MBa is a series of Carrier Boards / Single Board Computers (SBC) for
evaluation of TQMa SoMs.
The MBa7 carrier board can only interface with TQMa7 modules.
The TQMa7 module can only be mounted with NXP i.MX7 Solo or Dual SoCs.
Primary compatible strings are of the form "tq,<SoC>-<SBC>".
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The simple framebuffer is a binding that allows the bootloader to setup a
framebuffer, describe it in the Device Tree for the OS to pick it up and
use it as is.
Replace the current binding by a schema to allow the validation tools to
check those nodes.
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>
The MBUS controller drives the MBUS that other devices in the SoC will
use to perform DMA. It also has a register interface that allows to
monitor and control the bandwidth and priorities for masters on that
bus.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>
The current DT bindings assume that the DMA will be performed by the
devices through their parent DT node, and rely on that assumption for the
address translation using dma-ranges.
However, some SoCs have devices that will perform DMA through another bus,
with separate address translation rules. We therefore need to express that
relationship, through the special interconnect name "dma-mem".
Acked-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Finally have a reason for a backmerge other than "it's been a while"!
Backmerging drm-next to -misc-next to facilitate Rob Herring's work on
Panfrost.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Devicetree binding reviews have a lot of repeated review comments. Much
of the guidelines aren't written down. This list of do's and don't's is
by no means an exhaustive guide for how to write bindings, but at least
the "rules" are written down in some form.
Signed-off-by: Rob Herring <robh@kernel.org>
There never was a device called LTC3651, it always was just LT3651.
This circumstance makes it pretty difficult to identify what this
driver is meant to control.channges since
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add the bindings for the Bifrost family of ARM Mali GPUs.
The Bifrost GPU architecture is similar to the Midgard family,
but with a different Shader Core & Execution Engine structures.
Bindings are based on the Midgard family bindings, but the inner
architectural changes makes it a separate family needing separate
bindings.
The Bifrost GPUs are present in a number of recent SoCs, like the
Amlogic G12A Family, and many other vendors.
The Amlogic vendor specific compatible is added to handle the
specific IP integration differences and dependencies.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
[narmstrong: fixed small typo in compatible description]
Link: https://patchwork.freedesktop.org/patch/msgid/20190401080949.14550-1-narmstrong@baylibre.com
Add new Xunlong Orange Pi 3 board compatible string to the bindings
documentation.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Beelink GS1 device-tree has been introduced.
Add it to the sunxi yaml documentation.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Shenzhen AZW Technology Co. Ltd. is a manufacturer specialized in Android
smart TV boxes, Intel mini PCs and home cloud TV boxes with NAS.
Add the vendor prefix for AZW.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
HI3670 SoC is architecturally same as the HI3660 SoC. Hence, the same
K3 specific designware driver is reused for HI3670 SoC and the binding
is documented with fallback approach for compatible property.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
HI3670 SoC is architecturally same as the HI3660 SoC. Hence, the same
driver is reused for HI3670 SoC and the binding is documented here which
uses the fallback approach.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
gpio: updates for v5.2 (part 1)
- batch of improvements for the vf610 driver which shrink the code and
make use of resource managed helpers
- support for a new variant of pca953x
- make gpio-mockup buildable on systems without IOMEM
- make gpio-74x164 more flexible by using generic device properties
plus minor improvements
- new driver for Mellanox BlueField
- fixes for wakeup GPIOs in gpio-omap
- use devm_platform_ioremap_resource() in gpio-mxc
- a couple improvements of kernel docs for ACPI code
- don't WARN() in gpiod_put() on optional GPIOs
In the iMX7d datasheet, the PAD_CTL_DSE_X* values are different from
the documentation.
Changes since v2:
* Changed patch title to 'dt-bindings: pinctrl: imx7d:'
Signed-off-by: Christina Quast <cquast@hanoverdisplays.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tegra SPI controller has TX and RX trimmers to tuning the delay of
SPI master clock with respect to the data.
TX and RX tap values are based on the platform validation across the
PVT and the trimmer values vary based on the trace lengths to the
corresponding SPI devices.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull ARM SoC fixes from Olof Johansson:
"A collection of fixes from the last few weeks. Most of them are
smaller tweaks and fixes to DT and hardware descriptions for boards.
Some of the more significant ones are:
- eMMC and RGMII stability tweaks for rk3288
- DDC fixes for Rock PI 4
- Audio fixes for two TI am335x eval boards
- D_CAN clock fix for am335x
- Compilation fixes for clang
- !HOTPLUG_CPU compilation fix for one of the new platforms this
release (milbeaut)
- A revert of a gpio fix for nomadik that instead was fixed in the
gpio subsystem
- Whitespace fix for the DT JSON schema (no tabs allowed)"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
ARM: milbeaut: fix build with !CONFIG_HOTPLUG_CPU
ARM: iop: don't use using 64-bit DMA masks
ARM: orion: don't use using 64-bit DMA masks
Revert "ARM: dts: nomadik: Fix polarity of SPI CS"
dt-bindings: cpu: Fix JSON schema
arm/mach-at91/pm : fix possible object reference leak
ARM: dts: at91: Fix typo in ISC_D0 on PC9
ARM: dts: Fix dcan clkctrl clock for am3
reset: meson-audio-arb: Fix missing .owner setting of reset_controller_dev
dt-bindings: reset: meson-g12a: Add missing USB2 PHY resets
ARM: dts: rockchip: Remove #address/#size-cells from rk3288-veyron gpio-keys
ARM: dts: rockchip: Remove #address/#size-cells from rk3288 mipi_dsi
ARM: dts: rockchip: Fix gpu opp node names for rk3288
ARM: dts: am335x-evmsk: Correct the regulators for the audio codec
ARM: dts: am335x-evm: Correct the regulators for the audio codec
ARM: OMAP2+: add missing of_node_put after of_device_is_available
ARM: OMAP1: ams-delta: Fix broken GPIO ID allocation
arm64: dts: stratix10: add the sysmgr-syscon property from the gmac's
arm64: dts: rockchip: fix rk3328 sdmmc0 write errors
arm64: dts: rockchip: fix rk3328 rgmii high tx error rate
...
Commit fd73403a48 ("dt-bindings: arm: Add SMP enable-method for
Milbeaut") added support for a new cpu enable-method, but did so using
tabulations to ident. This is however invalid in the syntax, and resulted
in a failure when trying to use that schemas for validation.
Use spaces instead of tabs to indent to fix this.
Fixes: fd73403a48 ("dt-bindings: arm: Add SMP enable-method for Milbeaut")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Add the lm3532 device tree documentation.
Remove lm3532 device tree reference from the ti_lmu devicetree
documentation.
With the addition of the dedicated lm3532 documentation the device
can be removed from the ti_lmu.txt.
The reason for this is that the lm3532 dt documentation now defines
the ability to control LED output strings against different control
banks or groups multiple strings to be controlled by a single control
bank.
Another addition was for ALS lighting control and configuration. The
LM3532 has a feature that can take in the ALS reading from 2 separate
ALS devices and adjust the brightness on the strings that are configured
to support this feature.
Finally the device specific properties were moved to the parent node
as these properties are not control bank configurable. These include
the runtime ramp and the ALS configuration.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Add documentation for the device tree bindings of the MDIO mux of Amlogic
g12a SoC family
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the syscon-reboot driver accept value and mask instead of
just value.
Prior to this patch, the property name for the value was 'mask'. If
only the mask property is defined on a node, maintain compatibility
by using it as the value.
This patch is based on commit
f2c199db47 ("power: reset: syscon-poweroff: add a mask property")
and does the same change for the syscon-reboot driver.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add new compatible strings for the g12a devices.
Audio wise, the g12a is fairly to close to the axg, yet some differences
need to be handled.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
drm-misc-next for 5.2:
UAPI Changes:
-syncobj: Add TIMELINE_WAIT|QUERY|TRANSFER|TIMELINE_SIGNAL ioctls (Chunming)
-Clarify that 1.0 can be represented by drm_color_lut (Daniel)
Cross-subsystem Changes:
-dt-bindings: Add binding for rk3066 hdmi (Johan)
-dt-bindings: Add binding for Feiyang FY07024DI26A30-D panel (Jagan)
-dt-bindings: Add Rocktech vendor prefix and jh057n00900 panel bindings (Guido)
-MAINTAINERS: Add lima and ASPEED entries (Joel & Qiang)
Core Changes:
-memory: use dma_alloc_coherent when mem encryption is active (Christian)
-dma_buf: add support for a dma_fence chain (Christian)
-shmem_gem: fix off-by-one bug in new shmem gem helpers (Dan)
Driver Changes:
-rockchip: Add support for rk3066 hdmi (Johan)
-ASPEED: Add driver supporting ASPEED BMC display controller to drm (Joel)
-lima: Add driver supporting Arm Mali4xx gpus to drm (Qiang)
-vc4/v3d: Various cleanups and improved error handling (Eric)
-panel: Add support for Feiyang FY07024DI26A30-D MIPI-DSI panel (Jagan)
-panel: Add support for Rocktech jh057n00900 MIPI-DSI panel (Guido)
Cc: Johan Jonker <jbx6244@gmail.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Joel Stanley <joel@jms.id.au>
[airlied: fixed XA limit build breakage, Rodrigo also submitted the same patch, but
I squashed it in the merge.]
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190404201016.GA139524@art_vandelay
This patch introduces common thermocouple types used by various
temperature sensors. Also a brief documentation explaining this
"thermocouple-type" property.
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
devantech-srf04.yaml: yaml devicetree binding for iio ultrasonic
proximity driver of devantech srf04
use devantech-srf04.txt, transform binding into yaml and remove the
outdated DT documentation
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add doc for dt binding maxbotix,mb1232. This binding is for MaxBotix
I2CXL-MaxSonar ultrasonic rangers which share a common i2c interface.
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Jonathan Neuschäfer