- Set bridge ipv4 address when bridge is present
- IPv6 changes for bridge
- Convert unit tests to the new model
Signed-off-by: Alessandro Boch <aboch@docker.com>
Currently when docker exits ungracefully it may leave
dangling sandboxes which may hold onto precious network
resources. Added checkpoint state for sandboxes which
on boot up will be used to clean up the sandboxes and
network resources.
On bootup the remaining dangling state in the checkpoint
are read and cleaned up before accepting any new
network allocation requests.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Always on watching of networks and endpoints can
affect scalability of the cluster beyond a few nodes.
Remove pro active watching and watch only the objects
you are interested in.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Exposing osl package outside libnetwork is not neccessary and the
InterfaceStatistics anyways belong to the types package.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Replaced it with DisableBridgeCreation and it can be used ONLY in
a special case for docker0 bridge from docker, instead of calling it
from all other case.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
1. Don't save localscope endpoints to localstore for now.
2. Add common function updateToStore/deleteFromStore to store KVObjects.
3. Merge `getNetworksFromGlobalStore` and `getNetworksFromLocalStore`
4. Add `n.isGlobalScoped` before `n.watchEndpoints` in `addNetwork`
5. Fix integration-tests
6. Fix test failure in drivers/remote/driver_test.go
7. Restore network to store if deleteNework failed
Currently the driver configuration is pushed through a separate
api. This makes driver configuration possible at any arbitrary
time. This unncessarily complicates the driver implementation.
More importantly the driver does not get access to it's
configuration before it can do the handshake with libnetwork.
This make the internal drivers a little bit different to
external plugins which can get their configuration before the handshake
with libnetwork.
This PR attempts to fix that mismatch between internal drivers and
external plugins.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Currently the endpoint data model consists of multiple
interfaces per-endpoint. This seems to be an overkill
since there is no real use case for it. Removing it
to remove unnecessary complexity from the code.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
This way we won't vendor test related functions in docker anymore.
It also moves netns related functions to a new ns package to be able to
call the ns init function in tests. I think this also helps with the
overall package isolation.
Signed-off-by: David Calavera <david.calavera@gmail.com>
- Convinience API which detaches the sandbox from
all endpoints, resets and reapply config options,
setup discovery files, reattach to the endpoints.
No change to the osl sandbox in use.
Signed-off-by: Alessandro Boch <aboch@docker.com>
Make sure to always explicitly set namespace for all
kernel bound network operations irrespective of whether
the operation is performed in init namespace or a user
defined namespace. This already happens for user defined
netns. But doesn't happen for initial netns that libnetwork
runs in.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
- Maps 1 to 1 with container's networking stack
- It holds container's specific nw options which
before were incorrectly owned by Endpoint.
- Sandbox creation no longer coupled with Endpoint Join,
sandbox and endpoint have now separate lifecycle.
- LeaveAll naturally replaced by Sandbox.Delete
- some pkg and file renaming in order to have clear
mapping between structure name and entity ("sandbox")
- Revisited hosts and resolv.conf handling
- Removed from JoinInfo interface capability of setting hosts and resolv.conf paths
- Changed etchosts.Build() to first write the search domains and then the nameservers
Signed-off-by: Alessandro Boch <aboch@docker.com>
for the bridge driver.
Moves two config options, namely EnableIPTables and EnableUserlandProxy
from networks to the driver.
Closes#242
Signed-off-by: Mohammad Banikazemi <MBanikazemi@gmail.com>
The controller sandboxes hashmap is not being protected by a lock
while deleting it in `LeaveAll` call. This may result in a race
whereby any other read access that happens with the lock held is
also vulnerable to return random sandbox data which could result
in totally unpredictable behavior.
Also as part of the fix check if `s.endpoints` is empty and log an
error in `rmEndpoint` so that we don't bring down the process
for this unexpected error.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
For the moment in 1.7.1 since we provide a resolv.conf set api
to the driver honor that so that for host driver we can use the
the host's /etc/resolv.conf file as is rather than putting the
contents through a filtering logic.
It should be noted that the driver side capability to set the
resolv.conf file is most likely going to go away in the future
but this should be fine for 1.7.1
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Currently container can join one endpoint when it is started.
More endpoints can be attached at a later point in time. But
when that happens this attachment should only have meaning
only as long as the container is alive. The attachment should
lose it's meaning when the container goes away. Cuurently there
is no way for the container management code to tell libnetwork
to detach the container from all attached endpoints. This PR
provides an additional API `LeaveAll` which adds this
functionality,
To facilitate this and make the sanbox lifecycle consistent
some slight changes have been made to the behavior of sandbox
management code. The sandbox is no longer destroyed when the
last endpoint is detached from the container. Instead the sandbox
ie kept alive and can only be destroyed with a `LeaveAll` call.
This gives better control of sandbox lifecycle by the container
management code and the sandbox doesn't get destroyed from under
the carpet while the container is still using it.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
The configuration format for docker runtime is based on daemon flags and
hence adjusting the libnetwork configuration to accomodate it by moving
the TOML based configuration to the dnet tool.
Also changed the controller configuration via options
Signed-off-by: Madhu Venugopal <madhu@docker.com>
- The libnetwork test code had some issues in not properly
passing the network options. Fixed it.
- Made controller a global value so that every test uses the
same controller instance.
- Cleaned up endpoint and network objects after every test.
- Extended the endpoint join test case to test the same container
join two different networks using two different endpoints.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Now that Endpoint interface has the Info method there is no
need to return container data as a return value in the Join
method. Removed the return value and fixed all the callers.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
- Also unexporting configuration structures in bridge
- Changes in dnet/network.go to set bridge name = network name
Signed-off-by: Alessandro Boch <aboch@docker.com>
Currently the driver api allows the driver to specify the
full interface name for the interface inside the container.
This is not appropriate since the driver does not have the full
view of the sandbox to correcly allocate an unambiguous interface
name. Instead with this PR the driver will be allowed to specify
a prefix for the name and libnetwork and sandbox layers will
disambiguate it with an appropriate suffix.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
In essense, this just involves marshalling structs back and forth to a
remote process, via the plugin client. There are a couple of types
that don't JSONify well, notably `net.IPNet`, so there is some
translation to be done.
To conform to the driverapi interface, we must give the list of
endpoint interfaces to the remote process, and let it puzzle out what
it's supposed to do; including the possibility of returning an error.
The constraints on EndpointInfo are enforced by the remote driver
implementation; namely:
* It can't be nil
* If it's got non-empty Interfaces(), the remote process can't put
more in
In the latter case, or if we fail to add an interface for some
(future) reason, we try to roll the endpoint creation back. Likewise
for join -- if we fail to set the fields of the JoinInfo, we roll the
join back by leaving.
Signed-off-by: Michael Bridgen <mikeb@squaremobius.net>
- Package types to define the interfaces libnetwork errors
may implement, so that caller can categorize them.
Signed-off-by: Alessandro Boch <aboch@docker.com>
This is need to decouple types from netutils which has linux
dependencies. This way the client code which needs network types
can just pull in types package which makes client code platform
agnostic.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
The container's /etc/resolv.conf permission was getting setup
as 0600 while it should be 0644 for every user inside the
container to be able to read it. The tempfile that we create
initially to populate the resolvconf content is getting created
with 0600 mode. Changed it to 0644 once it is created since there
is noway to pass mode option to ioutil.Tempfile
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
There is a panic when two containers joining a host
network leave one after another. The problem was that
in controller.go the sandboxData was not stored as a
pointer reference. So when we got the data from the map
it was the copy of the data and refcnt increment was done
on that. Changed it to hold a reference. Also added a test
case to test it.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Refactored the driver api so that is aligns well with the design
of endpoint lifecycle becoming decoupled from the container lifecycle.
Introduced go interfaces to obtain address information during CreateEndpoint.
Go interfaces are also used to get data from driver during join.
This sort of deisgn hides the libnetwork specific type details from drivers.
Another adjustment is to provide a list of interfaces during CreateEndpoint. The
goal of this is many-fold:
* To indicate to the driver that IP address has been assigned by some other
entity (like a user wanting to use their own static IP for an endpoint/container)
and asking the driver to honor this. Driver may reject this configuration
and return an error but it may not try to allocate an IP address and override
the passed one.
* To indicate to the driver that IP address has already been allocated once
for this endpoint by an instance of the same driver in some docker host
in the cluster and this is merely a notification about that endpoint and the
allocated resources.
* In case the list of interfaces is empty the driver is required to allocate and
assign IP addresses for this endpoint.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Alessandro Boch