Update packages file for version 21180

Signed-off-by: clrbuilder <david.j.klimesh@intel.com>

Makefile

@@ -15,7 +15,7 @@ endif
 
 update:
 	curl -f -o packages ${BASE_URL}/source/package-sources
-	cut -f1 packages | LC_ALL=en_US.utf8 sort > packages.new && mv packages.new packages
+	cut -f1 packages | LC_ALL=C sort > packages.new && mv packages.new packages
 
 spdx:
 	curl -s spdx.org/licenses/ | sed '0,/<tbody>/d;/<\/tbody>/q;s/<tr>/\f/g;s/$$/,/g;s/<[^>]*>//g' | awk 'BEGIN{RS="\f";FS=","} {print $$4}' | sed '/^$$/d;s/^[ ]*//' > spdx

Makefile.common

@@ -19,7 +19,12 @@ RPMS ?= $(LATEST_RPMS)
 
 WITH_SUDO = $(shell cmp /usr/bin/mock /usr/sbin/mock &> /dev/null && echo sudo )
 
-MOCK     ?= $(WITH_SUDO) /usr/bin/mock -r clear
+ifeq ($(wildcard $(TOPLVL)/repo/clear.cfg),)
+MOCK ?= $(WITH_SUDO) /usr/bin/mock -r $(MOCK_CONF)
+else
+MOCK ?= $(WITH_SUDO) /usr/bin/mock -r $(TOPLVL)/repo/clear.cfg
+USE_LOCAL_REPO = 1
+endif
 
 ifneq ($(wildcard upstream),)
 __allsources := $(notdir $(strip $(shell cat upstream)))
@@ -115,6 +120,13 @@ shell:
 .PHONY: $(SRPMFILE)
 $(SRPMFILE): $(SPECFILE) $(__allsources)
 	@$(MAKE) spdxcheck
+	@if [ -n "${USE_LOCAL_REPO}" ]; then \
+		printf '\n\n** NOTICE: Using local repo for the build. Continuing after 3 seconds.\n'; \
+		printf '** If this is not desired, run `make repodisable`.\n'; \
+		printf '** The repo can be re-enabled later with `make repoenable`.\n'; \
+		printf '** Run `touch $(TOPLVL)/repo/opt-in-build` to prevent the 3 second delay.\n\n\n'; \
+		[ -f $(TOPLVL)/repo/opt-in-build ] || sleep 3; \
+	fi >&2
 	$(MOCK) --buildsrpm --source=./ --spec=$(SPECFILE) --result=results/ --no-cleanup-after --uniqueext=$(PKG_NAME)
 
 # Do a git fetch and a git rebase rather than a git pull so aborting
@@ -148,7 +160,7 @@ autospec: pullrebase
 		echo "Specfile already exists and was not created by autospec.py! Aborting."; \
 		exit 1; \
 	fi
-	@printf 'PKG_NAME := %s\nURL = %s\n\n\ninclude ../common/Makefile.common\n' $(PKG_NAME) '$(firstword $(value NEWURL) $(value URL))' > Makefile
+	@printf 'PKG_NAME := %s\nURL = %s\nARCHIVES = %s\n\ninclude ../common/Makefile.common\n' $(PKG_NAME) '$(firstword $(value NEWURL) $(value URL))' '$(value ARCHIVES)' > Makefile
 	python3 $(TOPLVL)/projects/autospec/autospec/autospec.py -t . --integrity \
 		${NON_INTERACTIVE} --config "$(AUTOSPEC_CONF)" ${SKIP_GIT} \
 		$(firstword $(NEWURL) $(URL)) --name $(PKG_NAME) ${CLEANUP} \
@@ -238,10 +250,13 @@ prekoji-checks:
 koji: prekoji-checks kojidef
 	@$(MAKE) spdxcheck
 	@$(MAKE) checkblacklist
+	@if ! git branch | grep -q -E '^\* master'; then \
+		echo "Error: Must be on the master branch to submit to koji" >&2; \
+		exit 1; \
+	fi
 	git pull --rebase
 	git tag $(SRPMVERS)
-	git push --follow-tags
-	git push --tags
+	git push origin master refs/tags/$(SRPMVERS)
 	$(KOJI_CMD) build $$KOJI_NOWAIT $(KOJI_TAG) $(PKG_BASE_URL)/$(PKG_NAME)?#$(SRPMVERS)
 
 #help rekoji: In case a previous 'make koji' failed, trigger a rebuild for the
@@ -272,8 +287,11 @@ logcheck:
 $(TOPLVL)/repo:
 	@echo "Creating local RPM repository $(TOPLVL)/repo"
 	mkdir $(TOPLVL)/repo
+	$(MAKE) localrepocreate
 
-#help repoadd: Creates a local Yum repository in the $(TOPLVL)/repo directory.
+#help repoadd: Adds locally-built RPMs for this package to the local RPM
+#help repository. If this repository does not yet exist, it is created and
+#help enabled.
 repoadd: results/build.log $(TOPLVL)/repo
 	@if [ -z "`grep '^Wrote: .*$(shell basename $(SRPMFILE))$$' results/build.log`" ]; then \
 		echo "You have not yet succesfully built this release yet"; exit 1; \
@@ -282,17 +300,16 @@ repoadd: results/build.log $(TOPLVL)/repo
 		echo "Cleaning old rpms:"; \
 		for r in `cat .repo-index`; do \
 			echo "-$$r"; \
-			rm $(TOPLVL)/repo/$$r; \
+			rm -f $(TOPLVL)/repo/$$r; \
 		done; \
 		rm .repo-index; \
 	fi
 	for r in $(LATEST_RPMS); do echo "+$$r"; echo $$(basename $$r) >> .repo-index; cp $$r $(TOPLVL)/repo; done
-	( cd $(TOPLVL)/repo ; if type createrepo_c 1>/dev/null 2>&1; then createrepo_c .; else createrepo .; fi );
-	@cp $(TOPLVL)/projects/common/image-creator/yum.conf $(TOPLVL)/repo/.yum.conf
-	@printf "\n\n[local]\nname=Local\nfailovermethod=priority\nenabled=1\ngpgcheck=0\n" >> $(TOPLVL)/repo/.yum.conf
-	@printf "baseurl=file://$$(realpath $(TOPLVL))/repo/\n\n" >> $(TOPLVL)/repo/.yum.conf
+	$(MAKE) localrepocreate
+	$(call localrepoenable,${PM_CONF},${MOCK_CONF})
 
-#help repodel: Removes package from local Yum repository.
+#help repodel: Removes RPMs from the local RPM repository that were
+#help previously added by 'make repoadd' for this package.
 repodel:
 	@if [ -f .repo-index ]; then \
 		echo "Cleaning old rpms:"; \
@@ -301,8 +318,19 @@ repodel:
 			rm -f $(TOPLVL)/repo/$$r; \
 		done; \
 		rm .repo-index; \
+		$(MAKE) localrepocreate; \
 	fi
 
+#help repoenable: Enables the local RPM repository for use with Yum/DNF and
+#help Mock. If this repository does not yet exist, it is created.
+repoenable: $(TOPLVL)/repo ; $(call localrepoenable,${PM_CONF},${MOCK_CONF})
+
+#help repodisable: Disables the local RPM repository.
+repodisable: localrepodisable ;
+
+#help repostatus: Summarizes the local RPM repository status.
+repostatus: localrepostatus ;
+
 loop-up:
 	$(loopup)
 

Makefile.config

@@ -54,6 +54,13 @@ AUTOSPEC_CONF = $(TOPLVL)/projects/common/autospec.conf
 # in "pkg-mapping" for cloning/pulling package repos.
 USE_PACKAGE_MAPPING = yes
 
+# Package manager config file. Default to the in-tree copy.
+PM_CONF = $(TOPLVL)/projects/common/image-creator/yum.conf
+
+# Mock configuration file. Default to the in-tree copy.
+MOCK_CONF = $(TOPLVL)/projects/common/koji-client-files/clear.cfg
+
+
 # Include any site local configuration variables. These variables may override
 # the definitions given above.
 -include $(TOPLVL)/projects/common/Makefile.config.site_local

Makefile.functions

@@ -62,6 +62,64 @@ define remotepkgname
 $(if $(USE_PACKAGE_MAPPING),$$(awk -v P="$(1)" '$$1 == P { res=$$2 } END { print res ? res : P }' $(TOPLVL)/projects/common/pkg-mapping),$(1))
 endef
 
+# Enables the local RPM repo by installing package manager and Mock configs.
+# First argument is the path to the package manager config, and the second
+# argument is the path to the mock config. Each of these config files is
+# augmented for local repo support.
+define localrepoenable
+	@cp $(1) $(TOPLVL)/repo/yum.conf
+	@printf "\n\n[local]\nname=Local\nfailovermethod=priority\nenabled=1\ngpgcheck=0\n" >> $(TOPLVL)/repo/yum.conf
+	@printf "baseurl=file://$$(realpath $(TOPLVL))/repo/\n\n" >> $(TOPLVL)/repo/yum.conf
+	@cp $(2) $(TOPLVL)/repo/clear.cfg
+	@printf "\n\n[localrepo]\nname=Local repo\nfailovermethod=priority\nenabled=1\ngpgcheck=0\n" >> $(TOPLVL)/repo/clear.cfg
+	@printf "baseurl=file://$$(realpath $(TOPLVL))/repo/\n\n" >> $(TOPLVL)/repo/clear.cfg
+	@sed -i '/^"""/d; $$a"""' $(TOPLVL)/repo/clear.cfg
+endef
+
+# Disables the local RPM repo by removing the installed package manager and
+# Mock configuration files.
+localrepodisable:
+	@rm -f $(TOPLVL)/repo/yum.conf
+	@rm -f $(TOPLVL)/repo/clear.cfg
+
+# Runs createrepo_c (or createrepo) for the local RPM repo
+localrepocreate:
+	( cd $(TOPLVL)/repo ; if type createrepo_c 1>/dev/null 2>&1; then createrepo_c .; else createrepo .; fi );
+
+# Remove all RPMs from the local RPM repo
+localrepoclean:
+	@find $(TOPLVL)/repo -maxdepth 1 -name '*.rpm' -delete
+
+# Summarizes the local RPM repo status
+localrepostatus:
+	@if [ ! -d $(TOPLVL)/repo ]; then \
+		echo '** Local repo not found'; \
+		exit 0; \
+	fi; \
+	if [ -f $(TOPLVL)/repo/yum.conf ]; then \
+		echo '** Local repo enabled for Yum/DNF.'; \
+	else \
+		echo '** Local repo not enabled for Yum/DNF.'; \
+	fi; \
+	if [ -f $(TOPLVL)/repo/clear.cfg ]; then \
+		echo '** Local repo enabled for Mock.'; \
+	else \
+		echo '** Local repo not enabled for Mock.'; \
+	fi; \
+	echo -n '** Local repo package list: '; \
+	( \
+		cd "$(TOPLVL)/repo"; \
+		LC_COLLATE="C"; \
+		shopt -s nullglob; \
+		set -- *.rpm; \
+		if [ -n "$$1" ]; then \
+			printf '\n'; printf '%q\n' "$$@"; \
+		else \
+			printf 'none found\n'; \
+		fi; \
+	)
+
+
 .PHONY: help
 ##### Code
 # Make sure that HELPSPACE has exactly HELPLEN spaces in it

Makefile.toplevel

@@ -148,6 +148,7 @@ proper: $(proper_PKGS)
 .PHONY: $(proper_PKGS)
 
 $(clean_PKGS):
+	@echo "cleaning $(patsubst clean_%,%,$@)"
 	-@$(MAKE) -s -j -C $(addprefix packages/,$(patsubst clean_%,%,$@)) clean
 
 $(proper_PKGS):
@@ -157,7 +158,7 @@ $(proper_PKGS):
 #help and unstaged files in addition to staged files.
 status: $(PACKAGES_FILE) $(addprefix packages/,$(PKGS))
 	@for p in projects/common $(addprefix packages/,$(PKGS)); do \
-		(cd $$p ; git status | grep -q 'nothing to commit, working [^ ]* clean' || (echo "Uncommitted changes in $$p:"; git status)) ;\
+	if [ -d "$$p/.git" ] &&  [ -n "$$(git -C $$p status -uno --porcelain)" ]; then echo "Uncommitted changes in $$p:"; git -C "$$p" status --short; fi ;\
 	done
 
 #help diff: Runs git diff for all package repos and displays the output using
@@ -189,14 +190,20 @@ provides:
 #help process. For more information about autospec, see the project page on Github https://github.com/clearlinux/autospec
 autospecnew:
 	@if [ -z $(NAME) ] || [ -z $(URL) ]; then \
-		echo "Please specify NAME and URL"; \
+		echo "Please specify NAME and URL. The ARCHIVES variable is optional."; \
 		exit 1; \
 	fi
-	@git clone $(PKG_BASE_URL)/$(NAME) $(TOPLVL)/packages/$(NAME) &> /dev/null || true
 	@if [ ! -d $(TOPLVL)/packages/$(NAME)/.git ]; then \
 		echo "no remote repository found, creating new package repository and running autospec"; \
 		mkdir -p $(TOPLVL)/packages/$(NAME); \
-		printf 'PKG_NAME := %s\nURL = %s\n\n\ninclude ../common/Makefile.common\n' $(NAME) '$(value URL)' > $(TOPLVL)/packages/$(NAME)/Makefile; \
+		( \
+			cd $(TOPLVL)/packages/$(NAME); \
+			git init; \
+			git remote add origin $(PKG_BASE_URL)/$(NAME); \
+			$(call gitoliteurl,packages/$(NAME)); \
+			$(call subjectprefix,$(NAME)); \
+		); \
+		printf 'PKG_NAME := %s\nURL = %s\nARCHIVES = %s\n\ninclude ../common/Makefile.common\n' $(NAME) '$(value URL)' '$(value ARCHIVES)' > $(TOPLVL)/packages/$(NAME)/Makefile; \
 		python3 $(TOPLVL)/projects/autospec/autospec/autospec.py --integrity -t packages/$(NAME) --config $(AUTOSPEC_CONF) $(URL) --name $(NAME); \
 		$(TOPLVL)/projects/common/checkblacklist.sh $(TOPLVL)/projects/common/blacklist $(TOPLVL)/packages/${NAME}/results/*.rpm; \
 	else \
@@ -204,5 +211,24 @@ autospecnew:
 		exit 1; \
 	fi
 
+$(TOPLVL)/repo:
+	@echo "Creating local RPM repository $(TOPLVL)/repo"
+	mkdir $(TOPLVL)/repo
+	$(MAKE) localrepocreate
+
+#help repoenable: Enables the local RPM repository for use with Yum/DNF and
+#help Mock. If this repository does not yet exist, it is created.
+repoenable: $(TOPLVL)/repo ; $(call localrepoenable,${PM_CONF},${MOCK_CONF})
+
+#help repodisable: Disables the local RPM repository.
+repodisable: localrepodisable ;
+
+#help repoclean: Removes all RPMs from the local RPM repository.
+repoclean: localrepoclean localrepocreate ;
+
+#help repostatus: Summarizes the local RPM repository status.
+repostatus: localrepostatus ;
+
+
 # Define site local toplevel targets in a separate makefile
 -include $(TOPLVL)/projects/common/Makefile.toplevel.site_local

README.md

@@ -20,8 +20,16 @@ building Clear Linux packages.
 ### Automated setup
 
 Download the [user setup](user-setup.sh) script and run it on your Clear Linux
-system as an unprivileged user. After the script completes, make sure to logout
-and login again to complete the setup process.
+system as an unprivileged user.
+
+```
+$ curl -O https://raw.githubusercontent.com/clearlinux/common/master/user-setup.sh
+$ chmod +x user-setup.sh
+$ ./user-setup.sh
+```
+
+After the script completes, make sure to logout and login again to complete the
+setup process.
 
 The script either accepts no options, or all (3) options in case you are
 configuring the Koji CLI for remote building on a Koji server. The options are

autospec.conf

@@ -13,3 +13,11 @@
 
 # String to replace with "localhost" in upstream tarball URLs
 #urlban =
+
+# Path to packages file, a list of current packages in Clear Linux. It can be
+# an absolute path or a path relative to this autospec.conf.
+#packages_file =
+
+# Path to yum config, used for generating whatrequires. It can be an absolute
+# path or a path relative to this autospec.conf.
+#yum_conf =

koji-client-files/clear.cfg

@@ -4,8 +4,10 @@ config_opts['legal_host_arches'] = ('x86_64',)
 config_opts['chroot_setup_cmd'] = 'groupinstall build srpm-build'
 config_opts['dist'] = 'clear'  # only useful for --resultdir variable subst
 config_opts['extra_chroot_dirs'] = [ '/run/lock', ]
-config_opts['useradd'] = '/usr/sbin/useradd -m -u %(uid)s -g %(gid)s -d %(home)s  %(user)s' 
+config_opts['useradd'] = '/usr/sbin/useradd -m -u %(uid)s -g %(gid)s -d %(home)s  %(user)s'
 config_opts['plugin_conf']['ccache_enable'] = False
+config_opts['releasever'] = 'clear'
+config_opts['package_manager'] = 'dnf'
 
 
 config_opts['yum.conf'] = """