Add a defconfig for the Allwinner Nezha, a raspberrypi-style board built
around the RISC-V 64bit D1 SoC.
There is currently no upstream support, so use the git repos from Samuel
Holland as explained on the linux-sunxi wiki:
https://linux-sunxi.org/Allwinner_Nezha
The U-Boot DTB is also used by opensbi, but the two branches are
unfortunately not in sync at the moment, so add a patch to fix the
compatible for the PLIC so opensbi makes it available to S-Mode (Linux).
The use of the sun20i-d1-spl SPL bootloader / TOC1 file format also makes it
a bit more complicated to build the boot image. As this is expected to only
be a temporary issue, add a U-Boot patch to build the TOC1 image as part of
the build rather than adding explicit support in our U-Boot package to do
it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
U-Boot does not yet have SPL code to initialize the DDR controller on the
Allwinner D1 - So instead package the sun20i-d1-spl bootloader, which is
based on boot0 from the Allwinner BSP with some modifications to build it
separately from the BSP and boot mainline U-Boot as explained on the
linux-sunxi wiki:
https://linux-sunxi.org/Allwinner_Nezha
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For an unknown reason, the following build failure is raised on one of
the autobuilder with host gcc 6.3.0 since bump of autoconf to version
2.71 in commit ecd54b65c1:
icall.c: In function 'mono_create_icall_signatures':
icall.c:9513:20: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
gsize_a *types = (gsize*)(sig + 1);
^
Add an upstream patch to fix it.
Fixes:
- http://autobuild.buildroot.org/results/1d1d82b505abd16d014d754b6a4a48fb1271e3b6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
softhsm2 needs threads since the addition of the package in commit
53873b6dae to avoid the following build
failure:
osmutex.cpp:240:2: error: #error "There are no mutex implementations for your operating system yet"
240 | #error "There are no mutex implementations for your operating system yet"
| ^~~~~
While at it, fix a typo in comment
Fixes:
- http://autobuild.buildroot.org/results/40a8c2d9f58fbe490b6832754fdf8ac4ee0804fc
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised since the addition of the package
in commit 53873b6dae:
OSSLDES.cpp: In member function 'virtual const EVP_CIPHER* OSSLDES::getCipher() const':
OSSLDES.cpp:81:12: error: 'EVP_des_cbc' was not declared in this scope; did you mean 'EVP_sm4_cbc'?
81 | return EVP_des_cbc();
| ^~~~~~~~~~~
| EVP_sm4_cbc
Fixes:
- http://autobuild.buildroot.org/results/27d471c4ad1cdd5f2332b949f71cba86723d349f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.org/results/eab44622f8d8ff4fbf464b5a98856382f019c2cb/
Since the bump to 3.1.0 in commit 470e2e9bc5 (package/tpm2-tss: bump
version to 3.1.0), the install is borked because it is looking for
programs at configure time, so it finds those on the host if they exist,
or do not find any at all, which can very well differ from what will be
present on the target.
But this is not totally unreasonable: there is no way, at cross-configure
time, for a package to find the tools that will be present at runtime.
All that can be done in such a case is to force the path to such tools.
However, in this case, tpm2-tss only uses setfacl if systemd-tmpfiles is
not available. If the call to setfacl fails, the install does not fail
(split on two lines for readability):
@-$(call make_fapi_dirs) && $(call set_fapi_permissions) \
|| echo "WARNING Failed to create the FAPI directories with the correct permissions"
set_fapi_permissions is a macro that eventually expands to:
(chown -R tss:tss "$1") && \
(chmod -R 2775 "$1") && \
(setfacl -m default:group:tss:rwx "$1")
So the call to setfacl will not even be ever attempted, because the
chown will fail first. Furthermore, it would look for the 'tss' username
and groupname from the host, which could differ from those on the
target.
So we can just fake the fact that setfacl is available.
As for the permissions, they are to be set on a directory that is in
${runstatedir}, i.e. /run, which is a tmpfs, so there is no way we can
prepare them at build time. We'd need a startup script or systemd unit,
or proper systemd-tmpfiles support, either of which can be done in a
followup patch by an interested party...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Yair Ben-Avraham <yairba@protonmail.com>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
According to buildroot requirements set custom uboot
version instead of relying on the newest one.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure raised since bump to version 0.3.39 in
commit d9796f2db9:
In file included from /home/giuliobenetti/autobuild/run/instance-1/output-1/host/powerpc-buildroot-linux-uclibc/sysroot/usr/include/signal.h:318,
from ../spa/include/spa/utils/defs.h:34,
from ../spa/include/spa/utils/type.h:32,
from ../spa/include/spa/support/log.h:34,
from ../spa/plugins/support/cpu.c:37:
../spa/plugins/support/cpu.c: In function 'impl_init':
../spa/plugins/support/cpu.c:88:33: error: called object is not a function or function pointer
88 | #define impl_cpu_zero_denormals NULL
| ^~~~
Fixes:
- http://autobuild.buildroot.org/results/eaf255c46b10cbb6b8a629bc15acf7772d5e274b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This option only exists in main and is not in a release.
Fixes:
output/build/weston-9.0.0/meson.build:1:0: ERROR: Unknown options: "launcher-libseat"
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This package is the userspace daemon, client tool, and library for the
team device implementation in the Linux kernel. Team is an alternative
to the traditional bonding driver and provides more "runners", or modes,
of operation for aggregates. None of these modes are enabled by default
and need a custom kernel config.
Backported the three most relevant patches to fix musl build, revert of
a fix prior to 1.31 that can cause high CPU load, and a fix to prevent
failing to stop the daemon due to too short timeout for kill command.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
[yann.morin.1998@free.fr: slight reword in help text]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump U-Boot to 2021.10 and kernel to version 5.14.14.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop arm fix patch that is now upstream.
Dbus is now an optional dependency for pipewire.
Add pipewire-v4l2 config option.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Based on initial work from Nicolas Carrier
<nicolas.carrier@orolia.com>, with the following additions:
- Updated to a newer version
- Added proper license file handling
- Added runtime test case
- Restricted to Python 3.x
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
dahdi-linux needs a linux with CRC CCITT since the addition of the
package in commit d959966b41 as stated in
the README:
- CONFIG_CRC_CCITT must be enabled ('y' or 'm'). On 2.6 kernels this can
be selected These can be selected from the "Library Routines" submenu
during kernel configuration via "make menuconfig".
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2021-40114: Multiple Cisco products are affected by a
vulnerability in the way the Snort detection engine processes ICMP
traffic that could allow an unauthenticated, remote attacker to cause a
denial of service (DoS) condition on an affected device. The
vulnerability is due to improper memory resource management while the
Snort detection engine is processing ICMP packets. An attacker could
exploit this vulnerability by sending a series of ICMP packets through
an affected device. A successful exploit could allow the attacker to
exhaust resources on the affected device, causing the device to reload.
https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-snort-dos-s2R7W9UUhttps://www.snort.org/downloads/snort/changelog_2.9.18.1.txt
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
OpenJDK 17 is a new LTS release, which leaves the Buildroot Config option of
"LTS" and "LATEST" as a misnomer because both 11 and 17 are LTS releases.
There are two options in this case:
1) Remove "LATEST" and update OpenJDK 11 to 17, and only support 17.
2) Change "LTS" to "11" and "LATEST" to "17" and only support the latest 2 LTS
OpenJDK releases.
After some discussion with Thomas Petazzoni and Peter Korsgaard, and testing,
option 2 is the best course of action for a few reasons:
- OpenJDK 11 and 17 have very long support cycles:
- OpenJDK 11 has two years of Active and five years of security support left.
- OpenJDK 17 has five years of Active and ten years of security support left.
- Both OpenJDK versions build with the same parameters.
- The maintenance cost of both versions is meager.
- Both versions pass tests.package.test_openjdk without issue.
Changes:
- Change BR2_OPENJDK_VERSION_LATEST -> BR2_OPENJDK_VERSION_17
- Change BR2_OPENJDK_VERSION_LTS -> BR2_OPENJDK_VERSION_11
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Peter: add Config.in.legacy, use BR2_PACKAGE_OPENJDK_ prefix]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go1.17.3 (released 2021-11-04) includes security fixes to the archive/zip and
debug/macho packages, as well as bug fixes to the compiler, linker, runtime, the
go command, the misc/wasm directory, and to the net/http and syscall packages.
https://golang.org/doc/devel/release#go1.17.minor
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised since bump of autoconf to version
2.71 in commit ecd54b65c1 and
http://git.savannah.gnu.org/gitweb/?p=autoconf.git;a=commit;h=ec90049dfcf4538750e61d675d885157fa5ca7f8:
checking for /home/buildroot/autobuild/instance-0/output-1/host/bin/mips-linux-gnu-gcc options needed to detect all undeclared functions... cannot detect
configure: error: in `/home/buildroot/autobuild/instance-0/output-1/build/boinc-7.16.18':
configure: error: cannot make /home/buildroot/autobuild/instance-0/output-1/host/bin/mips-linux-gnu-gcc report undeclared builtins
This error raised because AC_CHECK_DECLS returns an error due to -mavx
flag:
mips-linux-gnu-gcc: error: unrecognized command line option '-mavx'
To fix this build failure, hard code ac_cv_c_undeclared_builtin_options
to 'none needed' as removing '-mavx' from CPPFLAGS will hinder the
detection of xgetbv, xgetbv, __xgetbv, cpuid, _cpuid and __cpuid
Fixes:
- http://autobuild.buildroot.org/results/4b468a5d3bfbff9638316ca930ef791867774aef
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the wrong assumption that six is not a dependency with python3 made
in commit 95a63a34ac to avoid the
following build failure with ca-certificates:
Traceback (most recent call last):
File "/home/buildroot/autobuild/instance-2/output-1/build/ca-certificates-20211016/mozilla/certdata2pem.py", line 31, in <module>
from cryptography import x509
File "/home/buildroot/autobuild/instance-2/output-1/host/lib/python3.9/site-packages/cryptography/x509/__init__.py", line 7, in <module>
from cryptography.x509 import certificate_transparency
File "/home/buildroot/autobuild/instance-2/output-1/host/lib/python3.9/site-packages/cryptography/x509/certificate_transparency.py", line 10, in <module>
import six
ModuleNotFoundError: No module named 'six'
Fixes:
- http://autobuild.buildroot.org/results/2b6872eec31362bf3edf88c69b67d681b2f016aa
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: James Hilliard <james.hilliard1@gmail.com>
Tested-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
His e-mail is no longer responding:
** Address not found **
Your message wasn't delivered to mirza.krak@northern.tech because the address couldn't be found, or is unable to receive mail.
Learn more here: https://support.google.com/mail/?p=NoSuchUser
The response from the remote server was:
550 5.1.1 The email account that you tried to reach does not exist. Please try double-checking the recipient's email address for typos or unnecessary spaces. Learn more at https://support.google.com/mail/?p=NoSuchUser bi21si292758edb.0 - gsmtp
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Build of nano with uclibc < 1.0.35 is broken since bump to version 5.9
in commit 3e62e9b14b:
In file included from ./sys/random.h:40,
from getrandom.c:22:
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/x86_64-buildroot-linux-uclibc/sysroot/usr/include/sys/random.h:27:35: error: unknown type name 'size_t'
27 | extern int getrandom(void *__buf, size_t count, unsigned int flags)
| ^~~~~~
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/x86_64-buildroot-linux-uclibc/sysroot/usr/include/sys/random.h:8:1: note: 'size_t' is defined in header '<stddef.h>'; did you forget to '#include <stddef.h>'?
7 | #include <features.h>
+++ |+#include <stddef.h>
8 |
Fixes:
- http://autobuild.buildroot.org/results/1932c524aa6b6a3337a0fc21b44adaac60972d30
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
p11-kit is an optional dependency which is enabled by default since the
addition of the package in commit
53873b6dae and softhsm2 needs help to
properly install files:
/usr/bin/install -c -m 644 softhsm2.module '/home/buildroot/autobuild/instance-0/output-1/host/nios2-buildroot-linux-gnu/sysroot/home/buildroot/autobuild/instance-0/output-1/host/bin/../nios2-buildroot-linux-gnu/sysroot/usr/share/p11-kit/modules'
[...]
softhsm2: installs files in /home/buildroot/autobuild/instance-0/output-1/host/nios2-buildroot-linux-gnu/sysroot//home/buildroot/autobuild/instance-0/output-1
package/pkg-generic.mk:330: recipe for target '/home/buildroot/autobuild/instance-0/output-1/build/softhsm2-2.6.1/.stamp_staging_installed' failed
Fixes:
- http://autobuild.buildroot.org/results/a05bb71cfe016f793c89b2a035835718836039c8
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Upstream has .sha256 checksums now, drop redundant .md5
- Upstream has dropped RSRR support, drop Config.in support
- Add BR2_PACKAGE_MROUTED_RSRR to Config.in.legacy
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add firmware for Realtek 8152/8153/8156 based USB Ethernet adapters.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Other changes:
- Drop depends on !BR2_PACKAGE_UBOOT_TOOLS_FWPRINTENV as mender-grubenv no
longer uses fw_printenv and fw_setenv and instead provides
grub-mender-grubenv-print and grub-mender-grubenv-set
- Update the LICENSE hash as the year has changed.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Other changes:
- Update license files hash due to the progressbar library changing versions
from v0.0.2 to v0.0.3
- Remove HOST_MENDER_ARTIFACT_BUILD_TARGETS = cli/mender-artifact as
commit a79edc3e7632f38de0dfeaa5a3c72567318e8079 removed the
cli/mender-artifact directory.
- Change -X main.Version= to
-X github.com/mendersoftware/mender-artifact/cli.Version
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This file adds a DBus endpoint for the UpdateControlMap, which allows a user
to set the ID and Priority of a given update process
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add Giulio Benetti to all Olimex Allwinner boards' defconfigs since I've
recently updated and tested them all and I'd like to receive possible
build failure from gitlab CI/CD.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since I'm the upstream maintainer, it'd be nice to get Cc:ed on any
issues with the package.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Change the comment so it doesn't need to be updated when changing the
version.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BLK_DEV_IDE_PMAC driver has been removed from the kernel, so use the
libata replacement PATA_MACIO. This requires enabling ATA and BLK_DEV_SD
for the disk to show up, and changing the command line to use /dev/sda.
YENTA depends on PCCARD, so enable it.
The UART does not show up in /dev without DEVTMPFS.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit
40bb37bd70 ("utils/getdeveloperlib.py:
use relative paths for files"), the Developer class was changed to use
relative paths, including for its .hasfile() method.
However the check_developers() function of getdeveloperlib.py was not
updated accordingly, and continued to pass absolute paths. This caused
"get-developers -c" to return the entire list of files in Buildroot as
being unmaintained, as none of them were matching the file listed in
the DEVELOPERS file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In Python 3.x, check_output() returns a "bytes" array, and not a
string. Its result needs to be decoded to be turned into a
string. Without this fix, "get-developers -c" bails out with:
Traceback (most recent call last):
File "/home/thomas/projets/buildroot/./utils/get-developers", line 105, in <module>
__main__()
File "/home/thomas/projets/buildroot/./utils/get-developers", line 53, in __main__
files = getdeveloperlib.check_developers(devs)
File "/home/thomas/projets/buildroot/utils/getdeveloperlib.py", line 280, in check_developers
files = subprocess.check_output(cmd).strip().split("\n")
TypeError: a bytes-like object is required, not 'str'
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues:
- CVE-2021-25219: Lame cache can be abused to severely degrade resolver
performance
For details, see the advisory:
https://kb.isc.org/docs/cve-2021-25219
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This option is only available in master and not any release.
Fixes:
output/build/libpsl-0.21.1/meson.build:1:0: ERROR: Unknown options: "docs"
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Acked-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add configuration switch BR2_PACKAGE_OPTEE_CLIENT_RPMB_EMU to define
whether RPMB emulation is enabled or not. It is default enabled for
backward compatibility.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Restore support for BR2_STATIC_LIBS in optee-client, removed by
[1] to overcome an issue introduced in OP-TEE 3.13.0 that mandates
support for shared libraries.
As OP-TEE expects to be functional on OSes without dynamic shared
library support, change [2] was merged in OP-TEE tag 3.15.0 to fix the
initial issue introducing new configuration switch CFG_TEE_SUPP_PLUGIN.
When disabled, optee-client plugin support is not embedded and
optee-client can built with static libraries support only.
Link: [1] commit 321a850bc7 ("package/optee-client: add dependency on !BR2_STATIC_LIBS")
Link: [2] https://github.com/OP-TEE/optee_client/commit/f59114370f267f0b3341870b6cf1e1c88d184b3f
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Remove efi-ldsdir meson config option which is no longer used.
Meson config variable systemd-analyze is renamed to analyze.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Remove python3-requests host package and combine with python-requests.
Make packages depending on host-python3-requests depend on
host-python-requests instead.
Drop idna patch that is now upstream.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch adds support for watchdogd, a watchdog daemon with built-in
process supervisor[1] as well as support for monitoring memory & file
descriptor leaks, and CPU load average. When a monitored resource
reaches a high watermark, a warning message is logged and when critical
level is reached, the cause is saved and the system is rebooted. On
reboot the reset cause can be retrieved to help locate the culprit.
Support for SysV init script in this patch, and systemd unit file is
installed from the one bundled with the package. Both files supoort
additional command line options in /etc/default/watchdogd.
The Config.in is slightly big, but allows for disabling or adjusting
the poll interval for each resource monitor.
For more information, see https://github.com/troglobit/watchdogd
[1]: processes must have their main loop instrumented for supervision.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The current documentation was poorly organized, with for example the
"Here is an example walk through of running a test case" sentence
followed by the explanation of how to list available test cases, but
not how to run one.
Many other aspects of the wording were confusing, or not really
accurate.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The directory that containts tests is "support/testing/tests/", not
"supporting/testing/test".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The current Gitlab CI mechanism allows to trigger all tests in a CI
pipeline by pushing a branch named <something>-runtime-tests, or to
trigger a single test in a CI pipeline by pushing a branch name
<something>-tests.<name of test>.
However, there are cases where it is useful to run a suite of tests,
for example to run all tests in tests.init.test_busybox.
This commit makes that possible by extending the current semantic of
<something>-tests.<name of test> to not expect a complete test name,
but instead to accept all tests that starts with the given pattern.
This allows to do:
git push gitlab HEAD:foobar-tests.init.test_busybox.TestInitSystemBusyboxRo
like it was the case before. But it now also allows to do:
git push gitlab HEAD:foobar-tests.init.test_busybox
to run all Busybox tests.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
kmscube requires a libgbm implementation, which until now, only Mesa3D
was providing, so kmscube had a direct dependency on Mesa3D.
However, now that we have a proper libgbm virtual package, so this
commit converts the kmscube package to use the libegl, libgbm and
libgles virtual packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
[ Kamel : add dependency on recent libgbm ]
[Arnout: fix syntax of Config.in comment; order depends alphabetically]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Introduce gbm features so that each packages depending
on it can choose which implementation is required.
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since 18.0-Leia, Kodi implements stand-alone gbm support alongside x11 &
wayland. To enable building libgbm in mesa3d without x11 & wayland we
need to create a virtual package for libgbm.
Also other packages besides mesa3d may provide libgbm.so, see
http://patchwork.ozlabs.org/patch/647235/http://patchwork.ozlabs.org/patch/939703/
It turns out that libgbm has seen several additions in its API over
time, and therefore not all libgbm implementations provide support for
all features. In order to account for this, this commit adds two hidden
boolean options that allow libgbm providers to indicate which optional
features they support:
BR2_PACKAGE_LIBGBM_HAS_FEATURE_FORMAT_MODIFIER_PLANE_COUNT and
BR2_PACKAGE_LIBGBM_HAS_FEATURE_DMA_BUF. These booleans must be selected
by the packages providing libgbm implementations, and depended on by
packages using libgbm.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
[ Kamel : introduce gbm api features ]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Linux supports No-MMU RISC-V 64-bits since kernel version 5.8. Make
MMU optional to enable building for RISC-V 64-bits boards that do not
have one. MMU use of RISC-V 32-bits builds remains mandatory for now.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using *-uclinux-* seems like an only partially followed convention.
And at least RISC-V 64-bits gcc does not know about uclinux tuples.
So switch back to the normal "linux" one for now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[Damien]
* Make the change conditional on BR2_RISCV_64 being "y".
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enable selecting elf2flt for RISC-V 64-bits no MMU builds and add
support for it in the form of an additional patch (upstream pull request
https://github.com/uclinux-dev/elf2flt/pull/22).
Also modify the package Makefile.in file to add the -fPIC option to
the target CFLAGS for RISC-V 64-bits no MMU builds.
This patch is based on initial work by Christoph Hellwig <hch@lst.de>.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When BR2_BINFMT_FLAT_ONE is selected, elf2flt must be invoked with the
"-r" option to ensure that a single contiguous binary image is created,
regardless of the architecture default image format implemented by
elf2flt.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch adds a package for softhsm2.
Signed-off-by: José Pekkarinen <jose.pekkarinen@unikie.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes:
output/build/pango-1.48.10/meson.build:1:0: ERROR: Unknown options: "use_fontconfig"
(WARNING for now, but will be an error in meson 0.60.0).
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes:
output/build/gst1-vaapi-1.18.5/meson.build:1:0: ERROR: Unknown options: "test"
(WARNING for now, but will be an error in meson 0.60.0).
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes:
output/build/gst1-plugins-ugly-1.18.5/meson.build:1:0: ERROR: Unknown options: "examples"
(WARNING for now, but will be an error in meson 0.60.0).
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix teletextdec name and remove vdpau which is no longer available.
Fixes:
output/build/gst1-plugins-bad-1.18.5/meson.build:1:0: ERROR: Unknown options: "teletextdec, vdpau"
(WARNING for now, but will be an error in meson 0.60.0).
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
During LTP and/or kernel development it's very rare that I want the
Open POSIX and the realtime tests. Open POSIX in particular takes
considerable time to build. So this adds the option of disabling them.
They default to on so as not to break existing test automation.
Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Cc: io@richiejp.com
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
While at it, remove the md5 hash as there is already a sha256 hash.
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a rudimentary test inspired from the "Using boto3" section in
the package README ([1]).
Note that it doesn't try to do anything with the instanciated
resource, as this would require a network connection when the test
runs.
[1]: https://github.com/boto/boto3
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
While at it, remove the md5 hash as there is already a sha256 hash.
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The newly-added test uncovered some missing core modules, so add them
now.
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a rudimentary test inspired from the "Using botocore" section in
the package README ([1]).
Note that it doesn't try to use the instantiated client, as this would
require a network connection when the test runs.
[1]: https://github.com/boto/botocore
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
On some developers machines, the default timeout (5 seconds) is not
enough for the test to succeed.
Increase it to 20 seconds, to let more time for the rsa keys to be
generated.
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The patch [1], which is required for DRM to work properly, has been
merged into Linux version 5.14-rc3. There's a 5.14.12 now in stable, so
I took that one.
After Linux boots, /dev/fb0 will be accessible. You can control the
brightness of the display after enabling the framebuffer by running the
following commands:
~ # echo 0 0 > /sys/class/graphics/fb0/pan
~ # echo 255 >/sys/class/backlight/40016c00.dsi.0/brightness
The brightness ranges from 0 to 255, as you can see running the
command:
~ # cat /sys/class/backlight/40016c00.dsi.0/max_brightness
[1] 24b5b1978cd5 ("clk: stm32f4: fix post divisor setup for I2S/SAI PLLs")
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Acked-by: Christophe Priouzeau <christophe.priouzeau@foss.st.com>
[Arnout: add explanation to readme.txt]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Fix CVE-2021-27347: Use after free in lzma_decompress_buf function in
stream.c in Irzip 0.631 allows attackers to cause Denial of Service
(DoS) via a crafted compressed file.
- Fix CVE-2021-27345: A null pointer dereference was discovered in
ucompthread in stream.c in Irzip 0.631 which allows attackers to cause
a denial of service (DOS) via a crafted compressed file.
- Fix CVE-2020-25467: A null pointer dereference was discovered
lzo_decompress_buf in stream.c in Irzip 0.621 which allows an attacker
to cause a denial of service (DOS) via a crafted compressed file.
- lz4 is a mandatory dependency since version 0.640 and
https://github.com/ckolivas/lrzip/commit/3345a239b7f5353a1c1296d6a5d6b90729d4b669https://github.com/ckolivas/lrzip/compare/7f3bf46203bf45ea115d8bd9f310ea219be88af4...v0.641
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
qemu now requires gcc >= 7.5, which was the last release in the 7.x
series. We do not have symbols for a gcc dot-version dependency, nor do
we want to add one.
So, add a dependency on gcc >= 8, for both the host and target variants.
In addition:
- Add a missing comment in package/qemu/Config.in.host explaining the
host gcc requirements if host gcc < 8.
Fixes:
http://autobuild.buildroot.org/results/32b7fee1f8cda2290fd4bd8ac9fe78bacb25b652
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr:
- target qemu also impacted
- propagate to libvirt, gst1-python
- reword commit log that 7.5 is the last 7.x release
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop second patch (already in version)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop python3-pip now that python3-cryptography has been removed
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
python3-cryptography is not needed anymore now that python-cryptography
has a host variant
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since commit 0c7e30b43a,
python-cryptography depends on python3. So python3-cryptography became
redundant at that point. As python3-cryptography is a host-only package,
while python-cryptography is a python-only package, add a host variant
to python-cryptography to be able to drop python3-cryptography.
Update ca-certificates to use host-python-cryptography instead of
host-python3-cryptography.
While at it, drop host-python3-pip and host-python3-six as these
dependencies are not needed. Indeed, pip was never a dependency of
cryptography and six is not a dependency with python3 and will be
dropped in version 3.4 and
https://github.com/pyca/cryptography/commit/e66db8079d3fbd0110e87ece1fd48f4bfd9e48b9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
squash! package/python-cryptography: add host variant
- Remove upstreamed patches
- Add BR2_PACKAGE_PYTHON_CERTIFI and BR2_PACKAGE_QHULL as dependencies
- make DEPENDENCIES one per line and sort alphabetically
- Add a new file: setup.cfg. This file is needed to force matplotlib to use
the system-provided freetype and qhull, and to disable lto.
The setup.cfg file is copied to the source directory before configuring.
LTO must be disabled or else compile errors such as:
"Relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `_ZSt3hexRSt8ios_base'
which may bind externally can not be used when making a shared object;
recompile with -fPIC"
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
LICENSE copyright year was updated.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Replace BR2_PYTHON3_HOST_DEPENDENCY by host-python3 to avoid the
following build failure raised since bump to version 1.17 in commit
32b2a03745:
Traceback (most recent call last):
File "../py/makeversionhdr.py", line 117, in <module>
make_version_header(sys.argv[1])
File "../py/makeversionhdr.py", line 79, in make_version_header
info = get_version_info_from_docs_conf()
File "../py/makeversionhdr.py", line 67, in get_version_info_from_docs_conf
for line in f:
File "/usr/lib/python3.5/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0xc2 in position 2154: ordinal not in range(128)
Indeed, this build failure is not reproduced by host-python3 (in version
3.9.7) so it is probably an issue with python 3.5 (which is 6-years old).
Fixes:
- http://autobuild.buildroot.org/results/96f7b81f5d14715b0b6673a8016a31e9e1552d0b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- disable doc generation (via sphinx) for host build
Reduces host-qemu build time from (on a system with sphinx installed):
real 2m5,522s
user 9m41,292s
sys 1m9,732s
to:
real 1m9,183s
user 8m40,131s
sys 1m9,533s
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
gnuradio suffers from gcc bug 43744 but gqrx that depends on it doesn't
take into account the gcc bug. So let's add it as:
'depends on !BR2_TOOLCHAIN_HAS_GCC_BUG_43744 # gnuradio'
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes the following security issues:
16.15.0:
- ASTERISK-29057: pjsip: Crash on call rejection during high load
16.15.1:
- AST-2020-003: Remote crash in res_pjsip_diversion
A crash can occur in Asterisk when a SIP message is received that has a
History-Info header, which contains a tel-uri.
https://downloads.asterisk.org/pub/security/AST-2020-003.pdf
- AST-2020-004: Remote crash in res_pjsip_diversion
A crash can occur in Asterisk when a SIP 181 response is received that has
a Diversion header, which contains a tel-uri.
https://downloads.asterisk.org/pub/security/AST-2020-004.pdf
16.16.0:
- ASTERISK-29219: res_pjsip_diversion: Crash if Tel URI contains History-Info
16.16.1:
- AST-2021-001: Remote crash in res_pjsip_diversion
If a registered user is tricked into dialing a malicious number that sends
lots of 181 responses to Asterisk, each one will cause a 181 to be sent
back to the original caller with an increasing number of entries in the
“Supported” header. Eventually the number of entries in the header
exceeds the size of the entry array and causes a crash.
https://downloads.asterisk.org/pub/security/AST-2021-001.pdf
- AST-2021-002: Remote crash possible when negotiating T.38
When re-negotiating for T.38 if the initial remote response was delayed
just enough Asterisk would send both audio and T.38 in the SDP. If this
happened, and the remote responded with a declined T.38 stream then
Asterisk would crash.
https://downloads.asterisk.org/pub/security/AST-2021-002.pdf
- AST-2021-003: Remote attacker could prematurely tear down SRTP calls
An unauthenticated remote attacker could replay SRTP packets which could
cause an Asterisk instance configured without strict RTP validation to
tear down calls prematurely.
https://downloads.asterisk.org/pub/security/AST-2021-003.pdf
- AST-2021-004: An unsuspecting user could crash Asterisk with multiple
hold/unhold requests
Due to a signedness comparison mismatch, an authenticated WebRTC client
could cause a stack overflow and Asterisk crash by sending multiple
hold/unhold requests in quick succession.
https://downloads.asterisk.org/pub/security/AST-2021-004.pdf
- AST-2021-005: Remote Crash Vulnerability in PJSIP channel driver
Given a scenario where an outgoing call is placed from Asterisk to a
remote SIP server it is possible for a crash to occur.
https://downloads.asterisk.org/pub/security/AST-2021-005.pdf
16.16.2:
- AST-2021-006: Crash when negotiating T.38 with a zero port
When Asterisk sends a re-invite initiating T.38 faxing and the endpoint
responds with a m=image line and zero port, a crash will occur in
Asterisk.
This is a reoccurrence of AST-2019-004.
https://downloads.asterisk.org/pub/security/AST-2021-006.pdf
16.17.0:
- ASTERISK-29203 / AST-2021-002 — Another scenario is causing a crash
- ASTERISK-29260: sRTP Replay Protection ignored; even tears down long calls
- ASTERISK-29227: res_pjsip_diversion: sending multiple 181 responses causes
memory corruption and crash
16.19.1:
- AST-2021-007: Remote Crash Vulnerability in PJSIP channel driver
When Asterisk receives a re-INVITE without SDP after having sent a BYE
request a crash will occur. This occurs due to the Asterisk channel no
longer being present while code assumes it is.
https://downloads.asterisk.org/pub/security/AST-2021-007.pdf
- AST-2021-008: Remote crash when using IAX2 channel driver
If the IAX2 channel driver receives a packet that contains an unsupported
media format it can cause a crash to occur in Asterisk.
https://downloads.asterisk.org/pub/security/AST-2021-008.pdf
- AST-2021-009: pjproject/pjsip: crash when SSL socket destroyed during
handshake
Depending on the timing, it’s possible for Asterisk to crash when using a
TLS connection if the underlying socket parent/listener gets destroyed
during the handshake.
https://downloads.asterisk.org/pub/security/AST-2021-009.pdf
16.20.0:
- ASTERISK-29415: Crash in PJSIP TLS transport
- ASTERISK-29381: chan_pjsip: Remote denial of service by an authenticated
user
In addition, a large number of bugfixes.
Drop now upstreamed
0006-AC_HEADER_STDC-causes-a-compile-failure-with-autoconf-2-70.patch.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bumps to linux 5.14.13, linux-headers 5.14 and u-boot version
2021.10 and drop local uboot patch where CONFIG_SYS_BOOTM_LEN was set to
16MB because on u-boot 2021.10 it's now set to 64MB as default to make
room for Linux images.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bumps to linux 5.14.13, linux-headers 5.14 and u-boot version
2021.10 and drop local uboot patch where CONFIG_SYS_BOOTM_LEN was set to
16MB because on u-boot 2021.10 it's now set to 64MB as default to make
room for Linux images.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- the last version bump of package/python-cffi (790c10d) ignored
the comment 'Please keep in sync with package/python3-cffi/python3-cffi.mk',
so catch up now
Fixes:
ERROR: No hash found for cffi-1.14.2.tar.gz
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When creating the image we are using the target modules. Building
the modules for host is then unnecessary.
Lets configure host Grub2 for the 'none' platform.
Note that this still installs a platform-dependent file:
.../host/lib/grub/i386-pc/config.h
This file does not seem to have much purpose, but it is harmless.
We did not care to provide a post-isntall hook to remove it.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch updates the location of cdboot.img used, to select the one
from the target directory and not from the host.
The host-grub2 is built only to have access to the Grub tools binaries.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds the calls to MESSAGE, to explicit the different step of
the per-platform builds, following the current tuple loop. Besides a
nicer output to the user, this can also help debug what step actualy
failed.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch cleans the code by removing unnecessary \-continuations.
It replaces the semi-colons by either && or separate lines.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The tools were not installed anymore since we move from autotools to
generic-package. This patch fixes their installation.
We have decided to implement the install tool process by running the "make
install" command for each tuple. This allows to have all different
platforms Grub modules installed in the target. The drawback is the
overwrite of Grub2 binaries tools during each "make install" command. This
drawback is absolutely not important as it happens in the same package. This is
the best option to avoid unnecessary and more complexity to this package.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A simple test that runs nmap twice to create the files scanme-1.xml and
scanme2.xml, then runs pyndiff on both files.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The ndiff package provided by Nmap relies on python2; moreover, there
have been pending pull requests to move ndiff to python3 for over two
years with very little engagement by the maintainers
(https://github.com/nmap/nmap/pull/1807).
Remove the option to select ndiff altogether, it is replaced by
python-pyndiff, which provides the same functionality (and more) as the
ndiff provided by nmap, and is compatible with python3.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This package is a dependency for pyndiff
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Canfestival hasn't seen a patch since November of 2017, and it requires python2
to build. Remove the package.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In addition:
- Remove upstream patch
- Update license hash to reflect license version bump from 0.92 to 0.93
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This fixes a regression introduced in 0.59.0 which prevents gcr from compiling
UI support with the following error:
meson.build:225:5: ERROR: Tried to create target "@BASENAME@_merge",
but a target of that name already exists.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Changes include:
- Remove the dependency on Python2, as nodejs 14 supports Python 3.
- Remove --without-snapshot as it's no longer a supported config
option.
- Remove /openssl to the shared-openssl-includes config option, as the
build system automatically appends /openssl to the includes path.
- License file changes:
- Removed deps/http_parser (MIT)
- Removed deps/node-inspect (MIT)
- Updated some URLs and license years
Since the removed parts are MIT like NodeJS itself, the license info
doesn't change.
- Add a qemu wrapper. V8's JIT infrastructure requires binaries such
as mksnapshot and mkpeephole to be run in the host during the build.
However, these binaries must have the same bit-width as the target
(e.g. a x86_64 host targeting ARMv6 needs to produce a 32-bit
binary). To work around this issue, cross-compile the binaries for
the target and run them on the host with QEMU, much like
gobject-introspection.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Arnout:
- use exec in qemu-wrapper script;
- remove s390x support - qemu doesn't have it.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The pkg-stats script queries release-monitoring.org to find the latest
upstream versions of our packages. However, up until recently,
release-monitoring.org had no notion of stable
vs. development/release-candidate versions, so for some packages the
"latest" version was in fact a development/release-candidate version
that we didn't want to package in Buildroot.
However, in recent time, release-monitoring.org has gained support for
differentiating stable vs. development releases of upstream
projects. See for example
https://release-monitoring.org/project/10024/ for the glib library,
which has a number of versions marked "Pre-release".
The JSON blurb returned by release-monitoring.org has 3 relevant
fields:
- "version", which we are using currently, which is a string
containing the reference of the latest version, including
pre-release.
- "versions", which is an array of strings listing all versions,
pre-release or not.
- "stable_versions", which is an array of string listing only
non-pre-release versions. It is ordered newest first to oldest
last.
So, this commit changes from using 'version' to using
'stable_versions[0]'.
As an example, before this change, pkg-stats reports that nfs-utils
needs to be bumped to 2.5.5rc3, while after this patch, it reports
that nfs-utils is already at 2.5.4, and that this is the latest stable
version (modulo an issue where Buildroot has 2.5.4 and
release-monitoring.org has 2-5-4, this will be addressed separately).
Note that part of this change was already done in commit f7b0e0860, but
it was incomplete.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The pkg-stats scripts tries to match packages against
release-monitoring.org in two ways:
- First by using the "Buildroot" distribution registered on
release-monitoring.org, in which we have added a lot of mappings
between Buildroot package names and release-monitoring.org package
names. If there is a match using this distribution, the package
status is RM_API_STATUS_FOUND_BY_DISTRO, which means that the
resulting HTML has a "found by distro" statement.
- Then, if the first solution didn't work, by using the pattern
matching, as done in the check_package_get_latest_version_by_guess()
function.
However, there is a bug in this later case: it sets the package status
to RM_API_STATUS_FOUND_BY_DISTRO as well, while it should have been
RM_API_STATUS_FOUND_BY_PATTERN. Due to this bug, in the resulting HTML
file from a pkg-stats run, all packages are marked as "found by
distro" even the ones that are "found by guess".
This commit fixes that by setting the correct package status.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Because upstream was inactive, we switched to the moonjit fork in commit
2ca0accc. Now, the moonjit fork is abandonned and Mike Pall resumed
their activity on LuaJIT. Therefore, we can move back to mainline.
There is no new upstream release yet, so take a commit from git. The
official site https://luajit.org/git/luajit.git doesn't offer tarball
downloads, so use the github mirror instead.
The moonjit part is no longer in the COPYRIGHT file (obviously). Also,
compared to the 2.0.5 release, the URLs in the file have been changes to
https. Therefore, the hash is updated.
Also, switch the hash file to two spaces.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In commit 689b9ac439 (package/rpi-firmware: rework boot/config file
handling), a last-minute fixup was made to handle the case where no
config.txt file was provided by the user.
However, the intermediate variable RPI_FIRMWARE_CONFIG_FILE was not used
consistently, and the old PACKAGE_RPI_FIRMWARE_CONFIG_FILE variable was
still used where RPI_FIRMWARE_CONFIG_FILE should have been used instead.
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr: blame myself for the mess; reword commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
For example with libpng: 1.6.37 instead of 1.7.0beta89
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[yann.morin.1998@free.fr: coalesce into a single line]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A new CPE ID was assigned by NIST and this whitelist can be
dropped as the package is setup to use the correct CPE (Not
to be confused with the other lightning-* packages which show
up when a free txt search is used to find the CVE.)
This reverts commit 613953f821.
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Matthew Weber <matthew.weber@collins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A recent update of flake8 in CI introduced a new check E741. It
basically checks that variables are at least 3 characters long. Up to
now, however, we have used shorter names in some places - all of them
turn out to be "l" for a line of text.
Replace all those "l" variables with "line".
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/1687009829
partially:
support/scripts/boot-qemu-image.py:47:21: E741 ambiguous variable name 'l'
support/scripts/check-dotconfig.py:20:38: E741 ambiguous variable name 'l'
support/scripts/size-stats:76:13: E741 ambiguous variable name 'l'
support/testing/tests/core/test_bad_arch.py:17:32: E741 ambiguous variable name 'l'
support/testing/tests/package/test_python_treq.py:10:30: E741 ambiguous variable name 'l'
support/testing/tests/toolchain/test_external.py:30:42: E741 ambiguous variable name 'l'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The dbus-next package uses the Python type annotation for dbus types. This is
not compatible with the python typing assumption that flake8 makes.
Exclude F821 from this line.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/1687009829
partially:
support/testing/tests/package/sample_python_dbus_next.py:17:36: F821 undefined name 's'
support/testing/tests/package/sample_python_dbus_next.py:17:48: F821 undefined name 's'
support/testing/tests/package/sample_python_dbus_next.py:17:56: F821 undefined name 's'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add knockd option to make libpcap and MMU optional and enable it by
default for backward compatibility
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues:
- CVE-2021-41089: Create parent directories inside a chroot during docker
cp to prevent a specially crafted container from changing permissions of
existing files in the host’s filesystem.
- CVE-2021-41091: Lock down file permissions to prevent unprivileged users
from discovering and executing programs in /var/lib/docker.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issue:
- CVE-2021-41092: Ensure default auth config has address field set, to
prevent credentials being sent to the default registry.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Drop backported patch for GCC 10 build problem, part of release
- Use upstream sha256 instead of locally computed
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
On Linux version >= 4.20 in order to have mali working we need to pass
drm_kms_helper.drm_leak_fbdev_smem=1 and at least
drm_kms_helper.drm_fbdev_overalloc=200 to have a double buffer fbdev.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changelog:
- 15346de client: Always close connection with request body in case of error
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changelog:
- 2537be0 cmake: add a possibility to set library version
- 4becbd6 ubusd: convert tx_queue to linked list
- c736e47 ubusd: add per-client tx queue limit
- a8cf678 ubusd: protect against too-short messages
- 4fc532c ubusd: fix tx_queue linked list usage
- b743a33 ubusd: log ACL init errors
- 2099bb3 libubus: use list_empty/list_first_entry in ubus_process_pending_msg
- ef03848 libubus: process pending messages in data handler if stack depth is 0
- a72457b libubus: increase stack depth for processing obj msgs
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There's a new feature to offload L2TP to the Linux kernel, which depends
on libmnl. A new menu option was introduced for that.
It's possible to link an internal version of libmnl
statically for smaller binary size on constraint targets, but this was
not added to the buildroot package for complexity reasons (both build
and licensing).
The COPYING file gained an additional paragraph for internal libmnl
which does not apply, because internal libmnl is not used in the
package.
Link: https://fastd.readthedocs.io/en/latest/releases/v22.html
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix CVE-2021-32765: Hiredis is a minimalistic C client library for the
Redis database. In affected versions Hiredis is vulnurable to integer
overflow if provided maliciously crafted or corrupted `RESP` `mult-bulk`
protocol data. When parsing `multi-bulk` (array-like) replies, hiredis
fails to check if `count * sizeof(redisReply*)` can be represented in
`SIZE_MAX`. If it can not, and the `calloc()` call doesn't itself make
this check, it would result in a short allocation and subsequent buffer
overflow.
https://github.com/redis/hiredis/blob/v1.0.2/CHANGELOG.md
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changelog (since 1.68):
- 1.69, 2021-03-30 Added link to Ada bindings by Tama McGlinn.
Fixed problem with undefined off_t on some compilers.
- 1.70, Patch to ensure compilation with gcc -std=c99, as reported by
John Blaiklock. Fix some inconsistencies in version numbers.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Provide convenience links for BCM43455/CYW43455 based RPi3A+, RPi3B+
and RPi4B WIFI firmware configuration files to avoid runtime firmware
loading warning in the kernel logs, e.g. (RPi3B+):
brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt failed with error -2
or (RP4B):
brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[me: slight rewording/rewrapping in commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add option for the debug set of start/fixup boot files.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Try to be less smart (focused on the one target/one use-case),
instead reduce the rpi-firmware package to a selectable list
of (verbatim) installed firmware files.
- change rpi-firmware config handling from rpi-variant/rpi-flavour
choices to bootcode.bin, pi-default/-extended/-cut-down and
pi4-/default/-extended/-cut-down selection
- add BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE option to select installable
config.txt file
- remove config.txt modify code/handling from raspberry post-image.sh
script
- add different customized config.txt files to the raspberry board
section
- change dtoverlay krnbt from 'dtoverlay=miniuart-bt,krnbt=on' to extra line
with explanation comment
- change raspberry defconfigs to select appropiate rpi-firmware
and config.txt files
- change genimage-raspberrypi4.cfg/genimage-raspberrypi4-64.cfg to
use start4.elf and fixup4.dat
- update board/raspberrypi/readme.txt (add optional files fixup4.dat,
start4.elf and zImage)
With this changes a better support for custom use-cases should
be possible, specially multi-target SD cards as suggested by
Stefan Agner ([1]).
[1] http://lists.busybox.net/pipermail/buildroot/2021-February/303318.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr: fix case of no config.txt provided]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since the ubi/ubifs test has been introduced, it's not possible to
boot the same ubi image twice [1]:
"TODO: if you boot Qemu twice on the same UBI image, it fails to
attach the image the second time, with "ubi0 error:
ubi_read_volume_table: the layout volume was not found"."
For some reason, the kernel corrupt the ubi image if the ubifs
rootfs is mounted with write access. Use a custom config file
to mount the rootfs readonly (vol_type=static). Doing so requires
to add the flash size (vol_size=64MiB).
At least it allows to boot several times the same ubi image.
[1] bf4a6490e4
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The current ubi/ubifs test (test_ubi.py) rely on a Qemu bug present in
2.8.0 that was fixed in Qemu 2.9.0 [1]. The ubi/ubifs settings is
updated to run with Qemu >= 2.9.0 using the new multiple chip handling.
If needed, the old behavior can be enabled using the pflash01 property
"old-multiple-chip-handling" [2].
The issue was not detected until now since we are sill using an old
qemu (2.8 from Debian stretch) for testing in gitlab (using the
Buildroot Docker image used by gitlab-ci.yml).
First the logical eraseblock size (LEB) must be updated to the value
0x3ff80 reported by the kernel when using qemu >= 2.9.0.
UBIFS (ubi0:0): Mounting in unauthenticated mode
UBIFS error (ubi0:0 pid 1): ubifs_read_superblock: LEB size mismatch: 524160 in superblock, 262016 real
UBIFS error (ubi0:0 pid 1): ubifs_read_superblock: bad superblock, error 1
But the system is still failing to boot:
UBIFS error (ubi0:0 pid 1): ubifs_scan: garbage
UBIFS error (ubi0:0 pid 1): ubifs_recover_master_node: failed to recover master node
ubifs is reading garbage since Qemu >= 2.9.0 report a sector
length per device divided by the number of devices (see commit [1]).
The kernel detect two flash devices (dmesg):
Concatenating MTD devices:
(0): "40000000.flash"
(1): "40000000.flash"
into device "40000000.flash"
Divide the physical eraseblock (PEB) size by two.
Tested with qemu 2.9.0, 5.1.0.
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/1543100932
[1] https://git.qemu.org/?p=qemu.git;a=commitdiff;h=feb0b1aa11f14ee71660aba46b46387d1f923c9e
[2] http://lists.busybox.net/pipermail/buildroot/2021-September/622069.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Adding the Image format on the Qemu command line avoid this warning:
"WARNING: Image format was not specified for 'output/TestUbi/images/rootfs.ubi' and probing guessed raw.
Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted.
Specify the 'raw' format explicitly to remove the restrictions."
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 71b8322712 updated the Dockerfile
to be used in CI tests. In order to actually use this new docker image,
update .gitlab-ci.yml to point to the docker image that was created with
the updated Dockerfile.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We are going to remove the gcc fork for csky since it doesn't build
with the latest compilers (gcc 8, 10, 11 tested) [1].
Removing theses defconfigs and the csky gcc fork has become unavoidable
since the Buildroot Docker image used by the gitlab CI will switch soon
to Debian bullseye soon [2].
The cksy gcc fork based on gcc 6 has not been updated since it has been
added to Buildroot [3]. Since then, csky has been added to binutils and
gcc but using the latest upstream version (binutils 2.37 and gcc 11) is
not yet possible due to build issue with glibc 2.34 [4].
Moreover, qemu_csky defconfigs was to be used with the csky qemu fork
(based on Qemu 3.x) added by commit [5] and removed by commit [6].
Since then it's not possible to do a runtime test with theses
defconfigs.
Theses defconfigs can be added back later if the csky toolchain support
is fixed and csky supported by upstream Qemu.
[1] http://lists.busybox.net/pipermail/buildroot/2021-August/621504.html
[2] 71b8322712
[3] 7873a5bd5e
[4] http://lists.busybox.net/pipermail/buildroot/2021-October/624596.html
[5] f816e5b276
[6] 58af9a70cc
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Guo Ren <ren_guo@c-sky.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Asked-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Buildroot CI has been failing due to 404 error on older U-Boot. Updating
the U-Boot version should fix it and it doesn't hurt to use the latest
U-Boot anyway.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure without C++ raised since bump to version
0.11.0 in commit c3a907a770:
../output-1/build/usbredir-0.11.0/meson.build:1:0: ERROR: Unknown compiler(s): [['/home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-g++']]
The following exception(s) were encountered:
Running "/home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-g++ --version" gave "[Errno 2] No such file or directory: '/home/buildroot/autobuild/instance-3/output-1/host/bin/arm-linux-g++'"
Fixes:
- http://autobuild.buildroot.org/results/eca1d8a2b73a769354ab1d24c7996be30f152138
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes CVE-2021-37600 (although the CVE is disputed).
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr: add reference to the CVE]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
nftbles' --with-debug option enables both debugging symbols (with -g)
and debugging macros (with -DDEBUG).
The former are globally driven by the BR2_ENABLE_DEBUG and BR2_DEBUG_n
set of options, and enforced in our toolchain wrapper; the latter should
be driven by the BR2_ENABLE_RUNTIME_DEBUG, but nftables only uses it to
activate an assert-like macro in its json output generator, so we can
well live without that.
So we just unconditionally disable debug in nftables.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr: write a commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
CVE-2020-7747 applies to the Javascript lightning-server project, and
not to the GNU Lightning project:
https://nvd.nist.gov/vuln/detail/CVE-2020-7747
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
[yann.morin.1998@free.fr: reword commit log; add URL]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The hardware related pipelines are obviously not available on other
architectures.
As suggested by upstream [0], add a dependency on arm or aarch64 for
RaspberryPi pipeline, to avoid the following build failure with a
powerpc64 toolchain since commit c09f126f57 (package/libcamera: bump
to version e355ca0087cd93ef80f74c61018e9e9228a93313):
In file included from ../include/libcamera/base/log.h:10,
from ../src/ipa/raspberrypi/raspberrypi.cpp:18:
../src/ipa/raspberrypi/raspberrypi.cpp:64:53: in 'constexpr' expansion of 'std::chrono::operator/<long double, std::ratio<1>, double>(std::literals::chrono_literals::operator""s(1.0e+0l), 3.0e+1)'
/home/buildroot/autobuild/instance-2/output-1/host/opt/ext-toolchain/powerpc64-buildroot-linux-gnu/include/c++/9.3.0/chrono:502:32: error: '(1.0e+0l / 3.0e+1)' is not a constant expression
502 | return __cd(__cd(__d).count() / __s);
../src/ipa/raspberrypi/raspberrypi.cpp:73:56: in 'constexpr' expansion of 'std::chrono::operator/<long double, std::ratio<1>, double>(std::literals::chrono_literals::operator""s(1.0e+0l), 6.0e+1)'
/home/buildroot/autobuild/instance-2/output-1/host/opt/ext-toolchain/powerpc64-buildroot-linux-gnu/include/c++/9.3.0/chrono:502:32: error: '(1.0e+0l / 6.0e+1)' is not a constant expression
Fixes:
- http://autobuild.buildroot.org/results/49caebe7ef7e3d63de49e78d5d6839dd0aedf10c
Additionally, as Kieran puts it:
I'd go further and filter the IPU3 on only x86 for instance, and the
RKISP on (arm||aarch64).
So be it.
[0] https://lists.libcamera.org/pipermail/libcamera-devel/2021-October/025796.html:
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Suggested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: abide by Kieran's wish]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add an configuration to use personalized png image. If the configuration is
empty we keep the psplash default image.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[Arnout: use ifneq condition instead of $(if ...)]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This package provides a set of tools originally developed for the
OpenWrt project. They allow working with various firmware formats that
are required for flashing new images on embedded devices.
One of tools (mkhilinkfw) depends on OpenSSL and doesn't support any
other SSL library (like wolfSSL) directly. It can be used with wolfSSL
using its compatibility layer though.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
[Arnout: add comment about missing license files]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
There are currently three issues with the installation step:
1. it does not ensure the parent destination directory exists before
copying into it, so if /usr/share has not been created in the
dependency chain of edk2-platforms, the installation fails, which
may very well happen easily as edk2-plaforms has nothing in its
dependency chain (except the toolchain et al.);
2. all our dot-stampfiles and .files-list are also copied, as well as
the Readme, license files, and maintainers file. All of those are
useless on the target (and the .files-list introduce
non-reproduciiblity);
3. of a lesser importance, the construct to install, and specifically
to reinstall, does not match what we usually do in Buildroot
(removal of the directory to copy).
We fix all three in one fell swoop:
1. create the destination directory if needed;
2. copy just the directories with the actual platform descriptions
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Dick Olsson <hi@senzilla.io>
Cc: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add BR2_TARGET_EDK2_PLATFORM_OVMF_I386 for x86_64 architecture.
Update the management of EDK2_ARCH to follow the edk2 platform type in
place of BR2 architecture.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
wpewebkit builds without issue using host-python3.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Acked-By: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This release fixes two more bug introduced in release 3.10.0: the extended diagnostics triggered
assertions when used with update() or when inserting elements into arrays. All changes are
backward-compatible.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reworked existing patch to make it apply to this version
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Adding myself as co-maintainer of libuev alongside Peter Seiderer, his
initiative, and I am the upstream so seems logical.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Also change -Dpycairo=false to -Dpycairo=disabled as the option type has
changed to a feature.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The bzip2 module is needed to build the host variant of NodeJS 14.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* The package doesn't support python2 anymore.
* Indent with two spaces in the hash file.
* License file was updated to fully fit the Apache license format
(see: https://github.com/arrow-py/arrow/pull/679)
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Remove six dependency which is no longer required.
Add new bidict dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop python2 support and propagate reverse dependency.
Remove six dependency as it is no longer required.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Also bump linux headers version to 5.10.
Based on NXP 5.10.35-2.0.0 release.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
i.MX VC8000E Encoder library. Intended for the i.MX 8M Plus processor.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
To match NXP 5.10.35-2.0.0 release.
Various updates to the license files, but still NXP license.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
To match NXP 5.10.35-2.0.0 release.
Various updates to the license files, but still NXP license.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
To match NXP 5.10.35-2.0.0 release.
Refresh patch 0001.
Various updates to the license files, but still NXP license.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
To match NXP 5.10.35-2.0.0 release.
Various updates to the license files, but still NXP license.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Although the package claims to support both python2 and python3,
there are some places which contain python3-only code (mainly
asyncio-related).
We can try to tweak some of the files in order to make it work with
python2, but it doesn't worth the effort since python2 isn't maintained
for a long time.
Update the reverse recursive dependencies accordingly.
Fixes:
- http://autobuild.buildroot.net/results/356c6b09566c6020dc320eb89da791581571cb7f/
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
From the ChangeLog (see git history for full details):
- Fix suffix check regression on Windows with Large File Support
- Skip setting alternate interface when not needed
- Only clamp transfer size on Linux
- Quirk for GD32 leave request
- Improve status and error messages and exit codes
- dfuse: Process all alternate interfaces in a DfuSe file
- dfuse-pack.py: Fix alternate settings if first is 0
Link: https://lists.osmocom.org/pipermail/dfu-util/2021-September/000014.html
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since v0.8 a script 'dfuse-pack.py' is part of the package, which has a
different license.
Fixes: c212a90b61 ("package/dfu-util: bump version to 0.8, add hash, fix SITE url")
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
DFU 1.1 specification is also supported.
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Commit e6ee07f41a (package/python-flask-expects-json: new package)
added a non-functional test case that, as noticed by Edgar, fails with:
AssertionError: '%{http_code}' != '200'
That's because the % sign is self-escaped, à-la C, in the first part
of the command, probably to avoid its being %-formatted. But only the
second part of the command is %-formatted, so we do not need to
self-escape % in the first part.
Additionally, since eb3ee3078a (support/testing/infra/emulator.py:
prevent the commands from wrapping), we no longer need to play tricks
with commands that are too long to fit on the first line of the shell
prompt.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Edgar Bonet <bonet@grenoble.cnrs.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* The package doesn't support python2 anymore.
* Take also sha256 from pypi.
* License was updated with a year bump.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* The package doesn't support python2 anymore (so the POST_INSTALL
hook is not needed now).
* Indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Testing buildroot 2021.05 I observed that after first
boot I was having the following folders:
/context:
/system_u:object_r:auditd_log_t
The root of this problem turned to be a difference in the
output of $(selabel_lookup -b file -k /var/log/audit) called
by S02auditd that from this version on looks like:
$ selabel_lookup -b file -k /var/log/audit
Default context: system_u:object_r:auditd_log_t
This patch will cut it to retrieve the type piece only. Unfortunately,
audit has no options to create machine-readable output that is
guaranteed not to change, so that's the best we can do.
Signed-off-by: José Pekkarinen <jose.pekkarinen@unikie.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
dtbocfg, which stands for Device Tree Blob Overlay Configuration
File System, was developed to serve as a userspace API of Device
Tree Overlay.
https://github.com/ikwzm/dtbocfg
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The list of tests is as follows:
TestGdbHostOnlyDefault: build just minimal host-gdb, default version
TestGdbHostOnlyAllFeatures: build host-gdb, default version, with all
features enabled (TUI, Python, simulator)
TestGdbserverOnly: build just target gdbserver, default version
TestGdbFullTarget: build just target gdb, default version
TestGdbHostOnly9x: build minimal host-gdb, 9.x version
TestGdbHostGdbserver9x: build minimal host-gdb 9.x + gdbserver
TestGdbHostGdbTarget9x: build minimal host-gdb 9.x + full gdb
TestGdbHostOnly11x: build minimal host-gdb, 11.x version
TestGdbHostGdbserver11x: build minimal host-gdb 11.x + gdbserver
TestGdbHostGdbTarget11x: build minimal host-gdb 11.x + gdb
TestGdbArc: build minimal host-gdb + gdb + gdbserver, for the special
ARC architecture version
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now that gdb 11.x has been added, that 10.x is the default, we can
drop version 8.3.x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When doing this, we can simplify the RISC-V related logic. Indeed, as
there was no support for RISC-V in gdb 9.x, which was the current
default, we had some trickery in the Config.in file to ensure gdb 10.x
was used by default on RISC-V. However now that 10.x is the default
for everybody, this trickery is no longer needed.
Also, we now needs to enable BR2_PACKAGE_GDB_TOPLEVEL when host-gdb is
not built, as the default target gdb version is 10.x, and threfore
requires BR2_PACKAGE_GDB_TOPLEVEL=y.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
All patch from gdb 10.2 are kept.
Starting from version 11.x, gdb needs the gmp library. The target
variant needs a bit of care: if BR2_GDB_VERSION_11 is not set, either
the host gdb is not enabled, in which case the default for the target
gdb is 9.x, or the host gdb is enabled, and another version is selected.
Signed-off-by: Michael Fischer <mf@go-sys.de>
[Thomas:
- fix how the gmp dependency is handled
- set BR2_PACKAGE_GDB_TOPLEVEL to y for gdb 11.x
- fix how BR2_GDB_VERSION is set for gdb 11.x]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- only select target gmp if using gdb 11
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Repeat after me: "Forcing the value of <pkg>_DEPENDENCIES inside a
conditional is the root of all evil."
Repeat after me: "Forcing the value of <pkg>_DEPENDENCIES inside a
conditional is the root of all evil."
Repeat after me: "Forcing the value of <pkg>_DEPENDENCIES inside a
conditional is the root of all evil."
Repeat after me: "Forcing the value of <pkg>_DEPENDENCIES inside a
conditional is the root of all evil."
Enough? :-)
Due to this mistake, any other GDB_DEPENDENCIES defined before this
assignment were lost. For example, the host-flex host-bison added
inside the GDB_FROM_GIT==y condition were ignored if
BR2_PACKAGE_GDB_DEBUGGER.
Fixes the build of all ARC configurations that have
BR2_PACKAGE_GDB_DEBUGGER enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Changelog:
- Update CYW43455 bluetooth firmware,
Second Spectra fix for CYW43455 (CVE-2020-10370)
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changelog:
- Update CYW43455 bluetooth firmware,
Second Spectra fix for CYW43455 (CVE-2020-10370)
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Upstream now supplies sha256 hashes, so drop upstream md5 and locally
computed sha256 in favor of that.
The hash for LICENSE has changed due to the copyright years and author
last name being updated.
The hash for chomp.c and pidfile.c has been changed due to copyright
years and author last name being updated, as well as doxygen comments
being added to the files.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issue:
- SQUID-2020:12 Out-Of-Bounds memory access in WCCPv2
(CVE-2021-28116 aka ZDI-CAN-11610)
Due to an out of bounds memory access Squid is vulnerable to an
information leak vulnerability when processing WCCPv2 messages.
This problem allows a WCCPv2 sender to corrupt Squids list of
known WCCP routers and divert client traffic to attacker
controlled routers.
This attack is limited to Squid proxy with WCCPv2 enabled and
IP spoofing of a router IP address configured as trusted in
squid.conf.
For more details, see the advisory:
http://lists.squid-cache.org/pipermail/squid-announce/2021-October/000136.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go1.17.2 (released 2021-10-07) includes a security fix to the linker and
misc/wasm directory, as well as bug fixes to the compiler, the runtime, the go
command, and to the time and text/template packages.
https://golang.org/doc/devel/release#go1.17.minor
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changelog (since 2021.04.21):
47007d0 wireless-regdb: update regulatory database based on preceding changes
e983a25 Update regulatory rules for Ecuador (EC)
a0bcb88 wireless-regdb: Update regulatory rules for Norway (NO) on 6 and 60 GHz
cdf854d wireless-regdb: Update regulatory rules for Germany (DE) on 6GHz
a4468e8 wireless-regdb: update regulatory database based on preceding changes
86cba52 wireless-regdb: reduce bandwidth for 5730-5850 and 5850-5895 MHz in US
6fa2384 wireless-regdb: remove PTMP-ONLY from 5850-5895 MHz for US
9839e1e wireless-regdb: recent FCC report and order allows 5850-5895 immediately
42dfaf4 wireless-regdb: update 5725-5850 MHz rule for GB
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2021-41617: sshd in OpenSSH 6.2 through 8.x before 8.8, when
certain non-default configurations are used, allows privilege escalation
because supplemental groups are not initialized as expected. Helper
programs for AuthorizedKeysCommand and AuthorizedPrincipalsCommand may
run with privileges associated with group memberships of the sshd
process, if the configuration specifies running the command as a
different user.
https://www.openssh.com/txt/release-8.8https://www.openssh.com/txt/release-8.7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch removes unneeded redirections when
calling iptables-restore and iptables-save, and
it adds the save operation to the usage help.
Signed-off-by: José Pekkarinen <jose.pekkarinen@unikie.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package uses meson-package infrastracture, so we don't need to
explicitly pass its additional CFLAGS to some variable. The only thing we
need to pass them is to use MESA3D_CFLAGS, because in package/pkg-meson.mk
we have:
$(2)_CFLAGS ?= $$(TARGET_CFLAGS)
that makes the work automatically, where $(2) is exactly the package name,
though $(2)_CFLAGS expands to MESA3D_CFLAGS.
So let's remove the MESA3D_CONF_OPTS += -DCMAKE_C_FLAGS="$(MESA3D_CFLAGS)"
line that has been added by mistake.
Note: this doesn't fix any bug, but remove an unnecessary and ambiguos line
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Traditional VT-10x terminals (and their emulators) [0] have a "magic
margins" feature that enables the last character position to be updated
without scrolling the screen: whenever a character is printed on the
last column, the cursor stays over the character, instead of moving to
the next line.
The Busybox shell, ash, attempts to defeat this feature by printing
CR,LF right after echoing a character to the last column.[1] This
doesn't play well with emulator.py. The run() method of the Emulator
class captures the output of the emulated system and assumes the first
line it reads is the echo of the command, and all subsequent lines are
the command's output. If the line made by the command + shell prompt is
longer than 80 characters, then it is echoed as two or more lines, and
all but the first one are mistaken for the command's output.
We fix this by telling the emulated system that we are using an
ultra-wide terminal with 29999 columns. Larger values would be ignored
and replaced by the default, namely 80 columns.[2]
[0] https://vt100.net/docs/vt100-ug/chapter3.html - DECAWM
[1] https://git.busybox.net/busybox/tree/libbb/lineedit.c?h=1_34_0#n412
[2] https://git.busybox.net/busybox/tree/libbb/xfuncs.c?h=1_34_0#n258
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Co-authored-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Upstream has .sha256 checksum files, drop redundant .md5 checksum
- Backport upstream patch to silence bogus error message for loopback
- SMCRoute is useless w/o kernel support, use same fixups as mrouted
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure without wchar raised since bump to
version 0.12.0 in commit 83a0e8dea2:
/home/buildroot/autobuild/instance-0/output-1/build/log4cxx-0.12.0/src/main/include/log4cxx/helpers/transcoder.h:113:33: error: 'wstring' in namespace 'std' does not name a type
113 | static void decode(const std::wstring& src, LogString& dst);
| ^~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/7d0297b071df06bc312b9927396021aa6fe401f4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure without stack-protector raised since
bump to version 0.11.0 in commit
c3a907a770:
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/9.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: usbredirparser/libusbredirparser.so.1.1.0.p/usbredirparser.c.o: in function `va_log':
usbredirparser.c:(.text+0x1c4): undefined reference to `__stack_chk_guard'
Fixes:
- http://autobuild.buildroot.org/results/40de5443e98157ad50c6841ea70a835cd5ad4fe9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This has a compile time dependency on gst1-plugins-bad due to
the codecparsers dependency.
We need to prevent the wpe plugin from being selected when wpewebkit
media-stream support is enabled as the wpe plugin requires wpewebkit
which would create a circular dependency with gst1-plugins-bad.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Sadly the most recent version of Microchip's SAM-BA programming tool is no longer hosted
on GitHub. Therefore the package is downloaded from Microchip directly.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
mips_32 is not supported by ffmpeg and it tries to build with loongson3
SIMD support that leads to build failure due to:
/tmp/ccFO2LRa.s: Assembler messages:
/tmp/ccFO2LRa.s:15314: Error: opcode not supported on this processor: mips32 (mips32) `dmult $2,$6'
/tmp/ccFO2LRa.s:15316: Error: opcode not supported on this processor: mips32 (mips32) `dsrl $2,$2,32'
So let's --disable-asm to prevent using those unsupported opcodes for every
mips architecture according to Arnout.
Fixes:
http://autobuild.buildroot.net/results/f01/f01d9cedec8e1b371308d0f7af561a75883fa27c/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Compiling on Ubuntu 20.04 generates this:
./util.c: In function ‘file_write_dep’
./util.c:54:18: warning: ‘..config.tmp’ directive writing 12 bytes into a region of size between 1 and 4097 [-Wformat-overflow=]
54 | sprintf(buf, "%s..config.tmp", dir);
| ^~~~~~~~~~~~
./util.c:54:2: note: ‘sprintf’ output between 13 and 4109 bytes into a destination of size 4097
54 | sprintf(buf, "%s..config.tmp", dir);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
and similar warnings on confdata.c, lines 778, 989, 995, 1000, 1007,
1040, 1046 and 1054. Avoid the warnings by enlarging the destination
buffer of fprintf().
Normally, we want changes to kconfig to be reflected by patches in
support/kconfig/patches. This makes it easier to resync with upstream
kconfig. However, in this case, everything that is changed here is
already changed completely (and differently) upstream, so there is no
added value in keeping the patch.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update to syslog-ng-3.34.1. Drop patch that has been applied upstream.
Update version in config file.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
With some toolchains (e.g. mips64el), partial linking fails in the
following way:
/tmp/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/mips64el-buildroot-linux-uclibc/8.4.0/../../../../mips64el-buildroot-linux-uclibc/bin/ld: build/release/libmupdf.a(Dingbats.cff.o): ABI is incompatible with that of the selected emulation
/tmp/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/mips64el-buildroot-linux-uclibc/8.4.0/../../../../mips64el-buildroot-linux-uclibc/bin/ld: failed to merge target specific data of file build/release/libmupdf.a(Dingbats.cff.o)
Taking inspiration from commit
9eca4b9f84, fix it by using GCC instead
of LD for partial linking.
Note that on mips the build will now produce warnings similar to this
one:
buildroot/output/host/lib/gcc/mips64el-buildroot-linux-gnu/10.3.0/../../../../mips64el-buildroot-linux-gnu/bin/ld: build/release/libmupdf.a(NotoSansTaiTham-Regular.ttf.o): warning: linking abicalls files with non-abicalls files
During a runtime test on mips64el under qemu, mupdf-x11 was
nonetheless able to display a sample PDF file correctly.
Fixes:
- http://autobuild.buildroot.net/results/156fe9ee5f6dccdc98990f6c5de5562383bc2b74/
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Plus, indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Plus, indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The pacakge doesn't support python2 anymore. Therefore, we can remove
host-python3-decorator and add a host variant for python-decorator.
As a consequence of that, the python-networkx dependency was renamed from
host-python3-decorator to host-python-decorator.
In addition, indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* The package doesn't support python2 anymore.
* Hence, python-simplelogging now depends on python3.
* License was updated with a year bump.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Plus, indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* License was updated with a year bump.
* Indent with two spaces on the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Plus, indent with two spaces on the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure with musl raised since bump to version
1.18 in commit 1a7be12e1e:
src/netconfig.c: In function 'netconfig_ipv6_to_string':
src/netconfig.c:188:18: error: 'struct in6_addr' has no member named '__in6_u'; did you mean '__in6_union'?
188 | memcpy(in6_addr.__in6_u.__u6_addr8, addr, 16);
| ^~~~~~~
| __in6_union
Fixes:
- http://autobuild.buildroot.org/results/2c4e6cf22e6fb5582470930241904878070f1144
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Release Notes:
```
This release was focused on stability and hardening, notably fixing some
long-standing race conditions and memory leaks. Default mount options got
tweaked towards data safety.
All users are strongly advised to upgrade.
```
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* Update unsupported testcases for musl (process.c has been removed in
this release)
* refresh 0001-lapi-Add-sysinfo.h-to-fix-build-with-MUSL-libc.patch
(unfortunately still needed, it'd be great to update all toolchains)
* Backport fix after this release:
- 3 patches for build fix on sourcery-arm
- functional fix from e42149e28 ("lib: fix MemAvailable parsing")
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Updated COPYING file to remove the PLPA exemption (appendix 2)
With this change the license is now GPLv2 without any additional wording.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is only a runtime dependency, not a build dependency.
Based on a similar patch by James Hilliard for the wpewebkit
package.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* The package doesn't support python2 anymore.
* Update comment of reverse dependency
* Indent with two spaces in the hash file.
* License was changed with a year bump.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
[yann.morin.1998@free.fr: update comment of reverse dependency]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* Update dependency list (added python-jedi).
* The package is python3-only, and not because of pygments, so
the comment after the "depends on" can be removed.
* Indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* The package doesn't support python2 anymore.
* The only reverse dependency, ipython, already depends on python3
* Update URL in Config.in.
* Indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
[yann.morin.1998@free.fr:
- actually add dependency on python3
- add note about ipython
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* The package doesn't support python2 anymore.
* The two reverse dependencies, crossbar and twisted, already depend on
python3
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
[yann.morin.1998@free.fr: add note about crossbar and twisted]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* The package doesn't support python2 anymore.
* Update comment of reverse dependencies
* Indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
[yann.morin.1998@free.fr: update comment of reverse dependencies]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* License was updated with a year bump.
* Added md5 from pypi and reformat indentation with two spaces.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* The package doesn't support python2 anymore.
* SETUP_TYPE was changed to setuptools.
* Indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* Update URL on Config.in
* Indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
During the review of the lua-augeas package, it was pointed out that a
"select BR2_PACKAGE_AUGEAS" should be used instead of a "depends on
BR2_PACKAGE_AUGEAS". But, the same review pointed that python-augeas
used a "depends on BR2_PACKAGE_AUGEAS".
In order to make things consistent, let's switch to "select
BR2_PACKAGE_AUGEAS" as well for python-augeas.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We need to backport an ARM compilation build fix.
The optional pw-cli tool now depends on readline, so depend on it when
available.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The ISO9660 tests are only testing BIOS Legacy.
Add support to test an ISO9660 image based on EFI BIOS.
Add support to test an ISO9660 hybrid image based on Legacy and EFI BIOS.
Add dedicated Grub2 builtin config for the EFI compatible cases.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add support the build the firmware for QEMU i386 pc machine
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[yann.morin.1998@free.fr:
- do not make it available for BR2_x86_64
- introduce BR2_TARGET_EDK2_ARCH_SUPPORTS
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When booting under EFI, grub2 will output a nice and shiny boot menu,
using extended ASCII characters (in the [0x80..0xFF] range), namely
CP437 [0], on the assumption that the VGA BIOS is a real one and has the
corresponding (and only!) font, as is the case on real hardware.
However, when run in our runtime test infrastructure, this triggers the
infamous python UnicodeDecodeError exception:
Traceback (most recent call last):
[...]
emulator.login()
File "[...]/buildroot/support/testing/infra/emulator.py", line 89, in login
index = self.qemu.expect(["buildroot login:", pexpect.TIMEOUT],
File "/usr/lib/python3/dist-packages/pexpect/spawnbase.py", line 340, in expect
return self.expect_list(compiled_pattern_list,
File "/usr/lib/python3/dist-packages/pexpect/spawnbase.py", line 369, in expect_list
return exp.expect_loop(timeout)
File "/usr/lib/python3/dist-packages/pexpect/expect.py", line 111, in expect_loop
incoming = spawn.read_nonblocking(spawn.maxread, timeout)
File "/usr/lib/python3/dist-packages/pexpect/pty_spawn.py", line 485, in read_nonblocking
return super(spawn, self).read_nonblocking(size)
File "/usr/lib/python3/dist-packages/pexpect/spawnbase.py", line 178, in read_nonblocking
s = self._decoder.decode(s, final=False)
File "/usr/lib/python3.8/codecs.py", line 322, in decode
(result, consumed) = self._buffer_decode(data, self.errors, final)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xda in position 0: invalid continuation byte
Grub2 is not wrong in emitting those chars, and basically we should not
expect the packages we test to always emit correct UTF-8 sequences; at
the very least, this should not cause the test infra to fail.
We fix that by telling pexpect.spawn to "fix" such invalid sequences by
replacing them with the suitable Unicode character, U+FFFD REPLACEMENT
CHARACTER.
[0] https://en.wikipedia.org/wiki/Code_page_437
[1] https://docs.python.org/3/library/codecs.html#error-handlers
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[yann.morin.1998@free.fr:
- don't change encoding, use codec_errors
- rewrite commit log accordingly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* The package doesn't python2 anymore.
* Indent with two spaces in the hash file.
* License changes was a year bump.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* Indent with two spaces in the hash file.
* License change was a year bump.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* The package doesn't support python2 anymore.
* License was updated with a year bump.
* Indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* The package doesn't support python2 anymore.
* hash file: indent with two spaces and bring also sha256 from pypi.
* License was updated with a year bump.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* The package doesn't support python2 anymore.
* Indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* The package doesn't support python2 anymore.
* Indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure with python raised since its activation
by commit cfc80eeeb4:
In file included from /home/giuliobenetti/autobuild/run/instance-2/output-1/host/include/python3.9/Python.h:63,
from python/zbarmodule.h:24,
from python/zbarmodule.c:24:
/home/giuliobenetti/autobuild/run/instance-2/output-1/host/include/python3.9/pyport.h:741:2: error: #error "LONG_BIT definition appears wrong for platform (bad gcc/glibc config?)."
741 | #error "LONG_BIT definition appears wrong for platform (bad gcc/glibc config?)."
| ^~~~~
Fixes:
- http://autobuild.buildroot.org/results/43a8c8d5403c329f2d754ed09807a53772174397
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add support for building an hybrid ISO9660 image compatible with legacy
and UEFI BIOS. Note that this is not about an (iso)hybrid image, which
can boot from both a CDROM or a USB stick, but really about an image
being bootable from the legay BIOS or EFI; the two are orthognal.
The option -eltorito-alt-boot need to be used in the xorriso command
to generate the hybrid image. That option is a separator, meaning the
previous boot entry is done, and the following boot options define a new
boot entry.
The -no-emul-boot defines the type of the current boot image; that's why
it has to now be repeated in each of the BIOS and EFI options.
Finally, for symetry and consistency between the BIOS and EFI options,
we move the BIOS image option first.
Note: the BIOS boot image options have to be provided before the EFI
ones, or the system won't boot; the underlying reason is not known...
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[yann.morin.1998@free.fr:
- note about hybrid vs. (iso)hybrid
- explain -eltorito-alt-boot
- explain duplication of -no-emul-boot
- rename the variables
- note about the BIOS-EFI ordering
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add options to chose individual EAP plugins.
All the new plugins are enabled by default if the old single option was
enabled, for a seamless update from an older Buildroot config, but for
new configurations, they are not enabled by default.
BR2_PACKAGE_STRONGSWAN_EAP_AKA_3GPP2 is the only plugin requiring
libgmp; the selection of BR2_PACKAGE_GMP is moved down accordingly.
Signed-off-by: Martin Elshuber <martin.elshuber@theobroma-systems.com>
[yann.morin.1998@free.fr:
- move BR2_PACKAGE_STRONGSWAN_EAP to legacy
- extend commit log accordingly
- fix check-package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In commit 179ae068eb (fs/iso9660: add support to Grub EFI bootloader
in the image), we did a last-minute change when applying the patch, on
the flawed assumption that the commands were run in a standard Makefile
rule.
However, for filesystems, most commands are run in a script (so they run
under fakeroot). As such, we can't silence the commands with the usual
Makefile '@' construct.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add support to boot the Grub bootloader from an EFI BIOS in the ISO9660
image.
For that we need to create EFI System Partition (ESP). The ESP is a vfat
partition which contain the Grub2 binary at the /EFI/BOOT/ location.
xorriso command will generate the iso image including the ESP.
We notice Grub can not read and mount the ESP, therefore we place the Grub
configuration file in the ISO9660 partition. A Grub2 builtin configuration
need to be used to tell Grub2 to search automatically its configuration
file in the ISO9660 partition. Use 'set root=(cd0)' in the configuration
file passed to BR2_TARGET_GRUB2_BUILTIN_CONFIG_EFI.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[yann.morin.1998@free.fr: fix timestamp fixup hook]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When Grub2 is build it is configured only for one boot set-up, BIOS Legacy,
EFI 32 bit or EFI 64 bit. It can not deal with several boot set-up on the
same image.
This patch allows to build Grub2 for different configurations simultaneously.
To cover Grub2 configuration of legacy BIOS platforms (32-bit), 32-bit EFI
BIOS and 64-bit EFI BIOS in the same build, multi-build system felt much more
reasonable to just extend the grub2 package into 3 packages.
We can no longer use autotools-package as a consequence of this multi-build, and
we have to resort to generic-package and a partial duplication of
the autotools-infra. Grub2 was already using custom option like --prefix or
--exec-prefix so this won't add much more weirdness.
We use a GRUB2_TUPLES list to describe all the configurations selected.
For each boot case described in the GRUB2_TUPLES list, it configures and
builds Grub2 in a separate folder named build-$(tuple).
We use a foreach loop to make actions on each tuple selected.
We have to separate the BR2_TARGET_GRUB2_BUILTIN_MODULES and the
BR2_TARGET_GRUB2_BUILTIN_CONFIG for each BIOS or EFI boot cases.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[yann.morin.1998@free.fr:
- keep sub-options properly indented
- fix check-package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The startup.nsh file is useless to boot EFI payloads. We just need to
follow the naming detection specified in the UEFI spec.
The EFI payload need to be placed in the boot/efi folder in the EFI partition
and follow the architecture naming as described below:
32bit : bootia32.efi
x64 : bootx64.efi
aarch32 : bootarm.efi
aarch64 : bootaa64.efi
This naming is already right in the packages involved (systemd, grub2,
gummiboot), therefore we just need to drop the generation of the
startup.nsh file.
The usage of the startup.nsh in genimage is also dropped to avoid errors in
the image generation.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Tested-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When parsing and adding modules the refpolicy build system checks their
validity using xmllint. By default the host system version is used and
if not found an error is displayed but the build is not stopped. This
leads to interesting issues where modules are not added correctly to
modules.conf[1] (other possible issues are likely).
Fix this by adding a dependency on host-libxml2 and explicitly use the
xmllint binary built by Buildroot.
[1] https://lore.kernel.org/buildroot/20210830114531.2285178-1-jose.pekkarinen@unikie.com/
Tested-by: José Pekkarinen <jose.pekkarinen@unikie.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When building embedded systems, which buildroot targets, the system
often does not know the current time. However, when verifying X509
certificates this is often required.
The system-fix plugin is a handy tool to configure the behavior when
the current time is unknown.
Signed-off-by: Martin Elshuber <martin.elshuber@theobroma-systems.com>
The package is now standalone (no dependencies) and supports
only python3.
Plus, indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
python2 support has been removed since version 4.9.3 resulting in the
following build failure since bump to version 4.10.0 in commit
109ea1a4a2:
File "/tmp/instance-1/output-1/build/python-beautifulsoup4-4.10.0/bs4/__init__.py", line 36, in <module>
raise ImportError('You are trying to use a Python 3-specific version of Beautiful Soup under Python 2. This will not work. The final version of Beautiful Soup to support Python 2 was 4.9.3.')
Fixes:
- http://autobuild.buildroot.org/results/57e6677932f587c279cc0ed671895740d0cf2304
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Use the standard install for the host, so e.g. pvcreate is installed as
well. pvcreate is needed for libvirt.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
It's requirement has been removed in previous commit.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bugfix release, fixing a number of regressions:
- Fixed a regression in Django 3.2 that caused a crash validating "NaN"
input with a forms.DecimalField when additional constraints, e.g.
max_value, were specified (#32949).
- Fixed a bug in Django 3.2 where a system check would crash on a model with
a reverse many-to-many relation inherited from a parent class (#32947).
- Fixed a regression in Django 3.2 that caused the incorrect offset
extraction from fixed offset timezones (#32992).
https://docs.djangoproject.com/en/3.2/releases/3.2.6/https://docs.djangoproject.com/en/3.2/releases/3.2.7/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Changelog (since 1.17, from [1]):
ver 1.18:
Add support for Access Point FILS IP Address Assignment IE.
Add support for P2P GO-side 4-way handshake IP allocation.
Add support for forcing SAE group 19 if BSS requires it.
Fix issue with handling faulty SAE duplicate commits.
[1] https://git.kernel.org/pub/scm/network/wireless/iwd.git/tree/ChangeLog
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Changelog (since 0.43, from [1]):
ver 0.44:
Fix issue with allowing zero byte input for AEAD cipher.
Fix issue with filling in DNS info in DHCP lease objects.
Add support neighbor discovery utility helpers.
[1] https://git.kernel.org/pub/scm/libs/ell/ell.git/tree/ChangeLog
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop patches that are now upstream.
Enable python module when available as it should now work with
python3.9 as of this release.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update to micropython-1.17. The LICENSE text has been updated to reflect
the licenses used for various libraries and ports, update the hash
accordingly.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The various micropython ports may include code licensed under different
licenses compared to the core micropython. List these in MICROPYTHON_LICENSE.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Plus, indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since bump of protobuf to version
3.18.0 in commit c28924920d:
/home/giuliobenetti/autobuild/run/instance-0/output-1/build/opencv3-3.4.15/modules/dnn/src/caffe/caffe_io.cpp: In function 'bool cv::dnn::ReadProtoFromBinary(google::protobuf::io::ZeroCopyInputStream*, google::protobuf::Message*)':
/home/giuliobenetti/autobuild/run/instance-0/output-1/build/opencv3-3.4.15/modules/dnn/src/caffe/caffe_io.cpp:1114:67: error: no matching function for call to 'google::protobuf::io::CodedInputStream::SetTotalBytesLimit(const int&, int)'
1114 | coded_input.SetTotalBytesLimit(kProtoReadBytesLimit, 536870912);
| ^
In file included from /home/giuliobenetti/autobuild/run/instance-0/output-1/build/opencv3-3.4.15/modules/dnn/src/caffe/caffe_io.cpp:93:
/home/giuliobenetti/autobuild/run/instance-0/output-1/host/mipsel-buildroot-linux-gnu/sysroot/usr/include/google/protobuf/io/coded_stream.h:401:8: note: candidate: 'void google::protobuf::io::CodedInputStream::SetTotalBytesLimit(int)'
401 | void SetTotalBytesLimit(int total_bytes_limit);
| ^~~~~~~~~~~~~~~~~~
/home/giuliobenetti/autobuild/run/instance-0/output-1/host/mipsel-buildroot-linux-gnu/sysroot/usr/include/google/protobuf/io/coded_stream.h:401:8: note: candidate expects 1 argument, 2 provided
Fixes:
- http://autobuild.buildroot.org/results/2856060cb59250f4ef7ab75a848a3dc0be9b821b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Fix the following build failure raised since bump of protobuf to version
3.18.0 in commit c28924920d:
/home/giuliobenetti/autobuild/run/instance-0/output-1/build/opencv3-3.4.15/modules/dnn/src/caffe/caffe_io.cpp: In function 'bool cv::dnn::ReadProtoFromBinary(google::protobuf::io::ZeroCopyInputStream*, google::protobuf::Message*)':
/home/giuliobenetti/autobuild/run/instance-0/output-1/build/opencv3-3.4.15/modules/dnn/src/caffe/caffe_io.cpp:1114:67: error: no matching function for call to 'google::protobuf::io::CodedInputStream::SetTotalBytesLimit(const int&, int)'
1114 | coded_input.SetTotalBytesLimit(kProtoReadBytesLimit, 536870912);
| ^
In file included from /home/giuliobenetti/autobuild/run/instance-0/output-1/build/opencv3-3.4.15/modules/dnn/src/caffe/caffe_io.cpp:93:
/home/giuliobenetti/autobuild/run/instance-0/output-1/host/mipsel-buildroot-linux-gnu/sysroot/usr/include/google/protobuf/io/coded_stream.h:401:8: note: candidate: 'void google::protobuf::io::CodedInputStream::SetTotalBytesLimit(int)'
401 | void SetTotalBytesLimit(int total_bytes_limit);
| ^~~~~~~~~~~~~~~~~~
/home/giuliobenetti/autobuild/run/instance-0/output-1/host/mipsel-buildroot-linux-gnu/sysroot/usr/include/google/protobuf/io/coded_stream.h:401:8: note: candidate expects 1 argument, 2 provided
Fixes:
- http://autobuild.buildroot.org/results/4f2a4e769c826d44fdec61b049d3d30a7e39a4d2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
- Drop patch (already in version) and so autoreconf
- Update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Fix the following build failure with glibc >= 2.33:
src/client/linux/handler/exception_handler.cc: In function 'void google_breakpad::{anonymous}::InstallAlternateStackLocked()':
src/client/linux/handler/exception_handler.cc:147:49: error: no matching function for call to 'max(int, long int)'
147 | static const unsigned kSigStackSize = std::max(16384, SIGSTKSZ);
| ~~~~~~~~^~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/61a89fa954db16a7b5b9fcee55c545e489f8d489
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
python-attrs contains a file with API for python 3.6+.
Although we can make a "tweak" and remove this specific file
for python2, we prefer to make this package available only for
python3, because the day this package (and many others) will drop
support for python2 is probably very close.
In addition, update python-attrs recursive dependencies to
depend on python3 too (python-automat is the only one left).
Fixes:
- http://autobuild.buildroot.net/results/aa6/aa6889bc254eaa93adb4fc1a71bcee9f2f23cb33/
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
[yann.morin.1998@free.fr: fix check-package]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This release clears CVE-2021-40530 and fixes a problem with ChaCha20
AVX2 implementation. The CVE was due to ElGamal encryption using a work
estimate to size encryption exponents instead subgroup order. The
ChaCha20 issue was due to mishandling a carry in the AVX2 code path. The
ChaCha20 issue was difficult to duplicate, so most users should not
experience it.
https://github.com/weidai11/cryptopp/releases/tag/CRYPTOPP_8_6_0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Syslinux use some python scripts during the build and they
are using python interpreter by default. It fail to build
when there is no python interpreter on the host.
[...]/syslinux-6.03/com32/cmenu/menugen.py
make[6]: python: No such file or directory
Since Syslinux 5.00, we can override the python interpreter
used during the build:
https://repo.or.cz/syslinux.git/commitdiff/4dec62ce9c2c0d170f21b3ae2d7c618eb7a30c05
Add the missing host-python3 dependency and override
it in SYSLINUX_BUILD_CMDS.
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/1614446766
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr: fix check-package]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since v2.2 release (commits 8cc36aec912 "doc: De-duplicate readme and
license files" and 9f1622b018ab "doc: Move content out of readme and
create new index page "), the license.rst file at the root of the git
repo is only telling to look at docs/license.rst file.
Let's point the ARM_TRUSTED_FIRMWARE_LICENSE_FILES to the correct file
and modify the .hash file accordingly.
The comment has also been wrong since we bumped from version 1.4 to 2.2
in commit a757d173f1 (boot/arm-trusted-firmware: bump to version
2.2). Drop referencing an explicit version, so that is is never wrong
again.
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
[yann.morin.1998@free.fr: also fix the comment.]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The files added by this commit are associated both to Nicolas Carrier
and myself in the DEVELOPERS, as this commit is based on initial work
from Nicolas.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit adds a new package called python-flask-expects-json, which
also to validate the JSON blurbs submitted to a Flask web
application. A runtime test is added as well, making sure that the
package minimally works with an example Flask application.
The files added by this commit are associated both to Nicolas Carrier
and myself in the DEVELOPERS file, as Nicolas is also interested in
this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit adds a test for python-flask package. As we are about to
add python-flask-expects-json together with a test, it made sense to
also add a test for python-flask itself.
As far as the DEVELOPERS file is concerned, the test files are added
both to the existing maintainer of package/python-flask, as well as to
myself.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit bumps the python-smmap2 and python-gitdb2 packages in
lockstep, as the new version of gitdb2 requires a newer version of
smmap2, but the current version of gitdb2 cannot work with the newer
version of smmap2 (sigh).
Also, upstream the projects have been renamed: gitdb2 is now named
gitdb on PyPi (see https://pypi.org/project/gitdb2/) and smmap2 is now
named smmap (https://pypi.org/project/smmap2/). However, to avoid
needless churn, we don't rename the Buildroot packages, but that
rename is visible in the name of the tarballs being downloaded.
Also, since version 4.0.0, smmap supports only Python 3.x, so we add a
dependency on Python 3.x and drop the test case of gitdb2 on Python
2.x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In filesystems, variables must be prefixed with ROOTFS_, to avoid
ckashing with packages of the same name.
We do not have a package named 'ext2', so we currently have no clash,
but it is still ebtter that the variables be properly namespaced.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch will add an init script that allows
to set a ruleset in /etc/iptables.conf to be loaded
on boot, or flushed on stop, as well as a saving
command to generate a new file.
Signed-off-by: José Pekkarinen <jose.pekkarinen@unikie.com>
[Arnout: change handling of readonly filesystem]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
mpd 0.22.10 terminates with segmentation fault on graphical clients while
retrieving album information. This bug was fixed in version 0.22.11
Tested on x86_64 using M.A.L.P. Android client
Signed-off-by: Andreas Ziegler <br015@umbiko.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Static build with musl fails since bump to version 2020.04 in commit
fe97212976 because LDFLAGS, which contains
-static, is not passed resulting in the following build failure:
/tmp/instance-1/output-1/host/lib/gcc/arm-buildroot-linux-musleabihf/10.3.0/../../../../arm-buildroot-linux-musleabihf/bin/ld: /tmp/instance-1/output-1/host/lib/gcc/arm-buildroot-linux-musleabihf/10.3.0/libgcc.a(_dvmd_lnx.o): in function `__aeabi_ldiv0':
/tmp/instance-1/output-1/build/host-gcc-final-10.3.0/build/arm-buildroot-linux-musleabihf/libgcc/../../../libgcc/config/arm/lib1funcs.S:1499: undefined reference to `raise'
collect2: error: ld returned 1 exit status
Fixes:
- http://autobuild.buildroot.org/results/d71aba27ff0c7711f2cb67261183506f25217a5f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
On attempt to build ntp with glibc 2.34 the following error happens:
-------------------------------->8------------------------------
In file included from .../output/host/lib/gcc/i586-buildroot-linux-gnu/10.3.0/include-fixed/pthread.h:42,
from work_thread.c:13:
work_thread.c:45:57: error: missing binary operator before token "("
45 | #if defined(PTHREAD_STACK_MIN) && THREAD_MINSTACKSIZE < PTHREAD_STACK_MIN
| ^~~~~~~~~~~~~~~~~
-------------------------------->8------------------------------
That's because starting from glibc 2.34 PTHREAD_STACK_MIN gets determined
dynamically in runtime via sysconf(), see [1].
Original fix proposed by Khem Raj in OpenEmbedded, see [2].
[1] https://sourceware.org/git/?p=glibc.git;a=commit;h=5d98a7dae955bafa6740c26eaba9c86060ae0344
[2] https://github.com/openembedded/meta-openembedded/commit/7055c764c83150f9310ce04bcfb19330460582fc
Suggested-by: Artem Panfilov <artemp@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
ee8b680816 ("utils/scanpypi: use python3 explicitly") started to use python3,
thus compatibility can be removed:
from __future__ import print_function
from __future__ import absolute_import
Tested with python3 -m py_compile.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Python 2 is EOL sice 2020 [1], it's still available on distros, but may not
be installed by default (as being replaced by python3).
Thus remove compatibility imports:
from __future__ import print_function
from __future__ import absolute_import
Tested with python3 -m py_compile.
[1] https://www.python.org/doc/sunset-python-2/
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
A heap buffer overflow vulnerability in msadpcm_decode_block of libsndfile
1.0.30 allows attackers to execute arbitrary code via a crafted WAV file.
https://nvd.nist.gov/vuln/detail/CVE-2021-3246
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes the following security issues:
- CVE-2021-22945: UAF and double-free in MQTT sending
When sending data to an MQTT server, libcurl could in some circumstances
erroneously keep a pointer to an already freed memory area and both use
that again in a subsequent call to send data and also free it again.
https://curl.se/docs/CVE-2021-22945.html
- CVE-2021-22946: Protocol downgrade required TLS bypassed
A user can tell curl to require a successful upgrade to TLS when speaking
to an IMAP, POP3 or FTP server (--ssl-reqd on the command line or
CURLOPT_USE_SSL set to CURLUSESSL_CONTROL or CURLUSESSL_ALL with libcurl).
This requirement could be bypassed if the server would return a properly
crafted but perfectly legitimate response.
This flaw would then make curl silently continue its operations without
TLS contrary to the instructions and expectations, exposing possibly
sensitive data in clear text over the network.
https://curl.se/docs/CVE-2021-22946.html
- CVE-2021-22947: STARTTLS protocol injection via MITM
When curl connects to an IMAP, POP3, SMTP or FTP server to exchange data
securely using STARTTLS to upgrade the connection to TLS level, the server
can still respond and send back multiple responses before the TLS upgrade.
Such multiple "pipelined" responses are cached by curl. curl would then
upgrade to TLS but not flush the in-queue of cached responses and instead
use and trust the responses it got before the TLS handshake as if they
were authenticated.
Using this flaw, it allows a Man-In-The-Middle attacker to first inject
the fake responses, then pass-through the TLS traffic from the legitimate
server and trick curl into sending data back to the user thinking the
attacker's injected data comes from the TLS-protected server.
Over POP3 and IMAP an attacker can inject fake response data.
https://curl.se/docs/CVE-2021-22947.html
In addition, 7.79.1 fixes a number of regressions in 7.79.0:
https://daniel.haxx.se/blog/2021/09/22/curl-7-79-1-patched-up-and-ready/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The file access protection built into Ghostscript proved insufficient for
the "%pipe%" PostScript device, when combined with Ghostscript's requirement
to be able to create and control temporary files in the conventional
temporary file directories (for example, "/tmp" or "/temp). This exploit is
restricted to Unix-like systems (i.e., it doesn't affect Windows). The most
severe claimed results are only feasible if the exploit is run as a "high
privilege" user (root/superuser level) \u2013 a practice we would discourage
under any circumstances.
For more details, see the advisory:
https://ghostscript.com/CVE-2021-3781.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Lynx through 2.8.9 mishandles the userinfo subcomponent of a URI, which
allows remote attackers to discover cleartext credentials because they may
appear in SNI data.
https://lists.nongnu.org/archive/html/lynx-dev/2021-08/msg00002.html
Upstream unfortunately does not provide a public VCS (only source
snapshots), so fetch the security patch from Debian.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This is a minor release which provides fixes for CVE-2021-30858 and
a number of other potential security issues without an associated CVE.
Patch "0001-Add-ldp-and-stp-support-for-FP-registers-plus-some-b.patch"
is deleted as it has been included in this release.
Full release notes can be found at:
https://webkitgtk.org/2021/09/17/webkitgtk2.32.4-released.html
An accompanying security advisory has been published at:
https://webkitgtk.org/security/WSA-2021-0005.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This is a minor release which provides fixes for CVE-2021-30858 and
a number of other potential security issues without an associated CVE.
Patch "0001-Add-ldp-and-stp-support-for-FP-registers-plus-some-b.patch"
is deleted as it has been included in this release.
Full release notes can be found at:
https://wpewebkit.org/release/wpewebkit-2.32.4.html
An accompanying security advisory has been published at:
https://wpewebkit.org/security/WSA-2021-0005.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- SECURITY: Stop splitting on unicode separators in git references,
which could be maliciously used to install a different revision on the
repository. (#9827)
- Update hash of LICENSE.txt (update in year)
- Update indentation in hash file (two spaces)
https://pip.pypa.io/en/stable/news/#v21-2-4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
python-protobuf no longer supports python2, so depend on
BR2_PACKAGE_PYTHON3. Reverse dependencies already depend on
python3.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure with uclibc-ng raised since bump to
version 1.17 in commit 9badccc9d4:
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/lib/gcc/xtensa-buildroot-linux-uclibc/10.3.0/../../../../xtensa-buildroot-linux-uclibc/bin/ld: src/sae.o: in function `sae_rx_authenticate':
sae.c:(.text+0xd74): undefined reference to `reallocarray'
Fixes:
- http://autobuild.buildroot.org/results/c6d3f86282c44645b4f1c61882dc63ccfc8eb35a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The gdbinit supplied by Buildroot does two things:
A. specify the sysroot where gdb can find shared libraries
B. mark the sysroot as a 'safe path' for its auto-load feature, to make sure
that pretty printers for libstdc++.so are added automatically (see commit
6fb3216a80)
When debugging a core file, and the gdbinit file is specified via '-x'
rather than '-ix', then the order of these settings matters: If you first
set the sysroot, then gdb will immediately start finding the shared
libraries it needs for the core file, detect libstdc++ and its associated
libstdc++-gdb.py file, then give a big warning about safe paths:
warning: File ".../i686-buildroot-linux-gnu/sysroot/lib/libstdc++.so.6.0.24-gdb.py"
auto-loading has been declined by your `auto-load safe-path' set
to "$debugdir:$datadir/auto-load".
To enable execution of this file add
add-auto-load-safe-path .../i686-buildroot-linux-gnu/sysroot/lib/libstdc++.so.6.0.24-gdb.py
line to your configuration file "/home/me/.gdbinit".
To completely disable this security protection add
set auto-load safe-path /
line to your configuration file "/home/me/.gdbinit".
For more information about this security protection see the
"Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
info "(gdb)Auto-loading safe path"
and the pretty printing code is not loaded. This is because the second
line from the gdbinit file was not yet parsed at this point.
By changing the order (first configuring the safe path, then setting the
sysroot), this issue does not appear and everything is as expected.
Note that when '-ix' were used instead of '-x' to pass the gdbinit file to
gdb, then the order would not matter, because the entire gdbinit file would
be parsed before considering the core file.
However, even though the Buildroot manual now suggests '-ix', users may not
have noticed this change and continue to use '-x'.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
A gdbinit file passed via '-x' will be read _after_ parsing any
object/core file passed on the command-line. In cross-compilation context,
this is particularly a problem when loading a core file, because without the
'sysroot' specified in the gdbinit file, it will give a lot of warnings,
like:
warning: .dynamic section for "/lib/libstdc++.so.6" is not at the expected address (wrong library or version mismatch?)
warning: .dynamic section for "/lib/librt.so.1" is not at the expected address (wrong library or version mismatch?)
warning: .dynamic section for "/lib/libm.so.6" is not at the expected address (wrong library or version mismatch?)
warning: .dynamic section for "/lib/libgcc_s.so.1" is not at the expected address (wrong library or version mismatch?)
warning: .dynamic section for "/lib/libc.so.6" is not at the expected address (wrong library or version mismatch?)
warning: .dynamic section for "/lib/ld-linux.so.2" is not at the expected address (wrong library or version mismatch?)
warning: .dynamic section for "/lib/libanl.so.1" is not at the expected address (wrong library or version mismatch?)
warning: .dynamic section for "/lib/libdl.so.2" is not at the expected address (wrong library or version mismatch?)
warning: .dynamic section for "/lib/libpthread.so.0" is not at the expected address (wrong library or version mismatch?)
warning: .dynamic section for "/usr/lib/libz.so.1" is not at the expected address (wrong library or version mismatch?)
warning: .dynamic section for "/lib/libnss_files.so.2" is not at the expected address (wrong library or version mismatch?)
warning: Could not load shared library symbols for 17 libraries, e.g. [...]
Use the "info sharedlibrary" command to see the complete listing.
Do you need "set solib-search-path" or "set sysroot"?
In contrast, the '-ix' option will load the specified gdbinit file _before_
parsing object/core files. This will remove said warnings.
See also: https://sourceware.org/bugzilla/show_bug.cgi?id=28330
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The example media-session pipewire session manager requires
pipewire to be built with examples enabled, add support for
enabling this while depending on examples being enabled.
To simplify adding support for additional session managers in
the future such as wireplumber we pass a comma separated list
to the -Dsession-managers meson config option. This also will
ensure that systemd services that depend on media-session are
only installed if media-session support is enabled.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
To avoid spending some time to build the x86_64 toolchain (~20min),
switch to corei7 cpu (Nahalem) and use the prebuilt Bootlin toolchain.
We have to use the "stable" Bootlin toolchain to use the same kernel version
for the toolchain kernel headers and the running kernel.
With the "bleeding-edge" toolchain we have the "kernel too old" issue
(running kernel 4.19 vs kernel headers 5.4)
Runtime tested locally.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Switch from the Buildroot internal toolchain for armv5 to
the prebuilt Bootlin external toolchain.
The test doesn't require to build a toolchain, there was
no prebuilt glibc toolchain recent enough at the time this
test has been introduced.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This test already use builtin kernel provided by the testsuite infra:
self.emulator.boot(arch="armv7",
kernel="builtin",
options=["-initrd", img])
But a second kernel is build from the its defconfig. This second kernel
is not used by the test.
The TestRust (using BR2_PACKAGE_HOST_RUST=y) is really long to build,
save some cpu time by removing the kernel build.
This unused kernel (based on 4.11.3 release) doesn't even build with
host gcc >= 10.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The kernel 5.5.7 curently used by the test doesn't build with host
gcc >= 10 due the gcc default -fno-common. See GCC 10 porting guide [1].
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x20): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
But we can't just update this test to the next linux kernel LTS 5.10.y since
the minimum gcc version has been updated to gcc 4.9 since 5.8 kernel [2]
and the Sourcery CodeBench ARM 2014.05 is used (gcc 4.8 based).
Enable arm cortex A9 and VFP support to switch to the ARM arm prebuilt
toolchain (the Bootlin toolchain could be used).
While at it use the prebuilt buildin kernel for the vexpress target
recently updated to 5.10.7.
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/1564202094
[1] https://gcc.gnu.org/gcc-10/porting_to.html
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6ec4476ac82512f09c94aff5972654b70f3772b2
[3] 3cf2782906
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The kernel 4.16.7 curently used by the test doesn't build with host
gcc >= 10 due the gcc default -fno-common. See GCC 10 porting guide [1].
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x20): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
Bump to the next LTS release.
[1] https://gcc.gnu.org/gcc-10/porting_to.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The kernel 4.16.7 curently used by the test doesn't build with host
gcc >= 10 due the gcc default -fno-common. See GCC 10 porting guide [1].
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x20): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
Bump to the next LTS release.
[1] https://gcc.gnu.org/gcc-10/porting_to.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The kernel 4.11.3 curently used by the test doesn't build with host
gcc >= 10 due the gcc default -fno-common. See GCC 10 porting guide [1].
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x20): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
Bump to the next LTS release.
[1] https://gcc.gnu.org/gcc-10/porting_to.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The kernel 4.11.3 curently used by the test doesn't build with host
gcc >= 10 due the gcc default -fno-common. See GCC 10 porting guide [1].
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x20): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
Bump to the next LTS release.
[1] https://gcc.gnu.org/gcc-10/porting_to.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update to version 0.10.1, which fixes the build when the DRM platform
module is enabled, fixes handling of absolute pointer events, and makes
the headless platform optional.
Although the headless platform is optional, Buildroot keeps it enabled
unconditionally (as previously) because the wpebackend-fdo dependency
is always needed anyway because Buildroot does not include any other
WPE backend.
Release notes:
https://wpewebkit.org/release/cog-0.10.1.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Also create a pipewire user, which is used for systemd service. There is
no sysvinit start script at the moment, but if there were, it should
also take care of changing the uid to pipewire before starting the
daemon.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add simple mixer python bindings to build when "Python support for
alsa-lib" is active. smixer-python is the only python module which
exists in alsa-lib. It is compatible with Python2 and Python3.
Signed-off-by: Illia Bitkov <illia.bitkov@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Added patch fixes linkage of libgc with external libtomic-ops.
Mono uses bundeled bdwgc which doesn't link external libatomic-ops.
Patch is a fix cherry-picked from bdwgc upstream.
Problem found on ARMv5 processors, on newer ARM processors
it uses header based functions and doesn't need built library.
Error:
/home/buildroot/autobuild/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/9.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: ../../external/bdwgc/.libs/libgc.a(gc.o): in function `GC_steal_mark_stack':
gc.c:(.text+0x2020): undefined reference to `AO_store_full_emulation'
Fixes:
http://autobuild.buildroot.net/results/ebc54e5dea63aca21a4072d294fdede41de559c7http://autobuild.buildroot.net/results/6d10a4bd43fbc9c1d3fa26d5eef394c8023cb85f
Signed-off-by: Illia Bitkov <illia.bitkov@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
license is now LGPL-3.0+ for both talloc and pytalloc. Therefore, remove
pytalloc.h from the license files.
Signed-off-by: David GOUARIN <david.gouarin@thalesgroup.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
If the toolchain does not have threads (e.g. br-arm-full-nothread),
compilation fails:
In file included from /home/fail/br-test-pkg/br-arm-full-nothread/build/libressl-3.3.3/crypto/cryptlib.c:117:
/home/fail/br-test-pkg/br-arm-full-nothread/build/libressl-3.3.3/crypto/../include/compat/pthread.h:114:15: fatal error: pthread.h: No such file or directory
114 | #include_next <pthread.h>
| ^~~~~~~~~~~
compilation terminated.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
COPYING was updated with a copy of the openssl licence since libgit2 now
include openssl headers so it can dlopen it:
openssl: dynamically load libssl and symbols (optionally)
Provide an interface around OpenSSL to dynamically load the
libraries and symbols, so that users can distribute a libgit2
library that is not linked directly against OpenSSL. This enables
users to target multiple distributions with a single binary.
This mechanism is optional and disabled by default. Configure cmake
with -DUSE_HTTPS=OpenSSL-Dynamic to use it.
We do not use that option so the headers are not even used, plus the
headers are not installed on the target anyway, so this patch includes
no license changes.
Upstream also stopped providing release tarballs, relying on
github-generated tarballs instead.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Plus, use two spaces for indentation in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
License updated with a minor change at the copyright year.
SETUP_TYPE changed to setuptools.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Don't require wayland-scanner if tests are disabled to avoid the
following build failure raised since bump to version 1.23 in commit
7eedc9cc1e:
Build-time dependency wayland-scanner found: NO (tried pkgconfig and cmake)
../output-1/build/wayland-protocols-1.23/meson.build:11:0: ERROR: Dependency "wayland-scanner" not found, tried pkgconfig and cmake
Fixes:
- http://autobuild.buildroot.org/results/2744e50465a9cd9d3726d23298ad6c943ef49a21
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr:
- do not default to 'y'
- add comment
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
mesa3d uses very big switch statements, which causes the build to fail
on m68k, beause the offsets there are only 16-bit.
We fix that by using -mlong-jump-table-offsets on m68k, to use 32-bit
offsets for switch statements, but this is only available starting with
gcc 7 [0] [1].
Fixes:
http://autobuild.buildroot.net/results/60c4653c2a93125edbdd0beb43cd47301643464a/
Note: we have two packages that select mesa3d, but:
package/intel-mediadriver/
-> already depends on x86_64, so implies !m68k
package/x11r7/xdriver_xf86-video-imx-viv/
-> imx is an ARM, but xdriver_xf86-video-imx-viv is missing
a depends on BR2_arm (although the comments do have that
dependency). However, it depends on other imx related
packages, and they depend on either arm or aarch64, so
that implies !m68k.
As such, we do not need to propagate that new dependency.
[0] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=57583#c15
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=57583#c16
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr:
- add comment
- reword commit log, add BZ references, add non-propagation notes
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We need to backport a few upstream still-pending PRs, to fix
cross-compilation, out-of-tree installation, and to relax requirements
on some tools.
The python support PR is backported too, but because python support was
not tested, it is forcibly disabled.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr:
- expand commit log with explanations
- backport upstream 253 (python) too
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump libfuse3 to version 3.10.5 and remove local patch that has been
upstreamed.
Release notes:
Various improvements to make unit tests more robust.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure with glibc >= 2.34:
ulockmgr_server.c:127:12: error: conflicting types for 'closefrom'; have 'int(int)'
127 | static int closefrom(int minfd)
| ^~~~~~~~~
In file included from ulockmgr_server.c:14:
/home/buildroot/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/unistd.h:363:13: note: previous declaration of 'closefrom' with type 'void(int)'
363 | extern void closefrom (int __lowfd) __THROW;
| ^~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/3769b18ca804fba3b5974af799972a7d889b39a6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The AKA backend for 3GPP2 requires libgmp (see
https://wiki.strongswan.org/projects/strongswan/wiki/Autoconf). Since
the AKA backend for 3GPP2 is included by BR2_PACKAGE_STRONGSWAN_EAP,
when selecting a crypto backend different from
BR2_PACKAGE_STRONGSWAN_GMP, there is no guarantee the gmp package is
selected as well. When doing so, make fails since the package is in the
dependency chain but not selected:
$ make
Makefile:585: *** gmp is in the dependency chain of strongswan that has added it to its _DEPENDENCIES variable without selecting it or depending on it from Config.in. Stop.
make: *** [Makefile:23: _all] Error 2
To fix this, select BR2_PACKAGE_GMP when selecting BR2_PACKAGE_STRONGSWAN_EAP.
Signed-off-by: Martin Elshuber <martin.elshuber@theobroma-systems.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following security issues:
- CVE-2021-28902: In function read_yin_container() in libyang <= v1.0.225,
it doesn't check whether the value of retval->ext[r] is NULL. In some
cases, it can be NULL, which leads to the operation of
retval->ext[r]->flags that results in a crash.
- CVE-2021-28903: A stack overflow in libyang <= v1.0.225 can cause a denial
of service through function lyxml_parse_mem(). lyxml_parse_elem()
function will be called recursively, which will consume stack space and
lead to crash.
- CVE-2021-28904: In function ext_get_plugin() in libyang <= v1.0.225, it
doesn't check whether the value of revision is NULL. If revision is NULL,
the operation of strcmp(revision, ext_plugins[u].revision) will lead to a
crash.
- CVE-2021-28905: In function lys_node_free() in libyang <= v1.0.225, it
asserts that the value of node->module can't be NULL. But in some cases,
node->module can be null, which triggers a reachable assertion (CWE-617).
- CVE-2021-28906: In function read_yin_leaf() in libyang <= v1.0.225, it
doesn't check whether the value of retval->ext[r] is NULL. In some cases,
it can be NULL, which leads to the operation of retval->ext[r]->flags that
results in a crash.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Changelog (since 1.14, from [1]):
ver 1.17:
Fix issue with sending additional and vendor IEs.
Fix issue with IE ordering for 802.11-2020 support.
Fix issue with frequency update on channel switch events.
Fix issue with drivers and handling of IF_OPER_UP setting.
ver 1.16:
Fix issue with writing provisioning files with a passphrase.
Add support for Authenticator & Supplicant RSN Extension elements.
Add support for handling Transition Disable info.
Add support for SAE Hash-to-Element feature.
ver 1.15:
Add support for FT-over-DS procedure with multiple BSS.
Add support for estimation of VHT RX data rate.
Add support for exporting Daemon information.
[1] https://git.kernel.org/pub/scm/network/wireless/iwd.git/tree/ChangeLog
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Changelog (since 0.41, from [1]):
ver 0.43:
Add support for DHCP Rapid Commit feature.
Add support for DHCP authoritative mode feature.
ver 0.42:
Add support for constant time security functions.
Add support for manipulating DHCP leases.
[1] https://git.kernel.org/pub/scm/libs/ell/ell.git/tree/ChangeLog
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure with glibc >= 2.34:
/tmp/instance-0/output-1/host/lib/gcc/s390x-buildroot-linux-gnu/10.3.0/../../../../s390x-buildroot-linux-gnu/bin/ld: CMakeFiles/egltrace.dir/dlsym.cpp.o: in function `dlsym':
dlsym.cpp:(.text+0x34): undefined reference to `__libc_dlopen_mode'
/tmp/instance-0/output-1/host/lib/gcc/s390x-buildroot-linux-gnu/10.3.0/../../../../s390x-buildroot-linux-gnu/bin/ld: dlsym.cpp:(.text+0x46): undefined reference to `__libc_dlsym'
Fixes:
- http://autobuild.buildroot.org/results/ac5e5b1e30249ae0fb8b9179338b47c60c026bcc
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
CVE-2021-29221 is a Windows specific issue:
A local privilege escalation vulnerability was discovered in Erlang/OTP
prior to version 23.2.3. By adding files to an existing installation's
directory, a local attacker could hijack accounts of other users running
Erlang programs or possibly coerce a service running with "erlsrv.exe" to
execute arbitrary code as Local System. This can occur only under specific
conditions on Windows with unsafe filesystem permissions.
So ignore it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following security issue:
- CVE-2021-40529: The ElGamal implementation in Botan through 2.18.1, as
used in Thunderbird and other products, allows plaintext recovery because,
during interaction between two cryptographic libraries, a certain
dangerous combination of the prime defined by the receiver's public key,
the generator defined by the receiver's public key, and the sender's
ephemeral exponents can lead to a cross-configuration attack against
OpenPGP
For more details, see the upstream bug and issue writeup:
- https://github.com/randombit/botan/pull/2790
- https://ibm.github.io/system-security-research-updates/2021/07/20/insecurity-elgamal-pt1
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following security issues:
- CVE-2021-37701: Arbitrary File Creation/Overwrite via insufficient symlink
protection due to directory cache poisoning using symbolic links
- CVE-2021-37712: Arbitrary File Creation/Overwrite via insufficient symlink
protection due to directory cache poisoning using symbolic links
- CVE-2021-37713: Arbitrary File Creation/Overwrite on Windows via
insufficient relative path sanitization
- CVE-2021-39134: UNIX Symbolic Link (Symlink) Following in @npmcli/arborist
- CVE-2021-39135: UNIX Symbolic Link (Symlink) Following in @npmcli/arborist
For more details, see the advisory:
https://nodejs.org/en/blog/vulnerability/aug-2021-security-releases2/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As the github repository has changed from github.com/AdoptOpenJDK/ to
github.com/adoptium, both versions are updated in the same patch.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
For the i.MX8 often an Image.gz is built. With these changes, if
BR2_LINUX_KERNEL_IMAGEGZ=y, the correct Image.gz file is now put into
the generated image instead of falling back to the non-existent zImage.
Signed-off-by: Hanspeter Portner <dev@open-music-kontrollers.ch>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The Key Distribution Center (KDC) in MIT Kerberos 5 (aka krb5) before
1.18.5 and 1.19.x before 1.19.3 has a NULL pointer dereference in
kdc/do_tgs_req.c via a FAST inner body that lacks a server field.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 148e695e37 (package/kodi: bump version to 19.0-Matrix) extended
the set of required libraries for various "platform" backends, by
selecting those libraries from the blind options. For example, we have:
config BR2_PACKAGE_KODI_PLATFORM_SUPPORTS_GBM
bool
default y
depends on [...]
select BR2_PACKAGE_LIBINPUT
[...]
However, that option is true as soon as the requirements are met (the
depends on), even when Kodi itself is not enabled.
This means that extra libraries are pulled in to the build, even when
not required.
We fix that by moving the actual selects to the main symbol, along with
the proper conditions. This means that we have two lines that select
libxbcommon, under two different conditions; we could make that a single
select, but the codition would need to be on two lines anyway, so meh...
This is not an ideal solution, because it is a bit ugly, but:
1) adding three new blind options just for the select is kinda extreme
and superfluous;
2) our Kodi packaging is already a bit ugly anyway.
Fixes: #14206
Reported-by: Thomas Ruschival <t.ruschival@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
In order to add support for EFI-compatible ISO9660 images in future
patches, this commit switch the ISO9660 logic to use xorriso instead of
cdrkit. Indeed the genimageiso tool from cdrkit doesn't have the
--efi-boot option needed to generate an image compatible with EFI BIOS.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[yann.morin.1998@free.fr: drop superfluous tool name from variable]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We will soon use xorriso in the ISO9660 image generation support, and
this requires having zlib support in host-xorriso.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure with gcc 4.8 raised since bump to
version 0.6.23 in commit e2f8050976:
exif-gps-ifd.c: In function 'exif_get_gps_tag_info':
exif-gps-ifd.c:62:3: error: 'for' loop initial declarations are only allowed in C99 mode
for (int i = 0; i < sizeof(exif_gps_ifd_tags) / sizeof(ExifGPSIfdTagInfo); ++i) {
^
exif-gps-ifd.c:62:3: note: use option -std=c99 or -std=gnu99 to compile your code
Fixes:
- http://autobuild.buildroot.org/results/7dd222e06d1e6611449fb8fe7516817c9ad43d65
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2021-3634: A flaw has been found in libssh in versions prior to
0.9.6. The SSH protocol keeps track of two shared secrets during the
lifetime of the session. One of them is called secret_hash and the other
session_id. Initially, both of them are the same, but after key
re-exchange, previous session_id is kept and used as an input to new
secret_hash. Historically, both of these buffers had shared length
variable, which worked as long as these buffers were same. But the key
re-exchange operation can also change the key exchange method, which can
be based on hash of different size, eventually creating "secret_hash" of
different size than the session_id has. This becomes an issue when the
session_id memory is zeroed or when it is used again during second key
re-exchange.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
protobuf moved from the google org to protocolbuffers in 2018.
There is a redirect but we should use the official url.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
pause() is defined in glibc since the very early times; it appears in
upstream commit 28f540f45bba (initial import) in 1995 [0].
Bluez has been defining a function named pause() for ages too, since
comit caab74c97542 (media: Implement new callbacks for pass-through
operations) in 2013 [1]
With the recent bump to glibc 2.34.xxx, the build now fails because the
two pause() clash:
profiles/audio/media.c:1284:13: error: conflicting types for 'pause'
1284 | static bool pause(void *user_data)
| ^~~~~
In file included from /tmp/instance-0/output-1/per-package/bluez5_utils/host/s390x-buildroot-linux-gnu/sysroot/usr/include/bits/sigstksz.h:24,
from /tmp/instance-0/output-1/per-package/bluez5_utils/host/s390x-buildroot-linux-gnu/sysroot/usr/include/signal.h:328,
from /tmp/instance-0/output-1/per-package/bluez5_utils/host/bin/../s390x-buildroot-linux-gnu/sysroot/usr/include/glib-2.0/glib/gbacktrace.h:36,
from /tmp/instance-0/output-1/per-package/bluez5_utils/host/bin/../s390x-buildroot-linux-gnu/sysroot/usr/include/glib-2.0/glib.h:34,
from profiles/audio/media.c:21:
/tmp/instance-0/output-1/per-package/bluez5_utils/host/s390x-buildroot-linux-gnu/sysroot/usr/include/unistd.h:489:12: note: previous declaration of 'pause' was here
489 | extern int pause (void);
| ^~~~~
The culprit is indeed glibc 2.34, as can be seen in this result matrix:
\ bluez5_utils
glibc \ 5.60 | 5.61
-------\-------+--------
2.33 | OK | OK
-------+-------+--------
2.34 | KO | KO
Even though we first bumped to glibc 2.34, then to blues5_utils 5.61,
we did not notice build issues with bluez5_utils 5.60 because the two
bumps were too close to each other for the failure to trigger in the
autobuilders.
The underlying reason that pause() is now causing issues with glibc 2.34
is not obvious: glibc is a big beast, and finding such issues is not
easy. However, we can see that the pause() provided by NPTL has been
dropped in favour of the generic one, so maybe this is causing symbol
visibility or weakness to change or something...
We fix that by renaming the local pause() in bluez5_utils with a
namespace-prefix, like some other functions there already have.
Fixes:
- http://autobuild.buildroot.org/results/c4f/c4fbface34be8815838fd7201621d7a8fddd32c5/
- http://autobuild.buildroot.org/results/62b/62b88740f19fbe4a1ad7959dc141d539eb88c1f8/
[0] https://sourceware.org/git/?p=glibc.git;a=commit;h=28f540f45bbacd939bfd07f213bcad2bf730b1bf
[1] https://github.com/bluez/bluez/commit/caab74c97542a56b591f0b16b44ab6ba4b40f0f5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: extend commit log with the glibc culprit]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* add changelog and Signed-off-by to patches
* use correct name for patch 0002
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
xdg is needed (and can't be make optional as it is unconditionally used
in pulseaudio.fc) to fix the following build failure raised since commit
bf44a11cf6:
Compiling targeted policy.33
env LD_LIBRARY_PATH="/tmp/instance-0/output-1/host/lib:/tmp/instance-0/output-1/host/usr/lib" /tmp/instance-0/output-1/host/usr/bin/checkpolicy -c 33 -U deny -S -O -E policy.conf -o policy.33
policy/modules/apps/pulseaudio.te:44:ERROR 'attribute xdg_config_type is not declared' at token ';' on line 317285:
#line 44
typeattribute pulseaudio_xdg_config_t xdg_config_type;
checkpolicy: error(s) encountered while parsing configuration
make[1]: *** [Rules.monolithic:79: policy.33] Error 1
Fixes:
- http://autobuild.buildroot.org/results/818219c0f722080d9f6ef778fdc50e34dd4187ab
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update download to use official gitlab source url.
Drop patches that are now upstream.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The mainline U-Boot can create an i.MX specific firmware image (e.g. flash.bin).
For this the i.MX firmware files (DDR, HDMI) must be in the toplevel directory.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
[yann.morin.1998@free.fr: simplify hook]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The version bump [1] for the rpm package to v4.17 added the newly
required dependency to Lua; however, the change limited support to only
v5.3 (and not higher). Correcting support for v5.3 or higher by making
a dependency on the Lua package and omitting older versions which are
not supported (specifically, the v5.1 series)
[1]: 429e247b86
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
openjdk needs host gcc >= 4.9 since bump to version 16.0.1+9 in commit
057e27029c and
https://github.com/openjdk/jdk/commit/2a8f92e7e71f7c1ed4010fa31f4b413758c8752a:
configure: Using gcc BuildC compiler version 4.8.5 [cc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44)]
configure: Using gcc BuildC++ compiler version 4.8.5 [g++ (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44)]
configure: Using gcc build linker version 2.27 [GNU ld version 2.27-44.base.el7]
[...]
g++: error: unrecognized command line option '-std=c++14'
Add a dependency on host gcc >= 4.9 for the OpenJDK 16 version only, so
that users can still use OpenJDK 11 on older distributions.
Fixes:
- http://autobuild.buildroot.org/results/7072308d148ccb8237180729551df65c87a76f11
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: limit the dependency to OpenJDK 16]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following recursive dependency added with commit
429e247b86:
package/openssl/Config.in:4:error: recursive dependency detected!
package/openssl/Config.in:4: symbol BR2_PACKAGE_OPENSSL is selected by BR2_PACKAGE_LIBGCRYPT
package/libgcrypt/Config.in:1: symbol BR2_PACKAGE_LIBGCRYPT is selected by BR2_PACKAGE_OPENSSL
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If the ATF binary is used by U-Boot, the file is expected to be in the
toplevel directory.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In mainline u-boot more and more imx8 boards are switched to binman
to create the imx specific image (flash.bin). To support this the
(lp)ddr firmware training files are needed. For this to work all files
should be made available to the U-Boot build.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Force relative file path resolution of DEVELOPERS file entries to use
forward-slash separators since pattern matching assumes forward slashes.
This is to help permit uses invoking `get-developers` on Platforms where
`os.sep` may not be a forward slash.
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Adjust the inclusion of the rpm2archive command as an option, to allow a
developer to opt-out of building/including the command if it is not
desired/needed for the target.
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix MKIMAGE_ARCH handling to avoid the following build failure:
/home/buildroot/autobuild/instance-0/output-1/build/host-uboot-tools-2021.07/tools/mkimage -C none -A openrisc -T script -d /home/buildroot/autobuild/instance-0/output-1/boot_script.txt /home/buildroot/autobuild/instance-0/output-1/build/host-uboot-tools-2021.07/tools/boot.scr
Invalid architecture, supported are:
alpha Alpha
arc ARC
arm ARM
arm64 AArch64
avr32 AVR32
blackfin Blackfin
ia64 IA64
invalid Invalid ARCH
m68k M68K
microblaze MicroBlaze
mips MIPS
mips64 MIPS 64 Bit
nds32 NDS32
nios2 NIOS II
or1k OpenRISC 1000
powerpc PowerPC
riscv RISC-V
s390 IBM S390
sandbox Sandbox
sh SuperH
sparc SPARC
sparc64 SPARC 64 Bit
x86 Intel x86
x86_64 AMD x86_64
xtensa Xtensa
Strangely enough, we only have autobuilder failures since July 2021 even
as or1k has been used since the addition of openriscv support in 2012:
https://github.com/u-boot/u-boot/commit/3ddcaccda3824e1c7f7266d543e4c0eb3ea9851c
For x86)64, we incorrectly mangle it to x86.
Finally, the comment about mips64 is wrong: mips64 *is* a valid
archtecture, and we anyway had no code to tweak that case.
Fixes:
- http://autobuild.buildroot.org/results/c3f0f2a3fb87d74bfdaccf9b94c66f0b5bae7520
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: extend commit log for mips64 and x86_64]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Build is broken since bump to version 3.0.0 in commit
45524f10cd because libxslt is needed
instead of expat since
https://github.com/arut/nginx-dav-ext-module/commit/37772c545314aa4a250066f4e7cbc8806d406fa8:
adding module in /tmp/instance-0/output-1/build/nginx-dav-ext-3.0.0
+ ngx_http_dav_ext_module was configured
checking for PCRE library ... found
checking for PCRE JIT support ... found
Package libxslt was not found in the pkg-config search path.
Perhaps you should add the directory containing `libxslt.pc'
to the PKG_CONFIG_PATH environment variable
Package 'libxslt', required by 'virtual:world', not found
Package libxslt was not found in the pkg-config search path.
Perhaps you should add the directory containing `libxslt.pc'
to the PKG_CONFIG_PATH environment variable
Package 'libxslt', required by 'virtual:world', not found
checking for libxslt ... not found
checking for libxslt in /usr/local/ ... not found
checking for libxslt in /usr/pkg/ ... not found
checking for libxslt in /opt/local/ ... not found
./configure: error: the HTTP XSLT module requires the libxml2/libxslt
libraries. You can either do not enable the module or install the libraries.
Fixes:
- http://autobuild.buildroot.org/results/8735d20ca7ccf4eda2f79f9400bed70474855b40
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that the qemu package has the BR2_PACKAGE_HOST_QEMU_USER_MODE_ARGS string,
the gobject-introspection g-ir-scanner-qemuwrapper script can pass that string
to qemu.
Add the QEMU_USERMODE_ARGS to g-ir-scanner-qemuwrapper.in and unconditionally
sed @QEMU_USERMODE_ARGS@ with BR2_PACKAGE_HOST_QEMU_USER_MODE_ARGS.
Fixes:
http://autobuild.buildroot.org/results/2e9dbc0d36600c09fa9e59ab1b1903c9f40661e8
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Arnout: don't add QEMU_USERMODE_ARGS variable to shell script]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
For specific architectures, running qemu in user mode without any additional
options may fail if the host processor does not have the necessary instructions
to properly run qemu in user mode, which results in the following error:
"qemu: uncaught target signal 4 (Illegal instruction) - core dumped"
CoreI7 is one such architecture that has had consistent auto-build failures.
Add a new string in qemu/Config.in.host: BR2_PACKAGE_HOST_QEMU_USER_MODE_ARGS.
The default for the Corei7 architecture is directly from the OpenEmbedded
project found in meta/conf/machine/include/x86/tune-corei7.inc:
"-cpu Nehalem,check=false." Other architectures may be added to this string at
a later date if other failures occure.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Add double quotes to prevent globbing and word splitting.
- Add indentations of continuation lines.
- Disable SC2181 and SC2016 as we explicitly do not want the variables
expanded in the echo.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
If GIR_EXTRA_LIBS_PATH is empty, the LD_LIBRARY_PATH variable is
":.libs:$(dirname $0)/../lib:$(dirname $0)/../../lib".
As discussed with Yann Morin, add a new variable, "GOI_LIBRARY_PATH" and
prepend ${GIR_EXTRA_LIBS_PATH:+${GIR_EXTRA_LIBS_PATH}:} to the path to fix the
above bug.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following static build failure on musl which is raised because
the "Check for directory libraries" in configure wrongly adds -DNO_DIR
when no directory library is needed:
/tmp/instance-0/output-1/host/bin/arm-buildroot-linux-musleabihf-gcc -c -D_FILE_OFFSET_BITS=64 -O2 -g0 -static -I. -DUNIX -DUIDGID_NOT_16BIT -DBZIP2_SUPPORT -DLARGE_FILE_SUPPORT -DUNICODE_SUPPORT -DNO_MKTIME -DNO_DIR -DHAVE_DIRENT_H -DHAVE_TERMIOS_H unix/unix.c
unix/unix.c:70:14: error: conflicting types for 'DIR'
70 | typedef FILE DIR;
| ^~~
Fixes:
- http://autobuild.buildroot.org/results/83a6e0c8c4ad026cb0261246e3b1a80d754454bd
Patch not sent upstream since upstream is dead.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update to gcc 10.3, gdb 10.2, binutils 2.36.1, glibc 2.33.
Remove BR2_TOOLCHAIN_HAS_NATIVE_RPC since the support for obsolete
RPC was finally dropped in glibc in 2.32 (2020-08-04).
See "Release Note":
https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads#
Tested with qemu_aarch64_virt_defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update to gcc 10.3, gdb 10.2, binutils 2.36.1, glibc 2.33.
Remove BR2_TOOLCHAIN_HAS_NATIVE_RPC since the support for obsolete
RPC was finally dropped in glibc in 2.32 (2020-08-04).
See "Release Note":
https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads#
Tested with qemu_arm_vexpress_defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Switch to meson-package to fix the following build failure raised since
bump of gobject-introspection to version 1.68.0 in commit
abc110e362:
Could not find GIR file 'Gio-2.0.gir'; check XDG_DATA_DIRS or use --includedir
error parsing file Polkit-1.0.gir: Failed to parse included gir Gio-2.0
If the above error message is about missing .so libraries, then setting up GIR_EXTRA_LIBS_PATH in the .mk file should help.
Typically like this: PKG_MAKE_ENV += GIR_EXTRA_LIBS_PATH="$(@D)/.libs"
Fixes:
- http://autobuild.buildroot.org/results/26bcb21900b403db690d6005dbef0a76ff494d6c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump the version to 1661 and remove the patch
0002-Remove-unused-global-variable-to-fix-compilation-with-GCC-10.patch.
This patch is no longer needed because the fix has been added upstream.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
environment-setup uses BASH_SOURCE which is bash specific. For other
shells, this variable is empty, leading to an error message and empty
SDK_PATH.
Zsh Uses $0. Unfortunately POSIX is not specifying how exactly $0
should behave when in sourced (or using special dot utility). So other
shell support have to be implemented in different manner.
Signed-off-by: Krzysztof Kanas <kkanas@fastmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Set includedir to $(STAGING_DIR)/usr/share/gir-1.0 instead of . in
Makefile.introspection or g-ir-compiler won't find .gir files resulting
in a build failure for autotools-based based programs such as gconf
since bump of gobject-introspection to version 1.68.0 in commit
abc110e362:
Could not find GIR file 'GObject-2.0.gir'; check XDG_DATA_DIRS or use --includedir
error parsing file GConf-2.0.gir: Failed to parse included gir GObject-2.0
Fixes:
- http://autobuild.buildroot.org/results/8180d893cbd27512915a7f8a3adb232b93a98ceb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Long ago, before SMCRoute had yet become a proper daemon and standalone
control tool, it was both. After the metamorphosis commands and options
had changed, a compat script was added to provide a smooth transition.
The compat script is still shipped in the tarball, and installed, but
only Debian still relies on it, so we prune it here to keep confusion
to a minimum, hopefully.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Same start order as mrouted, start after networking is up.
Custom command line options, like startup delay, or disable multicast
routing by default, can be added to the optional /etc/default/smcroute
env. file.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Upstream has changed to tar.gz
- Drop _SOURCE, fixes check-package warning
- setpgrp not used anymore, no need to override configure cache
- Makefile no longer uses CC?=, drop comment
- Enable MRDISC build option, must be activated per phyint in
smcroute.conf, so safe to enable as a default build option
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Also correct the comment about installing the minified js file, which
was changed with the update to 3.0.5 in commit 42bf38dca.
Signed-off-by: Thomas Claveirole <thomas.claveirole@green-communications.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Install progress/usb services for swupdate based on meta-swupdate
configs.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since the website depends on the webserver being enabled we should
add a config option for it and make the website depend on that.
We should also ensure that the mongoose(webserver) config is present.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This needs to be set properly so that services work correctly.
Enable disable automatically based on BR2_PACKAGE_SYSTEMD state.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This ensures all tools/libraries will be properly installed.
Update SWUPDATE_BUILD_CMDS param ordering for consistency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The swupdate services do not depend on
BR2_PACKAGE_SWUPDATE_INSTALL_WEBSITE, so install them unconditionally.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In buildroot, stripping for the target is configured and implemented
with the global `BR2_STRIP_strip` option that drive the stripping in
the target-finalize step.
So, we explicitly disable stripping at build time for swupdate.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure on uclibc-ng raised since bump to
version 6.0.0 in commit 6b86c9335f:
../block/export/fuse.c: In function 'fuse_lseek':
../block/export/fuse.c:641:19: error: 'SEEK_HOLE' undeclared (first use in this function)
641 | if (whence != SEEK_HOLE && whence != SEEK_DATA) {
| ^~~~~~~~~
../block/export/fuse.c:641:19: note: each undeclared identifier is reported only once for each function it appears in
../block/export/fuse.c:641:42: error: 'SEEK_DATA' undeclared (first use in this function); did you mean 'SEEK_SET'?
641 | if (whence != SEEK_HOLE && whence != SEEK_DATA) {
| ^~~~~~~~~
| SEEK_SET
Fixes:
- http://autobuild.buildroot.org/results/33c90ebf04997f4d3557cfa66abc9cf9a3076137
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch adds runtime testing of the OCI archive created by the
sloci scripting. It launches a containerd instance, imports, and
runs the OCI container.
The existing QEMU AARCH64 kernel config was extended to enable common
options used by a container runtime (cgroup and overlayfs).
Signed-off-by: Matthew Weber <matthew.weber@collins.com>
[Arnout: adapt file name which is arm64 now; add to DEVELOPERS]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add support to generate OCI (Open Container Initiative) images.
An OCI image consists of a manifest, an image index (optional), a set of
filesystem layers, and a configuration. The complete specification is
available in the link below:
https://github.com/opencontainers/image-spec/blob/master/spec.md
The image is generated with the host tool sloci-image, and config
options can be used to configure image parameters.
By default, the image is generated in a directory called rootfs-oci:
$ cd output/images
$ ls rootfs-oci/
blobs index.json oci-layout
Optionally, the image can be packed into a tar archive.
The image can be pushed to a registry using containers tools like
skopeo:
$ skopeo copy --dest-creds <user>:<pass> oci:rootfs-oci:<tag> \
docker://<user>/<image>[:tag]
And then we can pull/run the container image with tools like docker:
$ docker run -it <user>/<image>[:tag]
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Matthew Weber <matthew.weber@collins.com>
[Arnout:
- mention in help text that options are space separated;
- use GO_GOARCH and GO_GOARM for architecture;
- quote all arguments;
- don't cd to BINARIES_DIR;
- remove ROOTFS_OCI_IMAGE_NAME variable;
- remove wildcard from rm.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
sloci-image is a simple CLI tool for packing rootfs into a single-layer
OCI image.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Matthew Weber <matthew.weber@collins.com>
[Arnout: correctly set PREFIX, add Matt to DEVELOPERS, add additional
patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised since commit
d39d8f7cee:
In file included from /home/buildroot/autobuild/instance-3/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/include/boost/math/common_factor.hpp:14,
from /home/buildroot/autobuild/instance-3/output-1/build/gnuradio-3.8.2.0/gr-digital/lib/symbol_sync_cc_impl.cc:30:
/home/buildroot/autobuild/instance-3/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/include/boost/math/common_factor_ct.hpp:17:68: error: _Pragma takes a parenthesized string literal
17 | BOOST_MATH_HEADER_DEPRECATED("<boost/integer/common_factor_ct.hpp>");
|
Fixes:
- http://autobuild.buildroot.org/results/7b4/7b46f51588144bca1d323230c378ce7f6ee999a8/build-end.log
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure with glibc >= 2.34:
In file included from /tmp/instance-0/output-1/host/arc-buildroot-linux-gnu/sysroot/usr/include/bits/local_lim.h:81,
from /tmp/instance-0/output-1/host/arc-buildroot-linux-gnu/sysroot/usr/include/bits/posix1_lim.h:161,
from /tmp/instance-0/output-1/host/arc-buildroot-linux-gnu/sysroot/usr/include/dirent.h:233,
from automount.c:22:
automount.c:87:37: error: initializer element is not constant
87 | size_t detached_thread_stack_size = PTHREAD_STACK_MIN * 144;
| ^~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/0c8ab8968b2adf6a5f8eeab00ce388968fa1c1d5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update SITE to be synced with bayer2rgb-neon.
Use git as METHOD because no tarball is available for this version.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
sox also provides one or more libraries with headers, so also install
sox to staging.
Signed-off-by: Adrian Amaglio <nainformatique@gresille.org>
[Giulio: reword commit log]
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr:
- further refine commit log
- move assignment in a more sensible location
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following security issues:
- CVE-2021-40346: An integer overflow exists in HAProxy 2.0 through 2.5 in
the htx_add_header() can be exploited to perform an HTTP request smuggling
attack, allowing an attacker to bypass all configured http-request HAProxy
ACLs and possibly other ACLs.
For more details, see the advisory:
https://www.mail-archive.com/haproxy@formilux.org/msg41114.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Version 1.46.3 had a regression, which meant the file that would store
the filesystem image had to pre-exist, or mkfs.ext2 would fail to
generate the filesystem:
mkfs.ext4: No such file or directory while trying to determine
filesystem size
The regression was fixed upstream, and is now part of the 1.46.4
release, so bump to that release.
Fixes: #14196
Additionally, as noticed by Romain, the defaults settings for generating
"small" filesystems have changed: the inode size has been increased fom
128 to 256 bytes in 1.46.4 [0]. This causes the number of inodes to
diverge slightly from the requested number; instead of 8 more inodes,
there are now 8 fewer than requested.
Adapt our test accordingly.
[0] https://github.com/tytso/e2fsprogs/commit/a23b50cdb55cb826b8745cbc37429c93f7b60c66
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Reported-by: Kevin Tomary <kevin.tomary@hotmail.com>
Reported-by: Leon de Rooij <leon@exquisip.nl>
Reported-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The fix for CVE-2021-33196 can be bypassed by crafted inputs. As a result, the
NewReader and OpenReader functions in archive/zip can still cause a panic or an
unrecoverable fatal error when reading an archive that claims to contain a large
number of files, regardless of its actual size.
This is CVE-2021-39293.
https://golang.org/doc/devel/release.html#go1.16.minor
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Explicitly indicate the file encoding to UTF-8 for the DEVELOPERS
document. This prevents Unicode decoding errors when printing E-Mail
entries with Unicode characters on systems using an alternative default
encoding (e.g. 'CP1252').
This corrects the following observed error:
$ ./utils/get-developers outgoing/*
Traceback (most recent call last):
File "utils\get-developers", line 105, in <module>
__main__()
File "utils\get-developers", line 47, in __main__
devs = getdeveloperlib.parse_developers()
File "...\buildroot\utils\getdeveloperlib.py", line 239, in parse_developers
for line in f:
File "...\Python<ver>\lib\encodings\cp1252.py", line 23, in decode
return codecs.charmap_decode(input,self.errors,decoding_table)[0]
UnicodeDecodeError: 'charmap' codec can't decode byte 0x81 in position 6659: character maps to <undefined>
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump to version 2.9.3:
This is a small bugfix release focusing on exfat and dosfstools upstream
changes, along with a couple of test fixes.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When BR2_PACKAGE_IMX_GPU_VIV_OUTPUT_FB is selected, the native windowing
will be set to vivante frame buffer.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changes since v2019.08.23:
- Some X11 improvements (fullscreen support)
- New EGL driver debug messages
- Wayland improvements (xdg_shell, fullscreen support)
- KMS/DRM/GBM improvements (use drmGetDevices2())
- Use eglGetPlatformDisplay() if available
- New "nullws" native windowing system
- License hash changed due to copyright date update
Fixes:
http://autobuild.buildroot.net/results/a950e90d5f8405534566df5c7a8875c293cf8845
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failures with gcc 11:
/home/buildroot/autobuild/instance-3/output-1/host/lib/gcc/arm-buildroot-linux-gnueabihf/11.1.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: /home/buildroot/autobuild/instance-3/output-1/build/xvisor-0.3.0/build/drivers/drivers.o: in function `psmouse_extensions':
/home/buildroot/autobuild/instance-3/output-1/build/xvisor-0.3.0/drivers/input/mouse/psmouse-base.c:783: undefined reference to `lifebook_detect'
/home/buildroot/autobuild/instance-3/output-1/host/lib/gcc/arm-buildroot-linux-gnueabihf/11.1.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: /home/buildroot/autobuild/instance-3/output-1/build/xvisor-0.3.0/drivers/input/mouse/psmouse-base.c:783: undefined reference to `alps_detect'
/home/buildroot/autobuild/instance-3/output-1/host/lib/gcc/arm-buildroot-linux-gnueabihf/11.1.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: /home/buildroot/autobuild/instance-3/output-1/build/xvisor-0.3.0/drivers/input/mouse/psmouse-base.c:783: undefined reference to `ps2pp_init'
/home/buildroot/autobuild/instance-3/output-1/host/lib/gcc/arm-buildroot-linux-gnueabihf/11.1.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: /home/buildroot/autobuild/instance-3/output-1/build/xvisor-0.3.0/drivers/input/mouse/psmouse-base.c:783: undefined reference to `trackpoint_detect'
/home/buildroot/autobuild/instance-3/output-1/host/lib/gcc/arm-buildroot-linux-gnueabihf/11.1.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: /home/buildroot/autobuild/instance-3/output-1/build/xvisor-0.3.0/drivers/input/mouse/psmouse-base.c:783: undefined reference to `fsp_detect'
Fixes:
- http://autobuild.buildroot.org/results/69062b9c80567d135edd48890165e69881cf7295
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following uclibc build failure raised since at least bump to
version 0.11.0 in commit 0bc9c89612:
In file included from ../include/wlr/types/wlr_data_device.h:13,
from ../types/data_device/wlr_drag.c:7:
../include/wlr/types/wlr_seat.h:221:18: error: field 'last_event' has incomplete type
221 | struct timespec last_event;
| ^~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/3501ceb4290638b2f6d70aaa4d8ce74feec3a525
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Fix the following build failure on riscv32:
In file included from thread/qmutex_linux.cpp:45,
from thread/qmutex.cpp:804:
thread/qfutex_p.h: In function 'int QtLinuxFutex::_q_futex(int*, int, int, quintptr, int*, int)':
thread/qfutex_p.h:116:30: error: '__NR_futex' was not declared in this scope; did you mean '_q_futex'?
116 | int result = syscall(__NR_futex, addr, op | FUTEX_PRIVATE_FLAG, val, val2, addr2, val3);
| ^~~~~~~~~~
| _q_futex
Fixes:
- http://autobuild.buildroot.org/results/ffedfc000029072d5d724e98ab4551fe973658ce
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Fix the following build failure raised since bump of libglib2 to version
2.68.1 in commit c72524fb1b:
../gstreamer/gstreamermm/register.h: In function 'GType Gst::register_mm_type(const gchar*)':
/home/buildroot/autobuild/run/instance-2/output-1/host/bin/../arm-buildroot-linux-gnueabihf/sysroot/usr/include/glib-2.0/glib/gatomic.h:117:19: error: argument 2 of '__atomic_load' must not be a pointer to a 'volatile' type
117 | __atomic_load (gapg_temp_atomic, &gapg_temp_newval, __ATOMIC_SEQ_CST); \
| ~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/1c75cdcc183642fd4c15d56825848b83f2ad11a5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
The configure script fails to detect libpcap in static build because it
does not take into account the libnl dependency on link. As a result the
configure script silently disables mausezahn build even when
BR2_PACKAGE_NETSNIFF_NG_MAUSEZAHN is enabled. Add upstream patch to use
pkg-config for libpcap link flags.
Cc: Joris Lijssens <joris.lijssens@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- bpo-42278: Replaced usage of tempfile.mktemp() with TemporaryDirectory to
avoid a potential race condition.
- bpo-41180: Add auditing events to the marshal module, and stop raising
code.__init__ events for every unmarshalled code object. Directly
instantiated code objects will continue to raise an event, and audit event
handlers should inspect or collect the raw marshal data. This reduces a
significant performance overhead when loading from .pyc files.
- bpo-44394: Update the vendored copy of libexpat to 2.4.1 (from 2.2.8) to
get the fix for the CVE-2013-0340 “Billion Laughs” vulnerability. This
copy is most used on Windows and macOS.
- bpo-43124: Made the internal putcmd function in smtplib sanitize input for
presence of \r and \n characters to avoid (unlikely) command injection.
https://www.python.org/downloads/release/python-397/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Though several cross-compilation patches exist in buildroot's nginx
package dir they do not seem to address endianness.
The test program generated by the configure script compiles but fails
to run (as it is built for another architecture) but the script does
not distinguish between the failure to run the program and an
indication of certain endianness. As such the fallback of big-endian
is used. This setting then causes http2 headers (anything not in the
static dictionary) to come out as undecipherable trash on 64bit
targets (see ngx_http_v2_huff_encode_buf()).
This commit includes a patch to the configure script to allow a
`--force-endianness=big|little` flag as well as setting that flag in
buildroot's package makefile.
Signed-off-by: Nevo Hed <nhed+buildroot@starry.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Find libxcryt through pkg-config to avoid the following build failure:
/home/buildroot/autobuild/run/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/riscv64-buildroot-linux-musl/10.2.0/../../../../riscv64-buildroot-linux-musl/bin/ld: .libs/passverify.o: in function `.L30':
passverify.c:(.text+0x368): undefined reference to `crypt_checksalt'
Fixes:
- http://autobuild.buildroot.org/results/20b14e222b35c2d1269960075832b784ba81aa1a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- NodeJS passes NULL for addr and 0 for addrlen to
ares_parse_ptr_reply() on systems where malloc(0) returns NULL. This
would cause a crash.
- If ares_getaddrinfo() was terminated by an ares_destroy(), it would
cause a crash
- Crash in sortaddrinfo() if the list size equals 0 due to an unexpected
DNS response
- Expand number of escaped characters in DNS replies as per RFC1035 5.1
to prevent spoofing follow-up
- Perform validation on hostnames to prevent possible XSS due to
applications not performing valiation themselves
https://c-ares.haxx.se/changelog.html#1_17_2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some 3rd party vendor toolchains have multiple files which match
these glob patterns. In this case, the shell script failed.
Switching to use find and xargs solves the issue.
Signed-off-by: Jonah Petri <jonah@petri.us>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
rwmem is small tool to read & write device registers. Some of the
features include:
- support mmaped and i2c devices
- addressing with 8/16/32/64 bit addresses
- accessing 8/16/32/64 bit memory locations
- little and big endian addressess and accesses
- bitfields
- address ranges
- register description database
Python bindings are disabled for now.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The Qt OPC UA module implements a Qt API to interact with OPC UA on
top of a 3rd party OPC UA stack.
The default is open62541, which is bundled by qt5opcua in version 1.0,
so we dont need to provide/depend on br's own open62541 package.
Another dependency is mbedtls, but it's optional.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Vue Router is the official router for Vue.js.
Signed-off-by: Thomas Claveirole <thomas.claveirole@green-communications.fr>
[Arnout: use comment instead of submenu]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This tests build a bogus package that installs a binary built for the
host architecture into $(TARGET_DIR), which should cause a build
failure, at least as long as the host architecture isn't ARM.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
[yann.morin.1998@free.fr: drop uneeded subprocess import to fix flake8]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some tests will need to grep through the build log to verify that some
features are working are expected. In order to allow them to open the
build log, we provide a new function called log_file_path(), which
returns the path to the log file if available.
We also use this function in open_log_file().
Note that open_log_file() cannot be used directly to grep through the
log file at the end of a build: because it opens in "a+" mode, it
greps starting from the end of the file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since commit 39d334faa5 (package/pkg-qmake: add <pkg>_SYNC_QT_HEADERS
support), the qmake-package infra recognises said variable but the
manual has the wrong variable name, which is missing the "_QT" part.
We fix that by amending the manual to document the proper variable name.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
QT5_QT_CONF_FIXUP tweaks files for per-package directory build.
This is typically the kind of operation expected to be in
post-prepare hook.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When using top level parallel build, independent qt5 packages may be
built in parallel. Because of their staging dirs being hardlinked, they
all use the same qt.conf file to manipulate during configure, while
another qt5 package might already use it. This leads to weird build failures
because the folders qmake is using are diverted in erratic ways.
Fix this by actually recreating a non-shared qt.conf file for every package.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This release includes the following changes:
- New features
- New 'sessionResume' service-level option to allow or disallow session resumption
- Added support for the new SSL_set_options() values.
- Download fresh ca-certs.pem for each new release.
- Bugfixes
- Fixed 'redirect' with 'protocol'. This combination is not supported by 'smtp', 'pop3' and 'imap' protocols.
- Enforced minimum WIN32 log window size.
- Fixed support for password-protected private keys with OpenSSL 3.0 (thx to Dmitry Belyavskiy).
- Added missing TLS options supported in OpenSSL 1.1.1k.
Signed-off-by: Pierre-Jean Texier <texier.pj2@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This release introduces meson build system support.
As meson files are only available in git, switch the location to
https://gitlab.freedesktop.org.
Add support for bash-completion.
Add an upstream patch fixing the compilation without gobject-intorspection.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Use BR2_PACKAGE_MESA3D_GBM instead of BR2_PACKAGE_MESA3D_OPENGL_EGL as
GBM can also be provided by a DRI driver
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The gitlab-ci support in test-pkg allows to parallelize the test-pkg
work into several gitlab jobs. It's much faster than local serialized
testing.
To trigger this, a developer will have to add, in the latest commit of
their branch, a token on its own line, followed by a configuration
fragment, e.g.:
test-pkg config:
SOME_OPTION=y
# OTHER_OPTION is not set
SOME_VARIABLE="some value"
This configuration fragment is used as input to test-pkg.
To be able to generate one job per test to run, we need the list of
tests in the parent pipeline, and the individual .config files (one per
test) in the child pipeline. We use the newly-introduced --prepare-only
mode to test-pkg, and collect all the generated .config files as
artefacts; those are inherited in the child pipeline via the
"needs::pipeline" and "needs::job" directives. This is a bit tricky,
and is best described by the Gitlab-CI documentation [0].
We also list those .config files to generate the actual list of jobs to
run in the child pipeline.
Notes:
- if the user provides an empty fragment, this is considered an error:
indeed, without a fragment (and the package name), there is no way
to know what to test;
- if that fragment yields an empty list of tests, then there is
nothing to test either, so that is also considered an error.
[0] https://docs.gitlab.com/ee/ci/yaml/README.html#artifact-downloads-to-child-pipelines
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr:
- split the change to test-pkg to its own patch
- generate the actual yml snippet in support/scripts/generate-gitlab-ci-yml,
listing the .config files created by test-pkg
- some code-style-candies...
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, running test-pkg is only done locally on the developers
machine.
In a follow up commit, we'll add the possibility to run test-pkg in a
gitlab-ci pipeline and, to speed things up, with one job per buildable
configuration.
As such, we will need to make sure that test-pkg only prepares the
configurations, and that it does not build them.
Add such a mode, with a new option, --prepare-only
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update STM32F469-disco configuration files to operate with new kernel.
Result of make tinyconfig was taken as a starting point to fit kernel
into flash memory.
Current setup kernel + rootfs fits in 1.6MB on-chip flash memory
Fixes:
- Move kernel to new flash bank due to growth of dtb size
- Fix kernel start address in bootloader
- Remove outdated path which doesn't affect normal operation mode
For better binary size optimization gcc LTO is turned on.
Signed-off-by: Yauheni Saldatsenka <eugentoo@gmail.com>
[Arnout:
- squash 3 patches into 1;
- remove unused dts file;
- move linux/linux.config to linux-xip.config;
- add a sentence to readme to say SD card is not needed.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixing _sysconfigdata*.{py,pyc} was previously done by python package
infrastructure. Some packages use python stuff without using python
package infrastructure.
These packages perform overwrites and need the specific python fixup
to fix them.
In order to be sure to fix all of these packages, the python fixup
is moved to the generic package infrastructure and applied to all
packages.
This follows the same principle as for the .la libtool files fixup.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
For per-package directories, we fixup the _sysconfigdata*.py files, so
that they get proper path pointing to the current package's direcotry
structure.
However, the corresponding, pre-compiled blobs _sysconfigdata*.pyc were
left around, and thus are inconsistent with their source. They might
also be regenerated when a package would install a python module; this
regeneration would trigger the soon-to-be-introduced overwrite
detection.
This commit simply removes _sysconfigdata*.pyc files; they will anyway
be regenerated by the PYTHON{,3}_CREATE_PYC_FILES target finalize hooks.
This is an efficient way to guarantee the consistency between the source
and precompiled versions, and to not trigger the overwrite detection.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
[yann.morin.1998@free.frs: reword the commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Find used by PKG_PYTHON_FIXUP_SYSCONFIGDATA can fail if directories
are not present. This failure is silently ignored because find is
on the LHS of a pipe.
This commit fixes the find failure. HOST_DIR is used as the starting
point and the search is filtered on the expected directories.
This commit also adds -print0 and the $(Q) verbosity flag as minor
changes.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
[yann.morin.1998@free.fr:
- split long line with the two -path options
- move "| xargs ..." onto its own line
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
With BR2_REPRODUCIBLE, our 'fakedate' wrapper script will end up in
host/bin/date. Currently, it iterates over all the 'date' found in PATH,
until it finds one that is not the script itself, in an attempt to avoid
infinite recursion by calling itself again and again.
This heuristic works OK in Buildroot, because host/bin/ is first in the
PATH, and so that means the first entry in the PATH is skipped.
However, this is going to fail as soon as our wrapper is not the first
in the PATH. Indeed, in that situation, the current heuristic will stop
on the first 'date' in the PATH, as it is not the script itself, and
since our script was executed, that probably means the first 'date' was
itself a wrapper that ended up calling us. So, calling it again will
eventually trickle to calling us again, and thus creating the loop our
heuristic was made to avoid.
This situation currently does not occur in Buildroot, because host/bin/
is first, *and* we have no package that provide their own 'date' wrapper
during their build steps.
But when we generate an SDK with BR2_REPRODUCIBLE, then our wrapper
script will be in sdk/bin/, and there is no longer any guarantee this
comes first in the PATH, thus opening the possibility that another
buildsystem based on our SDK, but which has its own 'date' wrapper, will
trigger this infinite recursion.
We fix that by iterating, in reverse order, over all the 'date' we can
find in PATH, and when we find ourselves, then we know the one we found
in the iteration just before is the one that we should call.
'which -a' is old enough that we can expect it to be always available;
it has been present at least since Debian Squeeze, released 2011.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix build of xen with 64 bites time_t:
/tmp/instance-0/output-1/build/xen-4.14.2/tools/qemu-xen/hw/input/virtio-input-host.c: In function 'virtio_input_host_handle_status':
/tmp/instance-0/output-1/build/xen-4.14.2/tools/qemu-xen/hw/input/virtio-input-host.c:198:28: error: 'struct input_event' has no member named 'time'
198 | if (gettimeofday(&evdev.time, NULL)) {
| ^
Fixes:
- http://autobuild.buildroot.org/results/136ce42f44bf48d3db4eda7b1548bf7ac1b97d51
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This version bump is needed to pass the ATF test with
hardening option enabled (-fstack-protector-strong)
With the version v2.2, ATF fail due to undefined references:
./build/juno/release/bl2u/arm_tzc400.o: In function `arm_tzc400_setup':
arm_tzc400.c:(.text.arm_tzc400_setup+0x10): undefined reference to `__stack_chk_guard'
arm_tzc400.c:(.text.arm_tzc400_setup+0x18): undefined reference to `__stack_chk_guard'
arm_tzc400.c:(.text.arm_tzc400_setup+0xb8): undefined reference to `__stack_chk_guard'
arm_tzc400.c:(.text.arm_tzc400_setup+0xcc): undefined reference to `__stack_chk_fail'
Since commit ccac9a5bbb, Buildroot no
longer forces ENABLE_STACK_PROTECTOR. However, we rely on the ATF build
system to handle it correctly, and this wasn't the case in v2.2.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/1524842591
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When BR2_REPRODUCIBLE is set and host-coreutils needs to be built, the
fakedate script installed to 'host/bin/date' will be overwritten by
host-coreutils.
Besides, we do not need our host-coreutils for 'date' at all; we really
rely on the host system to provide it.
Unconditionally disable installing the 'date' binary in host-coreutils.
Note that we explicitly request only ln and realpath to be installed,
but the coreutils buildsystem does not strictly obey to that, as was
already noticed in 885e6fdb8a (package/coreutils: introduce a host
variant), which added that comment above HOST_COREUTILS_CONF_OPTS:
# Explicitly install ln and realpath, which we *are* insterested in.
# A lot of other programs still get installed, however, but disabling
# them does not gain much at build time, and is a loooong list that is
# difficult to maintain...
So, we also update that comment to explain why we still anyway disable
installation of 'date'.
Signed-off-by: Conrad Ratschan <conrad.ratschan@collins.com>
[yann.morin.1998@free.fr:
- unconditionally disable installing date
- extend comment and commit log to explain why we need
--enable-no-install-program=date despite the existing
--enable-install-program=ln,realpath
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Sam Voss <sam.voss@collins.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr:
- introduce BUSYBOX_INSTALL_TELNET_SERVICE
- move _INSTALL_INIT_SYSTEMD alphabetically between openrc and sysv
- drop the comment about Type=simple (Arnout)
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since version 2.1.3 ubihealthd can be enabled without of ubifs-utils.
This also fixes usability of enabling BR2_PACKAGE_MTD_UBIHEALTHD.
BR2_PACKAGE_MTD_UBIFS_UTILS is a blind option. The only way to enable it
is to enable BR2_PACKAGE_MTD_MKFSUBIFS that selects it. ubihealthd
dependency on BR2_PACKAGE_MTD_UBIFS_UTILS makes enabling it unintuitive.
Cc: Markus Mayer <mmayer@broadcom.com>
Cc: Matt Weber <matthew.weber@collins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
resync the version with glibc package.
Dropped 2 patches (fixes backported from previous releases),
rebased 2 which are kept (only line numbers changed).
Suggested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
[Arnout: resolve conflicts]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
the nabble.com link is dead and lore has a good search.
So use lore for the search form.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure without /usr/bin/msgfmt raised since the
addition of ushare in commit 74097fd659:
make[3]: Entering directory `/home/buildroot/autobuild/run/instance-3/output-1/build/ushare-2.1/po'
/usr/bin/msgfmt -c --statistics -o fr.gmo fr.po
make[3]: /usr/bin/msgfmt: Command not found
To fix this build failure, set GMSGFMT to $(HOST_DIR)/bin/msgfmt and
don't build po files if NLS is disabled
Fixes:
- http://autobuild.buildroot.org/results/9f6b5b8f38386135bacd2d8f6e97c1fea77bbe69
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The beaglev kernel is based on the 5.13 branch, update
the expected linux-headers version to 5.13.
This has been wrong ever since the bump of the kernel version in commit
9a1bd7cc1c: the headers were bumped to
5.12 instead of 5.13.
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/1525740895
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Previously, alsa-plugins would not work if alsa-utils was installed
after it. This happened because:
1. alsa-plugins copies some files $(TARGET_DIR)/usr/share/alsa/alsa.conf.d
2. alsa-utils removes these files during installation ( rm -rf $(TARGET_DIR)/usr/share/alsa/;)
The `rm -rf` command was originally added as part of the fix for
https://bugs.buildroot.org/show_bug.cgi?id=1573 11 years ago.
The intention might have been to allow for unconfiguring some options
and then rebuilding alsa-utils. However, this is a scenario that does
not work anyway.
The simplest fix for the `alsa-plugins` compatibility issue appears to
be to remove the `rm -rf` command.
Signed-off-by: Gleb Mazovetskiy <glex.spb@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Maxime has not been contributing to Buildroot for several years, so it
doesn't make sense to keep him in the DEVELOPERS file and make us
think that those packages are being maintained and to Cc: him on
patches affecting those packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some 3rd party vendor toolchains have multiple files which match
these glob patterns. In this case, the shell script failed.
Switching to use find and xargs solves the issue.
Signed-off-by: Jonah Petri <jonah@petri.us>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add libxcrypt optional dependency and fix the following build failure
with libxcrypt and uclibc-ng raised since the addition of libxcrypt in
commit 464bbe26ff:
/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabihf/9.3.0/../../../../arm-buildroot-linux-uclibcgnueabihf/bin/ld: unix_chkpwd-passverify.o: in function `verify_pwd_hash':
passverify.c:(.text+0xab4): undefined reference to `crypt_checksalt'
Fixes:
- http://autobuild.buildroot.org/results/65d68b7c9c7de1c7cb0f941ff9982f93a49a56f8
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
resync the version with glibc package.
Remove upstream patches.
Rebase remaining patches for glibc 2.33.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The tests.package.test_docker_compose.TestDockerCompose is broken
since the python-idna version bump to 3.0 because python-requests needs
python-idna < 3.0.
# docker-compose up -d
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 583, in _build_master
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 900, in require
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 791, in resolve
pkg_resources.ContextualVersionConflict: (idna 3.2 (/usr/lib/python3.9/site-packages), Requirement.parse('idna<3,>=2.5'), {'requests'})
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/bin/docker-compose", line 6, in <module>
from pkg_resources import load_entry_point
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 3252, in <module>
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 3235, in _call_aside
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 3264, in _initialize_master_working_set
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 585, in _build_master
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 598, in _build_from_requirements
File "/usr/lib/python3.9/site-packages/pkg_resources/__init__.py", line 786, in resolve
pkg_resources.DistributionNotFound: The 'idna<3,>=2.5' distribution was not found and is required by requests
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/1522848327
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
gcc 10.x is now used by default but the kernel 4.19 used by
test_docker_compose doesn't build with it.
Bump the kernel to 4.19.204 release that contains a lot of
fixes for newer gcc.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In versions > 0.21, the CMake script doesn't auto-enable features
according to what it detects in the environment; options have to be
explicitely enabled. Update the libiio.mk script accordingly.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Upstream commit [1] introduced an invocation of objcopy to generat
loader.txt. However, objcopy, if not provided with an output file, will
overwrite the input file. This is usually harmless because it will be
identical, but the timestamp is updated. This may cause 'empty' to be
newer than 'loader.txt', which causes 'loader.txt' and its dependencies
to be rebuilt during 'make install'
We provide a different set of parameters during 'make install'. In
particular, we no longer pass in HOST_CONFIGURE_OPTS, so we no longer
set LDFLAGS. Thus, there is no -Wl,rpath option that is passed in, which
causes the resulting binaries to have an incorrect RPATH.
Fix this by adding /dev/null as the output file in the objcopy
invocation.
Patch was sent upstream, but there's no mailing list, just a single
person.
Fixes: http://autobuild.buildroot.net/results/600/600aff5b839b48db80751cace5fa9670b7a3d698
(hopefully)
[1] https://git.kernel.org/pub/scm/libs/libcap/libcap.git/commit/?id=efd293947f940180eedd8d0915b124f4aedccc08
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Upstream commit [1] introduced an invocation of objcopy to generat
loader.txt. However, objcopy, if not provided with an output file, will
overwrite the input file. This is usually harmless because it will be
identical, but the timestamp is updated. This may cause 'empty' to be
newer than 'loader.txt', which causes 'loader.txt' and its dependencies
to be rebuilt during 'make install'
We provide a different set of parameters during 'make install'. In
particular, we no longer pass in HOST_CONFIGURE_OPTS, so we no longer
set LDFLAGS. Thus, there is no -Wl,rpath option that is passed in, which
causes the resulting binaries to have an incorrect RPATH.
Fix this by adding /dev/null as the output file in the objcopy
invocation.
Patch was sent upstream, but there's no mailing list, just a single
person.
Fixes: http://autobuild.buildroot.net/results/600/600aff5b839b48db80751cace5fa9670b7a3d698
(hopefully)
[1] https://git.kernel.org/pub/scm/libs/libcap/libcap.git/commit/?id=efd293947f940180eedd8d0915b124f4aedccc08
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The python2 support has been removed since the python-idna bump to version 3.2 [1]
[1] 0c7e30b43a
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure on riscv32:
../src/util/futex.h: In function 'sys_futex':
../src/util/futex.h:39:19: error: 'SYS_futex' undeclared (first use in this function); did you mean 'sys_futex'?
39 | return syscall(SYS_futex, addr1, op, val1, timeout, addr2, val3);
| ^~~~~~~~~
| sys_futex
Fixes:
- http://autobuild.buildroot.org/results/692700a5f967760a0b8cd358b1712f1d5a7b681e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We generally prefer using make loops instead of shell loops. They
bring automatic error handling, as they abort the loop when there is
an error, without the need for "|| exit 1".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The IMX_GPU_VIV_FIXUP_PKGCONFIG fixup is defined conditionally
depending on the value of IMX_GPU_VIV_LIB_TARGET, which means that
obviously only one of the definitions is possible. Make this clear by
using a ifeq ... else ifeq ... else ifeq ... endif logic.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We manually install pkg-config files from
$(@D)/gpu-core/usr/lib/pkgconfig to the STAGING_DIR right after
copying the entire $(@D)/gpu-core/usr/* files to STAGING_DIR. This
makes the manual copying of pkg-config files pretty useless.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The fixup of the pkg-config files modifies files in the build
directory (@D) but is done in the staging installation step, which
doesn't make much sense, especially since the build step already has
some fixup logic. So we move the fixup logic of the pkg-config files
into the build step.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The current restorecond upstream init script is no good fit for the
user space generated by buildroot, so we provide our own one.
Signed-off-by: José Pekkarinen <jose.pekkarinen@unikie.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix added by commit c20d31baf4 is
incomplete as polkit.loc must also be added to
$(HOST_DIR)/share/gettext/its
Additionally, the destination path for "$(INSTALL) -D" must be a
fully-qualified filename, not just the destination directory.
Fixes:
- http://autobuild.buildroot.org/results/170e4802b7b4e8e7dafa95ade549e8fd05e43bfd
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: dest must be a filename, not a directory]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
GNU cpio through 2.13 allows attackers to execute arbitrary code via a
crafted pattern file, because of a dstring.c ds_fgetstr integer overflow
that triggers an out-of-bounds heap write. NOTE: it is unclear whether
there are common cases where the pattern file, associated with the -E
option, is untrusted data.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop libmcrypt which is a cryptographic package that is not maintained
anymore. Here is an extract of https://en.wikipedia.org/wiki/Mcrypt:
"The last update to libmcrypt was in 2007, despite years of unmerged
patches. These facts have led security experts to declare mcrypt
abandonware and discourage its use in new development.".
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop mcrypt which is a cryptographic package that is not maintained
anymore. Here is an extract of https://en.wikipedia.org/wiki/Mcrypt:
"The last update to libmcrypt was in 2007, despite years of unmerged
patches. These facts have led security experts to declare mcrypt
abandonware and discourage its use in new development."
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
d1fc0690ad (package/libvirt: fix dependencies on kernel headers)
forgot to update the conditions for the comment after the last-minute
changes by Yann.
Fix that.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In ccfc90e101 (package/libvirt: new package), last-minute changes
missed the depenecny on kernel headers; headers >= 3.12 are required for
all architectures, but AArch64, which requires 4.11 for HWCAP_CPUID:
../src/cpu/cpu_arm.c: In function 'virCPUarmCpuDataFromRegs':
../src/cpu/cpu_arm.c:562:20: error: 'HWCAP_CPUID' undeclared (first use in this function); did you mean 'HWCAP_PMULL'?
if (!(hwcaps & HWCAP_CPUID)) {
^~~~~~~~~~~
HWCAP_PMULL
Fixes:
- http://autobuild.buildroot.org/results/85bf7b4dad73a748bf439e63874eb64d9a53088f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
- move AArch64 4.11 req. from _ARCH_SUPPORTS to BR2_PACKAGE_LIBVIRT
- add missing dependency on headers 3.12 for the rest
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Similarly to Uboot, this patch adds the ability to copy in and build
out-of-source device tree sources during an ATF build.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Strip xbr contracts which are used only for the xbr feature which is
entirely unsupported by buildroot.
Add patch to fix some xbr assets getting accidentially included.
Enable the optimized nvx cffi extension module when available.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
MPV is not only an application, but also a library, which should be avaliable in staging.
Signed-off-by: Zeno Endemann <zeno.endemann@mailbox.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This folder includes the fixfiles script that is used
by selinux autorelabel feature. Currently it installs
it under /usr/sbin.
Signed-off-by: José Pekkarinen <jose.pekkarinen@unikie.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The heirloom-mailx package exhibits gcc bug 101916 when built for the
SH4 architecture with optimization enabled, which causes a build failure.
As done for other packages in Buildroot work around this gcc bug by
setting optimization to -O0 if BR2_TOOLCHAIN_HAS_GCC_BUG_101916=y.
Also introduce HEIRLOOM_MAILX_CFLAGS as done for other packages and move
the already present -fPIC CFLAG to it.
Fixes:
http://autobuild.buildroot.net/results/911/911f5c024834741754102ff1bbb05c4a64c54a0b/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Build of gdb on riscv without host-gdb is broken since commit
4ecd247ead because BR2_GDB_VERSION_10 is
never defined if BR2_PACKAGE_HOST_GDB is not selected resulting in the
following build failure:
/bin/bash: line 0: cd: /tmp/instance-0/output-1/build/gdb-10.1/gdb/gdbserver: No such file or directory
So add a BR2_PACKAGE_GDB_TOPLEVEL hidden option as suggested by Thomas
Petazzoni.
Fixes:
- http://autobuild.buildroot.org/results/ce47d616ee79d5f735779570ebc3b4a9c0f64c6a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This reverts commit 46b8fb7500 indeed if
libressl is selected as the openssl provider, the BR2_PACKAGE_OPENSSL
conditition will always be used and the BR2_PACKAGE_LIBRESSL condition
will never be triggered. Moreover, libressl provides a pkg-config file.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues:
- CVE-2021-39240: An issue was discovered in HAProxy 2.2 before 2.2.16, 2.3
before 2.3.13, and 2.4 before 2.4.3. It does not ensure that the scheme
and path portions of a URI have the expected characters. For example, the
authority field (as observed on a target HTTP/2 server) might differ from
what the routing rules were intended to achieve.
- CVE-2021-39241: An issue was discovered in HAProxy 2.0 before 2.0.24, 2.2
before 2.2.16, 2.3 before 2.3.13, and 2.4 before 2.4.3. An HTTP method
name may contain a space followed by the name of a protected resource. It
is possible that a server would interpret this as a request for that
protected resource, such as in the "GET /admin? HTTP/1.1 /static/images
HTTP/1.1" example.
- CVE-2021-39242: An issue was discovered in HAProxy 2.2 before 2.2.16, 2.3
before 2.3.13, and 2.4 before 2.4.3. It can lead to a situation with an
attacker-controlled HTTP Host header, because a mismatch between Host and
authority is mishandled.
For more details, see the advisory:
https://www.mail-archive.com/haproxy@formilux.org/msg41041.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package has had build failures for a very long time, and these
issues have not been fixed, and it is now the number 1 build failure
reason in our autobuilders. It is time to acknowledge that the package
needs to be removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure raised since the addition of the package
in commit ccfc90e101:
/tmp/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/i686-buildroot-linux-uclibc/9.3.0/../../../../i686-buildroot-linux-uclibc/bin/ld: src/util/libvirt_util.a(viralloc.c.o): in function `virInsertElementsN':
viralloc.c:(.text+0x167): undefined reference to `libintl_dgettext'
Fixes:
- http://autobuild.buildroot.net/results/2349c55a4a42f08ca52700c60cda3065b0c4bd88
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to AT91Bootstrap 4.0.0 version.
This package is now released under MIT license, and a license file was
added.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since I've dealt and deal with toolchain bugs and their work-around
very often add myself to toolchain topic(toolchain/) as well as
package/binutils and package/gcc.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The language detection is falling back to the host system
Fortran compiler. An example of this is in RHEL7.9
(gcc4.8.5 20150623 (Red Hat 4.8.5-44)).
This patch bypasses detection and points to the location
where the compiler would be installed (if present). In the
cases where it doesn't exist, the detection falls through
and leaves Fortran disabled.
Fixes:
http://autobuild.buildroot.net/results/8354da225d1e5e337aa7ea62a7e6524fb5f1135f/
Signed-off-by: Matthew Weber <matthew.weber@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Also adds patch to make the jemalloc feature optional on musl, due to
toolchains not being supported by upstream project.
Signed-off-by: Sam Voss <sam.voss@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This includes the following changes:
7.15
- Kernel part changes
- netfilter: ipset: Fix maximal range check in hash_ipportnet4_uadt() (Nathan Chancellor)
7.14
- Userspace changes
- Add missing function to libipset.map and bump library version (reported by Jan Engelhardt)
- Kernel part changes
- 64bit division isn't allowed on 32bit, replace it with shift
7.13
- Userspace changes
- When parsing protocols by number, do not check it in /etc/protocols.
- Add missing hunk to patch "Allow specifying protocols by number"
- Kernel part changes
- Limit the maximal range of consecutive elements to add/delete fix
7.12
- Userspace changes
- Allow specifying protocols by number (Haw Loeung)
- Fix example in ipset.8 manpage discovered by Pablo Neira Ayuso.
- tests: add tests ipset to nftables (Pablo Neira Ayuso)
- add ipset to nftables translation infrastructure (Pablo Neira Ayuso)
- lib: Detach restore routine from parser (Pablo Neira Ayuso)
- lib: split parser from command execution (Pablo Neira Ayuso)
- Fix patch "Parse port before trying by service name"
- Kernel part changes
- Limit the maximal range of consecutive elements to add/delete (reported by Brad Spengler)
- Backport "netfilter: use nfnetlink_unicast()"
- Backport "netfilter: nfnetlink: consolidate callback type"
- Backport "netfilter: nfnetlink: add struct nfnl_info and pass it to callbacks"
- Backport "netfilter: add helper function to set up the nfnetlink header and use it"
Signed-off-by: Pierre-Jean Texier <texier.pj2@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The latest Go release, version 1.17, arrives six months after Go 1.16.
Most of its changes are in the implementation of the toolchain,
runtime, and libraries.
https://golang.org/doc/go1.17
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop autoreconf; tarball now ships the configure script.
Rename license files and update hashes. Added SPDX markers. No license
change.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For MIPS64 architecture variants supported by Rust, we need to exclude
MIPS64R6, but due to a copy/paste mistake in commit
d69d40c029 ("package/rustc: add support
for Tier 1 and Tier 2 platform"), we used BR2_MIPS_CPU_MIPS32R6 for
both MIPS 32-bit and MIPS 64-bit configurations, while
BR2_MIPS_CPU_MIPS64R6 should be used on MIPS 64-bit.
Fixes:
http://autobuild.buildroot.net/8bab232eb98b164df300581ae019254bde7c8ca3/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update Cage to version 0.1.4, which is a bug fix release that
supports using wlroots 0.14.x.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to version 0.14.1, and adapt to upstream changes:
- seatd/libseat is now used unconditionally, the logind/elogind build
options have been removed (which can be used through seatd, no
functionality is lost).
- Now wlroots includes a software-based renderer (which uses pixman),
and the OpenGL ES one is optional. For now it is left always enabled
(as it was before) but this could be changed in the future.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to version 1.21, which is required by newer wlroots releases.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We can drop all the patches as they have been sorted out in upstream.
The wrapped fmt was dropped, so drop the corresponding option.
The option to use a system pybind11 was named differently upstream, as a
feature rather as a boolean. Adapt accordingly.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
[yann.morin.1998@free.fr: explain dropped/changed options]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, for a static-only build, we pass -Dstatic-libc=true. The
reason for that was not recorded when the package was converted to
meson.
The -Dstatic-libc=true option, despite its name, is not about linking
statically against libc, but against libgcc and libstdc++.
In Buildroot, we forcibly pass -static when calling the compiler and
linker, so everything is already linked statically.
For a shared build, -Dstatic-libc=false has no effect at all.
Drop this option altogether, as it is not needed, and is confusing.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
[yann.morin.1998@free.fr: expand commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When the config fragment provided by the user is not usable with a
specific toolchain configuration, the resulting .config file was kept
around.
In a follow up commit, we'll need to know, from outside test-pkg, if a
specific configuration was indeed usable or not.
So, unless if the user actually requested to keep the build directories,
remove the .config file when it contains a configration that would be
skipped.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In a followup commit, the make command used to log and display the last
lines on error will be used in another job.
Factorize it by introducing .run_make template.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
If the libzstd DSO is available, then link the tool
against it.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Create libzstd.pc in the build step instead of triggering a
lazy build during installation when it is missing.
Move PREFIX=/usr to ZSTD_OPTS. It is needed for building libzstd.pc
during the build step; for consistency, make sure it's available in all
steps.
Attach '-release' to the targets, since the default is to
build lib-release and zstd-release. Its only effect is to clear
DEBUGFLAGS (which are just warning flags).
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[Arnout: add check-package disable]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
"This release brings in some missing MQTT v5 features, support for
websocket headers and proxies, ALPN protocol lists, adds the builder
pattern for options, and fixes a number of bugs in both the C++ library
and the underlying C lib."
https://github.com/eclipse/paho.mqtt.cpp/releases/tag/v1.2.0
This also makes the patch obsolete, since these changes have been merged upstream.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* drop CMakeLists.txt patch applied upstream.
* Update patch for wrap_memcpy.cc to match changed target file.
* update patch numbering.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for xserver_xorg-server is added by the services/xserver module
in the SELinux refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Peter Korsgaard