Re-create docs.

These entries can be removed from the whitelist by adding any
whitelist entry to the config file. If you add any entry, you
must repeat these in order to have them included, otherwise those
entries are not added to the custom list.

configure.ac

@@ -2,7 +2,7 @@
 # Process this file with autoconf to produce a configure script.
 
 AC_PREREQ([2.64])
-AC_INIT([tallow], [8], [auke-jan.h.kok@intel.com])
+AC_INIT([tallow], [14], [auke-jan.h.kok@intel.com])
 AM_INIT_AUTOMAKE([foreign])
 AC_CONFIG_FILES([Makefile])
 

tallow.1

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "TALLOW" "1" "January 2018" "" ""
+.TH "TALLOW" "1" "October 2018" "" ""
 .
 .SH "NAME"
 \fBtallow\fR
@@ -28,7 +28,7 @@ Care should be taken to assure that legitimate users are not blocked inadvertent
 The \fBtallow\fR daemon itself has no runtime configuration\. All configuration is done through the tallow\.conf(5) config file\.
 .
 .SH "SIGNALS"
-The \fBUSR1\fR signal causes \fBtallow\fR to print out it\'s internal tracking table of IP addresses\.
+The \fBUSR1\fR signal causes \fBtallow\fR to print out it\'s internal tracking table of IP addresses\. This requires that tallow is compiled with the \fB\-DDEBUG=1\fR symbol passed to the compiler\.
 .
 .SH "SEE ALSO"
 systemd\-journald(1), iptables(1), ipset(1), tallow\.conf(5)

tallow.1.md

@@ -43,7 +43,8 @@ configuration is done through the tallow.conf(5) config file.
 ## SIGNALS
 
 The `USR1` signal causes `tallow` to print out it's internal tracking
-table of IP addresses.
+table of IP addresses. This requires that tallow is compiled with
+the `-DDEBUG=1` symbol passed to the compiler.
 
 ## SEE ALSO
 

tallow.c

@@ -58,15 +58,15 @@ struct pattern_struct {
 
 #define PATTERN_COUNT 10
 static struct pattern_struct patterns[PATTERN_COUNT] = {
-	{ 0, 0.4, "MESSAGE=Failed .* for .* from ([0-9a-z:.]+) port \\d+ ssh2", NULL},
-	{ 0, 0.4, "MESSAGE=error: PAM: Authentication failure for .* from ([0-9a-z:.]+)", NULL},
-	{15, 0.3, "MESSAGE=Invalid user .* from ([0-9a-z:.]+) port \\d+", NULL},
-	{15, 0.3, "MESSAGE=Did not receive identification string from ([0-9a-z:.]+) port \\d+", NULL},
-	{30, 0.3, "MESSAGE=Failed .* for root from ([0-9a-z:.]+) port \\d+ ssh2", NULL},
-	{15, 0.6, "MESSAGE=Bad protocol version identification .* from ([0-9a-z:.]+)", NULL},
-	{15, 0.6, "MESSAGE=Connection closed by authenticating user .* ([0-9a-z:.]+) port \\d+", NULL},
-	{15, 0.6, "MESSAGE=Received disconnect from ([0-9a-z:.]+) port .*\\[preauth\\]", NULL},
-	{15, 0.6, "MESSAGE=Connection closed by ([0-9a-z:.]+) port .*\\[preauth\\]", NULL},
+	{ 0, 0.2, "MESSAGE=Failed .* for .* from ([0-9a-z:.]+) port \\d+ ssh2", NULL},
+	{ 0, 0.2, "MESSAGE=error: PAM: Authentication failure for .* from ([0-9a-z:.]+)", NULL},
+	{10, 0.2, "MESSAGE=Invalid user .* from ([0-9a-z:.]+) port \\d+", NULL},
+	{10, 0.3, "MESSAGE=Did not receive identification string from ([0-9a-z:.]+) port \\d+", NULL},
+	{15, 0.4, "MESSAGE=Bad protocol version identification .* from ([0-9a-z:.]+)", NULL},
+	{15, 0.4, "MESSAGE=Connection closed by authenticating user .* ([0-9a-z:.]+) port \\d+", NULL},
+	{10, 0.3, "MESSAGE=Received disconnect from ([0-9a-z:.]+) port .*\\[preauth\\]", NULL},
+	{10, 0.3, "MESSAGE=Connection closed by ([0-9a-z:.]+) port .*\\[preauth\\]", NULL},
+	{30, 0.5, "MESSAGE=Failed .* for root from ([0-9a-z:.]+) port \\d+ ssh2", NULL},
 	{60, 0.6, "MESSAGE=Unable to negotiate with ([0-9a-z:.]+) port \\d+: no matching key exchange method found.", NULL}
 };
 
@@ -284,23 +284,7 @@ static void find(const char *ip, float weight, int instant_block)
 	return;
 }
 
-static void sig(int u __attribute__ ((unused)))
-{
-	fprintf(stderr, "Exiting on request.\n");
-	sd_journal_close(j);
-
-	struct tallow_struct *s = head;
-	while (s) {
-		struct tallow_struct *n = NULL;
-
-		free(s->ip);
-		n = s;
-		s = s->next;
-		free(n);
-	}
-	exit(EXIT_SUCCESS);
-}
-
+#ifdef DEBUG
 static void sigusr1(int u __attribute__ ((unused)))
 {
 	fprintf(stderr, "Dumping score list on request:\n");
@@ -310,6 +294,7 @@ static void sigusr1(int u __attribute__ ((unused)))
 		s = s->next;
 	}
 }
+#endif
 
 static void prune(void)
 {
@@ -354,20 +339,17 @@ int main(void)
 {
 	int r;
 	FILE *f;
-	struct sigaction s;
 	int timeout = 60;
 
 	strcpy(ipt_path, "/usr/sbin");
 
-	memset(&s, 0, sizeof(struct sigaction));
-	s.sa_handler = sig;
-	sigaction(SIGHUP, &s, NULL);
-	sigaction(SIGTERM, &s, NULL);
-	sigaction(SIGINT, &s, NULL);
+#ifdef DEBUG
+	struct sigaction s;
 
 	memset(&s, 0, sizeof(struct sigaction));
 	s.sa_handler = sigusr1;
 	sigaction(SIGUSR1, &s, NULL);
+#endif
 
 	if (access("/proc/sys/net/ipv6", R_OK | X_OK) == 0)
 		has_ipv6 = 1;
@@ -412,8 +394,11 @@ int main(void)
 	if (!has_ipv6)
 		fprintf(stdout, "ipv6 support disabled.\n");
 
-	if (!whitelist)
+	if (!whitelist) {
 		whitelist_add("127.0.0.1");
+		whitelist_add("192.168.");
+		whitelist_add("10.");
+	}
 
 	r = sd_journal_open(&j, SD_JOURNAL_LOCAL_ONLY);
 	if (r < 0) {
@@ -452,6 +437,9 @@ int main(void)
 		if (r == SD_JOURNAL_INVALIDATE) {
 			fprintf(stderr, "Journal was rotated, resetting\n");
 			sd_journal_seek_tail(j);
+		} else if (r == SD_JOURNAL_NOP) {
+			dbg("Timeout reached, waiting again\n");
+			continue;
 		}
 
 		while (sd_journal_next(j) != 0) {
@@ -459,7 +447,7 @@ int main(void)
 
 			if (sd_journal_get_data(j, "MESSAGE", &d, &l) < 0) {
 				fprintf(stderr, "Failed to read message field: %s\n", strerror(-r));
-				continue;
+				break;
 			}
 
 			m = strndup(d, l+1);

tallow.conf.5

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "TALLOW" "5" "January 2018" "" ""
+.TH "TALLOW" "5" "October 2018" "" ""
 .
 .SH "NAME"
 \fBtallow\fR
@@ -25,13 +25,13 @@ This file is read on startup by the tallow(1) daemon, and can be used to provide
 \fBexpires\fR=\fB<int>\fR The number of seconds that IP addresses are blocked for\. Note that due to the implementation, IP addresses may be blocked for much longer than this period\. If IP addresses are seen, but not blocked within this period, they are also removed from the watch list\. Defaults to 3600s\.
 .
 .P
-\fBwhitelist\fR=\fB<ip address|pattern>\fR Specify an IP address or \fBpattern\fR that should never be blocked\. Multiple IP addresses can be included by repeating the \fBwhitelist\fR option several times\. By default, only 127\.0\.0\.1 is whitelisted\.
+\fBwhitelist\fR=\fB<ip address|pattern>\fR Specify an IP address or \fBpattern\fR that should never be blocked\. Multiple IP addresses can be included by repeating the \fBwhitelist\fR option several times\. By default, 127\.0\.0\.1, 192\.168\., and 10\. are whitelisted\. If you create a manual whitelist, you must include these entries if you want to continue them to be whitelisted as well, otherwise they will be omitted from the whitelist\.
 .
 .P
 If the last character of the listed ip adress is a \fB\.\fR or a \fB:\fR, then the matching is only performed on the leftmost characters of an IP address against the whitelist entry\. For instance, if you whitelist \fB10\.\fR then all IP addresses in the \fB10/8\fR subnet mask will match this whitelist entry and never be blocked\.
 .
 .P
-\fBipv6\fR=\fB<0|1>\fR Enable of disable ipv6 (ip6tables) support\. Ipv6 is disabled automatically on systems that do not appear to have ipv6 support and enabled when ipv6 is present\. Use this option to explicitly disable ipv6 support if your system does not have ipv6 or is missing ip6tables\. Even with ipv6 disabled, tallow will track and log ipv6 addresses\.
+\fBipv6\fR=\fB<0|1>\fR Enable or disable ipv6 (ip6tables) support\. Ipv6 is disabled automatically on systems that do not appear to have ipv6 support and enabled when ipv6 is present\. Use this option to explicitly disable ipv6 support if your system does not have ipv6 or is missing ip6tables\. Even with ipv6 disabled, tallow will track and log ipv6 addresses\.
 .
 .P
 \fBnocreate\fR=\fB<0|1>\fR Disable the creation of iptables rules and ipset sets\. By default, tallow will create new iptables(1) and ip6tables(1) rules when needed automatically\. If set to \fB1\fR, \fBtallow(1)\fR will not create any new iptables rules or ipset sets to work\. You should create them manually before tallow starts up and remove them afterwards\. To create them manually, you can use the following commands:

tallow.conf.5.md

@@ -33,8 +33,10 @@ watch list. Defaults to 3600s.
 `whitelist`=`<ip address|pattern>`
 Specify an IP address or `pattern` that should never be
 blocked. Multiple IP addresses can be included by repeating the
-`whitelist` option several times. By default, only 127.0.0.1 is
-whitelisted.
+`whitelist` option several times. By default, 127.0.0.1, 192.168., and
+10. are whitelisted. If you create a manual whitelist, you must include
+these entries if you want to continue them to be whitelisted as
+well, otherwise they will be omitted from the whitelist.
 
 If the last character of the listed ip adress is a `.` or a `:`, then
 the matching is only performed on the leftmost characters of an IP
@@ -43,7 +45,7 @@ address against the whitelist entry. For instance, if you whitelist
 whitelist entry and never be blocked.
 
 `ipv6`=`<0|1>`
-Enable of disable ipv6 (ip6tables) support. Ipv6 is disabled
+Enable or disable ipv6 (ip6tables) support. Ipv6 is disabled
 automatically on systems that do not appear to have ipv6 support
 and enabled when ipv6 is present. Use this option to explicitly
 disable ipv6 support if your system does not have ipv6 or is