master
4738
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
2215336295 |
Merge tag 'hyperv-next-signed-20251006' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu: - Unify guest entry code for KVM and MSHV (Sean Christopherson) - Switch Hyper-V MSI domain to use msi_create_parent_irq_domain() (Nam Cao) - Add CONFIG_HYPERV_VMBUS and limit the semantics of CONFIG_HYPERV (Mukesh Rathor) - Add kexec/kdump support on Azure CVMs (Vitaly Kuznetsov) - Deprecate hyperv_fb in favor of Hyper-V DRM driver (Prasanna Kumar T S M) - Miscellaneous enhancements, fixes and cleanups (Abhishek Tiwari, Alok Tiwari, Nuno Das Neves, Wei Liu, Roman Kisel, Michael Kelley) * tag 'hyperv-next-signed-20251006' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: hyperv: Remove the spurious null directive line MAINTAINERS: Mark hyperv_fb driver Obsolete fbdev/hyperv_fb: deprecate this in favor of Hyper-V DRM driver Drivers: hv: Make CONFIG_HYPERV bool Drivers: hv: Add CONFIG_HYPERV_VMBUS option Drivers: hv: vmbus: Fix typos in vmbus_drv.c Drivers: hv: vmbus: Fix sysfs output format for ring buffer index Drivers: hv: vmbus: Clean up sscanf format specifier in target_cpu_store() x86/hyperv: Switch to msi_create_parent_irq_domain() mshv: Use common "entry virt" APIs to do work in root before running guest entry: Rename "kvm" entry code assets to "virt" to genericize APIs entry/kvm: KVM: Move KVM details related to signal/-EINTR into KVM proper mshv: Handle NEED_RESCHED_LAZY before transferring to guest x86/hyperv: Add kexec/kdump support on Azure CVMs Drivers: hv: Simplify data structures for VMBus channel close message Drivers: hv: util: Cosmetic changes for hv_utils_transport.c mshv: Add support for a new parent partition configuration clocksource: hyper-v: Skip unnecessary checks for the root partition hyperv: Add missing field to hv_output_map_device_interrupt |
||
|
|
86bcf7be1e |
Merge tag 'riscv-for-linus-6.18-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Paul Walmsley:
- Support for the RISC-V-standardized RPMI interface.
RPMI is a platform management communication mechanism between OSes
running on application processors, and a remote platform management
processor. Similar to ARM SCMI, TI SCI, etc. This includes irqchip,
mailbox, and clk changes.
- Support for the RISC-V-standardized MPXY SBI extension.
MPXY is a RISC-V-specific standard implementing a shared memory
mailbox between S-mode operating systems (e.g., Linux) and M-mode
firmware (e.g., OpenSBI). It is part of this PR since one of its use
cases is to enable M-mode firmware to act as a single RPMI client for
all RPMI activity on a core (including S-mode RPMI activity).
Includes a mailbox driver.
- Some ACPI-related updates to enable the use of RPMI and MPXY.
- The addition of Linux-wide memcpy_{from,to}_le32() static inline
functions, for RPMI use.
- An ACPI Kconfig change to enable boot logos on any ACPI-using
architecture (including RISC-V)
- A RISC-V defconfig change to add GPIO keyboard and event device
support, for front panel shutdown or reboot buttons
* tag 'riscv-for-linus-6.18-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (26 commits)
clk: COMMON_CLK_RPMI should depend on RISCV
ACPI: support BGRT table on RISC-V
MAINTAINERS: Add entry for RISC-V RPMI and MPXY drivers
RISC-V: Enable GPIO keyboard and event device in RV64 defconfig
irqchip/riscv-rpmi-sysmsi: Add ACPI support
mailbox/riscv-sbi-mpxy: Add ACPI support
irqchip/irq-riscv-imsic-early: Export imsic_acpi_get_fwnode()
ACPI: RISC-V: Add RPMI System MSI to GSI mapping
ACPI: RISC-V: Add support to update gsi range
ACPI: RISC-V: Create interrupt controller list in sorted order
ACPI: scan: Update honor list for RPMI System MSI
ACPI: Add support for nargs_prop in acpi_fwnode_get_reference_args()
ACPI: property: Refactor acpi_fwnode_get_reference_args() to support nargs_prop
irqchip: Add driver for the RPMI system MSI service group
dt-bindings: Add RPMI system MSI interrupt controller bindings
dt-bindings: Add RPMI system MSI message proxy bindings
clk: Add clock driver for the RISC-V RPMI clock service group
dt-bindings: clock: Add RPMI clock service controller bindings
dt-bindings: clock: Add RPMI clock service message proxy bindings
mailbox: Add RISC-V SBI message proxy (MPXY) based mailbox driver
...
|
||
|
|
f3826aa996 |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"This excludes the bulk of the x86 changes, which I will send
separately. They have two not complex but relatively unusual conflicts
so I will wait for other dust to settle.
guest_memfd:
- Add support for host userspace mapping of guest_memfd-backed memory
for VM types that do NOT use support KVM_MEMORY_ATTRIBUTE_PRIVATE
(which isn't precisely the same thing as CoCo VMs, since x86's
SEV-MEM and SEV-ES have no way to detect private vs. shared).
This lays the groundwork for removal of guest memory from the
kernel direct map, as well as for limited mmap() for
guest_memfd-backed memory.
For more information see:
- commit
|
||
|
|
bed0653fe2 |
Merge tag 'iommu-updates-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
- Inte VT-d:
- IOMMU driver updated to the latest VT-d specification
- Don't enable PRS if PDS isn't supported
- Replace snprintf with scnprintf
- Fix legacy mode page table dump through debugfs
- Miscellaneous cleanups
- AMD-Vi:
- Support kdump boot when SNP is enabled
- Apple-DART:
- 4-level page-table support
- RISC-V IOMMU:
- ACPI support
- Small number of miscellaneous cleanups and fixes
* tag 'iommu-updates-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (22 commits)
iommu/vt-d: Disallow dirty tracking if incoherent page walk
iommu/vt-d: debugfs: Avoid dumping context command register
iommu/vt-d: Removal of Advanced Fault Logging
iommu/vt-d: PRS isn't usable if PDS isn't supported
iommu/vt-d: Remove LPIG from page group response descriptor
iommu/vt-d: Drop unused cap_super_offset()
iommu/vt-d: debugfs: Fix legacy mode page table dump logic
iommu/vt-d: Replace snprintf with scnprintf in dmar_latency_snapshot()
iommu/io-pgtable-dart: Fix off by one error in table index check
iommu/riscv: Add ACPI support
ACPI: scan: Add support for RISC-V in acpi_iommu_configure_id()
ACPI: RISC-V: Add support for RIMT
iommu/omap: Use int type to store negative error codes
iommu/apple-dart: Clear stream error indicator bits for T8110 DARTs
iommu/amd: Skip enabling command/event buffers for kdump
crypto: ccp: Skip SEV and SNP INIT for kdump boot
iommu/amd: Reuse device table for kdump
iommu/amd: Add support to remap/unmap IOMMU buffers for kdump
iommu/apple-dart: Add 4-level page table support
iommu/io-pgtable-dart: Add 4-level page table support
...
|
||
|
|
8804d970fa |
Merge tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm, swap: improve cluster scan strategy" from Kairui Song improves
performance and reduces the failure rate of swap cluster allocation
- "support large align and nid in Rust allocators" from Vitaly Wool
permits Rust allocators to set NUMA node and large alignment when
perforning slub and vmalloc reallocs
- "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
DAMOS_STAT's handling of the DAMON operations sets for virtual
address spaces for ops-level DAMOS filters
- "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps
- "mm/mincore: minor clean up for swap cache checking" from Kairui Song
performs some cleanup in the swap code
- "mm: vm_normal_page*() improvements" from David Hildenbrand provides
code cleanup in the pagemap code
- "add persistent huge zero folio support" from Pankaj Raghav provides
a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero
- "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
the recently added Kexec Handover feature
- "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
Stoakes turns mm_struct.flags into a bitmap. To end the constant
struggle with space shortage on 32-bit conflicting with 64-bit's
needs
- "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
code
- "selftests/mm: Fix false positives and skip unsupported tests" from
Donet Tom fixes a few things in our selftests code
- "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
from David Hildenbrand "allows individual processes to opt-out of
THP=always into THP=madvise, without affecting other workloads on the
system".
It's a long story - the [1/N] changelog spells out the considerations
- "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc
- "Tiny optimization for large read operations" from Chi Zhiling
improves the efficiency of the pagecache read path
- "Better split_huge_page_test result check" from Zi Yan improves our
folio splitting selftest code
- "test that rmap behaves as expected" from Wei Yang adds some rmap
selftests
- "remove write_cache_pages()" from Christoph Hellwig removes that
function and converts its two remaining callers
- "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
selftests issues
- "introduce kernel file mapped folios" from Boris Burkov introduces
the concept of "kernel file pages". Using these permits btrfs to
account its metadata pages to the root cgroup, rather than to the
cgroups of random inappropriate tasks
- "mm/pageblock: improve readability of some pageblock handling" from
Wei Yang provides some readability improvements to the page allocator
code
- "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
to understand arm32 highmem
- "tools: testing: Use existing atomic.h for vma/maple tests" from
Brendan Jackman performs some code cleanups and deduplication under
tools/testing/
- "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
a couple of 32-bit issues in tools/testing/radix-tree.c
- "kasan: unify kasan_enabled() and remove arch-specific
implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
initialization code into a common arch-neutral implementation
- "mm: remove zpool" from Johannes Weiner removes zspool - an
indirection layer which now only redirects to a single thing
(zsmalloc)
- "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
couple of cleanups in the fork code
- "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
adjustments at various nth_page() callsites, eventually permitting
the removal of that undesirable helper function
- "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
creates a KASAN read-only mode for ARM, using that architecture's
memory tagging feature. It is felt that a read-only mode KASAN is
suitable for use in production systems rather than debug-only
- "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
some tidying in the hugetlb folio allocation code
- "mm: establish const-correctness for pointer parameters" from Max
Kellermann makes quite a number of the MM API functions more accurate
about the constness of their arguments. This was getting in the way
of subsystems (in this case CEPH) when they attempt to improving
their own const/non-const accuracy
- "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
code sites which were confused over when to use free_pages() vs
__free_pages()
- "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
mapletree code accessible to Rust. Required by nouveau and by its
forthcoming successor: the new Rust Nova driver
- "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements" from David Hildenbrand adds a fix and some cleanups to
the thp selftesting code
- "mm, swap: introduce swap table as swap cache (phase I)" from Chris
Li and Kairui Song is the first step along the path to implementing
"swap tables" - a new approach to swap allocation and state tracking
which is expected to yield speed and space improvements. This
patchset itself yields a 5-20% performance benefit in some situations
- "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
layer to clean up the ptdesc code a little
- "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
issues in our 5-level pagetable selftesting code
- "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
addresses a couple of minor issues in relatively new memory
allocation profiling feature
- "Small cleanups" from Matthew Wilcox has a few cleanups in
preparation for more memdesc work
- "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
Quanmin Yan makes some changes to DAMON in furtherance of supporting
arm highmem
- "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
Anjum adds that compiler check to selftests code and fixes the
fallout, by removing dead code
- "Improvements to Victim Process Thawing and OOM Reaper Traversal
Order" from zhongjinji makes a number of improvements in the OOM
killer: mainly thawing a more appropriate group of victim threads so
they can release resources
- "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
is a bunch of small and unrelated fixups for DAMON
- "mm/damon: define and use DAMON initialization check function" from
SeongJae Park implement reliability and maintainability improvements
to a recently-added bug fix
- "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
SeongJae Park provides additional transparency to userspace clients
of the DAMON_STAT information
- "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
some constraints on khubepaged's collapsing of anon VMAs. It also
increases the success rate of MADV_COLLAPSE against an anon vma
- "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
from Lorenzo Stoakes moves us further towards removal of
file_operations.mmap(). This patchset concentrates upon clearing up
the treatment of stacked filesystems
- "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
provides some fixes and improvements to mlock's tracking of large
folios. /proc/meminfo's "Mlocked" field became more accurate
- "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
Donet Tom fixes several user-visible KSM stats inaccuracies across
forks and adds selftest code to verify these counters
- "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
some potential but presently benign issues in KSM's mm_slot handling
* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
mm: swap: check for stable address space before operating on the VMA
mm: convert folio_page() back to a macro
mm/khugepaged: use start_addr/addr for improved readability
hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
alloc_tag: fix boot failure due to NULL pointer dereference
mm: silence data-race in update_hiwater_rss
mm/memory-failure: don't select MEMORY_ISOLATION
mm/khugepaged: remove definition of struct khugepaged_mm_slot
mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
hugetlb: increase number of reserving hugepages via cmdline
selftests/mm: add fork inheritance test for ksm_merging_pages counter
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
drivers/base/node: fix double free in register_one_node()
mm: remove PMD alignment constraint in execmem_vmalloc()
mm/memory_hotplug: fix typo 'esecially' -> 'especially'
mm/rmap: improve mlock tracking for large folios
mm/filemap: map entire large folio faultaround
mm/fault: try to map the entire file folio in finish_fault()
mm/rmap: mlock large folios in try_to_unmap_one()
mm/rmap: fix a mlock race condition in folio_referenced_one()
...
|
||
|
|
07fdad3a93 |
Merge tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- Improve drop account scalability on NUMA hosts for RAW and UDP
sockets and the backlog, almost doubling the Pps capacity under DoS
- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance
by an additional 50%, even more under extreme conditions
- Add support for PSP encryption of TCP connections; this mechanism
has some similarities with IPsec and TLS, but offers superior HW
offloads capabilities
- Ongoing work to support Accurate ECN for TCP. AccECN allows more
than one congestion notification signal per RTT and is a building
block for Low Latency, Low Loss, and Scalable Throughput (L4S)
- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath
- Refactor skb deferral free to better scale on large multi-NUMA
hosts, this improves TCP and UDP RX performances significantly on
such HW
- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds
- Improve handling of setups with a large number of nexthop, making
dump operating scaling linearly and avoiding unneeded
synchronize_rcu() on delete
- Improve bridge handling of VLAN FDB, storing a single entry per
bridge instead of one entry per port; this makes the dump order of
magnitude faster on large switches
- Restore IP ID correctly for encapsulated packets at GSO
segmentation time, allowing GRO to merge packets in more scenarios
- Improve netfilter matching performance on large sets
- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting
recent TCP autotuning changes
- Allow bridges to redirect to a backup port when the bridge port is
administratively down
- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups
- Add RCU safety to dst->dev, closing a lot of possible races
- A significant crypto library API for SCTP, MPTCP and IPv6 SR,
reducing code duplication
- Supports pulling data from an skb frag into the linear area of an
XDP buffer
Things we sprinkled into general kernel code:
- Generate netlink documentation from YAML using an integrated YAML
parser
Driver API:
- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection
- Introduce API for fetching the DMA device for a given queue,
allowing TCP zerocopy RX on more H/W setups
- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath
- Add a new dedicated ethtool callback enabling drivers to provide
the number of RX rings directly, improving efficiency and clarity
in RX ring queries and RSS configuration
- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause
- Support for DPLL phase offset exponential moving average,
controlling the average smoothing factor
Device drivers:
- Add a new Huawei driver for 3rd gen NIC (hinic3)
- Add a new SpacemiT driver for K1 ethernet MAC
- Add a generic abstraction for shared memory communication
devices (dibps)
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention
issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link
aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts
- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level
checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages
to improve memory efficiency
- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4):
- support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups
- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115
- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory
usage
- rcar_canfd: update the CAN-FD handling
- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support
- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k):
- GTK rekey fixes
- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs"
* tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits)
net: stmmac: Add support for Allwinner A523 GMAC200
dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
Revert "Documentation: net: add flow control guide and document ethtool API"
octeontx2-pf: fix bitmap leak
octeontx2-vf: fix bitmap leak
net/mlx5e: Use extack in set rxfh callback
net/mlx5e: Introduce mlx5e_rss_params for RSS configuration
net/mlx5e: Introduce mlx5e_rss_init_params
net/mlx5e: Remove unused mdev param from RSS indir init
net/mlx5: Improve QoS error messages with actual depth values
net/mlx5e: Prevent entering switchdev mode with inconsistent netns
net/mlx5: HWS, Generalize complex matchers
net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
selftests/net: add tcp_port_share to .gitignore
Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"
net: add NUMA awareness to skb_attempt_defer_free()
net: use llist for sd->defer_list
net: make softnet_data.defer_count an atomic
selftests: drv-net: psp: add tests for destroying devices
selftests: drv-net: psp: add test for auto-adjusting TCP MSS
...
|
||
|
|
7f70725741 |
Merge tag 'kbuild-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild updates from Nathan Chancellor: - Extend modules.builtin.modinfo to include module aliases from MODULE_DEVICE_TABLE for builtin modules so that userspace tools (such as kmod) can verify that a particular module alias will be handled by a builtin module - Bump the minimum version of LLVM for building the kernel to 15.0.0 - Upgrade several userspace API checks in headers_check.pl to errors - Unify and consolidate CONFIG_WERROR / W=e handling - Turn assembler and linker warnings into errors with CONFIG_WERROR / W=e - Respect CONFIG_WERROR / W=e when building userspace programs (userprogs) - Enable -Werror unconditionally when building host programs (hostprogs) - Support copy_file_range() and data segment alignment in gen_init_cpio to improve performance on filesystems that support reflinks such as btrfs and XFS - Miscellaneous small changes to scripts and configuration files * tag 'kbuild-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (47 commits) modpost: Initialize builtin_modname to stop SIGSEGVs Documentation: kbuild: note CONFIG_DEBUG_EFI in reproducible builds kbuild: vmlinux.unstripped should always depend on .vmlinux.export.o modpost: Create modalias for builtin modules modpost: Add modname to mod_device_table alias scsi: Always define blogic_pci_tbl structure kbuild: extract modules.builtin.modinfo from vmlinux.unstripped kbuild: keep .modinfo section in vmlinux.unstripped kbuild: always create intermediate vmlinux.unstripped s390: vmlinux.lds.S: Reorder sections KMSAN: Remove tautological checks objtool: Drop noinstr hack for KCSAN_WEAK_MEMORY lib/Kconfig.debug: Drop CLANG_VERSION check from DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT riscv: Remove ld.lld version checks from many TOOLCHAIN_HAS configs riscv: Unconditionally use linker relaxation riscv: Remove version check for LTO_CLANG selects powerpc: Drop unnecessary initializations in __copy_inst_from_kernel_nofault() mips: Unconditionally select ARCH_HAS_CURRENT_STACK_POINTER arm64: Remove tautological LLVM Kconfig conditions ARM: Clean up definition of ARM_HAS_GROUP_RELOCS ... |
||
|
|
f8912147db |
Merge tag 'soc-defconfig-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann: "Only a small set up updates, enabling a few drivers for Artpec, THead, Renesas and Broadcom chips, and cleaning out some Qualcomm options that were removed previously" * tag 'soc-defconfig-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: configs: u8500: Set NFC_SHDLC as built-in riscv: defconfig: Enable MMP_PDMA support for SpacemiT K1 SoC riscv: defconfig: run savedefconfig to reorder it ARM: defconfig: Remove obsolete CONFIG_USB_EHCI_MSM arm64: defconfig: Enable Marvell WiFi-Ex USB driver arm64: defconfig: Enable BCM2712 on-chip pin controller driver arm64: defconfig: Enable Axis ARTPEC SoC ARM: s3c6400_defconfig: Drop MTD_NAND_S3C2410 ARM: defconfig: pxa: Remove duplicate CONFIG_USB_GPIO_VBUS entry ARM: defconfig: cleanup orphaned CONFIGs arm64: defconfig: enable i.MX91 pinctrl arm64: defconfig: Enable X1P42100 GPUCC driver arm64: defconfig: Enable QCS615 clock controllers arm64: defconfig: Enable the RZ/V2H(P) RSPI driver arm64: defconfig: Enable Renesas RZ/T2H serial SCI |
||
|
|
0f048c878e |
Merge tag 'soc-dt-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC dt updates from Arnd Bergmann:
"There are five sets of new SoCs that get added in existing families,
all of them being either upgrades or cut-down versions of the older
chips:
- Apple M2 Pro, M2 Max and M2 Ultra, used in the 2022/2023 generation
of high-end workstations and laptops from Apple. Linux has been
working on these for a while but stil requires patches.
- Axis Artpec8 is an Armv8 chip based on Samsung Exynos design,
unlike the earlier Armv7 Artpec6 from the same company that was
part of a separate family of chips.
- NXP i.MX91 is a cut-down version of i.MX93, using only a single
Cortex-A55 core.
- Qualcomm Lemans Auto is a variant of the Lemans SoC that was
originally merged under the sa8775p name, the differences being
mostly the firmware configuration of the platform.
- Four new Renesas SoCs RZ/T2H (r9a09g077m44), RZ/N2H (r9a09g087m44),
RZ/T2H (r9a09g077), and RZ/N2H (r9a09g087) are all industrial
bedded SoCs based on Cortex-A55 cores
In total, there are 65 new machines, including:
- Industrial embedded system and single-board computers based on NXP,
Allwinner, TI, Rockchips, Marvell, Xilinx Spacemit, Starfive chips.
- Reference boards for the newly added Renesas, Qualcomm, NXP and
Axis ARMv8 chips as well as Microchip's MPFS RISC-V SoC
- Laptops and Workstations using Apple M2 and Qualcomm Snapdragon X1
chips.
- Several Samsung phones using Qualcomm Snapdragon chips
- Set-top boxes based on Allwinner H313
- Five BMC boards using 32-bit ASpeed SoCs
- Three network routers using IXP4xx (ARMv5!) and Broadcom bcm4708
(ARMv7) SoCs
Two machines get phased out because they were available only in small
quantities but never made it into products: one STi407 based reference
board, and a Snapdragon 845 based Chromebook.
Aside from the newly added machines, a lot of work went into improving
hardware support on the existing machines and cleaning up contents for
validation"
* tag 'soc-dt-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (931 commits)
arm64: dts: apm-shadowcat: Drop "apm,xgene2-pcie" compatible
arm64: dts: apm-shadowcat: Move slimpro nodes out of "simple-bus" node
ARM: dts: microchip: sam9x7: Add qspi controller
arm64: dts: qcom: Add MST pixel streams for displayport
arm64: dts: qcom: sm6350: correct DP compatibility strings
arm64: dts: qcom: monaco-evk: Enable Adreno 623 GPU
arm64: dts: qcom: qcs8300-ride: Enable Adreno 623 GPU
arm64: dts: qcom: qcs8300: Add gpu and gmu nodes
arm64: dts: allwinner: h313: Add Amediatech X96Q
dt-bindings: arm: sunxi: Add Amediatech X96Q
arm64: dts: apple: t8015: Add SPMI node
arm64: dts: apple: t8012: Add SPMI node
arm64: dts: apple: Add J180d (Mac Pro, M2 Ultra, 2023) device tree
arm64: dts: rockchip: Add devicetree for the ROC-RK3588-RT
dt-bindings: arm: rockchip: Add Firefly ROC-RK3588-RT
arm64: dts: rockchip: update pinctrl names for Radxa E52C
arm64: dts: rockchip: remove vcc_3v3_pmu regulator for Radxa E52C
arm64: dts: apple: Add J474s, J475c and J475d device trees
arm64: dts: apple: Add J414 and J416 Macbook Pro device trees
arm64: dts: apple: Add initial t6020/t6021/t6022 DTs
...
|
||
|
|
a8253f8077 |
Merge tag 'soc-newsoc-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull new SoC support from Arnd Bergmann: "Pinkesh Vaghela adds support for the ESWIN EIC7700 SoC consisting of SiFive Quad-Core P550 CPU cluster and the first development board that uses it, the SiFive HiFive Premier P550 [1]. This adds initial device tree and also adds ESWIN architecture support. Boot-tested using intiramfs with Linux v6.17-rc3 on HiFive Premier P550 board using U-Boot 2024.01 and OpenSBI 1.4" Link: https://lore.kernel.org/linux-riscv/20250825132427.1618089-1-pinkesh.vaghela@einfochips.com/ [1] * tag 'soc-newsoc-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: riscv: dts: eswin: add HiFive Premier P550 board device tree riscv: dts: add initial support for EIC7700 SoC dt-bindings: interrupt-controller: Add ESWIN EIC7700 PLIC dt-bindings: riscv: Add SiFive HiFive Premier P550 board riscv: Add Kconfig option for ESWIN platforms dt-bindings: riscv: Add SiFive P550 CPU compatible |
||
|
|
ae28ed4578 |
Merge tag 'bpf-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov: - Support pulling non-linear xdp data with bpf_xdp_pull_data() kfunc (Amery Hung) Applied as a stable branch in bpf-next and net-next trees. - Support reading skb metadata via bpf_dynptr (Jakub Sitnicki) Also a stable branch in bpf-next and net-next trees. - Enforce expected_attach_type for tailcall compatibility (Daniel Borkmann) - Replace path-sensitive with path-insensitive live stack analysis in the verifier (Eduard Zingerman) This is a significant change in the verification logic. More details, motivation, long term plans are in the cover letter/merge commit. - Support signed BPF programs (KP Singh) This is another major feature that took years to materialize. Algorithm details are in the cover letter/marge commit - Add support for may_goto instruction to s390 JIT (Ilya Leoshkevich) - Add support for may_goto instruction to arm64 JIT (Puranjay Mohan) - Fix USDT SIB argument handling in libbpf (Jiawei Zhao) - Allow uprobe-bpf program to change context registers (Jiri Olsa) - Support signed loads from BPF arena (Kumar Kartikeya Dwivedi and Puranjay Mohan) - Allow access to union arguments in tracing programs (Leon Hwang) - Optimize rcu_read_lock() + migrate_disable() combination where it's used in BPF subsystem (Menglong Dong) - Introduce bpf_task_work_schedule*() kfuncs to schedule deferred execution of BPF callback in the context of a specific task using the kernel’s task_work infrastructure (Mykyta Yatsenko) - Enforce RCU protection for KF_RCU_PROTECTED kfuncs (Kumar Kartikeya Dwivedi) - Add stress test for rqspinlock in NMI (Kumar Kartikeya Dwivedi) - Improve the precision of tnum multiplier verifier operation (Nandakumar Edamana) - Use tnums to improve is_branch_taken() logic (Paul Chaignon) - Add support for atomic operations in arena in riscv JIT (Pu Lehui) - Report arena faults to BPF error stream (Puranjay Mohan) - Search for tracefs at /sys/kernel/tracing first in bpftool (Quentin Monnet) - Add bpf_strcasecmp() kfunc (Rong Tao) - Support lookup_and_delete_elem command in BPF_MAP_STACK_TRACE (Tao Chen) * tag 'bpf-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (197 commits) libbpf: Replace AF_ALG with open coded SHA-256 selftests/bpf: Add stress test for rqspinlock in NMI selftests/bpf: Add test case for different expected_attach_type bpf: Enforce expected_attach_type for tailcall compatibility bpftool: Remove duplicate string.h header bpf: Remove duplicate crypto/sha2.h header libbpf: Fix error when st-prefix_ops and ops from differ btf selftests/bpf: Test changing packet data from kfunc selftests/bpf: Add stacktrace map lookup_and_delete_elem test case selftests/bpf: Refactor stacktrace_map case with skeleton bpf: Add lookup_and_delete_elem for BPF_MAP_STACK_TRACE selftests/bpf: Fix flaky bpf_cookie selftest selftests/bpf: Test changing packet data from global functions with a kfunc bpf: Emit struct bpf_xdp_sock type in vmlinux BTF selftests/bpf: Task_work selftest cleanup fixes MAINTAINERS: Delete inactive maintainers from AF_XDP bpf: Mark kfuncs as __noclone selftests/bpf: Add kprobe multi write ctx attach test selftests/bpf: Add kprobe write ctx attach test selftests/bpf: Add uprobe context ip register change test ... |
||
|
|
4b81e2eb9e |
Merge tag 'timers-vdso-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO updates from Thomas Gleixner: - Further consolidation of the VDSO infrastructure and the common data store - Simplification of the related Kconfig logic - Improve the VDSO selftest suite * tag 'timers-vdso-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: selftests: vDSO: Drop vdso_test_clock_getres selftests: vDSO: vdso_test_abi: Add tests for clock_gettime64() selftests: vDSO: vdso_test_abi: Test CPUTIME clocks selftests: vDSO: vdso_test_abi: Use explicit indices for name array selftests: vDSO: vdso_test_abi: Drop clock availability tests selftests: vDSO: vdso_test_abi: Use ksft_finished() selftests: vDSO: vdso_test_abi: Correctly skip whole test with missing vDSO selftests: vDSO: Fix -Wunitialized in powerpc VDSO_CALL() wrapper vdso: Add struct __kernel_old_timeval forward declaration to gettime.h vdso: Gate VDSO_GETRANDOM behind HAVE_GENERIC_VDSO vdso: Drop Kconfig GENERIC_VDSO_TIME_NS vdso: Drop Kconfig GENERIC_VDSO_DATA_STORE vdso: Drop kconfig GENERIC_COMPAT_VDSO vdso: Drop kconfig GENERIC_VDSO_32 riscv: vdso: Untangle Kconfig logic time: Build generic update_vsyscall() only with generic time vDSO vdso/gettimeofday: Remove !CONFIG_TIME_NS stubs vdso: Move ENABLE_COMPAT_VDSO from core to arm64 ARM: VDSO: Remove cntvct_ok global variable vdso/datastore: Gate time data behind CONFIG_GENERIC_GETTIMEOFDAY |
||
|
|
03a53e09cd |
Merge tag 'irq-drivers-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq chip driver updates from Thomas Gleixner: - Use the startup/shutdown callbacks for the PCI/MSI per device interrupt domains. This allows us to initialize the RISCV PLIC interrupt hierarchy correctly and provides a mechanism to decouple the masking and unmasking during run-time from the expensive PCI mask and unmask when the underlying MSI provider implementation allows the interrupt to be masked. - Initialize the RISCV PLIC MSI interrupt hierarchy correctly so that the affinity assignment works correctly by switching it over to the startup/shutdown scheme - Allow MSI providers to opt out from masking a PCI/MSI interrupt at the PCI device during operation when the provider can mask the interrupt at the underlying interrupt chip. This reduces the overhead in scenarios where disable_irq()/enable_irq() is utilized frequently by a driver. The PCI/MSI device level [un]masking is only required on startup and shutdown in this case. - Remove the conditional mask/unmask logic in the PCI/MSI layer as this is now handled unconditionally. - Replace the hardcoded interrupt routing in the Loongson EIOINTC interrupt driver to respect the firmware settings and spread them out to different CPU interrupt inputs so that the demultiplexing handler only needs to read only a single 64-bit status register instead of four, which significantly reduces the overhead in VMs as the status register access causes a VM exit. - Add support for the new AST2700 SCU interrupt controllers - Use the legacy interrupt domain setup for the Loongson PCH-LPC interrupt controller, which resembles the x86 legacy PIC setup and has the same hardcoded legacy requirements. - The usual set of cleanups, fixes and improvements all over the place * tag 'irq-drivers-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) irqchip/loongson-pch-lpc: Use legacy domain for PCH-LPC IRQ controller PCI/MSI: Remove the conditional parent [un]mask logic irqchip/msi-lib: Honor the MSI_FLAG_PCI_MSI_MASK_PARENT flag irqchip/aspeed-scu-ic: Add support for AST2700 SCU interrupt controllers dt-bindings: interrupt-controller: aspeed: Add AST2700 SCU IC compatibles dt-bindings: mfd: aspeed: Add AST2700 SCU compatibles irqchip/aspeed-scu-ic: Refactor driver to support variant-based initialization irqchip/gic-v5: Fix error handling in gicv5_its_irq_domain_alloc() irqchip/gic-v5: Fix loop in gicv5_its_create_itt_two_level() cleanup path irqchip/gic-v5: Delete a stray tab irqchip/sg2042-msi: Set irq type according to DT configuration riscv: sophgo: dts: sg2044: Change msi irq type to IRQ_TYPE_EDGE_RISING riscv: sophgo: dts: sg2042: Change msi irq type to IRQ_TYPE_EDGE_RISING irqchip/gic-v2m: Handle Multiple MSI base IRQ Alignment irqchip/renesas-rzg2l: Remove dev_err_probe() if error is -ENOMEM irqchip: Use int type to store negative error codes irqchip/gic-v5: Remove the redundant ITS cache invalidation PCI/MSI: Check MSI_FLAG_PCI_MSI_MASK_PARENT in cond_[startup|shutdown]_parent() irqchip/loongson-eiointc: Add multiple interrupt pin routing support irqchip/loongson-eiointc: Route interrupt parsed from bios table ... |
||
|
|
9be7e1e320 |
entry: Rename "kvm" entry code assets to "virt" to genericize APIs
Rename the "kvm" entry code files and Kconfigs to use generic "virt" nomenclature so that the code can be reused by other hypervisors (or rather, their root/dom0 partition drivers), without incorrectly suggesting the code somehow relies on and/or involves KVM. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
|
|
6d0386ea99 |
entry/kvm: KVM: Move KVM details related to signal/-EINTR into KVM proper
Move KVM's morphing of pending signals into userspace exits into KVM proper, and drop the @vcpu param from xfer_to_guest_mode_handle_work(). How KVM responds to -EINTR is a detail that really belongs in KVM itself, and invoking kvm_handle_signal_exit() from kernel code creates an inverted module dependency. E.g. attempting to move kvm_handle_signal_exit() into kvm_main.c would generate an linker error when building kvm.ko as a module. Dropping KVM details will also converting the KVM "entry" code into a more generic virtualization framework so that it can be used when running as a Hyper-V root partition. Lastly, eliminating usage of "struct kvm_vcpu" outside of KVM is also nice to have for KVM x86 developers, as keeping the details of kvm_vcpu purely within KVM allows changing the layout of the structure without having to boot into a new kernel, e.g. allows rebuilding and reloading kvm.ko with a modified kvm_vcpu structure as part of debug/development. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
|
|
7601d18be0 |
Merge tag 'core-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull TIF bit unification updates from Thomas Gleixner: "A set of changes to consolidate the generic TIF (thread info flag) bits accross architectures. All architectures define the same set of generic TIF bits. This makes it pointlessly hard to add a new generic TIF bit or to change an existing one. Provide a generic variant and convert the architectures which utilize the generic entry code over to use it. The TIF space is divided into 16 generic bits and 16 architecture specific bits, which turned out to provide enough space on both sides" * tag 'core-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: LoongArch: Fix bitflag conflict for TIF_FIXADE riscv: Use generic TIF bits loongarch: Use generic TIF bits s390/entry: Remove unused TIF flags s390: Use generic TIF bits x86: Use generic TIF bits asm-generic: Provide generic TIF infrastructure |
||
|
|
6c7340a7a8 |
Merge tag 'sched-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core scheduler changes:
- Make migrate_{en,dis}able() inline, to improve performance
(Menglong Dong)
- Move STDL_INIT() functions out-of-line (Peter Zijlstra)
- Unify the SCHED_{SMT,CLUSTER,MC} Kconfig (Peter Zijlstra)
Fair scheduling:
- Defer throttling to when tasks exit to user-space, to reduce the
chance & impact of throttle-preemption with held locks and other
resources (Aaron Lu, Valentin Schneider)
- Get rid of sched_domains_curr_level hack for tl->cpumask(), as the
warning was getting triggered on certain topologies (Peter
Zijlstra)
Misc cleanups & fixes:
- Header cleanups (Menglong Dong)
- Fix race in push_dl_task() (Harshit Agarwal)"
* tag 'sched-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix some typos in include/linux/preempt.h
sched: Make migrate_{en,dis}able() inline
rcu: Replace preempt.h with sched.h in include/linux/rcupdate.h
arch: Add the macro COMPILE_OFFSETS to all the asm-offsets.c
sched/fair: Do not balance task to a throttled cfs_rq
sched/fair: Do not special case tasks in throttled hierarchy
sched/fair: update_cfs_group() for throttled cfs_rqs
sched/fair: Propagate load for throttled cfs_rq
sched/fair: Get rid of throttled_lb_pair()
sched/fair: Task based throttle time accounting
sched/fair: Switch to task based throttle model
sched/fair: Implement throttle task work and related helpers
sched/fair: Add related data structure for task based throttle
sched: Unify the SCHED_{SMT,CLUSTER,MC} Kconfig
sched: Move STDL_INIT() functions out-of-line
sched/fair: Get rid of sched_domains_curr_level hack for tl->cpumask()
sched/deadline: Fix race in push_dl_task()
|
||
|
|
cb7e3669c6 |
Merge tag 'riscv-for-linus-6.18-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley - Replacement of __ASSEMBLY__ with __ASSEMBLER__ in header files (other architectures have already merged this type of cleanup) - The introduction of ioremap_wc() for RISC-V - Cleanup of the RISC-V kprobes code to use mostly-extant macros rather than open code - A RISC-V kprobes unit test - An architecture-specific endianness swap macro set implementation, leveraging some dedicated RISC-V instructions for this purpose if they are available - The ability to identity and communicate to userspace the presence of a MIPS P8700-specific ISA extension, and to leverage its MIPS-specific PAUSE implementation in cpu_relax() - Several other miscellaneous cleanups * tag 'riscv-for-linus-6.18-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (39 commits) riscv: errata: Fix the PAUSE Opcode for MIPS P8700 riscv: hwprobe: Document MIPS xmipsexectl vendor extension riscv: hwprobe: Add MIPS vendor extension probing riscv: Add xmipsexectl instructions riscv: Add xmipsexectl as a vendor extension dt-bindings: riscv: Add xmipsexectl ISA extension description riscv: cpufeature: add validation for zfa, zfh and zfhmin perf: riscv: skip empty batches in counter start selftests: riscv: Add README for RISC-V KSelfTest riscv: sbi: Switch to new sys-off handler API riscv: Move vendor errata definitions to new header RISC-V: ACPI: enable parsing the BGRT table riscv: Enable ARCH_HAVE_NMI_SAFE_CMPXCHG riscv: pi: use 'targets' instead of extra-y in Makefile riscv: introduce asm/swab.h riscv: mmap(): use unsigned offset type in riscv_sys_mmap drivers/perf: riscv: Remove redundant ternary operators riscv: mm: Use mmu-type from FDT to limit SATP mode riscv: mm: Return intended SATP mode for noXlvl options riscv: kprobes: Remove duplication of RV_EXTRACT_ITYPE_IMM ... |
||
|
|
a5ba183bde |
Merge tag 'hardening-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"One notable addition is the creation of the 'transitional' keyword for
kconfig so CONFIG renaming can go more smoothly.
This has been a long-standing deficiency, and with the renaming of
CONFIG_CFI_CLANG to CONFIG_CFI (since GCC will soon have KCFI
support), this came up again.
The breadth of the diffstat is mainly this renaming.
- Clean up usage of TRAILING_OVERLAP() (Gustavo A. R. Silva)
- lkdtm: fortify: Fix potential NULL dereference on kmalloc failure
(Junjie Cao)
- Add str_assert_deassert() helper (Lad Prabhakar)
- gcc-plugins: Remove TODO_verify_il for GCC >= 16
- kconfig: Fix BrokenPipeError warnings in selftests
- kconfig: Add transitional symbol attribute for migration support
- kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI"
* tag 'hardening-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib/string_choices: Add str_assert_deassert() helper
kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI
kconfig: Add transitional symbol attribute for migration support
kconfig: Fix BrokenPipeError warnings in selftests
gcc-plugins: Remove TODO_verify_il for GCC >= 16
stddef: Introduce __TRAILING_OVERLAP()
stddef: Remove token-pasting in TRAILING_OVERLAP()
lkdtm: fortify: Fix potential NULL dereference on kmalloc failure
|
||
|
|
50157eaa0c |
Merge tag 'execve-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook: - binfmt_elf: preserve original ELF e_flags for core dumps (Svetlana Parfenova) - exec: Fix incorrect type for ret (Xichao Zhao) - binfmt_elf: Replace offsetof() with struct_size() in fill_note_info() (Xichao Zhao) * tag 'execve-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: binfmt_elf: preserve original ELF e_flags for core dumps binfmt_elf: Replace offsetof() with struct_size() in fill_note_info() exec: Fix incorrect type for ret |
||
|
|
8c1ed30218 |
Merge tag 'ffs-const-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull ffs const-attribute cleanups from Kees Cook:
"While working on various hardening refactoring a while back we
encountered inconsistencies in the application of __attribute_const__
on the ffs() family of functions.
This series fixes this across all archs and adds KUnit tests.
Notably, this found a theoretical underflow in PCI (also fixed here)
and uncovered an inefficiency in ARC (fixed in the ARC arch PR). I
kept the series separate from the general hardening PR since it is a
stand-alone "topic".
- PCI: Fix theoretical underflow in use of ffs().
- Universally apply __attribute_const__ to all architecture's
ffs()-family of functions.
- Add KUnit tests for ffs() behavior and const-ness"
* tag 'ffs-const-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
KUnit: ffs: Validate all the __attribute_const__ annotations
sparc: Add __attribute_const__ to ffs()-family implementations
xtensa: Add __attribute_const__ to ffs()-family implementations
s390: Add __attribute_const__ to ffs()-family implementations
parisc: Add __attribute_const__ to ffs()-family implementations
mips: Add __attribute_const__ to ffs()-family implementations
m68k: Add __attribute_const__ to ffs()-family implementations
openrisc: Add __attribute_const__ to ffs()-family implementations
riscv: Add __attribute_const__ to ffs()-family implementations
hexagon: Add __attribute_const__ to ffs()-family implementations
alpha: Add __attribute_const__ to ffs()-family implementations
sh: Add __attribute_const__ to ffs()-family implementations
powerpc: Add __attribute_const__ to ffs()-family implementations
x86: Add __attribute_const__ to ffs()-family implementations
csky: Add __attribute_const__ to ffs()-family implementations
bitops: Add __attribute_const__ to generic ffs()-family implementations
KUnit: Introduce ffs()-family tests
PCI: Test for bit underflow in pcie_set_readrq()
|
||
|
|
722df25ddf |
Merge tag 'kernel-6.18-rc1.clone3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull copy_process updates from Christian Brauner: "This contains the changes to enable support for clone3() on nios2 which apparently is still a thing. The more exciting part of this is that it cleans up the inconsistency in how the 64-bit flag argument is passed from copy_process() into the various other copy_*() helpers" [ Fixed up rv ltl_monitor 32-bit support as per Sasha Levin in the merge ] * tag 'kernel-6.18-rc1.clone3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: nios2: implement architecture-specific portion of sys_clone3 arch: copy_thread: pass clone_flags as u64 copy_process: pass clone_flags as u64 across calltree copy_sighand: Handle architectures where sizeof(unsigned long) < sizeof(u64) |
||
|
|
fec734e8d5 |
Merge tag 'riscv-for-linus-v6.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley: - A race-free implementation of pudp_huge_get_and_clear() (based on the x86 code) - A MAINTAINERS update to my E-mail address * tag 'riscv-for-linus-v6.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: MAINTAINERS: Update Paul Walmsley's E-mail address riscv: Use an atomic xchg in pudp_huge_get_and_clear() |
||
|
|
5f4b8c03f4 | Merge branches 'apple/dart', 'ti/omap', 'riscv', 'intel/vt-d' and 'amd/amd-vi' into next | ||
|
|
f30d7ccd13 |
RISC-V: Enable GPIO keyboard and event device in RV64 defconfig
The GPIO keyboard and event device can be used to receive graceful shutdown or reboot input keys so let us enable it by default for RV64 (just like ARM64). Signed-off-by: Anup Patel <apatel@ventanamicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Link: https://lore.kernel.org/r/20250818040920.272664-24-apatel@ventanamicro.com Signed-off-by: Paul Walmsley <pjw@kernel.org> |
||
|
|
bb96fb5a79 |
ACPI: RISC-V: Add RPMI System MSI to GSI mapping
The RPMI System MSI device will provide GSIs to downstream devices (such as GED) so add it to the RISC-V GSI to fwnode mapping. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Signed-off-by: Anup Patel <apatel@ventanamicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Link: https://lore.kernel.org/r/20250818040920.272664-20-apatel@ventanamicro.com Signed-off-by: Paul Walmsley <pjw@kernel.org> |
||
|
|
4d185fdeef |
ACPI: RISC-V: Add support to update gsi range
Some RISC-V interrupt controllers like RPMI based system MSI interrupt controllers do not have MADT entry defined. These interrupt controllers exist only in the namespace. ACPI spec defines _GSB method to get the GSI base of the interrupt controller, However, there is no such standard method to get the GSI range. To support such interrupt controllers, set the GSI range of such interrupt controllers to non-overlapping range and provide API for interrupt controller driver to update it with proper value. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Signed-off-by: Anup Patel <apatel@ventanamicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Link: https://lore.kernel.org/r/20250818040920.272664-19-apatel@ventanamicro.com Signed-off-by: Paul Walmsley <pjw@kernel.org> |
||
|
|
203e3beb73 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.17-rc8). Conflicts: drivers/net/can/spi/hi311x.c |
||
|
|
35561bab76 |
arch: Add the macro COMPILE_OFFSETS to all the asm-offsets.c
The include/generated/asm-offsets.h is generated in Kbuild during compiling from arch/SRCARCH/kernel/asm-offsets.c. When we want to generate another similar offset header file, circular dependency can happen. For example, we want to generate a offset file include/generated/test.h, which is included in include/sched/sched.h. If we generate asm-offsets.h first, it will fail, as include/sched/sched.h is included in asm-offsets.c and include/generated/test.h doesn't exist; If we generate test.h first, it can't success neither, as include/generated/asm-offsets.h is included by it. In x86_64, the macro COMPILE_OFFSETS is used to avoid such circular dependency. We can generate asm-offsets.h first, and if the COMPILE_OFFSETS is defined, we don't include the "generated/test.h". And we define the macro COMPILE_OFFSETS for all the asm-offsets.c for this purpose. Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> |
||
|
|
fee2f45def |
riscv: dts: eswin: add HiFive Premier P550 board device tree
Add minimal device tree for HiFive Premier P550 Development board Currently the data populated in this DT file is for UART. Signed-off-by: Min Lin <linmin@eswincomputing.com> Co-developed-by: Pinkesh Vaghela <pinkesh.vaghela@einfochips.com> Signed-off-by: Pinkesh Vaghela <pinkesh.vaghela@einfochips.com> Tested-by: Samuel Holland <samuel.holland@sifive.com> Tested-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com> Reviewed-by: Samuel Holland <samuel.holland@sifive.com> Link: https://lore.kernel.org/r/20250825132427.1618089-7-pinkesh.vaghela@einfochips.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
3329e2f3b5 |
riscv: dts: add initial support for EIC7700 SoC
Add initial support for EIC7700 SoC that uses a SiFive Quad-Core P550 CPU cluster. This file is expected to grow as more device drivers are added to the kernel. Signed-off-by: Min Lin <linmin@eswincomputing.com> Co-developed-by: Pritesh Patel <pritesh.patel@einfochips.com> Signed-off-by: Pritesh Patel <pritesh.patel@einfochips.com> Co-developed-by: Darshan Prajapati <darshan.prajapati@einfochips.com> Signed-off-by: Darshan Prajapati <darshan.prajapati@einfochips.com> Reviewed-by: Samuel Holland <samuel.holland@sifive.com> Tested-by: Samuel Holland <samuel.holland@sifive.com> Signed-off-by: Pinkesh Vaghela <pinkesh.vaghela@einfochips.com> Link: https://lore.kernel.org/r/20250825132427.1618089-6-pinkesh.vaghela@einfochips.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
faaf0ea597 |
riscv: Add Kconfig option for ESWIN platforms
Create a config option to build ESWIN SoC specific resources Signed-off-by: Pinkesh Vaghela <pinkesh.vaghela@einfochips.com> Reviewed-by: Samuel Holland <samuel.holland@sifive.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250825132427.1618089-3-pinkesh.vaghela@einfochips.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
508da38677 |
RISC-V: Add defines for the SBI message proxy extension
Add defines for the new SBI message proxy extension which is part of the SBI v3.0 specification. Reviewed-by: Atish Patra <atishp@rivosinc.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Co-developed-by: Rahul Pathak <rpathak@ventanamicro.com> Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com> Signed-off-by: Anup Patel <apatel@ventanamicro.com> Link: https://lore.kernel.org/r/20250818040920.272664-4-apatel@ventanamicro.com Signed-off-by: Paul Walmsley <pjw@kernel.org> |
||
|
|
ea78c19081 |
Merge tag 'soc-fixes-6.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"There are a few minor code fixes for tegra firmware, i.MX firmware
and the eyeq reset controller, and a MAINTAINERS update as Alyssa
Rosenzweig moves on to non-kernel projects.
The other changes are all for devicetree files:
- Multiple Marvell Armada SoCs need changes to fix PCIe, audio and
SATA
- A socfpga board fails to probe the ethernet phy
- The two temperature sensors on i.MX8MP are swapped
- Allwinner devicetree files cause build-time warnings
- Two Rockchip based boards need corrections for headphone detection
and SPI flash"
* tag 'soc-fixes-6.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: remove Alyssa Rosenzweig
firmware: tegra: Do not warn on missing memory-region property
arm64: dts: marvell: cn9132-clearfog: fix multi-lane pci x2 and x4 ports
arm64: dts: marvell: cn9132-clearfog: disable eMMC high-speed modes
arm64: dts: marvell: cn913x-solidrun: fix sata ports status
ARM: dts: kirkwood: Fix sound DAI cells for OpenRD clients
arm64: dts: imx8mp: Correct thermal sensor index
ARM: imx: Kconfig: Adjust select after renamed config option
firmware: imx: Add stub functions for SCMI CPU API
firmware: imx: Add stub functions for SCMI LMM API
firmware: imx: Add stub functions for SCMI MISC API
riscv: dts: allwinner: rename devterm i2c-gpio node to comply with binding
arm64: dts: rockchip: Fix the headphone detection on the orangepi 5
arm64: dts: rockchip: Add vcc supply for SPI Flash on NanoPC-T6
ARM: dts: socfpga: sodia: Fix mdio bus probe and PHY address
reset: eyeq: fix OF node leak
ARM64: dts: mcbin: fix SATA ports on Macchiatobin
ARM: dts: armada-370-db: Fix stereo audio input routing on Armada 370
ARM: dts: allwinner: Minor whitespace cleanup
|
||
|
|
23ef9d4397 |
kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI
The kernel's CFI implementation uses the KCFI ABI specifically, and is not strictly tied to a particular compiler. In preparation for GCC supporting KCFI, rename CONFIG_CFI_CLANG to CONFIG_CFI (along with associated options). Use new "transitional" Kconfig option for old CONFIG_CFI_CLANG that will enable CONFIG_CFI during olddefconfig. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250923213422.1105654-3-kees@kernel.org Signed-off-by: Kees Cook <kees@kernel.org> |
||
|
|
072c354797 |
Merge tag 'riscv-config-for-v6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/defconfig
RISC-V config for v6.18 Enable the MMP_PDMA driver as a module in defconfig builds, where it is needed by Spacemit K1 boards. This depends on a savedefconfig reorder that it'd otherwise conflict with, so that's here too. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-config-for-v6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: defconfig: Enable MMP_PDMA support for SpacemiT K1 SoC riscv: defconfig: run savedefconfig to reorder it Link: https://lore.kernel.org/r/20250924-unenvied-armful-5fcc80c23d19@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
8c0650e0ce |
Merge tag 'riscv-dt-for-v6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V Misc Devicetrees for v6.18 Starfive: The main new addition is support for the JH7110 Milk-V Mars CM lite SoM. Other than that, there's several cleanups done to the common JH7110 dtsi file, some relating to properties used by U-Boot or encountered during U-Boot development. Additionally, there's a binding and devicetree node for the memory controller on the JH7110. The memory controller only sees use in U-Boot, so the binding is here rather than in Krzysztof's branch. SiFive: Support for SiFive vendor-specific extensions in the binding file for extensions. These currently only see use in the SBI implementation. Microchip: Addition of support for the PolarFire SoC Discovery kit and non-engineering sample Icicle kit. The latter differs very slightly from the final ES devices due to bug fixes affecting functionality, and needs its own dts. To reduce duplication, the common portion of the two Icicle kits are moved into a dtsi. There's a few minor fixes here too, mostly low-hanging fruit detected during the addition of the Discovery kit that were then applied to the Icicle. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-dt-for-v6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: dts: starfive: add Milk-V Mars CM Lite system-on-module dt-bindings: riscv: starfive: add milkv,marscm-lite riscv: dts: starfive: add Milk-V Mars CM system-on-module dt-bindings: riscv: starfive: add milkv,marscm-emmc riscv: dts: starfive: add common board dtsi for Milk-V Mars CM variants riscv: dts: microchip: add a device tree for Discovery Kit dt-bindings: riscv: microchip: document Discovery Kit riscv: dts: microchip: rename icicle kit ccc clock and other minor fixes riscv: dts: microchip: add icicle kit with production device dt-bindings: riscv: microchip: document icicle kit with production device riscv: dts: microchip: add common board dtsi for icicle kit variants riscv: dts: starfive: jh7110-common: drop mmc post-power-on-delay-ms riscv: dts: starfive: jh7110-common: drop no-mmc property from mmc1 riscv: dts: starfive: jh7110: bootph-pre-ram hinting needed by boot loader riscv: dts: starfive: jh7110: add DMC memory controller dt-bindings: memory-controllers: add StarFive JH7110 SoC DMC riscv: dts: starfive: jh7110-common: drop no-sdio property from mmc1 riscv: dts: microchip: Minor whitespace cleanup dt-bindings: riscv: Add SiFive vendor extensions description Link: https://lore.kernel.org/r/20250924-frighten-magazine-ee2f16e64638@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
546e42c8c6 |
riscv: Use an atomic xchg in pudp_huge_get_and_clear()
Make sure we return the right pud value and not a value that could
have been overwritten in between by a different core.
Fixes:
|
||
|
|
5eba504bb2 |
Merge tag 'sunxi-fixes-for-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
Allwinner fixes for 6.17 Two device tree style cleanups from the device tree maintainers. * tag 'sunxi-fixes-for-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: riscv: dts: allwinner: rename devterm i2c-gpio node to comply with binding ARM: dts: allwinner: Minor whitespace cleanup Link: https://lore.kernel.org/r/aMrsUfkTWx8g3bJ7@wens.tw Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
ec1ede181e |
Merge tag 'spacemit-dt-for-6.18-1' of https://github.com/spacemit-com/linux into soc/dt
RISC-V SpacemiT DT changes for 6.18 - Add OrangePi RV2 board support - Add reset support to UART driver - Add PDMA driver support - Remove sec_uart1 node * tag 'spacemit-dt-for-6.18-1' of https://github.com/spacemit-com/linux: riscv: dts: spacemit: uart: remove sec_uart1 device node riscv: dts: spacemit: Enable PDMA on Banana Pi F3 and Milkv Jupiter riscv: dts: spacemit: Add PDMA node for K1 SoC riscv: dts: spacemit: add UART resets for Soc K1 riscv: dts: spacemit: Add OrangePi RV2 board device tree dt-bindings: riscv: spacemit: Add OrangePi RV2 board Link: https://lore.kernel.org/r/20250919055525-GYC5766558@gentoo.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
17752efeca |
Merge tag 'sunxi-dt-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner Device Tree changes for 6.18 This tag contains two DT binding header changes that are shared with the clk tree. In this cycle we gained support for the MCU PRCM clock and reset controller on the A523/A527/T527 family of SoCs, the NPU which is a Vivante GC9000 IP block, and the NPU clock that was missing. The other PRCM clock controller gained default bus clock rate settings. These were not configured in the upstream U-boot bootloader, leading to them running at slower rates. The assigned rates are from the user manual. There is also a new board, the NetCube Systems Nagami SoM and two of its carrier boards. The A523 family development boards now have their internal RTC clocks configured correctly, so that the RTC does not drift wildly. The missing functions for the AXP717 on these boards are added. Missing reset GPIOs and delays for Ethernet PHYs are added. Last, the Cubie A5E now has its LEDs described and usable. An overlay for the Orange Pi Zero interface (addon) board was added. This can be used with the Orange Pi Zero and Zero Plus 2. Default audio routing for these two boards (to be used with the addon) were added to complement the overlay. * tag 'sunxi-dt-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: sun55i: Complete AXP717A sub-functions arm64: dts: allwinner: t527: orangepi-4a: hook up external 32k crystal arm64: dts: allwinner: t527: avaota-a1: hook up external 32k crystal arm64: dts: allwinner: a527: cubie-a5e: Drop external 32.768 KHz crystal arm64: dts: sun55i: a523: Assign standard clock rates to PRCM bus clocks ARM: dts: sunxi: add support for NetCube Systems Nagami Keypad Carrier ARM: dts: sunxi: add support for NetCube Systems Nagami Basic Carrier ARM: dts: sunxi: add support for NetCube Systems Nagami SoM riscv: dts: allwinner: d1s-t113: Add pinctrl's required by NetCube Systems Nagami SoM dt-bindings: arm: sunxi: Add NetCube Systems Nagami SoM and carrier board bindings ARM: dts: allwinner: Add Orange Pi Zero Interface Board overlay ARM: dts: allwinner: orangepi-zero-plus2: Add default audio routing ARM: dts: allwinner: orangepi-zero: Add default audio routing arm64: dts: allwinner: a523: Add NPU device node arm64: dts: allwinner: a523: Add MCU PRCM CCU node dt-bindings: clock: sun55i-a523-ccu: Add A523 MCU CCU clock controller dt-bindings: clock: sun55i-a523-ccu: Add missing NPU module clock arm64: dts: allwinner: t527: avaota-a1: Add ethernet PHY reset setting arm64: dts: allwinner: a527: cubie-a5e: Add ethernet PHY reset setting arm64: dts: allwinner: a527: cubie-a5e: Add LEDs Link: https://lore.kernel.org/r/aMrtuZg8HlR--TAt@wens.tw Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
0651061855 |
Merge tag 'riscv-sophgo-dt-for-v6.18' of https://github.com/sophgo/linux into soc/dt
RISC-V Devicetrees for v6.18 Sophgo: Minor changes here only for SG2042. Enable numa and we can see significant performance improvements, for example in the STREAM test. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * tag 'riscv-sophgo-dt-for-v6.18' of https://github.com/sophgo/linux: dts: sophgo: sg2042: added numa id description Link: https://lore.kernel.org/r/MAUPR01MB11072ABA02A18CC7AA9B88874FE17A@MAUPR01MB11072.INDPRD01.PROD.OUTLOOK.COM Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
d0bf7cd5df |
riscv: bpf: Fix uninitialized symbol 'retval_off'
In the __arch_prepare_bpf_trampoline() function, retval_off is only meaningful when save_ret is true, so the current logic is correct. However, in the original logic, retval_off is only initialized under certain conditions; for example, in the fmod_ret logic, the compiler is not aware that the flags of the fmod_ret program (prog) have set BPF_TRAMP_F_CALL_ORIG, which results in an uninitialized symbol compilation warning. So initialize retval_off unconditionally to fix it. Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn> Reviewed-by: Pu Lehui <pulehui@huawei.com> Link: https://lore.kernel.org/r/20250922062244.822937-2-duanchenghao@kylinos.cn Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
|
a91ae3c893 |
bpf, x86: Add support for signed arena loads
Currently, signed load instructions into arena memory are unsupported. The compiler is free to generate these, and on GCC-14 we see a corresponding error when it happens. The hurdle in supporting them is deciding which unused opcode to use to mark them for the JIT's own consumption. After much thinking, it appears 0xc0 / BPF_NOSPEC can be combined with load instructions to identify signed arena loads. Use this to recognize and JIT them appropriately, and remove the verifier side limitation on the program if the JIT supports them. Co-developed-by: Puranjay Mohan <puranjay@kernel.org> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Puranjay Mohan <puranjay@kernel.org> Link: https://lore.kernel.org/r/20250923110157.18326-2-puranjay@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
|
5e8fce2016 |
riscv: stop calling page_address() in free_pages()
free_pages() should be used when we only have a virtual address. We should call __free_pages() directly on our page instead. Link: https://lkml.kernel.org/r/20250903185921.1785167-5-vishal.moola@gmail.com Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Alexandre Ghiti <alexghiti@rivosinc.com> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Andy Lutomirski <luto@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Justin Sanders <justin@coraid.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Cc: SeongJae Park <sj@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
e45085f267 |
kasan: call kasan_init_generic in kasan_init
Call kasan_init_generic() which handles Generic KASAN initialization. For architectures that do not select ARCH_DEFER_KASAN, this will be a no-op for the runtime flag but will print the initialization banner. For SW_TAGS and HW_TAGS modes, their respective init functions will handle the flag enabling, if they are enabled/implemented. Link: https://lkml.kernel.org/r/20250810125746.1105476-3-snovitoll@gmail.com Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217049 Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com> Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com> [riscv] Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390] Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Alexander Potapenko <glider@google.com> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Baoquan He <bhe@redhat.com> Cc: David Gow <davidgow@google.com> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@loongson.cn> Cc: Marco Elver <elver@google.com> Cc: Qing Zhang <zhangqing@loongson.cn> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
bc9950b56f |
Merge branch 'mm-hotfixes-stable' into mm-stable in order to pick up
changes required by mm-stable material: hugetlb and damon. |
||
|
|
95ee3364b2 |
Merge 6.17-rc6 into kbuild-next
Commit |
||
|
|
0b0ca959d2 |
riscv: errata: Fix the PAUSE Opcode for MIPS P8700
Add ERRATA_MIPS and ERRATA_MIPS_P8700_PAUSE_OPCODE configs. Handle errata for the MIPS PAUSE instruction. Signed-off-by: Djordje Todorovic <djordje.todorovic@htecgroup.com> Signed-off-by: Aleksandar Rikalo <arikalo@gmail.com> Signed-off-by: Raj Vishwanathan4 <rvishwanathan@mips.com> Signed-off-by: Aleksa Paunovic <aleksa.paunovic@htecgroup.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20250724-p8700-pause-v5-7-a6cbbe1c3412@htecgroup.com [pjw@kernel.org: updated to apply and compile; fixed a checkpatch issue] Signed-off-by: Paul Walmsley <pjw@kernel.org> |
||
|
|
bb4b0f8a1b |
riscv: hwprobe: Add MIPS vendor extension probing
Add a new hwprobe key "RISCV_HWPROBE_KEY_VENDOR_EXT_MIPS_0" which allows userspace to probe for the new xmipsexectl vendor extension. Signed-off-by: Aleksa Paunovic <aleksa.paunovic@htecgroup.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20250724-p8700-pause-v5-4-a6cbbe1c3412@htecgroup.com [pjw@kernel.org: fixed some checkpatch issues] Signed-off-by: Paul Walmsley <pjw@kernel.org> |