Allows run-time control over watchdog auto-start and the timeout via
setting the environment variable watchdog_timeout_ms. A value of zero
means "do not start". Use CONFIG_WATCHDOG_TIMEOUT_MSECS as initial value.
Users can enable the watchdog to monitor the boot process until userspace
or OS takes over to serve the watchdog.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Commit 86acdce2ba ("common: add config for board_init() call")
introduced CONFIG_BOARD_INIT option. This option can be disabled for the
boards where board_init() function is not needed. Remove empty
board_init() calls for all boards where it's possible, and disable
CONFIG_BOARD_INIT in all related defconfigs.
This cleanup was made semi-automatically using these scripts: [1].
No functional change, but the binary size for the modified boards is
reduced a bit.
[1] https://github.com/joe-skb7/uboot-convert-scripts/tree/master/remove-board-init
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm_beacon
Tested-by: Bryan Brattlof <bb@ti.com>
Acked-by: Peng Fan <peng.fan@nxp.com> #NXP boards
CONFIG_NR_DRAM_BANKS defines the number of DRAM banks on the
device. The default value of NR_DRAM_BANKS for ARCH_K3 is set to 2
(arch/arm/mach-k3/Kconfig:199) but should be 1 for am62x platforms.
This patch updates NR_DRAM_BANKS value for all am62x platforms to 1.
Fixes: 2969ed31b8 ("configs: Add am62x_beagleplay_*_defconfig")
Fixes: 2d257d9279 ("configs: Add configs for AM62x SK")
Fixes: 085cd6459d ("board: phytec: am62x: Add PHYTEC phyCORE-AM62x SoM")
Fixes: 7d1a10659f ("board: toradex: add verdin am62 support")
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Use default value of malloc size coming from Kconfig, instead of
board specific override.
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Use ENV_MMC_DEVICE_INDEX to clarify this is the SD/MMC device
index, a number, as enumerated by U-Boot. Update the help text
accordingly.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
This config was defined with the default value of 8 MiB. However,
the default value is different when CONFIG_ARM64 is enabled and
should be 64 MiB.
Remove this config from the A53 defconfig and use the correct
default config.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
SPL_TEXT_BASE is used as the load address for the main domain SPL on k3
platforms.
Since the config value is the same for every board, this patch sets the
value 0x80080000 as default for all 64-bit ARCH_K3, 0x43c00000 as
default for the R5 cores and deletes the instances of SPL_TEXT_BASE in
individual defconfigs.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
The AM62x uses the DA8XX (DaVinci) GPIO controller. Enable
CONFIG_DA8XX_GPIO to support GPIO access from the Cortex-A53.
Also enable the 'gpio' command to allow users to interact
with GPIOs from the U-Boot shell.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
This enables the 'rproc' command, allowing users to
start, stop, and manage co-processors as well as load firmware
images.
Useful for systems with auxiliary cores, such as the M4 core
in the AM62x soc.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Add support for ethernet boot in the A53 SPL. Increase the SPL Size
limit and update SPL_STACK_R_ADDR.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Enable ENV_IS_IN_SPI_FLASH to read the environment from the SPI
flash when booting from it. The oftree, kernel and ramdisk sizes
are located in this environment and therefore required to boot
an initramfs.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Enable raw & on disk capsule updates and provide configs required
for updating MTD devices. Also resync after savedefconfig.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Wadim Egorov <w.egorov@phytec.de> says:
Our SoMs are available in multiple configurations, managed via device
tree overlays. To determine the specific variant in use, we read the
EEPROM and apply the appropriate overlays during boot to the device tree
used by the OS.
Apply overlays for phyCORE-AM62x and phyCORE-AM64x SoMs.
Future K3 SoMs will be able to reuse this logic and overlays.
Link: https://lore.kernel.org/r/20241030164815.1763506-1-w.egorov@phytec.de
Daniel Schultz <d.schultz@phytec.de> says:
This patch stack extends the phyCORE-AM62x/AM64x U-Boot by following boot
sources:
- Load U-Boot with USB DFU
- Load a Linux and initramfs from OSPI/QSPI NOR flash
- Load a Linux and rootfs from Network
Moreover, it adds required changes to the environment to boot an A/B
system with RAUC and includes some minor fixes.
Commit 371b379edb ("configs: Make USB_GADGET_MANUFACTURER
consistent over all PHYTEC boards") made the USB_GADGET_MANUFACTURER
value consistent over all PHYTEC boards.
Update the phyCORE-AM62x defconfigs to make this config consistent
as well.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
The environment should have a size of 0x20000 instead 0x2000.
Update to have the same environment size for all PHYTEC K3 products.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Merge the am62x_a53_usbdfu.config into the phyCORE-AM62x A53 defconfig to
properly support USB DFU boot.
This config was made with the following command:
make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- \
phycore_am62x_a53_defconfig am62x_a53_usbdfu.config
However, CONFIG_USB_GADGET_MANUFACTURER was not merged to keep Phytec
as manufacturer.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
The phyCORE-AM62x board code sets an environment variable 'boot'
with the device U-Boot booted from. Use this variable in
CONFIG_BOOTCOMMAND to boot Linux from the same boot device by
default.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Make the raw-mode options depend on SPL_SYS_MMCSD_RAW_MODE in a more
direct way. This makes it easier to understand the options with
'make menuconfig'.
There are three different ways of specifying the offset:
- sector offset
- partition number
- partition type
So make these a choice, so it is more obvious what is going on.
Update existing boards to enable SPL_SYS_MMCSD_RAW_MODE where needed.
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
Add i2c and rtc commands with all dependencies which are
required for testing.
Additionally, add smc and cache commands to boot Zephyr on the A53.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Enable mtd command and remove SPI NOR flashes we do not
populate on our SoMs.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Daniel Schultz <d.schultz@phytec.de>
Enable configs required for booting via DFU.
Configs taken from the am62x_a53_usbdfu.config config fragment.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Daniel Schultz <d.schultz@phytec.de>
Update environment location to align with OSPI fixed-partition
definitions and provide a redundant environment at a 2nd location.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Daniel Schultz <d.schultz@phytec.de>
Copy fixed-partitions nodes from U-Boot device tree to OS device tree.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Daniel Schultz <d.schultz@phytec.de>
Use content of EEPROM to detect the actual RAM size and adjust
DDR timings, size and banks accordingly.
Also enable the SoM detection per default in the defconfigs.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Tested-by: John Ma <jma@phytec.com>
Enable CONFIG_ENV_OVERWRITE to overwrite ethaddr in the environment.
This is required because our environment is not located in the
boot partition.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
The phycore-am62x can be migrated to OF_UPSTREAM.
Drop redundant device tree files, update MAINTAINERS and
defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Select environment location based on the device we boot from.
Also, introduce a "boot" variable that represents the current boot
device and can be used by scripts.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
There is a default ATF load address that is used for devices that have
ATF running in SRAM. For AM62 and AM62a, ATF runs from DRAM. Instead
of having to override the address in every defconfig, make add a
default for these ATF in DRAM devices.
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
The help for CONFIG_MTD explains that it needs to be enabled for various
things like NAND, etc to be available. It however then doesn't enforce
this dependency and so if you have none of these systems present you
still need to disable a number of options. Fix this by making places
that select/imply one type of flash, but did not do the same, also do
this for "MTD". Make boards which hadn't been enabling MTD already but
need it now, do so. In a few places, disable CONFIG_CMD_MTDPARTS as it
wasn't previously enabled but was now being implied.
Signed-off-by: Tom Rini <trini@konsulko.com>
