The event wouldn't be on any list at this point, so nothing to delete
it from.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Also, slightly changes the behavior to always put the vblank irq,
even if userspace did not request a vblank event. As far as I
can tell, the previous code would leak a vblank irq refcnt if
userspace requested a pageflip without event.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We never really clarified if unmap could be done in atomic context.
But since mapping might require sleeping, this implies mutex in use
to synchronize mapping/unmapping, so unmap could sleep as well. Add
a might_sleep() to clarify this.
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Replace references to and remove the connector property fxns, which
have been superseded with the more general object property fxns:
+ drm_connector_attach_property -> drm_object_attach_property
+ drm_connector_property_set_value -> drm_object_property_set_value
+ drm_connector_property_get_value -> drm_object_property_get_value
Signed-off-by: Rob Clark <rob@ti.com>
A helper that drivers can use to send vblank event after a pageflip.
If the driver doesn't support proper vblank irq based time/seqn then
just pass -1 for the pipe # to get do_gettimestamp() behavior (since
there are a lot of drivers that don't use drm_vblank_count_and_time())
Also an internal send_vblank_event() helper for the various other code
paths within drm_irq that also need to send vblank events.
v1: original
v2: add back 'vblwait->reply.sequence = seq' which should not have
been deleted
v3: add WARN_ON() in case lock is not held and comments
v4: use WARN_ON_SMP() instead to fix issue with !SMP && !DEBUG_SPINLOCK
as pointed out by Marcin Slusarz
v5: update docbook
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Exynos does not seem to have any dependency on anything from
platform headers so just needs Kconfig updated to build in
ARCH_MULTIPLATFORM builds.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
No dependency on plat headers, so only needs Kconfig update to
build for ARCH_MULTIPLATFORM.
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove usage of plat/cpu.h and get information from platform data
instead. This enables omapdrm to be built with ARCH_MULTIPLATFORM.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For hardware that does not have DMM/TILER, there is no rotation,
so no point in getting userspace's hopes up.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the fb is detached from one CRTC/plane, paddr was set back to
zero. But really we don't want to do this because the fb could still
be attached to other CRTC/plane(s). This originally worked like this
to catch cases of freeing a pinned fb (but with the refcnt'ing this
should no longer be needed). Also, there is checking in the GEM code
for freeing a pinned GEM object, so this extra level of checking is
redundant.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously read-only KMS ioctls had some somewhat inconsistent settings
regarding whether mastership was required. For example, GETRESOURCES
did not require master, but GETPLANERESOURCES, GETPROPERTY, etc. did.
At least for debugging, it is nice to be able to use modetest to dump
property values while another process is master, and there seems to
be no harm in allowing read-only access to the KMS state to other
processes.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
For drivers that can support rotated scanout, the extra parameter
checking in drm-core, while nice, tends to get confused. To solve
this drivers can set the crtc or plane invert_dimensions field so
that the dimension checking takes into account the rotation that
the driver is performing.
v1: original
v2: remove invert_dimensions from plane, at Ville's suggestion.
Userspace can give rotated src coordinates, so invert_dimensions
is not required for planes.
Signed-off-by: Rob Clark <rob@ti.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This simplifies drm fb lifetime, and if the crtc/plane needs to hold
a ref to the fb when disabling a pipe until the next vblank, this
avoids the need to make disabling an overlay synchronous. This is a
problem that shows up when userspace is using a drm plane to
implement a hw cursor.. making overlay disable synchronous causes
a performance problem when x11 is rapidly enabling/disabling the
hw cursor. But not making it synchronous opens up a race condition
for crashing if userspace turns around and immediately deletes the
fb. Refcnt'ing the fb makes it possible to solve this problem.
v1: original
v2: add drm_framebuffer_remove() which is called in all paths where
fb->funcs->destroy() was directly called before. This cleans
up the CRTCs/planes that the fb was attached to. You should
only directly use drm_framebuffer_unreference() if you are also
using drm_framebuffer_reference() to keep a ref to the fb.
v3: add comment explaining the fb refcount
v4: remove duplicate 'list_del(&fb->filp_head)'
[airlied: v4.1: fix local rejection]
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Since the plane hasn't yet taken a reference, we need to hold a
reference while waiting to ensure the backing GEM bo doesn't get
freed from under us.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'struct omap_video_timings' was updated w/ a 'bool interlaced'. Without
a matching update in omap_connector, this field could have undefined
values from the stack, which isn't quite ideal.
Update the fxns to convert omapdss<->drm timings structs, and zero-init
'struct omap_video_timings' when it is declared on stack to avoid issues
like this in the future.
Signed-off-by: Rob Clark <rob@ti.com>
Reviewed-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If rotated 90 or 270, we need to invert the dimensions used by drm
core for calculating if the dimensions of an attached fb are correct.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use tiled buffers for rotated/reflected scanout, with CRTC and plane
properties as the interface for userspace to configure rotation.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The omapdrm driver uses this for setting per-overlay rotation. It
is likely also useful for setting YUV->RGB colorspace conversion
matrix, etc.
Signed-off-by: Rob Clark <rob@ti.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
A bitmask property is similar to an enum. The enum value is a bit
position (0-63), and valid property values consist of a mask of
zero or more of (1 << enum_val[n]).
[airlied: 1LL -> 1ULL]
Signed-off-by: Rob Clark <rob@ti.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds support to re-import omapdrm's own buffers. Importing buffers
allocated by other drivers can be added later, but for now is not needed
(we don't yet have any other exportering drivers to test with).
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for mmap'ing buffers via dmabuf. For handling mmap of
cached buffers correctly, fault handling and PTE shootdown are used
to track dirty pages and automagically handle cache flushes before
dma access to the buffer.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously these functions would assume that vma->vm_file was the
drm_file. Although if in some cases if the drm driver needs to use
something else for the backing file (such as the tmpfs filp) then this
assumption is no longer true. But vma->vm_private_data is still the
GEM object.
With this change, now the drm_device comes from the GEM object rather
than the drm_file so the driver is more free to play with vma->vm_file.
The scenario where this comes up is for mmap'ing of cached dmabuf's
for non-coherent systems, where the driver needs to use fault handling
and PTE shootdown to simulate coherency. We can't use the vma->vm_file
of the dmabuf, which is using anon_inode's address_space. The most
straightforward thing to do is to use the GEM object's obj->filp for
vma->vm_file in all cases, for which we need this patch.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
For now just implementing the exporting APIs, not yet importing. And
kmap is rejected on tiled buffers (although the usefulness of that seems
questionable, but could be added later if needed).
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Not sure what triggered the change in behavior, but seems to
result in recursively acquiring a mutex and hanging on boot. But
omap_drm_init() seems a much more sane place to register the
driver for the DMM sub-device.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Otherwise subsystems will get this wrong and end up with a second
export ioctl with the flag and O_CLOEXEC support added.
Signed-off-by: Rob Clark <rob@ti.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Works in a similar way to get_file(), and is needed in cases such as
when the exporter needs to also keep a reference to the dmabuf (that
is later released with a dma_buf_put()), and possibly other similar
cases.
Signed-off-by: Rob Clark <rob@ti.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Because we don't have vblank hooked up via drm_irq (which is a bit
awkward due to separation between omapdss (which knows the irq #)
and omapdrm, for now use gettimeofday to have a semi-sane timestamp
in the page-flip event. Otherwise apps like weston drm compositor,
which use the timestamp in it's animations, get highly confused.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The endwin irq indicates that DSS has finished scanning out a buffer.
Use this to trigger page-flip event to userspace, so this happens
only *after* the previous buffer is finished.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Multiple video pipes on same output with same z-order is an undefined
behavior. Set a unique z-order value based on overlay number/id.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Deal with the case of buffers with virtual stride larger than one
page in fault_2d().
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add some additional debugfs file to aid in tracking buffer usage.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When flipping, defer unpinning until scanout completes, as indicated
by the appropriate END_WIN irq.
This also re-organizes things a bit, in replacing omap_fb_{pin,unpin}
with omap_fb_replace(), to make it easier to add support for scanout
synchronized DMM refill mode (flipping by just reprogramming DMM
synchronized with DSS scanout).
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that 'struct drm_plane' has a pixel_format field, use that. And
fix a minor typo.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If fbcon calls us from atomic context, push the work off to the
workqueue to avoid calling into the gem/dmm code in an atomic
context.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a workqueue for omapdrm driver, which is needed for at least a
couple things currently: (1) moving omap_gem_roll() to a non-atomic
context, (2) synchronizing page flips w/ DSS scanout related irq's
(in particular not unmapping previous buffer until DSS finishes
scanout).
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Get the supported formats for a plane from ovl's supported_modes
bitmask.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If there are not multiple instances of a platform device, the id
should apparently be set to -1. Which results in a odd looking
bus-id like "platform:foodrm:-1". Probably we should just treat
this case as id 0.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The "OMAPDSS: HDMI: PHY burnout fix" commit switched the HDMI driver
over to using a GPIO for plug detect. Unfortunately the ->detect()
method was not also updated, causing HDMI to no longer work for the
omapdrm driver (because it would actually check if a connection was
detected before attempting to enable display).
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The create/free mmap offset code must be synchronized. Yet only some
callers of omap_gem_mmap_offset() held struct_mutex. Leading to various
crashes around drm_mm_insert_helper_range(). (In the free-object path,
which is currently the only place we drm_gem_free_mmap_offset(),
struct_mutex is already held.)
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix minimum width/height so planes could be used to implement
hw mouse cursor.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add support in framebuffer objects for other color formats and multi-
planar YUV (NV12). Since this requires changing the API between the
plane and fb for getting scanout information (paddr, etc), take
advantage of the opportunity and put in place a way to allow fb's to
be unpinned when they are not being scanned out. Now, before start
of scanout the plane calls omap_framebuffer_pin() which takes care
to pin all the backing bo's, then omap_framebuffer_update_scanout()
however many times to update the scanout address(es), etc, and then
when finished omap_framebuffer_unpin().
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Because framebuffer layer and overlay scanout video pipes are basically
thing in OMAP display subsystem (the only difference being that the first
video pipe does not support scaling or YUV formats), much of the CRTC
code is pulled into the plane implementation, and a private plane object
is used by the CRTC object. This avoids code duplication between the
plane and CRTC.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Update to reflect changes in:
"drm: add an fb creation ioctl that takes a pixel format v5"
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Update to reflect changes in:
"Make the per-driver file_operations struct const"
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In cases where the scanout hw is sufficiently similar between "overlay"
and traditional crtc layers, it might be convenient to allow the driver
to create internal drm_plane helper objects used by the drm_crtc
implementation, rather than duplicate code between the plane and crtc.
A private plane is not exposed to userspace.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Since plane->fb and plane->crtc are set in drm_mode_setplane()
after update_plane(), They should be cleared after disable().
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
extra_info_update_ongoing() goes through all overlays, but doesn't check
if the overlay is connected to a manager. This leads to a crash whenever
an overlay has been detached.
Add a check to skip the non-connected overlays.
Reported-by: Rob Clark <rob@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The dispc's error handler tries to disable all outputs when OCP_ERR
happens. However, the code doesn't check if there actually is a display
on each particular output, nor if there's a driver for the display. This
may lead to NULL pointer reference.
Signed-off-by: Rob Clark <rob@ti.com>
[tomi.valkeinen@ti.com: added patch description]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Uncached/writecombine buffers need to be clean before creating uc/wc
userspace mappings, lest dirty cache lines fall down and corrupt the
contents of the buffer.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Call connector->funcs->dpms(DPMS_ON) rather than just setting
connector->dpms = DPMS_ON. This ensures that if the connector
has something to do to enable the output (rather than just using
drm_helper_connector_dpms helper directly), that this happens
at bootup. This solves an issue with connectors not getting
enabled from fbcon_init() when the driver is loaded.
Signed-off-by: Rob Clark <rob@ti.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
omap_gem_roll() could be called by fbcon in atomic context or when
struct_mutext is held. Avoid aquiring mutex (deadlock), or calling
tiler_pin() (which itself is not safe for atomic context) in these
cases.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Can be set at boot or module load time to prevent YWRAP scrolling from
being enabled.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add support for YWRAP scrolling by shuffling pages around in DMM
instead of sw blits.
Note that fbcon only utilizes this mode if the y resolution is
divided evenly by the font height. So, for example, a 1920x1080
display using a 16 pixel tall font will not utilize this, but a
1280x1024 display would.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
TILER/DMM provides two features for omapdrm GEM objects:
1) providing a physically contiguous view to discontiguous memory
for hw initiators that cannot otherwise support discontiguous
buffers (DSS scanout, IVAHD video decode/encode, etc)
2) providing untiling for 2d tiled buffers, which are used in some
cases to provide rotation and reduce memory bandwidth for hw
initiators that tend to access data in 2d block patterns.
For 2d tiled buffers, there are some additional complications when
it comes to userspace mmap'ings. For non-tiled buffers, the original
(potentially physically discontiguous) pages are used to back the
mmap. For tiled buffers, we need to mmap via the tiler/dmm region to
provide an unswizzled view of the buffer. But (a) the buffer is not
necessarily pinned in TILER all the time (it can be unmapped when
there is no DMA access to the buffer), and (b) when they are they
are pinned, they not necessarily page aligned from the perspective of
the CPU. And non-page aligned userspace buffer mapping is evil.
To solve this, we reserve one or more small regions in each of the 2d
containers when the driver is loaded to use as a "user-GART" where we
can create a second page-aligned mapping of parts of the buffer being
accessed from userspace. Page faulting is used to evict and remap
different regions of whichever buffers are being accessed from user-
space.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If an older userspace passes in a smaller arg than the current kernel
ioctl arg struct, then extra fields should be initialized to zero
rather than passing random data to the DRM driver.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Include the device id in the bus-id to give userspace a way to open
the correct "cardN" when there are multiple device instances.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If there is an alpha channel, need to mask in 1's in the alpha channel
to prevent the fb from being completely transparent.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
keventd_wq is a shared work-queue, and should not be used when we
need fast deterministic response. Instead mailbox driver should
use it's own private work-queue, with it's own thread, to ensure
that handling of RX interrupts are not delayed by other drivers.
The tasklet is still used for transmission of mbox messages.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: C A Subramaniam <subramaniam.ca@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Rob Clark