Update for 2023.08.2

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
package/libhtp: bump to version 0.5.45
2023-10-15 23:07:16 +02:00 · 2023-10-15 22:46:02 +02:00 · 2023-10-15 20:32:32 +02:00 · 2023-10-15 20:26:13 +02:00 · 2023-10-15 20:25:28 +02:00 · 2023-10-15 20:24:35 +02:00
2072 changed files with 16134 additions and 29527 deletions
@@ -99,6 +99,7 @@ board/technologic/ts4900/post-image.sh Shellcheck
 board/toradex/apalis-imx6/post-image.sh Shellcheck
 board/udoo/common/post-build.sh Shellcheck
 board/udoo/mx6qdl/patches/linux/0000-udoo-disable-usbh1.patch Upstream
+board/zynqmp/kria/patches/uboot/v1-0001-makefile-add-multi_dtb_fit-dep.patch ApplyOrder Upstream
 boot/afboot-stm32/0003-Makefile-disable-stack-protector.patch Upstream
 boot/at91bootstrap/0001-eabi-fix.patch Upstream
 boot/at91bootstrap/0002-gcc-4.6.x-ldscript-fix.patch Upstream
@@ -124,6 +125,8 @@ boot/syslinux/0017-Replace-builtin-strlen-that-appears-to-get-optimized.patch Up
 linux/5.10.162-cip24-rt10/0001-arch-microblaze-mm-init.c-fix-build.patch Upstream
 package/18xx-ti-utils/0001-plt.h-fix-build-with-gcc-10.patch Upstream
 package/4th/0001-avoid-regen-during-install.patch Upstream
+package/ace/0001-ACE-ace-SSL-SSL_Asynch_BIO.cpp-fix-build-with-libres.patch Upstream
+package/ace/0002-ACE-ace-SSL-SSL_Asynch_BIO.cpp-fix-build-with-libres.patch Upstream
 package/acl/0001-Build-with-old-GCC-versions.patch Upstream
 package/acpid/0001-dont-use-isfdtype.patch Upstream
 package/alchemy/0001-toolchains-remove-hash-style-management.patch Upstream
@@ -217,7 +220,10 @@ package/botan/0002-src-build-data-arch-superh.txt-add-sh4-eb-aeb.patch Upstream
 package/brickd/S70brickd Indent Shellcheck Variables
 package/bridge-utils/0001-fix-build-on-musl.patch Upstream
 package/brltty/0001-Fix-linking-error-on-mips64el.patch Upstream
+package/brltty/0002-shell-prologue-runProgramTerminationCommands-used-a-.patch Upstream
 package/brltty/S10brltty Indent Shellcheck Variables
+package/brotli/0001-CMake-Allow-using-BUILD_SHARED_LIBS-to-choose-static.patch Upstream
+package/brotli/0002-Revert-Add-runtime-linker-path-to-pkg-config-files.patch Upstream
 package/bsdiff/0001-Add-missing-header-for-u_char.patch Upstream
 package/bustle/0001-Makefile-fix-pcap-config-call.patch Upstream
 package/busybox/0001-networking-libiproute-use-linux-if_packet.h-instead-.patch Upstream
@@ -235,6 +241,7 @@ package/c-icap/0001-Required-fixes-to-compile-and-run-under-cygwin.patch Upstrea
 package/c-icap/S96cicap Indent Shellcheck Variables
 package/ca-certificates/0001-mozilla-certdata2pem.py-make-cryptography-module-opt.patch Upstream
 package/cache-calibrator/0001-Fix-conflicting-round-function.patch Upstream
+package/cage/0001-Upgrade-to-wlroots-0.15.patch Upstream
 package/cairo/0001-fix-nofork-build.patch Upstream
 package/cairo/0002-ft-Use-FT_Done_MM_Var-instead-of-free-when-available-in-cairo_ft_apply_variation.patch Upstream
 package/cairo/0003-_arc_max_angle_for_tolerance_normalized-fix-infinite.patch Upstream
@@ -278,6 +285,10 @@ package/curlftpfs/0004-fix-musl-build-off-t.patch Upstream
 package/cutelyst/0001-server-CMakeLists.txt-don-t-override-CMAKE_EXE_LINKE.patch Upstream
 package/cwiid/0001-wmdemo-fix-linking-by-adding-the-missing-lbluetooth-.patch Upstream
 package/cwiid/0002-configure-make-wmgui-build-optional.patch Upstream
+package/dahdi-linux/0001-drivers-dahdi-Kbuild-fix-HOTPLUG_FIRMWARE-definition.patch Upstream
+package/dahdi-linux/0002-fix-build-with-32-bits-kernel.patch Upstream
+package/dahdi-linux/0003-Fixed-compilation-issues-on-linux-kernel-5-18-0.patch Upstream
+package/dahdi-linux/0004-next-fix-kernel-6-1-build.patch Upstream
 package/dahdi-tools/0001-no-build-docs.patch Upstream
 package/dahdi-tools/0002-no-perl-manpages.patch Upstream
 package/dante/0001-fix-sparc-compile.patch Upstream
@@ -370,6 +381,12 @@ package/ejabberd/0002-fix-ejabberdctl.patch Upstream
 package/ejabberd/0003-correct-includes.patch Upstream
 package/ejabberd/S50ejabberd Indent Shellcheck Variables
 package/ejabberd/check-erlang-lib Shellcheck
+package/elf2flt/0001-elf2flt-handle-binutils-2.34.patch Upstream
+package/elf2flt/0002-elf2flt.ld-reinstate-32-byte-alignment-for-.data-sec.patch Upstream
+package/elf2flt/0003-elf2flt-add-riscv-64-bits-support.patch Upstream
+package/elf2flt/0004-elf2flt-create-a-common-helper-function.patch Upstream
+package/elf2flt/0005-elf2flt-fix-fatal-error-regression-on-m68k-xtensa-ri.patch Upstream
+package/elf2flt/0006-xtensa-fix-text-relocations.patch Upstream
 package/elftosb/0001-fixes-includes.patch Upstream
 package/elftosb/0002-force-cxx-compiler.patch Upstream
 package/elfutils/0001-Add-a-enable-disable-progs-configure-option.patch Upstream
@@ -390,6 +407,10 @@ package/exim/0002-Don-t-make-backup-copies-of-installed-files.patch Upstream
 package/exim/0003-Skip-version-check-and-symlink-installation.patch Upstream
 package/exim/0004-exim_lock-fix-lstat-related-build-errors.patch Upstream
 package/exim/0005-sieve-fix-build-errors.patch Upstream
+package/exim/0006-Fix-regex-n-use-after-free.-Bug-2915.patch Upstream
+package/exim/0007-Fix-non-WITH_CONTENT_SCAN-build.patch Upstream
+package/exim/0008-Fix-non-WITH_CONTENT_SCAN-build-2.patch Upstream
+package/exim/0009-Fix-non-WITH_CONTENT_SCAN-build-3.patch Upstream
 package/exim/S86exim Indent Variables
 package/expect/0001-enable-cross-compilation.patch Upstream
 package/expect/0002-allow-tcl-build-directory.patch Upstream
@@ -420,6 +441,7 @@ package/ffmpeg/0003-libavutil-Fix-mips-build.patch Upstream
 package/ffmpeg/0004-configure-add-extralibs-to-extralibs_xxx.patch Upstream
 package/ficl/0001-fix-Makefile.patch Upstream
 package/ficl/0002-Makefile.linux-pass-LDFLAGS.patch Upstream
+package/file/0001-src-file.c-fix-build-without-wide-support.patch Upstream
 package/flatbuffers/0001-include-flatbuffers-base.h-fix-build-on-musl.patch Upstream
 package/flex/0001-build-AC_USE_SYSTEM_EXTENSIONS-in-configure.ac.patch Upstream
 package/flex/0002-build-make-it-possible-to-disable-the-build-of-the-f.patch Upstream
@@ -427,6 +449,7 @@ package/flex/0003-build-make-it-possible-to-disable-the-build-of-the-d.patch Ups
 package/flite/0001-fix-alsa-static.patch Upstream
 package/fltk/0001-disable-tests.patch Upstream
 package/fluxbox/0001-fixes-bug-1138.patch Upstream
+package/freeipmi/0001-add-disable-doc.patch Upstream
 package/freeradius-client/0001-fix-for-nettle.patch Upstream
 package/freerdp/0001-Fix-variable-declaration-in-loop.patch Upstream
 package/freerdp/0002-Fixed-variable-declaration-in-loop.patch Upstream
@@ -460,6 +483,15 @@ package/gcc/arc-2020.09-release/0002-libsanitizer-Remove-cyclades-from-libsaniti
 package/gcc/arc-2020.09-release/0100-uclibc-conf.patch Upstream
 package/gcr/0001-meson-Fix-unknown-kw-argument-in-gnome.generate_gir.patch Upstream
 package/gdal/0001-fix-uclibc-build-without-NPTL.patch Upstream
+package/gdb/10.2/0001-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch Upstream
+package/gdb/10.2/0002-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch Upstream
+package/gdb/10.2/0003-use-asm-sgidefs.h.patch Upstream
+package/gdb/10.2/0004-gdbserver-fix-build-for-m68k.patch Upstream
+package/gdb/10.2/0005-nat-fork-inferior-include-linux-ptrace.h.patch Upstream
+package/gdb/10.2/0006-Fix-getrandom-compile-for-uclibc-v1.0.35.patch Upstream
+package/gdb/10.2/0007-fix-musl-build-on-riscv.patch Upstream
+package/gdb/10.2/0008-gdbserver-Makefile.in-fix-NLS-build.patch Upstream
+package/gdb/10.2/0009-gdb-Fix-native-build-on-xtensa.patch Upstream
 package/gdb/11.2/0001-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch Upstream
 package/gdb/11.2/0002-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch Upstream
 package/gdb/11.2/0003-use-asm-sgidefs.h.patch Upstream
@@ -478,20 +510,13 @@ package/gdb/12.1/0006-Fix-getrandom-compile-for-uclibc-v1.0.35.patch Upstream
 package/gdb/12.1/0007-fix-musl-build-on-riscv.patch Upstream
 package/gdb/12.1/0008-gdbserver-Makefile.in-fix-NLS-build.patch Upstream
 package/gdb/12.1/0009-gdb-Fix-native-build-on-xtensa.patch Upstream
-package/gdb/13.2/0001-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch Upstream
-package/gdb/13.2/0002-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch Upstream
-package/gdb/13.2/0003-use-asm-sgidefs.h.patch Upstream
-package/gdb/13.2/0004-gdbserver-fix-build-for-m68k.patch Upstream
-package/gdb/13.2/0005-nat-fork-inferior-include-linux-ptrace.h.patch Upstream
-package/gdb/13.2/0006-Fix-getrandom-compile-for-uclibc-v1.0.35.patch Upstream
-package/gdb/13.2/0007-fix-musl-build-on-riscv.patch Upstream
-package/gdb/13.2/0008-gdbserver-Makefile.in-fix-NLS-build.patch Upstream
-package/gdb/13.2/0009-gdb-Fix-native-build-on-xtensa.patch Upstream
 package/gengetopt/0001-configure.ac-add-disable-doc-option.patch Upstream
 package/genpart/0001-fix-return-code.patch Upstream
 package/genromfs/0001-build-system.patch Sob Upstream
 package/gensio/0001-Fix-missing-EVP_PKEY_ED25519-build-error-on-libressl.patch Upstream
 package/gerbera/S99gerbera Indent
+package/gettext-gnu/0001-error_print_progname.patch Upstream
+package/gettext-gnu/0002-restore-the-ability-to-buld-gettext-tools-seperately-part1.patch Upstream
 package/giblib/0001-fix-imlib2-detection.patch Upstream
 package/giflib/0001-Makefile-add-targets-to-manage-static-building.patch Upstream
 package/git-crypt/0001-fix-build-with-libressl-3.5.0.patch Upstream
@@ -499,6 +524,7 @@ package/gli/0001-Optional-building-tests.patch Upstream
 package/glog/0001-added-emscripten-support.patch Upstream
 package/glorytun/0001-Add-support-for-Apple-silicon.patch Upstream
 package/glorytun/0002-aegis256.c-fix-aarch64-build-with-uclibc.patch Upstream
+package/gmp/0001-mpz-inp_raw.c-Avoid-bit-size-overflows.patch Upstream
 package/gnu-efi/0001-Make.defaults-don-t-override-ARCH-when-cross-compili.patch Upstream
 package/gnupg/0001-build-Always-use-EXTERN_UNLESS_MAIN_MODULE-pattern.patch Upstream
 package/gnuplot/0001-configure-add-without-demo-option.patch Upstream
@@ -507,6 +533,7 @@ package/gob2/0001-dont-include-from-prefix.patch Upstream
 package/gobject-introspection/0001-disable-tests.patch Upstream
 package/gobject-introspection/0002-Add-rpath-links-to-ccompiler.patch Upstream
 package/gobject-introspection/0003-giscanner-ignore-error-return-codes-from-ldd-wrapper.patch Upstream
+package/google-breakpad/gen-syms.sh Shellcheck
 package/gpm/0001-Added-musl-support-to-libgpm-and-the-daemon.patch Upstream
 package/gpm/0002-Install-unversioned-solibrary.patch Upstream
 package/gpm/0003-src-Makefile.in-Really-install-unversioned-solibrary.patch Upstream
@@ -520,6 +547,7 @@ package/graphite2/0001-don-t-install-a-libtool-file-with-static-library.patch Up
 package/grpc/0002-wrap_memcpy.cc-add-GPR_DISABLE_WRAPPED_MEMCPY.patch Upstream
 package/grpc/0003-host-grpc-only-cpp-plugin.patch Upstream
 package/grpc/0004-disable-unconditionally-downloading-api-repos.patch Upstream
+package/gsl/0001-configure.ac-fix-build-on-powerpc.patch Upstream
 package/gstreamer1/gstd/0001-Don-t-require-gstd-check-user-xenv.sh-for-systemd-se.patch Upstream
 package/guile/0001-calculate-csqrt_manually.patch Upstream
 package/guile/0002-Makefile.am-fix-build-without-makeinfo.patch Upstream
@@ -562,7 +590,10 @@ package/ifupdown-scripts/nfs_check Shellcheck
 package/ifupdown/0001-archcommon-define-GNU-only-FNM_EXTMATCH-to-zero-on-n.patch Upstream
 package/ifupdown/0001-dont-use-dpkg-architecture.patch Upstream
 package/igd2-for-linux/S99upnpd Indent Shellcheck Variables
-package/imx-mkimage/0001-Add-unused-fake-version.patch Upstream
+package/imx-mkimage/0001-Add-support-for-overriding-BL32-and-BL33-not-only-BL.patch Upstream
+package/imx-mkimage/0002-Add-LDFLAGS-to-link-step.patch Upstream
+package/imx-mkimage/0003-Add-unused-fake-version.patch Upstream
+package/imx-mkimage/0004-Add-support-for-overriding-BL31-BL32-and-BL33.patch Upstream
 package/inadyn/S70inadyn Indent NotExecutable
 package/initscripts/init.d/rcK ConsecutiveEmptyLines EmptyLastLine Shellcheck
 package/initscripts/init.d/rcS ConsecutiveEmptyLines EmptyLastLine Shellcheck
@@ -570,6 +601,7 @@ package/input-event-daemon/S99input-event-daemon ConsecutiveEmptyLines Indent Va
 package/intel-gmmlib/0001-Drop-hardening-related-flags.patch Upstream
 package/intel-mediasdk/0001-Don-t-force-fstack-protector.patch Upstream
 package/intltool/0001-perl-5.26-compatibility.patch Upstream
+package/iodine/0001-disable-systemd-and-selinux.patch Upstream
 package/iotop/0001-Fix-build-error-with-Python-3.patch Upstream
 package/iozone/0001-Add-new-targets-for-iozone.patch Upstream
 package/iperf/0001-fix-single-threaded-compile-breakage.patch Upstream
@@ -593,6 +625,9 @@ package/janus-gateway/0001-disable-ssp.patch Upstream
 package/janus-gateway/0002-Add-test-for-Wunused-but-set-variable.patch Upstream
 package/jose/0001-lib-hsh.c-rename-hsh-local-variable.patch Upstream
 package/jose/0002-man-add-option-to-skip-building-man-pages.patch Upstream
+package/keepalived/0001-vrrp-nft-didn-t-support-meta-l4proro-until-Linux-3-14.patch Upstream
+package/keepalived/0002-ipvs-nft-didn-t-support-meta-l4proro-until-Linux-3-14.patch Upstream
+package/keepalived/0003-fix-build-with-libressl.patch Upstream
 package/kexec-lite/0001-clean-restart.patch Upstream
 package/keyutils/0001-fix-install-rule.patch Upstream
 package/keyutils/0002-cifs.patch Sob Upstream
@@ -613,6 +648,7 @@ package/leveldb/0003-CMakeLists.txt-check-for-atomic-library.patch Upstream
 package/lftp/0001-Fix-build-with-LibreSSL-following-commit-537f37898.patch Upstream
 package/lftp/0002-src-lftp_ssl.c-fix-build-with-libressl-2.7.0.patch Upstream
 package/libabseil-cpp/0001-force-position-independent-code.patch Upstream
+package/libarchive/0001-autotools-do-not-add-iconv-for-Requires.private.patch Upstream
 package/libargon2/0001-libargon2-dont-fail-on-existing-symlink.patch Upstream
 package/libart/0001-art-config-cross.patch Sob Upstream
 package/libatasmart/0001-strpool-cross-flags.patch Upstream
@@ -629,9 +665,11 @@ package/libcorrect/0002-CMakeLists.txt-conditionally-use-fsanitize-address.patch
 package/libcuefile/0001-fix-static-link.patch Upstream
 package/libdaemon/0001-testd-use-unistd-h-instead-of-sys-unistd-h.patch Upstream
 package/libdnet/0001-python-makefile.patch Upstream
+package/libdnet/0002-Correct-path-to-string-h-from-bsd.patch Upstream
 package/libdrm/0001-tests-meson.build-disable-nouveau-tests-for-static-b.patch Upstream
 package/libdvbcsa/0001-altivec-powerpc64.patch Upstream
 package/libeXosip2/0001-src-eXtl_dtls.c-fix-build-with-libressl-3.4.1.patch Upstream
+package/libebml/0001-include-appropriate-header-files-for-std-numeric_limits.patch Upstream
 package/libedit/0001-check-bsd-functions-in-libbsd.patch Upstream
 package/libevent/0001-Don-t-define-BIO_get_init-for-LibreSSL-3-5.patch Upstream
 package/libfcgi/0001-link-against-math.patch Upstream
@@ -652,8 +690,10 @@ package/libftdi1/0003-CMakeLists.txt-fix-static-build-with-libusb-and-lato.patch
 package/libfuse/0001-fix-aarch64-build.patch Upstream
 package/libfuse/0002-util-ulockmgr_server-c-conditionally-define-closefrom-fix-glibc-2-34.patch Upstream
 package/libgcrypt/0001-configure.ac-add-an-option-to-disable-tests.patch Upstream
+package/libgdiplus/0001-Build-unit-tests-only-when-enable-unit-tests-is-pass.patch Upstream
 package/libglfw/0001-Wayland-Remove-extra-cmake-modules-dependency.patch Upstream
 package/libglfw/0002-src-CMakeLists.txt-allow-override-of-wayland-pkgdata.patch Upstream
+package/libgpgme/0001-Fix-build-without-threads.patch Upstream
 package/libgpiod/0001-build-add-a-configure-switch-for-building-examples.patch Upstream
 package/libgsm/0001-misc-fixes-from-archlinux.patch Upstream
 package/libgtk2/0001-reduce-dependencies.patch Upstream
@@ -664,6 +704,7 @@ package/libhid/0002-no-newline-in-ldflags.patch Upstream
 package/libhid/0003-uclinux.patch Upstream
 package/libical/0001-no-tests.patch Upstream
 package/libical/0002-icaltypes-c-icalreqstattype_from_string-copy-the-reqstattype.patch Upstream
+package/libiio/0001-iiod-serial.c-fix-sparc-build.patch Upstream
 package/libiio/S99iiod Shellcheck Variables
 package/libiqrf/0001-cmake-handle-static-library-and-find-required-thread.patch Upstream
 package/libiqrf/0002-use-only-c-language.patch Upstream
@@ -693,8 +734,10 @@ package/libmpeg2/0001-altivec.patch Upstream
 package/libmpeg2/0002-armv4l.patch Upstream
 package/libmpeg2/0003-fix-arm-detection.patch Upstream
 package/libmpeg2/0004-fix-sparc.patch Upstream
+package/libnet/0001-Use-standard-int64_t-instead-of-__int64_t-for-mingw-cross-build.patch Upstream
 package/libnetfilter_conntrack/0001-conntrack-fix-build-with-kernel-5-15-and-musl.patch Upstream
 package/libnfc/0001-autotools-make-example-build-optional.patch Upstream
+package/libnfs/0001-Fix-include-sys-time.h.patch Upstream
 package/libnids/0001-libpcap-use-pkg-config.patch Upstream
 package/libnl/0001-Add-musl-workaround-to-the-libc-compat.h-copy.patch Upstream
 package/libnss/0001-Bug-1801182-Allow-overriding-OS_ARCH-OS_TEST-and-OS_.patch Upstream
@@ -710,12 +753,14 @@ package/liboping/0003-Fix-compile-break-with-GCC-7-buffer-overflow-with-snprintf
 package/liboping/0004-Fix-compile-error-on-GCC-7.patch Upstream
 package/liboping/0005-src-oping.c-always-use-s-style-format-for-printf-sty.patch Upstream
 package/libp11/0001-src-p11_attr.c-fix-build-with-gcc-4.8.patch Upstream
+package/libpam-tacplus/0001-Add-an-option-to-disable-Werror.patch Upstream
 package/libplatform/0001-cmake-require-c-11-as-the-minimum-standard.patch Upstream
 package/libpng/0001-Disable-pngfix-and-png-fix-itxt.patch Upstream
 package/libpthsem/0001-fix-build-on-linux-3.x-host.patch Upstream
 package/libressl/0001-always-expose-SSL_OP_NO_TLSv1_3.patch Upstream
 package/libroxml/0001-src-roxml_mem.h-add-missing-extern.patch Upstream
 package/librsvg/0001-gdk-pixbuf-loader-Makefile.am-set-GDK_PIXBUF_MODULED.patch Upstream
+package/librtas/0001-configure.ac-remove-LOCAL_CHECK_FLAGS.patch Upstream
 package/librtlsdr/0001-Makefile.am-respect-DESTDIR-with-install-udev-rules.patch Upstream
 package/libselinux/0001-fix-musl-build.patch Upstream
 package/libselinux/0002-Do-not-use-PYCEXT-and-rely-on-the-installed-file-nam.patch Upstream
@@ -732,11 +777,13 @@ package/libsigrok/0001-Support-glibmm-2.68.patch Upstream
 package/libsigrokdecode/0001-configure-ac-Add-support-for-Python-3-9.patch Upstream
 package/libsigrokdecode/0002-configure-Add-python-3-10-support.patch Upstream
 package/libsigrokdecode/0003-configure-ac-Use-python3-embed-pc-as-a-fallback.patch Upstream
+package/libsolv/0001-Fix-build-without-C.patch Upstream
 package/libsoup/0001-meson.build-set-c_std-to-gnu99.patch Upstream
 package/libsoxr/0001-Add-Libs.private-for-static-linking.patch Upstream
 package/libspatialindex/0001-allow-building-static-libs.patch Upstream
 package/libspatialindex/0002-CMakeLists.txt-fix-CMAKE_BUILD_TYPE.patch Upstream
 package/libsquish/0001-Makefile-add-f-option-for-ln-to-remove-existing-dest.patch Upstream
+package/libsrtp/0001-Remove-compatibility-code-for-legacy-OpenSSL-to-fix-LibreSSL-build.patch Upstream
 package/libsvg/0001-fix-expat-static-declaration.patch Upstream
 package/libsvg/0002-Fix-undefined-symbol-png_set_gray_1_2_4_to_8.patch Upstream
 package/libsvgtiny/0001-disable-debug-printfs.patch Upstream
@@ -744,6 +791,9 @@ package/libsvgtiny/0002-Remove-Werror.patch Upstream
 package/libsvgtiny/0003-Hopefully-silence-warnings-about-inlines-and-non-inlines-calling-one.patch Upstream
 package/libsvgtiny/0004-Build-Include-gperf-generated-code-directly.patch Upstream
 package/libtalloc/0001-buildtools-wafsamba-add-disable-stack-protector-opti.patch Upstream
+package/libteam/0001-revert-disregard-current-state.patch Upstream
+package/libteam/0002-fix-build-on-openwrt-musl-libc.patch Upstream
+package/libteam/0003-increase-wait-time-for-daemon-kill.patch Upstream
 package/libtelnet/0001-fix-compilation-without-zlib.patch Upstream
 package/libtheora/0001-link-libtheoradec.patch Upstream
 package/libtheora/0002-fix-autoreconf.patch Upstream
@@ -754,6 +804,9 @@ package/libubootenv/0001-src-CMakeLists.txt-do-not-force-the-build-of-a-share.pa
 package/libuhttpd/0001-add-compatibility-for-wolfssl-5-0.patch Upstream
 package/libuio/0001-configure.ac-set-automake-strictness-to-foreign.patch Upstream
 package/liburcu/0001-Only-blacklist-ARM-gcc-4.8.0-and-4.8.1.patch Upstream
+package/liburcu/0002-fix-don-t-use-C-thread_local-on-MacOs.patch Upstream
+package/liburcu/0003-Always-use-__thread-for-Thread-local-storage-except-on-MSVC.patch Upstream
+package/libusb-compat/0001-fix-a-build-issue-on-linux.patch Upstream
 package/libusbgx/0001-Add-include-of-sys-sysmacro.h.patch Upstream
 package/libuwsc/0001-CMakeLists.txt-add-BUILD_EXAMPLE.patch Upstream
 package/libuwsc/0002-fix-bad-indentation.patch Upstream
@@ -799,6 +852,7 @@ package/lshw/0001-solve-Compile-error-when-g-version-is-less-than-5.patch Upstre
 package/ltrace/0001-arm-plt.patch Upstream
 package/ltrace/0002-sparc-add-missing-library.h-include.patch Upstream
 package/ltrace/0003-configure.ac-fix-autoreconf-with-autoconf-2.70.patch Upstream
+package/ltris/0001-fix-build-with-gcc-4.8.patch Upstream
 package/lttng-babeltrace/0001-tests-lib-Makefile.am-remove-unneeded-static-flag.patch Upstream
 package/lttng-babeltrace/0002-configure.ac-fix-popt-static-build.patch Upstream
 package/lttng-libust/0001-configure.ac-add-disable-tests.patch Upstream
@@ -848,6 +902,9 @@ package/matchbox/0001-defaulttheme.patch Upstream
 package/matchbox/0002-src-Fix-build-with-gcc-10.patch Upstream
 package/mediastreamer/0001-src-videofilters-nowebcam.c-fix-build-without-ffmpeg.patch Upstream
 package/mediastreamer/0002-Use-AV_INPUT_BUFFER_PADDING_SIZE-to-determine-paddin.patch Upstream
+package/memcached/0001-logger.c-initialize-rport.patch Upstream
+package/memcached/0002-check-for-sys-auxv.h.patch Upstream
+package/memcached/0003-configure.ac-add-disable-werror.patch Upstream
 package/memstat/0001-PATH_MAX.patch Upstream
 package/mender-connect/S43mender-connect Shellcheck
 package/menu-cache/0001-Support-gcc10-compilation.patch Upstream
@@ -920,6 +977,8 @@ package/netsurf/0002-do-not-cross-compile-nsgenbind.patch Upstream
 package/netsurf/0003-fix-compilation-without-curl.patch Upstream
 package/netsurf/0004-framebuffer-Fix-internal-font-generated-source-for-GCC-10.patch Upstream
 package/nettle/0001-disable-testsuite-examples.patch Upstream
+package/network-manager/0001-build-meson-add-option-to-set-the-mobile-broadband-p.patch Upstream
+package/network-manager/0002-meson.build-fix-build-failure-with-Dmodem_manager-fa.patch Upstream
 package/network-manager/S45network-manager ConsecutiveEmptyLines EmptyLastLine Shellcheck Variables
 package/nfs-utils/S60nfs ConsecutiveEmptyLines Shellcheck Variables
 package/nginx-modsecurity/0001-config-use-pkg-config.patch Upstream
@@ -939,10 +998,10 @@ package/ngrep/0002-Check-for-libnet_init-in-configure-in.patch Upstream
 package/ngrep/0003-fix-disable-tcpkill.patch Upstream
 package/nilfs-utils/0001-nilfs_cleanerd-link-dynamically.patch Upstream
 package/nmap/0001-libdnet-wrapper-configure.patch Upstream
-package/nodejs/nodejs-src/0001-add-qemu-wrapper-support.patch Upstream
-package/nodejs/nodejs-src/0002-check-if-uclibc-has-backtrace-support.patch Upstream
-package/nodejs/nodejs-src/0003-include-obj-name-in-shared-intermediate.patch Upstream
-package/nodejs/nodejs-src/0004-lib-internal-modules-cjs-loader.js-adjust-default-pa.patch Upstream
+package/nodejs/0001-add-qemu-wrapper-support.patch Upstream
+package/nodejs/0002-check-if-uclibc-has-backtrace-support.patch Upstream
+package/nodejs/0003-include-obj-name-in-shared-intermediate.patch Upstream
+package/nodejs/0004-lib-internal-modules-cjs-loader.js-adjust-default-pa.patch Upstream
 package/nodm/S90nodm Indent Shellcheck Variables
 package/norm/0001-protolib-drop-linux-version-check.patch Upstream
 package/norm/0002-Use-print-as-function-call-for-Python3-compatibility.patch Upstream
@@ -954,6 +1013,7 @@ package/ntp/S49ntp.in Variables
 package/ntpsec/0001-wscript-remove-checks-for-bsd-string.h-fixes-host-co.patch Upstream
 package/ntpsec/0002-wscript-fix-build-without-stack-protector.patch Upstream
 package/numactl/0001-link-with-latomic-if-needed-again.patch Upstream
+package/nut/0001-clients-upsclient-h-ensure-time_t-is-defined.patch Upstream
 package/nuttcp/0001-susv3-legacy.patch Upstream
 package/nvidia-driver/0001-use-LDFLAGS.patch Upstream
 package/octave/0001-Fix-BLAS-library-integer-size-detection.patch Upstream
@@ -980,12 +1040,14 @@ package/olsr/0005-lib-pud-src-gpsdclient.c-drop-handling-of-gpsdata-fi.patch Ups
 package/olsr/0006-build-patch-for-gpsd-3-25.patch Upstream
 package/olsr/S50olsr Indent Shellcheck Variables
 package/omxplayer/0001-Update-Makefile-to-be-compatible-with-buildroot.patch Upstream
+package/open-iscsi/0001-SHA3-is-not-supported-by-libressl.patch Upstream
 package/open-plc-utils/0001-Remove-OWNER-and-GROUPS-parameters-to-install.patch Upstream
 package/open2300/0001-fix-makefile.patch Upstream
-package/openjdk/17.0.9+9/0001-Add-ARCv2-ISA-processors-support-to-Zero.patch Upstream
-package/openjdk/21.0.1+12/0001-Add-ARCv2-ISA-processors-support-to-Zero.patch Upstream
-package/openldap/0001-fix-bignum.patch Upstream
-package/openldap/0002-disable-docs.patch Upstream
+package/openjdk/17.0.8+7/0001-Add-ARCv2-ISA-processors-support-to-Zero.patch Upstream
+package/openldap/0001-fix_cross_strip.patch Upstream
+package/openldap/0002-fix-bignum.patch Upstream
+package/openldap/0003-disable-docs.patch Upstream
+package/openldap/0004-revert-ITS-3977-fix-libtool-static-behavior-to-match.patch Upstream
 package/openntpd/S49ntp Shellcheck Variables
 package/openocd/0001-configure-enable-build-on-uclinux.patch Upstream
 package/openpgm/0001-Rename-openpgm-5.2.pc.in.patch Upstream
@@ -1049,7 +1111,10 @@ package/pdmenu/0002-Makefile-autoconf-makeinfo.in-support-build-install-.patch U
 package/perl-net-ssleay/0001-fix-build-system.patch Upstream
 package/perl-sys-cpu/0001-remove-extraneous-include.patch Upstream
 package/perl-xml-libxml/0001-Makefile-PL.patch Upstream
+package/php-amqp/0001-add-build-support-for-php-8.patch Upstream
+package/php-amqp/0002-more-work-for-php-8.patch Upstream
 package/php-geoip/0001-add-build-support-for-php8.patch Upstream
+package/php-gnupg/0001-Remove-inlining-_phpc_res_close.patch Upstream
 package/php-lua/0001-ZEND_ACC_ALLOW_STATIC-ZEND_ACC_STATIC-for-static-met.patch Upstream
 package/php-lua/0002-php8-explicitly-declare-arginfo.patch Upstream
 package/php-zmq/0001-updates-for-php7.4-and-php8.0.patch Upstream
@@ -1077,6 +1142,9 @@ package/poke/0002-lib-getrandom.c-fix-build-with-uclibc-1.0.35.patch Upstream
 package/policycoreutils/0001-Add-DESTDIR-to-all-paths-that-use-an-absolute-path.patch Upstream
 package/policycoreutils/0002-Add-PREFIX-to-host-paths.patch Upstream
 package/postgresql/S50postgresql Variables
+package/powertop/0001-dont-force-stack-smashing-protection.patch Upstream
+package/pppd/0001-pppd-Fix-compilation-with-older-glibc-or-kernel-headers.patch Upstream
+package/pppd/0002-pppd-eap-tls.c-fix-build-with-libressl.patch Upstream
 package/pptp-linux/0001-susv3-legacy.patch Upstream
 package/pptp-linux/0002-fix-parallel-build.patch Upstream
 package/prboom/0001-libpng-1.4.patch Upstream
@@ -1111,6 +1179,8 @@ package/python-crossbar/0001-Avoid-intentional-syntax-error.patch Upstream
 package/python-crossbar/0002-requirements-min.txt-drop-indirect-dependencies.patch Upstream
 package/python-crossbar/0003-crossbar-webservice-wap-use-markupsafe-instead-of-we.patch Upstream
 package/python-daphne/0001-remove-pytest-runner-requirement.patch Upstream
+package/python-dnspython/0001-Remove-spurious-wheel-build-dependency.patch Upstream
+package/python-m2crypto/0001-Mitigate-the-Bleichenbacher-timing-attacks-in-the-RSA-decryption-API-CVE-2020-25657.patch Upstream
 package/python-pybind/0001-pybind11-commands.py-support-STAGING_DIR.patch Upstream
 package/python-pylibftdi/0001-do-not-use-find-library.patch Upstream
 package/python-pyqt5/0001-configure-skip-qtdetail.patch Upstream
@@ -1187,6 +1257,7 @@ package/quagga/0002-lib-prefix.h-fix-build-with-gcc-10.patch Upstream
 package/quagga/0003-Fix-build-with-gcc-10.patch Upstream
 package/quotatool/0001-fix-missing-__P-definition-for-musl-compile.patch Upstream
 package/racehound/0001-Fix-module-install-path-lib-instead-of-usr-lib-prefi.patch Upstream
+package/ranger/0001-colorscheme-check-for-compiled-python-files.patch Upstream
 package/rapidxml/0001-ensure-internal-print-operations-are-declared-before.patch Upstream
 package/raspberrypi-usbboot/0001-Makefile-allow-passing-CFLAGS-LDFLAGS.patch Upstream
 package/rdesktop/0001-8bit-colors.patch Sob Upstream
@@ -1258,6 +1329,8 @@ package/ser2net/S50ser2net Indent Shellcheck Variables
 package/setools/0001-Do-not-export-use-setools.InfoFlowAnalysis-and-setoo.patch Upstream
 package/setserial/0001-build-system-fix.patch Upstream
 package/setserial/0002-tiocghayesesp-build-fix.patch Upstream
+package/sg3_utils/0001-src-sg_dd.c-fix-musl-build.patch Upstream
+package/sg3_utils/0002-configure.ac-fix-uclibc-ng-build.patch Upstream
 package/shadowsocks-libev/0001-configure.ac-use-pkg-config-to-find-netfilter_conntr.patch Upstream
 package/shadowsocks-libev/0002-fix-maybe-uninitialized-errors.patch Upstream
 package/shadowsocks-libev/0003-lib-Makefile.am-remove-static-from-LDFLAGS.patch Upstream
@@ -1273,6 +1346,7 @@ package/smcroute/S41smcroute Indent NotExecutable Variables
 package/smstools3/0001-fix-Makefile.patch Upstream
 package/smstools3/0002-fix-build-with-gcc-10.x.patch Upstream
 package/smstools3/S50smsd Shellcheck Variables
+package/snappy/0001-Add-inline-with-SNAPPY_ATTRIBUTE_ALWAYS_INLINE.patch Upstream
 package/snmppp/0001-fix-build-without-v3.patch Upstream
 package/snort/0001-configure.in-Avoid-path-poisoning-with-libpcap.patch Upstream
 package/snort/0002-configure.in-Allow-to-override-the-INADDR_NONE-check.patch Upstream
@@ -1304,6 +1378,7 @@ package/sox/0005-configure.ac-fix-static-linking-with-sndfile.patch Upstream
 package/sp-oops-extract/0001-Make-the-Makefile-more-cross-compiler-friendly.patch Upstream
 package/sp-oops-extract/0002-stdint-cleanup.patch Upstream
 package/spandsp/0001-configure.ac-fix-AVX-SSE-and-MMX-options.patch Upstream
+package/speechd/0001-add-disable-doc.patch Upstream
 package/speex/0001-thumb2-support.patch Upstream
 package/squid/S97squid Indent Shellcheck Variables
 package/sredird/0001-termio.patch Upstream
@@ -1322,6 +1397,8 @@ package/swupdate/swupdate.sh Shellcheck
 package/sylpheed/0001-harden-link-checker-before-accepting-click.patch Upstream
 package/sysprof/0001-define-NT_GNU_BUILD_ID.patch Upstream
 package/sysrepo/S51sysrepo-plugind Indent Shellcheck
+package/system-config-printer/0001-Add-option-to-disable-xmlto-manual-generation.patch Upstream
+package/system-config-printer/0002-configure-accept-non-system-cups-config.patch Upstream
 package/sysvinit/0001-Makefile-disable-stack-protector-strong.patch Upstream
 package/tar/0001-lib-getrandom.c-fix-build-with-uclibc-1.0.35.patch Upstream
 package/targetcli-fb/S50target Shellcheck Variables
@@ -1349,6 +1426,9 @@ package/tinydtls/0001-sha2-sha2.c-fix-build-on-big-endian.patch Upstream
 package/tinymembench/0001-arm-fix-build-on-Thumb-only-architectures.patch Upstream
 package/tinyproxy/0001-prevent-junk-from-showing-up-in-error-page-in-invalid-requests.patch Upstream
 package/tinyxml/0001-In-stamp-always-advance-the-pointer-if-p-0xef.patch Upstream
+package/tor/0001-patch-src_lib_crypt_ops_crypto_dh_openssl_c.patch Upstream
+package/tor/0002-patch-src_lib_crypt_ops_crypto_rsa_openssl_c.patch Upstream
+package/tor/0003-patch-src_lib_tls_x509_openssl_c.patch Upstream
 package/tpm2-abrmd/S80tpm2-abrmd Indent Shellcheck Variables
 package/tpm2-tss/0001-Temporary-fix-for-build-without-C.patch Upstream
 package/transmission/S92transmission ConsecutiveEmptyLines Indent Shellcheck Variables
@@ -1369,12 +1449,14 @@ package/uboot-tools/0003-tools-Makefile-fix-C-LD-FLAGS-with-CROSS_BUILD_TOOLS.pa
 package/ubus/0001-Install-server-and-client-examples.patch Upstream
 package/udpcast/0001-fix-musl-build.patch Upstream
 package/uemacs/01-clear-ixon-termios-flag.patch Upstream
+package/uftrace/0001-cmds-records-replace-ADDR_NO_RANDOMIZE-by-its-value.patch Upstream
 package/uhd/0001-host-CMakeLists-add-boost-unit_test_framework-requir.patch Upstream
 package/uhttpd/0001-Remove-Werror.patch Upstream
 package/uhttpd/0002-Fix-TCP_FASTOPEN-related-compile-error.patch Upstream
 package/umtprd/0001-Fix-output_dir-make-dependency.patch Upstream
 package/unbound/S70unbound Shellcheck
 package/unifdef/0001-Makefile-fix-error-on-install.patch Upstream
+package/unixodbc/0001-DriverManager-drivermanager.h-fix-build-without-thre.patch Upstream
 package/unscd/S46unscd Indent Shellcheck Variables
 package/unzip/0001-Add-a-CMakeFile.txt-to-ease-cross-compilation.patch Upstream
 package/upmpdcli/S99upmpdcli Indent Shellcheck Variables
@@ -1400,6 +1482,9 @@ package/vboot-utils/0004-Disable-static-futility.patch Upstream
 package/vboot-utils/0005-include-sys-sysmacros.h-for-major.patch Upstream
 package/vboot-utils/0006-Update-for-openssl-1.1.patch Upstream
 package/vboot-utils/0007-Make-vboot_version-extern-in-header.patch Upstream
+package/vde2/0001-no-cxx.patch Upstream
+package/vde2/0002-fstp-Add-static-to-inline-functions.patch Upstream
+package/vde2/0003-vde_l3-Add-static-to-inline-functions.patch Upstream
 package/vdr/0001-getloadavg.patch Upstream
 package/vlc/0001-Disable-building-of-statically-linked-vlc-binary.patch Upstream
 package/vlc/0002-automake-add-subdir-objects-option.patch Upstream
@@ -1438,6 +1523,7 @@ package/wampcc/0001-Add-RISC-V-endian-detection.patch Upstream
 package/wampcc/0002-include-wampcc-platform.h-fix-build-with-musl-1.2.0.patch Upstream
 package/wampcc/0003-Broken-build-on-Windows.patch Upstream
 package/watchdogd/S01watchdogd Indent NotExecutable
+package/wavemon/0001-iw_if.h-don-t-include-linux-if.h.patch Upstream
 package/webrtc-audio-processing/0001-Proper-detection-of-cxxabi.h-and-execinfo.h.patch Upstream
 package/wget/0001-lib-getrandom.c-fix-build-with-uclibc-1.0.35.patch Upstream
 package/wilc-driver/0001-cfg80211.c-fix-missing-prandom_u32-with-Linux-6.1.0.patch Upstream
@@ -1489,6 +1575,7 @@ package/xenomai/3.0.10/0002-Add-disable-demo-testsuite-options.patch Upstream
 package/xenomai/3.0.10/0003-lib-cobalt-copperplate-Use-valid-addresses-for-pthread_setspecific.patch Upstream
 package/xfsprogs/0001-mdrestore-do-not-do-dynamic-linking-of-libtool-libra.patch Upstream
 package/xfsprogs/0002-libxfs-do-not-try-to-run-the-crc32selftest.patch Upstream
+package/xfsprogs/0003-libxfs-stop-overriding-MAP_SYNC-in-publicly-exported.patch Upstream
 package/xinetd/0001-ar.patch Upstream
 package/xinetd/0002-destdir.patch Upstream
 package/xinetd/0003-rpc-fix.patch Upstream
@@ -1496,15 +1583,22 @@ package/xinetd/0004-configure-rlim_t.patch Upstream
 package/xinetd/0005-CVE-2013-4342-xinetd-ignores-user-and-group-directiv.patch Upstream
 package/xl2tp/xl2tpd TrailingSpace
 package/xml-security-c/0001-fix-build-with-libressl-3.5.0.patch Upstream
+package/xxhash/0001-fix-man-page-installation.patch Upstream
+package/xxhash/0002-Makefile-add-dedicated-install-targets.patch Upstream
+package/xxhash/0003-do-no-longer-depend-on-assert-h-for-XXH_STATIC_ASSERT.patch Upstream
+package/xxhash/0004-Makefile-add-install_libxxhash.includes-target.patch Upstream
 package/yajl/0001-Let-the-shared-and-the-static-library-have-the-same-.patch Upstream
 package/yajl/0002-cmake-disable-shared-library-build-when-BUILD_SHARED.patch Upstream
 package/yajl/0003-Link-with-shared-libyajl-in-a-shared-build.patch Upstream
 package/yajl/0004-Link-libyajl-_s-with-libm-when-isnan-is-not-brought-.patch Upstream
 package/ympd/0001-only-c-language.patch Upstream
 package/ympd/0002-added-forward-declarations.patch Upstream
+package/ytree/0001-fix-musl.patch Upstream
 package/zabbix/0001-m4-netsnmp.m4-fix-shared-netsnmp-build.patch Upstream
 package/zabbix/0002-fix-build-with-libressl-3.5.0.patch Upstream
 package/zbar/0001-python-enum-fix-build-for-Python-3.11.patch Upstream
+package/zchunk/0001-meson-fix-argp-standalone-wrap-and-find_library.patch Upstream
+package/zchunk/0002-zck-declare-write_data-as-static.patch Upstream
 package/zic/0001-remove-dependency-check-on-version-file.patch Upstream
 package/zip/0001-configure-Remove-Check-C-compiler-type-optimization-.patch Upstream
 package/zip/0002-configure-Don-t-use-host-CPP.patch Upstream
@@ -1538,6 +1632,7 @@ support/download/go-post-process Shellcheck
 support/download/hg Shellcheck
 support/download/scp Shellcheck
 support/download/sftp Shellcheck
+support/download/svn Shellcheck
 support/download/wget Shellcheck
 support/gnuconfig/update Shellcheck
 support/libtool/buildroot-libtool-v1.5.patch ApplyOrder Sob Upstream
@@ -1551,6 +1646,7 @@ support/scripts/check-bin-arch Shellcheck
 support/scripts/check-host-rpath Shellcheck
 support/scripts/expunge-gconv-modules Shellcheck
 support/scripts/fix-configure-powerpc64.sh EmptyLastLine
+support/scripts/fix-rpath Shellcheck
 support/scripts/generate-gitlab-ci-yml Shellcheck
 support/scripts/mkmakefile ConsecutiveEmptyLines Shellcheck
 support/scripts/mkusers Shellcheck
@@ -1,37 +0,0 @@
-root = true
-
-[*]
-charset = utf-8
-end_of_line = lf
-indent_style = space
-indent_size = 4
-tab_width = 8
-trim_trailing_whitespace = true
-insert_final_newline = true
-
-[DEVELOPERS]
-indent_style = tab
-indent_size = tab
-
-[Config*.in*]
-indent_style = tab
-indent_size = tab
-
-[linux/Config.ext.in]
-indent_style = tab
-indent_size = tab
-
-[Makefile*]
-indent_style = tab
-indent_size = tab
-
-[*.mk]
-indent_style = tab
-indent_size = tab
-
-[S{0..9}{0..9}*]
-indent_style = tab
-indent_size = tab
-
-[*.adoc]
-trim_trailing_whitespace = false
@@ -1,211 +1,3 @@
-2023.11.1, released January 15th, 2024
-
-	Important / security related fixes.
-
-	Infrastructure:
-
-	- Download: Revert a permission fixup step in the tarball
-	  creation logic, which lead to a hash mismatch issue in two
-	  cargo-vendored packages, ripgrep and sentry-cli.
-
-	- Build: Pass GIT_DIR=. in the environment (through
-	  HOST_MAKE_ENV/TARGET_MAKE_ENV) to the build steps to
-	  workaround packages trying to detect if they are building in
-	  a git checkout and getting confused when building in a sub
-	  directory of a Buildroot git checkout.
-
-	Defconfigs: Rock5b: Add download hashes for U-Boot and Linux
-
-	Updated/fixed packages: apcupsd, arm-trusted-firmware, botan,
-	cjson, criu, cryptodev-linux, cups, dahdi-linux, dahdi-tools,
-	dbus, docker, dropbear, duktape, edk2, erlang, exim, faad2,
-	freeswitch, gcc, gdal, gdb, giflib, glibc, gnuplot, gnutls,
-	go, google-breakpad, gst-omx, gstd, gst1-devtools, gst1-libav,
-	gst1-plugins-bad, gst1-plugins-base, gst1-plugins-good,
-	gst1-plugins-ugly, gst1-python, gst1-rtsp-server, gst1-vaapi,
-	gstreamer1, gstreamer1-editing-services, ipcalc, jq,
-	json-for-modern-cpp, ksmbd-tools, libaio, libarchive,
-	libcamera, libcamera-apps, libcap-ng, libcgroup, libcurl,
-	libde265, libebml, libgtk3, libheif, libiec61850, libndns,
-	libostree, libraw, libsigsegv, libssh, libssh2, libuev,
-	libwebsockets, libzenoh-pico, liquid-dsp, lvm2, madplay,
-	mesa3d, micropython, minizip, mp4v2, nushell,
-	onevpl-intel-gpu, opensc, openssh, optee-client, orc, php,
-	pipewire, postgis, postgresql, proftpd, putty, python-brotli,
-	python-pysensors, python-sip, python-werkzeug, shim, squid,
-	strongswan, sway, tinyssh, tor, transmission, tree, udev,
-	uftp, valijson, wireshark, wlroots, wolfssl,
-	xserver_xorg-server, xwayland,
-
-2023.11, released December 4th, 2023
-
-	Various fixes.
-
-	Defconfigs: Toradex apalis i.mx6: Add download hashes for
-	Linux and U-Boot.
-
-	Updated/fixed packages: cog, freescale-imx, imagemagick,
-	libde265, libmemcached, libpjsip, libusb-compat,
-	libzenoh-pico, linux-tools, lttng-modules, mariadb, monit,
-	openfpgaloader, perl, putty, python-numpy, rtty, speechd,
-	wireshark, xenomai, xtables-addons, zfs
-
-2023.11-rc2, released November 29th, 2023
-
-	Fixes all over the tree.
-
-	Defconfigs: Raspberry pi: Fix bluetooth autoprobing,
-	rockpro64: Fix U-Boot build, bump rootfs size, vim3: Use
-	device tree from Linux rather than from U-Boot.
-
-	Updated/fixed packages: erlang, exfatprogs, flutter-engine,
-	flutter-sdk-bin, gcc, gsl, intel-microcode, janet,
-	kodi-pvr-hts, libgdiplus, libpam-tacplus, libxml2,
-	libzenoh-pico, memcached, motion, netsnmp, nodejs, oatpp,
-	openrc, opensc, perl, postgresql, python-msgpack, qemu,
-	refpolicy, samba4, squid, vim, vlc, xwayland, zfs
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#15856: Using BR2_CONFIG= on a different file-system...
-
-2023.11-rc1, released November 14th, 2023
-
-	Fixes all over the tree and new features.
-
-	Architecture: MIPS IV (re-)added. The mutually exclusive ABI
-	selection dropped for PowerPC.
-
-	Toolchain:
-
-	- Support for GDB 13.2, make GDB 12.x the default
-
-	- Glibc bumped to 2.38
-
-	- Bootlin external toolchains updated to 2023.08, bringing
-          support for Aarch64 BE with musl.
-
-	- Motorola 68K w/MMU support added for glibc and musl.
-
-	- License info added for GCC
-
-	Infrastructure:
-
-	- The CMake infrastructure now supports building packages with
-          ninja instead of make (based on <pkg>_CMAKE_BACKEND).
-
-	- The RPATH fixup done at the end of the build is now done in
-          parallel (according to BR2_JLEVEL).
-
-	- Packages downloaded from Subversion repos no longer
-          retrieves svn:externals unless <pkg>_SVN_EXTERNALS is set to
-          YES.
-
-	- Packages where a free-form version/site can be specified
-          (E.G. Linux, U-Boot, ..) can now have the corresponding
-          tarballs of these custom downloads checked by the download
-          infrastructure based on .hash files in the global patch
-          directory. These hashes are optional unless
-          BR2_DOWNLOAD_FORCE_CHECK_HASHES is enabled.
-
-	  A utils/add-custom-hashes helper script has been added to
-          assist in managing such hash files.
-
-	- Various improvements to utils/docker-run to handle external
-          (BR2_DL_DIR defined in environment) download directory,
-          proxy configuration, SELinux and out of tree (O=) builds.
-
-	New defconfigs: AMD Zynq ZC702, ASUS Tinker-s rk3288, ICnova
-	A20-adb4006, Khadas vim3, Libre Computer ROC-RK3399-PC,
-	Microchip PolarFire SoC Icicle Kit, NXP imxrt1050-evk, Pine64
-	pinecube, Sipeed LicheePi Nano, Synopsys ARC700 nSIM, TI
-	SK-AM62 and TI SK-AM64
-
-	New packages: ti-k3-boot-firmware, ti-k3-image-gen,
-	amlogic-boot-fip, criu, cutekeyboard, depot-tools, fft-eval,
-	firewalld, flutter-engine, flutter-gallery, flutter-pi,
-	flutter-sdk-bin, ledmon, libcanberra, libnvme, libsoup3,
-	libspdm, libucontext, libzenoh-pico,
-	microchip-hss-payload-generator, nodejs-bin, nushell,
-	nvidia-persistenced, oatpp, onevpl-intel-gpu, onevpl,
-	python-calver, python-distlib, python-jeepney,
-	python-jsonschema-specifications, python-kmod,
-	python-pysensors, python-referencing, python-segno,
-	python-tftpy, python-trove-classifiers,
-	python-types-python-dateutil, python-versioneer,
-	qoriq-fm-ucode, qt6core5compat, rauc-hawkbit-updater,
-	rust-bindgen, spirv-headers, spirv-tools, vulkan-loader,
-	vulkan-tools
-
-	Removed packages: google-material-design-icons, libtextstyle,
-	python-pyxb
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#14366: Nodejs fails with "version `GLIBC_2.34' not found"..
-	#14741: e2fsck is failing during cronjob build where fail...
-	#15628: Missing dependencies in BR2_PACKAGE_PYTHON_MAKO
-	#15733: xfsprogs outdated
-	#15772: lz4 failed to compile with gcc 10.4.0
-	#15778: strace comilation fails on Fedora39/gcc13
-	#15787: atmel_sama5d3_xplained_mmc_defconfig: Missing...
-	#15790: at91sam9x5ek_dev_defconfig: Missing...
-	#15808: connman is not supported on musl
-	#15814: C++ not supported by bootlin toolchain
-	#15820: make linux-menuconfig does not modify correct .config..
-	#15823: Installing nodejs modules with native extensions ...
-	#15826: nodejs modules with native extensions fail to install
-	#15835: Incompatibility between network-manager and libcurl 8.4
-
-2023.08.3, released November 14th, 2023
-
-	Important / security related fixes.
-
-	Per-package builds: Unbreak SDK relocation logic. Only drop
-	the hard links for the final host / target directory, fixing a
-	build time / size regression in 2023.08.2.
-
-	Packages where a free-form version/site can be specified
-	(E.G. Linux, U-Boot, ..) can now have the corresponding
-	tarballs of these custom downloads checked by the download
-	infrastructure based on .hash files in the global patch
-	directory. These hashes are optional unless
-	BR2_DOWNLOAD_FORCE_CHECK_HASHES is enabled.
-
-	A utils/add-custom-hashes helper script has been added to
-	assist in managing such hash files.
-
-	Defconfigs: Avenger96: Downgrade to TF-A v2.5 to fix boot
-	issue since 2023.08, stm32mp157a-dk1, stm32mp157c-dk2: Unbreak
-	TF-A build, stm32mp157c-odessey: Use a fixed TF-A version for
-	reproducibility
-
-	Updated/fixed packages: apache, arm-trusted-firmware, aufs,
-	aufs-util, azure-iot-sdk, casync, cjson, clamav, conmon,
-	cups-filters, dhcpcd, docker-cli, docker-engine,
-	freeradius-server, go, inadyn, ksmbd-tools, kvmtool,
-	libgdiplus, libgeos, libmemcached, libmdbx, libopenssl,
-	libosmium, libtommath, libupnp, libzlib, lightning, linux-pam,
-	lxc, mender, minizip-zlib, mpd, mxsldr, nano, nettle,
-	network-manager, nghttp2, nodejs-src, opencv4,
-	opencv4-contrib, openjdk-bin, openvpn, opusfile, paho-mqtt-c,
-	pango, perl-lwp-protocol-https, petitboot, php, pistache,
-	python-django, python-pycryptodomex, python-urllib3,
-	python-web2py, rabbitmq-c, redis, reproc,
-	riscv64-elf-toolchain, sedutil, snort3, suricata, tar, tiff,
-	tor, traceroute, vim, websocketpp, wireshark, wolfssl,
-	xdg-dbus-proxy, xen, xlib_libX11, xlib_libXpm, zabbix, zchunk
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#14741: e2fsck is failing during cronjob build where fail...
-	#15772: lz4 failed to compile with gcc 10.4.0
-	#15787: atmel_sama5d3_xplained_mmc_defconfig: Missing...
-	#15790: at91sam9x5ek_dev_defconfig: Missing...
-	#15820: make linux-menuconfig does not modify correct .config..
-	#15823: Installing nodejs modules with native extensions ...
-	#15835: Incompatibility between network-manager and libcurl 8.4
-
 2023.08.2, released October 15th, 2023

 	Important / security related fixes.
@@ -364,35 +156,6 @@

 	Removed packages: libasplib, ocf-linux, tovid

-2023.05.3, released September 26th, 2023
-
-	Important / security related fixes.
-
-	Defconfigs: PC x86-64 bios/efi: Needs libelf. Raspberrypi:
-	Also enable HDMI console when systemd is used.
-
-	Updated/fixed packages: agentpp, asterisk, at91dataflashboot,
-	aubio, berkeleydb, bind, bwm-ng, chocolate-doom, clamav,
-	compiler-rt, connman, cpio, cups, dav1d, diffutils, dracut,
-	dt, expect, fail2ban, fio, flite, freerdp, freeswitch,
-	fstrcmp, gcc, gdb, ghostscript, gmp, go, grub2, haproxy,
-	heirloom-mailx, hwloc, icu, intel-microcode, irssi, less,
-	libcoap, libcurl, libglib2, libiec61850, libjxl, libks,
-	libksba, libmodsecurity, libpjsip, libqb, libraw, libssh,
-	libtommath, lldpd, log4cxx, lsof, mdadm, mosquitto, mpd, mpv,
-	mutt, mv-ddr-marvell, ne10, netatalk, network-manager,
-	nftables, nodejs, ntpsec, nut, openblas, openjdk, openjdk-bin,
-	opensc, openssh, pcm-tools, perftest, petitboot, php, pixman,
-	poppler, postgresql, python-django, python-ipython,
-	python-pip, python-pylibfdt, python-tornado, python3, qt5,
-	ramspeed, rtl8189fs, rtl8812au-aircrack-ng, samba4, screen,
-	screenfetch, sngrep, sofia-sip, stellarium, stress-ng,
-	strongswan, sysstat, tar, tcl, uboot, uclibc, vim, webkitgtk,
-	webp, wireshark, xfsprogs, xserver_xorg-server, xterm, yajl,
-	zbar, zxing-cpp
-
-	New packages: xlib_libXpresent
-
 2023.05.2, released August 31th, 2023

 	Important / security related fixes.
@@ -530,117 +293,6 @@
 	#15376: Libiconv config
 	#15461: QtVirtualKeyboard segfaults

-2023.02.7, released November 14th, 2023
-
-	Important / security related fixes.
-
-	Per-package builds: Unbreak SDK relocation logic. Only drop
-	the hard links for the final host / target directory, fixing a
-	build time / size regression in 2023.02.6.
-
-	Packages where a free-form version/site can be specified
-	(E.G. Linux, U-Boot, ..) can now have the corresponding
-	tarballs of these custom downloads checked by the download
-	infrastructure based on .hash files in the global patch
-	directory. These hashes are optional unless
-	BR2_DOWNLOAD_FORCE_CHECK_HASHES is enabled.
-
-	A utils/add-custom-hashes helper script has been added to
-	assist in managing such hash files.
-
-	Defconfigs: stm32mp157a-dk1, stm32mp157c-dk2: Unbreak TF-A
-	build, stm32mp157c-odessey: Use a fixed TF-A version for
-	reproducibility
-
-	Updated/fixed packages: apache, arm-trusted-firmware, aufs,
-	aufs-util, azure-iot-sdk, cjson, cups-filters, clamav, dhcpcd,
-	freeradius-server, go, htop, ksmbd-tools, kvmtool, libgdiplus,
-	libopenssl, libosmium, libtommath, libupnp, libzlib, lxc,
-	mender, minizip-zlib, mpd, mxsldr, nano, nettle,
-	network-manager, nghttp2, nodejs, opencv4, opencv4-contrib,
-	openjdk-bin, openvpn, opusfile, paho-mqtt-c,
-	perl-lwp-protocol-https, php, python-django, python-urllib3,
-	python-web2py, rabbitmq-c, redis, riscv64-elf-toolchain,
-	suricata, tar, tiff, tor, traceroute, vim, websocketpp,
-	wireshark, wolfssl, xdg-dbus-proxy, xen, xlib_libX11,
-	xlib_libXpm, zabbix, zchunk
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#14741: e2fsck is failing during cronjob build where fail...
-	#15772: lz4 failed to compile with gcc 10.4.0
-	#15787: atmel_sama5d3_xplained_mmc_defconfig: Missing...
-	#15790: at91sam9x5ek_dev_defconfig: Missing...
-	#15820: make linux-menuconfig does not modify correct .config..
-	#15823: Installing nodejs modules with native extensions ...
-	#15835: Incompatibility between network-manager and libcurl 8.4
-
-2023.02.6, released October 16th, 2023
-
-	Important / security related fixes.
-
-	Per-package builds: Do not use hard links for host / target
-	dirs, fixing issues with package rebuilds or post-build
-	scripts modifications.
-
-	Infrastructure: Explicitly disable shuffle mode for Make >=
-	4.4 where needed.
-
-	Urandom-scripts: Move seedrng init script to S01 for earlier
-	random number entrophy initialization.
-
-	Go: Bump to 1.20.x as 1.19.x is now EOL and affected by
-	security issues.
-
-	Updated/fixed packages: at91bootstrap, bind, cups, efl,
-	enlightenment, exim, gcc, glibc, gnu-efi, go, go-bootstrap,
-	gptfdisk, gst-omx, gst1-devtools, gst1-libav,
-	gst1-plugins-bad, gst1-plugins-base, gst1-plugins-good,
-	gst1-plugins-ugly, gst1-python, gst1-rstp-server,
-	gst1-rtsp-vaapi, gstreamer1, gstreamer1-editing-services,
-	libcue, libcurl, libfastjson, libhtp, libmodplug, librsvg,
-	libvpx, libyang, linux-tools, mbedtls, mosquitto, mutt, neon,
-	netsnmp, nmap, nodejs, olsr, openblas, opkg-utils, php,
-	powertop, python-mako, python3, rockchip-mali, samba4, sslh,
-	suricata, tar, unifdef, unrandom-scripts, webkitgtk,
-	wireless-regdb, wpewebkit
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#15628: Missing dependencies in BR2_PACKAGE_PYTHON_MAKO
-	#15808: connman is not supported on musl
-	#15814: C++ not supported by bootlin toolchain
-
-2023.02.5, released September 27th, 2023
-
-	Important / security related fixes.
-
-	Updated/fixed packages: agentpp, asterisk, at91dataflashboot,
-	aubio, berkeleydb, bind, bwm-ng, chocolate-doom, clamav,
-	compiler-rt, connman, cups, dav1d, diffutils, dracut, dt,
-	expect, fail2ban, fio, flite, freerdp, freeswitch, fstrcmp,
-	gcc, gdb, ghostscript, gmp, go, grub2, haproxy,
-	heirloom-mailx, hwloc, icu, intel-microcode, irssi, libcoap,
-	libcurl, libiec61850, libjxl, libks, libksba, libmodsecurity,
-	libpjsip, libqb, libraw, libssh, libtommath, less, lldpd,
-	log4cxx, lsof, mdadm, mosquitto, mpd, mutt, mv-ddr-marvell,
-	ne10, netatalk, network-manager, nftables, nodejs, ntpsec,
-	nut, openblas, openjdk, openjdk-bin, opensc, openssh,
-	pcm-tools, perftest, php, pixman, poppler, postgresql, pppd,
-	python-django, python-ipython, python-pip, python-pylibfdt,
-	python-tornado, python3, qt5, ramspeed, rtl8189fs, samba4,
-	screen, screenfetch, sngrep, sofia-sip, stellarium,
-	strongswan, sysstat, tar, tcl, uboot, uclibc, vim, webkitgtk,
-	webp, wireshark, xfsprogs, xserver_xorg-server, xterm, yajl,
-	zbar, zxing-cpp
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#14366: Nodejs fails with "version `GLIBC_2.34' not found"..
-	#15754: The docker-engine and docker-cli versions are not...
-	#15787: atmel_sama5d3_xplained_mmc_defconfig: Missing...
-	#15790: at91sam9x5ek_dev_defconfig: Missing...
-
 2023.02.4, released August 31th, 2023

 	Important / security related fixes.
@@ -55,16 +55,6 @@ config BR2_HOST_GCC_AT_LEAST_9
 	default y if BR2_HOST_GCC_VERSION = "9"
 	select BR2_HOST_GCC_AT_LEAST_8

-config BR2_HOST_GCC_AT_LEAST_10
-	bool
-	default y if BR2_HOST_GCC_VERSION = "10"
-	select BR2_HOST_GCC_AT_LEAST_9
-
-config BR2_HOST_GCC_AT_LEAST_11
-	bool
-	default y if BR2_HOST_GCC_VERSION = "11"
-	select BR2_HOST_GCC_AT_LEAST_10
-
 # When adding new entries above, be sure to update
 # the HOSTCC_MAX_VERSION variable in the Makefile.

@@ -251,7 +241,7 @@ if !BR2_PRIMARY_SITE_ONLY

 config BR2_BACKUP_SITE
 	string "Backup download site"
-	default "https://sources.buildroot.net"
+	default "http://sources.buildroot.net"
 	help
 	  Backup site to download from. If this option is set then
 	  buildroot will fall back to download package sources from here
@@ -589,7 +579,7 @@ config BR2_GOOGLE_BREAKPAD_ENABLE
 	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 # C++11
 	depends on BR2_USE_WCHAR
 	depends on BR2_TOOLCHAIN_HAS_THREADS
-	depends on BR2_TOOLCHAIN_USES_GLIBC
+	depends on (BR2_TOOLCHAIN_USES_GLIBC || BR2_TOOLCHAIN_USES_UCLIBC)
 	depends on BR2_PACKAGE_GOOGLE_BREAKPAD_ARCH_SUPPORTS
 	depends on BR2_PACKAGE_HOST_GOOGLE_BREAKPAD_ARCH_SUPPORTS
 	select BR2_PACKAGE_GOOGLE_BREAKPAD
@@ -674,12 +664,12 @@ config BR2_PACKAGE_OVERRIDE_FILE
 	  documentation for more details on this feature.

 config BR2_GLOBAL_PATCH_DIR
-	string "global patch and hash directories"
+	string "global patch directories"
 	help
 	  You may specify a space separated list of one or more
-	  directories containing global package patches and/or hashes.
-	  For a specific version <packageversion> of a specific package
-	  <packagename>, patches are looked up as follows:
+	  directories containing global package patches. For a specific
+	  version <packageversion> of a specific package <packagename>,
+	  patches are applied as follows:

 	  First, the default Buildroot patch set for the package is
 	  applied from the package's directory in Buildroot.
@@ -693,8 +683,6 @@ config BR2_GLOBAL_PATCH_DIR
 	  exists, then all *.patch files in the directory will be
 	  applied.

-	  The hash files are looked up similarly to the patches.
-
 menu "Advanced"

 config BR2_FORCE_HOST_BUILD
@@ -709,21 +697,6 @@ config BR2_FORCE_HOST_BUILD

 	  This option will increase build time.

-config BR2_DOWNLOAD_FORCE_CHECK_HASHES
-	bool "Force all downloads to have a valid hash"
-	help
-	  Say 'y' here to enforce downloads to have at least one valid
-	  hash (and of course, that all hashes be valid).
-
-	  By default, Buildroot checks hashes of all packages
-	  downloaded, except those for which a custom version is
-	  used.
-
-	  With this option turned on, Buildroot will check hashes of
-	  all packages, including those that use a custom version. In
-	  order to provide hashes for such packages, place additional
-	  hash files in BR2_GLOBAL_PATCH_DIR directories.
-
 config BR2_REPRODUCIBLE
 	bool "Make the build reproducible (experimental)"
 	# SOURCE_DATE_EPOCH support in toolchain-wrapper requires GCC 4.4
@@ -763,20 +736,6 @@ config BR2_PER_PACKAGE_DIRECTORIES

 endmenu

-config BR2_TIME_BITS_64
-	bool "Build Y2038-ready code"
-	depends on BR2_TOOLCHAIN_USES_GLIBC && !BR2_ARCH_IS_64
-	help
-	  This option will pass -D_TIME_BITS=64 in the compiler flags
-	  to ensure the glibc C library uses a 64-bit representation
-	  for time_t and other time types, which ensures that
-	  programs/libraries will correctly handle time past year
-	  2038.
-
-	  This option only has an effect with glibc >= 2.34, as
-	  earlier glibc versions did not have support for 64-bit
-	  time_t.
-
 comment "Security Hardening Options"

 config BR2_PIC_PIE_ARCH_SUPPORTS
@@ -144,51 +144,6 @@ endif

 ###############################################################################

-comment "Legacy options removed in 2023.11"
-
-config BR2_PACKAGE_LIBCAMERA_PIPELINE_RASPBERRYPI
-	bool "libcamera pipeline 'raspberrypi' was renamed to 'rpi/vc4'"
-	depends on BR2_arm || BR2_aarch64
-	depends on BR2_USE_WCHAR
-	select BR2_LEGACY
-	select BR2_PACKAGE_LIBCAMERA_PIPELINE_RPI_VC4
-	help
-	  Since version 0.1.0 the libcamera pipeline option
-	  'raspberrypi' was renamed to 'rpi/vc4'.
-
-config BR2_PACKAGE_PYTHON_PYXB
-	bool "python-pyxb removed"
-	select BR2_LEGACY
-	help
-	  python-pyxb has been removed due to being abandoned and
-	  distutils no longer being supported in python 3.12.0.
-
-config BR2_PACKAGE_OPENJDK_VERSION_11
-	bool "openjdk 11 has been removed"
-	select BR2_LEGACY
-	help
-	  Version 11 of OpenJDK is no longer supported, version 17
-	  should now be used as the new LTS release.
-
-config BR2_KERNEL_HEADERS_6_4
-	bool "kernel headers version 6.4.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 6.4.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_PACKAGE_GOOGLE_MATERIAL_DESIGN_ICONS
-	bool "google-material-design-icons removed"
-	select BR2_LEGACY
-	help
-	  The google-material-design-icons package has been removed.
-
-config BR2_GDB_VERSION_10
-	bool "gdb 10.x removed"
-	select BR2_LEGACY
-	help
-	  gdb 10.x has been removed, use a newer version.
-
 comment "Legacy options removed in 2023.08"

 config BR2_TARGET_LPC32XXCDL
@@ -26,14 +26,6 @@
 #   infrastructure, and will be CC'ed on all patches that add or
 #   modify packages that use this infrastructure.

-N:	Adam Duskett <adam.duskett@amarulasolutions.com>
-F:	package/depot-tools/
-F:	package/flutter-engine/
-F:	package/flutter-gallery/
-F:	package/flutter-pi/
-F:	package/flutter-sdk-bin/
-F:	support/testing/tests/package/test_flutter.py
-
 N:	Adam Heinrich <adam@adamh.cz>
 F:	package/jack1/

@@ -66,11 +58,7 @@ F:	package/libmbim/
 F:	package/libqmi/
 F:	package/modem-manager/

-N:	Alessandro Partesotti <a.partesotti@gmail.com>
-F:	package/oatpp/
-
 N:	Alex Michel <alex.michel@wiedemann-group.com>
-F:	package/libzenoh-pico/
 F:	package/network-manager-openvpn/

 N:	Alex Suykov <alex.suykov@gmail.com>
@@ -133,7 +121,6 @@ N:	Alistair Francis <alistair@alistair23.me>
 F:	board/sifive/
 F:	boot/opensbi/
 F:	configs/hifive_unleashed_defconfig
-F:	package/libspdm/
 F:	package/xen/

 N:	Alvaro G. M <alvaro.gamez@hazent.com>
@@ -142,13 +129,7 @@ F:	package/libxmlrpc/
 F:	package/python-docopt/

 N:	Anand Gadiyar <gadiyar@ti.com>
-F:	board/ti/am62x-sk/
-F:	board/ti/am64x-sk/
-F:	boot/ti-k3-boot-firmware/
-F:	boot/ti-k3-image-gen/
 F:	boot/ti-k3-r5-loader/
-F:	configs/ti_am62x_sk_defconfig
-F:	configs/ti_am64x_sk_defconfig

 N:	André Zwing <nerv@dawncrow.de>
 F:	package/libkrb5/
@@ -182,7 +163,6 @@ F:	package/apparmor/
 F:	package/corkscrew/
 F:	package/cups/
 F:	package/cups-filters/
-F:	package/cutekeyboard/
 F:	package/fail2ban/
 F:	package/grep/
 F:	package/htpdate/
@@ -438,8 +418,6 @@ F:	package/mjpg-streamer/
 F:	package/mpg123/
 F:	package/ntp/
 F:	package/nut/
-F:	package/onevpl/
-F:	package/onevpl-intel-gpu/
 F:	package/opus/
 F:	package/pciutils/
 F:	package/perl-crypt-openssl-guess/
@@ -521,11 +499,6 @@ F:	package/iftop/
 F:	package/ncdu/

 N:	Brandon Maier <brandon.maier@collins.com>
-F:	board/freescale/ls1046a-frwy/
-F:	configs/ls1046a-frwy_defconfig
-F:	package/python-pysensors/
-F:	package/qoriq-fm-ucode/
-F:	package/unifdef/
 F:	package/vmtouch/

 N:	Brock Williams <brock@cottonwoodcomputer.com>
@@ -664,10 +637,6 @@ N:	Clément Péron <peron.clem@gmail.com>
 F:	board/beelink/gs1/
 F:	configs/beelink_gs1_defconfig

-N:	Colin Foster <colin.foster@in-advantage.com>
-F:	package/python-tftpy/
-F:	package/rauc-hawkbit-updater/
-
 N:	Corentin Guillevic <corentin.guillevic@smile.fr>
 F:	package/libloki/

@@ -853,7 +822,7 @@ F:	package/bayer2rgb-neon/
 F:	package/gstreamer1/gst1-plugins-bayer2rgb-neon/

 N:	Eric Le Bihan <eric.le.bihan.dev@free.fr>
-F:	docs/manual/adding-packages-meson.adoc
+F:	docs/manual/adding-packages-meson.txt
 F:	package/adwaita-icon-theme/
 F:	package/darkhttpd/
 F:	package/eudev/
@@ -1067,10 +1036,6 @@ F:	configs/freescale_imx6ullevk_defconfig
 N:	Falco Hyfing <hyfinglists@gmail.com>
 F:	package/python-pymodbus/

-N:	Flávio Tapajós <flavio.tapajos@newtesc.com.br>
-F:	configs/asus_tinker-s_rk3288_defconfig
-F:	board/asus/tinker-s/
-
 N:	Florian Fainelli <f.fainelli@gmail.com>
 F:	package/cpulimit/

@@ -1088,9 +1053,7 @@ N:	Francisco Gonzalez <gzmorell@gmail.com>
 F:	package/ser2net/

 N:	Francois Dugast <francois.dugast.foss@gmail.com>
-F:	board/sipeed/licheepi_nano/
 F:	board/visionfive2/
-F:	configs/sipeed_licheepi_nano_defconfig
 F:	configs/visionfive2_defconfig

 N:	Francois Perrad <francois.perrad@gadz.org>
@@ -1202,18 +1165,13 @@ F:	package/xapian/
 N:	Giulio Benetti <giulio.benetti@benettiengineering.com>
 F:	board/bananapi/bananapi-m2-ultra/
 F:	board/freescale/imx6ullevk/
-F:	board/freescale/imxrt1050evk/
 F:	board/olimex/a*
-F:	board/pine64/rockpro64
 F:	configs/amarula_vyasa_rk3288_defconfig
 F:	configs/asus_tinker_rk3288_defconfig
-F:	configs/bananapi_m2_berry_defconfig
 F:	configs/bananapi_m2_ultra_defconfig
 F:	configs/freescale_imx6ullevk_defconfig
 F:	configs/imx6ullevk_defconfig
-F:	configs/imxrt1050-evk_defconfig
 F:	configs/olimex_a*
-F:	configs/rockpro64_defconfig
 F:	package/at/
 F:	package/binutils/
 F:	package/cryptsetup/
@@ -1221,14 +1179,11 @@ F:	package/erlang-jiffy/
 F:	package/esp-hosted/
 F:	package/gcc/
 F:	package/harfbuzz/
-F:	package/libblockdev/
 F:	package/libfuse3/
 F:	package/libnspr/
 F:	package/libnss/
-F:	package/libnvme/
 F:	package/mali-driver/
 F:	package/minicom/
-F:	package/mongoose/
 F:	package/mmc-utils/
 F:	package/nfs-utils/
 F:	package/python-libconf/
@@ -1247,7 +1202,6 @@ F:	package/sunxi-mali-utgard/
 F:	package/sunxi-mali-utgard-driver/
 F:	package/sunxi-tools/
 F:	package/swugenerator/
-F:	package/swupdate/
 F:	package/trace-cmd/
 F:	package/udisks/
 F:	package/wilc-driver/
@@ -1423,12 +1377,79 @@ F:	package/fxdiv/
 F:	package/gensio/
 F:	package/lua-std-debug/
 F:	package/lua-std-normalize/
-F:	package/libucontext/
 F:	package/lilv/
 F:	package/lv2/
 F:	package/neon-2-sse/
 F:	package/pipewire/
-F:	package/python*
+F:	package/python-aioconsole/
+F:	package/python-aiodns/
+F:	package/python-aiohttp/
+F:	package/python-aiohttp-cors/
+F:	package/python-aiohttp-debugtoolbar/
+F:	package/python-aiohttp-jinja2/
+F:	package/python-aiohttp-mako/
+F:	package/python-aiohttp-remotes/
+F:	package/python-aiohttp-security/
+F:	package/python-aiohttp-session/
+F:	package/python-aiohttp-sse/
+F:	package/python-aiologstash/
+F:	package/python-aiomonitor/
+F:	package/python-aiojobs/
+F:	package/python-aioprocessing/
+F:	package/python-aiorwlock/
+F:	package/python-aiosignal/
+F:	package/python-aiozipkin/
+F:	package/python-argon2-cffi/
+F:	package/python-argon2-cffi-bindings/
+F:	package/python-async-generator/
+F:	package/python-async-lru/
+F:	package/python-async-timeout/
+F:	package/python-bidict/
+F:	package/python-brotli/
+F:	package/python-cbor2/
+F:	package/python-cchardet/
+F:	package/python-charset-normalizer/
+F:	package/python-cssselect2/
+F:	package/python-editables/
+F:	package/python-flatbuffers/
+F:	package/python-fonttools/
+F:	package/python-frozenlist/
+F:	package/python-greenlet/
+F:	package/python-h11/
+F:	package/python-hatchling/
+F:	package/python-hatch-fancy-pypi-readme/
+F:	package/python-hatch-vcs/
+F:	package/python-installer/
+F:	package/python-janus/
+F:	package/python-logstash/
+F:	package/python-maturin/
+F:	package/python-multidict/
+F:	package/python-mypy-extensions/
+F:	package/python-outcome/
+F:	package/python-pathspec/
+F:	package/python-pycares/
+F:	package/python-pydyf/
+F:	package/python-pypa-build/
+F:	package/python-pyphen/
+F:	package/python-pyproject-hooks/
+F:	package/python-rpds-py/
+F:	package/python-rtoml/
+F:	package/python-selenium/
+F:	package/python-snappy/
+F:	package/python-sniffio/
+F:	package/python-sockjs/
+F:	package/python-terminaltables/
+F:	package/python-tinycss2/
+F:	package/python-tomli/
+F:	package/python-trio/
+F:	package/python-trio-websocket/
+F:	package/python-typeguard/
+F:	package/python-typing-inspect/
+F:	package/python-uhid/
+F:	package/python-weasyprint/
+F:	package/python-wsproto/
+F:	package/python-yarl/
+F:	package/python-zopfli/
 F:	package/rtl8192eu/
 F:	package/serd/
 F:	package/sord/
@@ -1441,6 +1462,7 @@ F:	support/testing/tests/package/test_python_rtoml.py
 N:	James Knight <james.knight@collins.com>
 F:	package/atkmm/
 F:	package/cairomm/
+F:	package/google-material-design-icons/
 F:	package/glibmm/
 F:	package/gtkmm3/
 F:	package/libpqxx/
@@ -1449,15 +1471,6 @@ F:	package/rpm/
 F:	package/swaybg/
 F:	package/yad/

-N:	Jamie Gibbons <jamie.gibbons@microchip.com>
-F:	board/microchip/mpfs_icicle/
-F:	configs/microchip_mpfs_icicle_defconfig
-F:	package/microchip-hss-payload-generator/
-
-N:	Jan Havran <havran.jan@email.cz>
-F:	board/pine64/pinecube/
-F:	configs/pine64_pinecube_defconfig
-
 N:	Jan Heylen <jan.heylen@nokia.com>
 F:	package/opentracing-cpp/

@@ -1484,10 +1497,6 @@ F:	package/quota/
 N:	Jason Pruitt <jrspruitt@gmail.com>
 F:	package/librtlsdr/

-N:	Javad Rahimi <javad321javad@gmail.com>
-F:	board/orangepi/orangepi-pc2
-F:	configs/orangepi_pc2_defconfig
-
 N:	Jean Burgat <jeanburgat33@gmail.com>
 F:	package/openfpgaloader/

@@ -1516,10 +1525,6 @@ F:	package/strongswan/
 F:	package/wmctrl/
 F:	package/x11r7/xdriver_xf86-video-imx/

-N:	Jesse Taube <Mr.Bossman075@gmail.com>
-F:	board/freescale/imxrt1050evk/
-F:	configs/imxrt1050-evk_defconfig
-
 N:	Jesse Van Gavere <jesseevg@gmail.com>
 F:	package/qt6/

@@ -1764,10 +1769,6 @@ F:	support/testing/tests/package/test_hwloc.py
 F:	support/testing/tests/package/test_iperf3.py
 F:	support/testing/tests/package/test_kexec.py
 F:	support/testing/tests/package/test_kexec/
-F:	support/testing/tests/package/test_kmscube.py
-F:	support/testing/tests/package/test_kmscube/
-F:	support/testing/tests/package/test_less.py
-F:	support/testing/tests/package/test_libgpgme.py
 F:	support/testing/tests/package/test_libjxl.py
 F:	support/testing/tests/package/test_lrzip.py
 F:	support/testing/tests/package/test_lzip.py
@@ -1794,12 +1795,7 @@ F:	support/testing/tests/package/test_python_pyalsa.py
 F:	support/testing/tests/package/test_python_spake2.py
 F:	support/testing/tests/package/test_rdma_core.py
 F:	support/testing/tests/package/test_rdma_core/
-F:	support/testing/tests/package/test_screen.py
 F:	support/testing/tests/package/test_stress_ng.py
-F:	support/testing/tests/package/test_tcl.py
-F:	support/testing/tests/package/test_tcl/
-F:	support/testing/tests/package/test_weston.py
-F:	support/testing/tests/package/test_weston/
 F:	support/testing/tests/package/test_xz.py
 F:	support/testing/tests/package/test_z3.py
 F:	support/testing/tests/package/test_z3/
@@ -1954,10 +1950,6 @@ F:	package/python-simplejson/
 F:	package/python-versiontools/
 F:	package/wilc-firmware/

-N:	Ludwig Kormann <ludwig.kormann@ict42.de>
-F:	board/in-circuit/
-F:	configs/icnova*
-
 N:	Maeva Manuel <maeva.manuel@oss.nxp.com>
 F:	board/freescale/imx8qmmek/
 F:	configs/freescale_imx8qmmek_defconfig
@@ -1977,10 +1969,8 @@ F:	package/ecryptfs-utils/
 N:	Marcin Niestroj <m.niestroj@grinn-global.com>
 F:	board/grinn/
 F:	board/orangepi/orangepi-zero-plus/
-F:	board/orangepi/orangepi-zero3/
 F:	configs/grinn_*
 F:	configs/orangepi_zero_plus_defconfig
-F:	configs/orangepi_zero3_defconfig
 F:	package/argparse/
 F:	package/dt-utils/
 F:	package/easydbus/
@@ -2014,7 +2004,6 @@ F:	support/testing/tests/package/test_python_pytest.py
 F:	support/testing/tests/package/test_python_pytest_asyncio.py

 N:	Marcus Folkesson <marcus.folkesson@gmail.com>
-F:	package/criu/
 F:	package/libcamera/
 F:	package/libcamera-apps/
 F:	package/libostree/
@@ -2104,9 +2093,6 @@ F:	package/python-txaio/
 F:	package/python-ujson/
 F:	package/python-wsaccel/

-N:	Maksim Kiselev <bigunclemax@gmail.com>
-F:	package/ledmon/
-
 N:	Max Filippov <jcmvbkbc@gmail.com>
 F:	arch/Config.in.xtensa

@@ -2167,8 +2153,8 @@ F:	package/openrc/
 F:	package/skeleton-init-openrc/

 N:	Michel Stempin <michel.stempin@wanadoo.fr>
-F:	board/sipeed/licheepi_zero/
-F:	configs/sipeed_licheepi_zero_defconfig
+F:	board/licheepi/
+F:	configs/licheepi_zero_defconfig

 N:	Mike Frampton <mikeframpo@gmail.com>
 F:	package/qcom-db410c-firmware/
@@ -2201,7 +2187,6 @@ F:	board/versal/
 F:	board/zynq/
 F:	board/zynqmp/
 F:	configs/versal_vck190_defconfig
-F:	configs/zynq_zc702_defconfig
 F:	configs/zynq_zc706_defconfig
 F:	configs/zynqmp_kria_kv260_defconfig
 F:	configs/zynqmp_zcu102_defconfig
@@ -2395,7 +2380,6 @@ F:	support/testing/tests/package/test_docker_compose.py

 N:	Peter Seiderer <ps.report@gmx.net>
 F:	package/dotconf/
-F:	package/fft-eval/
 F:	package/python-blinker/
 F:	package/qt5/qt5speech/
 F:	package/speechd/
@@ -2521,7 +2505,6 @@ F:	support/testing/tests/package/test_python_rsa.py
 F:	support/testing/tests/package/test_python_s3transfer.py

 N:	Raphael Pavlidis <raphael.pavlidis@gmail.com>
-F:	package/nvidia-persistenced/
 F:	package/shadow/
 F:	package/slirp4netns/
 F:	package/sway/
@@ -2566,10 +2549,6 @@ F:	package/mhz/
 N:	Robert Rose <robertroyrose@gmail.com>
 F:	package/grpc/

-N:	Roberto Medina <robertoxmed@gmail.com>
-F:	board/firefly/roc-rk3399-pc/
-F:	configs/roc_pc_rk3399_defconfig
-
 N:	Rodrigo Rebello <rprebello@gmail.com>
 F:	package/chocolate-doom/
 F:	package/irssi/
@@ -2623,11 +2602,8 @@ F:	package/upower/
 F:	package/waffle/
 F:	package/xenomai/
 F:	package/zziplib/
-F:	support/testing/tests/package/sample_python_mako.py
-F:	support/testing/tests/package/sample_python_mako_ext.py
 F:	support/testing/tests/package/test_glxinfo.py
 F:	support/testing/tests/package/test_openssh.py
-F:	support/testing/tests/package/test_python_mako.py
 F:	toolchain/

 N:	Rufus Segar <rhs@riseup.net>
@@ -2636,10 +2612,6 @@ F:	package/agent-proxy/
 N:	Ryan Wilkins <ryan@deadfrog.net>
 F:	package/biosdevname/

-N:	Saeed Kazemi <kazemi.ms@gmail.com>
-F:	package/eza/
-F:	package/procs/
-
 N:	Sam Lancia <sam@gpsm.co.uk>
 F:	package/lrzip/

@@ -2660,14 +2632,6 @@ F:	support/misc/toolchainfile.cmake.in
 N:	Sam Voss <sam.voss@gmail.com>
 F:	package/ripgrep/

-N:	Sebastian Weyer <sebastian.weyer@smile.fr>
-F:      package/amlogic-boot-fip/
-F:	package/nushell/
-F:	package/rust-bindgen/
-F:	package/spirv-headers/
-F:	support/testing/tests/package/sample_nu.nu
-F:	support/testing/tests/package/test_nu.py
-
 N:	Sébastien Szymanski <sebastien.szymanski@armadeus.com>
 F:	package/mmc-utils/
 F:	package/python-flask-jsonrpc/
@@ -2770,10 +2734,6 @@ F:	package/libvpx/
 F:	package/mesa3d-demos/
 F:	package/ti-gfx/

-N:	Stefan Nickl <Stefan.Nickl@gmail.com>
-F:	board/freescale/imx8dxlevk/
-F:	configs/freescale_imx8dxlevk_defconfig
-
 N:	Stefan Ott <stefan@ott.net>
 F:	package/unbound/

@@ -2833,10 +2793,6 @@ F:	package/reproc/
 F:	package/termcolor/
 F:	package/tl-expected/

-N:	Takumi Takahashi <takumiiinn@gmail.com>
-F:	package/gsettings-desktop-schemas/
-F:	package/libcanberra/
-
 N:	Tan En De <ende.tan@starfivetech.com>
 F:	package/libkcapi/

@@ -2902,7 +2858,6 @@ F:	toolchain/

 N:	Thomas Devoogdt <thomas@devoogdt.com>
 F:	package/fluent-bit/
-F:	package/libsoup3/

 N:	Thomas Huth <huth@tuxfamily.org>
 F:	board/qemu/m68k-mcf5208/
@@ -3089,7 +3044,6 @@ F:	package/mksh/
 F:	package/ruby/
 F:	package/uclibc/
 F:	package/uclibc-ng-test/
-F:	support/testing/tests/package/test_ruby.py

 N:	Will Newton <will.newton@gmail.com>
 F:	package/enchant/
@@ -3101,11 +3055,6 @@ F:	package/time/
 N:	Will Wagner <will_wagner@carallon.com>
 F:	package/yaffs2utils/

-N:	Witold Lipieta <witold.lipieta@thaumatec.com>
-F:	package/python-segno/
-F:	support/testing/tests/package/sample_python_segno.py
-F:	support/testing/tests/package/test_python_segno.py
-
 N:	Wojciech M. Zabolotny <wzab01@gmail.com>
 F:	package/avrdude/
 F:	package/jack2/
@@ -3115,18 +3064,8 @@ F:	package/python-pyusb/
 N:	Wojciech Niziński <niziak@spox.org>
 F:	package/fwup/

-N:	Woodrow Douglass <wdouglass@carnegierobotics.com>
-F:	package/opencv4
-F:	package/opencv4-contrib
-
 N:	Xuanhao Shi <X15000177@gmail.com>
-F:	board/ti/am62x-sk/
-F:	board/ti/am64x-sk/
-F:	boot/ti-k3-boot-firmware/
-F:	boot/ti-k3-image-gen/
 F:	boot/ti-k3-r5-loader/
-F:	configs/ti_am62x_sk_defconfig
-F:	configs/ti_am64x_sk_defconfig

 N:	Yair Ben Avraham <yairba@protonmail.com>
 F:	package/casync/
@@ -3183,7 +3122,6 @@ F:	package/zisofs-tools/
 F:	support/download/

 N:	Yann E. MORIN <yann.morin@orange.com>
-F:	.editorconfig
 F:	package/gpsd/

 N:	Yegor Yefremov <yegorslists@googlemail.com>
@@ -3258,7 +3196,6 @@ F:	package/libusb-compat/
 F:	package/proj/
 F:	package/python-iniparse/
 F:	package/qjson/
-F:	package/qt6/qt6core5compat/
 F:	package/quazip/
 F:	package/shapelib/
 F:	package/simple-mail/
@@ -90,9 +90,9 @@ all:
 .PHONY: all

 # Set and export the version string
-export BR2_VERSION := 2023.11.1
+export BR2_VERSION := 2023.08.2
 # Actual time the release is cut (for reproducible builds)
-BR2_VERSION_EPOCH = 1705314000
+BR2_VERSION_EPOCH = 1697404000

 # Save running make version since it's clobbered by the make package
 RUNNING_MAKE_VERSION := $(MAKE_VERSION)
@@ -227,6 +227,8 @@ LEGAL_MANIFEST_CSV_HOST = $(LEGAL_INFO_DIR)/host-manifest.csv
 LEGAL_WARNINGS = $(LEGAL_INFO_DIR)/.warnings
 LEGAL_REPORT = $(LEGAL_INFO_DIR)/README

+CPE_UPDATES_DIR = $(BASE_DIR)/cpe-updates
+
 BR2_CONFIG = $(CONFIG_DIR)/.config

 # Pull in the user's configuration file
@@ -351,7 +353,7 @@ export HOSTARCH := $(shell LC_ALL=C $(HOSTCC_NOCCACHE) -v 2>&1 | \

 # When adding a new host gcc version in Config.in,
 # update the HOSTCC_MAX_VERSION variable:
-HOSTCC_MAX_VERSION := 11
+HOSTCC_MAX_VERSION := 9

 HOSTCC_VERSION := $(shell V=$$($(HOSTCC_NOCCACHE) --version | \
 	sed -n -r 's/^.* ([0-9]*)\.([0-9]*)\.([0-9]*)[ ]*.*/\1 \2/p'); \
@@ -592,13 +594,8 @@ world: target-post-image
 .PHONY: prepare-sdk
 prepare-sdk: world
 	@$(call MESSAGE,"Rendering the SDK relocatable")
-	PARALLEL_JOBS=$(PARALLEL_JOBS) \
-		PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) \
-		$(TOPDIR)/support/scripts/fix-rpath host
-	PARALLEL_JOBS=$(PARALLEL_JOBS) \
-		PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) \
-		$(TOPDIR)/support/scripts/fix-rpath staging
-	$(call ppd-fixup-paths,$(BASE_DIR))
+	PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) $(TOPDIR)/support/scripts/fix-rpath host
+	PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) $(TOPDIR)/support/scripts/fix-rpath staging
 	$(INSTALL) -m 755 $(TOPDIR)/support/misc/relocate-sdk.sh $(HOST_DIR)/relocate-sdk.sh
 	mkdir -p $(HOST_DIR)/share/buildroot
 	echo $(HOST_DIR) > $(HOST_DIR)/share/buildroot/sdk-location
@@ -715,7 +712,7 @@ STAGING_DIR_FILES_LISTS = $(sort $(wildcard $(BUILD_DIR)/*/.files-list-staging.t
 .PHONY: host-finalize
 host-finalize: $(PACKAGES) $(HOST_DIR) $(HOST_DIR_SYMLINK)
 	@$(call MESSAGE,"Finalizing host directory")
-	$(call per-package-rsync,$(sort $(PACKAGES)),host,$(HOST_DIR),copy)
+	$(call per-package-rsync,$(sort $(PACKAGES)),host,$(HOST_DIR))

 .PHONY: staging-finalize
 staging-finalize: $(STAGING_DIR_SYMLINK)
@@ -723,7 +720,7 @@ staging-finalize: $(STAGING_DIR_SYMLINK)
 .PHONY: target-finalize
 target-finalize: $(PACKAGES) $(TARGET_DIR) host-finalize
 	@$(call MESSAGE,"Finalizing target directory")
-	$(call per-package-rsync,$(sort $(PACKAGES)),target,$(TARGET_DIR),copy)
+	$(call per-package-rsync,$(sort $(PACKAGES)),target,$(TARGET_DIR))
 	$(foreach hook,$(TARGET_FINALIZE_HOOKS),$($(hook))$(sep))
 	rm -rf $(TARGET_DIR)/usr/include $(TARGET_DIR)/usr/share/aclocal \
 		$(TARGET_DIR)/usr/lib/pkgconfig $(TARGET_DIR)/usr/share/pkgconfig \
@@ -768,9 +765,7 @@ endif
 	ln -sf ../usr/lib/os-release $(TARGET_DIR)/etc

 	@$(call MESSAGE,"Sanitizing RPATH in target tree")
-	PARALLEL_JOBS=$(PARALLEL_JOBS) \
-		PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) \
-		$(TOPDIR)/support/scripts/fix-rpath target
+	PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) $(TOPDIR)/support/scripts/fix-rpath target

 # For a merged /usr, ensure that /lib, /bin and /sbin and their /usr
 # counterparts are appropriately setup as symlinks ones to the others.
@@ -836,7 +831,7 @@ legal-info-clean:
 .PHONY: legal-info-prepare
 legal-info-prepare: $(LEGAL_INFO_DIR)
 	@$(call MESSAGE,"Buildroot $(BR2_VERSION_FULL) Collecting legal info")
-	@$(call legal-license-file,HOST,buildroot,buildroot,COPYING,COPYING,support/legal-info/buildroot.hash)
+	@$(call legal-license-file,buildroot,buildroot,support/legal-info/buildroot.hash,COPYING,COPYING,HOST)
 	@$(call legal-manifest,TARGET,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,SOURCE SITE,DEPENDENCIES WITH LICENSES)
 	@$(call legal-manifest,HOST,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,SOURCE SITE,DEPENDENCIES WITH LICENSES)
 	@$(call legal-manifest,HOST,buildroot,$(BR2_VERSION_FULL),GPL-2.0+,COPYING,not saved,not saved)
@@ -1102,7 +1097,8 @@ show-vars:
 clean:
 	rm -rf $(BASE_TARGET_DIR) $(BINARIES_DIR) $(HOST_DIR) $(HOST_DIR_SYMLINK) \
 		$(BUILD_DIR) $(BASE_DIR)/staging \
-		$(LEGAL_INFO_DIR) $(GRAPHS_DIR) $(PER_PACKAGE_DIR) $(O)/pkg-stats.*
+		$(LEGAL_INFO_DIR) $(GRAPHS_DIR) $(PER_PACKAGE_DIR) $(CPE_UPDATES_DIR) \
+		$(O)/pkg-stats.*

 .PHONY: distclean
 distclean: clean
@@ -40,8 +40,8 @@ choice
 	help
 	  Specific CPU variant to use

-	  64bit capable: mips4, 64, 64r2, 64r3, 64r5, 64r6
-	  non-64bit capable: mips4, 32, 32r2, 32r3, 32r5, 32r6
+	  64bit capable: 64, 64r2, 64r3, 64r5, 64r6
+	  non-64bit capable: 32, 32r2, 32r3, 32r5, 32r6

 config BR2_mips_32
 	bool "Generic MIPS32"
@@ -97,8 +97,6 @@ config BR2_mips_xburst
 	  to be used in order to prevent emitting these instructions.

 	  See http://www.ingenic.com/en/?xburst.html
-config BR2_mips4
-	bool "MIPS IV"
 config BR2_mips_64
 	bool "Generic MIPS64"
 	depends on BR2_ARCH_IS_64
@@ -264,7 +262,6 @@ config BR2_GCC_TARGET_ARCH
 	default "octeon2"	if BR2_mips_octeon2
 	default "octeon3"	if BR2_mips_octeon3
 	default "p6600"		if BR2_mips_p6600
-	default "mips4"		if BR2_mips4

 config BR2_MIPS_OABI32
 	bool
@@ -146,6 +146,21 @@ config BR2_powerpc_power9
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_6
 endchoice

+choice
+	prompt "Target ABI"
+	default BR2_powerpc_SPE if BR2_POWERPC_CPU_HAS_SPE
+	default BR2_powerpc_CLASSIC
+	help
+	  Application Binary Interface to use
+
+config BR2_powerpc_CLASSIC
+	bool "Classic"
+	depends on !BR2_POWERPC_CPU_HAS_SPE
+config BR2_powerpc_SPE
+	bool "SPE"
+	depends on BR2_POWERPC_CPU_HAS_SPE
+endchoice
+
 config BR2_POWERPC_SOFT_FLOAT
 	bool "Use soft-float"
 	select BR2_SOFT_FLOAT
@@ -1,5 +1,26 @@
 # RISC-V CPU ISA extensions.

+config BR2_RISCV_ISA_RVI
+	bool
+
+config BR2_RISCV_ISA_RVM
+	bool
+
+config BR2_RISCV_ISA_RVA
+	bool
+
+config BR2_RISCV_ISA_RVF
+	bool
+
+config BR2_RISCV_ISA_RVD
+	bool
+
+config BR2_RISCV_ISA_RVC
+	bool
+
+config BR2_RISCV_ISA_RVV
+	bool
+
 choice
 	prompt "Target Architecture Variant"
 	default BR2_riscv_g
@@ -20,31 +41,38 @@ config BR2_riscv_custom

 endchoice

+if BR2_riscv_custom
+
 comment "Instruction Set Extensions"

-config BR2_RISCV_ISA_RVI
-	bool "Base Integer (I)"
-
-config BR2_RISCV_ISA_RVM
+config BR2_RISCV_ISA_CUSTOM_RVM
 	bool "Integer Multiplication and Division (M)"
+	select BR2_RISCV_ISA_RVM

-config BR2_RISCV_ISA_RVA
+config BR2_RISCV_ISA_CUSTOM_RVA
 	bool "Atomic Instructions (A)"
+	select BR2_RISCV_ISA_RVA

-config BR2_RISCV_ISA_RVF
+config BR2_RISCV_ISA_CUSTOM_RVF
 	bool "Single-precision Floating-point (F)"
+	select BR2_RISCV_ISA_RVF

-config BR2_RISCV_ISA_RVD
+config BR2_RISCV_ISA_CUSTOM_RVD
 	bool "Double-precision Floating-point (D)"
 	depends on BR2_RISCV_ISA_RVF
+	select BR2_RISCV_ISA_RVD

-config BR2_RISCV_ISA_RVC
+config BR2_RISCV_ISA_CUSTOM_RVC
 	bool "Compressed Instructions (C)"
+	select BR2_RISCV_ISA_RVC

-config BR2_RISCV_ISA_RVV
+config BR2_RISCV_ISA_CUSTOM_RVV
 	bool "Vector Instructions (V)"
+	select BR2_RISCV_ISA_RVV
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_12

+endif
+
 choice
 	prompt "Target Architecture Size"
 	default BR2_RISCV_64
@@ -1,51 +0,0 @@
-From 336dc301e02d64507447f82020ce7a349797bef3 Mon Sep 17 00:00:00 2001
-From: Peter Korsgaard <peter@korsgaard.com>
-Date: Sun, 5 Nov 2023 14:59:16 +0100
-Subject: [PATCH] stm32mp157a-avenger96.dts: enable hash device to unbreak boot
- issue
-
-The avenger96 board was forgotten when authentication support was added with
-commit 4bdb1a7a6a1325343 (stm32mp1: add authentication support for
-stm32image), causing a panic when stm32mp_init_auth() is called, so fix it
-similar to how it was done for the STM32MP157C-ED1 board with:
-
-commit b37b52ef8bc05bfd8dcca992d4ba84cd7c5d23bb
-Author: Yann Gautier <yann.gautier@st.com>
-Date:   Tue Oct 13 18:05:06 2020 +0200
-
-    fdts: add missing hash node in STM32MP157C-ED1 board DT
-
-    Without this node, the board fails to boot and panics in the function
-    stm32mp_init_auth().
-
-    Change-Id: Ia54924410dac2a8c94dd6e45d7e93977fe7d87e2
-    Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
-Upstream: N/A - Upstream reworked authentication to skip it for MP157A
- variant since v2.7, see "feat(st): disable authentication based on
- part_number"
- (https://github.com/ARM-software/arm-trusted-firmware/commit/49abdfd8cececb91a4bc7e7b29a30c09dce461c7)
-
-Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
---
- fdts/stm32mp157a-avenger96.dts | 4 ++++
- 1 file changed, 4 insertions(+)
-
-diff --git a/fdts/stm32mp157a-avenger96.dts b/fdts/stm32mp157a-avenger96.dts
-index b967736e4..76edecb83 100644
--- a/fdts/stm32mp157a-avenger96.dts
-+++ b/fdts/stm32mp157a-avenger96.dts
-@@ -271,6 +271,10 @@
- 	};
- };
- 
-+&hash1 {
-+	status = "okay";
-+};
-+
- &rng1 {
- 	status = "okay";
- };
-- 
-2.39.2
-
@@ -1,4 +0,0 @@
-label Tinker linux
-  kernel /boot/uImage
-  devicetree /boot/rk3288-tinker-s.dtb
-  append console=ttyS2,115200n8 root=179:1 rootwait
@@ -1,9 +0,0 @@
-#!/bin/sh
-
-MKIMAGE=$HOST_DIR/bin/mkimage
-BOARD_DIR="$(dirname "$0")"
-
-$MKIMAGE -n rk3288 -T rksd -d "$BINARIES_DIR"/u-boot-tpl.bin "$BINARIES_DIR"/u-boot-tpl.img
-cat "$BINARIES_DIR"/u-boot-tpl.img "$BINARIES_DIR"/u-boot-spl-dtb.bin > "$BINARIES_DIR"/u-boot-tpl-spl-dtb.img
-
-install -m 0644 -D "$BOARD_DIR"/extlinux.conf "$TARGET_DIR"/boot/extlinux/extlinux.conf
@@ -1,43 +0,0 @@
-Tinker S RK3288
-=============
-
-Tinker Board is a Single Board Computer (SBC) in an ultra-small form
-factor that offers class-leading performance while leveraging outstanding
-mechanical compatibility. The "S" variant of the Tinker Board has eMMC
-
-Tinker link:
-https://www.asus.com/br/motherboards-components/single-board-computer/all-series/tinker-board-s/
-
-Wiki link:
-https://openedev.amarulasolutions.com/display/ODWIKI/Tinker+RK3288
-
-How to build it
-===============
-
-  $ make asus_tinker-s_rk3288_defconfig
-
-Then you can edit the build options using
-
-  $ make menuconfig
-
-Compile all and build rootfs image:
-
-  $ make
-
-Prepare your SDCard
-===================
-
-Buildroot generates a ready-to-use SD card image that you can flash directly to
-the card. The image will be in output/images/sdcard.img.
-You can write this image directly to an SD card device (i.e. /dev/xxx):
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/xxx
-  $ sudo sync
-
-Finally, you can insert the SD card to the Tinker RK3288 board and boot it.
-
-NOTE:
-USB power supply requires more than the standard 500mA USB current, so
-this board must be supplied from a capable port or from an external
-AC/DC adapter. Otherwise it will hang forever while loading the kernel
-image.
@@ -1,4 +0,0 @@
-label Bananapi M2 Berry linux
-  kernel /boot/zImage
-  devicetree /boot/sun8i-v40-bananapi-m2-berry.dtb
-  append console=ttyS0,115200n8 root=/dev/mmcblk0p1 rootwait
@@ -1,16 +0,0 @@
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot-sunxi-with-spl.bin"
-		offset = 8K
-		size = 1016K # 1MB - 8KB
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
@@ -1,6 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname "$0")"
-
-install -m 644 -D "${BOARD_DIR}"/extlinux.conf \
-	"${TARGET_DIR}"/boot/extlinux/extlinux.conf
@@ -1,35 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Bananapi M2 Berry. With the current
-configuration it will bring-up the board, and allow access through the
-serial console.
-
-Bananapi M2 Berry link:
-https://wiki.banana-pi.org/Banana_Pi_BPI-M2_Berry
-
-This configuration uses U-Boot mainline and kernel mainline.
-
-How to build
-============
-
-    $ make bananapi_m2_berry_defconfig
-    $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
-  $ sudo sync
-
-Insert the micro SDcard in your Bananapi M2 Berry and power it up. The console
-is on the serial line, 115200 8N1.
@@ -1,5 +1,7 @@
-setenv fdt_high ffffffff
 setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
+
+mmc dev 0
 fatload mmc 0 $kernel_addr_r zImage
-fatload mmc 0 $fdt_addr_r sun7i-a20-icnova-a20-adb4006.dtb
+fatload mmc 0 $fdt_addr_r sun8i-r40-bananapi-m2-ultra.dtb
+
 bootz $kernel_addr_r - $fdt_addr_r
@@ -1,4 +0,0 @@
-label Bananapi M2 Ultra linux
-  kernel /boot/zImage
-  devicetree /boot/sun8i-r40-bananapi-m2-ultra.dtb
-  append console=ttyS0,115200n8 root=/dev/mmcblk0p1 rootwait
@@ -1,3 +1,15 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"zImage",
+			"sun8i-r40-bananapi-m2-ultra.dtb",
+			"boot.scr"
+		}
+	}
+
+	size = 64M
+}
+
 image sdcard.img {
 	hdimage {
 	}
@@ -9,6 +21,12 @@ image sdcard.img {
 		size = 1016K # 1MB - 8KB
 	}

+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
 	partition rootfs {
 		partition-type = 0x83
 		image = "rootfs.ext4"
@@ -1,6 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname "$0")"
-
-install -m 644 -D "${BOARD_DIR}"/extlinux.conf \
-	"${TARGET_DIR}"/boot/extlinux/extlinux.conf
@@ -1,4 +0,0 @@
-label RK3399RocPC linux
-  kernel /boot/Image
-  devicetree /boot/rk3399-roc-pc.dtb
-  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk0p1 rootwait
@@ -1,22 +0,0 @@
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot-tpl-spl-dtb {
-		in-partition-table = "no"
-		image = "idbloader.img"
-		offset = 32K
-	}
-
-	partition u-boot-dtb {
-		in-partition-table = "no"
-		image = "u-boot.itb"
-		offset = 8M
-		size = 30M
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname "$0")"
-
-install -m 0644 -D "$BOARD_DIR"/extlinux.conf "$TARGET_DIR"/boot/extlinux/extlinux.conf
@@ -1,40 +0,0 @@
-Libre Computer Board ROC-RK3399-PC
-===================================
-
-Build:
-
-  $ make roc_pc_rk3399_defconfig
-  $ make
-
-Files created in output directory
-=================================
-
-output/images
-
-├── bl31.elf
-├── idbloader.img
-├── Image
-├── rk3399-roc-pc.dtb
-├── rootfs.ext2
-├── rootfs.ext4 -> rootfs.ext2
-├── rootfs.tar
-├── sdcard.img
-├── u-boot.bin
-└── u-boot.itb
-
-Creating bootable SD card:
-==========================
-
-Simply invoke (as root)
-
-sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
-
-Where X is your SD card device
-
-Serial console
--------------
-
-Baudrate for this board is 1500000
-
-Wiki link:
-https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/roc-rk3399-pc.html
@@ -63,8 +63,6 @@ main ()
 		dd if=${BINARIES_DIR}/u-boot-hash.bin of=${BINARIES_DIR}/u-boot-atf.bin bs=1K seek=128
 		if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8=y$" ${BR2_CONFIG}; then
 			${HOST_DIR}/bin/mkimage_imx8 -soc QM -rev B0 -append ${BINARIES_DIR}/ahab-container.img -c -scfw ${BINARIES_DIR}/mx8qm-mek-scfw-tcm.bin -ap ${BINARIES_DIR}/u-boot-atf.bin a53 0x80000000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
-	        elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8DXL=y$" ${BR2_CONFIG}; then
-			${HOST_DIR}/bin/mkimage_imx8 -soc DXL -rev B0 -append ${BINARIES_DIR}/ahab-container.img -c -scfw ${BINARIES_DIR}/mx8dxl-evk-scfw-tcm.bin -ap ${BINARIES_DIR}/u-boot-atf.bin a35 0x80000000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
 		else
 			${HOST_DIR}/bin/mkimage_imx8 -soc QX -rev B0 -append ${BINARIES_DIR}/ahab-container.img -c -scfw ${BINARIES_DIR}/mx8qx-mek-scfw-tcm.bin -ap ${BINARIES_DIR}/u-boot-atf.bin a35 0x80000000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
 		fi
@@ -46,8 +46,6 @@ genimage_type()
 		echo "genimage.cfg.template_imx8"
 	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X=y$" ${BR2_CONFIG}; then
 		echo "genimage.cfg.template_imx8"
-	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8DXL=y$" ${BR2_CONFIG}; then
-		echo "genimage.cfg.template_imx8"
 	elif grep -Eq "^BR2_LINUX_KERNEL_INSTALL_TARGET=y$" ${BR2_CONFIG}; then
 		if grep -Eq "^BR2_TARGET_UBOOT_SPL=y$" ${BR2_CONFIG}; then
 		    echo "genimage.cfg.template_no_boot_part_spl"
@@ -1,69 +0,0 @@
-******************************
-Freescale i.MX8DXL WEVK board
-******************************
-
-This file documents the Buildroot support for the Freescale i.MX8DXL WEVK
-board.
-
-Build
-=====
-
-First, configure Buildroot for the i.MX8DXL WEVK board:
-
-  make freescale_imx8dxlevk_defconfig
-
-Build all components:
-
-  make
-
-You will find in output/images/ the following files:
-  - ahab-container.img
-  - bl31.bin
-  - boot.vfat
-  - Image
-  - imx8-boot-sd.bin
-  - imx8dxl-evk.dtb
-  - mkimg.commit
-  - mx8dxl-ddr3-evk-scfw-tcm.bin
-  - mx8dxl-evk-scfw-tcm.bin
-  - mx8dxl-phantom-mek-scfw-tcm.bin
-  - mx8dxl-val-scfw-tcm.bin
-  - rootfs.ext2
-  - rootfs.ext4
-  - rootfs.tar
-  - sdcard.img
-  - u-boot-atf.bin
-  - u-boot.bin
-  - u-boot-hash.bin
-
-Create a bootable SD card
-=========================
-
-To determine the device associated to the SD card have a look in the
-/proc/partitions file:
-
-  cat /proc/partitions
-
-Buildroot prepares a bootable "sdcard.img" image in the output/images/
-directory, ready to be dumped on a SD card. Launch the following
-command as root:
-
-  dd if=output/images/sdcard.img of=/dev/<your-sd-device>
-
-*** WARNING! This will destroy all the card content. Use with care! ***
-
-For details about the medium image layout, see the definition in
-board/freescale/common/imx/genimage.cfg.template_imx8.
-
-Boot the i.MX8DXL WEVK board
-============================
-
-To boot your newly created system:
- insert the SD card in the SD slot of the board;
- Configure the boot switch as follows:
-SW1:	ON	ON	OFF	OFF
- put a micro USB cable into the Debug USB Port and connect using a terminal
-  emulator at 115200 bps, 8n1;
- power on the board.
-
-Enjoy!
@@ -1,3 +0,0 @@
-# Use the upstream devicetree name for EVK board
-# Revert https://github.com/nxp-imx/uboot-imx/commit/a60e787a6e35b9c14c391e03d41468e4ad63d598
-CONFIG_DEFAULT_FDT_FILE="imx8mp-evk.dtb"
@@ -1,40 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"uImage",
-			"imxrt1050-evk.dtb",
-		}
-	}
-
-	size = 8M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition SPL {
-		in-partition-table = "no"
-		image = "SPL"
-		offset = 1K
-		size = 127K
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot.img"
-		offset = 128K
-		size = 512K
-	}
-
-	partition boot {
-		partition-type = 0xc
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
@@ -1,30 +0,0 @@
-NXP i.MXRT1050 EVK board
------------------------
-
-i.MX RT1050 are NXP's crossover MCUs. They combine the high performance and high
-level of integration of an applications processors with the ease-of-use and
-real-time functionality of a microcontroller. The i.MX RT1050 MCU runs on the Arm
-Cortex-M7 core at 600 MHz.
-https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/i-mx-rt1050-evaluation-kit:MIMXRT1050-EVK
-
-To build a minimal support for this board:
-
-$ make imxrt1050-evk_defconfig
-$ make
-
-Buildroot prepares a bootable "sdcard.img" image in the output/images/
-directory, ready to be flashed into the SD card:
-
-$ dd if=output/images/sdcard.img of=/dev/sdX
-Where 'sdX' is the device node of the uSD.
-
-Jumper settings:
-
-   SW7: 1 0 1 0
-
-Where 0 means bottom position and 1 means top position (from the
-switch label numbers reference).
-
-Connect the USB cable between the EVK and the PC for the console.
-
-Insert the micro SD card in the board, power it up and U-Boot messages should come up.
@@ -1,2 +0,0 @@
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="setenv bootargs console=ttyLP0 root=/dev/mmcblk0p2 rw earlycon rootwait;load mmc 0:1 0x80800000 imxrt1050-evk.dtb;load mmc 0:1 0x80000000 uImage;bootm 0x80000000 - 0x80800000"
@@ -1,29 +0,0 @@
-image sdcard.img {
-	hdimage {
-	}
-
-	partition fsbl {
-		offset = 4K
-		in-partition-table = "no"
-		image = "bl2_sd.pbl"
-	}
-
-	partition ssbl {
-		offset = 1M
-		in-partition-table = "no"
-		image = "fip.bin"
-	}
-
-	partition fman {
-		offset = 9M
-		in-partition-table = "no"
-		image = "fsl_fman_ucode_ls1046_r1.0_106_4_18.bin"
-	}
-
-	partition rootfs {
-		offset = 16M
-		partition-type = 0x83
-		bootable = "true"
-		image = "rootfs.ext4"
-	}
-}
@@ -1,90 +0,0 @@
-**************
-NXP LS1046A-FRWY
-**************
-
-This file documents the Buildroot support for the LS1046A Freeway Board.
-
-for more details about the board and the QorIQ Layerscape SoC, see the following pages:
-  - https://www.nxp.com/design/software/qoriq-developer-resources/ls1046a-freeway-board:FRWY-LS1046A
-  - https://www.nxp.com/FRWY-LS1046A
-  - https://www.nxp.com/docs/en/quick-reference-guide/FRWY-LS1046AGSG.pdf
-
-for the software NXP LSDK (Layerscape Software Development Kit), see
-  - https://www.nxp.com/docs/en/user-guide/LSDKUG_Rev21.08.pdf
-
-the components from NXP are:
-  - rcw, LSDK 21.08
-  - atf (fork), LSDK 21.08
-  - uboot (fork), LSDK 21.08
-  - qoriq-fm-ucode (blob), LSDK 21.08
-  - linux (fork), LSDK 21.08
-
-Build
-=====
-
-First, configure Buildroot for the LS1046A-FRWY board:
-
-  make ls1046a-frwy_defconfig
-
-Build all components:
-
-  make
-
-You will find in output/images/ the following files:
-  - bl2_sd.pbl
-  - fip.bin
-  - fsl_fman_ucode_ls1046_r1.0_106_4_18.bin
-  - fsl_fman_ucode_ls1046_r1.0_108_4_9.bin
-  - fsl-ls1046a-frwy.dtb
-  - fsl-ls1046a-frwy-sdk.dtb
-  - Image
-  - PBL.bin
-  - rootfs.ext2
-  - rootfs.ext4
-  - sdcard.img
-  - u-boot.bin
-
-Create a bootable SD card
-=========================
-
-To determine the device associated to the SD card have a look in the
-/proc/partitions file:
-
-  cat /proc/partitions
-
-Buildroot prepares a bootable "sdcard.img" image in the output/images/
-directory, ready to be dumped on a SD card. Launch the following
-command as root:
-
-  dd if=output/images/sdcard.img of=/dev/sdX
-
-*** WARNING! This will destroy all the card content. Use with care! ***
-
-For details about the medium image layout, see the definition in
-board/freescale/ls1046a-frwy/genimage.cfg.
-
-Boot the LS1046A-FRWY board
-=========================
-
-To boot your newly created system:
- insert the SD card in the SD slot of the board;
- Configure the switches SW1[1:9] = 0_0100_0000 (select SD Card boot option)
- put a Micro-USB cable into UART1 Port and connect using a terminal emulator
-  at 115200 bps, 8n1. Or remove the jumper on J72, connect a USB to TTL cable
-  to J73, and connect using a terminal emualtor at 115200 bps, 8n1.
- power on the board.
-
-The front panel Ethernet connectors are off at boot, to bring them up run the
-following commands.
-
-1G PORT1
-  ip link set eth1 up
-
-1G PORT2
-  ip link set eth2 up
-
-1G PORT3
-  ip link set eth0 up
-
-1G PORT4
-  ip link set eth3 up
@@ -1,4 +0,0 @@
-label ls1046afrwy-buildroot
-  kernel /boot/Image
-  devicetree /boot/fsl-ls1046a-frwy-sdk.dtb
-  append console=ttyS0,115200 root=/dev/mmcblk0p1 earlycon=uart8250,mmio,0x21c0500 rootwait
@@ -1,38 +0,0 @@
-# Minimal SD card image for the ICnova A20 SomPi on ADB4006
-# Based in the Cubieboard2 genimage.cfg
-
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"sun7i-a20-icnova-a20-adb4006.dtb",
-			"boot.scr"
-		}
-	}
-
-	size = 10M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot-sunxi-with-spl.bin"
-		offset = 8K
-		size = 1016K # 1MB - 8KB
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}
@@ -1 +0,0 @@
-CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-// Copyright (C) 2023 In-Circuit GmbH
-
-/dts-v1/;
-
-#include "sun7i-a20-icnova-a20.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	model = "In-Circuit ICnova A20 ADB4006";
-	compatible = "incircuit,icnova-a20-adb4006", "incircuit,icnova-a20",
-		     "allwinner,sun7i-a20";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	hdmi-connector {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con_in: endpoint {
-				remote-endpoint = <&hdmi_out_con>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-0 {
-			function = LED_FUNCTION_POWER;
-			color = <LED_COLOR_ID_YELLOW>;
-			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */
-			default-state = "on";
-		};
-
-		led-1 {
-			function = LED_FUNCTION_HEARTBEAT;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&ahci {
-	target-supply = <&reg_ahci_5v>;
-	status = "okay";
-};
-
-&codec {
-	status = "okay";
-};
-
-&de {
-	status = "okay";
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-&hdmi_out {
-	hdmi_out_con: endpoint {
-		remote-endpoint = <&hdmi_con_in>;
-	};
-};
-
-&mmc0 {
-	vmmc-supply = <&reg_vcc3v3>;
-	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
-	status = "okay";
-};
-
-&ohci0 {
-	status = "okay";
-};
-
-&ohci1 {
-	status = "okay";
-};
-
-&otg_sram {
-	status = "okay";
-};
-
-&reg_ahci_5v {
-	status = "okay";
-};
-
-&ac_power_supply {
-	status = "okay";
-};
-
-&reg_usb1_vbus {
-	status = "okay";
-};
-
-&reg_usb2_vbus {
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pb_pins>;
-	status = "okay";
-};
-
-&usb_otg {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usbphy {
-	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
-	usb1_vbus-supply = <&reg_usb1_vbus>;
-	usb2_vbus-supply = <&reg_usb2_vbus>;
-	status = "okay";
-};
@@ -1,20 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-icnova-a20-adb4006"
-CONFIG_SPL=y
-CONFIG_MACH_SUN7I=y
-CONFIG_DRAM_CLK=384
-CONFIG_AHCI=y
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SYS_I2C_MVTWSI=y
-CONFIG_SYS_I2C_SLAVE=0x7f
-CONFIG_SYS_I2C_SPEED=400000
-CONFIG_ETH_DESIGNWARE=y
-CONFIG_MII=y
-CONFIG_SUN7I_GMAC=y
-CONFIG_AXP_ALDO4_VOLT=2800
-CONFIG_SCSI=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-// Copyright (C) 2023 In-Circuit GmbH
-
-#include "sun7i-a20.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-&cpu0 {
-	cpu-supply = <&reg_dcdc2>;
-};
-
-&gmac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_mii_pins>;
-	phy-handle = <&phy1>;
-	phy-mode = "mii";
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	axp209: pmic@34 {
-		reg = <0x34>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&gmac_mdio {
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-#include "axp209.dtsi"
-
-&reg_dcdc2 {
-	regulator-always-on;
-	regulator-min-microvolt = <1000000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-cpu";
-};
-
-&reg_dcdc3 {
-	regulator-always-on;
-	regulator-min-microvolt = <1000000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-int-dll";
-};
-
-&reg_ldo1 {
-	regulator-name = "vdd-rtc";
-};
-
-&reg_ldo2 {
-	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "avcc";
-};
@@ -154,9 +154,9 @@ CONFIG_TUN=y
 # CONFIG_NET_VENDOR_SILAN is not set
 # CONFIG_NET_VENDOR_SIS is not set
 # CONFIG_NET_VENDOR_SMSC is not set
-CONFIG_STMMAC_ETH=y
+CONFIG_STMMAC_ETH=m
 # CONFIG_STMMAC_PLATFORM is not set
-CONFIG_STMMAC_PCI=y
+CONFIG_STMMAC_PCI=m
 # CONFIG_NET_VENDOR_SUN is not set
 # CONFIG_NET_VENDOR_TEHUTI is not set
 # CONFIG_NET_VENDOR_TI is not set
@@ -306,6 +306,3 @@ CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_VIRTUALIZATION is not set
 CONFIG_CRC_T10DIF=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_IP_PNP=y
@@ -1,5 +0,0 @@
-default buildroot
-label buildroot
-   kernel /Image
-   devicetree /meson-g12b-a311d-khadas-vim3.dtb
-append root=/dev/mmcblk0p2 rootwait console=ttyAML0,115200
@@ -1,33 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"Image",
-			"meson-g12b-a311d-khadas-vim3.dtb",
-			"extlinux"
-		}
-
-		label = "boot"
-	}
-
-	size = 64M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image="boot.vfat"
-		size = 64M
-		offset = 2M
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext2"
-		size = 128M
-		offset = 0
-	}
-}
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname "$0")"
-
-install -m 0644 -D "$BOARD_DIR"/extlinux.conf "$BINARIES_DIR"/extlinux/extlinux.conf
@@ -1,23 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname "$0")"
-
-support/scripts/genimage.sh -c "${BOARD_DIR}/genimage.cfg"
-
-AMLOGIC_DIR=${BINARIES_DIR}/amlogic-boot-fip
-FIP_DIR=${BINARIES_DIR}/fip
-
-mkdir -p "${FIP_DIR}"
-
-(cd "${AMLOGIC_DIR}" && \
-	./build-fip.sh khadas-vim3 \
-	"${BINARIES_DIR}"/u-boot.bin \
-	"${FIP_DIR}")
-
-dd if="${FIP_DIR}"/u-boot.bin.sd.bin \
-   of="${BINARIES_DIR}"/sdcard.img \
-   conv=fsync,notrunc bs=1 count=444
-
-dd if="${FIP_DIR}"/u-boot.bin.sd.bin \
-   of="${BINARIES_DIR}"/sdcard.img \
-   conv=fsync,notrunc bs=512 skip=1 seek=1
@@ -1,71 +0,0 @@
-Khadas VIM3
-
-Description
-===========
-
-This configuration builds a complete image for the Khadas VIM3 to be flashed
-on an SD-card.
-
-How to build it
-===============
-
-Select the default configuration for the target:
-$ make khadas_vim3_defconfig
-
-Optional: modify the configuration:
-$ make menuconfig
-
-Build:
-$ make
-
-Result of the build
-===================
-output/images/
-+-- amlogic-boot-fip
-+   +-- build-fip.sh
-+   +-- g12a.inc
-+   `-- khadas-vim3
-+       +-- acs.bin
-+       +-- acs_tool.py
-+       +-- aml_ddr.fw
-+       +-- aml_encrypt_g12b
-+       +-- bl2.bin
-+       +-- bl301.bin
-+       +-- bl30.bin
-+       +-- bl31.bin
-+       +-- bl31.img
-+       +-- blx_fix.sh
-+       +-- ddr3_1d.fw
-+       +-- ddr4_1d.fw
-+       +-- ddr4_2d.fw
-+       +-- diag_lpddr4.fw
-+       +-- lpddr3_1d.fw
-+       +-- lpddr4_1d.fw
-+       +-- lpddr4_2d.fw
-+       +-- Makefile
-+       `-- piei.fw
-+-- boot.vfat
-+-- extlinux
-+   `-- extlinux.conf
-+-- fip
-+   +-- u-boot.bin
-+   +-- u-boot.bin.sd.bin
-+   +-- u-boot.bin.usb.bl2
-+   `-- u-boot.bin.usb.tpl
-+-- Image
-+-- meson-g12b-a311d-khadas-vim3.dtb
-+-- rootfs.ext2
-+-- rootfs.ext4 -> rootfs.ext2
-+-- rootfs.tar
-+-- sdcard.img
-`-- u-boot.bin
-
-The post-image script uses the files in the amlogic-boot-fip folder to sign
-the bootloader image before integrating it into the sdcard image.
-
-To copy the image file to the sdcard use dd:
-$ dd if=output/images/sdcard.img of=/dev/sdX
-
-Tested hardware
-===============
-Khadas vim3 (rev. 14)
@@ -10,7 +10,7 @@ How to build it
 Configure Buildroot
 -------------------

-  $ make sipeed_licheepi_zero_defconfig
+  $ make licheepi_zero_defconfig

 Build the rootfs
 ----------------
@@ -1,62 +0,0 @@
-Microchip PolarFire SoC Icicle Kit
-==================================
-
-This file describes how to use the pre-defined Buildroot
-configuration for Microchip's PolarFire SoC Icicle Kit.
-
-Further information about the PolarFire SoC Icicle Kit can be found
-at https://github.com/polarfire-soc/polarfire-soc-documentation
-
-Building
-========
-
-Configure Buildroot using the default board configuration:
-
-  '$ make microchip_mpfs_icicle_defconfig'
-
-Customise the build as necessary:
-
-  '$ make menuconfig'
-
-Start the build:
-
-  '$ make'
-
-Result of the build
-===================
-
-Once the build has finished you will have the following files:
-
-    output/images/
-    +-- boot.scr
-    +-- boot.vfat
-    +-- Image
-    +-- mpfs_icicle.itb
-    +-- mpfs_icicle.its
-    +-- mpfs-icicle-kit.dtb
-    +-- payload.bin
-    +-- rootfs.ext2
-    +-- rootfs.ext4
-    +-- rootfs.tar
-    +-- sdcard.img
-    +-- u-boot.bin
-
-
-Creating a bootable SD card with genimage
-=========================================
-
-By default Buildroot builds a SD card image for you. The first partition
-of this image contains a U-Boot binary, embedded in a Hart Software
-Services (HSS) payload. The second partition contains a FAT filesystem
-with a U-Boot env and an ITB file containing the kernel and the device
-tree. The third partition contains the file system. This image can be
-written directly to the eMMC or an SD card. All you need to do is dd the
-image to the eMMC or your SD card, which can be done with the following
-command on your development host:
-
-  '$ sudo dd if=output/images/sdcard.img of=/dev/sdb bs=1M'
-
-For instructions on how to transfer the image to the eMMC/SD, please refer to
-the "Programming the Linux image" section of our guide on updating
-PolarFire SoC dev kits:
-https://github.com/polarfire-soc/polarfire-soc-documentation/blob/master/reference-designs-fpga-and-development-kits/updating-mpfs-kit.md.
@@ -1,28 +0,0 @@
-#
-# HSS Payload Generator - buildroot configuration file
-#
-
-# First, we can optionally set a name for our image, otherwise one will be created dynamically
-set-name: 'PolarFire-SoC-HSS::U-Boot'
-
-#
-# Next, we'll define the entry point addresses for each hart, as follows:
-#
-hart-entry-points: {u54_1: '0x80200000', u54_2: '0x80200000', u54_3: '0x80200000', u54_4: '0x80200000'}
-#
-# Finally, we'll define a payloads (source binary file) that will be placed at certain regions in memory
-# The payload section is defined with the keyword payloads, and then a number of individual
-# payload descriptors.
-#
-# Each payload has a name (path to its ELF/bin file), an owner-hart, and optionally 1-3 secondary-harts.
-#
-# Additionally, it has a privilege mode in which it will start execution.
-#  * Valid privilege modes are PRV_M, PRV_S and PRV_U.
-#
-#
-# In this case, the only payload is the u-boot s-mode binary.
-#
-# Case only matters for the ELF path names, not the keywords.
-#
-payloads:
-  u-boot.bin: {exec-addr: '0x80200000', owner-hart: u54_1, secondary-hart: u54_2, secondary-hart: u54_3, secondary-hart: u54_4, priv-mode: prv_s}
@@ -1,34 +0,0 @@
-# Image for eMMC or SDCard boot on the Microchip PolarFire SOC Icicle Board
-#
-image boot.vfat {
-	vfat {
-		files = {
-			 "mpfs_icicle.itb",
-		}
-
-		file boot.scr {
-			image = "boot.scr"
-		}
-	}
-	size = 60M
-}
-
-image sdcard.img {
-	hdimage {
-		gpt = true
-	}
-
-	partition uboot {
-		partition-type-uuid = 21686148-6449-6E6F-744E-656564454649
-		image = "payload.bin"
-	}
-
-	partition kernel {
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition root {
-		image = "rootfs.ext4"
-	}
-}
@@ -1 +0,0 @@
-CONFIG_POLARFIRE_SOC_DMA_NONCOHERENT=y
@@ -1,53 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Flattened Image Tree file for Icicle Kit
- *
- */
-
-/dts-v1/;
-
-/ {
-	description = "U-Boot fitImage for the MPFS";
-	address-cells = <1>;
-
-		images {
-			kernel {
-				description = "Linux kernel";
-				data = /incbin/("./Image");
-				type = "kernel";
-				arch = "riscv";
-				os = "linux";
-				compression = "none";
-				load = <0x80200000>;
-				entry = <0x80200000>;
-				hash-1 {
-					algo = "sha256";
-				};
-			};
-			base_fdt {
-				description = "Flattened Device Tree blob";
-				data = /incbin/("./mpfs-icicle-kit.dtb");
-				type = "flat_dt";
-				arch = "riscv";
-				compression = "none";
-				load = <0x8a000000>;
-				hash-1 {
-					algo = "sha256";
-				};
-			};
-		};
-
-		configurations {
-			default = "kernel_dtb";
-			kernel_dtb {
-				description = "1 Linux kernel, FDT blob";
-				kernel = "kernel";
-				fdt = "base_fdt";
-			};
-
-			base_dtb {
-				description = "Base FDT blob for MPFS Icicle board";
-				fdt = "base_fdt";
-			};
-		};
-};
@@ -1,13 +0,0 @@
-#!/bin/bash
-set -e
-
-HSS_PAYLOAD_GENERATOR="${HOST_DIR}"/bin/hss-payload-generator
-MKIMAGE="${HOST_DIR}"/bin/mkimage
-BOARD_DIR="$(pwd)"/"${0%/*}"
-
-pushd "${BINARIES_DIR}"
-"${HSS_PAYLOAD_GENERATOR}" -c "${BOARD_DIR}"/config.yaml payload.bin
-cp "${BOARD_DIR}"/mpfs_icicle.its "${BINARIES_DIR}"/mpfs_icicle.its
-"${MKIMAGE}" -f mpfs_icicle.its mpfs_icicle.itb
-popd
-support/scripts/genimage.sh -c "${BOARD_DIR}"/genimage.cfg
@@ -1,16 +0,0 @@
-# this assumes ${scriptaddr} is already set!!
-
-# Try to boot a fitImage from eMMC/SD
-
-setenv fdt_high 0xffffffffffffffff
-setenv initrd_high 0xffffffffffffffff
-
-load mmc 0:${distro_bootpart} ${scriptaddr} mpfs_icicle.itb;
-bootm start ${scriptaddr}#kernel_dtb;
-bootm loados ${scriptaddr};
-# Try to load a ramdisk if available inside fitImage
-bootm ramdisk;
-bootm prep;
-fdt set /soc/ethernet@20112000 mac-address ${icicle_mac_addr0};
-fdt set /soc/ethernet@20110000 mac-address ${icicle_mac_addr1};
-bootm go;
@@ -1,3 +0,0 @@
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="root=/dev/mmcblk0p3 rootwait uio_pdrv_genirq.of_id=generic-uio"
-CONFIG_MPFS_PRIORITISE_QSPI_BOOT=n
@@ -1,37 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Orangepi PC2. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-Orangepi PC2 link:
-http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-PC-2.html
-
-Sunxi Wiki link:
-https://linux-sunxi.org/Xunlong_Orange_Pi_PC_2
-
-This configuration uses U-Boot mainline and kernel mainline.
-
-How to build
-============
-
-    $ make orangepi_pc2_defconfig
-    $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
-  $ sudo sync
-
-Insert the micro SDcard in your Orangepi PC2 and power it up. The console
-is on the serial line, 115200 8N1.
@@ -1 +0,0 @@
-CONFIG_MFD_AC200=y
@@ -1,34 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Orangepi Zero3. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-Orangepi Zero3 link:
-http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-3.html
-
-This configuration uses Orangepi's fork of U-Boot and Linux kernel.
-
-How to build
-============
-
-    $ make orangepi_zero3_defconfig
-    $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
-  $ sudo sync
-
-Insert the micro SDcard in your Orangepi Zero3 and power it up. The console
-is on the serial line, 115200 8N1.
@@ -1,4 +0,0 @@
-label buildroot
-  kernel /zImage
-  devicetree /sun8i-s3-pinecube.dtb
-  append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait rw
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname "$0")"
-
-install -m 0644 -D "$BOARD_DIR"/extlinux.conf "$BINARIES_DIR"/extlinux/extlinux.conf
@@ -1,31 +0,0 @@
-Intro
-=====
-
-This directory contains a Buildroot configuration for building a
-Pine64 PineCube.
-
-Board homepage: https://www.pine64.org/cube/
-Board wiki:     https://wiki.pine64.org/wiki/PineCube
-
-How to build it
-===============
-
-  $ make pine64_pinecube_defconfig
-  $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
-  $ sudo sync
-
-Insert the micro SDcard in your PineCube and power it up. The console
-is on the serial port 2, 115200 8N1 (check Wiki for board pinout).
@@ -1,4 +1,4 @@
 label RK3399_ROCKPRO64 linux
  kernel /Image
  devicetree /rk3399-rockpro64.dtb
-  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p4 rw rootwait
+  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk0p4 rw rootwait
@@ -33,7 +33,7 @@ Run the emulation with:
      -device virtio-net-device,netdev=eth0 \
      -device virtio-rng-device,rng=rng0 \
      -drive file=output/images/disk.img,if=none,format=raw,id=hd0 \
-      -m 2048 \
+      -m 1024 \
      -netdev user,id=eth0 \
      -no-acpi \
      -nographic \
@@ -72,7 +72,7 @@ Then run the OS installer iso image on emulation with:
      -device virtio-rng-device,rng=rng0 \
      -drive file=<iso>,if=none,format=raw,readonly=on,id=hd0 \
      -drive file=disk.qcow2,if=none,id=hd1 \
-      -m 2048 \
+      -m 1024 \
      -netdev user,id=eth0 \
      -no-acpi \
      -nographic \
@@ -100,4 +100,4 @@ Firmware update is currently not supported.
 [1]: https://github.com/ARM-software/ebbr
 [2]: https://developer.arm.com/Architectures/Arm%20SystemReady%20IR
 [3]: https://github.com/ARM-software/arm-systemready/tree/main/IR/prebuilt_images
-[4]: https://developer.arm.com/documentation/DUI1101/latest/
+[4]: https://developer.arm.com/documentation/DUI1101/1-1/?lang=en
@@ -68,4 +68,4 @@ Firmware update is currently not supported.
 [1]: https://github.com/ARM-software/ebbr
 [2]: https://developer.arm.com/Architectures/Arm%20SystemReady%20IR
 [3]: https://github.com/ARM-software/arm-systemready/tree/main/IR/prebuilt_images
-[4]: https://developer.arm.com/documentation/DUI1101/latest/
+[4]: https://developer.arm.com/documentation/DUI1101/1-1/?lang=en
@@ -62,7 +62,7 @@ consoles over telnet connections:
 	-serial telnet:127.0.0.1:1235,server \
 	-serial telnet:127.0.0.1:1236,server \
 	-netdev user,id=vmnic -device virtio-net-device,netdev=vmnic \
-	-semihosting-config enable=on,target=native \
+	-semihosting-config enable,target=native \
 	-bios flash.bin

 QEMU is now waiting for the telnet connection. From another shell, open a
@@ -91,7 +91,7 @@ From a first shell:
 	-smp 1 -s -m 1024 -d unimp \
 	-serial stdio \
 	-netdev user,id=vmnic -device virtio-net-device,netdev=vmnic \
-	-semihosting-config enable=on,target=native \
+	-semihosting-config enable,target=native \
 	-bios flash.bin \
 	-S

@@ -123,7 +123,7 @@ Emulation has started, TF-A has loaded OP-TEE and U-boot images in memory and
 has booted OP-TEE. Emulation stopped at OP-TEE core entry.

 Note: QEMU hosts a GDB service listening to TCP port 1234, as set through
-qemu-system-arm command line option -S.
+qemu-system-arm command line option -s.

 Note: To build the GDB server, the following extra options have to be added to
 the Buildroot configuration:
@@ -3,3 +3,5 @@ Run the emulation with:
 qemu-system-or1k -kernel output/images/vmlinux -nographic # qemu_or1k_defconfig

 The login prompt will appear in the terminal that started Qemu.
+
+Ethernet support is not working, yet.
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  a5eca7b8f929a1918125e2e4fbd7ab4ea5b3910b5ae4547e81c794b47373ffb5  linux-52f51a2b5ba178f331af62260d2da86d7472c14b-br1.tar.gz
@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  12e921b466ae731cdbc355e6832b7f22bc90b01aeceef9886f98aaba7b394300  u-boot-2023.07.tar.bz2
@@ -26,4 +26,4 @@ gpu_mem_1024=100
 dtoverlay=miniuart-bt

 # enable autoprobing of Bluetooth driver without need of hciattach/btattach
-dtparam=krnbt=on
+dtoverlay=krnbt=on
@@ -26,4 +26,4 @@ gpu_mem_1024=100
 dtoverlay=miniuart-bt

 # enable autoprobing of Bluetooth driver without need of hciattach/btattach
-dtparam=krnbt=on
+dtoverlay=krnbt=on
@@ -26,7 +26,7 @@ gpu_mem_1024=100
 dtoverlay=miniuart-bt

 # enable autoprobing of Bluetooth driver without need of hciattach/btattach
-dtparam=krnbt=on
+dtoverlay=krnbt=on

 # enable 64bits support
 arm_64bit=1
@@ -26,4 +26,4 @@ gpu_mem_1024=100
 dtoverlay=miniuart-bt

 # enable autoprobing of Bluetooth driver without need of hciattach/btattach
-dtparam=krnbt=on
+dtoverlay=krnbt=on
@@ -26,7 +26,11 @@ gpu_mem_1024=100
 dtoverlay=miniuart-bt

 # enable autoprobing of Bluetooth driver without need of hciattach/btattach
-dtparam=krnbt=on
+dtoverlay=krnbt=on
+
+dtoverlay=vc4-kms-v3d-pi4
+dtoverlay=imx219
+#dtoverlay=ov5647

 # enable 64bits support
 arm_64bit=1
@@ -26,4 +26,4 @@ gpu_mem_1024=100
 dtoverlay=miniuart-bt

 # enable autoprobing of Bluetooth driver without need of hciattach/btattach
-dtparam=krnbt=on
+dtoverlay=krnbt=on
@@ -0,0 +1,33 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"bcm2708-rpi-b.dtb",
+			"bcm2708-rpi-b-plus.dtb",
+			"bcm2708-rpi-cm.dtb",
+			"rpi-firmware/bootcode.bin",
+			"rpi-firmware/cmdline.txt",
+			"rpi-firmware/config.txt",
+			"rpi-firmware/fixup.dat",
+			"rpi-firmware/start.elf",
+			"zImage"
+		}
+	}
+
+	size = 32M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}
@@ -0,0 +1,32 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"bcm2708-rpi-zero.dtb",
+			"rpi-firmware/bootcode.bin",
+			"rpi-firmware/cmdline.txt",
+			"rpi-firmware/config.txt",
+			"rpi-firmware/fixup.dat",
+			"rpi-firmware/start.elf",
+			"rpi-firmware/overlays",
+			"zImage"
+		}
+	}
+
+	size = 32M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}
@@ -0,0 +1,32 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"bcm2708-rpi-zero-w.dtb",
+			"rpi-firmware/bootcode.bin",
+			"rpi-firmware/cmdline.txt",
+			"rpi-firmware/config.txt",
+			"rpi-firmware/fixup.dat",
+			"rpi-firmware/start.elf",
+			"rpi-firmware/overlays",
+			"zImage"
+		}
+	}
+
+	size = 32M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}
@@ -0,0 +1,32 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"bcm2709-rpi-2-b.dtb",
+			"rpi-firmware/bootcode.bin",
+			"rpi-firmware/cmdline.txt",
+			"rpi-firmware/config.txt",
+			"rpi-firmware/fixup.dat",
+			"rpi-firmware/start.elf",
+			"rpi-firmware/overlays",
+			"zImage"
+		}
+	}
+
+	size = 32M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}
@@ -0,0 +1,34 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"bcm2710-rpi-3-b.dtb",
+			"bcm2710-rpi-3-b-plus.dtb",
+			"bcm2837-rpi-3-b.dtb",
+			"rpi-firmware/bootcode.bin",
+			"rpi-firmware/cmdline.txt",
+			"rpi-firmware/config.txt",
+			"rpi-firmware/fixup.dat",
+			"rpi-firmware/start.elf",
+			"rpi-firmware/overlays",
+			"Image"
+		}
+	}
+
+	size = 32M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}
@@ -0,0 +1,34 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"bcm2710-rpi-3-b.dtb",
+			"bcm2710-rpi-3-b-plus.dtb",
+			"bcm2710-rpi-cm3.dtb",
+			"rpi-firmware/bootcode.bin",
+			"rpi-firmware/cmdline.txt",
+			"rpi-firmware/config.txt",
+			"rpi-firmware/fixup.dat",
+			"rpi-firmware/start.elf",
+			"rpi-firmware/overlays",
+			"zImage"
+		}
+	}
+
+	size = 32M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}
@@ -1,7 +1,13 @@
 image boot.vfat {
 	vfat {
 		files = {
-#BOOT_FILES#
+			"bcm2711-rpi-4-b.dtb",
+			"rpi-firmware/cmdline.txt",
+			"rpi-firmware/config.txt",
+			"rpi-firmware/fixup4.dat",
+			"rpi-firmware/start4.elf",
+			"rpi-firmware/overlays",
+			"Image"
 		}
 	}

@@ -1,20 +1,24 @@
 image boot.vfat {
 	vfat {
 		files = {
-			"tiboot3.bin",
-			"tispl.bin",
-			"u-boot.img",
+			"bcm2711-rpi-4-b.dtb",
+			"rpi-firmware/cmdline.txt",
+			"rpi-firmware/config.txt",
+			"rpi-firmware/fixup4.dat",
+			"rpi-firmware/start4.elf",
+			"rpi-firmware/overlays",
+			"zImage"
 		}
 	}

-	size = 16M
+	size = 32M
 }

 image sdcard.img {
 	hdimage {
 	}

-	partition u-boot {
+	partition boot {
 		partition-type = 0xC
 		bootable = "true"
 		image = "boot.vfat"
@@ -1,26 +1,23 @@
 image boot.vfat {
 	vfat {
 		files = {
-			"zImage",
-			"sun8i-s3-pinecube.dtb",
-			"extlinux"
+			"bcm2711-rpi-cm4.dtb",
+			"rpi-firmware/cmdline.txt",
+			"rpi-firmware/config.txt",
+			"rpi-firmware/fixup4.dat",
+			"rpi-firmware/start4.elf",
+			"rpi-firmware/overlays",
+			"Image"
 		}
 	}

-	size = 8M
+	size = 32M
 }

 image sdcard.img {
 	hdimage {
 	}

-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot-sunxi-with-spl.bin"
-		offset = 8K
-		size = 504K # 512KB - 8KB
-	}
-
 	partition boot {
 		partition-type = 0xC
 		bootable = "true"
@@ -1,20 +1,24 @@
 image boot.vfat {
 	vfat {
 		files = {
-			"tiboot3.bin",
-			"tispl.bin",
-			"u-boot.img",
+			"bcm2711-rpi-cm4.dtb",
+			"rpi-firmware/cmdline.txt",
+			"rpi-firmware/config.txt",
+			"rpi-firmware/fixup4.dat",
+			"rpi-firmware/start4.elf",
+			"rpi-firmware/overlays",
+			"zImage"
 		}
 	}

-	size = 16M
+	size = 32M
 }

 image sdcard.img {
 	hdimage {
 	}

-	partition u-boot {
+	partition boot {
 		partition-type = 0xC
 		bootable = "true"
 		image = "boot.vfat"
@@ -0,0 +1,32 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"bcm2710-rpi-zero-2-w.dtb",
+			"rpi-firmware/bootcode.bin",
+			"rpi-firmware/cmdline.txt",
+			"rpi-firmware/config.txt",
+			"rpi-firmware/fixup.dat",
+			"rpi-firmware/start.elf",
+			"rpi-firmware/overlays",
+			"zImage"
+		}
+	}
+
+	size = 32M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}
@@ -7,23 +7,6 @@ BOARD_NAME="$(basename ${BOARD_DIR})"
 GENIMAGE_CFG="${BOARD_DIR}/genimage-${BOARD_NAME}.cfg"
 GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"

-# generate genimage from template if a board specific variant doesn't exists
-if [ ! -e "${GENIMAGE_CFG}" ]; then
-	GENIMAGE_CFG="${BINARIES_DIR}/genimage.cfg"
-	FILES=()
-
-	for i in "${BINARIES_DIR}"/*.dtb "${BINARIES_DIR}"/rpi-firmware/*; do
-		FILES+=( "${i#${BINARIES_DIR}/}" )
-	done
-
-	KERNEL=$(sed -n 's/^kernel=//p' "${BINARIES_DIR}/rpi-firmware/config.txt")
-	FILES+=( "${KERNEL}" )
-
-	BOOT_FILES=$(printf '\\t\\t\\t"%s",\\n' "${FILES[@]}")
-	sed "s|#BOOT_FILES#|${BOOT_FILES}|" "${BOARD_DIR}/genimage.cfg.in" \
-		> "${GENIMAGE_CFG}"
-fi
-
 # Pass an empty rootpath. genimage makes a full copy of the given rootpath to
 # ${GENIMAGE_TMP}/root so passing TARGET_DIR would be a waste of time and disk
 # space. We don't rely on genimage to build the rootfs image, just to insert a
@@ -17,8 +17,8 @@ How to build it
 Configure Buildroot
 -------------------

-There are several Raspberry Pi defconfig files in Buildroot, one for
-each major variant, which you should base your work on:
+There are two RaspberryPi defconfig files in Buildroot, one for each
+major variant, which you should base your work on:

 For models A, B, A+ or B+:

@@ -133,7 +133,7 @@ How to write to CM4 eMMC memory
 ===============================

 For CM4 modules without eMMC memory see above for booting from SD card,
-for CM4 modules with eMMC memory proceed as following:
+for CM4 moduels with eMMC memory proceed as following:

 - fit jumper on IO Board header J2 to disable eMMC boot
 - connect IO Board micro USB port (J11 USB slave) to your host linux system
@@ -17,7 +17,6 @@ image sdcard.img {

 	partition rootfs {
 		image = "rootfs.ext4"
-		offset = 4076K
 		partition-type-uuid = 0fc63daf-8483-4772-8e79-3d69d8477de4
 		bootable = true
 	}
@@ -113,20 +113,3 @@ Booting the SPI flash on the board

 Make sure that the all DIP switches are set to the off position for
 default boot mode (MSEL mode = 0110) to boot from SPI flash.
-
-Testing under QEMU
-==================
-
-The SD card image can be tested using QEMU:
-
-$ qemu-system-riscv64 -M sifive_u,msel=11 -smp 5 -m 8G \
-    -display none -serial stdio -nic user \
-    -bios output/images/u-boot-spl.bin \
-    -drive file=output/images/sdcard.img,if=sd
-
-The SPI flash image can be tested with a slightly different command:
-
-$ qemu-system-riscv64 -M sifive_u,msel=6 -smp 5 -m 8G \
-    -display none -serial stdio -nic user \
-    -bios output/images/u-boot-spl.bin \
-    -drive file=output/images/spi-nor.img,if=mtd
@@ -1,33 +0,0 @@
-flash w25q128 {
-	pebsize = 65536
-	numpebs = 256
-	minimum-io-unit-size = 1
-	sub-page-size = 1
-	vid-header-offset = 64
-}
-
-image flash.bin {
-	flash {}
-	flashtype = w25q128
-
-	partition uboot {
-		image = "u-boot-sunxi-with-spl.bin"
-		size = 512K
-	}
-
-	partition dtb {
-		image = "suniv-f1c100s-licheepi-nano.dtb"
-		size = 64K
-	}
-
-	partition zimage {
-		image = "zImage"
-		size = 5M
-	}
-
-	partition rootfs {
-		image = "rootfs.jffs2"
-		size = 0
-	}
-}
-
@@ -1,11 +0,0 @@
-# CONFIG_NET is not set
-# CONFIG_DRM is not set
-# CONFIG_CMA is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_UEVENT_HELPER=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_SPI_NOR=y
-# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_JFFS2_FS=y
@@ -1,84 +0,0 @@
-Intro
-=====
-
-This directory contains a buildroot configuration for building a
-LicheePi Nano image which can be flashed into the board.
-
-This frees the MMC port which can be used for an additional SD
-card of for a WiFi adapter.
-
-How to build it
-===============
-
-Configure Buildroot
-------------------
-
-  $ make sipeed_licheepi_nano_defconfig
-
-Build the rootfs
----------------
-
-Note: you will need to have access to the network, since Buildroot
-will download the packages' sources.
-
-You may now build your rootfs with:
-
-  $ make
-
-(This may take a while, consider getting yourself a coffee ;-) )
-
-Result of the build
-------------------
-
-After building, you should obtain this tree:
-
-    output/images/
-    +-- flash.bin
-    +-- rootfs.jffs2
-    +-- rootfs.tar
-    +-- suniv-f1c100s-licheepi-nano.dtb
-    +-- u-boot.bin
-    +-- u-boot-sunxi-with-spl.bin
-    `-- zImage
-
-How to flash
-============
-
-Once the build process is finished you will have an image called
-"flash.bin" in the output/images/ directory. It contains the
-bootloader, the device tree, the kernel and the root file system.
-
-The device can be flashed when it is in special mode called "FEL
-mode". There are multiple ways to enter this mode described here:
-https://linux-sunxi.org/FEL#Entering_FEL_mode
-
-One way is to write one file from sunxi-tools to a SD card with:
-
-  $ sudo dd if=./output/build/host-sunxi-tools-*/bin/fel-sdboot.sunxi of=/dev/sdX bs=1024 seek=8
-
-Once the SD card is burned, insert it into your LicheePi Nano board,
-and plug the USB cable. A new USB device should be visible with
-lsusb:
-
-  1f3a:efe8 Allwinner Technology sunxi SoC OTG connector in FEL/flashing mode
-
-The image can be flashed with:
-
-  $ sudo ./output/host/bin/sunxi-fel -p spiflash-write 0 output/images/flash.bin
-
-Once this completes, remove the SD card and power the board. Your
-new system should come up now and start a console on the UART0
-serial port.
-
-Note
-====
-
-Some standard kernel features are disabled using the fragment in
-order to reduce the size. They can be enabled again if other
-features are disabled instead.
-
-For U-Boot, the upstream repository is preferred and the system
-boots, but loading the image from the flash takes a long time. It
-is much faster when using the branch "licheepi-nano-v2020.01" of
-this fork:
-https://github.com/florpor/u-boot
@@ -1,3 +0,0 @@
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=tty0 console=ttyS0,115200 panic=5 rootwait root=/dev/mtdblock3 rw rootfstype=jffs2 mtdparts=spi0.0:512k(uboot)ro,64k(dtb),5M(kernel)ro,-(rootfs)"
-CONFIG_BOOTCOMMAND="sf probe 0 50000000; sf read 0x80C00000 0x80000 0x4000; sf read 0x80008000 0x90000 0x500000; bootz 0x80008000 - 0x80C00000"
@@ -1,4 +1,4 @@
-#!/bin/sh -eu
+#!/usr/bin/env bash

 #
 # atf_image extracts the ATF binary image from DTB_FILE_NAME that appears in
@@ -8,18 +8,22 @@
 #
 atf_image()
 {
-	ATF_VARIABLES="$(sed -n 's/^BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="\([\/a-zA-Z0-9_=. \-]*\)"$/\1/p' ${BR2_CONFIG})"
-	# make sure DTB_FILE_NAME is set
-	printf '%s\n' "${ATF_VARIABLES}" | grep -Eq 'DTB_FILE_NAME=[0-9A-Za-z_\-]*'
-	# extract the value
-	DTB_FILE_NAME="$(printf '%s\n' "${ATF_VARIABLES}" | sed 's/.*DTB_FILE_NAME=\([a-zA-Z0-9_\-]*\)\.dtb.*/\1/')"
-	echo "tf-a-${DTB_FILE_NAME}.stm32"
+	local ATF_VARIABLES="$(sed -n 's/^BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="\([\/a-zA-Z0-9_=. \-]*\)"$/\1/p' ${BR2_CONFIG})"
+
+	if grep -Eq "DTB_FILE_NAME=stm32mp157c-dk2.dtb" <<< ${ATF_VARIABLES}; then
+		echo "tf-a-stm32mp157c-dk2.stm32"
+	elif grep -Eq "DTB_FILE_NAME=stm32mp157a-dk1.dtb" <<< ${ATF_VARIABLES}; then
+                echo "tf-a-stm32mp157a-dk1.stm32"
+	elif grep -Eq "DTB_FILE_NAME=stm32mp157a-avenger96.dtb" <<< ${ATF_VARIABLES}; then
+                echo "tf-a-stm32mp157a-avenger96.stm32"
+	fi
 }

 main()
 {
-	ATFBIN="$(atf_image)"
-	GENIMAGE_CFG="$(mktemp --suffix genimage.cfg)"
+	local ATFBIN="$(atf_image)"
+	local GENIMAGE_CFG="$(mktemp --suffix genimage.cfg)"
+	local GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"

 	sed -e "s/%ATFBIN%/${ATFBIN}/" \
 		board/stmicroelectronics/common/stm32mp157/genimage.cfg.template > ${GENIMAGE_CFG}
@@ -1,43 +0,0 @@
-How to build it
-===============
-
-Configure build for the selected nSIM target. For instance, for
-ARC700 nSIM target use the following defauilt configuration:
-$ make snps_arc700_nsim_defconfig
-
-Optionally modify the configuration:
-$ make menuconfig
-
-Build:
-$ make
-
-How to use it
-=============
-
-Resulting image can be booted using ARC nSIM instruction set simulator.
-Free version of nSIM is available for download:
- https://www.synopsys.com/cgi-bin/dwarcnsim/req1.cgi
-It provides nsimdrv binary for Linux that can be used stand-alone
-or with GDB.
-
-To run ARC700 image use the following command:
-$ nsimdrv \
-	-prop=nsim_mem-dev=uart0,kind=dwuart,base=0xf0000000,irq=24 \
-	-prop=icache=32768,64,2,0 \
-	-prop=dcache=32768,64,4,0 \
-	-prop=nsim_isa_enable_timer_0=1 \
-	-prop=nsim_isa_enable_timer_1=1 \
-	-prop=nsim_isa_host_timer=1 \
-	-prop=nsim_mmu=3 \
-	-prop=nsim_isa_family=a700 \
-	-prop=nsim_isa_atomic_option=1 \
-	-prop=nsim_isa_dpfp=none \
-	-prop=nsim_isa_shift_option=2 \
-	-prop=nsim_isa_swap_option=1 \
-	-prop=nsim_isa_bitscan_option=1 \
-	-prop=nsim_isa_sat=1 \
-	-prop=nsim_isa_mpy32=1 \
-	-prop=isa_counters=1 \
-	-prop=nsim_isa_pct_counters=8 \
-	-prop=nsim_isa_pct_size=48 \
-	output/images/vmlinux
@@ -1,34 +0,0 @@
-Texas Instuments SK-AM62 Test and Development Board
-
-Description
-===========
-
-This configuration will build a complete image for the TI SK-AM62
-board: https://www.ti.com/tool/SK-AM62.
-
-How to Build
-============
-
-Select the default configuration for the target:
-
-$ make ti_am62x_sk_defconfig
-
-Optional: modify the configuration:
-
-$ make menuconfig
-
-Build:
-
-$ make
-
-To copy the resultimg output image file to an SD card use dd:
-
-$ dd if=output/images/sdcard.img of=/dev/sdX bs=1M
-
-How to Run
-==========
-
-Insert the SD card into the SK-AM62 board, and power it up through the
-USB Type-C connector. The system should come up. You can use a
-micro-USB cable to connect to the connector labeled UART to
-communicate with the board.
@@ -1,34 +0,0 @@
-Texas Instuments SK-AM64 Test and Development Board
-
-Description
-===========
-
-This configuration will build a complete image for the TI SK-AM64
-board: https://www.ti.com/tool/SK-AM64.
-
-How to Build
-============
-
-Select the default configuration for the target:
-
-$ make am64x_sk_defconfig
-
-Optional: modify the configuration:
-
-$ make menuconfig
-
-Build:
-
-$ make
-
-To copy the resultimg output image file to an SD card use dd:
-
-$ dd if=output/images/sdcard.img of=/dev/sdX bs=1M
-
-How to Run
-==========
-
-Insert the SD card into the SK-AM62 board, and power it up through the
-USB Type-C connector. The system should come up. You can use a
-micro-USB cable to connect to the connector labeled DEBUG CONSOLE to
-communicate with the board.
--- a/Show More
+++ b/Show More