8e9a400c706ee5bcbc052d3ec9f87cfdbbd3f5cb
14302
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Liu Xiang
|
d2dfbe47fa |
mm/gup.c: fix comments of __get_user_pages() and get_user_pages_remote()
Fix comments of __get_user_pages() and get_user_pages_remote(), make them more clear. Link: http://lkml.kernel.org/r/1572443533-3118-1-git-send-email-liuxiang_1999@126.com Signed-off-by: Liu Xiang <liuxiang_1999@126.com> Suggested-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
zhong jiang
|
b96cc65515 |
mm/gup.c: allow CMA migration to propagate errors back to caller
check_and_migrate_cma_pages() was recording the result of __get_user_pages_locked() in an unsigned "nr_pages" variable. Because __get_user_pages_locked() returns a signed value that can include negative errno values, this had the effect of hiding errors. Change check_and_migrate_cma_pages() implementation so that it uses a signed variable instead, and propagates the results back to the caller just as other gup internal functions do. This was discovered with the help of unsigned_lesser_than_zero.cocci. Link: http://lkml.kernel.org/r/1571671030-58029-1-git-send-email-zhongjiang@huawei.com Signed-off-by: zhong jiang <zhongjiang@huawei.com> Suggested-by: John Hubbard <jhubbard@nvidia.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Konstantin Khlebnikov
|
9266a14033 |
mm/filemap.c: warn if stale pagecache is left after direct write
generic_file_direct_write() tries to invalidate pagecache after O_DIRECT write. Unlike to similar code in dio_complete() this silently ignores error returned from invalidate_inode_pages2_range(). According to comment this code here because not all filesystems call dio_complete() to do proper invalidation after O_DIRECT write. Noticeable example is a blkdev_direct_IO(). This patch calls dio_warn_stale_pagecache() if invalidation fails. Link: http://lkml.kernel.org/r/157270038294.4812.2238891109785106069.stgit@buzz Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Konstantin Khlebnikov
|
a92853b674 |
fs/direct-io.c: keep dio_warn_stale_pagecache() when CONFIG_BLOCK=n
This helper prints warning if direct I/O write failed to invalidate cache,
and set EIO at inode to warn usersapce about possible data corruption.
See also commit
|
||
|
Konstantin Khlebnikov
|
80c1fe9026 |
mm/filemap.c: remove redundant cache invalidation after async direct-io write
generic_file_direct_write() invalidates cache at entry. Second time this should be done when request completes. But this function calls second invalidation at exit unconditionally even for async requests. This patch skips second invalidation for async requests (-EIOCBQUEUED). Link: http://lkml.kernel.org/r/157270037850.4812.15036239021726025572.stgit@buzz Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Yu Zhao
|
dd98afd4d6 |
mm/slub.c: clean up validate_slab()
The function doesn't need to return any value, and the check can be done in one pass. There is a behavior change: before the patch, we stop at the first invalid free object; after the patch, we stop at the first invalid object, free or in use. This shouldn't matter because the original behavior isn't intended anyway. Link: http://lkml.kernel.org/r/20191108193958.205102-1-yuzhao@google.com Signed-off-by: Yu Zhao <yuzhao@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Yu Zhao
|
aed6814894 |
mm/slub.c: update comments
Slub doesn't use PG_active and PG_error anymore. Link: http://lkml.kernel.org/r/20191007222023.162256-1-yuzhao@google.com Signed-off-by: Yu Zhao <yuzhao@google.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Miles Chen
|
e1b70dd1e6 |
mm: slub: print the offset of fault addresses
With commit
|
||
|
Pengfei Li
|
13657d0ad9 |
mm, slab_common: use enum kmalloc_cache_type to iterate over kmalloc caches
The type of local variable *type* of new_kmalloc_cache() should be enum kmalloc_cache_type instead of int, so correct it. Link: http://lkml.kernel.org/r/1569241648-26908-4-git-send-email-lpf.vector@gmail.com Signed-off-by: Pengfei Li <lpf.vector@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Pengfei Li
|
dc0a7f7558 |
mm, slab: remove unused kmalloc_size()
The size of kmalloc can be obtained from kmalloc_info[], so remove kmalloc_size() that will not be used anymore. Link: http://lkml.kernel.org/r/1569241648-26908-3-git-send-email-lpf.vector@gmail.com Signed-off-by: Pengfei Li <lpf.vector@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Pengfei Li
|
cb5d9fb38c |
mm, slab: make kmalloc_info[] contain all types of names
Patch series "mm, slab: Make kmalloc_info[] contain all types of names", v6.
There are three types of kmalloc, KMALLOC_NORMAL, KMALLOC_RECLAIM
and KMALLOC_DMA.
The name of KMALLOC_NORMAL is contained in kmalloc_info[].name,
but the names of KMALLOC_RECLAIM and KMALLOC_DMA are dynamically
generated by kmalloc_cache_name().
Patch1 predefines the names of all types of kmalloc to save
the time spent dynamically generating names.
These changes make sense, and the time spent by new_kmalloc_cache()
has been reduced by approximately 36.3%.
Time spent by new_kmalloc_cache()
(CPU cycles)
5.3-rc7 66264
5.3-rc7+patch 42188
This patch (of 3):
There are three types of kmalloc, KMALLOC_NORMAL, KMALLOC_RECLAIM and
KMALLOC_DMA.
The name of KMALLOC_NORMAL is contained in kmalloc_info[].name, but the
names of KMALLOC_RECLAIM and KMALLOC_DMA are dynamically generated by
kmalloc_cache_name().
This patch predefines the names of all types of kmalloc to save the time
spent dynamically generating names.
Besides, remove the kmalloc_cache_name() that is no longer used.
Link: http://lkml.kernel.org/r/1569241648-26908-2-git-send-email-lpf.vector@gmail.com
Signed-off-by: Pengfei Li <lpf.vector@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Linus Torvalds
|
aa32f11691 |
Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull hmm updates from Jason Gunthorpe:
"This is another round of bug fixing and cleanup. This time the focus
is on the driver pattern to use mmu notifiers to monitor a VA range.
This code is lifted out of many drivers and hmm_mirror directly into
the mmu_notifier core and written using the best ideas from all the
driver implementations.
This removes many bugs from the drivers and has a very pleasing
diffstat. More drivers can still be converted, but that is for another
cycle.
- A shared branch with RDMA reworking the RDMA ODP implementation
- New mmu_interval_notifier API. This is focused on the use case of
monitoring a VA and simplifies the process for drivers
- A common seq-count locking scheme built into the
mmu_interval_notifier API usable by drivers that call
get_user_pages() or hmm_range_fault() with the VA range
- Conversion of mlx5 ODP, hfi1, radeon, nouveau, AMD GPU, and Xen
GntDev drivers to the new API. This deletes a lot of wonky driver
code.
- Two improvements for hmm_range_fault(), from testing done by Ralph"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
mm/hmm: remove hmm_range_dma_map and hmm_range_dma_unmap
mm/hmm: make full use of walk_page_range()
xen/gntdev: use mmu_interval_notifier_insert
mm/hmm: remove hmm_mirror and related
drm/amdgpu: Use mmu_interval_notifier instead of hmm_mirror
drm/amdgpu: Use mmu_interval_insert instead of hmm_mirror
drm/amdgpu: Call find_vma under mmap_sem
nouveau: use mmu_interval_notifier instead of hmm_mirror
nouveau: use mmu_notifier directly for invalidate_range_start
drm/radeon: use mmu_interval_notifier_insert
RDMA/hfi1: Use mmu_interval_notifier_insert for user_exp_rcv
RDMA/odp: Use mmu_interval_notifier_insert()
mm/hmm: define the pre-processor related parts of hmm.h even if disabled
mm/hmm: allow hmm_range to be used with a mmu_interval_notifier or hmm_mirror
mm/mmu_notifier: add an interval tree notifier
mm/mmu_notifier: define the header pre-processor parts even if disabled
mm/hmm: allow snapshot of the special zero page
|
||
|
Linus Torvalds
|
d5bb349dbb |
Merge tag 'drm-vmwgfx-coherent-2019-11-29' of git://anongit.freedesktop.org/drm/drm
Pull drm coherent memory support for vmwgfx from Dave Airlie: "This is a separate pull for the mm pagewalking + drm/vmwgfx work Thomas did and you were involved in, I've left it separate in case you don't feel as comfortable with it as the other stuff. It has mm acks/r-b in the right places from what I can see" * tag 'drm-vmwgfx-coherent-2019-11-29' of git://anongit.freedesktop.org/drm/drm: drm/vmwgfx: Add surface dirty-tracking callbacks drm/vmwgfx: Implement an infrastructure for read-coherent resources drm/vmwgfx: Use an RBtree instead of linked list for MOB resources drm/vmwgfx: Implement an infrastructure for write-coherent resources mm: Add write-protect and clean utilities for address space ranges mm: Add a walk_page_mapping() function to the pagewalk code mm: pagewalk: Take the pagetable lock in walk_pte_range() mm: Remove BUG_ON mmap_sem not held from xxx_trans_huge_lock() drm/ttm: Convert vm callbacks to helpers drm/ttm: Remove explicit typecasts of vm_private_data |
||
|
Bharata B Rao
|
33cf170715 |
mm: ksm: Export ksm_madvise()
On PEF-enabled POWER platforms that support running of secure guests, secure pages of the guest are represented by device private pages in the host. Such pages needn't participate in KSM merging. This is achieved by using ksm_madvise() call which need to be exported since KVM PPC can be a kernel module. Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> |
||
|
Dave Airlie
|
0a6cad5df5 |
Merge branch 'vmwgfx-coherent' of git://people.freedesktop.org/~thomash/linux into drm-next
Graphics APIs like OpenGL 4.4 and Vulkan require the graphics driver to provide coherent graphics memory, meaning that the GPU sees any content written to the coherent memory on the next GPU operation that touches that memory, and the CPU sees any content written by the GPU to that memory immediately after any fence object trailing the GPU operation is signaled. Paravirtual drivers that otherwise require explicit synchronization needs to do this by hooking up dirty tracking to pagefault handlers and buffer object validation. Provide mm helpers needed for this and that also allow for huge pmd- and pud entries (patch 1-3), and the associated vmwgfx code (patch 4-7). The code has been tested and exercised by a tailored version of mesa where we disable all explicit synchronization and assume graphics memory is coherent. The performance loss varies of course; a typical number is around 5%. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thomas_os@shipmail.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191113131639.4653-1-thomas_os@shipmail.org |
||
|
Linus Torvalds
|
168829ad09 |
Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- A comprehensive rewrite of the robust/PI futex code's exit handling
to fix various exit races. (Thomas Gleixner et al)
- Rework the generic REFCOUNT_FULL implementation using
atomic_fetch_* operations so that the performance impact of the
cmpxchg() loops is mitigated for common refcount operations.
With these performance improvements the generic implementation of
refcount_t should be good enough for everybody - and this got
confirmed by performance testing, so remove ARCH_HAS_REFCOUNT and
REFCOUNT_FULL entirely, leaving the generic implementation enabled
unconditionally. (Will Deacon)
- Other misc changes, fixes, cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
lkdtm: Remove references to CONFIG_REFCOUNT_FULL
locking/refcount: Remove unused 'refcount_error_report()' function
locking/refcount: Consolidate implementations of refcount_t
locking/refcount: Consolidate REFCOUNT_{MAX,SATURATED} definitions
locking/refcount: Move saturation warnings out of line
locking/refcount: Improve performance of generic REFCOUNT_FULL code
locking/refcount: Move the bulk of the REFCOUNT_FULL implementation into the <linux/refcount.h> header
locking/refcount: Remove unused refcount_*_checked() variants
locking/refcount: Ensure integer operands are treated as signed
locking/refcount: Define constants for saturation and max refcount values
futex: Prevent exit livelock
futex: Provide distinct return value when owner is exiting
futex: Add mutex around futex exit
futex: Provide state handling for exec() as well
futex: Sanitize exit state handling
futex: Mark the begin of futex exit explicitly
futex: Set task::futex_state to DEAD right after handling futex exit
futex: Split futex_mm_release() for exit/exec
exit/exec: Seperate mm_release()
futex: Replace PF_EXITPIDONE with a state
...
|
||
|
Linus Torvalds
|
386403a115 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from David Miller:
"Another merge window, another pull full of stuff:
1) Support alternative names for network devices, from Jiri Pirko.
2) Introduce per-netns netdev notifiers, also from Jiri Pirko.
3) Support MSG_PEEK in vsock/virtio, from Matias Ezequiel Vara
Larsen.
4) Allow compiling out the TLS TOE code, from Jakub Kicinski.
5) Add several new tracepoints to the kTLS code, also from Jakub.
6) Support set channels ethtool callback in ena driver, from Sameeh
Jubran.
7) New SCTP events SCTP_ADDR_ADDED, SCTP_ADDR_REMOVED,
SCTP_ADDR_MADE_PRIM, and SCTP_SEND_FAILED_EVENT. From Xin Long.
8) Add XDP support to mvneta driver, from Lorenzo Bianconi.
9) Lots of netfilter hw offload fixes, cleanups and enhancements,
from Pablo Neira Ayuso.
10) PTP support for aquantia chips, from Egor Pomozov.
11) Add UDP segmentation offload support to igb, ixgbe, and i40e. From
Josh Hunt.
12) Add smart nagle to tipc, from Jon Maloy.
13) Support L2 field rewrite by TC offloads in bnxt_en, from Venkat
Duvvuru.
14) Add a flow mask cache to OVS, from Tonghao Zhang.
15) Add XDP support to ice driver, from Maciej Fijalkowski.
16) Add AF_XDP support to ice driver, from Krzysztof Kazimierczak.
17) Support UDP GSO offload in atlantic driver, from Igor Russkikh.
18) Support it in stmmac driver too, from Jose Abreu.
19) Support TIPC encryption and auth, from Tuong Lien.
20) Introduce BPF trampolines, from Alexei Starovoitov.
21) Make page_pool API more numa friendly, from Saeed Mahameed.
22) Introduce route hints to ipv4 and ipv6, from Paolo Abeni.
23) Add UDP segmentation offload to cxgb4, Rahul Lakkireddy"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1857 commits)
libbpf: Fix usage of u32 in userspace code
mm: Implement no-MMU variant of vmalloc_user_node_flags
slip: Fix use-after-free Read in slip_open
net: dsa: sja1105: fix sja1105_parse_rgmii_delays()
macvlan: schedule bc_work even if error
enetc: add support Credit Based Shaper(CBS) for hardware offload
net: phy: add helpers phy_(un)lock_mdio_bus
mdio_bus: don't use managed reset-controller
ax88179_178a: add ethtool_op_get_ts_info()
mlxsw: spectrum_router: Fix use of uninitialized adjacency index
mlxsw: spectrum_router: After underlay moves, demote conflicting tunnels
bpf: Simplify __bpf_arch_text_poke poke type handling
bpf: Introduce BPF_TRACE_x helper for the tracing tests
bpf: Add bpf_jit_blinding_enabled for !CONFIG_BPF_JIT
bpf, testing: Add various tail call test cases
bpf, x86: Emit patchable direct jump as tail call
bpf: Constant map key tracking for prog array pokes
bpf: Add poke dependency tracking for prog array maps
bpf: Add initial poke descriptor table for jit images
bpf: Move owner type, jited info into array auxiliary data
...
|
||
|
Linus Torvalds
|
4ba380f616 |
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"Apart from the arm64-specific bits (core arch and perf, new arm64
selftests), it touches the generic cow_user_page() (reviewed by
Kirill) together with a macro for x86 to preserve the existing
behaviour on this architecture.
Summary:
- On ARMv8 CPUs without hardware updates of the access flag, avoid
failing cow_user_page() on PFN mappings if the pte is old. The
patches introduce an arch_faults_on_old_pte() macro, defined as
false on x86. When true, cow_user_page() makes the pte young before
attempting __copy_from_user_inatomic().
- Covert the synchronous exception handling paths in
arch/arm64/kernel/entry.S to C.
- FTRACE_WITH_REGS support for arm64.
- ZONE_DMA re-introduced on arm64 to support Raspberry Pi 4
- Several kselftest cases specific to arm64, together with a
MAINTAINERS update for these files (moved to the ARM64 PORT entry).
- Workaround for a Neoverse-N1 erratum where the CPU may fetch stale
instructions under certain conditions.
- Workaround for Cortex-A57 and A72 errata where the CPU may
speculatively execute an AT instruction and associate a VMID with
the wrong guest page tables (corrupting the TLB).
- Perf updates for arm64: additional PMU topologies on HiSilicon
platforms, support for CCN-512 interconnect, AXI ID filtering in
the IMX8 DDR PMU, support for the CCPI2 uncore PMU in ThunderX2.
- GICv3 optimisation to avoid a heavy barrier when accessing the
ICC_PMR_EL1 register.
- ELF HWCAP documentation updates and clean-up.
- SMC calling convention conduit code clean-up.
- KASLR diagnostics printed during boot
- NVIDIA Carmel CPU added to the KPTI whitelist
- Some arm64 mm clean-ups: use generic free_initrd_mem(), remove
stale macro, simplify calculation in __create_pgd_mapping(), typos.
- Kconfig clean-ups: CMDLINE_FORCE to depend on CMDLINE, choice for
endinanness to help with allmodconfig"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (93 commits)
arm64: Kconfig: add a choice for endianness
kselftest: arm64: fix spelling mistake "contiguos" -> "contiguous"
arm64: Kconfig: make CMDLINE_FORCE depend on CMDLINE
MAINTAINERS: Add arm64 selftests to the ARM64 PORT entry
arm64: kaslr: Check command line before looking for a seed
arm64: kaslr: Announce KASLR status on boot
kselftest: arm64: fake_sigreturn_misaligned_sp
kselftest: arm64: fake_sigreturn_bad_size
kselftest: arm64: fake_sigreturn_duplicated_fpsimd
kselftest: arm64: fake_sigreturn_missing_fpsimd
kselftest: arm64: fake_sigreturn_bad_size_for_magic0
kselftest: arm64: fake_sigreturn_bad_magic
kselftest: arm64: add helper get_current_context
kselftest: arm64: extend test_init functionalities
kselftest: arm64: mangle_pstate_invalid_mode_el[123][ht]
kselftest: arm64: mangle_pstate_invalid_daif_bits
kselftest: arm64: mangle_pstate_invalid_compat_toggle and common utils
kselftest: arm64: extend toplevel skeleton Makefile
drivers/perf: hisi: update the sccl_id/ccl_id for certain HiSilicon platform
arm64: mm: reserve CMA and crashkernel in ZONE_DMA32
...
|
||
|
Andrii Nakryiko
|
ed81745a4c |
mm: Implement no-MMU variant of vmalloc_user_node_flags
To fix build with !CONFIG_MMU, implement it for no-MMU configurations as well.
Fixes:
|
||
|
Christoph Hellwig
|
93f4e735b6 |
mm/hmm: remove hmm_range_dma_map and hmm_range_dma_unmap
These two functions have never been used since they were added. Link: https://lore.kernel.org/r/20191113134528.21187-1-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> |
||
|
Ralph Campbell
|
d28c2c9a48 |
mm/hmm: make full use of walk_page_range()
hmm_range_fault() calls find_vma() and walk_page_range() in a loop. This is unnecessary duplication since walk_page_range() calls find_vma() in a loop already. Simplify hmm_range_fault() by defining a walk_test() callback function to filter unhandled vmas. This also fixes a bug where hmm_range_fault() was not checking start >= vma->vm_start before checking vma->vm_flags so hmm_range_fault() could return an error based on the wrong vma for the requested range. It also fixes a bug when the vma has no read access and the caller did not request a fault, there shouldn't be any error return code. Link: https://lore.kernel.org/r/20191104222141.5173-2-rcampbell@nvidia.com Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> |
||
|
Jason Gunthorpe
|
a22dd50640 |
mm/hmm: remove hmm_mirror and related
The only two users of this are now converted to use mmu_interval_notifier, delete all the code and update hmm.rst. Link: https://lore.kernel.org/r/20191112202231.3856-14-jgg@ziepe.ca Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Tested-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> |
||
|
Jason Gunthorpe
|
04ec32fbc2 |
mm/hmm: allow hmm_range to be used with a mmu_interval_notifier or hmm_mirror
hmm_mirror's handling of ranges does not use a sequence count which
results in this bug:
CPU0 CPU1
hmm_range_wait_until_valid(range)
valid == true
hmm_range_fault(range)
hmm_invalidate_range_start()
range->valid = false
hmm_invalidate_range_end()
range->valid = true
hmm_range_valid(range)
valid == true
Where the hmm_range_valid() should not have succeeded.
Adding the required sequence count would make it nearly identical to the
new mmu_interval_notifier. Instead replace the hmm_mirror stuff with
mmu_interval_notifier.
Co-existence of the two APIs is the first step.
Link: https://lore.kernel.org/r/20191112202231.3856-4-jgg@ziepe.ca
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Tested-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
||
|
Jason Gunthorpe
|
99cb252f5e |
mm/mmu_notifier: add an interval tree notifier
Of the 13 users of mmu_notifiers, 8 of them use only invalidate_range_start/end() and immediately intersect the mmu_notifier_range with some kind of internal list of VAs. 4 use an interval tree (i915_gem, radeon_mn, umem_odp, hfi1). 4 use a linked list of some kind (scif_dma, vhost, gntdev, hmm) And the remaining 5 either don't use invalidate_range_start() or do some special thing with it. It turns out that building a correct scheme with an interval tree is pretty complicated, particularly if the use case is synchronizing against another thread doing get_user_pages(). Many of these implementations have various subtle and difficult to fix races. This approach puts the interval tree as common code at the top of the mmu notifier call tree and implements a shareable locking scheme. It includes: - An interval tree tracking VA ranges, with per-range callbacks - A read/write locking scheme for the interval tree that avoids sleeping in the notifier path (for OOM killer) - A sequence counter based collision-retry locking scheme to tell device page fault that a VA range is being concurrently invalidated. This is based on various ideas: - hmm accumulates invalidated VA ranges and releases them when all invalidates are done, via active_invalidate_ranges count. This approach avoids having to intersect the interval tree twice (as umem_odp does) at the potential cost of a longer device page fault. - kvm/umem_odp use a sequence counter to drive the collision retry, via invalidate_seq - a deferred work todo list on unlock scheme like RTNL, via deferred_list. This makes adding/removing interval tree members more deterministic - seqlock, except this version makes the seqlock idea multi-holder on the write side by protecting it with active_invalidate_ranges and a spinlock To minimize MM overhead when only the interval tree is being used, the entire SRCU and hlist overheads are dropped using some simple branches. Similarly the interval tree overhead is dropped when in hlist mode. The overhead from the mandatory spinlock is broadly the same as most of existing users which already had a lock (or two) of some sort on the invalidation path. Link: https://lore.kernel.org/r/20191112202231.3856-3-jgg@ziepe.ca Acked-by: Christian König <christian.koenig@amd.com> Tested-by: Philip Yang <Philip.Yang@amd.com> Tested-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> |
||
|
Jakub Kicinski
|
a9f852e92e |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Minor conflict in drivers/s390/net/qeth_l2_main.c, kept the lock from commit |
||
|
Andrey Ryabinin
|
9a63236f1a |
mm/ksm.c: don't WARN if page is still mapped in remove_stable_node()
It's possible to hit the WARN_ON_ONCE(page_mapped(page)) in
remove_stable_node() when it races with __mmput() and squeezes in
between ksm_exit() and exit_mmap().
WARNING: CPU: 0 PID: 3295 at mm/ksm.c:888 remove_stable_node+0x10c/0x150
Call Trace:
remove_all_stable_nodes+0x12b/0x330
run_store+0x4ef/0x7b0
kernfs_fop_write+0x200/0x420
vfs_write+0x154/0x450
ksys_write+0xf9/0x1d0
do_syscall_64+0x99/0x510
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Remove the warning as there is nothing scary going on.
Link: http://lkml.kernel.org/r/20191119131850.5675-1-aryabinin@virtuozzo.com
Fixes:
|
||
|
David Hildenbrand
|
7ce700bf11 |
mm/memory_hotplug: don't access uninitialized memmaps in shrink_zone_span()
Let's limit shrinking to !ZONE_DEVICE so we can fix the current code. We should never try to touch the memmap of offline sections where we could have uninitialized memmaps and could trigger BUGs when calling page_to_nid() on poisoned pages. There is no reliable way to distinguish an uninitialized memmap from an initialized memmap that belongs to ZONE_DEVICE, as we don't have anything like SECTION_IS_ONLINE we can use similar to pfn_to_online_section() for !ZONE_DEVICE memory. E.g., set_zone_contiguous() similarly relies on pfn_to_online_section() and will therefore never set a ZONE_DEVICE zone consecutive. Stopping to shrink the ZONE_DEVICE therefore results in no observable changes, besides /proc/zoneinfo indicating different boundaries - something we can totally live with. Before commit |
||
|
David S. Miller
|
ee5a489fd9 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-11-20 The following pull-request contains BPF updates for your *net-next* tree. We've added 81 non-merge commits during the last 17 day(s) which contain a total of 120 files changed, 4958 insertions(+), 1081 deletions(-). There are 3 trivial conflicts, resolve it by always taking the chunk from |
||
|
Andrii Nakryiko
|
fc9702273e |
bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY
Add ability to memory-map contents of BPF array map. This is extremely useful
for working with BPF global data from userspace programs. It allows to avoid
typical bpf_map_{lookup,update}_elem operations, improving both performance
and usability.
There had to be special considerations for map freezing, to avoid having
writable memory view into a frozen map. To solve this issue, map freezing and
mmap-ing is happening under mutex now:
- if map is already frozen, no writable mapping is allowed;
- if map has writable memory mappings active (accounted in map->writecnt),
map freezing will keep failing with -EBUSY;
- once number of writable memory mappings drops to zero, map freezing can be
performed again.
Only non-per-CPU plain arrays are supported right now. Maps with spinlocks
can't be memory mapped either.
For BPF_F_MMAPABLE array, memory allocation has to be done through vmalloc()
to be mmap()'able. We also need to make sure that array data memory is
page-sized and page-aligned, so we over-allocate memory in such a way that
struct bpf_array is at the end of a single page of memory with array->value
being aligned with the start of the second page. On deallocation we need to
accomodate this memory arrangement to free vmalloc()'ed memory correctly.
One important consideration regarding how memory-mapping subsystem functions.
Memory-mapping subsystem provides few optional callbacks, among them open()
and close(). close() is called for each memory region that is unmapped, so
that users can decrease their reference counters and free up resources, if
necessary. open() is *almost* symmetrical: it's called for each memory region
that is being mapped, **except** the very first one. So bpf_map_mmap does
initial refcnt bump, while open() will do any extra ones after that. Thus
number of close() calls is equal to number of open() calls plus one more.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/bpf/20191117172806.2195367-4-andriin@fb.com
|
||
|
David S. Miller
|
19b7e21c55 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Lots of overlapping changes and parallel additions, stuff like that. Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Ralph Campbell
|
6855ac4acd |
mm/debug.c: PageAnon() is true for PageKsm() pages
PageAnon() and PageKsm() use the low two bits of the page->mapping
pointer to indicate the page type. PageAnon() only checks the LSB while
PageKsm() checks the least significant 2 bits are equal to 3.
Therefore, PageAnon() is true for KSM pages. __dump_page() incorrectly
will never print "ksm" because it checks PageAnon() first. Fix this by
checking PageKsm() first.
Link: http://lkml.kernel.org/r/20191113000651.20677-1-rcampbell@nvidia.com
Fixes:
|
||
|
Ralph Campbell
|
76a1850e45 |
mm/debug.c: __dump_page() prints an extra line
When dumping struct page information, __dump_page() prints the page type with a trailing blank followed by the page flags on a separate line: anon flags: 0x100000000090034(uptodate|lru|active|head|swapbacked) It looks like the intent was to use pr_cont() for printing "flags:" but pr_cont() usage is discouraged so fix this by extending the format to include the flags into a single line: anon flags: 0x100000000090034(uptodate|lru|active|head|swapbacked) If the page is file backed, the name might be long so use two lines: shmem_aops name:"dev/zero" flags: 0x10000000008000c(uptodate|dirty|swapbacked) Eliminate pr_conf() usage as well for appending compound_mapcount. Link: http://lkml.kernel.org/r/20191112012608.16926-1-rcampbell@nvidia.com Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Vinayak Menon
|
5df373e956 |
mm/page_io.c: do not free shared swap slots
The following race is observed due to which a processes faulting on a
swap entry, finds the page neither in swapcache nor swap. This causes
zram to give a zero filled page that gets mapped to the process,
resulting in a user space crash later.
Consider parent and child processes Pa and Pb sharing the same swap slot
with swap_count 2. Swap is on zram with SWP_SYNCHRONOUS_IO set.
Virtual address 'VA' of Pa and Pb points to the shared swap entry.
Pa Pb
fault on VA fault on VA
do_swap_page do_swap_page
lookup_swap_cache fails lookup_swap_cache fails
Pb scheduled out
swapin_readahead (deletes zram entry)
swap_free (makes swap_count 1)
Pb scheduled in
swap_readpage (swap_count == 1)
Takes SWP_SYNCHRONOUS_IO path
zram enrty absent
zram gives a zero filled page
Fix this by making sure that swap slot is freed only when swap count
drops down to one.
Link: http://lkml.kernel.org/r/1571743294-14285-1-git-send-email-vinmenon@codeaurora.org
Fixes:
|
||
|
David Hildenbrand
|
2c91f8fc6c |
mm/memory_hotplug: fix try_offline_node()
try_offline_node() is pretty much broken right now: - The node span is updated when onlining memory, not when adding it. We ignore memory that was mever onlined. Bad. - We touch possible garbage memmaps. The pfn_to_nid(pfn) can easily trigger a kernel panic. Bad for memory that is offline but also bad for subsection hotadd with ZONE_DEVICE, whereby the memmap of the first PFN of a section might contain garbage. - Sections belonging to mixed nodes are not properly considered. As memory blocks might belong to multiple nodes, we would have to walk all pageblocks (or at least subsections) within present sections. However, we don't have a way to identify whether a memmap that is not online was initialized (relevant for ZONE_DEVICE). This makes things more complicated. Luckily, we can piggy pack on the node span and the nid stored in memory blocks. Currently, the node span is grown when calling move_pfn_range_to_zone() - e.g., when onlining memory, and shrunk when removing memory, before calling try_offline_node(). Sysfs links are created via link_mem_sections(), e.g., during boot or when adding memory. If the node still spans memory or if any memory block belongs to the nid, we don't set the node offline. As memory blocks that span multiple nodes cannot get offlined, the nid stored in memory blocks is reliable enough (for such online memory blocks, the node still spans the memory). Introduce for_each_memory_block() to efficiently walk all memory blocks. Note: We will soon stop shrinking the ZONE_DEVICE zone and the node span when removing ZONE_DEVICE memory to fix similar issues (access of garbage memmaps) - until we have a reliable way to identify whether these memmaps were properly initialized. This implies later, that once a node had ZONE_DEVICE memory, we won't be able to set a node offline - which should be acceptable. Since commit |
||
|
Song Liu
|
4655e5e5f3 |
mm,thp: recheck each page before collapsing file THP
In collapse_file(), for !is_shmem case, current check cannot guarantee
the locked page is up-to-date. Specifically, xas_unlock_irq() should
not be called before lock_page() and get_page(); and it is necessary to
recheck PageUptodate() after locking the page.
With this bug and CONFIG_READ_ONLY_THP_FOR_FS=y, madvise(HUGE)'ed .text
may contain corrupted data. This is because khugepaged mistakenly
collapses some not up-to-date sub pages into a huge page, and assumes
the huge page is up-to-date. This will NOT corrupt data in the disk,
because the page is read-only and never written back. Fix this by
properly checking PageUptodate() after locking the page. This check
replaces "VM_BUG_ON_PAGE(!PageUptodate(page), page);".
Also, move PageDirty() check after locking the page. Current khugepaged
should not try to collapse dirty file THP, because it is limited to
read-only .text. The only case we hit a dirty page here is when the
page hasn't been written since write. Bail out and retry when this
happens.
syzbot reported bug on previous version of this patch.
Link: http://lkml.kernel.org/r/20191106060930.2571389-2-songliubraving@fb.com
Fixes:
|
||
|
Laura Abbott
|
aea4df4c53 |
mm: slub: really fix slab walking for init_on_free
Commit |
||
|
Roman Gushchin
|
0362f326d8 |
mm: hugetlb: switch to css_tryget() in hugetlb_cgroup_charge_cgroup()
An exiting task might belong to an offline cgroup. In this case an
attempt to grab a cgroup reference from the task can end up with an
infinite loop in hugetlb_cgroup_charge_cgroup(), because neither the
cgroup will become online, neither the task will be migrated to a live
cgroup.
Fix this by switching over to css_tryget(). As css_tryget_online()
can't guarantee that the cgroup won't go offline, in most cases the
check doesn't make sense. In this particular case users of
hugetlb_cgroup_charge_cgroup() are not affected by this change.
A similar problem is described by commit
|
||
|
Roman Gushchin
|
00d484f354 |
mm: memcg: switch to css_tryget() in get_mem_cgroup_from_mm()
We've encountered a rcu stall in get_mem_cgroup_from_mm():
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 33-....: (21000 ticks this GP) idle=6c6/1/0x4000000000000002 softirq=35441/35441 fqs=5017
(t=21031 jiffies g=324821 q=95837) NMI backtrace for cpu 33
<...>
RIP: 0010:get_mem_cgroup_from_mm+0x2f/0x90
<...>
__memcg_kmem_charge+0x55/0x140
__alloc_pages_nodemask+0x267/0x320
pipe_write+0x1ad/0x400
new_sync_write+0x127/0x1c0
__kernel_write+0x4f/0xf0
dump_emit+0x91/0xc0
writenote+0xa0/0xc0
elf_core_dump+0x11af/0x1430
do_coredump+0xc65/0xee0
get_signal+0x132/0x7c0
do_signal+0x36/0x640
exit_to_usermode_loop+0x61/0xd0
do_syscall_64+0xd4/0x100
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The problem is caused by an exiting task which is associated with an
offline memcg. We're iterating over and over in the do {} while
(!css_tryget_online()) loop, but obviously the memcg won't become online
and the exiting task won't be migrated to a live memcg.
Let's fix it by switching from css_tryget_online() to css_tryget().
As css_tryget_online() cannot guarantee that the memcg won't go offline,
the check is usually useless, except some rare cases when for example it
determines if something should be presented to a user.
A similar problem is described by commit
|
||
|
zhong jiang
|
8207296297 |
mm: fix trying to reclaim unevictable lru page when calling madvise_pageout
Recently, I hit the following issue when running upstream.
kernel BUG at mm/vmscan.c:1521!
invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 PID: 23385 Comm: syz-executor.6 Not tainted 5.4.0-rc4+ #1
RIP: 0010:shrink_page_list+0x12b6/0x3530 mm/vmscan.c:1521
Call Trace:
reclaim_pages+0x499/0x800 mm/vmscan.c:2188
madvise_cold_or_pageout_pte_range+0x58a/0x710 mm/madvise.c:453
walk_pmd_range mm/pagewalk.c:53 [inline]
walk_pud_range mm/pagewalk.c:112 [inline]
walk_p4d_range mm/pagewalk.c:139 [inline]
walk_pgd_range mm/pagewalk.c:166 [inline]
__walk_page_range+0x45a/0xc20 mm/pagewalk.c:261
walk_page_range+0x179/0x310 mm/pagewalk.c:349
madvise_pageout_page_range mm/madvise.c:506 [inline]
madvise_pageout+0x1f0/0x330 mm/madvise.c:542
madvise_vma mm/madvise.c:931 [inline]
__do_sys_madvise+0x7d2/0x1600 mm/madvise.c:1113
do_syscall_64+0x9f/0x4c0 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
madvise_pageout() accesses the specified range of the vma and isolates
them, then runs shrink_page_list() to reclaim its memory. But it also
isolates the unevictable pages to reclaim. Hence, we can catch the
cases in shrink_page_list().
The root cause is that we scan the page tables instead of specific LRU
list. and so we need to filter out the unevictable lru pages from our
end.
Link: http://lkml.kernel.org/r/1572616245-18946-1-git-send-email-zhongjiang@huawei.com
Fixes:
|
||
|
Yang Shi
|
a85dfc305a |
mm: mempolicy: fix the wrong return value and potential pages leak of mbind
Commit |
||
|
Jason Gunthorpe
|
56f434f40f |
mm/mmu_notifier: define the header pre-processor parts even if disabled
Now that we have KERNEL_HEADER_TEST all headers are generally compile tested, so relying on makefile tricks to avoid compiling code that depends on CONFIG_MMU_NOTIFIER is more annoying. Instead follow the usual pattern and provide most of the header with only the functions stubbed out when CONFIG_MMU_NOTIFIER is disabled. This ensures code compiles no matter what the config setting is. While here, struct mmu_notifier_mm is private to mmu_notifier.c, move it. Link: https://lore.kernel.org/r/20191112202231.3856-2-jgg@ziepe.ca Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Tested-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> |
||
|
David S. Miller
|
14684b9301 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
One conflict in the BPF samples Makefile, some fixes in 'net' whilst we were converting over to Makefile.target rules in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Johannes Weiner
|
869712fd3d |
mm: memcontrol: fix network errors from failing __GFP_ATOMIC charges
While upgrading from 4.16 to 5.2, we noticed these allocation errors in
the log of the new kernel:
SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC)
cache: tw_sock_TCPv6(960:helper-logs), object size: 232, buffer size: 240, default order: 1, min order: 0
node 0: slabs: 5, objs: 170, free: 0
slab_out_of_memory+1
___slab_alloc+969
__slab_alloc+14
kmem_cache_alloc+346
inet_twsk_alloc+60
tcp_time_wait+46
tcp_fin+206
tcp_data_queue+2034
tcp_rcv_state_process+784
tcp_v6_do_rcv+405
__release_sock+118
tcp_close+385
inet_release+46
__sock_release+55
sock_close+17
__fput+170
task_work_run+127
exit_to_usermode_loop+191
do_syscall_64+212
entry_SYSCALL_64_after_hwframe+68
accompanied by an increase in machines going completely radio silent
under memory pressure.
One thing that changed since 4.16 is
|
||
|
David Hildenbrand
|
656d571193 |
mm/memory_hotplug: fix updating the node span
We recently started updating the node span based on the zone span to
avoid touching uninitialized memmaps.
Currently, we will always detect the node span to start at 0, meaning a
node can easily span too many pages. pgdat_is_empty() will still work
correctly if all zones span no pages. We should skip over all zones
without spanned pages and properly handle the first detected zone that
spans pages.
Unfortunately, in contrast to the zone span (/proc/zoneinfo), the node
span cannot easily be inspected and tested. The node span gives no real
guarantees when an architecture supports memory hotplug, meaning it can
easily contain holes or span pages of different nodes.
The node span is not really used after init on architectures that
support memory hotplug.
E.g., we use it in mm/memory_hotplug.c:try_offline_node() and in
mm/kmemleak.c:kmemleak_scan(). These users seem to be fine.
Link: http://lkml.kernel.org/r/20191027222714.5313-1-david@redhat.com
Fixes:
|
||
|
Roman Gushchin
|
221ec5c0a4 |
mm: slab: make page_cgroup_ino() to recognize non-compound slab pages properly
page_cgroup_ino() doesn't return a valid memcg pointer for non-compound
slab pages, because it depends on PgHead AND PgSlab flags to be set to
determine the memory cgroup from the kmem_cache. It's correct for
compound pages, but not for generic small pages. Those don't have PgHead
set, so it ends up returning zero.
Fix this by replacing the condition to PageSlab() && !PageTail().
Before this patch:
[root@localhost ~]# ./page-types -c /sys/fs/cgroup/user.slice/user-0.slice/user@0.service/ | grep slab
0x0000000000000080 38 0 _______S___________________________________ slab
After this patch:
[root@localhost ~]# ./page-types -c /sys/fs/cgroup/user.slice/user-0.slice/user@0.service/ | grep slab
0x0000000000000080 147 0 _______S___________________________________ slab
Also, hwpoison_filter_task() uses output of page_cgroup_ino() in order
to filter error injection events based on memcg. So if
page_cgroup_ino() fails to return memcg pointer, we just fail to inject
memory error. Considering that hwpoison filter is for testing, affected
users are limited and the impact should be marginal.
[n-horiguchi@ah.jp.nec.com: changelog additions]
Link: http://lkml.kernel.org/r/20191031012151.2722280-1-guro@fb.com
Fixes:
|
||
|
Johannes Weiner
|
1be334e5c0 |
mm/page_alloc.c: ratelimit allocation failure warnings more aggressively
While investigating a bug related to higher atomic allocation failures, we noticed the failure warnings positively drowning the console, and in our case trigger lockup warnings because of a serial console too slow to handle all that output. But even if we had a faster console, it's unclear what additional information the current level of repetition provides. Allocation failures happen for three reasons: The machine is OOM, the VM is failing to handle reasonable requests, or somebody is making unreasonable requests (and didn't acknowledge their opportunism with __GFP_NOWARN). Having the memory dump, a callstack, and the ratelimit stats on skipped failure warnings should provide enough information to let users/admins/developers know whether something is wrong and point them in the right direction for debugging, bpftracing etc. Limit allocation failure warnings to one spew every ten seconds. Link: http://lkml.kernel.org/r/20191028194906.26899-1-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Ville Syrjälä
|
ec649c9d45 |
mm/khugepaged: fix might_sleep() warn with CONFIG_HIGHPTE=y
I got some khugepaged spew on a 32bit x86:
BUG: sleeping function called from invalid context at include/linux/mmu_notifier.h:346
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 25, name: khugepaged
INFO: lockdep is turned off.
CPU: 1 PID: 25 Comm: khugepaged Not tainted 5.4.0-rc5-elk+ #206
Hardware name: System manufacturer P5Q-EM/P5Q-EM, BIOS 2203 07/08/2009
Call Trace:
dump_stack+0x66/0x8e
___might_sleep.cold.96+0x95/0xa6
__might_sleep+0x2e/0x80
collapse_huge_page.isra.51+0x5ac/0x1360
khugepaged+0x9a9/0x20f0
kthread+0xf5/0x110
ret_from_fork+0x2e/0x38
Looks like it's due to CONFIG_HIGHPTE=y pte_offset_map()->kmap_atomic()
vs. mmu_notifier_invalidate_range_start(). Let's do the naive approach
and just reorder the two operations.
Link: http://lkml.kernel.org/r/20191029201513.GG1208@intel.com
Fixes:
|
||
|
Michal Hocko
|
93b3a67448 |
mm, vmstat: reduce zone->lock holding time by /proc/pagetypeinfo
pagetypeinfo_showfree_print is called by zone->lock held in irq mode. This is not really nice because it blocks both any interrupts on that cpu and the page allocator. On large machines this might even trigger the hard lockup detector. Considering the pagetypeinfo is a debugging tool we do not really need exact numbers here. The primary reason to look at the outuput is to see how pageblocks are spread among different migratetypes and low number of pages is much more interesting therefore putting a bound on the number of pages on the free_list sounds like a reasonable tradeoff. The new output will simply tell [...] Node 6, zone Normal, type Movable >100000 >100000 >100000 >100000 41019 31560 23996 10054 3229 983 648 instead of Node 6, zone Normal, type Movable 399568 294127 221558 102119 41019 31560 23996 10054 3229 983 648 The limit has been chosen arbitrary and it is a subject of a future change should there be a need for that. While we are at it, also drop the zone lock after each free_list iteration which will help with the IRQ and page allocator responsiveness even further as the IRQ lock held time is always bound to those 100k pages. [akpm@linux-foundation.org: tweak comment text, per David Hildenbrand] Link: http://lkml.kernel.org/r/20191025072610.18526-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Waiman Long <longman@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Rafael Aquini <aquini@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jann Horn <jannh@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Mel Gorman <mgorman@suse.de> Cc: Roman Gushchin <guro@fb.com> Cc: Song Liu <songliubraving@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
abaed0112c |
mm, vmstat: hide /proc/pagetypeinfo from normal users
/proc/pagetypeinfo is a debugging tool to examine internal page
allocator state wrt to fragmentation. It is not very useful for any
other use so normal users really do not need to read this file.
Waiman Long has noticed that reading this file can have negative side
effects because zone->lock is necessary for gathering data and that a)
interferes with the page allocator and its users and b) can lead to hard
lockups on large machines which have very long free_list.
Reduce both issues by simply not exporting the file to regular users.
Link: http://lkml.kernel.org/r/20191025072610.18526-2-mhocko@kernel.org
Fixes:
|
||
|
Jason Gunthorpe
|
df2ec7641b |
mm/mmu_notifiers: use the right return code for WARN_ON
The return code from the op callback is actually in _ret, while the
WARN_ON was checking ret which causes it to misfire.
Link: http://lkml.kernel.org/r/20191025175502.GA31127@ziepe.ca
Fixes:
|