Merge tag 'staging-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and iio driver fixes from Greg KH:
 "Here are a number of small staging and iio driver fixes for reported
  issues for 4.15-rc3. Nothing major here, the majority is IIO issues,
  like normal, but there are also some small bugfixes for a few staging
  drivers as well.

  Full details are in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: stm32: fix adc/trigger link error
  iio: health: max30102: Temperature should be in milli Celsius
  iio: fix kernel-doc build errors
  iio: adc: meson-saradc: Meson8 and Meson8b do not have REG11 and REG13
  iio: adc: meson-saradc: initialize the bandgap correctly on older SoCs
  iio: adc: meson-saradc: fix the bit_idx of the adc_en clock
  iio: proximity: sx9500: Assign interrupt from GpioIo()
  iio: adc: cpcap: fix incorrect validation
  staging: octeon-usb: use __delay() instead of cvmx_wait()
  staging: rtl8188eu: Fix incorrect response to SIOCGIWESSID
  staging: ccree: fix leak of import() after init()
  staging: comedi: ni_atmio: fix license warning.

drivers/staging/ccree/ssi_hash.c

@@ -1778,9 +1778,12 @@ static int ssi_ahash_import(struct ahash_request *req, const void *in)
 	}
 	in += sizeof(u32);
 
-	rc = ssi_hash_init(state, ctx);
-	if (rc)
-		goto out;
+	/* call init() to allocate bufs if the user hasn't */
+	if (!state->digest_buff) {
+		rc = ssi_hash_init(state, ctx);
+		if (rc)
+			goto out;
+	}
 
 	dma_sync_single_for_cpu(dev, state->digest_buff_dma_addr,
 				ctx->inter_digestsize, DMA_BIDIRECTIONAL);

drivers/staging/comedi/drivers/ni_atmio.c

@@ -361,3 +361,8 @@ static struct comedi_driver ni_atmio_driver = {
 	.detach		= ni_atmio_detach,
 };
 module_comedi_driver(ni_atmio_driver);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
+

drivers/staging/octeon-usb/octeon-hcd.c

@@ -394,7 +394,7 @@ struct octeon_hcd {
 				result = -1;				    \
 				break;					    \
 			} else						    \
-				cvmx_wait(100);				    \
+				__delay(100);				    \
 		}							    \
 	} while (0);							    \
 	result; })
@@ -774,7 +774,7 @@ retry:
 	usbn_clk_ctl.s.hclk_rst = 1;
 	cvmx_write64_uint64(CVMX_USBNX_CLK_CTL(usb->index), usbn_clk_ctl.u64);
 	/* 2e.  Wait 64 core-clock cycles for HCLK to stabilize */
-	cvmx_wait(64);
+	__delay(64);
 	/*
 	 * 3. Program the power-on reset field in the USBN clock-control
 	 *    register:
@@ -795,7 +795,7 @@ retry:
 	cvmx_write64_uint64(CVMX_USBNX_USBP_CTL_STATUS(usb->index),
 			    usbn_usbp_ctl_status.u64);
 	/* 6. Wait 10 cycles */
-	cvmx_wait(10);
+	__delay(10);
 	/*
 	 * 7. Clear ATE_RESET field in the USBN clock-control register:
 	 *    USBN_USBP_CTL_STATUS[ATE_RESET] = 0

drivers/staging/rtl8188eu/os_dep/ioctl_linux.c

@@ -1395,19 +1395,13 @@ static int rtw_wx_get_essid(struct net_device *dev,
 	if ((check_fwstate(pmlmepriv, _FW_LINKED)) ||
 	    (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE))) {
 		len = pcur_bss->Ssid.SsidLength;
-
-		wrqu->essid.length = len;
-
 		memcpy(extra, pcur_bss->Ssid.Ssid, len);
-
-		wrqu->essid.flags = 1;
 	} else {
-		ret = -1;
-		goto exit;
+		len = 0;
+		*extra = 0;
 	}
-
-exit:
-
+	wrqu->essid.length = len;
+	wrqu->essid.flags = 1;
 
 	return ret;
 }