dlan17/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

Browse Source 
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (47 commits)
  OMAP clock: use debugfs_remove_recursive() for rewinding
  OMAP2/3/4 core: create omap_device layer
  OMAP: omap_hwmod: call omap_hwmod init at boot; create interconnects
  OMAP2/3/4: create omap_hwmod layer
  OMAP2/3 board-*.c files: read bootloader configuration earlier
  OMAP2/3/4 PRCM: add module IDLEST wait code
  OMAP2/3 PM: create the OMAP PM interface and add a default OMAP PM no-op layer
  OMAP3 clock: remove superfluous calls to omap2_init_clk_clkdm
  OMAP clock: associate MPU clocks with the mpu_clkdm
  OMAP3 clock: Fixed processing of bootarg 'mpurate'
  OMAP: SDRC: Add several new register definitions
  OMAP: powerdomain: Fix overflow when doing powerdomain deps lookups.
  OMAP: PM: Added suspend target state control to debugfs for OMAP3
  OMAP: PM debug: Add PRCM register dump support
  OMAP: PM debug: make powerdomains use PM-debug counters
  OMAP: PM: Add pm-debug counters
  OMAP: PM: Add closures to clkdm_for_each and pwrdm_for_each.
  OMAP: PM: Hook into PM counters
  OMAP: PM counter infrastructure.
  OMAP3: PM: fix lockdep warning caused by omap3_pm_init
  ...
This commit is contained in:
Linus Torvalds
2009-09-18 09:19:26 -07:00
parent 5ce0028987 1f685b36db
commit 73c583e4e2
103 changed files with 7776 additions and 718 deletions
Download Patch File Download Diff File Expand all files Collapse all files
arch/arm/configs/n8x0_defconfig
+1104
View File
File diff suppressed because it is too large Load Diff
arch/arm/configs/omap3_beagle_defconfig
+32 -9
View File
@@ -128,6 +128,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
CONFIG_FREEZER=y
#
# System Type
@@ -236,6 +237,7 @@ CONFIG_ARM_THUMB=y
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_HAS_TLS_REG=y
# CONFIG_OUTER_CACHE is not set
CONFIG_COMMON_CLKDEV=y
#
# Bus support
@@ -317,7 +319,12 @@ CONFIG_BINFMT_MISC=y
#
# Power management options
#
# CONFIG_PM is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_APM_EMULATION is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
@@ -713,6 +720,7 @@ CONFIG_GPIOLIB=y
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TWL4030=y
#
# PCI GPIO expanders:
@@ -741,6 +749,7 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
CONFIG_TWL4030_CORE=y
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
@@ -787,7 +796,7 @@ CONFIG_DUMMY_CONSOLE=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
@@ -798,7 +807,8 @@ CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_SUSPEND=y
CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
@@ -806,6 +816,8 @@ CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
@@ -818,10 +830,10 @@ CONFIG_USB_MUSB_SOC=y
#
# OMAP 343x high speed USB support
#
CONFIG_USB_MUSB_HOST=y
# CONFIG_USB_MUSB_HOST is not set
# CONFIG_USB_MUSB_PERIPHERAL is not set
# CONFIG_USB_MUSB_OTG is not set
# CONFIG_USB_GADGET_MUSB_HDRC is not set
CONFIG_USB_MUSB_OTG=y
CONFIG_USB_GADGET_MUSB_HDRC=y
CONFIG_USB_MUSB_HDRC_HCD=y
# CONFIG_MUSB_PIO_ONLY is not set
CONFIG_USB_INVENTRA_DMA=y
@@ -887,8 +899,8 @@ CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA25X is not set
CONFIG_USB_GADGET_M66592=y
CONFIG_USB_M66592=y
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
@@ -906,6 +918,15 @@ CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_ISP1301_OMAP is not set
CONFIG_TWL4030_USB=y
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
@@ -923,6 +944,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_OMAP is not set
CONFIG_MMC_OMAP_HS=y
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
@@ -981,10 +1003,11 @@ CONFIG_RTC_INTF_DEV=y
#
# Voltage and Current regulators
#
# CONFIG_REGULATOR is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
CONFIG_REGULATOR_TWL4030=y
# CONFIG_UIO is not set
#
arch/arm/configs/omap_3430sdp_defconfig
+10 -10
View File
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29-rc8
# Fri Mar 13 14:17:01 2009
# Linux kernel version: 2.6.30-omap1
# Tue Jun 23 10:36:45 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -197,9 +197,9 @@ CONFIG_OMAP_MCBSP=y
CONFIG_OMAP_32K_TIMER=y
CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
# CONFIG_OMAP_LL_DEBUG_UART1 is not set
CONFIG_OMAP_LL_DEBUG_UART1=y
# CONFIG_OMAP_LL_DEBUG_UART2 is not set
CONFIG_OMAP_LL_DEBUG_UART3=y
# CONFIG_OMAP_LL_DEBUG_UART3 is not set
CONFIG_OMAP_SERIAL_WAKE=y
CONFIG_ARCH_OMAP34XX=y
CONFIG_ARCH_OMAP3430=y
@@ -207,10 +207,10 @@ CONFIG_ARCH_OMAP3430=y
#
# OMAP Board Type
#
CONFIG_MACH_OMAP3_BEAGLE=y
CONFIG_MACH_OMAP_LDP=y
CONFIG_MACH_OVERO=y
CONFIG_MACH_OMAP3_PANDORA=y
# CONFIG_MACH_OMAP3_BEAGLE is not set
# CONFIG_MACH_OMAP_LDP is not set
# CONFIG_MACH_OVERO is not set
# CONFIG_MACH_OMAP3_PANDORA is not set
CONFIG_MACH_OMAP_3430SDP=y
#
@@ -950,7 +950,7 @@ CONFIG_SPI_OMAP24XX=y
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
#
@@ -1370,7 +1370,7 @@ CONFIG_SND_OMAP_SOC=y
CONFIG_SND_OMAP_SOC_MCBSP=y
# CONFIG_SND_OMAP_SOC_OVERO is not set
CONFIG_SND_OMAP_SOC_SDP3430=y
CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
# CONFIG_SND_OMAP_SOC_OMAP3_PANDORA is not set
CONFIG_SND_SOC_I2C_AND_SPI=y
# CONFIG_SND_SOC_ALL_CODECS is not set
CONFIG_SND_SOC_TWL4030=y
arch/arm/configs/omap_zoom2_defconfig
+408 -76
View File
File diff suppressed because it is too large Load Diff
arch/arm/configs/rx51_defconfig
+1
View File
@@ -1006,6 +1006,7 @@ CONFIG_WATCHDOG=y
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_OMAP_WATCHDOG=m
CONFIG_TWL4030_WATCHDOG=m
#
# USB-based Watchdog Cards
arch/arm/mach-omap1/board-ams-delta.c
+38 -5
View File
@@ -15,8 +15,11 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <asm/serial.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -162,10 +165,6 @@ static struct omap_lcd_config ams_delta_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_uart_config ams_delta_uart_config __initdata = {
.enabled_uarts = 1,
};
static struct omap_usb_config ams_delta_usb_config __initdata = {
.register_host = 1,
.hmc_mode = 16,
@@ -174,7 +173,6 @@ static struct omap_usb_config ams_delta_usb_config __initdata = {
static struct omap_board_config_kernel ams_delta_config[] = {
{ OMAP_TAG_LCD, &ams_delta_lcd_config },
{ OMAP_TAG_UART, &ams_delta_uart_config },
};
static struct resource ams_delta_kp_resources[] = {
@@ -235,6 +233,41 @@ static void __init ams_delta_init(void)
platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
}
static struct plat_serial8250_port ams_delta_modem_ports[] = {
{
.membase = (void *) AMS_DELTA_MODEM_VIRT,
.mapbase = AMS_DELTA_MODEM_PHYS,
.irq = -EINVAL, /* changed later */
.flags = UPF_BOOT_AUTOCONF,
.irqflags = IRQF_TRIGGER_RISING,
.iotype = UPIO_MEM,
.regshift = 1,
.uartclk = BASE_BAUD * 16,
},
{ },
};
static struct platform_device ams_delta_modem_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM1,
.dev = {
.platform_data = ams_delta_modem_ports,
},
};
static int __init ams_delta_modem_init(void)
{
omap_cfg_reg(M14_1510_GPIO2);
ams_delta_modem_ports[0].irq = gpio_to_irq(2);
ams_delta_latch2_write(
AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC,
AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC);
return platform_device_register(&ams_delta_modem_device);
}
arch_initcall(ams_delta_modem_init);
static void __init ams_delta_map_io(void)
{
omap1_map_common_io();
arch/arm/mach-omap1/board-fsample.c
-5
View File
@@ -240,16 +240,11 @@ static int nand_dev_ready(struct omap_nand_platform_data *data)
return gpio_get_value(P2_NAND_RB_GPIO_PIN);
}
static struct omap_uart_config fsample_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1)),
};
static struct omap_lcd_config fsample_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel fsample_config[] = {
{ OMAP_TAG_UART, &fsample_uart_config },
{ OMAP_TAG_LCD, &fsample_lcd_config },
};
arch/arm/mach-omap1/board-generic.c
-5
View File
@@ -57,12 +57,7 @@ static struct omap_usb_config generic1610_usb_config __initdata = {
};
#endif
static struct omap_uart_config generic_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_board_config_kernel generic_config[] __initdata = {
{ OMAP_TAG_UART, &generic_uart_config },
};
static void __init omap_generic_init(void)
arch/arm/mach-omap1/board-h2.c
-5
View File
@@ -360,16 +360,11 @@ static struct omap_usb_config h2_usb_config __initdata = {
.pins[1] = 3,
};
static struct omap_uart_config h2_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_lcd_config h2_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel h2_config[] __initdata = {
{ OMAP_TAG_UART, &h2_uart_config },
{ OMAP_TAG_LCD, &h2_lcd_config },
};
arch/arm/mach-omap1/board-h3.c
-5
View File
@@ -313,16 +313,11 @@ static struct omap_usb_config h3_usb_config __initdata = {
.pins[1] = 3,
};
static struct omap_uart_config h3_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_lcd_config h3_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel h3_config[] __initdata = {
{ OMAP_TAG_UART, &h3_uart_config },
{ OMAP_TAG_LCD, &h3_lcd_config },
};
arch/arm/mach-omap1/board-innovator.c
-5
View File
@@ -368,13 +368,8 @@ static inline void innovator_mmc_init(void)
}
#endif
static struct omap_uart_config innovator_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_board_config_kernel innovator_config[] = {
{ OMAP_TAG_LCD, NULL },
{ OMAP_TAG_UART, &innovator_uart_config },
};
static void __init innovator_init(void)
arch/arm/mach-omap1/board-osk.c
-5
View File
@@ -293,10 +293,6 @@ static struct omap_usb_config osk_usb_config __initdata = {
.pins[0] = 2,
};
static struct omap_uart_config osk_uart_config __initdata = {
.enabled_uarts = (1 << 0),
};
#ifdef CONFIG_OMAP_OSK_MISTRAL
static struct omap_lcd_config osk_lcd_config __initdata = {
.ctrl_name = "internal",
@@ -304,7 +300,6 @@ static struct omap_lcd_config osk_lcd_config __initdata = {
#endif
static struct omap_board_config_kernel osk_config[] __initdata = {
{ OMAP_TAG_UART, &osk_uart_config },
#ifdef CONFIG_OMAP_OSK_MISTRAL
{ OMAP_TAG_LCD, &osk_lcd_config },
#endif
arch/arm/mach-omap1/board-palmte.c
-5
View File
@@ -212,10 +212,6 @@ static struct omap_lcd_config palmte_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_uart_config palmte_uart_config __initdata = {
.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
};
#ifdef CONFIG_APM
/*
* Values measured in 10 minute intervals averaged over 10 samples.
@@ -302,7 +298,6 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery)
static struct omap_board_config_kernel palmte_config[] __initdata = {
{ OMAP_TAG_LCD, &palmte_lcd_config },
{ OMAP_TAG_UART, &palmte_uart_config },
};
static struct spi_board_info palmte_spi_info[] __initdata = {
arch/arm/mach-omap1/board-palmtt.c
-5
View File
@@ -274,13 +274,8 @@ static struct omap_lcd_config palmtt_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_uart_config palmtt_uart_config __initdata = {
.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
};
static struct omap_board_config_kernel palmtt_config[] __initdata = {
{ OMAP_TAG_LCD, &palmtt_lcd_config },
{ OMAP_TAG_UART, &palmtt_uart_config },
};
static void __init omap_mpu_wdt_mode(int mode) {
arch/arm/mach-omap1/board-palmz71.c
-5
View File
@@ -244,13 +244,8 @@ static struct omap_lcd_config palmz71_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_uart_config palmz71_uart_config __initdata = {
.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
};
static struct omap_board_config_kernel palmz71_config[] __initdata = {
{OMAP_TAG_LCD, &palmz71_lcd_config},
{OMAP_TAG_UART, &palmz71_uart_config},
};
static irqreturn_t
arch/arm/mach-omap1/board-perseus2.c
-5
View File
@@ -208,16 +208,11 @@ static int nand_dev_ready(struct omap_nand_platform_data *data)
return gpio_get_value(P2_NAND_RB_GPIO_PIN);
}
static struct omap_uart_config perseus2_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1)),
};
static struct omap_lcd_config perseus2_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel perseus2_config[] __initdata = {
{ OMAP_TAG_UART, &perseus2_uart_config },
{ OMAP_TAG_LCD, &perseus2_lcd_config },
};
arch/arm/mach-omap1/board-sx1.c
-5
View File
@@ -369,13 +369,8 @@ static struct platform_device *sx1_devices[] __initdata = {
};
/*-----------------------------------------*/
static struct omap_uart_config sx1_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_board_config_kernel sx1_config[] __initdata = {
{ OMAP_TAG_LCD, &sx1_lcd_config },
{ OMAP_TAG_UART, &sx1_uart_config },
};
/*-----------------------------------------*/
arch/arm/mach-omap1/board-voiceblue.c
-5
View File
@@ -140,12 +140,7 @@ static struct omap_usb_config voiceblue_usb_config __initdata = {
.pins[2] = 6,
};
static struct omap_uart_config voiceblue_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_board_config_kernel voiceblue_config[] = {
{ OMAP_TAG_UART, &voiceblue_uart_config },
};
static void __init voiceblue_init_irq(void)
arch/arm/mach-omap1/devices.c
+1 -1
View File
@@ -71,7 +71,7 @@ static inline void omap_init_rtc(void) {}
# define INT_DSP_MAILBOX1 INT_1610_DSP_MAILBOX1
#endif
#define OMAP1_MBOX_BASE IO_ADDRESS(OMAP16XX_MAILBOX_BASE)
#define OMAP1_MBOX_BASE OMAP1_IO_ADDRESS(OMAP16XX_MAILBOX_BASE)
static struct resource mbox_resources[] = {
{
arch/arm/mach-omap1/io.c
+3 -3
View File
@@ -29,9 +29,9 @@ extern void omapfb_reserve_sdram(void);
*/
static struct map_desc omap_io_desc[] __initdata = {
{
.virtual = IO_VIRT,
.pfn = __phys_to_pfn(IO_PHYS),
.length = IO_SIZE,
.virtual = OMAP1_IO_VIRT,
.pfn = __phys_to_pfn(OMAP1_IO_PHYS),
.length = OMAP1_IO_SIZE,
.type = MT_DEVICE
}
};
arch/arm/mach-omap1/pm.h
+2 -2
View File
@@ -39,11 +39,11 @@
* Register and offset definitions to be used in PM assembler code
* ----------------------------------------------------------------------------
*/
#define CLKGEN_REG_ASM_BASE IO_ADDRESS(0xfffece00)
#define CLKGEN_REG_ASM_BASE OMAP1_IO_ADDRESS(0xfffece00)
#define ARM_IDLECT1_ASM_OFFSET 0x04
#define ARM_IDLECT2_ASM_OFFSET 0x08
#define TCMIF_ASM_BASE IO_ADDRESS(0xfffecc00)
#define TCMIF_ASM_BASE OMAP1_IO_ADDRESS(0xfffecc00)
#define EMIFS_CONFIG_ASM_OFFSET 0x0c
#define EMIFF_SDRAM_CONFIG_ASM_OFFSET 0x20
arch/arm/mach-omap1/serial.c
+3 -14
View File
@@ -64,7 +64,7 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p)
static struct plat_serial8250_port serial_platform_data[] = {
{
.membase = IO_ADDRESS(OMAP_UART1_BASE),
.membase = OMAP1_IO_ADDRESS(OMAP_UART1_BASE),
.mapbase = OMAP_UART1_BASE,
.irq = INT_UART1,
.flags = UPF_BOOT_AUTOCONF,
@@ -73,7 +73,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
.uartclk = OMAP16XX_BASE_BAUD * 16,
},
{
.membase = IO_ADDRESS(OMAP_UART2_BASE),
.membase = OMAP1_IO_ADDRESS(OMAP_UART2_BASE),
.mapbase = OMAP_UART2_BASE,
.irq = INT_UART2,
.flags = UPF_BOOT_AUTOCONF,
@@ -82,7 +82,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
.uartclk = OMAP16XX_BASE_BAUD * 16,
},
{
.membase = IO_ADDRESS(OMAP_UART3_BASE),
.membase = OMAP1_IO_ADDRESS(OMAP_UART3_BASE),
.mapbase = OMAP_UART3_BASE,
.irq = INT_UART3,
.flags = UPF_BOOT_AUTOCONF,
@@ -109,7 +109,6 @@ static struct platform_device serial_device = {
void __init omap_serial_init(void)
{
int i;
const struct omap_uart_config *info;
if (cpu_is_omap730()) {
serial_platform_data[0].regshift = 0;
@@ -131,19 +130,9 @@ void __init omap_serial_init(void)
serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16;
}
info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
if (info == NULL)
return;
for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
unsigned char reg;
if (!((1 << i) & info->enabled_uarts)) {
serial_platform_data[i].membase = NULL;
serial_platform_data[i].mapbase = 0;
continue;
}
switch (i) {
case 0:
uart1_ck = clk_get(NULL, "uart1_ck");
arch/arm/mach-omap1/sram.S
+6 -6
View File
@@ -21,13 +21,13 @@
ENTRY(omap1_sram_reprogram_clock)
stmfd sp!, {r0 - r12, lr} @ save registers on stack
mov r2, #IO_ADDRESS(DPLL_CTL) & 0xff000000
orr r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x00ff0000
orr r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x0000ff00
mov r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0xff000000
orr r2, r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0x00ff0000
orr r2, r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0x0000ff00
mov r3, #IO_ADDRESS(ARM_CKCTL) & 0xff000000
orr r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x00ff0000
orr r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x0000ff00
mov r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0xff000000
orr r3, r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0x00ff0000
orr r3, r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0x0000ff00
tst r0, #1 << 4 @ want lock mode?
beq newck @ nope
arch/arm/mach-omap1/time.c
+2 -2
View File
@@ -62,8 +62,8 @@ typedef struct {
u32 read_tim; /* READ_TIM, R */
} omap_mpu_timer_regs_t;
#define omap_mpu_timer_base(n) \
((volatile omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE + \
#define omap_mpu_timer_base(n) \
((volatile omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE + \
(n)*OMAP_MPU_TIMER_OFFSET))
static inline unsigned long omap_mpu_timer_read(int nr)
arch/arm/mach-omap2/Kconfig
+9
View File
@@ -31,6 +31,11 @@ config MACH_OMAP_GENERIC
bool "Generic OMAP board"
depends on ARCH_OMAP2 && ARCH_OMAP24XX
config MACH_OMAP2_TUSB6010
bool
depends on ARCH_OMAP2 && ARCH_OMAP2420
default y if MACH_NOKIA_N8X0
config MACH_OMAP_H4
bool "OMAP 2420 H4 board"
depends on ARCH_OMAP2 && ARCH_OMAP24XX
@@ -68,6 +73,10 @@ config MACH_OMAP_3430SDP
bool "OMAP 3430 SDP board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
config MACH_NOKIA_N8X0
bool "Nokia N800/N810"
depends on ARCH_OMAP2420
config MACH_NOKIA_RX51
bool "Nokia RX-51 board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
arch/arm/mach-omap2/Makefile
+8 -2
View File
@@ -5,7 +5,7 @@
# Common support
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
omap-2-3-common = irq.o sdrc.o
omap-2-3-common = irq.o sdrc.o omap_hwmod.o
prcm-common = prcm.o powerdomain.o
clock-common = clock.o clockdomain.o
@@ -35,6 +35,11 @@ obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
endif
# PRCM
obj-$(CONFIG_ARCH_OMAP2) += cm.o
obj-$(CONFIG_ARCH_OMAP3) += cm.o
obj-$(CONFIG_ARCH_OMAP4) += cm4xxx.o
# Clock framework
obj-$(CONFIG_ARCH_OMAP2) += clock24xx.o
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o
@@ -62,7 +67,7 @@ obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \
mmc-twl4030.o
obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
mmc-twl4030.o
obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
board-rx51-peripherals.o \
mmc-twl4030.o
@@ -74,6 +79,7 @@ obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o
# Platform specific device init code
obj-y += usb-musb.o
obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o
obj-y += $(onenand-m) $(onenand-y)
arch/arm/mach-omap2/board-2430sdp.c
+6 -12
View File
@@ -139,23 +139,19 @@ static inline void board_smc91x_init(void)
#endif
static struct omap_board_config_kernel sdp2430_config[] = {
{OMAP_TAG_LCD, &sdp2430_lcd_config},
};
static void __init omap_2430sdp_init_irq(void)
{
omap_board_config = sdp2430_config;
omap_board_config_size = ARRAY_SIZE(sdp2430_config);
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
}
static struct omap_uart_config sdp2430_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_board_config_kernel sdp2430_config[] = {
{OMAP_TAG_UART, &sdp2430_uart_config},
{OMAP_TAG_LCD, &sdp2430_lcd_config},
};
static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
@@ -205,8 +201,6 @@ static void __init omap_2430sdp_init(void)
omap2430_i2c_init();
platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
omap_board_config = sdp2430_config;
omap_board_config_size = ARRAY_SIZE(sdp2430_config);
omap_serial_init();
twl4030_mmc_init(mmc);
usb_musb_init();
arch/arm/mach-omap2/board-3430sdp.c
+15 -14
View File
@@ -167,26 +167,23 @@ static struct platform_device *sdp3430_devices[] __initdata = {
&sdp3430_lcd_device,
};
static void __init omap_3430sdp_init_irq(void)
{
omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
omap_init_irq();
omap_gpio_init();
}
static struct omap_uart_config sdp3430_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_lcd_config sdp3430_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel sdp3430_config[] __initdata = {
{ OMAP_TAG_UART, &sdp3430_uart_config },
{ OMAP_TAG_LCD, &sdp3430_lcd_config },
};
static void __init omap_3430sdp_init_irq(void)
{
omap_board_config = sdp3430_config;
omap_board_config_size = ARRAY_SIZE(sdp3430_config);
omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
omap_init_irq();
omap_gpio_init();
}
static int sdp3430_batt_table[] = {
/* 0 C*/
30800, 29500, 28300, 27100,
@@ -478,12 +475,15 @@ static inline void board_smc91x_init(void)
#endif
static void enable_board_wakeup_source(void)
{
omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */
}
static void __init omap_3430sdp_init(void)
{
omap3430_i2c_init();
platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices));
omap_board_config = sdp3430_config;
omap_board_config_size = ARRAY_SIZE(sdp3430_config);
if (omap_rev() > OMAP3430_REV_ES1_0)
ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2;
else
@@ -495,6 +495,7 @@ static void __init omap_3430sdp_init(void)
omap_serial_init();
usb_musb_init();
board_smc91x_init();
enable_board_wakeup_source();
}
static void __init omap_3430sdp_map_io(void)
arch/arm/mach-omap2/board-4430sdp.c
+2 -3
View File
@@ -47,14 +47,13 @@ static struct omap_lcd_config sdp4430_lcd_config __initdata = {
};
static struct omap_board_config_kernel sdp4430_config[] __initdata = {
{ OMAP_TAG_UART, &sdp4430_uart_config },
{ OMAP_TAG_LCD, &sdp4430_lcd_config },
};
static void __init gic_init_irq(void)
{
gic_dist_init(0, IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
gic_dist_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
}
static void __init omap_4430sdp_init_irq(void)
arch/arm/mach-omap2/board-apollon.c
+10 -15
View File
@@ -248,18 +248,6 @@ out:
clk_put(gpmc_fck);
}
static void __init omap_apollon_init_irq(void)
{
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
apollon_init_smc91x();
}
static struct omap_uart_config apollon_uart_config __initdata = {
.enabled_uarts = (1 << 0) | (0 << 1) | (0 << 2),
};
static struct omap_usb_config apollon_usb_config __initdata = {
.register_dev = 1,
.hmc_mode = 0x14, /* 0:dev 1:host1 2:disable */
@@ -272,10 +260,19 @@ static struct omap_lcd_config apollon_lcd_config __initdata = {
};
static struct omap_board_config_kernel apollon_config[] = {
{ OMAP_TAG_UART, &apollon_uart_config },
{ OMAP_TAG_LCD, &apollon_lcd_config },
};
static void __init omap_apollon_init_irq(void)
{
omap_board_config = apollon_config;
omap_board_config_size = ARRAY_SIZE(apollon_config);
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
apollon_init_smc91x();
}
static void __init apollon_led_init(void)
{
/* LED0 - AA10 */
@@ -324,8 +321,6 @@ static void __init omap_apollon_init(void)
* if not needed.
*/
platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
omap_board_config = apollon_config;
omap_board_config_size = ARRAY_SIZE(apollon_config);
omap_serial_init();
}
arch/arm/mach-omap2/board-generic.c
+5 -10
View File
@@ -31,24 +31,19 @@
#include <mach/board.h>
#include <mach/common.h>
static struct omap_board_config_kernel generic_config[] = {
};
static void __init omap_generic_init_irq(void)
{
omap_board_config = generic_config;
omap_board_config_size = ARRAY_SIZE(generic_config);
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
}
static struct omap_uart_config generic_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_board_config_kernel generic_config[] = {
{ OMAP_TAG_UART, &generic_uart_config },
};
static void __init omap_generic_init(void)
{
omap_board_config = generic_config;
omap_board_config_size = ARRAY_SIZE(generic_config);
omap_serial_init();
}
arch/arm/mach-omap2/board-h4.c
+10 -15
View File
@@ -268,18 +268,6 @@ static void __init h4_init_flash(void)
h4_flash_resource.end = base + SZ_64M - 1;
}
static void __init omap_h4_init_irq(void)
{
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
h4_init_flash();
}
static struct omap_uart_config h4_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_lcd_config h4_lcd_config __initdata = {
.ctrl_name = "internal",
};
@@ -318,10 +306,19 @@ static struct omap_usb_config h4_usb_config __initdata = {
};
static struct omap_board_config_kernel h4_config[] = {
{ OMAP_TAG_UART, &h4_uart_config },
{ OMAP_TAG_LCD, &h4_lcd_config },
};
static void __init omap_h4_init_irq(void)
{
omap_board_config = h4_config;
omap_board_config_size = ARRAY_SIZE(h4_config);
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
h4_init_flash();
}
static struct at24_platform_data m24c01 = {
.byte_len = SZ_1K / 8,
.page_size = 16,
@@ -366,8 +363,6 @@ static void __init omap_h4_init(void)
ARRAY_SIZE(h4_i2c_board_info));
platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
omap_board_config = h4_config;
omap_board_config_size = ARRAY_SIZE(h4_config);
omap_usb_init(&h4_usb_config);
omap_serial_init();
}
arch/arm/mach-omap2/board-ldp.c
+10 -15
View File
@@ -268,18 +268,6 @@ static inline void __init ldp_init_smsc911x(void)
gpio_direction_input(eth_gpio);
}
static void __init omap_ldp_init_irq(void)
{
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
ldp_init_smsc911x();
}
static struct omap_uart_config ldp_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct platform_device ldp_lcd_device = {
.name = "ldp_lcd",
.id = -1,
@@ -290,10 +278,19 @@ static struct omap_lcd_config ldp_lcd_config __initdata = {
};
static struct omap_board_config_kernel ldp_config[] __initdata = {
{ OMAP_TAG_UART, &ldp_uart_config },
{ OMAP_TAG_LCD, &ldp_lcd_config },
};
static void __init omap_ldp_init_irq(void)
{
omap_board_config = ldp_config;
omap_board_config_size = ARRAY_SIZE(ldp_config);
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
ldp_init_smsc911x();
}
static struct twl4030_usb_data ldp_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
@@ -377,8 +374,6 @@ static void __init omap_ldp_init(void)
{
omap_i2c_init();
platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
omap_board_config = ldp_config;
omap_board_config_size = ARRAY_SIZE(ldp_config);
ts_gpio = 54;
ldp_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
spi_register_board_info(ldp_spi_board_info,
arch/arm/mach-omap2/board-n8x0.c
+150
View File
@@ -0,0 +1,150 @@
/*
* linux/arch/arm/mach-omap2/board-n8x0.c
*
* Copyright (C) 2005-2009 Nokia Corporation
* Author: Juha Yrjola <juha.yrjola@nokia.com>
*
* Modified from mach-omap2/board-generic.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/stddef.h>
#include <linux/spi/spi.h>
#include <linux/usb/musb.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/board.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/mcspi.h>
#include <mach/onenand.h>
#include <mach/serial.h>
static struct omap2_mcspi_device_config p54spi_mcspi_config = {
.turbo_mode = 0,
.single_channel = 1,
};
static struct spi_board_info n800_spi_board_info[] __initdata = {
{
.modalias = "p54spi",
.bus_num = 2,
.chip_select = 0,
.max_speed_hz = 48000000,
.controller_data = &p54spi_mcspi_config,
},
};
#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
static struct mtd_partition onenand_partitions[] = {
{
.name = "bootloader",
.offset = 0,
.size = 0x20000,
.mask_flags = MTD_WRITEABLE, /* Force read-only */
},
{
.name = "config",
.offset = MTDPART_OFS_APPEND,
.size = 0x60000,
},
{
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = 0x200000,
},
{
.name = "initfs",
.offset = MTDPART_OFS_APPEND,
.size = 0x400000,
},
{
.name = "rootfs",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
};
static struct omap_onenand_platform_data board_onenand_data = {
.cs = 0,
.gpio_irq = 26,
.parts = onenand_partitions,
.nr_parts = ARRAY_SIZE(onenand_partitions),
.flags = ONENAND_SYNC_READ,
};
static void __init n8x0_onenand_init(void)
{
gpmc_onenand_init(&board_onenand_data);
}
#else
static void __init n8x0_onenand_init(void) {}
#endif
static void __init n8x0_map_io(void)
{
omap2_set_globals_242x();
omap2_map_common_io();
}
static void __init n8x0_init_irq(void)
{
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
}
static void __init n8x0_init_machine(void)
{
/* FIXME: add n810 spi devices */
spi_register_board_info(n800_spi_board_info,
ARRAY_SIZE(n800_spi_board_info));
omap_serial_init();
n8x0_onenand_init();
}
MACHINE_START(NOKIA_N800, "Nokia N800")
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = n8x0_map_io,
.init_irq = n8x0_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap_timer,
MACHINE_END
MACHINE_START(NOKIA_N810, "Nokia N810")
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = n8x0_map_io,
.init_irq = n8x0_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap_timer,
MACHINE_END
MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = n8x0_map_io,
.init_irq = n8x0_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap_timer,
MACHINE_END
arch/arm/mach-omap2/board-omap3beagle.c
+18 -18
View File
@@ -108,10 +108,6 @@ static struct platform_device omap3beagle_nand_device = {
#include "sdram-micron-mt46h32m32lf-6.h"
static struct omap_uart_config omap3_beagle_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct twl4030_hsmmc_info mmc[] = {
{
.mmc = 1,
@@ -249,11 +245,16 @@ static struct regulator_init_data beagle_vpll2 = {
.consumer_supplies = &beagle_vdvi_supply,
};
static struct twl4030_usb_data beagle_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_platform_data beagle_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.usb = &beagle_usb_data,
.gpio = &beagle_gpio_data,
.vmmc1 = &beagle_vmmc1,
.vsim = &beagle_vsim,
@@ -280,17 +281,6 @@ static int __init omap3_beagle_i2c_init(void)
return 0;
}
static void __init omap3_beagle_init_irq(void)
{
omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap_init_irq();
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(12);
#endif
omap_gpio_init();
}
static struct gpio_led gpio_leds[] = {
{
.name = "beagleboard::usr0",
@@ -345,10 +335,22 @@ static struct platform_device keys_gpio = {
};
static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
{ OMAP_TAG_UART, &omap3_beagle_uart_config },
{ OMAP_TAG_LCD, &omap3_beagle_lcd_config },
};
static void __init omap3_beagle_init_irq(void)
{
omap_board_config = omap3_beagle_config;
omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap_init_irq();
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(12);
#endif
omap_gpio_init();
}
static struct platform_device *omap3_beagle_devices[] __initdata = {
&omap3_beagle_lcd_device,
&leds_gpio,
@@ -398,8 +400,6 @@ static void __init omap3_beagle_init(void)
omap3_beagle_i2c_init();
platform_add_devices(omap3_beagle_devices,
ARRAY_SIZE(omap3_beagle_devices));
omap_board_config = omap3_beagle_config;
omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
omap_serial_init();
omap_cfg_reg(J25_34XX_GPIO170);
arch/arm/mach-omap2/board-omap3evm.c
+6 -11
View File
@@ -92,10 +92,6 @@ static inline void __init omap3evm_init_smc911x(void)
gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ);
}
static struct omap_uart_config omap3_evm_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct twl4030_hsmmc_info mmc[] = {
{
.mmc = 1,
@@ -278,19 +274,20 @@ struct spi_board_info omap3evm_spi_board_info[] = {
},
};
static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
{ OMAP_TAG_LCD, &omap3_evm_lcd_config },
};
static void __init omap3_evm_init_irq(void)
{
omap_board_config = omap3_evm_config;
omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL);
omap_init_irq();
omap_gpio_init();
omap3evm_init_smc911x();
}
static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
{ OMAP_TAG_UART, &omap3_evm_uart_config },
{ OMAP_TAG_LCD, &omap3_evm_lcd_config },
};
static struct platform_device *omap3_evm_devices[] __initdata = {
&omap3_evm_lcd_device,
&omap3evm_smc911x_device,
@@ -301,8 +298,6 @@ static void __init omap3_evm_init(void)
omap3_evm_i2c_init();
platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices));
omap_board_config = omap3_evm_config;
omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
spi_register_board_info(omap3evm_spi_board_info,
ARRAY_SIZE(omap3evm_spi_board_info));
arch/arm/mach-omap2/board-omap3pandora.c
+10 -15
View File
@@ -213,10 +213,6 @@ static struct twl4030_hsmmc_info omap3pandora_mmc[] = {
{} /* Terminator */
};
static struct omap_uart_config omap3pandora_uart_config __initdata = {
.enabled_uarts = (1 << 2), /* UART3 */
};
static struct regulator_consumer_supply pandora_vmmc1_supply = {
.supply = "vmmc",
};
@@ -309,14 +305,6 @@ static int __init omap3pandora_i2c_init(void)
return 0;
}
static void __init omap3pandora_init_irq(void)
{
omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
static void __init omap3pandora_ads7846_init(void)
{
int gpio = OMAP3_PANDORA_TS_GPIO;
@@ -376,10 +364,19 @@ static struct omap_lcd_config omap3pandora_lcd_config __initdata = {
};
static struct omap_board_config_kernel omap3pandora_config[] __initdata = {
{ OMAP_TAG_UART, &omap3pandora_uart_config },
{ OMAP_TAG_LCD, &omap3pandora_lcd_config },
};
static void __init omap3pandora_init_irq(void)
{
omap_board_config = omap3pandora_config;
omap_board_config_size = ARRAY_SIZE(omap3pandora_config);
omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
static struct platform_device *omap3pandora_devices[] __initdata = {
&omap3pandora_lcd_device,
&pandora_leds_gpio,
@@ -391,8 +388,6 @@ static void __init omap3pandora_init(void)
omap3pandora_i2c_init();
platform_add_devices(omap3pandora_devices,
ARRAY_SIZE(omap3pandora_devices));
omap_board_config = omap3pandora_config;
omap_board_config_size = ARRAY_SIZE(omap3pandora_config);
omap_serial_init();
spi_register_board_info(omap3pandora_spi_board_info,
ARRAY_SIZE(omap3pandora_spi_board_info));
arch/arm/mach-omap2/board-overo.c
+10 -14
View File
@@ -271,9 +271,6 @@ static void __init overo_flash_init(void)
printk(KERN_ERR "Unable to register NAND device\n");
}
}
static struct omap_uart_config overo_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct twl4030_hsmmc_info mmc[] = {
{
@@ -360,14 +357,6 @@ static int __init overo_i2c_init(void)
return 0;
}
static void __init overo_init_irq(void)
{
omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
static struct platform_device overo_lcd_device = {
.name = "overo_lcd",
.id = -1,
@@ -378,10 +367,19 @@ static struct omap_lcd_config overo_lcd_config __initdata = {
};
static struct omap_board_config_kernel overo_config[] __initdata = {
{ OMAP_TAG_UART, &overo_uart_config },
{ OMAP_TAG_LCD, &overo_lcd_config },
};
static void __init overo_init_irq(void)
{
omap_board_config = overo_config;
omap_board_config_size = ARRAY_SIZE(overo_config);
omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
static struct platform_device *overo_devices[] __initdata = {
&overo_lcd_device,
};
@@ -390,8 +388,6 @@ static void __init overo_init(void)
{
overo_i2c_init();
platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
omap_board_config = overo_config;
omap_board_config_size = ARRAY_SIZE(overo_config);
omap_serial_init();
overo_flash_init();
usb_musb_init();
arch/arm/mach-omap2/board-rx51.c
+2 -7
View File
@@ -31,10 +31,6 @@
#include <mach/gpmc.h>
#include <mach/usb.h>
static struct omap_uart_config rx51_uart_config = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_lcd_config rx51_lcd_config = {
.ctrl_name = "internal",
};
@@ -52,7 +48,6 @@ static struct omap_fbmem_config rx51_fbmem2_config = {
};
static struct omap_board_config_kernel rx51_config[] = {
{ OMAP_TAG_UART, &rx51_uart_config },
{ OMAP_TAG_FBMEM, &rx51_fbmem0_config },
{ OMAP_TAG_FBMEM, &rx51_fbmem1_config },
{ OMAP_TAG_FBMEM, &rx51_fbmem2_config },
@@ -61,6 +56,8 @@ static struct omap_board_config_kernel rx51_config[] = {
static void __init rx51_init_irq(void)
{
omap_board_config = rx51_config;
omap_board_config_size = ARRAY_SIZE(rx51_config);
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
@@ -70,8 +67,6 @@ extern void __init rx51_peripherals_init(void);
static void __init rx51_init(void)
{
omap_board_config = rx51_config;
omap_board_config_size = ARRAY_SIZE(rx51_config);
omap_serial_init();
usb_musb_init();
rx51_peripherals_init();
arch/arm/mach-omap2/board-zoom-debugboard.c
+7 -4
View File
@@ -12,6 +12,7 @@
#include <linux/gpio.h>
#include <linux/serial_8250.h>
#include <linux/smsc911x.h>
#include <linux/interrupt.h>
#include <mach/gpmc.h>
@@ -84,6 +85,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
.mapbase = 0x10000000,
.irq = OMAP_GPIO_IRQ(102),
.flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
.irqflags = IRQF_SHARED | IRQF_TRIGGER_RISING,
.iotype = UPIO_MEM,
.regshift = 1,
.uartclk = QUART_CLK,
@@ -94,7 +96,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
static struct platform_device zoom2_debugboard_serial_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM1,
.id = 3,
.dev = {
.platform_data = serial_platform_data,
},
@@ -127,6 +129,7 @@ static inline void __init zoom2_init_quaduart(void)
static inline int omap_zoom2_debugboard_detect(void)
{
int debug_board_detect = 0;
int ret = 1;
debug_board_detect = ZOOM2_SMSC911X_GPIO;
@@ -138,10 +141,10 @@ static inline int omap_zoom2_debugboard_detect(void)
gpio_direction_input(debug_board_detect);
if (!gpio_get_value(debug_board_detect)) {
gpio_free(debug_board_detect);
return 0;
ret = 0;
}
return 1;
gpio_free(debug_board_detect);
return ret;
}
static struct platform_device *zoom2_devices[] __initdata = {
arch/arm/mach-omap2/board-zoom2.c
+197 -21
View File
@@ -12,36 +12,217 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/i2c/twl4030.h>
#include <linux/regulator/machine.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/common.h>
#include <mach/usb.h>
#include <mach/keypad.h>
#include "mmc-twl4030.h"
/* Zoom2 has Qwerty keyboard*/
static int zoom2_twl4030_keymap[] = {
KEY(0, 0, KEY_E),
KEY(1, 0, KEY_R),
KEY(2, 0, KEY_T),
KEY(3, 0, KEY_HOME),
KEY(6, 0, KEY_I),
KEY(7, 0, KEY_LEFTSHIFT),
KEY(0, 1, KEY_D),
KEY(1, 1, KEY_F),
KEY(2, 1, KEY_G),
KEY(3, 1, KEY_SEND),
KEY(6, 1, KEY_K),
KEY(7, 1, KEY_ENTER),
KEY(0, 2, KEY_X),
KEY(1, 2, KEY_C),
KEY(2, 2, KEY_V),
KEY(3, 2, KEY_END),
KEY(6, 2, KEY_DOT),
KEY(7, 2, KEY_CAPSLOCK),
KEY(0, 3, KEY_Z),
KEY(1, 3, KEY_KPPLUS),
KEY(2, 3, KEY_B),
KEY(3, 3, KEY_F1),
KEY(6, 3, KEY_O),
KEY(7, 3, KEY_SPACE),
KEY(0, 4, KEY_W),
KEY(1, 4, KEY_Y),
KEY(2, 4, KEY_U),
KEY(3, 4, KEY_F2),
KEY(4, 4, KEY_VOLUMEUP),
KEY(6, 4, KEY_L),
KEY(7, 4, KEY_LEFT),
KEY(0, 5, KEY_S),
KEY(1, 5, KEY_H),
KEY(2, 5, KEY_J),
KEY(3, 5, KEY_F3),
KEY(5, 5, KEY_VOLUMEDOWN),
KEY(6, 5, KEY_M),
KEY(4, 5, KEY_ENTER),
KEY(7, 5, KEY_RIGHT),
KEY(0, 6, KEY_Q),
KEY(1, 6, KEY_A),
KEY(2, 6, KEY_N),
KEY(3, 6, KEY_BACKSPACE),
KEY(6, 6, KEY_P),
KEY(7, 6, KEY_UP),
KEY(6, 7, KEY_SELECT),
KEY(7, 7, KEY_DOWN),
KEY(0, 7, KEY_PROG1), /*MACRO 1 <User defined> */
KEY(1, 7, KEY_PROG2), /*MACRO 2 <User defined> */
KEY(2, 7, KEY_PROG3), /*MACRO 3 <User defined> */
KEY(3, 7, KEY_PROG4), /*MACRO 4 <User defined> */
0
};
static struct twl4030_keypad_data zoom2_kp_twl4030_data = {
.rows = 8,
.cols = 8,
.keymap = zoom2_twl4030_keymap,
.keymapsize = ARRAY_SIZE(zoom2_twl4030_keymap),
.rep = 1,
};
static struct omap_board_config_kernel zoom2_config[] __initdata = {
};
static struct regulator_consumer_supply zoom2_vmmc1_supply = {
.supply = "vmmc",
};
static struct regulator_consumer_supply zoom2_vsim_supply = {
.supply = "vmmc_aux",
};
static struct regulator_consumer_supply zoom2_vmmc2_supply = {
.supply = "vmmc",
};
/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
static struct regulator_init_data zoom2_vmmc1 = {
.constraints = {
.min_uV = 1850000,
.max_uV = 3150000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &zoom2_vmmc1_supply,
};
/* VMMC2 for MMC2 card */
static struct regulator_init_data zoom2_vmmc2 = {
.constraints = {
.min_uV = 1850000,
.max_uV = 1850000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &zoom2_vmmc2_supply,
};
/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
static struct regulator_init_data zoom2_vsim = {
.constraints = {
.min_uV = 1800000,
.max_uV = 3000000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &zoom2_vsim_supply,
};
static struct twl4030_hsmmc_info mmc[] __initdata = {
{
.mmc = 1,
.wires = 4,
.gpio_wp = -EINVAL,
},
{
.mmc = 2,
.wires = 4,
.gpio_wp = -EINVAL,
},
{} /* Terminator */
};
static int zoom2_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
/* gpio + 0 is "mmc0_cd" (input/IRQ),
* gpio + 1 is "mmc1_cd" (input/IRQ)
*/
mmc[0].gpio_cd = gpio + 0;
mmc[1].gpio_cd = gpio + 1;
twl4030_mmc_init(mmc);
/* link regulators to MMC adapters ... we "know" the
* regulators will be set up only *after* we return.
*/
zoom2_vmmc1_supply.dev = mmc[0].dev;
zoom2_vsim_supply.dev = mmc[0].dev;
zoom2_vmmc2_supply.dev = mmc[1].dev;
return 0;
}
static int zoom2_batt_table[] = {
/* 0 C*/
30800, 29500, 28300, 27100,
26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310,
8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830,
5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170,
4040, 3910, 3790, 3670, 3550
};
static struct twl4030_bci_platform_data zoom2_bci_data = {
.battery_tmp_tbl = zoom2_batt_table,
.tblsize = ARRAY_SIZE(zoom2_batt_table),
};
static struct twl4030_usb_data zoom2_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static void __init omap_zoom2_init_irq(void)
{
omap_board_config = zoom2_config;
omap_board_config_size = ARRAY_SIZE(zoom2_config);
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
}
static struct omap_uart_config zoom2_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_board_config_kernel zoom2_config[] __initdata = {
{ OMAP_TAG_UART, &zoom2_uart_config },
};
static struct twl4030_gpio_platform_data zoom2_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.setup = zoom2_twl_gpio_setup,
};
static struct twl4030_madc_platform_data zoom2_madc_data = {
.irq_line = 1,
};
static struct twl4030_platform_data zoom2_twldata = {
@@ -49,7 +230,15 @@ static struct twl4030_platform_data zoom2_twldata = {
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.bci = &zoom2_bci_data,
.madc = &zoom2_madc_data,
.usb = &zoom2_usb_data,
.gpio = &zoom2_gpio_data,
.keypad = &zoom2_kp_twl4030_data,
.vmmc1 = &zoom2_vmmc1,
.vmmc2 = &zoom2_vmmc2,
.vsim = &zoom2_vsim,
};
static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = {
@@ -70,26 +259,13 @@ static int __init omap_i2c_init(void)
return 0;
}
static struct twl4030_hsmmc_info mmc[] __initdata = {
{
.mmc = 1,
.wires = 4,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
},
{} /* Terminator */
};
extern int __init omap_zoom2_debugboard_init(void);
static void __init omap_zoom2_init(void)
{
omap_i2c_init();
omap_board_config = zoom2_config;
omap_board_config_size = ARRAY_SIZE(zoom2_config);
omap_serial_init();
omap_zoom2_debugboard_init();
twl4030_mmc_init(mmc);
usb_musb_init();
}
arch/arm/mach-omap2/clock.c
+2
View File
@@ -1043,5 +1043,7 @@ void omap2_clk_disable_unused(struct clk *clk)
omap2_clk_disable(clk);
} else
_omap2_clk_disable(clk);
if (clk->clkdm != NULL)
pwrdm_clkdm_state_switch(clk->clkdm);
}
#endif
arch/arm/mach-omap2/clock34xx.c
+9 -8
View File
@@ -27,6 +27,7 @@
#include <linux/limits.h>
#include <linux/bitops.h>
#include <mach/cpu.h>
#include <mach/clock.h>
#include <mach/sram.h>
#include <asm/div64.h>
@@ -1067,17 +1068,17 @@ static int __init omap2_clk_arch_init(void)
return -EINVAL;
/* REVISIT: not yet ready for 343x */
#if 0
if (clk_set_rate(&virt_prcm_set, mpurate))
printk(KERN_ERR "Could not find matching MPU rate\n");
#endif
if (clk_set_rate(&dpll1_ck, mpurate))
printk(KERN_ERR "*** Unable to set MPU rate\n");
recalculate_root_clocks();
printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL3/MPU): "
printk(KERN_INFO "Switched to new clocking rate (Crystal/Core/MPU): "
"%ld.%01ld/%ld/%ld MHz\n",
(osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10,
(core_ck.rate / 1000000), (dpll1_fck.rate / 1000000)) ;
(osc_sys_ck.rate / 1000000), ((osc_sys_ck.rate / 100000) % 10),
(core_ck.rate / 1000000), (arm_fck.rate / 1000000)) ;
calibrate_delay();
return 0;
}
@@ -1136,7 +1137,7 @@ int __init omap2_clk_init(void)
recalculate_root_clocks();
printk(KERN_INFO "Clocking rate (Crystal/DPLL/ARM core): "
printk(KERN_INFO "Clocking rate (Crystal/Core/MPU): "
"%ld.%01ld/%ld/%ld MHz\n",
(osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10,
(core_ck.rate / 1000000), (arm_fck.rate / 1000000));
arch/arm/mach-omap2/clock34xx.h
+1 -20
View File
@@ -1020,6 +1020,7 @@ static struct clk arm_fck = {
.clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
.clksel_mask = OMAP3430_ST_MPU_CLK_MASK,
.clksel = arm_fck_clksel,
.clkdm_name = "mpu_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -1155,7 +1156,6 @@ static struct clk gfx_cg1_ck = {
.name = "gfx_cg1_ck",
.ops = &clkops_omap2_dflt_wait,
.parent = &gfx_l3_fck, /* REVISIT: correct? */
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
.enable_bit = OMAP3430ES1_EN_2D_SHIFT,
.clkdm_name = "gfx_3430es1_clkdm",
@@ -1166,7 +1166,6 @@ static struct clk gfx_cg2_ck = {
.name = "gfx_cg2_ck",
.ops = &clkops_omap2_dflt_wait,
.parent = &gfx_l3_fck, /* REVISIT: correct? */
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
.enable_bit = OMAP3430ES1_EN_3D_SHIFT,
.clkdm_name = "gfx_3430es1_clkdm",
@@ -1210,7 +1209,6 @@ static struct clk sgx_ick = {
.name = "sgx_ick",
.ops = &clkops_omap2_dflt_wait,
.parent = &l3_ick,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN),
.enable_bit = OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT,
.clkdm_name = "sgx_clkdm",
@@ -1223,7 +1221,6 @@ static struct clk d2d_26m_fck = {
.name = "d2d_26m_fck",
.ops = &clkops_omap2_dflt_wait,
.parent = &sys_ck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430ES1_EN_D2D_SHIFT,
.clkdm_name = "d2d_clkdm",
@@ -1234,7 +1231,6 @@ static struct clk modem_fck = {
.name = "modem_fck",
.ops = &clkops_omap2_dflt_wait,
.parent = &sys_ck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_MODEM_SHIFT,
.clkdm_name = "d2d_clkdm",
@@ -1622,7 +1618,6 @@ static struct clk core_l3_ick = {
.name = "core_l3_ick",
.ops = &clkops_null,
.parent = &l3_ick,
.init = &omap2_init_clk_clkdm,
.clkdm_name = "core_l3_clkdm",
.recalc = &followparent_recalc,
};
@@ -1691,7 +1686,6 @@ static struct clk core_l4_ick = {
.name = "core_l4_ick",
.ops = &clkops_null,
.parent = &l4_ick,
.init = &omap2_init_clk_clkdm,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -2089,7 +2083,6 @@ static struct clk dss_tv_fck = {
.name = "dss_tv_fck",
.ops = &clkops_omap2_dflt,
.parent = &omap_54m_fck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_TV_SHIFT,
.clkdm_name = "dss_clkdm",
@@ -2100,7 +2093,6 @@ static struct clk dss_96m_fck = {
.name = "dss_96m_fck",
.ops = &clkops_omap2_dflt,
.parent = &omap_96m_fck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_TV_SHIFT,
.clkdm_name = "dss_clkdm",
@@ -2111,7 +2103,6 @@ static struct clk dss2_alwon_fck = {
.name = "dss2_alwon_fck",
.ops = &clkops_omap2_dflt,
.parent = &sys_ck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_DSS2_SHIFT,
.clkdm_name = "dss_clkdm",
@@ -2123,7 +2114,6 @@ static struct clk dss_ick_3430es1 = {
.name = "dss_ick",
.ops = &clkops_omap2_dflt,
.parent = &l4_ick,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
.clkdm_name = "dss_clkdm",
@@ -2135,7 +2125,6 @@ static struct clk dss_ick_3430es2 = {
.name = "dss_ick",
.ops = &clkops_omap3430es2_dss_usbhost_wait,
.parent = &l4_ick,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
.clkdm_name = "dss_clkdm",
@@ -2159,7 +2148,6 @@ static struct clk cam_ick = {
.name = "cam_ick",
.ops = &clkops_omap2_dflt,
.parent = &l4_ick,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_CAM_SHIFT,
.clkdm_name = "cam_clkdm",
@@ -2170,7 +2158,6 @@ static struct clk csi2_96m_fck = {
.name = "csi2_96m_fck",
.ops = &clkops_omap2_dflt,
.parent = &core_96m_fck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_CSI2_SHIFT,
.clkdm_name = "cam_clkdm",
@@ -2183,7 +2170,6 @@ static struct clk usbhost_120m_fck = {
.name = "usbhost_120m_fck",
.ops = &clkops_omap2_dflt,
.parent = &dpll5_m2_ck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
.enable_bit = OMAP3430ES2_EN_USBHOST2_SHIFT,
.clkdm_name = "usbhost_clkdm",
@@ -2194,7 +2180,6 @@ static struct clk usbhost_48m_fck = {
.name = "usbhost_48m_fck",
.ops = &clkops_omap3430es2_dss_usbhost_wait,
.parent = &omap_48m_fck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
.enable_bit = OMAP3430ES2_EN_USBHOST1_SHIFT,
.clkdm_name = "usbhost_clkdm",
@@ -2206,7 +2191,6 @@ static struct clk usbhost_ick = {
.name = "usbhost_ick",
.ops = &clkops_omap3430es2_dss_usbhost_wait,
.parent = &l4_ick,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
.enable_bit = OMAP3430ES2_EN_USBHOST_SHIFT,
.clkdm_name = "usbhost_clkdm",
@@ -2268,7 +2252,6 @@ static struct clk gpt1_fck = {
static struct clk wkup_32k_fck = {
.name = "wkup_32k_fck",
.ops = &clkops_null,
.init = &omap2_init_clk_clkdm,
.parent = &omap_32k_fck,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
@@ -2383,7 +2366,6 @@ static struct clk per_96m_fck = {
.name = "per_96m_fck",
.ops = &clkops_null,
.parent = &omap_96m_alwon_fck,
.init = &omap2_init_clk_clkdm,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
@@ -2392,7 +2374,6 @@ static struct clk per_48m_fck = {
.name = "per_48m_fck",
.ops = &clkops_null,
.parent = &omap_48m_fck,
.init = &omap2_init_clk_clkdm,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
arch/arm/mach-omap2/clockdomain.c
+8 -2
View File
@@ -299,7 +299,8 @@ struct clockdomain *clkdm_lookup(const char *name)
* anything else to indicate failure; or -EINVAL if the function pointer
* is null.
*/
int clkdm_for_each(int (*fn)(struct clockdomain *clkdm))
int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user),
void *user)
{
struct clockdomain *clkdm;
int ret = 0;
@@ -309,7 +310,7 @@ int clkdm_for_each(int (*fn)(struct clockdomain *clkdm))
mutex_lock(&clkdm_mutex);
list_for_each_entry(clkdm, &clkdm_list, node) {
ret = (*fn)(clkdm);
ret = (*fn)(clkdm, user);
if (ret)
break;
}
@@ -484,6 +485,8 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
v << __ffs(clkdm->clktrctrl_mask),
clkdm->pwrdm.ptr->prcm_offs,
CM_CLKSTCTRL);
pwrdm_clkdm_state_switch(clkdm);
}
/**
@@ -572,6 +575,7 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
omap2_clkdm_wakeup(clkdm);
pwrdm_wait_transition(clkdm->pwrdm.ptr);
pwrdm_clkdm_state_switch(clkdm);
return 0;
}
@@ -624,6 +628,8 @@ int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
else
omap2_clkdm_sleep(clkdm);
pwrdm_clkdm_state_switch(clkdm);
return 0;
}
arch/arm/mach-omap2/cm.c
+70
View File
@@ -0,0 +1,70 @@
/*
* OMAP2/3 CM module functions
*
* Copyright (C) 2009 Nokia Corporation
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
#include <asm/atomic.h>
#include "cm.h"
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
/* MAX_MODULE_READY_TIME: max milliseconds for module to leave idle */
#define MAX_MODULE_READY_TIME 20000
static const u8 cm_idlest_offs[] = {
CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3
};
/**
* omap2_cm_wait_idlest_ready - wait for a module to leave idle or standby
* @prcm_mod: PRCM module offset
* @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
* @idlest_shift: shift of the bit in the CM_IDLEST* register to check
*
* XXX document
*/
int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
{
int ena = 0, i = 0;
u8 cm_idlest_reg;
u32 mask;
if (!idlest_id || (idlest_id > ARRAY_SIZE(cm_idlest_offs)))
return -EINVAL;
cm_idlest_reg = cm_idlest_offs[idlest_id - 1];
if (cpu_is_omap24xx())
ena = idlest_shift;
else if (cpu_is_omap34xx())
ena = 0;
else
BUG();
mask = 1 << idlest_shift;
/* XXX should be OMAP2 CM */
while (((cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) != ena) &&
(i++ < MAX_MODULE_READY_TIME))
udelay(1);
return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
}
arch/arm/mach-omap2/cm.h
+7 -3
View File
@@ -17,11 +17,11 @@
#include "prcm-common.h"
#define OMAP2420_CM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
OMAP2_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
#define OMAP2430_CM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
OMAP2_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
#define OMAP34XX_CM_REGADDR(module, reg) \
IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
OMAP2_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
/*
* Architecture-specific global CM registers
@@ -98,6 +98,10 @@ extern u32 cm_read_mod_reg(s16 module, u16 idx);
extern void cm_write_mod_reg(u32 val, s16 module, u16 idx);
extern u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
extern int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
u8 idlest_shift);
extern int omap4_cm_wait_module_ready(u32 prcm_mod, u8 prcm_dev_offs);
static inline u32 cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
return cm_rmw_mod_reg_bits(bits, bits, module, idx);
arch/arm/mach-omap2/cm4xxx.c
+68
View File
@@ -0,0 +1,68 @@
/*
* OMAP4 CM module functions
*
* Copyright (C) 2009 Nokia Corporation
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
#include <asm/atomic.h>
#include "cm.h"
#include "cm-regbits-4xxx.h"
/* XXX move this to cm.h */
/* MAX_MODULE_READY_TIME: max milliseconds for module to leave idle */
#define MAX_MODULE_READY_TIME 20000
/*
* OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK: isolates the IDLEST field in the
* CM_CLKCTRL register.
*/
#define OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK (0x2 << 16)
/*
* OMAP4 prcm_mod u32 fields contain packed data: the CM ID in bit 16 and
* the PRCM module offset address (from the CM module base) in bits 15-0.
*/
#define OMAP4_PRCM_MOD_CM_ID_SHIFT 16
#define OMAP4_PRCM_MOD_OFFS_MASK 0xffff
/**
* omap4_cm_wait_idlest_ready - wait for a module to leave idle or standby
* @prcm_mod: PRCM module offset (XXX example)
* @prcm_dev_offs: PRCM device offset (e.g. MCASP XXX example)
*
* XXX document
*/
int omap4_cm_wait_idlest_ready(u32 prcm_mod, u8 prcm_dev_offs)
{
int i = 0;
u8 cm_id;
u16 prcm_mod_offs;
u32 mask = OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK;
cm_id = prcm_mod >> OMAP4_PRCM_MOD_CM_ID_SHIFT;
prcm_mod_offs = prcm_mod & OMAP4_PRCM_MOD_OFFS_MASK;
while (((omap4_cm_read_mod_reg(cm_id, prcm_mod_offs, prcm_dev_offs,
OMAP4_CM_CLKCTRL_DREG) & mask) != 0) &&
(i++ < MAX_MODULE_READY_TIME))
udelay(1);
return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
}
arch/arm/mach-omap2/devices.c
+41
View File
@@ -513,6 +513,47 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
}
}
if (cpu_is_omap3430()) {
if (controller_nr == 0) {
omap_cfg_reg(N28_3430_MMC1_CLK);
omap_cfg_reg(M27_3430_MMC1_CMD);
omap_cfg_reg(N27_3430_MMC1_DAT0);
if (mmc_controller->slots[0].wires == 4 ||
mmc_controller->slots[0].wires == 8) {
omap_cfg_reg(N26_3430_MMC1_DAT1);
omap_cfg_reg(N25_3430_MMC1_DAT2);
omap_cfg_reg(P28_3430_MMC1_DAT3);
}
if (mmc_controller->slots[0].wires == 8) {
omap_cfg_reg(P27_3430_MMC1_DAT4);
omap_cfg_reg(P26_3430_MMC1_DAT5);
omap_cfg_reg(R27_3430_MMC1_DAT6);
omap_cfg_reg(R25_3430_MMC1_DAT7);
}
}
if (controller_nr == 1) {
/* MMC2 */
omap_cfg_reg(AE2_3430_MMC2_CLK);
omap_cfg_reg(AG5_3430_MMC2_CMD);
omap_cfg_reg(AH5_3430_MMC2_DAT0);
/*
* For 8 wire configurations, Lines DAT4, 5, 6 and 7 need to be muxed
* in the board-*.c files
*/
if (mmc_controller->slots[0].wires == 4 ||
mmc_controller->slots[0].wires == 8) {
omap_cfg_reg(AH4_3430_MMC2_DAT1);
omap_cfg_reg(AG4_3430_MMC2_DAT2);
omap_cfg_reg(AF4_3430_MMC2_DAT3);
}
}
/*
* For MMC3 the pins need to be muxed in the board-*.c files
*/
}
}
void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
arch/arm/mach-omap2/io.c
+22 -1
View File
@@ -32,17 +32,23 @@
#include <mach/sram.h>
#include <mach/sdrc.h>
#include <mach/gpmc.h>
#include <mach/serial.h>
#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdev is ready */
#include "clock.h"
#include <mach/omap-pm.h>
#include <mach/powerdomain.h>
#include "powerdomains.h"
#include <mach/clockdomain.h>
#include "clockdomains.h"
#endif
#include <mach/omap_hwmod.h>
#include "omap_hwmod_2420.h"
#include "omap_hwmod_2430.h"
#include "omap_hwmod_34xx.h"
/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
@@ -279,11 +285,26 @@ static int __init _omap2_init_reprogram_sdrc(void)
void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1)
{
struct omap_hwmod **hwmods = NULL;
if (cpu_is_omap2420())
hwmods = omap2420_hwmods;
else if (cpu_is_omap2430())
hwmods = omap2430_hwmods;
else if (cpu_is_omap34xx())
hwmods = omap34xx_hwmods;
omap_hwmod_init(hwmods);
omap2_mux_init();
#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
/* The OPP tables have to be registered before a clk init */
omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
pwrdm_init(powerdomains_omap);
clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
omap2_clk_init();
omap_serial_early_init();
omap_hwmod_late_init();
omap_pm_if_init();
omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
_omap2_init_reprogram_sdrc();
#endif
arch/arm/mach-omap2/iommu2.c
+13 -4
View File
@@ -217,10 +217,19 @@ static ssize_t omap2_dump_cr(struct iommu *obj, struct cr_regs *cr, char *buf)
}
#define pr_reg(name) \
p += sprintf(p, "%20s: %08x\n", \
__stringify(name), iommu_read_reg(obj, MMU_##name));
do { \
ssize_t bytes; \
const char *str = "%20s: %08x\n"; \
const int maxcol = 32; \
bytes = snprintf(p, maxcol, str, __stringify(name), \
iommu_read_reg(obj, MMU_##name)); \
p += bytes; \
len -= bytes; \
if (len < maxcol) \
goto out; \
} while (0)
static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf)
static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t len)
{
char *p = buf;
@@ -242,7 +251,7 @@ static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf)
pr_reg(READ_CAM);
pr_reg(READ_RAM);
pr_reg(EMU_FAULT_AD);
out:
return p - buf;
}
arch/arm/mach-omap2/mux.c
+55
View File
@@ -492,6 +492,61 @@ MUX_CFG_34XX("H16_34XX_SDRC_CKE0", 0x262,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
MUX_CFG_34XX("H17_34XX_SDRC_CKE1", 0x264,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
/* MMC1 */
MUX_CFG_34XX("N28_3430_MMC1_CLK", 0x144,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("M27_3430_MMC1_CMD", 0x146,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("N27_3430_MMC1_DAT0", 0x148,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("N26_3430_MMC1_DAT1", 0x14a,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("N25_3430_MMC1_DAT2", 0x14c,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("P28_3430_MMC1_DAT3", 0x14e,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("P27_3430_MMC1_DAT4", 0x150,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("P26_3430_MMC1_DAT5", 0x152,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("R27_3430_MMC1_DAT6", 0x154,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("R25_3430_MMC1_DAT7", 0x156,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
/* MMC2 */
MUX_CFG_34XX("AE2_3430_MMC2_CLK", 0x158,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AG5_3430_MMC2_CMD", 0x15A,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AH5_3430_MMC2_DAT0", 0x15c,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AH4_3430_MMC2_DAT1", 0x15e,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AG4_3430_MMC2_DAT2", 0x160,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AF4_3430_MMC2_DAT3", 0x162,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
/* MMC3 */
MUX_CFG_34XX("AF10_3430_MMC3_CLK", 0x5d8,
OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AC3_3430_MMC3_CMD", 0x1d0,
OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AE11_3430_MMC3_DAT0", 0x5e4,
OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AH9_3430_MMC3_DAT1", 0x5e6,
OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AF13_3430_MMC3_DAT2", 0x5e8,
OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AF13_3430_MMC3_DAT3", 0x5e2,
OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
/* SYS_NIRQ T2 INT1 */
MUX_CFG_34XX("AF26_34XX_SYS_NIRQ", 0x1E0,
OMAP3_WAKEUP_EN | OMAP34XX_PIN_INPUT_PULLUP |
OMAP34XX_MUX_MODE0)
};
#define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins)
arch/arm/mach-omap2/omap-smp.c
+1 -1
View File
@@ -54,7 +54,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
* for us: do so
*/
gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
/*
* Synchronise with the boot thread.
arch/arm/mach-omap2/omap_hwmod.c
+1554
View File
File diff suppressed because it is too large Load Diff
arch/arm/mach-omap2/omap_hwmod_2420.h
+141
View File
@@ -0,0 +1,141 @@
/*
* omap_hwmod_2420.h - hardware modules present on the OMAP2420 chips
*
* Copyright (C) 2009 Nokia Corporation
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* XXX handle crossbar/shared link difference for L3?
*
*/
#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2420_H
#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2420_H
#ifdef CONFIG_ARCH_OMAP2420
#include <mach/omap_hwmod.h>
#include <mach/irqs.h>
#include <mach/cpu.h>
#include <mach/dma.h>
#include "prm-regbits-24xx.h"
static struct omap_hwmod omap2420_mpu_hwmod;
static struct omap_hwmod omap2420_l3_hwmod;
static struct omap_hwmod omap2420_l4_core_hwmod;
/* L3 -> L4_CORE interface */
static struct omap_hwmod_ocp_if omap2420_l3__l4_core = {
.master = &omap2420_l3_hwmod,
.slave = &omap2420_l4_core_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* MPU -> L3 interface */
static struct omap_hwmod_ocp_if omap2420_mpu__l3 = {
.master = &omap2420_mpu_hwmod,
.slave = &omap2420_l3_hwmod,
.user = OCP_USER_MPU,
};
/* Slave interfaces on the L3 interconnect */
static struct omap_hwmod_ocp_if *omap2420_l3_slaves[] = {
&omap2420_mpu__l3,
};
/* Master interfaces on the L3 interconnect */
static struct omap_hwmod_ocp_if *omap2420_l3_masters[] = {
&omap2420_l3__l4_core,
};
/* L3 */
static struct omap_hwmod omap2420_l3_hwmod = {
.name = "l3_hwmod",
.masters = omap2420_l3_masters,
.masters_cnt = ARRAY_SIZE(omap2420_l3_masters),
.slaves = omap2420_l3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_l3_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
static struct omap_hwmod omap2420_l4_wkup_hwmod;
/* L4_CORE -> L4_WKUP interface */
static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = {
.master = &omap2420_l4_core_hwmod,
.slave = &omap2420_l4_wkup_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* Slave interfaces on the L4_CORE interconnect */
static struct omap_hwmod_ocp_if *omap2420_l4_core_slaves[] = {
&omap2420_l3__l4_core,
};
/* Master interfaces on the L4_CORE interconnect */
static struct omap_hwmod_ocp_if *omap2420_l4_core_masters[] = {
&omap2420_l4_core__l4_wkup,
};
/* L4 CORE */
static struct omap_hwmod omap2420_l4_core_hwmod = {
.name = "l4_core_hwmod",
.masters = omap2420_l4_core_masters,
.masters_cnt = ARRAY_SIZE(omap2420_l4_core_masters),
.slaves = omap2420_l4_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_l4_core_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* Slave interfaces on the L4_WKUP interconnect */
static struct omap_hwmod_ocp_if *omap2420_l4_wkup_slaves[] = {
&omap2420_l4_core__l4_wkup,
};
/* Master interfaces on the L4_WKUP interconnect */
static struct omap_hwmod_ocp_if *omap2420_l4_wkup_masters[] = {
};
/* L4 WKUP */
static struct omap_hwmod omap2420_l4_wkup_hwmod = {
.name = "l4_wkup_hwmod",
.masters = omap2420_l4_wkup_masters,
.masters_cnt = ARRAY_SIZE(omap2420_l4_wkup_masters),
.slaves = omap2420_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_l4_wkup_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* Master interfaces on the MPU device */
static struct omap_hwmod_ocp_if *omap2420_mpu_masters[] = {
&omap2420_mpu__l3,
};
/* MPU */
static struct omap_hwmod omap2420_mpu_hwmod = {
.name = "mpu_hwmod",
.clkdev_dev_id = NULL,
.clkdev_con_id = "mpu_ck",
.masters = omap2420_mpu_masters,
.masters_cnt = ARRAY_SIZE(omap2420_mpu_masters),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
static __initdata struct omap_hwmod *omap2420_hwmods[] = {
&omap2420_l3_hwmod,
&omap2420_l4_core_hwmod,
&omap2420_l4_wkup_hwmod,
&omap2420_mpu_hwmod,
NULL,
};
#else
# define omap2420_hwmods 0
#endif
#endif
arch/arm/mach-omap2/omap_hwmod_2430.h
+143
View File
@@ -0,0 +1,143 @@
/*
* omap_hwmod_2430.h - hardware modules present on the OMAP2430 chips
*
* Copyright (C) 2009 Nokia Corporation
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* XXX handle crossbar/shared link difference for L3?
*
*/
#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2430_H
#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2430_H
#ifdef CONFIG_ARCH_OMAP2430
#include <mach/omap_hwmod.h>
#include <mach/irqs.h>
#include <mach/cpu.h>
#include <mach/dma.h>
#include "prm-regbits-24xx.h"
static struct omap_hwmod omap2430_mpu_hwmod;
static struct omap_hwmod omap2430_l3_hwmod;
static struct omap_hwmod omap2430_l4_core_hwmod;
/* L3 -> L4_CORE interface */
static struct omap_hwmod_ocp_if omap2430_l3__l4_core = {
.master = &omap2430_l3_hwmod,
.slave = &omap2430_l4_core_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* MPU -> L3 interface */
static struct omap_hwmod_ocp_if omap2430_mpu__l3 = {
.master = &omap2430_mpu_hwmod,
.slave = &omap2430_l3_hwmod,
.user = OCP_USER_MPU,
};
/* Slave interfaces on the L3 interconnect */
static struct omap_hwmod_ocp_if *omap2430_l3_slaves[] = {
&omap2430_mpu__l3,
};
/* Master interfaces on the L3 interconnect */
static struct omap_hwmod_ocp_if *omap2430_l3_masters[] = {
&omap2430_l3__l4_core,
};
/* L3 */
static struct omap_hwmod omap2430_l3_hwmod = {
.name = "l3_hwmod",
.masters = omap2430_l3_masters,
.masters_cnt = ARRAY_SIZE(omap2430_l3_masters),
.slaves = omap2430_l3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_l3_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
static struct omap_hwmod omap2430_l4_wkup_hwmod;
static struct omap_hwmod omap2430_mmc1_hwmod;
static struct omap_hwmod omap2430_mmc2_hwmod;
/* L4_CORE -> L4_WKUP interface */
static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = {
.master = &omap2430_l4_core_hwmod,
.slave = &omap2430_l4_wkup_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* Slave interfaces on the L4_CORE interconnect */
static struct omap_hwmod_ocp_if *omap2430_l4_core_slaves[] = {
&omap2430_l3__l4_core,
};
/* Master interfaces on the L4_CORE interconnect */
static struct omap_hwmod_ocp_if *omap2430_l4_core_masters[] = {
&omap2430_l4_core__l4_wkup,
};
/* L4 CORE */
static struct omap_hwmod omap2430_l4_core_hwmod = {
.name = "l4_core_hwmod",
.masters = omap2430_l4_core_masters,
.masters_cnt = ARRAY_SIZE(omap2430_l4_core_masters),
.slaves = omap2430_l4_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_l4_core_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* Slave interfaces on the L4_WKUP interconnect */
static struct omap_hwmod_ocp_if *omap2430_l4_wkup_slaves[] = {
&omap2430_l4_core__l4_wkup,
};
/* Master interfaces on the L4_WKUP interconnect */
static struct omap_hwmod_ocp_if *omap2430_l4_wkup_masters[] = {
};
/* L4 WKUP */
static struct omap_hwmod omap2430_l4_wkup_hwmod = {
.name = "l4_wkup_hwmod",
.masters = omap2430_l4_wkup_masters,
.masters_cnt = ARRAY_SIZE(omap2430_l4_wkup_masters),
.slaves = omap2430_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_l4_wkup_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* Master interfaces on the MPU device */
static struct omap_hwmod_ocp_if *omap2430_mpu_masters[] = {
&omap2430_mpu__l3,
};
/* MPU */
static struct omap_hwmod omap2430_mpu_hwmod = {
.name = "mpu_hwmod",
.clkdev_dev_id = NULL,
.clkdev_con_id = "mpu_ck",
.masters = omap2430_mpu_masters,
.masters_cnt = ARRAY_SIZE(omap2430_mpu_masters),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
static __initdata struct omap_hwmod *omap2430_hwmods[] = {
&omap2430_l3_hwmod,
&omap2430_l4_core_hwmod,
&omap2430_l4_wkup_hwmod,
&omap2430_mpu_hwmod,
NULL,
};
#else
# define omap2430_hwmods 0
#endif
#endif
arch/arm/mach-omap2/omap_hwmod_34xx.h
+168
View File
@@ -0,0 +1,168 @@
/*
* omap_hwmod_34xx.h - hardware modules present on the OMAP34xx chips
*
* Copyright (C) 2009 Nokia Corporation
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD34XX_H
#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD34XX_H
#ifdef CONFIG_ARCH_OMAP34XX
#include <mach/omap_hwmod.h>
#include <mach/irqs.h>
#include <mach/cpu.h>
#include <mach/dma.h>
#include "prm-regbits-34xx.h"
static struct omap_hwmod omap34xx_mpu_hwmod;
static struct omap_hwmod omap34xx_l3_hwmod;
static struct omap_hwmod omap34xx_l4_core_hwmod;
static struct omap_hwmod omap34xx_l4_per_hwmod;
/* L3 -> L4_CORE interface */
static struct omap_hwmod_ocp_if omap34xx_l3__l4_core = {
.master = &omap34xx_l3_hwmod,
.slave = &omap34xx_l4_core_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L3 -> L4_PER interface */
static struct omap_hwmod_ocp_if omap34xx_l3__l4_per = {
.master = &omap34xx_l3_hwmod,
.slave = &omap34xx_l4_per_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* MPU -> L3 interface */
static struct omap_hwmod_ocp_if omap34xx_mpu__l3 = {
.master = &omap34xx_mpu_hwmod,
.slave = &omap34xx_l3_hwmod,
.user = OCP_USER_MPU,
};
/* Slave interfaces on the L3 interconnect */
static struct omap_hwmod_ocp_if *omap34xx_l3_slaves[] = {
&omap34xx_mpu__l3,
};
/* Master interfaces on the L3 interconnect */
static struct omap_hwmod_ocp_if *omap34xx_l3_masters[] = {
&omap34xx_l3__l4_core,
&omap34xx_l3__l4_per,
};
/* L3 */
static struct omap_hwmod omap34xx_l3_hwmod = {
.name = "l3_hwmod",
.masters = omap34xx_l3_masters,
.masters_cnt = ARRAY_SIZE(omap34xx_l3_masters),
.slaves = omap34xx_l3_slaves,
.slaves_cnt = ARRAY_SIZE(omap34xx_l3_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
static struct omap_hwmod omap34xx_l4_wkup_hwmod;
/* L4_CORE -> L4_WKUP interface */
static struct omap_hwmod_ocp_if omap34xx_l4_core__l4_wkup = {
.master = &omap34xx_l4_core_hwmod,
.slave = &omap34xx_l4_wkup_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* Slave interfaces on the L4_CORE interconnect */
static struct omap_hwmod_ocp_if *omap34xx_l4_core_slaves[] = {
&omap34xx_l3__l4_core,
};
/* Master interfaces on the L4_CORE interconnect */
static struct omap_hwmod_ocp_if *omap34xx_l4_core_masters[] = {
&omap34xx_l4_core__l4_wkup,
};
/* L4 CORE */
static struct omap_hwmod omap34xx_l4_core_hwmod = {
.name = "l4_core_hwmod",
.masters = omap34xx_l4_core_masters,
.masters_cnt = ARRAY_SIZE(omap34xx_l4_core_masters),
.slaves = omap34xx_l4_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap34xx_l4_core_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* Slave interfaces on the L4_PER interconnect */
static struct omap_hwmod_ocp_if *omap34xx_l4_per_slaves[] = {
&omap34xx_l3__l4_per,
};
/* Master interfaces on the L4_PER interconnect */
static struct omap_hwmod_ocp_if *omap34xx_l4_per_masters[] = {
};
/* L4 PER */
static struct omap_hwmod omap34xx_l4_per_hwmod = {
.name = "l4_per_hwmod",
.masters = omap34xx_l4_per_masters,
.masters_cnt = ARRAY_SIZE(omap34xx_l4_per_masters),
.slaves = omap34xx_l4_per_slaves,
.slaves_cnt = ARRAY_SIZE(omap34xx_l4_per_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* Slave interfaces on the L4_WKUP interconnect */
static struct omap_hwmod_ocp_if *omap34xx_l4_wkup_slaves[] = {
&omap34xx_l4_core__l4_wkup,
};
/* Master interfaces on the L4_WKUP interconnect */
static struct omap_hwmod_ocp_if *omap34xx_l4_wkup_masters[] = {
};
/* L4 WKUP */
static struct omap_hwmod omap34xx_l4_wkup_hwmod = {
.name = "l4_wkup_hwmod",
.masters = omap34xx_l4_wkup_masters,
.masters_cnt = ARRAY_SIZE(omap34xx_l4_wkup_masters),
.slaves = omap34xx_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap34xx_l4_wkup_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* Master interfaces on the MPU device */
static struct omap_hwmod_ocp_if *omap34xx_mpu_masters[] = {
&omap34xx_mpu__l3,
};
/* MPU */
static struct omap_hwmod omap34xx_mpu_hwmod = {
.name = "mpu_hwmod",
.clkdev_dev_id = NULL,
.clkdev_con_id = "arm_fck",
.masters = omap34xx_mpu_masters,
.masters_cnt = ARRAY_SIZE(omap34xx_mpu_masters),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
static __initdata struct omap_hwmod *omap34xx_hwmods[] = {
&omap34xx_l3_hwmod,
&omap34xx_l4_core_hwmod,
&omap34xx_l4_per_hwmod,
&omap34xx_l4_wkup_hwmod,
&omap34xx_mpu_hwmod,
NULL,
};
#else
# define omap34xx_hwmods 0
#endif
#endif
arch/arm/mach-omap2/pm-debug.c
+429 -2
View File
@@ -20,13 +20,16 @@
*/
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/sched.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
#include <mach/clock.h>
#include <mach/board.h>
#include <mach/powerdomain.h>
#include <mach/clockdomain.h>
#include "prm.h"
#include "cm.h"
@@ -48,7 +51,9 @@ int omap2_pm_debug;
regs[reg_count++].val = __raw_readl(reg)
#define DUMP_INTC_REG(reg, off) \
regs[reg_count].name = #reg; \
regs[reg_count++].val = __raw_readl(IO_ADDRESS(0x480fe000 + (off)))
regs[reg_count++].val = __raw_readl(OMAP2_IO_ADDRESS(0x480fe000 + (off)))
static int __init pm_dbg_init(void);
void omap2_pm_dump(int mode, int resume, unsigned int us)
{
@@ -150,3 +155,425 @@ void omap2_pm_dump(int mode, int resume, unsigned int us)
for (i = 0; i < reg_count; i++)
printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
}
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
#include <linux/seq_file.h>
static void pm_dbg_regset_store(u32 *ptr);
struct dentry *pm_dbg_dir;
static int pm_dbg_init_done;
enum {
DEBUG_FILE_COUNTERS = 0,
DEBUG_FILE_TIMERS,
};
struct pm_module_def {
char name[8]; /* Name of the module */
short type; /* CM or PRM */
unsigned short offset;
int low; /* First register address on this module */
int high; /* Last register address on this module */
};
#define MOD_CM 0
#define MOD_PRM 1
static const struct pm_module_def *pm_dbg_reg_modules;
static const struct pm_module_def omap3_pm_reg_modules[] = {
{ "IVA2", MOD_CM, OMAP3430_IVA2_MOD, 0, 0x4c },
{ "OCP", MOD_CM, OCP_MOD, 0, 0x10 },
{ "MPU", MOD_CM, MPU_MOD, 4, 0x4c },
{ "CORE", MOD_CM, CORE_MOD, 0, 0x4c },
{ "SGX", MOD_CM, OMAP3430ES2_SGX_MOD, 0, 0x4c },
{ "WKUP", MOD_CM, WKUP_MOD, 0, 0x40 },
{ "CCR", MOD_CM, PLL_MOD, 0, 0x70 },
{ "DSS", MOD_CM, OMAP3430_DSS_MOD, 0, 0x4c },
{ "CAM", MOD_CM, OMAP3430_CAM_MOD, 0, 0x4c },
{ "PER", MOD_CM, OMAP3430_PER_MOD, 0, 0x4c },
{ "EMU", MOD_CM, OMAP3430_EMU_MOD, 0x40, 0x54 },
{ "NEON", MOD_CM, OMAP3430_NEON_MOD, 0x20, 0x48 },
{ "USB", MOD_CM, OMAP3430ES2_USBHOST_MOD, 0, 0x4c },
{ "IVA2", MOD_PRM, OMAP3430_IVA2_MOD, 0x50, 0xfc },
{ "OCP", MOD_PRM, OCP_MOD, 4, 0x1c },
{ "MPU", MOD_PRM, MPU_MOD, 0x58, 0xe8 },
{ "CORE", MOD_PRM, CORE_MOD, 0x58, 0xf8 },
{ "SGX", MOD_PRM, OMAP3430ES2_SGX_MOD, 0x58, 0xe8 },
{ "WKUP", MOD_PRM, WKUP_MOD, 0xa0, 0xb0 },
{ "CCR", MOD_PRM, PLL_MOD, 0x40, 0x70 },
{ "DSS", MOD_PRM, OMAP3430_DSS_MOD, 0x58, 0xe8 },
{ "CAM", MOD_PRM, OMAP3430_CAM_MOD, 0x58, 0xe8 },
{ "PER", MOD_PRM, OMAP3430_PER_MOD, 0x58, 0xe8 },
{ "EMU", MOD_PRM, OMAP3430_EMU_MOD, 0x58, 0xe4 },
{ "GLBL", MOD_PRM, OMAP3430_GR_MOD, 0x20, 0xe4 },
{ "NEON", MOD_PRM, OMAP3430_NEON_MOD, 0x58, 0xe8 },
{ "USB", MOD_PRM, OMAP3430ES2_USBHOST_MOD, 0x58, 0xe8 },
{ "", 0, 0, 0, 0 },
};
#define PM_DBG_MAX_REG_SETS 4
static void *pm_dbg_reg_set[PM_DBG_MAX_REG_SETS];
static int pm_dbg_get_regset_size(void)
{
static int regset_size;
if (regset_size == 0) {
int i = 0;
while (pm_dbg_reg_modules[i].name[0] != 0) {
regset_size += pm_dbg_reg_modules[i].high +
4 - pm_dbg_reg_modules[i].low;
i++;
}
}
return regset_size;
}
static int pm_dbg_show_regs(struct seq_file *s, void *unused)
{
int i, j;
unsigned long val;
int reg_set = (int)s->private;
u32 *ptr;
void *store = NULL;
int regs;
int linefeed;
if (reg_set == 0) {
store = kmalloc(pm_dbg_get_regset_size(), GFP_KERNEL);
ptr = store;
pm_dbg_regset_store(ptr);
} else {
ptr = pm_dbg_reg_set[reg_set - 1];
}
i = 0;
while (pm_dbg_reg_modules[i].name[0] != 0) {
regs = 0;
linefeed = 0;
if (pm_dbg_reg_modules[i].type == MOD_CM)
seq_printf(s, "MOD: CM_%s (%08x)\n",
pm_dbg_reg_modules[i].name,
(u32)(OMAP3430_CM_BASE +
pm_dbg_reg_modules[i].offset));
else
seq_printf(s, "MOD: PRM_%s (%08x)\n",
pm_dbg_reg_modules[i].name,
(u32)(OMAP3430_PRM_BASE +
pm_dbg_reg_modules[i].offset));
for (j = pm_dbg_reg_modules[i].low;
j <= pm_dbg_reg_modules[i].high; j += 4) {
val = *(ptr++);
if (val != 0) {
regs++;
if (linefeed) {
seq_printf(s, "\n");
linefeed = 0;
}
seq_printf(s, " %02x => %08lx", j, val);
if (regs % 4 == 0)
linefeed = 1;
}
}
seq_printf(s, "\n");
i++;
}
if (store != NULL)
kfree(store);
return 0;
}
static void pm_dbg_regset_store(u32 *ptr)
{
int i, j;
u32 val;
i = 0;
while (pm_dbg_reg_modules[i].name[0] != 0) {
for (j = pm_dbg_reg_modules[i].low;
j <= pm_dbg_reg_modules[i].high; j += 4) {
if (pm_dbg_reg_modules[i].type == MOD_CM)
val = cm_read_mod_reg(
pm_dbg_reg_modules[i].offset, j);
else
val = prm_read_mod_reg(
pm_dbg_reg_modules[i].offset, j);
*(ptr++) = val;
}
i++;
}
}
int pm_dbg_regset_save(int reg_set)
{
if (pm_dbg_reg_set[reg_set-1] == NULL)
return -EINVAL;
pm_dbg_regset_store(pm_dbg_reg_set[reg_set-1]);
return 0;
}
static const char pwrdm_state_names[][4] = {
"OFF",
"RET",
"INA",
"ON"
};
void pm_dbg_update_time(struct powerdomain *pwrdm, int prev)
{
s64 t;
if (!pm_dbg_init_done)
return ;
/* Update timer for previous state */
t = sched_clock();
pwrdm->state_timer[prev] += t - pwrdm->timer;
pwrdm->timer = t;
}
static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user)
{
struct seq_file *s = (struct seq_file *)user;
if (strcmp(clkdm->name, "emu_clkdm") == 0 ||
strcmp(clkdm->name, "wkup_clkdm") == 0 ||
strncmp(clkdm->name, "dpll", 4) == 0)
return 0;
seq_printf(s, "%s->%s (%d)", clkdm->name,
clkdm->pwrdm.ptr->name,
atomic_read(&clkdm->usecount));
seq_printf(s, "\n");
return 0;
}
static int pwrdm_dbg_show_counter(struct powerdomain *pwrdm, void *user)
{
struct seq_file *s = (struct seq_file *)user;
int i;
if (strcmp(pwrdm->name, "emu_pwrdm") == 0 ||
strcmp(pwrdm->name, "wkup_pwrdm") == 0 ||
strncmp(pwrdm->name, "dpll", 4) == 0)
return 0;
if (pwrdm->state != pwrdm_read_pwrst(pwrdm))
printk(KERN_ERR "pwrdm state mismatch(%s) %d != %d\n",
pwrdm->name, pwrdm->state, pwrdm_read_pwrst(pwrdm));
seq_printf(s, "%s (%s)", pwrdm->name,
pwrdm_state_names[pwrdm->state]);
for (i = 0; i < 4; i++)
seq_printf(s, ",%s:%d", pwrdm_state_names[i],
pwrdm->state_counter[i]);
seq_printf(s, "\n");
return 0;
}
static int pwrdm_dbg_show_timer(struct powerdomain *pwrdm, void *user)
{
struct seq_file *s = (struct seq_file *)user;
int i;
if (strcmp(pwrdm->name, "emu_pwrdm") == 0 ||
strcmp(pwrdm->name, "wkup_pwrdm") == 0 ||
strncmp(pwrdm->name, "dpll", 4) == 0)
return 0;
pwrdm_state_switch(pwrdm);
seq_printf(s, "%s (%s)", pwrdm->name,
pwrdm_state_names[pwrdm->state]);
for (i = 0; i < 4; i++)
seq_printf(s, ",%s:%lld", pwrdm_state_names[i],
pwrdm->state_timer[i]);
seq_printf(s, "\n");
return 0;
}
static int pm_dbg_show_counters(struct seq_file *s, void *unused)
{
pwrdm_for_each(pwrdm_dbg_show_counter, s);
clkdm_for_each(clkdm_dbg_show_counter, s);
return 0;
}
static int pm_dbg_show_timers(struct seq_file *s, void *unused)
{
pwrdm_for_each(pwrdm_dbg_show_timer, s);
return 0;
}
static int pm_dbg_open(struct inode *inode, struct file *file)
{
switch ((int)inode->i_private) {
case DEBUG_FILE_COUNTERS:
return single_open(file, pm_dbg_show_counters,
&inode->i_private);
case DEBUG_FILE_TIMERS:
default:
return single_open(file, pm_dbg_show_timers,
&inode->i_private);
};
}
static int pm_dbg_reg_open(struct inode *inode, struct file *file)
{
return single_open(file, pm_dbg_show_regs, inode->i_private);
}
static const struct file_operations debug_fops = {
.open = pm_dbg_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static const struct file_operations debug_reg_fops = {
.open = pm_dbg_reg_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
int pm_dbg_regset_init(int reg_set)
{
char name[2];
if (!pm_dbg_init_done)
pm_dbg_init();
if (reg_set < 1 || reg_set > PM_DBG_MAX_REG_SETS ||
pm_dbg_reg_set[reg_set-1] != NULL)
return -EINVAL;
pm_dbg_reg_set[reg_set-1] =
kmalloc(pm_dbg_get_regset_size(), GFP_KERNEL);
if (pm_dbg_reg_set[reg_set-1] == NULL)
return -ENOMEM;
if (pm_dbg_dir != NULL) {
sprintf(name, "%d", reg_set);
(void) debugfs_create_file(name, S_IRUGO,
pm_dbg_dir, (void *)reg_set, &debug_reg_fops);
}
return 0;
}
static int pwrdm_suspend_get(void *data, u64 *val)
{
*val = omap3_pm_get_suspend_state((struct powerdomain *)data);
if (*val >= 0)
return 0;
return *val;
}
static int pwrdm_suspend_set(void *data, u64 val)
{
return omap3_pm_set_suspend_state((struct powerdomain *)data, (int)val);
}
DEFINE_SIMPLE_ATTRIBUTE(pwrdm_suspend_fops, pwrdm_suspend_get,
pwrdm_suspend_set, "%llu\n");
static int __init pwrdms_setup(struct powerdomain *pwrdm, void *dir)
{
int i;
s64 t;
struct dentry *d;
t = sched_clock();
for (i = 0; i < 4; i++)
pwrdm->state_timer[i] = 0;
pwrdm->timer = t;
if (strncmp(pwrdm->name, "dpll", 4) == 0)
return 0;
d = debugfs_create_dir(pwrdm->name, (struct dentry *)dir);
(void) debugfs_create_file("suspend", S_IRUGO|S_IWUSR, d,
(void *)pwrdm, &pwrdm_suspend_fops);
return 0;
}
static int __init pm_dbg_init(void)
{
int i;
struct dentry *d;
char name[2];
if (pm_dbg_init_done)
return 0;
if (cpu_is_omap34xx())
pm_dbg_reg_modules = omap3_pm_reg_modules;
else {
printk(KERN_ERR "%s: only OMAP3 supported\n", __func__);
return -ENODEV;
}
d = debugfs_create_dir("pm_debug", NULL);
if (IS_ERR(d))
return PTR_ERR(d);
(void) debugfs_create_file("count", S_IRUGO,
d, (void *)DEBUG_FILE_COUNTERS, &debug_fops);
(void) debugfs_create_file("time", S_IRUGO,
d, (void *)DEBUG_FILE_TIMERS, &debug_fops);
pwrdm_for_each(pwrdms_setup, (void *)d);
pm_dbg_dir = debugfs_create_dir("registers", d);
if (IS_ERR(pm_dbg_dir))
return PTR_ERR(pm_dbg_dir);
(void) debugfs_create_file("current", S_IRUGO,
pm_dbg_dir, (void *)0, &debug_reg_fops);
for (i = 0; i < PM_DBG_MAX_REG_SETS; i++)
if (pm_dbg_reg_set[i] != NULL) {
sprintf(name, "%d", i+1);
(void) debugfs_create_file(name, S_IRUGO,
pm_dbg_dir, (void *)(i+1), &debug_reg_fops);
}
pm_dbg_init_done = 1;
return 0;
}
arch_initcall(pm_dbg_init);
#else
void pm_dbg_update_time(struct powerdomain *pwrdm, int prev) {}
#endif
arch/arm/mach-omap2/pm.h
+11
View File
@@ -11,12 +11,23 @@
#ifndef __ARCH_ARM_MACH_OMAP2_PM_H
#define __ARCH_ARM_MACH_OMAP2_PM_H
#include <mach/powerdomain.h>
extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
#ifdef CONFIG_PM_DEBUG
extern void omap2_pm_dump(int mode, int resume, unsigned int us);
extern int omap2_pm_debug;
extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
extern int pm_dbg_regset_save(int reg_set);
extern int pm_dbg_regset_init(int reg_set);
#else
#define omap2_pm_dump(mode, resume, us) do {} while (0);
#define omap2_pm_debug 0
#define pm_dbg_update_time(pwrdm, prev) do {} while (0);
#define pm_dbg_regset_save(reg_set) do {} while (0);
#define pm_dbg_regset_init(reg_set) do {} while (0);
#endif /* CONFIG_PM_DEBUG */
extern void omap24xx_idle_loop_suspend(void);
arch/arm/mach-omap2/pm24xx.c
+2 -2
View File
@@ -333,7 +333,7 @@ static struct platform_suspend_ops omap_pm_ops = {
.valid = suspend_valid_only_mem,
};
static int _pm_clkdm_enable_hwsup(struct clockdomain *clkdm)
static int _pm_clkdm_enable_hwsup(struct clockdomain *clkdm, void *unused)
{
omap2_clkdm_allow_idle(clkdm);
return 0;
@@ -385,7 +385,7 @@ static void __init prcm_setup_regs(void)
omap2_clkdm_sleep(gfx_clkdm);
/* Enable clockdomain hardware-supervised control for all clkdms */
clkdm_for_each(_pm_clkdm_enable_hwsup);
clkdm_for_each(_pm_clkdm_enable_hwsup, NULL);
/* Enable clock autoidle for all domains */
cm_write_mod_reg(OMAP24XX_AUTO_CAM |
arch/arm/mach-omap2/pm34xx.c
+35 -5
View File
@@ -170,6 +170,8 @@ static void omap_sram_idle(void)
printk(KERN_ERR "Invalid mpu state in sram_idle\n");
return;
}
pwrdm_pre_transition();
omap2_gpio_prepare_for_retention();
omap_uart_prepare_idle(0);
omap_uart_prepare_idle(1);
@@ -182,6 +184,9 @@ static void omap_sram_idle(void)
omap_uart_resume_idle(1);
omap_uart_resume_idle(0);
omap2_gpio_resume_after_retention();
pwrdm_post_transition();
}
/*
@@ -271,6 +276,7 @@ static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
if (sleep_switch) {
omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
pwrdm_wait_transition(pwrdm);
pwrdm_state_switch(pwrdm);
}
err:
@@ -658,14 +664,38 @@ static void __init prcm_setup_regs(void)
omap3_d2d_idle();
}
static int __init pwrdms_setup(struct powerdomain *pwrdm)
int omap3_pm_get_suspend_state(struct powerdomain *pwrdm)
{
struct power_state *pwrst;
list_for_each_entry(pwrst, &pwrst_list, node) {
if (pwrst->pwrdm == pwrdm)
return pwrst->next_state;
}
return -EINVAL;
}
int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state)
{
struct power_state *pwrst;
list_for_each_entry(pwrst, &pwrst_list, node) {
if (pwrst->pwrdm == pwrdm) {
pwrst->next_state = state;
return 0;
}
}
return -EINVAL;
}
static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
{
struct power_state *pwrst;
if (!pwrdm->pwrsts)
return 0;
pwrst = kmalloc(sizeof(struct power_state), GFP_KERNEL);
pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC);
if (!pwrst)
return -ENOMEM;
pwrst->pwrdm = pwrdm;
@@ -683,7 +713,7 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm)
* supported. Initiate sleep transition for other clockdomains, if
* they are not used
*/
static int __init clkdms_setup(struct clockdomain *clkdm)
static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
{
if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
omap2_clkdm_allow_idle(clkdm);
@@ -716,13 +746,13 @@ static int __init omap3_pm_init(void)
goto err1;
}
ret = pwrdm_for_each(pwrdms_setup);
ret = pwrdm_for_each(pwrdms_setup, NULL);
if (ret) {
printk(KERN_ERR "Failed to setup powerdomains\n");
goto err2;
}
(void) clkdm_for_each(clkdms_setup);
(void) clkdm_for_each(clkdms_setup, NULL);
mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
if (mpu_pwrdm == NULL) {
arch/arm/mach-omap2/powerdomain.c
+108 -6
View File
@@ -35,6 +35,13 @@
#include <mach/powerdomain.h>
#include <mach/clockdomain.h>
#include "pm.h"
enum {
PWRDM_STATE_NOW = 0,
PWRDM_STATE_PREV,
};
/* pwrdm_list contains all registered struct powerdomains */
static LIST_HEAD(pwrdm_list);
@@ -83,7 +90,7 @@ static struct powerdomain *_pwrdm_deps_lookup(struct powerdomain *pwrdm,
if (!pwrdm || !deps || !omap_chip_is(pwrdm->omap_chip))
return ERR_PTR(-EINVAL);
for (pd = deps; pd; pd++) {
for (pd = deps; pd->pwrdm_name; pd++) {
if (!omap_chip_is(pd->omap_chip))
continue;
@@ -96,12 +103,71 @@ static struct powerdomain *_pwrdm_deps_lookup(struct powerdomain *pwrdm,
}
if (!pd)
if (!pd->pwrdm_name)
return ERR_PTR(-ENOENT);
return pd->pwrdm;
}
static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
{
int prev;
int state;
if (pwrdm == NULL)
return -EINVAL;
state = pwrdm_read_pwrst(pwrdm);
switch (flag) {
case PWRDM_STATE_NOW:
prev = pwrdm->state;
break;
case PWRDM_STATE_PREV:
prev = pwrdm_read_prev_pwrst(pwrdm);
if (pwrdm->state != prev)
pwrdm->state_counter[prev]++;
break;
default:
return -EINVAL;
}
if (state != prev)
pwrdm->state_counter[state]++;
pm_dbg_update_time(pwrdm, prev);
pwrdm->state = state;
return 0;
}
static int _pwrdm_pre_transition_cb(struct powerdomain *pwrdm, void *unused)
{
pwrdm_clear_all_prev_pwrst(pwrdm);
_pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW);
return 0;
}
static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused)
{
_pwrdm_state_switch(pwrdm, PWRDM_STATE_PREV);
return 0;
}
static __init void _pwrdm_setup(struct powerdomain *pwrdm)
{
int i;
for (i = 0; i < 4; i++)
pwrdm->state_counter[i] = 0;
pwrdm_wait_transition(pwrdm);
pwrdm->state = pwrdm_read_pwrst(pwrdm);
pwrdm->state_counter[pwrdm->state] = 1;
}
/* Public functions */
@@ -117,9 +183,12 @@ void pwrdm_init(struct powerdomain **pwrdm_list)
{
struct powerdomain **p = NULL;
if (pwrdm_list)
for (p = pwrdm_list; *p; p++)
if (pwrdm_list) {
for (p = pwrdm_list; *p; p++) {
pwrdm_register(*p);
_pwrdm_setup(*p);
}
}
}
/**
@@ -217,7 +286,8 @@ struct powerdomain *pwrdm_lookup(const char *name)
* anything else to indicate failure; or -EINVAL if the function
* pointer is null.
*/
int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm))
int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
void *user)
{
struct powerdomain *temp_pwrdm;
unsigned long flags;
@@ -228,7 +298,7 @@ int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm))
read_lock_irqsave(&pwrdm_rwlock, flags);
list_for_each_entry(temp_pwrdm, &pwrdm_list, node) {
ret = (*fn)(temp_pwrdm);
ret = (*fn)(temp_pwrdm, user);
if (ret)
break;
}
@@ -1110,4 +1180,36 @@ int pwrdm_wait_transition(struct powerdomain *pwrdm)
return 0;
}
int pwrdm_state_switch(struct powerdomain *pwrdm)
{
return _pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW);
}
int pwrdm_clkdm_state_switch(struct clockdomain *clkdm)
{
if (clkdm != NULL && clkdm->pwrdm.ptr != NULL) {
pwrdm_wait_transition(clkdm->pwrdm.ptr);
return pwrdm_state_switch(clkdm->pwrdm.ptr);
}
return -EINVAL;
}
int pwrdm_clk_state_switch(struct clk *clk)
{
if (clk != NULL && clk->clkdm != NULL)
return pwrdm_clkdm_state_switch(clk->clkdm);
return -EINVAL;
}
int pwrdm_pre_transition(void)
{
pwrdm_for_each(_pwrdm_pre_transition_cb, NULL);
return 0;
}
int pwrdm_post_transition(void)
{
pwrdm_for_each(_pwrdm_post_transition_cb, NULL);
return 0;
}
arch/arm/mach-omap2/prm.h
+3 -3
View File
@@ -17,11 +17,11 @@
#include "prcm-common.h"
#define OMAP2420_PRM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
#define OMAP2430_PRM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
#define OMAP34XX_PRM_REGADDR(module, reg) \
IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
/*
* Architecture-specific global PRM registers
arch/arm/mach-omap2/sdrc.h
+3 -3
View File
@@ -48,9 +48,9 @@ static inline u32 sms_read_reg(u16 reg)
return __raw_readl(OMAP_SMS_REGADDR(reg));
}
#else
#define OMAP242X_SDRC_REGADDR(reg) IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
#define OMAP243X_SDRC_REGADDR(reg) IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
#define OMAP34XX_SDRC_REGADDR(reg) IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
#define OMAP242X_SDRC_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
#define OMAP243X_SDRC_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
#define OMAP34XX_SDRC_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
#endif /* __ASSEMBLER__ */
#endif
arch/arm/mach-omap2/serial.c
+48 -19
View File
@@ -73,7 +73,7 @@ static LIST_HEAD(uart_list);
static struct plat_serial8250_port serial_platform_data0[] = {
{
.membase = IO_ADDRESS(OMAP_UART1_BASE),
.membase = OMAP2_IO_ADDRESS(OMAP_UART1_BASE),
.mapbase = OMAP_UART1_BASE,
.irq = 72,
.flags = UPF_BOOT_AUTOCONF,
@@ -87,7 +87,7 @@ static struct plat_serial8250_port serial_platform_data0[] = {
static struct plat_serial8250_port serial_platform_data1[] = {
{
.membase = IO_ADDRESS(OMAP_UART2_BASE),
.membase = OMAP2_IO_ADDRESS(OMAP_UART2_BASE),
.mapbase = OMAP_UART2_BASE,
.irq = 73,
.flags = UPF_BOOT_AUTOCONF,
@@ -101,7 +101,7 @@ static struct plat_serial8250_port serial_platform_data1[] = {
static struct plat_serial8250_port serial_platform_data2[] = {
{
.membase = IO_ADDRESS(OMAP_UART3_BASE),
.membase = OMAP2_IO_ADDRESS(OMAP_UART3_BASE),
.mapbase = OMAP_UART3_BASE,
.irq = 74,
.flags = UPF_BOOT_AUTOCONF,
@@ -123,6 +123,21 @@ static struct plat_serial8250_port serial_platform_data2[] = {
}
};
#ifdef CONFIG_ARCH_OMAP4
static struct plat_serial8250_port serial_platform_data3[] = {
{
.membase = IO_ADDRESS(OMAP_UART4_BASE),
.mapbase = OMAP_UART4_BASE,
.irq = 70,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
.flags = 0
}
};
#endif
static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
int offset)
{
@@ -470,7 +485,7 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
uart->padconf = 0;
}
p->flags |= UPF_SHARE_IRQ;
p->irqflags |= IRQF_SHARED;
ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
"serial idle", (void *)uart);
WARN_ON(ret);
@@ -560,12 +575,22 @@ static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
},
},
},
#ifdef CONFIG_ARCH_OMAP4
{
.pdev = {
.name = "serial8250",
.id = 3
.dev = {
.platform_data = serial_platform_data3,
},
},
},
#endif
};
void __init omap_serial_init(void)
void __init omap_serial_early_init(void)
{
int i;
const struct omap_uart_config *info;
char name[16];
/*
@@ -574,23 +599,12 @@ void __init omap_serial_init(void)
* if not needed.
*/
info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
if (info == NULL)
return;
for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
struct omap_uart_state *uart = &omap_uart[i];
struct platform_device *pdev = &uart->pdev;
struct device *dev = &pdev->dev;
struct plat_serial8250_port *p = dev->platform_data;
if (!(info->enabled_uarts & (1 << i))) {
p->membase = NULL;
p->mapbase = 0;
continue;
}
sprintf(name, "uart%d_ick", i+1);
uart->ick = clk_get(NULL, name);
if (IS_ERR(uart->ick)) {
@@ -605,8 +619,11 @@ void __init omap_serial_init(void)
uart->fck = NULL;
}
if (!uart->ick || !uart->fck)
continue;
/* FIXME: Remove this once the clkdev is ready */
if (!cpu_is_omap44xx()) {
if (!uart->ick || !uart->fck)
continue;
}
uart->num = i;
p->private_data = uart;
@@ -617,6 +634,18 @@ void __init omap_serial_init(void)
p->irq += 32;
omap_uart_enable_clocks(uart);
}
}
void __init omap_serial_init(void)
{
int i;
for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
struct omap_uart_state *uart = &omap_uart[i];
struct platform_device *pdev = &uart->pdev;
struct device *dev = &pdev->dev;
omap_uart_reset(uart);
omap_uart_idle_init(uart);
arch/arm/mach-omap2/sram242x.S
+2 -2
View File
@@ -128,7 +128,7 @@ omap242x_sdi_prcm_voltctrl:
prcm_mask_val:
.word 0xFFFF3FFC
omap242x_sdi_timer_32ksynct_cr:
.word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
.word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
ENTRY(omap242x_sram_ddr_init_sz)
.word . - omap242x_sram_ddr_init
@@ -224,7 +224,7 @@ omap242x_srs_prcm_voltctrl:
ddr_prcm_mask_val:
.word 0xFFFF3FFC
omap242x_srs_timer_32ksynct:
.word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
.word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
ENTRY(omap242x_sram_reprogram_sdrc_sz)
.word . - omap242x_sram_reprogram_sdrc
arch/arm/mach-omap2/sram243x.S
+2 -2
View File
@@ -128,7 +128,7 @@ omap243x_sdi_prcm_voltctrl:
prcm_mask_val:
.word 0xFFFF3FFC
omap243x_sdi_timer_32ksynct_cr:
.word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
.word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
ENTRY(omap243x_sram_ddr_init_sz)
.word . - omap243x_sram_ddr_init
@@ -224,7 +224,7 @@ omap243x_srs_prcm_voltctrl:
ddr_prcm_mask_val:
.word 0xFFFF3FFC
omap243x_srs_timer_32ksynct:
.word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
.word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
ENTRY(omap243x_sram_reprogram_sdrc_sz)
.word . - omap243x_sram_reprogram_sdrc
arch/arm/mach-omap2/timer-gp.c
+1 -1
View File
@@ -231,7 +231,7 @@ static void __init omap2_gp_clocksource_init(void)
static void __init omap2_gp_timer_init(void)
{
#ifdef CONFIG_LOCAL_TIMERS
twd_base = IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE);
twd_base = OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE);
#endif
omap_dm_timer_init();
arch/arm/mach-omap2/usb-musb.c
-12
View File
@@ -31,15 +31,6 @@
#include <mach/mux.h>
#include <mach/usb.h>
#define OTG_SYSCONFIG (OMAP34XX_HSUSB_OTG_BASE + 0x404)
static void __init usb_musb_pm_init(void)
{
/* Ensure force-idle mode for OTG controller */
if (cpu_is_omap34xx())
omap_writel(0, OTG_SYSCONFIG);
}
#ifdef CONFIG_USB_MUSB_SOC
static struct resource musb_resources[] = {
@@ -173,13 +164,10 @@ void __init usb_musb_init(void)
printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
return;
}
usb_musb_pm_init();
}
#else
void __init usb_musb_init(void)
{
usb_musb_pm_init();
}
#endif /* CONFIG_USB_MUSB_SOC */
arch/arm/plat-omap/Kconfig
+17
View File
@@ -120,6 +120,10 @@ config OMAP_MBOX_FWK
config OMAP_IOMMU
tristate
config OMAP_IOMMU_DEBUG
depends on OMAP_IOMMU
tristate
choice
prompt "System timer"
default OMAP_MPU_TIMER
@@ -183,6 +187,19 @@ config OMAP_SERIAL_WAKE
to data on the serial RX line. This allows you to wake the
system from serial console.
choice
prompt "OMAP PM layer selection"
depends on ARCH_OMAP
default OMAP_PM_NOOP
config OMAP_PM_NONE
bool "No PM layer"
config OMAP_PM_NOOP
bool "No-op/debug PM layer"
endchoice
endmenu
endif
arch/arm/plat-omap/Makefile
+6
View File
@@ -12,8 +12,13 @@ obj- :=
# OCPI interconnect support for 1710, 1610 and 5912
obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
# omap_device support (OMAP2+ only at the moment)
obj-$(CONFIG_ARCH_OMAP2) += omap_device.o
obj-$(CONFIG_ARCH_OMAP3) += omap_device.o
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o
obj-$(CONFIG_OMAP_IOMMU_DEBUG) += iommu-debug.o
obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
@@ -25,3 +30,4 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y)
# OMAP mailbox framework
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
arch/arm/plat-omap/clock.c
+1 -1
View File
@@ -488,7 +488,7 @@ static int __init clk_debugfs_init(void)
}
return 0;
err_out:
debugfs_remove(clk_debugfs_root); /* REVISIT: Cleanup correctly */
debugfs_remove_recursive(clk_debugfs_root);
return err;
}
late_initcall(clk_debugfs_init);
arch/arm/plat-omap/common.c
-88
View File
@@ -54,50 +54,6 @@ static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out)
struct omap_board_config_kernel *kinfo = NULL;
int i;
#ifdef CONFIG_OMAP_BOOT_TAG
struct omap_board_config_entry *info = NULL;
if (omap_bootloader_tag_len > 4)
info = (struct omap_board_config_entry *) omap_bootloader_tag;
while (info != NULL) {
u8 *next;
if (info->tag == tag) {
if (skip == 0)
break;
skip--;
}
if ((info->len & 0x03) != 0) {
/* We bail out to avoid an alignment fault */
printk(KERN_ERR "OMAP peripheral config: Length (%d) not word-aligned (tag %04x)\n",
info->len, info->tag);
return NULL;
}
next = (u8 *) info + sizeof(*info) + info->len;
if (next >= omap_bootloader_tag + omap_bootloader_tag_len)
info = NULL;
else
info = (struct omap_board_config_entry *) next;
}
if (info != NULL) {
/* Check the length as a lame attempt to check for
* binary inconsistency. */
if (len != NO_LENGTH_CHECK) {
/* Word-align len */
if (len & 0x03)
len = (len + 3) & ~0x03;
if (info->len != len) {
printk(KERN_ERR "OMAP peripheral config: Length mismatch with tag %x (want %d, got %d)\n",
tag, len, info->len);
return NULL;
}
}
if (len_out != NULL)
*len_out = info->len;
return info->data;
}
#endif
/* Try to find the config from the board-specific structures
* in the kernel. */
for (i = 0; i < omap_board_config_size; i++) {
@@ -127,50 +83,6 @@ const void *omap_get_var_config(u16 tag, size_t *len)
}
EXPORT_SYMBOL(omap_get_var_config);
static int __init omap_add_serial_console(void)
{
const struct omap_serial_console_config *con_info;
const struct omap_uart_config *uart_info;
static char speed[11], *opt = NULL;
int line, i, uart_idx;
uart_info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
con_info = omap_get_config(OMAP_TAG_SERIAL_CONSOLE,
struct omap_serial_console_config);
if (uart_info == NULL || con_info == NULL)
return 0;
if (con_info->console_uart == 0)
return 0;
if (con_info->console_speed) {
snprintf(speed, sizeof(speed), "%u", con_info->console_speed);
opt = speed;
}
uart_idx = con_info->console_uart - 1;
if (uart_idx >= OMAP_MAX_NR_PORTS) {
printk(KERN_INFO "Console: external UART#%d. "
"Not adding it as console this time.\n",
uart_idx + 1);
return 0;
}
if (!(uart_info->enabled_uarts & (1 << uart_idx))) {
printk(KERN_ERR "Console: Selected UART#%d is "
"not enabled for this platform\n",
uart_idx + 1);
return -1;
}
line = 0;
for (i = 0; i < uart_idx; i++) {
if (uart_info->enabled_uarts & (1 << i))
line++;
}
return add_preferred_console("ttyS", line, opt);
}
console_initcall(omap_add_serial_console);
/*
* 32KHz clocksource ... always available, on pretty most chips except
* OMAP 730 and 1510. Other timers could be used as clocksources, with
arch/arm/plat-omap/dma.c
+4 -4
View File
@@ -2347,16 +2347,16 @@ static int __init omap_init_dma(void)
int ch, r;
if (cpu_class_is_omap1()) {
omap_dma_base = IO_ADDRESS(OMAP1_DMA_BASE);
omap_dma_base = OMAP1_IO_ADDRESS(OMAP1_DMA_BASE);
dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
} else if (cpu_is_omap24xx()) {
omap_dma_base = IO_ADDRESS(OMAP24XX_DMA4_BASE);
omap_dma_base = OMAP2_IO_ADDRESS(OMAP24XX_DMA4_BASE);
dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
} else if (cpu_is_omap34xx()) {
omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE);
omap_dma_base = OMAP2_IO_ADDRESS(OMAP34XX_DMA4_BASE);
dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
} else if (cpu_is_omap44xx()) {
omap_dma_base = IO_ADDRESS(OMAP44XX_DMA4_BASE);
omap_dma_base = OMAP2_IO_ADDRESS(OMAP44XX_DMA4_BASE);
dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
} else {
pr_err("DMA init failed for unsupported omap\n");
arch/arm/plat-omap/dmtimer.c
+4 -1
View File
@@ -774,7 +774,10 @@ int __init omap_dm_timer_init(void)
for (i = 0; i < dm_timer_count; i++) {
timer = &dm_timers[i];
timer->io_base = IO_ADDRESS(timer->phys_base);
if (cpu_class_is_omap1())
timer->io_base = OMAP1_IO_ADDRESS(timer->phys_base);
else
timer->io_base = OMAP2_IO_ADDRESS(timer->phys_base);
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
if (cpu_class_is_omap2()) {
arch/arm/plat-omap/gpio.c
+67 -48
View File
@@ -31,7 +31,7 @@
/*
* OMAP1510 GPIO registers
*/
#define OMAP1510_GPIO_BASE IO_ADDRESS(0xfffce000)
#define OMAP1510_GPIO_BASE OMAP1_IO_ADDRESS(0xfffce000)
#define OMAP1510_GPIO_DATA_INPUT 0x00
#define OMAP1510_GPIO_DATA_OUTPUT 0x04
#define OMAP1510_GPIO_DIR_CONTROL 0x08
@@ -45,10 +45,10 @@
/*
* OMAP1610 specific GPIO registers
*/
#define OMAP1610_GPIO1_BASE IO_ADDRESS(0xfffbe400)
#define OMAP1610_GPIO2_BASE IO_ADDRESS(0xfffbec00)
#define OMAP1610_GPIO3_BASE IO_ADDRESS(0xfffbb400)
#define OMAP1610_GPIO4_BASE IO_ADDRESS(0xfffbbc00)
#define OMAP1610_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbe400)
#define OMAP1610_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbec00)
#define OMAP1610_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbb400)
#define OMAP1610_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbbc00)
#define OMAP1610_GPIO_REVISION 0x0000
#define OMAP1610_GPIO_SYSCONFIG 0x0010
#define OMAP1610_GPIO_SYSSTATUS 0x0014
@@ -70,12 +70,12 @@
/*
* OMAP730 specific GPIO registers
*/
#define OMAP730_GPIO1_BASE IO_ADDRESS(0xfffbc000)
#define OMAP730_GPIO2_BASE IO_ADDRESS(0xfffbc800)
#define OMAP730_GPIO3_BASE IO_ADDRESS(0xfffbd000)
#define OMAP730_GPIO4_BASE IO_ADDRESS(0xfffbd800)
#define OMAP730_GPIO5_BASE IO_ADDRESS(0xfffbe000)
#define OMAP730_GPIO6_BASE IO_ADDRESS(0xfffbe800)
#define OMAP730_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000)
#define OMAP730_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800)
#define OMAP730_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000)
#define OMAP730_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800)
#define OMAP730_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000)
#define OMAP730_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800)
#define OMAP730_GPIO_DATA_INPUT 0x00
#define OMAP730_GPIO_DATA_OUTPUT 0x04
#define OMAP730_GPIO_DIR_CONTROL 0x08
@@ -86,12 +86,12 @@
/*
* OMAP850 specific GPIO registers
*/
#define OMAP850_GPIO1_BASE IO_ADDRESS(0xfffbc000)
#define OMAP850_GPIO2_BASE IO_ADDRESS(0xfffbc800)
#define OMAP850_GPIO3_BASE IO_ADDRESS(0xfffbd000)
#define OMAP850_GPIO4_BASE IO_ADDRESS(0xfffbd800)
#define OMAP850_GPIO5_BASE IO_ADDRESS(0xfffbe000)
#define OMAP850_GPIO6_BASE IO_ADDRESS(0xfffbe800)
#define OMAP850_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000)
#define OMAP850_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800)
#define OMAP850_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000)
#define OMAP850_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800)
#define OMAP850_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000)
#define OMAP850_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800)
#define OMAP850_GPIO_DATA_INPUT 0x00
#define OMAP850_GPIO_DATA_OUTPUT 0x04
#define OMAP850_GPIO_DIR_CONTROL 0x08
@@ -99,19 +99,21 @@
#define OMAP850_GPIO_INT_MASK 0x10
#define OMAP850_GPIO_INT_STATUS 0x14
#define OMAP1_MPUIO_VBASE OMAP1_IO_ADDRESS(OMAP1_MPUIO_BASE)
/*
* omap24xx specific GPIO registers
*/
#define OMAP242X_GPIO1_BASE IO_ADDRESS(0x48018000)
#define OMAP242X_GPIO2_BASE IO_ADDRESS(0x4801a000)
#define OMAP242X_GPIO3_BASE IO_ADDRESS(0x4801c000)
#define OMAP242X_GPIO4_BASE IO_ADDRESS(0x4801e000)
#define OMAP242X_GPIO1_BASE OMAP2_IO_ADDRESS(0x48018000)
#define OMAP242X_GPIO2_BASE OMAP2_IO_ADDRESS(0x4801a000)
#define OMAP242X_GPIO3_BASE OMAP2_IO_ADDRESS(0x4801c000)
#define OMAP242X_GPIO4_BASE OMAP2_IO_ADDRESS(0x4801e000)
#define OMAP243X_GPIO1_BASE IO_ADDRESS(0x4900C000)
#define OMAP243X_GPIO2_BASE IO_ADDRESS(0x4900E000)
#define OMAP243X_GPIO3_BASE IO_ADDRESS(0x49010000)
#define OMAP243X_GPIO4_BASE IO_ADDRESS(0x49012000)
#define OMAP243X_GPIO5_BASE IO_ADDRESS(0x480B6000)
#define OMAP243X_GPIO1_BASE OMAP2_IO_ADDRESS(0x4900C000)
#define OMAP243X_GPIO2_BASE OMAP2_IO_ADDRESS(0x4900E000)
#define OMAP243X_GPIO3_BASE OMAP2_IO_ADDRESS(0x49010000)
#define OMAP243X_GPIO4_BASE OMAP2_IO_ADDRESS(0x49012000)
#define OMAP243X_GPIO5_BASE OMAP2_IO_ADDRESS(0x480B6000)
#define OMAP24XX_GPIO_REVISION 0x0000
#define OMAP24XX_GPIO_SYSCONFIG 0x0010
@@ -168,24 +170,22 @@
* omap34xx specific GPIO registers
*/
#define OMAP34XX_GPIO1_BASE IO_ADDRESS(0x48310000)
#define OMAP34XX_GPIO2_BASE IO_ADDRESS(0x49050000)
#define OMAP34XX_GPIO3_BASE IO_ADDRESS(0x49052000)
#define OMAP34XX_GPIO4_BASE IO_ADDRESS(0x49054000)
#define OMAP34XX_GPIO5_BASE IO_ADDRESS(0x49056000)
#define OMAP34XX_GPIO6_BASE IO_ADDRESS(0x49058000)
#define OMAP34XX_GPIO1_BASE OMAP2_IO_ADDRESS(0x48310000)
#define OMAP34XX_GPIO2_BASE OMAP2_IO_ADDRESS(0x49050000)
#define OMAP34XX_GPIO3_BASE OMAP2_IO_ADDRESS(0x49052000)
#define OMAP34XX_GPIO4_BASE OMAP2_IO_ADDRESS(0x49054000)
#define OMAP34XX_GPIO5_BASE OMAP2_IO_ADDRESS(0x49056000)
#define OMAP34XX_GPIO6_BASE OMAP2_IO_ADDRESS(0x49058000)
/*
* OMAP44XX specific GPIO registers
*/
#define OMAP44XX_GPIO1_BASE IO_ADDRESS(0x4a310000)
#define OMAP44XX_GPIO2_BASE IO_ADDRESS(0x48055000)
#define OMAP44XX_GPIO3_BASE IO_ADDRESS(0x48057000)
#define OMAP44XX_GPIO4_BASE IO_ADDRESS(0x48059000)
#define OMAP44XX_GPIO5_BASE IO_ADDRESS(0x4805B000)
#define OMAP44XX_GPIO6_BASE IO_ADDRESS(0x4805D000)
#define OMAP_MPUIO_VBASE IO_ADDRESS(OMAP_MPUIO_BASE)
#define OMAP44XX_GPIO1_BASE OMAP2_IO_ADDRESS(0x4a310000)
#define OMAP44XX_GPIO2_BASE OMAP2_IO_ADDRESS(0x48055000)
#define OMAP44XX_GPIO3_BASE OMAP2_IO_ADDRESS(0x48057000)
#define OMAP44XX_GPIO4_BASE OMAP2_IO_ADDRESS(0x48059000)
#define OMAP44XX_GPIO5_BASE OMAP2_IO_ADDRESS(0x4805B000)
#define OMAP44XX_GPIO6_BASE OMAP2_IO_ADDRESS(0x4805D000)
struct gpio_bank {
void __iomem *base;
@@ -221,7 +221,7 @@ struct gpio_bank {
#ifdef CONFIG_ARCH_OMAP16XX
static struct gpio_bank gpio_bank_1610[5] = {
{ OMAP_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO},
{ OMAP1_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO},
{ OMAP1610_GPIO1_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1610 },
{ OMAP1610_GPIO2_BASE, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, METHOD_GPIO_1610 },
{ OMAP1610_GPIO3_BASE, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, METHOD_GPIO_1610 },
@@ -231,14 +231,14 @@ static struct gpio_bank gpio_bank_1610[5] = {
#ifdef CONFIG_ARCH_OMAP15XX
static struct gpio_bank gpio_bank_1510[2] = {
{ OMAP_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
{ OMAP1_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
{ OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1510 }
};
#endif
#ifdef CONFIG_ARCH_OMAP730
static struct gpio_bank gpio_bank_730[7] = {
{ OMAP_MPUIO_VBASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
{ OMAP1_MPUIO_VBASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
{ OMAP730_GPIO1_BASE, INT_730_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 },
{ OMAP730_GPIO2_BASE, INT_730_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_730 },
{ OMAP730_GPIO3_BASE, INT_730_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_730 },
@@ -250,7 +250,7 @@ static struct gpio_bank gpio_bank_730[7] = {
#ifdef CONFIG_ARCH_OMAP850
static struct gpio_bank gpio_bank_850[7] = {
{ OMAP_MPUIO_BASE, INT_850_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
{ OMAP1_MPUIO_BASE, INT_850_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
{ OMAP850_GPIO1_BASE, INT_850_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_850 },
{ OMAP850_GPIO2_BASE, INT_850_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_850 },
{ OMAP850_GPIO3_BASE, INT_850_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_850 },
@@ -2032,7 +2032,7 @@ void omap2_gpio_resume_after_retention(void)
return;
for (i = 0; i < gpio_bank_count; i++) {
struct gpio_bank *bank = &gpio_bank[i];
u32 l;
u32 l, gen, gen0, gen1;
if (!(bank->enabled_non_wakeup_gpios))
continue;
@@ -2056,13 +2056,32 @@ void omap2_gpio_resume_after_retention(void)
* this silicon bug. */
l ^= bank->saved_datain;
l &= bank->non_wakeup_gpios;
if (l) {
/*
* No need to generate IRQs for the rising edge for gpio IRQs
* configured with falling edge only; and vice versa.
*/
gen0 = l & bank->saved_fallingdetect;
gen0 &= bank->saved_datain;
gen1 = l & bank->saved_risingdetect;
gen1 &= ~(bank->saved_datain);
/* FIXME: Consider GPIO IRQs with level detections properly! */
gen = l & (~(bank->saved_fallingdetect) &
~(bank->saved_risingdetect));
/* Consider all GPIO IRQs needed to be updated */
gen |= gen0 | gen1;
if (gen) {
u32 old0, old1;
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
__raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
__raw_writel(old1 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
__raw_writel(old0 | gen, bank->base +
OMAP24XX_GPIO_LEVELDETECT0);
__raw_writel(old1 | gen, bank->base +
OMAP24XX_GPIO_LEVELDETECT1);
__raw_writel(old0, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
__raw_writel(old1, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
#endif
arch/arm/plat-omap/include/mach/board.h
-2
View File
@@ -16,10 +16,8 @@
/* Different peripheral ids */
#define OMAP_TAG_CLOCK 0x4f01
#define OMAP_TAG_SERIAL_CONSOLE 0x4f03
#define OMAP_TAG_LCD 0x4f05
#define OMAP_TAG_GPIO_SWITCH 0x4f06
#define OMAP_TAG_UART 0x4f07
#define OMAP_TAG_FBMEM 0x4f08
#define OMAP_TAG_STI_CONSOLE 0x4f09
#define OMAP_TAG_CAMERA_SENSOR 0x4f0a
arch/arm/plat-omap/include/mach/clockdomain.h
+2 -1
View File
@@ -95,7 +95,8 @@ int clkdm_register(struct clockdomain *clkdm);
int clkdm_unregister(struct clockdomain *clkdm);
struct clockdomain *clkdm_lookup(const char *name);
int clkdm_for_each(int (*fn)(struct clockdomain *clkdm));
int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user),
void *user);
struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm);
void omap2_clkdm_allow_idle(struct clockdomain *clkdm);
arch/arm/plat-omap/include/mach/control.h
+6 -6
View File
@@ -20,15 +20,15 @@
#ifndef __ASSEMBLY__
#define OMAP242X_CTRL_REGADDR(reg) \
IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
#define OMAP243X_CTRL_REGADDR(reg) \
IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
#define OMAP343X_CTRL_REGADDR(reg) \
IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
#else
#define OMAP242X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
#define OMAP243X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
#define OMAP343X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
#define OMAP242X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
#define OMAP243X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
#define OMAP343X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
#endif /* __ASSEMBLY__ */
/*
arch/arm/plat-omap/include/mach/entry-macro.S
+4 -4
View File
@@ -41,7 +41,7 @@
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \base, =IO_ADDRESS(OMAP_IH1_BASE)
ldr \base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
ldr \irqnr, [\base, #IRQ_ITR_REG_OFFSET]
ldr \tmp, [\base, #IRQ_MIR_REG_OFFSET]
mov \irqstat, #0xffffffff
@@ -53,7 +53,7 @@
cmp \irqnr, #0
ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
cmpeq \irqnr, #INT_IH2_IRQ
ldreq \base, =IO_ADDRESS(OMAP_IH2_BASE)
ldreq \base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE)
ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
addeqs \irqnr, \irqnr, #32
1510:
@@ -68,9 +68,9 @@
/* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
#if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE)
#define OMAP2_VA_IC_BASE OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE)
#elif defined(CONFIG_ARCH_OMAP34XX)
#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP34XX_IC_BASE)
#define OMAP2_VA_IC_BASE OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE)
#endif
#if defined(CONFIG_ARCH_OMAP4)
#include <mach/omap44xx.h>
arch/arm/plat-omap/include/mach/gpio.h
+1 -1
View File
@@ -29,7 +29,7 @@
#include <linux/io.h>
#include <mach/irqs.h>
#define OMAP_MPUIO_BASE 0xfffb5000
#define OMAP1_MPUIO_BASE 0xfffb5000
#if (defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850))
arch/arm/plat-omap/include/mach/io.h
+48 -49
View File
@@ -54,17 +54,33 @@
* ----------------------------------------------------------------------------
*/
#if defined(CONFIG_ARCH_OMAP1)
#ifdef __ASSEMBLER__
#define IOMEM(x) (x)
#else
#define IOMEM(x) ((void __force __iomem *)(x))
#endif
#define IO_PHYS 0xFFFB0000
#define IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
#define IO_SIZE 0x40000
#define IO_VIRT (IO_PHYS - IO_OFFSET)
#define __IO_ADDRESS(pa) ((pa) - IO_OFFSET)
#define __OMAP1_IO_ADDRESS(pa) ((pa) - IO_OFFSET)
#define io_v2p(va) ((va) + IO_OFFSET)
#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET)
#elif defined(CONFIG_ARCH_OMAP2)
#define OMAP2_IO_OFFSET 0x90000000
#define OMAP2_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_IO_OFFSET) /* L3 and L4 */
/*
* ----------------------------------------------------------------------------
* Omap1 specific IO mapping
* ----------------------------------------------------------------------------
*/
#define OMAP1_IO_PHYS 0xFFFB0000
#define OMAP1_IO_SIZE 0x40000
#define OMAP1_IO_VIRT (OMAP1_IO_PHYS - OMAP1_IO_OFFSET)
/*
* ----------------------------------------------------------------------------
* Omap2 specific IO mapping
* ----------------------------------------------------------------------------
*/
/* We map both L3 and L4 on OMAP2 */
#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 */
@@ -87,11 +103,6 @@
#define OMAP243X_SMS_VIRT 0xFC000000
#define OMAP243X_SMS_SIZE SZ_1M
#define IO_OFFSET 0x90000000
#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
#define io_v2p(va) ((va) - IO_OFFSET) /* Works for L3 and L4 */
/* DSP */
#define DSP_MEM_24XX_PHYS OMAP2420_DSP_MEM_BASE /* 0x58000000 */
#define DSP_MEM_24XX_VIRT 0xe0000000
@@ -103,7 +114,11 @@
#define DSP_MMU_24XX_VIRT 0xe2000000
#define DSP_MMU_24XX_SIZE SZ_4K
#elif defined(CONFIG_ARCH_OMAP3)
/*
* ----------------------------------------------------------------------------
* Omap3 specific IO mapping
* ----------------------------------------------------------------------------
*/
/* We map both L3 and L4 on OMAP3 */
#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 */
@@ -143,12 +158,6 @@
#define OMAP343X_SDRC_VIRT 0xFD000000
#define OMAP343X_SDRC_SIZE SZ_1M
#define IO_OFFSET 0x90000000
#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
#define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */
/* DSP */
#define DSP_MEM_34XX_PHYS OMAP34XX_DSP_MEM_BASE /* 0x58000000 */
#define DSP_MEM_34XX_VIRT 0xe0000000
@@ -160,8 +169,12 @@
#define DSP_MMU_34XX_VIRT 0xe2000000
#define DSP_MMU_34XX_SIZE SZ_4K
/*
* ----------------------------------------------------------------------------
* Omap4 specific IO mapping
* ----------------------------------------------------------------------------
*/
#elif defined(CONFIG_ARCH_OMAP4)
/* We map both L3 and L4 on OMAP4 */
#define L3_44XX_PHYS L3_44XX_BASE
#define L3_44XX_VIRT 0xd4000000
@@ -189,38 +202,24 @@
#define OMAP44XX_GPMC_SIZE SZ_1M
#define IO_OFFSET 0x90000000
#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
#define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */
/*
* ----------------------------------------------------------------------------
* Omap specific register access
* ----------------------------------------------------------------------------
*/
#endif
#define IO_ADDRESS(pa) IOMEM(__IO_ADDRESS(pa))
#define OMAP1_IO_ADDRESS(pa) IOMEM(__OMAP1_IO_ADDRESS(pa))
#define OMAP2_IO_ADDRESS(pa) IOMEM(__OMAP2_IO_ADDRESS(pa))
#ifdef __ASSEMBLER__
#define IOMEM(x) (x)
#else
#define IOMEM(x) ((void __force __iomem *)(x))
#ifndef __ASSEMBLER__
/*
* Functions to access the OMAP IO region
*
* NOTE: - Use omap_read/write[bwl] for physical register addresses
* - Use __raw_read/write[bwl]() for virtual register addresses
* - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
* - DO NOT use hardcoded virtual addresses to allow changing the
* IO address space again if needed
* NOTE: Please use ioremap + __raw_read/write where possible instead of these
*/
#define omap_readb(a) __raw_readb(IO_ADDRESS(a))
#define omap_readw(a) __raw_readw(IO_ADDRESS(a))
#define omap_readl(a) __raw_readl(IO_ADDRESS(a))
#define omap_writeb(v,a) __raw_writeb(v, IO_ADDRESS(a))
#define omap_writew(v,a) __raw_writew(v, IO_ADDRESS(a))
#define omap_writel(v,a) __raw_writel(v, IO_ADDRESS(a))
extern u8 omap_readb(u32 pa);
extern u16 omap_readw(u32 pa);
extern u32 omap_readl(u32 pa);
extern void omap_writeb(u8 v, u32 pa);
extern void omap_writew(u16 v, u32 pa);
extern void omap_writel(u32 v, u32 pa);
struct omap_sdrc_params;
arch/arm/plat-omap/include/mach/iommu.h
+3 -3
View File
@@ -95,7 +95,7 @@ struct iommu_functions {
void (*save_ctx)(struct iommu *obj);
void (*restore_ctx)(struct iommu *obj);
ssize_t (*dump_ctx)(struct iommu *obj, char *buf);
ssize_t (*dump_ctx)(struct iommu *obj, char *buf, ssize_t len);
};
struct iommu_platform_data {
@@ -162,7 +162,7 @@ extern void uninstall_iommu_arch(const struct iommu_functions *ops);
extern int foreach_iommu_device(void *data,
int (*fn)(struct device *, void *));
extern ssize_t iommu_dump_ctx(struct iommu *obj, char *buf);
extern size_t dump_tlb_entries(struct iommu *obj, char *buf);
extern ssize_t iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t len);
extern size_t dump_tlb_entries(struct iommu *obj, char *buf, ssize_t len);
#endif /* __MACH_IOMMU_H */
arch/arm/plat-omap/include/mach/mtd-xip.h
+1 -1
View File
@@ -25,7 +25,7 @@ typedef struct {
} xip_omap_mpu_timer_regs_t;
#define xip_omap_mpu_timer_base(n) \
((volatile xip_omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE + \
((volatile xip_omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE + \
(n)*OMAP_MPU_TIMER_OFFSET))
static inline unsigned long xip_omap_mpu_timer_read(int nr)
arch/arm/plat-omap/include/mach/mux.h
+31
View File
@@ -857,6 +857,37 @@ enum omap34xx_index {
/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */
H16_34XX_SDRC_CKE0,
H17_34XX_SDRC_CKE1,
/* MMC1 */
N28_3430_MMC1_CLK,
M27_3430_MMC1_CMD,
N27_3430_MMC1_DAT0,
N26_3430_MMC1_DAT1,
N25_3430_MMC1_DAT2,
P28_3430_MMC1_DAT3,
P27_3430_MMC1_DAT4,
P26_3430_MMC1_DAT5,
R27_3430_MMC1_DAT6,
R25_3430_MMC1_DAT7,
/* MMC2 */
AE2_3430_MMC2_CLK,
AG5_3430_MMC2_CMD,
AH5_3430_MMC2_DAT0,
AH4_3430_MMC2_DAT1,
AG4_3430_MMC2_DAT2,
AF4_3430_MMC2_DAT3,
/* MMC3 */
AF10_3430_MMC3_CLK,
AC3_3430_MMC3_CMD,
AE11_3430_MMC3_DAT0,
AH9_3430_MMC3_DAT1,
AF13_3430_MMC3_DAT2,
AF13_3430_MMC3_DAT3,
/* SYS_NIRQ T2 INT1 */
AF26_34XX_SYS_NIRQ,
};
struct omap_mux_cfg {
arch/arm/plat-omap/include/mach/omap-pm.h
+301
View File
@@ -0,0 +1,301 @@
/*
* omap-pm.h - OMAP power management interface
*
* Copyright (C) 2008-2009 Texas Instruments, Inc.
* Copyright (C) 2008-2009 Nokia Corporation
* Paul Walmsley
*
* Interface developed by (in alphabetical order): Karthik Dasu, Jouni
* Högander, Tony Lindgren, Rajendra Nayak, Sakari Poussa,
* Veeramanikandan Raju, Anand Sawant, Igor Stoppa, Paul Walmsley,
* Richard Woodruff
*/
#ifndef ASM_ARM_ARCH_OMAP_OMAP_PM_H
#define ASM_ARM_ARCH_OMAP_OMAP_PM_H
#include <linux/device.h>
#include <linux/cpufreq.h>
#include "powerdomain.h"
/**
* struct omap_opp - clock frequency-to-OPP ID table for DSP, MPU
* @rate: target clock rate
* @opp_id: OPP ID
* @min_vdd: minimum VDD1 voltage (in millivolts) for this OPP
*
* Operating performance point data. Can vary by OMAP chip and board.
*/
struct omap_opp {
unsigned long rate;
u8 opp_id;
u16 min_vdd;
};
extern struct omap_opp *mpu_opps;
extern struct omap_opp *dsp_opps;
extern struct omap_opp *l3_opps;
/*
* agent_id values for use with omap_pm_set_min_bus_tput():
*
* OCP_INITIATOR_AGENT is only valid for devices that can act as
* initiators -- it represents the device's L3 interconnect
* connection. OCP_TARGET_AGENT represents the device's L4
* interconnect connection.
*/
#define OCP_TARGET_AGENT 1
#define OCP_INITIATOR_AGENT 2
/**
* omap_pm_if_early_init - OMAP PM init code called before clock fw init
* @mpu_opp_table: array ptr to struct omap_opp for MPU
* @dsp_opp_table: array ptr to struct omap_opp for DSP
* @l3_opp_table : array ptr to struct omap_opp for CORE
*
* Initialize anything that must be configured before the clock
* framework starts. The "_if_" is to avoid name collisions with the
* PM idle-loop code.
*/
int __init omap_pm_if_early_init(struct omap_opp *mpu_opp_table,
struct omap_opp *dsp_opp_table,
struct omap_opp *l3_opp_table);
/**
* omap_pm_if_init - OMAP PM init code called after clock fw init
*
* The main initialization code. OPP tables are passed in here. The
* "_if_" is to avoid name collisions with the PM idle-loop code.
*/
int __init omap_pm_if_init(void);
/**
* omap_pm_if_exit - OMAP PM exit code
*
* Exit code; currently unused. The "_if_" is to avoid name
* collisions with the PM idle-loop code.
*/
void omap_pm_if_exit(void);
/*
* Device-driver-originated constraints (via board-*.c files, platform_data)
*/
/**
* omap_pm_set_max_mpu_wakeup_lat - set the maximum MPU wakeup latency
* @dev: struct device * requesting the constraint
* @t: maximum MPU wakeup latency in microseconds
*
* Request that the maximum interrupt latency for the MPU to be no
* greater than 't' microseconds. "Interrupt latency" in this case is
* defined as the elapsed time from the occurrence of a hardware or
* timer interrupt to the time when the device driver's interrupt
* service routine has been entered by the MPU.
*
* It is intended that underlying PM code will use this information to
* determine what power state to put the MPU powerdomain into, and
* possibly the CORE powerdomain as well, since interrupt handling
* code currently runs from SDRAM. Advanced PM or board*.c code may
* also configure interrupt controller priorities, OCP bus priorities,
* CPU speed(s), etc.
*
* This function will not affect device wakeup latency, e.g., time
* elapsed from when a device driver enables a hardware device with
* clk_enable(), to when the device is ready for register access or
* other use. To control this device wakeup latency, use
* set_max_dev_wakeup_lat()
*
* Multiple calls to set_max_mpu_wakeup_lat() will replace the
* previous t value. To remove the latency target for the MPU, call
* with t = -1.
*
* No return value.
*/
void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t);
/**
* omap_pm_set_min_bus_tput - set minimum bus throughput needed by device
* @dev: struct device * requesting the constraint
* @tbus_id: interconnect to operate on (OCP_{INITIATOR,TARGET}_AGENT)
* @r: minimum throughput (in KiB/s)
*
* Request that the minimum data throughput on the OCP interconnect
* attached to device 'dev' interconnect agent 'tbus_id' be no less
* than 'r' KiB/s.
*
* It is expected that the OMAP PM or bus code will use this
* information to set the interconnect clock to run at the lowest
* possible speed that satisfies all current system users. The PM or
* bus code will adjust the estimate based on its model of the bus, so
* device driver authors should attempt to specify an accurate
* quantity for their device use case, and let the PM or bus code
* overestimate the numbers as necessary to handle request/response
* latency, other competing users on the system, etc. On OMAP2/3, if
* a driver requests a minimum L4 interconnect speed constraint, the
* code will also need to add an minimum L3 interconnect speed
* constraint,
*
* Multiple calls to set_min_bus_tput() will replace the previous rate
* value for this device. To remove the interconnect throughput
* restriction for this device, call with r = 0.
*
* No return value.
*/
void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r);
/**
* omap_pm_set_max_dev_wakeup_lat - set the maximum device enable latency
* @dev: struct device *
* @t: maximum device wakeup latency in microseconds
*
* Request that the maximum amount of time necessary for a device to
* become accessible after its clocks are enabled should be no greater
* than 't' microseconds. Specifically, this represents the time from
* when a device driver enables device clocks with clk_enable(), to
* when the register reads and writes on the device will succeed.
* This function should be called before clk_disable() is called,
* since the power state transition decision may be made during
* clk_disable().
*
* It is intended that underlying PM code will use this information to
* determine what power state to put the powerdomain enclosing this
* device into.
*
* Multiple calls to set_max_dev_wakeup_lat() will replace the
* previous wakeup latency values for this device. To remove the wakeup
* latency restriction for this device, call with t = -1.
*
* No return value.
*/
void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t);
/**
* omap_pm_set_max_sdma_lat - set the maximum system DMA transfer start latency
* @dev: struct device *
* @t: maximum DMA transfer start latency in microseconds
*
* Request that the maximum system DMA transfer start latency for this
* device 'dev' should be no greater than 't' microseconds. "DMA
* transfer start latency" here is defined as the elapsed time from
* when a device (e.g., McBSP) requests that a system DMA transfer
* start or continue, to the time at which data starts to flow into
* that device from the system DMA controller.
*
* It is intended that underlying PM code will use this information to
* determine what power state to put the CORE powerdomain into.
*
* Since system DMA transfers may not involve the MPU, this function
* will not affect MPU wakeup latency. Use set_max_cpu_lat() to do
* so. Similarly, this function will not affect device wakeup latency
* -- use set_max_dev_wakeup_lat() to affect that.
*
* Multiple calls to set_max_sdma_lat() will replace the previous t
* value for this device. To remove the maximum DMA latency for this
* device, call with t = -1.
*
* No return value.
*/
void omap_pm_set_max_sdma_lat(struct device *dev, long t);
/*
* DSP Bridge-specific constraints
*/
/**
* omap_pm_dsp_get_opp_table - get OPP->DSP clock frequency table
*
* Intended for use by DSPBridge. Returns an array of OPP->DSP clock
* frequency entries. The final item in the array should have .rate =
* .opp_id = 0.
*/
const struct omap_opp *omap_pm_dsp_get_opp_table(void);
/**
* omap_pm_dsp_set_min_opp - receive desired OPP target ID from DSP Bridge
* @opp_id: target DSP OPP ID
*
* Set a minimum OPP ID for the DSP. This is intended to be called
* only from the DSP Bridge MPU-side driver. Unfortunately, the only
* information that code receives from the DSP/BIOS load estimator is the
* target OPP ID; hence, this interface. No return value.
*/
void omap_pm_dsp_set_min_opp(u8 opp_id);
/**
* omap_pm_dsp_get_opp - report the current DSP OPP ID
*
* Report the current OPP for the DSP. Since on OMAP3, the DSP and
* MPU share a single voltage domain, the OPP ID returned back may
* represent a higher DSP speed than the OPP requested via
* omap_pm_dsp_set_min_opp().
*
* Returns the current VDD1 OPP ID, or 0 upon error.
*/
u8 omap_pm_dsp_get_opp(void);
/*
* CPUFreq-originated constraint
*
* In the future, this should be handled by custom OPP clocktype
* functions.
*/
/**
* omap_pm_cpu_get_freq_table - return a cpufreq_frequency_table array ptr
*
* Provide a frequency table usable by CPUFreq for the current chip/board.
* Returns a pointer to a struct cpufreq_frequency_table array or NULL
* upon error.
*/
struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void);
/**
* omap_pm_cpu_set_freq - set the current minimum MPU frequency
* @f: MPU frequency in Hz
*
* Set the current minimum CPU frequency. The actual CPU frequency
* used could end up higher if the DSP requested a higher OPP.
* Intended to be called by plat-omap/cpu_omap.c:omap_target(). No
* return value.
*/
void omap_pm_cpu_set_freq(unsigned long f);
/**
* omap_pm_cpu_get_freq - report the current CPU frequency
*
* Returns the current MPU frequency, or 0 upon error.
*/
unsigned long omap_pm_cpu_get_freq(void);
/*
* Device context loss tracking
*/
/**
* omap_pm_get_dev_context_loss_count - return count of times dev has lost ctx
* @dev: struct device *
*
* This function returns the number of times that the device @dev has
* lost its internal context. This generally occurs on a powerdomain
* transition to OFF. Drivers use this as an optimization to avoid restoring
* context if the device hasn't lost it. To use, drivers should initially
* call this in their context save functions and store the result. Early in
* the driver's context restore function, the driver should call this function
* again, and compare the result to the stored counter. If they differ, the
* driver must restore device context. If the number of context losses
* exceeds the maximum positive integer, the function will wrap to 0 and
* continue counting. Returns the number of context losses for this device,
* or -EINVAL upon error.
*/
int omap_pm_get_dev_context_loss_count(struct device *dev);
#endif
arch/arm/plat-omap/include/mach/omap44xx.h
+4 -4
View File
@@ -33,14 +33,14 @@
#define IRQ_SIR_IRQ 0x0040
#define OMAP44XX_GIC_DIST_BASE 0x48241000
#define OMAP44XX_GIC_CPU_BASE 0x48240100
#define OMAP44XX_VA_GIC_CPU_BASE IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
#define OMAP44XX_VA_GIC_CPU_BASE OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
#define OMAP44XX_SCU_BASE 0x48240000
#define OMAP44XX_VA_SCU_BASE IO_ADDRESS(OMAP44XX_SCU_BASE)
#define OMAP44XX_VA_SCU_BASE OMAP2_IO_ADDRESS(OMAP44XX_SCU_BASE)
#define OMAP44XX_LOCAL_TWD_BASE 0x48240600
#define OMAP44XX_VA_LOCAL_TWD_BASE IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
#define OMAP44XX_VA_LOCAL_TWD_BASE OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
#define OMAP44XX_LOCAL_TWD_SIZE 0x00000100
#define OMAP44XX_WKUPGEN_BASE 0x48281000
#define OMAP44XX_VA_WKUPGEN_BASE IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
#define OMAP44XX_VA_WKUPGEN_BASE OMAP2_IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
#endif /* __ASM_ARCH_OMAP44XX_H */
arch/arm/plat-omap/include/mach/omap_device.h
+141
View File
@@ -0,0 +1,141 @@
/*
* omap_device headers
*
* Copyright (C) 2009 Nokia Corporation
* Paul Walmsley
*
* Developed in collaboration with (alphabetical order): Benoit
* Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram
* Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
* Woodruff
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Eventually this type of functionality should either be
* a) implemented via arch-specific pointers in platform_device
* or
* b) implemented as a proper omap_bus/omap_device in Linux, no more
* platform_device
*
* omap_device differs from omap_hwmod in that it includes external
* (e.g., board- and system-level) integration details. omap_hwmod
* stores hardware data that is invariant for a given OMAP chip.
*
* To do:
* - GPIO integration
* - regulator integration
*
*/
#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <mach/omap_hwmod.h>
/* omap_device._state values */
#define OMAP_DEVICE_STATE_UNKNOWN 0
#define OMAP_DEVICE_STATE_ENABLED 1
#define OMAP_DEVICE_STATE_IDLE 2
#define OMAP_DEVICE_STATE_SHUTDOWN 3
/**
* struct omap_device - omap_device wrapper for platform_devices
* @pdev: platform_device
* @hwmods: (one .. many per omap_device)
* @hwmods_cnt: ARRAY_SIZE() of @hwmods
* @pm_lats: ptr to an omap_device_pm_latency table
* @pm_lats_cnt: ARRAY_SIZE() of what is passed to @pm_lats
* @pm_lat_level: array index of the last odpl entry executed - -1 if never
* @dev_wakeup_lat: dev wakeup latency in microseconds
* @_dev_wakeup_lat_limit: dev wakeup latency limit in usec - set by OMAP PM
* @_state: one of OMAP_DEVICE_STATE_* (see above)
* @flags: device flags
*
* Integrates omap_hwmod data into Linux platform_device.
*
* Field names beginning with underscores are for the internal use of
* the omap_device code.
*
*/
struct omap_device {
struct platform_device pdev;
struct omap_hwmod **hwmods;
struct omap_device_pm_latency *pm_lats;
u32 dev_wakeup_lat;
u32 _dev_wakeup_lat_limit;
u8 pm_lats_cnt;
s8 pm_lat_level;
u8 hwmods_cnt;
u8 _state;
};
/* Device driver interface (call via platform_data fn ptrs) */
int omap_device_enable(struct platform_device *pdev);
int omap_device_idle(struct platform_device *pdev);
int omap_device_shutdown(struct platform_device *pdev);
/* Core code interface */
int omap_device_count_resources(struct omap_device *od);
int omap_device_fill_resources(struct omap_device *od, struct resource *res);
struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
struct omap_hwmod *oh, void *pdata,
int pdata_len,
struct omap_device_pm_latency *pm_lats,
int pm_lats_cnt);
struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
struct omap_hwmod **oh, int oh_cnt,
void *pdata, int pdata_len,
struct omap_device_pm_latency *pm_lats,
int pm_lats_cnt);
int omap_device_register(struct omap_device *od);
/* OMAP PM interface */
int omap_device_align_pm_lat(struct platform_device *pdev,
u32 new_wakeup_lat_limit);
struct powerdomain *omap_device_get_pwrdm(struct omap_device *od);
/* Other */
int omap_device_idle_hwmods(struct omap_device *od);
int omap_device_enable_hwmods(struct omap_device *od);
int omap_device_disable_clocks(struct omap_device *od);
int omap_device_enable_clocks(struct omap_device *od);
/*
* Entries should be kept in latency order ascending
*
* deact_lat is the maximum number of microseconds required to complete
* deactivate_func() at the device's slowest OPP.
*
* act_lat is the maximum number of microseconds required to complete
* activate_func() at the device's slowest OPP.
*
* This will result in some suboptimal power management decisions at fast
* OPPs, but avoids having to recompute all device power management decisions
* if the system shifts from a fast OPP to a slow OPP (in order to meet
* latency requirements).
*
* XXX should deactivate_func/activate_func() take platform_device pointers
* rather than omap_device pointers?
*/
struct omap_device_pm_latency {
u32 deactivate_lat;
int (*deactivate_func)(struct omap_device *od);
u32 activate_lat;
int (*activate_func)(struct omap_device *od);
};
#endif
arch/arm/plat-omap/include/mach/omap_hwmod.h
+447
View File
@@ -0,0 +1,447 @@
/*
* omap_hwmod macros, structures
*
* Copyright (C) 2009 Nokia Corporation
* Paul Walmsley
*
* Created in collaboration with (alphabetical order): Benoit Cousson,
* Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari
* Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* These headers and macros are used to define OMAP on-chip module
* data and their integration with other OMAP modules and Linux.
*
* References:
* - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064)
* - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090)
* - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108)
* - OMAP4430 Multimedia Device Silicon Revision 1.0 (SWPU140)
* - Open Core Protocol Specification 2.2
*
* To do:
* - add interconnect error log structures
* - add pinmuxing
* - init_conn_id_bit (CONNID_BIT_VECTOR)
* - implement default hwmod SMS/SDRC flags?
*
*/
#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <mach/cpu.h>
struct omap_device;
/* OCP SYSCONFIG bit shifts/masks */
#define SYSC_MIDLEMODE_SHIFT 12
#define SYSC_MIDLEMODE_MASK (0x3 << SYSC_MIDLEMODE_SHIFT)
#define SYSC_CLOCKACTIVITY_SHIFT 8
#define SYSC_CLOCKACTIVITY_MASK (0x3 << SYSC_CLOCKACTIVITY_SHIFT)
#define SYSC_SIDLEMODE_SHIFT 3
#define SYSC_SIDLEMODE_MASK (0x3 << SYSC_SIDLEMODE_SHIFT)
#define SYSC_ENAWAKEUP_SHIFT 2
#define SYSC_ENAWAKEUP_MASK (1 << SYSC_ENAWAKEUP_SHIFT)
#define SYSC_SOFTRESET_SHIFT 1
#define SYSC_SOFTRESET_MASK (1 << SYSC_SOFTRESET_SHIFT)
/* OCP SYSSTATUS bit shifts/masks */
#define SYSS_RESETDONE_SHIFT 0
#define SYSS_RESETDONE_MASK (1 << SYSS_RESETDONE_SHIFT)
/* Master standby/slave idle mode flags */
#define HWMOD_IDLEMODE_FORCE (1 << 0)
#define HWMOD_IDLEMODE_NO (1 << 1)
#define HWMOD_IDLEMODE_SMART (1 << 2)
/**
* struct omap_hwmod_dma_info - MPU address space handled by the hwmod
* @name: name of the DMA channel (module local name)
* @dma_ch: DMA channel ID
*
* @name should be something short, e.g., "tx" or "rx". It is for use
* by platform_get_resource_byname(). It is defined locally to the
* hwmod.
*/
struct omap_hwmod_dma_info {
const char *name;
u16 dma_ch;
};
/**
* struct omap_hwmod_opt_clk - optional clocks used by this hwmod
* @role: "sys", "32k", "tv", etc -- for use in clk_get()
* @clkdev_dev_id: opt clock: clkdev dev_id string
* @clkdev_con_id: opt clock: clkdev con_id string
* @_clk: pointer to the struct clk (filled in at runtime)
*
* The module's interface clock and main functional clock should not
* be added as optional clocks.
*/
struct omap_hwmod_opt_clk {
const char *role;
const char *clkdev_dev_id;
const char *clkdev_con_id;
struct clk *_clk;
};
/* omap_hwmod_omap2_firewall.flags bits */
#define OMAP_FIREWALL_L3 (1 << 0)
#define OMAP_FIREWALL_L4 (1 << 1)
/**
* struct omap_hwmod_omap2_firewall - OMAP2/3 device firewall data
* @l3_perm_bit: bit shift for L3_PM_*_PERMISSION_*
* @l4_fw_region: L4 firewall region ID
* @l4_prot_group: L4 protection group ID
* @flags: (see omap_hwmod_omap2_firewall.flags macros above)
*/
struct omap_hwmod_omap2_firewall {
u8 l3_perm_bit;
u8 l4_fw_region;
u8 l4_prot_group;
u8 flags;
};
/*
* omap_hwmod_addr_space.flags bits
*
* ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init.
* ADDR_TYPE_RT: Address space contains module register target data.
*/
#define ADDR_MAP_ON_INIT (1 << 0)
#define ADDR_TYPE_RT (1 << 1)
/**
* struct omap_hwmod_addr_space - MPU address space handled by the hwmod
* @pa_start: starting physical address
* @pa_end: ending physical address
* @flags: (see omap_hwmod_addr_space.flags macros above)
*
* Address space doesn't necessarily follow physical interconnect
* structure. GPMC is one example.
*/
struct omap_hwmod_addr_space {
u32 pa_start;
u32 pa_end;
u8 flags;
};
/*
* omap_hwmod_ocp_if.user bits: these indicate the initiators that use this
* interface to interact with the hwmod. Used to add sleep dependencies
* when the module is enabled or disabled.
*/
#define OCP_USER_MPU (1 << 0)
#define OCP_USER_SDMA (1 << 1)
/* omap_hwmod_ocp_if.flags bits */
#define OCPIF_HAS_IDLEST (1 << 0)
#define OCPIF_SWSUP_IDLE (1 << 1)
#define OCPIF_CAN_BURST (1 << 2)
/**
* struct omap_hwmod_ocp_if - OCP interface data
* @master: struct omap_hwmod that initiates OCP transactions on this link
* @slave: struct omap_hwmod that responds to OCP transactions on this link
* @addr: address space associated with this link
* @clkdev_dev_id: interface clock: clkdev dev_id string
* @clkdev_con_id: interface clock: clkdev con_id string
* @_clk: pointer to the interface struct clk (filled in at runtime)
* @fw: interface firewall data
* @addr_cnt: ARRAY_SIZE(@addr)
* @width: OCP data width
* @thread_cnt: number of threads
* @max_burst_len: maximum burst length in @width sized words (0 if unlimited)
* @user: initiators using this interface (see OCP_USER_* macros above)
* @flags: OCP interface flags (see OCPIF_* macros above)
*
* It may also be useful to add a tag_cnt field for OCP2.x devices.
*
* Parameter names beginning with an underscore are managed internally by
* the omap_hwmod code and should not be set during initialization.
*/
struct omap_hwmod_ocp_if {
struct omap_hwmod *master;
struct omap_hwmod *slave;
struct omap_hwmod_addr_space *addr;
const char *clkdev_dev_id;
const char *clkdev_con_id;
struct clk *_clk;
union {
struct omap_hwmod_omap2_firewall omap2;
} fw;
u8 addr_cnt;
u8 width;
u8 thread_cnt;
u8 max_burst_len;
u8 user;
u8 flags;
};
/* Macros for use in struct omap_hwmod_sysconfig */
/* Flags for use in omap_hwmod_sysconfig.idlemodes */
#define MASTER_STANDBY_SHIFT 2
#define SLAVE_IDLE_SHIFT 0
#define SIDLE_FORCE (HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT)
#define SIDLE_NO (HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT)
#define SIDLE_SMART (HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT)
#define MSTANDBY_FORCE (HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT)
#define MSTANDBY_NO (HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT)
#define MSTANDBY_SMART (HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT)
/* omap_hwmod_sysconfig.sysc_flags capability flags */
#define SYSC_HAS_AUTOIDLE (1 << 0)
#define SYSC_HAS_SOFTRESET (1 << 1)
#define SYSC_HAS_ENAWAKEUP (1 << 2)
#define SYSC_HAS_EMUFREE (1 << 3)
#define SYSC_HAS_CLOCKACTIVITY (1 << 4)
#define SYSC_HAS_SIDLEMODE (1 << 5)
#define SYSC_HAS_MIDLEMODE (1 << 6)
#define SYSS_MISSING (1 << 7)
/* omap_hwmod_sysconfig.clockact flags */
#define CLOCKACT_TEST_BOTH 0x0
#define CLOCKACT_TEST_MAIN 0x1
#define CLOCKACT_TEST_ICLK 0x2
#define CLOCKACT_TEST_NONE 0x3
/**
* struct omap_hwmod_sysconfig - hwmod OCP_SYSCONFIG/OCP_SYSSTATUS data
* @rev_offs: IP block revision register offset (from module base addr)
* @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
* @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
* @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
* @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
* @clockact: the default value of the module CLOCKACTIVITY bits
*
* @clockact describes to the module which clocks are likely to be
* disabled when the PRCM issues its idle request to the module. Some
* modules have separate clockdomains for the interface clock and main
* functional clock, and can check whether they should acknowledge the
* idle request based on the internal module functionality that has
* been associated with the clocks marked in @clockact. This field is
* only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below)
*
*/
struct omap_hwmod_sysconfig {
u16 rev_offs;
u16 sysc_offs;
u16 syss_offs;
u8 idlemodes;
u8 sysc_flags;
u8 clockact;
};
/**
* struct omap_hwmod_omap2_prcm - OMAP2/3-specific PRCM data
* @module_offs: PRCM submodule offset from the start of the PRM/CM
* @prcm_reg_id: PRCM register ID (e.g., 3 for CM_AUTOIDLE3)
* @module_bit: register bit shift for AUTOIDLE, WKST, WKEN, GRPSEL regs
* @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3)
* @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit
* @idlest_stdby_bit: register bit shift for CM_IDLEST master standby bit
*
* @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST,
* WKEN, GRPSEL registers. In an ideal world, no extra information
* would be needed for IDLEST information, but alas, there are some
* exceptions, so @idlest_reg_id, @idlest_idle_bit, @idlest_stdby_bit
* are needed for the IDLEST registers (c.f. 2430 I2CHS, 3430 USBHOST)
*/
struct omap_hwmod_omap2_prcm {
s16 module_offs;
u8 prcm_reg_id;
u8 module_bit;
u8 idlest_reg_id;
u8 idlest_idle_bit;
u8 idlest_stdby_bit;
};
/**
* struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
* @module_offs: PRCM submodule offset from the start of the PRM/CM1/CM2
* @device_offs: device register offset from @module_offs
* @submodule_wkdep_bit: bit shift of the WKDEP range
*/
struct omap_hwmod_omap4_prcm {
u32 module_offs;
u16 device_offs;
u8 submodule_wkdep_bit;
};
/*
* omap_hwmod.flags definitions
*
* HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
* of idle, rather than relying on module smart-idle
* HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
* of standby, rather than relying on module smart-standby
* HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
* SDRAM controller, etc.
* HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM
* controller, etc.
* HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
*/
#define HWMOD_SWSUP_SIDLE (1 << 0)
#define HWMOD_SWSUP_MSTANDBY (1 << 1)
#define HWMOD_INIT_NO_RESET (1 << 2)
#define HWMOD_INIT_NO_IDLE (1 << 3)
#define HWMOD_SET_DEFAULT_CLOCKACT (1 << 4)
/*
* omap_hwmod._int_flags definitions
* These are for internal use only and are managed by the omap_hwmod code.
*
* _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module
* _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP
* _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached
*/
#define _HWMOD_NO_MPU_PORT (1 << 0)
#define _HWMOD_WAKEUP_ENABLED (1 << 1)
#define _HWMOD_SYSCONFIG_LOADED (1 << 2)
/*
* omap_hwmod._state definitions
*
* INITIALIZED: reset (optionally), initialized, enabled, disabled
* (optionally)
*
*
*/
#define _HWMOD_STATE_UNKNOWN 0
#define _HWMOD_STATE_REGISTERED 1
#define _HWMOD_STATE_CLKS_INITED 2
#define _HWMOD_STATE_INITIALIZED 3
#define _HWMOD_STATE_ENABLED 4
#define _HWMOD_STATE_IDLE 5
#define _HWMOD_STATE_DISABLED 6
/**
* struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks)
* @name: name of the hwmod
* @od: struct omap_device currently associated with this hwmod (internal use)
* @mpu_irqs: ptr to an array of MPU IRQs (see also mpu_irqs_cnt)
* @sdma_chs: ptr to an array of SDMA channel IDs (see also sdma_chs_cnt)
* @prcm: PRCM data pertaining to this hwmod
* @clkdev_dev_id: main clock: clkdev dev_id string
* @clkdev_con_id: main clock: clkdev con_id string
* @_clk: pointer to the main struct clk (filled in at runtime)
* @opt_clks: other device clocks that drivers can request (0..*)
* @masters: ptr to array of OCP ifs that this hwmod can initiate on
* @slaves: ptr to array of OCP ifs that this hwmod can respond on
* @sysconfig: device SYSCONFIG/SYSSTATUS register data
* @dev_attr: arbitrary device attributes that can be passed to the driver
* @_sysc_cache: internal-use hwmod flags
* @_rt_va: cached register target start address (internal use)
* @_mpu_port_index: cached MPU register target slave ID (internal use)
* @msuspendmux_reg_id: CONTROL_MSUSPENDMUX register ID (1-6)
* @msuspendmux_shift: CONTROL_MSUSPENDMUX register bit shift
* @mpu_irqs_cnt: number of @mpu_irqs
* @sdma_chs_cnt: number of @sdma_chs
* @opt_clks_cnt: number of @opt_clks
* @master_cnt: number of @master entries
* @slaves_cnt: number of @slave entries
* @response_lat: device OCP response latency (in interface clock cycles)
* @_int_flags: internal-use hwmod flags
* @_state: internal-use hwmod state
* @flags: hwmod flags (documented below)
* @omap_chip: OMAP chips this hwmod is present on
* @node: list node for hwmod list (internal use)
*
* @clkdev_dev_id, @clkdev_con_id, and @clk all refer to this module's "main
* clock," which for our purposes is defined as "the functional clock needed
* for register accesses to complete." Modules may not have a main clock if
* the interface clock also serves as a main clock.
*
* Parameter names beginning with an underscore are managed internally by
* the omap_hwmod code and should not be set during initialization.
*/
struct omap_hwmod {
const char *name;
struct omap_device *od;
u8 *mpu_irqs;
struct omap_hwmod_dma_info *sdma_chs;
union {
struct omap_hwmod_omap2_prcm omap2;
struct omap_hwmod_omap4_prcm omap4;
} prcm;
const char *clkdev_dev_id;
const char *clkdev_con_id;
struct clk *_clk;
struct omap_hwmod_opt_clk *opt_clks;
struct omap_hwmod_ocp_if **masters; /* connect to *_IA */
struct omap_hwmod_ocp_if **slaves; /* connect to *_TA */
struct omap_hwmod_sysconfig *sysconfig;
void *dev_attr;
u32 _sysc_cache;
void __iomem *_rt_va;
struct list_head node;
u16 flags;
u8 _mpu_port_index;
u8 msuspendmux_reg_id;
u8 msuspendmux_shift;
u8 response_lat;
u8 mpu_irqs_cnt;
u8 sdma_chs_cnt;
u8 opt_clks_cnt;
u8 masters_cnt;
u8 slaves_cnt;
u8 hwmods_cnt;
u8 _int_flags;
u8 _state;
const struct omap_chip_id omap_chip;
};
int omap_hwmod_init(struct omap_hwmod **ohs);
int omap_hwmod_register(struct omap_hwmod *oh);
int omap_hwmod_unregister(struct omap_hwmod *oh);
struct omap_hwmod *omap_hwmod_lookup(const char *name);
int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh));
int omap_hwmod_late_init(void);
int omap_hwmod_enable(struct omap_hwmod *oh);
int omap_hwmod_idle(struct omap_hwmod *oh);
int omap_hwmod_shutdown(struct omap_hwmod *oh);
int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
int omap_hwmod_reset(struct omap_hwmod *oh);
void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
void omap_hwmod_writel(u32 v, struct omap_hwmod *oh, u16 reg_offs);
u32 omap_hwmod_readl(struct omap_hwmod *oh, u16 reg_offs);
int omap_hwmod_count_resources(struct omap_hwmod *oh);
int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh);
int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
struct omap_hwmod *init_oh);
int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
struct omap_hwmod *init_oh);
int omap_hwmod_set_clockact_both(struct omap_hwmod *oh);
int omap_hwmod_set_clockact_main(struct omap_hwmod *oh);
int omap_hwmod_set_clockact_iclk(struct omap_hwmod *oh);
int omap_hwmod_set_clockact_none(struct omap_hwmod *oh);
int omap_hwmod_enable_wakeup(struct omap_hwmod *oh);
int omap_hwmod_disable_wakeup(struct omap_hwmod *oh);
#endif
arch/arm/plat-omap/include/mach/powerdomain.h
+14 -1
View File
@@ -117,6 +117,13 @@ struct powerdomain {
struct list_head node;
int state;
unsigned state_counter[4];
#ifdef CONFIG_PM_DEBUG
s64 timer;
s64 state_timer[4];
#endif
};
@@ -126,7 +133,8 @@ int pwrdm_register(struct powerdomain *pwrdm);
int pwrdm_unregister(struct powerdomain *pwrdm);
struct powerdomain *pwrdm_lookup(const char *name);
int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm));
int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
void *user);
int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
@@ -164,4 +172,9 @@ bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm);
int pwrdm_wait_transition(struct powerdomain *pwrdm);
int pwrdm_state_switch(struct powerdomain *pwrdm);
int pwrdm_clkdm_state_switch(struct clockdomain *clkdm);
int pwrdm_pre_transition(void);
int pwrdm_post_transition(void);
#endif
arch/arm/plat-omap/include/mach/sdrc.h
+12 -3
View File
@@ -21,19 +21,28 @@
/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
#define SDRC_SYSCONFIG 0x010
#define SDRC_CS_CFG 0x040
#define SDRC_SHARING 0x044
#define SDRC_ERR_TYPE 0x04C
#define SDRC_DLLA_CTRL 0x060
#define SDRC_DLLA_STATUS 0x064
#define SDRC_DLLB_CTRL 0x068
#define SDRC_DLLB_STATUS 0x06C
#define SDRC_POWER 0x070
#define SDRC_MCFG_0 0x080
#define SDRC_MR_0 0x084
#define SDRC_EMR2_0 0x08c
#define SDRC_ACTIM_CTRL_A_0 0x09c
#define SDRC_ACTIM_CTRL_B_0 0x0a0
#define SDRC_RFR_CTRL_0 0x0a4
#define SDRC_MANUAL_0 0x0a8
#define SDRC_MCFG_1 0x0B0
#define SDRC_MR_1 0x0B4
#define SDRC_EMR2_1 0x0BC
#define SDRC_ACTIM_CTRL_A_1 0x0C4
#define SDRC_ACTIM_CTRL_B_1 0x0C8
#define SDRC_RFR_CTRL_1 0x0D4
#define SDRC_MANUAL_1 0x0D8
/*
* These values represent the number of memory clock cycles between
@@ -71,11 +80,11 @@
*/
#define OMAP242X_SMS_REGADDR(reg) \
(void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
(void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
#define OMAP243X_SMS_REGADDR(reg) \
(void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
(void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
#define OMAP343X_SMS_REGADDR(reg) \
(void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
(void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
/* SMS register offsets - read/write with sms_{read,write}_reg() */
arch/arm/plat-omap/include/mach/serial.h
+3
View File
@@ -13,6 +13,8 @@
#ifndef __ASM_ARCH_SERIAL_H
#define __ASM_ARCH_SERIAL_H
#include <linux/init.h>
#if defined(CONFIG_ARCH_OMAP1)
/* OMAP1 serial ports */
#define OMAP_UART1_BASE 0xfffb0000
@@ -53,6 +55,7 @@
})
#ifndef __ASSEMBLER__
extern void __init omap_serial_early_init(void);
extern void omap_serial_init(void);
extern int omap_uart_can_sleep(void);
extern void omap_uart_check_wakeup(void);
arch/arm/plat-omap/io.c
+60 -2
View File
@@ -30,8 +30,8 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
{
#ifdef CONFIG_ARCH_OMAP1
if (cpu_class_is_omap1()) {
if (BETWEEN(p, IO_PHYS, IO_SIZE))
return XLATE(p, IO_PHYS, IO_VIRT);
if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE))
return XLATE(p, OMAP1_IO_PHYS, OMAP1_IO_VIRT);
}
if (cpu_is_omap730()) {
if (BETWEEN(p, OMAP730_DSP_BASE, OMAP730_DSP_SIZE))
@@ -132,3 +132,61 @@ void omap_iounmap(volatile void __iomem *addr)
__iounmap(addr);
}
EXPORT_SYMBOL(omap_iounmap);
/*
* NOTE: Please use ioremap + __raw_read/write where possible instead of these
*/
u8 omap_readb(u32 pa)
{
if (cpu_class_is_omap1())
return __raw_readb(OMAP1_IO_ADDRESS(pa));
else
return __raw_readb(OMAP2_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_readb);
u16 omap_readw(u32 pa)
{
if (cpu_class_is_omap1())
return __raw_readw(OMAP1_IO_ADDRESS(pa));
else
return __raw_readw(OMAP2_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_readw);
u32 omap_readl(u32 pa)
{
if (cpu_class_is_omap1())
return __raw_readl(OMAP1_IO_ADDRESS(pa));
else
return __raw_readl(OMAP2_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_readl);
void omap_writeb(u8 v, u32 pa)
{
if (cpu_class_is_omap1())
__raw_writeb(v, OMAP1_IO_ADDRESS(pa));
else
__raw_writeb(v, OMAP2_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_writeb);
void omap_writew(u16 v, u32 pa)
{
if (cpu_class_is_omap1())
__raw_writew(v, OMAP1_IO_ADDRESS(pa));
else
__raw_writew(v, OMAP2_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_writew);
void omap_writel(u32 v, u32 pa)
{
if (cpu_class_is_omap1())
__raw_writel(v, OMAP1_IO_ADDRESS(pa));
else
__raw_writel(v, OMAP2_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_writel);
arch/arm/plat-omap/iommu-debug.c
+415
View File
@@ -0,0 +1,415 @@
/*
* omap iommu: debugfs interface
*
* Copyright (C) 2008-2009 Nokia Corporation
*
* Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/uaccess.h>
#include <linux/platform_device.h>
#include <linux/debugfs.h>
#include <mach/iommu.h>
#include <mach/iovmm.h>
#include "iopgtable.h"
#define MAXCOLUMN 100 /* for short messages */
static DEFINE_MUTEX(iommu_debug_lock);
static struct dentry *iommu_debug_root;
static ssize_t debug_read_ver(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
u32 ver = iommu_arch_version();
char buf[MAXCOLUMN], *p = buf;
p += sprintf(p, "H/W version: %d.%d\n", (ver >> 4) & 0xf , ver & 0xf);
return simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
}
static ssize_t debug_read_regs(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
struct iommu *obj = file->private_data;
char *p, *buf;
ssize_t bytes;
buf = kmalloc(count, GFP_KERNEL);
if (!buf)
return -ENOMEM;
p = buf;
mutex_lock(&iommu_debug_lock);
bytes = iommu_dump_ctx(obj, p, count);
bytes = simple_read_from_buffer(userbuf, count, ppos, buf, bytes);
mutex_unlock(&iommu_debug_lock);
kfree(buf);
return bytes;
}
static ssize_t debug_read_tlb(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
struct iommu *obj = file->private_data;
char *p, *buf;
ssize_t bytes, rest;
buf = kmalloc(count, GFP_KERNEL);
if (!buf)
return -ENOMEM;
p = buf;
mutex_lock(&iommu_debug_lock);
p += sprintf(p, "%8s %8s\n", "cam:", "ram:");
p += sprintf(p, "-----------------------------------------\n");
rest = count - (p - buf);
p += dump_tlb_entries(obj, p, rest);
bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
mutex_unlock(&iommu_debug_lock);
kfree(buf);
return bytes;
}
static ssize_t debug_write_pagetable(struct file *file,
const char __user *userbuf, size_t count, loff_t *ppos)
{
struct iotlb_entry e;
struct cr_regs cr;
int err;
struct iommu *obj = file->private_data;
char buf[MAXCOLUMN], *p = buf;
count = min(count, sizeof(buf));
mutex_lock(&iommu_debug_lock);
if (copy_from_user(p, userbuf, count)) {
mutex_unlock(&iommu_debug_lock);
return -EFAULT;
}
sscanf(p, "%x %x", &cr.cam, &cr.ram);
if (!cr.cam || !cr.ram) {
mutex_unlock(&iommu_debug_lock);
return -EINVAL;
}
iotlb_cr_to_e(&cr, &e);
err = iopgtable_store_entry(obj, &e);
if (err)
dev_err(obj->dev, "%s: fail to store cr\n", __func__);
mutex_unlock(&iommu_debug_lock);
return count;
}
#define dump_ioptable_entry_one(lv, da, val) \
({ \
int __err = 0; \
ssize_t bytes; \
const int maxcol = 22; \
const char *str = "%d: %08x %08x\n"; \
bytes = snprintf(p, maxcol, str, lv, da, val); \
p += bytes; \
len -= bytes; \
if (len < maxcol) \
__err = -ENOMEM; \
__err; \
})
static ssize_t dump_ioptable(struct iommu *obj, char *buf, ssize_t len)
{
int i;
u32 *iopgd;
char *p = buf;
spin_lock(&obj->page_table_lock);
iopgd = iopgd_offset(obj, 0);
for (i = 0; i < PTRS_PER_IOPGD; i++, iopgd++) {
int j, err;
u32 *iopte;
u32 da;
if (!*iopgd)
continue;
if (!(*iopgd & IOPGD_TABLE)) {
da = i << IOPGD_SHIFT;
err = dump_ioptable_entry_one(1, da, *iopgd);
if (err)
goto out;
continue;
}
iopte = iopte_offset(iopgd, 0);
for (j = 0; j < PTRS_PER_IOPTE; j++, iopte++) {
if (!*iopte)
continue;
da = (i << IOPGD_SHIFT) + (j << IOPTE_SHIFT);
err = dump_ioptable_entry_one(2, da, *iopgd);
if (err)
goto out;
}
}
out:
spin_unlock(&obj->page_table_lock);
return p - buf;
}
static ssize_t debug_read_pagetable(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
struct iommu *obj = file->private_data;
char *p, *buf;
size_t bytes;
buf = (char *)__get_free_page(GFP_KERNEL);
if (!buf)
return -ENOMEM;
p = buf;
p += sprintf(p, "L: %8s %8s\n", "da:", "pa:");
p += sprintf(p, "-----------------------------------------\n");
mutex_lock(&iommu_debug_lock);
bytes = PAGE_SIZE - (p - buf);
p += dump_ioptable(obj, p, bytes);
bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
mutex_unlock(&iommu_debug_lock);
free_page((unsigned long)buf);
return bytes;
}
static ssize_t debug_read_mmap(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
struct iommu *obj = file->private_data;
char *p, *buf;
struct iovm_struct *tmp;
int uninitialized_var(i);
ssize_t bytes;
buf = (char *)__get_free_page(GFP_KERNEL);
if (!buf)
return -ENOMEM;
p = buf;
p += sprintf(p, "%-3s %-8s %-8s %6s %8s\n",
"No", "start", "end", "size", "flags");
p += sprintf(p, "-------------------------------------------------\n");
mutex_lock(&iommu_debug_lock);
list_for_each_entry(tmp, &obj->mmap, list) {
size_t len;
const char *str = "%3d %08x-%08x %6x %8x\n";
const int maxcol = 39;
len = tmp->da_end - tmp->da_start;
p += snprintf(p, maxcol, str,
i, tmp->da_start, tmp->da_end, len, tmp->flags);
if (PAGE_SIZE - (p - buf) < maxcol)
break;
i++;
}
bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
mutex_unlock(&iommu_debug_lock);
free_page((unsigned long)buf);
return bytes;
}
static ssize_t debug_read_mem(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
struct iommu *obj = file->private_data;
char *p, *buf;
struct iovm_struct *area;
ssize_t bytes;
count = min_t(ssize_t, count, PAGE_SIZE);
buf = (char *)__get_free_page(GFP_KERNEL);
if (!buf)
return -ENOMEM;
p = buf;
mutex_lock(&iommu_debug_lock);
area = find_iovm_area(obj, (u32)ppos);
if (IS_ERR(area)) {
bytes = -EINVAL;
goto err_out;
}
memcpy(p, area->va, count);
p += count;
bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
err_out:
mutex_unlock(&iommu_debug_lock);
free_page((unsigned long)buf);
return bytes;
}
static ssize_t debug_write_mem(struct file *file, const char __user *userbuf,
size_t count, loff_t *ppos)
{
struct iommu *obj = file->private_data;
struct iovm_struct *area;
char *p, *buf;
count = min_t(size_t, count, PAGE_SIZE);
buf = (char *)__get_free_page(GFP_KERNEL);
if (!buf)
return -ENOMEM;
p = buf;
mutex_lock(&iommu_debug_lock);
if (copy_from_user(p, userbuf, count)) {
count = -EFAULT;
goto err_out;
}
area = find_iovm_area(obj, (u32)ppos);
if (IS_ERR(area)) {
count = -EINVAL;
goto err_out;
}
memcpy(area->va, p, count);
err_out:
mutex_unlock(&iommu_debug_lock);
free_page((unsigned long)buf);
return count;
}
static int debug_open_generic(struct inode *inode, struct file *file)
{
file->private_data = inode->i_private;
return 0;
}
#define DEBUG_FOPS(name) \
static const struct file_operations debug_##name##_fops = { \
.open = debug_open_generic, \
.read = debug_read_##name, \
.write = debug_write_##name, \
};
#define DEBUG_FOPS_RO(name) \
static const struct file_operations debug_##name##_fops = { \
.open = debug_open_generic, \
.read = debug_read_##name, \
};
DEBUG_FOPS_RO(ver);
DEBUG_FOPS_RO(regs);
DEBUG_FOPS_RO(tlb);
DEBUG_FOPS(pagetable);
DEBUG_FOPS_RO(mmap);
DEBUG_FOPS(mem);
#define __DEBUG_ADD_FILE(attr, mode) \
{ \
struct dentry *dent; \
dent = debugfs_create_file(#attr, mode, parent, \
obj, &debug_##attr##_fops); \
if (!dent) \
return -ENOMEM; \
}
#define DEBUG_ADD_FILE(name) __DEBUG_ADD_FILE(name, 600)
#define DEBUG_ADD_FILE_RO(name) __DEBUG_ADD_FILE(name, 400)
static int iommu_debug_register(struct device *dev, void *data)
{
struct platform_device *pdev = to_platform_device(dev);
struct iommu *obj = platform_get_drvdata(pdev);
struct dentry *d, *parent;
if (!obj || !obj->dev)
return -EINVAL;
d = debugfs_create_dir(obj->name, iommu_debug_root);
if (!d)
return -ENOMEM;
parent = d;
d = debugfs_create_u8("nr_tlb_entries", 400, parent,
(u8 *)&obj->nr_tlb_entries);
if (!d)
return -ENOMEM;
DEBUG_ADD_FILE_RO(ver);
DEBUG_ADD_FILE_RO(regs);
DEBUG_ADD_FILE_RO(tlb);
DEBUG_ADD_FILE(pagetable);
DEBUG_ADD_FILE_RO(mmap);
DEBUG_ADD_FILE(mem);
return 0;
}
static int __init iommu_debug_init(void)
{
struct dentry *d;
int err;
d = debugfs_create_dir("iommu", NULL);
if (!d)
return -ENOMEM;
iommu_debug_root = d;
err = foreach_iommu_device(d, iommu_debug_register);
if (err)
goto err_out;
return 0;
err_out:
debugfs_remove_recursive(iommu_debug_root);
return err;
}
module_init(iommu_debug_init)
static void __exit iommu_debugfs_exit(void)
{
debugfs_remove_recursive(iommu_debug_root);
}
module_exit(iommu_debugfs_exit)
MODULE_DESCRIPTION("omap iommu: debugfs interface");
MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
MODULE_LICENSE("GPL v2");
arch/arm/plat-omap/iommu.c
+12 -11
View File
@@ -351,16 +351,14 @@ EXPORT_SYMBOL_GPL(flush_iotlb_all);
#if defined(CONFIG_OMAP_IOMMU_DEBUG_MODULE)
ssize_t iommu_dump_ctx(struct iommu *obj, char *buf)
ssize_t iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t bytes)
{
ssize_t bytes;
if (!obj || !buf)
return -EINVAL;
clk_enable(obj->clk);
bytes = arch_iommu->dump_ctx(obj, buf);
bytes = arch_iommu->dump_ctx(obj, buf, bytes);
clk_disable(obj->clk);
@@ -368,7 +366,7 @@ ssize_t iommu_dump_ctx(struct iommu *obj, char *buf)
}
EXPORT_SYMBOL_GPL(iommu_dump_ctx);
static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs)
static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs, int num)
{
int i;
struct iotlb_lock saved, l;
@@ -379,7 +377,7 @@ static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs)
iotlb_lock_get(obj, &saved);
memcpy(&l, &saved, sizeof(saved));
for (i = 0; i < obj->nr_tlb_entries; i++) {
for (i = 0; i < num; i++) {
struct cr_regs tmp;
iotlb_lock_get(obj, &l);
@@ -402,18 +400,21 @@ static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs)
* @obj: target iommu
* @buf: output buffer
**/
size_t dump_tlb_entries(struct iommu *obj, char *buf)
size_t dump_tlb_entries(struct iommu *obj, char *buf, ssize_t bytes)
{
int i, n;
int i, num;
struct cr_regs *cr;
char *p = buf;
cr = kcalloc(obj->nr_tlb_entries, sizeof(*cr), GFP_KERNEL);
num = bytes / sizeof(*cr);
num = min(obj->nr_tlb_entries, num);
cr = kcalloc(num, sizeof(*cr), GFP_KERNEL);
if (!cr)
return 0;
n = __dump_tlb_entries(obj, cr);
for (i = 0; i < n; i++)
num = __dump_tlb_entries(obj, cr, num);
for (i = 0; i < num; i++)
p += iotlb_dump_cr(obj, cr + i, p);
kfree(cr);
arch/arm/plat-omap/iovmm.c
+1 -1
View File
@@ -199,7 +199,7 @@ static void *vmap_sg(const struct sg_table *sgt)
va += bytes;
}
flush_cache_vmap(new->addr, total);
flush_cache_vmap(new->addr, new->addr + total);
return new->addr;
err_out:
arch/arm/plat-omap/omap-pm-noop.c
+296
View File
@@ -0,0 +1,296 @@
/*
* omap-pm-noop.c - OMAP power management interface - dummy version
*
* This code implements the OMAP power management interface to
* drivers, CPUIdle, CPUFreq, and DSP Bridge. It is strictly for
* debug/demonstration use, as it does nothing but printk() whenever a
* function is called (when DEBUG is defined, below)
*
* Copyright (C) 2008-2009 Texas Instruments, Inc.
* Copyright (C) 2008-2009 Nokia Corporation
* Paul Walmsley
*
* Interface developed by (in alphabetical order):
* Karthik Dasu, Tony Lindgren, Rajendra Nayak, Sakari Poussa, Veeramanikandan
* Raju, Anand Sawant, Igor Stoppa, Paul Walmsley, Richard Woodruff
*/
#undef DEBUG
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/device.h>
/* Interface documentation is in mach/omap-pm.h */
#include <mach/omap-pm.h>
#include <mach/powerdomain.h>
struct omap_opp *dsp_opps;
struct omap_opp *mpu_opps;
struct omap_opp *l3_opps;
/*
* Device-driver-originated constraints (via board-*.c files)
*/
void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t)
{
if (!dev || t < -1) {
WARN_ON(1);
return;
};
if (t == -1)
pr_debug("OMAP PM: remove max MPU wakeup latency constraint: "
"dev %s\n", dev_name(dev));
else
pr_debug("OMAP PM: add max MPU wakeup latency constraint: "
"dev %s, t = %ld usec\n", dev_name(dev), t);
/*
* For current Linux, this needs to map the MPU to a
* powerdomain, then go through the list of current max lat
* constraints on the MPU and find the smallest. If
* the latency constraint has changed, the code should
* recompute the state to enter for the next powerdomain
* state.
*
* TI CDP code can call constraint_set here.
*/
}
void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r)
{
if (!dev || (agent_id != OCP_INITIATOR_AGENT &&
agent_id != OCP_TARGET_AGENT)) {
WARN_ON(1);
return;
};
if (r == 0)
pr_debug("OMAP PM: remove min bus tput constraint: "
"dev %s for agent_id %d\n", dev_name(dev), agent_id);
else
pr_debug("OMAP PM: add min bus tput constraint: "
"dev %s for agent_id %d: rate %ld KiB\n",
dev_name(dev), agent_id, r);
/*
* This code should model the interconnect and compute the
* required clock frequency, convert that to a VDD2 OPP ID, then
* set the VDD2 OPP appropriately.
*
* TI CDP code can call constraint_set here on the VDD2 OPP.
*/
}
void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t)
{
if (!dev || t < -1) {
WARN_ON(1);
return;
};
if (t == -1)
pr_debug("OMAP PM: remove max device latency constraint: "
"dev %s\n", dev_name(dev));
else
pr_debug("OMAP PM: add max device latency constraint: "
"dev %s, t = %ld usec\n", dev_name(dev), t);
/*
* For current Linux, this needs to map the device to a
* powerdomain, then go through the list of current max lat
* constraints on that powerdomain and find the smallest. If
* the latency constraint has changed, the code should
* recompute the state to enter for the next powerdomain
* state. Conceivably, this code should also determine
* whether to actually disable the device clocks or not,
* depending on how long it takes to re-enable the clocks.
*
* TI CDP code can call constraint_set here.
*/
}
void omap_pm_set_max_sdma_lat(struct device *dev, long t)
{
if (!dev || t < -1) {
WARN_ON(1);
return;
};
if (t == -1)
pr_debug("OMAP PM: remove max DMA latency constraint: "
"dev %s\n", dev_name(dev));
else
pr_debug("OMAP PM: add max DMA latency constraint: "
"dev %s, t = %ld usec\n", dev_name(dev), t);
/*
* For current Linux PM QOS params, this code should scan the
* list of maximum CPU and DMA latencies and select the
* smallest, then set cpu_dma_latency pm_qos_param
* accordingly.
*
* For future Linux PM QOS params, with separate CPU and DMA
* latency params, this code should just set the dma_latency param.
*
* TI CDP code can call constraint_set here.
*/
}
/*
* DSP Bridge-specific constraints
*/
const struct omap_opp *omap_pm_dsp_get_opp_table(void)
{
pr_debug("OMAP PM: DSP request for OPP table\n");
/*
* Return DSP frequency table here: The final item in the
* array should have .rate = .opp_id = 0.
*/
return NULL;
}
void omap_pm_dsp_set_min_opp(u8 opp_id)
{
if (opp_id == 0) {
WARN_ON(1);
return;
}
pr_debug("OMAP PM: DSP requests minimum VDD1 OPP to be %d\n", opp_id);
/*
*
* For l-o dev tree, our VDD1 clk is keyed on OPP ID, so we
* can just test to see which is higher, the CPU's desired OPP
* ID or the DSP's desired OPP ID, and use whichever is
* highest.
*
* In CDP12.14+, the VDD1 OPP custom clock that controls the DSP
* rate is keyed on MPU speed, not the OPP ID. So we need to
* map the OPP ID to the MPU speed for use with clk_set_rate()
* if it is higher than the current OPP clock rate.
*
*/
}
u8 omap_pm_dsp_get_opp(void)
{
pr_debug("OMAP PM: DSP requests current DSP OPP ID\n");
/*
* For l-o dev tree, call clk_get_rate() on VDD1 OPP clock
*
* CDP12.14+:
* Call clk_get_rate() on the OPP custom clock, map that to an
* OPP ID using the tables defined in board-*.c/chip-*.c files.
*/
return 0;
}
/*
* CPUFreq-originated constraint
*
* In the future, this should be handled by custom OPP clocktype
* functions.
*/
struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void)
{
pr_debug("OMAP PM: CPUFreq request for frequency table\n");
/*
* Return CPUFreq frequency table here: loop over
* all VDD1 clkrates, pull out the mpu_ck frequencies, build
* table
*/
return NULL;
}
void omap_pm_cpu_set_freq(unsigned long f)
{
if (f == 0) {
WARN_ON(1);
return;
}
pr_debug("OMAP PM: CPUFreq requests CPU frequency to be set to %lu\n",
f);
/*
* For l-o dev tree, determine whether MPU freq or DSP OPP id
* freq is higher. Find the OPP ID corresponding to the
* higher frequency. Call clk_round_rate() and clk_set_rate()
* on the OPP custom clock.
*
* CDP should just be able to set the VDD1 OPP clock rate here.
*/
}
unsigned long omap_pm_cpu_get_freq(void)
{
pr_debug("OMAP PM: CPUFreq requests current CPU frequency\n");
/*
* Call clk_get_rate() on the mpu_ck.
*/
return 0;
}
/*
* Device context loss tracking
*/
int omap_pm_get_dev_context_loss_count(struct device *dev)
{
if (!dev) {
WARN_ON(1);
return -EINVAL;
};
pr_debug("OMAP PM: returning context loss count for dev %s\n",
dev_name(dev));
/*
* Map the device to the powerdomain. Return the powerdomain
* off counter.
*/
return 0;
}
/* Should be called before clk framework init */
int __init omap_pm_if_early_init(struct omap_opp *mpu_opp_table,
struct omap_opp *dsp_opp_table,
struct omap_opp *l3_opp_table)
{
mpu_opps = mpu_opp_table;
dsp_opps = dsp_opp_table;
l3_opps = l3_opp_table;
return 0;
}
/* Must be called after clock framework is initialized */
int __init omap_pm_if_init(void)
{
return 0;
}
void omap_pm_if_exit(void)
{
/* Deallocate CPUFreq frequency table here */
}
arch/arm/plat-omap/omap_device.c
+687
View File
@@ -0,0 +1,687 @@
/*
* omap_device implementation
*
* Copyright (C) 2009 Nokia Corporation
* Paul Walmsley
*
* Developed in collaboration with (alphabetical order): Benoit
* Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram
* Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
* Woodruff
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This code provides a consistent interface for OMAP device drivers
* to control power management and interconnect properties of their
* devices.
*
* In the medium- to long-term, this code should either be
* a) implemented via arch-specific pointers in platform_data
* or
* b) implemented as a proper omap_bus/omap_device in Linux, no more
* platform_data func pointers
*
*
* Guidelines for usage by driver authors:
*
* 1. These functions are intended to be used by device drivers via
* function pointers in struct platform_data. As an example,
* omap_device_enable() should be passed to the driver as
*
* struct foo_driver_platform_data {
* ...
* int (*device_enable)(struct platform_device *pdev);
* ...
* }
*
* Note that the generic "device_enable" name is used, rather than
* "omap_device_enable". This is so other architectures can pass in their
* own enable/disable functions here.
*
* This should be populated during device setup:
*
* ...
* pdata->device_enable = omap_device_enable;
* ...
*
* 2. Drivers should first check to ensure the function pointer is not null
* before calling it, as in:
*
* if (pdata->device_enable)
* pdata->device_enable(pdev);
*
* This allows other architectures that don't use similar device_enable()/
* device_shutdown() functions to execute normally.
*
* ...
*
* Suggested usage by device drivers:
*
* During device initialization:
* device_enable()
*
* During device idle:
* (save remaining device context if necessary)
* device_idle();
*
* During device resume:
* device_enable();
* (restore context if necessary)
*
* During device shutdown:
* device_shutdown()
* (device must be reinitialized at this point to use it again)
*
*/
#undef DEBUG
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/err.h>
#include <linux/io.h>
#include <mach/omap_device.h>
#include <mach/omap_hwmod.h>
/* These parameters are passed to _omap_device_{de,}activate() */
#define USE_WAKEUP_LAT 0
#define IGNORE_WAKEUP_LAT 1
/* XXX this should be moved into a separate file */
#if defined(CONFIG_ARCH_OMAP2420)
# define OMAP_32KSYNCT_BASE 0x48004000
#elif defined(CONFIG_ARCH_OMAP2430)
# define OMAP_32KSYNCT_BASE 0x49020000
#elif defined(CONFIG_ARCH_OMAP3430)
# define OMAP_32KSYNCT_BASE 0x48320000
#else
# error Unknown OMAP device
#endif
/* Private functions */
/**
* _read_32ksynct - read the OMAP 32K sync timer
*
* Returns the current value of the 32KiHz synchronization counter.
* XXX this should be generalized to simply read the system clocksource.
* XXX this should be moved to a separate synctimer32k.c file
*/
static u32 _read_32ksynct(void)
{
if (!cpu_class_is_omap2())
BUG();
return __raw_readl(OMAP2_IO_ADDRESS(OMAP_32KSYNCT_BASE + 0x010));
}
/**
* _omap_device_activate - increase device readiness
* @od: struct omap_device *
* @ignore_lat: increase to latency target (0) or full readiness (1)?
*
* Increase readiness of omap_device @od (thus decreasing device
* wakeup latency, but consuming more power). If @ignore_lat is
* IGNORE_WAKEUP_LAT, make the omap_device fully active. Otherwise,
* if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup
* latency is greater than the requested maximum wakeup latency, step
* backwards in the omap_device_pm_latency table to ensure the
* device's maximum wakeup latency is less than or equal to the
* requested maximum wakeup latency. Returns 0.
*/
static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
{
u32 a, b;
pr_debug("omap_device: %s: activating\n", od->pdev.name);
while (od->pm_lat_level > 0) {
struct omap_device_pm_latency *odpl;
int act_lat = 0;
od->pm_lat_level--;
odpl = od->pm_lats + od->pm_lat_level;
if (!ignore_lat &&
(od->dev_wakeup_lat <= od->_dev_wakeup_lat_limit))
break;
a = _read_32ksynct();
/* XXX check return code */
odpl->activate_func(od);
b = _read_32ksynct();
act_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */
pr_debug("omap_device: %s: pm_lat %d: activate: elapsed time "
"%d usec\n", od->pdev.name, od->pm_lat_level, act_lat);
WARN(act_lat > odpl->activate_lat, "omap_device: %s.%d: "
"activate step %d took longer than expected (%d > %d)\n",
od->pdev.name, od->pdev.id, od->pm_lat_level,
act_lat, odpl->activate_lat);
od->dev_wakeup_lat -= odpl->activate_lat;
}
return 0;
}
/**
* _omap_device_deactivate - decrease device readiness
* @od: struct omap_device *
* @ignore_lat: decrease to latency target (0) or full inactivity (1)?
*
* Decrease readiness of omap_device @od (thus increasing device
* wakeup latency, but conserving power). If @ignore_lat is
* IGNORE_WAKEUP_LAT, make the omap_device fully inactive. Otherwise,
* if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup
* latency is less than the requested maximum wakeup latency, step
* forwards in the omap_device_pm_latency table to ensure the device's
* maximum wakeup latency is less than or equal to the requested
* maximum wakeup latency. Returns 0.
*/
static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
{
u32 a, b;
pr_debug("omap_device: %s: deactivating\n", od->pdev.name);
while (od->pm_lat_level < od->pm_lats_cnt) {
struct omap_device_pm_latency *odpl;
int deact_lat = 0;
odpl = od->pm_lats + od->pm_lat_level;
if (!ignore_lat &&
((od->dev_wakeup_lat + odpl->activate_lat) >
od->_dev_wakeup_lat_limit))
break;
a = _read_32ksynct();
/* XXX check return code */
odpl->deactivate_func(od);
b = _read_32ksynct();
deact_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */
pr_debug("omap_device: %s: pm_lat %d: deactivate: elapsed time "
"%d usec\n", od->pdev.name, od->pm_lat_level,
deact_lat);
WARN(deact_lat > odpl->deactivate_lat, "omap_device: %s.%d: "
"deactivate step %d took longer than expected (%d > %d)\n",
od->pdev.name, od->pdev.id, od->pm_lat_level,
deact_lat, odpl->deactivate_lat);
od->dev_wakeup_lat += odpl->activate_lat;
od->pm_lat_level++;
}
return 0;
}
static inline struct omap_device *_find_by_pdev(struct platform_device *pdev)
{
return container_of(pdev, struct omap_device, pdev);
}
/* Public functions for use by core code */
/**
* omap_device_count_resources - count number of struct resource entries needed
* @od: struct omap_device *
*
* Count the number of struct resource entries needed for this
* omap_device @od. Used by omap_device_build_ss() to determine how
* much memory to allocate before calling
* omap_device_fill_resources(). Returns the count.
*/
int omap_device_count_resources(struct omap_device *od)
{
struct omap_hwmod *oh;
int c = 0;
int i;
for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
c += omap_hwmod_count_resources(oh);
pr_debug("omap_device: %s: counted %d total resources across %d "
"hwmods\n", od->pdev.name, c, od->hwmods_cnt);
return c;
}
/**
* omap_device_fill_resources - fill in array of struct resource
* @od: struct omap_device *
* @res: pointer to an array of struct resource to be filled in
*
* Populate one or more empty struct resource pointed to by @res with
* the resource data for this omap_device @od. Used by
* omap_device_build_ss() after calling omap_device_count_resources().
* Ideally this function would not be needed at all. If omap_device
* replaces platform_device, then we can specify our own
* get_resource()/ get_irq()/etc functions that use the underlying
* omap_hwmod information. Or if platform_device is extended to use
* subarchitecture-specific function pointers, the various
* platform_device functions can simply call omap_device internal
* functions to get device resources. Hacking around the existing
* platform_device code wastes memory. Returns 0.
*/
int omap_device_fill_resources(struct omap_device *od, struct resource *res)
{
struct omap_hwmod *oh;
int c = 0;
int i, r;
for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++) {
r = omap_hwmod_fill_resources(oh, res);
res += r;
c += r;
}
return 0;
}
/**
* omap_device_build - build and register an omap_device with one omap_hwmod
* @pdev_name: name of the platform_device driver to use
* @pdev_id: this platform_device's connection ID
* @oh: ptr to the single omap_hwmod that backs this omap_device
* @pdata: platform_data ptr to associate with the platform_device
* @pdata_len: amount of memory pointed to by @pdata
* @pm_lats: pointer to a omap_device_pm_latency array for this device
* @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
*
* Convenience function for building and registering a single
* omap_device record, which in turn builds and registers a
* platform_device record. See omap_device_build_ss() for more
* information. Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise,
* passes along the return value of omap_device_build_ss().
*/
struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
struct omap_hwmod *oh, void *pdata,
int pdata_len,
struct omap_device_pm_latency *pm_lats,
int pm_lats_cnt)
{
struct omap_hwmod *ohs[] = { oh };
if (!oh)
return ERR_PTR(-EINVAL);
return omap_device_build_ss(pdev_name, pdev_id, ohs, 1, pdata,
pdata_len, pm_lats, pm_lats_cnt);
}
/**
* omap_device_build_ss - build and register an omap_device with multiple hwmods
* @pdev_name: name of the platform_device driver to use
* @pdev_id: this platform_device's connection ID
* @oh: ptr to the single omap_hwmod that backs this omap_device
* @pdata: platform_data ptr to associate with the platform_device
* @pdata_len: amount of memory pointed to by @pdata
* @pm_lats: pointer to a omap_device_pm_latency array for this device
* @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
*
* Convenience function for building and registering an omap_device
* subsystem record. Subsystem records consist of multiple
* omap_hwmods. This function in turn builds and registers a
* platform_device record. Returns an ERR_PTR() on error, or passes
* along the return value of omap_device_register().
*/
struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
struct omap_hwmod **ohs, int oh_cnt,
void *pdata, int pdata_len,
struct omap_device_pm_latency *pm_lats,
int pm_lats_cnt)
{
int ret = -ENOMEM;
struct omap_device *od;
char *pdev_name2;
struct resource *res = NULL;
int res_count;
struct omap_hwmod **hwmods;
if (!ohs || oh_cnt == 0 || !pdev_name)
return ERR_PTR(-EINVAL);
if (!pdata && pdata_len > 0)
return ERR_PTR(-EINVAL);
pr_debug("omap_device: %s: building with %d hwmods\n", pdev_name,
oh_cnt);
od = kzalloc(sizeof(struct omap_device), GFP_KERNEL);
if (!od)
return ERR_PTR(-ENOMEM);
od->hwmods_cnt = oh_cnt;
hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt,
GFP_KERNEL);
if (!hwmods)
goto odbs_exit1;
memcpy(hwmods, ohs, sizeof(struct omap_hwmod *) * oh_cnt);
od->hwmods = hwmods;
pdev_name2 = kzalloc(strlen(pdev_name) + 1, GFP_KERNEL);
if (!pdev_name2)
goto odbs_exit2;
strcpy(pdev_name2, pdev_name);
od->pdev.name = pdev_name2;
od->pdev.id = pdev_id;
res_count = omap_device_count_resources(od);
if (res_count > 0) {
res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
if (!res)
goto odbs_exit3;
}
omap_device_fill_resources(od, res);
od->pdev.num_resources = res_count;
od->pdev.resource = res;
platform_device_add_data(&od->pdev, pdata, pdata_len);
od->pm_lats = pm_lats;
od->pm_lats_cnt = pm_lats_cnt;
ret = omap_device_register(od);
if (ret)
goto odbs_exit4;
return od;
odbs_exit4:
kfree(res);
odbs_exit3:
kfree(pdev_name2);
odbs_exit2:
kfree(hwmods);
odbs_exit1:
kfree(od);
pr_err("omap_device: %s: build failed (%d)\n", pdev_name, ret);
return ERR_PTR(ret);
}
/**
* omap_device_register - register an omap_device with one omap_hwmod
* @od: struct omap_device * to register
*
* Register the omap_device structure. This currently just calls
* platform_device_register() on the underlying platform_device.
* Returns the return value of platform_device_register().
*/
int omap_device_register(struct omap_device *od)
{
pr_debug("omap_device: %s: registering\n", od->pdev.name);
return platform_device_register(&od->pdev);
}
/* Public functions for use by device drivers through struct platform_data */
/**
* omap_device_enable - fully activate an omap_device
* @od: struct omap_device * to activate
*
* Do whatever is necessary for the hwmods underlying omap_device @od
* to be accessible and ready to operate. This generally involves
* enabling clocks, setting SYSCONFIG registers; and in the future may
* involve remuxing pins. Device drivers should call this function
* (through platform_data function pointers) where they would normally
* enable clocks, etc. Returns -EINVAL if called when the omap_device
* is already enabled, or passes along the return value of
* _omap_device_activate().
*/
int omap_device_enable(struct platform_device *pdev)
{
int ret;
struct omap_device *od;
od = _find_by_pdev(pdev);
if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
WARN(1, "omap_device: %s.%d: omap_device_enable() called from "
"invalid state\n", od->pdev.name, od->pdev.id);
return -EINVAL;
}
/* Enable everything if we're enabling this device from scratch */
if (od->_state == OMAP_DEVICE_STATE_UNKNOWN)
od->pm_lat_level = od->pm_lats_cnt;
ret = _omap_device_activate(od, IGNORE_WAKEUP_LAT);
od->dev_wakeup_lat = 0;
od->_dev_wakeup_lat_limit = INT_MAX;
od->_state = OMAP_DEVICE_STATE_ENABLED;
return ret;
}
/**
* omap_device_idle - idle an omap_device
* @od: struct omap_device * to idle
*
* Idle omap_device @od by calling as many .deactivate_func() entries
* in the omap_device's pm_lats table as is possible without exceeding
* the device's maximum wakeup latency limit, pm_lat_limit. Device
* drivers should call this function (through platform_data function
* pointers) where they would normally disable clocks after operations
* complete, etc.. Returns -EINVAL if the omap_device is not
* currently enabled, or passes along the return value of
* _omap_device_deactivate().
*/
int omap_device_idle(struct platform_device *pdev)
{
int ret;
struct omap_device *od;
od = _find_by_pdev(pdev);
if (od->_state != OMAP_DEVICE_STATE_ENABLED) {
WARN(1, "omap_device: %s.%d: omap_device_idle() called from "
"invalid state\n", od->pdev.name, od->pdev.id);
return -EINVAL;
}
ret = _omap_device_deactivate(od, USE_WAKEUP_LAT);
od->_state = OMAP_DEVICE_STATE_IDLE;
return ret;
}
/**
* omap_device_shutdown - shut down an omap_device
* @od: struct omap_device * to shut down
*
* Shut down omap_device @od by calling all .deactivate_func() entries
* in the omap_device's pm_lats table and then shutting down all of
* the underlying omap_hwmods. Used when a device is being "removed"
* or a device driver is being unloaded. Returns -EINVAL if the
* omap_device is not currently enabled or idle, or passes along the
* return value of _omap_device_deactivate().
*/
int omap_device_shutdown(struct platform_device *pdev)
{
int ret, i;
struct omap_device *od;
struct omap_hwmod *oh;
od = _find_by_pdev(pdev);
if (od->_state != OMAP_DEVICE_STATE_ENABLED &&
od->_state != OMAP_DEVICE_STATE_IDLE) {
WARN(1, "omap_device: %s.%d: omap_device_shutdown() called "
"from invalid state\n", od->pdev.name, od->pdev.id);
return -EINVAL;
}
ret = _omap_device_deactivate(od, IGNORE_WAKEUP_LAT);
for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
omap_hwmod_shutdown(oh);
od->_state = OMAP_DEVICE_STATE_SHUTDOWN;
return ret;
}
/**
* omap_device_align_pm_lat - activate/deactivate device to match wakeup lat lim
* @od: struct omap_device *
*
* When a device's maximum wakeup latency limit changes, call some of
* the .activate_func or .deactivate_func function pointers in the
* omap_device's pm_lats array to ensure that the device's maximum
* wakeup latency is less than or equal to the new latency limit.
* Intended to be called by OMAP PM code whenever a device's maximum
* wakeup latency limit changes (e.g., via
* omap_pm_set_dev_wakeup_lat()). Returns 0 if nothing needs to be
* done (e.g., if the omap_device is not currently idle, or if the
* wakeup latency is already current with the new limit) or passes
* along the return value of _omap_device_deactivate() or
* _omap_device_activate().
*/
int omap_device_align_pm_lat(struct platform_device *pdev,
u32 new_wakeup_lat_limit)
{
int ret = -EINVAL;
struct omap_device *od;
od = _find_by_pdev(pdev);
if (new_wakeup_lat_limit == od->dev_wakeup_lat)
return 0;
od->_dev_wakeup_lat_limit = new_wakeup_lat_limit;
if (od->_state != OMAP_DEVICE_STATE_IDLE)
return 0;
else if (new_wakeup_lat_limit > od->dev_wakeup_lat)
ret = _omap_device_deactivate(od, USE_WAKEUP_LAT);
else if (new_wakeup_lat_limit < od->dev_wakeup_lat)
ret = _omap_device_activate(od, USE_WAKEUP_LAT);
return ret;
}
/**
* omap_device_get_pwrdm - return the powerdomain * associated with @od
* @od: struct omap_device *
*
* Return the powerdomain associated with the first underlying
* omap_hwmod for this omap_device. Intended for use by core OMAP PM
* code. Returns NULL on error or a struct powerdomain * upon
* success.
*/
struct powerdomain *omap_device_get_pwrdm(struct omap_device *od)
{
/*
* XXX Assumes that all omap_hwmod powerdomains are identical.
* This may not necessarily be true. There should be a sanity
* check in here to WARN() if any difference appears.
*/
if (!od->hwmods_cnt)
return NULL;
return omap_hwmod_get_pwrdm(od->hwmods[0]);
}
/*
* Public functions intended for use in omap_device_pm_latency
* .activate_func and .deactivate_func function pointers
*/
/**
* omap_device_enable_hwmods - call omap_hwmod_enable() on all hwmods
* @od: struct omap_device *od
*
* Enable all underlying hwmods. Returns 0.
*/
int omap_device_enable_hwmods(struct omap_device *od)
{
struct omap_hwmod *oh;
int i;
for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
omap_hwmod_enable(oh);
/* XXX pass along return value here? */
return 0;
}
/**
* omap_device_idle_hwmods - call omap_hwmod_idle() on all hwmods
* @od: struct omap_device *od
*
* Idle all underlying hwmods. Returns 0.
*/
int omap_device_idle_hwmods(struct omap_device *od)
{
struct omap_hwmod *oh;
int i;
for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
omap_hwmod_idle(oh);
/* XXX pass along return value here? */
return 0;
}
/**
* omap_device_disable_clocks - disable all main and interface clocks
* @od: struct omap_device *od
*
* Disable the main functional clock and interface clock for all of the
* omap_hwmods associated with the omap_device. Returns 0.
*/
int omap_device_disable_clocks(struct omap_device *od)
{
struct omap_hwmod *oh;
int i;
for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
omap_hwmod_disable_clocks(oh);
/* XXX pass along return value here? */
return 0;
}
/**
* omap_device_enable_clocks - enable all main and interface clocks
* @od: struct omap_device *od
*
* Enable the main functional clock and interface clock for all of the
* omap_hwmods associated with the omap_device. Returns 0.
*/
int omap_device_enable_clocks(struct omap_device *od)
{
struct omap_hwmod *oh;
int i;
for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
omap_hwmod_enable_clocks(oh);
/* XXX pass along return value here? */
return 0;
}
arch/arm/plat-omap/sram.c
+9 -9
View File
@@ -56,16 +56,16 @@
#define SRAM_BOOTLOADER_SZ 0x80
#endif
#define OMAP24XX_VA_REQINFOPERM0 IO_ADDRESS(0x68005048)
#define OMAP24XX_VA_READPERM0 IO_ADDRESS(0x68005050)
#define OMAP24XX_VA_WRITEPERM0 IO_ADDRESS(0x68005058)
#define OMAP24XX_VA_REQINFOPERM0 OMAP2_IO_ADDRESS(0x68005048)
#define OMAP24XX_VA_READPERM0 OMAP2_IO_ADDRESS(0x68005050)
#define OMAP24XX_VA_WRITEPERM0 OMAP2_IO_ADDRESS(0x68005058)
#define OMAP34XX_VA_REQINFOPERM0 IO_ADDRESS(0x68012848)
#define OMAP34XX_VA_READPERM0 IO_ADDRESS(0x68012850)
#define OMAP34XX_VA_WRITEPERM0 IO_ADDRESS(0x68012858)
#define OMAP34XX_VA_ADDR_MATCH2 IO_ADDRESS(0x68012880)
#define OMAP34XX_VA_SMS_RG_ATT0 IO_ADDRESS(0x6C000048)
#define OMAP34XX_VA_CONTROL_STAT IO_ADDRESS(0x480022F0)
#define OMAP34XX_VA_REQINFOPERM0 OMAP2_IO_ADDRESS(0x68012848)
#define OMAP34XX_VA_READPERM0 OMAP2_IO_ADDRESS(0x68012850)
#define OMAP34XX_VA_WRITEPERM0 OMAP2_IO_ADDRESS(0x68012858)
#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_IO_ADDRESS(0x68012880)
#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_IO_ADDRESS(0x6C000048)
#define OMAP34XX_VA_CONTROL_STAT OMAP2_IO_ADDRESS(0x480022F0)
#define GP_DEVICE 0x300