Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:

 - fix failure to add bond interfaces to a bridge, the offload-handling
   code was too defensive there and recent refactoring unearthed that.
   Users complained (Ido)

 - fix unnecessarily reflecting ECN bits within TOS values / QoS marking
   in TCP ACK and reset packets (Wei)

 - fix a deadlock with bpf iterator. Hopefully we're in the clear on
   this front now... (Yonghong)

 - BPF fix for clobbering r2 in bpf_gen_ld_abs (Daniel)

 - fix AQL on mt76 devices with FW rate control and add a couple of AQL
   issues in mac80211 code (Felix)

 - fix authentication issue with mwifiex (Maximilian)

 - WiFi connectivity fix: revert IGTK support in ti/wlcore (Mauro)

 - fix exception handling for multipath routes via same device (David
   Ahern)

 - revert back to a BH spin lock flavor for nsid_lock: there are paths
   which do require the BH context protection (Taehee)

 - fix interrupt / queue / NAPI handling in the lantiq driver (Hauke)

 - fix ife module load deadlock (Cong)

 - make an adjustment to netlink reply message type for code added in
   this release (the sole change touching uAPI here) (Michal)

 - a number of fixes for small NXP and Microchip switches (Vladimir)

[ Pull request acked by David: "you can expect more of this in the
  future as I try to delegate more things to Jakub" ]

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (167 commits)
  net: mscc: ocelot: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
  net: dsa: seville: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
  net: dsa: felix: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
  inet_diag: validate INET_DIAG_REQ_PROTOCOL attribute
  net: bridge: br_vlan_get_pvid_rcu() should dereference the VLAN group under RCU
  net: Update MAINTAINERS for MediaTek switch driver
  net/mlx5e: mlx5e_fec_in_caps() returns a boolean
  net/mlx5e: kTLS, Avoid kzalloc(GFP_KERNEL) under spinlock
  net/mlx5e: kTLS, Fix leak on resync error flow
  net/mlx5e: kTLS, Add missing dma_unmap in RX resync
  net/mlx5e: kTLS, Fix napi sync and possible use-after-free
  net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported
  net/mlx5e: Fix using wrong stats_grps in mlx5e_update_ndo_stats()
  net/mlx5e: Fix multicast counter not up-to-date in "ip -s"
  net/mlx5e: Fix endianness when calculating pedit mask first bit
  net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported
  net/mlx5e: CT: Fix freeing ct_label mapping
  net/mlx5e: Fix memory leak of tunnel info when rule under multipath not ready
  net/mlx5e: Use synchronize_rcu to sync with NAPI
  net/mlx5e: Use RCU to protect rq->xdp_prog
  ...

tools/testing/selftests/bpf/progs/bpf_iter_bpf_hash_map.c

@@ -47,7 +47,10 @@ int dump_bpf_hash_map(struct bpf_iter__bpf_map_elem *ctx)
 	__u32 seq_num = ctx->meta->seq_num;
 	struct bpf_map *map = ctx->map;
 	struct key_t *key = ctx->key;
+	struct key_t tmp_key;
 	__u64 *val = ctx->value;
+	__u64 tmp_val = 0;
+	int ret;
 
 	if (in_test_mode) {
 		/* test mode is used by selftests to
@@ -61,6 +64,18 @@ int dump_bpf_hash_map(struct bpf_iter__bpf_map_elem *ctx)
 		if (key == (void *)0 || val == (void *)0)
 			return 0;
 
+		/* update the value and then delete the <key, value> pair.
+		 * it should not impact the existing 'val' which is still
+		 * accessible under rcu.
+		 */
+		__builtin_memcpy(&tmp_key, key, sizeof(struct key_t));
+		ret = bpf_map_update_elem(&hashmap1, &tmp_key, &tmp_val, 0);
+		if (ret)
+			return 0;
+		ret = bpf_map_delete_elem(&hashmap1, &tmp_key);
+		if (ret)
+			return 0;
+
 		key_sum_a += key->a;
 		key_sum_b += key->b;
 		key_sum_c += key->c;

tools/testing/selftests/net/rtnetlink.sh

@@ -1175,6 +1175,51 @@ kci_test_neigh_get()
 	echo "PASS: neigh get"
 }
 
+kci_test_bridge_parent_id()
+{
+	local ret=0
+	sysfsnet=/sys/bus/netdevsim/devices/netdevsim
+	probed=false
+
+	if [ ! -w /sys/bus/netdevsim/new_device ] ; then
+		modprobe -q netdevsim
+		check_err $?
+		if [ $ret -ne 0 ]; then
+			echo "SKIP: bridge_parent_id can't load netdevsim"
+			return $ksft_skip
+		fi
+		probed=true
+	fi
+
+	echo "10 1" > /sys/bus/netdevsim/new_device
+	while [ ! -d ${sysfsnet}10 ] ; do :; done
+	echo "20 1" > /sys/bus/netdevsim/new_device
+	while [ ! -d ${sysfsnet}20 ] ; do :; done
+	udevadm settle
+	dev10=`ls ${sysfsnet}10/net/`
+	dev20=`ls ${sysfsnet}20/net/`
+
+	ip link add name test-bond0 type bond mode 802.3ad
+	ip link set dev $dev10 master test-bond0
+	ip link set dev $dev20 master test-bond0
+	ip link add name test-br0 type bridge
+	ip link set dev test-bond0 master test-br0
+	check_err $?
+
+	# clean up any leftovers
+	ip link del dev test-br0
+	ip link del dev test-bond0
+	echo 20 > /sys/bus/netdevsim/del_device
+	echo 10 > /sys/bus/netdevsim/del_device
+	$probed && rmmod netdevsim
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: bridge_parent_id"
+		return 1
+	fi
+	echo "PASS: bridge_parent_id"
+}
+
 kci_test_rtnl()
 {
 	local ret=0
@@ -1224,6 +1269,8 @@ kci_test_rtnl()
 	check_err $?
 	kci_test_neigh_get
 	check_err $?
+	kci_test_bridge_parent_id
+	check_err $?
 
 	kci_del_dummy
 	return $ret