This is a maintenance release of the current stable WebKitGTK+ version,
which contains security fixes for CVE-2018-4345, CVE-2018-4372,
CVE-2018-4373, CVE-2018-4375, CVE-2018-4376, CVE-2018-4378,
CVE-2018-4382, CVE-2018-4386, CVE-2018-4392, and CVE-2018-4416.
Additionally, it fixes a few build failures, and a crash when using
certain version of Cairo.
Release notes can be found in the announcement:
https://webkitgtk.org/2018/11/21/webkitgtk2.22.4-released.html
More details on the issues covered by security fixes can be found
in the corresponding security advisory:
https://webkitgtk.org/security/WSA-2018-0008.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 7a827a17dc)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Build of package will sometime fails because of the following issue:
install-static target has two dependencies: dispatcher-static and
install-common
Because dispatcher-static is not a file but only a target, it will
always be called to build usb_modeswitch_dispatcher.
So, even if install-common depends on usb_modeswitch_dispatcher, in some
rare cases, install-static won't be able to install
usb_modeswitch_dispatcher because it is being rebuild by
dispatcher-static
To fix this issue, disable parallel build
Fixes:
- http://autobuild.buildroot.org/results/8297be35725b816ff5afaf909605ceb41223efb6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a554109af8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Graphviz' dot utility does not like nodes which names does not start
with an ^[[:alpha:]], i.e. 18xx-ti-utils would cause grievance:
Warning: syntax ambiguity - badly delimited number '18x' in line 4 [...]/graph-depends.dot splits into two tokens
Warning: syntax ambiguity - badly delimited number '18x' in line 5 [...]/graph-depends.dot splits into two tokens
Warning: syntax ambiguity - badly delimited number '18x' in line 6 [...]/graph-depends.dot splits into two tokens
Warning: syntax ambiguity - badly delimited number '18x' in line 7 [...]/graph-depends.dot splits into two tokens
Prefix nodes with an underscore to fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 020206ca57)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Checking for the existence of the dtc binary built by the
non-dependent dtc package may cause instable behaviour when giving more
freedom on the order of how the packages are built (parallelization).
In addidion, when moving to per-package host/target method, the check
would always trigger in the isolated host, leading to linux-dtc always
being installed as dtc.
This in turn may lead to undesired overwriting of the real host-dtc binary
when finally assembling the global host dir.
Thus rework the linux-dtc install condition to be defined by configuration
rather than compile time order.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 860906ee05)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The U-Boot part of the defconfig was not specifying explicitly any
U-Boot version. Since commit 21e3ae8a18
("boot/uboot: default to kconfig buildsystem for latest version"), we
default to using the kconfig build system when the default U-Boot
version is used. Following this change, the apf27 defconfig therefore
started using kconfig, for which the BR2_TARGET_UBOOT_BOARDNAME
Config.in option is not used. Due to this, the build fails with:
boot/uboot/uboot.mk:411: *** No board defconfig name specified, check your BR2_TARGET_UBOOT_BOARD_DEFCONFIG setting. Stop.
Indeed, when Kconfig is used, the board defconfig must be specified
with BR2_TARGET_UBOOT_BOARD_DEFCONFIG.
As part of fixing this, we also set a fixed U-Boot version for this
defconfig, like we do in all other defconfigs.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/123771003
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a8aaee72a7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default, tar will not include any extended attribute (xattr) when
creating archives, and thus will not store capabilties either (as they
are stored in the xattr 'security.capability').
Using option --xattrs is enough to create a tarball with all the xattrs
attached to a file. However, extracting all xattrs from a tarball
requires that --xattrs-include='*' be used. This is not symetric (but on
purpose, as per the documentation), and so is confusing to some.
So, we use --xattrs-include='*' to create the archive, so as to be
explicit that we want all xattrs to be stored.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 6d688e2132)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since 4adaa581b2, S29netplug looks for
/etc/default/network instead of /etc/sysconfig/network. When this
file exists but does not define $NETWORKING, the script fails on line
29 with something like:
/etc/init.d/S29netplug: 29: [: =: unexpected operator
Fix quoting so this error no longer happens.
Signed-off-by: Thomas Claveirole <thomas.claveirole@green-communications.fr>
[Thomas: keep double quotes around "no", keep curly braces when
referencing the variable.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 5682ba9363)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The commands like "make show-build-order" or "make
<package>-show-build-order" show the build order and then print
"make[1]: Nothing to be done for 'show-build-order'" to stdout. It
pollutes output. Technically this message is true but it's not true
for user because he gets an information.
The <package>-show-build-order targets use $(info) for package name
printing. The make utility doesn't consider the internal directive as
a command so it think that it's "Nothing to be done". The patch adds
the empty command to <package>-show-build-order to inform make utility
that taget makes some real actions.
Signed-off-by: Serj Kalichev <serj.kalichev@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: invert $(info) and @:, as suggested by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 75c81a12f6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit e7af4033c3 ("rpm: use the new
gettext logic") introduced a really nasty bug: by adding
$(TARGET_NLS_DEPENDENCIES) to RPM_DEPENDENCIES, it completely
overwrote the existing value of RPM_DEPENDENCIES, entirely masking all
mandatory RPM dependencies.
rpm is fairly towards the end of the alphabet, and most other
mandatory dependencies (berkeleydb, host-pkgconf, file and popt)
appear earlier by alphabetic ordering. Only zlib was afterwards, but
since file depends on zlib, it was always built before. This probably
explains why our autobuilders haven't encountered a single build
failure.
However, a simple "make rpm" clearly exhibits the failure, and
obviously the upcoming per-package folder mechanism makes such bugs
even more obvious.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 36385f87f3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When $(TOPDIR)/dl is a symlink, checking out git submodules can fail,
as reported by Michael in #11086.
To reproduce a similarly-related mis-behaviour:
$ mkdir -p foo/bar foo/buz
$ cd foo/bar
$ ln -s ../buz meh
$ cd meh
$ cd ../../foo
The last command should not succeed, because, relative to meh, there is
no ../../foo directory; we would expect it to be ../../../foo, instead.
But since meh is a symlink to a directory, then a relative path from that
symlink is interpreted as relative to the derefrenced directory, i.e.
from buz in this case.
But where this gets even weirder, is that, if the last command is
replaced by:
$ cd ../../../foo
then it still works, too.
And that is the root of Michael's issue: the dl directory in Buildroot's
TOPDIR is a symlink to a similarly-named directory one directory higher,
which then confuses relative paths, which gets especially and noticeably
bad for git submodules.
Avoid this strangeness, and just use so-called "physical" path, i.e. a
path where all symlinks to directories have been dereferenced.
Fixes: #11086
Reported-by: Michael Nosthoff <posted@heine.so>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Michael Nosthoff <posted@heine.so>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 632e164a19)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The command "make show-build-order" doesn't show dependencies of rootfs-common target.
This patch adds $(ROOTFS_COMMON_DEPENDENCIES) to PACKAGES variable.
Signed-off-by: Serj Kalichev <serj.kalichev@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 305e4487e5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When adding the custom BR2_WGET value in the configuration,
genrandconfig forgets to add a newline. Due to this, the next option
that is added is printed on the same line as BR2_WGET="", which causes
it to be ignored.
Due to this, in all builds, the line right after BR2_WGET was
ignored. It could have been BR2_ENABLE_DEBUG, BR2_INIT_BUSYBOX,
BR2_INIT_SYSTEMD, BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV,
BR2_STATIC_LIBS or BR2_PACKAGE_PYTHON_PY_ONLY depending on the
randomization.
Fix that by adding a proper newline at the end of the BR2_WGET option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 3eb49f59d6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The configure.ac script uses PKG_CHECK_MODULES(), and we autoreconf
the package, so host-pkgconf should be listed in the dependencies.
This issue is seen either with per-package folders, or by doing a
clean build with just "make openocd":
>>> openocd 0.10.0 Configuring
>>> openocd 0.10.0 Autoreconfiguring
[...]
configure.ac:12: error: possibly undefined macro: AC_MSG_WARN
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
configure.ac:201: error: possibly undefined macro: AC_DEFINE
configure.ac:582: error: possibly undefined macro: AC_MSG_NOTICE
Even if the message seems unrelated, it's really the lack of pkg.m4
from host-pkgconf that causes the issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 915c136c5c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When /etc/selinux/semanage.conf does not exist, libsemanage tries to
overwrite it. For the target package, it works fine because $(DESTDIR)
is taken into account.
However, for the host package, $(DESTDIR) is empty, and the location
used for /etc/selinux/semanage.conf is not affected by $(PREFIX). This
causes host-libsemanage to try to install /etc/selinux/semanage.conf,
which obviously fails with:
test -f /etc/selinux/semanage.conf || install -m 644 -D semanage.conf /etc/selinux/semanage.conf
install: cannot create directory '/etc/selinux': Permission denied
To fix this, this commit passes DEFAULT_SEMANAGE_CONF_LOCATION in the
make options when building/installing host-libsemanage, providing a
path to semanage.conf that Buildroot can write to.
Fixes:
http://autobuild.buildroot.net/results/cd27e3c66274622d0c3dd5a601a36efb1bc45011/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 4c9c70453c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The xlib_libfontenc configure.ac uses PKG_CHECK_MODULES(), but the
Buildroot package does not have a dependency on host-pkgconf. This
causes a build failure with per-package host/target folders, or if one
builds just with "make xlib_libfontenc", which is why it was never
detected by the autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 7b1238055c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2018-16062: dwarf_getaranges in dwarf_getaranges.c in libdw in elfutils
before 2018-08-18 allows remote attackers to cause a denial of service
(heap-based buffer over-read) via a crafted file.
CVE-2018-16402: libelf/elf_end.c in elfutils 0.173 allows remote attackers
to cause a denial of service (double free and application crash) or possibly
have unspecified other impact because it tries to decompress twice.
CVE-2018-16403: libdw in elfutils 0.173 checks the end of the attributes
list incorrectly in dwarf_getabbrev in dwarf_getabbrev.c and dwarf_hasattr
in dwarf_hasattr.c, leading to a heap-based buffer over-read and an
application crash.
For more details, see the announcement:
https://sourceware.org/ml/elfutils-devel/2018-q3/msg00116.html
0.172 and 0.173 also included fixes for crashes and hangs found by afl-fuzz
(no CVEs assigned):
https://sourceware.org/ml/elfutils-devel/2018-q2/msg00272.htmlhttps://sourceware.org/ml/elfutils-devel/2018-q2/msg00209.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 6a74acb6fb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop the po/ disable patch; not needed anymore.
Drop the __mempcpy compatibility patch; __mempcpy is not used anymore.
Refresh the -Werror removal patch; still needed, unfortunately.
Renumber the remaining patches.
Add GPLv3 license file.
Add license files hash.
[Peter: drop security reference, was added post-release]
Cc: Stefan Fröberg <stefan.froberg@petroprogram.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit f0335b0cf7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
>From the advisory:
Due to incorrect input handling, Squid is vulnerable to a
Cross-Site Scripting vulnerability when generating HTTPS response
messages about TLS errors.
http://www.squid-cache.org/Advisories/SQUID-2018_4.txt
Add the patch from the 3.5 branch fixing this issue.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
CVE-2018-12384: NSS responded to an SSLv2-compatible ClientHello with a
ServerHello that had an all-zero random.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 1c32e4c298)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Replace $(BR2_KERNEL_MIRROR) by https://git.kernel.org/pub, which
fixes the download of this package:
>>> trace-cmd trace-cmd-v2.6.1 Downloading
Initialized empty Git repository in /home/thomas/dl/trace-cmd/git/.git/
Fetching all references
fatal: repository 'https://cdn.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git/' not found
Detected a corrupted git cache.
Removing it and starting afresh.
Initialized empty Git repository in /home/thomas/dl/trace-cmd/git/.git/
Fetching all references
fatal: repository 'https://cdn.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git/' not found
Detected a corrupted git cache.
This is the second time in a row; bailing out
--2018-11-11 21:08:00-- http://sources.buildroot.net/trace-cmd/trace-cmd-trace-cmd-v2.6.1.tar.gz
Resolving sources.buildroot.net (sources.buildroot.net)... 104.25.210.19, 104.25.211.19, 2606:4700:20::6819:d313, ...
Connecting to sources.buildroot.net (sources.buildroot.net)|104.25.210.19|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1859835 (1.8M) [application/x-gtar-compressed]
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit e311d8387d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since version 0.15.0, qemu has an optional dependency to opengl:
https://github.com/qemu/qemu/commit/20ff075bb3340c5278a0da38ad1f4d602565aa06
Since version 2.4, libepoxy is also needed to enable opengl:
https://github.com/qemu/qemu/commit/dcf30025c3e3d43140a687240433de1920adf8b0
As a result if libepoxy is built before qemu, opengl support will be
detected (see config.log):
OpenGL support yes
OpenGL dmabufs yes
This will raise the failures in milkymist-tmu2:
hw/display/milkymist-tmu2.c:35:22: fatal error: X11/Xlib.h: No such file or directory
or in sdl2:
CC /home/peko/autobuild/instance-0/output/targetui/sdl2-2d.o
In file included from /home/peko/autobuild/instance-0/output/build/qemu-2.12.1/include/ui/egl-context.h:5:0,
from ui/egl-context.c:3:
/home/peko/autobuild/instance-0/output/build/qemu-2.12.1/include/ui/egl-helpers.h:45:55: error: unknown type name 'Window'; did you mean 'minor'?
or in translate-a64:
/accts/mlweber1/scripts/instance-3/output/build/qemu-2.12.1/target/arm/translate-a64.c: In function 'handle_shri_with_rndacc':
/accts/mlweber1/scripts/instance-3/output/build/qemu-2.12.1/target/arm/translate-a64.c:7000:28: warning: 'tcg_src_hi' may be used uninitialized in this function [-Wmaybe-uninitialized]
tcg_gen_mov_i64(tcg_src, tcg_src_hi);
^
../ui/gtk-egl.o: In function `gd_egl_init':
/accts/mlweber1/scripts/instance-3/output/build/qemu-2.12.1/ui/gtk-egl.c:52: undefined reference to `gdk_x11_window_get_xid'
So, for the time being, disable opengl as done in xen since commit
13c6754f3c.
Fixes:
- http://autobuild.buildroot.org/results/656e45721c72197834462eb2bd8c762e520725a4
- http://autobuild.buildroot.org/results/d4736a930144fc5e25b377bc1c0baf44fbf8718d
- http://autobuild.buildroot.org/results/50e0d7d1b4f5c2b827b50bb82d8fbc066bf31118
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ce735b0c59)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
xtensa-uclinux uses bFLT executable file format that cannot relocate
fields representing offsets from data to code. C++ objects built as PIC
use offsets to encode FDE structures. As a result C++ exception handling
doesn't work correctly on xtensa-uclinux. Don't use PIC by default on
xtensa-uclinux.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: drop gcc-8.x patch]
(cherry picked from commit 4debb2fbb7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The bump to 2.4.48 introduced a bug that, according to the author,
only happen in certain cases on glibc. But under uclibc-ng, it happens
every time.
The bug essentially cause any program calling any libattr.so function
to enter an infinite recursion, because of a symbol conflict between
uclibc-ng and libattr wrappers, that causes the libattr wrappers to
call themselves.
This infinite recursion does not consume the stack, so programs
basically behave like they enter an infinite loop.
It is easy to reproduce with qemu_arm_versatile_defconfig +
BR2_PACKAGE_ATTR: "getfattr ." never returns and takes 100% CPU.
Upstream fixed it, but the patch is not part of a release yet,
so take the patch.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 99989d3b91)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2018-16843: Excessive memory usage in HTTP/2
CVE-2018-16844: Excessive CPU usage in HTTP/2
CVE-2018-16845: Memory disclosure in the ngx_http_mp4_module
Refreshed patch 0004 + 0007 as they no longer applied cleanly.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit c2f5b3a3a8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The following patches have been updated to apply on 1.15.0:
0003-auto-set-ngx_feature_run_force_result-for-each-featu.patch
0006-auto-lib-openssl-conf-use-pkg-config.patch
The follow patch has been removed, because it was applied upstream:
0009-auto-lib-conf-fix-PCRE-condition-WRT-the-http-and-ht.patch
The license file hash has changed because the copyright years were
updated in the LICENSE file:
- * Copyright (C) 2002-2017 Igor Sysoev
- * Copyright (C) 2011-2017 Nginx, Inc.
+ * Copyright (C) 2002-2018 Igor Sysoev
+ * Copyright (C) 2011-2018 Nginx, Inc.
Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
[Thomas: drop unneeded patch updates, improve commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 2fe054a7ec)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2018-12543. If a message is sent to Mosquitto with a topic that
begins with $, but is not $SYS, then an assert that should be unreachable is
triggered and Mosquitto will exit.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 5e62304359)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libmagic (from file package) already provides the buffer_init function
so to avoid a build failure for applications wanting to statically link
with twolame and libmagic (for example sox), rename buffer_init into
bitbuffer_init (also rename buffer_deinit into bitbuffer_deinit and
buffer_sstell into bitbuffer_sstell for consistency)
Fixes:
- http://autobuild.buildroot.org/results/b3fc62e7f372fe595966e84091c11ccdb4cfa77c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 393b205de1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2018-5738: Some versions of BIND can improperly permit recursive query
service to unauthorized clients
- CVE-2018-5740: A flaw in the "deny-answer-aliases" feature can cause an
INSIST assertion failure in named
For more details, see the release notes:
https://ftp.isc.org/isc/bind9/9.11.5/RELEASE-NOTES-bind-9.11.5.html
Drop patch 0003-Rename-ptrsize-to-ptr_size.patch as the uClibc-ng issue was
fixed upstream in commit 931fd627f6195 (mips: fix clashing symbols), which
is included in uclibc-1.0.12 (January 2016).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 955df7463b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build error:
make[3]: *** No rule to make target '-lm', needed by 'traceroute'.
Fixes:
http://autobuild.buildroot.org/results/dde63672e1de1d4ba036331ab127ccc8ff044444http://autobuild.buildroot.org/results/4efb67e6a29c3dd784676d30a1051f9f0c2a6c80http://autobuild.buildroot.org/results/7ac23a3959aec22297695899c0f76dbbc4e114d3
And many more...
As explained by Arnout, this happens when host-make is built (E.G. when
glibc is built on a machine with an old make version) because the traceroute
Makefiles have a target with a dependency on -lm, and make automatically will
look in make's $prefix/lib directory for libm.so / libm.a to satisfy this
dependency. From the make info pages:
When a prerequisite's name has the form '-lNAME', 'make' handles it
specially by searching for the file 'libNAME.so', and, if it is not
found, for the file 'libNAME.a' in the current directory, in directories
specified by matching 'vpath' search paths and the 'VPATH' search path,
and then in the directories '/lib', '/usr/lib', and 'PREFIX/lib'
(normally '/usr/local/lib', but MS-DOS/MS-Windows versions of 'make'
behave as if PREFIX is defined to be the root of the DJGPP installation
tree).
Our host-make is configured with prefix=$(HOST_DIR), and $(HOST_DIR)/lib
does not contain libm.so / libm.a, causing make to error out.
Work around it by pointing VPATH to $(STAGING_DIR)/usr/lib, so make will
find the (target) libm.so / libm.a.
[Peter: extend description based on Arnouts investigation]
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 49dd099650)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported by [1], SSP support is missing in the Buildroot toolchain
for microblaze even if it's requested by selecting
BR2_TOOLCHAIN_HAS_SSP config option.
In Buildroot, we are using libssp provided by the C library (glibc,
musl, uClibc-ng) when available. We are not using libssp from gcc.
So for a microblaze glibc based toolchain, the SSP support is enabled
unconditionally by a select BR2_TOOLCHAIN_HAS_SSP.
BR2_microblazeel=y
BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
BR2_KERNEL_HEADERS_4_14=y
BR2_BINUTILS_VERSION_2_30_X=y
BR2_GCC_VERSION_8_X=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
While building the toolchain, we are building host-binutils which
provide "as" (assembler) and host-gcc-initial wich provide a
minimal cross gcc (C only cross-compiler without any C library).
When SSP support is requested, gcc_cv_libc_provides_ssp=yes is
added to the make command line (see [2] for full details)
With this setting, the SSP support is requested but it's not available
in the end and the toochain build succeed.
When the microblaze toolchain is imported to Biuldroot (2018.05) as
external toolchain with BR2_TOOLCHAIN_EXTERNAL_HAS_SSP set, the build
stop with :
"SSP support not available in this toolchain, please disable BR2_TOOLCHAIN_EXTERNAL_HAS_SSP"
The test is doing the following command line:
echo 'void main(){}' | [...]/host/bin/microblazeel-linux-gcc.br_real -Werror -fstack-protector -x c - -o [...]/build/.br-toolchain-test.tmp
cc1: error: -fstack-protector not supported for this target [-Werror]
When we look at the gcc-final log file (config.log) we can see this
error several time when using the minimal gcc (from host-gcc-initial).
So Why the minimal gcc doesn't support SSP?
When we look at the gcc-initial log file (config.log) we can see an
error with 'as':
configure:23194: checking assembler for cfi directives
configure:23209: [...]microblazeel-buildroot-linux-gnu/bin/as -o conftest.o conftest.s >&5
conftest.s: Assembler messages:
conftest.s:2: Error: CFI is not supported for this target
conftest.s:3: Error: CFI is not supported for this target
conftest.s:4: Error: CFI is not supported for this target
conftest.s:5: Error: CFI is not supported for this target
conftest.s:6: Error: CFI is not supported for this target
conftest.s:7: Error: CFI is not supported for this target
configure:23212: $? = 1
configure: failed program was
.text
.cfi_startproc
.cfi_offset 0, 0
.cfi_same_value 1
.cfi_def_cfa 1, 2
.cfi_escape 1, 2, 3, 4, 5
.cfi_endproc
This is the only relevant difference compared to a nios2 toolchain where
libssp is enabled and available (nios2 is an example).
"CFI" stand for "Control Flow Integrity" and it seems that SSP support
requires CFI target support (see [3] for some explanation).
The SSP support seems to depends on CFI support, but the toolchain
infrastructure is not detailed enough to handle the CFI dependency.
The NiosII toolchains built with binutils < 2.30 are also affected by
this issue.
This patch improve the toolchain infrastructure by adding a new
BR2_PACKAGE_HOST_BINUTILS_SUPPORTS_CFI blind option
Disable SSP support for microblaze entirely.
Disable SSP support for nios2 only with Binutils < 2.30.
Fixes:
https://gitlab.com/free-electrons/toolchains-builder/-/jobs/72006389
[1] https://gitlab.com/free-electrons/toolchains-builder/issues/1
[2] https://git.buildroot.net/buildroot/tree/package/gcc/gcc.mk?h=2018.05#n275
[3] https://grsecurity.net/rap_faq.php
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Thomas: adjust how the BR2_PACKAGE_HOST_BINUTILS_SUPPORTS_CFI option
is expressed.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 435613ef29)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We already turn on kernel features for several packages, so let's do it
for audit too, since the daemon is useless and fails to load otherwise.
Notice that we also turn NET on, since AUDIT depends on NET, like we do
for the wireguard package.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 2c828ed72f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
audit uses syslog(). Rename its init script to S02auditd to ensure that
it will start after syslogd. Otherwise the initial log messages will be
sent to the console (and probably lost, since almost nobody watches the
system console on embedded systems).
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 6fe5fe4c4d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
audispd is installed at /usr/sbin but the configuration file pointed
to /sbin, causing auditd to fail on startup.
This patch cannot be sent upstream because audispd does not exist
anymore on the master branch (it was merged to auditd).
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 4be494b804)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerabilities:
CVE-2018-3282: Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: Storage Engines). Supported versions that are
affected are 5.5.61 and prior, 5.6.41 and prior, 5.7.23 and prior and 8.0.12
and prior. Easily exploitable vulnerability allows high privileged attacker
with network access via multiple protocols to compromise MySQL Server.
Successful attacks of this vulnerability can result in unauthorized ability
to cause a hang or frequently repeatable crash (complete DOS) of MySQL
Server.
CVE-2016-9843: The crc32_big function in crc32.c in zlib 1.2.8 might allow
context-dependent attackers to have unspecified impact via vectors involving
big-endian CRC calculation.
CVE-2018-3174: Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Client programs). Supported versions that are affected are
5.5.61 and prior, 5.6.41 and prior, 5.7.23 and prior and 8.0.12 and prior.
Difficult to exploit vulnerability allows high privileged attacker with
logon to the infrastructure where MySQL Server executes to compromise MySQL
Server. While the vulnerability is in MySQL Server, attacks may
significantly impact additional products. Successful attacks of this
vulnerability can result in unauthorized ability to cause a hang or
frequently repeatable crash (complete DOS) of MySQL Server.
CVE-2018-3143: Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: InnoDB). Supported versions that are affected are 5.6.41 and
prior, 5.7.23 and prior and 8.0.12 and prior. Easily exploitable
vulnerability allows low privileged attacker with network access via
multiple protocols to compromise MySQL Server. Successful attacks of this
vulnerability can result in unauthorized ability to cause a hang or
frequently repeatable crash (complete DOS) of MySQL Server.
CVE-2018-3156: Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: InnoDB). Supported versions that are affected are 5.6.41 and
prior, 5.7.23 and prior and 8.0.12 and prior. Easily exploitable
vulnerability allows low privileged attacker with network access via
multiple protocols to compromise MySQL Server. Successful attacks of this
vulnerability can result in unauthorized ability to cause a hang or
frequently repeatable crash (complete DOS) of MySQL Server.
CVE-2018-3251: Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: InnoDB). Supported versions that are affected are 5.6.41 and
prior, 5.7.23 and prior and 8.0.12 and prior. Easily exploitable
vulnerability allows low privileged attacker with network access via
multiple protocols to compromise MySQL Server. Successful attacks of this
vulnerability can result in unauthorized ability to cause a hang or
frequently repeatable crash (complete DOS) of MySQL Server.
The README has gotten a few extra URLs added, so update the sha256 to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Unbreaks builds without BR2_PACKAGE_MARIADB_SERVER as this only gets
installed if the server is enabled.
As pointed out in commit 2b82e014b4 (package/mariadb: bump version to
10.3.10), this file has been removed upstream in newer versions as it hasn't
been updated in >8 years and the compiled in defaults are sensible, so
completely remove the file handling instead of adding logic to only install
it if the server is enabled.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some packages have archive name that is different from package name.
For example websocket-client's archive name is websocket_client-*.tar.gz.
scanpypi expects the temporary extract folder to be:
/tmp-folder/BR-package-name/PyPI-packagename-and-version
In the case of websocket-client package the real extraction folder
will be different from the expected one because of the '_' in the
archive file name.
Use archive file name instead of package name to specify the extraction
folder. As the version is already part of this file, we don't need to
specify it.
Bonus: remove obsolete "return None, None" as the function doesn't return
anything. OSError class doesn't provide "message" member, so replace it
with "strerror".
Fixes:
https://bugs.busybox.net/show_bug.cgi?id=11251
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit fd29797f65)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
external.desc must be present when using a br2-external tree. The
documentation notes this later in the text, but the file is missing
from the initial overview of files.
Fixes bug #11481.
Signed-off-by: Philipp Wagner <mail@philipp-wagner.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a6479d6058)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Suppose we use Makefile wrapper and build some project out of
buildroot tree (O=...). A command like "make
busybox-all-external-deps" will output the string "uname 022 && make
..." to stdout before the usefull information. It pollutes stdout. At
the same time if we use the same command in the buildroot source-tree
then we don't get the additional output. This patch makes wrapper
silent by default. People who prefer to see more verbose output can
use V=1.
Signed-off-by: Serj Kalichev <serj.kalichev@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c77cd17082)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
CVE-2018-16850: SQL injection in pg_upgrade and pg_dump, via CREATE TRIGGER
... REFERENCING
For more details, see the advisory:
https://www.postgresql.org/about/news/1905/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Release notes:
https://webkitgtk.org/2018/10/29/webkitgtk2.22.3-released.html
Patch "0001-ARM-Building-FELightingNEON.cpp-fails-due-to-missing.patch"
is removed because it is included in the new release.
This is a maintenance release which further improves playback of video
when using media source extensions (MSE), specially for WebM content,
and provides a few correctness fixes.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 0def20865d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
NetworkManager includes some parts of the systemd-networkd code in its
codebase. That can be found at src/systemd/src/libsystemd-networkd.
The DHCP implementation provided by systemd-networkd is used when
NetworkManager is configured to use the internal implementation,
however the default is to use dhclient.
When NetworkManager is configured to use the internal dhcp and an
interface is setup with ipv6.method=auto (which is the default value)
or ipv6.method=dhcp, this flaw can be exploited. When using
ipv6.method=auto, the DHCPv6 client can be automatically started with a
Router Advertisement packet.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 0a51ba655c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The "development" defconfigs for Atmel platforms enable both OpenSSH
and Dropbear, which doesn't make a lot of sense, as only one SSH
server can start on port 22.
This commit therefore drops BR2_PACKAGE_DROPBEAR=y from those
defconfigs, keeping OpenSSH as an SSH server/client, as was requested
by Atmel/Microchip folks in the review of an earlier version of this
patch [1]. Since those defconfigs are "development" defconfigs, they
are not meant to be minimal, and already provide an arbitrary set of
packages, so using openssh is just as good as using dropbear in this
case.
[1] https://patchwork.ozlabs.org/patch/989516/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Joshua Henderson <joshua.henderson@microchip.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit dab1539613)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Systemd-networkd is vulnerable to an out out-of-bounds heap write in the
DHCPv6 client when handling options sent by network adjacent DHCP servers.
A attacker could exploit this via malicious DHCP server to corrupt heap
memory on client machines, resulting in a denial of service or potential
code execution.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Peter: add description]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit bc6ecbbeef)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
1.4.50:
[mod_alias] security: potential path traversal with specific configs
[core] security: use-after-free invalid Range req
[mod_alias] security: path traversal in mod_alias (in some use cases) (fixes#2898)
[core] security: use-after-free after invalid Range request (fixes#2899)
1.4.51:
[core,security] process headers after combining folded headers
[mod_userdir] security: skip username “.” and “..”
1.4.51 brings optional pam and wolfssl support. Explicitly disable these
options for now.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 15793bc19f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 916b21a7fb ("package/tar:
Depends on MMU"), BR2_PACKAGE_TAR depends on BR2_USE_MMU. However, the
Config.in comment does not take into account this dependency, an
inconsistency which is fixed by this commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 2a3ef05520)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The new version, among other changes, includes important fixes
for unaligned memory access on ARM (both for 32 and 64-bit), as well
as performance improvements and build fixes.
Patch "0001-Tell-CMake-to-not-check-for-a-C-compiler.patch" is not
needed due to the issue being fixed upstream, and therefore is removed.
Patch "0001-CMake-Allow-using-BUILD_SHARED_LIBS-to-choose-static.patch"
is rebased against the latest upstream changes.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit be733b54a7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Incorrect command-line parameter validation in the Xorg X server can
lead to privilege elevation and/or arbitrary files overwrite, when the
X server is running with elevated privileges (ie when Xorg is
installed with the setuid bit set and started by a non-root user).
The -modulepath argument can be used to specify an insecure path to
modules that are going to be loaded in the X server, allowing to
execute unprivileged code in the privileged process.
The -logfile argument can be used to overwrite arbitrary files in the
file system, due to incorrect checks in the parsing of the option.
For more details, see the advisory:
https://lists.x.org/archives/xorg-announce/2018-October/002927.html
Issue was introduced in 1.19.0, so the older xserver variants are not
affected.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the runtime tests were first introduced, they still ran pretty
quickly. Nowadays, however, there are a lot of runtime tests, and some
of them take a really long time. So running them on every push is
really too much.
Just like we do for the defconfigs, run them on explicit trigger only.
The explicit trigger is now done every week, but it can be increased
to e.g. twice or three times per week.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 96123c1c4f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-10-26 21:38:10 +02:00
138 changed files with 1824 additions and 666 deletions
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Peter Korsgaard