libxcrypt has been added as a replacement for the libcrypt
implementation that was part of glibc, but dropped from glibc starting
from version 2.39.
However, libxcrypt was made available for all C libraries, and this is
unfortunately causing some problems as it can clash with the libcrypt
implementation provided by the C library.
In particular, linux-pam has been consistently failing with uclibc, in
BR2_PER_PACKAGE_DIRECTORIES=y builds, with the following build
failure:
opasswd.c: In function 'compare_password':
opasswd.c:133:27: error: invalid application of 'sizeof' to incomplete type 'struct crypt_data'
What happens is relatively tricky, but let's try to break it down:
- uclibc-ng install a stub libcrypt.a (no shared variant, as for
shared libraries, everything is in libc.so), and crypt.h
- libxcrypt installs libcrypt.so.* and crypt.h
So there is no "clash" on the library itself, but there is a clash on
the header file.
Since we're using BR2_PER_PACKAGE_DIRECTORIES=y, when building
linux-pam, we are creating the per-package STAGING_DIR by copying the
STAGING_DIR of linux-pam dependencies, i.e both the libxcrypt
STAGING_DIR and the uclibc-ng STAGING_DIR. But the latter ends up
being copied last, which means that at the end of the day, we have in
the per-package STAGING_DIR of linux-pam:
- The libcrypt.so from libxcrypt
- The crypt.h header from uclibc-ng
- The libcrypt.a from uclibc-ng
When the ./configure script of linux-pam tests whether the library has
crypt_r(), it concludes that yes it's available: and indeed
libcrypt.so from libxcrypt has it.
So it tries to use 'struct crypt_data' and 'crypt_r()', but those are
not supported in uClibc-ng, and so cannot be found in the <crypt.h>
header. So even if the ./configure script and the linux-pam code has
some logic to fallback to crypt() if crypt_r() isn't available, this
fallback doesn't trigger because the installed libcrypt.so does have
crypt_r().
Basically what happens is that uclibc-ng + libxcrypt is a combo that
violates a golden rule of our BR2_PER_PACKAGE_DIRECTORIES=y
implementation: packages shouldn't overwrite files from each other.
To avoid this situation, we make libxcrypt only installable on
glibc. This isn't a problem because as of today, BR2_PACKAGE_LIBXCRYPT
is always selected "if BR2_TOOLCHAIN_USES_GLIBC".
It should be noted though that the case of an older glibc (which still
had its own internal libcrypt) + libxcrypt continues to exist. It's
less likely to cause trouble though, as the libcrypt implementations
are much more similar.
Fixes:
http://autobuild.buildroot.net/results/560f66b0311d02dc884732221d6870ae3c38067c/
Note: we do not add a Config.in comment for this glibc dependency,
because libxcrypt really is a "replacement" library to fill in the
void left by libcrypt's removal from glibc. There isn't realy a point
showing "libxcrypt needs a toolchain w/ glibc", because with musl or
uclibc-ng, the libcrypt functionality is directly part of the C
library.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 5c0a91f729)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We are seeing build issues with linux-pam in the autobuilders such as:
md5_crypt.c: In function 'Goodcrypt_md5':
md5_crypt.c:145:13: error: implicit declaration of function 'asprintf'; did you mean 'vsprintf'? [-Wimplicit-function-declaration]
145 | if (asprintf(&passwd, "%s%.*s$%s", magic, sl, sp, buf) < 0)
| ^~~~~~~~
| vsprintf
This is due to the fact that <stdio.h> gets included without
_GNU_SOURCE being defined, and so the prototype of asprintf() is not
accessible, at least with uclibc-ng.
The _GNU_SOURCE definition is properly in linux-pam's config.h, but
config.h doesn't get properly included first everywhere. This issue
has been fixed upstream in the mean time, so we simply backport the
upstream patch.
Fixes:
http://autobuild.buildroot.net/results/49b190b3fbae3cdca4c7a08b3ab5100a937ede9e/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 001e777d50)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Buildroot commit
1f4b4ccde7 ("package/opensc: security
bump to version 0.26.0") bumped opensc from 0.24 to 0.26, and the
build started failing with:
pkcs11-tool.c:7854:45: warning: implicit declaration of function 'EVP_bf_cbc'; did you mean 'EVP_sm4_cbc'? [-Wimplicit-function-declaration]
on configurations that have BR2_PACKAGE_LIBOPENSSL_ENABLE_BLOWFISH
disabled (it is not explicitly selected by this package).
Our initial fix was to simply select
BR2_PACKAGE_LIBOPENSSL_ENABLE_BLOWFISH, but when investigating when
EVP_bf_cbc() started being used in OpenSC, we discovered it has been
in use for a while... but in code that kept being disabled from
version to version as it was broken (upstream bug
https://github.com/OpenSC/OpenSC/issues/1796), but it was apparently
forgotten to be disabled again for 0.26 (the issue is still
open). Therefore, we opted to continue disabling this known broken
part of the code, and submit an upstream PR for that
https://github.com/OpenSC/OpenSC/pull/3303, which ultimately will
clarify what is the right fix.
In the mean time, this allows to fix the build issue.
Fixes:
http://autobuild.buildroot.net/results/ca51b3e8e3ac83e2a69814caa84d9862385b956f/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 5d7ab604d2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 9c0c7846cd (support/dependencies: don't check for python
on the host), we no longer check for a host python interpreter installed
on the system.
Drop the comment in support/dependencies/check-host-python3.sh, as it is
now confusing.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 3722998a3d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit ed12e2fbed (package/libvirt: add lxc and qemu options)
introduced the definition of the 'qemu' user when the libvirt daemon
is enabled, but unconditionally uses that user in its permissions
table.
When enabling libvirt without its qemu support, for example with the
commands:
cat <<EOF >.config
BR2_aarch64=y
BR2_PACKAGE_LIBVIRT=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_TARGET_ROOTFS_EXT2=y
BR2_TOOLCHAIN_EXTERNAL=y
EOF
make olddefconfig
make
The build fails with output:
>>> Generating filesystem image rootfs.ext2
...
makedevs: unknown user name: qemu
Move the permissions needing the 'qemu' user under the same condition
the 'qemu' user is defined under. It means that a few permissions
needing root must also be moved, as they belong under a directory
needing the 'qemu' user. It also moves a few qemu-related permissions
introduced in that same commit. The list of qemu permissions is
reordered alphabetically (the others are left unchanged).
Of course, it also requires that the qemu-related directory and symlink
be moved under the same condition as well.
Reported-by: Alessandro <alex@0x65c.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Jared Bents <jared.bents@rockwellcollins.com>
[Julien: add the commands to reproduce the issue]
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit da9adec149)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is very common to use the output of get-developers to add cc: lines
in the commit log.
Add an option so that get-developers reports Cc: lines ready to be
pasted in a commit log. That new option behaves similarly to the
existing -e option: it only affects the output when parsing a patch.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Julien Olivain <ju.o@free.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 717f1fdaeb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The list of reported developers is not ordered: that may leave the
impression (when receiving a patch) that a Cc is more important than
another, by virtue of being earlier in the list.
Also, the ordering changes on every call.
Report the developers in an alphabetically order, so that there is no
confusion anymore, and so the ordering is reproducible across calls.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 3177ecd260)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is very common that get-developers be used with its stdin a pipe from
git-show:
git show |./utils-get-developers -
In this case, the '-' is superfluous: we can very easily deduce that the
user wants to read stdin as the patch.
So, if no other action was requested, and stdin is not a tty, use it as
the source of the patch, and thus '-' is then no longer required.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit d10d22221f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
parser.error() reports a nice error message, that also displays a short
reminder of the available options.
Adapt the test-suite accordingly: previously, the error string was an
exact string in the stdout list, while it now is a substring in one of
the strings in stderr. The exit code changes, too.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Julien Olivain <ju.o@free.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 35f381b93e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Offloading parser.parse_args() to a helper function does not bring much,
if at all; it even is restrictive: indeed, we can't use parser.error()
to report errors and thus have to resort to a canned print+return
sequence...
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit cdcb3f56e8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The variable <pkg>_LINUX_CONFIG_FIXUPS defined in the
cryptodev-linux... has no effect. Indeed, the variable is only named
CRYPTODEV_LINUX_CONFIG_FIXUPS.
But the variable name being <pkg>_LINUX_CONFIG_FIXUPS and the package
name being CRYPTODEV_LINUX, the correct variable name is
CRYPTODEV_LINUX_LINUX_CONFIG_FIXUPS.
Prior to this commit, a configuration with cryptodev-linux enabled
would result in:
$ make VARS=PACKAGES_LINUX_CONFIG_FIXUPS printvars
$
Aka, empty, while PACKAGES_LINUX_CONFIG_FIXUPS collects in
package/pkg-generic.mk the value of the <pkg>_LINUX_CONFIG_FIXUPS
variables from all enabled packages.
With this patch applied:
$ make VARS=PACKAGES_LINUX_CONFIG_FIXUPS printvars
PACKAGES_LINUX_CONFIG_FIXUPS= @if ! grep -q '^CONFIG_CRYPTO=[my]' /; then /usr/bin/sed -i -e '/^\(# \)\?CONFIG_CRYPTO\>/d' / && echo 'CONFIG_CRYPTO=y' >> /; fi
@if ! grep -q '^CONFIG_CRYPTO_USER_API_AEAD=[my]' /; then /usr/bin/sed -i -e '/^\(# \)\?CONFIG_CRYPTO_USER_API_AEAD\>/d' / && echo 'CONFIG_CRYPTO_USER_API_AEAD=y' >> /; fi
$
As one would expect.
Fixes: 4b12336d1f ("package/cryptodev-linux: needs CONFIG_CRYPTO_USER_API_AEAD")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 9114d48b31)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the bump of xxhash from 0.8.2 to 0.8.3 in Buildroot commit
4b8f2f3a5e, the host of host-php fails
when host-xxhash has been built before.
This is due to the fact that host-xxhash installs
HOST_DIR/include/xxhash.h, and the PHP code has an internal xxhash.h,
but due to the order of CFLAGS, the one from HOST_DIR/include/xxhash.h
gets included instead of the internal xxhash.h from PHP.
We initially tried to fix the order of CFLAGS, but that has proven to
be challenging within the complicated PHP build system. Then, we opted
for renaming the internal xxhash.h header of PHP, which we had
implemented and were about to submit upstream. But while rebasing this
fix on PHP's master, it turned out that PHP has an upstream commit
"Sync headers installation", merged for PHP 8.4.0, which has the side
effect of avoiding the issue. This commit moves xxhash.h into a
subfolder, so it gets included as #include "xxhash/xxhash.h" now,
which avoids the conflict with HOST_DIR/include/xxhash.h. Maybe not
the best fix, but it does fix the issue and it's upstream.
Since this patch is tweaking the PHP build system, we need to do the
equivalent of "autoreconf" but in the PHP world. It was already done
for the target package, we simply add the same logic for the host
package.
Fixes:
http://autobuild.buildroot.net/results/583c054a564f90b8c884565070c5e17b43b89674/
Cc: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 3a20dfb426)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
pixman fails to build with -Og or -O3 due to forced inlining
statements:
pixman-combine-float.c:370:5: error: inlining failed in call to 'always_inline' 'combine_soft_light_c': function not considered for inlining
The first occurence in the autobuilders is on May 12, 2024, but the
problem already existed before as we haven't updated pixman in a long
time. Therefore, the issue started occurring because we started
testing more random configurations.
Fixes:
https://autobuild.buildroot.org/results/2f3df7961b3181d9eef79893439ae7ebbe4415ad/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 696de595e0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Setting CONFIG_VIDEO_DEV is no sufficient as drivers/media/Kconfig has
some very convoluted logic to hide some options behind a
CONFIG_MEDIA_SUPPORT_FILTER option, unless CONFIG_EXPERT is
enabled. Due to this, several arch defconfigs don't have
CONFIG_VIDEO_DEV enabled when doing $(call
KCONFIG_ENABLE_OPT,CONFIG_VIDEO_DEV).
To fix this, we enable one of the possible options that ensures
CONFIG_VIDEO_DEV is enabled, and we've more or less arbitrarily chosen
CONFIG_MEDIA_CAMERA_SUPPORT.
Fixes:
http://autobuild.buildroot.net/results/2a337d29e7870564027bcd42bd0addd228eb6a24/
We've tried to track down which kernel version introduced this
exactly, but it's been introduced a while ago and step by step making
it difficult to pin-point which version version exactly introduced
this. But the issue has been appearing for quite some time in the
autobuilders, so it's clearly not a recent issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 75d418b59d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
HOST_CFLAGS and HOST_LDFLAGS are currently not accounted for when
building host-perl. In particular, it means that executables
built/installed by host-perl do not have a RPATH pointing to
HOST_DIR/lib, which can cause issues as libcrypt.so can now be
provided by host-libxcrypt.
This was causing check-host-rpath to complain in the situation where:
1. host-perl was built, with no RPATH, linked against the system
libcrypt.so
2. host-libxcrypt was built afterwards, installed as
HOST_DIR/lib/libcrypt.so, which made check-host-rpath complain as
HOST_DIR/bin/perl is linked against a library present in
HOST_DIR/lib but doesn't have a RPATH to HOST_DIR/lib
Fixes:
http://autobuild.buildroot.net/results/d4348d7f872ccd734795a1d071960a696148ed6a/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 65127a8a77)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Newer versions of U-Boot (2024.10 and newer) will require the GnuTLS
library to be installed on the host machine to build the mkeficapsule
tool for U-Boot's image packaging phase to generate the final capsule
for all the boot images including the tiboot3.bin image.
Add host-gnutls to the list of dependencies.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/8723483578 (ti_am62x_sk_defconfig)
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
(cherry picked from commit eb9bb65629)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The configurations that have:
- BR2_ENABLE_RUNTIME_DEBUG=y
- One of BR2_FORTIFY_SOURCE_xyz=y
Currently fail to build, as libzenoh-pico's build system forces -O0
when BR2_ENABLE_RUNTIME_DEBUG=y, but -O0 builds aren't compatible with
_FORTIFY_SOURCE, causing:
../../../per-package/libzenoh-pico/host/mips64-buildroot-linux-gnu/sysroot/usr/include/features.h:422:4: error: #warning _FORTIFY_SOURCE requires compiling with optimization (-O) [-Werror=cpp]
422 | # warning _FORTIFY_SOURCE requires compiling with optimization (-O)
| ^~~~~~~
cc1: all warnings being treated as errors
We fix this by adding a patch that drops the forced -O3 (release
builds) and -O0 (debug builds) from the project CMakeLists.txt.
This issue exists since libzenoh-pico was introduced in Buildroot in
commit
a96361901d ("package/libzenoh-pico: new
package"), but was hidden by other issues until a first occurence in
November 2024 right after the bump to 1.0.1:
http://autobuild.buildroot.net/results/f109e8b4aba0286dcaac5cb6d4579e6d91c492f8/
Fixes:
http://autobuild.buildroot.net/results/f109e8b4aba0286dcaac5cb6d4579e6d91c492f8/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 0b785f5b06)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch fixes the following errors and warnings raised by the
compilation of libxml2 with the combination of GCC 14.x and uClibc.
encoding.c: In function ‘xmlEncInputChunk’:
encoding.c:2209:32: warning: comparison between pointer and integer
2209 | else if (handler->iconv_in != NULL) {
| ^~
encoding.c: In function ‘xmlEncOutputChunk’:
encoding.c:2269:33: warning: comparison between pointer and integer
2269 | else if (handler->iconv_out != NULL) {
| ^~
encoding.c: In function ‘xmlCharEncCloseFunc’:
encoding.c:2681:29: warning: comparison between pointer and integer
2681 | if ((handler->iconv_out != NULL) || (handler->iconv_in != NULL)) {
| ^~
encoding.c:2681:60: warning: comparison between pointer and integer
2681 | if ((handler->iconv_out != NULL) || (handler->iconv_in != NULL)) {
| ^~
encoding.c:2683:32: warning: comparison between pointer and integer
2683 | if (handler->iconv_out != NULL) {
| ^~
encoding.c:2686:32: error: assignment to ‘iconv_t’ {aka ‘long int’} from ‘void *’ makes integer from pointer without a cast [-Wint-conversion]
2686 | handler->iconv_out = NULL;
| ^
encoding.c:2688:31: warning: comparison between pointer and integer
2688 | if (handler->iconv_in != NULL) {
| ^~
encoding.c:2691:31: error: assignment to ‘iconv_t’ {aka ‘long int’} from ‘void *’ makes integer from pointer without a cast [-Wint-conversion]
2691 | handler->iconv_in = NULL;
| ^
make[4]: *** [Makefile:1147: libxml2_la-encoding.lo] Error 1
This code has been in libxml2 pretty much forever: it was partially
introduced in version 2.1.0: 496a1cf59284 ("496a1cf59284 revamped the
encoding support, added iconv support, so now libxml if") and
partially in version 2.2.3: 87b953957305 ("Large sync between my W3C
base and Gnome's one:"). And the first time Buildroot packaged
libxml2, it was version 2.6.29.
However, both glibc and musl define iconv_t as "void *", which meant
the libxml2 code was not problematic. uClibc defines iconv_t as
"long", which generated only a warning... until GCC got updated to GCC
14.x, which turned this warning into an error, causing the build
failure.
Fixes:
http://autobuild.buildroot.net/results/fd4f8d2e8d8ee68d9e18f761ceff350188e55a87/
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ca63c4409b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The handling of BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG is currently
not doing a proper job: it is selecting ppc64le_defconfig if
BR2_powerpc64le, and using the default of "defconfig" for everything
else.
However:
- Since upstream commit 22f17b02f88b48c01d3ac38d40d2b0b695ab2d10,
which landed in Linux 6.8, the default defconfig is
ppc64le_defconfig and no longer ppc64_defconfig. This means that
despite the condition in linux.mk, we are in fact now always
building ppc64le_defconfig.
- It doesn't handle the 32-bit case, as a 64-bit defconfig gets used
by default. This causes build failures in the autobuilders.
To fix this we explicitly handle BR2_powerpc64le, BR2_powerpc64 and
BR2_powerpc, and use appropriate defconfigs for each case.
Fixes:
http://autobuild.buildroot.net/results/c15eaf2e7455aa265cc045e6d8be7cac5348d925/ (powerpc)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 82326a3d83)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In the latest kernel, U-Boot images are always generated when building
a kernel for NIOS2. Note that we build the kernel with:
make all
make <selected-image>
so the selected image through Buildroot options doesn't matter: a
U-Boot image is always generated.
Therefore, in order to fix autobuilder issues, make sure
host-uboot-tools are always selected when building the latest kernel
version. We do not select it in general as custom versions may be
different.
Fixes:
http://autobuild.buildroot.net/results/1d4c249887bdd78dab40152ad3a4fcef16458a1a/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit d94c478ebc)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The datafiles include the dbus policy, without which bluetoothd fails
to start (unless it is provided by other means):
# /usr/libexec/bluetooth/bluetoothd -n
bluetoothd[1011]: Bluetooth daemon 5.78
D-Bus setup failed: Connection ":1.7" is not allowed to own the service "org.bluez" due to security policies in the configuration file
bluetoothd[1011]: src/main.c:main() Unable to get on D-Bus
The installation issue 1a8676aa6e was
meant to fix is the result of upstream incorrectly installing
/etc/bluetooth with 0555 (strictly read-only) permissions.
Fixes: 1a8676aa6e
Signed-off-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 421a92a897)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a basic test for Xvisor RISC-V 64bit. It is running few
management and status commands. It does not start a Linux kernel.
RISC-V 64bit was chosen for this test because it was the simplest
solution to run xvisor in a qemu emulator.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit e14380b3c4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building on a s390x host, we currently end up with:
output/host/lib
output/host/lib32 -> lib
output/host/lib64
host-libopenssl installs to lib64, but since the kernel build doesn't
explicitly search there, it breaks:
>>> linux 6.6.32 Building
[...]
HOSTCC scripts/sign-file
/usr/bin/ld: cannot find -lcrypto: No such file or directory
collect2: error: ld returned 1 exit status
Fix this by creating a lib64 link instead of lib32, so we get:
output/host/lib
output/host/lib64 -> lib
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 66a5f9bc74)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From
https://lists.freedesktop.org/archives/wayland-devel/2024-October/043858.html:
This is Weston 14.0.1, a bug-fix release. Most of the fixes here are
addressing some build issues with a C++ compiler, but also addressing a
more critical issue that was causing the gtk4 test suite or other clients
to crash when using the headless backend.
Some distros already carry a patch to address that, but in case they
have not, this would be a good time to update.
David Edmundson (1):
libweston: Send seat name before announcing devices
EatingSumo (1):
libweston/screenshooter: Fix build when __builtin_clz is not available
Jan Alexander Steffens (heftig) (1):
libweston/noop-renderer: Check shm_buffer for NULL
Jan Engelhardt (1):
build: insert missing wayland-server-protocol dependency
Jeri Li (1):
libweston/desktop: avoid weston crash while xdg_surface ack_configure
Marius Vlad (4):
libweston: Move weston_get_backend_type after enum declaration
desktop-shell: Don't attempt to re-add the view to panel layer
libweston/matrix: Fix narrow conversion with C++
build: bump to version 14.0.1 for the point release
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 6f74ee11b4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From
https://lists.freedesktop.org/archives/wayland-devel/2024-August/043760.html:
This is a bugfix release for Wayland 1.23.
Joaquim Monteiro (1):
meson: Fix use of install_data() without specifying install_dir
Kirill Primak (1):
Put WL_DEPRECATED in front of the function declarations
Sebastian Wick (1):
client: Handle proxies with no queue
Simon Ser (4):
scanner: extract validator function emission to helper function
scanner: fix validator for bitfields
tests: add enum bitfield test
build: bump version to 1.23.1 for the bugfix release
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit f27dcb9310)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the python-autocommand package has been introduced in commit
b6f3278539 ("package/python-autocommand:
new package"), it has consistently been failing to build with:
Traceback (most recent call last):
File "/home/autobuild/autobuild/instance-12/output-1/host/lib/python3.12/site-packages/pyproject_hooks/_in_process/_in_process.py", line 353, in <module>
main()
File "/home/autobuild/autobuild/instance-12/output-1/host/lib/python3.12/site-packages/pyproject_hooks/_in_process/_in_process.py", line 335, in main
json_out['return_val'] = hook(**hook_input['kwargs'])
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/autobuild/autobuild/instance-12/output-1/host/lib/python3.12/site-packages/pyproject_hooks/_in_process/_in_process.py", line 118, in get_requires_for_build_wheel
return hook(config_settings)
^^^^^^^^^^^^^^^^^^^^^
File "/home/autobuild/autobuild/instance-12/output-1/host/lib/python3.12/site-packages/setuptools/build_meta.py", line 327, in get_requires_for_build_wheel
return self._get_build_requires(config_settings, requirements=[])
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/autobuild/autobuild/instance-12/output-1/host/lib/python3.12/site-packages/setuptools/build_meta.py", line 297, in _get_build_requires
self.run_setup()
File "/home/autobuild/autobuild/instance-12/output-1/host/lib/python3.12/site-packages/setuptools/build_meta.py", line 497, in run_setup
super().run_setup(setup_script=setup_script)
File "/home/autobuild/autobuild/instance-12/output-1/host/lib/python3.12/site-packages/setuptools/build_meta.py", line 313, in run_setup
exec(code, locals())
File "<string>", line 8, in <module>
File "/home/autobuild/autobuild/instance-12/output-1/host/lib/python3.12/site-packages/setuptools/__init__.py", line 108, in setup
return distutils.core.setup(**attrs)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/autobuild/autobuild/instance-12/output-1/host/lib/python3.12/site-packages/setuptools/_distutils/core.py", line 158, in setup
dist.parse_config_files()
File "/home/autobuild/autobuild/instance-12/output-1/host/lib/python3.12/site-packages/setuptools/dist.py", line 632, in parse_config_files
pyprojecttoml.apply_configuration(self, filename, ignore_option_errors)
File "/home/autobuild/autobuild/instance-12/output-1/host/lib/python3.12/site-packages/setuptools/config/pyprojecttoml.py", line 71, in apply_configuration
return _apply(dist, config, filepath)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/autobuild/autobuild/instance-12/output-1/host/lib/python3.12/site-packages/setuptools/config/_apply_pyprojecttoml.py", line 53, in apply
_apply_project_table(dist, config, root_dir)
File "/home/autobuild/autobuild/instance-12/output-1/host/lib/python3.12/site-packages/setuptools/config/_apply_pyprojecttoml.py", line 79, in _apply_project_table
corresp(dist, value, root_dir)
File "/home/autobuild/autobuild/instance-12/output-1/host/lib/python3.12/site-packages/setuptools/config/_apply_pyprojecttoml.py", line 181, in _license
_set_config(dist, "license", val["text"])
~~~^^^^^^^^
KeyError: 'text'
This is due to incorrect license information in pyproject.toml. This
was probably missed as the package was merged ~6 months after it was
submitted, so probably at the time it was submitted, it worked fine,
but got broken with more recent versions of setuptools.
Fixes:
http://autobuild.buildroot.net/results/c9114834eb00569cdb8ec3251ccd5ecfd906c9c9/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 621ebccf3f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
CVE-2024-11614: An out-of-bounds read vulnerability was found in DPDK's
Vhost library checksum offload feature. This issue enables an untrusted or
compromised guest to crash the hypervisor's vSwitch by forging Virtio
descriptors to cause out-of-bounds reads. This flaw allows an attacker with
a malicious VM using a virtio driver to cause the vhost-user side to crash
by sending a packet with a Tx checksum offload request and an invalid
csum_start offset.
https://www.openwall.com/lists/oss-security/2024/12/17/3
Release notes: http://doc.dpdk.org/guides-24.11/rel_notes/release_24_11.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 3645e3b781)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerabilities:
CVE-2022-33065: Multiple signed integers overflow in function au_read_header
in src/au.c and in functions mat4_open and mat4_read_header in src/mat4.c in
Libsndfile, allows an attacker to cause Denial of Service or other
unspecified impacts.
CVE-2024-50612: libsndfile through 1.2.2 has an ogg_vorbis.c
vorbis_analysis_wrote out-of-bounds read.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit e675ffd964)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2023-49582: Lax permissions set by the Apache Portable Runtime
library on Unix platforms would allow local users read access to named
shared memory segments, potentially revealing sensitive application data.
This issue does not affect non-Unix platforms, or builds with
APR_USE_SHMEM_SHMGET=1 (apr.h) Users are recommended to upgrade to APR
version 1.7.5, which fixes this issue.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit a60c38b381)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes build error
/home/buildroot/buildroot/output/build/wpewebkit-2.44.4/Source/WTF/wtf/StackBounds.cpp: In static member function 'static WTF::StackBounds WTF::StackBounds::newThreadStackBounds(WTF::PlatformThreadHandle)':
/home/buildroot/buildroot/output/build/wpewebkit-2.44.4/Source/WTF/wtf/StackBounds.cpp:117:5: error: 'pthread_getattr_np' was not declared in this scope; did you mean 'pthread_attr_t'?
117 | pthread_getattr_np(thread, &sattr);
using this defconfig (and libvpx bump to 1.15.0 reverted)
BR2_arm=y
BR2_TOOLCHAIN_BUILDROOT_UCLIBC=y
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_PTHREADS=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PER_PACKAGE_DIRECTORIES=y
BR2_PACKAGE_RPI_USERLAND=y
BR2_PACKAGE_LIBGTK3=y
BR2_PACKAGE_WPEWEBKIT=y
A backport of this patch should be considered because the code is
present since 2011:
https://github.com/WebKit/WebKit/blame/03f678fac7076e4d69318bfaae065e4c0eab0f9e/Source/WTF/wtf/StackBounds.cpp#L117
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 9f4a95e5c6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes build error
/home/buildroot/buildroot/output/build/webkitgtk-2.44.2/Source/WTF/wtf/StackBounds.cpp: In static member function 'static WTF::StackBounds WTF::StackBounds::newThreadStackBounds(WTF::PlatformThreadHandle)':
/home/buildroot/buildroot/output/build/webkitgtk-2.44.2/Source/WTF/wtf/StackBounds.cpp:117:5: error: 'pthread_getattr_np' was not declared in this scope; did you mean 'pthread_attr_t'?
117 | pthread_getattr_np(thread, &sattr);
using this defconfig (and libvpx bump to 1.15.0 reverted)
BR2_arm=y
BR2_TOOLCHAIN_BUILDROOT_UCLIBC=y
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_PTHREADS=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PER_PACKAGE_DIRECTORIES=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_RPI_USERLAND=y
BR2_PACKAGE_LIBGTK3=y
BR2_PACKAGE_WEBKITGTK=y
A backport of this patch should be considered because the code is
present since 2011:
https://github.com/WebKit/WebKit/blame/03f678fac7076e4d69318bfaae065e4c0eab0f9e/Source/WTF/wtf/StackBounds.cpp#L117
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 054e5c4d22)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes build error
-- Could NOT find LibDRM (missing: LibDRM_INCLUDE_DIR LibDRM_LIBRARY)
CMake Error at Source/cmake/OptionsGTK.cmake:320 (message):
libdrm is required for USE_LIBDRM
Call Stack (most recent call first):
Source/cmake/WebKitCommon.cmake:237 (include)
CMakeLists.txt:21 (include)
with this defconfig:
BR2_arm=y
BR2_TOOLCHAIN_BUILDROOT_UCLIBC=y
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_PTHREADS=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PER_PACKAGE_DIRECTORIES=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_RPI_USERLAND=y
BR2_PACKAGE_LIBGTK3=y
BR2_PACKAGE_WEBKITGTK=y
due to libdrm being enabled by default:
https://github.com/WebKit/WebKit/blob/f736325e66bfa8e85f85387299448476f3e1fb3c/Source/cmake/OptionsGTK.cmake#L59
This is a port of buildroot commit 65f8174648
for the wpewebkit package, quoting its commit message:
Pass USE_LIBDRM=OFF to the wpewebkit CMake configuration step when the
libdrm package has not been selected.
WPE WebKit can be built without libdrm support, and it will still work
with backends that use other platform-specific methods to handle
graphics buffers and/or presenting content onto an output. For example
this is the case with wpebackend-rdk configured to use rpi-userland,
which uses dispmanx to produce the output instead of DRM/KMS.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 865457e762)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/23f0f7386f7d430c402b24f3b58b1c20c1c8344a/
Linux commit d69d8048459 "driver core: have match() callback in struct
bus_type take a const *", which was added in 6.11-rc1, changed the interface
for sysfs match callback to accept a const struct device_driver, breaking
the build of dahdi-linux:
CC [M] build/dahdi-linux-3.3.0/drivers/dahdi/dahdi-sysfs.o
build/dahdi-linux-3.3.0/drivers/dahdi/dahdi-sysfs.c:275:27: error: initialization
of "int (*)(struct device *, const struct device_driver *)" from incompatible
pointer type "int (*)(struct device *, struct device_driver *)"
[-Werror=incompatible-pointer-types]
275 | .match = span_match,
Add a patch submitted upstream to fix that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit 4533795cde)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2024-53907: Potential denial-of-service in
django.utils.html.strip_tags()
The strip_tags() method and striptags template filter are subject to a
potential denial-of-service attack via certain inputs containing large
sequences of nested incomplete HTML entities.
CVE-2024-53908: Potential SQL injection in HasKey(lhs, rhs) on Oracle
Direct usage of the django.db.models.fields.json.HasKey lookup on Oracle is
subject to SQL injection if untrusted data is used as a lhs value.
Applications that use the jsonfield.has_key lookup through the __ syntax are
unaffected.
https://www.djangoproject.com/weblog/2024/dec/04/security-releases/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
(cherry picked from commit c2c1c27d11)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Release notes:
https://lists.gnu.org/archive/html/bug-wget/2024-11/msg00002.html
Fixes the following vulnerabilities:
- CVE-2024-38428: url.c in GNU Wget through 1.24.5 mishandles semicolons in
the userinfo subcomponent of a URI, and thus there may be insecure
behavior in which data that was supposed to be in the userinfo
subcomponent is misinterpreted to be part of the host subcomponent.
https://nvd.nist.gov/vuln/detail/CVE-2024-38428
- CVE-2024-10524: Applications that use Wget to access a remote resource
using shorthand URLs and pass arbitrary user credentials in the URL are
vulnerable. In these cases attackers can enter crafted credentials which
will cause Wget to access an arbitrary host.
https://www.openwall.com/lists/oss-security/2024/11/18/6
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 295b2c4f8e)
[Peter: mark as security bump]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In some specific situations, there is subtle bugs which depends on a
specific Qemu emulator version and the code it runs.
For example, EDK2 on Aarch64 could work with specific versions of Qemu,
EDK2 and ATF. See commit cc0823c2d "boot/edk2: bump to version
edk2-stable202405" [1].
Also, some Qemu bugs made the guest OS crash. See for example commit
9534b9c00 "package/qemu: fix qemu 9.x issue for AArch32 Secure
PL1&0" [2].
Commit 0d4177598 "support/testing/infra/emulator.py: add build host
dir to qemu search path" added the ability for a runtime test to
select host-qemu in order to use it. It is also possible for a user
to use the "utils/run-tests" script on its host system providing its
own version of Qemu. The Buildroot CI can also use its Qemu version
included in the reference Docker image.
This means the Qemu emulator for running a runtime test can be from
several sources:
- Buildroot Docker reference image,
- Buildroot host-qemu package version,
- Developer host OS qemu version.
Those versions can also change in time.
In order to help debugging of those subtle emulator bugs, this commit
adds a recording of the actual Qemu version used to run a test.
[1] https://gitlab.com/buildroot.org/buildroot/-/commit/cc0823c2d14321b91b94801834050331f5ea28e1
[2] https://gitlab.com/buildroot.org/buildroot/-/commit/9534b9c00c23cfd69a4e122c26fca9d3da93d329
[3] https://gitlab.com/buildroot.org/buildroot/-/commit/0d4177598ce7e73f2b97ac58c21fb177343643e3
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
(cherry picked from commit ed9da08944)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The weston runtime test is unreliable, depending on the execution speed
of its runner. Example of failure is [1], and success is [2]. This
commit improves the test in several ways, to make it more robust to
execution speed variations:
- The command started in background (weston, weston-simple-egl) are
now started in a subshell. This suppresses the job control messages
when they are stopped. Those messages could interfere with the parsing
of the output;
- Wait time are moved outside the emulator;
- The kernel argument vt.global_cursor_default=0 is added, to make sure
cursors are globally disabled, since the test use vkms display CRCs;
- The memory of the emulator is increased to 512M. This test uses cpio
initramfs, and the filesystem size increased;
- The vkms driver emulates a "vsync" event, but can generate a warning
when the system is too slow. This warning is printed on the console by
the klogd daemon in its default configuration. This commit adds the
overlay file /etc/default/klogd to limit only kernel emergency
messages to be printed on the console. This change fixes the failure
seen in [1] ;
- Some sleep time values were adjusted to run on a "performant" idle
host. Those values are not suitable in all situations. In the
meantime a generic retry mechanism is added in the test infra, this
commit adds a retry logic inspired from the test_flutter runtime
test.
Fixes: [1]
[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/8562483474
[2] https://gitlab.com/buildroot.org/buildroot/-/jobs/8435236652
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The lmbench package (largely unmaintained upstream, last release in
2006) uses a home-grown build system. The scripts/build script sets
LDLIBS to -lm and Buildroot's makefile changes that to:
LDLIBS+=-lm
Except that when Buildroot passes LDLIBS="`$(PKG_CONFIG_HOST_BINARY)
--libs libtirpc`", the LDLIBS variable ends up being equal to:
-ltirpc-lm
Yes, without any space between -ltirpc and -lm.
Due to this, the checks in scripts/build that use ${LDLIBS} all fail,
and in particular the test that checks when socklen_t is a known type
fails, causing lmbench to provide its own definition, which clashes
with the C library headers definition, and therefore causing build
failures such as:
bench.h:81:13: error: conflicting types for 'socklen_t'; have 'int'
This commit fixes that by adjusting scripts/build using a patch to
properly allow passing additional ${LDLIBS} value, with the needed
space to separate the value from -lm.
Fixes:
http://autobuild.buildroot.net/results/f1715de95b46a1d08143e529bd4574bc7dbcfb3e/
We have been unable to determine exactly when this issue was
introduced. The first build failure we could find is the one
referenced above, which dates back from Aug 19, 2024. Since this date,
lmbench has been consistently failing on a very regular
basis. However, prior to Aug 19, 2024, the previous failure was from
December 2022, and was unrelated. It is unclear what changed in Aug
2024 to cause this issue to surface. The one thing that changed right
before commit ce3dedc2 (first failing commit) are changes to
genrandconfig, which ensures all autobuilders now generated fully
random configurations instead of configurations based on a
well-defined list of arch/toolchain configurations. But even with
this, this lmbench issue should have appeared earlier, and we have
been unable to find a scientific explanation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The android-tools code base uses the __b64_pton() function, which
isn't provided by all C libraries. So the Debian patch
debian/patches/add_adbd.patch adds an implementation of b64_pton(),
but doesn't actually use it, nor defines a prototype for it. Our
existing patch 0003-Fix-build-issue-with-uclibc.patch switches the
code to use the b64_pton() function... but still without providing a
prototype, causing the following build failures with GCC >= 14.x:
adb_auth_client.c:75:15: error: implicit declaration of function 'b64_pton'
To fix this, we rework 0003-Fix-build-issue-with-uclibc.patch into a
patch that:
(1) Renames b64_pton() to adb_b64_pton() to make sure it won't clash
with implementations provided by some C libraries, and adjusts
the call sites accordingly.
(2) Adds a prototype definition of adb_b64_pton() in places where
this function is used.
Fixes:
http://autobuild.buildroot.net/results/b25b25337c7ad89c33f8bd20b646850bd993ec53ae9/
Even though GCC 14.x support was merged in Buildroot in May 2024, this
particular b64_pton() only started appearing on July 15 2024, with the
first occurence being:
http://autobuild.buildroot.net/results/1cbe87bbe3c56f28444b3aaba1ba1d05f947d36e/
Indeed, it's not before July 15 2024 that we merged commit
d201f2f5cd ("package/android-tools: add
patches to fix build with GCC 14.x"), which fixed other GCC 14.x
issues, which were hiding this b64_pton() problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The kernel headers on mips64 and powerpc64 were historically "broken",
defining u64 as an "unsigned long" instead of "unsigned long
long". This has been fixed in the upstream Linux kernel by introducing
the __SANE_USERSPACE_TYPES__ definition.
Our commit a2e178d6b4 ("android-tools:
disable on some architecture with old kernel headers") already
disabled building fastboot on powerpc64 and mips64 systems that have
too old kernel headers. However, it turns out that even with the new
kernel headers, there are build issues because
__SANE_USERSPACE_TYPES__ isn't defined everywhere it should be in the
android-tools code base. The Debian patche
debian/patches/ppc64el-ftbfs.patch adds some definitions, but it's
missing one file, and in another the definition comes too late.
This commit adds an extra patch that fixes this up, and makes fastboot
build properly on mips64 and powerpc64.
Fixes:
http://autobuild.buildroot.net/results/8528ff876e695f79bdfe64f5330d9d51eeef66cb/ (powerpc64)
http://autobuild.buildroot.net/results/36ac6af73b618c28d1636093da333f7ebd9d6cfe/ (mips64)
This issue has been occurring as far as Feb 2021, with the first
occurence apparently being:
http://autobuild.buildroot.net/results/d9521b4bfeafb1140c21745dbfe28d476a9b71ec/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This will make it easier to modify the patch series moving forward. No
functional changes.
On one patch, we added the SoB from Giulio, which was missing. Giulio
was the original contributor of the patch, and nobody touched it since
it was introduced.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Upstream moved old versions in an "older" directory. The current version
in Buildroot was moved to this directory and fail to download.
This commit simply updates the _SITE url to reflect this change.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/8514189435
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
losetup -f returns the next free loop device, which may not be
/dev/loop0. If you blindly follow the readmy you may end up destroying
an existing device.
Make it more robust with a variable to store the loop device.
Signed-off-by: Cherniaev Andrei <dungeonlords789@naver.com>
[Arnout: keep the actual losetup atomic]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
nfs-utils configure script uses "systemd-escape" to determine the
rpc_pipefs mount point unit name in the non-default case.
If the host build system has no systemd this will silently result in an
empty name, causing rpc_pipefs.target to incorrectly depend on ".mount".
Fix that by depending on host-systemd for build.
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Acked-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
When the rust package was added in Buildroot it was using
the 1.23.0 release [1] where some vendored sources contained a
Cargo.toml.orig file that caused issues with
support/scripts/apply-patches.sh used by Buildroot package
infrastructure.
Since then, Buildroot is now using rust 1.74.1 (2024.02.x),
1.79.0 (2024.08.x) and 1.82.0 (master) where vendored
sources no longer contains any Cargo.toml.orig file.
So this post-extract hook is no longer needed.
Moreover, since Rust 1.81.0 are present in
src/tools/rustc-perf/collector/compile-benchmarks/<vendored pkg>
where there is no .cargo-checksum.json file.
Since then, the sed command fail and stop the build:
sed: can't read [...]/host-rust-1.81.0/src/tools/rustc-perf/collector/compile-benchmarks/serde_derive-1.0.136/.cargo-checksum.json: No such file or directory
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/8232367821
[1] b50522d838
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The particular combination of LVM2 (which enables -PIE), musl-libc with
dynamic linking (and thus -ztext, banning TEXTRELs), and microblaze
leads to an error because a TEXTREL is produced in musl-libc's Scrt1.o.
The upstream patch added in this commit fixes (or works around) the
problem.
Fixes: http://autobuild.buildroot.net/results/5bb283eff4b4a2b17d1028bbe0b3e1bea8fbeba8/
Signed-off-by: J. Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
As it happens, I am unable to keep maintaining those entries, and it is
misleading to others about whether they should Cc me on their changes.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
When halting the boot process in u-boot, the 'usb start' command does not
automatically run. Since the SD card is connected over a USB to SD card
bridge on the kd240 and kr260 boards, the readme.txt instructions should
document that the 'usb start' command needs to be manually enterred when
following the reflashing instructions. Otherwise, the command to read the
boot.bin and u-boot.itb files from the SD card will fail.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
This failure appeared when trying to build lrzsz:
lsyslog.c:73:5: error: implicit declaration of function ‘vasprintf’; did you mean ‘vsprintf’? [-Wimplicit-function-declaration]
To fix the problem, let's follow Debian. Switch to 0.12.21rc (which is
already out there 25 years!) and import their patch adding includes.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
[Peter: add Upstream tag to patch]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The mosquitto runtime test can randomly fail on slow
runners, see [1].
This commit improves this test in the following ways:
- the mosquitto_sub subscriber process is now started in a subshell
to suppress the job control messages (to prevent any spurious
messages when the job stops),
- the standard error is redirected to /dev/null, to prevent the
printing of any messages,
- the mosquitto_pub publisher process is started later, by increasing
the sleep time,
- finally, a new sleep time is introduced between the mosquitto_pub
publisher process and the check of the mosquitto_sub subscriber, to
make sure it will have time to write its output and exit.
Fixes: [1]
[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/8453386454
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Release notes: https://www.postgresql.org/docs/release/16.6/
Note: this minor version bump fixes a bug introduced in postgresql
security bump to 16.5 fixing CVE-2024-10978.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
[Julien: add note in commit log]
Signed-off-by: Julien Olivain <ju.o@free.fr>
Since the bump of util-linux to version 2.40.2 in Buildroot commit
f14929c657 ("package/util-linux: update
to 2.40.2"), the build will fail on systems that are not Y2038,
such as uClibc configurations.
In order to preserve the previous behavior, pass --disable-year2038.
See the gnulib documentation for details [1]. Contrary to what the
option name might suggest, it doesn't really disable Y2038 support,
but only the check that the system is Y2038 compliant. So even with
--disable-year2038, if the system is Y2038 compliant (uses a 64-bit
arch, uses the musl C library, or uses the glibc C library with
BR2_TIME_BITS_64=y), util-linux tools will be Y2038 compliant.
"--disable-year2038" was already added to util-linux in commit
11ae90b00 "package/util-linux: allowing building even on non-Y2038
compliant systems".
Fixes:
https://autobuild.buildroot.org/results/630fc287deb1cf5a684f274058b918a5d7aef989
[1] https://www.gnu.org/software/gnulib/manual/html_node/Avoiding-the-year-2038-problem.html
Reviewed-by: Vincent Jardin <vjardin@free.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Host bmap-tools runs using host-python3, but did not select it,
leading to the confusing situation that BR2_PACKAGE_HOST_PYTHON3=n
even though it was built and working.
Signed-off-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 7b2a164b74 (package/go/go-bin: new host-go provider) broke the
case for prompt-less, host-only go packages, as the main host-go symbol
would not be selected.
This very same use-case was initially broken when the first go-src
provider was introduced with fa2536ec94 (package/go: make host package
a virtual package), and subsequently fixed in 99a5d51c6e (package/go:
ensure there is a host-go provider), so 7b2a164b74 is causing a
regression of a fixed regression.
Fix that the very same way it was originally fixed.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Julien Olivain <ju.o@free.fr>
host-skopeo fail to build, using the commands:
echo BR2_PACKAGE_HOST_SKOPEO=y >.config
make olddefconfig
make host-skopeo
This commit fixes the issue by selecting BR2_PACKAGE_HOST_GO
in the Config.in file.
Fixes:
make: *** No rule to make target 'host-', needed by '/buildroot/output/build/host-go-1.23.2/.stamp_configured'. Stop.
Reviewed-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
I will lose access to my email next week, so hand
it over to Leo Yu-Chi Liang.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Asaf has privately requested to be removed from the DEVELOPERS file as
he will no longer be contributing to Buildroot in the forseeable
future.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
upstream mistakenly based 1.8.3 on 1.8.1 so it didn't include the
1.8.2 fixes. 1.8.4 includes fixes from 1.8.2 and 1.8.3.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The last xenomai version bump [1] forgot to update the
BR2_PACKAGE_XENOMAI_LATEST_VERSION option string.
[1] 44fafcc41a
Reported-by: Pierre Ficheux <pierre.ficheux@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
As of baa3db0c34 webp mux/demux are no
longer optional for webp support in python-pillow. The
-Cwebpmux=enable/disable option no longer exists.
Fixes:
DependencyException:
The headers or library files could not be found for webp,
which was requested by the option flag --enable-webp
Fixes: baa3db0c34
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
For release announce, see:
https://lists.gnu.org/archive/html/info-gnu/2024-07/msg00002.html
This commit also updates the hash file comment, to use the sha256 hash
published in the release announce, to provide the signature URL and the
pgp key id used for the signature verification.
See the gnulib documentation for details [1]. Contrary to what the
option name might suggest, it doesn't really disable Y2038 support,
but only the check that the system is Y2038 compliant. So even with
--disable-year2038, if the system is Y2038 compliant (uses a 64-bit
arch, uses the musl C library, or uses the glibc C library with
BR2_TIME_BITS_64=y), findutils will be Y2038 compliant.
[1] https://www.gnu.org/software/gnulib/manual/html_node/Avoiding-the-year-2038-problem.html
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bootstrap the installation of Mellanox/NVIDIA Bluefield scripts
that can be run either on the host CPU or on the onboard ARM64 CPU.
Signed-off-by: Vincent Jardin <vjardin@free.fr>
Reviewed-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Due to a bug in the Config.in comment dependencies, the comment "***
picotool needs a toolchain w/ C++, threads, gcc >= 4.9 ***" is always
shown even if all features are enabled.
Fixes: d30c1e3c58 ("package/picotool: fix libusb dependencies")
Signed-off-by: Cherniaev Andrei <dungeonlords789@naver.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop patches which are now upstream.
Drop no longer required python-six runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Recently, Fiona has been involved in a very nice effort to clean up
our init scripts, and make them more consistent with each other. In
order to continue this effort, let's make sure Fiona gets Cc'ed on all
patches that touch init scripts by adding her to the DEVELOPERS file
for package/*/S*.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
This is minor update to iotools to fix some issues Aaron noticed and
addressed. The bigger change will come later with better integration
with the regular build systems (CMake).
Cc: Aaron Sierra <aaron@bubbl-tek.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
[Julien: removed the "v" in version number]
Signed-off-by: Julien Olivain <ju.o@free.fr>
Drop no longer required patch which is now upstream.
Add new python-typing-extensions runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new poetry setup type which automatically pulls in the
host-python-poetry-core dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new poetry setup type which automatically pulls in the
host-python-poetry-core dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new poetry setup type which automatically pulls in the
host-python-poetry-core dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new poetry setup type which automatically pulls in the
host-python-poetry-core dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new poetry setup type which automatically pulls in the
host-python-poetry-core dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new poetry setup type which automatically pulls in the
host-python-poetry-core dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new poetry setup type which automatically pulls in the
host-python-poetry-core dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new poetry setup type which automatically pulls in the
host-python-poetry-core dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new poetry setup type which automatically pulls in the
host-python-poetry-core dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new poetry setup type which automatically pulls in the
host-python-poetry-core dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new poetry setup type which automatically pulls in the
host-python-poetry-core dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new poetry setup type which automatically pulls in the
host-python-poetry-core dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new poetry setup type which automatically pulls in the
host-python-poetry-core dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new poetry setup type which automatically pulls in the
host-python-poetry-core dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new poetry setup type which automatically pulls in the
host-python-poetry-core dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new poetry setup type which automatically pulls in the
host-python-poetry-core dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new poetry setup type which automatically pulls in the
host-python-poetry-core dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new poetry setup type which automatically pulls in the
host-python-poetry-core dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new poetry setup type which automatically pulls in the
host-python-poetry-core dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new poetry setup type which automatically pulls in the
host-python-poetry-core dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new poetry setup type which automatically pulls in the
host-python-poetry-core dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new poetry setup type which automatically pulls in the
host-python-poetry-core dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new poetry setup type which automatically pulls in the
host-python-poetry-core dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new poetry setup type which automatically pulls in the
host-python-poetry-core dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch bumps the Linux kernel to version 6.10.13 and U-Boot to
version 2024.10. As for U-Boot, the new version has added EFI Capsule
support, which depends on GnuTLS, thus requiring the activation of
BR2_TARGET_UBOOT_NEEDS_GNUTLS.
Arm trusted firmware is already up to date.
Co-developed-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Introduce the initial base-port support for the SK-AM62P reference board
made by Texas Instruments.
Signed-off-by: Bryan Brattlof <bb@ti.com>
[Arnout: extend explanation of tiboot3.bin]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Rebase only prefix subset of variables patch.
Drop revert main assume modversion patch which is now upstream.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We need to add a patch fixing the protoc version check in collectd's
configure script, prior to bumping protobuf to a newer version.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We need to backport a patch to fix compatibility with newer protobuf
versions, prior to bumping protobuf.
Remove CFLAGS setting -std=c++11 and enable autoreconf so that
the patch is applied properly.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This allows us to build libspdm with support for `spdm-context` in the
HAL functions. This is required by `spdm-utils`, this macro will be
dissolved in libspdm 4.x, with this feature being defaulted on.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
[Julien: rebased on libspdm 3.5.0 recipe]
Signed-off-by: Julien Olivain <ju.o@free.fr>
When building the rock5b with BR2_PER_PACKAGE_DIRECTORIES enabled, the
following error occurs from U-Boot.
tools/mkeficapsule.c:19:10: fatal error: uuid/uuid.h: No such file or
directory
19 | #include <uuid/uuid.h>
| ^~~~~~~~~~~~~
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Julien Olivain <ju.o@free.fr>
As we have many python packages using the poetry(poetry-core) build
system we should add a setup type for it so that we don't have to
manually specify the host-python-poetry-core dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The EDK2 bump to stable202405 introduced an incompatibility with the
Qemu version 5.2.0 present in the reference Docker image. For that
reason, this test was disabled.
This commit enables host-qemu in the build, to be used by the runtime
test infrastructure.
Since this commit switch to a more recent host-qemu, it also removes
firmware options to workaround old qemu bugs.
Those changes are fixing this test, which is why this commit re-enables
it by removing the skipTest() invocation.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The EDK2 bump to stable202405 introduced an incompatibility with the
Qemu version 5.2.0 present in the reference Docker image. For that
reason, this test was disabled.
This commit updates ATF to 2.11, and enables host-qemu in the build,
to be used by the runtime test infrastructure.
Those changes are fixing this test, which is why this commit re-enables
it by removing the skipTest() invocation.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The EDK2 bump to stable202405 introduced an incompatibility with the
Qemu version 5.2.0 present in the reference Docker image. For that
reason, this test was disabled.
This commit updates ATF to 2.11 and kernel to 6.6.58, and enables
host-qemu in the build, to be used by the runtime test infrastructure.
Those changes are fixing this test, which is why this commit re-enables
it by removing the skipTest() invocation.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The relevant qemu emulator is started with pexpect.spawn() with a
default environment (and PATH). This will always use the qemu available
on the host. When running in the reference Docker image, it is using an
old Qemu v5.2.0. This version is getting too old to run with more
recent components, like EDK2 or ATF.
The main reason to use a qemu version preinstalled in the Docker image
was to save some build time. Also, this behavior is opposite to the
"start-qemu.sh" helper script [1], which tries to execute the
Buildroot host-qemu first (and then fallback the the version on the
host system, if available). An option was added in [2] to let the user
have a better control on which version is used.
Also, updating the Buildroot reference Docker image has a larger
impact on the whole project (i.e. updating the image would bring
a newer qemu version, but might break many other things, at a time
which is not always convenient).
We now need some kind of control in runtime tests, to choose between a
"stock" qemu, and a more recent version with all the bells and
whistles.
This commit adds the Buildroot host build directory in the path. This
will make the runtime test infrastructure to use a host-qemu, if
selected by a runtime test configuration.
For now, most of the test can continue to use the qemu version provided
in the Docker image. Only the problematic tests relying on a recent
version will select BR2_PACKAGE_HOST_QEMU=y. The host-qemu package is
usually maintained to a recent version, so this should be sufficient.
[1] https://gitlab.com/buildroot.org/buildroot/-/blob/master/board/qemu/start-qemu.sh.in
[2] https://gitlab.com/buildroot.org/buildroot/-/commit/5de78f181acc53959b0a446a3fb116ecdec13577
Signed-off-by: Julien Olivain <ju.o@free.fr>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The SBSA Reference Platform was updated to neoverse-n1 (armv8.2a) in
Qemu v8.1 [1].
BR2_cortex_a57:
# cat /proc/cpuinfo
processor : 0
BogoMIPS : 2000.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x1
CPU part : 0xd07
CPU revision : 0
[...]
BR2_neoverse_n1:
# cat /proc/cpuinfo
processor : 0
BogoMIPS : 2000.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp ssbs
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x4
CPU part : 0xd0c
CPU revision : 1
[...]
Tests test_fwts.py test_edk2.py using
BR2_TARGET_EDK2_PLATFORM_QEMU_SBSA=y are not updated to neoverse-n1 by
this commit. Those tests were disabled in a previous commit. Those
tests will be updated and fixed in followup commits.
Note: SBSA Reference Platform was recently updated again to neoverse-n2
(armv9.0a) in Qemu v9.1 [2]. But there is no armv9.0a support yet in
Buildroot.
[1] https://gitlab.com/qemu-project/qemu/-/commit/1877272bad7b08b67312503ee66184279876c7bd
[2] https://gitlab.com/qemu-project/qemu/-/commit/b1d592e7b0a7301eae8e3baa99744ac35db3cd2a
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[Julien: add a small comment in commit log about tests]
Signed-off-by: Julien Olivain <ju.o@free.fr>
Release notes:
https://github.com/tianocore/edk2/releases/tag/edk2-stable202405
We can't bump to edk2-stable202408 yet due to a runtime issue while
testing qemu_aarch64_sbsa_defconfig following the switch generic
ArmPsciResetSystemLib [1]
ERROR: sbsa_sip_smc_handler: unhandled SMC (0xc20000ca) (function id: 202)
Qemu 9.0/9.1 is using a slightly older edk2 firmware based on
edk2-stable202405 release [2] that contains a commit [3] fixing a
bootloader crash produced with qemu_aarch64_sbsa_defconfig [4] since
Qemu 9.0.
From [5]:
"The version of the sbsa-ref EDK2 firmware we used to use in this test
had a bug where it might make an unaligned access to the framebuffer,
which causes a guest crash on newer versions of QEMU where we enforce
the architectural requirement that unaligned accesses to Device memory
should take an exception."
This commit [5] is backported to edk2-stable202405.
For the same reason, we have to update edk2-platforms to a specific
version [6]:
"QemuSbsa: enable WriteCombine for the FrameBuffer
QEMU no longer permits misaligned access to device memory, which breaks
QemuVideoDxe on SbsaQemu.
c1d1910be6e04a8b1a73090cf2881fb698947a6e commit in EDK2 fixed it by
enabling WriteCombine for Framebuffer memory. This change enables that
fix."
As a side note, the edk2-non-osi package does not need to be updated, so
it is left untouched.
Finally, this EDK2 version requires a recent Qemu version. The version
included in the reference Docker image (5.2.0) is too old and will not
allow to start this EDK2 version. Therefore, this bump is known to be
incompatible with runtime tests which are using EDK2 on Aarch64
architecture. At the authoring time of this commit, broken tests are:
- tests.boot.test_edk2
- tests.boot.test_grub.TestGrubAArch64EFI
- tests.package.test_fwts
Note that the EDK2/Qemu incompatibility is only affecting Aarch64
tests. Other tests using EDK2 on i386 or x86_64 are not affected.
To prevent this commit introducing broken runtime tests, those have
been disabled in a previous commit.
[1] https://github.com/tianocore/edk2-platforms/commit/2d0668d399708fc242336e310cc7e7bec0aec891
[2] https://gitlab.com/qemu-project/qemu/-/commit/24a7cd6a7c21f82f1ce9bd5ecf6fb54eb7bf4602
[3] https://github.com/tianocore/edk2/commit/c1d1910be6e04a8b1a73090cf2881fb698947a6e
[4] https://gitlab.com/buildroot.org/buildroot/-/jobs/7764483764
[5] https://gitlab.com/qemu-project/qemu/-/commit/6c84daac58f0d75a908626faf89a832fc0532140
[6] https://github.com/tianocore/edk2-platforms/commit/3f08401365d67e10924c774e6c3f64be56bc15b6
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7764483764
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Waldemar Brodkorb <wbx@openadk.org>
[Julien: add comments in commit log]
Signed-off-by: Julien Olivain <ju.o@free.fr>
EDK2 version edk2-stable202405 (not yet in Buildroot) has dependencies
on specific Qemu version.
Buildroot guidelines also recommend that "each patch must be complete".
See: [1]. This means, a patch in a series is not allowed to break
something knowingly, even in the same patch series. This rule is
mainly for using git bisect.
We also want to avoid bumping EDK2, update the runtime test infra,
and few tests in a big single commit, for readability. This would mix
too many changes in the same commit.
As a trade off, this commit disables the runtime tests which are known
to be broken by the upcoming edk2 update. Then, those tests will be
individually fixed and re-enabled in followup commits.
This EDK2/Qemu incompatibility only affects runtime tests using EDK2
on the Arm Aarch64 architecture. This commit disable the runtime
tests by adding a "skipTest()" call in:
- tests.boot.test_edk2
- tests.boot.test_grub.TestGrubAArch64EFI
- tests.package.test_fwts
[1] https://buildroot.org/downloads/manual/manual.html#submitting-patches
Signed-off-by: Julien Olivain <ju.o@free.fr>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Add -fPIC to cflags which is now required to build python-sdbus.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Drop no longer required python-typing-extensions runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
For the change log since 0.6.2, see:
https://git.yoctoproject.org/opkg/tree/CHANGELOG.md?h=v0.7.0#n8
Since the toolchain-external-bootlin version bump to 2024.05-1 the
TestOpkg fail due to a "spurious error check" fixed in opkg 0.7.0 [1].
With toolchain-external-bootlin 2024.02-1 (gcc-12) and opkg 0.6.2:
opkg install example-snmpd-package_1.0_arm.ipk
Installing example-snmpd-package (1.0) on root.
Configuring example-snmpd-package.
Starting SNMP daemon: OK
echo $?
0
With toolchain-external-bootlin 2024.05-1 (gcc-13) and opkg 0.6.2:
opkg install example-snmpd-package_1.0_arm.ipk
echo $?
255
The new gcc-13 seems to be confused while compiling opkg 0.6.2
without the "spurious error check" fix [1]
With toolchain-external-bootlin 2024.05-1 (gcc-13) and opkg 0.7.0:
opkg install example-snmpd-package_1.0_arm.ipk
Installing example-snmpd-package (1.0) on root.
Configuring example-snmpd-package.
Starting SNMP daemon: OK
echo $?
0
Keep new ACL and XATTRS support introduced in opkg 0.6.3 disabled.
Update opkg to the new upstream url [2].
[1] https://git.yoctoproject.org/opkg/commit?id=b5cc53d56e381803d3f55019254ab7d608160ae1
[2] https://github.com/openembedded/openembedded-core/commit/6ff8b43e08840582ee8d88261cbaffd33c2304f9
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/8199992571
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[Julien: add link to change log, reindent OPKG_CONF_OPTS]
Signed-off-by: Julien Olivain <ju.o@free.fr>
mender_x86_64_efi_defconfig started failing to build since 2024.08 in
our Gitlab-ci since the board/mender/x86_64/post-image-efi.sh is
calling support/scripts/genimage.sh with the host default shell.
There is no problem if the default shell is bash but our docker
image uses dash as default shell. Since support/scripts/genimage.sh
is actually a bash script it's not going to work if bashisms are used:
support/scripts/genimage.sh: 57: Syntax error: redirection unexpected
Indeed bashisms have been added recently in
support/scripts/genimage.sh by the commit introducing bmap image
support [1].
Remove "sh" before support/scripts/genimage.sh and rely on
"/usr/bin/env bash" to find the bash interpreter.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/8233226891
[1] 6889056f1e
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
This patch adds a basic support for the Bluefied3 board from
Mellanox/NVIDIA:
- https://www.nvidia.com/en-us/networking/products/data-processing-unit/
Brief summary of the board features:
- multicore ARM
- 16 Core ARM Processor
- DDR4: 16GB/32GB
- 2x embedded CX7
Signed-off-by: Vincent Jardin <vjardin@free.fr>
Reviewed-by: Julien Olivain <ju.o@free.fr>
[Julien:
- remove add-custom-hashes from the commit log
- add link for upstream kernel hashes
- check hash with pgp
- reflow the readme.txt
- regenerated defconfig with make savedefconfig]
Signed-off-by: Julien Olivain <ju.o@free.fr>
There is a regression in exfatlabel since exfatprogs 1.2.5.
exfatlabel tool error out when we try to set a new volume serial or
label.
exfatlabel /dev/sda1 "new label"
exfatlabel -i /dev/sda1 0x12345678
Error out only if too few argument is given, ignore additional
arguments.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/8199992419
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[Julien: reword the commit log one liner]
Signed-off-by: Julien Olivain <ju.o@free.fr>
TestPythonPy3MagicWormhole runtime test is currently broken due to
missing python-setuptools dependency.
wormhole-mailbox server fail to start with:
File "/usr/lib/python3.12/site-packages/wormhole_mailbox_server/server_tap.py", line 11, in <module>
File "/usr/lib/python3.12/site-packages/wormhole_mailbox_server/database.py", line 5, in <module>
ModuleNotFoundError: No module named 'pkg_resources'
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Currently the test TestPythonTwisted is not broken [1] since it doesn't
test all modules provided by python-twisted package.
But TestPythonTwisted should have failed due to missing xml in
twisted/web module.
Due to this, TestPythonPy3MagicWormhole runtime test is currently
broken.
Add missing python3-xml dependency and update
sample_python_twisted.py to load twisted/web that uses xml
module.
Fixes (partially due to missing python setuptool in
python-magic-wormhole-mailbox-server):
https://gitlab.com/buildroot.org/buildroot/-/jobs/8199992646
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Commit [1] removed virtio-blk-device,drive=hd0 from the Qemu command
line since RISC-V virt target now define a default type for block
devices (virtio) [2].
While it's was working as expected using
qemu_riscv{32,64}_virt_defconfig, it doesn't work for nommu variant.
Without "-device virtio-blk-device,drive=hd0", the virtio block device
virtio0 is missing in dmesg:
Expected dmesg log:
virtio_blk virtio0: 1/0/0 default/read/poll queues
virtio_blk virtio0: [vda] 122880 512-byte logical blocks (62.9 MB/60.0 MiB)
Unlike qemu_riscv{32,64}_virt_defconfig, mmu variant doesn't use
opensbi (-bios none) and disable mmu (-cpu rv{32,64},mmu=off)
from the qemu command line...
Adding back "-device virtio-blk-device,drive=hd0" seems to help Qemu
to enable the virtio block device for nommu target.
This partially revert commit [1].
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/8233227503 (qemu_riscv32_nommu_virt_defconfig)
https://gitlab.com/buildroot.org/buildroot/-/jobs/8233227509 (qemu_riscv64_nommu_virt_defconfig)
[1] dba41736da
[2] https://gitlab.com/qemu-project/qemu/-/commit/4406ba2b5efce6af64905f827ca244f699db8170
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
The patch bumps U-Boot to version 2024.10. The new version has added EFI
Capsule support, which depends on GnuTLS, thus requiring the activation of
BR2_TARGET_UBOOT_NEEDS_GNUTLS.
Tested on beaglebone black.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The rootfs partition is the first partition, not the second one: the
Grub configuration file already contains root=/dev/sda1 by default,
and it should be changed to root=/dev/vda1 is Qemu emulation is used.
Signed-off-by: Cherniaev Andrei <dungeonlords789@naver.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
checksec-2.7.1.tar.gz archive was replaced or regenerated by upstream
sometime between the 22 September 2024 [1] and the 29 September 2024
[2].
diffoscope report no changes in extracted files exept a different
top directory name (checksec.sh-2.7.1/checksec-2.7.1):
--- checksec-2.7.1.tar.gz a0d7a444d4603fb3d62fa25ef678e544ef39fa7b3c9bd5d22f1a8c526152cdde
+++ checksec-2.7.1.tar.gz eba0616f4033385d6093608a2a2aad3c2debb847d6778c87346f89c80946684f
Files identical despite different names
--- checksec-2.7.1/ChangeLog
+++ checksec.sh-2.7.1/ChangeLog
Use the git hash of the 2.7.1 release to use a different archive name
than the checksec-2.7.1.tar.gz archive previously released.
[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/7888799855
[2] https://gitlab.com/buildroot.org/buildroot/-/jobs/7948006849
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7948006849
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bumps to the latest `libspdm 3.5.0` release, this release introduces the
optional SPDM 1.3 `GET/SET_KEY_PAIR` support. Which requires an integrator
to support additional functionality implemented at link time. Leave this
disabled by default as it is optional and so that it does not break build
compatibility with integrators.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The systemd service deployed to the target is derived from an example
hardcoded for the /usr/local/sbin/ path, but we install sshguard at
/usr/sbin/. Thus, by default we get this error message:
$ journalctl -b -u sshguard.service -f
systemd[1]: Started SSHGuard - blocks brute-force login attempts.
(sshguard)[612]: sshguard.service: Unable to locate executable '/usr/local/sbin/sshguard': No such file or directory
(sshguard)[612]: sshguard.service: Failed at step EXEC spawning /usr/local/sbin/sshguard: No such file or directory
systemd[1]: sshguard.service: Main process exited, code=exited, status=203/EXEC
systemd[1]: sshguard.service: Failed with result 'exit-code'.
systemd[1]: sshguard.service: Scheduled restart job, restart counter is at 5.
systemd[1]: sshguard.service: Start request repeated too quickly.
systemd[1]: sshguard.service: Failed with result 'exit-code'.
systemd[1]: Failed to start SSHGuard - blocks brute-force login attempts.
Fix up the path in the service after the $(INSTALL) command has run.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In the current systemd package, EFI support is tied to enabling
systemd-boot, but there are some use cases where EFI support is
desired, independently of systemd-boot, for example to mount
automatically efivarfs in /sys/firmware/efi/efivars.
This commit therefore adds a separate option to enable EFI support.
Signed-off-by: Guillaume GC. Chaye <guillaume.chaye@zeetim.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch fixes a regression [1] introduced in ntpd 4.2.8p18 [2].
ntpd[200]: Listen normally on 3 lo [::1]:123
ntpd[200]: bind(20) AF_INET6 [fe80::bf3d:254d:dee0:d345%3]:123 flags 0x811 failed: Cannot assign requested address
ntpd[200]: unable to create socket on enp0s3 (4) for [fe80::bf3d:254d:dee0:d345%3]:123
ntpd[192]: daemon control: got EOF
ntpd[192]: daemon child died with signal 11
systemd[1]: ntpd.service: Control process exited, code=exited, status=70/SOFTWARE
systemd[1]: ntpd.service: Failed with result 'exit-code'.
systemd[1]: Failed to start Network Time Service.
If the IPv6 link-local interface was not ready for binding on the first
attempt, ntpd would segfault in update_interfaces(). The segfault would
only occur when ntpd was started as part of the boot sequence. Most
- but not all - boots were affected. Evidently it could happen that the
timing of ntpd's start up was delayed enough that the IPv6 link-local
interface was ready for the bind() call when it was first issued by
open_socket() via create_interface().
[1]: https://bugs.ntp.org/show_bug.cgi?id=3928
[2]: https://bugs.ntp.org/show_bug.cgi?id=3913
Signed-off-by: TIAN Yuanhao <tianyuanhao3@163.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
when pam_lastlog.so is not installed login issues an error
that it is not able to load it.
Hence only enable the entry when pam_lastlog.so is installed.
Fixes:
login[649]: PAM unable to dlopen(/lib/security/pam_lastlog.so): /lib/security/pam_lastlog.so: cannot open shared object file: No such file or directory
login[649]: PAM adding faulty module: /lib/security/pam_lastlog.so
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Ethernet MAC address of the Acqua board is stored in an onboard
EEPROM. Its location is described in the device tree as:
eeprom@58 { // NVMEM node
// EEPROM parameters...
eth0_addr: eth-mac-addr@9A { // NVMEM cells
reg = <0x0 0x06>;
};
};
Since Linux 6.5, defining NVMEM cells this way, as direct children of
the NVMEM node, is deprecated. It is instead recommended to wrap the
cells inside a "fixed-layout" node.
The older, deprecated syntax is still supported on Linux 6.6. Since
Linux 6.7 (commit 2cc3b37f5b6d: "nvmem: add explicit config option to
read old syntax fixed OF cells") however, it is only supported by
selected NVMEM drivers. It is not supported by the at24 driver used to
access the Acqua's onboard EEPROM.
Update the device tree to the new, recommended, syntax. This makes it
work with newer kernels, while preserving compatibility with the
currently used 6.6.30.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit
a39e0b95e1 ("package/qt6/qt6base: add
support for concurrent module"), we have an explicit option that
enables/disables concurrent support, so it no longer makes sense to
explicitly disable it unconditionnally first.
Signed-off-by: Hannah Kiekens <hannah.kiekens@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The homepage has moved, the previous one links to the new URL.
Signed-off-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
[yann.morin.1998@free.fr: split into its own patch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, goi depends on cairo.
So far, this would not cause any issue, but once we bump libglib2 and
goi, that would cause a circular dependency chain, where goi would
depend on cairo, cairo on libglib2, and libglib2 back on goi...
However, in goi, cairo is only needed to build some tests, and thus we
do not need that dependency, even before we update goi+libglib2.
Thanks to Fiona for helping sorting the issue out.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Adam Duskett <adam.duskett@amarulasolutions.com>
Cc: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch brings package/chrony/S49chronyd in line with the start
script standards. Note that users will need to update the location of
any script config from /etc/default/chrony to /etc/default/chronyd.
One deviation from the standard remains (and thus the check-package
override): The PID file is placed in /var/run/chrony/$DAEMON.pid. This
is necessary because chronyd drops privileges, and would not be able
to delete the PID file from root-owned /var/run on shutdown.
Signed-off-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The option has been renamed, so add an entry in the
Config.in.legacy file for the old option name.
Signed-off-by: Scott Fan <fancp2007@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the 'offset' property in genimage.cfg to align the boot partition on
1 MiB boundary. It is clearer than fixing the size of the previous
u-boot partition.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Mattia Narducci <mattianarducci1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In Qt 6.8.0 this package will be replaced by Qt Graphs. But since it
was requested on the mailinglist we add it now. It will be replaced by
qt6graphs when Qt 6.8.0 is out.
Signed-off-by: Roy Kollen Svendsen <roykollensvendsen@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When bumping the Linux kernel version I inadvertently removed the pinned
linux-headers version from the defconfig which can break the build if
the default kernel version is not v6.10. Pin linux-headers to the
current am62ax-sk kernel version.
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Qemu 9.1.0 removed support for NIOS2 emulation, so we can't
no longer test it when updating Qemu zo 9.1.0.
Furthermore it seems that NIOS2 architecture will be soon
deprecated in the toolchain support.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Qemu 9.1 recently fixed the RISC-V virt target by adding the missing
default type for block devices [1].
But the qemu command line we use for RISC-V virt is slightly incorrect:
-drive file=rootfs.ext2,format=raw,id=hd0 -device virtio-blk-device,drive=hd0
With Qemu 9.1, this command line now rejected since it conflict with
the new default bus:
qemu-system-riscv64: -drive file=rootfs.ext2,format=raw,id=hd0: Drive 'hd0' is already in use because it has been automatically connected to another device (did you need 'if=none' in the drive options?)
Since we are currently still using Qemu 9.0, apply the suggested change by
adding 'if=none'.
Note: '-drive file=rootfs.ext2,format=raw,id=hd0' can be removed
in a followup patch after the qemu version bump 9.1 is merged.
[1] https://gitlab.com/qemu-project/qemu/-/commit/4406ba2b5efce6af64905f827ca244f699db8170
[Romain: rework the commit log]
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When compiling jailhouse with BR2_PACKAGE_JAILHOUSE_HELPER_SCRIPTS=y,
build is failing with error:
Traceback (most recent call last):
File "/buildroot/output/build/jailhouse-e57d1eff6d55aeed5f977fe4e2acfb6ccbdd7560/setup.py", line 18, in <module>
setup(name="pyjailhouse", version=version,
File "/buildroot/output/host/lib/python3.12/site-packages/setuptools/__init__.py", line 108, in setup
return distutils.core.setup(**attrs)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...
File "/buildroot/output/host/lib/python3.12/sysconfig.py", line 549, in _init_posix
_temp = __import__(name, globals(), locals(), ['build_time_vars'], 0)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
ValueError: Empty module name
This is due to a missing dependency on the target python3 package.
Jailhouse Python scripts are using setuptools with host-python3 which
reads its sysconfig data from the target-python3. See:
https://gitlab.com/buildroot.org/buildroot/-/blob/2024.08.1/package/pkg-python.mk?ref_type=tags#L33
If the target python3 is not installed, this get expanded as an empty
string, leading to this "ValueError: Empty module name" error.
Pure Python packages which are using the python-package infrastructure
usually get this dependency automatically from:
https://gitlab.com/buildroot.org/buildroot/-/blob/2024.08.1/package/pkg-python.mk?ref_type=tags#L295
Here, the jailhouse package rather uses the generic-package
infrastructure, then installs the Python scripts (if enabled) with
dedicated macros. This is why the target python3 is needed.
This commit fixes the issue by adding this missing dependency.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When compiling oath-toolkit with PSKC support, with:
BR2_PACKAGE_OATH_TOOLKIT=y
BR2_PACKAGE_OATH_TOOLKIT_PSKC=y
Build is failing on hosts without libxml2, with output:
make[5]: Entering directory '/buildroot/instance-0/output-1/build/oath-toolkit-2.6.12/libpskc/schemas'
create -noout \
--add "system" "urn:ietf:params:xml:ns:keyprov:pskc" \
"/buildroot/instance-0/output-1/build/oath-toolkit-2.6.12/libpskc/schemas/pskc-schema.xsd" \
--add "system" "http://www.w3.org/TR/2002/REC-xmldsig-core-20020212/xmldsig-core-schema.xsd" \
"/buildroot/instance-0/output-1/build/oath-toolkit-2.6.12/libpskc/schemas/xmldsig-core-schema.xsd" \
--add "system" "http://www.w3.org/TR/2002/REC-xmlenc-core-20021210/xenc-schema.xsd" \
"/buildroot/instance-0/output-1/build/oath-toolkit-2.6.12/libpskc/schemas/xenc-schema.xsd" \
tmp
/bin/sh: line 1: create: command not found
make[5]: [Makefile:1267: catalog-pskc.xml] Error 127 (ignored)
The build needs the "xmlcatalog" command, provided the host-libxml2
package. The previous error log does not show the "xmlcatalog" because
it is not found by autoconf, then substituted by an empty string (we
only see its arguments).
This commit fixes the issue by adding this missing dependency.
Fixes:
https://autobuild.buildroot.org/results/d22b8d9ba1f8a948125b4f9713720d070e208799/
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is bugfix release of stable libmdbx branch.
The most significant fixes since v0.12.10 (the previous version pinned to
buildroot):
- Fixed the possibility of `SIGSEGV` inside the `coherence_check()` after
changing the geometry by another process with an increase in the upper
DB size above the previous in-process limit.
- Fixed cursor(s) handling opened in parent transactions and closed before
the completion of nested/child transactions. In such case, closed
cursors were "resurrected", which led to a leak of memory allocated for
such cursors.
- Fixed a possibility of `SIGSEGV` when enabling logging of the
`MDBX_LOG_TRACE` level in debug builds.
- Correction of the missing `TXN_END_EOTDONE` in the case the start of
a reading transaction fails. The mentioned bit-flag was missing in the
transaction destruction/shutdown path on error its launch. Because of
this, an attempt was made to destroy the cursors, which led to crash
debug builds, since the corresponding array is intentionally filled
with poison pointers.
- Modification of `mdbx_close_by()` to return an error when trying to
close the dbi descriptor of a table created and/or modified in a
still-running transaction. Such premature closure of the descriptor is
an incorrect use of the API and a violation of the contract/preconditions
formulated in the description of `mdbx_close_dbi()`.
However, instead of returning an error, an incorrect closure of the
descriptor was performed, which could lead to the creation of a table
with an empty name, leakage of database pages and/or corruption of a
b-tree structure (wrong reference to the root of a table).
The complete ChangeLog:
https://gitflic.ru/project/erthink/libmdbx/blob?file=ChangeLog.md
Signed-off-by: Леонид Юрьев (Leonid Yuriev) <leo@yuriev.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
in e97fc89e7b a dependency on host-gcc >= 7 was added but
for the comment the condition was not correctly inverted.
Fixes: e97fc89e7b ("package/protobuf-c: bump to version 1.5.0")
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add new python-propcache runtime dependency.
Add new host-python-cython build dependency.
Add new host-python-expandvars build dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y,
BR2_LINUX_KERNEL_IMAGE_TARGET_NAME is supposed to be non-empty. But in
the context of genraconfig, we don't know to what value
BR2_LINUX_KERNEL_IMAGE_TARGET_NAME can be set, so let's avoid cases
where BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y. By dropping this option,
kconfig will revert back to the default image format for the selected
architecture.
Fixes:
http://autobuild.buildroot.net/results/1d104a051c83bb31e98565369a2ec7badfa21eca/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Extend the set of options enabled when BR2_PACKAGE_WPA_SUPPLICANT_WPA3
by also enabling:
- CONFIG_SUITEB: WPA3-Enterprise
- CONFIG_SUITEB192: WPA3-Enterprise (SuiteB 192 bits security)
While at it, document the options that are enabled.
Signed-off-by: Guillaume GC. Chaye <guillaume.chaye@zeetim.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The versioning scheme of this package is not trivial: the PyQt5-sip
version number does not corresponds to the actual version tag name in
its Python-SIP source repository. For that reason, this commit adds a
comment explaining this peculiar mapping. This comment will help, in
future maintenance tasks.
To better understand the upstream changes in this package explained in
this commit log, it is worth mentioning that:
- PyQt5-sip 12.13.0 was generated with Python-SIP 6.7.12, and
- PyQt5-sip 12.15.0 was generated with Python-SIP 6.8.6.
The package license has changed to BSD-2-Clause, in upstream commits:
https://github.com/Python-SIP/sip/commit/0ba3b233ec8ed7f22f2f2f950b64f61b50ddfc00https://github.com/Python-SIP/sip/commit/4dde1491f7b8ace15833cffb86bee82d60683968https://github.com/Python-SIP/sip/commit/f32039b07c47280039dcdcd0f8a2b1323fda912e
This commit updates the _LICENSE and _LICENSE_FILES macro
accordingly. The license hash file is also updated. While at it, this
commit also adds the MD5 hash published upstream.
This commit also introduces minor improvements to better follow
Buildroot package conventions:
- the .mk file header is changed to lower case,
- hash file comments are updated,
- the locally calculated license file hash is changed from MD5 to
SHA256.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Enable Andes SPI_burn tool for updating buildroot generated
bootloader and device-tree blob onto flash memory.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Up until now cpu clock gets initialized at 384 MHz, which is
the highest supported cpu clock.
Recent A20 batches show an increased percentage of modules
reacting very sensitive to operating conditions outside the
specifications.
The cpu dies very shortly after PLLs, core frequency or cpu
voltage are missconfigured. E.g.:
- uboot SPL selects 384 MHz as cpu clock which requires a cpu
voltage of at least 1.1 V.
- Linux CPU Frequency scaling with most sun7i dts will reduce
cpu voltage down to 1.0 V.
- When intiating a reboot or reset from linux the cpu voltage
may keep the 1.0 V configuration and the cpu dies during SPL
initialization.
Therefore reduce cpu clock at uboot SPL initialization down
to 144 MHz from 384 MHz.
Use patch until KConfig option in uboot becomes available.
Signed-off-by: Ludwig Kormann <ludwig.kormann@ict42.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Generating Bitcoins to an address can take longer than the current
timeout, on slow runners. This commit fixes this issue by increasing
the timeout on specific commands. This issue was also observed more
frequently on newer bitcoin-core version 28.0.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7782083081
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit: https://git.postgresql.org/gitweb/?p=postgresql.git;a=commit;h=52afe563206e753f4c45c014fee2459ad0855826
postgrsql fails to build with toolchains without threads support:
misc.c: In function 'ecpg_gettext':
misc.c:541:51: error: 'PTHREAD_MUTEX_INITIALIZER' undeclared (first use in this function)
541 | static pthread_mutex_t binddomain_mutex = PTHREAD_MUTEX_INITIALIZER;
| ^~~~~~~~~~~~~~~~~~~~~~~~~
misc.c:541:51: note: each undeclared identifier is reported only once for each function it appears in
misc.c:552:24: warning: implicit declaration of function 'pthread_mutex_lock' [-Wimplicit-function-declaration]
552 | (void) pthread_mutex_lock(&binddomain_mutex);
| ^~~~~~~~~~~~~~~~~~
misc.c:569:24: warning: implicit declaration of function 'pthread_mutex_unlock' [-Wimplicit-function-declaration]
569 | (void) pthread_mutex_unlock(&binddomain_mutex);
| ^~~~~~~~~~~~~~~~~~~~
Option "--disable-thread-safety" will be dropped in PG 17, so
this patch is needed only for 16.x branch.
Fixes: 73dd1d6b96 ("package/postgresql: security bump version to 16.3")
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update this package to the same NXP software release as the ls1046a
board. The only upstream change was to rename the license file.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update Linux, U-Boot, and TF-A to the latest versions used by NXP's
Yocto project.
Drop the patches from board/freescale/common as the TF-A patches are
upstream.
Switch the Linux defconfig to the default ARM64 defconfig, as is done by
the NXP Yocto build.
The updated Linux kernel increases the rootfs size to 122MB so we bump
the rootfs size slightly to match.
See: https://github.com/nxp-qoriq/yocto-sdk/tree/scarthgap
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Lws now features optional asynchronous, ie, nonblocking recursive DNS
resolution done on the event loop, enable `-DLWS_WITH_SYS_ASYNC_DNS=1`
at cmake to build it in.
The default libc name resolution is via libc `getaddrinfo()`, which is
blocking, possibly for quite long periods (seconds). If you are
taking care about latency, but want to create outgoing connections,
you can't tolerate this exception from the rule that everything in
lws is nonblocking.
Lws' asynchronous DNS resolver creates a caching name resolver
that directly queries the configured nameserver itself over UDP,
from the event loop.
https://libwebsockets.org/lws-api-doc-main/html/md_READMEs_2README_8async-dns.html
Signed-off-by: Bart Van Severen <bart.vanseveren@barco.com>
Signed-off-by: Thomas Devoogdt <thomas.devoogdt@barco.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This fixes nethogs being built with the (mangled) buildroot version
name from the outer buildroot git repo.
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch bumps the Linux kernel to version 6.1.112. The size of xipImage
has increased by only 54 bytes (1669958 bytes compared to 1669904 in
version 6.1.98).
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The package homepage http url redirects to https. This commit updates
this url to directly use https.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The package _SITE url only contains the latest version at a given point
in time. When a new version is published, it is replacing the old one.
This issue was not detected because the archive was downloaded from the
sources.buildroot.org backup mirror, when the primary source became
unavailable.
Since commit 559bb33ae "support/testing: do not use s.b.o" [1], the
runtime test infrastructure is disabling this backup mirror. This
makes the nmap runtime test failing [2], which is using liblinear as
a dependency.
The liblinear package author confirmed in a private email that all the
releases, including the latest version, are all kept in the "oldfiles"
directory.
This commit fixes this download issue by updating the _SITE url to that
location. While at it, this commit also change the url to use https
(since the http equivalent redirects to https).
Fixes:
- [2]
[1] https://gitlab.com/buildroot.org/buildroot/-/commit/559bb33ae71dd2358ca2314ccb24b56cc3809fc1
[2] https://gitlab.com/buildroot.org/buildroot/-/jobs/7948008007
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This fixes the following runtime error when importing PyQt5 in python:
from PyQt5.QtCore import *
ModuleNotFoundError: No module named 'PyQt5.sip'
The problem was likely triggered by the atomic upgrade from 5.7 to
5.15 in b36ce7e. This commit is part of the 2022-2024 LTS.
Signed-off-by: Ralf Dragon <hypnotoad@lindra.de>
Tested-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Disable lsfd for uClibc-ng until 1.0.51 is out.
Some files now are licensed under MIT.
README.licensing was changed, MIT was added, GPL-2.0 was
renamed to GPL-2.0-only.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The iotools package provides a set of simple command line tools which
allow access to hardware device registers. Supported register interfaces
include PCI, IO, memory mapped IO, SMBus, CPUID, and MSR. Also included
are some utilities which allow for simple arithmetic, logical, and other
operations.
If you ever have to debug hardware, you could probably use these tools.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
OATH Toolkit provide components to build one-time password
authentication systems. It contains shared C libraries,
command line tools and a PAM module. Supported technologies
include the event-based HOTP algorithm (RFC 4226), the
time-based TOTP algorithm (RFC 6238), and Portable Symmetric
Key Container (PSKC, RFC 6030) to manage secret key
data. OATH stands for Open AuTHentication, which is the
organization that specify the algorithms.
https://www.nongnu.org/oath-toolkit/
Signed-off-by: Julien Olivain <ju.o@free.fr>
Reviewed-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Version environment variable VERSION=$(VERSION) is set in the top level
Makefile of the sysvinit:
$(MAKE) VERSION=$(VERSION) -C src $@
Build command SYSVINIT_BUILD_CMDS doesn't use the top level Makefile, but
src/Makefile instead without setting the VERSION variable, which leads to
undefined VERSION macro in src/init.c.
Add VERSION=$(SYSVINIT_VERSION) to SYSVINIT_MAKE_OPTS to make the VERSION
environment variable available in the src/Makefile.
Signed-off-by: Cody Green <cody@londelec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The check-package tool requires some PyPi package to be installed before
it can run. This is typically done by manually installing them into the
user's global Python environment or setting up a virtual environment,
then manually installing each dependency.
Python recently defined a format for managing script dependencies as
inline metadata[1]. This can be used with the `uv` tool to run a Python
script and automatically install the minimum required version of Python
and PyPi dependencies.
With this change, it's now possible to run check-package with
uv run -s ./utils/check-package
Note that, because check-package does not have the '.py' file extension
we must specify the `-s` or `--script` argument. That argument was added
very recently in release 0.4.19[2].
I set the minimum python to 3.9 as that is the oldest version still
supported[3]. I verified 3.9 works by running
uv run -p 3.9 -s ./utils/check-package `git ls-tree -r --name-only HEAD` --ignore-list=.checkpackageignore
[1] https://packaging.python.org/en/latest/specifications/inline-script-metadata/#script-type
[2] https://github.com/astral-sh/uv/releases/tag/0.4.19
[3] https://devguide.python.org/versions/
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Call out the requirements to run check-package and mention that Docker
can be used to run check-package without installing dependencies.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changes between 3.2.1 and 3.3.0:
- Fix some compile warnings in Visual Studio by @Ono-Sendai in #188
- Set permissions for github workflows by @joycebrum in #191
- Add flags to control trailing decimal and zero in exponent form when
input has one significant digit by @ianmcook in #195
See https://github.com/google/double-conversion/releases/tag/v3.3.0
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
When compiling coreutils with uClibc-ng, build is failing with error:
In file included from lib/mcel.c:3:
lib/mcel.h: In function 'mcel_scan':
lib/mcel.h:226:21: error: 'mbstate_t' has no member named '__count'
226 | mbstate_t mbs; mbs.__count = 0;
| ^
The problem was reported by Waldemar Brodkorb in:
https://lists.gnu.org/r/bug-gnulib/2024-08/msg00130.html
This commit adds a package patch that modifies mcel_scan to avoid
treating uClibc-ng as if it were glibc, resolving compatibility
issues.
Specifically, uClibc-ng was incorrectly treated like glibc in the code,
which led to incorrect assumptions about the mbstate_t initialization.
Fixes:
- https://autobuild.buildroot.org/results/34f4e23e325a03ab37fd5a0a564780b9e0d631cd/
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@yoseli.org>
[Julien:
- slightly reworded the commit log
- fixed package patch encoding
- add the Upstream: tag in package patch
- add the Fixes: link in commit log
]
Signed-off-by: Julien Olivain <ju.o@free.fr>
When compiling jailhouse with BR2_PACKAGE_JAILHOUSE_HELPER_SCRIPTS=y,
installation is failing with error:
/bin/sh: -c: line 1: syntax error near unexpected token ')'
This error is due to an extra ')' character in the macro
JAILHOUSE_INSTALL_HELPER_SCRIPTS.
This commit fixes this typo.
Signed-off-by: Raimundo Sagarzazu <rai.sagarzazu@outlook.com>
[Julien: reworded the commit log]
Signed-off-by: Julien Olivain <ju.o@free.fr>
Add new host-python-setuptools build dependency.
Set --skip-dependency-check build option to bypass overly strict
setuptools version requirement.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch fixes the following error:
arpd.c:442:17: error: initialization of 'int' from 'void *' makes integer from pointer without a cast [-Wint-conversion]
442 | NULL, 0,
The analysis of socket.h [1] containing the msghdr structure shows that
it has been modified with the addition of padding fields, which cause
the compilation error:
struct msghdr {
void *msg_name;
socklen_t msg_namelen;
struct iovec *msg_iov;
#if __LONG_MAX > 0x7fffffff && __BYTE_ORDER == __BIG_ENDIAN
int __pad1;
#endif
int msg_iovlen;
#if __LONG_MAX > 0x7fffffff && __BYTE_ORDER == __LITTLE_ENDIAN
int __pad1;
#endif
void *msg_control;
#if __LONG_MAX > 0x7fffffff && __BYTE_ORDER == __BIG_ENDIAN
int __pad2;
#endif
socklen_t msg_controllen;
#if __LONG_MAX > 0x7fffffff && __BYTE_ORDER == __LITTLE_ENDIAN
int __pad2;
#endif
int msg_flags;
};
The use of designated initializers allows the issue to be fixed.
[1] iproute2/host/mips64-buildroot-linux-musl/sysroot/usr/include/sys/socket.h
Fixes:
- http://autobuild.buildroot.org/results/e4cdfa38ae9578992f1c0ff5c4edae3cc0836e3c
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The previous download URL does not contain the most recent versions, so
it was necessary to change it to bump to the current version.
No license file has been changed.
[Romain:
- remove 3.0.10 patches
- Update XENOMAI_AUTORECONF comment]
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
- Bump Linux kernel to 6.10.12 and add the dependency on host-python3.
- Bump U-Boot to 2024.07.
- Bump TF-A to v2.11. Remove the stdout patch, which is present
upstream. Remove our hash file now that the arm-trusted-firmware
package centralises those.
- Bump FVP to 11.27.19 in the documentation.
- Convert to `make savedefconfig' format.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
remove merged patch
diff README:
-Perl is Copyright (C) 1993 - 2024 by Larry Wall and others.
+Perl is Copyright (C) 1993 - 2023 by Larry Wall and others.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
osm2pgsql now use std::filesystem instead of boost::filesystem. So
drop BR2_PACKAGE_BOOST_SYSTEM, BR2_PACKAGE_BOOST_FILESYSTEM
dependencies and set BR2_TOOLCHAIN_GCC_AT_LEAST_8.
Lua is not optional now. So add lua or luajit as dependencies.
Legacy Proj interface (Proj 4) was dropped and option was renamed
from USE_PROJ_LIB to WITH_PROJ
Release-notes: https://github.com/openstreetmap/osm2pgsql/releases/tag/2.0.0
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
I still follow Buildroot development and use it for some personal
projects, but no longer have the time to be an active contributor.
Some of these are important defconfigs and packages to have up-to-date
in Buildroot, and mostly other developers have been doing that work, so
I am dropping them so that someone from the active contributors can be
the maintainer contact for them.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Move Logilin to past sponsors, update details about Smile sponsoring
and Armadeus sponsoring, and likewise for a number of past sponsors.
The text about Smile as a past sponsor is reworded/reduced so that it
stills fits in the size of the block in a reasonable way.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Updating the hash of the WHENCE file, due to firmware additions and
firmware changes, but no changes to the redistribution/licensing
conditions.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the new hatch setup type which automatically pulls in the
host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As we have many python packages using the hatch(hatchling) build
system we should add a setup type for it so that we don't have to
manually specify the host-python-hatchling dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This vulnerability only affects libcurl deployments in Nest products
because of incorrect use.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When I initially made the CVE cells collapsible, I neglected to
count the unsure CVEs. This patch adds unsure CVEs to the cell collapsing
calcualation to ensure that cells with lots of unsure CVEs actually get collapsed.
This patch also removes the "+ 1" from the cve_total calculation,
which fixes the cve_total being off-by-one.
I'm not sure *why* I did that in the first place.
demo:
https://sen-h.codeberg.page/pkg-stats-demos/@pages/add-unsure_cves-to-cve_total-calc.html
Signed-off-by: Sen Hastings <sen@hastings.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
At the moment, it is difficult to combine brmake with docker-run.
`docker-run brmake ...` doesn't work because our docker image doesn't
have unbuffer. In addition, inside the container the timezone is UTC,
but you probably want the timestamps added by brmake to be in local
time. Therefore, it's better to have the call to docker-run nested
inside brmake.
Currently, brmake doesn't have any way to pass parameters, all of "$@"
is passed unchanged to the `make` invocation. Thus, there is no
established way to pass in the option whether or not to use docker. We
choose to use an environment variable to pass in the option. The
convention is that such a buildroot-specific environment variable should
start with BR2_, so we choose BR2_DOCKER.
Run make inside docker-run if the BR2_DOCKER environment variable is
set. Update utils/readme.txt (the only existing documentation of brmake)
with this information.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Having the uboot environment defined on the SD card allows the user to
use the uboot setenv and saveenv commands to make persistent changes
(e.g. to change the boot order, or to set a server IP for PXE boot).
Set the uboot-env partition type GUID to "U-Boot environment", see:
https://github.com/u-boot/u-boot/blob/v2024.10/doc/README.gpt#L288https://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs
and enable CONFIG_PARTITION_TYPE_GUID such that uboot will automatically
find the SD card partition to store/load the uboot environment to.
We need to mark the root partition as bootable, otherwise uboot will no
longer be able to boot the partition by default. (Most likely because
the root partition is now no longer the first partition on the device.)
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux to the latest release tag: linux4microchip+fpga-2024.09.1.
This includes the latest features and bug fixes. The main highlights
include a kernel version bump from v6.6.35 to v6.6.51 and a fix for the
Microchip mpfs-auto-update driver.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to latest release tag: linux4microchip+fpga-2024.09. This
includes the latest features and bug fixes.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds the integration of the Data Plane Development Kit (DPDK).
This commit does not enforce the use of UIO or VFIO kernel frameworks,
as DPDK's architecture supports userland memory mappings that do not require
these technologies. By maintaining this flexibility, DPDK can operate with
a broader range of hardware and software configurations.
Only the little endian targets are properly supported by DPDK. Big endian
was supported, mostly on Power8, but it has not been used for a while and
IBM is not strongly pushing any tests. Should big endian be supported
again, DPDK community will be welcoming any contributions.
Notes about license:
DPDK was released with the BSD-3-Clause license.
One network driver, the Google Virtual Ethernet (GVE) include files
under the MIT license. See [1] and [2].
There used to be GPL-2.0-only licensed kernel modules, but they got
removed in previous versions [K] [KNI], so Buildroot won't be used to compile
the GPL-2.0-only code.
There are also 2 files in "lib/eal/windows" under other licenses
(namely BSD-2-Clause, ISC and MIT) but they are parts of the Environment
Abstraction Library (EAL) for Microsoft Windows OS, it means they are
not used when compiling for the Linux targets of Buildroot.
The list of DPDK license exceptions is maintained at [2].
Add configuration options to enable DPDK examples and tests.
[1] https://git.dpdk.org/dpdk/tree/doc/guides/nics/gve.rst?h=v24.07
[2] https://git.dpdk.org/dpdk/tree/license/exceptions.txt?h=v24.07
[KNI] https://git.dpdk.org/dpdk/commit/?id=f78c100bc87119c6a94130a6689d773afdaa9d98
[UIO] https://git.dpdk.org/dpdk/commit/?id=56bb5841fd0608989101d933f091852a3126b4fe
[K] https://git.dpdk.org/dpdk-kmods/commit/?id=d16f3b44987be181b6effee139558a084eaf9f8c
Signed-off-by: Vincent Jardin <vjardin@free.fr>
Suggested-by: Julien Olivain <ju.o@free.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Julien Olivain <ju.o@free.fr>
Reviewed-by: Yann Morin <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle <arnout@mind.de>
Tested-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Since libcamera commit f513fd70ba1a ("subprojects: Drop leftovers of
pybind11"), merged before libcamera v0.1.0, libcamera has no longer
relied on an external subproject branch of pybind to build the python
bindings.
Provide a new package option to allow enabling the python bindings on
libcamera when python3 is available in the buildroot configuration.
Enabling the python bindings will select and bring in pybind as a
dependency.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
When building on an ARM64 build server, the build of
configs/ti_am62x_sk_defconfig fails when building the Cortex-R5
U-Boot, as it uses host-arm-gnu-toolchain, which assumes the host
machine is x86-64.
Use $(HOSTARCH) instead so that it can download the bare-metal
toolchain also provided by ARM for the ARM64 host architecture.
Signed-off-by: Bryce Johnson <bryce@redpinelabs.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The 6.10.x series is now EOL upstream, so drop the linux-headers option
and add legacy handling for it.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump Linux kernel to v6.10.14 and add the dependency on host python3.
- Bump U-Boot to v2024.10 and add the dependency on GnuTLS and
util-linux (for uuid).
- Bump TF-A to v2.11.
- Turn on hashes verification and add hashes for the Linux kernel and
U-Boot.
- Fix shellcheck warnings in the post-build script.
- Remove the related exceptions in .checkpackageignore.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Suniel Mahesh <sunil@amarulasolutions.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A new version of U-Boot has been released. Update to this latest version
to pull in the latest features and bug fixes
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The denx.de/wiki/U-Boot link now redirects to docs.u-boot.org/en/latest
Replace the link to the new location for the U-Boot documentation
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Newer uboot versions contain commit ebb0ad4eef0a ("arch: arm:
mach-rockchip: Kconfig: Enable BOOTSTD_FULL for RK3399 and RK3588"),
which enables BOOTSTD_FULL for RK3588, making it easier to figure
out issues with the bootflow, if any.
Also add the GnuTLS dependency which is needed for uboot 2024.10.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A bunch of new hardware has been enabled for rock5b in linux 6.11,
most notably USB3 host controller support, GPU support, cpufreq
support, and PCIe endpoint mode support.
Add the dependency on host python3 that is new since linux 6.10.
Also add the missing dependency on openssl (which has been needed for
a long time, since we are using arm64 defconfig, but only shows up as
an error if the host system doesn't have extract-cert installed.)
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We need to pass the --skip-dependency-check build option since
python-zope-interface uneccesarially restricts the maximum
setuptools version.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While at it:
- Turn on hashes verification and add a hash for the Linux kernel.
- Linux kernel needs host-python3; add it.
- Convert to `make savedefconfig' format.
- Fix shellcheck warnings in our post-image script and update
.checkpackageignore.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Erico Nunes <nunes.erico@gmail.com>
Cc: Dick Olsson <hi@senzilla.io>
Cc: Julien Olivain <ju.o@free.fr>
Reviewed-by: Julien Olivain <ju.o@free.fr>
[Julien: rebased the patch to resolve conflicts with commit
edc0a6b1a "configs: regenerate all defconfigs"]
Signed-off-by: Julien Olivain <ju.o@free.fr>
Commit b315dc5fbf (package/zabbix: bump version to 7.0.3) updated
zabix but forgot to check the license info, leading to legal-info failures.
Both files have changed - COPYING now specifies AGPL 3.0, so adjust hash and
license identifier. README is now just a oneliner stating 'Please refer to
README.md' (which also does not have any license clarifications), so just
drop it.
Fixes: b315dc5fbf (package/zabbix: bump version to 7.0.3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To provide an init process for containers if requested e.g. with
"docker run --init", Docker relies on tini to provide the init
binary. package/tini already provides the required
/usr/libexec/docker/docker-init symlink, the new option just selects
tini if enabled to prevent confusion over why docker-init is missing.
Signed-off-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 24cac9c4e6 "system: add tini as
init system" made BR2_PACKAGE_TINI depend on BR2_INIT_TINI. This is
incorrect: tini is not only needed when building a container image
using Buildroot, but also to run Docker containers on Buildroot
systems using another another init system, if Docker is configured to
provide an init process for the container (e.g. with "docker run
--init"). The tini package already provides the "docker-init" symlink
required for that.
Example error without tini installed:
$ docker run --rm -ti --init alpine
docker: Error response from daemon: exec: "docker-init": executable file not found in $PATH.
Signed-off-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Reviewed-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Migrate from setuptools to poetry build backend.
Drop no longer required python-pypng runtime dependency.
Drop no longer required python-typing-extensions runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some projects use pyproject.toml without setting a build backend, per
pep517 we should simply fallback to using setuptools when no build
backend is specified.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For a summary of changes since 8.0.2, see:
https://www.winehq.org/news/
This commit adds the sha512 hash published on the download site.
The LICENSE hash also changed, due to a year update.
This commit also adds new optional dependencies for:
xlib_libXfixes, ffmpeg, pcsc-lite, and wayland.
All new build options are disabled in HOST_WINE_CONF_OPTS:
ffmpeg, pcsc-lite, udev, wayland and xfixes.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Normally, two packages should never touch the same file. However, the
mender-grubenv package is a special case, as its sole purpose is to overwrite
the grub.cfg file.
As per-package directory building has no guarantee that the grub package is
rsynced to the target directory before the mender-grubenv package, this leads
to the possiblity that mender-grubenvs grub.conf file is overwritten with the
stock grub2 packages grub.conf file.
Instead of a MENDER_GRUBENV_INSTALL_I386_CFG and MENDER_GRUBENV_INSTALL_EFI_CFG
being part if MENDER_GRUBENV_INSTALL_IMAGES_CMDS, move them to
TARGET_FINALIZE_HOOKS. This guarantees that the grub.cfg provided by the
mender-grubenv package is installed after grub.conf provided by the grub2
package.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The imp module is deprecated as of python verison 3.12.
Refactor setuptools handling to remove monkeypatching hack and
instead do pep517 metadata generation and dependency resolution.
This is effectively done by implementing the minimal neccesary
pep517 frontend hooks needed for dependency resolution in scanpypi.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Tested-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Reviewed-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
[Arnout: add license info]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
For change logs since 2.0.16, see:
https://github.com/numactl/numactl/releases/tag/v2.0.18https://github.com/numactl/numactl/releases/tag/v2.0.17
This commit also removes the package patch, which was included in
numactl v2.0.17. Since this patch was modifying configure.ac, the
"NUMACTL_AUTORECONF = YES" directive is also removed. Finally, the
patch entry in the ".checkpackageignore" file is also removed.
This commit also adds an upstream patch, not yet in this release, which
fixes builds with Kernel header not providing the
set_mempolicy_home_node() system call.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a test that runs the dtc commandline tools. To test devicetree
compilation, we use an example devicetree from the dtc project. The
example source is GPL-2.0+ licensed.
Signed-off-by: Brandon Maier <brandon.maier@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
linux-pam 1.2.0 removed the use of yywrap, so the flex dependency is not
needed now (host-flex is still needed).
Fixes: #47
Signed-off-by: Damien Thébault <damien.thebault@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Drop patch which is no longer needed/applicable.
Drop no longer required python-hkdf runtime dependency.
Add new python-cryptography runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 174bf40fb520893a5ef69ef02c22aa232b56bd67 introduced the usage of
`flock -w` to prevent errors during concurrent access of the environment
(IE: When a process is editing an env and another is trying to restore it.)
As such, mender-grubenv now requires util-linux and the basic binaries
set, as the busybox flock does not provide the -w argument.
Other changes:
- The boot directory is now expected to be /boot instead of /boot/grub
- License hash changed for 2023 -> 2024 year date (see commit f54ecfb)
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The commit adds support for STM32F746G-DISCO board. The discovery kit is
a complete demonstration and development platform for STMicroelectronics
Arm Cortex-M7-core-based STM32F746NG.
Board support package includes the following components:
- mainline Linux kernel 5.15.165
- mainline U-Boot 2024.07
- default packages from buildroot
Link: https://www.st.com/en/evaluation-tools/32f746gdiscovery.html
Co-Developed-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Linux on ARM supports FDPIC binaries intended for use on no-MMU
systems. This patch enables support for building a toolchain that
produces FDPIC binaries, only for ARMv7-M platforms, for which FDPIC
binaries are relevant.
The target name for a FDPIC toolchain must be
arm-<vendor>-uclinuxfdpiceabi, which doesn't follow the standard
format and requires a special case.
Signed-off-by: Ben Wolsieffer <Ben.Wolsieffer@hefring.com>
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the introduction of ARM FDPIC support, we need to make sure that
the existing ARM FLAT external toolchains are not made
visible/available when ARM FDPIC is selected. This commit updates the
gen-bootlin-toolchains script to take this into account.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
During the hackathon in Vienna, it was decided [0] to stop requiring
annotated defconfig files, and that they should all be regenerated.
This commit does just that.
This is a mechanical change, achieved by running (the defcfg script is
repriducedc at the end of the commit log):
$ for cfg in configs/*_defconfig; do
./defcfg "${cfg##*/}" || break
done
Out of our 302 defconfig files, only 247 needed regenerating, which
means that about 1 in 5 was already not providing the requested
annotations.
To be noted: three defconfig files had duplicate definitions, which this
commit resolves:
nitrogen6sx_defconfig
nitrogen7_defconfig
olimex_a33_olinuxino_defconfig
warning: override: reassigning to symbol BR2_PACKAGE_HOST_UBOOT_TOOLS
[0] https://elinux.org/Buildroot:DeveloperDaysELCE2024#Rules_for_defconfigs
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
====
Below is the script to reproduce the commmit. What it does is regenerate
the configuration first, then applies a patch to update kernel headers
to 3.11, and then recalls the defconfig again, and finally verifies that
the 3.11 headers are not selected (and ignores whether the latest are
selected or not): we want to catch whether defconfig that were using
3.10, currently the latest we support, would stioll get those headers
after we regeerate those.
--->8------>8------>8------>8------>8---
#!/bin/sh
cfg="${1}"
git checkout -- package/linux-headers/Config.in.host toolchain/Config.in
make "${cfg}"
make savedefconfig
patch -p1 <<_EOF_
diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host
index 2ae4077ffe..e669f89267 100644
--- a/package/linux-headers/Config.in.host
+++ b/package/linux-headers/Config.in.host
@@ -129,8 +129,12 @@ choice
If your kernel headers are more recent than the latest version
in the choice, then select the latest version.
+config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_11
+ bool "6.11.x or later"
+ select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11
+
config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_10
- bool "6.10.x or later"
+ bool "6.10.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10
config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_9
diff --git a/toolchain/Config.in b/toolchain/Config.in
index 6e91ab756c..c2522aca7f 100644
--- a/toolchain/Config.in
+++ b/toolchain/Config.in
@@ -656,6 +656,10 @@ config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9
config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10
bool
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9
+
+config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11
+ bool
+ select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10
select BR2_TOOLCHAIN_HEADERS_LATEST
# This should be selected by the latest version, above, to indicate that
@@ -669,6 +673,7 @@ config BR2_TOOLCHAIN_HEADERS_LATEST
# stops affecting a value on the first matching default.
config BR2_TOOLCHAIN_HEADERS_AT_LEAST
string
+ default "6.11" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11
default "6.10" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10
default "6.9" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9
default "6.8" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_8
_EOF_
make "${cfg}"
git checkout -- package/linux-headers/Config.in.host toolchain/Config.in
diff="$(
diff -I '_6_11\|BR2_TOOLCHAIN_HEADERS_LATEST=y' -du \
<( tail -n +5 .config.old ) \
<( tail -n +5 .config )
)"
if [ "${diff}" ]; then
printf 'Not idempotent for "%s"\n' "${cfg}" >&2
exit 1
fi
---8<------8<------8<------8<------8<---
====
To verify that no other changes are made to the defconfigs that are
risky when the defaults change, we ran the following simple script
(where buildroot-prev is a checkout just before this commit). It shows
that there are many settings removed because they are default, but none
of them run the same risk that the default is going to be changed in the
future.
for i in configs/*_defconfig; do
diff="$(diffconfig ../buildroot-next/$i $i)"
if [ -n "$diff" ]; then
echo "==> $i"
echo "$diff"
echo
fi
done
--->8------>8------>8------>8------>8---
==> configs/aarch64_efi_defconfig
-BR2_TARGET_GRUB2_ARM64_EFI y
==> configs/acmesystems_aria_g25_128mb_defconfig
-BR2_arm926t y
==> configs/acmesystems_aria_g25_256mb_defconfig
-BR2_arm926t y
==> configs/acmesystems_arietta_g25_128mb_defconfig
-BR2_arm926t y
==> configs/acmesystems_arietta_g25_256mb_defconfig
-BR2_arm926t y
==> configs/amarula_vyasa_rk3288_defconfig
-BR2_PACKAGE_HOST_UBOOT_TOOLS y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/armadeus_apf27_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/armadeus_apf28_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/armadeus_apf51_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/aspeed_ast2600evb_defconfig
-BR2_ARM_FPU_VFPV4D16 y
==> configs/asus_tinker-s_rk3288_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/at91sam9260eknf_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/at91sam9g20dfc_defconfig
-BR2_TARGET_ROOTFS_TAR y
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_TARGET_ROOTFS_UBIFS_LEBSIZE 0x1f800
-BR2_TARGET_ROOTFS_UBIFS_MINIOSIZE 0x800
-BR2_TARGET_ROOTFS_UBI_PEBSIZE 0x20000
-BR2_TARGET_ROOTFS_UBI_SUBSIZE 512
-BR2_arm926t y
==> configs/at91sam9g45m10ek_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/at91sam9rlek_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/at91sam9x5ek_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/at91sam9x5ek_dev_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/at91sam9x5ek_mmc_defconfig
-BR2_arm926t y
==> configs/at91sam9x5ek_mmc_dev_defconfig
-BR2_arm926t y
==> configs/atmel_sama5d3_xplained_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/atmel_sama5d3_xplained_dev_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/atmel_sama5d3xek_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/atmel_sama5d4_xplained_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/atmel_sama5d4_xplained_dev_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/bananapi_m2_ultra_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/bananapro_defconfig
-BR2_ARM_EABIHF y
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
==> configs/beaglebone_qt5_defconfig
-BR2_PACKAGE_TI_SGX_KM y
-BR2_TOOLCHAIN_BUILDROOT_GLIBC y
==> configs/beagleboneai64_defconfig
-BR2_TARGET_TI_K3_BOOT_FIRMWARE y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT y
==> configs/beelink_gs1_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/canaan_kd233_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
==> configs/ci20_defconfig
-BR2_KERNEL_HEADERS_AS_KERNEL y
-BR2_PACKAGE_HOST_UBOOT_TOOLS y
-BR2_TARGET_UBOOT_SPL_NAME "spl/u-boot-spl.bin"
==> configs/cubieboard2_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/freescale_imx28evk_defconfig
-BR2_arm926t y
==> configs/friendlyarm_nanopi_r2s_defconfig
-BR2_cortex_a53 y
==> configs/globalscale_espressobin_defconfig
-BR2_cortex_a53 y
==> configs/hifive_unleashed_defconfig
-BR2_LINUX_KERNEL_IMAGE y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
-BR2_TARGET_GENERIC_GETTY y
==> configs/imx23evk_defconfig
-BR2_arm926t y
==> configs/imxrt1050-evk_defconfig
-BR2_LINUX_KERNEL_ZIMAGE y
==> configs/khadas_vim3_defconfig
-BR2_PACKAGE_HOST_AMLOGIC_BOOT_FIP_DEVICE "khadas-vim3"
==> configs/kontron_bl_imx8mm_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/kontron_pitx_imx8m_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/kontron_smarc_sal28_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/lafrite_defconfig
-BR2_cortex_a53 y
==> configs/lego_ev3_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_arm926t y
==> configs/linksprite_pcduino_defconfig
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/ls1046a-frwy_defconfig
-BR2_PACKAGE_QORIQ_FM_UCODE_PLATFORM "ls1046"
==> configs/mx6cubox_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/nexbox_a95x_defconfig
-BR2_cortex_a53 y
==> configs/nitrogen6sx_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/nitrogen6x_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/nitrogen7_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/nitrogen8m_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_cortex_a53 y
==> configs/nitrogen8mm_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_cortex_a53 y
==> configs/nitrogen8mn_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_cortex_a53 y
==> configs/nitrogen8mp_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_cortex_a53 y
==> configs/odroidc2_defconfig
-BR2_TARGET_UBOOT_BUILD_SYSTEM_LEGACY y
==> configs/olimex_a10_olinuxino_lime_defconfig
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/olimex_a13_olinuxino_defconfig
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/olimex_a20_olinuxino_lime2_defconfig
-BR2_ARM_EABIHF y
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_PACKAGE_SUNXI_MALI_UTGARD_DRIVER y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_TOOLCHAIN_BUILDROOT_GLIBC y
==> configs/olimex_a20_olinuxino_lime_defconfig
-BR2_ARM_EABIHF y
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_PACKAGE_SUNXI_MALI_UTGARD_DRIVER y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_TOOLCHAIN_BUILDROOT_GLIBC y
==> configs/olimex_a20_olinuxino_micro_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/olimex_a33_olinuxino_defconfig
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/olimex_a64_olinuxino_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/olimex_imx233_olinuxino_defconfig
-BR2_arm926t y
==> configs/openblocks_a6_defconfig
-BR2_arm926t y
==> configs/orangepi_lite2_defconfig
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_cortex_a53 y
==> configs/orangepi_one_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/orangepi_one_plus_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_cortex_a53 y
==> configs/orangepi_pc_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/orangepi_pc_plus_defconfig
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/orangepi_r1_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/orangepi_zero2w_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/orangepi_zero3_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/orangepi_zero_defconfig
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/orangepi_zero_plus2_defconfig
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/orangepi_zero_plus_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/pine64_defconfig
-BR2_cortex_a53 y
==> configs/pine64_sopine_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_cortex_a53 y
==> configs/qemu_aarch64_sbsa_defconfig
-BR2_TARGET_GRUB2_ARM64_EFI y
==> configs/qemu_aarch64_virt_defconfig
-BR2_cortex_a53 y
==> configs/qemu_arm_versatile_defconfig
-BR2_arm926t y
==> configs/qemu_arm_vexpress_defconfig
-BR2_ARM_FPU_VFPV3D16 y
==> configs/qemu_arm_vexpress_tz_defconfig
-BR2_PACKAGE_LIBOPENSSL y
==> configs/qemu_m68k_mcf5208_defconfig
-BR2_LINUX_KERNEL_VMLINUX y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_m68k_q800_defconfig
-BR2_LINUX_KERNEL_VMLINUX y
-BR2_TARGET_GENERIC_GETTY y
-BR2_m68k_68040 y
==> configs/qemu_microblazebe_mmu_defconfig
-BR2_microblaze y
==> configs/qemu_microblazeel_mmu_defconfig
-BR2_microblaze y
==> configs/qemu_mips32r2_malta_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips32r2el_malta_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips32r6_malta_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips32r6el_malta_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips64_malta_defconfig
-BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips64el_malta_defconfig
-BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips64r6_malta_defconfig
-BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips64r6el_malta_defconfig
-BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_ppc64le_powernv8_defconfig
-BR2_powerpc_power8 y
==> configs/qemu_ppc64le_pseries_defconfig
-BR2_powerpc_power8 y
==> configs/qemu_ppc_bamboo_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_ppc_g3beige_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_ppc_mpc8544ds_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_riscv32_nommu_virt_defconfig
-BR2_LINUX_KERNEL_IMAGE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_riscv32_virt_defconfig
-BR2_LINUX_KERNEL_IMAGE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_riscv64_nommu_virt_defconfig
-BR2_LINUX_KERNEL_IMAGE y
-BR2_RISCV_64 y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_riscv64_virt_defconfig
-BR2_LINUX_KERNEL_IMAGE y
-BR2_RISCV_64 y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_sh4_r2d_defconfig
-BR2_sh4 y
==> configs/qemu_sparc64_sun4u_defconfig
-BR2_sparc_v9 y
==> configs/qemu_sparc_ss10_defconfig
-BR2_sparc_v8 y
==> configs/qemu_x86_defconfig
-BR2_i386 y
==> configs/raspberrypi0_defconfig
-BR2_ARM_EABIHF y
==> configs/raspberrypi0w_defconfig
-BR2_ARM_EABIHF y
==> configs/raspberrypi2_defconfig
-BR2_ARM_EABIHF y
==> configs/raspberrypi3_64_defconfig
-BR2_cortex_a53 y
==> configs/raspberrypi3_qt5we_defconfig
-BR2_PACKAGE_KMOD y
-BR2_PACKAGE_QT5BASE_JPEG y
-BR2_PACKAGE_QT5BASE_PNG y
-BR2_TOOLCHAIN_BUILDROOT_GLIBC y
==> configs/raspberrypi_defconfig
-BR2_ARM_EABIHF y
==> configs/riotboard_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/rock64_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/rock_pi_n8_defconfig
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/rockpro64_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/s6lx9_microboard_defconfig
-BR2_microblaze y
==> configs/sheevaplug_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_NETWORK n
-BR2_arm926t y
==> configs/sipeed_maix_bit_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
==> configs/sipeed_maix_bit_sdcard_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
-BR2_TARGET_UBOOT_FORMAT_BIN y
==> configs/sipeed_maix_dock_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
==> configs/sipeed_maix_dock_sdcard_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
-BR2_TARGET_UBOOT_FORMAT_BIN y
==> configs/sipeed_maix_go_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
==> configs/sipeed_maix_go_sdcard_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
-BR2_TARGET_UBOOT_FORMAT_BIN y
==> configs/sipeed_maixduino_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
==> configs/sipeed_maixduino_sdcard_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
-BR2_TARGET_UBOOT_FORMAT_BIN y
==> configs/snps_archs38_hsdk_defconfig
-BR2_TOOLCHAIN_BUILDROOT_GLIBC y
==> configs/solidrun_clearfog_gt_8k_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP n
==> configs/solidrun_macchiatobin_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP n
-BR2_TARGET_ROOTFS_TAR y
-BR2_TARGET_UBOOT_USE_DEFCONFIG y
==> configs/spike_riscv64_defconfig
-BR2_RISCV_64 y
==> configs/ts5500_defconfig
-BR2_i386 y
-BR2_x86_i586 y
==> configs/versal_vck190_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/versal_vpk180_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_kria_kd240_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_kria_kr260_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_kria_kv260_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_zcu102_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_zcu104_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_zcu106_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
---8<------8<------8<------8<------8<---
Doctoring a defconfig is tedious, and it is not easy to update a
defconfig, as it requires manual copy-pasting, adding comments and so
on...
Instead, just require defconfigs to be generated with 'savedefconfig'.
Any details can/must be provided in the commit log.
Reported-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Currently, there is no default value in the choice for the custom kernel
version, and the latest version is at the top of the list.
This means tha a defconfig that uses the latest version does not get the
symbol written in it, and thus when a newer version is latter added, the
defconfig is then incorrect.
To kinda-workaround the issue, make the oldest, pre-3.0 version the
default: this is always going to be the oldest version, we're not going
to add anything older than that, so defconfigs that use that version
will not have it written but that will always yield it back. Conversely,
all other defconfigs will get the kernel version written in them, so it
will stick even when we add newer versions.
Reported-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This version fixes an out-of-bound reads in the MLSD command, so upgrading is recommended.
It also improves compatibility with various systems.
Update the COPYING hash because of a change in copyright year
Signed-off-by: Michael Fischer <mf@go-sys.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also add a missing article one line above.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Arnout: fix additional typo]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Upstream curl commit f057de5a1a950 ("libcurl.pc: add `Requires.private`,
`Requires` for static linking") deals with proper pkg-config
configuration since version 8.9.0.
Our local libcurl.pc modification we added back in commit 61d322c3d2
(package/cURL: fix static link whith openSSL) is no longer needed.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[yann.morin.1998@free.fr: this is not a "revert", reword commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Changes made to the Buildroot package:
- use github url for download
- switch to cmake infrastructure
- add new option for TUI support
- add new option for SSL support
- TFO is always enabled now, and therefore we don't need to add
Config.in.legacy handling for this option
- remove no longer required patches 0001/0002
- update license file to LICENSE
- update license to AGPLv3
- always build without gettext support
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[yann.morin.1998@free.fr:
- update .checkpackageignore
- don't use $(call github...)
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes a build error introduced by bumping the linux kernel headers to
6.8 with buildroot commit 807a449256.
No autobuilder failures were recorded with this problem.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop no longer required python-six and python-pathpy runtime
dependencies.
Add new python-path runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
License hash changed due to date update:
https://github.com/lextudio/pysnmp/commit/fa9909cbbf9b25eb992a945715e2511a2ba2c905
Update license from BSD-3-Clause to BSD-2-Clause, the license
changed in 8122a1d85b but the commit
incorrectly indicated "no content changed" when updating the hash.
Add new python-pysnmpcrypto runtime dependency.
Drop no longer required python-pycryptodomex runtime dependency.
Migrate from setuptools to poetry build backend.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr:
- only list first-level dependency in rust arch support comment
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This reverts commit 616de7655a.
The commit log forgot to mention the license hash change, and a v2 was
later posted, but v1 was applied in error.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Migrate from setuptools to flit build backend.
Add new python-markupsafe runtime dependency.
License file renamed without content changes.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add new python-typing-extensions runtime dependency.
Add new python-wcwidth runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop no longer required python-idna runtime dependency.
Drop no longer required python-incremental runtime dependency.
Drop no longer required python-pyopenssl runtime dependency.
Drop no longer required python-service-identity runtime dependency.
Add new python-cryptography runtime dependency.
Add new python-twisted-tls runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop no longer required python-async-generator runtime dependency.
Add license file which was previously missing.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add new python-packaging runtime dependency.
Add new python-pyyaml runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop patch which is now upstream; that was a backport from an upstream
security fix for CVE-2023-28370, so we can drop the CVE exclusion now.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr:
- drop CVE exclusion
- extend commit log accordingly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Migrate to setuptools-rust build backend.
Add new python-typing-extensions runtime dependency.
Add new python-websocket-client runtime dependency.
Add license file which was previously missing from release.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 89d39fc7a3 "initscripts: new package" moved the inittab
packaged for Busybox init from system/skeleton/etc to package/busybox.
The manual, however, still points to the old location, so let's fix it.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We need to pass the --skip-dependency-check build option as we do
not provide the swig dependency as a python package but rather
as a normal installed package.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Verified license remains MIT after hash changed.
License hash changed due to line endings changing from windows style
to unix style.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The transition from version 1.1 to 3.0.9, and subsequently to 3.3.1,
added new compilation options. This led to a significant increase in the
size of the library. These options allow user to disable these features
to obtain a smaller library size.
To ensure backward compatibility, all items are selected by default.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit a87abcf6da (Makefile: run PPD and RPATH fixup in host-fialize)
(sic) moved the fixups peviously done in prepare-sdk, to host-finalize.
This exposed a bug in fix-rpath, when RPATH contains multiple entries,
like: /PPD/host-foo/host/lib:/PPD/host-foo/host/lib/foo
In that situation, we want to get rid of /PPD/host-foo and replace it
with the finale HOST_DIR, so we mangle the RPATH with a sed expression.
However, that sed expression only ever replaces the first match, as it
is missing the 'g' option. Thus, the second (and following) parts of
RPATH are still referring to the PPD, and thus patchelf does not find it
relative to the final HOST_DIR, amd rops it. This eventually lead to a
final RPATH set as $ORIGIN/../lib instead of the expected
$ORIGIN/../lib:$ORIGIN/../lib/foo
This is the case for host-systemd, which installs some of its libraries
in $PREFIX/lib/systemd/ and adds an RPATH set appropriately to
/PPD/host-systemd/host/lib:/PPD/host-systemd/host/lib/systemd and that
gets incorrectly mangled.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/issues/39
Also fix a typo in the comment just above.
Reported-by: José Luis Salvador Rufo @jlsalvador
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Reviewed-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Tested-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Reviewed-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Browsers nowadays complain about HTTP downloads (E.G. manual.pdf) from a
site served over HTTPS, so also use HTTPS for the nightly.buildroot.org
manual links.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From https://github.com/troglobit/sysklogd/releases/tag/v2.6.2:
- syslog.conf: misplaced continuation character in example
- Add facility aliases for RFC5424 compliance: LOG_CRON2 and LOG_AUDIT,
including facilitynames[] = cron2, audit. Used by the native logger
tool (and any clients linking to libsyslog)
- Fix data corruption using the listen directive, introduced in 2.6.0
- Fix IPv6 addresses in listen directive, introduced in 2.6.0
- Fix logging to remote IPv6 address, add support for parsing
[fdd5::6979:c0ff:ee87:8f92]:123 style addresses
- Fix initial delay for unresolvable remote target. When a DNS name
cannot be resolved, e.g., critically at boot, syslogd blocked with
default resolver timeout (5 * 2 sec)
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This package is similar to python-libconfig, but since it is available
in pypi, python developers usually find it more familiar
Signed-off-by: Flávio Tapajós <flavio.tapajos@newtesc.com.br>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop patch which is now upstream.
Drop no longer required python-six runtime dependency.
Add new python-iterable-io runtime dependency.
Add new python-zipstream-ng runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop workaround when a c++ compiler is not available as msgpack
now uses only pure c extensions.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Migrate from setuptools to meson build system.
Add new python-fonttools runtime dependency.
Add new python-packaging runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add new python-jaraco-context runtime dependency.
Add new python-jaraco.functools runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The behaviour of asciidoc on my laptop (Debian 10.2.0-1) changed at the end
of last year, causing the BR2_VERSION logic to no longer work:
grep 'manual generated' buildroot-2023.02.*/docs/manual/manual.text
buildroot-2023.02.6/docs/manual/manual.text:Buildroot 2023.02.6 manual generated on 2023-10-16 08:41:26 UTC from
buildroot-2023.02.7/docs/manual/manual.text:Buildroot ${BR2_VERSION%%-git*} manual generated on 2023-11-14
buildroot-2023.02.8/docs/manual/manual.text:Buildroot ${BR2_VERSION%%-git*} manual generated on 2023-12-04
We don't really NEED to strip the -git suffix; indeed, for a git tag, there
would be not -git suffix, while for any other commit there will be one
and we want to see it (e.g. in the nightly manual, or on a development
branch locally).
So just drop that to unbreak the version output.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr: explain why wew don't want to drop it]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Test the go-bin provider of host-go to build a Go package.
The tests consist of building and installing a Go package in the root
file system of an ARM vexpress QEMU system.
The tests pass if the program runs on the target.
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
[yann.morin.1998@free.fr: use to flannel, which can be vendored today]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This package provides a pre-built version for the host-go virtual
package introduced in the previous commits:
- host-go-bin installs a pre-built version of the Go compiler.
By default, host-go remains built from sources to keep the same
behavior as the former version.
The menuconfig entry for host-go is updated to expose the host-go-bin
provider. The dependencies are set as such as if host-go-src does not
support the host architecture, it will automatically fall back to
host-go-bin and vice versa.
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
[yann.morin.1998@free.fr:
- update hashes for 1.22.7
- add hash for the source tarball
- set _DL_SUBDIR
- don't set a prompt to BR2_PACKAGE_HOST_GO_BIN_HOST_ARCH
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The test currently uses tinifier, but it can't be vendored as of today,
so switch to use flannel which can (still?) be...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, the runtime tests will use the sources.buildroot.org backup
mirror, which is the default setup.
However, in some cases we do not want to use the backup site, because we
want to ensure that the download actually works.
This is the case for vendored packages, like cargo or golang packages,
for whbich we want to check that gthe download still works when we
update the rust or go versions, or when our download helpers change.
So, disable the use of the backup site in all runtime tests, and drop
the no-longer needed special cases.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
See the release notes for 1.6.29 here:
https://github.com/memcached/memcached/wiki/ReleaseNotes1629
Older release notes are also available.
Patch 0001 is upstream since commit
aceefca9bc7635eab4893f626aec78e9966db93c.
Patch 0002 is upstream since commit
d9bf02f6331fc0098af8997d2a571fc4525696fc.
Autoreconf of package is no longer needed.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a real fix for the time64 issue instead of disabling
time64 for mips64 n32 big endian.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop no longer required python-backcall runtime dependency.
Drop no longer required python-pickleshare runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop no longer required python-pydantic runtime dependency and
propagate reverse dependency removal.
Drop no longer required python-typing-extensions runtime dependency.
Add new python-more-itertools runtime dependency.
Add new python-typeguard runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add new python-proto-plus runtime dependency, which requires adding
BR2_PACKAGE_HOST_PROTOBUF_ARCH_SUPPORTS and propagate to reverse
dependencies.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Migrate build backend from setuptools to flit.
The license file got renamed, but the contents did not change.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This reverts commit 4349746dac
which states:
commit 4349746dac
Author: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Date: Thu Apr 18 11:13:50 2019 +0200
package/boost: don't install boost cmake files
Since version 1.70.0, boost installs its own cmake files which are
utterly broken so don't install them otherwise all cmake packages using
boost (host-thrift, domoticz, i2pd ...) will fail because
BOOST_INCLUDE_DIRS will be empty
Fixes:
- http://autobuild.buildroot.org/results/4ada26bab5c1e6504c7d8c92672326ced1d336df
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
However, this has since been fixed upstream in the five years this change
has been in Buildroot. Furthermore, having --no-cmake-config breaks packages
expecting to dynamically link to boost::log with a multitude of `undefined
reference to boost::log` errors.
See: https://github.com/mendersoftware/mender/pull/1663 for one such example.
As the --no-cmake-config is no longer needed because the original problem has
long since been fixed upstream, it is safe to revert the change.
Tested with the following packages as a smoke test:
- host-thrift
- domoticz
- i2pd
- libcpprestsdk
- log4cxx
- mpd
- libcamera-apps
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Drop no longer required patch.
Drop no longer required python-six and python-attrs runtime
dependencies.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Enable mdev so that coldplug will automatically load kernel modules that
were unavailable before rootfs was mounted.
mdev will also enable hotplug so that kernel modules will be automatically
loaded when a new device is inserted in e.g. USB or PCIe after boot.
Before this change:
$ lsmod | wc -l
0
After this change:
$ lsmod | wc -l
43
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add new smart and smartmontools config options.
Add new libyaml dependency to lvm config option.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Config.in comment was before sub-options, so it was preventing
menuconfig from rendering sub-options indented under the main zabbix
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to maintained and stable 7.0.3 version.
Patch 0002 does no longer apply: libressl support is not supported for
our version of Libressl, so now we only support openssl, and not
libressl.
It is required to start the daemons with -f otherwise they are
restarted every 30 seconds.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add an option to install the cc33xx firmware files.
The TI cc33xx family of devices support WiFi 6 and BLE 5.4.
Signed-off-by: Sabeeh Khan <sabeeh-khan@ti.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Expose the host-go in the menuconfig, so that user can select what go
compiler to use, without having to first enable a go package, or to
have it in the SDK without having a go package enabled.
Signed-off-by: Athaariq Ardhiansyah <foss@athaariq.my.id>
[yann.morin.1998@free.fr: rewrite commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
OP-TEE OS and TAs can run on RISC-V (64-bit) machines, so allow
optee-os to be compiled for the new architecture.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
[Arnout:
- set CROSS_COMPILE_ta_rv64 even on arm builds;
- ARCH=arm for aarch64.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
When the build host does not have a Python interpreter installed,
host-grub2 is failing to configure due to this missing interpreter.
Note that host-grub2 is the first package to fail because it is a
dependency of grub2. The grub2 target package has the same dependency
requirement.
The issue can be quickly reproduced on a host without Python with the
commands:
cat <<EOF >.config
BR2_aarch64=y
BR2_TARGET_GRUB2=y
BR2_TOOLCHAIN_EXTERNAL=y
EOF
make olddefconfig
make grub2
grub2 autotools configure.ac search for a Python interpreter since
upstream commit [1] 8b467844e "python: Use AM_PATH_PYTHON to determine
interpreter for gentpl.py", first included in grub v2.04 released
on 2019-07-04. For reference, grub2 has been updated to that version
in commit [2] ea7ec41c "boot/grub2: bump to verson 2.04".
This commit fixes the issue by adding the host-python3 dependency to
host-grub2 and grub2.
Fixes:
checking for a Python interpreter with version >= 2.6... none
configure: error: no suitable Python interpreter found
[1] https://git.savannah.gnu.org/gitweb/?p=grub.git;a=commitdiff;h=8b467844e11170077c8ca727c39d2bd36eeb5f08
[2] https://gitlab.com/buildroot.org/buildroot/-/commit/ea7ec41cf64e86a692ac45e0d012c6e8199ef110
Reported-by: Vincent Stehlé <vincent.stehle@arm.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When BR2_PACKAGE_QT6DECLARATIVE_QUICK is enabled the QML compatibility
modules should be built and installed.
Signed-off-by: Christian Hitz <christian.hitz@bbv.ch>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
asha profile as it depends on audio profile which isn't selected
by default (BR2_PACKAGE_BLUEZ5_UTILS_PLUGINS_AUDIO), results in
below linking failure.
ld: profiles/audio/bluetoothd-asha.o: in function `get_transport':
asha.c:(.text.get_transport+0x2c): undefined reference to `media_transport_get_path'
Fixes: http://autobuild.buildroot.org/results/317bf4ad2593b1d1a8aec82cc0b3265285f00b7b/
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
[yann.morin.1998@free.fr: add autobuild reference]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The set -x was added for debugging, and forgotten to be removed
afterwards. Remove it now.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Everything inside the generic-package macro should be double-dollared,
except for $(1) $(2) etc. There was still a $(call ...) that was not
double-dollared in the legal-info target. The result is that
OVERRIDE_SRCDIR isn't actually qstrip'ed.
Double dollar the $(call ...) like everywhere else.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Cc: Nicolas Carrier <carrier.nicolas0@gmail.com>
Reported-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit aacca7f063 introduced the
possibility to also create tarballs for packages that are local or
overridden (i.e., with a custom version). However, it doesn't work
correctly for PPD, because the PPD-host-tar and gzip are not available.
This failure was silent because the mk_tar_gz function doesn't exit on
error. The following error was printed but ignored:
support/download/helpers: line 62: .../per-package/busybox/host/bin/tar: No such file or directory
Call prepare-per-package-directory before calling mk_tar_gz which uses
it. Note that we use only tar and gzip here, not all of
DOWNLOAD_DEPENDENCIES, because tar and gzip are the only ones we really
use.
Also add this dependency to the legal-info target. We use an order-only
dependency even though that makes not difference for a phony target, but
this makes it similar to how it's done for the stamp targets. Note also
that this dependency is redundant, because there is already a dependency
on the foo-rsync target which does depend on DOWNLOAD_DEPENDENCIES. We
still add the dependency explicitly in case things change with the
foo-rsync target in the future.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Cc: Nicolas Carrier <carrier.nicolas0@gmail.com>
Reported-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit aacca7f063 introduced the
possibility to also create tarballs for packages that are local or
overridden (i.e., with a custom version). However, it forgot to create
the directory in which that tarball is stored. The original patch did,
but it was reworked by Arnout to use mk_tar_gz instead of tar directly,
and the mkdir was dropped there.
This failure was silent because the mk_tar_gz function doesn't exit on
error. The following error was printed but ignored:
support/download/helpers: line 68: .../legal-info/sources/busybox-custom/busybox-custom.tar.gz: No such file or directory
Create the directory before calling mk_tar_gz.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Cc: Nicolas Carrier <carrier.nicolas0@gmail.com>
Reported-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Samuel Martin has not been around in the Buildroot community for many,
many years. His last posting on the mailing list was on July 2018. So
let's not pretend those packages are actually maintained, and let's
stop spamming Samuel with lots of patches and autobuilder failures.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The previous default URL used for the PEN registry was not stable and
could change at any time, making it unacceptable to have to update its
hash every time.
With this patch, if the PEN (Enterprise numbers) registry is installed
by the iana-assignments package, ipmitool will use it. Otherwise, the
user can provide a custom file in a rootfs overlay.
Downloading such a file is no longer supported.
Fixes:
- http://autobuild.buildroot.org/results/5ae5ee948d99679cd50d1115a7d46f4368347b4f
Co-Developed-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Co-Developed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: always look in /usr/share/misc/iana/]
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
When BR2_PACKAGE_QT6DECLARATIVE_QUICK is enabled the qt linuguist tool
lupdate should support QML/JS files.
Signed-off-by: Christian Hitz <christian.hitz@bbv.ch>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This reverts commit c8662264eb.
Thanks to
7b9e0ec57c ("package/qt6/qt6tools: allow
building linguist tools without printsupport"), this is in fact not
needed, as linguist for the host can be built without having
printsupport in host-qt6base, so let's drop the hidden options that
are now unused.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This fixes a regression in qttools that would not build the qt linuguist
tools (lupdate, lrelease, etc.) when CUPS is not available.
Signed-off-by: Christian Hitz <christian.hitz@bbv.ch>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
According to src/linguist/CMakeLists.txt we need to enable the linguist
feature:
...
if(NOT QT_FEATURE_linguist)
return()
endif()
add_subdirectory(lconvert)
add_subdirectory(lprodump)
add_subdirectory(lrelease)
add_subdirectory(lrelease-pro)
add_subdirectory(lupdate)
add_subdirectory(lupdate-pro)
if(QT_FEATURE_process AND QT_FEATURE_pushbutton AND QT_FEATURE_toolbutton AND TARGET Qt::Widgets AND NOT no-png)
add_subdirectory(linguist)
endif()
...
And according to configure.cmake we need to select print support:
...
qt_feature("linguist" PRIVATE
LABEL "Qt Linguist"
PURPOSE "Qt Linguist can be used by translator to translate text in Qt applications."
CONDITION TARGET Qt::PrintSupport
)
...
Signed-off-by: Roy Kollen Svendsen <roykollensvendsen@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add Config.in.host to allow separating options affecting host and target
builds.
Move/copy parts of Config.in into Config.in.host.
Signed-off-by: Roy Kollen Svendsen <roykollensvendsen@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
According to configure.cmake print support requires us to select the
widgets feature:
...
qt_feature("printsupport" PRIVATE
LABEL "Qt PrintSupport"
CONDITION QT_FEATURE_widgets
SECTION "Module"
PURPOSE "Provides the Qt PrintSupport module."
)
...
And further, according to configure.cmake, widgets requires us to select
the gui feature:
...
qt_feature("widgets" PRIVATE
LABEL "Qt Widgets"
AUTODETECT NOT TVOS AND NOT WATCHOS
CONDITION QT_FEATURE_gui
)
...
Signed-off-by: Roy Kollen Svendsen <roykollensvendsen@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The initialization script provided by the tinyinit package is the same
as the one contained in board/canaan/k210-soc/rootfs_overlay/sbin/init
except for the Linux logo, which has been removed. The patch reworks
the configurations that use this overlay directory by replacing the
initialization process contained within it with the one provided by
the tinyinit package.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The old homepage is no more, and the download location has changed.
Update both to the new download location.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The commit adds an upstream patch to fix the following build failure:
latency.c: In function 'dump_histo_gnuplot':
latency.c:415:9: error: 'fclose' called on pointer returned from a mismatched allocation function [-Werror=mismatched-dealloc]
415 | fclose(ifp);
| ^~~~~~~~~~~
latency.c:404:15: note: returned from 'popen'
404 | ifp = popen(xconf, "r");
| ^~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/e15ccef2f2bd58482204b5061f77e76a8a540ebd
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package contains a Linux init script suitable for resource-limited
systems which can be used as an alternative to the one provided by
Busybox.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
[yann.morin.1998@free.fr: drop 'imply busybox']
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tini is a special-purpose init system, aimed at containers.
Add it to the choice of init systems.
tini does not require much, so we re-use the default "none" skeleton.
Note that tini is no longer selectable on its own, which it used to be.
This change will require that people using tini be careful when
upgrading, though, but that will be very easily caught, as the
containers would no longer start at all.
We could add a comment stating why, but no other init system has such a
comment, so adding one for tini alone would be weird, so we don't add
one.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
We're going to add more init systems, and some have a very special
purpose, so we do not want to mix them with the mundane platitude of
existing init systems.
Add comments to separate the two.
Note that the list would already contain comments, when a br2-external
tree provides an init system, so those new comments would not be totally
weird-looking.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Currently, the label reads "None", but it can be a bit misleading.
Indeed, since its inception in 0c00636e8b (system/init: add option for
no init system), what it really meant was "none of the above", as
briefly laid out in the commit log for 0c00636e8b (typo included):
Can be usefull if a local package provides an init procedure.
This was later refined in 4d185e5ec5 (system: add help entry to "none"
init system), which explained:
Add a comment that states the user has to provide his own init
system, either via a package or a rootfs overlay.
So, change the label to better reflect that.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Fixes the following CVEs:
CVE-2024-34155: go/parser: stack exhaustion in all Parse* functions
CVE-2024-34156: encoding/gob: stack exhaustion in Decoder.Decode
CVE-2024-34158: go/build/constraint: stack exhaustion in Parse
https://go.dev/doc/devel/release#go1.22.7
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rewrap the whole help text as with the typo fix the line is a bit
longer and no longer fits within the limits defined by our
check-package coding style checking.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove no longer required python-async-timeout runtime dependency.
Add new python-aiohappyeyeballs runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This reverts commit e0ed05cc00.
Since this commit has been applied, the update of the NVD data fails:
Checking packages CVEs
Updating from https://github.com/fkie-cad/nvd-json-data-feeds/
Traceback (most recent call last):
File "/home/buildroot/buildroot-stats/./support/scripts/pkg-stats", line 1346, in <module>
__main__()
File "/home/buildroot/buildroot-stats/./support/scripts/pkg-stats", line 1335, in __main__
check_package_cves(args.nvd_path, packages)
File "/home/buildroot/buildroot-stats/./support/scripts/pkg-stats", line 660, in check_package_cves
for cve in cvecheck.CVE.read_nvd_dir(nvd_path):
File "/home/buildroot/buildroot-stats/support/scripts/cve.py", line 105, in read_nvd_dir
CVE.download_nvd(nvd_git_dir)
File "/home/buildroot/buildroot-stats/support/scripts/cve.py", line 74, in download_nvd
subprocess.check_call(
File "/usr/lib/python3.11/subprocess.py", line 413, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['git', 'pull', '--depth', '1']' returned non-zero exit status 128.
Since we couldn't immediately figure out what's going on, let's revert
for now until this get investigated and fixed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Disabled roc & snap dependencies, which don't exist in buildroot.
Added libselinux optional dependency.
The bluez plugin now uses libglib2 explicitly. Although this dependency
is implied by bluez5_utils, track it explicitly in the .mk file as well.
Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This allows for more precise control of the AAC codec feature,
instead of it being silently enabled if the fdk-aac library happens
to be built earlier, or disabled otherwise.
Also remove the -Dbluez5-codec-opus=disabled option in the case where
the entire bluez5 integration is disabled. -Dbluez5=disabled implies
that all codecs are also disabled.
Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
WirePlumber is a PipeWire session manager, essential to the operation
of PipeWire in most use cases. It is not a graphical application,
nor does it support graphics in any way. It is only there to support
PipeWire and it should be kept together with PipeWire in the menus.
Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Drop patch that was backported from upstream.
Explicitly disable elogind, which doesn't exist in buildroot.
Also disable building tests.
Patch 0001 is upstream.
Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The two lines with the Buildroot version and the system os-release
details are rendered on a single line, "because Markdown".
Make that a two-item list, to be sure they are on properly rendered.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr: also fix grammar]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As FOO_RESOURCES hints, the correct spelling is resources so use that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
1.0.50 already includes these patches, so remove them.
This happened mistakenly while merging next back to master branch.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While we're at it, also fix the _SOURCE variable so it contains the
-cargo2 suffix. Without this change, the downloaded tarball name
pre-vendoring is the same as post-vendoring and is thus overwritten.
This change was actually done in commit
c617ebbc97, but then forgotten when the
python-pydantic-core temporarily switched to upstream git instead of
PyPI.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
pyproject.toml declared the tzdata package as a required dependency, but
this is in fact only needed on win32. This was fixed upstream [1]. Since
we don't actually check the runtime dependencies from pyproject.toml, we
don't need to do anything in Buildroot.
[1] https://github.com/pydantic/pydantic/pull/10331
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Arnout: remove tzdata runtime dependency]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Currently, the gdbinit is generated and installed during post install
hooks, either from the gdb package, or from the external-toolchain
package. When using per-package directories (PPD), the staging directory
of the either package is stored in the generated gdbinit, which is not
going to be valid when all the PPD staging dirs get merged into the
final staging: it would lack any library installed afterwards, i.e.
mostly everything would be missing (but the libraries from the C
toolchain in the case of an external toolchain).
Similarly, all the RPATH will point to various PPD drectories. This
does not cause any issue when the final host is aggregated, because the
PPD directories still exist when we call programs from there (e.g. from
the fs infra, or from post-image scripts).
However, we knew that would not always be possible to keep the PPD
directories: we have the prepare-sdk rule that runs a cleanup pass on
the RPATH, and also applies the generic PPD fixups.
When we introduced prepare-sdk in c32ad51cbf (core/sdk: generate the
SDK tarball ourselves), we did not yet have support for PPD for the host
directory, and especially, we did not have the host-finalize rule, which
was only introduced in d0f4f95e39 (Makefile: rework main directory
creation logic) which kick-started the introduction of PPD.
At that point, we did not realise that the rpath fixups from
prepare-sdk, would be better moved to the new host-finalize rule,
because that had no impact unless one would need an SDK.
Later, in 25e60fbe1c (Makefile: fix SDK relocation for
per-package-dirs), we eventually introduced the PPD generic fixups in
the prepare-sdk rule. Again, we did not realise that those fixups would
be better placed in the host-finalize rule rather than the prepare-sdk.
While fixing the RPATH in host-finalize is not critical, fixing up the
PPD paths actually is, as the gdbinit case demonstrate.
As such, move the PPD fixups to the host-finalize step, and while at it,
also move the RPATH fixups.
This now does not leave much to do in the prepare-sdk step, and that
could very well be moved to the host-finalize rule as well. However,
some people may have started to rely on prepare-sdk in its 6 years of
existence, and the little script it installs is not needed unless one
really needs an SDK. So leave it as it is for now.
Reported-by: Casey Reeves <casey@xogium.me>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Casey Reeves <casey@xogium.me>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Brandon Maier <Brandon.Maier@collins.com>
Tested-by: Brandon Maier <brandon.maier@collins.com>
Acked-by: TIAN Yuanhao <tianyuanhao3@163.com>
Add an option to install the firmware file required by the Linux rp2
driver.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
[yann.morin.1998@free.fr: fix indentation in help text]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
../testsuite/reftests/gtk-reftest.c:28:10: fatal error: execinfo.h: No such file or directory
We don't need the test suite, so disable it.
Signed-off-by: Thomas Devoogdt <thomas@devoogdt.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Newer versions of the imx6ulpico board come populated with QCA9377
Wifi chip instad of BRCM4339.
Also install the QCA9377 firmware so that Wifi can work by default
on the newer board revisions.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to U-Boot 2024.07 and kernel 6.6.48 versions.
The default U-Boot pico-imx6ul_defconfig causes the board to hang in SPL.
Fix it by chaging it to the more specific U-Boot
pico-pi-imx6ul_defconfig.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
By default, 'cargo install' also installs a kind of "registry" in
/usr/.crates2.json and /usr/.crates.toml [0]:
To track information of installed executables, some extra files,
such as .crates.toml and .crates2.json, are also created under this
root.
Presumably, this would be used by "cargo uninstall" to properly cleanup
the package [1]:
By default all binaries are removed for a crate [...].
However, in the context of Buildroot, this is useless, as we do not
uninstall packages, and thus those files are superfluous.
Tell cargo to not create that tracking information, by using --no-track
to "cargo install".
Note that this would cause cargo to fail to install a file that already
exists [2], like would be the case when running foo-reinstall for example:
--no-track
By default, Cargo keeps track of the installed packages with a
metadata file stored in the installation root directory. This flag
tells Cargo not to use or create that file. With this flag, Cargo
will refuse to overwrite any existing files unless the --force flag
is used. This also disables Cargo’s ability to protect against
multiple concurrent invocations of Cargo installing at the same
time.
However, we do already use --force which allows cargo to overwrite
existing files without any further ado, so in our case, --no-track will
only disable the tracking information.
Also, in Buildroot, we do not have concurrent installation _to the same
location_: either PPD is disabled, in which case only one package will
be installed to the common target/ at a time, or we're using PPD, so
each package will get installed into its own target/. Thus, --no-track
has no adverse side effect for us.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/issues/17
[0] https://doc.rust-lang.org/cargo/reference/config.html#installroot
[1] https://doc.rust-lang.org/cargo/commands/cargo-uninstall.html
[2] https://doc.rust-lang.org/cargo/commands/cargo-install.html
Reported-by: Thomas Kindler @thomask77
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Thomas Kindler @thomask77
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add an option to enable building and installing the MiniBrowser program
included in the WebKitGTK source tree. This may be handy now that Midori
will no longer be packaged in Builroot. A post-install hook installs a
symbolic link to it into /usr/bin for convenience.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
and update the two patches accordingly. Ejabberd now uses rebar3 by
default, so use the --with-rebar configure option to set the correct
rebar binary to use.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
[yann.morin.1998@free.fr: update .checkpackageignore]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The upstream project has been renamed from p1_yaml to fast_yaml. Use the
same name so packages that depends on it, find its content in the
fast_yaml/ directory.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The license hash has changed because of a year update at the beginning
of the file.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This package has been renamed to avoid patching the packages that expect
to find its content in the xmpp/ directory. Thus, remove the
corresponding patch in the ejabberd package.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
[yann.morin.1998@free.fr: update .checkpackageignore]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This package has been renamed to avoid patching other packages that
expect to find its content in a fast_xml/ directory. Remove the
corresponding patch from the erlang-p1-xmpp package.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
[yann.morin.1998@free.fr: update .checkpackageignore]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This package is renamed to avoid fixing other packages that expect to
find its content inside a stun/ directory instead of p1_stun/. Thus,
remove the corresponding patch from the erlang-p1-sip package.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
[yann.morin.1998@free.fr: update .checkpackageignore]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Arm Trusted Firmware (TF-A) v2.11 fails to build in some situations
with the error message:
ld: build/qemu/release/bl1/bl1.elf: error: PHDR segment not covered by LOAD segment
This error can be reproduced with the commands:
make qemu_aarch64_ebbr_defconfig
utils/config --set-str BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE v2.11
make olddefconfig
make
This issue was reported in [1].
This error is coming from a check that was made more strict since
binutils ld 2.34. This error message is normally related to dynamic
linker, so it should normally not apply to a package like TF-A.
When BR2_SHARED_LIBS=y (shared libraries only) and BR2_PIC_PIE=y
(Build code with PIC/PIE), the Buildroot toolchain-wrapper will try
to enable position-independent code/executables. See [2]. This
configuration is a common default.
Arm Trusted Firmware (TF-A) build system, on its side, tries to detect
if the toolchain enables PIE automatically. It does so by checking if
--enable-default-pie is in the output of "$(CC) -v". If found, the TF-A
build system tries to disable PIE globally (it can be explicitly
enabled again with the ENABLE_PIE=1 build variable, in some specific
configurations). This detection mechanism is not working with the
Buildroot toolchain wrapper which is enabling PIE silently. See [3].
Commit 1061ed6c "boot/arm-trusted-firmware: add -fno-PIE to CFLAGS"
added the option -fno-PIE in CFLAGS for that reason. See [4].
TF-A >= v2.11 now needs the same treatment for LDFLAGS. This is
because TF-A switched the default linker from "ld" to "gcc", in
upstream commit [5]. This change makes the Buildroot toolchain wrapper
to enable PIE at link, without passing the "--no-dynamic-linker" option
that would normally avoids this ld error.
Also, even if there is no defconfigs using the
BR2_TARGET_ARM_TRUSTED_FIRMWARE_LATEST_VERSION config directive, it is
worth mentioning that the Buildroot TF-A "latest version" was updated
to v2.11 in commit 9c50759cd "boot/arm-trusted-firmware: bump to
v2.11". See [6]. This latest version is the default choice. So
Buildroot is subject to generate this build failure. This can be
reproduced with the commands:
cat <<EOF >.config
BR2_aarch64=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="qemu"
BR2_TOOLCHAIN_EXTERNAL=y
EOF
make olddefconfig
make arm-trusted-firmware
This commit fixes the issue by adding the option "-no-pie" in LDFLAGS.
This will prevent the Buildroot toolchain wrapper to enable PIE, for
versions using "gcc" as a linker. This change should also remain
compatible with older TF-A < 2.11 using "ld" as a linker, since
"-no-pie" is also a valid ld option.
Fixes:
ld: build/qemu/release/bl1/bl1.elf: error: PHDR segment not covered by LOAD segment
[1] https://github.com/TrustedFirmware-A/trusted-firmware-a/issues/26
[2] https://gitlab.com/buildroot.org/buildroot/-/blob/2024.08-rc3/toolchain/toolchain-wrapper.c?ref_type=tags#L403
[3] https://git.trustedfirmware.org/plugins/gitiles/TF-A/trusted-firmware-a.git/+/refs/tags/v2.11.0/Makefile#711
[4] https://gitlab.com/buildroot.org/buildroot/-/commit/1061ed6c6273e90618b05ddc0cb66be17364da33
[5] https://git.trustedfirmware.org/plugins/gitiles/TF-A/trusted-firmware-a.git/+/2f1c5e7eb1775b252fa4998e10093b8ac34ca699%5E%21/
[6] https://gitlab.com/buildroot.org/buildroot/-/commit/9c50759cd1677e1739078239a1e86fb1d62e33e8
Reported-by: Vincent Stehlé <vincent.stehle@arm.com>
Tested-by: Vincent Stehlé <vincent.stehle@arm.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add myself as maintainer so I can be notified of patches/problems/etc.
Signed-off-by: J. Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The "rgbmatrix" python module is the Python binding for
rpi-rgb-led-matrix, built from the same source repository.
Signed-off-by: J. Neuschäfer <j.neuschaefer@gmx.net>
[yann.morin.1998@free.fr:
- add comment for propagated dependencies
- add comment on missing dependencies
- drop comment at end of _VERSION line
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The rpi-rgb-led-matrix project doesn't have tagged releases, so this
patch updates the package to the latest commit on the master branch.
Signed-off-by: J. Neuschäfer <j.neuschaefer@gmx.net>
[yann.morin.1998@free.fr: drop comment at end of _VERSION line]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Even when configured for cross-compilation, the go compiler is always
able to build natively as well, and this is was we use in Buildroot to
build host go packages. This implies that when the target has
limitations, those limitations thus also apply to the host builds.
This means that, when there is no CGO linking support for the target,
the compiler is built without CGO linking support, and thus CGO linking
is also not available for the host builds.
Of course, when there is no go support for the target, the CGO linking
support only depends on the host architecture.
Add a new Kconfig symbol that repesent whether CGO linking is available
for the host; host packages can then depend on that symbol, like the
target variants do on the corresponding target symbol.
The dependencies of this symbol are a bit complicated. Fortunately,
because it is a blind symbol, we can write it with a combination of
"default y" and "depends on" statements. As mentioned, CGO for the host
is available if CGO is available for the target, but also if Go is not
available for the target at all. In addition, Go must of course be
available for the host. There are also the toolchain constraints of CGO.
We exclude MIPS64 explicitly based on BR2_HOSTARCH. For the host, we
always assume that dynamic library and threads are available so we don't
have conditions for that.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Thomas Perale <thomas.perale@mind.be>
Cc: Christian Stewart <christian@aperture.us>
Cc: Anisse Astier <anisse@astier.eu>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This version also reintroduced COPYING COPYING.LGPL, therefore add
them to IMA_EVM_UTILS_LICENSE_FILES.
The hash change in LICENSES.txt is just due to the addition of the
reference to the re-introduced COPYING and COPYING.LGPL files.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As of the 2024.05 toolchain release, the toolchain tarballs are now
xz-compressed instead of bz2-compressed. Since this script is only
meant to update to the latest toolchains, we don't really bother
supporting the older toolchains that are bz2-compressed, and we simply
assume the tarballs are xz-compressed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Buildroot is probably the only thing lightweight enough to run on
68030 machines in the current day.
Add a CPU option for the 68030.
Tested on a Motorola MVME147.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Until now only one option was shown, and we were automatically
selecting the ARC700/ARChs and LE/BE toolchains based on the
architecture selection. However now, Synopsys offers glibc/uClibc
toolchains, and we can't decide that automatically, so let's add an
explicit choice for the user to chose between the different variants
of Synopsys toolchains available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: fix glibc toolchain prompt to mention ARC HS]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Following an email exchange with Conrad Sand, one of the maintainers of
the project, I learned that version 9.900.2 has been moved to
https://sourceforge.net/projects/arma/files/retired/.
This patch fixes the package download error, waiting for a subsequent
patch that will restore the previous URL to bump to a more recent
version.
Adding the .RETIRED suffix to the downloaded tarball generated the
following error:
armadillo-9.900.2.tar.xz.RETIRED: OK (sha256: d78658c9442addf7f718eb05881150ee3ec25604d06dd3af4942422b3ce26d05)
>>> armadillo 9.900.2 Extracting
buildroot/dl/armadillo/armadillo-9.900.2.tar.xz.RETIRED | buildroot/output/host/bin/tar --strip-components=1 -C buildroot/output/build/armadillo-9.900.2 -xf -
/bin/bash: line 1: buildroot/dl/armadillo/armadillo-9.900.2.tar.xz.RETIRED: Permission denied
buildroot/output/host/bin/tar: This does not look like a tar archive
buildroot/output/host/bin/tar: Exiting with failure status due to previous errors
make[1]: *** [package/pkg-generic.mk:213: buildroot/output/build/armadillo-9.900.2/.stamp_extracted] Error 2
which required the addition of ARMADILLO_EXTRACT_CMDS to be fixed.
Finally, it was also necessary to modify the tarball's hash.
Fixes:
- http://autobuild.buildroot.org/results/d4e9e7b453960a4f62a199344b30b729a4f235bc
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since we're going to introduce external toolchains that are based on
GCC 14.x, we will need them to "depends on
!BR2_ARCH_NEEDS_GCC_AT_LEAST_15", so let's introduce this symbol
first.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds the offset argument for rootfs partiton so that it's
aligned to a 1MiB boundary, instead of using the size of the previous
u-boot partition to achieve this.
Genimage will make sure no partitions overlap. So we don't need a size
argument to limit the size of the u-boot image.
Signed-off-by: Dong Wang <wangdong115@foxmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The imx8mqevk_defconfig is failing to build the arm-trusted-firmware
package, with the error message:
plat/imx/imx8m/hab.c: In function 'imx_hab_handler':
plat/imx/imx8m/hab.c:65:57: error: array subscript 0 is outside array bounds of 'uint32_t[0]' {aka 'unsigned int[]'} [-Werror=array-bounds=]
65 | #define HAB_RVT_CHECK_TARGET_ARM64 ((unsigned long)*(uint32_t *)(HAB_RVT_BASE + 0x18))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is happening since commit dc0f721 "package/gcc: switch to 13.x
as default".
This commit fixes this build failure by updating the TF-A, U-Boot and
Linux Kernel. Note: this imx8mqevk_defconfig uses the upstream Kernel
(in contrast of the freescale_imx8mqevk_defconfig which is using the NXP
BSP Kernel version).
Also, this new uboot version needs gnutls and openssl, so the
corresponding options are added to the defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7691701411
Signed-off-by: Julien Olivain <ju.o@free.fr>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The imx8mqevk_defconfig is failing to build the arm-trusted-firmware
package, with the error message:
plat/imx/imx8m/hab.c: In function 'imx_hab_handler':
plat/imx/imx8m/hab.c:65:57: error: array subscript 0 is outside array bounds of 'uint32_t[0]' {aka 'unsigned int[]'} [-Werror=array-bounds=]
65 | #define HAB_RVT_CHECK_TARGET_ARM64 ((unsigned long)*(uint32_t *)(HAB_RVT_BASE + 0x18))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is happening since commit dc0f721 "package/gcc: switch to 13.x
as default".
This commit fixes this build failure by updating the TF-A, U-Boot and
Linux Kernel. Note: this imx8mqevk_defconfig uses the upstream Kernel
(in contrast of the freescale_imx8mqevk_defconfig which is using the NXP
BSP Kernel version).
Also, this new uboot version needs gnutls and openssl, so the
corresponding options are added to the defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7691701411
Signed-off-by: Julien Olivain <ju.o@free.fr>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux to the latest LTS version 6.6.48 and increase rootfs size to
fit kernel modules.
Signed-off-by: Mattia Narducci <mattianarducci1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update U-Boot to fix the following error when building with
python-setuptools >= 69, that is, since 6b62384e3d
("package/python-setuptools: bump to version 69.0.3"):
packaging.version.InvalidVersion: Invalid version: 'u-boot-2019.01'
make[5]: *** [scripts/dtc/pylibfdt/Makefile:27: scripts/dtc/pylibfdt/_libfdt.so] Error 1
make[4]: *** [scripts/Makefile.build:434: scripts/dtc/pylibfdt] Error 2
make[4]: *** Waiting for unfinished jobs....
make[3]: *** [scripts/Makefile.build:434: scripts/dtc] Error 2
make[2]: *** [Makefile:508: scripts] Error 2
make[1]: *** [package/pkg-generic.mk:289: output/build/uboot-2019.01/.stamp_built] Error 2
make: *** [Makefile:83: _all] Error 2
Use SPL and U-Boot FIT image combined into u-boot-sunxi-with-spl.bin.
Do not use the optional System Control Processor (SCP) firmware pointing
the SCP env variable to /dev/null.
Signed-off-by: Mattia Narducci <mattianarducci1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Hardware offload in Linux macsec driver is enabled in compile time if
libnl version is >= v3.6. However this is not enough for successful
build since enum 'macsec_offload' has been added to Linux headers only
since Linux >= v5.7.
Add upstream commit that extends compile time condition for the
enablement of the macsec hardware offload adding Linux headers version
check.
Fixes:
- http://autobuild.buildroot.net/results/b59d5bc5bd17683a3a1e3577c40c802e81911f84/
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Enable DHCP for eth0.
This is perfectly fine even for users that are not using the Ethernet
on the rock5b, as in that case, udhcpc will simply fork to background
without delaying the boot.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This board has an optional eMMC module.
Use PARTLABEL to specify the rootfs, as this works regardless of the mmc
device probe order.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Partition table hybrid means GPT + MBR.
There is no need to keep the MBR when using GPT, so migrate to GPT only.
This change also requires us to migrate from partition-type to
partition-type-uuid, otherwise genimage won't generate an image.
Note that GPT itself always writes a "protective MBR" at LBA 0.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Just a simple clone and pull with --depth 1 should be enough to parse
the CVE data and generate the pkg-stats report.
From a full clone and a depth-1 clone, and the size delta is 2.9GiB
vs. 2.2GiB.
The download size does change: from 983.55MiB down to 270.78MiB.
It's a net time win too: 2m17s vs 1min7s (on a 100Mbps link).
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit switches the gobject-introspection package from using
prelink-cross to simply using "objdump -p". This basically implements
the same change as was done in OpenEmbedded commit:
https://git.openembedded.org/openembedded-core/commit/?id=767e0880d4d729e659e859dd99c1cdb084b8ba51
In particular, this allows to get rid of the architecture dependency
of prelink-cross, which wasn't currently encoded, but that was
actually causing failures such as:
/home/autobuild/autobuild/instance-17/output-1/host/sbin/prelink-rtld: error while loading shared libraries: /lib/libc.so.6: cannot handle TLS data
It also paves the way for removing host-prelink-cross entirely, as the
only remaining user of it now is dracut.
The test tests.package.test_python_gobject.TestPythonPy3Gobject (which
uses gobject-introspection) has been tested to run fine after this
commit.
Fixes:
http://autobuild.buildroot.net/results/7efa6a18f543752dfe33577f74c20bda3f8b1e65/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 6889056f1e (support/scripts/genimage.sh: support creating a bmap
image) added unconditional gzip compression of the genimage outputs if
bmap-tools is enabled, which is problematic for a number of reasons:
- The gzip invocation is not reproducable (E.G. does not use -n)
- The original file is removed, dropping the sparse info
- It hardcodes policy, E.G. bmap supports a number of different compression
algorithms / compression may not be desired for all images / different
compression levels may be desired
So drop the compression step. If desired, compression can be done with a
post-image script.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: TIAN Yuanhao <tianyuanhao3@163.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Patch v1 not set to 'superseded' when replying to <message-id> with v2.
I'm using git version 2.46.0. The manual says the following is the
correct way to use the '--in-reply-to' option:
git send-email --in-reply-to=<message-id>
Signed-off-by: Roy Kollen Svendsen <roykollensvendsen@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the proper firmware to avoid the following warning + error during
boot:
r8169 0004:41:00.0: Direct firmware load for rtl_nic/rtl8125b-2.fw failed with error -2
r8169 0004:41:00.0: Unable to load firmware rtl_nic/rtl8125b-2.fw (-2)
Note that the NIC appears functional even without the proper firmware.
However, add the firmware anyway, since the error messages are distracting
and clutters dmesg.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Do not let the kernel mount the rootfs as rw.
There is no need for this, and init will remount the rootfs as rw anyway.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The ext4 rootfs is mounted as ext4 perfectly fine without rootfstype
specified on the kernel command line.
In order to keep the kernel command line clean, remove the superfluous
kernel parameter.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to the latest 9.x version. Protobuf is now mandatory.
The COPYING file has evolved to expose more details: the respective
licenses are now listed, except for the GPLv3 license. The GPLv3
license is only required when FRR is compiled with the GCC plugin that
extends printf type checks. This plugin should not be enabled for
production code. For more information, see FRR's workflow.rst
document.
Signed-off-by: Vincent Jardin <vjardin@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to U-Boot 2024.07 and kernel 6.10.6 versions.
As kernel 6.10 fixes the USB kernel hang, remove the original patch.
Also convert it to use extlinux.conf file.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The imx25pdk board has been removed from U-Boot and I no
longer have access to the board.
Remove its support.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This release includes a fix for CVE-2022-45145. Also, a copyright date
in the LICENSE file changed, so the hash for it has changed too.
Signed-off-by: Woodrow Douglass <wdouglass@carnegierobotics.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To fix build issues with modern Python versions, commit
8012a86f5c ("package/norm: use external
waf") switched the norm package from using its internal waf copy to
using our external waf package.
Then, in fd5623150d ("package/waf: bump
to v2.1.1"), we updated out external waf to a newer version, which
breaks the API around ArgParse, see upstream commit:
https://gitlab.com/ita1024/waf/-/commit/bd5c22d484734f7c1b77e16c91a10c7a44fa6c8a:
This causes breakage when building the norm package. Fabrice had
already submitted patches upstream, to both the "protolib"
project (which is used as a submodule in norm) and to the "norm"
project. These pull requests are still pending, but let's backport the
patches that seem reasonable and that fix the build issue.
Fixes:
http://autobuild.buildroot.net/results/f005d513434d42d26e601096b94b4070586118b2/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Replace the group name 'nogroup' with 'nobody' in the default ProFTPD
configuration file. This fixes the following error when starting the
server:
proftpd[110]: fatal: Group: Unknown group 'nogroup' on line 30 of '/etc/proftpd.conf'
Fixes: 0d887cc2b4 ("system: replace nogroup with nobody")
Signed-off-by: Mattia Narducci <mattianarducci1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2024-31080: Heap buffer overread/data leakage in ProcXIGetSelectedEvents
- CVE-2024-31081: Heap buffer overread/data leakage in ProcXIPassiveGrabDevice
- CVE-2024-31082: Heap buffer overread/data leakage in ProcAppleDRICreatePixmap
- CVE-2024-31083: User-after-free in ProcRenderAddGlyphs
For more details, see thee security page of Xorg:
https://www.x.org/wiki/Development/Security/
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Peter: add actual list of CVEs]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The new version from peter@digitalbrains.com adds some few new
features (name, offset, etc.) and it includes a few improvements.
The former version was more than 14y old.
There is no tag, neither any archive, so currently we use the latest
git commit.
Signed-off-by: Vincent Jardin <vjardin@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tweaking this variable should allow us to get better coverage of
packages with larger dependency trees.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Enabling the option correctly select the python-curses module dependency
of the viewer tool.
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes https://gitlab.com/buildroot.org/buildroot/-/jobs/7644930127
ERROR: No hash found for arm-trusted-firmware-v2.10-git4.tar.gz
Commit d037d9c2d6 (configs/qemu: Update defconfigs to Linux 6.6.32)
enabled BR2_DOWNLOAD_FORCE_CHECK_HASHES, but forgot to take into
consideration that qemu_aarch64_ebbr_defconfig uses arm-trusted-firmware
v2.10 since commit 73813c56c8 (configs/qemu_{arm, aarch64}_ebbr: bump
Linux, U-Boot and TF-A).
Add the hash to fix the build.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
After the official fbv download page is no longer available switch to
an hopefully active github fork.
Changes made to the Buildroot package:
- new active upstream fork (6 month old commits)
- use autoreconf to create configure
- remove all patches because they are no longer required
- upstream removed GIF support, so remove it here too
- license is unchanged, but full COPYING file is now included
Tested on a RPI5 with a PNG, BMP and JPEG picture.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
I lack the time (and interest) to properly keep these entries up to
date, so drop them from my section.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The mysql virtual package was removed in commit 8708f3a23a
"package/mysql: drop virtual package".
The mariadb runtime test was authored before this mysql virtual
package removal, but was merged after it, in commit 5356754d1e
"support/testing: add mariadb runtime test". Due to this, this test
always failed with the error:
Makefile.legacy:9: *** "You have legacy configuration in your .config! Please check your configuration.". Stop.
This commit fixes the issue by removing the legacy
BR2_PACKAGE_MYSQL=y configuration directive.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7540345406
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
/home/buildroot/autobuild/instance-0/output-1/host/lib/gcc/m68k-buildroot-linux-uclibc/13.3.0/../../../../m68k-buildroot-linux-uclibc/bin/ld: cannot find -lssp_nonshared: No such file or directory
/home/buildroot/autobuild/instance-0/output-1/host/lib/gcc/m68k-buildroot-linux-uclibc/13.3.0/../../../../m68k-buildroot-linux-uclibc/bin/ld: cannot find -lssp: No such file or directory
collect2: error: ld returned 1 exit status
make[4]: *** [Makefile:425: ledctl] Error 1
http://autobuild.buildroot.net/results/969b62c89bc37326260fb23c5652e21c0662cba2/
This issue exists since upstream commit
940149a9b53627ceabe67b01aac2859fb7c6fde0 ("Add compiler defenses
flags (#145)"), which has added -fstack-protector-strong to the flags
tested and used if supported. This commit first appeared in v1.0.0,
which is used by Buildroot since commit
b3819b761f (which first appeared in
2024.05).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
For this package, we're downloading from the CVS repository viewer,
but it is gone. The only way would be to download from the CVS
repository itself, but really upstream is completely dead, and this
package has seen no update since it has been introduced in 2013, so
let's get rid of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The following build failure on xtensa:
Waf: Entering directory `/home/buildroot/instance-0/output-1/build/ntpsec-1.2.3/build/host'
[1/2] Processing ntpd/ntp_parser.y
[2/2] Compiling build/host/ntpd/ntp_parser.tab.c
gcc: error: unrecognized command-line option '-mlongcalls'
gcc: error: unrecognized command-line option '-mauto-litpools'
reveals that the target's CFLAGS are being used for host compilation.
The patch fixes the host compilation by correctly setting the CFLAGS to
be used.
It should be noted that the build script used by ntpsec applies CFLAGS
for host compilation and --cross-cflags for target compilation.
Fixes:
- http://autobuild.buildroot.org/results/9321a637f2c340ce8dcb24249676bb6c44d0dfc6
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Eudev can be built without kmod support, E.G. for setups not using a
modular kernel - So support that.
Make the option default y for backwards compatibility.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
eudev itself includes dlfcn.h, so even without kmod it cannot be built
statically:
grep -rs dlfcn build/eudev-3.2.14/src
eudev-3.2.14/src/shared/util.c:#include <dlfcn.h>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 2f260084d5 (utils/genrandconfig: remove support for toolchain
CSV) kept the --no-toolchains-csv option, but in the rework forgot to
keep it as a bool, while argparse default is to expect a string.
Rather than re-introduce the action="store_true" which implies the
argument is a bool, explicit make it a bool.
Fixes: 2f260084d5
Reported-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump of systemd from 254.13 to 256.4, systemd no longer
builds with gcc <= 7:
../src/basic/mountpoint-util.c: In function ‘fstype_is_api_vfs’:
../src/basic/macro.h:385:79: error: expected ‘}’ before ‘__VA_OPT__’
for (typeof(entry) _va_sentinel_[1] = {}, _entries_[] = { __VA_ARGS__ __VA_OPT__(,) _va_sentinel_[0] }, *_current_ = _entries_; \
^
This first error is due to upstream commit
dc571cccd75db7be49b2aada64baf92e3a498c39 ("macro: terminate the
temporary VA_ARGS_FOREACH() array with a sentinel"), which was made to
support GCC 14.x. If we revert this commit, then this particular issue
goes away with GCC 7.x, but then it fails with another fairly similar
issue elsewhere:
../src/shared/varlink-idl.h:110:41: error: implicit declaration of function ‘__VA_OPT__’; did you mean ‘__TA_IBIT__’? [-Werror=implicit-function-dec
laration]
.fields = { __VA_ARGS__ __VA_OPT__(,) {}}, \
^
This code was added by upstream commit
e50b2a93d66eff9b41999d38b8ed5eb647e2d74c ("varlink: add
IDL/introspection logic").
Upstream commit dc571cccd75db7be49b2aada64baf92e3a498c39 first
appeared in v256, while e50b2a93d66eff9b41999d38b8ed5eb647e2d74c first
appeared in v255.
Considering systemd usual policies with the support of "old" things,
it's fairly unlikely that they will care about building with older gcc
versions. They even document in
https://github.com/systemd/systemd/blob/main/README that they need gcc
>= 8.4, so let's follow that.
Fixes:
http://autobuild.buildroot.net/results/53c1a79c391e3cc7c230017853ba935202c8d20d/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Disable RNG support so that following build failure does not happen:
In file included from ../../../../src/libstrongswan/plugins/plugin.h:28,
from wolfssl_plugin.h:34,
from wolfssl_plugin.c:29:
wolfssl_plugin.c: In function 'get_features':
../../../../src/libstrongswan/plugins/plugin_feature.h:321:119: error: 'FEATURE_WC_RNG' undeclared (first use in this function); did you mean 'FEATURE_RNG'?
321 | #define __PLUGIN_FEATURE_REGISTER(type, _f) (plugin_feature_t){ FEATURE_REGISTER, FEATURE_##type, .arg.reg.f = _f }
| ^~~~~~~~
../../../../src/libstrongswan/plugins/plugin_feature.h:332:73: note: in expansion of macro '__PLUGIN_FEATURE_REGISTER'
332 | #define _PLUGIN_FEATURE_REGISTER_RNG(type, f) __PLUGIN_FEATURE_REGISTER(type, f)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
../../../../src/libstrongswan/plugins/plugin_feature.h:248:39: note: in expansion of macro '_PLUGIN_FEATURE_REGISTER_RNG'
248 | #define PLUGIN_REGISTER(type, f, ...) _PLUGIN_FEATURE_REGISTER_##type(type, f, ##__VA_ARGS__)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
wolfssl_plugin.c:510:17: note: in expansion of macro 'PLUGIN_REGISTER'
510 | PLUGIN_REGISTER(RNG, wolfssl_rng_create),
| ^~~~~~~~~~~~~~~
../../../../src/libstrongswan/plugins/plugin_feature.h:321:119: note: each undeclared identifier is reported only once for each function it appears in
321 | #define __PLUGIN_FEATURE_REGISTER(type, _f) (plugin_feature_t){ FEATURE_REGISTER, FEATURE_##type, .arg.reg.f = _f }
| ^~~~~~~~
../../../../src/libstrongswan/plugins/plugin_feature.h:332:73: note: in expansion of macro '__PLUGIN_FEATURE_REGISTER'
332 | #define _PLUGIN_FEATURE_REGISTER_RNG(type, f) __PLUGIN_FEATURE_REGISTER(type, f)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
../../../../src/libstrongswan/plugins/plugin_feature.h:248:39: note: in expansion of macro '_PLUGIN_FEATURE_REGISTER_RNG'
248 | #define PLUGIN_REGISTER(type, f, ...) _PLUGIN_FEATURE_REGISTER_##type(type, f, ##__VA_ARGS__)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
wolfssl_plugin.c:510:17: note: in expansion of macro 'PLUGIN_REGISTER'
510 | PLUGIN_REGISTER(RNG, wolfssl_rng_create),
| ^~~~~~~~~~~~~~~
make[6]: *** [Makefile:659: wolfssl_plugin.lo] Error 1
Reported Upstream:
https://github.com/strongswan/strongswan/issues/2410
This build failure started since 5.9.11 update in commit
78959665b9.
Fixes:
http://autobuild.buildroot.net/results/278b3f74c48c858ae368d59069752adb69c05246
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since upstream commit
5c57a8650630304d8434a348283b6b643fbc676b ("vmspawn: add support for
-D/--directory"), src/vmspawn/vmspawn-util.h defines a
QEMU_MACHINE_TYPE based on the architecture, and not all architectures
are supported. This commit first appeared in systemd v256.
Due to this, the unsupported architectures fail with:
In file included from ../src/vmspawn/vmspawn-util.c:27:
../src/vmspawn/vmspawn-util.h:46:4: error: #error "No qemu machine defined for this architecture"
46 | # error "No qemu machine defined for this architecture"
| ^~~~~
So let's add a BR2_PACKAGE_SYSTEMD_VMSPAWN_ARCH_SUPPORTS and use it to
ensure vmspawn support is only used on architectures that are
supported. Even though no-one selects BR2_PACKAGE_SYSTEMD_VMSPAWN (and
would therefore need to inherit the
BR2_PACKAGE_SYSTEMD_VMSPAWN_ARCH_SUPPORTS dependency), we nevertheless
introduce BR2_PACKAGE_SYSTEMD_VMSPAWN_ARCH_SUPPORTS to make the
depency list prettier than a long "depends on A || B || C || D ||
...".
Fixes:
http://autobuild.buildroot.net/results/0e614375f731f7bfe3c6041c6e89a09c31898053/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit is suitable for master because:
$ git log --format=oneline v1.4.0-rc2..v1.4.0
eace095b15eb034e42d97202cad70ce979d8ca38 VERSION: Update version to 1.4.0
30c85a62c1abe07d57d5a7b523ef62c2c5b825c9 doc: Release notes for version 1.4.0
e4e0fd0d8232260af052fde52a9fb636181b2e2e meson: Fix project name as flashrom
And it looks nicer to have a final 1.4.0 release than a 1.4.0-rc2
release candidate.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Converting the pmufw.elf to a binary works with any objcopy, regardless
if it's from the host or cross-compiler. Prefer to use the
$(TARGET_OBJCOPY) as it's always available and reproducible.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Reviewed-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For a change log since 0.29.1, see:
https://github.com/iovisor/bcc/blob/v0.31.0/debian/changelog
This commit also changes BCC_SITE_METHOD to "git". This is because the
upstream source archive name does not contain the version. It is
always named "bcc-src-with-submodule.tar.gz" in all releases. If using
the https _SITE_METHOD, bumping the version will not download the new
version if the directory BR2_DL_DIR contains an old one, with the same
name. Since the upstream repository uses git submodules, this commit
also adds "BCC_GIT_SUBMODULES = YES".
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When building these boards with BR2_PER_PACKAGE_DIRECTORIES enabled,
the following error occurs from U-Boot.
tools/mkeficapsule.c:18:10: fatal error: uuid/uuid.h: No such file or directory
18 | #include <uuid/uuid.h>
| ^~~~~~~~~~~~~
The U-Boot defconfig these boards use 'xilinx_zynqmp_kria' enables
CONFIG_EFI_CAPSULE_ON_DISK, which requires util-linux.
This doesn't fail when BR2_PER_PACKAGE_DIRECTORIES is disabled. This
is because host-e2fsprogs requires host-util-linux, and
host-util-linux always builds before host-uboot when single-threaded.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Reviewed-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since 2014 e4defrag was only available for musl/glibc
toolchains in commit d770abad33.
I believe sync_file_range() was already available in 2015 in the uClibc time.
So enable e4defrag. Tested in Qemu on a ext4 filesystem.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Revert the upstream wpa_supplicant commit 41638606054 ("Mark
authorization completed on driver indication during 4-way HS offload").
That commit breaks WPA2-PSK and WPA3-SAE for brcfmac driver in upstream
Linux kernels. For details refer to the hostapd mailing list discussion
and redhat bugzilla:
- http://lists.infradead.org/pipermail/hostap/2024-August/042893.html
- https://bugzilla.redhat.com/show_bug.cgi?id=2302577
Alternative option would be to disable offload in brcmfmac driver
adding "brcmfmac.feature_disable=0x82000" to Linux command line.
Final decision is not yet agreed upon on the hostapd mailing list,
but reporter and maintainer are inclined to revert the patch. So this
change adds revert to Buildroot to improve user experience for such
boards as Orange Pi Zero Plus2, BananaPro, and others. Later on the
patch will be updated according to hostapd upstream changes.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Flashrom requires --default-library=both for the cli when building
with BR2_SHARED_LIBS.
As such set --default-library=both instead of disabling it.
The cli was disabled in 8637884057 to
work around a cli build issue which this fixes.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Right now, genrandconfig just spits out the random messages from the
different make invocations, which isn't terribly useful. Instead,
let's redirect the output of make invocations to oblivion, and add
some more high level logging.
As part of this logging, we're interested to see how many iterations
were needed to find a valid configuration, so changed the loop logic
to count from 0 to 100 instead of from 100 to 0 so that we can easily
show the iteration number.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In order to test that upstream sites are still working, we need to NOT
fallback to sources.buildroot.net for some builds.
As there is anyway a local cache in the autobuilder instances, we need
to do quite a lot of builds without any BR2_BACKUP_SITE configured to
have a chance to catch issues, which is why a 50% chance is used to
unset BR2_BACKUP_SITE.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Before calling randpackageconfig/randconfig, we were pre-generating a
snippet of .config with:
(1) minimal.config
(2) BR2_CURL/BR2_WGET settings
(3) some random selection of init system, debug, runtime debug, etc
(4) enabling BR2_REPRODUCIBLE=y when diffoscope was found
Now that we only use randconfig, this whole fine-tuning is completely
irrelevant, as it gets overridden by "make randconfig".
(1) and (3) above are useless, as randconfig does all the
randomization that is needed.
However, we want to preserve (2) and (4) above, so we re-implement
those fixups, but *after* randconfig has done its job.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now that the support for generating a fully random configuration has
been well-tested, the whole mechanism based on a toolchain CSV isn't
really useful anymore, so let's drop it to simplify the logic.
Note that the autobuilder code still uses --{,no-}toolchains-csv, so we
can't remove those or the autobuilders would fail. Once all supported
branches no longer use those argumetns, we can drop them from the
autobuilder code, then ask people to update their runners, and we will
finally be able to drop those arguments. Eventually.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: keep --{,no-}toolchains-csv and explain why]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We have accumulated a whole bunch of very old fixups to avoid issues
with super old CT-NG toolchains, which we are not testing anymore, so
remove those fixups.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The LICENSE file gets installed directly to the root of $(TARGET_DIR),
which clashes with other packages:
FileExistsError: File already exists: /home/autobuild/autobuild/instance-3/output-1/target/LICENSE
This commit fixes this issue for the python-unittest-xml-reporting
package. Other fixes will be needed for the other patches.
The issue in python-unittest-xml-reporting was introduced in upstream
commit c43427611390fba83ca13fbb5311bd8fece5048f, which first appeared
in v3.1.0. We switched from a pre-3.1.0 version to 3.2.0 in Buildroot
in commit 69ba1562d5, which was merged
in 2023.02.
Fixes:
http://autobuild.buildroot.net/results/2c91243b440087bbc7d051d65f553f59d05dd207/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit brings two patches that have been submitted to upstream
libffi by Synopsys people, to fix libffi build issues on ARC.
This build issue was introduced by upstream commit
c4df19c99f8d8841942e3edaadbf331d30e298c8, which landed in libffi
3.4.5, so the issue exists in Buildroot since we bumped from libffi
3.4.4 to 3.4.6 in commit f382de2b0f,
which landed in Buildroot 2024.05. This issue therefore doesn't exist
in the 2024.02.x LTS branch.
Fixes:
http://autobuild.buildroot.net/results/3accebc6775b9a479876a5898d55bde005d4b12b/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The python-huepy has an incorrect data_files statement in its
setup.py, causing the LICENSE file to be installed directly as
$(TARGET_DIR)/LICENSE. This was detected because several packages were
doing this, and the second package doing
it (python-unittest-xml-reporting, fixed separately) was erroring out
when trying to overwrite this already existing file.
This commit fixes the case of python-huepy by adding a patch that has
been submitted upstream.
There are no autobuilder failures related to python-huepy, but this
was detected while fixing
http://autobuild.buildroot.net/results/2c91243b440087bbc7d051d65f553f59d05dd207/
for python-unittest-xml-reporting.
This bug has been in huepy since at least 2018, so this patch can be
backported to previous Buildroot versions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
lib/print.c in gnu-efi contains some floating point computation. On
ARM soft-float configurations, these floating point operations
generate calls to __eabi_*() functions that are provided by
gcc. However, gnu-efi builds some freestanding code, so it doesn't
link with libgcc, and therefore the build fails with:
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1431:(.text+0x78c): undefined reference to `__aeabi_i2d'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1431:(.text+0x7a0): undefined reference to `__aeabi_dsub'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1431:(.text+0x7a4): undefined reference to `__aeabi_d2f'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1432:(.text+0x7b4): undefined reference to `__aeabi_fcmplt'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1438:(.text+0x7c8): undefined reference to `__aeabi_fmul'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1440:(.text+0x7d4): undefined reference to `__aeabi_fcmpeq'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1444:(.text+0x7f8): undefined reference to `__aeabi_fmul'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1440:(.text+0x808): undefined reference to `__aeabi_fcmpeq'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1440:(.text+0x818): undefined reference to `__aeabi_f2iz'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1451:(.text+0x834): undefined reference to `__aeabi_i2f'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1451:(.text+0x840): undefined reference to `__aeabi_fcmpeq'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1453:(.text+0x858): undefined reference to `__aeabi_fmul'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1451:(.text+0x860): undefined reference to `__aeabi_f2iz'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1451:(.text+0x868): undefined reference to `__aeabi_i2f'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1451:(.text+0x870): undefined reference to `__aeabi_fcmpeq'
arm-buildroot-linux-gnueabi-ld: /output-1/build/gnu-efi-3.0.18//lib/print.c:1451:(.text+0x89c): undefined reference to `__aeabi_f2iz'
Since we don't care about gnu-efi support on ARM soft-float
configurations, let's disable such configurations.
Note that we have chosen to use BR2_ARM_SOFT_FLOAT as we're for now
making this specific to ARM as we're not sure what is the situation on
other CPU architectures (for example RISC-V without FPU maybe). This
can be revisited once we get more data on the behavior on other CPU
architectures that can support soft-float.
Fixes:
http://autobuild.buildroot.net/results/98d955fd2fcf4a3db1ab46e4f553447031a23b92/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since commit
1f7c581454 ("package/gnu-efi: enable on
RISC-V 64-bit"), we allow building on RISC-V... and that includes
noMMU RISC-V. This unfortunately fails badly with:
/home/autobuild/autobuild/instance-2/output-1/host/bin/../riscv64-buildroot-linux-uclibc/bin/ld.real: unrecognized option '-Wl,-elf2flt=-r'
/home/autobuild/autobuild/instance-2/output-1/host/bin/../riscv64-buildroot-linux-uclibc/bin/ld.real: use the --help option for usage information
Since we're anyway not interested in gnu-efi on noMMU platforms, let's
not even spend time on trying to fix this and make MMU support a
requirement for gnu-efi.
Fixes:
http://autobuild.buildroot.net/results/8b4a503939bdbe773ceee69e01a3ea16873a75fa/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since the bump of gnu-efi to version 3.0.17 in Buildroot commit
fa9893ad8f, the build of gnu-efi fails
on ARM big endian and AArch64 big endian.
Indeed, since that bump, gnu-efi builds some "apps", using a special
linker file part of gnu-efi that explicitly sets the architecture:
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
OUTPUT_FORMAT("elf64-littleaarch64", "elf64-littleaarch64", "elf64-littleaarch64")
Due to this, big endian builds are now failing:
armeb-buildroot-linux-gnueabi-ld: ../gnuefi/crt0-efi-arm.o: compiled for a big endian system and target is little endian
armeb-buildroot-linux-gnueabi-ld: failed to merge target specific data of file ../gnuefi/crt0-efi-arm.o
Since we are not really interested in supporting gnu-efi on ARM big
endian and AArch64 big endian and it is not supported upstream, let's
disabled on those architectures.
Fixes:
http://autobuild.buildroot.org/results/4d385d6759346e19664d0bded1e419f004f82b47/ (ARM big endian)
http://autobuild.buildroot.net/results/b6df43408ca4cd469962c96d49d9ac7935b6dbe9/ (AArch64 big endian)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In commit
c72c6f26ed ("package/python-tpm2-pytss:
new package"), when the package was introduced, a dependency of a
package being selected was not properly propagated:
BR2_PACKAGE_PYTHON_CRYPTOGRAPHY depends on
BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS, so we should replicate
this dependency.
Fixes:
WARNING: unmet direct dependencies detected for BR2_PACKAGE_PYTHON_CRYPTOGRAPHY
Depends on [n]: BR2_PACKAGE_PYTHON3 [=y] && BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS [=n]
Selected by [y]:
- BR2_PACKAGE_PYTHON_TPM2_PYTSS [=y] && BR2_PACKAGE_PYTHON3 [=y] && !BR2_STATIC_LIBS [=n]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The rsyslog package enables extra plugins based on the availability of
external dependencies. However, there are many cases where those
plugins are not needed, even when some of those external dependencies
are enabled. Allow disabling the build of plugins. This option is
useful in embedded systems to achieve compact footprint.
Signed-off-by: Konstantin Menyaev <KAMenyaev@salutedevices.com>
Signed-off-by: Flávio Tapajós <flavio.tapajos@newtesc.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump the tfa, uboot and linux kernel versions used by the am64x-sk
reference board to pull in the latest bug fixes and feature additions
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump the am62ax-sk reference board to use the latest tfa, uboot and
linux kernel releases to pull in the latest bug fixes and features
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump to the latest versions of tfa, uboot and the linux kernel to pull
in the latest fixes and features for the am62x-sk reference board
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump tfa, uboot and linux to their latest versions for the beagleplay to
pull in the latest features and bug fixes for the platform
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When building these boards with BR2_PER_PACKAGE_DIRECTORIES enabled,
the following error occurs from U-Boot.
tools/mkeficapsule.c:18:10: fatal error: uuid/uuid.h: No such file or directory
18 | #include <uuid/uuid.h>
| ^~~~~~~~~~~~~
The U-Boot defconfig these boards use 'xilinx_zynqmp_virt' enables
CONFIG_MKEFICAPSULE, which requires util-linux.
This doesn't fail when BR2_PER_PACKAGE_DIRECTORIES is disabled. This
is because host-e2fsprogs requires host-util-linux, and
host-util-linux always builds before host-uboot when single-threaded.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Reviewed-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the update of ffmpeg to 6.1.1 in commit
fa36a6375d there are
a lot of microblaze build failures.
The compilation failure is triggered by GCC Bug 68485.
We need to disable optimisations, or ffmpeg would add -O3, which would
be present after the -O0 we add, overriding it.
Fixes:
- http://autobuild.buildroot.net/results/524/524cef193aec30471e55eb0eecfa39f0d6011a91
And many more.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[yann.morin.1998@free.fr: explain why --disable-optimizations]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch fixes the wrongly calculated uboot partition size in
genimage.cfg. The size should be 1016K, which is
1MB (typical partition start) - 8K(offset dictated by the bootrom).
Signed-off-by: Dong Wang <wangdong115@foxmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This brings the dockerd init script in line with the standard
Buildroot init script pattern.
Reload using SIGHUP is also supported now, note that the Docker
documentation cautions that not all parameters can be changed at
runtime (without a full restart).
Signed-off-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changes with nginx 1.26.2 14 Aug 2024
*) Security: processing of a specially crafted mp4 file by the
ngx_http_mp4_module might cause a worker process crash
(CVE-2024-7347).
Thanks to Nils Bars.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
MariaDB is failing to build since commit 6b86f076c3 "package/fmt: bump
to version 11.0.1" with output:
/buildroot/output/build/aarch64-buildroot-linux-gnu/sysroot/usr/include/fmt/base.h:1402:29: error: passing 'const fmt::v11::formatter<String>' as 'this' argument discards qualifiers [-fpermissive]
1402 | ctx.advance_to(cf.format(*static_cast<qualified_type*>(arg), ctx));
| ~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This commit is fixing the issue by adding an upstream patch, rebased
on the package version.
Fixes:
http://autobuild.buildroot.org/results/3106928a2d6b32acfb075a2840cf549a81784270/
and many others.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When building with `make -j` and PER_PACKAGE_DIRECTORIES, a race
condition occurs between xilinx-prebuilt and u-boot, resulting in the
following error.
objcopy -O binary -I elf32-little .../images/pmufw.elf .../images/pmufw.bin
objcopy: '.../images/pmufw.elf': No such file
U-Boot registers a KCONFIG_FIXUP_CMD that uses the pmufw.elf from
xilinx-prebuilt. But KCONFIG_FIXUP_CMDS does not use the normal
DEPENDENCIES, so xilinx-prebuilt is not guaranteed to have run before
fixup.
Instead move the `objcopy` call out to a PRE_BUILD_HOOK so it will run
after xilinx-prebuilt has finished.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Tested-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Linux kernel and U-Boot custom tarballs were updated incorrectly
in commit 45db645457. Update these to select specific release tags
instead of branches. Update the U-Boot and Linux hashes to match
these changes.
Fixes: 45db645457 ("configs/microchip_mpfs_icicle: bump Linux and
U-Boot, add hashes")
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Tested-by: Prajna Rajendra Kumar <prajna.rajendrakumar@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Linux kernel and U-Boot custom tarballs were updated incorrectly
in commit 8ce97fd550. Update these to select specific release tags
instead of branches. Update the U-Boot and Linux hashes to match
these changes.
Fixes: 8ce97fd550 ("configs/beaglev_fire: bump Linux and U-Boot")
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Tested-by: Prajna Rajendra Kumar <prajna.rajendrakumar@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since I've contributed some maintenance to s6 and other packages from
skarnet.org in the past, I'm stepping up to be notified of developments
in these packages.
Signed-off-by: J. Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since version 2.6.1.0, with another bugfix in 2.6.2.0, s6-linux-utils
can be built as a multicall binary, similar to busybox.
Signed-off-by: J. Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since version 2.3.0.0, with another bugfix in 2.3.0.3, s6-portable-utils
can be built as a multicall binary, similar to busybox.
Signed-off-by: J. Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
STM32MP15x and STM32MP13 can use almost of the same configuration
regarding bootloaders and the Linux kernel. To make profit of the
commont folder, rename it to 'stm32mp1xx' and change dependencies
accordingly.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
See this git shortlog for changes:
Dmitry Chestnykh (2):
Fix compilation with 4.x kernel headers
Group conditions after `&&`
Frank Mehnert (6):
libdl: properly cast parameters for %p format string specifier
iconv: explicit cast to `unsigned char*`
iconv: explicitly state operator precedence
ldso.c: use 'unsigned int' as loop variable type
iconv: fix parameter type of utf8seq_is_{overlong,surrogate,illegal}
iconv: prevent compiler warning during initialization with jis0208
J. Neuschäfer (1):
bits/stat.h: Declare st_mtim if defined(__USE_XOPEN2K8), everywhere
Marcus Haehnel (5):
ldso/dl-vdso: avoid compiler warning if configured without vdso
uclibc: Fix double promotion warning
libm: Fix float conversion compiler warning
features.h: add clang prerequisite macro
buildsys: allow building with gcc-14
Sven Linker (1):
c++: Remove deprecated dynamic exception specification
Valentin Gehrke (1):
arm: Replace deprecated asm instructions for ARMv8 AArch32
Waldemar Brodkorb (9):
Clang support for gnu_inline attribute
allow to use <sys/ucontext.h>
add SEEK_DATA/SEEK_HOLE
lseek: allow SEEK_DATA/SEEK_HOLE to be used
bits/stat.h: Declare st_mtim if defined(__USE_XOPEN2K8), add missing
riscv: remove incomplete context implementation, use libucontext
add memfd_create syscall wrapper
getrandom: remove __USE_GNU / add GRND_INSECURE
bump version for 1.0.50 release
Yann Le Du (1):
stdlib: increase number of static atexit handlers to 32
All buildroot patches are upstream.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
uClibc-ng systems have MSG_FASTOPEN since 2018 so no need
to disable support for TCP fastopen client mode.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Without the unbound user the daemon does not start on bootup.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Take the arguments for the daemon and the "udevadm settle" command
from variables and support defining them in /etc/default/udevd.
Signed-off-by: Simon Rowe <simon.rowe@nutanix.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For change log since 4.3.0.0, see:
https://github.com/EttusResearch/uhd/blob/v4.7.0.0/CHANGELOG
This commit removes the package patch 0002, which is now included in
this new version.
Also, uhd version 4.5.0.0 raised the minimal gcc version requirement
to 7.3.0. This change is reflected in the package dependencies.
Also, some UHD Kconfig sub-options (B100, B200, USB, USRP1) had
dependencies on gcc >= 4.9. Since the whole uhd package raised the
gcc dependency to gcc >= 7, those sub-options dependencies are now
useless. This commit removes those.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This adds the host dependency host-qt6base as host-qt6tools requires the
Qt cmake modules to be installed.
Fixes:
$ make qt6tools
(...)
CMake Error at CMakeLists.txt:21 (find_package):
Could not find a package configuration file provided by "Qt6" (requested
version 6.7.2) with any of the following names:
Qt6Config.cmake
qt6-config.cmake
Add the installation prefix of "Qt6" to CMAKE_PREFIX_PATH or set "Qt6_DIR"
to a directory containing one of the above files. If "Qt6" provides a
separate development package or SDK, be sure it has been installed.
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The download and homepage URL for this project have been
updated. The old site no longer works.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that we have integrated support for binutils 2.43, and made
binutils 2.42 the default, following our tradition, we can drop
support for binutils 2.40.
In addition to the usual things, there is an additional change
in elf2flt.mk, which had a special condition applicable to binutils
2.40, which can be removed now.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that 2.43 has been introduced, let's make 2.42 the latest version,
following the traditional Buildroot policy.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Provide correct grouping for preprocessor conditions to avoid building
ld.so with undefined macroses which are in use. This is a fix for
package/uclibc/0002-Fix-compilation-with-4.x-kernel-headers.patch.
Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Provide correct grouping for preprocessor conditions to avoid building
ld.so with undefined macroses which are in use. This is a fix for
package/uclibc/0002-Fix-compilation-with-4.x-kernel-headers.patch.
Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds the -D/--debug command line options to the
support/testing/run-tests script.
Using one of those options will pass "--log-level debug" to the
nose2 invocations. This can be useful to debug nose2 internal
behaviors. See:
https://github.com/nose-devs/nose2/blob/0.15.1/nose2/main.py#L209
For example, calling:
support/testing/run-tests --list --debug
will output:
List of tests
DEBUG:nose2.main:logging initialized debug
...
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some buildsystems (or their use of it by packages) will cause flags in
LDFLAGS to be re-orderded, or even dropped, causing some
incomprehensible mayhem... For example, gpsd [0] has this in its
SConscript [1](typoes not mines, for once):
591 # scons uses gcc, or clang, to link. Thus LDFLAGS does not serve its
592 # traditional function of providing arguments to ln. LDFLAGS set in the
593 # environment before running scons get moved into CCFLAGS by scons.
594 # LDFLAGS set while running scons get ignored.
[--SNIP--]
611 for i in ["ARFLAGS",
612 "CCFLAGS",
613 "CFLAGS",
614 "CPPFLAGS",
615 "CXXFLAGS",
616 "LDFLAGS",
617 "LINKFLAGS",
618 "SHLINKFLAGS",
619 ]:
620 if i in os.environ:
621 # MergeFlags() puts the options where scons wants them, not
622 # where you asked them to go.
623 env.MergeFlags(Split(os.getenv(i)))
So, when LDFLAGS (our TARGET_LDFLAGS) contains "-z text" (without the
quotes), that gets turned into a command line like (line-splitted for
readability):
[...]/buildroot/output/host/bin/aarch64_be-buildroot-linux-musl-gcc \
-o gpsd-3.25/drivers/driver_rtcm2.os \
-c \
--sysroot=[...]/buildroot/output/host/aarch64_be-buildroot-linux-musl/sysroot \
-O3 -g0 \
-z \
-fPIC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 \
gpsd-3.25/drivers/driver_rtcm2.c
Notice how there is a lone "-z" without any following keyword.
This then causes a build failure that looks totally unrelated [2]:
In file included from gpsd-3.25/drivers/../include/gpsd.h:36,
from gpsd-3.25/drivers/driver_rtcm2.c:65:
gpsd-3.25/drivers/../include/os_compat.h:40:8: error: redefinition of ‘struct timespec’
40 | struct timespec {
| ^~~~~~~~
In file included from [...]/buildroot/output/host/aarch64_be-buildroot-linux-musl/sysroot/usr/include/sys/select.h:16,
from gpsd-3.25/drivers/../include/gpsd.h:31:
[...]/buildroot/output/host/aarch64_be-buildroot-linux-musl/sysroot/usr/include/bits/alltypes.h:237:8: note: originally defined here
237 | struct timespec { time_t tv_sec; int :8*(sizeof(time_t)-sizeof(long))*(__BYTE_ORDER==4321); long tv_nsec; int :8*(sizeof(time_t)-sizeof(long))*(__BYTE_ORDER!=4321); };
| ^~~~~~~~
gpsd-3.25/drivers/../include/os_compat.h:48:5: error: conflicting types for ‘clock_gettime’; have ‘int(clockid_t, struct timespec *)’ {aka ‘int(int, struct timespec *)’}
48 | int clock_gettime(clockid_t, struct timespec *);
| ^~~~~~~~~~~~~
In file included from gpsd-3.25/drivers/../include/gpsd.h:33:
[...]/buildroot/output/host/aarch64_be-buildroot-linux-musl/sysroot/usr/include/time.h:104:5: note: previous declaration of ‘clock_gettime’ with type ‘int(clockid_t, struct timespec *)’ {aka ‘int(int, struct timespec *)’}
104 | int clock_gettime (clockid_t, struct timespec *);
| ^~~~~~~~~~~~~
scons: *** [gpsd-3.25/drivers/driver_rtcm2.os] Error 1
scons: building terminated because of errors.
make[1]: *** [package/pkg-generic.mk:289: [...]/buildroot/output/build/gpsd-3.25/.stamp_built] Error 2
make: *** [Makefile:83: _all] Error 2
Although undocumented, neither in gcc not ld (clang unchecked by lack of
a clang toolchain here, and by lack of clang knowledge), -z accepts the
keyword to be snatch-glued onto it, like -zkeyword, rather than be
spearated with a space. So, use that to pass -ztext.
Fixes:
http://autobuild.buildroot.org/results/c03/c039989947b960ac6af17c87090366abc26dcb6d/http://autobuild.buildroot.net/results/bc35d3e7b0e8c59c776652070650af3c749250ee/
[0] Our other scons-based package, mongodb, does not build for another
reason that probably hides the same issue as seen with gpsd.
[1] As explained in gpsd's SConscript (se above), Scons does play tricks
with variables:
https://scons.org/doc/production/HTML/scons-man.html#f-MergeFlagshttps://scons.org/doc/production/HTML/scons-man.html#f-ParseFlags
Quoting:
Flag values are translated according to the prefix found, and added
to the following construction variables:
[...]
-Wl, LINKFLAGS
[...]
- CCFLAGS
[...]
Any other strings not associated with options are assumed to be the
names of libraries and added to the $LIBS construction variable.
So in our case, it finds that -z is an unknown option that matches the
'-' prefix, so it is added to CFLAGS, while 'text' is a string on its
own, so added to LIBS, and thus it would try to link with -ltext
(supposedly, because we do not even go that far). Funnily enough, we can
se that "-Wl," is a known option prefix, that is added to LINKFLAGS (to
properly be used with gcc or clang, not ld).
As a consequence, gpsd's buildsystem does drop -ztext from the link
flags, and only passes it to the compile flags, which brings us back to
before we banned textrels in a1a2f498d7 (package/Makefile.in: ban
textrels on musl toolchains). Fixing gpsd is a task for another,
separate patch...
[2] I spent quite some time to look at recent, time-related changes in
Buildroot, especially due to the infamous time64_t issues... Alas, that
was not related, and only a git-bisect pinpointed the actual issue. Poor
polar bears...
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: J. Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: J. Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Migrate the zynqmp_zcu106_defconfig to rev1.0 ddr memory, since all new boards
will be using the rev1.0 ddr memory.
This patch also adds documentation in the board/zynqmp/readme.txt explaining
the issue related to the change in ddr memory. Should users not see anything
printing from the board during boot, the most likely issue is that the board
has the original ddr memory and the u-boot device tree needs to be configured
accordingly to revA.
Original DDR Memory:
BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=zynqmp-zcu106-revA"
More information regarding this issue can be found here:
https://support.xilinx.com/s/article/71961?language=en_US
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As of commit e35f29177495131f0f598fc7ae1ffd74d89edf15, the dynamic-layouts
example has been removed from the flutter-packages repository, which fixes
https://github.com/flutter/flutter/issues/148979.
The exact reasoning is as follows:
```
The dynamic_layouts package is unpublished, and its core feature set has not
been updated in years.
Though it's not high-traffic, all packages in that repo require maintenance
for Flutter versions, gradle bumps, and project migrations.
```
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add `"download_fuchsia_deps": False` to the dot-gclient file as this is
for linux, not fuchsia, so the dependencies are not necessary.
Also, change various paths in flutter-engine.mk to ensure that the package
builds correctly.
Remove patch
0005-skip-configuration-dependency-if-unit-tests-are-disa.patch which
is upstream.
Tested with tests.package.test_flutter.TestFlutter.test_run
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As of https://github.com/flutter/engine/pull/51943, by default, flutter now
uses and provides the AOT snapshot frontend server instead of the
frontend_server.dart.snapshot.
The depfile produced by dart has been renamed from kernel_snapshot.d to
kernel_snapshot_program.d.
Flutter programs must compile with the dartaotruntime binary instead of the
dart binary, or else errors occure stating that the dartaotruntime must be
used.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds license information, and license file hashes for LTS
versions, by using per-version directories.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There is a new lts-v2.10.x branch. Add it to the selection
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
bump the lts-v2.8.x branch to v2.8.20. Our patch still applies.
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ARM_TRUSTED_FIRMWARE_SITE is currently pointing to the deprecated
ARM-software github read-only mirror[0] which is no longer publishing
new tags. They do have a newer github mirror under the TrustedFirmware-A
organization[1] which continues to receive tag updates we could use
however because of the way github generates tarballs changing the SITE
to point to TrustedFormware-A changes the pre-calculated hash values
for every version for everyone.
Without much way around changing all hash values if we want these latest
tags, lets drop the github mirrors and move to the official git
source[2] so we can download real tarballs which shouldn't change even
if the ARM_TRUSTED_FIRMWARE_SITE moves again and hopefully preventing
this from ever happening again.
[2] https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/
[1] https://github.com/TrustedFirmware-A/trusted-firmware-a
[0] https://github.com/ARM-software/arm-trusted-firmware
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 7f0af11cee (support/testing/tests/package/test_flutter.py: new
runtime test) added a simple test that just checked that the systemd
unit launching the application, was active.
It is perfectly possible, from a systemd perspective, that the unit is
active, while the application actually crashes.
Instead, what we need to check, is that the application does actually
render "something"; we don't really care what, as long as we know it is
actually rendering, thus the graphical stack is working and the
aplication stack is running.
Extend the flutter runtime test to also check that the framebuffer is
modified by the application when it is running, similarly to what we do
in the weston test.
We drop the activation of the unit and start it manually, as we want to
check the state of the CRC before, while, and after the application
runs.
We also need to disable the blinking cursor on the console, or we would
not be able to detect whether a change in CRC is due to the application
starting rendering, or to the cursor blinking. We tell the kernel to
disable the cursor with the appropriate kernel command line parameter.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Adam Duskett <aduskett@gmail.com>
Reviewed-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In 4edb0e3456 (support/testing/tests/package/test_weston.py: new
runtime test), the weston test was introduced, and thus was the first
that needed to test that rendering was happening.
Now we also have a test for a flutter application, and we'll want to
have it test the rendering too.
Move the corresponding code to a helper that can be reused by other
tests, rather than duplicate (or reinvent) it.
Switch weston to using that new helper.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Django 5.0.7 fixes the following CVEs:
* CVE-2024-38875: Potential denial-of-service vulnerability in django.utils.html.urlize()
* CVE-2024-39329: Username enumeration through timing difference for users with unusable passwords
* CVE-2024-39330: Potential directory-traversal via Storage.save()
* CVE-2024-39614: Potential denial-of-service vulnerability in get_supported_language_variant()
Django 5.0.8 fixes the following CVEs:
* CVE-2024-41989: Memory exhaustion in django.utils.numberformat.floatformat()
* CVE-2024-41990: Potential denial-of-service vulnerability in django.utils.html.urlize()
* CVE-2024-41991: Potential denial-of-service vulnerability in django.utils.html.urlize() and AdminURLFieldWidget
* CVE-2024-42005: Potential SQL injection in QuerySet.values() and values_list()
Further release Notes: https://docs.djangoproject.com/en/5.0/releases/
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Patch 0001 is upstream, this is also the only change
in this release.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
host-swipl fails to configure with CMake error message:
Could NOT find ZLIB (missing: ZLIB_LIBRARY ZLIB_INCLUDE_DIR)
This commit fixes the issue by adding the missing host-zlib
dependency.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 9696d27756 "package/gpsd: condition python stuff to the proper
kconfig option" changed the condition in which the gpsd python scripts
are installed. After that change, the "gpsfake" command (which is a
python script) is no longer found and the runtime test is failing.
This commit fixes the issue by reflecting the change in the runtime
test Buildroot configuration.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a helper class providing a template for testing audio codec
programs such as lame mp3 encoder, flac tools, ogg vorbis-tools, ...
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
python-configobj package was removed in commit
8d264a9617 because of the missing
support for Python 3.x.
Meanwhile, this problem was fixed, hence readd the package.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds a test case for the recently added swipl package. It
should have been part of commit
69710addd1 ("package/swipl: new
package") but was forgotten.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
SWI-Prolog offers a comprehensive free Prolog environment. Since its
start in 1987, SWI-Prolog development has been driven by the needs of
real world applications. SWI-Prolog is widely used in research and
education as well as commercial applications.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This didn't work out as planned, neither the restriction of muting
unregistered users, nor the exception for matrix users worked as planned.
The channel mode has been reverted to +R (meaning only registered users
are allowed to join) and an exception for *that* has been introduced for
matrix users via +e. The channel modes are documented in [1].
[1] https://www.oftc.net/ChannelModes/
This reverts commit d1e6d7845b.
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
autoconf has an implicit dependency on HOST_XZ due to extracting a
tar.xz archive. By enabling XZ_AUTORECONF we create a reverse dependency
for xz on autoconf. This is fine for target builds, but it won't work
for host builds, as the two packages now depend on each other.
This problem only occurs if host tools are being built by Buildroot. If
the build relies on host tools provided by the distro, there is no
circular dependency problem.
Fixes:
4703a7ae91 package/xz: fix musl static build
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The release notes for version 1.1.0 mention fixes for memory handling
issues and bugs found out by fuzzing, which is the reason why this may
be considered a security update, despite them not having CVEs assigned:
https://github.com/AOMediaCodec/libavif/releases/tag/v1.1.0https://github.com/AOMediaCodec/libavif/releases/tag/v1.1.1
The change checksum for the LICENSE file is caused by a path change for
one of the submodules, and the addition of the licensing terms for the
bundled libyuv sources. The latter are never built from the libavif tree
as there is a separate libyuv package, so BSD-3-Clause does not need to
be added to LIBAVIF_LICENSE.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Removing backported patch and introducing new dependency
setuptools-scm.
As setuptools-scm doesn't work with github release tarballs, also
switching back to download the tarball from pypi...
Signed-off-by: Zoltan Gyarmati <zgyarmati@zgyarmati.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
--prefix influences the default of --sysconfdir, so we need to specify
--sysconfdir=/etc explicitly.
Fixes: 17deaf60f6 ("tipidee: new package")
Signed-off-by: J. Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
After the recent addition to -Wl,-z,text to TARGET_LDFLAGS in case of
musl-libc and dynamic linking, it was found that some packages pass
TARGET_LDFLAGS directly to ld, but the -Wl syntax only works with
compiler drivers (gcc/clang). This commit changes the flag to -z text,
which the gcc and clang also understand and pass to the linker.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: J. Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This new version requires libglib2 as a dependency, which itself is
detected using pkg-config, so we need host-pkgconf as a dependency.
The patch 0001-atop.h-include-time.h.patch can be removed, it was
applied upstream as
https://github.com/Atoptool/atop/commit/03c5c4dd29bc7590baccb55a36d61e7f4b39c1fe.
A new patch (submitted upstream) is also needed to be able to provide
additional CFLAGS/LDFLAGS, without overriding the ones defined in the
upstream Makefile.
Signed-off-by: Kadambini Nema <kadambini.nema@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
`libspdm 3.3.0` and later support the SPDM event capability, however
this patch disables support for EVENT_CAP as it is optional,
and requires additional functionality implemented at link time.
`libspdm 3.4.0` also introduces SPDM1.3 measurement extention log (MEL).
Leave this off by default for the same reason as above.
The license file has changed, for two reasons:
- The copyright years have been updated
- The license was simplified to be really a pure BSD 3 Clause license,
instead of a modified license that had some special patent
disclaimer/clauses. See https://github.com/DMTF/libspdm/issues/2682
for more details. We don't need to change LIBSPDM_LICENSE because it
was already only saying BSD-3-Clause (which was slightly wrong)
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Those defconfigs were recently bumped to NXP BSP lf-6.6.23-2.0.0.
NXP BSP U-Boot version lf-6.6.23-2.0.0 is based on upstream
version 2024.04. This version now requires OpenSSL and GnuTLS for
that configuration.
Those defconfigs are failing in uboot build, with output:
In file included from tools/imagetool.h:24,
from tools/imagetool.c:8:
include/image.h:1471:12: fatal error: openssl/evp.h: No such file or directory
1471 | # include <openssl/evp.h>
| ^~~~~~~~~~~~~~~
and:
tools/mkeficapsule.c:20:10: fatal error: gnutls/gnutls.h: No such file or directory
20 | #include <gnutls/gnutls.h>
| ^~~~~~~~~~~~~~~~~
This commit fixes the issue by adding BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
and BR2_TARGET_UBOOT_NEEDS_OPENSSL=y in those defconfigs.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig was recently bumped to NXP BSP lf-6.6.23-2.0.0.
NXP BSP U-Boot version lf-6.6.23-2.0.0 is based on upstream
version 2024.04. This version now requires OpenSSL.
This defconfig is failing in uboot build, with output:
In file included from tools/imagetool.h:24,
from tools/imagetool.c:8:
include/image.h:1471:12: fatal error: openssl/evp.h: No such file or directory
1471 | # include <openssl/evp.h>
| ^~~~~~~~~~~~~~~
This commit fixes the issue by adding
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y in the defconfig.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Those defconfigs were recently bumped to NXP BSP lf-6.6.23-2.0.0.
NXP BSP U-Boot version lf-6.6.23-2.0.0 is based on upstream
version 2024.04. This version now requires OpenSSL.
Those defconfigs are failing in uboot build, with output:
In file included from tools/imagetool.h:24,
from tools/imagetool.c:8:
include/image.h:1471:12: fatal error: openssl/evp.h: No such file or directory
1471 | # include <openssl/evp.h>
| ^~~~~~~~~~~~~~~
This commit fixes the issue by adding
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y in all the impacted defconfigs.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Those defconfigs were recently bumped to NXP BSP lf-6.6.23-2.0.0.
NXP BSP U-Boot version lf-6.6.23-2.0.0 is based on upstream
version 2024.04. This version now requires OpenSSL.
Those defconfigs are failing in uboot build, with output:
In file included from tools/imagetool.h:24,
from tools/imagetool.c:8:
include/image.h:1471:12: fatal error: openssl/evp.h: No such file or directory
1471 | # include <openssl/evp.h>
| ^~~~~~~~~~~~~~~
This commit fixes the issue by adding
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y in all the impacted defconfigs.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The new procps-ng uses modern top layout by default which doesn't
provide detailed cpu usage info, so let's add an option for nostalgic
users that allows to get the original layout back.
Signed-off-by: Xiang Lin <myd.xia@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Requires GCC 8.3 due to the introduction of the charconv header.
However, as there is no BR2_TOOLCHAIN_GCC_AT_LEAST_8_3, we round up to
BR2_TOOLCHAIN_GCC_AT_LEAST_9.
Note the `COPYING` file has changed due to copyright year bumps.
See also: https://github.com/jtv/libpqxx/blob/master/NEWS
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump ATF, U-Boot and Linux kernel to the NXP BSP lf-6.6.23-2.0.0
versions.
Also, commit c05f27c8ae "configs/freescale_imx93evk: new defconfig"
introduced the custom hash files, but did not add
BR2_DOWNLOAD_FORCE_CHECK_HASHES=y in the defconfig. This commit fixes
this issue by adding this config directive. As a side note, commit
22fd54b737 "configs/freescale_imx93evk: Update to NXP lf-6.6.3-1.0.0"
updated the defconfig components version, but did not updated the
custom hash files, because they were ignored. This is why hashes were
still at version 6.1 whereas components where already at 6.6.
Since hashes were not enabled, this was not detected by
"make check-package", and the entry in ".checkpackageignore" was also
kept. This commit also removes this entry.
Finally, with the bump of BSP components, this commit updates the
custom hash files accordingly.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot and Linux kernel to the NXP BSP lf-6.6.23-2.0.0 versions.
This commit also adds the custom version package hashes. Therefore,
BR2_DOWNLOAD_FORCE_CHECK_HASHES=y is added in the defconfig, a
BR2_GLOBAL_PATCH_DIR is also added in the board specific directory and
the hash files are added. The corresponding ".checkpackageignore"
entry is also removed.
The Kernel DTS name is also updated by adding the new "nxp/imx/"
prefix, to follow the upstream reorganization in [1], first included
in v6.5.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=724ba6751532055db75992fc6ae21c3e322e94a7
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The 6.9.x series is now EOL upstream, so drop the linux-headers option
and add legacy handling for it.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Maeva told me personally she will no longer contribute to Buildroot
for the time being. This commit removes all the associated DEVELOPERS
entries.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps:
- TF-A to version v2.10
- U-Boot to versione v2024.07
- Linux kernel to version 6.10
The TF-A bump required applying a patch, sent upstream, to fix a
regression in the domain access permissions configuration for the boot
console UART.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some scenarii, like building an RTK base, does not require a gpsd
daemon, but just a few python based tools (e.g. the python scripts
to configure a GNSS device).
Add an option to enable or disable building and instaling the daemon.
We make it enabled by default, for legacy purposes.
When the daemon is installed, it also installs a few ancillary helpers,
which need some of the clients (e.g. the udev rule will use gpsdctl), so
ensure they are enabled with the daemon.
Speaking of the udev rule: without the daemon, it does not need to be
installed, so only try to fix its mode when the daemomn is installed.
Similarly for systemd, no need to install the drop-in when the daemon is
not installed. And for sysv init, no need for a startup script without
the daemon either.
Now that everything is optional, daemon, clients, and python stuff, we
need to ensure that at least something is installed. The obvious
solution would be to ensure that the daemon is installed, but that
causes conflicts in the Kconfig depencies (elided for readability):
config BR2_PACAKGE_GPSD
bool "gpsd:
select BR2_PACKAGE_GPSD_DAEMON if ! BR2_PACKAGE_GPSD_CLIENTS \
&& ! BR2_PACKAGE_GPSD_PYTHON
config BR2_PACKAGE_GPSD_DAEMON
bool "daemon"
select BR2_PACKAGE_GPSD_CLIENTS
would cause errors like:
package/gpsd/Config.in:27:error: recursive dependency detected!
package/gpsd/Config.in:27: symbol BR2_PACKAGE_GPSD_DAEMON is selected by BR2_PACKAGE_GPSD_CLIENTS
package/gpsd/Config.in:226: symbol BR2_PACKAGE_GPSD_CLIENTS is selected by BR2_PACKAGE_GPSD_DAEMON
So we chose the next best option: ensure that the clients get built, if
nothing else does.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Bernd Kuhls <bernd@kuhls.net>
Reviewed-by: Jan Havran <havran.jan@email.cz>
Tested-by: Jan Havran <havran.jan@email.cz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In some cases, the clients are useless on the target, e.g. when there is
no need to adjust the gpsd daemon at runtime.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It's in the middle of options that are specific to the daemon, while
it itself is not specific to the daemon. We're going to add an option
to enable/disable the daemon soon, so that python option would get
hidden away.
Move it further down, out of scope of the daemon-related options.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, we have a Kconfig symbol to enable the python support in
gpsd, but the condition at configure time is based on whether the python
package is enabled. So, if a user does not enable python support in
gpsd, they still get it.
Switch to using the proper symbol.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Bernd Kuhls <bernd@kuhls.net>
Reviewed-by: Jan Havran <havran.jan@email.cz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Pass USE_LIBDRM=OFF to the wpewebkit CMake configuration step when the
libdrm package has not been selected.
WPE WebKit can be built without libdrm support, and it will still work
with backends that use other platform-specific methods to handle
graphics buffers and/or presenting content onto an output. For example
this is the case with wpebackend-rdk configured to use rpi-userland,
which uses dispmanx to produce the output instead of DRM/KMS.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
OP-TEE OS supports custom tarballs. If the OP-TEE OS custom tarball version
does not match the latest optee-examples version supported by Buildroot,
optee-examples might not build or run properly. This patch adds support for
an optee-examples custom tarball URL to address this potential issue.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Acked-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
OP-TEE OS supports custom tarballs. If the OP-TEE OS custom tarball version
does not match the latest optee-test version supported by Buildroot,
optee-test might not build or run properly. This patch adds support for
an optee-test custom tarball URL to address this potential issue.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Acked-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
OP-TEE OS supports custom tarballs. If the OP-TEE OS custom tarball
version does not match the latest optee-client version supported by
Buildroot, optee-client might not build or run properly. This patch
adds support for an optee-client custom tarball URL to address this
potential issue.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Acked-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Runnning autoreconf is needed to avoid the following static build
failure on musl which is raised as otherwise LDFLAGS (which contains
-static) is not passed:
/home/autobuild/autobuild/instance-16/output-1/host/lib/gcc/armeb-buildroot-linux-musleabi/13.3.0/../../../../armeb-buildroot-linux-musleabi/bin/ld: /home/autobuild/autobuild/instance-16/output-1/host/lib/gcc/armeb-buildroot-linux-musleabi/13.3.0/libgcc.a(_dvmd_lnx.o): in function `__aeabi_idiv0':
/home/autobuild/autobuild/instance-16/output-1/build/host-gcc-final-13.3.0/build/armeb-buildroot-linux-musleabi/libgcc/../../../libgcc/config/arm/lib1funcs.S:1499:(.text+0x8): undefined reference to `raise'
This build failure is raised by autobuilders since bump to version 5.6.2
in commit d1d77eb274 but it can also be
reproduced on version 5.4.7 (but not on 5.4.6). There is probably an
issue with these two official autotools tarballs which have been
released the same day (on May 29 2024).
Fixes: 40240ac30ahttp://autobuild.buildroot.org/results/344813b202644a23c166920aa7e861ebf408536b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update wpa_supplicant to the latest release v2.11. Drop all the patches
as they are already included into the release.
Hash of the README file used as license file has changed due to:
-Copyright (c) 2002-2022, Jouni Malinen <j@w1.fi> and contributors
+Copyright (c) 2002-2024, Jouni Malinen <j@w1.fi> and contributors
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With GCC 14.x as the host compiler, bcusdk fails to build as follows:
configure: error: Specified CC_FOR_BUILD doesn't seem to work
This is due to missing includes in the test programs used in the
configure script to check the host compiler. We fix this with patch
0003.
However, this patch requires to autoreconf the package, and autoreconf
would need the definition of AM_PATH_XML2, which would require libxml2
even though we don't have libxml2 as a dependency of this package (we
don't enable the features that requires libxml2). As it turns out that
the AM_PATH_XML2 macro is in fact deprecated, we replaced it by its
equivalent using PKG_CHECK_MODULES(), which is in fact exactly how
AM_PATH_XML2 is implemented in upstream libxml2.
Fixes:
http://autobuild.buildroot.net/results/458880bd6c207e5bb7afce1a1186f204c30c0941/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch 0001 has been submitted upstream, but the formatting of the
tag was not correct, let's fix this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure without threads raised since switch to
meson-package in commit 1fa58814c0 which
wrongly removed -DCAIRO_NO_MUTEX=1:
In file included from ../src/cairo-mutex-type-private.h:45,
from ../src/cairo-scaled-font-private.h:45,
from ../src/cairoint.h:415,
from ../src/cairo-arc.c:37:
../src/cairo-mutex-impl-private.h:231:3: error: #error "XXX: No mutex implementation found. Cairo will not work with multiple threads. Define CAIRO_NO_MUTEX to 1 to acknowledge and accept this limitation and compile cairo without thread-safety support."
231 | # error "XXX: No mutex implementation found. Cairo will not work with multiple threads. Define CAIRO_NO_MUTEX to 1 to acknowledge and accept this limitation and compile cairo without thread-safety support."
| ^~~~~
Note that prior to 1fa58814c0, the
condition was:
ifeq ($(BR2_TOOLCHAIN_HAS_THREADS_NPTL),)
CAIRO_CONF_ENV += CPPFLAGS="$(TARGET_CPPFLAGS) -DCAIRO_NO_MUTEX=1"
endif
but that was in fact wrong, because it meant that toolchain with
linuxthreads (not NPTL) would have thread support, but a thread-unsafe
cairo library. The condition was changed from
BR2_TOOLCHAIN_HAS_THREADS to BR2_TOOLCHAIN_HAS_THREADS_NPTL in an
older commit, 92f14307ba, but now
cairo's mutex support builds fine with linuxthreads, so we can use
CAIRO_NO_MUTEX=1 only when thread support is not available at all.
Fixes: 1fa58814c0
- http://autobuild.buildroot.org/results/a123355b6d315d2fcda646d3f1c7b588cba78258
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
mdio-tools depends on CONFIG_MDIO_DEVICE in order for mdiobus driver to
be built, but CONFIG_MDIO_DEVICE depends on CONFIG_NETDEVICES which we
are not enabling so on platforms without it enabled in kernel config
building mdio-tools will fail with:
ERROR: modpost: "mdio_find_bus" [output-1/build/mdio-tools-1.3.1/kernel/mdio-netlink.ko] undefined!
ERROR: modpost: "__mdiobus_c45_read" [output-1/build/mdio-tools-1.3.1/kernel/mdio-netlink.ko] undefined!
ERROR: modpost: "__mdiobus_read" [output-1/build/mdio-tools-1.3.1/kernel/mdio-netlink.ko] undefined!
ERROR: modpost: "__mdiobus_c45_write" [output-1/build/mdio-tools-1.3.1/kernel/mdio-netlink.ko] undefined!
ERROR: modpost: "__mdiobus_write" [output-1/build/mdio-tools-1.3.1/kernel/mdio-netlink.ko] undefined!
So enable CONFIG_NETDEVICES as well to make sure CONFIG_MDIO_DEVICE can be enabled.
Fixes: http://autobuild.buildroot.net/results/edf47df96cde6094c890c0b74034cced90335a39/
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
All patches of the odb package already contained relevant Upstream
information, just not formatted according to how we expect it. Let's
fix that, and drop the .checkpackageignore entries that are no longer
needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump ATF, U-Boot and Linux kernel to the NXP BSP lf-6.6.23-2.0.0
versions.
Also, since commit dc0f721 "package/gcc: switch to 13.x as default",
this freescale_imx8mqevk_defconfig is failing to build the Kernel
with output:
drivers/mxc/gpu-viv/hal/os/linux/kernel/gc_hal_kernel_os.c:5769:1: error: conflicting types for '_QuerySignal' due to enum/integer mismatch; have 'gceSTATUS(struct _gckOS *, void *)' {aka 'enum _gceSTATUS(struct _gckOS *, void *)'} [-Werror=enum-int-mismatch]
5769 | _QuerySignal(
| ^~~~~~~~~~~~
This commit fixes the issue by updating the Kernel.
The BR2_GLOBAL_PATCH_DIR is also changed from
"board/freescale/common/patches" to
"board/freescale/imx8mqevk/patches". This for two reasons:
1. the common patch directory is removed, because the patches for
arm-trusted-firmware are no longer needed. Patch 0001 is included
in this new version, and patch 0002 no longer needed due a code
rewrite in this new version. The common patch files are kept,
because they are used in other freescale_ defconfigs.
2. the imx8mqevk patch directory is introduced, to include the needed
hash files, because this commit enables
BR2_DOWNLOAD_FORCE_CHECK_HASHES=y. Those hash files are introduced
in a board specific directory to allow updating this defconfig
independently of the other i.MX defconfigs: there is 16
freescale_imx*_defconfigs, with more or less dependencies
(firmwares, gpu drivers, ...). The ".checkpackageignore" entry for
this defconfig is also removed.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7422089470
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Upstream now provides sha256sum for tarball. License hash updated
because of copyright year and maintainer surname changes.
Changes from https://github.com/troglobit/netcalc/releases/tag/v2.1.7:
- Allow colorized output over pipes, use -n to disable.
This reverts the auto-disable in pipes, introduced in v2.1
- Misc. build issues on macOS and *BSD
- Various minor GCC 13 and Clang 18 warnings
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Wraps up firmware 16.2 and 16.3
Changelog from https://github.com/linux4wilc/firmware/releases:
- Fixed the transmission issue for the large data blocks
- Unified driver codebase for the ATWILC & nextGen products.
- Fix for Powersave state issue when network interface is down
(using 'ifconfig wlan0 down') and 'up' again.
- Migrated the ATWILC driver codebase to Kernel 6.6
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump ATF, U-Boot and Linux kernel to the NXP BSP lf-6.6.23-2.0.0
versions.
Also, since commit dc0f721 "package/gcc: switch to 13.x as default",
this freescale_imx8mmevk_defconfig is failing to build the Kernel
with output:
drivers/mxc/gpu-viv/hal/os/linux/kernel/gc_hal_kernel_os.c:5769:1: error: conflicting types for '_QuerySignal' due to enum/integer mismatch; have 'gceSTATUS(struct _gckOS *, void *)' {aka 'enum _gceSTATUS(struct _gckOS *, void *)'} [-Werror=enum-int-mismatch]
5769 | _QuerySignal(
| ^~~~~~~~~~~~
This commit fixes the issue by updating the Kernel.
The BR2_GLOBAL_PATCH_DIR is also changed from
"board/freescale/common/patches" to
"board/freescale/imx8mmevk/patches". This for two reasons:
1. the common patch directory is removed, because the patches for
arm-trusted-firmware are no longer needed. Patch 0001 is included
in this new version, and patch 0002 no longer needed due a code
rewrite in this new version. The common patch files are kept,
because they are used in other freescale_ defconfigs.
2. the imx8mmevk patch directory is introduced, to include the needed
hash files, because this commit enables
BR2_DOWNLOAD_FORCE_CHECK_HASHES=y. Those hash files are introduced
in a board specific directory to allow updating this defconfig
independently of the other i.MX defconfigs: there is 16
freescale_imx*_defconfigs, with more or less dependencies
(firmwares, gpu drivers, ...). The ".checkpackageignore" entry for
this defconfig is also removed.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7422089464
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While switching from a custom to mainline kernel in commit
b7dbdd3d77, the uboot tools became
unneeded and were removed from the rock5b_defconfig. However, the FIT
support configuration parameter was accidentally left inside the
defconfig. This patch removes it.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump ATF, U-Boot and Linux kernel to the NXP BSP lf-6.6.23-2.0.0
versions.
Also, since commit dc0f721 "package/gcc: switch to 13.x as default",
this freescale_imx8dxlevk_defconfig is failing to build the Kernel
with output:
drivers/mxc/gpu-viv/hal/os/linux/kernel/gc_hal_kernel_os.c:5675:1: error: conflicting types for '_QuerySignal' due to enum/integer mismatch; have 'gceSTATUS(struct _gckOS *, void *)' {aka 'enum _gceSTATUS(struct _gckOS *, void *)'} [-Werror=enum-int-mismatch]
5675 | _QuerySignal(IN gckOS Os, IN gctSIGNAL Signal)
| ^~~~~~~~~~~~
This commit fixes the issue by updating the Kernel.
This commit also adds the custom version package hashes. Therefore,
BR2_DOWNLOAD_FORCE_CHECK_HASHES=y is added in the defconfig, a
BR2_GLOBAL_PATCH_DIR is also added in the board specific directory and
the hash files are added.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7422089463
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump ATF, U-Boot and Linux kernel to the NXP BSP lf-6.6.23-2.0.0
versions.
Also, since commit dc0f721 "package/gcc: switch to 13.x as default",
this freescale_imx8qxpmek_defconfig is failing to build the Kernel
with output:
drivers/mxc/gpu-viv/hal/os/linux/kernel/gc_hal_kernel_os.c:5769:1: error: conflicting types for '_QuerySignal' due to enum/integer mismatch; have 'gceSTATUS(struct _gckOS *, void *)' {aka 'enum _gceSTATUS(struct _gckOS *, void *)'} [-Werror=enum-int-mismatch]
5769 | _QuerySignal(
| ^~~~~~~~~~~~
This commit fixes the issue by updating the Kernel.
The BR2_GLOBAL_PATCH_DIR is also changed from
"board/freescale/common/patches" to
"board/freescale/imx8qxpmek/patches". This for two reasons:
1. the common patch directory is removed, because the patches for
arm-trusted-firmware are no longer needed. Patch 0001 is included
in this new version, and patch 0002 no longer needed due a code
rewrite in this new version. The common patch files are kept,
because they are used in other freescale_ defconfigs.
2. the imx8qxpmek patch directory is introduced, to include the needed
hash files, because this commit enables
BR2_DOWNLOAD_FORCE_CHECK_HASHES=y. Those hash files are introduced
in a board specific directory to allow updating this defconfig
independently of the other i.MX defconfigs: there is 16
freescale_imx*_defconfigs, with more or less dependencies
(firmwares, gpu drivers, ...). The ".checkpackageignore" entry for
this defconfig is also removed.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7422089475
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump ATF, U-Boot and Linux kernel to the NXP BSP lf-6.6.23-2.0.0
versions.
Also, since commit dc0f721 "package/gcc: switch to 13.x as default",
this freescale_imx8qmmek_defconfig is failing to build the Kernel
with output:
drivers/mxc/gpu-viv/hal/os/linux/kernel/gc_hal_kernel_os.c:5769:1: error: conflicting types for '_QuerySignal' due to enum/integer mismatch; have 'gceSTATUS(struct _gckOS *, void *)' {aka 'enum _gceSTATUS(struct _gckOS *, void *)'} [-Werror=enum-int-mismatch]
5769 | _QuerySignal(
| ^~~~~~~~~~~~
This commit fixes the issue by updating the Kernel.
The BR2_GLOBAL_PATCH_DIR is also changed from
"board/freescale/common/patches" to
"board/freescale/imx8qmmek/patches". This for two reasons:
1. the common patch directory is removed, because the patches for
arm-trusted-firmware are no longer needed. Patch 0001 is included
in this new version, and patch 0002 no longer needed due a code
rewrite in this new version. The common patch files are kept,
because they are used in other freescale_ defconfigs.
2. the imx8qmmek patch directory is introduced, to include the needed
hash files, because this commit enables
BR2_DOWNLOAD_FORCE_CHECK_HASHES=y. Those hash files are introduced
in a board specific directory to allow updating this defconfig
independently of the other i.MX defconfigs: there is 16
freescale_imx*_defconfigs, with more or less dependencies
(firmwares, gpu drivers, ...). The ".checkpackageignore" entry for
this defconfig is also removed.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7422089474
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This version is aligned with NXP Linux BSP version "lf-6.6.23-2.0.0".
License hashes changed because the LA_OPT_NXP_Software_License changed
from "v48 July 2023" to "v56 April 2024".
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This version is aligned with NXP Linux BSP version "lf-6.6.23-2.0.0".
License hashes changed because the LA_OPT_NXP_Software_License changed
from "v39 August 2022" to "v56 April 2024".
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds more information to the Udoo Neo's readme, e.g., UART
pins and baudrate.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump ATF, U-Boot and Linux kernel to the NXP BSP lf-6.6.23-2.0.0
versions.
Also, since commit dc0f721 "package/gcc: switch to 13.x as default",
this freescale_imx8mnevk_defconfig is failing to build the Kernel
with output:
drivers/mxc/gpu-viv/hal/os/linux/kernel/gc_hal_kernel_os.c:5769:1: error: conflicting types for '_QuerySignal' due to enum/integer mismatch; have 'gceSTATUS(struct _gckOS *, void *)' {aka 'enum _gceSTATUS(struct _gckOS *, void *)'} [-Werror=enum-int-mismatch]
5769 | _QuerySignal(
| ^~~~~~~~~~~~
This commit fixes the issue by updating the Kernel.
The BR2_GLOBAL_PATCH_DIR is also changed from
"board/freescale/common/patches" to
"board/freescale/imx8mnevk/patches". This for two reasons:
1. the common patch directory is removed, because the patches for
arm-trusted-firmware are no longer needed. Patch 0001 is included
in this new version, and patch 0002 no longer needed due a code
rewrite in this new version. The common patch files are kept,
because they are used in other freescale_ defconfigs.
2. the imx8mnevk patch directory is introduced, to include the needed
hash files, because this commit enables
BR2_DOWNLOAD_FORCE_CHECK_HASHES=y. Those hash files are introduced
in a board specific directory to allow updating this defconfig
independently of the other i.MX defconfigs: there is 16
freescale_imx*_defconfigs, with more or less dependencies
(firmwares, gpu drivers, ...). The ".checkpackageignore" entry for
this defconfig is also removed.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7422089467
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump ATF, U-Boot and Linux kernel to the NXP BSP lf-6.6.23-2.0.0
versions.
Also, since commit dc0f721 "package/gcc: switch to 13.x as default",
this freescale_imx8mpevk_defconfig is failing to build the Kernel
with output:
drivers/mxc/gpu-viv/hal/os/linux/kernel/gc_hal_kernel_os.c:5675:1: error: conflicting types for '_QuerySignal' due to enum/integer mismatch; have 'gceSTATUS(struct _gckOS *, void *)' {aka 'enum _gceSTATUS(struct _gckOS *, void *)'} [-Werror=enum-int-mismatch]
5675 | _QuerySignal(IN gckOS Os, IN gctSIGNAL Signal)
| ^~~~~~~~~~~~
This commit fixes the issue by updating the Kernel.
This commit also adds the custom version package hashes. Therefore,
BR2_DOWNLOAD_FORCE_CHECK_HASHES=y is added in the defconfig, a
BR2_GLOBAL_PATCH_DIR is also added in the board specific directory and
the hash files are added.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7422089468
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add hashes for uboot and linux, and enable
BR2_DOWNLOAD_FORCE_CHECK_HASHES.
Modify .checkpackageignore to enable the hash check for the Udoo Neo
config.
Signed-off-by: Philip-Dylan Gleonec <philip-dylan@gleonec.bzh>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The current 5.15.13 kernel fails to build:
In file included from <command-line>:
drivers/ata/libahci.c: In function 'ahci_led_store':
././include/linux/compiler_types.h:322:45: error: call to '__compiletime_assert_329' declared with attribute error: BUILD_BUG_ON failed: sizeof(_s) > sizeof(long)
This commit fixes this by using the opportunity to bump the kernel to
the latest LTS version. While bumping the kernel, the headers to use
are also updated, and the selected device trees are updated to use the
new dts per vendor organization.
This update does not introduce any new error or warning with the
current configuration.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7477108980
Signed-off-by: Philip-Dylan Gleonec <philip-dylan@gleonec.bzh>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Backport some patches fixing the python shebang and allowing one
to disable the use of genpeimg since we use host-python-pefile.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This will be required for the upcoming python-uswid package.
Disable c extensions for host package to speed up build.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch adds .hash files for Linux, Linux headers and U-Boot and then
enables BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we can now drop the
defconfig from .checkpackageignore.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Compared to the beaglebone_defconfig, updating the Linux kernel for
beaglebone_qt5 is more tricky because it may also involve updating the
ti-sgx-{km,um} packages. Therefore, it is unlikely that the two
configurations can share the same software versions for the Linux
kernel, and consequently a single path for the patches. For this
reason, and with the foresight of adding the hash files for the
beaglebone_defconfig as well, the hash files and patches are moved to
a separate board/beagleboard/beaglebone-qt5/patches/ directory. This
way, future conflicts in managing the patches for the two
configurations (i.e., beaglebone[_qt5]_defconfig) are avoided.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit e2520d0ff3d8e ("configs/beaglebone_qt5: bump kernel and U-Boot,
add weston") selected host-uboot-tools with FIT support to create the
images. They are no longer necessary now.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
On the architectures that supports libsanitizer (part of gcc), the
build is currently failing with BR2_TIME_BITS_64=y. This is because
some code in libsanitizer unsets _FILE_OFFSET_BITS, but building code
with _FILE_OFFSET_BITS unset, but _TIME_BITS set isn't legal.
To fix this, this commit backports two changes:
- One change to also unset _TIME_BITS in
sanitizer_platform_limits_posix.cpp. This change is upstream in
LLVM, and already part of GCC 14.x, so we only bringing it to GCC
12.x and GCC 13.x.
- A second change doing the same modification, but in
sanitizer_procmaps_solaris.cpp, which as crazy as it might sound,
also gets compiled on Linux platforms (but to basically an empty
file). This change has been submitted upstream to both LLVM and gcc.
Notes:
- the special PowerPC SPE version of GCC cannot be affected, as only
uClibc-ng is used for this architecture, and uClibc-ng doesn't use
_TIME_BITS=64 (but now default to 64-bit time_t on 32-bit
architectures, like musl does).
- the special ARC version doesn't need patching because libsanitizer
doesn't support the ARC architecture, so it doesn't get built
Fixes:
http://autobuild.buildroot.net/results/ff2dbfdabf0bb6a0d82ea8a80122ab97fd75bd3f/https://gitlab.com/buildroot.org/buildroot/-/issues/16
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
According to the GCC 14.x release notes at
https://gcc.gnu.org/gcc-14/changes.html:
Xeon Phi CPUs support (a.k.a. Knight Landing and Knight Mill) are
marked as deprecated. GCC will emit a warning when using the
-mavx5124fmaps, -mavx5124vnniw, -mavx512er, -mavx512pf,
-mprefetchwt1, -march=knl, -march=knm, -mtune=knl or -mtune=knm
compiler switches. Support will be removed in GCC 15.
Using those architectures already emits warnings, which when treated
as errors cause build failures, such as:
cc1: error: '-march=knm' support will be removed in GCC 15 [-Werror=deprecated]
cc1: all warnings being treated as errors
Therefore, let's drop support for those two architectures, which are
anyway not common at all, especially in the embedded space.
Fixes:
http://autobuild.buildroot.net/results/ce98c41b22212f52bf7b53d84871b8e03409dbca/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following static build failure raised since the addition of the
package in commit 70319b47f6:
FAILED: src/libdex-1.so.1.0.0
/home/autobuild/autobuild/instance-11/output-1/host/bin/mips-buildroot-linux-musl-gcc -o src/libdex-1.so.1.0.0 -Wl,--as-needed -Wl,--no-undefined -Wl,-O1 -shared -fPIC -Wl,--start-group -Wl,-soname,libdex-1.so.1 -Wl,--whole-archive src/libdex-1.a -Wl,--no-whole-archive -Wl,-z,relro -Wl,-z,now -Wl,-z,noexecstack -Wl,-Bsymbolic -fno-plt -static -lucontext -latomic /home/autobuild/autobuild/instance-11/output-1/host/mips-buildroot-linux-musl/sysroot/usr/lib/libgio-2.0.a /home/autobuild/autobuild/instance-11/output-1/host/mips-buildroot-linux-musl/sysroot/usr/lib/libgobject-2.0.a /home/autobuild/autobuild/instance-11/output-1/host/mips-buildroot-linux-musl/sysroot/usr/lib/libffi.a /home/autobuild/autobuild/instance-11/output-1/host/mips-buildroot-linux-musl/sysroot/usr/lib/libgmodule-2.0.a /home/autobuild/autobuild/instance-11/output-1/host/mips-buildroot-linux-musl/sysroot/usr/lib/libglib-2.0.a /home/autobuild/autobuild/instance-11/output-1/host/lib/gcc/mips-buildroot-linux-musl/13.3.
0/../../../../mips-buildroot-linux-musl/lib/libatomic.a -lm -pthread /home/autobuild/autobuild/instance-11/output-1/host/mips-buildroot-linux-musl/sysroot/usr/lib/libpcre2-8.a /home/autobuild/autobuild/instance-11/output-1/host/mips-buildroot-linux-musl/sysroot/usr/lib/libz.a -latomic -Wl,--end-group
/home/autobuild/autobuild/instance-11/output-1/host/lib/gcc/mips-buildroot-linux-musl/13.3.0/crtbeginT.o: in function `deregister_tm_clones':
crtstuff.c:(.text+0x10): relocation R_MIPS_HI16 against `__gnu_local_gp' cannot be used when making a shared object; recompile with -fPIC
Fixes: 70319b47f6
- http://autobuild.buildroot.org/results/f527cab99141ecbbbd13c12177a2cc8903bed3a4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add -D_GNU_SOURCE to CFLAGS as liburing.h doesn't define it anymore
since bump of liburing to version 2.6 in commit
da45ae3304 and
https://github.com/axboe/liburing/commit/c427ed678f39fd144d784f2e970bd8c52f425e14
resulting in the following musl build failure since the addition of
libdex in commit 70319b47f6:
In file included from ../src/dex-uring-aio-backend.c:29:
/home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-musl/sysroot/usr/include/liburing.h:224:39: error: unknown type name 'cpu_set_t'
224 | const cpu_set_t *mask);
| ^~~~~~~~~
/home/autobuild/autobuild/instance-7/output-1/host/mips-buildroot-linux-musl/sysroot/usr/include/liburing.h:1212:48: error: unknown type name 'loff_t'; did you mean 'off_t'?
1212 | int fd, loff_t len)
| ^~~~~~
| off_t
Fixes: 70319b47f6
- http://autobuild.buildroot.org/results/276646bf224d5927cf0311cf978571a7f8774116
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Following Microchip's Linux 2024.06 release, bump Linux and U-Boot to
the most recent versions. Also update the Linux custom headers to
support the new v6.6 kernel. Update all affected hashes.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Following Microchip's Linux 2024.06 release, update the assets to the
latest versions, this includes a Linux and U-boot version bump. Update
the Linux headers to support the updated v6.6 kernel.
This defconfig was added before the "BR2_DOWNLOAD_FORCE_CHECK_HASHES"
option was mandatory. Add this and the corresponding package hashes.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Build-tested using these defconfigs
BR2_PACKAGE_OPENSSL=y
BR2_PACKAGE_LIBOPENSSL=y
BR2_PACKAGE_OPENCONNECT=y
arm-aarch64 [ 1/41]: OK
bootlin-aarch64-glibc [ 2/41]: OK
bootlin-arcle-hs38-uclibc [ 3/41]: OK
bootlin-armv5-uclibc [ 4/41]: OK
bootlin-armv7-glibc [ 5/41]: OK
bootlin-armv7m-uclibc [ 6/41]: SKIPPED
bootlin-armv7-musl [ 7/41]: OK
bootlin-m68k-5208-uclibc [ 8/41]: SKIPPED
bootlin-m68k-68040-uclibc [ 9/41]: OK
bootlin-microblazeel-uclibc [10/41]: OK
bootlin-mipsel32r6-glibc [11/41]: OK
bootlin-mipsel-uclibc [12/41]: OK
bootlin-nios2-glibc [13/41]: OK
bootlin-openrisc-uclibc [14/41]: OK
bootlin-powerpc64le-power8-glibc [15/41]: OK
bootlin-powerpc-e500mc-uclibc [16/41]: OK
bootlin-riscv32-glibc [17/41]: OK
bootlin-riscv64-glibc [18/41]: OK
bootlin-riscv64-musl [19/41]: OK
bootlin-s390x-z13-glibc [20/41]: OK
bootlin-sh4-uclibc [21/41]: OK
bootlin-sparc64-glibc [22/41]: OK
bootlin-sparc-uclibc [23/41]: OK
bootlin-x86-64-glibc [24/41]: OK
bootlin-x86-64-musl [25/41]: OK
bootlin-x86-64-uclibc [26/41]: OK
bootlin-x86-i686-musl [27/41]: OK
bootlin-xtensa-uclibc [28/41]: OK
br-arm-basic [29/41]: OK
br-arm-full-nothread [30/41]: OK
br-arm-full-static [31/41]: OK
br-i386-pentium4-full [32/41]: OK
br-mips64-n64-full [33/41]: OK
br-mips64r6-el-hf-glibc [34/41]: OK
br-powerpc-603e-basic-cpp [35/41]: OK
br-powerpc64-power7-glibc [36/41]: OK
linaro-aarch64-be [37/41]: OK
linaro-aarch64 [38/41]: OK
linaro-arm [39/41]: OK
sourcery-mips64 [40/41]: OK
sourcery-mips [41/41]: OK
41 builds, 2 skipped, 0 build failed, 0 legal-info failed, 0 show-info failed
BR2_PACKAGE_GNUTLS=y
BR2_PACKAGE_OPENCONNECT=y
arm-aarch64 [ 1/41]: OK
bootlin-aarch64-glibc [ 2/41]: OK
bootlin-arcle-hs38-uclibc [ 3/41]: OK
bootlin-armv5-uclibc [ 4/41]: OK
bootlin-armv7-glibc [ 5/41]: OK
bootlin-armv7m-uclibc [ 6/41]: SKIPPED
bootlin-armv7-musl [ 7/41]: OK
bootlin-m68k-5208-uclibc [ 8/41]: SKIPPED
bootlin-m68k-68040-uclibc [ 9/41]: OK
bootlin-microblazeel-uclibc [10/41]: OK
bootlin-mipsel32r6-glibc [11/41]: OK
bootlin-mipsel-uclibc [12/41]: OK
bootlin-nios2-glibc [13/41]: OK
bootlin-openrisc-uclibc [14/41]: OK
bootlin-powerpc64le-power8-glibc [15/41]: OK
bootlin-powerpc-e500mc-uclibc [16/41]: OK
bootlin-riscv32-glibc [17/41]: OK
bootlin-riscv64-glibc [18/41]: OK
bootlin-riscv64-musl [19/41]: OK
bootlin-s390x-z13-glibc [20/41]: OK
bootlin-sh4-uclibc [21/41]: OK
bootlin-sparc64-glibc [22/41]: OK
bootlin-sparc-uclibc [23/41]: OK
bootlin-x86-64-glibc [24/41]: OK
bootlin-x86-64-musl [25/41]: OK
bootlin-x86-64-uclibc [26/41]: OK
bootlin-x86-i686-musl [27/41]: OK
bootlin-xtensa-uclibc [28/41]: OK
br-arm-basic [29/41]: SKIPPED
br-arm-full-nothread [30/41]: OK
br-arm-full-static [31/41]: SKIPPED
br-i386-pentium4-full [32/41]: OK
br-mips64-n64-full [33/41]: OK
br-mips64r6-el-hf-glibc [34/41]: OK
br-powerpc-603e-basic-cpp [35/41]: SKIPPED
br-powerpc64-power7-glibc [36/41]: OK
linaro-aarch64-be [37/41]: OK
linaro-aarch64 [38/41]: OK
linaro-arm [39/41]: OK
sourcery-mips64 [40/41]: OK
sourcery-mips [41/41]: OK
41 builds, 5 skipped, 0 build failed, 0 legal-info failed, 0 show-info failed
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit bumps U-Boot and Linux kernel to the NXP BSP
lf-6.6.23-2.0.0 versions.
While bumping those BSP components, this commit also adds the custom
hashes by enabling BR2_DOWNLOAD_FORCE_CHECK_HASHES=y in this
defconfig. A _PATCH_DIR is added for that purpose and hash files are
added in it. The ".checkpackageignore" entry for this defconfig is
also removed.
Also, since commit dc0f721 "package/gcc: switch to 13.x as default",
this freescale_imx7dsabresd_defconfig is failing to build the Kernel
with output:
drivers/ata/libahci.c: In function 'ahci_led_store':
././include/linux/compiler_types.h:315:45: error: call to '__compiletime_assert_340' declared with attribute error: BUILD_BUG_ON failed: sizeof(_s) > sizeof(long)
315 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^
This commit fixes the issue by bumping components which includes the
needed gcc-13 fixes.
The Kernel DTS name is also updated by adding the new "nxp/imx/"
prefix, to follow the upstream reorganization in [1], first included
in v6.5.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7423016459
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=724ba6751532055db75992fc6ae21c3e322e94a7
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Note: configs/freescale_imx6{dl,q,sx}* corresponds to the five:
freescale_imx6dlsabreauto_defconfig
freescale_imx6dlsabresd_defconfig
freescale_imx6qsabreauto_defconfig
freescale_imx6qsabresd_defconfig
freescale_imx6sxsabresd_defconfig
Those i.MX6 Sabre defconfigs have a lot in common. This is why they are
all updated at once in this single commit.
This commit bumps U-Boot and Linux kernel to the NXP BSP
lf-6.6.23-2.0.0 versions. The imx6sabre uboot patch is also rebased on
the new version, and the "Upstream:" tag is added to flag this patch
as Buildroot-specific. The ".checkpackageignore" entry for this patch
is also removed.
While bumping those BSP components, this commit also adds the custom
hashes by enabling BR2_DOWNLOAD_FORCE_CHECK_HASHES=y in those
defconfigs. Hash files are added in the _PATCH_DIR. The
".checkpackageignore" entries for those defconfigs are also removed.
Also, since commit dc0f721 "package/gcc: switch to 13.x as default",
those freescale_imx6{dl,q,sx}* are failing to build the Kernel
with output:
drivers/ata/libahci.c: In function 'ahci_led_store':
././include/linux/compiler_types.h:315:45: error: call to '__compiletime_assert_340' declared with attribute error: BUILD_BUG_ON failed: sizeof(_s) > sizeof(long)
315 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^
This commit fixes the issue by bumping components which includes the
needed gcc-13 fixes.
The Kernel DTS names are also updated by adding the new "nxp/imx/"
prefix, to follow the upstream reorganization in [1], first included
in v6.5.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7422089449https://gitlab.com/buildroot.org/buildroot/-/jobs/7422089451https://gitlab.com/buildroot.org/buildroot/-/jobs/7422089452https://gitlab.com/buildroot.org/buildroot/-/jobs/7422089455https://gitlab.com/buildroot.org/buildroot/-/jobs/7422089456
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=724ba6751532055db75992fc6ae21c3e322e94a7
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The kconfig infra defines a 'PKG_KCONFIG_MAKE' var that wraps all the
standard kconfig options. Switch to this so we aren't duplicating the
logic.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The 'linux-diff-config' target fails with the below error when
PER_PACKAGE_DIRECTORIES is enabled and the 'host-finalize' target hasn't
run yet.
scripts/Kconfig.include:39: C compiler '.../buildroot/output/host/bin/arm-buildroot-linux-gnueabihf-gcc' not found
The 'PPD' variable isn't defined for this target, so 'BR_PATH' falls
back to the final host directory.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The 'linux-savedefconfig' target fails with the below error when
PER_PACKAGE_DIRECTORIES is enabled and the 'host-finalize' target hasn't
run yet.
scripts/Kconfig.include:39: C compiler '.../buildroot/output/host/bin/arm-buildroot-linux-gnueabihf-gcc' not found
The 'PPD' variable isn't defined for this target, so 'BR_PATH' falls
back to the final host directory.
Reported-by: Nathaniel Roach <nroach44@gmail.com>
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This firmware is required for the rsi9116 wifi and bluetooth module
which is driven by the rsi_91x kernel driver.
Signed-off-by: Boerge Struempfel <boerge.struempfel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When creating a hardware platform for AMD Versal devices with the AMD Vivado
Design Suite, the resulting XSA file has a file named "psm_fw.elf" included.
This does not match the "psmfw.elf" filename that users will get when building
the boot firmware from the Xilinx GIT repository.
A change request has been submitted to resolve this issue, so that future
AMD Vivado Design Suite versions will generate XSA files including the boot
firmware file named "psmfw.elf" to match the filename that is generated when
building the firmware.
In order to support both current and future versions of AMD Vivado Design
Suite, this patch changes the xilinx-prebuilt package to use the filename
"psm*fw.elf" when obtaining the Versal boot firmware images from a user
generated XSA file.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Runtime tests running on test runners are subject to a high
variability in term of performance and timing. Most or the runtime
test commands are executed with a timeout, in pexpect.
Slow or very loaded test runners can use the timeout_multiplier to
globally increase those timeouts.
Some runtime test commands sometimes needs to poll or query a state,
rather than having purely sequential actions. It is sometimes hard to
know, from the test writer point of view, the maximum timeout to set, or
if a retry logic is needed.
In order to help debugging runtime tests failing due very slow
execution, this commit adds extra information on the host test runner
about its load in the run log. Relevant information are: number of
cpus, the load average at the moment the emulator is started and the
current timeout_multiplier.
Note: this change was discussed in:
https://lists.buildroot.org/pipermail/buildroot/2024-July/759119.html
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The previous commit removes s6-test from the runtime tests. This
commit adds the same test for eltest, which replaced s6-test.
Signed-off-by: J. Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
s6-test was removed in s6-portable-utils 2.3.0.0, and replaced with
eltest (from execline). This change broke the existing runtime tests
with commit 42fad03182 ("packages: bump skalibs-related packages").
Instead of s6-test simply use the shell built-in "test", which provides
sufficient functionality.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7338388010
Signed-off-by: J. Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with gcc >= 14 which enables
-Werror=implicit-function-declaration
(https://gcc.gnu.org/gcc-14/porting_to.html):
nfs-stat.c: In function 'main':
nfs-stat.c:287:30: error: implicit declaration of function 'ctime' [-Wimplicit-function-declaration]
287 | printf("Access: %s", ctime( (const time_t *) &st.nfs_atime));
| ^~~~~
nfs-stat.c:177:1: note: 'ctime' is defined in header '<time.h>'; this is probably fixable by adding '#include <time.h>'
176 | #include <pwd.h>
+++ |+#include <time.h>
177 | char *uid_to_name(int uid)
Fixes:
- http://autobuild.buildroot.org/results/73c3828a4e5d275ca0dfdd5b314494e2b00393c8
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove patch which is now upstream
Rebase fix missing LOOP_SET_BLOCK_SIZE patch.
Update config options to match new expected format.
Add new nsresourced, mountfsd and vmspawn config options.
Add new systemd-journal-upload user for journald-remote.
Add new kernel config enable/disable options from systemd readme.
Add new optional dependencies and config options as appropriate.
LICENSES/README.md hash changed due to additional details added:
https://github.com/systemd/systemd/commit/fb747bd8cdcbeb55f9ef3c62289fff8ff5a25b68
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The libpwquality package provides the pam_pwquality PAM module - the
replacement for pam_cracklib that was dropped from linux-pam back in
version 1.5.0. However, it currently installs it to the wrong place,
so passwd and friends fail to find it. This commit sets the security
directory path to /lib/security to match the corresponding setting in
linux-pam.mk.
Note that libpwquality has *always* installed pam_pwquality in the wrong
place, since version 1.3.0 was added to buildroot in 2017 in commit
462040443c. However, back then, linux-pam
version 1.3.0 still provided pam_cracklib for advanced password checking.
Linux-pam deprecated pam_cracklib in 1.4.0 but still built it for us when
linux-pam.mk set --enable-cracklib. Linux-PAM deleted pam_cracklib
altogether in 1.5.0, so it was not until our update to linux-pam-1.5.1
in commit 276f1e0a89 that pam_cracklib
became unavailable. After that point, pam_pwquality was the only
alternative for PAM-based password checking.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Developers may have multiple output directories when building multiple
boards in parallel. A previous commit attempted to gitignore new output
directories automatically but broke some things (commit a14c862c08
"Create a .gitignore file in the CANONICAL_O directory").
To provide some support, ignore anything in the Buildroot directory that
starts with "output". This is a bit more cumbersome, but doesn't break
packages based on Python maturin.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The packages 'python-jsonschema-specifications', 'pydantic-core', and
likely other packages based on Python maturin silently stopped
installing files to the host and target directories after commit
a14c862c08.
A similar issue was reported by the Conda project[1]. It seems some
build tools scan for gitignore files to decide what files to build
and install.
I attempted various combinations of gitignore patterns including
mimicking the Conda project's gitignore[2], but the only thing that has
worked reliably is the original `/output` ignore in the root Buildroot
directory.
This reverts commit a14c862c08.
[1] https://github.com/PyO3/maturin/issues/1911
[2] https://github.com/conda-forge/conda-smithy/blob/main/conda_smithy/feedstock_content/.gitignore
Reported-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When using BR2_STATIC_LIBS=y, tinysshd's build was successful, but the
binary didn't work on the final target: this is because a dynamically
linked ELF was produced, on a target having no dynamic loader at all.
Using $(TARGET_CONFIGURE_OPTS) propagates all the options and not only
"CC", resulting in a correct static binary able to run on the target.
Without the patch:
> tinysshd: ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV),
> dynamically linked, interpreter /lib/ld-musl-armhf.so.1, stripped
With the patch:
> tinysshd: ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV),
> statically linked, stripped
Fixes: a7b3de8a3b
Signed-off-by: Martin Wetterwald <martin@wetterwald.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with powerpc64 raised since bump to
version 3.8.2 in commit 21eca49ed5:
In file included from /home/autobuild/autobuild/instance-23/output-1/build/libressl-3.8.4/crypto/rc4/rc4_enc.c:61:
/home/autobuild/autobuild/instance-23/output-1/build/libressl-3.8.4/crypto/../include/openssl/rc4.h:75:9: error: unknown type name 'RC4_INT'
75 | RC4_INT x, y;
| ^~~~~~~
Fixes: 21eca49ed5
- http://autobuild.buildroot.org/results/2533f8f642f435b40ce687b6df482c51a3fa0250
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libdex needs ucontext since its addition in commit
70319b47f6:
/home/autobuild/autobuild/instance-11/output-1/host/lib/gcc/aarch64-buildroot-linux-musl/13.3.0/../../../../aarch64-buildroot-linux-musl/bin/ld: src/libdex-1.a.p/dex-fiber.c.o: in function `dex_fiber_context_init':
/home/autobuild/autobuild/instance-11/output-1/build/libdex-0.6.1/build/../src/dex-fiber-context-private.h:131:(.text+0x30c): undefined reference to `getcontext'
[...]
In file included from ../src/dex-fiber-private.h:34,
from ../src/dex-scheduler.c:25:
../src/dex-fiber-context-private.h: In function '_dex_fiber_context_makecontext':
../src/dex-fiber-context-private.h:108:3: error: implicit declaration of function 'makecontext' [-Werror=implicit-function-declaration]
108 | makecontext (ucontext,
| ^~~~~~~~~~~
Fixes: 70319b47f6
- http://autobuild.buildroot.org/results/5f23b0e41f2957b0562c5d168f35e42f13bdad0b
- http://autobuild.buildroot.org/results/67d958e9a8e1dfb147ac7be4fcb74fcafbbce987
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix typos in QEMU arm-vexpress-tz readme file where 'i.e.' occurrences
should be replaced with 'e.g.'.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
NXP repositories moved to a new location. The old URL redirects to the
new one.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure without stack-protector raised since the
addition of the package in commit
70319b47f6:
/home/buildroot/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/i686-buildroot-linux-uclibc/9.3.0/../../../../i686-buildroot-linux-uclibc/bin/ld: src/libdex-1.a.p/dex-async-pair.c.o: in function `dex_async_pair_ready_callback':
dex-async-pair.c:(.text+0x118): undefined reference to `__stack_chk_guard'
Fixes: 70319b47f6
- http://autobuild.buildroot.org/results/f53768f654a9eddd95b583a366cd7386d9ddb285
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The previous commit ce00b93d5 (package/gamin: drop package) forgot to
remove the package/gamin/Config include from package/Config.in, which
triggers the following error.
package/Config.in:1645: can't open file "package/gamin/Config.in"
make: *** [Makefile:1027: raspberrypi2_defconfig] Error 1
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add new host-python-setuptools-scm-git-archive build dependency.
Add new python-jaraco-collections runtime dependency.
Add new python-more-itertools runtime dependency.
Add new python-zc-lockfile runtime dependency.
Drop no longer required python-six and python-jaraco-classes runtime
dependencies.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update optee-test to the latest tagged release
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update optee-examples to the latest tagged release
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ac_cv_func_strerror_r_char_p is hardcoded to no since commit
74b9bf9945 back in 2005 however strerror_r
only returns an int with musl. With glibc or uclibc, strerror_r returns
a char* or an int depending on _GNU_SOURCE value resulting in the
following build failure with gcc >= 14:
strerror_r.c: In function 'rpl_strerror_r':
strerror_r.c:207:9: error: assignment to 'int' from 'char *' makes integer from pointer without a cast [-Wint-conversion]
207 | ret = strerror_r (errnum, buf, buflen);
| ^
To fix this build failure, don't hardcode ac_cv_func_strerror_r_char_p
to let coreutils pick the correct value
Fixes:
- http://autobuild.buildroot.org/results/8bc649ca5490b0c29c90383edfa2e693f154ebc4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update hostapd to the latest release v2.11.
Enable 802.11be support.
Drop patch as it has been upstreamed.
README's copyright year was updated.
Signed-off-by: Lance Fredrickson <lancethepants@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This update addresses the issue of uClibc support by skipping ZFS tests
that require SEEK_DATA support.
This is a work-in-progress patch while we wait for an upstream fix.
Current upstream efforts can be followed here:
https://github.com/openzfs/zfs/pull/16169
Context:
- OpenZFS includes a test for a bug that occurs when copying a large
number of PUNCHED files.
- OpenZFS has backported this test to v2.2.x.
- uClibc does not support SEEK_DATA and SEEK_HOLE.
- The ZFS test `cp_stress` can not be compiled using uClibc.
This commit fix:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/7391793226
Signed-off-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The TestInitSystemNone bypasses the normal init and instead launches
directly into a shell. So it needs to bypass the login code and go
directly to a shell.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This test started failing at commit
0cad947b96
"support/testing/infra/emulator.py: fix qemu prompt detection" with the
error message
AttributeError: 'NoneType' object has no attribute 'run_command'
This is because we changed emulator.run() so that emulator.login() must
be called first. But this test skips the login and goes directly to a
shell. Use the new emulator.connect_shell() function which prepares the
shell without logging in.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
musl-libc doesn't support TEXTRELs[1] and programs with TEXTRELs will
crash on start-up under musl.
This patch forbids the use of TEXTRELs on musl toolchains with dynamic
linking.
To verify this patch:
- Delete package/micropython/0001-py-nlrthumb-Make-non-Thumb2-long-jump-workaround-opt.patch
- Build micropython (before v1.23) with a musl toolchain and
BR2_SHARED_LIBS. The build should abort while linking micropython.
[1]: https://www.openwall.com/lists/musl/2020/09/25/4
Signed-off-by: J. Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The following warning occurs from commit "boot/uboot: allow taking the
entire default environment from a text file".
boot/uboot/Config.in:141:warning: config symbol
'BR2_TARGET_UBOOT_DEFAULT_ENV_FILE' uses select, but is not bool or
tristate
Add a hidden 'bool' config so we can enable dependencies.
In addition, the DEFAULT_ENV_FILE works by setting Kconfig options,
therefore we also need to depend on
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
meson supports building both libraries (i.e. static and shared).
This will avoid the following build failure with flashrom and
BR2_SHARED_STATIC_LIBS raised since bump to version 1.4.0-rc2 in commit
8637884057:
../output-1/build/flashrom-1.4.0-rc2/meson.build:18:2: ERROR: Problem encountered:
Cannot build cli_classic with shared libflashrom. Use \'-Dclassic_cli=disabled\' to disable the cli,
or use \'--default-library=both\' to also build the classic_cli
Fixes: 8637884057
- http://autobuild.buildroot.org/results/6d484857ff1674bf81986505827e54f3f1b9aaec
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Drop patches (already in version)
- libevent is mandatory since
https://github.com/ffainelli/faifa/commit/d2339c2a7680e7c87555650e19123e27e1f12031
- This bump will fix the following build failure with gcc >= 14:
hpav_cfg.c: In function 'pushbutton_request':
hpav_cfg.c:256:37: error: passing argument 2 of 'send_vendor_pkt' makes pointer from integer without a cast [-Wint-conversion]
256 | return send_vendor_pkt(ctx, mac, HPAV_MMTYPE_MS_PB_ENC,
| ^~~
| |
| uint8_t {aka unsigned char}
hpav_cfg.c:123:64: note: expected 'const uint8_t *' {aka 'const unsigned char *'} but argument is of type 'uint8_t' {aka 'unsigned char'}
123 | static int send_vendor_pkt(struct context *ctx, const uint8_t *to,
| ~~~~~~~~~~~~~~~^~
hpav_cfg.c: In function 'main':
hpav_cfg.c:406:48: error: passing argument 2 of 'pushbutton_request' makes integer from pointer without a cast [-Wint-conversion]
406 | ret = pushbutton_request(&ctx, mac);
| ^~~
| |
| uint8_t * {aka unsigned char *}
hpav_cfg.c:254:60: note: expected 'uint8_t' {aka 'unsigned char'} but argument is of type 'uint8_t *' {aka 'unsigned char *'}
254 | static int pushbutton_request(struct context *ctx, uint8_t mac)
| ~~~~~~~~^~~
Fixes:
- http://autobuild.buildroot.org/results/5a65337366e52c6234d8d154b7e9a0296e02f1dd
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When OpenSSL support is enabled, luvi needs the engine support,
otherwise it fails with:
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/aarch64_be-none-linux-gnu/13.2.1/../../../../aarch64_be-none-linux-gnu/bin/ld: liblua_openssl.a(pkey.c.o): in function `openssl_pkey_set_engine':
pkey.c:(.text+0xac0): undefined reference to `ENGINE_get_DH'
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/aarch64_be-none-linux-gnu/13.2.1/../../../../aarch64_be-none-linux-gnu/bin/ld: pkey.c:(.text+0xaf4): undefined reference to `ENGINE_get_EC'
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/aarch64_be-none-linux-gnu/13.2.1/../../../../aarch64_be-none-linux-gnu/bin/ld: pkey.c:(.text+0xb20): undefined reference to `ENGINE_get_DSA'
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/aarch64_be-none-linux-gnu/13.2.1/../../../../aarch64_be-none-linux-gnu/bin/ld: pkey.c:(.text+0xb4c): undefined reference to `ENGINE_get_RSA'
collect2: error: ld returned 1 exit status
Fixes:
http://autobuild.buildroot.net/results/722c767985d75b82baec8c3ac55f8eaf1ed6d07b/https://gitlab.com/buildroot.org/buildroot/-/jobs/7391793024
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
sysprof unconditionally uses PERF_RECORD_MISC_MMAP_BUILD_ID which is
only available since kernel 5.12 and
https://github.com/torvalds/linux/commit/88a16a1309333e43d328621ece3e9fa37027e8eb
resulting in the following build failure with kernel < 5.12 since bump
to version 46.0 in commit 0d57555407:
../src/libsysprof/sysprof-sampler.c: In function 'sysprof_sampler_perf_event_stream_cb':
../src/libsysprof/sysprof-sampler.c:186:33: error: 'PERF_RECORD_MISC_MMAP_BUILD_ID' undeclared (first use in this function); did you mean 'PERF_RECORD_MISC_MMAP_DATA'?
186 | if ((event->header.misc & PERF_RECORD_MISC_MMAP_BUILD_ID) != 0)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| PERF_RECORD_MISC_MMAP_DATA
While at it, also fix a typo in "library"
Fixes: 0d57555407
- http://autobuild.buildroot.org/results/9a9f8462bd1d7127dc80de7f280ab9d100db47fe
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Disable tpm2-tss to avoid the following circular dependency if
BR2_PACKAGE_TPM2_TSS_FAPI is selected:
tpm2-tss -> libcurl -> gnutls -> tmp2-tss
resulting in the following build failure of libcurl or rtmpdump since
commit caff4179a4:
configure: error: TLS not detected, you will not be able to use HTTPS, FTPS, NTLM and more.
Use --with-openssl, --with-gnutls, --with-wolfssl, --with-mbedtls, --with-schannel, --with-secure-transport, --with-amissl, --with-bearssl or --with-rustls to address this.
[...]
In file included from rtmp.c:32:
rtmp_sys.h:110:10: fatal error: gnutls/gnutls.h: No such file or directory
110 | #include <gnutls/gnutls.h>
| ^~~~~~~~~~~~~~~~~
Fixes: caff4179a4
- http://autobuild.buildroot.org/results/72e1843de650c9ed4795f1141e9fd485b71a14c3
- http://autobuild.buildroot.org/results/918f0f7efa810b17f6d2266a890bf0150cbed146
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rebase S95mpd on commit 1f743f4 (package/openssh: tidy up init script)
$ utils/check-package package/mpd/S95mpd
61 lines processed
0 warnings generated
(smoke test on live system)
Signed-off-by: Andreas Ziegler <br015@umbiko.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Disable octave support which was added in commit
fab4830286 but untested as octave is not
installed to staging and raises the following build failure:
sparc64-linux-g++: ERROR: unsafe header/library path used in cross-compilation: '-I/usr/include/octave-3.8.1'
Fixing those issues is useless, as gtkiostream is not compatible with
latest octave version as it raises a bunch of errors:
Octave.C: In member function 'void Octave::startOctave(const std::vector<std::__cxx11::basic_string<char> >&)':
Octave.C:85:5: error: 'octave_main' was not declared in this scope; did you mean 'octave_map'?
85 | octave_main((int)argsIn.size(), (char**)&argsIn[0], embedded);
| ^~~~~~~~~~~
| octave_map
Octave.C: In member function 'int Octave::setGlobalVariable(const std::string&, Matrix&)':
Octave.C:283:50: error: use of deleted function 'octave::symbol_table::symbol_table()'
283 | octave_value ov=octave::symbol_table().global_varval(string(baseName));
| ^
In file included from /home/fabrice/buildroot/output/host/sparc64-buildroot-linux-gnu/sysroot/usr/include/octave-9.2.0/octave/octave-config.h:99,
from /home/fabrice/buildroot/output/host/sparc64-buildroot-linux-gnu/sysroot/usr/include/octave-9.2.0/octave/parse.h:29,
from Octave.C:18:
/home/fabrice/buildroot/output/host/sparc64-buildroot-linux-gnu/sysroot/usr/include/octave-9.2.0/octave/symtab.h:63:39: note: declared here
63 | OCTAVE_DISABLE_CONSTRUCT_COPY_MOVE (symbol_table)
| ^~~~~~~~~~~~
/home/fabrice/buildroot/output/host/sparc64-buildroot-linux-gnu/sysroot/usr/include/octave-9.2.0/octave/oct-conf-post-public.h:354:3: note: in definition of macro 'OCTAVE_DISABLE_CONSTRUCT_COPY_MOVE'
354 | X () = delete; \
| ^
Octave.C:284:34: error: use of deleted function 'octave::symbol_table::symbol_table()'
284 | octave::symbol_table().global_assign (string(baseName), setGlobalSubVariable(varNames, m, 0, ov));
| ^
/home/fabrice/buildroot/output/host/sparc64-buildroot-linux-gnu/sysroot/usr/include/octave-9.2.0/octave/symtab.h:63:39: note: declared here
63 | OCTAVE_DISABLE_CONSTRUCT_COPY_MOVE (symbol_table)
| ^~~~~~~~~~~~
/home/fabrice/buildroot/output/host/sparc64-buildroot-linux-gnu/sysroot/usr/include/octave-9.2.0/octave/oct-conf-post-public.h:354:3: note: in definition of macro 'OCTAVE_DISABLE_CONSTRUCT_COPY_MOVE'
354 | X () = delete; \
| ^
Octave.C:286:34: error: use of deleted function 'octave::symbol_table::symbol_table()'
286 | octave::symbol_table().global_assign (string(baseName), m);
| ^
/home/fabrice/buildroot/output/host/sparc64-buildroot-linux-gnu/sysroot/usr/include/octave-9.2.0/octave/symtab.h:63:39: note: declared here
63 | OCTAVE_DISABLE_CONSTRUCT_COPY_MOVE (symbol_table)
| ^~~~~~~~~~~~
/home/fabrice/buildroot/output/host/sparc64-buildroot-linux-gnu/sysroot/usr/include/octave-9.2.0/octave/oct-conf-post-public.h:354:3: note: in definition of macro 'OCTAVE_DISABLE_CONSTRUCT_COPY_MOVE'
354 | X () = delete; \
| ^
Octave.C: In member function 'octave_map Octave::setGlobalSubVariable(const std::vector<std::__cxx11::basic_string<char> >&, const Matrix&, int, octave_value&)':
Octave.C:302:38: error: 'class string_vector' has no member named 'lookup'
302 | whichIdx=base.map_keys().lookup(varNames[index+1]); // map_keys returns a string_vector
| ^~~~~~
Fixes: fab4830286
- http://autobuild.buildroot.org/results/9cfc420a4e41503635792472176583a8f81bb2a3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The kernel build needs host-openssl; add it to the configuration.
In practice the documented build recipe works fine and the build failures
can only be seen with highly parallel builds using per-package directories.
This fixes the following compilation error:
certs/extract-cert.c:21:10: fatal error: openssl/bio.h: No such file or directory
Fixes: 7115ab3918
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure raised since bump of glibc to version
2.39 in commit b5680f53d6:
In file included from /home/buildroot/instance-0/output-1/build/sconeserver-8d1935919a2013358993a8e9dfa992cbde56e503/sconex/ScriptBase.h:25,
from /home/buildroot/instance-0/output-1/build/sconeserver-8d1935919a2013358993a8e9dfa992cbde56e503/http/AuthRealm.h:26,
from /home/buildroot/instance-0/output-1/build/sconeserver-8d1935919a2013358993a8e9dfa992cbde56e503/http/AuthRealm.cpp:23:
/home/buildroot/instance-0/output-1/build/sconeserver-8d1935919a2013358993a8e9dfa992cbde56e503/sconex/sconex.h:124:12: fatal error: crypt.h: No such file or directory
124 | # include <crypt.h>
| ^~~~~~~~~
Fixes: b5680f53d6
- http://autobuild.buildroot.org/results/24461bdb0a5d9a062b682ae3aeefa73c0408040b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
mtd ubifs unconditionally calls the (deprecated) ENGINE_* logic in
libopenssl resulting in a build failure when
!BR2_PACKAGE_LIBOPENSSL_ENGINES since commit
623d3bbe43:
CCLD mkfs.ubifs
/home/autobuild/autobuild/instance-1/output-1/host/lib/gcc/powerpc64-buildroot-linux-gnu/13.3.0/../../../../powerpc64-buildroot-linux-gnu/bin/ld: ubifs-utils/mkfs.ubifs/mkfs_ubifs-sign.o: in function `sign_superblock_node':
sign.c:(.text+0x328): undefined reference to `ENGINE_load_builtin_engines'
Fixes: 623d3bbe43
- http://autobuild.buildroot.org/results/1fd49b193a3623d244ace602c46f15914bfbcff4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Enable DES in openssl to avoid the following build failure raised since
commit a83d41867c:
crypto/apr_crypto_openssl.c: In function 'crypto_cipher_mechanism':
crypto/apr_crypto_openssl.c:385:27: error: implicit declaration of function 'EVP_des_ede3_cbc'; did you mean 'NID_des_ede3_cbc'? [-Wimplicit-function-declaration]
385 | key->cipher = EVP_des_ede3_cbc();
| ^~~~~~~~~~~~~~~~
| NID_des_ede3_cbc
Fixes: a83d41867c
- http://autobuild.buildroot.org/results/4b1088a705f8564f85e629316f5cfc92953f0047
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
librelp unconditionally calls the (deprecated) ENGINE_* logic in
libopenssl resulting in a build failure when
!BR2_PACKAGE_LIBOPENSSL_ENGINES since commit
623d3bbe43:
tcp.c: In function 'relpTcpExitTLS_ossl':
tcp.c:1992:17: error: implicit declaration of function 'ENGINE_cleanup'; did you mean 'EVP_PBE_cleanup'? [-Wimplicit-function-declaration]
1992 | ENGINE_cleanup();
| ^~~~~~~~~~~~~~
| EVP_PBE_cleanup
Fixes: 623d3bbe43
- http://autobuild.buildroot.org/results/68a1e94e077d8d57690a2543e557ba3f2974b03e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Change the name from "Micro Python" (two words) to "MicroPython"
(camelcase), to match the official website and documentation.
Signed-off-by: J. Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix patch fuzz to avoid the following build failure raised since commit
8f88a644ed which reduced the fuzz factor:
Applying 0002-fix-build-with-libressl-3.5.0.patch using patch:
patching file include/zbxcomms.h
Hunk #1 succeeded at 210 (offset -43 lines).
patching file src/libs/zbxcomms/tls.c
Hunk #1 FAILED at 30.
1 out of 1 hunk FAILED -- saving rejects to file src/libs/zbxcomms/tls.c.rej
While at it, also fix Upstream tags
Fixes: 8f88a644ed
- http://autobuild.buildroot.org/results/75dfe12312b5479669fcdfea623d93880c675e13
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Disable -Werror to avoid the following build failure raised since switch
to meson-package in commit 37dded43ae:
../stlinkv3_spi.c: In function 'stlinkv3_spi_init':
../stlinkv3_spi.c:508:12: error: 'stlinkv3_handle' may be used uninitialized [-Werror=maybe-uninitialized]
508 | if (!stlinkv3_handle) {
| ^
../stlinkv3_spi.c:485:31: note: 'stlinkv3_handle' was declared here
485 | libusb_device_handle *stlinkv3_handle;
| ^~~~~~~~~~~~~~~
Fixes: 37dded43ae
- http://autobuild.buildroot.org/results/eecabbdd0d21344991379a57e605845e73ef679e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with gcc >= 14:
termcap.c:45:14: error: conflicting types for 'boolcodes'; have 'char *[]'
45 | static char *boolcodes[] = {
| ^~~~~~~~~
In file included from ../../Src/zshterm.h:1,
from ../../Src/zsh_system.h:932,
from ../../Src/zsh.mdh:17,
from termcap.mdh:17,
from termcap.c:38:
/home/autobuild/autobuild/instance-0/output-1/host/or1k-buildroot-linux-uclibc/sysroot/usr/include/term.h:764:56: note: previous declaration of 'boolcodes' with type 'const char * const[]'
764 | extern NCURSES_EXPORT_VAR(NCURSES_CONST char * const ) boolcodes[];
| ^~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/fe2f7170465e96cc1de3dae139a25f615331f4b9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Select BR2_PACKAGE_ALSA_LIB_MIXER if needed to fix the following build
failure with alsa-lib raised since the addition of the package in commit
fab4830286:
In file included from ../include/ALSA/MixerElement.H:20,
from ../include/ALSA/Mixer.H:20,
from ../include/ALSA/ALSA.H:56,
from ALSAControlMonitor.C:19:
../include/ALSA/MixerElementTypes.H:26:5: error: 'snd_mixer_selem_channel_id_t' does not name a type
26 | snd_mixer_selem_channel_id_t channel; ///< The ALSA channel ID
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: fab4830286
- http://autobuild.buildroot.org/results/6be71c9fbdccbdf4f5e540bafa748dda833aeedb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with gcc >= 14:
libcli.c: In function 'cli_register_command':
libcli.c:430:27: error: 'calloc' sizes specified with 'sizeof' in the earlier argument and not in the later argument [-Werror=calloc-transposed-args]
430 | if (!(c = calloc(sizeof(struct cli_command), 1))) return NULL;
| ^~~~~~
libcli.c:430:27: note: earlier argument should specify number of elements, later size of each element
Fixes:
- http://autobuild.buildroot.org/results/a170d27689e069cf58f830bdd74f604364ee503b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Include stdio.h to avoid that __progname check wrongly returned that
the function is unavailable with gcc >= 14 which enables
-Werror=implicit-function-declaration
(https://gcc.gnu.org/gcc-14/porting_to.html):
configure:5231: checking if libc defines __progname
configure:5249: /home/autobuild/autobuild/instance-7/output-1/host/bin/sh4-buildroot-linux-musl-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -static -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static conftest.c >&5
conftest.c: In function 'main':
conftest.c:73:27: error: implicit declaration of function 'printf' [-Wimplicit-function-declaration]
73 | extern char *__progname; printf("%s", __progname);
| ^~~~~~
conftest.c:1:1: note: include '<stdio.h>' or provide a declaration of 'printf'
1 | /* confdefs.h */
conftest.c:73:27: warning: incompatible implicit declaration of built-in function 'printf' [-Wbuiltin-declaration-mismatch]
73 | extern char *__progname; printf("%s", __progname);
| ^~~~~~
conftest.c:73:27: note: include '<stdio.h>' or provide a declaration of 'printf'
resulting in the following static build failure:
/home/autobuild/autobuild/instance-7/output-1/host/lib/gcc/sh4-buildroot-linux-musl/14.1.0/../../../../sh4-buildroot-linux-musl/bin/ld: /home/autobuild/autobuild/instance-7/output-1/host/sh4-buildroot-linux-musl/sysroot/lib/libc.a(libc.o):(.bss.__progname+0x0): multiple definition of `__progname'; autossh.o:(.bss+0x120): first defined here
Fixes:
- http://autobuild.buildroot.org/results/5d80a8096d0f5529cbd86903a74f3bab3d230f4a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with host gcc >= 14 which enables
-Werror=implicit-function-declaration
(https://gcc.gnu.org/gcc-14/porting_to.html):
configure:9998: checking build system compiler /usr/bin/gcc
configure:10011: /usr/bin/gcc conftest.c
conftest.c: In function 'main':
conftest.c:4:3: error: implicit declaration of function 'exit' [-Wimplicit-function-declaration]
4 | exit(0);
| ^~~~
conftest.c:1:1: note: include '<stdlib.h>' or provide a declaration of 'exit'
+++ |+#include <stdlib.h>
1 | int
conftest.c:4:3: warning: incompatible implicit declaration of built-in function 'exit' [-Wbuiltin-declaration-mismatch]
4 | exit(0);
| ^~~~
conftest.c:4:3: note: include '<stdlib.h>' or provide a declaration of 'exit'
configure:10014: $? = 1
configure:10021: result: no
configure:10026: error: Specified CC_FOR_BUILD doesn't seem to work
Fixes:
- http://autobuild.buildroot.org/results/3ab381f06d5dc030039b6f6f8d19feb55cf3367d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When the tipidee package was added in commit
17deaf60f6, the committer refactored it so
no separate boolean option is required to enable the config file.
However, in doing so, the case where the config file is empty was not
correctly handled: BR2_PACKAGE_TIPIDEE_CONFIG_FILE is never empty
because even with the empty string it contains "".
Fox by qstrip'ing before checking for empty.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The tpm2_ptool script appears on several TPM2 tutorials and it's
packaged as the "tpm2-pkcs11-tools" package in several Linux
distribution.
Add a new tpm2-pkcs11 option to install tpm2_ptool script along with
its dependencies.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When the default (newest) kernel headers series changes the build can
break. Example error message:
Incorrect selection of kernel headers: expected 6.8.x, got 6.5.x
In the above case the defconfig used:
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.5.9"
The kernel headers were not specified, so the build defaulted to using
the kernel sources as header source and the default (newest) header
series. From .config:
BR2_KERNEL_HEADERS_AS_KERNEL=y
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_8=y
Signed-off-by: Gero Schwäricke <gero.schwaericke@posteo.de>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
We need to backport a patch so that the correct poetry build backend
is used.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
We need to set --skip-dependency-check to prevent pytest-runner from
being required to build python-dictdiffer.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This package provides espflash. A serial flasher utilities for
Espressif devices, based loosely on esptool.py. Supports the
ESP32, ESP32-C2/C3/C6, ESP32-H2, ESP32-P4, and ESP32-S2/S3.
Signed-off-by: Torben Voltmer <mail@t-voltmer.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This moves some configs in the defconfigs and removes some comments so
the defconfig files look similar.
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This installs the device-tree blobs for the Compute Module 4 and Compute
Module 4s.
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There are two kind of device-tree blobs up to the Rasperry Pi 3[1][2]:
- the downstream dtbs are named after the die name (i.e. BCM27xx)
- the upstream dtbs are name after the package name (i.e. BCM283x)
Every defconfigs install exclusively the downstream device-tree blob, at
the exception of the raspberrypi3_64_defconfig that installs both since
the begining.
This removes the upstream device-tree blob for the beauty of
consistency.
Note: It is possible to load the upstream device-tree using the
upstream_kernel property[3].
Raspberry Pi, Compute Module, Raspberry Pi Zero and Raspberry Pi Zero W
use bcm2835 for upstream and bcm2708 for downstream.
Raspberry Pi 2 uses bcm2836 for upstream and bcm2709 for downstream.
Raspberry Pi 2 rev 1.2, Raspberry Pi 3, Compute Module 3/3+ and
Raspberry Zero 2 W use bcm2837 for upstream and bcm2709 for downstream.
Raspberry Pi 4/400 and Compute Module 4/4s uses bcm2711 and Raspberry Pi
5 uses bcm2712.
[1]: https://github.com/raspberrypi/linux/issues/3237
[2]: https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#flagship-series
[3]: https://www.raspberrypi.com/documentation/computers/legacy_config_txt.html#upstream_kernel
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This installs the device-tree blob for the Compute Module 3.
Note: The 32-bit raspberrypi3_defconfig installs this Device Tree
since a726c7dff8
(configs/raspberrypi3_defconfig: add raspberry pi 3 compute module
support).
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add qt6 version of qtopcua from git as it's not contained in the
official qt release submodule directory.
Fulfill the mandatory dependency on qt6base, and qt6base-network in
particular, as well as the need for host tool qopcuaxmldatatypes2cpp
which is provided by host-qt6opcua.
For host-qt6opcua set the dependency on host-qt6base-network as well.
Existence of the optional dependency openssl enables
FEATURE_open62541_security. (This has changed from qt5opcua where
mbedtls was supported.)
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
*ucontext functions are only implemented for a subset of
uClibc supported architectures. To allow the external library
libucontext to be used this small patch is required.
Tested for riscv64.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When glibc was bumped to version 2.39 in commit
b5680f53d6, it removed the deprecated
libcrypt support.
Until the upgrade of glibc to 2.39, Busybox could rely on the libcrypt
provided by glibc. Since version 2.39, glibc no longer provides
libcrypt, causing a build failure with Busybox configurations that
have CONFIG_USE_BB_CRYPT disabled.
To fix this, add the libxcrypt dependency to Busybox when
BR2_PACKAGE_LIBXCRYPT is selected. The user is still responsible for
enabling BR2_PACKAGE_LIBXCRYPT when their Busybox configuration has
CONFIG_USE_BB_CRYPT disabled.
Signed-off-by: Fred Lefranc <fred.lefranc+evs@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that the sshd init script is nice & new & shiny, fix an ancient
typo, introduced with commit e0fc615 (add runlevel script for later use)
Signed-off-by: Andreas Ziegler <br015@umbiko.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Previously, Python builds could intermittently fail when removing files
if `find` removed a directory before searching within it [0].
An arbitrary example:
/tmp/tmp.h9KMUse5zO $ find . -type d -name __pycache__ -exec rm -rvf {} \; ; echo -e "RETURN CODE: $?"
removed directory './a/b/c/d/e/__pycache__'
find: ‘./a/b/c/d/e/__pycache__’: No such file or directory
removed directory './a/b/c/d/e/f/__pycache__'
find: ‘./a/b/c/d/e/f/__pycache__’: No such file or directory
removed directory './a/b/c/d/e/f/g/__pycache__'
RETURN CODE: 1
Now, pass the `-depth` argument to `find` so a depth-first search is
performed to avoid trying to search within an already deleted folder.
Fixes: 54d48c8cad ("package/python3: miscellaneous fixups")
Fixes: http://autobuild.buildroot.net/results/ba1d4213ae9912d53412ded6d8e257b67a4f7c0e/
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
evemu ships with an ancient py-compile script (from 2011) depending
the imp module, which was finally removed in Python 3.12.
Set autoreconf in order to get an up to date version of py-compile
which automatically handles the different python versions.
This is a similar problem as in
42eae73ef1 package/cracklib: python needs autoreconf
Fixes:
http://autobuild.buildroot.org/results/a52/a520583be6e86993d268d6535f727a352bd92028/
and many other configs where Python3 is selected and thus evemu
is configured to build the python-bindings.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Dependencies changed: inih dependency was removed, glib2 and lua added.
Tio's meson build system fails to find luajit, so exclude that,
otherwise all versions of lua >= 5.1 are supported.
Retested the build for sparc and sparc64 and the compile issues have
been resolved upstream by reworking the baudrate selection code quite a
while ago[1].
Disable installation of man pages with new build option.
[1] https://github.com/tio/tio/commit/a23be7f2c2bacef428b0e50aa93e37e5b52bdd56
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Release Notes: https://nodejs.org/en/blog/release/v20.15.1
Fixes the following CVE's:
CVE-2024-36138 - Bypass incomplete fix of CVE-2024-27980 (High)
CVE-2024-22020 - Bypass network import restriction via data URL (Medium)
CVE-2024-22018 - fs.lstat bypasses permission model (Low)
CVE-2024-36137 - fs.fchown/fchmod bypasses permission model (Low)
CVE-2024-37372 - Permission model improperly processes UNC paths (Low)
Also these additional CVE's were fixed in the v20.12.1 and v20.12.2 releases [1][2]:
CVE-2024-27983 - Assertion failed in node::http2::Http2Session::~Http2Session() leads to HTTP/2 server crash- (High)
CVE-2024-27982 - HTTP Request Smuggling via Content Length Obfuscation - (Medium)
CVE-2024-27980 - Command injection via args parameter of child_process.spawn without shell option enabled on Windows
NodeJS tests are passing:
$ ./support/testing/run-tests -o ./outputs/ -k tests.package.test_nodejs -d dl
12:02:58 TestNodeJSModuleHostSrc Starting
12:02:58 TestNodeJSModuleHostSrc Building
13:17:15 TestNodeJSModuleHostSrc Building done
13:17:23 TestNodeJSModuleHostSrc Cleaning up
.13:17:23 TestNodeJSModuleHostBin Starting
13:17:23 TestNodeJSModuleHostBin Building
14:06:15 TestNodeJSModuleHostBin Building done
14:06:20 TestNodeJSModuleHostBin Cleaning up
.14:06:20 TestNodeJSBasic Starting
14:06:20 TestNodeJSBasic Building
14:55:40 TestNodeJSBasic Building done
14:55:45 TestNodeJSBasic Cleaning up
LICENSE hash changed due to changes in vendored components:
* copyright year update and adding spdx identifier [1]
[1] https://nodejs.org/en/blog/release/v20.12.1
[2] https://nodejs.org/en/blog/release/v20.12.2
[3] https://github.com/nodejs/node/commit/d5a316f5ea3fade3140c2ae35c144b500fb5d758
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Expose --with-dns-delay=SEC configure option to fine tune retry interval
to match that of the system resolver.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- New command line flag -l to control klogctl(2) on/off and allow raw
kernel logs to console, use with 'quiet' kernel cmdline option
- Add reload command for systemd service
- Add *.conf support for rotate_size and rotate_count
- Add *.conf support for listen addr:port
- Fix blocking delay for unresolvable DNS names when logging to remote
- Fix failure to bind to not-yet-set IP address by retrying every 5 sec
Full ChangeLog at https://github.com/troglobit/sysklogd/releases/tag/v2.6.0
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The meson build system will be useful in future commits to have a
proper installation in staging with pkg-config files.
Drop Makefile patch which is no longer relevant.
Backport a patch removing _LARGEFILE64_SOURCE which can result in a
redefinition build error.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the raspberry pi picotool for interacting with rp2040 binaries and
devices.
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the pi-pico sdk as a dependency for picotool. This is a bit of a
weird package, because you normally clone the git repository and point
the picotool (or rp2040 firmware project) build to it.
For picotool specifically, only headers are used from the sdk, for
building a firmware project, it is included as source files via cmake,
so this pretty much has the same semantics for that as well.
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Sources of packages which are using the 'local' _METHOD_SITE or
which declare an _OVERRIDE_SRC_DIR are not archived when generating
the legal-info target.
This is problematic since those packages are the most likely to
require being published, because it's highly probable that their
sources have been modified. A typical use case is a package (e.g. linux)
that is maintained as a git submodule of the BR2_EXTERNAL and with the
LINUX_OVERRIDE_SRCDIR set appropriately, or with a tool like repo
putting it in a well-known location.
This patch generates a tar.gz archive on the fly, containing the
result of the rsync of the package's source directory, using the
same arguments as during the preparation of a build.
Note that is not possible to archive the builddir, since it may
contain artifacts of previous compilations.
In order to create a tarball that is reproducible, we reuse the
mk_tar_gz function from the download helpers. We have to provide it with
the TAR variable. We also have to cd to the build directory first,
because the script generates a temporary file in the current directory.
That script needs a date. We unforuntately don't have a good
reproducible data. The timestamps of the files in the override srcdir
itself aren't useful either: if they come from git, they typically have
the time of checkout. Therefore, we fix the date at Jan 1, 1970 (which
we can do with @0).
The mk_tar_gz function could actually work directly in the override
srcdir without the need for an rsync - except for one limitation: it
doesn't have the equivalent of RSYNC_VCS_EXCLUSIONS. It would be nice to
refactor the script so it could accept a list of exclusions instead of a
single one and also work at any level instead of just the toplevel. But
that is for future improvement.
It is not possible to consider rsync as a "normal" download method
either (which would have solved the initial problem), because if we
do that:
* the DL dir's content would be altered improperly
* the rsync + tar gz overhead would be paid on compilation and is
significant, for example, for a linux kernel
* a hash file would be necessary, which would be a burden to
maintain, for sources frequently modified
Signed-off-by: Nicolas Carrier <carrier.nicolas0@gmail.com>
[Arnout:
- Drop the auxiliary variables: their use is contained within one code
block and it's easier to read with being explicit.
- Put it in an additional subdirectory .legal-info-rsync of the build
directory, to reduce the chance of conflict with an existing
file/directory.
- Archive the directory (e.g. linux-custom) rather than its contents,
so that it matches a normal tarball.
- Use the mk_tar_gz function from download helpers to create a
reproducible tarball.
- Split long lines.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
By default U-Boot builds a default environment from its own configuration
and a board-specific set of variables. However it also allows to bypass
this entirely and define the entire default environment from a text file.
Expose this feature to Buildroot. This allows to have a file e.g. in
board/.../uboot.env which contains an easy to maintain text file with the
wanted default environment, without patching the U-Boot source code.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Add "Upstream: N/A" tag for patches that were not sent upstream. These
are all patches that would not be acceptable for upstream.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit 9a66711be1 ("package/tar: fix
linking with libiconv") added two patches that patch Makefile.am
files, but it forgot to add TAR_AUTORECONF = YES.
However, a gotcha is that TAR_AUTORECONF = YES would apply to both the
target tar, but also the host tar. But for host-tar, we can't accept
to do an autoreconf, because this would cause host-tar to have a
dependency on host-{autoconf,automake,libtool}, which in turn would
have a dependency on host-tar.
Since anyway the patches 0002/0003 that modify Makefile.am are only
useful to fix a libiconv problem that occurs when building target tar,
we disable autoreconf for host-tar, and we prevent automatic
autoreconf by touching the right Makefile.in files. This mess can be
dropped next time we update tar, as 0002/0003 will be part of the next
tar release.
Fixes:
http://autobuild.buildroot.net/results/efdf7cf9ede810ed7f766cc4138b16054bc0c18a/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some specific versions of OP-TEE need cmake on the host to build the scmi
firmware, like the newly release STMicroelectronics 3.19.0-stm32mp-r2
version.
To allow building such OP-TEE OS versions, this commit adds the option
BR2_TARGET_OPTEE_OS_NEEDS_CMAKE which when enabled ensures that host-cmake
is built before OP-TEE OS.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[Arnout: use BR2_CMAKE_HOST_DEPENDENCY]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Add initial support for STM32MP257 GPU drivers.
gcnano-binaries will be configured for STM32MP1 platforms on ARM 32-bits
and STM32MP2 on ARM 64-bits.
Update to the latest version of the gcnano-binaries blobs, which are
compatible with the last v6.1-stm32mp-r2 kernel from the
STMicroelectronics BSP.
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Add missing ' to fix `make help'.
This fixes the following error:
/bin/bash: -c: line 1: unexpected EOF while looking for matching `''
make: *** [Makefile:1180: help] Error 2
Fixes: ca6c896bdd
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Steve Hay <me@stevenhay.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The patch adds the possibility to create, in addition to the usual
image, an image of type bmap that drastically reduces the amount of
data that needs to be written to an SD card, resulting in time
savings.
It looks at whether BR2_PACKAGE_HOST_BMAP_TOOLS is enabled to decide
whether it should or not generate bmap tool images. It generates bmap
images for all images referenced in the genimage configuration file,
as long as they exist in $(BINARIES_DIR).
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is needed to support a host build of gnupg2. It is not directly
selectable.
Signed-off-by: Ben Hutchings <ben.hutchings@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is needed to support a host build of gnupg2. It is not directly
selectable.
Signed-off-by: Ben Hutchings <ben.hutchings@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This variable was added in commit
62c7857dfa ("package/libassuan: add host
variant"), but in fact does not make sense for a host
package. Indeed, config scripts only need to be tweaked for target
packages, and in any case, the <pkg>_CONFIG_SCRIPTS variable is only
used during staging installation (to tweak the config scripts) and
during target installation (to remove them), and neither staging nor
target installation are relevant for host packages.
Therefore, let's remove this small piece of dead code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This variable was added in commit
6a4ad23a07 ("package/libgpgme: add host
variant"), but in fact does not make sense for a host package. Indeed,
config scripts only need to be tweaked for target packages, and in any
case, the <pkg>_CONFIG_SCRIPTS variable is only used during staging
installation (to tweak the config scripts) and during target
installation (to remove them), and neither staging nor target
installation are relevant for host packages.
Therefore, let's remove this small piece of dead code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is needed to support a host build of gnupg2. It is not directly
selectable.
Signed-off-by: Ben Hutchings <ben.hutchings@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit ca9e08277c ("package/qt5: bump
packages to latest kde submodule versions"), the version of Qt5 was
bumped to 5.15.14. This means that the version of qt5webengine being
built is now qtwebengine-v5.15.14-lts.tar.bz2.
However, qt5webengine-chromium is packaging a submodule of
qtwebengine, so we must keep them in sync, and therefore it should
have been updated.
The current version of qt5webengine-chromium,
0ad2814370799a2161057d92231fe3ee00e2fe98, was matching with
5.15.11-lts, but for 5.15.14-lts, we need to use
18c9261dc5b8aa57a0bdd5b62ce6f648cca1ef5e, as can be seen at:
https://github.com/qt/qtwebengine/tree/v5.15.14-lts/src (thirdparty submodule)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When we use Buildroot's re2 package to build qt5webengine, there is an
issue at link time as the qt5webengine mistakenly uses the abseil-cpp
headers of its built-in copy rather than the ones of our abseil-cpp
library, built as a dependency of re2. However, we build our
abseil-cpp differently than the one bundled, and that causes some
conflicts.
Since teaching Chromium's build system to not use its own abseil-cpp
headers is an adventure we'd rather not engage into, we fallback to
use the bundled re2.
Therefore, we drop in Config.in all dependencies that were inherited
from Buildroot's re2 package. This warrants a few comments:
- BR2_PACKAGE_LIBABSEIL_CPP_ARCH_SUPPORTS should be dropped because
the list of architectures supported by our Buildroot abseil-cpp
package may be different than the set of architectures supported by
the bundled abseil-cpp in Chromium. In addition, the list of
architectures in BR2_PACKAGE_QT5WEBENGINE_ARCH_SUPPORTS is also a
very limited subset of BR2_PACKAGE_LIBABSEIL_CPP_ARCH_SUPPORTS, so
this change will not expose the build of qt5webengine to additional
architectures.
- We're dropping BR2_TOOLCHAIN_GCC_AT_LEAST_8 because it was inherited
from re2. The main qt5 package anyway depends on gcc >= 5.x. We will
figure out thanks to the autobuilders exactly which gcc version is
needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Buildroot has moved to a modern ffmpeg, and the version of Chromium
part of qtwebengine is not ready to work with this modern version of
ffmpeg. While Chromium has been updated upstream to support a more
recent ffmpeg, it requires the backport of too many patches, so let's
use the bundled ffmpeg.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Backport a small subset of an upstream patch to fix:
../../3rdparty/chromium/gpu/command_buffer/service/program_manager.cc: In member function ‘std::string gpu::gles2::Program::ProcessLogInfo(const std::string&)’:
../../3rdparty/chromium/gpu/command_buffer/service/program_manager.cc:623:25: error: ‘using re2::StringPiece = class absl::string_view’ {aka ‘class absl::string_view’} has no member named ‘as_string’
623 | return output + input.as_string();
| ^~~~~~~~~
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
Traceback (most recent call last):
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/core/release/../../3rdparty/chromium/components/resources/ssl/ssl_error_assistant/gen_ssl_error_assistant_proto.py", line 71, in <module>
sys.exit(main())
^^^^^^
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/core/release/../../3rdparty/chromium/components/resources/ssl/ssl_error_assistant/gen_ssl_error_assistant_proto.py", line 68, in main
return SSLErrorAssistantProtoGenerator().Run()
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/components/resources/protobufs/binary_proto_generator.py", line 200, in Run
self._ImportProtoModules(opts.path)
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/components/resources/protobufs/binary_proto_generator.py", line 107, in _ImportProtoModules
self.ImportProtoModule()
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/core/release/../../3rdparty/chromium/components/resources/ssl/ssl_error_assistant/gen_ssl_error_assistant_proto.py", line 33, in ImportProtoModule
import ssl_error_assistant_pb2
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/core/release/pyproto/components/security_interstitials/content/ssl_error_assistant_pb2.py", line 9, in <module>
from google.protobuf import reflection as _reflection
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/core/release/pyproto/google/protobuf/reflection.py", line 51, in <module>
from google.protobuf import message_factory
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/core/release/pyproto/google/protobuf/message_factory.py", line 49, in <module>
from google.protobuf.internal import python_message as message_impl
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/core/release/pyproto/google/protobuf/internal/python_message.py", line 59, in <module>
from six.moves import range
ModuleNotFoundError: No module named 'six.moves'
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Further down the build:
FAILED: gen/components/resources/ssl/ssl_error_assistant/ssl_error_assistant.pb
/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/host-bin/python ../../3rdparty/chromium/components/resources/ssl/ssl_error_assistant/gen_ssl_error_assistant_proto.py -w -i ../../3rdparty/chromium/components/resources/ssl/ssl_error_assistant/ssl_error_assistant.asciipb -d gen/components/resources/ssl/ssl_error_assistant -o ssl_error_assistant.pb -p pyproto -p pyproto/components/security_interstitials/content/
Traceback (most recent call last):
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/core/release/../../3rdparty/chromium/components/resources/ssl/ssl_error_assistant/gen_ssl_error_assistant_proto.py", line 23, in <module>
from binary_proto_generator import BinaryProtoGenerator
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/components/resources/protobufs/binary_proto_generator.py", line 12, in <module>
import imp
ModuleNotFoundError: No module named 'imp'
Backport an upstream patch fixing this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the "-webengine-icu" config option qt5webengine uses icu headers
on the build host. Unfortunately, the build fails with:
/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/host-bin/python "../../3rdparty/chromium/build/toolchain/gcc_link_wrapper.py" --output="v8_snapshot/gen-regexp-special-case" -- /usr/bin/g++ -pie -Wl,--fatal-warnings -Wl,--build-id=sha1 -fPIC -Wl,-z,noexecstack -Wl,-z,relro -Wl,-z,now -Wl,-z,defs -Wl,--as-needed -m32 -pie -Wl,--disable-new-dtags -Wl,-O2 -Wl,--gc-sections -L/usr/lib -o "v8_snapshot/gen-regexp-special-case" -Wl,--start-group @"v8_snapshot/gen-regexp-special-case.rsp" -Wl,--end-group -ldl -lpthread -lrt -licui18n -licuuc -licudata
/usr/bin/ld: skipping incompatible /usr/lib/x86_64-linux-gnu/libicui18n.so when searching for -licui18n
/usr/bin/ld: skipping incompatible /usr/lib/x86_64-linux-gnu/libicui18n.a when searching for -licui18n
/usr/bin/ld: cannot find -licui18n
/usr/bin/ld: skipping incompatible /usr/lib/x86_64-linux-gnu/libicuuc.so when searching for -licuuc
/usr/bin/ld: skipping incompatible /usr/lib/x86_64-linux-gnu/libicuuc.a when searching for -licuuc
/usr/bin/ld: cannot find -licuuc
/usr/bin/ld: skipping incompatible /usr/lib/x86_64-linux-gnu/libicudata.so when searching for -licudata
/usr/bin/ld: skipping incompatible /usr/lib/x86_64-linux-gnu/libicudata.a when searching for -licudata
/usr/bin/ld: cannot find -licudata
/usr/bin/ld: skipping incompatible /usr/lib/libgcc_s.so.1 when searching for libgcc_s.so.1
collect2: error: ld returned 1 exit status
So use the bundled icu instead, as it needs an icu with a bitness
matching the bitness of the target, and other complexities.
Signed-off-by: Kadir Yilmaz <kadir.c.yilmaz@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Further down the build, another issue:
Traceback (most recent call last):
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/core/release/../../3rdparty/chromium/tools/grit/grit.py", line 29, in <module>
sys.exit(grit.grit_runner.Main(sys.argv[1:]))
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/tools/grit/grit/grit_runner.py", line 314, in Main
return toolobject.Run(options, args[1:])
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/tools/grit/grit/tool/build.py", line 254, in Run
self.res = grd_reader.Parse(opts.input,
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/tools/grit/grit/grd_reader.py", line 231, in Parse
handler.root.AssignFirstIds(filename_or_stream, defines)
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/tools/grit/grit/node/misc.py", line 592, in AssignFirstIds
src_root_dir, first_ids = _ReadFirstIdsFromFile(first_ids_filename,
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/tools/grit/grit/node/misc.py", line 56, in _ReadFirstIdsFromFile
first_ids_dict = eval(util.ReadFile(filename, 'utf-8'))
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/tools/grit/grit/util.py", line 215, in ReadFile
with io.open(abs(filename), mode, encoding=encoding) as f:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
ValueError: invalid mode: 'rU'
Let's backport an upstream Chromium commit fixing this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Further down into the build, another issue pops up:
/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/host-bin/python ../../3rdparty/chromium/tools/grit/grit.py update_resource_ids -o gen/tools/gritsettings/default_resource_ids --add-header --depfile gen/tools/gritsettings/default_resource_ids.d ../../3rdparty/chromium/tools/gritsettings/resource_ids.spec
Traceback (most recent call last):
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/core/release/../../3rdparty/chromium/tools/grit/grit.py", line 14, in <module>
import grit.grit_runner
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/tools/grit/grit/grit_runner.py", line 19, in <module>
from grit import util
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/tools/grit/grit/util.py", line 21, in <module>
from six.moves import html_entities as entities
ModuleNotFoundError: No module named 'six.moves'
Let's fix it with the partial backport of a much bigger upstream
commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We have the qt5webengine-chromium-catapult package to override the
catapult code from qtwebengine-chromium with a newer version. It was
initially introduced because the catapult code in qtwebengine-chromium
was not Python 3.x compatible.
Turns out that the catapult version we're using exhibits new build
issues related to Python 3.12 (and perhaps others), so let's update it
again to fix:
FAILED: gen/content/browser/tracing/about_tracing.js gen/content/browser/tracing/about_tracing.html
/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/host-bin/python ../../3rdparty/chromium/third_party/catapult/tracing/bin/generate_about_tracing_contents --outdir gen/content/browser/tracing
/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/third_party/catapult/common/py_vulcanize/py_vulcanize/html_generation_controller.py:21: SyntaxWarning: invalid escape sequence '\('
if re.search('url\(.+\)', contents):
/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/third_party/catapult/common/py_vulcanize/py_vulcanize/style_sheet.py:63: SyntaxWarning: invalid escape sequence '\('
return re.sub('url\((?P<quote>"|\'|)(?P<url>[^"\'()]*)(?P=quote)\)',
/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/third_party/catapult/common/py_vulcanize/py_vulcanize/style_sheet.py:75: SyntaxWarning: invalid escape sequence '\('
'url\((?:["|\']?)([^"\'()]*)(?:["|\']?)\)',
/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/third_party/catapult/common/py_vulcanize/py_vulcanize/js_utils.py:7: SyntaxWarning: invalid escape sequence '\/'
return js.replace('</script>', '<\/script>')
/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/third_party/catapult/common/py_vulcanize/py_vulcanize/parse_html_deps.py:302: SyntaxWarning: invalid escape sequence '\/'
raise Exception('Escape script tags with <\/script>')
Traceback (most recent call last):
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/third_party/catapult/common/py_vulcanize/py_vulcanize/html_module.py", line 28, in Parse
parser_results = parse_html_deps.HTMLModuleParser().Parse(self.contents)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/third_party/catapult/common/py_vulcanize/py_vulcanize/parse_html_deps.py", line 304, in Parse
return HTMLModuleParserResults(html)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/third_party/catapult/common/py_vulcanize/py_vulcanize/parse_html_deps.py", line 170, in __init__
self._soup = bs4.BeautifulSoup(html, 'html5lib')
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/third_party/catapult/third_party/beautifulsoup4-4.9.3/py3k/bs4/__init__.py", line 243, in __init__
raise FeatureNotFound(
bs4.FeatureNotFound: Couldn't find a tree builder with the features you requested: html5lib. Do you need to install a parser library?
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/core/release/../../3rdparty/chromium/third_party/catapult/tracing/bin/generate_about_tracing_contents", line 14, in <module>
sys.exit(generate_about_tracing_contents.Main(sys.argv[1:]))
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/third_party/catapult/tracing/tracing_build/generate_about_tracing_contents.py", line 32, in Main
load_sequence = vulcanizer.CalcLoadSequenceForModuleNames(names)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/third_party/catapult/common/py_vulcanize/py_vulcanize/project.py", line 146, in CalcLoadSequenceForModuleNames
modules = [self.loader.LoadModule(module_name=name,
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/third_party/catapult/common/py_vulcanize/py_vulcanize/resource_loader.py", line 149, in LoadModule
m.Parse(excluded_scripts)
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/third_party/catapult/common/py_vulcanize/py_vulcanize/html_module.py", line 30, in Parse
raise Exception('While parsing %s: %s' % (self.name, str(ex)))
Exception: While parsing tracing.ui.extras.about_tracing.about_tracing: Couldn't find a tree builder with the features you requested: html5lib. Do you need to install a parser library?
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Backport an upstream Chromium patch that fixes:
FAILED: gen/services/metrics/public/cpp/ukm_builders.cc gen/services/metrics/public/cpp/ukm_builders.h gen/services/metrics/public/cpp/ukm_decode.cc gen/services/metrics/public/cpp/ukm_decode.h
/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/host-bin/python ../../3rdparty/chromium/tools/metrics/ukm/gen_builders.py --input ../../3rdparty/chromium/tools/metrics/ukm/ukm.xml --output gen/services/metrics/public/cpp
/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/tools/metrics/ukm/../common/models.py:247: SyntaxWarning: invalid escape sequence '\w'
"""A complex node type that has attributes or other nodes as children.
Traceback (most recent call last):
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/core/release/../../3rdparty/chromium/tools/metrics/ukm/gen_builders.py", line 59, in <module>
sys.exit(main(sys.argv))
^^^^^^^^^^^^^^
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/core/release/../../3rdparty/chromium/tools/metrics/ukm/gen_builders.py", line 27, in main
data = ReadFilteredData(args.input)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/core/release/../../3rdparty/chromium/tools/metrics/ukm/gen_builders.py", line 48, in ReadFilteredData
data = ukm_model.UKM_XML_TYPE.Parse(ukm_file.read())
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/tools/metrics/ukm/../common/models.py", line 439, in Parse
return self._ParseMinidom(input_file)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/tools/metrics/ukm/../common/models.py", line 418, in _ParseMinidom
return self.root_type.Unmarshall(root)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/tools/metrics/ukm/../common/models.py", line 324, in Unmarshall
child.node_type.Unmarshall(n) for n in nodes]
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/tools/metrics/ukm/../common/models.py", line 302, in Unmarshall
if not re.match(attr_re, attr_val):
^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/thomas/buildroot/buildroot/output/host/lib/python3.12/re/__init__.py", line 167, in match
return _compile(pattern, flags).match(string)
^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/thomas/buildroot/buildroot/output/host/lib/python3.12/re/__init__.py", line 307, in _compile
p = _compiler.compile(pattern, flags)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/thomas/buildroot/buildroot/output/host/lib/python3.12/re/_compiler.py", line 745, in compile
p = _parser.parse(p, flags)
^^^^^^^^^^^^^^^^^^^^^^^
File "/home/thomas/buildroot/buildroot/output/host/lib/python3.12/re/_parser.py", line 979, in parse
p = _parse_sub(source, state, flags & SRE_FLAG_VERBOSE, 0)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/thomas/buildroot/buildroot/output/host/lib/python3.12/re/_parser.py", line 460, in _parse_sub
itemsappend(_parse(source, state, verbose, nested + 1,
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/thomas/buildroot/buildroot/output/host/lib/python3.12/re/_parser.py", line 840, in _parse
raise source.error('global flags not at the start '
re.error: global flags not at the start of the expression at position 1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Two Python scripts from the upstream Chromium code base uselessly
imported the "imp" module, causing the build to fail with Python
3.12. This commit backports an upstream patch that fixes this issue.
Traceback (most recent call last):
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/core/release/../../3rdparty/chromium/mojo/public/tools/mojom/mojom_parser.py", line 23, in <module>
from mojom.generate import translate
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/mojo/public/tools/mojom/mojom/generate/translate.py", line 17, in <module>
from mojom.generate import generator
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/mojo/public/tools/mojom/mojom/generate/generator.py", line 12, in <module>
from mojom import fileutil
File "/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.14/src/3rdparty/chromium/mojo/public/tools/mojom/mojom/fileutil.py", line 6, in <module>
import imp
ModuleNotFoundError: No module named 'imp'
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When using the default value "." for of ArchData, qt6-applications that require QML2 imports or
plugins, will not run:
In my case the wayland-egl platform plugin is not found:
qt.qpa.plugin: Could not find the Qt platform plugin "wayland-egl" in ""
And I also get a lot of qml related warnings:
qrc:/qml/main.qml:3:1: module "QtQuick.Layouts" is not installed
Prior to this fix, we had to set the QML2_IMPORT_PATH and QT_PLUGIN_PATH or make sure qt.conf is
available.
After this fix, ArchData starts with "lib", which is necessary (according to my own experiments)
for qt6-applications to find plugins and qml2 imports. The root cause is still unknown, but I
think the current solution is sufficient.
Setting ArchData to "lib/qt6" is also a good first step towards a better qt6 filesystem layout.
I will continue improving the qt6 filesystem layout in a later patch.
Signed-off-by: Roy Kollen Svendsen <roykollensvendsen@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
GCC14 will give errors for missing function declarations and
missing return types :
dhry_1.c:75:1: error: return type defaults to ‘int’ [-Wimplicit-int]
75 | main(int argc, char *argv[])
| ^~~~
dhry_1.c: In function ‘main’:
dhry_1.c:159:5: error: implicit declaration of function ‘Proc_5’ [-Wimplicit-function-declaration]
159 | Proc_5();
| ^~~~~~
Fixes:
http://autobuild.buildroot.net/results/8e65ba30efd5a6bca197f24ced2db1f8226b2c51/
Signed-off-by: Steffen Persvold <spersvold@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
dhrystone is basically a dead project, so there is no Git repo
available anywhere, no new release, nothing.
Despite that, let's reformat the patches with "git format-patch", keep
the original authorship but add my SoB since I'm reintroducing the
patches, and indicate the Upstream: status.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This .gitignore file ignores all files in an output directory and
hence doesn't change the git status.
Remove "/output" entry from the main .gitignore file as it is already
handled by this general approach.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
DBus 1.14.x now has the Containers1 interface which uses path in
runstatedir (by default set to /var/run) for creating sockets. With the
default, Systemd complains about it being a legacy directory:
systemd-tmpfiles[102]: /usr/lib/tmpfiles.d/dbus.conf:13: Line references
path below legacy directory /var/run/, updating /var/run/dbus/containers
→ /run/dbus/containers; please update the tmpfiles.d/ drop-in file
accordingly.
Set the configure option runstatedir to /run to use the preferred path
to avoid the warning and use the /run directory consistently. Setting
the value only affects the path of these sockets and to the PID file,
which is already explicitly set by another option.
We already tried to set the --runstatedir option globally, but that
confuses older autotools, so in the end it got reverted in
c8af4eef49.
Signed-off-by: Jan Čermák <sairon@sairon.cz>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The init script will be installed only if no other package provides
ifplugd (currently that could be package/ifplugd). Users can configure
the interface(s) which ifplugd should watch either using
/etc/default/ifplugd (for one interface) or using per-interface
symlinks to the script in /etc/init.d (for any number of
interfaces). The action script that ifplugd runs when a link change is
detected must be supplied separately.
Signed-off-by: Fiona Klute <fiona.klute+wiwa@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The init script will be installed only if no other package provides
cron (currently that could be package/dcron).
Our current default location for crontabs was the Busybox default of
/var/spool/cron/, but /var/spool is stored on tmpfs. This isn't
convenient as crontabs should normally be persistent, so we change
this default to /etc/cron, which is much more sensible. We also create
it to make sure to create this directory.
Signed-off-by: Fiona Klute <fiona.klute+wiwa@gmx.de>
[Thomas:
- Change default location of crontab
- Rework init script according to the latest coding style rules]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Moved BR2_PACKAGE_CAIRO_{SCRIPT,PS,PDF,XML} to Config.in.legacy
since they are not selectable anymore in the meson-build options.
BR2_PACKAGE_CAIRO_ZLIB serves for all of them now.
- Moved BR2_PACKAGE_CAIRO_SVG to Config.in.legacy since the PNG
option already selects that one. This is now in sync with the
meson build options.
- Note that the dependencies for the various options are slightly changed,
but there is not much mentioned about that, the meson introduction is done
in one big commit: [1].
- Added xlib_libXrender dependency, which was optional when using
autotools (--enable-xlib-xrender), but became mandatory when using
meson [2].
- Added two patches to fix cross compiling, upstream: [3]
[1]: https://gitlab.freedesktop.org/cairo/cairo/-/commit/596a82f2d185b101bd74645492821fe2f9e0daa0
[2]: https://gitlab.freedesktop.org/cairo/cairo/-/blame/1.17.4/meson.build#L277
[3]: https://gitlab.freedesktop.org/cairo/cairo/-/merge_requests/534
Signed-off-by: Thomas Devoogdt <thomas@devoogdt.com>
[Arnout: edit patch 0005 so it applies with fuzz 0]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Add a board config to support the am62ax-sk reference board for TI's
AM62Ax SoC family.
Signed-off-by: Bryan Brattlof <bb@ti.com>
Tested-by: Paresh Bhagat <p-bhagat@ti.com>
[Romain:
- add Upstream: tag in the kernel patch
- use BR2_TARGET_OPTEE_OS_PLATFORM="k3-am62ax"
]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
- fix alphabetical ordering
- put one module per line
- add comment explaining why options are enabled
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Lots of people are using broken text editors that 1. do not naturally
terminate text files with a final \n as is customary in UNIX text files,
and 2. do not respect our .editorconfig settings, which explicitly
require adding that final newline. See this nice summary of what a text
file is (with references to applicable standards):
https://stackoverflow.com/questions/12916352/shell-script-read-missing-last-line/12916758#12916758
So, it is not surprising that read does not read the last "line" of a
file, when said "line" does not end with a newline, because it is thus
not really a line.
Even though we do mandate actual text files, let's be a little bit lax
in this respect, because people may write packages, and their hash
files, in a br2-external tree, and they may not have our .editorconfig
in the directory heierarchy (e.g. if buildroot is a submodule of their
br2-external tree, or whatever).
mapfile does not suffer from this limitation, though, and correctly
reads all lines from a file, even the final line-that-is-not-a-line.
mapfile was introduced in bash 4.0, released on 2009-01-20, more than
15 years ago. Debian squeeze, released in 2011 already had bash 4.1.
Those are really ancient. So, it means we can indeed expect bash
version 4.0 or later; which means mapfile is available.
"It should be fine!"
Fixes: #15976
Reported-by: masonwardle@gmail.com
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Teach the generic package handling code how to extract zstd (.tar.zst)
archives. When zstd is not installed on the host, host-zstd gets built
automatically.
Signed-off-by: Matt Staveley-Taylor <matt.stav.taylor@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
According to https://spdx.org/licenses/, the correct license code for
the "Clarified Artistic License" is ClArtistic.
The only other package in Buildroot containing code under this license
is google-breakpad, and it is already using the ClArtistic SPDX code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
`b4` is a commandline tool to make patch-based development easier[1]. It
is primarily used for Linux kernel development, but can be configured to
support any project that has a public-inbox endpoint. Buildroot has a
public-inbox mirror at "https://lore.kernel.org/buildroot/".
We configure some basic settings that tell `b4` where to send patches
and how to use get-developers.
[1] https://b4.docs.kernel.org/en/latest/
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The defconfig fails in uboot build, with output:
In file included from tools/imagetool.c:10:
include/image.h:1178:12: fatal error: openssl/evp.h: No such file or directory
1178 | # include <openssl/evp.h>
| ^~~~~~~~~~~~~~~
This commit fixes the issue by adding
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y to the defconfig.
Fixes: 0e1b6ab700
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Also needs a host version to be able to generate the binary config file.
The host version is user-selectable so the user has the option of
running the compiler in a post-build script some other way.
We don't install the config file compiler tipidee-config on target.
Signed-off-by: J. Neuschäfer <j.neuschaefer@gmx.net>
[Arnout:
- Remove BR2_PACKAGE_TIPIDEE_CONFIGURATION, use empty value of
BR2_PACKAGE_TIPIDEE_CONFIG_FILE to flag false.
- Rename BR2_PACKAGE_TIPIDEE_CONFIGURATION_FILE to
BR2_PACKAGE_TIPIDEE_CONFIG_FILE.
- Default BR2_PACKAGE_TIPIDEE_CONFIG_FILE to empty.
- Fix spelling of BR2_PACKAGE_HOST_TIPIDEE.
- Add J. to DEVELOPERS.
- Install in /usr instead of /.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The COPYING hash changed because the copyright year was updated.
Signed-off-by: J. Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The COPYING hash changed because the copyright year was updated.
Signed-off-by: J. Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The COPYING hash changed because the copyright year was updated.
Signed-off-by: J. Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The current implementation of buildroot depe dependency graphing
either does forward- or reverse-dependency traversal.
This patch enables buildroot to graph forward and reverse dependencies
on the graph for the same package: (Diagram Credit: Yann E. MORIN)
$ make pkg-d-graph-both-depends
pkg A -. .-> pkg E
\ /
pkg B ----> pkg D ----> pkg F
/ \
pkg C -' '-> pkg G
In the above example a single graph shows pkg {A,B,C} are needed
by pkg D, and pkg D is a dependency of pkg {E,F,G}.
Makefile help and manual are also updated.
Signed-off-by: Steve Hay <me@stevenhay.com>
[Arnout:
- remove DEPTH and RDEPTH, their functionality is already covered by
BR2_GRAPH_DEPS_OPTS;
- remove --rdepth, it was felt to not add sufficient added value;
- add the new target to the manual;
- fix flake8 errors.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Instead of having done_deps as a global variable, pass it as an argument
to the print_pkg_deps function. This will allow the recursive search to
be started multiple times.
Signed-off-by: Steve Hay <me@stevenhay.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Bump Linux to 6.6 and U-Boot to 2024.01.
Signed-off-by: Jan Kraval <jan.kraval@gmail.com>
[Romain:
- enable BR2_DOWNLOAD_FORCE_CHECK_HASHES and add hashes files
]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Switch to extlinux instead of U-Boot boot script. Drop custom
boot script and genimage config. Instead use common orangepi
files from board/orangepi/common.
Signed-off-by: Jan Kraval <jan.kraval@gmail.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
This patch switches the board support of the Radxa Rock 5B from
using a custom kernel to mainline linux 6.7.4. Thereby patches,
which became redundant, are removed, as well as device tree
modifications and no longer needed hash files. The needed ethernet
drivers are activated via the kernel config fragment file. Also the
board support is switched from using a uboot script and a uEnv file
to using extlinux.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
This brings the NetworkManager init script in line with the standard
Buildroot init script pattern, including the script name.
Reload using SIGHUP is also supported now, note that the
NetworkManager documentation cautions that not all parameters can be
changed at runtime (without a full restart).
Signed-off-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* Use long options for start-stop-daemon
* Avoid --quiet, except for reload where the "stopping" message could
be confusing
Signed-off-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The manual describes package/busybox/S01syslogd as the reference of
how an init script should be written. Include it from source instead
of having a copy in the manual to ensure actual code and manual stay
in sync.
Also use long options in the paragraph after the script to follow the
same style.
Signed-off-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The manual refers to this script as a reference of how init scripts
should be written. The changes are:
* Use long form options for start-stop-daemon for clarity
* Use --exec on stop to ensure the right process gets stopped
* Avoid --quiet for clearer messages on failure
* Wait for the process to be gone during stop
* Avoid fixed wait between start and stop on restart
Signed-off-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
People can assume that e.g. Busybox options enabled in the package are
enabled when writing code for Buildroot. Anyone who uses custom
configurations that disable default options needs to make sure
relevant scripts etc. still work for themselves.
Signed-off-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While applying, the package was renamed from libchicken to chicken, but
two references remained: in DEVELOPERS, and in the Config.in help text.
Fix both.
While we're at it, extend the help text by copying the first sentence of
the website.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Add Kmon, a Rust-based, text-UI tool for managing Linux kernel
modules and monitoring kernel activities, providing a single
interface for various tools like dmesg and kmod.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently everything is installed to target. There is also a possibility
to build a cross-compiler for the host, but that's for future work.
Currently also more is installed to the target than strictly necessary
for the interpreter to work.
Signed-off-by: Woodrow Douglass <wdouglass@carnegierobotics.com>
[Arnout:
- Rename to "chicken" instead of "libchicken".
- Fix alphabetical ordering in package/Config.in.
- Fix check-package warnings.
- Drop BR2_CHICKEN_INSTALL_INTERPRETER, always install everything to
target.
- Set ARCH=unused otherwise autodiscovery is triggered.
- Drop '-feature' argument, it is only used for external code and we
can't know what kind of "feature" values that that code expects.
- Make staging and target install identical.
- _MAKE_ARGUMENTS -> _MAKE_OPTS.
- Move DESTDIR to install commands only.
- Use MAKE1 only when installing and don't add variable for it.
- Add hash file.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Now that the configurations of boards stm32mp157a-dk1 and stm32mp157c-dk2
have the same software versions, it is possible to share the hash files as
well.
The patch uses the hash files for Arm Trusted Firmware, Linux, Linux
headers and U-Boot of stm32mp175a_dk1 also for stm32mp175c_dk2, and then
enables BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we can now drop the
defconfig from .checkpackageignore.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This fixes commit 51b4421758 (configs/raspberrypi*: bump kernel version
to 17f135b (6.6.28)).
Fixes:
make[3]: *** No rule to make target 'arch/arm/boot/dts/bcm2710-rpi-3-b.dtb'. Stop.
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a defconfig to build an AArch64 U-Boot based firmware implementing
the subset of UEFI defined by EBBR[1], as well as a Linux OS disk image
booting with UEFI, to run on the Arm A-Profile Base RevC AEM FVP.
The generated firmware binaries can also be used to run another OS
supporting the EBBR specification.
[1]: https://github.com/ARM-software/ebbr
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commits b919d852e2 and
d991d0a3172c8716642f80d607f70b761186c9e6 recently bumped
prelink-cross, but this causes a build breakage in
gobject-introspection, because host-prelink-cross no longer
builds/install the prelink-rtld issue.
While the investigation is on-going, let's revert back to the previous
version of prelink-cross, which is known to work.
We however keep the patch from James, which has been accepted
upstream, and fixes a separate build issue.
Fixes:
/home/autobuild/autobuild/instance-8/output-1/host/or1k-buildroot-linux-gnu/sysroot/usr/bin/g-ir-scanner-lddwrapper: line 3: /home/autobuild/autobuild/instance-8/output-1/host/sbin/prelink-rtld: No such file or directory
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Root makefile imposes 'umask 0022', and this may be more restrictive than the
user's original umask - which could have provisions set to share files/dirs
with other users.
As an example, the imposed value makes the per-package download directories not
writeable for the group, but just for the owner - the user that issued the first
build that populated the per-package dl dir for the first time (say user A).
Thus, if a BR package changes its version (e.g. for buildroot update), and
another user (say user B, in the same group of A) starts a build, BR fails the
creation of package-xxx.tar.gz inside the dl dir, because user B has no write
permissions on that path. Furthermore, in the case of the git backend, this
makes the git cache not updatable by a different user. This is disruptive for a
host used by many users, all belonging to a certain group.
So, to allow sharing of a rw BR2_DL_DIR location among users, we save the
original umask value and restore it during the download process.
Signed-off-by: Luca Pesce <luca.pesce@vimar.com>
[Arnout:
- CURR_UMASK -> CUR_UMASK.
- BR2_ORIG_UMASK -> BR_ORIG_UMASK.
- Don't check if the umask is more permissive, apply it regardless. If
the user explicitly doesn't want to make their DL_DIR readable by
others, that's fine.
- Don't export BR_ORIG_UMASK.
- Only set BR_ORIG_UMASK if it we recurse, and only set umask if
BR_ORIG_UMASK is set.
- Add DOWNLOAD_SET_UMASK to simplify the latter.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Since we copied a piece from code from pexpect, we need to also follow
the license of pexpect. Effectively, that makes the file licensed under
both our default GPL-2.0 and pexpect's ISC license. This is already
hinted at in the comment inside _repl_sh_child, but let's make it
explicit by adding a license header to the file.
Ideally, of course, each file in Buildroot would have a license file.
This was done with the reuse tool:
reuse annotate -l GPL-2.0 -l ISC support/testing/infra/emulator.py
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The qemu.run() method can break when a command happens to output the
string "# " to stdout. This is because qemu.run() detects when a command
has completed by searching for the shell prompt, which by default is
"# ". It then captures everything before the "# " as the commands
output, causing the rest of output to be lost.
Instead use the pexpect libraries REPLWrapper to handle running
commands. It has hooks to set a custom prompt and avoid some other
pitfalls of wrapping a shell.
We unfortunately can't reuse replwrap._repl_sh directly, because it
tries to spawn a command while we already have a qemu started. So we
need to copy that code into _repl_sh_child. While we're at it, also
define our own prompt strings.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
[Arnout:
- Make all arguments to _repl_sh_spawn non-optional.
- Move non_printable_insert to a local variable instead of an argument,
we don't need to override it.
- Copy the comment from _repl_sh that explains why non_printable_insert
is needed.
- Add a comment about timeouts.
- Rename spawn to child (we don't actually spawn anything so this felt
more natural, even though the class
- Use single quotes instead of triple quotes, and explicitly escape the
nested quotes.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The current phrasing is not entirely clear: one could read it as if
Buildroot will detect if there's an update available in one of the
dependencies, which is quite the reverse of what we do. Rephrase the
sentence in a way that hopefully makes it clearer that we're just making
a hash of the dependencies.
While we're at it, also extend the sentence about offline builds a
little.
Suggested-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Now we have the post-process options, we can use them to pass the
manifest path instead of passing it through an environment variable.
For now, we support both. The environment variable approach will be
removed again later.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Currently, we have no explicit, dedicated way to pass information to the
download post-process scripts, even though we do already need to pass
the path to the manifest when it is not the default, which we do with an
environment variable.
We'll soon need to be able to pass additional information to
post-process scripts, like instructing cargo to not use a lock file when
the package is not locked.
Extend the dl-wrapper with a new option with an argument, where the
argument will be passed as-is to the post-process script.
We explicitly do not document this new variable, as it is expected to
only be used in our package infrastructures (although there is currently
exactly one package that will directly need it, and we hope to drop that
in the future).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
We do have a few shell scripts that have source directives (either with
'source' or with '.'), and they all are currently either globally
ignored in .checkpackageignore, or have shellcheck directives to ignore
the source statement (SC1090).
So, we can safely instruct shellcheck where to lookup for sourced files;
that does not trigger any new error.
This will alow fixing some shellcheck errors in later commits.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@datacom.com.br>
[Arnout: use long option]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Currently, how to run the check-package test-suite is thoroughly under-
documented. There is one hint in the commit log for commit fc254881e6
(utils/checkpackagelib: add unit tests), and another in commit
242e9d72e7 (utils/docker-run: new script); the former is hard to find,
and the latter is about an unrelated script, so harder yet to find...
Add a new option to check-package, that will make it run its test-suite.
Since pytest is only needed for the test-suite, only import it in that
case.
pytest will be default create a cache of the tests (not sure what it is
about, though), so instruct it not to (esp. since the tree can be
read-only).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@datacom.com.br>
[Arnout: move the code into checkpackagelib.base]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The DOWNLOAD macro is always called in package context, so the PKG
variable is always set, and thus we do not need to pass the package
as a parameter.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
User may get confused when they see the current hint, and take that as
the proper replacement, while we're only reporting the stem of the
variable name:
.../foo.mk:16: possible typo: BLA -> *FOO*
There is usually no easy way to actually suggest the proper variable
name, though, so let's make it a little bit more obvious that we meant
the variable was improperly prefixed:
.../foo.mk:16: possible typo, variable not properly prefixed: BLA -> *FOO_XXX*
And while at it, throw in the URL to the corresponding manual entry.
Adapt the test accordingly.
Reported-by: "Frager, Neal" <neal.frager@amd.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@datacom.com.br>
Reviewed-by: Neal Frager <neal.frager@amd.com>
[Arnout: also update new test, scoped -> prefixed]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Currently, when a package defines an unprefixed variable, but its value
contains a properly prefixed expansion (or even just the name of a
variable), there is not error reported (e.g. with the recently fixed
composer issue):
BASE_SITE = https://getcomposer.org/download/$(COMPOSER_VERSION)/composer.phar
The reason is that he check is done on the whole line, rather than on
the variable that is being set.
We fix that by really looking at the variable we found, instead of
looking in the whole line.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@datacom.com.br>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
BSH SMM M2 (SystemMaster M2) Board is an add-on board which provides
input and output interfaces to a dedicated carrier board. It is designed
mainly to provide graphical/video and connectivity interfaces to the
appliance.
Board support package includes the following components:
- mainline Linux kernel 6.1.68
- mainline U-Boot 2023.10
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Romain:
- enable BR2_DOWNLOAD_FORCE_CHECK_HASHES and add hashes files
- enable BR2_KERNEL_HEADERS_AS_KERNEL for linux-headers to avoid specify
BR2_KERNEL_HEADERS_6_1
- make sure to use uuu from HOST_DIR in flash.sh
]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
This reverts (partial) commit
e39ad96136, and
26642e4cc0, but also fixed additional
sites where the !BR2_RISCV_32 dependency is no longer needed, thanks
to the recently added
0001-src-xshmfence_futex.h-fix-build-on-32-bit-architectu.patch in
xlib_libxshmfence.
Signed-off-by: Thomas Devoogdt <thomas@devoogdt.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As more and more packages are required to build the host ccache package
and therefore they has to be filtered out for ccache dependency the list
growed up.
By adding the variable <PKG>_ADD_CCACHE_DEPENDENCY with the default
value to 'yes' we can remove that dependency for each package that is
needed by ccache by setting the value to 'no'. This can be done in the
package makefile instead of tracking the list in the core pkg-generic.mk file.
This behavior is similar to the skeleton and toolchain dependency.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[Arnout: move the BR2_CCACHE condition to the dependency itself]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
https://ccache.dev/releasenotes.html#_ccache_4_10_1
This version requires use the system dependencies of host-blake3 and
host-xxhash. The bundled version is not able to build/download.
The ZSTD_FROM_INTERNET and HIREDIS_FROM_INTERNET variables are replaced
in the ccache build system with DEP_ZSTD and DEP_HIREDIS in version 4.10.
For the sake of completeness, all DEP_<xxx> variables were set for external
dependencies.
The generation of documentation has also been switched off.
The LICENSE.adoc was updated regarding the bundled libraries version used
like cpp-httplib, BLAKE3, fmt, nonstd-span, cxxurl.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This package is used and required for ccache update.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
There was an error in the pkg-cmake infra file regarding the selection
of the ASM compiler. Now that this has been fixed, overwriting the
ASM compiler selection is no longer necessary.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
CMAKE_ASM_COMPILER is supposed to point to a compiler wrapper (i.e.
gcc), _not_ to as directly. If it is not set, it will use the value of
CMAKE_C_COMPILER. That's exactly what we want, so there is no need to
set CMAKE_ASM_COMPILER at all.
For target, we don't set CMAKE_ASM_COMPILER either.
Setting CMAKE_ASM_COMPILER leads to build failures for any package that
actually tries to build .S files for the host - like llvm. This is why
llvm has an override for it.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The python-pymupdf and mupdf packages do not follow the exact same
version numbers anymore. There is no specific mention of version
compatibilities in the upstream package, so update our comment to just
say that both should be "compatible" (to try to avoid one being
updated without the other).
The hardcoded paths we used to remove from setup.py are no longer
present, so the post-patch hook is removed. The new setup.py instead
uses new environment variables which we now provide.
This new python-pymupdf version fails at runtime when mupdf builds
static libraries.
Note also that python-pymupdf is gradually switching to a new
implementation that requires mupdf to be built with python
bindings. For now, both implementations are still available but we
only compile the old one. The runtime test is adapted accordingly as
the legacy implementation has to be imported with "fitz_old".
While at it, the dependencies are also split to one per line to make
them easier to diff in the future.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Raphaël:
- fix cross-compilation
- remove unneeded dependencies
- update to 1.23.22
- update the commit message
]
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To give us a chance to catch runtime issues (such as missing
dependencies) more easily, add a test that writes a sample PDF file,
read it back and verify the text that was read.
Like similar packages that lead to a big
rootfs (e.g. python-botocore), this test requires a separate ext2
rootfs to avoid filling the default amount of RAM available
entirely (which would cause missing files from the root filesystem and
in turn, test failures).
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that the mandatory dependency of MuPDF on X.org, we can also drop
this dependency from python-pymupdf.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It turns out that python-pymupdf doesn't require zlib directly, but it
does require the zlib python module.
This fixes the following runtime error:
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python3.11/site-packages/fitz/__init__.py", line 22, in <module>
File "/usr/lib/python3.11/site-packages/fitz/fitz.py", line 3402, in <module>
File "/usr/lib/python3.11/gzip.py", line 9, in <module>
ModuleNotFoundError: No module named 'zlib'
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The X11 support in mupdf is actually optional, and it does require
libXext in addition to libX11, so adjust the packaging accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that MUPDF_CFLAGS and MUPDF_LDFLAGS are just TARGET_CFLAGS and
TARGET_LDFLAGS, drop them.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
By default mupdf generates static libraries, shared libraries must be
enabled explicitely.
Also, when building shared libraries, mupdf's Makefile properly passes
-fPIC, so adding it manually to MUPDF_CFLAGS is not needed.
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This variable might have been needed in the very distant past to help
mupdf find libraries, but mupdf's Makefile now properly uses
pkg-config to find the 5 libraries freetype2, gumbo, harfbuzz, libjpeg
and zlib, so our code has become redundant: drop it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The xilinx-prebuilt package only supports development boards that Xilinx
has published firmware for. Custom designs based on the Xilinx platform
must generate their own firmware using the AMD Vivado Design Suite.
Vivado produces an XSA file, which is a Zip file containing all the
firmware needed by xilinx-prebuilt. We extend xilinx-prebuilt to
download custom XSA files and extract their contents.
Reviewed-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
[Romain: add a comment about the custom PSMFW file name.]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
This update requires:
- Changing the path to the Amlogic Bluetooth, as reported by Yang Li
<yang.li@amlogic.com>
- Updating the hash of LICENCE.ti-connectivity due to the following
change:
-Copyright (c) 2016 Texas Instruments Incorporated
+Copyright (c) 2016-2024 Texas Instruments Incorporated
- Updating the hash of LICENSE.amdgpu due to the following change:
-Copyright (C) 2023 Advanced Micro Devices, Inc. All rights reserved.
+Copyright (C) 2024 Advanced Micro Devices, Inc. All rights reserved.
- Updating the hash of the WHENCE file, due to firmware additions and
firmware changes, but no changes to the redistribution/licensing
conditions
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit
94d4ab11fe ("package/linux-firmware: add
option to install ARM Mali CSF firmwares") added support for
installing the Mali CSF firmware files, but forgot to add the hash of
the license file used by those firmware files. This commit fixes this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This reverts commit 179dd69969.
This commit was merged while Buildroot was still using linux-firmware
20240410, which did not contain the path change for the Amlogic
Bluetooth firmware files.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The build of gcc with Fortran support is broken on gcc 12.x and gcc
13.x, it fails with:
../../../libgfortran/generated/bessel_r8.c: In function 'bessel_yn_r8':
../../../libgfortran/generated/bessel_r8.c:178:1: internal compiler error: in gen_reg_rtx, at emit-rtl.cc:1167
This issue has been fixed in gcc 14.x, which builds a Microblaze
Fortran-capable toolchain successfully.
Since we're not really interested in figuring out the commit that
fixed the problem, let's simply disallow the selection of Fortran with
gcc12/13 on Microblaze.
Fixes:
http://autobuild.buildroot.net/results/5b4eee1d9b119c9f923f9518618f45a6482ddc85/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
In commit 809fdb3a7a ("package/gdb:
remove gdb 10.x") and
030497be18 ("package/gdb: remove support
for GDB 11.x"), we forgot to drop the no longer needed hashes from
gdb.hash. Let's do this now.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Now that GDB 15.x has been introduced, GDB 14.x made the default,
let's drop support for GDB 12.x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Now that we have introduced support for gdb 15.x, switch to gdb 14.x
as the default version.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Romain:
- select mpfr for the target variant
- remove comment about mpfr dependency
]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
As detailed in the release notes [1]:
Building GDB and GDBserver now requires a C++17 compiler (for
instance, GCC 9 or later).
Therefore, we make the option BR2_GDB_VERSION_15 depend on both
BR2_HOST_GCC_AT_LEAST_9 *and* BR2_TOOLCHAIN_GCC_AT_LEAST_9. One might
wonder why on both. It's because BR2_GDB_VERSION_15 defines both the
version of gdb used for the host *and* target, because we want them to
be in sync (to make sure our gdbserver is in sync with host-gdb).
The patches from gdb 14.1 are all ported to 15.1, with some minor
adaptation to 2 of them.
[1] https://lwn.net/Articles/981080/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The beaglev-secondboot was meant for the BeagleV-Starlight
board (beaglev_defconfig) but the support was removed.
Remove beaglev-secondboot too.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The beaglebone board files from beagleboard.org project should be
moved to board/beagleboard directory.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The beagleboneai board files from beagleboard.org project should be
moved to board/beagleboard directory.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libopenmpt is a cross-platform C++ and C library to decode
tracked music files (modules) into a raw PCM audio stream.
openmpt123 is a cross-platform command-line or terminal
based module file player.
https://lib.openmpt.org/libopenmpt
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
skopeo is a command line utility that performs various operations on
container images and image repositories.
We introduce it as a host-only package, as the expected usage is to
transform an OCI image into a docker image, or to help in uploading an
OCI image to a (local) docker daemon or to a docker registry, for
example, in a post-build script.
As such, it needs a prompt in the host packages section.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libassuan is needed by libgpgme, which is needed for skopeo
(to come in a followup patch);
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libgpg-error is needed by libassuan and libgpgme, the latter
being needed for skopeo (to come in a followup patch).
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Set CRACKLIB_AUTORECONF when building python to regenerate py-compile
and avoid the following build failure with python 3.12 (which removed
imp module) raised since commit
36e635d2d5:
Traceback (most recent call last):
File "<string>", line 2, in <module>
ModuleNotFoundError: No module named 'imp'
make[3]: *** [Makefile:485: install-pythonPYTHON] Error 1
Indeed, after autoreconf, py-compile will contain:
if test "$python_major" -le 2; then
import_lib=imp
import_test="hasattr(imp, 'get_tag')"
import_call=imp.cache_from_source
import_arg2=', False' # needed in one call and not the other
else
import_lib=importlib
import_test="hasattr(sys.implementation, 'cache_tag')"
import_call=importlib.util.cache_from_source
import_arg2=
fi
$PYTHON -c "
import sys, os, py_compile, $import_lib
instead of:
import sys, os, py_compile, imp
Fixes: 36e635d2d5
- http://autobuild.buildroot.org/results/aec4c19fdf8087c76c1d5f472e855e0f84fcf7fd
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit f7f2903f3e, the zstd package
was bumped to 1.5.6. Since then, the zstd has been failing to build in
our autobuilders, causing over 1400+ build failures.
The issue turned out to be a one character typo introduced in an
upstream commit. This commit fixes that by introducing a patch, which
has been submitted upstream.
Fixes:
http://autobuild.buildroot.net/results/df983da15a5918566c89a87038d0bdc6cb530485/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds a patch, which is already in Debian, fixing the build
with gcc 14.x:
/home/autobuild/autobuild/instance-7/output-1/build/host-cdrkit-1.1.11/genisoimage/genisoimage.c:1509:17: error: implicit declaration of function 'parse_checksum_algo' [-Wimplicit-function-declaration]
1509 | if (parse_checksum_algo(optarg, &checksum_algo_iso))
| ^~~~~~~~~~~~~~~~~~~
make[3]: *** [genisoimage/CMakeFiles/genisoimage.dir/build.make:76: genisoimage/CMakeFiles/genisoimage.dir/genisoimage.o] Error 1
Fixes:
http://autobuild.buildroot.net/results/a9cca8da22774ecafdbb382697aae71f78e348f4/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
cdrkit.org no longer works, and there is no obvious homepage for this
dead project. Use the Wikipedia page as a replacement.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
similar to previous problems with nios2 and not-available atomic ints
the build for Boost.Atomics also fails for ARC Targets which don't
have the ATOMICS_EXT flag set.
according to [0] "Boost.Atomic has a hard requirement of the native
atomic operations on bytes". The same tests mentioned there fail for
ARC without the atomic extension.
Disable BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS for BR2_arc
without BR2_ARC_ATOMIC_EXT.
Fixes:
http://autobuild.buildroot.net/results/4ca54a85672d7b9328b1909b457e548c6032a493
[0] https://github.com/boostorg/atomic/issues/42#issuecomment-734130348
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
[Arnout: add to BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS
instead of updating all packages]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Add support for the BeagleV Fire, the Beagleboard SBC powered by
Microchip's PolarFire SoC.
The configuration file is beaglev_fire_defconfig. It builds a
bootable kernel image with an embedded root file system. The image
built can be flashed to the board using the eMMC.
The yaml configuration file is used by the hss payload generator. It
maps the ELF binaries or binary blobs to the application hart.
The image generator script sets the partitions of the image.
The image tree souce file creates a FIT image.
The post image script creates the payload using the payload generator
host package and finally, creates the FIT image using the ITS after the
kernel build. It also creates the BMAP file for use with the BMAP
command line tool to transfer the image to the board.
The U-Boot script and additional U-Boot configurations ensure that
U-Boot behaves as expected for the BeagleV-Fire and boots the FIT image.
The rootfs-overlay contains script for updating the BeagleV-Fire
gateware.
The README.txt documents how to build and boot the Beagle-V Fire with
this configuration. It also explains how to program a custom bitstream.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
[Romain:
- move board files to board/beagleboard directory
- enable BR2_DOWNLOAD_FORCE_CHECK_HASHES and add hashes files
- enable BR2_KERNEL_HEADERS_AS_KERNEL for linux-headers to avoid specify
BR2_DEFAULT_KERNEL_VERSION
- add BR2_PACKAGE_HOST_DOSFSTOOLS for mkdosfs (host variant)
]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The build logic in source/cmake/FindNeon.cmake caused the x265 build
system to always think that the CPU supports neon: it was looking in
/proc/cpuinfo, which of course is wrong when cross-compilation, but
then the sequence of grep was interacting badly with CMake, causing
the build system to always conclude that the CPU supports NEON.
This causes runtime issues on ARMv6.
Setting -DCROSS_COMPILE_ARM=1 fixes this, as it tells the x265 build
system we are cross-compiling and it skips its bogus NEON check. So
for ARMv6, we pass -DCROSS_COMPILE_ARM=1.
But then, we still want NEON for ARMv7 processors with NEON, so this
commit adds a patch that allows to explicitly specify whether the CPU
supports NEON, in the -DCROSS_COMPILE_ARM=1 case, and we use this
option when BR2_ARM_CPU_HAS_NEON.
For those wondering why -DCROSS_COMPILE_ARM=1 is not passed for all
ARM platforms: it's because from the perspective of x265, only ARM >=
v6 is ARM: it has assembly code that needs at least ARMv6. Earlier ARM
platforms are not detected as ARM by the x265 build logic, and
therefore fallback on generic code.
This has been build-tested on:
- ARMv5: generic code is used, no assembly
- ARMv6: assembly code is used, but not with NEON support
- ARMv7 with NEON: assembly code is used, with NEON support
Reported-by: David Barbion <davidb@230ruedubac.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As we're about to do some other fixes in x265 ARM build, let's replace
the patch fixing gcc option by:
- A patch generated by git format-patch now that x265 upstream uses
Git
- Is re-submitted upstream
- Only drops the flags, and does not add bogus ARM architecture
aliases that don't exist in the CMake world.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The go stdlib "plugin" package relies on dlfcn.h which isn't available
when we have BR2_STATIC_LIBS=y.
Concentrate all cgo decision (including the existing threads part)
under the config option BR2_PACKAGE_HOST_GO_TARGET_CGO_LINKING_SUPPORTS
that has the proper depends.
This should fix this build error from autobuilders:
/buildroot/build/host-go-1.19.3/src/plugin/plugin_dlopen.go:11:10: fatal error: dlfcn.h: No such file or directory
11 | #include <dlfcn.h>
Fixes:
http://autobuild.buildroot.net/results/1f4/1f4b9882986b9df723a1446493d270c29287b505http://autobuild.buildroot.net/results/a9d/a9de62374c948f773634c694a47abcaa2bc266d0
Signed-off-by: Anisse Astier <anisse@astier.eu>
Reviewed-by: Christian Stewart <christian@paral.in>
[Arnout: revert parts to v2, keeping most of the overall logic as it
was]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Since wayland 1.15 (upstream commit
549a5ea710f4da1a5749587176d39fef1ded4077), libwayland-egl.so is
provided by the wayland package, so there is no longer a question of
whether libwayland-egl.so is provided by the particular EGL
implementation. See the Wayland commit log:
wayland-egl: import libwayland-egl.so frontend library from Mesa
Currently the client-facing libwayland-egl API is defined by a header
file shipped by Wayland, but the implementation is left to each vendor.
This can cause collisions when multiple implementations are installed on
the same system. Importing the implementation into Wayland with a stable
and versioned driver-facing ABI allows multiple drivers to coexist on
the same system.
Pull the sample implementation from Mesa commit 677edff5cfd
("wayland-egl: rework and simplify wl_egl_window initialization")
It has been used by the Mesa open source drivers, NVIDIA and others[1].
v2: Reword commit message, rebase on top of newer Mesa.
[1] https://github.com/thayama/wayland-egl
Consequently, we remove the BR2_PACKAGE_HAS_LIBEGL_WAYLAND
option. Packages that rely on BR2_PACKAGE_HAS_LIBGLES and
BR2_PACKAGE_WAYLAND are guaranteed to have libwayland-egl.so.
Note that this doesn't solve the problem that libwayland-egl.so will be
provided both by wayland itself and by by the implementation
(rockchip-mali, sunxi-mali-utgard, ...). Still, there is a dependency
from the implementation on wayland so at least it is predictable which
one will end up on the target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Arnout: remove remaining references in sway and sunxi-mali-utgard]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
buildx is a docker CLI plugin implementing extended build features.
buildx is the default builder as of Docker v23.x, and if the plugin is not
present, the CLI will output an error warning that it is using the deprecated
built-in builder instead of the buildx builder.
However, buildx is a separate repository from docker-cli: it is a plugin that
needs to be installed at /usr/lib/docker/cli-plugins on the target.
https://github.com/docker/buildx
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* Enabled LZMA compression for host build.
* Added option for LZMA support on target.
Signed-off-by: Jan Čermák <sairon@sairon.cz>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Post-build, post-image, and other build scripts may run some commands in
parallel, for example to parallelize xargs, Makefiles, etc. Export
PARALLEL_JOBS to these scripts so they can enforce the same job limits
that other Buildroot packages use.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Fix the following build failure raised since bump to version
1.4.2-168-ged3039c in commit 2e330dff6a:
/home/buildroot/autobuild/run/instance-1/output-1/host/lib/gcc/arm-buildroot-linux-musleabihf/12.3.0/../../../../arm-buildroot-linux-musleabihf/bin/ld: attempted static link of dynamic object `libfdt/libfdt-1.6.1.so'
Fixes:
- http://autobuild.buildroot.org/results/6788d86c10d551b3d617e33c85083b817eb5d0b2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
GNU Octave supports the --with-sndfile configure option since v4.0.0.
For reference, commit 40ea68b4b2 "package/octave: new package"
introduced the package at v7.1.0.
This commits adds this optional support.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump Linux kernel to v6.8.10.
The Devicetree has moved; update our config accordingly.
- Bump U-Boot to 2023.04.
This is the most recent version we can use as U-Boot 2023.07 dropped
support for the uevm.
OpenSSL is now required for the build.
The default boot method has changed; switch to booting with an extlinux
configuration to overcome this.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This allows uvw to be again in sync with the libuv package, following
the bump of libuv to v1.48 in commit
bd2f99246c ("package/libuv: security
bump to version 1.48")
The hash of the license file has changed due to a copyright year
update.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Though the petitboot UI is a user application, it is currently being
run by root only because we use getty to display it on the console.
Create an unprivileged user to run the UI instead. The unix socket the
pb-discover daemon sets up is accessible to "petitgroup", so that should
be the gid, with arbitrary uid "petituser" to match.
This is currently the chain of processes leading to the UI:
1. /etc/init.d/pb-console start console
2. /usr/libexec/petitboot/pb-console --getty --detach -- -n -i 0 console linux
3. /sbin/getty -l/usr/libexec/petitboot/pb-console -n -i 0 console linux
4. /usr/libexec/petitboot/pb-console
5. /usr/sbin/petitboot-nc
Instead of (3) running the pb-console helper directly with "getty -l",
we can use "agetty -a" to autologin petituser, and run pb-console via
petituser's login shell:
1. /etc/init.d/pb-console start console
2. /usr/libexec/petitboot/pb-console --getty=/sbin/agetty --detach -- -a petituser -n -i console linux
3. /sbin/agetty -a petituser -n -i console linux
4. /home/petituser/.profile
5. /usr/libexec/petitboot/pb-console
6. /usr/sbin/petiboot-nc
Here, everything from (4) down is running as petituser. In (4), use
$PPID to determine if we're logging in via getty, so that logging in by
other means will give a normal shell. Otherwise we would recurse when
trying to get a shell from the menu.
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
[Arnout: explicitly select util-linux, even though it comes indirectly
through other dependencies]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
When the user selects the shell escape option from the petitboot menu,
reset the terminal so output is raw rather than being confined to the
ncurses window set up for the petitboot menu, and print some helpful
text before running the shell.
To do this, override the default HOST_PROG_SH (/bin/sh) with a small
script. Doing so also enables someone to customize this behavior by
overlaying a different script.
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
It's good practice to unmount filesystems and gracefully terminate
running services before running "kexec -e". So when a boot option has
been chosen from the petitboot menu, poke init to shut the system down
and kexec the new kernel.
One benefit to us in particular is that when pb-console is killed, it
notifies the user that we're booting:
trap 'reset; echo "SIGTERM received, booting..."; sleep 2' SIGTERM
This terminal reset is also useful, exiting the ncurses visual mode so
subsequent boot output is raw rather than being confined to the window
set up for the petitboot menu.
Currently we assume busybox init (using the bb-kexec-reboot script
included with petitboot), but do not add an accompanying entry
in the inittab to run kexec, so things aren't working.
Add a new script kexec-restart that does the right thing for all init
systems that Buildroot supports (busybox, sysv, openrc, systemd). OpenRC
and systemd have an upstream way to do a kexec-shutdown. For busybox and
sysv, we add a line to inittab that does kexec -f -e (after the shutdown
scripts have run). Finally, for other cases (where there is no
recognized init system) directly use kexec -f -e.
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
[Arnout:
- install kexec-restart in /usr/libexec/petitboot, where it was before;
- determine init system statically based on config instead of dynamically.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Since the major release changed all the packages that have direct
dependency to harfbuzz have been succesfully built:
- efl
- libass
- mupdf
- pango
- qt5base
- qt5webengine
- qt6base
- sdl2_ttf
- supertuxkart
- vlc
- webkitgtk
- wpewebkit
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Make wpewebkit pick a value for the USE_AVIF option depending
on BR2_PACKAGE_LIBAVIF.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libavif is an implementation of the AV1F image format, which may be a
frontend for different encoders and decoders. At the moment only dav1d
is packaged so that is the one configured.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tig is an ncurses-based text-mode interface for git. It
functions mainly as a Git repository browser, but can also
assist in staging changes for commit at chunk level and act
as a pager for output from various Git commands.
https://jonas.github.io/tig/
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
mxt-app is a utility for managing Atmel maXTouch touch controllers
and other devices that support Atmel Object Based Protocol.
Signed-off-by: Saeed Kazemi <kazemi.ms@gmail.com>
[Arnout:
- drop BR2_PACKAGE_MXT_APP_DEBUG option, instead use
BR2_ENABLE_RUNTIME_DEBUG;
- also explicitly disable debug;
- add comment to explain AUTORECONF.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Upstream moved git repository.
The COPYING file has been dropped in favor of a LICENSES.txt file that
clarifies the licensing. We take this opportunity to update the
IMA_EVM_UTILS_LICENSE variable according to what LICENSES.txt
indicates.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit [1] introduced a new spike_riscv32_defconfig with Kernel
at v6.6.35.
This commit bumps the Kernel of spike_riscv64_defconfig to have it
aligned with its 32bit counterpart.
This commit also adds custom hashes. Therefore, it adds
BR2_DOWNLOAD_FORCE_CHECK_HASHES=y in the defconfig, adds a global
patch directory, and removes the entry in ".checkpackageignore".
Finally, to completely align with the spike_riscv32_defconfig, the
config directive BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM is moved by few
lines.
With this commit, the maintenance of the two spike_riscv{32,64}
defconfigs will be easier.
[1] https://gitlab.com/buildroot.org/buildroot/-/commit/a83ab3f4c8621dec58dc78a8dcb48e519377ac3d
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When build host has a many CPUs (more that 20) and GNU Make 4.4
(included for example in Fedora 40), fwts can randomly fail to build.
This commit adds a package patch to fix the issue.
Fixes:
mv: cannot stat 'dtcompilerparser.tab.c': No such file or directory
mv: cannot stat 'prparser.tab.c': No such file or directory
See also:
https://github.com/fwts/fwts/issues/7
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
These entries should not have been removed by commit
61d04a0a73 ("configs/imx8mpico: remove
defconfig").
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This reverts commit 77e945b003.
The static linking issue was fixed by commit
526b89b981 ("package/check: don't build
shared lib when disabled")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, mediastreamer fails to build with output:
Applying 0002-Use-AV_INPUT_BUFFER_PADDING_SIZE-to-determine-paddin.patch using patch:
patching file src/utils/ffmpeg-priv.h
Hunk #1 FAILED at 102.
1 out of 1 hunk FAILED -- saving rejects to file src/utils/ffmpeg-priv.h.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, xdriver_xf86-video-mach64 fails to build with output:
Applying 0001-cross-compile.patch using patch:
patching file configure.ac
Hunk #1 FAILED at 85.
1 out of 1 hunk FAILED -- saving rejects to file configure.ac.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, xdriver_xf86-video-tdfx fails to build with output:
Applying 0001-cross.patch using patch:
patching file configure.ac
Hunk #1 FAILED at 67.
1 out of 1 hunk FAILED -- saving rejects to file configure.ac.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, libsvgtiny fails to build with output:
Applying 0004-Build-Include-gperf-generated-code-directly.patch using patch:
patching file src/Makefile
Hunk #1 FAILED at 1.
1 out of 1 hunk FAILED -- saving rejects to file src/Makefile.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
This issue was introduced back in 2009 with commit
e11fe847b2 that created the generic
package infrastructure.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
When BR2_SHARED_LIBS=y (shared libraries only) and BR2_PIC_PIE=y
(Build code with PIC/PIE), the toolchain-wrapper will try to enable
position-independent code/executables. See [1]. This configuration
is a common default.
Xvisor was likely tested only with RISC-V gcc from [2], which will
not enable PIE by default. Since Xvisor is a Type 1 hypervisor, it
needs the same kind of special treatment as U-Boot or Kernel.
This commit adds a patch to explicitly force static linking and
disable PIE for RISC-V architecture.
[1] https://git.buildroot.org/buildroot/tree/toolchain/toolchain-wrapper.c?h=2023.05.1#n392
[2] https://github.com/riscv-collab/riscv-gnu-toolchain
Signed-off-by: Julien Olivain <ju.o@free.fr>
[Arnout: renumber patch]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit 8f88a644ed "support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0" reduced the fuzz factor.
Due to this change, rdesktop fails to build with output:
Applying 0001-8bit-colors.patch using patch:
patching file xwin.c
Hunk #1 succeeded at 1801 (offset 340 lines).
Hunk #2 FAILED at 1568.
1 out of 2 hunks FAILED -- saving rejects to file xwin.c.rej
This commit refreshes the package patches on the current package
version. The original patch was not generated with "git format-patch",
and had no information (no commit log, no author, no date, ...). Since
it was introduced in commit [1], the author and date is set to this
commit. The "Upstream:" tag is also added to the patch, mentioning
the upstream project is reported as unmaintained on its homepage (at
the time of this commit). Finally, the ".checkpackageignore" entry is
removed, since it is no longer needed.
[1] https://gitlab.com/buildroot.org/buildroot/-/commit/e2dde9c7cdc2f9ed851acfb7daa858ffa1744246
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, libglfw fails to build with output:
Applying 0002-src-CMakeLists.txt-allow-override-of-wayland-pkgdata.patch using patch:
patching file src/CMakeLists.txt
Hunk #1 FAILED at 75.
1 out of 1 hunk FAILED -- saving rejects to file src/CMakeLists.txt.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, udpcast fails to build with output:
Applying 0001-fix-musl-build.patch using patch:
patching file receivedata.c
Hunk #1 FAILED at 1.
1 out of 1 hunk FAILED -- saving rejects to file receivedata.c.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Integrate a patch, which was submitted upstream, to work-around an
issue with the SPARC kernel headers. The kernel headers have been
fixed in the upstream kernel (in the to-be-released 6.10 kernel), but
we need a workaround for the older toolchains, until we believe 6.10
is "old" enough to be able to drop the workaround.
Fixes:
http://autobuild.buildroot.net/results/272c464ed4f9392535fa3b7613218dbd03acf901/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Although the asciidoc toolchain accepts any number of ~ to delimit a
listing block (i.e. a code block), it is actually specified to be
exactly four, i.e. ~~~~. Currently, a mix of diffrent numbers of ~ are
being used - sometimes even a different number at the beginning and at
the end of the block.
Normalize this to always use exactly four ~ for the delimiter.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Currently the text for each package infra that mentions the usage of
variables already provided by the generic infra diverge from each other:
- some (golang, kconfig, python) add a cross-referece to the generic
infra chapter;
- kconfig does not list any example;
- some mention _LICENSE as an example, others don't;
- some (cargo, golang, python) add an 'etc.' at the end of the examples,
giving the idea that can be more symbols provided by the generic
infra than the ones listed;
- most have the text 'works by defining a number of variables before
calling the +<macro-name>+ macro', except golang and kconfig;
- some actually list 'A few additional variables' but keep using some
old reference as 'An additional variable';
- some say 'First, all the package metadata' and other only 'All the
package metadata';
- most mention _SUBDIR as an example of variable supported by the
generic infra, even the generic infra manual not mentioning it.
Improve the correctness for the manual by standardizing the text among
the package infras:
- use the same text "All the package metadata information variables that
exist in the generic package infrastructure also exist in the
<name> infrastructure:" for all of them;
- add the cross-reference for all of them;
- remove the examples of variables inherited from the generic infra -
this also solves the _SUBDIR problem, there no longer is any reference
to _SUBDIR;
- wrap the modified text at 80 columns;
- add "macro" to golang and luarocks infra;
- use "A few additional variables" for qmake and waf.
At same time, add a missing format on golang manual for
BR2_PACKAGE_HOST_GO_HOST_ARCH_SUPPORTS.
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Arnout:
- remove the examples;
- add "the" where "macro" was added;
- rewrite the preceding paragraphs for kconfig to make it more
consistent.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Each linux tool uses a fragment of a .mk file, named, for instance:
package/linux-tools/linux-tool-cpupower.mk.in
So currently check-package does not check these files.
Add the support in check-package script.
At the same time, factor out a function to derive package prefix from
the filename being checked, so the fix (calling os.path.splitext twice)
can be applied in a single place.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Arnout: add docstring and explain double splitext to
get_package_prefix_from_filename]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Bring Sysprof twelve years into the future by updating it to the most
recent release. The GUI now uses GTK4, for which there is not yet a
package, so for now the option is removed.
Obviously, many things changed:
- Build system moved to meson
- License moved from GPLv2 to GPLv3
- Many new dependencies
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ti-k3-r5-loader is just a U-Boot SPL running on the R5 core on TI's K3
processors, so it makes sense to just share the downloads with U-Boot.
With commit ebe238f2b5 (package/pkg-download: use _DL_SUBDIR as root
dir of generated archives), the root of the generated archive will also
be based on _DL_SUBDIR, but the name of the archive, _SOURCE, is still
based on the current package unless explicitly set. For ti-k3-r5-loader,
that would create an archive which fiename does not match its root
directory; although Buildroot does not care (we --strip-components=1
when extracting), this would be a bit surprising to anyone manually
extrating the archive, as it diverges from the usual expectations.
Do like we do for linux-headers, and force the ti-k3-r4-loader archive
filename to be u-boot-VERSION.tar.gz
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Bryan Brattlof <bb@ti.com>
Cc: Xuanhao Shi <X15000177@gmail.com>
Cc: Paresh Bhagat <p-bhagat@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Fix the following musl build failure with gcc 14:
daemon/old_main.c: In function 'old_main':
daemon/old_main.c:56:11: error: implicit declaration of function 'strcmp' [-Wimplicit-function-declaration]
56 | if(!strcmp((which_mouse->opt_dev),"-")) fd=0; /* use stdin */
| ^~~~~~
daemon/old_main.c:35:1: note: include '<string.h>' or provide a declaration of 'strcmp'
34 | #include "headers/gpmInt.h" /* daemon internals */
+++ |+#include <string.h>
35 |
While at it, add Upstream tags to other patches
Fixes:
- http://autobuild.buildroot.org/results/3192740863d57e72e90e622683e7b9fcc057fa8b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that all zynqmp defconfigs have been bumped to xilinx-v2024.1, this patch
cleans up the board/zynqmp dir by removing files that are no longer necessary.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps the zynqmp_kria_kd240_defconfig to xilinx-v2024.1 which includes
the following updates:
- Linux v6.6.10
- U-Boot v2024.01
- ATF v2.10
- PMUFW xilinx-v2024.1
Migrated u-boot to xilinx_zynqmp_kria_defconfig, so uboot.fragment no longer
needed.
With u-boot 2024.1, CONFIG_SYS_SPI_U_BOOT_OFFS has a new meaning. It is now
the offset between the base address of the boot.bin and u-boot.itb instead of
a raw base address of u-boot.itb. This allows for A/B firmware updates since
the u-boot.itb is set by default to a 0x80000 offset of the boot.bin.
Thus, Kria SOMs come with the following QSPI address table.
Partition A:
0x200000 - boot.bin
0x280000 - u-boot.itb
Partition B:
0xF80000 - boot.bin
0x1000000 - u-boot.itb
In addition, the kd240 still requires a board specific patch for the usb to sd
card bridge device. Without the board specific patch in the
./board/zynqmp/kria/kd240/patches directory, the usb will not come up correctly
and u-boot will not be able to find the sd card containing the Linux kernel and
file system.
Upstream: https://patchwork.ozlabs.org/project/uboot/patch/20240604083854.2033917-1-neal.frager@amd.com/
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, oatpp fails to build with output:
Applying 0001-src-oatpp-core-base-Environment.hpp-include-cstdarg.patch using patch:
patching file src/oatpp/core/base/Environment.hpp
Hunk #1 FAILED at 29.
1 out of 1 hunk FAILED -- saving rejects to file src/oatpp/core/base/Environment.hpp.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, pulseview fails to build with output:
Applying 0001-Replace-obsolete-deprecated-Qt-methods.patch using patch:
patching file pv/util.cpp
Hunk #2 succeeded at 175 (offset 4 lines).
Hunk #3 succeeded at 285 (offset 4 lines).
patching file pv/util.hpp
Hunk #2 succeeded at 139 (offset 1 line).
patching file pv/views/trace/decodetrace.cpp
Hunk #1 FAILED at 103.
1 out of 1 hunk FAILED -- saving rejects to file pv/views/trace/decodetrace.cpp.rej
Applying 0003-Support-glibmm-2.68.patch using patch:
patching file CMakeLists.txt
Hunk #3 FAILED at 231.
Hunk #4 FAILED at 492.
2 out of 4 hunks FAILED -- saving rejects to file CMakeLists.txt.rej
This commit refreshes the package patches on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fail2ban 1.1.0 brings Python 3.12 compatibility, and removes support
for 2.x. This means 2to3 handling can be dropped.
Unfortunately fail2ban 1.1.0 still relies on asynchat and asyncore,
which have been removed from the Python standard library in
3.12. Depend on the compatibility package python-pyasynchat (which
pulls in python-pyasyncore) and remove copies bundled in upstream
code.
Signed-off-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commits 3988f2d923 and
0d91281d7b added hashes for the chromebook
defconfigs, but forgot to remove the exception from .checkpackageignore.
Regenerate .checkpackageignore, which removes those exceptions.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
When packaging data_files in a wheel, those files shall have the destination
path expressed as relative to the wheel installation.
The reason for that is the wheel installation shall be contained inside a
specific folder and/or in site-packages.
When building the wheel file by the bdist_wheel command, python will package
files with absolute paths as python files ending up installing them in
site-packages.
Fixes:
http://autobuild.buildroot.net/results/36ac5278d19195a21c3d02d087965e08f49228ef
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Tested-by: Fiona Klute <fiona.klute+wiwa@gmx.de>
[Arnout: add Upstream tag to the patch]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
When installing a wheel in pep517 compatibility mode, the pyinstaller.py is
invoked with the --data parameter which point to the directory in which data
files should be installed.
Actually the --data parameter points to the /usr subdirectory which is indeed
wrong cause it shall point to the root directory where the wheel will be
installed.
This fixes the problem of having configuration files installed in /usr/etc
instead of /etc.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Tested-by: Fiona Klute <fiona.klute+wiwa@gmx.de>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Since its inception in 146498d13c (package/bcc: new package), not all
the dependencies of bcc are mirrored in the comment to be displayed when
those dependencies are not met.
Fix that by adding the missing pieces:
- wchar,
- threads
- dynamic libs,
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Jugurtha BELKALEM <jugurtha.belkalem@smile.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes http://autobuild.buildroot.net/results/1d5804974153f96e80f5200793ec8cd12c9fa18a/
GCC 14 complains if the arguments to calloc (nmemb, size) are swapped
around, causing a build failure as dump1090 builds with -Werror:
net_io.c:107:34: error: 'calloc' sizes specified with 'sizeof' in the earlier argument and not in the later argument [-Werror=calloc-transposed-args]
107 | if (!(service = calloc(sizeof(*service), 1))) {
Add a patch from an upstream pull request to fix that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch adds .hash files for Arm trusted firmware, Linux, Linux headers
and U-Boot and then enables BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we
can now drop the defconfig from .checkpackageignore.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
qt5webkit build currently breaks on the following error:
XSLStyleSheetLibxslt.cpp:148:129: error: invalid conversion from ‘void (*)(void*, xmlError*)’ {aka ‘void (*)(void*, _xmlError*)’} to ‘xmlStructuredErrorFunc’ {aka ‘void (*)(void*, const _xmlError*)’} [-fpermissive]
148 | XMLDocumentParserScope scope(cachedResourceLoader(), XSLTProcessor::genericErrorFunc, XSLTProcessor::parseErrorFunc, console);
| ^
| |
| void (*)(void*, xmlError*) {aka void (*)(void*, _xmlError*)}
This error is due to an API update in libxml2, enforcing const on more
struct in version 2.12.0 (see [1]). Buildroot now tracks v2.12.5.
Upstream Webkit project has already issued the corresponding fix ([2]),
which updates corresponding internal prototypes depending on libxml2
version, but the qt5webkit version tracked in buildroot does not integrate
the corresponding Webkit version.
Fix this build issue by bringing the upstream patch "as is" from Webkit
No autobuilder references because this build error was hidden by
another build error fixed in a previous patch.
[1] https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.12.0
[2] https://github.com/WebKit/WebKit/commit/1bad176b2496579d760852c80cff3ad9fb7c3a4b
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
qt5webkit build currently fails with the following error:
[...] parser.rb:587:in `block in parseSequence': undefined method `=~' for an instance of Annotation (NoMethodError)
from <internal:kernel>:187:in `loop'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:586:in `parseSequence'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:654:in `block in parseSequence'
from <internal:kernel>:187:in `loop'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:586:in `parseSequence'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:814:in `parseData'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:818:in `parse'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:780:in `block in parseSequence'
from <internal:kernel>:187:in `loop'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:586:in `parseSequence'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:625:in `block in parseSequence'
from <internal:kernel>:187:in `loop'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:586:in `parseSequence'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:814:in `parseData'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/parser.rb:818:in `parse'
from /home/alexis/src/buildroot_min/output/build/qt5webkit-5.212.0-alpha4/Source/JavaScriptCore/offlineasm/generate_offset_extractor.rb:68:in `<main>'
This issue is due to =~ being marked as deprecated since a few Ruby
versions, and finally removed in 3.2.0 [1]. This now breaks the build since
buildroot has moved to Ruby v3.3.0.
The corresponding fix has already been issued in upstream Webkit project
[2], but qt5webkit version tracked in buildroot does not have the
corresponding webkit version pulled. Fix this build error by bringing the upstream
patch. The patch is slightly modified (exclude part about Changelog file,
which is absent from qt5webkit)
Fixes:
http://autobuild.buildroot.net/results/21397b110fe02e5711ecb1d35be2108221751b0a/
[1] https://www.ruby-lang.org/en/news/2022/12/25/ruby-3-2-0-released/
[2] https://github.com/WebKit/WebKit/commit/c7d19a492d97f9282a546831beb918e03315f6ef
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, qt5webkit fails to build with output:
Applying 0004-Remove-invalid-g_object-declarations-to-fix-build-wi.patch using patch:
patching file Source/WTF/wtf/glib/GRefPtr.h
Hunk #1 FAILED at 29.
1 out of 1 hunk FAILED -- saving rejects to file Source/WTF/wtf/glib/GRefPtr.h.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add optional c extension for python-ruamel-yaml which can speed up yaml
loading/parsing.
Extend the ruamel-yaml runtime test to check if the c extension works
correctly.
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with python 3.12 (which removed imp
module):
Traceback (most recent call last):
File "/home/autobuild/autobuild/instance-7/output-1/build/jack2-1.9.22/./waf", line 166, in <module>
from waflib import Scripting
File "/home/autobuild/autobuild/instance-7/output-1/build/jack2-1.9.22/waflib/Scripting.py", line 10, in <module>
from waflib import Utils, Configure, Logs, Options, ConfigSet, Context, Errors, Build, Node
File "/home/autobuild/autobuild/instance-7/output-1/build/jack2-1.9.22/waflib/Configure.py", line 16, in <module>
from waflib import ConfigSet, Utils, Options, Logs, Context, Build, Errors
File "/home/autobuild/autobuild/instance-7/output-1/build/jack2-1.9.22/waflib/Options.py", line 14, in <module>
from waflib import Logs, Utils, Context, Errors
File "/home/autobuild/autobuild/instance-7/output-1/build/jack2-1.9.22/waflib/Context.py", line 9, in <module>
import os, re, imp, sys
ModuleNotFoundError: No module named 'imp'
Fixes: 36e635d2d5
- http://autobuild.buildroot.org/results/1bfe34e10ffdab80647ac01863165e93bcc9b0d8
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
genrandconfig is used in autobuilders, and some autobuilders are running
on old distributions that are lacking the most recent CAs, causing build
failures because package sources can't be retrieved.
Do for the curl backend what we already did a while back for the wget
backend, with commit 0866a280e4 (utils/genrandconfig: use
--no-check-certificate in wget by default); in curl, the equivalent
would be --insecure, and applies to the ftps transport.
The integrity of the downloads are validated against our bundled hashes
so there is no risk of corruption of the downloaded files. The only
issue would be that an MITM could inspect the transaction, the same way
as for the wget --no-check-certificate in 0866a280e4, but this is not
considered a high-level issue (we're anyway talking FTPS here, that's a
legacy protocol that has other issues).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since we no longer use WGET to retrieve FTP-hosted files, we can drop
the --passive-ftp option from genrandconfig, as it would cause
problems on systems that use wget2.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Recent versions of wget, starting with wget 2.0, aka wget2 thereafter,
no longer support FTP (nor FTPS, aka FTP-over-SSL). wget2 is packaged in
Fedora 40, recently released; F40 does not even have the old wget
available in its repository anymore.
Introduce cURL as a download backend, that we use for FTP and FPTS
protocols.
Note that the -q flag does not means being quiet; it means that a curlrc
file should not be parsed. The long option is --disable, which meaning
is not much more obivous than the short -q. It also has to be the first
option on the command line.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Roy recently introduced a number of additional qt6 packages, let's
add him to the DEVELOPERS file for those packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Network module is explicitly required by qt6tools:
Failed to find required Qt component "Network".
We need host-qt6base with Sql support for host-qt6tools to build the
qhelpgenerator host tool. qt6tools will fail to build if qhelpgenerator
is not available:
Failed to find the host tool "Qt6::qhelpgenerator". It is part of the
Qt6ToolsTools package, but the package did not contain the tool. Make sure
that the host module Tools was built with all features enabled (no
explicitly disabled tools).
Signed-off-by: Roy Kollen Svendsen <roykollensvendsen@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add host-qt6wayland as dependency to build the qtwaylandscanner host
tool:
Failed to find the host tool "Qt6::qtwaylandscanner". It is part of the
Qt6WaylandScannerTools package, but the package could not be found. Make
sure you have built and installed the host WaylandScanner module, which
will ensure the creation of the Qt6WaylandScannerTools package.
Select the qt6base and host-qt6base Gui modules to avoid skipping the
build:
Skipping the build as the condition "TARGET Qt::Gui" is not met.
Signed-off-by: Roy Kollen Svendsen <roykollensvendsen@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add host-qt6svg to dependencies when qt6svg is available to build the
required svgtoqml host tool:
Failed to find the host tool "Qt6::svgtoqml". It is part of the
Qt6QuickTools package, but the package could not be found. Make sure you
have built and installed the host Quick module, which will ensure the
creation of the Qt6QuickTools package.
Select the host-qt6base Testlib module to build the qmltestrunner host
tool when the qt6base Testlib module is enabled:
Failed to find the host tool "Qt6::qmltestrunner". It is part of the
Qt6QmlTools package, but the package did not contain the tool. Make sure
that the host module Qml was built with all features enabled (no explicitly
disabled tools).
Select the host-qt6base Network module to build the qmlprofiler host
tool when the qt6base Network module is enabled:
Failed to find the host tool "Qt6::qmlprofiler". It is part of the
Qt6QmlTools package, but the package did not contain the tool. Make sure
that the host module Qml was built with all features enabled (no explicitly
disabled tools).
Add patch to avoid checking for FEATURE_ssl when FEATURE_network
is not available. FEATURE_ssl is defined by the Qt Network module. So
we will get the following build failure if the patch is not applied and
FEATURE_network=ON:
Attempting to evaluate feature ssl but its definition is missing. Either
the feature does not exist or a dependency to the module that defines it is
missing
Signed-off-by: Roy Kollen Svendsen <roykollensvendsen@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- To match NXP 6.1.55-2.2.0 release.
- EULA/COPYING: update to LA_OPT_NXP_Software_License v49.
Signed-off-by: Chris Dimich <cdimich2188@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
- To match NXP 6.1.55-2.2.0 release.
- EULA/COPYING: update to LA_OPT_NXP_Software_License v49.
Signed-off-by: Chris Dimich <cdimich2188@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The Qt6::Gui module is needed when building the 'Qt Shader Baker'
(qsb) host tool.
Qsb is needed for converting the Qt6 Vulkan GLSL source code to
platform specific shader languages which is then later copied to
target.
For more details take a look at:
https://doc.qt.io/qt-6/qtshadertools-overview.html
and
https://doc.qt.io/qt-6/qshaderbaker.html
We need host-qt6base with Gui support when building host-qt6shadertools,
otherwise the build is skipped and no qsb host tool is generated:
Skipping the build as the condition "TARGET Qt::Gui" is not met.
qt6shadertools fail to build if qsb is not available:
Failed to find the host tool "Qt6::qsb". It is part of the
Qt6ShaderToolsTools package, but the package could not be found. Make sure
you have built and installed the host ShaderTools module, which will ensure
the creation of the Qt6ShaderToolsTools package.
Signed-off-by: Roy Kollen Svendsen <roykollensvendsen@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We need host qt6base with Sql support for host-qt6tools to generate the
qhelpgenerator host tool. qt6tools will fail to build if qhelpgenerator is not
available.
Signed-off-by: Roy Kollen Svendsen <roykollensvendsen@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We need host-qt6base with Testlib support when building host-qt6declarative
with QuickTest support. QuickTest support is further required for building the
qmltestrunner host tool. qt6declarative will fail to build if qmltestrunner is
not available.
Signed-off-by: Roy Kollen Svendsen <roykollensvendsen@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We need host-qt6base with Gui support when building host-qt6shadertools,
otherwise the build is skipped and no qsb host tool is generated.
qt6shadertools fail to build if qsb is not available.
Signed-off-by: Roy Kollen Svendsen <roykollensvendsen@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Arm Mali GPUs that belong to the 10th generation of the hardware
architecture need a binary firmware to implement the full
specification.
For the panthor kernel driver to be able to execute jobs on the GPU it
needs this firmware.
Signed-off-by: Andy Yan <andyshrk@163.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We're going to add hashes soon, so we'll need to have that directory
populated with hash files, and it would then be a bit confusing to not
have the patch file in the patches directory...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This package provides NXP i.MX uPower firmware present on i.MX 8ULP SoC.
This version comes from the NXP 6.1.55-2.2.0 release.
Signed-off-by: Chris Dimich <cdimich2188@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
- To match NXP 6.1.55-2.2.0 release.
- EULA/COPYING: update to LA_OPT_NXP_Software_License v49.
Signed-off-by: Chris Dimich <cdimich2188@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
- To match NXP 6.1.55-2.2.0 release.
- EULA/COPYING: update to LA_OPT_NXP_Software_License v49.
Signed-off-by: Chris Dimich <cdimich2188@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
- To match NXP 6.1.55-2.2.0 release.
- EULA/COPYING: update to LA_OPT_NXP_Software_License v49.
Signed-off-by: Chris Dimich <cdimich2188@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
- To match NXP 6.1.55-2.2.0 release.
- EULA/COPYING: update to LA_OPT_NXP_Software_License v49.
Signed-off-by: Chris Dimich <cdimich2188@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
- To match NXP 6.1.55-2.2.0 release.
- EULA/COPYING: update to LA_OPT_NXP_Software_License v49.
Signed-off-by: Chris Dimich <cdimich2188@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
- To match NXP 6.1.55-2.2.0 release.
- EULA/COPYING: update to LA_OPT_NXP_Software_License v49.
Signed-off-by: Chris Dimich <cdimich2188@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Since commit 6b86f07 (package/fmt: bump to version 11.0.1), mpd fails to build:
/home/data/buildroot.x86_64/host/x86_64-buildroot-linux-uclibc/sysroot/usr/include/fmt/base.h:1392:29: error: passing ‘const fmt::v11::formatter<std::__exception_ptr::exception_ptr>’ as ‘this’ argument discards qualifiers [-fpermissive]
1392 | ctx.advance_to(cf.format(*static_cast<qualified_type*>(arg), ctx));
| ~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from ../src/Log.cxx:5:
../src/lib/fmt/ExceptionFormatter.hxx:15:14: note: in call to ‘auto fmt::v11::formatter<std::__exception_ptr::exception_ptr>::format(std::__exception_ptr::exception_ptr, FormatContext&) [with FormatContext = fmt::v11::context]’
15 | auto format(std::exception_ptr e, FormatContext &ctx) {
| ^~~~~~
Adapt an upstream change to restore mpd compatibility with fmt 11.
Fixes:
http://autobuild.buildroot.net/results/73514ea76a5960f59b4c50e2074571b10e4682d4http://autobuild.buildroot.net/results/a58ddbdfe35bd19021e65db0b8b8cc4c1c884d51
Signed-off-by: Andreas Ziegler <br015@umbiko.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Backport a patch from upstream that adds the magic number for the
bcachefs superblock. Otherwise, systemd 254.13 fails to compile with
the latest kernel versions.
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following error when compiled against GCC 14.x:
tftp.c: In function ‘tftp_sendfile’:
tftp.c:88:5: error: implicit declaration of function ‘bsd_signal’; did
you mean ‘ssignal’? [-Wimplicit-function-declaration]
88 | bsd_signal(SIGALRM, timer);
| ^~~~~~~~~~
| ssignal
tftp.c:88:5: warning: nested extern declaration of ‘bsd_signal’ [-Wnested-externs]
main.c: In function ‘main’:
main.c:308:5: error: implicit declaration of function ‘bsd_signal’;
did you mean ‘ssignal’? [-Wimplicit-function-declaration]
308 | bsd_signal(SIGINT, intr);
| ^~~~~~~~~~
| ssignal
main.c:308:5: warning: nested extern declaration of ‘bsd_signal’ [-Wnested-externs]
Remove an upstreamed patch.
tftpd/tftpd.c has changed, hence, change its checksum.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
In commit 360a7cd738 ("package/systemd:
bump linux-headers dependency to 4.14"), the headers requirements were
bumped to 4.14 because of new build failures due to
LOOP_SET_BLOCK_SIZE.
Even though systemd does not recommend using it with headers <
4.15 (see [1]), it is still possible to build it and use some of its
features (after fixing the build failure).
Note that this was build-tested with 4.4 headers only, and not all the
way back to 3.15 (which is the version requirement that was used
before 360a7cd738).
[1]: https://github.com/systemd/systemd/blob/main/README
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ENABLE_SYSTEMD option has been removed from ubus by upstream commit:
96ab0b3032f5 ubusd: remove systemd socket activation support
From a Buildroot perspective, this means that this systemd socket
activation feature no longer exists since Buildroot commit
130be80d34 ("ubus: bump version"), as we
bumped ubus from 259450f414d8c9ee41896e8e6d6bc57ec00e2b63 to
34c6e818e431cc53478a0f7c7c1eca07d194d692 in this commit, and the
96ab0b3032f5 ("ubusd: remove systemd socket activation support")
commit is in this range. It was therefore dropped upstream in 2016,
and in Buildroot in 2017.
Signed-off-by: Jan Havran <havran.jan@email.cz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch adds .hash files for Linux, Linux headers and U-Boot and then
enables BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we can now drop the
defconfig from .checkpackageignore.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch bumps the Linux kernel to version 5.15.162 for both
configurations and U-Boot to version 2024.04 for the SD one. Using the
same kernel will subsequently allow adding the hash files in a single
location.
Furthermore, now even the xip configuration uses the same headers as
the used Linux kernel.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
See here for a ChangeLog:
https://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-20-current.md
20.8.1 contains a fix for CVE-2024-35190. However, the vulnerability
was introduced in commit 68a49128253f677f9e1b235c70d2316342372f7d
between 20.7.0 and 20.8.0, and Buildroot was using 20.7.0, so we were
not affected by this vulnerability.
Patch 0005 is applied upstream.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The package compilation for the raspberrypi3_qt5we_defconfig raises the
following error:
In file included from buildroot/output/build/snappy-1.1.10/snappy.cc:29:
buildroot/output/build/snappy-1.2.1/snappy-internal.h: In function ‘snappy::internal::V128 snappy::internal::V128_Shuffle(V128, V128)’:
buildroot/output/build/snappy-1.2.1/snappy-internal.h:109:10: error: ‘vqtbl1q_u8’ was not declared in this scope; did you mean ‘vtbl1_u8’?
109 | return vqtbl1q_u8(input, shuffle_mask);
| ^~~~~~~~~~
| vtbl1_u8
make[4]: *** [CMakeFiles/snappy.dir/build.make:118: CMakeFiles/snappy.dir/snappy.cc.o] Error 1
The issue was raised by commit b3fb0b5b4b076 ("Enable vector byte
shuffle optimizations on ARM NEON") contained in version 1.1.10.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As requested by Buildroot's autobuilder tracking outdated packages.
Build tested with:
$ ./utils/test-pkg -c ltris.config -p ltris -a
arm-aarch64 [ 1/41]: OK
bootlin-aarch64-glibc [ 2/41]: OK
bootlin-arcle-hs38-uclibc [ 3/41]: OK
bootlin-armv5-uclibc [ 4/41]: OK
bootlin-armv7-glibc [ 5/41]: OK
bootlin-armv7m-uclibc [ 6/41]: SKIPPED
bootlin-armv7-musl [ 7/41]: OK
bootlin-m68k-5208-uclibc [ 8/41]: SKIPPED
bootlin-m68k-68040-uclibc [ 9/41]: OK
bootlin-microblazeel-uclibc [10/41]: OK
bootlin-mipsel32r6-glibc [11/41]: OK
bootlin-mipsel-uclibc [12/41]: OK
bootlin-nios2-glibc [13/41]: OK
bootlin-openrisc-uclibc [14/41]: OK
bootlin-powerpc64le-power8-glibc [15/41]: OK
bootlin-powerpc-e500mc-uclibc [16/41]: OK
bootlin-riscv32-glibc [17/41]: OK
bootlin-riscv64-glibc [18/41]: OK
bootlin-riscv64-musl [19/41]: OK
bootlin-s390x-z13-glibc [20/41]: OK
bootlin-sh4-uclibc [21/41]: OK
bootlin-sparc64-glibc [22/41]: OK
bootlin-sparc-uclibc [23/41]: OK
bootlin-x86-64-glibc [24/41]: OK
bootlin-x86-64-musl [25/41]: OK
bootlin-x86-64-uclibc [26/41]: OK
bootlin-x86-i686-musl [27/41]: OK
bootlin-xtensa-uclibc [28/41]: OK
br-arm-basic [29/41]: OK
br-arm-full-nothread [30/41]: OK
br-arm-full-static [31/41]: OK
br-i386-pentium4-full [32/41]: OK
br-mips64-n64-full [33/41]: OK
br-mips64r6-el-hf-glibc [34/41]: OK
br-powerpc-603e-basic-cpp [35/41]: OK
br-powerpc64-power7-glibc [36/41]: OK
linaro-aarch64-be [37/41]: OK
linaro-aarch64 [38/41]: OK
linaro-arm [39/41]: OK
sourcery-mips64 [40/41]: OK
sourcery-mips [41/41]: OK
41 builds, 2 skipped, 0 build failed, 0 legal-info failed, 0 show-info failed
$ cat ltris.config
BR2_PACKAGE_LTRIS=y
BR2_PACKAGE_LTRIS_AUDIO=y
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit
7efd75867c ("configs/ti_am64x_sk_defconfig:
update U-Boot to v2024.04") updated U-Boot and the ti-k3-r5-loader to
2024.04, but did not update the hash files in board/ti/am62x-sk/. It
ended up working for now, because the official versions of boot/uboot
and boot/ti-k3-r5-loader/ also use 2024.04 and therefore have this
hash, but it would have started failing as soon as boot/uboot and/or
boot/ti-k3-r5-loader official version were updated.
Signed-off-by: Gero Schwäricke <gero.schwaericke@grandcentrix.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit
cc2910a7db ("configs/ti_am62x_sk_defconfig:
update U-Boot to v2024.04") updated U-Boot and the ti-k3-r5-loader to
2024.04, but did not update the hash files in board/ti/am62x-sk/. It
ended up working for now, because the official versions of boot/uboot
and boot/ti-k3-r5-loader/ also use 2024.04 and therefore have this
hash, but it would have started failing as soon as boot/uboot and/or
boot/ti-k3-r5-loader official version were updated.
Signed-off-by: Gero Schwäricke <gero.schwaericke@grandcentrix.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
imx_gpio driver is used on NXP i.MX family of SoCs and required e.g. for
programming noridc microcontrollers on SolidRun SolidSense family of
devices.
Add new config variable BR2_PACKAGE_OPENOCD_IMXGPIO for imx_gpio driver.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We can use urllib.request without adding any addition lines of code
compared with requests which is not part of the stdlib.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add missing stdio.h include. Without this includes, the build fails
with the following error under GCC 14.x:
../../../com32/lib/syslinux/debug.c: In function ‘syslinux_debug’:
../../../com32/lib/syslinux/debug.c:91:5: error: implicit declaration of function ‘printf’ [-Wimplicit-function-declaration]
91 | printf("Dynamic debug unavailable\n");
Signed-off-by: Lance Fredrickson <lancethepants@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
GNU Octave supports the --with-openssl configure option since v4.0.0.
For reference, commit 40ea68b4b2 "package/octave: new package"
introduced the package at v7.1.0.
This commits adds this optional support.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mathieu privately informed me that he no longer has access to the
TS4900 board, he is therefore unable to maintain this board moving
forward. Let's drop his entry from the DEVELOPERS file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Import a patch that has been backported by upstream to the 2.44 release
branch that fixes the build when the target is an ARM processor that
supports NEON instructions.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
tpm2-tss support is available since gnutls 3.7.3 using
--{with,without}-tpm2 configure option [1].
Since the option is not handled by gnutls package, tpm2-tss support
can be enabled if tpm2-tss package is build before gnutls package.
Likewise, tpm2-tss support can be enabled for the gnutls host variant
if tpm2-tss libraries are installed on the host.
Make sure to disable tpm2-tss support for the host-gnutls.
[1] https://lists.gnupg.org/pipermail/gnutls-help/2022-January/004736.html
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Version 2.1.0 is a major bump, with an API change that should be
backward compatible with version up to 1.6.1.
The runtime test failed in timeout because the crng init did not have
time to complete in the default 5-second timeout; tests showed that the
trip-off would be between 6s and 7s here, so increase it enough to leave
some margin on less-capable machines.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Davide Viti <zinosat@gmail.com>
Cc: James Hilliard <james.hilliard1@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since upstream commit 7d931f8afa51d83e9eaee3a3f449bc2f86a5edf3, which
first appeared in linux-firmware 20240709, the amlogic bluetooth
firmware files have been moved from amlogic/bluetooth/ to directly
amlogic/.
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The "msd" (mass storage device) firmware files in 2021.07.01 don't
work with some newer CM4 based devices, the one I had issues with is a
RevPi Connect 4. Updating fixes the issue. Mass storage device mode is
required to flash the eMMC of CM4 devices.
Signed-off-by: Fiona Klute <fiona.klute+wiwa@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, the stmmac driver is configured as a module in the defconfig, which
means that the network functionality is not available until the driver module
is manually inserted.
Use extra config fragment to integrate it directly into the kernel, ensuring that network
functionality is available immediately upon boot.
Signed-off-by: Aleksandr Makarov <aleksandr.o.makarov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
pyasynchat is a compatibility package that provides the asynchat
module removed from the standard library in Python 3.12. It is needed
to support fail2ban without a bundled copy and should be removed as
soon as nothing in Buildroot depends on it.
Signed-off-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
pyasyncore is a compatibility package that provides the asyncore
module removed from the standard library in Python 3.12. It is needed
to support fail2ban without a bundled copy and should be removed as
soon as nothing in Buildroot depends on it.
Signed-off-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch updates the Buildroot repository's GitHub configuration to better
manage incoming pull requests.
- Added a new GitHub Actions workflow (`repo-lockdown.yml`) to automatically
handle new pull requests.
The new workflow:
- Triggers on new pull requests.
- Uses the `dessant/repo-lockdown` action to:
- Comment on the pull request, guiding contributors to use the mailing list
for patch submission.
- Lock the pull request to prevent further discussion.
- Close the pull request.
This change ensures that contributors are properly directed to the preferred
method of patch submission via the mailing list, maintaining consistency and
streamlining the review process.
Signed-off-by: Dongdong Zhang <zhangdongdong@eswincomputing.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, nvidia-driver fails to build with output:
Applying 0001-use-LDFLAGS.patch using patch:
patching file kernel/nvidia/nvidia.Kbuild
Hunk #1 FAILED at 87.
1 out of 1 hunk FAILED -- saving rejects to file kernel/nvidia/nvidia.Kbuild.rej
patching file kernel/nvidia-modeset/nvidia-modeset.Kbuild
Hunk #1 FAILED at 70.
1 out of 1 hunk FAILED -- saving rejects to file kernel/nvidia-modeset/nvidia-modeset.Kbuild.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, paxtest fails to build with output:
Applying 0001-genpaxtest-move-log-location.patch using patch:
patching file genpaxtest
Hunk #1 FAILED at 35.
1 out of 1 hunk FAILED -- saving rejects to file genpaxtest.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This brings the script in line with .editorconfig settings and other
newer init scripts.
Signed-off-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The previously used "killall sshd" stopped all instances of sshd. With
OpenSSH before 9.8 that meant not only the listening server, but also
instances serving currently open sessions, possibly including the one
used to send the restart command, preventing it from completing the
"start" part of "restart" and leaving the system unreachable over SSH.
start-stop-daemon uses the PID file to target only the intended
process, and has built-in capability to check if it is running. This
ensures any open SSH sessions are unaffected, as well as unrelated
processes (in case a daemon crashed and the PID got reused).
Signed-off-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Unfortunately not all mail providers deliver mails with subaddressing,
mention people can acknowledge a sponsor in the author name instead.
Signed-off-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, shairport-sync fails to build with output:
Applying 0001-configure.ac-find-sndfile-through-pkg-config.patch using patch:
patching file configure.ac
Hunk #1 FAILED at 304.
1 out of 1 hunk FAILED -- saving rejects to file configure.ac.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Linux version are changed to 6.6.32 (LTS) for all qemu defconfigs.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This fixes link time errors, undefined references to various ENGINE_*
functions (paths shortened to the output directory):
host/lib/gcc/aarch64-buildroot-linux-musl/13.3.0/../../../../aarch64-buildroot-linux-musl/bin/ld: librauc.a.p/src_signature.c.o: in function `get_pkcs11_engine.constprop.0':
signature.c:(.text.get_pkcs11_engine.constprop.0+0x14): undefined reference to `ENGINE_load_builtin_engines'
host/lib/gcc/aarch64-buildroot-linux-musl/13.3.0/../../../../aarch64-buildroot-linux-musl/bin/ld: signature.c:(.text.get_pkcs11_engine.constprop.0+0x20): undefined reference to `ENGINE_by_id'
host/lib/gcc/aarch64-buildroot-linux-musl/13.3.0/../../../../aarch64-buildroot-linux-musl/bin/ld: signature.c:(.text.get_pkcs11_engine.constprop.0+0x54): undefined reference to `ENGINE_ctrl_cmd_string'
host/lib/gcc/aarch64-buildroot-linux-musl/13.3.0/../../../../aarch64-buildroot-linux-musl/bin/ld: signature.c:(.text.get_pkcs11_engine.constprop.0+0x60): undefined reference to `ENGINE_init'
host/lib/gcc/aarch64-buildroot-linux-musl/13.3.0/../../../../aarch64-buildroot-linux-musl/bin/ld: signature.c:(.text.get_pkcs11_engine.constprop.0+0xe0): undefined reference to `ENGINE_ctrl_cmd_string'
host/lib/gcc/aarch64-buildroot-linux-musl/13.3.0/../../../../aarch64-buildroot-linux-musl/bin/ld: signature.c:(.text.get_pkcs11_engine.constprop.0+0x128): undefined reference to `ENGINE_free'
host/lib/gcc/aarch64-buildroot-linux-musl/13.3.0/../../../../aarch64-buildroot-linux-musl/bin/ld: signature.c:(.text.get_pkcs11_engine.constprop.0+0x1a4): undefined reference to `ENGINE_finish'
host/lib/gcc/aarch64-buildroot-linux-musl/13.3.0/../../../../aarch64-buildroot-linux-musl/bin/ld: librauc.a.p/src_signature.c.o: in function `load_cert':
signature.c:(.text.load_cert+0x114): undefined reference to `ENGINE_ctrl_cmd'
host/lib/gcc/aarch64-buildroot-linux-musl/13.3.0/../../../../aarch64-buildroot-linux-musl/bin/ld: librauc.a.p/src_signature.c.o: in function `load_key':
signature.c:(.text.load_key+0x124): undefined reference to `ENGINE_load_private_key'
Before linking there were matching implicit declaration warnings
during compile.
[Peter: only select if libopenssl backend is used]
Signed-off-by: Fiona Klute <fiona.klute+wiwa@gmx.de>
Tested-by: Heiko Thiery <heiko.thiery@mail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Removed patch which is included in this release.
Use xz tarball and its sha256 hash, both provided by upstream.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, imx-vpu-hantro fails to build with output:
Applying 0001-Fix-ion.h-header-inclusion-to-be-standard.patch using patch:
patching file Makefile_G1G2
patching file Makefile_H1
patching file decoder_sw/software/linux/dwl/dwl_linux.c
Hunk #1 FAILED at 50.
1 out of 1 hunk FAILED -- saving rejects to file decoder_sw/software/linux/dwl/dwl_linux.c.rej
patching file h1_encoder/software/linux_reference/ewl/ewl_x280_common.c
Hunk #1 FAILED at 52.
1 out of 1 hunk FAILED -- saving rejects to file h1_encoder/software/linux_reference/ewl/ewl_x280_common.c.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
commit d9e6d2d081 "configs/visionfive2: update kernel to upstream
6.8.2" removed the config directive:
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
but forgot to add:
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_8=y
It was most likely generated with a "make savedefconfig", while Linux
kernel v6.8 was the default at that time. After commit aa70c331a2
"linux: bump latest version to 6.9", the defconfig failed to build
with error:
Incorrect selection of kernel headers: expected 6.9.x, got 6.8.x
This commit fixes the defconfig by adding back the kernel custom header
version.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7271150175
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, openvmtools fails to build with output:
Applying 0007-Use-configure-to-test-for-feature-instead-of-platfor.patch using patch:
patching file configure.ac
Hunk #1 succeeded at 940 (offset 142 lines).
Hunk #2 succeeded at 1150 (offset 86 lines).
patching file lib/misc/idLinux.c
Hunk #2 succeeded at 1022 (offset 28 lines).
patching file lib/nicInfo/nicInfoPosix.c
Hunk #1 FAILED at 34.
1 out of 1 hunk FAILED -- saving rejects to file lib/nicInfo/nicInfoPosix.c.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, rygel fails to build with output:
Applying 0001-meson.build-fix-g_ir_compiler-calls.patch using patch:
patching file src/librygel-core/meson.build
Hunk #1 succeeded at 73 (offset 3 lines).
patching file src/librygel-renderer-gst/meson.build
Hunk #1 succeeded at 37 (offset 1 line).
patching file src/librygel-renderer/meson.build
Hunk #1 FAILED at 43.
1 out of 1 hunk FAILED -- saving rejects to file src/librygel-renderer/meson.build.rej
patching file src/librygel-server/meson.build
Hunk #1 FAILED at 122.
1 out of 1 hunk FAILED -- saving rejects to file src/librygel-server/meson.build.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, redis fails to build with output:
Applying 0002-largefile-conditional-define.patch using patch:
patching file src/fmacros.h
Hunk #1 FAILED at 42.
1 out of 1 hunk FAILED -- saving rejects to file src/fmacros.h.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Tested-by: Titouan Christophe <titouanchristophe@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, ympd fails to build with output:
Applying 0002-added-forward-declarations.patch using patch:
patching file src/mpd_client.c
Hunk #1 succeeded at 29 (offset -1 lines).
patching file src/mpd_client.h
Hunk #1 FAILED at 96.
1 out of 1 hunk FAILED -- saving rejects to file src/mpd_client.h.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, vtun fails to build with output:
Applying 0002-fix-ssl-headers-checks.patch using patch:
patching file configure.in
Hunk #1 succeeded at 169 (offset 3 lines).
Hunk #2 succeeded at 179 (offset 3 lines).
Hunk #3 FAILED at 193.
Hunk #4 FAILED at 208.
2 out of 4 hunks FAILED -- saving rejects to file configure.in.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, sane-backends fails to build with output:
Applying 0001-sane_backend-add-missing-config.h.patch using patch:
patching file include/sane/sanei_backend.h
Hunk #1 FAILED at 8.
1 out of 1 hunk FAILED -- saving rejects to file include/sane/sanei_backend.h.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, snort fails to build with output:
Applying 0005-fix-sparc.patch using patch:
patching file configure.in
Hunk #1 FAILED at 942.
Hunk #2 succeeded at 915 (offset -42 lines).
1 out of 2 hunks FAILED -- saving rejects to file configure.in.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, mongrel2 fails to build with output:
Applying 0001-Do-not-run-tests.patch using patch:
patching file Makefile
Hunk #1 FAILED at 16.
1 out of 1 hunk FAILED -- saving rejects to file Makefile.rej
patching file tools/m2sh/Makefile
Hunk #1 FAILED at 9.
1 out of 1 hunk FAILED -- saving rejects to file tools/m2sh/Makefile.rej
Applying 0003-fix-build-with-gcc-4.8.patch using patch:
patching file Makefile
patching file tools/m2sh/Makefile
Hunk #1 FAILED at 10.
1 out of 2 hunks FAILED -- saving rejects to file tools/m2sh/Makefile.rej
This commit refreshes the package patches on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, libgdiplus fails to build with output:
Applying 0001-Build-unit-tests-only-when-enable-unit-tests-is-pass.patch using patch:
patching file Makefile.am
patching file configure.ac
Hunk #1 FAILED at 39.
1 out of 1 hunk FAILED -- saving rejects to file configure.ac.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, haserl fails to build with output:
Applying 0001-add-haserl_lualib.inc.patch using patch:
patching file src/haserl_lualib.inc
patching file src/Makefile.in
Hunk #1 succeeded at 86 (offset 54 lines).
Hunk #2 FAILED at 514.
1 out of 2 hunks FAILED -- saving rejects to file src/Makefile.in.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, nushell fails to build with output:
Applying 0001-uucore-add-support-for-sparc64.patch using patch:
patching file VENDOR/uucore/src/lib/features/fs.rs
Hunk #1 FAILED at 121.
Hunk #2 FAILED at 137.
2 out of 2 hunks FAILED -- saving rejects to file VENDOR/uucore/src/lib/features/fs.rs.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, monit fails to build with output:
Applying 0001-no-force-static.patch using patch:
patching file Makefile.am
Hunk #1 FAILED at 85.
1 out of 1 hunk FAILED -- saving rejects to file Makefile.am.rej
Applying 0002-configure.ac-fixes-missing-config-macro-dir.patch using patch:
patching file configure.ac
Hunk #1 FAILED at 8.
1 out of 1 hunk FAILED -- saving rejects to file configure.ac.rej
This commit refreshes the package patches on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, freeradius-server fails to build with output:
Applying 0001-jlibtool-cross-with-host-CC.patch using patch:
patching file scripts/libtool.mk
Hunk #1 FAILED at 43.
1 out of 1 hunk FAILED -- saving rejects to file scripts/libtool.mk.rej
Applying 0009-src-modules-rlm_python-fix-build-with-Ofast.patch using patch:
patching file src/modules/rlm_python3/configure.ac
Hunk #1 succeeded at 44 (offset -15 lines).
Hunk #2 FAILED at 73.
1 out of 2 hunks FAILED -- saving rejects to file src/modules/rlm_python3/configure.ac.rej
This commit refreshes the package patches on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, yajl fails to build with output:
Applying 0002-cmake-disable-shared-library-build-when-BUILD_SHARED.patch using patch:
patching file src/CMakeLists.txt
Hunk #1 FAILED at 37.
Hunk #2 succeeded at 52 (offset 1 line).
Hunk #3 succeeded at 79 (offset 1 line).
1 out of 3 hunks FAILED -- saving rejects to file src/CMakeLists.txt.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, dahdi-tools fails to build with output:
Applying 0002-no-perl-manpages.patch using patch:
patching file xpp/Makefile.am
Hunk #2 FAILED at 58.
Hunk #3 succeeded at 149 (offset 3 lines).
1 out of 3 hunks FAILED -- saving rejects to file xpp/Makefile.am.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, janus-gateway fails to build with output:
Applying 0002-Add-test-for-Wunused-but-set-variable.patch using patch:
patching file src/Makefile.am
Hunk #1 succeeded at 132 (offset -19 lines).
patching file configure.ac
Hunk #1 succeeded at 12 (offset -1 lines).
Hunk #2 FAILED at 67.
1 out of 2 hunks FAILED -- saving rejects to file configure.ac.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, ncmpc fails to build with output:
Applying 0001-meson.build-add-atomic-dependency-for-sparc.patch using patch:
patching file meson.build
Hunk #1 succeeded at 232 (offset 58 lines).
Hunk #2 FAILED at 355.
1 out of 2 hunks FAILED -- saving rejects to file meson.build.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, memstat fails to build with output:
Applying 0001-PATH_MAX.patch using patch:
patching file memstat.c
Hunk #1 FAILED at 19.
1 out of 1 hunk FAILED -- saving rejects to file memstat.c.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, lxc fails to build with output:
Applying 0001-src-lxc-syscall_numbers.h-drop-define-1.patch using patch:
patching file src/lxc/syscall_numbers.h
Hunk #1 FAILED at 53.
Hunk #2 FAILED at 92.
Hunk #3 FAILED at 129.
Hunk #4 FAILED at 166.
Hunk #5 FAILED at 203.
Hunk #6 FAILED at 272.
Hunk #7 FAILED at 309.
Hunk #8 FAILED at 346.
Hunk #9 FAILED at 383.
Hunk #10 FAILED at 440.
Hunk #11 FAILED at 477.
Hunk #12 FAILED at 518.
Hunk #13 FAILED at 759.
13 out of 13 hunks FAILED -- saving rejects to file src/lxc/syscall_numbers.h.rej
This commit refreshes the package patch on the current package version.
As you can see from [1], the patch was created for version v6.0.0 but
has been backported in Buildroot without being rebased on lxc v5.0.0,
where loongarch64 support was not yet merged. This is further evidence
of the importance of applying patches with fuzz 0.
[1] https://github.com/lxc/lxc/commit/82fe01821cd5cb8548598d7d93b07d6ef3f6b604
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The Mind website changed more than a year ago, and the link on the
support page no longer works. Link to a different page instead.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Since the LTS sponsoring program hasn't started yet (it will hopefully
start in September), this is just placeholder text. The first paragraph
will stay however.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Include sponsoring the Buildroot Association, sponsoring in kind, and
sponsoring Buildroot LTS (through Mind).
This may create a somewhat muddled image so we may need to revisit in
the future how this is formulated.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Although the next commits will also add more information about the LTS
sponsoring in other places on the website, link directly to the landing
page on the Mind website.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The Mind logo changed more than a year ago, it is time to move with the
times and update it on the Buildroot website as well!
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, libsvg fails to build with output:
Applying 0001-fix-expat-static-declaration.patch using patch:
patching file src/svg_parser_expat.c
Hunk #2 FAILED at 44.
1 out of 2 hunks FAILED -- saving rejects to file src/svg_parser_expat.c.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Commit 8f88a644ed "support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0" reduced the fuzz factor.
Due to this change, poke fails to build with output:
Applying 0001-configure.ac-HELP2MAN-replace-by-true-when-cross-com.patch using patch:
patching file configure.ac
Hunk #1 FAILED at 90.
1 out of 1 hunk FAILED -- saving rejects to file configure.ac.rej
This commit refreshes the package patches on the current package
version.
The patch 0002 was described as specific to Buildroot. This commit
adds the "Upstream:" tag and removes the corresponding
".checkpackageignore" entry.
Fixes:
http://autobuild.buildroot.org/results/ace4a0efffb66dcebf873a2baa33b5edfe670093
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, leveldb fails to build with output:
Applying 0002-CMake-install-libmemenv.a.patch using patch:
patching file CMakeLists.txt
Hunk #1 succeeded at 209 (offset 22 lines).
Hunk #2 succeeded at 469 (offset 27 lines).
Hunk #3 FAILED at 495.
1 out of 3 hunks FAILED -- saving rejects to file CMakeLists.txt.rej
Applying 0004-cmake-Use-find_package-to-find-Snappy.patch using patch:
patching file CMakeLists.txt
Hunk #2 FAILED at 34.
Hunk #3 succeeded at 301 (offset 22 lines).
1 out of 3 hunks FAILED -- saving rejects to file CMakeLists.txt.rej
This commit refreshes the package patches on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, libfcgi fails to build with output:
Applying 0001-link-against-math.patch using patch:
patching file libfcgi/Makefile.am
Hunk #1 FAILED at 18.
1 out of 1 hunk FAILED -- saving rejects to file libfcgi/Makefile.am.rej
Applying 0002-disable-examples.patch using patch:
patching file Makefile.am
Hunk #1 FAILED at 4.
1 out of 1 hunk FAILED -- saving rejects to file Makefile.am.rej
This commit refreshes the package patches on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
This introduces the default issue template, to help users provide issues
that are meaningful, and that will help reproduce the issue.
If needed, we can add more templates in the future.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Arnout:
- add link to mailing list;
- rephrase "pristine Buildroot";
- add a checklist item for "I'm using latest commit";
- add a checklist item for "make clean; make";
- add formal items for Buildroot commit sha1 and distro.]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Upstream has changed the archive for the 2.0.7 release since we bumped
in c1f820bd88 (package/daq: bump version to 2.0.7). Comparing the old
archive as it is on s.b.o. with the one currently available on upstream,
gives a few deltas, mostly;
- (C) years changed in comments
- version string changed from 2.0.6 to 2.0.7
- changes (that look legit) to autostuff
- a file dropped (Visual Studio related)
Of course, that means the hashes changed, and no longer match what we
have.
Downloading the file manually and letting wget set the timestamp on it,
reveals the archive is dated 2022-06-08T13:51:59. So, for more than two
years now, we've been relying on the archive we cached on s.b.o.
So, we can't just change the hashes to the new ones, nor can we replace
the archive on s.b.o.
Instead, we use the same trick as was used in c617ebbc97
(package/python-*: fix hashes for cargo-vendored python packages): we
use the actual, real URL with a query parameter as the _SITE, and we set
_SOURCE to a different name so as not to conflict with the previous
archive.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Yoann Congal <yoann.congal@smile.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit 8f88a644ed "support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0" reduced the fuzz factor.
Due to this change, xfsprogs fails to build with output:
Applying 0001-mdrestore-do-not-do-dynamic-linking-of-libtool-libra.patch using patch:
patching file mdrestore/Makefile
Hunk #1 FAILED at 10.
1 out of 1 hunk FAILED -- saving rejects to file mdrestore/Makefile.rej
patching file scrub/Makefile
Hunk #1 FAILED at 70.
1 out of 1 hunk FAILED -- saving rejects to file scrub/Makefile.rej
This commit refreshes the package patches on the current package
version. Note: the patch 0001 file name is changed because it was
regenerated with the "git format-patch" command.
The patch 0001 had an "Upstream:" tag in brackets. The tag was not
detected as such by check-package. This commit updates this tag. The
patch 0002 is also marked with an alternative upstream commit, so it
can be easily dropped at the next bump.
With those changes, the ".checkpackageignore" entries are no longer
needed, so this commit removes those.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The commit fixes the following compilation error:
i686-buildroot-linux-gnu-gcc.br_real: error: unrecognized command-line option ‘-fforce-mem’
From GCC 4.3 release notes [1]:
The -fforce-mem option has been removed because it has had no effect
in the last few GCC releases.
[1] https://gcc.gnu.org/gcc-4.3/changes.html
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, libmad fails to build with output:
Applying mips-gcc4.4.diff using series:
patching file fixed.h
Hunk #1 FAILED at 297.
1 out of 1 hunk FAILED -- saving rejects to file fixed.h.rej
The package applied the patches in two steps, first the local ones and
then the official ones downloaded from the repository. The commit fixes
the issue by reversing the order of patch application steps.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, sdl_mixer fails to build with output:
Applying 0002-configure__set_macro_directory.patch using patch:
patching file configure.ac
Hunk #1 FAILED at 2.
1 out of 1 hunk FAILED -- saving rejects to file configure.ac.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, libnfs fails to build with output:
Applying 0001-Fix-include-sys-time.h.patch using patch:
patching file include/nfsc/libnfs.h
Hunk #1 FAILED at 24.
1 out of 1 hunk FAILED -- saving rejects to file include/nfsc/libnfs.h.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, libhid fails to build with output:
Applying 0003-uclinux.patch using patch:
patching file configure.ac
Hunk #1 FAILED at 80.
1 out of 1 hunk FAILED -- saving rejects to file configure.ac.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
In OpenSSH 9.8 the server is split into two processes: sshd and
sshd-session which results in the following error, when trying
to start sshd:
Starting sshd: /usr/libexec/sshd-session does not exist or is not executable
This patch installs the sshd-session binary.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/issues/11
Fixes: 4ac2cc5bee
Signed-off-by: Niklas Yann Wettengel <niyawe@niyawe.de>
Reviewed-by: Nevo Hed <nhed+buildroot@starry.com>
Tested-by: Fiona Klute (WIWA) <fiona.klute@gmx.de>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, imx-kobs fails to build with output:
Applying 0001-Fix-musl-build.patch using patch:
patching file src/mtd.c
Hunk #1 FAILED at 31.
1 out of 1 hunk FAILED -- saving rejects to file src/mtd.c.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, freerdp fails to build with output:
Applying 0001-Fix-variable-declaration-in-loop.patch using patch:
patching file client/X11/xf_graphics.c
Hunk #1 FAILED at 386.
Hunk #2 succeeded at 456 (offset 61 lines).
1 out of 2 hunks FAILED -- saving rejects to file client/X11/xf_graphics.c.rej
Applying 0002-Fixed-variable-declaration-in-loop.patch using patch:
patching file client/X11/xf_graphics.c
Hunk #1 succeeded at 246 (offset 6 lines).
Hunk #2 FAILED at 255.
1 out of 2 hunks FAILED -- saving rejects to file client/X11/xf_graphics.c.rej
This commit refreshes the package patches on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, ficl fails to build with output:
Applying 0002-Makefile.linux-pass-LDFLAGS.patch using patch:
patching file Makefile.linux
Hunk #1 FAILED at 14.
1 out of 1 hunk FAILED -- saving rejects to file Makefile.linux.rej
This commit refreshes the package patch on the current package version.
While we're at it, fix the usage of the Upstream: tag and update
.checkpackageignore accordingly.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, flite fails to build with output:
Applying 0001-fix-alsa-static.patch using patch:
patching file configure.in
Hunk #1 FAILED at 275.
1 out of 1 hunk FAILED -- saving rejects to file configure.in.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, theora fails to build with output:
Applying 0002-fix-autoreconf.patch using patch:
patching file Makefile.am
Hunk #1 FAILED at 4.
1 out of 1 hunk FAILED -- saving rejects to file Makefile.am.rej
patching file configure.ac
Hunk #1 FAILED at 68.
1 out of 1 hunk FAILED -- saving rejects to file configure.ac.rej
This commit refreshes the package patch on the current package version.
While we're at it, fix the usage of the Upstream: tag and update
.checkpackageignore accordingly.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Migrate from setuptools to flit build backend.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit 8f88a644ed ("support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0") reduced the fuzz factor.
Due to this change, gpm fails to build with output:
Applying 0003-src-Makefile.in-Really-install-unversioned-solibrary.patch using patch:
patching file src/Makefile.in
Hunk #1 FAILED at 115.
1 out of 1 hunk FAILED -- saving rejects to file src/Makefile.in.rej
This commit refreshes the package patch on the current package version.
While we're at it, change to use a proper Upstream: tag and remove from
.checkpackageignore.
Fixes: 8f88a644ed
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Fixes CVE-2024-6387: Unauthenticated root login because of signal
handler race condition.
Drop upstream patch and autoreconf.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit 8f88a644ed "support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0" reduced the fuzz factor.
Due to this change, libsoup fails to build with output:
Applying 0001-meson.build-set-c_std-to-gnu99.patch using patch:
patching file meson.build
Hunk #1 FAILED at 2.
This commit fixes the set c_std to gnu99 patch so that it applies.
Fixes:
http://autobuild.buildroot.net/results/4ee/4ee68145143df02c46034b4ca291fea469a6f58a
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit 8f88a644ed "support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0" reduced the fuzz factor.
Due to this change, libblockdev fails to build with output:
Applying 0001-Provide-replacement-function-for-strerror_l.patch using patch:
patching file configure.ac
patching file src/utils/module.c
Hunk #1 FAILED at 28.
This commit fixes the Provide replacement function for strerror_l()
patch so that it applies.
Fixes:
http://autobuild.buildroot.net/results/df5/df54118cc7057ba8dd566515281b77c49a596a04
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit 8f88a644ed "support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0" reduced the fuzz factor.
Due to this change, sylpheed fails to build with output:
Applying 0001-harden-link-checker-before-accepting-click.patch using patch:
patching file src/textview.c
Hunk #1 FAILED at 2885.
Hunk #2 FAILED at 2922.
2 out of 2 hunks FAILED -- saving rejects to file src/textview.c.rej
This commit refreshes the package patch on the current package version.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 8f88a644ed "support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0" reduced the fuzz factor.
Due to this change, rt-tests fails to build with output:
Applying 0001-Fix-a-build-issue-with-uClibc-ng.patch using patch:
patching file src/cyclictest/cyclictest.c
Hunk #1 FAILED at 58.
1 out of 1 hunk FAILED -- saving rejects to file src/cyclictest/cyclictest.c.rej
This commit refreshes the package patches on the current package version.
The patch 0002 had an "Upstream:" tag in brackets. The tag was not
detected as such by check-package. This commit removes those brackets
and also removes the ".checkpackageignore" entry.
Fixes:
http://autobuild.buildroot.org/results/3e0a3b8d8c42d8e82ecf47b80bca875de739af5b
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 8f88a644ed "support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0" reduced the fuzz factor.
Due to this change, host-clang fails to build with output:
Applying 0001-lib-Driver-ToolChains-Gnu-Use-GCC_INSTALL_PREFIX-in-.patch using patch:
patching file lib/Driver/ToolChains/Gnu.cpp
Hunk #1 FAILED at 1725.
Hunk #2 succeeded at 2011 (offset 277 lines).
1 out of 2 hunks FAILED -- saving rejects to file lib/Driver/ToolChains/Gnu.cpp.rej
Rebase the patch to fix the problem.
Fixes:
http://autobuild.buildroot.net/results/75b/75baa62275d64c699d9757f7c756fc03ea717877/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Correct the spelling of the word 'there' in the comment.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Important upstream changes:
* Support for Python 3.12 has been added (in 7.0.0).
* Websocket support is no longer included by default, and thus the
dependency on "websocket-client" (since 7.0.0).
* Build has been switched to hatchling and hatch-vcs (in 7.1.0), so
Buildroot needs to use pep517 build.
* Dependency on "packaging" has been removed (in 7.1.0).
Upstream changelogs:
https://github.com/docker/docker-py/releases/tag/7.0.0https://github.com/docker/docker-py/releases/tag/7.1.0
Signed-off-by: Fiona Klute <fiona.klute+wiwa@gmx.de>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The upstream site for cgic is now a parking/phishing site, so we can't
download cgic anymore.
The last version was 2.07, released 7 years ago, and nothing uses cgic
in Buildroot.
Drop the package.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: David Bender <codehero@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This patch reduces the xilinx-prebuilt package to a single install variable
that changes depending on device family variant.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit 8f88a644ed "support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0" reduced the fuzz factor.
Due to this change, sox fails to build with output:
Applying 0001-uclibc.patch using patch:
patching file src/formats.c
Hunk #1 FAILED at 409.
Hunk #2 succeeded at 477 (offset 60 lines).
1 out of 2 hunks FAILED -- saving rejects to file src/formats.c.rej
This commit refreshes the package patch on the current package version.
Note 1: the failing patch 0001 was regenerated with "git format-patch".
Since the patch file 0001 name changed in the regeneration, the
".checkpackageignore" entry is also updated accordingly.
Note 2: patch 0002 did not require any update.
Fixes:
http://autobuild.buildroot.org/results/1bc396386aa3321fe48101caf9635ae41feb057b
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 8f88a644ed "support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0" reduced the fuzz factor.
Due to this change, eigen fails to build with output:
Applying 0001-Adds-new-CMake-Options-for-controlling-build-components.patch using patch:
patching file CMakeLists.txt
Hunk #1 succeeded at 495 (offset 18 lines).
Hunk #2 succeeded at 615 (offset 1 line).
Hunk #3 succeeded at 652 (offset -8 lines).
patching file blas/CMakeLists.txt
patching file lapack/CMakeLists.txt
Hunk #1 FAILED at 1.
Hunk #2 succeeded at 450 (offset -7 lines).
1 out of 2 hunks FAILED -- saving rejects to file lapack/CMakeLists.txt.rej
This commit refreshes the package patch on the current package version.
Since the patch file name changed in the regeneration, the
".checkpackageignore" entry is updated accordingly.
Fixes:
http://autobuild.buildroot.org/results/6fd059b4e7f83a38683341ea1ea02e13d1a92449
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 8f88a644ed "support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0" reduced the fuzz factor.
Due to this change, crda fails to build with output:
Applying 0001-crda-support-python-3-in-utils-key2pub.py.patch using patch:
patching file Makefile
Hunk #1 FAILED at 112.
1 out of 1 hunk FAILED -- saving rejects to file Makefile.rej
Rebase patch to fix the problem, problem was not yet caught by
autobuilders.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 8f88a644ed "support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0" reduced the fuzz factor.
Due to this change, libyuv fails to build with output:
Applying 0001-i386-sse2.patch using patch:
patching file include/libyuv/scale_row.h
Hunk #1 FAILED at 33.
1 out of 1 hunk FAILED -- saving rejects to file include/libyuv/scale_row.h.rej
Rebase the patch to fix the problem.
Fixes:
http://autobuild.buildroot.net/results/8ca446ee4bd657a661894dec66f45aa02b6a7325/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Make sure that
/0002-Remove-sys-sysctl.h-and-add-missing-libgen.h-include.patch applies
cleanly without any fuzz by refreshing it.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Yann E. MORIN <yann.morin@orange.com>
Reviewed-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 8f88a644ed "support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0" reduced the fuzz factor.
Due to this change, rrdtool fails to build with output:
patching file src/rrd_tool.c
Hunk #2 FAILED at 42.
Hunk #3 succeeded at 435 (offset -8 lines).
Hunk #4 succeeded at 518 (offset -8 lines).
Hunk #5 succeeded at 564 (offset -8 lines).
Hunk #6 succeeded at 879 (offset -8 lines).
1 out of 6 hunks FAILED -- saving rejects to file src/rrd_tool.c.rej
Because this was caused by an upstream patch we do not change it but add
another upstream patch to be applied before our current patch to avoid
the problem.
Fixes:
http://autobuild.buildroot.net/results/6996dbd764b0066da49dd009f1385196342c89dc/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Reviewed-by: Yann E. MORIN <yann.morin@orange.com>
Tested-by: Yann E. MORIN <yann.morin@orange.com>
[yann.morin.1998@free.fr:
- add comment as suggested by yann.morin@orange.com
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 8f88a644ed "support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0" reduced the fuzz factor.
Due to this change, exim fails to build with output:
Applying 0004-exim_lock-fix-lstat-related-build-errors.patch using patch:
patching file src/exim_lock.c
Hunk #1 FAILED at 13.
Hunk #2 succeeded at 27 (offset 1 line).
1 out of 2 hunks FAILED -- saving rejects to file src/exim_lock.c.rej
This commit rebases the package patches on the current package version
when needed.
Fixes:
http://autobuild.buildroot.net/results/ff27d5ebd7f24ac8cb236b83c67c2c75255e51c6/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Yann E. MORIN <yann.morin@orange.com>
Tested-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 8f88a644ed "support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0" reduced the fuzz factor.
Due to this change, libgsm fails to build with output:
Applying 0001-misc-fixes-from-archlinux.patch using patch:
patching file Makefile
Hunk #2 FAILED at 96.
Hunk #7 FAILED at 424.
2 out of 8 hunks FAILED -- saving rejects to file Makefile.rej
This commit refreshes the package patch on the current package version.
Fixes:
- http://autobuild.buildroot.org/results/b27/b271ade6069fd25c1877e1e74648d92e88c459c4
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 8f88a644ed "support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0" reduced the fuzz factor.
Due to this change, asterisk fails to build with output:
Applying 0004-install-samples-need-the-data-files.patch using patch:
patching file Makefile
Hunk #1 FAILED at 779.
1 out of 1 hunk FAILED -- saving rejects to file Makefile.rej
This commit rebase the package patches on the current package version.
Note: the patch 0005 is unchanged, as it is correct in its current
state.
Fixes:
- http://autobuild.buildroot.org/results/92d/92d58ecb67f11a6eb74695bc1efcc672f69a57a9
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The conversion to cmake was supposed to be an RFC, and was not supposed
to be applied [0], as the cmake support is not yet complete, while the
autotools buildsystem is still functional [1].
The host-xz uses the target options, which is plain wrong. The target
options forcubly disable shared libraries for no apparent reason, which
causes the host build to also disable shared libs, which in turn causes
host-python3 to fails to build. host-python3 has no dependency on
host-xz, but it autodetects its presence, so if the build order caused
host-xz to be built before host-python3, its presence will be detected
(this needs to be fixed in host-python3 anyway, though) [2].
It also creates build issues in our reference envirnoment [3]
Finally, there was a typo in the CXX override:
-DCMAKE_CXX_COMPILER_LAUNCHER==""
This reverts commit 3f464c2e28.
Fixes: #5
[0] https://lore.kernel.org/buildroot/20240626103623.7d7412c0@gmx.net/
[1] https://tukaani.org/xz/#_building_from_xz_git
[2] https://gitlab.com/buildroot.org/buildroot/-/issues/5
[3] https://lore.kernel.org/buildroot/ZnqUPBAcDbB7ND64@tl-lnx-nyma7486-2/
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since commit 8f88a644ed (support/scripts/apply-patches.sh: set the
maximum fuzz factor to 0), we no longer accept fuzz in patches. Before
8f88a644ed was applied, alot of patches were fixed in preparatory
commits, but slang was missed (although the patch has been present since
2017.
Fix the fuzz:
- leading TABs in Makefile commands
- fix context
Fixes: 8f88a644ed
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 8f88a644ed "support/scripts/apply-patches.sh: set the maximum
fuzz factor to 0" reduced the fuzz factor.
Due to this change, host-riscv-isa-sim fail to build with output:
Applying 0001-riscv-disable-precompiled-headers.patch using patch:
patching file riscv/riscv.mk.in
Hunk #1 FAILED at 35.
1 out of 1 hunk FAILED -- saving rejects to file riscv/riscv.mk.in.rej
This commit rebased the package patch on the package version, bumped in
commit 853b7661bf "package/riscv-isa-sim: bump to git version
00dfa28cd7".
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch was created as a fix to a problem that occurred during the
compilation of QEMU:
>>> qemu 8.1.1 Patching
Applying 0001-tests-fp-disable-fp-bench-build-by-default.patch using patch:
patching file tests/fp/meson.build
Hunk #1 succeeded at 138 with fuzz 2 (offset -502 lines).
Applying 0002-softmmu-qemu-seccomp.c-add-missing-header-for-CLONE_.patch using patch:
patching file softmmu/qemu-seccomp.c
Applying 0004-tracing-install-trace-events-file-only-if-necessary.patch using patch:
patching file trace/meson.build
With the bump to version 8.1.1, the patch that disabled the compilation
of the fp-bench test does not report any errors, even though the patch
itself is no longer applicable. The only noticeable message is:
"Hunk #1 succeeded at 138 with fuzz 2 (offset -502 lines)."
As reported by the patch man page:
"With context diffs, and to a lesser extent with normal diffs, patch can
detect when the line numbers mentioned in the patch are incorrect, and
attempts to find the correct place to apply each hunk of the patch.
As a first guess, it takes the line number mentioned for the hunk, plus
or minus any offset used in applying the previous hunk. If that is not
the correct place, patch scans both forwards and backwards for a set of
lines matching the context given in the hunk. First patch looks for a
place where all lines of the context match. If no such place is found,
and it's a context diff, and the maximum fuzz factor is set to 1 or more,
then another scan takes place ignoring the first and last line of
context. If that fails, and the maximum fuzz factor is set to 2 or more,
the first two and last two lines of context are ignored, and another
scan is made. The default maximum fuzz factor is 2.
If the hunk is installed at a different line from the line number
specified in the diff, you are told the offset. A single large offset
may indicate that a hunk was installed in the wrong place. You are also
told if a fuzz factor was used to make the match, in which case you
should also be slightly suspicious."
By setting the maximum fuzz factor to 0, we avoid that patches which
cannot be applied are incorrectly reported as valid, with positive
side-effects on version bumps.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This commit allows the package patches to be applied with fuzz factor 0.
The fuzz factor specifies how many lines of the patch can be inexactly
matched, so the value 0 requires all lines to be exactly matched.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This commit allows the package patches to be applied with fuzz factor 0.
The fuzz factor specifies how many lines of the patch can be inexactly
matched, so the value 0 requires all lines to be exactly matched.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This commit allows the package patches to be applied with fuzz factor 0.
The fuzz factor specifies how many lines of the patch can be inexactly
matched, so the value 0 requires all lines to be exactly matched.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This commit allows the package patch to be applied with fuzz factor 0.
The fuzz factor specifies how many lines of the patch can be inexactly
matched, so the value 0 requires all lines to be exactly matched.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This commit allows the package patch to be applied with fuzz factor 0.
The fuzz factor specifies how many lines of the patch can be inexactly
matched, so the value 0 requires all lines to be exactly matched.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This commit allows the package patches to be applied with fuzz factor 0.
The fuzz factor specifies how many lines of the patch can be inexactly
matched, so the value 0 requires all lines to be exactly matched.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This commit allows the package patch to be applied with fuzz factor 0.
The fuzz factor specifies how many lines of the patch can be inexactly
matched, so the value 0 requires all lines to be exactly matched.
While we're at it, also fix the upstream status to the proper Upstream:
tag.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[Arnout: add proper Upstream: tag and update checkpackageignore]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This commit allows the package patches to be applied with fuzz factor 0.
The fuzz factor specifies how many lines of the patch can be inexactly
matched, so the value 0 requires all lines to be exactly matched.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This commit allows the package patch to be applied with fuzz factor 0.
The fuzz factor specifies how many lines of the patch can be inexactly
matched, so the value 0 requires all lines to be exactly matched.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This commit allows the package patches to be applied with fuzz factor 0.
The fuzz factor specifies how many lines of the patch can be inexactly
matched, so the value 0 requires all lines to be exactly matched.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This commit allows the package patches to be applied with fuzz factor 0.
The fuzz factor specifies how many lines of the patch can be inexactly
matched, so the value 0 requires all lines to be exactly matched.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This commit allows the package patches to be applied with fuzz factor 0.
The fuzz factor specifies how many lines of the patch can be inexactly
matched, so the value 0 requires all lines to be exactly matched.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This commit allows the package patches to be applied with fuzz factor 0.
The fuzz factor specifies how many lines of the patch can be inexactly
matched, so the value 0 requires all lines to be exactly matched.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This commit allows the package patch to be applied with fuzz factor 0.
The fuzz factor specifies how many lines of the patch can be inexactly
matched, so the value 0 requires all lines to be exactly matched.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This commit allows the syslinux patches to be applied with fuzz factor 0.
The fuzz factor specifies how many lines of the patch can be inexactly
matched, so the value 0 requires all lines to be exactly matched.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This commit allows the U-Boot patch to be applied with fuzz factor 0.
The fuzz factor specifies how many lines of the patch can be inexactly
matched, so the value 0 requires all lines to be exactly matched.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This commit allows the Linux kernel patches to be applied with fuzz
factor 0. The fuzz factor specifies how many lines of the patch can be
inexactly matched, so the value 0 requires all lines to be exactly
matched.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Use direct equivalents where available. The following autoconf options
don't have a direct equivalent in CMakeLists.txt.
- '--enable-checks=crc32': CRC32 is always enabled; the equivalent CMake
option is therefore calles ADDITIONAL_CHECK_TYPES.
- '--disable-external-sha256': external sha256 is not supported with
CMake.
- '--enable-assembler': No direct equivalent, though there is an option
ENABLE_X86_ASM which must be enabled explicitly (no auto-detection).
Since this only works on x86 and we're not sure if it works on all x86
variants, leave it disabled.
- '--enable-assume-ram=128': hard coded in the CMakeLists.txt file
1732 target_compile_definitions(xz PRIVATE ASSUME_RAM=128)
- '--enable-xz', '--enable-xzdec', '--enable-lzmadec',
'--enable-lzmainfo', --enable-lzma-links': The decoder programs are
always enabled if they're enabled in the library. The symlinks are
controlled by two separate options: CREATE_XZ_SYMLINKS and
CREATE_LZMA_SYMLINKS.
- '--enable-scripts' (see [1]: 'CMake: xzdiff, xzgrep, xzless, xzmore, and
their symlinks are now installed')
- '--enable-symbol-versions': hard coded in the CMakeLists.txt file
1297 target_compile_definitions(liblzma PRIVATE HAVE_SYMBOL_VERSIONS_LINUX=1)
- '--enable-rpath': There is no CMake equivalent for this.
- '--enable-largefile': see CMakeLists.txt
245 # Check for large file support. It's required on some 32-bit platforms and
246 # even on 64-bit MinGW-w64 to get 64-bit off_t. This can be forced off on
247 # the CMake command line if needed: -DLARGE_FILE_SUPPORT=OFF
248 tuklib_large_file_support(ALL)
- '--enable-unaligned-access=auto': see CMakeLists.txt and cmake/tuklib_integer.cmake
250 # This is needed by liblzma and xz.
251 tuklib_integer(ALL)
- '--disable-unsafe-type-punning' see CMakeLists.txt and cmake/tuklib_integer.cmake
250 # This is needed by liblzma and xz.
251 tuklib_integer(ALL)
- '--disable-werror': There is no option to _enable_ -Werror in
CMakeLists.txt.
- '--enable-year2038': There is no option to enable Y2038 support in
CMakeLists.txt, but we anyway do that globally.
host-xz is itself a dependency of host-ccache, so we can't use ccache
for building host-xz. For autotools, this was handled by setting CC and
CXX in the environment for the configure script. This doesn't work for
CMake, however. Instead, we must override the CMAKE_C_COMPILER_LAUNCHER
option. Xz doesn't use C++, but for completeness also override
CMAKE_CXX_COMPILER_LAUNCHER.
[1] https://github.com/tukaani-project/xz/releases/tag/v5.6.0
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Arnout: fix ccache bypass for host-xz]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
All our up-to-date libc variants now support Y2038, so we can turn this
on unconditionally.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Explicitly specify all autoconf options with their default values, with
the following special cases:
- sandbox: use 'auto' (which will compile detect landlock in case
kernel headers >= 5.13)
- unaligned-access: use 'auto' (which will default to yes for x86, x86-64,
powerpc, powerpc64 and powcerpc64le and use compile detection for arm,
aarch64 and riscv, see xz-5.6.0/configure line 21323 ff)
Since there are so many options, we reuse the target options for the
host. The options that are set dynamically need to be explicitly
overridden in that case.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Arnout:
- fix type Z_CONF_OPTS, detected by check-package;
- move setting of HOST_XZ_CONF_OPTS after all the target options.]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The toolchain is needed to build the final-stage go compiler, when it
should have CGO support.
However, in commit 0290c543de (package/go: new subdirectory for go
variants), the HOST_GO_DEPENDENCIES assignment was only partially split
off to the new location; part of it was left in the ole go.mk to act as
common variables. With that commit, the go package had not been renamed,
which meant that the dependencies were still correct.
But in commit fa2536ec94 (package/go: make host package a virtual
package), the 'go' package was renamed to 'go-src', and replaced by a
'go' virtual package.
The variables in the go-src package were properly renamed, and the
variables in the go virtual package were properly _not_ renamed. As a
consequence, the go-src package lost its dependency on the toolchain
when needed, while the go virtual package still had it.
However, that was not correct when CGO is enabled (i.e. when the target
has threads): go-src then fails to build:
Building Go cmd/dist using [...]/host/lib/go-1.21.8. (go1.21.8 linux/amd64)
go tool dist: cannot invoke C compiler ["[...]/host/bin/aarch64-linux-gcc"]:
fork/exec [...]/host/bin/aarch64-linux-gcc: no such file or directory
Go needs a system C compiler for use with cgo.
To set a C compiler, set CC=the-compiler.
To disable cgo, set CGO_ENABLED=0.
After some retro-thinking, the reasoning behind this was that the
toolchain would _also_ be needed when using the prebuilt go-bin, which
is indeed correct, so by having it as a dependency of the virtual
package, it would ensure the toolchain be present in both cases, when
building from scratch or when using a prebuilt go.
The oversight being that the toolchain is _also_ needed to actually
build go when CGO is enabled.
We fix this by handling the toolchain dependency for CGO by exposing it
in a variable, that can be used as a dependency in go-src, like is done
to actually enable or disable CGO support.
We still ensure that host-go still depends on it, for a future go-bin
provider.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Even though the "no-engine" option effectively disables the compilation
of the engine, it still creates the installation directory, which ends up
being empty. For this reason, the patch does not remove the hook for
removing the directory if the BR2_PACKAGE_LIBOPENSSL_ENGINES option is
not enabled.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
With version 3.2.0 of OpenSSL, the "no-apps" configuration option was
added, which does not build apps, e.g. the openssl program. This is
handy for minimization. This option also disables tests.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The patch expresses the same condition in positive logic, consistent
with what has been coded in other parts of the module and generally
in Buildroot.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The bump to version 3.0.9 in commit 3c66f65a6a (package/libopenssl:
bump version to 3.0.9), and all subsequent updates, forgot to change
the directory name, which remained that of version 1.1. The patch
fixes the directory name to be consistent with the version.
In the case the library was not built with engine support, this resulted
in the presence of files in the root file system that should have been
removed.
Fixes: 3c66f65a6a
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit f77d698f83 changed apply-patches to
use $TAR instead of `tar`, but did not define a fallback if $TAR is not
defined. This results in an error when calling apply-patches.sh from
outside Buildroot's Makefile. Our team uses this script to setup local
checkouts of Buildroot package's with patches for development.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From the release notes:
================================================================================
Redis 7.2.5 Released Thu 16 May 2024 12:00:00 IST
================================================================================
Upgrade urgency MODERATE: Program an upgrade of the server, but it's not urgent.
Bug fixes
=========
* A single shard cluster leaves failed replicas in CLUSTER SLOTS instead of removing them (#12824)
* Crash in LSET command when replacing small items and exceeding 4GB (#12955)
* Blocking commands timeout is reset due to re-processing command (#13004)
* Conversion of numbers in Lua args to redis args can fail. Bug introduced in 7.2.0 (#13115)
Bug fixes in CLI tools
======================
* redis-cli: --count (for --scan, --bigkeys, etc) was ignored unless --pattern was also used (#13092)
* redis-check-aof: incorrectly considering data in manifest format as MP-AOF (#12958)
Signed-off-by: Titouan Christophe <titouanchristophe@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Upstream notes that libhttp-parser is unmaintained and suggest llhttp
as a replacement. This version bundles llhttp (and includes its license
in COPYING) but still allows to use a system-provided libhttp-parser.
llhttp (https://github.com/nodejs/llhttp) is a C library that depends on
a nodejs interpreter and more than 10 npm dependencies to generate its
parser code. The bundled version contains the generated sources and
could be built without nodejs. But distributing this generated code
as part of libgit2 would probably be legally dubious because of the
GPL's original source code provision, even if llhttp is MIT-licensed.
Packaging llhttp would be a daunting task and its build will require
considerable time and space, so for now, keep using libhttp-parser.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Switch to the skiffos fork as the upstream is not maintained.
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This version adds support up to Linux version 6.9.1.
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Along with the version bump, a number of the patches have been dropped
or reworked.
Compiled shared module builds are now disabled via py_cv_module_* = n/a
when possible (see PY_STDLIB_MOD_SET_NA). Leveraging this method allows
dropping numerous patches.
Note: this method does not work when access to a compiled module is
wrapped by a python-based module such as sqlite, tkinter, etc. In these
cases, configure knobs are still required to disable these modules and
their wrappers.
Both setup.py and distutils are no longer utilized upstream, so patches
have been dropped or adjusted accordingly.
Patch 0007 has been dropped, the Xtensa architecture can avoid compile
errors by using a toolchain with kernel headers newer than 3.17 [0].
That would require a new, non-trivial dependency to be added, but it
would also need to be propagated to all packages that select python3; as
we consider xtensa with old headers to be a corner case, we decide to
not address the issue, and rather add an exclusion in genrandconfig to
avoid the issue in autobuilders.
Patch 0026 has been dropped, the issue is fixed in uClibc v1.0.37+ [1].
Note: uClibc is not generally supported by upstream CPython.
While we're making assumptions about uClibc, ac_cv_func_wcsftime=no is
no longer set as it was fixed in v1.0.0 [2].
Co-developed-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Co-developed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[See 36e635d2d5]
Co-developed-by: Roy Kollen Svendsen <roy.kollen.svendsen@akersolutions.com>
[See 687b96db4d]
[0]: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f61bf8e7d19e0a3456a7a9ed97c399e4353698dc
[1]: https://cgit.uclibc-ng.org/cgi/cgit/uclibc-ng.git/commit/libcrypt/crypt.c?id=2f6076cdaada2132b670b5ef25ad80c76a916c5a
[2]: https://lists.uclibc.org/pipermail/uclibc/2014-November/048723.html
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
[yann.morin.1998@free.fr;
- extend the commit log for the xtensa headers case
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Backport an upstream patch to fix a build error with python 3.12 (imp
module not longer available).
Enable SSL in host-python when the admin panel is enabled: web2py will
wnt to generate a password, and uses pydal for that, which in turns uses
hashlib.pbkdf2_hmac(). Until python 3.11, there was a pure-python
fallback for when python was built without openssl; with 3.12, that
fallback was removed, so opensll is now required.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When we update the rust version, we need to update a large list of
hashes for rust-bin, and update the hash for rust (source). This is very
tedious and very error-prone.
Add a helper script that generates the hash files automatically, and
also iupdate the _VERSION in the .mk.
We decided not to carry the hint about the verification of the tarballs
against the upstream GPG signature for three reasons:
- it requires that all the tarballs be downloaded, which can take
quite some time;
- the hash files are available for all the needed archives;
- the hash files are downloaded over https, so if someone managed to
get a hold of the rust server to provide backdoored archives, they
can also change the hash files;
- properly verifying the archives would require a chain of trust
between the person running the upsate script, and the rust GPG key,
which is not a given, and verifying sigantures using an unverified
key is not providing much security, if at all.
Regenerate the hash files with that script.
Note (for the future, maybe): there are manifest files for each release,
https:/static.rust-lang.org/dist/channel-rust-VERSION.toml, that we
could use to generate the RUST_HOSTS and RUST_TARGETS list. However,
adding new hosts or new targets implies updating the corresponding
_ARCH_SUPPORTS and accompanying symbols, so better leave that to a
manual operation, at least for now.
Notes: Many thanks to James for providing an initial script with the
same purpose. Given the feedback from previous reviews, it was simpler
to rewrite it from scratch; it should now be much, much simpler.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: James Hilliard <james.hilliard1@gmail.com>
Tested-by: James Hilliard <james.hilliard1@gmail.com>
When xilinx pre-built was added in a6648ad8da (boot/xilinx-prebuilt:
new boot package), the hash file was initially a board-specific hash
file. However, that hash file, in commit a6648ad8da, really belonged
to the xilinx-prebuilt package, for two reasons: the package needs a
hash file for the version it installs, and no defconfig was using it
at that time. So the hash file was moved out of the boar directory,
and into the package directory when the patch was applied.
When the xilinx-related boards were changed to use xilinx-prebuilt, in
551ba16a0f (configs/zynqmp_*: migrate to xilinx-prebuilt) and 8271323649
(configs/versal_vck190_defconfig: migrate to xilinx-prebuilt), they were
correctly made to use a custom, non-default version. But then, it meant
that those defconfig would no longer have a hash when we would bump the
default version in xilinx-prebuilt.
Re-add the initial board-specific hash file now that it is required.
Fixes: 551ba16a0f
Fixes: 8271323649
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Neal Frager <neal.frager@amd.com>
Reviewed-by: Neal Frager <neal.frager@amd.com>
Commit fa2536ec94 (package/go: make host package a virtual package)
introduced host-go as a host-only virtual package, which had a single
provider, the choice of which is only exposed when a (target or host)
package has selected BR2_PACKAGE_HOST_GO to indicate it needs host-go.
However, this forgot to account for prompt-less, host-only packages,
which have no way of selecting that symbol.
Having prompt-less, host-only packages is a totally unexceptional,
supported case; for example a host package can be depended upon by
another (target or host) package, or by a filesystem, and we do not
require Kconfig symbols to be exposed for those packages.
As a consequence, when not package is enabled, that can select that
symbol, we can't run 'make source' or 'make host-foo-source':
make[1]: *** No rule to make target 'host-', needed by
'[...]/build/host-go-1.22.4/.stamp_configured'. Stop.
Fix that by moving the provider symbol out of the if-block, so that
there is always a provider defined.
Now, we only have host-go-src as a provider, but the symbol is still
part of the choice that is conditional (and that _has_ to be
conditional), so the BR2_PACKAGE_HOST_GO_SRC can never be set unless
there is a package that explicitly select BR2_PACKAGE_HOST_GO.
So, drop the conditional on the default, so that there is always a
provider available.
This mirrors other similar situations, like the rust case.
Fixes: fa2536ec94
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
LGTM: Arnout Vandecappelle (Essensium/Mind) (on IRC) <arnout@mind.be>
The patch was added in commit 25991c843c (package/go-bootstrap-stage3:
fix go-bootstrap when parent dir contains invalid .git). Then all the
go-compiler packages were moved to a common sub-directory, in commit
0290c543de (package/go: new subdirectory for go variants).
However, the patch for commit 0290c543de was sent to the mailing list
before 25991c843c was applied, so it could not have moved a file that
was only added later.
Move that file, now.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Perale <thomas.perale@mind.be>
Cc: Romain Naour <romain.naour@smile.fr>
0001-nano.patch: both MOD_NANO and MOD_TAI were added to glibc 2.12
on 2011-03-30 in commit 83fe108b0a9bc4f2deb14695bb0c8b2011e79f28.
They were added to musl 0.7.5 in commit f5ba2bc9c on 2011-03-18. And
they were added to uClibc 1.0.23 in commit 2d8ea0524b on 2017-03-17. We
consider all of these old enough to assume they always exist.
Renumber the remaining patches.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Every golang package must select the host-go package. This will allow
the user to select the Go compiler variant (build from source or
pre-built).
The same pattern is used for Rust packages.
This was done for all golang packages in commit
58a291470a, but qbee-agent was missed.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Indeed libiio dependency must be activated.
This used to be an external package but is now included in gnuradio
itself.
Signed-off-by: Jean-Michel Friedt <jmfriedt@femto-st.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Fixes the following security issues:
GLIBC-SA-2024-0004:
ISO-2022-CN-EXT: fix out-of-bound writes when writing escape
sequence (CVE-2024-2961)
GLIBC-SA-2024-0005:
nscd: Stack-based buffer overflow in netgroup cache (CVE-2024-33599)
GLIBC-SA-2024-0006:
nscd: Null pointer crash after notfound response (CVE-2024-33600)
GLIBC-SA-2024-0007:
nscd: netgroup cache may terminate daemon on memory allocation
failure (CVE-2024-33601)
GLIBC-SA-2024-0008:
nscd: netgroup cache assumes NSS callback uses in-buffer strings
(CVE-2024-33602)
In addition, the following bugs are fixed:
[19622] network: Support aliasing with struct sockaddr
[30701] time: getutxent misbehaves on 32-bit x86 when _TIME_BITS=64
[30994] REP MOVSB performance suffers from page aliasing on Zen 4
[31339] libc: arm32 loader crash after cleanup in 2.36
[31325] mips: clone3 is wrong for o32
[31335] math: Compile glibc with -march=x86-64-v3 should disable FMA4
multi-arch version
[31402] libc: clone (NULL, NULL, ...) clobbers %r7 register on
s390{,x}
[31479] libc: Missing #include <sys/rseq.h> in sched_getcpu.c may
result in a loss of rseq acceleration
[31316] build: Fails test misc/tst-dirname "Didn't expect signal from
child: got `Illegal instruction'" on non SSE CPUs
[31371] x86-64: APX and Tile registers aren't preserved in ld.so
trampoline
[31372] dynamic-link: _dl_tlsdesc_dynamic doesn't preserve all caller-
saved registers
[31429] build: Glibc failed to build with -march=x86-64-v3
[31501] dynamic-link: _dl_tlsdesc_dynamic_xsavec may clobber %rbx
[31640] dynamic-link: POWER10 ld.so crashes in
elf_machine_load_address with GCC 14
[31676] Configuring with CC="gcc -march=x86-64-v3"
--with-rtld-early-cflags=-march=x86-64 results in linker failure
[31677] nscd: nscd: netgroup cache: invalid memcpy under low
memory/storage conditions
[31678] nscd: nscd: Null pointer dereferences after failed netgroup
cache insertion
[31679] nscd: nscd: netgroup cache may terminate daemon on memory
allocation failure
[31680] nscd: nscd: netgroup cache assumes NSS callback uses in-buffer
strings
[31686] dynamic-link: Stack-based buffer overflow in
parse_tunables_string
[31719] dynamic-link: --enable-hardcoded-path-in-tests doesn't work
with -Wl,--enable-new-dtags
[31782] Test build failure with recent GCC trunk
(x86/tst-cpu-features-supports.c:69:3: error: parameter to builtin
not valid: avx5124fmaps)
[31798] pidfd_getpid.c is miscompiled by GCC 6.4
[31867] build: "CPU ISA level is lower than required" on SSE2-free
CPUs
[31883] build: ISA level support configure check relies on bashism /
is otherwise broken for arithmetic
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit b5680f53d6 (package/glibc: bump to 2.39) forgot to drop the ignores
for the 2.38 specific CVEs. Do that now.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure with gcc 14:
In file included from /home/autobuild/autobuild/instance-6/output-1/build/avro-c-1.11.3/src/avro/legacy.h:33,
from /home/autobuild/autobuild/instance-6/output-1/build/avro-c-1.11.3/src/avro/io.h:31,
from /home/autobuild/autobuild/instance-6/output-1/build/avro-c-1.11.3/src/avro/consumer.h:30,
from /home/autobuild/autobuild/instance-6/output-1/build/avro-c-1.11.3/src/avro.h:28,
from /home/autobuild/autobuild/instance-6/output-1/build/avro-c-1.11.3/examples/quickstop.c:18:
/home/autobuild/autobuild/instance-6/output-1/build/avro-c-1.11.3/examples/quickstop.c: In function 'print_person':
/home/autobuild/autobuild/instance-6/output-1/build/avro-c-1.11.3/examples/quickstop.c:123:61: error: passing argument 3 of 'first_value.iface->get_string' from incompatible pointer type [-Wincompatible-pointer-types]
123 | avro_value_get_string(&first_value, &p, &size);
| ^~
| |
| int32_t ** {aka int **}
Fixes:
- http://autobuild.buildroot.org/results/fdbc6a888ba8bb51f4e076a450919477d1378eb3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch removes the package/versal-firmware as this package is replaced
by the boot/xilinx-prebuilt target boot firmware package.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Brandon Maier <brandon.maier@collins.com>
[yann.morin.1998@free.fr: handle legacy]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The new BR2_TARGET_UBOOT_ZYNQMP_PMUFW_PREBUILT option will enable u-boot to
use the xilinx-prebuilt package for downloading a pmufw.elf that gets included
in the generated boot.bin.
If the BR2_TARGET_UBOOT_ZYNQMP_PMUFW_PREBUILT option is enabled, then the
BR2_TARGET_UBOOT_ZYNQMP_PMUFW config for downloading a prebuilt pmufw will
be ignored.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Brandon Maier <brandon.maier@collins.com>
[yann.morin.1998@free.fr:
- add 'custom' to prompt for BR2_TARGET_UBOOT_ZYNQMP_PMUFW
- fix checkpackage
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch add a new boot package for downloading prebuilt firmware for Xilinx
versal and zynqmp evaluation boards.
It solves the problem of being able to verify the hash when downloading a
prebuilt zynqmp pmufw.elf binary.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Brandon Maier <brandon.maier@collins.com>
[yann.morin.1998@free.fr:
- move the hash file to the package dir, not the board dir
- move board name after familly choice
- add default board name for each family
- qstrip the Kconfig strings before use
- introduce XILINX_PREBUILT_BOARD_DIR to simplify paths
- explain the *.pdi glob
- simplify non-versal install
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The per-package-rsync stage can add a significant amount of time to
builds. They can also be annoying as the target-finalize and
host-finalize targets are the slowest and run on every `make all`, which
is used frequently for partial rebuilds.
The per-package-rsync is slow because it launches a new rsync for each
source tree, and each rsync must rescan the destination directory and
potentially overwrite files multiple times. We can instead merge all the
rsync calls down into one call, and rsync is smarter about scanning all
the source directories and only copying over the files it needs to.
We feed the source trees to rsync in reverse-order, as this preserves
the original behaviour. I.e. when using multiple rsyncs, the last source
tree would overwrite anything in the destination. Now when using a
single rsync, we put the last tree first as rsync will select the first
file it finds.
This only supports the 'copy' mode, which is used in the finalize step.
The 'hardlink' mode would require specifying each source tree with the
--link-dest flag, and rsync only support at most 20 such trees at a
time, so we'd need a clever loop, so the 'hardlink' mode is left out, at
least for now.
Below is a benchmark running the host-finalize target for a build with
200 packages.
Benchmark 1: before copy
Time (mean ± σ): 27.171 s ± 0.777 s [User: 6.170 s, System: 14.830 s]
Range (min … max): 26.343 s … 28.566 s 10 runs
Benchmark 2: after copy
Time (mean ± σ): 6.296 s ± 0.196 s [User: 2.874 s, System: 5.600 s]
Range (min … max): 6.094 s … 6.709 s 10 runs
Summary
after copy ran
4.32 ± 0.18 times faster than before copy
Cc: Herve Codina <herve.codina@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Tested-by: Yann E. MORIN <yann.morin@orange.com>
Reviewed-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The 6.8.x series is now EOL upstream, so drop the linux-headers option
and add legacy handling for it.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Our Bugzilla is so slow and unstable that it has become
unusable. Let's switch to using the Gitlab issue tracker instead.
There are still lots of references to the Bugzilla bug tracker in our
News page at https://buildroot.org/news.html, but these are for older
news.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: don't needlessly re-flow]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of downloading a different version of the kernel for the headers as
for the runtime kernel itself, use the same one. By doing so, we now need
to add the hash file for linux-headers.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is perfectly valid for a patch file to have trailing spaces, when for
example an empty or space-only line is appears in a hunk: if the line if
part of the context, whether it be empty or with only spaces, there will
aways be the leading space introduced by the patch itsef, making for a
sapce-only line; if the line is space-only and removed (or added) that
will also appear as a space-only line.
Currently, our editorconfig wants to unconditionally drop trailing
spaces, so when one edits a patch file to add their SoB and Upstream
tags, such a patch would get badly mangled and would not apply, causing
quite some grief and questioning (sad experience looming in the recent
past here)...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The matching in genrandconfig is idiomatically done by matching whole
lines, i.e. with the terminating \n but a few places are missing that.
Those are only matching against '=y', a boolean symbol, so it is in
practice not causing any issue. Still, for consistency, fix those.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Previously, when running `PYTHON3_REMOVE_USELESS_FILES`, the hook to
clean up files from the python config directory assumed a pattern of
"config-$(VERSION)m-$(PLATFORM_TRIPLET)".
However, the "m" ABI suffix was dropped in python 3.8, so the hook would
never actually find files to delete. No error was raised due to the use
of a subshell to invoke find.
Also, if a platform triplet is not detected during the configure stage,
the config directory (LIBPL) defaults to `config-$VERSION`, and has no
trailing `-$PLATFORM_TRIPLET`.
Now, we glob anything after the version to ensure files get deleted.
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If a platform triplet is not detected during the configure stage, the
config directory (LIBPL) defaults to `config-$VERSION`.
In this scenario, the `PYTHON3_REMOVE_USELESS_FILES` hook would fail due
to `find` incorrectly expecting a second dash and then the triplet.
Now, we glob anything after the version which will match in both cases.
Fixes: 54d48c8cad ("package/python3: miscellaneous fixups")
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Building with GCC 14 fails at the configure step with:
./configure: error: libatomic_ops library was not found.
The error is not caused by a missing library, but by an unrelated
"incompatible pointer type" error in the test program:
...
checking for atomic_ops library
objs/autotest.c: In function 'main':
objs/autotest.c:9:48: error: passing argument 1 of 'AO_compare_and_swap' from incompatible pointer type [-Wincompatible-pointer-types]
This used to be a warning, but it is an error since GCC 14.[1]
Fix this by patching the test program in order to use the correct
pointer types.
Fixes: http://autobuild.buildroot.net/results/a3d/a3d8c6fd631b31e272e4d8cc6c3318f2e4151882
[1] https://gcc.gnu.org/gcc-14/porting_to.html#incompatible-pointer-types
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
When running a test that uses host-python-setuptools using the Buildroot
Docker image, for example running the following command,
> ./utils/docker-run ./support/testing/run-tests -o output -s -k tests.package.test_python_pytest.TestPythonPy3Pytest
The build fails with the following error,
> File "/home/blmaier/buildroot/output/TestPythonPy3Pytest/build/host-python-setuptools-69.2.0/setuptools/_distutils/dist.py", line 354, in _gen_paths
> yield pathlib.Path('~').expanduser() / filename
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> File "/home/blmaier/buildroot/output/TestPythonPy3Pytest/host/lib/python3.11/pathlib.py", line 1385, in expanduser
> raise RuntimeError("Could not determine home directory.")
> RuntimeError: Could not determine home directory.
>
> ERROR Backend subprocess exited when trying to invoke get_requires_for_build_wheel
Python setuptools is looking for $HOME but failing to find it.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
With newer versions of DM or DMSC firmware (>v09.02.07) invalid clock
requests will be NAKed and generate a warning in the kernel logs rather
than being ignored like in previous versions of firmware. This, together
with the linux clk driver assuming that all clock IDs are contiguous,
can generate a significant amount of warnings during boot when many
drivers are being probed.
A fix for this has been merged into Linux (commit: ad3ac13c6ec31)
however the backport to older kernels was missed which unfortunately
affects the current v6.8 kernel.
Manually backport this fix while we're using the v6.8 kernel
Signed-off-by: Bryan Brattlof <bb@ti.com>
Tested-by: Gero Schwäricke <gero.schwaericke@grandcentrix.net>
[Arnout: add Upsream tag]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
With newer versions of DM or DMSC firmware (v09.02.07+) invalid clock
requests will be NAKed and generate a warning in the kernel logs rather
than being ignored like in previous versions of firmware. This, together
with the linux clk driver assuming that all clock IDs are contiguous,
can generate a significant amount of warnings during boot when many
drivers are being probed.
A fix for this has been merged into Linux (commit: ad3ac13c6ec31)
however the backport to older kernels was missed which unfortunately
affects the current v6.8 kernel.
Manually backport this fix while we're using the v6.8 kernel
Signed-off-by: Bryan Brattlof <bb@ti.com>
Tested-by: Gero Schwäricke <gero.schwaericke@grandcentrix.net>
[Arnout: add Upstream tag]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This patch bumps the zynqmp_zcu106_defconfig to xilinx-v2024.1 which includes
the following updates:
- Linux v6.6.10
- U-Boot v2024.01
- ATF v2.10
- PMUFW xilinx-v2024.1
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch bumps the zynqmp_zcu104_defconfig to xilinx-v2024.1 which includes
the following updates:
- Linux v6.6.10
- U-Boot v2024.01
- ATF v2.10
- PMUFW xilinx-v2024.1
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch bumps the zynqmp_zcu102_defconfig to xilinx-v2024.1 which includes
the following updates:
- Linux v6.6.10
- U-Boot v2024.01
- ATF v2.10
- PMUFW xilinx-v2024.1
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The patch adds the .hash file for Linux, which then allow to enable
BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we can now drop the
defconfig from .checkpackageignore.
Note that the defconfig uses linux-headers that are not the same as
the kernel (although the same series), and instead use the 6.1.x
version from the linux-headers package choice. So we don't need to
add a .hash file for linux-headers.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[yann.morin.1998@free.fr: don't add linux-headers symlink; explain why]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The patch adds .hash files for Linux, Linux headers and U-Boot and then
enables BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we can now drop the
defconfig from .checkpackageignore.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 58a291470a (package/pkg-golang: select BR2_PACKAGE_HOST_GO)
ensured that we had the host-go enabled for all packages that need it.
However, for delve, the select was added to the _ARCH_SUPPORTS symbol,
which means that host-go is built as soon as delve supports the target,
even when devle itself is not enabled.
Move the select to the main symbol.
Fixes: 58a291470a
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The SWTPM package provides TPM emulators with different front-end
interfaces to libtpms. TPM emulators provide socket interfaces (TCP/IP and
Unix) and the Linux CUSE interface for the creation of multiple native
/dev/vtpm* devices.
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
[yann.morin.1998@free.fr: disable tests]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Libtpms is a library that targets the integration of TPM functionality
into hypervisors, primarily into Qemu. Libtpms provides a very narrow
public API for this purpose so that integration is possible. Only the
minimum of necessary APIs are made publicly available.
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
[yann.morin.1998@free.fr: also disable doc and tests]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch moves the linux and uboot hashes from 'board/zynq/patches' to
'board/xilinx/patches'. The reason for this is that all of the Xilinx boards
including zynq, zynqmp and versal will be using the same linux and uboot repo.
By putting the hashes in 'board/xilinx/patches', the same hashes can be shared
amongst all of the Xilinx boards.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch bumps the zynqmp_kria_kr260_defconfig to xilinx-v2024.1 which includes
the following updates:
- Linux v6.6.10
- U-Boot v2024.01
- ATF v2.10
- PMUFW xilinx-v2024.1
Migrated u-boot to xilinx_zynqmp_kria_defconfig, so uboot.fragment no longer
needed.
With u-boot 2024.1, CONFIG_SYS_SPI_U_BOOT_OFFS has a new meaning. It is now
the offset between the base address of the boot.bin and u-boot.itb instead of
a raw base address of u-boot.itb. This allows for A/B firmware updates since
the u-boot.itb is set by default to a 0x80000 offset of the boot.bin.
Thus, Kria SOMs come with the following QSPI address table.
Partition A:
0x200000 - boot.bin
0x280000 - u-boot.itb
Partition B:
0xF80000 - boot.bin
0x1000000 - u-boot.itb
This patch updates the addressing in the readme.txt accordingly.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch bumps the zynqmp_kria_kv260_defconfig to xilinx-v2024.1 which includes
the following updates:
- Linux v6.6.10
- U-Boot v2024.01
- ATF v2.10
- PMUFW xilinx-v2024.1
Migrated u-boot to xilinx_zynqmp_kria_defconfig, so uboot.fragment no longer
needed.
With u-boot 2024.1, CONFIG_SYS_SPI_U_BOOT_OFFS has a new meaning. It is now
the offset between the base address of the boot.bin and u-boot.itb instead of
a raw base address of u-boot.itb. This allows for A/B firmware updates since
the u-boot.itb is set by default to a 0x80000 offset of the boot.bin.
Thus, Kria SOMs come with the following QSPI address table.
Partition A:
0x200000 - boot.bin
0x280000 - u-boot.itb
Partition B:
0xF80000 - boot.bin
0x1000000 - u-boot.itb
This patch updates the addressing in the readme.txt accordingly.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch bumps the versal_vck190_defconfig to xilinx-v2024.1 which includes
the following updates:
- Linux v6.6.10
- U-Boot v2024.01
- ATF v2.10
- PLM xilinx-v2024.1
- PSMFW xilinx-v2024.1
Removed ATF patches that were needed for ATF v2.8.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Note that here, it is in fact not really relevant. We only extract a
tarball, and we don't use any "modern" or GNU-only options like
--strip-components. However, for consistency it's better to use the same
tar everywhere.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: "Maier, Brandon L Collins" <Brandon.Maier@collins.com>
Reviewed-by: brandon.maier@collins.com
[Arnout: quote TAR="..."]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Later commits will start using this variable.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Arnout: quote TAR="..."]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The Debian control aarchive does not contain any patch for liblockfile
1.17; it has had no patch since Debian packaged version 1.16-1.1.
Drop the path tarball now.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Arnout: also drop from hash file]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The patch adds .hash files for Arm trusted firmware, Linux, Linux headers
and U-Boot and then enables BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we
can now drop the defconfig from .checkpackageignore.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The patch adds .hash files for Linux, Linux headers and U-Boot and then
enables BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we can now drop the
defconfig from .checkpackageignore.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
No functional change as we install a python symlink, but use python3 for
consistency with the other scripts.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
There is no longer a need to lie about having mercurial installed as of
upstream 5c4b0d063a, so drop the ac_cv_prog_HAS_HG override.
`PYTHON3_REMOVE_USELESS_FILES`, while not exactly useless, had been
referencing stale files and not performing full cleanup:
* the "m" ABI suffix was dropped in upstream 6c44fde3e0 (python 3.8)
* the smtpd was dropped in upstream a797fba888 (python 3.1)
* the wininst* binaries were dropped in upstream 0e2a0f72cc (python 3.10)
These legacy references have now been dropped.
The smtpd.py file is a bit quirky because despite having been removed
upstream, Buildroot's patches to disable certain modules have been
carrying it forward. This has been rectified.
While here, rework the file removals to accomodate the ABI suffix change
and to globally remove __pycache__ directories. It's important to note
that Buildroot uses legacy pyc placements for sourceless distributions,
meaning __pycache__ is not used at all [0].
When necessary, optimized pyc files will be generated into the correct
paths in subsequent hooks.
[0]: https://peps.python.org/pep-3147/#case-4-legacy-pyc-files-and-source-less-imports
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following CVEs:
CVE-2024-24789: archive/zip: mishandling of corrupt central directory record
CVE-2024-24790: net/netip: unexpected behavior from Is methods for IPv4-mapped IPv6 addresses
View the release notes for more information:
https://go.dev/doc/devel/release#go1.22.4
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When using imx-mkimage 6.1.36_2.1.0 or later, an additional data structure
is inserted in the generated image. The FIT external data position passed
to the uboot mkimage program needs to be adjusted accordingly.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=15973
Fixes: 72de789023 ("package/imx-mkimage: bump version to lf-6.1.36-2.1.0")
Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
[Sébastien: Tested on i.MX8MM EVK and i.MX8MP EVK]
[Sébastien:
- fix subject
- add Tested-by tag
- fix Fixes tags
]
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
makedumpfile libc dependency is coming from elfutils. Commit
bf9583a502 ("package/elfutils: enable on musl") removed elfutils
libc dependency. makedumpfile now builds fine with musl libc. Remove
its libc dependency.
Cc: Alexander Egorenkov <egorenar-dev@posteo.net>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix pthread_detach() detection that is broken when building
with GCC 14.x:
checking for pthread_kill... yes
checking for pthread_rwlock_destroy with <pthread.h>... yes
checking for pthread_detach with <pthread.h>... no
configure: error: could not locate pthread_detach()
make[1]: *** [package/pkg-generic.mk:273:
/home/user/buildroot/bsp-barebox/build/ntp-4.2.8p17/.stamp_configured]
Error 1
make: *** [Makefile:82: _all] Error 2
Reference: https://bugs.ntp.org/show_bug.cgi?id=3926
Additionally, refresh patch 0002 to fix the offset of hunk 1.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
At91dataflashboot is an ancient (2006) fork of at91bootstrap1 specifically
for the Atmel/Microchip AT45 series (dataflash) of serial flashes.
The package hasn't seen any meaningful updates since, is not used by any
defconfigs and at91bootstrap3 nowadays has AT45 support - So remove the
package.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr: update .checkpackageignore]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The upstream is no longer available, no defconfigs use it and the package
has been replaced 12 years ago with at91bootstrap3 with commit ca0d69c61c
(at91bootstrap3: new package), so remove it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr: update .checkpackageignore]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
It has been well over 10 years since glibc 2.14 was released; the last
Debian version that had an earlier glibc was Wheezy, which Freexian
stopped to maintain as an ELTS in June 2020, 4 years ago, while the
oldest still maintained Ubuntu has glibc 2.21. It is now safe to assume
glibc 2.14 on all major, relevant distributions nowadays.
The distutils module is no longer bundled with python 3.12 so this
eliminates the need to install additional python modules under python
3.12.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr: add Debian and Ubuntu references]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When systemd and tpm2-tss with fapi support are enabled, the fakeroot
script fail with:
<stdin>:35: Failed to resolve user 'tss': No such process.
When fapi support is enabled, tpm2-tss package install additional
configuration files that are expecting tss user and group exist [1].
/etc/sysusers.d/tpm2-tss.conf
/etc/tmpfiles.d/tpm2-tss-fapi.conf
The build fail in the fakeroot environment while handling tmpfiles
installed by tpm2-tss with fapi by host-systemd.
tss user and group is currently created by the tpm2-abrmd package but
tpm2-tss package also provide a udev rule file tpm-udev.rules [2] that
set the ownership of dev nodes /dev/tpmX and /dev/tpmrmX to tss
user/group. So tpm2-tss package must define TPM2_TSS_USERS to create
tss user and group, not tpm2-abrmd package.
So, move TPM2_ABRMD_USERS to TPM2_TSS_USERS.
Note: tpm2-abrmd is nowadays deprecated since the in-kernel Resource
Manager (available since kernel 4.12) is preferred [3].
[1] https://github.com/tpm2-software/tpm2-tss/blob/4.1.3/INSTALL.md?plain=1#L184
[2] https://github.com/tpm2-software/tpm2-tss/blob/4.1.3/dist/tpm-udev.rules
[3] https://github.com/tpm2-software/tpm2-abrmd/blob/3.0.0/README.md?plain=1#L39
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With the corresponding binary library and gstreamer 0.10 plugin removed, the
package for the kernel module does not make a lot of sense, so remove the
package.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The linux4sam_1.9 upstream is no longer available for this binary-only
library that was used with a gstreamer 0.10 plugin, which was itself removed
in 2020.02 with commit fb49c7a261 (package/gstreamer/*: remove
packages), so remove the package.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The tarball is also available over https from github, so use that instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The tarball (with .tar.gz extension but same content) is also available over
https from sourceforge, so use that instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
ftp.netfilter.org no longer provides ftp, so use the https:// url from
_SITE.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The tarballs are also available over https, so use that instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
ftp.netfilter.org no longer provides ftp, so use the https:// url from
_SITE.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The ftp server does not respond, so change to https:// instead. Here the
3.2.6 version is under older_versions.
wget ftp://ftp.ncftp.com/ncftp/ncftp-3.2.6-src.tar.gz
--2024-06-03 08:10:44-- ftp://ftp.ncftp.com/ncftp/ncftp-3.2.6-src.tar.gz
=> ‘ncftp-3.2.6-src.tar.gz’
Resolving ftp.ncftp.com (ftp.ncftp.com)... 209.197.102.38
Connecting to ftp.ncftp.com (ftp.ncftp.com)|209.197.102.38|:21... ^C
http redirects to https, so update the help text to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The ftp server does not allow anonymous login, causing the download to fail:
wget --passive-ftp -nd -t 3 -O '/home/peko/source/buildroot/output-qt/build/.lynx2.8.9rel.1.tar.bz2.XlcdCK/output' 'ftp://ftp.invisible-island.net/lynx/tarballs/lynx2.8.9rel.1.tar.bz2'
--2024-06-02 22:21:49-- ftp://ftp.invisible-island.net/lynx/tarballs/lynx2.8.9rel.1.tar.bz2
=> ‘/home/peko/source/buildroot/output-qt/build/.lynx2.8.9rel.1.tar.bz2.XlcdCK/output’
Resolving ftp.invisible-island.net (ftp.invisible-island.net)... 216.194.253.29
Connecting to ftp.invisible-island.net (ftp.invisible-island.net)|216.194.253.29|:21... connected.
Logging in as anonymous ...
Login incorrect.
Luckily the tarball is also available over https://, so use that instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr:
- use https, not http
- drop trailing '/' in _SITE
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
ftp.netfilter.org no longer provides ftp, so use the https:// url from
_SITE.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
ftp.netfilter.org no longer provides ftp, so use the https:// url from
_SITE.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
ftp.netfilter.org no longer provides ftp, so use the https:// url from
_SITE.
This provides a .sha256sum but NOT md5/sha1, so update the .hash file to
match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
ftp.astrom.com also serves the files over https://, so use that instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr: use https, not http]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
For consistency, adapt the reference in the hash file too.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr: switch to https as suggested by Baruch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Change download location as the new version is not available at the
old location.
Remove already upstreamed patch.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since qt5base was last bumped in 8ab4a0a348 (package/qt5: bump packages
to latest kde submodule versions), the hash for the downloaded tarball
has changed:
$ make qt5base-source
[...]
ERROR: expected: 935d01f5c34903ad9e979431cec7a8a59332ed3fc539e639f5ba87e8d6989b9d
ERROR: got : 3067c4d84ba9927bfe65bf606c17af082199e0a3b22781fbf9bc6c6bc3de26dd
We know the hash was good back when 8ab4a0a348 was applied, because
the tarball has been cached on sources.buildroot.org with the expected
hash:
$ curl 'https://sources.buildroot.net/qt5base/qtbase-da6e958319e95fe564d3b30c931492dd666bfaff.tar.bz2' 2>/dev/null |sha256sum -
935d01f5c34903ad9e979431cec7a8a59332ed3fc539e639f5ba87e8d6989b9d -
But now, the archive generated by the KDE gorge (Gitlab underneath) has
another hash (as seen above). This means that the KDE forge (Gitlab) has
changed the way it generates archives. So, what's the delta? It turns
out that the only changes are about CRLF that were present in the
original archive, and are no longer in the new one. It is to be noted
that the affected files do not have CRLFS in the repository. It further
turns out that the archive was previously generated with .gitattibutes
of the main branch ('dev' in Qt repositories), while now they are
generated with the .gitattibutes of the commit for which they are
generated.
Switch to using the git download method for really reproducible
archives...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Sebastian Weyer <sebastian.weyer@smile.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, when we generate archives, e.g. for git, svn, cargo or go, we
use the package _BASENAME_RAW as the root directory of the generated
archive. For example, for package foo at version 1.2.3, that would generate
an archive rooted at foo-1.2.3/.
This is usually what we want, except in one specific condition: when the
package shares its download with another package *and* it is a generated
archive. In that case, the root directory will be different for each of
the two packages, which is incorrect, but was so far benign: we never
had any hash for such generated archives, and they were only generated
in two cases:
- linux and linux-headers
- barebox and barebox-aux
As we skip one directory depth when extracting the archives, we did not
care what the root directory was; whether it was that of one package or
the other was of no consequence.
But now that we can have hashes for archives generated from custom
versions, this breaks the usual case where the headers used for the
toolchains are those of the kernel to build for the target. In this
case, we may end up downloading the linux-headers package before we
download the linux package, so we'd get the hash for an archive rooted
at linux-headers-XXX/, but the one for the linux package the archive
would be rooted at linux-XXX/, or we may end up (e.g. with parallel
builds) downloading the linux package first and linux-headers next.
That would cause conflicts in hashes, as demonstrated by the only defconfig
we have in that situation, olimex_stmp157_olinuxino_lime_defconfig.
_BASENAME_RAW is a construct that is expanded to include the RAWNAME
followed by a dash and the version, if there is a version, or with just
the RAWNAME when there is no version.
We tweak the download macro to use _DL_SUBDIR followed by the version.
This is only used by VCS backends (cvs, git, svn...) and so there will
always be a version string, so no need to duplicate the case without a
version like is done for _BASENAME_RAW
_DL_SUBDIR defaults to _RAWNAME, so this is a noop by default, unless
the package declares it shares its download with another one, in which
case the generated archive will now be rooted as for the shared package.
This was triggered by:
https://patchwork.ozlabs.org/project/buildroot/patch/20240602070634.597337-1-francois.perrad@gadz.org/
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The tools require openssl (and cjson for mosquitto_ctrl), and are silently
skipped by the mosquitto build system if those are not available.
The tools are small compared to the broker and dependencies:
-rwxr-xr-x 1 peko peko 4.8M Jun 1 00:42 target/usr/lib/libcrypto.so.3
-rwxr-xr-x 1 peko peko 968K Jun 1 00:42 target/usr/lib/libssl.so.3
-rwxr-xr-x 1 peko peko 266K Jun 1 00:42 target/usr/sbin/mosquitto
-rwxr-xr-x 1 peko peko 54K Jun 1 00:42 target/usr/bin/mosquitto_ctrl
-rwxr-xr-x 1 peko peko 34K Jun 1 00:42 target/usr/lib/libcjson.so.1.7.18
-rwxr-xr-x 1 peko peko 26K Jun 1 00:42 target/usr/bin/mosquitto_passwd
So automatically build them (if the dependencies are available) when the
broker is built.
Notice: We have to explicitly build apps/mosquitto_ctrl +
apps/mosquitto_passwd and not just apps, as apps/Makefile uses a DIRS
variable that conflicts with the DIRS=.. we pass to the toplevel Makefile.
Signed-off-by: Sebastien Laveze <slaveze@smartandconnective.com>
[Peter: drop dedicated option, also handle mosquitto_ctrl]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Restarting dnsmasq can cause constant issues: stop works, but start
fails because the new instance can't bind the socket. Another restart
immediately after works just fine:
# /etc/init.d/S80dnsmasq restart
Stopping dnsmasq: OK
Starting dnsmasq:
dnsmasq: failed to create listening socket for 192.168.128.1: Address in use
FAIL
# /etc/init.d/S80dnsmasq restart
Stopping dnsmasq: FAIL
Starting dnsmasq: OK
Solve this by waiting for process to actually stop before returning
from the stop command. Clean up the PID file after to avoid potential
issues with the PID being reused after stop. The wait could also be
placed inside the restart block, but putting it into the stop block
has the advantage that it also avoids similar issues for any other
callers.
Signed-off-by: Fiona Klute <fiona.klute+wiwa@gmx.de>
[yann.morin.1998@free.fr:
- fix shellcheck
- reflow commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Test the source provider of host-go to build a Go package.
The tests consist of building and installing a Go package in the root
file system of an ARM vexpress QEMU system.
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
[yann.morin.1998@free.fr: drop the go-bin test-case]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Turns host-go into a virtual package, with a single providers:
- host-go-src, which builds host-go from source based on the same logic
that was previously used in package/go/go/go.mk, now moved to
package/go/go-src/go-src.mk to remove any ambiguity on the role of
the package.
In later commits, we'll add host-go-bin a prebuilt binary host go compiler
as another provider.
A similar solution is proposed for host-rust.
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Makes every packages built by the Go compiler select a new variable
introduced in this patch: BR2_PACKAGE_HOST_GO.
In later commits Go compiler variant will be introduced (built from
source, pre-built binaries) and selecting BR2_PACKAGE_HOST_GO will
force to add host-go provider to the dependency list.
The same pattern is used for Rust packages.
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Move every go compiler-related packages into a newly created
package/go/ subdirectory.
This subdirectory structure moves the GO_VERSION variable into the
common package/go/go.mk file. In the next commits, host-go will be
turned into a virtual-package and the common GO_VERSION force the
providers to use the same Go compiler version.
Common variables to all providers are kept in package/go/go.mk and
package/go/Config.in.host.
Also, the subdirectory structure forces the evaluation of the common
GO_VERSION before the providers access it.
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 9a629f5 "utils/docker-run: allow running with Podman" added an
option on system providing the podman command. This case is mainly
for Fedora systems.
Fedora repositories have a podman-docker package, that provides the
docker command for compatibility. See [1]. In that case, invoking
"docker" redirects to podman.
When this package is installed on a Fedora system, both the docker and
podman commands are available. Since the docker command is checked
before podman, the --userns option is not passed in that case. This
brings "permission denied" errors.
Other cases are also possible, like a host system providing the real
Docker alongside a podman installation. In such a case, to avoid
unexpected change of behavior of the docker-run script, the original
search order is preserved (search for "docker" first, then "podman").
This commit changes the way the podman user namespace mode is set.
Rather than adding the "--userns=keep-id" command line option only in
the podman case, it is globally set using the PODMAN_USERNS=keep-id
environment variable [2].
Doing so makes sure that the variable will be consumed by the "docker"
compatibility command, and just ignored by the real "docker"
implementation.
[1] https://packages.fedoraproject.org/pkgs/podman/podman-docker/
[2] https://docs.podman.io/en/latest/markdown/podman-run.1.html
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update all skarnet.org packages to their current upstream version:
- execline
- mdevd
- s6
- s6-dns
- s6-linux-init
- s6-linux-utils
- s6-networking
- s6-portable-utils
- s6-rc
- skalibs
This patch(set) updates the packages from skarnet.org. It is one commit
to avoid build failures due to incompatible versions: for example, when
only skalibs are updated, execline fails to build; conversely, bumping
execline before skalibs also yields build failures.
Signed-off-by: J. Neuschäfer <j.neuschaefer@gmx.net>
[yann.morin.1998@free.fr:
- cleanup commit title
- reword commit log
- include explanations why all bumps are done at once
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This requires python 3.5 or newer but is a bit cleaner than the
previous coroutine method.
This should also fix a python3.12 issue:
[Tue, 28 May 2024 13:09:05] INFO: generate the configuration
Traceback (most recent call last):
File "/home/autobuild/autobuild/instance-0/buildroot/utils/genrandconfig", line 833, in <module>
ret = asyncio.run(gen_config(args))
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.12/asyncio/runners.py", line 194, in run
return runner.run(main)
^^^^^^^^^^^^^^^^
File "/usr/lib/python3.12/asyncio/runners.py", line 89, in run
raise ValueError("a coroutine was expected, got {!r}".format(coro))
ValueError: a coroutine was expected, got <generator object gen_config at 0xffff7bd822c0>
[Tue, 28 May 2024 13:09:06] WARN: failed to generate configuration
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Vincent Fazio <vfazio@xes-inc.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
And enable BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we can now drop the
defconfig from .checkpackageignore.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Linux kernel failed to build since commit e88225ed88 (package/binutils:
make 2.41 the default version). The new version contains the commit
790756c7e0229 ("ARM: 8933/1: replace Sun/Solaris style flag on section
directive") that fixes the issue.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
And enable BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we can now drop the
defconfig from .checkpackageignore.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Linux kernel failed to build since commit e88225ed88 (package/binutils:
make 2.41 the default version). The new version contains the commit
790756c7e0229 ("ARM: 8933/1: replace Sun/Solaris style flag on section
directive") that fixes the issue.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Podman is command line compatible with Docker, there's no need to
require contributors to install Docker to run checks before sending
patches.
The additional "--userns=keep-id" option is necessary because unlike
Docker Podman creates a user namespace for containers by
default. Without keep-id the repository and pre-existing output files
belong to root inside the container namespace, breaking writes,
certain Git safety checks, and possibly all access (if the user is
using a strict umask).
Signed-off-by: Fiona Klute <fiona.klute+wiwa@gmx.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now that the zynq_* defconfigs have migrated to xilinx_2024.1, remove the
older hashes.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynq_microzed_defconfig to xilinx-v2024.1 which includes
the following updates:
- Linux v6.6.10
- U-Boot v2024.01
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynq_zed_defconfig to xilinx-v2024.1 which includes
the following updates:
- Linux v6.6.10
- U-Boot v2024.01
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynq_zc706_defconfig to xilinx-v2024.1 which includes
the following updates:
- Linux v6.6.10
- U-Boot v2024.01
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynq_zc702_defconfig to xilinx-v2024.1 which includes
the following updates:
- Linux v6.6.10
- U-Boot v2024.01
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The zynq/zynqmp post-image scripts are now identical, so replace the zynq
copy with a symlink to limit redundancy.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Linux 6.6 includes a xilinx directory in the dts directory structure for zynq
boards. This patch updates the post-image.sh to match the zynqmp post-image.sh
in order to support this change.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the Linux and u-boot hashes for xilinx_2024.1 release.
xilinx_2024.1 release includes:
- uboot 2024.01
- linux 6.6.10
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
And enable BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we can now drop the
defconfig from .checkpackageignore.
Furthermore, the use of the directory board/atmel/at91sam9x5ek/patches
for all 4 at91sam9x5ek*_defconfig configurations automatically fixes the
Linux compilation failure for the at91sam9x5ek_defconfig,
at91sam9x5ek_mmc_defconfig, and at91sam9x5ek_mmc_dev_defconfig
configurations as well.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[Peter: fix u-boot hash]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Linux kernel failed to build since commit e88225ed88 (package/binutils:
make 2.41 the default version). The new version contains the commit
790756c7e0229 ("ARM: 8933/1: replace Sun/Solaris style flag on section
directive") that fixes the issue.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: David Lechner <david@lechnology.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Most boards use BR2_KERNEL_HEADERS_AS_KERNEL with their custom kernels.
So when creating their custom hash files, the linux-headers.hash is the
same as linux.hash. In this case we symlink linux-headers to linux to
make maintenance easier. Update the add-custom-hashes tool to explicitly
handle this case.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
[Peter: use cmp -s]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Ccache CMake build system has some conditions that automatically
enables a developer mode (sets CCACHE_DEV_MODE=ON). See [1].
More specifically, if CCACHE_DEV_MODE is unset AND the environment
variable "CI" is set, CCACHE_DEV_MODE is set to "ON".
This situation can happen when Buildroot builds are executed in
Jenkins jobs, for example. Since Buildroot does not set
CCACHE_DEV_MODE and Jenkins sets the "CI" environment variable,
this ccache developer mode can be enabled in an unexpected way
for the Buildroot user. For example, it happened that a Jenkins build
breaks, while the build with the same configuration in the user
session is working.
One of the effects of enabling this ccache developer mode, is to treat
compiler warnings as errors, see [3]. This can lead to build error,
depending on the ccache version and the host compiler being used.
This behavior can be reproduced and observed, with commands:
cat > .config <<EOF
BR2_aarch64=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_CCACHE=y
BR2_PACKAGE_BUSYBOX=y
EOF
make olddefconfig
make clean
make host-ccache
Outputs:
...
-- Ccache version: 4.9.1
-- Ccache dev mode: OFF
-- Setting CMAKE_BUILD_TYPE to Release as none was specified.
...
Whereas:
make clean
CI=true make host-ccache
Outputs:
...
-- Ccache version: 4.9.1
-- Ccache dev mode: ON
-- Setting CMAKE_BUILD_TYPE to Debug as none was specified.
...
For a failure example: on Fedora 40 with host gcc 14.1.1, Buildroot at
tag 2024.02 has ccache 4.8.2. Host ccache can fail, when building with
"CI=true make host-ccache" with output:
/buildroot/output/build/host-ccache-4.8.2/src/third_party/fmt/core.h:3119:44: in 'constexpr' expansion of 'fmt::v8::make_format_args<>(args#0, args#1)'
/buildroot/output/build/host-ccache-4.8.2/src/third_party/fmt/core.h:1706:15: error: possibly dangling reference to a temporary [-Werror=dangling-reference]
1706 | const auto& arg = arg_mapper<Context>().map(std::forward<T>(val));
| ^~~
This commit sets CCACHE_DEV_MODE=OFF to make the ccache behavior more
deterministic in Buildroot, independently of being used in a CI tool
or not.
[1] https://github.com/ccache/ccache/blob/v4.9.1/CMakeLists.txt#L56
[2] https://github.com/jenkinsci/jenkins/blob/jenkins-2.459/core/src/main/java/jenkins/model/CoreEnvironmentContributor.java#L43
[3] https://github.com/ccache/ccache/blob/v4.9.1/cmake/StandardWarnings.cmake#L5
Reported-by: Xavier Roumegue <xroumegue@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new stable series brings in support for pointer lock, customization
of subprocess launching, and a build fix that allows using EGL
implementations that do not ship a pkg-config module. Version 1.16.x is
recommended for WPE WebKit 2.44.x, which will be updated in a follow-up
patch.
Release notes:
https://wpewebkit.org/release/libwpe-1.16.0.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The defconfig fails in uboot build, with output:
In file included from tools/imagetool.c:10:
include/image.h:1178:12: fatal error: openssl/evp.h: No such file or directory
1178 | # include <openssl/evp.h>
| ^~~~~~~~~~~~~~~
This commit fixes the issue by adding
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y to the defconfig.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/6918689164
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Linux kernel fails to build since commit e88225ed88 (package/binutils:
make 2.41 the default version). This commit applies the backport patch of
upstream commit 790756c7e0229dedc83bf058ac69633045b1000e to the 4.19.y
stable kernel.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[Peter: extend description to mention binutils 2.41]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit dc0f721 "package/gcc: switch to 13.x as default",
mx51evk_defconfig is failing to build in Kernel (see [1]),
with output:
drivers/ata/libahci.c: In function 'ahci_led_store':
././include/linux/compiler_types.h:315:45: error: call to '__compiletime_assert_328' declared with attribute error: BUILD_BUG_ON failed: sizeof(_s) > sizeof(long)
315 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^
This commit fixes the issue by bumping the Kernel to 5.10.218.
The kernel commit fixing the build failure is [2], first included in
v5.10.184. There is also many other gcc-13 fixes.
While bumping the Kernel, this commit also enables
BR2_DOWNLOAD_FORCE_CHECK_HASHES=y, add the relevant archive hash files,
and removes the defconfig entry in ".checkpackageignore".
Fixes: [1]
[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/6918688967
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=4c3ddc06cedb62f2904e58fd95170bf206bee149
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Run-time dependency xcb-cursor found: NO (tried pkgconfig and cmake)
../../br-test-pkg/bootlin-armv7-glibc/build/weston-13.0.0/tests/meson.build:340:2: ERROR: Problem encountered: xcb and xcb-cursor required for running xwayland tests
Fixes:
- https://bugs.busybox.net/show_bug.cgi?id=15766
Signed-off-by: Thomas Devoogdt <thomas@devoogdt.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add global patch directory pointing to board specific .hash files
for uboot, linux, linux-headers and add BR2_DOWNLOAD_FORCE_CHECK_HASHES.
This way we can drop this defconfig entry in .checkpackageignore.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 2e349be94a (configs/orangepi_pc_defconfig: bump U-boot to
v2024.01 to fix compatibility with setuptools >= 69) bumped U-Boot, but
forgot to add a dependency on host-openssl. Fix that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with kernel >= 6.7:
/home/buildroot/autobuild/instance-0/output-1/build/cryptodev-linux-1.13/./cryptlib.c: In function ‘cryptodev_hash_init’:
/home/buildroot/autobuild/instance-0/output-1/build/cryptodev-linux-1.13/./cryptlib.c:384:28: error: implicit declaration of function ‘crypto_ahash_alignmask’; did you mean ‘crypto_aead_alignmask’? [-Werror=implicit-function-declaration]
384 | hdata->alignmask = crypto_ahash_alignmask(hdata->async.s);
| ^~~~~~~~~~~~~~~~~~~~~~
| crypto_aead_alignmask
Fixes:
- http://autobuild.buildroot.org/results/466360c7baec2edf42dc6f0ad9a8d757dd471c88
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The defconfig fails in uboot build, with output:
scripts/sign-file.c:25:10: fatal error: openssl/opensslv.h: No such file or directory
25 | #include <openssl/opensslv.h>
| ^~~~~~~~~~~~~~~~~~~~
This commit fixes the issue by adding
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y to the defconfig.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/6929002318
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following or1k build failure raised since bump to version 0.2.2
in commit 079d992b27:
In file included from /home/buildroot/autobuild/run/instance-0/output-1/host/or1k-buildroot-linux-uclibc/sysroot/usr/include/lua.hpp:6,
from ../src/lua.hh:23,
from ../src/parser.hh:4,
from ../src/ffilib.cc:7:
../src/ffilib.cc: In static member function 'static void ffi_module::setup(lua_State*)':
../src/ffilib.cc:1616:28: error: expected ')' before 'FFI_ARCH_NAME'
1616 | lua_pushliteral(L, FFI_ARCH_NAME);
| ^~~~~~~~~~~~~
Fixes: 079d992b27
- http://autobuild.buildroot.org/results/4e14753732c5b6fe8ba9ecc4050ffb35f471c428
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit c3e17c407a (configs/qemu_sparc_ss10: re-introduce defconfig) added a
hash file for the Linux kernel, but mistakingly used the .tar.gz instead of
.tar.xz.
The patch fixes "make legal-info" for qemu_sparc_ss10 configuration:
>>> host-gcc-initial 13.2.0 Collecting legal info
COPYING: OK (sha256: 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c)
COPYING3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
COPYING.LIB: OK (sha256: a9bdde5616ecdd1e980b44f360600ee8783b1f99b8cc83a2beb163a0a390e861)
COPYING3.LIB: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c)
ERROR: No hash found for linux-6.8.6.tar.xz
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[Peter: extend commit message]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
And enable BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we can now drop the
defconfig from .checkpackageignore.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 5.10.9 kernel fails to build with GCC 13.x:
In file included from <command-line>:
drivers/ata/libahci.c: In function ‘ahci_led_store’:
././include/linux/compiler_types.h:315:45: error: call to ‘__compiletime_assert_321’ declared with attribute error: BUILD_BUG_ON failed: sizeof(_s) > sizeof(long)
315 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^
././include/linux/compiler_types.h:296:25: note: in definition of macro ‘__compiletime_assert’
296 | prefix ## suffix(); \
| ^~~~~~
././include/linux/compiler_types.h:315:9: note: in expansion of macro ‘_compiletime_assert’
315 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^~~~~~~~~~~~~~~~~~~
./include/linux/build_bug.h:39:37: note: in expansion of macro ‘compiletime_assert’
39 | #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
| ^~~~~~~~~~~~~~~~~~
./include/linux/build_bug.h:50:9: note: in expansion of macro ‘BUILD_BUG_ON_MSG’
50 | BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition)
| ^~~~~~~~~~~~~~~~
./include/linux/nospec.h:58:9: note: in expansion of macro ‘BUILD_BUG_ON’
58 | BUILD_BUG_ON(sizeof(_s) > sizeof(long)); \
| ^~~~~~~~~~~~
drivers/ata/libahci.c:1137:23: note: in expansion of macro ‘array_index_nospec’
1137 | pmp = array_index_nospec(pmp, EM_MAX_SLOTS);
| ^~~~~~~~~~~~~~~~~~
This is fixed upstream by commit f07788079f515ca (ata: ahci: fix enum
constants for gcc-13), which has been backported to 5.10.x as of 5.10.184,
so bump to v5.10.217 to fix the build.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/6865597706
setuptools.extern.packaging.version.InvalidVersion: Invalid version: 'u-boot-2020.10'
make[5]: *** [scripts/dtc/pylibfdt/Makefile:30: scripts/dtc/pylibfdt/_libfdt.so] Error 1
make[4]: *** [scripts/Makefile.build:419: scripts/dtc/pylibfdt] Error 2
make[4]: *** Waiting for unfinished jobs....
make[3]: *** [scripts/Makefile.build:419: scripts/dtc] Error 2
make[2]: *** [Makefile:577: scripts] Error 2
make[1]: *** [package/pkg-generic.mk:283: /builds/buildroot.org/buildroot/output/build/uboot-2020.10/.stamp_built] Error 2
Commit 6b62384e3d (package/python-setuptools: bump to version 69.0.3)
bumped setuptools, which now errors out when passed a version with a prefix
string. This u-boot- prefix string is dropped since U-Boot 2023.01 with
commit c977b1843504 (libfdt: Fix invalid version warning), so bump U-Boot to
v2024.01 to fix this issue.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By passing TARGET_CONFIGURE_OPTS to make, the following usptream CFLAGS
are completely overridden:
CFLAGS = $(THREADS) $(OPT) $(W) $(XCFLAGS)
As a result, setting XCFLAGS is a no-op and -pthread is not passed
resulting in the following build failure since the addition of the
package in commit eb60c4054c:
//binhome//.buildroot.//autobuildlib//rungcc//instancepowerpc64--3buildroot/-outputlinux--1gnu//host9.3.0//opt./.ext/-.toolchain.//bin./../../.lib//powerpc64gcc-/buildrootpowerpc64--linuxbuildroot--gnulinux/-bingnu//ld9.3.0:/ .mdb.c.:/(...text/+.0x1a44.)/:. .undefined/ powerpc64reference- buildrootto `pthread_setspecific'
Fixes: eb60c4054c
- http://autobuild.buildroot.org/results/d67c5a99b7d58826e544f1210fa36bb3bc180739
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised since bump of pcre2 to version
10.43 in commit fa9e575776 and
https://github.com/PCRE2Project/pcre2/commit/014c82d7bcc2873cdb1f3abc5e5348587f477ba4:
tftpd_pcre.c: In function 'tftpd_pcre_open':
tftpd_pcre.c:109:37: error: passing argument 1 of 'pcre2_substring_list_free_8' from incompatible pointer type [-Wincompatible-pointer-types]
109 | pcre2_substring_list_free((const PCRE2_UCHAR **)substrlist);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| const PCRE2_UCHAR8 ** {aka const unsigned char **}
In file included from tftpd_pcre.h:24,
from tftpd_pcre.c:35:
/home/autobuild/autobuild/instance-10/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/include/pcre2.h:949:1: note: expected 'PCRE2_UCHAR8 **' {aka 'unsigned char **'} but argument is of type 'const PCRE2_UCHAR8 **' {aka 'const unsigned char **'}
949 | PCRE2_TYPES_STRUCTURES_AND_FUNCTIONS
| ^
Fixes: fa9e575776
- http://autobuild.buildroot.org/results/46565c834a8162a651944885104027610a65f9c3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Mutt 2.2.13 was released on March 9, 2024. This is a bug-fix release,
fixing a possible dangling pointer reference in the SMTP client.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
And enable BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we can now drop the
defconfig from .checkpackageignore.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
And update the dts path to match the updated location after commit
724ba6751532 ("ARM: dts: Move .dts files to vendor sub-directories").
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The 5.10.10 kernel fails to build with GCC 13.x:
In file included from <command-line>:
drivers/ata/libahci.c: In function ‘ahci_led_store’:
././include/linux/compiler_types.h:315:45: error: call to ‘__compiletime_assert_321’ declared with attribute error: BUILD_BUG_ON failed: sizeof(_s) > sizeof(long)
315 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^
././include/linux/compiler_types.h:296:25: note: in definition of macro ‘__compiletime_assert’
296 | prefix ## suffix(); \
| ^~~~~~
././include/linux/compiler_types.h:315:9: note: in expansion of macro ‘_compiletime_assert’
315 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^~~~~~~~~~~~~~~~~~~
./include/linux/build_bug.h:39:37: note: in expansion of macro ‘compiletime_assert’
39 | #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
| ^~~~~~~~~~~~~~~~~~
./include/linux/build_bug.h:50:9: note: in expansion of macro ‘BUILD_BUG_ON_MSG’
50 | BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition)
| ^~~~~~~~~~~~~~~~
./include/linux/nospec.h:58:9: note: in expansion of macro ‘BUILD_BUG_ON’
58 | BUILD_BUG_ON(sizeof(_s) > sizeof(long)); \
| ^~~~~~~~~~~~
drivers/ata/libahci.c:1137:23: note: in expansion of macro ‘array_index_nospec’
1137 | pmp = array_index_nospec(pmp, EM_MAX_SLOTS);
| ^~~~~~~~~~~~~~~~~~
This is fixed upstream by commit f07788079f515ca (ata: ahci: fix enum
constants for gcc-13), which has been backported to 5.10.x as of 5.10.184,
so bump to v5.10.217 to fix the build.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/6865597717
setuptools.extern.packaging.version.InvalidVersion: Invalid version: 'u-boot-2020.10'
make[5]: *** [scripts/dtc/pylibfdt/Makefile:30: scripts/dtc/pylibfdt/_libfdt.so] Error 1
make[4]: *** [scripts/Makefile.build:419: scripts/dtc/pylibfdt] Error 2
make[4]: *** Waiting for unfinished jobs....
make[3]: *** [scripts/Makefile.build:419: scripts/dtc] Error 2
make[2]: *** [Makefile:577: scripts] Error 2
make[1]: *** [package/pkg-generic.mk:283: /builds/buildroot.org/buildroot/output/build/uboot-2020.10/.stamp_built] Error 2
Commit 6b62384e3d (package/python-setuptools: bump to version 69.0.3)
bumped setuptools, which now errors out when passed a version with a prefix
string. This u-boot- prefix string is dropped since U-Boot 2023.01 with
commit c977b1843504 (libfdt: Fix invalid version warning), so bump U-Boot to
v2024.01 to fix this issue.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Fixes the following warning:
orangepi_r1_defconfig:35:warning: override: reassigning to symbol BR2_PACKAGE_HOST_UBOOT_TOOLS
While we're at it, move the HOST_UBOOT_TOOLS_* options where savedefconfig
would put them.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
This commit bumps the BSP components (U-Boot, Arm Trusted Firmware
and Kernel) to version tn-mickledore_6.1.55-2.2.0_20240417.
While at it, it also enable BR2_DOWNLOAD_FORCE_CHECK_HASHES=y in the
defconfig, to check the archives of this new version. The necessary
hash files are also added. The BR2_GLOBAL_PATCH_DIR moved, due to a
defconfig refresh with a "make savedefconfig".
This commit also removes arm-truster-firmware package patches which
are no longer needed (since they are included in the new version).
Finally, this defconfig fail to build since commit dc0f721
"package/gcc: switch to 13.x as default". Those new BSP components
contains the patches to fix this build issue.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6865597270
Signed-off-by: Julien Olivain <ju.o@free.fr>
[Romain: remove imx8mmpico_defconfig entry in .checkpackageignore]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
And enable BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we can now drop the
defconfig from .checkpackageignore.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The 5.10.79 kernel fails to build with GCC 13.x:
In file included from <command-line>:
drivers/ata/libahci.c: In function ‘ahci_led_store’:
././include/linux/compiler_types.h:315:45: error: call to ‘__compiletime_assert_321’ declared with attribute error: BUILD_BUG_ON failed: sizeof(_s) > sizeof(long)
315 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^
././include/linux/compiler_types.h:296:25: note: in definition of macro ‘__compiletime_assert’
296 | prefix ## suffix(); \
| ^~~~~~
././include/linux/compiler_types.h:315:9: note: in expansion of macro ‘_compiletime_assert’
315 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^~~~~~~~~~~~~~~~~~~
./include/linux/build_bug.h:39:37: note: in expansion of macro ‘compiletime_assert’
39 | #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
| ^~~~~~~~~~~~~~~~~~
./include/linux/build_bug.h:50:9: note: in expansion of macro ‘BUILD_BUG_ON_MSG’
50 | BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition)
| ^~~~~~~~~~~~~~~~
./include/linux/nospec.h:58:9: note: in expansion of macro ‘BUILD_BUG_ON’
58 | BUILD_BUG_ON(sizeof(_s) > sizeof(long)); \
| ^~~~~~~~~~~~
drivers/ata/libahci.c:1137:23: note: in expansion of macro ‘array_index_nospec’
1137 | pmp = array_index_nospec(pmp, EM_MAX_SLOTS);
| ^~~~~~~~~~~~~~~~~~
This is fixed upstream by commit f07788079f515ca (ata: ahci: fix enum
constants for gcc-13), which has been backported to 5.10.x as of 5.10.184,
so bump to v5.10.217 to fix the build.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The python-magic-wormhole runtime test can randomly fail on slow
runners, see [1].
The issue is that the sending command is started first in background
_without_ redirecting its output to /dev/null. The receiving command
is started after, expecting the message to be printed on the first
standard output line. On slower systems, the sending command still
print messages while the test controller expect output from the
receiving command. The expected string finally appear, but not on the
first line. This makes the test fail.
This commit fixes the issue by redirecting all outputs (stdout, stderr)
of the sending command to /dev/null. To help even more, the sleep time
is moved from the emulator to the test controller. The sleep time is
also multiplied by the timeout_multiplier.
Fixes: [1]
[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/6888691508
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
This package pins overly strict numpy dependency versions apparently
for compatibility reasons that don't appear relevant to buildroot.
This package also appears to pin an overly strict setuptools version
for unclear reasons.
See:
https://github.com/jax-ml/ml_dtypes/blob/v0.3.2/pyproject.toml#L51-L55
To fix this lets just set the --skip-dependency-check build option and
ignore the build dependency version mismatches since they don't appear
to cause any build issues.
This error was introduced when we migrated setuptools to pep517 in
8937db8dd5.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6888691520
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Tested-by: Julien Olivain <ju.o@free.fr>
[Romain: add gitlab-ci link]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The patch allows you to choose whether to build encoding (BUILD_WRITERS),
decoding (BUILD_READERS) or both. At least one of the two options must
be enabled. This way, it's possible to keep the library size at minimum.
By default, to ensure backward compatibility, both are compiled.
Co-Developed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Co-Developed-by: Francesco Nicoletta Puzzillo <francesco.nicolettap@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
ivi-homescreen needs C++17 filesystem resulting in the following build
failure with gcc < 8 since its addition in commit
9d8497e79d:
In file included from /home/buildroot/instance-0/output-1/build/ivi-homescreen-5ab78a19e95c88cc5d6b173ab1260a211e78cf0a/third_party/flutter/shell/platform/common/path_utils.cc:5:0:
/home/buildroot/instance-0/output-1/build/ivi-homescreen-5ab78a19e95c88cc5d6b173ab1260a211e78cf0a/third_party/./flutter/shell/platform/common/path_utils.h:8:10: fatal error: filesystem: No such file or directory
#include <filesystem>
^~~~~~~~~~~~
Fixes: 9d8497e79d
- http://autobuild.buildroot.org/results/a5e88d5a4264a6165be31a99f1c123af53fa382e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The recent commits that touched vendoring and hashes, totally missed
the non-native vendored packages, like python packages that contain
rust code, and are thus cargo-vendored.
The issue in this case, is that we need to download the archive as it
is hosted and known to PyPI, but store it locally with our vendoring
suffix. This is inherently conflicting.
Fortunately, the PyPI webserver will ignore the query part of the URL,
so we can request the archive known to PyPI, and append an arbitrary
query, that is automatically constructed with the actual filename we
will use to store it. Basically, an URL for a python package like:
https://pypi.org.pkg/pkg-hash/pkg-vesion.tar.gz
can be turned into:
https://pypi.org.pkg/pkg-hash/pkg-vesion.tar.gz?buildroot-path=filename/python-pkg-version-cargo2.tar.gz
This way, we can use out default _SOURCE value, and construct a _SITE
that contains the actual package URL, with an arbtrary query.
NOTE: this is a stop-gap measure, to quickly fix those packages, while
waiting for a generic solution that works in all cases, not just with
PyPI.
NOTE-2: of course, if PyPI changes its policy, and no longer ignored the
query part, this is going to break again. Hence the need for a generic
solution...
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following python build failure:
In file included from /home/buildroot/instance-0/output-1/host/include/python3.11/Python.h:38,
from /home/buildroot/instance-0/output-1/host/arc-buildroot-linux-gnu/sysroot/usr/include/pybind11/detail/common.h:266,
from /home/buildroot/instance-0/output-1/host/arc-buildroot-linux-gnu/sysroot/usr/include/pybind11/attr.h:13,
from /home/buildroot/instance-0/output-1/host/arc-buildroot-linux-gnu/sysroot/usr/include/pybind11/detail/class.h:12,
from /home/buildroot/instance-0/output-1/host/arc-buildroot-linux-gnu/sysroot/usr/include/pybind11/pybind11.h:13,
from /home/buildroot/instance-0/output-1/build/gr-osmosdr-0.2.4/python/bindings/device_python.cc:1:
/home/buildroot/instance-0/output-1/host/include/python3.11/pyport.h:596:2: error: #error "LONG_BIT definition appears wrong for platform (bad gcc/glibc config?)."
596 | #error "LONG_BIT definition appears wrong for platform (bad gcc/glibc config?)."
| ^~~~~
Fixes:
- http://autobuild.buildroot.org/results/f009958c37902a224512b336fcb431903bdd0b96
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The busybox sysctl applet expects all arguments after -p to be filenames to
read:
sysctl -p file -h
sysctl: -h: No such file or directory
VS:
sysctl -h -p file
sysctl: invalid option -- 'h'
BusyBox v1.36.1 (2024-05-17 15:27:21 CEST) multi-call binary.
Usage: sysctl [-enq] { -a | -p [FILE]... | [-w] [KEY[=VALUE]]... }
Show/set kernel parameters
-e Don't warn about unknown keys
-n Don't show key names
-q Quiet
-a Show all values
-p Set values from FILEs (default /etc/sysctl.conf)
-w Set values
This seems to be the intented behaviour:
https://git.busybox.net/busybox/tree/procps/sysctl.c#n317
Notice: The procps-ng variant is happy with both:
sysctl -p file -h
Usage:
sysctl [options] [variable[=value] ...]
VS:
sysctl -h -p file
Usage:
sysctl [options] [variable[=value] ...]
So pass SYSCTL_ARGS before the -p args so custom sysctl arguments can be
passed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit ee59023794 (package/libvncserver: bump to version 0.9.12)
changes the package from autotools to cmake and accidently inverted the
threads logic.
The reason this was not noticed is that the build system verifies if threads
support works and otherwise disables it even when -DWITH_THREADS=ON is
passed, E.G. for a nothread configuration:
cmake ... -DWITH_THREADS=ON ...
..
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Failed
-- Looking for pthread_create in pthreads
-- Looking for pthread_create in pthreads - not found
-- Looking for pthread_create in pthread
-- Looking for pthread_create in pthread - not found
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
And enable BR2_DOWNLOAD_FORCE_CHECK_HASHES.
Generated by utils/add-custom-hashes, with the (redundant)
linux-headers.hash replaced by a symlink.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr: update .checkpackageignore]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
webkitgtk/wpewebkit needs a host-ruby with yaml support, otherwise the build
fails with errors like:
cd /home/peko/source/buildroot/output/build/webkitgtk-2.42.2/Source/WebCore && \
/home/peko/source/buildroot/output/host/bin/ruby \
/home/peko/source/buildroot/output/build/webkitgtk-2.42.2/Source/WebCore/Scripts/GenerateSettings.rb \
--outputDir /home/peko/source/buildroot/output/build/webkitgtk-2.42.2/WebCore/DerivedSources \
--template /home/peko/source/buildroot/output/build/webkitgtk-2.42.2/Source/WebCore/Scripts/SettingsTemplates/InternalSettingsGenerated.cpp.erb \
--template /home/peko/source/buildroot/output/build/webkitgtk-2.42.2/Source/WebCore/Scripts/SettingsTemplates/InternalSettingsGenerated.idl.erb \
--template /home/peko/source/buildroot/output/build/webkitgtk-2.42.2/Source/WebCore/Scripts/SettingsTemplates/InternalSettingsGenerated.h.erb \
--template /home/peko/source/buildroot/output/build/webkitgtk-2.42.2/Source/WebCore/Scripts/SettingsTemplates/Settings.cpp.erb \
--template /home/peko/source/buildroot/output/build/webkitgtk-2.42.2/Source/WebCore/Scripts/SettingsTemplates/Settings.h.erb \
/home/peko/source/buildroot/output/build/webkitgtk-2.42.2/WTF/Scripts/Preferences/UnifiedWebPreferences.yaml \
/home/peko/source/buildroot/output/build/webkitgtk-2.42.2/Source/WebCore/page/Settings.yaml
/home/peko/source/buildroot/output/host/lib/ruby/3.3.0/yaml.rb:3: warning: It seems your ruby installation is missing psych (for YAML output).
To eliminate this warning, please install libyaml and reinstall your ruby.
We do not currently have any Config.in.host options for ruby or libyaml, but
given how small/fast libyaml is to build just do it unconditionally.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This refers to https://gitlab.com/buildroot.org/buildroot/-/jobs/6813124907
The build error referenced in that link is:
error: command 'swig' failed: No such file or directory
make[4]: *** [scripts/dtc/pylibfdt/Makefile:33: rebuild] Error 1
make[3]: *** [scripts/Makefile.build:397: scripts/dtc/pylibfdt] Error 2
make[2]: *** [Makefile:2014: scripts_dtc] Error 2
make[1]: *** [package/pkg-generic.mk:283: /builds/buildroot.org/buildroot/output/build/uboot-2024.01/.stamp_built] Error 2
make: *** [Makefile:82: _all] Error 2
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT is added to the avenger96_defconfig in order to resolve the issue
Signed-off-by: Marleen Vos <marleen.vos@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 5b847f88fe (board: update hashes for generated achives) updated
the file
board/acmesystems/acqua-a5/patches/at91bootstrap3/at91bootstrap3.hash
by changing the file name suffix: -git3.tar.gz -> -git4.tar.gz. It did
not, however, update the hash itself. Do it now.
Fixes: 5b847f88fe
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
kvmtool now supports riscv, enable it and select BR2_PACKAGE_DTC which
is needed to build it.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The current version dates back to 2017 and is lacking riscv support.
Bump the version to a more recent one (4d2c017f41) which supports riscv
and contains a large number of updates as well a CVE fixes. Since
kvmtool does not seems to have releases, just bump to the current git
HEAD.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 69cb625947 ("package/gcc: enable
obsolete nios2 target") added some handling of nios2 with gcc 14.x,
duplicated between gcc-initial and gcc-final. Let's deduplicate this
logic into the common package/gcc/gcc.mk code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
GCC 14.1.0 deprecated NIOS2 so we need to enable it explicitely.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch is needed for building newlib with gcc 14.1.0. Without this patch,
the following build error will occur:
../../.././libgloss/microblaze/linux-outbyte.c: In function 'outbyte':
../../.././libgloss/microblaze/linux-outbyte.c:3:9: error: implicit declaration of function '_write' [-Wimplicit-function-declaration]
3 | _write(1, &c, 1);
This patch has been submitted upstream:
https://patchwork.sourceware.org/project/newlib/patch/20240513062419.2042278-1-neal.frager@amd.com/
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
0001-configure-add-without-demo-option: adapt patch to 6.0.0 version
Signed-off-by: Michael Fischer <mf@go-sys.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update kernel, TF-A and U-Boot repos to the NXP lf-6.6.3-1.0.0 versions.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
basu is the sd-bus library, extracted from systemd.
Some projects rely on the sd-bus library for DBus support. However not
all systems have systemd or elogind installed. This library provides
just sd-bus (and the busctl utility).
Signed-off-by: Sergey Bobrenok <bobrofon@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is bugfix release of stable libmdbx branch.
The most significant fixes since v0.12.8 (previous version pinned to
buildroot):
- Fixed an major bug inherited from LMDB (Lightning Memory-Mappe
Database) that causes database corruption during use the
MDBX_DUPFIXED mode, and that has existed for more than 10 years.
- Fixed of a false error MDBX_CORRUPTED (-30796) in the scenario of
working in the mode MDBX_DUPFIXED with odd length of multi-values.
- Fixed a bug in adjusting the cursors in the case splitting a page by
adding a new page on the left.
- Troubleshooting an error when opening a database on a read-only file
system.
- A set of C++ API improvements.
The complete ChangeLog:
https://gitflic.ru/project/erthink/libmdbx/blob?file=ChangeLog.md
Signed-off-by: Леонид Юрьев (Leonid Yuriev) <leo@yuriev.ru>
[yann.morin.1998@free.fr: ammend and reflow the commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
FSID daemon and its systemd unit file both depend on
BR2_PACKAGE_NFS_UTILS_RPC_NFSD but they're now always installed. Remove them
both if BR2_PACKAGE_NFS_UTILS_RPC_NFSD is disabled.
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Jan Čermák <sairon@sairon.cz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Pentium M does support SSE2 so it would make sense to enable it.
Signed-off-by: Stefan Ott <stefan@ott.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch add qbee-agent, an open source device management software
for Linux devices.
Signed-off-by: Jon Henrik Bjørnstad <jonhenrik@qbee.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Osmosdr failed to build docs when python support is enabled.
[ 41%] Copying osmosdr docstring templates as pybind headers ...
Traceback (most recent call last):
File "/home/martb/Schreibtisch/DiscoSAT/satos/output/build/gr-osmosdr-0.2.4/docs/doxygen/update_pydoc.py", line 22, in <module>
from doxyxml import DoxyIndex, DoxyClass, DoxyFriend, DoxyFunction, DoxyFile
File "/home/martb/Schreibtisch/DiscoSAT/satos/output/build/gr-osmosdr-0.2.4/docs/doxygen/doxyxml/__init__.py", line 69, in <module>
from .doxyindex import DoxyIndex, DoxyFunction, DoxyParam, DoxyClass, DoxyFile, DoxyNamespace, DoxyGroup, DoxyFriend, DoxyOther
File "/home/martb/Schreibtisch/DiscoSAT/satos/output/build/gr-osmosdr-0.2.4/docs/doxygen/doxyxml/doxyindex.py", line 31, in <module>
from .generated import index
File "/home/martb/Schreibtisch/DiscoSAT/satos/output/build/gr-osmosdr-0.2.4/docs/doxygen/doxyxml/generated/index.py", line 13, in <module>
from . import compound
File "/home/martb/Schreibtisch/DiscoSAT/satos/output/build/gr-osmosdr-0.2.4/docs/doxygen/doxyxml/generated/compound.py", line 15, in <module>
from . import compoundsuper as supermod
File "/home/martb/Schreibtisch/DiscoSAT/satos/output/build/gr-osmosdr-0.2.4/docs/doxygen/doxyxml/generated/compoundsuper.py", line 15, in <module>
import six
ModuleNotFoundError: No module named 'six'
make[2]: *** [python/bindings/CMakeFiles/osmosdr_docstrings.dir/build.make:73: python/bindings/docstring_status] Fehler 1
make[1]: *** [CMakeFiles/Makefile2:332: python/bindings/CMakeFiles/osmosdr_docstrings.dir/all] Fehler 2
Fixes:
http://autobuild.buildroot.net/results/b60e339e52fbc7ed7607a94381aaab6ec64b7a99/
Signed-off-by: Martin Böh <contact@martb.dev>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add -fPIC to CFLAGS to fix the following build failure raised since
commit de6415ad9c:
/home/autobuild/autobuild/instance-5/output-1/host/lib/gcc/x86_64-buildroot-linux-gnu/12.3.0/../../../../x86_64-buildroot-linux-gnu/bin/ld: misc/misc.o: warning: relocation against `stdout@@GLIBC_2.2.5' in read-only section `.text'
/home/autobuild/autobuild/instance-5/output-1/host/lib/gcc/x86_64-buildroot-linux-gnu/12.3.0/../../../../x86_64-buildroot-linux-gnu/bin/ld: log/log.o: relocation R_X86_64_PC32 against symbol `stdout@@GLIBC_2.2.5' can not be used when making a shared object; recompile with -fPIC
Fixes: de6415ad9c
- http://autobuild.buildroot.org/results/0349c6bfd66f5e50429e4a5cc07fb7abf2b07345
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch fixes the following linking failure:
/home/buildroot/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/i586-buildroot-linux-musl/9.3.0/../../../../i586-buildroot-linux-musl/bin/ld: /home/buildroot/instance-0/output-1/host/i586-buildroot-linux-musl/sysroot/lib/libc.a(getopt.o): in function `getopt':
getopt.c:(.text.getopt+0x0): multiple definition of `getopt'; src/getopt.o:getopt.c:(.text+0x0): first defined here
/home/buildroot/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/i586-buildroot-linux-musl/9.3.0/../../../../i586-buildroot-linux-musl/bin/ld: /home/buildroot/instance-0/output-1/host/i586-buildroot-linux-musl/sysroot/lib/libc.a(getopt.o):(.data.optind+0x0): multiple definition of `optind'; src/getopt.o:(.data+0x0): first defined here
Fixes:
- http://autobuild.buildroot.net/results/d5b1b4e5e9d9c8eca5e75c345db4d1f3f0cd84ed
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The python-hid package got tweaked when applied in commit 4432b08790
(package/python-hid: new package) so it now selects
BR2_PACKAGE_HIDAPI, and we therefore do not need to explicitly enable
hidapi in the test.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Our index.html page still points to git.buildroot.net as the Git
repository, and to the defunct gmane for the mailing list
activity. Fix these by pointing to Gitlab and lore respectively.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that gcc 14 was added, we can remove the oldest version of gcc.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In order to add gcc 14 support in follow-up commits, introduce
BR2_TOOLCHAIN_GCC_AT_LEAST_13 symbol.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Switch site to get latest release
- Set ALL_CFLAGS to drop -Werror
- Update hash of README (changes not related to license)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Builds with GCC 14 print the following error
> zip.h:726:10: error: conflicting types for 'memset'; have 'char *(char *, int, unsigned int)'
This is because with GCC 14, Zip incorrectly detects that the memset functions
exist. Which enables the ZMEM flag and declares its own version of memset.
This is because the ./unix/configure script attempts to compile a C file using
'memset' but it does not include the <string.h>. This was allowed in gnu89, but
in GCC 14 -Werror=implicit-function-declaration is enabled by default[1].
We forcefully set '-std=gnu89' so that Zip will compile everything against
gnu89, which suppresses the warning.
[1] https://gcc.gnu.org/gcc-14/porting_to.html#warnings-as-errors
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
opencv and qt handling can be dropped since switch to an active fork in
commit 456a739831 as they are only used
when examples are enabled resulting in the following warning:
CMake Warning:
Manually-specified variables were not used by the project:
BUILD_DOC
BUILD_DOCS
BUILD_EXAMPLE
BUILD_TEST
BUILD_TESTING
BUILD_TESTS
CMAKE_DISABLE_FIND_PACKAGE_OpenCV
CMAKE_DISABLE_FIND_PACKAGE_Qt5
While at it, also drop BUILD_EXAMPLES which is already passed by
pkg-cmake.mk
Fixes: 456a739831
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Disable -Werror to fix the following build failure raised at least since
bump to version 3.9.0 in commit e76d9868c9
and
https://github.com/zhaojh329/libuhttpd/commit/81db1fa371bc80f40c1bfe60010e7d64bdf30b46:
/home/autobuild/autobuild/instance-8/output-1/build/libuhttpd-3.14.1/src/file.c: In function '__serve_file':
/home/autobuild/autobuild/instance-8/output-1/build/libuhttpd-3.14.1/src/file.c:322:50: error: format '%llu' expects argument of type 'long long unsigned int', but argument 4 has type '__off_t' {aka 'long int'} [-Werror=format=]
322 | conn->send_header(conn, "Content-Range", "bytes */%" PRIu64, st->st_size);
| ^~~~~~~~~~~ ~~~~~~~~~~~
| |
| __off_t {aka long int}
In file included from /home/autobuild/autobuild/instance-8/output-1/build/libuhttpd-3.14.1/src/file.c:36:
/home/autobuild/autobuild/instance-8/output-1/per-package/libuhttpd/host/mips64el-buildroot-linux-uclibc/sysroot/usr/include/inttypes.h:91:41: note: format string is defined here
91 | # define PRIu64 __PRI64_PREFIX "u"
cc1: all warnings being treated as errors
Fixes: e76d9868c9
- http://autobuild.buildroot.org/results/46349a1409f9cff027b462456078284459e75511
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
mokutil is a tool to import or delete the machines owner
keys (MOK) stored in the database of shim.
"shim" is the first stage bootloader to support UEFI Secure
Boot. See also the "shim" package in the bootloaders
section.
https://github.com/lcp/mokutil
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The rock5b_defconfig contained a
# BR2_LINUX_KERNEL_INTREE_DTS_NAME is not set
line. This caused check-dotconfig.py to throw a warning in the
buildroot CI, because the explicit unsetting of the parameter is not
taken on in the actual dotconfig, but instead the dotconfig will
contain the line 'BR2_LINUX_KERNEL_INTREE_DTS_NAME=""'.
This patch removes the parameter from the rock5b_defconfig. The
resulting dotconfig from the original rock5b_defconfig and the
rock5b_defconfig without the parameter is identical, but the
check-dotconfig.py does not throw a warning anymore.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Release notes: https://www.postgresql.org/docs/release/16.2/
The hash of the license file is updated due to a change in copyright
years:
-Portions Copyright (c) 1996-2023, PostgreSQL Global Development Group
+Portions Copyright (c) 1996-2024, PostgreSQL Global Development Group
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Install janus to staging directory so that external plugins can be built.
Signed-off-by: Leo Soares <leojrfs@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Buildroot commit f95069814b disabled the
build of test programs unconditionally without considering the option
BR2_PACKAGE_LIBDRM_INSTALL_TESTS.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changes:
- Remove 0001-fix-musl-build.patch
Fixed with commit d88597798fdb1a2b344ca47e48f2f80ad433fd95 differently.
"""
libselinux: drop usage of _D_ALLOC_NAMLEN
_D_ALLOC_NAMLEN is not very portable. Currently, the code
mallocs based on _D_ALLOC_NAMLEN() and then strcpy's dirent
d_name into the buffer. Instead, just use strdup.
Change-Id: I5c8ca47da2c593ea2726caba5781f5e9d9d910ae
Signed-off-by: William Roberts <william.c.roberts@intel.com>
"""
- Remove 0003-libselinux-set-CFLAGS-for-pip-installation.patch
Fixed with commit 89dd980c1e9a800f104c1db2b4c9e77be532ca35.
"""
Add CPPFLAGS to Makefiles
This patch adds CPPFLAGS to all of the Makefiles as suggested.
Signed-off-by: Cameron Williams <ckwilliams.work@gmail.com>
Acked-by: James Carter <jwcart2@gmail.com>
"""
- Rename 0002-Do-not-use-PYCEXT-and-rely-on-the-installed-file-nam.patch to
0001-Do-not-use-PYCEXT-and-rely-on-the-installed-file-nam.patch
- Remove "package/libselinux/0001-fix-musl-build.patch Upstream" from
.checkpackageignore
- Rename "0002-Do-not-use-PYCEXT-and-rely-on-the-installed-file-nam.patch" to
"0001-Do-not-use-PYCEXT-and-rely-on-the-installed-file-nam.patch" in the
.checkpackageignore
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since bump to version 2.0.0 in commit
0f5bb364c6 sdbus-cpp package requires
designated initializers support (C++20 feature), and fails to compile
with gcc < 8:
/home/buildroot/autobuild/run/instance-2/output-1/build/host-sdbus-cpp-2.0.0/src/Proxy.cpp: In member function 'virtual sdbus::Slot sdbus::internal::Proxy::callMethodAsync(const sdbus::MethodCall&, sdbus::async_reply_handler, uint64_t, sdbus::return_slot_t)':
/home/buildroot/autobuild/run/instance-2/output-1/build/host-sdbus-cpp-2.0.0/src/Proxy.cpp:146:90: sorry, unimplemented: non-trivial designated initializers not supported
, .floating = true });
Fixes: 0f5bb364c6
- http://autobuild.buildroot.net/results/1764ce0d48b390e430d2d8f54388013d3700e9d7
Signed-off-by: Sergey Bobrenok <bobrofon@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some kernel users find it useful to store submodules in the kernel
source tree for cross source trees definitions. Add option to download
these submodules.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Our git download backend switches the remote of our local clone, and
fetches all refs and tags from that remote.
When the local clone has a tag fetched from another remote, and the new
remote also has a tag by the same name, and that tag points to another
commit, then git refuses to fetch the new tag and exits in error, as it
considers that the new tag would clobber the existing one. This is safe
and sane behaviour when run interactively with a human that can take a
decision.
However, in our case, we don't care about any tags that were present
before, as only the last one makes sense in our case: the one from the
remote the user has requested for the current build.
Tell git to forcefully pull tags, even if they would clobber existing
ones.
Note that, although this changes the git backend, it does not change the
content of generated archives, so we do not need to bump the suffix
version.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Since tar *will* generate different archives, virtually all hashes will
change, so drop the blurb that states they usually would not.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Arnout: say explicitly that the has will change]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
We can't stay in the past forever and ever...
Since tar 1.35, the way some fields (devmajor and devminor) are stored
has changed. These fields exist for each file in the tarball, but only
used for device nodes. In previous versions of GNU tar, they were set to
zero; since 1.35, they are set to empty.
Although this doesn't change anything about the content of the tarball,
and it will be extracted in exactly the same way regardless of the tar
version used for extracting, it does change the hash of the tarball.
Therefore, we have to
- make sure that the correct version of tar is used;
- update the format version so that the filename is different from
before.
Increment all BR_FMT_VERSION by one.
Require tar >= 1.35 instead of < 1.35.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Arnout: also increment BR_FMT_VERSION and extend the commit message]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Fix CVE-2022-48303: GNU Tar through 1.34 has a one-byte out-of-bounds
read that results in use of uninitialized memory for a conditional
jump. Exploitation to change the flow of control has not been
demonstrated. The issue occurs in from_header in list.c via a V7
archive in which mtime has approximately 11 whitespace characters.
With the bump to 1.35, the build will fail on systems that are not
Y2038, such as some uClibc configurations.
In order to preserve the previous behavior, pass --disable-year2038.
See the gnulib documentation for details [1]. Contrary to what the
option name might suggest, it doesn't really disable Y2038 support,
but only the check that the system is Y2038 compliant. So even with
--disable-year2038, if the system is Y2038 compliant (uses a 64-bit
arch, uses the musl C library, or uses the glibc C library with
BR2_TIME_BITS_64=y), tar will be Y2038 compliant.
Update hash of COPYING (http replaced by https)
[0] https://lists.gnu.org/archive/html/info-gnu/2023-07/msg00005.html
[1] https://www.gnu.org/software/gnulib/manual/html_node/Avoiding-the-year-2038-problem.html
For the version bump:
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit d4d483451f)
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
For the Y2038 fix:
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 7f1088f9ca)
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Replace the names of the tarballs in the hash files to -git3.
Linux and U-Boot sources do contain symlinks, so the hashes change.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Arnout: also update acmesystems/acqua-a5]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Replace all git and svn packages archive names in hash files:
$ sed -r -i -e 's/-br2/-git3/; s/-br3/-svn4/' $(
git grep -l -E -- '-br2|-br3' '*.hash'
)
$ sed -r -i -e 's/(\.tar\.gz)$/-go1\1/' $(
git grep -l -E '\$\(eval \$\((host-)?golang-package\)\)' '*.mk' \
|sed -r -e 's/\.mk$/.hash/' \
|sort -u
)
$ sed -r -i -e 's/(\.tar\.gz)$/-cargo1\1/' $(
git grep -l -E '\$\(eval \$\((host-)?cargo-package\)\)' '*.mk' \
|sed -r -e 's/\.mk$/.hash/' \
|sort -u
)
Then a bit of make source (based on: git diff --name-only), a lot of
sweat, and carefully checking the new archives to verify that only
modes have changed...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Replace the names of the tarballs in the hash files to -git3.
We don't have any symlinks in the tests, so the hashes themselves don't
change.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Currently, when we generate archives, we rely on a few assumptions and
mechanisms to ensure reproducilibity. So far, we mostly accounted for
the content (i.e. content, filenames, and path) of the files we
archived, and this is OK (git and svn should provide reproducilbe
content by design, and cargo and go vendoring are also supposed to be
generating reproducible content.
However, tarballs do not only contain the content of the files; they
also have a few metadata about those files. Beyond filenames and paths,
which are already reproducible, there is the timestamp, the user and
group name and ID. Those are also accounted for and made reproducible.
The final touch (so far!) is that files have access rights (aka mode),
and those too are stored in tarballs. So far we accounted for those by
ensuring that Buildroot would always run under a known umask, thus
generating files with reproducible modes.
That falls short in one case that we did not envision, though: a shared
download directory, where extended attributes are set to provide a
default ACL that is permissive, to allow two or more users (with
different uid and gid) to all read and write to such a directory. This
is trivially achieved with something like:
$ mkdir -p "${BR2_DL_DIR}"
$ setfacl -m 'default:user::rwx' "${BR2_DL_DIR}"
$ setfacl -m 'default:group::rwx' "${BR2_DL_DIR}"
$ setfacl -m 'default:other::rwx' "${BR2_DL_DIR}"
This has the effect that:
- files below BR2_DL_DIR are all set with user, group, and world read
and write access,
- files executable by the owner will also be group and world
executable,
- directories are user, group, and world readable, writable, and
searchable.
This means that all the archives we generate from files in BR2_DL_DIR
will have modes that are different from those generated on other systems,
where only the traditional umask is used.
There are various solutions to solve that issue:
- detect the situation and abort: that's not nice, because users have
a legitimiate reason to want to share that directory,
- find a solution for each affected download mechanism: git, svn, hg,
cvs, bzr... and for each of the affected vendoring mechanism: go and
cargo [0]; this is not nice, because it means a lot of repetition,
with the risk that they diverge over time (e.g. one is fixed for a
newer issue, while the others are left out due to an oversight...)
- find a single, common solution that works in all cases, whatever the
download mechanism and/or vendoring: this is the best, because we
can extend and fix it once and everything else benefits from it.
We obviously go for the third option.
The common solution is rather simple. When creating the tarball in
support/download/helpers, give an option to tar to set the group and
other permissions to those of the user, but without write permission.
This implies that we must bump the version-suffix for the download
backends [1] and for the vendoring post-processes. It also implies that
the hash may change, under the following circumstances:
- Symlinks normally have permissions 0777 (because symlink permissions
are in fact meaningless). They will now have permission 0755 in the
tarball.
- If the original tarball (for vendored go and cargo packages) contained
files that are readable or executable by owner but not by group or
other, they will now be readable resp. executable by group and other
too. Note that for writeable it is not the case, because those were
already handled by our 0022 umask (which makes them not writeable by
group and other).
Because the hash may change, we need to update the BR_FMT_VERSION for
everything that creates tarballs. Go and cargo didn't have one up to
now, the the previous commit added the possibility to give one. The ones
for git and svn have to be updated. Since it is now possible to have a
suffix for both the VCS and the post-processing, change the suffix to
something more descriptive than "-brX", i.e. -git3 for git, -go1 for
golang, etc.
The hash updates and filename changes will be handled in a follow-up
commit.
[0] Note however that the vendoring is currently not done in a
sub-directory of BR2_DL_DIR, but the cargo and go caches are located
there. Files that get copied from there to the vendoring area would be
tainted as well, and thus we want to address that situation as well.
[1] we currently do not have a CVS version suffix, because we do not
guarantee the reproducilibity of CVS archives (we can't); for hg, we are
currently using hg's own archive tool, and presumably that does not have
the mode issue because it is not using the checked-out files. Still,
doing the mode fix in a single location will help extend those two
backends in the future (if that ever happens...).
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
When we change the way we vendor packages, either because our download
backend or helpers evolve, or when the vendoring tools themselves change,
we must avoid generating new archives with the same name, or there would
be confusion when using older archives with newer Buildroot versions, or
the other way around (and that would mess with local caches, like the
one we share on s.b.o).
This is going to be the case for example, when we enforce a better and
more reproducible set of modes on archived files in the following
commits.
Introduce a version suffix for post-processed downloads, that we can
bump when needed.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Add the changes about export-subst in the git backend, to the migrating
section of the manual.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: slightly extend the message, add sed command to update hash
files]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The version suffix for the git-generated archives has changed, so update
the filenames accordingly in the hash files. The content of the archives
has not changed, though.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Those packages use the export-subst git attribute, so the content of
the generated archives change.
Update the hashes accordingly.
For pcm-tools, we no longer need the post-extract hook, as the git
attribute is properly handled in the git download backend.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Files in a git repository can be given attributes, like the usual eol
that can convert to-from crlf, cr, lf; those are applied when comitting
or checking-out a file.
There are also two attributes that are meant to be used when generating
an archive (with git archive): export-subst, and export-ignore, that
respectively substitutes format placeholders in a file, and excludes a
file from the archive.
Some package (e.g. pcm-tools, luajit) use the export-subst attribute
to generate versioning information. luajit, specifically, uses the UNIX
timestamp of the commit as the patch-level for its semantic versioning.
We don't use git-archive, because we need to get submodules and LFS
blob, which git-archive does not handle. So, our git backend tries to
impersonate git-archive as much as possible, but the support for git
attributes was lost when we converted it from using git-archive to
manually creating the tarball in 3abd5ba424 (support/download/git: do
not use git archive, handle it manually) in preparation for f109e7eeb5
(support/download/git: add support for submodules) (arguably, a long
time ago...)
Extend the git backend to handle the export-subst attribute. There is
no git tool (that we could find) that does that automatically, except
git-archive, which we can't use; "git check-attr" however can report
whether a file has a specific attribute (and git check-attr can work
with \0-delimited fields and records).
So, we iterate over all the files in the repository, and filter those
that have the export-subst attribute set. Then for each file, we use a
bit of awk to do the replacement:
- for each line (managed natively by awk), we iterate over each
format placeholder,
- for each placeholer, we query "git log" with the requested format,
- we emit the replacement.
When doing the replacement, we decided to force abbreviating short
hashes to 40 chars, which is the length of a full sha1, rather than
actually abbreviating them:
- letting git decide of the length is not reproducible over time:
- as new commits are added, the short length will increase to avoid
collisions,
- newer git versions may decide on a different heuristic to shorten
hashes,
- users may have local settings with an arbitrary length (in their
~/.gitconfig for example);
- deciding on our side of an "small" arbitrary value would not be
viable long term either, as it might be too large to be minimum, or
too short to avoid collisions.
The only reproducible solution is to use unabbreviated hashes.
Handling git-attributes also implies that the format of the generated
archives has changed, since we now expand placeholders, so we bump our
git format version.
Hash files for all git-downloaded packages will be updated in followup
commits.
Of all our git-downloaded packages, 5 are affected, and their hashes
will be updated in a followup commit too:
- pcm-tools, which was known, and the one that triggered this commit;
since we now expand placeholders, we can drop the post-extract hook;
switching to a full hash in replacements also changes the hash of
the generated archive;
- qt5knx, qt5location, qt5mqtt, and qt5opcua: the file .tag at the
repository root, contains only the full hash placeholder; that file
is not used at all during the build (AFAICS);
Finally, a sixth package, luajit, uses export-subst; it currently relies
on the github-generated archive (because it happens to currently use a
format that is reproducible); it will also be converted in a follow-up
patch.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Woody Douglass <wdouglass@carnegierobotics.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Francois Perrad <fperrad@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Since version 2.1, LuaJIT follows a rolling-release scheme, which means
that any commit is as good as any other; LuaJIT uses the comitter's UNIX
timestamp as its semver patch level. It uses the git-attribute
export-subst for the .relver file that contains the %ct placeholder for
git-archive to expand it.
In c9dcd9e459 (package/luajit: bump to version 41fb94defa8f...), we
switched to such an upstream version. There was some confusion around
the handling of the git-attribute and where/when it is generated, and
the first revision of the patch used the git download method, so had to
use post-extract hooks to do the replacement, but the second iteration
kept retrieving the archive generated by github, which has the
replacement already done, but the post-extract hooks were not dropped
although now useless...
With the current code, it is easy to bump the LuaJit version and forget
to update the timestamp stored in the .relver file, which would override
the value that was generated on the github side.
Since the post-extract hook is useless, drop it.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Francois Perrad <fperrad@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit 631647f4a7 (package/flutter-packages/flutter-markdown-example:
new package) introduced a set of flutter packages, all sharing the same
upstream location and sources, and thus introduced a set of shared
variables (not unlike the qt5, qt6, and a few other similar packages).
Especially, it introduced the corresponding _SOURCE variable, that is
referenced by each sub-package of flutter-packages. Defining this
variable is required, because flutter-packages itself is not a package
in Buildroot parlance: it does not call any of the *-package macro. As
such, the default _SOURCE variable is not automatically generated.
The value for the variable was suffixed with the -br1 version-suffix as
used for the archives generated by the git backend.
However, this archive is not generated with our git download backend,
but is generated remotely by github, as the _SITE is computed with our
github helper macro.
So, the -br1 suffix is both superfluous and confusing.
Drop the suffix to avoid any confusion in the future, and add a little
blurb explaining the situation close to where the variable is set, and
add a check-package disable line.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Adam Duskett <adam.duskett@amarulasolutions.com>
[Arnout: use check-package disable comment instead of ignoring the file]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The upstream host, arago-project.org, has vanished, bringing down the
git repository with it.
Switch to another, github-hosted repository, that has the commit we're
interested in.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The current version of docker-compose is un-vendorable, because the
dependencies it referenmces (directly or indirectly) are not available:
go: github.com/docker/compose/v2/cmd/compose imports
github.com/moby/buildkit/util/progress/progressui:
github.com/crazy-max/buildkit@v0.7.1-0.20240130133234-d9aa289bd124:
invalid version: unknown revision d9aa289bd124
And indeed, that commit does not exist in that repository. The v0.7.1
tag does exist, but there is not commit that matches the short hash
d9aa289bd124, or even the whole version string. Sigh...
There is no way anyone can vendor the version we currently package, and
all they and us can hope for is that we never lose s.b.o ever.
Bump the version. That one can be vendored. Well, at least it can
_still_ be vendored _now_...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
SymPy is a Python library for symbolic mathematics. It aims
to become a full-featured computer algebra system (CAS)
while keeping the code as simple as possible in order to be
comprehensible and easily extensible. SymPy is written
entirely in Python.
https://www.sympy.org/
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
mpmath is a free (BSD licensed) Python library for real and
complex floating-point arithmetic with arbitrary precision.
https://mpmath.org/
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While bumping kodi, we figured out that the kodi-texturepacker and
kodi-jsonschemabuilder were both re-downloading the main Kodi tarball,
even though they contain:
KODI_JSONSCHEMABUILDER_DL_SUBDIR = kodi
KODI_TEXTUREPACKER_DL_SUBDIR = kodi
Both are host packages, and turns out that changing those variables to
HOST_ ones made the download sharing work.
Commit efa7712b09 ("package/pkg-generic:
host variant inherits target download settings") introduced
inheritance of host variables from target variables from a number of
variables, including DL_SUBDIR. But it missed the fact that earlier in
pkg-generic.mk, the following line was defined:
$(2)_DL_SUBDIR ?= $$($(2)_RAWNAME)
So, when this later code kicked in:
ifndef $(2)_DL_SUBDIR
ifdef $(3)_DL_SUBDIR
$(2)_DL_SUBDIR = $$($(3)_DL_SUBDIR)
endif
endif
In fact it never did anything because $(2)_DL_SUBDIR would never be
undefined. This commit fixes this issue by properly adjusting the
logic to inherit the value of the target variable when it exists, or
defaulting to $$($(2)_RAWNAME) otherwise.
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The Config.in comment was mentioning both "NPTL" and "threads" as
dependencies, while mentioning only the former is sufficient.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When ImageMagick is selected, the "zbarimg" program is compiled and
installed on target. It allows to decode a QR code from an image file.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds support for BeagleBone AI-64 board by introducing the
beagleboneai64_defconfig file and related support files.
The BeagleBone AI-64 uses the TI J721E SoC, also known as DRA829, also
known as TDA4VM.
Retrieve BSP settings from meta-ti (may be useful for other TI boards):
- This defconfig requires u-boot binman support added in u-boot since
2023.10.
See FOSDEM 2024 talk by TI folks about Binman and how it simplify
the overall boot-loader build flow [1].
- Set BR2_TARGET_ARM_TRUSTED_FIRMWARE_TARGET_BOARD = "generic"
meta-ti]$ git grep TFA_BOARD
meta-ti-bsp/conf/machine/beagleplay.conf:TFA_BOARD = "lite"
meta-ti-bsp/conf/machine/include/am62axx.inc:TFA_BOARD = "lite"
meta-ti-bsp/conf/machine/include/am62pxx.inc:TFA_BOARD = "lite"
meta-ti-bsp/conf/machine/include/am62xx.inc:TFA_BOARD = "lite"
meta-ti-bsp/conf/machine/include/am64xx.inc:TFA_BOARD = "lite"
meta-ti-bsp/conf/machine/include/am65xx.inc:TFA_BOARD = "generic"
meta-ti-bsp/conf/machine/include/j7200.inc:TFA_BOARD = "generic"
meta-ti-bsp/conf/machine/include/j721e.inc:TFA_BOARD = "generic"
meta-ti-bsp/conf/machine/include/j721s2.inc:TFA_BOARD = "generic"
meta-ti-bsp/conf/machine/include/j722s.inc:TFA_BOARD = "lite"
meta-ti-bsp/conf/machine/include/j784s4.inc:TFA_BOARD = "j784s4"
- Set BR2_TARGET_UBOOT_NEEDS_ATF_BL31 to provide BL31 variable pointing
to ATF bl31.bin to the U-Boot build process [2].
- Set BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_OPTEE to OP-TEE as BL32
secure payload. meta-ti set "SPD=opteed" to build ATF [3].
- Set BR2_TARGET_OPTEE_OS_PLATFORM to "k3-j721e".
meta-ti uses the OPTEEMACHINE to set optee-os platform [4].
meta-ti]$ git grep OPTEEMACHINE
meta-ti-bsp/conf/machine/am437x-hs-evm.conf:OPTEEMACHINE = "ti-am43xx"
meta-ti-bsp/conf/machine/am57xx-hs-evm.conf:OPTEEMACHINE = "ti-am57xx"
meta-ti-bsp/conf/machine/beagleplay.conf:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/dra7xx-hs-evm.conf:OPTEEMACHINE = "ti-dra7xx"
meta-ti-bsp/conf/machine/include/am62axx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am62pxx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am62xx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am64xx.inc:OPTEEMACHINE = "k3-am64x"
meta-ti-bsp/conf/machine/include/am65xx.inc:OPTEEMACHINE = "k3-am65x"
meta-ti-bsp/conf/machine/include/j7200.inc:OPTEEMACHINE = "k3-j721e"
meta-ti-bsp/conf/machine/include/j721e.inc:OPTEEMACHINE = "k3-j721e"
meta-ti-bsp/conf/machine/include/j721s2.inc:OPTEEMACHINE = "k3-j784s4"
meta-ti-bsp/conf/machine/include/j722s.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/j784s4.inc:OPTEEMACHINE = "k3-j784s4"
- Use j721e_beagleboneai64_a72 and j721e_beagleboneai64_r5 u-boot
defconfigs introduced in u-boot v2024.04.
- u-boot distroboot (bootflow) detect extlinux.conf file from the first
SDcard partition, se we have to install the kernel and its dtb file.
Use devicetreedir instead of devicetree in extlinux.conf file to
avoid hardcoding the devicetree file name. TI boards are able to
retrieve dtb file name from an EEPROM (see TI_I2C_BOARD_DETECT in
uboot).
- Provide a hash file for all custom package version
(arm-trusted-firmware, linux, ti-k3-r5-loader, uboot) to enable
BR2_DOWNLOAD_FORCE_CHECK_HASHES.
[1] https://fosdem.org/2024/schedule/event/fosdem-2024-3067-standardizing-the-generation-and-signing-of-boot-images/
[2] https://git.yoctoproject.org/meta-ti/commit/?id=e74b9a1746d4d04757c87c1920a0f743e55ff096
[3] https://git.yoctoproject.org/meta-ti/tree/meta-ti-bsp/recipes-bsp/trusted-firmware-a/trusted-firmware-a-ti.inc?h=09.02.00.004#n7
[4] https://git.yoctoproject.org/meta-arm/tree/meta-arm/recipes-security/optee/optee-os.inc?h=4.0.3#n23
More information about the board can be found at:
https://www.beagleboard.org/boards/beaglebone-ai-64
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Selecting pipewire is not possible due to reverse dependencies:
package/gstreamer1/gstreamer1/Config.in:5:error: recursive dependency detected!
package/gstreamer1/gstreamer1/Config.in:5: symbol BR2_PACKAGE_GSTREAMER1 is selected by BR2_PACKAGE_PIPEWIRE_GSTREAMER
package/pipewire/Config.in:35: symbol BR2_PACKAGE_PIPEWIRE_GSTREAMER depends on BR2_PACKAGE_PIPEWIRE
package/pipewire/Config.in:1: symbol BR2_PACKAGE_PIPEWIRE is selected by BR2_PACKAGE_KODI_PIPEWIRE
package/kodi/Config.in:220: symbol BR2_PACKAGE_KODI_PIPEWIRE depends on BR2_PACKAGE_KODI
package/kodi/Config.in:54: symbol BR2_PACKAGE_KODI depends on BR2_PACKAGE_PYTHON3
package/python3/Config.in:5: symbol BR2_PACKAGE_PYTHON3 is selected by BR2_PACKAGE_JACK2_DBUS
package/jack2/Config.in:33: symbol BR2_PACKAGE_JACK2_DBUS depends on BR2_PACKAGE_JACK2
package/jack2/Config.in:1: symbol BR2_PACKAGE_JACK2 is selected by BR2_PACKAGE_FLUIDSYNTH_JACK2
package/fluidsynth/Config.in:38: symbol BR2_PACKAGE_FLUIDSYNTH_JACK2 depends on BR2_PACKAGE_FLUIDSYNTH
package/fluidsynth/Config.in:1: symbol BR2_PACKAGE_FLUIDSYNTH is selected by BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_FLUIDSYNTH
package/gstreamer1/gst1-plugins-bad/Config.in:438: symbol BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_FLUIDSYNTH depends on BR2_PACKAGE_GSTREAMER1
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Removed patch from kodi-imagedecoder-heif which is included in upstream
release.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Removed patch from kodi-audiodecoder-timidity which is included in
upstream release.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As part of the review process of the ivi-homescreen package, which
landed in commit 9d8497e79d, it was
deemed that the dependency on BR2_TOOLCHBAIN_HAS_THREAD_NPTL was not
needed, as it was implied by glibc. According to the commit log:
[yann.morin.1998@free.fr:
- propagate BR2_PACKAGE_HOST_FLUTTER_SDK_BIN_ARCH_SUPPORTS to comments
- drop NPTL, implied by glibc
- reorder dependencies in a more logical way
- reorder comments
- drop undefined BR2_PACKAGE_IVI_HOMESCREEN_HAS_CLIENT
- grammar ("for to change")
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
However, while the BR2_TOOLCHBAIN_HAS_THREAD_NPTL dependency was
removed from the BR2_PACKAGE_IVI_HOMESCREEN option definition, the
corresponding dependency in the Config.in comment was not
dropped. Let's bring things back in sync.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
bpftool supports RISC-V, including rv64 and rv32, so let's enable the
bpftool package on RISC-V.
Signed-off-by: Chen Pei <cp0613@linux.alibaba.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump also apparmor relative package.
Change also the download URL to gitlab where the development
activities were moved.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The following defconfig:
BR2_aarch64=y
BR2_cortex_a72=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_INIT_NONE=y
BR2_SYSTEM_BIN_SH_NONE=y
# BR2_PACKAGE_BUSYBOX is not set
BR2_PACKAGE_GSTREAMER1=y
BR2_PACKAGE_GST1_PLUGINS_BASE_LIB_OPENGL=y
BR2_PACKAGE_GST1_PLUGINS_GOOD=y
# BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_AVI is not set
# BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_ISOMP4 is not set
# BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_WAVPARSE is not set
BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_QMLGL=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_OPENGL_EGL=y
BR2_PACKAGE_MESA3D_OPENGL_ES=y
BR2_PACKAGE_QT5=y
BR2_PACKAGE_WAYLAND=y
# BR2_TARGET_ROOTFS_TAR is not set
fails to build in gst1-plugins-good, with:
build/gst1-plugins-good-1.22.9/ext/qt/meson.build:48:4: ERROR: Problem encountered: qt5 qmlglsink plugin is enabled, but qt specific tools were not found
This is due to qt5tools being missing. This commit adds this missing
dependency.
Signed-off-by: Charles Hardin <ckhardin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For host build the runtime dependencies have to be added. Also the setup
type needs to be set to 'setuptools'.
./output/host/bin/python ./support/testing/tests/package/sample_python_yamllint.py
Traceback (most recent call last):
File "/home/hthiery/sources/mainline/buildroot/support/testing/tests/package/sample_python_yamllint.py", line 3, in <module>
from yamllint import (config, linter)
File "/home/hthiery/sources/mainline/buildroot/output/host/lib/python3.11/site-packages/yamllint/config.py", line 19, in <module>
import pathspec
ModuleNotFoundError: No module named 'pathspec'
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reported-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The lvm2 package now enables the required Kernel configuration. The
Kernel config fragment included in this test is no longer needed.
This commit removes it.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
LVM2 has a hard dependency on the device-mapper presence in the Kernel.
This commit enables those mandatory Kernel configuration by defining
the _LINUX_CONFIG_FIXUPS macro. This will make sure the final system
image will end up in a working configuration.
This was suggested by Arnout in [1].
[1] https://lists.buildroot.org/pipermail/buildroot/2024-April/688776.html
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When building on hosts with libstdc++ without demangle support this error
shows up:
checking for __cxa_demangle in -lstdc++... no
configure: error: __cxa_demangle not found in libstdc++, use --disable-demangler to disable demangler support.
make[1]: *** [package/pkg-generic.mk:273: /home/giuliobenetti/br_reproduce/c2524c7580d97f7387ec22da62be71d77f2ed8ec/output/build/host-elfutils-0.189/.stamp_configured] Error 1
make: *** [Makefile:23: _all] Error 2
So let's disable demangler for host by default.
Fixes: still not showed by autobuilders. Reproduced on Ubuntu 22.04 with
Ubuntu APT g++ 11.4.0
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
pppd fails to start on a systems with buildroot 2024.02.x because of
missing pppd directory in /var/run. There are some logs hinting at this
issue:
Warning: couldn't open ppp database /var/run/pppd/pppd2.tdb
Can't create lock file /var/run/pppd/lock/LCK..ppp-tty-fifo1: No such file or directory
Can't create lock file /var/run/pppd/lock/LCK..ppp-tty-fifo1: No such file or directory
Can't create lock file /var/run/pppd/lock/LCK..ppp-tty-fifo1: No such file or directory
Can't create lock file /var/run/pppd/lock/LCK..ppp-tty-fifo1: No such file or directory
Can't create lock file /var/run/pppd/lock/LCK..ppp-tty-fifo1: No such file or directory
Can't create lock file /var/run/pppd/lock/LCK..ppp-tty-fifo1: No such file or directory
Can't create lock file /var/run/pppd/lock/LCK..ppp-tty-fifo1: No such file or directory
The issue has already been detected and fixed upstream (see [1]) and is
expected to be released on a v2.5.1, but this release seems to be stalled
for now (see [2]). Bump on current master, which currently reflects what
will likely be the 2.5.1.
[1] https://github.com/ppp-project/ppp/issues/419
[2] https://github.com/ppp-project/ppp/issues/460
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Replace description of specific module names with generic help string
because the implementation switched to globbing to collect all rtl88*
blobs.
Signed-off-by: Gero Schwäricke <gero.schwaericke@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use generic pattern rtl88*.bin to install all binary blobs. The
difference with the current version of linux-firmware is that this
will additionally install the rtl_bt/rtl8852cu_fw_v2.bin file, which
is used by the drivers/bluetooth/btrtl.c Linux kernel driver since
Linux 6.6.
Signed-off-by: Gero Schwäricke <gero.schwaericke@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bumps OP-TEE client package version to OP-TEE release 4.2.0.
Removes the local patch related to build failure as the changes are
integrated into mailine repository before 4.2.0.
Signed-off-by: Nayab Sayed <nayabbasha.sayed@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Following the removal of a number of patches in commit
b37e4a5f56 ("package/python3: drop
unnecessary patches"), this commit renumbers the renaming patches, and
refreshes them as well so they apply cleanly with "git am".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Many moons ago, in the dark ages of Python, cross compiles were largely
unsupported. In these before-times, a patchset used by PtxDist [0] [1]
was adapted to help make cross compiles work.
The patchset did a number of things but mainly:
1) used a build-machine compatible python interpreter for certain
stages of the target Python build process
2) made adjustments to certain files to make decisions based on values
set in environment variables instead of the path of the executing
Python interpreter.
Since the path of the interpreter that was build machine compatible was
outside of the target build directory, the code that made assumptions
about the location of headers and library paths being relative to the
interpreter path needed to be adjusted, hence them being driven via
environment variables.
The patchset worked by replacing the executable path to be the sysroot
which included the python headers and libraries.
A number of issues regarding cross compilation [2] [3] [4] have since
been closed since the introduction of this patchset and cross builds
became much better supported starting in Python v3.3.1.
New logic primarily uses the _PYTHON_PROJECT_BASE env variable [5] [6].
When set properly, this drives a few things:
* flags a cross compile environment
* sysconfig.is_python_build = True which triggers:
* altered paths for finding the Makefile and config.h
* altered sysconfig.get_config_var("srcdir")
When migrating to Python 3.4, PtxDist reworked their patchset to use
the standard environment variables for their cross compiles [7].
The distutils module was a primary consumer of the custom variables from
the previous patchset, however, that module is deprecated and packages
cannot target it as of 09de823c.
Package builds and unit tests seem to work without using these variables
being set, implying they can likely be dropped. Packages that still use
distutils should be updated to reflect its removal in 3.12.
Once these custom variables are removed, the following Python3 patches
which leverage them can be dropped:
0004-Adjust-library-header-paths-for-cross-compilation
0009-Do-not-adjust-the-shebang-of-Python-scripts-for-cros
[0]: https://gitlab.vahanus.net/ptxdist/ptxdist/-/commit/eef994411c20653cde95b35266000e3a8754e3b3
[1]: https://gitlab.vahanus.net/ptxdist/ptxdist/-/commit/6c79cb5ac373b1cccf531e8be3ed1b9722ed1622
[2]: https://github.com/python/cpython/issues/48004
[3]: https://github.com/python/cpython/issues/58538
[4]: https://github.com/python/cpython/issues/59689
[5]: https://github.com/python/cpython/commit/7e6c2e2cc49fa109662d3f04f4c3553596d31937
[6]: https://github.com/python/cpython/commit/9731330d6f4d63d6d57c8e99c8d11ef1def42858
[7]: https://gitlab.vahanus.net/ptxdist/ptxdist/-/commit/638a024500c214c1d8283bce8cec864fb95deacf
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
cmake options were renamed by
https://github.com/Kistler-Group/sdbus-cpp/commit/0074c79e7fd7983dda3c2a4e4ac7febe67751a28
resulting in the following host build failure since bump to version
2.0.0 in commit 0f5bb364c6:
/home/buildroot/autobuild/run/instance-1/output-1/build/host-sdbus-cpp-2.0.0/src/Proxy.cpp: In member function 'virtual sdbus::PendingAsyncCall sdbus::internal::Proxy::callMethodAsync(const sdbus::MethodCall&, sdbus::async_reply_handler, uint64_t)':
/home/buildroot/autobuild/run/instance-1/output-1/build/host-sdbus-cpp-2.0.0/src/Proxy.cpp:125:91: sorry, unimplemented: non-trivial designated initializers not supported
, .floating = false });
^
/home/buildroot/autobuild/run/instance-1/output-1/build/host-sdbus-cpp-2.0.0/src/Proxy.cpp:133:60: error: class template argument deduction failed:
auto asyncCallInfoWeakPtr = std::weak_ptr{asyncCallInfo};
^
Fixes: 0f5bb364c6
- http://autobuild.buildroot.org/results/66668261d05203575658a243e02e78cf77018d8c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump to version 4.6.1 and drop the linking without v3 patch as this
version integrates the fix for that
Signed-off-by: Jesse Van Gavere <jesseevg@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Although the kernel interface has not changed, it is convenient to
have the batctl match the batman-adv version. So, bump the package
to match 01ec4a39f5 batman-adv bump.
Signed-off-by: Charles Hardin <ckhardin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The current tagged version is more than 6 years old, and no new tags
have been made upstream, so let's update to the latest git version.
The current version contains many fixes and improvements and supports
several new types of USB gadgets.
The patch was a backport from upstream, so it can be dropped.
Also, upstream has changed from https://github.com/libusbgx/libusbgx
to https://github.com/linux-usb-gadgets/libusbgx: the former is a
redirect to the latter.
Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
host-autoconf-archive was added to libgpiod in commit
8df6ae3127 because of a patch to
configure.ac.
It is not needed by libgpiod2 as there is no patch since the addition
of the package in commit 57391fad2e
Fixes: 57391fad2e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- With uClibc-ng-1.0.48 we can restore this defconfig because uClibc-ng
now provides the fix for SPARC.
- The instructions in board/qemu/sparc-ss10/readme.txt are still valid
without any corrections. The system boots properly ang the login
prompt appears.
Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix following uclibc build failure raised since bump to version 4.3 in
commit 99e9ff08d0 and
https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/commit/?id=577fd10486d8d1472a6b559066f344ac30a3a391:
Create.c: In function 'write_zeroes_fork':
Create.c:155:35: error: 'FALLOC_FL_ZERO_RANGE' undeclared (first use in this function)
155 | if (fallocate(fd, FALLOC_FL_ZERO_RANGE | FALLOC_FL_KEEP_SIZE,
| ^~~~~~~~~~~~~~~~~~~~
as well as the following musl build failure:
util.c: In function 'get_md_name':
util.c:1031:29: error: 'NAME_MAX' undeclared (first use in this function); did you mean 'MD_NAME_MAX'?
1031 | static char devname[NAME_MAX];
| ^~~~~~~~
| MD_NAME_MAX
util.c:1031:29: note: each undeclared identifier is reported only once for each function it appears in
/home/buildroot/instance-0/output-1/host/bin/x86_64-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -DNO_LIBUDEV -DSendmail=\""/usr/sbin/sendmail -t"\" -DCONFFILE=\"/etc/mdadm.conf\" -DCONFFILE2=\"/etc/mdadm/mdadm.conf\" -DMAP_DIR=\"/run/mdadm\" -DMAP_FILE=\"map\" -DMDMON_DIR=\"/run/mdadm\" -DFAILED_SLOTS_DIR=\"/run/mdadm/failed-slots\" -DNO_COROSYNC -DNO_DLM -DUSE_PTHREADS -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DBINDIR=\"/sbin\" -o Monitor.o -c Monitor.c
/home/buildroot/instance-0/output-1/host/bin/x86_64-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -DNO_LIBUDEV -DSendmail=\""/usr/sbin/sendmail -t"\" -DCONFFILE=\"/etc/mdadm.conf\" -DCONFFILE2=\"/etc/mdadm/mdadm.conf\" -DMAP_DIR=\"/run/mdadm\" -DMAP_FILE=\"map\" -DMDMON_DIR=\"/run/mdadm\" -DFAILED_SLOTS_DIR=\"/run/mdadm/failed-slots\" -DNO_COROSYNC -DNO_DLM -DUSE_PTHREADS -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DBINDIR=\"/sbin\" -o dlink.o -c dlink.c
Create.c: In function 'write_zeroes_fork':
Create.c:155:35: error: 'FALLOC_FL_ZERO_RANGE' undeclared (first use in this function)
155 | if (fallocate(fd, FALLOC_FL_ZERO_RANGE | FALLOC_FL_KEEP_SIZE,
| ^~~~~~~~~~~~~~~~~~~~
Fixes: 99e9ff08d0
- http://autobuild.buildroot.org/results/0e04bcdb591ca5642053e1f7e31384f06581e989
- http://autobuild.buildroot.org/results/c77ee2615e9d473e93d95c778648c7e897b7f234
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
openocd is not compatible with libgpiod2 resulting in the following
build failure since the addition of libgpiod2 in commit
57391fad2e:
src/jtag/drivers/linuxgpiod.c: In function 'helper_get_line':
src/jtag/drivers/linuxgpiod.c:283:19: error: 'GPIOD_LINE_REQUEST_DIRECTION_INPUT' undeclared (first use in this function); did you mean 'GPIOD_LINE_DIRECTION_INPUT'?
283 | int dir = GPIOD_LINE_REQUEST_DIRECTION_INPUT, flags = 0, val = 0, retval;
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| GPIOD_LINE_DIRECTION_INPUT
Fixes: 57391fad2e
- http://autobuild.buildroot.org/results/7195e8b76350f26ab3b963702d88b254512e6928
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following static build failure raised since bump to version
version 6.0.14 in commit ce17f93e82 and
https://github.com/OISF/suricata/commit/31ba4fd1522dd0d7f933767b9205c67a4e726fe5:
configure:22378: checking for pcap_open_dead in -lpcap
configure:22407: /home/buildroot/autobuild/run/instance-3/output-1/host/bin/x86_64-linux-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -static -std=c11 -march=native -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static -rdynamic conftest.c -lpcap -ljansson -lpthread -lyaml -lpcre -latomic -lz >&5
/home/buildroot/autobuild/run/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-buildroot-linux-musl/12.3.0/../../../../x86_64-buildroot-linux-musl/bin/ld: /home/buildroot/autobuild/run/instance-3/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/lib/../lib64/libpcap.a(pcap-linux.o): in function `nl80211_init':
pcap-linux.c:(.text+0xc34): undefined reference to `nl_socket_alloc'
[...]
checking for pcap_open_dead in -lpcap... no
Fixes: ce17f93e82
- http://autobuild.buildroot.org/results/9e25c2508bd4100d2d1d3180e79060d762361213
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Many of Intel based tablets (and all phones that were designed with
Intel SoCs) have Intel AtomISP v2 engine. Add an entry for recently
added firmwares for them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With this patch series we again allow building a Buildroot toolchain
for SPARC, because SPARC was fixed in uClibc-ng, so SPARC systems
work fine now.
Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that the TestPerlDBDmysql can be run normally, a new runtime issue
appear due to switch from oracle-mysql to MariaDB:
# perl -MDBI -e '1'
# echo $?
0
# perl -MDBD::mysql -e '1'
Can't load '/usr/lib/perl5/site_perl/5.38.2/arm-linux/auto/DBD/mysql/mysql.so'
for module DBD::mysql: /usr/lib/perl5/site_perl/5.38.2/arm-linux/auto/DBD/mysql/mysql.so:
undefined symbol: net_buffer_length at /usr/lib/perl5/5.38.2/arm-linux/DynaLoader.pm line 206.
This is fixed by an upstream commit [1] from 4.046_01 release.
[1] https://github.com/perl5-dbi/DBD-mysql/commit/0f0cebe87fab335873fd3701bc304922da826940
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6735654506
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The CPIO filesystem generated by TestPerlDBDmysql is too large, and
doesn't fit as an initramfs in the 256MB of RAM available in the
versatilepb machine. This causes a failure while running a basic
test "perl -MDBI -e '1'" since "/usr/lib/perl5", and many files
being missing from the root filesystem, ultimately causing the test
to fail.
Can't locate DBI.pm in @INC (you may need to install the DBI module)
(@INC entries checked: /usr/lib/perl5/site_perl/5.38.2/arm-linux
/usr/lib/perl5/site_perl/5.38.2 /usr/lib/perl5/5.38.2/arm-linux
/usr/lib/perl5/5.38.2).
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6735654506
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add myself to the DEVELOPERS files to help review patches related to
TI's reference boards.
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to the latest kernel to pull in the latest bug fixes and features
for TI's SoCs and reference boards
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to the latest kernel to pull in the latest bug fixes and features
for TI's SoCs and reference boards
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the TFA firmware to the latest LTS tag for v2.10 release of
arm-trusted-firmware
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the TFA firmware to the latest LTS tag for v2.10 release of
arm-trusted-firmware
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The 09.02.00.009 release of ti-linux-firmware has the latest updates to
TI's TIFS, DM and DMSC firmware needed for the K3 generation of
processors. Update to pull in these latest updates.
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Tested-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The ti-k3-r5-loader is just U-Boot with a different defconfig compiled
for the 32b MCU cores needed for TI's K3 generation of SoCs. Update to
match the U-Boot version
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
PIE will be set by buildroot if the user wants it so set
{COMPILE,LINK}_PIE to an empty value to fix the following build failure
raised since the addition of the package in commit
02c818bc5c:
/home/buildroot/autobuild/run/instance-3/output-1/host/bin/m68k-linux-gcc -W -Wall -Waggregate-return -Wcast-align -Wconversion -Wdisabled-optimization -Wmissing-declarations -Wmissing-format-attribute -Wmissing-noreturn -Wmissing-prototypes -Wpointer-arith -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -std=gnu99 -DLIBEXECDIR=\"/usr/lib\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wl,-z,relro -Wl,-stats -fPIE -pie -Wl,-z,now utempter.c -o utempter
[...]
/home/buildroot/autobuild/run/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/m68k-buildroot-linux-uclibc/12.3.0/../../../../m68k-buildroot-linux-uclibc/bin/ld: /home/buildroot/autobuild/run/instance-3/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/Scrt1.o: in function `lib_main':
(.text+0x4): undefined reference to `__shared_flat_add_library'
Fixes: 02c818bc5c
- http://autobuild.buildroot.org/results/3a5581fd4edf56bbdc48ab111a2351fc70f1c703
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds basic support for the new OrangePi Zero2W board:
- http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-2W.html
Brief summary of the board features:
- H618 Allwinner SoC
- Quad-Core ARM Cortex-A53 Processor 1.5GHz
- Mali G31 MP2 GPU
- LPDDR4: 1GB/2GB/4GB
- Wi-Fi5.0+BT 5.0
- 2x Type-C USB 2.0
- 1x Mini HDMI
- Wi-Fi 5.0 + BT 5.0
- 40-pin expansion interface (GPIO / UART / I2C / SPI / PWM)
- 24-pin expansion interface (2x USB 2.0 / ETH / IR / audio)
BSP includes the following components:
- mainline ATF v2.10
- mainline U-Boot v2024.04
- mainline Linux kernel v6.8
No custom scripts required: all is covered by common orangepi scripts.
However new option BR2_DOWNLOAD_FORCE_CHECK_HASHES requires checksums
for all the BSP components. They are added as board specific patches.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
And enable BR2_DOWNLOAD_FORCE_CHECK_HASHES.
Generated by utils/add-custom-hashes, with the (redundant)
linux-headers.hash replaced by a symlink.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following error/warnings with kconfig from linux-6.9-rc5:
package/x11r7/Config.in:14: syntax error
package/x11r7/Config.in:14:warning: ignoring unsupported character '/'
package/x11r7/Config.in:14:warning: ignoring unsupported character '/'
package/x11r7/Config.in:14:warning: ignoring unsupported character '/'
package/x11r7/Config.in:14:warning: ignoring unsupported character '.'
package/x11r7/Config.in:14: invalid statement
[...]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following error/warnings with kconfig from linux-6.9-rc5:
package/python-pydal/Config.in:2: syntax error
package/python-pydal/Config.in:2: invalid statement
package/python-pydal/Config.in:3: invalid statement
[...]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following error/warnings with kconfig from linux-6.9-rc5:
package/dovecot/Config.in:36: syntax error
package/dovecot/Config.in:36:warning: ignoring unsupported character '/'
package/dovecot/Config.in:36:warning: ignoring unsupported character '/'
package/dovecot/Config.in:36:warning: ignoring unsupported character '.'
package/dovecot/Config.in:36: invalid statement
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following error/warnings with kconfig from linux-6.9-rc5:
package/cmocka/Config.in:2: syntax error
package/cmocka/Config.in:2: invalid statement
package/cmocka/Config.in:3: invalid statement
package/cmocka/Config.in:4: invalid statement
[...]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following error/warnings with kconfig from linux-6.9-rc5:
boot/barebox/Config.in:79: syntax error
boot/barebox/Config.in:79:warning: ignoring unsupported character '/'
boot/barebox/Config.in:79:warning: ignoring unsupported character '/'
boot/barebox/Config.in:79:warning: ignoring unsupported character '/'
boot/barebox/Config.in:79:warning: ignoring unsupported character '.'
boot/barebox/Config.in:79: invalid statement
boot/barebox/Config.in:93: syntax error
boot/barebox/Config.in:93:warning: ignoring unsupported character '/'
boot/barebox/Config.in:93:warning: ignoring unsupported character '/'
boot/barebox/Config.in:93:warning: ignoring unsupported character '/'
boot/barebox/Config.in:93:warning: ignoring unsupported character '.'
boot/barebox/Config.in:93: invalid statement
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Arnout noticed during the review that uboot.hash was missing from
BR2_GLOBAL_PATCH_DIR.
"The hash for 2024.01 is currently in boot/uboot/uboot.hash, but as soon as we
update the U-Boot version, it will no longer be. So to be future safe, we should
add a local override of the uboot hash file as well (which is simply identical
to uboot.hash)."
This is required since BR2_DOWNLOAD_FORCE_CHECK_HASHES is now enabled.
[1] http://lists.busybox.net/pipermail/buildroot/2024-April/689283.html
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As suggested by Arnout during the review [1], we can assume that U-Boot
needs ti-k3-boot-firmware when it is selected (likely by
ti-k3-r5-loader).
We can remove BR2_TARGET_UBOOT_NEEDS_TI_K3_BOOT_FIRMWARE without
legacy handling since this option is not part of any Buildroot
release.
[1] http://lists.busybox.net/pipermail/buildroot/2024-April/689263.html
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following uclibc-ng build failure raised since bump to version
0.17.07 in commit 6fb179b906 and
https://github.com/ColinIanKing/stress-ng/commit/2ad8aff9bc1ab822cf615c72712c6031a8f60bbd:
stress-sock.c: In function 'stress_sock_client':
stress-sock.c:656:35: error: 'SO_ZEROCOPY' undeclared (first use in this function); did you mean 'MSG_ZEROCOPY'?
656 | if (setsockopt(fd, SOL_SOCKET, SO_ZEROCOPY, &so_zerocopy, sizeof(so_zerocopy)) == 0) {
| ^~~~~~~~~~~
| MSG_ZEROCOPY
stress-sock.c:656:35: note: each undeclared identifier is reported only once for each function it appears in
CC stress-sockfd.c
stress-sock.c: In function 'stress_sock_server':
stress-sock.c:1060:34: error: 'SO_ZEROCOPY' undeclared (first use in this function); did you mean 'MSG_ZEROCOPY'?
1060 | if (setsockopt(fd, SOL_SOCKET, SO_ZEROCOPY, &so_zerocopy, sizeof(so_zerocopy)) == 0) {
| ^~~~~~~~~~~
| MSG_ZEROCOPY
Fixes: 6fb179b906
- http://autobuild.buildroot.org/results/bcff31bd9820cf0b95f8d8c6de44fd4ab8e2f065
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: reference upstream commit now it's merged]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
With the bump to version 8.1.1, the patch that disabled the compilation
of the fp-bench test is no longer applicable, even though the package
compilation process does not report any errors in applying the patch
itself. The new patch does not disable the test by default but only if
the file fenv.h is not missing, with the hope that this approach will be
considered acceptable by the maintainer and merged upstream.
The patch is an adaptation of the one sent upstream.
Link: https://lists.nongnu.org/archive/html/qemu-devel/2021-03/msg00492.html
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As asked by Romain. Armadeus boards share same Linux hashes.
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
[yann.morin.1998@free.fr: fix check-package]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
And enable BR2_DOWNLOAD_FORCE_CHECK_HASHES. As asked By Romain.
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
[yann.morin.1998@free.fr: fix check-package]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Release notes:
ttps://github.com/ebiggers/libdeflate/blob/master/NEWS.md
Build-tested using this defconfig
BR2_PACKAGE_LIBDEFLATE=y
arm-aarch64 [ 1/42]: OK
bootlin-aarch64-glibc [ 2/42]: OK
bootlin-arcle-hs38-uclibc [ 3/42]: OK
bootlin-armv5-uclibc [ 4/42]: OK
bootlin-armv7-glibc [ 5/42]: OK
bootlin-armv7m-uclibc [ 6/42]: OK
bootlin-armv7-musl [ 7/42]: OK
bootlin-m68k-5208-uclibc [ 8/42]: OK
bootlin-m68k-68040-uclibc [ 9/42]: OK
bootlin-microblazeel-uclibc [10/42]: OK
bootlin-mipsel32r6-glibc [11/42]: OK
bootlin-mipsel-uclibc [12/42]: OK
bootlin-nios2-glibc [13/42]: OK
bootlin-openrisc-uclibc [14/42]: OK
bootlin-powerpc64le-power8-glibc [15/42]: OK
bootlin-powerpc-e500mc-uclibc [16/42]: OK
bootlin-riscv32-glibc [17/42]: OK
bootlin-riscv64-glibc [18/42]: OK
bootlin-riscv64-musl [19/42]: OK
bootlin-s390x-z13-glibc [20/42]: OK
bootlin-sh4-uclibc [21/42]: OK
bootlin-sparc64-glibc [22/42]: OK
bootlin-sparc-uclibc [23/42]: OK
bootlin-x86-64-glibc [24/42]: OK
bootlin-x86-64-musl [25/42]: OK
bootlin-x86-64-uclibc [26/42]: OK
bootlin-xtensa-uclibc [27/42]: OK
br-arm-basic [28/42]: OK
br-arm-full-nothread [29/42]: OK
br-arm-full-static [30/42]: OK
br-i386-pentium4-full [31/42]: OK
br-i386-pentium-mmx-musl [32/42]: OK
br-mips64-n64-full [33/42]: OK
br-mips64r6-el-hf-glibc [34/42]: OK
br-powerpc-603e-basic-cpp [35/42]: OK
br-powerpc64-power7-glibc [36/42]: OK
linaro-aarch64-be [37/42]: OK
linaro-aarch64 [38/42]: OK
linaro-arm [39/42]: OK
sourcery-mips64 [40/42]: OK
sourcery-mips [41/42]: OK
sourcery-nios2 [42/42]: OK
42 builds, 0 skipped, 0 build failed, 0 legal-info failed, 0 show-info failed
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Package was disabled with commit
8035ea0a71 because of missing features
in uClibc-ng. In uClibc-ng 1.0.47 the missing feature were added,
so enable shadow again.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is duplicated from the U-Boot makefile & Kconfig.
Similarly to U-Boot custom boards sometimes need to adjust the U-Boot
devicetree. For example, the AM64x SDRAM controller supports inline ECC
which needs to be enabled in the R5 loader devicetree.
Please note that some versions of U-Boot have broken external devicetree
support and may require manual patching to build. See commit [1]
in the U-Boot tree.
[1] https://source.denx.de/u-boot/u-boot/-/commit/3609e1dc5f4d4c238dcd23e045ba6223310feffa
Signed-off-by: Patrick Oppenlander <patrick.oppenlander@gmail.com>
Signed-off-by: Gero Schwäricke <gero.schwaericke@grandcentrix.net>
[Romain: add gitlab URL]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Fix the following build failure raised since bump of glibc to version
2.39 in commit b5680f53d6:
checking for crypt in -lcrypt... no
configure: error: in `/home/arbab/src/buildroot/output/build/petitboot-1.15':
configure: error: shadow/crypt libs required
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit bumps to the 6.6.x series to refresh the test, as the
4.19.x series is planned to be end-of-life soon, in December 2024.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Sebastian email address at Smile is bouncing, so drop it
from the DEVELOPERS file.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The patch doesn't introduce any functional changes but reorganizes the
code to prevent the execution of the commands:
make ti_am62x_sk_defconfig
make savedefconfig
from showing a change in the defconfig.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Gero Schwäricke <gero.schwaericke@grandcentrix.net>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The http URL redirects to https. This commit updates this URL to
directly use https.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that binutils patch has been backported to every Buildroot binutils
version we can drop nios2 binutils bug 27597 dependency.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Now that binutils patch has been backported to every Buildroot binutils
version we can drop nios2 binutils bug 27597 dependency.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Now that binutils patch has been backported to every Buildroot binutils
version we can drop nios2 binutils bug 27597 dependency.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
This toolchain is pretty old and unlikely used. It's also affected by
binutils bug 27597, so let's remove it.
Remove BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII from pixman package.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Romain: remove BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The Sourcery CodeBench Nios-II 2018.05 external toolchain will be
removed, first remove it from toolchain-configs.csv used by test-pkg
and genrandconfig scripts.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Now that we do have support for checking hashes for custom versions
(for the few packages for which we do support custom versions, like the
kernel, some bootloaders...), we want to ensure that our defconfig
files, when they enable one or more such custom version, do enable
checking the hashes for those versions, and thus we want to require all
our defconfigs do enable BR2_DOWNLOAD_FORCE_CHECK_HASHES.
Add a check for that condition.
We need to be careful that we only check Buildroot's defconfig, whether
in-tree or in a br2-external, and not kernel or other kconfig-based
defconfig files, like those in board/ sub-directories. So we only match
defconfig files that are in a configs/ directory, whether at the
toplevel (for in-tree defconfigs), or not (for br2-external defconfigs).
Since we only have two defconfigs that check hashes for custom versions,
regnerate .checkpackageignore to ignore all so-far broken defconfigs.
Suggested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Wireless regulatory database lists the allowed radio frequencies for
each local jurisdiction. Since linux-4.15 the kernel supports loading
the files regulatory.db/regulatory.db.p7s directly from the
/lib/firmware directory. Currently this package is not enabled and
kernel complains with the following message on every boot:
"""
platform regulatory.0: Direct firmware load for regulatory.db failed
with error -2
cfg80211: failed to load regulatory.db
"""
Add wireless regulatory database package to fix the issue.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a new defconfig for the Star64 board made by
Pine64. This board is based on the Starfive JH7110 RISC-V 64 bits
SoC. See: https://wiki.pine64.org/wiki/STAR64.
This patch uses a custom Kernel and U-Boot made for this board. The
SPL has to be signed with the Starfive SPL-Tool which is a software
provided by the vendor to get the necessary headers on the SPL.
The image configuration is based on the work done by Ivan Velickovic
<i.velickovic@unsw.edu.au>.
Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a new package for the Starfive SPL tool. It is used to
add a header to the Secondary Program Loader for platforms based on
the Starfive JH7110 SoC.
Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We unconditionally configure asterisk with --with-crypt, so the build
currently fails under glibc since it removed crypt in 2.39, and we
explicitly remove it from external toolchains as well, whatever the
version, causing build failures such as:
checking for mandatory modules: OPENSSL BKTR CRYPT ILBC JANSSON LIBEDIT LIBJWT LIBXML2 PJPROJECT SQLITE3 ZLIB... fail
configure: ***
configure: *** The CRYPT installation appears to be missing or broken.
configure: *** Either correct the installation, or run configure
configure: *** including --without-crypt.
Fixing this could be done in two ways: either make libxcrypt a mandatory
dependency under glibc, and continue unconditionally enabling crypt
support, or only enable crypt support when libxcrypt is available or
this was a non-glibc toolchain.
We chose the first option, to keep the existing behaviour (crypt support
is always enabled), to be aligned with other packages (libxcrypt is
selected under glibc toolchains), and because it is also the simplest.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since the switch to binutils 2.41 as default version [1], the arm Linux
kernel build is broken with:
arch/arm/mm/proc-v7.S: Assembler messages:
arch/arm/mm/proc-v7.S:640: Error: junk at end of line, first unrecognized character is `#'
A similar issue has already be fixed for qemu m68k [2].
Bump to the latest kernel 5.10 that already include the backport
of 790756c7e022 ("ARM: 8933/1: replace Sun/Solaris style flag on section directive")
Select BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y to fix the following
build error:
scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
#include <openssl/bio.h>
[1] e88225ed88
[2] a1ce9474e4
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/6655119386
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
[Romain:
- improve commit log
- Select BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL
]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Since the switch to binutils 2.41 as default version [1], the arm Linux
kernel build is broken with:
arch/arm/mm/proc-v7.S: Assembler messages:
arch/arm/mm/proc-v7.S:640: Error: junk at end of line, first unrecognized character is `#'
A similar issue has already be fixed for qemu m68k [2].
Bump to the latest kernel 5.10 that already include the backport
of 790756c7e022 ("ARM: 8933/1: replace Sun/Solaris style flag on section directive")
Select BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y to fix the following
build error:
scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
#include <openssl/bio.h>
[1] e88225ed88
[2] a1ce9474e4
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/6655119389
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
[Romain:
- improve commit log
- Select BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL
]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Since the switch to binutils 2.41 as default version [1], the arm Linux
kernel build is broken with:
arch/arm/mm/proc-v7.S: Assembler messages:
arch/arm/mm/proc-v7.S:640: Error: junk at end of line, first unrecognized character is `#'
A similar issue has already be fixed for qemu m68k [2].
Bump to the latest kernel 5.10 that already include the backport
of 790756c7e022 ("ARM: 8933/1: replace Sun/Solaris style flag on section directive")
Select BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y to fix the following
build error:
scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
#include <openssl/bio.h>
[1] e88225ed88
[2] a1ce9474e4
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/6655119384
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
[Romain:
- improve commit log
- Select BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL
]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
When glibc was bumped to version 2.39 in commit
b5680f53d6 it removed the deprecated
libcrypt support.
As glibc's libcrypt was providing sshd's libcrypt dependency this broke
the sshd password authentification at runtime using glibc version 2.39.
# sshpass -p testpwd ssh -oStrictHostKeyChecking=no localhost /bin/true
Permission denied, please try again.
Without libcrypt, OpenSSH >= 6.2 fall back to using openssl's DES_crypt
function on platorms that don't have a native crypt() function [1].
Note that DES_crypt is deprecated since openssl 3.0 [2] [3].
"Use of the low level DES functions has been informally discouraged for a
long time. We now formally deprecate them.
Applications should instead use the EVP APIs, e.g. EVP_EncryptInit_ex,
EVP_EncryptUpdate, EVP_EncryptFinal_ex, and the equivalently named decrypt
functions."
Also DES_crypt is provided by openssl only if
BR2_PACKAGE_LIBOPENSSL_ENABLE_DES is enabled. Otherwise crypt() is
never defined:
sd-compat.a(xcrypt.o): in function `xcrypt':
xcrypt.c:(.text+0x48): undefined reference to `crypt'
It's not clear why the password authentification fail with openssl's
DES_crypt but since it's deprecated we use libxcrypt to provide
a working crypt() function for glibc based toolchains.
[1] https://github.com/openssh/openssh-portable/blob/V_9_7/openbsd-compat/xcrypt.c#L57
[2] https://github.com/openssl/openssl/commit/c6fec81b88131d08c1022504ccf6effa95497afb
[3] https://www.openssl.org/docs/man3.2/man3/DES_crypt.html
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6623402147
Signed-off-by: Romain Naour <romain.naour@smile.fr>
When glibc was bumped to version 2.39 in commit
b5680f53d6 it removed the deprecated
libcrypt support.
But compiler-rt package still use crypt.h header and crypt() function
in the sanitizer code.
Use libxcrypt unconditionally since compiler-rt itself already depends
on glibc based toolchain.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6703222513
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Since the toolchain Bootlin update to 2023.11-1 [1], the arm Linux
kernel build is broken with binutils >= 2.41 with:
arch/arm/mm/proc-v7.S: Assembler messages:
arch/arm/mm/proc-v7.S:640: Error: junk at end of line, first unrecognized character is `#'
A similar issue has already be fixed for qemu m68k [2].
Bump to the latest kernel 4.19 that already include the backport
of 790756c7e022 ("ARM: 8933/1: replace Sun/Solaris style flag on section directive")
[1] 7e0e6e3b86
[2] a1ce9474e4
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6703222383
Signed-off-by: Romain Naour <romain.naour@smile.fr>
GCC14 now treats implicit int types as error so when check() from
check-lxdialog.sh is called to check whether we can link against ncurses
it will fail silently and the help text indicating to install ncurses is
printed.
However, this is not due to missing ncurses but once the stderr redirect
to /dev/null is removed we can see the root cause:
<stdin>:2:1: error: return type defaults to ‘int’ [-Wimplicit-int]
So, in order for menuconfig to work with GCC14 lets just specify the
return type of main() as int.
Npte that the upstream kconfig in the linux kernel source tree no longer
carries or uses the check-lxdialog.sh script since commit 1c5af5cf9308
(kconfig: refactor ncurses package checks for building mconf and nconf),
so there is no commit we can backport to our kconfig copy.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Tested-by: Petr Vorel <petr.vorel@gmail.com>
[yann.morin.1998@free.fr: add note about upstream kernel]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The 6.7.x series is now EOL upstream, so drop the linux-headers option
and add legacy handling for it.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Remove ac_cv_prog_cc_c99; axel has been updated to autoconf 2.72, whose C99
test is compatible with BR2_USE_WCHAR=n.
Signed-off-by: Ismael Luceno <ismael@iodev.co.uk>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Fixes the following security issues:
CVE-2021-3575: A heap-based buffer overflow was found in openjpeg in
color.c:379:42 in sycc420_to_rgb when decompressing a crafted .j2k file. An
attacker could use this to execute arbitrary code with the permissions of
the application compiled against openjpeg.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In _imagingcms.c in Pillow before 10.3.0, a buffer overflow exists because
strcpy is used instead of strncpy.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Note that, although not explicitly specified in the changelog, version
3.7 renamed the file COPYING to LICENSE, requiring corresponding changes
in Bildroot related to the license file (specifically, the name and hash).
Release notes:
- bmap-tools 3.7:
* Use GitHub Actions for CI (#109)
* Add `poetry` for dependency management and `black` for code
formatting (#104)
* Add functionality for copying from standard input (#99)
* Switch from gpg to gpgme module (#103)
- bmaptool 3.8.0:
* use 'df -P' for POSIX portable output
* bmaptool has new maintainers
* bmaptool has a new home
* bmaptool is now only called 'bmaptool' and not one of a dozen such
variations
* switch to use an X.Y.Z versioning number scheme
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Notable changes:
- The web terminal is readonly by default now, to make it writable, use
-W option.
Also set TTYD_CPE_ID_VALID.
cpe:2.3:a:ttyd_project:ttyd is a valid CPE identifier for this package:
https://nvd.nist.gov/products/cpe/detail/DBEDA75E-4E19-48C1-92D7-43E4035BC048
Signed-off-by: TIAN Yuanhao <tianyuanhao3@163.com>
[yann.morin.1998@free.fr: move CPE_ID_VALID to its own commit]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Also a runtime testcase is added.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr:
- fix check-package
- small codign style in test sample
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
/dev/shm is a world-writable directory, like /tmp, and should also
have the sticky bit set. Without this, any user can delete and
replace another user's files in /dev/shm.
This bug has been present since /dev/shm was added to the skeleton
/etc/fstab, but appears to have been fixed for systems using systemd
by commit 76fc9275f1 "system: separate sysv and systemd parts of the
skeleton" which went into Buildroot 2017.08.
Signed-off-by: Ben Hutchings <ben.hutchings@mind.be>
Fixes: 22fde22e35
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
TestATFVexpress is using vexpress_aemv8a_juno as as u-boot defconfig
but the Buildroot defconfig of this board was removed in 2022.11 [1]
Since both TestATFVexpress and TestATFAllwinner are now using mainline
ATF, we don't really need several ATF test anymore. Initially [2],
several runtime test were added to test ATF/U-Boot combinations when
ATF was provided by a vendor: vexpress (mainline), Allwinner and
Marvell.
Keep TestATFAllwinner as ATF mainline test.
[1] 347c108738
[2] 8cf3ce04e9
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
u-boot-2021.04 seems to be broken when pylibfdt support is enabled
and the latest python3/setuptools are used.
Since the TestATFAllwinner is using bananapi_m64 as u-boot defconfig
but the Buildroot defconfig of this board was removed in 2022.11 [1]
update TestATFAllwinner to use a newer BSP. Use the one provided
by orangepi_zero_plus2_defconfig.
[1] daf3c6661f
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6477656317 (TestATFAllwinner)
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since the toolchain Bootlin update to 2023.11-1 [1], the arm Linux
kernel build is broken with binutils >= 2.41 with:
arch/arm/mm/proc-v7.S: Assembler messages:
arch/arm/mm/proc-v7.S:640: Error: junk at end of line, first unrecognized character is `#'
A similar issue has already be fixed for qemu m68k [2].
Bump to the latest kernel 4.19 that already include the backport
of 790756c7e022 ("ARM: 8933/1: replace Sun/Solaris style flag on section directive")
[1] 7e0e6e3b86
[2] a1ce9474e4
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6414160106 (TestFileCapabilities)
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The license file was updated for two reasons:
* This version now bundles ntlmclient. NTLM support is disabled by
the buildroot package.
* The bundled zlib version (that buildroot does not use) was updated and
its copyright years changed.
This version also adds support for using the SSH binary (at an hardcoded
/usr/bin/ssh path) instead of using libssh2.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
--with-xdebug is not recognized since the addition of the package in
commit 7b7dffd098:
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --disable-dependency-tracking, --enable-ipv6, --disable-nls, --with-xdebug
Fixes: 7b7dffd098
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The D1 support is now in mainline, so use that instead. There is no
dedicated nezha defconfig, so use the riscv defconfig. This defconfig has
most drivers as modules, so add mdev to ensure they get correctly loaded.
The defconfig does not have USB gadget/OTG support, so enable that using a
config fragment to make the USB-C connector work and get rid of the
following warning:
[ 7.233418] musb-sunxi 4100000.usb: Invalid or missing 'dr_mode' property
[ 7.240330] musb-sunxi: probe of 4100000.usb failed with error -22
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
zlib is an optional dependency dependency (enabled by default) since the
addition of the package in commit
8aaa7ecbce
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
When python performs a cross compile, it uses a host interpreter to run
steps on behalf of the foreign architecture to finalize the build.
When performing these steps, foreign modules may be loaded if the SOABI
matches that of the host. This can lead to issues if the modules are
linked against a libc not available on the host or if the binaries
include instructions unsupported by the host.
For now, patch the foreign libraries out of PYTHONPATH and explicitly
define the path to sysconfigdata so builds can complete without error.
This method currently passes all upstream CI pipelines [0] and should
also work (with some modifications) for the migration to 3.12 [1].
Fixes: http://autobuild.buildroot.net/results/c854080e003e9a7d525325073190b472a8f982aa/
[0]: https://github.com/python/cpython/pull/116294
[1]: https://lists.buildroot.org/pipermail/buildroot/2024-February/685369.html
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Tested-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Note: this commit only deals with glibc and its internal libcrypt (or
lack thereof); other C libraries, musl and uClibc-NG, are not considered.
libcrypt from glibc has been deprecated for a long time, and it has now
been entirely dropped with glibc 2.39. Now, packages that need crypt(3)
features need to explicitly depend on the libxcrypt pacakge.
However, the set of files installed both by glibc and libxcrypt is not
empty:
glibc libxcrypt
/usr/include/crypt.h /usr/include/crypt.h
/usr/lib/libcrypt.a /usr/lib/libcrypt.a
/usr/lib/libcrypt.so /usr/lib/libcrypt.so
/lib/libcrypt.so.1
/lib/libcrypt-2.23.so
/usr/lib/libcrypt.so.2
The two libraries have different SO_NAME, so they do not conflict on the
library filename. However, the .so synlink is present in both, and thus
conflicts. The header and the static library also conflict.
So, the situation is that, with a glibc 2.39 or later, packages have to
use libxcrypt, which is a drop-in replacement. With glibc 2.38 or
earlier, they can use either.
Since we already bumped to glibc 2.39 for the internal toolchain, we
have already converted quite a few packages to use libxcrypt. That works
well with an internl toolchain, because glibc does not install the
conflicting files.
However, for external toolchains, we may very well end up in three
situations:
- a glibc 2.39 or later, without libcrypt
- a glibc 2.39 or later, without libcrypt, but with libxcrypt [0]
- a glibc 2.38 or earlier with libcrypt
In the first case, all is OK and we are in a situation similar to the
internal toolchain, but in the latter two cases, we end up with a
conflict.
We could introduce BR2_TOOLCHAIN_EXTERNAL_HAS_LIBCRYPT os something
along those lines, but this is going to be a bit complex on packages,
which would have to select LIBXCRYPT if GLIBC && !_HAS_LIBCRYPT.
So, to simplify things, we want to get the external toolchains into a
situation similar to the internal one, where libcrypt is not provided by
the toolchain; packages have to select libxcrypt for glibc toolchains,
without having to care whether this is an internal or external toolchain
or some more complex conditions.
So, we remove from staging whatever could be used to compile and link
with libcrypt. We however keep the SO_NAME file, if it exists, and we
also install it in target/, for those pre-built binaries that may be
linked with it [1]. The glibc SO_NAME has always been libcrypt.so.1, so
this is what we copy exactly, to avoid copying the libxcrypt one, which
is libcrypt.so.2.
[0] that could happen if a toolchain provider tried to be helpful and
suplies a toolchain with libxcrypt to be trasnparent to users, in which
case that would conflict with ours...
[1] if such a prebuilt binary (executable or library) is used with a
glibc 2.39 or later toolchain, it will obviously not work at all.
libxcrypt is supposed to be a drop-in replacement for glibc's libcrypt,
so we could look into symlinking libcrypt.so.1 to libcrypt.so.2. In a
later patch, maybe...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since all AM62 and AM64 defconfig has been updated to use binman
and ti-k3-image-gen has been removed, binman is now mandatory
for all TI K3 SoC. So remove BR2_TARGET_TI_K3_R5_LOADER_USE_BINMAN
option since since it can't be disabled anymore.
We can remove BR2_TARGET_TI_K3_R5_LOADER_USE_BINMAN without
legacy handling since this option is not part of any Buildroot
release.
While at it, add one more like to binman dependencies in comments.
Reviewed-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Previoulsy (without binman), when a TI K3 SoC using Combined binary
with a split firmware boot method was used (am62ax or am62x) [1], the
user had to select BR2_TARGET_UBOOT_NEEDS_TI_K3_DM in the defconfig
to provide Device Manager firmware provided by ti-k3-boot-firmware.
With binman, this option is no longer necessary since
ti-k3-boot-firmware package is already in the u-boot dependency and the
path to DM and SYSFW binaries are provided by BINMAN_INDIRS.
We are going to remove ti-k3-image-gen, so binman is now mandatory on
all TI K3 SoCs.
[1] https://gitlab.com/buildroot.org/buildroot/-/commit/52ce606c05ee3ac869f8087292bc3dbb0d25b79b
Reviewed-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The 2024.01 version of U-Boot for the am64x-sk board has introduced two
major changes:
- The device tree k3-am642-sk.dtb is no longer searched in /boot, but in
/boot/dtb/ti. Hence, the disabling of BR2_LINUX_KERNEL_INSTALL_TARGET
and the use of extlinux.conf for the proper loading of the device tree.
Furthermore, the parameter BR2_ROOTFS_POST_SCRIPT_ARGS was used to
auto-generate the extlinux.conf file so that developers can change the
kernel loading options by modifying the .config.
- U-Boot is capable of building tiboot3.bin using Binman. So it's no longer
necessary to use custom tools like ti-k3-image-gen.
- Use a custom tiboot3.bin since the default is "hs-fs",
but the ti_am64x_sk_defconfig expect the "gp" one.
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Tested-by: Michael Trimarchi <michael@amarulasolutions.com>
Tested-by: Andreas Dannenberg <dannenberg@ti.com>
Tested-by: Gero Schwäricke <gero.schwaericke@grandcentrix.net>
Tested-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Removing any explicit reference to the ti_am62x_sk_defconfig
configuration, the script can also be used by other configurations or at
least by ti_am64x_sk_defconfig.
Reviewed-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The 2024.01 version of U-Boot for the am62x-sk board has introduced two
major changes:
- The device tree k3-am625-sk.dtb is no longer searched in /boot, but in
/boot/dtb/ti. Hence, the disabling of BR2_LINUX_KERNEL_INSTALL_TARGET
and the use of extlinux.conf for the proper loading of the device tree.
Furthermore, the parameter BR2_ROOTFS_POST_SCRIPT_ARGS was used to
auto-generate the extlinux.conf file so that developers can change the
kernel loading options by modifying the .config.
- U-Boot is capable of building tiboot3.bin using Binman. So it's no longer
necessary to use custom tools like ti-k3-image-gen.
- Use a custom tiboot3.bin since the default is "hs-fs",
but the ti_am62x_sk_defconfig expect the "gp" one
Tested on SK-AM62B-P1.
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Tested-by: Michael Trimarchi <michael@amarulasolutions.com>
Tested-by: Andreas Dannenberg <dannenberg@ti.com>
Tested-by: Gero Schwäricke <gero.schwaericke@grandcentrix.net>
Tested-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
With binman support enabled, u-boot for k3 r5 core (ti-k3-r5-loader)
install different target image (tiboot3*.bin) depending on the K3
SoC boot ROM:
- General Purpose devices (gp)
- High Security - Field Securable devices (hs-fs)
- High Security - Security Enforcing devices (hs)
An additional firmware binary is required on certain TI K3 devices such
as AM65 and J721e due to the "Split binary" boot flow [1]:
- Split binary with a combined firmware: (eg: AM65)
- Combined binary with a combined firmware: (eg: AM64)
- Split binary with a split firmware: (eg: J721E)
- Combined binary with a split firmware: (eg: AM62)
K3 SoC using Split Binary Boot Flow also requires sysfw-*.itb file
to boot (eg: am65, j721e). Only tiboot3*.bin is needed for other
boot flow.
From [1]:
"It's important to rename the generated tiboot3.bin and sysfw.itb
to match exactly tiboot3.bin and sysfw.itb as ROM and the wakeup
UBoot SPL will only look for and load the files with these names."
See the (not exhaustive) list of all tiboot3*.bin and sysfw*.itb file
variant found in meta-ti:
meta-ti-bsp/conf/machine/beaglebone-ai64-k3r5.conf:UBOOT_IMAGE = "tiboot3-${MAINMACHINE}-${PV}-${PR}.${UBOOT_SUFFIX}"
meta-ti-bsp/conf/machine/beaglebone-ai64-k3r5.conf:UBOOT_SYMLINK = "tiboot3-${MAINMACHINE}.${UBOOT_SUFFIX}"
meta-ti-bsp/conf/machine/include/am62axx.inc:IMAGE_BOOT_FILES += "tiboot3-am62ax-hs-fs-evm.bin"
meta-ti-bsp/conf/machine/include/am62axx.inc:IMAGE_BOOT_FILES += "tiboot3-am62ax-gp-evm.bin"
meta-ti-bsp/conf/machine/include/am62axx.inc:IMAGE_BOOT_FILES += "tiboot3-am62ax-hs-evm.bin"
meta-ti-bsp/conf/machine/include/am62pxx.inc:IMAGE_BOOT_FILES += "tiboot3-am62px-hs-fs-evm.bin"
meta-ti-bsp/conf/machine/include/am62xx.inc:IMAGE_BOOT_FILES += "tiboot3-am62x-hs-fs-evm.bin"
meta-ti-bsp/conf/machine/include/am62xx.inc:IMAGE_BOOT_FILES += "tiboot3-am62x-gp-evm.bin"
meta-ti-bsp/conf/machine/include/am62xx.inc:IMAGE_BOOT_FILES += "tiboot3-am62x-hs-evm.bin"
meta-ti-bsp/conf/machine/include/am64xx.inc:IMAGE_BOOT_FILES += "tiboot3-am64x_sr2-hs-fs-evm.bin"
meta-ti-bsp/conf/machine/include/am64xx.inc:IMAGE_BOOT_FILES += "tiboot3-am64x-gp-evm.bin"
meta-ti-bsp/conf/machine/include/am64xx.inc:IMAGE_BOOT_FILES += "tiboot3-am64x_sr2-hs-evm.bin"
meta-ti-bsp/conf/machine/include/am65xx.inc:IMAGE_BOOT_FILES += "tiboot3-am65x_sr2-gp-evm.bin"
meta-ti-bsp/conf/machine/include/am65xx.inc:IMAGE_BOOT_FILES += "tiboot3-am65x_sr2-hs-evm.bin"
meta-ti-bsp/conf/machine/include/j7200.inc:IMAGE_BOOT_FILES += "tiboot3-j7200-gp-evm.bin"
meta-ti-bsp/conf/machine/include/j7200.inc:IMAGE_BOOT_FILES += "tiboot3-j7200_sr2-hs-fs-evm.bin"
meta-ti-bsp/conf/machine/include/j7200.inc:IMAGE_BOOT_FILES += "tiboot3-j7200_sr2-hs-evm.bin"
meta-ti-bsp/conf/machine/include/j721e.inc:IMAGE_BOOT_FILES += "tiboot3-j721e-gp-evm.bin"
meta-ti-bsp/conf/machine/include/j721e.inc:IMAGE_BOOT_FILES += "tiboot3-j721e_sr2-hs-fs-evm.bin"
meta-ti-bsp/conf/machine/include/j721e.inc:IMAGE_BOOT_FILES += "tiboot3-j721e_sr1_1-hs-evm.bin"
meta-ti-bsp/conf/machine/include/j721s2.inc:IMAGE_BOOT_FILES += "tiboot3-j721s2-gp-evm.bin"
meta-ti-bsp/conf/machine/include/j721s2.inc:IMAGE_BOOT_FILES += "tiboot3-j721s2-hs-fs-evm.bin"
meta-ti-bsp/conf/machine/include/j722s.inc:IMAGE_BOOT_FILES += "tiboot3-j722s-hs-fs-evm.bin"
meta-ti-bsp/conf/machine/include/j784s4.inc:IMAGE_BOOT_FILES += "tiboot3-j784s4-gp-evm.bin"
meta-ti-bsp/conf/machine/include/j784s4.inc:IMAGE_BOOT_FILES += "tiboot3-j784s4-hs-fs-evm.bin"
meta-ti-bsp/conf/machine/include/k3r5.inc:SPL_BINARY = "tiboot3-${SYSFW_SOC}-${SYSFW_SUFFIX}-${SYSFW_CONFIG}.${SPL_SUFFIX}"
meta-ti-bsp/conf/machine/include/am65xx.inc:IMAGE_BOOT_FILES += "sysfw.itb"
meta-ti-bsp/conf/machine/include/am65xx.inc:IMAGE_BOOT_FILES += "sysfw-am65x_sr2-gp-evm.itb"
meta-ti-bsp/conf/machine/include/am65xx.inc:IMAGE_BOOT_FILES += "sysfw-am65x_sr2-hs-evm.itb"
meta-ti-bsp/conf/machine/include/j721e.inc:IMAGE_BOOT_FILES += "sysfw.itb"
meta-ti-bsp/conf/machine/include/j721e.inc:IMAGE_BOOT_FILES += "sysfw-j721e-gp-evm.itb"
meta-ti-bsp/conf/machine/include/j721e.inc:IMAGE_BOOT_FILES += "sysfw-j721e_sr2-hs-fs-evm.itb"
meta-ti-bsp/conf/machine/include/j721e.inc:IMAGE_BOOT_FILES += "sysfw-j721e_sr1_1-hs-evm.itb"
This firmware list can also be verified with the firmware name used in
the u-boot devicetree k3-*-binman.dtsi files.
On the SK-AM62B-P1, three tiboot3 binaries are built, one for each boot
ROM variant:
tiboot3-am62x-gp-evm.bin
tiboot3-am62x-hs-evm.bin
tiboot3-am62x-hs-fs-evm.bin
A tiboot3.bin symlink is provided as default choice:
tiboot3.bin -> tiboot3-am62x-hs-fs-evm.bin
On this board, the tiboot3.bin symlink links to the hs-fs variant
but it not always de case for all TI K3 devices.
(ex: J721e use gp variant by default).
The tiboot3.bin symlink links the -gp, -hs-fs, -hs tiboot3 binary
according to where "symlink = "tiboot3.bin";" line is located in
k3-*binman.dtsi.
As reported by Michael Walle [2], such firmware name can also be
customized by a SBC vendor [3], so we can't always be sure which
firmware to use.
If required, let the user provide a custom tiboot3 or sysfw firmware
name from the defconfig. Otherwise use the default firmware choice
by copying tiboot3.bin and sysfw.itb symlinks.
[1] https://source.denx.de/u-boot/u-boot/-/blob/v2024.01/doc/board/ti/k3.rst
[2] http://lists.busybox.net/pipermail/buildroot/2024-April/688943.html
[3] https://elixir.bootlin.com/u-boot/v2024.04/source/arch/arm/dts/k3-am625-phycore-som-binman.dtsi#L14
Reviewed-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Although -Wmain-return-type is not considered as error (unlike
-Wimplicit-int), but just a warning, let's fix it for the future.
<stdin>:1:1: warning: return type of 'main' is not 'int' [-Wmain-return-type]
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Recent version of U-Boot use binman to provide a mechanism for building
images, from simple SPL + U-Boot combinations, to more complex
arrangements with many parts.
This tool uses additional host python modules that must be provided by
Buildroot. So introduce a new option BR2_TARGET_UBOOT_USE_BINMAN to
add additional host packages in U-Boot build dependency to use binman.
The binman requirement is directly included in buildman dependency
(tools/buildman/requirements.txt) since within U-Boot, binman is
invoked by the build system, here buildman [1].
[1] https://docs.u-boot.org/en/v2024.01/develop/package/binman.html#invoking-binman-within-u-boot
Co-developed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Recent version of U-Boot use binman to provide a mechanism for building
images, from simple SPL + U-Boot combinations, to more complex
arrangements with many parts.
This tool uses additional host python modules that must be provided by
Buildroot. So introduce a new option
BR2_TARGET_TI_K3_R5_LOADER_USE_BINMAN to add additional host packages
in U-Boot build dependency to use binman.
When BR2_TARGET_TI_K3_R5_LOADER_USE_BINMAN is set, BINMAN_INDIRS
environment variable to provide the directory to search for binary
blobs and select the packages required by binman. Make sure that
ti-k3-boot-firmware package has been installed before building
ti-k3-r5-loader in order to provide such firmwares.
The BR2_TARGET_TI_K3_R5_LOADER_USE_BINMAN option is currently needed
since we are in the middle of the process to switch TI AM62 and AM64
board defconfig to binman. Keep BR2_TARGET_TI_K3_R5_LOADER_USE_BINMAN
disabled for them until the u-boot/ti-k3-r5-loader version bump to
2024.01.
The dependency of binman is not really easy to follow. First we have
the packages list from binman.rst [1] then we have to install
additional python modules [2]. Maybe in the future it will be
necessary to add host-lzma and host-lz4 in the dependencies list.
[1] https://source.denx.de/u-boot/u-boot/-/blob/v2024.01/tools/binman/binman.rst?plain=1#L377
[2] https://source.denx.de/u-boot/u-boot/-/blob/v2024.01/tools/buildman/requirements.txt
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Co-developed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
BR2_TARGET_UBOOT_NEEDS_TI_K3_DM option has been introduced initially to
support certain TI K3 devices such as AM62x and AM62Ax that require a
Device Manager (DM) firmware.
This option needs to be renamed to use a more generic name in order
to cover further TI K3 SoCs support along with the new u-boot binman
tool that will be added in followup patch. With binman enabled in
u-boot on TI K3 SoC, ti-k3-boot-firmware is needed at buildtime to
provide ti-sysfw (System Firmware) for all TI K3 SoC along with Device
Manager (DM) firmware for AM62x and AM62Ax devices.
With binman support enabled, we don't need to provide the path of the
Device Manager firmware anymore (see [2]).
We can remove DM="<DM firmware>.xer5f" from UBOOT_MAKE_OPTS.
It also means that we can also remove BR2_TARGET_UBOOT_TI_K3_DM_SOCNAME
used to define DM path.
DM=$(BINARIES_DIR)/ti-dm/$(UBOOT_TI_K3_DM_SOCNAME)/ipc_echo_testb_mcu1_0_release_strip.xer5f
For now, keep BR2_TARGET_UBOOT_TI_K3_DM_SOCNAME and DM only when
ti-k3-image-gen is used. We need to update ti_am62x_sk_defconfig
to use binman before removing them along with ti-k3-image-gen.
[1] 52ce606c05
[2] https://software-dl.ti.com/processor-sdk-linux/esd/AM62X/09_01_00_08/exports/docs/linux/Foundational_Components/U-Boot/UG-General-Info.html
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
We are going to enable BR2_DOWNLOAD_FORCE_CHECK_HASHES by default
to enforce downloads to have at least one valid hash including
those that use a custom version.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
openssl is optional, not mandatory since the addition of the package in
commit 8aaa7ecbce
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Fix the following build failure with gcc >= 13:
In file included from ../src/basic/macro.h:446,
from ../src/basic/alloc-util.h:10,
from ../src/shared/install.c:12:
../src/shared/install.c: In function ‘install_changes_dump’:
../src/shared/install.c:444:64: error: ‘%s’ directive argument is null [-Werror=format-overflow=]
444 | err = log_error_errno(changes[i].type, "Failed to %s unit, unit %s does not exist.",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/e0d6b7d41fefec539a17a3ef5c89c192ce29fd04
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
- Fix a potential denial of service caused by accepting arbitrary
length primes as potential elliptic curve parameters in ASN.1
encodings. With very large inputs the primality verification
can become computationally expensive. Now any prime field larger
than 1024 bits is rejected immediately.
https://botan.randombit.net/news.html#version-3-3-0-2024-02-20
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Vulnerabilities
- [High] CVE-2024-0901 Potential denial of service and out of bounds
read. Affects TLS 1.3 on the server side when accepting a connection
from a malicious TLS 1.3 client. If using TLS 1.3 on the server side
it is recommended to update the version of wolfSSL used.
- [Med] CVE-2024-1545 Fault Injection vulnerability in
RsaPrivateDecryption function that potentially allows an attacker
that has access to the same system with a victims process to perform
a Rowhammer fault injection.
- [Med] Fault injection attack with EdDSA signature operations. This
affects ed25519 sign operations where the system could be susceptible
to Rowhammer attacks.
No official tarball provided so switch to github and set autoreconf
https://github.com/wolfSSL/wolfssl/releases/tag/v5.7.0-stable
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Fix the following build failure with kernel >= 6.8:
/home/autobuild/autobuild/instance-8/output-1/build/dahdi-linux-3.3.0/drivers/dahdi/xpp/card_global.c: In function ‘parse_chip_command’:
/home/autobuild/autobuild/instance-8/output-1/build/dahdi-linux-3.3.0/drivers/dahdi/xpp/card_global.c:345:9: error: implicit declaration of function ‘strlcpy’; did you mean ‘strscpy’? [-Werror=implicit-function-declaration]
345 | strlcpy(buf, cmdline, MAX_PROC_WRITE); /* Save a copy */
| ^~~~~~~
| strscpy
Fixes:
- http://autobuild.buildroot.org/results/a0d2dcd10af9bf465ded2da83eccf2d137187477
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The LIBS environment variable is ignored since bump to version 1.0.1 and
switch to cmake build system in commit
203725a46b resulting in the following
build failure:
/home/buildroot/autobuild/run/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-musleabihf/12.3.0/../../../../arm-buildroot-linux-musleabihf/bin/ld: CMakeFiles/clamonacc.dir/inotif/hash.c.o: in function `onas_ht_add_hierarchy':
hash.c:(.text+0xa84): undefined reference to `fts_open'
Fixes: 203725a46b
- http://autobuild.buildroot.org/results/fe71ab29d02caeed609f1a181fccbd46b6feff65
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This bump will fix the following build failure with gcc 5 raised since
bump to version 57 in commit 65c8a9b662
thanks to
https://github.com/benhoyt/inih/commit/4e618f77d4bae216865c5abd972d99b1ba5031e2:
In file included from /home/buildroot/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/mips-linux-gnu/include/c++/5.3.0/cstdint:35:0,
from ../cpp/INIReader.h:17,
from ../cpp/INIReader.cpp:16:
/home/buildroot/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/mips-linux-gnu/include/c++/5.3.0/bits/c++0x_warning.h:32:2: error: #error This file requires compiler and library support for the ISO C++ 2011 standard. This support is currently experimental, and must be enabled with the -std=c++11 or -std=gnu++11 compiler options.
#error This file requires compiler and library support for the \
^
https://github.com/benhoyt/inih/releases/tag/r58
Fixes: 65c8a9b662
- http://autobuild.buildroot.org/results/7a5ba516cde536e103669a0422d336dd8a3b1dbc
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
QorIQ processors family also includes LS Series wich are based on aarch64
Signed-off-by: David Gouarin <dgouarin@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Only the 32bit ARM blob provides the framebuffer backend. This is
apparently independent of which imx8 derivate is used, so changed
the condition for the config option accordingly.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
dmraid is a very old package from 2010 with an awkward configure script
which doesn't honor CFLAGS:
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 '
[...]
## ----------------- ##
## Output variables. ##
## ----------------- ##
AWK='gawk'
CC='/home/autobuild/autobuild/instance-3/output-1/host/bin/sh4a-buildroot-linux-musl-gcc'
CFLAGS='-O2'
resulting in the following build failure with musl >= 1.2.4 and
https://github.com/bminor/musl/commit/25e6fee27f4a293728dd15b659170e7b9c7db9bc
because _LARGEFILE64_SOURCE is not set:
/home/autobuild/autobuild/instance-3/output-1/host/lib/gcc/sh4a-buildroot-linux-musl/12.3.0/../../../../sh4a-buildroot-linux-musl/bin/ld: misc/file.o: in function `rw_file':
file.c:(.text+0x150): undefined reference to `lseek64'
To fix this issue, pass TARGET_CONFIGURE_OPTS through DMRAID_MAKE_OPTS
Fixes:
- http://autobuild.buildroot.org/results/5c7c82959ce92db908d3ca20e2c1137509c2f981
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
sortGrid()'s handling of git hashes and other large hex numbers
has been inconsistent, they can be detected as strings or numbers
depending on what type of character they start with.
This patch fixes the behaviour by using a regex to capture everything
that looks like a big hex number and treat it as a string.
This means when you sort by current version ascending all the version
strings with big hex numbers should show up first, sorted 0-9,a-f.
First we check for a string length >= 39, and then apply a regex
to return an array with every char from that string that matched
the regex. If the length of this array is still >= 39 we can assume
we are looking at something containing a git hash.
The reason why the length is defined as ">= 39" and not "40" or
"39 or 40" is twofold:
Firstly, 39 was chosen as a minimum to match stuff with 39 char git
hashes, like the rockchip-mali package.
Secondly, there is no max because we actually want to catch not
just explicitly git hashes, but any verson string with big gnarly
hex numbers in it.
Stuff like: "1.4.2-168-ged3039cdbeeb28fc0011c3585d8f7dfb91038292"
Why? Well, the idea is less about git hashes and sorting
and more about grouping similarly formatted version strings.
It would be impossble (or at least annoyingly complicated) and of
dubious utility to get a real sequential sort out of the
current version column, so the attempt here is to at the very
least collect all the similarly formatted things together.
This isn't perfect, but it's a (arguably) more useful sorted
output than before.
A demo is available here:
https://sen-h.codeberg.page/pkg-stats-demos/@pages/fix-improve-git-hash-sorting.html
Signed-off-by: Sen Hastings <sen@hastings.org>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Because the div_class variable was not reassigned a value,
cells in the latest_version column were still being assigned
hash_file classes and so were being picked up as elements in
the hash_file sort. This lead to execessive grid gap elements
stacking up and creating huge blank spaces at the top of the page.
This is very noticable on pages with a large number of packages,
like the ones the autobuilder creates.
original behaviour(click the "Hash file" column label twice):
http://autobuild.buildroot.org/stats/master.html
demo of fixed behaviour:
https://sen-h.codeberg.page/pkg-stats-demos/@pages/fix-bug-when-sorting-by-hash-file.html
Signed-off-by: Sen Hastings <sen@hastings.org>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Fix the following x86 build failure raised since bump to version 1.8.0
in commit 81802e263a and
https://gitlab.eclipse.org/eclipse/tcf/tcf.agent/-/commit/8df5540c53b862d516ac25f908c2fff4a547b4a6:
/home/buildroot/autobuild/run/instance-1/output-1/build/tcf-agent-1.8.0/agent/tcf/services/tcf_elf.c: In function 'unpack_elf_symbol_info':
/home/buildroot/autobuild/run/instance-1/output-1/build/tcf-agent-1.8.0/agent/tcf/services/tcf_elf.c:2079:27: error: 'STT_ARM_16BIT' undeclared (first use in this function)
2079 | if (info->type == STT_ARM_16BIT) {
| ^~~~~~~~~~~~~
/home/buildroot/autobuild/run/instance-1/output-1/build/tcf-agent-1.8.0/agent/tcf/services/tcf_elf.c:2079:27: note: each undeclared identifier is reported only once for each function it appears in
/home/buildroot/autobuild/run/instance-1/output-1/build/tcf-agent-1.8.0/agent/tcf/services/tcf_elf.c: In function 'create_symbol_addr_search_index':
/home/buildroot/autobuild/run/instance-1/output-1/build/tcf-agent-1.8.0/agent/tcf/services/tcf_elf.c:2228:78: error: 'STT_ARM_16BIT' undeclared (first use in this function)
2228 | if (type == STT_FUNC || type == STT_ARM_TFUNC || type == STT_ARM_16BIT) {
| ^~~~~~~~~~~~~
Fixes: 81802e263a
- http://autobuild.buildroot.org/results/8388acf59689ed7e621bdf158483e3df1cf9bef7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Instead of enumerating each binary, which is cumbersome and may miss
some of them, simply install all binaries starting with rtl88.
Signed-off-by: Karthikeyan Krishnasamy <karthikeyan@linumiz.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Fix the following build failure raised since bump of glibc to version
2.39 in commit b5680f53d6:
src/lib/missing.c:31:7: error: conflicting types for 'crypt'; have 'char *(char *, char *)'
31 | char *crypt(UNUSED char *key, char *salt)
| ^~~~~
In file included from src/freeradius-devel/missing.h:60,
from src/freeradius-devel/libradius.h:71,
from src/lib/missing.c:26:
/home/buildroot/autobuild/instance-2/output-1/host/mipsel-buildroot-linux-gnu/sysroot/usr/include/unistd.h:1162:14: note: previous declaration of 'crypt' with type 'char *(const char *, const char *)'
1162 | extern char *crypt (const char *__key, const char *__salt)
| ^~~~~
Fixes: b5680f53d6
- http://autobuild.buildroot.org/results/dc45f1291245a0dadd382cea2ad41573ad976d60
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2024.02 Bootlin toolchains have been released, so let's update the
support in Buildroot. Notable changes:
- Bleeding edge toolchains now use binutils 2.42, and stable
toolchains use binutils 2.41. This fixes binutils bug 27597
for both.
- glibc has been updated to 2.39
- musl has been updated to 1.2.5, which brings 32-bit RISC-V
support. Due to this, 2 new toolchain variants are added: 32-bit
RISC-V stable, 32-bit RISC-V bleeding edge.
- Bleeding edge toolchains now use 5.15 kernel headers, and stable
toolchains now use 4.19 kernel headers
- Fortran support has been disabled on Microblaze, as the libgfortran
build at -O2 causes an internal compiler error.
All runtime tests are passing, except the ones for the new RISC-V
32-bit musl toolchain, for which Busybox fails to build due to an
interaction between musl-specific code in Busybox and musl. This issue
has been reported:
https://www.openwall.com/lists/musl/2024/03/03/2
The runtime tests are nevertheless included, with the hope that this
issue will reasonably quickly be resolved.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The current version is more than 2 years old. Update to the latest.
This fixes runtime issues with the newer kernel used in our defconfigs
since commit 13ba668a2d.
License file changed name from LICENCE to LICENSE but is otherwise
unchanged.
There is a new directory "synaptics", install this one as well.
A lot of the files are symlinks. "install" creates copies for these,
which consumes a lot of unnecessary space. Instead of individually
restoring the links, using `cp --remove-destination --no-dereference`
and `chmod` instead of `install`.
Fixes: 13ba668a2d
Signed-off-by: Nisarg Jhaveri <nisargjhaveri@gmail.com>
[Arnout: correct license file name]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Update the license hash because of a change in copyright year:
- Copyright (C) 1997-2023 Sam Lantinga <slouken@libsdl.org>
+ Copyright (C) 1997-2024 Sam Lantinga <slouken@libsdl.org>
Signed-off-by: Michael Fischer <mf@go-sys.de>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
According to https://www.sourceware.org/gdb/:
This is a minor corrective release over GDB 14.1, fixing the following issues:
PR symtab/31112 (DLL export forwarding is broken)
PR c++/31128 (gdb crashes when trying to print a global variable stub without a running inferior)
PR tdep/31254 ([gdb/tdep, arm] FAIL: gdb.threads/staticthreads.exp: up 10)
PR gdb/31256 (Crash with basic 'list .')
PR python/31366 (Frame.static_link() segfaults)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure raised since bump of glibc to version
2.39 in commit b5680f53d6:
/home/autobuild/autobuild/instance-7/output-1/host/lib/gcc/aarch64_be-buildroot-linux-gnu/12.3.0/../../../../aarch64_be-buildroot-linux-gnu/bin/ld: cannot find -lcrypt: No such file or directory
Fixes: b5680f53d6
- http://autobuild.buildroot.org/results/ab7c1ff0649bec21584654431e722efe2dc88c3d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: coding style]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When glibc was bumped to version 2.39 in commit
b5680f53d6 it removed the deprecated
libcrypt support.
Due to this removal dropbear was unable to accept connections using
password authentication.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Tested-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure raised since bump of glibc to version
2.39 in commit b5680f53d6:
/home/autobuild/autobuild/instance-13/output-1/host/lib/gcc/mips-buildroot-linux-gnu/11.4.0/../../../../mips-buildroot-linux-gnu/bin/ld: CMakeFiles/hiawatha.dir/src/httpauth.c.o: in function `basic_http_authentication':
/home/autobuild/autobuild/instance-13/output-1/build/hiawatha-11.2/src/httpauth.c:334:(.text+0x614): undefined reference to `crypt'
Fixes: b5680f53d6
- http://autobuild.buildroot.org/results/8054bd47edf613a12b09a9958f78abd5f355f17b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure raised since bump of glibc to version
2.39 in commit b5680f53d6:
/home/autobuild/autobuild/instance-6/output-1/per-package/linux-pam/host/bin/../lib/gcc/or1k-buildroot-linux-gnu/13.2.0/../../../../or1k-buildroot-linux-gnu/bin/ld: .libs/pam_pwhistory_la-opasswd.o: in function `compare_password':
opasswd.c:(.text+0x26c): undefined reference to `crypt'
Fixes: b5680f53d6
- http://autobuild.buildroot.org/results/e17911978febb7b25112940a7c40037b3f98d491
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure raised since bump of glibc to version
2.39 in commit b5680f53d6:
/home/autobuild/autobuild/instance-4/output-1/host/lib/gcc/armeb-buildroot-linux-gnueabi/12.3.0/../../../../armeb-buildroot-linux-gnueabi/bin/ld: CMakeFiles/uhttpd.dir/main.c.o: in function `main':
/home/autobuild/autobuild/instance-4/output-1/build/uhttpd-15346de8d3ba422002496526ee24c62a3601ab8c/main.c:437:(.text.startup+0x628): undefined reference to `crypt'
Fixes: b5680f53d6
- http://autobuild.buildroot.org/results/ccd789b301b6ddcca1b29e26d5cc48d54427a001
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure raised since bump of glibc to version
2.39 in commit b5680f53d6:
/home/autobuild/autobuild/instance-5/output-1/per-package/dante/host/bin/../lib/gcc/sparc64-buildroot-linux-gnu/12.3.0/../../../../sparc64-buildroot-linux-gnu/bin/ld: auth_password.o: in function `passwordcheck':
/home/autobuild/autobuild/instance-5/output-1/build/dante-1.4.3/sockd/auth_password.c:126:(.text+0xc4): undefined reference to `crypt'
Fixes: b5680f53d6
- http://autobuild.buildroot.org/results/c817caa1e9ad91a1c0f61d92f24d35612cc3a5d5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The arm-gnu-toolchain is used by TI's K3 generation of devices to
compile the first stage bootloader (tiboot3.bin) which will run on the
32bit R5 MCU.
The 10.3-2021.10 version of this toolchain is no longer publicized as
being downloadable (and it's fairly old) on ARM's website. Let's upgrade
to the latest version of the toolchain ARM (13.2-rel1)
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BR2_PACKAGE_TIFF_JBIG did actually not do anything, as no explicit
--enable-jbig was passed to configure and there is no libjbig in Buildroot,
so drop it and instead explicitly disable jbig support.
Also add --disable-jbig for the host build, which was missed when host
support was added in commit 91b16fbbf9 (tiff: add host variant).
As the TIFF_JBIG option was a noop, do not add legacy handling for it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We do not have liblerc in Buildroot and it may cause linking issues for
host-tiff on build hosts with liblerc:
libtool: link: /usr/bin/gcc -O2
-I/home/dragon/src/ft/ftcommunity-TXT/output/build/rootfs/per-package/host-tiff/host/include
-Wall -W -Wl,-rpath
-Wl,/home/dragon/src/ft/ftcommunity-TXT/output/build/rootfs/per-package/host-tiff/host/lib
-o tiffcp tiffcp.o
-L/home/dragon/src/ft/ftcommunity-TXT/output/build/rootfs/per-package/host-tiff/host/lib
../libtiff/.libs/libtiff.so ../port/.libs/libport.a -lLerc -ljbig -lm
-Wl,-rpath
-Wl,/home/dragon/src/ft/ftcommunity-TXT/output/build/rootfs/build/host-tiff-4.6.0/libtiff/.libs
-Wl,-rpath
-Wl,/home/dragon/src/ft/ftcommunity-TXT/output/build/rootfs/per-package/host-tiff/host/lib
/usr/bin/ld: ../libtiff/.libs/libtiff.so: undefined reference to
`deflateInit_'
/usr/bin/ld: ../libtiff/.libs/libtiff.so: undefined reference to `deflate'
/usr/bin/ld: ../libtiff/.libs/libtiff.so: undefined reference to
`deflateEnd'
/usr/bin/ld: ../libtiff/.libs/libtiff.so: undefined reference to `inflate'
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No longer active in Buildroot. Keeping my name in the list sets the wrong
expectation regarding package updates or support.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
bpftrace is a high-level tracing language for Linux enhanced Berkeley
Packet Filter (eBPF) available in recent Linux kernels (4.1 and later).
Only tested on x86_64.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Jugurtha BELKALEM <jugurtha.belkalem@smile.fr>
Cc: Qais Yousef <qyousef@layalina.io>
Signed-off-by: Mat Martineau <martineau@kernel.org>
[Arnout:
- Remove duplicate 'depends on BR2_TOOLCHAIN_HAS_THREADS'
- Fix Config.in comment text and dependencies
- Order dependencies alphabetically
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
bcc is a front-end tool for eBPF:
https://github.com/iovisor/bcc/blob/master/README.md
eBPF is the most powerful Linux tracer, and bcc allows writing eBPF
scripts in C and PYTHON3.
bcc can help to troubleshoot issues quickly on embedded systems (as long
as Linux kernel version >= 4.1).
bcc can also make it easy to create observabilty tools, SDN
configuration, ddos mitigation, intrusion detection and secure
containers. More information is available at: https://ebpf.io/
BCC can be tested on the target :
$ mount -t debugfs none /sys/kernel/debug
$ cd /usr/share/bcc/tools
$ ./execsnoop
Signed-off-by: Jugurtha BELKALEM <jugurtha.belkalem@smile.fr>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Qais Yousef <qais.yousef@arm.com>
Reviewed-by: Qais Yousef <qais.yousef@arm.com>
Cc: Qais Yousef <qyousef@layalina.io>
Signed-off-by: Mat Martineau <martineau@kernel.org>
[Arnout: order dependencies alphabetically, fix Config.in comment]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
swupdate supports both the old and the new API, so HAVE_LIBGPIOD is
enabled if either is enabled.
Signed-off-by: Boerge Struempfel <bstruempfel@ultratronik.de>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Due to a significant api change as well as more recent kernel version
requirements, we introduce a separate package for version 2.0 and higher.
The new package is incompatible to libgpiod 1.x. This allows for iteratively
updating all dependent packages without breaking anything as a result.
For now we will have libgpiod2 depend on !libgpiod. However, in the
future, it might be preferable to have it the other way around,
such that packages, which select libgpiod2 don't have to also add the
the !libgpiod dependency.
Python bindings fail to build, so they are unconditionally disabled.
setup.py when called from Makefile tries to do native compilation
instead of cross-compilation, which fails at link time with
/usr/bin/ld: skipping incompatible ../../lib/.libs//libgpiod.so when searching for -lgpiod
Note that this package does not correspond to the debian libgpiod2 package,
which currently uses only version 1.6.3
Signed-off-by: Boerge Struempfel <bstruempfel@ultratronik.de>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Fix a typo in the dependencies, and switch the type to 'exec'.
This ensures that the psplash-systemd service will find the
FIFO created by psplash.
Change the psplash-systemd dependency to BindsTo, so stopping
psplash itself will also end this service and free resources.
psplash-start service need to start early, otherwise it might try
to compete/take away the framebuffer from the final graphical
stack. Order it before sysinit.target.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Run script with 'errexit' bash option to detect any errors from
subcommands.
It will fix situation where 'ddr_fw.bin' was missing but successfull
build created broken boot image. Post image script report this by:
cat: /home/user/buildroot/output/images/ddr_fw.bin: No such file or directory
and build finish with success.
Signed-off-by: Wojciech Nizinski <wojciech.nizinski@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BR2_PACKAGE_LIBDRM_INTEL was dependent on BR2_i386
or BR2_x86_64, which made sense for integrated GPUs.
This is no longer valid with discrete GPUs so remove
this dependency to allow building on other CPU
architectures.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When glibc was bumped to version 2.39 in commit
b5680f53d6 it removed the deprecated
libcrypt support.
As glibc's libcrypt was providing sysvinit's libcrypt dependency this
broke the sysvinit build using glibc version 2.39.
To fix this select the libxcrypt dependency to sysvinit when using a
glibc toolchain and add the dependency if selected.
Fixes:
http://autobuild.buildroot.net/results/3a9/3a99389bd7b6db7f9467b34c7bead1d58ce5a18d/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When glibc was bumped to version 2.39 in commit
b5680f53d6 it removed the deprecated
libcrypt support.
As glibc's libcrypt was providing squid's libcrypt dependency this
broke the squid build using glibc version 2.39.
To fix this select the libxcrypt dependency to squid when using a
glibc toolchain and add the dependency if selected.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When glibc was bumped to version 2.39 in commit
b5680f53d6 it removed the deprecated
libcrypt support.
As glibc's libcrypt was providing pure-ftpd's libcrypt dependency this
broke the pure-ftpd build using glibc version 2.39.
To fix this select the libxcrypt dependency to pure-ftpd when using a
glibc toolchain and add the dependency if selected.
Fixes:
http://autobuild.buildroot.net/results/2a62f48973b30873f4da842e75176633398bef86/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When glibc was bumped to version 2.39 in commit
b5680f53d6 it removed the deprecated
libcrypt support.
As glibc's libcrypt was providing lighttpd's libcrypt dependency this
broke the lighttpd build using glibc version 2.39.
To fix this select the libxcrypt dependency to lighttpd when using a
glibc toolchain and add the dependency if selected.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When glibc was bumped to version 2.39 in commit
b5680f53d6 it removed the deprecated
libcrypt support.
As glibc's libcrypt was providing leafnode2's libcrypt dependency this
broke the leafnode2 build using glibc version 2.39.
To fix this select the libxcrypt dependency to leafnode2 when using a
glibc toolchain and add the dependency if selected.
Fixes:
http://autobuild.buildroot.net/results/08f86ce128623105087cda0c5b32a1d0d0cfa166/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When glibc was bumped to version 2.39 in commit
b5680f53d6 it removed the deprecated
libcrypt support.
As glibc's libcrypt was providing freeswitch's libcrypt dependency this
broke the freeswitch build using glibc version 2.39.
To fix this select the libxcrypt dependency to freeswitch when using a
glibc toolchain and add the dependency if selected.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When glibc was bumped to version 2.39 in commit
b5680f53d6 it removed the deprecated
libcrypt support.
As glibc's libcrypt was providing dovecot's libcrypt dependency this
broke the dovecot build using glibc version 2.39.
To fix this select the libxcrypt dependency to dovecot when using a
glibc toolchain and add the dependency if selected.
Fixes:
http://autobuild.buildroot.net/results/99d816fb7a033ec73a958200041f0dcd728e0e87/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When glibc was bumped to version 2.39 in commit
b5680f53d6 it removed the deprecated
libcrypt support.
As glibc's libcrypt was providing apr's libcrypt dependency this broke
the apache build using glibc version 2.39.
To fix this select the libxcrypt dependency to apr when using a glibc
toolchain and add the dependency if selected.
Fixes:
http://autobuild.buildroot.net/results/11ccf857a70ae9f44e8d3ae39fc01db68632ca64/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When glibc was bumped to version 2.39 in commit
b5680f53d6 it removed the deprecated
libcrypt support.
As glibc's libcrypt was providing apg's libcrypt dependency this broke
the apg build using glibc version 2.39.
To fix this select the libxcrypt dependency to apg when using a glibc
toolchain and add the dependency if selected.
Fixes:
http://autobuild.buildroot.net/results/3df84ae300bb648492cffc21e4481fc5abf02aeb/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When glibc was bumped to version 2.39 in commit
b5680f53d6 it removed the deprecated
libcrypt support.
As glibc's libcrypt was providing screen's libcrypt dependency this
broke any screen build using glibc version 2.39.
To fix this select the libxcrypt dependency for screen when using a
glibc toolchain and add the dependency if selected.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When glibc was bumped to version 2.39 in commit
b5680f53d6 it removed the deprecated
libcrypt support.
As glibc's libcrypt was providing luaposix's libcrypt dependency this
broke any luaposix build using glibc version 2.39.
To fix this select the libxcrypt dependency to luaposix when using a
glibc toolchain and add the dependency if selected.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr: use more traditional ifeq-endif block]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When glibc was bumped to version 2.39 in commit
b5680f53d6 it removed the deprecated
libcrypt support.
As glibc's libcrypt was providing systemd's libcrypt dependency this
broke any systemd build using glibc version 2.39.
To fix this add the libxcrypt dependency to systemd which is the
preferred way of providing libcrypt support in systemd as the glibc
variant is only used as a fallback due to being deprecated.
We should also have host-systemd depend on host-libxcrypt in case
the host system does not provide glibc with libcrypt support.
Fixes:
- http://autobuild.buildroot.net/results/36e/36efcfc76c015c9b4c955c13afa0f81a98b529f4
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is needed by host-systemd.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr: set the host _CONF_OPTS]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 4cbac9f706 removed 2 lvm2 patches
and renamed the two remaining ones, but forgot to update
.checkpackageignore. Do so now.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Announce:
https://lists.freedesktop.org/archives/wayland-devel/2023-November/043326.html
Drop -Dlauncher-libseat=true, as it has been dropped upstream [1].
Also drop the BR2_PACKAGE_SEATD_DAEMON, which was added in
commit 6d67793128
"package/weston: select the seatd daemon", and
commit 9d6f966f9a
"package/weston: don't select seatd daemon if we have logind",
as it is not strictly needed anymore.
In package/seatd/Config.in we have:
select BR2_PACKAGE_SEATD_BUILTIN \
if !BR2_PACKAGE_SYSTEMD_LOGIND && !BR2_PACKAGE_SEATD_DAEMON
Here we have:
select BR2_PACKAGE_SEATD_DAEMON if !BR2_PACKAGE_SYSTEMD_LOGIND
This makes it impossible to select BR2_PACKAGE_SEATD_BUILTIN as the -only-
backend if not BR2_PACKAGE_SYSTEMD_LOGIND, so drop it altogether. This kind
of logic should be selected in the device defconfigs or by packages that
really need one specific backend.
[1]: https://gitlab.freedesktop.org/wayland/weston/-/commit/e3b6ed50f1c3c259c51274c78d08b58>
Signed-off-by: Thomas Devoogdt <thomas.devoogdt@barco.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Now that setuptools and its dependencies are using pep517 we can
migrate the setuptools infrastructure itself to use the pep517
build frontend.
As part of this we need to migrate the all python packages using
_BUILD_OPTS to the new config settings format used by the pep517
build frontend.
We need to use a setup.cfg file to pass the pg_config path when
building python-psycopg2 as this package needs the pg_config
path for all internal build stages while -C--build-option= only
passes the flag to the internal bdist_wheel stage.
Use new setup type variables to define setup type specific
dependencies instead of using the conditional block.
In python-m2crypto, the --openssl option is a build_ext option
so we need to add -C--build-option build_ext in front of it.
We also need to set --skip-dependency-check for the following
packages which specify build dependencies that are not actually
required:
- python-lxml
- python-matplotlib
- python-msgpack
- python-pymupdf
- python-uvloop
- python-wsaccel
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Arnout: fix indentation in python-pyzmq]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
When migrating to setuptools with pep517 support we need to add
host-python-cython which is a pep517 build dependency for
python-pyzmq.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
We need to migrate package/python-simplelogging to the pep517
poetry-core backend as setuptools is not supported when building
with a pep517 frontend.
This package currently builds using setuptools as we do not yet
use setuptools with a pep517 build frontend. The package contains
a setuptools fallback which only can be used when using setuptools
without a pep517 frontend as the pep517 frontend will only use the
build backend specified in the package pyproject.toml which is
poetry-core and not setuptools.
We also need to add a patch which switches from poetry to poetry
core as we do not support the full poetry package.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
We need to migrate python-sh to the pep517 poetry-core
backend as setuptools is not supported when building with a pep517
frontend.
This package currently builds using setuptools as we do not yet
use setuptools with a pep517 build frontend. The package contains
a setuptools fallback which only can be used when using setuptools
without a pep517 frontend as the pep517 frontend will only use the
build backend specified in the package pyproject.toml which is
poetry-core and not setuptools.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
We need to migrate python-rsa to the pep517 poetry-core
backend as setuptools is not supported when building with a pep517
frontend.
This package currently builds using setuptools as we do not yet
use setuptools with a pep517 build frontend. The package contains
a setuptools fallback which only can be used when using setuptools
without a pep517 frontend as the pep517 frontend will only use the
build backend specified in the package pyproject.toml which is
poetry-core and not setuptools.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The python-sip package requires distutils which is no longer included
with python but is now part of setuptools.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
We need to migrate python-pylibftdi to the pep517 poetry-core
backend as setuptools is not supported when building with a pep517
frontend.
This package currently builds using setuptools as we do not yet
use setuptools with a pep517 build frontend. The package contains
a setuptools fallback which only can be used when using setuptools
without a pep517 frontend as the pep517 frontend will only use the
build backend specified in the package pyproject.toml which is
poetry-core and not setuptools.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The host-python-setuptools-scm dependency needs to be added
prior to migrating setuptools to pep517 as this dependency
is listed as a build requirement in the pyproject.toml.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
We need to migrate python-iso8601 to the pep517 poetry-core
backend as setuptools is not supported when building with a pep517
frontend.
This package currently builds using setuptools as we do not yet
use setuptools with a pep517 build frontend. The package contains
a setuptools fallback which only can be used when using setuptools
without a pep517 frontend as the pep517 frontend will only use the
build backend specified in the package pyproject.toml which is
poetry-core and not setuptools.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The host-python-setuptools-scm will be enforced once we migrate
setuptools to use a pep517 build frontend.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
When building with a pep517 frontend we need to use the specified
build backend as opposed to the fallback setuptools build which
only works when not building with a pep517 frontend.
This package currently builds using setuptools as we do not yet
use setuptools with a pep517 build frontend. The package contains
a setuptools fallback which only can be used when using setuptools
without a pep517 frontend as the pep517 frontend will only use the
build backend specified in the package pyproject.toml which is
an internal backend and not setuptools.
The custom in tree backend depends on setuptools and expandvars,
additionally it depends on cython 3 unless disabled.
As we do not currently support cython 3, let's use the pure python
build instead.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Add comment explaining about Cython 3 dependency]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
When building with a pep517 frontend we need to use the specified
build backend as opposed to the fallback setuptools build which
only works when not building with a pep517 frontend.
This package currently builds using setuptools as we do not yet
use setuptools with a pep517 build frontend. The package contains
a setuptools fallback which only can be used when using setuptools
without a pep517 frontend as the pep517 frontend will only use the
build backend specified in the package pyproject.toml which is
hatchling and not setuptools.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
We need to migrate python-flask-babel to the pep517 poetry-core
backend as setuptools is not supported when building with a pep517
frontend.
This package currently builds using setuptools as we do not yet
use setuptools with a pep517 build frontend. The package contains
a setuptools fallback which only can be used when using setuptools
without a pep517 frontend as the pep517 frontend will only use the
build backend specified in the package pyproject.toml which is
poetry-core and not setuptools.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
We need to migrate python-dnspython to the pep517 poetry-core backend
as setuptools is not supported when building with a pep517 frontend.
This package currently builds using setuptools as we do not yet
use setuptools with a pep517 build frontend. The package contains
a setuptools fallback which only can be used when using setuptools
without a pep517 frontend as the pep517 frontend will only use the
build backend specified in the package pyproject.toml which is
poetry-core and not setuptools.
setuptools-scm is not mentioned in pyproject.toml (only in setup.cfg),
so not needed as a dependency when using poetry-core.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
We need to migrate python-dbus-fast to the pep517 poetry-core backend
as setuptools is not supported when building with a pep517 frontend.
This package currently builds using setuptools as we do not yet
use setuptools with a pep517 build frontend. The package contains
a setuptools fallback which only can be used when using setuptools
without a pep517 frontend as the pep517 frontend will only use the
build backend specified in the package pyproject.toml which is
poetry-core and not setuptools.
We do need to additinally keep a dependency on host-python-setuptools
as that is specified as an additional build requirement.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The host-python-setuptools-scm dependency needs to be added
prior to migrating setuptools to pep517 as this dependency
is listed as a build requirement in the pyproject.toml.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit 9f94b3b354 "package/iperf3: bump to version 3.16" updated
the package but forgot to reflect a breaking change mentioned in
the release note [1], "iperf3 now requires pthreads and C atomic
variables to compile and run".
When the toolchain has no atomic support, or the libatomic is not
added in the linker flags, the compilation now fail with output:
arm-buildroot-linux-gnueabi/bin/ld: ./.libs/libiperf.so: undefined reference to '__atomic_load_8'
This issue can be seen when running the iperf3 runtime test, with
command:
support/testing/run-tests \
-d dl -o output_test \
tests.package.test_iperf3
This commit fixes the issue by adding a dependency on
BR2_TOOLCHAIN_HAS_ATOMIC and by adding an upstream patch to detect
if linking to libatomic is needed.
Fixes: [2]
[1] https://github.com/esnet/iperf/releases/tag/3.16
[2] https://gitlab.com/buildroot.org/buildroot/-/jobs/6466933622
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The trace-cmd runtime test has a typo and fails with output:
Traceback (most recent call last):
File "/build/buildroot/support/testing/tests/package/test_trace_cmd.py", line 53, in test_run
self.assertEquals(exit_code, 0)
^^^^^^^^^^^^^^^^^
AttributeError: 'TestTraceCmd' object has no attribute 'assertEquals'. Did you mean: 'assertEqual'?
The issue can be reproduced with the command:
support/testing/run-tests \
-d dl -o output_test \
tests.package.test_trace_cmd
This commit fixes the issue by removing the extra 's'.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, when we generate .checkpackageignore, we store, for each
error, only the name of the function that generated that error.
Although we currently do not have two check libs that have same-name
check functions, there is nothing that would prevent that, and there
is no reason why two unrelated libs could not implement checks with
the same name.
If such a situation were to arise, we'd have no way, when parsing the
ignore list (in-tree: .checkpackageignore), to know which of the libs
the exclusion would apply to.
Fix that by storing both the library and function names together. The
leading "checkpackagelib." (with the trailing dot, 16 chars) is removed
for brevity, because it's present in all libs' names.
As a consequence, regenerate .checkpackageignore.
Note: people using that script to validate their br2-external trees will
also have to regenerate their own exclusion list if they have one.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@datacom.com.br>
Reviewed-by: Arnout Vandecappelle <arnout@mind.be>
The hash files do not use trailing backslash \ to continue lines, so
we don't want them to be interpreted thusly, so we use 'read -r'
(SC2162).
The h_file is used twice in the same loop, once for reading from it,
and once just to print it, so there is no conflict (SC2094).
Integrer variables need not be quoted (SC2086). In any case, should
there be an actual issue and they be set empty, that would cause a
runtime issue, wether they be quoted or not.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
the user tables do not use trailing backslash \ to continue lines,
so we don't want them to be interpreted thusly, so we use 'read -r'
(SC2162).
Integer variables need not be quoted (SC2086). In any case, should
there be an actual issue and they be set empty, that would cause a
runtime issue, wether they be quoted or not.
The binary -o and -a ar perfectly defined in bash's test (SC2166).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 41ea61d59c (support/scripts/mkusers: allow option for system
uid/gid) confused GID and UID variables: the GID limits were used to
create UIDs.
Fix that.
Note that this fixes a shellcheck error; although there are many more
shellcheck errors, these fixes are semantically a bug that need to be
fixed separately from the coding style issues reported by shellcheck.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Norbert Lange <nolange79@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Updates containerd to v1.7.14.
Highlights
Fix various timing issues with docker pusher
Register imagePullThroughput and count with MiB
Move high volume event logs to Trace level
Container Runtime Interface (CRI)
Handle pod transition states gracefully while listing pod stats
Runtime
Update runc-shim to process exec exits before init
https://github.com/containerd/containerd/releases/tag/1.7.14
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Disable tests to avoid the following build failure raised since the
addition of the package in commit
d8a729d173:
../tests/intel/kms_pm_backlight.c: In function '__igt_unique____real_main257':
../tests/intel/kms_pm_backlight.c:320:32: error: implicit declaration of function 'basename'; did you mean 'rename'? [-Werror=implicit-function-declaration]
320 | name = basename(full_name);
| ^~~~~~~~
| rename
Fixes: d8a729d173
- http://autobuild.buildroot.org/results/ff5de58ca9408f3a4fc6b6d5bd8c62093c1021ad
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following m68k build failure with gcc 12:
In file included from ../src/lxc/syscall_wrappers.h:19,
from ../src/lxc/mount_utils.h:15,
from ../src/lxc/conf.h:24,
from ../src/lxc/log.h:19,
from ../src/lxc/storage/btrfs.c:20:
../src/lxc/syscall_numbers.h:423:25: error: macro names must be identifiers
423 | #define -1
| ^
Fixes:
- http://autobuild.buildroot.org/results/f40a517eba86838b11b4b1d6a8a05b8233a3394d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop patch that is included in this release. Drop autoreconf that was
introduced for this patch.
Fixes the following security issues:
* CVE-2024-2004
* CVE-2024-2379
* CVE-2024-2398
* CVE-2024-2466
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update to the latest major release of docker-engine.
Fixes CVE-2024-29018: potential data exfiltration from 'internal'
networks via authoritative DNS servers. Do not forward requests to
external DNS servers for a container that is only connected to an
'internal' network.
https://github.com/moby/moby/releases/tag/v26.0.0
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
zic needs CC defined since version bump to 2024a, and upstream commit
c3ebd8e98846 (make Makefile more compatible with POSIX).
Use HOST_CONFIGURE_OPTS which contains the appropriate host CC setting,
as well as our host CFLAGS and LDFLAGS.
Fixes:
c99 -O1 -c -o zic.o zic.c
make[2]: c99: No such file or directory
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr: reword commit log, refer to upstream commit]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The 3 patches we had have all been merged upstream as of 2.39, so they
can be dropped.
The libcrypt library is gone from glibc, and therefore the
--enable-crypt option is also gone.
The LICENSES file has changed with the addition of a copyright notice
from IBM (some files contributed by IBM have been relicensed), and the
license is MIT, which is already listed in GLIBC_LICENSES, so no
changes are needed on our side.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- also update localedef
- rebase localedef patches
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In preparation for the upgrade of glibc to version 2.39, we need to
backport some gcc patches. Indeed glibc 2.39 drops libcrypt, causing a
build failure of libsanitizer (part of gcc) as it has code to
intercept crypt() and crypt_r() calls. This has been fixed in gcc
master, but we need to backport the fix for gcc 11.x, 12.x and 13.x.
gcc 8.x doesn't need to be fixed because (1) its libsanitizer does not
have an interceptor for crypt()/crypt_r() and (2) we only allow gcc
8.x for PowerPC SPE, for which we only support uClibc-ng, so this
issue with crypt/crypt_r going away from glibc is not relevant.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 32934b526b (utils/checkpackagelib: check for Upstream trailers)
introduced a new python module to check Upstream tags in patch files. In
doing so, it introduced a flake8 coding style issue. That was not caught
when applying the change, and neither was it caught by our daily checks,
because the .checkpackagefile was regenerated right just in the next
commit, to apply ignore patterns to existing patch files.
It is a bit sad that one of our checks does not itself passes all our
checks...
Fix that trivial issue now.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, one may only specify one list of arguments that are passed to
several scripts (BR2_ROOTFS_PRE_BUILD_SCRIPT, BR2_ROOTFS_POST_BUILD_SCRIPT,
BR2_ROOTFS_POST_FAKEROOT_SCRIPT and BR2_ROOTFS_POST_IMAGE_SCRIPT_ARGS).
So one has to be careful that the arguments for these scripts do noti
collide.
To allow specifiying dedicated arguments to each type of scripts, new
config options are introduced. For backward compatibility the value of
BR2_ROOTFS_POST_SCRIPT_ARGS is still passed to the scripts. But now one
can add specific arguments from the new config option.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr:
- mention common args in help texts
- slight coding style beautification
- slight rewording in commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, we pass BR2_ROOTFS_POST_SCRIPT_ARGS to each of the scripts in
BR2_ROOTFS_PRE_BUILD_SCRIPT, but the option is not exposed in menuconfig
when only pre-build scripts are used.
Add the pre-build scripts to the condition exposing the extra args
option.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We need to migrate python-bleak to the pep517 poetry-core backend
as setuptools is not supported when building with a pep517 frontend.
This package currently builds using setuptools as we do not yet
use setuptools with a pep517 build frontend. The package contains
a setuptools fallback which only can be used when using setuptools
without a pep517 frontend as the pep517 frontend will only use the
build backend specified in the package pyproject.toml which is
poetry-core and not setuptools.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
We need to add a patch which selects the correct flit build
backend.
As flit is configured as the pep517 build backend for aiologstash
we need to migrate from setuptools to flit prior to migrating
setuptools to pep517 as the frontend will not fall back to using
setuptools once migrated.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
When building with a pep517 frontend we need to use the specified
build backend as opposed to the fallback setuptools build which
only works when not building with a pep517 frontend.
Fixes:
ERROR Backend 'hatchling.build' is not available.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
When migrating to setuptools with pep517 support we need to add
host-python-cython which is a pep517 build dependency for pyyaml.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Arnout: order dependencies alphabetically]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
We need to migrate python-terminaltables to the pep517 poetry-core
backend as setuptools is not supported when building with a pep517
frontend.
This package currently builds using setuptools as we do not yet
use setuptools with a pep517 build frontend. The package contains
a setuptools fallback which only can be used when using setuptools
without a pep517 frontend as the pep517 frontend will only use the
build backend specified in the package pyproject.toml which is
poetry-core and not setuptools. Thus, specifying setuptools as the build
backend is simply wrong.
The current release of python-terminaltables still uses poetry rather
than poetry-core as a build backend. poetry is much more heavyweight, it
would need to pull in a large number of build dependencies. Therefore,
include an upstream patch to switch from poetry to poetry-core.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Arnout: use a patch instead of sed]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
David's e-mail is bouncing:
<david.bachelart@bbright.com>: host aspmx.l.google.com[2a00:1450:400c:c0c::1a]
said: 550-5.1.1 The email account that you tried to reach does not exist.
Please try 550-5.1.1 double-checking the recipient's email address for
typos or 550-5.1.1 unnecessary spaces. For more information, go to 550
5.1.1 https://support.google.com/mail/?p=NoSuchUser
n19-20020a05600c4f9300b00414111d4396si2497070wmq.117 - gsmtp (in reply to
RCPT TO command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is the current version on main branch.
For Apache-2.0 licensed fonts, there are new fonts, and fonts that
have been removed.
For OFL-1.0 fonts, there are new fonts, fonts removed, but also fonts
where the license file has changed. In this latter case, the changes
are http:// to https:// in some URLs, copyright year changes, a minor
update of the OFL license (from Feb 1, 2007 to Feb 26, 2007, which has
a small rewording), text rewrapping.
Signed-off-by: Christian Hitz <christian.hitz@bbv.ch>
[Thomas: extracted from
https://patchwork.ozlabs.org/project/buildroot/patch/20240228145013.411919-2-christian@klarinett.li/,
added details about license file changes]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit ebe5d9edfe ("boot, package,
support, toolchain: switch to 2 spaces for the hash file"), all hash
files were migrated to use 2 spaces as the separator.
However, in the googlefontdirectory hash file, a command is present in
a comment to indicate how to generate the part of the hash file that
provides the list of license file hashes. This command was not updated
as part of ebe5d9edfe, so it still emits
a result in which a single space is used a separator between the hash
type (sha256) and the hash value.
This commit fixes that by using a 2-space separator.
Signed-off-by: Christian Hitz <christian.hitz@bbv.ch>
[Thomas: extracted from
https://patchwork.ozlabs.org/project/buildroot/patch/20240228145013.411919-2-christian@klarinett.li/
into a separate patch]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add 0005-skip-configuration-dependency-if-unit-tests-are-disa.patch, which
fixes gtk+-3.0 being an unconditional requirement.
Other changes:
Flutter 3.19.x made Wayland and X11 an unconditional requirement, resulting in
the following errors when compiling:
"""
../../flutter/third_party/swiftshader/src/WSI/libWaylandClient.hpp:18:10: fatal error: 'wayland-client.h' file not found
18 | #include <wayland-client.h>
| ^~~~~~~~~~~~~~~~~~
../../flutter/third_party/swiftshader/src/WSI/WaylandSurfaceKHR.cpp:15:
../../flutter/third_party/swiftshader/src/WSI/WaylandSurfaceKHR.hpp:22:10: fatal error: 'wayland-client.h' file not found
22 | #include <wayland-client.h>
| ^~~~~~~~~~~~~~~~~~
1 error generated.
[1369/11229] CC obj/flutter/third_party/sqlite/sqlite.sqlite3.o
"""
After raising an issue found here:
https://github.com/flutter/flutter/issues/144635 and after several hours of
searching, the problem is https://github.com/flutter/buildroot/commit/d01da2716
which hardcodes the following values if building for a Linux platform:
- ozone_platform_x11 = true
- ozone_platform_wayland = true
As upstream maintainers listed the above as low priority (P3), a simple fix is
to add two additional sed calls in FLUTTER_ENGINE_VULKAN_X11_SUPPORT_FIXUP and
FLUTTER_ENGINE_VULKAN_WAYLAND_SUPPORT_FIXUP which set ozone_platform_x11 and
ozone_platform_wayland to the appropriate values.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The maintainers of the flutter-gallery package archived the project as of
February 16, 2024. In addition, the flutter-gallery package is incompatible
with Flutter 3.19.x. Now that the flutter tests do not use this package, it
is safe to drop it.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The maintainers of the flutter-gallery package archived the project as of
February 16, 2024. In addition, the flutter-gallery package is incompatible
with Flutter 3.19.x. Because of these problems, using the flutter-gallery
package as the testing application for Flutter is no longer reasonable nor
maintainable.
However, it is reasonable to use the flutter-markdown-example package from
flutter-packages, as it is a first-party application updated regularly and
often automatically, ensuring compatibility with the latest versions of
Flutter.
- Switch the package used for Flutter testing from flutter-gallery to
flutter-markdown-example
- Rename flutter-gallery.service to flutter-markdown-example.service
- Change /usr/share/flutter/gallery/release/ to
/usr/share/flutter/flutter_markdown_example/release/
- Run `systemctl is-active flutter-markdown-example` instead of
`systemctl is-active flutter-gallery`
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Displays a custom "Hello, World!" custom widget in a
remote Flutter widget (RFW) for use by a remote widget.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This package uses the NetworkImageWithRetry method to download the Flutter
logo. The package requires ca-certificates, or else SSL errors occur when
the application attempts to download the image.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
A Flutter plugin that manages files and interactions with file dialogs.
This package contains a dart_plugin_registrant dart file, much like the
flutter-gallery package. The build commands contain the three
lines from the flutter-gallery package referencing the
dart_plugin_registrant dart file.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This package provides two multi-sized tiles and different layouts:
Stagger and Wrap.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This package provides examples of the following animations:
- OpenContainer
- SharedAxisTransition
- FadeThroughTransisiton
- FadeScaleTransition
The package also provides a toggle that slows all the animations.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This package provides a nice-looking Gmail lookalike application using
Material 3.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The maintainers of the flutter-gallery package archived the project as of
February 16, 2024, necessitating a new reference package for users to port
their Flutter applications to Buildroot. The flutter-packages repository is
the perfect candidate for a reference package for several reasons:
- It contains the source code for Flutter's first-party packages.
- Many of the packages contain examples.
- Many of the examples include Linux-specific examples.
- The repository is updated regularly and often automatically, ensuring
compatibility with the latest versions of Flutter.
However, the layout of the flutter-packages repository stores all of the
examples in sub-directories, which creates an organizational problem; either
every example application is stored in packages/flutter-example-${name}, with
the version, site, site_method, license, license_files, and dependencies of
each package independent from each other, or, each example application is in a
sub-directory of the flutter-packages directory, and flutter-packages acts as
the primary source of the above variables.
As option one is a nightmare to maintain, this patch provides option two,
which only necessitates the use of two features rarely used together in
Buildroot: $(PKG_NAME)_DL_SUBDIR and $(PKG_NAME)_SOURCE. With these two options
appropriately set, each sub-package uses the flutter-packages source tarball,
which downloads once, saving time, disk space, bandwidth, and future
maintenance headaches.
Three variables in the .mk file help with subsequent patches that add more
example applications:
- FLUTTER_MARKDOWN_EXAMPLE_PKG_NAME:
- Set to the name of the application.
- FLUTTER_MARKDOWN_EXAMPLE_INSTALL_DIR:
- It uses the PKG_NAME variable to set the installation directory.
- FLUTTER_MARKDOWN_EXAMPLE_SUBDIR:
- Provides the directory in which to build the package.
With the above variables, adding subsequent packages involves minimal effort:
- Copy, paste, and rename a sub-directory to a new package name.
- Set the above variables to new names and directories.
- Check to see if there are any new build commands, such as specifying a
dart_plugin_registrant.dart file.
Another option that seems appealing is to have a single package, with the
Config.in options to select which example(s) to build. However, this option
does not work well for two reasons:
- The logic between this package and the flutter-gallery package it replaces
would be very different. As the flutter-gallery package acts as a reference
package for other users, changing the logic would make the package difficult
to parse and possibly useless for other users to use as a reference when
porting their Flutter-based applications to Buildroot.
- Not all packages in the flutter-package repository use the same directory
structure. Take, for example, the flutter-rfw-local-example. The build
directory is located at rfw/example/local, whereas most other packages are
at ${pkg_name}/example, which makes a pure-foreach loop impossible.
These packages are intended for reference, and changing the logic instead of
using the same would hinder users from attempting to port their Flutter
applications to Buildroot. As such, this option is ruled out for the above
reasons.
The first package in this series is a Markdown example application that
displays several Markdown formatting demos. However, it does not support inline
HTML. This package also lacks a dart_plugin_registrant file, and unlike the
flutter-gallery package, the lines referencing such a file are not included in
the build commands. This is not a problem, but is something to note.
Also, the `FLUTTER_RUNTIME_MODES=$(FLUTTER_ENGINE_RUNTIME_MODE)` line from the
configure commands is not copied from the flutter-gallery package, as it was
included by mistake and did not have any effecton the clean command.
Note: The version of the flutter-packages git hash is set to
947e34ce9fedcdd6750b54eb1cc74b854b49ab48, the last commit that supported
Flutter 3.16.x. Newer versions require Flutter 3.19.x
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Add a third bootstrap stage with Go1.21.x necessary for go1.22 bootstrap.
go-bootstrap-stage1 is Go1.4.x, the final version to support bootstrap using a C
compiler (later versions require the Go compiler for bootstrapping).
See: https://go.dev/doc/install/source#bootstrapFromSource
go-bootstrap-stage2 is Go 1.19.13, the last version to support bootstrap using
the Go1.4.x compiler.
go-bootstrap-stage3 is Go 1.21.8, the last version to support bootstrap using
the Go1.19.13 compiler. Go 1.20 requires a minimum of go 1.17.13 to bootstrap.
See: https://go.dev/doc/go1.20#bootstrap
This patch is in preparation for bumping the host-go package to >go1.22.x, which
requires a minimum of Go1.20.x for bootstrap.
See: https://go.dev/doc/go1.22#bootstrap
Signed-off-by: Christian Stewart <christian@aperture.us>
[Arnout: add GOCACHE definition]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Update to the latest 1.19.x version available.
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The project now has its own group on github, so switch to that one. Also
update the Config.in URL to point to that one - the sourceforge project
is pretty much abandoned.
What's Changed
- add UTF-8 support for Client7z by @flyfishzy in #214
- fix issue 130 by @jinfeihan57 in 295dac8
Signed-off-by: André Zwing <nerv@dawncrow.de>
[Arnout: also update URL; extend commit message]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit 24e996d14d (package/xvisor: fix build without python interpreter)
added a dependency on host-python3 for the d2c.py script, but this script
does not use any non-standard python modules so we can instead use
BR2_PYTHON3_HOST_DEPENDENCY to only build host-python3 if the build host
does not have python3.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 9496ff57e5 (package/openssh: bump to version 9.7p1) dropped
0001-better-detection-of-broken-fzero-call-used-regs.patch but forgot to
drop the autoreconf. Do that now.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 748fc4be21 (package/pkg-utils.mk: remove trailing slash in pkgdir
definition) broke the docs generation logic:
make manual-html
>>> Preparing the manual sources...
>>> Generating HTML manual...
a2x: ERROR: missing ASCIIDOC_FILE: /home/peko/source/buildroot/output/build/docs/manual/manual.adoc
make: *** [docs/manual/manual.mk:12: /home/peko/source/buildroot/output/docs/manual/manual.html] Error 1
As it now ends up with the .adoc file one level below
(../docs/manual/manual/manual.adoc). The reason is that the pkgdir macro is
used to define $(2)_DOCDIR, which is passed to rsync:
rsync -a docs/manual /home/peko/source/buildroot/output/build/docs/manual
Fix it by appending a / to the rsync arguments like we do elsewhere.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Busybox tc fails to build with kernel >= 6.8
For details see https://bugs.busybox.net/show_bug.cgi?id=15934
In addition, tc is a very rarely used tool, so not something that you
expect to be available in busybox by default.
Therefore, remove it from the default config.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The bitcoin Buildroot package has always disabled the wallet support.
This commit adds a config option to enable this support. This allows the
bitcoin-cli command to create wallets, generate addresses and send an
amount to a given address.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
IGT GPU Tools is a collection of tools for development and testing of
the DRM drivers
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Andy Yan <andyshrk@163.com>
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
[Bernd: v4
- add myself to DEVELOPERS
- add dependencies to locales, mmu, wchar and headers >= 4.11
- rework libunwind dependency
- remove duplicate libglib2 dependency
v5
- added optional dependency to json_c
- remove broken igt_stats binary
v6
- updated patch series after upstream review
v8
- bumped to current git HEAD to fix musl build errors
- removed all patches which are included in upstream repo
- added fix for segfaults with hardened toolchains on x86/x86_64]
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
[Francois: v7
- depend on !BR2_RELRO_FULL
- remove specific workaround for igt_stats binary]
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This patch upgrades the ATF version to the v2.8 LTS version. Please note
that due to DTS changes from upstream commit
51e223058fe70b311542178f1865514745fa7874 ("feat(stm32mp15-fdts): add
Avenger96 board with STM32MP157A DHCOR SoM") The ATF additional build
variable is also modified to use the new DTS file. Note that the old DTS
file still exists, but no longer works.
Furthermore, the 'E=0' flag is removed from ATF additional build
variable. It was added by commit
deb8d71c92 to avoid TFA build
failure because of '-Werror' flag. However, from version v2.6 or later,
it is not required anymore, the compiler warning was fixed.
The ATF patch
"board/arrow/avenger96/patches/arm-trusted-firmware/
0001-stm32mp157a-avenger96.dts-enable-hash-device-to-unbr.patch" also
has been removed. As it was not required due to using the new dhcore DTS
file for the ATF build.
Signed-off-by: Javad Rahimipetroudi <javad.rahimipetroudi@mind.be>
[Arnout: switch to
BR2_TARGET_ARM_TRUSTED_FIRMWARE_LATEST_LTS_2_8_VERSION instead of custom
lts-v2.8.16]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This patch upgrades Kernel version to 6.6.22 LTS on avenger96 board.
Beside that, In accordance with the kernel 6.5rc1 commit
724ba6751532 ("ARM: dts: Move .dts files to vendor sub-directories")
the device tree path also has been modified to point the device tree in
the proper location.
As another change, due to commit 3108eb2e8aa7
("mmc: mmci: Set PROBE_PREFER_ASYNCHRONOUS"), the order of SD card and
eMMC probing has swapped. The SD card is now mmcblk0 instead of
mmcblk1. Thus, the default root append (mmcblk1p4) in 'extlinux.conf'
file in the overlay directory of the board is changed, otherwise the
rootfs was not possible to be detected.
Signed-off-by: Javad Rahimipetroudi <javad.rahimipetroudi@mind.be>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Fix the following build failure when the configuration files are
installed as root:
id: 'privoxy': no such user
******************************************************************
WARNING! WARNING! installing config files as root!
It is strongly recommended to run privoxy as a non-root user,
and to install the config files as that user and/or group!
Please read INSTALL, and create a privoxy user and group!
*******************************************************************
make[1]: *** [GNUmakefile:861: install] Error 1
This failure is probably raised since the addition of the package in
commit f8a263fe36 and
https://www.privoxy.org/gitweb/?p=privoxy.git;a=commit;h=26baf6bcc0b5db47b8cf5c55eece0614712b5180
Fixes:
- http://autobuild.buildroot.org/results/28d8ca6f0e2d81d62196a0958c9274ad2c8c9871
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit 6ea2a27f90 forgot to add -lucontext
to LIBS resulting in the following build failure with zeromq:
/home/buildroot/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/i586-buildroot-linux-musl/9.3.0/../../../../i586-buildroot-linux-musl/bin/ld: /home/buildroot/instance-0/output-1/host/i586-buildroot-linux-musl/sysroot/usr/lib32/libunwind.so.8: undefined reference to `setcontext'
Fixes: 6ea2a27f90
- http://autobuild.buildroot.org/results/893defe1588b2ca03c115b59b47be3f4aed438fb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
GMP does not build if the host gcc is v4.9 due to the following error
gen-sieve.c: In function 'setmask':
gen-sieve.c:99:3: error: 'for' loop initial declarations are only allowed in C99 or C11 mode
for (unsigned i = 0; i < 2 * a * b; ++i)
^
gen-sieve.c:99:3: note: use option -std=c99, -std=gnu99, -std=c11 or -std=gnu11 to compile your code
The gen-sieve utility was added in GMP v6.3.0. It is built using
CC_FOR_BUILD (host compiler) during cross compilation as it generates
build files. Autoconf does not have a macro for add -std=c99 to
CC_FOR_BUILD, so it must be set manually. For the target, it is set
correctly thanks to the AC_PROG_CC_C99 macro.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Set default editor to /bin/vi to fix the following build failure when no
editor is found on host:
configure:40833: checking for vim
configure:40862: result: no
configure:40833: checking for vi
configure:40862: result: no
configure:40833: checking for emacs
configure:40862: result: no
configure:40833: checking for nano
configure:40862: result: no
configure:40833: checking for pico
configure:40862: result: no
configure:40833: checking for edit
configure:40862: result: no
configure:40874: error:
Failed to find a text file editor. CVS cannot be compiled
without a default log message editor. Searched for
`vim vi emacs nano pico edit'. Try `configure --with-editor'.
While at it, drop CVS_CONFIGURE_ARGS variable for simplicity
Fixes:
- http://autobuild.buildroot.org/results/5b8a747698bc2e64eb1f001e87577e86e4cb8d14
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Scott Fan <fancp2007@gmail.com>
[Arnout: move to definition of pkgdir instead of PKGDIR]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Enables U-Boot and required OpenSBI builds for the VisionFive2. Changes
the sdcard.img to use GPT and adds the SPL and U-Boot to partitions
specified in U-Boot's documentation for the board:
https://docs.u-boot.org/en/v2024.01/board/starfive/visionfive2.html
U-Boot config uses BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME with value
"u-boot.itb". Using BR2_TARGET_UBOOT_FORMAT_ITB fails, because the
build does not support u-boot.itb make target.
Signed-off-by: Lukasz Tekieli <tekieli.lukasz@gmail.com>
[Peter: document boot mode setting, add U-Boot documentation link]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following static build failure raised since bump to version 0.18
in commit 136d4dfbe6:
/home/autobuild/autobuild/instance-0/output-1/host/bin/arceb-buildroot-linux-uclibc-gcc -o src/libpciaccess.so.0.11.1 src/libpciaccess.so.0.11.1.p/common_bridge.c.o src/libpciaccess.so.0.11.1.p/common_iterator.c.o src/libpciaccess.so.0.11.1.p/common_init.c.o src/libpciaccess.so.0.11.1.p/common_interface.c.o src/libpciaccess.so.0.11.1.p/common_io.c.o src/libpciaccess.so.0.11.1.p/common_capability.c.o src/libpciaccess.so.0.11.1.p/common_device_name.c.o src/libpciaccess.so.0.11.1.p/common_map.c.o src/libpciaccess.so.0.11.1.p/linux_sysfs.c.o src/libpciaccess.so.0.11.1.p/linux_devmem.c.o src/libpciaccess.so.0.11.1.p/common_vgaarb.c.o -Wl,--as-needed -Wl,--no-undefined -Wl,-O1 -shared -fPIC -Wl,--start-group -Wl,-soname,libpciaccess.so.0 -static /home/autobuild/autobuild/instance-0/output-1/host/arceb-buildroot-linux-uclibc/sysroot/usr/lib/libz.a -Wl,--end-group
/home/autobuild/autobuild/instance-0/output-1/host/lib/gcc/arceb-buildroot-linux-uclibc/11.4.0/../../../../arceb-buildroot-linux-uclibc/bin/ld: /home/autobuild/autobuild/instance-0/output-1/host/lib/gcc/arceb-buildroot-linux-uclibc/11.4.0/crtbeginT.o: relocation R_ARC_32_ME against `__TMC_END__' can not be used when making a shared object; recompile with -fPIC
Fixes: 136d4dfbe6
- http://autobuild.buildroot.org/results/7604706f4f4ab96a485a1dabe7cb4c98a2ef27d4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Fix the following build failure raised since bump of libressl to version
3.5.2 in commit 8b216927db:
red-stream.cpp: In function 'RedStreamSslStatus red_stream_ssl_accept(RedStream*)':
red-stream.cpp:526:22: error: invalid use of incomplete type 'SSL' {aka 'struct ssl_st'}
526 | stream->priv->ssl->s3->flags |= SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS;
| ^~
In file included from /home/buildroot/autobuild/instance-1/output-1/host/i686-buildroot-linux-gnu/sysroot/usr/include/openssl/err.h:120,
from red-stream.cpp:33:
/home/buildroot/autobuild/instance-1/output-1/host/i686-buildroot-linux-gnu/sysroot/usr/include/openssl/ossl_typ.h:173:16: note: forward declaration of 'SSL' {aka 'struct ssl_st'}
173 | typedef struct ssl_st SSL;
| ^~~~~~
Fixes:
- http://autobuild.buildroot.org/results/273eadf9e49af55e0932a8293ca65762fb43114f
- http://autobuild.buildroot.org/results/97601f321efc532de0c2ea6aa618ce11fad9e851
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enable DES in openssl to avoid the following build failure raised since
commit a83d41867c:
In file included from /home/buildroot/autobuild/run/instance-2/output-1/build/mariadb-10.11.6/libmysqld/../sql/mysqld.cc:50,
from /home/buildroot/autobuild/run/instance-2/output-1/build/mariadb-10.11.6/libmysqld/lib_sql.cc:34:
/home/buildroot/autobuild/run/instance-2/output-1/build/mariadb-10.11.6/libmysqld/../sql/des_key_file.h:26:3: error: 'DES_cblock' does not name a type
26 | DES_cblock key1, key2, key3;
| ^~~~~~~~~~
/home/buildroot/autobuild/run/instance-2/output-1/build/mariadb-10.11.6/libmysqld/../sql/des_key_file.h:31:3: error: 'DES_key_schedule' does not name a type; did you mean 'st_des_keyschedule'?
31 | DES_key_schedule ks1, ks2, ks3;
| ^~~~~~~~~~~~~~~~
| st_des_keyschedule
Fixes: a83d41867c
- http://autobuild.buildroot.org/results/bd067de9c2699dc9628c00b929a01890b14d53c1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
btrfs doesn't depend on btrfs-progs but on headers >= 4.12 since bump to
version 24.0.2 in commit 314f62eda3 and
https://github.com/moby/moby/commit/3208dcabdc8997340b255f5b880fef4e3f54580d
resulting in the following build failure:
daemon/graphdriver/btrfs/btrfs.go:13:6: error: #error "Headers from kernel >= 4.12 are required to build with Btrfs support."
#error "Headers from kernel >= 4.12 are required to build with Btrfs support."
^~~~~
daemon/graphdriver/btrfs/btrfs.go:14:6: error: #error "HINT: Set 'DOCKER_BUILDTAGS=exclude_graphdriver_btrfs' to build without Btrfs."
#error "HINT: Set 'DOCKER_BUILDTAGS=exclude_graphdriver_btrfs' to build without Btrfs."
^~~~~
daemon/graphdriver/btrfs/btrfs.go:18:10: fatal error: linux/btrfs_tree.h: No such file or directory
#include <linux/btrfs_tree.h>
^~~~~~~~~~~~~~~~~~~~
Fixes: 314f62eda3
- http://autobuild.buildroot.org/results/7d07eba37149d341dc86f9742bd166de874dcd5e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
btrfs handling doesn't depend on btrfs-progs but on kernel >= 4.12 since
bump to version 1.7.7 in commit 79e01ef950
and
https://github.com/containerd/containerd/commit/024a748c092cbddde0918f2e93a646ce50116e11
resulting in the following build failure:
In file included from vendor/github.com/containerd/btrfs/v2/btrfs.go:21:0:
./btrfs.h:19:2: error: #error "Headers from kernel >= 4.12 are required on compilation time (not on run time)"
#error "Headers from kernel >= 4.12 are required on compilation time (not on run time)"
^~~~~
In file included from vendor/github.com/containerd/btrfs/v2/btrfs.go:21:0:
./btrfs.h:22:10: fatal error: linux/btrfs_tree.h: No such file or directory
#include <linux/btrfs_tree.h>
^~~~~~~~~~~~~~~~~~~~
Fixes: 79e01ef950
- http://autobuild.buildroot.org/results/d6afeef47daae1783dcce3e2b6a0a16e3e5d5fbd
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with musl >= 1.2.5 (raised since commit
f7f03445cf):
/home/autobuild/autobuild/instance-9/output-1/build/mraa-2.2.0/src/mraa.c: In function 'mraa_count_iio_devices':
/home/autobuild/autobuild/instance-9/output-1/build/mraa-2.2.0/src/mraa.c:341:38: error: implicit declaration of function 'basename'; did you mean 'rename'? [-Werror=implicit-function-declaration]
341 | if (fnmatch(IIO_DEVICE_WILDCARD, basename(path), 0) == 0) {
| ^~~~~~~~
| rename
Fixes: f7f03445cf
- http://autobuild.buildroot.org/results/1f16df70e49a9f8823a791c0fcc677de07136835
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Pieterjan Camerlynck <pieterjanca@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Currently, we grab the per-year CVE feeds, in two passes: first, we grab
the meta files, and check whether something has changed since last we
downloaded it; second, we download the feed proper, unless the meta file
has not changed, in which case we use the locally cached feed.
However, it has appeared that the FKIE releases no longer provide the
meta files, which means that (once again), our daily reports are broken.
The obvious fix would be to drop the use of the meta file, and always
and unconditionally download the feeds. That's relatively trivial to do,
but the feeds are relatively big (even as xz-xompressed).
However, the CVE database from FKIE is available as a git tree. Git is
pretty good at only sending delta when updating a local copy. In
addition, the git tree, contains each CVE as an individual file, so it
is relatively easier to scan and parse.
Switch to using a local git clone.
Slightly surprisingly (but not so much either), parsing the CVE files is
much faster when using the git working copy, than it is when parsing the
per-year feeds: indeed, the per-year feeds are xz-compressed, and even
if python is slow-ish to scan a directory and opening files therein, it
is still much faster than to decompress xz files. The timing delta [0]
is ~100s before and ~10s now, about a ten time improvement, over the
whole package set.
The drawback, however, is that the git tree is much bigger on-disk, from
~55MiB for the per-year compressed feeds, to 2.1GiB for the git tree
(~366MiB) and a working copy (~1.8GiB)... Given very few people are
going to use that, that's considered acceptable...
Eventually, with a bit of hacking [1], the two pkg-stats, before and
after this change, yield the same data (except for the date and commit
hash).
[0] hacking support/scripts/pkg-stats to display the time before/after
the CVE scan, and hacking support/scripts/cve.py to do no download so
that only the CVE scan happens (and also because the meta files are no
longer available).
[1] sorting the CVE lists in json, sorting the json keys, and using the
commit from the FKIE git tree that was used for the current per-year
feeds.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
All in-tree configs with the ti-k3-r5 bootloader use a custom version,
so this patch is mostly for the menuconfig default version.
Keep the old hash so that defconfigs still have a hash to validate
downloads against.
Suggested-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[yann.morin.1998@free.fr: keep the old hash]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 6b2329bb80 ("configs/ti_am64x_sk: new defconfig") forgot to
specify the ti-k3-r5-loader, so do that now.
When the defconfig was added, the default version was 2022.10, so use it.
Suggested-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 4b8fddb060 ("configs/ti_am62x_sk: new defconfig") forgot to
specify the ti-k3-r5-loader, so do that now.
When the defconfig was added, the default version was 2022.10, so use it.
Suggested-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Using PLATFORM=k3 can leads to a runtime boot crash on some K3 SoC (e.g.
j721e) because the optee flavor is missing.
We could use BR2_TARGET_OPTEE_OS_PLATFORM=k3 and
BR2_TARGET_OPTEE_OS_PLATFORM_FLAVOR=am64x but we actually can use
BR2_TARGET_OPTEE_OS_PLATFORM=k3-am64x as explained in the optee-os
Makefile [1]:
# If $(PLATFORM) is defined and contains a hyphen, parse it as
# $(PLATFORM)-$(PLATFORM_FLAVOR) for convenience
This is how meta-ti set the optee-os platform:
meta-ti]$ git grep OPTEEMACHINE
meta-ti-bsp/conf/machine/am437x-hs-evm.conf:OPTEEMACHINE = "ti-am43xx"
meta-ti-bsp/conf/machine/am57xx-hs-evm.conf:OPTEEMACHINE = "ti-am57xx"
meta-ti-bsp/conf/machine/beagleplay.conf:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/dra7xx-hs-evm.conf:OPTEEMACHINE = "ti-dra7xx"
meta-ti-bsp/conf/machine/include/am62axx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am62pxx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am62xx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am64xx.inc:OPTEEMACHINE = "k3-am64x"
meta-ti-bsp/conf/machine/include/am65xx.inc:OPTEEMACHINE = "k3-am65x"
meta-ti-bsp/conf/machine/include/j7200.inc:OPTEEMACHINE = "k3-j721e"
meta-ti-bsp/conf/machine/include/j721e.inc:OPTEEMACHINE = "k3-j721e"
meta-ti-bsp/conf/machine/include/j721s2.inc:OPTEEMACHINE = "k3-j784s4"
meta-ti-bsp/conf/machine/include/j722s.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/j784s4.inc:OPTEEMACHINE = "k3-j784s4"
meta-ti uses the OPTEEMACHINE to set optee-os platform [2].
[1] https://github.com/OP-TEE/optee_os/blob/4.0.0/Makefile#L37
[2] https://git.yoctoproject.org/meta-arm/tree/meta-arm/recipes-security/optee/optee-os.inc?h=4.0.3#n23
Suggested-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Using PLATFORM=k3 can leads to a runtime boot crash on some K3 SoC (e.g.
j721e) because the optee flavor is missing.
We could use BR2_TARGET_OPTEE_OS_PLATFORM=k3 and
BR2_TARGET_OPTEE_OS_PLATFORM_FLAVOR=am62x but we actually can use
BR2_TARGET_OPTEE_OS_PLATFORM=k3-am62x as explained in the optee-os
Makefile [1]:
# If $(PLATFORM) is defined and contains a hyphen, parse it as
# $(PLATFORM)-$(PLATFORM_FLAVOR) for convenience
This is how meta-ti set the optee-os platform:
meta-ti]$ git grep OPTEEMACHINE
meta-ti-bsp/conf/machine/am437x-hs-evm.conf:OPTEEMACHINE = "ti-am43xx"
meta-ti-bsp/conf/machine/am57xx-hs-evm.conf:OPTEEMACHINE = "ti-am57xx"
meta-ti-bsp/conf/machine/beagleplay.conf:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/dra7xx-hs-evm.conf:OPTEEMACHINE = "ti-dra7xx"
meta-ti-bsp/conf/machine/include/am62axx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am62pxx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am62xx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am64xx.inc:OPTEEMACHINE = "k3-am64x"
meta-ti-bsp/conf/machine/include/am65xx.inc:OPTEEMACHINE = "k3-am65x"
meta-ti-bsp/conf/machine/include/j7200.inc:OPTEEMACHINE = "k3-j721e"
meta-ti-bsp/conf/machine/include/j721e.inc:OPTEEMACHINE = "k3-j721e"
meta-ti-bsp/conf/machine/include/j721s2.inc:OPTEEMACHINE = "k3-j784s4"
meta-ti-bsp/conf/machine/include/j722s.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/j784s4.inc:OPTEEMACHINE = "k3-j784s4"
meta-ti uses the OPTEEMACHINE to set optee-os platform [2].
[1] https://github.com/OP-TEE/optee_os/blob/4.0.0/Makefile#L37
[2] https://git.yoctoproject.org/meta-arm/tree/meta-arm/recipes-security/optee/optee-os.inc?h=4.0.3#n23
Suggested-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Codescape mips toolchains are old (2018) and use glibc 2.20 which is not
compatible with 64-bit time_t raising the following build failure with
libselinux since commit 1c2dbcdcf0:
In file included from selinux_restorecon.c:17:0:
/home/buildroot/autobuild/instance-1/output-1/host/mipsel-buildroot-linux-gnu/sysroot/usr/include/fts.h:41:3: error: #error "<fts.h> cannot be used with -D_FILE_OFFSET_BITS==64"
# error "<fts.h> cannot be used with -D_FILE_OFFSET_BITS==64"
^~~~~
Fixes: 1c2dbcdcf0
- http://autobuild.buildroot.org/results/a4d38af627a42a2c55d60129787c51353d5883bf
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
bump to latest version because previous version did not work with python 3.11
Signed-off-by: Jeremy J. Peper <jeremy@jeremypeper.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
bump to latest version because previous version did not work with python 3.11
Signed-off-by: Jeremy J. Peper <jeremy@jeremypeper.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
bump to latest version because previous version did not work with python 3.11
corrected version mismatch with my first submission
Signed-off-by: Jeremy J. Peper <jeremy@jeremypeper.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Without python-gobject, we get the following runtime error:
ModuleNotFoundError: No module named 'gi'
Add python-gobject and propagate its dependencies.
While we're at it, split the DEPENDENCIES over several line and sort
them alphabetically.
Signed-off-by: Jeremy J. Peper <jeremy@jeremypeper.com>
Reviewed-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[Arnout: reorder everything alphabeticall, split DEPENDENCIES over
several lines.]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Bump the kernel version to 6.6.21.
Also pass the nxp/imx/ path due to the devicetree reorganization
in kernel 6.6.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
While fixing a build error
../src/egl/drivers/dri2/platform_x11.c: In function 'dri2_x11_get_msc_rate':
../src/egl/drivers/dri2/platform_x11.c:1229:44:
error: 'struct dri2_egl_display' has no member named 'screen_resources'
with this defconfig:
BR2_x86_64=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_IRIS=y
BR2_PACKAGE_MESA3D_OPENGL_GLX=y
BR2_PACKAGE_MESA3D_OPENGL_EGL=y
BR2_PACKAGE_MESA3D_OPENGL_ES=y
BR2_PACKAGE_XORG7=y
(crocus and i915 drivers are also affected) it turns out that we can
assume the need for dri3 support when X.org is enabled as a hard depen-
dency even if mesa3d's configure does not throw errors when missing,
like for the Intel drivers.
Before this patch these Config.in options were used:
config BR2_PACKAGE_MESA3D_DRI3
select BR2_PACKAGE_XLIB_LIBXSHMFENCE
select BR2_PACKAGE_MESA3D_DRI3 if BR2_PACKAGE_XORG7
which can be translated into:
select BR2_PACKAGE_XLIB_LIBXSHMFENCE if BR2_PACKAGE_XORG7
and used at option BR2_PACKAGE_MESA3D_DRIVER.
Configure option -Ddri3=enabled is passed to mesa3d when at least one
driver is enabled along with X.org:
ifeq ($(BR2_PACKAGE_MESA3D_DRIVER)$(BR2_PACKAGE_XORG7),yy)
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Additionally, add an upstream patch that fixes the configuration for
"NONE" toolchain variant in libspdm. That is, where the build
environment provides compile/link options.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
codesourcery arm/aarch64 toolchains are old (2014) and use glibc
2.18/2.20 which are not compatible with 64-bit time_t raising the
following build failure with libcgroup since commit
1c2dbcdcf0:
In file included from ./libcgroup-internal.h:25:0,
from parse.y:21:
/home/buildroot/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/fts.h:41:3: error: #error "<fts.h> cannot be used with -D_FILE_OFFSET_BITS==64"
# error "<fts.h> cannot be used with -D_FILE_OFFSET_BITS==64"
^
Fixes: 1c2dbcdcf0
- http://autobuild.buildroot.org/results/e28f955f2b360f6e7bb231a5a3800cfbd17a23d7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Peter: add Config.in.legacy entries]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Passing ip=dhcp to the kernel will cause it to try to configure the network
interface using DHCP and wait up to 120s for the interface to detect a link,
slowing down boots without a network cable a lot.
Instead use the "normal" BR2_SYSTEM_DHCP, E.G. trigger ifup to run the DHCP
client in the background.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The kernel build now requires FIT support in mkimage:
ITB arch/mips/boot/vmlinux.gz.itb
/home/peko/source/buildroot/output-ci20/host/bin/mkimage: unsupported type Flat Device Tree
So enable that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable -Werror to fix the following build failure with esp-hosted
raised at least since commit a382a7d554:
In function ‘destroy_cmd_wq’,
inlined from ‘esp_commands_teardown’ at /home/autobuild/autobuild/instance-4/output-1/build/esp-hosted-ce3c50a33fa4bc562a1b6cbcee292c1ae0b0a404/esp_hosted_ng/host/esp_cmd.c:1467:2:
./include/linux/workqueue.h:639:9: error: call to ‘__warn_flushing_systemwide_wq’ declared with attribute warning: Please avoid flushing system-wide workqueues. [-Werror=attribute-warning]
639 | __warn_flushing_systemwide_wq(); \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/autobuild/autobuild/instance-4/output-1/build/esp-hosted-ce3c50a33fa4bc562a1b6cbcee292c1ae0b0a404/esp_hosted_ng/host/esp_cmd.c:408:17: note: in expansion of macro ‘flush_scheduled_work’
408 | flush_scheduled_work();
| ^~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/6ac7a4601938d3296ed1657c06f8cdf433757d73
- http://autobuild.buildroot.org/results/7997cc8a67645a6e1cf4e24d172c6feae459dcfb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following uclibc build failure raised since bump to version
3.506 in commit 57008d384b:
/home/buildroot/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/mipsel-buildroot-linux-uclibc/12.3.0/../../../../mipsel-buildroot-linux-uclibc/bin/ld: iozone_linux-noaio.o: in function `read_perf_test':
iozone.c:(.text+0x11a74): undefined reference to `end_async'
Fixes:
- http://autobuild.buildroot.org/results/31a4f0ac9eeb71df5d2f40ffe9f1f256cb58e399
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Select libucontext if the toolchain doesn't support ucontext to allow
building php on musl
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Do not remove _FILE_OFFSET_BITS=64 from CFLAGS and CPPFLAGS to avoid the
following build failure with BR2_TIME_BITS_64 raised since commit
3c427c6472:
In file included from /home/fabrice/buildroot/output/host/mips-buildroot-linux-gnu/sysroot/usr/include/features.h:394,
from /home/fabrice/buildroot/output/host/mips-buildroot-linux-gnu/sysroot/usr/include/errno.h:25,
from pp.c:20:
/home/fabrice/buildroot/output/host/mips-buildroot-linux-gnu/sysroot/usr/include/features-time64.h:26:5: error: #error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
26 | # error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
| ^~~~~
Indeed, this LFS workaround was there since the addition of the package
in commit cb328f77f8 and is only needed
to fix a build failure with the old codesourcery-arm toolchain from 2014
which uses glibc < 2.23. as glibc 2.23 was released in February 2016:
https://sourceware.org/glibc/wiki/Release/2.23, drop this workaround as
already done for libselinux in commit
c1fa9bc2f7. A follow-up patch will also
drop codesourcery-arm toolchain.
Fixes: 3c427c6472
- No autobuilder failures (yet)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Do not remove _FILE_OFFSET_BITS=64 from CFLAGS and CPPFLAGS to avoid the
following build failure with BR2_TIME_BITS_64 raised since commit
3c427c6472:
In file included from /home/fabrice/buildroot/output/host/mips-buildroot-linux-gnu/sysroot/usr/include/features.h:394,
from /home/fabrice/buildroot/output/host/mips-buildroot-linux-gnu/sysroot/usr/include/fts.h:53,
from restore.h:6,
from restore.c:1:
/home/fabrice/buildroot/output/host/mips-buildroot-linux-gnu/sysroot/usr/include/features-time64.h:26:5: error: #error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
26 | # error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
| ^~~~~
Indeed, this LFS workaround was there since the addititon of the package
in commit 9d6da7a264 and is only needed to
fix a build failure with the old codesourcery-arm toolchain from 2014
which uses glibc < 2.23. as glibc 2.23 was released in February 2016:
https://sourceware.org/glibc/wiki/Release/2.23, drop this workaround as
already done for libselinux in commit
c1fa9bc2f7. A follow-up patch will also
drop codesourcery-arm toolchain.
Fixes: 3c427c6472
- No autobuilder failures (yet)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Do not remove _FILE_OFFSET_BITS=64 from CFLAGS and CPPFLAGS to avoid the
following build failure with BR2_TIME_BITS_64 raised since commit
3c427c6472:
In file included from /home/fabrice/buildroot/output/host/mips-buildroot-linux-gnu/sysroot/usr/include/features.h:394,
from ../include/libcgroup/error.h:9,
from ../include/libcgroup.h:21,
from log.c:15:
/home/fabrice/buildroot/output/host/mips-buildroot-linux-gnu/sysroot/usr/include/features-time64.h:26:5: error: #error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
26 | # error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
| ^~~~~
Indeed, this LFS workaround is there since the addition of the package
in commit ff7191c12e and is only needed to
fix a build failure with the old codesourcery-arm toolchain from 2014
which uses glibc < 2.23. as glibc 2.23 was released in February 2016:
https://sourceware.org/glibc/wiki/Release/2.23, drop this workaround as
already done for libselinux in commit
c1fa9bc2f7. A follow-up patch will also
drop codesourcery-arm toolchain.
Fixes: 3c427c6472
- No autobuilder failures (yet)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2023-52161: The Access Point functionality in
eapol_auth_key_handle in eapol.c in iNet wireless daemon (IWD) before
2.14 allows attackers to gain unauthorized access to a protected Wi-Fi
network. An attacker can complete the EAPOL handshake by skipping Msg2/4
and instead sending Msg4/4 with an all-zero key.
https://git.kernel.org/pub/scm/network/wireless/iwd.git/tree/ChangeLog?h=2.16
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following CVEs:
CVE-2024-24783: crypto/x509: Verify panics on certificates with an unknown public key algorithm
CVE-2023-45290: net/http: memory exhaustion in Request.ParseMultipartForm
CVE-2023-45289: net/http, net/http/cookiejar: incorrect forwarding of sensitive headers and cookies on HTTP redirect
CVE-2024-24785: html/template: errors returned from MarshalJSON methods may break template escaping
CVE-2024-24784: net/mail: comments in display names are incorrectly handled
https://go.dev/doc/devel/release#go1.21.8
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Do not remove _FILE_OFFSET_BITS=64 from CFLAGS and CPPFLAGS to avoid the
following build failure with BR2_TIME_BITS_64 raised since commit
3c427c6472:
configure:5239: /home/autobuild/autobuild/instance-1/output-1/host/bin/mips-buildroot-linux-gnu-gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_TIME_BITS=64 -Os -g2 -I/home/autobuild/autobuild/instance-1/output-1/host/bin/../mips-buildroot-linux-gnu/sysroot/usr/include/tirpc -fno-builtin -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_TIME_BITS=64 conftest.c >&5
In file included from /home/autobuild/autobuild/instance-1/output-1/host/mips-buildroot-linux-gnu/sysroot/usr/include/features.h:394,
from /home/autobuild/autobuild/instance-1/output-1/host/mips-buildroot-linux-gnu/sysroot/usr/include/bits/libc-header-start.h:33,
from /home/autobuild/autobuild/instance-1/output-1/host/mips-buildroot-linux-gnu/sysroot/usr/include/limits.h:26,
from /home/autobuild/autobuild/instance-1/output-1/host/lib/gcc/mips-buildroot-linux-gnu/13.2.0/include/limits.h:205,
from /home/autobuild/autobuild/instance-1/output-1/host/lib/gcc/mips-buildroot-linux-gnu/13.2.0/include/syslimits.h:7,
from /home/autobuild/autobuild/instance-1/output-1/host/lib/gcc/mips-buildroot-linux-gnu/13.2.0/include/limits.h:34,
from conftest.c:12:
/home/autobuild/autobuild/instance-1/output-1/host/mips-buildroot-linux-gnu/sysroot/usr/include/features-time64.h:26:5: error: #error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
26 | # error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
| ^~~~~
[...]
checking for /home/autobuild/autobuild/instance-1/output-1/host/bin/mips-buildroot-linux-gnu-gcc options needed to detect all undeclared functions... cannot detect
configure: error: in `/home/autobuild/autobuild/instance-1/output-1/build/ltp-testsuite-20240129':
configure: error: cannot make /home/autobuild/autobuild/instance-1/output-1/host/bin/mips-buildroot-linux-gnu-gcc report undeclared builtins
Indeed, this LFS workaround was added by commit
ca3524ba70 and is only needed to fix a
build failure with the old codesourcery-arm toolchain from 2014 which
uses glibc < 2.23. as glibc 2.23 was released in February 2016:
https://sourceware.org/glibc/wiki/Release/2.23, drop this workaround as
already done for libselinux in commit
c1fa9bc2f7. A follow-up patch will also
drop codesourcery-arm toolchain.
Fixes:
- http://autobuild.buildroot.org/results/d2e75a79bc42b6a9a2b407fd557aca5c7f207d84
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
poco can't be built statically since commit
073a89196a. However, commit
add7c433d2 enabled static (and shared)
build with BR2_SHARED_STATIC_LIBS resulting in the following build
failure since at least version 1.11.1:
/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/mips-buildroot-linux-gnu/11.2.0/../../../../mips-buildroot-linux-gnu/bin/ld: /home/buildroot/autobuild/instance-1/output-1/build/poco-1.11.1/lib/Linux/mips/libPocoXML.a(ParserEngine.o): in function `Poco::XML::ParserEngine::handleStartElement(void*, char const*, char const**)':
ParserEngine.cpp:(.text+0x2f8): undefined reference to `XML_GetSpecifiedAttributeCount'
Fixes: add7c433d2
- http://autobuild.buildroot.org/results/afc434a13d5e7a8affa4abb4058d7bebc81aca29
- http://autobuild.buildroot.org/results/860b70a8c9c4a6a53247ac4bdb4fd0851b28c61a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with gcc 4.8 raised since the addition
of the package in commit 928b7219cd:
../src/hawkbit-client.c:873:17: error: 'for' loop initial declarations are only allowed in C99 mode
for (const gint *code = &resumable_codes[0]; *code; code++)
^
../src/hawkbit-client.c:873:17: note: use option -std=c99 or -std=gnu99 to compile your code
Fixes: 928b7219cd
- http://autobuild.buildroot.org/results/e275d0ec4fe1da418a6163b46666316034b83b19
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Do not remove _FILE_OFFSET_BITS=64 from CFLAGS to avoid the following
build failure with BR2_TIME_BITS_64 raised since commit
3c427c6472:
In file included from /home/thomas/autobuild/instance-1/output-1/host/microblaze-buildroot-linux-gnu/sysroot/usr/include/features.h:394,
from /home/thomas/autobuild/instance-1/output-1/host/microblaze-buildroot-linux-gnu/sysroot/usr/include/bits/libc-header-start.h:33,
from /home/thomas/autobuild/instance-1/output-1/host/microblaze-buildroot-linux-gnu/sysroot/usr/include/stdio.h:27,
from /home/thomas/autobuild/instance-1/output-1/build/fluent-bit-2.1.7/tools/xxd-c/xxd-c.c:27:
/home/thomas/autobuild/instance-1/output-1/host/microblaze-buildroot-linux-gnu/sysroot/usr/include/features-time64.h:26:5: error: #error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
26 | # error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
| ^~~~~
Indeed, this LFS workaround was present since the addition of the
package in commit 6a0f7c39bc and is
only needed to fix a build failure with the old codesourcery-arm
toolchain from 2014 which uses glibc < 2.23. as glibc 2.23 was released
in February 2016: https://sourceware.org/glibc/wiki/Release/2.23, drop
this workaround as already done for libselinux in commit
c1fa9bc2f7. A follow-up patch will also
drop codesourcery-arm toolchain.
Fixes: 3c427c6472
- http://autobuild.buildroot.org/results/ff5c60cd038550453ce138fe2a9383af2f5d6f2f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While building the rust toolchain, the build system ends up using
cargo (from [...]/output/build/host-rust-bin-1.74.1/cargo/bin/cargo)
to build some tools like rustdoc-tool.
But the host-rust package doesn't use the cargo infractructure (since
it provides cargo binary) and our cargo environment variables [1] are
not set to crosscompile cargo packages in the rust toolchain.
For exemple, we usually set RUSTFLAGS="-C link-arg=-Wl,-rpath,$(HOST_DIR)/lib"
to force cargo using libraries provided by Buildroot in $(HOST_DIR)/lib.
RUSTFLAGS is actually needed to find zlib library (host-zlib) to link
rustdoc-tool when zlib is not installed on the host.
Add $(HOST_PKG_CARGO_ENV) in HOST_RUST_BUILD_CMDS since it already
includes RUSTFLAGS but also CARGO_HOME.
Fixes:
error: could not compile `rustdoc-tool` (bin "rustdoc_tool_binary") due to previous error
[1] https://gitlab.com/buildroot.org/buildroot/-/blob/2024.02-rc1/package/pkg-cargo.mk#L165
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now that oracle-mysql is dropped there isn't any need for the mysql virtual
package.
Adjust the other packages to directly use the mariadb symbols.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The package has not seen any updates for ~10 years, E.G. latest version
bump was in commit 42c56751fc (mysql: bump to version 5.1.73) and the
version contains multiple known vulnerabilities, so drop the package.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following static build failure raised since the addition of the
package in commit 0a01085abe:
[ 26%] Linking CXX shared library libSPIRV-Tools-shared.so
/home/autobuild/autobuild/instance-11/output-1/host/lib/gcc/xtensa-buildroot-linux-uclibc/12.3.0/../../../../xtensa-buildroot-linux-uclibc/bin/ld: /home/autobuild/autobuild/instance-11/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/lib/libc.a(__uClibc_main.os): in function `__uClibc_init':
__uClibc_main.c:(.text+0x98): undefined reference to `__fini_array_start'
Fixes: 0a01085abe
- http://autobuild.buildroot.org/results/f953d500830e8124c6e85c57887106f9352cb4c2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libressl dropped engine support since version 3.8.1 resulting in the
following build failure since bump of libressl to version 3.8.2 in
commit 21eca49ed5:
/home/autobuild/autobuild/instance-0/output-1/host/lib/gcc/armeb-buildroot-linux-gnueabi/12.3.0/../../../../armeb-buildroot-linux-gnueabi/bin/ld: ../library/librdkafka.a(rdkafka_admin.c.o): in function `rd_kafka_UserScramCredentialUpsertion_new':
/home/autobuild/autobuild/instance-0/output-1/build/fluent-bit-2.2.2/lib/librdkafka-2.3.0/src/rdkafka_admin.c:5909: undefined reference to `RAND_priv_bytes'
/home/autobuild/autobuild/instance-0/output-1/host/lib/gcc/armeb-buildroot-linux-gnueabi/12.3.0/../../../../armeb-buildroot-linux-gnueabi/bin/ld: ../library/librdkafka.a(rdkafka_ssl.c.o): in function `rd_kafka_ssl_set_certs':
/home/autobuild/autobuild/instance-0/output-1/build/fluent-bit-2.2.2/lib/librdkafka-2.3.0/src/rdkafka_ssl.c:1384: undefined reference to `ENGINE_load_ssl_client_cert'
Fixes:
- http://autobuild.buildroot.org/results/dd74eb4e31e0e4d23e7638cff47c6876fda59952
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For release note since version 38, see [1].
This commit introduces changes in package patches:
- 0001: Patch dropped. An similar change is included in this release.
See [2].
- 0002: Patch no longer needed since the package build recipe sets
CFLAGS without -Werror, and the package makefile sets -Werror only
by default. See [3], included since version 38.
- 0003: Rebased on version 39 and renamed to 0001. The patch is also
flagged as "Upstream: Not applicable".
- 0004: Patch dropped. Included in this release. See [4].
This commit also removes all patch entries in ".checkpackageignore"
(since the remaining patch has its "Upstream:" tag).
This version 39 also fixes few build failures. Those can be seen by
running the command "utils/test-pkg -a -p efivar". The first group
of build failures is:
br-arm-basic [28/45]: FAILED
br-i386-pentium4-full [31/45]: FAILED
br-mips64-n64-full [33/45]: FAILED
br-mips64r6-el-hf-glibc [34/45]: FAILED
linaro-aarch64 [38/45]: FAILED
linaro-arm [39/45]: FAILED
Fixes:
/buildroot/host/opt/ext-toolchain/bin/../lib/gcc/aarch64-linux-gnu/7.3.1/../../../../aarch64-linux-gnu/bin/ld: .data not found for insert
collect2: error: ld returned 1 exit status
efivar 38 was using linker scripts, which was not working in all
cases. Those issues are fixed by the upstream commit [5] which
removes the use of this linker script (included in this release).
The "test-pkg -a -p efivar" also caught another kind of build
failures:
br-i386-pentium-mmx-musl [32/45]: FAILED
Fixes:
In file included from efivar.h:18,
from efisec.h:24,
from secdb-dump.c:7:
list.h: In function 'list_sort':
list.h:152:2: warning: implicit declaration of function 'qsort_r'; did you mean 'qsort'? [-Wimplicit-function-declaration]
152 | qsort_r(array, nmemb, sizeof(*array), cmp, state);
| ^~~~~~~
| qsort
Those failures were introduced in commit f24029b561 "package/efivar:
bump to version 38". This is because efivar introduced a usage of the
qsort_r() libc function, in upstream commit [6], first included in
version 38.
Musl libc added the qsort_r() function in upstream commit [7], included in
version v1.2.3 (2022-04-07). So external toolchains including a Musl older
than this version will fail. But given how old this issue is (musql 1.2.3
is included in Buildroot since 2022.05), this issue is ignored.
uClibc-ng external toolchains are also not affected, since it added
the qsort_r() function in commit [8] included since its first version
v1.0.0 (2015-02-02). So there is no need to exclude external uclibc
toolchains.
[1] https://github.com/rhboot/efivar/releases/tag/39
[2] https://github.com/rhboot/efivar/commit/4f3da3dc351d7743d91327e74fcaaa13299eeb39
[3] https://github.com/rhboot/efivar/commit/998f617cec92d526e1fadb745673ceef63fa1483
[4] https://github.com/rhboot/efivar/commit/cece3ffd5be2f8641eb694513f2b73e5eb97ffd3
[5] https://github.com/rhboot/efivar/commit/cfd686de51494d3e34be896a91835657ccab37d4
[6] https://github.com/rhboot/efivar/commit/62afa2aa588fb0a6ff56acdd268b9f3c557028b8
[7] https://git.musl-libc.org/cgit/musl/commit/?id=b76f37fd5625d038141b52184956fb4b7838e9a5
[8] https://gogs.waldemar-brodkorb.de/oss/uclibc-ng/commit/515d54433138596e81267237542bd9168b8cc787
Signed-off-by: Julien Olivain <ju.o@free.fr>
[Peter: drop dependency on !external musl]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
All dependencies are optional, and thus only mentioned in the package
help text.
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
[Arnout:
- add to DEVELOPERS;
- add BSD-3-Clause license for vendored pbPlist.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Do not remove _FILE_OFFSET_BITS=64 from CFLAGS and CPPFLAGS to avoid the
following build failure with BR2_TIME_BITS_64 raised since commit
3c427c6472:
In file included from /home/autobuild/autobuild/instance-9/output-1/per-package/libselinux/host/mipsel-buildroot-linux-gnu/sysroot/usr/include/features.h:394,
from /home/autobuild/autobuild/instance-9/output-1/per-package/libselinux/host/mipsel-buildroot-linux-gnu/sysroot/usr/include/bits/libc-header-start.h:33,
from /home/autobuild/autobuild/instance-9/output-1/per-package/libselinux/host/mipsel-buildroot-linux-gnu/sysroot/usr/include/stdint.h:26,
from /home/autobuild/autobuild/instance-9/output-1/per-package/libselinux/host/lib/gcc/mipsel-buildroot-linux-gnu/12.3.0/include/stdint.h:9,
from ../include/selinux/avc.h:9,
from avc.c:10:
/home/autobuild/autobuild/instance-9/output-1/per-package/libselinux/host/mipsel-buildroot-linux-gnu/sysroot/usr/include/features-time64.h:26:5: error: #error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
26 | # error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
| ^~~~~
This LFS workaround for glibc < 2.23 was added in 2016 by commit
ebcca24c95 and is probably not needed
anymore as glibc 2.23 was released in February 2016:
https://sourceware.org/glibc/wiki/Release/2.23
Fixes:
- http://autobuild.buildroot.org/results/d85c81f87adf3a5945fa369bcec233e6def2ed12
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Fix the following build failure raised since bump to version 1.35 in
commit d4d483451f:
/home/thomas/autobuild/instance-1/output-1/host/lib/gcc/xtensa-buildroot-linux-uclibc/12.3.0/../../../../xtensa-buildroot-linux-uclibc/bin/ld: buffer.o: in function `bufmap_reset':
buffer.c:(.text+0xe8): undefined reference to `libintl_gettext'
Fixes:
- http://autobuild.buildroot.org/results/99b05d4b495b6337c6a48ea5a551a3a84c6d2e6b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
As expected by Peter in [1], the hardcoded 3 seconds for waiting the
RAID array to rebuild are not enough on slow test host runners. This
test already failed at least once for that reason, in [2].
In order to fix those failures, this commit adds extra logic to allow
several attempts, before failing. The timeout is currently set at 10
attempts, waiting 3 seconds between each attempts. To help even more,
those 3 seconds are also scaled with the timeout_multiplier.
Fixes: [2]
[1] https://lists.buildroot.org/pipermail/buildroot/2024-February/685034.html
[2] https://gitlab.com/buildroot.org/buildroot/-/jobs/6137469690
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
As suggested by Thomas Petazzoni in [1], add a comment on
BR2_TOOLCHAIN_HAS_UCONTEXT to specify that this boolean will be set to
true only when a toolchain provides a full featured ucontext
implementation with ucontext_t and {get,make,set}context. As a result,
drop its selection from BR2_TOOLCHAIN_USES_MUSL to fix the following
musl build failure on php:
/home/autobuild/autobuild/instance-8/output-1/host/lib/gcc/m68k-buildroot-linux-musl/12.3.0/../../../../m68k-buildroot-linux-musl/bin/ld: Zend/zend_fibers.o: in function `zend_fiber_init_context':
zend_fibers.c:(.text+0x946): undefined reference to `getcontext'
[1]: https://patchwork.ozlabs.org/project/buildroot/patch/20230516193307.1543455-1-bernd.kuhls@t-online.de/
Fixes:
- http://autobuild.buildroot.org/results/271f9fb8bfa5ba2f74feef81e6b375b54e21cece
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
GNU Octave changed its detection of readline library in [1]. This
commit was first included in version 8.1.0.
GNU Octave was updated to 8.1.0 in Buildroot in commit b36e4b10f3
"package/octave: bump to version 8.1.0".
Since this commit, Octave can fail to find readline automatically in
some specific situations. For example, when host system is Fedora 39
and the host "readline-devel" package is installed (see detailed
explanation below).
Octave is now using a m4 macro from gnulib to detect readline.
See [2].
This macro is calling AC_LIB_LINKFLAGS_BODY([readline]). Note that
this macro will look into $libdir and $includedir by default. See [3].
Buildroot is calling target autotools configure command with
--prefix=/usr and --exec-prefix=/usr arguments. See [4].
Autotools derives libdir='${exec_prefix}/lib' and
includedir='${prefix}/include'.
Finally, gnulib will also search automatically into alternate library
directories (i.e. lib32, lib64). See [5].
All of this will make the configure script searching the readline
library by default (i.e. if the library prefix is not provided) into
the host "/usr/lib", "/usr/lib32" and "/usr/lib64", when configuring
for target.
This issue is not happening on the Buildroot docker reference image,
because the package "libreadline-dev" is not present in this image.
Even if the package "libreadline-dev" is installed on a Debian based
host systems, the issue is still not happening because libraries are
installed in the path "/usr/lib/x86_64-linux-gnu", which is not
searched by gnulib macros.
On host systems which installs libraries into one of the
"/usr/lib{,32,64}" directories, the Octave configuration script will
fail, because it will detect the host library and try to link against
it with target architecture and compilation flags and will fail. Since
the --enable-readline configure option is present, the configuration
script will fail because it cannot find a working readline library.
This can be seen in the octave configuration log, in file:
output/build/octave-8.4.0/config.log
configure:73671: checking for readline
configure:73705: /buildroot/output/host/bin/aarch64-none-linux-gnu-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=1 -pthread -fopenmp -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c -lpthread -lm /usr/lib64/libreadline.so >&5
/buildroot/output/host/opt/ext-toolchain/bin/../lib/gcc/aarch64-none-linux-gnu/13.2.1/../../../../aarch64-none-linux-gnu/bin/ld: /usr/lib64/libreadline.so: error adding symbols: file in wrong format
collect2: error: ld returned 1 exit status
This situation can be reproduced on a Fedora 39 x86_64 host system,
with the "readline-devel" package installed. Note: uninstalling the
"readline-devel" will work around the issue.
The issue can be reproduced with a Buildroot configuration such as:
cat > .config <<EOF
BR2_aarch64=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_OCTAVE=y
BR2_PACKAGE_READLINE=y
EOF
make olddefconfig
make
In order to avoid those host/target readline detection mix-ups, the
readline search prefix need to be explicitly passed during octave
configuration. This commit adds this search prefix to fix this build
issue.
Fixes:
checking for readline... (cached) no
checking for readline/readline.h... (cached) yes
checking for readline/history.h... (cached) yes
configure: WARNING: I need GNU Readline 4.2 or later
configure: error: this is fatal unless you specify --disable-readline
[1] https://github.com/gnu-octave/octave/commit/3645c78658c4c66f2bc346fdbc5c7c77d8d8dd12
[2] https://git.savannah.gnu.org/cgit/gnulib.git/tree/m4/readline.m4?id=2cdc1bafb20b187ad067056e090fcb4396ed9099
[3] https://git.savannah.gnu.org/cgit/gnulib.git/tree/m4/lib-link.m4?id=2cdc1bafb20b187ad067056e090fcb4396ed9099#n190
[4] https://gitlab.com/buildroot.org/buildroot/-/blob/2023.11/package/pkg-autotools.mk#L175
[5] https://git.savannah.gnu.org/cgit/gnulib.git/tree/m4/lib-prefix.m4?id=2cdc1bafb20b187ad067056e090fcb4396ed9099#n276
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Since the ARC-special GCC version was bumped from gcc 10.x to gcc 13.x
in commit 045ab73702 ("toolchain: bump
ARC toolchain components to arc-2023.09-release"), the
BR2_GCC_VERSION_ARC option definition is not entirely correct: it
selects BR2_TOOLCHAIN_GCC_AT_LEAST_10, while it should select
BR2_TOOLCHAIN_GCC_AT_LEAST_13. This commit fixes this.
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 7ea38660e0 confused bigint [1] with
Math::BigInt [2]:
Can't locate bigint.pm in @INC (you may need to install the bigint module) (@INC contains: /home/buildroot/autobuild/instance-1/output-1/build/libopenssl-3.2.1/crypto/chacha/asm/../.. /home/buildroot/autobuild/instance-1/output-1/host/lib/perl /usr/local/lib64/perl5/5.36 /usr/local/share/perl5/5.36 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5) at /home/buildroot/autobuild/instance-1/output-1/build/libopenssl-3.2.1/crypto/chacha/asm/../../perlasm/s390x.pm line 16.
BEGIN failed--compilation aborted at /home/buildroot/autobuild/instance-1/output-1/build/libopenssl-3.2.1/crypto/chacha/asm/../../perlasm/s390x.pm line 16.
[1] https://perldoc.perl.org/bigint
[2] https://perldoc.perl.org/Math::BigInt
Fixes: 7ea38660e0
- http://autobuild.buildroot.org/results/777d86a1e53dc3d6a16c829348673f1c33245a6c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
strace needs headers >= 5.0 and
https://github.com/torvalds/linux/commit/9966a05c7b80f075f2bc7e48dbb108d3f2927234
to avoid the following build failure on musl and aarch64 due to headers
conflict raised at least since bump to version 6.0 in commit
544806bfd8:
In file included from /home/autobuild/autobuild/instance-7/output-1/host/aarch64_be-buildroot-linux-musl/sysroot/usr/include/signal.h:48,
from strace.c:17:
/home/autobuild/autobuild/instance-7/output-1/host/aarch64_be-buildroot-linux-musl/sysroot/usr/include/bits/signal.h:18:16: error: redefinition of 'struct sigcontext'
18 | typedef struct sigcontext {
| ^~~~~~~~~~
In file included from /home/autobuild/autobuild/instance-7/output-1/host/aarch64_be-buildroot-linux-musl/sysroot/usr/include/asm/ptrace.h:26,
from /home/autobuild/autobuild/instance-7/output-1/host/aarch64_be-buildroot-linux-musl/sysroot/usr/include/linux/ptrace.h:107,
from ptrace.h:33,
from strace.c:16:
/home/autobuild/autobuild/instance-7/output-1/host/aarch64_be-buildroot-linux-musl/sysroot/usr/include/asm/sigcontext.h:28:8: note: originally defined here
28 | struct sigcontext {
| ^~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/74a480aa76970b36dcd890d9bd7a9df1d49e8e16
- http://autobuild.buildroot.org/results/79ee8ae5fb9712fd874b56e836eca1b997c50cd9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Peter: fix architecture conditional]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that binutils 2.39 is gone, we can drop
BR2_PACKAGE_BINUTILS_HAS_NO_LIBSFRAME, which was only used for
binutils 2.39. This was a blind option, so Config.in.legacy handling
is not needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now that we have integrated support for binutils 2.42, and made
binutils 2.41 the default, following our tradition, we can drop
support for binutils 2.39.
In addition to the usual things, there is an additional minor change
in elf2flt.mk, which had a special condition applicable to binutils
2.39 or 2.40, which can be simplified to only apply to binutils 2.40
now.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As Thomas stated in 3bb260cf38:
The br-arm-internal-glibc.config is generally used as a configuration
to test the bleeding edge versions of components. However, it has been
lagging behind somewhat, so let's bring it up-to-date:
- Binutils 2.42.x
- GCC 13.x
Let the fun begin in the autobuilders!
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now that 2.42 has been introduced, let's make 2.41 the latest version,
following the traditional Buildroot policy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Note that the hash of the tarball does not need to be added, as it was
already added as part of commit 11b439ce1b
("package/binutils-bare-metal: new package").
Our existing 2 patches are simply rebased, with minor conflict
resolution required.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: keep version list in strict version order]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This release adds two new ports: loongarch64 and riscv32. The former
is not supported in Buildroot, but the latter is, so it gets enabled
in this commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
python-setuptools-scm-git-archive is obsolete as
python-setuptools-scm >= 7.0.0 supports Git archives by itself.
Moreover, it raises the following build failure without pip since its
addition in commit 9359325c60:
/nvmedata/autobuild/instance-3/output-1/per-package/host-python-setuptools-scm-git-archive/host/bin/python: No module named pip
Traceback (most recent call last):
File "/nvmedata/autobuild/instance-3/output-1/per-package/host-python-setuptools-scm-git-archive/host/lib/python3.10/site-packages/setuptools/installer.py", line 82, in fetch_build_egg
subprocess.check_call(cmd)
File "/nvmedata/autobuild/instance-3/output-1/per-package/host-python-setuptools-scm-git-archive/host/lib/python3.10/subprocess.py", line 369, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['/nvmedata/autobuild/instance-3/output-1/per-package/host-python-setuptools-scm-git-archive/host/bin/python', '-m', 'pip', '--disable-pip-version-check', 'wheel', '--no-deps', '-w', '/tmp/tmpaxobatcs', '--quiet', 'typing-extensions']' returned non-zero exit status 1.
Fixes:
- http://autobuild.buildroot.org/results/d05e412170c427e4f210da164c783b3527f15892
- http://autobuild.buildroot.org/results/50f80cfabccbe5c75cd889ce6af2b418e376d4e5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Group _CONF_{ENV,OPTS} together after the autreconf ones.
Keep AUTORECONF=YES close to AUTORECONF_OPTS
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
host-rust package depends on several host packages to provide tools and
libraries but it doesn't take into account out host libraries in
HOST_DIR while building rustc compiler. Indeed, rustc needs zlib and
fails to link if zlib is not installed on the host.
error: could not compile `rustc_driver` (lib) due to previous error
If zlib is installed on the host, we can notice it with ldd tool (while
it should be linked with the one provided by Buildroot host-zlib):
ldd [...]TestRust/host/bin/rustc
libz.so.1 => /lib64/libz.so.1
Provide HOST_LDFLAGS using llvm.ldflags in config.toml.
(HOST_LDFLAGS provides -L$(HOST_DIR)/lib -Wl,-rpath,$(HOST_DIR)/lib)
With that fixed, rustc_driver link with libz from HOST_DIR but the
host-rust build still fail later due to another issue.
error: could not compile `rustdoc-tool` (bin "rustdoc_tool_binary") due to previous error
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6256881545http://autobuild.buildroot.org/results/a6b/a6b28783f29e6b729824bf42679a62f72ad5bee0
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[yann.morin.1998@free.fr: slight rewording in commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Several rust tools are linking against zlib, so add the depedency
explicitly in HOST_RUST_DEPENDENCIES.
For now, host-rust build system is not able to find zlib provided
by Buildroot in HOST_DIR due to at least two issues that will be
fixed in followup commits.
Note that host-zlib is already in the dependency chain, by way of
host-openssl, but since rust needs for itself, we need to add it
as an explicit dependency.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[yann.morin.1998@free.fr: add not about transitive dependency]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 722b84eafa forgot to update
nginx-naxsi resulting in the following build failure:
In file included from ../nginx-naxsi-d714f1636ea49a9a9f4f06dba14aee003e970834/naxsi_src/naxsi_runtime.c:7:
../nginx-naxsi-d714f1636ea49a9a9f4f06dba14aee003e970834/naxsi_src/naxsi.h:147:3: error: unknown type name 'ngx_regex_compile_t'
147 | ngx_regex_compile_t* target_rx;
| ^~~~~~~~~~~~~~~~~~~
Fixes: 722b84eafa
- http://autobuild.buildroot.org/results/87bbcf946ccbd8e3bf1ca9f39464f4bb198c8d42
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised since the addition of the package
in commit ea45b95c0e:
In file included from third_party/boringssl-with-bazel/src/include/openssl/base.h:78,
from third_party/boringssl-with-bazel/src/include/openssl/ssl.h:145,
from ./src/core/tsi/ssl/key_logging/ssl_key_logging.h:23,
from ./src/core/lib/security/security_connector/ssl_utils.h:42,
from ./src/core/lib/security/credentials/tls/grpc_tls_certificate_distributor.h:36,
from ./src/core/ext/xds/certificate_provider_store.h:44,
from src/core/ext/xds/certificate_provider_store.cc:21:
third_party/boringssl-with-bazel/src/include/openssl/target.h:62:2: error: #error "Unknown target CPU"
62 | #error "Unknown target CPU"
| ^~~~~
Fixes: ea45b95c0e
- http://autobuild.buildroot.org/results/36686aca1b45f0bf692a60e67a48424b561930a3
- http://autobuild.buildroot.org/results/4f79c7b1b2fc3306f300ae3ec0aa4439725814c1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A vulnerability was found in obgm libcoap 4.3.4. It has been rated as
critical. Affected by this issue is the function get_split_entry of the
file src/coap_oscore.c of the component Configuration File Handler. The
manipulation leads to stack-based buffer overflow. The attack may be
launched remotely. The exploit has been disclosed to the public and may
be used. It is recommended to apply a patch to fix this issue.
VDB-252206 is the identifier assigned to this vulnerability.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2024-25062: An issue was discovered in libxml2 before 2.11.7 and
2.12.x before 2.12.5. When using the XML Reader interface with DTD
validation and XInclude expansion enabled, processing crafted XML
documents can lead to an xmlValidatePopElement use-after-free.
https://gitlab.gnome.org/GNOME/libxml2/-/blob/v2.12.5/NEWS
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Hash of COPYING.NEWLIB is wrong since the addition of the package in
commit 3b95ff658b:
ERROR: COPYING.NEWLIB has wrong sha256 hash:
ERROR: expected: 422aa40293093fb54fc66e692a0d68fd0b24ed5602e5d1d33ad05ba3909057e9
ERROR: got : 9a59b4ee3af067045fe0ea78786201c42d54756fe48cbccf44f3dfc398474717
Fixes: 3b95ff658b
- No autobuilder failures (yet)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure without makeinfo raised since the
addition of the package in commit
3b95ff658b:
make[5]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/newlib-bare-metal-4.4.0/microblazeel-xilinx-elf/libgloss'
MAKEINFO ../.././libgloss/doc/porting.info
/home/buildroot/autobuild/instance-2/output-1/build/newlib-bare-metal-4.4.0/missing: line 81: makeinfo: command not found
Fixes: 3b95ff658b
- http://autobuild.buildroot.org/results/23e6641cbce62258310c300f8aed5d6a76973d72
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit b7232c51dd added default setting
for bare-metal toolchain arch but unfortunately it used configlines.add
instead of configlines.append resulting in the following build failure:
/bin/sh: line 8: /home/autobuild/autobuild/instance-1/output-1/per-package/host-gcc-bare-metal/host/bin/-ar: No such file or directory
While at it, also append /n for consistency
Fixes: b7232c51dd
- http://autobuild.buildroot.org/results/95ac565653ddb5c14ec71470c32a34ad10b048cb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 22b6945552 (support/scripts/cve.py: switch from NVD to FKIE for
the JSON files) had to change the decompressor from gz to xz, as the new
location is using xz compression.
That commit mentioned that it was spawning an external xz process to do
the decompression, on the pretence that "there is no xz decompressor in
Python stdlib."
Before version 3.1, ijson.items() only accepted a file-like object as
input (that file-like object could yield bytes() or str(), both were
supported). Starting with version 3.1, ijson.items() also accepts that
it be directly passed bytes() or str() directly. subprocess.check_output()
means we are now passing bytes() to ijson.items(), so it fails on ijson
versions before 3.1, with failures such as:
[...]
File "/usr/lib/python3/dist-packages/ijson/backends/python.py", line 25, in Lexer
if type(f.read(0)) == bytetype:
AttributeError: 'bytes' object has no attribute 'read'
Ubuntu 20.04, on which the pkg-stats run to generate the daily report,
only has ijson 2.3. More recent distros have more recent versions of
ijson, like Fedora 39 that has 3.2.3, recent enough to support being fed
bytes(). Commit 22b6945552 was tested on Fedora 39, so did not catch
the issue.
However, the reasoning in 22b6945552 is wrong: there *is* the lzma
module, at least since python 3.3 (that is, aeons ago), which is able to
read xz-compressed files; it also has an API similar to the gzip module,
and can provide a file-like object that exposes the decompressed data.
So, do just that: provide an lzma-wrapped file-like object to ijson, so
that we can eventually recover our daily reports that everything is
broken! :-]
Note that this construct still works on recent versions!
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libheif raises the following build failure with libjpeg since bump to
version 1.17.5 in commit 5714126eda and
https://github.com/strukturag/libheif/commit/ebd13a20b8b7f1964939642b08b662ef7e483f39
/home/buildroot/autobuild/instance-3/output-1/build/libheif-1.17.5/libheif/plugins/encoder_jpeg.cc: In function 'heif_error jpeg_encode_image(void*, const heif_image*, heif_image_input_class)':
/home/buildroot/autobuild/instance-3/output-1/build/libheif-1.17.5/libheif/plugins/encoder_jpeg.cc:366:37: error: invalid conversion from 'long unsigned int*' to 'size_t*' {aka 'unsigned int*'} [-fpermissive]
366 | jpeg_mem_dest(&cinfo, &outbuffer, &outlength);
| ^~~~~~~~~~
| |
| long unsigned int*
Fixes:
- http://autobuild.buildroot.org/results/8ca909564c8dabe28ad08c96ebbc04b25592e727
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit f71d9f49e5 (support/scripts/pkg-stats: fix datetime deprecation
warning) forgot to consider that the datetime.UTC suggested by python
3.12, was only introduced with python 3.11.
However, we are still generating the daily report on a python 3.8
version, which fails at runtime:
AttributeError: module 'datetime' has no attribute 'UTC'
It turns out that datetime.UTC is just an alias for datetime.timezone.utc,
which seems to have existed since before python3...
Use datetime.timezone.utc instead of its alias.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While the old NVD JSON feed provided data files where the CVEs were
sorted by ID, the new feed from FKIE does not have sorted CVEs.
Add a method to sort a list of CVE IDs (i.e. CVE ID strings, not CVE
objects!), and use that when emiting the HTML output.
The JSON output need not be sorted, because it is supposed to be used
for post-processing, and we do not care about the ordering there; a
consumer interested in sorting should sort on their side.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit 22b6945552 (support/scripts/cve.py: switch from NVD to FKIE for
the JSON files) missed the fact that the layout of the FKIE data files
are different from the original NVD ones. They are formatted according
to the NVD v2 API.
Most differences are relatively trivial fields renaming, and those are
easily spotted in this patch.
There is however one key difference in the layout of the configurations.
Where the NVD had "configurations" as an object with a "nodes" key, the
FKIE has a "configurations" as a list of objects with a single "nodes"
key; i.e. it is one-level deeper.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Abide by the warning reported with python 3.12:
.../support/scripts/pkg-stats:1289: DeprecationWarning:
datetime.datetime.utcnow() is deprecated and scheduled for removal
in a future version. Use timezone-aware objects to represent
datetimes in UTC: datetime.datetime.now(datetime.UTC).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit 2c5a82a29c (package/openssh: select linux-pam if refpolicy
upstream is selected) did not account for the linux-pam dependencies
before selecting it, causing unmet dependencies warnings (unfortunately,
not errors), such as:
$ KCONFIG_SEED=0xCF227CF4 make randconfig
WARNING: unmet direct dependencies detected for BR2_PACKAGE_LINUX_PAM
Depends on [n]: BR2_ENABLE_LOCALE [=n] && BR2_USE_WCHAR [=n] && !BR2_STATIC_LIBS [=n] && BR2_USE_MMU [=y] && BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 [=y]
Selected by [y]:
- BR2_PACKAGE_OPENSSH [=y] && BR2_USE_MMU [=y] && BR2_PACKAGE_REFPOLICY_UPSTREAM_VERSION [=y]
2c5a82a29c made the choice of having openssl bear the responsibility
to select linux-pam when the upstream refpolicy version was enabled.
Semantically however, the responsibility really lies within refpolicy
itself, since that's what imposes linux-pam to openssh.
Move the select to refpolicy and drop it from openssh. Then, ensure that
linux-pam is only selected when it is available.
That means that one may get an openssh that is not linked against
linux-pam, when the linux-pam dependencies are not met; refpolicy (by
way of libsepol) also has a more stringent requirement on gcc version
than linux-pam, so most probably the missing dependencies would be
locale, wchar, or a static build. We consider that situation to be a
corner case that we do not want to address.
In the future, we may have more similar situations, whereby refpolicy
would impose other packages be linked with otherwise optional
dependencies. If (when) that were (will be) the case, then the proposed
mechanism would quickly become ugly; we could then re-assess a nicer way
to do that. Until then, this is good ebough.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Adam Duskett <adam.duskett@amarulasolutions.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, when the version string is "too long", it is arbitrarily
truncated.
This works well for commit hashes, because usually the truncation is
long enough to provide a short hash that is still unique in the
upstream VCS.
However, there are non-hash-like versions strings that get truncated
and wihch the discriminant part is toward the end.
Yet, adapting the version cell to the widest versions string (most
probably a git hash) is not very interesting; the table is already very
large.
Make the cell with the version string scrollable: we get to keep the
best of both worlds: a narrow version cell, and a full-length version
string that can be copy-pasted if needed.
Signed-off-by: Sen Hastings <sen@hastings.org>
[yann.morin.1998@free.fr: reword commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following static build failure with libpsl raised since bump to
version 8.6.0 in commit 5cee6b6be6:
configure:28830: /home/autobuild/autobuild/instance-6/output-1/host/bin/aarch64_be-buildroot-linux-musl-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -static -Werror-implicit-function-declaration -Wno-system-headers -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I/home/autobuild/autobuild/instance-6/output-1/host/aarch64_be-buildroot-linux-musl/sysroot/usr/include -static -L/home/autobuild/autobuild/instance-6/output-1/host/bin/../aarch64_be-buildroot-linux-musl/sysroot/usr/lib -L/home/autobuild/autobuild/instance-6/output-1/host/aarch64_be-buildroot-linux-musl/sysroot/usr/lib conftest.c -lpsl -lmbedtls -lmbedx509 -lmbedcrypto -lz -latomic >&5
/home/autobuild/autobuild/instance-6/output-1/host/lib/gcc/aarch64_be-buildroot-linux-musl/11.4.0/../../../../aarch64_be-buildroot-linux-musl/bin/ld: /home/autobuild/autobuild/instance-6/output-1/host/bin/../aarch64_be-buildroot-linux-musl/sysroot/usr/lib/libpsl.a(psl.c.o): in function `is_public_suffix':
psl.c:(.text+0x2a8): undefined reference to `idn2_lookup_u8'
[...]
checking for library containing psl_builtin... no
configure: error: libpsl was not found
Fixes: 5cee6b6be6
- http://autobuild.buildroot.org/results/1fb15e1a99472c403d0d3b1a688902f32e78d002
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When selecting barebox in menuconfig, BR2_TARGET_BAREBOX_IMAGE_FILE will
be empty by default, which causes Buildroot to install whatever the
barebox-flash-image symlink points at for barebox versions >= v2012.10.0.
This is an outdated fallback, because barebox-flash-image is only valid
when the barebox build produces a single binary. Virtually all new
defconfigs added in the last couple of years are multiconfig
(CONFIG_PBL_IMAGE=y) however, meaning that a single imx_v7_defconfig
or multi_v8_defconfig will produce many images that support different
boards or even platforms.
As there is no single valid target for barebox-flash-image to point at
in this case, this symlink will point at a non-existing
'multi-image-build' to alert the user to this fact.
As replacement for barebox-flash-image, barebox commit 550cf79c216a
("Make list of flash images and fix link all single image cases") first
released with v2015.12.0 creates a barebox-flash-images file with a list
of all images built by barebox.
Have buildroot use that file as a fallback before trying
barebox-flash-image to have a fallback that works for any recent barebox
defconfig as well.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
tio needs threads since version 2.4 and
https://github.com/tio/tio/commit/93e6efc00153e625e4ceb8a51e01b324247d312a
resulting in the following build failure since bump to version 2.7 in
commit 4b33d7a47d:
In file included from /home/autobuild/autobuild/instance-7/output-1/host/riscv64-buildroot-linux-uclibc/sysroot/usr/include/stdio.h:27,
from ../src/tty.c:23:
/home/autobuild/autobuild/instance-7/output-1/host/riscv64-buildroot-linux-uclibc/sysroot/usr/include/features.h:218:5: warning: #warning requested reentrant code, but thread support was disabled [-Wcpp]
218 | # warning requested reentrant code, but thread support was disabled
| ^~~~~~~
../src/tty.c:43:10: fatal error: pthread.h: No such file or directory
43 | #include <pthread.h>
| ^~~~~~~~~~~
Fixes: 4b33d7a47d
- http://autobuild.buildroot.org/results/9b20ff06a0ad24b7e7f4750ebe64e2077e36164a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 36e635d2d5.
Python 3.12 is still causing too many build failures, so revert for 2024.02.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 687b96db4d.
Python 3.12 is still causing too many build failures, so revert for 2024.02.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Shortly before GCC 10.4.0 was dropped in d37a8f3a2, commit 4ce0dacb6 was
merged and introduced a patch to 10.4.0 that was not accounted for by
the patch that dropped 10.4.0 support.
Fixes: d37a8f3a2 ("package/gcc: remove gcc 10.x")
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit b9e89b340e (sudo: bump version) introduced the explicit build
of mksigname and mksiglist as host tools, as they were required to run
on the build machine, to generate C code then used to build the target
program.
This is now failing to build since the bump to sudo 1.9.15p5 in commit
c87746afef (package/sudo: security bump to version 1.9.15p5)
(lines manually wrapped and slightly elided for ease of reviewing):
/usr/bin/cpp \
-I/home/ymorin/dev/buildroot/O/master/per-package/sudo/host/include \
-I../../include \
-I../.. \
./sys_signame.h \
| /usr/bin/sed -e '1,/^int sudo_end_of_headers;/d' -e '/^#/d' > mksigname.h
In file included from /usr/include/features.h:394,
from /usr/include/sys/types.h:25,
from ./sys_signame.h:4:
/usr/include/features-time64.h:26:5: error: #error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
26 | # error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
| ^~~~~
/usr/bin/gcc -I../../include -I../.. -I. -I. \
-D_PATH_SUDO_CONF=\"/etc/sudo.conf\"
-I/home/ymorin/dev/buildroot/O/master/per-package/sudo/host/include \
-DDEFAULT_TEXT_DOMAIN=\"sudo\" \
-O2 \
-I/home/ymorin/dev/buildroot/O/master/per-package/sudo/host/include \
./mksigname.c -o mksigname
In file included from /usr/include/features.h:394,
from /usr/include/bits/libc-header-start.h:33,
from /usr/include/stdlib.h:26,
from ./mksigname.c:27:
/usr/include/features-time64.h:26:5: error: #error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
26 | # error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
| ^~~~~
make[2]: *** [Makefile:263: mksigname] Error 1
The core of the issue has not been really identified, but it turns out
that neither mksiglist nor mksignames is used during the build. This has
been tested with a minimal sudo with no option, and with a sudo with all
options enabled (linux-pam, zlib, opensldap, and openssl), with the
three types of C libraries (glibc, musl, and uClibc-ng).
Digging in the sudo buildsystem did not reveal an obvious reason when
those would be needed either.
Drop the hook now it seems it is no longer used and is atually breaking
the build.
Fixes: http://autobuild.buildroot.org/results/72f/72ff18fb9b41394a29006f881ee1fbea67a66a09/
Note that there is a second issue in there: the call to the host cpp
fails, but since it is on the LHS of a pipe, the error is lost, as the
RHS of the pipe (the sed call) succeeds; a fix for that will be sent
in a separate patch.
Reported-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Christian Stewart <christian@aperture.us>
Fixes the following security issues:
CVE-2023-40546 mok: fix LogError() invocation
CVE-2023-40547 - avoid incorrectly trusting HTTP headers
CVE-2023-40548 Fix integer overflow on SBAT section size on 32-bit system
CVE-2023-40549 Authenticode: verify that the signature header is in bounds.
CVE-2023-40550 pe: Fix an out-of-bound read in verify_buffer_sbat()
CVE-2023-40551: pe-relocate: Fix bounds check for MZ binaries
https://github.com/rhboot/shim/tree/15.8
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update patch to compile correctly with newer versions of GCC, which
has gotten stricter about the placement of the alignas() attribute.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[yann.morin.1998@free.fr: update .checkpackageignore]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following security issues:
https://wpewebkit.org/security/WSA-2024-0001.html
- CVE-2024-23222: Processing maliciously crafted web content may lead to
arbitrary code execution. Apple is aware of a report that this issue
may have been exploited. Description: A type confusion issue was
addressed with improved checks.
- CVE-2024-23206: A maliciously crafted webpage may be able to
fingerprint the user. Description: An access issue was addressed with
improved access restrictions.
- CVE-2024-23213: Processing web content may lead to arbitrary code
execution. Description: The issue was addressed with improved memory
handling.
Add an upstream post-2.42.5 patch to fix an issue with an invalid
backport causing a build issue.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Release notes from https://github.com/libts/tslib/releases :
This release includes libts version 0.10.5 and the following changes:
* new filter module: module crop
* some build and security fixes
* improved release procedure
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of waiting for a hardcoded time of 30s we check periodically every
second if the server is already up. If it isn't up after the full timeout
(which is the same as before) expired the test fails.
We need to redirect all output of the background started task to
/dev/null now as it otherwise confuses the emulator.run() exit code
parsing logic (as it gets out of order messages from the emulator).
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
yann.morin.1998@free.fr: simplify assert test]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Move comment in Config.in to end of file so that
BR2_PACKAGE_GOOGLE_BREAKPAD_TOOLS is properly idented.
Signed-off-by: Nuno Gonçalves <nunog@fr24.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
uClibc lacks process_vm_readv(), and sudo fails to build since commit
c87746afef (package/sudo: security bump to version 1.9.15p5), with
errors such as:
./exec_ptrace.c: In function ‘ptrace_write_vec’:
./exec_ptrace.c:895:9: error: ‘nwritten’ undeclared (first use in this function); did you mean ‘pwrite’?
895 | nwritten = ptrace_write_string(pid, strtab, vec[i]);
| ^~~~~~~~
| pwrite
Backport an upstream commit to fix the issue.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit c05f27c "configs/freescale_imx93evk: new defconfig", when
applied, added few ShellCheck fixups on top of the orginial
submission. During those changes, one extra backslash was added,
making the imx9-bootloader-prepare.sh fail.
This commit fixes the issue by removing this extra backslash.
Fixes:
dd: failed to open '/buildroot/output/images/u-boot-atf-container.img': No such file or directory
make: *** [Makefile:820: target-post-image] Error 1
Signed-off-by: Julien Olivain <ju.o@free.fr>
Reviewed-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Tested-By: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
$ utils/docker-run make check-package
board/freescale/imx93evk/patches/linux-headers/linux-headers.hash:3: empty line at end of file
board/freescale/imx93evk/patches/linux/linux.hash:3: empty line at end of file
402624 lines processed
2 warnings generated
make: *** [Makefile:1248: check-package] Error 1
Signed-off-by: Kadambini Nema <kadambini.nema@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The dependency comment must be shown when the platform has no ELE and
not when the platform has no VPU.
Fixes: 69d127fe29 ("package/freescale-imx/firmware-ele-imx: new package")
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Fix the following openssl static build raised since commit
80fa5672da:
/home/buildroot/autobuild/instance-0/output-1/host/lib/gcc/aarch64_be-buildroot-linux-uclibc/12.3.0/../../../../aarch64_be-buildroot-linux-uclibc/bin/ld: /home/buildroot/autobuild/instance-0/output-1/host/aarch64_be-buildroot-linux-uclibc/sysroot/lib/../lib64/libcrypto.a(libcrypto-lib-c_zlib.o): in function `zlib_oneshot_expand_block':
c_zlib.c:(.text+0xaec): undefined reference to `uncompress'
Commit b9a062b354 can also be reverted as
pkg-config will also retrieve -latomic to avoid the following build
failure:
/home/autobuild/autobuild/instance-1/output-1/host/lib/gcc/sparc-buildroot-linux-uclibc/10.4.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: /home/autobuild/autobuild/instance-1/output-1/host/sparc-buildroot-linux-uclibc/sysroot/usr/lib/libcrypto.a(threads_pthread.o): in function `CRYPTO_atomic_add':
threads_pthread.c:(.text+0x208): undefined reference to `__atomic_is_lock_free'
RSYNC_POST_CONFIGURE_HOOKS must be added to call reconfigure and avoid
the following build failure after autoreconf:
autoconf -o configure.sh
autoheader && touch config.h.in
configure.sh has CHANGED.
config.h.in is unchanged.
You may need to run:
make reconfigure
Fixes:
- http://autobuild.buildroot.org/results/6c1636f7556e7370a4c9f6d02c63cf3e20dc985c
- http://autobuild.buildroot.org/results/49abbaa1eab94b248bff434b40728065d687e278
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Disable neon with soft float to fix the following build failure raised
at least since version 2.19.1:
In file included from build/include/botan/internal/simd_32.h:27,
from src/lib/block/aes/aes_vperm/aes_vperm.cpp:15:
/home/thomas/autobuild/instance-1/output-1/host/lib/gcc/arm-buildroot-linux-musleabi/10.4.0/include/arm_neon.h:31:2: error: #error "NEON intrinsics not available with the soft-float ABI. Please use -mfloat-abi=softfp or -mfloat-abi=hard"
31 | #error "NEON intrinsics not available with the soft-float ABI. Please use -mfloat-abi=softfp or -mfloat-abi=hard"
| ^~~~~
Fixes:
- http://autobuild.buildroot.org/results/6b311e97484db2b0f8adbda140320d696713b1e0
- http://autobuild.buildroot.org/results/c309940ea6db0845d8221fb51611d0254222c644
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update U-Boot to version 2024.01 and kernel to 6.6.12.
In kernel 6.6 the arm32 i.MX device trees were placed into the
nxp/imx kernel directory, so adapt accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package provides firmware blobs for the Edgelock Secure
Enclave (ELE) [1] present on i.MX8ULP and i.MX9 Socs.
This version comes from the 6.1.55-2.2.0 release.
Since i.MX8ULP is not added to Buildroot yet, only support i.MX9.
[1] https://www.nxp.com/products/nxp-product-information/nxp-product-programs/edgelock-secure-enclave:EDGELOCK-SECURE-ENCLAVE
Reviewed-by: Gary Bisson <bisson.gary@gmail.com>
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
[Arnout:
- Introduce BR2_PACKAGE_FREESCALE_IMX_HAS_ELE instead of specific
dependencies.
- Drop BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX91A1, use
BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX91 instead.
- Don't use SCR.txt as license file (it's just an index file); instead,
use EULA.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This commit adds i.MX91 and i.MX93 support to Buildroot.
https://www.nxp.com/products/processors-and-microcontrollers/arm-processors/i-mx-applications-processors/i-mx-9-processors:IMX9-PROCESSORS
There is no i.MX95 software provided by NXP at the moment that's why
i.MX95 is left behind.
Adapt package firmware-imx for the LPPDR4 firmware binaries. The i.MX91
and i.MX93 only support LPDDR4 and LPDDR4x, but using different binaries
than i.MX8. For simplicity, use a completely separate code path for
i.MX91 and i.MX93, using the symbol
BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW_IMX9. There is only one type of
firmware supported, so there's no need for a choice or for selecting the
version (at least for now).
Reviewed-by: Gary Bisson <bisson.gary@gmail.com>
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
[Arnout:
- Remove BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX91A1 option.
- Re-wrap help text.
- Introduce BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW_IMX9 instead of
reusing BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW.
- Create completely separate instance of
FIRMWARE_IMX_INSTALL_IMAGE_DDR_FW for
BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW_IMX9.
- Drop the training binaries choice for IMX9.
- Drop the firmware version option for IMX9.
- Keep options for IMEM and DMEM padding.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Similar to the new fastapi test, instead of waiting for a hard coded
amount of time we can retry every second until the server is available
and abort if after the timeout we still didn't manage to connect.
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following failure in the install step of host-python3:
...
/usr/bin/install -c -m 644 pyconfig.h output/host/include/python3.12/pyconfig.h
[ERROR] _tkinter failed to import: output/build/host-python3-3.12.1/build/lib.linux-x86_64-3.12/_tkinter.cpython-312-x86_64-linux-gnu.so: undefined symbol: Tcl_AddErrorInfo
The following modules are *disabled* in configure script:
_ctypes_test _testbuffer _testcapi
_testclinic _testimportmultiple _testinternalcapi
_testmultiphase _xxtestfuzz xxsubtype
Following modules built successfully but were removed because they could not be imported:
_tkinter
Checked 110 modules (31 built-in, 54 shared, 15 n/a on linux-x86_64, 9 disabled, 0 missing, 1 failed on import)
...
/usr/bin/install -c -m 644 ./Lib/types.py output/host/lib/python3.12
/usr/bin/install: cannot stat 'Modules/_tkinter.cpython-312-x86_64-linux-gnu.so': No such file or directory
/usr/bin/install -c -m 644 ./Lib/typing.py output/host/lib/python3.12
make[3]: *** [Makefile:2068: sharedinstall] Error 1
...
Fixes: 36e635d2d5 ("package/python3: bump version to 3.12.1")
Signed-off-by: Roy Kollen Svendsen <roy.kollen.svendsen@akersolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When the elfutils package was first introduced, it filtered out
LFS-related compiler flags due to issues with the package's
implementation. This package has since evolved over the years to support
LFS (e.g. using `AC_SYS_LARGEFILE` [1]).
Filtering out `-D_FILE_OFFSET_BITS=64` can lead to a configuration error
when `BR2_TIME_BITS_64` is enabled:
checking whether gcc supports -Wl,-z,relro... yes
checking for __thread support... no
configure: error: __thread support required
...
With the configuration log providing the specific reason:
configure:7175: .../output-1/host/bin/m68k-buildroot-linux-gnu-gcc -o conftest -fPIC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_TIME_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_TIME_BITS=64 -shared -Wl,-z,defs -Wl,-z,relro -latomic -Wl,--build-id conftest.c >&5
In file included from .../output-1/host/m68k-buildroot-linux-gnu/sysroot/usr/include/features.h:394,
from .../output-1/host/m68k-buildroot-linux-gnu/sysroot/usr/include/bits/libc-header-start.h:33,
from .../output-1/host/m68k-buildroot-linux-gnu/sysroot/usr/include/stdlib.h:26,
from conftest.c:13:
.../output-1/host/m68k-buildroot-linux-gnu/sysroot/usr/include/features-time64.h:26:5: error: #error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
26 | # error "_TIME_BITS=64 is allowed only with _FILE_OFFSET_BITS=64"
| ^~~~~
configure:7175: $? = 1
...
Fixes:
- http://autobuild.buildroot.org/results/fbfe131673ed78999a07dbc879436e0ef6a8a1c0
[1]: https://sourceware.org/git/?p=elfutils.git;a=commit;h=3425454a10d307fae891fb667cf7969e945cde79
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Switch from distutils to setuptools to avoid the following build failure
raised since bump of python to version 3.12.1 in commit
36e635d2d5:
Traceback (most recent call last):
File "/home/fabrice/buildroot/output/build/libpwquality-1.4.5/python/setup.py", line 9, in <module>
from distutils.core import setup, Extension
ModuleNotFoundError: No module named 'distutils'
Fixes: 36e635d2d5
No autobuilder failures (yet)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with gcc >= 13:
In file included from /home/buildroot/autobuild/instance-3/output-1/build/uhd-4.3.0.0/host/lib/cal/database.cpp:7:
/home/buildroot/autobuild/instance-3/output-1/build/uhd-4.3.0.0/host/include/uhd/cal/database.hpp:86:24: error: 'uint8_t' was not declared in this scope
86 | static std::vector<uint8_t> read_cal_data(const std::string& key,
| ^~~~~~~
/home/buildroot/autobuild/instance-3/output-1/build/uhd-4.3.0.0/host/include/uhd/cal/database.hpp:14:1: note: 'uint8_t' is defined in header '<cstdint>'; did you forget to '#include <cstdint>'?
13 | #include <functional>
+++ |+#include <cstdint>
14 |
Fixes:
- http://autobuild.buildroot.org/results/cc52f2ed4fa43fe9c92713eb8561afcba29e12f3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit c10349bf67 (package:libselinux: replace PKG_PYTHON_DISTUTILS_ENV)
forgot to update a comment that refered to PKG_PYTHON_DISTUTILS_ENV.
Replace that now.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
gpg key generation can take longer than the default timeout on a
loaded or slow test host. The commit increase the timeout for the
key generation command to prevent the test to randomly fail.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Replace PKG_PYTHON_DISTUTILS_ENV by PKG_PYTHON_SETUPTOOLS_ENV as libdnet
uses setuptools instead of distutils since version 1.16.2 and
https://github.com/ofalk/libdnet/commit/4e4fc687953105b66bcc847a68869126ac3ec918
This will avoid the following build failure raised since commit
09de823cbc:
In file included from /home/fabrice/buildroot/output/per-package/libdnet/host/include/python3.12/Python.h:38,
from ./dnet.c:40:
/home/fabrice/buildroot/output/per-package/libdnet/host/include/python3.12/pyport.h:586:2: error: #error "LONG_BIT definition appears wrong for platform (bad gcc/glibc config?)."
586 | #error "LONG_BIT definition appears wrong for platform (bad gcc/glibc config?)."
| ^~~~~
Fixes: 09de823cbc
(No autobuilder failure (yet))
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Replace PKG_PYTHON_DISTUTILS_ENV by PKG_PYTHON_SETUPTOOLS_ENV as
libselinux uses setuptools instead of distutils since version 3.5 and
https://github.com/SELinuxProject/selinux/commit/2b5d5585754eb731a68158b613c7676fc3195ed9
This will avoid the following build failure raised since commit
09de823cbc:
In file included from /home/buildroot/autobuild/instance-0/output-1/per-package/libselinux/host/include/python3.12/Python.h:38,
from selinuxswig_python_wrap.c:168:
/home/buildroot/autobuild/instance-0/output-1/per-package/libselinux/host/include/python3.12/pyport.h:586:2: error: #error "LONG_BIT definition appears wrong for platform (bad gcc/glibc config?)."
586 | #error "LONG_BIT definition appears wrong for platform (bad gcc/glibc config?)."
| ^~~~~
Fixes: 09de823cbc
Fixes: http://autobuild.buildroot.org/results/3fbbb741de33310c8cacab753a32e79c5e531036
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure raised since the addition of the package
in commit 0a1f2fce04:
/home/autobuild/autobuild/instance-0/output-1/host/riscv64-buildroot-linux-uclibc/bin/ld.real: pty.o: in function `my_pty_fork':
pty.c:(.text+0x68): undefined reference to `fork'
/home/autobuild/autobuild/instance-0/output-1/host/riscv64-buildroot-linux-uclibc/bin/ld.real: filter.o: in function `.L0 ':
filter.c:(.text+0x134): undefined reference to `fork'
Fixes:
- http://autobuild.buildroot.org/results/0a3a68cfb181bc67a7dbf1d44f64b0a29df75987
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that we can specify that the default values for the CPE_ID variables
are valid, without having to actually set one (or more) to their
default, add a check-package check that validates that the CPE_ID
variables are indeed not set to their default.
It also validates that CPE_ID_VALID is not set when another CPE_ID
variable is set to a non-default value.
Add an anchor in the manual so that we can easily point to it.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that we document _CPE_ID_VALID, and that it shall be used instead of
setting a default value to one of the other _CPE_ID_* variables, change
all of the existing packages to use it, to avoid any error when we later
extend check-package to validate the sanity ofthe _CPE_ID_* variables.
Mechanical change done within the reference container, running the new
check in check-package, to report the CPE_ID errors:
$ make check-package 2>/dev/null \
|awk '{
split($(1), a, ":"); fname = a[1]
split($(2), a, "'\''"); val = a[2]
new_var = $(8); gsub("_CPE_ID_.*", "_CPE_ID_VALID", new_var)
printf("%s %s %s %s\n", fname, $(8), val, new_var)
}' \
|while read fname var val new_var; do
sed -r -i -e "s/${var}[[:space:]]*=[[:space:]]*${val}/${new_var} = YES/" "${fname}"
done
$ git diff -I'CPE_ID_(VENDOR|VALID)'
[empty]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The way we handle CPE_ID variable is unusual compared to the other
variables: we mostly compute defaults for all of them, and eventually
aggregate the various CPE_ID variables to form the CPE ID name.
However, we do not consider that CPE ID to valid, unless there is one
(or more) CPE_ID variables actually set by the package; this shows that
the CPE ID has been checked to be valid against the NVD CPE database. In
that situation, we internally define the duly undocumented _CPE_ID_VALID
variable.
However, it is totally possible (and very often the case) that the
default value we set to those variables are appropriate, and do defne a
valid CPE ID. In this case, the package will define any arbitrary CPE_ID
variable to its default value, usually by setting either the VENDOR or
PRODUCT field, though there is no rule or requirement that be the case.
This is not very clean, non-obvious, and does not allow for easily
adding checks in check-package.
Add the _CPE_ID_VALID variable to the manual, to make it official that
it should be used when the default values of the others are valid.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With recent asiidoc versions (at least 10.2.0 is known to report that),
rendering the manual yields a few warnings related to ordered lists:
asciidoc: WARNING: customize-quick-guide.adoc: line 13: list item index: expected 2 got 1
asciidoc: WARNING: customize-quick-guide.adoc: line 15: list item index: expected 3 got 1
[...]
asciidoc: WARNING: customize-quick-guide.adoc: line 65: list item index: expected 13 got 1
asciidoc: WARNING: customize-quick-guide.adoc: line 66: list item index: expected 14 got 1
asciidoc: WARNING: adding-packages-gettext.adoc: line 30: list item index: expected 2 got 1
asciidoc: WARNING: adding-packages-gettext.adoc: line 41: list item index: expected 3 got 1
The reason is that we use the same index to tell asciidoc to
automatically number items.
However, the official way to provide an automatic index is to write no
index:
https://docs.asciidoctor.org/asciidoc/latest/lists/ordered/
[...] since the numbering is obvious, the AsciiDoc processor will
insert the numbers for you if you omit them:
[...]
If you number the ordered list explicitly, you have to manually keep
the list numerals sequential. Otherwise, you will get a warning.
So, abide by the documentation, and drop the repeating indices to
ordered lists where we want automatic numbering.
Note that there is another ordered list, in adding-packages-directory.adoc,
but it does use explicit, sequential numbering. For consistency within
the whole document, we also convert it.
To avoid extra useless churn, the indentation of the items is not
changed to match the elided indices.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
phobosdpl is an old work email I don't really use anymore, so I'm
changing it to my personal email.
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The last Jailhouse tag is v0.12. It dates from 2020-02-04, which is
4 years old. This version no longer compiles with recent Kernels.
This commit updates Jailhouse to the latest commit e57d1ef, which
dates from 2023-01-10.
For commit logs, see:
https://github.com/siemens/jailhouse/commits/master/
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The jailhouse package installs files in the /usr/local prefix. This is
not convenient, because the jailhouse binary ends up in /usr/local/sbin,
which is not in the default Buildroot PATH. See [1]. Moreover, all
other Buildroot packages install files in /usr.
This is because the Buildroot package recipe does not set any prefix
value, and the upstream Jailhouse Makefile has a default to /usr/local.
See [2].
This commit sets the prefix value in the JAILHOUSE_MAKE_OPTS and also
updates other installation commands to put all the files in /usr.
[1] https://gitlab.com/buildroot.org/buildroot/-/blob/2023.11.1/system/Config.in#L495
[2] https://github.com/siemens/jailhouse/blob/v0.12/scripts/include.mk#L22
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following security issues:
https://webkitgtk.org/security/WSA-2024-0001.html
- CVE-2024-23222: Processing maliciously crafted web content may lead to
arbitrary code execution. Apple is aware of a report that this issue may
have been exploited. Description: A type confusion issue was addressed
with improved checks.
- CVE-2024-23206: A maliciously crafted webpage may be able to fingerprint
the user. Description: An access issue was addressed with improved access
restrictions.
- CVE-2024-23213: Processing web content may lead to arbitrary code execution.
Description: The issue was addressed with improved memory handling.
- CVE-2023-40414: Processing web content may lead to arbitrary code
execution. Description: A use-after-free issue was addressed with
improved memory management.
- CVE-2023-42833: Processing web content may lead to arbitrary code execution.
Description: A correctness issue was addressed with improved checks.
- CVE-2014-1745: Processing a file may lead to a denial-of-service or
potentially disclose memory contents. Description: The issue was
addressed with improved checks.
https://webkitgtk.org/security/WSA-2023-0012.html
- CVE-2023-42883: Processing a SVG image may lead to a denial-of-service.
Description: The issue was addressed with improved memory handling.
- CVE-2023-42890: Processing web content may lead to arbitrary code
execution. Description: The issue was addressed with improved memory
handling.
https://webkitgtk.org/security/WSA-2023-0011.html
- CVE-2023-42916: Processing web content may disclose sensitive information.
Apple is aware of a report that this issue may have been actively
exploited. Description: An out-of-bounds read was addressed with improved
input validation.
- CVE-2023-42917: Processing web content may lead to arbitrary code
execution. Apple is aware of a report that this issue may have been
actively exploited. Description: A memory corruption vulnerability was
addressed with improved locking.
Add an upstream post-2.42.5 patch to fix an issue with an invalid backport
causing a build issue.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 1edb9d691d (package/v4l2loopback: add
V4L2LOOPBACK_CPE_ID_VENDOR) added that variable, but set to its default
value.
This is however not required to define a valid CPE ID, as it also
defines a non-default CPE_ID_PREFIX.
Drop V4L2LOOPBACK_CPE_ID_VENDOR now.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The symmetric encryption test can sometimes take longer than the default
timeout. This commit increase the timeout to 10 seconds for that
command.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds support for the AVNET RZBoard V2L.
The board support creates a bootable sd card image. The board is
shipped with a u-boot inside its eMMC. The board support uses this
u-boot and does not build and deploy a u-boot onto the sd card.
Instead the sd card only contains a uEnv.txt, a kernel image and the
rootfs.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The petitboot UI looks much nicer in a Unicode locale:
* Items in the language selection submenu use multibyte Unicode
characters. In other locales, they say "Unable to display text in this
locale".
* The combination of TERM=linux with a UTF-8 locale is required to
trigger a special-case workaround in ncurses code[1]. Without
this, line-drawing characters in the menu look like q's.
Turn on wchar support in ncurses, and add a reminder that a UTF-8 locale
should be generated for things to look right.
[1] https://invisible-island.net/ncurses/ncurses.faq.html#no_line_drawing
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Normalize the order of arguments to $(INSTALL). Remove an unnecessary
pair of parentheses.
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The patch drops the file README.md from the license files. Indeed, the
licensing terms apply to third-party libraries that uuu links to, and
even though they are bundled in the source tree of uuu|mfgtools, they
are not used by Buildroot as we use the ones we build. Therefore, the
actual license file of the package is the file LICENSE.
Moreover, this also leads to simplifying the bump to new versions.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop no longer required python-setuptools runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
When the CVE lookup was added in commit
4a157be9ef, the starting year of the JSON
files was set to 2002. However, there are also CVEs from 1999, 2000 and
2001. It is not clear why these were skipped back then.
Set the start year to 1999 to capture these old CVEs too.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
NVD will deprecate the v1.1 API which allows us to download the full
database as individual JSON files. Instead, there's a horribly crappy
API that is extremely slow and subject to race conditions.
Fortunately, there is a project, Fraunhofer FKIE - Cyber Analysis and
Defense [1], that goes through the effort of adapting to this new API
and regenerating the convenient JSON files. The JSON files and meta
files are re-generated daily.
Instead of implementing the NVD v2 API, we decided to just use the JSON
files generatd by fkie-cad. That saves us the effort of solving the race
conditions, devising a cache mechanism that works, handling the frequent
gateway timeouts on the NVD servers, dealing with the rate limiting, and
keeping up with changes in the API.
Switch to this repository on github as NVD_BASE_URL. The file name is
also slightly different (CVE-20XX.json instead of nvdcve-1.1-20XX.json).
The fkie-cad repository compresses with xz instead of gz. Therefore:
- rename the filename variables to _xz instead of _gz;
- use xz as a subprocess because there is no xz decompressor in Python
stdlib.
[1] https://www.fkie.fraunhofer.de/en/departments/cad.html
Cc: Daniel Lang <dalang@gmx.at>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We currently check the CPE database to see if the CPE ID we use
(including the version) is already in the database.
However, the version part of the CPE ID is not actually used for CVE
matching. Instead, the CVEs have a range of versions associated with
them and we match against those ranges.
In addition, NVD is moving to a new API for accessing the CPE database.
It will not longer be possible to simply download all the CPE IDs, and
due to rate limiting, the download will have to be done in several
queries.
Since all of this is anyway of limited use, drop the CPE database lookup
entirely. Instead, as long as a CPE ID is defined in a package, it is
considered OK, without any checks.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The package/busybox/busybox-minimal.config is the default configuration
for MMU-less systems, so the setting is redundant and can be removed
without effect.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with aarch64 and BR2_OPTIMIZE_0 raised
since commit 0512910e49:
src/convert-neon-body-bayer8.inc.h: In function 'bayer2rgb_convert_neon':
src/convert-neon.c:233:17: error: third argument to '__builtin_prefetch' must be a constant
233 | __builtin_prefetch(((void const *)(_addr)) + 64, 0, (_lvl)); \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/convert-neon-body-bayer8.inc.h:8:9: note: in expansion of macro 'do_prefetch'
8 | do_prefetch(&in[+1*stride - 1], (rows_per_loop) < 3 ? 3 : 0);
| ^~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/307c1c448becd99dfba3a17b3ef816db0bb5cad6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
swugenerator might use openssl to encrypt files in .swu(cpio)
resulting output archive and gzip or zlib to compress the same files
but we're not sure whether build environment have or not openssl, gzip
and zlib installed so we add them as host dependencies.
Signed-off-by: Giulio Benetti <giulio.benetti+tekvox@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The meson upgrade from 1.1.1 to 1.2.0 have been reverted because
host-qemu (version v8.0.3) was searching libraries in the build machine
instead of buildroot host directory [1].
$ grep -r LINK_ARGS * | grep "\-L/usr"
build.ninja: LINK_ARGS =
-L/usr/lib/gcc/x86_64-linux-gnu/10 \
-L/usr/lib/gcc/x86_64-linux-gnu/10/../../../x86_64-linux-gnu -L/usr/lib/x86_64-linux-gnu \
-L/usr/lib/gcc/x86_64-linux-gnu/10/../../../../lib -L/usr/lib \
-L/lib/x86_64-linux-gnu \
-L/lib/../lib \
-L/usr/lib/../lib \
-L/usr/lib/gcc/x86_64-linux-gnu/10/../../.. \
-L/lib \
-I/[...]/host/include \
-L/[...]/host/lib \
-I/[...]/host/include/libfdt \
...
Upgrading qemu to version v8.1.0 solves the problem:
$ grep -r LINK_ARGS * | grep "\-L/usr"
build.ninja: LINK_ARGS =
-I/[...]/host/include \
-L/[...]/host/lib \
-I/[...]/host/include/libfdt \
...
Those two tests were done with the same buildroot version (2023.08) on
the same machine were the bug appeared. Using, git bisect, in this
environment, it was found that the problem was fixed in qemu by the
commit [2].
Thus, it is possible that the problem was introduced by improper use of
meson by qemu <= v8.0.3. Also, meson has been updated to version 1.2.1
and 1.3.0 in yocto and it doesn't seem to create any issue. [3]
The original problem is no longer present and some projects require
meson > 1.1.1 (e.g. rusticl requires meson 1.2.0 since mesa 23.3.0 and
meson 1.3.1 since mesa 24.0.0).
"pkgconfig" field is deprecated by meson 1.3.0 and replaced by
"pkg-config". See: [4]
The patch that adds the pkg_config_static property has been rebased.
[1] https://gitlab.com/buildroot.org/buildroot/-/commit/acfdf21f0b752e844a33c70a0fd2f82f4534a5a0
[2] https://gitlab.com/qemu-project/qemu/-/commit/Fc9a809e0d28417fa1e7f7efc19f845bda4c1be9
[3] https://github.com/yoctoproject/poky/commits/master/meta/recipes-devtools/meson
[4] https://mesonbuild.com/Release-notes-for-1-3-0.html#machine-files-pkgconfig-field-deprecated-and-replaced-by-pkgconfig
Signed-off-by: Antoine Coutant <antoine.coutant@smile.fr>
[yann.morin.1998@free.fr:
- keep our formatting in the patch
- reflow commit log (to keep busy while test-building!)
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
TestGlxinfo fail with a new runtime error:
# glxinfo -B -display :0
name of display: :0
traps: glxinfo[84] trap invalid opcode ip:b73c7027 sp:bf8433c0 error:0 in swrast_dri.so[b6e4c000+64f000]
Illegal instruction
The x86-core2 Bootlin toolchains are built for a core2 CPU [0],
this means that the Bootlin toolchains may use core2-specific
instructions.
The TestGlxinfo test is setup for BR2_x86_core2, so our
executables will also contain core2 instructions.
However, the default Qemu x86 is not guaranteed to emulate all the
instructions specific to core2, causing runtime issues as reported
above.
A similar issue has been fixed by adding Nehalem cpu emulation on
the qemu command line. See 4f565b5222 ("support/testing: use Nehalem
cpu emulation for TestGrubX8664EFI").
Set core2duo cpu emulation for TestGlxinfo on the qemu command line.
[0] https://gitlab.com/buildroot.org/toolchains-builder/-/blob/kubu/toolchain-builder-2023.08/configs/arch/x86-core2.config?ref_type=heads
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
mesa3d 23.3 added dri3_priv.h header and dri3_check_multibuffer() function in
drisw (part of swrast gallium driver) that can be build without dri3.
i686-buildroot-linux-gnu/bin/ld: src/glx/libglx.a.p/drisw_glx.c.o: in function `driswCreateScreenDriver':
drisw_glx.c:(.text.driswCreateScreenDriver+0x3a0): undefined reference to `dri3_check_multibuffer'
collect2: error: ld returned 1 exit status
Add HAVE_DRI3 guard around dri3_priv.h header and the zink code using
dri3_check_multibuffer().
While testing again the TestGlxinfo runtime test, a new unexpected error line
appeared in the glxinfo log:
MESA-LOADER: failed to open zink: /usr/lib/dri/zink_dri.so
mesa3d try to load zink gallium driver even if it was not enabled at
build time, indeed there is no such option in Buildroot.
Apply patches sent upstream:
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27478
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6093854455
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The defconfig choice is the default one, so it is redundant and can be
removed without effect.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 6b2329bb80 ("configs/ti_am64x_sk: new defconfig") forgot to
specify the Linux kernel version, so do that now.
When the defconfig was added, the default version was 6.4.x, so use
version 6.4.16.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes build issue of the python support with python 3.12 (2.3.4
unconditionally uses distutils).
The license file used being a header file, it has changed due to code
changes, but the license is still LGPL-3.0+.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 719921bebe (package/kexec: bump to version 2.0.27) forgot to
propagate the new dependency on kernel headers to petitboot, which may
select kexec, causing unmet dependencies warnings (unfortunately, not
errors), such as:
$ KCONFIG_SEED=0x84462FFC make randconfig
WARNING: unmet direct dependencies detected for BR2_PACKAGE_KEXEC
Depends on [n]: BR2_PACKAGE_KEXEC_ARCH_SUPPORTS [=y] && BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_17 [=n]
Selected by [y]:
- BR2_PACKAGE_PETITBOOT [=y] && (BR2_PACKAGE_KEXEC_ARCH_SUPPORTS [=y] || BR2_PACKAGE_KEXEC_LITE_ARCH_SUPPORTS [=n]) && BR2_USE_MMU [=y] && BR2_USE_WCHAR [=y] && !BR2_STATIC_LIBS [=n] && BR2_TOOLCHAIN_HAS_THREADS [=y] && BR2_PACKAGE_HAS_UDEV [=y] && !BR2_PACKAGE_KEXEC_LITE_ARCH_SUPPORTS [=n]
Propagate the dependency from kexec, and add comments about dependencies
also inherited from kexec-lite.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, the comment about availability is between the package main
symbol and its suboptions, breaking the threading in menuconfig.
Invert the order, and move the comment last. Also enclose the suboptions
between an if-block, as it is more customary.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, the makedevs syntax explanations are duplicated: one in
the package directory, which was introduced firat but bit-rotted for
a while each time the makedevs was updated, and once in the manual,
which lagged much less. As for all duplicated documentation, the two
diverged and one was not updated.
In commit 738fb6dfa4 (docs/manual: extend makedev syntax section),
we recently updated the makedevs syntax description, but that indeed
missed the old README.
Get rid of the README and replace it with a symlink to the manual
makedevs section.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The gstreamer plugin select the EGL backend of gst1-plugins-base, but
forgot to propagate all of its dependencies, notably the _HAS_API
condition, causing unmet dependencies warnings (unfortunately, not
errors), such as;
$ KCONFIG_SEED=0x597D22A8 make randconfig
WARNING: unmet direct dependencies detected for BR2_PACKAGE_GST1_PLUGINS_BASE_LIB_OPENGL_EGL
Depends on [n]: BR2_PACKAGE_GSTREAMER1 [=y] && BR2_PACKAGE_GST1_PLUGINS_BASE [=y] && BR2_PACKAGE_GST1_PLUGINS_BASE_LIB_OPENGL [=y] && BR2_PACKAGE_GST1_PLUGINS_BASE_LIB_OPENGL_HAS_API [=n] && BR2_PACKAGE_HAS_LIBEGL [=y]
Selected by [y]:
- BR2_PACKAGE_IVI_HOMESCREEN_GSTREAMER_EGL_PLUGIN [=y] && BR2_PACKAGE_IVI_HOMESCREEN [=y] && BR2_PACKAGE_FFMPEG_ARCH_SUPPORTS [=y] && BR2_PACKAGE_HAS_LIBEGL [=y]
We can't select _HAS_API, because it is a symbol that represents a
capability provided by other features of gst1-plugins-base; it's
semantically like a virtual package: we can't select it, we can only
depend on it.
Add this dependency to fix this situation.
This however causes circular (recursive) dependencies errors:
package/gstreamer1/gst1-plugins-base/Config.in:135:error: recursive dependency detected!
package/gstreamer1/gst1-plugins-base/Config.in:135: symbol BR2_PACKAGE_GST1_PLUGINS_BASE_LIB_OPENGL is selected by BR2_PACKAGE_IVI_HOMESCREEN_GSTREAMER_EGL_PLUGIN
package/ivi-homescreen/Config.in:221: symbol BR2_PACKAGE_IVI_HOMESCREEN_GSTREAMER_EGL_PLUGIN depends on BR2_PACKAGE_GST1_PLUGINS_BASE_LIB_OPENGL_HAS_API
package/gstreamer1/gst1-plugins-base/Config.in:149: symbol BR2_PACKAGE_GST1_PLUGINS_BASE_LIB_OPENGL_HAS_API is selected by BR2_PACKAGE_GST1_PLUGINS_BASE_LIB_OPENGL_OPENGL
package/gstreamer1/gst1-plugins-base/Config.in:152: symbol BR2_PACKAGE_GST1_PLUGINS_BASE_LIB_OPENGL_OPENGL depends on BR2_PACKAGE_GST1_PLUGINS_BASE_LIB_OPENGL
Indeed, _HAS_API is only even set when gstreamer1, gst1-plugins-base,
and the gst1-plugins-base's lib-opengl support, are all already enabled.
As such, the dependency on _HAS_API already implies those, and there is
no need to select them.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Adam Duskett <adam.duskett@amarulasolutions.com>
Reviewed-by: Adam Duskett <Adam.Duskett@amarulasolutions.com>
Tested-by: Adam Duskett <Adam.Duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Born as a project to read/write the bootcount on the TI am3xx platform,
over time it has introduced bootcount management on EEPROM and for the
stm32mp1 platform. As a result, the project removed the 'davinci' tag
from its name and GitHub link.
The patch aligns the package name in Buildroot with the current one on
GitHub.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[Peter: extend/rework legacy handling]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We recently added support for building a bare-metal toolchain, and the
autobuilders are therefore trying to build such toolchains. However,
by default the BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH option is
empty, causing the target tuple to be empty, and therefore
host-gcc-bare-metal tries to build a toolchain for the target
"x86_64-pc-linux-gnu", which isn't a bare-metal target, and fails
badly.
In order to properly test this bare-metal support, this commit adjusts
the genrandconfig script so that it injects a valid target
architecture tuple.
Fixes:
http://autobuild.buildroot.net/results/6cb1514b19bfe056fb984d3538bdccdda5e174c1/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 4b8fddb060 ("configs/ti_am62x_sk: new defconfig) forgot to
specify the Linux kernel version, so do that now.
When the defconfig was added, the default version was 6.4.x, so use
version 6.4.16.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[Romain:
use BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_4 as suggested
by Giulio Benetti]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Commit
c6ab9328e1 ("boot/arm-trusted-firmware:
change BR_NO_CHECK_HASH_FOR logic") was written too hastily, and is
actually broken as it does the reverse of what it should do. It really
should disable the check when we're using a custom version/git/tarball
of TF-A, not the opposite.
Thanks to Romain for pointing out the problem, and providing an IRL
patch to solve the issue.
Reported-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This toolset was designed to facilitate the testing, monitoring, and
tracing of various things with virtual memory, pages, and slab objects.
It is an invaluable resource for identifying and analyzing
memory-related issues, such as leaks and bottlenecks, and can greatly
enhance one's understanding of memory utilization within a system.
The mm toolset includes:
- page_owner_sort: userspace helper to sort the output of
/sys/kernel/debug/page_owner, which helps to know who allocates
the page from kernel context
- slabinfo: the tool which gets reports about slabs, for example
show empty slabs, modify of slab debug options at runtime, display
all information about a slabcache
- page-types: a handy tool for querying page flags
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
[yann.morin.1998@free.fr:
- don't depend on linux, already a patch dependency
- don't set CC: default is based on CROSS_COMPILE
- no need to fully recheck at install time
- move the option for alphabetical ordering
- fix check-package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Patrick Oppenlander <patrick.oppenlander@gmail.com>
[Peter: Fix check-package warnings, move to "Shell and utilities" and add
DEVELOPERS entry]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following musl build failure raised since bump to version 1.6.0
in commit 7794fa4c4e:
pam_namespace.c: In function 'process_line':
pam_namespace.c:649:41: error: 'SIZE_MAX' undeclared (first use in this function)
649 | if (count > UINT_MAX || count > SIZE_MAX / sizeof(uid_t)) {
| ^~~~~~~~
pam_namespace.c:41:1: note: 'SIZE_MAX' is defined in header '<stdint.h>'; did you forget to '#include <stdint.h>'?
40 | #include "argv_parse.h"
+++ |+#include <stdint.h>
41 |
Fixes:
- http://autobuild.buildroot.org/results/f07360f33010a2cf19aace266faae14a834bd9a4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
uImage is almost deprecated so let's switch to zImage. Let's also bump
Linux version to 6.1.44, U-Boot to 2023.07 and remove
BR2_TARGET_UBOOT_NEEDS_PYTHON3 since it's selected by
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Note that we do not document the special flit-bootstrap value, as it
is considered an internal implementation detail, and shouldn't
normally be used by packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Python 3.12.1 has removed distutils support. As such, we remove the distutils
option from pkg-python.mk as well.
Tested on Fedora 39, and Debian 11. All 68 package tests pass.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
All Python packages have been migrated to a different setup type, and
we're about to bump to Python 3.12 which no longer supports distutils,
so let's drop support for distutils in our python-package
infrastructure.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[Thomas: also update the Buildroot manual]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The current package has not recieved an update since Sat Oct 9 2021
33ece2446e and is not python 3.12 compatible.
Furthermore, the current version requires at least 42 new packages worth of
depedencies of which several require patches to be python 3.12 compatible.
As nobody has stepped up to maintain the package and its ever-growing list of
dependencies, along with the other problems, it is time to drop the package.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The python-pygame package has not recieved any update since
Sun May 1 22:15:17 2016 (commit: a9ec96e545)
Also, this package no longer builds properly against python 3.12.0. Receiving
the following error when building:
```
src/surface.c:2812:14: error: invalid type argument of unary ‘*’ (have
‘int’)
2812 | ch = *PyUnicode_AS_UNICODE (obj);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
src/surface.c: In function ‘PySurface_Blit’:
```
If someone wants to re-introduce this package at a later date they are more
than welcome to do so!
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libressl dropped engine support since version 3.8.1 resulting in the
following build failure since bump of libressl to version 3.8.2 in
commit 21eca49ed5:
eng_front.c: In function 'IMPLEMENT_DYNAMIC_CHECK_FN':
eng_front.c:262:1: error: expected declaration specifiers before 'IMPLEMENT_DYNAMIC_BIND_FN'
262 | IMPLEMENT_DYNAMIC_BIND_FN(bind_fn)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/389ed112f082a4917f777f3e236211059c4c6d6e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Security fixes:
- CVE-2023-52425: Fix quadratic runtime issues with big tokens that can
cause denial of service, in partial where dealing with compressed XML
input. Applications that parsed a document in one go -- a single call
to functions XML_Parse or XML_ParseBuffer -- were not affected. The
smaller the chunks/buffers you use for parsing previously, the bigger
the problem prior to the fix.
- CVE-2023-52426: Fix billion laughs attacks for users compiling
*without* XML_DTD defined (which is not common). Users with XML_DTD
defined have been protected since Expat >=2.4.0 (and that was
CVE-2013-0340 back then).
https://blog.hartwork.org/posts/expat-2-6-0-released/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The custom kernel used for the Rock5B features an FIQ debug
interface which is enabled by default. As it is not needed, it is
disabled. The documentation features instructions on how to
re-enable it, if it is needed.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Search the external trees for package files and add them to the list.
The list of directories walked and excluded are the same as for the main
tree, and should work out of the box if the user sticks to the directory
structure suggested in the manual.
Two additional properties were added to the Package class, the tree name and
the path. For consistency and to simplify the code, packages in the main tree
are marked as coming from "BR2".
The HTML output has a new column listing the external name (or "BR2") and the
json output has a new property "tree".
Signed-off-by: Juan Carrano <juan.carrano@ebee.berlin>
[Arnout:
- fix flake8 error "'itertools' imported but unused";
- use str.split instead of str.partition;
- use BR2_EXTERNAL_BUILDROOT_PATH instead of BR2_EXTERNAL_BR2_PATH;
- remove pkgdir variable, instead use self.pkgdir.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
[yann.morin.1998@free.fr: make it explicit it is not the official way]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds a new package for building newlib for a bare-metal toolchain.
The cpu architecture is defined by a toolchain-bare-metal virtual package.
While any cpu architecture could be used, the default configuration will be a
Xilinx microblaze little endian architecture, so that buildroot will be able
to build the microblaze firmware applications for zynqmp and versal.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a new package for building gcc for a bare-metal toolchain.
The cpu architecture is defined by a toolchain-bare-metal virtual package.
While any cpu architecture could be used, the default configuration will be a
Xilinx microblaze little endian architecture, so that buildroot will be able
to build the microblaze firmware applications for zynqmp and versal.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a new package for building binutils for a bare-metal toolchain.
The cpu architecture is defined by a toolchain-bare-metal virtual package.
While any cpu architecture could be used, the default configuration will be a
Xilinx microblaze little endian architecture, so that buildroot will be able
to build the microblaze firmware applications for zynqmp and versal.
In order to build the zynqmp pmufw and versal plm applications without error,
binutils version 2.41 or higher is required.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a new virtual package for adding a bare-metal
toolchain to Buildroot. For now, it depends on nothing, so it will not
actually build anything, but it defines some options that will be
needed by the various packages that will be part of this toolchain
build process.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The assumption is that updates to the stable branch should not break anything,
so we use the latest LTS rather than a specific version.
Signed-off-by: Marleen Vos <marleen.vos@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The assumption is that updates to the stable branch should not break anything,
so we use the latest LTS rather than a specific version.
Signed-off-by: Marleen Vos <marleen.vos@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Patch 0001-feat-build-add-support-for-new-binutils-versions.patch as
found in v2.8 patch dir has already been applied in lts-v2.8.13
Patch 0002-build-tools-avoid-unnecessary-link.patch from v2.8 has
been included as 0001-build-tools-avoid-unnecessary-link.patch for
lts-v2.8.13
Signed-off-by: Marleen Vos <marleen.vos@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, arm-trusted-firmware checks the hash only if
BR2_TARGET_ARM_TRUSTED_FIRMWARE_LATEST_VERSION=y. As we're about to
introduce other version options for which the hash checking is needed,
let's reverse the logic, and instead ignore hash checking if we're
using a custom version or custom git or custom tarball.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The #buildroot IRC channel recently changed from only allowing
registered users to join to allowing anyone to join but only allowing
registered users to talk in the channel. This still avoids the spam
problem on IRC while allowing an exception for users bridged from
matrix.org. These already have a username registered on the matrix side
and thus similar properties as a registered IRC user/nick.
The commands to set these options were:
* Set +q on all unregistered nicks: ~/mode #buildroot +q $~a~ this lets
people join but they can't talk
* Set exempt on matrix hosts: ~/mode #buildroot +e $x:matrix.org~
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
[yann.morin.1998@free.fr: the default is an interactive shell]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
check-package does a lot more by now than checking .mk and
Config.in files. Add this to the description.
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Migrate from setuptools to hatchling pep517 build backend.
Drop no longer required python-setuptools runtime dependency.
Drop no longer required python-six runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
pkg-cargo currently sets the --release flag unless BR2_ENABLE_DEBUG is
set. However, this does not accurately reflect the configured build
settings. In addition, it only works for packages that use the cargo
infrastructure directory and not with packages using the cargo
environment indirectly, such as pyo3 based python packages. To support
these, we really want to pass the necessary flags in PKG_CARGO_ENV.
In order to accurately reflect the configured build settings
(optimization and debug levels), we set the appropriate environment
variables according to the global settings.
There is no way to specify the profile to use through an environment
variable, it has to be set through a cargo flag like --release. Since we
can't easily control the profile flags used by non-cargo package
infrastructures, we instead set the env variables for both root profiles
(dev/release). For the aspects that are not affected by the global
settings (incremental, codegen-units, split-debuginfo), we set them
equal to the default for release - which in our context is the
appropriate choice even when BR2_ENABLE_DEBUG is set.
For reference the default cargo root profile settings are:
https://doc.rust-lang.org/cargo/reference/profiles.html#default-profiles
Cc: Moritz Bitsch <moritz@h6t.eu>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Tested-by: Moritz Bitsch <moritz@h6t.eu>
Tested-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Reviewed-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
glm did not install headers since [1], at least in a per-package
build. Bumping to 1.0.0 fixes that.
The cmake option to avoid building the lib has changed
Partially fixes [2], where cegui failed to configure because of
the missing glm headers.
It also fixes kodi-screensaver and kodi-visualisation (no autobuidl
failures so far):
CMake Error at [...]/output/per-package/kodi-screensaver-asteroids/host/share/cmake-3.28/Modules/FindPackageHandleStandardArgs.cmake:230 (message):
Could NOT find glm (missing: GLM_INCLUDE_DIR)
[1] 01ad113 package/glm: bump to version 0.9.9.8
[2] http://autobuild.buildroot.org/results/241/241a60f8ecb6fec5dc122d64dd438dd4249f8c3e/
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
[yann.morin.1998@free.fr: add kodi failures from Bernd]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Patch 0001-build-tools-avoid-unnecessary-link.patch that was applied to
v2.9 is already in v2.10, so no new patch dir for v2.10 is added
Signed-off-by: Marleen Vos <marleen.vos@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- v2.6 changes to FIP instead of SSBL boot.
- This requires switching to u-boot.bin in U-Boot, and using that
instead of .stm32 in ATF.
- fiptool expects dtb to be split off from u-boot.bin, so need custom
u-boot-nodtb.bin in addition to u-boot.dtb.
Caveat: this is perhaps not really obligatory, but the ATF
documentation explains it like that.
- The partition must be named fip (while it must be named ssbl for
SSBL boot).
- Since the partition name is set in the common template, all
defconfigs using that template must be bumped in a single commit
- ATF now produces both fip.bin and <boardname>.stm32, so fip.bin has
been added to the configs
- While we're at it, add the structuring comments to
avenger96_defconfig similar like the other defconfigs
Signed-off-by: Marleen Vos <marleen.vos@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The regex was a bit too strict in which characters it allowed. Thus,
if e.g. a file name appears in the
BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES string, it no
longer matches, and we end up with an empty ATF_VARIABLES. This makes
the subsequent grep fail, and the post-image.sh script fails without
any error message (thanks to the -e option).
Simplify the regex to match everything except the closing quotation
mark. Note that Kconfig doesn't allow quotation marks at all inside a
string (even escaped ones), so this regular expression is always OK.
Signed-off-by: Marleen Vos <marleen.vos@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The buildroot manual says this kind of commit should be done together
with the actual changes made to a config/board. But since a number of
changes will follow for some boards and configs, it seemed more
logical to make a separate commit for this.
Signed-off-by: Marleen Vos <marleen.vos@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a runtime test for fastapi. Use uvicorn as the asgi server
application as does the fastapi hello world example [1].
Fastapi depends on PydanticV2 now which is written in rust so we need to
run the test on armv7.
[1] https://fastapi.tiangolo.com/tutorial/first-steps/
Signed-off-by: Marcus Hoffmann <bubu@bubu1.eu>
[Arnout:
- fix flake8 errors
support/testing/tests/package/sample_python_fastapi.py:5:1: E302 expected 2 blank lines, found 1
support/testing/tests/package/sample_python_fastapi.py:8:1: W391 blank line at end of file
- Remove BR2_CCACHE (as requested by Marcus).
- Add a comment explaining that this also tests uvicorn and pydantic.
- Re-try wget in a loop instead of a fixed timeout of 30 seconds.
- Add a DEVELOPERS entry.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Uvicorn has a hard requirement on the python ssl module. Without it even
running uvicorn --help fails.
Signed-off-by: Marcus Hoffmann <bubu@bubu1.eu>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Drop no longer required dependency on python-anyio. Note that
python-starlette still depends on anyio, but there's no direct
dependency from fastapi any more.
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The section of the manual describing the makedev syntax is not
up-to-date with the current features, and does not properly describe
existing ones.
- extend the list of types with the requirements on the existence of
the target file or directory; for 'c', 'b', and 'p', the existence
requirement is inherited from mknod(2):
ERRORS
...
ENOENT A directory component in pathname does not exist or is a
dangling symbolic link.
for the other types, the existence requirements are extracted from
the source of makedev.c;
- format the types flags, so they are rendered in monospace;
- extend the 'mode' description, as it can be set to -1 for 'f', 'd',
or 'r', so that only the uid and gid are set. This is most useful
for 'r', where setting the same mode recursively for all the
sub-directories and files alike does not really make sense; indeed
in this case, the modes are usually set correctly when the package
(or rootfs overlay) installs the files, and only the uid and gid are
interesting to set;
- extend and update the examples to show-case the -1 mode use-case.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump qemu_arm_ebbr_defconfig and qemu_aarch64_ebbr_defconfig in sync:
- Bump Linux to v6.6.11
- Bump U-Boot to 2024.01
- Bump TF-A to v2.10
While at it, adapt Qemu command line arguments to avoid a warning when
disabling ACPI.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The yjit feature requires rust toolchain support, since we don't
currently handle setting up the rust toolchain for ruby lets disable
this feature for now.
This broke when ruby was bumped to version 3.3.0 in buildroot commit
a01c278df7.
Fixes:
linking static-library libruby-static.a
LLVM ERROR: Invalid encoding
make[2]: *** [Makefile:318: libruby-static.a] Aborted
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
cpe:2.3:a:green_end:sftpserver has been deprecated in favor of
cpe:2.3:a:greenend:sftpserver in December 2022:
<cpe-item name="cpe:/a:green_end:sftpserver:0.2.2" deprecated="true" deprecation_date="2022-12-30T17:53:22.797Z">
<reference href="https://github.com/ewxrjk/sftpserver/releases">Version</reference>
<reference href="http://www.greenend.org.uk/rjk/sftpserver/">Product</reference>
<cpe-23:cpe23-item name="cpe:2.3:a:green_end:sftpserver:0.2.2:*:*:*:*:*:*:*">
<cpe-23:deprecated-by name="cpe:2.3:a:greenend:sftpserver:0.2.2:*:*:*:*:*:*:*" type="NAME_CORRECTION"/>
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Under some conditions (mostly slow execution due to test host load),
the netcat runtime test can randomly fail. This is due to several
facts:
- the sleep time between the server and client is too short,
- the use of netcat option -c could close the connection before the
server could receive all the data.
This commit improves the test robustness by increasing the sleep time,
and by reducing the amount of transferred data (from 1MB of random data,
to a simpler string of few bytes). Also, to make sure netcat cannot wait
on DNS resolution, this commit also adds the -n option.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6093854664
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
For details, see https://github.com/troglobit/watchdogd/releases/tag/4.0
- Major feature upgrade, command line and .conf files compatible
- LICENSE hash update due to update in copyright years
- Enabling system monitor plugins have changed syntax upstream. The
`--with-foo=SECONDS` is now just `--with-foo`
This last upstream change require converting affected Config.in options
from int -> bool. Legacy _WRAP:ers have been added to Config.legacy.in,
modeled on BR2_TARGET_ROOTFS_EXT2_BLOCKS.
Forcibly disable new monitors; they'll be enabled in a followup commit.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
[yann.morin.1998@free.fr:
- forcibly disable new monitors
- minor tweaks in Config.in.legacy
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 4b6202f721 set
LIBCURL_CPE_ID_PRODUCT to libcurl but this is not needed as
LIBCURL_CPE_ID_PRODUCT will be set to the package name
(i.e. libcurl) by default
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: Antoine Coutant <antoine.coutant@smile.fr>
Commit 35af2bb801 set
CONTAINERD_CPE_ID_PRODUCT to containerd but this is not needed as
CONTAINERD_CPE_ID_PRODUCT will be set to the package name
(i.e. containerd) by default
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: Antoine Coutant <antoine.coutant@smile.fr>
While the list of licenses is present in the show-info output, the list
of license files and the redistributable status were missing. Add them.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Disable lua bindings to avoid the following build failure if host-lua
and lua are built before brltty raised since bump to version 6.5 in
commit 82c6e87d5e and
https://github.com/brltty/brltty/commit/42bf48ca010d9163652cb0a014662fa243132736:
configure: lua package: lua
configure: lua includes:
configure: lua libs: -L/home/autobuild/autobuild/instance-0/output-1/host/bin/../sparc64-buildroot-linux-gnu/sysroot/usr/lib -llua -lm -ldl
checking for lua5.4... no
checking for lua... /home/autobuild/autobuild/instance-0/output-1/host/bin/lua
configure: Lua shell: /home/autobuild/autobuild/instance-0/output-1/host/bin/lua
configure: Lua library directory: /home/autobuild/autobuild/instance-0/output-1/host/lib/lua/5.3
[...]
/usr/bin/install -c -d /home/autobuild/autobuild/instance-0/output-1/target/home/autobuild/autobuild/instance-0/output-1/host/lib/lua/5.3
/usr/bin/install -c -s --strip-program /bin/true brlapi.so /home/autobuild/autobuild/instance-0/output-1/target/home/autobuild/autobuild/instance-0/output-1/host/lib/lua/5.3
make[3]: Leaving directory '/home/autobuild/autobuild/instance-0/output-1/build/brltty-6.6/Bindings/Lua'
[...]
brltty: installs files in /home/autobuild/autobuild/instance-0/output-1/target//home/autobuild/autobuild/instance-0/output-1
While at it, disable emacs bindings which have also been added in
version 6.5 with
https://github.com/brltty/brltty/commit/64a487e29941df54796645229a872ecbe2a06bfe
Fixes:
- http://autobuild.buildroot.org/results/f424e6727bbe61ea4b7703e93aae6fcab7506898
- http://autobuild.buildroot.org/results/bf4a161fc66fb99a24f08bea3436b13738f2e383
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
package/wlroots/0001-Add-feature-macros-to-more-C-files-.patch has been
rejected upstream, and the initial pull request was moved to the
freedesktop gitlab. Update the patch to reflect these changes.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Without the vulkan-loader package present, the configure step fails with the
following error message:
```
Run-time dependency vulkan found: NO (tried pkgconfig and system)
Message: Install "vulkan" or pass "-Dvulkan=disabled" to disable it.
```
The above error is due to the lack of the vulkan.pc file provided by the
vulkan-loader package. A search of autobuild failures containing
BR2_PACKAGE_WLROOTS=y and BR2_PACKAGE_MESA3D_VULKAN_DRIVER=y shows two build
failures. However, the failure reasons happened before wlroots could compile.
One for gerbera-1.10.0 and another for host-rust-1.64.0.
Add a dependency on the vulkan-loader package to resolve the above issue.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Enable the flutter-pi vulkan option if a suitable driver is enabled.
Currently, only Mesa provides Vulkan drivers. As such, gating the
feature behind the BR2_PACKAGE_MESA3D_VULKAN_DRIVER option is
reasonable at the moment and is done by three other packages already:
flutter-engine, ivi-home screen, and wlroots.
Furthermore, a dependency on BR2_PACKAGE_VULKAN_LOADER is needed as the
vulkan-loader package provides the vulkan.pc file, which the configure step
relies upon.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following grpc build failure raised since bump of libabseil-cpp
to version 20230802.1 in commit
aea790392a:
configure:25127: checking grpc++/grpc++.h usability
configure:25127: /home/buildroot/autobuild/instance-0/output-1/host/bin/sparc64-linux-g++ -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O1 -g0 -D_FORTIFY_SOURCE=2 -std=c++11 -DNOMINMAX -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.cpp >&5
In file included from /home/buildroot/autobuild/instance-0/output-1/host/sparc64-buildroot-linux-gnu/sysroot/usr/include/absl/base/config.h:86,
from /home/buildroot/autobuild/instance-0/output-1/host/sparc64-buildroot-linux-gnu/sysroot/usr/include/absl/base/const_init.h:25,
from /home/buildroot/autobuild/instance-0/output-1/host/sparc64-buildroot-linux-gnu/sysroot/usr/include/absl/synchronization/mutex.h:67,
from /home/buildroot/autobuild/instance-0/output-1/host/sparc64-buildroot-linux-gnu/sysroot/usr/include/grpcpp/impl/codegen/sync.h:32,
from /home/buildroot/autobuild/instance-0/output-1/host/sparc64-buildroot-linux-gnu/sysroot/usr/include/grpcpp/completion_queue.h:41,
from /home/buildroot/autobuild/instance-0/output-1/host/sparc64-buildroot-linux-gnu/sysroot/usr/include/grpcpp/channel.h:25,
from /home/buildroot/autobuild/instance-0/output-1/host/sparc64-buildroot-linux-gnu/sysroot/usr/include/grpcpp/grpcpp.h:52,
from /home/buildroot/autobuild/instance-0/output-1/host/sparc64-buildroot-linux-gnu/sysroot/usr/include/grpc++/grpc++.h:26,
from conftest.cpp:167:
/home/buildroot/autobuild/instance-0/output-1/host/sparc64-buildroot-linux-gnu/sysroot/usr/include/absl/base/policy_checks.h:79:2: error: #error "C++ versions less than C++14 are not supported."
79 | #error "C++ versions less than C++14 are not supported."
| ^~~~~
[...]
grpc . . . . . . . . no (libgrpc++ not found) (dependency error)
[...]
configure: error: "Some plugins are missing dependencies - see the summary above for details"
Fixes:
- http://autobuild.buildroot.org/results/e2cf909ab3c356f1881fd18cfa039e87faa10d7d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- drops support for proto2
- fixes compatibility with protobuf >= 22.0 (which we did not yet bump)
- to be compatible with new protobuf versions c++17 is now required
when building with protoc (which we only do for the host package) [0]
hence require host gcc >= 7 for c++17 support, propagate to
depending packages
- the license file has changed with a change of the copyright years,
nothing else
[0] https://github.com/protobuf-c/protobuf-c/pull/673
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Before commit ca63464e37 (package/python-numpy: bump to version
1.25.0), numpy was using python distuils. Then, the default for BLAS and
LAPACK detection was to disable support if they were not found, even
when OPENBLAS is installed on the host system.
Commit ca63464e37 switched python-numpy to use the meson-package
infrastructure, where the default has changed, and now fails when the
host system does have OPENBLAS installed:
buildroot$ make
>>> host-python-numpy 1.25.0 Configuring
[...]
Run-time dependency openblas found: NO (tried pkgconfig and cmake)
WARNING: CMake Toolchain: Failed to determine CMake compilers state
Run-time dependency openblas found: YES 0.3.21
Dependency openblas found: YES 0.3.21 (cached)
Program _build_utils/process_src_template.py found: YES (/path/to/buildroot/output/host/bin/python3 /path/to/buildroot/output/build/host-python-numpy-1.25.0/numpy/_build_utils/process_src_template.py)
Program _build_utils/tempita.py found: YES (/path/to/buildroot/output/build/host-python-numpy-1.25.0/numpy/_build_utils/tempita.py)
output/build/host-python-numpy-1.25.0/numpy/meson.build:201:44: ERROR: Could not get cmake variable and no default provided for <CMakeDependency OpenBLAS: True None>
[...]
Two obvious ways to correct this:
- Add some kind of host-lapack / host-openblas dependency to
host-python-numpy, or
- Tell host-python-numpy not to look for (or rely on) external code.
Because the host numpy environment shouldn't be doing any numerical
heavy lifting, we opt for the latter here.
Signed-off-by: Graeme Smecher <gsmecher@threespeedlogic.com>
[yann.morin.1998@free.fr:
- explain why the issue was not found before
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Use pkg-config to find libnet and avoid the following build failure
raised since commit 100ba8351c if
libnet-config is found on the host:
/home/autobuild/autobuild/instance-4/output-1/host/bin/mips64el-buildroot-linux-gnu-gcc -s -o ngrep ngrep.o tcpkill.o -lpcap -lnet -lpcre -L/usr/lib -lnet
mips64el-buildroot-linux-gnu-gcc: ERROR: unsafe header/library path used in cross-compilation: '-L/usr/lib'
While at it, format Upstream tag of other patches
Fixes:
- http://autobuild.buildroot.org/results/05c916162b9c1027cf53f1699a1f5653151098ed
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop no longer used python-aenum runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Peter: drop python-setuptools as pointed out by Marcus Hoffmann]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 78e8f383 "configs/imx8mmpico: bump bsp components to version
tn-kirkstone_5.15.71-2.2.0" bumped components, but forgot to add
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y.
This commit adds it to the defconfig to fix the build.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/5858180248
In file included from tools/imagetool.h:24,
from tools/aisimage.c:7:
include/image.h:1166:12: fatal error: openssl/evp.h: No such file or directory
1166 | # include <openssl/evp.h>
| ^~~~~~~~~~~~~~~
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 7e0e6e3b86 (toolchain/toolchain-external/toolchain-external-bootlin:
update to 2023.11-1) the TestGrubX8664EFI fails with this error:
# efivar -l
traps: efivar[86] trap invalid opcode ip:7fc187f4c7f4 sp:7fff9bbaa930 error:0 in libefivar.so.1.38[7fc187f4c000+16000]
Illegal instruction
This error can be reproduced by installing other packages like "file".
The 2023.11-1 Bootlin toolchains are built for a corei7 CPU [0], which
is in fact a Nehalem CPU; we switched to the new names in commit
653fa001f3 (arch/Config.in.x86: add "newer" names for several Intel
x86 CPU variants). This means that the Bootlin toolchains may use
Nehalem-specific instructions.
The TestGrubX8664EFI test is also setup for BR2_x86_corei7, so our
executables will also contain Nehalem instructions.
However, the default Qemu x86_64 is not guaranteed to emulate all the
instructions specific to Nehalem, causing runtime issues as reported
above.
A similar issue has been fixed in toolchain-builder by adding Nehalem
cpu emulation on the qemu command line [0].
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/6093853712
[0] https://gitlab.com/buildroot.org/toolchains-builder/-/commit/f2b253732b4d1fc5b87badba7c2d48f12a197f76
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[yann.morin.1998@free.fr:
- reword the commit log to explain corei7 -> Nehalem equivalence
- note that the toolchain-builder *and* our test target corei7, thus
Nehalem
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A new kvm-unit-tests version has recently been tagged, so we can use this
version now for buildroot. It ships now with a full version of the GPL v2
license in the LICENSE file, thus we add a hash for that file, too.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libtracefs needs threads resulting in the following build failure since
its addition in commit b1dbd3f679:
In file included from /home/autobuild/autobuild/instance-2/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/include/stdio.h:27,
from ../src/tracefs-instance.c:10:
/home/autobuild/autobuild/instance-2/output-1/host/xtensa-buildroot-linux-uclibc/sysroot/usr/include/features.h:218:5: warning: #warning requested reentrant code, but thread support was disabled [-Wcpp]
218 | # warning requested reentrant code, but thread support was disabled
| ^~~~~~~
../src/tracefs-instance.c:20:10: fatal error: pthread.h: No such file or directory
20 | #include <pthread.h>
| ^~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/e0a8dd0781a1d1824a4cb78f47dcff4055083959
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Also adjust the include path for the device tree. Since Linux 6.5-rc1
(724ba67515 "ARM: dts: Move .dts files to vendor sub-directories"),
sama5d31.dtsi lives in the microchip subdirectory.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Marcus Hoffmann <bubu@bubu1.eu>
[yann.morin.1998@free.fr: add the comment to explain failure is success]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Calling `setup.py` build builds and installs an empty package
after upstream changed their packaging. Calling setuptools via
`python -m build` builds the package correctly.
Signed-off-by: Marcus Hoffmann <bubu@bubu1.eu>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The http://pagesperso-orange.fr service being down,
http://pagesperso-orange.fr/sebastien.godard/ is no longer
accessible (or more precisely serves some HTML junk), meaning that we
currently cannot download the tarball of sysstat from the official
upstream location, and we always fallback to sources.buildroot.net.
This commit therefore updates to use the new upstream location on
github.io. The 12.6.1 release is available there, with the same hash,
so we can just point to the new upstream location.
Fixes:
ERROR: while checking hashes from package/sysstat//sysstat.hash
ERROR: sysstat-12.6.1.tar.xz has wrong sha1 hash:
ERROR: expected: a730982e0c2d4964a0022c1509f3ea0a345402bc
ERROR: got : d64a079729f2ff5b304294d68fbc041a46c4966d
ERROR: Incomplete download, or man-in-the-middle (MITM) attack
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop no longer required python-msgfy runtime dependency.
Drop no longer required python-six runtime dependency.
Add new python-tcolorpy runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The license file 'README' has changed due to the following diff:
- $p3->parse($foo, ProtocolEncoding => 'ISO-8859-1');
- close($foo);
+ $p3->parse($fh, ProtocolEncoding => 'ISO-8859-1');
+ close($fh);
This does not affect the licensing terms.
A 'LICENSE' file was added in 2.47, but it contains the terms of the
wrong license (Artistic 2.0), while this package is under Artistic or
GPL-1.0+. This has been reported upstream at
https://github.com/cpan-authors/XML-Parser/pull/99.
Signed-off-by: Kevin Cui <bh@bugs.cc>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop no longer required python-setuptools runtime dependency.
Drop no longer required python-six runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 8f403f0 "package/micropython-lib: merge with, and install
as part of micropython" brought micropython library within the
package.
This commit improves the micropython runtime test by enabling the
micropython-lib and by also adding a runtime test using one of its
module. We choose to use the gzip module, and check whther decodign q
simple gziped file works; the micropython-lib gzip can only decompress,
so we need to prepare it from the shell.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
fit_check_sign is a tool for verifying fit image signatures, which gets
built if host-uboot-tools is built with fit signature support.
Install it if so.
Signed-off-by: Woodrow Douglass <wdouglass@carnegierobotics.com>
[Peter: reword commit message]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The webrtc-audio-processing package was bumped from version 0.3.1 to
version 1.3 in commit ef0fa986eb which
broke compatibility with the gst1-plugins-bad webrtcdsp plugin.
To fix this backport a commit from upstream adding support for
webrtc-audio-processing version 1.3 to gst1-plugins-bad.
Fixes:
output/build/gst1-plugins-bad-1.22.9/ext/webrtcdsp/meson.build:7:13: ERROR: Dependency "webrtc-audio-processing" not found, tried pkgconfig and cmake
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop no longer required python-six runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Bump version of Linux to 6.6.14 and U-Boot to 2024.01
and also use upstream configs and dts.
Signed-off-by: Ludwig Kormann <ludwig.kormann@ict42.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Release changelog:
- Use default values for IQ calibration correction when the eFuse
register has zero values.
- Fix for "WILC1000 Firmware initialization issue" by updating
the PMU clock switching sequence during firmware initialization.
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* Rework strerror_l() patch by declaring it only in utils.h as a macro
* select BR2_PACKAGE_UTIL_LINUX_LIBUUID since it's now mandatory
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Arnout:
- Preserve author of patch 0001.
- Update .checkpackageignore.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Setting HAPROXY_CFLAGS on the haproxy build command line overrides CFLAGS
which were internally set by the haproxy Makefile.
Among those omitted CFLAGS is -fwrapv. Compiling haproxy without it and
and then running the program results in runtime error:
$ haproxy
FATAL ERROR: invalid code detected -- cannot go further, please recompile!
...
To address this issue, include HAPROXY_CFLAGS in the DEFINE variable instead
of CFLAGS in haproxy.mk.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 363b4ebf1a set DBUS_CPE_ID_PRODUCT
to dbus but this is not needed as DBUS_CPE_ID_PRODUCT will be set to the
package name (i.e. dbus) by default
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
cpe:2.3:a:flex_project:flex has been deprecated in favor of
cpe:2.3:a:westes:flex in October 2023:
<cpe-item name="cpe:/a:flex_project:flex:2.6.4" deprecated="true" deprecation_date="2023-10-06T17:12:20.950Z">
<title xml:lang="en-US">Flex Fast Lexical Analyser 2.6.4</title>
<reference href="https://github.com/westes/flex/releases">Version</reference>
<reference href="https://github.com/westes/flex/">Product</reference>
<cpe-23:cpe23-item name="cpe:2.3:a:flex_project:flex:2.6.4:*:*:*:*:*:*:*">
<cpe-23:deprecated-by name="cpe:2.3:a:westes:flex:2.6.4:*:*:*:*:*:*:*" type="NAME_CORRECTION"/>
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
cpe:2.3:a:netatalk_project:netatalk has been deprecated in favor of
cpe:2.3:a:netatalk:netatalk in September 2023:
<cpe-item name="cpe:/a:netatalk_project:netatalk:3.1.13" deprecated="true" deprecation_date="2023-09-29T11:15:00.340Z">
<reference href="https://sourceforge.net/projects/netatalk/files/netatalk/">Version</reference>
<cpe-23:cpe23-item name="cpe:2.3:a:netatalk_project:netatalk:3.1.13:*:*:*:*:*:*:*">
<cpe-23:deprecated-by name="cpe:2.3:a:netatalk:netatalk:3.1.13:*:*:*:*:*:*:*" type="NAME_CORRECTION"/>
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
JSON Web Tokens are an open, industry standard RFC 7519
method for representing claims securely between two parties.
This Library is used by Asterisk 20.6.0 and newer.
We need to use autotools to install pkgconfig file.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Peter: drop _SOURCE, add host-pkgconf, add to DEVELOPERS]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 8519de517e (package/{glibc, localedef}: security bump to version
glibc-2.38-27-g750a45a783906a19591fb8ff6b7841470f1f5701) correctly mentioned
CVE-2023-4806 in the commit message, but forgot to add an ignore for it.
Fix that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[v1.3.1] - 2023-12-02
---------------------
Fixes mvls to work with kernels 6.2 and onwards.
- mdio: Multiple registers can now be dumped at once, via the generic
dump operation.
- mvls: Relax the driver matching to accept the strings used in
kernels 6.2 and newer.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Until now, micropython-lib was a package that installed v1.9.3, which is
more than 6 years old. This was acceptable since micropython never made
any other official release of the library until v1.20.
Meanwhile, the libraries underwent a reorganization, and they are now
available in a directory structure that cannot be copied directly into
the target. This might explain why v1.9.3 is still present in the
current day buildroot (which comes with micropython v1.22).
As part of the changes made by the micropython project, the libraries
are now released together with the interpreter. They are cloned as a
submodule into the lib/micropython-lib directory, and are present in the
release tarball.
This commit introduces an auxiliary script to collect those libraries
and reorder them into a structure that can then be copied into
/usr/lib/micropython. The script utilizes a module from the tools
directory of the micropython repo.
The helper script is kept as simple as possible, and makes use of
existing micropython tools (used to process manifests) to discover the
list of packages available in micropython-lib. The hope is that by
relying on them, any future changes in directory structure will be
covered by the official "manifestfile.py" tool.
It is to be noted that, even though the manifestfile.py script/module is
part of the micropython package, it is actually written for CPython, and
is not expected to even work when using micropython as an interpreter.
This we do not need to introduce host-micropython to use that tool, and
microython already depends on host-python3 for other parts of the build.
With this commit, micropython-lib is installed (optionally) as part
of micropython, and thus a separate package is no longer needed. The
original config variable name was retained as it fits with the
micropython package "namespace", and thus this is backward compatible
and no legacy handling is needed.
This commit also ensures that the libraries in micropython-lib will
be updated together with newer versions of micropython in the future.
Signed-off-by: Abilio Marques <abiliojr@gmail.com>
[yann.morin.1998@free.fr:
- use if-block in Config.in
- simplify PYTHONPATH
- fix check-package
- reword and reorder parts of the commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
diff LICENSE:
-This software is Copyright (c) 2000 - 2019 by David Rolsky.
+This software is Copyright (c) 2000 - 2024 by David Rolsky.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Updated WHENCE hash due to various new entries for new blobs.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit c07aafa087 (package/Makefile.in: set GIT_DIR=. in {HOST,
TARGET}_MAKE_ENV) added GIT_DIR=. to TARGET_MAKE_ENV (which is included in
TARGET_CONFIGURE_OPTS) to work around issues with packages getting confused
when building in a subdir of the Buildroot git repo.
This unfortunately also causes git commands to fail when
output/host/environment-setup is sourced:
git status
fatal: not a git repository: '.'
So strip GIT_DIR= from TARGET_CONFIGURE_OPTS when generating
environment-setup.
Reported-by: Mircea Gliga <gliga.mircea@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Adds support for the rtl8188fufw firmware variant, for 802.11n, as
covered by the mainline rtl8xxxu kernel driver since Linux 6.2.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This reverts commit 04dfeff624 as it
raises the following build failure because patch has been merged since
version 1.5.104:
Applying 0001-Fix-missing-references.patch using patch:
patching file libuuu/libcomm.h
Reversed (or previously applied) patch detected! Skipping patch.
1 out of 1 hunk ignored -- saving rejects to file libuuu/libcomm.h.rej
patching file uuu/buildincmd.h
Reversed (or previously applied) patch detected! Skipping patch.
1 out of 1 hunk ignored -- saving rejects to file uuu/buildincmd.h.rej
Fixes:
- http://autobuild.buildroot.org/results/bf7b2206261e3385c567ae4359b0379b03161e3a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure without gbm raised since commit
534c22dd60:
Message: dmabuf-feedback requires gbm which was not found. If you rather not build this, drop "dmabuf-feedback" from simple-clients option.
Move the option assignment further down, below all the simple-clients
lists; in Makefile, and because we are usign simply expanded variables,
this is not necessary, but it is easier on us humans when we review the
code.
Also add a comment explaining why the initial list is incomplete.
Fixes:
- http://autobuild.buildroot.org/results/ebbba1d73ceeaacee17fde0c6c853415cd316091
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The NuGet packaging description file is installed as:
$(DEST_DIR)/build/native/hiredis.targets
This is a sprurious file that has nothing to do on a Linux system,
whether that be in host/, staging/, or target/.
Backport an upstream patch to get rid of it.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Fixes the following security issues:
1) CVE-2023-6816 can be triggered by passing an invalid array index to
DeviceFocusEvent or ProcXIQueryPointer.
2) CVE-2024-0229 can be triggered if a device has both a button and a
key class and zero buttons.
3) CVE-2024-21885 can be triggered if a device with a given ID was
removed and a new device with the same ID added both in the same
operation.
4) CVE-2024-21886 can be triggered by disabling a master device with
disabled slave devices.
5) CVE-2024-0409 can be triggered by enabling SELinux
xserver_object_manager and running a client.
6) CVE-2024-0408 can be triggered by enabling SELinux
xserver_object_manager and creating a GLX PBuffer.
For details, see the advisory:
https://lists.x.org/archives/xorg-announce/2024-January/003444.html
Switch to .tar.gz as the announcement mail only contained hashes for that:
https://lists.x.org/archives/xorg-announce/2024-January/003442.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
1) CVE-2023-6816 can be triggered by passing an invalid array index to
DeviceFocusEvent or ProcXIQueryPointer.
2) CVE-2024-0229 can be triggered if a device has both a button and a
key class and zero buttons.
3) CVE-2024-21885 can be triggered if a device with a given ID was
removed and a new device with the same ID added both in the same
operation.
4) CVE-2024-21886 can be triggered by disabling a master device with
disabled slave devices.
5) CVE-2024-0409 can be triggered by enabling SELinux
xserver_object_manager and running a client.
6) CVE-2024-0408 can be triggered by enabling SELinux
xserver_object_manager and creating a GLX PBuffer.
For details, see the advisory:
https://lists.x.org/archives/xorg-announce/2024-January/003444.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Genimage complains about the config using the deprecated gpt option:
INFO: hdimage(sdcard.img): The option 'gpt' is deprecated. Use
'partition-table-type' instead
So change to partition-table-type for consistency with the other configs.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tested-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This changes bumps the version of the genimage package,
which brings in fixes when generating flash images that
reference sparse files, along with other fixes and features.
Signed-off-by: Hudson Ayers <hudson.ayers@getcruise.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The versioning scheme for libwpe uses the middle version number to
indicate stability: an even number for stable releases, odd for
development preview releases. As such, Buildroot should be using
version 1.14.2, which is the most recent of the stable releases.
While at it, add a note in the .mk file about the versioning scheme.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit e88823d667 (package/refpolicy: fix build with smartmontools) added
a 0001-policy-modules-services-smartmon.te-make-fstools-opt.patch patch, but
forgot to put it in the version specific sub directory - Breaking builds
using BR2_PACKAGE_REFPOLICY_CUSTOM_GIT as shown by the TestSELinuxCustomGit
test:
>>> refpolicy RELEASE_2_20200818 Extracting
gzip -d -c /builds/buildroot.org/buildroot/test-dl/refpolicy/refpolicy-RELEASE_2_20200818-br1.tar.gz | tar --strip-components=1 -C /builds/buildroot.org/buildroot/test-output/TestSELinuxCustomGit/build/refpolicy-RELEASE_2_20200818 -xf -
>>> refpolicy RELEASE_2_20200818 Patching
Applying 0001-policy-modules-services-smartmon.te-make-fstools-opt.patch using patch:
patching file policy/modules/services/smartmon.te
Hunk #1 FAILED at 143.
1 out of 1 hunk FAILED -- saving rejects to file policy/modules/services/smartmon.te.rej
make[1]: *** [package/pkg-generic.mk:241: /builds/buildroot.org/buildroot/test-output/TestSELinuxCustomGit/build/refpolicy-RELEASE_2_20200818/.stamp_patched] Error 1
https://gitlab.com/buildroot.org/buildroot/-/jobs/5929796183
Fix it by moving the patch to a versioned sub directory.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
see CVE-2024-0553: Fix more timing side-channel inside RSA-PSK key exchange
see CVE-2024-0567: Fix assertion failure when verifying a certificate chain with a cycle of cross signatures
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The help text is currently copy and pasted from the gstreamer video
player plugin help text. Change it to reflect the text from the
CMakeLists.txt file.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 99a50a8c98 (package/flutter-pi: new package) erroneously made
the gstreamer-based audio plugin depend on GLES, although there is no
such requirement defined in the CMakeLists. This error was likely due to
a copy/paste mistake.
Remove the requirement.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: reword commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure raised since the addition of the package
in commit 6aa1bc3167:
In file included from /home/buildroot/autobuild/run/instance-3/output-1/build/vulkan-loader-1.3.262/loader/extension_manual.h:24,
from /home/buildroot/autobuild/run/instance-3/output-1/build/vulkan-loader-1.3.262/loader/extension_manual.c:23:
/home/buildroot/autobuild/run/instance-3/output-1/host/aarch64-buildroot-linux-gnu/sysroot/usr/include/vulkan/vulkan.h:71:10: fatal error: X11/extensions/Xrandr.h: No such file or directory
71 | #include <X11/extensions/Xrandr.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/55ddfd44393e3bcc2f25bad2f9ecb7e1b142a985
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Tested-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The variable should be a YES/NO value, FALSE is not a valid value.
E.g. the yesno-to-bool cmd does not translate a FALSE value and therefore returns invalid JSON.
Signed-off-by: Maximilian Senftleben <maximilian.senftleben@frogblue-tec.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The MICROPYTHON_MAKE_ENV variable contained two things;
- the comon target environment variables CC, CFLAGS et al. defined in
TARGET_MAKE_ENV,
- the GIT_DIR workaround
Commit 9024e18665 (package/micropython: drop GIT_DIR=. workaround)
totally dropped the assignment to MICROPYTHON_MAKE_ENV, but did not
replace its expansin with TARGET_MAKE_ENV.
This yields build error like:
LINK build-standard/micropython
arm-linux-gcc: ERROR: unsafe header/library path used in cross-compilation: '-L/usr/lib64/../lib64'
Fix this by expanding TARGET_MAKE_ENV in lieu of MICROPYTHON_MAKE_ENV.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
See release notes (https://github.com/redis/redis/blob/7.2.4/00-RELEASENOTES):
================================================================================
Redis 7.2.4 Released Tue 09 Jan 2024 10:45:52 IST
================================================================================
Upgrade urgency SECURITY: See security fixes below.
Security fixes
==============
* (CVE-2023-41056) In some cases, Redis may incorrectly handle resizing of memory
buffers which can result in incorrect accounting of buffer sizes and lead to
heap overflow and potential remote code execution.
Bug fixes
=========
* Fix crashes of cluster commands clusters with mixed versions of 7.0 and 7.2 (#12805, #12832)
* Fix slot ownership not being properly handled when deleting a slot from a node (#12564)
* Fix atomicity issues with the RedisModuleEvent_Key module API event (#12733)
Signed-off-by: Titouan Christophe <titouanchristophe@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 2a8065e "package/postgresql: bump version to 16.1", the
postgresql service fail to start at runtime with an error:
FATAL: could not load library "/usr/lib/postgresql/dict_snowball.so": /usr/lib/postgresql/dict_snowball.so: undefined symbol: CurrentMemoryContext
This is due to the Posgresql autotool configure script trying to
detect whether the toolchain linker needs --export-dynamic or not.
This test is done with a runtime execution of a test program, and
therefore cannot run in cross-compilation. In that case, the
configure script assumes it is not needed. See commit [1], included
in PostgreSQL v16.0.
This commit fixes the issue by forcing the value in _CONF_ENV, as
suggested in an upstream bug report [2]. The package has already a
Kconfig dependency on !BR2_STATIC_LIBS, so the value can be
unconditionally set.
Note that upstream is not considering cross-compiling as supported, and
are not keen on fixing any cross-compiling issue [3].
[1] https://git.postgresql.org/gitweb/?p=postgresql.git;a=commitdiff;h=9db49fc5bfdc0126be03f4b8986013e59d93b91d
[2] https://www.postgresql.org/message-id/79e63515-0f5e-30f4-136d-96e23b1a817d%40posteo.de
[3] https://www.postgresql.org/message-id/1266022.1701958693%40sss.pgh.pa.us
Signed-off-by: Julien Olivain <ju.o@free.fr>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
[yann.morin.1998@free.fr: add upstream ML thread on the issue]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Flutter-engine is by name an engine, i.e. a runtime for applications, a
super-library of sorts. As such, it makes more sense for applications to
select flutter-engine rather than to depend on it.
Change flutter-pi to select flutter-engine.
It also brings flutter-pi on par with ivi-homescreen, another embedder.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: reword commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Remove and create the kernel_blob.bin file in the flutter_assets directory:
When Flutter compiles the source code, it creates the kernel_blob.bin file,
a Dart Kernel Bytecode of the application.
If kernel_blob.bin exists inside the flutter_assets directory, then the
application source code can be extracted with nothing more than apktool.
Not only is this a security risk, it's also redundant and a waste of space.
Removing the kernel_blob.bin file generated for flutter-gallery saves 86M!
Because this package is a reference package, and some applications may check
if the kernel_blob.bin file exists, we also touch a blank kernel_blob.bin
file.
Do not use relative symlinks:
Users may install their applications in any arbitaryt location, not
necessarily in the /usr/share/flutter/${package_name} directory. Because
flutter-gallery is a reference application, using exact symlinks to
icudtl.dat and libflutter_engine.so is preferable.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As the flutter-gallery package is a reference package for users wishing to use
Flutter for their UX with Buildroot, this package must have the correct build
options. Indeed, this package currently starts and runs, but only because of
the 0001-remove-GetStorage.patch. Through testing, flutter-gallery fails to
run during the following scenario:
- The xdg-user-dirs package is ported and present.
- flutter-gallery depends on xdg-user-dirs.
- The 0001-remove-GetStorage.patch file is removed.
After extensive testing and comparing the current build arguments against what
the meta-flutter repository for Yocto passes to all of the applications that
inherit flutter-app, it is clear that handling the dart_plugin_registrant.dart
file is missing from the dart arguments in the flutter-gallery build step.
As the documentation for the dart_plugin_registrant.dart file is nonexistent
in any official documentation. However, there is a comment from an issue on
the official dart-lang/sdk page on Github that explains what this file is
(and refers to the Dark SDK source code instead of official documentation.)
From https://github.com/dart-lang/sdk/issues/52506#issuecomment-1562806787:
```
The dart_plugin_registrant.dart is a very special file. It's neither included
in the Dart app nor any dependent packages. Rather it's an artificially
created file by the flutter tools. It contains logic to run plugin
registration logic.
A flutter build will eventually compile the Dart application where it will add
<dir>/.dart_tool/flutter_build/dart_plugin_registrant.dart as an extra source
file (see here). Additionally it will also inject that uri as a constant into
Dart source code via a -Dflutter.dart_plugin_registrant=<uri>.
Once the app runs it will access the
package:flutter/src/dart_plugin_registrant.dart:dartPluginRegistrantLibrary
constant and use it to look up the library object and then invoke the plugin
registration logic.
```
Now that what the dart_plugin_registrant.dart does is understood, we need to
pass the following to the dart binary during the flutter-gallery build step:
-Dflutter.dart_plugin_registrant=file://[...]/dart_plugin_registrant.dart:
Injects a file containing the logic to run the plugin registration logic as
a constant into the flutter-application source code.
--source file://$(@D)/.dart_tool/flutter_build/dart_plugin_registrant.dart:
Adds the dart_plugin_registrant.dart file as a source file to compile.
--source package:flutter/src/dart_plugin_registrant.dart:
Binds the plugin implementation to the platform interface based on the
configuration of the app's pubpec.yaml, and the plugin's pubspec.yaml.
The native_assets.yaml file provides the native-assets mapping for
@Native external functions. The flutter-gallery package has no functions
marked as @Native; however, calling "flutter build bundle" creates a blank
template "native_assets.yaml" file, which is safe to include in the build.
This line, while not necessary for flutter-gallery, may be helpful for other
users who use @Native external functions in their applications, and this
example makes porting other applications quicker and easier.
Finally, there is a known issue when using the dart_plugin_registrant.dart
file outlined here: https://github.com/flutter/flutter/issues/137972.
To summarize: If a user fails to pass the --obfuscate flag to gen_snapshsot
when using the dart_plugin_registrant.dart file, their application may fail
to start. One such application is Gallery, which I have independently verified.
As such, pass the --obfuscate flag to gen_snapshot to ensure that
flutter-gallery properly starts when building with the additional
dart_plugin_registrant.dart arguments above.
However, I acknowledge that the obfuscate flag hides function and class names
in compiled Dart code, and there are some cases when a user should avoid using
the flag. For example, when using the runtimeType API:
https://api.flutter.dev/flutter/dart-core/Object/runtimeType.html. However,
this is not the case with flutter-gallery, and the --obfuscate flag is needed.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: restore FLUTTER_RUNTIME_MODES]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
To make the next patch easier to understand, add a configure step to the
flutter-gallery.mk file. The `$(HOST_FLUTTER_SDK_BIN_FLUTTER) build bundle`
command is placed in the configure step because it generates several files
needed for the flutter_gen_snapshot tool to generate the target .so file.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The canonical name for the 'pub' action is 'pub', while 'packages' is
just an alias. Switch to using the canonical name.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: split off to its own commit]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As Yann mentioned in commit 9d8497e79d, a
dependency on a glibc toolchain implies a dependency on
BR2_TOOLCHAIN_HAS_THREADS_NPTL. As such, remove the dependency from
package/flutter-engine/Config.in.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The current depot-tools version is from Jul 13 2023, and there is a bug
where when building with PPD enabled, building a Flutter application on
my laptop running Fedora 39 or even in the Debian 11 container fails due
to permission issues when running rsync such as:
/usr/bin/sed: couldn't open temporary file [...]/output/per-package/flutter-gallery/host/share/flutter/sdk/.vpython-root/0e1e32/lib/python3.8/sed763MrF: Permission denied
make: *** [package/pkg-generic.mk:267: [...]/output/build/flutter-gallery-2.10.2/.stamp_configured] Error 123
After several hours of attempting to find the exact cause of the issue
by parsing git logs of the depot_tools repository and cross-referencing
bugs on https://bugs.chromium.org/p/chromium/issues I am unable to
determine the exact reason why the problem occurs or the exact commit
that fixes the issue.
However, updating depot-tools does indeed fix the issue, and looking at
the source code between 4e87f5bf and 8d14454b shows improvements to
several bash scripts, such as gclient, vpython3, and spid. All of which
could be culprits of this bug. As flutter-engine is the only package
that uses host-depot-tools, it is safe to update.
This permission bug is present on PPD and normal builds, but causes a
build to crash only on PPD because of rsyncing. On non-ppd builds, the
bug only causes some minor annoyance when trying to run `make clean`
because permission denials crop up when trying to remove the
.vpython-root directory.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr:
- copy the cover-letter description as commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The keyboard manager plugin is also missing the flutter/standard_method_codec.h
header.
- Add shell/plugins/keyboard_manager/keyboard_manager.h to the patch.
- Rename the patch to
0001-add-missing-headers-to-the-audio-players-and-keyboar.patch
Upstream pull request updated as well.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When running the command "flutter pub get," the plugins are stored in the
pub-cache directory along with their sha256sum hashes. The default location of
the pub-cache directory is current $(HOST_DIR)/share/flutter/sdk/.pub-cache,
which is not an acceptable choice by default because every plugin is
re-downloaded during every build of a flutter application either during a new
build or when building with the per-package-directory option enabled.
Furthermore, keeping the pub-cache in its current location prevents users from
committing the pub-cache directory to git for faster rebuilds of a
Buildroot-based system, as users cannot store the pub-cache for later use.
To fix the above issue completely, the following two changes must occur:
- Change the hard-coded Flutter pub-cache location to
$(DL_DIR)/br-flutter-pub-cache.
- Remove the `rm -rf $(HOST_FLUTTER_SDK_BIN_SDK)/.pub-cache` and the
associated comment about why the build system removes the .pub-cache
directory. After further research, the help text of the precache command
reads, "Populate the Flutter tool's cache of binary artifacts."
The current reasoning listed in the comments is not accurate for a
the following reasons:
1. We do not want to remove their directory if users already have a pub
cache they have symlinked to.
2. If the flutter-sdk-bin package previously set up the pub-cache, then
the pub-cache directory is set up with the options we want, and there
is no reason to remove the pub-cache directory.
Note that upstream considers it safe to have multiple instances of
readers/writers to the pub cache concurently, which is a situation that
can happen when two flutter-based pacakges are going to be built in
parallel. There have been reports upstream [0] [1] [2] where concurrency
was an issue, and they have always been fixed [3] [4] (or considered
fixed already). So we can assune that, if the conncurrent ccess to the
shared pub-cache causes issues, that will be an upstream bug that will
get solved.
If that turns out to be an unsolvable problem, we'll still have the
option to run the pub-get commands under flock.
[0] https://github.com/dart-lang/pub/issues/1178
[1] https://github.com/dart-lang/pub/issues/3404
[2] https://github.com/dart-lang/pub/issues/3420
[3] https://github.com/dart-lang/pub/issues/1178#issuecomment-1006489414
[4] https://github.com/dart-lang/pub/issues/1178#issuecomment-1007273739
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: add blurb about concurrent access]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The BCM2712 of the RaspberryPi 5 supports for 16KB page size.
This adds support for 16 KB on ARM64.
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Buildroot commit c50e9c21f0 initially
added the package onevpl (meanwhile renamed to libvpl) and forgot to
add all dependencies of BR2_PACKAGE_LIBDRM_INTEL.
Fixes:
http://autobuild.buildroot.org/results/8fa/8fa0f2cd7a027d3d8fae56125621b0b814e132da/
Note: BR2_PACKAGE_LIBDRM_HAS_ATOMIC is always true on x86, but it is
propagated for consistency with the actual dependencies of libdrm-intel.
Notes: this means the current comntition in the .mk is correct in
practice, even if it does not account for the atomic case on x86.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
[yann.morin.1998@free.fr: add notes]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As found out by Yann E. Morin in [1], apcupsd configure script is ugly,
and uses gcc to do the link line-wrapping which will raise the following
build failure with gcc 13:
/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/powerpc64le-buildroot-linux-gnu/13.2.0/../../../../powerpc64le-buildroot-linux-gnu/bin/ld: /home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/powerpc64le-buildroot-linux-gnu/13.2.0/../../../../powerpc64le-buildroot-linux-gnu/lib/../lib64/libsupc++.a(eh_alloc.o): in function `std::basic_string_view<char, std::char_traits<char> >::compare(unsigned long, unsigned long, char const*, unsigned long) const':
eh_alloc.cc:(.text._ZNKSt17basic_string_viewIcSt11char_traitsIcEE7compareEmmPKcm[_ZNKSt17basic_string_viewIcSt11char_traitsIcEE7compareEmmPKcm]+0x44): undefined reference to `std::__throw_out_of_range_fmt(char const*, ...)'
It will also raise the following build failure on sparc/arc:
/home/autobuild/autobuild/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arceb-snps-linux-uclibc/9.2.1/../../../../arceb-snps-linux-uclibc/bin/ld: /home/autobuild/autobuild/instance-3/output-1/host/arceb-buildroot-linux-uclibc/sysroot/lib/libsupc++.a(eh_throw.o): in function `__exchange_and_add_dispatch':
/SCRATCH/arcjenkins2/slaves/ru20-custom-arcgnu2/workspace/arcoss_verification/arc_gnu_toolchain_release/arc_gnu_toolchain_release/bd-uclibceb/gcc-stage2/arceb-snps-linux-uclibc/libstdc++-v3/include/ext/atomicity.h:82: undefined reference to `__gnu_cxx::__exchange_and_add(int volatile*, int)'
/home/autobuild/autobuild/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arceb-snps-linux-uclibc/9.2.1/../../../../arceb-snps-linux-uclibc/bin/ld: /SCRATCH/arcjenkins2/slaves/ru20-custom-arcgnu2/workspace/arcoss_verification/arc_gnu_toolchain_release/arc_gnu_toolchain_release/bd-uclibceb/gcc-stage2/arceb-snps-linux-uclibc/libstdc++-v3/include/ext/atomicity.h:82: undefined reference to `__gnu_cxx::__exchange_and_add(int volatile*, int)'
Instead of trying to patch the configure script as advocated by
Yann E. Morin, set LD to TARGET_CXX as:
- this solution is quicker
- usptream is dead (last release in 2016)
- this solution has already been used in other packages (nodejs, zmqpp)
[1]: https://patchwork.ozlabs.org/project/buildroot/patch/20200812171821.2517-1-Evgeniy.Didin@synopsys.com/
Fixes:
- http://autobuild.buildroot.org/results/6096c3ddc5edf3204635c2c90246c2e8c8e074e7
- http://autobuild.buildroot.org/results/d8a/d8a3ab31c5b86871c7e1117f4ffa7b6cedfcb7e0/build-end.log
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- updated LICENSE hash because of changed link to fmt's license
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add support of Amlogic bluetooth firmware.
Signed-off-by: Yang Li <yang.li@amlogic.com>
[yann.morin.1998@free.fr:
- add license file and its hash
- move to BT submenu
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Although similar in name, they use different kernel driver (with the
exception of common Bluetooth driver, but the firmware file is quite
large anyway, so it's worth having the possibility to be specific).
Signed-off-by: Jan Čermák <sairon@sairon.cz>
[yann.morin.1998@free.fr:
- add hash for license file
- reorder alphabeticlly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add files for rtw89 driver and extend help text for rtw88 option a bit.
Signed-off-by: Jan Čermák <sairon@sairon.cz>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop patch which is now upstream.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Peter: drop patch from .checkpackageignore]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
All in-tree configs with the uboot bootloader use a custom version,
so this patch is mostly for the menuconfig default uboot version
Signed-off-by: Flávio Tapajós <flavio.tapajos@newtesc.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tested on a Raspberry PI4 with a SNOM 360 and a SIP Trunk to Easybell.
Attention: chan_sip is deprecated, use chan_pjsip instead.
For chan_pjsip you need to enable openssl otherwise the module will not
load.
Patches 0005 and 0006 are applied upstream.
Remove unused configure options:
--without-curses
--without-isdnnet
--without-misdn
--without-nbs
--without-oss
--without-sqlite
--without-suppserv
--without-termcap
--without-tinfo
--without-vpb
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The condition checking whether the webrtc-audio-processing package is
enabled, added in commit
3ccd3b4c38 ("package/pipewire: bump to
version 0.3.32") is obviously incorrect, and can never be true.
Fix the condition to use the correct variable instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Custom Northstar images allow installing (flashing) them using vendor UI
or CFE bootloader.
The change of DTS files paths ("broadcom/" prefix introduction in Linux
6.5+) prevented post script from generating them.
Adjust post-image.sh to deal with new paths.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even though Northstart platform support is well upstreamed it may always
happen that some kernel change affects/breaks something. It's a good
practice to specify fixed versions for kernel & Linux headers.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 4.14.x series is now EOL upstream, so drop the linux-headers option
and add legacy handling for it.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that profile mode is an option for the flutter-engine package, the logic
in package/flutter-sdk-bin/flutter-sdk-bin.mk is no longer sufficient.
The profile/debug/release logic was inspired by:
https://github.com/meta-flutter/meta-flutter/blob/kirkstone/conf/include/
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr:
- make FLUTTER_ENGINE_RUNTIME_MODE_PROFILE win over
BR2_ENABLE_RUNTIME_DEBUG
- don't set variables to empty string
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A number of packages try to detect if they are running in a git repo and run
git describe at build time instead of using the hard coded version number if
it succeed, leading to odd version numbers as they end up picking up the
Buildroot git version if building inside a Buildroot git checkout, E.G.:
rauc --version
rauc 2023.11-562-g9c954953b4+
This is because rauc builds with meson and uses vcs_tag:
https://github.com/rauc/rauc/blob/v1.11/meson.build#L168-L171https://mesonbuild.com/Reference-manual_functions.html#vcs_tag
Another example is micropython, where we already work around it by passing
GIT_DIR=.
In the context of Buildroot the packages are never built in their own git
checkout, so pass GIT_DIR=. to ensure git doesn't walk back up the
directory tree and finds the Buildroot git repo, which fixes the rauc (and
similar) issues.
>>> rauc 1.11 Building
..
ninja: Entering directory `/home/peko/source/buildroot/output-rauc/build/rauc-1.11//build'
[1/29] Generating version.h with a custom command
fatal: not a git repository: '.'
cat output-rauc/build/rauc-1.11/build/version.h
#define PACKAGE_STRING "rauc 1.11"
#define PACKAGE_VERSION "1.11"
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Building for i386 raises the following build failure since the additon
of the package in commit 3e4b479f39:
Makefile:23: *** "The architecture i386 isn't supported". Stop.
Setting ARCH=x86 won't work either as it results in the following build
failure:
compel/arch/x86/plugins/std/memcpy.S: Assembler messages:
compel/arch/x86/plugins/std/memcpy.S:20: Error: bad register name `%rdi'
compel/arch/x86/plugins/std/memcpy.S:21: Error: bad register name `%rdx'
compel/arch/x86/plugins/std/memcpy.S:22: Error: `shrq' is only supported in 64-bit mode
compel/arch/x86/plugins/std/memcpy.S:24: Error: `movsq' is only supported in 64-bit mode
compel/arch/x86/plugins/std/syscalls/syscall-common-x86-64.S: Assembler messages:
compel/arch/x86/plugins/std/syscalls/syscall-common-x86-64.S:13: Error: bad register name `%rcx'
compel/arch/x86/plugins/std/syscalls/syscall-common-x86-64.S:19: Error: bad register name `%rax'
Fixes:
- http://autobuild.buildroot.org/results/94cc463762b57efacf743d107a8dda7660a995a3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Buildroot only offers two possible runtime modes for Flutter that are
automatically selected based on what the user has selected:
- debug if BR2_ENABLE_RUNTIME_DEBUG is enabled.
- release if BR2_ENABLE_RUNTIME_DEBUG is not enabled.
However, Flutter also offers the profile runtime mode option.
From https://docs.flutter.dev/testing/build-modes:
```
"Use profile mode when you want to analyze performance."
What is profile mode?
Some debugging ability is maintained in profile mode, which is enough to
profile your app's performance. Profile mode is turned off on the emulator
and simulator because their behavior does not represent actual performance.
```
As Flutter projects can be heavy and consume many resources, it is necessary
to allow users developing a Flutter application to profile their application
during development.
This patch introduces a new choice: FLUTTER_ENGINE_RUNTIME_MODE_PROFILE.
If unselected, the global option BR2_ENABLE_RUNTIME_DEBUG continues to
determine whether to build Flutter in release or debug mode. This new option
may confuse some users who wonder where the release and debug options are, so
the help menu section under the FLUTTER_ENGINE_RUNTIME_MODE_PROFILE option
explains that the global BR2_ENABLE_RUNTIME_DEBUG option controls the debug
and release modes.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr:
- move plugin description, from commit log, to help text
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
There are 14 commits between the current version of d62e84 and f34d7b.
Some highlights include:
- egl_gbm_render_surface: fix initialization of is_locked:
- src/egl_gbm_render_surface: properly fallback to surface with no modifier
(so we can drop our patch)
- user input: store mt positions separately
- video player: Transition to READY before NULL
- check all malloc returns
In addition, commit 6a28738 introduces the charset_converter, which is a
platform-side implementation of the charset_converter plugin found here:
https://pub.dev/packages/charset_converter
As this is a new plugin, disable it; a follow-up commit will add an
option to enable it.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently the tests TestRust and TestRustBin do check for vendoring by
requiring package ripgrep to be built but only if the download
directory is already empty, otherwise the existing contents of the download
directory will be reused and therefore not be redownloaded.
This new test will only verify that the required packages are downloaded
and vendored correctly without doing a runtime test. It does so by setting a
path to a folder "dl" inside the build directory (output-directory/testname/)
and then setting the environment variable BR2_DL_DIR to this path before the
build starts. BR2_DL_DIR is not set in the config options because it would be
overridden by the user's own environment variable if defined. This code was
essentially copied from the file test_gitforge.py which was added in commit
1ca6ab6ace
We want the package ripgrep to be built since it requires vendoring
directly. Additionally we want the package python-cryptography to be
built because it has rust dependencies and therefore indirectly also requires
vendoring.
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Signed-off-by: Antoine Coutant <antoine.coutant@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 768f9f80f6 (support/download: generate even more reproducible
tarballs) causes non-reproducibility in tarballs we previousy
generated, especially the archives for two cargo-vendored packages,
ripgrep and sentry-cli.
The cause is that those two pakcages eventually vendor a file that has
the u+x bit set, but is otehrwise go-x. With 768f9f80f6, the files are
now go+x, so the hash for those generated archives has changed.
Besides, that commit was wrong: it did not account for the 'r' bit for
go part, leaving some non-reproducibility still unaccounted for.
So, to generate really reproducible archives, we would need to fix that
read bit as well, and that has the potential to affect all the archives
we generated so far. If we wanted to do so, we'd need a way to version
all generated archives, like we do for git and svn, but now for all the
different CVSes, as well as for all the vendoring post-processes.
For 768f9f80f6, all that was of conern was the working copies of CVSes
(i.e. git, svn, cvs...) that we cache in the Buildroot download dir, not
the temporary files during post-processing. Indeed, in that latter case,
the user has virtually no way to mangle with the mode of the
intermediate extract before repack.
And we do have a big fat warning that users should not attempt to meddle
with the git tree that Buildroot caches.
As 768f9f80f6 however demonstrates, is that it took quite a long time
between the introduction of the git caching, and the time someone
eventually discovered they could meddle in there. This shows that the
issue it not actually critical in most setups.
Also, the tar manual [0] hints at a better solution to handle
reproducibility, which even avoids touching the files on disk which is
even nicer:
‘--mode='go+u,go-w'’
Omit irrelevant information about file permissions.
If we were to actually handle the mode bit for reproducibility, we'd
need to:
- introduce archive versioning for all download backends and
prost-processing
- use the tar officially suggested method
So, revert that change, as it was incomplete, was not really fixing much
issues, and causes actual issues.
This reverts commit 768f9f80f6.
[0] https://www.gnu.org/software/tar/manual/tar.html#Reproducibility
Thanks to Vincent and Arnout for pointing at the tar manual.
Reported-by: Antoine Coutant <antoine.coutant@smile.fr>
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Antoine Coutant <antoine.coutant@smile.fr>
Commit 6d163e12a4 (package/udev: move render and sgx to
package/systemd) moved the sgx group creation to the systemd package because
eudev at that time did not reference it. This changed in eudev 3.1.12 with
commit a8ffcd1b985fb4 (rules/50-udev-default.rules: fix issue 160) so move
it back to get rid of a warning from udevd:
udevd[303]: specified group 'sgx' unknown
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Upstream changed their --{en,dis}able-telemetry option, and replaced it
with --{en,dis}able-analytics.
A subsequent look at the rest of the file including the logic around the
change of the name of the above option provides no other elevant changes
that would apply to this package update.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
flutter-gallery was erroneously placed under the "Graphic libraries"
section of the menu "Graphic libraries and applications (graphic/text)"
menu. However, as flutter-gallery is a flutter-based graphical user
interface (GUI) application, it is better suited to be placed under the
"Graphic applications" section.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
flutter-pi was erroneously placed under the "Graphic libraries" section
of the menu "Graphic libraries and applications (graphic/text)" menu.
However, as flutter-pi is an application that runs graphic applicaitons
it is better suited to be placed under the "Graphic applications"
section.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Let's drop local patch thas has been upstreamed but another one to fix
linking failure due to meson and Makefile unalignment. Also, now libtracefs
samples require pthread, but we don't want samples to be built to save
target size and reduce dependencies counot, so let's disable it by setting
meson samples variable to false in LIBTRACEFS_CONF_OPTS.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr: do an actual backport now it's upstreamed]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a choice to allow using the Wayland variant of the r6p2 Mali driver.
When selected, the package is marked as provider for libgbm as
libMali.so includes the symbols and a libgbm.so symlink is installed;
and both BR2_PACKAGE_HAS_{LIBGBM,LIBEGL_WAYLAND} are selected
accordingly.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Much like flutter-pi, this package is a Flutter embedder used to run Flutter
applications. However, unlike Flutter-pi, this package requires a Wayland
compositor to run, which flutter-pi does not support. Furthermore, flutter-pi
lacks several plugins and features that ivi-homescreen supports, such as:
- Dart VM console redirection
- DLT logging
- Accessibility
- Compositor region
- Compositor surface
- Desktop Window
- Go Router
- Isolate
- Keyboard Manager
- Layer Playground
- Mouse Cursor
- PackageInfo
- Platform
- Platform Views
- Restoration
The following plugins and options are hardcoded to off:
- Crash handler: Requires a newer version of sentry-native.
- File selector: Requires the zenity package.
- Firebase-core: Requires the firebase-cpp-sdk package.
- URL Launcher: Requires a runtime-dependency on xdg-open.
- BUILD_TEXTURE_NAVI_RENDER_EGL: Failes to build.
- BUILD_TEXTURE_TEST_EGL: Fails to build.
- ENABLE_AGL_CLIENT: Used for Automitve Grade Linux (AGL).
The ENABLE_XDG_CLIENT=ON option is a requirement to run Flutter apps.
If this option is disabled, ivi-homescreen segfaults when starting an
application.
Finally, there is a need for a patch that fixes the audio-players plugin:
If the audio-players plugin is the only plugin selected, several compilation
errors occure because of undeclared definitions, as the standard_method_codec.h
header file is missing.
Upstream-status: https://github.com/toyota-connected/ivi-homescreen/pull/133
This package has been tested on a x86_64 host with an AMD Ryzen 9 6900HS
with Docker 24.0.5:
- The following distributions:
- Fedora 39: Host system
- Ubuntu 22.04: Docker
- Debian 11: Docker
- The following targets:
- BR2_aarch64
- BR2_arm
- BR2_x86_64
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr:
- propagate BR2_PACKAGE_HOST_FLUTTER_SDK_BIN_ARCH_SUPPORTS to comments
- drop NPTL, implied by glibc
- reorder dependencies in a more logical way
- reorder comments
- drop undefined BR2_PACKAGE_IVI_HOMESCREEN_HAS_CLIENT
- grammar ("for to change")
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure on sparc64 raised since bump to version
0.85 in commit 470f0fb1ec:
error[E0308]: mismatched types
--> /home/autobuild/autobuild/instance-7/output-1/build/nushell-0.85.0/VENDOR/uucore/src/lib/features/fs.rs:121:16
|
111 | pub fn number_of_links(&self) -> u64 {
| --- expected `u64` because of return type
...
121 | return self.0.st_nlink;
| ^^^^^^^^^^^^^^^ expected `u64`, found `u32`
|
help: you can convert a `u32` to a `u64`
|
121 | return self.0.st_nlink.into();
| +++++++
For more information about this error, try `rustc --explain E0308`.
error: could not compile `uucore` (lib) due to previous error
Fixes:
- http://autobuild.buildroot.org/results/f9f0287a8e39c65895014ca513ed25071f020add
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Drop patch (not needed anymore)
- Switch to meson-package
- libabseil-cpp is a mandatory dependency
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While updating ARC GNU toolchain version (see [1]) we unintentionally
got rid of "0001-poison-system-directories.patch" which still makes
sense.
Even though one may think that we do not need these Binutils patches
because we do "poisoning" of system directories in toolchain wrapper,
but these wrappers don't exist for tools originated from Binutils, only
for gcc, g++ etc.
So we need to keep that patch still, sorry.
[1] https://git.buildroot.net/buildroot/commit/?id=045ab73702b8bc09f94ca1f3b8e5bf3acb0b0843
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure raised since the addition of the package
in commit ea45b95c0e:
/home/autobuild/autobuild/instance-12/output-1/build/python-grpcio-1.60.0/setup.py:40: DeprecationWarning: pkg_resources is deprecated as an API. See https://setuptools.pypa.io/en/latest/pkg_resources.html
import pkg_resources
Traceback (most recent call last):
File "/home/autobuild/autobuild/instance-12/output-1/build/python-grpcio-1.60.0/setup.py", line 289, in <module>
if check_linker_need_libatomic():
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/autobuild/autobuild/instance-12/output-1/build/python-grpcio-1.60.0/setup.py", line 223, in check_linker_need_libatomic
cpp_test = subprocess.Popen(
^^^^^^^^^^^^^^^^^
File "/home/autobuild/autobuild/instance-12/output-1/host/sparc64-buildroot-linux-gnu/sysroot/usr/lib/python3.11/subprocess.py", line 1026, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/home/autobuild/autobuild/instance-12/output-1/host/sparc64-buildroot-linux-gnu/sysroot/usr/lib/python3.11/subprocess.py", line 1950, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'no'
Fixes:
- http://autobuild.buildroot.org/results/58ac25b4e426712269c5fc144121c955b714c760
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libopenssl needs perl Math::BigInt for s390x asm to avoid the following
build failure since commit a5cacb6308:
Can't locate bigint.pm in @INC (you may need to install the bigint module) (@INC contains: /home/buildroot/autobuild/instance-0/output-1/build/libopenssl-3.2.0/crypto/poly1305/asm/../.. /home/buildroot/autobuild/instance-0/output-1/host/lib/perl /usr/local/lib64/perl5/5.36 /usr/local/share/perl5/5.36 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5) at /home/buildroot/autobuild/instance-0/output-1/build/libopenssl-3.2.0/crypto/poly1305/asm/../../perlasm/s390x.pm line 16.
BEGIN failed--compilation aborted at /home/buildroot/autobuild/instance-0/output-1/build/libopenssl-3.2.0/crypto/poly1305/asm/../../perlasm/s390x.pm line 16.
Fixes:
- http://autobuild.buildroot.org/results/986cb07d368c7214ffbc9d60c378e7ac00797f00
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop python-chardet/python-cchardet runtime dependencies.
Drop python-typing-extensions runtime dependencies.
Add new python-brotli runtime dependency.
Add new python-frozenlist runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The qwt package is a Qt5 package, not a Qt6 one, so it can't benefit
from the target-finalize hook that was introduced in e29fcde4ba
(package/qt6base: remove $(TARGET_DIR)/usr/mkspecs in target-finalize).
Indeed, the original patch was hard-coding the mkspecs removal directly
in the target-finalize recipe, and that was made a hook as a last-minute
change when applying, without realising that qwt was qt5-based.
So, reinstate the mkspecs removal as an ad-hoc fixup in the qwt package.
This actually partially reverts commit e29fcde4ba (package/qt6base:
remove $(TARGET_DIR)/usr/mkspecs in target-finalize).
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure raised because madplay uses mad_f_mul
which is defined in usr/include/mad.h (installed by libmad which has
been fixed by a similar workaround in commit
0aaadd525f, unfortunately the fix works
for compiled code, not mad_f_mul define):
/tmp/cc5SGGoU.s:102: Error: selected processor does not support `smull r8,r9,r2,r4' in Thumb mode
Fixes:
- http://autobuild.buildroot.org/results/0c0955d4f6726b50cad721f4d3437dabde316e70
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Use official tarball
- Update hash of license file (some packages have been added or removed
but the list of licenses is the same)
- Fix CVE-2023-7158: A vulnerability was found in MicroPython up to
1.21.0. It has been classified as critical. Affected is the function
slice_indices of the file objslice.c. The manipulation leads to
heap-based buffer overflow. It is possible to launch the attack
remotely. The exploit has been disclosed to the public and may be
used. Upgrading to version 1.22.0 is able to address this issue. It is
recommended to upgrade the affected component. The identifier of this
vulnerability is VDB-249180.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Drop patch (already in version) and so also drop autoreconf
- The sudoers plugin has been modified to make it more resilient to
ROWHAMMER attacks on authentication and policy matching. This
addresses CVE-2023-42465.
https://www.sudo.ws/releases/stable/#1.9.15p5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update site to avoid redirections (HSTS, etc.)
Version 5.0.3 - 12/17/2023
A memory leak fix in the prior version wasn't applied correctly, resulting
in an invalid memory access causing a crash. Bug fixed.
Version 5.0.2 - 11/8/2023
Fixed bug that caused crash when a CLIENT_KEY arrived out of order
Fixed option handling on Windows when an argument is missing
https://sourceforge.net/projects/uftp-multicast/files/Changes.txt/download
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure raised since the addition of the package
in commit 1474f1b34b:
../src/event-plugin.c:10:10: fatal error: dlfcn.h: No such file or directory
10 | #include <dlfcn.h>
| ^~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/7802d1ad00293147edda39683f6d3f614dd48263
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: only list first-level inherited deps]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This usage of <PKG>_NAME was introduced in commit f9e9c6349a
("package/rng-tools: bump to 6.7"). No other package uses <PKG>_NAME
this way.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We switched to new upstream since commit f9e9c6349a
("package/rng-tools: bump to 6.7"). Update the website URL as well.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Historically, Buildroot has defaulted to -Os as the gcc optimization
flags. However, this default is probably not the most appropriate
anymore, and this commit therefore changes the default to -O2.
Here are some arguments in favor of this change:
- Most Buildroot users use Buildroot for platforms that have a
reasonable amount of storage, and the difference between -Os and -O2
in terms of code size is no longer as significant compared to the
size of storage available on average embedded Linux devices
typically found these days.
- -Os can have a pretty bad performance impact, compared to -O2.
- -Os is much less widely tested than -O2. For example, with recent
versions of gcc, there are parts of Qt5 that segfault when compiled
with -Os and work perfectly fine with -O2. Yes, it's a compiler bug
that should be fixed, but in the mean time, having a default that's
more widely used/tested makes sense.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure without neon raised since bump to
version 1.4.0 in commit 2f7f8f3813 and
https://github.com/jgaeddert/liquid-dsp/commit/c821187dd9af2758c8e3c82e95eaf041b8ac81a0:
/home/peko/autobuild/instance-0/output-1/host/bin/arm-none-linux-gnueabi-gcc -std=gnu11 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -D_FORTIFY_SOURCE=2 -ffast-math -mcpu=cortex-a7 -mfloat-abi=hard -mfpu=neon-vfpv4 -Wall -fPIC -Wno-deprecated -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I. -Iinclude -c -o src/audio/src/cvsd.o src/audio/src/cvsd.c
In file included from /home/peko/autobuild/instance-0/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/features.h:388:0,
from /home/peko/autobuild/instance-0/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/stdlib.h:24,
from src/libliquid.c:25:
/home/peko/autobuild/instance-0/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/gnu/stubs.h:10:29: fatal error: gnu/stubs-hard.h: No such file or directory
# include <gnu/stubs-hard.h>
^
Indeed, upstream considers that NEON is available on all ARM platforms,
and their configure.ac contains that code snippet:
239 arm|armv7*|armv8*)
240 # assume neon instructions are available
241 # TODO: check for Neon availability
242
243 # ARM architecture : use neon extensions
Fixes:
- http://autobuild.buildroot.org/results/36b3c2220c462e7a20262fd1b9064d9aeb6c9ec4
- http://autobuild.buildroot.org/results/881826b4b6c141e59a0da2d7d1ad55d3709fdb95
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
- refactor with LIQUID_DSP_SIMDOVERRIDE
- add comment about --disable-simdoverride
- extend commit log with upstream code snippet
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
libaio is only needed for standard install
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: fix check-package]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
trace-cmd's dependencies 'libtracefs' and 'libtraceevent' were split
into dedicated projects, maintained outside of trace-cmd.
This release, on top of bumping the version, adds this new dependencies.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
[Giulio: bump to version 3.1.7]
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr: alphabetical order in dependencies]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The RealTime Linux Analysis tool includes a set of commands that relies
on the osnoise and timerlat tracers from the ftrace kernel subsystem,
allowing to analyze the lantency sources coming from the hardware and
the kernel itself.
This tool was introduced in v5.17 but until v5.19 it relied on libprocps
that has been deprecated soon. So let's make it available for v5.19+.
Rtla relies on libtracefs and libtraceevent, although libtraceevent itself
is already a dependency for libtracefs.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
[Giulio: fix install on recent Linux versions]
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Andreas: deal with Linux Fixups, musl, SSP]
Signed-off-by: Andreas Ziegler <br015@umbiko.net>
[yann.morin.1998@free.fr: reword and extend help text]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Introduce the libtracefs library, that is used to be bundled with the
trace-cmd tool. This library is now used by several tools and libraries
such as trace-cmd and rtla, and is used as an interface to the ftrace
kernel subsystem through tracefs.
To build with meson, this package requires to disable documentation
generation, and since this is not possible add a local patch pending
upstream that adds -Ddoc=false support to libtracefs.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
[Giulio:
- bump version to 1.7.0 and add hash file
- move to meson build system
]
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Introduce the libtraceevent library, that is used to be bundled with the
trace-cmd tool. This library is now used by several tools and libraries
such as trace-cmd, libtracefs and rtla.
To build with meson, this package requires to disable documentation
generation, and since this is not possible add a local patch pending
upstream that adds -Ddoc=false support to libtraceevent.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
[Giulio:
- bump version to 1.7.3 and add hash file
- move to meson build system
]
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr:
- bump to 1.8.1, drop patch applied upstream
- add "homepage" to help text
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
--{dis,en}able-avahi is unrecognized since bump to version 2.3.3op2 in
commit 8cf034ab0f (which switched upstream
location from apple to openprinting):
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --disable-dependency-tracking, --enable-ipv6, --disable-nls, --disable-systemd, --disable-avahi
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With [1], [2] & [3] we made sure Buildroot packages get built with
proper MMU page size assumed. This was done nicely through insertion of
required flags into the toolchain wrapper so that there's no need to
pass these flags to each and every package separately - toolchain
wrapper used for real building has all set internally and so proper
flags are implicitly used.
But there's yet another corner case which is not handled that way -
these are binaries or rather libraries which are being used as a part of
GCC compilation: libgcc_s.so.1 and libstdc++.so.
And so to make sure both the libraries get built properly we need to
set TARGET_CFLAGS (cures libgcc_s.so) & TARGET_LDFLAGS (cures
libstdc++.so).
In case of ARM by defaut 64 KiB page size seems to be used, as w/o
that patch we see the following for BR2_ARM64_PAGE_SIZE_4K=y:
--------------------------->8----------------------------
$ ./output/host/bin/aarch64-linux-readelf -l ./output/target/lib/libgcc_s.so.1
Elf file type is DYN (Shared object file)
Entry point 0x0
There are 6 program headers, starting at offset 64
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000013d1c 0x0000000000013d1c R E 0x10000
LOAD 0x000000000001fd98 0x000000000002fd98 0x000000000002fd98
0x0000000000000438 0x00000000000005c8 RW 0x10000
DYNAMIC 0x000000000001fdb8 0x000000000002fdb8 0x000000000002fdb8
0x0000000000000200 0x0000000000000200 RW 0x8
$ ./output/host/bin/aarch64-linux-readelf -l ./output/target/usr/lib/libstdc++.so.6.0.32
Elf file type is DYN (Shared object file)
Entry point 0x0
There are 7 program headers, starting at offset 64
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x00000000001d3462 0x00000000001d3462 R E 0x10000
LOAD 0x00000000001d5760 0x00000000001e5760 0x00000000001e5760
0x000000000000e528 0x0000000000012de8 RW 0x10000
DYNAMIC 0x00000000001deef0 0x00000000001eeef0 0x00000000001eeef0
0x0000000000000240 0x0000000000000240 RW 0x8
--------------------------->8----------------------------
Note alignment of 0x10000 in sections marked for loading.
And with the patch applied we get expected alignment of 0x1000 (4
KiB):
--------------------------->8----------------------------
$ ./output/host/bin/aarch64-linux-readelf -l ./output/target/lib/libgcc_s.so.1
Elf file type is DYN (Shared object file)
Entry point 0x0
There are 6 program headers, starting at offset 64
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000013d1c 0x0000000000013d1c R E 0x1000
LOAD 0x0000000000013d98 0x0000000000014d98 0x0000000000014d98
0x0000000000000438 0x00000000000005c8 RW 0x1000
DYNAMIC 0x0000000000013db8 0x0000000000014db8 0x0000000000014db8
0x0000000000000200 0x0000000000000200 RW 0x8
$ ./output/host/bin/aarch64-linux-readelf -l ./output/target/usr/lib/libstdc++.so.6.0.32
Elf file type is DYN (Shared object file)
Entry point 0x0
There are 7 program headers, starting at offset 64
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x00000000001d3462 0x00000000001d3462 R E 0x1000
LOAD 0x00000000001d3760 0x00000000001d4760 0x00000000001d4760
0x000000000000e528 0x0000000000012de8 RW 0x1000
DYNAMIC 0x00000000001dcef0 0x00000000001ddef0 0x00000000001ddef0
0x0000000000000240 0x0000000000000240 RW 0x8
--------------------------->8----------------------------
A nice side effect is that we can get rid of the special handling of
"-matomic" as it's already part of ARCH_TOOLCHAIN_WRAPPER_OPTS.
[1] https://git.buildroot.net/buildroot/commit/?id=3cc2c6d19ab2e1bb4634f26f9318da9b07df5fff
[2] https://git.buildroot.net/buildroot/commit/?id=dcb74db89e74e512e36b32cea6f574a1a1ca84c4
[3] https://git.buildroot.net/buildroot/commit/?id=5e52c28397b79f8c4c99552217cbe95202166626
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vladimir Isaev <VVIsaev@gmail.com>
Signed-off-by: Pavel Kozlov <kozlov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A RISC-V 64bit EFI defconfig was added in commit 82199551
"configs/qemu_riscv64_virt_efi: new defconfig". So efivar can now be
enabled for this architecture.
This commit adds BR2_RISCV_64 in BR2_PACKAGE_EFIVAR_ARCH_SUPPORTS.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Drop all patches except first one (already in version)
- This bump will fix the following build failure with kernel >= 6.6:
/home/autobuild/autobuild/instance-2/output-1/build/dahdi-linux-3.2.0/drivers/dahdi/wct4xxp/base.c: In function ‘free_wc’:
./include/linux/workqueue.h:639:9: error: call to ‘__warn_flushing_systemwide_wq’ declared with attribute warning: Please avoid flushing system-wide workqueues. [-Werror=attribute-warning]
639 | __warn_flushing_systemwide_wq(); \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/autobuild/autobuild/instance-2/output-1/build/dahdi-linux-3.2.0/drivers/dahdi/wct4xxp/base.c:2025:9: note: in expansion of macro ‘flush_scheduled_work’
2025 | flush_scheduled_work();
| ^~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
https://github.com/asterisk/dahdi-linux/releases/tag/v3.3.0
Fixes:
- http://autobuild.buildroot.org/results/e9755e1f4814b6b0c151c590b5c34acfd89556ad
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to the latest version of the gcnano-binaries blobs, which are
compatible with the last v6.1-stm32mp-r1 kernel from the
STMicroelectronics BSP.
The location of the driver has changed it is now in the
gcnano-driver-stm32mp directory instead of an archive.
The VERSION and PREFIX temporary variable in pkgconfig file came back
therefore the sed replacement also came back.
The EULA license file has changed due to copyright year update, so its
hash has changed.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Hash of license file is changed due to:
-Copyright 2005-2022 SQLAlchemy authors and contributors <see AUTHORS file>.
+Copyright 2005-2024 SQLAlchemy authors and contributors <see AUTHORS file>.
Signed-off-by: Flávio Tapajós <flavio.tapajos@newtesc.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/5834758777
Commit e7d16c35a (boot/arm-trusted-firmware: fix the RPATH of fiptool) tried
to fix the build of host-fiptool, but forgot to pass HOST_CFLAGS.
On hosts without (compatible) openssl development headers, this breaks
the build when it cannot find the openssl headers:
fiptool_platform.h:19:11: fatal error: openssl/sha.h: No such file or directory
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following musl build failure with powerpc raised since bump to
version 2.14 in commit c6addf4606:
In file included from fault.h:36,
from handler-unix.c:77,
from handler.c:19:
handler-unix.c: In function 'sigsegv_handler':
fault-linux-powerpc.h:35:73: error: 'mcontext_t' has no member named 'uc_regs'; did you mean 'gregs'?
35 | # define SIGSEGV_FAULT_STACKPOINTER ((ucontext_t *) ucp)->uc_mcontext.uc_regs->gregs[1]
| ^~~~~~~
handler-unix.c:157:43: note: in expansion of macro 'SIGSEGV_FAULT_STACKPOINTER'
157 | uintptr_t old_sp = (uintptr_t) (SIGSEGV_FAULT_STACKPOINTER);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/77b600071f07605be3ec28e2da46d6938e240087
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
PostgreSQL has optional ICU support. So enable it if library are available.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
I will only be supporting Flutter and other packages needed by Amarula Solution
in a professional related capacity from now on.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Starting with kernel release v6.5 ARM DTS files are placed in vendor
subdirectories (Linux commit 724ba6751532 ("ARM: dts: Move .dts files to
vendor sub-directories")).
This fixes:
make[3]: *** No rule to make target 'arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dtb'. Stop.
make[2]: *** [Makefile:1384: bcm4708-smartrg-sr400ac.dtb] Error 2
make[3]: *** No rule to make target 'arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dtb'. Stop.
make[2]: *** [Makefile:1384: bcm47094-luxul-xwr-3150-v1.dtb] Error 2
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bump will fix the following libsoup3 build failure raised since
commit 9cbffdf9be:
FAILED: libsoup/libsoup-3.0.vapi
/home/buildroot/autobuild/instance-1/output-1/host/bin/vapigen --quiet --library=libsoup-3.0 --directory=/home/buildroot/autobuild/instance-1/output-1/build/libsoup3-3.4.4/build/libsoup --pkg=gio-2.0 --metadatadir=/home/buildroot/autobuild/instance-1/output-1/build/libsoup3-3.4.4/libsoup /home/buildroot/autobuild/instance-1/output-1/build/libsoup3-3.4.4/build/libsoup/Soup-3.0.gir /home/buildroot/autobuild/instance-1/output-1/build/libsoup3-3.4.4/libsoup/Soup-3.0-custom.vala
Soup-3.0.gir:6877.95-6877.95: error: The type name `GLib.TlsProtocolVersion' could not be found
https://gitlab.gnome.org/GNOME/vala/-/blob/0.56.14/NEWS
Fixes:
- http://autobuild.buildroot.org/results/732fcd20c2998e7d7b6b8f61871ad104f8d243df
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following static build failure raised since bump to version
5.38.2 in commit 41e2828c41:
/home/buildroot/autobuild/instance-3/output-1/host/lib/gcc/arc-buildroot-linux-uclibc/10.2.0/../../../../arc-buildroot-linux-uclibc/bin/ld: lib/auto/re/re.a(re_comp.o): in function `Perl_reg_add_data':
re_comp.c:(.text+0x9a24): multiple definition of `Perl_reg_add_data'; libperl.a(regcomp.o):regcomp.c:(.text+0x4f7c): first defined here
Fixes:
- http://autobuild.buildroot.org/results/c61b60430d36c5c63bd3cf0257f2193a40fb0b60
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use linux64-s390x configure target to fix the following s390x build
failure raised since bump to version 3.2.0 in commit
973b1eba5a and
https://github.com/openssl/openssl/commit/79040cf29e011c21789563d74da626b7465a0540:
/home/buildroot/autobuild/instance-3/output-1/host/lib/gcc/s390x-buildroot-linux-gnu/13.2.0/../../../../s390x-buildroot-linux-gnu/bin/ld: libcrypto.a(libcrypto-lib-dh_key.o): in function `dh_bn_mod_exp':
dh_key.c:(.text+0x3c8): undefined reference to `s390x_mod_exp'
/home/buildroot/autobuild/instance-3/output-1/host/lib/gcc/s390x-buildroot-linux-gnu/13.2.0/../../../../s390x-buildroot-linux-gnu/bin/ld: libcrypto.a(libcrypto-lib-rsa_ossl.o): in function `rsa_ossl_s390x_mod_exp':
rsa_ossl.c:(.text+0xd2c): undefined reference to `s390x_crt'
Fixes:
- http://autobuild.buildroot.org/results/77c5e13127de67a69782f138aa28c8b0ad951941
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This reverts commit 245b13a077 as docker
selinux module is for docker-engine, not for "a system tray dock for X"
Moreover, it raises the following build failure:
Compiling targeted policy.33
env LD_LIBRARY_PATH="/home/buildroot/autobuild/instance-0/output-1/per-package/refpolicy/host/lib:/home/buildroot/autobuild/instance-0/output-1/per-package/refpolicy/host/usr/lib" /home/buildroot/autobuild/instance-0/output-1/per-package/refpolicy/host/usr/bin/checkpolicy -c 33 -U deny -S -O -E policy.conf -o policy.33
policy.conf:1912:ERROR 'attribute container_engine_domain is not declared' at token ';' on line 1912:
type dockerd_t, container_engine_domain;
type dockerd_exec_t;
Fixes:
- http://autobuild.buildroot.org/results/87d78b6f15875f0fa3e6fc85e352db14ab0383bb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Yann reported in [1] that edk2 build could sometimes fail. The issue
can be reproduced when per-package directories is enabled, or also
when building on a system with GNU Make >= 4.4 using the
"--shuffle=reverse" option (such as Fedora 39). Those are pointing
toward a Makefile dependency issue.
The issue can be reproduced with commands:
cat > .config <<EOF
BR2_riscv=y
BR2_RISCV_64=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TARGET_EDK2=y
EOF
make olddefconfig
Then, building either with:
make --shuffle=reverse
Or:
utils/config -e BR2_PER_PACKAGE_DIRECTORIES
make olddefconfig
make -j$(nproc)
It is interesting to mention that when using "make --shuffle=reverse"
to build, the build can be completed if restarted only with "make". It
will not pull any other Buildroot package. This fact hints toward a
Makefile dependency issue internal to the EDK2 build system, rather
than in the Buildroot recipe.
The EDK2 build system is quite unique. See [2]. It generates files,
makefiles and internally uses GNU Make to compile code. This system is
likely not tested as being a sub-Make process in a complex Makefile
such as Buildroot.
In order to prevent Buildroot to pass unexpected Make flags to the
EDK2 sub-Make, this commit unset the MAKEFLAGS variable in the EDK2
build environment. This will put the EDK2 build script in a more
common and tested state. See GNU Make documentation about recursive use
of Make, more specifically [3].
Note: as mentioned, the build failure is likely due to an internal
issue of the EDK2 build system. The failure points to a missing
dependency in the EDK2 generator itself. This commit does not fix this
issue, but rather put the EDK2 build system in a normalized
environment, avoiding Buildroot flags being passed to the internal
EDK2 sub-Make invocation. The upstream EDK2 build system most likely
need a fix too.
Fixes:
make[2]: *** No rule to make target '/buildroot/output/build/edk2-edk2-stable202308/Build/RiscVVirtQemu/RELEASE_GCC5/RISCV64/MdeModulePkg/Application/UiApp/UiApp/DEBUG/UiApp.efi', needed by '/buildroot/output/build/edk2-edk2-stable202308/Build/RiscVVirtQemu/RELEASE_GCC5/FV/Ffs/462CAA21-7614-4503-836E-8AB6F4662331UiApp/UiApp.offset'. Stop.
build.py...
: error 7000: Failed to execute command
make tbuild [/buildroot/output/build/edk2-edk2-stable202308/Build/RiscVVirtQemu/RELEASE_GCC5/RISCV64/MdeModulePkg/Application/UiApp/UiApp]
build.py...
: error F002: Failed to build module
/buildroot/output/build/edk2-edk2-stable202308/MdeModulePkg/Application/UiApp/UiApp.inf [RISCV64, GCC5, RELEASE]
[1] https://lists.buildroot.org/pipermail/buildroot/2023-December/681507.html
[2] https://tianocore-docs.github.io/edk2-BuildSpecification/draft/4_edk_ii_build_process_overview/42_build_process_overview.html
[3] https://www.gnu.org/software/make/manual/make.html#Options_002fRecursion
Reported-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
vala bindings are needed to build gssdp 1.6 vapi bindings and avoid the
following build failure since commit
0cd1096eb0:
FAILED: vala/gssdp-1.6.vapi
/home/buildroot/autobuild/instance-2/output-1/host/bin/vapigen --quiet --library=gssdp-1.6 --directory=/home/buildroot/autobuild/instance-2/output-1/build/gssdp-1.6.3/build/vala --pkg=gio-2.0 --pkg=libsoup-3.0 --metadatadir=/home/buildroot/autobuild/instance-2/output-1/build/gssdp-1.6.3/vala /home/buildroot/autobuild/instance-2/output-1/build/gssdp-1.6.3/build/libgssdp/GSSDP-1.6.gir
error: Package `libsoup-3.0' not found in specified Vala API directories or GObject-Introspection GIR directories
Fixes:
- http://autobuild.buildroot.org/results/e5fbfc95964beac314c9faffc2c12541d0a10a48
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues:
1) CVE-2023-6377: X.Org server: Out-of-bounds memory write in XKB button actions
A device has XKB button actions for each button on the device. When a
logical device switch happens (e.g. moving from a touchpad to a mouse), the
server re-calculates the information available on the respective master
device (typically the Virtual Core Pointer). This re-calculation only
allocated enough memory for a single XKB action rather instead of enough for
the newly active physical device's number of button. As a result, querying
or changing the XKB button actions results in out-of-bounds memory reads and
writes.
This may lead to local privilege escalation if the server is run as root or
remote code execution (e.g. x11 over ssh).
2) CVE-2023-6478: X.Org server: Out-of-bounds memory read in
RRChangeOutputProperty and RRChangeProviderProperty
This fixes an OOB read and the resulting information disclosure.
Length calculation for the request was clipped to a 32-bit integer. With
the correct stuff->nUnits value the expected request size was truncated,
passing the REQUEST_FIXED_SIZE check.
The server then proceeded with reading at least stuff->nUnits bytes
(depending on stuff->format) from the request and stuffing whatever it finds
into the property. In the process it would also allocate at least
stuff->nUnits bytes, i.e. 4GB.
See also CVE-2022-46344 where this issue was fixed for other requests.
For more details, see the advisory:
https://lists.x.org/archives/xorg-announce/2023-December/003435.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure raised since bump of libxml2 to version
2.12.1 in commit d8ac52108c:
/home/buildroot/autobuild/instance-1/output-1/build/libiio-0.25/xml.c: In function 'xml_create_context':
/home/buildroot/autobuild/instance-1/output-1/build/libiio-0.25/xml.c:481:15: warning: implicit declaration of function 'xmlReadFile' [-Wimplicit-function-declaration]
481 | doc = xmlReadFile(xml_file, NULL, XML_PARSE_DTDVALID);
| ^~~~~~~~~~~
/home/buildroot/autobuild/instance-1/output-1/build/libiio-0.25/xml.c:481:43: error: 'XML_PARSE_DTDVALID' undeclared (first use in this function); did you mean 'XML_DOC_DTDVALID'?
481 | doc = xmlReadFile(xml_file, NULL, XML_PARSE_DTDVALID);
| ^~~~~~~~~~~~~~~~~~
| XML_DOC_DTDVALID
Fixes:
- http://autobuild.buildroot.org/results/f97c2db33e07a02699e4650caf97de5f3c475eb8
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure raised since bump of libxml2 to version
2.12.1 in commit d8ac52108c:
../libxml++/nodes/entityreference.cc: In member function 'xmlpp::ustring xmlpp::EntityReference::get_resolved_text() const':
../libxml++/nodes/entityreference.cc:30:35: error: invalid use of incomplete type 'struct _xmlEntity'
30 | const xmlChar* pch = cEntity->content;
| ^~
Fixes:
- http://autobuild.buildroot.org/results/f3cef04950eeaa744ebe9409561d505606375787
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test_python_ml_dtypes.py enabled BR2_PACKAGE_PYTHON3_ZLIB=y in its
configuration to workaround the fact that the toolchain used to
testing was tainted with zlib.
The commit 7e0e6e3
"toolchain/toolchain-external/toolchain-external-bootlin: update to
2023.11-1" updated the toolchains which are no longer tainted with
zlib.
The workaround is no longer needed and this commit removes this
config, for consistency.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
New toolchains have been released, with the following changes:
- The bleeding-edge toolchains are based on gcc 13.2, binutils 2.41,
gdb 14.1, kernel headers 5.10, glibc 2.38, musl 1.2.4 or uclibc-ng
1.0.45.
- The stable toolchains are based on gcc 12.3, binutils 2.40, gdb
13.2, kernel headers 4.14, glibc 2.38, musl 1.2.4 or uclibc-ng
1.0.45.
- The glibc version is no longer affected by CVE-2023-4911
- The gdb build has been fixed to no longer rely on uninstalled
libbfd.so and libopcodes.so libraries
- The zlib library, which was incorrectly present in the toolchain
sysroot, is gone, fixing various build failures encountered with
2023.08 toolchains.
- There are now toolchains for m68k 68xxx based on uclibc and musl in
addition to glibc, which was already supported
The careful reviewer will notice that a number of
depends on !BR2_ARCH_NEEDS_GCC_AT_LEAST_14
are being added to the toolchains that use gcc 13.x, as per
a0d2a5cfec
("support/scripts/gen-bootlin-toolchains: generate
BR2_ARCH_NEEDS_GCC_AT_LEAST_X guard").
All 214 test cases were successfully run:
https://gitlab.com/tpetazzoni/buildroot/-/pipelines/1120323562
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since commit
a0d2a5cfec ("support/scripts/gen-bootlin-toolchains:
generate BR2_ARCH_NEEDS_GCC_AT_LEAST_X guard"), the
gen-bootlin-toolchains script will generate references to
BR2_ARCH_NEEDS_GCC_AT_LEAST_X including potentially against the "next"
version of gcc.
Indeed, a toolchain using gcc 13.x should have a "depends on
!BR2_ARCH_NEEDS_GCC_AT_LEAST_14" so that once some architectures that
require gcc 14.x are added, such toolchains are not made visible.
In order for this to work, we must have the
BR2_ARCH_NEEDS_GCC_AT_LEAST_x symbol ready for the N+1 version of gcc
compared to the latest one we support.
As we're supporting up to gcc 13.x right now, let's introduce the
symbol BR2_ARCH_NEEDS_GCC_AT_LEAST_14 so that gcc 13.x toolchains can
be marked depends on !BR2_ARCH_NEEDS_GCC_AT_LEAST_14.
The other alternative would be to make the gen-bootlin-toolchains a
bit smarter, and not emit this depends on
!BR2_ARCH_NEEDS_GCC_AT_LEAST_14 if BR2_ARCH_NEEDS_GCC_AT_LEAST_14 does
not exist. But this would require re-running the script when
BR2_ARCH_NEEDS_GCC_AT_LEAST_14 which we are unlikely to do. While
today, when the script is invoked, the usual check-symbols complains
and reminds us that BR2_ARCH_NEEDS_GCC_AT_LEAST_14 should be added, so
we remember to do it right away.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since commit 5770a645a3 ("package/qt5:
bump packages to latest kde submodule versions"), the
QT_HEADERS_SYNC_HOOK hook no longer calls the syncqt.pl script, so
host-perl is no longer needed as a dependency of running this
hook (and as a dependency of building Qt).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
qt6base installs things in /usr/mkspecs, but also the soon to be added
qt6core5compat, and the existing package qwt as well.
So let's move the removal of /usr/mkspecs in target-finalize, where we
already remove lots of development-related directories, using a
target-finalize hook in the qt6base package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: make it a qt6base target-finalize hook]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
BR2_DOWNLOAD_FORCE_CHECK_HASHES currently has the following
dependency:
depends on BR2_GLOBAL_PATCH_DIR != ""
However, strictly speaking checking all hashes does not necessarily
require using BR2_GLOBAL_PATCH_DIR, as long as you don't use custom
versions.
But more importantly:
- Having this dependency means that this options is hidden when people
don't use BR2_GLOBAL_PATCH_DIR. Instead the option should always be
made visible, encouraging people to turn it on.
- The Config.in comment was there to mitigate this previous argument,
but this comment then shows up all the time when you have an empty
global patch dir.
This seems over-complicated, and it sounds much easier to have the
option unconditionally available, and visible, and clarify in its help
text that in order to this to work fully with custom package versions,
BR2_GLOBAL_PATCH_DIR can be used to provide extra hash files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- fix typo noticed by Peter K.
- reword kast sentence after review by Peter K.
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
With upstram commit [1] (since version v0.1.0) the pipeline option 'raspberrypi'
was renamed to 'rpi/vc4'.
Change the buildroot option name from BR2_PACKAGE_LIBCAMERA_PIPELINE_RASPBERRYPI
to BR2_PACKAGE_LIBCAMERA_PIPELINE_RPI_VC4 (and add Config.in.legacy entry
accordingly) and move handling in Config.in/libcamer.mk to follow alphabetic
ordering.
Fixes:
.../build/libcamera-v0.1.0/meson.build:3:0: ERROR: Options "raspberrypi" are not in allowed choices: "all, auto, imx8-isi, ipu3, rkisp1, rpi/vc4, simple, uvcvideo, vimc"
[1] https://git.libcamera.org/libcamera/libcamera.git/commit/?id=726e9274ea95fa46352556d340c5793a8da51fcd
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This reverts commit c9645fd29b.
Building libcamera-apps 1.3.0 with current libcamera 0.1.0 fails because
some of the symbols like controls::AeFlickerMode are not recognized.
According to my research, they have been introduced after libcamera 0.1.0
but there is no release version of libcamera newer than 0.1.0 available
to which we could bump.
Signed-off-by: Sebastian Bauer <mail@sebastianbauer.info>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
After adding GDB 14.x and making GDB 13.x the new default, let's drop
support for GDB 11.x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
All patches are still relevant, and have been rebased on top of GDB
14.1.
GDB 14.1 now needs mpfr unconditionally, so it is added as a
dependency of host-gdb, and of gdb when the full debugger is built.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- add comment about selecting mpfr for 14.x or later
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A few package or config removals have been introduced after the 2023.11
release, but there entries were still added to the list of options
removed in 2023.11.
The affected commits are:
64a5831679 package/libmpd: remove package
f93380ab1a package/gmpc: remove package
6d8c7aecbb package/flickcurl: remove package
f6acde11ab package/onevpl: rename package to libvpl
fffb245f66 package/linux-headers: drop 6.5.x option
Introduce the 2024.02 section and move the 2023.11 one to where it
belongs.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since GDB 13.x and upstream commit
b686ecb5b10be9a33ab8f1bfdcff22eef920d1a5 ("gdb: link executables with
libtool"), gdb will be linked against the shared variants of libbfd
and libopcodes if they exist. However, this causes host gdb and target
gdb to not work, because our gdb package does not install libbfd and
libopcodes (to not clash with the ones potentially installed by
binutils).
In order to get around this, this commit proposes to get back to the
situation we had before GDB 13.x: libbfd and libopcodes are only
compiled as static libraries, so that they are linked directly inside
the gdb binary, avoiding the problem entirely.
This resolves:
# gdb --version
gdb: error while loading shared libraries: libopcodes-2.39.50.so: cannot open shared object file: No such file or directory
for target gdb, and:
$ ./host/bin/arm-linux-gdb --version
./host/bin/arm-linux-gdb: error while loading shared libraries: libopcodes-2.39.50.so: cannot open shared object file: No such file or directory
for host gdb.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Following the removal of gmpc, we can drop libmpd as well, which was
apparently developed/maintained by the same group of people. The URL
in Config.in, http://gmpcwiki.sarine.nl/index.php?title=Libmpd, no
longer works, and no new alternative upstream was found.
The reference MPD client library is libmpdclient, which is still
maintained.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Drop patches (already in version) and so drop autoreconf
- Fix the following security issues:
- CVE-2023-40660: Fix Potential PIN bypass
- CVE-2023-40661: Important dynamic analyzers reports
- CVE-2023-4535: Out-of-bounds read in MyEID driver handling
encryption using symmetric keys
https://github.com/OpenSC/OpenSC/releases/tag/0.24.0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The default terminal used by sway is the foot terminal. Add a note in
the Config.in explaining that if a user is using the default sway config,
it is recommended to also enable the foot package.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a config option to build sway with swaybar support.
- The bar requires dejavu fonts.
- If bash-completions is selected, JQ is required.
- Select dmenu-wayland as a runtime dependency.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: jq is a runtime dependency too]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
From foot/INSTALL.md:
```
As of ncurses 2021-07-31, ncurses includes a version of foot’s
terminfo. **The recommendation is to use those**, and only install the
terminfo definitions from this git repo if the system’s ncurses
predates 2021-07-31.
```
So it is best to follow the instructions and install the foot terminfo
provided by ncurses.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is the default terminal sway uses.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: add comment only for first-order deps]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The traditional dmenu is only running under X; dmenu-wayland is an
implementation that runs only on (some) wayland compositors; Sway
uses it by default as its menu bar.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr:
- _SYNC_4 is an arch dependency, so comment should be hidden
- add a few missing comments for first-level dependencies
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since upstream commit
https://github.com/ImageMagick/ImageMagick/commit/25e3a4f3845f59536d19aba0ac0580aa6715147f
(which first appeared in version 7.1.1-19), ImageMagick does not trust
unvalidated XMP profiles in images anymore.
If such a XML profile is encountered inside e.g. a PNG image the
processing is aborted. Validating the XMP profile requires that
ImageMagick is compiled with XML support.
As host-imagemagick supports PNG file also activate XML support.
Signed-off-by: Christian Hitz <christian.hitz@bbv.ch>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig enables edk2 UEFI shell and grub2 riscv64-efi boot
of a Linux Kernel.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Drop no longer needed
0001-mainline-version-gcc-13-cannot-use-uintptr_t-via-inc.patch as
it was a backport from upstream
- Updated license hash due to numerous additions of licenses, and
updated copyright years. The LICENSE variable was updated
accordingly, and clarified
- zlib is now a mandatory dependency, it is not checked at configure
time, but <zlib.h> is uncondtionnally included, and libzlib is
linked in unconditionnally. See
https://chromium.googlesource.com/breakpad/breakpad/+/de086a98595f68715c1dce9860f77014a2a1b187
- explicitly disable zstd support, which was added in upstream commit
https://chromium.googlesource.com/breakpad/breakpad/+/9ea5b228f560580f85df895c2f117d7e43340935. This
requires adding AUTORECONF = YES because the pre-generated
configure/Makefile.in available in the Git repository is out of
date, and links unconditionnally with -lzstd, even when
--disable-zstd is passed.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[Thomas: handle zlib dependency, handle zstd option, fix LICENSE variable]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
grub2 build is failing, when compiled on host system not including
gawk and host-gawk is not built by another package before. This can
be the the case on current Buildroot Docker image, based on Debian,
which includes mawk.
grub2 was updated in commit 5baf1ffe7e "boot/grub2: bump to version
2.12". This version includes the commit [1], which introduced the use
of the asorti() awk function. This function is a specific gawk
builtin extension. See [2].
This commit fixes this issue by adding host-gawk as a dependency.
Fixes:
mawk: ../../grub-core/genmoddep.awk: line 110: function asorti never defined
make[4]: *** [Makefile:49030: moddep.lst] Error 1
make[4]: Leaving directory '/buildroot/output/build/grub2-2.12/build-i386-pc/grub-core'
make[3]: *** [Makefile:28116: all] Error 2
make[3]: Leaving directory '/buildroot/output/build/grub2-2.12/build-i386-pc/grub-core'
make[2]: *** [Makefile:11714: all-recursive] Error 1
make[2]: Leaving directory '/buildroot/output/build/grub2-2.12/build-i386-pc'
make[1]: *** [Makefile:3547: all] Error 2
make[1]: Leaving directory '/buildroot/output/build/grub2-2.12/build-i386-pc'
make: *** [package/pkg-generic.mk:283: /buildroot/output/build/grub2-2.12/.stamp_built] Error 2
[1] https://git.savannah.gnu.org/gitweb/?p=grub.git;a=commitdiff;h=87648e9c12a32bddb005b899edc44c2c9c63df82
[2] https://www.gnu.org/software/gawk/manual/gawk.html#Sorting-Array-Values-and-Indices-with-gawk
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
[Thomas: improved with a more complete patch provided by upstream
developer.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As we're about to update libxml2 to version 2.12, let's first fix a
build issue that would occur with squid by backporting an upstream
patch.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The linux defconfig 'bb.org_defconfig' is the best for beagleboard.
To load compressed kernel modules, kmod and xz packages are needed
because busybox doesn't support it.
Bump U-Boot to version 2023.10. The uboot-tools package is no need.
Tested on beaglebone black.
[1] https://github.com/beagleboard/linux/releases/tag/6.1.46-ti-r13
Signed-off-by: Scott Fan <fancp2007@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The runscript and rc binaries have been removed in this release. However,
Buildroot does not use those binaries, so only a simple version bump is
necessary.
Fixes:
- cgroups being inconsistent
- Start-stop-daemon did not work correctly on Linux 6.6
Tested on Debian 11 and Fedora 39 with the following command:
./support/testing/run-tests tests.init.test_openrc
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit d344ffe624 (configs/rock5b: add hash for custom uboot)
explicitly noted that the kernel was retrieved from a git-clone, so the
sha1 of the commit was enough to get what we expect.
However, that does not account for the fact that the upstream repository
can disapear or be temporarily unavailable (maliciously or not). In that
case, the kernel archive will be looked up on the backup mirror.
In that case, the download is via wget over https, which protects the
transport, but does not guarantee that the remote server serves the
expected archive.
The hash file was dropped when d344ffe624 was applied; restore it.
Since the defconfig now has hashes for all its downloads, enforce
checking hashes.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The defconfig uses a custom uboot version, downloaded with wget, so we
weant to be sure that it does not get modified on the server, so we add
a hash for it.
The kernel we get from a git clone, so the sha1 of the commit is enough
to be sure that what we get is what we expect (because we do a local
tarball out of a git clone).
Since we only get a hash for uboot and not for the kernel, we don't
enable BR2_DOWNLOAD_FORCE_CHECK_HASHES.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since upstream commit
eec95e3d5e1a4f2e13b1f6b34cc287475ca57daf ("backend/drm: use pnp.ids to
fetch EDID data"), the pnp.ids file from hwdata is parsed at build
time to generate a C source file. As per backend/drm/meson.build:
hwdata = dependency('hwdata', required: false, native: true)
if hwdata.found()
hwdata_dir = hwdata.get_variable(pkgconfig: 'pkgdatadir')
pnp_ids = files(hwdata_dir / 'pnp.ids')
else
pnp_ids = files('/usr/share/hwdata/pnp.ids')
endif
This is only needed when the DRM backend of wlroots is enabled, but
currently, Buildroot enables this backend unconditionally.
This failure can be reproduced using the following defconfig:
BR2_x86_64=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_OSMESA_GALLIUM=y
BR2_PACKAGE_MESA3D_OPENGL_EGL=y
BR2_PACKAGE_MESA3D_OPENGL_ES=y
BR2_PACKAGE_WLROOTS=y
The issue was not caught in the autobuilders because the last
successful build of a configuration that includes wlroots dates back
from 2022-05-05, at which time Buildroot had wlroots 0.15.1.
This change in wlroots was introduced in wlroots 0.16.0, which means
that it's only since Buildroot bumped from 0.15.1 to 0.16.2 in
d6279bc82c ("package/wlroots: bump to
version 0.16.2") that the issue occurs. This commit is not yet in any
tagged release, so there is no need to backport this fix.
It should be noted that the proposed patch also installs pnp.ids to
the target filesystem, while it is in practice not needed at runtime
by wlroots. However, our current hwdata packaging doesn't allow
installing it only in staging, and since wlroots anyway implies we're
building a fairly heavy graphics stack, the size overhead of hwdata is
deemed to be an acceptable trade-off.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[Thomas: further extend the commit log, with details gathered by Yann
and myself.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
According to the Debian changelog, it doesn't seem like there is any
security issue addressed between 6.2.10 and 6.2.12:
unrar-nonfree (1:6.2.12-1) unstable; urgency=medium
* New upstream version 6.2.12
* Rediff patches
-- YOKOTA Hiroshi <yokota.hgml@gmail.com> Thu, 05 Oct 2023 20:49:53 +0900
unrar-nonfree (1:6.2.11-1) unstable; urgency=medium
* New upstream version 6.2.11
-- YOKOTA Hiroshi <yokota.hgml@gmail.com> Wed, 20 Sep 2023 21:41:29 +0900
Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As described in the announcement, this fixes a security issue:
There is one security fix in this release:
- Fix for a newly discovered security issue known as the 'Terrapin'
attack, also numbered CVE-2023-48795. The issue affects widely-used
OpenSSH extensions to the SSH protocol: the ChaCha20+Poly1305
cipher system, and 'encrypt-then-MAC' mode.
In order to benefit from the fix, you must be using a fixed version
of PuTTY _and_ a server with the fix, so that they can agree to
adopt a modified version of the protocol. Alternatively, you may be
able to reconfigure PuTTY to avoid selecting any of the affected
modes.
If PuTTY 0.80 connects to an SSH server without the fix, it will
warn you if the initial protocol negotiation chooses an insecure
mode to run the connection in, so that you can abandon the
connection. If it's possible to alter PuTTY's configuration to
avoid the problem, then the warning message will tell you how to do
it.
https://lists.tartarus.org/pipermail/putty-announce/2023/000037.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
RISC-V 64bit qemu virt machine support has been added in edk2
version "stable202302". See [1].
Since edk2-stable202308, introduced in buildroot in commit 5c9f310
"boot/edk2: bump to version edk2-stable202308", it is now possible
to boot the edk2 UEFI shell in qemu.
This commit adds this early RISC-V support to edk2.
The RISC-V edk2 UEFI shell can be booted in Buildroot with the
following commands:
# Build EDK2 images
cat > .config <<EOF
BR2_riscv=y
BR2_RISCV_64=y
BR2_PACKAGE_HOST_QEMU=y
BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE=y
BR2_TARGET_EDK2=y
EOF
make olddefconfig
make
# edk2 image size should fit the 32MB of qemu pflash memories
truncate -s 32M output/images/RISCV_VIRT_CODE.fd
truncate -s 32M output/images/RISCV_VIRT_VARS.fd
# Start qemu:
output/host/usr/bin/qemu-system-riscv64 \
-M virt,pflash0=pflash0,pflash1=pflash1,acpi=off \
-nographic \
-blockdev node-name=pflash0,driver=file,read-only=on,filename=output/images/RISCV_VIRT_CODE.fd \
-blockdev node-name=pflash1,driver=file,filename=output/images/RISCV_VIRT_VARS.fd
Note: a Qemu version >= 8.0.0 is needed to properly start edk2. A qemu
version on the host system might not be sufficient. This is why the
Buildroot host-qemu is built in this config example.
[1] https://github.com/tianocore/edk2/releases/tag/edk2-stable202302
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
After 10 years we don't have to justify the fork anymore, as it has been
the new upstream for that long now.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
For release announce on mailing list, see [1].
For release general news, see [2].
This commit removes all package patches, as they are all included in
this version.
The .checkpackageignore file is updated accordingly (the entry for
patch 0001 is removed).
This commit also removes GRUB2_AVOID_AUTORECONF hooks, since patch
0001 is removed.
This commit also removes the GRUB2_IGNORE_CVES entries associated to
the removed patches. The version bump should now explicitly exclude
those CVEs. For patches 8 and 9, the upstream commit IDs were
incorrectly recorded:
- patch 8 mentioned d5caac8ab79d068ad9a41030c772d03a4d4fbd7b while
the actual commit is 5bff31cdb6b93d738f850834e6291df1d0b136fa
- patch 9 mentioned 166a4d61448f74745afe1dac2f2cfb85d04909bf while
the actual commit is 347880a13c239b4c2811c94c9a7cf78b607332e3
Finally, this commit introduces a new patch, adding a missing file in
the release tarball.
[1] https://lists.gnu.org/archive/html/grub-devel/2023-12/msg00052.html
[2] https://git.savannah.gnu.org/gitweb/?p=grub.git;a=blob;f=NEWS;hb=refs/tags/grub-2.12
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Adds BR2_PACKAGE_LIBOPENSSL_TARGET_ARCH for riscv32 and riscv64.
Otherwise, riscv targets fall back to the linux-generic libopenssl
configs. This exacerbates the issue partially addressed in
openssl/openssl#22871 which causes build failures.
Fixes a mispelling in upstream causing 0builds for riscv32 to fail when
linking.
Signed-off-by: Grant Nichol <me@grantnichol.com>
[yann.morin.1998@free.fr: squash the two commits together]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
5 CVEs affecting glibc according to the NVD database are considered as
not being security issues by upstream glibc developers:
* CVE-2010-4756: The glob implementation in the GNU C Library (aka
glibc or libc6) allows remote authenticated users to cause a denial
of service (CPU and memory consumption) via crafted glob expressions
that do not match any pathnames. glibc maintainers position: "That's
standard POSIX behaviour implemented by (e)glibc. Applications using
glob need to impose limits for themselves"
* CVE-2019-1010022: GNU Libc current is affected by: Mitigation
bypass. The impact is: Attacker may bypass stack guard
protection. The component is: nptl. The attack vector is: Exploit
stack buffer overflow vulnerability and use this bypass
vulnerability to bypass stack guard. NOTE: Upstream comments
indicate "this is being treated as a non-security bug and no real
threat. glibc maintainers position: "Not treated as a security issue
by upstream https://sourceware.org/bugzilla/show_bug.cgi?id=22850"
* CVE-2019-1010023: GNU Libc current is affected by: Re-mapping
current loaded library with malicious ELF file. The impact is: In
worst case attacker may evaluate privileges. The component is:
libld. The attack vector is: Attacker sends 2 ELF files to victim
and asks to run ldd on it. ldd execute code. NOTE: Upstream comments
indicate "this is being treated as a non-security bug and no real
threat. glibc maintainers position: "Not treated as a security issue
by upstream https://sourceware.org/bugzilla/show_bug.cgi?id=22851"
* CVE-2019-1010024: GNU Libc current is affected by: Mitigation
bypass. The impact is: Attacker may bypass ASLR using cache of
thread stack and heap. The component is: glibc. NOTE: Upstream
comments indicate "this is being treated as a non-security bug and
no real threat. glibc maintainers position: "Not treated as a
security issue by upstream
https://sourceware.org/bugzilla/show_bug.cgi?id=22852"
* CVE-2019-1010025: GNU Libc current is affected by: Mitigation
bypass. The impact is: Attacker may guess the heap addresses of
pthread_created thread. The component is: glibc. NOTE: the vendor's
position is "ASLR bypass itself is not a vulnerability. Glibc
maintainers position: "Not treated as a security issue by upstream
https://sourceware.org/bugzilla/show_bug.cgi?id=22853"
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As reported in bug 15895, the GLIBC_VERSION field having a value
looking like 2.38-27-g750a45a783906a19591fb8ff6b7841470f1f5701, it
prevents the CPE/CVE matching with the NVD database to work correctly.
This commit fixes that by defining GLIBC_CPE_ID_VERSION, derived from
GLIBC_VERSION, by extracting the base version.
Also, we update GLIBC_IGNORE_CVES to account for the CVEs that have
clearly been fixed between 2.38 and
2.38-27-g750a45a783906a19591fb8ff6b7841470f1f5701. There are a number
of other CVEs still affecting the glibc package, but they are not
related to this
2.38...2.38-27-g750a45a783906a19591fb8ff6b7841470f1f5701 range.
Fixes: #15895
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
According to the source file:
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add new python-contourpy runtime dependency.
Add new python-pybind dependency.
Add new host-python-setuptools-scm build dependency.
Update setup.cfg to new mplsetup.cfg install location.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add new python-urwid-readline runtime dependency.
Add new python-packaging runtime dependency.
Remove no longer required python-setuptools runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
this file could be required by some native modules
note: compat-5.3.c is included by compat-5.3.h
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
the project has moved to the organization “Lunar Modules”,
see https://github.com/lunarmodules/
diff LICENCE:
-Copyright (c) 2015 Kepler Project.
+Copyright (C) 1994-2020 Lua.org, PUC-Rio.
+Copyright (C) 2013-2023 The Lua-Compat-5.3 authors.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It turns out that wildcard expansion, * and ?, is not performed in
matching lists {...}, at least in the vim plugin. The spec is not clear
about that, but refer to "pattern matching through Unix shell-style
wildcards" [0].
So, let's consider that this is not supported. Expand the patterns into
one section each, rather than use a list.
[0] https://spec.editorconfig.org/
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
OpenSSH 9.6 was released on 2023-12-18.
This release contains fixes for a newly-discovered weakness in the
SSH transport protocol (the "Terrapin" attack), a logic error relating
to constrained PKCS#11 keys in ssh-agent(1) and countermeasures for
programs that invoke ssh(1) with user or hostnames containing invalid
characters.
https://www.openssh.com/txt/release-9.6
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Git shortlog:
Ben Wolsieffer (3):
fork: generate stub on no-MMU systems
arm: elf-fdpic.h: avoid void pointer subtraction
libpthread/nptl: make default stack size configurable
Greg Ungerer (1):
elf: support ELF binaries in noMMU
Marcus Haehnel (3):
fnmatch: fix possible access beyond of parameter string
getaddrinfo.c: Avoid misleading indentation warning
linuxthreads: Avoid unused variable warning
Marcus Hähnel (1):
setjmp.h: Fix C++ build and avoid duplicate throw declaration
Max Filippov (1):
daemon.c: make _fork_parent static inline again
Paul Iannetta (1):
kvx: fix asm syntax
Pavel Kozlov (6):
setrlimit/getrlimit: fix prlimit64 syscall use for 32-bit CPUs
Fix -Warray-parameter warning for __sigsetjmp
prlimit: add name redirection and fix incorrect parameters to syscall
arc: add acq/rel variants for atomic cmpxchg/xchg
arc: remove read ahead in asm strcmp code for ARCHS
rlimit: fix 64-bit RLIM64_INFINITY macro
Waldemar Brodkorb (8):
aarch64: add hwcap header file
fcntl.h: declare f_owner_ex for all architectures
arm: add hwcap header file
lm32: disable ctor/dtor
aarch64: disable lazy relocations
riscv64: define __NR_riscv_flush_icache if not available
depend on __UCLIBC_HAVE_STATX__
bump version for 1.0.45 release
Yann Sionneau (9):
fstatat64: define it as a wrapper of statx if the kernel does not support fstatat64 syscall
fstat: add missing return value statement for the statx wrapping case
add support for systems without legacy setrlimit/getrlimit syscalls
fstatat: add wrapper that uses statx for non-legacy arch
kvx: add support for kv3-2 (Coolidge v2 SoC)
kvx: atomic: rework using compiler builtins
kvx: align specification of user regs
kvx: define that kvx port supports statx syscall
kvx: use a custom stat.h header
lordrasmus (8):
add vsdo support
fix file permissions
fix getauxval() on aarch64 gcc 11
vdso support missing file
c6x compile fix vdso support
gettimeofday() only include ldso.h if vdso support is activated
vdso support for x86_64
gitignore
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The 6.5.x series is now EOL upstream, so drop the linux-headers option
and add legacy handling for it.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
[Peter: drop option from linux-headers/Config.host.in]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the update of Python to version 3.11 in commit
738500c296 ("package/python3: bump to
version 3.11.0"), python-sip fails to compile with:
siplib.c: In function ‘sip_api_get_frame’:
siplib.c:13750:22: error: invalid use of undefined type ‘struct _frame’
13750 | frame = frame->f_back;
This is due to a change in the Python C API, which is fixed by a new
patch. The patch can't be upstreamed, as SIP 4.x is no longer
maintained upstream.
Fixes:
http://autobuild.buildroot.net/results/7b01739e7514e48c06182bc1804b32497ce2e414/
Signed-off-by: Ralf Dragon <hypnotoad@lindra.de>
[Thomas: improved commit log, reformatted patch using Git]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues:
- CVE-2023-5367 X.Org server: OOB write in
XIChangeDeviceProperty/RRChangeOutputProperty
- CVE-2023-5380: Use-after-free bug in DestroyWindow
- CVE-2023-5574: Use-after-free bug in DamageDestroy
For details, see the advisory:
https://lists.x.org/archives/xorg-announce/2023-October/003430.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
rsync is used in the infrastructure, mostly for the per-package infra,
and for the override-srcdir mechanism, but also to build the manual.
As such, it is not optional but mandatory, and already listed so.
Drop the reference to rsync from the list of optional packages.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2023-46218: cookie mixed case PSL bypass
This flaw allows a malicious HTTP server to set "super cookies" in curl
that are then passed back to more origins than what is otherwise allowed
or possible. This allows a site to set cookies that then would get sent
to different and unrelated sites and domains.
https://curl.se/docs/CVE-2023-46218.html
- CVE-2023-46219: HSTS long file name clears contents
When saving HSTS data to an excessively long file name, curl could end up
removing all contents, making subsequent requests using that file unaware
of the HSTS status they should otherwise use.
https://curl.se/docs/CVE-2023-46219.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The prebuilt kernel has been updated to 5.10.202, sync the kernel
built by TestDtbocfg.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The prebuilt kernel has been updated to 5.10.202, sync the kernel
built by InitSystemSystemdBaseOverlayfs.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update the zynq readme.txt to add documentation for the zc702 and correct
documentation that was no longer up to date.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Let's also enable NXP firmware package to let latest SDMA firmware to be
loaded. To achieve this we also need to enable dynamic eudev to let it to
load the firmware as it is requested early before the rootfs is mounted.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Peter: explain why eudev is needed]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Let's also enable NXP firmware package to let latest SDMA firmware to be
loaded. To achieve this we also need to enable dynamic eudev to let it
load the firmware as it is requested early before the rootfs is mounted.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
[Peter: explain why eudev is needed]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop patches (already in version)
This bump will fix the following build failure raised since bump of
leptonica to version 1.83.1 in commit
a4e713558d thanks to
https://github.com/tesseract-ocr/tesseract/commit/27b1827ccde6014df1231e1cec6263ee108066e9:
src/textord/devanagari_processing.cpp: In member function 'bool tesseract::ShiroRekhaSplitter::Split(bool, tesseract::DebugPixa*)':
src/textord/devanagari_processing.cpp:130:19: error: invalid use of incomplete type 'struct Pixa'
130 | Box *box = ccs->boxa->box[i];
| ^~
In file included from /home/autobuild/autobuild/instance-5/output-1/host/bin/../s390x-buildroot-linux-gnu/sysroot/usr/include/leptonica/alltypes.h:52,
from /home/autobuild/autobuild/instance-5/output-1/host/bin/../s390x-buildroot-linux-gnu/sysroot/usr/include/leptonica/allheaders.h:35,
from src/textord/devanagari_processing.h:16,
from src/textord/devanagari_processing.cpp:25:
/home/autobuild/autobuild/instance-5/output-1/host/bin/../s390x-buildroot-linux-gnu/sysroot/usr/include/leptonica/bmf.h:48:12: note: forward declaration of 'struct Pixa'
48 | struct Pixa *pixa; /*!< pixa of bitmaps for 93 characters */
| ^~~~
https://github.com/tesseract-ocr/tesseract/blob/5.3.3/ChangeLog
Fixes:
- http://autobuild.buildroot.org/results/46d3ffc8885245ee9a56a528be055b0b27a18245
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 6b915358ba introduced PKG_PYTHON_MATURIN_INSTALL_CMD while
it should be HOST_PKG_PYTHON_MATURIN_INSTALL_CMD.
Adding any new host python package using maturin setup type will
fail during the install step.
Fixes: 6b915358ba
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Updated to gcc 13.2, gdb 13, binutils 2.41, glibc 2.38.
The x86_64 host variant prebuilt toolchain is built on RHEL7
(glibc 2.17) and is likely also be useable on OS versions like
RHEL8, Ubuntu 18.04 or later.
The AArch64 host variant prebuilt toolchain is built on Ubuntu 18.04
(glibc 2.27) is likely also be useable on OS versions like RHEL8,
Ubuntu 18.04 or later.
Release note:
https://developer.arm.com/downloads/-/arm-gnu-toolchain-downloads
Signed-off-by: Antoine Coutant <antoine.coutant@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Updated to gcc 13.2, gdb 13, binutils 2.41, glibc 2.38.
The x86_64 host variant prebuilt toolchain is built on RHEL7
(glibc 2.17) and is likely also be useable on OS versions like
RHEL8, Ubuntu 18.04 or later.
The AArch64 host variant prebuilt toolchain is built on Ubuntu 18.04
(glibc 2.27) is likely also be useable on OS versions like RHEL8,
Ubuntu 18.04 or later.
Tested with qemu_aarch64_virt_defconfig.
Release note:
https://developer.arm.com/downloads/-/arm-gnu-toolchain-downloads
Signed-off-by: Antoine Coutant <antoine.coutant@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Updated to gcc 13.2, gdb 13, binutils 2.41, glibc 2.38.
The x86_64 host variant prebuilt toolchain is built on RHEL7
(glibc 2.17) and is likely also be useable on OS versions like
RHEL8, Ubuntu 18.04 or later.
The AArch64 host variant prebuilt toolchain is built on Ubuntu 18.04
(glibc 2.27) is likely also be useable on OS versions like RHEL8,
Ubuntu 18.04 or later.
Tested with qemu_arm_vexpress_defconfig.
Release note:
https://developer.arm.com/downloads/-/arm-gnu-toolchain-downloads
Signed-off-by: Antoine Coutant <antoine.coutant@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The arm-trusted-firmware package builds a host tool called "fiptool",
which is used during the build process of arm-trusted-firmware
itself. This tool links against the OpenSSL host library, and
therefore needs to be built with the correct RPATH pointing to
$HOST_DIR/lib.
This is why commit a957d9a90a
("boot/arm-trusted-firmware: build fiptool separately with dependency
o n host-openssl") added the ARM_TRUSTED_FIRMWARE_BUILD_FIPTOOL
variable, which builds the fiptool tool first, with the right
variables set, before invoking the full build of TF-A. This ensured
that fiptool was built with the correct RPATH.
However, more recent versions of TF-A have modified their Makefile
machinery, and fiptool is being rebuilt even if it was built
before. Unfortunately, this rebuild is no longer done with the right
flags, so we end up with a fiptool binary that no longer has the right
RPATH, and fiptool fails to find the OpenSSL libraries from
$HOST_DIR/lib.
In order to fix this, we take a different approach: we do not build
fiptool separately first, but we inject the necessary flags through
the HOSTCC variable. Indeed, there's no HOST_LDFLAGS or HOST_LDLIBS
variable or similar that would allow us to pass the -Wl,-rpath flag
that is needed. Shoe-horning this flag into HOSTCC gets the job done,
and actually simplifies our arm-trusted-firmware.mk.
This patch break the compatibility with version prior to 1.4 (upstream
commit 72610c4102990 ("build: Introduce HOSTCC flag")). v1.4 is very old
(July 2017), not used anymore in-tree and probably not used anymore
outside the tree.
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-authored-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When an error occurs, the gitlab-ci job log doesn't contain any useful
information than the name of the failing test:
FAIL: test_run (tests.package.test_python_paho_mqtt.TestPythonPahoMQTT)
In order to encourage contributors to investigate issues reported by
gitlab-ci, we want to print the last lines of the log file (build or
runtime).
Unfortunately, gitlab-ci job log completely strips lines ending with
CRCRLF [1][2]. We have to take a look at the gitlab-ci raw log to see
the complete log [3].
To workaround this issue, remove crlf from qemu serial stdio log
while printing in the gitlab-ci job log (we don't want to change
the log file generated by support/testing/run-tests and saved as
artefacts).
[1] https://gitlab.com/gitlab-org/gitlab/-/issues/218771
[2] https://gitlab.com/kubu93/buildroot/-/jobs/5492937691
[3] https://gitlab.com/kubu93/buildroot/-/jobs/5492937691/raw
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The zynq_qmtech_defconfig has not been maintained for 3 years, and is now
using a very out of date u-boot and Linux kernel. Since there are 4 other
zynq7000 defconfigs available in buildroot and Julien no longer has a
functional board, drop the defconfig.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Acked-by: Julien Olivain <ju.o@free.fr>
[Peter: reword commit message]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the versal_vck190_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30 with additional bug fixes
- U-Boot v2023.01 with additional bug fixes
- ATF v2.8 with additional bug fixes
- PLM xilinx_v2023.2
- PSMFW xilinx_v2023.2
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynqmp_kria_kv260_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30 with additional bug fixes
- U-Boot v2023.01 with additional bug fixes
- ATF v2.8 with additional bug fixes
- PMUFW xilinx_v2023.2
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynqmp_zcu106_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30 with additional bug fixes
- U-Boot v2023.01 with additional bug fixes
- ATF v2.8 with additional bug fixes
- PMUFW xilinx_v2023.2
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynqmp_zcu102_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30 with additional bug fixes
- U-Boot v2023.01 with additional bug fixes
- ATF v2.8 with additional bug fixes
- PMUFW xilinx_v2023.2
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for Xilinx Kria KR260 starter kit.
KR260 features can be found here:
https://www.xilinx.com/products/som/kria/kr260-robotics-starter-kit.html
While the Kria SOM is based on a ZynqMP SoC, there are some key
boot config differences from the other ZynqMP evaluation boards.
1. There are no boot switches on Kria SOMs. The boot mode is thus
hard configured for QSPI flash. A pre-programmed boot.bin comes
with every Starter Kit. U-Boot can then find the Linux kernel and
file system on the SD card.
Optional instructions for updating the boot.bin in the QSPI flash
can be found in the readme.txt file and the link below.
https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM
2. Kria SOMs use UART1 for the console instead of UART0. For this
reason, Kria Starter Kits will use a separate extlinux.conf file
from other ZynqMP evaluation boards.
3. The KR260 has a USB to SD card bridge, so the Linux kernel
and file system are found on /dev/sda1 and /dev/sda2.
Signed-off-by: Neal Frager <neal.frager@amd.com>
[Peter: fix kr260.sh shellcheck warnings, similar to kv260.sh]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following static build failure raised since bump to version
1.1.4 in commit 7205df8a4f:
CMake Error at /home/autobuild/autobuild/instance-13/output-1/build/libmemcached-1.1.4/src/bin/cmake_install.cmake:60 (file):
file RPATH_CHANGE could not write new RPATH:
$ORIGIN/../lib
to the file:
/home/autobuild/autobuild/instance-13/output-1/host/arc-buildroot-linux-uclibc/sysroot/usr/bin/memcapable
No valid ELF RPATH or RUNPATH entry exists in the file;
Call Stack (most recent call first):
/home/autobuild/autobuild/instance-13/output-1/build/libmemcached-1.1.4/src/cmake_install.cmake:52 (include)
/home/autobuild/autobuild/instance-13/output-1/build/libmemcached-1.1.4/cmake_install.cmake:52 (include)
Fixes:
- http://autobuild.buildroot.org/results/778ff517d465896f54a3cd5316a66c54f66fd4cb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add firmware files for RTL8851 and RTL8852 cards used by the rtlbt driver.
Signed-off-by: Jan Čermák <sairon@sairon.cz>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 51d6d6c580.
That change is no more relevant since the genimage.cfg files are
generated by the commit e37ee5acdc (board/raspberrypi/post-image.sh:
generate genimage config from template if not present), and since the
variant-specific files were dropped off by the commit fc5cdeed72
(board/raspberrypi: drop variant-specific genimage files).
This removes the very last alive piece of change of the commit
51d6d6c580 (Fix rasberry Pi 64bit firmware overlay inclusion); the
commit is fully reverted now.
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 6021f3678b.
That change is no more relevant since the genimage.cfg files are
generated by the commit e37ee5acdc (board/raspberrypi/post-image.sh:
generate genimage config from template if not present), and since the
variant-specific files were dropped off by the commit fc5cdeed72
(board/raspberrypi: drop variant-specific genimage files).
This removes the very last alive piece of change of the commit
6021f3678b (board/raspberrypi: handle dtb overlays for all variants);
the commit is fully reverted now.
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As upstream developer mentioned in private communication, the code using
NETDB_INTERNAL is now disabled. Remove the patch.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the latest
U-Boot 2023.10 and ATF 2.9. Increase ext2 partition size to fit
new versions.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
--with-ssl-dir will exclusively search for dynamic library so use
--with-ssl-static to fix the following openssl static build failure
raised since bump to version 5.33.0 in commit
8cedb39764:
checking for static SSL support... disabled
checking for SSL support... enabled
checking for SSL include directory... /home/buildroot/autobuild/instance-2/output-1/host/mipsel-buildroot-linux-uclibc/sysroot/usr/include
checking for SSL library directory... /lib64
[...]
mipsel-buildroot-linux-uclibc-gcc: ERROR: unsafe header/library path used in cross-compilation: '-L/lib64'
Fixes:
- http://autobuild.buildroot.org/results/4189decbafb5d28c11d89ddac792b4610abeaff1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The defconfig fetches Linux and U-Boot from a git repo using the
unauthenticated git:// protocol, so add download hashes for them to ensure
we get the right sources by adding a global patch dir and running
utils/add-custom-hashes.
The defconfig uses the Linux sources for the kernel headers, so make
linux-headers/linux-headers.hash a symlink to linux/linux.hash so the same
hash file is used.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with gcc >= 12:
task.c: In function 't_start':
task.c:398:16: error: 'ret' may be used uninitialized [-Werror=maybe-uninitialized]
398 | return ret;
| ^~~
task.c:364:13: note: 'ret' was declared here
364 | int ret;
| ^~~
task.c: In function 't_resume':
task.c:444:16: error: 'ret' may be used uninitialized [-Werror=maybe-uninitialized]
444 | return ret;
| ^~~
task.c:428:13: note: 'ret' was declared here
428 | int ret;
| ^~~
Fixes:
- http://autobuild.buildroot.org/results/bc1b40de22e563b704ad7f20b6bf4d1f73a6ed8a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following NLS build failure raised since the addition of the
package in commit 9f4f8c5f89:
/home/buildroot/autobuild/run/instance-2/output-1/host/lib/gcc/arm-buildroot-linux-musleabihf/12.3.0/../../../../arm-buildroot-linux-musleabihf/bin/ld: ../../src/common/.libs/libcommon.a(libcommon_la-i18n.o): undefined reference to symbol 'libintl_bindtextdomain'
Fixes:
- http://autobuild.buildroot.org/results/8ab13cf474d732c95a1da65592d950b24b3d474b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with gcc 4.8 raised since bump to
version 1.1.4 in commit 7205df8a4f:
/home/buildroot/autobuild/run/instance-0/output-1/build/libmemcached-1.1.4/src/libmemcachedprotocol/ascii_handler.c: In function 'ascii_get_response_handler':
/home/buildroot/autobuild/run/instance-0/output-1/build/libmemcached-1.1.4/src/libmemcachedprotocol/ascii_handler.c:249:3: error: 'for' loop initial declarations are only allowed in C99 mode
for (int x = 0; x < keylen; ++x) {
^
Fixes:
- http://autobuild.buildroot.org/results/202aeec4dda822ac341d8882f84f968a303697c3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I am no longer work at Synopsys, so remove this email address.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised since bump to version 1.1.4 in
commit 7205df8a4f:
/home/buildroot/autobuild/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/11.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: CMakeFiles/aslap.dir/ms_conn.c.o: undefined reference to symbol '__atomic_fetch_add_4@@LIBATOMIC_1.0'
Fixes:
- http://autobuild.buildroot.org/results/c8e4e1f9609d1339fe070afe440c63660892600e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
fix CVE-2023-47038 - Write past buffer end via illegal user-defined Unicode property
note: 5.36.2 was a broken release
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2023-38703: PJSIP is a free and open source multimedia
communication library written in C with high level API in C, C++, Java,
C#, and Python languages. SRTP is a higher level media transport which
is stacked upon a lower level media transport such as UDP and ICE.
Currently a higher level transport is not synchronized with its lower
level transport that may introduce use-after-free issue. This
vulnerability affects applications that have SRTP capability
(`PJMEDIA_HAS_SRTP` is set) and use underlying media transport other
than UDP. This vulnerability’s impact may range from unexpected
application termination to control flow hijack/memory corruption. The
patch is available as a commit in the master branch.
https://github.com/pjsip/pjproject/security/advisories/GHSA-f76w-fh7c-pc66https://github.com/pjsip/pjproject/releases/tag/2.14
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following static build failure raised since bump to version 0.78
in commit 5673ea3ce4:
In file included from /home/buildroot/autobuild/instance-0/output-1/build/putty-0.78/putty.h:8,
from /home/buildroot/autobuild/instance-0/output-1/build/putty-0.78/callback.c:8:
/home/buildroot/autobuild/instance-0/output-1/build/putty-0.78/unix/platform.h:11:10: fatal error: dlfcn.h: No such file or directory
11 | #include <dlfcn.h> /* Dynamic library loading */
| ^~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/06f0b14bd0414f97b06070198e290fb3253348c5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following wolfssl build failure raised at least since bump to
version 7.4.0 in commit 6b5907bf65:
/home/autobuild/autobuild/instance-4/output-1/build/rtty-8.1.0/src/ssl/openssl.c: In function 'ssl_last_error_string':
/home/autobuild/autobuild/instance-4/output-1/build/rtty-8.1.0/src/ssl/openssl.c:143:24: error: implicit declaration of function 'ERR_peek_error_line_data'; did you mean 'wolfSSL_ERR_get_error_line_data'? [-Werror=implicit-function-declaration]
143 | ssl_err_code = ERR_peek_error_line_data(&file, &line, &data, &flags);
| ^~~~~~~~~~~~~~~~~~~~~~~~
| wolfSSL_ERR_get_error_line_data
Fixes:
- http://autobuild.buildroot.org/results/9db9f1dcc6760de4b78771bb79f109c4efd06c36
- http://autobuild.buildroot.org/results/16422af9469de114e552124542508c3b18ea8f19
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: don't force wolfssl-all]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Upstream re-released the v0.1.8 tarballs with autotools related stuff. [1]
That makes the hash test to fail:
ERROR: while checking hashes from package/libusb-compat//libusb-compat.hash
ERROR: libusb-compat-0.1.8.tar.bz2 has wrong sha256 hash:
ERROR: expected: 698c76484f3dec1e0175067cbd1556c3021e94e7f2313ae3ea6a66d900e00827
ERROR: got : b692dcf674c070c8c0bee3c8230ce4ee5903f926d77dc8b968a4dd1b70f9b05c
ERROR: Incomplete download, or man-in-the-middle (MITM) attack
Update the hash and drop LIBUSB_COMPAT_AUTORECONF.
[1] https://github.com/libusb/libusb-compat-0.1/issues/28#issuecomment-1759400548
[Peter: use .tar.gz to not conflict with s.b.o]
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This bump will fix the following build failure thanks to
https://github.com/trabucayre/openFPGALoader/commit/933ed793e85dea7e16ddd6540791097fd3a299f5:
In file included from /home/buildroot/autobuild/instance-3/output-1/build/openfpgaloader-0.10.0/src/jtag.hpp:13,
from /home/buildroot/autobuild/instance-3/output-1/build/openfpgaloader-0.10.0/src/device.hpp:13,
from /home/buildroot/autobuild/instance-3/output-1/build/openfpgaloader-0.10.0/src/efinix.hpp:11,
from /home/buildroot/autobuild/instance-3/output-1/build/openfpgaloader-0.10.0/src/efinix.cpp:6:
/home/buildroot/autobuild/instance-3/output-1/build/openfpgaloader-0.10.0/src/board.hpp:49:9: error: 'uint8_t' does not name a type
49 | uint8_t tms_pin; /*! TMS pin value */
| ^~~~~~~
/home/buildroot/autobuild/instance-3/output-1/build/openfpgaloader-0.10.0/src/board.hpp:12:1: note: 'uint8_t' is defined in header '<cstdint>'; did you forget to '#include <cstdint>'?
11 | #include "cable.hpp"
+++ |+#include <cstdint>
12 |
https://github.com/trabucayre/openFPGALoader/releases/tag/v0.11.0
Fixes:
- http://autobuild.buildroot.org/results/ee89dcc7430079195e2e9ff300e1320de848d3e3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update README hash for changed not related to license.
Change patch 0001 to git format. socat is now hosted on git. Also,
update to apply to current version.
Add upstream status to both patches.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Although pydantic-core likely implements a subset of the functionality
in pydantic 1.10.8 as we currently package, there will not be any
conflict as the modules namespace differ:
import pydantic # 1.10.8
import pydantic_core
So, we can add pydantic-core, then bump pydantic; we don't need to do
both in the same commit.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr: add explanations from James about no-conflict]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
These variables were removed. In addition, the text describing them
wasn't terribly useful. Just remove the sentences describing them.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The _BASE_INSTALL*_CMD variables are set based on the setup type, and
only based on the setup type. Because of this, we have a large
conditional tree in inner-python-package which makes things hard to
read.
Rather than conditions, it's also possible to use indirect variables.
Concretely, we can define PKG_PYTHON_DISTUTILS_INSTALL_TARGET_CMD etc.,
and use $(PKG_PYTHON_$($(PKG)_SETUP_TYPE)_INSTALL_TARGET_CMD) instead of
$($(PKG)_BASE_INSTALL_TARGET_CMD) to dispatch to the right
_INSTALL_TARGET_CMD variable. The same applies to _INSTALL_STAGING_CMD
and HOST_..._INSTALL_CMD.
Since the _INSTALL*_OPTS variables are not (or no longer) used anywhere
else, we can fold them into the _INSTALL*_CMD variables.
setuptools-rust, flit and maturin didn't have their own definition of
_BUILD_CMD but were under the setuptools resp. pep517 condition. For
these, we have to define new variables that copy the value from
PKG_PYTHON_SETUPTOOLS_BUILD_CMD resp. PKG_PYTHON_PEP517_BUILD_CMD.
The condition tree is now empty, except for the error handling. Rework
the conditions for the error handling and remove all other conditions.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In a follow-up patch, we want to remove this variable. Replace it with
its expansion, which is anyway just
$(PKG_PYTHON_SETUPTOOLS_INSTALL_OPTS) --root=$(TARGET_DIR)
Also remove PKG_PYTHON_SETUPTOOLS_BUILD_OPTS, which is not defined (i.e.
empty).
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In a follow-up patch, we want to remove this variable. Replace it with
its expansion, which is anyway just
$(PKG_PYTHON_SETUPTOOLS_INSTALL_OPTS) --root=$(TARGET_DIR)
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
[yann.morin.1998@free.fr:
- fixup after introduction of JAILHOUSE_INSTALL_HELPER_SCRIPTS
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The usual way of having conditional build and installation of parts
of a generic-package, is to conditionally define macros that do that
build and installation, and unconditionally expand the macros in the
_BUILD_CMDS and _INSTALL_CMDS.
Do that in jailhouse, which used to use an ad-hoc conditional block
directly in _BUILD_CMDS and _INSTALL_CMDS.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
host-python-flit-core is the only package that overrides
_BASE_INSTALL_CMD. Since we're going to remove that variable in a
follow-up patch, we no longer will be able to do that.
Since host-python-flit-core is really a special case, it makes sense to
define HOST_PYTHON_FLIT_CORE_INSTALL_CMDS in its entirety.
While we're at it, also instantiate
HOST_PKG_PYTHON_PEP517_BOOTSTRAP_INSTALL_OPTS directly there. This
variable is not used anywhere else, and it's a bit confusing to have it
in pkg-python.mk - it looks like a mistake.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The _BASE_BUILD_CMD variable is set based on the setup type, and only
based on the setup type. Because of this, we have a large conditional
tree in inner-python-package which makes things hard to read.
Rather than conditions, it's also possible to use indirect variables.
Concretely, we can define PKG_PYTHON_DISTUTILS_BUILD_CMD etc., and use
$(PKG_PYTHON_$($(PKG)_SETUP_TYPE)_BUILD_CMD) instead of
$($(PKG)_BASE_BUILD_CMD) to dispatch to the right _BUILD_CMD variable.
Once we do the same for all other variables that are set in the
condition tree, we'll be able to remove the condition tree entirely.
setuptools-rust, flit and maturin didn't have their own definition of
_BUILD_CMD but were under the setuptools resp. pep517 condition. For
these, we have to define new variables that copy the value from
PKG_PYTHON_SETUPTOOLS_BUILD_CMD resp. PKG_PYTHON_PEP517_BUILD_CMD.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The _BASE_ENV variable is set based on the setup type, and only based on
the setup type. Because of this, we have a large conditional tree in
inner-python-package which makes things hard to read.
Rather than conditions, it's also possible to use indirect variables.
Concretely, we can use $(PKG_PYTHON_$($(PKG)_SETUP_TYPE)_ENV) instead
of $($(PKG)_BASE_ENV) to dispatch to the right ENV variable.
Once we do the same for all other variables that are set in the
condition tree, we'll be able to remove the condition tree entirely.
Because $($(PKG)_SETUP_TYPE) is lowercase (e.g. 'setuptools' or
'pep517'), while the existing _ENV variables have uppercase names (e.g.
PKG_PYTHON_SETUPTOOLS_ENV), we need to convert the setup type to
uppercase. Introduce the variable $(PKG)_SETUP_TYPE_UPPER for this.
flit was reusing the _BASE_ENV definition from pep517, and flit-bootstrap
also didn't have its own _ENV definition yet, so those have to be added.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Only define the _CMDS variables that are relevant for the target resp.
host variant. Duplicate the _BUILD_CMDS. This will allow us to
differentiate part of the _BUILD_CMDS definition in a follow-up patch.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This variable can just as well be merged into _BASE_BUILD_CMD. This is
how it's done for the install opts. And anyway it's only used by
distutils and nowhere else.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is a leftover from python 2/3. Since the interpreter is now always
python3, we can simply call it like that - like is done in all the other
places where python is called.
While we're at it, call python3 explicitly rather than relying on the
symlink.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
These packages don't have a setup.py so we instead need to parse their
pyproject.toml file.
It is possible that such a package does not define a project_urls config
item, so ensure we do not choke on it (None.get() would raise).
Note that this currently doesn't handle flit package dependency
resolution.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[yann.morin.1998@free.fr:
- add sentence about the project_urls rewrite
- fix flake8 errors
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- bumped package version to 6.20
- as 6.20 prebuilt version is not available on same download site but
source code is released at https://github.com/memtest86plus/memtest86plus/releases
so updated mk file to download source from git release
- prebuilt binary not found in 6.20 package and also README.md
does not mention any toolchain limitation for compilation
so added source build command depending on 32-bit or 64-bit x86 target.
- corrected License file name
- installed memtest binaries to image folder like other bootable
images(grub , kernel) are copied.
- updated config help as per package README.md
Signed-off-by: Kalpesh Panchal <kalpesh.panchal2@collins.com>
Signed-off-by: Abhishek Anand <abhishek.anand@collins.com>
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
[yann.morin.1998@free.fr:
- fix check-package errors
- fix hash file
- better install commands
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Peter Korsgaard