The BootROM on RK3399 only read the first 2 KB of each 4 KB page from
SPI flash. With current FIT payload offset of 0x40000 this limits the
supported TPL+SPL size to only 128 KB.
Change to use 0xE0000 as FIT payload offset, similar to other RK3399
boards, to allow a maximum size for TPL of 192 KB and SPL of 256 KB.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The device tree for rk3066a/rk3188 combined is now
available in the /dts/upstream directory.
Use imply OF_UPSTREAM to migrate all rk3066a/rk3188 boards.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The NanoPi R3S(as "R3S") is an open source platform with dual-Gbps
Ethernet ports designed and developed by FriendlyElec for IoT
applications.
Specification:
- Rockchip RK3566
- 2GB LPDDR4X RAM
- optional 32GB eMMC module
- SD card slot
- 2x 1000 Base-T
- 3x LEDs (POWER, LAN, WAN)
- 2x Buttons (Reset, MaskROM)
- 1x USB 3.0 Port
- Type-C 5V 2A Power
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
After the migration to use standard boot, storage media should
automatically be initialized in the order listed in boot_targets env.
Drop USE_PREBOOT to speed up boot with ~12 seconds when booting from
e.g. SD-card or eMMC.
Before:
3,048,599 2,056 main_loop
3,050,717 2,118 usb_start
15,070,499 12,019,782 cli_loop
After:
3,058,244 2,054 main_loop
3,063,260 5,016 cli_loop
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Current use of SILENT_CONSOLE hide valuable information when something
goes wrong during boot, drop this Kconfig option to allow user to see
e.g. from what media U-Boot proper is loaded from.
A second Model line is printed on console due to DISPLAY_BOARDINFO_LATE,
drop this Kconfig option to remove the second redundant line.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Change to use FIT and FIT_SIGNATURE when loading U-Boot proper in SPL to
allow checksum validation and fallback loading of FIT from a different
mmc device.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Migrate to use common bss, stack and malloc heap size and addresses to
unify memory use in TPL, SPL and pre-reloc.
Ensure SYS_MALLOC_F_LEN and TPL variant stay at 0x2000 and is unaffected
on other boards not changed to use common malloc heap size.
ENV_OFFSET is using the default value of 0x3f8000 and is also dropped.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
For some reason the Ethernet PHY reset delay is set to 1 second, this
cause an unneccecery long boot delay.
Firefly-RK3288 use RTL8211 Ethernet PHY, datasheet list an initial 10ms
delay and then a 30-76ms delay before accessing registers.
Change to use 80ms delay instead of a full second to speed up Ethernet
initializion in U-Boot.
Also enable PHY_REALTEK, DM_ETH_PHY and PHY_GIGE to improve Ethernet PHY
support in U-Boot.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add missing Kconfig options used by the rk3288-tinker-s variant.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The device tree for Firefly-RK3288 in dts/upstream can be used as-is by
U-Boot, migrate board to use OF_UPSTREAM.
Add chosen stdout-path prop to board u-boot.dtsi as it is missing in DT
from dts/upstream. Also change to use the upstream power_led symbol.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Enable MISC_INIT_R and ROCKCHIP_EFUSE to read cpuid from efuse and set
the cpuid# and serial# env vars.
Change to read mac address from eeprom in rockchip_early_misc_init_r()
to ensure the ethaddr env var is set before rockchip_setup_macaddr() try
to set ethaddr based on cpuid.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
After the migration to use standard boot, storage media devices should
automatically be initialized in the order listed in boot_targets env.
Drop USE_PREBOOT to speed up boot when booting from SD-card or eMMC.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Current use of SILENT_CONSOLE hide valuable information when something
goes wrong during boot, drop this Kconfig option to allow user to see
e.g. from what media U-Boot proper is loaded from.
A second Model line is printed on console due to DISPLAY_BOARDINFO_LATE,
drop this Kconfig option to remove the second redundant line.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The sdmmc power come from vcc33_sd pmic regulator and not from the
vcc_sd fixed regulator, as currently defined in the in-tree DT.
Drop vcc_sd and the related gpio7 and sdmmc_pwr nodes from being
included in SPL along with any related Kconfig option. Also enable
SPL_DM_SEQ_ALIAS to ensure aliases is handled correctly in SPL.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add bootph props and enable related Kconfig options to include the sdmmc
regulator in SPL. Also enable SPL_DM_SEQ_ALIAS to ensure aliases is
handled correctly in SPL.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add bootph- props to emmc, sdmmc, uart and related pinctrl nodes to
ensure devices and pinctrl can be used in xPL and U-Boot pre-reloc.
Remove the explicit bootph-all prop from the pinctrl node, any bootph-
prop will automatically be propagated to the pinctrl node.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Migrate to use common bss, stack and malloc heap size and addresses to
unify memory use in TPL, SPL and pre-reloc.
ENV_OFFSET is using the default value of 0x3f8000 and is also dropped.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Enable Kconfig options to read cpuid from efuse and set cpuid#, serial#
and ethaddr env vars based on the value read from efuse.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The boot timing and reporting (bootstage) infrastructure is useful for
performance analysis and debug but adds overhead and console noise when
using the device normally. Remove it from the device config.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Khadas Edge2 is a Rockchip RK3588S based SBC (Single Board Computer)
by Khadas.
There are tree variants depending on the DRAM size : 8G and 16G.
Specification:
Rockchip RK3588S SoC
4x ARM Cortex-A76, 4x ARM Cortex-A55
8/16GB memory LPDDR4x
Mali G610MP4 GPU
3x MIPI CSI 4x lanes
2x MIPI-DSI DPHY 4x lanes
32/64GB eMMC
1x USB 2.0, 1x USB 3.0, 2x USB-Type-C
1x HDMI 2.1 output, 1x DP 1.4 output
USB PD over USB Type-C
Kernel commit:
04d552993522 ("arm64: dts: rockchip: Add Khadas edge2 board")
Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>
Change to use FIT and FIT_SIGNATURE when loading U-Boot proper in SPL to
allow checksum validation and fallback loading of FIT from a different
mmc device.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
For some reason the Ethernet PHY reset delay is set to 1 second, this
cause an unneccecery long boot delay.
MiQi use RTL8211 Ethernet PHY, datasheet list an initial 10ms delay and
then a 30-76ms delay before accessing registers.
Change to use 80ms delay instead of a full second to speed up Ethernet
initializion in U-Boot.
Also enable PHY_REALTEK, DM_ETH_PHY and PHY_GIGE to improve Ethernet PHY
support in U-Boot.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The device tree for mqmaker MiQi in dts/upstream can be used as-is by
U-Boot, migrate board to OF_UPSTREAM.
The change to use DT from dts/upstream will include minor changes and
fixes related to work led and usb otg.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
After the migration to use standard boot, storage media devices should
automatically be initialized in the order listed in boot_targets env.
Drop USE_PREBOOT to speed up boot when booting from SD-card or eMMC.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Current use of SILENT_CONSOLE hide valuable information when something
goes wrong during boot, drop this Kconfig option to allow user to see
e.g. from what media U-Boot proper is loaded from.
A second Model line is printed on console due to DISPLAY_BOARDINFO_LATE,
drop this Kconfig option to remove the second redundant line.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add bootph props and enable related Kconfig options to include the sdmmc
regulator in SPL. Also enable SPL_DM_SEQ_ALIAS to ensure aliases is
handled correctly in SPL.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add bootph- props to emmc, sdmmc, uart and related pinctrl nodes to
ensure devices and pinctrl can be used in xPL and U-Boot pre-reloc.
Remove the explicit bootph-all prop from the pinctrl node, any bootph-
prop will automatically be propagated to the pinctrl node.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Migrate to use TPL, common bss, stack and malloc heap size and addresses
to unify memory use in TPL, SPL and pre-reloc.
ENV_OFFSET is using the default value of 0x3f8000 and is also dropped.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Enable Kconfig options to read cpuid from efuse and set cpuid#, serial#
and ethaddr env vars based on the value read from efuse.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Change to use FIT and FIT_SIGNATURE when loading U-Boot proper in SPL to
allow checksum validation and fallback loading of FIT from a different
mmc device.
Checksum validation of FIT adds around 140 ms to boot time:
Before:
Mark Elapsed Stage
0 0 reset
13 13 TPL
6,957 6,944 end tpl
25,102 18,145 SPL
131,932 106,830 end phase
132,137 205 board_init_f
444,277 312,140 board_init_r
1,404,987 960,710 eth_common_init
1,519,110 114,123 eth_initialize
1,524,734 5,624 main_loop
1,525,452 718 cli_loop
After:
Mark Elapsed Stage
0 0 reset
13 13 TPL
6,957 6,944 end tpl
35,744 28,787 SPL
271,220 235,476 end phase
271,420 200 board_init_f
588,474 317,054 board_init_r
1,548,950 960,476 eth_common_init
1,663,105 114,155 eth_initialize
1,668,734 5,629 main_loop
1,669,417 683 cli_loop
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
For some reason the Ethernet PHY reset delay is set to 1 second, this
cause an unneccecery long boot delay.
Tinker Board use RTL8211E or RTL8211F Ethernet PHY, datasheet list an
initial 10ms delay and then a 30-76ms delay before accessing registers.
Change to use 80ms delay instead of a full second to speed up Ethernet
initializion in U-Boot.
Also enable PHY_REALTEK, DM_ETH_PHY and PHY_GIGE to improve Ethernet PHY
support in U-Boot.
Before:
1,404,971 960,924 eth_common_init
2,438,830 1,033,859 eth_initialize
2,444,449 5,619 main_loop
2,445,153 704 cli_loop
After:
1,404,987 960,710 eth_common_init
1,519,110 114,123 eth_initialize
1,524,734 5,624 main_loop
1,525,452 718 cli_loop
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The device tree for ASUS Tinker Board and S variant in dts/upstream can
be used as-is by U-Boot, migrate board to OF_UPSTREAM.
The change to use DT from dts/upstream will include minor changes and
fixes related to leds and regulators.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Pull request efi-next-20250105
Documentation:
* doc: develop: Fix typos and wording in binman/binman.rst
* doc: develop: Fix typos and wording in gdb.rst
* doc: sandbox: Fix the "sb" command name
* doc/develop/distro.rst: Better document upstream definition of extlinux.conf
UEFI:
* efi_loader: avoid writing message in Exit() boot service
* efi_loader: update EFI specification version
* cmd: efidebug: update output of memory attributes
* efi_loader: Don't warn if the TCG2 FinalEvents table is not installed
* cmd: bootmenu: add parameter -e for UEFI boot options
* efi_loader: Update startimage_exit self-test to check error
* efi: Correct ECPT table GUID
Others:
Building the API demo application for riscv64 is supported.
* API: unify platform_sys_info() implementations
* examples: implement _start and syscall for RISC-V
* examples: use architecture specific memset() on RISC-V
* examples: use QEMU compatible LOAD_ADDR on RISC-V
* test: fix test_extension.py
* configs: sandbox_deconfig: remove CONFIG_AMIGA_PARTITION
* CI: xilinx_versal_virt: disable USB_DWC3
* net: eth_bootdev_hunt() should not run DHCP
Judith Mendez <jm@ti.com> says:
This patch series adds config options for Sitara K3 boards
to support MMC UHS modes.
While testing with SD card boot and eMMC boot,
found missing eMMC boot support for am62ax in am62a7_init,
patch 1/7, and missing config option to support eMMC boot.
While we are here, for am62ax, enable config option to
change MMC bus modes and enable r5 SDHCI ADMA for faster boot
time.
Also for all k3 Sitara boards, cleanup MMC ENV configs that
are no longer needed since we no longer load env from MMC
device.
Link: https://lore.kernel.org/r/20241220203704.2076499-1-jm@ti.com
We do not actually test the code.
Scanning for Amiga partitions of the sandbox is extremely slow,
especially on the partially implemented USB device.
For build testing the other sandbox defconfigs are good enough.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Enable MMC_SPEED_MODE_SET config option in defconfig to enable
changing MMC bus modes with mmc rescan for am62ax device.
Signed-off-by: Judith Mendez <jm@ti.com>
Move to using OF_UPSTREAM config and thus using the devicetree
subtree and remove unused device tree files.
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
It is annoying to have sandbox enter a boot loop when an assertion
fails. Hang instead, since then the error message is only printed once
and Ctrl-C can be used to quit, as per normal.
Signed-off-by: Simon Glass <sjg@chromium.org>
Enable remoteproc command and APMU remoteproc driver to start Cortex-R52
cores from U-Boot command line. Code on the Cortex-R52 #0 can be started
as follows, code on other cores can be started by passing the correct ID
to 'rproc load' and 'rproc start' to select the core:
"
=> rproc init
=> rproc list
0 - Name:'rcar-apmu-cr52.0-apmu@e6170000' type:'internal memory mapped' supports: load start stop reset is_running
1 - Name:'rcar-apmu-cr52.1-apmu@e6170000' type:'internal memory mapped' supports: load start stop reset is_running
2 - Name:'rcar-apmu-cr52.2-apmu@e6170000' type:'internal memory mapped' supports: load start stop reset is_running
=> rproc load 0 0xeb200000 0x10000
Load Remote Processor 0 with data@addr=0xeb200000 65536 bytes: Success!
=> rproc start 0
"
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Add support for building U-Boot SPL for Renesas R-Car Gen4 R8A779G0 V4H SoC.
The SPL initializes the DBSC5 DRAM controller, RT-VRAM and loads and starts
U-Boot proper on the Cortex-A76 core.
The SoC BootROM can not boot the CA76 core directly, instead the SPL starts
on the CR52 core which immediately brings up the CA76 core, which in turn
starts executing the actual SPL. This is achieved by placing a tiny bit of
precompiled Aarch32 code at the very beginning of the SPL. The code consists
of some 32 instructions, uses APMU to configure CA76 start address to offset
0x80 Bytes from start of the SPL, and uses APMU to start the CA76 core. The
code parts the CR52 core in an endless loop once the CA76 core got started.
The 32 instructions are completely arbitrary number, so is the offset 0x80
Bytes from start of SPL, because 0x80 = 128 decimal and 128 / 4 bytes per
instruction is 32 instructions. The 32 instructions turned out to be enough
to started the CA76 and 0x80 is nicely aligned.
Once the SPL completes hardware initialization, the SPL loads U-Boot proper.
The u-boot.itb proper fitImage contains 64bit build on u-boot-nodtb.bin and
a DT for R8A779G0 V4H White Hawk board and is generated by binman. The
u-boot.itb is loaded from SPI NOR offset 0x80000.
In order to install this setup on an existing R8A779G0 V4H White Hawk board,
build using r8a779g0_whitehawk_defconfig, generate SPI NOR image flash.bin
and write flash.bin to SPI NOR offset 0x0 . Finally, configure board MD pin
switches according to the R8A779G0 V4H White Hawk board documentation for
40 MHz SPI NOR boot using DMA and restart the board.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
With VBE we want to use FIT in all phases of the boot. Add Kconfig
options to support this.
Disable the options for sandbox_vpl for now.
Signed-off-by: Simon Glass <sjg@chromium.org>
