Introduce the config fragment for enabling USB MSC boot. USB MSC boot
involves fetching the next stage of the bootloader from a USB Mass Storage
device such as a USB Flash Drive with the USB controller on the SoC acting
as the USB Host.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Introduce the config fragment for enabling USB MSC boot. USB MSC boot
involves fetching the next stage of the bootloader from a USB Mass Storage
device such as a USB Flash Drive with the USB controller on the SoC acting
as the USB Host.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
The configuration options CONFIG_VIDCONSOLE_AS_LCD and CONFIG_VIDCONSOLE_AS_
NAME have been marked as obsolete and scheduled for deletion in late 2020.
That's already long overdue and the last remaining consumers of these options
have already migrated to using "vidconsole" in their "stdout" and "stderr"
environment variables, so let's delete these two configuration options.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Acked-by: Soeren Moch <smoch@web.de> # tbs2910
When "fdtfile" is not set, use the "variant" environment variable to
select the correct DTB.
Apalis/Colibri iMX6 V1.2 replaced the STMPE811 ADC/Touch controller
which is EOL with the TLA2024 ADC and AD7879 touch controller. They thus
require a different DTB, which we can easily select with the variant env
variable.
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
At present there is a hex value SPL_STACK which both determines whether
SPL has its own initial stack and the hex value of that stack.
Split off the former into SPL_HAVE_INIT_STACK with SPL_STACK depending
on that and only providing the latter.
Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Resync defconfig files]
The most common word for features that make a platform work is to use
'HAVE_xxx'. Rename this option to match.
Update the help to use the word 'phase' rather than 'stage', since
that is the current terminology. Also clarify that, absent this setting,
the stack pointer generally comes from the value used by U-Boot proper,
rather than SPL.
Move the option just above TPL_STACK which depends on it.
Signed-off-by: Simon Glass <sjg@chromium.org>
CI: https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/25112
- Add drivers for MFD STM32 TIMERS and STM32 PWM and enable them on stm32mp135f-dk
- Restrict _debug_uart_init() usage in STM32 serial driver
- Add support for environment in eMMC on STM32MP13xx DHCOR SoM
- Introduce DH STM32MP15xx DHSOM board specific defconfigs
- Fix CONFIG_BOOTCOUNT_ALTBOOTCMD update on DH STM32MP1 DHSOM
- Update maintainer for board stm32f746-disco
- Fix Linux cmdline for stm32f769-disco
- Cleanup in stm32f***-u-boot.dtsi and in board_late_init() by removing
legacy led and button management.
Enable the following configs:
* CONFIG_MFD_STM32_TIMERS: enables support for the STM32 multifunction
timer
* CONFIG_DM_PWM: enables support for pulse-width modulation devices
* CONFIG_CMD_PWM: enables 'pwm' command to control PWM channels
* CONFIG_PWM_STM32: enables support for the STM32 PWM devices
Signed-off-by: Cheick Traore <cheick.traore@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
The Renesas R-Car Gen3 Salvator-X(S) boards contain USB micro-B port
on which the USBHS controller is accessible. Enable the USBHS UDC
driver to make this port usable, enable UMS USB Mass Storage support
to make it possible to expose block devices as USB Mass Storage to
Host PC.
The USB VID/PID is picked from R-Car Series, 3rd Generation reference
manual Rev.2.00 chapter 19.2.8 USB download mode, and matches R-Car H3
BootROM USB download mode VID/PID.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The Mi Pad is a tablet computer based on Nvidia Tegra K1 SoC which
originally ran the Android operating system. The Mi Pad has a 7.9" IPS
display with 1536 x 2048 (324 ppi) resolution. 2 GB of RAM and 16/64 GB of
internal memory that can be supplemented with a microSDXC card giving up to
128 GB of additional storage.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Enable support for environment in eMMC on STM32MP13xx DHCOR SoM,
in addition to existing support for environment in SPI NOR. The
environment size is the same, except in case the environment is
placed in eMMC, it is stored at the end of eMMC BOOT partitions
in the last 32 sectors of each eMMC HW BOOT partition.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
The Linux cmdline encoded in the defconfig is wrong, the
STM32 USART driver registers as ttySTM0 not ttyS0.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Move stm32mp15_dhcom_basic_defconfig into stm32mp15_dhcom_basic.config.
Retain legacy stm32mp15_dhcom_basic_defconfig as multi-config for all
DH STM32MP15xx DHCOM based boards. Move stm32mp15_dhsor_basic_defconfig
into stm32mp15_dhsor_basic.config. Retain stm32mp15_dhsor_basic_defconfig
as multi-config for all DH STM32MP15xx DHCOR based boards.
Introduce separate stm32mp15_dhcom_drc02_basic_defconfig,
stm32mp15_dhcom_pdk2_basic_defconfig, stm32mp15_dhcom_picoitx_basic_defconfig
for each STM32MP15xx DHCOM based board and separate
stm32mp15_dhcor_avenger96_basic_defconfig,
stm32mp15_dhcor_drc_compact_basic_defconfig,
stm32mp15_dhcor_testbench_basic_defconfig for each
STM32MP15xx DHCOR based board, to make build for those boards easier.
No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
The environment is missing closing quotes for string variable, but the
variable is empty on this system, remove the CONFIG_BOOTCOUNT_ALTBOOTCMD
assignment entirely.
Fixes: 940135eea5 ("Kconfig: Move CONFIG_BOOTCOUNT_ALTBOOTCMD to Kconfig")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
The removal of the "st,button1" and "st,led1" compatibles has emptied
the board_late_init(), so let's remove it along with the configuration
that allows its invocation.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
AMD/Xilinx changes for v2025.04-rc4
Zynq:
- Guard code around SPL_FS_LOAD_PAYLOAD_NAME
Versal*:
- Remove tftp block size 4096
Versal:
- Use clocks per DT binding
- Store driver data in data section
Versal Gen 2:
- Fix major/minor version decoding
Snow requires a fixed bloblist to operate, so re-enable this option.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 864106f3c4 ("bloblist: Make BLOBLIST_ALLOC the default")
Enable support for USB DFU boot via USB0 instance of USB on J784S4 SoC
which is a Cadence USB Controller. Additionally, enable support for USB
DFU flash and USB Mass Storage (UMS) command. While at it, sync with
savedefconfig.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
The USB0 instance of USB on J784S4 SoC is a Cadence USB Controller and
supports USB DFU boot. Enable support for it.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Enable ESM configs. ESMs are a prerequisite to enable
watchdog reset functionality. The ESM aka error signalling module
is primarily responsible for sensing the watchdog reset event.
Signed-off-by: Keerthy <j-keerthy@ti.com>
pre-load related config options are enabled to have support of it in host
tools.
'CONFIG_FIT_SIGNATURE=y' is being automatically removed since it is
selected by CONFIG_IMAGE_PRE_LOAD_SIG.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
This board does not have any NVMe slot, so disable unneeded
CONFIG_NVME_PCI option.
Fixes: bf4a33e725 ("board: rockchip: add FriendlyElec NanoPi R3S")
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
BootROM leave GPIO4_D6 configured as SDMMC_PWREN function and DW MMC
driver set PWREN high in dwmci_init().
However, HW revision prior to v1.2 must pull GPIO4_D6 low to access
sdmmc. For HW revision v1.2 the state of GPIO4_D6 has no impact.
Upstream Linux commit 26c100232b09 "arm64: dts: rockchip: Fix sdmmc
access on rk3308-rock-s0 v1.1 boards" fixed this issue by adding a
vcc_sd regulator.
Include the new vcc_sd regulator in SPL and enable required Kconfig
options to set GPIO4_D6 low to fix reading sdmmc on v1.1 hw revision.
Fixes: 25438c40a0 ("board: rockchip: Add Radxa ROCK S0")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The imx6q-lxr devicetree has landed in kernel 6.13.
Switch to OF_UPSTREAM to make use of the upstream devicetree.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Move content of dh_imx6_defconfig into dh_imx6.config. Retain legacy
dh_imx6_defconfig as multi-config for all DH i.MX6 DHSOM based boards.
Introduce separate imx6_dhcom_drc02_defconfig, imx6_dhcom_pdk2_defconfig
and imx6_dhcom_picoitx_defconfig for each i.MX6 DHSOM based board, to
make build for those boards easier. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Deduplicate the config files again, move CONFIG_BOOTCOUNT_ALTBOOTCMD
into common imx8mp_dhsom.config .
Fixes: 940135eea5 ("Kconfig: Move CONFIG_BOOTCOUNT_ALTBOOTCMD to Kconfig")
Signed-off-by: Marek Vasut <marex@denx.de>
Deduplicate the config files again, move CONFIG_BOOTCOUNT_ALTBOOTCMD
into common imx8m_data_modul.config .
Fixes: 940135eea5 ("Kconfig: Move CONFIG_BOOTCOUNT_ALTBOOTCMD to Kconfig")
Signed-off-by: Marek Vasut <marex@denx.de>
The environment is missing quotes for string variable, add them.
Fixes: 940135eea5 ("Kconfig: Move CONFIG_BOOTCOUNT_ALTBOOTCMD to Kconfig")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
The device tree for imxrt1050 is now
available in the /dts/upstream directory.
Migrate board to use OF_UPSTREAM.
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
The CONFIG_DEFAULT_FDT_FILE should be imx8mq_evk.dtb for this board
Fixes: 7050bd925f ("imx: imx8mq_evk: Switch to BOOTSTD")
Reported-by: Ludwig Nussel <ludwig.nussel@siemens.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
