forked from OERV-BSP/u-boot
ARM: dts: at91: sam9x60: Move pinmux node to board DTS
Move pinmux nodes defined under the pinctrl node from sam9x60 SoC DT to its board specific DTS files. Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com> Reviewed-by: Eugen Hristev <eugen.hristev@linaro.org>
This commit is contained in:
Manikandan Muralidharan
committed by
Eugen Hristev
Eugen Hristev
parent
5451d21ac2
commit
4e9eaf5371
@@ -82,6 +82,11 @@
|
||||
};
|
||||
};
|
||||
|
||||
&dbgu {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_dbgu>;
|
||||
};
|
||||
|
||||
&ebi {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_0_7>;
|
||||
@@ -171,10 +176,20 @@
|
||||
|
||||
&macb0 {
|
||||
phy-mode = "rmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_macb0_rmii>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
dbgu {
|
||||
pinctrl_dbgu: dbgu-0 {
|
||||
atmel,pins =
|
||||
<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
|
||||
AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
||||
};
|
||||
};
|
||||
|
||||
ebi {
|
||||
pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
|
||||
atmel,pins =
|
||||
@@ -217,6 +232,22 @@
|
||||
};
|
||||
};
|
||||
|
||||
macb0 {
|
||||
pinctrl_macb0_rmii: macb0_rmii-0 {
|
||||
atmel,pins =
|
||||
<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */
|
||||
AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */
|
||||
AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */
|
||||
AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */
|
||||
AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */
|
||||
AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */
|
||||
AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
|
||||
AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
|
||||
AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
|
||||
AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */
|
||||
};
|
||||
};
|
||||
|
||||
nand {
|
||||
pinctrl_nand_oe_we: nand-oe-we-0 {
|
||||
atmel,pins =
|
||||
@@ -240,6 +271,36 @@
|
||||
<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
|
||||
};
|
||||
|
||||
sdhci0 {
|
||||
pinctrl_sdhci0: sdhci0 {
|
||||
atmel,pins =
|
||||
<AT91_PIOA 17 AT91_PERIPH_A
|
||||
(AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA17 CK periph A with pullup */
|
||||
AT91_PIOA 16 AT91_PERIPH_A
|
||||
(AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA16 CMD periph A with pullup */
|
||||
AT91_PIOA 15 AT91_PERIPH_A
|
||||
(AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA15 DAT0 periph A */
|
||||
AT91_PIOA 18 AT91_PERIPH_A
|
||||
(AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA18 DAT1 periph A with pullup */
|
||||
AT91_PIOA 19 AT91_PERIPH_A
|
||||
(AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA19 DAT2 periph A with pullup */
|
||||
AT91_PIOA 20 AT91_PERIPH_A
|
||||
(AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>; /* PA20 DAT3 periph A with pullup */
|
||||
};
|
||||
};
|
||||
|
||||
sdhci1 {
|
||||
pinctrl_sdhci1: sdhci1 {
|
||||
atmel,pins =
|
||||
<AT91_PIOA 13 AT91_PERIPH_B (AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA13 CK periph B */
|
||||
AT91_PIOA 12 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA12 CMD periph B with pullup */
|
||||
AT91_PIOA 11 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA11 DAT0 periph B with pullup */
|
||||
AT91_PIOA 2 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA2 DAT1 periph B with pullup */
|
||||
AT91_PIOA 3 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA3 DAT2 periph B with pullup */
|
||||
AT91_PIOA 4 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>; /* PA4 DAT3 periph B with pullup */
|
||||
};
|
||||
};
|
||||
|
||||
usb1 {
|
||||
pinctrl_usb_default: usb_default {
|
||||
atmel,pins = <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
|
||||
@@ -248,6 +309,16 @@
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_sdhci0>;
|
||||
};
|
||||
|
||||
&sdhci1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_sdhci1>;
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
num-ports = <3>;
|
||||
atmel,vbus-gpio = <0
|
||||
|
||||
@@ -123,8 +123,6 @@
|
||||
assigned-clock-rates = <100000000>;
|
||||
assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* ID_PLL_A_DIV */
|
||||
bus-width = <4>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_sdhci0>;
|
||||
};
|
||||
|
||||
sdhci1: sdhci-host@90000000 {
|
||||
@@ -136,8 +134,6 @@
|
||||
assigned-clock-rates = <100000000>;
|
||||
assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* ID_PLL_A_DIV */
|
||||
bus-width = <4>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_sdhci1>;
|
||||
};
|
||||
|
||||
apb {
|
||||
@@ -177,8 +173,6 @@
|
||||
macb0: ethernet@f802c000 {
|
||||
compatible = "cdns,sam9x60-macb", "cdns,macb";
|
||||
reg = <0xf802c000 0x100>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_macb0_rmii>;
|
||||
clock-names = "hclk", "pclk";
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>;
|
||||
status = "disabled";
|
||||
@@ -211,8 +205,6 @@
|
||||
dbgu: serial@fffff200 {
|
||||
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
|
||||
reg = <0xfffff200 0x200>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_dbgu>;
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
|
||||
clock-names = "usart";
|
||||
};
|
||||
@@ -226,61 +218,6 @@
|
||||
0xfffff600 0x200 /* pioB */
|
||||
0xfffff800 0x200 /* pioC */
|
||||
0xfffffa00 0x200>; /* pioD */
|
||||
|
||||
/* shared pinctrl settings */
|
||||
dbgu {
|
||||
pinctrl_dbgu: dbgu-0 {
|
||||
atmel,pins =
|
||||
<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
|
||||
AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
||||
};
|
||||
};
|
||||
|
||||
macb0 {
|
||||
pinctrl_macb0_rmii: macb0_rmii-0 {
|
||||
atmel,pins =
|
||||
<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */
|
||||
AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */
|
||||
AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */
|
||||
AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */
|
||||
AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */
|
||||
AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */
|
||||
AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
|
||||
AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
|
||||
AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
|
||||
AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */
|
||||
};
|
||||
};
|
||||
|
||||
sdhci0 {
|
||||
pinctrl_sdhci0: sdhci0 {
|
||||
atmel,pins =
|
||||
<AT91_PIOA 17 AT91_PERIPH_A
|
||||
(AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA17 CK periph A with pullup */
|
||||
AT91_PIOA 16 AT91_PERIPH_A
|
||||
(AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA16 CMD periph A with pullup */
|
||||
AT91_PIOA 15 AT91_PERIPH_A
|
||||
(AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA15 DAT0 periph A */
|
||||
AT91_PIOA 18 AT91_PERIPH_A
|
||||
(AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA18 DAT1 periph A with pullup */
|
||||
AT91_PIOA 19 AT91_PERIPH_A
|
||||
(AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA19 DAT2 periph A with pullup */
|
||||
AT91_PIOA 20 AT91_PERIPH_A
|
||||
(AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>; /* PA20 DAT3 periph A with pullup */
|
||||
};
|
||||
};
|
||||
|
||||
sdhci1 {
|
||||
pinctrl_sdhci1: sdhci1 {
|
||||
atmel,pins =
|
||||
<AT91_PIOA 13 AT91_PERIPH_B (AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA13 CK periph B */
|
||||
AT91_PIOA 12 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA12 CMD periph B with pullup */
|
||||
AT91_PIOA 11 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA11 DAT0 periph B with pullup */
|
||||
AT91_PIOA 2 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA2 DAT1 periph B with pullup */
|
||||
AT91_PIOA 3 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA3 DAT2 periph B with pullup */
|
||||
AT91_PIOA 4 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>; /* PA4 DAT3 periph B with pullup */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pioA: gpio@fffff400 {
|
||||
|
||||
@@ -82,6 +82,11 @@
|
||||
};
|
||||
};
|
||||
|
||||
&dbgu {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_dbgu>;
|
||||
};
|
||||
|
||||
&ebi {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_0_7>;
|
||||
@@ -149,11 +154,21 @@
|
||||
|
||||
&macb0 {
|
||||
phy-mode = "rmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_macb0_rmii>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
/* shared pinctrl settings */
|
||||
dbgu {
|
||||
pinctrl_dbgu: dbgu-0 {
|
||||
atmel,pins =
|
||||
<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
|
||||
AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
||||
};
|
||||
};
|
||||
|
||||
qspi {
|
||||
pinctrl_qspi: qspi {
|
||||
atmel,pins =
|
||||
@@ -212,11 +227,57 @@
|
||||
};
|
||||
};
|
||||
|
||||
macb0 {
|
||||
pinctrl_macb0_rmii: macb0_rmii-0 {
|
||||
atmel,pins =
|
||||
<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */
|
||||
AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */
|
||||
AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */
|
||||
AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */
|
||||
AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */
|
||||
AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */
|
||||
AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
|
||||
AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
|
||||
AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
|
||||
AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl_onewire_tm_default: onewire_tm_default {
|
||||
atmel,pins =
|
||||
<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
|
||||
};
|
||||
|
||||
sdhci0 {
|
||||
pinctrl_sdhci0: sdhci0 {
|
||||
atmel,pins =
|
||||
<AT91_PIOA 17 AT91_PERIPH_A
|
||||
(AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA17 CK periph A with pullup */
|
||||
AT91_PIOA 16 AT91_PERIPH_A
|
||||
(AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA16 CMD periph A with pullup */
|
||||
AT91_PIOA 15 AT91_PERIPH_A
|
||||
(AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA15 DAT0 periph A */
|
||||
AT91_PIOA 18 AT91_PERIPH_A
|
||||
(AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA18 DAT1 periph A with pullup */
|
||||
AT91_PIOA 19 AT91_PERIPH_A
|
||||
(AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA19 DAT2 periph A with pullup */
|
||||
AT91_PIOA 20 AT91_PERIPH_A
|
||||
(AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>; /* PA20 DAT3 periph A with pullup */
|
||||
};
|
||||
};
|
||||
|
||||
sdhci1 {
|
||||
pinctrl_sdhci1: sdhci1 {
|
||||
atmel,pins =
|
||||
<AT91_PIOA 13 AT91_PERIPH_B (AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA13 CK periph B */
|
||||
AT91_PIOA 12 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA12 CMD periph B with pullup */
|
||||
AT91_PIOA 11 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA11 DAT0 periph B with pullup */
|
||||
AT91_PIOA 2 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA2 DAT1 periph B with pullup */
|
||||
AT91_PIOA 3 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA3 DAT2 periph B with pullup */
|
||||
AT91_PIOA 4 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>; /* PA4 DAT3 periph B with pullup */
|
||||
};
|
||||
};
|
||||
|
||||
usb1 {
|
||||
pinctrl_usb_default: usb_default {
|
||||
atmel,pins = <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
|
||||
@@ -225,6 +286,16 @@
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_sdhci0>;
|
||||
};
|
||||
|
||||
&sdhci1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_sdhci1>;
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
num-ports = <3>;
|
||||
atmel,vbus-gpio = <0
|
||||
|
||||
Reference in New Issue
Block a user