Update packages file for version 23980

Signed-off-by: clrbuilder <clrbuilder@intel.com>

Makefile.common

@@ -12,16 +12,15 @@ SHELL  = /bin/bash
 SPECFILE = $(addsuffix .spec, $(PKG_NAME))
 
 SRPMVERS = $(shell [ ! -f $(SPECFILE) ] || rpmspec -D '_vendor clr' --srpm -q --queryformat '%{NAME}-%{VERSION}-%{RELEASE}\n' $(SPECFILE))
-SRPMFILE = results/$(SRPMVERS).src.rpm
+SRPMFILE = results/srpm/$(SRPMVERS).src.rpm
 
-LATEST_RPMS = $(shell [ ! -s results/build.log ] || for r in `egrep 'Wrote.*/RPMS/.*.rpm' results/build.log |  sed 's/.*\///'` ; do echo "results/$$r"; done)
+LATEST_RPMS = $(shell [ ! -s results/logs/build.log ] || for r in `egrep 'Wrote.*/RPMS/.*.rpm' results/logs/build.log |  sed 's/.*\///;s/.*debuginfo/debuginfo\/&/'` ; do echo "results/$$r"; done)
 RPMS ?= $(LATEST_RPMS)
 
 WITH_SUDO = $(shell cmp /usr/bin/mock /usr/sbin/mock &> /dev/null && echo sudo )
 
 # MOCK_CONFIG_VAL is set in Makefile.shared
-MOCK ?= $(WITH_SUDO) /usr/bin/mock -r $(MOCK_CONFIG_VAL)
+MOCK ?= $(WITH_SUDO) /usr/bin/mock -r $(MOCK_CONFIG_VAL) $(MOCK_OPTS)
-
 
 ifneq ($(wildcard upstream),)
 __allsources := $(notdir $(strip $(shell cat upstream)))
@@ -89,20 +88,27 @@ prebuild-checks:
 #help files and rpms in the results directory of your package.  If there
 #help are mutlple tar.gz files for a package, make will do make sources,
 #help which creates a src.rpm file from the spec file.
+#help Use MOCK_OPTS environment varible to pass down arbitrary mock options.
 build: prebuild-checks configemail $(SPECFILE) upstream $(SRPMFILE)
 	$(MOCK) $(SRPMFILE) --result=results/ --no-cleanup-after --uniqueext=$(PKG_NAME)
-	@perl $(TOPLVL)/projects/common/logcheck.pl results/build.log
+	mkdir -p results/logs results/debuginfo
-	@perl $(TOPLVL)/projects/common/count.pl results/build.log &> testresults
+	mv results/*.log results/logs
+	-mv results/*-debuginfo*.rpm results/debuginfo/
+	@perl $(TOPLVL)/projects/common/logcheck.pl results/logs/build.log
+	@perl $(TOPLVL)/projects/common/count.pl results/logs/build.log &> testresults
 	@$(MAKE) checkblacklist
 
 #help build-nocheck: Same as 'make build', but do not run the package's test suite.
 build-nocheck: configemail $(SPECFILE) upstream $(SRPMFILE)
 	$(MOCK) $(SRPMFILE) --nocheck --result=results/ --no-cleanup-after --uniqueext=$(PKG_NAME)
-	@perl $(TOPLVL)/projects/common/logcheck.pl results/build.log
+	mkdir -p results/logs results/debuginfo
-	@perl $(TOPLVL)/projects/common/count.pl results/build.log &> testresults
+	mv results/*.log results/logs
+	-mv results/*-debuginfo*.rpm results/debuginfo/
+	@perl $(TOPLVL)/projects/common/logcheck.pl results/logs/build.log
+	@perl $(TOPLVL)/projects/common/count.pl results/logs/build.log &> testresults
 	@$(MAKE) checkblacklist
 
-fmvpatches: results/build.log
+fmvpatches: results/logs/build.log
 	@perl $(TOPLVL)/projects/common/fmvpatches.pl $(PKG_NAME)
 
 #help rootshell: Puts you in a root shell at the top of your build root.
@@ -117,7 +123,7 @@ shell:
 .PHONY: $(SRPMFILE)
 $(SRPMFILE): $(SPECFILE) $(__allsources) localreponotice
 	@$(MAKE) spdxcheck
-	$(MOCK) --buildsrpm --source=./ --spec=$(SPECFILE) --result=results/ --no-cleanup-after --uniqueext=$(PKG_NAME)
+	$(MOCK) --buildsrpm --source=./ --spec=$(SPECFILE) --result=results/srpm/ --no-cleanup-after --uniqueext=$(PKG_NAME)
 
 # Do a git fetch and a git rebase to apply local commits on top of latest
 # commits from the remote. A git fetch/rebase is used rather than a git pull so
@@ -150,10 +156,12 @@ pullrebase:
 
 #help autospec: automatically generates a specfile. If there is
 #help already a specfile, it will be overwritten. Several files used by
-#help autospec will be created in the process. For more information, see
+#help autospec will be created in the process.
-#help the project at https://github.com/clearlinux/autospec
+#help Use MOCK_OPTS environment varible to pass down arbitrary mock options
+#help to autospec.
+#help For more information, see the project at https://github.com/clearlinux/autospec
 autospec: pullrebase localreponotice
-	rm -f results/*src.rpm
+	rm -f results/srpm/*src.rpm
 	@if [ -e $(SPECFILE) ] && ! grep -q "# Generated by: autospec.py" $(SPECFILE) ; then \
 		echo "Specfile already exists and was not created by autospec.py! Aborting."; \
 		exit 1; \
@@ -166,6 +174,7 @@ autospec: pullrebase localreponotice
 		--name $(PKG_NAME) \
 		--archives $(ARCHIVES) \
 		--mock-config $(MOCK_CONFIG_VAL) \
+		--mock-opts "$(MOCK_OPTS)" \
 		$${SETVERSION:+ --version $${SETVERSION}} \
 		${NON_INTERACTIVE} ${SKIP_GIT} ${CLEANUP} \
 		$(firstword $(NEWURL) $(URL));
@@ -205,30 +214,12 @@ bumpnogit:
 
 $(__missingsources): sources
 
-#help sources: If SOURCES_URL is defined, download required upstream source
+# First argument is a Clear Linux build number (e.g. 22000)
-#help files from that location. Otherwise, try to extract source files from the
+define fetch-from-srpm
-#help SRPM in the latest Clear Linux release, as specified by the LATEST_SRPMS
+	tmp=$$(mktemp -d -p "."); \
-#help variable. This will run automatically, as a dependency. NOTE: A Koji
-#help server can make use of this "make sources" command, since it lives in a
-#help repo named "common". If you use this makefile in Koji, ensure
-#help "make sources" continues to work for both remote and local builds, since
-#help it is a prerequisite of several commands for building packages.
-sources: upstream
-ifneq ($(strip $(SOURCES_URL)),)
-	while read u; do \
-		case "$$u" in \
-		    "")    continue ;; \
-		    *://*) n="$$u" ;; \
-		    *)     n="$(SOURCES_URL)/$$u" ;; \
-		esac; \
-		curl --fail --noproxy "*" "$$n" -o `basename "$$n"`; \
-	done < upstream
-else
-	@tmp=$$(mktemp -d -p "."); \
 	srpm=$$(rpmspec --srpm -q --qf "%{NVR}.src.rpm\n" $(SPECFILE)); \
-	if cd "$$tmp" && ! curl -f -L -O $(LATEST_SRPMS)/$$srpm; then \
+	if cd "$$tmp" && ! curl -s -S -f -L -O $(MIRROR_CURL_OPTS) $(DOWNLOAD_MIRROR)/releases/$(1)/clear/source/SRPMS/$$srpm; then \
-		echo "Failed to download $$srpm from latest Clear Linux release." >&2; \
+		echo "Failed to download $$srpm from Clear Linux release $(1)." >&2; \
-		echo "Run \"git pull\" and try again." >&2; \
 		cd .. && rm -rf "$$tmp"; \
 		exit 1; \
 	fi; \
@@ -236,14 +227,58 @@ else
 	cd ..; \
 	srclist=$$(rpmspec --srpm -q --qf "[%{SOURCE}\n]" $(SPECFILE)); \
 	for s in $$srclist; do \
-		if ! mv "$$tmp"/$$s .; then \
+		if ! mv --no-clobber "$$tmp"/$$s .; then \
 			echo "Missing source file \"$$s\" in $${srpm}." >&2; \
 			rm -rf "$$tmp"; \
 			exit 1; \
 		fi; \
 		echo "Retrieved source file $$s ..."; \
 	done; \
-	rm -rf "$$tmp";
+	rm -rf "$$tmp"
+endef
+
+#help sources: If SOURCES_URL is defined, download required upstream source files
+#help from that location. Otherwise, try to download source files according to the
+#help URLs listed in the spec file. If any of the source files fail to download,
+#help check for the relevant SRPM from published releases of Clear Linux OS, and
+#help extract the files if found. Note that SRPMs are taken from the DOWNLOAD_MIRROR
+#help location. This will run automatically, as a dependency. NOTE: A Koji server can
+#help make use of this "make sources" command, since it lives in a repo named
+#help "common". If you use this makefile in Koji, ensure "make sources" continues to
+#help work for both remote and local builds, since it is a prerequisite of several
+#help commands for building packages.
+ifneq ($(strip $(SOURCES_URL)),)
+sources: upstream
+	while read u; do \
+		case "$$u" in \
+			"")    continue ;; \
+			*://*) n="$$u" ;; \
+			*)     n="$(SOURCES_URL)/$$u" ;; \
+		esac; \
+		if ! curl --fail -L -o `basename "$$n"` $(SOURCES_CURL_OPTS) "$$n"; then \
+			echo "Failed to download $$n"; \
+			exit 1; \
+		fi; \
+	done < upstream
+else
+sources:
+	@$(MAKE) generateupstream; \
+	[ $$? -eq 0 ] && exit 0; \
+	nvr="$$(rpmspec --srpm -q --qf '%{NAME}\t%{VERSION}\t%{RELEASE}\n' $(SPECFILE))"; \
+	latest_builds=$$(git -C $(TOPLVL)/projects/common tag -l | sort -rn); \
+	for b in $$latest_builds; do \
+		url="$(DOWNLOAD_MIRROR)/releases/$$b/clear/source/package-sources"; \
+		echo "Checking for source files in build $$b ..."; \
+		if grep -q "$$nvr" <(curl -s -f -L $(MIRROR_CURL_OPTS) $$url); then \
+			$(call fetch-from-srpm,$$b); \
+			if [ $$? -eq 0 ]; then \
+				echo "Source files retrieved from build $$b"; \
+				exit 0; \
+			fi; \
+		fi; \
+	done; \
+	echo "Source files not found for package"; \
+	exit 1
 endif
 
 prekoji-checks:
@@ -257,8 +292,14 @@ koji: prekoji-checks kojidef
 	@if ! git branch | grep -q -E '^\* master'; then \
 		echo "Error: Must be on the master branch to submit to koji" >&2; \
 		exit 1; \
+	fi; \
+	if ! git diff --quiet HEAD ${SPECFILE}; then \
+		echo "Error: All changes to ${SPECFILE} must be committed first" >&2; \
+		exit 1; \
+	fi; \
+	if git rev-parse --verify --quiet origin/master > /dev/null; then \
+		git pull --rebase; \
 	fi
-	git pull --rebase
 	git tag $(SRPMVERS)
 	git push origin master refs/tags/$(SRPMVERS)
 	$(KOJI_CMD) build $$KOJI_NOWAIT $(KOJI_TAG) $(PKG_BASE_URL)/$(PKG_NAME)?#$(SRPMVERS)
@@ -286,7 +327,7 @@ rekoji-nowait:
 	$(MAKE) KOJI_NOWAIT="--nowait --background" rekoji
 
 logcheck:
-	@perl $(TOPLVL)/projects/common/logcheck.pl results/build.log
+	@perl $(TOPLVL)/projects/common/logcheck.pl results/logs/build.log
 
 $(TOPLVL)/repo:
 	@echo "Creating local RPM repository $(TOPLVL)/repo"
@@ -296,8 +337,8 @@ $(TOPLVL)/repo:
 #help repoadd: Adds locally-built RPMs for this package to the local RPM
 #help repository. If this repository does not yet exist, it is created and
 #help enabled.
-repoadd: results/build.log $(TOPLVL)/repo
+repoadd: results/logs/build.log $(TOPLVL)/repo
-	@if [ -z "`grep '^Wrote: .*$(shell basename $(SRPMFILE))$$' results/build.log`" ]; then \
+	@if [ -z "`grep '^Wrote: .*$(shell basename $(SRPMFILE))$$' results/logs/build.log`" ]; then \
 		echo "You have not yet succesfully built this release yet"; exit 1; \
 	fi
 	@if [ -f .repo-index ]; then \
@@ -362,18 +403,25 @@ install:
 
 #help generateupstream: Run this rule to create or update the 'upstream' file
 #help by downloading the upstream source tarballs listed in the spec file and
-#help calculating their hashes. Autospec performs this step automatically, so ignore
+#help calculating their hashes. Autospec performs this step automatically, so
-#help it for packages managed with autospec.
+#help ignore it for packages managed with autospec. Additional curl options
+#help may be used for downloading the upstream source tarballs by defining the
+#help CURL_OPTS variable for this rule.
 generateupstream:
-	@rm -f upstream
+	@[ -e upstream ] && mv upstream upstream.bak; \
-	@urls=$$(rpmspec -D '_vendor clr' -P $(SPECFILE) | grep Source | cut -d: -f2- | grep '://'); \
+	urls=$$(rpmspec -D '_vendor clr' -P $(SPECFILE) | sed -n "s|^Source[0-9]*[[:blank:]]*:[[:blank:]]*\(..*://..*\)$$|\1|p"); \
 	for url in $$urls; do \
-	    filename=$$(basename $$url); \
+		filename=$$(basename $$url); \
-	    if [ ! -e $$filename ]; then \
+		if [ ! -e $$filename ]; then \
-		curl --fail -L -O $$url; \
+			if ! curl --fail -L -O $(CURL_OPTS) $$url; then \
-	    fi; \
+				echo "Failed to download $$url"; \
-	    echo $$(sha1sum $$filename | cut -d\  -f1)/$$filename >> upstream; \
+				[ -e upstream.bak ] && mv --no-clobber upstream.bak upstream; \
+				exit 1; \
+			fi; \
+		fi; \
+		echo $$(sha1sum $$filename | cut -d\  -f1)/$$filename >> upstream; \
 	done
+	@rm -f upstream.bak
 	@cat upstream
 
 #help drop-abandoned: Remove all unused patches from the git tree
@@ -382,3 +430,6 @@ drop-abandoned: $(SPECFILE)
 
 # Define site local common targets in a separate makefile
 -include $(TOPLVL)/projects/common/Makefile.common.site_local
+
+# Include optional extended makefiles from individual package repos
+-include Makefile.custom

Makefile.config

@@ -26,6 +26,9 @@ CGIT_BASE_URL =
 # Location of upstream tarball cache used by 'make build', 'make sources', etc.
 SOURCES_URL =
 
+# Additional curl options to use when downloading files from SOURCES_URL
+SOURCES_CURL_OPTS =
+
 # Location where package repos are hosted.
 PKG_BASE_URL = https://github.com/clearlinux-pkgs
 
@@ -38,6 +41,9 @@ PROJ_PKGS = autospec clr-bundles common
 # Clear Linux download mirror to use
 DOWNLOAD_MIRROR = https://cdn.download.clearlinux.org
 
+# Additional curl options to use when downloading files from DOWNLOAD_MIRROR
+MIRROR_CURL_OPTS =
+
 # Location of release content from latest Clear Linux release
 LATEST_RELEASE = $(DOWNLOAD_MIRROR)/current
 
@@ -48,17 +54,17 @@ LATEST_SRPMS = $(LATEST_RELEASE)/source/SRPMS
 PACKAGES_FILE = $(TOPLVL)/projects/common/packages
 
 # Configuration file for autospec.
-AUTOSPEC_CONF = $(TOPLVL)/projects/common/autospec.conf
+AUTOSPEC_CONF = $(TOPLVL)/projects/common/conf/autospec.conf
 
 # Set this variable to any non-empty value to use the package mappings stored
 # in "pkg-mapping" for cloning/pulling package repos.
 USE_PACKAGE_MAPPING = yes
 
-# Package manager config file. Default to the in-tree copy.
+# Package manager config file. Default to the in-tree copy of dnf.conf.
-PM_CONF = $(TOPLVL)/projects/common/image-creator/yum.conf
+PM_CONF = $(TOPLVL)/projects/common/conf/dnf.conf
 
 # Mock configuration file. Default to the in-tree copy.
-MOCK_CONF = $(TOPLVL)/projects/common/koji-client-files/clear.cfg
+MOCK_CONF = $(TOPLVL)/projects/common/conf/clear.cfg
 
 
 # Include any site local configuration variables. These variables may override

Makefile.shared

@@ -14,9 +14,9 @@ define loopup
 	@sudo partprobe /dev/loop$(DEVICE)
 	@sleep 1
 	@if [ -e /dev/loop$(DEVICE)p3 ]; then \
-	   sudo mount /dev/loop$(DEVICE)p3 $(TOPLVL)/image; \
+		sudo mount /dev/loop$(DEVICE)p3 $(TOPLVL)/image; \
 	else \
-	   sudo mount /dev/loop$(DEVICE)p2 $(TOPLVL)/image; \
+		sudo mount /dev/loop$(DEVICE)p2 $(TOPLVL)/image; \
 	fi
 	@sudo mount /dev/loop$(DEVICE)p1 $(TOPLVL)/image/boot
 endef

Makefile.toplevel

@@ -10,6 +10,7 @@ include $(TOPLVL)/projects/common/Makefile.shared
 SHELL   = /bin/bash
 
 PKGS    = $(shell cat $(PACKAGES_FILE))
+PKGS_LOCAL = $(sort $(filter ${PKGS},$(subst packages/,,$(wildcard packages/*))))
 
 proj_PKGS = $(addprefix proj_,$(PROJ_PKGS))
 clone_PKGS = $(addprefix clone_,$(PKGS))
@@ -64,7 +65,7 @@ cvecheck:
 #help of merge commits, while displaying any changes since your last pull. It is
 #help silent if there are no changes.
 .PHONY: pull ${PULL_PKGS} 
-PULL_PKGS:= $(addprefix PULL_projects/,$(PROJ_PKGS)) $(addprefix PULL_packages/,$(PKGS))
+PULL_PKGS:= $(addprefix PULL_projects/,$(PROJ_PKGS)) $(addprefix PULL_packages/,${PKGS_LOCAL})
 ${PULL_PKGS}:
 	@p=$(patsubst PULL_%,%,$@) ; \
 	if [ ! -d "$$p/.git" ]; then echo "Nothing to pull for $$p - $$p/.git missing"; exit 0; fi; \
@@ -191,12 +192,16 @@ provides:
 
 #help autospecnew: Creates a new autospec package with for a given URL=$(URL)
 #help with NAME=$(NAME). Several files used by autospec will be created in the
-#help process. For more information about autospec, see the project page on Github https://github.com/clearlinux/autospec
+#help process.
+#help Use MOCK_OPTS environment varible to pass down arbitrary mock options
+#help to autospec.
+#help For more information about autospec, see the project page on Github https://github.com/clearlinux/autospec
 autospecnew: localreponotice
 	@if [ -z $(NAME) ] || [ -z $(URL) ]; then \
 		echo "Please specify NAME and URL. The ARCHIVES variable is optional."; \
 		exit 1; \
 	fi
+	-$(MAKE) clone_$(NAME)
 	@if [ ! -d $(TOPLVL)/packages/$(NAME)/.git ]; then \
 		echo "no remote repository found, creating new package repository and running autospec"; \
 		mkdir -p $(TOPLVL)/packages/$(NAME); \
@@ -215,6 +220,7 @@ autospecnew: localreponotice
 			--name $(NAME) \
 			--archives $(ARCHIVES) \
 			--mock-config $(MOCK_CONFIG_VAL) \
+			--mock-opts "$(MOCK_OPTS)" \
 			$${SETVERSION:+ --version $${SETVERSION}} \
 			${NON_INTERACTIVE} ${SKIP_GIT} ${CLEANUP} \
 			$(URL); \

README.md

@@ -31,43 +31,13 @@ $ ./user-setup.sh
 After the script completes, make sure to logout and login again to complete the
 setup process.
 
-The script either accepts no options, or all (3) options in case you are
+The script accepts several options, or no options at all. The options are
-configuring the Koji CLI for remote building on a Koji server. The options are
+documented in the script's `--help` output. Note that if you are supplying any
-documented in the script's `--help` output.
+of the three Koji cert options (`-k`, `-s`, or `-c`), the other two options
+must be supplied as well.
 
-### Manual setup
+If you do not wish to run the user-setup script, see the "Manual setup" section
-
+below for hints about how to initialize the tooling workspace.
-On your Clear Linux system, create a workspace for Clear Linux development
-work:
-
-```
-$ mkdir clearlinux
-```
-
-Clone this repo into a `projects` directory within the workspace:
-
-```
-$ cd clearlinux
-$ mkdir projects
-$ git clone https://github.com/clearlinux/common projects/common
-```
-
-Create the toplevel tooling Makefile:
-
-```
-$ ln -s projects/common/Makefile.toplevel Makefile
-```
-
-Clone all Clear Linux package and project repositories:
-
-```
-$ make clone
-```
-
-Note: You can clone the repos in parallel by using make's `-j` option.
-
-At this point, the `packages` directory will contain all Clear Linux package
-repos, and `projects` will contain common, clr-bundles, and autospec repos.
 
 ## Example usage
 
@@ -141,3 +111,66 @@ package, a `make bump` command is available for this purpose.
 $ make bump
 $ make build
 ```
+
+## Other topics
+
+### Customizing the mock config
+
+In the past, the various make commands that call `mock` required a mock config
+installed at `/etc/mock/clear.cfg`. However, at present, the commands will
+instead use the mock config within this repo (`conf/clear.cfg`).
+
+If you wish to use a custom mock config, you must override the `MOCK_CONF`
+variable to specify a different value to pass to mock's `-r` option. The value
+is either a full path that ends with `.cfg`, or a config NAME installed at
+`/etc/mock/<NAME>.cfg`. You can override the `MOCK_CONF` config variable by
+redefining it in `Makefile.config.site_local`, which must reside at the
+toplevel directory in this repo.
+
+For example, to retain the old behavior of mock using `/etc/mock/clear.cfg`,
+add this line to `Makefile.config.site_local`:
+
+```
+MOCK_CONF = /etc/mock/clear.cfg
+```
+
+If `Makefile.config.site_local` doesn't exist already, create it.
+
+### Manual setup
+
+If you did not run the user-setup script (see "Automated setup" section above),
+you will want to set up the developer tooling workspace manually. This section
+provides general documentation for the manual setup process, and it is not
+meant to be exhaustive.
+
+On your Clear Linux system, create a workspace for Clear Linux development
+work:
+
+```
+$ mkdir clearlinux
+```
+
+Clone this repo into a `projects` directory within the workspace:
+
+```
+$ cd clearlinux
+$ mkdir projects
+$ git clone https://github.com/clearlinux/common projects/common
+```
+
+Create the toplevel tooling Makefile:
+
+```
+$ ln -s projects/common/Makefile.toplevel Makefile
+```
+
+Clone all Clear Linux package and project repositories:
+
+```
+$ make clone
+```
+
+Note: You can clone the repos in parallel by using make's `-j` option.
+
+At this point, the `packages` directory will contain all Clear Linux package
+repos, and `projects` will contain common, clr-bundles, and autospec repos.

conf/README.md

@@ -0,0 +1,31 @@
+# Configuration files
+
+This directory contains various configuration files used by the developer
+tooling framework.
+
+Unless otherwise noted in the config file documentation below, the config files
+can be modified with custom, site-local changes by modifying a variable in
+`Makefile.config.site_local` to point to a location of your choice (e.g.
+somewhere in `/etc`). The framework will then read the config file from the
+location you have specified instead, so copy the in-tree copy to that location
+as a starting point if you need to.
+
+* `autospec.conf`: default Autospec configuration file used by `make autospec`
+  and `make autospecnew`. All configuration is commented out by default, so
+  default Autospec settings are used. Config variable: `AUTOSPEC_CONF`
+
+* `clear.cfg`: default Mock configuration file used by various targets that
+  call out to Mock. Config variable: `MOCK_CONF`
+
+* `dnf.conf`: DNF conf for use as the package manager configuration file, made
+  available for the framework's local repo support. Config variable: `PM_CONF`
+
+* `yum.conf`: YUM conf for use as the package manager configuration file, made
+  available for the framework's local repo support. Config variable: `PM_CONF`
+
+* `koji.conf`: template Koji configuration file. It is installed by
+  `user-setup.sh` to `/etc/koji.conf`, and the in-tree copy is not used. If you
+  are using Koji with the framework, you will need to modify `/etc/koji.conf`
+  according to how the Koji instance is set up for your environment. Configuring
+  the installation location via `Makefile.config.site_local` is not possible at
+  the moment but is a planned feature.

conf/autospec.conf

@@ -18,6 +18,10 @@
 # an absolute path or a path relative to this autospec.conf.
 #packages_file =
 
-# Path to yum config, used for generating whatrequires. It can be an absolute
+# Path to dnf/yum config, used for generating whatrequires. It can be an absolute
 # path or a path relative to this autospec.conf.
 #yum_conf =
+
+# Path to autospec failed patterns directory, used to match build failure lines to
+# package dependencies.
+#failed_pattern_dir =

conf/clear.cfg

@@ -8,15 +8,18 @@ config_opts['useradd'] = '/usr/sbin/useradd -m -u %(uid)s -g %(gid)s -d %(home)s
 config_opts['plugin_conf']['ccache_enable'] = False
 config_opts['releasever'] = 'clear'
 config_opts['package_manager'] = 'dnf'
+config_opts['chrootgroup'] = 'mockbuild'
+config_opts['use_bootstrap_container'] = False
 
 
-config_opts['yum.conf'] = """
+config_opts['dnf.conf'] = """
 
 [main]
-cachedir=/var/cache/yum
+cachedir=/var/cache/dnf
+keepcache=1
 debuglevel=1
 reposdir=/dev/null
-logfile=/var/log/yum.log
+logfile=/var/log/dnf.log
 retries=20
 obsoletes=1
 gpgcheck=0

conf/dnf.conf

@@ -0,0 +1,24 @@
+[main]
+keepcache=1
+debuglevel=1
+logfile=/var/log/dnf.log
+exactarch=1
+obsoletes=1
+gpgcheck=0
+plugins=0
+retries=10
+installonly_limit=3
+reposdir=/root/mash
+
+[clear]
+name=Clear
+baseurl=https://cdn.download.clearlinux.org/current/x86_64/os/
+enabled=1
+gpgcheck=0
+
+[clear-source]
+name=Clear sources
+failovermethod=priority
+baseurl=https://cdn.download.clearlinux.org/current/source/SRPMS/
+enabled=1
+gpgcheck=0

fmvpatches.pl

@@ -82,7 +82,7 @@ sub find_file {
     return $file;
 }
 
-open(BUILD_LOG, '<', "results/build.log") or die $!;
+open(BUILD_LOG, '<', "results/logs/build.log") or die $!;
 while (<BUILD_LOG>) {
     if($_ =~ /(\S+):([0-9]*):([0-9]*): note: (basic block|loop) (vectorized)/) {
 	$fmv->{s_name} = (split('/',$1))[-1];

provides.sh

@@ -23,7 +23,7 @@ if [ "$#" -eq 0 ]; then
 fi
 
 if [ ! -e /etc/yum.conf ]; then
-  echo "Error: yum.conf is missing. Please copy projects/common/image-creator/yum.conf to /etc"
+  echo "Error: yum.conf is missing. Please copy projects/common/conf/yum.conf to /etc"
   exit 1
 fi
 

start_qemu.sh

@@ -54,4 +54,5 @@ qemu-system-x86_64 \
     -drive file="$IMAGE",if=virtio,aio=threads,format=raw \
     -netdev user,id=mynet0,hostfwd=tcp::${VMN}0022-:22,hostfwd=tcp::${VMN}2375-:2375 \
     -device virtio-net-pci,netdev=mynet0 \
+    -device virtio-rng-pci \
     -debugcon file:debug.log -global isa-debugcon.iobase=0x402 $@

user-setup.sh

@@ -1,102 +1,131 @@
-#!/bin/sh
+#!/bin/bash
 
 SCRIPT=$(/usr/bin/basename $0)
 PEM=""
 SERVERCA=""
 CLIENTCA=""
+WORKSPACE="clearlinux"
+PACKAGE_REPOS=
 
 help() {
-	printf "%s\n" >&2 "Usage: $SCRIPT [options]" \
+  printf "%s\n" >&2 "Usage: $SCRIPT [options]" \
-			  "" \
+    "" \
-			  "Options:" \
+    "Options:" \
-			  "-k --client-cert PEM_FILE: Enable client user cert for koji configuration; requires a PEM file argument" \
+    "" \
-			  "-s --server-ca PEM_FILE: Enable server CA cert for koji configuration; requires a PEM file argument" \
+    "-d --directory NAME: Set up workspace in the given directory." \
-			  "-c --client-ca PEM_FILE: Enable client CA cert for koji configuration; requires a PEM file argument" \
+    "-a --clone-packages: Clone all package repos." \
-			  ""
+    "-j --jobs [NUM]: Clone repos with NUM jobs. If NUM is not given, it is set to the available CPU count." \
+    "" \
+    "-k --client-cert PEM_FILE: Enable client user cert for koji configuration; requires a PEM file argument" \
+    "-s --server-ca PEM_FILE: Enable server CA cert for koji configuration; requires a PEM file argument" \
+    "-c --client-ca PEM_FILE: Enable client CA cert for koji configuration; requires a PEM file argument" \
+    ""
+}
+
+error() {
+  echo -e "Error: $1\n" >&2
+  help
+  exit 1
 }
 
 while [ $# -gt 0 ]; do
-	case "$1" in
+  case "$1" in
-		"--help"|"-h")
+    "--help"|"-h")
-			help
+      help
-			exit 0
+      exit 0
-			;;
+      ;;
-		"--client-cert"|"-k")
+    "--client-cert"|"-k")
-			shift
+      shift
-			PEM="$PWD/$1"
+      PEM="$(realpath $1)"
-			;;
+      ;;
-		"--server-ca"|"-s")
+    "--server-ca"|"-s")
-			shift
+      shift
-			SERVERCA="$PWD/$1"
+      SERVERCA="$(realpath $1)"
-			;;
+      ;;
-		"--client-ca"|"-c")
+    "--client-ca"|"-c")
-			shift
+      shift
-			CLIENTCA="$PWD/$1"
+      CLIENTCA="$(realpath $1)"
-			;;
+      ;;
-		*)
+    "--jobs"|"-j")
-			help
+      if echo "$2" | grep -qx "[1-9][0-9]*"; then
-			exit 1
+        shift
-			;;
+        JOBS="$1"
-	esac
+      elif [ -f /proc/cpuinfo ]; then
-	shift
+        JOBS=$(grep -Ec '^processor.*:.*[0-9]+$' /proc/cpuinfo)
+      fi
+      ;;
+    "--directory"|"-d")
+      [ -z "$2" ] && error "Must supply a directory name to the -d option"
+      [ "${2:0:1}" = "-" ] && error "Directory name cannot begin with \"-\""
+      shift
+      WORKSPACE="$1"
+      ;;
+    "--clone-packages"|"-a")
+      PACKAGE_REPOS=1
+      ;;
+    *)
+      help
+      exit 1
+      ;;
+  esac
+  shift
 done
 
-error() {
-	echo -e "Error: $1\n" >&2
-	help
-	exit 1
-}
 
 if [ -z "$PEM" ] && [ -z "$SERVERCA" ] && [ -z "$CLIENTCA" ]; then
-	USE_KOJI=
+  USE_KOJI=
 else
-	if [ -z "$PEM" ] || [ -z "$SERVERCA" ] || [ -z "$CLIENTCA" ]; then
+  if [ -z "$PEM" ] || [ -z "$SERVERCA" ] || [ -z "$CLIENTCA" ]; then
-		error "Must specify all three command line options (or none)"
+    error "Must specify all three command line options (or none)"
-	fi
+  fi
-	if [ ! -f "$PEM" ]; then
+  if [ ! -f "$PEM" ]; then
-		error "Missing koji client PEM key file"
+    error "Missing koji client PEM key file"
-	fi
+  fi
-	if [ ! -f "$SERVERCA" ]; then
+  if [ ! -f "$SERVERCA" ]; then
-		error "Missing koji server CA PEM file"
+    error "Missing koji server CA PEM file"
-	fi
+  fi
-	if [ ! -f "$CLIENTCA" ]; then
+  if [ ! -f "$CLIENTCA" ]; then
-		error "Missing koji client CA PEM file"
+    error "Missing koji client CA PEM file"
-	fi
+  fi
-	USE_KOJI="yes"
+  USE_KOJI="yes"
+fi
+
+if [ -n "$JOBS" ]; then
+  JOBS_ARG="-j $JOBS"
+fi
+
+if [ -d "$WORKSPACE" ]; then
+  error "Directory \"$WORKSPACE\" already exists. \
+Either remove this workspace, or use a different workspace name."
 fi
 
 required_progs() {
-	local bindir="/usr/bin"
+  local bindir="/usr/bin"
-	for f in git mock rpm rpmbuild ; do
+  for f in git mock rpm rpmbuild ; do
-		[ ! -x "${bindir}/${f}" ] && missing+="${f} "
+    [ ! -x "${bindir}/${f}" ] && missing+="${f} "
-	done
+  done
-	[ "$PEM" ] && [ ! -x /usr/bin/koji ] && missing+="koji "
+  [ "$PEM" ] && [ ! -x /usr/bin/koji ] && missing+="koji "
-	if [ -n "$missing" ]; then
+  if [ -n "$missing" ]; then
-		echo "Install the following programs and re-run this script:" >&2
+    echo "Install the following programs and re-run this script:" >&2
-		echo $missing >&2
+    echo $missing >&2
-		echo 'All programs should be provided in the "os-clr-on-clr" bundle.' >&2
+    echo 'All programs should be provided in the "os-clr-on-clr" bundle.' >&2
-		exit 1
+    exit 1
-	fi
+  fi
 }
 
 required_progs
 
-echo 'Initializing development workspace in "clearlinux" . . .'
+echo "Initializing development workspace in \"$WORKSPACE\" . . ."
-if [ -d "clearlinux" ]; then
-	echo 'Directory "clearlinux" already exists in current directory.' >&2
-	echo "Cannot initialize workspace." >&2
-	exit 1
-fi
 
-mkdir clearlinux
+mkdir "$WORKSPACE"
-cd clearlinux
+cd "$WORKSPACE"
 
 echo "Setting up common repo . . ."
 mkdir projects
 git clone https://github.com/clearlinux/common projects/common
 if [ $? -ne 0 ]; then
-	echo "Failed to clone common repo." >&2
+  echo "Failed to clone common repo." >&2
-	exit 1
+  exit 1
 fi
 
 # Finish setup for packages/projects hierarchy
@@ -105,48 +134,52 @@ mkdir -p packages/common
 ln -sf ../../projects/common/Makefile.common packages/common/Makefile.common
 
 if [ "$USE_KOJI" ]; then
-	echo "Setting up koji certs . . ."
+  echo "Setting up koji certs . . ."
-	mkdir -p ~/.koji
+  mkdir -p ~/.koji
-	cp "$PEM" ~/.koji/client.crt
+  cp "$PEM" ~/.koji/client.crt
-	cp "$CLIENTCA" ~/.koji/clientca.crt
+  cp "$CLIENTCA" ~/.koji/clientca.crt
-	cp "$SERVERCA" ~/.koji/serverca.crt
+  cp "$SERVERCA" ~/.koji/serverca.crt
 
-	if [ ! -f /etc/koji.conf ]; then
+  if [ ! -f /etc/koji.conf ]; then
-		echo "Setting up koji config . . ."
+    echo "Setting up koji config . . ."
-		sudo cp projects/common/koji-client-files/koji.conf /etc
+    sudo cp projects/common/conf/koji.conf /etc
-	fi
+  fi
-fi
-
-if [ ! -f /etc/mock/clear.cfg ]; then
-	echo "Setting up mock config . . ."
-	sudo mkdir -p /etc/mock
-	sudo cp projects/common/koji-client-files/clear.cfg /etc/mock
 fi
 
 echo "Adding user to kvm group . . ."
 sudo usermod -a -G kvm $USER
 
 echo "Cloning special project repositories . . ."
-make clone-projects
+make ${JOBS_ARG} clone-projects
 
-if [ -z "$NO_PACKAGE_REPOS" ]; then
+if [ -n "$PACKAGE_REPOS" ]; then
-	echo "Cloning all package repositories . . ."
+  echo "Cloning all package repositories . . ."
-	make clone-packages
+  make ${JOBS_ARG} clone-packages
 fi
 
+echo "Creating mix workspace . . ."
+mkdir -p mix
+
 if [ "$USE_KOJI" ]; then
-	echo "Testing koji installation . . ."
+  echo "Testing koji installation . . ."
-	if koji moshimoshi; then
+  if koji moshimoshi; then
-		echo -en "\n************************\n\n"
+    echo -en "\n************************\n\n"
-		echo "Koji installed and configured successfully"
+    echo "Koji installed and configured successfully"
-	else
+  else
-		echo -en "\n************************\n\n"
+    echo -en "\n************************\n\n"
-		echo "Error with koji installation or configuration" >&2
+    echo "Error with koji installation or configuration" >&2
-		exit 1
+    exit 1
-	fi
+  fi
 fi
 
 echo -en "\n************************\n"
 
-echo 'Workspace has been set up in the "clearlinux" directory'
+echo "Workspace has been set up in \"$WORKSPACE\""
+if [ -z "$PACKAGE_REPOS" ]; then
+  echo "NOTE: To clone all package repos, run \"cd $WORKSPACE; make [-j NUM] clone-packages\""
+  echo "NOTE: To clone a single package repo with NAME, run \"cd $WORKSPACE; make clone_NAME\""
+fi
 echo 'NOTE: logout and log back in to finalize the setup process'
+
+
+# vi: ft=sh sw=2 et sts=2