Add a daemon flag to control this behaviour. Add a warning message when pulling
an image from a v1 registry. The default order of pull is slightly altered
with this changset.
Previously it was:
https v2, https v1, http v2, http v1
now it is:
https v2, http v2, https v1, http v1
Prevent login to v1 registries by explicitly setting the version before ping to
prevent fallback to v1.
Add unit tests for v2 only mode. Create a mock server that can register
handlers for various endpoints. Assert no v1 endpoints are hit with legacy
registries disabled for the following commands: pull, push, build, run and
login. Assert the opposite when legacy registries are not disabled.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Generate a hash chain involving the image configuration, layer digests,
and parent image hashes. Use the digests to compute IDs for each image
in a manifest, instead of using the remotely specified IDs.
To avoid breaking users' caches, check for images already in the graph
under old IDs, and avoid repulling an image if the version on disk under
the legacy ID ends up with the same digest that was computed from the
manifest for that image.
When a calculated ID already exists in the graph but can't be verified,
continue trying SHA256(digest) until a suitable ID is found.
"save" and "load" are not changed to use a similar scheme. "load" will
preserve the IDs present in the tar file.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Docker ps default format should not take precedence over cli flags.
This happens effectively for other flags except `-q`.
We need to let the cli to set the format as table to print the
expected output with `-q`.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Currently some notary tests change the system clock to check for expiration.
Skip these tests until the code can be refactored to not rely on updating the system clock.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
(cherry picked from commit bf3c1e6a3a)
The process of pulling an image spawns a new goroutine for each layer in the
image manifest. If any of these downloads fail we would stop everything and
return the error, even though other goroutines would still be running and
writing output through a progress reader which is attached to an http response
writer. Since the request handler had already returned from the first error,
the http server panics when one of these download goroutines makes a write to
the response writer buffer.
This patch prevents this crash in the daemon http server by waiting for all of
the download goroutines to complete, even if one of them fails. Only then does
it return, terminating the request handler.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
(cherry picked from commit d80c4244d3)
Integration tests were failing due to proc filter behavior
changes with new apparmor policies.
Also include the missing docker-unconfined policy resolving
potential startup errors. This policy is complain-only so
it should behave identically to the standard unconfined policy,
but will not apply system path-based policies within containers.
Signed-off-by: Eric Windisch <eric@windisch.us>
(cherry picked from commit 5832715052)
We noticed a regression since the 1.7.1 patch after some refactoring. This
patch corrects the behavior and adds integration tests for modified manifest
and rootfs layer blobs.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
(cherry picked from commit de52a3bcaa)
Update UX to use aliases for root, snapshot, and target key
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
(cherry picked from commit 6ce76cd9ed)
[pkg/archive] Update archive/copy path handling
- Remove unused TarOptions.Name field.
- Add new TarOptions.RebaseNames field.
- Update some of the logic around path dir/base splitting.
- Update some of the logic behind archive entry name rebasing.
[api/types] Add LinkTarget field to PathStat
[daemon] Fix stat, archive, extract of symlinks
These operations *should* resolve symlinks that are in the path but if the
resource itself is a symlink then it *should not* be resolved. This patch
puts this logic into a common function `resolvePath` which resolves symlinks
of the path's dir in scope of the container rootfs but does not resolve the
final element of the path. Now archive, extract, and stat operations will
return symlinks if the path is indeed a symlink.
[api/client] Update cp path hanling
[docs/reference/api] Update description of stat
Add the linkTarget field to the header of the archive endpoint.
Remove path field.
[integration-cli] Fix/Add cp symlink test cases
Copying a symlink should do just that: copy the symlink NOT
copy the target of the symlink. Also, the resulting file from
the copy should have the name of the symlink NOT the name of
the target file.
Copying to a symlink should copy to the symlink target and not
modify the symlink itself.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
(cherry picked from commit 75f6929b44)
Fix#14915. Add unit test for #14915.
Thanks @runcom for the test case: when the client calls 1.18 api
version w/o hostconfig it results in a nil pointer dereference.
Signed-off-by: Stephen Rust <srust@blockbridge.com>
(cherry picked from commit c358a4cd35)
The 'deny ptrace' statement was supposed to only ignore
ptrace failures in the AUDIT log. However, ptrace was implicitly
allowed from unconfined processes (such as the docker daemon and
its integration tests) due to the abstractions/base include.
This rule narrows the definition such that it will only ignore
the failures originating inside of the container and will not
cause denials when the daemon or its tests ptrace inside processes.
Introduces positive and negative tests for ptrace /w apparmor.
Signed-off-by: Eric Windisch <eric@windisch.us>
(cherry picked from commit f5c388b35a)
Builds where the base images have been resolved to trusted digest
references will now be tagged with the original tag reference from
the Dockerfile on a successful build.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
(cherry picked from commit bb2e6c72d2)
Return an error when the container is stopped only in api versions
equal or greater than 1.20 (docker 1.8).
Signed-off-by: David Calavera <david.calavera@gmail.com>
(cherry picked from commit 621e3d8587)
Will attempt to load profiles automatically. If loading fails
but the profiles are already loaded, execution will continue.
A hard failure will only occur if Docker cannot load
the profiles *and* they have not already been loaded via
some other means.
Also introduces documentation for AppArmor.
Signed-off-by: Eric Windisch <eric@windisch.us>
(cherry picked from commit 3edc88f76d)
Symbolic links in the context directory path are now evaluated.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
(cherry picked from commit 01d570ad30)
In 1.6.2 we were decoding inspect API response into interface{}.
time.Time fields were JSON encoded as RFC3339Nano in the response
and when decoded into interface{} they were just strings so the inspect
template treated them as just strings.
From 1.7 we are decoding into types.ContainerJSON and when the template
gets executed it now gets a time.Time and it's formatted as
2015-07-22 05:02:38.091530369 +0000 UTC.
This patch brings back the old behavior by typing time.Time fields
as string so they gets formatted as they were encoded in JSON -- RCF3339Nano
Signed-off-by: Antonio Murdaca <runcom@linux.com>
(cherry picked from commit c9207bc0aa)
Update help line to allow 90 characters instead of 80
The trust flag pushes out the help description column wider, requiring more room to display help messages.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Clean up tests to remove duplicate code
Add tests which run pull and create in an isolated configuration directory.
Add build test for untrusted tag
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Added notary server to docker base image.
Created trust suite which runs trust server for running trusted commands.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Add a trusted flag to force the cli to resolve a tag into a digest via the notary trust library and pull by digest.
On push the flag the trust flag will indicate the digest and size of a manifest should be signed and push to a notary server.
If a tag is given, the cli will resolve the tag into a digest and pull by digest.
After pulling, if a tag is given the cli makes a request to tag the image.
Use certificate directory for notary requests
Read certificates using same logic used by daemon for registry requests.
Catch JSON syntax errors from Notary client
When an uncaught error occurs in Notary it may show up in Docker as a JSON syntax error, causing a confusing error message to the user.
Provide a generic error when a JSON syntax error occurs.
Catch expiration errors and wrap in additional context.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
This patch creates a new cli package that allows to combine both client
and daemon commands (there is only one daemon command: docker daemon).
The `-d` and `--daemon` top-level flags are deprecated and a special
message is added to prompt the user to use `docker daemon`.
Providing top-level daemon-specific flags for client commands result
in an error message prompting the user to use `docker daemon`.
This patch does not break any old but correct usages.
This also makes `-d` and `--daemon` flags, as well as the `daemon`
command illegal in client-only binaries.
Signed-off-by: Tibor Vass <tibor@docker.com>
The header row was not being printed when "docker ps" was invoked without containers thanks to the new format support, and we instead received a single blank line.
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
pushV2Tag already deduplicates layers, but the scope of this
deduplication is only for a particular tag. If we are pushing all tags
in a repository, we may check layers several times. Fix this by moving
the layersSeen map from the pushV2Tag function to the v2Pusher struct.
In addition to avoiding some useless round-trips, this makes the "docker
push" output less confusing. It formerly could contain many repeated
lines like:
124e2127157f: Image already exists
124e2127157f: Image already exists
...
Add test coverage based on the "docker push" output: a hash should not
appear multiple times when pushing multiple tags.
Fixes#14873
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Jessica Frazelle