"fastboot flash" tries to malloc 8 MiB buffer after receiving data over
USB and trying to write it to eMMC. Right now only 8.12 MiB malloc is
available for E850-96 overall, which leads to this issue:
Malloc failed for: CHUNK_TYPE_RAW
Fix it by increasing malloc pool size from 8.12 MiB up to 32 MiB, like
it's done in many other boards using fastboot.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/27149
- Add support for the NXP imx93 frdm board.
- imx93_evk and phycore-imx93 cleanups.
- Convert imx6dl-sielaff to OF_UPSTREAM and fix serial download mode boot.
- Fix crash in imx power-domain.
- Migrate Phytec imx8mm boards to standard boot.
- Fix smatch warnings.
Commit 86acdce2ba ("common: add config for board_init() call")
introduced CONFIG_BOARD_INIT option. This option can be disabled for the
boards where board_init() function is not needed. Remove empty
board_init() calls for all boards where it's possible, and disable
CONFIG_BOARD_INIT in all related defconfigs.
This cleanup was made semi-automatically using these scripts: [1].
No functional change, but the binary size for the modified boards is
reduced a bit.
[1] https://github.com/joe-skb7/uboot-convert-scripts/tree/master/remove-board-init
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm_beacon
Tested-by: Bryan Brattlof <bb@ti.com>
Acked-by: Peng Fan <peng.fan@nxp.com> #NXP boards
AMD/Xilinx/FPGA changes for v2025.10-rc1 v2
zynqmp:
- Generate fit-dtb.blob all the time
- Simplify power-domain driver bind
zynqmp_mini:
- Remove PSCI_RESET
fpga:
- Improve user feedback in case of FPGA bitstream load failure
misc:
- Fix kernel-doc in gpio zynq and axi_mrmac
spi:
- Revert fix in STIG mode
[trini: Remove CONFIG_FPGA_VERSALPL=y from sandbox due to
sandbox+clang+asan test problem]
Signed-off-by: Tom Rini <trini@konsulko.com>
remove boot logic from shared env file for phyboard-polis and
phygate-tauri.
Adjust configs for both boards as well.
Space at the beginning of addressable RAM is reserved for space used via
standard boot env variables. CONFIG_SYS_LOAD_ADDR is set to the lowest
address behind the standard boot variables reserved space.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
We need to set CONFIG_SDP_LOADADDR to a reasonable value in order
to successfully load the U-Boot proper image in SPL via SDP.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Acked-by: Peng Fan <peng.fan@nxp.com>
As part of splitting the i.MX parts of FSL_ESDHC out from the more
legacy parts, the FSL_ESDHC_IMX symbol was added. This platform is the
only one which was not converted correctly.
Fixes: e37ac717d7 ("Convert to use fsl_esdhc_imx for i.MX platforms")
Signed-off-by: Tom Rini <trini@konsulko.com>
Enable standard boot for the phycore-imx8mp and use it as default. Add
all variables required for standard boot to the environment.
Signed-off-by: Leonard Anderweit <l.anderweit@phytec.de>
Tested-by: Martin Schwan <m.schwan@phytec.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Enable the network stack, the designware ethernet driver and
corresponding glue driver. The Lichee Pi 4A board ships two RTL8211F
phys, both attached to GMAC 0, thus support for Realtek phys and DM
support for MDIO devices are enabled as well.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
By default DEBUG_UART uses the SBI DBCN extension on S-Mode RISC-V
platforms, but the Icicle Kit's firmware doesn't support it. Since
DEBUG_UART is getting turned on automagically and this is somewhat
misleading, disable it in the Icicle kit's defconfig.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
CONFIG_NR_DRAM_BANKS defines the number of DRAM banks on the
device. The default value of NR_DRAM_BANKS for ARCH_K3 is set to 2
(arch/arm/mach-k3/Kconfig:199) but should be 1 for am62x platforms.
This patch updates NR_DRAM_BANKS value for all am62x platforms to 1.
Fixes: 2969ed31b8 ("configs: Add am62x_beagleplay_*_defconfig")
Fixes: 2d257d9279 ("configs: Add configs for AM62x SK")
Fixes: 085cd6459d ("board: phytec: am62x: Add PHYTEC phyCORE-AM62x SoM")
Fixes: 7d1a10659f ("board: toradex: add verdin am62 support")
Signed-off-by: Anshul Dalal <anshuld@ti.com>
The hook arch_misc_init was not intended to be used for per-board hooks.
This can be done with misc_init_r instead, which is what follows
immediately after arch_misc_init. Switch a few platforms.
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Enable DM_RNG in U-Boot to populate /chosen/kaslr-seed automatically.
Enable OP-TEE, which supports RNG, to provide entropy.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Enable DM_RNG in U-Boot to populate /chosen/kaslr-seed automatically.
Enable OP-TEE, which supports RNG, to provide entropy.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/27010
- Fix the i.MX8M Nano GPU path.
- Enable RNG support for KASLR on Toradex i.MX8 boards.
- Enable watchdog and clock driver for imx6ulz_smm_m2b.
- Tighten dependencies on CMD_BLOB.
- Remove the rest of i.MX31 support.
Add r7s72100 Genmai board support. Serial console, NOR Flash and
Ethernet are known to work however on-board SDRAM is not yet enabled.
Signed-off-by: Magnus Damm <damm@opensource.se>
Split the RZ/A1 GR-PEACH defconfig into board-specific defconfig
and common RZ/A1 SoC defconfig. This is a preparatory patch for
new RZ/A1 boards, no functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Enable the clock framework on the m2b platform as was done
in m2 variant. This helps to increase the NAND controller performance.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Enable DM_RNG in U-Boot to automatically populate /chosen/kaslr-seed
and enable CAAM to provide entropy.
Enable ARCH_MISC_INIT to initialize the CAAM job ring.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Enable DM_RNG in U-Boot to automatically populate /chosen/kaslr-seed
and enable CAAM to provide entropy.
Enable ARCH_MISC_INIT to initialize the CAAM job ring.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Romain Gantois <romain.gantois@bootlin.com> says:
This is version one of my series which enables Ethernet support on the BBGE
board. This requires three main changes:
- Describing the MAC<->PHY link and DP83867 PHY accurately in the device
tree
- Enabling the RGMII1 pinmux configuration
- Enabling the DP83867 driver
These changes are all applied in patch 2.
Patch 1 enables excluding the DP83867 driver from SPL. This is done to
avoid size issues when adding the DP83867 driver to the am335x-evm
defconfig.
Link: https://lore.kernel.org/r/20250626-bbge-ethernet-v1-0-5b544fb1898f@bootlin.com
Currently, the Ethernet interface of the BBGE board isn't properly
supported.
To support this interface, describe the MAC<->PHY RGMII link and the
DP83867 PHY in the BBGE device tree. Enable the DP83867 PHY driver in
U-Boot Proper and mux the relevant RGMII lines.
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Tested-by: Judith Mendez <jm@ti.com>
João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com> says:
In some use cases, board-specific device tree changes must not be overwritten
by system fixups. Although U-Boot provides ft_board_setup_ex() for this
purpose, it is currently only used on TI Keystone. This series makes
ft_board_setup_ex() a generic option, allowing its use by other architectures
and boards.
Additionally, considering that Toradex Verdin-AM62P hardware lifetime
guarantees are based on a 105°C junction temperature (while TI AM62Px supports
up to 125°C), this series implements necessary changes within TI K3 AM62P and
Toradex board code. These changes include exporting common fixup device Tree
functions used in TI K3 for board-code access and also fixup for AM62P thermal
zones to correctly reflect the number of CPU nodes according to the SoC part
number.
Link: https://lore.kernel.org/r/20250623-am62p-fdt-fixup-trip-points-v1-0-12355eb6a72f@toradex.com
While TI AM62P supports up to 125°C junction temperature, Tj, for
industrial and automotive parts, Toradex Verdin-AM62P hardware lifetime
guarantees consider a 105°C Tj. Fixup the device tree temperature
critical trip points to match the hardware specifications. The
implementation ensures the architecture code will not overwrite the
board specific changes by enabling CONFIG_OF_BOARD_SETUP_EXTENDED for
the Verdin-AM62P.
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Legacy SPI flash devices used a 24-bit (3-byte) addressing scheme,
limiting the addressable memory to 16 MB. To support larger densities
(256 Mbit and higher), extended addressing schemes, such as 32-bit
(4-byte) addressing, were introduced. If the flash density exceeds
16 MB and CONFIG_SPI_FLASH_BAR is disabled, the device will use a
4-byte addressing mode.
Signed-off-by: Prasad Kummari <prasad.kummari@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20250707043738.795179-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Enable the sntp command by default in the arm64 QEMU defconfig for lwIP
since this config is meant to have all the features supported by lwIP.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
