Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (232 commits)
  USB: Add USB-ID for Multiplex RC serial adapter to cp210x.c
  xhci: Clean up 32-bit build warnings.
  USB: update documentation for usbmon
  usb: usb-storage doesn't support dynamic id currently, the patch disables the feature to fix an oops
  drivers/usb/class/cdc-acm.c: clear dangling pointer
  drivers/usb/dwc3/dwc3-pci.c: introduce missing kfree
  drivers/usb/host/isp1760-if.c: introduce missing kfree
  usb: option: add ZD Incorporated HSPA modem
  usb: ch9: fix up MaxStreams helper
  USB: usb-skeleton.c: cleanup open_count
  USB: usb-skeleton.c: fix open/disconnect race
  xhci: Properly handle COMP_2ND_BW_ERR
  USB: remove dead code from suspend/resume path
  USB: add quirk for another camera
  drivers: usb: wusbcore: Fix dependency for USB_WUSB
  xhci: Better debugging for critical host errors.
  xhci: Be less verbose during URB cancellation.
  xhci: Remove debugging about ring structure allocation.
  xhci: Remove debugging about toggling cycle bits.
  xhci: Remove debugging for individual transfers.
  ...

include/linux/nls.h

@@ -43,7 +43,7 @@ enum utf16_endian {
 	UTF16_BIG_ENDIAN
 };
 
-/* nls.c */
+/* nls_base.c */
 extern int register_nls(struct nls_table *);
 extern int unregister_nls(struct nls_table *);
 extern struct nls_table *load_nls(char *);
@@ -52,7 +52,8 @@ extern struct nls_table *load_nls_default(void);
 
 extern int utf8_to_utf32(const u8 *s, int len, unicode_t *pu);
 extern int utf32_to_utf8(unicode_t u, u8 *s, int maxlen);
-extern int utf8s_to_utf16s(const u8 *s, int len, wchar_t *pwcs);
+extern int utf8s_to_utf16s(const u8 *s, int len,
+		enum utf16_endian endian, wchar_t *pwcs, int maxlen);
 extern int utf16s_to_utf8s(const wchar_t *pwcs, int len,
 		enum utf16_endian endian, u8 *s, int maxlen);
 

include/linux/platform_data/mv_usb.h

@@ -42,9 +42,23 @@ struct mv_usb_platform_data {
 	/* only valid for HCD. OTG or Host only*/
 	unsigned int		mode;
 
-	int     (*phy_init)(unsigned int regbase);
-	void    (*phy_deinit)(unsigned int regbase);
+	/* This flag is used for that needs id pin checked by otg */
+	unsigned int    disable_otg_clock_gating:1;
+	/* Force a_bus_req to be asserted */
+	 unsigned int    otg_force_a_bus_req:1;
+
+	int	(*phy_init)(void __iomem *regbase);
+	void	(*phy_deinit)(void __iomem *regbase);
 	int	(*set_vbus)(unsigned int vbus);
+	int     (*private_init)(void __iomem *opregs, void __iomem *phyregs);
 };
 
+#ifndef CONFIG_HAVE_CLK
+/* Dummy stub for clk framework */
+#define clk_get(dev, id)       NULL
+#define clk_put(clock)         do {} while (0)
+#define clk_enable(clock)      do {} while (0)
+#define clk_disable(clock)     do {} while (0)
+#endif
+
 #endif

include/linux/platform_data/s3c-hsudc.h

@@ -0,0 +1,34 @@
+/*
+ * S3C24XX USB 2.0 High-speed USB controller gadget driver
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * The S3C24XX USB 2.0 high-speed USB controller supports upto 9 endpoints.
+ * Each endpoint can be configured as either in or out endpoint. Endpoints
+ * can be configured for Bulk or Interrupt transfer mode.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __LINUX_USB_S3C_HSUDC_H
+#define __LINUX_USB_S3C_HSUDC_H
+
+/**
+ * s3c24xx_hsudc_platdata - Platform data for USB High-Speed gadget controller.
+ * @epnum: Number of endpoints to be instantiated by the controller driver.
+ * @gpio_init: Platform specific USB related GPIO initialization.
+ * @gpio_uninit: Platform specific USB releted GPIO uninitialzation.
+ *
+ * Representation of platform data for the S3C24XX USB 2.0 High Speed gadget
+ * controllers.
+ */
+struct s3c24xx_hsudc_platdata {
+	unsigned int	epnum;
+	void		(*gpio_init)(void);
+	void		(*gpio_uninit)(void);
+};
+
+#endif	/* __LINUX_USB_S3C_HSUDC_H */

include/linux/usb.h

@@ -1233,6 +1233,7 @@ struct urb {
 	void *transfer_buffer;		/* (in) associated data buffer */
 	dma_addr_t transfer_dma;	/* (in) dma addr for transfer_buffer */
 	struct scatterlist *sg;		/* (in) scatter gather buffer list */
+	int num_mapped_sgs;		/* (internal) mapped sg entries */
 	int num_sgs;			/* (in) number of entries in the sg list */
 	u32 transfer_buffer_length;	/* (in) data buffer length */
 	u32 actual_length;		/* (return) actual transfer length */
@@ -1610,6 +1611,19 @@ usb_maxpacket(struct usb_device *udev, int pipe, int is_out)
 
 /* ----------------------------------------------------------------------- */
 
+/* translate USB error codes to codes user space understands */
+static inline int usb_translate_errors(int error_code)
+{
+	switch (error_code) {
+	case 0:
+	case -ENOMEM:
+	case -ENODEV:
+		return error_code;
+	default:
+		return -EIO;
+	}
+}
+
 /* Events from the usb core */
 #define USB_DEVICE_ADD		0x0001
 #define USB_DEVICE_REMOVE	0x0002

include/linux/usb/ch11.h

@@ -26,7 +26,6 @@
 #define HUB_RESET_TT		9
 #define HUB_GET_TT_STATE	10
 #define HUB_STOP_TT		11
-#define HUB_SET_DEPTH		12
 
 /*
  * Hub class additional requests defined by USB 3.0 spec
@@ -165,11 +164,20 @@ struct usb_port_status {
  * wHubCharacteristics (masks)
  * See USB 2.0 spec Table 11-13, offset 3
  */
-#define HUB_CHAR_LPSM		0x0003 /* D1 .. D0 */
-#define HUB_CHAR_COMPOUND	0x0004 /* D2       */
-#define HUB_CHAR_OCPM		0x0018 /* D4 .. D3 */
-#define HUB_CHAR_TTTT           0x0060 /* D6 .. D5 */
-#define HUB_CHAR_PORTIND        0x0080 /* D7       */
+#define HUB_CHAR_LPSM		0x0003 /* Logical Power Switching Mode mask */
+#define HUB_CHAR_COMMON_LPSM	0x0000 /* All ports power control at once */
+#define HUB_CHAR_INDV_PORT_LPSM	0x0001 /* per-port power control */
+#define HUB_CHAR_NO_LPSM	0x0002 /* no power switching */
+
+#define HUB_CHAR_COMPOUND	0x0004 /* hub is part of a compound device */
+
+#define HUB_CHAR_OCPM		0x0018 /* Over-Current Protection Mode mask */
+#define HUB_CHAR_COMMON_OCPM	0x0000 /* All ports Over-Current reporting */
+#define HUB_CHAR_INDV_PORT_OCPM	0x0008 /* per-port Over-current reporting */
+#define HUB_CHAR_NO_OCPM	0x0010 /* No Over-current Protection support */
+
+#define HUB_CHAR_TTTT		0x0060 /* TT Think Time mask */
+#define HUB_CHAR_PORTIND	0x0080 /* per-port indicators (LEDs) */
 
 struct usb_hub_status {
 	__le16 wHubStatus;
@@ -198,6 +206,17 @@ struct usb_hub_status {
 #define USB_DT_HUB_NONVAR_SIZE		7
 #define USB_DT_SS_HUB_SIZE              12
 
+/*
+ * Hub Device descriptor
+ * USB Hub class device protocols
+ */
+
+#define USB_HUB_PR_FS		0 /* Full speed hub */
+#define USB_HUB_PR_HS_NO_TT	0 /* Hi-speed hub without TT */
+#define USB_HUB_PR_HS_SINGLE_TT	1 /* Hi-speed hub with single TT */
+#define USB_HUB_PR_HS_MULTI_TT	2 /* Hi-speed hub with multiple TT */
+#define USB_HUB_PR_SS		3 /* Super speed hub */
+
 struct usb_hub_descriptor {
 	__u8  bDescLength;
 	__u8  bDescriptorType;

include/linux/usb/ch9.h

@@ -605,8 +605,26 @@ struct usb_ss_ep_comp_descriptor {
 } __attribute__ ((packed));
 
 #define USB_DT_SS_EP_COMP_SIZE		6
+
 /* Bits 4:0 of bmAttributes if this is a bulk endpoint */
-#define USB_SS_MAX_STREAMS(p)		(1 << ((p) & 0x1f))
+static inline int
+usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp)
+{
+	int		max_streams;
+
+	if (!comp)
+		return 0;
+
+	max_streams = comp->bmAttributes & 0x1f;
+
+	if (!max_streams)
+		return 0;
+
+	max_streams = 1 << max_streams;
+
+	return max_streams;
+}
+
 /* Bits 1:0 of bmAttributes if this is an isoc endpoint */
 #define USB_SS_MULT(p)			(1 + ((p) & 0x3))
 

include/linux/usb/gadget.h

@@ -20,6 +20,7 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/slab.h>
+#include <linux/scatterlist.h>
 #include <linux/types.h>
 #include <linux/usb/ch9.h>
 
@@ -32,6 +33,9 @@ struct usb_ep;
  * @dma: DMA address corresponding to 'buf'.  If you don't set this
  *	field, and the usb controller needs one, it is responsible
  *	for mapping and unmapping the buffer.
+ * @sg: a scatterlist for SG-capable controllers.
+ * @num_sgs: number of SG entries
+ * @num_mapped_sgs: number of SG entries mapped to DMA (internal)
  * @length: Length of that data
  * @stream_id: The stream id, when USB3.0 bulk streams are being used
  * @no_interrupt: If true, hints that no completion irq is needed.
@@ -88,6 +92,10 @@ struct usb_request {
 	unsigned		length;
 	dma_addr_t		dma;
 
+	struct scatterlist	*sg;
+	unsigned		num_sgs;
+	unsigned		num_mapped_sgs;
+
 	unsigned		stream_id:16;
 	unsigned		no_interrupt:1;
 	unsigned		zero:1;
@@ -164,7 +172,7 @@ struct usb_ep {
 	unsigned		maxpacket:16;
 	unsigned		max_streams:16;
 	unsigned		mult:2;
-	unsigned		maxburst:4;
+	unsigned		maxburst:5;
 	u8			address;
 	const struct usb_endpoint_descriptor	*desc;
 	const struct usb_ss_ep_comp_descriptor	*comp_desc;
@@ -477,8 +485,9 @@ struct usb_gadget_ops {
  *	driver setup() requests
  * @ep_list: List of other endpoints supported by the device.
  * @speed: Speed of current connection to USB host.
- * @is_dualspeed: True if the controller supports both high and full speed
- *	operation.  If it does, the gadget driver must also support both.
+ * @max_speed: Maximal speed the UDC can handle.  UDC must support this
+ *      and all slower speeds.
+ * @sg_supported: true if we can handle scatter-gather
  * @is_otg: True if the USB device port uses a Mini-AB jack, so that the
  *	gadget driver must provide a USB OTG descriptor.
  * @is_a_peripheral: False unless is_otg, the "A" end of a USB cable
@@ -518,7 +527,8 @@ struct usb_gadget {
 	struct usb_ep			*ep0;
 	struct list_head		ep_list;	/* of usb_ep */
 	enum usb_device_speed		speed;
-	unsigned			is_dualspeed:1;
+	enum usb_device_speed		max_speed;
+	unsigned			sg_supported:1;
 	unsigned			is_otg:1;
 	unsigned			is_a_peripheral:1;
 	unsigned			b_hnp_enable:1;
@@ -549,7 +559,7 @@ static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev)
 static inline int gadget_is_dualspeed(struct usb_gadget *g)
 {
 #ifdef CONFIG_USB_GADGET_DUALSPEED
-	/* runtime test would check "g->is_dualspeed" ... that might be
+	/* runtime test would check "g->max_speed" ... that might be
 	 * useful to work around hardware bugs, but is mostly pointless
 	 */
 	return 1;
@@ -567,7 +577,7 @@ static inline int gadget_is_superspeed(struct usb_gadget *g)
 {
 #ifdef CONFIG_USB_GADGET_SUPERSPEED
 	/*
-	 * runtime test would check "g->is_superspeed" ... that might be
+	 * runtime test would check "g->max_speed" ... that might be
 	 * useful to work around hardware bugs, but is mostly pointless
 	 */
 	return 1;
@@ -760,7 +770,7 @@ static inline int usb_gadget_disconnect(struct usb_gadget *gadget)
 /**
  * struct usb_gadget_driver - driver for usb 'slave' devices
  * @function: String describing the gadget's function
- * @speed: Highest speed the driver handles.
+ * @max_speed: Highest speed the driver handles.
  * @setup: Invoked for ep0 control requests that aren't handled by
  *	the hardware level driver. Most calls must be handled by
  *	the gadget driver, including descriptor and configuration
@@ -824,7 +834,7 @@ static inline int usb_gadget_disconnect(struct usb_gadget *gadget)
  */
 struct usb_gadget_driver {
 	char			*function;
-	enum usb_device_speed	speed;
+	enum usb_device_speed	max_speed;
 	void			(*unbind)(struct usb_gadget *);
 	int			(*setup)(struct usb_gadget *,
 					const struct usb_ctrlrequest *);

include/linux/usb/hcd.h

@@ -99,7 +99,6 @@ struct usb_hcd {
 	 */
 	unsigned long		flags;
 #define HCD_FLAG_HW_ACCESSIBLE		0	/* at full power */
-#define HCD_FLAG_SAW_IRQ		1
 #define HCD_FLAG_POLL_RH		2	/* poll for rh status? */
 #define HCD_FLAG_POLL_PENDING		3	/* status has changed? */
 #define HCD_FLAG_WAKEUP_PENDING		4	/* root hub is resuming? */
@@ -110,7 +109,6 @@ struct usb_hcd {
 	 * be slightly faster than test_bit().
 	 */
 #define HCD_HW_ACCESSIBLE(hcd)	((hcd)->flags & (1U << HCD_FLAG_HW_ACCESSIBLE))
-#define HCD_SAW_IRQ(hcd)	((hcd)->flags & (1U << HCD_FLAG_SAW_IRQ))
 #define HCD_POLL_RH(hcd)	((hcd)->flags & (1U << HCD_FLAG_POLL_RH))
 #define HCD_POLL_PENDING(hcd)	((hcd)->flags & (1U << HCD_FLAG_POLL_PENDING))
 #define HCD_WAKEUP_PENDING(hcd)	((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING))

include/linux/usb/renesas_usbhs.h

@@ -64,6 +64,14 @@ struct renesas_usbhs_platform_callback {
 	 */
 	void (*hardware_exit)(struct platform_device *pdev);
 
+	/*
+	 * option:
+	 *
+	 * for board specific clock control
+	 */
+	void (*power_ctrl)(struct platform_device *pdev,
+			   void __iomem *base, int enable);
+
 	/*
 	 * option:
 	 *
@@ -118,7 +126,7 @@ struct renesas_usbhs_driver_param {
 	 *
 	 * delay time from notify_hotplug callback
 	 */
-	int detection_delay;
+	int detection_delay; /* msec */
 
 	/*
 	 * option:

include/linux/usb/serial.h

@@ -58,11 +58,13 @@ enum port_dev_state {
  * @read_urb: pointer to the bulk in struct urb for this port.
  * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this
  *	port.
+ * @bulk_in_buffers: pointers to the bulk in buffers for this port
+ * @read_urbs: pointers to the bulk in urbs for this port
+ * @read_urbs_free: status bitmap the for bulk in urbs
  * @bulk_out_buffer: pointer to the bulk out buffer for this port.
  * @bulk_out_size: the size of the bulk_out_buffer, in bytes.
  * @write_urb: pointer to the bulk out struct urb for this port.
  * @write_fifo: kfifo used to buffer outgoing data
- * @write_urb_busy: port`s writing status
  * @bulk_out_buffers: pointers to the bulk out buffers for this port
  * @write_urbs: pointers to the bulk out urbs for this port
  * @write_urbs_free: status bitmap the for bulk out urbs
@@ -99,11 +101,14 @@ struct usb_serial_port {
 	struct urb		*read_urb;
 	__u8			bulk_in_endpointAddress;
 
+	unsigned char		*bulk_in_buffers[2];
+	struct urb		*read_urbs[2];
+	unsigned long		read_urbs_free;
+
 	unsigned char		*bulk_out_buffer;
 	int			bulk_out_size;
 	struct urb		*write_urb;
 	struct kfifo		write_fifo;
-	int			write_urb_busy;
 
 	unsigned char		*bulk_out_buffers[2];
 	struct urb		*write_urbs[2];
@@ -340,7 +345,7 @@ extern void usb_serial_generic_disconnect(struct usb_serial *serial);
 extern void usb_serial_generic_release(struct usb_serial *serial);
 extern int usb_serial_generic_register(int debug);
 extern void usb_serial_generic_deregister(void);
-extern int usb_serial_generic_submit_read_urb(struct usb_serial_port *port,
+extern int usb_serial_generic_submit_read_urbs(struct usb_serial_port *port,
 						 gfp_t mem_flags);
 extern void usb_serial_generic_process_read_urb(struct urb *urb);
 extern int usb_serial_generic_prepare_write_buffer(struct usb_serial_port *port,