From 7b70689b07c1d336a5ad6906927aa413619029bd Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Wed, 29 Jul 2020 17:43:57 +0200 Subject: [PATCH 1/5] clk: meson: add sclk-ws driver This is yet another simple but odd driver for the audio block of the g12a and sm1 SoC families. For TDMOUT's sclk to be properly inverted, bit 29 of AUDIO_CLK_TDMOUT_x_CTRL should be the inverse of bit 28. IOW bit28 == !bit29 at all times This setting is automatically applied on axg and the manual setting was added on g12a. Signed-off-by: Jerome Brunet Link: https://lore.kernel.org/r/20200729154359.1983085-2-jbrunet@baylibre.com --- drivers/clk/meson/clk-phase.c | 56 +++++++++++++++++++++++++++++++++++ drivers/clk/meson/clk-phase.h | 6 ++++ 2 files changed, 62 insertions(+) diff --git a/drivers/clk/meson/clk-phase.c b/drivers/clk/meson/clk-phase.c index fe22e171121a..a6763439f7d2 100644 --- a/drivers/clk/meson/clk-phase.c +++ b/drivers/clk/meson/clk-phase.c @@ -125,6 +125,62 @@ const struct clk_ops meson_clk_triphase_ops = { }; EXPORT_SYMBOL_GPL(meson_clk_triphase_ops); +/* + * This is a special clock for the audio controller. + * This drive a bit clock inverter for which the + * opposite value of the inverter bit needs to be manually + * set into another bit + */ +static inline struct meson_sclk_ws_inv_data * +meson_sclk_ws_inv_data(struct clk_regmap *clk) +{ + return (struct meson_sclk_ws_inv_data *)clk->data; +} + +static int meson_sclk_ws_inv_sync(struct clk_hw *hw) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_sclk_ws_inv_data *tph = meson_sclk_ws_inv_data(clk); + unsigned int val; + + /* Get phase and sync the inverted value to ws */ + val = meson_parm_read(clk->map, &tph->ph); + meson_parm_write(clk->map, &tph->ws, val ? 0 : 1); + + return 0; +} + +static int meson_sclk_ws_inv_get_phase(struct clk_hw *hw) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_sclk_ws_inv_data *tph = meson_sclk_ws_inv_data(clk); + unsigned int val; + + val = meson_parm_read(clk->map, &tph->ph); + + return meson_clk_degrees_from_val(val, tph->ph.width); +} + +static int meson_sclk_ws_inv_set_phase(struct clk_hw *hw, int degrees) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_sclk_ws_inv_data *tph = meson_sclk_ws_inv_data(clk); + unsigned int val; + + val = meson_clk_degrees_to_val(degrees, tph->ph.width); + meson_parm_write(clk->map, &tph->ph, val); + meson_parm_write(clk->map, &tph->ws, val ? 0 : 1); + return 0; +} + +const struct clk_ops meson_sclk_ws_inv_ops = { + .init = meson_sclk_ws_inv_sync, + .get_phase = meson_sclk_ws_inv_get_phase, + .set_phase = meson_sclk_ws_inv_set_phase, +}; +EXPORT_SYMBOL_GPL(meson_sclk_ws_inv_ops); + + MODULE_DESCRIPTION("Amlogic phase driver"); MODULE_AUTHOR("Jerome Brunet "); MODULE_LICENSE("GPL v2"); diff --git a/drivers/clk/meson/clk-phase.h b/drivers/clk/meson/clk-phase.h index 5579f9ced142..b637b9b227bc 100644 --- a/drivers/clk/meson/clk-phase.h +++ b/drivers/clk/meson/clk-phase.h @@ -20,7 +20,13 @@ struct meson_clk_triphase_data { struct parm ph2; }; +struct meson_sclk_ws_inv_data { + struct parm ph; + struct parm ws; +}; + extern const struct clk_ops meson_clk_phase_ops; extern const struct clk_ops meson_clk_triphase_ops; +extern const struct clk_ops meson_sclk_ws_inv_ops; #endif /* __MESON_CLK_PHASE_H */ From cdabb1ffc7c2349b8930f752df1edcafc1d37cc1 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Wed, 29 Jul 2020 17:43:58 +0200 Subject: [PATCH 2/5] clk: meson: axg-audio: separate axg and g12a regmap tables There are more differences than what we initially thought. Let's keeps things clear and separate the axg and g12a regmap tables of the audio clock controller. Signed-off-by: Jerome Brunet Link: https://lore.kernel.org/r/20200729154359.1983085-3-jbrunet@baylibre.com --- drivers/clk/meson/axg-audio.c | 135 ++++++++++++++++++++++++++++++++-- 1 file changed, 127 insertions(+), 8 deletions(-) diff --git a/drivers/clk/meson/axg-audio.c b/drivers/clk/meson/axg-audio.c index 53715e36326c..9918cb375de3 100644 --- a/drivers/clk/meson/axg-audio.c +++ b/drivers/clk/meson/axg-audio.c @@ -1209,13 +1209,132 @@ static struct clk_hw_onecell_data sm1_audio_hw_onecell_data = { }; -/* Convenience table to populate regmap in .probe() - * Note that this table is shared between both AXG and G12A, - * with spdifout_b clocks being exclusive to G12A. Since those - * clocks are not declared within the AXG onecell table, we do not - * feel the need to have separate AXG/G12A regmap tables. - */ +/* Convenience table to populate regmap in .probe(). */ static struct clk_regmap *const axg_clk_regmaps[] = { + &ddr_arb, + &pdm, + &tdmin_a, + &tdmin_b, + &tdmin_c, + &tdmin_lb, + &tdmout_a, + &tdmout_b, + &tdmout_c, + &frddr_a, + &frddr_b, + &frddr_c, + &toddr_a, + &toddr_b, + &toddr_c, + &loopback, + &spdifin, + &spdifout, + &resample, + &power_detect, + &mst_a_mclk_sel, + &mst_b_mclk_sel, + &mst_c_mclk_sel, + &mst_d_mclk_sel, + &mst_e_mclk_sel, + &mst_f_mclk_sel, + &mst_a_mclk_div, + &mst_b_mclk_div, + &mst_c_mclk_div, + &mst_d_mclk_div, + &mst_e_mclk_div, + &mst_f_mclk_div, + &mst_a_mclk, + &mst_b_mclk, + &mst_c_mclk, + &mst_d_mclk, + &mst_e_mclk, + &mst_f_mclk, + &spdifout_clk_sel, + &spdifout_clk_div, + &spdifout_clk, + &spdifin_clk_sel, + &spdifin_clk_div, + &spdifin_clk, + &pdm_dclk_sel, + &pdm_dclk_div, + &pdm_dclk, + &pdm_sysclk_sel, + &pdm_sysclk_div, + &pdm_sysclk, + &mst_a_sclk_pre_en, + &mst_b_sclk_pre_en, + &mst_c_sclk_pre_en, + &mst_d_sclk_pre_en, + &mst_e_sclk_pre_en, + &mst_f_sclk_pre_en, + &mst_a_sclk_div, + &mst_b_sclk_div, + &mst_c_sclk_div, + &mst_d_sclk_div, + &mst_e_sclk_div, + &mst_f_sclk_div, + &mst_a_sclk_post_en, + &mst_b_sclk_post_en, + &mst_c_sclk_post_en, + &mst_d_sclk_post_en, + &mst_e_sclk_post_en, + &mst_f_sclk_post_en, + &mst_a_sclk, + &mst_b_sclk, + &mst_c_sclk, + &mst_d_sclk, + &mst_e_sclk, + &mst_f_sclk, + &mst_a_lrclk_div, + &mst_b_lrclk_div, + &mst_c_lrclk_div, + &mst_d_lrclk_div, + &mst_e_lrclk_div, + &mst_f_lrclk_div, + &mst_a_lrclk, + &mst_b_lrclk, + &mst_c_lrclk, + &mst_d_lrclk, + &mst_e_lrclk, + &mst_f_lrclk, + &tdmin_a_sclk_sel, + &tdmin_b_sclk_sel, + &tdmin_c_sclk_sel, + &tdmin_lb_sclk_sel, + &tdmout_a_sclk_sel, + &tdmout_b_sclk_sel, + &tdmout_c_sclk_sel, + &tdmin_a_sclk_pre_en, + &tdmin_b_sclk_pre_en, + &tdmin_c_sclk_pre_en, + &tdmin_lb_sclk_pre_en, + &tdmout_a_sclk_pre_en, + &tdmout_b_sclk_pre_en, + &tdmout_c_sclk_pre_en, + &tdmin_a_sclk_post_en, + &tdmin_b_sclk_post_en, + &tdmin_c_sclk_post_en, + &tdmin_lb_sclk_post_en, + &tdmout_a_sclk_post_en, + &tdmout_b_sclk_post_en, + &tdmout_c_sclk_post_en, + &tdmin_a_sclk, + &tdmin_b_sclk, + &tdmin_c_sclk, + &tdmin_lb_sclk, + &tdmout_a_sclk, + &tdmout_b_sclk, + &tdmout_c_sclk, + &tdmin_a_lrclk, + &tdmin_b_lrclk, + &tdmin_c_lrclk, + &tdmin_lb_lrclk, + &tdmout_a_lrclk, + &tdmout_b_lrclk, + &tdmout_c_lrclk, +}; + +static struct clk_regmap *const g12a_clk_regmaps[] = { &ddr_arb, &pdm, &tdmin_a, @@ -1713,8 +1832,8 @@ static const struct audioclk_data axg_audioclk_data = { }; static const struct audioclk_data g12a_audioclk_data = { - .regmap_clks = axg_clk_regmaps, - .regmap_clk_num = ARRAY_SIZE(axg_clk_regmaps), + .regmap_clks = g12a_clk_regmaps, + .regmap_clk_num = ARRAY_SIZE(g12a_clk_regmaps), .hw_onecell_data = &g12a_audio_hw_onecell_data, .reset_offset = AUDIO_SW_RESET, .reset_num = 26, From 4fd433fd45514adc68aebf71a89a66590fdc792d Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Wed, 29 Jul 2020 17:43:59 +0200 Subject: [PATCH 3/5] clk: meson: axg-audio: fix g12a tdmout sclk inverter Fix the tdmout inverter of the g12a and following SoC families. This inverter is special and needs two bits to be the inverse of each other for the inverter to operate properly. Fixes: 075001385c66 ("clk: meson: axg-audio: add g12a support") Signed-off-by: Jerome Brunet Link: https://lore.kernel.org/r/20200729154359.1983085-4-jbrunet@baylibre.com --- drivers/clk/meson/axg-audio.c | 85 ++++++++++++++++++++++++----------- 1 file changed, 60 insertions(+), 25 deletions(-) diff --git a/drivers/clk/meson/axg-audio.c b/drivers/clk/meson/axg-audio.c index 9918cb375de3..7c8d02164443 100644 --- a/drivers/clk/meson/axg-audio.c +++ b/drivers/clk/meson/axg-audio.c @@ -147,6 +147,29 @@ }, \ } +#define AUD_SCLK_WS(_name, _reg, _width, _shift_ph, _shift_ws, _pname, \ + _iflags) { \ + .data = &(struct meson_sclk_ws_inv_data) { \ + .ph = { \ + .reg_off = (_reg), \ + .shift = (_shift_ph), \ + .width = (_width), \ + }, \ + .ws = { \ + .reg_off = (_reg), \ + .shift = (_shift_ws), \ + .width = (_width), \ + }, \ + }, \ + .hw.init = &(struct clk_init_data) { \ + .name = "aud_"#_name, \ + .ops = &meson_clk_phase_ops, \ + .parent_names = (const char *[]){ #_pname }, \ + .num_parents = 1, \ + .flags = (_iflags), \ + }, \ +} + /* Audio Master Clocks */ static const struct clk_parent_data mst_mux_parent_data[] = { { .fw_name = "mst_in0", }, @@ -254,6 +277,10 @@ static const struct clk_parent_data tdm_lrclk_parent_data[] = { AUD_PHASE(tdm##_name##_sclk, _reg, 1, 29, \ aud_tdm##_name##_sclk_post_en, \ CLK_DUTY_CYCLE_PARENT | CLK_SET_RATE_PARENT) +#define AUD_TDM_SCLK_WS(_name, _reg) \ + AUD_SCLK_WS(tdm##_name##_sclk, _reg, 1, 29, 28, \ + aud_tdm##_name##_sclk_post_en, \ + CLK_DUTY_CYCLE_PARENT | CLK_SET_RATE_PARENT) #define AUD_TDM_LRLCK(_name, _reg) \ AUD_MUX(tdm##_name##_lrclk, _reg, 0xf, 20, \ @@ -499,12 +526,6 @@ static struct clk_regmap tdmin_c_sclk = AUD_TDM_SCLK(in_c, AUDIO_CLK_TDMIN_C_CTRL); static struct clk_regmap tdmin_lb_sclk = AUD_TDM_SCLK(in_lb, AUDIO_CLK_TDMIN_LB_CTRL); -static struct clk_regmap tdmout_a_sclk = - AUD_TDM_SCLK(out_a, AUDIO_CLK_TDMOUT_A_CTRL); -static struct clk_regmap tdmout_b_sclk = - AUD_TDM_SCLK(out_b, AUDIO_CLK_TDMOUT_B_CTRL); -static struct clk_regmap tdmout_c_sclk = - AUD_TDM_SCLK(out_c, AUDIO_CLK_TDMOUT_C_CTRL); static struct clk_regmap tdmin_a_lrclk = AUD_TDM_LRLCK(in_a, AUDIO_CLK_TDMIN_A_CTRL); @@ -521,6 +542,14 @@ static struct clk_regmap tdmout_b_lrclk = static struct clk_regmap tdmout_c_lrclk = AUD_TDM_LRLCK(out_c, AUDIO_CLK_TDMOUT_C_CTRL); +/* AXG Clocks */ +static struct clk_regmap axg_tdmout_a_sclk = + AUD_TDM_SCLK(out_a, AUDIO_CLK_TDMOUT_A_CTRL); +static struct clk_regmap axg_tdmout_b_sclk = + AUD_TDM_SCLK(out_b, AUDIO_CLK_TDMOUT_B_CTRL); +static struct clk_regmap axg_tdmout_c_sclk = + AUD_TDM_SCLK(out_c, AUDIO_CLK_TDMOUT_C_CTRL); + /* AXG/G12A Clocks */ static struct clk_hw axg_aud_top = { .init = &(struct clk_init_data) { @@ -591,7 +620,13 @@ static struct clk_regmap g12a_tdm_sclk_pad_1 = AUD_TDM_PAD_CTRL( static struct clk_regmap g12a_tdm_sclk_pad_2 = AUD_TDM_PAD_CTRL( sclk_pad_2, AUDIO_MST_PAD_CTRL1, 8, sclk_pad_ctrl_parent_data); -/* G12a/SM1 clocks */ +static struct clk_regmap g12a_tdmout_a_sclk = + AUD_TDM_SCLK_WS(out_a, AUDIO_CLK_TDMOUT_A_CTRL); +static struct clk_regmap g12a_tdmout_b_sclk = + AUD_TDM_SCLK_WS(out_b, AUDIO_CLK_TDMOUT_B_CTRL); +static struct clk_regmap g12a_tdmout_c_sclk = + AUD_TDM_SCLK_WS(out_c, AUDIO_CLK_TDMOUT_C_CTRL); + static struct clk_regmap toram = AUD_PCLK_GATE(toram, AUDIO_CLK_GATE_EN, 20); static struct clk_regmap spdifout_b = @@ -889,9 +924,9 @@ static struct clk_hw_onecell_data axg_audio_hw_onecell_data = { [AUD_CLKID_TDMIN_B_SCLK] = &tdmin_b_sclk.hw, [AUD_CLKID_TDMIN_C_SCLK] = &tdmin_c_sclk.hw, [AUD_CLKID_TDMIN_LB_SCLK] = &tdmin_lb_sclk.hw, - [AUD_CLKID_TDMOUT_A_SCLK] = &tdmout_a_sclk.hw, - [AUD_CLKID_TDMOUT_B_SCLK] = &tdmout_b_sclk.hw, - [AUD_CLKID_TDMOUT_C_SCLK] = &tdmout_c_sclk.hw, + [AUD_CLKID_TDMOUT_A_SCLK] = &axg_tdmout_a_sclk.hw, + [AUD_CLKID_TDMOUT_B_SCLK] = &axg_tdmout_b_sclk.hw, + [AUD_CLKID_TDMOUT_C_SCLK] = &axg_tdmout_c_sclk.hw, [AUD_CLKID_TDMIN_A_LRCLK] = &tdmin_a_lrclk.hw, [AUD_CLKID_TDMIN_B_LRCLK] = &tdmin_b_lrclk.hw, [AUD_CLKID_TDMIN_C_LRCLK] = &tdmin_c_lrclk.hw, @@ -1026,9 +1061,9 @@ static struct clk_hw_onecell_data g12a_audio_hw_onecell_data = { [AUD_CLKID_TDMIN_B_SCLK] = &tdmin_b_sclk.hw, [AUD_CLKID_TDMIN_C_SCLK] = &tdmin_c_sclk.hw, [AUD_CLKID_TDMIN_LB_SCLK] = &tdmin_lb_sclk.hw, - [AUD_CLKID_TDMOUT_A_SCLK] = &tdmout_a_sclk.hw, - [AUD_CLKID_TDMOUT_B_SCLK] = &tdmout_b_sclk.hw, - [AUD_CLKID_TDMOUT_C_SCLK] = &tdmout_c_sclk.hw, + [AUD_CLKID_TDMOUT_A_SCLK] = &g12a_tdmout_a_sclk.hw, + [AUD_CLKID_TDMOUT_B_SCLK] = &g12a_tdmout_b_sclk.hw, + [AUD_CLKID_TDMOUT_C_SCLK] = &g12a_tdmout_c_sclk.hw, [AUD_CLKID_TDMIN_A_LRCLK] = &tdmin_a_lrclk.hw, [AUD_CLKID_TDMIN_B_LRCLK] = &tdmin_b_lrclk.hw, [AUD_CLKID_TDMIN_C_LRCLK] = &tdmin_c_lrclk.hw, @@ -1170,9 +1205,9 @@ static struct clk_hw_onecell_data sm1_audio_hw_onecell_data = { [AUD_CLKID_TDMIN_B_SCLK] = &tdmin_b_sclk.hw, [AUD_CLKID_TDMIN_C_SCLK] = &tdmin_c_sclk.hw, [AUD_CLKID_TDMIN_LB_SCLK] = &tdmin_lb_sclk.hw, - [AUD_CLKID_TDMOUT_A_SCLK] = &tdmout_a_sclk.hw, - [AUD_CLKID_TDMOUT_B_SCLK] = &tdmout_b_sclk.hw, - [AUD_CLKID_TDMOUT_C_SCLK] = &tdmout_c_sclk.hw, + [AUD_CLKID_TDMOUT_A_SCLK] = &g12a_tdmout_a_sclk.hw, + [AUD_CLKID_TDMOUT_B_SCLK] = &g12a_tdmout_b_sclk.hw, + [AUD_CLKID_TDMOUT_C_SCLK] = &g12a_tdmout_c_sclk.hw, [AUD_CLKID_TDMIN_A_LRCLK] = &tdmin_a_lrclk.hw, [AUD_CLKID_TDMIN_B_LRCLK] = &tdmin_b_lrclk.hw, [AUD_CLKID_TDMIN_C_LRCLK] = &tdmin_c_lrclk.hw, @@ -1322,9 +1357,9 @@ static struct clk_regmap *const axg_clk_regmaps[] = { &tdmin_b_sclk, &tdmin_c_sclk, &tdmin_lb_sclk, - &tdmout_a_sclk, - &tdmout_b_sclk, - &tdmout_c_sclk, + &axg_tdmout_a_sclk, + &axg_tdmout_b_sclk, + &axg_tdmout_c_sclk, &tdmin_a_lrclk, &tdmin_b_lrclk, &tdmin_c_lrclk, @@ -1447,9 +1482,9 @@ static struct clk_regmap *const g12a_clk_regmaps[] = { &tdmin_b_sclk, &tdmin_c_sclk, &tdmin_lb_sclk, - &tdmout_a_sclk, - &tdmout_b_sclk, - &tdmout_c_sclk, + &g12a_tdmout_a_sclk, + &g12a_tdmout_b_sclk, + &g12a_tdmout_c_sclk, &tdmin_a_lrclk, &tdmin_b_lrclk, &tdmin_c_lrclk, @@ -1584,9 +1619,9 @@ static struct clk_regmap *const sm1_clk_regmaps[] = { &tdmin_b_sclk, &tdmin_c_sclk, &tdmin_lb_sclk, - &tdmout_a_sclk, - &tdmout_b_sclk, - &tdmout_c_sclk, + &g12a_tdmout_a_sclk, + &g12a_tdmout_b_sclk, + &g12a_tdmout_c_sclk, &tdmin_a_lrclk, &tdmin_b_lrclk, &tdmin_c_lrclk, From 2c4e80e06790cb49ad2603855d30c5aac2209c47 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Fri, 28 Aug 2020 17:52:05 +0200 Subject: [PATCH 4/5] clk: meson: g12a: mark fclk_div2 as critical On Amlogic Meson G12b platform, similar to fclk_div3, the fclk_div2 seems to be necessary for the system to operate correctly as well. Typically, the clock also gets chosen by the eMMC peripheral. This probably masked the problem so far. However, when booting from a SD card the clock seems to get disabled which leads to a system freeze. Let's mark this clock as critical, fixing boot from SD card on G12b platforms. Fixes: 085a4ea93d54 ("clk: meson: g12a: add peripheral clock controller") Signed-off-by: Stefan Agner Signed-off-by: Jerome Brunet Tested-by: Anand Moon Cc: Marek Szyprowski Link: https://lore.kernel.org/r/577e0129e8ee93972d92f13187ff4e4286182f67.1598629915.git.stefan@agner.ch --- drivers/clk/meson/g12a.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c index 9803d44bb157..b814d44917a5 100644 --- a/drivers/clk/meson/g12a.c +++ b/drivers/clk/meson/g12a.c @@ -298,6 +298,17 @@ static struct clk_regmap g12a_fclk_div2 = { &g12a_fclk_div2_div.hw }, .num_parents = 1, + /* + * Similar to fclk_div3, it seems that this clock is used by + * the resident firmware and is required by the platform to + * operate correctly. + * Until the following condition are met, we need this clock to + * be marked as critical: + * a) Mark the clock used by a firmware resource, if possible + * b) CCF has a clock hand-off mechanism to make the sure the + * clock stays on until the proper driver comes along + */ + .flags = CLK_IS_CRITICAL, }, }; From 7b5c5720a3689c2c16968ee276b7c47edb64ce0f Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Fri, 28 Aug 2020 17:47:35 +0200 Subject: [PATCH 5/5] clk: meson: make shipped controller configurable Add the necessary bits so unnecessary amlogic clock controllers can be compiled out. This allows to save a few kB when necessary. Signed-off-by: Jerome Brunet Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/20200828154735.435374-1-jbrunet@baylibre.com --- drivers/clk/meson/Kconfig | 26 +++++++++++++++++--------- 1 file changed, 17 insertions(+), 9 deletions(-) diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index dabeb435d067..034da203e8e0 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -1,4 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only +menu "Clock support for Amlogic platforms" + depends on ARCH_MESON || COMPILE_TEST + config COMMON_CLK_MESON_REGMAP tristate select REGMAP @@ -41,8 +44,9 @@ config COMMON_CLK_MESON_CPU_DYNDIV select COMMON_CLK_MESON_REGMAP config COMMON_CLK_MESON8B - bool - depends on ARCH_MESON + bool "Meson8 SoC Clock controller support" + depends on ARM + default y select COMMON_CLK_MESON_REGMAP select COMMON_CLK_MESON_MPLL select COMMON_CLK_MESON_PLL @@ -54,8 +58,9 @@ config COMMON_CLK_MESON8B want peripherals and CPU frequency scaling to work. config COMMON_CLK_GXBB - bool - depends on ARCH_MESON + bool "GXBB and GXL SoC clock controllers support" + depends on ARM64 + default y select COMMON_CLK_MESON_REGMAP select COMMON_CLK_MESON_DUALDIV select COMMON_CLK_MESON_VID_PLL_DIV @@ -69,8 +74,9 @@ config COMMON_CLK_GXBB Say Y if you want peripherals and CPU frequency scaling to work. config COMMON_CLK_AXG - bool - depends on ARCH_MESON + bool "AXG SoC clock controllers support" + depends on ARM64 + default y select COMMON_CLK_MESON_REGMAP select COMMON_CLK_MESON_DUALDIV select COMMON_CLK_MESON_MPLL @@ -84,7 +90,7 @@ config COMMON_CLK_AXG config COMMON_CLK_AXG_AUDIO tristate "Meson AXG Audio Clock Controller Driver" - depends on ARCH_MESON + depends on ARM64 select COMMON_CLK_MESON_REGMAP select COMMON_CLK_MESON_PHASE select COMMON_CLK_MESON_SCLK_DIV @@ -94,8 +100,9 @@ config COMMON_CLK_AXG_AUDIO aka axg, Say Y if you want audio subsystem to work. config COMMON_CLK_G12A - bool - depends on ARCH_MESON + bool "G12 and SM1 SoC clock controllers support" + depends on ARM64 + default y select COMMON_CLK_MESON_REGMAP select COMMON_CLK_MESON_DUALDIV select COMMON_CLK_MESON_MPLL @@ -107,3 +114,4 @@ config COMMON_CLK_G12A help Support for the clock controller on Amlogic S905D2, S905X2 and S905Y2 devices, aka g12a. Say Y if you want peripherals to work. +endmenu