diff --git a/man/busctl.xml b/man/busctl.xml index 251233bb9..cc1844b0a 100644 --- a/man/busctl.xml +++ b/man/busctl.xml @@ -288,7 +288,7 @@ url="http://wiki.wireshark.org/Development/LibpcapFileFormat">Libpcap File Format description. Make sure to redirect the output to STDOUT to a file. Tools like - wireshark1 + wireshark1 may be used to dissect and view the generated files. @@ -472,7 +472,7 @@ o "/org/freedesktop/systemd1/job/42684" systemd1, systemd-bus-proxyd8, machinectl1, - wireshark1 + wireshark1 diff --git a/man/crypttab.xml b/man/crypttab.xml index aeacc5797..3e249ad23 100644 --- a/man/crypttab.xml +++ b/man/crypttab.xml @@ -75,7 +75,7 @@ Setting up encrypted block devices using this file supports three encryption modes: LUKS, TrueCrypt and plain. See - cryptsetup8 + cryptsetup8 for more information about each mode. When no mode is specified in the options field and the block device contains a LUKS signature, it is opened as a LUKS device; otherwise, it is assumed to be in @@ -117,7 +117,7 @@ Specifies the cipher to use. See - cryptsetup8 + cryptsetup8 for possible values and the default value of this option. A cipher with unpredictable IV values, such as aes-cbc-essiv:sha256, is @@ -129,7 +129,7 @@ Specifies the hash to use for password hashing. See - cryptsetup8 + cryptsetup8 for possible values and the default value of this option. @@ -140,7 +140,7 @@ Use a detached (separated) metadata device or file where the LUKS header is stored. This option is only relevant for LUKS devices. See - cryptsetup8 + cryptsetup8 for possible values and the default value of this option. @@ -150,7 +150,7 @@ Specifies the number of bytes to skip at the start of the key file. See - cryptsetup8 + cryptsetup8 for possible values and the default value of this option. @@ -160,7 +160,7 @@ Specifies the maximum number of bytes to read from the key file. See - cryptsetup8 + cryptsetup8 for possible values and the default value of this option. This option is ignored in plain encryption mode, as the key file size is then given by the key size. @@ -174,7 +174,7 @@ given passphrase or key, but another would, the setup of the device will fail regardless. This option implies . See - cryptsetup8 + cryptsetup8 for possible values. The default is to try all key slots in sequential order. @@ -221,7 +221,7 @@ Specifies the key size in bits. See - cryptsetup8 + cryptsetup8 for possible values and the default value of this option. @@ -278,7 +278,7 @@ volume provided in the second field. Please note that there is no protection for the hidden volume if the outer volume is mounted instead. See - cryptsetup8 + cryptsetup8 for more information on this limitation. @@ -383,7 +383,7 @@ hidden /mnt/tc_hidden /dev/null tcrypt-hidden,tcrypt-keyfile=/etc/keyfil systemd1, systemd-cryptsetup@.service8, systemd-cryptsetup-generator8, - cryptsetup8, + cryptsetup8, mkswap8, mke2fs8 diff --git a/man/file-hierarchy.xml b/man/file-hierarchy.xml index e9c894f5c..364e13079 100644 --- a/man/file-hierarchy.xml +++ b/man/file-hierarchy.xml @@ -397,7 +397,7 @@ /dev/shm Place for POSIX shared memory segments, as created via - shm_open3. + shm_open3. This directory is flushed on boot, and is a tmpfs file system. Since all users have write access to this directory, special care should be taken diff --git a/man/kernel-command-line.xml b/man/kernel-command-line.xml index 3741cf9cc..919bd1374 100644 --- a/man/kernel-command-line.xml +++ b/man/kernel-command-line.xml @@ -336,7 +336,7 @@ Enables resume from hibernation using the specified device. All - fstab5-like + fstab5-like paths are supported. For details, see systemd-hibernate-resume-generator8. diff --git a/man/locale.conf.xml b/man/locale.conf.xml index 48c0006db..2c32d1609 100644 --- a/man/locale.conf.xml +++ b/man/locale.conf.xml @@ -91,7 +91,7 @@ might be checked for locale configuration as well, however only as fallback. - localectl1 + localectl1 may be used to alter the settings in this file during runtime from the command line. Use systemd-firstboot1 @@ -121,7 +121,7 @@ Note that LC_ALL may not be configured in this file. For details about the meaning and semantics of these settings, refer to - locale7. + locale7. @@ -142,8 +142,8 @@ LC_MESSAGES=en_US.UTF-8 See Also systemd1, - locale7, - localectl1, + locale7, + localectl1, systemd-localed.service8, systemd-firstboot1 diff --git a/man/localectl.xml b/man/localectl.xml index aae6e0629..7def047f6 100644 --- a/man/localectl.xml +++ b/man/localectl.xml @@ -124,7 +124,7 @@ Set the system locale. This takes one or more assignments such as "LANG=de_DE.utf8", "LC_MESSAGES=en_GB.utf8", and so on. See - locale7 + locale7 for details on the available settings and their meanings. Use list-locales for a list of available locales (see below). @@ -204,10 +204,10 @@ See Also systemd1, - locale7, - locale.conf5, + locale7, + locale.conf5, vconsole.conf5, - loadkeys1, + loadkeys1, kbd4, The XKB Configuration Guide diff --git a/man/logind.conf.xml b/man/logind.conf.xml index 6cfdee83a..2b7954727 100644 --- a/man/logind.conf.xml +++ b/man/logind.conf.xml @@ -126,7 +126,7 @@ Note that setting KillUserProcesses=1 will break tools like - screen1. + screen1. diff --git a/man/machine-id.xml b/man/machine-id.xml index 83e0b26ce..92d67a386 100644 --- a/man/machine-id.xml +++ b/man/machine-id.xml @@ -75,7 +75,7 @@ globally unique ID in the network, which does not change even if the local network configuration changes. Due to this and its greater length, it is a more useful replacement for the - gethostid3 + gethostid3 call that POSIX specifies. The @@ -127,7 +127,7 @@ id[8] = (id[8] & 0x3F) | 0x80; systemd1, systemd-machine-id-setup1, - gethostid3, + gethostid3, hostname5, machine-info5, os-release5, diff --git a/man/modules-load.d.xml b/man/modules-load.d.xml index 34a937db6..4b722aa12 100644 --- a/man/modules-load.d.xml +++ b/man/modules-load.d.xml @@ -94,7 +94,7 @@ virtio-net systemd1, systemd-modules-load.service8, systemd-delta1, - modprobe8 + modprobe8 diff --git a/man/os-release.xml b/man/os-release.xml index 1b71a49d0..8f4ab10fe 100644 --- a/man/os-release.xml +++ b/man/os-release.xml @@ -316,7 +316,7 @@ BUG_REPORT_URL="https://bugzilla.redhat.com/" See Also systemd1, - lsb_release1, + lsb_release1, hostname5, machine-id5, machine-info5 diff --git a/man/sd_bus_message_append.xml b/man/sd_bus_message_append.xml index 0c49a0c7c..11fa07c63 100644 --- a/man/sd_bus_message_append.xml +++ b/man/sd_bus_message_append.xml @@ -245,7 +245,7 @@ sd_bus_message_append(m, "ynqiuxtd", y, n, q, i, u, x, t, d); sd_bus_new3, sd_bus_ref3, sd_bus_unref3, - ssh1, + ssh1, systemd-machined.service8, machinectl1 diff --git a/man/sd_bus_open_user.xml b/man/sd_bus_open_user.xml index e7a765962..2bbb01069 100644 --- a/man/sd_bus_open_user.xml +++ b/man/sd_bus_open_user.xml @@ -208,7 +208,7 @@ along with systemd; If not, see . sd_bus_new3, sd_bus_ref3, sd_bus_unref3, - ssh1, + ssh1, systemd-machined.service8, machinectl1 diff --git a/man/sd_event_add_signal.xml b/man/sd_event_add_signal.xml index 0299aa5a5..7c8df7df8 100644 --- a/man/sd_event_add_signal.xml +++ b/man/sd_event_add_signal.xml @@ -86,7 +86,7 @@ along with systemd; If not, see . the source parameter. The signal parameter specifies the signal to be handled (see - signal7). + signal7). The handler must reference a function to call when the signal is delivered or be NULL. The handler function will be passed the @@ -94,7 +94,7 @@ along with systemd; If not, see . freely by the caller. The handler also receives a pointer to a const struct signalfd_siginfo containing the information about the received signal. See - signalfd2 + signalfd2 for further information. Only a single handler may be installed for a specific diff --git a/man/sd_journal_get_catalog.xml b/man/sd_journal_get_catalog.xml index 1dcbadd18..c19eb11b2 100644 --- a/man/sd_journal_get_catalog.xml +++ b/man/sd_journal_get_catalog.xml @@ -130,7 +130,7 @@ sd_journal_open3, sd_journal_next3, sd_journal_get_data3, - malloc3 + malloc3 diff --git a/man/sd_journal_get_cursor.xml b/man/sd_journal_get_cursor.xml index 2b7f443f2..a400d8b1b 100644 --- a/man/sd_journal_get_cursor.xml +++ b/man/sd_journal_get_cursor.xml @@ -84,7 +84,7 @@ time) available entry. The call takes two arguments: a journal context object and a pointer to a string pointer where the cursor string will be placed. The string is allocated via libc - malloc3 + malloc3 and should be freed after use with free3. diff --git a/man/sd_journal_print.xml b/man/sd_journal_print.xml index 068b10e7c..0cd0b45b9 100644 --- a/man/sd_journal_print.xml +++ b/man/sd_journal_print.xml @@ -119,7 +119,7 @@ sd_journal_print() but takes a variable argument list encapsulated in an object of type va_list (see - stdarg3 + stdarg3 for more information) instead of the format string. It is otherwise equivalent in behavior. @@ -145,7 +145,7 @@ sd_journal_send() but takes an array of struct iovec (as defined in uio.h, see - readv3 + readv3 for details) instead of the format string. Each structure should reference one field of the entry to submit. The second argument specifies the number of structures in the array. @@ -154,7 +154,7 @@ necessary. sd_journal_perror() is a similar to - perror3 + perror3 and writes a message to the journal that consists of the passed string, suffixed with ": " and a human readable representation of the current error code stored in @@ -219,7 +219,7 @@ sd_journal_send("MESSAGE=Hello World, this is PID %lu!", (unsigned long) getpid( Async signal safety sd_journal_sendv() is "async signal safe" in the meaning of - signal7. + signal7. sd_journal_print, @@ -249,11 +249,11 @@ sd_journal_send("MESSAGE=Hello World, this is PID %lu!", (unsigned long) getpid( sd-journal3, sd_journal_stream_fd3, syslog3, - perror3, + perror3, errno3, systemd.journal-fields7, - signal7, - socket7 + signal7, + socket7 diff --git a/man/sysctl.d.xml b/man/sysctl.d.xml index 5a35cfe2c..8a131791a 100644 --- a/man/sysctl.d.xml +++ b/man/sysctl.d.xml @@ -57,7 +57,7 @@ At boot, systemd-sysctl.service8 reads configuration files from the above directories to configure - sysctl8 + sysctl8 kernel parameters. @@ -162,9 +162,9 @@ net.bridge.bridge-nf-call-arptables = 0 systemd1, systemd-sysctl.service8, systemd-delta1, - sysctl8, - sysctl.conf5, - modprobe8 + sysctl8, + sysctl.conf5, + modprobe8 diff --git a/man/systemctl.xml b/man/systemctl.xml index 338c1d328..b5e4cdf86 100644 --- a/man/systemctl.xml +++ b/man/systemctl.xml @@ -1703,9 +1703,9 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service $VISUAL are present or if it is set to an empty string or if their execution failed, systemctl will try to execute well known editors in this order: - nano1, - vim1, - vi1. + nano1, + vim1, + vi1. diff --git a/man/systemd-activate.xml b/man/systemd-activate.xml index e64894a28..cb68a79be 100644 --- a/man/systemd-activate.xml +++ b/man/systemd-activate.xml @@ -165,7 +165,7 @@ systemd1, systemd.socket5, systemd.service5, - cat1 + cat1 diff --git a/man/systemd-analyze.xml b/man/systemd-analyze.xml index 1ff81d3d5..198315052 100644 --- a/man/systemd-analyze.xml +++ b/man/systemd-analyze.xml @@ -145,7 +145,7 @@ systemd-analyze dot generates textual dependency graph description in dot format for further processing with the GraphViz - dot1 + dot1 tool. Use a command line like systemd-analyze dot | dot -Tsvg > systemd.svg to generate a graphical dependency tree. Unless or @@ -229,7 +229,7 @@ dot command (see above), this selects which relationships are shown in the dependency graph. Both options require a - glob7 + glob7 pattern as an argument, which will be matched against the left-hand and the right-hand, respectively, nodes of a relationship. diff --git a/man/systemd-cat.xml b/man/systemd-cat.xml index 38ddf66d2..9b1a8809d 100644 --- a/man/systemd-cat.xml +++ b/man/systemd-cat.xml @@ -171,7 +171,7 @@ systemd1, systemctl1, - logger1 + logger1 diff --git a/man/systemd-cryptsetup-generator.xml b/man/systemd-cryptsetup-generator.xml index 1974cd7a2..b6270358e 100644 --- a/man/systemd-cryptsetup-generator.xml +++ b/man/systemd-cryptsetup-generator.xml @@ -185,7 +185,7 @@ systemd1, crypttab5, systemd-cryptsetup@.service8, - cryptsetup8, + cryptsetup8, systemd-fstab-generator8 diff --git a/man/systemd-cryptsetup@.service.xml b/man/systemd-cryptsetup@.service.xml index bd03637de..ea524851e 100644 --- a/man/systemd-cryptsetup@.service.xml +++ b/man/systemd-cryptsetup@.service.xml @@ -78,7 +78,7 @@ systemd1, systemd-cryptsetup-generator8, crypttab5, - cryptsetup8 + cryptsetup8 diff --git a/man/systemd-efi-boot-generator.xml b/man/systemd-efi-boot-generator.xml index 91f881503..23464bcf1 100644 --- a/man/systemd-efi-boot-generator.xml +++ b/man/systemd-efi-boot-generator.xml @@ -62,7 +62,7 @@ does not communicate the used ESP to the OS, on systems where /boot is an explicitly configured mount (for example, listed in - fstab5) + fstab5) or where the /boot mount point is non-empty. Since this generator creates an automount unit, the mount will only be activated on-demand, when accessed. @@ -78,7 +78,7 @@ systemd.mount5, systemd.automount5, systemd-gpt-auto-generator8, - fstab5 + fstab5 diff --git a/man/systemd-firstboot.xml b/man/systemd-firstboot.xml index 67d38ba31..67289daa2 100644 --- a/man/systemd-firstboot.xml +++ b/man/systemd-firstboot.xml @@ -91,7 +91,7 @@ Note that this tool operates directly on the file system and does not involve any running system services, unlike - localectl1, + localectl1, timedatectl1 or hostnamectl1. @@ -125,7 +125,7 @@ LANG= and LC_MESSAGES settings. The argument should be a valid locale identifier, such as de_DE.UTF-8. This controls the - locale.conf5 + locale.conf5 configuration file. @@ -163,7 +163,7 @@ Sets the password of the system's root user. This creates a - shadow5 + shadow5 file. This setting exists in two forms: accepts the password to set directly on the command line, @@ -171,7 +171,7 @@ Note that it is not recommended specifying passwords on the command line as other users might be able to see them simply by invoking - ps1. + ps1. @@ -244,13 +244,13 @@ See Also systemd1, - locale.conf5, + locale.conf5, localtime5, hostname5, machine-id5, - shadow5, + shadow5, systemd-machine-id-setup1, - localectl1, + localectl1, timedatectl1, hostnamectl1 diff --git a/man/systemd-fstab-generator.xml b/man/systemd-fstab-generator.xml index 022efb413..bdc2dc1d0 100644 --- a/man/systemd-fstab-generator.xml +++ b/man/systemd-fstab-generator.xml @@ -54,7 +54,7 @@ systemd-fstab-generator is a generator that translates /etc/fstab (see - fstab5 + fstab5 for details) into native systemd units early at boot and when configuration of the system manager is reloaded. This will instantiate mount and swap units as necessary. @@ -173,7 +173,7 @@ See Also systemd1, - fstab5, + fstab5, systemd.mount5, systemd.swap5, systemd-cryptsetup-generator8 diff --git a/man/systemd-gpt-auto-generator.xml b/man/systemd-gpt-auto-generator.xml index 8d2eaca4f..bcc64ec9b 100644 --- a/man/systemd-gpt-auto-generator.xml +++ b/man/systemd-gpt-auto-generator.xml @@ -66,7 +66,7 @@ Partitions Specification. Note that this generator has no effect on non-GPT systems, on systems where the units are explicitly configured (for example, listed in - fstab5), + fstab5), or where the mount points are non-empty. This generator will only look for root partitions on the @@ -169,9 +169,9 @@ systemd-fstab-generator8, systemd-efi-boot-generator8, systemd-cryptsetup@.service8, - cryptsetup8, - fstab5, - btrfs8 + cryptsetup8, + fstab5, + btrfs8 diff --git a/man/systemd-hibernate-resume-generator.xml b/man/systemd-hibernate-resume-generator.xml index a21782cbf..d811b9b55 100644 --- a/man/systemd-hibernate-resume-generator.xml +++ b/man/systemd-hibernate-resume-generator.xml @@ -73,7 +73,7 @@ Takes a path to the resume device. Both persistent block device paths like /dev/disk/by-foo/bar and - fstab5-style + fstab5-style specifiers like FOO=bar are supported. diff --git a/man/systemd-journald.service.xml b/man/systemd-journald.service.xml index 6b250b65e..8280d6c87 100644 --- a/man/systemd-journald.service.xml +++ b/man/systemd-journald.service.xml @@ -241,7 +241,7 @@ systemd.journal-fields7, sd-journal3, systemd-coredump8, - setfacl1, + setfacl1, sd_journal_print4, pydoc systemd.journal. diff --git a/man/systemd-localed.service.xml b/man/systemd-localed.service.xml index 899916638..06aa78c0e 100644 --- a/man/systemd-localed.service.xml +++ b/man/systemd-localed.service.xml @@ -64,7 +64,7 @@ unused. The tool - localectl1 + localectl1 is a command line client to this service. See the See Also systemd1, - locale.conf5, + locale.conf5, vconsole.conf5, - localectl1, - loadkeys1 + localectl1, + loadkeys1 diff --git a/man/systemd-nspawn.xml b/man/systemd-nspawn.xml index b991b5dd1..7b6e673ba 100644 --- a/man/systemd-nspawn.xml +++ b/man/systemd-nspawn.xml @@ -626,7 +626,7 @@ Control the architecture ("personality") reported by - uname2 + uname2 in the container. Currently, only x86 and x86-64 are supported. This is useful when running a 32-bit container on a 64-bit host. If this setting @@ -763,7 +763,7 @@ pacman8, systemd.slice5, machinectl1, - btrfs8 + btrfs8 diff --git a/man/systemd-quotacheck.service.xml b/man/systemd-quotacheck.service.xml index 2179f11e9..9d4976274 100644 --- a/man/systemd-quotacheck.service.xml +++ b/man/systemd-quotacheck.service.xml @@ -86,7 +86,7 @@ See Also systemd1, - quotacheck8, + quotacheck8, systemd-fsck@.service8 diff --git a/man/systemd-remount-fs.service.xml b/man/systemd-remount-fs.service.xml index 7b88ac3f3..8e60e31b5 100644 --- a/man/systemd-remount-fs.service.xml +++ b/man/systemd-remount-fs.service.xml @@ -56,7 +56,7 @@ systemd-remount-fs.service is an early-boot service that applies mount options listed in - fstab5 + fstab5 to the root file system, the /usr file system and the kernel API file systems. This is required so that the mount options of these file systems -- which are pre-mounted by @@ -80,8 +80,8 @@ See Also systemd1, - fstab5, - mount8 + fstab5, + mount8 diff --git a/man/systemd-socket-proxyd.xml b/man/systemd-socket-proxyd.xml index 1c78b656e..0b852e6bc 100644 --- a/man/systemd-socket-proxyd.xml +++ b/man/systemd-socket-proxyd.xml @@ -72,7 +72,7 @@ to a configured server for each client, and then bidirectionally forwards data between the two. This utility's behavior is similar to - socat1. + socat1. The main differences for systemd-socket-proxyd are support for socket activation with Accept=false and an event-driven @@ -183,9 +183,9 @@ $ curl http://localhost:80/]]> systemd.socket5, systemd.service5, systemctl1, - socat1, - nginx1, - curl1 + socat1, + nginx1, + curl1 diff --git a/man/systemd-sysctl.service.xml b/man/systemd-sysctl.service.xml index f35a18a4d..d4c1a7ebe 100644 --- a/man/systemd-sysctl.service.xml +++ b/man/systemd-sysctl.service.xml @@ -56,11 +56,11 @@ systemd-sysctl.service is an early-boot service that configures - sysctl8 + sysctl8 kernel parameters. See - sysctl.d5 + sysctl.d5 for information about the configuration of this service. @@ -68,8 +68,8 @@ See Also systemd1, - sysctl.d5, - sysctl8, + sysctl.d5, + sysctl8, diff --git a/man/systemd-system.conf.xml b/man/systemd-system.conf.xml index c7bcfaee4..1b74ed38f 100644 --- a/man/systemd-system.conf.xml +++ b/man/systemd-system.conf.xml @@ -172,7 +172,7 @@ capabilities7 for details. Takes a whitespace-separated list of capability names as read by - cap_from_name3. + cap_from_name3. Capabilities listed will be included in the bounding set, all others are removed. If the list of capabilities is prefixed with ~, all but the listed capabilities will be included, the diff --git a/man/systemd-update-utmp.service.xml b/man/systemd-update-utmp.service.xml index b842d2972..c8a9cb7c9 100644 --- a/man/systemd-update-utmp.service.xml +++ b/man/systemd-update-utmp.service.xml @@ -69,7 +69,7 @@ systemd1, utmp5, - auditd8 + auditd8 diff --git a/man/systemd-vconsole-setup.service.xml b/man/systemd-vconsole-setup.service.xml index 59bb5e4e8..7c6ed0899 100644 --- a/man/systemd-vconsole-setup.service.xml +++ b/man/systemd-vconsole-setup.service.xml @@ -57,9 +57,9 @@ systemd-vconsole-setup.service is an early-boot service that configures the virtual console font and console keymap. Internally it calls - loadkeys1 + loadkeys1 and - setfont8. + setfont8. See vconsole.conf5 @@ -105,8 +105,8 @@ systemd1, vconsole.conf5, - loadkeys1, - setfont8, + loadkeys1, + setfont8, systemd-localed.service8 diff --git a/man/systemd.automount.xml b/man/systemd.automount.xml index 3db65d988..b5b5885cd 100644 --- a/man/systemd.automount.xml +++ b/man/systemd.automount.xml @@ -96,7 +96,7 @@ Automount units may either be configured via unit files, or via /etc/fstab (see - fstab5 + fstab5 for details). For details how systemd parses @@ -145,8 +145,8 @@ systemctl1, systemd.unit5, systemd.mount5, - mount8, - automount8, + mount8, + automount8, systemd.directives7 diff --git a/man/systemd.exec.xml b/man/systemd.exec.xml index fdb157864..56b53e601 100644 --- a/man/systemd.exec.xml +++ b/man/systemd.exec.xml @@ -663,7 +663,7 @@ capabilities7 for details. Takes a whitespace-separated list of capability names as read by - cap_from_name3, + cap_from_name3, e.g. CAP_SYS_ADMIN, CAP_DAC_OVERRIDE, CAP_SYS_PTRACE. Capabilities listed will @@ -711,7 +711,7 @@ set for the executed process. Take a capability string describing the effective, permitted and inherited capability sets as documented in - cap_from_text3. + cap_from_text3. Note that these capability sets are usually influenced (and filtered) by the capabilities attached to the executed file. Due to that CapabilityBoundingSet= is @@ -881,7 +881,7 @@ , which control whether mounts in the file system namespace set up for this unit's processes will receive or propagate mounts or unmounts. See - mount2 + mount2 for details. Defaults to . Use to ensure that mounts and unmounts are propagated from the host to the container and vice versa. Use @@ -929,7 +929,7 @@ authorize the transition. This directive is ignored if SELinux is disabled. If prefixed by -, all errors will be ignored. See - setexeccon3 + setexeccon3 for details. @@ -1076,7 +1076,7 @@ prefixed with ~ the listed address families will be applied as blacklist, otherwise as whitelist. Note that this restricts access to the - socket2 + socket2 system call only. Sockets passed into the process by other means (for example, by using socket activation with socket units, see @@ -1104,7 +1104,7 @@ Personality= Controls which kernel architecture - uname2 + uname2 shall report, when invoked by unit processes. Takes one of x86 and x86-64. This is useful when running 32-bit services on a 64-bit host @@ -1166,7 +1166,7 @@ $LANG Locale. Can be set in - locale.conf5 + locale.conf5 or on the kernel command line (see systemd1 and @@ -1184,7 +1184,7 @@ login shell. The variables are set for the units that have User= set, which includes user systemd instances. See - passwd5. + passwd5. diff --git a/man/systemd.generator.xml b/man/systemd.generator.xml index ccb698752..9b39e732e 100644 --- a/man/systemd.generator.xml +++ b/man/systemd.generator.xml @@ -333,7 +333,7 @@ find $dir systemd-debug-generator8, systemd-efi-boot-generator8, systemd-fstab-generator8, - fstab5, + fstab5, systemd-getty-generator8, systemd-gpt-auto-generator8, systemd-hibernate-resume-generator8, diff --git a/man/systemd.journal-fields.xml b/man/systemd.journal-fields.xml index 1fd46de31..7d6c5c715 100644 --- a/man/systemd.journal-fields.xml +++ b/man/systemd.journal-fields.xml @@ -134,7 +134,7 @@ derived from glibc's program_invocation_short_name variable, see - program_invocation_short_name3.) + program_invocation_short_name3.) diff --git a/man/systemd.kill.xml b/man/systemd.kill.xml index c974e2248..e57f0e724 100644 --- a/man/systemd.kill.xml +++ b/man/systemd.kill.xml @@ -135,7 +135,7 @@ of shutting down a unit (see above), and is usually followed by SIGKILL (see above and below). For a list of valid signals, see - signal7. + signal7. Defaults to SIGTERM. @@ -176,7 +176,7 @@ systemd.exec5, systemd.directives7, kill2, - signal7 + signal7 diff --git a/man/systemd.mount.xml b/man/systemd.mount.xml index 5cbde8b84..fcb9a4416 100644 --- a/man/systemd.mount.xml +++ b/man/systemd.mount.xml @@ -68,7 +68,7 @@ Additional options are listed in systemd.exec5, which define the execution environment the - mount8 + mount8 binary is executed in, and in systemd.kill5, which define the way the processes are terminated, and in @@ -78,7 +78,7 @@ particularly useful for mount units specifying a Type= option or using configuration not specified in /etc/fstab; - mount8 + mount8 will refuse options that are not listed in /etc/fstab if it is not run as UID 0. @@ -118,7 +118,7 @@ Mount units may either be configured via unit files, or via /etc/fstab (see - fstab5 + fstab5 for details). Mounts listed in /etc/fstab will be converted into native units dynamically at boot and when the configuration of the system manager is reloaded. In general, @@ -231,7 +231,7 @@ What= Takes an absolute path of a device node, file or other resource to mount. See - mount8 + mount8 for details. If this refers to a device node, a dependency on the respective device unit is automatically created. (See systemd.device5 @@ -251,7 +251,7 @@ Type= Takes a string for the file system type. See - mount8 + mount8 for details. This setting is optional. @@ -270,7 +270,7 @@ the options specified in Options= is relaxed, and unknown mount options are tolerated. This corresponds with - mount8's + mount8's -s switch. Defaults to off. @@ -321,7 +321,7 @@ systemd.service5, systemd.device5, proc5, - mount8, + mount8, systemd-fstab-generator8, systemd.directives7 diff --git a/man/systemd.network.xml b/man/systemd.network.xml index df9f6e792..ed0b2eb4a 100644 --- a/man/systemd.network.xml +++ b/man/systemd.network.xml @@ -297,7 +297,7 @@ separated by a / character. Specify this key more than once to configure several addresses. The format of the address must be as described in - inet_pton3. + inet_pton3. This is a short-hand for an [Address] section only containing an Address key (see below). This option may be specified more than once. @@ -323,7 +323,7 @@ The gateway address, which must be in the format described in - inet_pton3. + inet_pton3. This is a short-hand for a [Route] section only containing a Gateway key. This option may be specified more than once. @@ -334,7 +334,7 @@ A DNS server address, which must be in the format described in - inet_pton3. + inet_pton3. This option may be specified more than once. @@ -440,7 +440,7 @@ The broadcast address, which must be in the format described in - inet_pton3. + inet_pton3. This key only applies to IPv4 addresses. If it is not given, it is derived from the Address key. diff --git a/man/systemd.path.xml b/man/systemd.path.xml index 08a7ec897..d02bc92ae 100644 --- a/man/systemd.path.xml +++ b/man/systemd.path.xml @@ -74,7 +74,7 @@ (see below). Internally, path units use the - inotify7 + inotify7 API to monitor file systems. Due to that, it suffers by the same limitations as inotify, and for example cannot be used to monitor files or directories changed by other machines on remote NFS file @@ -187,7 +187,7 @@ systemctl1, systemd.unit5, systemd.service5, - inotify7, + inotify7, systemd.directives7 diff --git a/man/systemd.socket.xml b/man/systemd.socket.xml index 6808179e8..350a95648 100644 --- a/man/systemd.socket.xml +++ b/man/systemd.socket.xml @@ -265,7 +265,7 @@ Takes a one of , or . Controls the IPV6_V6ONLY socket option (see - ipv67 + ipv67 for details). If , IPv6 sockets bound will be accessible via both IPv4 and IPv6. If , they will be accessible via IPv6 @@ -294,7 +294,7 @@ this socket to. If set, traffic will only be accepted from the specified network interfaces. This controls the SO_BINDTODEVICE socket option (see - socket7 + socket7 for details). If this option is used, an automatic dependency from this socket unit on the network interface device unit (systemd.device5 @@ -385,7 +385,7 @@ /proc/sys/net/ipv4/tcp_keepalive_time) for all TCP streams accepted on this socket. This controls the SO_KEEPALIVE socket option (see - socket7 + socket7 and the TCP Keepalive HOWTO for details.) Defaults to @@ -397,7 +397,7 @@ Takes time (in seconds) as argument . The connection needs to remain idle before TCP starts sending keepalive probes. This controls the TCP_KEEPIDLE socket option (see - socket7 + socket7 and the TCP Keepalive HOWTO for details.) @@ -410,7 +410,7 @@ individual keepalive probes, if the socket option SO_KEEPALIVE has been set on this socket seconds as argument. This controls the TCP_KEEPINTVL socket option (see - socket7 + socket7 and the TCP Keepalive HOWTO for details.) Defaults value is 75 @@ -423,7 +423,7 @@ unacknowledged probes to send before considering the connection dead and notifying the application layer. This controls the TCP_KEEPCNT socket option (see - socket7 + socket7 and the TCP Keepalive HOWTO for details.) Defaults value is @@ -436,7 +436,7 @@ algorithm works by combining a number of small outgoing messages, and sending them all at once. This controls the TCP_NODELAY socket option (see - tcp7 + tcp7 Defaults to . @@ -445,7 +445,7 @@ Takes an integer argument controlling the priority for all traffic sent from this socket. This controls the SO_PRIORITY socket option (see - socket7 + socket7 for details.). @@ -458,7 +458,7 @@ established. When this option is set, the TCP_DEFER_ACCEPT socket option will be used (see - tcp7), + tcp7), and the kernel will ignore initial ACK packets without any data. The argument specifies the approximate amount of time the kernel should wait for incoming data before falling back @@ -485,7 +485,7 @@ Takes an integer argument controlling the receive or send buffer sizes of this socket, respectively. This controls the SO_RCVBUF and SO_SNDBUF socket options (see - socket7 + socket7 for details.). The usual suffixes K, M, G are supported and are understood to the base of 1024. @@ -495,7 +495,7 @@ Takes an integer argument controlling the IP Type-Of-Service field for packets generated from this socket. This controls the IP_TOS socket option (see - ip7 + ip7 for details.). Either a numeric string or one of , , or may @@ -508,9 +508,9 @@ Time-To-Live/IPv6 Hop-Count field for packets generated from this socket. This sets the IP_TTL/IPV6_UNICAST_HOPS socket options (see - ip7 + ip7 and - ipv67 + ipv67 for details.) @@ -520,7 +520,7 @@ mark of packets generated by this socket. This can be used in the firewall logic to filter packets from this socket. This sets the SO_MARK socket option. See - iptables8 + iptables8 for details. @@ -531,7 +531,7 @@ bind2s to this TCP or UDP port. This controls the SO_REUSEPORT socket option. See - socket7 + socket7 for details. @@ -583,7 +583,7 @@ control the mq_maxmsg field or the mq_msgsize field, respectively, when creating the message queue. Note that either none or both of these variables need to be set. See - mq_setattr3 + mq_setattr3 for details. diff --git a/man/systemd.swap.xml b/man/systemd.swap.xml index 23b9c712e..5016f453d 100644 --- a/man/systemd.swap.xml +++ b/man/systemd.swap.xml @@ -69,7 +69,7 @@ Additional options are listed in systemd.exec5, which define the execution environment the - swapon8 + swapon8 binary is executed in, and in systemd.kill5, which define the way the processes are terminated, and in @@ -100,7 +100,7 @@ Swap units may either be configured via unit files, or via /etc/fstab (see - fstab5 + fstab5 for details). Swaps listed in /etc/fstab will be converted into native units dynamically at boot and when the configuration of the system manager is reloaded. See @@ -161,7 +161,7 @@ What= Takes an absolute path of a device node or file to use for paging. See - swapon8 + swapon8 for details. If this refers to a device node, a dependency on the respective device unit is automatically created. (See systemd.device5 @@ -187,7 +187,7 @@ device. This may be used for controlling discard options among other functionality, if the swap backing device supports the discard or trim operation. (See - swapon8 + swapon8 for more information.) @@ -229,7 +229,7 @@ systemd.resource-control5, systemd.device5, systemd.mount5, - swapon8, + swapon8, systemd-fstab-generator8, systemd.directives7 diff --git a/man/systemd.unit.xml b/man/systemd.unit.xml index a452f87ba..c2e374a94 100644 --- a/man/systemd.unit.xml +++ b/man/systemd.unit.xml @@ -826,7 +826,7 @@ cris to test against a specific architecture. The architecture is determined from the information returned by - uname2 + uname2 and is thus subject to personality2. Note that a Personality= setting in the @@ -1438,7 +1438,7 @@ PrivateTmp=yes systemd-analyze1, capabilities7, systemd.directives7, - uname1 + uname1 diff --git a/man/systemd.xml b/man/systemd.xml index 9b92140e6..d006b0bb9 100644 --- a/man/systemd.xml +++ b/man/systemd.xml @@ -1012,9 +1012,9 @@ Set the system locale to use. This overrides the settings in /etc/locale.conf. For more information see - locale.conf5 + locale.conf5 and - locale7. + locale7. @@ -1077,7 +1077,7 @@ The systemd Homepage, systemd-system.conf5, - locale.conf5, + locale.conf5, systemctl1, journalctl1, systemd-notify1, diff --git a/man/vconsole.conf.xml b/man/vconsole.conf.xml index 17bea8b68..27196d44e 100644 --- a/man/vconsole.conf.xml +++ b/man/vconsole.conf.xml @@ -129,9 +129,9 @@ FONT=eurlatgr systemd1, systemd-vconsole-setup.service8, - loadkeys1, - setfont8, - locale.conf5, + loadkeys1, + setfont8, + locale.conf5, systemd-localed.service8