Create a new defconfig file called `coreboot64-no-spl_defconfig`,
tailored specifically for 64-bit X86 architecture systems that operate
without the Secondary Program Loader (SPL). This configuration takes its
inspiration from `coreboot64_defconfig`..
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Simon Glass <sjg@chromium.org> says:
U-Boot can start and boot an OS in both qemu-x86 and qemu-x86_64 but it
is not perfect.
With both builds, executing the VESA ROM causes an intermittent hang, at
least on some AMD CPUs.
With qemu-x86_64 kvm cannot be used since the move to long mode (64-bit)
is done in a way that works on real hardware but not with QEMU. This
means that performance is 4-5x slower than it could be, at least on my
CPU.
We can work around the first problem by using Bochs, which is anyway a
better choice than VESA for QEMU. The second can be addressed by using
the same descriptor across the jump to long mode.
With an MTRR fix this allows booting into Ubuntu on qemu-x86_64
In v3 some e820 patches are included to make booting reliable and avoid
ACPI tables being dropped. Also, several MTTR problems are addressed, to
support memory sizes above 4GB reliably.
Link: https://lore.kernel.org/all/20250315142643.2600605-1-sjg@chromium.org/
The existing QEMU implementation mostly ignored BLOBLIST_TABLES and
allocates the bulk of the tables with malloc(). Update it to place all
tables in the bloblist. Since QEMU declares a size of 128KB regardless
of the size of its tables, this requires a larger bloblist.
Fix up the e820 table to handle this, keeping the old code as an option
for now, to assist with any future bug-fixing.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add support for an environment stored in the first partition of the
disk, which is assumed to hold a FAT filesystem.
Support the 'cat' command as it is useful for looking at extlinux.conf
files.
Signed-off-by: Simon Glass <sjg@chromium.org>
The vesa display is widely used on hardware, but it is a bit of a pain
with QEMU. It requires executing option ROMs, which either doesn't work
with kvm, or is difficult to do in a kvm/QEMU-friendly way.
THe bochs display is probably better anyway, so switch to that. It works
fine with kvm as it doesn't need an option ROM.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: https://source.denx.de/u-boot/custodians/u-boot-dm/-/issues/31
The SPL and pre-reloc malloc()-space is not large enough to start up
with a display. Expand it.
Switch the order of SPL_SYS_MALLOC_F_LEN and SPL_TEXT_BASE since this
matches what 'savedefconfig' gives us.
Signed-off-by: Simon Glass <sjg@chromium.org>
Manorit Chawdhry <m-chawdhry@ti.com> says:
The series adds support for J742S2 family of SoCs. Also adds J742S2 EVM
Support and re-uses most of the stuff from the superset device J784s4.
This device is a subset of J784S4 and shares the same memory map and
thus the code is being reused from J784S4 to avoid duplication.
It initially cleans up the J784s4 and AM69 files so that they can be
re-usable for j742s2 and then it introduces J742S2.
The DT for the following SoC will be coming to U-boot during 6.13 Sync
so the series is kept as RFC till then.
Here are some of the salient features of the J742S2 automotive grade
application processor:
The J742S2 SoC belongs to the K3 Multicore SoC architecture platform,
providing advanced system integration in automotive, ADAS and industrial
applications requiring AI at the network edge. This SoC extends the K3
Jacinto 7 family of SoCs with focus on raising performance and
integration while providing interfaces, memory architecture and compute
performance for multi-sensor, high concurrency applications.
Some changes that this devices has from J784S4 are:
* 4x Cortex-A72 vs 8x Cortex-A72
* 3x C7x DSP vs 4x C7x DSP
* 4 port ethernet switch vs 8 port ethernet switch
* 2 DDR controller vs 4 DDR controller
Test logs:
https://gist.github.com/manorit2001/f7df0e8cca1e9973b4361f0559c6f53d
Link: https://lore.kernel.org/r/20250317-b4-upstream-j742s2-v4-0-4ba88bfd357a@ti.com
Based off j784s4 configs with delta changes for J742S2
[ Add AVS support for J742S2 ]
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Marek Vasut <marex@denx.de> says:
Import exfat-fuse libexfat, add U-Boot filesystem layer porting glue
code and wire exfat support into generic filesystem support code. This
adds exfat support to U-Boot.
Fill in generic filesystem interface for mkdir and rm commands.
Make filesystem tests test the generic interface as well as exfat,
to make sure this code does not fall apart.
Link: https://github.com/relan/exfat/commits/0b41c6d3560d ("CI: bump FreeBSD to 13.1.")
Link: https://lore.kernel.org/r/20250317031418.223019-1-marex@denx.de
Enable exfat support in sandbox and sandbox64 to assure build and
test coverage of this filesystem on both 32bit and 64bit builds.
Signed-off-by: Marek Vasut <marex@denx.de>
Christian Marangi <ansuelsmth@gmail.com> says:
This little series adds initial support for Airoha AN7581 SoC.
With the help of some backport patch, this use OF_UPSTREAM
directly.
Posting this to have the targer and the very basic driver.
Ethernet, SNAND and eMMC support is already ready downstream
and will be posted shortly after this gets approved.
Having the first driver ready permits to separately push
dedicate series for SNAND, eMMC and Ethrnet as they all depends
on basic support of clock and reset and nothing else.
Link: https://lore.kernel.org/r/20250314185941.27834-1-ansuelsmth@gmail.com
Add initial support for Airoha AN7581 SoC. This adds the initial Kconfig
and Makefile entry for the SoC, an U-Boot specific DTSI and initial config
for it. Also add the initial code for CPU and RAM initialization.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Since commit 61040097a9 ("reset: at91: Add reset driver for basic
assert/deassert operations") the "atmel,sama5d3-rstc" compatible for
the sama5d2 reset controller in sama5d2.dtsi is not handled by
CONFIG_SYSRESET_AT91 anymore, but by CONFIG_RESET_AT91 now.
This resulted in the following error, when trying to reset from the U-Boot
shell on a sama5d27_wlsom1 board:
=> reset
resetting ...
System reset not supported on this platform
### ERROR ### Please RESET the board ###
Fix it by enabling the CONFIG_RESET_AT91 driver in all sama5d27 defconfigs.
Tested on a sama5d27_wlsom1 board.
Based on the fix in commit e1ee52ca56 ("configs: at91: sam9x60: Switch
to new reset driver")
Fixes: 61040097a9 ("reset: at91: Add reset driver for basic assert/deassert operations")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Increase the size of malloc region allocated before relocation, as
current size is insufficient for DFU boot causing it to overflow and
corrupt the stack.
Fixed regulator configs are required by vtt_supply which is used by
"am654_ddrss" driver. Without it during DFU boot DDRSS initialization
is failing. These configs are enabled in "am65x_evm_r5_defconfig" but
are missing from "am65x_evm_r5_usbdfu_defconfig". Fix that by updating
"am65x_evm_r5_usbdfu_defconfig" to include "am65x_evm_r5_defconfig".
Signed-off-by: Hrushikesh Salunke <h-salunke@ti.com>
Add CONFIG_ESM_K3 and CONFIG_ESM_PMIC to enable ESM initialization
in J7200.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
CFG_SYS_SPI_* are used in falcon boot to specify the offsets and size of
the respective payloads. This patch moves them to Kconfig keeping the
values consistent for each of the affected boards.
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Enable support for USB mass storage class (UMS) via USB0 instance of
USB on AM64x SoC. UMS allows USB host to access U-Boot block device
and enable file transfer.
Example usage of UMS command :
=> mmc list
mmc@fa10000: 0 (eMMC)
mmc@fa00000: 1
=> ums 0 mmc 1
UMS: LUN 0, dev mmc 1, hwpart 0, sector 0x0, count 0x3b72400
Signed-off-by: Hrushikesh Salunke <h-salunke@ti.com>
Mocha was added and tested right before this config option was added. Add
it to restore proper booting.
Fixes: d6a53f52 ("spl: Add an SPL_HAVE_INIT_STACK option")
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Ouya was added and tested right before this config option was added. Add it
to restore proper booting.
Fixes: d6a53f52 ("spl: Add an SPL_HAVE_INIT_STACK option")
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Without 'nvme scan' the ESP on the NVMe drive is not found early.
EFI variables cannot be persisted.
Hit any key to stop autoboot: 0
Cannot persist EFI variables without system partition
** Booting bootflow '<NULL>' with efi_mgr
Loading Boot0000 'mmc 0' failed
EFI boot manager: Cannot load any image
Boot failed (err=-14)
scanning bus for devices...
** Booting bootflow 'nvme#1.blk#1.bootdev.part_1' with efi
Booting /\EFI\BOOT\BOOTRISCV64.EFI
error: no suitable video mode found.
GNU GRUB version 2.12
With 'nmve scan' booting works as expected.
Hit any key to stop autoboot: 0
** Booting bootflow '<NULL>' with efi_mgr
Loading Boot0000 'mmc 0' failed
Loading Boot0001 'nvme 0' failed
Booting: nvme 1
error: no suitable video mode found.
GNU GRUB version 2.12
Reported by Yuri Zaporozhets <yuriz@vodafonemail.de>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
qcom-next-20230324:
* msm8916 gets proper sysreset and spin-table support
* The first new IPQ platform is added - the IPQ9574. The IPQ series are
used in routers. The flashing process is also documented
* mach-snapdragon gains the ability to boot with an internal FDT and
still parse memory from an externally provided one
* SC7280 gets a pinctrl driver and various clock driver improvements.
* Qualcom clock drivers will now actually return an error when
attempting
to enable a clock which isn't described.
* Qualcomm pinctrl drivers will now return an error when attempting to
configure an invalid function mux
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/25267
- Allow the registration and enablement of the i.MX UART clocks via DM,
without the need of manually calling init_uart_clk().
- Remove duplicated 'mmc dev ${mmcdev}' commands.
- Rework some of the RAM related Kconfig symbols for phycore_imx8mp.
In preparation to remove manual references for enabling some clocks,
enable SPL_CLK_IMX8MP which automatically enables SPL_CCF and
SPL_CLK_COMPOSITE_CCF which permit various drivers to activate
their respective clocks automatically.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
The Ouya microconsole is build on Nvidia Tegra 3 (T33) SoC, featuring a
quad-core 1.7 GHz ARM Cortex-A9 CPU and a ULP GeForce GPU, paired with 1GB
of DDR3 RAM and 8GB of internal flash storage. Running a modified Android
4.1 (Jelly Bean) OS with a custom launcher, it aimed for open-source gaming
via a digital storefront.
This implementation is mostly based on upstream Linux device tree and
fragments of work done by previous developers.
Co-developed-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Upgrade HTC One X device tree to comply possible upstream Linux device
tree. Once Linux catches up, HTC One X can be switched to OF_UPSTREAM.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Upgrade LG P895 and P880 device tree bindings according to preliminary
upstream Linux tree. Once Linux catches up, LG X3 can be switched to
OF_UPSTREAM without regressions.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Enable support for USB 2.0, USB 1.1 and USB storage devices on the
Renesas RZ/G2L EVK.
Also enable the 'usb' command to support USB scanning and debugging.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
This config includes the phycore_am62ax_r5_defconfig file as well as
the am62x_r5_usbdfu.config fragment. We need another defconfig
because the AM62Ax has not enough internal SRAM to support all boot
sources. The normal phycore_am62ax_r5_defconfig should allow to boot
from MMC and OSPI while this new defconfig allows to boot from USB.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Enable raw & on disk capsule updates and provide configs required
for updating MTD devices. Also resync after savedefconfig.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
On fast models, the CRC32 feature is disabled by default. When enabled
in U-Boot, it leads to synchronous aborts due to unrecognized
instructions. This change ensures CRC32 is disabled by default to
maintain compatibility.
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Currently this platform implicity builds CONFIG_TPL_DM_I2C support
without setting the symbol. Add it for clarity.
Signed-off-by: Tom Rini <trini@konsulko.com>
Since removing reset_cpu() in mach-snapdragon, all Qualcomm platforms
now depend on CONFIG_SYSRESET and will fail to build without it.
Move the dependency from qcom_defconfig to kconfig so that we use
SYSRESET for all platforms.
Fixes: 61a1a1b8ca ("mach-snapdragon: use PSCI sysreset driver")
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
