Update packages file for version 38380

Signed-off-by: clrbuilder <clrbuilder@intel.com>

Makefile.common

@@ -20,12 +20,15 @@ LATEST_RPMS = $(wildcard rpms/*.rpm)
 DEBUGINFO_RPM = $(wildcard rpms/${PKG_NAME}-debuginfo-$(shell $(call queryspec,%{V}-%{R},${SPECFILE})).*.rpm)
 RPMS ?= $(LATEST_RPMS)
 
-WITH_SUDO = $(shell cmp /usr/bin/mock /usr/sbin/mock &> /dev/null && echo sudo )
+WITH_SUDO = sudo
 
 # MOCK_CONFIG_VAL is set in Makefile.shared
 MOCK_SMP_FLAGS=$(patsubst -j%, -D_smp_mflags\ -j%,$(filter -j%, $(MAKEFLAGS)))
 MOCK ?= $(WITH_SUDO) /usr/bin/mock -r $(MOCK_CONFIG_VAL) $(MOCK_SMP_FLAGS) $(MOCK_OPTS)
 
+MOCK_CLEANUP_OPT := $(if $(CLEANUP),--cleanup-after,--no-cleanup-after)
+AUTOSPEC_CLEANUP_OPT := $(if $(CLEANUP),-C)
+
 ifneq ($(wildcard upstream),)
 __allsources := $(notdir $(strip $(shell cat upstream)))
 __missingsources := $(filter-out $(wildcard ${__allsources}), ${__allsources})
@@ -71,7 +74,7 @@ mockproper:
 	$(MOCK) --clean --uniqueext=$(PKG_NAME)
 
 configemail:
-	@test -d .git || git init
+	@test -d .git || git init -b main
 	@$(call subjectprefix,$(PKG_NAME))
 	@echo -n "Subject prefix email configured to: "
 	@git config --get format.subjectPrefix
@@ -88,7 +91,7 @@ prebuild-checks:
 #help which creates a src.rpm file from the spec file.
 #help Use MOCK_OPTS environment varible to pass down arbitrary mock options.
 build: prebuild-checks configemail $(SPECFILE) upstream $(SRPMFILE)
-	$(MOCK) $(SRPMFILE) --result=results/ --no-cleanup-after --uniqueext=$(PKG_NAME)
+	$(MOCK) $(SRPMFILE) --result=results/ $(MOCK_CLEANUP_OPT) --uniqueext=$(PKG_NAME)
 	$(MAKE) link-new-rpms PKG_REPO_DIR="."
 	@perl $(TOPLVL)/projects/common/logcheck.pl results/build.log
 	@perl $(TOPLVL)/projects/common/count.pl results/build.log &> testresults
@@ -96,7 +99,7 @@ build: prebuild-checks configemail $(SPECFILE) upstream $(SRPMFILE)
 
 #help build-nocheck: Same as 'make build', but do not run the package's test suite.
 build-nocheck: configemail $(SPECFILE) upstream $(SRPMFILE)
-	$(MOCK) $(SRPMFILE) --nocheck --result=results/ --no-cleanup-after --uniqueext=$(PKG_NAME)
+	$(MOCK) $(SRPMFILE) --nocheck --result=results/ $(MOCK_CLEANUP_OPT) --uniqueext=$(PKG_NAME)
 	$(MAKE) link-new-rpms PKG_REPO_DIR="."
 	@perl $(TOPLVL)/projects/common/logcheck.pl results/build.log
 	@perl $(TOPLVL)/projects/common/count.pl results/build.log &> testresults
@@ -117,7 +120,7 @@ shell:
 .PHONY: $(SRPMFILE)
 $(SRPMFILE): $(SPECFILE) $(__allsources) localreponotice clean-old-content
 	@$(MAKE) spdxcheck
-	$(MOCK) --buildsrpm --source=./ --spec=$(SPECFILE) --result=results/ --no-cleanup-after --uniqueext=$(PKG_NAME)
+	$(MOCK) --buildsrpm --source=./ --spec=$(SPECFILE) --result=results/ $(MOCK_CLEANUP_OPT) --uniqueext=$(PKG_NAME)
 	mv results/root.log results/srpm-root.log
 	mv results/build.log results/srpm-build.log
 
@@ -129,7 +132,7 @@ $(SRPMFILE): $(SPECFILE) $(__allsources) localreponotice clean-old-content
 # initialized locally, or if the remote contains no commits.
 pullrebase:
 	@if [ -z "$$SKIP_GIT" ] && [ -e .git ]; then \
-		if ! git rev-parse --verify --quiet origin/master > /dev/null; then \
+		if ! git rev-parse --verify --quiet origin/main > /dev/null; then \
 			echo "Remote not yet initialized. Continuing."; \
 			exit 0; \
 		fi; \
@@ -143,7 +146,7 @@ pullrebase:
 			echo "Current branch up-to-date. Continuing."; \
 			exit 0; \
 		fi; \
-		echo "Rebasing to origin/master"; \
+		echo "Rebasing to origin/main"; \
 		if git status --porcelain | grep -q '^.[^?]'; \
 		then \
 			git stash save; \
@@ -179,7 +182,7 @@ autospec: preautospec-checks pullrebase localreponotice clean-old-content
 		$${SETVERSION:+ --version $${SETVERSION}} \
 		$${NON_INTERACTIVE:+ --non_interactive} \
 		$${SKIP_GIT:+ --skip-git} \
-		$${CLEANUP:+ -C} \
+		$(AUTOSPEC_CLEANUP_OPT) \
 		$(firstword $(NEWURL) $(URL));
 	$(MAKE) link-new-rpms PKG_REPO_DIR="."
 	@$(MAKE) spdxcheck
@@ -214,14 +217,24 @@ autospecnostate:
 scanlicense:
 	python3 $(TOPLVL)/projects/autospec/autospec/autospec.py -t . --config $(AUTOSPEC_CONF) --license-only $(firstword $(NEWURL) $(URL)) --name $(PKG_NAME)
 
-#help bump: Increments the release file by one.
+#help bump: Increments the package release number by one and commits the result. If
+#help the variable BUMP_MSG is set, its value is used as the commit summary.
+#help Otherwise a generic commit summary is used.
 bump:
 	git pull --rebase
 	$(MAKE) bumpnogit
 	git add $(SPECFILE) release
-	git commit -a -m "version bump from $(shell $(call queryspec,%{VERSION}-%{RELEASE}\n,$(SPECFILE))) to `$(call queryspec,%{VERSION}-%{RELEASE}\n,$(SPECFILE))`"
+	fromver=$(shell $(call queryspec,%{VERSION}-%{RELEASE}\n,$(SPECFILE))); \
+	tover=`$(call queryspec,%{VERSION}-%{RELEASE}\n,$(SPECFILE))`; \
+	if [[ -n "$(BUMP_MSG)" ]]; then \
+		bumpmsg="$(BUMP_MSG)"; \
+	else \
+		bumpmsg="version bump from $$fromver to $$tover"; \
+	fi; \
+	git commit -a -m "$$bumpmsg"
 
-#help bumpnogit: Increments the release file by one and does not commit changes.
+#help bumpnogit: Increments the package release number by one and does not commit
+#help changes.
 bumpnogit:
 	@$(MAKE) spdxcheck
 	oldrel=$(shell $(call queryspec,%{RELEASE}\n,$(SPECFILE))); \
@@ -307,8 +320,8 @@ prekoji-checks:
 koji: prekoji-checks kojidef
 	@$(MAKE) spdxcheck
 	@$(MAKE) checkblacklist
-	@if [ "$(CURRENT_BRANCH)" != "master" ] && [ "$(CURRENT_BRANCH)" != "main" ]; then \
-		echo "Error: Must be on the \"master\" or \"main\" branch to submit to koji" >&2; \
+	@if [ "$(CURRENT_BRANCH)" != "main" ]; then \
+		echo "Error: Must be on the \"main\" branch to submit to koji" >&2; \
 		exit 1; \
 	fi; \
 	if ! git diff --quiet HEAD -- ${SPECFILE}; then \
@@ -316,7 +329,7 @@ koji: prekoji-checks kojidef
 		exit 1; \
 	fi; \
 	git fetch; \
-	if git rev-parse --verify --quiet origin/master >/dev/null; then \
+	if git rev-parse --verify --quiet origin/main >/dev/null; then \
 		git pull --rebase; \
 	fi; \
 	if git ls-remote --tags --exit-code origin $(SRPMVERS) >/dev/null; then \
@@ -324,8 +337,15 @@ koji: prekoji-checks kojidef
 		exit 1; \
 	fi
 	git tag $(SRPMVERS)
-	git push origin $(CURRENT_BRANCH):master refs/tags/$(SRPMVERS)
+	git push origin $(CURRENT_BRANCH):main refs/tags/$(SRPMVERS)
 	$(KOJI_CMD) build $$KOJI_NOWAIT $(KOJI_TAG) $(PKG_BASE_URL)/$(PKG_NAME)?#$(SRPMVERS)
+	@if [ -f bump.list ]; then \
+		$(MAKE) koji-waitrepo; \
+		msg="Bump for $(shell $(call queryspec,%{NAME} %{VERSION}\n,$(SPECFILE)))"; \
+		for bump_dep in $$(cat bump.list); do \
+			(cd ../"$$bump_dep" && $(MAKE) bump BUMP_MSG="$$msg" && $(MAKE) koji-nowait) \
+		done \
+	fi
 
 #help rekoji: In case a previous 'make koji' failed, trigger a rebuild for the
 #help same tag.
@@ -349,6 +369,44 @@ koji-nowait:
 rekoji-nowait:
 	$(MAKE) KOJI_NOWAIT="--nowait --background" rekoji
 
+#help koji-waitrepo: Wait for current package changes to become available in the
+#help koji repo. If PKG_NAME is overridden on the command line, wait on changes for
+#help that package instead. This capability allows the developer to "chain" builds
+#help for submission to koji according to the state of the package repos on their
+#help system. Additional options for `koji wait-repo` can be specified via the
+#help WAIT_OPTS variable.
+koji-waitrepo: kojidef
+	@if [[ ! "${PKG_NAME}" =~ ^[A-Za-z0-9._+-]+$$ ]]; then \
+		echo "[ERROR] Invalid package name \"${PKG_NAME}\""; \
+		exit 1; \
+	fi; \
+	if [[ "${PKG_NAME}" != "$(notdir ${CURDIR})" ]]; then \
+		$(MAKE) -s -C ../${PKG_NAME} koji-waitrepo; \
+	else \
+		koji wait-repo --build=${SRPMVERS} ${WAIT_OPTS} ${KOJI_TAG}-build; \
+	fi
+
+update-versions:
+
+.PHONY: update
+#help update: Tries to run update.sh if it exists. update.sh is expected
+#help to check for version updates, exit (successfully) if none are found
+#help or update the package and push the update to koji.
+#help If no update.sh exists, update the version, autospec and push the
+#help update to koji (bumping the bump.list if found).
+update:
+	@if [ -f update.sh ]; then \
+		./update.sh; \
+	else \
+		$(MAKE) -s update-versions && \
+		$(MAKE) autospec CLEANUP=1 && \
+		if [ -f bump.list ]; then \
+			$(MAKE) -s koji; \
+		else \
+			$(MAKE) -s koji-nowait; \
+		fi \
+	fi \
+
 logcheck:
 	@perl $(TOPLVL)/projects/common/logcheck.pl results/build.log
 

Makefile.toplevel

@@ -52,7 +52,7 @@ $(clone_PKGS): $(PACKAGES_FILE) packages/common/Makefile.common
 	remotepkg=$(call remotepkgname,$$pkg); \
 	[ -d packages/$$pkg ] || ( \
 	echo "Checking out: packages/$$pkg"; \
-	git clone $(PKG_BASE_URL)/$$remotepkg packages/$$pkg; \
+	git clone -b main $(PKG_BASE_URL)/$$remotepkg packages/$$pkg; \
 	cd packages/$$pkg; \
 	$(call gitoliteurl,packages/$$pkg); \
 	$(call subjectprefix,$$pkg); \
@@ -68,13 +68,18 @@ ${PULL_PKGS}:
 	if [ ! -d "$$p/.git" ]; then echo "Nothing to pull for $$p - $$p/.git missing"; exit 0; fi; \
 	cd "$$p" ; \
 	if git remote | grep origin >/dev/null 2>&1; then \
-		O=$$(git rev-parse origin/master 2>/dev/null); \
+		case "$$p" in \
+			("projects/"*) BRANCH=master ;; \
+			("packages/"*) BRANCH=main ;; \
+			(*) BRANCH=master ;; \
+		esac; \
+		O=$$(git rev-parse origin/"$$BRANCH" 2>/dev/null); \
 		git fetch --tags origin >/dev/null 2>&1; \
-		N=$$(git rev-parse origin/master); \
+		N=$$(git rev-parse origin/"$$BRANCH"); \
 		if [ "$$O" != "$$N" ]; then \
 			echo "Updating: $$p"; \
-			if ! git merge --ff-only origin/master 2>/dev/null; then \
-				echo "$$p: Cannot fast-forward $$(git rev-parse --abbrev-ref HEAD) to origin/master" ; \
+			if ! git merge --ff-only origin/"$$BRANCH" 2>/dev/null; then \
+				echo "$$p: Cannot fast-forward $$(git rev-parse --abbrev-ref HEAD) to origin/$$BRANCH" ; \
 			fi ; \
 			git --no-pager log --graph --pretty=format:'%Cred%h%Creset -%C(yellow)%d%Creset %s %Cgreen(%cr) %C(bold blue)<%an>%Creset' --abbrev-commit $$O..$$N; echo; \
 		fi ; \
@@ -159,19 +164,19 @@ status: $(PACKAGES_FILE) $(addprefix packages/,$(PKGS_LOCAL))
 	if [ -d "$$p/.git" ] &&  [ -n "$$(git -C $$p status -uno --porcelain)" ]; then echo "Uncommitted changes in $$p:"; git -C "$$p" status --short; fi ;\
 	done
 
-#help diff: Runs git diff for all package repos and displays the output using
-#help diffstat. Requires that diffstat is installed.
+#help diff: Runs git diff for all package repos and displays the diffstat using
+#help the --stat flag.
 diff: $(PACKAGES_FILE) $(addprefix packages/,$(PKGS_LOCAL))
 	@for p in projects/common $(addprefix packages/,$(PKGS_LOCAL)); do \
-		(cd $$p; git status --porcelain | grep -vq '^?? ' && (echo "Uncommitted changes in: $$p"; git diff | diffstat -p1); :) ;\
+		(cd $$p; git status --porcelain | grep -vq '^?? ' && (echo "Uncommitted changes in: $$p"; git --no-pager diff --stat); :) ;\
 	done
 
-#help log: Run git log origin/master..HEAD for all package repos, thus
+#help log: Run git log origin/main..HEAD for all package repos, thus
 #help displaying any committed but unpushed changes.
 log: $(PACKAGES_FILE) $(addprefix packages/,$(PKGS_LOCAL))
 	@for p in projects/common $(addprefix packages/,$(PKGS_LOCAL)); do \
-		( cd $$p; if [ "$$(git rev-parse --verify HEAD)" != "$$(git rev-parse --verify origin/master)" ] ; then \
-		echo $$p ; git --no-pager log --pretty="format:%s" origin/master..HEAD ; echo ; echo;\
+		( cd $$p; if [ -n "$$(git rev-list origin/main..HEAD)" ] ; then \
+		echo $$p ; git --no-pager log --pretty="format:%s" origin/main..HEAD ; echo ; echo;\
 		fi ; ) \
 	done
 
@@ -211,7 +216,7 @@ autospecnew: preautospecnew-checks localreponotice
 		mkdir -p $(TOPLVL)/packages/$(NAME); \
 		( \
 			cd $(TOPLVL)/packages/$(NAME); \
-			git init; \
+			git init -b main; \
 			git remote add origin $(PKG_BASE_URL)/$(NAME); \
 			$(call gitoliteurl,packages/$(NAME)); \
 			$(call subjectprefix,$(NAME)); \
@@ -262,7 +267,7 @@ autospecnewgo: preautospecnew-checks localreponotice
 		mkdir -p $(TOPLVL)/packages/$(NAME); \
 		( \
 			cd $(TOPLVL)/packages/$(NAME); \
-			git init; \
+			git init -b main; \
 			git remote add origin $(PKG_BASE_URL)/$(NAME); \
 			$(call gitoliteurl,packages/$(NAME)); \
 			$(call subjectprefix,$(NAME)); \

README.md

@@ -23,7 +23,7 @@ Download the [user setup](user-setup.sh) script and run it on your Clear Linux
 system as an unprivileged user.
 
 ```
-$ curl -O https://raw.githubusercontent.com/clearlinux/common/master/user-setup.sh
+$ curl -O https://raw.githubusercontent.com/clearlinux/common/main/user-setup.sh
 $ chmod +x user-setup.sh
 $ ./user-setup.sh
 ```

licenses-spdx

@@ -32,6 +32,7 @@ Apache-1.0
 Apache-1.1
 Apache-2.0
 App-s2p
+Arphic-1999
 Artistic-1.0
 Artistic-1.0-Perl
 Artistic-1.0-cl8
@@ -59,11 +60,13 @@ BSD-Protection
 BSD-Source-Code
 BSL-1.0
 BUSL-1.1
+Baekmuk
 Bahyph
 Barr
 Beerware
 BitTorrent-1.0
 BitTorrent-1.1
+Bitstream-Vera
 BlueOak-1.0.0
 Borceux
 C-UDA-1.0
@@ -77,6 +80,7 @@ CC-BY-2.5-AU
 CC-BY-3.0
 CC-BY-3.0-AT
 CC-BY-3.0-DE
+CC-BY-3.0-IGO
 CC-BY-3.0-NL
 CC-BY-3.0-US
 CC-BY-4.0
@@ -176,6 +180,7 @@ FDK-AAC
 FSFAP
 FSFUL
 FSFULLR
+FSFULLRWD
 FTL
 Fair
 Frameworx-1.0
@@ -248,6 +253,7 @@ JPNIC
 JSON
 Jam
 JasPer-2.0
+Knuth-CTAN
 LAL-1.2
 LAL-1.3
 LGPL-2.0
@@ -270,6 +276,8 @@ LPPL-1.1
 LPPL-1.2
 LPPL-1.3a
 LPPL-1.3c
+LZMA-SDK-9.11-to-9.20
+LZMA-SDK-9.22
 Latex2e
 Leptonica
 LiLiQ-P-1.1
@@ -291,10 +299,12 @@ MPL-1.0
 MPL-1.1
 MPL-2.0
 MPL-2.0-no-copyleft-exception
+MS-LPL
 MS-PL
 MS-RL
 MTLL
 MakeIndex
+Minpack
 MirOS
 Motosoto
 MulanPSL-1.0
@@ -307,6 +317,7 @@ NBPL-1.0
 NCGL-UK-2.0
 NCSA
 NGPL
+NICTA-1.0
 NIST-PD
 NIST-PD-fallback
 NLOD-1.0
@@ -381,6 +392,7 @@ PolyForm-Noncommercial-1.0.0
 PolyForm-Small-Business-1.0.0
 PostgreSQL
 Python-2.0
+Python-2.0.1
 QPL-1.0
 Qhull
 RHeCos-1.1
@@ -461,6 +473,7 @@ Zlib
 blessing
 bzip2-1.0.5
 bzip2-1.0.6
+checkmk
 copyleft-next-0.3.0
 copyleft-next-0.3.1
 curl
@@ -475,7 +488,10 @@ iMatix
 libpng-2.0
 libselinux-1.0
 libtiff
+libutil-David-Nugent
+mpi-permissive
 mpich2
+mplus
 psfrag
 psutils
 wxWindows