Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "x86:

   - Support for userspace to emulate Xen hypercalls

   - Raise the maximum number of user memslots

   - Scalability improvements for the new MMU.

     Instead of the complex "fast page fault" logic that is used in
     mmu.c, tdp_mmu.c uses an rwlock so that page faults are concurrent,
     but the code that can run against page faults is limited. Right now
     only page faults take the lock for reading; in the future this will
     be extended to some cases of page table destruction. I hope to
     switch the default MMU around 5.12-rc3 (some testing was delayed
     due to Chinese New Year).

   - Cleanups for MAXPHYADDR checks

   - Use static calls for vendor-specific callbacks

   - On AMD, use VMLOAD/VMSAVE to save and restore host state

   - Stop using deprecated jump label APIs

   - Workaround for AMD erratum that made nested virtualization
     unreliable

   - Support for LBR emulation in the guest

   - Support for communicating bus lock vmexits to userspace

   - Add support for SEV attestation command

   - Miscellaneous cleanups

  PPC:

   - Support for second data watchpoint on POWER10

   - Remove some complex workarounds for buggy early versions of POWER9

   - Guest entry/exit fixes

  ARM64:

   - Make the nVHE EL2 object relocatable

   - Cleanups for concurrent translation faults hitting the same page

   - Support for the standard TRNG hypervisor call

   - A bunch of small PMU/Debug fixes

   - Simplification of the early init hypercall handling

  Non-KVM changes (with acks):

   - Detection of contended rwlocks (implemented only for qrwlocks,
     because KVM only needs it for x86)

   - Allow __DISABLE_EXPORTS from assembly code

   - Provide a saner follow_pfn replacements for modules"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (192 commits)
  KVM: x86/xen: Explicitly pad struct compat_vcpu_info to 64 bytes
  KVM: selftests: Don't bother mapping GVA for Xen shinfo test
  KVM: selftests: Fix hex vs. decimal snafu in Xen test
  KVM: selftests: Fix size of memslots created by Xen tests
  KVM: selftests: Ignore recently added Xen tests' build output
  KVM: selftests: Add missing header file needed by xAPIC IPI tests
  KVM: selftests: Add operand to vmsave/vmload/vmrun in svm.c
  KVM: SVM: Make symbol 'svm_gp_erratum_intercept' static
  locking/arch: Move qrwlock.h include after qspinlock.h
  KVM: PPC: Book3S HV: Fix host radix SLB optimisation with hash guests
  KVM: PPC: Book3S HV: Ensure radix guest has no SLB entries
  KVM: PPC: Don't always report hash MMU capability for P9 < DD2.2
  KVM: PPC: Book3S HV: Save and restore FSCR in the P9 path
  KVM: PPC: remove unneeded semicolon
  KVM: PPC: Book3S HV: Use POWER9 SLBIA IH=6 variant to clear SLB
  KVM: PPC: Book3S HV: No need to clear radix host SLB before loading HPT guest
  KVM: PPC: Book3S HV: Fix radix guest SLB side channel
  KVM: PPC: Book3S HV: Remove support for running HPT guest on RPT host without mixed mode support
  KVM: PPC: Book3S HV: Introduce new capability for 2nd DAWR
  KVM: PPC: Book3S HV: Add infrastructure to support 2nd DAWR
  ...

Documentation/virt/kvm/amd-memory-encryption.rst

@@ -263,6 +263,27 @@ Returns: 0 on success, -negative on error
                 __u32 trans_len;
         };
 
+10. KVM_SEV_GET_ATTESTATION_REPORT
+----------------------------------
+
+The KVM_SEV_GET_ATTESTATION_REPORT command can be used by the hypervisor to query the attestation
+report containing the SHA-256 digest of the guest memory and VMSA passed through the KVM_SEV_LAUNCH
+commands and signed with the PEK. The digest returned by the command should match the digest
+used by the guest owner with the KVM_SEV_LAUNCH_MEASURE.
+
+Parameters (in): struct kvm_sev_attestation
+
+Returns: 0 on success, -negative on error
+
+::
+
+        struct kvm_sev_attestation_report {
+                __u8 mnonce[16];        /* A random mnonce that will be placed in the report */
+
+                __u64 uaddr;            /* userspace address where the report should be copied */
+                __u32 len;
+        };
+
 References
 ==========
 

Documentation/virt/kvm/api.rst

@@ -960,6 +960,14 @@ memory.
 	__u8 pad2[30];
   };
 
+If the KVM_XEN_HVM_CONFIG_INTERCEPT_HCALL flag is returned from the
+KVM_CAP_XEN_HVM check, it may be set in the flags field of this ioctl.
+This requests KVM to generate the contents of the hypercall page
+automatically; hypercalls will be intercepted and passed to userspace
+through KVM_EXIT_XEN.  In this case, all of the blob size and address
+fields must be zero.
+
+No other flags are currently valid in the struct kvm_xen_hvm_config.
 
 4.29 KVM_GET_CLOCK
 ------------------
@@ -2268,6 +2276,8 @@ registers, find a list below:
   PPC     KVM_REG_PPC_PSSCR               64
   PPC     KVM_REG_PPC_DEC_EXPIRY          64
   PPC     KVM_REG_PPC_PTCR                64
+  PPC     KVM_REG_PPC_DAWR1               64
+  PPC     KVM_REG_PPC_DAWRX1              64
   PPC     KVM_REG_PPC_TM_GPR0             64
   ...
   PPC     KVM_REG_PPC_TM_GPR31            64
@@ -4831,6 +4841,101 @@ into user space.
 If a vCPU is in running state while this ioctl is invoked, the vCPU may
 experience inconsistent filtering behavior on MSR accesses.
 
+4.127 KVM_XEN_HVM_SET_ATTR
+--------------------------
+
+:Capability: KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_SHARED_INFO
+:Architectures: x86
+:Type: vm ioctl
+:Parameters: struct kvm_xen_hvm_attr
+:Returns: 0 on success, < 0 on error
+
+::
+
+  struct kvm_xen_hvm_attr {
+	__u16 type;
+	__u16 pad[3];
+	union {
+		__u8 long_mode;
+		__u8 vector;
+		struct {
+			__u64 gfn;
+		} shared_info;
+		__u64 pad[4];
+	} u;
+  };
+
+type values:
+
+KVM_XEN_ATTR_TYPE_LONG_MODE
+  Sets the ABI mode of the VM to 32-bit or 64-bit (long mode). This
+  determines the layout of the shared info pages exposed to the VM.
+
+KVM_XEN_ATTR_TYPE_SHARED_INFO
+  Sets the guest physical frame number at which the Xen "shared info"
+  page resides. Note that although Xen places vcpu_info for the first
+  32 vCPUs in the shared_info page, KVM does not automatically do so
+  and instead requires that KVM_XEN_VCPU_ATTR_TYPE_VCPU_INFO be used
+  explicitly even when the vcpu_info for a given vCPU resides at the
+  "default" location in the shared_info page. This is because KVM is
+  not aware of the Xen CPU id which is used as the index into the
+  vcpu_info[] array, so cannot know the correct default location.
+
+KVM_XEN_ATTR_TYPE_UPCALL_VECTOR
+  Sets the exception vector used to deliver Xen event channel upcalls.
+
+4.128 KVM_XEN_HVM_GET_ATTR
+--------------------------
+
+:Capability: KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_SHARED_INFO
+:Architectures: x86
+:Type: vm ioctl
+:Parameters: struct kvm_xen_hvm_attr
+:Returns: 0 on success, < 0 on error
+
+Allows Xen VM attributes to be read. For the structure and types,
+see KVM_XEN_HVM_SET_ATTR above.
+
+4.129 KVM_XEN_VCPU_SET_ATTR
+---------------------------
+
+:Capability: KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_SHARED_INFO
+:Architectures: x86
+:Type: vcpu ioctl
+:Parameters: struct kvm_xen_vcpu_attr
+:Returns: 0 on success, < 0 on error
+
+::
+
+  struct kvm_xen_vcpu_attr {
+	__u16 type;
+	__u16 pad[3];
+	union {
+		__u64 gpa;
+		__u64 pad[4];
+	} u;
+  };
+
+type values:
+
+KVM_XEN_VCPU_ATTR_TYPE_VCPU_INFO
+  Sets the guest physical address of the vcpu_info for a given vCPU.
+
+KVM_XEN_VCPU_ATTR_TYPE_VCPU_TIME_INFO
+  Sets the guest physical address of an additional pvclock structure
+  for a given vCPU. This is typically used for guest vsyscall support.
+
+4.130 KVM_XEN_VCPU_GET_ATTR
+---------------------------
+
+:Capability: KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_SHARED_INFO
+:Architectures: x86
+:Type: vcpu ioctl
+:Parameters: struct kvm_xen_vcpu_attr
+:Returns: 0 on success, < 0 on error
+
+Allows Xen vCPU attributes to be read. For the structure and types,
+see KVM_XEN_VCPU_SET_ATTR above.
 
 5. The kvm_run structure
 ========================
@@ -4893,9 +4998,11 @@ local APIC is not used.
 	__u16 flags;
 
 More architecture-specific flags detailing state of the VCPU that may
-affect the device's behavior.  The only currently defined flag is
-KVM_RUN_X86_SMM, which is valid on x86 machines and is set if the
-VCPU is in system management mode.
+affect the device's behavior. Current defined flags:
+  /* x86, set if the VCPU is in system management mode */
+  #define KVM_RUN_X86_SMM     (1 << 0)
+  /* x86, set if bus lock detected in VM */
+  #define KVM_RUN_BUS_LOCK    (1 << 1)
 
 ::
 
@@ -4996,13 +5103,18 @@ to the byte array.
 
 .. note::
 
-      For KVM_EXIT_IO, KVM_EXIT_MMIO, KVM_EXIT_OSI, KVM_EXIT_PAPR,
+      For KVM_EXIT_IO, KVM_EXIT_MMIO, KVM_EXIT_OSI, KVM_EXIT_PAPR, KVM_EXIT_XEN,
       KVM_EXIT_EPR, KVM_EXIT_X86_RDMSR and KVM_EXIT_X86_WRMSR the corresponding
       operations are complete (and guest state is consistent) only after userspace
       has re-entered the kernel with KVM_RUN.  The kernel side will first finish
-      incomplete operations and then check for pending signals.  Userspace
-      can re-enter the guest with an unmasked signal pending to complete
-      pending operations.
+      incomplete operations and then check for pending signals.
+
+      The pending state of the operation is not preserved in state which is
+      visible to userspace, thus userspace should ensure that the operation is
+      completed before performing a live migration.  Userspace can re-enter the
+      guest with an unmasked signal pending or with the immediate_exit field set
+      to complete pending operations without allowing any further instructions
+      to be executed.
 
 ::
 
@@ -5327,6 +5439,34 @@ wants to write. Once finished processing the event, user space must continue
 vCPU execution. If the MSR write was unsuccessful, user space also sets the
 "error" field to "1".
 
+::
+
+
+		struct kvm_xen_exit {
+  #define KVM_EXIT_XEN_HCALL          1
+			__u32 type;
+			union {
+				struct {
+					__u32 longmode;
+					__u32 cpl;
+					__u64 input;
+					__u64 result;
+					__u64 params[6];
+				} hcall;
+			} u;
+		};
+		/* KVM_EXIT_XEN */
+                struct kvm_hyperv_exit xen;
+
+Indicates that the VCPU exits into userspace to process some tasks
+related to Xen emulation.
+
+Valid values for 'type' are:
+
+  - KVM_EXIT_XEN_HCALL -- synchronously notify user-space about Xen hypercall.
+    Userspace is expected to place the hypercall result into the appropriate
+    field before invoking KVM_RUN again.
+
 ::
 
 		/* Fix the size of the union. */
@@ -6038,6 +6178,53 @@ KVM_EXIT_X86_RDMSR and KVM_EXIT_X86_WRMSR exit notifications which user space
 can then handle to implement model specific MSR handling and/or user notifications
 to inform a user that an MSR was not handled.
 
+7.22 KVM_CAP_X86_BUS_LOCK_EXIT
+-------------------------------
+
+:Architectures: x86
+:Target: VM
+:Parameters: args[0] defines the policy used when bus locks detected in guest
+:Returns: 0 on success, -EINVAL when args[0] contains invalid bits
+
+Valid bits in args[0] are::
+
+  #define KVM_BUS_LOCK_DETECTION_OFF      (1 << 0)
+  #define KVM_BUS_LOCK_DETECTION_EXIT     (1 << 1)
+
+Enabling this capability on a VM provides userspace with a way to select
+a policy to handle the bus locks detected in guest. Userspace can obtain
+the supported modes from the result of KVM_CHECK_EXTENSION and define it
+through the KVM_ENABLE_CAP.
+
+KVM_BUS_LOCK_DETECTION_OFF and KVM_BUS_LOCK_DETECTION_EXIT are supported
+currently and mutually exclusive with each other. More bits can be added in
+the future.
+
+With KVM_BUS_LOCK_DETECTION_OFF set, bus locks in guest will not cause vm exits
+so that no additional actions are needed. This is the default mode.
+
+With KVM_BUS_LOCK_DETECTION_EXIT set, vm exits happen when bus lock detected
+in VM. KVM just exits to userspace when handling them. Userspace can enforce
+its own throttling or other policy based mitigations.
+
+This capability is aimed to address the thread that VM can exploit bus locks to
+degree the performance of the whole system. Once the userspace enable this
+capability and select the KVM_BUS_LOCK_DETECTION_EXIT mode, KVM will set the
+KVM_RUN_BUS_LOCK flag in vcpu-run->flags field and exit to userspace. Concerning
+the bus lock vm exit can be preempted by a higher priority VM exit, the exit
+notifications to userspace can be KVM_EXIT_BUS_LOCK or other reasons.
+KVM_RUN_BUS_LOCK flag is used to distinguish between them.
+
+7.22 KVM_CAP_PPC_DAWR1
+----------------------
+
+:Architectures: ppc
+:Parameters: none
+:Returns: 0 on success, -EINVAL when CPU doesn't support 2nd DAWR
+
+This capability can be used to check / enable 2nd DAWR feature provided
+by POWER10 processor.
+
 8. Other capabilities.
 ======================
 
@@ -6415,7 +6602,6 @@ guest according to the bits in the KVM_CPUID_FEATURES CPUID leaf
 (0x40000001). Otherwise, a guest may use the paravirtual features
 regardless of what has actually been exposed through the CPUID leaf.
 
-
 8.29 KVM_CAP_DIRTY_LOG_RING
 ---------------------------
 
@@ -6502,3 +6688,29 @@ KVM_GET_DIRTY_LOG and KVM_CLEAR_DIRTY_LOG.  After enabling
 KVM_CAP_DIRTY_LOG_RING with an acceptable dirty ring size, the virtual
 machine will switch to ring-buffer dirty page tracking and further
 KVM_GET_DIRTY_LOG or KVM_CLEAR_DIRTY_LOG ioctls will fail.
+
+8.30 KVM_CAP_XEN_HVM
+--------------------
+
+:Architectures: x86
+
+This capability indicates the features that Xen supports for hosting Xen
+PVHVM guests. Valid flags are::
+
+  #define KVM_XEN_HVM_CONFIG_HYPERCALL_MSR	(1 << 0)
+  #define KVM_XEN_HVM_CONFIG_INTERCEPT_HCALL	(1 << 1)
+  #define KVM_XEN_HVM_CONFIG_SHARED_INFO	(1 << 2)
+
+The KVM_XEN_HVM_CONFIG_HYPERCALL_MSR flag indicates that the KVM_XEN_HVM_CONFIG
+ioctl is available, for the guest to set its hypercall page.
+
+If KVM_XEN_HVM_CONFIG_INTERCEPT_HCALL is also set, the same flag may also be
+provided in the flags to KVM_XEN_HVM_CONFIG, without providing hypercall page
+contents, to request that KVM generate hypercall page content automatically
+and also enable interception of guest hypercalls with KVM_EXIT_XEN.
+
+The KVM_XEN_HVM_CONFIG_SHARED_INFO flag indicates the availability of the
+KVM_XEN_HVM_SET_ATTR, KVM_XEN_HVM_GET_ATTR, KVM_XEN_VCPU_SET_ATTR and
+KVM_XEN_VCPU_GET_ATTR ioctls, as well as the delivery of exception vectors
+for event channel upcalls when the evtchn_upcall_pending field of a vcpu's
+vcpu_info is set.

Documentation/virt/kvm/locking.rst

@@ -16,7 +16,14 @@ The acquisition orders for mutexes are as follows:
 - kvm->slots_lock is taken outside kvm->irq_lock, though acquiring
   them together is quite rare.
 
-On x86, vcpu->mutex is taken outside kvm->arch.hyperv.hv_lock.
+On x86:
+
+- vcpu->mutex is taken outside kvm->arch.hyperv.hv_lock
+
+- kvm->arch.mmu_lock is an rwlock.  kvm->arch.tdp_mmu_pages_lock is
+  taken inside kvm->arch.mmu_lock, and cannot be taken without already
+  holding kvm->arch.mmu_lock (typically with ``read_lock``, otherwise
+  there's no need to take kvm->arch.tdp_mmu_pages_lock at all).
 
 Everything else is a leaf: no other lock is taken inside the critical
 sections.