Merge tag 'asoc-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v3.12

- DAPM is now mandatory for CODEC drivers in order to avoid the repeated
  regressions in the special cases for non-DAPM CODECs and make it
  easier to integrate with other components on boards.  All existing
  drivers have had some level of DAPM support added.
- A lot of cleanups in DAPM plus support for maintaining controls in a
  specific state while a DAPM widget all contributed by Lars-Peter Clausen.
- Core helpers for bitbanged AC'97 reset from Markus Pargmann.
- New drivers and support for Analog Devices ADAU1702 and ADAU1401(a),
  Asahi Kasei Microdevices AK4554, Atmel AT91ASM9x5 and WM8904 based
  machines, Freescale S/PDIF and SSI AC'97, Renesas R-Car SoCs, Samsung
  Exynos5420 SoCs, Texas Instruments PCM1681 and PCM1792A and Wolfson
  Microelectronics WM8997.
- Support for building drivers that can support it cross-platform for
  compile test.

include/uapi/asm-generic/fcntl.h

@@ -89,8 +89,8 @@
 #endif
 
 /* a horrid kludge trying to make sure that this will fail on old kernels */
-#define O_TMPFILE (__O_TMPFILE | O_DIRECTORY | O_RDWR)
-#define O_TMPFILE_MASK (__O_TMPFILE | O_DIRECTORY | O_CREAT | O_ACCMODE)      
+#define O_TMPFILE (__O_TMPFILE | O_DIRECTORY)
+#define O_TMPFILE_MASK (__O_TMPFILE | O_DIRECTORY | O_CREAT)      
 
 #ifndef O_NDELAY
 #define O_NDELAY	O_NONBLOCK

include/uapi/linux/firewire-cdev.h

@@ -215,8 +215,8 @@ struct fw_cdev_event_request2 {
  * with the %FW_CDEV_ISO_INTERRUPT bit set, when explicitly requested with
  * %FW_CDEV_IOC_FLUSH_ISO, or when there have been so many completed packets
  * without the interrupt bit set that the kernel's internal buffer for @header
- * is about to overflow.  (In the last case, kernels with ABI version < 5 drop
- * header data up to the next interrupt packet.)
+ * is about to overflow.  (In the last case, ABI versions < 5 drop header data
+ * up to the next interrupt packet.)
  *
  * Isochronous transmit events (context type %FW_CDEV_ISO_CONTEXT_TRANSMIT):
  *

include/uapi/linux/nfc.h

@@ -69,8 +69,8 @@
  *	starting a poll from a device which has a secure element enabled means
  *	we want to do SE based card emulation.
  * @NFC_CMD_DISABLE_SE: Disable the physical link to a specific secure element.
- * @NFC_CMD_FW_UPLOAD: Request to Load/flash firmware, or event to inform that
- *	some firmware was loaded
+ * @NFC_CMD_FW_DOWNLOAD: Request to Load/flash firmware, or event to inform
+ *	that some firmware was loaded
  */
 enum nfc_commands {
 	NFC_CMD_UNSPEC,
@@ -94,7 +94,7 @@ enum nfc_commands {
 	NFC_CMD_DISABLE_SE,
 	NFC_CMD_LLC_SDREQ,
 	NFC_EVENT_LLC_SDRES,
-	NFC_CMD_FW_UPLOAD,
+	NFC_CMD_FW_DOWNLOAD,
 	NFC_EVENT_SE_ADDED,
 	NFC_EVENT_SE_REMOVED,
 /* private: internal use only */

include/uapi/linux/pkt_sched.h

@@ -73,9 +73,17 @@ struct tc_estimator {
 #define TC_H_ROOT	(0xFFFFFFFFU)
 #define TC_H_INGRESS    (0xFFFFFFF1U)
 
+/* Need to corrospond to iproute2 tc/tc_core.h "enum link_layer" */
+enum tc_link_layer {
+	TC_LINKLAYER_UNAWARE, /* Indicate unaware old iproute2 util */
+	TC_LINKLAYER_ETHERNET,
+	TC_LINKLAYER_ATM,
+};
+#define TC_LINKLAYER_MASK 0x0F /* limit use to lower 4 bits */
+
 struct tc_ratespec {
 	unsigned char	cell_log;
-	unsigned char	__reserved;
+	__u8		linklayer; /* lower 4 bits */
 	unsigned short	overhead;
 	short		cell_align;
 	unsigned short	mpu;

include/uapi/linux/snmp.h

@@ -253,7 +253,7 @@ enum
 	LINUX_MIB_TCPFASTOPENLISTENOVERFLOW,	/* TCPFastOpenListenOverflow */
 	LINUX_MIB_TCPFASTOPENCOOKIEREQD,	/* TCPFastOpenCookieReqd */
 	LINUX_MIB_TCPSPURIOUS_RTX_HOSTQUEUES, /* TCPSpuriousRtxHostQueues */
-	LINUX_MIB_LOWLATENCYRXPACKETS,		/* LowLatencyRxPackets */
+	LINUX_MIB_BUSYPOLLRXPACKETS,		/* BusyPollRxPackets */
 	__LINUX_MIB_MAX
 };
 

include/uapi/linux/usb/ch11.h

@@ -11,6 +11,17 @@
 
 #include <linux/types.h>	/* __u8 etc */
 
+/* This is arbitrary.
+ * From USB 2.0 spec Table 11-13, offset 7, a hub can
+ * have up to 255 ports. The most yet reported is 10.
+ *
+ * Current Wireless USB host hardware (Intel i1480 for example) allows
+ * up to 22 devices to connect. Upcoming hardware might raise that
+ * limit. Because the arrays need to add a bit for hub status data, we
+ * use 31, so plus one evens out to four bytes.
+ */
+#define USB_MAXCHILDREN		31
+
 /*
  * Hub request types
  */