diff --git a/source/clear-linux/tutorials/smb/figures/smb-1.png b/source/clear-linux/tutorials/smb/figures/smb-1.png
new file mode 100644
index 00000000..8b0b4196
Binary files /dev/null and b/source/clear-linux/tutorials/smb/figures/smb-1.png differ
diff --git a/source/clear-linux/tutorials/smb/figures/smb-2.png b/source/clear-linux/tutorials/smb/figures/smb-2.png
new file mode 100644
index 00000000..f7a852ff
Binary files /dev/null and b/source/clear-linux/tutorials/smb/figures/smb-2.png differ
diff --git a/source/clear-linux/tutorials/smb/smb.rst b/source/clear-linux/tutorials/smb/smb.rst
new file mode 100644
index 00000000..2fb02220
--- /dev/null
+++ b/source/clear-linux/tutorials/smb/smb.rst
@@ -0,0 +1,131 @@
+.. _clear-samba-share-to-Windows:
+
+Enable simple file sharing with a Windows\* machine using Samba\*
+#################################################################
+
+This tutorial describes how to enable simple file sharing from a system
+running |CLOSIA| to a Windows machine using Samba. For more advanced sharing,
+refer to the `Samba guide`_.
+
+Prerequisites
+*************
+
+This tutorial assumes you have installed |CL| on your host system. For
+detailed instructions, follow the steps in :ref:`bare-metal-install`.
+
+Before you install any new packages, update |CL| with the following command:
+
+.. code-block:: bash
+
+   sudo swupd update
+
+
+Set up file sharing
+*******************
+
+#.	Log in and get root privileges.
+
+	.. code-block:: bash
+
+		sudo -s
+
+#.	Add the storage-utils bundle, which includes the Samba binaries.
+
+	.. code-block:: bash
+
+		swupd bundle-add storage-utils
+
+	.. note::
+
+		The os-clr-on-clr bundle also includes the Samba binaries.
+
+#.	Create a configuration file called :file:`/etc/samba/smb.conf`. In this
+	example, `[Downloads]` enables a folder share with a specific user.
+	`[Documents]` enables a folder share with any user. The example assumes that a
+	user account `clearlinuxuser` already exists.
+
+	If `valid users` is not specified, then anyone with a user account on the
+	machine and with their Samba password already set can access the folder.
+	However, the account is only able to access files and folders for which
+	they have appropriate permissions.
+
+	Use :command:`chown` or :command:`chmod` to change either the owner of the
+	file or the permissions to allow other users to access the file.
+
+	.. code-block:: console
+
+		[Global]
+		map to guest = bad user
+
+		[Downloads]
+		path=/home/clearlinuxuser/Downloads
+		read only = no
+		guest ok = no
+		valid users = clearlinuxuser
+
+		[Documents]
+		path=/home/clearlinuxuser/Documents
+		read only = no
+		browsable = yes
+		guest ok = yes
+
+#.	Enable the Samba daemon to start every time.
+
+	.. code-block:: bash
+
+		systemctl enable smb
+		systemctl start smb
+
+#.	Use :command:`smbpasswd` to add the initial password for the user
+	account to access the share. Be aware that Samba maintains its own list of
+	passwords for user accounts. The Samba password list can be different than
+	the password used to log in.
+
+	.. code-block:: bash
+
+		smbpasswd -a clearlinuxuser
+
+Setup is complete and a Windows machine on the same network can access the
+shares. Windows uses the format :file:`\\\\[server IP or hostname]\\folder` to
+access shares. Access the shares directly with Windows Explorer or by
+mapping a network drive.
+
+Use the IP address of the |CL| machine for an easy access method. If the
+|CL| machine is behind an Active Directory domain controller or a DNS server,
+use the hostname of the |CL| machine. For other ways to access shares using a
+hostname instead of an IP address, see `Chapter 7 of the Samba guide`_.
+
+
+Map Clear Linux drive in Windows
+********************************
+
+#.	Open Windows Explorer and click on the left sidebar on :guilabel:`This PC`
+	to change the options available at the top.
+
+#.	Click the :guilabel:`Map Network Drive` icon and enter the path in the
+	format: :file:`\\\\[server IP or hostname]\\[shared folder]`
+
+#.	Check the box :guilabel:`Connect using different credentials`. Enter
+	the Samba user `clearlinuxuser` and the password created with
+	:command:`smbpasswd`. See Figure 1 for details.
+
+	.. figure:: figures/smb-1.png
+		:scale: 70%
+		:alt: Map a network drive in Windows Explorer
+
+		Figure 1: Map a network drive in Windows Explorer.
+
+When complete, Windows Explorer displays the share drive as shown in Figure 2.
+
+.. figure:: figures/smb-2.png
+	:scale: 70%
+	:alt: View a share drive in Windows Explorer
+
+	Figure 2: View a share drive in Windows Explorer.
+
+
+
+
+
+.. _Samba guide: https://www.samba.org/samba/docs/using_samba/ch00.html
+.. _Chapter 7 of the Samba guide: https://www.samba.org/samba/docs/using_samba/ch07.html
diff --git a/source/clear-linux/tutorials/tutorials.rst b/source/clear-linux/tutorials/tutorials.rst
index b5bb7011..3cbb1f17 100644
--- a/source/clear-linux/tutorials/tutorials.rst
+++ b/source/clear-linux/tutorials/tutorials.rst
@@ -18,4 +18,5 @@ specific |CLOSIA| use cases.
    fmv
    aws-web/aws-web
    telemetry-backend/telemetry-backend
+   smb/smb
    spark