPILER leads to build failures for any package that
actually tries to build .S files for the host - like llvm. This is why
llvm has an override for it.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 22af5f2939)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To give us a chance to catch runtime issues (such as missing
dependencies) more easily, add a test that writes a sample PDF file,
read it back and verify the text that was read.
Like similar packages that lead to a big
rootfs (e.g. python-botocore), this test requires a separate ext2
rootfs to avoid filling the default amount of RAM available
entirely (which would cause missing files from the root filesystem and
in turn, test failures).
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 115e9493b8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the mandatory dependency of MuPDF on X.org, we can also drop
this dependency from python-pymupdf.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit edfa6f2978)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It turns out that python-pymupdf doesn't require zlib directly, but it
does require the zlib python module.
This fixes the following runtime error:
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python3.11/site-packages/fitz/__init__.py", line 22, in <module>
File "/usr/lib/python3.11/site-packages/fitz/fitz.py", line 3402, in <module>
File "/usr/lib/python3.11/gzip.py", line 9, in <module>
ModuleNotFoundError: No module named 'zlib'
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ba6baa019b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The X11 support in mupdf is actually optional, and it does require
libXext in addition to libX11, so adjust the packaging accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 2c0d7b72c0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that MUPDF_CFLAGS and MUPDF_LDFLAGS are just TARGET_CFLAGS and
TARGET_LDFLAGS, drop them.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 90f0a48467)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default mupdf generates static libraries, shared libraries must be
enabled explicitely.
Also, when building shared libraries, mupdf's Makefile properly passes
-fPIC, so adding it manually to MUPDF_CFLAGS is not needed.
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 401162d4a9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This variable might have been needed in the very distant past to help
mupdf find libraries, but mupdf's Makefile now properly uses
pkg-config to find the 5 libraries freetype2, gumbo, harfbuzz, libjpeg
and zlib, so our code has become redundant: drop it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit f7deaa1330)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The build of gcc with Fortran support is broken on gcc 12.x and gcc
13.x, it fails with:
../../../libgfortran/generated/bessel_r8.c: In function 'bessel_yn_r8':
../../../libgfortran/generated/bessel_r8.c:178:1: internal compiler error: in gen_reg_rtx, at emit-rtl.cc:1167
This issue has been fixed in gcc 14.x, which builds a Microblaze
Fortran-capable toolchain successfully.
Since we're not really interested in figuring out the commit that
fixed the problem, let's simply disallow the selection of Fortran with
gcc12/13 on Microblaze.
Fixes:
http://autobuild.buildroot.net/results/5b4eee1d9b119c9f923f9518618f45a6482ddc85/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
(cherry picked from commit 41f2567618)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 809fdb3a7a ("package/gdb:
remove gdb 10.x") and
030497be18 ("package/gdb: remove support
for GDB 11.x"), we forgot to drop the no longer needed hashes from
gdb.hash. Let's do this now.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
(cherry picked from commit 538a99a33a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cdrkit.org no longer works, and there is no obvious homepage for this
dead project. Use the Wikipedia page as a replacement.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit aa549fb95f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
similar to previous problems with nios2 and not-available atomic ints
the build for Boost.Atomics also fails for ARC Targets which don't
have the ATOMICS_EXT flag set.
according to [0] "Boost.Atomic has a hard requirement of the native
atomic operations on bytes". The same tests mentioned there fail for
ARC without the atomic extension.
Disable BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS for BR2_arc
without BR2_ARC_ATOMIC_EXT.
Fixes:
http://autobuild.buildroot.net/results/4ca54a85672d7b9328b1909b457e548c6032a493
[0] https://github.com/boostorg/atomic/issues/42#issuecomment-734130348
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
[Arnout: add to BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS
instead of updating all packages]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit ad71b415c1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The build logic in source/cmake/FindNeon.cmake caused the x265 build
system to always think that the CPU supports neon: it was looking in
/proc/cpuinfo, which of course is wrong when cross-compilation, but
then the sequence of grep was interacting badly with CMake, causing
the build system to always conclude that the CPU supports NEON.
This causes runtime issues on ARMv6.
Setting -DCROSS_COMPILE_ARM=1 fixes this, as it tells the x265 build
system we are cross-compiling and it skips its bogus NEON check. So
for ARMv6, we pass -DCROSS_COMPILE_ARM=1.
But then, we still want NEON for ARMv7 processors with NEON, so this
commit adds a patch that allows to explicitly specify whether the CPU
supports NEON, in the -DCROSS_COMPILE_ARM=1 case, and we use this
option when BR2_ARM_CPU_HAS_NEON.
For those wondering why -DCROSS_COMPILE_ARM=1 is not passed for all
ARM platforms: it's because from the perspective of x265, only ARM >=
v6 is ARM: it has assembly code that needs at least ARMv6. Earlier ARM
platforms are not detected as ARM by the x265 build logic, and
therefore fallback on generic code.
This has been build-tested on:
- ARMv5: generic code is used, no assembly
- ARMv6: assembly code is used, but not with NEON support
- ARMv7 with NEON: assembly code is used, with NEON support
Reported-by: David Barbion <davidb@230ruedubac.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 1fbd26f831)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As we're about to do some other fixes in x265 ARM build, let's replace
the patch fixing gcc option by:
- A patch generated by git format-patch now that x265 upstream uses
Git
- Is re-submitted upstream
- Only drops the flags, and does not add bogus ARM architecture
aliases that don't exist in the CMake world.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 9d62687d00)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
GNU Octave supports the --with-sndfile configure option since v4.0.0.
For reference, commit 40ea68b4b2 "package/octave: new package"
introduced the package at v7.1.0.
This commits adds this optional support.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a5ce48fe45)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This allows uvw to be again in sync with the libuv package, following
the bump of libuv to v1.48 in commit
bd2f99246c ("package/libuv: security
bump to version 1.48")
The hash of the license file has changed due to a copyright year
update.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c54134bf69)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
net/http: denial of service due to improper 100-continue handling
The net/http HTTP/1.1 client mishandled the case where a server responds to
a request with an "Expect: 100-continue" header with a non-informational
(200 or higher) status. This mishandling could leave a client connection in
an invalid state, where the next request sent on the connection will fail.
An attacker sending a request to a net/http/httputil.ReverseProxy proxy can
exploit this mishandling to cause a denial of service by sending "Expect:
100-continue" requests which elicit a non-informational response from the
backend. Each such request leaves the proxy with an invalid connection, and
causes one subsequent request using that connection to fail.
Thanks to Geoff Franks for reporting this issue.
This is CVE-2024-24791
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When build host has a many CPUs (more that 20) and GNU Make 4.4
(included for example in Fedora 40), fwts can randomly fail to build.
This commit adds a package patch to fix the issue.
Fixes:
mv: cannot stat 'dtcompilerparser.tab.c': No such file or directory
mv: cannot stat 'prparser.tab.c': No such file or directory
See also:
https://github.com/fwts/fwts/issues/7
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit f6d9fa3692)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This issue was introduced back in 2009 with commit
e11fe847b2 that created the generic
package infrastructure.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit bd0d5498ea)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When BR2_SHARED_LIBS=y (shared libraries only) and BR2_PIC_PIE=y
(Build code with PIC/PIE), the toolchain-wrapper will try to enable
position-independent code/executables. See [1]. This configuration
is a common default.
Xvisor was likely tested only with RISC-V gcc from [2], which will
not enable PIE by default. Since Xvisor is a Type 1 hypervisor, it
needs the same kind of special treatment as U-Boot or Kernel.
This commit adds a patch to explicitly force static linking and
disable PIE for RISC-V architecture.
[1] https://git.buildroot.org/buildroot/tree/toolchain/toolchain-wrapper.c?h=2023.05.1#n392
[2] https://github.com/riscv-collab/riscv-gnu-toolchain
Signed-off-by: Julien Olivain <ju.o@free.fr>
[Arnout: renumber patch]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 28925c6c86)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Integrate a patch, which was submitted upstream, to work-around an
issue with the SPARC kernel headers. The kernel headers have been
fixed in the upstream kernel (in the to-be-released 6.10 kernel), but
we need a workaround for the older toolchains, until we believe 6.10
is "old" enough to be able to drop the workaround.
Fixes:
http://autobuild.buildroot.net/results/272c464ed4f9392535fa3b7613218dbd03acf901/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b162aab7c6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Although the asciidoc toolchain accepts any number of ~ to delimit a
listing block (i.e. a code block), it is actually specified to be
exactly four, i.e. ~~~~. Currently, a mix of diffrent numbers of ~ are
being used - sometimes even a different number at the beginning and at
the end of the block.
Normalize this to always use exactly four ~ for the delimiter.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 447fa1fca4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently the text for each package infra that mentions the usage of
variables already provided by the generic infra diverge from each other:
- some (golang, kconfig, python) add a cross-referece to the generic
infra chapter;
- kconfig does not list any example;
- some mention _LICENSE as an example, others don't;
- some (cargo, golang, python) add an 'etc.' at the end of the examples,
giving the idea that can be more symbols provided by the generic
infra than the ones listed;
- most have the text 'works by defining a number of variables before
calling the +<macro-name>+ macro', except golang and kconfig;
- some actually list 'A few additional variables' but keep using some
old reference as 'An additional variable';
- some say 'First, all the package metadata' and other only 'All the
package metadata';
- most mention _SUBDIR as an example of variable supported by the
generic infra, even the generic infra manual not mentioning it.
Improve the correctness for the manual by standardizing the text among
the package infras:
- use the same text "All the package metadata information variables that
exist in the generic package infrastructure also exist in the
<name> infrastructure:" for all of them;
- add the cross-reference for all of them;
- remove the examples of variables inherited from the generic infra -
this also solves the _SUBDIR problem, there no longer is any reference
to _SUBDIR;
- wrap the modified text at 80 columns;
- add "macro" to golang and luarocks infra;
- use "A few additional variables" for qmake and waf.
At same time, add a missing format on golang manual for
BR2_PACKAGE_HOST_GO_HOST_ARCH_SUPPORTS.
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Arnout:
- remove the examples;
- add "the" where "macro" was added;
- rewrite the preceding paragraphs for kconfig to make it more
consistent.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 4286c89f9d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Each linux tool uses a fragment of a .mk file, named, for instance:
package/linux-tools/linux-tool-cpupower.mk.in
So currently check-package does not check these files.
Add the support in check-package script.
At the same time, factor out a function to derive package prefix from
the filename being checked, so the fix (calling os.path.splitext twice)
can be applied in a single place.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Arnout: add docstring and explain double splitext to
get_package_prefix_from_filename]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit ccc12c0f24)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch adds .hash files for Arm trusted firmware, Linux, Linux headers
and U-Boot and then enables BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we
can now drop the defconfig from .checkpackageignore.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 751228436a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
qt5webkit build currently breaks on the following error:
XSLStyleSheetLibxslt.cpp:148:129: error: invalid conversion from ‘void (*)(void*, xmlError*)’ {aka ‘void (*)(void*, _xmlError*)’} to ‘xmlStructuredErrorFunc’ {aka ‘void (*)(void*, const _xmlError*)’} [-fpermissive]
148 | XMLDocumentParserScope scope(cachedResourceLoader(), XSLTProcessor::genericErrorFunc, XSLTProcessor::parseErrorFunc, console);
| ^
| |
| void (*)(void*, xmlError*) {aka void (*)(void*, _xmlError*)}
This error is due to an API update in libxml2, enforcing const on more
struct in version 2.12.0 (see [1]). Buildroot now tracks v2.12.5.
Upstream Webkit project has already issued the corresponding fix ([2]),
which updates corresponding internal prototypes depending on libxml2
version, but the qt5webkit version tracked in buildroot does not integrate
the corresponding Webkit version.
Fix this build issue by bringing the upstream patch "as is" from Webkit
No autobuilder references because this build error was hidden by
another build error fixed in a previous patch.
[1] https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.12.0
[2] https://github.com/WebKit/WebKit/commit/1bad176b2496579d760852c80cff3ad9fb7c3a4b
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit e24a117388)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
qt5webkit build currently fails with the following error:
[...] parser.rb:587:in `block in parseSequence': undefined method `=~' for an instance of Annotation (NoMethodError)
from <internal:kernel>:187:in `loop'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:586:in `parseSequence'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:654:in `block in parseSequence'
from <internal:kernel>:187:in `loop'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:586:in `parseSequence'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:814:in `parseData'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:818:in `parse'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:780:in `block in parseSequence'
from <internal:kernel>:187:in `loop'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:586:in `parseSequence'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:625:in `block in parseSequence'
from <internal:kernel>:187:in `loop'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:586:in `parseSequence'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:814:in `parseData'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:818:in `parse'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/generate_offset_extractor.rb:68:in `<main>'
This issue is due to =~ being marked as deprecated since a few Ruby
versions, and finally removed in 3.2.0 [1]. This now breaks the build since
buildroot has moved to Ruby v3.3.0.
The corresponding fix has already been issued in upstream Webkit project
[2], but qt5webkit version tracked in buildroot does not have the
corresponding webkit version pulled. Fix this build error by bringing the upstream
patch. The patch is slightly modified (exclude part about Changelog file,
which is absent from qt5webkit)
Fixes:
http://autobuild.buildroot.net/results/21397b110fe02e5711ecb1d35be2108221751b0a/
[1] https://www.ruby-lang.org/en/news/2022/12/25/ruby-3-2-0-released/
[2] https://github.com/WebKit/WebKit/commit/c7d19a492d97f9282a546831beb918e03315f6ef
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 51ef6691ac)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, qt5webkit fails to build with output:
Applying 0004-Remove-invalid-g_object-declarations-to-fix-build-wi.patch using patch:
patching file Source/WTF/wtf/glib/GRefPtr.h
Hunk #1 FAILED at 29.
1 out of 1 hunk FAILED -- saving rejects to file Source/WTF/wtf/glib/GRefPtr.h.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 6d0cce7dab)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since there are no more packages using FTP-hosted files, we can drop
the --passive-ftp option from genrandconfig, as it would cause
problems on systems that use wget2.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 881a8f1346)
[Peter: slightly reword commit message, no curl backend here]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We're going to add hashes soon, so we'll need to have that directory
populated with hash files, and it would then be a bit confusing to not
have the patch file in the patches directory...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 552a8cec8c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Backport a patch from upstream that adds the magic number for the
bcachefs superblock. Otherwise, systemd 254.13 fails to compile with
the latest kernel versions.
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit f3c1f667dc)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ENABLE_SYSTEMD option has been removed from ubus by upstream commit:
96ab0b3032f5 ubusd: remove systemd socket activation support
From a Buildroot perspective, this means that this systemd socket
activation feature no longer exists since Buildroot commit
130be80d34 ("ubus: bump version"), as we
bumped ubus from 259450f414d8c9ee41896e8e6d6bc57ec00e2b63 to
34c6e818e431cc53478a0f7c7c1eca07d194d692 in this commit, and the
96ab0b3032f5 ("ubusd: remove systemd socket activation support")
commit is in this range. It was therefore dropped upstream in 2016,
and in Buildroot in 2017.
Signed-off-by: Jan Havran <havran.jan@email.cz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 60c8807c69)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The package compilation for the raspberrypi3_qt5we_defconfig raises the
following error:
In file included from buildroot/output/build/snappy-1.1.10/snappy.cc:29:
buildroot/output/build/snappy-1.2.1/snappy-internal.h: In function ‘snappy::internal::V128 snappy::internal::V128_Shuffle(V128, V128)’:
buildroot/output/build/snappy-1.2.1/snappy-internal.h:109:10: error: ‘vqtbl1q_u8’ was not declared in this scope; did you mean ‘vtbl1_u8’?
109 | return vqtbl1q_u8(input, shuffle_mask);
| ^~~~~~~~~~
| vtbl1_u8
make[4]: *** [CMakeFiles/snappy.dir/build.make:118: CMakeFiles/snappy.dir/snappy.cc.o] Error 1
The issue was raised by commit b3fb0b5b4b076 ("Enable vector byte
shuffle optimizations on ARM NEON") contained in version 1.1.10.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 01f35f8875)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add missing stdio.h include. Without this includes, the build fails
with the following error under GCC 14.x:
../../../com32/lib/syslinux/debug.c: In function ‘syslinux_debug’:
../../../com32/lib/syslinux/debug.c:91:5: error: implicit declaration of function ‘printf’ [-Wimplicit-function-declaration]
91 | printf("Dynamic debug unavailable\n");
Signed-off-by: Lance Fredrickson <lancethepants@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3b9d62dac5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
GNU Octave supports the --with-openssl configure option since v4.0.0.
For reference, commit 40ea68b4b2 "package/octave: new package"
introduced the package at v7.1.0.
This commits adds this optional support.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 0e2c2810dc)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 8f88a644ed "support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0" reduced the fuzz factor.
Due to this change, exim fails to build with output:
Applying 0004-exim_lock-fix-lstat-related-build-errors.patch using patch:
patching file src/exim_lock.c
Hunk #1 FAILED at 13.
Hunk #2 succeeded at 27 (offset 1 line).
1 out of 2 hunks FAILED -- saving rejects to file src/exim_lock.c.rej
This commit rebases the package patches on the current package version
when needed.
Fixes:
http://autobuild.buildroot.net/results/ff27d5ebd7f24ac8cb236b83c67c2c75255e51c6/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Yann E. MORIN <yann.morin@orange.com>
Tested-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 20973140c1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Mathieu privately informed me that he no longer has access to the
TS4900 board, he is therefore unable to maintain this board moving
forward. Let's drop his entry from the DEVELOPERS file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 39d23ce823)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Import a patch that has been backported by upstream to the 2.44 release
branch that fixes the build when the target is an ARM processor that
supports NEON instructions.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 8502ac71aa)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit ecc0c1fb12 (package/openssh: disable async-signal-unsafe code in
sshsigdie()) add a patch for CVE-2024-6387 but forgot to add an _IGNORE_CVES
entry. Fix that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The "msd" (mass storage device) firmware files in 2021.07.01 don't
work with some newer CM4 based devices, the one I had issues with is a
RevPi Connect 4. Updating fixes the issue. Mass storage device mode is
required to flash the eMMC of CM4 devices.
Signed-off-by: Fiona Klute <fiona.klute+wiwa@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit fbd9a3f311)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the stmmac driver is configured as a module in the defconfig, which
means that the network functionality is not available until the driver module
is manually inserted.
Use extra config fragment to integrate it directly into the kernel, ensuring that network
functionality is available immediately upon boot.
Signed-off-by: Aleksandr Makarov <aleksandr.o.makarov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 54c82a2375)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit c366ecb95e.
While the change is correct, it causes quite some fallout from packages
using the ENGINE_* API functions without selecting
BR2_PACKAGE_LIBOPENSSL_ENGINES, so drop it from the stable branch.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This introduces the default issue template, to help users provide issues
that are meaningful, and that will help reproduce the issue.
If needed, we can add more templates in the future.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Arnout:
- add link to mailing list;
- rephrase "pristine Buildroot";
- add a checklist item for "I'm using latest commit";
- add a checklist item for "make clean; make";
- add formal items for Buildroot commit sha1 and distro.]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 32aacc4737)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream has changed the archive for the 2.0.7 release since we bumped
in c1f820bd88 (package/daq: bump version to 2.0.7). Comparing the old
archive as it is on s.b.o. with the one currently available on upstream,
gives a few deltas, mostly;
- (C) years changed in comments
- version string changed from 2.0.6 to 2.0.7
- changes (that look legit) to autostuff
- a file dropped (Visual Studio related)
Of course, that means the hashes changed, and no longer match what we
have.
Downloading the file manually and letting wget set the timestamp on it,
reveals the archive is dated 2022-06-08T13:51:59. So, for more than two
years now, we've been relying on the archive we cached on s.b.o.
So, we can't just change the hashes to the new ones, nor can we replace
the archive on s.b.o.
Instead, we use the same trick as was used in c617ebbc97
(package/python-*: fix hashes for cargo-vendored python packages): we
use the actual, real URL with a query parameter as the _SITE, and we set
_SOURCE to a different name so as not to conflict with the previous
archive.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Yoann Congal <yoann.congal@smile.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 9e00cceb60)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The commit fixes the following compilation error:
i686-buildroot-linux-gnu-gcc.br_real: error: unrecognized command-line option ‘-fforce-mem’
From GCC 4.3 release notes [1]:
The -fforce-mem option has been removed because it has had no effect
in the last few GCC releases.
[1] https://gcc.gnu.org/gcc-4.3/changes.html
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 89ba9c5a0b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, libmad fails to build with output:
Applying mips-gcc4.4.diff using series:
patching file fixed.h
Hunk #1 FAILED at 297.
1 out of 1 hunk FAILED -- saving rejects to file fixed.h.rej
The package applied the patches in two steps, first the local ones and
then the official ones downloaded from the repository. The commit fixes
the issue by reversing the order of patch application steps.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit b21184a877)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerability:
- CVE-2024-4323: A memory corruption vulnerability in Fluent Bit versions
2.0.7 thru 3.0.3. This issue lies in the embedded http server’s parsing
of trace requests and may result in denial of service conditions,
information disclosure, or remote code execution.
https://fluentbit.io/announcements/v2.2.3/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even though the "no-engine" option effectively disables the compilation
of the engine, it still creates the installation directory, which ends up
being empty. For this reason, the patch does not remove the hook for
removing the directory if the BR2_PACKAGE_LIBOPENSSL_ENGINES option is
not enabled.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 623d3bbe43)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With version 3.2.0 of OpenSSL, the "no-apps" configuration option was
added, which does not build apps, e.g. the openssl program. This is
handy for minimization. This option also disables tests.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit e0bdc5ddb8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch expresses the same condition in positive logic, consistent
with what has been coded in other parts of the module and generally
in Buildroot.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit c2761b5266)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The bump to version 3.0.9 in commit 3c66f65a6a (package/libopenssl:
bump version to 3.0.9), and all subsequent updates, forgot to change
the directory name, which remained that of version 1.1. The patch
fixes the directory name to be consistent with the version.
In the case the library was not built with engine support, this resulted
in the presence of files in the root file system that should have been
removed.
Fixes: 3c66f65a6a
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 7f9291bfe4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit f77d698f83 changed apply-patches to
use $TAR instead of `tar`, but did not define a fallback if $TAR is not
defined. This results in an error when calling apply-patches.sh from
outside Buildroot's Makefile. Our team uses this script to setup local
checkouts of Buildroot package's with patches for development.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 118c824b56)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Note that here, it is in fact not really relevant. We only extract a
tarball, and we don't use any "modern" or GNU-only options like
--strip-components. However, for consistency it's better to use the same
tar everywhere.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: "Maier, Brandon L Collins" <Brandon.Maier@collins.com>
Reviewed-by: brandon.maier@collins.com
[Arnout: quote TAR="..."]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit f77d698f83)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From the release notes:
================================================================================
Redis 7.2.5 Released Thu 16 May 2024 12:00:00 IST
================================================================================
Upgrade urgency MODERATE: Program an upgrade of the server, but it's not urgent.
Bug fixes
=========
* A single shard cluster leaves failed replicas in CLUSTER SLOTS instead of removing them (#12824)
* Crash in LSET command when replacing small items and exceeding 4GB (#12955)
* Blocking commands timeout is reset due to re-processing command (#13004)
* Conversion of numbers in Lua args to redis args can fail. Bug introduced in 7.2.0 (#13115)
Bug fixes in CLI tools
======================
* redis-cli: --count (for --scan, --bigkeys, etc) was ignored unless --pattern was also used (#13092)
* redis-check-aof: incorrectly considering data in manifest format as MP-AOF (#12958)
Signed-off-by: Titouan Christophe <titouanchristophe@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 61a7edc0c8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is perfectly valid for a patch file to have trailing spaces, when for
example an empty or space-only line is appears in a hunk: if the line if
part of the context, whether it be empty or with only spaces, there will
aways be the leading space introduced by the patch itsef, making for a
sapce-only line; if the line is space-only and removed (or added) that
will also appear as a space-only line.
Currently, our editorconfig wants to unconditionally drop trailing
spaces, so when one edits a patch file to add their SoB and Upstream
tags, such a patch would get badly mangled and would not apply, causing
quite some grief and questioning (sad experience looming in the recent
past here)...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 85736a27c8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The matching in genrandconfig is idiomatically done by matching whole
lines, i.e. with the terminating \n but a few places are missing that.
Those are only matching against '=y', a boolean symbol, so it is in
practice not causing any issue. Still, for consistency, fix those.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 8b8f5e3366)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Previously, when running `PYTHON3_REMOVE_USELESS_FILES`, the hook to
clean up files from the python config directory assumed a pattern of
"config-$(VERSION)m-$(PLATFORM_TRIPLET)".
However, the "m" ABI suffix was dropped in python 3.8, so the hook would
never actually find files to delete. No error was raised due to the use
of a subshell to invoke find.
Also, if a platform triplet is not detected during the configure stage,
the config directory (LIBPL) defaults to `config-$VERSION`, and has no
trailing `-$PLATFORM_TRIPLET`.
Now, we glob anything after the version to ensure files get deleted.
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit a1efb5427b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When running a test that uses host-python-setuptools using the Buildroot
Docker image, for example running the following command,
> ./utils/docker-run ./support/testing/run-tests -o output -s -k tests.package.test_python_pytest.TestPythonPy3Pytest
The build fails with the following error,
> File "/home/blmaier/buildroot/output/TestPythonPy3Pytest/build/host-python-setuptools-69.2.0/setuptools/_distutils/dist.py", line 354, in _gen_paths
> yield pathlib.Path('~').expanduser() / filename
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> File "/home/blmaier/buildroot/output/TestPythonPy3Pytest/host/lib/python3.11/pathlib.py", line 1385, in expanduser
> raise RuntimeError("Could not determine home directory.")
> RuntimeError: Could not determine home directory.
>
> ERROR Backend subprocess exited when trying to invoke get_requires_for_build_wheel
Python setuptools is looking for $HOME but failing to find it.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 4dafb8b5c2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Later commits will start using this variable.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Arnout: quote TAR="..."]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit ce6b48c2cf)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Debian control aarchive does not contain any patch for liblockfile
1.17; it has had no patch since Debian packaged version 1.16-1.1.
Drop the path tarball now.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Arnout: also drop from hash file]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit f84c8d1716)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No functional change as we install a python symlink, but use python3 for
consistency with the other scripts.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit ed9288505c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Host build fails on updated Arch Linux desktop.
My current /usr/bin/gcc version is 14.1.1 20240522, where
implicit-function-declaration cause build to fail:
2024-06-05T07:03:20 libtool: compile: /home/roy/hymatek/connexi-touchpanel-firmware/mxxf1/output/host/bin/ccache /usr/bin/gcc -DHAVE_CONFIG_H -I. -I.. -I. -I../include -Iinclude -I../src -I/home/roy/hymatek/connexi-touchpanel-firmware/mxxf1/output/host/include -Wall -O2 -I/home/roy/hymatek/connexi-touchpanel-firmware/mxxf1/output/host/include -fexceptions -c ../src/tramp.c -fPIC -DPIC -o src/.libs/tramp.o
2024-06-05T07:03:20 ../src/tramp.c: In function ‘ffi_tramp_get_temp_file’:
2024-06-05T07:03:20 ../src/tramp.c:262:22: error: implicit declaration of function ‘open_temp_exec_file’ [-Wimplicit-function-declaration]
2024-06-05T07:03:20 262 | tramp_globals.fd = open_temp_exec_file ();
2024-06-05T07:03:20 | ^~~~~~~~~~~~~~~~~~~
Patch from master was added to fix build.
Signed-off-by: Roy Kollen Svendsen <roy.kollen.svendsen@akersolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following CVEs:
CVE-2024-24789: archive/zip: mishandling of corrupt central directory record
CVE-2024-24790: net/netip: unexpected behavior from Is methods for IPv4-mapped IPv6 addresses
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When using imx-mkimage 6.1.36_2.1.0 or later, an additional data structure
is inserted in the generated image. The FIT external data position passed
to the uboot mkimage program needs to be adjusted accordingly.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=15973
Fixes: 72de789023 ("package/imx-mkimage: bump version to lf-6.1.36-2.1.0")
Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
[Sébastien: Tested on i.MX8MM EVK and i.MX8MP EVK]
[Sébastien:
- fix subject
- add Tested-by tag
- fix Fixes tags
]
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit baaf7f738a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It has been well over 10 years since glibc 2.14 was released; the last
Debian version that had an earlier glibc was Wheezy, which Freexian
stopped to maintain as an ELTS in June 2020, 4 years ago, while the
oldest still maintained Ubuntu has glibc 2.21. It is now safe to assume
glibc 2.14 on all major, relevant distributions nowadays.
The distutils module is no longer bundled with python 3.12 so this
eliminates the need to install additional python modules under python
3.12.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr: add Debian and Ubuntu references]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 929a491f40)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When systemd and tpm2-tss with fapi support are enabled, the fakeroot
script fail with:
<stdin>:35: Failed to resolve user 'tss': No such process.
When fapi support is enabled, tpm2-tss package install additional
configuration files that are expecting tss user and group exist [1].
/etc/sysusers.d/tpm2-tss.conf
/etc/tmpfiles.d/tpm2-tss-fapi.conf
The build fail in the fakeroot environment while handling tmpfiles
installed by tpm2-tss with fapi by host-systemd.
tss user and group is currently created by the tpm2-abrmd package but
tpm2-tss package also provide a udev rule file tpm-udev.rules [2] that
set the ownership of dev nodes /dev/tpmX and /dev/tpmrmX to tss
user/group. So tpm2-tss package must define TPM2_TSS_USERS to create
tss user and group, not tpm2-abrmd package.
So, move TPM2_ABRMD_USERS to TPM2_TSS_USERS.
Note: tpm2-abrmd is nowadays deprecated since the in-kernel Resource
Manager (available since kernel 4.12) is preferred [3].
[1] https://github.com/tpm2-software/tpm2-tss/blob/4.1.3/INSTALL.md?plain=1#L184
[2] https://github.com/tpm2-software/tpm2-tss/blob/4.1.3/dist/tpm-udev.rules
[3] https://github.com/tpm2-software/tpm2-abrmd/blob/3.0.0/README.md?plain=1#L39
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 2cdd3d1ccf)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The tarball (with .tar.gz extension but same content) is also available over
https from sourceforge, so use that instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit e5993e6cd4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ftp server does not respond, so change to https:// instead. Here the
3.2.6 version is under older_versions.
wget ftp://ftp.ncftp.com/ncftp/ncftp-3.2.6-src.tar.gz
--2024-06-03 08:10:44-- ftp://ftp.ncftp.com/ncftp/ncftp-3.2.6-src.tar.gz
=> ‘ncftp-3.2.6-src.tar.gz’
Resolving ftp.ncftp.com (ftp.ncftp.com)... 209.197.102.38
Connecting to ftp.ncftp.com (ftp.ncftp.com)|209.197.102.38|:21... ^C
http redirects to https, so update the help text to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 3eb84214a1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ftp server does not allow anonymous login, causing the download to fail:
wget --passive-ftp -nd -t 3 -O '/home/peko/source/buildroot/output-qt/build/.lynx2.8.9rel.1.tar.bz2.XlcdCK/output' 'ftp://ftp.invisible-island.net/lynx/tarballs/lynx2.8.9rel.1.tar.bz2'
--2024-06-02 22:21:49-- ftp://ftp.invisible-island.net/lynx/tarballs/lynx2.8.9rel.1.tar.bz2
=> ‘/home/peko/source/buildroot/output-qt/build/.lynx2.8.9rel.1.tar.bz2.XlcdCK/output’
Resolving ftp.invisible-island.net (ftp.invisible-island.net)... 216.194.253.29
Connecting to ftp.invisible-island.net (ftp.invisible-island.net)|216.194.253.29|:21... connected.
Logging in as anonymous ...
Login incorrect.
Luckily the tarball is also available over https://, so use that instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr:
- use https, not http
- drop trailing '/' in _SITE
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit d946d31325)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ftp.astrom.com also serves the files over https://, so use that instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr: use https, not http]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 02f6617b68)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For consistency, adapt the reference in the hash file too.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr: switch to https as suggested by Baruch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 1efc1e7b90)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since qt5base was last bumped in 8ab4a0a348 (package/qt5: bump packages
to latest kde submodule versions), the hash for the downloaded tarball
has changed:
$ make qt5base-source
[...]
ERROR: expected: 935d01f5c34903ad9e979431cec7a8a59332ed3fc539e639f5ba87e8d6989b9d
ERROR: got : 3067c4d84ba9927bfe65bf606c17af082199e0a3b22781fbf9bc6c6bc3de26dd
We know the hash was good back when 8ab4a0a348 was applied, because
the tarball has been cached on sources.buildroot.org with the expected
hash:
$ curl 'https://sources.buildroot.net/qt5base/qtbase-da6e958319e95fe564d3b30c931492dd666bfaff.tar.bz2' 2>/dev/null |sha256sum -
935d01f5c34903ad9e979431cec7a8a59332ed3fc539e639f5ba87e8d6989b9d -
But now, the archive generated by the KDE gorge (Gitlab underneath) has
another hash (as seen above). This means that the KDE forge (Gitlab) has
changed the way it generates archives. So, what's the delta? It turns
out that the only changes are about CRLF that were present in the
original archive, and are no longer in the new one. It is to be noted
that the affected files do not have CRLFS in the repository. It further
turns out that the archive was previously generated with .gitattibutes
of the main branch ('dev' in Qt repositories), while now they are
generated with the .gitattibutes of the commit for which they are
generated.
Switch to using the git download method for really reproducible
archives...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Sebastian Weyer <sebastian.weyer@smile.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 75da04c817)
[Peter: adjust for filename/hash used on 2024.02.x]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, when we generate archives, e.g. for git, svn, cargo or go, we
use the package _BASENAME_RAW as the root directory of the generated
archive. For example, for package foo at version 1.2.3, that would generate
an archive rooted at foo-1.2.3/.
This is usually what we want, except in one specific condition: when the
package shares its download with another package *and* it is a generated
archive. In that case, the root directory will be different for each of
the two packages, which is incorrect, but was so far benign: we never
had any hash for such generated archives, and they were only generated
in two cases:
- linux and linux-headers
- barebox and barebox-aux
As we skip one directory depth when extracting the archives, we did not
care what the root directory was; whether it was that of one package or
the other was of no consequence.
But now that we can have hashes for archives generated from custom
versions, this breaks the usual case where the headers used for the
toolchains are those of the kernel to build for the target. In this
case, we may end up downloading the linux-headers package before we
download the linux package, so we'd get the hash for an archive rooted
at linux-headers-XXX/, but the one for the linux package the archive
would be rooted at linux-XXX/, or we may end up (e.g. with parallel
builds) downloading the linux package first and linux-headers next.
That would cause conflicts in hashes, as demonstrated by the only defconfig
we have in that situation, olimex_stmp157_olinuxino_lime_defconfig.
_BASENAME_RAW is a construct that is expanded to include the RAWNAME
followed by a dash and the version, if there is a version, or with just
the RAWNAME when there is no version.
We tweak the download macro to use _DL_SUBDIR followed by the version.
This is only used by VCS backends (cvs, git, svn...) and so there will
always be a version string, so no need to duplicate the case without a
version like is done for _BASENAME_RAW
_DL_SUBDIR defaults to _RAWNAME, so this is a noop by default, unless
the package declares it shares its download with another one, in which
case the generated archive will now be rooted as for the shared package.
This was triggered by:
https://patchwork.ozlabs.org/project/buildroot/patch/20240602070634.597337-1-francois.perrad@gadz.org/
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit ebe238f2b5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The gcc 13.x. version was bumped to 13.3.0 by commit 5d9c54de0c
(package/gcc: update to 13.3.0), so update gcc-bare-metal to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Restarting dnsmasq can cause constant issues: stop works, but start
fails because the new instance can't bind the socket. Another restart
immediately after works just fine:
# /etc/init.d/S80dnsmasq restart
Stopping dnsmasq: OK
Starting dnsmasq:
dnsmasq: failed to create listening socket for 192.168.128.1: Address in use
FAIL
# /etc/init.d/S80dnsmasq restart
Stopping dnsmasq: FAIL
Starting dnsmasq: OK
Solve this by waiting for process to actually stop before returning
from the stop command. Clean up the PID file after to avoid potential
issues with the PID being reused after stop. The wait could also be
placed inside the restart block, but putting it into the stop block
has the advantage that it also avoids similar issues for any other
callers.
Signed-off-by: Fiona Klute <fiona.klute+wiwa@gmx.de>
[yann.morin.1998@free.fr:
- fix shellcheck
- reflow commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 507caef3dd)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This requires python 3.5 or newer but is a bit cleaner than the
previous coroutine method.
This should also fix a python3.12 issue:
[Tue, 28 May 2024 13:09:05] INFO: generate the configuration
Traceback (most recent call last):
File "/home/autobuild/autobuild/instance-0/buildroot/utils/genrandconfig", line 833, in <module>
ret = asyncio.run(gen_config(args))
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.12/asyncio/runners.py", line 194, in run
return runner.run(main)
^^^^^^^^^^^^^^^^
File "/usr/lib/python3.12/asyncio/runners.py", line 89, in run
raise ValueError("a coroutine was expected, got {!r}".format(coro))
ValueError: a coroutine was expected, got <generator object gen_config at 0xffff7bd822c0>
[Tue, 28 May 2024 13:09:06] WARN: failed to generate configuration
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Vincent Fazio <vfazio@xes-inc.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 584ebdea6e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Most boards use BR2_KERNEL_HEADERS_AS_KERNEL with their custom kernels.
So when creating their custom hash files, the linux-headers.hash is the
same as linux.hash. In this case we symlink linux-headers to linux to
make maintenance easier. Update the add-custom-hashes tool to explicitly
handle this case.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
[Peter: use cmp -s]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit d506e232e7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Ccache CMake build system has some conditions that automatically
enables a developer mode (sets CCACHE_DEV_MODE=ON). See [1].
More specifically, if CCACHE_DEV_MODE is unset AND the environment
variable "CI" is set, CCACHE_DEV_MODE is set to "ON".
This situation can happen when Buildroot builds are executed in
Jenkins jobs, for example. Since Buildroot does not set
CCACHE_DEV_MODE and Jenkins sets the "CI" environment variable,
this ccache developer mode can be enabled in an unexpected way
for the Buildroot user. For example, it happened that a Jenkins build
breaks, while the build with the same configuration in the user
session is working.
One of the effects of enabling this ccache developer mode, is to treat
compiler warnings as errors, see [3]. This can lead to build error,
depending on the ccache version and the host compiler being used.
This behavior can be reproduced and observed, with commands:
cat > .config <<EOF
BR2_aarch64=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_CCACHE=y
BR2_PACKAGE_BUSYBOX=y
EOF
make olddefconfig
make clean
make host-ccache
Outputs:
...
-- Ccache version: 4.9.1
-- Ccache dev mode: OFF
-- Setting CMAKE_BUILD_TYPE to Release as none was specified.
...
Whereas:
make clean
CI=true make host-ccache
Outputs:
...
-- Ccache version: 4.9.1
-- Ccache dev mode: ON
-- Setting CMAKE_BUILD_TYPE to Debug as none was specified.
...
For a failure example: on Fedora 40 with host gcc 14.1.1, Buildroot at
tag 2024.02 has ccache 4.8.2. Host ccache can fail, when building with
"CI=true make host-ccache" with output:
/buildroot/output/build/host-ccache-4.8.2/src/third_party/fmt/core.h:3119:44: in 'constexpr' expansion of 'fmt::v8::make_format_args<>(args#0, args#1)'
/buildroot/output/build/host-ccache-4.8.2/src/third_party/fmt/core.h:1706:15: error: possibly dangling reference to a temporary [-Werror=dangling-reference]
1706 | const auto& arg = arg_mapper<Context>().map(std::forward<T>(val));
| ^~~
This commit sets CCACHE_DEV_MODE=OFF to make the ccache behavior more
deterministic in Buildroot, independently of being used in a CI tool
or not.
[1] https://github.com/ccache/ccache/blob/v4.9.1/CMakeLists.txt#L56
[2] https://github.com/jenkinsci/jenkins/blob/jenkins-2.459/core/src/main/java/jenkins/model/CoreEnvironmentContributor.java#L43
[3] https://github.com/ccache/ccache/blob/v4.9.1/cmake/StandardWarnings.cmake#L5
Reported-by: Xavier Roumegue <xroumegue@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 197be7ed87)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new stable series brings in support for pointer lock, customization
of subprocess launching, and a build fix that allows using EGL
implementations that do not ship a pkg-config module. Version 1.16.x is
recommended for WPE WebKit 2.44.x, which will be updated in a follow-up
patch.
Release notes:
https://wpewebkit.org/release/libwpe-1.16.0.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 8845a796bb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Run-time dependency xcb-cursor found: NO (tried pkgconfig and cmake)
../../br-test-pkg/bootlin-armv7-glibc/build/weston-13.0.0/tests/meson.build:340:2: ERROR: Problem encountered: xcb and xcb-cursor required for running xwayland tests
Fixes:
- https://bugs.busybox.net/show_bug.cgi?id=15766
Signed-off-by: Thomas Devoogdt <thomas@devoogdt.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit fb952e1116)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 2e349be94a (configs/orangepi_pc_defconfig: bump U-boot to
v2024.01 to fix compatibility with setuptools >= 69) bumped U-Boot, but
forgot to add a dependency on host-openssl. Fix that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 96e41a849e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with kernel >= 6.7:
/home/buildroot/autobuild/instance-0/output-1/build/cryptodev-linux-1.13/./cryptlib.c: In function ‘cryptodev_hash_init’:
/home/buildroot/autobuild/instance-0/output-1/build/cryptodev-linux-1.13/./cryptlib.c:384:28: error: implicit declaration of function ‘crypto_ahash_alignmask’; did you mean ‘crypto_aead_alignmask’? [-Werror=implicit-function-declaration]
384 | hdata->alignmask = crypto_ahash_alignmask(hdata->async.s);
| ^~~~~~~~~~~~~~~~~~~~~~
| crypto_aead_alignmask
Fixes:
- http://autobuild.buildroot.org/results/466360c7baec2edf42dc6f0ad9a8d757dd471c88
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 15ec07403f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following or1k build failure raised since bump to version 0.2.2
in commit 079d992b27:
In file included from /home/buildroot/autobuild/run/instance-0/output-1/host/or1k-buildroot-linux-uclibc/sysroot/usr/include/lua.hpp:6,
from ../src/lua.hh:23,
from ../src/parser.hh:4,
from ../src/ffilib.cc:7:
../src/ffilib.cc: In static member function 'static void ffi_module::setup(lua_State*)':
../src/ffilib.cc:1616:28: error: expected ')' before 'FFI_ARCH_NAME'
1616 | lua_pushliteral(L, FFI_ARCH_NAME);
| ^~~~~~~~~~~~~
Fixes: 079d992b27
- http://autobuild.buildroot.org/results/4e14753732c5b6fe8ba9ecc4050ffb35f471c428
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 9b07b4bf6d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/6865597706
setuptools.extern.packaging.version.InvalidVersion: Invalid version: 'u-boot-2020.10'
make[5]: *** [scripts/dtc/pylibfdt/Makefile:30: scripts/dtc/pylibfdt/_libfdt.so] Error 1
make[4]: *** [scripts/Makefile.build:419: scripts/dtc/pylibfdt] Error 2
make[4]: *** Waiting for unfinished jobs....
make[3]: *** [scripts/Makefile.build:419: scripts/dtc] Error 2
make[2]: *** [Makefile:577: scripts] Error 2
make[1]: *** [package/pkg-generic.mk:283: /builds/buildroot.org/buildroot/output/build/uboot-2020.10/.stamp_built] Error 2
Commit 6b62384e3d (package/python-setuptools: bump to version 69.0.3)
bumped setuptools, which now errors out when passed a version with a prefix
string. This u-boot- prefix string is dropped since U-Boot 2023.01 with
commit c977b1843504 (libfdt: Fix invalid version warning), so bump U-Boot to
v2024.01 to fix this issue.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 2e349be94a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Mutt 2.2.13 was released on March 9, 2024. This is a bug-fix release,
fixing a possible dangling pointer reference in the SMTP client.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 730de6c00e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/6865597717
setuptools.extern.packaging.version.InvalidVersion: Invalid version: 'u-boot-2020.10'
make[5]: *** [scripts/dtc/pylibfdt/Makefile:30: scripts/dtc/pylibfdt/_libfdt.so] Error 1
make[4]: *** [scripts/Makefile.build:419: scripts/dtc/pylibfdt] Error 2
make[4]: *** Waiting for unfinished jobs....
make[3]: *** [scripts/Makefile.build:419: scripts/dtc] Error 2
make[2]: *** [Makefile:577: scripts] Error 2
make[1]: *** [package/pkg-generic.mk:283: /builds/buildroot.org/buildroot/output/build/uboot-2020.10/.stamp_built] Error 2
Commit 6b62384e3d (package/python-setuptools: bump to version 69.0.3)
bumped setuptools, which now errors out when passed a version with a prefix
string. This u-boot- prefix string is dropped since U-Boot 2023.01 with
commit c977b1843504 (libfdt: Fix invalid version warning), so bump U-Boot to
v2024.01 to fix this issue.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
(cherry picked from commit 113eeb55d6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following warning:
orangepi_r1_defconfig:35:warning: override: reassigning to symbol BR2_PACKAGE_HOST_UBOOT_TOOLS
While we're at it, move the HOST_UBOOT_TOOLS_* options where savedefconfig
would put them.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
(cherry picked from commit 0ba568276a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The python-magic-wormhole runtime test can randomly fail on slow
runners, see [1].
The issue is that the sending command is started first in background
_without_ redirecting its output to /dev/null. The receiving command
is started after, expecting the message to be printed on the first
standard output line. On slower systems, the sending command still
print messages while the test controller expect output from the
receiving command. The expected string finally appear, but not on the
first line. This makes the test fail.
This commit fixes the issue by redirecting all outputs (stdout, stderr)
of the sending command to /dev/null. To help even more, the sleep time
is moved from the emulator to the test controller. The sleep time is
also multiplied by the timeout_multiplier.
Fixes: [1]
[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/6888691508
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
(cherry picked from commit 9a734700d7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ivi-homescreen needs C++17 filesystem resulting in the following build
failure with gcc < 8 since its addition in commit
9d8497e79d:
In file included from /home/buildroot/instance-0/output-1/build/ivi-homescreen-5ab78a19e95c88cc5d6b173ab1260a211e78cf0a/third_party/flutter/shell/platform/common/path_utils.cc:5:0:
/home/buildroot/instance-0/output-1/build/ivi-homescreen-5ab78a19e95c88cc5d6b173ab1260a211e78cf0a/third_party/./flutter/shell/platform/common/path_utils.h:8:10: fatal error: filesystem: No such file or directory
#include <filesystem>
^~~~~~~~~~~~
Fixes: 9d8497e79d
- http://autobuild.buildroot.org/results/a5e88d5a4264a6165be31a99f1c123af53fa382e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 898cf04e47)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following python build failure:
In file included from /home/buildroot/instance-0/output-1/host/include/python3.11/Python.h:38,
from /home/buildroot/instance-0/output-1/host/arc-buildroot-linux-gnu/sysroot/usr/include/pybind11/detail/common.h:266,
from /home/buildroot/instance-0/output-1/host/arc-buildroot-linux-gnu/sysroot/usr/include/pybind11/attr.h:13,
from /home/buildroot/instance-0/output-1/host/arc-buildroot-linux-gnu/sysroot/usr/include/pybind11/detail/class.h:12,
from /home/buildroot/instance-0/output-1/host/arc-buildroot-linux-gnu/sysroot/usr/include/pybind11/pybind11.h:13,
from /home/buildroot/instance-0/output-1/build/gr-osmosdr-0.2.4/python/bindings/device_python.cc:1:
/home/buildroot/instance-0/output-1/host/include/python3.11/pyport.h:596:2: error: #error "LONG_BIT definition appears wrong for platform (bad gcc/glibc config?)."
596 | #error "LONG_BIT definition appears wrong for platform (bad gcc/glibc config?)."
| ^~~~~
Fixes:
- http://autobuild.buildroot.org/results/f009958c37902a224512b336fcb431903bdd0b96
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 8759d81b00)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The busybox sysctl applet expects all arguments after -p to be filenames to
read:
sysctl -p file -h
sysctl: -h: No such file or directory
VS:
sysctl -h -p file
sysctl: invalid option -- 'h'
BusyBox v1.36.1 (2024-05-17 15:27:21 CEST) multi-call binary.
Usage: sysctl [-enq] { -a | -p [FILE]... | [-w] [KEY[=VALUE]]... }
Show/set kernel parameters
-e Don't warn about unknown keys
-n Don't show key names
-q Quiet
-a Show all values
-p Set values from FILEs (default /etc/sysctl.conf)
-w Set values
This seems to be the intented behaviour:
https://git.busybox.net/busybox/tree/procps/sysctl.c#n317
Notice: The procps-ng variant is happy with both:
sysctl -p file -h
Usage:
sysctl [options] [variable[=value] ...]
VS:
sysctl -h -p file
Usage:
sysctl [options] [variable[=value] ...]
So pass SYSCTL_ARGS before the -p args so custom sysctl arguments can be
passed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 60b02eb6c6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit ee59023794 (package/libvncserver: bump to version 0.9.12)
changes the package from autotools to cmake and accidently inverted the
threads logic.
The reason this was not noticed is that the build system verifies if threads
support works and otherwise disables it even when -DWITH_THREADS=ON is
passed, E.G. for a nothread configuration:
cmake ... -DWITH_THREADS=ON ...
..
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Failed
-- Looking for pthread_create in pthreads
-- Looking for pthread_create in pthreads - not found
-- Looking for pthread_create in pthread
-- Looking for pthread_create in pthread - not found
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 7b3c0b19d4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
webkitgtk/wpewebkit needs a host-ruby with yaml support, otherwise the build
fails with errors like:
cd /home/peko/source/buildroot/output/build/webkitgtk-2.42.2/Source/WebCore && \
/home/peko/source/buildroot/output/host/bin/ruby \
/home/peko/source/buildroot/output/build/webkitgtk-2.42.2/Source/WebCore/Scripts/GenerateSettings.rb \
--outputDir /home/peko/source/buildroot/output/build/webkitgtk-2.42.2/WebCore/DerivedSources \
--template /home/peko/source/buildroot/output/build/webkitgtk-2.42.2/Source/WebCore/Scripts/SettingsTemplates/InternalSettingsGenerated.cpp.erb \
--template /home/peko/source/buildroot/output/build/webkitgtk-2.42.2/Source/WebCore/Scripts/SettingsTemplates/InternalSettingsGenerated.idl.erb \
--template /home/peko/source/buildroot/output/build/webkitgtk-2.42.2/Source/WebCore/Scripts/SettingsTemplates/InternalSettingsGenerated.h.erb \
--template /home/peko/source/buildroot/output/build/webkitgtk-2.42.2/Source/WebCore/Scripts/SettingsTemplates/Settings.cpp.erb \
--template /home/peko/source/buildroot/output/build/webkitgtk-2.42.2/Source/WebCore/Scripts/SettingsTemplates/Settings.h.erb \
/home/peko/source/buildroot/output/build/webkitgtk-2.42.2/WTF/Scripts/Preferences/UnifiedWebPreferences.yaml \
/home/peko/source/buildroot/output/build/webkitgtk-2.42.2/Source/WebCore/page/Settings.yaml
/home/peko/source/buildroot/output/host/lib/ruby/3.3.0/yaml.rb:3: warning: It seems your ruby installation is missing psych (for YAML output).
To eliminate this warning, please install libyaml and reinstall your ruby.
We do not currently have any Config.in.host options for ruby or libyaml, but
given how small/fast libyaml is to build just do it unconditionally.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 95093854e4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is bugfix release of stable libmdbx branch.
The most significant fixes since v0.12.8 (previous version pinned to
buildroot):
- Fixed an major bug inherited from LMDB (Lightning Memory-Mappe
Database) that causes database corruption during use the
MDBX_DUPFIXED mode, and that has existed for more than 10 years.
- Fixed of a false error MDBX_CORRUPTED (-30796) in the scenario of
working in the mode MDBX_DUPFIXED with odd length of multi-values.
- Fixed a bug in adjusting the cursors in the case splitting a page by
adding a new page on the left.
- Troubleshooting an error when opening a database on a read-only file
system.
- A set of C++ API improvements.
The complete ChangeLog:
https://gitflic.ru/project/erthink/libmdbx/blob?file=ChangeLog.md
Signed-off-by: Леонид Юрьев (Leonid Yuriev) <leo@yuriev.ru>
[yann.morin.1998@free.fr: ammend and reflow the commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit aea54eab47)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
FSID daemon and its systemd unit file both depend on
BR2_PACKAGE_NFS_UTILS_RPC_NFSD but they're now always installed. Remove them
both if BR2_PACKAGE_NFS_UTILS_RPC_NFSD is disabled.
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Jan Čermák <sairon@sairon.cz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit dc3464c4b6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Osmosdr failed to build docs when python support is enabled.
[ 41%] Copying osmosdr docstring templates as pybind headers ...
Traceback (most recent call last):
File "/home/martb/Schreibtisch/DiscoSAT/satos/output/build/gr-osmosdr-0.2.4/docs/doxygen/update_pydoc.py", line 22, in <module>
from doxyxml import DoxyIndex, DoxyClass, DoxyFriend, DoxyFunction, DoxyFile
File "/home/martb/Schreibtisch/DiscoSAT/satos/output/build/gr-osmosdr-0.2.4/docs/doxygen/doxyxml/__init__.py", line 69, in <module>
from .doxyindex import DoxyIndex, DoxyFunction, DoxyParam, DoxyClass, DoxyFile, DoxyNamespace, DoxyGroup, DoxyFriend, DoxyOther
File "/home/martb/Schreibtisch/DiscoSAT/satos/output/build/gr-osmosdr-0.2.4/docs/doxygen/doxyxml/doxyindex.py", line 31, in <module>
from .generated import index
File "/home/martb/Schreibtisch/DiscoSAT/satos/output/build/gr-osmosdr-0.2.4/docs/doxygen/doxyxml/generated/index.py", line 13, in <module>
from . import compound
File "/home/martb/Schreibtisch/DiscoSAT/satos/output/build/gr-osmosdr-0.2.4/docs/doxygen/doxyxml/generated/compound.py", line 15, in <module>
from . import compoundsuper as supermod
File "/home/martb/Schreibtisch/DiscoSAT/satos/output/build/gr-osmosdr-0.2.4/docs/doxygen/doxyxml/generated/compoundsuper.py", line 15, in <module>
import six
ModuleNotFoundError: No module named 'six'
make[2]: *** [python/bindings/CMakeFiles/osmosdr_docstrings.dir/build.make:73: python/bindings/docstring_status] Fehler 1
make[1]: *** [CMakeFiles/Makefile2:332: python/bindings/CMakeFiles/osmosdr_docstrings.dir/all] Fehler 2
Fixes:
http://autobuild.buildroot.net/results/b60e339e52fbc7ed7607a94381aaab6ec64b7a99/
Signed-off-by: Martin Böh <contact@martb.dev>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit cfda1f0b87)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add -fPIC to CFLAGS to fix the following build failure raised since
commit de6415ad9c:
/home/autobuild/autobuild/instance-5/output-1/host/lib/gcc/x86_64-buildroot-linux-gnu/12.3.0/../../../../x86_64-buildroot-linux-gnu/bin/ld: misc/misc.o: warning: relocation against `stdout@@GLIBC_2.2.5' in read-only section `.text'
/home/autobuild/autobuild/instance-5/output-1/host/lib/gcc/x86_64-buildroot-linux-gnu/12.3.0/../../../../x86_64-buildroot-linux-gnu/bin/ld: log/log.o: relocation R_X86_64_PC32 against symbol `stdout@@GLIBC_2.2.5' can not be used when making a shared object; recompile with -fPIC
Fixes: de6415ad9c
- http://autobuild.buildroot.org/results/0349c6bfd66f5e50429e4a5cc07fb7abf2b07345
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 880066bad6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch fixes the following linking failure:
/home/buildroot/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/i586-buildroot-linux-musl/9.3.0/../../../../i586-buildroot-linux-musl/bin/ld: /home/buildroot/instance-0/output-1/host/i586-buildroot-linux-musl/sysroot/lib/libc.a(getopt.o): in function `getopt':
getopt.c:(.text.getopt+0x0): multiple definition of `getopt'; src/getopt.o:getopt.c:(.text+0x0): first defined here
/home/buildroot/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/i586-buildroot-linux-musl/9.3.0/../../../../i586-buildroot-linux-musl/bin/ld: /home/buildroot/instance-0/output-1/host/i586-buildroot-linux-musl/sysroot/lib/libc.a(getopt.o):(.data.optind+0x0): multiple definition of `optind'; src/getopt.o:(.data+0x0): first defined here
Fixes:
- http://autobuild.buildroot.net/results/d5b1b4e5e9d9c8eca5e75c345db4d1f3f0cd84ed
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 5a7c40bd1c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Our index.html page still points to git.buildroot.net as the Git
repository, and to the defunct gmane for the mailing list
activity. Fix these by pointing to Gitlab and lore respectively.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3e3bcd6338)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Builds with GCC 14 print the following error
> zip.h:726:10: error: conflicting types for 'memset'; have 'char *(char *, int, unsigned int)'
This is because with GCC 14, Zip incorrectly detects that the memset functions
exist. Which enables the ZMEM flag and declares its own version of memset.
This is because the ./unix/configure script attempts to compile a C file using
'memset' but it does not include the <string.h>. This was allowed in gnu89, but
in GCC 14 -Werror=implicit-function-declaration is enabled by default[1].
We forcefully set '-std=gnu89' so that Zip will compile everything against
gnu89, which suppresses the warning.
[1] https://gcc.gnu.org/gcc-14/porting_to.html#warnings-as-errors
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 29c6fe13d3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
opencv and qt handling can be dropped since switch to an active fork in
commit 456a739831 as they are only used
when examples are enabled resulting in the following warning:
CMake Warning:
Manually-specified variables were not used by the project:
BUILD_DOC
BUILD_DOCS
BUILD_EXAMPLE
BUILD_TEST
BUILD_TESTING
BUILD_TESTS
CMAKE_DISABLE_FIND_PACKAGE_OpenCV
CMAKE_DISABLE_FIND_PACKAGE_Qt5
While at it, also drop BUILD_EXAMPLES which is already passed by
pkg-cmake.mk
Fixes: 456a739831
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit fd64c544d3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2023-36054: lib/kadm5/kadm_rpc_xdr.c in MIT Kerberos 5 (aka krb5)
before 1.20.2 and 1.21.x before 1.21.1 frees an uninitialized pointer
- CVE-2023-39975: kdc/do_tgs_req.c in MIT Kerberos 5 (aka krb5) 1.21 before
1.21.2 has a double free that is reachable if an authenticated user can
trigger an authorization-data handling failure
Signed-off-by: André Zwing <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit dd1ea28b07)
[Peter: mark as security bump, add CVE details]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable -Werror to fix the following build failure raised at least since
bump to version 3.9.0 in commit e76d9868c9
and
https://github.com/zhaojh329/libuhttpd/commit/81db1fa371bc80f40c1bfe60010e7d64bdf30b46:
/home/autobuild/autobuild/instance-8/output-1/build/libuhttpd-3.14.1/src/file.c: In function '__serve_file':
/home/autobuild/autobuild/instance-8/output-1/build/libuhttpd-3.14.1/src/file.c:322:50: error: format '%llu' expects argument of type 'long long unsigned int', but argument 4 has type '__off_t' {aka 'long int'} [-Werror=format=]
322 | conn->send_header(conn, "Content-Range", "bytes */%" PRIu64, st->st_size);
| ^~~~~~~~~~~ ~~~~~~~~~~~
| |
| __off_t {aka long int}
In file included from /home/autobuild/autobuild/instance-8/output-1/build/libuhttpd-3.14.1/src/file.c:36:
/home/autobuild/autobuild/instance-8/output-1/per-package/libuhttpd/host/mips64el-buildroot-linux-uclibc/sysroot/usr/include/inttypes.h:91:41: note: format string is defined here
91 | # define PRIu64 __PRI64_PREFIX "u"
cc1: all warnings being treated as errors
Fixes: e76d9868c9
- http://autobuild.buildroot.org/results/46349a1409f9cff027b462456078284459e75511
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 5961b21918)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The rock5b_defconfig contained a
# BR2_LINUX_KERNEL_INTREE_DTS_NAME is not set
line. This caused check-dotconfig.py to throw a warning in the
buildroot CI, because the explicit unsetting of the parameter is not
taken on in the actual dotconfig, but instead the dotconfig will
contain the line 'BR2_LINUX_KERNEL_INTREE_DTS_NAME=""'.
This patch removes the parameter from the rock5b_defconfig. The
resulting dotconfig from the original rock5b_defconfig and the
rock5b_defconfig without the parameter is identical, but the
check-dotconfig.py does not throw a warning anymore.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 0f0660ad2d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Release notes: https://www.postgresql.org/docs/release/16.2/
The hash of the license file is updated due to a change in copyright
years:
-Portions Copyright (c) 1996-2023, PostgreSQL Global Development Group
+Portions Copyright (c) 1996-2024, PostgreSQL Global Development Group
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 360d2da3fa)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Buildroot commit f95069814b disabled the
build of test programs unconditionally without considering the option
BR2_PACKAGE_LIBDRM_INSTALL_TESTS.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 91848e73ae)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since version 2.1, LuaJIT follows a rolling-release scheme, which means
that any commit is as good as any other; LuaJIT uses the comitter's UNIX
timestamp as its semver patch level. It uses the git-attribute
export-subst for the .relver file that contains the %ct placeholder for
git-archive to expand it.
In c9dcd9e459 (package/luajit: bump to version 41fb94defa8f...), we
switched to such an upstream version. There was some confusion around
the handling of the git-attribute and where/when it is generated, and
the first revision of the patch used the git download method, so had to
use post-extract hooks to do the replacement, but the second iteration
kept retrieving the archive generated by github, which has the
replacement already done, but the post-extract hooks were not dropped
although now useless...
With the current code, it is easy to bump the LuaJit version and forget
to update the timestamp stored in the .relver file, which would override
the value that was generated on the github side.
Since the post-extract hook is useless, drop it.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Francois Perrad <fperrad@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 1bcb51517c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The upstream host, arago-project.org, has vanished, bringing down the
git repository with it.
Switch to another, github-hosted repository, that has the commit we're
interested in.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit b1977d933b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current version of docker-compose is un-vendorable, because the
dependencies it referenmces (directly or indirectly) are not available:
go: github.com/docker/compose/v2/cmd/compose imports
github.com/moby/buildkit/util/progress/progressui:
github.com/crazy-max/buildkit@v0.7.1-0.20240130133234-d9aa289bd124:
invalid version: unknown revision d9aa289bd124
And indeed, that commit does not exist in that repository. The v0.7.1
tag does exist, but there is not commit that matches the short hash
d9aa289bd124, or even the whole version string. Sigh...
There is no way anyone can vendor the version we currently package, and
all they and us can hope for is that we never lose s.b.o ever.
Bump the version. That one can be vendored. Well, at least it can
_still_ be vendored _now_...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 1b189f5491)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While bumping kodi, we figured out that the kodi-texturepacker and
kodi-jsonschemabuilder were both re-downloading the main Kodi tarball,
even though they contain:
KODI_JSONSCHEMABUILDER_DL_SUBDIR = kodi
KODI_TEXTUREPACKER_DL_SUBDIR = kodi
Both are host packages, and turns out that changing those variables to
HOST_ ones made the download sharing work.
Commit efa7712b09 ("package/pkg-generic:
host variant inherits target download settings") introduced
inheritance of host variables from target variables from a number of
variables, including DL_SUBDIR. But it missed the fact that earlier in
pkg-generic.mk, the following line was defined:
$(2)_DL_SUBDIR ?= $$($(2)_RAWNAME)
So, when this later code kicked in:
ifndef $(2)_DL_SUBDIR
ifdef $(3)_DL_SUBDIR
$(2)_DL_SUBDIR = $$($(3)_DL_SUBDIR)
endif
endif
In fact it never did anything because $(2)_DL_SUBDIR would never be
undefined. This commit fixes this issue by properly adjusting the
logic to inherit the value of the target variable when it exists, or
defaulting to $$($(2)_RAWNAME) otherwise.
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit a1c4d6c884)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Config.in comment was mentioning both "NPTL" and "threads" as
dependencies, while mentioning only the former is sufficient.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit dabd983c0d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When ImageMagick is selected, the "zbarimg" program is compiled and
installed on target. It allows to decode a QR code from an image file.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 84ad5c22d0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As part of the review process of the ivi-homescreen package, which
landed in commit 9d8497e79d, it was
deemed that the dependency on BR2_TOOLCHBAIN_HAS_THREAD_NPTL was not
needed, as it was implied by glibc. According to the commit log:
[yann.morin.1998@free.fr:
- propagate BR2_PACKAGE_HOST_FLUTTER_SDK_BIN_ARCH_SUPPORTS to comments
- drop NPTL, implied by glibc
- reorder dependencies in a more logical way
- reorder comments
- drop undefined BR2_PACKAGE_IVI_HOMESCREEN_HAS_CLIENT
- grammar ("for to change")
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
However, while the BR2_TOOLCHBAIN_HAS_THREAD_NPTL dependency was
removed from the BR2_PACKAGE_IVI_HOMESCREEN option definition, the
corresponding dependency in the Config.in comment was not
dropped. Let's bring things back in sync.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b9b072f83c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The following defconfig:
BR2_aarch64=y
BR2_cortex_a72=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_INIT_NONE=y
BR2_SYSTEM_BIN_SH_NONE=y
# BR2_PACKAGE_BUSYBOX is not set
BR2_PACKAGE_GSTREAMER1=y
BR2_PACKAGE_GST1_PLUGINS_BASE_LIB_OPENGL=y
BR2_PACKAGE_GST1_PLUGINS_GOOD=y
# BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_AVI is not set
# BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_ISOMP4 is not set
# BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_WAVPARSE is not set
BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_QMLGL=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_OPENGL_EGL=y
BR2_PACKAGE_MESA3D_OPENGL_ES=y
BR2_PACKAGE_QT5=y
BR2_PACKAGE_WAYLAND=y
# BR2_TARGET_ROOTFS_TAR is not set
fails to build in gst1-plugins-good, with:
build/gst1-plugins-good-1.22.9/ext/qt/meson.build:48:4: ERROR: Problem encountered: qt5 qmlglsink plugin is enabled, but qt specific tools were not found
This is due to qt5tools being missing. This commit adds this missing
dependency.
Signed-off-by: Charles Hardin <ckhardin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c107dd33e6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The lvm2 package now enables the required Kernel configuration. The
Kernel config fragment included in this test is no longer needed.
This commit removes it.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 9339343111)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
LVM2 has a hard dependency on the device-mapper presence in the Kernel.
This commit enables those mandatory Kernel configuration by defining
the _LINUX_CONFIG_FIXUPS macro. This will make sure the final system
image will end up in a working configuration.
This was suggested by Arnout in [1].
[1] https://lists.buildroot.org/pipermail/buildroot/2024-April/688776.html
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 419d39b261)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When building on hosts with libstdc++ without demangle support this error
shows up:
checking for __cxa_demangle in -lstdc++... no
configure: error: __cxa_demangle not found in libstdc++, use --disable-demangler to disable demangler support.
make[1]: *** [package/pkg-generic.mk:273: /home/giuliobenetti/br_reproduce/c2524c7580d97f7387ec22da62be71d77f2ed8ec/output/build/host-elfutils-0.189/.stamp_configured] Error 1
make: *** [Makefile:23: _all] Error 2
So let's disable demangler for host by default.
Fixes: still not showed by autobuilders. Reproduced on Ubuntu 22.04 with
Ubuntu APT g++ 11.4.0
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 5f2c9f882d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
pppd fails to start on a systems with buildroot 2024.02.x because of
missing pppd directory in /var/run. There are some logs hinting at this
issue:
Warning: couldn't open ppp database /var/run/pppd/pppd2.tdb
Can't create lock file /var/run/pppd/lock/LCK..ppp-tty-fifo1: No such file or directory
Can't create lock file /var/run/pppd/lock/LCK..ppp-tty-fifo1: No such file or directory
Can't create lock file /var/run/pppd/lock/LCK..ppp-tty-fifo1: No such file or directory
Can't create lock file /var/run/pppd/lock/LCK..ppp-tty-fifo1: No such file or directory
Can't create lock file /var/run/pppd/lock/LCK..ppp-tty-fifo1: No such file or directory
Can't create lock file /var/run/pppd/lock/LCK..ppp-tty-fifo1: No such file or directory
Can't create lock file /var/run/pppd/lock/LCK..ppp-tty-fifo1: No such file or directory
The issue has already been detected and fixed upstream (see [1]) and is
expected to be released on a v2.5.1, but this release seems to be stalled
for now (see [2]). Bump on current master, which currently reflects what
will likely be the 2.5.1.
[1] https://github.com/ppp-project/ppp/issues/419
[2] https://github.com/ppp-project/ppp/issues/460
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c1b04a3254)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
CVE-2024-24787: cmd/go: arbitrary code execution during build on darwin
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
openocd is not compatible with libgpiod2 resulting in the following
build failure since the addition of libgpiod2 in commit
57391fad2e:
src/jtag/drivers/linuxgpiod.c: In function 'helper_get_line':
src/jtag/drivers/linuxgpiod.c:283:19: error: 'GPIOD_LINE_REQUEST_DIRECTION_INPUT' undeclared (first use in this function); did you mean 'GPIOD_LINE_DIRECTION_INPUT'?
283 | int dir = GPIOD_LINE_REQUEST_DIRECTION_INPUT, flags = 0, val = 0, retval;
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| GPIOD_LINE_DIRECTION_INPUT
Fixes: 57391fad2e
- http://autobuild.buildroot.org/results/7195e8b76350f26ab3b963702d88b254512e6928
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit be3252fe01)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following static build failure raised since bump to version
version 6.0.14 in commit ce17f93e82 and
https://github.com/OISF/suricata/commit/31ba4fd1522dd0d7f933767b9205c67a4e726fe5:
configure:22378: checking for pcap_open_dead in -lpcap
configure:22407: /home/buildroot/autobuild/run/instance-3/output-1/host/bin/x86_64-linux-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -static -std=c11 -march=native -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static -rdynamic conftest.c -lpcap -ljansson -lpthread -lyaml -lpcre -latomic -lz >&5
/home/buildroot/autobuild/run/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-buildroot-linux-musl/12.3.0/../../../../x86_64-buildroot-linux-musl/bin/ld: /home/buildroot/autobuild/run/instance-3/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/lib/../lib64/libpcap.a(pcap-linux.o): in function `nl80211_init':
pcap-linux.c:(.text+0xc34): undefined reference to `nl_socket_alloc'
[...]
checking for pcap_open_dead in -lpcap... no
Fixes: ce17f93e82
- http://autobuild.buildroot.org/results/9e25c2508bd4100d2d1d3180e79060d762361213
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a3ee47ef22)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The CPIO filesystem generated by TestPerlDBDmysql is too large, and
doesn't fit as an initramfs in the 256MB of RAM available in the
versatilepb machine. This causes a failure while running a basic
test "perl -MDBI -e '1'" since "/usr/lib/perl5", and many files
being missing from the root filesystem, ultimately causing the test
to fail.
Can't locate DBI.pm in @INC (you may need to install the DBI module)
(@INC entries checked: /usr/lib/perl5/site_perl/5.38.2/arm-linux
/usr/lib/perl5/site_perl/5.38.2 /usr/lib/perl5/5.38.2/arm-linux
/usr/lib/perl5/5.38.2).
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6735654506
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 8937cd065c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
PIE will be set by buildroot if the user wants it so set
{COMPILE,LINK}_PIE to an empty value to fix the following build failure
raised since the addition of the package in commit
02c818bc5c:
/home/buildroot/autobuild/run/instance-3/output-1/host/bin/m68k-linux-gcc -W -Wall -Waggregate-return -Wcast-align -Wconversion -Wdisabled-optimization -Wmissing-declarations -Wmissing-format-attribute -Wmissing-noreturn -Wmissing-prototypes -Wpointer-arith -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -std=gnu99 -DLIBEXECDIR=\"/usr/lib\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wl,-z,relro -Wl,-stats -fPIE -pie -Wl,-z,now utempter.c -o utempter
[...]
/home/buildroot/autobuild/run/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/m68k-buildroot-linux-uclibc/12.3.0/../../../../m68k-buildroot-linux-uclibc/bin/ld: /home/buildroot/autobuild/run/instance-3/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/Scrt1.o: in function `lib_main':
(.text+0x4): undefined reference to `__shared_flat_add_library'
Fixes: 02c818bc5c
- http://autobuild.buildroot.org/results/3a5581fd4edf56bbdc48ab111a2351fc70f1c703
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 36b06928c8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
And enable BR2_DOWNLOAD_FORCE_CHECK_HASHES.
Generated by utils/add-custom-hashes, with the (redundant)
linux-headers.hash replaced by a symlink.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 56ce35d235)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following error/warnings with kconfig from linux-6.9-rc5:
package/x11r7/Config.in:14: syntax error
package/x11r7/Config.in:14:warning: ignoring unsupported character '/'
package/x11r7/Config.in:14:warning: ignoring unsupported character '/'
package/x11r7/Config.in:14:warning: ignoring unsupported character '/'
package/x11r7/Config.in:14:warning: ignoring unsupported character '.'
package/x11r7/Config.in:14: invalid statement
[...]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a214c4568b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following error/warnings with kconfig from linux-6.9-rc5:
package/python-pydal/Config.in:2: syntax error
package/python-pydal/Config.in:2: invalid statement
package/python-pydal/Config.in:3: invalid statement
[...]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 9f8d3f47d7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following error/warnings with kconfig from linux-6.9-rc5:
package/dovecot/Config.in:36: syntax error
package/dovecot/Config.in:36:warning: ignoring unsupported character '/'
package/dovecot/Config.in:36:warning: ignoring unsupported character '/'
package/dovecot/Config.in:36:warning: ignoring unsupported character '.'
package/dovecot/Config.in:36: invalid statement
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ff70f9ee4c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following error/warnings with kconfig from linux-6.9-rc5:
package/cmocka/Config.in:2: syntax error
package/cmocka/Config.in:2: invalid statement
package/cmocka/Config.in:3: invalid statement
package/cmocka/Config.in:4: invalid statement
[...]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 4abda655e6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following error/warnings with kconfig from linux-6.9-rc5:
boot/barebox/Config.in:79: syntax error
boot/barebox/Config.in:79:warning: ignoring unsupported character '/'
boot/barebox/Config.in:79:warning: ignoring unsupported character '/'
boot/barebox/Config.in:79:warning: ignoring unsupported character '/'
boot/barebox/Config.in:79:warning: ignoring unsupported character '.'
boot/barebox/Config.in:79: invalid statement
boot/barebox/Config.in:93: syntax error
boot/barebox/Config.in:93:warning: ignoring unsupported character '/'
boot/barebox/Config.in:93:warning: ignoring unsupported character '/'
boot/barebox/Config.in:93:warning: ignoring unsupported character '/'
boot/barebox/Config.in:93:warning: ignoring unsupported character '.'
boot/barebox/Config.in:93: invalid statement
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit e86aec1663)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With the bump to version 8.1.1, the patch that disabled the compilation
of the fp-bench test is no longer applicable, even though the package
compilation process does not report any errors in applying the patch
itself. The new patch does not disable the test by default but only if
the file fenv.h is not missing, with the hope that this approach will be
considered acceptable by the maintainer and merged upstream.
The patch is an adaptation of the one sent upstream.
Link: https://lists.nongnu.org/archive/html/qemu-devel/2021-03/msg00492.html
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 2bb0c57ca2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The http URL redirects to https. This commit updates this URL to
directly use https.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 2aa3a23bbe)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Wireless regulatory database lists the allowed radio frequencies for
each local jurisdiction. Since linux-4.15 the kernel supports loading
the files regulatory.db/regulatory.db.p7s directly from the
/lib/firmware directory. Currently this package is not enabled and
kernel complains with the following message on every boot:
"""
platform regulatory.0: Direct firmware load for regulatory.db failed
with error -2
cfg80211: failed to load regulatory.db
"""
Add wireless regulatory database package to fix the issue.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 16e9f51490)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the toolchain Bootlin update to 2023.11-1 [1], the arm Linux
kernel build is broken with binutils >= 2.41 with:
arch/arm/mm/proc-v7.S: Assembler messages:
arch/arm/mm/proc-v7.S:640: Error: junk at end of line, first unrecognized character is `#'
A similar issue has already be fixed for qemu m68k [2].
Bump to the latest kernel 4.19 that already include the backport
of 790756c7e022 ("ARM: 8933/1: replace Sun/Solaris style flag on section directive")
[1] 7e0e6e3b86
[2] a1ce9474e4
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6703222383
Signed-off-by: Romain Naour <romain.naour@smile.fr>
(cherry picked from commit 7e126bd38d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
GCC14 now treats implicit int types as error so when check() from
check-lxdialog.sh is called to check whether we can link against ncurses
it will fail silently and the help text indicating to install ncurses is
printed.
However, this is not due to missing ncurses but once the stderr redirect
to /dev/null is removed we can see the root cause:
<stdin>:2:1: error: return type defaults to ‘int’ [-Wimplicit-int]
So, in order for menuconfig to work with GCC14 lets just specify the
return type of main() as int.
Npte that the upstream kconfig in the linux kernel source tree no longer
carries or uses the check-lxdialog.sh script since commit 1c5af5cf9308
(kconfig: refactor ncurses package checks for building mconf and nconf),
so there is no commit we can backport to our kconfig copy.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Tested-by: Petr Vorel <petr.vorel@gmail.com>
[yann.morin.1998@free.fr: add note about upstream kernel]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit a6210d28db)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2021-3575: A heap-based buffer overflow was found in openjpeg in
color.c:379:42 in sycc420_to_rgb when decompressing a crafted .j2k file. An
attacker could use this to execute arbitrary code with the permissions of
the application compiled against openjpeg.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit ff36bc68cd)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To ensure the correct prefix is used in the generated tinycbor.pc instead of
/usr/local:
>>> tinycbor 0.6.0 Building
..
sed > tinycbor.pc < tinycbor.pc.in \
-e 's,@prefix@,/usr/local,' \
-e 's,@exec_prefix@,/usr/local,' \
-e 's,@libdir@,/usr/local/lib,' \
-e 's,@includedir@,/usr/local/include,' \
-e 's,@version@,0.6.0,'
>>> tinycbor 0.6.0 Installing to staging directory
..
install -m 644 tinycbor.pc /path/to/buildroot/output/host/aarch64-buildroot-linux-gnu/sysroot/usr/lib/pkgconfig/tinycbor.pc
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit b059e08420)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In _imagingcms.c in Pillow before 10.3.0, a buffer overflow exists because
strcpy is used instead of strncpy.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit dfaa34ddd3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
/dev/shm is a world-writable directory, like /tmp, and should also
have the sticky bit set. Without this, any user can delete and
replace another user's files in /dev/shm.
This bug has been present since /dev/shm was added to the skeleton
/etc/fstab, but appears to have been fixed for systems using systemd
by commit 76fc9275f1 "system: separate sysv and systemd parts of the
skeleton" which went into Buildroot 2017.08.
Signed-off-by: Ben Hutchings <ben.hutchings@mind.be>
Fixes: 22fde22e35
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 0b2967e158)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
TestATFVexpress is using vexpress_aemv8a_juno as as u-boot defconfig
but the Buildroot defconfig of this board was removed in 2022.11 [1]
Since both TestATFVexpress and TestATFAllwinner are now using mainline
ATF, we don't really need several ATF test anymore. Initially [2],
several runtime test were added to test ATF/U-Boot combinations when
ATF was provided by a vendor: vexpress (mainline), Allwinner and
Marvell.
Keep TestATFAllwinner as ATF mainline test.
[1] 347c108738
[2] 8cf3ce04e9
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 107bcd536d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
u-boot-2021.04 seems to be broken when pylibfdt support is enabled
and the latest python3/setuptools are used.
Since the TestATFAllwinner is using bananapi_m64 as u-boot defconfig
but the Buildroot defconfig of this board was removed in 2022.11 [1]
update TestATFAllwinner to use a newer BSP. Use the one provided
by orangepi_zero_plus2_defconfig.
[1] daf3c6661f
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6477656317 (TestATFAllwinner)
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit eb16148ddd)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the toolchain Bootlin update to 2023.11-1 [1], the arm Linux
kernel build is broken with binutils >= 2.41 with:
arch/arm/mm/proc-v7.S: Assembler messages:
arch/arm/mm/proc-v7.S:640: Error: junk at end of line, first unrecognized character is `#'
A similar issue has already be fixed for qemu m68k [2].
Bump to the latest kernel 4.19 that already include the backport
of 790756c7e022 ("ARM: 8933/1: replace Sun/Solaris style flag on section directive")
[1] 7e0e6e3b86
[2] a1ce9474e4
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6414160106 (TestFileCapabilities)
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 07ef00df9b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
--with-xdebug is not recognized since the addition of the package in
commit 7b7dffd098:
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --disable-dependency-tracking, --enable-ipv6, --disable-nls, --with-xdebug
Fixes: 7b7dffd098
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 98ee9f8b49)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
zlib is an optional dependency dependency (enabled by default) since the
addition of the package in commit
8aaa7ecbce
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 05f5e5b6f8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Although -Wmain-return-type is not considered as error (unlike
-Wimplicit-int), but just a warning, let's fix it for the future.
<stdin>:1:1: warning: return type of 'main' is not 'int' [-Wmain-return-type]
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3c9d067590)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with gcc >= 13:
In file included from ../src/basic/macro.h:446,
from ../src/basic/alloc-util.h:10,
from ../src/shared/install.c:12:
../src/shared/install.c: In function ‘install_changes_dump’:
../src/shared/install.c:444:64: error: ‘%s’ directive argument is null [-Werror=format-overflow=]
444 | err = log_error_errno(changes[i].type, "Failed to %s unit, unit %s does not exist.",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/e0d6b7d41fefec539a17a3ef5c89c192ce29fd04
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 066c3e67d7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix a potential denial of service caused by accepting arbitrary
length primes as potential elliptic curve parameters in ASN.1
encodings. With very large inputs the primality verification
can become computationally expensive. Now any prime field larger
than 1024 bits is rejected immediately.
https://botan.randombit.net/news.html#version-3-3-0-2024-02-20
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 2fcc74594c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Vulnerabilities
- [High] CVE-2024-0901 Potential denial of service and out of bounds
read. Affects TLS 1.3 on the server side when accepting a connection
from a malicious TLS 1.3 client. If using TLS 1.3 on the server side
it is recommended to update the version of wolfSSL used.
- [Med] CVE-2024-1545 Fault Injection vulnerability in
RsaPrivateDecryption function that potentially allows an attacker
that has access to the same system with a victims process to perform
a Rowhammer fault injection.
- [Med] Fault injection attack with EdDSA signature operations. This
affects ed25519 sign operations where the system could be susceptible
to Rowhammer attacks.
No official tarball provided so switch to github and set autoreconf
https://github.com/wolfSSL/wolfssl/releases/tag/v5.7.0-stable
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 3a2891621c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The LIBS environment variable is ignored since bump to version 1.0.1 and
switch to cmake build system in commit
203725a46b resulting in the following
build failure:
/home/buildroot/autobuild/run/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-musleabihf/12.3.0/../../../../arm-buildroot-linux-musleabihf/bin/ld: CMakeFiles/clamonacc.dir/inotif/hash.c.o: in function `onas_ht_add_hierarchy':
hash.c:(.text+0xa84): undefined reference to `fts_open'
Fixes: 203725a46b
- http://autobuild.buildroot.org/results/fe71ab29d02caeed609f1a181fccbd46b6feff65
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit b526b2aa15)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
QorIQ processors family also includes LS Series wich are based on aarch64
Signed-off-by: David Gouarin <dgouarin@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 2656ca8912)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Only the 32bit ARM blob provides the framebuffer backend. This is
apparently independent of which imx8 derivate is used, so changed
the condition for the config option accordingly.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 47a02a5afc)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
dmraid is a very old package from 2010 with an awkward configure script
which doesn't honor CFLAGS:
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 '
[...]
## ----------------- ##
## Output variables. ##
## ----------------- ##
AWK='gawk'
CC='/home/autobuild/autobuild/instance-3/output-1/host/bin/sh4a-buildroot-linux-musl-gcc'
CFLAGS='-O2'
resulting in the following build failure with musl >= 1.2.4 and
https://github.com/bminor/musl/commit/25e6fee27f4a293728dd15b659170e7b9c7db9bc
because _LARGEFILE64_SOURCE is not set:
/home/autobuild/autobuild/instance-3/output-1/host/lib/gcc/sh4a-buildroot-linux-musl/12.3.0/../../../../sh4a-buildroot-linux-musl/bin/ld: misc/file.o: in function `rw_file':
file.c:(.text+0x150): undefined reference to `lseek64'
To fix this issue, pass TARGET_CONFIGURE_OPTS through DMRAID_MAKE_OPTS
Fixes:
- http://autobuild.buildroot.org/results/5c7c82959ce92db908d3ca20e2c1137509c2f981
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit de6415ad9c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
sortGrid()'s handling of git hashes and other large hex numbers
has been inconsistent, they can be detected as strings or numbers
depending on what type of character they start with.
This patch fixes the behaviour by using a regex to capture everything
that looks like a big hex number and treat it as a string.
This means when you sort by current version ascending all the version
strings with big hex numbers should show up first, sorted 0-9,a-f.
First we check for a string length >= 39, and then apply a regex
to return an array with every char from that string that matched
the regex. If the length of this array is still >= 39 we can assume
we are looking at something containing a git hash.
The reason why the length is defined as ">= 39" and not "40" or
"39 or 40" is twofold:
Firstly, 39 was chosen as a minimum to match stuff with 39 char git
hashes, like the rockchip-mali package.
Secondly, there is no max because we actually want to catch not
just explicitly git hashes, but any verson string with big gnarly
hex numbers in it.
Stuff like: "1.4.2-168-ged3039cdbeeb28fc0011c3585d8f7dfb91038292"
Why? Well, the idea is less about git hashes and sorting
and more about grouping similarly formatted version strings.
It would be impossble (or at least annoyingly complicated) and of
dubious utility to get a real sequential sort out of the
current version column, so the attempt here is to at the very
least collect all the similarly formatted things together.
This isn't perfect, but it's a (arguably) more useful sorted
output than before.
A demo is available here:
https://sen-h.codeberg.page/pkg-stats-demos/@pages/fix-improve-git-hash-sorting.html
Signed-off-by: Sen Hastings <sen@hastings.org>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit ce7363524c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Because the div_class variable was not reassigned a value,
cells in the latest_version column were still being assigned
hash_file classes and so were being picked up as elements in
the hash_file sort. This lead to execessive grid gap elements
stacking up and creating huge blank spaces at the top of the page.
This is very noticable on pages with a large number of packages,
like the ones the autobuilder creates.
original behaviour(click the "Hash file" column label twice):
http://autobuild.buildroot.org/stats/master.html
demo of fixed behaviour:
https://sen-h.codeberg.page/pkg-stats-demos/@pages/fix-bug-when-sorting-by-hash-file.html
Signed-off-by: Sen Hastings <sen@hastings.org>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 6e3d79f52e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following x86 build failure raised since bump to version 1.8.0
in commit 81802e263a and
https://gitlab.eclipse.org/eclipse/tcf/tcf.agent/-/commit/8df5540c53b862d516ac25f908c2fff4a547b4a6:
/home/buildroot/autobuild/run/instance-1/output-1/build/tcf-agent-1.8.0/agent/tcf/services/tcf_elf.c: In function 'unpack_elf_symbol_info':
/home/buildroot/autobuild/run/instance-1/output-1/build/tcf-agent-1.8.0/agent/tcf/services/tcf_elf.c:2079:27: error: 'STT_ARM_16BIT' undeclared (first use in this function)
2079 | if (info->type == STT_ARM_16BIT) {
| ^~~~~~~~~~~~~
/home/buildroot/autobuild/run/instance-1/output-1/build/tcf-agent-1.8.0/agent/tcf/services/tcf_elf.c:2079:27: note: each undeclared identifier is reported only once for each function it appears in
/home/buildroot/autobuild/run/instance-1/output-1/build/tcf-agent-1.8.0/agent/tcf/services/tcf_elf.c: In function 'create_symbol_addr_search_index':
/home/buildroot/autobuild/run/instance-1/output-1/build/tcf-agent-1.8.0/agent/tcf/services/tcf_elf.c:2228:78: error: 'STT_ARM_16BIT' undeclared (first use in this function)
2228 | if (type == STT_FUNC || type == STT_ARM_TFUNC || type == STT_ARM_16BIT) {
| ^~~~~~~~~~~~~
Fixes: 81802e263a
- http://autobuild.buildroot.org/results/8388acf59689ed7e621bdf158483e3df1cf9bef7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit dd595d3b06)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current version is more than 2 years old. Update to the latest.
This fixes runtime issues with the newer kernel used in our defconfigs
since commit 13ba668a2d.
License file changed name from LICENCE to LICENSE but is otherwise
unchanged.
There is a new directory "synaptics", install this one as well.
A lot of the files are symlinks. "install" creates copies for these,
which consumes a lot of unnecessary space. Instead of individually
restoring the links, using `cp --remove-destination --no-dereference`
and `chmod` instead of `install`.
Fixes: 13ba668a2d
Signed-off-by: Nisarg Jhaveri <nisargjhaveri@gmail.com>
[Arnout: correct license file name]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit ab24100537)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
According to https://www.sourceware.org/gdb/:
This is a minor corrective release over GDB 14.1, fixing the following issues:
PR symtab/31112 (DLL export forwarding is broken)
PR c++/31128 (gdb crashes when trying to print a global variable stub without a running inferior)
PR tdep/31254 ([gdb/tdep, arm] FAIL: gdb.threads/staticthreads.exp: up 10)
PR gdb/31256 (Crash with basic 'list .')
PR python/31366 (Frame.static_link() segfaults)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit bfefed17a9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_PACKAGE_TIFF_JBIG did actually not do anything, as no explicit
--enable-jbig was passed to configure and there is no libjbig in Buildroot,
so drop it and instead explicitly disable jbig support.
Also add --disable-jbig for the host build, which was missed when host
support was added in commit 91b16fbbf9 (tiff: add host variant).
As the TIFF_JBIG option was a noop, do not add legacy handling for it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit a7d491b0ff)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We do not have liblerc in Buildroot and it may cause linking issues for
host-tiff on build hosts with liblerc:
libtool: link: /usr/bin/gcc -O2
-I/home/dragon/src/ft/ftcommunity-TXT/output/build/rootfs/per-package/host-tiff/host/include
-Wall -W -Wl,-rpath
-Wl,/home/dragon/src/ft/ftcommunity-TXT/output/build/rootfs/per-package/host-tiff/host/lib
-o tiffcp tiffcp.o
-L/home/dragon/src/ft/ftcommunity-TXT/output/build/rootfs/per-package/host-tiff/host/lib
../libtiff/.libs/libtiff.so ../port/.libs/libport.a -lLerc -ljbig -lm
-Wl,-rpath
-Wl,/home/dragon/src/ft/ftcommunity-TXT/output/build/rootfs/build/host-tiff-4.6.0/libtiff/.libs
-Wl,-rpath
-Wl,/home/dragon/src/ft/ftcommunity-TXT/output/build/rootfs/per-package/host-tiff/host/lib
/usr/bin/ld: ../libtiff/.libs/libtiff.so: undefined reference to
`deflateInit_'
/usr/bin/ld: ../libtiff/.libs/libtiff.so: undefined reference to `deflate'
/usr/bin/ld: ../libtiff/.libs/libtiff.so: undefined reference to
`deflateEnd'
/usr/bin/ld: ../libtiff/.libs/libtiff.so: undefined reference to `inflate'
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit a4011ec1e1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No longer active in Buildroot. Keeping my name in the list sets the wrong
expectation regarding package updates or support.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 1a01554027)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix a typo in the dependencies, and switch the type to 'exec'.
This ensures that the psplash-systemd service will find the
FIFO created by psplash.
Change the psplash-systemd dependency to BindsTo, so stopping
psplash itself will also end this service and free resources.
psplash-start service need to start early, otherwise it might try
to compete/take away the framebuffer from the final graphical
stack. Order it before sysinit.target.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 087115b96a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Run script with 'errexit' bash option to detect any errors from
subcommands.
It will fix situation where 'ddr_fw.bin' was missing but successfull
build created broken boot image. Post image script report this by:
cat: /home/user/buildroot/output/images/ddr_fw.bin: No such file or directory
and build finish with success.
Signed-off-by: Wojciech Nizinski <wojciech.nizinski@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 4a1bcbe17e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_PACKAGE_LIBDRM_INTEL was dependent on BR2_i386
or BR2_x86_64, which made sense for integrated GPUs.
This is no longer valid with discrete GPUs so remove
this dependency to allow building on other CPU
architectures.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 02e30af0d0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The trace-cmd runtime test has a typo and fails with output:
Traceback (most recent call last):
File "/build/buildroot/support/testing/tests/package/test_trace_cmd.py", line 53, in test_run
self.assertEquals(exit_code, 0)
^^^^^^^^^^^^^^^^^
AttributeError: 'TestTraceCmd' object has no attribute 'assertEquals'. Did you mean: 'assertEqual'?
The issue can be reproduced with the command:
support/testing/run-tests \
-d dl -o output_test \
tests.package.test_trace_cmd
This commit fixes the issue by removing the extra 's'.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 2f507f1da5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The hash files do not use trailing backslash \ to continue lines, so
we don't want them to be interpreted thusly, so we use 'read -r'
(SC2162).
The h_file is used twice in the same loop, once for reading from it,
and once just to print it, so there is no conflict (SC2094).
Integrer variables need not be quoted (SC2086). In any case, should
there be an actual issue and they be set empty, that would cause a
runtime issue, wether they be quoted or not.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 9cb421c16f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
the user tables do not use trailing backslash \ to continue lines,
so we don't want them to be interpreted thusly, so we use 'read -r'
(SC2162).
Integer variables need not be quoted (SC2086). In any case, should
there be an actual issue and they be set empty, that would cause a
runtime issue, wether they be quoted or not.
The binary -o and -a ar perfectly defined in bash's test (SC2166).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 01b3053cec)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 41ea61d59c (support/scripts/mkusers: allow option for system
uid/gid) confused GID and UID variables: the GID limits were used to
create UIDs.
Fix that.
Note that this fixes a shellcheck error; although there are many more
shellcheck errors, these fixes are semantically a bug that need to be
fixed separately from the coding style issues reported by shellcheck.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Norbert Lange <nolange79@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit ebbcf5a0a7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Updates containerd to v1.7.14.
Highlights
Fix various timing issues with docker pusher
Register imagePullThroughput and count with MiB
Move high volume event logs to Trace level
Container Runtime Interface (CRI)
Handle pod transition states gracefully while listing pod stats
Runtime
Update runc-shim to process exec exits before init
https://github.com/containerd/containerd/releases/tag/1.7.14
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 2fa0f383b6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop patch that is included in this release. Drop autoreconf that was
introduced for this patch.
Fixes the following security issues:
* CVE-2024-2004
* CVE-2024-2379
* CVE-2024-2398
* CVE-2024-2466
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit fbeec56312)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update to the latest major release of docker-engine.
Fixes CVE-2024-29018: potential data exfiltration from 'internal'
networks via authoritative DNS servers. Do not forward requests to
external DNS servers for a container that is only connected to an
'internal' network.
https://github.com/moby/moby/releases/tag/v26.0.0
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 1c178b6892)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
zic needs CC defined since version bump to 2024a, and upstream commit
c3ebd8e98846 (make Makefile more compatible with POSIX).
Use HOST_CONFIGURE_OPTS which contains the appropriate host CC setting,
as well as our host CFLAGS and LDFLAGS.
Fixes:
c99 -O1 -c -o zic.o zic.c
make[2]: c99: No such file or directory
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr: reword commit log, refer to upstream commit]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 9139159d39)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 32934b526b (utils/checkpackagelib: check for Upstream trailers)
introduced a new python module to check Upstream tags in patch files. In
doing so, it introduced a flake8 coding style issue. That was not caught
when applying the change, and neither was it caught by our daily checks,
because the .checkpackagefile was regenerated right just in the next
commit, to apply ignore patterns to existing patch files.
It is a bit sad that one of our checks does not itself passes all our
checks...
Fix that trivial issue now.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 81bb14a935)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we pass BR2_ROOTFS_POST_SCRIPT_ARGS to each of the scripts in
BR2_ROOTFS_PRE_BUILD_SCRIPT, but the option is not exposed in menuconfig
when only pre-build scripts are used.
Add the pre-build scripts to the condition exposing the extra args
option.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 96b3295ca1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
David's e-mail is bouncing:
<david.bachelart@bbright.com>: host aspmx.l.google.com[2a00:1450:400c:c0c::1a]
said: 550-5.1.1 The email account that you tried to reach does not exist.
Please try 550-5.1.1 double-checking the recipient's email address for
typos or 550-5.1.1 unnecessary spaces. For more information, go to 550
5.1.1 https://support.google.com/mail/?p=NoSuchUser
n19-20020a05600c4f9300b00414111d4396si2497070wmq.117 - gsmtp (in reply to
RCPT TO command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit e8fcd9876d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit ebe5d9edfe ("boot, package,
support, toolchain: switch to 2 spaces for the hash file"), all hash
files were migrated to use 2 spaces as the separator.
However, in the googlefontdirectory hash file, a command is present in
a comment to indicate how to generate the part of the hash file that
provides the list of license file hashes. This command was not updated
as part of ebe5d9edfe, so it still emits
a result in which a single space is used a separator between the hash
type (sha256) and the hash value.
This commit fixes that by using a 2-space separator.
Signed-off-by: Christian Hitz <christian.hitz@bbv.ch>
[Thomas: extracted from
https://patchwork.ozlabs.org/project/buildroot/patch/20240228145013.411919-2-christian@klarinett.li/
into a separate patch]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit f139aab6fe)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go1.21.9 (released 2024-04-03) includes a security fix to the net/http
package, as well as bug fixes to the linker, and the go/types and net/http
packages.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 24e996d14d (package/xvisor: fix build without python interpreter)
added a dependency on host-python3 for the d2c.py script, but this script
does not use any non-standard python modules so we can instead use
BR2_PYTHON3_HOST_DEPENDENCY to only build host-python3 if the build host
does not have python3.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 7f08dc612c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 9496ff57e5 (package/openssh: bump to version 9.7p1) dropped
0001-better-detection-of-broken-fzero-call-used-regs.patch but forgot to
drop the autoreconf. Do that now.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 7a480207fd)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Busybox tc fails to build with kernel >= 6.8
For details see https://bugs.busybox.net/show_bug.cgi?id=15934
In addition, tc is a very rarely used tool, so not something that you
expect to be available in busybox by default.
Therefore, remove it from the default config.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 44c221c856)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The bitcoin Buildroot package has always disabled the wallet support.
This commit adds a config option to enable this support. This allows the
bitcoin-cli command to create wallets, generate addresses and send an
amount to a given address.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 958085d5f6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 6ea2a27f90 forgot to add -lucontext
to LIBS resulting in the following build failure with zeromq:
/home/buildroot/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/i586-buildroot-linux-musl/9.3.0/../../../../i586-buildroot-linux-musl/bin/ld: /home/buildroot/instance-0/output-1/host/i586-buildroot-linux-musl/sysroot/usr/lib32/libunwind.so.8: undefined reference to `setcontext'
Fixes: 6ea2a27f90
- http://autobuild.buildroot.org/results/893defe1588b2ca03c115b59b47be3f4aed438fb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 766c1613ae)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
GMP does not build if the host gcc is v4.9 due to the following error
gen-sieve.c: In function 'setmask':
gen-sieve.c:99:3: error: 'for' loop initial declarations are only allowed in C99 or C11 mode
for (unsigned i = 0; i < 2 * a * b; ++i)
^
gen-sieve.c:99:3: note: use option -std=c99, -std=gnu99, -std=c11 or -std=gnu11 to compile your code
The gen-sieve utility was added in GMP v6.3.0. It is built using
CC_FOR_BUILD (host compiler) during cross compilation as it generates
build files. Autoconf does not have a macro for add -std=c99 to
CC_FOR_BUILD, so it must be set manually. For the target, it is set
correctly thanks to the AC_PROG_CC_C99 macro.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 9553dc9a55)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Set default editor to /bin/vi to fix the following build failure when no
editor is found on host:
configure:40833: checking for vim
configure:40862: result: no
configure:40833: checking for vi
configure:40862: result: no
configure:40833: checking for emacs
configure:40862: result: no
configure:40833: checking for nano
configure:40862: result: no
configure:40833: checking for pico
configure:40862: result: no
configure:40833: checking for edit
configure:40862: result: no
configure:40874: error:
Failed to find a text file editor. CVS cannot be compiled
without a default log message editor. Searched for
`vim vi emacs nano pico edit'. Try `configure --with-editor'.
While at it, drop CVS_CONFIGURE_ARGS variable for simplicity
Fixes:
- http://autobuild.buildroot.org/results/5b8a747698bc2e64eb1f001e87577e86e4cb8d14
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 1455d5241b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised since bump of libressl to version
3.5.2 in commit 8b216927db:
red-stream.cpp: In function 'RedStreamSslStatus red_stream_ssl_accept(RedStream*)':
red-stream.cpp:526:22: error: invalid use of incomplete type 'SSL' {aka 'struct ssl_st'}
526 | stream->priv->ssl->s3->flags |= SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS;
| ^~
In file included from /home/buildroot/autobuild/instance-1/output-1/host/i686-buildroot-linux-gnu/sysroot/usr/include/openssl/err.h:120,
from red-stream.cpp:33:
/home/buildroot/autobuild/instance-1/output-1/host/i686-buildroot-linux-gnu/sysroot/usr/include/openssl/ossl_typ.h:173:16: note: forward declaration of 'SSL' {aka 'struct ssl_st'}
173 | typedef struct ssl_st SSL;
| ^~~~~~
Fixes:
- http://autobuild.buildroot.org/results/273eadf9e49af55e0932a8293ca65762fb43114f
- http://autobuild.buildroot.org/results/97601f321efc532de0c2ea6aa618ce11fad9e851
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 4e5ea31630)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enable DES in openssl to avoid the following build failure raised since
commit a83d41867c:
In file included from /home/buildroot/autobuild/run/instance-2/output-1/build/mariadb-10.11.6/libmysqld/../sql/mysqld.cc:50,
from /home/buildroot/autobuild/run/instance-2/output-1/build/mariadb-10.11.6/libmysqld/lib_sql.cc:34:
/home/buildroot/autobuild/run/instance-2/output-1/build/mariadb-10.11.6/libmysqld/../sql/des_key_file.h:26:3: error: 'DES_cblock' does not name a type
26 | DES_cblock key1, key2, key3;
| ^~~~~~~~~~
/home/buildroot/autobuild/run/instance-2/output-1/build/mariadb-10.11.6/libmysqld/../sql/des_key_file.h:31:3: error: 'DES_key_schedule' does not name a type; did you mean 'st_des_keyschedule'?
31 | DES_key_schedule ks1, ks2, ks3;
| ^~~~~~~~~~~~~~~~
| st_des_keyschedule
Fixes: a83d41867c
- http://autobuild.buildroot.org/results/bd067de9c2699dc9628c00b929a01890b14d53c1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 8b3497f3ab)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
btrfs doesn't depend on btrfs-progs but on headers >= 4.12 since bump to
version 24.0.2 in commit 314f62eda3 and
https://github.com/moby/moby/commit/3208dcabdc8997340b255f5b880fef4e3f54580d
resulting in the following build failure:
daemon/graphdriver/btrfs/btrfs.go:13:6: error: #error "Headers from kernel >= 4.12 are required to build with Btrfs support."
#error "Headers from kernel >= 4.12 are required to build with Btrfs support."
^~~~~
daemon/graphdriver/btrfs/btrfs.go:14:6: error: #error "HINT: Set 'DOCKER_BUILDTAGS=exclude_graphdriver_btrfs' to build without Btrfs."
#error "HINT: Set 'DOCKER_BUILDTAGS=exclude_graphdriver_btrfs' to build without Btrfs."
^~~~~
daemon/graphdriver/btrfs/btrfs.go:18:10: fatal error: linux/btrfs_tree.h: No such file or directory
#include <linux/btrfs_tree.h>
^~~~~~~~~~~~~~~~~~~~
Fixes: 314f62eda3
- http://autobuild.buildroot.org/results/7d07eba37149d341dc86f9742bd166de874dcd5e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit e30b38f1c5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we grab the per-year CVE feeds, in two passes: first, we grab
the meta files, and check whether something has changed since last we
downloaded it; second, we download the feed proper, unless the meta file
has not changed, in which case we use the locally cached feed.
However, it has appeared that the FKIE releases no longer provide the
meta files, which means that (once again), our daily reports are broken.
The obvious fix would be to drop the use of the meta file, and always
and unconditionally download the feeds. That's relatively trivial to do,
but the feeds are relatively big (even as xz-xompressed).
However, the CVE database from FKIE is available as a git tree. Git is
pretty good at only sending delta when updating a local copy. In
addition, the git tree, contains each CVE as an individual file, so it
is relatively easier to scan and parse.
Switch to using a local git clone.
Slightly surprisingly (but not so much either), parsing the CVE files is
much faster when using the git working copy, than it is when parsing the
per-year feeds: indeed, the per-year feeds are xz-compressed, and even
if python is slow-ish to scan a directory and opening files therein, it
is still much faster than to decompress xz files. The timing delta [0]
is ~100s before and ~10s now, about a ten time improvement, over the
whole package set.
The drawback, however, is that the git tree is much bigger on-disk, from
~55MiB for the per-year compressed feeds, to 2.1GiB for the git tree
(~366MiB) and a working copy (~1.8GiB)... Given very few people are
going to use that, that's considered acceptable...
Eventually, with a bit of hacking [1], the two pkg-stats, before and
after this change, yield the same data (except for the date and commit
hash).
[0] hacking support/scripts/pkg-stats to display the time before/after
the CVE scan, and hacking support/scripts/cve.py to do no download so
that only the CVE scan happens (and also because the meta files are no
longer available).
[1] sorting the CVE lists in json, sorting the json keys, and using the
commit from the FKIE git tree that was used for the current per-year
feeds.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit fee7efafd0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using PLATFORM=k3 can leads to a runtime boot crash on some K3 SoC (e.g.
j721e) because the optee flavor is missing.
We could use BR2_TARGET_OPTEE_OS_PLATFORM=k3 and
BR2_TARGET_OPTEE_OS_PLATFORM_FLAVOR=am64x but we actually can use
BR2_TARGET_OPTEE_OS_PLATFORM=k3-am64x as explained in the optee-os
Makefile [1]:
# If $(PLATFORM) is defined and contains a hyphen, parse it as
# $(PLATFORM)-$(PLATFORM_FLAVOR) for convenience
This is how meta-ti set the optee-os platform:
meta-ti]$ git grep OPTEEMACHINE
meta-ti-bsp/conf/machine/am437x-hs-evm.conf:OPTEEMACHINE = "ti-am43xx"
meta-ti-bsp/conf/machine/am57xx-hs-evm.conf:OPTEEMACHINE = "ti-am57xx"
meta-ti-bsp/conf/machine/beagleplay.conf:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/dra7xx-hs-evm.conf:OPTEEMACHINE = "ti-dra7xx"
meta-ti-bsp/conf/machine/include/am62axx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am62pxx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am62xx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am64xx.inc:OPTEEMACHINE = "k3-am64x"
meta-ti-bsp/conf/machine/include/am65xx.inc:OPTEEMACHINE = "k3-am65x"
meta-ti-bsp/conf/machine/include/j7200.inc:OPTEEMACHINE = "k3-j721e"
meta-ti-bsp/conf/machine/include/j721e.inc:OPTEEMACHINE = "k3-j721e"
meta-ti-bsp/conf/machine/include/j721s2.inc:OPTEEMACHINE = "k3-j784s4"
meta-ti-bsp/conf/machine/include/j722s.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/j784s4.inc:OPTEEMACHINE = "k3-j784s4"
meta-ti uses the OPTEEMACHINE to set optee-os platform [2].
[1] https://github.com/OP-TEE/optee_os/blob/4.0.0/Makefile#L37
[2] https://git.yoctoproject.org/meta-arm/tree/meta-arm/recipes-security/optee/optee-os.inc?h=4.0.3#n23
Suggested-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit fde806f822)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using PLATFORM=k3 can leads to a runtime boot crash on some K3 SoC (e.g.
j721e) because the optee flavor is missing.
We could use BR2_TARGET_OPTEE_OS_PLATFORM=k3 and
BR2_TARGET_OPTEE_OS_PLATFORM_FLAVOR=am62x but we actually can use
BR2_TARGET_OPTEE_OS_PLATFORM=k3-am62x as explained in the optee-os
Makefile [1]:
# If $(PLATFORM) is defined and contains a hyphen, parse it as
# $(PLATFORM)-$(PLATFORM_FLAVOR) for convenience
This is how meta-ti set the optee-os platform:
meta-ti]$ git grep OPTEEMACHINE
meta-ti-bsp/conf/machine/am437x-hs-evm.conf:OPTEEMACHINE = "ti-am43xx"
meta-ti-bsp/conf/machine/am57xx-hs-evm.conf:OPTEEMACHINE = "ti-am57xx"
meta-ti-bsp/conf/machine/beagleplay.conf:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/dra7xx-hs-evm.conf:OPTEEMACHINE = "ti-dra7xx"
meta-ti-bsp/conf/machine/include/am62axx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am62pxx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am62xx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am64xx.inc:OPTEEMACHINE = "k3-am64x"
meta-ti-bsp/conf/machine/include/am65xx.inc:OPTEEMACHINE = "k3-am65x"
meta-ti-bsp/conf/machine/include/j7200.inc:OPTEEMACHINE = "k3-j721e"
meta-ti-bsp/conf/machine/include/j721e.inc:OPTEEMACHINE = "k3-j721e"
meta-ti-bsp/conf/machine/include/j721s2.inc:OPTEEMACHINE = "k3-j784s4"
meta-ti-bsp/conf/machine/include/j722s.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/j784s4.inc:OPTEEMACHINE = "k3-j784s4"
meta-ti uses the OPTEEMACHINE to set optee-os platform [2].
[1] https://github.com/OP-TEE/optee_os/blob/4.0.0/Makefile#L37
[2] https://git.yoctoproject.org/meta-arm/tree/meta-arm/recipes-security/optee/optee-os.inc?h=4.0.3#n23
Suggested-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit f68c45f733)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Codescape mips toolchains are old (2018) and use glibc 2.20 which is not
compatible with 64-bit time_t raising the following build failure with
libselinux since commit 1c2dbcdcf0:
In file included from selinux_restorecon.c:17:0:
/home/buildroot/autobuild/instance-1/output-1/host/mipsel-buildroot-linux-gnu/sysroot/usr/include/fts.h:41:3: error: #error "<fts.h> cannot be used with -D_FILE_OFFSET_BITS==64"
# error "<fts.h> cannot be used with -D_FILE_OFFSET_BITS==64"
^~~~~
Fixes: 1c2dbcdcf0
- http://autobuild.buildroot.org/results/a4d38af627a42a2c55d60129787c51353d5883bf
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 33605ea6d9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
bump to latest version because previous version did not work with python 3.11
Signed-off-by: Jeremy J. Peper <jeremy@jeremypeper.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 8a69af5fa4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
bump to latest version because previous version did not work with python 3.11
Signed-off-by: Jeremy J. Peper <jeremy@jeremypeper.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 0c27711002)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
bump to latest version because previous version did not work with python 3.11
corrected version mismatch with my first submission
Signed-off-by: Jeremy J. Peper <jeremy@jeremypeper.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 242781bb61)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Without python-gobject, we get the following runtime error:
ModuleNotFoundError: No module named 'gi'
Add python-gobject and propagate its dependencies.
While we're at it, split the DEPENDENCIES over several line and sort
them alphabetically.
Signed-off-by: Jeremy J. Peper <jeremy@jeremypeper.com>
Reviewed-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[Arnout: reorder everything alphabeticall, split DEPENDENCIES over
several lines.]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 945b9f8d8e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While fixing a build error
../src/egl/drivers/dri2/platform_x11.c: In function 'dri2_x11_get_msc_rate':
../src/egl/drivers/dri2/platform_x11.c:1229:44:
error: 'struct dri2_egl_display' has no member named 'screen_resources'
with this defconfig:
BR2_x86_64=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_IRIS=y
BR2_PACKAGE_MESA3D_OPENGL_GLX=y
BR2_PACKAGE_MESA3D_OPENGL_EGL=y
BR2_PACKAGE_MESA3D_OPENGL_ES=y
BR2_PACKAGE_XORG7=y
(crocus and i915 drivers are also affected) it turns out that we can
assume the need for dri3 support when X.org is enabled as a hard depen-
dency even if mesa3d's configure does not throw errors when missing,
like for the Intel drivers.
Before this patch these Config.in options were used:
config BR2_PACKAGE_MESA3D_DRI3
select BR2_PACKAGE_XLIB_LIBXSHMFENCE
select BR2_PACKAGE_MESA3D_DRI3 if BR2_PACKAGE_XORG7
which can be translated into:
select BR2_PACKAGE_XLIB_LIBXSHMFENCE if BR2_PACKAGE_XORG7
and used at option BR2_PACKAGE_MESA3D_DRIVER.
Configure option -Ddri3=enabled is passed to mesa3d when at least one
driver is enabled along with X.org:
ifeq ($(BR2_PACKAGE_MESA3D_DRIVER)$(BR2_PACKAGE_XORG7),yy)
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit e2f87b3c15)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
codesourcery arm/aarch64 toolchains are old (2014) and use glibc
2.18/2.20 which are not compatible with 64-bit time_t raising the
following build failure with libcgroup since commit
1c2dbcdcf0:
In file included from ./libcgroup-internal.h:25:0,
from parse.y:21:
/home/buildroot/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/fts.h:41:3: error: #error "<fts.h> cannot be used with -D_FILE_OFFSET_BITS==64"
# error "<fts.h> cannot be used with -D_FILE_OFFSET_BITS==64"
^
Fixes: 1c2dbcdcf0
- http://autobuild.buildroot.org/results/e28f955f2b360f6e7bb231a5a3800cfbd17a23d7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Peter: add Config.in.legacy entries]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 53a8c5150e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable -Werror to fix the following build failure with esp-hosted
raised at least since commit a382a7d554:
In function ‘destroy_cmd_wq’,
inlined from ‘esp_commands_teardown’ at /home/autobuild/autobuild/instance-4/output-1/build/esp-hosted-ce3c50a33fa4bc562a1b6cbcee292c1ae0b0a404/esp_hosted_ng/host/esp_cmd.c:1467:2:
./include/linux/workqueue.h:639:9: error: call to ‘__warn_flushing_systemwide_wq’ declared with attribute warning: Please avoid flushing system-wide workqueues. [-Werror=attribute-warning]
639 | __warn_flushing_systemwide_wq(); \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/autobuild/autobuild/instance-4/output-1/build/esp-hosted-ce3c50a33fa4bc562a1b6cbcee292c1ae0b0a404/esp_hosted_ng/host/esp_cmd.c:408:17: note: in expansion of macro ‘flush_scheduled_work’
408 | flush_scheduled_work();
| ^~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/6ac7a4601938d3296ed1657c06f8cdf433757d73
- http://autobuild.buildroot.org/results/7997cc8a67645a6e1cf4e24d172c6feae459dcfb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 6b56e0b4f0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Select libucontext if the toolchain doesn't support ucontext to allow
building php on musl
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 2824aa8a23)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Do not remove _FILE_OFFSET_BITS=64 from CFLAGS and CPPFLAGS to avoid the
following build failure with BR2_TIME_BITS_64 raised since commit
3c427c6472:
In file included from /home/fabrice/buildroot/output/host/mips-buildroot-linux-gnu/sysroot/usr/include/features.h:394,
from /home/fabrice/buildroot/output/host/mips-buildroot-linux-gnu/sysroot/usr/include/errno.h:25,
from pp.c:20:
/home/fabrice/buildroot/output/host/mips-buildroot-linux-gnu/sysroot/usr/include/features-time64.h:26:5: error: #error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
26 | # error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
| ^~~~~
Indeed, this LFS workaround was there since the addition of the package
in commit cb328f77f8 and is only needed
to fix a build failure with the old codesourcery-arm toolchain from 2014
which uses glibc < 2.23. as glibc 2.23 was released in February 2016:
https://sourceware.org/glibc/wiki/Release/2.23, drop this workaround as
already done for libselinux in commit
c1fa9bc2f7. A follow-up patch will also
drop codesourcery-arm toolchain.
Fixes: 3c427c6472
- No autobuilder failures (yet)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 0ac2d5a41a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Do not remove _FILE_OFFSET_BITS=64 from CFLAGS and CPPFLAGS to avoid the
following build failure with BR2_TIME_BITS_64 raised since commit
3c427c6472:
In file included from /home/fabrice/buildroot/output/host/mips-buildroot-linux-gnu/sysroot/usr/include/features.h:394,
from /home/fabrice/buildroot/output/host/mips-buildroot-linux-gnu/sysroot/usr/include/fts.h:53,
from restore.h:6,
from restore.c:1:
/home/fabrice/buildroot/output/host/mips-buildroot-linux-gnu/sysroot/usr/include/features-time64.h:26:5: error: #error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
26 | # error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
| ^~~~~
Indeed, this LFS workaround was there since the addititon of the package
in commit 9d6da7a264 and is only needed to
fix a build failure with the old codesourcery-arm toolchain from 2014
which uses glibc < 2.23. as glibc 2.23 was released in February 2016:
https://sourceware.org/glibc/wiki/Release/2.23, drop this workaround as
already done for libselinux in commit
c1fa9bc2f7. A follow-up patch will also
drop codesourcery-arm toolchain.
Fixes: 3c427c6472
- No autobuilder failures (yet)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 85acd9b5b9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Do not remove _FILE_OFFSET_BITS=64 from CFLAGS and CPPFLAGS to avoid the
following build failure with BR2_TIME_BITS_64 raised since commit
3c427c6472:
In file included from /home/fabrice/buildroot/output/host/mips-buildroot-linux-gnu/sysroot/usr/include/features.h:394,
from ../include/libcgroup/error.h:9,
from ../include/libcgroup.h:21,
from log.c:15:
/home/fabrice/buildroot/output/host/mips-buildroot-linux-gnu/sysroot/usr/include/features-time64.h:26:5: error: #error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
26 | # error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
| ^~~~~
Indeed, this LFS workaround is there since the addition of the package
in commit ff7191c12e and is only needed to
fix a build failure with the old codesourcery-arm toolchain from 2014
which uses glibc < 2.23. as glibc 2.23 was released in February 2016:
https://sourceware.org/glibc/wiki/Release/2.23, drop this workaround as
already done for libselinux in commit
c1fa9bc2f7. A follow-up patch will also
drop codesourcery-arm toolchain.
Fixes: 3c427c6472
- No autobuilder failures (yet)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 1c2dbcdcf0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following CVEs:
CVE-2024-24783: crypto/x509: Verify panics on certificates with an unknown public key algorithm
CVE-2023-45290: net/http: memory exhaustion in Request.ParseMultipartForm
CVE-2023-45289: net/http, net/http/cookiejar: incorrect forwarding of sensitive headers and cookies on HTTP redirect
CVE-2024-24785: html/template: errors returned from MarshalJSON methods may break template escaping
CVE-2024-24784: net/mail: comments in display names are incorrectly handled
https://go.dev/doc/devel/release#go1.21.8
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit a94f816e45)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Do not remove _FILE_OFFSET_BITS=64 from CFLAGS and CPPFLAGS to avoid the
following build failure with BR2_TIME_BITS_64 raised since commit
3c427c6472:
configure:5239: /home/autobuild/autobuild/instance-1/output-1/host/bin/mips-buildroot-linux-gnu-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_TIME_BITS=64 -Os -g2 -I/home/autobuild/autobuild/instance-1/output-1/host/bin/../mips-buildroot-linux-gnu/sysroot/usr/include/tirpc -fno-builtin -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_TIME_BITS=64 conftest.c >&5
In file included from /home/autobuild/autobuild/instance-1/output-1/host/mips-buildroot-linux-gnu/sysroot/usr/include/features.h:394,
from /home/autobuild/autobuild/instance-1/output-1/host/mips-buildroot-linux-gnu/sysroot/usr/include/bits/libc-header-start.h:33,
from /home/autobuild/autobuild/instance-1/output-1/host/mips-buildroot-linux-gnu/sysroot/usr/include/limits.h:26,
from /home/autobuild/autobuild/instance-1/output-1/host/lib/gcc/mips-buildroot-linux-gnu/13.2.0/include/limits.h:205,
from /home/autobuild/autobuild/instance-1/output-1/host/lib/gcc/mips-buildroot-linux-gnu/13.2.0/include/syslimits.h:7,
from /home/autobuild/autobuild/instance-1/output-1/host/lib/gcc/mips-buildroot-linux-gnu/13.2.0/include/limits.h:34,
from conftest.c:12:
/home/autobuild/autobuild/instance-1/output-1/host/mips-buildroot-linux-gnu/sysroot/usr/include/features-time64.h:26:5: error: #error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
26 | # error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
| ^~~~~
[...]
checking for /home/autobuild/autobuild/instance-1/output-1/host/bin/mips-buildroot-linux-gnu-gcc options needed to detect all undeclared functions... cannot detect
configure: error: in `/home/autobuild/autobuild/instance-1/output-1/build/ltp-testsuite-20240129':
configure: error: cannot make /home/autobuild/autobuild/instance-1/output-1/host/bin/mips-buildroot-linux-gnu-gcc report undeclared builtins
Indeed, this LFS workaround was added by commit
ca3524ba70 and is only needed to fix a
build failure with the old codesourcery-arm toolchain from 2014 which
uses glibc < 2.23. as glibc 2.23 was released in February 2016:
https://sourceware.org/glibc/wiki/Release/2.23, drop this workaround as
already done for libselinux in commit
c1fa9bc2f7. A follow-up patch will also
drop codesourcery-arm toolchain.
Fixes:
- http://autobuild.buildroot.org/results/d2e75a79bc42b6a9a2b407fd557aca5c7f207d84
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
poco can't be built statically since commit
073a89196a. However, commit
add7c433d2 enabled static (and shared)
build with BR2_SHARED_STATIC_LIBS resulting in the following build
failure since at least version 1.11.1:
/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/mips-buildroot-linux-gnu/11.2.0/../../../../mips-buildroot-linux-gnu/bin/ld: /home/buildroot/autobuild/instance-1/output-1/build/poco-1.11.1/lib/Linux/mips/libPocoXML.a(ParserEngine.o): in function `Poco::XML::ParserEngine::handleStartElement(void*, char const*, char const**)':
ParserEngine.cpp:(.text+0x2f8): undefined reference to `XML_GetSpecifiedAttributeCount'
Fixes: add7c433d2
- http://autobuild.buildroot.org/results/afc434a13d5e7a8affa4abb4058d7bebc81aca29
- http://autobuild.buildroot.org/results/860b70a8c9c4a6a53247ac4bdb4fd0851b28c61a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with gcc 4.8 raised since the addition
of the package in commit 928b7219cd:
../src/hawkbit-client.c:873:17: error: 'for' loop initial declarations are only allowed in C99 mode
for (const gint *code = &resumable_codes[0]; *code; code++)
^
../src/hawkbit-client.c:873:17: note: use option -std=c99 or -std=gnu99 to compile your code
Fixes: 928b7219cd
- http://autobuild.buildroot.org/results/e275d0ec4fe1da418a6163b46666316034b83b19
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Do not remove _FILE_OFFSET_BITS=64 from CFLAGS to avoid the following
build failure with BR2_TIME_BITS_64 raised since commit
3c427c6472:
In file included from /home/thomas/autobuild/instance-1/output-1/host/microblaze-buildroot-linux-gnu/sysroot/usr/include/features.h:394,
from /home/thomas/autobuild/instance-1/output-1/host/microblaze-buildroot-linux-gnu/sysroot/usr/include/bits/libc-header-start.h:33,
from /home/thomas/autobuild/instance-1/output-1/host/microblaze-buildroot-linux-gnu/sysroot/usr/include/stdio.h:27,
from /home/thomas/autobuild/instance-1/output-1/build/fluent-bit-2.1.7/tools/xxd-c/xxd-c.c:27:
/home/thomas/autobuild/instance-1/output-1/host/microblaze-buildroot-linux-gnu/sysroot/usr/include/features-time64.h:26:5: error: #error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
26 | # error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
| ^~~~~
Indeed, this LFS workaround was present since the addition of the
package in commit 6a0f7c39bc and is
only needed to fix a build failure with the old codesourcery-arm
toolchain from 2014 which uses glibc < 2.23. as glibc 2.23 was released
in February 2016: https://sourceware.org/glibc/wiki/Release/2.23, drop
this workaround as already done for libselinux in commit
c1fa9bc2f7. A follow-up patch will also
drop codesourcery-arm toolchain.
Fixes: 3c427c6472
- http://autobuild.buildroot.org/results/ff5c60cd038550453ce138fe2a9383af2f5d6f2f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While building the rust toolchain, the build system ends up using
cargo (from [...]/output/build/host-rust-bin-1.74.1/cargo/bin/cargo)
to build some tools like rustdoc-tool.
But the host-rust package doesn't use the cargo infractructure (since
it provides cargo binary) and our cargo environment variables [1] are
not set to crosscompile cargo packages in the rust toolchain.
For exemple, we usually set RUSTFLAGS="-C link-arg=-Wl,-rpath,$(HOST_DIR)/lib"
to force cargo using libraries provided by Buildroot in $(HOST_DIR)/lib.
RUSTFLAGS is actually needed to find zlib library (host-zlib) to link
rustdoc-tool when zlib is not installed on the host.
Add $(HOST_PKG_CARGO_ENV) in HOST_RUST_BUILD_CMDS since it already
includes RUSTFLAGS but also CARGO_HOME.
Fixes:
error: could not compile `rustdoc-tool` (bin "rustdoc_tool_binary") due to previous error
[1] https://gitlab.com/buildroot.org/buildroot/-/blob/2024.02-rc1/package/pkg-cargo.mk#L165
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now that oracle-mysql is dropped there isn't any need for the mysql virtual
package.
Adjust the other packages to directly use the mariadb symbols.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The package has not seen any updates for ~10 years, E.G. latest version
bump was in commit 42c56751fc (mysql: bump to version 5.1.73) and the
version contains multiple known vulnerabilities, so drop the package.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following static build failure raised since the addition of the
package in commit 0a01085abe:
[ 26%] Linking CXX shared library libSPIRV-Tools-shared.so
/home/autobuild/autobuild/instance-11/output-1/host/lib/gcc/xtensa-buildroot-linux-uclibc/12.3.0/../../../../xtensa-buildroot-linux-uclibc/bin/ld: /home/autobuild/autobuild/instance-11/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/lib/libc.a(__uClibc_main.os): in function `__uClibc_init':
__uClibc_main.c:(.text+0x98): undefined reference to `__fini_array_start'
Fixes: 0a01085abe
- http://autobuild.buildroot.org/results/f953d500830e8124c6e85c57887106f9352cb4c2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libressl dropped engine support since version 3.8.1 resulting in the
following build failure since bump of libressl to version 3.8.2 in
commit 21eca49ed5:
/home/autobuild/autobuild/instance-0/output-1/host/lib/gcc/armeb-buildroot-linux-gnueabi/12.3.0/../../../../armeb-buildroot-linux-gnueabi/bin/ld: ../library/librdkafka.a(rdkafka_admin.c.o): in function `rd_kafka_UserScramCredentialUpsertion_new':
/home/autobuild/autobuild/instance-0/output-1/build/fluent-bit-2.2.2/lib/librdkafka-2.3.0/src/rdkafka_admin.c:5909: undefined reference to `RAND_priv_bytes'
/home/autobuild/autobuild/instance-0/output-1/host/lib/gcc/armeb-buildroot-linux-gnueabi/12.3.0/../../../../armeb-buildroot-linux-gnueabi/bin/ld: ../library/librdkafka.a(rdkafka_ssl.c.o): in function `rd_kafka_ssl_set_certs':
/home/autobuild/autobuild/instance-0/output-1/build/fluent-bit-2.2.2/lib/librdkafka-2.3.0/src/rdkafka_ssl.c:1384: undefined reference to `ENGINE_load_ssl_client_cert'
Fixes:
- http://autobuild.buildroot.org/results/dd74eb4e31e0e4d23e7638cff47c6876fda59952
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For release note since version 38, see [1].
This commit introduces changes in package patches:
- 0001: Patch dropped. An similar change is included in this release.
See [2].
- 0002: Patch no longer needed since the package build recipe sets
CFLAGS without -Werror, and the package makefile sets -Werror only
by default. See [3], included since version 38.
- 0003: Rebased on version 39 and renamed to 0001. The patch is also
flagged as "Upstream: Not applicable".
- 0004: Patch dropped. Included in this release. See [4].
This commit also removes all patch entries in ".checkpackageignore"
(since the remaining patch has its "Upstream:" tag).
This version 39 also fixes few build failures. Those can be seen by
running the command "utils/test-pkg -a -p efivar". The first group
of build failures is:
br-arm-basic [28/45]: FAILED
br-i386-pentium4-full [31/45]: FAILED
br-mips64-n64-full [33/45]: FAILED
br-mips64r6-el-hf-glibc [34/45]: FAILED
linaro-aarch64 [38/45]: FAILED
linaro-arm [39/45]: FAILED
Fixes:
/buildroot/host/opt/ext-toolchain/bin/../lib/gcc/aarch64-linux-gnu/7.3.1/../../../../aarch64-linux-gnu/bin/ld: .data not found for insert
collect2: error: ld returned 1 exit status
efivar 38 was using linker scripts, which was not working in all
cases. Those issues are fixed by the upstream commit [5] which
removes the use of this linker script (included in this release).
The "test-pkg -a -p efivar" also caught another kind of build
failures:
br-i386-pentium-mmx-musl [32/45]: FAILED
Fixes:
In file included from efivar.h:18,
from efisec.h:24,
from secdb-dump.c:7:
list.h: In function 'list_sort':
list.h:152:2: warning: implicit declaration of function 'qsort_r'; did you mean 'qsort'? [-Wimplicit-function-declaration]
152 | qsort_r(array, nmemb, sizeof(*array), cmp, state);
| ^~~~~~~
| qsort
Those failures were introduced in commit f24029b561 "package/efivar:
bump to version 38". This is because efivar introduced a usage of the
qsort_r() libc function, in upstream commit [6], first included in
version 38.
Musl libc added the qsort_r() function in upstream commit [7], included in
version v1.2.3 (2022-04-07). So external toolchains including a Musl older
than this version will fail. But given how old this issue is (musql 1.2.3
is included in Buildroot since 2022.05), this issue is ignored.
uClibc-ng external toolchains are also not affected, since it added
the qsort_r() function in commit [8] included since its first version
v1.0.0 (2015-02-02). So there is no need to exclude external uclibc
toolchains.
[1] https://github.com/rhboot/efivar/releases/tag/39
[2] https://github.com/rhboot/efivar/commit/4f3da3dc351d7743d91327e74fcaaa13299eeb39
[3] https://github.com/rhboot/efivar/commit/998f617cec92d526e1fadb745673ceef63fa1483
[4] https://github.com/rhboot/efivar/commit/cece3ffd5be2f8641eb694513f2b73e5eb97ffd3
[5] https://github.com/rhboot/efivar/commit/cfd686de51494d3e34be896a91835657ccab37d4
[6] https://github.com/rhboot/efivar/commit/62afa2aa588fb0a6ff56acdd268b9f3c557028b8
[7] https://git.musl-libc.org/cgit/musl/commit/?id=b76f37fd5625d038141b52184956fb4b7838e9a5
[8] https://gogs.waldemar-brodkorb.de/oss/uclibc-ng/commit/515d54433138596e81267237542bd9168b8cc787
Signed-off-by: Julien Olivain <ju.o@free.fr>
[Peter: drop dependency on !external musl]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Do not remove _FILE_OFFSET_BITS=64 from CFLAGS and CPPFLAGS to avoid the
following build failure with BR2_TIME_BITS_64 raised since commit
3c427c6472:
In file included from /home/autobuild/autobuild/instance-9/output-1/per-package/libselinux/host/mipsel-buildroot-linux-gnu/sysroot/usr/include/features.h:394,
from /home/autobuild/autobuild/instance-9/output-1/per-package/libselinux/host/mipsel-buildroot-linux-gnu/sysroot/usr/include/bits/libc-header-start.h:33,
from /home/autobuild/autobuild/instance-9/output-1/per-package/libselinux/host/mipsel-buildroot-linux-gnu/sysroot/usr/include/stdint.h:26,
from /home/autobuild/autobuild/instance-9/output-1/per-package/libselinux/host/lib/gcc/mipsel-buildroot-linux-gnu/12.3.0/include/stdint.h:9,
from ../include/selinux/avc.h:9,
from avc.c:10:
/home/autobuild/autobuild/instance-9/output-1/per-package/libselinux/host/mipsel-buildroot-linux-gnu/sysroot/usr/include/features-time64.h:26:5: error: #error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
26 | # error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
| ^~~~~
This LFS workaround for glibc < 2.23 was added in 2016 by commit
ebcca24c95 and is probably not needed
anymore as glibc 2.23 was released in February 2016:
https://sourceware.org/glibc/wiki/Release/2.23
Fixes:
- http://autobuild.buildroot.org/results/d85c81f87adf3a5945fa369bcec233e6def2ed12
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Fix the following build failure raised since bump to version 1.35 in
commit d4d483451f:
/home/thomas/autobuild/instance-1/output-1/host/lib/gcc/xtensa-buildroot-linux-uclibc/12.3.0/../../../../xtensa-buildroot-linux-uclibc/bin/ld: buffer.o: in function `bufmap_reset':
buffer.c:(.text+0xe8): undefined reference to `libintl_gettext'
Fixes:
- http://autobuild.buildroot.org/results/99b05d4b495b6337c6a48ea5a551a3a84c6d2e6b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
As expected by Peter in [1], the hardcoded 3 seconds for waiting the
RAID array to rebuild are not enough on slow test host runners. This
test already failed at least once for that reason, in [2].
In order to fix those failures, this commit adds extra logic to allow
several attempts, before failing. The timeout is currently set at 10
attempts, waiting 3 seconds between each attempts. To help even more,
those 3 seconds are also scaled with the timeout_multiplier.
Fixes: [2]
[1] https://lists.buildroot.org/pipermail/buildroot/2024-February/685034.html
[2] https://gitlab.com/buildroot.org/buildroot/-/jobs/6137469690
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
As suggested by Thomas Petazzoni in [1], add a comment on
BR2_TOOLCHAIN_HAS_UCONTEXT to specify that this boolean will be set to
true only when a toolchain provides a full featured ucontext
implementation with ucontext_t and {get,make,set}context. As a result,
drop its selection from BR2_TOOLCHAIN_USES_MUSL to fix the following
musl build failure on php:
/home/autobuild/autobuild/instance-8/output-1/host/lib/gcc/m68k-buildroot-linux-musl/12.3.0/../../../../m68k-buildroot-linux-musl/bin/ld: Zend/zend_fibers.o: in function `zend_fiber_init_context':
zend_fibers.c:(.text+0x946): undefined reference to `getcontext'
[1]: https://patchwork.ozlabs.org/project/buildroot/patch/20230516193307.1543455-1-bernd.kuhls@t-online.de/
Fixes:
- http://autobuild.buildroot.org/results/271f9fb8bfa5ba2f74feef81e6b375b54e21cece
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
GNU Octave changed its detection of readline library in [1]. This
commit was first included in version 8.1.0.
GNU Octave was updated to 8.1.0 in Buildroot in commit b36e4b10f3
"package/octave: bump to version 8.1.0".
Since this commit, Octave can fail to find readline automatically in
some specific situations. For example, when host system is Fedora 39
and the host "readline-devel" package is installed (see detailed
explanation below).
Octave is now using a m4 macro from gnulib to detect readline.
See [2].
This macro is calling AC_LIB_LINKFLAGS_BODY([readline]). Note that
this macro will look into $libdir and $includedir by default. See [3].
Buildroot is calling target autotools configure command with
--prefix=/usr and --exec-prefix=/usr arguments. See [4].
Autotools derives libdir='${exec_prefix}/lib' and
includedir='${prefix}/include'.
Finally, gnulib will also search automatically into alternate library
directories (i.e. lib32, lib64). See [5].
All of this will make the configure script searching the readline
library by default (i.e. if the library prefix is not provided) into
the host "/usr/lib", "/usr/lib32" and "/usr/lib64", when configuring
for target.
This issue is not happening on the Buildroot docker reference image,
because the package "libreadline-dev" is not present in this image.
Even if the package "libreadline-dev" is installed on a Debian based
host systems, the issue is still not happening because libraries are
installed in the path "/usr/lib/x86_64-linux-gnu", which is not
searched by gnulib macros.
On host systems which installs libraries into one of the
"/usr/lib{,32,64}" directories, the Octave configuration script will
fail, because it will detect the host library and try to link against
it with target architecture and compilation flags and will fail. Since
the --enable-readline configure option is present, the configuration
script will fail because it cannot find a working readline library.
This can be seen in the octave configuration log, in file:
output/build/octave-8.4.0/config.log
configure:73671: checking for readline
configure:73705: /buildroot/output/host/bin/aarch64-none-linux-gnu-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=1 -pthread -fopenmp -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c -lpthread -lm /usr/lib64/libreadline.so >&5
/buildroot/output/host/opt/ext-toolchain/bin/../lib/gcc/aarch64-none-linux-gnu/13.2.1/../../../../aarch64-none-linux-gnu/bin/ld: /usr/lib64/libreadline.so: error adding symbols: file in wrong format
collect2: error: ld returned 1 exit status
This situation can be reproduced on a Fedora 39 x86_64 host system,
with the "readline-devel" package installed. Note: uninstalling the
"readline-devel" will work around the issue.
The issue can be reproduced with a Buildroot configuration such as:
cat > .config <<EOF
BR2_aarch64=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_OCTAVE=y
BR2_PACKAGE_READLINE=y
EOF
make olddefconfig
make
In order to avoid those host/target readline detection mix-ups, the
readline search prefix need to be explicitly passed during octave
configuration. This commit adds this search prefix to fix this build
issue.
Fixes:
checking for readline... (cached) no
checking for readline/readline.h... (cached) yes
checking for readline/history.h... (cached) yes
configure: WARNING: I need GNU Readline 4.2 or later
configure: error: this is fatal unless you specify --disable-readline
[1] https://github.com/gnu-octave/octave/commit/3645c78658c4c66f2bc346fdbc5c7c77d8d8dd12
[2] https://git.savannah.gnu.org/cgit/gnulib.git/tree/m4/readline.m4?id=2cdc1bafb20b187ad067056e090fcb4396ed9099
[3] https://git.savannah.gnu.org/cgit/gnulib.git/tree/m4/lib-link.m4?id=2cdc1bafb20b187ad067056e090fcb4396ed9099#n190
[4] https://gitlab.com/buildroot.org/buildroot/-/blob/2023.11/package/pkg-autotools.mk#L175
[5] https://git.savannah.gnu.org/cgit/gnulib.git/tree/m4/lib-prefix.m4?id=2cdc1bafb20b187ad067056e090fcb4396ed9099#n276
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Since the ARC-special GCC version was bumped from gcc 10.x to gcc 13.x
in commit 045ab73702 ("toolchain: bump
ARC toolchain components to arc-2023.09-release"), the
BR2_GCC_VERSION_ARC option definition is not entirely correct: it
selects BR2_TOOLCHAIN_GCC_AT_LEAST_10, while it should select
BR2_TOOLCHAIN_GCC_AT_LEAST_13. This commit fixes this.
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 7ea38660e0 confused bigint [1] with
Math::BigInt [2]:
Can't locate bigint.pm in @INC (you may need to install the bigint module) (@INC contains: /home/buildroot/autobuild/instance-1/output-1/build/libopenssl-3.2.1/crypto/chacha/asm/../.. /home/buildroot/autobuild/instance-1/output-1/host/lib/perl /usr/local/lib64/perl5/5.36 /usr/local/share/perl5/5.36 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5) at /home/buildroot/autobuild/instance-1/output-1/build/libopenssl-3.2.1/crypto/chacha/asm/../../perlasm/s390x.pm line 16.
BEGIN failed--compilation aborted at /home/buildroot/autobuild/instance-1/output-1/build/libopenssl-3.2.1/crypto/chacha/asm/../../perlasm/s390x.pm line 16.
[1] https://perldoc.perl.org/bigint
[2] https://perldoc.perl.org/Math::BigInt
Fixes: 7ea38660e0
- http://autobuild.buildroot.org/results/777d86a1e53dc3d6a16c829348673f1c33245a6c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
strace needs headers >= 5.0 and
https://github.com/torvalds/linux/commit/9966a05c7b80f075f2bc7e48dbb108d3f2927234
to avoid the following build failure on musl and aarch64 due to headers
conflict raised at least since bump to version 6.0 in commit
544806bfd8:
In file included from /home/autobuild/autobuild/instance-7/output-1/host/aarch64_be-buildroot-linux-musl/sysroot/usr/include/signal.h:48,
from strace.c:17:
/home/autobuild/autobuild/instance-7/output-1/host/aarch64_be-buildroot-linux-musl/sysroot/usr/include/bits/signal.h:18:16: error: redefinition of 'struct sigcontext'
18 | typedef struct sigcontext {
| ^~~~~~~~~~
In file included from /home/autobuild/autobuild/instance-7/output-1/host/aarch64_be-buildroot-linux-musl/sysroot/usr/include/asm/ptrace.h:26,
from /home/autobuild/autobuild/instance-7/output-1/host/aarch64_be-buildroot-linux-musl/sysroot/usr/include/linux/ptrace.h:107,
from ptrace.h:33,
from strace.c:16:
/home/autobuild/autobuild/instance-7/output-1/host/aarch64_be-buildroot-linux-musl/sysroot/usr/include/asm/sigcontext.h:28:8: note: originally defined here
28 | struct sigcontext {
| ^~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/74a480aa76970b36dcd890d9bd7a9df1d49e8e16
- http://autobuild.buildroot.org/results/79ee8ae5fb9712fd874b56e836eca1b997c50cd9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Peter: fix architecture conditional]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
python-setuptools-scm-git-archive is obsolete as
python-setuptools-scm >= 7.0.0 supports Git archives by itself.
Moreover, it raises the following build failure without pip since its
addition in commit 9359325c60:
/nvmedata/autobuild/instance-3/output-1/per-package/host-python-setuptools-scm-git-archive/host/bin/python: No module named pip
Traceback (most recent call last):
File "/nvmedata/autobuild/instance-3/output-1/per-package/host-python-setuptools-scm-git-archive/host/lib/python3.10/site-packages/setuptools/installer.py", line 82, in fetch_build_egg
subprocess.check_call(cmd)
File "/nvmedata/autobuild/instance-3/output-1/per-package/host-python-setuptools-scm-git-archive/host/lib/python3.10/subprocess.py", line 369, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['/nvmedata/autobuild/instance-3/output-1/per-package/host-python-setuptools-scm-git-archive/host/bin/python', '-m', 'pip', '--disable-pip-version-check', 'wheel', '--no-deps', '-w', '/tmp/tmpaxobatcs', '--quiet', 'typing-extensions']' returned non-zero exit status 1.
Fixes:
- http://autobuild.buildroot.org/results/d05e412170c427e4f210da164c783b3527f15892
- http://autobuild.buildroot.org/results/50f80cfabccbe5c75cd889ce6af2b418e376d4e5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Group _CONF_{ENV,OPTS} together after the autreconf ones.
Keep AUTORECONF=YES close to AUTORECONF_OPTS
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
host-rust package depends on several host packages to provide tools and
libraries but it doesn't take into account out host libraries in
HOST_DIR while building rustc compiler. Indeed, rustc needs zlib and
fails to link if zlib is not installed on the host.
error: could not compile `rustc_driver` (lib) due to previous error
If zlib is installed on the host, we can notice it with ldd tool (while
it should be linked with the one provided by Buildroot host-zlib):
ldd [...]TestRust/host/bin/rustc
libz.so.1 => /lib64/libz.so.1
Provide HOST_LDFLAGS using llvm.ldflags in config.toml.
(HOST_LDFLAGS provides -L$(HOST_DIR)/lib -Wl,-rpath,$(HOST_DIR)/lib)
With that fixed, rustc_driver link with libz from HOST_DIR but the
host-rust build still fail later due to another issue.
error: could not compile `rustdoc-tool` (bin "rustdoc_tool_binary") due to previous error
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6256881545http://autobuild.buildroot.org/results/a6b/a6b28783f29e6b729824bf42679a62f72ad5bee0
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[yann.morin.1998@free.fr: slight rewording in commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Several rust tools are linking against zlib, so add the depedency
explicitly in HOST_RUST_DEPENDENCIES.
For now, host-rust build system is not able to find zlib provided
by Buildroot in HOST_DIR due to at least two issues that will be
fixed in followup commits.
Note that host-zlib is already in the dependency chain, by way of
host-openssl, but since rust needs for itself, we need to add it
as an explicit dependency.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[yann.morin.1998@free.fr: add not about transitive dependency]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 722b84eafa forgot to update
nginx-naxsi resulting in the following build failure:
In file included from ../nginx-naxsi-d714f1636ea49a9a9f4f06dba14aee003e970834/naxsi_src/naxsi_runtime.c:7:
../nginx-naxsi-d714f1636ea49a9a9f4f06dba14aee003e970834/naxsi_src/naxsi.h:147:3: error: unknown type name 'ngx_regex_compile_t'
147 | ngx_regex_compile_t* target_rx;
| ^~~~~~~~~~~~~~~~~~~
Fixes: 722b84eafa
- http://autobuild.buildroot.org/results/87bbcf946ccbd8e3bf1ca9f39464f4bb198c8d42
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised since the addition of the package
in commit ea45b95c0e:
In file included from third_party/boringssl-with-bazel/src/include/openssl/base.h:78,
from third_party/boringssl-with-bazel/src/include/openssl/ssl.h:145,
from ./src/core/tsi/ssl/key_logging/ssl_key_logging.h:23,
from ./src/core/lib/security/security_connector/ssl_utils.h:42,
from ./src/core/lib/security/credentials/tls/grpc_tls_certificate_distributor.h:36,
from ./src/core/ext/xds/certificate_provider_store.h:44,
from src/core/ext/xds/certificate_provider_store.cc:21:
third_party/boringssl-with-bazel/src/include/openssl/target.h:62:2: error: #error "Unknown target CPU"
62 | #error "Unknown target CPU"
| ^~~~~
Fixes: ea45b95c0e
- http://autobuild.buildroot.org/results/36686aca1b45f0bf692a60e67a48424b561930a3
- http://autobuild.buildroot.org/results/4f79c7b1b2fc3306f300ae3ec0aa4439725814c1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A vulnerability was found in obgm libcoap 4.3.4. It has been rated as
critical. Affected by this issue is the function get_split_entry of the
file src/coap_oscore.c of the component Configuration File Handler. The
manipulation leads to stack-based buffer overflow. The attack may be
launched remotely. The exploit has been disclosed to the public and may
be used. It is recommended to apply a patch to fix this issue.
VDB-252206 is the identifier assigned to this vulnerability.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2024-25062: An issue was discovered in libxml2 before 2.11.7 and
2.12.x before 2.12.5. When using the XML Reader interface with DTD
validation and XInclude expansion enabled, processing crafted XML
documents can lead to an xmlValidatePopElement use-after-free.
https://gitlab.gnome.org/GNOME/libxml2/-/blob/v2.12.5/NEWS
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Hash of COPYING.NEWLIB is wrong since the addition of the package in
commit 3b95ff658b:
ERROR: COPYING.NEWLIB has wrong sha256 hash:
ERROR: expected: 422aa40293093fb54fc66e692a0d68fd0b24ed5602e5d1d33ad05ba3909057e9
ERROR: got : 9a59b4ee3af067045fe0ea78786201c42d54756fe48cbccf44f3dfc398474717
Fixes: 3b95ff658b
- No autobuilder failures (yet)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure without makeinfo raised since the
addition of the package in commit
3b95ff658b:
make[5]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/newlib-bare-metal-4.4.0/microblazeel-xilinx-elf/libgloss'
MAKEINFO ../.././libgloss/doc/porting.info
/home/buildroot/autobuild/instance-2/output-1/build/newlib-bare-metal-4.4.0/missing: line 81: makeinfo: command not found
Fixes: 3b95ff658b
- http://autobuild.buildroot.org/results/23e6641cbce62258310c300f8aed5d6a76973d72
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit b7232c51dd added default setting
for bare-metal toolchain arch but unfortunately it used configlines.add
instead of configlines.append resulting in the following build failure:
/bin/sh: line 8: /home/autobuild/autobuild/instance-1/output-1/per-package/host-gcc-bare-metal/host/bin/-ar: No such file or directory
While at it, also append /n for consistency
Fixes: b7232c51dd
- http://autobuild.buildroot.org/results/95ac565653ddb5c14ec71470c32a34ad10b048cb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 22b6945552 (support/scripts/cve.py: switch from NVD to FKIE for
the JSON files) had to change the decompressor from gz to xz, as the new
location is using xz compression.
That commit mentioned that it was spawning an external xz process to do
the decompression, on the pretence that "there is no xz decompressor in
Python stdlib."
Before version 3.1, ijson.items() only accepted a file-like object as
input (that file-like object could yield bytes() or str(), both were
supported). Starting with version 3.1, ijson.items() also accepts that
it be directly passed bytes() or str() directly. subprocess.check_output()
means we are now passing bytes() to ijson.items(), so it fails on ijson
versions before 3.1, with failures such as:
[...]
File "/usr/lib/python3/dist-packages/ijson/backends/python.py", line 25, in Lexer
if type(f.read(0)) == bytetype:
AttributeError: 'bytes' object has no attribute 'read'
Ubuntu 20.04, on which the pkg-stats run to generate the daily report,
only has ijson 2.3. More recent distros have more recent versions of
ijson, like Fedora 39 that has 3.2.3, recent enough to support being fed
bytes(). Commit 22b6945552 was tested on Fedora 39, so did not catch
the issue.
However, the reasoning in 22b6945552 is wrong: there *is* the lzma
module, at least since python 3.3 (that is, aeons ago), which is able to
read xz-compressed files; it also has an API similar to the gzip module,
and can provide a file-like object that exposes the decompressed data.
So, do just that: provide an lzma-wrapped file-like object to ijson, so
that we can eventually recover our daily reports that everything is
broken! :-]
Note that this construct still works on recent versions!
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libheif raises the following build failure with libjpeg since bump to
version 1.17.5 in commit 5714126eda and
https://github.com/strukturag/libheif/commit/ebd13a20b8b7f1964939642b08b662ef7e483f39
/home/buildroot/autobuild/instance-3/output-1/build/libheif-1.17.5/libheif/plugins/encoder_jpeg.cc: In function 'heif_error jpeg_encode_image(void*, const heif_image*, heif_image_input_class)':
/home/buildroot/autobuild/instance-3/output-1/build/libheif-1.17.5/libheif/plugins/encoder_jpeg.cc:366:37: error: invalid conversion from 'long unsigned int*' to 'size_t*' {aka 'unsigned int*'} [-fpermissive]
366 | jpeg_mem_dest(&cinfo, &outbuffer, &outlength);
| ^~~~~~~~~~
| |
| long unsigned int*
Fixes:
- http://autobuild.buildroot.org/results/8ca909564c8dabe28ad08c96ebbc04b25592e727
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit f71d9f49e5 (support/scripts/pkg-stats: fix datetime deprecation
warning) forgot to consider that the datetime.UTC suggested by python
3.12, was only introduced with python 3.11.
However, we are still generating the daily report on a python 3.8
version, which fails at runtime:
AttributeError: module 'datetime' has no attribute 'UTC'
It turns out that datetime.UTC is just an alias for datetime.timezone.utc,
which seems to have existed since before python3...
Use datetime.timezone.utc instead of its alias.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While the old NVD JSON feed provided data files where the CVEs were
sorted by ID, the new feed from FKIE does not have sorted CVEs.
Add a method to sort a list of CVE IDs (i.e. CVE ID strings, not CVE
objects!), and use that when emiting the HTML output.
The JSON output need not be sorted, because it is supposed to be used
for post-processing, and we do not care about the ordering there; a
consumer interested in sorting should sort on their side.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit 22b6945552 (support/scripts/cve.py: switch from NVD to FKIE for
the JSON files) missed the fact that the layout of the FKIE data files
are different from the original NVD ones. They are formatted according
to the NVD v2 API.
Most differences are relatively trivial fields renaming, and those are
easily spotted in this patch.
There is however one key difference in the layout of the configurations.
Where the NVD had "configurations" as an object with a "nodes" key, the
FKIE has a "configurations" as a list of objects with a single "nodes"
key; i.e. it is one-level deeper.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Abide by the warning reported with python 3.12:
.../support/scripts/pkg-stats:1289: DeprecationWarning:
datetime.datetime.utcnow() is deprecated and scheduled for removal
in a future version. Use timezone-aware objects to represent
datetimes in UTC: datetime.datetime.now(datetime.UTC).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit 2c5a82a29c (package/openssh: select linux-pam if refpolicy
upstream is selected) did not account for the linux-pam dependencies
before selecting it, causing unmet dependencies warnings (unfortunately,
not errors), such as:
$ KCONFIG_SEED=0xCF227CF4 make randconfig
WARNING: unmet direct dependencies detected for BR2_PACKAGE_LINUX_PAM
Depends on [n]: BR2_ENABLE_LOCALE [=n] && BR2_USE_WCHAR [=n] && !BR2_STATIC_LIBS [=n] && BR2_USE_MMU [=y] && BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 [=y]
Selected by [y]:
- BR2_PACKAGE_OPENSSH [=y] && BR2_USE_MMU [=y] && BR2_PACKAGE_REFPOLICY_UPSTREAM_VERSION [=y]
2c5a82a29c made the choice of having openssl bear the responsibility
to select linux-pam when the upstream refpolicy version was enabled.
Semantically however, the responsibility really lies within refpolicy
itself, since that's what imposes linux-pam to openssh.
Move the select to refpolicy and drop it from openssh. Then, ensure that
linux-pam is only selected when it is available.
That means that one may get an openssh that is not linked against
linux-pam, when the linux-pam dependencies are not met; refpolicy (by
way of libsepol) also has a more stringent requirement on gcc version
than linux-pam, so most probably the missing dependencies would be
locale, wchar, or a static build. We consider that situation to be a
corner case that we do not want to address.
In the future, we may have more similar situations, whereby refpolicy
would impose other packages be linked with otherwise optional
dependencies. If (when) that were (will be) the case, then the proposed
mechanism would quickly become ugly; we could then re-assess a nicer way
to do that. Until then, this is good ebough.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Adam Duskett <adam.duskett@amarulasolutions.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, when the version string is "too long", it is arbitrarily
truncated.
This works well for commit hashes, because usually the truncation is
long enough to provide a short hash that is still unique in the
upstream VCS.
However, there are non-hash-like versions strings that get truncated
and wihch the discriminant part is toward the end.
Yet, adapting the version cell to the widest versions string (most
probably a git hash) is not very interesting; the table is already very
large.
Make the cell with the version string scrollable: we get to keep the
best of both worlds: a narrow version cell, and a full-length version
string that can be copy-pasted if needed.
Signed-off-by: Sen Hastings <sen@hastings.org>
[yann.morin.1998@free.fr: reword commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following static build failure with libpsl raised since bump to
version 8.6.0 in commit 5cee6b6be6:
configure:28830: /home/autobuild/autobuild/instance-6/output-1/host/bin/aarch64_be-buildroot-linux-musl-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -static -Werror-implicit-function-declaration -Wno-system-headers -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I/home/autobuild/autobuild/instance-6/output-1/host/aarch64_be-buildroot-linux-musl/sysroot/usr/include -static -L/home/autobuild/autobuild/instance-6/output-1/host/bin/../aarch64_be-buildroot-linux-musl/sysroot/usr/lib -L/home/autobuild/autobuild/instance-6/output-1/host/aarch64_be-buildroot-linux-musl/sysroot/usr/lib conftest.c -lpsl -lmbedtls -lmbedx509 -lmbedcrypto -lz -latomic >&5
/home/autobuild/autobuild/instance-6/output-1/host/lib/gcc/aarch64_be-buildroot-linux-musl/11.4.0/../../../../aarch64_be-buildroot-linux-musl/bin/ld: /home/autobuild/autobuild/instance-6/output-1/host/bin/../aarch64_be-buildroot-linux-musl/sysroot/usr/lib/libpsl.a(psl.c.o): in function `is_public_suffix':
psl.c:(.text+0x2a8): undefined reference to `idn2_lookup_u8'
[...]
checking for library containing psl_builtin... no
configure: error: libpsl was not found
Fixes: 5cee6b6be6
- http://autobuild.buildroot.org/results/1fb15e1a99472c403d0d3b1a688902f32e78d002
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When selecting barebox in menuconfig, BR2_TARGET_BAREBOX_IMAGE_FILE will
be empty by default, which causes Buildroot to install whatever the
barebox-flash-image symlink points at for barebox versions >= v2012.10.0.
This is an outdated fallback, because barebox-flash-image is only valid
when the barebox build produces a single binary. Virtually all new
defconfigs added in the last couple of years are multiconfig
(CONFIG_PBL_IMAGE=y) however, meaning that a single imx_v7_defconfig
or multi_v8_defconfig will produce many images that support different
boards or even platforms.
As there is no single valid target for barebox-flash-image to point at
in this case, this symlink will point at a non-existing
'multi-image-build' to alert the user to this fact.
As replacement for barebox-flash-image, barebox commit 550cf79c216a
("Make list of flash images and fix link all single image cases") first
released with v2015.12.0 creates a barebox-flash-images file with a list
of all images built by barebox.
Have buildroot use that file as a fallback before trying
barebox-flash-image to have a fallback that works for any recent barebox
defconfig as well.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
tio needs threads since version 2.4 and
https://github.com/tio/tio/commit/93e6efc00153e625e4ceb8a51e01b324247d312a
resulting in the following build failure since bump to version 2.7 in
commit 4b33d7a47d:
In file included from /home/autobuild/autobuild/instance-7/output-1/host/riscv64-buildroot-linux-uclibc/sysroot/usr/include/stdio.h:27,
from ../src/tty.c:23:
/home/autobuild/autobuild/instance-7/output-1/host/riscv64-buildroot-linux-uclibc/sysroot/usr/include/features.h:218:5: warning: #warning requested reentrant code, but thread support was disabled [-Wcpp]
218 | # warning requested reentrant code, but thread support was disabled
| ^~~~~~~
../src/tty.c:43:10: fatal error: pthread.h: No such file or directory
43 | #include <pthread.h>
| ^~~~~~~~~~~
Fixes: 4b33d7a47d
- http://autobuild.buildroot.org/results/9b20ff06a0ad24b7e7f4750ebe64e2077e36164a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 36e635d2d5.
Python 3.12 is still causing too many build failures, so revert for 2024.02.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 687b96db4d.
Python 3.12 is still causing too many build failures, so revert for 2024.02.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Shortly before GCC 10.4.0 was dropped in d37a8f3a2, commit 4ce0dacb6 was
merged and introduced a patch to 10.4.0 that was not accounted for by
the patch that dropped 10.4.0 support.
Fixes: d37a8f3a2 ("package/gcc: remove gcc 10.x")
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit b9e89b340e (sudo: bump version) introduced the explicit build
of mksigname and mksiglist as host tools, as they were required to run
on the build machine, to generate C code then used to build the target
program.
This is now failing to build since the bump to sudo 1.9.15p5 in commit
c87746afef (package/sudo: security bump to version 1.9.15p5)
(lines manually wrapped and slightly elided for ease of reviewing):
/usr/bin/cpp \
-I/home/ymorin/dev/buildroot/O/master/per-package/sudo/host/include \
-I../../include \
-I../.. \
./sys_signame.h \
| /usr/bin/sed -e '1,/^int sudo_end_of_headers;/d' -e '/^#/d' > mksigname.h
In file included from /usr/include/features.h:394,
from /usr/include/sys/types.h:25,
from ./sys_signame.h:4:
/usr/include/features-time64.h:26:5: error: #error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
26 | # error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
| ^~~~~
/usr/bin/gcc -I../../include -I../.. -I. -I. \
-D_PATH_SUDO_CONF=\"/etc/sudo.conf\"
-I/home/ymorin/dev/buildroot/O/master/per-package/sudo/host/include \
-DDEFAULT_TEXT_DOMAIN=\"sudo\" \
-O2 \
-I/home/ymorin/dev/buildroot/O/master/per-package/sudo/host/include \
./mksigname.c -o mksigname
In file included from /usr/include/features.h:394,
from /usr/include/bits/libc-header-start.h:33,
from /usr/include/stdlib.h:26,
from ./mksigname.c:27:
/usr/include/features-time64.h:26:5: error: #error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
26 | # error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
| ^~~~~
make[2]: *** [Makefile:263: mksigname] Error 1
The core of the issue has not been really identified, but it turns out
that neither mksiglist nor mksignames is used during the build. This has
been tested with a minimal sudo with no option, and with a sudo with all
options enabled (linux-pam, zlib, opensldap, and openssl), with the
three types of C libraries (glibc, musl, and uClibc-ng).
Digging in the sudo buildsystem did not reveal an obvious reason when
those would be needed either.
Drop the hook now it seems it is no longer used and is atually breaking
the build.
Fixes: http://autobuild.buildroot.org/results/72f/72ff18fb9b41394a29006f881ee1fbea67a66a09/
Note that there is a second issue in there: the call to the host cpp
fails, but since it is on the LHS of a pipe, the error is lost, as the
RHS of the pipe (the sed call) succeeds; a fix for that will be sent
in a separate patch.
Reported-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Christian Stewart <christian@aperture.us>
Fixes the following security issues:
CVE-2023-40546 mok: fix LogError() invocation
CVE-2023-40547 - avoid incorrectly trusting HTTP headers
CVE-2023-40548 Fix integer overflow on SBAT section size on 32-bit system
CVE-2023-40549 Authenticode: verify that the signature header is in bounds.
CVE-2023-40550 pe: Fix an out-of-bound read in verify_buffer_sbat()
CVE-2023-40551: pe-relocate: Fix bounds check for MZ binaries
https://github.com/rhboot/shim/tree/15.8
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update patch to compile correctly with newer versions of GCC, which
has gotten stricter about the placement of the alignas() attribute.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[yann.morin.1998@free.fr: update .checkpackageignore]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following security issues:
https://wpewebkit.org/security/WSA-2024-0001.html
- CVE-2024-23222: Processing maliciously crafted web content may lead to
arbitrary code execution. Apple is aware of a report that this issue
may have been exploited. Description: A type confusion issue was
addressed with improved checks.
- CVE-2024-23206: A maliciously crafted webpage may be able to
fingerprint the user. Description: An access issue was addressed with
improved access restrictions.
- CVE-2024-23213: Processing web content may lead to arbitrary code
execution. Description: The issue was addressed with improved memory
handling.
Add an upstream post-2.42.5 patch to fix an issue with an invalid
backport causing a build issue.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Release notes from https://github.com/libts/tslib/releases :
This release includes libts version 0.10.5 and the following changes:
* new filter module: module crop
* some build and security fixes
* improved release procedure
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of waiting for a hardcoded time of 30s we check periodically every
second if the server is already up. If it isn't up after the full timeout
(which is the same as before) expired the test fails.
We need to redirect all output of the background started task to
/dev/null now as it otherwise confuses the emulator.run() exit code
parsing logic (as it gets out of order messages from the emulator).
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
yann.morin.1998@free.fr: simplify assert test]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Move comment in Config.in to end of file so that
BR2_PACKAGE_GOOGLE_BREAKPAD_TOOLS is properly idented.
Signed-off-by: Nuno Gonçalves <nunog@fr24.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
uClibc lacks process_vm_readv(), and sudo fails to build since commit
c87746afef (package/sudo: security bump to version 1.9.15p5), with
errors such as:
./exec_ptrace.c: In function ‘ptrace_write_vec’:
./exec_ptrace.c:895:9: error: ‘nwritten’ undeclared (first use in this function); did you mean ‘pwrite’?
895 | nwritten = ptrace_write_string(pid, strtab, vec[i]);
| ^~~~~~~~
| pwrite
Backport an upstream commit to fix the issue.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit c05f27c "configs/freescale_imx93evk: new defconfig", when
applied, added few ShellCheck fixups on top of the orginial
submission. During those changes, one extra backslash was added,
making the imx9-bootloader-prepare.sh fail.
This commit fixes the issue by removing this extra backslash.
Fixes:
dd: failed to open '/buildroot/output/images/u-boot-atf-container.img': No such file or directory
make: *** [Makefile:820: target-post-image] Error 1
Signed-off-by: Julien Olivain <ju.o@free.fr>
Reviewed-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Tested-By: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
$ utils/docker-run make check-package
board/freescale/imx93evk/patches/linux-headers/linux-headers.hash:3: empty line at end of file
board/freescale/imx93evk/patches/linux/linux.hash:3: empty line at end of file
402624 lines processed
2 warnings generated
make: *** [Makefile:1248: check-package] Error 1
Signed-off-by: Kadambini Nema <kadambini.nema@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The dependency comment must be shown when the platform has no ELE and
not when the platform has no VPU.
Fixes: 69d127fe29 ("package/freescale-imx/firmware-ele-imx: new package")
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Fix the following openssl static build raised since commit
80fa5672da:
/home/buildroot/autobuild/instance-0/output-1/host/lib/gcc/aarch64_be-buildroot-linux-uclibc/12.3.0/../../../../aarch64_be-buildroot-linux-uclibc/bin/ld: /home/buildroot/autobuild/instance-0/output-1/host/aarch64_be-buildroot-linux-uclibc/sysroot/lib/../lib64/libcrypto.a(libcrypto-lib-c_zlib.o): in function `zlib_oneshot_expand_block':
c_zlib.c:(.text+0xaec): undefined reference to `uncompress'
Commit b9a062b354 can also be reverted as
pkg-config will also retrieve -latomic to avoid the following build
failure:
/home/autobuild/autobuild/instance-1/output-1/host/lib/gcc/sparc-buildroot-linux-uclibc/10.4.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: /home/autobuild/autobuild/instance-1/output-1/host/sparc-buildroot-linux-uclibc/sysroot/usr/lib/libcrypto.a(threads_pthread.o): in function `CRYPTO_atomic_add':
threads_pthread.c:(.text+0x208): undefined reference to `__atomic_is_lock_free'
RSYNC_POST_CONFIGURE_HOOKS must be added to call reconfigure and avoid
the following build failure after autoreconf:
autoconf -o configure.sh
autoheader && touch config.h.in
configure.sh has CHANGED.
config.h.in is unchanged.
You may need to run:
make reconfigure
Fixes:
- http://autobuild.buildroot.org/results/6c1636f7556e7370a4c9f6d02c63cf3e20dc985c
- http://autobuild.buildroot.org/results/49abbaa1eab94b248bff434b40728065d687e278
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Disable neon with soft float to fix the following build failure raised
at least since version 2.19.1:
In file included from build/include/botan/internal/simd_32.h:27,
from src/lib/block/aes/aes_vperm/aes_vperm.cpp:15:
/home/thomas/autobuild/instance-1/output-1/host/lib/gcc/arm-buildroot-linux-musleabi/10.4.0/include/arm_neon.h:31:2: error: #error "NEON intrinsics not available with the soft-float ABI. Please use -mfloat-abi=softfp or -mfloat-abi=hard"
31 | #error "NEON intrinsics not available with the soft-float ABI. Please use -mfloat-abi=softfp or -mfloat-abi=hard"
| ^~~~~
Fixes:
- http://autobuild.buildroot.org/results/6b311e97484db2b0f8adbda140320d696713b1e0
- http://autobuild.buildroot.org/results/c309940ea6db0845d8221fb51611d0254222c644
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update U-Boot to version 2024.01 and kernel to 6.6.12.
In kernel 6.6 the arm32 i.MX device trees were placed into the
nxp/imx kernel directory, so adapt accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package provides firmware blobs for the Edgelock Secure
Enclave (ELE) [1] present on i.MX8ULP and i.MX9 Socs.
This version comes from the 6.1.55-2.2.0 release.
Since i.MX8ULP is not added to Buildroot yet, only support i.MX9.
[1] https://www.nxp.com/products/nxp-product-information/nxp-product-programs/edgelock-secure-enclave:EDGELOCK-SECURE-ENCLAVE
Reviewed-by: Gary Bisson <bisson.gary@gmail.com>
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
[Arnout:
- Introduce BR2_PACKAGE_FREESCALE_IMX_HAS_ELE instead of specific
dependencies.
- Drop BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX91A1, use
BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX91 instead.
- Don't use SCR.txt as license file (it's just an index file); instead,
use EULA.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This commit adds i.MX91 and i.MX93 support to Buildroot.
https://www.nxp.com/products/processors-and-microcontrollers/arm-processors/i-mx-applications-processors/i-mx-9-processors:IMX9-PROCESSORS
There is no i.MX95 software provided by NXP at the moment that's why
i.MX95 is left behind.
Adapt package firmware-imx for the LPPDR4 firmware binaries. The i.MX91
and i.MX93 only support LPDDR4 and LPDDR4x, but using different binaries
than i.MX8. For simplicity, use a completely separate code path for
i.MX91 and i.MX93, using the symbol
BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW_IMX9. There is only one type of
firmware supported, so there's no need for a choice or for selecting the
version (at least for now).
Reviewed-by: Gary Bisson <bisson.gary@gmail.com>
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
[Arnout:
- Remove BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX91A1 option.
- Re-wrap help text.
- Introduce BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW_IMX9 instead of
reusing BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW.
- Create completely separate instance of
FIRMWARE_IMX_INSTALL_IMAGE_DDR_FW for
BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW_IMX9.
- Drop the training binaries choice for IMX9.
- Drop the firmware version option for IMX9.
- Keep options for IMEM and DMEM padding.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Similar to the new fastapi test, instead of waiting for a hard coded
amount of time we can retry every second until the server is available
and abort if after the timeout we still didn't manage to connect.
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following failure in the install step of host-python3:
...
/usr/bin/install -c -m 644 pyconfig.h output/host/include/python3.12/pyconfig.h
[ERROR] _tkinter failed to import: output/build/host-python3-3.12.1/build/lib.linux-x86_64-3.12/_tkinter.cpython-312-x86_64-linux-gnu.so: undefined symbol: Tcl_AddErrorInfo
The following modules are *disabled* in configure script:
_ctypes_test _testbuffer _testcapi
_testclinic _testimportmultiple _testinternalcapi
_testmultiphase _xxtestfuzz xxsubtype
Following modules built successfully but were removed because they could not be imported:
_tkinter
Checked 110 modules (31 built-in, 54 shared, 15 n/a on linux-x86_64, 9 disabled, 0 missing, 1 failed on import)
...
/usr/bin/install -c -m 644 ./Lib/types.py output/host/lib/python3.12
/usr/bin/install: cannot stat 'Modules/_tkinter.cpython-312-x86_64-linux-gnu.so': No such file or directory
/usr/bin/install -c -m 644 ./Lib/typing.py output/host/lib/python3.12
make[3]: *** [Makefile:2068: sharedinstall] Error 1
...
Fixes: 36e635d2d5 ("package/python3: bump version to 3.12.1")
Signed-off-by: Roy Kollen Svendsen <roy.kollen.svendsen@akersolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When the elfutils package was first introduced, it filtered out
LFS-related compiler flags due to issues with the package's
implementation. This package has since evolved over the years to support
LFS (e.g. using `AC_SYS_LARGEFILE` [1]).
Filtering out `-D_FILE_OFFSET_BITS=64` can lead to a configuration error
when `BR2_TIME_BITS_64` is enabled:
checking whether gcc supports -Wl,-z,relro... yes
checking for __thread support... no
configure: error: __thread support required
...
With the configuration log providing the specific reason:
configure:7175: .../output-1/host/bin/m68k-buildroot-linux-gnu-gcc -o conftest -fPIC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_TIME_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_TIME_BITS=64 -shared -Wl,-z,defs -Wl,-z,relro -latomic -Wl,--build-id conftest.c >&5
In file included from .../output-1/host/m68k-buildroot-linux-gnu/sysroot/usr/include/features.h:394,
from .../output-1/host/m68k-buildroot-linux-gnu/sysroot/usr/include/bits/libc-header-start.h:33,
from .../output-1/host/m68k-buildroot-linux-gnu/sysroot/usr/include/stdlib.h:26,
from conftest.c:13:
.../output-1/host/m68k-buildroot-linux-gnu/sysroot/usr/include/features-time64.h:26:5: error: #error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
26 | # error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
| ^~~~~
configure:7175: $? = 1
...
Fixes:
- http://autobuild.buildroot.org/results/fbfe131673ed78999a07dbc879436e0ef6a8a1c0
[1]: https://sourceware.org/git/?p=elfutils.git;a=commit;h=3425454a10d307fae891fb667cf7969e945cde79
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Switch from distutils to setuptools to avoid the following build failure
raised since bump of python to version 3.12.1 in commit
36e635d2d5:
Traceback (most recent call last):
File "/home/fabrice/buildroot/output/build/libpwquality-1.4.5/python/setup.py", line 9, in <module>
from distutils.core import setup, Extension
ModuleNotFoundError: No module named 'distutils'
Fixes: 36e635d2d5
No autobuilder failures (yet)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with gcc >= 13:
In file included from /home/buildroot/autobuild/instance-3/output-1/build/uhd-4.3.0.0/host/lib/cal/database.cpp:7:
/home/buildroot/autobuild/instance-3/output-1/build/uhd-4.3.0.0/host/include/uhd/cal/database.hpp:86:24: error: 'uint8_t' was not declared in this scope
86 | static std::vector<uint8_t> read_cal_data(const std::string& key,
| ^~~~~~~
/home/buildroot/autobuild/instance-3/output-1/build/uhd-4.3.0.0/host/include/uhd/cal/database.hpp:14:1: note: 'uint8_t' is defined in header '<cstdint>'; did you forget to '#include <cstdint>'?
13 | #include <functional>
+++ |+#include <cstdint>
14 |
Fixes:
- http://autobuild.buildroot.org/results/cc52f2ed4fa43fe9c92713eb8561afcba29e12f3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit c10349bf67 (package:libselinux: replace PKG_PYTHON_DISTUTILS_ENV)
forgot to update a comment that refered to PKG_PYTHON_DISTUTILS_ENV.
Replace that now.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
gpg key generation can take longer than the default timeout on a
loaded or slow test host. The commit increase the timeout for the
key generation command to prevent the test to randomly fail.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Replace PKG_PYTHON_DISTUTILS_ENV by PKG_PYTHON_SETUPTOOLS_ENV as libdnet
uses setuptools instead of distutils since version 1.16.2 and
https://github.com/ofalk/libdnet/commit/4e4fc687953105b66bcc847a68869126ac3ec918
This will avoid the following build failure raised since commit
09de823cbc:
In file included from /home/fabrice/buildroot/output/per-package/libdnet/host/include/python3.12/Python.h:38,
from ./dnet.c:40:
/home/fabrice/buildroot/output/per-package/libdnet/host/include/python3.12/pyport.h:586:2: error: #error "LONG_BIT definition appears wrong for platform (bad gcc/glibc config?)."
586 | #error "LONG_BIT definition appears wrong for platform (bad gcc/glibc config?)."
| ^~~~~
Fixes: 09de823cbc
(No autobuilder failure (yet))
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Replace PKG_PYTHON_DISTUTILS_ENV by PKG_PYTHON_SETUPTOOLS_ENV as
libselinux uses setuptools instead of distutils since version 3.5 and
https://github.com/SELinuxProject/selinux/commit/2b5d5585754eb731a68158b613c7676fc3195ed9
This will avoid the following build failure raised since commit
09de823cbc:
In file included from /home/buildroot/autobuild/instance-0/output-1/per-package/libselinux/host/include/python3.12/Python.h:38,
from selinuxswig_python_wrap.c:168:
/home/buildroot/autobuild/instance-0/output-1/per-package/libselinux/host/include/python3.12/pyport.h:586:2: error: #error "LONG_BIT definition appears wrong for platform (bad gcc/glibc config?)."
586 | #error "LONG_BIT definition appears wrong for platform (bad gcc/glibc config?)."
| ^~~~~
Fixes: 09de823cbc
Fixes: http://autobuild.buildroot.org/results/3fbbb741de33310c8cacab753a32e79c5e531036
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure raised since the addition of the package
in commit 0a1f2fce04:
/home/autobuild/autobuild/instance-0/output-1/host/riscv64-buildroot-linux-uclibc/bin/ld.real: pty.o: in function `my_pty_fork':
pty.c:(.text+0x68): undefined reference to `fork'
/home/autobuild/autobuild/instance-0/output-1/host/riscv64-buildroot-linux-uclibc/bin/ld.real: filter.o: in function `.L0 ':
filter.c:(.text+0x134): undefined reference to `fork'
Fixes:
- http://autobuild.buildroot.org/results/0a3a68cfb181bc67a7dbf1d44f64b0a29df75987
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that we can specify that the default values for the CPE_ID variables
are valid, without having to actually set one (or more) to their
default, add a check-package check that validates that the CPE_ID
variables are indeed not set to their default.
It also validates that CPE_ID_VALID is not set when another CPE_ID
variable is set to a non-default value.
Add an anchor in the manual so that we can easily point to it.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that we document _CPE_ID_VALID, and that it shall be used instead of
setting a default value to one of the other _CPE_ID_* variables, change
all of the existing packages to use it, to avoid any error when we later
extend check-package to validate the sanity ofthe _CPE_ID_* variables.
Mechanical change done within the reference container, running the new
check in check-package, to report the CPE_ID errors:
$ make check-package 2>/dev/null \
|awk '{
split($(1), a, ":"); fname = a[1]
split($(2), a, "'\''"); val = a[2]
new_var = $(8); gsub("_CPE_ID_.*", "_CPE_ID_VALID", new_var)
printf("%s %s %s %s\n", fname, $(8), val, new_var)
}' \
|while read fname var val new_var; do
sed -r -i -e "s/${var}[[:space:]]*=[[:space:]]*${val}/${new_var} = YES/" "${fname}"
done
$ git diff -I'CPE_ID_(VENDOR|VALID)'
[empty]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The way we handle CPE_ID variable is unusual compared to the other
variables: we mostly compute defaults for all of them, and eventually
aggregate the various CPE_ID variables to form the CPE ID name.
However, we do not consider that CPE ID to valid, unless there is one
(or more) CPE_ID variables actually set by the package; this shows that
the CPE ID has been checked to be valid against the NVD CPE database. In
that situation, we internally define the duly undocumented _CPE_ID_VALID
variable.
However, it is totally possible (and very often the case) that the
default value we set to those variables are appropriate, and do defne a
valid CPE ID. In this case, the package will define any arbitrary CPE_ID
variable to its default value, usually by setting either the VENDOR or
PRODUCT field, though there is no rule or requirement that be the case.
This is not very clean, non-obvious, and does not allow for easily
adding checks in check-package.
Add the _CPE_ID_VALID variable to the manual, to make it official that
it should be used when the default values of the others are valid.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With recent asiidoc versions (at least 10.2.0 is known to report that),
rendering the manual yields a few warnings related to ordered lists:
asciidoc: WARNING: customize-quick-guide.adoc: line 13: list item index: expected 2 got 1
asciidoc: WARNING: customize-quick-guide.adoc: line 15: list item index: expected 3 got 1
[...]
asciidoc: WARNING: customize-quick-guide.adoc: line 65: list item index: expected 13 got 1
asciidoc: WARNING: customize-quick-guide.adoc: line 66: list item index: expected 14 got 1
asciidoc: WARNING: adding-packages-gettext.adoc: line 30: list item index: expected 2 got 1
asciidoc: WARNING: adding-packages-gettext.adoc: line 41: list item index: expected 3 got 1
The reason is that we use the same index to tell asciidoc to
automatically number items.
However, the official way to provide an automatic index is to write no
index:
https://docs.asciidoctor.org/asciidoc/latest/lists/ordered/
[...] since the numbering is obvious, the AsciiDoc processor will
insert the numbers for you if you omit them:
[...]
If you number the ordered list explicitly, you have to manually keep
the list numerals sequential. Otherwise, you will get a warning.
So, abide by the documentation, and drop the repeating indices to
ordered lists where we want automatic numbering.
Note that there is another ordered list, in adding-packages-directory.adoc,
but it does use explicit, sequential numbering. For consistency within
the whole document, we also convert it.
To avoid extra useless churn, the indentation of the items is not
changed to match the elided indices.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
phobosdpl is an old work email I don't really use anymore, so I'm
changing it to my personal email.
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The last Jailhouse tag is v0.12. It dates from 2020-02-04, which is
4 years old. This version no longer compiles with recent Kernels.
This commit updates Jailhouse to the latest commit e57d1ef, which
dates from 2023-01-10.
For commit logs, see:
https://github.com/siemens/jailhouse/commits/master/
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The jailhouse package installs files in the /usr/local prefix. This is
not convenient, because the jailhouse binary ends up in /usr/local/sbin,
which is not in the default Buildroot PATH. See [1]. Moreover, all
other Buildroot packages install files in /usr.
This is because the Buildroot package recipe does not set any prefix
value, and the upstream Jailhouse Makefile has a default to /usr/local.
See [2].
This commit sets the prefix value in the JAILHOUSE_MAKE_OPTS and also
updates other installation commands to put all the files in /usr.
[1] https://gitlab.com/buildroot.org/buildroot/-/blob/2023.11.1/system/Config.in#L495
[2] https://github.com/siemens/jailhouse/blob/v0.12/scripts/include.mk#L22
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following security issues:
https://webkitgtk.org/security/WSA-2024-0001.html
- CVE-2024-23222: Processing maliciously crafted web content may lead to
arbitrary code execution. Apple is aware of a report that this issue may
have been exploited. Description: A type confusion issue was addressed
with improved checks.
- CVE-2024-23206: A maliciously crafted webpage may be able to fingerprint
the user. Description: An access issue was addressed with improved access
restrictions.
- CVE-2024-23213: Processing web content may lead to arbitrary code execution.
Description: The issue was addressed with improved memory handling.
- CVE-2023-40414: Processing web content may lead to arbitrary code
execution. Description: A use-after-free issue was addressed with
improved memory management.
- CVE-2023-42833: Processing web content may lead to arbitrary code execution.
Description: A correctness issue was addressed with improved checks.
- CVE-2014-1745: Processing a file may lead to a denial-of-service or
potentially disclose memory contents. Description: The issue was
addressed with improved checks.
https://webkitgtk.org/security/WSA-2023-0012.html
- CVE-2023-42883: Processing a SVG image may lead to a denial-of-service.
Description: The issue was addressed with improved memory handling.
- CVE-2023-42890: Processing web content may lead to arbitrary code
execution. Description: The issue was addressed with improved memory
handling.
https://webkitgtk.org/security/WSA-2023-0011.html
- CVE-2023-42916: Processing web content may disclose sensitive information.
Apple is aware of a report that this issue may have been actively
exploited. Description: An out-of-bounds read was addressed with improved
input validation.
- CVE-2023-42917: Processing web content may lead to arbitrary code
execution. Apple is aware of a report that this issue may have been
actively exploited. Description: A memory corruption vulnerability was
addressed with improved locking.
Add an upstream post-2.42.5 patch to fix an issue with an invalid backport
causing a build issue.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 1edb9d691d (package/v4l2loopback: add
V4L2LOOPBACK_CPE_ID_VENDOR) added that variable, but set to its default
value.
This is however not required to define a valid CPE ID, as it also
defines a non-default CPE_ID_PREFIX.
Drop V4L2LOOPBACK_CPE_ID_VENDOR now.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The symmetric encryption test can sometimes take longer than the default
timeout. This commit increase the timeout to 10 seconds for that
command.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds support for the AVNET RZBoard V2L.
The board support creates a bootable sd card image. The board is
shipped with a u-boot inside its eMMC. The board support uses this
u-boot and does not build and deploy a u-boot onto the sd card.
Instead the sd card only contains a uEnv.txt, a kernel image and the
rootfs.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The petitboot UI looks much nicer in a Unicode locale:
* Items in the language selection submenu use multibyte Unicode
characters. In other locales, they say "Unable to display text in this
locale".
* The combination of TERM=linux with a UTF-8 locale is required to
trigger a special-case workaround in ncurses code[1]. Without
this, line-drawing characters in the menu look like q's.
Turn on wchar support in ncurses, and add a reminder that a UTF-8 locale
should be generated for things to look right.
[1] https://invisible-island.net/ncurses/ncurses.faq.html#no_line_drawing
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Normalize the order of arguments to $(INSTALL). Remove an unnecessary
pair of parentheses.
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The patch drops the file README.md from the license files. Indeed, the
licensing terms apply to third-party libraries that uuu links to, and
even though they are bundled in the source tree of uuu|mfgtools, they
are not used by Buildroot as we use the ones we build. Therefore, the
actual license file of the package is the file LICENSE.
Moreover, this also leads to simplifying the bump to new versions.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop no longer required python-setuptools runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
When the CVE lookup was added in commit
4a157be9ef, the starting year of the JSON
files was set to 2002. However, there are also CVEs from 1999, 2000 and
2001. It is not clear why these were skipped back then.
Set the start year to 1999 to capture these old CVEs too.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
NVD will deprecate the v1.1 API which allows us to download the full
database as individual JSON files. Instead, there's a horribly crappy
API that is extremely slow and subject to race conditions.
Fortunately, there is a project, Fraunhofer FKIE - Cyber Analysis and
Defense [1], that goes through the effort of adapting to this new API
and regenerating the convenient JSON files. The JSON files and meta
files are re-generated daily.
Instead of implementing the NVD v2 API, we decided to just use the JSON
files generatd by fkie-cad. That saves us the effort of solving the race
conditions, devising a cache mechanism that works, handling the frequent
gateway timeouts on the NVD servers, dealing with the rate limiting, and
keeping up with changes in the API.
Switch to this repository on github as NVD_BASE_URL. The file name is
also slightly different (CVE-20XX.json instead of nvdcve-1.1-20XX.json).
The fkie-cad repository compresses with xz instead of gz. Therefore:
- rename the filename variables to _xz instead of _gz;
- use xz as a subprocess because there is no xz decompressor in Python
stdlib.
[1] https://www.fkie.fraunhofer.de/en/departments/cad.html
Cc: Daniel Lang <dalang@gmx.at>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We currently check the CPE database to see if the CPE ID we use
(including the version) is already in the database.
However, the version part of the CPE ID is not actually used for CVE
matching. Instead, the CVEs have a range of versions associated with
them and we match against those ranges.
In addition, NVD is moving to a new API for accessing the CPE database.
It will not longer be possible to simply download all the CPE IDs, and
due to rate limiting, the download will have to be done in several
queries.
Since all of this is anyway of limited use, drop the CPE database lookup
entirely. Instead, as long as a CPE ID is defined in a package, it is
considered OK, without any checks.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The package/busybox/busybox-minimal.config is the default configuration
for MMU-less systems, so the setting is redundant and can be removed
without effect.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with aarch64 and BR2_OPTIMIZE_0 raised
since commit 0512910e49:
src/convert-neon-body-bayer8.inc.h: In function 'bayer2rgb_convert_neon':
src/convert-neon.c:233:17: error: third argument to '__builtin_prefetch' must be a constant
233 | __builtin_prefetch(((void const *)(_addr)) + 64, 0, (_lvl)); \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/convert-neon-body-bayer8.inc.h:8:9: note: in expansion of macro 'do_prefetch'
8 | do_prefetch(&in[+1*stride - 1], (rows_per_loop) < 3 ? 3 : 0);
| ^~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/307c1c448becd99dfba3a17b3ef816db0bb5cad6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
swugenerator might use openssl to encrypt files in .swu(cpio)
resulting output archive and gzip or zlib to compress the same files
but we're not sure whether build environment have or not openssl, gzip
and zlib installed so we add them as host dependencies.
Signed-off-by: Giulio Benetti <giulio.benetti+tekvox@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The meson upgrade from 1.1.1 to 1.2.0 have been reverted because
host-qemu (version v8.0.3) was searching libraries in the build machine
instead of buildroot host directory [1].
$ grep -r LINK_ARGS * | grep "\-L/usr"
build.ninja: LINK_ARGS =
-L/usr/lib/gcc/x86_64-linux-gnu/10 \
-L/usr/lib/gcc/x86_64-linux-gnu/10/../../../x86_64-linux-gnu -L/usr/lib/x86_64-linux-gnu \
-L/usr/lib/gcc/x86_64-linux-gnu/10/../../../../lib -L/usr/lib \
-L/lib/x86_64-linux-gnu \
-L/lib/../lib \
-L/usr/lib/../lib \
-L/usr/lib/gcc/x86_64-linux-gnu/10/../../.. \
-L/lib \
-I/[...]/host/include \
-L/[...]/host/lib \
-I/[...]/host/include/libfdt \
...
Upgrading qemu to version v8.1.0 solves the problem:
$ grep -r LINK_ARGS * | grep "\-L/usr"
build.ninja: LINK_ARGS =
-I/[...]/host/include \
-L/[...]/host/lib \
-I/[...]/host/include/libfdt \
...
Those two tests were done with the same buildroot version (2023.08) on
the same machine were the bug appeared. Using, git bisect, in this
environment, it was found that the problem was fixed in qemu by the
commit [2].
Thus, it is possible that the problem was introduced by improper use of
meson by qemu <= v8.0.3. Also, meson has been updated to version 1.2.1
and 1.3.0 in yocto and it doesn't seem to create any issue. [3]
The original problem is no longer present and some projects require
meson > 1.1.1 (e.g. rusticl requires meson 1.2.0 since mesa 23.3.0 and
meson 1.3.1 since mesa 24.0.0).
"pkgconfig" field is deprecated by meson 1.3.0 and replaced by
"pkg-config". See: [4]
The patch that adds the pkg_config_static property has been rebased.
[1] https://gitlab.com/buildroot.org/buildroot/-/commit/acfdf21f0b752e844a33c70a0fd2f82f4534a5a0
[2] https://gitlab.com/qemu-project/qemu/-/commit/Fc9a809e0d28417fa1e7f7efc19f845bda4c1be9
[3] https://github.com/yoctoproject/poky/commits/master/meta/recipes-devtools/meson
[4] https://mesonbuild.com/Release-notes-for-1-3-0.html#machine-files-pkgconfig-field-deprecated-and-replaced-by-pkgconfig
Signed-off-by: Antoine Coutant <antoine.coutant@smile.fr>
[yann.morin.1998@free.fr:
- keep our formatting in the patch
- reflow commit log (to keep busy while test-building!)
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
TestGlxinfo fail with a new runtime error:
# glxinfo -B -display :0
name of display: :0
traps: glxinfo[84] trap invalid opcode ip:b73c7027 sp:bf8433c0 error:0 in swrast_dri.so[b6e4c000+64f000]
Illegal instruction
The x86-core2 Bootlin toolchains are built for a core2 CPU [0],
this means that the Bootlin toolchains may use core2-specific
instructions.
The TestGlxinfo test is setup for BR2_x86_core2, so our
executables will also contain core2 instructions.
However, the default Qemu x86 is not guaranteed to emulate all the
instructions specific to core2, causing runtime issues as reported
above.
A similar issue has been fixed by adding Nehalem cpu emulation on
the qemu command line. See 4f565b5222 ("support/testing: use Nehalem
cpu emulation for TestGrubX8664EFI").
Set core2duo cpu emulation for TestGlxinfo on the qemu command line.
[0] https://gitlab.com/buildroot.org/toolchains-builder/-/blob/kubu/toolchain-builder-2023.08/configs/arch/x86-core2.config?ref_type=heads
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
mesa3d 23.3 added dri3_priv.h header and dri3_check_multibuffer() function in
drisw (part of swrast gallium driver) that can be build without dri3.
i686-buildroot-linux-gnu/bin/ld: src/glx/libglx.a.p/drisw_glx.c.o: in function `driswCreateScreenDriver':
drisw_glx.c:(.text.driswCreateScreenDriver+0x3a0): undefined reference to `dri3_check_multibuffer'
collect2: error: ld returned 1 exit status
Add HAVE_DRI3 guard around dri3_priv.h header and the zink code using
dri3_check_multibuffer().
While testing again the TestGlxinfo runtime test, a new unexpected error line
appeared in the glxinfo log:
MESA-LOADER: failed to open zink: /usr/lib/dri/zink_dri.so
mesa3d try to load zink gallium driver even if it was not enabled at
build time, indeed there is no such option in Buildroot.
Apply patches sent upstream:
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27478
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6093854455
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The defconfig choice is the default one, so it is redundant and can be
removed without effect.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 6b2329bb80 ("configs/ti_am64x_sk: new defconfig") forgot to
specify the Linux kernel version, so do that now.
When the defconfig was added, the default version was 6.4.x, so use
version 6.4.16.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes build issue of the python support with python 3.12 (2.3.4
unconditionally uses distutils).
The license file used being a header file, it has changed due to code
changes, but the license is still LGPL-3.0+.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 719921bebe (package/kexec: bump to version 2.0.27) forgot to
propagate the new dependency on kernel headers to petitboot, which may
select kexec, causing unmet dependencies warnings (unfortunately, not
errors), such as:
$ KCONFIG_SEED=0x84462FFC make randconfig
WARNING: unmet direct dependencies detected for BR2_PACKAGE_KEXEC
Depends on [n]: BR2_PACKAGE_KEXEC_ARCH_SUPPORTS [=y] && BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_17 [=n]
Selected by [y]:
- BR2_PACKAGE_PETITBOOT [=y] && (BR2_PACKAGE_KEXEC_ARCH_SUPPORTS [=y] || BR2_PACKAGE_KEXEC_LITE_ARCH_SUPPORTS [=n]) && BR2_USE_MMU [=y] && BR2_USE_WCHAR [=y] && !BR2_STATIC_LIBS [=n] && BR2_TOOLCHAIN_HAS_THREADS [=y] && BR2_PACKAGE_HAS_UDEV [=y] && !BR2_PACKAGE_KEXEC_LITE_ARCH_SUPPORTS [=n]
Propagate the dependency from kexec, and add comments about dependencies
also inherited from kexec-lite.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, the comment about availability is between the package main
symbol and its suboptions, breaking the threading in menuconfig.
Invert the order, and move the comment last. Also enclose the suboptions
between an if-block, as it is more customary.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, the makedevs syntax explanations are duplicated: one in
the package directory, which was introduced firat but bit-rotted for
a while each time the makedevs was updated, and once in the manual,
which lagged much less. As for all duplicated documentation, the two
diverged and one was not updated.
In commit 738fb6dfa4 (docs/manual: extend makedev syntax section),
we recently updated the makedevs syntax description, but that indeed
missed the old README.
Get rid of the README and replace it with a symlink to the manual
makedevs section.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The gstreamer plugin select the EGL backend of gst1-plugins-base, but
forgot to propagate all of its dependencies, notably the _HAS_API
condition, causing unmet dependencies warnings (unfortunately, not
errors), such as;
$ KCONFIG_SEED=0x597D22A8 make randconfig
WARNING: unmet direct dependencies detected for BR2_PACKAGE_GST1_PLUGINS_BASE_LIB_OPENGL_EGL
Depends on [n]: BR2_PACKAGE_GSTREAMER1 [=y] && BR2_PACKAGE_GST1_PLUGINS_BASE [=y] && BR2_PACKAGE_GST1_PLUGINS_BASE_LIB_OPENGL [=y] && BR2_PACKAGE_GST1_PLUGINS_BASE_LIB_OPENGL_HAS_API [=n] && BR2_PACKAGE_HAS_LIBEGL [=y]
Selected by [y]:
- BR2_PACKAGE_IVI_HOMESCREEN_GSTREAMER_EGL_PLUGIN [=y] && BR2_PACKAGE_IVI_HOMESCREEN [=y] && BR2_PACKAGE_FFMPEG_ARCH_SUPPORTS [=y] && BR2_PACKAGE_HAS_LIBEGL [=y]
We can't select _HAS_API, because it is a symbol that represents a
capability provided by other features of gst1-plugins-base; it's
semantically like a virtual package: we can't select it, we can only
depend on it.
Add this dependency to fix this situation.
This however causes circular (recursive) dependencies errors:
package/gstreamer1/gst1-plugins-base/Config.in:135:error: recursive dependency detected!
package/gstreamer1/gst1-plugins-base/Config.in:135: symbol BR2_PACKAGE_GST1_PLUGINS_BASE_LIB_OPENGL is selected by BR2_PACKAGE_IVI_HOMESCREEN_GSTREAMER_EGL_PLUGIN
package/ivi-homescreen/Config.in:221: symbol BR2_PACKAGE_IVI_HOMESCREEN_GSTREAMER_EGL_PLUGIN depends on BR2_PACKAGE_GST1_PLUGINS_BASE_LIB_OPENGL_HAS_API
package/gstreamer1/gst1-plugins-base/Config.in:149: symbol BR2_PACKAGE_GST1_PLUGINS_BASE_LIB_OPENGL_HAS_API is selected by BR2_PACKAGE_GST1_PLUGINS_BASE_LIB_OPENGL_OPENGL
package/gstreamer1/gst1-plugins-base/Config.in:152: symbol BR2_PACKAGE_GST1_PLUGINS_BASE_LIB_OPENGL_OPENGL depends on BR2_PACKAGE_GST1_PLUGINS_BASE_LIB_OPENGL
Indeed, _HAS_API is only even set when gstreamer1, gst1-plugins-base,
and the gst1-plugins-base's lib-opengl support, are all already enabled.
As such, the dependency on _HAS_API already implies those, and there is
no need to select them.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Adam Duskett <adam.duskett@amarulasolutions.com>
Reviewed-by: Adam Duskett <Adam.Duskett@amarulasolutions.com>
Tested-by: Adam Duskett <Adam.Duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Born as a project to read/write the bootcount on the TI am3xx platform,
over time it has introduced bootcount management on EEPROM and for the
stm32mp1 platform. As a result, the project removed the 'davinci' tag
from its name and GitHub link.
The patch aligns the package name in Buildroot with the current one on
GitHub.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[Peter: extend/rework legacy handling]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We recently added support for building a bare-metal toolchain, and the
autobuilders are therefore trying to build such toolchains. However,
by default the BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH option is
empty, causing the target tuple to be empty, and therefore
host-gcc-bare-metal tries to build a toolchain for the target
"x86_64-pc-linux-gnu", which isn't a bare-metal target, and fails
badly.
In order to properly test this bare-metal support, this commit adjusts
the genrandconfig script so that it injects a valid target
architecture tuple.
Fixes:
http://autobuild.buildroot.net/results/6cb1514b19bfe056fb984d3538bdccdda5e174c1/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 4b8fddb060 ("configs/ti_am62x_sk: new defconfig) forgot to
specify the Linux kernel version, so do that now.
When the defconfig was added, the default version was 6.4.x, so use
version 6.4.16.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[Romain:
use BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_4 as suggested
by Giulio Benetti]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Commit
c6ab9328e1 ("boot/arm-trusted-firmware:
change BR_NO_CHECK_HASH_FOR logic") was written too hastily, and is
actually broken as it does the reverse of what it should do. It really
should disable the check when we're using a custom version/git/tarball
of TF-A, not the opposite.
Thanks to Romain for pointing out the problem, and providing an IRL
patch to solve the issue.
Reported-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This toolset was designed to facilitate the testing, monitoring, and
tracing of various things with virtual memory, pages, and slab objects.
It is an invaluable resource for identifying and analyzing
memory-related issues, such as leaks and bottlenecks, and can greatly
enhance one's understanding of memory utilization within a system.
The mm toolset includes:
- page_owner_sort: userspace helper to sort the output of
/sys/kernel/debug/page_owner, which helps to know who allocates
the page from kernel context
- slabinfo: the tool which gets reports about slabs, for example
show empty slabs, modify of slab debug options at runtime, display
all information about a slabcache
- page-types: a handy tool for querying page flags
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
[yann.morin.1998@free.fr:
- don't depend on linux, already a patch dependency
- don't set CC: default is based on CROSS_COMPILE
- no need to fully recheck at install time
- move the option for alphabetical ordering
- fix check-package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Patrick Oppenlander <patrick.oppenlander@gmail.com>
[Peter: Fix check-package warnings, move to "Shell and utilities" and add
DEVELOPERS entry]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following musl build failure raised since bump to version 1.6.0
in commit 7794fa4c4e:
pam_namespace.c: In function 'process_line':
pam_namespace.c:649:41: error: 'SIZE_MAX' undeclared (first use in this function)
649 | if (count > UINT_MAX || count > SIZE_MAX / sizeof(uid_t)) {
| ^~~~~~~~
pam_namespace.c:41:1: note: 'SIZE_MAX' is defined in header '<stdint.h>'; did you forget to '#include <stdint.h>'?
40 | #include "argv_parse.h"
+++ |+#include <stdint.h>
41 |
Fixes:
- http://autobuild.buildroot.org/results/f07360f33010a2cf19aace266faae14a834bd9a4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
uImage is almost deprecated so let's switch to zImage. Let's also bump
Linux version to 6.1.44, U-Boot to 2023.07 and remove
BR2_TARGET_UBOOT_NEEDS_PYTHON3 since it's selected by
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Note that we do not document the special flit-bootstrap value, as it
is considered an internal implementation detail, and shouldn't
normally be used by packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Python 3.12.1 has removed distutils support. As such, we remove the distutils
option from pkg-python.mk as well.
Tested on Fedora 39, and Debian 11. All 68 package tests pass.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
All Python packages have been migrated to a different setup type, and
we're about to bump to Python 3.12 which no longer supports distutils,
so let's drop support for distutils in our python-package
infrastructure.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[Thomas: also update the Buildroot manual]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The current package has not recieved an update since Sat Oct 9 2021
33ece2446e and is not python 3.12 compatible.
Furthermore, the current version requires at least 42 new packages worth of
depedencies of which several require patches to be python 3.12 compatible.
As nobody has stepped up to maintain the package and its ever-growing list of
dependencies, along with the other problems, it is time to drop the package.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The python-pygame package has not recieved any update since
Sun May 1 22:15:17 2016 (commit: a9ec96e545)
Also, this package no longer builds properly against python 3.12.0. Receiving
the following error when building:
```
src/surface.c:2812:14: error: invalid type argument of unary ‘*’ (have
‘int’)
2812 | ch = *PyUnicode_AS_UNICODE (obj);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
src/surface.c: In function ‘PySurface_Blit’:
```
If someone wants to re-introduce this package at a later date they are more
than welcome to do so!
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libressl dropped engine support since version 3.8.1 resulting in the
following build failure since bump of libressl to version 3.8.2 in
commit 21eca49ed5:
eng_front.c: In function 'IMPLEMENT_DYNAMIC_CHECK_FN':
eng_front.c:262:1: error: expected declaration specifiers before 'IMPLEMENT_DYNAMIC_BIND_FN'
262 | IMPLEMENT_DYNAMIC_BIND_FN(bind_fn)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/389ed112f082a4917f777f3e236211059c4c6d6e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Security fixes:
- CVE-2023-52425: Fix quadratic runtime issues with big tokens that can
cause denial of service, in partial where dealing with compressed XML
input. Applications that parsed a document in one go -- a single call
to functions XML_Parse or XML_ParseBuffer -- were not affected. The
smaller the chunks/buffers you use for parsing previously, the bigger
the problem prior to the fix.
- CVE-2023-52426: Fix billion laughs attacks for users compiling
*without* XML_DTD defined (which is not common). Users with XML_DTD
defined have been protected since Expat >=2.4.0 (and that was
CVE-2013-0340 back then).
https://blog.hartwork.org/posts/expat-2-6-0-released/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The custom kernel used for the Rock5B features an FIQ debug
interface which is enabled by default. As it is not needed, it is
disabled. The documentation features instructions on how to
re-enable it, if it is needed.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Search the external trees for package files and add them to the list.
The list of directories walked and excluded are the same as for the main
tree, and should work out of the box if the user sticks to the directory
structure suggested in the manual.
Two additional properties were added to the Package class, the tree name and
the path. For consistency and to simplify the code, packages in the main tree
are marked as coming from "BR2".
The HTML output has a new column listing the external name (or "BR2") and the
json output has a new property "tree".
Signed-off-by: Juan Carrano <juan.carrano@ebee.berlin>
[Arnout:
- fix flake8 error "'itertools' imported but unused";
- use str.split instead of str.partition;
- use BR2_EXTERNAL_BUILDROOT_PATH instead of BR2_EXTERNAL_BR2_PATH;
- remove pkgdir variable, instead use self.pkgdir.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
[yann.morin.1998@free.fr: make it explicit it is not the official way]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds a new package for building newlib for a bare-metal toolchain.
The cpu architecture is defined by a toolchain-bare-metal virtual package.
While any cpu architecture could be used, the default configuration will be a
Xilinx microblaze little endian architecture, so that buildroot will be able
to build the microblaze firmware applications for zynqmp and versal.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a new package for building gcc for a bare-metal toolchain.
The cpu architecture is defined by a toolchain-bare-metal virtual package.
While any cpu architecture could be used, the default configuration will be a
Xilinx microblaze little endian architecture, so that buildroot will be able
to build the microblaze firmware applications for zynqmp and versal.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a new package for building binutils for a bare-metal toolchain.
The cpu architecture is defined by a toolchain-bare-metal virtual package.
While any cpu architecture could be used, the default configuration will be a
Xilinx microblaze little endian architecture, so that buildroot will be able
to build the microblaze firmware applications for zynqmp and versal.
In order to build the zynqmp pmufw and versal plm applications without error,
binutils version 2.41 or higher is required.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a new virtual package for adding a bare-metal
toolchain to Buildroot. For now, it depends on nothing, so it will not
actually build anything, but it defines some options that will be
needed by the various packages that will be part of this toolchain
build process.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The assumption is that updates to the stable branch should not break anything,
so we use the latest LTS rather than a specific version.
Signed-off-by: Marleen Vos <marleen.vos@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The assumption is that updates to the stable branch should not break anything,
so we use the latest LTS rather than a specific version.
Signed-off-by: Marleen Vos <marleen.vos@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Patch 0001-feat-build-add-support-for-new-binutils-versions.patch as
found in v2.8 patch dir has already been applied in lts-v2.8.13
Patch 0002-build-tools-avoid-unnecessary-link.patch from v2.8 has
been included as 0001-build-tools-avoid-unnecessary-link.patch for
lts-v2.8.13
Signed-off-by: Marleen Vos <marleen.vos@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, arm-trusted-firmware checks the hash only if
BR2_TARGET_ARM_TRUSTED_FIRMWARE_LATEST_VERSION=y. As we're about to
introduce other version options for which the hash checking is needed,
let's reverse the logic, and instead ignore hash checking if we're
using a custom version or custom git or custom tarball.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The #buildroot IRC channel recently changed from only allowing
registered users to join to allowing anyone to join but only allowing
registered users to talk in the channel. This still avoids the spam
problem on IRC while allowing an exception for users bridged from
matrix.org. These already have a username registered on the matrix side
and thus similar properties as a registered IRC user/nick.
The commands to set these options were:
* Set +q on all unregistered nicks: ~/mode #buildroot +q $~a~ this lets
people join but they can't talk
* Set exempt on matrix hosts: ~/mode #buildroot +e $x:matrix.org~
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
[yann.morin.1998@free.fr: the default is an interactive shell]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
check-package does a lot more by now than checking .mk and
Config.in files. Add this to the description.
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Migrate from setuptools to hatchling pep517 build backend.
Drop no longer required python-setuptools runtime dependency.
Drop no longer required python-six runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
pkg-cargo currently sets the --release flag unless BR2_ENABLE_DEBUG is
set. However, this does not accurately reflect the configured build
settings. In addition, it only works for packages that use the cargo
infrastructure directory and not with packages using the cargo
environment indirectly, such as pyo3 based python packages. To support
these, we really want to pass the necessary flags in PKG_CARGO_ENV.
In order to accurately reflect the configured build settings
(optimization and debug levels), we set the appropriate environment
variables according to the global settings.
There is no way to specify the profile to use through an environment
variable, it has to be set through a cargo flag like --release. Since we
can't easily control the profile flags used by non-cargo package
infrastructures, we instead set the env variables for both root profiles
(dev/release). For the aspects that are not affected by the global
settings (incremental, codegen-units, split-debuginfo), we set them
equal to the default for release - which in our context is the
appropriate choice even when BR2_ENABLE_DEBUG is set.
For reference the default cargo root profile settings are:
https://doc.rust-lang.org/cargo/reference/profiles.html#default-profiles
Cc: Moritz Bitsch <moritz@h6t.eu>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Tested-by: Moritz Bitsch <moritz@h6t.eu>
Tested-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Reviewed-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
glm did not install headers since [1], at least in a per-package
build. Bumping to 1.0.0 fixes that.
The cmake option to avoid building the lib has changed
Partially fixes [2], where cegui failed to configure because of
the missing glm headers.
It also fixes kodi-screensaver and kodi-visualisation (no autobuidl
failures so far):
CMake Error at [...]/output/per-package/kodi-screensaver-asteroids/host/share/cmake-3.28/Modules/FindPackageHandleStandardArgs.cmake:230 (message):
Could NOT find glm (missing: GLM_INCLUDE_DIR)
[1] 01ad113 package/glm: bump to version 0.9.9.8
[2] http://autobuild.buildroot.org/results/241/241a60f8ecb6fec5dc122d64dd438dd4249f8c3e/
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
[yann.morin.1998@free.fr: add kodi failures from Bernd]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Patch 0001-build-tools-avoid-unnecessary-link.patch that was applied to
v2.9 is already in v2.10, so no new patch dir for v2.10 is added
Signed-off-by: Marleen Vos <marleen.vos@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- v2.6 changes to FIP instead of SSBL boot.
- This requires switching to u-boot.bin in U-Boot, and using that
instead of .stm32 in ATF.
- fiptool expects dtb to be split off from u-boot.bin, so need custom
u-boot-nodtb.bin in addition to u-boot.dtb.
Caveat: this is perhaps not really obligatory, but the ATF
documentation explains it like that.
- The partition must be named fip (while it must be named ssbl for
SSBL boot).
- Since the partition name is set in the common template, all
defconfigs using that template must be bumped in a single commit
- ATF now produces both fip.bin and <boardname>.stm32, so fip.bin has
been added to the configs
- While we're at it, add the structuring comments to
avenger96_defconfig similar like the other defconfigs
Signed-off-by: Marleen Vos <marleen.vos@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The regex was a bit too strict in which characters it allowed. Thus,
if e.g. a file name appears in the
BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES string, it no
longer matches, and we end up with an empty ATF_VARIABLES. This makes
the subsequent grep fail, and the post-image.sh script fails without
any error message (thanks to the -e option).
Simplify the regex to match everything except the closing quotation
mark. Note that Kconfig doesn't allow quotation marks at all inside a
string (even escaped ones), so this regular expression is always OK.
Signed-off-by: Marleen Vos <marleen.vos@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The buildroot manual says this kind of commit should be done together
with the actual changes made to a config/board. But since a number of
changes will follow for some boards and configs, it seemed more
logical to make a separate commit for this.
Signed-off-by: Marleen Vos <marleen.vos@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a runtime test for fastapi. Use uvicorn as the asgi server
application as does the fastapi hello world example [1].
Fastapi depends on PydanticV2 now which is written in rust so we need to
run the test on armv7.
[1] https://fastapi.tiangolo.com/tutorial/first-steps/
Signed-off-by: Marcus Hoffmann <bubu@bubu1.eu>
[Arnout:
- fix flake8 errors
support/testing/tests/package/sample_python_fastapi.py:5:1: E302 expected 2 blank lines, found 1
support/testing/tests/package/sample_python_fastapi.py:8:1: W391 blank line at end of file
- Remove BR2_CCACHE (as requested by Marcus).
- Add a comment explaining that this also tests uvicorn and pydantic.
- Re-try wget in a loop instead of a fixed timeout of 30 seconds.
- Add a DEVELOPERS entry.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Uvicorn has a hard requirement on the python ssl module. Without it even
running uvicorn --help fails.
Signed-off-by: Marcus Hoffmann <bubu@bubu1.eu>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Drop no longer required dependency on python-anyio. Note that
python-starlette still depends on anyio, but there's no direct
dependency from fastapi any more.
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The section of the manual describing the makedev syntax is not
up-to-date with the current features, and does not properly describe
existing ones.
- extend the list of types with the requirements on the existence of
the target file or directory; for 'c', 'b', and 'p', the existence
requirement is inherited from mknod(2):
ERRORS
...
ENOENT A directory component in pathname does not exist or is a
dangling symbolic link.
for the other types, the existence requirements are extracted from
the source of makedev.c;
- format the types flags, so they are rendered in monospace;
- extend the 'mode' description, as it can be set to -1 for 'f', 'd',
or 'r', so that only the uid and gid are set. This is most useful
for 'r', where setting the same mode recursively for all the
sub-directories and files alike does not really make sense; indeed
in this case, the modes are usually set correctly when the package
(or rootfs overlay) installs the files, and only the uid and gid are
interesting to set;
- extend and update the examples to show-case the -1 mode use-case.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump qemu_arm_ebbr_defconfig and qemu_aarch64_ebbr_defconfig in sync:
- Bump Linux to v6.6.11
- Bump U-Boot to 2024.01
- Bump TF-A to v2.10
While at it, adapt Qemu command line arguments to avoid a warning when
disabling ACPI.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The yjit feature requires rust toolchain support, since we don't
currently handle setting up the rust toolchain for ruby lets disable
this feature for now.
This broke when ruby was bumped to version 3.3.0 in buildroot commit
a01c278df7.
Fixes:
linking static-library libruby-static.a
LLVM ERROR: Invalid encoding
make[2]: *** [Makefile:318: libruby-static.a] Aborted
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
cpe:2.3:a:green_end:sftpserver has been deprecated in favor of
cpe:2.3:a:greenend:sftpserver in December 2022:
<cpe-item name="cpe:/a:green_end:sftpserver:0.2.2" deprecated="true" deprecation_date="2022-12-30T17:53:22.797Z">
<reference href="https://github.com/ewxrjk/sftpserver/releases">Version</reference>
<reference href="http://www.greenend.org.uk/rjk/sftpserver/">Product</reference>
<cpe-23:cpe23-item name="cpe:2.3:a:green_end:sftpserver:0.2.2:*:*:*:*:*:*:*">
<cpe-23:deprecated-by name="cpe:2.3:a:greenend:sftpserver:0.2.2:*:*:*:*:*:*:*" type="NAME_CORRECTION"/>
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Under some conditions (mostly slow execution due to test host load),
the netcat runtime test can randomly fail. This is due to several
facts:
- the sleep time between the server and client is too short,
- the use of netcat option -c could close the connection before the
server could receive all the data.
This commit improves the test robustness by increasing the sleep time,
and by reducing the amount of transferred data (from 1MB of random data,
to a simpler string of few bytes). Also, to make sure netcat cannot wait
on DNS resolution, this commit also adds the -n option.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6093854664
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
For details, see https://github.com/troglobit/watchdogd/releases/tag/4.0
- Major feature upgrade, command line and .conf files compatible
- LICENSE hash update due to update in copyright years
- Enabling system monitor plugins have changed syntax upstream. The
`--with-foo=SECONDS` is now just `--with-foo`
This last upstream change require converting affected Config.in options
from int -> bool. Legacy _WRAP:ers have been added to Config.legacy.in,
modeled on BR2_TARGET_ROOTFS_EXT2_BLOCKS.
Forcibly disable new monitors; they'll be enabled in a followup commit.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
[yann.morin.1998@free.fr:
- forcibly disable new monitors
- minor tweaks in Config.in.legacy
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 4b6202f721 set
LIBCURL_CPE_ID_PRODUCT to libcurl but this is not needed as
LIBCURL_CPE_ID_PRODUCT will be set to the package name
(i.e. libcurl) by default
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: Antoine Coutant <antoine.coutant@smile.fr>
Commit 35af2bb801 set
CONTAINERD_CPE_ID_PRODUCT to containerd but this is not needed as
CONTAINERD_CPE_ID_PRODUCT will be set to the package name
(i.e. containerd) by default
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: Antoine Coutant <antoine.coutant@smile.fr>
While the list of licenses is present in the show-info output, the list
of license files and the redistributable status were missing. Add them.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Disable lua bindings to avoid the following build failure if host-lua
and lua are built before brltty raised since bump to version 6.5 in
commit 82c6e87d5e and
https://github.com/brltty/brltty/commit/42bf48ca010d9163652cb0a014662fa243132736:
configure: lua package: lua
configure: lua includes:
configure: lua libs: -L/home/autobuild/autobuild/instance-0/output-1/host/bin/../sparc64-buildroot-linux-gnu/sysroot/usr/lib -llua -lm -ldl
checking for lua5.4... no
checking for lua... /home/autobuild/autobuild/instance-0/output-1/host/bin/lua
configure: Lua shell: /home/autobuild/autobuild/instance-0/output-1/host/bin/lua
configure: Lua library directory: /home/autobuild/autobuild/instance-0/output-1/host/lib/lua/5.3
[...]
/usr/bin/install -c -d /home/autobuild/autobuild/instance-0/output-1/target/home/autobuild/autobuild/instance-0/output-1/host/lib/lua/5.3
/usr/bin/install -c -s --strip-program /bin/true brlapi.so /home/autobuild/autobuild/instance-0/output-1/target/home/autobuild/autobuild/instance-0/output-1/host/lib/lua/5.3
make[3]: Leaving directory '/home/autobuild/autobuild/instance-0/output-1/build/brltty-6.6/Bindings/Lua'
[...]
brltty: installs files in /home/autobuild/autobuild/instance-0/output-1/target//home/autobuild/autobuild/instance-0/output-1
While at it, disable emacs bindings which have also been added in
version 6.5 with
https://github.com/brltty/brltty/commit/64a487e29941df54796645229a872ecbe2a06bfe
Fixes:
- http://autobuild.buildroot.org/results/f424e6727bbe61ea4b7703e93aae6fcab7506898
- http://autobuild.buildroot.org/results/bf4a161fc66fb99a24f08bea3436b13738f2e383
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
package/wlroots/0001-Add-feature-macros-to-more-C-files-.patch has been
rejected upstream, and the initial pull request was moved to the
freedesktop gitlab. Update the patch to reflect these changes.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Without the vulkan-loader package present, the configure step fails with the
following error message:
```
Run-time dependency vulkan found: NO (tried pkgconfig and system)
Message: Install "vulkan" or pass "-Dvulkan=disabled" to disable it.
```
The above error is due to the lack of the vulkan.pc file provided by the
vulkan-loader package. A search of autobuild failures containing
BR2_PACKAGE_WLROOTS=y and BR2_PACKAGE_MESA3D_VULKAN_DRIVER=y shows two build
failures. However, the failure reasons happened before wlroots could compile.
One for gerbera-1.10.0 and another for host-rust-1.64.0.
Add a dependency on the vulkan-loader package to resolve the above issue.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Enable the flutter-pi vulkan option if a suitable driver is enabled.
Currently, only Mesa provides Vulkan drivers. As such, gating the
feature behind the BR2_PACKAGE_MESA3D_VULKAN_DRIVER option is
reasonable at the moment and is done by three other packages already:
flutter-engine, ivi-home screen, and wlroots.
Furthermore, a dependency on BR2_PACKAGE_VULKAN_LOADER is needed as the
vulkan-loader package provides the vulkan.pc file, which the configure step
relies upon.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following grpc build failure raised since bump of libabseil-cpp
to version 20230802.1 in commit
aea790392a:
configure:25127: checking grpc++/grpc++.h usability
configure:25127: /home/buildroot/autobuild/instance-0/output-1/host/bin/sparc64-linux-g++ -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O1 -g0 -D_FORTIFY_SOURCE=2 -std=c++11 -DNOMINMAX -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.cpp >&5
In file included from /home/buildroot/autobuild/instance-0/output-1/host/sparc64-buildroot-linux-gnu/sysroot/usr/include/absl/base/config.h:86,
from /home/buildroot/autobuild/instance-0/output-1/host/sparc64-buildroot-linux-gnu/sysroot/usr/include/absl/base/const_init.h:25,
from /home/buildroot/autobuild/instance-0/output-1/host/sparc64-buildroot-linux-gnu/sysroot/usr/include/absl/synchronization/mutex.h:67,
from /home/buildroot/autobuild/instance-0/output-1/host/sparc64-buildroot-linux-gnu/sysroot/usr/include/grpcpp/impl/codegen/sync.h:32,
from /home/buildroot/autobuild/instance-0/output-1/host/sparc64-buildroot-linux-gnu/sysroot/usr/include/grpcpp/completion_queue.h:41,
from /home/buildroot/autobuild/instance-0/output-1/host/sparc64-buildroot-linux-gnu/sysroot/usr/include/grpcpp/channel.h:25,
from /home/buildroot/autobuild/instance-0/output-1/host/sparc64-buildroot-linux-gnu/sysroot/usr/include/grpcpp/grpcpp.h:52,
from /home/buildroot/autobuild/instance-0/output-1/host/sparc64-buildroot-linux-gnu/sysroot/usr/include/grpc++/grpc++.h:26,
from conftest.cpp:167:
/home/buildroot/autobuild/instance-0/output-1/host/sparc64-buildroot-linux-gnu/sysroot/usr/include/absl/base/policy_checks.h:79:2: error: #error "C++ versions less than C++14 are not supported."
79 | #error "C++ versions less than C++14 are not supported."
| ^~~~~
[...]
grpc . . . . . . . . no (libgrpc++ not found) (dependency error)
[...]
configure: error: "Some plugins are missing dependencies - see the summary above for details"
Fixes:
- http://autobuild.buildroot.org/results/e2cf909ab3c356f1881fd18cfa039e87faa10d7d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- drops support for proto2
- fixes compatibility with protobuf >= 22.0 (which we did not yet bump)
- to be compatible with new protobuf versions c++17 is now required
when building with protoc (which we only do for the host package) [0]
hence require host gcc >= 7 for c++17 support, propagate to
depending packages
- the license file has changed with a change of the copyright years,
nothing else
[0] https://github.com/protobuf-c/protobuf-c/pull/673
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Before commit ca63464e37 (package/python-numpy: bump to version
1.25.0), numpy was using python distuils. Then, the default for BLAS and
LAPACK detection was to disable support if they were not found, even
when OPENBLAS is installed on the host system.
Commit ca63464e37 switched python-numpy to use the meson-package
infrastructure, where the default has changed, and now fails when the
host system does have OPENBLAS installed:
buildroot$ make
>>> host-python-numpy 1.25.0 Configuring
[...]
Run-time dependency openblas found: NO (tried pkgconfig and cmake)
WARNING: CMake Toolchain: Failed to determine CMake compilers state
Run-time dependency openblas found: YES 0.3.21
Dependency openblas found: YES 0.3.21 (cached)
Program _build_utils/process_src_template.py found: YES (/path/to/buildroot/output/host/bin/python3 /path/to/buildroot/output/build/host-python-numpy-1.25.0/numpy/_build_utils/process_src_template.py)
Program _build_utils/tempita.py found: YES (/path/to/buildroot/output/build/host-python-numpy-1.25.0/numpy/_build_utils/tempita.py)
output/build/host-python-numpy-1.25.0/numpy/meson.build:201:44: ERROR: Could not get cmake variable and no default provided for <CMakeDependency OpenBLAS: True None>
[...]
Two obvious ways to correct this:
- Add some kind of host-lapack / host-openblas dependency to
host-python-numpy, or
- Tell host-python-numpy not to look for (or rely on) external code.
Because the host numpy environment shouldn't be doing any numerical
heavy lifting, we opt for the latter here.
Signed-off-by: Graeme Smecher <gsmecher@threespeedlogic.com>
[yann.morin.1998@free.fr:
- explain why the issue was not found before
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Use pkg-config to find libnet and avoid the following build failure
raised since commit 100ba8351c if
libnet-config is found on the host:
/home/autobuild/autobuild/instance-4/output-1/host/bin/mips64el-buildroot-linux-gnu-gcc -s -o ngrep ngrep.o tcpkill.o -lpcap -lnet -lpcre -L/usr/lib -lnet
mips64el-buildroot-linux-gnu-gcc: ERROR: unsafe header/library path used in cross-compilation: '-L/usr/lib'
While at it, format Upstream tag of other patches
Fixes:
- http://autobuild.buildroot.org/results/05c916162b9c1027cf53f1699a1f5653151098ed
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop no longer used python-aenum runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Peter: drop python-setuptools as pointed out by Marcus Hoffmann]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 78e8f383 "configs/imx8mmpico: bump bsp components to version
tn-kirkstone_5.15.71-2.2.0" bumped components, but forgot to add
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y.
This commit adds it to the defconfig to fix the build.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/5858180248
In file included from tools/imagetool.h:24,
from tools/aisimage.c:7:
include/image.h:1166:12: fatal error: openssl/evp.h: No such file or directory
1166 | # include <openssl/evp.h>
| ^~~~~~~~~~~~~~~
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 7e0e6e3b86 (toolchain/toolchain-external/toolchain-external-bootlin:
update to 2023.11-1) the TestGrubX8664EFI fails with this error:
# efivar -l
traps: efivar[86] trap invalid opcode ip:7fc187f4c7f4 sp:7fff9bbaa930 error:0 in libefivar.so.1.38[7fc187f4c000+16000]
Illegal instruction
This error can be reproduced by installing other packages like "file".
The 2023.11-1 Bootlin toolchains are built for a corei7 CPU [0], which
is in fact a Nehalem CPU; we switched to the new names in commit
653fa001f3 (arch/Config.in.x86: add "newer" names for several Intel
x86 CPU variants). This means that the Bootlin toolchains may use
Nehalem-specific instructions.
The TestGrubX8664EFI test is also setup for BR2_x86_corei7, so our
executables will also contain Nehalem instructions.
However, the default Qemu x86_64 is not guaranteed to emulate all the
instructions specific to Nehalem, causing runtime issues as reported
above.
A similar issue has been fixed in toolchain-builder by adding Nehalem
cpu emulation on the qemu command line [0].
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/6093853712
[0] https://gitlab.com/buildroot.org/toolchains-builder/-/commit/f2b253732b4d1fc5b87badba7c2d48f12a197f76
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[yann.morin.1998@free.fr:
- reword the commit log to explain corei7 -> Nehalem equivalence
- note that the toolchain-builder *and* our test target corei7, thus
Nehalem
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A new kvm-unit-tests version has recently been tagged, so we can use this
version now for buildroot. It ships now with a full version of the GPL v2
license in the LICENSE file, thus we add a hash for that file, too.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libtracefs needs threads resulting in the following build failure since
its addition in commit b1dbd3f679:
In file included from /home/autobuild/autobuild/instance-2/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/include/stdio.h:27,
from ../src/tracefs-instance.c:10:
/home/autobuild/autobuild/instance-2/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/include/features.h:218:5: warning: #warning requested reentrant code, but thread support was disabled [-Wcpp]
218 | # warning requested reentrant code, but thread support was disabled
| ^~~~~~~
../src/tracefs-instance.c:20:10: fatal error: pthread.h: No such file or directory
20 | #include <pthread.h>
| ^~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/e0a8dd0781a1d1824a4cb78f47dcff4055083959
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Also adjust the include path for the device tree. Since Linux 6.5-rc1
(724ba67515 "ARM: dts: Move .dts files to vendor sub-directories"),
sama5d31.dtsi lives in the microchip subdirectory.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Marcus Hoffmann <bubu@bubu1.eu>
[yann.morin.1998@free.fr: add the comment to explain failure is success]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Calling `setup.py` build builds and installs an empty package
after upstream changed their packaging. Calling setuptools via
`python -m build` builds the package correctly.
Signed-off-by: Marcus Hoffmann <bubu@bubu1.eu>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The http://pagesperso-orange.fr service being down,
http://pagesperso-orange.fr/sebastien.godard/ is no longer
accessible (or more precisely serves some HTML junk), meaning that we
currently cannot download the tarball of sysstat from the official
upstream location, and we always fallback to sources.buildroot.net.
This commit therefore updates to use the new upstream location on
github.io. The 12.6.1 release is available there, with the same hash,
so we can just point to the new upstream location.
Fixes:
ERROR: while checking hashes from package/sysstat//sysstat.hash
ERROR: sysstat-12.6.1.tar.xz has wrong sha1 hash:
ERROR: expected: a730982e0c2d4964a0022c1509f3ea0a345402bc
ERROR: got : d64a079729f2ff5b304294d68fbc041a46c4966d
ERROR: Incomplete download, or man-in-the-middle (MITM) attack
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop no longer required python-msgfy runtime dependency.
Drop no longer required python-six runtime dependency.
Add new python-tcolorpy runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The license file 'README' has changed due to the following diff:
- $p3->parse($foo, ProtocolEncoding => 'ISO-8859-1');
- close($foo);
+ $p3->parse($fh, ProtocolEncoding => 'ISO-8859-1');
+ close($fh);
This does not affect the licensing terms.
A 'LICENSE' file was added in 2.47, but it contains the terms of the
wrong license (Artistic 2.0), while this package is under Artistic or
GPL-1.0+. This has been reported upstream at
https://github.com/cpan-authors/XML-Parser/pull/99.
Signed-off-by: Kevin Cui <bh@bugs.cc>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop no longer required python-setuptools runtime dependency.
Drop no longer required python-six runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 8f403f0 "package/micropython-lib: merge with, and install
as part of micropython" brought micropython library within the
package.
This commit improves the micropython runtime test by enabling the
micropython-lib and by also adding a runtime test using one of its
module. We choose to use the gzip module, and check whther decodign q
simple gziped file works; the micropython-lib gzip can only decompress,
so we need to prepare it from the shell.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
fit_check_sign is a tool for verifying fit image signatures, which gets
built if host-uboot-tools is built with fit signature support.
Install it if so.
Signed-off-by: Woodrow Douglass <wdouglass@carnegierobotics.com>
[Peter: reword commit message]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The webrtc-audio-processing package was bumped from version 0.3.1 to
version 1.3 in commit ef0fa986eb which
broke compatibility with the gst1-plugins-bad webrtcdsp plugin.
To fix this backport a commit from upstream adding support for
webrtc-audio-processing version 1.3 to gst1-plugins-bad.
Fixes:
output/build/gst1-plugins-bad-1.22.9/ext/webrtcdsp/meson.build:7:13: ERROR: Dependency "webrtc-audio-processing" not found, tried pkgconfig and cmake
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop no longer required python-six runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Bump version of Linux to 6.6.14 and U-Boot to 2024.01
and also use upstream configs and dts.
Signed-off-by: Ludwig Kormann <ludwig.kormann@ict42.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Release changelog:
- Use default values for IQ calibration correction when the eFuse
register has zero values.
- Fix for "WILC1000 Firmware initialization issue" by updating
the PMU clock switching sequence during firmware initialization.
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* Rework strerror_l() patch by declaring it only in utils.h as a macro
* select BR2_PACKAGE_UTIL_LINUX_LIBUUID since it's now mandatory
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Arnout:
- Preserve author of patch 0001.
- Update .checkpackageignore.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Setting HAPROXY_CFLAGS on the haproxy build command line overrides CFLAGS
which were internally set by the haproxy Makefile.
Among those omitted CFLAGS is -fwrapv. Compiling haproxy without it and
and then running the program results in runtime error:
$ haproxy
FATAL ERROR: invalid code detected -- cannot go further, please recompile!
...
To address this issue, include HAPROXY_CFLAGS in the DEFINE variable instead
of CFLAGS in haproxy.mk.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 363b4ebf1a set DBUS_CPE_ID_PRODUCT
to dbus but this is not needed as DBUS_CPE_ID_PRODUCT will be set to the
package name (i.e. dbus) by default
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
cpe:2.3:a:flex_project:flex has been deprecated in favor of
cpe:2.3:a:westes:flex in October 2023:
<cpe-item name="cpe:/a:flex_project:flex:2.6.4" deprecated="true" deprecation_date="2023-10-06T17:12:20.950Z">
<title xml:lang="en-US">Flex Fast Lexical Analyser 2.6.4</title>
<reference href="https://github.com/westes/flex/releases">Version</reference>
<reference href="https://github.com/westes/flex/">Product</reference>
<cpe-23:cpe23-item name="cpe:2.3:a:flex_project:flex:2.6.4:*:*:*:*:*:*:*">
<cpe-23:deprecated-by name="cpe:2.3:a:westes:flex:2.6.4:*:*:*:*:*:*:*" type="NAME_CORRECTION"/>
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
cpe:2.3:a:netatalk_project:netatalk has been deprecated in favor of
cpe:2.3:a:netatalk:netatalk in September 2023:
<cpe-item name="cpe:/a:netatalk_project:netatalk:3.1.13" deprecated="true" deprecation_date="2023-09-29T11:15:00.340Z">
<reference href="https://sourceforge.net/projects/netatalk/files/netatalk/">Version</reference>
<cpe-23:cpe23-item name="cpe:2.3:a:netatalk_project:netatalk:3.1.13:*:*:*:*:*:*:*">
<cpe-23:deprecated-by name="cpe:2.3:a:netatalk:netatalk:3.1.13:*:*:*:*:*:*:*" type="NAME_CORRECTION"/>
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
JSON Web Tokens are an open, industry standard RFC 7519
method for representing claims securely between two parties.
This Library is used by Asterisk 20.6.0 and newer.
We need to use autotools to install pkgconfig file.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Peter: drop _SOURCE, add host-pkgconf, add to DEVELOPERS]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 8519de517e (package/{glibc, localedef}: security bump to version
glibc-2.38-27-g750a45a783906a19591fb8ff6b7841470f1f5701) correctly mentioned
CVE-2023-4806 in the commit message, but forgot to add an ignore for it.
Fix that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[v1.3.1] - 2023-12-02
---------------------
Fixes mvls to work with kernels 6.2 and onwards.
- mdio: Multiple registers can now be dumped at once, via the generic
dump operation.
- mvls: Relax the driver matching to accept the strings used in
kernels 6.2 and newer.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Until now, micropython-lib was a package that installed v1.9.3, which is
more than 6 years old. This was acceptable since micropython never made
any other official release of the library until v1.20.
Meanwhile, the libraries underwent a reorganization, and they are now
available in a directory structure that cannot be copied directly into
the target. This might explain why v1.9.3 is still present in the
current day buildroot (which comes with micropython v1.22).
As part of the changes made by the micropython project, the libraries
are now released together with the interpreter. They are cloned as a
submodule into the lib/micropython-lib directory, and are present in the
release tarball.
This commit introduces an auxiliary script to collect those libraries
and reorder them into a structure that can then be copied into
/usr/lib/micropython. The script utilizes a module from the tools
directory of the micropython repo.
The helper script is kept as simple as possible, and makes use of
existing micropython tools (used to process manifests) to discover the
list of packages available in micropython-lib. The hope is that by
relying on them, any future changes in directory structure will be
covered by the official "manifestfile.py" tool.
It is to be noted that, even though the manifestfile.py script/module is
part of the micropython package, it is actually written for CPython, and
is not expected to even work when using micropython as an interpreter.
This we do not need to introduce host-micropython to use that tool, and
microython already depends on host-python3 for other parts of the build.
With this commit, micropython-lib is installed (optionally) as part
of micropython, and thus a separate package is no longer needed. The
original config variable name was retained as it fits with the
micropython package "namespace", and thus this is backward compatible
and no legacy handling is needed.
This commit also ensures that the libraries in micropython-lib will
be updated together with newer versions of micropython in the future.
Signed-off-by: Abilio Marques <abiliojr@gmail.com>
[yann.morin.1998@free.fr:
- use if-block in Config.in
- simplify PYTHONPATH
- fix check-package
- reword and reorder parts of the commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
diff LICENSE:
-This software is Copyright (c) 2000 - 2019 by David Rolsky.
+This software is Copyright (c) 2000 - 2024 by David Rolsky.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Updated WHENCE hash due to various new entries for new blobs.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit c07aafa087 (package/Makefile.in: set GIT_DIR=. in {HOST,
TARGET}_MAKE_ENV) added GIT_DIR=. to TARGET_MAKE_ENV (which is included in
TARGET_CONFIGURE_OPTS) to work around issues with packages getting confused
when building in a subdir of the Buildroot git repo.
This unfortunately also causes git commands to fail when
output/host/environment-setup is sourced:
git status
fatal: not a git repository: '.'
So strip GIT_DIR= from TARGET_CONFIGURE_OPTS when generating
environment-setup.
Reported-by: Mircea Gliga <gliga.mircea@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Adds support for the rtl8188fufw firmware variant, for 802.11n, as
covered by the mainline rtl8xxxu kernel driver since Linux 6.2.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This reverts commit 04dfeff624 as it
raises the following build failure because patch has been merged since
version 1.5.104:
Applying 0001-Fix-missing-references.patch using patch:
patching file libuuu/libcomm.h
Reversed (or previously applied) patch detected! Skipping patch.
1 out of 1 hunk ignored -- saving rejects to file libuuu/libcomm.h.rej
patching file uuu/buildincmd.h
Reversed (or previously applied) patch detected! Skipping patch.
1 out of 1 hunk ignored -- saving rejects to file uuu/buildincmd.h.rej
Fixes:
- http://autobuild.buildroot.org/results/bf7b2206261e3385c567ae4359b0379b03161e3a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure without gbm raised since commit
534c22dd60:
Message: dmabuf-feedback requires gbm which was not found. If you rather not build this, drop "dmabuf-feedback" from simple-clients option.
Move the option assignment further down, below all the simple-clients
lists; in Makefile, and because we are usign simply expanded variables,
this is not necessary, but it is easier on us humans when we review the
code.
Also add a comment explaining why the initial list is incomplete.
Fixes:
- http://autobuild.buildroot.org/results/ebbba1d73ceeaacee17fde0c6c853415cd316091
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The NuGet packaging description file is installed as:
$(DEST_DIR)/build/native/hiredis.targets
This is a sprurious file that has nothing to do on a Linux system,
whether that be in host/, staging/, or target/.
Backport an upstream patch to get rid of it.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Fixes the following security issues:
1) CVE-2023-6816 can be triggered by passing an invalid array index to
DeviceFocusEvent or ProcXIQueryPointer.
2) CVE-2024-0229 can be triggered if a device has both a button and a
key class and zero buttons.
3) CVE-2024-21885 can be triggered if a device with a given ID was
removed and a new device with the same ID added both in the same
operation.
4) CVE-2024-21886 can be triggered by disabling a master device with
disabled slave devices.
5) CVE-2024-0409 can be triggered by enabling SELinux
xserver_object_manager and running a client.
6) CVE-2024-0408 can be triggered by enabling SELinux
xserver_object_manager and creating a GLX PBuffer.
For details, see the advisory:
https://lists.x.org/archives/xorg-announce/2024-January/003444.html
Switch to .tar.gz as the announcement mail only contained hashes for that:
https://lists.x.org/archives/xorg-announce/2024-January/003442.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
1) CVE-2023-6816 can be triggered by passing an invalid array index to
DeviceFocusEvent or ProcXIQueryPointer.
2) CVE-2024-0229 can be triggered if a device has both a button and a
key class and zero buttons.
3) CVE-2024-21885 can be triggered if a device with a given ID was
removed and a new device with the same ID added both in the same
operation.
4) CVE-2024-21886 can be triggered by disabling a master device with
disabled slave devices.
5) CVE-2024-0409 can be triggered by enabling SELinux
xserver_object_manager and running a client.
6) CVE-2024-0408 can be triggered by enabling SELinux
xserver_object_manager and creating a GLX PBuffer.
For details, see the advisory:
https://lists.x.org/archives/xorg-announce/2024-January/003444.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Genimage complains about the config using the deprecated gpt option:
INFO: hdimage(sdcard.img): The option 'gpt' is deprecated. Use
'partition-table-type' instead
So change to partition-table-type for consistency with the other configs.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tested-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This changes bumps the version of the genimage package,
which brings in fixes when generating flash images that
reference sparse files, along with other fixes and features.
Signed-off-by: Hudson Ayers <hudson.ayers@getcruise.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The versioning scheme for libwpe uses the middle version number to
indicate stability: an even number for stable releases, odd for
development preview releases. As such, Buildroot should be using
version 1.14.2, which is the most recent of the stable releases.
While at it, add a note in the .mk file about the versioning scheme.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit e88823d667 (package/refpolicy: fix build with smartmontools) added
a 0001-policy-modules-services-smartmon.te-make-fstools-opt.patch patch, but
forgot to put it in the version specific sub directory - Breaking builds
using BR2_PACKAGE_REFPOLICY_CUSTOM_GIT as shown by the TestSELinuxCustomGit
test:
>>> refpolicy RELEASE_2_20200818 Extracting
gzip -d -c /builds/buildroot.org/buildroot/test-dl/refpolicy/refpolicy-RELEASE_2_20200818-br1.tar.gz | tar --strip-components=1 -C /builds/buildroot.org/buildroot/test-output/TestSELinuxCustomGit/build/refpolicy-RELEASE_2_20200818 -xf -
>>> refpolicy RELEASE_2_20200818 Patching
Applying 0001-policy-modules-services-smartmon.te-make-fstools-opt.patch using patch:
patching file policy/modules/services/smartmon.te
Hunk #1 FAILED at 143.
1 out of 1 hunk FAILED -- saving rejects to file policy/modules/services/smartmon.te.rej
make[1]: *** [package/pkg-generic.mk:241: /builds/buildroot.org/buildroot/test-output/TestSELinuxCustomGit/build/refpolicy-RELEASE_2_20200818/.stamp_patched] Error 1
https://gitlab.com/buildroot.org/buildroot/-/jobs/5929796183
Fix it by moving the patch to a versioned sub directory.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
see CVE-2024-0553: Fix more timing side-channel inside RSA-PSK key exchange
see CVE-2024-0567: Fix assertion failure when verifying a certificate chain with a cycle of cross signatures
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The help text is currently copy and pasted from the gstreamer video
player plugin help text. Change it to reflect the text from the
CMakeLists.txt file.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 99a50a8c98 (package/flutter-pi: new package) erroneously made
the gstreamer-based audio plugin depend on GLES, although there is no
such requirement defined in the CMakeLists. This error was likely due to
a copy/paste mistake.
Remove the requirement.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: reword commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure raised since the addition of the package
in commit 6aa1bc3167:
In file included from /home/buildroot/autobuild/run/instance-3/output-1/build/vulkan-loader-1.3.262/loader/extension_manual.h:24,
from /home/buildroot/autobuild/run/instance-3/output-1/build/vulkan-loader-1.3.262/loader/extension_manual.c:23:
/home/buildroot/autobuild/run/instance-3/output-1/host/aarch64-buildroot-linux-gnu/sysroot/usr/include/vulkan/vulkan.h:71:10: fatal error: X11/extensions/Xrandr.h: No such file or directory
71 | #include <X11/extensions/Xrandr.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/55ddfd44393e3bcc2f25bad2f9ecb7e1b142a985
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Tested-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The variable should be a YES/NO value, FALSE is not a valid value.
E.g. the yesno-to-bool cmd does not translate a FALSE value and therefore returns invalid JSON.
Signed-off-by: Maximilian Senftleben <maximilian.senftleben@frogblue-tec.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The MICROPYTHON_MAKE_ENV variable contained two things;
- the comon target environment variables CC, CFLAGS et al. defined in
TARGET_MAKE_ENV,
- the GIT_DIR workaround
Commit 9024e18665 (package/micropython: drop GIT_DIR=. workaround)
totally dropped the assignment to MICROPYTHON_MAKE_ENV, but did not
replace its expansin with TARGET_MAKE_ENV.
This yields build error like:
LINK build-standard/micropython
arm-linux-gcc: ERROR: unsafe header/library path used in cross-compilation: '-L/usr/lib64/../lib64'
Fix this by expanding TARGET_MAKE_ENV in lieu of MICROPYTHON_MAKE_ENV.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
See release notes (https://github.com/redis/redis/blob/7.2.4/00-RELEASENOTES):
================================================================================
Redis 7.2.4 Released Tue 09 Jan 2024 10:45:52 IST
================================================================================
Upgrade urgency SECURITY: See security fixes below.
Security fixes
==============
* (CVE-2023-41056) In some cases, Redis may incorrectly handle resizing of memory
buffers which can result in incorrect accounting of buffer sizes and lead to
heap overflow and potential remote code execution.
Bug fixes
=========
* Fix crashes of cluster commands clusters with mixed versions of 7.0 and 7.2 (#12805, #12832)
* Fix slot ownership not being properly handled when deleting a slot from a node (#12564)
* Fix atomicity issues with the RedisModuleEvent_Key module API event (#12733)
Signed-off-by: Titouan Christophe <titouanchristophe@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 2a8065e "package/postgresql: bump version to 16.1", the
postgresql service fail to start at runtime with an error:
FATAL: could not load library "/usr/lib/postgresql/dict_snowball.so": /usr/lib/postgresql/dict_snowball.so: undefined symbol: CurrentMemoryContext
This is due to the Posgresql autotool configure script trying to
detect whether the toolchain linker needs --export-dynamic or not.
This test is done with a runtime execution of a test program, and
therefore cannot run in cross-compilation. In that case, the
configure script assumes it is not needed. See commit [1], included
in PostgreSQL v16.0.
This commit fixes the issue by forcing the value in _CONF_ENV, as
suggested in an upstream bug report [2]. The package has already a
Kconfig dependency on !BR2_STATIC_LIBS, so the value can be
unconditionally set.
Note that upstream is not considering cross-compiling as supported, and
are not keen on fixing any cross-compiling issue [3].
[1] https://git.postgresql.org/gitweb/?p=postgresql.git;a=commitdiff;h=9db49fc5bfdc0126be03f4b8986013e59d93b91d
[2] https://www.postgresql.org/message-id/79e63515-0f5e-30f4-136d-96e23b1a817d%40posteo.de
[3] https://www.postgresql.org/message-id/1266022.1701958693%40sss.pgh.pa.us
Signed-off-by: Julien Olivain <ju.o@free.fr>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
[yann.morin.1998@free.fr: add upstream ML thread on the issue]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Flutter-engine is by name an engine, i.e. a runtime for applications, a
super-library of sorts. As such, it makes more sense for applications to
select flutter-engine rather than to depend on it.
Change flutter-pi to select flutter-engine.
It also brings flutter-pi on par with ivi-homescreen, another embedder.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: reword commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Remove and create the kernel_blob.bin file in the flutter_assets directory:
When Flutter compiles the source code, it creates the kernel_blob.bin file,
a Dart Kernel Bytecode of the application.
If kernel_blob.bin exists inside the flutter_assets directory, then the
application source code can be extracted with nothing more than apktool.
Not only is this a security risk, it's also redundant and a waste of space.
Removing the kernel_blob.bin file generated for flutter-gallery saves 86M!
Because this package is a reference package, and some applications may check
if the kernel_blob.bin file exists, we also touch a blank kernel_blob.bin
file.
Do not use relative symlinks:
Users may install their applications in any arbitaryt location, not
necessarily in the /usr/share/flutter/${package_name} directory. Because
flutter-gallery is a reference application, using exact symlinks to
icudtl.dat and libflutter_engine.so is preferable.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As the flutter-gallery package is a reference package for users wishing to use
Flutter for their UX with Buildroot, this package must have the correct build
options. Indeed, this package currently starts and runs, but only because of
the 0001-remove-GetStorage.patch. Through testing, flutter-gallery fails to
run during the following scenario:
- The xdg-user-dirs package is ported and present.
- flutter-gallery depends on xdg-user-dirs.
- The 0001-remove-GetStorage.patch file is removed.
After extensive testing and comparing the current build arguments against what
the meta-flutter repository for Yocto passes to all of the applications that
inherit flutter-app, it is clear that handling the dart_plugin_registrant.dart
file is missing from the dart arguments in the flutter-gallery build step.
As the documentation for the dart_plugin_registrant.dart file is nonexistent
in any official documentation. However, there is a comment from an issue on
the official dart-lang/sdk page on Github that explains what this file is
(and refers to the Dark SDK source code instead of official documentation.)
From https://github.com/dart-lang/sdk/issues/52506#issuecomment-1562806787:
```
The dart_plugin_registrant.dart is a very special file. It's neither included
in the Dart app nor any dependent packages. Rather it's an artificially
created file by the flutter tools. It contains logic to run plugin
registration logic.
A flutter build will eventually compile the Dart application where it will add
<dir>/.dart_tool/flutter_build/dart_plugin_registrant.dart as an extra source
file (see here). Additionally it will also inject that uri as a constant into
Dart source code via a -Dflutter.dart_plugin_registrant=<uri>.
Once the app runs it will access the
package:flutter/src/dart_plugin_registrant.dart:dartPluginRegistrantLibrary
constant and use it to look up the library object and then invoke the plugin
registration logic.
```
Now that what the dart_plugin_registrant.dart does is understood, we need to
pass the following to the dart binary during the flutter-gallery build step:
-Dflutter.dart_plugin_registrant=file://[...]/dart_plugin_registrant.dart:
Injects a file containing the logic to run the plugin registration logic as
a constant into the flutter-application source code.
--source file://$(@D)/.dart_tool/flutter_build/dart_plugin_registrant.dart:
Adds the dart_plugin_registrant.dart file as a source file to compile.
--source package:flutter/src/dart_plugin_registrant.dart:
Binds the plugin implementation to the platform interface based on the
configuration of the app's pubpec.yaml, and the plugin's pubspec.yaml.
The native_assets.yaml file provides the native-assets mapping for
@Native external functions. The flutter-gallery package has no functions
marked as @Native; however, calling "flutter build bundle" creates a blank
template "native_assets.yaml" file, which is safe to include in the build.
This line, while not necessary for flutter-gallery, may be helpful for other
users who use @Native external functions in their applications, and this
example makes porting other applications quicker and easier.
Finally, there is a known issue when using the dart_plugin_registrant.dart
file outlined here: https://github.com/flutter/flutter/issues/137972.
To summarize: If a user fails to pass the --obfuscate flag to gen_snapshsot
when using the dart_plugin_registrant.dart file, their application may fail
to start. One such application is Gallery, which I have independently verified.
As such, pass the --obfuscate flag to gen_snapshot to ensure that
flutter-gallery properly starts when building with the additional
dart_plugin_registrant.dart arguments above.
However, I acknowledge that the obfuscate flag hides function and class names
in compiled Dart code, and there are some cases when a user should avoid using
the flag. For example, when using the runtimeType API:
https://api.flutter.dev/flutter/dart-core/Object/runtimeType.html. However,
this is not the case with flutter-gallery, and the --obfuscate flag is needed.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: restore FLUTTER_RUNTIME_MODES]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
To make the next patch easier to understand, add a configure step to the
flutter-gallery.mk file. The `$(HOST_FLUTTER_SDK_BIN_FLUTTER) build bundle`
command is placed in the configure step because it generates several files
needed for the flutter_gen_snapshot tool to generate the target .so file.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The canonical name for the 'pub' action is 'pub', while 'packages' is
just an alias. Switch to using the canonical name.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: split off to its own commit]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As Yann mentioned in commit 9d8497e79d, a
dependency on a glibc toolchain implies a dependency on
BR2_TOOLCHAIN_HAS_THREADS_NPTL. As such, remove the dependency from
package/flutter-engine/Config.in.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The current depot-tools version is from Jul 13 2023, and there is a bug
where when building with PPD enabled, building a Flutter application on
my laptop running Fedora 39 or even in the Debian 11 container fails due
to permission issues when running rsync such as:
/usr/bin/sed: couldn't open temporary file [...]/output/per-package/flutter-gallery/host/share/flutter/sdk/.vpython-root/0e1e32/lib/python3.8/sed763MrF: Permission denied
make: *** [package/pkg-generic.mk:267: [...]/output/build/flutter-gallery-2.10.2/.stamp_configured] Error 123
After several hours of attempting to find the exact cause of the issue
by parsing git logs of the depot_tools repository and cross-referencing
bugs on https://bugs.chromium.org/p/chromium/issues I am unable to
determine the exact reason why the problem occurs or the exact commit
that fixes the issue.
However, updating depot-tools does indeed fix the issue, and looking at
the source code between 4e87f5bf and 8d14454b shows improvements to
several bash scripts, such as gclient, vpython3, and spid. All of which
could be culprits of this bug. As flutter-engine is the only package
that uses host-depot-tools, it is safe to update.
This permission bug is present on PPD and normal builds, but causes a
build to crash only on PPD because of rsyncing. On non-ppd builds, the
bug only causes some minor annoyance when trying to run `make clean`
because permission denials crop up when trying to remove the
.vpython-root directory.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr:
- copy the cover-letter description as commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The keyboard manager plugin is also missing the flutter/standard_method_codec.h
header.
- Add shell/plugins/keyboard_manager/keyboard_manager.h to the patch.
- Rename the patch to
0001-add-missing-headers-to-the-audio-players-and-keyboar.patch
Upstream pull request updated as well.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When running the command "flutter pub get," the plugins are stored in the
pub-cache directory along with their sha256sum hashes. The default location of
the pub-cache directory is current $(HOST_DIR)/share/flutter/sdk/.pub-cache,
which is not an acceptable choice by default because every plugin is
re-downloaded during every build of a flutter application either during a new
build or when building with the per-package-directory option enabled.
Furthermore, keeping the pub-cache in its current location prevents users from
committing the pub-cache directory to git for faster rebuilds of a
Buildroot-based system, as users cannot store the pub-cache for later use.
To fix the above issue completely, the following two changes must occur:
- Change the hard-coded Flutter pub-cache location to
$(DL_DIR)/br-flutter-pub-cache.
- Remove the `rm -rf $(HOST_FLUTTER_SDK_BIN_SDK)/.pub-cache` and the
associated comment about why the build system removes the .pub-cache
directory. After further research, the help text of the precache command
reads, "Populate the Flutter tool's cache of binary artifacts."
The current reasoning listed in the comments is not accurate for a
the following reasons:
1. We do not want to remove their directory if users already have a pub
cache they have symlinked to.
2. If the flutter-sdk-bin package previously set up the pub-cache, then
the pub-cache directory is set up with the options we want, and there
is no reason to remove the pub-cache directory.
Note that upstream considers it safe to have multiple instances of
readers/writers to the pub cache concurently, which is a situation that
can happen when two flutter-based pacakges are going to be built in
parallel. There have been reports upstream [0] [1] [2] where concurrency
was an issue, and they have always been fixed [3] [4] (or considered
fixed already). So we can assune that, if the conncurrent ccess to the
shared pub-cache causes issues, that will be an upstream bug that will
get solved.
If that turns out to be an unsolvable problem, we'll still have the
option to run the pub-get commands under flock.
[0] https://github.com/dart-lang/pub/issues/1178
[1] https://github.com/dart-lang/pub/issues/3404
[2] https://github.com/dart-lang/pub/issues/3420
[3] https://github.com/dart-lang/pub/issues/1178#issuecomment-1006489414
[4] https://github.com/dart-lang/pub/issues/1178#issuecomment-1007273739
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: add blurb about concurrent access]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The BCM2712 of the RaspberryPi 5 supports for 16KB page size.
This adds support for 16 KB on ARM64.
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Buildroot commit c50e9c21f0 initially
added the package onevpl (meanwhile renamed to libvpl) and forgot to
add all dependencies of BR2_PACKAGE_LIBDRM_INTEL.
Fixes:
http://autobuild.buildroot.org/results/8fa/8fa0f2cd7a027d3d8fae56125621b0b814e132da/
Note: BR2_PACKAGE_LIBDRM_HAS_ATOMIC is always true on x86, but it is
propagated for consistency with the actual dependencies of libdrm-intel.
Notes: this means the current comntition in the .mk is correct in
practice, even if it does not account for the atomic case on x86.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
[yann.morin.1998@free.fr: add notes]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As found out by Yann E. Morin in [1], apcupsd configure script is ugly,
and uses gcc to do the link line-wrapping which will raise the following
build failure with gcc 13:
/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/powerpc64le-buildroot-linux-gnu/13.2.0/../../../../powerpc64le-buildroot-linux-gnu/bin/ld: /home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/powerpc64le-buildroot-linux-gnu/13.2.0/../../../../powerpc64le-buildroot-linux-gnu/lib/../lib64/libsupc++.a(eh_alloc.o): in function `std::basic_string_view<char, std::char_traits<char> >::compare(unsigned long, unsigned long, char const*, unsigned long) const':
eh_alloc.cc:(.text._ZNKSt17basic_string_viewIcSt11char_traitsIcEE7compareEmmPKcm[_ZNKSt17basic_string_viewIcSt11char_traitsIcEE7compareEmmPKcm]+0x44): undefined reference to `std::__throw_out_of_range_fmt(char const*, ...)'
It will also raise the following build failure on sparc/arc:
/home/autobuild/autobuild/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arceb-snps-linux-uclibc/9.2.1/../../../../arceb-snps-linux-uclibc/bin/ld: /home/autobuild/autobuild/instance-3/output-1/host/arceb-buildroot-linux-uclibc/sysroot/lib/libsupc++.a(eh_throw.o): in function `__exchange_and_add_dispatch':
/SCRATCH/arcjenkins2/slaves/ru20-custom-arcgnu2/workspace/arcoss_verification/arc_gnu_toolchain_release/arc_gnu_toolchain_release/bd-uclibceb/gcc-stage2/arceb-snps-linux-uclibc/libstdc++-v3/include/ext/atomicity.h:82: undefined reference to `__gnu_cxx::__exchange_and_add(int volatile*, int)'
/home/autobuild/autobuild/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arceb-snps-linux-uclibc/9.2.1/../../../../arceb-snps-linux-uclibc/bin/ld: /SCRATCH/arcjenkins2/slaves/ru20-custom-arcgnu2/workspace/arcoss_verification/arc_gnu_toolchain_release/arc_gnu_toolchain_release/bd-uclibceb/gcc-stage2/arceb-snps-linux-uclibc/libstdc++-v3/include/ext/atomicity.h:82: undefined reference to `__gnu_cxx::__exchange_and_add(int volatile*, int)'
Instead of trying to patch the configure script as advocated by
Yann E. Morin, set LD to TARGET_CXX as:
- this solution is quicker
- usptream is dead (last release in 2016)
- this solution has already been used in other packages (nodejs, zmqpp)
[1]: https://patchwork.ozlabs.org/project/buildroot/patch/20200812171821.2517-1-Evgeniy.Didin@synopsys.com/
Fixes:
- http://autobuild.buildroot.org/results/6096c3ddc5edf3204635c2c90246c2e8c8e074e7
- http://autobuild.buildroot.org/results/d8a/d8a3ab31c5b86871c7e1117f4ffa7b6cedfcb7e0/build-end.log
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- updated LICENSE hash because of changed link to fmt's license
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add support of Amlogic bluetooth firmware.
Signed-off-by: Yang Li <yang.li@amlogic.com>
[yann.morin.1998@free.fr:
- add license file and its hash
- move to BT submenu
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Although similar in name, they use different kernel driver (with the
exception of common Bluetooth driver, but the firmware file is quite
large anyway, so it's worth having the possibility to be specific).
Signed-off-by: Jan Čermák <sairon@sairon.cz>
[yann.morin.1998@free.fr:
- add hash for license file
- reorder alphabeticlly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add files for rtw89 driver and extend help text for rtw88 option a bit.
Signed-off-by: Jan Čermák <sairon@sairon.cz>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop patch which is now upstream.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Peter: drop patch from .checkpackageignore]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
All in-tree configs with the uboot bootloader use a custom version,
so this patch is mostly for the menuconfig default uboot version
Signed-off-by: Flávio Tapajós <flavio.tapajos@newtesc.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tested on a Raspberry PI4 with a SNOM 360 and a SIP Trunk to Easybell.
Attention: chan_sip is deprecated, use chan_pjsip instead.
For chan_pjsip you need to enable openssl otherwise the module will not
load.
Patches 0005 and 0006 are applied upstream.
Remove unused configure options:
--without-curses
--without-isdnnet
--without-misdn
--without-nbs
--without-oss
--without-sqlite
--without-suppserv
--without-termcap
--without-tinfo
--without-vpb
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The condition checking whether the webrtc-audio-processing package is
enabled, added in commit
3ccd3b4c38 ("package/pipewire: bump to
version 0.3.32") is obviously incorrect, and can never be true.
Fix the condition to use the correct variable instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Custom Northstar images allow installing (flashing) them using vendor UI
or CFE bootloader.
The change of DTS files paths ("broadcom/" prefix introduction in Linux
6.5+) prevented post script from generating them.
Adjust post-image.sh to deal with new paths.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even though Northstart platform support is well upstreamed it may always
happen that some kernel change affects/breaks something. It's a good
practice to specify fixed versions for kernel & Linux headers.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 4.14.x series is now EOL upstream, so drop the linux-headers option
and add legacy handling for it.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that profile mode is an option for the flutter-engine package, the logic
in package/flutter-sdk-bin/flutter-sdk-bin.mk is no longer sufficient.
The profile/debug/release logic was inspired by:
https://github.com/meta-flutter/meta-flutter/blob/kirkstone/conf/include/
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr:
- make FLUTTER_ENGINE_RUNTIME_MODE_PROFILE win over
BR2_ENABLE_RUNTIME_DEBUG
- don't set variables to empty string
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A number of packages try to detect if they are running in a git repo and run
git describe at build time instead of using the hard coded version number if
it succeed, leading to odd version numbers as they end up picking up the
Buildroot git version if building inside a Buildroot git checkout, E.G.:
rauc --version
rauc 2023.11-562-g9c954953b4+
This is because rauc builds with meson and uses vcs_tag:
https://github.com/rauc/rauc/blob/v1.11/meson.build#L168-L171https://mesonbuild.com/Reference-manual_functions.html#vcs_tag
Another example is micropython, where we already work around it by passing
GIT_DIR=.
In the context of Buildroot the packages are never built in their own git
checkout, so pass GIT_DIR=. to ensure git doesn't walk back up the
directory tree and finds the Buildroot git repo, which fixes the rauc (and
similar) issues.
>>> rauc 1.11 Building
..
ninja: Entering directory `/home/peko/source/buildroot/output-rauc/build/rauc-1.11//build'
[1/29] Generating version.h with a custom command
fatal: not a git repository: '.'
cat output-rauc/build/rauc-1.11/build/version.h
#define PACKAGE_STRING "rauc 1.11"
#define PACKAGE_VERSION "1.11"
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Building for i386 raises the following build failure since the additon
of the package in commit 3e4b479f39:
Makefile:23: *** "The architecture i386 isn't supported". Stop.
Setting ARCH=x86 won't work either as it results in the following build
failure:
compel/arch/x86/plugins/std/memcpy.S: Assembler messages:
compel/arch/x86/plugins/std/memcpy.S:20: Error: bad register name `%rdi'
compel/arch/x86/plugins/std/memcpy.S:21: Error: bad register name `%rdx'
compel/arch/x86/plugins/std/memcpy.S:22: Error: `shrq' is only supported in 64-bit mode
compel/arch/x86/plugins/std/memcpy.S:24: Error: `movsq' is only supported in 64-bit mode
compel/arch/x86/plugins/std/syscalls/syscall-common-x86-64.S: Assembler messages:
compel/arch/x86/plugins/std/syscalls/syscall-common-x86-64.S:13: Error: bad register name `%rcx'
compel/arch/x86/plugins/std/syscalls/syscall-common-x86-64.S:19: Error: bad register name `%rax'
Fixes:
- http://autobuild.buildroot.org/results/94cc463762b57efacf743d107a8dda7660a995a3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Buildroot only offers two possible runtime modes for Flutter that are
automatically selected based on what the user has selected:
- debug if BR2_ENABLE_RUNTIME_DEBUG is enabled.
- release if BR2_ENABLE_RUNTIME_DEBUG is not enabled.
However, Flutter also offers the profile runtime mode option.
From https://docs.flutter.dev/testing/build-modes:
```
"Use profile mode when you want to analyze performance."
What is profile mode?
Some debugging ability is maintained in profile mode, which is enough to
profile your app's performance. Profile mode is turned off on the emulator
and simulator because their behavior does not represent actual performance.
```
As Flutter projects can be heavy and consume many resources, it is necessary
to allow users developing a Flutter application to profile their application
during development.
This patch introduces a new choice: FLUTTER_ENGINE_RUNTIME_MODE_PROFILE.
If unselected, the global option BR2_ENABLE_RUNTIME_DEBUG continues to
determine whether to build Flutter in release or debug mode. This new option
may confuse some users who wonder where the release and debug options are, so
the help menu section under the FLUTTER_ENGINE_RUNTIME_MODE_PROFILE option
explains that the global BR2_ENABLE_RUNTIME_DEBUG option controls the debug
and release modes.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr:
- move plugin description, from commit log, to help text
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
There are 14 commits between the current version of d62e84 and f34d7b.
Some highlights include:
- egl_gbm_render_surface: fix initialization of is_locked:
- src/egl_gbm_render_surface: properly fallback to surface with no modifier
(so we can drop our patch)
- user input: store mt positions separately
- video player: Transition to READY before NULL
- check all malloc returns
In addition, commit 6a28738 introduces the charset_converter, which is a
platform-side implementation of the charset_converter plugin found here:
https://pub.dev/packages/charset_converter
As this is a new plugin, disable it; a follow-up commit will add an
option to enable it.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently the tests TestRust and TestRustBin do check for vendoring by
requiring package ripgrep to be built but only if the download
directory is already empty, otherwise the existing contents of the download
directory will be reused and therefore not be redownloaded.
This new test will only verify that the required packages are downloaded
and vendored correctly without doing a runtime test. It does so by setting a
path to a folder "dl" inside the build directory (output-directory/testname/)
and then setting the environment variable BR2_DL_DIR to this path before the
build starts. BR2_DL_DIR is not set in the config options because it would be
overridden by the user's own environment variable if defined. This code was
essentially copied from the file test_gitforge.py which was added in commit
1ca6ab6ace
We want the package ripgrep to be built since it requires vendoring
directly. Additionally we want the package python-cryptography to be
built because it has rust dependencies and therefore indirectly also requires
vendoring.
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Signed-off-by: Antoine Coutant <antoine.coutant@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 768f9f80f6 (support/download: generate even more reproducible
tarballs) causes non-reproducibility in tarballs we previousy
generated, especially the archives for two cargo-vendored packages,
ripgrep and sentry-cli.
The cause is that those two pakcages eventually vendor a file that has
the u+x bit set, but is otehrwise go-x. With 768f9f80f6, the files are
now go+x, so the hash for those generated archives has changed.
Besides, that commit was wrong: it did not account for the 'r' bit for
go part, leaving some non-reproducibility still unaccounted for.
So, to generate really reproducible archives, we would need to fix that
read bit as well, and that has the potential to affect all the archives
we generated so far. If we wanted to do so, we'd need a way to version
all generated archives, like we do for git and svn, but now for all the
different CVSes, as well as for all the vendoring post-processes.
For 768f9f80f6, all that was of conern was the working copies of CVSes
(i.e. git, svn, cvs...) that we cache in the Buildroot download dir, not
the temporary files during post-processing. Indeed, in that latter case,
the user has virtually no way to mangle with the mode of the
intermediate extract before repack.
And we do have a big fat warning that users should not attempt to meddle
with the git tree that Buildroot caches.
As 768f9f80f6 however demonstrates, is that it took quite a long time
between the introduction of the git caching, and the time someone
eventually discovered they could meddle in there. This shows that the
issue it not actually critical in most setups.
Also, the tar manual [0] hints at a better solution to handle
reproducibility, which even avoids touching the files on disk which is
even nicer:
‘--mode='go+u,go-w'’
Omit irrelevant information about file permissions.
If we were to actually handle the mode bit for reproducibility, we'd
need to:
- introduce archive versioning for all download backends and
prost-processing
- use the tar officially suggested method
So, revert that change, as it was incomplete, was not really fixing much
issues, and causes actual issues.
This reverts commit 768f9f80f6.
[0] https://www.gnu.org/software/tar/manual/tar.html#Reproducibility
Thanks to Vincent and Arnout for pointing at the tar manual.
Reported-by: Antoine Coutant <antoine.coutant@smile.fr>
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Antoine Coutant <antoine.coutant@smile.fr>
Commit 6d163e12a4 (package/udev: move render and sgx to
package/systemd) moved the sgx group creation to the systemd package because
eudev at that time did not reference it. This changed in eudev 3.1.12 with
commit a8ffcd1b985fb4 (rules/50-udev-default.rules: fix issue 160) so move
it back to get rid of a warning from udevd:
udevd[303]: specified group 'sgx' unknown
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Upstream changed their --{en,dis}able-telemetry option, and replaced it
with --{en,dis}able-analytics.
A subsequent look at the rest of the file including the logic around the
change of the name of the above option provides no other elevant changes
that would apply to this package update.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
flutter-gallery was erroneously placed under the "Graphic libraries"
section of the menu "Graphic libraries and applications (graphic/text)"
menu. However, as flutter-gallery is a flutter-based graphical user
interface (GUI) application, it is better suited to be placed under the
"Graphic applications" section.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
flutter-pi was erroneously placed under the "Graphic libraries" section
of the menu "Graphic libraries and applications (graphic/text)" menu.
However, as flutter-pi is an application that runs graphic applicaitons
it is better suited to be placed under the "Graphic applications"
section.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Let's drop local patch thas has been upstreamed but another one to fix
linking failure due to meson and Makefile unalignment. Also, now libtracefs
samples require pthread, but we don't want samples to be built to save
target size and reduce dependencies counot, so let's disable it by setting
meson samples variable to false in LIBTRACEFS_CONF_OPTS.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr: do an actual backport now it's upstreamed]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a choice to allow using the Wayland variant of the r6p2 Mali driver.
When selected, the package is marked as provider for libgbm as
libMali.so includes the symbols and a libgbm.so symlink is installed;
and both BR2_PACKAGE_HAS_{LIBGBM,LIBEGL_WAYLAND} are selected
accordingly.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Much like flutter-pi, this package is a Flutter embedder used to run Flutter
applications. However, unlike Flutter-pi, this package requires a Wayland
compositor to run, which flutter-pi does not support. Furthermore, flutter-pi
lacks several plugins and features that ivi-homescreen supports, such as:
- Dart VM console redirection
- DLT logging
- Accessibility
- Compositor region
- Compositor surface
- Desktop Window
- Go Router
- Isolate
- Keyboard Manager
- Layer Playground
- Mouse Cursor
- PackageInfo
- Platform
- Platform Views
- Restoration
The following plugins and options are hardcoded to off:
- Crash handler: Requires a newer version of sentry-native.
- File selector: Requires the zenity package.
- Firebase-core: Requires the firebase-cpp-sdk package.
- URL Launcher: Requires a runtime-dependency on xdg-open.
- BUILD_TEXTURE_NAVI_RENDER_EGL: Failes to build.
- BUILD_TEXTURE_TEST_EGL: Fails to build.
- ENABLE_AGL_CLIENT: Used for Automitve Grade Linux (AGL).
The ENABLE_XDG_CLIENT=ON option is a requirement to run Flutter apps.
If this option is disabled, ivi-homescreen segfaults when starting an
application.
Finally, there is a need for a patch that fixes the audio-players plugin:
If the audio-players plugin is the only plugin selected, several compilation
errors occure because of undeclared definitions, as the standard_method_codec.h
header file is missing.
Upstream-status: https://github.com/toyota-connected/ivi-homescreen/pull/133
This package has been tested on a x86_64 host with an AMD Ryzen 9 6900HS
with Docker 24.0.5:
- The following distributions:
- Fedora 39: Host system
- Ubuntu 22.04: Docker
- Debian 11: Docker
- The following targets:
- BR2_aarch64
- BR2_arm
- BR2_x86_64
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr:
- propagate BR2_PACKAGE_HOST_FLUTTER_SDK_BIN_ARCH_SUPPORTS to comments
- drop NPTL, implied by glibc
- reorder dependencies in a more logical way
- reorder comments
- drop undefined BR2_PACKAGE_IVI_HOMESCREEN_HAS_CLIENT
- grammar ("for to change")
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure on sparc64 raised since bump to version
0.85 in commit 470f0fb1ec:
error[E0308]: mismatched types
--> /home/autobuild/autobuild/instance-7/output-1/build/nushell-0.85.0/VENDOR/uucore/src/lib/features/fs.rs:121:16
|
111 | pub fn number_of_links(&self) -> u64 {
| --- expected `u64` because of return type
...
121 | return self.0.st_nlink;
| ^^^^^^^^^^^^^^^ expected `u64`, found `u32`
|
help: you can convert a `u32` to a `u64`
|
121 | return self.0.st_nlink.into();
| +++++++
For more information about this error, try `rustc --explain E0308`.
error: could not compile `uucore` (lib) due to previous error
Fixes:
- http://autobuild.buildroot.org/results/f9f0287a8e39c65895014ca513ed25071f020add
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Drop patch (not needed anymore)
- Switch to meson-package
- libabseil-cpp is a mandatory dependency
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While updating ARC GNU toolchain version (see [1]) we unintentionally
got rid of "0001-poison-system-directories.patch" which still makes
sense.
Even though one may think that we do not need these Binutils patches
because we do "poisoning" of system directories in toolchain wrapper,
but these wrappers don't exist for tools originated from Binutils, only
for gcc, g++ etc.
So we need to keep that patch still, sorry.
[1] https://git.buildroot.net/buildroot/commit/?id=045ab73702b8bc09f94ca1f3b8e5bf3acb0b0843
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure raised since the addition of the package
in commit ea45b95c0e:
/home/autobuild/autobuild/instance-12/output-1/build/python-grpcio-1.60.0/setup.py:40: DeprecationWarning: pkg_resources is deprecated as an API. See https://setuptools.pypa.io/en/latest/pkg_resources.html
import pkg_resources
Traceback (most recent call last):
File "/home/autobuild/autobuild/instance-12/output-1/build/python-grpcio-1.60.0/setup.py", line 289, in <module>
if check_linker_need_libatomic():
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/autobuild/autobuild/instance-12/output-1/build/python-grpcio-1.60.0/setup.py", line 223, in check_linker_need_libatomic
cpp_test = subprocess.Popen(
^^^^^^^^^^^^^^^^^
File "/home/autobuild/autobuild/instance-12/output-1/host/sparc64-buildroot-linux-gnu/sysroot/usr/lib/python3.11/subprocess.py", line 1026, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/home/autobuild/autobuild/instance-12/output-1/host/sparc64-buildroot-linux-gnu/sysroot/usr/lib/python3.11/subprocess.py", line 1950, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'no'
Fixes:
- http://autobuild.buildroot.org/results/58ac25b4e426712269c5fc144121c955b714c760
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libopenssl needs perl Math::BigInt for s390x asm to avoid the following
build failure since commit a5cacb6308:
Can't locate bigint.pm in @INC (you may need to install the bigint module) (@INC contains: /home/buildroot/autobuild/instance-0/output-1/build/libopenssl-3.2.0/crypto/poly1305/asm/../.. /home/buildroot/autobuild/instance-0/output-1/host/lib/perl /usr/local/lib64/perl5/5.36 /usr/local/share/perl5/5.36 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5) at /home/buildroot/autobuild/instance-0/output-1/build/libopenssl-3.2.0/crypto/poly1305/asm/../../perlasm/s390x.pm line 16.
BEGIN failed--compilation aborted at /home/buildroot/autobuild/instance-0/output-1/build/libopenssl-3.2.0/crypto/poly1305/asm/../../perlasm/s390x.pm line 16.
Fixes:
- http://autobuild.buildroot.org/results/986cb07d368c7214ffbc9d60c378e7ac00797f00
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop python-chardet/python-cchardet runtime dependencies.
Drop python-typing-extensions runtime dependencies.
Add new python-brotli runtime dependency.
Add new python-frozenlist runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The qwt package is a Qt5 package, not a Qt6 one, so it can't benefit
from the target-finalize hook that was introduced in e29fcde4ba
(package/qt6base: remove $(TARGET_DIR)/usr/mkspecs in target-finalize).
Indeed, the original patch was hard-coding the mkspecs removal directly
in the target-finalize recipe, and that was made a hook as a last-minute
change when applying, without realising that qwt was qt5-based.
So, reinstate the mkspecs removal as an ad-hoc fixup in the qwt package.
This actually partially reverts commit e29fcde4ba (package/qt6base:
remove $(TARGET_DIR)/usr/mkspecs in target-finalize).
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure raised because madplay uses mad_f_mul
which is defined in usr/include/mad.h (installed by libmad which has
been fixed by a similar workaround in commit
0aaadd525f, unfortunately the fix works
for compiled code, not mad_f_mul define):
/tmp/cc5SGGoU.s:102: Error: selected processor does not support `smull r8,r9,r2,r4' in Thumb mode
Fixes:
- http://autobuild.buildroot.org/results/0c0955d4f6726b50cad721f4d3437dabde316e70
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Use official tarball
- Update hash of license file (some packages have been added or removed
but the list of licenses is the same)
- Fix CVE-2023-7158: A vulnerability was found in MicroPython up to
1.21.0. It has been classified as critical. Affected is the function
slice_indices of the file objslice.c. The manipulation leads to
heap-based buffer overflow. It is possible to launch the attack
remotely. The exploit has been disclosed to the public and may be
used. Upgrading to version 1.22.0 is able to address this issue. It is
recommended to upgrade the affected component. The identifier of this
vulnerability is VDB-249180.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Drop patch (already in version) and so also drop autoreconf
- The sudoers plugin has been modified to make it more resilient to
ROWHAMMER attacks on authentication and policy matching. This
addresses CVE-2023-42465.
https://www.sudo.ws/releases/stable/#1.9.15p5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update site to avoid redirections (HSTS, etc.)
Version 5.0.3 - 12/17/2023
A memory leak fix in the prior version wasn't applied correctly, resulting
in an invalid memory access causing a crash. Bug fixed.
Version 5.0.2 - 11/8/2023
Fixed bug that caused crash when a CLIENT_KEY arrived out of order
Fixed option handling on Windows when an argument is missing
https://sourceforge.net/projects/uftp-multicast/files/Changes.txt/download
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure raised since the addition of the package
in commit 1474f1b34b:
../src/event-plugin.c:10:10: fatal error: dlfcn.h: No such file or directory
10 | #include <dlfcn.h>
| ^~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/7802d1ad00293147edda39683f6d3f614dd48263
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: only list first-level inherited deps]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This usage of <PKG>_NAME was introduced in commit f9e9c6349a
("package/rng-tools: bump to 6.7"). No other package uses <PKG>_NAME
this way.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We switched to new upstream since commit f9e9c6349a
("package/rng-tools: bump to 6.7"). Update the website URL as well.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Historically, Buildroot has defaulted to -Os as the gcc optimization
flags. However, this default is probably not the most appropriate
anymore, and this commit therefore changes the default to -O2.
Here are some arguments in favor of this change:
- Most Buildroot users use Buildroot for platforms that have a
reasonable amount of storage, and the difference between -Os and -O2
in terms of code size is no longer as significant compared to the
size of storage available on average embedded Linux devices
typically found these days.
- -Os can have a pretty bad performance impact, compared to -O2.
- -Os is much less widely tested than -O2. For example, with recent
versions of gcc, there are parts of Qt5 that segfault when compiled
with -Os and work perfectly fine with -O2. Yes, it's a compiler bug
that should be fixed, but in the mean time, having a default that's
more widely used/tested makes sense.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure without neon raised since bump to
version 1.4.0 in commit 2f7f8f3813 and
https://github.com/jgaeddert/liquid-dsp/commit/c821187dd9af2758c8e3c82e95eaf041b8ac81a0:
/home/peko/autobuild/instance-0/output-1/host/bin/arm-none-linux-gnueabi-gcc -std=gnu11 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -D_FORTIFY_SOURCE=2 -ffast-math -mcpu=cortex-a7 -mfloat-abi=hard -mfpu=neon-vfpv4 -Wall -fPIC -Wno-deprecated -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I. -Iinclude -c -o src/audio/src/cvsd.o src/audio/src/cvsd.c
In file included from /home/peko/autobuild/instance-0/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/features.h:388:0,
from /home/peko/autobuild/instance-0/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/stdlib.h:24,
from src/libliquid.c:25:
/home/peko/autobuild/instance-0/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/gnu/stubs.h:10:29: fatal error: gnu/stubs-hard.h: No such file or directory
# include <gnu/stubs-hard.h>
^
Indeed, upstream considers that NEON is available on all ARM platforms,
and their configure.ac contains that code snippet:
239 arm|armv7*|armv8*)
240 # assume neon instructions are available
241 # TODO: check for Neon availability
242
243 # ARM architecture : use neon extensions
Fixes:
- http://autobuild.buildroot.org/results/36b3c2220c462e7a20262fd1b9064d9aeb6c9ec4
- http://autobuild.buildroot.org/results/881826b4b6c141e59a0da2d7d1ad55d3709fdb95
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
- refactor with LIQUID_DSP_SIMDOVERRIDE
- add comment about --disable-simdoverride
- extend commit log with upstream code snippet
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
libaio is only needed for standard install
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: fix check-package]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
trace-cmd's dependencies 'libtracefs' and 'libtraceevent' were split
into dedicated projects, maintained outside of trace-cmd.
This release, on top of bumping the version, adds this new dependencies.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
[Giulio: bump to version 3.1.7]
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr: alphabetical order in dependencies]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The RealTime Linux Analysis tool includes a set of commands that relies
on the osnoise and timerlat tracers from the ftrace kernel subsystem,
allowing to analyze the lantency sources coming from the hardware and
the kernel itself.
This tool was introduced in v5.17 but until v5.19 it relied on libprocps
that has been deprecated soon. So let's make it available for v5.19+.
Rtla relies on libtracefs and libtraceevent, although libtraceevent itself
is already a dependency for libtracefs.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
[Giulio: fix install on recent Linux versions]
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Andreas: deal with Linux Fixups, musl, SSP]
Signed-off-by: Andreas Ziegler <br015@umbiko.net>
[yann.morin.1998@free.fr: reword and extend help text]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Introduce the libtracefs library, that is used to be bundled with the
trace-cmd tool. This library is now used by several tools and libraries
such as trace-cmd and rtla, and is used as an interface to the ftrace
kernel subsystem through tracefs.
To build with meson, this package requires to disable documentation
generation, and since this is not possible add a local patch pending
upstream that adds -Ddoc=false support to libtracefs.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
[Giulio:
- bump version to 1.7.0 and add hash file
- move to meson build system
]
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Introduce the libtraceevent library, that is used to be bundled with the
trace-cmd tool. This library is now used by several tools and libraries
such as trace-cmd, libtracefs and rtla.
To build with meson, this package requires to disable documentation
generation, and since this is not possible add a local patch pending
upstream that adds -Ddoc=false support to libtraceevent.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
[Giulio:
- bump version to 1.7.3 and add hash file
- move to meson build system
]
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr:
- bump to 1.8.1, drop patch applied upstream
- add "homepage" to help text
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
--{dis,en}able-avahi is unrecognized since bump to version 2.3.3op2 in
commit 8cf034ab0f (which switched upstream
location from apple to openprinting):
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --disable-dependency-tracking, --enable-ipv6, --disable-nls, --disable-systemd, --disable-avahi
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With [1], [2] & [3] we made sure Buildroot packages get built with
proper MMU page size assumed. This was done nicely through insertion of
required flags into the toolchain wrapper so that there's no need to
pass these flags to each and every package separately - toolchain
wrapper used for real building has all set internally and so proper
flags are implicitly used.
But there's yet another corner case which is not handled that way -
these are binaries or rather libraries which are being used as a part of
GCC compilation: libgcc_s.so.1 and libstdc++.so.
And so to make sure both the libraries get built properly we need to
set TARGET_CFLAGS (cures libgcc_s.so) & TARGET_LDFLAGS (cures
libstdc++.so).
In case of ARM by defaut 64 KiB page size seems to be used, as w/o
that patch we see the following for BR2_ARM64_PAGE_SIZE_4K=y:
--------------------------->8----------------------------
$ ./output/host/bin/aarch64-linux-readelf -l ./output/target/lib/libgcc_s.so.1
Elf file type is DYN (Shared object file)
Entry point 0x0
There are 6 program headers, starting at offset 64
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000013d1c 0x0000000000013d1c R E 0x10000
LOAD 0x000000000001fd98 0x000000000002fd98 0x000000000002fd98
0x0000000000000438 0x00000000000005c8 RW 0x10000
DYNAMIC 0x000000000001fdb8 0x000000000002fdb8 0x000000000002fdb8
0x0000000000000200 0x0000000000000200 RW 0x8
$ ./output/host/bin/aarch64-linux-readelf -l ./output/target/usr/lib/libstdc++.so.6.0.32
Elf file type is DYN (Shared object file)
Entry point 0x0
There are 7 program headers, starting at offset 64
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x00000000001d3462 0x00000000001d3462 R E 0x10000
LOAD 0x00000000001d5760 0x00000000001e5760 0x00000000001e5760
0x000000000000e528 0x0000000000012de8 RW 0x10000
DYNAMIC 0x00000000001deef0 0x00000000001eeef0 0x00000000001eeef0
0x0000000000000240 0x0000000000000240 RW 0x8
--------------------------->8----------------------------
Note alignment of 0x10000 in sections marked for loading.
And with the patch applied we get expected alignment of 0x1000 (4
KiB):
--------------------------->8----------------------------
$ ./output/host/bin/aarch64-linux-readelf -l ./output/target/lib/libgcc_s.so.1
Elf file type is DYN (Shared object file)
Entry point 0x0
There are 6 program headers, starting at offset 64
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000013d1c 0x0000000000013d1c R E 0x1000
LOAD 0x0000000000013d98 0x0000000000014d98 0x0000000000014d98
0x0000000000000438 0x00000000000005c8 RW 0x1000
DYNAMIC 0x0000000000013db8 0x0000000000014db8 0x0000000000014db8
0x0000000000000200 0x0000000000000200 RW 0x8
$ ./output/host/bin/aarch64-linux-readelf -l ./output/target/usr/lib/libstdc++.so.6.0.32
Elf file type is DYN (Shared object file)
Entry point 0x0
There are 7 program headers, starting at offset 64
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x00000000001d3462 0x00000000001d3462 R E 0x1000
LOAD 0x00000000001d3760 0x00000000001d4760 0x00000000001d4760
0x000000000000e528 0x0000000000012de8 RW 0x1000
DYNAMIC 0x00000000001dcef0 0x00000000001ddef0 0x00000000001ddef0
0x0000000000000240 0x0000000000000240 RW 0x8
--------------------------->8----------------------------
A nice side effect is that we can get rid of the special handling of
"-matomic" as it's already part of ARCH_TOOLCHAIN_WRAPPER_OPTS.
[1] https://git.buildroot.net/buildroot/commit/?id=3cc2c6d19ab2e1bb4634f26f9318da9b07df5fff
[2] https://git.buildroot.net/buildroot/commit/?id=dcb74db89e74e512e36b32cea6f574a1a1ca84c4
[3] https://git.buildroot.net/buildroot/commit/?id=5e52c28397b79f8c4c99552217cbe95202166626
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vladimir Isaev <VVIsaev@gmail.com>
Signed-off-by: Pavel Kozlov <kozlov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A RISC-V 64bit EFI defconfig was added in commit 82199551
"configs/qemu_riscv64_virt_efi: new defconfig". So efivar can now be
enabled for this architecture.
This commit adds BR2_RISCV_64 in BR2_PACKAGE_EFIVAR_ARCH_SUPPORTS.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Drop all patches except first one (already in version)
- This bump will fix the following build failure with kernel >= 6.6:
/home/autobuild/autobuild/instance-2/output-1/build/dahdi-linux-3.2.0/drivers/dahdi/wct4xxp/base.c: In function ‘free_wc’:
./include/linux/workqueue.h:639:9: error: call to ‘__warn_flushing_systemwide_wq’ declared with attribute warning: Please avoid flushing system-wide workqueues. [-Werror=attribute-warning]
639 | __warn_flushing_systemwide_wq(); \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/autobuild/autobuild/instance-2/output-1/build/dahdi-linux-3.2.0/drivers/dahdi/wct4xxp/base.c:2025:9: note: in expansion of macro ‘flush_scheduled_work’
2025 | flush_scheduled_work();
| ^~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
https://github.com/asterisk/dahdi-linux/releases/tag/v3.3.0
Fixes:
- http://autobuild.buildroot.org/results/e9755e1f4814b6b0c151c590b5c34acfd89556ad
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to the latest version of the gcnano-binaries blobs, which are
compatible with the last v6.1-stm32mp-r1 kernel from the
STMicroelectronics BSP.
The location of the driver has changed it is now in the
gcnano-driver-stm32mp directory instead of an archive.
The VERSION and PREFIX temporary variable in pkgconfig file came back
therefore the sed replacement also came back.
The EULA license file has changed due to copyright year update, so its
hash has changed.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Hash of license file is changed due to:
-Copyright 2005-2022 SQLAlchemy authors and contributors <see AUTHORS file>.
+Copyright 2005-2024 SQLAlchemy authors and contributors <see AUTHORS file>.
Signed-off-by: Flávio Tapajós <flavio.tapajos@newtesc.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/5834758777
Commit e7d16c35a (boot/arm-trusted-firmware: fix the RPATH of fiptool) tried
to fix the build of host-fiptool, but forgot to pass HOST_CFLAGS.
On hosts without (compatible) openssl development headers, this breaks
the build when it cannot find the openssl headers:
fiptool_platform.h:19:11: fatal error: openssl/sha.h: No such file or directory
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following musl build failure with powerpc raised since bump to
version 2.14 in commit c6addf4606:
In file included from fault.h:36,
from handler-unix.c:77,
from handler.c:19:
handler-unix.c: In function 'sigsegv_handler':
fault-linux-powerpc.h:35:73: error: 'mcontext_t' has no member named 'uc_regs'; did you mean 'gregs'?
35 | # define SIGSEGV_FAULT_STACKPOINTER ((ucontext_t *) ucp)->uc_mcontext.uc_regs->gregs[1]
| ^~~~~~~
handler-unix.c:157:43: note: in expansion of macro 'SIGSEGV_FAULT_STACKPOINTER'
157 | uintptr_t old_sp = (uintptr_t) (SIGSEGV_FAULT_STACKPOINTER);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/77b600071f07605be3ec28e2da46d6938e240087
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
PostgreSQL has optional ICU support. So enable it if library are available.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
I will only be supporting Flutter and other packages needed by Amarula Solution
in a professional related capacity from now on.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Starting with kernel release v6.5 ARM DTS files are placed in vendor
subdirectories (Linux commit 724ba6751532 ("ARM: dts: Move .dts files to
vendor sub-directories")).
This fixes:
make[3]: *** No rule to make target 'arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dtb'. Stop.
make[2]: *** [Makefile:1384: bcm4708-smartrg-sr400ac.dtb] Error 2
make[3]: *** No rule to make target 'arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dtb'. Stop.
make[2]: *** [Makefile:1384: bcm47094-luxul-xwr-3150-v1.dtb] Error 2
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bump will fix the following libsoup3 build failure raised since
commit 9cbffdf9be:
FAILED: libsoup/libsoup-3.0.vapi
/home/buildroot/autobuild/instance-1/output-1/host/bin/vapigen --quiet --library=libsoup-3.0 --directory=/home/buildroot/autobuild/instance-1/output-1/build/libsoup3-3.4.4/build/libsoup --pkg=gio-2.0 --metadatadir=/home/buildroot/autobuild/instance-1/output-1/build/libsoup3-3.4.4/libsoup /home/buildroot/autobuild/instance-1/output-1/build/libsoup3-3.4.4/build/libsoup/Soup-3.0.gir /home/buildroot/autobuild/instance-1/output-1/build/libsoup3-3.4.4/libsoup/Soup-3.0-custom.vala
Soup-3.0.gir:6877.95-6877.95: error: The type name `GLib.TlsProtocolVersion' could not be found
https://gitlab.gnome.org/GNOME/vala/-/blob/0.56.14/NEWS
Fixes:
- http://autobuild.buildroot.org/results/732fcd20c2998e7d7b6b8f61871ad104f8d243df
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following static build failure raised since bump to version
5.38.2 in commit 41e2828c41:
/home/buildroot/autobuild/instance-3/output-1/host/lib/gcc/arc-buildroot-linux-uclibc/10.2.0/../../../../arc-buildroot-linux-uclibc/bin/ld: lib/auto/re/re.a(re_comp.o): in function `Perl_reg_add_data':
re_comp.c:(.text+0x9a24): multiple definition of `Perl_reg_add_data'; libperl.a(regcomp.o):regcomp.c:(.text+0x4f7c): first defined here
Fixes:
- http://autobuild.buildroot.org/results/c61b60430d36c5c63bd3cf0257f2193a40fb0b60
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use linux64-s390x configure target to fix the following s390x build
failure raised since bump to version 3.2.0 in commit
973b1eba5a and
https://github.com/openssl/openssl/commit/79040cf29e011c21789563d74da626b7465a0540:
/home/buildroot/autobuild/instance-3/output-1/host/lib/gcc/s390x-buildroot-linux-gnu/13.2.0/../../../../s390x-buildroot-linux-gnu/bin/ld: libcrypto.a(libcrypto-lib-dh_key.o): in function `dh_bn_mod_exp':
dh_key.c:(.text+0x3c8): undefined reference to `s390x_mod_exp'
/home/buildroot/autobuild/instance-3/output-1/host/lib/gcc/s390x-buildroot-linux-gnu/13.2.0/../../../../s390x-buildroot-linux-gnu/bin/ld: libcrypto.a(libcrypto-lib-rsa_ossl.o): in function `rsa_ossl_s390x_mod_exp':
rsa_ossl.c:(.text+0xd2c): undefined reference to `s390x_crt'
Fixes:
- http://autobuild.buildroot.org/results/77c5e13127de67a69782f138aa28c8b0ad951941
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This reverts commit 245b13a077 as docker
selinux module is for docker-engine, not for "a system tray dock for X"
Moreover, it raises the following build failure:
Compiling targeted policy.33
env LD_LIBRARY_PATH="/home/buildroot/autobuild/instance-0/output-1/per-package/refpolicy/host/lib:/home/buildroot/autobuild/instance-0/output-1/per-package/refpolicy/host/usr/lib" /home/buildroot/autobuild/instance-0/output-1/per-package/refpolicy/host/usr/bin/checkpolicy -c 33 -U deny -S -O -E policy.conf -o policy.33
policy.conf:1912:ERROR 'attribute container_engine_domain is not declared' at token ';' on line 1912:
type dockerd_t, container_engine_domain;
type dockerd_exec_t;
Fixes:
- http://autobuild.buildroot.org/results/87d78b6f15875f0fa3e6fc85e352db14ab0383bb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Yann reported in [1] that edk2 build could sometimes fail. The issue
can be reproduced when per-package directories is enabled, or also
when building on a system with GNU Make >= 4.4 using the
"--shuffle=reverse" option (such as Fedora 39). Those are pointing
toward a Makefile dependency issue.
The issue can be reproduced with commands:
cat > .config <<EOF
BR2_riscv=y
BR2_RISCV_64=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TARGET_EDK2=y
EOF
make olddefconfig
Then, building either with:
make --shuffle=reverse
Or:
utils/config -e BR2_PER_PACKAGE_DIRECTORIES
make olddefconfig
make -j$(nproc)
It is interesting to mention that when using "make --shuffle=reverse"
to build, the build can be completed if restarted only with "make". It
will not pull any other Buildroot package. This fact hints toward a
Makefile dependency issue internal to the EDK2 build system, rather
than in the Buildroot recipe.
The EDK2 build system is quite unique. See [2]. It generates files,
makefiles and internally uses GNU Make to compile code. This system is
likely not tested as being a sub-Make process in a complex Makefile
such as Buildroot.
In order to prevent Buildroot to pass unexpected Make flags to the
EDK2 sub-Make, this commit unset the MAKEFLAGS variable in the EDK2
build environment. This will put the EDK2 build script in a more
common and tested state. See GNU Make documentation about recursive use
of Make, more specifically [3].
Note: as mentioned, the build failure is likely due to an internal
issue of the EDK2 build system. The failure points to a missing
dependency in the EDK2 generator itself. This commit does not fix this
issue, but rather put the EDK2 build system in a normalized
environment, avoiding Buildroot flags being passed to the internal
EDK2 sub-Make invocation. The upstream EDK2 build system most likely
need a fix too.
Fixes:
make[2]: *** No rule to make target '/buildroot/output/build/edk2-edk2-stable202308/Build/RiscVVirtQemu/RELEASE_GCC5/RISCV64/MdeModulePkg/Application/UiApp/UiApp/DEBUG/UiApp.efi', needed by '/buildroot/output/build/edk2-edk2-stable202308/Build/RiscVVirtQemu/RELEASE_GCC5/FV/Ffs/462CAA21-7614-4503-836E-8AB6F4662331UiApp/UiApp.offset'. Stop.
build.py...
: error 7000: Failed to execute command
make tbuild [/buildroot/output/build/edk2-edk2-stable202308/Build/RiscVVirtQemu/RELEASE_GCC5/RISCV64/MdeModulePkg/Application/UiApp/UiApp]
build.py...
: error F002: Failed to build module
/buildroot/output/build/edk2-edk2-stable202308/MdeModulePkg/Application/UiApp/UiApp.inf [RISCV64, GCC5, RELEASE]
[1] https://lists.buildroot.org/pipermail/buildroot/2023-December/681507.html
[2] https://tianocore-docs.github.io/edk2-BuildSpecification/draft/4_edk_ii_build_process_overview/42_build_process_overview.html
[3] https://www.gnu.org/software/make/manual/make.html#Options_002fRecursion
Reported-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
vala bindings are needed to build gssdp 1.6 vapi bindings and avoid the
following build failure since commit
0cd1096eb0:
FAILED: vala/gssdp-1.6.vapi
/home/buildroot/autobuild/instance-2/output-1/host/bin/vapigen --quiet --library=gssdp-1.6 --directory=/home/buildroot/autobuild/instance-2/output-1/build/gssdp-1.6.3/build/vala --pkg=gio-2.0 --pkg=libsoup-3.0 --metadatadir=/home/buildroot/autobuild/instance-2/output-1/build/gssdp-1.6.3/vala /home/buildroot/autobuild/instance-2/output-1/build/gssdp-1.6.3/build/libgssdp/GSSDP-1.6.gir
error: Package `libsoup-3.0' not found in specified Vala API directories or GObject-Introspection GIR directories
Fixes:
- http://autobuild.buildroot.org/results/e5fbfc95964beac314c9faffc2c12541d0a10a48
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues:
1) CVE-2023-6377: X.Org server: Out-of-bounds memory write in XKB button actions
A device has XKB button actions for each button on the device. When a
logical device switch happens (e.g. moving from a touchpad to a mouse), the
server re-calculates the information available on the respective master
device (typically the Virtual Core Pointer). This re-calculation only
allocated enough memory for a single XKB action rather instead of enough for
the newly active physical device's number of button. As a result, querying
or changing the XKB button actions results in out-of-bounds memory reads and
writes.
This may lead to local privilege escalation if the server is run as root or
remote code execution (e.g. x11 over ssh).
2) CVE-2023-6478: X.Org server: Out-of-bounds memory read in
RRChangeOutputProperty and RRChangeProviderProperty
This fixes an OOB read and the resulting information disclosure.
Length calculation for the request was clipped to a 32-bit integer. With
the correct stuff->nUnits value the expected request size was truncated,
passing the REQUEST_FIXED_SIZE check.
The server then proceeded with reading at least stuff->nUnits bytes
(depending on stuff->format) from the request and stuffing whatever it finds
into the property. In the process it would also allocate at least
stuff->nUnits bytes, i.e. 4GB.
See also CVE-2022-46344 where this issue was fixed for other requests.
For more details, see the advisory:
https://lists.x.org/archives/xorg-announce/2023-December/003435.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure raised since bump of libxml2 to version
2.12.1 in commit d8ac52108c:
/home/buildroot/autobuild/instance-1/output-1/build/libiio-0.25/xml.c: In function 'xml_create_context':
/home/buildroot/autobuild/instance-1/output-1/build/libiio-0.25/xml.c:481:15: warning: implicit declaration of function 'xmlReadFile' [-Wimplicit-function-declaration]
481 | doc = xmlReadFile(xml_file, NULL, XML_PARSE_DTDVALID);
| ^~~~~~~~~~~
/home/buildroot/autobuild/instance-1/output-1/build/libiio-0.25/xml.c:481:43: error: 'XML_PARSE_DTDVALID' undeclared (first use in this function); did you mean 'XML_DOC_DTDVALID'?
481 | doc = xmlReadFile(xml_file, NULL, XML_PARSE_DTDVALID);
| ^~~~~~~~~~~~~~~~~~
| XML_DOC_DTDVALID
Fixes:
- http://autobuild.buildroot.org/results/f97c2db33e07a02699e4650caf97de5f3c475eb8
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure raised since bump of libxml2 to version
2.12.1 in commit d8ac52108c:
../libxml++/nodes/entityreference.cc: In member function 'xmlpp::ustring xmlpp::EntityReference::get_resolved_text() const':
../libxml++/nodes/entityreference.cc:30:35: error: invalid use of incomplete type 'struct _xmlEntity'
30 | const xmlChar* pch = cEntity->content;
| ^~
Fixes:
- http://autobuild.buildroot.org/results/f3cef04950eeaa744ebe9409561d505606375787
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test_python_ml_dtypes.py enabled BR2_PACKAGE_PYTHON3_ZLIB=y in its
configuration to workaround the fact that the toolchain used to
testing was tainted with zlib.
The commit 7e0e6e3
"toolchain/toolchain-external/toolchain-external-bootlin: update to
2023.11-1" updated the toolchains which are no longer tainted with
zlib.
The workaround is no longer needed and this commit removes this
config, for consistency.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
New toolchains have been released, with the following changes:
- The bleeding-edge toolchains are based on gcc 13.2, binutils 2.41,
gdb 14.1, kernel headers 5.10, glibc 2.38, musl 1.2.4 or uclibc-ng
1.0.45.
- The stable toolchains are based on gcc 12.3, binutils 2.40, gdb
13.2, kernel headers 4.14, glibc 2.38, musl 1.2.4 or uclibc-ng
1.0.45.
- The glibc version is no longer affected by CVE-2023-4911
- The gdb build has been fixed to no longer rely on uninstalled
libbfd.so and libopcodes.so libraries
- The zlib library, which was incorrectly present in the toolchain
sysroot, is gone, fixing various build failures encountered with
2023.08 toolchains.
- There are now toolchains for m68k 68xxx based on uclibc and musl in
addition to glibc, which was already supported
The careful reviewer will notice that a number of
depends on !BR2_ARCH_NEEDS_GCC_AT_LEAST_14
are being added to the toolchains that use gcc 13.x, as per
a0d2a5cfec
("support/scripts/gen-bootlin-toolchains: generate
BR2_ARCH_NEEDS_GCC_AT_LEAST_X guard").
All 214 test cases were successfully run:
https://gitlab.com/tpetazzoni/buildroot/-/pipelines/1120323562
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since commit
a0d2a5cfec ("support/scripts/gen-bootlin-toolchains:
generate BR2_ARCH_NEEDS_GCC_AT_LEAST_X guard"), the
gen-bootlin-toolchains script will generate references to
BR2_ARCH_NEEDS_GCC_AT_LEAST_X including potentially against the "next"
version of gcc.
Indeed, a toolchain using gcc 13.x should have a "depends on
!BR2_ARCH_NEEDS_GCC_AT_LEAST_14" so that once some architectures that
require gcc 14.x are added, such toolchains are not made visible.
In order for this to work, we must have the
BR2_ARCH_NEEDS_GCC_AT_LEAST_x symbol ready for the N+1 version of gcc
compared to the latest one we support.
As we're supporting up to gcc 13.x right now, let's introduce the
symbol BR2_ARCH_NEEDS_GCC_AT_LEAST_14 so that gcc 13.x toolchains can
be marked depends on !BR2_ARCH_NEEDS_GCC_AT_LEAST_14.
The other alternative would be to make the gen-bootlin-toolchains a
bit smarter, and not emit this depends on
!BR2_ARCH_NEEDS_GCC_AT_LEAST_14 if BR2_ARCH_NEEDS_GCC_AT_LEAST_14 does
not exist. But this would require re-running the script when
BR2_ARCH_NEEDS_GCC_AT_LEAST_14 which we are unlikely to do. While
today, when the script is invoked, the usual check-symbols complains
and reminds us that BR2_ARCH_NEEDS_GCC_AT_LEAST_14 should be added, so
we remember to do it right away.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since commit 5770a645a3 ("package/qt5:
bump packages to latest kde submodule versions"), the
QT_HEADERS_SYNC_HOOK hook no longer calls the syncqt.pl script, so
host-perl is no longer needed as a dependency of running this
hook (and as a dependency of building Qt).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
qt6base installs things in /usr/mkspecs, but also the soon to be added
qt6core5compat, and the existing package qwt as well.
So let's move the removal of /usr/mkspecs in target-finalize, where we
already remove lots of development-related directories, using a
target-finalize hook in the qt6base package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: make it a qt6base target-finalize hook]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
BR2_DOWNLOAD_FORCE_CHECK_HASHES currently has the following
dependency:
depends on BR2_GLOBAL_PATCH_DIR != ""
However, strictly speaking checking all hashes does not necessarily
require using BR2_GLOBAL_PATCH_DIR, as long as you don't use custom
versions.
But more importantly:
- Having this dependency means that this options is hidden when people
don't use BR2_GLOBAL_PATCH_DIR. Instead the option should always be
made visible, encouraging people to turn it on.
- The Config.in comment was there to mitigate this previous argument,
but this comment then shows up all the time when you have an empty
global patch dir.
This seems over-complicated, and it sounds much easier to have the
option unconditionally available, and visible, and clarify in its help
text that in order to this to work fully with custom package versions,
BR2_GLOBAL_PATCH_DIR can be used to provide extra hash files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- fix typo noticed by Peter K.
- reword kast sentence after review by Peter K.
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
With upstram commit [1] (since version v0.1.0) the pipeline option 'raspberrypi'
was renamed to 'rpi/vc4'.
Change the buildroot option name from BR2_PACKAGE_LIBCAMERA_PIPELINE_RASPBERRYPI
to BR2_PACKAGE_LIBCAMERA_PIPELINE_RPI_VC4 (and add Config.in.legacy entry
accordingly) and move handling in Config.in/libcamer.mk to follow alphabetic
ordering.
Fixes:
.../build/libcamera-v0.1.0/meson.build:3:0: ERROR: Options "raspberrypi" are not in allowed choices: "all, auto, imx8-isi, ipu3, rkisp1, rpi/vc4, simple, uvcvideo, vimc"
[1] https://git.libcamera.org/libcamera/libcamera.git/commit/?id=726e9274ea95fa46352556d340c5793a8da51fcd
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This reverts commit c9645fd29b.
Building libcamera-apps 1.3.0 with current libcamera 0.1.0 fails because
some of the symbols like controls::AeFlickerMode are not recognized.
According to my research, they have been introduced after libcamera 0.1.0
but there is no release version of libcamera newer than 0.1.0 available
to which we could bump.
Signed-off-by: Sebastian Bauer <mail@sebastianbauer.info>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
After adding GDB 14.x and making GDB 13.x the new default, let's drop
support for GDB 11.x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
All patches are still relevant, and have been rebased on top of GDB
14.1.
GDB 14.1 now needs mpfr unconditionally, so it is added as a
dependency of host-gdb, and of gdb when the full debugger is built.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- add comment about selecting mpfr for 14.x or later
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A few package or config removals have been introduced after the 2023.11
release, but there entries were still added to the list of options
removed in 2023.11.
The affected commits are:
64a5831679 package/libmpd: remove package
f93380ab1a package/gmpc: remove package
6d8c7aecbb package/flickcurl: remove package
f6acde11ab package/onevpl: rename package to libvpl
fffb245f66 package/linux-headers: drop 6.5.x option
Introduce the 2024.02 section and move the 2023.11 one to where it
belongs.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since GDB 13.x and upstream commit
b686ecb5b10be9a33ab8f1bfdcff22eef920d1a5 ("gdb: link executables with
libtool"), gdb will be linked against the shared variants of libbfd
and libopcodes if they exist. However, this causes host gdb and target
gdb to not work, because our gdb package does not install libbfd and
libopcodes (to not clash with the ones potentially installed by
binutils).
In order to get around this, this commit proposes to get back to the
situation we had before GDB 13.x: libbfd and libopcodes are only
compiled as static libraries, so that they are linked directly inside
the gdb binary, avoiding the problem entirely.
This resolves:
# gdb --version
gdb: error while loading shared libraries: libopcodes-2.39.50.so: cannot open shared object file: No such file or directory
for target gdb, and:
$ ./host/bin/arm-linux-gdb --version
./host/bin/arm-linux-gdb: error while loading shared libraries: libopcodes-2.39.50.so: cannot open shared object file: No such file or directory
for host gdb.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Following the removal of gmpc, we can drop libmpd as well, which was
apparently developed/maintained by the same group of people. The URL
in Config.in, http://gmpcwiki.sarine.nl/index.php?title=Libmpd, no
longer works, and no new alternative upstream was found.
The reference MPD client library is libmpdclient, which is still
maintained.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Drop patches (already in version) and so drop autoreconf
- Fix the following security issues:
- CVE-2023-40660: Fix Potential PIN bypass
- CVE-2023-40661: Important dynamic analyzers reports
- CVE-2023-4535: Out-of-bounds read in MyEID driver handling
encryption using symmetric keys
https://github.com/OpenSC/OpenSC/releases/tag/0.24.0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The default terminal used by sway is the foot terminal. Add a note in
the Config.in explaining that if a user is using the default sway config,
it is recommended to also enable the foot package.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a config option to build sway with swaybar support.
- The bar requires dejavu fonts.
- If bash-completions is selected, JQ is required.
- Select dmenu-wayland as a runtime dependency.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: jq is a runtime dependency too]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
From foot/INSTALL.md:
```
As of ncurses 2021-07-31, ncurses includes a version of foot’s
terminfo. **The recommendation is to use those**, and only install the
terminfo definitions from this git repo if the system’s ncurses
predates 2021-07-31.
```
So it is best to follow the instructions and install the foot terminfo
provided by ncurses.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is the default terminal sway uses.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: add comment only for first-order deps]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The traditional dmenu is only running under X; dmenu-wayland is an
implementation that runs only on (some) wayland compositors; Sway
uses it by default as its menu bar.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr:
- _SYNC_4 is an arch dependency, so comment should be hidden
- add a few missing comments for first-level dependencies
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since upstream commit
https://github.com/ImageMagick/ImageMagick/commit/25e3a4f3845f59536d19aba0ac0580aa6715147f
(which first appeared in version 7.1.1-19), ImageMagick does not trust
unvalidated XMP profiles in images anymore.
If such a XML profile is encountered inside e.g. a PNG image the
processing is aborted. Validating the XMP profile requires that
ImageMagick is compiled with XML support.
As host-imagemagick supports PNG file also activate XML support.
Signed-off-by: Christian Hitz <christian.hitz@bbv.ch>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig enables edk2 UEFI shell and grub2 riscv64-efi boot
of a Linux Kernel.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Drop no longer needed
0001-mainline-version-gcc-13-cannot-use-uintptr_t-via-inc.patch as
it was a backport from upstream
- Updated license hash due to numerous additions of licenses, and
updated copyright years. The LICENSE variable was updated
accordingly, and clarified
- zlib is now a mandatory dependency, it is not checked at configure
time, but <zlib.h> is uncondtionnally included, and libzlib is
linked in unconditionnally. See
https://chromium.googlesource.com/breakpad/breakpad/+/de086a98595f68715c1dce9860f77014a2a1b187
- explicitly disable zstd support, which was added in upstream commit
https://chromium.googlesource.com/breakpad/breakpad/+/9ea5b228f560580f85df895c2f117d7e43340935. This
requires adding AUTORECONF = YES because the pre-generated
configure/Makefile.in available in the Git repository is out of
date, and links unconditionnally with -lzstd, even when
--disable-zstd is passed.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[Thomas: handle zlib dependency, handle zstd option, fix LICENSE variable]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
grub2 build is failing, when compiled on host system not including
gawk and host-gawk is not built by another package before. This can
be the the case on current Buildroot Docker image, based on Debian,
which includes mawk.
grub2 was updated in commit 5baf1ffe7e "boot/grub2: bump to version
2.12". This version includes the commit [1], which introduced the use
of the asorti() awk function. This function is a specific gawk
builtin extension. See [2].
This commit fixes this issue by adding host-gawk as a dependency.
Fixes:
mawk: ../../grub-core/genmoddep.awk: line 110: function asorti never defined
make[4]: *** [Makefile:49030: moddep.lst] Error 1
make[4]: Leaving directory '/buildroot/output/build/grub2-2.12/build-i386-pc/grub-core'
make[3]: *** [Makefile:28116: all] Error 2
make[3]: Leaving directory '/buildroot/output/build/grub2-2.12/build-i386-pc/grub-core'
make[2]: *** [Makefile:11714: all-recursive] Error 1
make[2]: Leaving directory '/buildroot/output/build/grub2-2.12/build-i386-pc'
make[1]: *** [Makefile:3547: all] Error 2
make[1]: Leaving directory '/buildroot/output/build/grub2-2.12/build-i386-pc'
make: *** [package/pkg-generic.mk:283: /buildroot/output/build/grub2-2.12/.stamp_built] Error 2
[1] https://git.savannah.gnu.org/gitweb/?p=grub.git;a=commitdiff;h=87648e9c12a32bddb005b899edc44c2c9c63df82
[2] https://www.gnu.org/software/gawk/manual/gawk.html#Sorting-Array-Values-and-Indices-with-gawk
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
[Thomas: improved with a more complete patch provided by upstream
developer.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As we're about to update libxml2 to version 2.12, let's first fix a
build issue that would occur with squid by backporting an upstream
patch.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The linux defconfig 'bb.org_defconfig' is the best for beagleboard.
To load compressed kernel modules, kmod and xz packages are needed
because busybox doesn't support it.
Bump U-Boot to version 2023.10. The uboot-tools package is no need.
Tested on beaglebone black.
[1] https://github.com/beagleboard/linux/releases/tag/6.1.46-ti-r13
Signed-off-by: Scott Fan <fancp2007@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The runscript and rc binaries have been removed in this release. However,
Buildroot does not use those binaries, so only a simple version bump is
necessary.
Fixes:
- cgroups being inconsistent
- Start-stop-daemon did not work correctly on Linux 6.6
Tested on Debian 11 and Fedora 39 with the following command:
./support/testing/run-tests tests.init.test_openrc
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit d344ffe624 (configs/rock5b: add hash for custom uboot)
explicitly noted that the kernel was retrieved from a git-clone, so the
sha1 of the commit was enough to get what we expect.
However, that does not account for the fact that the upstream repository
can disapear or be temporarily unavailable (maliciously or not). In that
case, the kernel archive will be looked up on the backup mirror.
In that case, the download is via wget over https, which protects the
transport, but does not guarantee that the remote server serves the
expected archive.
The hash file was dropped when d344ffe624 was applied; restore it.
Since the defconfig now has hashes for all its downloads, enforce
checking hashes.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The defconfig uses a custom uboot version, downloaded with wget, so we
weant to be sure that it does not get modified on the server, so we add
a hash for it.
The kernel we get from a git clone, so the sha1 of the commit is enough
to be sure that what we get is what we expect (because we do a local
tarball out of a git clone).
Since we only get a hash for uboot and not for the kernel, we don't
enable BR2_DOWNLOAD_FORCE_CHECK_HASHES.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since upstream commit
eec95e3d5e1a4f2e13b1f6b34cc287475ca57daf ("backend/drm: use pnp.ids to
fetch EDID data"), the pnp.ids file from hwdata is parsed at build
time to generate a C source file. As per backend/drm/meson.build:
hwdata = dependency('hwdata', required: false, native: true)
if hwdata.found()
hwdata_dir = hwdata.get_variable(pkgconfig: 'pkgdatadir')
pnp_ids = files(hwdata_dir / 'pnp.ids')
else
pnp_ids = files('/usr/share/hwdata/pnp.ids')
endif
This is only needed when the DRM backend of wlroots is enabled, but
currently, Buildroot enables this backend unconditionally.
This failure can be reproduced using the following defconfig:
BR2_x86_64=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_OSMESA_GALLIUM=y
BR2_PACKAGE_MESA3D_OPENGL_EGL=y
BR2_PACKAGE_MESA3D_OPENGL_ES=y
BR2_PACKAGE_WLROOTS=y
The issue was not caught in the autobuilders because the last
successful build of a configuration that includes wlroots dates back
from 2022-05-05, at which time Buildroot had wlroots 0.15.1.
This change in wlroots was introduced in wlroots 0.16.0, which means
that it's only since Buildroot bumped from 0.15.1 to 0.16.2 in
d6279bc82c ("package/wlroots: bump to
version 0.16.2") that the issue occurs. This commit is not yet in any
tagged release, so there is no need to backport this fix.
It should be noted that the proposed patch also installs pnp.ids to
the target filesystem, while it is in practice not needed at runtime
by wlroots. However, our current hwdata packaging doesn't allow
installing it only in staging, and since wlroots anyway implies we're
building a fairly heavy graphics stack, the size overhead of hwdata is
deemed to be an acceptable trade-off.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[Thomas: further extend the commit log, with details gathered by Yann
and myself.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
According to the Debian changelog, it doesn't seem like there is any
security issue addressed between 6.2.10 and 6.2.12:
unrar-nonfree (1:6.2.12-1) unstable; urgency=medium
* New upstream version 6.2.12
* Rediff patches
-- YOKOTA Hiroshi <yokota.hgml@gmail.com> Thu, 05 Oct 2023 20:49:53 +0900
unrar-nonfree (1:6.2.11-1) unstable; urgency=medium
* New upstream version 6.2.11
-- YOKOTA Hiroshi <yokota.hgml@gmail.com> Wed, 20 Sep 2023 21:41:29 +0900
Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As described in the announcement, this fixes a security issue:
There is one security fix in this release:
- Fix for a newly discovered security issue known as the 'Terrapin'
attack, also numbered CVE-2023-48795. The issue affects widely-used
OpenSSH extensions to the SSH protocol: the ChaCha20+Poly1305
cipher system, and 'encrypt-then-MAC' mode.
In order to benefit from the fix, you must be using a fixed version
of PuTTY _and_ a server with the fix, so that they can agree to
adopt a modified version of the protocol. Alternatively, you may be
able to reconfigure PuTTY to avoid selecting any of the affected
modes.
If PuTTY 0.80 connects to an SSH server without the fix, it will
warn you if the initial protocol negotiation chooses an insecure
mode to run the connection in, so that you can abandon the
connection. If it's possible to alter PuTTY's configuration to
avoid the problem, then the warning message will tell you how to do
it.
https://lists.tartarus.org/pipermail/putty-announce/2023/000037.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
RISC-V 64bit qemu virt machine support has been added in edk2
version "stable202302". See [1].
Since edk2-stable202308, introduced in buildroot in commit 5c9f310
"boot/edk2: bump to version edk2-stable202308", it is now possible
to boot the edk2 UEFI shell in qemu.
This commit adds this early RISC-V support to edk2.
The RISC-V edk2 UEFI shell can be booted in Buildroot with the
following commands:
# Build EDK2 images
cat > .config <<EOF
BR2_riscv=y
BR2_RISCV_64=y
BR2_PACKAGE_HOST_QEMU=y
BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE=y
BR2_TARGET_EDK2=y
EOF
make olddefconfig
make
# edk2 image size should fit the 32MB of qemu pflash memories
truncate -s 32M output/images/RISCV_VIRT_CODE.fd
truncate -s 32M output/images/RISCV_VIRT_VARS.fd
# Start qemu:
output/host/usr/bin/qemu-system-riscv64 \
-M virt,pflash0=pflash0,pflash1=pflash1,acpi=off \
-nographic \
-blockdev node-name=pflash0,driver=file,read-only=on,filename=output/images/RISCV_VIRT_CODE.fd \
-blockdev node-name=pflash1,driver=file,filename=output/images/RISCV_VIRT_VARS.fd
Note: a Qemu version >= 8.0.0 is needed to properly start edk2. A qemu
version on the host system might not be sufficient. This is why the
Buildroot host-qemu is built in this config example.
[1] https://github.com/tianocore/edk2/releases/tag/edk2-stable202302
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
After 10 years we don't have to justify the fork anymore, as it has been
the new upstream for that long now.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
For release announce on mailing list, see [1].
For release general news, see [2].
This commit removes all package patches, as they are all included in
this version.
The .checkpackageignore file is updated accordingly (the entry for
patch 0001 is removed).
This commit also removes GRUB2_AVOID_AUTORECONF hooks, since patch
0001 is removed.
This commit also removes the GRUB2_IGNORE_CVES entries associated to
the removed patches. The version bump should now explicitly exclude
those CVEs. For patches 8 and 9, the upstream commit IDs were
incorrectly recorded:
- patch 8 mentioned d5caac8ab79d068ad9a41030c772d03a4d4fbd7b while
the actual commit is 5bff31cdb6b93d738f850834e6291df1d0b136fa
- patch 9 mentioned 166a4d61448f74745afe1dac2f2cfb85d04909bf while
the actual commit is 347880a13c239b4c2811c94c9a7cf78b607332e3
Finally, this commit introduces a new patch, adding a missing file in
the release tarball.
[1] https://lists.gnu.org/archive/html/grub-devel/2023-12/msg00052.html
[2] https://git.savannah.gnu.org/gitweb/?p=grub.git;a=blob;f=NEWS;hb=refs/tags/grub-2.12
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Adds BR2_PACKAGE_LIBOPENSSL_TARGET_ARCH for riscv32 and riscv64.
Otherwise, riscv targets fall back to the linux-generic libopenssl
configs. This exacerbates the issue partially addressed in
openssl/openssl#22871 which causes build failures.
Fixes a mispelling in upstream causing 0builds for riscv32 to fail when
linking.
Signed-off-by: Grant Nichol <me@grantnichol.com>
[yann.morin.1998@free.fr: squash the two commits together]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
5 CVEs affecting glibc according to the NVD database are considered as
not being security issues by upstream glibc developers:
* CVE-2010-4756: The glob implementation in the GNU C Library (aka
glibc or libc6) allows remote authenticated users to cause a denial
of service (CPU and memory consumption) via crafted glob expressions
that do not match any pathnames. glibc maintainers position: "That's
standard POSIX behaviour implemented by (e)glibc. Applications using
glob need to impose limits for themselves"
* CVE-2019-1010022: GNU Libc current is affected by: Mitigation
bypass. The impact is: Attacker may bypass stack guard
protection. The component is: nptl. The attack vector is: Exploit
stack buffer overflow vulnerability and use this bypass
vulnerability to bypass stack guard. NOTE: Upstream comments
indicate "this is being treated as a non-security bug and no real
threat. glibc maintainers position: "Not treated as a security issue
by upstream https://sourceware.org/bugzilla/show_bug.cgi?id=22850"
* CVE-2019-1010023: GNU Libc current is affected by: Re-mapping
current loaded library with malicious ELF file. The impact is: In
worst case attacker may evaluate privileges. The component is:
libld. The attack vector is: Attacker sends 2 ELF files to victim
and asks to run ldd on it. ldd execute code. NOTE: Upstream comments
indicate "this is being treated as a non-security bug and no real
threat. glibc maintainers position: "Not treated as a security issue
by upstream https://sourceware.org/bugzilla/show_bug.cgi?id=22851"
* CVE-2019-1010024: GNU Libc current is affected by: Mitigation
bypass. The impact is: Attacker may bypass ASLR using cache of
thread stack and heap. The component is: glibc. NOTE: Upstream
comments indicate "this is being treated as a non-security bug and
no real threat. glibc maintainers position: "Not treated as a
security issue by upstream
https://sourceware.org/bugzilla/show_bug.cgi?id=22852"
* CVE-2019-1010025: GNU Libc current is affected by: Mitigation
bypass. The impact is: Attacker may guess the heap addresses of
pthread_created thread. The component is: glibc. NOTE: the vendor's
position is "ASLR bypass itself is not a vulnerability. Glibc
maintainers position: "Not treated as a security issue by upstream
https://sourceware.org/bugzilla/show_bug.cgi?id=22853"
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As reported in bug 15895, the GLIBC_VERSION field having a value
looking like 2.38-27-g750a45a783906a19591fb8ff6b7841470f1f5701, it
prevents the CPE/CVE matching with the NVD database to work correctly.
This commit fixes that by defining GLIBC_CPE_ID_VERSION, derived from
GLIBC_VERSION, by extracting the base version.
Also, we update GLIBC_IGNORE_CVES to account for the CVEs that have
clearly been fixed between 2.38 and
2.38-27-g750a45a783906a19591fb8ff6b7841470f1f5701. There are a number
of other CVEs still affecting the glibc package, but they are not
related to this
2.38...2.38-27-g750a45a783906a19591fb8ff6b7841470f1f5701 range.
Fixes: #15895
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
According to the source file:
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add new python-contourpy runtime dependency.
Add new python-pybind dependency.
Add new host-python-setuptools-scm build dependency.
Update setup.cfg to new mplsetup.cfg install location.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add new python-urwid-readline runtime dependency.
Add new python-packaging runtime dependency.
Remove no longer required python-setuptools runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
this file could be required by some native modules
note: compat-5.3.c is included by compat-5.3.h
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
the project has moved to the organization “Lunar Modules”,
see https://github.com/lunarmodules/
diff LICENCE:
-Copyright (c) 2015 Kepler Project.
+Copyright (C) 1994-2020 Lua.org, PUC-Rio.
+Copyright (C) 2013-2023 The Lua-Compat-5.3 authors.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It turns out that wildcard expansion, * and ?, is not performed in
matching lists {...}, at least in the vim plugin. The spec is not clear
about that, but refer to "pattern matching through Unix shell-style
wildcards" [0].
So, let's consider that this is not supported. Expand the patterns into
one section each, rather than use a list.
[0] https://spec.editorconfig.org/
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
OpenSSH 9.6 was released on 2023-12-18.
This release contains fixes for a newly-discovered weakness in the
SSH transport protocol (the "Terrapin" attack), a logic error relating
to constrained PKCS#11 keys in ssh-agent(1) and countermeasures for
programs that invoke ssh(1) with user or hostnames containing invalid
characters.
https://www.openssh.com/txt/release-9.6
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Git shortlog:
Ben Wolsieffer (3):
fork: generate stub on no-MMU systems
arm: elf-fdpic.h: avoid void pointer subtraction
libpthread/nptl: make default stack size configurable
Greg Ungerer (1):
elf: support ELF binaries in noMMU
Marcus Haehnel (3):
fnmatch: fix possible access beyond of parameter string
getaddrinfo.c: Avoid misleading indentation warning
linuxthreads: Avoid unused variable warning
Marcus Hähnel (1):
setjmp.h: Fix C++ build and avoid duplicate throw declaration
Max Filippov (1):
daemon.c: make _fork_parent static inline again
Paul Iannetta (1):
kvx: fix asm syntax
Pavel Kozlov (6):
setrlimit/getrlimit: fix prlimit64 syscall use for 32-bit CPUs
Fix -Warray-parameter warning for __sigsetjmp
prlimit: add name redirection and fix incorrect parameters to syscall
arc: add acq/rel variants for atomic cmpxchg/xchg
arc: remove read ahead in asm strcmp code for ARCHS
rlimit: fix 64-bit RLIM64_INFINITY macro
Waldemar Brodkorb (8):
aarch64: add hwcap header file
fcntl.h: declare f_owner_ex for all architectures
arm: add hwcap header file
lm32: disable ctor/dtor
aarch64: disable lazy relocations
riscv64: define __NR_riscv_flush_icache if not available
depend on __UCLIBC_HAVE_STATX__
bump version for 1.0.45 release
Yann Sionneau (9):
fstatat64: define it as a wrapper of statx if the kernel does not support fstatat64 syscall
fstat: add missing return value statement for the statx wrapping case
add support for systems without legacy setrlimit/getrlimit syscalls
fstatat: add wrapper that uses statx for non-legacy arch
kvx: add support for kv3-2 (Coolidge v2 SoC)
kvx: atomic: rework using compiler builtins
kvx: align specification of user regs
kvx: define that kvx port supports statx syscall
kvx: use a custom stat.h header
lordrasmus (8):
add vsdo support
fix file permissions
fix getauxval() on aarch64 gcc 11
vdso support missing file
c6x compile fix vdso support
gettimeofday() only include ldso.h if vdso support is activated
vdso support for x86_64
gitignore
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The 6.5.x series is now EOL upstream, so drop the linux-headers option
and add legacy handling for it.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
[Peter: drop option from linux-headers/Config.host.in]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the update of Python to version 3.11 in commit
738500c296 ("package/python3: bump to
version 3.11.0"), python-sip fails to compile with:
siplib.c: In function ‘sip_api_get_frame’:
siplib.c:13750:22: error: invalid use of undefined type ‘struct _frame’
13750 | frame = frame->f_back;
This is due to a change in the Python C API, which is fixed by a new
patch. The patch can't be upstreamed, as SIP 4.x is no longer
maintained upstream.
Fixes:
http://autobuild.buildroot.net/results/7b01739e7514e48c06182bc1804b32497ce2e414/
Signed-off-by: Ralf Dragon <hypnotoad@lindra.de>
[Thomas: improved commit log, reformatted patch using Git]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues:
- CVE-2023-5367 X.Org server: OOB write in
XIChangeDeviceProperty/RRChangeOutputProperty
- CVE-2023-5380: Use-after-free bug in DestroyWindow
- CVE-2023-5574: Use-after-free bug in DamageDestroy
For details, see the advisory:
https://lists.x.org/archives/xorg-announce/2023-October/003430.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
rsync is used in the infrastructure, mostly for the per-package infra,
and for the override-srcdir mechanism, but also to build the manual.
As such, it is not optional but mandatory, and already listed so.
Drop the reference to rsync from the list of optional packages.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2023-46218: cookie mixed case PSL bypass
This flaw allows a malicious HTTP server to set "super cookies" in curl
that are then passed back to more origins than what is otherwise allowed
or possible. This allows a site to set cookies that then would get sent
to different and unrelated sites and domains.
https://curl.se/docs/CVE-2023-46218.html
- CVE-2023-46219: HSTS long file name clears contents
When saving HSTS data to an excessively long file name, curl could end up
removing all contents, making subsequent requests using that file unaware
of the HSTS status they should otherwise use.
https://curl.se/docs/CVE-2023-46219.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The prebuilt kernel has been updated to 5.10.202, sync the kernel
built by TestDtbocfg.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The prebuilt kernel has been updated to 5.10.202, sync the kernel
built by InitSystemSystemdBaseOverlayfs.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update the zynq readme.txt to add documentation for the zc702 and correct
documentation that was no longer up to date.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Let's also enable NXP firmware package to let latest SDMA firmware to be
loaded. To achieve this we also need to enable dynamic eudev to let it to
load the firmware as it is requested early before the rootfs is mounted.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Peter: explain why eudev is needed]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Let's also enable NXP firmware package to let latest SDMA firmware to be
loaded. To achieve this we also need to enable dynamic eudev to let it
load the firmware as it is requested early before the rootfs is mounted.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
[Peter: explain why eudev is needed]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop patches (already in version)
This bump will fix the following build failure raised since bump of
leptonica to version 1.83.1 in commit
a4e713558d thanks to
https://github.com/tesseract-ocr/tesseract/commit/27b1827ccde6014df1231e1cec6263ee108066e9:
src/textord/devanagari_processing.cpp: In member function 'bool tesseract::ShiroRekhaSplitter::Split(bool, tesseract::DebugPixa*)':
src/textord/devanagari_processing.cpp:130:19: error: invalid use of incomplete type 'struct Pixa'
130 | Box *box = ccs->boxa->box[i];
| ^~
In file included from /home/autobuild/autobuild/instance-5/output-1/host/bin/../s390x-buildroot-linux-gnu/sysroot/usr/include/leptonica/alltypes.h:52,
from /home/autobuild/autobuild/instance-5/output-1/host/bin/../s390x-buildroot-linux-gnu/sysroot/usr/include/leptonica/allheaders.h:35,
from src/textord/devanagari_processing.h:16,
from src/textord/devanagari_processing.cpp:25:
/home/autobuild/autobuild/instance-5/output-1/host/bin/../s390x-buildroot-linux-gnu/sysroot/usr/include/leptonica/bmf.h:48:12: note: forward declaration of 'struct Pixa'
48 | struct Pixa *pixa; /*!< pixa of bitmaps for 93 characters */
| ^~~~
https://github.com/tesseract-ocr/tesseract/blob/5.3.3/ChangeLog
Fixes:
- http://autobuild.buildroot.org/results/46d3ffc8885245ee9a56a528be055b0b27a18245
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 6b915358ba introduced PKG_PYTHON_MATURIN_INSTALL_CMD while
it should be HOST_PKG_PYTHON_MATURIN_INSTALL_CMD.
Adding any new host python package using maturin setup type will
fail during the install step.
Fixes: 6b915358ba
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Updated to gcc 13.2, gdb 13, binutils 2.41, glibc 2.38.
The x86_64 host variant prebuilt toolchain is built on RHEL7
(glibc 2.17) and is likely also be useable on OS versions like
RHEL8, Ubuntu 18.04 or later.
The AArch64 host variant prebuilt toolchain is built on Ubuntu 18.04
(glibc 2.27) is likely also be useable on OS versions like RHEL8,
Ubuntu 18.04 or later.
Release note:
https://developer.arm.com/downloads/-/arm-gnu-toolchain-downloads
Signed-off-by: Antoine Coutant <antoine.coutant@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Updated to gcc 13.2, gdb 13, binutils 2.41, glibc 2.38.
The x86_64 host variant prebuilt toolchain is built on RHEL7
(glibc 2.17) and is likely also be useable on OS versions like
RHEL8, Ubuntu 18.04 or later.
The AArch64 host variant prebuilt toolchain is built on Ubuntu 18.04
(glibc 2.27) is likely also be useable on OS versions like RHEL8,
Ubuntu 18.04 or later.
Tested with qemu_aarch64_virt_defconfig.
Release note:
https://developer.arm.com/downloads/-/arm-gnu-toolchain-downloads
Signed-off-by: Antoine Coutant <antoine.coutant@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Updated to gcc 13.2, gdb 13, binutils 2.41, glibc 2.38.
The x86_64 host variant prebuilt toolchain is built on RHEL7
(glibc 2.17) and is likely also be useable on OS versions like
RHEL8, Ubuntu 18.04 or later.
The AArch64 host variant prebuilt toolchain is built on Ubuntu 18.04
(glibc 2.27) is likely also be useable on OS versions like RHEL8,
Ubuntu 18.04 or later.
Tested with qemu_arm_vexpress_defconfig.
Release note:
https://developer.arm.com/downloads/-/arm-gnu-toolchain-downloads
Signed-off-by: Antoine Coutant <antoine.coutant@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The arm-trusted-firmware package builds a host tool called "fiptool",
which is used during the build process of arm-trusted-firmware
itself. This tool links against the OpenSSL host library, and
therefore needs to be built with the correct RPATH pointing to
$HOST_DIR/lib.
This is why commit a957d9a90a
("boot/arm-trusted-firmware: build fiptool separately with dependency
o n host-openssl") added the ARM_TRUSTED_FIRMWARE_BUILD_FIPTOOL
variable, which builds the fiptool tool first, with the right
variables set, before invoking the full build of TF-A. This ensured
that fiptool was built with the correct RPATH.
However, more recent versions of TF-A have modified their Makefile
machinery, and fiptool is being rebuilt even if it was built
before. Unfortunately, this rebuild is no longer done with the right
flags, so we end up with a fiptool binary that no longer has the right
RPATH, and fiptool fails to find the OpenSSL libraries from
$HOST_DIR/lib.
In order to fix this, we take a different approach: we do not build
fiptool separately first, but we inject the necessary flags through
the HOSTCC variable. Indeed, there's no HOST_LDFLAGS or HOST_LDLIBS
variable or similar that would allow us to pass the -Wl,-rpath flag
that is needed. Shoe-horning this flag into HOSTCC gets the job done,
and actually simplifies our arm-trusted-firmware.mk.
This patch break the compatibility with version prior to 1.4 (upstream
commit 72610c4102990 ("build: Introduce HOSTCC flag")). v1.4 is very old
(July 2017), not used anymore in-tree and probably not used anymore
outside the tree.
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-authored-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When an error occurs, the gitlab-ci job log doesn't contain any useful
information than the name of the failing test:
FAIL: test_run (tests.package.test_python_paho_mqtt.TestPythonPahoMQTT)
In order to encourage contributors to investigate issues reported by
gitlab-ci, we want to print the last lines of the log file (build or
runtime).
Unfortunately, gitlab-ci job log completely strips lines ending with
CRCRLF [1][2]. We have to take a look at the gitlab-ci raw log to see
the complete log [3].
To workaround this issue, remove crlf from qemu serial stdio log
while printing in the gitlab-ci job log (we don't want to change
the log file generated by support/testing/run-tests and saved as
artefacts).
[1] https://gitlab.com/gitlab-org/gitlab/-/issues/218771
[2] https://gitlab.com/kubu93/buildroot/-/jobs/5492937691
[3] https://gitlab.com/kubu93/buildroot/-/jobs/5492937691/raw
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The zynq_qmtech_defconfig has not been maintained for 3 years, and is now
using a very out of date u-boot and Linux kernel. Since there are 4 other
zynq7000 defconfigs available in buildroot and Julien no longer has a
functional board, drop the defconfig.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Acked-by: Julien Olivain <ju.o@free.fr>
[Peter: reword commit message]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the versal_vck190_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30 with additional bug fixes
- U-Boot v2023.01 with additional bug fixes
- ATF v2.8 with additional bug fixes
- PLM xilinx_v2023.2
- PSMFW xilinx_v2023.2
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynqmp_kria_kv260_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30 with additional bug fixes
- U-Boot v2023.01 with additional bug fixes
- ATF v2.8 with additional bug fixes
- PMUFW xilinx_v2023.2
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynqmp_zcu106_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30 with additional bug fixes
- U-Boot v2023.01 with additional bug fixes
- ATF v2.8 with additional bug fixes
- PMUFW xilinx_v2023.2
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynqmp_zcu102_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30 with additional bug fixes
- U-Boot v2023.01 with additional bug fixes
- ATF v2.8 with additional bug fixes
- PMUFW xilinx_v2023.2
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for Xilinx Kria KR260 starter kit.
KR260 features can be found here:
https://www.xilinx.com/products/som/kria/kr260-robotics-starter-kit.html
While the Kria SOM is based on a ZynqMP SoC, there are some key
boot config differences from the other ZynqMP evaluation boards.
1. There are no boot switches on Kria SOMs. The boot mode is thus
hard configured for QSPI flash. A pre-programmed boot.bin comes
with every Starter Kit. U-Boot can then find the Linux kernel and
file system on the SD card.
Optional instructions for updating the boot.bin in the QSPI flash
can be found in the readme.txt file and the link below.
https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM
2. Kria SOMs use UART1 for the console instead of UART0. For this
reason, Kria Starter Kits will use a separate extlinux.conf file
from other ZynqMP evaluation boards.
3. The KR260 has a USB to SD card bridge, so the Linux kernel
and file system are found on /dev/sda1 and /dev/sda2.
Signed-off-by: Neal Frager <neal.frager@amd.com>
[Peter: fix kr260.sh shellcheck warnings, similar to kv260.sh]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add firmware files for RTL8851 and RTL8852 cards used by the rtlbt driver.
Signed-off-by: Jan Čermák <sairon@sairon.cz>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 51d6d6c580.
That change is no more relevant since the genimage.cfg files are
generated by the commit e37ee5acdc (board/raspberrypi/post-image.sh:
generate genimage config from template if not present), and since the
variant-specific files were dropped off by the commit fc5cdeed72
(board/raspberrypi: drop variant-specific genimage files).
This removes the very last alive piece of change of the commit
51d6d6c580 (Fix rasberry Pi 64bit firmware overlay inclusion); the
commit is fully reverted now.
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 6021f3678b.
That change is no more relevant since the genimage.cfg files are
generated by the commit e37ee5acdc (board/raspberrypi/post-image.sh:
generate genimage config from template if not present), and since the
variant-specific files were dropped off by the commit fc5cdeed72
(board/raspberrypi: drop variant-specific genimage files).
This removes the very last alive piece of change of the commit
6021f3678b (board/raspberrypi: handle dtb overlays for all variants);
the commit is fully reverted now.
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As upstream developer mentioned in private communication, the code using
NETDB_INTERNAL is now disabled. Remove the patch.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the latest
U-Boot 2023.10 and ATF 2.9. Increase ext2 partition size to fit
new versions.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update README hash for changed not related to license.
Change patch 0001 to git format. socat is now hosted on git. Also,
update to apply to current version.
Add upstream status to both patches.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Although pydantic-core likely implements a subset of the functionality
in pydantic 1.10.8 as we currently package, there will not be any
conflict as the modules namespace differ:
import pydantic # 1.10.8
import pydantic_core
So, we can add pydantic-core, then bump pydantic; we don't need to do
both in the same commit.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr: add explanations from James about no-conflict]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
These variables were removed. In addition, the text describing them
wasn't terribly useful. Just remove the sentences describing them.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The _BASE_INSTALL*_CMD variables are set based on the setup type, and
only based on the setup type. Because of this, we have a large
conditional tree in inner-python-package which makes things hard to
read.
Rather than conditions, it's also possible to use indirect variables.
Concretely, we can define PKG_PYTHON_DISTUTILS_INSTALL_TARGET_CMD etc.,
and use $(PKG_PYTHON_$($(PKG)_SETUP_TYPE)_INSTALL_TARGET_CMD) instead of
$($(PKG)_BASE_INSTALL_TARGET_CMD) to dispatch to the right
_INSTALL_TARGET_CMD variable. The same applies to _INSTALL_STAGING_CMD
and HOST_..._INSTALL_CMD.
Since the _INSTALL*_OPTS variables are not (or no longer) used anywhere
else, we can fold them into the _INSTALL*_CMD variables.
setuptools-rust, flit and maturin didn't have their own definition of
_BUILD_CMD but were under the setuptools resp. pep517 condition. For
these, we have to define new variables that copy the value from
PKG_PYTHON_SETUPTOOLS_BUILD_CMD resp. PKG_PYTHON_PEP517_BUILD_CMD.
The condition tree is now empty, except for the error handling. Rework
the conditions for the error handling and remove all other conditions.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In a follow-up patch, we want to remove this variable. Replace it with
its expansion, which is anyway just
$(PKG_PYTHON_SETUPTOOLS_INSTALL_OPTS) --root=$(TARGET_DIR)
Also remove PKG_PYTHON_SETUPTOOLS_BUILD_OPTS, which is not defined (i.e.
empty).
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In a follow-up patch, we want to remove this variable. Replace it with
its expansion, which is anyway just
$(PKG_PYTHON_SETUPTOOLS_INSTALL_OPTS) --root=$(TARGET_DIR)
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
[yann.morin.1998@free.fr:
- fixup after introduction of JAILHOUSE_INSTALL_HELPER_SCRIPTS
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The usual way of having conditional build and installation of parts
of a generic-package, is to conditionally define macros that do that
build and installation, and unconditionally expand the macros in the
_BUILD_CMDS and _INSTALL_CMDS.
Do that in jailhouse, which used to use an ad-hoc conditional block
directly in _BUILD_CMDS and _INSTALL_CMDS.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
host-python-flit-core is the only package that overrides
_BASE_INSTALL_CMD. Since we're going to remove that variable in a
follow-up patch, we no longer will be able to do that.
Since host-python-flit-core is really a special case, it makes sense to
define HOST_PYTHON_FLIT_CORE_INSTALL_CMDS in its entirety.
While we're at it, also instantiate
HOST_PKG_PYTHON_PEP517_BOOTSTRAP_INSTALL_OPTS directly there. This
variable is not used anywhere else, and it's a bit confusing to have it
in pkg-python.mk - it looks like a mistake.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The _BASE_BUILD_CMD variable is set based on the setup type, and only
based on the setup type. Because of this, we have a large conditional
tree in inner-python-package which makes things hard to read.
Rather than conditions, it's also possible to use indirect variables.
Concretely, we can define PKG_PYTHON_DISTUTILS_BUILD_CMD etc., and use
$(PKG_PYTHON_$($(PKG)_SETUP_TYPE)_BUILD_CMD) instead of
$($(PKG)_BASE_BUILD_CMD) to dispatch to the right _BUILD_CMD variable.
Once we do the same for all other variables that are set in the
condition tree, we'll be able to remove the condition tree entirely.
setuptools-rust, flit and maturin didn't have their own definition of
_BUILD_CMD but were under the setuptools resp. pep517 condition. For
these, we have to define new variables that copy the value from
PKG_PYTHON_SETUPTOOLS_BUILD_CMD resp. PKG_PYTHON_PEP517_BUILD_CMD.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The _BASE_ENV variable is set based on the setup type, and only based on
the setup type. Because of this, we have a large conditional tree in
inner-python-package which makes things hard to read.
Rather than conditions, it's also possible to use indirect variables.
Concretely, we can use $(PKG_PYTHON_$($(PKG)_SETUP_TYPE)_ENV) instead
of $($(PKG)_BASE_ENV) to dispatch to the right ENV variable.
Once we do the same for all other variables that are set in the
condition tree, we'll be able to remove the condition tree entirely.
Because $($(PKG)_SETUP_TYPE) is lowercase (e.g. 'setuptools' or
'pep517'), while the existing _ENV variables have uppercase names (e.g.
PKG_PYTHON_SETUPTOOLS_ENV), we need to convert the setup type to
uppercase. Introduce the variable $(PKG)_SETUP_TYPE_UPPER for this.
flit was reusing the _BASE_ENV definition from pep517, and flit-bootstrap
also didn't have its own _ENV definition yet, so those have to be added.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Only define the _CMDS variables that are relevant for the target resp.
host variant. Duplicate the _BUILD_CMDS. This will allow us to
differentiate part of the _BUILD_CMDS definition in a follow-up patch.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This variable can just as well be merged into _BASE_BUILD_CMD. This is
how it's done for the install opts. And anyway it's only used by
distutils and nowhere else.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is a leftover from python 2/3. Since the interpreter is now always
python3, we can simply call it like that - like is done in all the other
places where python is called.
While we're at it, call python3 explicitly rather than relying on the
symlink.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
These packages don't have a setup.py so we instead need to parse their
pyproject.toml file.
It is possible that such a package does not define a project_urls config
item, so ensure we do not choke on it (None.get() would raise).
Note that this currently doesn't handle flit package dependency
resolution.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[yann.morin.1998@free.fr:
- add sentence about the project_urls rewrite
- fix flake8 errors
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- bumped package version to 6.20
- as 6.20 prebuilt version is not available on same download site but
source code is released at https://github.com/memtest86plus/memtest86plus/releases
so updated mk file to download source from git release
- prebuilt binary not found in 6.20 package and also README.md
does not mention any toolchain limitation for compilation
so added source build command depending on 32-bit or 64-bit x86 target.
- corrected License file name
- installed memtest binaries to image folder like other bootable
images(grub , kernel) are copied.
- updated config help as per package README.md
Signed-off-by: Kalpesh Panchal <kalpesh.panchal2@collins.com>
Signed-off-by: Abhishek Anand <abhishek.anand@collins.com>
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
[yann.morin.1998@free.fr:
- fix check-package errors
- fix hash file
- better install commands
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Peter Korsgaard