Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits)
  GRETH: resolve SMP issues and other problems
  GRETH: handle frame error interrupts
  GRETH: avoid writing bad speed/duplex when setting transfer mode
  GRETH: fixed skb buffer memory leak on frame errors
  GRETH: GBit transmit descriptor handling optimization
  GRETH: fix opening/closing
  GRETH: added raw AMBA vendor/device number to match against.
  cassini: Fix build bustage on x86.
  e1000e: consistent use of Rx/Tx vs. RX/TX/rx/tx in comments/logs
  e1000e: update Copyright for 2011
  e1000: Avoid unhandled IRQ
  r8169: keep firmware in memory.
  netdev: tilepro: Use is_unicast_ether_addr helper
  etherdevice.h: Add is_unicast_ether_addr function
  ks8695net: Use default implementation of ethtool_ops::get_link
  ks8695net: Disable non-working ethtool operations
  USB CDC NCM: Don't deref NULL in cdc_ncm_rx_fixup() and don't use uninitialized variable.
  vxge: Remember to release firmware after upgrading firmware
  netdev: bfin_mac: Remove is_multicast_ether_addr use in netdev_for_each_mc_addr
  ipsec: update MAX_AH_AUTH_LEN to support sha512
  ...

include/linux/etherdevice.h

@@ -98,6 +98,17 @@ static inline int is_broadcast_ether_addr(const u8 *addr)
 	return (addr[0] & addr[1] & addr[2] & addr[3] & addr[4] & addr[5]) == 0xff;
 }
 
+/**
+ * is_unicast_ether_addr - Determine if the Ethernet address is unicast
+ * @addr: Pointer to a six-byte array containing the Ethernet address
+ *
+ * Return true if the address is a unicast address.
+ */
+static inline int is_unicast_ether_addr(const u8 *addr)
+{
+	return !is_multicast_ether_addr(addr);
+}
+
 /**
  * is_valid_ether_addr - Determine if the given Ethernet address is valid
  * @addr: Pointer to a six-byte array containing the Ethernet address

include/linux/netdevice.h

@@ -520,9 +520,6 @@ struct netdev_queue {
 	 * please use this field instead of dev->trans_start
 	 */
 	unsigned long		trans_start;
-	u64			tx_bytes;
-	u64			tx_packets;
-	u64			tx_dropped;
 } ____cacheline_aligned_in_smp;
 
 static inline int netdev_queue_numa_node_read(const struct netdev_queue *q)
@@ -2265,8 +2262,6 @@ extern void		dev_load(struct net *net, const char *name);
 extern void		dev_mcast_init(void);
 extern struct rtnl_link_stats64 *dev_get_stats(struct net_device *dev,
 					       struct rtnl_link_stats64 *storage);
-extern void		dev_txq_stats_fold(const struct net_device *dev,
-					   struct rtnl_link_stats64 *stats);
 
 extern int		netdev_max_backlog;
 extern int		netdev_tstamp_prequeue;

include/linux/nl80211.h

@@ -148,6 +148,10 @@
  * @NL80211_CMD_SET_MPATH:  Set mesh path attributes for mesh path to
  * 	destination %NL80211_ATTR_MAC on the interface identified by
  * 	%NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by
+ *	%NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
+ * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
+ *	%NL80211_ATTR_MAC.
  * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
  *	the interface identified by %NL80211_ATTR_IFINDEX.
  * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
@@ -612,7 +616,7 @@ enum nl80211_commands {
  *	consisting of a nested array.
  *
  * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
- * @NL80211_ATTR_PLINK_ACTION: action to perform on the mesh peer link.
+ * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link.
  * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
  * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
  * 	info given for %NL80211_CMD_GET_MPATH, nested attribute described at
@@ -879,7 +883,9 @@ enum nl80211_commands {
  *	See &enum nl80211_key_default_types.
  *
  * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters.  These cannot be
- * changed once the mesh is active.
+ *	changed once the mesh is active.
+ * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute
+ *	containing attributes from &enum nl80211_meshconf_params.
  *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -1225,8 +1231,6 @@ enum nl80211_rate_info {
  * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
  * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
  * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
- * @__NL80211_STA_INFO_AFTER_LAST: internal
- * @NL80211_STA_INFO_MAX: highest possible station info attribute
  * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
  * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
  * 	containing info as possible, see &enum nl80211_sta_info_txrate.
@@ -1236,6 +1240,11 @@ enum nl80211_rate_info {
  * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
  * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
  * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
+ * @NL80211_STA_INFO_LLID: the station's mesh LLID
+ * @NL80211_STA_INFO_PLID: the station's mesh PLID
+ * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station
+ * @__NL80211_STA_INFO_AFTER_LAST: internal
+ * @NL80211_STA_INFO_MAX: highest possible station info attribute
  */
 enum nl80211_sta_info {
 	__NL80211_STA_INFO_INVALID,
@@ -1626,7 +1635,7 @@ enum nl80211_mntr_flags {
  * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
  * that it takes for an HWMP information element to propagate across the mesh
  *
- * @NL80211_MESHCONF_ROOTMODE: whether root mode is enabled or not
+ * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not
  *
  * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a
  * source mesh point for path selection elements.
@@ -1678,6 +1687,7 @@ enum nl80211_meshconf_params {
  * element that vendors will use to identify the path selection methods and
  * metrics in use.
  *
+ * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
  * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
  */
 enum nl80211_mesh_setup_params {

include/linux/skbuff.h

@@ -255,6 +255,11 @@ typedef unsigned int sk_buff_data_t;
 typedef unsigned char *sk_buff_data_t;
 #endif
 
+#if defined(CONFIG_NF_DEFRAG_IPV4) || defined(CONFIG_NF_DEFRAG_IPV4_MODULE) || \
+    defined(CONFIG_NF_DEFRAG_IPV6) || defined(CONFIG_NF_DEFRAG_IPV6_MODULE)
+#define NET_SKBUFF_NF_DEFRAG_NEEDED 1
+#endif
+
 /** 
  *	struct sk_buff - socket buffer
  *	@next: Next buffer in list
@@ -362,6 +367,8 @@ struct sk_buff {
 	void			(*destructor)(struct sk_buff *skb);
 #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
 	struct nf_conntrack	*nfct;
+#endif
+#ifdef NET_SKBUFF_NF_DEFRAG_NEEDED
 	struct sk_buff		*nfct_reasm;
 #endif
 #ifdef CONFIG_BRIDGE_NETFILTER
@@ -2057,6 +2064,8 @@ static inline void nf_conntrack_get(struct nf_conntrack *nfct)
 	if (nfct)
 		atomic_inc(&nfct->use);
 }
+#endif
+#ifdef NET_SKBUFF_NF_DEFRAG_NEEDED
 static inline void nf_conntrack_get_reasm(struct sk_buff *skb)
 {
 	if (skb)
@@ -2085,6 +2094,8 @@ static inline void nf_reset(struct sk_buff *skb)
 #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
 	nf_conntrack_put(skb->nfct);
 	skb->nfct = NULL;
+#endif
+#ifdef NET_SKBUFF_NF_DEFRAG_NEEDED
 	nf_conntrack_put_reasm(skb->nfct_reasm);
 	skb->nfct_reasm = NULL;
 #endif
@@ -2101,6 +2112,8 @@ static inline void __nf_copy(struct sk_buff *dst, const struct sk_buff *src)
 	dst->nfct = src->nfct;
 	nf_conntrack_get(src->nfct);
 	dst->nfctinfo = src->nfctinfo;
+#endif
+#ifdef NET_SKBUFF_NF_DEFRAG_NEEDED
 	dst->nfct_reasm = src->nfct_reasm;
 	nf_conntrack_get_reasm(src->nfct_reasm);
 #endif
@@ -2114,6 +2127,8 @@ static inline void nf_copy(struct sk_buff *dst, const struct sk_buff *src)
 {
 #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
 	nf_conntrack_put(dst->nfct);
+#endif
+#ifdef NET_SKBUFF_NF_DEFRAG_NEEDED
 	nf_conntrack_put_reasm(dst->nfct_reasm);
 #endif
 #ifdef CONFIG_BRIDGE_NETFILTER

include/net/ah.h

@@ -4,7 +4,7 @@
 #include <linux/skbuff.h>
 
 /* This is the maximum truncated ICV length that we know of. */
-#define MAX_AH_AUTH_LEN	16
+#define MAX_AH_AUTH_LEN	64
 
 struct crypto_ahash;
 

include/net/cfg80211.h

@@ -1103,6 +1103,8 @@ struct cfg80211_pmksa {
  * @change_mpath: change a given mesh path
  * @get_mpath: get a mesh path for the given parameters
  * @dump_mpath: dump mesh path callback -- resume dump at index @idx
+ * @join_mesh: join the mesh network with the specified parameters
+ * @leave_mesh: leave the current mesh network
  *
  * @get_mesh_config: Get the current mesh configuration
  *

include/net/mac80211.h

@@ -337,6 +337,10 @@ struct ieee80211_bss_conf {
  * @IEEE80211_TX_CTL_LDPC: tells the driver to use LDPC for this frame
  * @IEEE80211_TX_CTL_STBC: Enables Space-Time Block Coding (STBC) for this
  *	frame and selects the maximum number of streams that it can use.
+ * @IEEE80211_TX_CTL_TX_OFFCHAN: Marks this packet to be transmitted on
+ *	the off-channel channel when a remain-on-channel offload is done
+ *	in hardware -- normal packets still flow and are expected to be
+ *	handled properly by the device.
  *
  * Note: If you have to add new flags to the enumeration, then don't
  *	 forget to update %IEEE80211_TX_TEMPORARY_FLAGS when necessary.
@@ -1753,6 +1757,16 @@ enum ieee80211_ampdu_mlme_action {
  *	(also see nl80211.h @NL80211_ATTR_WIPHY_ANTENNA_TX).
  *
  * @get_antenna: Get current antenna configuration from device (tx_ant, rx_ant).
+ *
+ * @remain_on_channel: Starts an off-channel period on the given channel, must
+ *	call back to ieee80211_ready_on_channel() when on that channel. Note
+ *	that normal channel traffic is not stopped as this is intended for hw
+ *	offload. Frames to transmit on the off-channel channel are transmitted
+ *	normally except for the %IEEE80211_TX_CTL_TX_OFFCHAN flag. When the
+ *	duration (which will always be non-zero) expires, the driver must call
+ *	ieee80211_remain_on_channel_expired(). This callback may sleep.
+ * @cancel_remain_on_channel: Requests that an ongoing off-channel period is
+ *	aborted before it expires. This callback may sleep.
  */
 struct ieee80211_ops {
 	int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);

include/net/netfilter/ipv6/nf_conntrack_ipv6.h

@@ -7,16 +7,6 @@ extern struct nf_conntrack_l4proto nf_conntrack_l4proto_tcp6;
 extern struct nf_conntrack_l4proto nf_conntrack_l4proto_udp6;
 extern struct nf_conntrack_l4proto nf_conntrack_l4proto_icmpv6;
 
-extern int nf_ct_frag6_init(void);
-extern void nf_ct_frag6_cleanup(void);
-extern struct sk_buff *nf_ct_frag6_gather(struct sk_buff *skb, u32 user);
-extern void nf_ct_frag6_output(unsigned int hooknum, struct sk_buff *skb,
-			       struct net_device *in,
-			       struct net_device *out,
-			       int (*okfn)(struct sk_buff *));
-
-struct inet_frags_ctl;
-
 #include <linux/sysctl.h>
 extern struct ctl_table nf_ct_ipv6_sysctl_table[];
 

include/net/netfilter/ipv6/nf_defrag_ipv6.h

@@ -3,4 +3,14 @@
 
 extern void nf_defrag_ipv6_enable(void);
 
+extern int nf_ct_frag6_init(void);
+extern void nf_ct_frag6_cleanup(void);
+extern struct sk_buff *nf_ct_frag6_gather(struct sk_buff *skb, u32 user);
+extern void nf_ct_frag6_output(unsigned int hooknum, struct sk_buff *skb,
+			       struct net_device *in,
+			       struct net_device *out,
+			       int (*okfn)(struct sk_buff *));
+
+struct inet_frags_ctl;
+
 #endif /* _NF_DEFRAG_IPV6_H */

include/net/red.h

@@ -97,7 +97,6 @@ struct red_stats {
 	u32		forced_mark;	/* Forced marks, qavg > max_thresh */
 	u32		pdrop;          /* Drops due to queue limits */
 	u32		other;          /* Drops due to drop() calls */
-	u32		backlog;
 };
 
 struct red_parms {