From b4589810082a6e138f61f359757cb6a6790bc09c Mon Sep 17 00:00:00 2001 From: "Russell King (Oracle)" Date: Sat, 12 Apr 2025 15:09:49 +0100 Subject: [PATCH 1/4] net: stmmac: qcom-ethqos: set serdes speed using serdes_speed ethqos->serdes_speed represents the current speed the serdes was configured for, which should be the same as ethqos->speed. Since we wish to remove ethqos->speed to simplify the code, switch to using the serdes_speed instead. Signed-off-by: Russell King (Oracle) Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/E1u3bYL-000EcE-5c@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c index 0e4da216f942..5d8cd4336a8c 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c @@ -709,7 +709,7 @@ static int qcom_ethqos_serdes_powerup(struct net_device *ndev, void *priv) if (ret) return ret; - return phy_set_speed(ethqos->serdes_phy, ethqos->speed); + return phy_set_speed(ethqos->serdes_phy, ethqos->serdes_speed); } static void qcom_ethqos_serdes_powerdown(struct net_device *ndev, void *priv) From a3d54648ada2088c34a429ad16a39fb6c4a983f3 Mon Sep 17 00:00:00 2001 From: "Russell King (Oracle)" Date: Sat, 12 Apr 2025 15:09:54 +0100 Subject: [PATCH 2/4] net: stmmac: qcom-ethqos: remove ethqos->speed Rather than ethqos_fix_mac_speed() storing the speed in struct qcom_ethqos and then functions that are only called from here reading that speed, pass the speed to the called functions instead. This removes all readers of this struct member, which then allows the removal of the two places that set its value and the struct member. Signed-off-by: Russell King (Oracle) Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/E1u3bYQ-000EcK-9K@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski --- .../stmicro/stmmac/dwmac-qcom-ethqos.c | 31 +++++++++---------- 1 file changed, 14 insertions(+), 17 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c index 5d8cd4336a8c..cd25aea3e48f 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c @@ -106,12 +106,11 @@ struct qcom_ethqos { struct platform_device *pdev; void __iomem *rgmii_base; void __iomem *mac_base; - int (*configure_func)(struct qcom_ethqos *ethqos); + int (*configure_func)(struct qcom_ethqos *ethqos, int speed); unsigned int link_clk_rate; struct clk *link_clk; struct phy *serdes_phy; - int speed; int serdes_speed; phy_interface_t phy_mode; @@ -385,7 +384,7 @@ static int ethqos_dll_configure(struct qcom_ethqos *ethqos) return 0; } -static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos) +static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed) { struct device *dev = ðqos->pdev->dev; int phase_shift; @@ -412,7 +411,7 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos) rgmii_updatel(ethqos, RGMII_CONFIG_INTF_SEL, 0, RGMII_IO_MACRO_CONFIG); - switch (ethqos->speed) { + switch (speed) { case SPEED_1000: rgmii_updatel(ethqos, RGMII_CONFIG_DDR_MODE, RGMII_CONFIG_DDR_MODE, RGMII_IO_MACRO_CONFIG); @@ -532,14 +531,14 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos) loopback, RGMII_IO_MACRO_CONFIG); break; default: - dev_err(dev, "Invalid speed %d\n", ethqos->speed); + dev_err(dev, "Invalid speed %d\n", speed); return -EINVAL; } return 0; } -static int ethqos_configure_rgmii(struct qcom_ethqos *ethqos) +static int ethqos_configure_rgmii(struct qcom_ethqos *ethqos, int speed) { struct device *dev = ðqos->pdev->dev; volatile unsigned int dll_lock; @@ -562,7 +561,7 @@ static int ethqos_configure_rgmii(struct qcom_ethqos *ethqos) SDCC_DLL_CONFIG_PDN, SDCC_HC_REG_DLL_CONFIG); if (ethqos->has_emac_ge_3) { - if (ethqos->speed == SPEED_1000) { + if (speed == SPEED_1000) { rgmii_writel(ethqos, 0x1800000, SDCC_TEST_CTL); rgmii_writel(ethqos, 0x2C010800, SDCC_USR_CTL); rgmii_writel(ethqos, 0xA001, SDCC_HC_REG_DLL_CONFIG2); @@ -580,7 +579,7 @@ static int ethqos_configure_rgmii(struct qcom_ethqos *ethqos) rgmii_updatel(ethqos, SDCC_DLL_CONFIG_PDN, 0, SDCC_HC_REG_DLL_CONFIG); - if (ethqos->speed != SPEED_100 && ethqos->speed != SPEED_10) { + if (speed != SPEED_100 && speed != SPEED_10) { /* Set DLL_EN */ rgmii_updatel(ethqos, SDCC_DLL_CONFIG_DLL_EN, SDCC_DLL_CONFIG_DLL_EN, SDCC_HC_REG_DLL_CONFIG); @@ -607,10 +606,10 @@ static int ethqos_configure_rgmii(struct qcom_ethqos *ethqos) dev_err(dev, "Timeout while waiting for DLL lock\n"); } - if (ethqos->speed == SPEED_1000) + if (speed == SPEED_1000) ethqos_dll_configure(ethqos); - ethqos_rgmii_macro_init(ethqos); + ethqos_rgmii_macro_init(ethqos, speed); return 0; } @@ -626,7 +625,7 @@ static void ethqos_set_serdes_speed(struct qcom_ethqos *ethqos, int speed) /* On interface toggle MAC registers gets reset. * Configure MAC block for SGMII on ethernet phy link up */ -static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos) +static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos, int speed) { struct net_device *dev = platform_get_drvdata(ethqos->pdev); struct stmmac_priv *priv = netdev_priv(dev); @@ -634,7 +633,7 @@ static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos) val = readl(ethqos->mac_base + MAC_CTRL_REG); - switch (ethqos->speed) { + switch (speed) { case SPEED_2500: val &= ~ETHQOS_MAC_CTRL_PORT_SEL; rgmii_updatel(ethqos, RGMII_CONFIG2_RGMII_CLK_SEL_CFG, @@ -681,9 +680,9 @@ static void qcom_ethqos_speed_mode_2500(struct net_device *ndev, void *data) priv->plat->phy_interface = PHY_INTERFACE_MODE_2500BASEX; } -static int ethqos_configure(struct qcom_ethqos *ethqos) +static int ethqos_configure(struct qcom_ethqos *ethqos, int speed) { - return ethqos->configure_func(ethqos); + return ethqos->configure_func(ethqos, speed); } static void ethqos_fix_mac_speed(void *priv, int speed, unsigned int mode) @@ -691,9 +690,8 @@ static void ethqos_fix_mac_speed(void *priv, int speed, unsigned int mode) struct qcom_ethqos *ethqos = priv; qcom_ethqos_set_sgmii_loopback(ethqos, false); - ethqos->speed = speed; ethqos_update_link_clk(ethqos, speed); - ethqos_configure(ethqos); + ethqos_configure(ethqos, speed); } static int qcom_ethqos_serdes_powerup(struct net_device *ndev, void *priv) @@ -847,7 +845,6 @@ static int qcom_ethqos_probe(struct platform_device *pdev) return dev_err_probe(dev, PTR_ERR(ethqos->serdes_phy), "Failed to get serdes phy\n"); - ethqos->speed = SPEED_1000; ethqos->serdes_speed = SPEED_1000; ethqos_update_link_clk(ethqos, SPEED_1000); ethqos_set_func_clk_en(ethqos); From 4c30093f784e6b098da34165408b00c1810ef9ab Mon Sep 17 00:00:00 2001 From: "Russell King (Oracle)" Date: Sat, 12 Apr 2025 15:09:59 +0100 Subject: [PATCH 3/4] net: stmmac: qcom-ethqos: remove unnecessary setting max_speed Phylink will already limit the MAC speed according to the interface, so if 2500BASE-X is selected, the maximum speed will be 2.5G. It is, therefore, not necessary to set a speed limit. Remove setting plat_dat->max_speed from this glue driver. Signed-off-by: Russell King (Oracle) Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/E1u3bYV-000EcQ-Cv@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c index cd25aea3e48f..e8d4925be21c 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c @@ -676,7 +676,6 @@ static void qcom_ethqos_speed_mode_2500(struct net_device *ndev, void *data) { struct stmmac_priv *priv = netdev_priv(ndev); - priv->plat->max_speed = 2500; priv->plat->phy_interface = PHY_INTERFACE_MODE_2500BASEX; } From 0d1c18a10dd16d256100005f22e875cd741a35fb Mon Sep 17 00:00:00 2001 From: "Russell King (Oracle)" Date: Sat, 12 Apr 2025 15:10:04 +0100 Subject: [PATCH 4/4] net: stmmac: qcom-ethqos: remove speed_mode_2500() method qcom-ethqos doesn't need to implement the speed_mode_2500() method as it is only setting priv->plat->phy_interface to 2500BASE-X, which is already a pre-condition for assigning speed_mode_2500 in qcom_ethqos_probe(). So, qcom_ethqos_speed_mode_2500() has no effect. Remove it. Signed-off-by: Russell King (Oracle) Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/E1u3bYa-000EcW-H1@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c index e8d4925be21c..e30bdf72331a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c @@ -672,13 +672,6 @@ static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos, int speed) return val; } -static void qcom_ethqos_speed_mode_2500(struct net_device *ndev, void *data) -{ - struct stmmac_priv *priv = netdev_priv(ndev); - - priv->plat->phy_interface = PHY_INTERFACE_MODE_2500BASEX; -} - static int ethqos_configure(struct qcom_ethqos *ethqos, int speed) { return ethqos->configure_func(ethqos, speed); @@ -800,8 +793,6 @@ static int qcom_ethqos_probe(struct platform_device *pdev) ethqos->configure_func = ethqos_configure_rgmii; break; case PHY_INTERFACE_MODE_2500BASEX: - plat_dat->speed_mode_2500 = qcom_ethqos_speed_mode_2500; - fallthrough; case PHY_INTERFACE_MODE_SGMII: ethqos->configure_func = ethqos_configure_sgmii; break;