Merge tag 'mfd-next-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for ROHM BD71828 PMICs and GPIOs
- Add support for Qualcomm Aqstic Audio Codecs WCD9340 and WCD9341
New Device Support:
- Add support for BD71828 to BD70528 RTC driver
- Add support for Intel's Jasper Lake to LPSS PCI
New Functionality:
- Add support for Power Key to ROHM BD71828
- Add support for Clocks to ROHM BD71828
- Add support for GPIOs to Dialog DA9062
- Add support for USB PD Notify to ChromiumOS EC
- Allow callers to specify args when requesting regmap lookup; syscon
Fix-ups:
- Improve error handling and sanity checking; atmel-hlcdc, dln2
- Device Tree support/documentation; bd71828, da9062, xylon,logicvc,
ab8500, max14577, atmel-usart
- Match devices using platform IDs; bd7xxxx
- Refactor BD718x7 regulator component; bd718x7-regulator
- Use standard interfaces/helpers; syscon, sm501
- Trivial (whitespace, spelling, etc); ab8500-core, Kconfig
- Remove unused code; db8500-prcmu, tqmx86
- Wait until boot has finished before accessing registers;
madera-core
- Provide missing register value defaults; cs47l15-tables
- Allow more time for hardware to reset; madera-core
Bug Fixes:
- Fix erroneous register values; rohm-bd70528
- Fix register volatility; axp20x, rn5t618
- Fix Kconfig dependencies; MFD_MAX77650
- Fix incorrect compatible string; da9062-core
- Fix syscon_regmap_lookup_by_phandle_args() stub; syscon"
* tag 'mfd-next-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (41 commits)
mfd: syscon: Fix syscon_regmap_lookup_by_phandle_args() dummy
mfd: wcd934x: Add support to wcd9340/wcd9341 codec
mfd: syscon: Add arguments support for syscon reference
mfd: rn5t618: Mark ADC control register volatile
dt-bindings: atmel-usart: Add microchip,sam9x60-{usart, dbgu}
dt-bindings: atmel-usart: Remove wildcard
mfd: cros_ec: Add cros-usbpd-notify subdevice
mfd: da9062: Fix watchdog compatible string
mfd: madera: Allow more time for hardware reset
mfd: cs47l15: Add missing register default
mfd: madera: Wait for boot done before accessing any other registers
mfd: Kconfig: Rename Samsung to lowercase
mfd: tqmx86: remove set but not used variable 'i2c_ien'
mfd: dbx500-prcmu: Drop DSI pll clock functions
mfd: dbx500-prcmu: Drop set_display_clocks()
mfd: max77650: Select REGMAP_IRQ in Kconfig
mfd: axp20x: Mark AXP20X_VBUS_IPSOUT_MGMT as volatile
mfd: ab8500: Fix ab8500-clk typo
mfd: intel-lpss: Add Intel Jasper Lake PCI IDs
dt-bindings: mfd: max14577: Add reference to max14040_battery.txt descriptions
...
This commit is contained in:
Linus Torvalds
@@ -0,0 +1,52 @@
|
||||
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/leds/rohm,bd71828-leds.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: ROHM BD71828 Power Management Integrated Circuit LED driver
|
||||
|
||||
maintainers:
|
||||
- Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
|
||||
|
||||
description: |
|
||||
This module is part of the ROHM BD71828 MFD device. For more details
|
||||
see Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml.
|
||||
|
||||
The LED controller is represented as a sub-node of the PMIC node on the device
|
||||
tree.
|
||||
|
||||
The device has two LED outputs referred as GRNLED and AMBLED in data-sheet.
|
||||
|
||||
select: false
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: rohm,bd71828-leds
|
||||
|
||||
patternProperties:
|
||||
"^led-[1-2]$":
|
||||
type: object
|
||||
description:
|
||||
Properties for a single LED.
|
||||
properties:
|
||||
#allOf:
|
||||
#- $ref: "common.yaml#"
|
||||
rohm,led-compatible:
|
||||
description: LED identification string
|
||||
allOf:
|
||||
- $ref: "/schemas/types.yaml#/definitions/string"
|
||||
- enum:
|
||||
- bd71828-ambled
|
||||
- bd71828-grnled
|
||||
function:
|
||||
description:
|
||||
Purpose of LED as defined in dt-bindings/leds/common.h
|
||||
$ref: "/schemas/types.yaml#/definitions/string"
|
||||
color:
|
||||
description:
|
||||
LED colour as defined in dt-bindings/leds/common.h
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
|
||||
required:
|
||||
- compatible
|
||||
@@ -1,7 +1,7 @@
|
||||
* AB8500 Multi-Functional Device (MFD)
|
||||
|
||||
Required parent device properties:
|
||||
- compatible : contains "stericsson,ab8500";
|
||||
- compatible : contains "stericsson,ab8500" or "stericsson,ab8505";
|
||||
- interrupts : contains the IRQ line for the AB8500
|
||||
- interrupt-controller : describes the AB8500 as an Interrupt Controller (has its own domain)
|
||||
- #interrupt-cells : should be 2, for 2-cell format
|
||||
@@ -49,11 +49,13 @@ ab8500-charger : : vddadc : Charger interface
|
||||
: CH_WD_EXP : : Charger watchdog detected
|
||||
ab8500-gpadc : HW_CONV_END : vddadc : Analogue to Digital Converter
|
||||
SW_CONV_END : :
|
||||
ab8500-gpio : : : GPIO Controller
|
||||
ab8500-gpio : : : GPIO Controller (AB8500)
|
||||
ab8505-gpio : : : GPIO Controller (AB8505)
|
||||
ab8500-ponkey : ONKEY_DBF : : Power-on Key
|
||||
ONKEY_DBR : :
|
||||
ab8500-pwm : : : Pulse Width Modulator
|
||||
ab8500-regulator : : : Regulators
|
||||
ab8500-regulator : : : Regulators (AB8500)
|
||||
ab8505-regulator : : : Regulators (AB8505)
|
||||
ab8500-rtc : 60S : : Real Time Clock
|
||||
: ALARM : :
|
||||
ab8500-sysctrl : : : System Control
|
||||
|
||||
@@ -1,10 +1,13 @@
|
||||
* Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
|
||||
|
||||
Required properties for USART:
|
||||
- compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu"
|
||||
The compatible <chip> indicated will be the first SoC to support an
|
||||
additional mode or an USART new feature.
|
||||
For the dbgu UART, use "atmel,<chip>-dbgu", "atmel,<chip>-usart"
|
||||
- compatible: Should be one of the following:
|
||||
- "atmel,at91rm9200-usart"
|
||||
- "atmel,at91sam9260-usart"
|
||||
- "microchip,sam9x60-usart"
|
||||
- "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart"
|
||||
- "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"
|
||||
- "microchip,sam9x60-dbgu", "microchip,sam9x60-usart"
|
||||
- reg: Should contain registers location and length
|
||||
- interrupts: Should contain interrupt
|
||||
- clock-names: tuple listing input clock names.
|
||||
|
||||
@@ -13,6 +13,7 @@ da9062-rtc : : Real-Time Clock
|
||||
da9062-onkey : : On Key
|
||||
da9062-watchdog : : Watchdog Timer
|
||||
da9062-thermal : : Thermal
|
||||
da9062-gpio : : GPIOs
|
||||
|
||||
The DA9061 PMIC consists of:
|
||||
|
||||
@@ -38,6 +39,15 @@ Required properties:
|
||||
See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
|
||||
further information on IRQ bindings.
|
||||
|
||||
Optional properties:
|
||||
|
||||
- gpio-controller : Marks the device as a gpio controller.
|
||||
- #gpio-cells : Should be two. The first cell is the pin number and the
|
||||
second cell is used to specify the gpio polarity.
|
||||
|
||||
See Documentation/devicetree/bindings/gpio/gpio.txt for further information on
|
||||
GPIO bindings.
|
||||
|
||||
Sub-nodes:
|
||||
|
||||
- regulators : This node defines the settings for the LDOs and BUCKs.
|
||||
|
||||
@@ -5,6 +5,8 @@ Battery Charger and SFOUT LDO output for powering USB devices. It is
|
||||
interfaced to host controller using I2C.
|
||||
|
||||
MAX77836 additionally contains PMIC (with two LDO regulators) and Fuel Gauge.
|
||||
For the description of Fuel Gauge low SOC alert interrupt see:
|
||||
../power/supply/max17040_battery.txt
|
||||
|
||||
|
||||
Required properties:
|
||||
|
||||
@@ -0,0 +1,193 @@
|
||||
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/mfd/rohm,bd71828-pmic.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: ROHM BD71828 Power Management Integrated Circuit bindings
|
||||
|
||||
maintainers:
|
||||
- Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
|
||||
|
||||
description: |
|
||||
BD71828GW is a single-chip power management IC for battery-powered portable
|
||||
devices. The IC integrates 7 buck converters, 7 LDOs, and a 1500 mA
|
||||
single-cell linear charger. Also included is a Coulomb counter, a real-time
|
||||
clock (RTC), and a 32.768 kHz clock gate.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: rohm,bd71828
|
||||
|
||||
reg:
|
||||
description:
|
||||
I2C slave address.
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
gpio-controller: true
|
||||
|
||||
"#gpio-cells":
|
||||
const: 2
|
||||
description: |
|
||||
The first cell is the pin number and the second cell is used to specify
|
||||
flags. See ../gpio/gpio.txt for more information.
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
|
||||
"#clock-cells":
|
||||
const: 0
|
||||
|
||||
rohm,charger-sense-resistor-ohms:
|
||||
minimum: 10000000
|
||||
maximum: 50000000
|
||||
description: |
|
||||
BD71827 and BD71828 have SAR ADC for measuring charging currents.
|
||||
External sense resistor (RSENSE in data sheet) should be used. If some
|
||||
other but 30MOhm resistor is used the resistance value should be given
|
||||
here in Ohms.
|
||||
|
||||
regulators:
|
||||
$ref: ../regulator/rohm,bd71828-regulator.yaml
|
||||
description:
|
||||
List of child nodes that specify the regulators.
|
||||
|
||||
leds:
|
||||
$ref: ../leds/rohm,bd71828-leds.yaml
|
||||
|
||||
gpio-reserved-ranges:
|
||||
description: |
|
||||
Usage of BD71828 GPIO pins can be changed via OTP. This property can be
|
||||
used to mark the pins which should not be configured for GPIO. Please see
|
||||
the ../gpio/gpio.txt for more information.
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- clocks
|
||||
- "#clock-cells"
|
||||
- regulators
|
||||
- gpio-controller
|
||||
- "#gpio-cells"
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pmic: pmic@4b {
|
||||
compatible = "rohm,bd71828";
|
||||
reg = <0x4b>;
|
||||
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
clocks = <&osc 0>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "bd71828-32k-out";
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-reserved-ranges = <0 1>, <2 1>;
|
||||
|
||||
rohm,charger-sense-resistor-ohms = <10000000>;
|
||||
|
||||
regulators {
|
||||
buck1: BUCK1 {
|
||||
regulator-name = "buck1";
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-ramp-delay = <2500>;
|
||||
};
|
||||
buck2: BUCK2 {
|
||||
regulator-name = "buck2";
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-ramp-delay = <2500>;
|
||||
};
|
||||
buck3: BUCK3 {
|
||||
regulator-name = "buck3";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
};
|
||||
buck4: BUCK4 {
|
||||
regulator-name = "buck4";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
buck5: BUCK5 {
|
||||
regulator-name = "buck5";
|
||||
regulator-min-microvolt = <2500000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
buck6: BUCK6 {
|
||||
regulator-name = "buck6";
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-ramp-delay = <2500>;
|
||||
};
|
||||
buck7: BUCK7 {
|
||||
regulator-name = "buck7";
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-ramp-delay = <2500>;
|
||||
};
|
||||
ldo1: LDO1 {
|
||||
regulator-name = "ldo1";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
ldo2: LDO2 {
|
||||
regulator-name = "ldo2";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
ldo3: LDO3 {
|
||||
regulator-name = "ldo3";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
ldo4: LDO4 {
|
||||
regulator-name = "ldo4";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
ldo5: LDO5 {
|
||||
regulator-name = "ldo5";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
ldo6: LDO6 {
|
||||
regulator-name = "ldo6";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
ldo7_reg: LDO7 {
|
||||
regulator-name = "ldo7";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "rohm,bd71828-leds";
|
||||
|
||||
led-1 {
|
||||
rohm,led-compatible = "bd71828-grnled";
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
};
|
||||
led-2 {
|
||||
rohm,led-compatible = "bd71828-ambled";
|
||||
function = LED_FUNCTION_CHARGING;
|
||||
color = <LED_COLOR_ID_AMBER>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
Reference in New Issue
Block a user