Update for 2018.08.2

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
package/live555: security bump to version 2018.10.17
2018-10-25 14:40:48 +02:00 · 2018-10-24 17:58:57 +02:00 · 2018-10-24 17:58:50 +02:00 · 2018-10-24 17:58:44 +02:00 · 2018-10-24 17:54:58 +02:00 · 2018-10-24 17:53:54 +02:00
1992 changed files with 12982 additions and 27507 deletions
@@ -43,7 +43,8 @@ check-flake8:

 check-package:
    script:
-        - make check-package
+        - find . -type f \( -name '*.mk' -o -name '*.hash' -o -name 'Config.*' \)
+            -exec ./utils/check-package {} +

 .defconfig: &defconfig
    # Running the defconfigs for every push is too much, so limit to
@@ -62,11 +63,6 @@ check-package:
            - output/build/packages-file-list.txt

 .runtime_test: &runtime_test
-    # Running the runtime tests for every push is too much, so limit to
-    # explicit triggers through the API.
-    only:
-        - triggers
-        - tags
    # Keep build directories so the rootfs can be an artifact of the job. The
    # runner will clean up those files for us.
    # Multiply every emulator timeout by 10 to avoid sporadic failures in
@@ -83,7 +79,6 @@ acmesystems_aria_g25_128mb_defconfig: *defconfig
 acmesystems_aria_g25_256mb_defconfig: *defconfig
 acmesystems_arietta_g25_128mb_defconfig: *defconfig
 acmesystems_arietta_g25_256mb_defconfig: *defconfig
-amarula_a64_relic_defconfig: *defconfig
 amarula_vyasa_rk3288_defconfig: *defconfig
 arcturus_ucls1012a_defconfig: *defconfig
 arcturus_ucp1020_defconfig: *defconfig
@@ -115,7 +110,6 @@ atmel_sama5d4_xplained_mmc_defconfig: *defconfig
 atmel_sama5d4_xplained_mmc_dev_defconfig: *defconfig
 bananapi_m1_defconfig: *defconfig
 bananapi_m2_plus_defconfig: *defconfig
-bananapi_m2_ultra_defconfig: *defconfig
 bananapi_m64_defconfig: *defconfig
 bananapro_defconfig: *defconfig
 beagleboardx15_defconfig: *defconfig
@@ -174,12 +168,11 @@ nitrogen6x_defconfig: *defconfig
 nitrogen7_defconfig: *defconfig
 nitrogen8m_defconfig: *defconfig
 odroidc2_defconfig: *defconfig
-odroidxu4_defconfig: *defconfig
 olimex_a10_olinuxino_lime_defconfig: *defconfig
 olimex_a13_olinuxino_defconfig: *defconfig
 olimex_a20_olinuxino_lime2_defconfig: *defconfig
 olimex_a20_olinuxino_lime_defconfig: *defconfig
-olimex_a20_olinuxino_lime_legacy_defconfig: *defconfig
+olimex_a20_olinuxino_lime_mali_defconfig: *defconfig
 olimex_a20_olinuxino_micro_defconfig: *defconfig
 olimex_a64_olinuxino_defconfig: *defconfig
 olimex_imx233_olinuxino_defconfig: *defconfig
@@ -223,7 +216,6 @@ qemu_ppc64le_pseries_defconfig: *defconfig
 qemu_ppc_g3beige_defconfig: *defconfig
 qemu_ppc_mpc8544ds_defconfig: *defconfig
 qemu_ppc_virtex_ml507_defconfig: *defconfig
-qemu_riscv64_virt_defconfig: *defconfig
 qemu_sh4_r2d_defconfig: *defconfig
 qemu_sh4eb_r2d_defconfig: *defconfig
 qemu_sparc64_sun4u_defconfig: *defconfig
@@ -239,7 +231,6 @@ raspberrypi3_64_defconfig: *defconfig
 raspberrypi3_defconfig: *defconfig
 raspberrypi3_qt5we_defconfig: *defconfig
 raspberrypi_defconfig: *defconfig
-riotboard_defconfig: *defconfig
 roseapplepi_defconfig: *defconfig
 s6lx9_microboard_defconfig: *defconfig
 sheevaplug_defconfig: *defconfig
@@ -272,12 +263,6 @@ tests.boot.test_atf.TestATFAllwinner: *runtime_test
 tests.boot.test_atf.TestATFMarvell: *runtime_test
 tests.boot.test_atf.TestATFVexpress: *runtime_test
 tests.core.test_file_capabilities.TestFileCapabilities: *runtime_test
-tests.core.test_hardening.TestFortifyConserv: *runtime_test
-tests.core.test_hardening.TestFortifyNone: *runtime_test
-tests.core.test_hardening.TestRelro: *runtime_test
-tests.core.test_hardening.TestRelroPartial: *runtime_test
-tests.core.test_hardening.TestSspNone: *runtime_test
-tests.core.test_hardening.TestSspStrong: *runtime_test
 tests.core.test_post_scripts.TestPostScripts: *runtime_test
 tests.core.test_rootfs_overlay.TestRootfsOverlay: *runtime_test
 tests.core.test_timezone.TestGlibcAllTimezone: *runtime_test
@@ -287,7 +272,6 @@ tests.fs.test_ext.TestExt2: *runtime_test
 tests.fs.test_ext.TestExt2r1: *runtime_test
 tests.fs.test_ext.TestExt3: *runtime_test
 tests.fs.test_ext.TestExt4: *runtime_test
-tests.fs.test_f2fs.TestF2FS: *runtime_test
 tests.fs.test_iso9660.TestIso9660Grub2External: *runtime_test
 tests.fs.test_iso9660.TestIso9660Grub2ExternalCompress: *runtime_test
 tests.fs.test_iso9660.TestIso9660Grub2Internal: *runtime_test
@@ -314,18 +298,8 @@ tests.package.test_ipython.TestIPythonPy2: *runtime_test
 tests.package.test_ipython.TestIPythonPy3: *runtime_test
 tests.package.test_python.TestPython2: *runtime_test
 tests.package.test_python.TestPython3: *runtime_test
-tests.package.test_python_autobahn.TestPythonPy2Autobahn: *runtime_test
-tests.package.test_python_autobahn.TestPythonPy3Autobahn: *runtime_test
 tests.package.test_python_cryptography.TestPythonPy2Cryptography: *runtime_test
 tests.package.test_python_cryptography.TestPythonPy3Cryptography: *runtime_test
-tests.package.test_python_incremental.TestPythonPy2Incremental: *runtime_test
-tests.package.test_python_incremental.TestPythonPy3Incremental: *runtime_test
-tests.package.test_python_twisted.TestPythonPy2Twisted: *runtime_test
-tests.package.test_python_twisted.TestPythonPy3Twisted: *runtime_test
-tests.package.test_python_txaio.TestPythonPy2Txaio: *runtime_test
-tests.package.test_python_txaio.TestPythonPy3Txaio: *runtime_test
-tests.package.test_python_txtorcon.TestPythonPy2Txtorcon: *runtime_test
-tests.package.test_python_txtorcon.TestPythonPy3Txtorcon: *runtime_test
 tests.package.test_rust.TestRust: *runtime_test
 tests.package.test_rust.TestRustBin: *runtime_test
 tests.package.test_syslog_ng.TestSyslogNg: *runtime_test
@@ -43,7 +43,8 @@ check-flake8:

 check-package:
    script:
-        - make check-package
+        - find . -type f \( -name '*.mk' -o -name '*.hash' -o -name 'Config.*' \)
+            -exec ./utils/check-package {} +

 .defconfig: &defconfig
    # Running the defconfigs for every push is too much, so limit to
@@ -62,11 +63,6 @@ check-package:
            - output/build/packages-file-list.txt

 .runtime_test: &runtime_test
-    # Running the runtime tests for every push is too much, so limit to
-    # explicit triggers through the API.
-    only:
-        - triggers
-        - tags
    # Keep build directories so the rootfs can be an artifact of the job. The
    # runner will clean up those files for us.
    # Multiply every emulator timeout by 10 to avoid sporadic failures in
@@ -1,272 +1,3 @@
-2018.11.2, Released January 30th, 2019
-
-	Important / security related fixes.
-
-	Defconfigs: Fixes for imx6slevk, imx7dsabresd, imx8mqevk, Lego
-	EV3, QEMU AArch64-virt
-
-	Download: Fix scp download handling
-
-	check-package: fix Python 3 support
-
-	get-developers: Fix behaviour when called from elsewhere than
-	the toplevel directory.
-
-	kconfig: Fix for make linux-menuconfig / uboot-menuconfig from
-	a clean tree when ccache is enabled.
-
-	cmake: Also set CMAKE_SYSTEM_VERSION in toolchainfile.cmake
-
-	Updated/fixed packages: acpica, apache, apr, avrdude, cargo,
-	cc-tool, dash, dhcpdump, dmalloc, docker-containerd, efivar,
-	fwts, glibc, gnuchess, gnupg2, go, leveldb, libarchive,
-	libassuan, libftdi1, libgpg-error, libhttpparser, libkcapi,
-	libmad, libsndfile, libsquish, liburiparser, libwebsock,
-	libxml2, lighttpd, llvm, lm-sensors, lua-msgpack-native, lxc,
-	mariadb, mbedtls, meson, mosquitto, netatalk, nodejs, odhcp6c,
-	openresolv, openssh, pango, patchelf, php, python-django,
-	python-numpy, python-pyyaml, rauc, rp-pppoe, s6-networking,
-	samba4, sdl_sound, shairport-sync, sqlite, subversion,
-	sunxi-cedarx, swupdate, systemd, tcpreplay, tekui, tmp2-abrmd,
-	tpm2-tools, tpm2-tss, udisks, unixodbc, usb_modeswitch,
-	webkitgtk, wireshark, wolfssl, xapp_rgb, xenomai, xerces
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#11576: Unable to start apache with event MPM on raspberry pi 3
-
-2018.11.1, Released December 20th, 2018
-
-	Important / security related fixes.
-
-	defconfigs: Fixes for bananapi m2 ultra, ci20
-
-	Download wrapper: Fix for urlencode handling
-
-	Updated/fixed packages: asterisk, docker-compose,
-	docker-engine, dt-utils, gnutls, go, grub, libbsd, libcurl,
-	libpgpme, libiscsi, liblo, libmpd, libopenssl, liboping,
-	libpam-tacplus, libpjsip, linux-firmware, liquid-dsp,
-	lua-cqueue, luvi, lxc, lynx, nginx, nodejs, openzwave, php,
-	pps-tools, proftpd, prosody, sdl2_net, squashfs, swupdate,
-	uclibc, vtu, webkitgtk, wine, xen
-
-	New packages: docker-cli
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#11426: pps-tools bash dependency
-	#11536: dt-utils building fails with glibc 2.28
-
-2018.11, Released December 1st, 2018
-
-	Minor fixes.
-
-	Updated/fixed packages: c-ares, quagga, squid
-
-2018.11-rc3, released November 30th, 2018
-
-	Fixes all over the tree.
-
-	Defconfigs: Fixes for Armadeus APF27, imx6sabre, Olimex A20
-	olinuxino lime legacy, Orangepi zero plus 2, PC, Riotboard.
-
-	graph-depends: Fix for package names starting with a non-alpha
-	character.
-
-	Updated/fixed packages: alsa-utils, botan, dante, domoticz,
-	dtc, freetype, gauche, gcc, gdb, ghostscript, glibc,
-	imx-usb-loader, libbsd, libid3tag, libkrb5, libmicrohttpd,
-	libopenssl, libsoxr, linux, motion, msgpack, mtd,
-	perl-net-ssleay, php, popt, python-numpy, qt5declarative,
-	samba4, shadowsocks-libev, stress-ng, systemd, usb_modeswitch,
-	webkitgtk, valgrind, weston, xfsprogs
-
-2018.11-rc2, released November 21th, 2018
-
-	Fixes all over the tree.
-
-	fs: Drop intermediate tarball from the filesystem handling to
-	fix an issue with xattrs handling related to fakeroot. Ensure
-	tarball target includes xattrs.
-
-	download: Fix confusion in git submodule handling if dl/ is a
-	symlink.
-
-	genrandconfig: Fix missing newline in BR2_WGET handling,
-	causing the following line to be ignored. This would affect
-	BR2_ENABLE_DEBUG, BR2_INIT_BUSYBOX, BR2_INIT_SYSTEMD,
-	BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV, BR2_STATIC_LIBS or
-	BR2_PACKAGE_PYTHON_PY_ONLY depending on the randomization.
-
-	show-build-order: Also include the dependencies of
-	rootfs-common.
-
-	Fix a number of build issues in packages for the recently
-	merged RISC-V architecture support.
-
-	Updated/fixed packages: dt-utils, easydbus, elfutils,
-	flare-engine, flatcc, glibc, gstreamer, gstreamer1, imx-uuc,
-	libassuan, libcorrect, libiscsi, libkrb5, libmicrohttpd,
-	libnftnl, libnspr, libnss, libsemanage, libsigsegv, libv4l,
-	ltp-testsuite, luv, luvi, make, ncmpc, netplug, openocd,
-	prosody, qemu, rpm, sconeserver, shadowsocks-libev,
-	supertuxcart, syslinux, systemd, trace-cmd, uclibc,
-	uclibc-ng-test, vtun, webkitgtk, weston, wireshark, xen,
-	xlib_libfontenc
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#11086: download/git submodule breaks on symlinked dl folder
-	#11216: Capabilities not applied to filesystem
-
-2018.11-rc1, released November 9th, 2018
-
-	Fixes all over the tree and new features.
-
-	Architecture: RISC-V support (64bit) added.
-
-	Toolchain: Glibc bumped to 2.28. Fortran support for external
-	toolchains. ARM (Linaro) toolchains updated to 8.2-2018.08.
-
-	Hardening flags (RELRO) are now handled by the toolchain
-	wrapper instead of explicitly through CFLAGS/LDFLAGS, fixing a
-	number of issues.
-
-	Filesystems: Support for creating btrfs and f2fs filesystems
-	added.
-
-	Add a number of patches to fix build errors for host utilities
-	on modern distributions using glibc-2.28.
-
-	mkusers: Ensure existing group members are preserved when a
-	group is reprocessed.
-
-	printvars: Fix issue with exceeding shell command line length
-	limits for certain setups.
-
-	Workaround added for incompatibility issues between host-dtc
-	and older U-Boot and Linux kernel versions.
-
-	Detect and reject build paths containing '@', as this confuses
-	a number of packages, including GCC.
-
-	utils/diffconfig: Make it work for (non-Buildroot) config
-	files not using the BR2_ prefix.
-
-	New defconfigs: Amarula a64-relic, Bananapi m2 ultra, Embest
-	riotboard, Hardkernel Odroid XU-4, QEMU riscv64-virt.
-	olimex_a20_olinuxion_lime_mali is renamed to _legacy.
-
-	OpenCL infrastructure support added, similar to how OpenGL is
-	handled.
-
-	Linux-headers: Support for kernel headers from a custom
-	tarball / git repo added.
-
-	New packages: bird, bluez5_utils-headers, btrfs-progs,
-	checksec, davici, duktape, ell, haproxy, libclc, libcorrect,
-	libopencl, libopenresolv, nss-myhostname,
-	perl-apache-logformat-compiler, perl-appconfig,
-	perl-astro-suntime, perl-class-inspector, perl-class-load,
-	perl-class-method-modifiers, perl-class-std,
-	perl-class-std-fast, perl-cookie-baker, perl-data-dump,
-	perl-data-optlist, perl-data-uuid, perl-data-manip,
-	perl-dbd-mysql, perl-dbi, perl-devel-globaldestruction,
-	perl-devel-stacktrace, perl-devel-stacktrace-ashtml,
-	perl-device-serialport, perl-dist-checkconflicts,
-	perl-exporter-tiny, perl-file-sharedir, perl-file-slurp,
-	perl-filesys-notify-simple, perl-hash-multivalue,
-	perl-http-entity-parser, perl-http-headers-fast,
-	perl-http-multipartparser, perl-io-interface,
-	perl-io-socket-multicast, perl-json-maybexs, perl-mime-tools,
-	perl-module-implementation, perl-module-runtime, perl-moo,
-	perl-number-bytes-human, perl-package-stash, perl-params-util,
-	perl-plack, perl-posix-strftime-compiler, perl-role-tiny,
-	perl-streams-buffered, perl-sub-exporter-progressive,
-	perl-sub-install, perl-sub-quote, perl-sys-cpu,
-	perl-sys-meminfo, perl-sys-mmap, perl-time-parsedate,
-	perl-type-tiny, perl-www-form-urlencoded, perl-x10, pigpio,
-	python-async-timeout, python-falcon, python-fire,
-	python-mimeparse, python-multidict, python-passlib,
-	python-pigpio, python-pip, python-ply, python-py,
-	python-pyasn1, python-pyasn1-modules, python-pycryptodomex,
-	python-pyhamcrest, python-pysmi, python-scapy, python-semver,
-	python-serial-asyncio, python-typing, python-uvloop,
-	pythonwrapt, python-yarl, python-zeroconf, riscv-pk, sedutil,
-	spandsp, tini, waffle, xapian
-
-	Removed packages: bootutils, dsp-tools, expedite, gst-dsp,
-	xloader
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#11116: Buildroot should set PYTHON_EGG_CACHE instead of writing ..
-	#11156: In python3 module 'socket' has no attribute 'AF_BLUETOOTH'
-	#11166: Erlang bad argument on valid uint64 when crosscompiled on..
-	#11206: zlib: fails to build with Linaro toolchain, BR2_RELRO_FULL..
-	#11241: ACPID shouldn't depend on BR2_x86_64 || BR2_i386
-	#11251: Util scanpypi failes when package change - to _ in tar file
-	#11266: qt5base-5.11.1 does not compile with musl, complains about..
-	#11286: python-rpi-gpio only should depend on BR2_arm || BR2_aarch64
-	#11321: Latest master fails to build readline with RELRO FULL
-	#11326: sysvinit fails to build in latest GIT master
-	#11331: Internal application no longer builds with latest GIT master
-	#11336: nfs-utils fails to build in latest GIT master
-	#11351: build root-2018-08, linaro aarch64 compile error
-	#11376: mdmon binary missing
-	#11391: Valgind availability on ARM
-	#11396: uboot environment image checksum invalid if target is big endian
-	#11421: GCC error message for ARM Cortex-A9/ARM.V7
-	#11451: Can't find libmpfr.so.4 when using external toolchain on ubuntu..
-	#11481: Docs: Is external.desc required?
-
-2018.08.3, Released November 26th, 2018
-
-	Important / security related fixes.
-
-	fs: Drop intermediate tarball from the filesystem handling to
-	fix an issue with xattrs handling related to fakeroot. Ensure
-	tarball target includes xattrs.
-
-	download: Fix confusion in git submodule handling if dl/ is a
-	symlink.
-
-	toolchain: Only allow enabling stack protection on
-	architectures with control flow integrity (CFI) support. Only
-	allow FORTIFY_SOURCE support on gcc >= 6.
-
-	genrandconfig: Fix missing newline in BR2_WGET handling,
-	causing the following line to be ignored. This would affect
-	BR2_ENABLE_DEBUG, BR2_INIT_BUSYBOX, BR2_INIT_SYSTEMD,
-	BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV, BR2_STATIC_LIBS or
-	BR2_PACKAGE_PYTHON_PY_ONLY depending on the randomization.
-
-	show-build-order: Also include the dependencies of
-	rootfs-common.
-
-	Defconfigs: Fixes for Armadeus APF27, imx6sabre, Olimex A20
-	olinuxino lime legacy, Orangepi zero plus 2.
-
-	graph-depends: Fix for package names starting with a non-alpha
-	character.
-
-	Updated/fixed packages: attr, audit, bind, brotli, busybox,
-	dtc, easydbus, elfutils, flare-engine, flatcc, gauche, gcc,
-	giflib, gpsd, lcdproc, libcurl, libiscsi, libkcapi, libnfs,
-	libnspr, libnss, libsemanage, liburiparser, lighttpd,
-	lua-curl, mariadb, mmc, mosquitto, mysql, ncmpc, neardal,
-	netplug, network-manager, nfs-utils, nginx, openocd, openswan,
-	p11-kit, postgresql, prosody, qemu, qt, rpm, ruby, samba4,
-	squid, supertuxkart, systemd, tar, trace-cmd, traceroute,
-	twolame, uclibc, usb_modeswitch, vtun, webkitgtk, weston,
-	xdriver_xf86-video-geode, xlib_libfontenc, xserver_xorg-server
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#11086: download/git submodule breaks on symlinked dl folder
-	#11481: Docs: Is external.desc required?
-
 2018.08.2, Released October 25th, 2018

 	Important / security related fixes.
@@ -481,30 +212,6 @@
 	#11121: statfs call corrupts memory struct statfs  too small
 	#11181: Switching toolchain does not work

-2018.05.3, Released October 6th, 2018
-
-	Important / security related fixes.
-
-	Add a number of patches to fix build errors for host utilities
-	on modern distributions using glibc-2.28.
-
-	mkusers: Ensure existing group members are preserved when a
-	group is reprocessed.
-
-	printvars: Fix issue with exceeding shell command line length
-	limits for certain setups.
-
-	Updated/fixed packages: acpid, android-tools, apache,
-	arp-scan, bandwidthd, bind, bison, brltty, chipmunk, connman,
-	cppcms, fio, gcc, ghostscript, gnupg, httping, igmpproxy,
-	imagemagick, imlib2, ipsec-tools, lcm2, libcurl, libesmtp,
-	libnfs, libssh, libxslt, links, mediastreamer, minicom,
-	moarvm, nilfs-utils, ocrad, parted, php, postgresql, pv,
-	python-django, qt, qt5quickcontrols, qt5webengine, screen,
-	sdl2, shairport-sync, squashfs, strongswan, vboot-utils,
-	webkitgtk, wireguard, x265, xen, xlib_libXfont, xlib_libXft,
-	xlib_libxshmfence, zeromq
-
 2018.05.2, Released August 28th, 2018

 	Important / security related fixes.
@@ -759,106 +466,6 @@
 	#10961: Grub2 fails to build for x86_64 when BR2_SSP_ALL is
 		enabled

-2018.02.8, Released November 26th, 2018
-
-	Important / security related fixes.
-
-	fs: Drop intermediate tarball from the filesystem handling to
-	fix an issue with xattrs handling related to fakeroot. Ensure
-	tarball target includes xattrs.
-
-	download: Fix confusion in git submodule handling if dl/ is a
-	symlink.
-
-	toolchain: Only allow enabling stack protection on
-	architectures with control flow integrity (CFI) support. Only
-	allow FORTIFY_SOURCE support on gcc >= 6.
-
-	genrandconfig: Fix missing newline in BR2_WGET handling,
-	causing the following line to be ignored. This would affect
-	BR2_ENABLE_DEBUG, BR2_INIT_BUSYBOX, BR2_INIT_SYSTEMD,
-	BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV, BR2_STATIC_LIBS or
-	BR2_PACKAGE_PYTHON_PY_ONLY depending on the randomization.
-
-	show-build-order: Also include the dependencies of
-	rootfs-common.
-
-	Defconfigs: Fixes for Armadeus APF27, imx6sabre.
-
-	graph-depends: Fix for package names starting with a non-alpha
-	character.
-
-	Updated/fixed packages: attr, audit, bind, brotli, easydbus,
-	elfutils, gauche, gcc, giflib, gpsd, lcdproc, libcurl,
-	libiscsi, libnfs, libnspr, libnss, libkcapi, libsemanage,
-	liburiparser, lighttpd, linux, lua-curl, mariadb, mmc-utils,
-	mosquitto, mysql, neardal, netplug, network-manager,
-	nfs-utils, nginx, openocd, openswan, p11-kit, postgresql,
-	prosody, qemu, qt, rpm, ruby, samba4, squid, supertuxkart,
-	systemd, tar, trace-cmd, traceroute, twolame, uclibc,
-	usb_modeswitch, vtun, webkitgtk, xdriver_xf86-video-geode,
-	xlib_libfontenc, xproto_inputproto, xserver_xorg-server
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#11086: download/git submodule breaks on symlinked dl folder
-	#11251: Util scanpypi failes when package change - to _ in..
-	#11476: stdio2.h error invalid use of __builtin_va_arg_pack
-	#11481: Docs: Is external.desc required?
-
-2018.02.7, Released October 25th, 2018
-
-	Important / security related fixes.
-
-	Detect and reject build paths containing '@', as this confuses
-	a number of packages, including GCC.
-
-	utils/get-developers: Add -e option for use with git
-	send-email.
-
-	utils/diffconfig: Make it work for (non-Buildroot) config
-	files not using the BR2_ prefix.
-
-	u-boot: Fix for environment image handling on big endian
-	systems.
-
-	Updated/fixed packages: binutils, ca-certificates,
-	cups-filters, erlang, file, freetype, gcc, git, gvfs, leveldb,
-	libarchive, libcurl, libssh, live555, ljlinenoise, mariadb,
-	mongoose, netsnmp, nmap, nodejs, ntp, open-plc-utils, poco,
-	psmisc, ptpd2, python-enum34, qemu, qt, qt5base, setools,
-	spice, spice-protocol, tinc, ustr, wireshark
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#11396: uboot environment image checksum invalid if target is big endian
-
-2018.02.6, Released October 7th, 2018
-
-	Important / security related fixes.
-
-	Add a number of patches to fix build errors for host utilities
-	on modern distributions using glibc-2.28.
-
-	mkusers: Ensure existing group members are preserved when a
-	group is reprocessed.
-
-	printvars: Fix issue with exceeding shell command line length
-	limits for certain setups.
-
-	Updated/fixes packages: acpid, android-tools, apache,
-	arp-scan, bandwidthd, bind, bison, clamav, connman, cppcms,
-	cramfs, fio, gcc, ghostscript, glibc, gnupg, httping,
-	igmpproxy, imagemagick, imlib2, ipsec-tools, lcms2, libcurl,
-	libesmtp, libnfs, libssh, libxslt, links, linuxptp,
-	mediastreamer, minicom, moarvm, nilfs-utils, ocrad, parted,
-	php, pv, python-django, qt, qt5quickcontrols, qt5webengine,
-	screen, sdl2, shairport-sync, squashfs, strongswan,
-	vboot-utils, webkitgtk, wireguard, x265, xen, xlib_libXfont,
-	xlib_libXft
-
-	New packages: brotli, woff2
-
 2018.02.5, Released August 29th, 2018

 	Important / security related fixes.
@@ -812,8 +812,6 @@ config BR2_FORTIFY_SOURCE_NONE

 config BR2_FORTIFY_SOURCE_1
 	bool "Conservative"
-	# gcc bug https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61164
-	depends on !BR2_TOOLCHAIN_BUILDROOT || BR2_TOOLCHAIN_GCC_AT_LEAST_6
 	help
 	  This option sets _FORTIFY_SOURCE to 1 and only introduces
 	  checks that shouldn't change the behavior of conforming
@@ -821,8 +819,6 @@ config BR2_FORTIFY_SOURCE_1

 config BR2_FORTIFY_SOURCE_2
 	bool "Aggressive"
-	# gcc bug https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61164
-	depends on !BR2_TOOLCHAIN_BUILDROOT || BR2_TOOLCHAIN_GCC_AT_LEAST_6
 	help
 	  This option sets _FORTIFY_SOURCES to 2 and some more
 	  checking is added, but some conforming programs might fail.
@@ -142,114 +142,9 @@ comment "unpredictable ways.                                 "
 comment "----------------------------------------------------"
 endif

-###############################################################################
-comment "Legacy options removed in 2018.11"
-
-config BR2_TARGET_XLOADER
-	bool "xloader has been removed"
-	select BR2_LEGACY
-	help
-	  The package has been removed as u-boot SPL provides
-	  similar functionality
-
-config BR2_PACKAGE_TIDSP_BINARIES
-	bool "tidsp-binaries package removed"
-	select BR2_LEGACY
-	help
-	  The tidsp-binaries package was removed.
-
-config BR2_PACKAGE_DSP_TOOLS
-	bool "dsp-tools package removed"
-	select BR2_LEGACY
-	help
-	  The dsp-tools package was removed.
-
-config BR2_PACKAGE_GST_DSP
-	bool "gst-dsp package removed"
-	select BR2_LEGACY
-	help
-	  The gst-dsp package was removed.
-
-config BR2_PACKAGE_BOOTUTILS
-	bool "bootutils package removed"
-	select BR2_LEGACY
-	help
-	  The bootutils package was removed.
-
-config BR2_PACKAGE_EXPEDITE
-	bool "expedite package has been removed"
-	select BR2_LEGACY
-	help
-	  expedite is not actively maintained anymore.
-	  https://sourceforge.net/p/enlightenment/mailman/message/36428571
-
-config BR2_PACKAGE_MESA3D_OPENGL_TEXTURE_FLOAT
-	bool "mesa3d opengl texture float option removed"
-	select BR2_LEGACY
-	help
-	  mesa3d now unconditionally enables floating-point textures,
-	  as the corresponding patent has expired.
-
-config BR2_KERNEL_HEADERS_4_10
-	bool "kernel headers version 4.10.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 4.10.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_KERNEL_HEADERS_4_11
-	bool "kernel headers version 4.11.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 4.11.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_KERNEL_HEADERS_4_12
-	bool "kernel headers version 4.12.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 4.12.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_KERNEL_HEADERS_4_13
-	bool "kernel headers version 4.13.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 4.13.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_KERNEL_HEADERS_4_15
-	bool "kernel headers version 4.15.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 4.15.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_KERNEL_HEADERS_4_17
-	bool "kernel headers version 4.17.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 4.17.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_PACKAGE_LIBNFTNL_XML
-	bool "libnftl no longer supports XML output"
-	select BR2_LEGACY
-	help
-	  libnftnl removed integration with libmxml.
-
 ###############################################################################
 comment "Legacy options removed in 2018.08"

-config BR2_PACKAGE_DOCKER_ENGINE_STATIC_CLIENT
-	bool "docker-engine static client option renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_DOCKER_CLI_STATIC
-	help
-	  BR2_PACKAGE_DOCKER_ENGINE_STATIC_CLIENT has been renamed to
-	  BR2_PACKAGE_DOCKER_CLI_STATIC, following the package split of
-	  docker-engine and docker-cli.
-
 config BR2_PACKAGE_XSERVER_XORG_SERVER_V_1_19
 	bool "Modular X.org server was updated to version 1.20.0"
 	select BR2_LEGACY
@@ -1165,24 +1060,33 @@ comment "Legacy options removed in 2018.02"

 config BR2_KERNEL_HEADERS_3_4
 	bool "kernel headers version 3.4.x are no longer supported"
+	select BR2_KERNEL_HEADERS_4_1
 	select BR2_LEGACY
 	help
 	  Version 3.4.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
+	  maintained upstream and are now removed. As an alternative,
+	  version 4.1.x of the headers have been automatically
+	  selected in your configuration.

 config BR2_KERNEL_HEADERS_3_10
 	bool "kernel headers version 3.10.x are no longer supported"
+	select BR2_KERNEL_HEADERS_4_1
 	select BR2_LEGACY
 	help
 	  Version 3.10.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
+	  maintained upstream and are now removed. As an alternative,
+	  version 4.1.x of the headers have been automatically
+	  selected in your configuration.

 config BR2_KERNEL_HEADERS_3_12
 	bool "kernel headers version 3.12.x are no longer supported"
+	select BR2_KERNEL_HEADERS_4_1
 	select BR2_LEGACY
 	help
 	  Version 3.12.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
+	  maintained upstream and are now removed. As an alternative,
+	  version 4.1.x of the headers have been automatically
+	  selected in your configuration.

 config BR2_BINUTILS_VERSION_2_27_X
 	bool "binutils version 2.27 support removed"
@@ -1733,17 +1637,23 @@ config BR2_PACKAGE_GMOCK

 config BR2_KERNEL_HEADERS_4_8
 	bool "kernel headers version 4.8.x are no longer supported"
+	select BR2_KERNEL_HEADERS_4_4
 	select BR2_LEGACY
 	help
 	  Version 4.8.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
+	  maintained upstream and are now removed. As an alternative,
+	  version 4.4.x of the headers have been automatically
+	  selected in your configuration.

 config BR2_KERNEL_HEADERS_3_18
 	bool "kernel headers version 3.18.x are no longer supported"
+	select BR2_KERNEL_HEADERS_3_12
 	select BR2_LEGACY
 	help
 	  Version 3.18.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
+	  maintained upstream and are now removed. As an alternative,
+	  version 3.12.x of the headers have been automatically
+	  selected in your configuration.

 config BR2_GLIBC_VERSION_2_22
 	bool "glibc 2.22 removed"
@@ -1766,31 +1676,43 @@ config BR2_PACKAGE_PERL_DB_FILE

 config BR2_KERNEL_HEADERS_4_7
 	bool "kernel headers version 4.7.x are no longer supported"
+	select BR2_KERNEL_HEADERS_4_4
 	select BR2_LEGACY
 	help
 	  Version 4.7.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
+	  maintained upstream and are now removed. As an alternative,
+	  version 4.4.x of the headers have been automatically
+	  selected in your configuration.

 config BR2_KERNEL_HEADERS_4_6
 	bool "kernel headers version 4.6.x are no longer supported"
+	select BR2_KERNEL_HEADERS_4_4
 	select BR2_LEGACY
 	help
 	  Version 4.6.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
+	  maintained upstream and are now removed. As an alternative,
+	  version 4.4.x of the headers have been automatically
+	  selected in your configuration.

 config BR2_KERNEL_HEADERS_4_5
 	bool "kernel headers version 4.5.x are no longer supported"
+	select BR2_KERNEL_HEADERS_4_4
 	select BR2_LEGACY
 	help
 	  Version 4.5.x of the Linux kernel headers are no longer
-	   maintained upstream and are now removed.
+	   maintained upstream and are now removed. As an alternative,
+	   version 4.4.x of the headers have been automatically
+	   selected in your configuration.

 config BR2_KERNEL_HEADERS_3_14
 	bool "kernel headers version 3.14.x are no longer supported"
+	select BR2_KERNEL_HEADERS_3_12
 	select BR2_LEGACY
 	  help
 	  Version 3.14.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
+	  maintained upstream and are now removed. As an alternative,
+	  version 3.12.x of the headers have been automatically
+	  selected in your configuration.

 config BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS
 	bool "musl-cross 1.1.12 toolchain removed"
@@ -1919,17 +1841,23 @@ config BR2_PACKAGE_SSTRIP

 config BR2_KERNEL_HEADERS_4_3
 	bool "kernel headers version 4.3.x are no longer supported"
+	select BR2_KERNEL_HEADERS_4_1
 	select BR2_LEGACY
 	help
 	  Version 4.3.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
+	  maintained upstream and are now removed. As an alternative,
+	  version 4.1.x of the headers have been automatically
+	  selected in your configuration.

 config BR2_KERNEL_HEADERS_4_2
 	bool "kernel headers version 4.2.x are no longer supported"
+	select BR2_KERNEL_HEADERS_4_1
 	select BR2_LEGACY
 	help
 	  Version 4.2.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
+	  maintained upstream and are now removed. As an alternative,
+	  version 4.1.x of the headers have been automatically
+	  selected in your configuration.

 config BR2_PACKAGE_KODI_ADDON_XVDR
 	bool "kodi-addon-xvdr removed"
@@ -2004,18 +1932,24 @@ config BR2_GCC_VERSION_4_8_ARC

 config BR2_KERNEL_HEADERS_4_0
 	bool "kernel headers version 4.0.x are no longer supported"
+	select BR2_KERNEL_HEADERS_3_12
 	select BR2_LEGACY
 	help
 	  Version 4.0.x of the Linux kernel headers have been deprecated
 	  for more than four buildroot releases and are now removed.
+	  As an alternative, version 3.12.x of the headers have been
+	  automatically selected in your configuration.

 config BR2_KERNEL_HEADERS_3_19
 	bool "kernel headers version 3.19.x are no longer supported"
+	select BR2_KERNEL_HEADERS_3_12
 	select BR2_LEGACY
 	help
 	  Version 3.19.x of the Linux kernel headers have been
 	  deprecated for more than four buildroot releases and are now
 	  removed.
+	  As an alternative, version 3.12.x of the headers have been
+	  automatically selected in your configuration.

 config BR2_PACKAGE_LIBEVAS_GENERIC_LOADERS
 	bool "libevas-generic-loaders package removed"
@@ -2228,11 +2162,14 @@ config BR2_PACKAGE_XDRIVER_XF86_INPUT_VOID

 config BR2_KERNEL_HEADERS_3_17
 	bool "kernel headers version 3.17.x are no longer supported"
+	select BR2_KERNEL_HEADERS_3_12
 	select BR2_LEGACY
 	help
 	  Version 3.17.x of the Linux kernel headers have been
 	  deprecated for more than four buildroot releases and are now
 	  removed.
+	  As an alternative, version 3.12.x of the headers have been
+	  automatically selected in your configuration.

 config BR2_GDB_VERSION_7_7
 	bool "gdb 7.7 has been removed"
@@ -2373,11 +2310,14 @@ config BR2_PACKAGE_CUPS_PDFTOPS

 config BR2_KERNEL_HEADERS_3_16
 	bool "kernel headers version 3.16.x are no longer supported"
+	select BR2_KERNEL_HEADERS_3_12
 	select BR2_LEGACY
 	help
 	  Version 3.16.x of the Linux kernel headers have been
 	  deprecated for more than four buildroot releases and are now
 	  removed.
+	  As an alternative, version 3.12.x of the headers have been
+	  automatically selected in your configuration.

 config BR2_PACKAGE_PYTHON_PYXML
 	bool "python-pyxml package has been removed"
@@ -2578,34 +2518,46 @@ config BR2_PACKAGE_BLACKBOX

 config BR2_KERNEL_HEADERS_3_0
 	bool "kernel headers version 3.0.x are no longer supported"
+	select BR2_KERNEL_HEADERS_3_2
 	select BR2_LEGACY
 	help
 	  Version 3.0.x of the Linux kernel headers have been deprecated
 	  for more than four buildroot releases and are now removed.
+	  As an alternative, version 3.2.x of the headers have been
+	  automatically selected in your configuration.

 config BR2_KERNEL_HEADERS_3_11
 	bool "kernel headers version 3.11.x are no longer supported"
+	select BR2_KERNEL_HEADERS_3_10
 	select BR2_LEGACY
 	help
 	  Version 3.11.x of the Linux kernel headers have been
 	  deprecated for more than four buildroot releases and are now
 	  removed.
+	  As an alternative, version 3.10.x of the headers have been
+	  automatically selected in your configuration.

 config BR2_KERNEL_HEADERS_3_13
 	bool "kernel headers version 3.13.x are no longer supported"
+	select BR2_KERNEL_HEADERS_3_12
 	select BR2_LEGACY
 	help
 	  Version 3.13.x of the Linux kernel headers have been
 	  deprecated for more than four buildroot releases and are now
 	  removed.
+	  As an alternative, version 3.12.x of the headers have been
+	  automatically selected in your configuration.

 config BR2_KERNEL_HEADERS_3_15
 	bool "kernel headers version 3.15.x are no longer supported"
+	select BR2_KERNEL_HEADERS_3_12
 	select BR2_LEGACY
 	help
 	  Version 3.15.x of the Linux kernel headers have been
 	  deprecated for more than four buildroot releases and are now
 	  removed.
+	  As an alternative, version 3.12.x of the headers have been
+	  automatically selected in your configuration.

 config BR2_PACKAGE_DIRECTFB_EXAMPLES_ANDI
 	bool "DirectFB example df_andi has been removed"
@@ -3432,10 +3384,13 @@ config BR2_PACKAGE_LIBELF

 config BR2_KERNEL_HEADERS_3_8
 	bool "kernel headers version 3.8.x are no longer supported"
+	select BR2_KERNEL_HEADERS_3_4
 	select BR2_LEGACY
 	help
 	  Version 3.8.x of the Linux kernel headers have been deprecated
 	  for more than four buildroot releases and are now removed.
+	  As an alternative, version 3.4.x of the headers have been
+	  automatically selected in your configuration.

 config BR2_PACKAGE_GETTEXT_TOOLS
 	bool "support for gettext-tools on target has been removed"
@@ -3588,17 +3543,23 @@ config BR2_PACKAGE_EVTEST_CAPTURE

 config BR2_KERNEL_HEADERS_3_6
 	bool "kernel headers version 3.6.x are no longer supported"
+	select BR2_KERNEL_HEADERS_3_4
 	select BR2_LEGACY
 	help
 	  Version 3.6.x of the Linux kernel headers have been deprecated
 	  for more than four buildroot releases and are now removed.
+	  As an alternative, version 3.4.x of the headers have been
+	  automatically selected in your configuration.

 config BR2_KERNEL_HEADERS_3_7
 	bool "kernel headers version 3.7.x are no longer supported"
+	select BR2_KERNEL_HEADERS_3_4
 	select BR2_LEGACY
 	help
 	  Version 3.7.x of the Linux kernel headers have been deprecated
 	  for more than four buildroot releases and are now removed.
+	  As an alternative, version 3.4.x of the headers have been
+	  automatically selected in your configuration.

 config BR2_PACKAGE_VALA
 	bool "vala target package has been removed"
@@ -3760,24 +3721,33 @@ config BR2_sh3eb

 config BR2_KERNEL_HEADERS_3_1
 	bool "kernel headers version 3.1.x are no longer supported"
+	select BR2_KERNEL_HEADERS_3_2
 	select BR2_LEGACY
 	help
 	  Version 3.1.x of the Linux kernel headers have been deprecated
 	  for more than four buildroot releases and are now removed.
+	  As an alternative, version 3.2.x of the headers have been
+	  automatically selected in your configuration.

 config BR2_KERNEL_HEADERS_3_3
 	bool "kernel headers version 3.3.x are no longer supported"
+	select BR2_KERNEL_HEADERS_3_2
 	select BR2_LEGACY
 	help
 	  Version 3.3.x of the Linux kernel headers have been deprecated
 	  for more than four buildroot releases and are now removed.
+	  As an alternative, version 3.2.x of the headers have been
+	  automatically selected in your configuration.

 config BR2_KERNEL_HEADERS_3_5
 	bool "kernel headers version 3.5.x are no longer supported"
+	select BR2_KERNEL_HEADERS_3_4
 	select BR2_LEGACY
 	help
 	  Version 3.5.x of the Linux kernel headers have been deprecated
 	  for more than four buildroot releases and are now removed.
+	  As an alternative, version 3.4.x of the headers have been
+	  automatically selected in your configuration.

 config BR2_GDB_VERSION_7_2
 	bool "gdb 7.2.x is no longer supported"
@@ -53,7 +53,6 @@ F:	package/nginx-naxsi/
 F:	package/policycoreutils/
 F:	package/python-flask-sqlalchemy/
 F:	package/python-mutagen/
-F:	package/python-pip/
 F:	package/python-psycopg2/
 F:	package/python-sqlalchemy/
 F:	package/python-visitor/
@@ -71,7 +70,6 @@ F:	package/webkitgtk/
 F:	package/woff2/

 N:	Adrien Gallouët <adrien@gallouet.fr>
-F:	package/bird/
 F:	package/glorytun/

 N:	Aleksander Morgado <aleksander@aleksander.es>
@@ -200,7 +198,10 @@ F:	package/stress/

 N:	Asaf Kahlon <asafka7@gmail.com>
 F:	package/libuv/
-F:	package/python*
+F:	package/python-jsonmodels/
+F:	package/python-reentry/
+F:	package/python-subprocess32/
+F:	package/python-yieldfrom/
 F:	package/zeromq/

 N:	Ash Charles <ash.charles@savoirfairelinux.com>
@@ -329,7 +330,6 @@ F:	package/libyuv/
 F:	package/mesa3d/
 F:	package/minidlna/
 F:	package/mjpg-streamer/
-F:	package/perl-crypt-openssl-guess/
 F:	package/perl-crypt-openssl-random/
 F:	package/perl-crypt-openssl-rsa/
 F:	package/perl-digest-sha1/
@@ -374,7 +374,6 @@ F:	package/python-slob/
 F:	package/rtmpdump/
 F:	package/samba4/
 F:	package/softether/
-F:	package/spandsp/
 F:	package/sqlite/
 F:	package/taglib/
 F:	package/tinyxml2/
@@ -413,7 +412,6 @@ N:	Carlo Caione <carlo.caione@gmail.com>
 F:	package/sunxi-boards/

 N:	Carlos Santos <casantos@datacom.com.br>
-F:	package/aer-inject/
 F:	package/busybox/
 F:	package/gtest/
 F:	package/initscripts/
@@ -469,11 +467,9 @@ F:	package/batman-adv/
 F:	package/docker-containerd/
 F:	package/docker-engine/
 F:	package/docker-proxy/
-F:	package/go/
 F:	package/mosh/
 F:	package/rtl8821au/
 F:	package/runc/
-F:	package/tini/

 N:	Christophe Vu-Brugier <cvubrugier@fastmail.fm>
 F:	package/drbd-utils/
@@ -483,37 +479,6 @@ F:	package/python-rtslib-fb/
 F:	package/python-urwid/
 F:	package/targetcli-fb/

-N:	Christopher McCrory <chrismcc@gmail.com>
-F:	package/perl-appconfig/
-F:	package/perl-astro-suntime/
-F:	package/perl-class-load/
-F:	package/perl-class-std/
-F:	package/perl-class-std-fast/
-F:	package/perl-data-dump/
-F:	package/perl-data-optlist/
-F:	package/perl-data-uuid/
-F:	package/perl-date-manip/
-F:	package/perl-dbd-mysql/
-F:	package/perl-dbi/
-F:	package/perl-device-serialport/
-F:	package/perl-dist-checkconflicts/
-F:	package/perl-file-slurp/
-F:	package/perl-io-interface/
-F:	package/perl-io-socket-multicast/
-F:	package/perl-json-maybexs/
-F:	package/perl-mime-tools/
-F:	package/perl-module-implementation/
-F:	package/perl-module-runtime/
-F:	package/perl-number-bytes-human/
-F:	package/perl-package-stash/
-F:	package/perl-params-util/
-F:	package/perl-sub-install/
-F:	package/perl-sys-cpu/
-F:	package/perl-sys-meminfo/
-F:	package/perl-sys-mmap/
-F:	package/perl-time-parsedate/
-F:	package/perl-x10/
-
 N:	Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
 F:	package/audit/
 F:	package/checkpolicy/
@@ -728,7 +693,6 @@ F:	package/alljoyn-tcl/
 F:	package/alljoyn-tcl-base/
 F:	package/boinc/
 F:	package/cairo/
-F:	package/duktape/
 F:	package/expat/
 F:	package/flatbuffers/
 F:	package/gtksourceview/
@@ -736,7 +700,6 @@ F:	package/gssdp/
 F:	package/gupnp/
 F:	package/gupnp-dlna/
 F:	package/gupnp-tools/
-F:	package/haproxy/
 F:	package/hiredis/
 F:	package/i2pd/
 F:	package/igd2-for-linux/
@@ -876,7 +839,6 @@ F:	package/leptonica/
 F:	package/ocrad/
 F:	package/tesseract-ocr/
 F:	package/webp/
-F:	package/xapian/

 N:	Giulio Benetti <giulio.benetti@micronovasrl.com>
 F:	package/sunxi-mali-mainline/
@@ -891,15 +853,6 @@ F:	package/libsrtp/
 F:	package/libwebsock/
 F:	package/sofia-sip/

-N:	Grzegorz Blach <grzegorz@blach.pl>
-F:	fs/f2fs/
-F:	package/bluez5_utils-headers/
-F:	package/f2fs-tools/
-F:	package/pigpio/
-F:	package/python-falcon/
-F:	package/python-mimeparse/
-F:	package/python-pigpio/
-
 N:	Guillaume Gardet <guillaume.gardet@oliseo.fr>
 F:	package/c-icap/
 F:	package/c-icap-modules/
@@ -915,10 +868,6 @@ F:	arch/Config.in.csky
 F:	board/csky/
 F:	configs/csky_*

-N:	Gustavo Pimentel <gustavo.pimentel@synopsys.com>
-F:	configs/arm_juno_defconfig
-F:	board/arm/juno/
-
 N:	Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
 F:	package/gnuradio/
 F:	package/gqrx/
@@ -963,7 +912,6 @@ F:	board/orangepi/orangepi-prime/
 F:	board/orangepi/orangepi-win/
 F:	board/orangepi/orangepi-zero-plus2/
 F:	board/pine64/
-F:	configs/amarula_a64_relic_defconfig
 F:	configs/amarula_vyasa_rk3288_defconfig
 F:	configs/asus_tinker_rk3288_defconfig
 F:	configs/bananapi_m1_defconfig
@@ -983,11 +931,6 @@ F:	configs/orangepi_zero_plus2_defconfig
 F:	configs/pine64_defconfig
 F:	configs/pine64_sopine_defconfig

-N:	James Hilliard <james.hilliard1@gmail.com>
-F:	package/python-async-timeout/
-F:	package/python-multidict/
-F:	package/python-yarl/
-
 N:	James Knight <james.knight@rockwellcollins.com>
 F:	package/atkmm/
 F:	package/cairomm/
@@ -1018,9 +961,6 @@ F:	package/python-pexpect/
 F:	package/python-ptyprocess/
 F:	package/zynq-boot-bin/

-N:	Jared Bents <jared.bents@rockwellcollins.com>
-F:	package/davici/
-
 N:	Jarkko Sakkinen <jarkko.sakkinen@intel.com>
 F:	package/quota/

@@ -1054,7 +994,6 @@ N:	Joel Carlson <JoelsonCarl@gmail.com>
 F:	package/capnproto/
 F:	package/cmocka/
 F:	package/flatcc/
-F:	package/libcorrect/

 N:	Joel Stanley <joel@jms.id.au>
 F:	package/pdbg/
@@ -1309,13 +1248,6 @@ F:	package/lynx/
 N:	Mario Rugiero <mrugiero@gmail.com>
 F:	package/ratpoison/

-N:	Mark Corbin <mark.corbin@embecosm.com>
-F:	arch/arch.mk.riscv
-F:	arch/Config.in.riscv
-F:	board/qemu/riscv64-virt/
-F:	boot/riscv-pk/
-F:	configs/qemu_riscv64_virt_defconfig
-
 N:	Markos Chandras <markos.chandras@imgtec.com>
 F:	package/harfbuzz/
 F:	package/libsecret/
@@ -1358,7 +1290,6 @@ F:	package/aufs-util/
 F:	package/bc/
 F:	package/bridge-utils/
 F:	package/checkpolicy/
-F:	package/checksec/
 F:	package/cgroupfs-mount/
 F:	package/crda/
 F:	package/devmem2/
@@ -1400,7 +1331,6 @@ F:	package/mtd/
 F:	package/mtools/
 F:	package/nginx-upload/
 F:	package/omniorb/
-F:	package/openresolv/
 F:	package/paxtest/
 F:	package/picocom/
 F:	package/policycoreutils/
@@ -1418,7 +1348,6 @@ F:	package/rsyslog/
 F:	package/setools/
 F:	package/smcroute/
 F:	package/tclap/
-F:	package/tini/
 F:	package/uboot-tools/
 F:	package/unionfs/
 F:	package/valijson/
@@ -1524,6 +1453,9 @@ F:	package/libgeotiff/
 N:	Mylène Josserand <mylene.josserand@bootlin.com>
 F:	package/rtl8723bu/

+N:	Nathan Lynch <ntl@pobox.com>
+F:	package/chrony/
+
 N:	Nathaniel Roach <nroach44@gmail.com>
 F:	package/bandwidthd/
 F:	package/libgudev/
@@ -1540,10 +1472,6 @@ F:	package/exiv2/
 F:	package/nvidia-tegra23/nvidia-tegra23-binaries/
 F:	package/nvidia-tegra23/nvidia-tegra23-codecs/

-N:	Nikolay Dimitrov <nikolay.dimitrov@retrohub.org>
-F:	board/embest/riotboard/
-F:	configs/riotboard_defconfig
-
 N:	Nimai Mahajan <nimaim@gmail.com>
 F:	package/libucl/

@@ -1580,9 +1508,6 @@ F:	package/openjpeg/
 N:	Olivier Singla <olivier.singla@gmail.com>
 F:	package/shellinabox/

-N:	Paresh Chaudhary <paresh.chaudhary@rockwellcollins.com>
-F:	package/checksec/
-
 N:	Parnell Springmeyer <parnell@digitalmentat.com>
 F:	package/scrypt/

@@ -1638,12 +1563,10 @@ F:	package/python-ipaddr/
 F:	package/python-pam/
 F:	package/python-psutil/
 F:	package/python-request-id/
-F:	package/python-semver/
 F:	package/python-texttable/
 F:	package/python-validators/
 F:	package/python-webob/
 F:	package/python-websocket-client/
-F:	package/sedutil/
 F:	package/triggerhappy/

 N:	Peter Seiderer <ps.report@gmx.net>
@@ -1655,7 +1578,6 @@ F:	package/ddrescue/
 F:	package/dejavu/
 F:	package/dillo/
 F:	package/edid-decode/
-F:	package/ell/
 F:	package/ghostscript-fonts/
 F:	package/gstreamer1/gst1-interpipe/
 F:	package/gstreamer1/gst1-validate/
@@ -1706,10 +1628,6 @@ F:	package/lttng-tools/
 F:	package/python-ipython/
 F:	package/liburcu/

-N:	Pierre Crokaert <pct@crookies.net>
-F:	board/hardkernel/odroidxu4/
-F:	configs/odroidxu4_defconfig
-
 N:	Pierre Ducroquet <pinaraf@pinaraf.info>
 F:	package/kf5/

@@ -1782,6 +1700,7 @@ F:	package/aubio/
 F:	package/bullet/
 F:	package/efl/
 F:	package/enlightenment/
+F:	package/expedite/
 F:	package/flare-engine/
 F:	package/flare-game/
 F:	package/irrlicht/
@@ -1804,11 +1723,7 @@ F:	package/supertuxkart/
 F:	package/terminology/
 F:	package/tk/
 F:	package/upower/
-F:	package/waffle/
 F:	package/xenomai/
-F:	toolchain/toolchain-external/toolchain-external-arm-aarch64/
-F:	toolchain/toolchain-external/toolchain-external-arm-aarch64-be/
-F:	toolchain/toolchain-external/toolchain-external-arm-arm/

 N:	Roman Gorbenkov <roman.gorbenkov@ens2m.org>
 F:	package/davfs2/
@@ -1859,6 +1774,13 @@ N:	Scott Fan <fancp2007@gmail.com>
 F:	package/libssh/
 F:	package/x11r7/xdriver_xf86-video-fbturbo/

+N:	Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
+F:	package/atf/
+F:	package/cppunit/
+F:	package/kyua/
+F:	package/lutok/
+F:	package/yaml-cpp/
+
 N:	Sébastien Szymanski <sebastien.szymanski@armadeus.com>
 F:	package/mmc-utils/
 F:	package/python-flask-jsonrpc/
@@ -2084,6 +2006,9 @@ F:	package/wayland/
 F:	package/weston/
 F:	toolchain/

+N:	Tiago Brusamarello <tiago.brusamarello@datacom.com.br>
+F:	package/aer-inject/
+
 N:	Timo Ketola <timo.ketola@exertus.fi>
 F:	package/fbgrab/

@@ -2093,7 +2018,6 @@ F:	package/tstools/

 N:	Valentin Korenblit <valentinkorenblit@gmail.com>
 F:	package/clang/
-F:	package/libclc/
 F:	package/llvm/

 N:	Vanya Sergeev <vsergeev@gmail.com>
@@ -2112,9 +2036,6 @@ F:	package/openmpi/
 F:	package/pinentry/
 F:	package/trinity/

-N:	Vincent Prince <vincent.prince.fr@gmail.com>
-F:	package/nss-myhostname/
-
 N:	Vincent Stehlé <vincent.stehle@laposte.net>
 F:	package/i7z/
 F:	package/msr-tools/
@@ -2,7 +2,7 @@
 #
 # Copyright (C) 1999-2005 by Erik Andersen <andersen@codepoet.org>
 # Copyright (C) 2006-2014 by the Buildroot developers <buildroot@uclibc.org>
-# Copyright (C) 2014-2019 by the Buildroot developers <buildroot@buildroot.org>
+# Copyright (C) 2014-2018 by the Buildroot developers <buildroot@buildroot.org>
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -92,9 +92,9 @@ all:
 .PHONY: all

 # Set and export the version string
-export BR2_VERSION := 2018.11.2
+export BR2_VERSION := 2018.08.2
 # Actual time the release is cut (for reproducible builds)
-BR2_VERSION_EPOCH = 1545257000
+BR2_VERSION_EPOCH = 1540470000

 # Save running make version since it's clobbered by the make package
 RUNNING_MAKE_VERSION := $(MAKE_VERSION)
@@ -133,9 +133,9 @@ export BR2_VERSION_FULL := $(BR2_VERSION)$(shell $(TOPDIR)/support/scripts/setlo

 # List of targets and target patterns for which .config doesn't need to be read in
 noconfig_targets := menuconfig nconfig gconfig xconfig config oldconfig randconfig \
-	defconfig %_defconfig allyesconfig allnoconfig alldefconfig syncconfig release \
+	defconfig %_defconfig allyesconfig allnoconfig alldefconfig silentoldconfig release \
 	randpackageconfig allyespackageconfig allnopackageconfig \
-	print-version olddefconfig distclean manual manual-% check-package
+	print-version olddefconfig distclean manual manual-%

 # Some global targets do not trigger a build, but are used to collect
 # metadata, or do various checks. When such targets are triggered,
@@ -444,7 +444,6 @@ KERNEL_ARCH := $(shell echo "$(ARCH)" | sed -e "s/-.*//" \
 	-e s/parisc64/parisc/ \
 	-e s/powerpc64.*/powerpc/ \
 	-e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
-	-e s/riscv.*/riscv/ \
 	-e s/sh.*/sh/ \
 	-e s/microblazeel/microblaze/)

@@ -505,9 +504,9 @@ include Makefile.legacy

 include system/system.mk
 include package/Makefile.in
-# arch/arch.mk must be after package/Makefile.in because it may need to
+# arch/arch.mk.* must be after package/Makefile.in because it may need to
 # complement variables defined therein, like BR_NO_CHECK_HASH_FOR.
-include arch/arch.mk
+-include $(sort $(wildcard arch/arch.mk.*))
 include support/dependencies/dependencies.mk

 include $(sort $(wildcard toolchain/*.mk))
@@ -577,7 +576,7 @@ dirs: $(BUILD_DIR) $(STAGING_DIR) $(BASE_TARGET_DIR) \
 	$(HOST_DIR) $(HOST_DIR_SYMLINK) $(BINARIES_DIR)

 $(BUILD_DIR)/buildroot-config/auto.conf: $(BR2_CONFIG)
-	$(MAKE1) $(EXTRAMAKEARGS) HOSTCC="$(HOSTCC_NOCCACHE)" HOSTCXX="$(HOSTCXX_NOCCACHE)" syncconfig
+	$(MAKE1) $(EXTRAMAKEARGS) HOSTCC="$(HOSTCC_NOCCACHE)" HOSTCXX="$(HOSTCXX_NOCCACHE)" silentoldconfig

 .PHONY: prepare
 prepare: $(BUILD_DIR)/buildroot-config/auto.conf
@@ -585,8 +584,8 @@ prepare: $(BUILD_DIR)/buildroot-config/auto.conf
 .PHONY: world
 world: target-post-image

-.PHONY: prepare-sdk
-prepare-sdk: world
+.PHONY: sdk
+sdk: world
 	@$(call MESSAGE,"Rendering the SDK relocatable")
 	$(TOPDIR)/support/scripts/fix-rpath host
 	$(TOPDIR)/support/scripts/fix-rpath staging
@@ -594,17 +593,6 @@ prepare-sdk: world
 	mkdir -p $(HOST_DIR)/share/buildroot
 	echo $(HOST_DIR) > $(HOST_DIR)/share/buildroot/sdk-location

-BR2_SDK_PREFIX ?= $(GNU_TARGET_NAME)_sdk-buildroot
-.PHONY: sdk
-sdk: prepare-sdk $(BR2_TAR_HOST_DEPENDENCY)
-	@$(call MESSAGE,"Generating SDK tarball")
-	$(if $(BR2_SDK_PREFIX),,$(error BR2_SDK_PREFIX can not be empty))
-	$(Q)mkdir -p $(BINARIES_DIR)
-	$(TAR) czf "$(BINARIES_DIR)/$(BR2_SDK_PREFIX).tar.gz" \
-		--owner=0 --group=0 --numeric-owner \
-		--transform='s#^\.#$(BR2_SDK_PREFIX)#' \
-		-C $(HOST_DIR) "."
-
 # Populating the staging with the base directories is handled by the skeleton package
 $(STAGING_DIR):
 	@mkdir -p $(STAGING_DIR)
@@ -803,10 +791,10 @@ legal-info-clean:
 .PHONY: legal-info-prepare
 legal-info-prepare: $(LEGAL_INFO_DIR)
 	@$(call MESSAGE,"Buildroot $(BR2_VERSION_FULL) Collecting legal info")
-	@$(call legal-license-file,buildroot,buildroot,support/legal-info/buildroot.hash,COPYING,COPYING,HOST)
-	@$(call legal-manifest,TARGET,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,SOURCE SITE,DEPENDENCIES WITH LICENSES)
-	@$(call legal-manifest,HOST,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,SOURCE SITE,DEPENDENCIES WITH LICENSES)
-	@$(call legal-manifest,HOST,buildroot,$(BR2_VERSION_FULL),GPL-2.0+,COPYING,not saved,not saved)
+	@$(call legal-license-file,buildroot,buildroot,support/legal-info,COPYING,COPYING,HOST)
+	@$(call legal-manifest,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,SOURCE SITE,TARGET)
+	@$(call legal-manifest,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,SOURCE SITE,HOST)
+	@$(call legal-manifest,buildroot,$(BR2_VERSION_FULL),GPL-2.0+,COPYING,not saved,not saved,HOST)
 	@$(call legal-warning,the Buildroot source code has not been saved)
 	@cp $(BR2_CONFIG) $(LEGAL_INFO_DIR)/buildroot.config

@@ -945,7 +933,7 @@ randpackageconfig allyespackageconfig allnopackageconfig: $(BUILD_DIR)/buildroot
 	@rm -f $(CONFIG_DIR)/.config.nopkg
 	@$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN) >/dev/null

-oldconfig syncconfig olddefconfig: $(BUILD_DIR)/buildroot-config/conf prepare-kconfig
+oldconfig silentoldconfig olddefconfig: $(BUILD_DIR)/buildroot-config/conf prepare-kconfig
 	@$(COMMON_CONFIG_ENV) $< --$@ $(CONFIG_CONFIG_IN)

 defconfig: $(BUILD_DIR)/buildroot-config/conf prepare-kconfig
@@ -1041,8 +1029,8 @@ help:
 	@echo '  xconfig                - interactive Qt-based configurator'
 	@echo '  gconfig                - interactive GTK-based configurator'
 	@echo '  oldconfig              - resolve any unresolved symbols in .config'
-	@echo '  syncconfig             - Same as oldconfig, but quietly, additionally update deps'
-	@echo '  olddefconfig           - Same as syncconfig but sets new symbols to their default value'
+	@echo '  silentoldconfig        - Same as oldconfig, but quietly, additionally update deps'
+	@echo '  olddefconfig           - Same as silentoldconfig but sets new symbols to their default value'
 	@echo '  randconfig             - New config with random answer to all options'
 	@echo '  defconfig              - New config with default answer to all options;'
 	@echo '                             BR2_DEFCONFIG, if set on the command line, is used as input'
@@ -1149,15 +1137,11 @@ release:
 print-version:
 	@echo $(BR2_VERSION_FULL)

-check-package:
-	find $(TOPDIR) -type f \( -name '*.mk' -o -name '*.hash' -o -name 'Config.*' \) \
-		-exec ./utils/check-package {} +
-
 .PHONY: .gitlab-ci.yml
 .gitlab-ci.yml: .gitlab-ci.yml.in
 	cp $< $@
 	(cd configs; LC_ALL=C ls -1 *_defconfig) | sed 's/$$/: *defconfig/' >> $@
-	set -o pipefail; ./support/testing/run-tests -l 2>&1 | sed -r -e '/^test_run \((.*)\).*/!d; s//\1: *runtime_test/' | LC_ALL=C sort >> $@
+	./support/testing/run-tests -l 2>&1 | sed -r -e '/^test_run \((.*)\).*/!d; s//\1: *runtime_test/' | LC_ALL=C sort >> $@

 include docs/manual/manual.mk
 -include $(foreach dir,$(BR2_EXTERNAL_DIRS),$(sort $(wildcard $(dir)/docs/*/*.mk)))
@@ -198,17 +198,6 @@ config BR2_powerpc64le
 	  http://www.power.org/
 	  http://en.wikipedia.org/wiki/Powerpc

-config BR2_riscv
-	bool "RISCV"
-	select BR2_ARCH_HAS_MMU_MANDATORY
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_7
-	help
-	  RISC-V is an open, free Instruction Set Architecture created
-	  by the UC Berkeley Architecture Research group and supported
-	  and promoted by RISC-V Foundation.
-	  https://riscv.org/
-	  https://en.wikipedia.org/wiki/RISC-V
-
 config BR2_sh
 	bool "SuperH"
 	select BR2_ARCH_HAS_MMU_OPTIONAL
@@ -317,6 +306,9 @@ config BR2_GCC_TARGET_FP32_MODE
 config BR2_GCC_TARGET_CPU
 	string

+config BR2_GCC_TARGET_CPU_REVISION
+	string
+
 # The value of this option will be passed as --with-fpu=<value> when
 # building gcc (internal backend) or -mfpu=<value> in the toolchain
 # wrapper (external toolchain)
@@ -431,10 +423,6 @@ if BR2_powerpc || BR2_powerpc64 || BR2_powerpc64le
 source "arch/Config.in.powerpc"
 endif

-if BR2_riscv
-source "arch/Config.in.riscv"
-endif
-
 if BR2_sh
 source "arch/Config.in.sh"
 endif
@@ -376,19 +376,25 @@ config BR2_exynos_m1
 	select BR2_ARM_CPU_ARMV8A
 	select BR2_ARCH_HAS_MMU_OPTIONAL
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_5
-if BR2_ARCH_IS_64
 config BR2_falkor
 	bool "falkor"
+	select BR2_ARM_CPU_HAS_ARM if !BR2_ARCH_IS_64
+	select BR2_ARM_CPU_HAS_NEON if !BR2_ARCH_IS_64
+	select BR2_ARM_CPU_HAS_THUMB2 if !BR2_ARCH_IS_64
 	select BR2_ARM_CPU_HAS_FP_ARMV8
 	select BR2_ARM_CPU_ARMV8A
 	select BR2_ARCH_HAS_MMU_OPTIONAL
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_7
 config BR2_qdf24xx
 	bool "qdf24xx"
+	select BR2_ARM_CPU_HAS_ARM if !BR2_ARCH_IS_64
+	select BR2_ARM_CPU_HAS_NEON if !BR2_ARCH_IS_64
+	select BR2_ARM_CPU_HAS_THUMB2 if !BR2_ARCH_IS_64
 	select BR2_ARM_CPU_HAS_FP_ARMV8
 	select BR2_ARM_CPU_ARMV8A
 	select BR2_ARCH_HAS_MMU_OPTIONAL
 	select BR2_ARCH_NEEDS_GCC_AT_LEAST_6
+if BR2_ARCH_IS_64
 config BR2_thunderx
 	bool "thunderx"
 	select BR2_ARM_CPU_HAS_FP_ARMV8
@@ -1,102 +0,0 @@
-# RISC-V CPU ISA extensions.
-
-config BR2_RISCV_ISA_RVI
-	bool
-
-config BR2_RISCV_ISA_RVM
-	bool
-
-config BR2_RISCV_ISA_RVA
-	bool
-
-config BR2_RISCV_ISA_RVF
-	bool
-
-config BR2_RISCV_ISA_RVD
-	bool
-
-config BR2_RISCV_ISA_RVC
-	bool
-
-choice
-	prompt "Target Architecture Variant"
-	default BR2_riscv_g
-
-config BR2_riscv_g
-	bool "General purpose (G)"
-	select BR2_RISCV_ISA_RVI
-	select BR2_RISCV_ISA_RVM
-	select BR2_RISCV_ISA_RVA
-	select BR2_RISCV_ISA_RVF
-	select BR2_RISCV_ISA_RVD
-	help
-	  General purpose (G) is equivalent to IMAFD.
-
-config BR2_riscv_custom
-	bool "Custom architecture"
-	select BR2_RISCV_ISA_RVI
-	select BR2_RISCV_ISA_CUSTOM_RVA
-
-endchoice
-
-if BR2_riscv_custom
-
-comment "Instruction Set Extensions"
-
-config BR2_RISCV_ISA_CUSTOM_RVM
-	bool "Integer Multiplication and Division (M)"
-	select BR2_RISCV_ISA_RVM
-
-config BR2_RISCV_ISA_CUSTOM_RVA
-	bool "Atomic Instructions (A)"
-	select BR2_RISCV_ISA_RVA
-
-config BR2_RISCV_ISA_CUSTOM_RVF
-	bool "Single-precision Floating-point (F)"
-	select BR2_RISCV_ISA_RVF
-
-config BR2_RISCV_ISA_CUSTOM_RVD
-	bool "Double-precision Floating-point (D)"
-	depends on BR2_RISCV_ISA_RVF
-	select BR2_RISCV_ISA_RVD
-
-config BR2_RISCV_ISA_CUSTOM_RVC
-	bool "Compressed Instructions (C)"
-	select BR2_RISCV_ISA_RVC
-endif
-
-config BR2_RISCV_64
-	bool
-	default y
-	select BR2_ARCH_IS_64
-
-choice
-	prompt "Target ABI"
-	default BR2_RISCV_ABI_LP64
-
-config BR2_RISCV_ABI_LP64
-	bool "lp64"
-	depends on BR2_ARCH_IS_64
-
-config BR2_RISCV_ABI_LP64F
-	bool "lp64f"
-	depends on BR2_ARCH_IS_64 && BR2_RISCV_ISA_RVF
-
-config BR2_RISCV_ABI_LP64D
-	bool "lp64d"
-	depends on BR2_ARCH_IS_64 && BR2_RISCV_ISA_RVD
-endchoice
-
-config BR2_ARCH
-	default "riscv64" if BR2_ARCH_IS_64
-
-config BR2_ENDIAN
-	default "LITTLE"
-
-config BR2_GCC_TARGET_ABI
-	default "lp64" if BR2_RISCV_ABI_LP64
-	default "lp64f" if BR2_RISCV_ABI_LP64F
-	default "lp64d" if BR2_RISCV_ABI_LP64D
-
-config BR2_READELF_ARCH_NAME
-	default "RISC-V"
@@ -1,22 +0,0 @@
-################################################################################
-#
-# Architecture-specific definitions
-#
-################################################################################
-
-# Allow GCC target configuration settings to be optionally
-# overwritten by architecture specific makefiles.
-
-# Makefiles must use the GCC_TARGET_* variables below instead
-# of the BR2_GCC_TARGET_* versions.
-GCC_TARGET_ARCH := $(call qstrip,$(BR2_GCC_TARGET_ARCH))
-GCC_TARGET_ABI := $(call qstrip,$(BR2_GCC_TARGET_ABI))
-GCC_TARGET_NAN := $(call qstrip,$(BR2_GCC_TARGET_NAN))
-GCC_TARGET_FP32_MODE := $(call qstrip,$(BR2_GCC_TARGET_FP32_MODE))
-GCC_TARGET_CPU := $(call qstrip,$(BR2_GCC_TARGET_CPU))
-GCC_TARGET_FPU := $(call qstrip,$(BR2_GCC_TARGET_FPU))
-GCC_TARGET_FLOAT_ABI := $(call qstrip,$(BR2_GCC_TARGET_FLOAT_ABI))
-GCC_TARGET_MODE := $(call qstrip,$(BR2_GCC_TARGET_MODE))
-
-# Include any architecture specific makefiles.
-include $(sort $(wildcard arch/arch.mk.*))
@@ -1,28 +0,0 @@
-#
-# Configure the GCC_TARGET_ARCH variable and append the
-# appropriate RISC-V ISA extensions.
-#
-
-ifeq ($(BR2_riscv),y)
-
-ifeq ($(BR2_ARCH_IS_64),y)
-GCC_TARGET_ARCH := rv64i
-endif
-
-ifeq ($(BR2_RISCV_ISA_RVM),y)
-GCC_TARGET_ARCH := $(GCC_TARGET_ARCH)m
-endif
-ifeq ($(BR2_RISCV_ISA_RVA),y)
-GCC_TARGET_ARCH := $(GCC_TARGET_ARCH)a
-endif
-ifeq ($(BR2_RISCV_ISA_RVF),y)
-GCC_TARGET_ARCH := $(GCC_TARGET_ARCH)f
-endif
-ifeq ($(BR2_RISCV_ISA_RVD),y)
-GCC_TARGET_ARCH := $(GCC_TARGET_ARCH)d
-endif
-ifeq ($(BR2_RISCV_ISA_RVC),y)
-GCC_TARGET_ARCH := $(GCC_TARGET_ARCH)c
-endif
-
-endif
@@ -1,4 +0,0 @@
-label linux-4.17.0-rc3
-  kernel /Image
-  devicetree /sun50i-a64-amarula-relic.dtb
-  append console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p4 rootwait
@@ -1,10 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"Image",
-			"sun50i-a64-amarula-relic.dtb",
-			"extlinux"
-		}
-	}
-	size = 64M
-}
@@ -1,4 +0,0 @@
-#!/bin/sh
-BOARD_DIR="$(dirname $0)"
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
@@ -1,90 +0,0 @@
-Amarula A64 Relic
-================
-
-Amarula A64-Relic is an Allwinner A64 based IoT device, which supports:
- Allwinner A64 Cortex-A53
- Mali-400MP2 GPU
- AXP803 PMIC
- 1GB DDR3 RAM
- 8GB eMMC
- AP6330 Wifi/BLE
- MIPI-DSI
- CSI: OV5640 sensor
- USB OTG
- 12V DC power supply
-
-Wiki link:
-https://openedev.amarulasolutions.com/display/ODWIKI/Amarual+A64-Relic
-
-Build
-=====
-
-  $ make amarula_a64_relic_defconfig
-
-  $ make
-
-build files at output/images/:
-  - sunxi-spl.bin
-  - u-boot.itb
-  - Image
-  - sun50i-a64-amarula-relic.dtb
-  - boot.vfat
-  - rootfs.ext4
-
-Write eMMC
-=========
-
-The board comes with an operating system preloaded on the eMMC.
-To replace it with the Buildroot-built system, take the following
-steps
-
-1. Connect the board UART with host and open minicom(ttyUSBx/115200N8)
-
-2. Supply 12V DC for power-on the board.
-
-3. Interrupt U-Boot by pressing enter
-
-4. Create GPT partitions
-  => mmc dev 1
-  => gpt write mmc 1 $partitions
-
-5. Connect the board USB-OTG with USB slot on the host.
-
-6. Initiate fastboot
-  => fastboot 0
-
-7. Write images from host onto eMMC using fastboot
-  $ cd output/images
-  $ sudo fastboot -i 0x1f3a flash loader1 sunxi-spl.bin
-  $ sudo fastboot -i 0x1f3a flash loader2 u-boot.itb
-  $ sudo fastboot -i 0x1f3a flash esp boot.vfat
-  $ sudo fastboot -i 0x1f3a flash system rootfs.ext4
-
-Update eMMC during Development
-==============================
-
-During development, reflashing the entire filesystem image at every
-change is time consuming. A useful alternative is to directly access
-over USB the filesystem stored on the eMMC, using the USB Mass Storage
-capability of U-Boot. To achieve this:
-
-1. Build U-Boot by enabling UMS
-   $ make uboot-menuconfig
-   (select CONFIG_CMD_USB_MASS_STORAGE=y)
-
-2. Follow all 6 steps from 'Write eMMC' and mount eMMC on host
-    => mmc dev 1
-    => ums 0 mmc 1
-
-WiFi
-====
-
- # wpa_passphrase ACCESSPOINTNAME >> /etc/wpa_supplicant.conf
-   (type password and enter)
- # wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf -B
- # udhcpc -i wlan0
- # ping google.com
-
--
-Jagan Teki <jagan@amarulasolutions.com>
-29-Jun-2018
@@ -1,83 +0,0 @@
-#AP6330_NVRAM_V1.0_20121130
-#Sample variables file for BCM94330 SD FC AGB board
-manfid=0x2d0
-prodid=0x0547
-vendid=0x14e4
-devid=0x4360
-boardtype=0x05e1
-boardrev=0x1202
-boardflags=0x0080200
-nocrc=1
-xtalfreq=26000
-boardnum=22
-macaddr=00:90:4c:c5:12:38
-ag0=254
-aa2g=1
-ccode=ALL
-pa0itssit=0x20
-pa0b0=5587
-pa0b1=-633
-pa0b2=-158
-rssismf2g=0xa
-rssismc2g=0x3
-rssisav2g=0x7
-#rssi params for 5GHz
-rssismf5g=0x4
-rssismc5g=0x3
-rssisav5g=0x7
-#PA parameters for lower a-band
-pa1lob0=4748
-pa1lob1=-566
-pa1lob2=-180
-#PA parameters for midband
-pa1b0=4762
-pa1b1=-593
-pa1b2=-172
-#PA parameters for high band
-#pa1hib0=4596
-pa1hib0=4666
-pa1hib1=-619
-pa1hib2=-163
-rxpo5g=0
-maxp2ga0=74
-maxp5ga0=66
-maxp5gla0=66
-maxp5gha0=66
-# 2.4G Tx Power offsets
-cck2gpo=0x2222
-ofdm2gpo=0x44444444
-mcs2gpo0=0x6666
-mcs2gpo1=0x6666
-# 5G Tx Power offsets
-ofdm5gpo=0x44444444
-ofdm5glpo=0x44444444
-ofdm5ghpo=0x44444444
-mcs5gpo0=0x6666
-mcs5gpo1=0x6666
-mcs5glpo0=0x6666
-mcs5glpo1=0x6666
-mcs5ghpo0=0x6666
-mcs5ghpo1=0x6666
-sromrev=3
-il0macaddr=00:90:4c:c5:12:38
-wl0id=0x431b
-cckPwrOffset=4
-swctrlmap_2g=0x44844484,0x42824282,0x40804484,0x18282,0x1ff
-triso5g=0
-swctrlmap_5g=0x00100010,0x20202020,0x20202020,0x14202,0x0f0
-rfreg033=0x19
-rfreg033_cck=0x1f
-dacrate2g=160
-dacrate5g=160
-txalpfbyp2g=1
-bphyscale=17
-cckPwrIdxCorr=-15
-pacalidx2g=50
-#pacalidx5g=20
-noise_cal_ref_2g=53
-noise_cal_po_2g=0
-noise_cal_ref_5g=52
-noise_cal_po_5g=5,0,0
-# 4330 OOB parameter: High level trigger
-muxenab=0x10
-
@@ -1,7 +0,0 @@
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-mmc dev 0
-fatload mmc 0 $kernel_addr_r zImage
-fatload mmc 0 $fdt_addr_r sun8i-r40-bananapi-m2-ultra.dtb
-
-bootz $kernel_addr_r - $fdt_addr_r
@@ -1,33 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"sun8i-r40-bananapi-m2-ultra.dtb",
-			"boot.scr"
-		}
-	}
-	size = 64M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot-sunxi-with-spl.bin"
-		offset = 8192
-		size = 1040384 # 1MB - 8192
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
@@ -1,35 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Bananapi M2 ULtra. With the current
-configuration it will bring-up the board, and allow access through the
-serial console.
-
-Bananapi M2 Ultra link:
-http://www.banana-pi.org/m2u.html
-
-This configuration uses U-Boot mainline and kernel mainline.
-
-How to build
-============
-
-    $ make bananapi_m2_ultra_defconfig
-    $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
-  $ sudo sync
-
-Insert the micro SDcard in your Bananapi M2 Ultra and power it up. The console
-is on the serial line, 115200 8N1.
@@ -1,66 +0,0 @@
-From b3a1e97498e7987073775d49a703932c20f2df1d Mon Sep 17 00:00:00 2001
-From: Ezequiel Garcia <ezequiel@collabora.com>
-Date: Mon, 12 Nov 2018 14:04:46 -0300
-Subject: [PATCH] mips: Remove default endiannes
-
-Currently, trying to build ci20_mmc fails on little-endian
-toolchains. The problem seems to be that some targets don't
-have CONFIG_SYS_LITTLE_ENDIAN properly set, and therefore
-the default -EB switch is selected.
-
-Let's get rid of the default switch entirely, and fix this problem.
-While this may be a hack, it is a quick solution until
-U-Boot gets CI20 proper support.
-
-make ARCH=mips CROSS_COMPILE=mips-linux-gnu- ci20_mmc
-Configuring for ci20_mmc - Board: ci20, Options: SPL_MMC_SUPPORT,ENV_IS_IN_MMC
-make
-make[1]: Entering directory '/home/zeta/repos/u-boot-ci20'
-Generating include/autoconf.mk
-Generating include/autoconf.mk.dep
-mips-linux-gnu-gcc: error: may not use both -EB and -EL
-mips-linux-gnu-gcc: error: may not use both -EB and -EL
-Generating include/spl-autoconf.mk
-mips-linux-gnu-gcc: error: may not use both -EB and -EL
-Generating include/tpl-autoconf.mk
-mips-linux-gnu-gcc: error: may not use both -EB and -EL
-mips-linux-gnu-gcc -DDO_DEPS_ONLY \
-	-g  -Os   -ffunction-sections -fdata-sections -D__KERNEL__ -I/home/zeta/repos/u-boot-ci20/include -fno-builtin -ffreestanding -nostdinc -isystem /home/zeta/repos/buildroot/mips/output/host/opt/ext-toolchain/bin/../lib/gcc/mips-linux-gnu/5.3.0/include -pipe  -DCONFIG_MIPS -D__MIPS__ -G 0 -EB -msoft-float -fpic -mabicalls -march=mips32 -mabi=32 -DCONFIG_32BIT -mno-branch-likely -Wall -Wstrict-prototypes       \
-	-o lib/asm-offsets.s lib/asm-offsets.c -c -S
-if [ -f arch/mips/cpu/xburst/jz4780/asm-offsets.c ];then \
-	mips-linux-gnu-gcc -DDO_DEPS_ONLY \
-	-g  -Os   -ffunction-sections -fdata-sections -D__KERNEL__ -I/home/zeta/repos/u-boot-ci20/include -fno-builtin -ffreestanding -nostdinc -isystem /home/zeta/repos/buildroot/mips/output/host/opt/ext-toolchain/bin/../lib/gcc/mips-linux-gnu/5.3.0/include -pipe  -DCONFIG_MIPS -D__MIPS__ -G 0 -EB -msoft-float -fpic -mabicalls -march=mips32 -mabi=32 -DCONFIG_32BIT -mno-branch-likely -Wall -Wstrict-prototypes       \
-		-o arch/mips/cpu/xburst/jz4780/asm-offsets.s arch/mips/cpu/xburst/jz4780/asm-offsets.c -c -S; \
-else \
-	touch arch/mips/cpu/xburst/jz4780/asm-offsets.s; \
-fi
-mips-linux-gnu-gcc: error: may not use both -EB and -EL
-make[1]: *** [Makefile:747: lib/asm-offsets.s] Error 1
-make[1]: *** Waiting for unfinished jobs....
-make[1]: Leaving directory '/home/zeta/repos/u-boot-ci20'
-make: *** [.boards.depend:463: ci20_mmc] Error 2
-
-Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
---
-https://github.com/MIPS/CI20_u-boot/pull/19
-
- arch/mips/config.mk | 3 ---
- 1 file changed, 3 deletions(-)
-
-diff --git a/arch/mips/config.mk b/arch/mips/config.mk
-index c89279025507..43560abbc0e1 100644
--- a/arch/mips/config.mk
-+++ b/arch/mips/config.mk
-@@ -20,9 +20,6 @@ ifdef CONFIG_SYS_BIG_ENDIAN
- ENDIANNESS := -EB
- endif
- 
-# Default to EB if no endianess is configured
-ENDIANNESS ?= -EB
-
- PLATFORM_CPPFLAGS += -DCONFIG_MIPS -D__MIPS__
- 
- #
-- 
-2.19.1
-
@@ -1,17 +0,0 @@
-image sdcard.img {
-    hdimage {
-    }
-
-    partition u-boot {
-        in-partition-table = "no"
-        image = "u-boot.imx"
-        offset = 1024
-    }
-
-    partition rootfs {
-        partition-type = 0x83
-        image = "rootfs.ext2"
-        offset = 1M
-        size = 60M
-    }
-}
@@ -1,38 +0,0 @@
-Buildroot for Embest RIoTboard
-==============================
-
-This is a small development board, based on Freescale IMX6 Solo SoC
-(single core ARM Cortex-A9).
-
-More details about the board can be found at:
-
-  http://www.embest-tech.com/riotboard
-
-1. Compiling buildroot
----------------------
-
-$ make riotboard_defconfig
-$ make
-
-2. Installing buildroot
-----------------------
-
-Prepare an SD-card and plug it into your card reader. Always double
-check the block device before writing to it, as writing to the wrong
-block device can cause irrecoverable data loss. Now you can write the
-image to your SD-card:
-
-sudo dd if=output/images/sdcard.img of=/dev/<sdcard-block-device> bs=1M
-
-3. Running buildroot
--------------------
-
-Position the board so you can read the label "RIoTboard" on the right
-side of SW1 DIP switches. Configure the SW1 swiches like this:
-
-1   0  1   0   0  1   0  1
-ON OFF ON OFF OFF ON OFF ON
-
-Now plug your prepared SD-card in slot J6. Connect a serial console
-(115200, 8, N, 1) to header J18. Connect a 5V/1A power supply to the
-board and enjoy.
@@ -1,6 +0,0 @@
-default buildroot
-
-label buildroot
-kernel /boot/zImage
-devicetree /boot/imx6dl-riotboard.dtb
-append console=ttymxc1,115200 root=/dev/mmcblk1p1 rw
@@ -3,7 +3,7 @@
 # We mimic the .sdcard Freescale's image format:
 # * the SD card must have 33 kB free space at the beginning,
 # * U-Boot is integrated into imx8-boot-sd.bin and is dumped as is,
-# * a FAT partition at offset 8MB is containing Image and DTB files
+# * a FAT partition at offset 32MB is containing Image and DTB files
 # * a single root filesystem partition is required (ext2, ext3 or ext4)
 #

@@ -1,89 +0,0 @@
-From 27a2cd6a1980adf3002412678c8fdec6528dc47d Mon Sep 17 00:00:00 2001
-From: Trent Piepho <tpiepho@impinj.com>
-Date: Fri, 6 Apr 2018 17:11:27 -0700
-Subject: [PATCH] imx: Create distinct pre-processed mkimage config files
-
-Each imx image is created by a separate sub-make and during this process
-the mkimage config file is run though cpp.
-
-The cpp output is to the same file no matter what imx image is being
-created.
-
-This means if two imx images are generated in parallel they will attempt
-to independently produce the same pre-processed mkimage config file at
-the same time.
-
-Avoid the problem by making the pre-processed config file name unique
-based on the imx image it will be used in.  This way each image will
-create a unique config file and they won't clobber each other when run
-in parallel.
-
-This should fixed the build bug referenced in b5b0e4e3 ("imximage:
-Remove failure when no IVT offset is found").
-
-Cc: Breno Lima <breno.lima@nxp.com>
-Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
-Cc: Fabio Estevam <fabio.estevam@nxp.com>
-Signed-off-by: Trent Piepho <tpiepho@impinj.com>
-Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
-[fabio: Adapted to imx_v2017.03_4.9.11_1.0.0_ga]
-Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
- arch/arm/imx-common/Makefile | 15 ++++++++-------
- 1 file changed, 8 insertions(+), 7 deletions(-)
-
-diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
-index d862258..f1bae8d 100644
--- a/arch/arm/imx-common/Makefile
-+++ b/arch/arm/imx-common/Makefile
-@@ -69,9 +69,11 @@ endif
- quiet_cmd_cpp_cfg = CFGS    $@
-       cmd_cpp_cfg = $(CPP) $(cpp_flags) -x c -o $@ $<
- 
-IMX_CONFIG = $(CONFIG_IMX_CONFIG:"%"=%).cfgtmp
-+# mkimage source config file
-+IMX_CONFIG = $(CONFIG_IMX_CONFIG:"%"=%)
- 
-$(IMX_CONFIG): %.cfgtmp: % FORCE
-+# How to create a cpp processed config file, they all use the same source
-+%.cfgout: $(IMX_CONFIG) FORCE
- 	$(Q)mkdir -p $(dir $@)
- 	$(call if_changed_dep,cpp_cfg)
- 
-@@ -79,7 +81,7 @@ MKIMAGEFLAGS_u-boot.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T imxim
- 	-e $(CONFIG_SYS_TEXT_BASE)
- u-boot.imx: MKIMAGEOUTPUT = u-boot.imx.log
- 
-u-boot.imx: u-boot.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
-+u-boot.imx: u-boot.bin u-boot.cfgout $(PLUGIN).bin FORCE
- 	$(call if_changed,mkimage)
- 
- ifeq ($(CONFIG_OF_SEPARATE),y)
-@@ -87,16 +89,15 @@ MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T i
- 	-e $(CONFIG_SYS_TEXT_BASE)
- u-boot-dtb.imx: MKIMAGEOUTPUT = u-boot-dtb.imx.log
- 
-u-boot-dtb.imx: u-boot-dtb.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
-+u-boot-dtb.imx: u-boot-dtb.bin u-boot-dtb.cfgout $(PLUGIN).bin FORCE
- 	$(call if_changed,mkimage)
- endif
- 
- MKIMAGEFLAGS_SPL = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T imximage \
- 	-e $(CONFIG_SPL_TEXT_BASE)
-
- SPL: MKIMAGEOUTPUT = SPL.log
- 
-SPL: spl/u-boot-spl.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
-+SPL: spl/u-boot-spl.bin spl/u-boot-spl.cfgout $(PLUGIN).bin FORCE
- 	$(call if_changed,mkimage)
- 
- MKIMAGEFLAGS_u-boot.uim = -A arm -O U-Boot -a $(CONFIG_SYS_TEXT_BASE) \
-@@ -124,4 +125,4 @@ cmd_u-boot-nand-spl_imx = (printf '\000\000\000\000\106\103\102\040\001' && \
- spl/u-boot-nand-spl.imx: SPL FORCE
- 	$(call if_changed,u-boot-nand-spl_imx)
- 
-targets += $(addprefix ../../../,$(IMX_CONFIG) SPL u-boot.uim spl/u-boot-nand-spl.imx)
-+targets += $(addprefix ../../../,SPL spl/u-boot-spl.cfgout u-boot-dtb.cfgout u-boot.cfgout u-boot.uim spl/u-boot-nand-spl.imx)
-- 
-2.7.4
-
@@ -0,0 +1,55 @@
+From 24ba28680abe868e8db3442a9bf523ad3af1febd Mon Sep 17 00:00:00 2001
+From: Fabio Estevam <fabio.estevam@nxp.com>
+Date: Fri, 9 Mar 2018 08:25:00 -0300
+Subject: [PATCH] imximage: Remove failure when no IVT offset is found
+
+Sometimes imximage throws the following error:
+
+  CFGS    board/freescale/vf610twr/imximage.cfg.cfgtmp
+  CFGS    board/freescale/vf610twr/imximage.cfg.cfgtmp
+  MKIMAGE u-boot-dtb.imx
+Error: No BOOT_FROM tag in board/freescale/vf610twr/imximage.cfg.cfgtmp
+arch/arm/mach-imx/Makefile:100: recipe for target 'u-boot-dtb.imx' failed
+
+Later on, when running mkimage for the u-boot.imx it will succeed in
+finding the IVT offset.
+
+Looks like some race condition happening during parallel build when
+processing mkimage for u-boot-dtb.imx and u-boot.imx.
+
+A proper fix still needs to be implemented, but as a workaround let's
+remove the error when the IVT offset is not found.
+
+It is useful to have such message, especially during bring-up phase,
+but the build error that it causes is severe, so better avoid the
+build error for now.
+
+The error checking can be re-implemented later when we have a proper
+fix.
+
+Reported-by: Breno Lima <breno.lima@nxp.com>
+Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
+Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
+---
+ tools/imximage.c | 5 -----
+ 1 file changed, 5 deletions(-)
+
+diff --git a/tools/imximage.c b/tools/imximage.c
+index 0c43196..bef56f8 100644
+--- a/tools/imximage.c
+++ b/tools/imximage.c
+@@ -765,11 +765,6 @@ static uint32_t parse_cfg_file(struct imx_header *imxhdr, char *name)
+ 	(*set_dcd_rst)(imxhdr, dcd_len, name, lineno);
+ 	fclose(fd);
+ 
+-	/* Exit if there is no BOOT_FROM field specifying the flash_offset */
+-	if (imximage_ivt_offset == FLASH_OFFSET_UNDEFINED) {
+-		fprintf(stderr, "Error: No BOOT_FROM tag in %s\n", name);
+-		exit(EXIT_FAILURE);
+-	}
+ 	return dcd_len;
+ }
+ 
+-- 
+2.7.4
+
@@ -1,89 +0,0 @@
-From 27a2cd6a1980adf3002412678c8fdec6528dc47d Mon Sep 17 00:00:00 2001
-From: Trent Piepho <tpiepho@impinj.com>
-Date: Fri, 6 Apr 2018 17:11:27 -0700
-Subject: [PATCH] imx: Create distinct pre-processed mkimage config files
-
-Each imx image is created by a separate sub-make and during this process
-the mkimage config file is run though cpp.
-
-The cpp output is to the same file no matter what imx image is being
-created.
-
-This means if two imx images are generated in parallel they will attempt
-to independently produce the same pre-processed mkimage config file at
-the same time.
-
-Avoid the problem by making the pre-processed config file name unique
-based on the imx image it will be used in.  This way each image will
-create a unique config file and they won't clobber each other when run
-in parallel.
-
-This should fixed the build bug referenced in b5b0e4e3 ("imximage:
-Remove failure when no IVT offset is found").
-
-Cc: Breno Lima <breno.lima@nxp.com>
-Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
-Cc: Fabio Estevam <fabio.estevam@nxp.com>
-Signed-off-by: Trent Piepho <tpiepho@impinj.com>
-Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
-[fabio: Adapted to imx_v2017.03_4.9.11_1.0.0_ga]
-Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
- arch/arm/imx-common/Makefile | 15 ++++++++-------
- 1 file changed, 8 insertions(+), 7 deletions(-)
-
-diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
-index d862258..f1bae8d 100644
--- a/arch/arm/imx-common/Makefile
-+++ b/arch/arm/imx-common/Makefile
-@@ -69,9 +69,11 @@ endif
- quiet_cmd_cpp_cfg = CFGS    $@
-       cmd_cpp_cfg = $(CPP) $(cpp_flags) -x c -o $@ $<
- 
-IMX_CONFIG = $(CONFIG_IMX_CONFIG:"%"=%).cfgtmp
-+# mkimage source config file
-+IMX_CONFIG = $(CONFIG_IMX_CONFIG:"%"=%)
- 
-$(IMX_CONFIG): %.cfgtmp: % FORCE
-+# How to create a cpp processed config file, they all use the same source
-+%.cfgout: $(IMX_CONFIG) FORCE
- 	$(Q)mkdir -p $(dir $@)
- 	$(call if_changed_dep,cpp_cfg)
- 
-@@ -79,7 +81,7 @@ MKIMAGEFLAGS_u-boot.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T imxim
- 	-e $(CONFIG_SYS_TEXT_BASE)
- u-boot.imx: MKIMAGEOUTPUT = u-boot.imx.log
- 
-u-boot.imx: u-boot.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
-+u-boot.imx: u-boot.bin u-boot.cfgout $(PLUGIN).bin FORCE
- 	$(call if_changed,mkimage)
- 
- ifeq ($(CONFIG_OF_SEPARATE),y)
-@@ -87,16 +89,15 @@ MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T i
- 	-e $(CONFIG_SYS_TEXT_BASE)
- u-boot-dtb.imx: MKIMAGEOUTPUT = u-boot-dtb.imx.log
- 
-u-boot-dtb.imx: u-boot-dtb.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
-+u-boot-dtb.imx: u-boot-dtb.bin u-boot-dtb.cfgout $(PLUGIN).bin FORCE
- 	$(call if_changed,mkimage)
- endif
- 
- MKIMAGEFLAGS_SPL = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T imximage \
- 	-e $(CONFIG_SPL_TEXT_BASE)
-
- SPL: MKIMAGEOUTPUT = SPL.log
- 
-SPL: spl/u-boot-spl.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
-+SPL: spl/u-boot-spl.bin spl/u-boot-spl.cfgout $(PLUGIN).bin FORCE
- 	$(call if_changed,mkimage)
- 
- MKIMAGEFLAGS_u-boot.uim = -A arm -O U-Boot -a $(CONFIG_SYS_TEXT_BASE) \
-@@ -124,4 +125,4 @@ cmd_u-boot-nand-spl_imx = (printf '\000\000\000\000\106\103\102\040\001' && \
- spl/u-boot-nand-spl.imx: SPL FORCE
- 	$(call if_changed,u-boot-nand-spl_imx)
- 
-targets += $(addprefix ../../../,$(IMX_CONFIG) SPL u-boot.uim spl/u-boot-nand-spl.imx)
-+targets += $(addprefix ../../../,SPL spl/u-boot-spl.cfgout u-boot-dtb.cfgout u-boot.cfgout u-boot.uim spl/u-boot-nand-spl.imx)
-- 
-2.7.4
-
@@ -21,7 +21,7 @@ You will find in output/images/ the following files:
  - boot.vfat
  - fsl-imx8mq-evk.dtb
  - Image
-  - imx8-boot-sd.bin
+  - imx-boot-imx8mqevk-sd.bin
  - lpddr4_pmu_train_fw.bin
  - rootfs.ext2
  - rootfs.ext4
@@ -69,7 +69,7 @@ Enable HDMI output

 To enable HDMI output at boot you must provide the video kernel boot
 argument.  To set the video boot argument from U-Boot run after
-stopping in U-Boot prompt:
+stoping in U-Boot prompt:

 setenv mmcargs 'setenv bootargs console=${console} root=${mmcroot} video=HDMI-A-1:1920x1080-32@60'
 saveenv
@@ -1,38 +0,0 @@
-ODROIDXU-UBOOT-CONFIG
-
-# U-Boot Parameters
-setenv initrd_high "0xffffffff"
-setenv fdt_high "0xffffffff"
-
-setenv macaddr "00:1e:06:61:7a:39"
-setenv bootrootfs "console=tty1 root=/dev/mmcblk1p2 rootwait rw fsck.repair=yes net.ifnames=0"
-setenv bootcmd "load mmc 0:1 0x40008000 zImage; load mmc 0:1 0x44000000 exynos5422-odroidxu4.dtb; bootz 0x40008000 - 0x44000000"
-setenv vout "hdmi"
-setenv governor "performance"
-setenv HPD "true"
-
-#  TMDS data amplitude control.
-setenv hdmi_tx_amp_lvl  "31"
-
-#  TMDS data amplitude fine control for each channel.
-setenv hdmi_tx_lvl_ch0      "3"
-setenv hdmi_tx_lvl_ch1      "3"
-setenv hdmi_tx_lvl_ch2      "3"
-
-#  TMDS data pre-emphasis level control.
-setenv hdmi_tx_emp_lvl      "6"
-
-#  TMDS clock amplitude control.
-setenv hdmi_clk_amp_lvl     "31"
-
-#  TMDS data source termination resistor control.
-setenv hdmi_tx_res      "0"
-
-setenv hdmi_phy_control "hdmi_tx_amp_lvl=${hdmi_tx_amp_lvl} hdmi_tx_lvl_ch0=${hdmi_tx_lvl_ch0} hdmi_tx_lvl_ch1=${hdmi_tx_lvl_ch1} hdmi_tx_lvl_ch2=${hdmi_tx_lvl_ch2} hdmi_tx_emp_lvl=${hdmi_tx_emp_lvl} hdmi_clk_amp_lvl=${hdmi_clk_amp_lvl} hdmi_tx_res=${hdmi_tx_res} HPD=${HPD} vout=${vout}"
-
-# final boot args
-setenv bootargs "${bootrootfs} ${videoconfig} smsc95xx.macaddr=${macaddr} governor=${governor} ${hdmi_phy_control}"
-
-# Boot the board
-boot
-
@@ -1,54 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"boot.ini",
-			"zImage",
-			"exynos5422-odroidxu4.dtb"
-		}
-	}
-	size = 32M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition bl1 {
-		in-partition-table = "no"
-		image = "bl1.bin.hardkernel"
-		offset = 512
-		size = 15360
-	}
-
-	partition bl2 {
-		in-partition-table = "no"
-		image = "bl2.bin.hardkernel.720k_uboot"
-		offset = 15872
-		size = 16384
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot-dtb.bin"
-		offset = 32256
-		size = 720k
-	}
-
-	partition tzsw {
-		in-partition-table = "no"
-		image = "tzsw.bin.hardkernel"
-		offset = 769536
-		size = 256k
-	}
-
-	partition vfat {
-		partition-type = 0xC
-		image = "boot.vfat"
-		offset = 2097152
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
@@ -1,24 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
-GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-
-cp ${BOARD_DIR}/boot.ini ${BINARIES_DIR}/
-
-# The bl1.bin.hardkernel file provided by the uboot hardkernel repository is overwritten
-# by the bl2.bin.hardkernel in the sd_fusing.sh script because it is too big.
-# In order to implement this in genimage, we need to truncate the bl1.bin file
-# so that it does not exceed the available place.
-# An issue has been filled about this: https://github.com/hardkernel/u-boot/issues/45
-truncate -s 15360 ${BINARIES_DIR}/bl1.bin.hardkernel
-
-rm -rf "${GENIMAGE_TMP}"
-
-genimage                           \
-	--rootpath "${TARGET_DIR}"     \
-	--tmppath "${GENIMAGE_TMP}"    \
-	--inputpath "${BINARIES_DIR}"  \
-	--outputpath "${BINARIES_DIR}" \
-	--config "${GENIMAGE_CFG}"
-
@@ -1,37 +0,0 @@
-Odroid XU-4 board with Samsung Exynos 5422 SoC
-
-How to build it
-===============
-
-  $ make odroidxu4_defconfig
-
-Then you can edit the build options using
-
-  $ make menuconfig
-
-Compile all and build rootfs image:
-
-  $ make
-
-Note: you will need to have access to the network, since Buildroot will
-download the packages' sources.
-
-Result of the build
-------------------
-
-After building, you should obtain all output files in output/images/
-
-
-How to write the SD card or eMMC
-================================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card or eMMC with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
-
-Insert the SDcard into your ODROID-XU4, and power it up. Your new system
-should come up now.
-
@@ -16,7 +16,7 @@ image flash.bin {
 	flashtype = "nor-16M-256"
 	partition uboot {
 		image = "u-boot.bin"
-		size = 256K
+		size = 320K
 	}
 	partition uimage {
 		image = "uImage.da850-lego-ev3"
@@ -16,7 +16,7 @@ The following defconfigs are available:
   for the A20-OLinuXino-MICRO board using mainline kernel
 - olimex_a20_olinuxino_lime_defconfig
   for the A20-OLinuXino-LIME board using mainline kernel
- - olimex_a20_olinuxino_lime_legacy_defconfig
+ - olimex_a20_olinuxino_lime_mali_defconfig
   for the A20-OLinuXino-LIME board using legacy linux-sunxi kernel
 - olimex_a20_olinuxino_lime2_defconfig
   for the A20-OLinuXino-LIME2 board using mainline kernel
@@ -51,7 +51,7 @@ After building, you should get a tree like this:
    output/images/
    +-- rootfs.ext2
    +-- rootfs.ext4 -> rootfs.ext2
-    +-- script.bin (lime_legacy)
+    +-- script.bin (lime_mali)
    +-- sdcard.img
    +-- sun7i-a20-olinuxino-lime.dtb (lime, mainline)
    +-- sun7i-a20-olinuxino-lime2.dtb (lime2, mainline)
@@ -82,4 +82,3 @@ CONFIG_EXT4_FS=y
 CONFIG_FUSE_FS=y
 CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_SQUASHFS=y
-CONFIG_UNWINDER_FRAME_POINTER=y
@@ -1,15 +0,0 @@
-#!/bin/sh
-
-set -e
-
-BOARD_DIR=$(dirname "$0")
-
-# Detect boot strategy, EFI or BIOS
-if [ -f "$BINARIES_DIR/efi-part/startup.nsh" ]; then
-    cp -f "$BOARD_DIR/grub-efi.cfg" "$BINARIES_DIR/efi-part/EFI/BOOT/grub.cfg"
-else
-    cp -f "$BOARD_DIR/grub-bios.cfg" "$TARGET_DIR/boot/grub/grub.cfg"
-
-    # Copy grub 1st stage to binaries, required for genimage
-    cp -f "$HOST_DIR/lib/grub/i387-pc/boot.img" "$BINARIES_DIR"
-fi
@@ -0,0 +1,14 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname $0)"
+
+# Detect boot strategy, EFI or BIOS
+if [ -f ${BINARIES_DIR}/efi-part/startup.nsh ]; then
+  cp -f ${BOARD_DIR}/grub-efi.cfg ${BINARIES_DIR}/efi-part/EFI/BOOT/grub.cfg
+else
+  cp -f ${BOARD_DIR}/grub-bios.cfg ${TARGET_DIR}/boot/grub/grub.cfg
+  # Copy grub 1st stage to binaries, required for genimage
+  cp -f ${HOST_DIR}/lib/grub/i386-pc/boot.img ${BINARIES_DIR}
+fi
+
+exit $?
@@ -1,6 +1,6 @@
 Run the emulation with:

-  qemu-system-aarch64 -M virt -cpu cortex-a53 -nographic -smp 1 -kernel output/images/Image -append "root=/dev/vda console=ttyAMA0" -netdev user,id=eth0 -device virtio-net-device,netdev=eth0 -drive file=output/images/rootfs.ext4,if=none,format=raw,id=hd0 -device virtio-blk-device,drive=hd0
+  qemu-system-aarch64 -M virt -cpu cortex-a57 -nographic -smp 1 -kernel output/images/Image -append "root=/dev/vda console=ttyAMA0" -netdev user,id=eth0 -device virtio-net-device,netdev=eth0 -drive file=output/images/rootfs.ext4,if=none,format=raw,id=hd0 -device virtio-blk-device,drive=hd0

 The login prompt will appear in the terminal that started Qemu.

@@ -1,23 +0,0 @@
-CONFIG_ARCH_RV64I=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=8
-CONFIG_PCI=y
-CONFIG_SYSVIPC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_WIRELESS is not set
-CONFIG_VIRTIO_BLK=y
-CONFIG_NETDEVICES=y
-CONFIG_VIRTIO_NET=y
-# CONFIG_ETHERNET is not set
-# CONFIG_WLAN is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_VIRT_DRIVERS=y
-CONFIG_VIRTIO_MMIO=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
@@ -1,7 +0,0 @@
-Run the emulation with:
-
-  qemu-system-riscv64 -M virt -kernel output/images/bbl -append "root=/dev/vda ro console=ttyS0" -drive file=output/images/rootfs.ext2,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 -netdev user,id=net0 -device virtio-net-device,netdev=net0 -nographic
-
-The login prompt will appear in the terminal that started Qemu.
-
-Tested with QEMU 2.12.1
@@ -1,5 +1,5 @@
 baudrate=115200
-bootargs=root=/dev/mmcblk0p2 rootwait
+bootargs=console=ttyS3,115200n8 root=/dev/mmcblk0p2 rootwait
 bootcmd=fatload mmc 0:1; bootm
 bootdelay=2
 bootfile=uImage
@@ -5,7 +5,7 @@
 # devicetree listed in the config.

 FIRST_DT=$(sed -nr \
-               -e 's|^BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/([-_/[:alnum:]\\.]*).*"$|\1|p' \
+               -e 's|^BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/([-_/[:alnum:]]*).*"$|\1|p' \
               ${BR2_CONFIG})

 [ -z "${FIRST_DT}" ] || ln -fs ${FIRST_DT}.dtb ${BINARIES_DIR}/system.dtb
@@ -13,11 +13,11 @@ source "boot/gummiboot/Config.in"
 source "boot/lpc32xxcdl/Config.in"
 source "boot/mv-ddr-marvell/Config.in"
 source "boot/mxs-bootlets/Config.in"
-source "boot/riscv-pk/Config.in"
 source "boot/s500-bootloader/Config.in"
 source "boot/syslinux/Config.in"
 source "boot/ts4800-mbrboot/Config.in"
 source "boot/uboot/Config.in"
 source "boot/vexpress-firmware/Config.in"
+source "boot/xloader/Config.in"

 endmenu
@@ -80,8 +80,8 @@ define ARM_TRUSTED_FIRMWARE_BL31_UBOOT_BUILD
 # Get the entry point address from the elf.
 	BASE_ADDR=$$($(TARGET_READELF) -h $(ARM_TRUSTED_FIRMWARE_IMG_DIR)/bl31/bl31.elf | \
 	             sed -r '/^  Entry point address:\s*(.*)/!d; s//\1/') && \
-	$(MKIMAGE) \
-		-A $(MKIMAGE_ARCH) -O arm-trusted-firmware -C none \
+	$(HOST_DIR)/bin/mkimage \
+		-A arm64 -O arm-trusted-firmware -C none \
 		-a $${BASE_ADDR} -e $${BASE_ADDR} \
 		-d $(ARM_TRUSTED_FIRMWARE_IMG_DIR)/bl31.bin \
 		$(ARM_TRUSTED_FIRMWARE_IMG_DIR)/atf-uboot.ub
@@ -96,8 +96,9 @@ endif

 define ARM_TRUSTED_FIRMWARE_BUILD_CMDS
 	$(ARM_TRUSTED_FIRMWARE_BUILD_FIPTOOL)
-	$(TARGET_MAKE_ENV) $(MAKE) -C $(@D) $(ARM_TRUSTED_FIRMWARE_MAKE_OPTS) \
-		$(ARM_TRUSTED_FIRMWARE_MAKE_TARGETS)
+	$(TARGET_CONFIGURE_OPTS) \
+		$(MAKE) -C $(@D) $(ARM_TRUSTED_FIRMWARE_MAKE_OPTS) \
+			$(ARM_TRUSTED_FIRMWARE_MAKE_TARGETS)
 	$(ARM_TRUSTED_FIRMWARE_BL31_UBOOT_BUILD)
 endef

@@ -12,7 +12,7 @@ choice
 	  Select the specific Barebox version you want to use

 config BR2_TARGET_BAREBOX_LATEST_VERSION
-	bool "2018.10.0"
+	bool "2017.09.0"

 config BR2_TARGET_BAREBOX_CUSTOM_VERSION
 	bool "Custom version"
@@ -40,7 +40,7 @@ endif

 config BR2_TARGET_BAREBOX_VERSION
 	string
-	default "2018.10.0"	if BR2_TARGET_BAREBOX_LATEST_VERSION
+	default "2017.09.0"	if BR2_TARGET_BAREBOX_LATEST_VERSION
 	default BR2_TARGET_BAREBOX_CUSTOM_VERSION_VALUE if BR2_TARGET_BAREBOX_CUSTOM_VERSION
 	default "custom"	if BR2_TARGET_BAREBOX_CUSTOM_TARBALL
 	default BR2_TARGET_BAREBOX_CUSTOM_GIT_VERSION if BR2_TARGET_BAREBOX_CUSTOM_GIT
@@ -1,5 +1,5 @@
-# http://www.barebox.org/download/barebox-2018.10.0.tar.bz2.md5
-md5 f4c89bc92903425c960aa41e997b2251 barebox-2018.10.0.tar.bz2
+# http://www.barebox.org/download/barebox-2017.09.0.tar.bz2.md5
+md5 b92e9c99cda7fbb61d01baf5679df261 barebox-2017.09.0.tar.bz2

 # Locally calculated
-sha256 c25bfeaff7dda8862defd8d9011e7e6d23216ee4fc4e8bb5b91a1efd833a6d1c barebox-2018.10.0.tar.bz2
+sha256 43283edc019f95a53fdb7d1b7c294afc4741bfcace348d6beeded5fe5147a81b barebox-2017.09.0.tar.bz2
@@ -28,7 +28,7 @@ $(1)_SITE_METHOD = git
 else
 # Handle stable official Barebox versions
 $(1)_SOURCE = barebox-$$($(1)_VERSION).tar.bz2
-$(1)_SITE = https://www.barebox.org/download
+$(1)_SITE = http://www.barebox.org/download
 endif

 $(1)_DEPENDENCIES = host-lzop
@@ -26,7 +26,7 @@ endchoice

 config BR2_TARGET_BINARIES_MARVELL_IMAGE
 	string
-	default "mrvl_scp_bl2_mss_ap_cp1_a8040.img" if BR2_TARGET_BINARIES_MARVELL_8040
-	default "mrvl_scp_bl2_mss_ap_cp1_a7040.img" if BR2_TARGET_BINARIES_MARVELL_7040
+	default "mrvl_scp_bl2_8040.img" if BR2_TARGET_BINARIES_MARVELL_8040
+	default "mrvl_scp_bl2_7040.img" if BR2_TARGET_BINARIES_MARVELL_7040

 endif
@@ -1,3 +1,3 @@
 # Locally calculated
-sha256 45c348d7a62fd147e7c6a59211a77876ce5dd26de690bd45ab79c8ff891acedf binaries-marvell-14481806e699dcc6f7025dbe3e46cf26bb787791.tar.gz
-sha256 509a36bb6faa106bbc9730c23038a361ee0c860e53a4cdf9e8605c0174fe45f7	README.md
+sha256 7c41cddc2ce46038b630b59d2e9e50e903d27032bcfbf38019eaed14fcfdbe40 binaries-marvell-a8ac27b7884ed2c1efcf9f3326de3e0ed7b94e91.tar.gz
+sha256 d8560ab4ea4042a55eee6857ded1d7e4bca2d9120b8c7a86d2a7fdc4ba4994e0	README.md
@@ -4,8 +4,7 @@
 #
 ################################################################################

-# This is version binaries-marvell-armada-18.06
-BINARIES_MARVELL_VERSION = 14481806e699dcc6f7025dbe3e46cf26bb787791
+BINARIES_MARVELL_VERSION = a8ac27b7884ed2c1efcf9f3326de3e0ed7b94e91
 BINARIES_MARVELL_SITE = $(call github,MarvellEmbeddedProcessors,binaries-marvell,$(BINARIES_MARVELL_VERSION))

 BINARIES_MARVELL_LICENSE = GPL-2.0 with freertos-exception-2.0
@@ -1,74 +0,0 @@
-From 842c390469e2c2e10b5aa36700324cd3bde25875 Mon Sep 17 00:00:00 2001
-From: "H.J. Lu" <hjl.tools@gmail.com>
-Date: Sat, 17 Feb 2018 06:47:28 -0800
-Subject: [PATCH] x86-64: Treat R_X86_64_PLT32 as R_X86_64_PC32
-
-Starting from binutils commit bd7ab16b4537788ad53521c45469a1bdae84ad4a:
-
-https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=bd7ab16b4537788ad53521c45469a1bdae84ad4a
-
-x86-64 assembler generates R_X86_64_PLT32, instead of R_X86_64_PC32, for
-32-bit PC-relative branches.  Grub2 should treat R_X86_64_PLT32 as
-R_X86_64_PC32.
-
-Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
-Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
-Signed-off-by: Romain Naour <romain.naour@smile.fr>
---
- grub-core/efiemu/i386/loadcore64.c | 1 +
- grub-core/kern/x86_64/dl.c         | 1 +
- util/grub-mkimagexx.c              | 1 +
- util/grub-module-verifier.c        | 1 +
- 4 files changed, 4 insertions(+)
-
-diff --git a/grub-core/efiemu/i386/loadcore64.c b/grub-core/efiemu/i386/loadcore64.c
-index e49d0b6..18facf4 100644
--- a/grub-core/efiemu/i386/loadcore64.c
-+++ b/grub-core/efiemu/i386/loadcore64.c
-@@ -98,6 +98,7 @@ grub_arch_efiemu_relocate_symbols64 (grub_efiemu_segment_t segs,
- 		    break;
- 
- 		  case R_X86_64_PC32:
-+		  case R_X86_64_PLT32:
- 		    err = grub_efiemu_write_value (addr,
- 						   *addr32 + rel->r_addend
- 						   + sym.off
-diff --git a/grub-core/kern/x86_64/dl.c b/grub-core/kern/x86_64/dl.c
-index 4406906..3a73e6e 100644
--- a/grub-core/kern/x86_64/dl.c
-+++ b/grub-core/kern/x86_64/dl.c
-@@ -70,6 +70,7 @@ grub_arch_dl_relocate_symbols (grub_dl_t mod, void *ehdr,
- 	  break;
- 
- 	case R_X86_64_PC32:
-+	case R_X86_64_PLT32:
- 	  {
- 	    grub_int64_t value;
- 	    value = ((grub_int32_t) *addr32) + rel->r_addend + sym->st_value -
-diff --git a/util/grub-mkimagexx.c b/util/grub-mkimagexx.c
-index a2bb054..39d7efb 100644
--- a/util/grub-mkimagexx.c
-+++ b/util/grub-mkimagexx.c
-@@ -841,6 +841,7 @@ SUFFIX (relocate_addresses) (Elf_Ehdr *e, Elf_Shdr *sections,
- 		  break;
- 
- 		case R_X86_64_PC32:
-+		case R_X86_64_PLT32:
- 		  {
- 		    grub_uint32_t *t32 = (grub_uint32_t *) target;
- 		    *t32 = grub_host_to_target64 (grub_target_to_host32 (*t32)
-diff --git a/util/grub-module-verifier.c b/util/grub-module-verifier.c
-index 9179285..a79271f 100644
--- a/util/grub-module-verifier.c
-+++ b/util/grub-module-verifier.c
-@@ -19,6 +19,7 @@ struct grub_module_verifier_arch archs[] = {
-       -1
-     }, (int[]){
-       R_X86_64_PC32,
-+      R_X86_64_PLT32,
-       -1
-     }
-   },
-- 
-2.7.4
-
@@ -1,2 +1,2 @@
 # Locally calculated
-sha256 9aaea1f5e8bf3c9d7e735f569d130b5c2ec773c43e0cfabc9b8dee32adbf7e4e mv-ddr-marvell-99d772547314f84921268d57e53d8769197d3e21.tar.gz
+sha256 d413546367ffa3b5f4373a777b9efeb32dcc74d6106897c248935ecb79afc454 mv-ddr-marvell-656440a9690f3d07be9e3d2c39d7cf56fd96eb7b.tar.gz
@@ -4,8 +4,7 @@
 #
 ################################################################################

-# This is the commit for mv_ddr-armada-18.09.2
-MV_DDR_MARVELL_VERSION = 99d772547314f84921268d57e53d8769197d3e21
+MV_DDR_MARVELL_VERSION = 656440a9690f3d07be9e3d2c39d7cf56fd96eb7b
 MV_DDR_MARVELL_SITE = $(call github,MarvellEmbeddedProcessors,mv-ddr-marvell,$(MV_DDR_MARVELL_VERSION))
 MV_DDR_MARVELL_LICENSE = GPL-2.0+ or LGPL-2.1 with freertos-exception-2.0, BSD-3-Clause, Marvell Commercial
 MV_DDR_MARVELL_LICENSE_FILES = ddr3_init.c
@@ -1,14 +0,0 @@
-comment "riscv-pk needs a Linux kernel to be built"
-	depends on BR2_riscv
-	depends on !BR2_LINUX_KERNEL
-
-config BR2_TARGET_RISCV_PK
-	bool "riscv-pk"
-	depends on BR2_riscv
-	depends on BR2_LINUX_KERNEL
-	help
-	  The RISC-V Proxy Kernel (pk) package contains the Berkeley
-	  Boot Loader (BBL) which has been designed to boot a Linux
-	  kernel on a RISC-V processor.
-
-	  https://github.com/riscv/riscv-pk.git
@@ -1,32 +0,0 @@
-################################################################################
-#
-# riscv-pk
-#
-################################################################################
-
-RISCV_PK_VERSION = 706cc77c369fd3e4734b5a6aa813d421347f1814
-RISCV_PK_SITE = git://github.com/riscv/riscv-pk.git
-RISCV_PK_LICENSE = BSD-3-Clause
-RISCV_PK_LICENSE_FILES = LICENSE
-RISCV_PK_DEPENDENCIES = linux
-RISCV_PK_SUBDIR = build
-RISCV_PK_INSTALL_IMAGES = YES
-
-define RISCV_PK_CONFIGURE_CMDS
-	mkdir -p $(@D)/build
-	(cd $(@D)/build; \
-		$(TARGET_CONFIGURE_OPTS) ../configure \
-		--host=$(GNU_TARGET_NAME) \
-		--with-payload=$(BINARIES_DIR)/vmlinux \
-	)
-endef
-
-define RISCV_PK_BUILD_CMDS
-	$(TARGET_MAKE_ENV) $(MAKE) -C $(@D)/build bbl
-endef
-
-define RISCV_PK_INSTALL_IMAGES_CMDS
-	$(INSTALL) -D -m 0755 $(@D)/build/bbl $(BINARIES_DIR)/bbl
-endef
-
-$(eval $(generic-package))
@@ -1,34 +0,0 @@
-From 1a74985b2a404639b08882c57f3147229605dfd5 Mon Sep 17 00:00:00 2001
-From: Mike Frysinger <vapier@gentoo.org>
-Date: Tue, 19 Apr 2016 06:50:31 -0400
-Subject: [PATCH] extlinux: pull in sys/sysmacros.h for major/minor/makedev
-
-These functions are defined in sys/sysmacros.h, so add the include to
-main.c.  This is already handled correctly in mountinfo.c.  Otherwise
-we get build failures like:
-
-main.o: In function 'find_device_sysfs':
-extlinux/main.c:1131: undefined reference to 'minor'
-
-Signed-off-by: Mike Frysinger <vapier@gentoo.org>
-Signed-off-by: Gene Cumm <gene.cumm@gmail.com>
-Signed-off-by: Alexander Sverdlin <alexader.sverdlin@gmail.com>
---
- extlinux/main.c | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/extlinux/main.c b/extlinux/main.c
-index a7ebd49..ebff7ea 100644
--- a/extlinux/main.c
-+++ b/extlinux/main.c
-@@ -38,6 +38,7 @@
- #include <sysexits.h>
- #include <sys/ioctl.h>
- #include <sys/stat.h>
-+#include <sys/sysmacros.h>
- #include <sys/types.h>
- #include <sys/mount.h>
- #include <sys/vfs.h>
-- 
-2.10.5.GIT
-
@@ -39,7 +39,7 @@ choice
 	  Select the specific U-Boot version you want to use

 config BR2_TARGET_UBOOT_LATEST_VERSION
-	bool "2018.09"
+	bool "2018.07"

 config BR2_TARGET_UBOOT_CUSTOM_VERSION
 	bool "Custom version"
@@ -87,7 +87,7 @@ endif

 config BR2_TARGET_UBOOT_VERSION
 	string
-	default "2018.09"	if BR2_TARGET_UBOOT_LATEST_VERSION
+	default "2018.07"	if BR2_TARGET_UBOOT_LATEST_VERSION
 	default BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE \
 		if BR2_TARGET_UBOOT_CUSTOM_VERSION
 	default "custom"	if BR2_TARGET_UBOOT_CUSTOM_TARBALL
@@ -159,14 +159,6 @@ config BR2_TARGET_UBOOT_NEEDS_OPENSSL
 	  typically the case when the board configuration has
 	  CONFIG_FIT_SIGNATURE enabled.

-config BR2_TARGET_UBOOT_NEEDS_LZOP
-	bool "U-Boot needs lzop"
-	help
-	  Select this option if your U-Boot board configuration
-	  requires lzop to be available on the host. This is typically
-	  the case when the board configuration has CONFIG_SPL_LZO
-	  enabled.
-
 config BR2_TARGET_UBOOT_NEEDS_ATF_BL31
 	bool "U-Boot needs ATF BL31"
 	depends on BR2_TARGET_ARM_TRUSTED_FIRMWARE
@@ -1,2 +1,2 @@
 # Locally computed:
-sha256  839bf23cfe8ce613a77e583a60375179d0ad324e92c82fbdd07bebf0fd142268  u-boot-2018.09.tar.bz2
+sha256  9f10df88bc91b35642e461217f73256bbaeeca9ae2db8db56197ba5e89e1f6d4  u-boot-2018.07.tar.bz2
@@ -152,10 +152,6 @@ ifeq ($(BR2_TARGET_UBOOT_NEEDS_OPENSSL),y)
 UBOOT_DEPENDENCIES += host-openssl
 endif

-ifeq ($(BR2_TARGET_UBOOT_NEEDS_LZOP),y)
-UBOOT_DEPENDENCIES += host-lzop
-endif
-
 # prior to u-boot 2013.10 the license info was in COPYING. Copy it so
 # legal-info finds it
 define UBOOT_COPY_OLD_LICENSE_FILE
@@ -227,9 +223,8 @@ UBOOT_KCONFIG_EDITORS = menuconfig xconfig gconfig nconfig
 # (which is typically wchar) but link with
 # $(HOST_DIR)/lib/libncurses.so (which is not).  We don't actually
 # need any host-package for kconfig, so remove the HOSTCC/HOSTLDFLAGS
-# override again. In addition, host-ccache is not ready at kconfig
-# time, so use HOSTCC_NOCCACHE.
-UBOOT_KCONFIG_OPTS = $(UBOOT_MAKE_OPTS) HOSTCC="$(HOSTCC_NOCCACHE)" HOSTLDFLAGS=""
+# override again.
+UBOOT_KCONFIG_OPTS = $(UBOOT_MAKE_OPTS) HOSTCC="$(HOSTCC)" HOSTLDFLAGS=""
 define UBOOT_HELP_CMDS
 	@echo '  uboot-menuconfig       - Run U-Boot menuconfig'
 	@echo '  uboot-savedefconfig    - Run U-Boot savedefconfig'
@@ -287,7 +282,7 @@ define UBOOT_INSTALL_IMAGES_CMDS
 	)
 	$(UBOOT_GENERATE_ENV_IMAGE)
 	$(if $(BR2_TARGET_UBOOT_BOOT_SCRIPT),
-		$(MKIMAGE) -C none -A $(MKIMAGE_ARCH) -T script \
+		$(HOST_DIR)/bin/mkimage -C none -A $(MKIMAGE_ARCH) -T script \
 			-d $(call qstrip,$(BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE)) \
 			$(BINARIES_DIR)/boot.scr)
 endef
@@ -0,0 +1,17 @@
+config BR2_TARGET_XLOADER
+	bool "X-loader"
+	depends on BR2_cortex_a8 || BR2_cortex_a9
+	help
+	  The x-loader bootloader. It is mainly used on OMAP-based
+	  platforms.
+
+	  http://omappedia.org/wiki/Linux_OMAP_Kernel_Main
+
+if BR2_TARGET_XLOADER
+config BR2_TARGET_XLOADER_BOARDNAME
+	string "x-loader board name"
+	help
+	  One of x-loader supported boards to be built.
+	  This will be suffixed with _config to meet x-loader
+	  standard naming.
+endif
@@ -0,0 +1,32 @@
+################################################################################
+#
+# x-loader
+#
+################################################################################
+
+XLOADER_VERSION = 6f3a26101303051e0f91b6213735b68ce804e94e
+XLOADER_SITE = git://gitorious.org/x-loader/x-loader.git
+XLOADER_BOARD_NAME = $(call qstrip,$(BR2_TARGET_XLOADER_BOARDNAME))
+
+XLOADER_LICENSE = GPL-2.0+
+XLOADER_LICENSE_FILES = README
+
+XLOADER_INSTALL_IMAGES = YES
+
+define XLOADER_BUILD_CMDS
+	$(MAKE) CROSS_COMPILE="$(TARGET_CROSS)" -C $(@D) $(XLOADER_BOARD_NAME)_config
+	$(MAKE) CROSS_COMPILE="$(TARGET_CROSS)" -C $(@D) all
+	$(MAKE) CROSS_COMPILE="$(TARGET_CROSS)" -C $(@D) ift
+endef
+
+define XLOADER_INSTALL_IMAGES_CMDS
+	$(INSTALL) -D -m 0755 $(@D)/MLO $(BINARIES_DIR)/
+endef
+
+$(eval $(generic-package))
+
+ifeq ($(BR2_TARGET_XLOADER)$(BR_BUILDING),yy)
+ifeq ($(XLOADER_BOARD_NAME),)
+$(error NO x-loader board name set. Check your BR2_BOOT_XLOADER_BOARDNAME setting)
+endif
+endif
@@ -1,62 +0,0 @@
-BR2_aarch64=y
-BR2_cortex_a53=y
-BR2_ARM_FPU_VFPV4=y
-
-# Linux headers same as kernel, a 4.17 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_17=y
-
-# Firmware
-BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.07"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="amarula_a64_relic"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,amarula,linux-amarula,v1.0a)/linux-amarula_v1.0a.tar.gz"
-BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-a64-amarula-relic"
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Filesystem
-BR2_TARGET_GENERIC_ISSUE="Welcome to Amarula A64-Relic"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_PACKAGE_HOST_ANDROID_TOOLS_FASTBOOT=y
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/amarula/a64-relic/genimage.cfg"
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/amarula/a64-relic/post-build.sh"
-BR2_ROOTFS_OVERLAY="board/amarula/a64-relic/rootfs_overlay"
-
-# wireless firmware
-BR2_PACKAGE_LINUX_FIRMWARE=y
-BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XX=y
-
-# wireless tools
-BR2_PACKAGE_IW=y
-BR2_PACKAGE_WPA_SUPPLICANT=y
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211=y
-BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT=y
-BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
@@ -12,7 +12,7 @@ BR2_LINUX_KERNEL_INTREE_DTS_NAME="arm/juno arm/juno-r1 arm/juno-r2"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/ARM-software/arm-trusted-firmware.git"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="v1.4"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="v1.3"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="juno"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y
@@ -28,7 +28,4 @@ BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx27-apf27dev"

 # U-boot
 BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.09"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="apf27"
+BR2_TARGET_UBOOT_BOARDNAME="apf27"
@@ -59,6 +59,7 @@ BR2_PACKAGE_DTC_PROGRAMS=y
 BR2_PACKAGE_BLUEZ_UTILS=y
 BR2_PACKAGE_BRIDGE_UTILS=y
 BR2_PACKAGE_CAN_UTILS=y
+BR2_PACKAGE_DROPBEAR=y
 BR2_PACKAGE_ETHTOOL=y
 BR2_PACKAGE_IPERF=y
 BR2_PACKAGE_IPROUTE2=y
@@ -62,6 +62,7 @@ BR2_PACKAGE_DTC_PROGRAMS=y
 BR2_PACKAGE_BLUEZ_UTILS=y
 BR2_PACKAGE_BRIDGE_UTILS=y
 BR2_PACKAGE_CAN_UTILS=y
+BR2_PACKAGE_DROPBEAR=y
 BR2_PACKAGE_ETHTOOL=y
 BR2_PACKAGE_IPERF=y
 BR2_PACKAGE_IPROUTE2=y
@@ -51,6 +51,7 @@ BR2_PACKAGE_DTC_PROGRAMS=y
 BR2_PACKAGE_BLUEZ_UTILS=y
 BR2_PACKAGE_BRIDGE_UTILS=y
 BR2_PACKAGE_CAN_UTILS=y
+BR2_PACKAGE_DROPBEAR=y
 BR2_PACKAGE_ETHTOOL=y
 BR2_PACKAGE_IPERF=y
 BR2_PACKAGE_IPROUTE2=y
@@ -65,6 +65,7 @@ BR2_PACKAGE_DTC_PROGRAMS=y
 BR2_PACKAGE_BLUEZ_UTILS=y
 BR2_PACKAGE_BRIDGE_UTILS=y
 BR2_PACKAGE_CAN_UTILS=y
+BR2_PACKAGE_DROPBEAR=y
 BR2_PACKAGE_ETHTOOL=y
 BR2_PACKAGE_IPERF=y
 BR2_PACKAGE_IPROUTE2=y
@@ -61,6 +61,7 @@ BR2_PACKAGE_DTC_PROGRAMS=y
 BR2_PACKAGE_BLUEZ_UTILS=y
 BR2_PACKAGE_BRIDGE_UTILS=y
 BR2_PACKAGE_CAN_UTILS=y
+BR2_PACKAGE_DROPBEAR=y
 BR2_PACKAGE_ETHTOOL=y
 BR2_PACKAGE_IPERF=y
 BR2_PACKAGE_IPROUTE2=y
@@ -64,6 +64,7 @@ BR2_PACKAGE_DTC_PROGRAMS=y
 BR2_PACKAGE_BLUEZ_UTILS=y
 BR2_PACKAGE_BRIDGE_UTILS=y
 BR2_PACKAGE_CAN_UTILS=y
+BR2_PACKAGE_DROPBEAR=y
 BR2_PACKAGE_ETHTOOL=y
 BR2_PACKAGE_IPERF=y
 BR2_PACKAGE_IPROUTE2=y
@@ -62,6 +62,7 @@ BR2_PACKAGE_DTC_PROGRAMS=y
 BR2_PACKAGE_BLUEZ_UTILS=y
 BR2_PACKAGE_BRIDGE_UTILS=y
 BR2_PACKAGE_CAN_UTILS=y
+BR2_PACKAGE_DROPBEAR=y
 BR2_PACKAGE_ETHTOOL=y
 BR2_PACKAGE_IPERF=y
 BR2_PACKAGE_IPROUTE2=y
@@ -65,6 +65,7 @@ BR2_PACKAGE_DTC_PROGRAMS=y
 BR2_PACKAGE_BLUEZ_UTILS=y
 BR2_PACKAGE_BRIDGE_UTILS=y
 BR2_PACKAGE_CAN_UTILS=y
+BR2_PACKAGE_DROPBEAR=y
 BR2_PACKAGE_ETHTOOL=y
 BR2_PACKAGE_IPERF=y
 BR2_PACKAGE_IPROUTE2=y
@@ -1,28 +1,38 @@
 BR2_arm=y
 BR2_cortex_a7=y
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_18=y
-BR2_TARGET_GENERIC_ISSUE="Welcome to Bananapi M1"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/bananapi/bananapi-m1/genimage.cfg"
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.18.12"
-BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun7i-a20-bananapi"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_ARM_EABIHF=y
+
+# Linux headers same as kernel, a 4.13 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_13=y
+
+# Bootloader
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.07"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.09"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="Bananapi"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_FORMAT_BIN=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
 BR2_TARGET_UBOOT_BOOT_SCRIPT=y
 BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/bananapi/bananapi-m1/boot.cmd"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.13.7"
+BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun7i-a20-bananapi"
+
+# Filesystem
+BR2_TARGET_GENERIC_ISSUE="Welcome to Bananapi M1"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/bananapi/bananapi-m1/genimage.cfg"
@@ -1,29 +0,0 @@
-BR2_arm=y
-BR2_cortex_a7=y
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_18=y
-BR2_TARGET_GENERIC_ISSUE="Welcome to Bananapi M2 Ultra"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/bananapi/bananapi-m2-ultra/genimage.cfg"
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.18.12"
-BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-r40-bananapi-m2-ultra"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-# BR2_TARGET_ROOTFS_TAR is not set
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.07"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="bananapi_m2_berry"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin"
-BR2_TARGET_UBOOT_BOOT_SCRIPT=y
-BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/bananapi/bananapi-m2-ultra/boot.cmd"
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
@@ -1,13 +1,13 @@
 BR2_arm=y
 BR2_cortex_a8=y
 BR2_GLOBAL_PATCH_DIR="board/beaglebone/patches"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
 BR2_TARGET_GENERIC_GETTY_PORT="ttyO0"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/beaglebone/post-image.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.ti.com/processor-sdk/processor-sdk-linux.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="4796173fc58688055a99a1cef19a839174067220"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="a75d8e93056181d512f6c818e8627bd4554aaf92"
 BR2_LINUX_KERNEL_DEFCONFIG="omap2plus"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="am335x-evm am335x-bone am335x-boneblack am335x-bonegreen am335x-evmsk"
@@ -16,7 +16,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.07"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.01"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="am335x_evm"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 # BR2_TARGET_UBOOT_FORMAT_BIN is not set
@@ -27,7 +27,6 @@ BR2_TARGET_UBOOT_BOARDNAME="ci20_mmc"
 BR2_TARGET_UBOOT_CUSTOM_GIT=y
 BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/MIPS/CI20_u-boot"
 BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="dd3c1b95dac7d10b2ca5806f65e5c1050d7dd0fa"
-BR2_TARGET_UBOOT_PATCH="board/ci20/patches/uboot"
 BR2_TARGET_UBOOT_FORMAT_IMG=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl.bin"
@@ -1,15 +1,15 @@
 BR2_arm=y
 BR2_cortex_a7=y
 BR2_ARM_FPU_NEON_VFPV4=y
-# Linux headers same as kernel, a 4.18 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_18=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
 BR2_TARGET_GENERIC_HOSTNAME="Cubieboard2"
 BR2_TARGET_GENERIC_ISSUE="Welcome to Cubieboard2!"
 BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/cubietech/cubieboard2/post-image.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.18.14"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6"
 BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun7i-a20-cubieboard2"
@@ -18,10 +18,9 @@ BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.09"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.05"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="Cubieboard2"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
 BR2_TARGET_UBOOT_BOOT_SCRIPT=y
@@ -2,9 +2,6 @@
 BR2_arm=y
 BR2_cortex_a7=y

-# patches
-BR2_GLOBAL_PATCH_DIR="board/freescale/imx7dsdb/patches"
-
 # Linux headers same as kernel, a 4.9 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y

@@ -43,7 +43,6 @@ BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6q-sabresd imx6dl-sabresd imx6qp-sabresd"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/freescale/imx6-sabresd/linux_qt5.fragment"
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y

 # GL driver
 BR2_PACKAGE_MESA3D=y
@@ -11,7 +11,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="mx6slevk"
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.11"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.11"
 BR2_TARGET_UBOOT_FORMAT_IMX=y
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
@@ -3,8 +3,8 @@ BR2_arm=y
 BR2_cortex_a7=y
 BR2_ARM_FPU_NEON_VFPV4=y

-# Linux headers same as kernel, a 4.18 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_18=y
+# Linux headers same as kernel, a 4.14 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y

 # system
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
@@ -12,17 +12,16 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
 # kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.18.11"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6ul-14x14-evk"
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y

 # bootloader
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="mx6ul_14x14_evk"
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.07"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.11"
 BR2_TARGET_UBOOT_FORMAT_IMG=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="SPL"
@@ -1,27 +0,0 @@
-BR2_arm=y
-BR2_cortex_a7=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/hardkernel/odroidxu4/post-image.sh"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/hardkernel/linux.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="4.14.16-104"
-BR2_LINUX_KERNEL_DEFCONFIG="odroidxu4"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="exynos5422-odroidxu4"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-# BR2_TARGET_ROOTFS_TAR is not set
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_GIT=y
-BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/hardkernel/u-boot.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="88af53fbcef8386cb4d5f04c19f4b2bcb69e90ca"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="odroid-xu4"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_FORMAT_DTB_BIN=y
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="sd_fuse/bl1.bin.hardkernel sd_fuse/bl2.bin.hardkernel.720k_uboot sd_fuse/tzsw.bin.hardkernel "
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
@@ -3,8 +3,8 @@ BR2_arm=y
 BR2_cortex_a7=y
 BR2_ARM_EABIHF=y

-# Linux headers same as kernel, a 4.18 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_18=y
+# Linux headers same as kernel, a 4.14 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y

 # System configuration
 BR2_TARGET_GENERIC_HOSTNAME="a20-olinuxino"
@@ -18,7 +18,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/olimex/a20_olinuxino/genimage.cfg"
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.18.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14.26"
 BR2_LINUX_KERNEL_USE_DEFCONFIG=y
 BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
@@ -34,7 +34,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.09"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.03"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="A20-OLinuXino-Lime2"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
@@ -3,8 +3,8 @@ BR2_arm=y
 BR2_cortex_a7=y
 BR2_ARM_EABIHF=y

-# Linux headers same as kernel, a 4.18 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_18=y
+# Linux headers same as kernel, a 4.14 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y

 # System configuration
 BR2_TARGET_GENERIC_HOSTNAME="a20-olinuxino"
@@ -18,7 +18,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/olimex/a20_olinuxino/genimage.cfg"
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.18.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14.26"
 BR2_LINUX_KERNEL_USE_DEFCONFIG=y
 BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
@@ -34,7 +34,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.09"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.03"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="A20-OLinuXino-Lime"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
@@ -3,9 +3,6 @@ BR2_arm=y
 BR2_cortex_a7=y
 BR2_ARM_EABIHF=y

-# The old 3.4 kernel doesn't build with gcc >= 7.x
-BR2_GCC_VERSION_6_X=y
-
 # Linux headers same as kernel, a 3.4 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_4=y

@@ -42,7 +39,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.07"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.03"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="A20-OLinuXino-Lime"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
@@ -50,7 +47,7 @@ BR2_TARGET_UBOOT_FORMAT_BIN=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
 BR2_TARGET_UBOOT_BOOT_SCRIPT=y
-BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/olimex/a20_olinuxino/boot-legacy.cmd"
+BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/olimex/a20_olinuxino/boot-mali.cmd"

 # Additional tools
 BR2_PACKAGE_HOST_GENIMAGE=y
@@ -21,7 +21,6 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.01"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_zero_plus2"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
 BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
 BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
@@ -38,7 +37,6 @@ BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-orangepi-zero-plus2"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/orangepi/orangepi-zero-plus2/linux-extras.config"
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y

 # wireless firmware
 BR2_PACKAGE_LINUX_FIRMWARE=y
@@ -19,21 +19,19 @@ BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/pc/post-build.sh"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/pc/post-image.sh support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pc/genimage-bios.cfg"

-# Linux headers same as kernel, a 4.18 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_18=y
+# Linux headers same as kernel, a 4.13 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_13=y

 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.18.10"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.13.8"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/pc/linux.config"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y

 # Firmware
 BR2_PACKAGE_LINUX_FIRMWARE=y
@@ -22,21 +22,19 @@ BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/pc/post-build.sh"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/pc/post-image.sh support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pc/genimage-efi.cfg"

-# Linux headers same as kernel, a 4.18 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_18=y
+# Linux headers same as kernel, a 4.13 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_13=y

 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.18.10"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.13.8"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/pc/linux.config"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y

 # Firmware
 BR2_PACKAGE_LINUX_FIRMWARE=y
@@ -1,6 +1,5 @@
 # Architecture
 BR2_aarch64=y
-BR2_cortex_a53=y

 # System
 BR2_SYSTEM_DHCP="eth0"
@@ -1,24 +0,0 @@
-# Architecture
-BR2_riscv=y
-
-# System
-BR2_SYSTEM_DHCP="eth0"
-
-# Filesystem
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_GENERIC_GETTY=y
-BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
-
-# Linux headers same as kernel, a 4.15 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_15=y
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/riscv/riscv-linux.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="fe92d7905c6ea0ebeabeb725b8040754ede7c220"
-BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/riscv64-virt/linux.config"
-
-# Bootloader
-BR2_TARGET_RISCV_PK=y
@@ -9,7 +9,7 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y

 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,6d27aa156c26977dfd079a7107e31670127d17d3)/linux-6d27aa156c26977dfd079a7107e31670127d17d3.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,865ddc1393f558198e7e7ce70928ff2e49c4f7f6)/linux-865ddc1393f558198e7e7ce70928ff2e49c4f7f6.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"

 # Build the DTBs for A/B from the kernel sources: the zero is the same
@@ -9,7 +9,7 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y

 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,6d27aa156c26977dfd079a7107e31670127d17d3)/linux-6d27aa156c26977dfd079a7107e31670127d17d3.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,865ddc1393f558198e7e7ce70928ff2e49c4f7f6)/linux-865ddc1393f558198e7e7ce70928ff2e49c4f7f6.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-0-w"
@@ -12,7 +12,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y

 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,6d27aa156c26977dfd079a7107e31670127d17d3)/linux-6d27aa156c26977dfd079a7107e31670127d17d3.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,865ddc1393f558198e7e7ce70928ff2e49c4f7f6)/linux-865ddc1393f558198e7e7ce70928ff2e49c4f7f6.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"

 # Build the DTB from the kernel sources
@@ -11,7 +11,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y

 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,6d27aa156c26977dfd079a7107e31670127d17d3)/linux-6d27aa156c26977dfd079a7107e31670127d17d3.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,865ddc1393f558198e7e7ce70928ff2e49c4f7f6)/linux-865ddc1393f558198e7e7ce70928ff2e49c4f7f6.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi3"

 # Build the DTB from the kernel sources
@@ -11,7 +11,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y

 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,6d27aa156c26977dfd079a7107e31670127d17d3)/linux-6d27aa156c26977dfd079a7107e31670127d17d3.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,865ddc1393f558198e7e7ce70928ff2e49c4f7f6)/linux-865ddc1393f558198e7e7ce70928ff2e49c4f7f6.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"

 # Build the DTB from the kernel sources
@@ -12,7 +12,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y

 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,6d27aa156c26977dfd079a7107e31670127d17d3)/linux-6d27aa156c26977dfd079a7107e31670127d17d3.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,865ddc1393f558198e7e7ce70928ff2e49c4f7f6)/linux-865ddc1393f558198e7e7ce70928ff2e49c4f7f6.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"

 # Build the DTB from the kernel sources
@@ -11,7 +11,7 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y

 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,6d27aa156c26977dfd079a7107e31670127d17d3)/linux-6d27aa156c26977dfd079a7107e31670127d17d3.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,865ddc1393f558198e7e7ce70928ff2e49c4f7f6)/linux-865ddc1393f558198e7e7ce70928ff2e49c4f7f6.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"

 # Build the DTBs for A/B, A+/B+ and compute module from the kernel sources
@@ -1,42 +0,0 @@
-# architecture
-BR2_arm=y
-BR2_cortex_a9=y
-BR2_ARM_ENABLE_NEON=y
-BR2_ARM_ENABLE_VFP=y
-BR2_ARM_FPU_VFPV3=y
-
-# system
-BR2_TARGET_GENERIC_GETTY=y
-BR2_TARGET_GENERIC_GETTY_PORT="ttymxc1"
-
-# bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.07"
-BR2_TARGET_UBOOT_BOARDNAME="riotboard"
-BR2_TARGET_UBOOT_FORMAT_IMX=y
-
-# Linux headers same as kernel, a 4.18 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_18=y
-
-# kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.18.10"
-BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-riotboard"
-BR2_LINUX_KERNEL_INSTALL_TARGET=y
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# required tools to create the SD card image
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-
-# rootfs
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_ROOTFS_OVERLAY="board/embest/riotboard/rootfs_overlay"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/embest/riotboard/genimage.cfg"
--- a/Show More
+++ b/Show More