ARM: dts: stm32: Drop redundant status=okay

Device nodes are enabled by default, so remove confusing or duplicated
enabling of few nodes.  No practical impact, verified with dtx_diff.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Marek Vasut <marek.vasut@mailbox.org>
Link: https://lore.kernel.org/r/20250818143730.244379-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
This commit is contained in:
Krzysztof Kozlowski
2025-09-03 09:50:44 +02:00
committed by Alexandre Torgue
parent 3f22650781
commit 4952fb7f53
5 changed files with 0 additions and 10 deletions
-2
View File
@@ -45,7 +45,6 @@
reg = <0>;
reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
power-supply = <&v3v3>;
status = "okay";
port {
panel_in: endpoint {
@@ -71,7 +70,6 @@
interrupt-parent = <&gpiof>;
touchscreen-size-x = <480>;
touchscreen-size-y = <800>;
status = "okay";
};
};
-2
View File
@@ -51,7 +51,6 @@
reg = <0>;
reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
power-supply = <&scmi_v3v3>;
status = "okay";
port {
panel_in: endpoint {
@@ -77,7 +76,6 @@
interrupt-parent = <&gpiof>;
touchscreen-size-x = <480>;
touchscreen-size-y = <800>;
status = "okay";
};
};
@@ -62,7 +62,6 @@
pinctrl-0 = <&i2c2_pins_a>;
i2c-scl-rising-time-ns = <185>;
i2c-scl-falling-time-ns = <20>;
status = "okay";
/* spare dmas for other usage */
/delete-property/dmas;
/delete-property/dma-names;
@@ -20,7 +20,6 @@
default-brightness-level = <8>;
enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
power-supply = <&reg_panel_bl>;
status = "okay";
};
gpio-keys-polled {
@@ -135,7 +134,6 @@
"MIC_IN", "Microphone Jack",
"Microphone Jack", "Mic Bias";
dais = <&sai2a_port &sai2b_port>;
status = "okay";
};
};
@@ -150,7 +148,6 @@
pinctrl-0 = <&i2c2_pins_a>;
i2c-scl-rising-time-ns = <185>;
i2c-scl-falling-time-ns = <20>;
status = "okay";
/* spare dmas for other usage */
/delete-property/dmas;
/delete-property/dma-names;
@@ -269,7 +269,6 @@
interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
status = "okay";
regulators {
compatible = "st,stpmic1-regulators";
@@ -388,7 +387,6 @@
interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
interrupt-names = "onkey-falling", "onkey-rising";
power-off-time-sec = <10>;
status = "okay";
};
watchdog {