This config includes the phycore_am62ax_r5_defconfig file as well as
the am62x_r5_usbdfu.config fragment. We need another defconfig
because the AM62Ax has not enough internal SRAM to support all boot
sources. The normal phycore_am62ax_r5_defconfig should allow to boot
from MMC and OSPI while this new defconfig allows to boot from USB.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Enable raw & on disk capsule updates and provide configs required
for updating MTD devices. Also resync after savedefconfig.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
On fast models, the CRC32 feature is disabled by default. When enabled
in U-Boot, it leads to synchronous aborts due to unrecognized
instructions. This change ensures CRC32 is disabled by default to
maintain compatibility.
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Currently this platform implicity builds CONFIG_TPL_DM_I2C support
without setting the symbol. Add it for clarity.
Signed-off-by: Tom Rini <trini@konsulko.com>
Introduce the config fragment for enabling USB MSC boot. USB MSC boot
involves fetching the next stage of the bootloader from a USB Mass Storage
device such as a USB Flash Drive with the USB controller on the SoC acting
as the USB Host.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Introduce the config fragment for enabling USB MSC boot. USB MSC boot
involves fetching the next stage of the bootloader from a USB Mass Storage
device such as a USB Flash Drive with the USB controller on the SoC acting
as the USB Host.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
The configuration options CONFIG_VIDCONSOLE_AS_LCD and CONFIG_VIDCONSOLE_AS_
NAME have been marked as obsolete and scheduled for deletion in late 2020.
That's already long overdue and the last remaining consumers of these options
have already migrated to using "vidconsole" in their "stdout" and "stderr"
environment variables, so let's delete these two configuration options.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Acked-by: Soeren Moch <smoch@web.de> # tbs2910
When "fdtfile" is not set, use the "variant" environment variable to
select the correct DTB.
Apalis/Colibri iMX6 V1.2 replaced the STMPE811 ADC/Touch controller
which is EOL with the TLA2024 ADC and AD7879 touch controller. They thus
require a different DTB, which we can easily select with the variant env
variable.
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
At present there is a hex value SPL_STACK which both determines whether
SPL has its own initial stack and the hex value of that stack.
Split off the former into SPL_HAVE_INIT_STACK with SPL_STACK depending
on that and only providing the latter.
Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Resync defconfig files]
The most common word for features that make a platform work is to use
'HAVE_xxx'. Rename this option to match.
Update the help to use the word 'phase' rather than 'stage', since
that is the current terminology. Also clarify that, absent this setting,
the stack pointer generally comes from the value used by U-Boot proper,
rather than SPL.
Move the option just above TPL_STACK which depends on it.
Signed-off-by: Simon Glass <sjg@chromium.org>
CI: https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/25112
- Add drivers for MFD STM32 TIMERS and STM32 PWM and enable them on stm32mp135f-dk
- Restrict _debug_uart_init() usage in STM32 serial driver
- Add support for environment in eMMC on STM32MP13xx DHCOR SoM
- Introduce DH STM32MP15xx DHSOM board specific defconfigs
- Fix CONFIG_BOOTCOUNT_ALTBOOTCMD update on DH STM32MP1 DHSOM
- Update maintainer for board stm32f746-disco
- Fix Linux cmdline for stm32f769-disco
- Cleanup in stm32f***-u-boot.dtsi and in board_late_init() by removing
legacy led and button management.
Enable the following configs:
* CONFIG_MFD_STM32_TIMERS: enables support for the STM32 multifunction
timer
* CONFIG_DM_PWM: enables support for pulse-width modulation devices
* CONFIG_CMD_PWM: enables 'pwm' command to control PWM channels
* CONFIG_PWM_STM32: enables support for the STM32 PWM devices
Signed-off-by: Cheick Traore <cheick.traore@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
The Renesas R-Car Gen3 Salvator-X(S) boards contain USB micro-B port
on which the USBHS controller is accessible. Enable the USBHS UDC
driver to make this port usable, enable UMS USB Mass Storage support
to make it possible to expose block devices as USB Mass Storage to
Host PC.
The USB VID/PID is picked from R-Car Series, 3rd Generation reference
manual Rev.2.00 chapter 19.2.8 USB download mode, and matches R-Car H3
BootROM USB download mode VID/PID.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The Mi Pad is a tablet computer based on Nvidia Tegra K1 SoC which
originally ran the Android operating system. The Mi Pad has a 7.9" IPS
display with 1536 x 2048 (324 ppi) resolution. 2 GB of RAM and 16/64 GB of
internal memory that can be supplemented with a microSDXC card giving up to
128 GB of additional storage.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Enable support for environment in eMMC on STM32MP13xx DHCOR SoM,
in addition to existing support for environment in SPI NOR. The
environment size is the same, except in case the environment is
placed in eMMC, it is stored at the end of eMMC BOOT partitions
in the last 32 sectors of each eMMC HW BOOT partition.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
The Linux cmdline encoded in the defconfig is wrong, the
STM32 USART driver registers as ttySTM0 not ttyS0.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Move stm32mp15_dhcom_basic_defconfig into stm32mp15_dhcom_basic.config.
Retain legacy stm32mp15_dhcom_basic_defconfig as multi-config for all
DH STM32MP15xx DHCOM based boards. Move stm32mp15_dhsor_basic_defconfig
into stm32mp15_dhsor_basic.config. Retain stm32mp15_dhsor_basic_defconfig
as multi-config for all DH STM32MP15xx DHCOR based boards.
Introduce separate stm32mp15_dhcom_drc02_basic_defconfig,
stm32mp15_dhcom_pdk2_basic_defconfig, stm32mp15_dhcom_picoitx_basic_defconfig
for each STM32MP15xx DHCOM based board and separate
stm32mp15_dhcor_avenger96_basic_defconfig,
stm32mp15_dhcor_drc_compact_basic_defconfig,
stm32mp15_dhcor_testbench_basic_defconfig for each
STM32MP15xx DHCOR based board, to make build for those boards easier.
No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
The environment is missing closing quotes for string variable, but the
variable is empty on this system, remove the CONFIG_BOOTCOUNT_ALTBOOTCMD
assignment entirely.
Fixes: 940135eea5 ("Kconfig: Move CONFIG_BOOTCOUNT_ALTBOOTCMD to Kconfig")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
The removal of the "st,button1" and "st,led1" compatibles has emptied
the board_late_init(), so let's remove it along with the configuration
that allows its invocation.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
AMD/Xilinx changes for v2025.04-rc4
Zynq:
- Guard code around SPL_FS_LOAD_PAYLOAD_NAME
Versal*:
- Remove tftp block size 4096
Versal:
- Use clocks per DT binding
- Store driver data in data section
Versal Gen 2:
- Fix major/minor version decoding
Snow requires a fixed bloblist to operate, so re-enable this option.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 864106f3c4 ("bloblist: Make BLOBLIST_ALLOC the default")
Enable support for USB DFU boot via USB0 instance of USB on J784S4 SoC
which is a Cadence USB Controller. Additionally, enable support for USB
DFU flash and USB Mass Storage (UMS) command. While at it, sync with
savedefconfig.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
The USB0 instance of USB on J784S4 SoC is a Cadence USB Controller and
supports USB DFU boot. Enable support for it.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Enable ESM configs. ESMs are a prerequisite to enable
watchdog reset functionality. The ESM aka error signalling module
is primarily responsible for sensing the watchdog reset event.
Signed-off-by: Keerthy <j-keerthy@ti.com>
