Fix the following static build failure raised since bump to version
1.1.4 in commit 7205df8a4f:
CMake Error at /home/autobuild/autobuild/instance-13/output-1/build/libmemcached-1.1.4/src/bin/cmake_install.cmake:60 (file):
file RPATH_CHANGE could not write new RPATH:
$ORIGIN/../lib
to the file:
/home/autobuild/autobuild/instance-13/output-1/host/arc-buildroot-linux-uclibc/sysroot/usr/bin/memcapable
No valid ELF RPATH or RUNPATH entry exists in the file;
Call Stack (most recent call first):
/home/autobuild/autobuild/instance-13/output-1/build/libmemcached-1.1.4/src/cmake_install.cmake:52 (include)
/home/autobuild/autobuild/instance-13/output-1/build/libmemcached-1.1.4/cmake_install.cmake:52 (include)
Fixes:
- http://autobuild.buildroot.org/results/778ff517d465896f54a3cd5316a66c54f66fd4cb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
--with-ssl-dir will exclusively search for dynamic library so use
--with-ssl-static to fix the following openssl static build failure
raised since bump to version 5.33.0 in commit
8cedb39764:
checking for static SSL support... disabled
checking for SSL support... enabled
checking for SSL include directory... /home/buildroot/autobuild/instance-2/output-1/host/mipsel-buildroot-linux-uclibc/sysroot/usr/include
checking for SSL library directory... /lib64
[...]
mipsel-buildroot-linux-uclibc-gcc: ERROR: unsafe header/library path used in cross-compilation: '-L/lib64'
Fixes:
- http://autobuild.buildroot.org/results/4189decbafb5d28c11d89ddac792b4610abeaff1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The defconfig fetches Linux and U-Boot from a git repo using the
unauthenticated git:// protocol, so add download hashes for them to ensure
we get the right sources by adding a global patch dir and running
utils/add-custom-hashes.
The defconfig uses the Linux sources for the kernel headers, so make
linux-headers/linux-headers.hash a symlink to linux/linux.hash so the same
hash file is used.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with gcc >= 12:
task.c: In function 't_start':
task.c:398:16: error: 'ret' may be used uninitialized [-Werror=maybe-uninitialized]
398 | return ret;
| ^~~
task.c:364:13: note: 'ret' was declared here
364 | int ret;
| ^~~
task.c: In function 't_resume':
task.c:444:16: error: 'ret' may be used uninitialized [-Werror=maybe-uninitialized]
444 | return ret;
| ^~~
task.c:428:13: note: 'ret' was declared here
428 | int ret;
| ^~~
Fixes:
- http://autobuild.buildroot.org/results/bc1b40de22e563b704ad7f20b6bf4d1f73a6ed8a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following NLS build failure raised since the addition of the
package in commit 9f4f8c5f89:
/home/buildroot/autobuild/run/instance-2/output-1/host/lib/gcc/arm-buildroot-linux-musleabihf/12.3.0/../../../../arm-buildroot-linux-musleabihf/bin/ld: ../../src/common/.libs/libcommon.a(libcommon_la-i18n.o): undefined reference to symbol 'libintl_bindtextdomain'
Fixes:
- http://autobuild.buildroot.org/results/8ab13cf474d732c95a1da65592d950b24b3d474b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with gcc 4.8 raised since bump to
version 1.1.4 in commit 7205df8a4f:
/home/buildroot/autobuild/run/instance-0/output-1/build/libmemcached-1.1.4/src/libmemcachedprotocol/ascii_handler.c: In function 'ascii_get_response_handler':
/home/buildroot/autobuild/run/instance-0/output-1/build/libmemcached-1.1.4/src/libmemcachedprotocol/ascii_handler.c:249:3: error: 'for' loop initial declarations are only allowed in C99 mode
for (int x = 0; x < keylen; ++x) {
^
Fixes:
- http://autobuild.buildroot.org/results/202aeec4dda822ac341d8882f84f968a303697c3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I am no longer work at Synopsys, so remove this email address.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised since bump to version 1.1.4 in
commit 7205df8a4f:
/home/buildroot/autobuild/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/11.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: CMakeFiles/aslap.dir/ms_conn.c.o: undefined reference to symbol '__atomic_fetch_add_4@@LIBATOMIC_1.0'
Fixes:
- http://autobuild.buildroot.org/results/c8e4e1f9609d1339fe070afe440c63660892600e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
fix CVE-2023-47038 - Write past buffer end via illegal user-defined Unicode property
note: 5.36.2 was a broken release
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2023-38703: PJSIP is a free and open source multimedia
communication library written in C with high level API in C, C++, Java,
C#, and Python languages. SRTP is a higher level media transport which
is stacked upon a lower level media transport such as UDP and ICE.
Currently a higher level transport is not synchronized with its lower
level transport that may introduce use-after-free issue. This
vulnerability affects applications that have SRTP capability
(`PJMEDIA_HAS_SRTP` is set) and use underlying media transport other
than UDP. This vulnerability’s impact may range from unexpected
application termination to control flow hijack/memory corruption. The
patch is available as a commit in the master branch.
https://github.com/pjsip/pjproject/security/advisories/GHSA-f76w-fh7c-pc66https://github.com/pjsip/pjproject/releases/tag/2.14
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following static build failure raised since bump to version 0.78
in commit 5673ea3ce4:
In file included from /home/buildroot/autobuild/instance-0/output-1/build/putty-0.78/putty.h:8,
from /home/buildroot/autobuild/instance-0/output-1/build/putty-0.78/callback.c:8:
/home/buildroot/autobuild/instance-0/output-1/build/putty-0.78/unix/platform.h:11:10: fatal error: dlfcn.h: No such file or directory
11 | #include <dlfcn.h> /* Dynamic library loading */
| ^~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/06f0b14bd0414f97b06070198e290fb3253348c5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following wolfssl build failure raised at least since bump to
version 7.4.0 in commit 6b5907bf65:
/home/autobuild/autobuild/instance-4/output-1/build/rtty-8.1.0/src/ssl/openssl.c: In function 'ssl_last_error_string':
/home/autobuild/autobuild/instance-4/output-1/build/rtty-8.1.0/src/ssl/openssl.c:143:24: error: implicit declaration of function 'ERR_peek_error_line_data'; did you mean 'wolfSSL_ERR_get_error_line_data'? [-Werror=implicit-function-declaration]
143 | ssl_err_code = ERR_peek_error_line_data(&file, &line, &data, &flags);
| ^~~~~~~~~~~~~~~~~~~~~~~~
| wolfSSL_ERR_get_error_line_data
Fixes:
- http://autobuild.buildroot.org/results/9db9f1dcc6760de4b78771bb79f109c4efd06c36
- http://autobuild.buildroot.org/results/16422af9469de114e552124542508c3b18ea8f19
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: don't force wolfssl-all]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Upstream re-released the v0.1.8 tarballs with autotools related stuff. [1]
That makes the hash test to fail:
ERROR: while checking hashes from package/libusb-compat//libusb-compat.hash
ERROR: libusb-compat-0.1.8.tar.bz2 has wrong sha256 hash:
ERROR: expected: 698c76484f3dec1e0175067cbd1556c3021e94e7f2313ae3ea6a66d900e00827
ERROR: got : b692dcf674c070c8c0bee3c8230ce4ee5903f926d77dc8b968a4dd1b70f9b05c
ERROR: Incomplete download, or man-in-the-middle (MITM) attack
Update the hash and drop LIBUSB_COMPAT_AUTORECONF.
[1] https://github.com/libusb/libusb-compat-0.1/issues/28#issuecomment-1759400548
[Peter: use .tar.gz to not conflict with s.b.o]
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This bump will fix the following build failure thanks to
https://github.com/trabucayre/openFPGALoader/commit/933ed793e85dea7e16ddd6540791097fd3a299f5:
In file included from /home/buildroot/autobuild/instance-3/output-1/build/openfpgaloader-0.10.0/src/jtag.hpp:13,
from /home/buildroot/autobuild/instance-3/output-1/build/openfpgaloader-0.10.0/src/device.hpp:13,
from /home/buildroot/autobuild/instance-3/output-1/build/openfpgaloader-0.10.0/src/efinix.hpp:11,
from /home/buildroot/autobuild/instance-3/output-1/build/openfpgaloader-0.10.0/src/efinix.cpp:6:
/home/buildroot/autobuild/instance-3/output-1/build/openfpgaloader-0.10.0/src/board.hpp:49:9: error: 'uint8_t' does not name a type
49 | uint8_t tms_pin; /*! TMS pin value */
| ^~~~~~~
/home/buildroot/autobuild/instance-3/output-1/build/openfpgaloader-0.10.0/src/board.hpp:12:1: note: 'uint8_t' is defined in header '<cstdint>'; did you forget to '#include <cstdint>'?
11 | #include "cable.hpp"
+++ |+#include <cstdint>
12 |
https://github.com/trabucayre/openFPGALoader/releases/tag/v0.11.0
Fixes:
- http://autobuild.buildroot.org/results/ee89dcc7430079195e2e9ff300e1320de848d3e3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update patch to fix the following musl build failure with m68k which is
only raised (for an unknown reason) since bump to version 2.7.1 in commit
3e48f8358e:
In file included from fp.c:6:
fp-gnum68k.c:21:10: fatal error: fpu_control.h: No such file or directory
21 | #include <fpu_control.h>
| ^~~~~~~~~~~~~~~
Add also upstream link to first patch iteration which was sent in
November 2022 but didn't get it any reply (like most of the other emails
sent to bug-gsl@gnu.org ...)
Fixes:
- http://autobuild.buildroot.org/results/e59636f6ac148807c1c67f09eef0e0a9f5d52303
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix issues spotted by Yann E. Morin in commit
ca169d1d0a:
- BR2_TOOLCHAIN_BUILDROOT_UCLIBC -> BR2_TOOLCHAIN_USES_UCLIBC
- Add dependency to openrc package and not only to init system
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 2cfa86a54882(package/erlang: bump version to 26.0.2) added a
patch to restore building on uClibc.
However, that patch is not upstream, and has been rejected:
https://github.com/erlang/otp/pull/7500
Please open a PR to https://github.com/asmjit/asmjit instead and we
will get the fix next time we sync with upstream. We do not want
theirs and our implementation to diverge.
Furthermore, it happens to work on uClibc, because uClibc does not
expose sys/auxv.h, but it fails to work on glibc, because the define is
not propagated to "sub-trees", and thus is never defined where it is
checked for, even when sys/auxv.h is available. This causes build
failures such as:
asmjit/core/cpuinfo.cpp: In function ‘void asmjit::_abi_1_10::detectHWCaps(CpuInfo&, long unsigned int, const LinuxHWCapMapping*, size_t)’:
asmjit/core/cpuinfo.cpp:840:24: error: ‘getauxval’ was not declared in this scope
840 | unsigned long mask = getauxval(type);
| ^~~~~~~~~
asmjit/core/cpuinfo.cpp: In function ‘void asmjit::_abi_1_10::detectARMCpu(CpuInfo&)’:
asmjit/core/cpuinfo.cpp:972:21: error: ‘AT_HWCAP’ was not declared in this scope
972 | detectHWCaps(cpu, AT_HWCAP, hwCapMapping, ASMJIT_ARRAY_SIZE(hwCapMapping));
| ^~~~~~~~
asmjit/core/cpuinfo.cpp:973:21: error: ‘AT_HWCAP2’ was not declared in this scope
973 | detectHWCaps(cpu, AT_HWCAP2, hwCapMapping2, ASMJIT_ARRAY_SIZE(hwCapMapping2));
| ^~~~~~~~~
Yet, sys/auxv.h was detected at configure time:
checking for sys/auxv.h... yes
This defconfig is enough to reproduce the error:
BR2_aarch64=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
BR2_PACKAGE_ERLANG=y
Since upstream refused the patch, and there is no fix that was submitted
to the actual upstream (asmjit), drop the rejectred patch, and disable
for uClibc: the patch is incorrect, and we can't fix a build issue on
uClibc by introducing another on glibc.
Fixes:
http://autobuild.buildroot.org/results/fc1/fc19bad2263bdfacea594217d5ddfde0e27895b1/http://autobuild.buildroot.org/results/114/11416d81d5b27fc0627b335a971154c088d5754a/
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Bernd Kuhls <bernd@kuhls.net>
Cc: Maxim Kochetkov <fido_max@inbox.ru>
Changes v1 -> v2:
- update comment when unavailable
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
fix CVE-2023-47038 - Write past buffer end via illegal user-defined Unicode property
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
openrc raises the following uclibc build failures since bump to version
0.51 in commit 730c90faa3:
../src/rc-abort/rc-abort.c: In function 'main':
../src/rc-abort/rc-abort.c:27:21: error: implicit declaration of function 'kill'; did you mean 'killpg'? [-Werror=implicit-function-declaration]
27 | if (kill(pid, SIGUSR1) != 0)
| ^~~~
| killpg
../src/libeinfo/libeinfo.c: In function 'colour_terminal':
../src/libeinfo/libeinfo.c:319:26: error: implicit declaration of function 'fileno' [-Werror=implicit-function-declaration]
319 | if (f && !isatty(fileno(f)))
| ^~~~~~
../src/librc/librc-misc.c: In function 'rc_getfile':
../src/librc/librc-misc.c:79:14: error: implicit declaration of function 'fileno'; did you mean 'd_fileno'? [-Werror=implicit-function-declaration]
79 | fd = fileno(fp);
| ^~~~~~
| d_fileno
../src/librc/librc-daemon.c: In function 'rc_service_daemons_crashed':
../src/librc/librc-daemon.c:633:37: error: implicit declaration of function 'kill'; did you mean 'killpg'? [-Werror=implicit-function-declaration]
633 | if (kill(pid, 0) == -1 && errno == ESRCH)
| ^~~~
| killpg
These build failures could be fixed by patching openrc but upstream
is not happy with this patch: https://github.com/OpenRC/openrc/pull/674.
So, as advised by Yann E. Morin, openrc is hidden away for uClibc, until
upstream has a proper fix.
Fixes:
- http://autobuild.buildroot.org/results/494ef392a971ddb3c5c7b01e0149c6439018dbe7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2023-45322: libxml2 through 2.11.5 has a use-after-free that can
only occur after a certain memory allocation fails. This occurs in
xmlUnlinkNode in tree.c. NOTE: the vendor's position is "I don't think
these issues are critical enough to warrant a CVE ID ... because an
attacker typically can't control when memory allocations fail."
https://gitlab.gnome.org/GNOME/libxml2/-/blob/v2.11.6/NEWS
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2023-46852: In Memcached before 1.6.22, a buffer overflow exists
when processing multiget requests in proxy mode, if there are many
spaces after the "get" substring.
Fix CVE-2023-46853: In Memcached before 1.6.22, an off-by-one error
exists when processing proxy requests in proxy mode, if \n is used
instead of \r\n.
https://github.com/memcached/memcached/wiki/ReleaseNotes1622
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2023-47359: Videolan VLC prior to version 3.0.20 contains an
incorrect offset read that leads to a Heap-Based Buffer Overflow in
function GetPacket() and results in a memory corruption.
Fix CVE-2023-47360: Videolan VLC prior to version 3.0.20 contains an
Integer underflow that leads to an incorrect packet length.
https://code.videolan.org/videolan/vlc/-/blob/3.0.20/NEWS
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the favicon image was added in f26e61319f (docs/website: add
favicon.png), it was added to a different directory then where the header's
icon link points. This causes the favicon to fail to load with 404.
While we are here, remove the "shortcut" rel attribute as it is non-standard
and it's recommended not to use it[1].
[1] https://developer.mozilla.org/en-US/docs/Web/HTML/Attributes/rel#sect4
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised since bump of webp to version
1.3.2 in commit c88c1d3319:
/home/autobuild/autobuild/instance-9/output-1/host/lib/gcc/aarch64_be-buildroot-linux-uclibc/13.2.0/../../../../aarch64_be-buildroot-linux-uclibc/bin/ld: picture.o: undefined reference to symbol 'WebPMemoryWriterClear'
/home/autobuild/autobuild/instance-9/output-1/host/lib/gcc/aarch64_be-buildroot-linux-uclibc/13.2.0/../../../../aarch64_be-buildroot-linux-uclibc/bin/ld: /home/autobuild/autobuild/instance-9/output-1/host/aarch64_be-buildroot-linux-uclibc/sysroot/usr/lib64/libwebp.so.7: error adding symbols: DSO missing from command line
Fixes:
- http://autobuild.buildroot.org/results/9b859a701debeaddf1f9909e16adc6811a620576
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure with libressl >= 3.8 raised since bump
of libressl to version 3.8.2 in commit
21eca49ed5:
In file included from card-westcos.c:37:
/home/autobuild/autobuild/instance-11/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/openssl/evp.h:627:32: error: macro "EVP_sha3_224" passed 1 arguments, but takes just 0
627 | const EVP_MD *EVP_sha3_224(void);
| ^
Fixes:
- http://autobuild.buildroot.org/results/cecee659371f370bf4bd2b27a4752bf20ceff326
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The following build failure without stack-protector occurs since commit
160f0e4b5f (package/libpam-tacplus: bump to version 1.7.0):
cc1: warning: '-fstack-protector' not supported for this target
In file included from libtac/lib/xstrncpy.c:36:
libtac/lib/xstrncpy.c: In function 'xstrncpy':
./libtac/include/libtac.h:71:15: error: called object is not a function or function pointer
71 | #define abort exit(EXIT_FAILURE)
| ^~~~
Since we are passing the appropriate SSP and fortify flags via our
toolchain wrapper, we need to tell the package not to add its own.
Upstream commit b1054ad8bb33 (Add '--disable-am-ldcflags' configure
option), available since version 1.4.1, has been added for "a
distribution to select its own C/LD flags" which is exactly our
situation.
So that's what we do: replace the ax cache variable by this new
configure flag.
Fixes:
- http://autobuild.buildroot.org/results/cc8a7c5cca65e002d40a775f09e3c4577fbab5b7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In commit 13fc9dcb34, netsnmp was bumped
from 5.9.3 to 5.9.4 to fix two CVEs.
However, even though it's a minor version bump, there are actually 163
commits upstream between those two minor releases, and some of them
are breaking existing use-cases. In particular upstream
a2cb167514ac0c7e1b04e8f151e0b015501362e0 now requires that config_()
macros in MIB files are terminated with a semicolon, causing a build
breakage with existing MIB files that were totally valid with 5.9.3.
This commit therefore proposes to revert back to 5.9.3, by reverting
those two commits:
56caafceab package/netsnmp: fix musl build
13fc9dcb34 package/netsnmp: security bump to version 5.9.4
and instead backport the one upstream commit that fixes both CVEs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: fix typo as reported by Baruch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Git-generated patches embed the short-hash of the objects in the
repository. The length of those short hashes are subject to change
in at least three cases:
- the number of objects in the repository increases, so git increases
the length of short hashes to get a good change there is no
collision;
- the git configuration changes, see core.abbrev in git-config;
- the heuristic to compute the length changes in a newer git version.
Since the bump to zfs 2.1.4 in commit 68dfd09708, the patch generated
by github has changed, causing download failures:
wget --passive-ftp -nd -t 3 -O '/home/ymorin/dev/buildroot/O/master/build/.bc3f12bfac152a0c28951cec92340ba14f9ccee9.patch.uoFq9e/output' 'https://github.com/openzfs/zfs/commit/bc3f12bfac152a0c28951cec92340ba14f9ccee9.patch'
--2023-11-26 16:53:25--
https://github.com/openzfs/zfs/commit/bc3f12bfac152a0c28951cec92340ba14f9ccee9.patch
Resolving github.com (github.com)... 140.82.121.3
Connecting to github.com (github.com)|140.82.121.3|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 2976 (2.9K) [text/plain]
Saving to: ‘/home/ymorin/dev/buildroot/O/master/build/.bc3f12bfac152a0c28951cec92340ba14f9ccee9.patch.uoFq9e/output’
/home/ymorin/dev/buildroot/O/ 100%[================================================>] 2.91K --.-KB/s in 0s
2023-11-26 16:53:25 (15.0 MB/s) - ‘/home/ymorin/dev/buildroot/O/master/build/.bc3f12bfac152a0c28951cec92340ba14f9ccee9.patch.uoFq9e/output’ saved [2976/2976]
ERROR: while checking hashes from package/zfs//zfs.hash
ERROR: bc3f12bfac152a0c28951cec92340ba14f9ccee9.patch has wrong sha256 hash:
ERROR: expected: 96a27353fe717ff2c8b95deb8b009c4eb750303c6400e2d8a2582ab1ec12b25a
ERROR: got : 246c80f66abca5a7e0c41cc7c56eec0b4cb7f16b142262480401142bbc2f999f
ERROR: Incomplete download, or man-in-the-middle (MITM) attack
And indeed, the length of short hashes has increased by one since then.
Fix that by bundling the patch, with the short hashes that were known
then, so that it matches the sha256 we had for it.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
gcc.mk attempts to disable building the documentation by setting
MAKEINFO=missing, but it is not working. If makeinfo is installed
and recent enough, gcc still uses it. This can be checked easily:
grep BUILD_INFO='info' host-gcc-initial-*/build/gcc/config.log
It happens because the root ./configure script will check
$MAKEINFO --version (aka 'missing --version') and will overwrite it with
MAKEINFO='missing makeinfo' because the version does not match.
Having MAKEINFO='missing makeinfo' is a problem because
'missing makeinfo' will actually attempt to run 'makeinfo' before
failing with an error message. If makeinfo is installed on the host,
then 'missing makeinfo' will successfully run makeinfo anyway.
Many gcc subprojects will check $MAKEINFO --version and enable building
the documentation if it is recent enough. This patch overrides these
checks by forcing gcc_cv_prog_makeinfo_modern=no.
Building the GCC documentation can fail with the wrong makeinfo version.
It happened at least when building GCC 11.3.0 with makeinfo 7.1.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following uclibc build failure raised since the addition of the
package in commit d5bba26801:
In file included from /home/autobuild/autobuild/instance-4/output-1/build/oatpp-1.3.0/src/oatpp/algorithm/CRC.hpp:28,
from /home/autobuild/autobuild/instance-4/output-1/build/oatpp-1.3.0/src/oatpp/algorithm/CRC.cpp:25:
/home/autobuild/autobuild/instance-4/output-1/build/oatpp-1.3.0/src/oatpp/core/base/Environment.hpp:359:93: error: 'va_list' has not been declared
359 | static void vlogFormatted(v_uint32 priority, const std::string& tag, const char* message, va_list args);
| ^~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/bcdf7548ff752f936defd111d13c63245ea70cbe
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NodeJS requires GCC 10.1. However, GCC 10.1 is the first release of the
GCC 10.x series. As such, we can safely downgrade the GCC version
requirements to 10.
Tested with: run-tests tests.package.test_nodejs using Debian 11 and
gcc 10.2.1.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Without this patch, the devicetree used by linux at runtime is
the u_boot devicetree.
While using rusticl on the khadas vim3 board with the default
extlinux.conf, mesa's panfrost driver return "gpu shed timeout"
errors. Adding "devicetree /meson-g12b-khadas-vim3.dtb" to the
extlinux.conf file solve the problem. Linux successfully boot
with and without the change but without this patch the devicetree
used by linux at runtime is the u-boot devicetree.
The differences between the u-boot devicetree and the linux
devicetree are:
-The u-boot devicetree contains two more nodes than the linux devicetree. Those nodes are:
- smbios : compatible option is set to "u-boot,sysinfo-smbios".
- __symbols__ : present if -@ or --symbols is used during the devicetree compilation.
-Most of u-boot devicetree nodes have a "phandle" property.
-SoC and vpu have a "u-boot,dm-pre-reloc;" property.
-Some aliases are different.
-The u-boot operating points tables contains more nodes.
The size difference between the u-boot devicetree and the linux
devicetree is approximately 3.5kB.
During runtime, the linux devicetree have the "phandle" and
"u-boot,dm-pre-reloc;" properties and the smbios node. So,
The runtime devicetree is the one from u-boot.
Signed-off-by: Antoine Coutant <antoine.coutant@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
flutter-engine will forcibly create ~/.dart/ and ~/.flutter/ and store
stuff in there.
This is however quite dirty and pollutes the user's home, and will also
not work when the home is read-only (e.g. shared in a container).
Forcibly redirect flutter-engine to the same location where we
redirected host-flutter-sdk-bin, using the same trick of redefining
HOME as for host-flutter-sdk-bin.
Ideally, we'd like to have some way to share this with all flutter-based
packages, but we so far have only a few of them, so it is too early to
even think about some commonalities (even less so about a shared infra).
So we just duplicate the setting for now, this can be revisited later.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes CVE-2022-48303: GNU Tar through 1.34 has a one-byte out-of-bounds read
that results in use of uninitialized memory for a conditional jump.
Exploitation to change the flow of control has not been demonstrated. The
issue occurs in from_header in list.c via a V7 archive in which mtime has
approximately 11 whitespace characters.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: add _IGNORE_CVES entry]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit d4d483451f.
Tar 1.35 unfortunately changes the behaviour for the devmajor/devminor
fields, breaking the download hash validation. From the release notes:
* Leave the devmajor and devminor fields empty (rather than zero) for
non-special files, as this is more compatible with traditional tar.
https://lists.gnu.org/archive/html/info-gnu/2023-07/msg00005.html
So revert the bump for now.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 7f1088f9ca.
We're going back to tar 1.34, so this needs to be reverted as well.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 083e65a67c introduced tests for the
various read-only root options under systemd, but while applying the
fs-overlay that is used in one of the tests wasn't included. Include it
now.
Fixes: 083e65a67c
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Fixes:
http://autobuild.buildroot.net/results/98f/98fedf4969c260f73a01b937b9625e66dcd86b3c
When BR2_TOOLCHAIN_HAS_LIBATOMIC is "n", there is no gcc libatomic.so
library to install. For configurations with such settings, compilation
fails as gcc-final.mk unconditionally adds libatomic as an installation
target. This error, for instance, shows for all Canaan K210 riscv
configs, as they all use uclibc flat binary format which disabled
libatomic:
Fix this by modifying package/gcc/gcc-final/gcc-final.mk to add
libatomic to GCC_FINAL_LIBS only for configurations that have
BR2_TOOLCHAIN_HAS_LIBATOMIC set to "y".
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Stripping when cross-compiling and libtool static behavior are fixed in
2.5.16, so drop 0001-fix_cross_strip.patch and rename the remaining patches.
Signed-off-by: Hmaied Ben Abdellatif <hmaied.benabdellatif@etictelecom.com>
[Peter: extend commit message, update .checkpackageignore]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a script to manage the .hash files in the BR2_GLOBAL_PATCH_DIR for
packages using custom versions.
To use it, run in a configured Buildroot directory, E.G.
make foo_defconfig; ./utils/add-custom-hashes
We support multiple patch directories in BR2_GLOBAL_PATCH_DIR. If multiple
directories are specified then use the last one as that is likely to be the
most specific one.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: silence command -v invocation]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump version of Linux to 6.1.61 and U-Boot to 2023.10.
U-Boot requires enabling pylibfdt and pyelftools
We need to increase the size of the rootfs, and we get rid of a
64bit warning on `mke2fs` by passing `-O 64bit` as an argument.
Signed-off-by: Roberto Medina <robertoxmed@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with gcc 5 raised since bump to version
0.17 in commit 725580a26e:
/home/thomas/autobuild/instance-2/output-1/build/json-c-0.17/json_pointer.c: In function 'json_pointer_result_get_recursive':
/home/thomas/autobuild/instance-2/output-1/build/json-c-0.17/json_pointer.c:193:25: error: 'idx' may be used uninitialized in this function [-Werror=maybe-uninitialized]
res->index_in_parent = idx;
^
Fixes:
- http://autobuild.buildroot.org/results/523b35a979d59121fe4e18c38171792b06233940
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default dhcpcd installed with 555 permissions as it is
configured in its Makefile.inc. Since 'w' bit is missing,
strip fails and dhcpcd binary installed non-stripped.
On ARM GCC 12 glibc configuration strip saves over 1MB of disk space.
Signed-off-by: Oleg Lyovin <ovlevin@salutedevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Switch to setuptools
- Update License hash due to a year change: 2019 -> 2021
- Install the packages to the site-packages directory, or else packages using
scons fail to build with import errors.
Tested with benejson, gpsd, and mongodb.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Used with the latest version of python-constantly. It is only needed as a
host package.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Remove the "# Should be kept in sync with $(SYSTEMD_VERSION)" line from
python-systemd.mk, as this package is not updated on a regular basis and does
not keep up to date with systemd.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Drop no longer required python-pyrsistent runtime dependency.
Add new python-jsonschema-specifications runtime dependency.
Add new python-referencing runtime dependency.
Add new python-rpds-py runtime dependency.
Propagate python-rpds-py target rust support requirement to
python-jsonschema reverse dependencies.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The last time python-pyxb was updated according to pypi.org is in 2017.
As there are no maintainers listed for the package, and the package uses
distutils which has been removed in Python 3.12.0, remove the package.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 2add559e50 (package/python-kmod: new package) listed LGPL-2.1+
(aka -or-later) as the licensed applicable. However, thode contains the
following blurbs:
# python-kmod is free software: you can redistribute it and/or modify it under
# the terms of the GNU Lesser General Public License version 2.1 as published
# by the Free Software Foundation.
There is no mention of the usual "or, at your option, any later
version".
As such, the license is reall LGPL-2.1-only.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This package is currently used in Fedora39 to provide python bindings
for kmod, and it is Python 3.12.0 compatible.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: LGPL in in COPYING.LESSER]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The python bindings provided by kmod were last updated 9 years ago.
- They are not compatible with Python 3.12.
- No major distribution uses this option.
Remove the option.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop patch and associated CVE ignore which is now upstream.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr: update .checkpackageignore]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Also, bump package/opencv4-contrib to in lock-step.
This addresses both CVE-2023-2617 and CVE-2023-2618, that have been
fixed in OpenCV 4.8.0.
Signed-off-by: Woodrow Douglass <wdouglass@carnegierobotics.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with musl raised since bump to version
2.9.0 in commit 8c70374c4f:
atop.h:157:1: error: unknown type name 'time_t'
157 | time_t normalize_epoch(time_t, long);
| ^~~~~~
atop.h:157:1: note: 'time_t' is defined in header '<time.h>'; did you forget to '#include <time.h>'?
atop.h:157:40: error: expected ')' before 'long'
157 | time_t normalize_epoch(time_t, long);
| ^~~~~
| )
Fixes:
- http://autobuild.buildroot.org/results/e7ec8d16f2299320f374a0198c8e9b18a102b037
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Instead of only checking .mk and Config.in{,.host}, check
all files in a package directory.
.checkpackageignore isn't considered here, therefore the shown number
includes ignored warnings as well.
Add another css class to signal some warning, compared to a lot (>5),
similar to patches.
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some packages are grouped and have a general makefile that defines
reusable variables. These makefiles have no relevant information for
pkg-stats and should be excluded.
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Go version 1.21.4 includes the following security fixes:
CVE-2023-45283: path/filepath: recognize \??\ as a Root Local Device path prefix.
CVE-2023-45284: path/filepath: recognize device names with trailing spaces and superscripts
https://go.dev/doc/devel/release#go1.21.4
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When installing node modules with native code, said code needs to be
built for the target; npm will delegate that to an internal copy of gyp,
node_gyp, which uses a python script to generate the build configuration
matching the target.
That script is generated by the nodejs build system (at configure time),
and eventually installed to staging alongside the headers.
Currently, we tell node_gyp to use the script in the nodejs build
directory, with the npm_config_nodedir environment variable:
npm_config_nodedir=$(BUILD_DIR)/nodejs-$(NODEJS_VERSION)
However, that is no longer working since commit 4cbc2af604
(package/nodejs: rename to nodejs-src and convert to virtual package),
for two reasons:
- the version variable NODEJS_VERSION was renamed to
NODEJS_COMMON_VERSION;
- the actual build directory is that of nodejs-src, not nodejs.
When installing node modules with NODEJS_SRC_MODULES_LIST, we happen to
still be running in the nodejs-src package, so it kinda makes sense that
we use the file in nodejs-src build directory. But the NPM macro can
also be called from other packages, in which case it looks uglier to
have to look into nosejs-src build dir from another package context.
Looking at the documentation for node-gyp [0], we can see that nodedir
is meant to point to the path of the node source code;
| `--nodedir=$path` | Set the path to the node source code
However, that is only valid when building natively; here we are more
similar to the "Third Party Node.js Runtimes", where the runtime nodejs
is not the one doing the build; in that case, the following looks more
appropriate:
[...] you
should use `--dist-url` or `--nodedir` flags to specify the headers of the
runtime to build for.
Also when `--dist-url` or `--nodedir` flags are passed, node-gyp will use the
`config.gypi` shipped in the headers distribution to generate build
configurations [...]
So, we are going that route, and point npm_config_nodedir to the staging
dir, where the headers are to be found. This is valid when installing
modules with NODEJS_SRC_MODULES_LIST, as nodejs is already installed in
staging at that time, as the package infra guarantees that staging is
installed before target; it alsop works for modules installed in later
packages (as long as they have nodejs in their dependencies, of course).
Fixes: https://bugs.busybox.net/show_bug.cgi?id=15826
[0] https://github.com/nodejs/node/blob/main/deps/npm/node_modules/node-gyp/README.md
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr:
- use STAGING_DIR/usr, not TARGET_DIR/usr
- extend commit log to explain what and why
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Node modules available on the npm registry, may contain prebuild
binaries for various targets and/or ABIs; for example., there might be
ARM. AArch64, x86_64 binaries for glibc or musl, for Linux or Darwin.
Needless to say, those binaries will most often not match the current
target architecture; as such, check-bin-arch will whine loudly as
reported in #15823:
ERROR: architecture for "/usr/lib/node_modules/node-red-node-serialport/node_modules/@serialport/bindings-cpp/prebuilds/linux-arm/node.napi.armv6.node" is "ARM", should be "AArch64"
ERROR: architecture for "/usr/lib/node_modules/node-red-node-serialport/node_modules/@serialport/bindings-cpp/prebuilds/android-arm/node.napi.armv7.node" is "ARM", should be "AArch64"
ERROR: architecture for "/usr/lib/node_modules/node-red-node-serialport/node_modules/@serialport/bindings-cpp/prebuilds/linux-arm/node.napi.armv7.node" is "ARM", should be "AArch64"
ERROR: architecture for "/usr/lib/node_modules/node-red-node-serialport/node_modules/@serialport/bindings-cpp/prebuilds/linux-x64/node.napi.glibc.node" is "Advanced Micro Devices X86-64", should be "AArch64"
ERROR: architecture for "/usr/lib/node_modules/node-red-node-serialport/node_modules/@serialport/bindings-cpp/prebuilds/linux-x64/node.napi.musl.node" is "Advanced Micro Devices X86-64", should be "AArch64"
The proper solution would be to remove all those prebuilt binaries, and
request npm to forcefully rebuild the proper binary for the current
architecture; alas, there is no option to tell npm to do so.
Doing it manually would not be easy either, as such modules might be
retrieved as part of the "vendoring" for another module that the user
has requested, and be pretty deep in the dependency chain; trying to fix
this properly would be a nightmare: it would require that we manually
inspect the depednency chain, and install dependent modules one by one,
recursively, re-implementing the same logic npm has when multiple
verions of the same module are installed as part of different branches
of the depenency tree, all while detecting prebuilds and removing them
before installing the mpdule (hence decorrelating download and install,
which is not trivial to do with npm alone).
We also can't simply remove all the prebuilds, because it is not known
whether the location ("<module>/prebuilds/") is standardised, or a
convention with the path noted somewhere in the package metadata, and
how deep they would be in the tree, and whether that could conflict with
arbitrary files...
Instead, we will consider that npm has a sane heuristic to detect
whether it should indeed rebuilt the modules, and that node has a sane
heuristic to know which binary to load at runtime, and we will leave the
prebuilt binaries in place and just exclude them from being checked.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=15823
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Tested-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Migrate from generic pep517 infrastructure to maturin infrastructure.
Verified license is still MIT after hash changed.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, when a package is downloaded from a custom location or
version, Buildroot excludes such a package from the mandatory integrity
check with hashes, because it was until now not possible to have such
hashes.
We now have a mechanism which users can leverage to provide additional
hashes, and so custom versions or locations can now be checked too.
Buildroot has no way to know that hashes have indeed been provided for
a custom location/version, and so will still happily ignore an
unchecked package.
However, users who do provide extra hashes most probably do expect that
no download is done without an integrity check, and thus expect that a
missing hash not be ignored.
Add an option that users can select to make Buildroot forcibly require
at least one valid hash, and no invalid hash, for all downloads.
Reported-by: "Martin Zeiser (mzeiser)" <mzeiser@cisco.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we expect and only use hash files that lie within the package
directory, alongside the .mk file. Those hash files are thus bundled
with Buildroot.
This implies that only what's known to Buildroot can ever get into those
hash files. For packages where the version is fixed (or a static
choice), then we can carry hashes for those known versions.
However, we do have a few packages for which the version is a free-form
entry, where the user can provide a custom location and/or version. like
a custom VCS tree and revision, or a custom tarball URL. This means that
Buildroot has no way to be able to cary hashes for such custom versions.
This means that there is no integrity check that what was downloaded is
what was expected. For a sha1 in a git tree, this is a minor issue,
because the sha1 by itself is already a hash of the expected content.
But for custom tarballs URLs, or for a tag in a VCS, there is indeed no
integrity check.
Buildroot can't provide such hashes, but interested users may want to
provide those, and currently there is no (easy) way to do so.
We leverage the existing global-patch-dir mechanism to look for extra
hash files. We use the same heuristic that is used for bundled hash
files, and for each global patch directory <dir>, we use the first file
to exist among:
1. look into <dir>/<package>/<version>/<package>.hash
2. look into <dir>/<package>/<package>.hash
Reported-by: "Martin Zeiser (mzeiser)" <mzeiser@cisco.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we expect and only use hash files that lie within the package
directory, alongside the .mk file. Those hash files are thus bundled
with Buildroot.
This implies that only what's known to Buildroot can ever get into those
hash files. For packages where the version is fixed (or a static
choice), then we can carry hashes for those known versions.
However, we do have a few packages for which the version is a free-form
entry, where the user can provide a custom location and/or version. like
a custom VCS tree and revision, or a custom tarball URL. This means that
Buildroot has no way to be able to cary hashes for such custom versions.
This means that there is no integrity check that what was downloaded is
what was expected. For a sha1 in a git tree, this is a minor issue,
because the sha1 by itself is already a hash of the expected content.
But for custom tarballs URLs, or for a tag in a VCS, there is indeed no
integrity check.
Buildroot can't provide such hashes, but interested users may want to
provide those, and currently there is no (easy) way to do so.
So, we need our download helpers to be able to accept more than one hash
file to lookup for hashes.
Extend the dl-wrapper and the check-hash helpers thusly, and update the
legal-info accordingly.
Note that, to be able to pass more than one hash file, we also need to
re-order the arguments passed to support/download/check-hash, which also
impies some shuffling in the three places it is called:
- 2 in dl-wrapper
- 1 in the legal-info infra
That in turn also requires that the legal-license-file macro args get
re-ordered to have the hash file last; we take the opportunity to also
move the HOST/TARGET arg to be first, like in the other legal-info
macros.
Reported-by: "Martin Zeiser (mzeiser)" <mzeiser@cisco.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop no longer required python-six runtime dependency.
Add new python-more-itertools runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Migrate from setuptools to flit build backend.
Remove python-setuptools runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 27bf08e4ad (configs/avenger96_defconfig: bump ATF version to 2.9
for binutils 2.39+ support) bumped TF-A, but it unfortunately does not boot
and instead dies with a panic:
NOTICE: CPU: STM32MP157AAC Rev.B
NOTICE: Model: Arrow Electronics STM32MP157A Avenger96 board
ERROR: nvmem node board_id not found
INFO: PMIC version = 0x10
ERROR: Product_below_2v5=1:
ERROR: HSLVEN update is destructive,
ERROR: no update as VDD > 2.7V
PANIC at PC : 0x2fff086f
Exception mode=0x00000016 at: 0x2fff086f
Instead use v2.5 to match the other stm32mp1 boards and use the same E=0
-Werror workaround. The avenger95 support is unfortunately broken since
v2.3 with the introduction of authentication support, so add a patch to the
DTS to fix that.
Notice that the authentication support was reworked in v2.7 so it is skipped
for the mp157a variant used on the avenger96, so the patch is not upstreamable.
While we're at it, also drop the debug option for consistency with the other
boards.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit f20589cbc7 (configs/stm32mp157c_odyssey: new defconfig) forgot to
specify a fixed TF-A version, so do that now.
When the defconfig was added, the default version was v2.5 - So use that.
Similarly to the other stm32mp1 defconfigs, this needs disabling -Werror
with E=0 to fix a build issue with GCC >= 12.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the move to default to GCC 12 in commit e0091e42ee (package/gcc:
switch to gcc 12.x as the default), TF-A now fails to build as a warning is
generated and it builds with -Werror:
CC plat/st/stm32mp1/bl2_plat_setup.c
drivers/st/io/io_stm32image.c: In function ‘stm32image_partition_read’:
drivers/st/io/io_stm32image.c:249:13: error: ‘result’ may be used uninitialized [-Werror=maybe-uninitialized]
249 | int result;
| ^~~~~~
cc1: all warnings being treated as errors
This is fixed in TF-A v2.6 with commit c1d732d0db24 (fix(io_stm32image):
uninitialized variable warning), but I do not have the board to verify if
v2.6 works, so instead disable -Werror by passsing E=0.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the move to default to GCC 12 in commit e0091e42ee (package/gcc:
switch to gcc 12.x as the default), TF-A now fails to build as a warning is
generated and it builds with -Werror:
CC plat/st/stm32mp1/bl2_plat_setup.c
drivers/st/io/io_stm32image.c: In function ‘stm32image_partition_read’:
drivers/st/io/io_stm32image.c:249:13: error: ‘result’ may be used uninitialized [-Werror=maybe-uninitialized]
249 | int result;
| ^~~~~~
cc1: all warnings being treated as errors
This is fixed in TF-A v2.6 with commit c1d732d0db24 (fix(io_stm32image):
uninitialized variable warning), but I do not have the board to verify if
v2.6 works, so instead disable -Werror by passsing E=0.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure raised since bump to version 3.2.3 in
commit 4155139365:
In file included from /home/thomas/autobuild/instance-1/output-1/host/include/python3.11/Python.h:38,
from src/modules/rlm_python3/rlm_python3.c:37:
/home/thomas/autobuild/instance-1/output-1/host/include/python3.11/pyport.h:596:2: error: #error "LONG_BIT definition appears wrong for platform (bad gcc/glibc config?)."
596 | #error "LONG_BIT definition appears wrong for platform (bad gcc/glibc config?)."
| ^~~~~
Fixes:
- http://autobuild.buildroot.org/results/36143ab06b66a047aa2247ea66b1df0d6c1cbd66
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update hash of license file:
Updated the Nmap Public Source License (NPSL) to Version 0.95. This just
clarifies that the derivative works definition and all other license
clauses only apply to parties who choose to accept the license in return
for the special rights granted (such as Nmap redistribution rights). If
a party can do everything they need to using copyright provisions
outside of this license such as fair use, we support that and aren't
trying to claim any control over their work. Versions of Nmap released
under previous versions of the NPSL may also be used under the NPSL 0.95
terms.
https://nmap.org/changelog#7.94
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
flashrom depends on libftdi1 since bump to version 1.3.0 in commit
073b0fc9c1:
Dependency libftdi1 found: no
[...]
/home/autobuild/autobuild/instance-7/output-1/host/lib/gcc/mips64el-buildroot-linux-gnu/12.3.0/../../../../mips64el-buildroot-linux-gnu/bin/ld: libflashrom.a(ft2232_spi.o): in function `send_buf':
ft2232_spi.c:(.text+0x20): undefined reference to `ftdi_write_data'
Fixes:
- http://autobuild.buildroot.org/results/11fae0933b38d82f15fec37e78298df232321bcd
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure on sh4 raised since bump to version
1.3.0 in commit
/home/thomas/autobuild/instance-3/output-1/per-package/flashrom/host/bin/../lib/gcc/sh4a-buildroot-linux-gnu/12.3.0/../../../../sh4a-buildroot-linux-gnu/bin/ld: libflashrom.a(internal.o): in function `internal_chip_readn':
internal.c:(.text+0x8): undefined reference to `mmio_readn'
Fixes:
- http://autobuild.buildroot.org/results/f74a9d315fb519f284428234713f43fcf4e35fd0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Badly introduced in
727c041a25 ("package/openjdk{-bin}: bump
versions to 17.0.9+9 and 21.0.1+12")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
License file hash changed because CRLF line endings were removed.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
- Move openjdk-bin.hash into separate directories, as the
legal/java.prefs/ASSEMBLY_EXCEPTION file has an upated URL for OpenJDK 21.
openjdk.java.net -> https://openjdk.org. The license type remains the same.
- Move 0001-Add-ARCv2-ISA-processors-support-to-Zero.patch into separate
directories as the list of architectures in src/hotspot/os/linux/os_linux.cpp
is no longer the same. 17 has LOONGARCH and 21 has LOONGARCH64.
Tested on Fedora39 and Debian 11 with:
./support/testing/run-tests tests.package.test_openjdk.TestOpenJdk.test_run
Tested-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following refpolicy build failure raised since commit
64ce823223:
policy/modules/system/xen.te:559:ERROR 'type udev_runtime_t is not within scope' at token ';' on line 628879:
allow xm_t udev_runtime_t:dir { open read getattr lock search ioctl add_name remove_name write };
[...]
policy/modules/system/udev.te:205:ERROR 'unknown type systemd_hwdb_t' at token ';' on line 582304:
allow udev_t systemd_hwdb_t:file map;
Fixes:
- http://autobuild.buildroot.org/results/849050b00a2ee5983c2324cb955cd533189a0460
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This test case runs firewalld using both system and sysvinit.
run `firewalld-cmd --state` and ensure the output is "running" with a return
code of 0.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
timeout = 35 * self.emulator.timeout_multiplier
[...]
self.assertRunOk(cmd, timeout=timeout)
Gets re-multiplied by self.emulator.timeout_multiplier in self.emulator.run().
Drop multiplying the timeout by self.emulator.timeout_multiplier to fix this
issue.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
to override the current value of 60 seconds
As per a suggestion by Thomas, add a timeout argument to override the current
value of 60 seconds for the emulator.login method.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
-Werror is unconditionally set since version 1.6.2 and
https://github.com/kravietz/pam_tacplus/commit/649e6f2efb2f3278c55d4c9704bb48cb9f74cb73
resulting in the following build failure since bump to version 1.7.0 in
commit 160f0e4b5f:
In file included from /home/thomas/autobuild/instance-0/output-1/host/mips-buildroot-linux-gnu/sysroot/usr/include/bits/libc-header-start.h:33,
from /home/thomas/autobuild/instance-0/output-1/host/mips-buildroot-linux-gnu/sysroot/usr/include/stdlib.h:26,
from ./lib/stdlib.h:36,
from ./libtac/include/libtac.h:35,
from support.h:25,
from support.c:28:
/home/thomas/autobuild/instance-0/output-1/host/mips-buildroot-linux-gnu/sysroot/usr/include/features.h:413:4: error: #warning _FORTIFY_SOURCE requires compiling with optimization (-O) [-Werror=cpp]
413 | # warning _FORTIFY_SOURCE requires compiling with optimization (-O)
| ^~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/9b5ece5d01eac8a760ed9ca331a902d1c47387a7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to 2023.10 and kernel to version 6.6.
There was a change in the location of the devicetrees for arm32
platforms, so adjust it accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit 89f5e98932 (support/download/svn: generate reproducible
svn archives), we've been able to generate reproducible archives, and
thus we have been able to verify the hashes for those archives.
However, the manual was not changed, and still falsely hinted that this
was not the cae.
Fix that.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream suggests to use it as a static library only, so follow that
principle.
Signed-off-by: Alessandro Partesotti <a.partesotti@gmail.com>
[Arnout:
- keep DEVELOPERS alphabetical;
- use oatpp for the prompt;
- add threads to the toolchain dependencies comment;
- move comment after the main prompt;
- rewrap the help text;
- empty line before upstream URL;
- hash comment Locally calulated instead of pointing to upstream
tarball URL;
- change hash to sha256;
- add hash for license file;
- reorder variables in .mk file;
- use _CONF_OPTS instead of invalid _CMAKE_OPTS.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Display the petitboot UI instead of a login prompt, allowing the
configuration of custom tty(s) as we do for the login prompt.
petitboot already depends on udev, so let's use it instead of rcS to
launch pb-console. This has the advantage of easily wildcarding the list
of ttys ("hvc*") and enables hotplug devices ("ttyUSB0").
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This is a better choice on platforms where it is available, so default
to it. Still select kexec for platforms where kexec-lite is not
available.
While we're at it, make use of the new
BR2_PACKAGE_KEXEC_LITE_ARCH_SUPPORTS symbol instead of relying of the
kexec-lite arch depends being a subject of kexec.
While we're at it, sort all run-time dependencies alphabetically and
don't repeat the comment.
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
[Arnout:
- use BR2_PACKAGE_KEXEC_LITE_ARCH_SUPPORTS;
- still allow full kexec by turning around the dependency;
- extend commit message.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This will make it easier to handle packages that want to select
kexec-lite.
It also fixes the current inconsistency in the comment: it was not
displayed for powerpc64le.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
All the petitboot components assume /var/log/petitboot by default;
pb-console can also put multiple logs there and pb-sos collects that
directory when creating a diagnostic tarball.
Defer to this default when launching pb-discover. If someone wants to
override, let's call the file /etc/default/petitboot which makes more
sense to be shared by all the components.
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
pb-discover does not create its own pid file. Handle the creation and
removal of the pid file in the init script.
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The comment should appear if threads aren't enabled, not when they are.
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The license file listed in the original commit adding the package in
a9ceaba794 did not exist.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
distutils is removed in Python 3.12.0. Switch to using sysconfig.get_path to
facilitate the migration.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Versioneer < 0.21 is incompatible with Python 3.12.0. Use the latest version
which is 0.29 as of this commit.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Versioneer < 0.21 is incompatible with Python 3.12.0. Use the latest version
which is 0.29 as of this commit.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Versioneer < 0.21 is incompatible with Python 3.12.0. Use the latest version
which is 0.29 as of this commit.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Versioneer < 0.21 is incompatible with Python 3.12.0. Use the latest version
which is 0.29 as of this commit.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This update is required to install the latest version of the GNOME desktop.
Currently, only gvfs depends on this package, and we have confirmed that
gvfs can be built.
Signed-off-by: Takumi Takahashi <takumiiinn@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In preperation of python 3.12.0, distutils has been removed completely.
Take an upstream commit that switches to sysconfig instead of distutils
to find the python module path.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[Arnout:
- apply to libftdi1, not libftdi;
- use the actual upstream commit instead of something homegrown;
- use a URL to the upstream commit instead of just the hash.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Fixes build error
Building dns library in /home/bernd/buildroot/br4/output/build/dhcp-4.4.3-
P1/bind/bind-9.11.36/lib/dns
./gen: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.38' not found
(required by ./gen)
make[4]: *** [Makefile:601: include/dns/enumtype.h] Error 1
make[3]: *** [Makefile:595: include] Error 2
with this defconfig
BR2_x86_64=y
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
BR2_PACKAGE_DHCP=y
Please note that this build error only occurs when the target and the
host system have the same arch. For example this defconfig builds fine:
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
BR2_PACKAGE_DHCP=y
on a Debian 12 x86_64 host using glibc-2.36:
$ /lib/ld-linux.so.2 --version
ld.so (Debian GLIBC 2.36-9+deb12u1) stable release version 2.36.
The error occurs since buildroot commit 34f8d874ee which bumped glibc
from 2.37 to 2.38.
This patch is inspired by the Yocto Project:
https://patchwork.yoctoproject.org/project/oe/patch/20230715212159.3265080-1-raj.khem@gmail.com/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since Docker v1.13.0 experimental only exists as a runtime flag. Drop
the config from buildroot as well.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Switch to using HTTPS for downloading libzlib from zlib.net.
(zlib.net doesn't default to HTTPS but does suggest HTTPS in the permalink
for the latest zlib release. Also works better with some corporate firewalls
that get suspicious about zlib for some reason.)
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Disable the AUFS snapshotter by default. AUFS support has been deprecated
since v1.5 and won't be available with containerd v2.0.
Add configuration option for the ZFS snapshotter and add the proper
runtime dependencies.
Add configuration option for Kubernetes CRI support. Note that CRI
support requires a writeable /etc or an appropriate containerd
configuration.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix CVE-2023-24805: cups-filters contains backends, filters, and other
software required to get the cups printing service working on operating
systems other than macos. If you use the Backend Error Handler (beh) to
create an accessible network printer, this security vulnerability can
cause remote code execution. `beh.c` contains the line `retval =
system(cmdline) >> 8;` which calls the `system` command with the operand
`cmdline`. `cmdline` contains multiple user controlled, unsanitized
values. As a result an attacker with network access to the hosted print
server can exploit this vulnerability to inject system commands which
are executed in the context of the running server. This issue has been
addressed in commit `8f2740357` and is expected to be bundled in the
next release. Users are advised to upgrade when possible and to restrict
access to network printers in the meantime.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In 6fa3a239 the gen-missing-cpe support script was removed together with
"make missing-cpe".
Remove the leftover path variable and drop it from "make clean".
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This should have been part of commit
9a51a07a91 ("configs/sipeed_licheepi_nano:
new board")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
"mschap" and "realm" are already part of default required
raddb modules(DEFAULT_MODULES in raddb/all.mk).
so removed them from disabled module list so that
radiusd.service can start without following errors:
- /etc/raddb/mods-enabled/mschap[11]: Failed to link to module 'rlm_mschap': /usr/lib/rlm_mschap.so
- /etc/raddb/mods-enabled/realm[21]: Failed to link to module 'rlm_realm': /usr/lib/rlm_realm.so
Signed-off-by: Kalpesh Panchal <kalpesh.panchal2@collins.com>
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
linux-pam is required to login via OpenSSH if the upstream refpolicy for
SELinux is enaabled, as linux-pam handles changing user contexts. If a
user wants to make their own policy and use a refpolicy via git, we of course
should let them do so. As such, only select linux-pam if the upstream version
of refpolicy is selected.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The ifrename tool is separate from iwconfig and is not being built. The
upstream does not have an install target for ifrename either, so we must
manually install it.
Signed-off-by: Neal J. Buchmeyer <neal.buchmeyer@collins.com>
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When dealing with enterprise-grade networks, it is more often than not
the case that the wider internet is unreachable but through proxies.
There is a usual set of variables that users can set in the
environment to point various tools (curl, git...) to use those
proxies.
Propagate those variables inside the container.
Note that there are a few tools (e.g. cvs, svn) that may not recognise
those variables; instead, they require custom setup that is too
complex to handle, so is left as an exercise to interested parties.
Similarly, there are other types of proxy, socks4 or socks5, that also
require custom setup that is not trivial to replicate in a container,
so is also left out as an exercise for interested parties.
In the large majority of cases, those few variables are enough to Make
Things Work™.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Ricardo Martincoski <ricardo.martincoski@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Our utils/docker-run wrapper is needed to provide a reproducible build
environment: tools, variables, etc... but is not meant for
isolation. As such, we do not care which network configuration is
used.
In some settings (e.g. enterprise networks), it is often the case that
a VPN is in use, especially in those wonderful times of widespread
remote work.
Letting Docker decide on the network setup will most usually lead to
it creating a private network that is NATed onto the principal network
interface, leading to non-functional network in the container when a
VPN is in use.
As such, always use the host network configuration, and do not let
Docker create a private network for the container.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Ricardo Martincoski <ricardo.martincoski@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The description of REFPOLICY_CUSTOM_GIT states:
The custom refpolicy must define the full policy explicitly,
and must be a fork of the original refpolicy, to have the
same build system. When this is selected, only the custom
policy definition are taken into account and all the modules
of the policy are built into the binary policy.
Currently, if a user definess their own policy, a package containing a selinux
directory would add to their custom policy, which is not what they would want.
Disable applying selinux policies in selinux/ directories for custom git
refpolicies.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The licensing terms are inherited from the target variant to the host
variant: when the host _LICENSE is empty, then the value of the target
_LICENSE is used.
However, for the golang infra, we want to append a little blurb about
vendored depndencies. If the package is a host-only, then it would
inherit the target _LICENSE, i.e. the variable without the leading
HOST_. If that is defined, this is inherited in the generic-package part
of the infra, but in the golang infra, we saw an empty variable, and so
we would not add the vendoring blurb.
We can't move the condition appending that blurb, after we called into
the generic-package infra, otherwise in that case, we'd have the
opposite issue for packages that are both target and host packages,
where the blurb would be duplicated for host packages...
Instead, we workaround the issue by duplicating the heuristic to inherit
the target value, from the generic- into the golang-package infra.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The golang infrastructure automatically expands the list of licenses
with a little blurb that the licenses for vendored dependencies might be
missing in the list.
However, when a package does not define a license, the resulting text is
sub-optimal, resulting in a manifest that contains (with a leading
comma, yes):
, vendored dependencies licenses probably not listed
In that case, pointing out some unkown licensing terms may be part of
unkonwn licensing terms is superfluous.
Instead, just let the legal infra do its job, and report an "unkown"
license altogether.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The licensing terms are inherited from the target variant to the host
variant: when the host _LICENSE is empty, then the value of the target
_LICENSE is used.
However, for the cargo infra, we want to append a little blurb about
vendored depndencies. If the package is a host-only, then it would
inherit the target _LICENSE, i.e. the variable without the leading
HOST_. If that is defined, this is inherited in the generic-package part
of the infra, but in the cargo infra, we saw an empty variable, and so
we would not add the vendoring blurb.
We can't move the condition appending that blurb, after we called into
the generic-package infra, otherwise in that case, we'd have the
opposite issue for packages that are both target and host packages,
where the blurb would be duplicated for host packages...
Instead, we workaround the issue by duplicating the heuristic to inherit
the target value, from the generic- into the cargo-package infra.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The cargo infrastructure automatically expands the list of licenses with
a little blurb that the licenses for vendored dependencies might be
missing in the list.
However, when a package does not define a license, the resulting text is
sub-optimal, resulting in a manifest that contains (with a leading
comma, yes):
, vendored dependencies licenses probably not listed
In that case, pointing out some unkown licensing terms may be part of
unkonwn licensing terms is superfluous.
Instead, just let the legal infra do its job, and report an "unkown"
license altogether.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Firewalld requires IPV6 to function. We also should enable the
other dependencies such as networking support to ensure all other
options in the giant list of kernel config options are selected
properly.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Refresh patch
Thu Aug 4 18:47:10 2022 Jutta Degener (jutta@pobox.com)
* Release 1.0 Patchlevel 22
Remove unused, and occasionally out of date, VERSION variable
from Makefile.
Sun Jul 31 16:17:59 2022 Jutta Degener (jutta@pobox.com)
* Release 1.0 Patchlevel 21
Use $(LN), not ln, in the Makefile rules for the installed binary
of untoast and tcat.
(Thanks to Carlo Cabrera for pointing that out!)
Mon Jul 4 10:34:18 2022
* Release 1.0 Patchlevel 20
Use $(RMFLAGS) with the rms in the Makefile; add -f to $(RMFLAGS) to
avoid spurious error messages during build.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
websocketpp had some ill-formed usage of template parameters which was
finally removed in C++20. Hence build fails when building with C++20
support enabled.
The patch is already in the develop branch but no new release was
done.
There are no autobuilder failures because websocketpp is a header-only
library, and there are no packages in Buildroot that depned on
websocketpp.
A build issue was encountered when bumping an internal project to
C++20. This issue triggered quite some bug reports in the project [0]
and there are backports to other package managers like vcpkg [1] and
conan [2].
[0] https://github.com/zaphoyd/websocketpp/pull/1060
[1] https://github.com/microsoft/vcpkg/pull/23669
[2] https://github.com/conan-io/conan-center-index/pull/15295
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
[Thomas: extend commit log with details provided by Michael.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Refactor 0001-add-qemu-wrapper-support.patch for 20.9.0
- NodeJS now requires GCC 10.1 header. However, as there is no
BR2_TOOLCHAIN_GCC_AT_LEAST_10_1, we round up to BR2_TOOLCHAIN_GCC_AT_LEAST_11.
- Drop the --without-dtrace and --without-etw config options as they no longer
exist.
- Update support/testing/tests/package/test_nodejs.py to use
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN, otherwise the test fails as the
gcc version selected will be 7.
- Update the hash file for LICENSE.txt due to numerous changes, such
as the addition of new libraries and updated dates. No new license
types are added.
Tested with: ./support/testing/run-tests tests.package.test_nodejs
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
NodeJS 20 requires gcc >= 10.1. Unfortunately, except for
BR2_HOST_GCC_AT_LEAST_4_9, Buildroot only handles host gcc version
with the granularity of the major release, so we will have to round up
to GCC >= 11 for NodeJS 20.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Fixed a regression in Django 4.2 that caused a crash of QuerySet.aggregate()
with aggregates referencing expressions containing subqueries (#34798).
- Restored, following a regression in Django 4.2, creating
varchar/text_pattern_ops indexes on CharField and TextField with
deterministic collations on PostgreSQL (#34932).
Tested on Fedora 39 with:
./support/testing/run-tests tests.package.test_python_django
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
apache uses pkgconfig to find dependencies such as lua, nhgttp2, openssl
and systemd.
For openssl, pkgconfig is used since version 2.1.1 and
https://github.com/apache/httpd/commit/0d4387dedc4ad83460bf52fc326c475c64133634
resulting in the following build failure since at least bump to version
2.4.54 in commit 78e5a9c40e:
ac_cv_path_PKGCONFIG=/usr/bin/pkg-config
[...]
configure:28669: checking for SSL_CTX_new
configure:28669: /home/buildroot/autobuild/instance-1/output-1/host/bin/armeb-buildroot-linux-uclibcgnueabi-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -L/home/buildroot/autobuild/instance-1/output-1/host/armeb-buildroot-linux-uclibcgnueabi/sysroot/usr/bin/../../../../armeb-buildroot-linux-uclibcgnueabi/sysroot/usr/lib -L/usr/lib conftest.c -lssl -lcrypto -lpthread >&5
armeb-buildroot-linux-uclibcgnueabi-gcc: ERROR: unsafe header/library path used in cross-compilation: '-L/usr/lib'
Fixes:
- http://autobuild.buildroot.org/results/d85c86ee1070582014c7b29b39f9a9f356988220
- http://autobuild.buildroot.org/results/55d6bad8572138e200730d3a9f2dd1b9048fd95d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
From https://docs.flutter.dev/perf/impeller:
Impeller provides a new rendering runtime for Flutter. The Flutter
team’s believes this solves Flutter’s early-onset jank issue. Impeller
precompiles a smaller, simpler set of shaders at Engine build time so
they don’t compile at runtime.
Impeller has the following objectives:
- Predictable performance: Impeller compiles all shaders reflection
and offline at build time. It builds all pipeline state objects
upfront. The engine controls caching and caches explicitly.
- Instrumentable: Impeller tags and labels all graphics resources
like textures, and buffers. It can capture and persist animations
to disk without affecting per-frame rendering performance.
- Portable: Flutter doesn’t tie Impeller to a specific client
rendering API. You can author shaders once and convert them to
backend-specific formats as necessary.
- Leverages modern graphics APIs: Impeller uses, but doesn’t depend
on, features available in modern APIs like Metal and Vulkan.
- Leverages concurrency: Impeller can distribute single-frame
workloads across multiple threads if necessary.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with gcc >= 13:
In file included from ../include/pistache/reactor.h:19,
from ../src/common/reactor.cc:13:
../include/pistache/flags.h:29:35: error: 'uint8_t' was not declared in this scope
29 | struct TypeStorage<sizeof(uint8_t)>
| ^~~~~~~
../include/pistache/flags.h:17:1: note: 'uint8_t' is defined in header '<cstdint>'; did you forget to '#include <cstdint>'?
16 | #include <iostream>
+++ |+#include <cstdint>
17 | #include <type_traits>
Fixes:
- http://autobuild.buildroot.org/results/d3b6eb6fb943d69571a311235944df879fccc831
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
TF-A prints a version string at boot which includes the version number as
specified in the Makefile and additional "build" information, specified by
the BUILD_STRING parameter:
https://trustedfirmware-a.readthedocs.io/en/v2.9/getting_started/build-options.html
BUILD_STRING: Input string for VERSION_STRING, which allows the TF-A build
to be uniquely identified. Defaults to the current git commit id.
This is implemented as:
# Default build string (git branch and commit)
ifeq (${BUILD_STRING},)
BUILD_STRING := $(shell git describe --always --dirty --tags 2> /dev/null)
endif
https://github.com/ARM-software/arm-trusted-firmware/blob/master/Makefile#L225-L228
Which is never correct in the context of Buildroot, as the TF-A build
directory is never a git repo, and git will move up the directory tree and
possibly and (possibly) pick up the git version of Buildroot instead.
To fix that, explicitly set BUILD_STRING to the version of the package.
Pass it before BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES so it
can still be overridden by the user if needed.
strings images/tf-a-* | egrep '^v2\.'
v2.9(debug):2023.08-859-g99d78b52a0
v2.9(debug):v2.9
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
tftpy is described as a pure Python implementation of the Trivial FTP
protocol. Add support for this package.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
After talking with Thomas Petazzoni, it is agreed that Amarulasolutions should
be added to the list of companies that can provide commercial support for
Buildroot.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
EditorConfig [0] is an editor-agnostic configuration file, to set
preferences on how to edit text: tabs vs. spaces, tab width, indentation
size, line endings...
A large number of editors support EditorConfig, either natively [1] or
with the help of plugins [2].
Add a basic .editorconfig that provides defaults for most of the files
used by Buildroot. More can be added in the future if we can find more
matching patterns.
The values are chosen a bit arbitrarily, unless we already have a
(un)written rule about it. Notably, indentation defaults to using 4
spaces, and only a set of files for which we require TABs (Makefile,
essentially) or have already settled for TABs (Kconfig files, init
scripts...) are configured so. The traditional width of TABs is 8 char,
and we pair TAB indentation with TAB size.
Trailing spaces are usually useless, except in asciidoc source where
they can be used to force a new line without a new paragraph.
One of the limitations of .editorconfig, though, is that it matches on
filenames (e.g. *.py), not on the content (e.g. no use of mimetype, or
libmagic, or such). Still, this is enough to cover a lot of files in
Buildroot.
[0] https://editorconfig.org/
[1] https://editorconfig.org/#pre-installed
[2] https://editorconfig.org/#download
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changes:
- Major upgrade, no API or ABI breaking changes (that we know of).
https://github.com/libnet/libnet/releases/tag/v1.3
Packaging:
- Verified builds on *all* test-pkg archs & toolchains
- Verified test-pkg also with ngrep, suricata, and mz
- Drop backported int64_t patch
- Disable doxygen (html docs) in build
- sha256sum of tarball now generated upstream
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Also, introduce a new test in support/testing/tests/init/test_openrc.py that
ensures split-user support works properly.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
OpenRC has not been updated for quite some time, and much has changed.
- Convert to a meson package.
- Update the license hash as the year has changed from 2015 to 2023.
- Introduce one new patch:
- 0007-allow-setting-rc_libexecdir-path.patch: Introduces the previous
behavior of setting the rc directory to /usr/libexec/rc.
(Upstream: Upstream: https://github.com/OpenRC/openrc/pull/443)
- Install the sysv-rcs script in the new OPENRC_INSTALL_SYSV_RCS_SCRIPT
post install hook as the OPENRC_BUILD_CMDS define no longer exists.
Tested with tests.init.test_openrc all tests pass.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is bugfix release of stable libmdbx branch, on the day of the 100th
anniversary of the birth of the outstanding Soviet and Russian scientist
and engineer Vladimir Fedorovich Utkin.
It is reasonable to backport this patch to all applicable releases/branches of Buildroot.
The most significant fixes of v0.12.8:
- Fixed regression of mdbx_put(MDBX_MULTIPLE) during batch/bulk
insertion of multi-values (aka "dupsort").
- Implemented overwriting in mdbx_put(MDBX_CURRENT) of all current
multi-key values in the absence of the flag MDBX_NOOVERWRITE.
- Added the ability to use mdbx_cursor_get(MDBX_GET_MULTIPLE) without
first setting the cursor, combining the batch data getting operation
with positioning the cursor.
- Micro-optimization and refactoring cursor_put_nochecklen().
- Clarifying the wording in the API description, including explanation
about SIGSEGV and not allowing direct data changes.
The complete ChangeLog: https://gitflic.ru/project/erthink/libmdbx/blob?file=ChangeLog.md
Signed-off-by: Леонид Юрьев (Leonid Yuriev) <leo@yuriev.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
OpenJDK 21 is out and with it, OpenJDK11 is now EOL.
See: https://endoflife.date/oracle-jdk As such, drop support for 11 and do the
following:
- The 0001-Add-ARCv2-ISA-processors-support-to-Zero.patch patch now applies to
both 17 and 21. Move it out of the version-specific directoriy.
- BR2_OPENJDK_VERSION_LTS is now set to 17.
- BR2_OPENJDK_VERSION_LATEST is now set to 21.
- Drop --disable-hotspot-gtest as it has been removed, and was ignored in 17.
- Add two separate HOST_OPENJDK_BIN_VERSION defines in openjdk-bin.mk as
there is not a point release yet for OpenJDK 21.
- Update the expectedVersion variable in JniTest.java from 0x000A0000 to
0x00150000
Tested with:
./support/testing/run-tests tests.package.test_openjdk.TestOpenJdk.test_run
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
conmon unconditionally uses seccomp_notif_sizes which is only available
since kernel 5.0 and
https://github.com/torvalds/linux/commit/6a21cc50f0c7f87dae5259f6cfefe024412313f6
resulting in the following build failure since the addition of the
package in commit 06f50ff1bf:
In file included from src/seccomp_notify.h:4,
from src/seccomp_notify.c:26:
src/seccomp_notify_plugin.h:33:78: warning: 'struct seccomp_notif_sizes' declared inside parameter list will not be visible outside of this definition or declaration
33 | typedef int (*run_oci_seccomp_notify_handle_request_cb)(void *opaque, struct seccomp_notif_sizes *sizes, struct seccomp_notif *sreq,
| ^~~~~~~~~~~~~~~~~~~
src/seccomp_notify.c:47:36: error: field 'sizes' has incomplete type
47 | struct seccomp_notif_sizes sizes;
| ^~~~~
Fixes:
- http://autobuild.buildroot.org/results/cbfa2f3a585b7feecd902137bc589a1ec15cbefe
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Checkpoint/Restore In Userspace (CRIU), is a software tool for the
Linux operating system to make it possible to freeze a running
application and checkpoint it to persistent storage as a collection of files.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
[yann.morin.1998@free.fr:
- BR2_ARM_CPU_ARMV8M does not exist
- BR2_BR2_powerpc64le misspelled
- move all arch dependencies to BR2_PACKAGE_CRIU_ARCH_SUPPORTS
- comment hidden with arch dependencies
- select host-python3, don't depend on it
- extend legal-info: LPLG-2.1 for lib/, MIT for images/
- PREFIX is also used at compile time for PLUGINDIR
- copy .proto file, rather than symlinking
- wrap long lines
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure with gcc >= 13:
In file included from /home/buildroot/autobuild/instance-1/output-1/build/reproc-14.2.4/reproc++/src/reproc.cpp:1:
/home/buildroot/autobuild/instance-1/output-1/build/reproc-14.2.4/reproc++/include/reproc++/reproc.hpp:95:5: error: declaration of 'reproc::options::<unnamed struct> reproc::options::env' changes meaning of 'env' [-Wchanges-meaning]
95 | } env = {};
| ^~~
/home/buildroot/autobuild/instance-1/output-1/build/reproc-14.2.4/reproc++/include/reproc++/reproc.hpp:91:5: note: used here to mean 'class reproc::env'
91 | env::type behavior;
| ^~~
Fixes:
- http://autobuild.buildroot.org/results/11feca3698154c255938ab3b25a34429135c31f8
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with gcc >= 13:
In file included from /home/thomas/autobuild/instance-1/output-1/build/snort3-3.1.40.0/src/packet_io/sfdaq_config.cc:25:
/home/thomas/autobuild/instance-1/output-1/build/snort3-3.1.40.0/src/packet_io/sfdaq_config.h:59:25: error: 'uint32_t' has not been declared
59 | void set_batch_size(uint32_t);
| ^~~~~~~~
/home/thomas/autobuild/instance-1/output-1/build/snort3-3.1.40.0/src/packet_io/sfdaq_config.h:62:5: error: 'uint32_t' does not name a type
62 | uint32_t get_batch_size() const { return (batch_size == BATCH_SIZE_UNSET) ? BATCH_SIZE_DEFAULT : batch_size; }
| ^~~~~~~~
/home/thomas/autobuild/instance-1/output-1/build/snort3-3.1.40.0/src/packet_io/sfdaq_config.h:26:1: note: 'uint32_t' is defined in header '<cstdint>'; did you forget to '#include <cstdint>'?
25 | #include <vector>
+++ |+#include <cstdint>
26 |
Fixes:
- http://autobuild.buildroot.org/results/c91a74bad542f32693f2e31412fba70446fd3959
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
1.72 Added examples/smi/smi.c showing how to use new SMI bus support,
courtesy Benoit Bouchez. Added support for disabling
documentation genetration with "./configure --with-docs=no",
courtesy of Christian Zuckschwerdt.
1.73 Fixed some inconsistent indenting in bcm2835.c that triggers
warnings for some people. Added Timeout checks to
bcm2835_i2c_write() in case of IO problems. New reason cade
BCM2835_I2C_REASON_ERROR_TIMEOUT added. Patch courtesy Simon
Peacock.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Build is failing with an unrecognised opcode error due to missing
`zicsr` extension requirement. This is introduced with GCC version 12.
When binutils was updated to v2.38 they updated to the default ISA spec
version 20191213. In this version the original i extension split into i,
Zicsr and Zifencei. A fix for this has been added since U-Boot version
2022.01 to detect new Zicsr and Zifencei extensions and enable it when needed
therefore, an updated U-Boot tag to our latest 2023.09 release will fix
this as in our latest release we have updated to U-Boot version 2023.07.
Update the kernel verion in line with the U-Boot release version to
ensure compatiblities and latest features and fixes are included.
Remove riscv_g selection as it is now selected by default.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
aespipe-v2.4g October 23 2023
- Added configure script autodetection for -fno-strict-aliasing compile
flag. This option is needed with some compilers that miscompile code
when link-time-optimization is used.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
nettle uses m4 during its build process. Without it, the build fails
with:
m4 ./m4-utils.m4 ./asm.m4 config.m4 machine.m4 aes-decrypt-internal.asm >aes-decrypt-internal.s
/bin/sh: 1: m4: not found
For the target package this is not visible, as the existing gmp
dependency pulls in host-m4. But technically speaking, nettle needs
host-m4 directly, so it makes sense to have this dependency.
For the host package, it clearly fails to build, but probably isn't
very visible as most systems have m4 installed system-wide: this was
noticed when building inside Buildroot's minimal Docker
container. There are no recorded autobuilder failures for this issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update Sway to version 1.8.1, which brings a new release series to
Buildroot and can be built with wlroots 0.16.x
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update Cage to version 0.1.5, which is a bug fix release that
supports using wlroots 0.16.x.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to version 0.16.2, which brings in support for a few new Wayland
protocols, and improved input device and scene graph APIs. Applications
which use wlroots might need to be adapted, and at least rebuilt. The
only packages in Buildroot which use wlroots at the moment are the Cage
and Sway compositors, to be updated in follow-up patches.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with gcc >= 13:
In file included from ./Common/log.h:45,
from LinuxPBA/LinuxPBA.cpp:25:
./Common/DtaOptions.h:33:5: error: 'uint8_t' does not name a type
33 | uint8_t password; /**< password supplied */
| ^~~~~~~
./Common/DtaOptions.h:1:1: note: 'uint8_t' is defined in header '<cstdint>'; did you forget to '#include <cstdint>'?
Fixes:
- http://autobuild.buildroot.org/results/b6feb4fb33d595414b61174deb9867e8c30cd186
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since Qemu 6.0.0, a warning appear in the log if a short-form boolean
option is used. This was fixed by Romain for the main cmdline description
(see 04afe86cd7 ("board/qemu/arm-vexpress-tz: use enable=on")) but was
not updated in the alternate cmdlines for when using a dual console or
a GDB debug setup.
By the way, fix description mentioning qemu-system-arm command line option
-S that is an uppercase S, not a lower case s.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bumps OP-TEE test package version to OP-TEE release 4.0.0.
Removes the local patch on OpenSSL support that has been integrated
into mainline repository before release tag 4.0.0.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Medium] A fix was added, but still under review for completeness, for a
Bleichenbacher style attack, leading to being able to decrypt a saved
TLS connection and potentially forge a signature after probing with a
large number of trial connections. This issue is around RSA decryption
and affects static RSA cipher suites on the server side, which are not
recommended to be used and are off by default. Static RSA cipher suites
were also removed from the TLS 1.3 protocol and only present in TLS 1.2
and lower. All padding versions of RSA decrypt are affected since the
code under review is outside of the padding processing. Information
about the private keys is NOT compromised in affected code. It's
recommended to disable static RSA cipher suites and update the version
of wolfSSL used if using RSA private decryption alone outside of TLS.
https://github.com/wolfSSL/wolfssl/releases/tag/v5.6.4-stable
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 72c653367d (board/licheepi_zero: move board files to their own
directory) forgot to rename the defconfig file, even though the
readme.txt was updated.
Do the rename now.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add support for the LicheePi Nano with mainline components:
- U-Boot 2023.04
- Linux 6.5.9
Board homepage and more usable WiKi:
- https://wiki.sipeed.com/hardware/en/lichee/Nano/Nano.html
- https://linux-sunxi.org/LicheePi_Nano
linux.fragment is required to disable some features in order to keep the
kernel size small, otherwise the board does not boot due to limited
memory. See note in readme.txt.
Signed-off-by: Francois Dugast <francois.dugast.foss@gmail.com>
[yann.morin.1998@free.fr:
- use fixed kernel version
- use manufacturer directory
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Group files for board licheepi_zero under the existing manufacturer
directory, like all the other boards by Sipeed.
Signed-off-by: Francois Dugast <francois.dugast.foss@gmail.com>
[yann.morin.1998@free.fr: use the manufacturer sub-dir]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure with gcc >= 13:
In function 'find_best_lang_match_cached',
inlined from 'find_best_lang_match_cached' at ../pango/pango-language.c:501:1,
inlined from 'pango_language_get_scripts' at ../pango/pango-language.c:661:21:
../pango/pango-language.c:518:12: error: array subscript 0 is outside array bounds of 'const void *[0]' {aka 'const void *[]'} [-Werror=array-bounds=]
518 | *cache = result;
| ~~~~~~~^~~~~~~~
In function 'pango_language_get_scripts':
cc1: note: source object is likely at address zero
cc1: some warnings being treated as errors
Fixes:
- http://autobuild.buildroot.org/results/e8b5a752a62621099942b29c1642747eef2930cb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
There is no need to define SDBUS_CPP_SOURCE explicitly because the
github helper works perfectly well with the default _SOURCE value.
Signed-off-by: Sergey Bobrenok <bobrofon@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
python-pycryptodomex uses C99 features like variable
declaration in for-loop statement, while old compilers
assumes C89 by default.
This patch explicitly specifies C99 standard.
Signed-off-by: Oleg Lyovin <ovlevin@salutedevices.com>
[yann.morin.1998@free.fr: use TARGET/HOST_CFLAGS]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
An issue was discovered in the C AMQP client library (aka rabbitmq-c)
through 0.13.0 for RabbitMQ. Credentials can only be entered on the
command line (e.g., for amqp-publish or amqp-consume) and are thus
visible to local attackers by listing a process and its arguments.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Drop --without-x (now unrecognized)
- Fix CVE-2023-40745: LibTIFF is vulnerable to an integer overflow. This
flaw allows remote attackers to cause a denial of service (application
crash) or possibly execute an arbitrary code via a crafted tiff image,
which triggers a heap-based buffer overflow.
- Fix CVE-2023-41175: A vulnerability was found in libtiff due to
multiple potential integer overflows in raw2tiff.c. This flaw allows
remote attackers to cause a denial of service or possibly execute an
arbitrary code via a crafted tiff image, which triggers a heap-based
buffer overflow.
https://libtiff.gitlab.io/libtiff/releases/v4.6.0.html
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure raised since the addition of the package
in commit 0a01085abe:
CMake Error at /home/buildroot/autobuild/instance-3/output-1/host/share/cmake-3.27/Modules/CMakeTestCXXCompiler.cmake:60 (message):
The C++ compiler
"/usr/bin/c++"
is not able to compile a simple test program.
Fixes:
- http://autobuild.buildroot.org/results/4b94edf6dee03e74ff53939aa228069cc6ba4292
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: propagate to spirv-tools]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
git.code.sf.net is available over HTTPS, so use that for security and
consistency with the other packages.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
git.code.sf.net is available over HTTPS, so use that for security and
consistency with the other packages.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now that we have HTTPS support for sources.buildroot.net (through Lets
encrypt / Cloudflare), it makes sense to default to it for our backup site.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The host-riscv64-elf-toolchain package was missing a hash file, add it now.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The host-mxsldr package was missing a hash file, add it now.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
MiniZip in zlib through 1.3 has an integer overflow and resultant
heap-based buffer overflow in zipOpenNewFileInZip4_64 via a long
filename, comment, or extra field. NOTE: MiniZip is not a supported part
of the zlib product.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 0b9efc991f ("linux: use BR2_MAKE") switched LINUX_MAKE to
$(BR2_MAKE) to avoid build issue with kernel version >= 6.2 and GNU
Make version < 3.82. However, the same issue is actual for kernel
modules as well.
Using $(BR2_MAKE) should guarantee a consistent behavior between
kernel and kernel-modules builds.
Signed-off-by: Alexey Romanov <avromanov@sberdevices.ru>
Signed-off-by: Sergey Bobrenok <SIBobrenok@sberdevices.ru>
[yann.morin.1998@free.fr: minor coding style]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Support for sha256 has no additional dependency, the size increase is
minimal, and sha256 is the smallest hash still not broken (md5 and sha1
are), so it makes sense to enable it unconditionally.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: make it unconditional and commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: drop option, use package as condition]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: drop option, use package as condition]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: drop option, use package as condition]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: drop option, use package as condition]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: drop option, use package as condition]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In commit d31db334c3 (opkg: Add gnupg signature checking support.),
the macro definition for the hook, and the hook assignment, got
separated by the then-newly introduced GPG handling.
Move the macro definition closer to the hook assignment. Since this is
a post-install hook, it is but logical that it comes further down in
the .mk file.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested in Fedora 39 and Debian 11 with:
./support/testing/run-tests tests.package.test_opkg.TestOpkg.test_run
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since the bump of tar to version 1.35 in Buildroot commit
d4d483451f ("package/tar: security bump
to version 1.35"), the build will fail on systems that are not Y2038,
such as uClibc configurations.
In order to preserve the previous behavior, pass --disable-year2038.
See the gnulib documentation for details [0]. Contrary to what the
option name might suggest, it doesn't really disable Y2038 support,
but only the check that the system is Y2038 compliant. So even with
--disable-year2038, if the system is Y2038 compliant (uses a 64-bit
arch, uses the musl C library, or uses the glibc C library with
BR2_TIME_BITS_64=y), tar will be Y2038 compliant.
[0] https://www.gnu.org/software/gnulib/manual/html_node/Avoiding-the-year-2038-problem.html
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Buildroot commit eb60820c0a disabled
elfutils for musl toolchains in 2015. Current code builds fine with musl
so remove the exceptions.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
[yann.morin.1998@free.fr:
- move all libc-related conditional blocks together
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
commit 21d52e52d8 (package/pkg-utils.mk: break hardlinks in global
{TARGET, HOST}_DIR on per-package build) was recently reverted, so we
are back to a situation where it is possible for packages and post-build
scripts to modify files in-place, and thus impact files in any arbitrary
per-package directory, which may break things on rebuild for example.
21d52e52d8 was too big a hammer, but we can still apply the reasoning
from it, to the aggregation of the final target and host directories.
This solves the case for post-build scripts at least. We leave the case
of inter-package modification aside, as it is a bigger issue that will
need more than just copying files around.
We use --hard-links, so that hard-links in the source (the PPD), are
kept as new hard-links (i.e. "copy" of hard-links) in the destination.
This contributes to limiting the size of target/.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Herve Codina <herve.codina@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Commit 21d52e52d8 (package/pkg-utils.mk: break hardlinks in global
{TARGET, HOST}_DIR on per-package build) stopped hardlink the source and
destination when rsyncing per-package directory, on the rationale that
modifying files in-place after the rsync would also modify the original
file, and that break foo-rebuild and can cause issues with post-build
scripts.
However, what 21d52e52d8 did not envision, is that copying instead of
hard-linking has two nasty side effects:
- the size increase for the build directory increase with the number
of packages and with the depth of th dependency chains for those
packages: a (relatively small) build that was previously totalling
~13GiB in output/, now totals north of 122GiB, an almost 10-time
increase;
- the build time increases, as it takes more time to read+write files
than it takes to create a new link to a file; the same build saw an
increase of build time from 5min 10s to 7min 30s, a 45% increase.
These regressions are both serious, so revert the change; we'll come up
with a stopgap measure in follow-up commits.
This reverts commit 21d52e52d8.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Herve Codina <herve.codina@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
This patch bumps the zynq_microzed_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30
- U-Boot v2023.01 with additional bug fixes
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynq_zed_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30
- U-Boot v2023.01 with additional bug fixes
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynq_zc706_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30
- U-Boot v2023.01 with additional bug fixes
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 0455f957a3 (package/network-manager: bump to version 1.44.2)
dropped the two patches but forgot to update .checkpackageignore.
Fix that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The last architecture-specific patch we had was removed 2015-02-14 with
commit 9863553fe8 (packages: all salute the passing of avr32), where
we eventually got rid of the avr32-specific patch for fbv.
Since then, we've only had common patches (that apply systematically),
or conditional patches, that are applied in an ad-hoc manner with
post-patch hooks. Currently, we even only have one such patch (for
Linux).
Since we do not advertise that possibility in the manual, and since we
do not want to have such patches, drop the support for it.
This has the potential for breaking existing br2-external trees, but
there is a workaround for those: they can provide a pre-patch ook that
copies the necessary per-arch patches if needed. We document this in the
manual.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Drop patches which are now upstream.
CONTRIBUTING.md hash changed due to text various text updates, most of
them outside of the section about licensing. The only change in that
section is:
@@ -39,26 +39,29 @@
new contributions already must already agree to that.
For more details see [RELICENSE.md](RELICENSE.md).
+Do not use "Signed-off-by:" lines in commits for NetworkManager. It has no meaning.
+
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Add 2 upstream patches, one to avoid build failure due to different libc
ioctl() prototype and one to avoid link conflict due to test unit enabled
by default.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Fix the following build failure with gcc >= 13:
In file included from ../src/compressor.c:3:
../src/compressor.h:59:59: error: unknown type name 'size_t'
59 | int compressor_input(CompressorContext *c, const void *p, size_t sz);
| ^~~~~~
../src/compressor.h:19:1: note: 'size_t' is defined in header '<stddef.h>'; did you forget to '#include <stddef.h>'?
18 | #include "cacompression.h"
+++ |+#include <stddef.h>
19 |
Fixes:
- http://autobuild.buildroot.org/results/ab08f3b90d253db45643dd058b80ae1dd5f49d0f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
CuteKeyboard is a Qt virtual keyboard plugin for embedded applications
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Acked-by: Andrea Ricchi <andrea.ricchi@amarulasolutions.com>
[Arnout:
- add DEVELOPERS entry;
- fixed the title in the .mk file;
- use select instead of depends on;
- with the above, add depends on QT5 and QT5_JSCORE.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The relocate-sdk.sh script does not work correctly when
BR2_PER_PACKAGE_DIRECTORIES is enabled. relocate-sdk.sh expects
everything to point at $HOST_DIR, but each package will be pointing at
its $(O)/per-package/*/host.
Use the same command for scrubing host paths during the build, to scrub
to the final host directory location.
Signed-off-by: Brandon Maier <Brandon.Maier@collins.com>
Acked-by: Charles Hardin <ckhardin@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Fixes the following CVEs :
- CVE-2023-4135 (https://gitlab.com/qemu-project/qemu/-/commit/ecb1b7b082d3b7dceff0e486a114502fc52c0fdf)
- CVE-2023-3354 (https://gitlab.com/qemu-project/qemu/-/commit/10be627d2b5ec2d6b3dce045144aa739eef678b4)
- CVE-2023-3180 (https://gitlab.com/qemu-project/qemu/-/commit/9d38a8434721a6479fe03fb5afb150ca793d3980)
The changes between 8.1.0 and 8.1.1 are only limited to bug fixes:
6bb4a8a47a (v8.1.1) Update version for 8.1.1 release
045fa84784 tpm: fix crash when FD >= 1024 and unnecessary errors due to EINTR
56270e5d3d meson: Fix targetos match for illumos and Solaris.
60da8301fe s390x/ap: fix missing subsystem reset registration
8b479229ff ui: fix crash when there are no active_console
d4919bbcc2 virtio-gpu/win32: set the destroy function on load
cae7dc1452 target/riscv: Allocate itrigger timers only once
7385e00665 target/riscv/pmp.c: respect mseccfg.RLB for pmpaddrX changes
1d4fb5815c target/riscv: fix satp_mode_finalize() when satp_mode.supported = 0
b822207513 hw/riscv: virt: Fix riscv,pmu DT node path
2947da750e linux-user/riscv: Use abi type for target_ucontext
60a7f5c8fe hw/intc: Make rtc variable names consistent
566dac7127 hw/intc: Fix upper/lower mtime write calculation
8ae20123b6 target/riscv: Fix zfa fleq.d and fltq.d
6c24b6000b target/riscv: Fix page_check_range use in fault-only-first
987e90cfd2 target/riscv/cpu.c: add zmmul isa string
b9f83298b9 hw/char/riscv_htif: Fix the console syscall on big endian hosts
3d6251f416 hw/char/riscv_htif: Fix printing of console characters on big endian hosts
9832a670b3 arm64: Restore trapless ptimer access
df33ce9b6d virtio: Drop out of coroutine context in virtio_load()
eeee989f72 qxl: don't assert() if device isn't yet initialized
93d4107937 hw/net/vmxnet3: Fix guest-triggerable assert()
6356785daa docs tests: Fix use of migrate_set_parameter
01bf87c8e3 qemu-options.hx: Rephrase the descriptions of the -hd* and -cdrom options
25ec23ab3f hw/i2c/aspeed: Fix TXBUF transmission start position error
9dc6f05cc8 hw/i2c/aspeed: Fix Tx count and Rx size error in buffer pool mode
d5361580ac hw/ide/ahci: fix broken SError handling
e8f5ca57e4 hw/ide/ahci: fix ahci_write_fis_sdb()
4448c345bc hw/ide/ahci: PxCI should not get cleared when ERR_STAT is set
4fbd5a5202 hw/ide/ahci: PxSACT and PxCI is cleared when PxCMD.ST is cleared
16cc9594d2 hw/ide/ahci: simplify and document PxCI handling
1efefd13ca hw/ide/ahci: write D2H FIS when processing NCQ command
c2e0495e3c hw/ide/core: set ERR_STAT in unsupported command completion
f64f1f8704 target/ppc: Fix LQ, STQ register-pair order for big-endian
9f54fef2c0 target/ppc: Flush inputs to zero with NJ in ppc_store_vscr
5358980d33 hw/ppc/e500: fix broken snapshot replay
6864f05cb1 ppc/vof: Fix missed fields in VOF cleanup
0175121c6c ui/dbus: Properly dispose touch/mouse dbus objects
e975434d62 target/i386: raise FERR interrupt with iothread locked
e5e77f256f linux-user: Adjust brk for load_bias
645b87f650 target/arm: properly document FEAT_CRC32
86d7b08d71 block-migration: Ensure we don't crash during migration cleanup
5691fbf440 softmmu: Assert data in bounds in iotlb_to_section
441106eebb docs/about/license: Update LICENSE URL
63188a00bb target/arm: Fix 64-bit SSRA
7012e20b2d target/arm: Fix SME ST1Q
c8e381d672 accel/kvm: Specify default IPA size for arm64
34808d041c kvm: Introduce kvm_arch_get_default_type hook
01f6417f15 include/hw/virtio/virtio-gpu: Fix virtio-gpu with blob on big endian hosts
14a8213b75 target/s390x: Check reserved bits of VFMIN/VFMAX's M5
c12eddbd48 target/s390x: Fix VSTL with a large length
880e82ed78 target/s390x: Use a 16-bit immediate in VREP
5980189e96 target/s390x: Fix the "ignored match" case in VSTRS
Signed-off-by: Clement Ramirez <ramirez.clement3@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This fixes a typo by dropping off the spurious x in ensure.
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 0c82f3f635 (package/gcc: remove powerpc conditional patching
logic), the macro defining the conditional patch was removed, but it was
still referenced and expanded in the apply-patches hook.
Drop that now.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2023-39325: rapid stream resets can cause excessive work
A malicious HTTP/2 client which rapidly creates requests and immediately
resets them can cause excessive server resource consumption. While the
total number of requests is bounded to the http2.Server.MaxConcurrentStreams
setting, resetting an in-progress request allows the attacker to create a
new request while the existing one is still executing.
go1.21.3 (released 2023-10-10) includes a security fix to the net/http
package.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The gpt-auto-generator can generate the boot.mount unit, which reports
an error if this directory can't be created (if / is read-only). There
is no reason not to create this directory, even if the platform doesn't
actually have a boot partition that can be mounted there.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
journald will always have a runtime log in /run/systemd/journal,
and a persistent one in /var/log/journal under certain conditions.
By default it will check for the existence of that directory.
When /var is not backed by mass-storage you typically don't want your
log duplicated and journald should be tuned to account for
having only RAM available.
With this commit, the directory will no longer be created automatically,
but instead it's created only if the root filesystem is writeable.
It is rather easy for users to opt-in by either creating that directory
(e.g. with a tmpfiles fragment) or editing /etc/systemd/journald.conf.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The mode should reflect the mount directory,
and 755 is the default - so drop the mount option.
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Arnout:
- use a simple mount unit for
TestInitSystemSystemdRoFullOverlayfsVarBacking;
- change the test of TestInitSystemSystemdRoFullOverlayfsVarBacking to
check that the exact expected mount was performed;
- add a test of var backing with fstab instead of mount unit.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Systemd requires /var to be writeable [1]. With read-only rootfs, we
need a solution that makes sure /var is writeable. We already have a
solution using a factory, with systemd-tmpfiles. This approach has a few
limitations:
- The behaviour of what happens when the rootfs is updated and the
contents of the factory /var changes are not very intuitive.
- systemd-tmpfiles is not started super early in the boot, so there's a
relatively long time that /var is not writeable. There is also no easy
way in systemd to express dependencies on the subdirectories of /var
to have been populated from the factory.
- The contents of /var is duplicated. If it is big, the rootfs size
increases unnecessarily and it takes a long time before the copying is
done. This is also not done atomically.
This commit adds an alternative using an overlay filesystem that has the
following characteristics:
- Don't depend on anything being available, except the
API File Systems [2]. In other words, this can be done very early in
the boot process. This is useful because /var is meant to be
available before normal and even some early services are running.
- Be a clean drop-in, that can be trivially added / removed.
- Make sure that overlayfs is available in the kernel.
- Units are (partially) reusable for custom solutions. This goal is
actually not fully reached yet: for that the service file should be
converted into a template, and the mount unit should use a specifier
for all repeated references to /var.
Mounting the overlay is slightly acrobatic and requires a few steps:
- First, we have to make sure the directories for overlayfs's upper,
lower and work directories are available on a tmpfs. Note that
"upper" and "work" must be on the same filesystem.
- The writeable overlay upper directory must be mounted.
- The original contents of /var must be bind-mounted to the overlay
lower directory.
- Finally, the overlay must be mounted on /var.
For the overlayfs directories, we create a tree on /run. Since there is
no standard name convention for this, we create a new directory
"/run/buildroot" with subdirectory "mounts" for everything
mount-related. Below that, a subdirectory is created for every mount
point that needs helper directories. Thus, we arrive to
/run/buildroot/mounts/var as the base directory for the overlay. Below
this, the directories lower, upper and work are created.
The bind-mount of /var is done in the same service as the one creating
the overlay lower, upper and work directories. Creating those
directories can't be done in a mount unit, and bind-mounting /var in a
mount unit would create a circular dependency. Indeed, if we had a mount
unit to do the bind mount, then it sould look like:
# run-buildroot-mounts-var-lower.mount
[Mount]
What=/var
Where=/run/buildroot/mounts/var/lower
Options=bind
and then the var.mount unit would need to have a dependency on that
unit:
# var.mount
[Unit]
After=run-buildroot-mounts-var-lower.mount
[Mount]
Where=/var
However, the What=/var of the first unit automatically adds an implicit
dependency on /var, and since there is a unit providing Where=/var, we
would have run-buildroot-mounts-var-lower.mount depend on var.mount, but
we need var.mount to depend on run-buildroot-mounts-var-lower.mount, so
this is a circular dependency. There is no way to tell systemd no to add
the implicit dependency. So we do the bind mont manually in the service
unit that prepares the overlay structure.
For the writeable upper layer, we don't need to do anything. In the
default configuration, the upper layer is supposed to be a tmpfs, and
/run/buildroot/mounts/var/upper is already a tmpfs so it can serve as
is. To make it persistent, we suggest to the user to mount a writeable,
persistent filesystem on /run/buildroot/mounts/var. The
RequiresMountsFor dependency in the prepare-var-overlay service makes
sure that that mount is performed before the overlay is started. Using
/run/buildroot/mounts/var/upper as the mount point sounds more logical
at first, but since the work directory is supposed to be on the same
filesystem as the upper directory, this wouldn't work very well.
As example, consider using /dev/sdc1 as upper layer for var, this can be
achieved by adding the following line to fstab:
/dev/sdc1 /run/buildroot/mounts/var ext4 defaults
Systemd will convert this into a mount unit with all the proper
dependencies.
Norbert provided some systemd units as a starting point, and that was
quite a huge help in understanding how to fit all those things together.
[1] - https://www.freedesktop.org/wiki/Software/systemd/APIFileSystems/
Co-authored-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Norbert Lange <nolange79@gmail.com>
Cc: Romain Naour <romain.naour@smile.fr>
Cc: Jérémy Rosen <jeremy.rosen@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Arnout:
- Merge commit messages from Yann and from Norbert.
- Remove the run-buildroot-mounts-var.mount unit; instead, just reuse
the existing tmpfs for the upper layer in the default case.
- Update the help text to explain how to mount a custom upper layer
with fstab.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Currently, we have a single solution to handle the /var content on a
read-only root filesystem, and users can opt out of using it.
We're going to introduce another solution (based on an overlayfs), which
is incompatible with using the factory, so we'll have a choice of three
mutually exclusive options.
Introduce that choice now with just the existing /var factory, and a new
option to opt out of it.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Norbert Lange <nolange79@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Romain Naour <romain.naour@smile.fr>
Cc : Jérémy Rosen <jeremy.rosen@smile.fr>
Acked-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Fixes CVE-2023-39323: Line directives ("//line") can be used to bypass the
restrictions on "//go:cgo_" directives, allowing blocked linker and compiler
flags to be passed during compilation. This can result in unexpected
execution of arbitrary code when running "go build".
go1.21.2 (released 2023-10-05) includes one security fixes to the cmd/go
package, as well as bug fixes to the compiler, the go command, the linker,
the runtime, and the runtime/metrics package.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit b574a9606e (package/erlang: do not hard-code the Erlang
Interface Version (EI_VSN)) removed the need to care about keeping
the erlang version and its API version in sync, as the latter is
automatically extracted from installed files. The corresponding comment
was removed in that commit:
# Whenever updating Erlang, this value should be updated as well, to the
# value of EI_VSN in the file lib/erl_interface/vsn.mk
However, the removal of the comment above the package version was
leftover (probably because of a conflict with a version bump that was
improperly resolved).
Drop the comment now.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 4cbc2af604 moved the nodejs patches
to the nodejs-src directory, but forgot to update .checkpackageignore
accordingly. Fix that, by running `make .checkpackageignore`.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The TestNodeJSModule test triggers the build of host-nodejs to be able
to install third party modules. Now that host-nodejs has two
providers, it makes sense to test both cases, so we duplicate
TestNodeJSModule into TestNodeJsModuleHostBin (which tests the
host-nodejs-bin) and TestNodeJSModuleHostSrc (which tests the
host-nodejs-src).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This package downloads the pre-built version of nodejs, if the host
platform supports it.
Reuse the variables defined in nodejs.mk.
For the definition of BR2_PACKAGE_PROVIDES_HOST_NODEJS, take care of
defaulting to host-nodejs-bin if host-nodejs is not selected at all.
This makes sure that in the future we will be able to run 'make
foo-source' for a package that uses nodejs vendoring, and it will use
the prebuilt nodejs to perform the vendoring.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Arnout:
- update to 16.20.0 to match nodejs.mk - including hashes;
- add HOST_NODEJS_BIN_ACTUAL_SOURCE_TARBALL + hash;
- move to package/nodejs/nodejs-bin;
- drop DEVELOPERS change, it's already covered by package/nodejs;
- re-order the series;
- immediately add it as a virtual package provider;
- add prompt and helpt text to choice;
- select host-nodejs-bin as provider if host-nodejs is not selected at
all.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
host-nodejs is quite long to build (5 minutes on a very fast build
machine), and will become a download dependency when we implement
vendoring for NodeJS-based packages.
In order to mitigate this build time, an idea is to use a pre-compiled
host NodeJS. One option would be to use a pre-installed NodeJS, but
we're concerned by version compatibility issues of the host NodeJS/NPM
does not have the same version as the target NodeJS/NPM. So another
option is to use a pre-compiled NodeJS provided by the NodeJS project
itself.
To achieve this, this commit turns the host-nodejs package into a
virtual package. For the time being, this has just one provider:
host-nodejs-src, which builds host-nodejs from source. This is the
original host-nodejs package, renamed to host-nodejs-src.
The target nodejs package is also renamed to nodejs-src in order to have
a single package nodejs-src that has a host and target version, as
usual. We do keep the nodejs target package itself, but it's an empty
package - not even a virtual package. This means the following.
- Its VERSION, SOURCE and SITE variables are left empty. The existing
variables are renamed to NODEJS_COMMON_VERSION etc. to allow them to
be reused by nodejs-src and the future nodejs-bin.
- It's a generic package with a single dependency, nodejs-src.
- The Config.in remains unchanged, except that it selects
BR2_PACKAGE_NODEJS_SRC.
- BR2_PACKAGE_NODEJS_SRC is a blind option.
Co-authored-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Later we will change host-nodejs into a virtual package with the option
to download the binary, or to build from source. Those two
implementations will share version etc., so we want them in a
subdirectory in order to guarantee order of inclusion.
As a preparatory step, move the existing, single nodejs implementation
down into a subdirectory.
The definitions in nodejs.mk that will later be shared between the
source and binary variants of the package stay in
package/nodejs/nodejs.mk; the rest moves down to
package/nodejs/nodejs/nodejs.mk.
The hash file will be shared between the implementations and therefore
stays in package/nodejs/nodejs.hash. package/nodejs/nodejs/nodejs.hash
is a symlink to it.
The Config.in and Config.in.host don't move. The two implementations
will only have blind options.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Bumb rwmem to the latest version. The main reason to bumb is to get a
fix for a compilation issue present when compiling with gcc-13 (need to
include <cstdint>).
As the project has moved to C++20, we need to adjust the Config.in
accordingly.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following security issues:
CVE-2023-4527: If the system is configured in no-aaaa mode via
/etc/resolv.conf, getaddrinfo is called for the AF_UNSPEC address
family, and a DNS response is received over TCP that is larger than
2048 bytes, getaddrinfo may potentially disclose stack contents via
the returned address data, or crash.
CVE-2023-4806: When an NSS plugin only implements the
_gethostbyname2_r and _getcanonname_r callbacks, getaddrinfo could use
memory that was freed during buffer resizing, potentially causing a
crash or read or write to arbitrary memory.
CVE-2023-5156: The fix for CVE-2023-4806 introduced a memory leak when
an application calls getaddrinfo for AF_INET6 with AI_CANONNAME,
AI_ALL and AI_V4MAPPED flags set.
CVE-2023-4911: If a tunable of the form NAME=NAME=VAL is passed in the
environment of a setuid program and NAME is valid, it may result in a
buffer overflow, which could be exploited to achieve escalated
privileges. This flaw was introduced in glibc 2.34.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Removed patch which was backported from upstream and is now included
in this release.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
[Peter: drop CVE ignore for patch]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/5676609b6331b645f2e557aca67afe4c3a087433/
Fix a build failure for --without-gd builds since the bump to 5.4.9 with
commit 6dc3d3c360 (package/gnuplot: bump version to 5.4.9):
In file included from term.h:298,
from term.c:1211:
../term/post.trm:4016:11: error: expected declaration specifiers or '...' before string constant
4016 | fputs("%%%%BeginImage\n", gppsfile);
Add a patch fixing that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CVE-2022-44792 handle_ipDefaultTTL in agent/mibgroup/ip-mib/ip_scalars.c
in Net-SNMP 5.8 through 5.9.3 has a NULL Pointer Exception bug that can
be used by a remote attacker (who has write access) to cause the
instance to crash via a crafted UDP packet, resulting in Denial of
Service.
CVE-2022-44793 handle_ipv6IpForwarding in
agent/mibgroup/ip-mib/ip_scalars.c in Net-SNMP 5.4.3 through 5.9.3 has a
NULL Pointer Exception bug that can be used by a remote attacker to
cause the instance to crash via a crafted UDP packet, resulting in
Denial of Service.
The pgp key was changed [0] as the old one expired [1].
[0]: https://sourceforge.net/p/net-snmp/htdocs/ci/90a6d98aae21fcdff06b5be139eb4d44ae96a9de/
[1]: https://github.com/net-snmp/net-snmp/issues/595
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Due to a change in util-linux (commit
10f5f79485964ab52272ebe79c3b0047b1f84d82, "libbuid: use
_UL_LIBUUID_UUID_H to cover uuid.h"), gptfdisk no longer detects the
availability of libuuid to generate UUIDs, causing the following
message at runtime:
Warning! Unable to generate a proper UUID! Creating an improper one as a last
resort! Windows 7 may crash if you save this partition table!
This issue exists since util-linux was bumped to version 2.38 in
Buildroot
ee978e853a ("package/util-linux: bump
version to 2.38").
This issue has been fixed in upstream gptfdisk, but the fix [0] is not
yet in a new stable release, so we backport it.
Additionally, now that gptfdisk uses libuuid again, the build fails
because passing LDLIBS to make overrides the default value in the
Makefile. To fix this, this patch adds -luuid to GPTFDISK_LDLIBS.
[0] https://sourceforge.net/p/gptfdisk/code/ci/6a8416cbd12d55f882bb751993b94f72d338d96f
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 369ff9a88f (package/libmodplug: update to git version)
improperly used a short hash as version, so switch to the full-length
hash.
Github use the full-length hash when it creates the top-level directory
of the generated archive, so the hash of the archive does not in fact
change, only its filename. This is perfectly fine fine our handling of
s.b.o.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
libmodplug calls `cctype` functions, such as `isspace`,
with negative values. This is undefined behaviour.
While glibc allows it, it crashes on uClibc compiled
without `UCLIBC_HAS_CTYPE_SIGNED`.
Adds a patch that resolves the issue.
Also sent upstream. However, the library author has not merged
any pull request for about a year.
Signed-off-by: Gleb Mazovetskiy <glex.spb@gmail.com>
[yann.morin.1998@free.fr:
- add Gleb's SoB to the patch
- add upstream URL to the patch
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Y2038 is now almost only 15 years away, and embedded systems built
today are potentially going to still be operational in 15 years, and
even though they are supposed to receive updates by then, we all know
how things go, and potentially some of these embedded systems will not
receive any update.
In 2038, the signed 32-bit representation of time_t used on 32-bit
architectures will overflow, causing all time-related functions to go
back in time in a surprising way.
The Linux kernel has already been modified to support a 64-bit
representation of time_t on 32-bit architectures, but from a C library
perspective, the situation varies:
- glibc uses this 64-bit time_t representation on 32-bit systems
since glibc 2.34, but only if -D_TIME_BITS=64 is
specified. Therefore, this commit adds an option to add this flag
globally to the build, when glibc is the C library and the
architecture is not 64-bit.
- musl uses unconditionally a 64-bit time_t representation on 32-bit
systems since musl 1.2.0. So there is nothing to do here since
Buildroot has been using a musl >= 1.2.0, used since Buildroot
2020.05. No Buildroot option is needed here.
- uClibc-ng does not support a 64-bit time_t representation on 32-bit
systems, so systems using uClibc-ng will not be Y2038 compliant, at
least for now. No Buildroot option is needed here.
It should be noted that being Y2038-compliant will only work if all
application/library code is correct. For example if an
application/library stores a timestamp in an "int" instead of using
the proper time_t type, then the mechanisms described above will not
fix this, and the application/library will continue to be broken in
terms of Y2038 support.
Possible discussions points about this patch:
- Should we have an option at all, or should we unconditionally pass
-D_TIME_BITS=64, like we have been doing for _FILE_OFFSET_BITS=64
for quite some time. The reasoning for having an option is that
the mechanism is itself opt-in in glibc, and generally relatively
new, so it seemed logical for now to make it optional as well in
Buildroot.
- Should we show something (a Config.in comment?) in the musl and
uClibc-ng case to let the user know that the code is Y2038
compliant (musl) or not Y2038 compliant (uClibc-ng). Or should this
discussion be part of the Buildroot documentation?
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a bugfix release which fixes a CVE.
See:
https://www.enlightenment.org/news/2022-09-15-enlightenment-0.25.4
CVE-2022-37706 "enlightenment_sys in Enlightenment before 0.25.4 allows
local users to gain privileges because it is setuid root, and the system
library function mishandles pathnames that begin with a /dev/..
substring."
Hashes were never part of the online news page, therefore mark them as
locally computed.
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We recently discovered that host-spirv-llvm-translator downloads the
SPIR-V headers during its build process, which is bad. Now that we
have a host variant of spirv-headers, we use it to avoid the
"downloading during the build".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We discovered that the existing host-spirv-llvm-translator package
downloads the spirv-headers during its build process, which of course
is very wrong. In order to fix this, we first introduce a host variant
of the spirv-headers.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
host-rust-bindgen will be required to build several different rust-based
packages, including a Linux kernel with rust modules and mesa3d's
rusticl which is the rust-based implementation of OpenCL.
The Cargo.toml file at the project root is a "virtual manifest". Since
we only want to install rust-bindgen, we can specify RUST_BINDGEN_SUBDIR
= bindgen-cli to use the Cargo.toml from this directory.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Make 4.4 introduces a shuffle mode which randomizes prerequisites
in order to better flush out issues with parallel builds. On the other
hand, we use MAKE1 to build packages that are known to be broken with
parallel build. For these, passing the shuffle option would be
counter-productive and lead to spurious build failures.
The --shuffle=none option exists to turn off shuffling again. We can't
add this option unconditionally, however, because Make < 4.4 doesn't
know it. Therefore, conditionally pass --shuffle=none only if there is a
shuffle option in MAKEFLAGS.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The reinstall, rebuild and reconfigure commands rely on the
left-to-right order of evaluation of the dependencies to make sure that
the stamp files are removed before attempting to rebuild. However, this
order of evaluation is not guaranteed. In particular, if top-level
parallel build is enabled, they are executed in parallel and the stamp
file may not have been removed yet when it is evaluated to decide if
rebuild has to be done.
Since make 4.4, it is possible to reproduce this issue by passing
`--shuffle=reverse` to the make commandline.
To solve this, add a .WAIT directive between the clean and
install/build/configure dependencies. .WAIT was introduced in make 4.4
as well. It makes sure that the dependencies on the left are evaluated
before the dependencies on the right - exactly what we want here.
Earlier versions of make don't know about .WAIT, so we need to add a
.PHONY dependency to effectively ignore it.
Note that this doesn't fix the problem for make versions earlier than
4.4. However, the issue isn't really that important: reinstall, rebuild
and reconfigure are development tools, they're not fully reliable to
begin with, and it's anyway less likely that someone uses `make -j` when
doing a reinstall/rebuild/reconfigure.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Reported-by: James Hilliard <james.hilliard1@gmail.com>
- Fix CVE-2022-48303: GNU Tar through 1.34 has a one-byte out-of-bounds
read that results in use of uninitialized memory for a conditional
jump. Exploitation to change the flow of control has not been
demonstrated. The issue occurs in from_header in list.c via a V7
archive in which mtime has approximately 11 whitespace characters.
- Update hash of COPYING (http replaced by https)
https://lists.gnu.org/archive/html/info-gnu/2023-07/msg00005.html
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When building for a target architecture that go does not support, the
installation fails with:
$ make host-go
[...]
ln -sf ../lib/go/bin/go /home/nyma7486/dev/work/5GCroCo/O/pouet/per-package/host-go/host/bin/
ln: failed to create symbolic link '/home/nyma7486/dev/work/5GCroCo/O/pouet/per-package/host-go/host/bin/': No such file or directory
Indeed, the HOST_DIR/bin is not guaranteed to exist when we install a
host package, so it needs to be explicitly created before we can create
entries in there.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Christian Stewart <christian@aperture.us>
Cc: Anisse Astier <anisse@astier.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Without this patch, a make <pkg>_rebuild detects overwrites. Indeed, in
target_finalize steps some modifications are done on installed files (ie
strip or TARGET_FINALIZE_HOOKS for instance).
In order to avoid these modifications seen from per-package {TARGET,HOST}_DIR
and so been analyzed as some overwrites, global {TARGET,HOST}_DIR is built
using a full copy of the involved per-package files instead of hardlinks.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit fixes the S10hyperv SysV init script which expects binaries
to be locate in /sbin while they are installed in /usr/sbin. Please
note, that the systemd init scripts correctly reference them.
Furthermore, the SysV init script did not check for an actual HyperV
environment to be present, which is also corrected. In addition, this
commit also fixes check-package warnings regarding a missing DAEMON
definition.
Signed-off-by: Jens Maus <mail@jens-maus.de>
[Peter: drop from .checkpackageignore]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The toolchain wrapper automatically adds Position Independent
Execution and stack protector flags in the build process when selected
in the configuration. at91bootstrap being freestanding code, it
doesn't support these, so we have to disable them.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The "official" repository we used to reference disapeared quite some
time ago, so in commit 8c25838b53 (package/rockchip-mali: fix build
failure due to missing URL) we switched to using a mirror.
The tarballs generated on the Github side have a top-level directory
that is named "repo-name-HASH", so when we switched to a repository
named "libmali" to one named "mirrors", the content of the generated
tarball changed, even though the content of the files did not.
We can't just change the hash to the new value, or that would conflict
with thecopy on s.b.o and older versions of Buildroot.
So, we drop one cahr from the commit hash, which eans the tarball name
changes, and thus we can calculate a new hash for that tarball, and
there will be no conflict with any existing tarball on s.b.o.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NVIDIA driver persistence daemon.
Signed-off-by: Raphael Pavlidis <raphael.pavlidis@gmail.com>
[Arnout:
- disable on BR2_STATIC_LIBS;
- only depend on tirpc if toolchain doesn't have RPC;
- use unstripped binary - the strip support in the makefile is utterly
broken (and we anyway strip in target-finalize);
- define NVIDIA_PERSISTENCED_USERS directly rather than with another
variable;
- install all the systemd stuff in
NVIDIA_PERSISTENCED_INSTALL_INIT_SYSTEMD.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
udisks now requires that libblockdev has support for NVME via
libnvme, while udisks itself is not linked against libnvme,
just against libblockdev-nvme.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr: fix+extend commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add defconfig for the Khadas VIM3 board which uses a A311D SoC with a 4x
ARM Cortex-A73 + 2x ARM Cortex-A53 big.LITTLE architecture.
This defconfig includes the Linux mainline kernel version 6.3 as well as
mainline uboot version 2023.04 with an in-tree .dts and uboot-defconfig.
It also includes the host-tool amlogic-boot-fip which is necessary for
signing the bootloader. This host tool is used in the post-image.sh script
in order to generate the signed binary.
This binary is then flashed to the final sdcard.img after it is
generated using genimage. It is done in this way because the bootloader
image needs to be flashed in 2 steps. First the first 444 bytes need to
be flashed to the beginning of the sdcard.img, then we need to skip 68 bytes
in the source and the destination and then write the remaining
bootloader image to the sdcard.img.
Ref: http://docs.khadas.com/products/sbc/vim3/development/create-bootable-tf-card
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
[Romain:
add BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_3=y
add BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
add BR2_PACKAGE_HOST_DOSFSTOOLS=y for genimage vfat support
]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
This tool is needed by some SoCs to sign the bootloader.
See the list of supported SoCs:
https://github.com/LibreELEC/amlogic-boot-fip
The variable BR2_PACKAGE_HOST_AMLOGIC_BOOT_FIP_DEVICE is used to specify
for which device this package needs to be used.
This tool uses pre-compiled binaries in order to sign the bootloader.
These binaries are provided under a proprietary license that prohibits
any redistribution of the resulting images.
A similar tool was tried to be added in the past:
http://patchwork.ozlabs.org/project/buildroot/patch/1533545408-11248-2-git-send-email-narmstrong@baylibre.com/
This time however a license file is present which can be used by
make legal-info. Additionally, acs_tool.pyc was replaced by acs_tool.py
and is therefore not compiled anymore.
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
[Romain:
add AMLOGIC_BOOT_FIP_REDISTRIBUTE = NO
add qstrip for BR2_PACKAGE_HOST_AMLOGIC_BOOT_FIP_DEVICE
remove build-fip-all.sh copy, not needed
factorize file copy in HOST_AMLOGIC_BOOT_FIP_INSTALL_CMDS
update commit log with the github url where we can find the list of supported SoCs.
]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
We can expand the list of supported musl architectures by
letting libucontext provide required context API's.
Use the following table to determine which architectures require
libucontext for BR2_PACKAGE_LIBUNWIND_MUSL_CONTEXT_REQUIRED:
https://github.com/libunwind/libunwind/tree/v1.6.2#libc-requirements
Enable BR2_PACKAGE_LIBUNWIND_ARCH_SUPPORTS if we have
BR2_PACKAGE_LIBUCONTEXT_ARCH_SUPPORTS or if context is not required
by checking for !BR2_PACKAGE_LIBUNWIND_MUSL_CONTEXT_REQUIRED.
Select BR2_PACKAGE_LIBUCONTEXT when selecting BR2_PACKAGE_LIBUNWIND
if we have BR2_PACKAGE_LIBUNWIND_MUSL_CONTEXT_REQUIRED.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The post-image.sh script is used in several STM32MP157-based board
configs. It had hardcoded device tree file names for the supported
boards which were used for matching the expected TF-A binary name.
Replace this mechanism with a pair of grep and sed that build the TF-A
binary name from the device tree file name. For example, if
BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES contained
DTB_FILE_NAME=stm32mp157c-dk2.dtb, the appropriate TF-A file would be
named tf-a-stm32mp157c-dk2.stm32.
Since the Bash Here Strings are removed with this change, I took the
opportunity to remove the only other non-POSIX command, "local", and
then I was able to change the shebang to plain /bin/sh, with -eu for
simpler error handling.
Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit b9bf1c6535 (package/opkg-utils: add opkg-utils as target pkg)
misspelled the macro to install to target, most probably as a bad
copy-paste from the host macro.
Fix that.
Reported-by: Michael Hacker <mh@superbox.one>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We want to initialize the kernel random number generator as soon as
possible, as early init scripts may also need random numbers (E.G.
syslog-ng in S01syslog-ng does).
Seedrng was presumably only using S20 because the previos urandom script
used S20, which (after som moves) dates all the way back to:
commit 8262508fc4
Author: Eric Andersen <andersen@codepoet.org>
Date: Fri Apr 26 22:01:43 2002 +0000
With this update, everything now works as expected.
-Erik
Seedrng needs persistent storage, but mount -a is run before executing the
init scripts, so S01 should be as good as S20 - Atleast with the scripts in
upstream Buildroot.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The gnu-efi package was enabled on mips64el by commit
11b347c03a ("package/gnu-efi: add
mips64el support"). However, it has been failing to build for a long
time, and nobody bothered fixing it:
gnu-efi-3.0.15//gnuefi/crt0-efi-mips64el.S:71: Error: cannot represent BFD_RELOC_16 relocation in this object file format
Even reverting back to gnu-efi 3.0.10, which was the version used at
the time of 11b347c03a, does not fix the
issue. We tested updating to the latest gnu-efi version, 3.0.17, and
the problem still exists.
Since EFI on MIPS is extremely niche, we don't really want to invest
the time to fix this issue, so let's disable it again. If someone
cares enough, it can be fixed and re-enabled.
Fixes:
http://autobuild.buildroot.net/results/d5938edcf50ebb7fdcec148d73f402845079779d/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure with gpsd >= 3.25 raised since commit
3c7fece853:
In file included from src/configuration.h:50,
from src/configuration.c:46:
src/gpsdclient.h:64:8: error: redefinition of 'struct fixsource_t'
64 | struct fixsource_t {
| ^~~~~~~~~~~
In file included from src/gpsdclient.h:49,
from src/configuration.h:50,
from src/configuration.c:46:
/tmp/instance-17/output-1/host/aarch64-buildroot-linux-gnu/sysroot/usr/include/gps.h:2714:8: note: originally defined here
2714 | struct fixsource_t
| ^~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/47a619686bb47debd525c92aa7e14bee5c40ca9e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Mako provide some external plugins that requires additionnal and
optional runtime dependencies, make sure we test these situations.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some extensions of python-mako use python-babel, if they are used,
python-babel must be added as a runtime dependency.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some extensions of python-mako use python-pygments, if they are used,
python-pygments must be added as a runtime dependency.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This new runtime test allows to make sure that the python-mako package
minimally works at runtime.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- To match NXP 6.1.22-2.0.0 release.
- EULA/COPYING: update to LA_OPT_NXP_Software_License v45.
Signed-off-by: Chris Dimich <cdimich2188@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- To match NXP 6.1.22-2.0.0 release.
- EULA/COPYING: update to LA_OPT_NXP_Software_License v45.
Signed-off-by: Chris Dimich <cdimich2188@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- To match NXP 6.1.22-2.0.0 release.
- EULA/COPYING: update to LA_OPT_NXP_Software_License v45.
Signed-off-by: Chris Dimich <cdimich2188@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the linux-imx kernel to be aligned with the NXP BSP
LF6.1.22_2.0.0 (same release used in meta-freescale [1]).
Add BR2_TARGET_UBOOT_NEEDS_GNUTLS=y and BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y
since they are new dependencies for building mkeficapsule u-boot tool.
The uboot-imx doesn't use the default imx8mp-evk devicetree anymore due
to commit [2]:
"Change to use imx8mp-evk-revb4.dtb and imx8mp-ddr4-evk-revb4.dtb
as default kernel DTB for iMX8MP re-design EVK board. Old EVK
board is EOL, to boot old EVK, user can switch to old DTB manually."
Since the freescale_imx8mpevk_defconfig only install imx8mp-evk.dtb in
the final image, the boot stop with:
Booting from mmc ...
Failed to load 'imx8mp-evk-revb4.dtb'
WARN: Cannot load the DT
Add a u-boot defconfig fragment to revert this change [2] and use the
imx8mp-evk.dtb by default.
Runtime tested on i.MX 8M Plus EVK REV B2.
[1] https://github.com/Freescale/meta-freescale/commit/e6b1b6725cd1d44550ba473ff6a80c1b80663965
[2] https://github.com/nxp-imx/uboot-imx/commit/a60e787a6e35b9c14c391e03d41468e4ad63d598
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit
55e83008fc ("package/gcc/gcc-final:
rework installation of libgcc_s/libatomic"), we reworked the libgcc_s
installation. In the previous code, libgcc_s was installed to
STAGING_DIR/TARGET_DIR unconditionally, but a "-cp" command was used,
which means that any failure was ignored. As we are now more picky, it
has become clear that this in fact wasn't entirely correct: libgcc_s
only exists for shared builds. For static builds, only libgcc.a is
available, but it doesn't need to be installed to STAGING_DIR (for
some reason, and as it was never installed by Buildroot, it has always
worked without libgcc.a in STAGING_DIR).
So long story short: we change the code to only install libgcc_s when
BR2_STATIC_LIBS is disabled. This fixes the following build failure on
BR2_STATIC_LIBS=y builds:
cp -dpf /home/thomas/buildroot/buildroot/output/host/arm-buildroot-linux-uclibcgnueabi/lib*/libgcc_s* /home/thomas/buildroot/buildroot/output/host/arm-buildroot-linux-uclibcgnueabi/sysroot/lib/
cp: cannot stat '/home/thomas/buildroot/buildroot/output/host/arm-buildroot-linux-uclibcgnueabi/lib*/libgcc_s*': No such file or directory
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for Orangepi Zero3 board:
- U-Boot 2021.07 fork by Orangepi
- Linux 6.1.31 fork by Orangepi
- Default packages from buildroot
Enable CONFIG_MFD_AC200 as it is used directly by other module,
resulting in build failure when disabled.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Tested-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The buildroot-association repository used to be hosted on Github, then
was closed for some banking issues. We're now making it public again,
but on Gitlab like the rest of Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now that the snapshot tarball section is gone, the "Source code" block
has only one sub-block "Repository" which makes it look odd. So bring
the sub-block content into the parent block, and rename this parent
block "Git repository".
As this requires re-indenting the whole HTML soup, take advantage of
this to use <p>...</p> in a more correct manner.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: fix "git pull" layout]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We're now using Gitlab as our official Git repository, so let's update
the website accordingly. Gitlab only provides https:// access, so drop
the explanation about the Git native protocol being more efficient
than HTTP (also because that's no longer true).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a host option to build the xml2cpp-codegen part of the
sdbus-cpp package for use in creating adaptor and proxy
implementations from the D-Bus IDL.
Signed-off-by: Charles Hardin <ckhardin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 32cec3be97 (docs/manual: rename *.txt as *.adoc) renamed the manual
files but forgot to update the reference in the DEVELOPERS file, causing
check-package to warn:
WARNING: 'docs/manual/adding-packages-meson.txt' doesn't match any file, line 851
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds the licensing information for the host-gcc-initial,
host-gcc-final and gcc-final packages.
For host-gcc-initial and host-gcc-final, instead of duplicating the
information, we use common variables coming from gcc.mk.
Of course for the target gcc-final, we use a different license than
for host-gcc-final, as it's the whole point of this series: be able to
describe that the target side of gcc is GPL-3.0 with linking
exception.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
This commit adds a target package "gcc-final", which is a target
package responsible for installing the gcc runtime libraries to
STAGING_DIR and TARGET_DIR. This task was so far done by the host
gcc-final package.
The motivation for splitting it up into a target package is to be able
to properly handle the licensing situation of GCC, where the host part
of GCC (the compiler itself) is under GPLv3, but the runtime libraries
on the target are under GPLv3-with-exception. So far, we were not
handling at all the license of gcc.
So what this commit does is:
* Add a gcc-final target package, which is depended on by the
toolchain-buildroot package, and which depends on
host-gcc-final.
* Moves to gcc-final the logic for installing target/staging
libraries
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The HOST_GCC_FINAL_M68K_LIBGCC_FIXUP hook is tweaking the staging
directory. In preparation for additional rework, let's move it further
down in the file so that the diff of the rework will be easier to look
at.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Right now the library installation was split between installation of
static libs vs. shared libs. In preparation for additional rework, it
makes more sense to split it between target installation and staging
installation.
For staging installation we simply install $(lib)* so that both static
and shared libraries are copied.
For target installation, we only install when shared libraries are
used, and we copy $(lib).so*
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
This provides better error handling, and is more in line with our
current coding style. We also replace ";" by "&&" for the same reason
of proper error handling.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
We typically don't define empty variables in Buildroot, and the
comment is a bit useless, so drop both.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The installation of libgcc_s/libatomic (which have to go in /lib) is
handled differently than all the other libraries (which go in
/usr/lib). For consistency, and in preparation for additional changes
in this area, handle both in a more consistent manner, with a new
HOST_GCC_FINAL_LIBS that looks like HOST_GCC_FINAL_USR_LIBS.
Consequently, the hook HOST_GCC_FINAL_INSTALL_USR_LIBS is renamed to
HOST_GCC_FINAL_INSTALL_LIBS, and made unconditional rather than being
conditional on ifneq ($(HOST_GCC_FINAL_USR_LIBS),). Indeed, we now
need to install libraries in /lib unconditionally, and if
HOST_GCC_FINAL_USR_LIBS is empty, the loops will simply not iterate on
any element, and they will not install anything in /usr/lib.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The weston runtime test uses the CRC of the framebuffer to detect that
"something" is being drawned on the framebuffer. This requires that the
sampling of the CRC happens does not happen too early after trigerring
an action, or the rendering may be not be finishe, either:
- weston may not have had time to initialise, or
- the test application may not have started rednering,
The sequence of rendering that has been observed yields this sequence of
CRCs (elided for brevity):
- boot:
- alternating between 0x4c4126bf and 0x5d2f9aa5: console cursor
blinking
- start weston:
- 0x4c4126bf: weston switches to a cleared vt, no blinking cursor
...
- 0xe54b7895: weston is starting
...
- 0xe54b7895: wayland socket appears!
...
- 0x6bf28bdf: weston is ready
...
- start weston-simple-egl:
- 0x6bf28bdf: application is starting
...
- 0xNNNNNNNN: random CRCs while the application renders
...
- stop weston-simple-egl:
- 0xNNNNNNNN: zero, one, or two random CRCs while the application
renders before it handles SIGTERM
- 0x6bf28bdf: application is stopped
...
- stop weston:
- 0x6bf28bdf: a few CRC identical to when weston was started, while
weston is processing SIGTERM
- oscillating between 0x4c4126bf and 0x5d2f9aa5: console cursor
blinking, back to initial vt, weston dead.
So, we need to wait "enough" after each action. Moreover, when the
wayland socket appears, weston may not have stabilised yet, so we also
need to wait after the socket appears.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Julien Olivain <ju.o@free.fr>
When testing the virt machine with EDK2, the buildroot 6.1 kernel
will not boot as it has no base ACPI support. Whilst you can run
qemu with the -no-acpi option, it would help if basic ACPI support
was there as otherwise there is no output from the kernel post the
ACPI BIOS initialisation.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building go with cgo support needs to build some .c files to generate target
support code, and thus calls the cross C compiler, which is failing when the
toolchain is not built before host-go:
>>> host-go 1.21.1 Building
cd .../build/host-go-1.21.1/src && GO111MODULE=off GOCACHE=.../per-package/host-go/host/share/host-go-cache GOROOT_BOOTSTRAP=.../per-package/host-go/host/lib/go-1.19.11 GOROOT_FINAL=.../per-package/host-go/host/lib/go GOROOT=".../build/host-go-1.21.1" GOBIN=".../build/host-go-1.21.1/bin" GOOS=linux CC=/usr/bin/gcc CXX=/usr/bin/g++ CGO_ENABLED=1 CC_FOR_TARGET=".../per-package/host-go/host/bin/arm-linux-gcc" CXX_FOR_TARGET=".../per-package/host-go/host/bin/arm-linux-g++" GOOS="linux" GOARCH=arm GOARM=6 GO_ASSUME_CROSSCOMPILING=1 ./make.bash
Building Go cmd/dist using .../per-package/host-go/host/lib/go-1.19.11. (go1.19.11 linux/amd64)
go tool dist: cannot invoke C compiler [".../per-package/host-go/host/bin/arm-linux-gcc"]: fork/exec .../per-package/host-go/host/bin/arm-linux-gcc: no such file or directory
Go needs a system C compiler for use with cgo.
To set a C compiler, set CC=the-compiler.
To disable cgo, set CGO_ENABLED=0.
This happens systematically with PPD, and happens without PPD when
host-go is explicitly built (by running: "make host-go").
Since only CGO support needs to compile C files, only add the toolchain
dependency in that case.
When the target is not supported by go, then there is obviously no need
to depend on the toolchain (even if we unconditionally enable cgo
support in only-for-the-host host-go).
Signed-off-by: Christian Stewart <christian@aperture.us>
[yann.morin@orange.com:
- only add the toolchain dependency for target cgo
- reword commit log
]
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Anisse Astier <anisse@astier.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 0c15169f5a (package/pppd: bump version to 2.5.0) forgot to drop
the check-package exclusion when it dropped the patches.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is a simple test that builds and runs the futter-gallery application and
checks if the service is active.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: fix flake8 warnings]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Flutter Gallery is a resource to help developers evaluate and use Flutter.
It is a collection of Material Design & Cupertino widgets, behaviors, and
vignettes implemented with Flutter.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
flutter-pi is one of many flutter-embedders. However, flutter-pi is unique
because it doesn't require X or Wayland to run. So long as there is support for
KMS and DRI flutter-pi should run on any platform that flutter-engine supports.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: drop unused BR2_PACKAGE_FLUTTER_PI_TEST_PLUGIN]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
There are many issues with this package:
- The release tarballs from https://github.com/flutter/engine are in no state
to compile. They are only for the use of gclient to download a source
directory structure suitable to build the Flutter engine! If you download,
extract and attempt to run `./tools/gn --no-goma --no-prebuilt-dart-sdk`, you
receive the error message:
`No such file or directory: 'flutter/flutter/third_party/gn/gn.'
But wait! Wasn't the gn binary just called? No, that's a wrapper in the
Flutter source tree that formats arguments to call the real gn binary.
The real gn is not provided in the tarball but is downloaded via gclient
(among many other supporting repositories.)
Even worse, the flutter buildsystem depends on the .git dirs being present.
(https://github.com/meta-flutter/meta-flutter/issues/271) This dependency
means it is not possible to create a reproducible tarball from the downloaded
sources, which is why there is no .hash file provided.
I have asked the flutter project to release full tarballs suitable for
compiling here: https://github.com/flutter/flutter/issues/130734
- Flutter engine includes a patched copy of clang that must be used to compile.
Using a Buildroot-build clang results in linking warning and errors.
As such, we depend on LLVM_ARCH_SUPPORTS but use the included clang for
building. On the plus side, this saves time having to compile clang.
- flutter-engine relies on the "PUB_CACHE", that is provided by flutter-sdk,
so we need a build dependency, even if no tool from host-flutter-sdk-bin
is used to build flutter-engine
Tested with:
- Debian 11 and 12
- Ubuntu 18.04, 20.04, and 22.04
- Fedora 38
- Per-package directories
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr:
- search gclient.py from PATH
- indent shell script with 4 spaces
- reorganise schell script with prepare/cleanup
- tweak comment about weirdness of flutter buildsystem
- use suitable-extactor and TAR_OPTIONS
- use FLUTTER_SDK_BIN_PUB_CACHE
- add dependency to host-futter-sdk-bin (Adam)
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
flutter-sdk-bin is a collection of host tools and plugins used to compile
flutter applications.
- As this is a collection of pre-compiled tools, append -bin to the end of the
package name.
- We must set the HOME directory variable to the sdk directory or else the
flutter dart binaries place .dart, .dart-sdk, and .flutter in ~/.
- set --clear-features, --no-analytics and --disable-telemetry first to disable
google tracking as soon as possible.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr:
- set FLUTTER_SDK_BIN_PUB_CACHE for other packages to make use of it
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Chromium and Chromium OS use a package of scripts called
depot_tools to manage checkouts and code reviews. This package
also includes the gclient utility.
gclient is a Python script to manage a workspace of modular dependencies that
are each checked out independently from different subversion or git
repositories. Features include:
- Dependencies can be specified on a per-OS basis.
- Dependencies can be specified relative to their parent dependency.
- Variables can be used to abstract concepts.
- Hooks can be specified to be run after a checkout.
- .gclient and DEPS are Python scripts. You can hack in easily or add
additional configuration data.
.gclient file: It's the primary file. It is, in fact, a Python script. It
specifies the following variables:
- solutions: an array of dictionaries specifying the projects that will be
fetched.
- hooks: additional hooks to be run when this meta checkout is synced.
- target_os: an optional array of (target) operating systems to fetch
OS-specific dependencies for.
- cache_dir: Primarily for bots, multiple working sets use a single git
cache.
gclient is necessary for checking out the flutter-engine source code, as the
release tarballs provided on the flutter-engine github are in no state to
compile. Google expects the use of gclient to download a source directory
structure suitable to build the Flutter engine.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Removed all patches, they are now included in this release.
Added other patches fixing errors.
Removed option BR2_PACKAGE_PPPD_RADIUS, upstream build system, now auto-
conf-based, does not support disabling the radius plugin.
Removed BR2_PACKAGE_PPPD_OVERWRITE_RESOLV_CONF, upstream now defaults to
/etc, quoting README:
"Note that if you have built and installed previous versions of this
package and you want to continue having configuration and TDB files in
/etc/ppp, you will need to use the --sysconfdir option to ./configure."
Switched build system to autoconf, added optional systemd support.
Added configure option to enable multilink support which now defaults to
false but was enabled before:
https://github.com/ppp-project/ppp/blob/2.4.9/pppd/Makefile.linux#L57
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit updates monit to the latest 5.33.0 version which also
requires an additional patch to configure.ac as well as enabled ipv6
support.
Signed-off-by: Jens Maus <mail@jens-maus.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove no longer supported soup2 config option
We now build webkit with soup3 so we need to set wpe_api to 2.0 to
be compatible.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We can now significantly simplify the python-rtoml build using the
new setuptools-rust setup type introduced in the python package
infrastructure.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
We can now significantly simplify the python-orjson build using the
new maturin setup type introduced in the python package
infrastructure.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
We can now significantly simplify the python-cryptography build using
the new setuptools-rust setup type introduced in the python package
infrastructure.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The python-maturin build backend while itself is a pep517 backend
uses setuptools-rust for bootstrapping purposes.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Python has two build backends for packages that use Rust:
setuptools-rust and maturin. Both are provided by the pyo3 package
infrastructure (but that's not relevant for Buildroot).
The setuptools-rust build backend is a setuptools extension that is
capable of building python rust extensions.
The maturin build backend is a pep517 build extension that is itself
written in rust, it is itself bootstrapped using setuptools-rust but
is not itself a setuptools extension.
Both are from the pyo3 build infrastructure, so we add both of them in a
single patch. They also share a lot of the cargo-specific handling.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Arnout: remove the _PYO3_ENV variables, the add little benefit]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
While building host-localedef from glibc 2.38 sources, it uses the
features.h header from its sources that define _ISOC2X_SOURCE 1 as
soon as _GNU_SOURCE is defined.
_ISOC2X_SOURCE enable __GLIBC_USE_ISOC2X 1 that enable the header
redirection to use __isoc23_* functions introduced in glibc 2.38 [1].
If an older version is installed on the host, those functions
doesn't exist and break the build.
Add a local patch to keep _ISOC2X_SOURCE and __GLIBC_USE_ISOC2X
disabled.
Fixes:
host-localedef-2.38-13-g92201f16cbcfd9eafe314ef6654be2ea7ba25675/build/locale/ld-ctype.o: in function `ctype_read':
ld-ctype.c:(.text+0x6cef): undefined reference to `__isoc23_strtoul'
(glibc 2.31 installed on the host)
[1] https://sourceware.org/git/?p=glibc.git;a=commit;h=64924422a99690d147a166b4de3103f3bf3eaf6c
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enable mathvec explicitly on aarch64(be) since it's now enabled by
default [1]. aarch64 mathvec requires at gcc-10 but Buildroot already
provide gcc-11 as minimum version.
Don't use --enable-fortify-source for now in order to keep original
behavior while doing the glibc version bump (and because some
architecture doesn't support well fortify-source, i.e Microblaze).
Postpone this change to a follow up commit.
Keep the "deprecated" libcrypt enabled just in case if some
application are not yet ready to use an alternative such as libxcrypt.
Security related changes:
CVE-2023-25139: When the printf family of functions is called with a
format specifier that uses an <apostrophe> (enable grouping) and a
minimum width specifier, the resulting output could be larger than
reasonably expected by a caller that computed a tight bound on the
buffer size. The resulting larger than expected output could result
in a buffer overflow in the printf family of functions.
See:
https://lists.gnu.org/archive/html/info-gnu/2023-07/msg00010.html
Runtime tested with Qemu on Gitlab-ci:
https://gitlab.com/kubu93/buildroot/-/pipelines/998435203https://gitlab.com/buildroot.org/toolchains-builder/-/pipelines/998926028
[1] https://sourceware.org/git/?p=glibc.git;a=commit;h=cd94326a1326c4e3f1ee7a8d0a161cc0bdcaf07e
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE_2023-5217: Heap buffer overflow in vp8 encoding in libvpx in
Google Chrome prior to 117.0.5938.132 and libvpx 1.13.1 allowed a remote
attacker to potentially exploit heap corruption via a crafted HTML page.
https://www.openwall.com/lists/oss-security/2023/09/28/5
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
[Peter: extend commit message, add _IGNORE_CVES]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Small improvements to on-screen use only. CLI -B and GUI 'B' to toggle
boxes around stats. CLI -^ and '^' to change units for Disk I/O KB/s ->
MB/s -> GB/s. This happen temporarily too if the size of the statistic
will not fit on-scree. Code changed to ensure clean compile for GCC 12
which does extra checks but got confused by some perfectly good C code!
Note: updated makefile makefile
https://nmon.sourceforge.io/pmwiki.php?n=Site.CompilingNmon
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop LDFLAGS_EXTRA to fix the following build failure raised since
commit 42f2518023:
/home/buildroot/autobuild/run/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/mipsel-buildroot-linux-gnu/12.3.0/../../../../mipsel-buildroot-linux-gnu/bin/ld: stress-crypt.o: in function `$L17':
stress-crypt.c:(.text+0x2dc): undefined reference to `crypt_r'
Fixes:
- http://autobuild.buildroot.org/results/0c1d2ef59b88ebb3ae10bf8cb986280b4c1283eb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we have a template generating an equivalent genimage configuration.
The generated genimage is identical to these +/- file ordering and a
trailing comma / newline that is ignored by genimage, E.G. for rpi3-64:
@@ -8,9 +8,10 @@
"rpi-firmware/cmdline.txt",
"rpi-firmware/config.txt",
"rpi-firmware/fixup.dat",
- "rpi-firmware/start.elf",
"rpi-firmware/overlays",
- "Image"
+ "rpi-firmware/start.elf",
+ "Image",
+
}
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The rpi genimage configurations are all identical, except for the boot
partition files, which include:
- Device tree files (*.dtb)
- rpi-firmware files (rpi-firmware/*)
- Kernel image (Image/zImage)
All of these are quite simple to figure out programmatically based on the
content of BINARIES_DIR, so extend post-image.sh to fall back to generating
a genimage configuration based on genimage.cfg.in if a board specific one
does not exist.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2023-35852: In Suricata before 6.0.13 (when there is an
adversary who controls an external source of rules), a dataset
filename, that comes from a rule, may trigger absolute or relative
directory traversal, and lead to write access to a local filesystem.
This is addressed in 6.0.13 by requiring allow-absolute-filenames and
allow-write (in the datasets rules configuration section) if an
installation requires traversal/writing in this situation.
- Fix CVE-2023-35853: In Suricata before 6.0.13, an adversary who
controls an external source of Lua rules may be able to execute Lua
code. This is addressed in 6.0.13 by disabling Lua unless allow-rules
is true in the security lua configuration section.
- Drop first patch (not needed since
https://github.com/OISF/suricata/commit/c8a3aa608eaae1acbaf33dba8a7c1a3cbfeb4285)
https://github.com/OISF/suricata/blob/suricata-6.0.14/ChangeLog
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix CVE-2023-38633: A directory traversal problem in the URL decoder of
librsvg before 2.56.3 could be used by local or remote attackers to
disclose files (on the local filesystem outside of the expected area),
as demonstrated by href=".?../../../../../../../../../../etc/passwd" in
an xi:include element.
https://gitlab.gnome.org/GNOME/librsvg/-/blob/2.50.9/NEWS
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The COPYING also contains a BSD-3-Clause license. The BSD-3-Clause
applies to "manual page unifdef.1 and the portability support code in
the FreeBSD subdirectory". The BSD-2-Clause applies to everything else.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Reviewed-by: Thomas Devoogdt <thomas@devoogdt.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 84c24ab1b5 (package/nodejs: fix parallel build) made use of
BR2_JLEVEL to set the number of jobs nodejs should use instead of using
the number of CPUs (+2).
However, BR2_JLEVEL can be set to 0 by the user, to let Buildroot detect
the number of CPUs (+1), and stores it in PARALLEL_JOBS, and leaves
BR2_JLEVEL untouched, so 0.
Thus, we can end up spawning a build by passing -j0 to ninja, which it
interprets as "no -limit yolo" and does not limit the number oj jobs it
spawns, which usually ends up in an OOM somewhere...
Fix this by using PARALLEL_JOBS.
Reported-by: Cédric & Co
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix CVE-2023-3341: The code that processes control channel messages sent
to `named` calls certain functions recursively during packet parsing.
Recursion depth is only limited by the maximum accepted packet size;
depending on the environment, this may cause the packet-parsing code to
run out of available stack memory, causing `named` to terminate
unexpectedly. Since each incoming control channel message is fully
parsed before its contents are authenticated, exploiting this flaw does
not require the attacker to hold a valid RNDC key; only network access
to the control channel's configured TCP port is necessary. This issue
affects BIND 9 versions 9.2.0 through 9.16.43, 9.18.0 through 9.18.18,
9.19.0 through 9.19.16, 9.9.3-S1 through 9.16.43-S1, and 9.18.0-S1
through 9.18.18-S1.
https://ftp.isc.org/isc/bind9/9.16.44/CHANGES
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 6.4.x series is now EOL upstream, so drop the linux-headers option
and add legacy handling for it.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When nodejs is build, a qemu wrapper script is used to execute some
programs built for the target in user-mode emulation. However, when the
target and build machines are similar (e.g. x86_74), running those
programs fails, with errors such as:
cd ../../tools/v8_gypfiles; python ../../deps/v8/tools/run.py ../../out/Release/v8-qemu-wrapper ../../out/Release/bytecode_builtins_list_generator ../../out/Release/obj.host/gen/generate-bytecode-output-root/builtins-generated/bytecodes-builtins-list.h
../../out/Release/bytecode_builtins_list_generator: /lib/x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.29' not found (required by ../../out/Release/bytecode_builtins_list_generator)
../../out/Release/bytecode_builtins_list_generator: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.33' not found (required by ../../out/Release/bytecode_builtins_list_generator)
../../out/Release/bytecode_builtins_list_generator: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by ../../out/Release/bytecode_builtins_list_generator)
../../out/Release/bytecode_builtins_list_generator: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.34' not found (required by ../../out/Release/bytecode_builtins_list_generator)
Return code is 1
So the question is: why the heck does Qemu use the host C library?
To answer this question, we first have to look at how the -L option of
Qemu is implemented. This option is documented as such:
-L path QEMU_LD_PREFIX set the elf interpreter prefix to 'path'
The v8-qemu-wrapper script makes this option point to $(STAGING_DIR),
so that the ELF interpreter used is the one in $(STAGING_DIR).
However, contrary to what the option documentation says, this option
does much more than setting the ELF interpreter prefix: it is going to
affect how *all* system calls manipulating files (open, etc.) are
going to work.
When this option is passed, the function init_paths() in
https://git.qemu.org/?p=qemu.git;a=blob;f=util/path.c is called at
initialization time, and essentially its sets the global "base"
variable to point to the directory passed as -L argument.
Then, for every single syscall that manipulates a path, this path will
be passed through the path() function in the same file. This function
will first attempt to resolve the path with "base" as a prefix, and if
not, return the unprefixed path.
After adding some traces into this function, I was able to understand
what happens:
(1) -L$(STAGING_DIR) is passed, causing "base" to point to
$(STAGING_DIR)
(2) The target ELF interpreter from $(STAGING_DIR) is properly invoked
(3) When this ELF interpreter then resolves the libc.so.6 library, it
first looks for /etc/ld.so.cache.
(4) Qemu first looks for /etc/ld.so.cache with the -L prefix, i.e
$(STAGING_DIR)/etc/ld.so.cache, but it does not exist. So, the Qemu
system call emulation falls back to /etc/ld.so.cache, which means
the target ELF interpreter reads the /etc/ld.so.cache of the host
system.
(5) This /etc/ld.so.cache of the host system says that libc.so.6 is in
/lib/x86_64-linux-gnu/
(6) The target ELF interpreter therefore tries to use
/lib/x86_64-linux-gnu/libc.so.6. The Qemu system call emulation
first tries $(STAGING_DIR)/lib/x86_64-linux-gnu/libc.so.6, but
this library does not exist (it is in
$(STAGING_DIR)/lib/libc.so.6), so the Qemu system call emulation
falls back to /lib/x86_64-linux-gnu/libc.so.6 of the host system,
which exist... but is too old compared to the target C library.
Indeed, results from ld.so.cache take precedence over the simple
resolution of library paths in /usr/lib and /lib.
We see 3 possible ideas to resolve this problem:
(A) Change the behavior of Qemu to not fallback to unprefixed paths:
when -L is passed, all path-related system calls should see the
paths prefixed by the -L option.
Issue with this is that this change is unlikely to get accepted by
Qemu upstream. And there might be some side effects we have not
really identified.
(B) Create an empty $(STAGING_DIR)/etc/ld.so.cache. We have tested
this solution and it works: it gets used instead of the host
/etc/ld.so.cache. Because $(STAGING_DIR)/etc/ld.so.cache is empty,
there's no libc.so.6 match, so the target ELF interpreter goes
through its normal library location resolution logic, which falls
back to trying in /usr/lib and /lib, which works as those paths
ends up being prefixed with $(STAGING_DIR) by Qemu.
(C) Pass LD_LIBRARY_PATH pointing to $(STAGING_DIR)/lib and
$(STAGING_DIR)/usr/lib in the Qemu wrapper. This works because
LD_LIBRARY_PATH paths have precedence over paths given by
ld.so.cache.
This is the solution already used by the GOI qemu wrapper in
package/gobject-introspection/g-ir-scanner-qemuwrapper.in.
We chose to go with the third option, because it has been proven to work
for the GOI wrapper, and has been reported to solve #14366. Even though
the first option would be the best, it is also the one that has the
least chances to land any time soon (if ever); the second has not been
exercised, and the impact is not fully understood either (e.g what about
non-glibc toolchains?).
Fixes: #14366
Signed-off-by: Jens Maus <mail@jens-maus.de>
[yann.morin.1998@free.fr:
- add whole analsys done by Thomas in:
https://lore.kernel.org/buildroot/20221031213926.50d3c778@windsurf/
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Unless told otherwise, ninja will spawn as many jobs as there are CPU
(plus 2). Nodejs is built with ninja, but it is a generic package, so
there is no variable (like with cmake-package) that passes the proper
number of parallel jobs as configured by the user.
As a consequence, the nodejs build will use as many CPU as are
available, possibly overcommitting the rsources the user expected to be
used.
Set the JOBS variableto limit that number.
Signed-off-by: Jens Maus <mail@jens-maus.de>
[yann.morin.1998@free.fr: reword commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit fixes a problem where the NUT package couldn't be
used as a NUT server due to the fact that the default group for
nobody is "nogroup" and not "nobody" like the internal default
of NUT. Thus, when starting a NUT server daemon the daemon starts
with incorrect group permissions. This commit fixes this
shortcoming by introducing a dedicated 'nut' user and 'nut' group
to drop priviledges to it.
Signed-off-by: Jens Maus <mail@jens-maus.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
For release announce, see:
https://lists.infradead.org/pipermail/kexec/2023-August/027830.html
This new version introduced a usage of memfd_create() in [1]. This
function was introduced in Kernel 3.17. Therefore, this commit adds
this new dependency. This direct use of memfd_create() requires a
glibc >= 2.27. As is, this version would no longer work with uclibc-ng
or musl libc. This commit also adds a patch to allow compilation with
glibc < 2.27, and also uclibc and musl. See the patch commit log for
more details.
[1] https://git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git/commit/?id=714fa11590febc9cf6fd3c6309374a040a05ebb0
Signed-off-by: Julien Olivain <ju.o@free.fr>
[yann.morin.1998@free.fr: add arch dependency to comment]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The affected code isn't present in any release, see [0].
[0]: https://www.libssh.org/2023/07/14/cve-2023-3603-potential-null-dereference-in-libsshs-sftp-server/
The CPE entry for this CVE is
cpe:2.3:a:libssh:libssh:-:*:*:*:*:*:*:*
We interpret the "-" as matching any version. It actually means
"unspecified version", which is the cop-out in case there is nothing
useful to match. We can't really make our infrastructure ignore "-"
entirely, because for all we know our version is an unreleased commit
sha which _is_ vulnerable. Thus, the only way out is an exclusion which
we'll never be able to remove.
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Allow enabling support for both the X11 and Wayland backends.
This in turn needs reorganizing how desktop GL or OpenGL ES is chosen,
as it no longer can depend on whether Wayland support is enabled: the
BR2_PACKAGE_HAS_LIBGL and BR2_PACKAGE_HAS_LIBGLES variables are both
checked, and ENABLE_GLES2 is set only if the package providing OpenGL
claims only GLES is supported; otherwise desktop GL is preferred. This
matches the existing logic.
The existing comment indicating that only one of both windowing systems
can be enabled was wrong: the same WebKitGTK build can target both
X11 and Wayland at the same time, as long as GTK itself has been built
accordingly. Enabling both is the approach taken by most Linux
distributions, and has been supported for years.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Devoogdt <thomas.devoogdt@barco.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Sometimes it happens that a Company or a Physical Person sponsors the
creation and/or the upstreaming process of a patch, but at the moment
there is no way to give credits to it. In Linux they prepend '+sponsor'
to the e-mail of the contributor in both authorship and commit log tag as
discussed here[0]. So let's describe in the manual how to do that as a
standard.
[0]: https://lore.kernel.org/linux-doc/20230817220957.41582-1-giulio.benetti@benettiengineering.com/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr:
- reword to reference sub-addressing and the RFC
- move to the "submitting patches" section, that already deals with
SoB tags
- differentiate between Your/Their names
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Per default, the fio package uses the "-march=native" GCC option. This
is of course wildly inappropriate for cross-compilation and can result
in illegal instructions. Thus we make sure fio will not use that
compiler option by adding --disable-native to FIO_OPTS.
Signed-off-by: Jens Maus <mail@jens-maus.de>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This commit integrates support for the iwlwifi QuZ firmware files
to support the wifi chipsets for the intel NUC10 type of hardware.
Thus, this change adds BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_QUZ.
Signed-off-by: Jens Maus <mail@jens-maus.de>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The commit 4e365d1768 "package/tcl: bump to version 8.6.13" did NOT
refreshed the package patch, because the patch was still applying
correctly and the package was working as expected.
It was refreshed in the previous bump, in commit 9cf314745a
"package/tcl: bump to version 8.6.12". This was part of 2022.02.
Looking closer at the patch content, the -/+ lines are exactly the
same. So this patch does not change anything. Since the file was kept
and the commit log mention a patch refresh, the intent was more
likely to carry over the old patch (which was declaring all libc
functions as "unbroken".
This commit actually refreshes this patch. It was regenerated with
git format-patch. Since the patch is renamed due to git format-patch,
the .checkpackageignore is updated accordingly.
Note:
This ancient patch will be removed soon, as an upstream commit [1],
not yet in a release, cleaned up and removed those old parts.
[1] https://github.com/tcltk/tcl/commit/04d66a25716cb7738dad3170cca4d0a4683db08a
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
As off 2022-11-22 CVE-2022-39377 is listed as affecting sysstat
< 2.16.1 instead of < 2.17.1. The text is not updated, but the CPE info
is.
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The install to staging commands of the ne10 package are careful to
install the shared libraries only if they are built, but we forgot to
use the same care for the install to target commands, causing a build
failure on BR2_STATIC_LIBS=y configurations as no shared library was
built:
cp: cannot stat '/home/autobuild/autobuild/instance-15/output-1/build/ne10-1.2.1/modules/libNE10*.so*': No such file or directory
This commit fixes this by guarding the target installation commands to
BR2_STATIC_LIBS being empty.
The problem exists since the package was introduced in commit
318f3db0dc ("ne10: new package"), a good
10 years ago. Most likely it was not seen for many years as this
package is only available for ARM with NEON and AArch64, and we were
not testing fully static builds, except for ARMv5 that don't have
NEON. Now that we are doing more random testing, the problem started
being visible.
Fixes:
http://autobuild.buildroot.net/results/45b2c1af052271bc2f1bb96544f138d29e4f7dfd/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
- tag prefix changed from 'release-' to 'v'
- C++14 is now required which gcc5 already provides
(tested with bootlin toolchain armv7-eabihf--glibc--stable-2017.05-toolchains-1-1)
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As off 2021-05-17 NVD added 1.19 as the first version that isn't
affected by CVE-2007-4476.
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
CVE-2022-45061 affects python <= 3.7.15, 3.8.0 through 3.8.15,
3.9.0 through 3.9.15, 3.10.0 through 3.10.8
The mentioned patch was removed in c38de813 when bumping to 3.11.1.
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
CVE-2021-32749 affects fail2ban <= 0.9.7, 0.10.0 through 0.10.6, and
0.11.0 through 0.11.2.
The mentioned patch was removed in 76853089 when bumping to 1.0.1.
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failures raised since bump to version 1.4.0 in
commit 456a739831:
-- Found PythonInterp: /usr/bin/python3.6 (found suitable version "3.6.9", minimum required is "3.6")
CMake Error at /home/buildroot/autobuild/run/instance-3/output-1/host/sparc64-buildroot-linux-gnu/sysroot/usr/share/cmake/pybind11/FindPythonLibsNew.cmake:147 (message):
Python config failure:
Traceback (most recent call last):
File "<string>", line 6, in <module>
ImportError: cannot import name 'sysconfig'
and
In file included from /home/buildroot/autobuild/instance-1/output-1/host/include/python3.11/Python.h:38,
from /home/buildroot/autobuild/instance-1/output-1/host/sh4-buildroot-linux-gnu/sysroot/usr/include/pybind11/detail/common.h:266,
from /home/buildroot/autobuild/instance-1/output-1/host/sh4-buildroot-linux-gnu/sysroot/usr/include/pybind11/attr.h:13,
from /home/buildroot/autobuild/instance-1/output-1/host/sh4-buildroot-linux-gnu/sysroot/usr/include/pybind11/detail/class.h:12,
from /home/buildroot/autobuild/instance-1/output-1/host/sh4-buildroot-linux-gnu/sysroot/usr/include/pybind11/pybind11.h:13,
from /home/buildroot/autobuild/instance-1/output-1/host/sh4-buildroot-linux-gnu/sysroot/usr/include/pybind11/numpy.h:12,
from /home/buildroot/autobuild/instance-1/output-1/build/zxing-cpp-2.1.0/wrappers/python/zxing.cpp:18:
/home/buildroot/autobuild/instance-1/output-1/host/include/python3.11/pyport.h:601:2: error: #error "LONG_BIT definition appears wrong for platform (bad gcc/glibc config?)."
601 | #error "LONG_BIT definition appears wrong for platform (bad gcc/glibc config?)."
| ^~~~~
Fixes:
- http://autobuild.buildroot.org/results/665b246a4bb14480152ee59050672a7469148a5b
- http://autobuild.buildroot.org/results/0502b05020de57e4910125c699c4264047187c51
- http://autobuild.buildroot.org/results/c5e7fe83d46c704e05800e3ae62bf476458c7b71
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with oprofile raised since bump of
binutils to version 2.40 in commit
35656482d3:
configure: error: bfd library not found
[...]
configure:17928: checking for bfd_openr in -lbfd
configure:17953: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/arm-linux-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c -lbfd -liberty -lpopt -ldl -lintl >&5
/home/buildroot/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/12.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: warning: libsframe.so.0, needed by /home/buildroot/autobuild/run/instance-1/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libbfd.so, not found (try using -rpath or -rpath-link)
Indeed, in this case, libsframe is not installed even after applying
commit 1b4d921e1d because
BR2_BINUTILS_VERSION_2_40_X is not selected by anyone (binutils package
is selected by oprofile and the toolchain is not generated by buildroot)
To fix this issue, invert the logic: install libsframe by default (i.e.
when binutils is selected or with a buildroot toolchain). libsframe will
not be installed only if binutils < 2.40 is detected.
Fixes:
- http://autobuild.buildroot.org/results/af9a2d52823a332b48e6df14d2708b6a4b3833a4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with gcc 4.8 raised since bump of snmppp
to version 3.5.0 in commit e011fa0415:
configure: error: Cannot find suitable libsnmp++ library
[...]
configure:9496: checking if libsnmp++ can be linked with flags from pkg-config
configure:9528: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/arm-none-linux-gnueabi-g++ -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=1 -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -D_XOPEN_SOURCE=XPG6 conftest.cpp -L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../arm-buildroot-linux-gnueabi/sysroot/usr/lib -lsnmp++ >&5
In file included from /home/buildroot/autobuild/run/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/snmp_pp/snmp_pp.h:71:0,
from conftest.cpp:92:
/home/buildroot/autobuild/run/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/snmp_pp/uxsnmp.h:628:35: error: 'nullptr' was not declared in this scope
CSNMPMessage *snmp_message = nullptr);
^
Fixes:
- http://autobuild.buildroot.org/results/f272473e7b588f5390b183072935a0217290ee4e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Drop patches (already in version) and so autoreconf
- Update COPYING hash (gpl mailing address updated with
https://github.com/Netatalk/netatalk/commit/9bd45cc06e02e9bbfe8156bb1e5e2843b7727a51https://github.com/Netatalk/netatalk/commit/6a5997fbd64d6cd5a5400ea6a0a930d005ed89df)
- Fix CVE-2022-43634: This vulnerability allows remote attackers to
execute arbitrary code on affected installations of Netatalk.
Authentication is not required to exploit this vulnerability. The
specific flaw exists within the dsi_writeinit function. The issue
results from the lack of proper validation of the length of
user-supplied data prior to copying it to a fixed-length heap-based
buffer. An attacker can leverage this vulnerability to execute code in
the context of root. Was ZDI-CAN-17646.
- Fix CVE-2022-45188: Netatalk through 3.1.13 has an afp_getappl
heap-based buffer overflow resulting in code execution via a crafted
.appl file. This provides remote root access on some platforms such as
FreeBSD (used for TrueNAS).
- Fix CVE-2023-42464: Validate data type in dalloc_value_for_key()
https://github.com/Netatalk/netatalk/blob/netatalk-3-1-17/NEWS
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A vulnerability was found in OpenSC. This security flaw cause a buffer
overrun vulnerability in pkcs15 cardos_have_verifyrc_package. The
attacker can supply a smart card package with malformed ASN1 context.
The cardos_have_verifyrc_package function scans the ASN1 buffer for 2
tags, where remaining length is wrongly caculated due to moved starting
pointer. This leads to possible heap-based buffer oob read. In cases
where ASAN is enabled while compiling this causes a crash. Further info
leak or more damage is possible.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Fix CVE-2023-40359: xterm before 380 supports ReGIS reporting for
character-set names even if they have unexpected characters (i.e.,
neither alphanumeric nor underscore), aka a pointer/overflow issue.
This can only occur for xterm installations that are configured at
compile time to use a certain experimental feature.
- Update COPYING hash (update in year and version)
https://invisible-island.net/xterm/xterm.log.html#xterm_384
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
CVE-2022-1304 only affects e2fsprogs 1.46.5.
The mentioned patch was removed in 6a21733f when bumping to 1.47.0.
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
CVE-2021-38185 affects cpio <= 2.13.
The mentioned patches were removed in b0306d94 when bumping to 2.14.
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As of 2021-05-14 CVE-2017-3139 is no longer listed as affecting bind, only RHEL.
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Fix CVE-2023-36664: Artifex Ghostscript through 10.01.2 mishandles
permission validation for pipe devices (with the %pipe% prefix or the |
pipe character prefix).
- Fix CVE-2023-38559: A buffer overflow flaw was found in
base/gdevdevn.c:1973 in devn_pcx_write_rle() in ghostscript. This
issue may allow a local attacker to cause a denial of service via
outputting a crafted PDF file for a DEVN device with gs.
- Fix CVE-2023-38560: An integer overflow flaw was found in
pcl/pl/plfont.c:418 in pl_glyph_name in ghostscript. This issue may
allow a local attacker to cause a denial of service via transforming a
crafted PCL file to PDF format.
https://ghostscript.readthedocs.io/en/gs10.02.0/News.html
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 7dd27cbe5b (support/download: add support to exclude svn
externals) introduced an improperly formatted list item. That was
carried over with bf2d7f8f53 (package/pkg-generic: don't download svn
externals by default).
Fix that.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since 3341ceb1e5 (package/gdb: zlib is mandatory, not optional), zlib
has become a mandatory dependencies of the gdb package.
However, zlib is only needed for the debugger, gdb itself, while the
server, gdbserver, does not use it.
This means that, when building an SDK to be later reused as an external
toolchain, the zlib headers and libraries are present in the sysroot of
the toolchain, tainting the toolchain and making it unsuitable to be
reused.
As Julien noticed, for example, tcl will try and link with zlib if
available, and at build time it is. But at runtime, it is not, and thus
tclsh fails to run; see 7af8dee3a8 (package/tcl: add mandatory
dependency to zlib)
When we only need to build gdbserver, we still need to configure and
build the whole gdb distribution, which means we call the top-level
configure script; that script has no option to disable the detection
of zlib: it wants to either use a system one, or it will build the
bundled one.
So, when we only build gdbserver, we tell configure to not use a system
zlib. This triggers the build of the bundled one, but it is not linked
with gdbserver so in the end it is not used on the target.
Reported-by: Julien Olivain <ju.o@free.fr>
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
HOST_PROG_SHUTDOWN currently references a file that doesn't exist. Fix
by setting it to /usr/libexec/petitboot/bb-kexec-reboot, which this
package already installs but doesn't use.
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Tcl changed its zlib handling in upstream commit [1]. Before this
commit, the HAVE_ZLIB macro was defined only if a zlib headers/library
was found. After that commit, the HAVE_ZLIB macro is unconditionally
defined. The only change is that: if a working zlib library is found
in the toolchain sysroot, it is used. Otherwise, the package will use
a shipped version in [2]. See also [3] and [4].
This tcl commit is included in Buildroot since commit 7fda943b43
"tcl: bump to version 8.6.1".
In Buildroot, we prefer to not use bundled libraries wherever possible,
so add an unconditional dependency to zlib.
Further notes:
This behavior leads to runtime failures, when the package is compiled
with toolchains including zlib in their sysroot. This is because at
configuration time, the package will detect zlib in the sysroot and
link against it, but the library files won't be installed on target.
This happen to be the case with Bootlin toolchains such as [5], as they
also contaions gdbserver, and since 3341ceb1e5 (package/gdb: zlib is
mandatory, not optional), we also build zlib even if only gdbserver is
built (gdbserver does not use zlib, so that's a bug in our gdb
packaging).
This toolchain also happen to be the one used in basic configurations
of the runtime test infrastructure (this issue was found while
attempting to write a runtime test for tcl).
In such cases, running "tclsh" command fails with error message:
tclsh: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
libtcl library also miss its dependency.
ldd /usr/lib/libtcl8.6.so
libz.so.1 => not found
libm.so.6 => /lib/libm.so.6 (0xb6dad000)
libc.so.6 => /lib/libc.so.6 (0xb6c65000)
/lib/ld-linux.so.3 (0xb6f6c000)
[1] https://github.com/tcltk/tcl/commit/6f3dea45cee94f12ffa0b2acbbdb3eedbc01807b
[2] https://github.com/tcltk/tcl/tree/core-8-6-13/compat/zlib
[3] https://github.com/tcltk/tcl/blob/core-8-6-13/unix/configure.in#L172
[4] https://github.com/tcltk/tcl/blob/core-8-6-13/unix/Makefile.in#L240
[5] https://toolchains.bootlin.com/downloads/releases/toolchains/armv5-eabi/tarballs/armv5-eabi--glibc--stable-2023.08-1.tar.bz2
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix CVE-2023-40225: HAProxy through 2.0.32, 2.1.x and 2.2.x through
2.2.30, 2.3.x and 2.4.x through 2.4.23, 2.5.x and 2.6.x before 2.6.15,
2.7.x before 2.7.10, and 2.8.x before 2.8.2 forwards empty
Content-Length headers, violating RFC 9110 section 8.6. In uncommon
cases, an HTTP/1 server behind HAProxy may interpret the payload as an
extra request.
https://www.mail-archive.com/haproxy@formilux.org/msg43864.html
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A flaw was found in LibRaw. A heap-buffer-overflow in raw2image_ex()
caused by a maliciously crafted file may lead to an application crash.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following security issue:
CVE-2023-38039: HTTP headers eat all memory
When curl retrieves an HTTP response, it stores the incoming headers so that
they can be accessed later via the libcurl headers API.
However, curl did not have a limit on the size or quantity of headers it
would accept in a response, allowing a malicious server to stream an endless
series of headers to a client and eventually cause curl to run out of heap
memory.
https://curl.se/docs/CVE-2023-38039.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Mutt 2.2.12 was released on September 9, 2023. This is a bug-fix
release, fixing two crash bugs. One is possible by viewing a crafted
message header, so upgrading is strongly recommended.
Fix CVE-2023-4874: Null pointer dereference when viewing a specially
crafted email in Mutt >1.5.2 <2.2.12
Fix CVE-2023-4875: Null pointer dereference when composing from a
specially crafted draft message in Mutt >1.5.2 <2.2.12
http://www.mutt.org/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop patch and disable libseccomp when building statically to avoid the
following build failure raised since commit
29834d8a12:
src/seccomp_notify.c: In function 'seccomp_notify_plugins_load':
src/seccomp_notify.c:136:42: warning: implicit declaration of function 'dlopen'; did you mean 'popen'? [-Wimplicit-function-declaration]
136 | ctx->plugins[s].handle = dlopen(it, RTLD_NOW);
| ^~~~~~
| popen
src/seccomp_notify.c:136:53: error: 'RTLD_NOW' undeclared (first use in this function)
136 | ctx->plugins[s].handle = dlopen(it, RTLD_NOW);
| ^~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/13d3b46990720bba8621c922b5dce54ab650e96d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Does not install systemd unit if nodm or xdm is enabled.
Signed-off-by: Yanghao Cheng <yanghao.cheng@aioi-atg.com>
[yann.morin.1998@free.fr:
- don't use $(or ...)
- slightly reword comment
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
xdm package also installs a init script that utimately starts X server
Signed-off-by: Yanghao Cheng <yanghao.cheng@aioi-atg.com>
[yann.morin.1998@free.fr:
- don't use $(or ...)
- slightly reword comment
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
tests.package.test_python_pytest.TestPythonPy3Pytest runtime tests fails
now with following error:
======================================================================
FAIL: test_run (tests.package.test_python_pytest.TestPythonPy3Pytest.test_run)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/buildroot/support/testing/tests/package/test_python.py", line 137, in test_run
self.run_sample_scripts()
File "/buildroot/support/testing/tests/package/test_python_pytest.py", line 18, in run_sample_scripts
self.assertRunOk(cmd, timeout=self.timeout)
File "/buildroot/support/testing/infra/basetest.py", line 89, in assertRunOk
self.assertEqual(
AssertionError: 1 != 0 :
Failed to run: python -m pytest sample_python_pytest.py
output was:
Traceback (most recent call last):
File "<frozen runpy>", line 189, in _run_module_as_main
File "<frozen runpy>", line 148, in _get_module_details
File "<frozen runpy>", line 112, in _get_module_details
File "/usr/lib/python3.11/site-packages/pytest/__init__.py", line 5, in <module>
File "/usr/lib/python3.11/site-packages/_pytest/_code/__init__.py", line 2, in <module>
File "/usr/lib/python3.11/site-packages/_pytest/_code/code.py", line 36, in <module>
File "/usr/lib/python3.11/site-packages/pluggy/__init__.py", line 16, in <module>
File "/usr/lib/python3.11/site-packages/pluggy/_manager.py", line 10, in <module>
File "/usr/lib/python3.11/importlib/metadata/__init__.py", line 8, in <module>
File "/usr/lib/python3.11/zipfile.py", line 6, in <module>
ImportError: libz.so.1: cannot open shared object file: No such file or directory
Fix that by adding BR2_PACKAGE_PYTHON3_ZLIB dependency.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Alexander Egorenkov <egorenar-dev@posteo.net>
[yann.morin.1998@free.fr: split long _DEPENDENCIES line]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Improved accuracy of MARK timer, optional, default: 20 minutes.
- Fix sub-second faking of kernel timestamps
- Fix reading kernel logs from /proc/kmsg, regression in v2.4.0.
Only relevant to really old kernels (pre 4.4?) or systems with
static device nodes and no auto-devtmpfs mounting in kernel
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Sync w/ OpenBSD upstream
- Fix key bindings, Home/End
- Fix buffer overflow on no match in i-search
- Fix mark reset
- Usability:
- persistent help in status bar
- F1 toggle quick-help buffer
- F2 save
- F3/F4 macro start/end + run, like GNU Emacs
Full ChangeLog https://github.com/troglobit/mg/releases/tag/v3.7
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- add upstream patch for Unordered available on the Release Page.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
libjxl was failing to build for riscv targets, since commit ff7c37e57
"package/libjxl: security bump to version 0.8.1". Build was failing with
output:
/build/libjxl-0.8.1/lib/jxl/enc_xyb.cc: In function 'jxl::Image3F jxl::N_SCALAR::TransformToLinearRGB(const jxl::Image3F&, const jxl::ColorEncoding&, float, const JxlCmsInterface&, jxl::ThreadPool*)':
/build/libjxl-0.8.1/lib/jxl/enc_xyb.cc:223:21: error: variable 'std::atomic<bool> ok' has initializer but incomplete type
223 | std::atomic<bool> ok{true};
| ^~
This build failure was due to a missing <atomic> header inclusion. For
some reason, the build failure was observed only with RISC-V toolchains.
This commit fixes the issue by adding an upstream commit, not yet in a
package release. See [1].
Fixes:
http://autobuild.buildroot.org/results/121/12107bc7aea7afae1d2fb935d31b44eee6ea1501
[1] https://github.com/libjxl/libjxl/commit/22d12d74e7bc56b09cfb1973aa89ec8d714fa3fc
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
An issue was discovered in lldpd before 1.0.17. By crafting a CDP PDU
packet with specific CDP_TLV_ADDRESSES TLVs, a malicious actor can
remotely force the lldpd daemon to perform an out-of-bounds read on heap
memory. This occurs in cdp_decode in daemon/protocols/cdp.c.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The quoting around the expansion of ${relative_dir} was indeed incorrect
since it was introduced back in 8fe9894f65 (suport/download: fix git
wrapper with submodules on older git versions): it is in fact already
quoted as part of the whole sed expression.
${GIT} can contain more than one item, but we don't care about splitting
on spaces when we just print it for debug, so we can just quote it
rather than add an exception.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit b7efb43e86 (download/git: try to recover from
utterly-broken repositories), we catch errors through an ERR
trap, so we can try and recover from a broken repository. In
that commit, we switched from using "set -e" to "set -E", so
that trap is inherited in functions, command substitutions,
and subshells.
However, the trap is not defined until we have parsed the
options, created the cache directory, and eventually chdir()ed
into it. Athough improbable, it is possible for the git helper
to fail in any of those steps, and that would not get caught.
Fix that
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When we generate the taballs off a local working copy of a VCS tree,
the umask is the one that we enforce in out top-level Makefile.
However, it is possible that a user manually tinkers in said working
copy (e.g. to check an upstream bug fix, or regression). If the user
umask is different from the one Buildroot enfirces, such tinkering
can impact the mode bits of the files, even if their content is not
modified.
When we eventually need to create a tarball from said working copy,
the VCS (e.g. git) will only be interested in checking whether the
content of the files have changed before chcking them out, and will
not look at, and restore/fix the mode bits.
As a consequence, we may create non-reproducible archives.
We fix that by enforcing the mode bits on the files before we create
the tarball: we disable the write and execute bits, and only set the
execute bit if the user execute bit is set.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Several of our patches have been accepted upstream and are included in
elf2flt version 2023.09.
Patch 0001-elf2flt-handle-binutils-2.34.patch is upstream as of commit
c70b9f208979 ("elf2flt: handle binutils >= 2.34").
Patch 0002-elf2flt.ld-reinstate-32-byte-alignment-for-.data-sec.patch is
upstream as of commit 679c94adf27c ("elf2flt.ld: reinstate 32 byte
alignment for .data section").
Patch 0003-elf2flt-add-riscv-64-bits-support.patch is upstream as of
commit c5c8043c4d79 ("elf2flt: add riscv 64-bits support").
Patch 0008-riscv64-add-more-relocations-required-to-be-handled.patch was
squashed into upstream commit c5c8043c4d79 ("elf2flt: add riscv 64-bits
support") during upstreaming.
Patch 0006-xtensa-fix-text-relocations.patch is upstream as of commit
26dfb54a59c8 ("elf2flt: xtensa: fix text relocations").
Patch 0007-elf2flt-remove-use-of-BFD_VMA_FMT.patch is upstream as of
commit a36df7407d9e ("elf2flt: remove use of BFD_VMA_FMT").
Patch 0004-elf2flt-create-a-common-helper-function.patch simply added
a helper function to make the changes in the follow-up patch
0005-elf2flt-fix-fatal-error-regression-on-m68k-xtensa-ri.patch
less intrusive.
Patch 0005-elf2flt-fix-fatal-error-regression-on-m68k-xtensa-ri.patch
is no longer needed as upstream has reverted the commit that necessitated
this patch, see upstream commit 35c692ca4546 ("Revert "elf2flt: fix for
segfault on some ARM ELFs""). The problem that the reverted upstream patch
solved is now instead solved by the combination of upstream commits
7a59b265c2dc ("Revert "elf2flt: fix relocations for read-only data"") and
a934fb42cf59 ("elf2flt: force ARM.exidx section into text").
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-By: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The LuaJIT project switches to a rolling release scheme.
Now, the version contains the timestamp of its latest commit.
The timestamp can be seen in build log:
==== Successfully installed LuaJIT 2.1.1693350652 to /usr ====
diff COPYRIGHT:
-Copyright (C) 2005-2022 Mike Pall. All rights reserved.
+Copyright (C) 2005-2023 Mike Pall. All rights reserved.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If a patch only removes files, it is ignored. Meaning, that the
registered developer isn't automatically picked up when calling
get-developer.
Fix this by also checking if the line starts with ---, as a patch
removing a file has a line starting with --- with the name of the
removed file and one started with +++ /dev/null.
A set is used to store the changed files, which doesn't allow
duplicates. Therefore normal patches aren't affected by this change.
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update github organization name to nxp-imx which is being
redirected to.
Rename COPYING TO LICENSE.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
go1.21.1 (released 2023-09-06) includes four security fixes to the cmd/go,
crypto/tls, and html/template packages, as well as bug fixes to the compiler,
the go command, the linker, the runtime, and the context, crypto/tls,
encoding/gob, encoding/xml, go/types, net/http, os, and path/filepath packages.
Security fixes:
CVE-2023-39320: cmd/go: go.mod toolchain directive allows arbitrary execution
CVE-2023-39318: html/template: improper handling of HTML-like comments within script contexts
CVE-2023-39319: html/template: improper handling of special tags within script contexts
CVE-2023-39321: crypto/tls: panic when processing post-handshake message on QUIC connections
https://go.dev/doc/devel/release#go1.21.0
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This was added both on master and next, but the symbol was also renamed in
next by commit cbd91e89e4 (arch/Config.in.riscv: allow extensions for
generic) and resolved wrong. Ensure we use the new symbol name.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a bugfix release only containing the fix to a potential integer underflow
which got assigned CVE-2023-36328.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
4.1.9 is affected by CVE-2023-36053, and 4.1.10 was released to fix
it. The changes between 4.1.9 and 4.1.10 are just:
f9a14b8f0668029fb7e0aebcae57b60dcec4a529 (tag: 4.1.10) [4.1.x] Bumped version for 4.1.10 release.
beb3f3d55940d9aa7198bf9d424ab74e873aec3d [4.1.x] Fixed CVE-2023-36053 -- Prevented potential ReDoS in EmailValidator and URLValidator.
3b48fe413f91612fb8c43fe9d489860d10c84bf7 [4.1.x] Added stub release notes for 4.1.10 and 3.2.20.
0e5948b8df5d25deb48a505cbf16f010d9dc603c [4.1.x] Fixed MultipleFileFieldTest.test_file_multiple_validation() test if Pillow isn't installed.
66e1e9b006618ba00e804d18bd90d3a9e94801b3 [4.1.x] Added CVE-2023-31047 to security archive.
d1385cc51b142b05b21b721d9d68fc461bc7241f [4.1.x] Post-release version bump.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit updates poppler to the latest version in the 22.x series,
with only has bug fixes. Here is the list of commits between 22.10.0
and 22.12.0:
df568263c51950ceed6f1fb42f80e99a2614c275 (tag: poppler-22.12.0) poppler 22.12.0
198dc1d0674c0a462668e6868c35b1ee0e731005 Form::addFontToDefaultResources: Be stubborn in finding a font we can use
a5952ab70716a2d4f792a943c2dcf3068f1d6885 Revert "CI: Fix Debian brokenness"
8fcaa7c622d24761a9ecb3922f95d072077d6f34 CI: Fix Debian brokenness
cc665f757af6b87dd245d36e079dd44d8d2d2182 (tag: poppler-22.11.0) poppler 22.11.0
a296982e1d5b4968b2bd044d80647ae6f9267526 Do not include a poppler/ file from a splash/ header
bc4a0d9a2abfcd75d9b0ee4be3f7600905fe6001 Form: Provide Unicode marker when ensuring fonts
111f38a722eedddd94faa52dda8c5e0da561fb41 Cairo: Update font after restore
907d05a6a141284aee22fbd16ab0a2fb4e0f2724 Fix crash in file that wants to do huge transparency group
e53f5aae3bce7d09788f2ad62be998895fb9807b PSOutputDev::setupResources: Fix stack overflow in malformed doc
a4ca3a96a6b1f65b335a1ea362e6c202e46ae055 topIdx can't be negative
e471f8e09bf2e38df0cf5df1acecbcca70685573 Init all the fields of JPXStreamPrivate
5190c0d4369bd9f501922585140be4ec736e24f2 No need to store smaskInData in priv
6263bb90b09326103b10e4c4edfbc5b84c884921 Page label ranges can't start in < 0
Note: this version bump does not include the fix for CVE-2023-34872,
so we still need the backported patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libdecor cannot be selected due to a circular dependency:
package/wayland/Config.in:1:error: recursive dependency detected!
package/wayland/Config.in:1: symbol BR2_PACKAGE_WAYLAND is selected by BR2_PACKAGE_LIBDECOR
package/libdecor/Config.in:1: symbol BR2_PACKAGE_LIBDECOR is selected by BR2_PACKAGE_MESA3D_DEMOS
package/mesa3d-demos/Config.in:1: symbol BR2_PACKAGE_MESA3D_DEMOS is selected by BR2_PACKAGE_PIGLIT
package/piglit/Config.in:1: symbol BR2_PACKAGE_PIGLIT depends on BR2_PACKAGE_WAFFLE_SUPPORTS_WAYLAND
package/waffle/Config.in:7: symbol BR2_PACKAGE_WAFFLE_SUPPORTS_WAYLAND depends on BR2_PACKAGE_WAYLAND
Without libdecor, the build fails since the bump of mesa3d-demos to
version 9.0.0 in 80304d9911:
"""
Run-time dependency libdecor-0 found: NO (tried pkgconfig and cmake)
Looking for a fallback subproject for the dependency libdecor-0
../output-1/build/mesa3d-demos-9.0.0/meson.build:88:17: ERROR: Automatic wrap-based subproject downloading is disabled
"""
Fixes:
http://autobuild.buildroot.net/results/8de50be8233f0133aadc26bda71b48d7ec329e04/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Following build failure occurs:
opasswd.c: In function 'compare_password':
opasswd.c:142:3: error: 'retval' undeclared (first use in this function); did you mean 'outval'?
142 | retval = outval != NULL && strcmp(outval, oldpass) == 0;
| ^~~~~~
| outval
Add a patch from upstream to fix it.
Happens since the update to 1.5.3 in Buildroot commit:
f8147e27cd
Fixes:
- http://autobuild.buildroot.net/results/576/576fc4b9ccbc6cff82569692bdec82192e89f036
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cleanup the implementation for reading lines by having files processed
in context managers and utilizing the iterable file object for line
reading (instead of needing to call `readlines()`).
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Notes:
- eglfs/vulkan is only implemented for eglfs_viv
(see stub implementation for QEglFSDeviceIntegration::createPlatformVulkanInstance()
in src/plugins/platforms/eglfs/api/qeglfsdeviceintegration.cpp and
real implementation for QEglFSVivIntegration::createPlatformVulkanInstance()
in src/plugins/platforms/eglfs/deviceintegration/eglfs_viv/qeglfsvivintegration.cpp)
- or for xcb (see QXcbIntegration::createPlatformVulkanInstance()
in src/plugins/platforms/xcb/qxcbintegration.cpp)
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use $(VULKAN_HEADERS_VERSION) for VULKAN_TOOLS_VERSION as the vulkan packages
need to all be the same version.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use $(VULKAN_HEADERS_VERSION) for VULKAN_LOADER_VERSION as the vulkan packages
need to all be the same version.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the license hash as the license file is now located at LICENSE.md
isntead of LICENSE.txt, and add MIT to the list of licenses.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Go 1.21.0 is a major release of Go.
https://go.dev/doc/devel/release#go1.21.0
Set GOTOOLCHAIN=local to disable the new toolchain download feature. This
feature, introduced in Go 1.21.x, will automatically download pre-built compiler
binaries from Google for the toolchain version specified in go.mod. We do not
want this in Buildroot as we build from source instead: set GOTOOLCHAIN=local to
disable the feature and use the locally built toolchain.
https://go.dev/doc/toolchain
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, when verifying the configuration of a uClibc toolchain for
the presence of locale support, we check __UCLIBC_HAS_LOCALE__. It
turns out that we in fact also expect __UCLIBC_HAS_XLOCALE__ to be
defined, as without it locale_t is not defined, causing build failure
in some packages, such as libcpprestsdk:
In file included from /home/thomas/autobuild/instance-0/output-1/build/libcpprestsdk-2.10.18/Release/include/cpprest/json.h:18,
from /home/thomas/autobuild/instance-0/output-1/build/libcpprestsdk-2.10.18/Release/src/pch/stdafx.h:88,
from /home/thomas/autobuild/instance-0/output-1/build/libcpprestsdk-2.10.18/Release/src/http/client/http_client_msg.cpp:13:
/home/thomas/autobuild/instance-0/output-1/build/libcpprestsdk-2.10.18/Release/include/cpprest/asyncrt_utils.h:317:13: error: 'locale_t' does not name a type
317 | typedef locale_t xplat_locale;
| ^~~~~~~~
As essentially our requirement for uClibc in external toolchains is
"it should match the uClibc configuration used by Buildroot for
internal toolchains", it makes sense to verify
__UCLIBC_HAS_XLOCALE__. Note that of course checking
__UCLIBC_HAS_XLOCALE__ is sufficient, as it cannot be enabled if
__UCLIBC_HAS_LOCALE isn't.
This addresses an issue with the Synopsys ARC external toolchain,
which is built with __UCLIBC_HAS_LOCALE__, but without
__UCLIBC_HAS_XLOCALE__ causing a build failure with some
packages (such as libcpprestsdk).
Therefore, this patch also changes how the Synospys ARC external
toolchain is exposed in Buildroot: it no longer advertise locale
support.
Fixes:
http://autobuild.buildroot.org/results/e6778e60cc1ea455f5b4511d5824f04d8040f67b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The intention of this script is to generate the XML that can be sent to
NVD to request a new CPE identifier.
As discussed on the mailing list [0] keeping up with version numbers of
all registered CPE ID won't work.
In addition the feed used to generated the XML files will be retired
[1]. In the future an API needs to be used for fetching the data in
connection with a local database.
All of this works against keeping this script and porting it to the new
API.
As a last blow Matthew, the original author concluded [2]:
> Makes sense to drop it. There never got to be enough momentum in the overall
> software community to make CVE or even the new identifier really accurate.
The intention is to ignore the version part of CPE IDs in the future,
and only look at the version range specified on a CVE. Therefore, a tool
to add new CPE ID versions isn't useful to us. It might still be useful
to have a tool to create the vendor and project parts of a CPE ID.
However, the current gen-missing-cpe tool doesn't support that, and the
API is anyway going to be retired. So there is no reason at all to keep
this around.
Remove gen-missing-cpe and the cpedb module. Remove the Makefile target
to call the script.
Since the cpedb module is removed, the CPEDB_URL definition must be
moved to the place where it is still used, in pkg-stats.
[0]: https://lists.buildroot.org/pipermail/buildroot/2023-August/672620.html
[1]: https://nvd.nist.gov/General/News/change-timeline
[2]: https://lists.buildroot.org/pipermail/buildroot/2023-August/672651.html
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The CVE-2004-2771 is already fixed by the Debian patch
0014-globname-Invoke-wordexp-with-WRDE_NOCMD.patch. The Debian patch
description is:
Subject: [PATCH 4/4] globname: Invoke wordexp with WRDE_NOCMD (CVE-2004-2771)
See also https://marc.info/?l=oss-security&m=141875285203183&w=2 for
more details.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
In commit
15972770cf ("package/heirloom-mailx:
security bump to version 12.5-5 from Debian"), we added CVE-2014-7844
in HEIRLOOM_MAILX_IGNORE_CVES, but with the wrong comment about it: it
is a different patch in the Debian stack of patches that fixes
it. Indeed the description of patch
0011-outof-Introduce-expandaddr-flag.patch is:
=====================================================================
Subject: [PATCH 1/4] outof: Introduce expandaddr flag
Document that address expansion is disabled unless the expandaddr
binary option is set.
This has been assigned CVE-2014-7844 for BSD mailx, but it is not
a vulnerability in Heirloom mailx because this feature was documented.
=====================================================================
See also https://marc.info/?l=oss-security&m=141875285203183&w=2 for
details.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
CVE-2023-31038 affects log4cxx only if ODBC is supported. While
CVE-2023-31038 has been fixed in newer versions of log4cxx, there is
quite a huge gap to do a version bump, and the commit that fixes
CVE-2023-31038 could not be identified.
Therefore, we want to rely on the fact that our log4cxx package does
not support ODBC: there is indeed no explicit dependency on our
unixodbc package in log4cxx.mk. However, log4cxx automatically detects
if ODBC is available and if it is, it uses it.
So what we do in this commit is backport an upstream commit, which
adds explicitly options to enable/disable ODBC and ESMTP support, and
we use them to (1) always disable ODBC and (2) explicitly
enable/disable ESMTP support.
Thanks to ODBC being disabled, we're not affected by CVE-2023-31038.
Of course, there is a potential regression for users who were relying
on the implicit unixodbc dependency, but as we could not identify the
commit fixing the CVE-2023-31038, this is the best we can do at the
moment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit c1038fe47c renamed the patch, but didn't update
.checkpackageignore, leading to two failures:
.checkpackageignore:1055: ignored file package/openjdk/17.0.7+7/0001-Add-ARCv2-ISA-processors-support-to-Zero.patch is missing
package/openjdk/17.0.8+7/0001-Add-ARCv2-ISA-processors-support-to-Zero.patch:0: missing Upstream in the header (http://nightly.buildroot.org/#_additional_patch_documentation)
Rename the file in .checkpackageignore as well.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Grub 2.06 is affected by a number of CVEs, which have been fixed in
the master branch of Grub, but are not yet part of any release (there
is a 2.12-rc1 release, but nothing else between 2.06 and 2.12-rc1).
So this patch backports the relevant fixes for CVE-2022-28736,
CVE-2022-28735, CVE-2021-3695, CVE-2021-3696, CVE-2021-3697,
CVE-2022-28733, CVE-2022-28734, CVE-2022-2601 and CVE-2022-3775.
It should be noted that CVE-2021-3695, CVE-2021-3696, CVE-2021-3697
are not reported as affecting Grub by our CVE matching logic because
the NVD database uses an incorrect CPE ID in those CVEs: it uses
"grub" as the product instead of "grub2" like all other CVEs for
grub. This issue has been reported to the NVD maintainers.
This requires backporting a lot of patches, but jumping from 2.06 to
2.12-rc1 implies getting 592 commits, which is quite a lot.
All Grub test cases are working fine:
https://gitlab.com/tpetazzoni/buildroot/-/pipelines/984500585https://gitlab.com/tpetazzoni/buildroot/-/pipelines/984500679
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Arnout: fix check-package warning in patch 0002]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The pcm-tools package contains a version.h with git attributes:
$ cat version.h
#define PCM_VERSION " ($Format:%ci ID=%h$)"
$ man 5 gitattributes
Creating an archive
export-subst
If the attribute export-subst is set for a file then Git
will expand several placeholders when adding this file to
an archive. The expansion depends on the availability of
a commit ID, i.e., if git-archive(1) has been given a tree
instead of a commit or a tag then no replacement will be
done. The placeholders are the same as those for the option
--pretty=format: of git-log(1), except that they need to be
wrapped like this: $Format:PLACEHOLDERS$ in the file. E.g.
the string $Format:%H$ will be replaced by the commit hash.
So, the archive generated by github has changed since we updated
pcm-tools in 2021-12-08 with commit d1d93d488c (package/pcm-tools:
bump to version 202110). The downlad was still OK in 2022-01-04 [0]
but has been failing at least since 202-08-25 [1].
Since the archive is generated on the github side, there is not much we
can do to fix this up.
We switch over to using git to do the download, and we generate the
archive localy, which we know is reproducible.
We fix the version.h so that it contains the same string as the backup
tarball we host on s.b.o.
There are three other files in pcm-tools that have git attributes, to
exclude them from the generated archive, all pertaining to CI/CD stuff:
.cirrus.yml export-ignore
.gitlab-ci.yml export-ignore
.travis.yml export-ignore
We don't remove them, because they have no impact on the build, and they
are anyway already present in the archive by the time we could act on it
anyway...
[0] http://autobuild.buildroot.org/results/127/1276a3d49c8848039f034e7f03632df365097e94/
[1] http://autobuild.buildroot.org/results/8bb/8bbf9c36af332bbf5e7c1abcbb594a0b231ef97e/
Reported-by: Woody Douglass <wdouglass@carnegierobotics.com>
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Load sample script support/testing/tests/package/sample_nu.nu onto the
target and verify proper execution by nushell
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Nushell is a shell - written in Rust - that makes use of the nushell
language to interact with the operating system
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This fixes a problem with the build system that would make it fail to
use pkg-config to detect libssh2. It worked anyway because -lssh2
works.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update license info. COPYING hash updated because of added reference to
additional licenses. Licenses for local snprintf and getopt
implementations do not apply, since this code is not used for Linux
targets.
Add Tatu Ylonen Permissive license of the code in pseudo.c.
Add LGPL-2.0+ license text file.
Rename BSD-3-Clause text file and update hash because of text formatting
change.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Each time a new pipeline is triggered, some jobs may fail due to
temporary issue with a Gitlab runner (network, power supply, docker or
maintainance).
Most of the problems are "runner system failure" [1] and require to
retart each failed jobs manually by maintainers to complete the
pipeline with only real failures if any.
The "retry" keyword allows to configure how many times a job is retried
if it fails. "retry:when" allows to retry a failed job only on
specific failure types like "runner_system_failure".
While at it, retry a job if it failed due to a timeout failure (this
timeout means that the job was pending for more than 24h) [2].
Such timeout failures occur on pipelines testing each Buildroot's
defconfig since there is not enough gitlab runner available to build
all of them within 24h.
Retry only jobs that are more likely to wait for a runner
(generate-gitlab-ci-yml, runtime_test_base, defconfig_base and test_pkg).
[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/4936949397 (runner system failure)
[2] https://gitlab.com/buildroot.org/buildroot/-/jobs/4936949530 (timeout failure or the job got stuck)
https://docs.gitlab.com/ee/ci/yaml/#retrywhen
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for PineCube with:
- U-Boot 2022.04
- Linux 5.15.61
PineCube is a low-powered, open source IP camera
with the following specs:
- Allwinner S3 Cortex-A7
- 128 MiB DDR3
- 16 MiB SPI flash
- 5 MPx OV5640 camera
- MicroSD slot
- 10/100M Ethernet with passive PoE
- 802.11 b/g/n WiFi
- Bluetooth 4.1
- USB 2.0
- 26 pins GPIO header
- Microphone
- IR LEDs for night vision
Board homepage: https://www.pine64.org/cube/
Board wiki: https://wiki.pine64.org/wiki/PineCube
Signed-off-by: Jan Havran <havran.jan@email.cz>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In Python 3.12, support for 'distutils' is going to be dropped. In
preparation for this, this commit backports an upstream i2c-tools
patch that switches the build logic to 'setuptools', future-proofing
i2c-tools to the upcoming bump to Python 3.12.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop patch which is now upstream.
Replace no longer supported --with-git-submodules config option with
new --disable-download option.
Replace no longer supported --meson config option with --python config
option. The configure script expects --python to point to the python
interpreter with the meson installation.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While switching ATF to github, the BR2_TARGET_UBOOT_CUSTOM_GIT=y
symbol was not removed. Since then this defconfig fail to build
in gitlab-ci due to invalid defconfig check.
WARN: defconfig ./configs/freescale_imx6qsabresd_defconfig can't be used:
Missing: BR2_TARGET_UBOOT_CUSTOM_GIT=y
[1] dd42b159a5
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4889436612
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bugfix release, fixing a number of regressions in 2.0.16
From the changelog
(https://github.com/eclipse/mosquitto/blob/master/ChangeLog.txt)
2.0.17 - 2023-08-22
===================
Broker:
- Fix `max_queued_messages 0` stopping clients from receiving messages.
Closes#2879.
- Fix `max_inflight_messages` not being set correctly. Closes#2876.
Apps:
- Fix `mosquitto_passwd -U` backup file creation. Closes#2873.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bugfix release, fixing a number of regressions in 2.0.16
From the changelog
(https://github.com/eclipse/mosquitto/blob/master/ChangeLog.txt)
2.0.17 - 2023-08-22
===================
Broker:
- Fix `max_queued_messages 0` stopping clients from receiving messages.
Closes#2879.
- Fix `max_inflight_messages` not being set correctly. Closes#2876.
Apps:
- Fix `mosquitto_passwd -U` backup file creation. Closes#2873.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit ee93213d18 (package/check: fix compile issue due to missing
source file), we switched from using the released tarball, to using the
autogenerated tarball from github.
However, that means that the filename of the archive did not change,
while its content did change. The hash was promptly updated, but that
means that the archive we cache on s.b.o (and possibly the one users
may also already have locally) will not match the new hash (and
conversely).
So we switch to using the sha1-hash of the commit corresponding to the
tag.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump qemu_arm_ebbr_defconfig and qemu_aarch64_ebbr_defconfig in sync:
- Bump Linux to v6.4.3
- Bump U-Boot to 2023.07.02
- Bump TF-A to v2.9
While at it, tune the documentation:
- Increase the amount of memory in the example commands to help run the
largest OS distributions.
- Update the link to the IR Guide to point at the latest version.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The docker image currently contains qemu-system-arm and
qemu-system-x86. Each package contains the 32bit and 64bit variants.
This has been sufficient for the time being.
The RISC-V ecosystem is growing rapidly. It is starting to become
mainstream. To increase the diversity in Buildroot runtime tests,
this commit adds the qemu-system-misc package in the Docker image,
in order to have the commands qemu-system-riscv{32,64}. This package
also contains other architectures (for example: microblaze, nios2,
s390x, xtensa, ...).
For Debian package details, see:
https://packages.debian.org/bullseye/qemu-system-misc
Signed-off-by: Julien Olivain <ju.o@free.fr>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For now the "QT libraries and helper libraries" section was only made
visible when BR2_PACKAGE_QT5 was enabled. In preparation for enabling
some of those libraries with Qt6, we now show this section when
BR2_PACKAGE_QT5 || BR2_PACKAGE_QT6.
All of the 8 packages in this section already had a (redundant)
"depends on BR2_PACKAGE_QT5" in their own Config.in file, so the only
functional change of this commit is that the comment "QT libraries and
helper libraries" now becomes visible with Qt6, but it is not followed
by any selectable option. This will be changed in a following commit
enabling one of those libraries with Qt6.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As of upstream commit cbd91e89e4
we can use the default BR2_riscv_g to select IMAFD extensions and
still be able to enable additional extensions, such as the C extension
in our cse.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 0a8ef2f3f7 bumped the headers
version requirements, but did not update the associated comment.
Remove the comment entirely, as it does not apply anymore.
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit 30997eaa65438a2ce726ad8a204ac5a36363f5c8 a mistake
was made. Guard the definition correctly.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit 2423d9f16b (Merge tag '2023.08-rc2' into next), we missed
the fact that util-linux on next is a newer version than on master,
version which includes the patch we backported on master.
Unsurprisingly, that patch no longer applies; drop it.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In commit eb2f2886b2 ("package/swupdate:
add staging install"), the swupdate package was changed to also be
installed in the staging directory, as it provides an API to external
programs, through libraries and headers.
Back then the commit log said:
This patch installs headers and libs to STAGING_DIR, to prevent a
header name collision a subdirectory /usr/include/swupdate creates.
And indeed a custom INCLUDEDIR was specified. However, installing
swupdate headers in /usr/include/swupdate/ doesn't work well, as
progress_ipc.h (installed by swupdate) does a #include
<swupdate_status.h>, which doesn't work as swupdate_status.h is also
in /usr/include/swupdate/ instead of /usr/include/.
To address this Daniel Lang submitted a patch [0], which was proposed
to upstream swupdate to fix this header inclusion. The patch was
rejected by upstream saying that the swupdate header files should be
installed in /usr/include.
Currently, swupdate installs only 3 headers files:
/usr/include/network_ipc.h
/usr/include/swupdate_status.h
/usr/include/progress_ipc.h
To the best of our knowledge, this doesn't conflict with any other
header files installed by other packages. A good proof of that is that
even Debian (which has many more packages than Buildroot) also
installs swupdate headers directly in /usr/include.
In addition, the original submitter of
eb2f2886b2 said "I'm not remember what
was a problem. Probably network_ipc.h but Im not sure now. I think
it's safe to install this headers to /usr/include w/o subdir if this
collision was met only in my environment. PS: currently I don't see
any collisions with this files."
So, we switch to installing swupdate into their standard location.
[0] https://patchwork.ozlabs.org/project/buildroot/patch/VI1P190MB0493D233ECC579510F8C0FC69FB29@VI1P190MB0493.EURP190.PROD.OUTLOOK.COM/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Let's select the RVA option as Andes 45-series CPUs support IMAFDC
extensions.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Buildroot commit 8f1418b5dd bumped the
version of gnupg2 on the next branch causing a build error:
server.c:(.text+0xbf8): undefined reference to `ks_ldap_help_variables'
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 0e19425c77 ("package/libassuan: bump to version 2.5.6") moved
the sha256 hash below a link that provides the hash directly. The key
check comment now appears to refer to license hashes, which does not
make sense.
Remove the redundant key check comment.
Cc: Julien Olivain <ju.o@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Certain TI K3 devices such as AM62x and AM62Ax require a Device Manager
(DM) firmnware to be made available to the U-Boot build, which will get
packaged into the "tispl.bin" image tree blob during A53 SPL build.
Without that DM firmware U-Boot will not be functional. To support this,
add a config option called BR2_TARGET_UBOOT_NEEDS_TI_K3_DM to enable
this feature, and another option BR2_TARGET_UBOOT_TI_K3_DM_SOC to allow
setting the name of the SOC which needs to match the corresponding
folder name in the ti-linux-firmware Git repository.
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The TI K3 R5 loader package essentially is a wrapper to build a special
version of U-boot SPL used as part of a multi-stage boot flow on TI K3
devices, and as such needs full flexibility as to specifying the U-Boot
sources used for the build. To accomodate this, add the same options as
already available in the regular U-Boot package. For most use cases, the
same source settings (repo URL, versions, etc.) should be used for both
ti-k3-r5-loader and uboot packages.
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes CVE-2023-34241 (see [0] for details)
[0] https://github.com/OpenPrinting/cups/releases/tag/v2.4.6
The number of changes between 2.4.4 and 2.4.6 is really small, and
limited to bug fixes:
9d614a4b3184205294c55355a1d2eb54d4532ccd (tag: v2.4.6) Update CHANGES.md
6f6da74ec284e28c156f0b9f62f3bd610e61aa78 Fix use-after-free in cupsdAcceptClient() (fixes CVE-2023-34241)
3f12185ca9cbb5350a6370d6046066907b8abc12 Merge pull request #735 from AtariDreams/Fixer
f5281777c80cdf820a2a71c9e7f08b91f0e11160 Fix compilation on older macOS versions
ee82c5b18409def3ec1424ce2eb343aabb0ff0d1 Merge pull request #730 from zdohnal/cupssinglefile_24x
1504527b2415a4b67b0e3e17593b053f3628746f cups/ppd-cache.c: Put cupsSingleFile into generated PPD
3be1d5da8fe9ee13aab5ee6ecc11b2f9387821a6 Prepare files for next release
c1f54ec966ccc5d5564eed95dcb540842af7b5ca (tag: v2.4.5) cups/cups.h: Update for 2.4.5
70dba05b7511a96476ea0ef8fe1d92c6500c6e61 Finish hotfix release 2.4.5
87f5cb7d8f0da8fa2835bb0aa3ca48b5e5a66a3f Merge pull request #727 from AtariDreams/hotfix
61aa0b259183fe59124566f08ecf649bb806cd24 Regression: Certificate data is corrupted during base64 conversion
7362f41c45d834564f876ffac536f59eece843ec Prepare files for next release
Signed-off-by: Clement Ramirez <ramirez.clement3@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The hss-payload-generator cannot find where u-boot.bin is when looking
for it using the config.yaml. Update syntax issues and working
directories. Fix the post image script to allow an image to get built.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
By default, when Busybox is enabled, it uses the
package/busybox/busybox.config configuration file, even on noMMU
configurations. As this default configuration enables the 'ash' shell
which isn't available for noMMU targets, Busybox falls back to
enabling the 'hush' shell, but without enabling a number of its
sub-options that are quite relevant. In particular, it doesn't enable
umask, which is used in our startup scripts.
In order to have a default configuration that is more sensible, this
commit changes the Busybox package to use
package/busybox/busybox-minimal.config by default for noMMU
configurations.
Signed-off-by: Jesse Taube <Mr-Bossman075@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Enclosure LED Utilities
ledmon and ledctl are userspace tools designed to control storage
enclosure LEDs. The user must have root privileges to use these tools.
These tools use the SGPIO and SES-2 protocols to monitor and control LEDs.
They been verified to work with Intel(R) storage controllers (i.e. the
Intel(R) AHCI controller) and have not been tested with storage controllers of
other vendors (especially SAS/SCSI controllers).
For backplane enclosures attached to ISCI controllers, support is limited to
Intel(R) Intelligent Backplanes.
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 2a5d90a595 (configs/rock5b: Add patches to fix gcc12 warnings)
introduced the kernel patches in an incorrect directory.
Fix that by moving them in the proper location.
Reported-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since it was introduced in 5a6087d62e (toolchain: add powerpc SPE ABI
support), the CLASSIC vs. SPE choice for the ABI was never really a
choice: CPU without SPE could only use the CLASSIC ABI, while CPUs with
SPE could only use the SPE ABI.
Commit b4c824562b (powerpc: add BR2_POWERPC_CPU_HAS_SPE to replace
adhoc deps/checks) added a blind option that CPUs with SPE would select
rather than duplicate the ad-hoc dependencies in both CLASSIC and SPE
ABI options. Since then, it was even more obvious that the ABI choice
was really not a choice, as the two options have mutually exclusive
conditions.
Drop the useless choice, and directly use the blind option as selected
by the specific CPUs.
We don't need legacy handling, because the situation fixes itself.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Other packages, or rootfs overlays, may install certificates, so only
create the certificate bundle as a target-finalize hook.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch introduces patches for the custom kernel, as it is
currently used for the Radxa Rock 5B. The patches fix two gcc
compiler warnings, which result in a build error, if the kernel
is used with gcc version 12.
Since also the code of custom board drivers for WiFi support is
affected, and no fixes are provided by the vendor, the custom WiFi
support is disabled.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 7dd27cbe5b (support/download: add support to exclude svn
externals) departed from the usual opt-in scheme, like is done for
git submodule or large files, in an attempt to keep the previous
behaviour unchanged, that is to download externals by default.
As an afterthought, we've concluded that the chances for svn-hosted
packages with externals that are indeed required to do the build,
are relatively slim. For those cases, it even makes sense to explicitly
requested the use of the externals.
So, we change the default to not download svn externals.
Since the generated archives may change, we bump the version suffix.
This will allow users to more easily catch the situation and decide if
they really need the externals or not.
We have a single in-tree package that uses svn, and it does not use
externals, so the generated archive does not change, and we just need
to update the archive filename in the hash file.
Finally, we add a new section to the manual, in the chapter about
migrating Buildroot to a newer version.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
It is sometimes useful to use docker-run, but with a different image
than the default one. This commit allows to override the image being
used by only defining IMAGE if not already passed in the environment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: s/\t/ /g]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
After switching to a fresh Fedora 38 installation with SELinux disabled,
we noticed that utils/docker-run doesn't work as the applications
running inside the container are not allowed to accept the data mounted
through the bind mount.
Since we do not really need to isolate and confine the build, but rather
to provide a known environment, we don;t really need to enforce any
SELinux confinment in the container.
So, we tell docker to turn off label confinement for the container:
https://manpages.org/docker-run
--security-opt=[]
Security Options
[...]
"label=disable" : Turn off label confinement for the container
Suggested-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: use Antoine's proposal]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, using utils/docker-run expects that the current working
directory is the working copy. This means that it is not possible
to use docker-run with an out-of-tree build (one using O=).
Add the current working directory to the list of mountpoints, and
use that as working directory in the container.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If buildroot is checked out as part of a 'repo' manifest, docker-run
doesn't fully bind mount the .git directory, leading to commands such
as `utils/docker-run make check-package` to fail.
Signed-off-by: Nicolas Boichat <drinkcat@google.com>
[yann.morin.1998@free.fr: use newly introduced mountpoints list]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If the user has defined $BR2_DL_DIR in the environment, it would be
nice to have it accessible inside the Docker container, and the
BR2_DL_DIR environment variable set to access it.
This commit does exactly this: it mounts the host $BR2_DL_DIR as /dl
in the container, and sets BR2_DL_DIR=/dl in the container.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: use the new mountpoints list]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
For now, we only ever mount two mountpoints, the main directory (i.e.
the working copy), and the git directory.
To pave the way for adding new mountpoints, we introduce a list of them,
that we sort to ensure that we never mount a shallower mounpoint after a
deeper one (that would shadow the deeper mountpoint).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit
b86adfb89a ("configs/roc_rk3399_pc: new
defconfig") introduced a new defconfig with the relevant entries in
the DEVELOPERS file, but one of these entries points to a non-existing
directory. This commit fixes that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is the follow-up commit to the 4de60e4 which disables
sourcehighlight dependency for the target GDB package.
Do the same for the host variant to be sure that this
won't be picked up from the host system.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
nftables provides python bindings; it uses setuptools to install them.
We currently install those bindings by telling the nftables buildsystem,
autotools, to install the python bindings.
However, we do not pass any of the environment variables that are needed
for setuptools packages. When host-python-setuptools is installed before
nftables is built [0], this breaks the system at runtime, as the
bindings are not installed; only the egg is, resulting in runtime errors
like:
# python -c 'import nftables'
Traceback (most recent call last):
File "<string>", line 1, in <module>
ModuleNotFoundError: No module named 'nftables'
Upstream has been doing some changes on their python handling, but it is
not in a released version yet, and we can't backport those changes
either, due to other big changes.
Instead, we split the pyhon bindings to their own package.
For legacy handling, we make that new package default to y, so that
existing (def)config still work. The only novelty is that it can be
disabled now.
Many thanks to Julien for testing and finding the offending dependency,
to James for suggesting the package split, and to Adam for, well,
trigerring the issue in the first place! ;-p
Note: a git bisect of the issue turns up 72 candidates for the breakage,
all around the time we dropped python2 support in early 2022; the last
known-good commit is 55df30f8b1 (package/zfs: drop python2 support)
and the first known-bad commit is 697acda00d (package/pkg-python: drop
python2 host/setuptools support); everything in-between does not
configure (package/python/Config.in.host still sourced but already
removed), or does not build (host-python still in the dependency chain
but already removed), so had to be skipped during the bisect.
[0] This can happen when another python package using setuptools is
built before nftables. However, with PPD, this never happens because
host-python-setuptools is never in the dependency chain of nftables.
Reported-by: Julien Olivain <ju.o@free.fr>
Tested-by: Julien Olivain <ju.o@free.fr>
Suggested-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Adam Duskett <aduskett@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues:
- CVE-2023-28366: Fix memory leak in broker when clients send multiple QoS 2
messages with the same message ID, but then never respond to the PUBREC
commands.
- CVE-2023-0809: Fix excessive memory being allocated based on malicious
initial packets that are not CONNECT packets.
- CVE-2023-3592: Fix memory leak when clients send v5 CONNECT packets with a
will message that contains invalid property types.
- Broker will now reject Will messages that attempt to publish to $CONTROL/.
- Broker now validates usernames provided in a TLS certificate or TLS-PSK
identity are valid UTF-8.
- Fix potential crash when loading invalid persistence file.
- Library will no longer allow single level wildcard certificates, e.g. *.com
For more details, see the changelog:
https://mosquitto.org/ChangeLog.txt
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now that we build the full host-gettext-gnu, we don't need the
standalone libtextstyle anymore.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
[yann.morin.1998@free.fr: split off to its own commit]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The bump to meson 1.2.0 triggers unexpected build failure of the host
packages, because meson changed the way it passes library search paths
when building natively:
https://github.com/mesonbuild/meson/commit/59cfbf68e00aa774a9868101f423bd662938c15dhttp://lists.busybox.net/pipermail/buildroot/2023-August/672649.html
As a consequence, the libraries are searched for in the system paths
before being searched in our host-dir, leading to failures when
incompatible libraries are installed in both locations. For example, if
the system has an older version of libglib2 installed, this causes link
failures when one of the glib2 library (e.g. libgio) is linked by path,
but a dependent library (e.g. libgmodule) is linked by name:
/path/to/host/lib/libgio-2.0.so -L /path/to/host/lib/ -lgmodule-2.0
The first is indeed the one we built and installed in host-dir, but the
second is found in the system path; when it is an older (or more
recent?) version than the one we use, the link fails;
/path/to/host/lib/libgio-2.0.so: undefined reference to `g_module_open_full'
Since fixing the issue is not trivial, revert to the previous meson
version that did not exhibit the issue.
This reverts commit d06e610d58.
Reported-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update the instruction sets for MPFS icicle kit to mirror the
configuration update, i.e. It is now classed as a RISC-V G core with
support for C, IMAFDC.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The generic extension set 'G' is realy a base with the minimal set of
extensions needed to be comfortable (but not required) to run a
linux-bassed system. Similarly, we consider the custom to be about the
custom set of features (not about a custom core implementing such a
set).
As such, we allow that a core with the G set can have futher extensions
without requiring it to be configured as a custom set.
We drop the intermediate symbols with the prompts, and move the prompts
to the previously hidden symbols, and add a prompt for the I set.
This alows one to clearly see what the generic set is about, without
having to delve into the help and hunt the list of selected symbol.
Note however that the G set implies Zicsr and Zifencei, but we have no
prompt for thos two, because in Buildroot, we assume that they are
mandatory and always present, like the I set (which they previously were
part of).
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
[yann.morin.1998@free.fr:
- drop the intermediate symbols
- move prompt to previously hidden symbols
- add symbol for I
- update defconfigs
- reword the commit log accordingly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit e3322e2c7 "lsof: add license info" added the package license
info. At that time, lsof was at version 4.85. The package was not
including a dedicated license file. Instead, the license text was
copied in many files (source files, readmes, ...). It was then decided
to use the small source file "dialects/linux/dproto.h".
Recently, lsof added a COPYING license file. See [1]. This commit was
first included in lsof version 4.97.0. We can now use this file.
The license file hash is updated due to formatting changes. As a side
note, the copyright year in source file was 1997 (see [2]), whereas in
the new license file it is 2002. Source files have different copyright
dates, and can be as old as 1994, for example in [3]. The rest of the
license text remains unchanged.
[1] https://github.com/lsof-org/lsof/commit/62dab61cae3ca9e4d41ec573ae5cda0c5689c326
[2] https://github.com/lsof-org/lsof/blob/4.98.0/dialects/linux/dproto.h#L9
[3] https://github.com/lsof-org/lsof/blob/4.98.0/arg.c#L7
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The compiler-rt project intructs to build out of tree:
https://compiler-rt.llvm.org/
Otherwise, the dependency chain declared in the include/CMakelLists.txt
causes a circular dependency of source files upon themselves:
make[4]: Circular include/sanitizer/allocator_interface.h <- include/sanitizer/allocator_interface.h dependency dropped.
make[4]: Circular include/sanitizer/asan_interface.h <- include/sanitizer/asan_interface.h dependency dropped.
make[4]: Circular include/sanitizer/common_interface_defs.h <- include/sanitizer/common_interface_defs.h dependency dropped.
[--snip 19 other files--]
This is because include/CMakeLists.txt unconctional declares
dependencies in this manner:
set(SANITIZER_HEADERS
sanitizer/allocator_interface.h
sanitizer/asan_interface.h
sanitizer/common_interface_defs.h
[...]
)
set(COMPILER_RT_HEADERS
${SANITIZER_HEADERS}
[...])
set(output_dir ${COMPILER_RT_OUTPUT_DIR}/include)
foreach( f ${COMPILER_RT_HEADERS} )
set( src ${CMAKE_CURRENT_SOURCE_DIR}/${f} )
set( dst ${output_dir}/${f} )
add_custom_command(OUTPUT ${dst}
[...]
)
[...]
endforeach( f )
The froeach() loop creates dependency rules between the files in
output_dir and CMAKE_CURRENT_SOURCE_DIR, without provision for the
case they are both the same directories, thus in-source builds are
not supported.
With the Makefiles backend, this only triggers the above warning
from make, because make arbitrarily breaks circluar dependencies, and
in this case it makes it work. But when we switch to the ninja backend,
this is going to be a hard error.
Anyway, ninja or make, compiler-rt does not support in-source builds.
Signed-off-by: Thomas Devoogdt <thomas@devoogdt.com>
[yann.morin.1998@free.fr: drastically expand commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since it was iontroduced in commit d4ecefa3cc (package/perftest: new
package), perftest was missing the reverse dependency on the kernel
headers version inherited from rdma-core.
In commit 3279d8b9c4 (package/rdma-core: needs NPTL), the dependency
of rdma-core on NTPL was not propagated to its reverse dependencies,
notably perftests.
Fixes:
- http://autobuild.buildroot.net/results/00c/00ce19a1589c6028ee77c333ed9107e2c8c8d6de
- d4ecefa3cc
- 3279d8b9c4
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[yann.morin.1998@free.fr:
- also add misisng headers dependency
- expand commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Firewalld provides a dynamically managed firewall with
support for network or firewall zones to define the trust level of network
connections or interfaces.
Items of note:
- Setting PYTHON="/usr/bin/env python$(PYTHON3_VERSION_MAJOR)" prevents
Firewalld from setting the shebang in the installed python files to the
full path to the python interpreter used when building.
- The bundled provided SYSV init file has several bashisms and requires
/etc/init.d/functions which buildroot doesn't provide. So instead, a more
simple init.d file is provided in the package directory, which does not
require bash.
- Firewalld >= 1.0.0 requires a linux kernel version of 5.3 or later.
Because Buildroot does not have a mechanism to detect what version a user
is compiling if the kernel is external, there is no way to prevent a user
with an external kernel older than 5.3 to select this package.
- To run, Firewalld requires enabling almost every single nftables option in
the kernel menuconfig. Indeed for a regular user, this task is quite a
time-consuming operation, and missing even one required nftables option
results in firewalld failing to start.
Through a mix of trial and error and talking to the upstream developers,
the package selects the minimum amount of kernel options required for
runtime. Understandably the list is daunting. However, these options
have passed run-time tests with kernel 5.3 (the minimum kernel version
required) and kernel 6.2.10 (the latest kernel version as of this commit
log.)
As such, it is safe to say these options will work for anybody wanting to
use firewalld with a supported kernel version of 5.3 or higher.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Thomas:
- select python3 instead of depending on it
- fixup Config.in comment
- rely on NLS support by autotools-package]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Previously, gen-bootlin-toolchains did not add a `depends` guard to
limit the available toolchains based on the minimum required GCC version
for the user selected CPU tuning.
Now, the proper BR2_ARCH_NEEDS_GCC_AT_LEAST_X guard will be added based
on the version of GCC provided by the toolchain.
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
[yann.morin.1998@free.fr: regenerate the toolchain list]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Previously, it was possible to select an external toolchain that did not
support the GCC arch tuning the user had selected. This is problematic
because it can lead to confusing error messages during builds [0].
Now, external toolchain selections will be filtered to only those that
support the required GCC version specified by the target arch tuning.
Note: this patch does not touch the Bootlin toolchain config file as it
is generated by a script.
Additional note: there is "soft" support for toolchains prior to GCC 4.8
but there are no accompanying BR2_ARCH_NEEDS_GCC_AT_LEAST_X symbols.
Instead of adding those, just use BR2_ARCH_NEEDS_GCC_AT_LEAST_4_8 which
is the minimum GCC version with claimed support [1].
[0]: https://lists.buildroot.org/pipermail/buildroot/2023-August/671877.html
[1]: https://buildroot.org/downloads/manual/manual.html#requirement-mandatory
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The upstream QEMU 'sifive_u' machine supports running upstream U-Boot
for the SiFive HiFive Unleashed board out of the box.
Add the QEMU instructions for testing in readme.txt.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As the rootfs size is set to 60M, let's put it right on the 4M offset
in the SD card, so that the generated sdcard.img can be exactly
64M. This will allow sdcard.img to be accepted as an image by Qemu,
which requires power of two sizes for the disk images.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A new version of Bootlin toolchains, 2023.08, has been recently
released. Besides the usual updates of GCC, binutils, GDB, kernel
headers, and C libraries, support for AArch64 BE with musl has been
enabled, which explains why there are two new toolchains and two new
test cases.
All test cases where successfully tested:
https://gitlab.com/tpetazzoni/buildroot/-/pipelines/957304450/builds
Note that the sparcv8 uClibc toolchains are considered obsolete. They
are still available, but at some point we'll have to drop them from the
choice.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We now have 3 different options to select an image as the BL33 stage
of TF-A: Barebox, U-Boot or EDK2. Technically speaking, they are
mutually exclusive: they all specify a BL33= variable to the TF-A
build, and TF-A can only support a single BL33 stage.
However, as pointed out by Vincent Fazio in [0] there is nothing that
prevents selecting Barebox, U-Boot and EDK2 together, even though it
doesn't make sense.
To address this, this commit introduces a choice...endchoice block,
into which the Barebox, U-Boot and EDK2 options are moved. An
additional "none" option is added, which is the default, and
corresponds to not having any BL33 image.
Since we keep the same name for the options, no legacy handling is
necessary.
[0] https://lore.kernel.org/buildroot/PH1P110MB1603A4AA1638838DA56BAA069FDA9@PH1P110MB1603.NAMP110.PROD.OUTLOOK.COM/
Reported-by: Vincent Fazio <vfazio@xes-inc.com>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Cc: Casey Reeves <casey@xogium.me>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Vincent Fazio <vfazio@xes-inc.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The issue seems to be fixed. I checked qemu and linux git repositories
but can not find any information when this is starting to work.
System gets successfully an IP, no further testing was done.
Tested with Qemu 8.0.3 and Linux 6.1.x.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use full relative pathes for rootfs and kernel, like in other
readme's.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This test is a followup of the discussion at:
https://lists.buildroot.org/pipermail/buildroot/2023-July/671639.html
It provides an example of a runtime tests using standard Linux graphic
components (Kernel, DRM, Mesa3D, weston).
Signed-off-by: Julien Olivain <ju.o@free.fr>
[yann.morin.1998@free.fr:
- use an overlay rather than create config file at runtime
- sleep in python not in target
- increase delay to capture DRI CRCs
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
commit "package/weston: fix the configuration of simple-clients"
fixed the configuration of Weston simple-clients by always enabling all
supported applications.
Since it is not desirable to always have all those applications
installed on target, this commit introduces a new package Kconfig
option to control this.
Since there is already a BR2_PACKAGE_WESTON_DEMO_CLIENTS option present,
this commit also update the Kconfig "help" entries, to clarify the
difference between those "demo clients" and "simple clients". Those
clients groups are directly coming from the upstream package (and are
directly mapped to Meson configure options).
Signed-off-by: Julien Olivain <ju.o@free.fr>
[yann.morin.1998@free.fr:
- set -Dsimple-clients= only once, outside conditional block
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
commit 7329a0db44
"weston: disable v4l simple dmabuf for headers < 3.8"
disabled dmabuf-v4l-client when kernel headers are older than v3.8.
This commit was made at the time the weston package was at version
1.10.0, using the autotools package infra.
commit e672eb5c39
"package/weston: bump to version 8.0.0"
replaced the package infra to meson (since upstream deprecated
autotools). This commit changed a disable of dmabuf-v4l-client in
autotools, by enabling it only if supported. The end result is that
the current meson package recipe disable ALL simple clients, or just
enable dmabuf-v4l-client when supported. In all cases, all other
weston simple clients are disabled. This behavior is not convenient
since some of those simple clients are useful to test the correct
operation of Weston and the rest of the graphic stack.
This commit fixes this issue by enabling all supported simple clients.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 21d5d592a4 (package/fft_eval: new package) got last-minute
changes when comitted, changes which no longer made use of the
FFT_EVAL_TARGETS variable, but forgot to drop assignments to that
variable.
Drop them now.
Reported-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Compile of e2fsprogs is failing because of gcc bug
111001. Workaround it by forcing the usage of -Os.
Compile fails with:
CC rw_bitmaps.c
terminate called after throwing an instance of 'std::bad_alloc'
what(): std::bad_alloc
during RTL pass: sh_treg_combine2
rw_bitmaps.c: In function 'read_bitmaps_range_start':
rw_bitmaps.c:447:1: internal compiler error: Aborted
447 | }
| ^
0x5e7a6f ???
../sysdeps/aarch64/start.S:81
Please submit a full bug report, with preprocessed source (by using -freport-bug).
Please include the complete backtrace with any bug report.
See <http://bugs.buildroot.net/> for instructions.
No need to backport, because gcc 13.2.0 was introduced recently in
Buildroot commit: 3009095ba8
Fixes:
- http://autobuild.buildroot.net/results/fb7/fb7e9c8b02b979b3a75185c0afa4ab0ca654f6f6
- http://autobuild.buildroot.net/results/659/659313b1783db491653bcc85b37da40c7b077225
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
e2fsprogs package fails to build for the SH4 architecture due to a gcc
13.2.0 bug that leads to:
during RTL pass: sh_treg_combine2
rw_bitmaps.c: In function read_bitmaps_range_start:
internal compiler error: Aborted
Let's add gcc bug to avoid to deal with architectures in packages
when a gcc bug arises. Let's instead deal directly with gcc
bug number.
It's been reported upstream:
https://gcc.gnu.org/bugzilla//show_bug.cgi?id=111001
No need to backport as gcc 13.20 was introduced recently in
buildroot.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The dependency is not provided by Buildroot, and it can potentially be
found by gdb's build system from the host system, which results in the
following build errors:
../../gdb/source-cache.c:37:10: fatal error: srchilite/sourcehighlight.h: No such file or directory
37 | #include <srchilite/sourcehighlight.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[4]: *** [Makefile:1645: source-cache.o] Error 1
make[4]: *** Waiting for unfinished jobs....
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
screenfetch requires an "awk" implementation, but upstream would
only use an executable called "awk": pick up upstream patch that
can autodetect awk implementation, so that "mawk" can be used.
Signed-off-by: Nicolas Boichat <drinkcat@google.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Most of the users use HDMI console on RPi and with increasing popularity
of systemd they face a trouble.
systemd doesn't use /etc/inittab, enable getty@tty1.service instead.
Signed-off-by: Alexey Roslyakov <alexey.roslyakov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In Buildroot commit cc69dbf8fd
("package/libedit: bump version to 20221030-3.1"), the version of
libedit was bumped from 20210910-3.1 to 20221030-3.1. This broke the
build with uClibc:
./sys.h:96:1: error: unknown type name 'ssize_t'; did you mean 'size_t'?
Header file uses ssize_t so sys/types.h must be included.
This commit adds a patch that fixes this issue.
Fixes:
http://autobuild.buildroot.net/results/439538b23776a58ff81c38754a19ee92c3590a1f
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit "f6fe8932df pkg-generic: add checks on deprecated variables
FOO_BAR_OPT" introduced checks for deprecated variables, and warns the
user to use _INSTALL_HOST_OPTS instead of _INSTALL_HOST_OPT.
Commit "6a25cec33d package/pkg-cmake.mk: rename _INSTALL_HOST_OPTS ->
_INSTALL_OPTS" removed the usage of _INSTALL_HOST_OPTS but didn't add a
check for the deprecated variable.
Add a warning to change _INSTALL_HOST_OPTS to _INSTALL_OPTS.
And change the warning for _INSTALL_HOST_OPT to also suggest
_INSTALL_OPTS.
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The note above the erlang version instructs to refer to another note
further down the file. However, even if it is not too difficult to find,
it is still located a bit too far away, and the reference is not very
explicit what note we should look at.
When we introduced that variable in 6c1d128844 (package/erlang: export
EI_VSN so other packages can use it), the rationale for hard-coding it
was "to avoid spawning a shell every time the variable is dereferenced".
However, that can get a bit confusing and hard to follow. Also, that in
fact spawns a shell only once for each rebar-packages, so the overhead
is far from being too high.
The EI_VSN is only used by rebar-package packages, is derefrenced from
the rebar-infra and not the packages themselves, and is not needed by
erlang itself (it knows its own EI_VSN), so we can de-hard-code it, and
rely on build-time detection, by looking in the appropriate file.
We have two files where we could look:
- lib/erl_interface/vsn.mk in the erlang source tree, but it is not
installed,
- .../lib/erlang/releases/$(ERLANG_RELASE)/installed_application_versions
as installed by erlang.
We use the second one, as it is cleaner, for a package, to look into
installed files, rather than to look in the source tree of another
package.
Although both the host and target erlang are the same, we still look
into the corresponding file to extract the version. This is so that it
would be easier if in the future we ever manage to rely on a
system-installed erlang that could have a EI_VSN different from the
target one.
We can't re-use the variable ERLANG_EI_VSN, because it now needs to be
$(call)-ed with a parameter. Hopefully, external packages that use it
directly rather than through the rebar infra, are not legion...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Will Newton <will.newton@gmail.com>
Cc: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update linux-3.14.config for Galileo to enable Linux kernel root
file system on NFS.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for MIPS IV was dropped in commit
dd45fe0efb ("arch/mips: remove
deprecated mips1/2/3/4 support"). However, even though it is an older
ISA than R1, it is still useful to support older MIPS-based
systems (e.g.: Cobalt Qube).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This version makes it explicit that it uses libxdiff, a library which is
not maintained upstream since 2008. It now have numerous forks, none of
them sticking out. For now, use the one which is bundled in the libgit2
sources.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add patch taken from upstream pull request ([1]) to fix gcc-13.x compile
failure because of a missing csdtint include.
Fixes:
In file included from libserial/SerialStreamBuf.h:36,
from SerialStreamBuf.cpp:34:
./libserial/SerialPortConstants.h:93:37: error: ‘uint8_t’ was not declared in this scope
93 | using DataBuffer = std::vector<uint8_t> ;
| ^~~~~~~
[1] https://github.com/crayzeewulf/libserial/pull/186
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- update to latest git version
- switch to https url for better access for users behind a proxy
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for m68k with MMU in musl was added in 2018 with
commit f81e44a0d96c88e052e51982f9fdd6fe0a212b46.
Tested with qemu_m68k_q800_defconfig.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 503252d8b0 (boot/lpc32xxcdl: remove package) forgot to remove
the special handling in genrandconfig. Since the package no longer
exists, we don't need to special-case its symbol anymore, so drop it
now.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This package has dubious licensing conditions (not even documented in
the .mk file), and is a bootloader for very old platforms. The
defconfigs making use of it have been removed in Buildroot in 2014, in
commit c6a410964b ("configs: remove
lpc32xx defconfigs"), so let's get rid of the package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[yann.morin.1998@free.fr: remove reference in test]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds a new defconfig for OrangePI PC2 board.
It was supported before in Buildroot, however due to problems in
building TF-A, it was removed in commit
eeede611f8. This commit re-adds it, in a
state that properly builds.
Signed-off-by: Javad Rahimi <javad321javad@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Newer versions of Google's Material Design icon package are structured
differently, making a version bump no so trivial. While work can be done
to support this, considering this package is using v2.2.3 and the most
recent version is v4.0, it is most likely that this package is not being
used. Environments which desire Material icons/fonts/etc. will most
likely achieve better results be managing their own custom package to
have an explicit selection/filter of design styles (e.g. standard,
Android, etc.), variants (basic, outlined, rounds, etc.), display
resolutions and scale selection desired.
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Until now, the Python build system was building a _dbm.cpython-*.so
native module when BR2_PACKAGE_PYTHON3_BERKELEYDB was enabled, but
since the bump of Python to 3.11.x, it was no longer building this
native module.
Investigation this, we found out that Python 3.11 changed how libdb
was detected [1] and that check now fails:
quoting configure log:
checking for libdb... no
quoting python config.log:
conftest.c:(.text.startup+0x8): undefined reference to `__db_ndbm_open'
However, in fact it turns that this problem is not new in Python
3.11. In Python 3.10, the build system was always producing the native
module, but it was in fact not working at runtime:
>>> from _dbm import *
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: /usr/lib/python3.10/lib-dynload/_dbm.cpython-310-arm-linux-gnueabihf.so: undefined symbol: __db_ndbm_delete
It was not really visible because when one does "import dbm", it
actually tries several "backends", including ndbm (which relies on
_dbm above), and if it doesn't work, it falls back silently on a pure
Python implementation.
So the issue was never noticed, but has already been there,
potentially forever.
In order for this _dbm native module to be built (Python >= 3.11) or
to work (Python < 3.11), the BerkeleyDB library need to be built with
its so-called "dbm" interface, which we do by selecting select
BR2_PACKAGE_BERKELEYDB_DBM.
And now:
>>> import _dbm
>>>
[1] https://github.com/python/cpython/blob/d2340ef25721b6a72d45d4508c672c4be38c67d3/configure.ac#L4002
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
[Thomas: did more research to have a better explanation of what is
happening, and realize the problem is not related to Python 3.11]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for the icicle kit, the main development board for
Microchip's PolarFire SoC.
The configuration file is microchip_mpfs_icicle_defconfig. It builds a
bootable kernel image with an embedded root file system. The image
built can be flashed to the board using the eMMC or an SD card.
The yaml configuration file is used by the hss payload generator. It
maps the ELF binaries or binary blobs to the individual application
harts (U54s).
The image generator script sets the partitions of the image.
The kernel fragment file sets additional configurations for the icicle
kit in buildroot that are not in the default configuration.
The image tree souce file creates a FIT image.
The post image script creates the payload using the payload generator
host package and finally, creates the FIT image using the ITS after the
kernel build.
The U-Boot script and additional U-Boot configurations ensure that
U-Boot behaves as expected for the icicle kit and boots the FIT image.
The readme.txt file documents how to build and boot the icicle kit with
this configuration.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Buildroot icicle kit configuration uses the Hart Software
Service's (HSS) payload generator tool. This tool creates a formatted
payload image for the HSS zero-stage bootloader on PolarFire SoC,
given a configuration file and a set of ELF binaries. The
configuration file is used to map the ELF binaries or binary blobs to
the individual application harts (U54s). Add the HSS payload generator
as a host package to support this.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit duplicates the asus_tinker_rk3288_defconfig changing:
- BR2_LINUX_KERNEL_INTREE_DTS_NAME to rk3288-tinker-s
- BR2_TARGET_UBOOT_BOARD_DEFCONFIG to tinker-s-rk3288
- extlinux.conf devicetree to /boot/rk3288-tinker-s.dtb
- root device format to <major>:<minor> in order to prevent the kernel to mount rootfs
from the wrong device
- Add Flávio Tapajós for configs/asus_tinker-s_rk3288_defconfig and for
configs/asus_tinker-s_rk3288_defconfig and for board/asus/tinker-s
Signed-off-by: Flávio Tapajós <flavio.tapajos@newtesc.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While it's not strictly necessary to update go-bootstrap-stage2, we can
continue to update the package to the latest 1.19.x until Go 1.19.x is
discontinued, at which point we can leave it at the final 1.19.x
version.
This package is only used when bootstrapping host-go.
go1.19.11 includes a security fix to the net/http package, as well as
bug fixes to cgo, the cover tool, the go command, the runtime, and the
go/printer package.
https://go.dev/doc/devel/release#go1.19.minor
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the newly introduce backend option (4cf79d9b71)
to specify what cmake backend to use, instead of special-coding it's use.
Signed-off-by: Thomas Devoogdt <thomas@devoogdt.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps the versal_vck190_defconfig to xilinx-v2023.1 which includes
the following updates:
- Linux v6.1.5
- U-Boot v2023.01
- TF-A v2.8 (including mainline patches)
- PLM xilinx_v2023.1
- PSMFW xilinx_v2023.1
- versal-firmware uses new github.com/Xilinx/soc-prebuilt-firmware repo
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The m68k Linux kernel build is broken with binutils >= 2.41 with:
arch/m68k/fpsp040/skeleton.S: Assembler messages:
arch/m68k/fpsp040/skeleton.S:502: Error: junk at end of line, first unrecognized character is `#'
arch/m68k/fpsp040/skeleton.S:508: Error: junk at end of line, first unrecognized character is `#'
This commit adds a backport from the upstream Linux kernel which fixes
this issue. Many thanks to Romain Naour for the issue investigation
and the identification of the kernel commit fixing this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In upstream commit e71ecc8771a4f13bc6046438ab0845944831b9a6 ("build:
Remove deprecated -Diconv option"), merged since glib 2.75.1, the
meson -Diconv option was removed.
In Buildroot, this means that the build of libglib2 has been broken
since commit 3f9622fe3d, which bumped
libglib2 from 2.72.3 to 2.76.1 for configurations that have libiconv
enabled, causing this build failure:
../output-1/build/libglib2-2.76.1/meson.build:1:0: ERROR: Unknown options: "iconv"
iconv is now automatically detected by Meson machinery, and so the
option was considered as no longer being needed. This commit fixes
that by dropping the useless -Diconv=external.
Another related change done is remove the double addition of libiconv
into the <pkg>_DEPENDENCIES variable: libiconv can only be enabled
when BR2_ENABLE_LOCALE is disabled, and libglib2/Config.in selects
BR2_PACKAGE_LIBICONV when !BR2_ENABLE_LOCALE. So testing
BR2_ENABLE_LOCALE!=y and BR2_PACKAGE_LIBICONV=y is exactly the same
thing, causing libiconv to be added twice to the dependencies.
Fixes:
http://autobuild.buildroot.net/results/d2da03f7558f3b6ee59c813bb64115702e52704c/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libheif package fails to build for the M68K architecture due to a binutils
bug that leads to:
Internal error in emit_expr_encoded at dw2gencfi.c:215
Let's add binutils bug to avoid to deal with architectures in packages
when a binutils bug arises. Let's instead deal directly with binutils
bug number.
It's been reported upstream:
https://sourceware.org/bugzilla/show_bug.cgi?id=30730
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 134900401f (support/scripts/fix-rpath: parallelize patching
files) broke the rpath fixup, because it improperly quoted or expanded
variables:
- $@ was expanded in the main() context, rather than in the sub-bash
as expected, propagating incorrect parameters to patch_file();
- an array was passed without array expansion, so only the first item
was passed; that was in turn assigned to a string, anyway loosign
the array. Liuckily, we only ever put a single item in that array,
so that worked by chance.
We fix that by inverting the parameters to patch_elf(), where the extra
args are passed last, so we can put as many we want in the future. We
also pass every variables as positional parameters outside the bash -c
command, which allows us proper quoting of all variables, specifically
of the extra args array which now comes last.
The ultralong line was split, too, in a hopefully easier-to-read form.
Fixing all that also required fixing the many shellcheck issues at the
same time (wome were pre-existing before 134900401f).
While at it, expand two TABs into spaces like the rest of the script.
Note: shellcheck does not seem to warn when a variable expansion will be
used as the command to run, i.e. ${PATCHELF} does not trigger the
quoting error. Still, for consistency, we also double-quote it (we know
it is a single word, as it is already double-quoted once in the script).
Fixes: 134900401f
Cc: Victor Dumas <dumasv.dev@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- improve 8ULP support (rev A1)
- add mmc user fastboot support
- add fastboot partconf support
- add nitrogen8mp smarc support
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The release tarball of check 0.15.2 lacks a source file, causing a
build failure, as reported at
https://github.com/libcheck/check/issues/303. This failures happens
when thread support is not available, as the file missing is getting
compiled in when thread support is not there:
if(NOT HAVE_PTHREAD)
target_sources(check PRIVATE ${CMAKE_CURRENT_SOURCE_DIR}/../lib/pthread_mutex.c)
target_sources(checkShared PRIVATE ${CMAKE_CURRENT_SOURCE_DIR}/../lib/pthread_mutex.c)
endif()
This issue started appearing when we moved from the autotools build
system to the CMake build system in commit
6dfc789f4f. One might wonder why
changing the build system can cause this kind of issue: the file was
in fact already missing. Turns out that the missing file is never used
with the autotools build system: this file provides some Win32
compatibility layer for pthread functions, so the autotools build
system never compiled this file as the autotools build system was only
used on Unix platforms. With CMake it now gets compiled to support
Windows platform. But on Linux, the entire contents of the file is
ignored as it is within a HAVE_WIN32_INIT_ONCE ifdef...endif. Still,
with the file missing, the build fails.
Until upstream publishes a new release with a complete tarball, switch
to fetching the Github-generated tarball, which does contain the
missing file.
Fixes:
http://autobuild.buildroot.net/results/b1087e9a67ff0382632b73f280fabe92cd863593/
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 4cf79d9b71 (pkg-cmake: add option to select the Ninja
generator) forgot to account for the late expansion rule in the inner
infrastructure macros, which breaks the build in two ways:
1. the expansion of $(firstword $$(MAKE)) does not actually expands to
the first word, but to the full value of $(MAKE);
2. the paths are invalid for per-package directories.
Fix that by applying the proper double-dollar rule for inner macros.
Reported-by: Thomas Devoogdt <thomas.devoogdt@barco.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Using "xargs" instead of "while read" loop allows for the patching of
files to be parallelized. This significantly reduces the amount of
time it takes to fix all the paths. On a larger RFS(~300MB) this
script was taking 5 minutes, it now only takes about 30s on a 12 core
machine.
Signed-off-by: Victor Dumas <dumasv.dev@gmail.com>
[Thomas: take into account the suggestion of Quentin Schulz to pass
PARALLEL_JOBS through the environment down to the fix-rpath script]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
mpd's Config.in selects expat and/or yajl depending on which
sub-options is enabled, and adds build dependencies, but does not pass
-D<option>=enabled/disabled for both of these features, relying on
auto-detection.
This commit fixes that by explicitly enabling/disabling expat and yajl
depending on their presence. The mpd sub-options no longer need to
have these as build-time dependencies, as it is handled globally.
Signed-off-by: Andreas Ziegler <br015@umbiko.net>
[Thomas: extracted from
https://patchwork.ozlabs.org/project/buildroot/patch/20221005091032.3014-5-br015@umbiko.net/]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Just like BR2_PACKAGE_MPD_UPNP_PUPNP needs expat and curl support,
BR2_PACKAGE_MPD_UPNP_NPUPNP also needs expat and curl. curl was
already selected, but not expat. It didn't cause any visible issue, as
BR2_PACKAGE_MPD_UPNP_NPUPNP selects BR2_PACKAGE_LIBNPUPNP, which
itself select BR2_PACKAGE_EXPAT. But as mpd directly checks for the
availability of expat, it makes sense to also select it directly.
Signed-off-by: Andreas Ziegler <br015@umbiko.net>
[Thomas: extracted from a larger patch at
https://patchwork.ozlabs.org/project/buildroot/patch/20221005091032.3014-5-br015@umbiko.net/]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
id3tag is a sub-feature that is needed to extract information from mp3 files.
It selects the corresponding library and handles config settings. Two other
features need this sub-feature, but handle all library selections themselves
and omit enabling the id3tag feature. In consequence, users have to remember
to select both mp3 library and id3tag, otherwise the mpd executable will not
process mp3 files.
Reflect feature dependency in mpd Config.in to make id3tag selection automatic.
Signed-off-by: Andreas Ziegler <br015@umbiko.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit 54b9008d48 ("package/mpd: bump
to version 0.21.11"), mpd was migrated from using the autotools build
system to the meson build system.
As part of this, the BR2_PACKAGE_MPD_TCP was incorrectly modified,
leading BR2_PACKAGE_MPD_TCP disabled to actually enable TCP, and
BR2_PACKAGE_MPD_TCP enabled to not explicitly enable TCP support.
This commit fixes that by handling this option in the common way.
Signed-off-by: Andreas Ziegler <br015@umbiko.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds support for the i.MX8DXL SoC from NXP, by adding a
new BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8DXL and propagate its
support in the affected packages.
Signed-off-by: Stefan Nickl <Stefan.Nickl@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The COPYING and EULA files have changed, with the following main
changes:
- update to copyright years
- switch from ASCCI double quotes to fancy Unicode ones ("" -> “”)
- reflow the license text
- identify new third-parties and their conditions
Signed-off-by: Stefan Nickl <Stefan.Nickl@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The COPYING and EULA files have changed, with various changes, mainly:
- update to copyright years
- switch from ASCCI double quotes to fancy Unicode ones ("" -> “”)
- reflow the license text
- identify new third-parties and their conditions
Signed-off-by: Stefan Nickl <Stefan.Nickl@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Both the COPYING and EULA files have changed, with the following main
changes:
- update to copyright years (2022 -> 2023)
- switch from ASCCI double quotes to fancy Unicode ones ("" -> “”)
- reflow the license text
- identify new third-parties and their conditions
Signed-off-by: Stefan Nickl <Stefan.Nickl@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps the zynqmp defconfigs to xilinx-v2023.1 which includes
the following updates:
- Linux v6.1.5
- U-Boot v2023.01
- ATF v2.8 (including mainline buildroot patches)
- PMUFW xilinx_v2023.1
- Updated pm_cfg_obj.c from Vitis v2023.1
- Removed kria u-boot patch which is included with xilinx-v2023.1
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The less package currently installs only the "less" binary, rather
than running the default "make install" behavior from the autotools
build system.
However, at least another binary, "lessecho" is needed for the "s"
command in less to work properly: so in that sense this commit is
fixing a broken behavior.
Since the less installation only installs 3 programs, "less",
"lessopen" and "lesskey", there is no good reason to not use the
default installation command, which we do in this commit.
Signed-off-by: Nicolas Carrier <carrier.nicolas0@gmail.com>
[Thomas: rework commit message]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that gdb 13.x has been added, and 12.x made the default, follow
our usual logic of dropping the oldest gdb version: 10.x.
Only the special ARC release still needs some special handling of the
GMP dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We can remove the quirk around BR2_or1k: it was there to make sure
that 11.x was the default when no target gdb is selected for all
architectures except or1k, and that 12.x would be used by default on
or1k, as 11.x is not available/broken.
Now that 12.x is the default for everybody, this quirk is no longer
needed. 11.x was already no selectable for or1k, and remains not
selectable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Sadly, the stack of patches remain exactly the same, none of the
changes have been upstreamed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Like git which can have submodules, subversion can have externals. The
default behaviour for subversion is to retrieve all the externals,
unless told otherwise.
For some repositories, the externals may be huge (e.g. a dataset or some
assets) and may not be required for building the package. In such a
case, retrieving the externals is both a waste of network bandwitdh and
time, and a waste of disk storage.
Like for git submodules and git lfs, add an option that packages can set
to specify whether they want externals or not.
Since we've so far been retrieving externals, we keep that the default,
and packages can opt-out (rather than the opt-in for git submodules or
git lfs).
We must only set it when the package is actually hosted on svn, to avoid
passing -r when the package is not hosted by svn; otherwise, -r would
also be passed e.g. to a git-hosted package, triggering the download of
git submodules even when they are not requested. We need to do so,
because we have a default value, which we usually do not have in other
download options.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When an svn repository requires credentials, and they are passed
in _DL_OPTS, they must be used also to retrieve the revision date.
One could argue that credentials should not be handled in _DL_OPTS, but
rather that they be fed through other means (e.g. by pre-authenticating
manually once in an interactive session, or by filling them in the usual
~/svn/auth/* mechanisms for a CI).
However, some public facing repositories are using authentication, even
though the credentials are public. This is the case for example for:
http://software.rtcm-ntrip.org/
In such a case, it does make sense to pass credentials via _DL_OPTS,
because they are not really, even really not, secret.
Another use-case (e.g. for a CI) is to pass the credentials as
environment variables, with _DL_OPTS not hard-coded in the .mk file.
However, _DL_OPTS may contain options that are not valid for 'svn info',
as they are meant to be passed to 'svn export' in the first place. Since
the only options common to 'svn info' and 'svn export' are the
credentials, we just extract those and pass them to 'svn info'.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bizarrely enough, the unquoted expansion of ${quiet} does not trigger
any warning from shellcheck, so we do not add any exception for it.
${SVN} can contain more than one item, but we don't care about splitting
on spaces when we just print it for debug, so we can just quote it
rather than add an exception.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
uClibc now provides fexecve(), so crun can build just fine with
uClibc. However, argp-standalone is needed, just like it was needed
for musl.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Libsoup3 has a new API [1], packages using libsoup may not compile
with libsoup3 or may crash at runtime in unexpected ways, so we add a
new package. It can be installed side by site with libsoup, without
any conflict.
[1] https://libsoup.org/libsoup-3.0/ch02.html
Signed-off-by: Thomas Devoogdt <thomas@devoogdt.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the newly introduce backend option to specify what cmake backend to
use, in lieue of special-coding its use as done in 78d499409f
(package/wpewebkit: Build with ninja).
Signed-off-by: Thomas Devoogdt <thomas.devoogdt@barco.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Use the newly introduce backend option to specify what cmake backend to
use, in lieue of special-coding its use as done in 16e5c92ff5
(package/webkitgtk: Build with ninja).
Signed-off-by: Thomas Devoogdt <thomas.devoogdt@barco.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
elf2flt needs to link against libbfd.a and libiberty.a which are
provided by host-binutils, but not installed, so we poke directly
into the host-binutils build directory. While not very nice, it has
already been like this for a long time. We could build host-binutils
with --enable-install-libbfd and --enable-install-libiberty so that
those libraries are installed, but we prefer to do this separately,
and there is a serious potential for perturbations to other packages
by having libbfd/libiberty installed in $(HOST_DIR).
In the mean time, an issue of poking directly into the host-binutils
build directory is that the location of libbfd.a has changed in
binutils >= 2.41, so we special case binutils 2.39 and 2.40, which are
the two remaining versions still using the "old" path".
Note: the ARC-special binutils version is not considered because
Buildroot only supports ARC CPUs with a MMU and therefore host-elf2flt
is never used on ARC.
Fixes:
gcc: error: /builds/buildroot.org/toolchains-builder/build/output/build/host-binutils-2.41/bfd/libbfd.a: No such file or directory
When build host-elf2flt against host-binutils 2.41.
This issue is not visible in the autobuilders as it is hidden by the
BFD_VMA_FMT issue fixed in the previous commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some patches had some fuzz, and patch 0004 was no longer applicable
using "git am". Patch 0006 is renamed so that it matches the commit
log title, as generated automatically by git format-patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cmake supports multiple generators. For now, Buildroot only uses the
venerable "GNU Makefile" generator, which generates Makefiles as the
build backend.
Cmake also has support for Ninja as a build backend, and provides the
corresponding generator. Ninja is a small build system with a focus on
speed. It is mainly used with the meson build system, but also cmake has
very good support for it.
Packages that are selecting Ninja (or over time another generator),
should also use the _BUILD_{ENV,OPTS} variables instead of the _MAKE
variables.
No _INSTALL{,_STAGING,_TARGET}_OPTS used so far, so reuse as cmake install opts:
$ grep '_INSTALL_OPTS' $(git grep -l -E '\$\(eval \$\((host-)?cmake-package))')
$ grep '_INSTALL_STAGING_OPTS' $(git grep -l -E '\$\(eval \$\((host-)?cmake-package))')
$ grep '_INSTALL_TARGET_OPTS' $(git grep -l -E '\$\(eval \$\((host-)?cmake-package))')
The _MAKE_{ENV,OPTS} are copied to _BUILD_{ENV,OPTS}, involved packages:
$ grep '_MAKE_ENV =' $(git grep -l -E '\$\(eval \$\((host-)?cmake-package))')
package/netopeer2/netopeer2.mk:NETOPEER2_MAKE_ENV = \
package/racehound/racehound.mk:RACEHOUND_MAKE_ENV = $(LINUX_MAKE_FLAGS)
(qt6, webkitgtk, and wpewebkit also match, but already use -Gninja)
$ grep '_MAKE_OPTS =' $(git grep -l -E '\$\(eval \$\((host-)?cmake-package))')
package/mariadb/mariadb.mk:HOST_MARIADB_MAKE_OPTS = import_executables
package/zeek/zeek.mk:HOST_ZEEK_MAKE_OPTS = binpac bifcl
Only "musepack" seems to overwrite MAKE to enforce -j1, so replace it:
$ grep '_MAKE =' $(git grep -l -E '\$\(eval \$\((host-)?cmake-package))')
package/musepack/musepack.mk:MUSEPACK_MAKE = $(MAKE1)
Signed-off-by: Thomas Devoogdt <thomas.devoogdt@barco.com>
Reviewed-by: John Keeping <john@metanate.com>
[yann.morin.1998@free.fr:
- switch to FOO_CMAKE_BACKEND = (make|ninja)
- use firstword of $(MAKE), not $(BR2_MAKE)
- explain why we use firstword of $(MAKE)
- update manual with the three new variables
- yweak commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In 2b43579e94 (package/gdal: switch to cmake build to fix libgeotiff
detection) a workaround was added to use the generated 'Makefile' rather
than the bundled-for-autotools GNUMakefile, which was supposedly removed
for the then upcoming 3.6 version.
In 4c17985880 (package/gdal: bump version to 3.6.2) the bump occured,
but the workaround was left untouched. However, in 3.6.2, there is
indeed no GNUMakefile anymore.
Drop the workaround now.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since the bump of ccache from 4.7.4 to 4.8.2 in Buildroot commit
1db3f0f844 ("package/ccache: bump
version to 4.8.2"), it started failing to build on machines that use
gcc 12.3, due to a bug in gcc:
/home/buildroot/autobuild/instance-0/output-1/build/host-ccache-4.8.2/src/storage/local/LocalStorage.cpp:701:24: required from here
/home/buildroot/autobuild/instance-0/output-1/build/host-ccache-4.8.2/src/Logging.hpp:33:7: internal compiler error: Segmentation fault
33 | Logging::log(std::string_view(message_)); \
| ^~~~~~~
Upstream ccache has committed a workaround to avoid this compiler bug,
which we backport in this commit.
Fixes:
http://autobuild.buildroot.net/results/cd341365d1c429bfca505a742e86b3090897db23/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The at91dataflashboot code contains some hand-written ARM assembly
that uses ARM classic instructions, and will not build in Thumb-1
mode.
This issue has always existed in Buildroot, but it's only since we
started testing random configurations, including Thumb-1
configurations, that this issue popped up.
Fixes:
http://autobuild.buildroot.net/results/68bf2291201ef1882d8e8d3eca2b1a5ad731e4b0/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
http://autobuild.buildroot.net/results/992/99235aa2aca1afe031a088baebbd46057fe75fcd/
/home/autobuild/autobuild/instance-15/output-1/build/tvheadend-fe47ecb5504a521fed9c1ca9705fb0dd2bb8443a/src/atomic.h:253:
undefined reference to `__sync_lock_test_and_set_8'
/home/autobuild/autobuild/instance-15/output-1/build/tvheadend-fe47ecb5504a521fed9c1ca9705fb0dd2bb8443a/src/atomic.h:81:
undefined reference to `__sync_fetch_and_add_8'
The build error was introduced by the latest bump of tvheadend with
commit 67cbbbfe6e.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Buildroot commit 319c56dfe3 bumped
stellarium which included this commit
https://github.com/Stellarium/stellarium/commit/186b06fa215bd28ea03cc291dc861b552af8d99a
It removed the previously bundled QXlsx source and lets stellarium
git-clone the sourcecode of the QXlsx package (not present in buildroot)
during the build:
$ find output/build/stellarium-23.2/ -iname .gitignore | grep qxl
output/build/stellarium-23.2/_deps/qxlsxqt5-src/.gitignore
which breaks offline builds.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Buildroot commit 319c56dfe3 bumped
stellarium which included this commit
https://github.com/Stellarium/stellarium/commit/186b06fa215bd28ea03cc291dc861b552af8d99a
It removed the previously bundled libindi source and lets stellarium
download the sourcecode of the indiclient package (not present in
buildroot) during the build:
$ find output/build/stellarium-23.2/ -iname *.zip
output/build/stellarium-23.2/_deps/indiclient-subbuild/indiclient-populate-prefix/src/v1.8.5.zip
which breaks offline builds.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch adds an option that allows you to not install the data along
with the binaries (less than 100kb), saving 1.4Mb of rootfs data.
By default, the data is installed for backward compatibility.
Cc: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Buildroot 2022.05 use binutils 2.37 by default, but the binutils
version was downgraded to the previous binutils version in qemu_ppc64*
defconfigs due to a bug in binutils 2.37 [1].
Later when binutils 2.36 has been removed the binutils version has
been updated to 2.38 (even though it was already the default version
selected by Buildroot at that time) [2].
Since then, several binutils release has been added and the binutils
version 2.38 has been removed recently [3].
Since the initial bug is gone with the removal of binutils 2.37,
we can safely remove the binutils version from qemu_ppc64 defconfigs.
[1] 1e2fe860f3
[2] e461c9adc8
[3] 1391c99d62
Fixes:
https://gitlab.com/buildroot.org/toolchains-builder/-/jobs/4798047373
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Cédric Le Goater <clg@kaod.org>
Cc: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There is no such thing as a BR2_TARGET_GENERIC_TTY_PATH variable. The
comment here should mention BR2_TARGET_GENERIC_GETTY_PORT instead.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
go1.20.7 (released 2023-08-01) includes a security fix to the crypto/tls
package, as well as bug fixes to the assembler and the compiler.
Fixes CVE-2023-29409: restrict RSA keys in certificates to <= 8192 bits
Extremely large RSA keys in certificate chains can cause a client/server to
expend significant CPU time verifying signatures. Limit this by restricting the
size of RSA keys transmitted during handshakes to <= 8192 bits.
Based on a survey of publicly trusted RSA keys, there are currently only three
certificates in circulation with keys larger than this, and all three appear to
be test certificates that are not actively deployed. It is possible there are
larger keys in use in private PKIs, but we target the web PKI, so causing
breakage here in the interests of increasing the default safety of users of
crypto/tls seems reasonable.
https://go.dev/doc/devel/release#go1.20.7
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since its introduction in 7d8a59b40, the BR2_x86_geode CPU target has
pointed to GCC -march=geode which targets AMD Geode processors [0].
This arch tuning enables MMX and 3DNow! extensions in GCC but these are
not currently reflected in the selected flags by BR2_x86_geode.
This is likely due to the confusing naming and history of "Geode".
The AMD Geode can trace its origins back to the Cyrix MediaGXm [1] and
then to the NSC Geode GXm/GXLV/GX1/GX2 [2]. All of these processors have
MMX instruction support listed in their datasheets. The NSC GX2 was the
first in the series to enable 3DNow!.
When 7fed07d3a4 introduced BR2_X86_CPU_HAS_MMX, Geode was skipped
presumably because it wasn't clear that the target is AMD Geode and
because the Wikipedia documentation for Geode is incomplete [2] with
regards to supported instructions as they all support MMX.
When f6cd56b9ce introduced BR2_X86_CPU_HAS_3DNOW, Geode was skipped
presumably for similar reasons.
Note: the in-tree olpc_xo1_defconfig uses BR2_x86_geode which is fine
as this hardware uses the AMD Geode [3].
Make it more clear that the target is AMD Geode by renaming the Kconfig
menu option and add both MMX and 3DNow! flags to BR2_x86_geode.
This also means that BR2_x86_geode_mmx is no longer needed, and can be
removed. No legacy handling is needed since BR2_x86_geode_mmx has
never been part of any release.
[0]: https://gcc.gnu.org/git/?p=gcc.git;a=blob;f=gcc/config/i386/geode.md;;hb=HEAD
[1]: https://en.wikipedia.org/wiki/MediaGX#MediaGXm
[2]: https://en.wikipedia.org/wiki/Geode_%28processor%29
[3]: https://wiki.laptop.org/go/Hardware_specification
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that 2.41.x has been added, that 2.40.x is the default version,
drop support for 2.38.x.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that 2.41 has been released, let's use 2.40.x as the default
binutils version.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Release notes:
https://sourceware.org/pipermail/binutils/2023-July/128719.html
Copied patches from version 2.40.
Build-tested using these four defconfigs:
----------
BR2_arceb=y
----------
BR2_BINUTILS_VERSION_2_39_X=y
----------
(empty defconfig meaning binutils-2.40)
----------
BR2_BINUTILS_VERSION_2_41_X=y
----------
each using these commands:
$ make host-libiberty
$ make host-binutils
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
composer describes itself as a dependency manager for PHP, it is used
by projects such as CakePHP.
Signed-off-by: Nicolas Carrier <carrier.nicolas0@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Having a working PHP with the correct version, is mandatory for
executing some PHP tools, such as composer, when building packages.
Signed-off-by: Nicolas Carrier <carrier.nicolas0@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
mhz is a tool to mathematically calculate the real running CPU frequency
and as such has proved as invaluable tool for developing CPUFreq and
similar features in the kernel.
Its source finally got a license recently so it can be packaged.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit [1], the testsuite build is unconditionally disabled
although we have the option BR2_PACKAGE_XENOMAI_TESTSUITE to
install Xenomai testsuite on the target.
Handle --disable-testsuite option with BR2_PACKAGE_XENOMAI_TESTSUITE.
[1] 74196b7d05
Signed-off-by: Pierre Ficheux <pierre.ficheux@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add purge loacle data support (inspired by BR2_ENABLE_LOCALE_PURGE
handling in Makefile) to reduce target space allocation by the
python-babel package, e.g. from 32MB to 24K for
target/usr/lib/python3.11/site-packages/babel/locale-data with
BR2_ENABLE_LOCALE_WHITELIST="C en_US de_DE".
The special en_US_POSIX locale data is kept as it is used by default
by the python-babel code:
https://github.com/python-babel/babel/blob/0ce196fccc024b1a65453ba6519954ada1dab6cb/babel/core.py#L1076
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds esp-hosted package that allows to build the Linux
Kernel Driver for Espressif Esp32-* SoCs, that once programmed with
the corresponding firmware behave like a normal Wi-Fi module. Both
SDIO and SPI busses are supported and selectable.
Cc: Jesse Taube <jesse.taube@benettiengineering.com>
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Provides the `swaybg` utility, which is commonly used with `sway` to
manage background images/color configuration for the compositor.
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Patch 0001-cmake-Check-USE_BUNDLED_DEPS-before-getting-nlohmann.patch
should have been deleted as part of Buildroot commit
08792a60df ("package/sysdig: bump to
version 0.29.3"). Indeed, this patch was merged upstream as commit
114436c1a45142ef73acfc2607fbc6572782160f between 0.29.2 and 0.29.3.
This fixes the following build failure:
Applying 0001-cmake-Check-USE_BUNDLED_DEPS-before-getting-nlohmann.patch using patch:
patching file cmake/modules/nlohmann-json.cmake
Reversed (or previously applied) patch detected! Skipping patch.
1 out of 1 hunk ignored -- saving rejects to file cmake/modules/nlohmann-json.cmake.rej
There are no autobuilder failures, probably because getting to build
sysdig requires so many special conditions that it never triggered.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 9079079092 (utils/docker-run: fix support for git-worktrees)
got last-minute changes when it was applied, and the case when the
current working directory is not the top of the current working copy
got broken.
Fix that by duplicating (and thus reinstating) the 'cd MAIN_DIR' to
match what is done when retrieving the git-common-dir.
Fixes: 9079079092
Reported-by: Brandon Maier <Brandon.Maier@collins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
From https://marlam.de/msmtp/news/:
"""
msmtp 1.8.24 is released
2023-06-29
This release fixes the allow_from_override command, adds the
from_full_name command, fixes a few minor bugs and updates the
translations (thanks again to everyone at translationproject.org).
msmtp 1.8.23 is released
2023-01-30
This release fixes XOAUTH2 authentication with some servers, updates
the msmtpq scripts, and updates the translations (including a new
Swedish translation).
"""
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The cmocka package checks if a toolchain supports the
-fstack-clash-protection compiler flag, and if it does automatically
uses it. That flag is not supported by GCC for Thumb1 builds (at least
as of both GCC 11 and GCC 12). Let's tell cmocka about this by passing
-DWITH_STACK_CLASH_PROTECTION=OFF in this configuration, as suggested
by Arnout Vandecappelle.
Fixes:
http://autobuild.buildroot.net/results/4044b3a71d3130d934c7a7c0c5badfabb2a97030/
Signed-off-by: Joel Carlson <JoelsonCarl@gmail.com>
[Thomas: change the initial patch from Joel to use the suggestion from
Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add swugenerator as host utility to generate images for swupdate with
all the possible options available like encryption, passkey etc.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Current versions of sam-ba are 64bit only.
objdump -p $(HOST_DIR)/bin/sam-ba
$(HOST_DIR)/bin/sam-ba: file format elf64-x86-64
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This library provides an API suitable for the decode of
ARM(r) CoreSight(tm) trace streams.
OpenCSD is for example an optional dependency in the Linux
"perf" tool, starting from kernel version 5.1.
https://github.com/Linaro/OpenCSD
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If the libiberty package is not the same version as the one packaged
with binutils AND if libiberty is installed before binutils, then the
below error is observed. Hence for now let us keep the versions in sync.
/usr/bin/ld: ../libiberty/libiberty.a(hashtab.o):(.data.rel.local+0x0)
: multiple definition of `htab_eq_pointer'
Fixes:
http://autobuild.buildroot.net/results/f07/f077ec588b395102ad501a18c85d5030c0765031/
Build-tested using these four defconfigs:
----------
BR2_arceb=y
----------
BR2_BINUTILS_VERSION_2_38_X=y
----------
(empty defconfig meaning binutils-2.39)
----------
BR2_BINUTILS_VERSION_2_40_X=y
----------
each using these commands:
$ make host-libiberty
$ make host-binutils
Signed-off-by: Akshay Bhat <nodeax@gmail.com>
[Bernd: bump to version 2.40, replace hash file with link to binutils]
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Similar to dnsmasq, mrouted saves state data across reboots in the
/var/lib/misc/ directory. In the case of mrouted it is the unique
generation id (used by neighboring mrouted routers to identify any
router restarting). This file is generated on first boot.
Workaround only needed for systemd builds, the sysv skeleton already
has the /var/lib/misc/ directory.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Upstream ChangeLog:
- Ignore IGMP proxy querys (src ip: 0.0.0.0), they must never win a
querier election
- Fix compat read location and new location for mrouted.genid
- Fix "non-decreasing" generation id, must increment on each restart
- Add support for configurable IGMP query response interval
- Add support for configurable IGMP querier timeout
- New 'join-group <group>' phyint option for cases where an IGMP
snooping switch blocks flooding of multicast to the port where
mrouted is connected
- On startup and reconf, log why we skip disabled interfaces
- Change to always log when assuming the IGMP querier role
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Similar to dnsmasq, ssdp-responder saves state data across reboots in
the /var/lib/misc/ directory. In the case of ssdp-responder it is the
(per-device unique) UUID that is generated on first boot.
Workaround only needed for systemd builds, the sysv skeleton already has
the /var/lib/misc/ directory.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Upstream ChangeLog, summary:
- Add support for JSON output with 'ssdpd-scan -j'
- Dump received data from devices in 'ssdp-scan -l debug'
- Termios support for disabling '^C' output from 'ssdp-scan'
- Update copyright years, LICENSE file hash change
- Source '/etc/default/ssdpd' from systemd unit file
- Add fallback if '/var/lib/misc' is missing on system
- Fix truncated UUID when reading from cache file
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add patch to enable build without c++.
Add configure option to fix subsequent configure error due to patched
source file during git version check:
CMake Error at cmake/GitVersion.cmake:118 (message):
Unable to find current project version !
Call Stack (most recent call first):
CMakeLists.txt:100 (GetGitVersion)
Fixes:
http://autobuild.buildroot.net/results/2f8/2f819871a89cb2a2df239b1f879c1babcdd022fc/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
objtool built by the kernel requires libelf
ldd TestSELinuxSystemdExt4/build/linux-6.1.26/tools/objtool/objtool
linux-vdso.so.1
libelf.so.1 => TestSELinuxSystemdExt4/host/lib/libelf.so.1
While updating the kernel used in TestSELinuxSystemd [1] we
forgot to select BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF to provide
Buildroot's host-libelf. Using host-libelf avoid linking with
libelf installed on the host or failing to build objtool if
libelf is not installed.
[1] 60b84fb7ce
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4725186370 (TestSELinuxSystemdSquashfs)
https://gitlab.com/buildroot.org/buildroot/-/jobs/4725186368 (TestSELinuxSystemdExt4)
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The bind package exhibits gcc bug 101737 when built for the SH4
architecture with optimization enabled, which causes a build failure.
As done for other packages in Buildroot work around this gcc bug by
setting optimization to -O0 if BR2_TOOLCHAIN_HAS_GCC_BUG_101737=y.
To achieve this we need to correct the override of CFLAGS by using:
BIND_CONF_OPTS += CFLAGS="$(BIND_CFLAGS)"
instead of:
BIND_CONF_ENV = BUILD_CFLAGS"$(BIND_CFLAGS)"
since the latter doesn't work as expected and doesn't override CFLAGS.
Fixes:
http://autobuild.buildroot.net/results/e7b/e7b9a4cbee8bb16431609182b96d1ac1ccec10e7/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The rtl8821cu repository comes with a 8821cu.conf file intended to be installed
in /etc/modprobe.d - the configuration file enables some driver features.
Install the /etc/modprobe.d/8821cu.conf file to the target.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The docker-run script attempts to support git-new-workdirs and
git-worktrees by resolving the symlink at '$GIT_DIR/config' to get the
true $GIT_DIR. However this does not work for git-worktrees as they do
not use symlinks, instead they change the $GIT_DIR into a regular file
that contains the path to the real $GIT_DIR. To complicate things
further, we actually want the $GIT_COMMON_DIR which is the superset of a
worktree's $GIT_DIR.
git-rev-parse supports the '--git-common-dir' which will resolve the
$GIT_COMMON_DIR for us. However it does not work for git-new-workdirs,
so we still need to detect and handle them.
'--git-common-dir' also appeared only with git 2.10.0, released in 2016,
so it will not be available in older "enterprise-grade" distributions.
In that case, 'git rev-parse --git-common-dir' would return the option
flag '--git-common-dir' as-is, which is incorrect. So, we instruct it to
never return flags.
'--git-common-dir' also returns just '.git' for the main working copy,
but 'docker run' want an absolute path, so we canonicalise it.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
[yann.morin.1998@free.fr:
- support git versions before --git-common-dir was introduced
- don't mount GIT_DIR if unknown (i.e. not needed)
- fix expanding MAIN_DIR
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since commit 247ef2a fio has optional libiscsi engine support
This patch enables fio iscsi support if BR2_PACKAGE_LIBISCSI
was selected, which also requires pkg-config as it is used by the
configure script to detect libiscsi.
There is no --disable-libscsi option in the configure script: if
--enable-libiscsi is not passed, it doesn't even try to detect/use
libiscsi.
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changelog 1.09 -> 1.10:
ef1034d Tag version 1.10
c596390 Controlling TTY code fix.
32b7553 Help message problems
c89cee9 Convert repository from SVN to git
934f87f Sig unsafe functions in signal handler
ed856e6 Better "-e" handling.
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Also apply system.conf and session.conf updates to dbus-broker.
License file is changed due to:
-D-Bus is licensed to you under your choice of the Academic Free
+dbus is licensed to you under your choice of the Academic Free
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add aarch64 to BR2_PACKAGE_MONO_ARCH_SUPPORTS to allow building for
aarch64 targets.
Compiles successfully and runs on the actual target (imx8mp based
board)
Signed-off-by: Stefan Mayrhofer <stefan@familie-mayrhofer.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
mbpoll is a tool that can be used to test communication
with modbus slave devices
Signed-off-by: Jon Ringle <jringle@gridpoint.com>
[Thomas:
- add MBPOLL_LICENSE, MBPOLL_LICENSE_FILES
- add host-pkgconf to dependencies
- improve Config.in help text]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some barebox targets need to build host tools (for example rockchip64
uses scripts/rkimage) that require some host libraries, such as
host-openssl or host-libusb. These are detected by the Barebox build
system using pkg-config.
In order to allow supporting such Barebox configurations, we add two
new options: BR2_TARGET_BAREBOX_NEEDS_OPENSSL and
BR2_TARGET_BAREBOX_NEEDS_LIBUSB that respectively allow to ensure that
host-openssl and/or host-libusb are built before Barebox.
Additionally, $(1)_MAKE_ENV is adjusted to ensure that when pkg-config
is run by the Barebox build system, it finds host libraries. This is
similar to what is done in U-Boot.
This allows to fix the following build failure:
HOSTCC scripts/rkimage
Package openssl was not found in the pkg-config search path.
Perhaps you should add the directory containing `openssl.pc'
to the PKG_CONFIG_PATH environment variable
Package 'openssl', required by 'virtual:world', not found
/usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: /tmp/ccN8Xyaj.o: in function `main':
rkimage.c:(.text.startup+0x218): undefined reference to `SHA256_Init'
/usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: rkimage.c:(.text.startup+0x22b): undefined reference to `SHA256_Update'
/usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: rkimage.c:(.text.startup+0x23e): undefined reference to `SHA256_Final'
/usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: rkimage.c:(.text.startup+0x253): undefined reference to `SHA256_Init'
/usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: rkimage.c:(.text.startup+0x265): undefined reference to `SHA256_Update'
/usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: rkimage.c:(.text.startup+0x275): undefined reference to `SHA256_Final'
collect2: error: ld returned 1 exit status
make[2]: *** [scripts/Makefile.host:107: scripts/rkimage] Error 1
make[1]: *** [Makefile:976: scripts] Error 2
Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
gcc 13.2 is around, gcc 12.3 is the default version, so drop
10.4 in order to reduce the gcc choice.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since gcc 11 [1] the sparc architecture is disabled since
it produce a non working image. Buildroot now provide gcc
13.x, 12.x and 11.x and we are going to remove gcc 10
that was the last working release (thanks to a local patch).
We have to disable the internal toolchain backend for sparc
before removing gcc 10. While at it, remove !BR2_sparc
dependency for gcc 11.x, 12.x and 13.x.
[1] 2ab88dac29
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since gcc 11 [1] the sparc architecture is disabled since
it produce a non working image. Buildroot now provide gcc
13.x, 12.x and 11.x and we are going to remove gcc 10
that was the last working release (thanks to a local patch).
First remove qemu_sparc_ss10_defconfig since it will no longer
be possible to build it with the internal toolchain backend.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Even if gcc 11 is still maintained for some time, switch to gcc 12.x
since it has been released since 2022-05-06 and gcc 13.x is available
since 2023-04-26.
We have been having toolchains in the autobuilders with gcc
12.x for a while, so the vast majority of the problems should have
already been solved.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In order to add gcc 13 support for internal and external toolchain in
follow-up commits, introduce BR2_TOOLCHAIN_GCC_AT_LEAST_13 symbol.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Building kodi with cmake version 3.22.3 provided by buildroot is broken
-- Found Python3: /home/buildroot/br6/output/per-package/kodi/host/x86_
64-buildroot-linux-gnu/sysroot/usr/include/python3.11 (found suitable
exact version "3.11.4") found components: Development Development.
Module Development.Embed
-- Could NOT find Python3 (missing: Interpreter) (Required is exact
version "3.11")
Reason given by package:
Interpreter: Cannot run the interpreter "/home/buildroot/br6/
output/per-package/kodi/host/x86_64-buildroot-linux-gnu/sysroot/
usr/bin/python3"
CMake Error at cmake/scripts/common/Macros.cmake:432 (message):
PYTHON enabled but not found
Call Stack (most recent call first):
CMakeLists.txt:214 (core_optional_dep)
using this defconfig
BR2_x86_64=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_FORCE_HOST_BUILD=y
BR2_PER_PACKAGE_DIRECTORIES=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_PACKAGE_KODI=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_IRIS=y
BR2_PACKAGE_MESA3D_OPENGL_EGL=y
BR2_PACKAGE_MESA3D_OPENGL_ES=y
BR2_PACKAGE_PYTHON3=y
BR2_PACKAGE_PYTHON3_PY_ONLY=y
BR2_PACKAGE_HOST_CMAKE=y
due to "BR2_FORCE_HOST_BUILD=y".
The cmake version provided by my distro is 3.25.1 which works fine.
Adding "CMAKE_FIND_DEBUG_MODE TRUE" to the "find_package(Python3 [...]"
call in Kodi's cmake/modules/FindPython.cmake and comparing the logfile
of both cmake versions shows that 3.25.1 adds
CMAKE_FIND_USE_INSTALL_PREFIX: 1
while searching for python3.
This option was introduced in cmake 3.24:
https://cmake.org/cmake/help/latest/variable/CMAKE_FIND_USE_INSTALL_PREFIX.html
After introducing this fix it turns out that
0002-cmake-modules-fix-python-detection.patch is not needed anymore so
we remove this patch.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If systemd is used we should enable support in mariadb and enable
"Type=notify" in the mysqld.service unit file
"Type=notify" stops systemd from starting services which depend on mariadb
until it has notified systemd that it has finished starting up, this helps
avoid startup race conditions
Signed-off-by: Danny Wood <danny@rotronics.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure:
/tmp/ccqcLrVb.s:4053: Error: selected processor does not support `umlal r2,r1,r0,r3' in Thumb mode
/tmp/ccqcLrVb.s:4076: Error: selected processor does not support `umlal r0,r3,r1,r2' in Thumb mode
/tmp/ccqcLrVb.s:8644: Error: selected processor does not support `umlal r0,r3,r2,r4' in Thumb mode
Fixes:
http://autobuild.buildroot.net/results/1d09a0a58cbc1712416de746d57d4532df580673/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bug fixes & enhancements.
One major bug fix included in this release: The Go client now avoids using UNIX
socket paths in the HTTP Host: header, in order to be compatible with changes
introduced in go1.20.6.
Previously docker commands would fail with "invalid Host header."
https://github.com/moby/moby/releases/tag/v24.0.5
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When we updated weston to version 12.0.1 the only supported launcher
was the libseat based launcher.
For this launcher to function correctly when used with weston we also
need to enable the seatd daemon.
Fixes:
[libseat/backend/logind.c:660] Could not get primary session for user: No data available
[libseat/libseat.c:76] Backend 'logind' failed to open seat, skipping
[libseat/libseat.c:79] No backend was able to open a seat
libseat: could not open seat
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop patch which is now upstream.
Drop no longer supported weston-launch/launcher-logind.
Drop no longer supported color-management-colord config option.
Remove duplicate backend-headless config option.
Add new libgbm requirement for renderer-gl.
Add new freerdp server requirement for backend-rdp.
Add support for new screenshare feature.
Add support for new rdp as backend default feature.
Add support for new pipewire backend feature.
Always enable libseat launcher.
Disable new unsupported vnc backend.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For change log since 20220331, see:
- https://github.com/acpica/acpica/blob/R06_28_23/documents/changes.txt
This commit also drop the patch removing -Werror in CFLAGS, as an
alternative is now available upstream, merged in [1]. This commit is
included in release 20221020. The build commands are updated
accordingly to set the new NOWERROR=TRUE option to achieve the same
behavior.
With the patch removal, .checkpackageignore is also updated
accordingly.
Upstream commit [2] also introduced a use of wcslen() and <wchar.h>.
This commit was first included in tag R10_20_22 (version 20221020).
Therefore, this new version need wchar. The new depedency is added.
The _SOURCE file is also changed from acpica-unix2 to acpica-unix,
as the current acpica download page at [3] shows:
"""
Note: The unix2 source package is deprecated since the dual license is
now included in all source modules (along with the Intel
license). This package will be removed from future ACPICA releases.
"""
The _SITE url is also updated to the new download link, since the
acpica website now redirects to Intel:
curl -si https://www.acpica.org | grep Location:
Location: https://www.intel.com/content/www/us/en/developer/topic-technology/open/acpica/overview.html
The license file hash is also updated, due to the copyright year
update. It is also worth mentioning that the files in the new archive
have three alternative licenses in their headers: Intel, BSD-3-Clause
and GPL-2.0.
Finally, since a SHA1 hash is published on the download page, it is
added to the hash file.
This version bump is motivated by the introduction of RISC-V related
definitions.
[1] https://github.com/acpica/acpica/commit/3fd0f940408fc01a2c52c5be5f2beb0218a3d907
[2] https://github.com/acpica/acpica/commit/cd6a30897593f6052abf0b9a791671dcf07b9596
[3] https://www.intel.com/content/www/us/en/developer/topic-technology/open/acpica/download.html
Cc: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds the defconfig file needed to build u-boot, kernel
and rootfs for the Rock 5B. In addition it adds a kernel config
fragment file, which activates the needed ethernet driver support.
It also adds a readme and post image scripts, needed to generate an
sdcard.img file, which can be flashed on an SD card to boot the
Radxa Rock 5B.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
[yann.morin.1998@free.fr:
- drop custom version
- fix shellcheck in post-image script
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently for some Rockchip SoCs binary blobs are needed, e.g., for
the RK3588 bl31 and tpl. These blobs are provided by Rockchip. This
patch adds U-Boot package options to use theses binaries, provided
by the rockchip-rkbin package, which is also introduced in this
patch series. The U-Boot package is modified so that it takes the
chosen binaries and automatically uses them during build.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
[yann.morin.1998@free.fr:
- use already-qstripped variables from rockchip-rkbin
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds a package for the Rockchip ATF binary blobs. These
binaries are needed to build U-Boot for some Rockchip SoCs (e.g.,
RK3588).
As there as so many binary blobs, for each suported SoCs, it is not
practical to introduce a choice, so one must manually define which
blobs (for bl31, tpl and optee) to use from the repository, that
match their actual board.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
[yann.morin.1998@free.fr:
- drop custom version
- simplify copying blobs
- slightly tweak help texts
- add hash for license file
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The u-boot.stm32 image is now created by binman tool, so the
BR2_TARGET_UBOOT_BUILD_FORMAT_STM32_LEGACY configuration needs to be
disabled, but pylibfdt is now needed.
Tested on stm32mp157f_dk2.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As reported in commit [1] of the U-Boot project, the config.mk file has
been suppressed in order to use binman to manage FIT
generation. Therefore, the "u-boot.stm32" make target should no longer
be used with recent versions of U-Boot.
The configuration option added by this comit allows the creation of
the u-boot.stm32 image for both recent versions of U-Boot, which use
binman, and older versions.
Legacy handling would have suggested that this new option should
"default y" to preserve existing behavior, but as moving forward all
U-Boot new versions will no longer need this u-boot.stm32 target, it
probably makes sense here to not comply with this backward
compatibility rule, as an exception.
[1] 5564b4cd4d5c69 ("stm32mp: add binman support for STM32MP15x")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Tested-by: David Reaver <me@davidreaver.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
check_fortran will display an error message if there is no Fortran
compiler in the toolchain. In the past, running into this error message
would be unlikely, since the Fortran test was only execuded when
BR2_TOOLCHAIN_HAS_FORTRAN was set.
However, since commit c7f641cbaa (toolchain/toolchain-external: always
call checks with dependencies), the Fortran check is unconditional. The
error itself benign, and the macro will handle the situation correctly,
since that is what it is designed to do. However, the error message
looks ugly and can be confusing.
[...]
>>> toolchain-external-custom Extracting
>>> toolchain-external-custom Patching
>>> toolchain-external-custom Configuring
/bin/bash: line 1: .../bin/aarch64-linux-gfortran: No such file or directory
>>> toolchain-external-custom Building
... everything continues normally ...
Let's suppress the error message, since triggerig the error is an
integral part of how the test works and doesn't mean that anything is
wrong.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Without this patch openssl adds -latomic twice to Libs.private in
libcrypto.pc:
cat output/per-package/opensc/host/arceb-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig/libcrypto.pc | grep atomic
Libs.private: -ldl -pthread -latomic -latomic
Instead of passing -latomic to Configure we use the target arch
"linux-latomic" which is provided by upstream since version 3.0.0
especially for libatomic handling:
https://github.com/openssl/openssl/commit/535130c39d33df41b6a7d14302a93ffaa10ebc46https://github.com/openssl/openssl/commit/cdf2986a70d92668d882eb29737225f1aaafd0f1
To be noted: the build still fails for both bootlin-armv7m-uclibc and
bootlin-m68k-5208-uclibc, but this is not a regression due to this
patch, and is tracked as #15709.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Kernel 6.3 has split the C22 and C45 MDIO support and mdio-tools needed to
be adapted to that.
So, now that new release with support for kernel 6.3 and later is available
lets update to it.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The symbol for Aarch64 big-endian, as added by 9b19030f3f
(package/fluent-bit: rework wasm handling), is misspelled.
Fixes: 9b19030f3f
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Buildroot commit c02707a342 added two
upstream patches with the same number, renumber the younger patch.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fluent-bit isn't very great at supporting the various architectures,
so help a little bit by defining the WAMR_BUILD_TARGET ourselves.
Two failures for MIPS while executing ./utils/test-pkg:
- sourcery-mips64:
core/iwasm/common/arch/invokeNative_mips.s: Assembler messages:
core/iwasm/common/arch/invokeNative_mips.s:58: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f12,0($sp)'
core/iwasm/common/arch/invokeNative_mips.s:59: Error: opcode not supported on this processor: mips64r2 (mips64r2) `ldc1 $f14,8($sp)'
make[4]: *** [src/wasm/CMakeFiles/vmlib-static.dir/build.make:495: src/wasm/CMakeFiles/vmlib-static.dir/__/__/lib/wasm-micro-runtime-WAMR-1.1.1/core/iwasm/common/arch/invokeNative_mips.s.o] Error 1
make[4]: *** Waiting for unfinished jobs....
- sourcery-mips:
core/iwasm/common/arch/invokeNative_mips.s: Assembler messages:
core/iwasm/common/arch/invokeNative_mips.s:58: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f12,0($sp)'
core/iwasm/common/arch/invokeNative_mips.s:59: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ldc1 $f14,8($sp)'
make[4]: *** [src/wasm/CMakeFiles/vmlib-static.dir/build.make:495: src/wasm/CMakeFiles/vmlib-static.dir/__/__/lib/wasm-micro-runtime-WAMR-1.1.1/core/iwasm/common/arch/invokeNative_mips.s.o] Error 1
make[4]: *** Waiting for unfinished jobs....
Which are fixed by setting the obscure flag "WAMR_BUILD_INVOKE_NATIVE_GENERAL".
See https://github.com/bytecodealliance/wasm-micro-runtime/issues/625 for more info:
“Hi, building the invokeNative_general.c explicitly is supported now, please pull the latest code and use
Signed-off-by: Thomas Devoogdt <thomas@devoogdt.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When building a fip firmware (BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y), the
TF-A build recipe starts by building the host program fiptool with the
proper build environment variables. Then the main TF-A target firmware
build step takes place, with the expectation that the fiptool program will
be used under the hood if necessary.
In TF-A, the build recipe for the host program fiptool has subtly changed
after v2.7, in commit cf2dd17ddda2 ("refactor(security): add OpenSSL 1.x
compatibility"). This change has the effect to force re-linking fiptool
each time.
If we try to build with Buildroot a fip firmware with a TF-A version after
v2.7 comprising the aforementioned change, the fiptool program is forcibly
re-linked during the main firmware build step. This happens without the
proper build environment variables and consequently, if openssl is not
installed on the host, the libcrypto shared library will not be found by
the linker and the link will fail with the following error:
/usr/bin/ld: cannot find -lcrypto: No such file or directory
A patch has been integrated into TF-A to avoid re-linking fiptool when not
necessary, which should solve the problem starting with version v2.10. Add
that patch in Buildroot for versions v2.8 and v2.9, to repair the build in
the cases described above.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4664845767
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Dick Olsson <hi@senzilla.io>
Cc: Sergey Matyukevich <geomatsi@gmail.com>
[yann.morin.1998@free.fr:
- don't use symlink in v2.9, just copy patch
- fix numbering in v2.8 which now has two patches
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When EDK2 OVMF is built with debug, messages are printed to
IO port 0x402. Those messages are not shown in the normal
Qemu emulated serial port. Enabling this option will print
debug messages on the emulated serial port, potentially
mixing messages with UEFI serial console output.
See OVMF README:
https://github.com/tianocore/edk2/blob/master/OvmfPkg/README
This option has been useful to debug problems such as [1], in which the
emulator was hanging at startup without any log. Enabling this option
show the debug message on the console, before hanging:
...
PlatformCpuCountBugCheck: Present=0 Possible=1
PlatformCpuCountBugCheck: Broken CPU hotplug register block found. Update QEMU to version 8+, or
PlatformCpuCountBugCheck: to a stable release with commit dab30fbef389 backported. Refer to
PlatformCpuCountBugCheck: <https://bugzilla.tianocore.org/show_bug.cgi?id=4250>.
...
[1] http://lists.busybox.net/pipermail/buildroot/2023-July/670807.html
Signed-off-by: Julien Olivain <ju.o@free.fr>
Tested-by: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, there is no MMX support for modern GEODE processors in Buildroot.
Yet, some packages like ffmpeg can leverage it when the package is built.
Signed-off-by: Cherniaev Andrei <dungeonlords789@naver.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The test_pixz.py test was initially written as a standalone test.
The commit cf132a13
"support/testing/tests/package/test_compressor_base.py: new helper class"
introduced a helper class for testing data compression programs.
This commit rewrites this test to use this helper class.
The test coverage is mostly the same as before the rewrite. Notable
differences are:
- the test file is slightly smaller for faster testing,
- its content layout also slightly different.
Cc: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commits adds support for building a RISC-V toolchain with the
vector extension, available since gcc 12.
Signed-off-by: Tianrui Wei <tianrui@tianruiwei.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fluent-bit is written in pure c, so drop any cxx handling. Only the wasm
part needs c++, but that one doesn't need the fixes which are now dropped.
Signed-off-by: Thomas Devoogdt <thomas@devoogdt.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Luajit was not used at all when it was selected, instead fluent-bit
recompiled it without taking care of the complexities that were
handled in the luajit package. Fix this by linking dynamically to the
buildroot provided version.
Signed-off-by: Thomas Devoogdt <thomas@devoogdt.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Call these unconditionally to make sure proper support is flagged so
proper dependencies are included in the resultant filesystem.
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Previously, it was possible for external toolchains to be used that had
support for languages or libraries that Buildroot was not aware of.
If Buildroot is not made aware of this support, it will not know to copy
the requisite libraries into the filesystem.
This is problematic as packages may perform their own checks [0] to find
out what the toolchain supports and builds will link against libraries
from the toolchain but will be missing dependencies in the filesystem.
Now, the support helpers alert the user when a toolchain supports a
language or library that has not been set in the Buildroot configuration.
Also, while we're here, add `-ffree-form` to the Fortran check to
suppress a meaningless warning.
[0]: https://bugs.busybox.net/show_bug.cgi?id=15634
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The fragments provided by toolchains.bootlin.com were incorrectly
flagging toolchains as not having OpenMP support while they had it
[0]. This has been fixed in toolchains.bootlin.com, so a run of
gen-bootlin-toolchains has allowed to adjust the toolchain definitions
in Buildroot, leading to this commit.
OpenMP support needs to be flagged so the proper libraries get copied
into the resultant filesystem to avoid missing dependencies [1].
[0]: https://github.com/bootlin/toolchains-builder/issues/60
[1]: https://bugs.busybox.net/show_bug.cgi?id=15634
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
check-package is verifying the alphabetic ordering of package names,
not directory, so package/llvm-project/clang/Config.in should be
sorted as "clang" and not "llvm-project".
Fixes:
package/Config.in:2130: Packages in: menu "Other",
are not alphabetically ordered;
correct order: '-', '_', digits, capitals, lowercase;
first incorrect package: clang
In:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4718833134
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since upstream Linux commit 6898e60f709b0047206110d3ec9f4612210e3ff7
("perf build: If libtraceevent isn't present error the build") present
in Linux 6.4 and newer, Linux will fail to build if libtraceevent is not
present. Since we do not currently have support for libtracevent in
buildroot, pass NO_LIBTRACEVENT=1 to get perf to build again.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
By default, module libraries have a suffix based on cpython version + host
architecture: this is fine for a native compile when these libraries are used on
the same computer (or similar computers). But when target architecture is not
the same python is unable to find libraries due to the wrong suffix and produces
unclear errors messages:
# python3
Python 3.11.3 (main, Jun 19 2023, 14:15:44) [GCC 11.4.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>> from gnuradio import blocks
Traceback (most recent call last):
File "/home/xxx/buildroot/output/build/gnuradio-3.10.4.0/gr-blocks/python/blocks/__init__.py", line 18, in <module>
ModuleNotFoundError: No module named 'gnuradio.blocks.blocks_python'
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/home/xxx/buildroot/output/build/gnuradio-3.10.4.0/gr-blocks/python/blocks/__init__.py", line 22, in <module>
ModuleNotFoundError: No module named 'gnuradio.blocks.blocks_python'
>>>
By adding _PYTHON_SYSCONFIGDATA_NAME="$(PKG_PYTHON_SYSCONFIGDATA_NAME)" at configure time, sysconfig will
return correct informations (target architecture) instead of host architecture.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adjust comments in the Go package to improve clarity:
Config.in.host:
- Add comment mentioning list of supported architectures.
go.mk:
- Reword comment re: copying src/ to host/
- the previously linked issue is not relevant.
- instead: mention that src/ is needed for stdlib.
- Adjust comment re: adjusting file timestamps.
- mention this is needed to avoid rebuilding stdlib
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Removed unneeded patches and replace them with an upstream commit.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The 6.3.x series is now EOL upstream, so drop the linux-headers option
and add legacy handling for it.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Following the bump of LLVM in commit
d8291fde5e ("package/llvm-project: bump
to version 15.0.3"), gcc >= 7.x is needed, so update the dependency of
BR2_PACKAGE_QT5TOOLS_QDOC_TOOL accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Add new build dependencies to lld and llvm
- Add host-gcc and gcc >= 7.x dependency since clang doesn't build with gcc 6.3
[ 28%] Building CXX object utils/TableGen/CMakeFiles/obj.clang-tblgen.dir/TableGen.cpp.o
output/build/host-clang-15.0.3/utils/TableGen/RISCVVEmitter.cpp: In instantiation of ‘{anonymous}::SemaSignatureTable::init(llvm::ArrayRef<{anonymous}::SemaRecord>)::<lambda(auto:2&)> [with auto:2 = const llvm::SmallVector<clang::RISCV::PrototypeDescriptor>]’:
/usr/include/c++/6/bits/stl_algo.h:3769:5: required from ‘_Funct std::for_each(_IIter, _IIter, _Funct) [with _IIter = std::_Rb_tree_const_iterator<llvm::SmallVector<clang::RISCV::PrototypeDescriptor> >; _Funct = {anonymous}::SemaSignatureTable::init(llvm::ArrayRef<{anonymous}::SemaRecord>)::<lambda(auto:2&)>]’
output/host/include/llvm/ADT/STLExtras.h:1611:23: required from ‘UnaryFunction llvm::for_each(R&&, UnaryFunction) [with R = std::set<llvm::SmallVector<clang::RISCV::PrototypeDescriptor>, {anonymous}::SemaSignatureTable::init(llvm::ArrayRef<{anonymous}::SemaRecord>)::Compare>&; UnaryFunction = {anonymous}::SemaSignatureTable::init(llvm::ArrayRef<{anonymous}::SemaRecord>)::<lambda(auto:2&)>]’
output/build/host-clang-15.0.3/utils/TableGen/RISCVVEmitter.cpp:249:64: required from here
output/build/host-clang-15.0.3/utils/TableGen/RISCVVEmitter.cpp:249:50: error: cannot call member function ‘void {anonymous}::SemaSignatureTable::insert(llvm::ArrayRef<clang::RISCV::PrototypeDescriptor>)’ without object
llvm::for_each(Signatures, [this](auto &Sig) { insert(Sig); });
^~~~~~
utils/TableGen/CMakeFiles/obj.clang-tblgen.dir/build.make:313: recipe for target 'utils/TableGen/CMakeFiles/obj.clang-tblgen.dir/RISCVVEmitter.cpp.o' failed
make[4]: *** [utils/TableGen/CMakeFiles/obj.clang-tblgen.dir/RISCVVEmitter.cpp.o] Error 1
Indeed LLVM_TEMPORARILY_ALLOW_OLD_TOOLCHAIN is OFF, the CheckCompilerVersion.cmake
trigger an error if gcc < 7.x. Indded since llvm 15 this option check for C++17 [1]
The last gcc 7.x version (7.5) has been released in 2019.
Fixing llvm/clang issues for old compiler maybe it's not worth it.
- Remove LLVM_TEMPORARILY_ALLOW_OLD_TOOLCHAIN since
gcc >= 7 is mendatory.
When updating LLVM, we also need to update the version of
SPIRV_LLVM_TRANSLATOR because its CMakeLists.txt verifies the LLVM
base version [2].
The patch
package/llvm/0002-Add-missing-cstdint-header-to-Signals.h.patch has
been included in tag llvmorg-15.0.0 of llvm-project.
[1] https://github.com/llvm/llvm-project/commit/4c72deb613d9d8838785b431facb3eb480fb2f51
[2] https://github.com/KhronosGroup/SPIRV-LLVM-Translator/blob/5be08b8bb91fc6ca62857792c177bc7479e5e3db/CMakeLists.txt#LL82C6-L82C6
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Tested-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To make version bumping easier, move libclc to a new llvm-project subfolder
and specify site for the project. Since the version of libclc is more
recent than the version specified in LLVM_PROJECT_VERSION, don't change
it for now until a later update.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Tested-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
"stages" is curently not defined in the .gitlab-ci.yml file,
so the default pipeline stages are:
.pre
build
test
deploy
.post
Since any jobs specify a stage, all jobs are assigned the "test"
stage [1]. All other stages defined by default are not used in the
gitlab-ci pipeline, they remain hidden.
In order to introduce a new custom stage, add the "test" stage
explicitely.
[1] https://docs.gitlab.com/ee/ci/yaml/#stages
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, emulator builtin binaries are downloaded after the rootfs
build by each tests running the emulator (Qemu) on armv5 or armv7.
Due to download quota on the server hosting theses binaries [1]
some GitLab jobs are failing due to "Connection reset by peer" [2]:
ConnectionResetError: [Errno 104] Connection reset by peer
In a follow up commit, we'll add the possibility to download only once
all emulator builtin binaries to pass them as build artifacts.
As such, we will need to make sure that run-tests only download theses
binaries, and that it does not run the testsuite.
Add such a mode, with a new option, --prepare-only.
[1] http://autobuild.buildroot.net/artefacts
[2] https://gitlab.com/buildroot.org/buildroot/-/jobs/4409032417
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
http://autobuild.buildroot.net/results/b85/b85b64162b3889d96c713030b46401e3e0a9a4e2/http://autobuild.buildroot.net/results/fea/fea92e9c2a87a317675a7d0610c2ee467a373b69/
Since the bump to 3.0.9 with buildroot commit
3c66f65a6a the configure script of
(host-)libopenssl needs the FindBin perl module on the host:
Can't locate IPC/Cmd.pm in @INC (you may need to install the IPC::Cmd
module) (@INC contains: /home/buildroot/autobuild/instance-1/output-1/
build/host-libopenssl-3.0.9/util/perl /home/buildroot/autobuild/instance
-1/output-1/host/lib/perl /usr/local/lib64/perl5/5.36 /usr/local/share/
perl5/5.36 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl
/usr/lib64/perl5 /usr/share/perl5 /home/buildroot/autobuild/instance-1/
output-1/build/host-libopenssl-3.0.9/external/perl/Text-Template-1.56/
lib) at /home/buildroot/autobuild/instance-1/output-1/build/host-lib
openssl-3.0.9/util/perl/OpenSSL/config.pm line 19.
BEGIN failed--compilation aborted at /home/buildroot/autobuild/instance
-1/output-1/build/host-libopenssl-3.0.9/util/perl/OpenSSL/config.pm line
19.
As this is needed for both libopenssl and host-libopenssl (which does not
have a corresponding config symbol in the .config), we have to require it
unconditionally.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rebase patches onto new version
Remove 0005-crypto-perlasm-ppc-xlate.pl-add-linux64v2-flavour.patch,
0006-Add-support-for-io_pgetevents_time64-syscall.patch, and
0007-Fixup-support-for-io_pgetevents_time64-syscall.patch as these are
already applied upstream
Updated license after switch to Apache license:
https://www.openssl.org/blog/blog/2021/06/17/OpenSSL3.0ReleaseCandidate/
[Bernd: fixed license file/hash]
Signed-off-by: Danny Wood <danny@rotronics.co.uk>
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
[Peter: update .checkpackageignore]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Build is broken:
"It seems that you are using `distutils.command.build` to add
new subcommands. Using `distutils` directly is considered deprecated,
please use `setuptools.command.build`.
By 2023-Dec-13, you need to update your project and remove deprecated
calls or your builds will no longer be supported."
The last commit for this package occured on May, 30th, 2016.
The last issue was opened Jan, 31st, 2017 and was unanswered.
Fixes:
http://autobuild.buildroot.net/results/b57/b571d7838950e0b5ca67106cbcd9ba61b4f04a48/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- update docs/license.rst hash (removed duplicated BSD-3-Clause and
reference to LICENSE.rst, removed Artwork and reference to
artwork/LICENSE.rst)
- add new runtime dependency on python-blinker
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While at it remove Glibc from the test name since all Timezone
now use a Glibc toolchain.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch updates the default toolchain used for runtime tests. The
last time this toolchain was updated was in commit
0207a65323 3 years ago. Since then,
multiple things have changed:
Firstly, it used uclibc-ng as the libc whereas since commit
4057e36ca9, glibc is used as the default
library.
And secondly, since commit 531b2a10cd, buildroot
dropped the support for gcc 8 and it cannot be built internally anymore.
So the testsuite was executed using a toolchain that can't be built by
the Buildroot internal toolchain backend anymore.
This new Bootlin toolchain stable 2022.08-1 is based on gcc 11.3.0,
linux headers 4.9.327, glibc 2.35 and binutils 2.38.
The previous toolchain bleeding edge 2018.11-1 is based on gcc 8.2.0,
linux headers 4.14.80, uclibc 1.0.30 and binutils 2.31.1
Nowadays Bootlin toolchains are packaged in Buildroot and we can
directly select them from BASIC_TOOLCHAIN_CONFIG and avoid
setting the toolchain parameters (BR2_TOOLCHAIN_EXTERNAL_CUSTOM...).
The switch to Glibc requires to update some tests for the following
reasons:
- TestPython3Py, TestPython3Pyc and TestPython3PyPyc has been updated
since they use the libc binary file name in their test
(uClibc: libc.so.1 vs Glibc: libc.so.6).
- TestTmux needs at least one locale to pass (as stated in tmux help
text "tmux needs a working UTF-8 locale"), so use "C.UTF-8".
- TestOpenSsh needs a toolchain >= 5.x due to a openssh issue
(Similar to: https://bugs.busybox.net/show_bug.cgi?id=13671)
Use the Bootlin toolchain bleeding-edge 2022.08-1 rhat provide
kernel headers 5.4
- TestShadow needs a toolchain >= 4.14
Use the Bootlin toolchain bleeding-edge 2022.08-1 rhat provide
kernel headers 5.4
Runtime tested on the gcc farm server.
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We are going to update the toolchain used by the Buildroot testsuite
and this update will break the kernel build with the Bootlin stable
toolchain due to an latent issue.
Fixes:
arch/x86/entry/thunk_64.o: warning: objtool: missing symbol table
make[4]: *** [scripts/Makefile.build:361: arch/x86/entry/thunk_64.o] Error 1
make[4]: *** Deleting file 'arch/x86/entry/thunk_64.o'
make[4]: *** Waiting for unfinished jobs....
[fixed since kernel 6.0]
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=de979c83574abf6e78f3fa65b716515c91b2613d
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We are going to update the toolchain used by the Buildroot testsuite
and this update will increase the size of the rootfs over 120M.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We are going to update the toolchain used by the Buildroot testsuite
and this update will increase the size of the rootfs over 120M.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We are going to update the toolchain used by the Buildroot testsuite
and this update will increase the size of the rootfs over 120M.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While the commit [1] already fixed some runtime issue with
uClibc toolchain, the same test TestPythonPy3Iptables fail
with Glibc toolchain.
xtables_version = 12
if xtables_version:
_searchlib = "libxtables.so.%s" % (xtables_version,)
else:
_searchlib = "xtables"
_lib_xtables, xtables_version = find_library(_searchlib)
_lib_xtables and xtables_version are null with glibc
The implementation of find_library() rely on the custom
_find_library() that try to use the IPTABLES_LIBDIR
environment variable (that does not exist in the context
of Buildroot).
Within the scope of buildroot we can determine what
IPTABLES_LIBDIR should be at build time and replace the
calls to os.environ.get('IPTABLES_LIBDIR', None) with
the correct value.
[1] d341ec0350
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
go1.19.11 (released 2023-07-11) includes a security fix to the net/http package,
as well as bug fixes to cgo, the cover tool, the go command, the runtime, and
the go/printer package.
CVE-2023-29406 and Go issue https://go.dev/issue/60374
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This new Bootlin toolchain stable 2022.08-1 is based on gcc 11.3.0,
linux headers 4.9.327, glibc 2.35 and binutils 2.38.
Nowadays Bootlin toolchains are packaged in Buildroot and we can
directly select them from BASIC_TOOLCHAIN_CONFIG and avoid
setting the toolchain parameters (BR2_TOOLCHAIN_EXTERNAL_CUSTOM...).
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Take the basename of the appended DTBs to workaround the following problem:
(cd .../arch/arm/boot; for dtb in cirrus/ep93xx-edb9302
do if test -e ${dtb}.dtb ; then dtbpath=${dtb}.dtb
else dtbpath=dts/${dtb}.dtb ; fi
cat zImage ${dtbpath} > zImage.${dtb} || exit 1; done)
/bin/sh: line 1: zImage.cirrus/ep93xx-edb9302: No such file or directory
Necessary to support ARM Linux starting from commit 724ba6751532
("ARM: dts: Move .dts files to vendor sub-directories"), i.e. Linux v6.4+.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure:
/tmp/ccw5V2Ti.s: Assembler messages:
/tmp/ccw5V2Ti.s:2013: Error: selected processor does not support `itt gt' in Thumb mode
/tmp/ccw5V2Ti.s:2014: Error: Thumb does not support conditional execution
/tmp/ccw5V2Ti.s:2015: Error: Thumb does not support conditional execution
/tmp/ccw5V2Ti.s:2017: Error: selected processor does not support `it le' in Thumb mode
/tmp/ccw5V2Ti.s:2018: Error: Thumb does not support conditional execution
/tmp/ccw5V2Ti.s:2020: Error: selected processor does not support `it gt' in Thumb mode
/tmp/ccw5V2Ti.s:2021: Error: Thumb does not support conditional execution
Fixes:
http://autobuild.buildroot.net/results/3fc/3fc68f756cf1661673941c411c4a2477e901e361/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a helper class providing a template for testing data
compressor and decompressor programs such as gzip, bzip2, xz...
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Build the am335x-bonegreen-wireless.dtb device tree.
The genimage script which is shared between beaglebone and
beaglebone_qt5 was updated to support the bonegreen-wireless.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Removal requested via email:
could you somehow please remove me as maintainer from this package.
I am since many years not using builtroot anymore and have no longer
systems with which I could do patch requests.
I am going into retirement.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Buildroot always enable largefile support in the toolchain, and thus
the associated definitions are always on. This leads to a problem in
unzip that on a 32-bit arch with these flags being passed in
-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
but the LARGE_FILE_SUPPORT define not being set will cause a size
mismatch on the comparison of the zipfiles:
$ unzip test.zip
Archive: test.zip
error: invalid zip file with overlapped components (possible zip bomb)
The simple solution is just enable LARGE_FILE_SUPPORT to enable large
file support. In order to avoid redefinition warnings, we undefine
_LARGEFILE_SOURCE and _LARGEFILE64_SOURCE.
Signed-off-by: Charles Hardin <ckhardin@gmail.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the selection of the ahab container images for the imx8dxl
asics. The initial support assumed these were imx8 but this is
actually the imx8x architecture as well. This was fixed when run on
the first tests against the imx8dxl SoCs.
Files from upstream:
mx8dxla0-ahab-container.img
mx8dxla1-ahab-container.img
mx8dxlb0-ahab-container.img
The B0 revision should be considered the latest
Signed-off-by: Charles Hardin <ckhardin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There was some imx SDMA firmware in the base linux-firmware package at
one time, but the firmware-imx is updated with the latest versions
from NXP releases.
This just ensures a dependency is set so that the firmware-imx package
will always come later in case an overlap occurs again.
Signed-off-by: Charles Hardin <ckhardin@gmail.com>
Reviewed-by: Gary Bisson <bisson.gary@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Needed for upcoming Kodi version 21.0-Omega.
Depends on the previous patch to fix build error on Coldfire.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The hash of the NOTICE file has changed due to:
- Update in copyright year
- Addition of a BSD-2-Clause license, so no change from that perspective
Signed-off-by: André Zwing <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Removed md5 hash.
Switch to new maintainer repo as indicated by metacpan.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Most rpi defconfigs use dtb overlays, but not rpi0 / rpi2 - Making it harder
to use overlays on those boards as the genimage files have to be tweaked.
To fix this, create the rpi-firmware/overlays directory in the post-build
script if needed and unconditionally include it in the genimage files so
rpi0/rpi2 works consistently with the other variants.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 0e82c360942907f5a2f379e64e0d211aaff80774 (and since release
2.10.1), a new variable called PYBIND11_PYTHONLIBS_OVERWRITE was introduced
and set to ON by default.
According to comment before this option:
"Overwrite cached values read from Python library (classic search). Turn off if
cross-compiling and manually setting these values."
In buildroot's context this option must be disabled to keep variables
provided by buildroot and lib/app.
Fixes:
- http://autobuild.buildroot.net/results/7423df5db5237d94bb49e32698828d4fe470e39b/
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Fixes uboot build errors:
In file included from tools/imagetool.h:24,
from tools/aisimage.c:7:
include/image.h:1383:12: fatal error: openssl/evp.h: No such file or directory
1383 | # include <openssl/evp.h>
|
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bumping libssh2 to 1.11.0 with buildroot commit
af87ad197c
causes build errors with libcurl due to "-R" being added to libssh2.pc.
Quoting autobuilder build-end.log
checking for recv... no
configure: error: Unable to link function recv
Quoting autobuilder libcurl-8.1.2/config.log
arc-buildroot-linux-uclibc-gcc.br_real: error: unrecognized command-line option '-R'
Fixes:
http://autobuild.buildroot.net/results/78f/78ffda92d51f8abdbcef93f968ace432d0d44979/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 3b2913552e (package/python-setuptools: add missing dependency on
host-python-wheel) adding the select of the runtime, as a last-minute
fixup.
However, there is no target python-wheel package; it is a host-only
package, leading to sainty-check failures:
$ make check-symbol
package/python-setuptools/Config.in:5: BR2_PACKAGE_PYTHON_WHEEL referenced but not defined
Srop the select. If there was a rationale for actually having
python-wheel on the target, it's going to need a bit more.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In the case of bluetooth audio thet incoming audio stream will be
coming from bluetooth devices at varying sample rates like (44.1, 48,
96, 192 kHz) and the odds of a sound device matching that samplerate
exactly is a bit slim. So in the case of a bluez audio playback the
system will need to do a samplerate conversion.
Thus when enabling bluez-alsa and the alsa plugins select libsamplerate
to support the shift from the incoming samplerates to an often fix-rated
audio device.
Signed-off-by: Charles Hardin <ckhardin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While migrating to pep517 build backend the host-python-wheel
dependency has been added to host-python-setuptools but
not to python-setuptools. Note that host-python-wheel is not really
needed during the build of (target) setuptools, but the setup.py script
checks if the dependency is present in the host directory.
To make everything consistent, add host-python-wheel as a build
dependency, and BR2_PACKAGE_PYTHON_WHEEL as a runtime dependency.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4537951715
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: James Hilliard <james.hilliard1@gmail.com>
[Arnout: also add runtime dependency on the target package.]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Now that 2.40.x has been added, that 2.39.x is the default version,
drop support for 2.37.x.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BR2_BINUTILS_GPROFNG was made available for known supported versions
only (binutils 2.39 at this point). As all new versions of binutils
support gprofng, it makes sense to invert the logic, and instead make
BR2_BINUTILS_GPROFNG not available with old binutils versions.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Use pidfile for more accurate process match
- Fix coding style issues to be able to drop a problem reported by
check-package on missing variables
Signed-off-by: Konstantin Menyaev <KAMenyaev@sberdevices.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Updated to gcc 12.2, gdb 12, binutils 2.39, glibc 2.36.
Upstream changed version scheme previously based on the release
date (2021.07) to a version scheme based on gcc version (12.2.rel1).
The runtime issue (Illegal instruction on some x86 host) [1] seems to
be fixed since it can't be reproduced anymore on the same host.
The x86_64 host variant prebuilt toolchain is built on RHEL7
(glibc 2.17) and is likely also be useable on OS versions like
RHEL8, Ubuntu 18.04 or later.
The AArch64 host variant prebuilt toolchain is built on Ubuntu 18.04
(glibc 2.27) is likely also be useable on OS versions like RHEL8,
Ubuntu 18.04 or later.
Use the sha256 hash that is now provided by upsteam.
[1] https://bugs.linaro.org/show_bug.cgi?id=5825#c19
[2] https://developer.arm.com/downloads/-/arm-gnu-toolchain-downloads
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Updated to gcc 12.2, gdb 12, binutils 2.39, glibc 2.36.
Upstream changed version scheme previously based on the release
date (2021.07) to a version scheme based on gcc version (12.2.rel1).
The runtime issue (Illegal instruction on some x86 host) [1] seems to
be fixed since it can't be reproduced anymore on the same host.
The x86_64 host variant prebuilt toolchain is built on RHEL7
(glibc 2.17) and is likely also be useable on OS versions like
RHEL8, Ubuntu 18.04 or later.
The AArch64 host variant prebuilt toolchain is built on Ubuntu 18.04
(glibc 2.27) is likely also be useable on OS versions like RHEL8,
Ubuntu 18.04 or later.
Use the sha256 hash that is now provided by upsteam.
Tested with qemu_aarch64_virt_defconfig.
[1] https://bugs.linaro.org/show_bug.cgi?id=5825#c19
[2] https://developer.arm.com/downloads/-/arm-gnu-toolchain-downloads
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Updated to gcc 12.2, gdb 12, binutils 2.39, glibc 2.36.
Upstream changed version scheme previously based on the release
date (2021.07) to a version scheme based on gcc version (12.2.rel1).
The runtime issue (Illegal instruction on some x86 host) [1] seems to
be fixed since it can't be reproduced anymore on the same host.
The x86_64 host variant prebuilt toolchain is built on RHEL7
(glibc 2.17) and is likely also be useable on OS versions like
RHEL8, Ubuntu 18.04 or later.
The AArch64 host variant prebuilt toolchain is built on Ubuntu 18.04
(glibc 2.27) is likely also be useable on OS versions like RHEL8,
Ubuntu 18.04 or later.
Use the sha256 hash that is now provided by upsteam.
Tested with qemu_arm_vexpress_defconfig.
[1] https://bugs.linaro.org/show_bug.cgi?id=5825#c19
[2] https://developer.arm.com/downloads/-/arm-gnu-toolchain-downloads
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is bugfix release of stable libmdbx branch,
on the day of international children's camp «Artek».
It is reasonable to backport this patch to all applicable releases/branches of Buildroot.
The most significant fixes of v0.12.7:
- added workaround for build issues with modern GCC using `-m32 -arch=i686 -Ofast`.
- fixed the cause of the false-positive warning of modern GCC in the C++ API.
- refined DB opening in "recovery" mode and switching to a given meta-page.
The complete ChangeLog: https://gitflic.ru/project/erthink/libmdbx/blob?file=ChangeLog.md
Signed-off-by: Леонид Юрьев (Leonid Yuriev) <leo@yuriev.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Move the comment out of the if-clause and include the python3 dependency
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BR2_riscv_custom should only contain the basic I extension. The A
extension should be optional and selected by board configs.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
BR2_RISCV_ISA_CUSTOM_RVA is currently not explicitly listed as it is
selected by BR2_riscv_custom. This looks confusing. Let's enable it.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
BR2_RISCV_ISA_CUSTOM_RVA is currently not explicitly listed as it is
selected by BR2_riscv_custom. This looks confusing. Let's enable it.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
With upstream commit ae2d9506a36c ("riscv: sifive: Rename fu540 board to unleashed")
in U-Boot v2021.07 release, the defconfig for SiFive Unleashed board
has been changed to sifive_unleashed_defconfig.
Also newer U-Boot has deprecated the usage of SPL_FIT_GENERATOR
to generate u-boot.itb hence there is no 'u-boot.itb' target in
the U-Boot Makefile anymore. Instead binman is used to assemble
the u-boot.itb image.
We will need to switch to BR2_TARGET_UBOOT_FORMAT_CUSTOM for
installing u-boot.itb.
Switch over to use the latest U-Boot v2023.04 release.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following security issues:
- CVE-2023-1916: A flaw was found in tiffcrop, a program distributed by the
libtiff package. A specially crafted tiff file can lead to an
out-of-bounds read in the extractImageSection function in
tools/tiffcrop.c, resulting in a denial of service and limited information
disclosure. This issue affects libtiff versions 4.x.
- CVE-2023-25434: libtiff 4.5.0 is vulnerable to Buffer Overflow via
extractContigSamplesBytes() at /libtiff/tools/tiffcrop.c:3215.
- CVE-2023-26965: loadImage() in tools/tiffcrop.c in LibTIFF through 4.5.0
has a heap-based use after free via a crafted TIFF image
Drop the now upstream
0001-tiffcrop-Correct-simple-copy-paste-error-Fix-488.patch.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 9d58b525fc the newline at the
end got accidentally removed. Commit
fd6b334269 re-added the newline, but
accidentally added an empty line as well. Remove the empty line.
Reported by check-package.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The alsa-utils will remove and create the /usr/share/alsa dir
as a whole and since the alsa plugins needs to add config into
this same directory it should come after those install steps.
Also, the bluez alsa needs the plugins installed to find them
during the configuration phases - so, interlock the plugins
when configured.
Signed-off-by: Charles Hardin <ckhardin@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
In commit 9d58b525fc the newline at the
end got accidentally removed. Re-add it.
Reported by check-package.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
libcgroup depends on fts API which is missing in musl and uClibc
and provided by musl-fts package.
This patch makes libcgroup dependent on musl-fts for
non-glibc configurations.
Signed-off-by: Oleg Lyovin <ovlevin@sberdevices.ru>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Fixes the following security issues:
- CVE-2023-34969: Fix an assertion failure in dbus-daemon when a privileged
Monitoring connection (dbus-monitor, busctl monitor, gdbus monitor or
similar) is active, and a message from the bus driver cannot be delivered
to a client connection due to <deny> rules or outgoing message quota.
This is a denial of service if triggered maliciously by a local attacker.
- Fix an incorrect assertion that could be used to crash dbus-daemon or
other users of DBusServer prior to authentication, if libdbus was compiled
with assertions enabled.
For details, see the NEWS file:
https://gitlab.freedesktop.org/dbus/dbus/blob/dbus-1.12/NEWS
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Right now there is a LICENSE file included in the package, so use it for
license validation.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Now that all dependencies of host-python-setuptools no longer
use setuptools as a build backend we can now migrate setuptools
itself to the pep517 build backend.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This will be required for upcoming setuptools pep517 support.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
We overrode the default in 4386bbdf08 to
work around target shebang bug, as this issue no longer appears to be
present lets revert back to the local version as this is what will be
use in the future when distutils is removed from the python stdlib.
Tested with:
$ support/testing/run-tests -d dl -o output_folder -k tests.package.test_ipython.TestIPythonPy3
15:43:26 TestIPythonPy3 Starting
15:43:27 TestIPythonPy3 Building
15:49:35 TestIPythonPy3 Building done
Downloading to /home/buildroot/buildroot/dl/tmp_iyk_fn6
Renaming from /home/buildroot/buildroot/dl/tmp_iyk_fn6 to /home/buildroot/buildroot/dl/kernel-versatile-5.10.7
Downloading to /home/buildroot/buildroot/dl/tmpokk23l2z
Renaming from /home/buildroot/buildroot/dl/tmpokk23l2z to /home/buildroot/buildroot/dl/versatile-pb-5.10.7.dtb
15:50:04 TestIPythonPy3 Cleaning up
.
----------------------------------------------------------------------
Ran 1 test in 398.709s
OK
$ head -n 1 output_folder/TestIPythonPy3/target/usr/bin/ipython
#!/usr/bin/python
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Other changes:
- Remove 0002-plc-plc.h-fix-build-with-gcc-10.patch as
related MR https://github.com/qca/open-plc-utils/pull/141
has been merged.
Notable changes since last version:
- Drop privileges after opening the channel file descriptor
- Remove all checks for root permissions
- Add chip identification for QCA7006AQ
Signed-off-by: Kai Stuhlemmer (ebee Engineering) <kai.stuhlemmer@ebee.de>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Currently there is no explicit way to enable/disable the adaptivedemux2
plugin. Create a menu entry allowing users to disable or enable the plugin,
like we have for other features.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[yann.morin.1998@free.fr: use plugin name in prompt, drop useless help]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Select BR2_TARGET_UBOOT_NEEDS_OPENSSL to fix the following
build error:
include/image.h:1383:12: fatal error: openssl/evp.h: No such file or directory
Reported-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update 002-vc4-add-meson-option-to-disable-optional-neon-suppor.patch to
fix an syntax error introduced by commit 'package/{mesa3d, mesa3d-headers}:
bump version to 23.1.0' ([1])
Fixes:
.../build/mesa3d-23.1.2/src/gallium/drivers/vc4/meson.build:87:76: ERROR:
Trying to compare values of different types (UserFeatureOption, str) using !=.
This was deprecated and undefined behavior previously and is as of 0.60.0 a hard error.
[1] https://git.buildroot.net/buildroot/commit/?id=e6203db11ed40122a2d9f29012db5683a7eb10d0
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
E-mails are bouncing:
<jose.pekkarinen@unikie.com>: host ASPMX.L.GOOGLE.com[74.125.133.26] said:
550-5.1.1 The email account that you tried to reach does not exist. Please
try 550-5.1.1 double-checking the recipient's email address for typos or
550-5.1.1 unnecessary spaces. Learn more at 550 5.1.1
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 0b9efc991f ("linux: use BR2_MAKE") switched LINUX_MAKE to
$(BR2_MAKE). However, this also implicitly sets LINUX_KCONFIG_MAKE.
Thus, when host-make is being used in a build that has
PER_PACKAGE_DIRECTORIES enabled, the dotconfig step will try to use the
make instance from the host directory, but since it is not listed in
LINUX_KCONFIG_DEPENDENCIES, it won't be available yet at that point in
time.
Add an explicit dependency to LINUX_KCONFIG_DEPENDENCIES to have it
copied over early enough.
Signed-off-by: Florian Larysch <fl@n621.de>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Fixes the following security issues:
- CVE-2023-32067: High. 0-byte UDP payload causes Denial of Service
- CVE-2023-31147 Moderate. Insufficient randomness in generation of DNS
query IDs
- CVE-2023-31130. Moderate. Buffer Underwrite in ares_inet_net_pton()
- CVE-2023-31124. Low. AutoTools does not set CARES_RANDOM_FILE during
cross compilation
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The autoconf-build system fails to properly detect vsnprintf
checking for vsnprintf... yes
checking whether vsnprintf is C99 compliant... no
which leads to a build error
snprintf.c:495:1: error: inlining failed in call to 'always_inline'
'rpl_vsnprintf.localalias': function not inlinable
Building with cmake fixes the problem:
-- Looking for vsnprintf
-- Looking for vsnprintf - found
The cmake build system has an option to disable checkmk, so we don't
need to remove it from target anymore.
Fixes:
http://autobuild.buildroot.net/results/e55/e5562513226de902dae642526165b1555a540144/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
hwdata provides a .pc file, which other packages can look up to find the
location where hwdata files are, and use them at build time.
This is the case for the upcoming libdisplay-info package, which
requires the hwdata's PNP IDs at build time.
However, installing the .pc file is not enough. Indeed, meson (which
libdisplay-info uses) will look for the corresponding data files in
datadir, which it locates relative to the sysroot, which is our staging.
So, we also need to install the hwdata files in staging.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Upstream ChageLog, summary:
- Add wildcard support for Cloudflare
- New DDNS providers from DD-WRT;
- goip.de
- myonlineportal.net
- desec.io (a.k.a. dedyn.io)
- domaindiscount24.com
- dy.fi
- do.de (Domain-Offensive)
- Domopoli.de
- inwx
- It's DNS
- Joker.com
- all-inkl.com
- core-networks.de
- dnsever.com
- dnshome.de
- dnsmadeeasy.com
- dnsmax.com
- schokokeks.org
- variomedia.de
- udmedia.de
- moniker.com
- dyndns.it
- infomaniak.com
- oray.com
- simply.com
- mydns.jp
- myonlineportal.net
- namecheap.com
- regfish.de
- twodns.de
- Support for updating both ipv4 and ipv6 address for same provider
- Add new command line options -L and -S NAME to list supported
providers and their respective details
- Add 'success' as a valid generic response to DNS update
- Fix use after free in logger at inadyn exit
- Use dynv6 'auto' IP only if we have not detected an address
- Replace unstable api.ipify.org with http://ifconfig.me
- Fix default checkip server for dnsexit.com
- Fix easydns response code problem
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Drop no longer required host-python-setuptools-scm and
host-python-toml dependencies.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Removed md5 hash, switched _SITE to https.
Updated license hash due to copyright year bump.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rebased two patches.
Changelog:
https://docs.python.org/release/3.11.4/whatsnew/changelog.html#python-3-11-4
Fixes the following security problems:
- gh-99889: Fixed a security in flaw in uu.decode() that could allow for
directory traversal based on the input if no out_file was specified.
- gh-104049: Do not expose the local on-disk location in directory
indexes produced by http.client.SimpleHTTPRequestHandler.
- gh-102153: urllib.parse.urlsplit() now strips leading C0 control and
space characters following the specification for URLs defined by WHATWG
in response to CVE-2023-24329. Patch by Illia Volochii.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Python-docker needs a working docker setup to do anything useful, so add it
to the existing docker_compose (which tests docker and docker-compose)
rather than adding a completely new test.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit d680db0ba7 (package/python-docker: bump to version 6.0.1) forgot
to add the new dependency on python-packaging, leading to runtime errors:
import docker
File "/usr/lib/python3.11/site-packages/docker/__init__.py", line 2, in <module>
File "/usr/lib/python3.11/site-packages/docker/api/__init__.py", line 2, in <module>
File "/usr/lib/python3.11/site-packages/docker/api/client.py", line 10, in <module>
File "/usr/lib/python3.11/site-packages/docker/auth.py", line 7, in <module>
File "/usr/lib/python3.11/site-packages/docker/utils/__init__.py", line 3, in <module>
File "/usr/lib/python3.11/site-packages/docker/utils/decorators.py", line 4, in <module>
File "/usr/lib/python3.11/site-packages/docker/utils/utils.py", line 9, in <module>
ModuleNotFoundError: No module named 'packaging'
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
defconfig fragment to reproduce the issue:
BR2_PACKAGE_QEMU_ARCH_SUPPORTS_TARGET=y
BR2_PACKAGE_QEMU=y
BR2_PACKAGE_QEMU_SYSTEM=y
ERROR: Problem encountered: fdt not available but required by targets
aarch64-softmmu, arm-softmmu, i386-softmmu, loongarch64-softmmu,
microblaze-softmmu, microblazeel-softmmu, mips64el-softmmu,
nios2-softmmu, or1k-softmmu, ppc-softmmu, ppc64-softmmu,
riscv32-softmmu, riscv64-softmmu, rx-softmmu, x86_64-softmmu
Commit [1] select BR2_PACKAGE_QEMU_FDT for each individual emulator targets
but forgot to select is when BR2_PACKAGE_QEMU_CHOOSE_TARGETS is not set
(building for all targets).
Fixes:
http://autobuild.buildroot.org/results/e44/e444a02b899d325a9d99daed96b8cb96108383e7
[1] 44be514b21
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Carlos Santos <unixmania@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop local patch that has been upstreamed but add a new one to fix build
failure:
../meson.build:180:12: ERROR: Can not run test applications in this
cross environment.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
1.3.39:
- oss-fuzz: Several security fixes originating from oss-fuzz testing.
- ALL: Replace strcpy() with strlcpy(), replace strcat() with strlcat(),
replace sprintf() with snprintf(). Prefer using bounded string functions.
This change is made for the purpose of increasing safety than to address
any existing demonstrated concern.
1.3.40:
- DCX: Fixed heap overflow when writing more than 1023 scenes, and also
eliminated use of uninitialized memory.
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
[Peter: mark as security fix, extend commit message]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/293/2936d9b054269b7055e66ab5a7f7c1f7f4926d48/
Bootgen embeds an old version of flex, but uses the system include syntax
(#include <>) to reference it, causing conflicts on systems with the
development headers for a modern flex version installed, leading to build
issues like:
../bisonflex/cmdoptions.yy.cpp: In member function 'virtual int CO::FlexScanner::yylex()':
../bisonflex/cmdoptions.yy.cpp:1362:18: error: no match for 'operator=' (operand types are 'std::istream' {aka 'std::basic_istream<char>'} and 'std::istream*' {aka 'std::basic_istream<char>*'})
Fix it by using normal local includes (#include "") instead.
Notice: This was already fixed on master, but the cmdoptions.yy.cpp and
reginit.yy.cpp hunks were accidentally dropped when the changes were
squashed for the 2023.1 release.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
And restore support for MIPS64, which is supported by Lightning.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since version 3.2.0, libwebsockets does not compile its external loop
support code anymore. That code was put under LWS_WITH_EXTERNAL_POLL
compile option, which defaults to OFF.
Applications relying on that support need to turn that option on, so
let's add it to the package.
For example, when libwebsockets is enabled, mosquitto broker is built
with websocket support, but its code requires LWS_WITH_EXTERNAL_POLL
to be on, otherwise it gives compile-time warning hinting to unusable
websocket support:
https://github.com/eclipse/mosquitto/commit/1b24f625ea4ee77f3c4796ec2233d059f8c7977e
Signed-off-by: Luca Pesce <luca.pesce@vimar.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch bumps the zynq_zed_defconfig to xilinx-v2023.1 which includes
the following updates:
- Linux v6.1.5
- U-Boot v2023.01
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynq_microzed_defconfig to xilinx-v2023.1 which includes
the following updates:
- Linux v6.1.5
- U-Boot v2023.01
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynq_zc706_defconfig to xilinx-v2023.1 which includes
the following updates:
- Linux v6.1.5
- U-Boot v2023.01
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps bootgen to version xilinx_v2023.1.
The patch for build machines with modern flex is no longer needed.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2023-05-16 16:48:25 +02:00
3229 changed files with 45597 additions and 25037 deletions
From 2618a0dae09ef37728dab89ff60418cbe25ae6bd Mon Sep 17 00:00:00 2001
From: Kees Cook <keescook@chromium.org>
Date: Sat, 12 Feb 2022 09:14:49 -0800
Subject: etherdevice: Adjust ether_addr* prototypes to silence
-Wstringop-overead
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
With GCC 12, -Wstringop-overread was warning about an implicit cast from
char[6] to char[8]. However, the extra 2 bytes are always thrown away,
alignment doesn't matter, and the risk of hitting the edge of unallocated
memory has been accepted, so this prototype can just be converted to a
regular char *. Silences:
net/core/dev.c: In function ‘bpf_prog_run_generic_xdp’: net/core/dev.c:4618:21: warning: ‘ether_addr_equal_64bits’ reading 8 bytes from a region of size 6 [-Wstringop-overread]
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Peter Korsgaard